diff --git a/src/Gui/Language/FreeCAD_af.qm b/src/Gui/Language/FreeCAD_af.qm index 7d2d906ed0..11306b775e 100644 Binary files a/src/Gui/Language/FreeCAD_af.qm and b/src/Gui/Language/FreeCAD_af.qm differ diff --git a/src/Gui/Language/FreeCAD_af.ts b/src/Gui/Language/FreeCAD_af.ts index a098472d41..6799b34e26 100644 --- a/src/Gui/Language/FreeCAD_af.ts +++ b/src/Gui/Language/FreeCAD_af.ts @@ -487,13 +487,9 @@ while doing a left or right click and move the mouse up or down Choose Icon Kies ikoon - - Add icons... - Voeg ikone by... - Icon folders... - + Icon folders... @@ -943,87 +939,87 @@ Definieer asseblief 'n ander kortpad. Aluminium - + Aluminium Brass - + Brass Bronze - + Bronze Copper - + Copper Chrome - + Chrome Emerald - + Emerald Gold - + Gold Jade - + Jade Metalized - + Metalized Neon GNC - + Neon GNC Neon PHC - + Neon PHC Obsidian - + Obsidian Pewter - + Pewter Plaster - + Plaster Plastic - + Plastic Ruby - + Ruby Satin - + Satin Shiny plastic - + Shiny plastic Silver - + Silver Steel - + Steel Stone - + Stone @@ -1599,13 +1595,9 @@ Spesifiseer asseblief 'n ander gids. No selection Geen keuse - - Please select an object of the list - Please select an object of the list - Please select an object from the list - + Please select an object from the list @@ -1980,75 +1972,75 @@ Spesifiseer asseblief 'n ander gids. Authoring and License - + Authoring and License Author name - + Author name <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> - + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> If this is checked, the "Last modified by" field will be set when saving the file - + If this is checked, the "Last modified by" field will be set when saving the file Set on save - + Set on save Company - + Company Default license - + Default license The default license for new documents - + The default license for new documents All rights reserved - + All rights reserved CreativeCommons Attribution - + CreativeCommons Attribution CreativeCommons Attribution-ShareAlike - + CreativeCommons Attribution-ShareAlike CreativeCommons Attribution-NoDerivatives - + CreativeCommons Attribution-NoDerivatives CreativeCommons Attribution-NonCommercial - + CreativeCommons Attribution-NonCommercial CreativeCommons Attribution-NonCommercial-ShareAlike - + CreativeCommons Attribution-NonCommercial-ShareAlike CreativeCommons Attribution-NonCommercial-NoDerivatives - + CreativeCommons Attribution-NonCommercial-NoDerivatives Public Domain - + Public Domain FreeArt - + FreeArt Other - + Other License URL @@ -2056,15 +2048,15 @@ Spesifiseer asseblief 'n ander gids. An URL where the user can find more details about the license - + An URL where the user can find more details about the license http://en.wikipedia.org/wiki/All_rights_reserved - + http://en.wikipedia.org/wiki/All_rights_reserved The default company to use for new files - + The default company to use for new files @@ -2160,10 +2152,6 @@ Spesifiseer asseblief 'n ander gids. Black Swart - - Transparent - Deursigtig - Image dimensions Beelddimensies @@ -2655,32 +2643,28 @@ Spesifiseer asseblief 'n ander gids. Gui::Dialog::IconDialog - - Add icon - Voeg ikoon by - Icon folders - + Icon folders Add icon folder - + Add icon folder Gui::Dialog::IconFolders Add or remove custom icon folders - + Add or remove custom icon folders Remove folder - + Remove folder Removing a folder only takes effect after an application restart. - + Removing a folder only takes effect after an application restart. @@ -2934,11 +2918,11 @@ Spesifiseer asseblief 'n ander gids. Incorrect quantity - + Incorrect quantity There are input fields with incorrect input, please ensure valid placement values! - + There are input fields with incorrect input, please ensure valid placement values! @@ -3178,39 +3162,39 @@ Spesifiseer asseblief 'n ander gids. Search - + Search Searches object labels - + Searches object labels Clears the search field - + Clears the search field Select only - + Select only Selects only this object - + Selects only this object Deselect - + Deselekteer Deselects this object - + Deselects this object Zoom fit - + Zoom fit Selects and fits this object in the 3D window - + Selects and fits this object in the 3D window Go to selection @@ -3218,7 +3202,7 @@ Spesifiseer asseblief 'n ander gids. Selects and locates this object in the tree view - + Selects and locates this object in the tree view @@ -3471,7 +3455,7 @@ Wil jy jou veranderinge stoor? Gui::LabelEditor List - + List @@ -3670,7 +3654,7 @@ In die linkeraansig is %1 punte gekies, in die regteraansig is %2 punte gekies.< Clear list - + Clear list @@ -4188,7 +4172,7 @@ Wil jy 'n ander gids aangee? Input in line %1 is not a number - + Input in line %1 is not a number @@ -4429,10 +4413,6 @@ Do you want to continue? Unsaved document Ongestoorde dokument - - Save document before close? - Stoor dokument voor jy dit toe maak? - Save Macro Stoor Makro @@ -4589,11 +4569,11 @@ You either have to finish or cancel the editing in the task panel. Do you want to save your changes to document '%1' before closing? - + Do you want to save your changes to document '%1' before closing? If you don't save, your changes will be lost. - + If you don't save, your changes will be lost. @@ -5371,11 +5351,11 @@ You either have to finish or cancel the editing in the task panel. Cannot open file - + Cannot open file Loading the file %1 is not supported - + Loading the file %1 is not supported @@ -6130,21 +6110,13 @@ You either have to finish or cancel the editing in the task panel. Standard-View Standaardaansig - - Stereo red/green - Stereo rooi/groen - - - Switch stereo viewing to red/green - Verander stereo vertoning na rooi/groen - Stereo red/cyan - + Stereo red/cyan Switch stereo viewing to red/cyan - + Switch stereo viewing to red/cyan @@ -6245,11 +6217,11 @@ You either have to finish or cancel the editing in the task panel. FreeCAD-VR - + FreeCAD-VR Extend the FreeCAD 3D Window to a Oculus Rift - + Extend the FreeCAD 3D Window to a Oculus Rift diff --git a/src/Gui/Language/FreeCAD_cs.qm b/src/Gui/Language/FreeCAD_cs.qm index f33123d161..b42ab89dc2 100644 Binary files a/src/Gui/Language/FreeCAD_cs.qm and b/src/Gui/Language/FreeCAD_cs.qm differ diff --git a/src/Gui/Language/FreeCAD_cs.ts b/src/Gui/Language/FreeCAD_cs.ts index 8ecd5f97ce..597f1902b6 100644 --- a/src/Gui/Language/FreeCAD_cs.ts +++ b/src/Gui/Language/FreeCAD_cs.ts @@ -239,13 +239,12 @@ Press middle and left or right mouse button - Press middle and left or right mouse button + Stiskni prostřední a levé nebo pravé tlačítko myši Scroll middle mouse button or keep middle button pressed while doing a left or right click and move the mouse up or down - Scroll middle mouse button or keep middle button pressed -while doing a left or right click and move the mouse up or down + Rolujte prostředním tlačítkem myši nebo držte prostřední tlačítko zmáčknuté během stisknutí levého nebo pravého tlačítka a pohybujte myší nahoru nebo dolů @@ -313,7 +312,7 @@ while doing a left or right click and move the mouse up or down Word size - Word size + Velikost slova @@ -355,7 +354,7 @@ while doing a left or right click and move the mouse up or down Clipping custom direction - Clipping custom direction + Oříznutí vlastním směrem View @@ -363,7 +362,7 @@ while doing a left or right click and move the mouse up or down Adjust to view direction - Adjust to view direction + Nastavit na směr pohledu Direction @@ -474,11 +473,11 @@ while doing a left or right click and move the mouse up or down Site: - Site: + Stránka: %1 at %2 - %1 at %2 + %1 z %2 @@ -487,13 +486,9 @@ while doing a left or right click and move the mouse up or down Choose Icon Zvolte ikonu - - Add icons... - Přidat ikony... - Icon folders... - + Složky ikon... @@ -942,87 +937,87 @@ Please define another shortcut. Aluminium - + Hliník Brass - + Mosaz Bronze - + Brnoz Copper - + Měď Chrome - + Chrom Emerald - + Smaragd Gold - + Zlato Jade - + Nefrit Metalized - + Metalizované Neon GNC - + Neon GNC Neon PHC - + Neon PHC Obsidian - + Obsidián Pewter - + Cín Plaster - + Sádra Plastic - + Plast Ruby - + Rubín Satin - + Satén Shiny plastic - + Lesklý plast Silver - + Stříbro Steel - + Ocel Stone - + Kámen @@ -1132,11 +1127,11 @@ Please define another shortcut. Enable tiled background - Enable tiled background + Povolit dlaždicové pozadí Style sheet: - Style sheet: + Formát listu: @@ -1159,7 +1154,7 @@ Please define another shortcut. No style sheet - No style sheet + Bez stylů @@ -1315,7 +1310,7 @@ Tento soubor již existuje. You have no write permission for the directory. Please, choose another one. - You have no write permission for the directory. Please, choose another one. + Nemáš práva pro zápis do tohoto adresáře. Prosím, zvol jiný. @@ -1513,15 +1508,15 @@ Specify another directory, please. License information: - License information: + Informace o licenci: License URL - License URL + URL licence Open in browser - Open in browser + Otevři v prohlížeči @@ -1587,23 +1582,19 @@ Specify another directory, please. Gui::Dialog::DlgPropertyLink Link - Link + Odkaz Show all object types - Show all object types + Zobraz všechny typy objektů No selection Žádný výběr - - Please select an object of the list - Please select an object of the list - Please select an object from the list - + Prosím vyberte objekt ze seznamu @@ -1792,7 +1783,7 @@ Specify another directory, please. Line Smoothing - Line Smoothing + Vyhlazování čáry MSAA 2x @@ -1977,91 +1968,91 @@ Specify another directory, please. Authoring and License - + Autorství a licence Author name - + Jméno autora <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> - + <html><head/><body><p>Jméno pro použití při vytvoření dokumentu.</p><p>Pro anonymitu nechte prázdné.</p><p>Můžete také použít tvar:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> If this is checked, the "Last modified by" field will be set when saving the file - + Je-li zaškrtnuto, políčko "Naposledy upravil" bude vyplněno při ukládání souboru Set on save - + Nastavit při ukládání Company - + Společnost Default license - + Výchozí licence The default license for new documents - + Výchozí licence pro nové dokumenty All rights reserved - + Všechna práva vyhrazena CreativeCommons Attribution - + Creative Commons Uveďte autora CreativeCommons Attribution-ShareAlike - + Creative Commons Uveďte autora - Zachovejte licenci CreativeCommons Attribution-NoDerivatives - + CreativeCommons Uveďte autora – Nezpracovávejte CreativeCommons Attribution-NonCommercial - + Creative Commons Uveďte autora – Neužívejte komerčně CreativeCommons Attribution-NonCommercial-ShareAlike - + Creative Commons Uveďte autora – Neužívejte komerčně – Zachovejte licenci CreativeCommons Attribution-NonCommercial-NoDerivatives - + CreativeCommons Uveďte autora – Neužívejte komerčně – Nezpracovávejte Public Domain - + Veřejná doména FreeArt - + FreeArt Other - + Jiný License URL - License URL + URL licence An URL where the user can find more details about the license - + URL, kde může uživatel najít podrobnosti o licenci http://en.wikipedia.org/wiki/All_rights_reserved - + http://en.wikipedia.org/wiki/All_rights_reserved The default company to use for new files - + Výchozí společnost pro nové soubory @@ -2157,10 +2148,6 @@ Specify another directory, please. Black Černá - - Transparent - Průhledný - Image dimensions Rozměry obrázku @@ -2405,15 +2392,15 @@ Specify another directory, please. US customary (in/lb) - US customary (in/lb) + obvyklé v USA (in/lb) Number of decimals: - Number of decimals: + Počet desetinných míst: Imperial decimal (in/lb) - Imperial decimal (in/lb) + Imperiální desetinné (in/lb) @@ -2507,7 +2494,7 @@ Specify another directory, please. Gui::Dialog::DlgUnitsCalculator Unit mismatch - Unit mismatch + Jednotky si neodpovídají @@ -2557,50 +2544,50 @@ Specify another directory, please. %1 at %2 - %1 at %2 + %1 z %2 Gui::Dialog::DownloadItem Save File - Save File + Ulož soubor Download canceled: %1 - Download canceled: %1 + Stahovaní zrušeno: %1 Open containing folder - Open containing folder + Otevřít odpovídající složku Error opening save file: %1 - Error opening save file: %1 + Chyba při otevírání uloženého souboru: %1 Error saving: %1 - Error saving: %1 + Chyba při ukládání: %1 Network Error: %1 - Network Error: %1 + Chyba sítě: %1 seconds - seconds + vteřiny minutes - minutes + minuty - %4 %5 remaining - - %4 %5 remaining + - zbývá %4 %5 %1 of %2 (%3/sec) %4 - %1 of %2 (%3/sec) %4 + %1 z %2 (%3/sec) %4 ? @@ -2608,11 +2595,11 @@ Specify another directory, please. %1 of %2 - Stopped - %1 of %2 - Stopped + %1 z %2 - Zastaveno bytes - bytes + bajtů kB @@ -2627,57 +2614,53 @@ Specify another directory, please. Gui::Dialog::DownloadManager Downloads - Downloads + Stahování Clean up - Clean up + Vyčistit 0 Items - 0 Items + 0 položek Download Manager - Download Manager + Správce stahování 1 Download - 1 Download + 1 stahování %1 Downloads - %1 Downloads + %1 stahování Gui::Dialog::IconDialog - - Add icon - Přidat ikonu - Icon folders - + Složky ikon Add icon folder - + Přidat složku ikony Gui::Dialog::IconFolders Add or remove custom icon folders - + Přidat nebo odebrat obvyklé složky ikon Remove folder - + Odstranit složku Removing a folder only takes effect after an application restart. - + Odstranění složky se projeví až po restartu aplikace. @@ -2931,11 +2914,11 @@ Specify another directory, please. Incorrect quantity - + Nesprávné množství There are input fields with incorrect input, please ensure valid placement values! - + Vstupních pole obsahují nesprávná data, prosím vložte platné hodnoty umístění! @@ -3175,39 +3158,39 @@ Specify another directory, please. Search - + Hledat Searches object labels - + Vyhledávání popisků objektů Clears the search field - + Vymaže pole hledání Select only - + Vybrat pouze Selects only this object - + Vybere pouze tento objekt Deselect - + Zrušit výběr Deselects this object - + Zruší výběr tohoto objektu Zoom fit - + Přizpůsobit zvětšení Selects and fits this object in the 3D window - + Vybere a přizpůsobí tento objekt ve 3D okně Go to selection @@ -3215,7 +3198,7 @@ Specify another directory, please. Selects and locates this object in the tree view - + Vybere a vyhledá tento objekt ve stromovém zobrazení @@ -3430,7 +3413,7 @@ Chcete uložit provedené změny? Export graph - Export graph + Exportovat graf @@ -3441,7 +3424,7 @@ Chcete uložit provedené změny? Save value - Save value + Uložit hodnotu @@ -3467,7 +3450,7 @@ Chcete uložit provedené změny? Gui::LabelEditor List - + Seznam @@ -3547,13 +3530,12 @@ Chcete uložit provedené změny? Object dependencies - Object dependencies + Závislosti objektu The selected objects have a dependency to unselected objects. Do you want to copy them, too? - The selected objects have a dependency to unselected objects. -Do you want to copy them, too? + Vybrané objekty mají závislost na nevybrané objekty. Chcete je také zkopírovat? @@ -3644,7 +3626,7 @@ V pravém pohledu jsou %2 body vybrány. No point was found on model - No point was found on model + V modelu nebyly nalezeny žádné body @@ -3663,11 +3645,11 @@ V pravém pohledu jsou %2 body vybrány. Save value - Save value + Uložit hodnotu Clear list - + Smazat seznam @@ -3704,7 +3686,7 @@ V pravém pohledu jsou %2 body vybrány. Gui::PropertyEditor::LinkLabel Edit... - Edit... + Upravit... @@ -4010,7 +3992,7 @@ Do you want to specify another directory? Press CTRL and SHIFT buttons - Press CTRL and SHIFT buttons + Stisknout CTRL + SHIFT @@ -4089,11 +4071,11 @@ Do you want to specify another directory? NetworkAccessManager <qt>Enter username and password for "%1" at %2</qt> - <qt>Enter username and password for "%1" at %2</qt> + <qt>Vložte uživatelské jméno a heslo pro "%1" na %2</qt> <qt>Connect to proxy "%1" using:</qt> - <qt>Connect to proxy "%1" using:</qt> + <qt>Připojit se k proxy "%1" pomocí:</qt> @@ -4183,7 +4165,7 @@ Do you want to specify another directory? Input in line %1 is not a number - + Vstup na řádku %1 není číslo @@ -4424,10 +4406,6 @@ Do you want to continue? Unsaved document Neuložený dokument - - Save document before close? - Uložit dokument před zavřením? - Save Macro Uložit makro @@ -4585,11 +4563,11 @@ You either have to finish or cancel the editing in the task panel. Do you want to save your changes to document '%1' before closing? - + Přejete si uložit změny v dokumentu "%1" před zavřením? If you don't save, your changes will be lost. - + V případě neuložení dokumentu budou změny ztraceny. @@ -5039,11 +5017,11 @@ You either have to finish or cancel the editing in the task panel. Frequently Asked Questions on the FreeCAD website - Frequently Asked Questions on the FreeCAD website + FAQ na stránkách FreeCAD Frequently Asked Questions - Frequently Asked Questions + Často Kladené Otázky @@ -5062,7 +5040,7 @@ You either have to finish or cancel the editing in the task panel. The FreeCAD Forum - The FreeCAD Forum + FreeCAD Forum @@ -5073,15 +5051,15 @@ You either have to finish or cancel the editing in the task panel. Python scripting documentation - Python scripting documentation + Dokumentace o skriptování v Pythonu Python scripting documentation on the FreeCAD website - Python scripting documentation on the FreeCAD website + Dokumentace o skriptování v Pythonu na stránkách FreeCAD PowerUsers documentation - PowerUsers documentation + Dokumentace pokročilých uživatelů @@ -5092,11 +5070,11 @@ You either have to finish or cancel the editing in the task panel. Users documentation - Users documentation + Uživatelská dokumentace Documentation for users on the FreeCAD website - Documentation for users on the FreeCAD website + Dokumentace pro uživatele na stránkách FreeCAD @@ -5205,7 +5183,7 @@ You either have to finish or cancel the editing in the task panel. Step into - Step into + Vstoupit dovnitř @@ -5314,7 +5292,7 @@ You either have to finish or cancel the editing in the task panel. Unnamed - Unnamed + Nepojmenovaný @@ -5367,11 +5345,11 @@ You either have to finish or cancel the editing in the task panel. Cannot open file - + Soubor nelze otevřít Loading the file %1 is not supported - + Otevření souboru %1 není podporováno @@ -5888,11 +5866,11 @@ You either have to finish or cancel the editing in the task panel. &Units calculator... - &Units calculator... + Převodník jednotek... Start the units calculator - Start the units calculator + Spustit kalkulátor jednotek @@ -6126,21 +6104,13 @@ You either have to finish or cancel the editing in the task panel. Standard-View Standardní pohledy - - Stereo red/green - Stereo červená/zelená - - - Switch stereo viewing to red/green - Přepnout stereo zobrazení červená/zelená - Stereo red/cyan - + Stereo červená/azurová Switch stereo viewing to red/cyan - + Přepnout stereo zobrazení na červená/azurová @@ -6241,11 +6211,11 @@ You either have to finish or cancel the editing in the task panel. FreeCAD-VR - + FreeCAD-VR Extend the FreeCAD 3D Window to a Oculus Rift - + Rozšíření FReeCAD 3D okna na Oculus Rift @@ -6401,13 +6371,13 @@ You either have to finish or cancel the editing in the task panel. Std_Delete Object dependencies - Object dependencies + Závislosti objektu This object is referenced by other objects and thus these objects might get broken. Are you sure to continue? - This object is referenced by other objects and thus these objects might get broken. -Are you sure to continue? + Na tento objekt odkazují jiné objekty a proto mohou být tyto objekty poškozeny. +Opravdu chcete pokračovat? @@ -6430,19 +6400,19 @@ Are you sure to continue? Flat lines - Flat lines + Hrany Flat lines mode - Flat lines mode + Režim hran Shaded - Shaded + Stínované Shaded mode - Shaded mode + Režim stínování Points @@ -6450,20 +6420,19 @@ Are you sure to continue? Points mode - Points mode + Režim bodů Std_DuplicateSelection Object dependencies - Object dependencies + Závislosti objektu The selected objects have a dependency to unselected objects. Do you want to duplicate them, too? - The selected objects have a dependency to unselected objects. -Do you want to duplicate them, too? + Vybrané objekty mají závislost na nevybrané objekty. Chcete je také duplikovat? @@ -6522,7 +6491,7 @@ Do you want to specify its installation path if it's already installed? &View - & Pohled + &Zobrazit &Tools diff --git a/src/Gui/Language/FreeCAD_de.qm b/src/Gui/Language/FreeCAD_de.qm index 42d11a6df9..5f5fe3e474 100644 Binary files a/src/Gui/Language/FreeCAD_de.qm and b/src/Gui/Language/FreeCAD_de.qm differ diff --git a/src/Gui/Language/FreeCAD_de.ts b/src/Gui/Language/FreeCAD_de.ts index eeaa2d380d..96bfb514fb 100644 --- a/src/Gui/Language/FreeCAD_de.ts +++ b/src/Gui/Language/FreeCAD_de.ts @@ -1,139 +1,139 @@ - + Angle Form - Form + Form A: - A: + A: B: - B: + B: C: - C: + C: Angle Snap - Einrastwinkel + Einrastwinkel 1 ° - 1 ° + 1 ° 2 ° - 2 ° + 2 ° 5 ° - 5 ° + 5 ° 10 ° - 10 ° + 10 ° 20 ° - 20 ° + 20 ° 45 ° - 45 ° + 45 ° 90 ° - 90 ° + 90 ° 180 ° - 180 ° + 180 ° CmdViewMeasureClearAll Measure - + Messen Clear measurement - + Messung löschen CmdViewMeasureToggleAll Measure - + Messen Toggle measurement - + Messen ein-/ausschalten DlgCustomizeSpNavSettings Spaceball Motion - Spaceball-Bewegung + Spaceball-Bewegung Global Sensitivity: - Globale Empfindlichkeit: + Globale Empfindlichkeit: Dominant Mode - Dominanter Modus + Dominanter Modus Flip Y/Z - Y/Z tauschen + Y/Z tauschen Enable Translations - Translationen aktivieren + Translationen aktivieren Enable Rotations - Rotationen aktivieren + Rotationen aktivieren Calibrate - Kalibrieren + Kalibrieren Default - Standard + Standard Enable - Aktivieren + Aktivieren Reverse - Umkehren + Umkehren DlgUnitCalculator Units calculator - + Einheitenrechner as: - + als: => - + => Help @@ -156,147 +156,139 @@ Ico - + Ico Filename - + Dateiname Gui::AccelLineEdit none - kein + kein Gui::ActionSelector Available: - Verfügbar: + Verfügbar: Selected: - Ausgewählt: + Ausgewählt: Add - Hinzufügen + Hinzufügen Remove - Entfernen + Entfernen Move up - Noch oben verschieben + Noch oben verschieben Move down - Nache unten verschieben + Nache unten verschieben Gui::AlignmentView Movable object - Bewegliches Objekt + Bewegliches Objekt Fixed object - Festes Objekt + Festes Objekt Gui::BlenderNavigationStyle Press left mouse button - Drücken Sie die linke Maustaste + Drücken Sie die linke Maustaste Press SHIFT and middle mouse button - Drücke die Umschalttaste und die mittlere Maustaste + Drücke die Umschalttaste und die mittlere Maustaste Press middle mouse button - Drücken Sie die mittlere Maustaste + Drücken Sie die mittlere Maustaste Scroll middle mouse button - Scrollen Sie die mittlere Maustaste + Scrollen Sie die mittlere Maustaste Gui::CADNavigationStyle Press left mouse button - Drücken Sie die linke Maustaste + Drücken Sie die linke Maustaste Press middle mouse button - Drücken Sie die mittlere Maustaste - - - Press left and middle mouse button - Drücken Sie die linke und die mittlere Maustaste - - - Scroll middle mouse button - Scrollen Sie die mittlere Maustaste + Drücken Sie die mittlere Maustaste Press middle and left or right mouse button - + Mittlere und linke oder rechte Maustaste drücken Scroll middle mouse button or keep middle button pressed while doing a left or right click and move the mouse up or down - + Rollen mit mittlerem Mausrad, oder mittlere Taste während Links- oder Rechtsklick gedrückt halten und Maus auf oder ab bewegen Gui::Command Standard - Standard + Standard Gui::ContainerDialog &OK - &OK + &OK &Cancel - A&bbrechen + A&bbrechen Gui::ControlSingleton Task panel - Taskleiste + Taskleiste Gui::Dialog::AboutApplication About - Über + Über Revision number - Revisionsnummer + Revisionsnummer Version - Version + Version OK - OK + OK @@ -304,69 +296,65 @@ while doing a left or right click and move the mouse up or down Release date - Erscheinungsdatum - - - Platform - Plattform + Erscheinungsdatum License... - Lizenz... + Lizenz... Copy to clipboard - In Zwischenablage kopieren + In Zwischenablage kopieren Operating system - Betriebssystem + Betriebssystem Word size - + Wortgröße Gui::Dialog::ButtonModel Button %1 - Schaltfläche %1 + Schaltfläche %1 Out Of Range - Außerhalb des Bereichs + Außerhalb des Bereichs Gui::Dialog::Clipping Clipping - + Abschneiden Clipping X - + Abschneiden in X Flip - + Umdrehen Offset - + Versetzen Clipping Y - + Abschneiden in Y Clipping Z - + Abschneiden in Z Clipping custom direction - + Abschneiden in benutzerdefinierter Richtung View @@ -374,92 +362,84 @@ while doing a left or right click and move the mouse up or down Adjust to view direction - + An Blickrichtung anpassen Direction - + Richtung Gui::Dialog::CommandModel Commands - Befehle + Befehle Gui::Dialog::DemoMode View Turntable - Drehteller + Drehteller Speed - Geschwindigkeit + Geschwindigkeit Maximum - Maximum + Maximum Minimum - Minimum + Minimum Fullscreen - Vollbild + Vollbild Enable timer - Timer aktivieren + Timer aktivieren s - s + s Angle - Winkel + Winkel 90° - 90° + 90° -90° - -90 ° + -90 ° Play - Wiedergabe + Wiedergabe Stop - Beenden + Beenden Close - Schließen + Schließen Gui::Dialog::DlgActivateWindow Choose Window - Fenster auswählen + Fenster auswählen &Activate - &Aktivieren - - - Alt+A - Alt+B - - - &Cancel - A&bbrechen + &Aktivieren @@ -470,30 +450,18 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::DlgActivateWindowImp Windows - Fenster + Fenster Gui::Dialog::DlgAuthorization Authorization - Autorisiertung - - - &OK - &OK - - - &Cancel - A&bbrechen + Autorisiertung Password: - Kennwort: - - - User name: - Benutzerame: + Kennwort: @@ -501,151 +469,139 @@ while doing a left or right click and move the mouse up or down Username: - + Benutzername: Site: - + Seite: %1 at %2 - + %1 bei %2 Gui::Dialog::DlgChooseIcon Choose Icon - Symbol auswählen - - - OK - OK - - - Cancel - Abbrechen - - - Add icons... - Symbole hinzufügen... + Symbol auswählen Icon folders... - + Icon Order... Gui::Dialog::DlgCustomActions Macros - Makros + Makros Setup Custom Macros - Erstellen benutzerdefinierter Makros + Erstellen benutzerdefinierter Makros Macro: - Makro: + Makro: ... - ... + ... Pixmap - Symbol + Symbol Accelerator: - Tastenbelegung: + Tastenbelegung: What's this: - Direkthilfe: + Direkthilfe: Status text: - Statustext: + Statustext: Tool tip: - Tooltipp: + Tooltipp: Menu text: - Menütext: + Menütext: Add - Hinzufügen + Hinzufügen Remove - Entfernen + Entfernen Replace - Ersetzen + Ersetzen Gui::Dialog::DlgCustomActionsImp Icons - Symbole + Symbole Macros - Makros + Makros No macro - Kein Makro + Kein Makro No macros found. - Keine Makros gefunden. + Keine Makros gefunden. Macro not found - Makro nicht gefunden + Makro nicht gefunden Sorry, couldn't find macro file '%1'. - Das Makro '%1' konnte nicht gefunden werden. + Das Makro '%1' konnte nicht gefunden werden. Empty macro - Leeres Makrofeld + Leeres Makrofeld Please specify the macro first. - Wählen Sie bitte vorher das Makro aus. + Wählen Sie bitte vorher das Makro aus. Empty text - Leeres Textfeld + Leeres Textfeld Please specify the menu text first. - Geben Sie bitte den Menütext an. + Geben Sie bitte den Menütext an. No item selected - Kein Element ausgewählt + Kein Element ausgewählt Please select a macro item first. - Wählen Sie bitte vorher ein Makroelement aus. + Wählen Sie bitte vorher ein Makroelement aus. Gui::Dialog::DlgCustomCommands Commands - Befehle + Befehle @@ -656,70 +612,70 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::DlgCustomCommandsImp Category - Kategorie + Kategorie Icon - Symbol + Symbol Command - Befehl + Befehl Gui::Dialog::DlgCustomKeyboard Keyboard - Tastatur + Tastatur Description: - Beschreibung: + Beschreibung: &Category: - &Kategorie: + &Kategorie: C&ommands: - Be&fehle: + Be&fehle: Current shortcut: - Aktuell verwendete Tastenkombination: + Aktuell verwendete Tastenkombination: Press &new shortcut: - &Neue Tastenkombination drücken: + &Neue Tastenkombination drücken: Currently assigned to: - Im Moment verwendet von: + Im Moment verwendet von: &Assign - Zu&weisen + Zu&weisen Alt+A - Alt+B + Alt+B &Reset - Zu&rücksetzen + Zu&rücksetzen Alt+R - Alt+R + Alt+R Re&set All - &Alles zurücksetzen + &Alles zurücksetzen Alt+S - Alt+S + Alt+S @@ -730,33 +686,33 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::DlgCustomKeyboardImp Icon - Symbol + Symbol Command - Befehl + Befehl none - kein + kein Multiple defined shortcut - Mehrfach belegte Tastenkombination + Mehrfach belegte Tastenkombination The shortcut '%1' is defined more than once. This could result into unexpected behaviour. - Die Tastenkombination '%1' ist mehr als einmal vergeben. Dies kann zu unerwartetem Verhalten führen. + Die Tastenkombination '%1' ist mehr als einmal vergeben. Dies kann zu unerwartetem Verhalten führen. Already defined shortcut - Bereits belegte Tastenkombination + Bereits belegte Tastenkombination The shortcut '%1' is already assigned to '%2'. Please define another shortcut. - Die Tastenkombination '%1' wird bereits von '%2' verwendet. + Die Tastenkombination '%1' wird bereits von '%2' verwendet. Wählen Sie bitte eine andere Tastenkombination. @@ -764,94 +720,94 @@ Wählen Sie bitte eine andere Tastenkombination. Gui::Dialog::DlgCustomToolBoxbarsImp Toolbox bars - Werkzeugleisten + Werkzeugleisten Gui::Dialog::DlgCustomToolbars Toolbars - Symbolleisten + Symbolleisten <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Bemerkung:</span> Die Änderungen werden beim nächsten Laden des Arbeitsbereiches wirksam</p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Bemerkung:</span> Die Änderungen werden beim nächsten Laden des Arbeitsbereiches wirksam</p></body></html> Move right - Nach rechts verschieben + Nach rechts verschieben <b>Move the selected item one level down.</b><p>This will also change the level of the parent item.</p> - <b>Ausgewähltes Element um eine Stufe nach unten verschieben.</b><p>Das verändert auch die Stufe des Vaterelements.</p> + <b>Ausgewähltes Element um eine Stufe nach unten verschieben.</b><p>Das verändert auch die Stufe des Vaterelements.</p> Move left - Nach links verschieben + Nach links verschieben <b>Move the selected item one level up.</b><p>This will also change the level of the parent item.</p> - <b>Ausgewähltes Element um eine Stufe nach oben verschieben.</b><p>Das verändert auch die Stufe des Vaterelements.</p> + <b>Ausgewähltes Element um eine Stufe nach oben verschieben.</b><p>Das verändert auch die Stufe des Vaterelements.</p> Move down - Nache unten verschieben + Nache unten verschieben <b>Move the selected item down.</b><p>The item will be moved within the hierarchy level.</p> - <b>Ausgewähltes Element nach unten verschieben.</b><p>Das Element wird innerhalb der Hierarchiestufe verschoben.</p> + <b>Ausgewähltes Element nach unten verschieben.</b><p>Das Element wird innerhalb der Hierarchiestufe verschoben.</p> Move up - Noch oben verschieben + Noch oben verschieben <b>Move the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - <b>Ausgewähltes Element nach oben verschieben.</b><p>Das Element wird innerhalb der Hierarchiestufe verschoben.</p> + <b>Ausgewähltes Element nach oben verschieben.</b><p>Das Element wird innerhalb der Hierarchiestufe verschoben.</p> New... - Neu... + Neu... Rename... - Umbenennen... + Umbenennen... Delete - Löschen + Löschen Icon - Symbol + Symbol Command - Befehl + Befehl <Separator> - <Trennlinie> + <Trennlinie> New toolbar - Neue Symbolleiste + Neue Symbolleiste Toolbar name: - Name der Symbolleiste: + Name der Symbolleiste: Duplicated name - Doppelter Namen + Doppelter Namen The toolbar name '%1' is already used - Der Name der Symbolleiste '%1' wird bereits verwendet + Der Name der Symbolleiste '%1' wird bereits verwendet Rename toolbar - Symbolleiste umbenennen + Symbolleiste umbenennen @@ -866,92 +822,88 @@ Wählen Sie bitte eine andere Tastenkombination. Gui::Dialog::DlgCustomizeImp Customize - Benutzerdefiniert + Benutzerdefiniert &Help - &Hilfe + &Hilfe &Close - S&chließen + S&chließen Gui::Dialog::DlgCustomizeSpNavSettings Spaceball Motion - Spaceball-Bewegung + Spaceball-Bewegung No Spaceball Present - Kein Spaceball gefunden + Kein Spaceball gefunden Gui::Dialog::DlgCustomizeSpaceball No Spaceball Present - Kein Spaceball gefunden + Kein Spaceball gefunden Buttons - Schaltflächen + Schaltflächen Clear - Löschen + Löschen Print Reference - Referenz anzeigen + Referenz anzeigen Spaceball Buttons - Spaceball-Knöpfe + Spaceball-Knöpfe Gui::Dialog::DlgDisplayProperties Display properties - Anzeigeeigenschaften + Anzeigeeigenschaften Display - Anzeige + Anzeige Transparency: - Transparenz: + Transparenz: Line width: - Linienstärke: + Linienstärke: Point size: - Punktgröße: + Punktgröße: Material - Material + Material ... - ... - - - Close - Schließen + ... Viewing mode - Anzeigemodus + Anzeigemodus Plot mode: - Plotmodus: + Plotmodus: @@ -959,23 +911,23 @@ Wählen Sie bitte eine andere Tastenkombination. Line transparency: - Linientransparenz: + Linientransparenz: Line color: - Linienfarbe: + Linienfarbe: Shape color: - Flächenfarbe: + Flächenfarbe: Color plot: - Farb-Plot: + Farb-Plot: Document window: - Dokumentfenster: + Dokumentfenster: @@ -986,142 +938,142 @@ Wählen Sie bitte eine andere Tastenkombination. Aluminium - + Aluminium Brass - + Messing Bronze - + Bronze Copper - + Kupfer Chrome - + Chrom Emerald - + Smaragd Gold - + Gold Jade - + Jade Metalized - + Metallisiert Neon GNC - + Neon GNC Neon PHC - + Neon PHC Obsidian - + Obsidian Pewter - + Zinn Plaster - + Putz Plastic - + Kunststoff Ruby - + Rubin Satin - + Satin Shiny plastic - + Glänzender Kunststoff Silver - + Silber Steel - + Stahl Stone - + Stein Gui::Dialog::DlgEditorSettings Editor - Editor + Editor Options - Optionen + Optionen Enable line numbers - Zeilennummerierung + Zeilennummerierung Enable folding - Faltung zulassen + Faltung zulassen Indentation - Einrückung + Einrückung Insert spaces - Leerzeichen-Einrückung beibehalten + Leerzeichen-Einrückung beibehalten Tab size: - Tabulator-Breite: + Tabulator-Breite: Indent size: - Einrückungsbreite: + Einrückungsbreite: Keep tabs - Tanulator-Einrückung beibehalten + Tanulator-Einrückung beibehalten Display Items - Elemente + Elemente Family: - Familie: + Familie: Size: - Größe: + Größe: Preview: - Vorschau: + Vorschau: @@ -1132,93 +1084,85 @@ Wählen Sie bitte eine andere Tastenkombination. Gui::Dialog::DlgGeneral General - Allgemein + Allgemein Start up - Start + Start Enable splash screen at start up - Splashscreen beim Starten anzeigen + Splashscreen beim Starten anzeigen Switch to tab of report window: - Wechsle zu Reiter des Ausgabefensters: + Wechsle zu Reiter des Ausgabefensters: Auto load module after start up: - Lade Modul automatisch nach Startvorgang: + Lade Modul automatisch nach Startvorgang: Language - Sprache + Sprache Change language: - Sprache auswählen: + Sprache auswählen: Main window - Hauptfenster + Hauptfenster Size of recent file list - Anzahl der zuletzt benutzten Dateien + Anzahl der zuletzt benutzten Dateien Window style: - Fenster-Stil: + Fenster-Stil: Size of toolbar icons: - Bildgröße in Symbolleisten: + Bildgröße in Symbolleisten: Enable tiled background - + Gekachelten Hintergrund aktivieren Style sheet: - + Formatvorlage: Gui::Dialog::DlgGeneralImp Default (%1 x %1) - Standard (%1 x %1) + Standard (%1 x %1) Small (%1 x %1) - Klein (%1 x %1) + Klein (%1 x %1) Large (%1 x %1) - Groß (%1 x %1) + Groß (%1 x %1) Extra large (%1 x %1) - Extra groß (%1 x %1) + Extra groß (%1 x %1) No style sheet - + Keine Formatvorlage Gui::Dialog::DlgInputDialog Input - Eingabe - - - OK - OK - - - Cancel - Abbrechen + Eingabe @@ -1229,184 +1173,176 @@ Wählen Sie bitte eine andere Tastenkombination. Gui::Dialog::DlgInspector Scene Inspector - Scene Inspector + Scene Inspector Gui::Dialog::DlgMacroExecute Execute macro - Makro ausführen + Makro ausführen Macro name: - Makroname: + Makroname: Macro destination: - Makro-Zielpfad: + Makro-Zielpfad: Execute - Ausführen + Ausführen Close - Schließen + Schließen Create - Erstellen + Erstellen Delete - Löschen + Löschen Edit - Bearbeiten + Bearbeiten Gui::Dialog::DlgMacroExecuteImp Macros - Makros + Makros Macro file - Makro-Datei + Makro-Datei Enter a file name, please: - Geben Sie bitte einen Dateinamen an: + Geben Sie bitte einen Dateinamen an: Existing file - Vorhandene Datei + Vorhandene Datei '%1'. This file already exists. - '%1'.\n + '%1'.\n Diese Datei ist bereits vorhanden. Delete macro - Makro löschen + Makro löschen Do you really want to delete the macro '%1'? - Möchten Sie das Makro '%1' wirklich löschen? + Möchten Sie das Makro '%1' wirklich löschen? Cannot create file - Datei kann nicht erstellt werden + Datei kann nicht erstellt werden Creation of file '%1' failed. - Erstellen der Datei %1' fehlgeschlagen. + Erstellen der Datei %1' fehlgeschlagen. Gui::Dialog::DlgMacroRecord Macro recording - Makroaufzeichnung + Makroaufzeichnung Macro name: - Makroname: + Makroname: Stop - Beenden + Beenden Cancel - Abbrechen + Abbrechen Macro path: - Makro-Zielpfad: + Makro-Zielpfad: ... - ... + ... Record - Aufzeichnen + Aufzeichnen Gui::Dialog::DlgMacroRecordImp Macro recorder - Makroaufzeichnung + Makroaufzeichnung Specify first a place to save. - Geben Sie vorher einen Speicherort an. + Geben Sie vorher einen Speicherort an. Existing macro - Bestehendes Makro + Bestehendes Makro The macro '%1' already exists. Do you want to overwrite? - Das Makro '%1' existiert bereits. Wollen Sie es überschreiben? + Das Makro '%1' existiert bereits. Wollen Sie es überschreiben? The macro directory doesn't exist. Please, choose another one. - Das Makro-Verzeichnis existiert nicht. Wählen Sie bitte ein anderes aus. + Das Makro-Verzeichnis existiert nicht. Wählen Sie bitte ein anderes aus. Choose macro directory - Wählen Sie ein Makro-Verzeichnis + Wählen Sie ein Makro-Verzeichnis You have no write permission for the directory. Please, choose another one. - + Sie haben keine Schreibrechte für das Verzeichnis. Bitte wählen Sie ein anderes. Gui::Dialog::DlgMaterialProperties Material properties - Materialeigenschaften - - - &Close - S&chließen - - - Alt+C - Alt+I + Materialeigenschaften Material - Material + Material Diffuse color: - Streufarbe: + Streufarbe: Specular color: - Glanzfarbe: + Glanzfarbe: Shininess: - Glanz: + Glanz: % - % + % Ambient color: - Umgebungsfarbe: + Umgebungsfarbe: @@ -1414,39 +1350,39 @@ Diese Datei ist bereits vorhanden. Emissive color: - Ausstrahlfarbe: + Ausstrahlfarbe: Gui::Dialog::DlgOnlineHelp On-line help - Online-Hilfe + Online-Hilfe Help viewer - Hilfe + Hilfe Location of start page - Ort der Startseite + Ort der Startseite Gui::Dialog::DlgOnlineHelpImp HTML files (*.html *.htm) - HTML-Dateien (*.html *.htm) + HTML-Dateien (*.html *.htm) Access denied - Zugriff verweigert + Zugriff verweigert Access denied to '%1' Specify another directory, please. - Zugriff auf '%1' verweigert + Zugriff auf '%1' verweigert Wählen Sie bitte ein anderes Verzeichnis aus. @@ -1455,85 +1391,61 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Gui::Dialog::DlgParameter Parameter Editor - Parametereditor + Parametereditor Save to disk - Speichern + Speichern Alt+C - Alt+I + Alt+I &Close - S&chließen + S&chließen Gui::Dialog::DlgParameterImp Group - Gruppe + Gruppe Name - Name + Name Type - Typ + Typ Value - Wert + Wert User parameter - Benutzerdefinierte Parameter + Benutzerdefinierte Parameter Invalid input - Ungültige Eingabe + Ungültige Eingabe Invalid key name '%1' - Ungültiger Schlüsselname '%1' + Ungültiger Schlüsselname '%1' System parameter - Systemparameter + Systemparameter Gui::Dialog::DlgPreferences Preferences - Einstellungen - - - &Help - &Hilfe - - - Alt+H - Alt+H - - - &OK - &OK - - - &Apply - Ü&bernehmen - - - Alt+A - Alt+B - - - &Cancel - A&bbrechen + Einstellungen @@ -1544,58 +1456,50 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Gui::Dialog::DlgPreferencesImp Wrong parameter - Falscher Parameter + Falscher Parameter Gui::Dialog::DlgProjectInformation Project information - Projektinformationen + Projektinformationen Information - Information + Information &Name: - &Name: + &Name: Commen&t: - Kommen&tar: + Kommen&tar: Path: - Pfad: + Pfad: &Last modified by: - Zuletzt &geändert von: + Zuletzt &geändert von: Created &by: - Erstellt &von: + Erstellt &von: Com&pany: - &Firma: + &Firma: Last &modification date: - Zuletzt geändert a&m: + Zuletzt geändert a&m: Creation &date: - Erstell&datum: - - - &OK - &OK - - - &Cancel - A&bbrechen + Erstell&datum: @@ -1603,89 +1507,89 @@ Wählen Sie bitte ein anderes Verzeichnis aus. UUID: - + UUID: License information: - + Lizenzinformationen: License URL - + Lizenz-URL Open in browser - + Im Browser öffnen Gui::Dialog::DlgProjectUtility Project utility - Projekt-Hilfsprogramm + Projekt-Hilfsprogramm Extract project - Projekt entpacken + Projekt entpacken Source - Quelle + Quelle Project file (*.fcstd) - Projektdatei (*.fcstd) + Projektdatei (*.fcstd) Destination - Zielort + Zielort Extract - Entpacken + Entpacken Create project - Projekt erstellen + Projekt erstellen Document.xml - Document.xml + Document.xml Create - Erstellen + Erstellen Load project file after creation - Projektdatei nach Erstellen laden + Projektdatei nach Erstellen laden Empty source - Leerer Quellpfad + Leerer Quellpfad No source is defined. - Kein Quellpafd angegeben. + Kein Quellpafd angegeben. Empty destination - Leerer Zeilpfad + Leerer Zeilpfad No destination is defined. - Kein Zielpfad angegeben. + Kein Zielpfad angegeben. Gui::Dialog::DlgPropertyLink Link - + Link Show all object types - + Zeige alle Objekttypen No selection @@ -1693,50 +1597,50 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Please select an object from the list - + Bitte wählen Sie ein Objekt aus der Liste Gui::Dialog::DlgReportView Output window - Ausgabefenster + Ausgabefenster Output - Ausgabe + Ausgabe Record log messages - Protokoll-Meldungen ausgeben + Protokoll-Meldungen ausgeben Record warnings - Warnungen ausgeben + Warnungen ausgeben Record error messages - Fehlermeldungen ausgeben + Fehlermeldungen ausgeben Colors - Farben + Farben Normal messages: - Normale Meldungen: + Normale Meldungen: Log messages: - Protokoll-Meldungen: + Protokoll-Meldungen: Warnings: - Warnungen: + Warnungen: Errors: - Fehlermeldungen: + Fehlermeldungen: @@ -1744,93 +1648,89 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Redirect internal Python errors to report view - Interne Python-Fehlermeldungen auf Ausgabefenster umleiten + Interne Python-Fehlermeldungen auf Ausgabefenster umleiten Redirect internal Python output to report view - Interne Python-Meldungen auf Ausgabefenster umleiten + Interne Python-Meldungen auf Ausgabefenster umleiten Gui::Dialog::DlgRunExternal Running external program - Externes Programm ausführen + Externes Programm ausführen TextLabel - TextLabel + TextLabel Advanced >> - Erweitert >> + Erweitert >> ... - ... + ... Accept changes - Änderungen übernehmen + Änderungen übernehmen Discard changes - Änderungen verwerfen + Änderungen verwerfen Abort program - Programm abbrechen + Programm abbrechen Help - Hilfe + Hilfe Select a file - Wählen Sie eine Datei aus + Wählen Sie eine Datei aus Gui::Dialog::DlgSettings3DView 3D View - 3D-Viewer + 3D-Viewer 3D View settings - Einstellungen 3D-Viewer + Einstellungen 3D-Viewer Show coordinate system in the corner - Koordinatensystem in Ecke anzeigen + Koordinatensystem in Ecke anzeigen Show counter of frames per second - Anzeigen der Datenrate pro Sekunde + Anzeigen der Datenrate pro Sekunde Enable animation - Animation zulassen - - - Enable anti-aliasing (slower) - Anti-Aliasing aktivieren (langsam) + Animation zulassen Eye to eye distance for stereo modes: - Augabstand für Stereomodus: + Augabstand für Stereomodus: Camera type - Kameratyp + Kameratyp Orthographic rendering - Orthographische Darstellung + Orthographische Darstellung Perspective rendering - Perspektivische Darstellung + Perspektivische Darstellung @@ -1838,169 +1738,161 @@ Wählen Sie bitte ein anderes Verzeichnis aus. 3D Navigation - 3D-Navigation + 3D-Navigation Mouse... - Maus... + Maus... Intensity of backlight - Intensität der Hintergrundbeleuchtung + Intensität der Hintergrundbeleuchtung Enable backlight color - Aktiviere farbige Hintergrundbeleuchtung + Aktiviere farbige Hintergrundbeleuchtung Orbit style - Orbit Stil + Orbit Stil Turntable - Drehscheibe + Drehscheibe Trackball - Trackball + Trackball Invert zoom - Zoom umkehren + Zoom umkehren Zoom at cursor - Zoom an Cursorposition + Zoom an Cursorposition Zoom step - Zoom-Schritt + Zoom-Schritt Anti-Aliasing - + Kantenglättung None - + Kein Line Smoothing - + Linie glätten MSAA 2x - + MSAA 2x MSAA 4x - + MSAA 4x MSAA 8x - + MSAA 8x Gui::Dialog::DlgSettings3DViewImp %1 navigation - %1 Navigation + %1 Navigation Gui::Dialog::DlgSettingsColorGradient Color model - Farbmodell + Farbmodell &Gradient: - &Verlauf: + &Verlauf: red-yellow-green-cyan-blue - Rot-Gelb-Grün-Türkis-Blau + Rot-Gelb-Grün-Türkis-Blau blue-cyan-green-yellow-red - Blau-Türkis-Grün-Gelb-Rot + Blau-Türkis-Grün-Gelb-Rot white-black - Weiß-Schwarz + Weiß-Schwarz black-white - Schwarz-Weiß + Schwarz-Weiß Visibility - Sichtbarkeit + Sichtbarkeit Out g&rayed - Außerhalb geg&raut + Außerhalb geg&raut Alt+R - Alt+R + Alt+R Out &invisible - Außerhalb uns&ichtbar + Außerhalb uns&ichtbar Alt+I - Alt+I + Alt+I Style - Stil + Stil &Zero - N&ull-basiert + N&ull-basiert Alt+Z - Alt+U + Alt+U &Flow - &Fließend + &Fließend Alt+F - Alt+F - - - &OK - &OK - - - &Cancel - A&bbrechen + Alt+F Parameter range - Parameterbereich + Parameterbereich Mi&nimum: - Mi&nimum: + Mi&nimum: Ma&ximum: - Ma&ximum: + Ma&ximum: &Labels: - &Beschriftungen: + &Beschriftungen: &Decimals: - Nach&kommastellen: + Nach&kommastellen: @@ -2008,653 +1900,581 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Color-gradient settings - Farbverlauf-Einstellungen + Farbverlauf-Einstellungen Gui::Dialog::DlgSettingsColorGradientImp Wrong parameter - Falscher Parameter + Falscher Parameter The maximum value must be higher than the minimum value. - Der Maximalwert muss größer als der Minimalwert sein. + Der Maximalwert muss größer als der Minimalwert sein. Gui::Dialog::DlgSettingsDocument Document - Dokument + Dokument General - Allgemein + Allgemein Document save compression level (0 = none, 9 = highest, 3 = default) - Kompressionsstufe beim Speichern des Dokuments + Kompressionsstufe beim Speichern des Dokuments (0 = keine, 9 = höchste, 3 = standardmäßige Kompression) Create new document at start up - Neues Dokument beim Start erzeugen + Neues Dokument beim Start erzeugen Storage - Speichern + Speichern Saving transactions (Auto-save) - Transaktionen speichern (Automatisches Speichern) + Transaktionen speichern (Automatisches Speichern) Discard saved transaction after saving document - Transaktionen nach Speichern von Dokument verwerfen + Transaktionen nach Speichern von Dokument verwerfen Save thumbnail into project file when saving document - Beim Speichern des Dokumentes Miniaturansicht in Projektdatei speichrn + Beim Speichern des Dokumentes Miniaturansicht in Projektdatei speichrn Create up to backup files when resaving document - Beim Speichern des Dokuments erstelle Backup-Dateien von bis zu + Beim Speichern des Dokuments erstelle Backup-Dateien von bis zu Document objects - Dokumentobjekte + Dokumentobjekte Allow duplicate object labels in one document - Doppelte Objektbezeichnungen in einem Dokument zulassen + Doppelte Objektbezeichnungen in einem Dokument zulassen Maximum Undo/Redo steps - Maximale Rückgängigmachen/Wiederholen-Schritte + Maximale Rückgängigmachen/Wiederholen-Schritte Using Undo/Redo on documents - Rückgängigmachen/Wiederholen in Dokumenten verwenden + Rückgängigmachen/Wiederholen in Dokumenten verwenden Authoring and License - + Autorenschaft und Lizenz Author name - + Name des Autors <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> - + <html><head/> <body><p>Der Name welcher zur Dokumenterstellung verwendet wird</p><p>Leer lassen, für anonym.</p><p>Sie können auch folgende Form verwenden:</p><p>John Doe &lt; john@doe.com &gt;</p></body></html> If this is checked, the "Last modified by" field will be set when saving the file - + Wenn diese Option aktiviert ist, wird beim Speichern der Datei das "Zuletzt verändert durch" Feld gesetzt Set on save - + Beim Speichern setzen Company - + Firma Default license - + Standard Lizenz The default license for new documents - + Die Standard Lizenz für neue Dokumente All rights reserved - + Alle Rechte vorbehalten CreativeCommons Attribution - + CreativeCommons Namensnennung CreativeCommons Attribution-ShareAlike - + CreativeCommons Namensnennung-Weitergabe unter gleichen Bedingungen CreativeCommons Attribution-NoDerivatives - + CreativeCommons Namensnennung-KeineBearbeitung CreativeCommons Attribution-NonCommercial - + CreativeCommons Namensnennung-NichtKommerziell CreativeCommons Attribution-NonCommercial-ShareAlike - + CreativeCommons Namensnennung-NichtKommerziell-Weitergabe unter gleichen Bedingungen CreativeCommons Attribution-NonCommercial-NoDerivatives - + CreativeCommons Namensnennung-NichtKommerziell-KeineBearbeitung Public Domain - + Public Domain FreeArt - + FreeArt Other - + Andere License URL - + Lizenz-URL An URL where the user can find more details about the license - + Eine URL, unter der der Benutzer weitere Informationen über die Lizenz finden kann http://en.wikipedia.org/wiki/All_rights_reserved - + http://de.wikipedia.org/wiki/Alle_Rechte_vorbehalten The default company to use for new files - + Der voreingestellte Firmenname für neue Datein Gui::Dialog::DlgSettingsEditorImp Text - Text + Text Bookmark - Lesezeichen + Lesezeichen Breakpoint - Haltepunkt + Haltepunkt Keyword - Schlüsselwort + Schlüsselwort Comment - Kommentieren + Kommentieren Block comment - Blockkommentar + Blockkommentar Number - Ziffer + Ziffer String - Zeichenkette + Zeichenkette Character - Zeichen + Zeichen Class name - Klassenname + Klassenname Define name - Define-Name + Define-Name Operator - Operator + Operator Python output - Pythonausgabe + Pythonausgabe Python error - Pythonfehler + Pythonfehler Items - Elemente + Elemente Current line highlight - Aktuelle Zeile hervorheben + Aktuelle Zeile hervorheben Gui::Dialog::DlgSettingsImage Image settings - Bildparameter + Bildparameter Image properties - Bildeigenschaften + Bildeigenschaften Back&ground: - Hinter&grund: + Hinter&grund: Current - Aktuell + Aktuell White - Weiß + Weiß Black - Schwarz - - - Transparent - Transparent + Schwarz Image dimensions - Bildabmessungen + Bildabmessungen Pixel - Pixel + Pixel &Width: - &Breite: + &Breite: Current screen - Aktueller Bildschirm + Aktueller Bildschirm Icon 32 x 32 - Symbol 32 x 32 + Symbol 32 x 32 Icon 64 x 64 - Symbol 64 x 64 + Symbol 64 x 64 Icon 128 x 128 - Symbol 128 x 128 + Symbol 128 x 128 CGA 320 x 200 - CGA 320 x 320 + CGA 320 x 320 QVGA 320 x 240 - QVGA 320 x 240 + QVGA 320 x 240 VGA 640 x 480 - VGA 640 x 480 + VGA 640 x 480 NTSC 720 x 480 - NISC 720 x 480 + NISC 720 x 480 PAL 768 x 578 - PAL 768 x 578 + PAL 768 x 578 SVGA 800 x 600 - SVGA 800 x 600 + SVGA 800 x 600 XGA 1024 x 768 - XGA 1024 x 768 + XGA 1024 x 768 HD720 1280 x 720 - HD720 1280 x 720 + HD720 1280 x 720 SXGA 1280 x 1024 - SXGA 1280 x 1024 + SXGA 1280 x 1024 SXGA+ 1400 x 1050 - SXGA+ 1400 x 1050 + SXGA+ 1400 x 1050 UXGA 1600 x 1200 - UXGA 1600 x 1200 + UXGA 1600 x 1200 HD1080 1920 x 1080 - HD1080 1920 x 1080 + HD1080 1920 x 1080 WUXGA 1920 x 1200 - WUXGA 1920 x 1200 + WUXGA 1920 x 1200 QXGA 2048 x 1538 - QXGA 2048 x 1538 + QXGA 2048 x 1538 WQXGA 2560 x 1600 - WQXGA 2560 x 1600 + WQXGA 2560 x 1600 QSXGA 2560 x 2048 - QSXGA 2560 x 2024 + QSXGA 2560 x 2024 QUXGA 3200 × 2400 - QUXGA 3200 x 2400 + QUXGA 3200 x 2400 HUXGA 6400 × 4800 - HUXGA 6400 x 4800 + HUXGA 6400 x 4800 !!! 10000 x 10000 - !!! 10000 x 10000 + !!! 10000 x 10000 Standard sizes: - Standardauflösungen: + Standardauflösungen: &Height: - &Höhe: + &Höhe: Aspect ratio: - Seitenverhältnis: + Seitenverhältnis: &Screen - Bild&schirm + Bild&schirm Alt+S - Alt+S + Alt+S &4:3 - &4:3 + &4:3 Alt+4 - Alt+4 + Alt+4 1&6:9 - 1&6:9 + 1&6:9 Alt+6 - Alt+6 + Alt+6 &1:1 - &1:1 + &1:1 Alt+1 - Alt+1 + Alt+1 Image comment - Kommentar zum Bild + Kommentar zum Bild Insert MIBA - MIBA-Informationen einfügen + MIBA-Informationen einfügen Insert comment - Kommentar einfügen + Kommentar einfügen Gui::Dialog::DlgSettingsMacro Macro - Makro + Makro Macro recording settings - Einstellugen für Makroaufzeichnung + Einstellugen für Makroaufzeichnung Logging Commands - Befehle protokollieren + Befehle protokollieren Show script commands in python console - Skript-Befehle in Pythonkonsole anzeigen + Skript-Befehle in Pythonkonsole anzeigen Log all commands issued by menus to file: - Alle Menübefehle in Datei protokollieren: + Alle Menübefehle in Datei protokollieren: FullScript.FCScript - FullScript.FCScript + FullScript.FCScript Gui commands - GUI-Befehle + GUI-Befehle Recording GUI commands - GUI-Befehle aufzeichnen + GUI-Befehle aufzeichnen Record as comment - Aufnahme als Kommentar behandeln + Aufnahme als Kommentar behandeln Macro path - Makro-Zielpfad + Makro-Zielpfad General macro settings - Allgemeine Makro-Einstellungen + Allgemeine Makro-Einstellungen Run macros in local environment - Makro in lokaler Umgebung ausführen + Makro in lokaler Umgebung ausführen Gui::Dialog::DlgSettingsUnits Units - Einheiten + Einheiten Units settings - Einheiten-Einstellungen + Einheiten-Einstellungen Standard (mm/kg/s/degree) - Standard (mm/kg/s/Grad) + Standard (mm/kg/s/Grad) MKS (m/kg/s/degree) - MKS (m/kg/s/Grad) + MKS (m/kg/s/Grad) Magnitude - Größenordnung + Größenordnung Unit - Einheit + Einheit User system: - Einheitsystem: - - - Imperial (in/lb) - Imperial (in/lb) + Einheitsystem: US customary (in/lb) - + US-üblich (in/lb) Number of decimals: - + Anzahl der Nachkommastellen: Imperial decimal (in/lb) - + Imperial Dezimal (in/lb) Gui::Dialog::DlgSettingsViewColor Colors - Farben + Farben Selection - Auswahl + Auswahl Enable selection highlighting - Hervorhebung von Auswahl aktivieren + Hervorhebung von Auswahl aktivieren Enable preselection highlighting - Hervorhebung von Vorauswahl aktivieren + Hervorhebung von Vorauswahl aktivieren Background color - Hintergrundfarbe + Hintergrundfarbe Middle color - Mittlere Farbe + Mittlere Farbe Color gradient - Farbverlauf + Farbverlauf Simple color - Einfache Farbe - - - Default colors - Standardfarben - - - Edited edge color - Farbe zu bearbeitender Kanten - - - Edited vertex color - Farbe zu bearbeitender Vertexe - - - Construction geometry - Konstruktionsgeometrie - - - Fully constrained geometry - Komplett festgelegte Geometrien - - - The color of vertices being edited - Die Farbe der zu bearbeitenden Vertexe - - - The color of edges being edited - Die Farbe der zu bearbeitenden Kanten - - - The color of construction geometry in edit mode - Farbe von Konstruktionsgeometrie im Bearbeitungsmodus - - - The color of fully constrained geometry in edit mode - Farbe einer vollständig festgelegten Geometrie im Bearbeitungsmodus - - - Cursor text color - Cursor-Textfarbe - - - Default shape color - Standard Shape Farbe - - - The default color for new shapes - Standardfarbe für neue Formen - - - Default line width and color - Standardmäßige Linienstärke und -farbe - - - The default line color for new shapes - Standardmäßige Linienfarbe für neue Formen - - - The default line thickness for new shapes - Die Standard Linienstärke für neue Shapes - - - px - px + Einfache Farbe Gui::Dialog::DlgTipOfTheDay Tip of the day - Tipp des Tages + Tipp des Tages <b><font face="Times New Roman"><font size="+3">Did you know...</font></font></b> - <b><font face="Times New Roman"><font size="+3">Wussten Sie schon...</font></font></b> + <b><font face="Times New Roman"><font size="+3">Wussten Sie schon...</font></font></b> &Show tips at start up - Tipps beim &Start anzeigen + Tipps beim &Start anzeigen Alt+S - Alt+S + Alt+S &Next Tip - &Nächster Tipp + &Nächster Tipp Alt+N - Alt+N + Alt+N &Close - S&chließen + S&chließen Alt+C - Alt+I + Alt+I @@ -2666,488 +2486,480 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Download failed: %1 - Download fehlgeschlagen: %1 + Download fehlgeschlagen: %1 If you want to learn more about FreeCAD you must go to %1 or press the Help item in the Help menu. - Wenn Sie mehr über FreeCAD erfahren möchten, besuchen Sie %1 oder drücken Sie auf Hilfe im Hilfe-Menü. + Wenn Sie mehr über FreeCAD erfahren möchten, besuchen Sie %1 oder drücken Sie auf Hilfe im Hilfe-Menü. Gui::Dialog::DlgUnitsCalculator Unit mismatch - + Einheit(en)-Konflikt Gui::Dialog::DockablePlacement Placement - Placement + Placement Gui::Dialog::DownloadDialog Download - Herunterladen + Herunterladen Cancel - Abbrechen + Abbrechen Close - Schließen + Schließen There already exists a file called %1 in the current directory. Overwrite? - Es existiert bereits eine Datei namens %1 im aktuellen Verzeichnis. Überschreiben? + Es existiert bereits eine Datei namens %1 im aktuellen Verzeichnis. Überschreiben? Unable to save the file %1: %2. - Konnte Datei %1 nicht speichern: %2. + Konnte Datei %1 nicht speichern: %2. Downloading %1. - Herunterladen von %1. + Herunterladen von %1. Download canceled. - Herunterladen abgebrochen. + Herunterladen abgebrochen. Download failed: %1. - Download fehlgeschlagen: %1. + Download fehlgeschlagen: %1. Downloaded %1 to current directory. - %1 in aktuelles Verzeichnis heruntergeladen. + %1 in aktuelles Verzeichnis heruntergeladen. %1 at %2 - + %1 bei %2 Gui::Dialog::DownloadItem Save File - + Datei speichern Download canceled: %1 - + Download abgebrochen: %1 Open containing folder - + Enthaltenden Ordner öffnen Error opening save file: %1 - + Fehler beim Öffnen der gespeicherten Datei: %1 Error saving: %1 - + Fehler beim Speichern: %1 Network Error: %1 - + Netzwerkfehler: %1 seconds - + Sekunden minutes - + Minuten - %4 %5 remaining - + - %4 %5 verbleibend %1 of %2 (%3/sec) %4 - + %1 of %2 (%3/Sek) %4 ? - + ? %1 of %2 - Stopped - + %1 of %2 - Gestoppt bytes - + Bytes kB - + kB MB - + MB Gui::Dialog::DownloadManager Downloads - + Downloads Clean up - + Aufräumen 0 Items - + 0 Elemente Download Manager - + Download-Manager 1 Download - + 1 Download %1 Downloads - + %1 Downloads Gui::Dialog::IconDialog - - Add icon - Symbol hinzufügen - Icon folders - + Symbol-Ordner Add icon folder - + Symbol-Ordner hinzufügen Gui::Dialog::IconFolders Add or remove custom icon folders - + Hinzufügen oder Entfernen von benutzerdefinierten Symbol-Ordnern Remove folder - + Ordner entfernen Removing a folder only takes effect after an application restart. - + Entfernen eines Ordners wird erst wirksam, nachdem eine Anwendung neu gestartet wurde. Gui::Dialog::InputVector Input vector - Eingabevektor + Eingabevektor Vector - Vektor + Vektor Z: - Z: + Z: Y: - Y: + Y: X: - X: - - - OK - OK + X: Gui::Dialog::LicenseDialog Copyright - Copyright + Copyright Gui::Dialog::MouseButtons Mouse buttons - Maustasten + Maustasten Configuration - Konfiguration + Konfiguration Selection: - Auswahl: + Auswahl: Panning - Verschieben + Verschieben Rotation: - Drehung: + Drehung: Zooming: - Zoomen: + Zoomen: Gui::Dialog::ParameterGroup Expand - Erweitern + Erweitern Add sub-group - Gruppe hinzufügen + Gruppe hinzufügen Remove group - Gruppe entfernen + Gruppe entfernen Rename group - Gruppe umbenennen + Gruppe umbenennen Export parameter - Parameter exportieren + Parameter exportieren Import parameter - Parameter importieren + Parameter importieren Collapse - Reduzieren + Reduzieren Do really want to remove this parameter group? - Möchten Sie diese Gruppe wirklich entfernen? + Möchten Sie diese Gruppe wirklich entfernen? Existing sub-group - Bereits vorhandene Gruppe + Bereits vorhandene Gruppe The sub-group '%1' already exists. - Diese Gruppe '%1' ist bereits vorhanden. + Diese Gruppe '%1' ist bereits vorhanden. Export parameter to file - Parameter in Datei schreiben + Parameter in Datei schreiben XML (*.FCParam) - XML (*.FCParam) + XML (*.FCParam) Import parameter from file - Parameter aus Datei lesen + Parameter aus Datei lesen Import Error - Fehler bei Importieren + Fehler bei Importieren Reading from '%1' failed. - Lesen von '%1' fehlgeschlagen. + Lesen von '%1' fehlgeschlagen. Gui::Dialog::ParameterValue Change value - Wert ändern + Wert ändern Remove key - Schlüssel entfernen + Schlüssel entfernen Rename key - Schlüssel umbenennen + Schlüssel umbenennen New - Neu + Neu New string item - Neue Zeichenkette + Neue Zeichenkette New float item - Neuer Gleitkommawert + Neuer Gleitkommawert New integer item - Neue Ganzzahl + Neue Ganzzahl New unsigned item - Neue positive Ganzzahl + Neue positive Ganzzahl New Boolean item - Neuer Bool'scher Wert + Neuer Bool'scher Wert Existing item - Bereits vorhandener Schlüssel + Bereits vorhandener Schlüssel The item '%1' already exists. - Der Schlüssel '%1' ist bereits vorhanden. + Der Schlüssel '%1' ist bereits vorhanden. Gui::Dialog::Placement Placement - Placement + Placement OK - OK + OK Translation: - Verschiebung: + Verschiebung: Z: - Z: + Z: Y: - Y: + Y: X: - X: + X: Rotation: - Drehung: + Drehung: Angle: - Winkel: + Winkel: Axis: - Achse: + Achse: Center: - Drehpunkt: + Drehpunkt: Pitch: - Steigung: + Steigung: Roll: - Roll: + Roll: Yaw: - Gierung: + Gierung: Rotation axis with angle - Rotationsachse mit Winkel + Rotationsachse mit Winkel Euler angles - Euler-Winkel + Euler-Winkel Apply placement changes immediately - Änderungen sofort übernehmen + Änderungen sofort übernehmen Apply incremental changes to object placement - Änderungen an Objektplacement inkrementell übernehmen + Änderungen an Objektplacement inkrementell übernehmen Apply - Übernehmen + Übernehmen Reset - Zurücksetzen + Zurücksetzen Close - Schließen + Schließen Incorrect quantity - + Falsche Menge There are input fields with incorrect input, please ensure valid placement values! - + Es gibt Eingabefelder mit falschem Inhalt, bitte stellen Sie die Gültigkeit der Koordinaten-Werte sicher! Gui::Dialog::PrintModel Button - Schaltfläche + Schaltfläche Command - Befehl + Befehl Gui::Dialog::SceneInspector Dialog - Dialog + Dialog Close - Schließen + Schließen Refresh - Aktualisieren + Aktualisieren Gui::Dialog::SceneModel Inventor Tree - Szenengraph + Szenengraph Nodes - Knoten + Knoten Name @@ -3158,69 +2970,61 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Gui::Dialog::TextureMapping Texture - Textur + Textur Texture mapping - Texturabbildung + Texturabbildung Global - Global + Global Environment - Umgebung + Umgebung Image files (%1) - Bilddateien (%1) + Bilddateien (%1) No image - Kein Bild + Kein Bild The specified file is not a valid image file. - Die angegebene Datei ist keine gültige Bilddatei. + Die angegebene Datei ist keine gültige Bilddatei. No 3d view - Keine 3D-Ansicht + Keine 3D-Ansicht No active 3d view found. - Keine aktive 3D-Ansicht gefunden. + Keine aktive 3D-Ansicht gefunden. Gui::Dialog::Transform Cancel - Abbrechen + Abbrechen Transform - Transformieren + Transformieren Gui::DlgTreeWidget Dialog - Dialog + Dialog Items - Elemente - - - OK - OK - - - Cancel - Abbrechen + Elemente @@ -3231,166 +3035,166 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Gui::DockWnd::CombiView CombiView - Combi-Ansicht + Combi-Ansicht Project - Projekt + Projekt Tasks - Aufgaben + Aufgaben Model - + Modell Gui::DockWnd::HelpView Previous - Letzte + Letzte Next - Weiter + Weiter Home - Startseite + Startseite Open - Öffnen + Öffnen Open file - Datei öffnen + Datei öffnen All HTML files (*.html *.htm) - Alle HTML-Dateien (*.html *.htm) + Alle HTML-Dateien (*.html *.htm) External browser - Externer Browser + Externer Browser No external browser found. Specify in preferences, please - Kein externer Browser gefunden. Setzen Sie die Einstellungen hierfür + Kein externer Browser gefunden. Setzen Sie die Einstellungen hierfür Starting of %1 failed - Start von %1 fehlgeschlagen + Start von %1 fehlgeschlagen Gui::DockWnd::PropertyDockView Property View - Eigenschaften-Ansicht + Eigenschaften-Ansicht Gui::DockWnd::ReportOutput Logging - Protokoll-Meldungen + Protokoll-Meldungen Warning - Warnung + Warnung Error - Fehlermeldungen + Fehlermeldungen Options - Optionen + Optionen Clear - Löschen + Löschen Save As... - Speichern unter... + Speichern unter... Save Report Output - Ausgabe speichern + Ausgabe speichern Plain Text Files (*.txt *.log) - Einfache Textdateien (*.txt *.log) + Einfache Textdateien (*.txt *.log) Go to end - Go to end + Go to end Redirect Python output - Python-Ausgabe umleiten + Python-Ausgabe umleiten Redirect Python errors - Python-Fehler umleiten + Python-Fehler umleiten Gui::DockWnd::ReportView Output - Ausgabe + Ausgabe Python console - Python-Konsole + Python-Konsole Gui::DockWnd::SelectionView Property View - Eigenschaften-Ansicht + Eigenschaften-Ansicht Search - + Suche Searches object labels - + Sucht Objektbezeichnungen Clears the search field - + Löscht das Suchfeld Select only - + Nur auswählen Selects only this object - + Wählt nur dieses Objekt Deselect - + Auswahl aufheben Deselects this object - + Hebt die Auswahl dieses Objekts auf Zoom fit - + Zoom anpassen Selects and fits this object in the 3D window - + Wählt dieses Objekt aus und passt es an das 3D-Fenster an Go to selection @@ -3398,224 +3202,224 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Selects and locates this object in the tree view - + Auswahl und Auffinden dieses Objektes in der Baumansicht Gui::DockWnd::TaskPanelView Task View - Aufgaben + Aufgaben Gui::DockWnd::TextBrowser Could not open file. - Datei konnte nicht geöffnet werden. + Datei konnte nicht geöffnet werden. You tried to access the address %1 which is currently unavailable. Please make sure that the URL exists and try reloading the page. - Sie haben versucht, die Adresse %1 aufzurufen, die im Moment nicht erreichbar ist. Stellen Sie sicher, dass die URL existiert und versuchen Sie die Seite erneut zu laden. + Sie haben versucht, die Adresse %1 aufzurufen, die im Moment nicht erreichbar ist. Stellen Sie sicher, dass die URL existiert und versuchen Sie die Seite erneut zu laden. Connecting to %1 - Verbinden mit %1 + Verbinden mit %1 Sending to %1 - Senden an %1 + Senden an %1 Reading from %1 - Lesen von %1 + Lesen von %1 Download failed: %1. - Download fehlgeschlagen: %1. + Download fehlgeschlagen: %1. Previous - Letzte + Letzte Forward - Vor + Vor Home - Startseite + Startseite Refresh - Aktualisieren + Aktualisieren Copy - Kopieren + Kopieren Select all - Alles auswählen + Alles auswählen No description for - Keine Beschreibung für + Keine Beschreibung für Gui::DocumentModel Application - Applikation + Applikation Labels & Attributes - Bezeichnungen & Eigenschaften + Bezeichnungen & Eigenschaften Gui::EditorView Modified file - Geänderte Datei + Geänderte Datei %1. This has been modified outside of the source editor. Do you want to reload it? - %1. + %1. Diese Datei wurde außerhalb des Editors verändert. Wollen Sie sie erneut laden? Unsaved document - Nicht gespeichertes Dokument + Nicht gespeichertes Dokument The document has been modified. Do you want to save your changes? - Das Dokument wurde geändert. + Das Dokument wurde geändert. Sollen die Änderungen gespeichert werden? FreeCAD macro (*.FCMacro);;Python (*.py) - FreeCAD-Makro (*.FCMacro);;Python (*.py) + FreeCAD-Makro (*.FCMacro);;Python (*.py) Export PDF - PDF exportieren + PDF exportieren PDF file (*.pdf) - PDF-Datei (*.pdf) + PDF-Datei (*.pdf) untitled[*] - Unbenannt[*] + Unbenannt[*] - Editor - - Editor + - Editor %1 chars removed - %1 Zeichen gelöscht + %1 Zeichen gelöscht %1 chars added - %1 Zeichen hinzugefügt + %1 Zeichen hinzugefügt Formatted - Formatiert + Formatiert Gui::FileChooser Select a file - Wählen Sie eine Datei aus + Wählen Sie eine Datei aus Select a directory - Wählen Sie ein Verzeichnis aus + Wählen Sie ein Verzeichnis aus Gui::FileDialog Save as - Speichern unter + Speichern unter Open - Öffnen + Öffnen Gui::FileOptionsDialog Extended - Erweitert + Erweitert All files (*.*) - Alle Dateien (*.*) + Alle Dateien (*.*) Gui::Flag Top left - Oben links + Oben links Bottom left - Unten links + Unten links Top right - Oben rechts + Oben rechts Bottom right - Unten rechts + Unten rechts Remove - Entfernen + Entfernen Gui::GraphvizView PNG format (*.png) - + PNG Format (*.png) Bitmap format (*.bmp) - + Bitmap Format (.bmp) GIF format (*.gif) - + GIF Format (*.gif) JPG format (*.jpg) - + JPG Format (*.jpg) SVG format (*.svg) - + SVG Format (*.SVG) PDF format (*.pdf) - + PDF Format (*.pdf) Export graph - + Graphik exportieren @@ -3626,206 +3430,207 @@ Sollen die Änderungen gespeichert werden? Save value - + Wert speichern Gui::InventorNavigationStyle Press CTRL and left mouse button - Drücken Sie STRG und die linke Maustaste + Drücken Sie STRG und die linke Maustaste Press middle mouse button - Drücken Sie die mittlere Maustaste + Drücken Sie die mittlere Maustaste Press left mouse button - Drücken Sie die linke Maustaste + Drücken Sie die linke Maustaste Scroll middle mouse button - Scrollen Sie die mittlere Maustaste + Scrollen Sie die mittlere Maustaste Gui::LabelEditor List - + Liste Gui::LocationDialog Wrong direction - Falsche Richtung + Falsche Richtung Direction must not be the null vector - Richtungsvektor darf nicht der Nullvektor sein + Richtungsvektor darf nicht der Nullvektor sein X - X + X Y - Y + Y Z - Z + Z User defined... - Benutzerdefiniert... + Benutzerdefiniert... Gui::LocationWidget X: - X: + X: Y: - Y: + Y: Z: - Z: + Z: Direction: - Richtung: + Richtung: Gui::MacroCommand Macros - Makros + Makros Gui::MainWindow Dimension - Abmessung + Abmessung Ready - Bereit + Bereit Toggles this toolbar - Symbolleiste ein-/ausschalten + Symbolleiste ein-/ausschalten Toggles this dockable window - Andockbares Fenster ein-/ausschalten + Andockbares Fenster ein-/ausschalten Close All - Alles schließen + Alles schließen Object dependencies - + Objektabhängigkeiten The selected objects have a dependency to unselected objects. Do you want to copy them, too? - + Die ausgewählten Objekte enthalten eine Abhängigkeit zu nicht gewählten Objekten. +Möchten sie diese ebenfalls kopieren? Gui::ManualAlignment Manual alignment - Manuelle Ausrichtung + Manuelle Ausrichtung The alignment is already in progress. - Die Ausrichtung wird bereits ausgeführt. + Die Ausrichtung wird bereits ausgeführt. Alignment[*] - Ausrichtung [*] + Ausrichtung [*] Please, select at least one point in the left and the right view - Bitte mindestens einen Punkt in der linken und rechten Ansicht auswählen + Bitte mindestens einen Punkt in der linken und rechten Ansicht auswählen Please, select at least %1 points in the left and the right view - Bitte mindestens %1 Punkte in der linken und rechten Ansicht auswählen + Bitte mindestens %1 Punkte in der linken und rechten Ansicht auswählen Please pick points in the left and right view - Bitte Punkte in der linken und rechten Ansicht auswählen + Bitte Punkte in der linken und rechten Ansicht auswählen The alignment has finished - Ausrichtung abgeschlossen + Ausrichtung abgeschlossen The alignment has been canceled - Ausrichtung abgebrochen + Ausrichtung abgebrochen Too few points picked in the left view. At least %1 points are needed. - Zu wenige Punkte in der linken Ansicht ausgewählt. Mindestens %1 Punkte werden benötigt. + Zu wenige Punkte in der linken Ansicht ausgewählt. Mindestens %1 Punkte werden benötigt. Too few points picked in the right view. At least %1 points are needed. - Zu wenige Punkte in der rechten Ansicht ausgewählt. Mindestens %1 Punkte werden benötigt. + Zu wenige Punkte in der rechten Ansicht ausgewählt. Mindestens %1 Punkte werden benötigt. Different number of points picked in left and right view. On the left view %1 points are picked, on the right view %2 points are picked. - Unterschiedliche Anzahl von Punkten in der linken und rechten Ansicht ausgewählt. + Unterschiedliche Anzahl von Punkten in der linken und rechten Ansicht ausgewählt. In der linken Ansicht wurden %1 Punkte ausgewählt. In der rechten Ansicht wurden %2 Punkte ausgewählt. Try to align group of views - Versuche Ansichtsgruppen auszurichten + Versuche Ansichtsgruppen auszurichten The alignment failed. How do you want to proceed? - Das Ausrichten ist fehlgeschlagen. Wie möchten die fortfahren? + Das Ausrichten ist fehlgeschlagen. Wie möchten die fortfahren? Retry - Erneut versuchen + Erneut versuchen Ignore - Ignorieren + Ignorieren Abort - Abbrechen + Abbrechen Different number of points picked in left and right view. On the left view %1 points are picked, on the right view %2 points are picked. - Unterschiedliche Anzahl von Punkten in der linken und rechten Ansicht ausgewählt. In der linken Ansicht wurden %1 Punkte ausgewählt. In der rechten Ansicht wurden %2 Punkte ausgewählt. + Unterschiedliche Anzahl von Punkten in der linken und rechten Ansicht ausgewählt. In der linken Ansicht wurden %1 Punkte ausgewählt. In der rechten Ansicht wurden %2 Punkte ausgewählt. Point picked at (%1,%2,%3) - Punkte ausgewählt an (%1,%2,%3) + Punkte ausgewählt an (%1,%2,%3) No point was picked - Es wurde kein Punkt ausgewählt + Es wurde kein Punkt ausgewählt No point was found on model - + Auf dem Modell wurde kein Punkt gefunden @@ -3833,7 +3638,7 @@ How do you want to proceed? Download started... - Download hat begonnen... + Download hat begonnen... @@ -3845,547 +3650,520 @@ How do you want to proceed? Save value - + Wert speichern Clear list - + Liste leeren Gui::ProgressBar Remaining: %1 - Verbleibend: %1 + Verbleibend: %1 Aborting - Abbrechen + Abbrechen Do you really want to abort the operation? - Möchten Sie die Operation wirklich abbrechen? + Möchten Sie die Operation wirklich abbrechen? Gui::ProgressDialog Remaining: %1 - Verbleibend: %1 + Verbleibend: %1 Aborting - Abbrechen + Abbrechen Do you really want to abort the operation? - Möchten Sie die Operation wirklich abbrechen? + Möchten Sie die Operation wirklich abbrechen? Gui::PropertyEditor::LinkLabel Edit... - + Bearbeiten... Gui::PropertyEditor::PropertyModel Property - Eigenschaft + Eigenschaft Value - Wert + Wert Gui::PropertyView View - Ansicht + Ansicht Data - Daten + Daten Gui::PythonConsole System exit - System beenden + System beenden The application is still running. Do you want to exit without saving your data? - Die Anwendung läuft immer noch. + Die Anwendung läuft immer noch. Wollen Sie sie beenden, ohne Ihre Daten zu speichern? Python console - Python-Konsole + Python-Konsole Unhandled PyCXX exception. - Unbehnadelte PyCXX-Ausnahme. + Unbehnadelte PyCXX-Ausnahme. Unhandled FreeCAD exception. - Unbehandelte FreeCAD-Ausnahme. + Unbehandelte FreeCAD-Ausnahme. Unhandled unknown C++ exception. - Unbehandelte C++-Ausnahme. + Unbehandelte C++-Ausnahme. &Copy command - &Befehle kopieren + &Befehle kopieren &Copy history - &Verlauf kopieren + &Verlauf kopieren Save history as... - Verlauf speichern unter... + Verlauf speichern unter... Insert file name... - Dateinamen einfügen... + Dateinamen einfügen... Save History - Verlauf speichern + Verlauf speichern Macro Files (*.FCMacro *.py) - Makro-Dateien (*.FCMacro *.py) + Makro-Dateien (*.FCMacro *.py) Insert file name - Dateinamen einfügen + Dateinamen einfügen All Files (*.*) - Alle Dateien (*.*) - - - Python Input Dialog - Pythoneingabe-Dialog + Alle Dateien (*.*) Unhandled std C++ exception. - Unbehandelte std C++-Ausnahme. + Unbehandelte std C++-Ausnahme. Word wrap - Zeilenumbruch + Zeilenumbruch &Copy - &Kopieren + &Kopieren &Paste - Ein&fügen + Ein&fügen Select All - Alles auswählen + Alles auswählen Clear console - Konsole leeren + Konsole leeren Gui::PythonEditor Comment - Kommentieren + Kommentieren Uncomment - Entkommentieren - - - - Gui::PythonInputField - - OK - OK - - - Clear - Löschen + Entkommentieren Gui::RecentFilesAction Open file %1 - Öffne Datei %1 + Öffne Datei %1 File not found - Datei nicht gefunden + Datei nicht gefunden The file '%1' cannot be opened. - Die Datei '%1' kann nicht geöffnet werden. + Die Datei '%1' kann nicht geöffnet werden. Gui::SelectModule Select module - Modul auswählen + Modul auswählen Open %1 as - Öffne %1 als + Öffne %1 als Select - Wähle + Wähle Gui::StdCmdDescription Help - Hilfe + Hilfe Des&cription - Bes&chreibung + Bes&chreibung Long description of commands - Ausführliche Beschreibung aller Befehle + Ausführliche Beschreibung aller Befehle Gui::StdCmdDownloadOnlineHelp Help - Hilfe + Hilfe Download online help - Online-Hilfe herunterladen + Online-Hilfe herunterladen Download %1's online help - Online-Hilfe von %1 herunterladen + Online-Hilfe von %1 herunterladen Non-existing directory - Nicht existierendes Verzeichnis + Nicht existierendes Verzeichnis The directory '%1' does not exist. Do you want to specify an existing directory? - Das Verzeichnis '%1' existiert nicht. + Das Verzeichnis '%1' existiert nicht. Möchten Sie ein existierendes Verzeichnis angeben? Missing permission - Fehlende Berechtigung + Fehlende Berechtigung You don't have write permission to '%1' Do you want to specify another directory? - Sie haben keine Schreibberechtigung für '%1' + Sie haben keine Schreibberechtigung für '%1' Möchten Sie ein anderes Verzeichnis angeben? Stop downloading - Downloadvorgang abbrechen + Downloadvorgang abbrechen Gui::StdCmdPythonHelp Tools - Werkzeuge - - - Python Modules - Python-Module - - - Opens a browser to show the Python modules - Browser zum Anzeigen aller Python-Module öffnen + Werkzeuge Automatic python modules documentation - + Automatische Python Modul Dokumentation Opens a browser to show the Python modules documentation - + Öffnet einen Browser um die Python Modul Dokumentation zu zeigen Gui::TaskBoxAngle Angle - Winkel + Winkel Gui::TaskBoxPosition Position - Position + Position Gui::TaskView::TaskAppearance Plot mode: - Plotmodus: + Plotmodus: Point size: - Punktgröße: + Punktgröße: Line width: - Linienstärke: + Linienstärke: Transparency: - Transparenz: + Transparenz: Appearance - Erscheinungsbild + Erscheinungsbild Document window: - Dokumentfenster: + Dokumentfenster: Gui::TaskView::TaskDialog A dialog is already open in the task panel - Ein Dialog im Arbeitspanel ist bereits geöffnet + Ein Dialog im Arbeitspanel ist bereits geöffnet Gui::TaskView::TaskEditControl Edit - Bearbeiten + Bearbeiten Gui::TaskView::TaskSelectLinkProperty Appearance - Erscheinungsbild + Erscheinungsbild ... - ... + ... edit selection - Selektion bearbeiten + Selektion bearbeiten Gui::TouchpadNavigationStyle Press left mouse button - Drücken Sie die linke Maustaste + Drücken Sie die linke Maustaste Press SHIFT button - Drücken Sie die Umschalt-Taste + Drücken Sie die Umschalt-Taste Press ALT button - Bitte ALT drücken - - - Press PgUp/PgDown button - Bitte Bild auf/Bild ab drücken + Bitte ALT drücken Press CTRL and SHIFT buttons - + Drücken Sie STRG und die UMSCHALT-Tasten Gui::TreeDockWidget Tree view - Baumansicht + Baumansicht Gui::TreeWidget Create group... - Gruppe erstellen... + Gruppe erstellen... Create a group - Erstelle eine Gruppe + Erstelle eine Gruppe Group - Gruppe + Gruppe Rename - Umbenennen + Umbenennen Rename object - Objekt umbenennen + Objekt umbenennen Labels & Attributes - Bezeichnungen & Eigenschaften + Bezeichnungen & Eigenschaften Application - Applikation + Applikation Finish editing - Bearbeitung beenden + Bearbeitung beenden Finish editing object - Berabeitungs des Objekts beenden + Berabeitungs des Objekts beenden Activate document - Dokument aktivieren + Dokument aktivieren Activate document %1 - Dokument %1 aktivieren + Dokument %1 aktivieren Gui::View3DInventor Export PDF - PDF exportieren + PDF exportieren PDF file (*.pdf) - PDF-Datei (*.pdf) + PDF-Datei (*.pdf) Gui::WorkbenchGroup Select the '%1' workbench - Wähle den Arbeitsbereich %1 + Wähle den Arbeitsbereich %1 NetworkAccessManager <qt>Enter username and password for "%1" at %2</qt> - + <qt>Geben Sie Benutzernamen und Passwort für "%1" bei %2 ein</qt> <qt>Connect to proxy "%1" using:</qt> - + <qt>Verbinde mit Proxy "%1" durch:</qt> Position Form - Form + Form X: - X: + X: Y: - Y: + Y: Z: - Z: + Z: 0.1 mm - 0.1 mm + 0.1 mm 0.5 mm - 0.5 mm + 0.5 mm 1 mm - 1 mm + 1 mm 2 mm - 2 mm + 2 mm 5 mm - 5 mm + 5 mm 10 mm - 10 mm + 10 mm 20 mm - 20 mm + 20 mm 50 mm - 50 mm + 50 mm 100 mm - 100 mm + 100 mm 200 mm - 200 mm + 200 mm 500 mm - 500 mm + 500 mm 1 m - 1 m + 1 m 2 m - 2 m + 2 m 5 m - 5 m + 5 m Grid Snap in - Am Gitter ausrichten + Am Gitter ausrichten @@ -4396,860 +4174,846 @@ Möchten Sie ein anderes Verzeichnis angeben? Input in line %1 is not a number - + Eingabe in Zeile %1 ist keine Zahl QDockWidget Tree view - Baumansicht + Baumansicht Property view - Eigenschaften + Eigenschaften Selection view - Selektionsansicht + Selektionsansicht Report view - Ausgabefenster + Ausgabefenster Task View - Aufgaben + Aufgaben Combo View - Combo-Ansicht + Combo-Ansicht Toolbox - Werkzeugkasten + Werkzeugkasten Python console - Python-Konsole + Python-Konsole Display properties - Anzeigeeigenschaften + Anzeigeeigenschaften QObject General - Allgemein + Allgemein Display - Anzeige + Anzeige Unknown filetype - Unbekannter Dateityp + Unbekannter Dateityp Cannot open unknown filetype: %1 - Kann unbekannten Dateityp nicht öffnen: %1 + Kann unbekannten Dateityp nicht öffnen: %1 Cannot save to unknown filetype: %1 - Kann in unbekannten Dateityp nicht speichern: %1 + Kann in unbekannten Dateityp nicht speichern: %1 Workbench failure - Wechsel von Arbeitsbereich fehlgeschlagen + Wechsel von Arbeitsbereich fehlgeschlagen %1 - %1 + %1 Unable to launch Qt Assistant (%1) - Qt Assistant (%1) kann nicht gestartet werden + Qt Assistant (%1) kann nicht gestartet werden Exception - Ausnahme + Ausnahme Open document - Öffne Dokument + Öffne Dokument Import file - Importiere Datei + Importiere Datei Export file - Exportiere Datei + Exportiere Datei Printing... - Drucken... + Drucken... Cannot load workbench - Kann Arbeitsbereich nicht laden + Kann Arbeitsbereich nicht laden A general error occurred while loading the workbench - Allgemeiner Fehler beim Laden des Arbeitsbereiches aufgetreten + Allgemeiner Fehler beim Laden des Arbeitsbereiches aufgetreten Save views... - Ansichten speichern... + Ansichten speichern... Load views... - Ansichten laden... + Ansichten laden... Freeze view - Ansicht einfrieren + Ansicht einfrieren Clear views - Ansichten löschen + Ansichten löschen Restore view &%1 - Ansicht &%1 wiederherstellen + Ansicht &%1 wiederherstellen Save frozen views - Eingefrorene Ansichten speichern + Eingefrorene Ansichten speichern Frozen views (*.cam) - Feste Kamerapositionen (*.cam) + Feste Kamerapositionen (*.cam) Restore views - Ansichten wiederherstellen + Ansichten wiederherstellen Importing the restored views would clear the already stored views. Do you want to continue? - Wiederherstellen der importierten Ansichten löscht die bereits gespeicherten Ansichten. + Wiederherstellen der importierten Ansichten löscht die bereits gespeicherten Ansichten. Wollen Sie fortfahren? Restore frozen views - Eingefrorene Ansichten wiederherstellen + Eingefrorene Ansichten wiederherstellen Cannot open file '%1'. - Kann Datei '%1' nicht öffnen. + Kann Datei '%1' nicht öffnen. Docked - Angedockt + Angedockt Undocked - Abgedockt + Abgedockt Fullscreen - Vollbild + Vollbild files - Dateien + Dateien Save picture - Bildinhalt speichern + Bildinhalt speichern New sub-group - Neue Gruppe + Neue Gruppe Enter the name: - Geben Sie einen Namen an: + Geben Sie einen Namen an: New text item - Neuer Texteintrag + Neuer Texteintrag Enter your text: - Geben Sie einen Text ein: + Geben Sie einen Text ein: New integer item - Neue Ganzzahl + Neue Ganzzahl Enter your number: - Geben Sie einen ganzzahligen Wert an: + Geben Sie einen ganzzahligen Wert an: New unsigned item - Neue positive Ganzzahl + Neue positive Ganzzahl New float item - Neuer Gleitkommawert + Neuer Gleitkommawert New Boolean item - Neuer Bool'scher Wert + Neuer Bool'scher Wert Choose an item: - Wählen Sie einen Eintrag aus: + Wählen Sie einen Eintrag aus: Rename group - Gruppe umbenennen + Gruppe umbenennen The group '%1' cannot be renamed. - Die Gruppe '%1' kann nicht umbenannt werden. + Die Gruppe '%1' kann nicht umbenannt werden. Existing group - Bereits vorhandene Gruppe + Bereits vorhandene Gruppe The group '%1' already exists. - Die Gruppe '%1' ist bereits vorhanden. + Die Gruppe '%1' ist bereits vorhanden. Change value - Wert ändern + Wert ändern Save document under new filename... - Dokument unter neuem Dateinamen speichern... + Dokument unter neuem Dateinamen speichern... Saving aborted - Speichern abgebrochen + Speichern abgebrochen Unsaved document - Nicht gespeichertes Dokument - - - Save document before close? - Soll das Dokument vorher gespeichert werden? + Nicht gespeichertes Dokument Save Macro - Makro speichern + Makro speichern Finish - Fertig + Fertig Clear - Löschen + Löschen Cancel - Abbrechen + Abbrechen Inner - Innen + Innen Outer - Außen + Außen No Browser - Kein Browser + Kein Browser Unable to open your browser. Please open a browser window and type in: http://localhost:%1. - Kann Browser nicht öffnen. + Kann Browser nicht öffnen. Bitte starten Sie einen Browser und geben darin ein: http://localhost:%1. No Server - Kein Server + Kein Server Unable to start the server to port %1: %2. - Kann Server auf Port %1 nicht starten: %2. + Kann Server auf Port %1 nicht starten: %2. Unable to open your system browser. - Kann Systembrowser nicht starten. + Kann Systembrowser nicht starten. Options... - Einstellungen... + Einstellungen... Out of memory - Nicht genügend Speicher + Nicht genügend Speicher Not enough memory available to display the data. - Nicht genüged Speicher verfügbar, um die Daten darstellen zu können. + Nicht genüged Speicher verfügbar, um die Daten darstellen zu können. Cannot find file %1 - Kann Datei %1 nicht finden + Kann Datei %1 nicht finden Cannot find file %1 neither in %2 nor in %3 - Kann Datei %1 weder in %2 nich in %3 finden + Kann Datei %1 weder in %2 nich in %3 finden Save %1 Document - Dokument %1 speichern + Dokument %1 speichern %1 document (*.FCStd) - %1-Dokument (*.FCStd) - - - Save As - Speichern unter - - - %1 already exists. -Do you want to replace it? - %1 besteht bereits. -Möchten Sie sie ersetzen? + %1-Dokument (*.FCStd) Document not closable - Dokument kann nicht geschlossen werden + Dokument kann nicht geschlossen werden The document is not closable for the moment. - Das Dokument kann im Moment nicht geschlossen werden. + Das Dokument kann im Moment nicht geschlossen werden. No OpenGL - Kein OpenGL + Kein OpenGL This system does not support OpenGL - Dieses System unterstützt kein OpenGL + Dieses System unterstützt kein OpenGL Help - Hilfe + Hilfe Unable to load documentation. In order to load it Qt 4.4 or higher is required. - Kann Dokumentation nicht laden. + Kann Dokumentation nicht laden. Es wird dazu Qt 4.4 oder höher benötigt. %1 Help - %1 Help + %1 Help Exporting PDF... - Exportiert als PDF... + Exportiert als PDF... Wrong selection - Falsche Auswahl + Falsche Auswahl Only one object selected. Please select two objects. Be aware the point where you click matters. - Nur ein Objekt ausgewählt. Bitte wählen Sie zwei Objekte aus. + Nur ein Objekt ausgewählt. Bitte wählen Sie zwei Objekte aus. Beachten Sie, dass es auf den Punkt ankommt, auf den Sie klicken. Please select two objects. Be aware the point where you click matters. - Bitte wählen Sie zwei Objekte aus. + Bitte wählen Sie zwei Objekte aus. Beachten Sie, dass es auf den Punkt ankommt, auf den Sie klicken. New boolean item - Neuer Bool'scher Wert + Neuer Bool'scher Wert Navigation styles - Navigationsstile + Navigationsstile %1 navigation - %1 Navigation + %1 Navigation Move annotation - Beschriftung verschieben + Beschriftung verschieben Transform - Transformieren + Transformieren The document is in editing mode and thus cannot be closed for the moment. You either have to finish or cancel the editing in the task panel. - Das Dokument ist im Bearbeitungsmodus und kann momentan deshalb nicht geschlossen werden. + Das Dokument ist im Bearbeitungsmodus und kann momentan deshalb nicht geschlossen werden. Sie müssen entweder den Bearbeitungsvorgang fertigstellen oder mittels des Aufgabenfensters abbrechen. Do you want to close this dialog? - Möchten Sie dieses Dialogfeld schließen? + Möchten Sie dieses Dialogfeld schließen? Do you want to save your changes to document '%1' before closing? - + Möchten Sie Ihre Änderungen an dem Dokument '%1' vor dem Schließen speichern? If you don't save, your changes will be lost. - + Wenn Sie nicht speichern, gehen Ihre Änderungen verloren. StdBoxSelection Standard-View - Standardansicht + Standardansicht Box selection - Recktecksauswahl + Recktecksauswahl StdCmdAbout Help - Hilfe + Hilfe &About %1 - &Über %1 + &Über %1 About %1 - Über %1 + Über %1 StdCmdAboutQt Help - Hilfe + Hilfe About &Qt - Über &Qt + Über &Qt About Qt - Über Qt + Über Qt StdCmdActivateNextWindow Window - Fenster + Fenster Ne&xt - Nächs&tes Fenster + Nächs&tes Fenster Activate next window - Nächstes Fenster aktivieren + Nächstes Fenster aktivieren StdCmdActivatePrevWindow Window - Fenster + Fenster Pre&vious - &Vorheriges Fenster + &Vorheriges Fenster Activate previous window - Vorheriges Fenster aktivieren + Vorheriges Fenster aktivieren StdCmdAlignment Edit - Bearbeiten + Bearbeiten Alignment... - Ausrichtung... + Ausrichtung... Align the selected objects - Die ausgewählten Objekte ausrichten + Die ausgewählten Objekte ausrichten StdCmdArrangeIcons Window - Fenster + Fenster Arrange &Icons - &Symbole anordnen + &Symbole anordnen Arrange Icons - Symbole anordnen + Symbole anordnen StdCmdAxisCross Standard-View - Standardansicht + Standardansicht Toggle axis cross - Achsenkreuz ein/ausblenden + Achsenkreuz ein/ausblenden StdCmdCascadeWindows Window - Fenster + Fenster &Cascade - Ü&berlappend anordnen + Ü&berlappend anordnen Tile pragmatic - Überlappend anordnen + Überlappend anordnen StdCmdCloseActiveWindow Window - Fenster + Fenster Cl&ose - Schl&ießen + Schl&ießen Close active window - Aktives Fenster schließen + Aktives Fenster schließen StdCmdCloseAllWindows Window - Fenster + Fenster Close Al&l - Alles sch&ließen + Alles sch&ließen Close all windows - Alle Fenster schließen + Alle Fenster schließen StdCmdCommandLine Tools - Werkzeuge + Werkzeuge Start command &line... - Kommandozei&le... + Kommandozei&le... Opens the command line in the console - In Kommandozeile springen + In Kommandozeile springen StdCmdCopy Edit - Bearbeiten + Bearbeiten C&opy - &Kopieren + &Kopieren Copy operation - Kopieren + Kopieren StdCmdCut Edit - Bearbeiten + Bearbeiten &Cut - &Ausschneiden + &Ausschneiden Cut out - Ausschneiden + Ausschneiden StdCmdDelete Edit - Bearbeiten + Bearbeiten &Delete - &Löschen + &Löschen Deletes the selected objects - Löscht die ausgewählten Objekte + Löscht die ausgewählten Objekte StdCmdDemoMode Standard-View - Standardansicht + Standardansicht View turntable... - Drehscheibe... + Drehscheibe... View turntable - Drehscheibe + Drehscheibe StdCmdDlgCustomize Tools - Werkzeuge + Werkzeuge Cu&stomize... - &Benutzerdefiniert... + &Benutzerdefiniert... Customize toolbars and command bars - Benutzerdefinierte Einstellungen für Symbolleisten und Befehlsleisten + Benutzerdefinierte Einstellungen für Symbolleisten und Befehlsleisten StdCmdDlgMacroExecute Macros ... - Makros... + Makros... Opens a dialog to let you execute a recorded macro - Öffnet Dialog zum Ausführen eines gespeichrten Makros + Öffnet Dialog zum Ausführen eines gespeichrten Makros Macro - Makro + Makro StdCmdDlgMacroExecuteDirect Macro - Makro + Makro Execute macro - Makro ausführen + Makro ausführen Execute the macro in the editor - Führe das Makro im Editor aus + Führe das Makro im Editor aus StdCmdDlgMacroRecord &Macro recording ... - &Makro aufzeichnen... + &Makro aufzeichnen... Opens a dialog to record a macro - Öffnet einen Dialog zur Makroaufzeichnung + Öffnet einen Dialog zur Makroaufzeichnung Macro - Makro + Makro StdCmdDlgParameter Tools - Werkzeuge + Werkzeuge E&dit parameters ... - P&arameter bearbeiten... + P&arameter bearbeiten... Opens a Dialog to edit the parameters - Öffnet Dialog zum Ändern der Parameter + Öffnet Dialog zum Ändern der Parameter StdCmdDlgPreferences Tools - Werkzeuge + Werkzeuge &Preferences ... - &Einstellungen... + &Einstellungen... Opens a Dialog to edit the preferences - Öffnet Dialog zum Ändern der Benutzereinstellungen + Öffnet Dialog zum Ändern der Benutzereinstellungen StdCmdDockViewMenu View - Ansicht + Ansicht Vie&ws - An&sichten + An&sichten Toggles this window - Fenster ein/ausblenden + Fenster ein/ausblenden StdCmdDrawStyle Standard-View - Standardansicht + Standardansicht Draw style - Zeichenstil + Zeichenstil StdCmdDuplicateSelection Edit - Bearbeiten + Bearbeiten Duplicate selection - Auswahl duplizieren + Auswahl duplizieren Put duplicates of the selected objects to the active document - Duplikate der selektierten Objekte in aktives Dokument einfügen + Duplikate der selektierten Objekte in aktives Dokument einfügen StdCmdEdit Edit - Bearbeiten + Bearbeiten Toggle &Edit mode - Bearbeitungsmodus umschalten + Bearbeitungsmodus umschalten Toggles the selected object's edit mode - Schaltet den Bearbeitungsmodus des ausgewählten Objekts um + Schaltet den Bearbeitungsmodus des ausgewählten Objekts um Enters or leaves the selected object's edit mode - Beginnt oder verlässt den Bearbeiten-Modus der ausgewählten Objekte + Beginnt oder verlässt den Bearbeiten-Modus der ausgewählten Objekte StdCmdExport File - Datei + Datei &Export... - &Exportieren... + &Exportieren... Export an object in the active document - Objekt im aktiven Dokument exportieren + Objekt im aktiven Dokument exportieren No selection - Keine Auswahl + Keine Auswahl Please select first the objects you want to export. - Bitte das erste, zu exportierende, Objekt auswählen. + Bitte das erste, zu exportierende, Objekt auswählen. StdCmdExportGraphviz Tools - Werkzeuge + Werkzeuge Dependency graph... - Abhängigkeitsgraph... + Abhängigkeitsgraph... Show the dependency graph of the objects in the active document - Zeige Abhängigkeitsgraph der Objekte im aktiven Dokument + Zeige Abhängigkeitsgraph der Objekte im aktiven Dokument StdCmdFeatRecompute File - Datei + Datei &Recompute - Neu &berechenen + Neu &berechnen Recompute feature or document - Feature oder Dokument neu berechnen + Feature oder Dokument neu berechnen @@ -5260,15 +5024,15 @@ Sie müssen entweder den Bearbeitungsvorgang fertigstellen oder mittels des Aufg FreeCAD FAQ - + FreeCAD FAQ Frequently Asked Questions on the FreeCAD website - + Häufig gestellte Fragen auf der FreeCAD-Webseite Frequently Asked Questions - + Häufig gestellte Fragen @@ -5279,15 +5043,15 @@ Sie müssen entweder den Bearbeitungsvorgang fertigstellen oder mittels des Aufg FreeCAD Forum - + FreeCAD Forum The FreeCAD forum, where you can find help from other users - + Das FreeCAD-Forum, wo Sie Hilfe von anderen Nutzern bekommen The FreeCAD Forum - + Das FreeCAD Forum @@ -5298,15 +5062,15 @@ Sie müssen entweder den Bearbeitungsvorgang fertigstellen oder mittels des Aufg Python scripting documentation - + Python Scripting Dokumentation Python scripting documentation on the FreeCAD website - + Python Scripting Dokumentation auf der FreeCAD Website PowerUsers documentation - + PowerUser Dokumentation @@ -5317,109 +5081,109 @@ Sie müssen entweder den Bearbeitungsvorgang fertigstellen oder mittels des Aufg Users documentation - + Benutzerdokumentation Documentation for users on the FreeCAD website - + Benutzer Dokumentation auf der FreeCAD Website StdCmdFreeCADWebsite Help - Hilfe + Hilfe FreeCAD Website - FreeCAD Webseite + FreeCAD Webseite The FreeCAD website - Die FreeCAD Webseite + Die FreeCAD Webseite StdCmdFreezeViews Standard-View - Standardansicht + Standardansicht Freeze display - Ansicht einfrieren + Ansicht einfrieren Freezes the current view position - Aktuelle Ansicht einfrieren + Aktuelle Ansicht einfrieren StdCmdHideObjects Standard-View - Standardansicht + Standardansicht Hide all objects - Alle Objekte ausblenden + Alle Objekte ausblenden Hide all objects in the document - Alle Objekte im Dokument ausblenden + Alle Objekte im Dokument ausblenden StdCmdHideSelection Standard-View - Standardansicht + Standardansicht Hide selection - Auswahl ausblenden + Auswahl ausblenden Hide all selected objects - Alle ausgewählten Objekte ausblenden + Alle ausgewählten Objekte ausblenden StdCmdImport File - Datei + Datei &Import... - &Importieren... + &Importieren... Import a file in the active document - Datei in das aktive Dokument importieren + Datei in das aktive Dokument importieren Supported formats - Unterstützte Formate + Unterstützte Formate All files (*.*) - Alle Dateien (*.*) + Alle Dateien (*.*) StdCmdMacroStartDebug Macro - Makro + Makro Debug macro - Makro debuggen + Makro debuggen Start debugging of macro - Starte das Makro Debugging + Starte das Makro Debugging @@ -5430,679 +5194,679 @@ Sie müssen entweder den Bearbeitungsvorgang fertigstellen oder mittels des Aufg Step into - + Treten Sie ein StdCmdMacroStepOver Macro - Makro + Makro Step over - Einen Schritt weiter + Einen Schritt weiter StdCmdMacroStopDebug Macro - Makro + Makro Stop debugging - Debuggen stoppen + Debuggen stoppen Stop debugging of macro - Makro-Debuggen stoppen + Makro-Debuggen stoppen StdCmdMacroStopRecord Macro - Makro + Makro S&top macro recording - Ma&kroaufzeichnung beenden + Ma&kroaufzeichnung beenden Stop the macro recording session - Makroaufzeichnung beenden + Makroaufzeichnung beenden StdCmdMeasureDistance View - Ansicht + Ansicht Measure distance - Abstand messen + Abstand messen StdCmdMeasurementSimple Tools - Werkzeuge + Werkzeuge Measures distance between two selected objects - Misst die Distanz zwischen zwei ausgewählten Objekten + Misst die Distanz zwischen zwei ausgewählten Objekten Measure distance - Abstand messen + Abstand messen StdCmdMergeProjects File - Datei + Datei Merge project... - Projekt zusammenführen... + Projekt zusammenführen... Merge project - Projekt zusammenführen + Projekt zusammenführen %1 document (*.fcstd) - %1-Dokument (*.fcstd) + %1-Dokument (*.fcstd) Cannot merge project with itself. - Kann Projekt nicht mit sich selbst zusammenführen. + Kann Projekt nicht mit sich selbst zusammenführen. StdCmdNew File - Datei + Datei &New - &Neu + &Neu Create a new empty document - Neues Dokument erstellen + Neues Dokument erstellen Unnamed - + Unbenannt StdCmdOnlineHelp Help - Hilfe + Hilfe Show help to the application - Hilfe zur Applikation anzeigen + Hilfe zur Applikation anzeigen StdCmdOnlineHelpWebsite Help - Hilfe + Hilfe Help Website - Hilfe-Webseite + Hilfe-Webseite The website where the help is maintained - Die Webseite, wo die Hilfe gepflegt wird + Die Webseite, wo die Hilfe gepflegt wird StdCmdOpen File - Datei + Datei &Open... - &Öffnen... + &Öffnen... Open a document or import files - Öffnen eines Dokuments/Importieren von Dateien + Öffnen eines Dokuments/Importieren von Dateien Supported formats - Unterstützte Formate + Unterstützte Formate All files (*.*) - Alle Dateien (*.*) + Alle Dateien (*.*) Cannot open file - + Kann die Datei nicht öffnen Loading the file %1 is not supported - + Laden der Datei %1 wird nicht unterstützt StdCmdPaste Edit - Bearbeiten + Bearbeiten &Paste - Ein&fügen + Ein&fügen Paste operation - Einfügen + Einfügen StdCmdPlacement Edit - Bearbeiten + Bearbeiten Placement... - Placement... + Placement... Place the selected objects - Platziere die ausgewählten Objekte + Platziere die ausgewählten Objekte StdCmdPrint File - Datei + Datei &Print... - &Drucken... + &Drucken... Print the document - Dokument drucken + Dokument drucken StdCmdPrintPdf File - Datei + Datei &Export PDF... - PDF &exportieren... + PDF &exportieren... Export the document as PDF - Das Dokument als PDF exportieren + Das Dokument als PDF exportieren StdCmdPrintPreview File - Datei + Datei &Print preview... - &Druckvorschau... + &Druckvorschau... Print the document - Dokument drucken + Dokument drucken Print preview - Druckvorschau + Druckvorschau StdCmdProjectInfo File - Datei + Datei Project i&nformation... - Projekti&nformationen... + Projekti&nformationen... Show details of the currently active project - Details des momentan aktiven Projekts anzeigen + Details des momentan aktiven Projekts anzeigen StdCmdProjectUtil Tools - Werkzeuge + Werkzeuge Project utility... - Projekt-Hilfsprogramm... + Projekt-Hilfsprogramm... Utility to extract or create project files - Hilfsprogramm zum Entpacken oder Erstellen von Projektdateien + Hilfsprogramm zum Entpacken oder Erstellen von Projektdateien StdCmdPythonWebsite Help - Hilfe + Hilfe Python Website - Python-Webseite + Python-Webseite The official Python website - Die offizielle Python-Webseite + Die offizielle Python-Webseite StdCmdQuit File - Datei + Datei E&xit - B&eenden + B&eenden Quits the application - Anwendung beenden + Anwendung beenden StdCmdRandomColor File - Datei + Datei Random color - Zufällige Farbe + Zufällige Farbe StdCmdRecentFiles File - Datei + Datei Recent files - Letzte Dateien + Letzte Dateien Recent file list - Zuletzt geöffnete Dateien + Zuletzt geöffnete Dateien StdCmdRedo Edit - Bearbeiten + Bearbeiten &Redo - Wieder&herstellen + Wieder&herstellen Redoes a previously undone action - Zuletzt rückgängig gemachte Aktion wiederherstellen + Zuletzt rückgängig gemachte Aktion wiederherstellen StdCmdRefresh Edit - Bearbeiten + Bearbeiten &Refresh - A&ktualisieren + A&ktualisieren Recomputes the current active document - Aktualisiert das momentan aktive Dokument + Aktualisiert das momentan aktive Dokument StdCmdSave File - Datei + Datei &Save - &Speichern + &Speichern Save the active document - Aktives Dokument speichern + Aktives Dokument speichern StdCmdSaveAs File - Datei + Datei Save &As... - Speichern &unter... + Speichern &unter... Save the active document under a new file name - Aktives Dokument unter anderem Namen speichern + Aktives Dokument unter anderem Namen speichern StdCmdSceneInspector Tools - Werkzeuge + Werkzeuge Scene inspector... - Scene inspector... + Scene inspector... Scene inspector - Szenengraph untersuchen + Szenengraph untersuchen StdCmdSelectAll Edit - Bearbeiten + Bearbeiten Select &All - &Alles auswählen + &Alles auswählen Select all - Alles auswählen + Alles auswählen StdCmdSetAppearance Standard-View - Standardansicht + Standardansicht Appearance... - Darstellung... + Darstellung... Sets the display properties of the selected object - Setzen der Anzeigeeigenschaften des ausgewählten Objektes + Setzen der Anzeigeeigenschaften des ausgewählten Objektes StdCmdShowObjects Standard-View - Standardansicht + Standardansicht Show all objects - Alle Objekte einblenden + Alle Objekte einblenden Show all objects in the document - Alle Objekte im Dokument einblenden + Alle Objekte im Dokument einblenden StdCmdShowSelection Standard-View - Standardansicht + Standardansicht Show selection - Auswahl einblenden + Auswahl einblenden Show all selected objects - Alle ausgewählten Objekte einblenden + Alle ausgewählten Objekte einblenden StdCmdStatusBar View - Ansicht + Ansicht Status bar - Statusleiste + Statusleiste Toggles the status bar - Statuszeile ein/ausblenden + Statuszeile ein/ausblenden StdCmdTextureMapping Tools - Werkzeuge + Werkzeuge Texture mapping... - Texturabbildung... + Texturabbildung... Texture mapping - Texturabbildung + Texturabbildung StdCmdTileWindows Window - Fenster + Fenster &Tile - &Anordnen + &Anordnen Tile the windows - Fenster anordnen + Fenster anordnen StdCmdToggleBreakpoint Macro - Makro + Makro Toggle breakpoint - Haltepunkt an/aus + Haltepunkt an/aus StdCmdToggleClipPlane Standard-View - Standardansicht + Standardansicht Clipping plane - Schnittebene + Schnittebene Toggles clipping plane for active view - Schnittebene für aktive Ansicht ein- und ausblenden + Schnittebene für aktive Ansicht ein- und ausblenden StdCmdToggleNavigation Standard-View - Standardansicht + Standardansicht Toggle navigation/Edit mode - Navigations/Editier-Modus + Navigations/Editier-Modus Toggle between navigation and edit mode - Zwischen Navigations- und Editier-Modus umschalten + Zwischen Navigations- und Editier-Modus umschalten StdCmdToggleObjects Standard-View - Standardansicht + Standardansicht Toggle all objects - Alle Objekte umkehren + Alle Objekte umkehren Toggles visibility of all objects in the active document - Die Sichtbarkeit aller Objekte im aktiven Dokument umkehren + Die Sichtbarkeit aller Objekte im aktiven Dokument umkehren StdCmdToggleSelectability Standard-View - Standardansicht + Standardansicht Toggle selectability - Selektierbarkeit an/aus + Selektierbarkeit an/aus Toggles the property of the objects to get selected in the 3D-View - Schaltet die Eigenschaft der Objekte, in der 3D-Ansicht ausgewählt zu werden um + Schaltet die Eigenschaft der Objekte, in der 3D-Ansicht ausgewählt zu werden um StdCmdToggleVisibility Standard-View - Standardansicht + Standardansicht Toggle visibility - Ein/Ausblenden + Ein/Ausblenden Toggles visibility - Wechselt zwischen Sichtbarkeit und Unsichtbarkeit + Wechselt zwischen Sichtbarkeit und Unsichtbarkeit StdCmdToolBarMenu View - Ansicht + Ansicht Tool&bars - Symbol&leisten + Symbol&leisten Toggles this window - Fenster ein/ausblenden + Fenster ein/ausblenden StdCmdTransform Edit - Bearbeiten + Bearbeiten Transform... - Transformieren... + Transformieren... Transform the geometry of selected objects - Geometrie ausgewählter Objekte transformieren + Geometrie ausgewählter Objekte transformieren StdCmdTransformManip Edit - Bearbeiten + Bearbeiten Transform - Transformieren + Transformieren Transform the selected object in the 3d view - Ausgewähltes Objekt in der 3D-Ansicht transformieren + Ausgewähltes Objekt in der 3D-Ansicht transformieren StdCmdTreeSelection View - Ansicht + Ansicht Go to selection - Gehe zu Selektion + Gehe zu Selektion Scroll to first selected item - Zum ersten selektierten Element rollen + Zum ersten selektierten Element rollen StdCmdUndo Edit - Bearbeiten + Bearbeiten &Undo - &Rückgängig + &Rückgängig Undo exactly one action - Letzte Aktion rückgängig machen + Letzte Aktion rückgängig machen @@ -6113,349 +5877,341 @@ Sie müssen entweder den Bearbeitungsvorgang fertigstellen oder mittels des Aufg &Units calculator... - + &Einheitenrechner... Start the units calculator - + Einheitenrechner starten StdCmdUserInterface View - Ansicht + Ansicht Dock views - Fenster andocken + Fenster andocken Dock all top-level views - Alle Top-Level-Fenster andocken + Alle Top-Level-Fenster andocken StdCmdViewAxo Standard-View - Standardansicht + Standardansicht Axometric - Axometrisch + Axometrisch Set to axometric view - Axometrisch + Axometrisch StdCmdViewBottom Standard-View - Standardansicht + Standardansicht Bottom - Unten + Unten Set to bottom view - Unten + Unten StdCmdViewCreate Standard-View - Standardansicht + Standardansicht Create new view - Neue Ansicht + Neue Ansicht Creates a new view window for the active document - Neue Ansicht für das aktive Dokument erstellen + Neue Ansicht für das aktive Dokument erstellen StdCmdViewExample1 Standard-View - Standardansicht + Standardansicht Inventor example #1 - Inventor Beispiel #1 + Inventor Beispiel #1 Shows a 3D texture with manipulator - Zeigt 3D-Textur mit Manipulator + Zeigt 3D-Textur mit Manipulator StdCmdViewExample2 Standard-View - Standardansicht + Standardansicht Inventor example #2 - Inventor Beispiel #2 + Inventor Beispiel #2 Shows spheres and drag-lights - Kugeln mit verschiebbarer Lichtquelle + Kugeln mit verschiebbarer Lichtquelle StdCmdViewExample3 Standard-View - Standardansicht + Standardansicht Inventor example #3 - Inventor Beispiel #3 + Inventor Beispiel #3 Shows a animated texture - Zeigt animierte Textur + Zeigt animierte Textur StdCmdViewFitAll Standard-View - Standardansicht + Standardansicht Fit all - Einpassen + Einpassen Fits the whole content on the screen - Inhalt auf Bildschirmgröße einpassen + Inhalt auf Bildschirmgröße einpassen StdCmdViewFitSelection Standard-View - Standardansicht + Standardansicht Fit selection - Selektion einpassen + Selektion einpassen Fits the selected content on the screen - Selektierte Objekte auf den Bildschirm einpassen + Selektierte Objekte auf den Bildschirm einpassen StdCmdViewFront Standard-View - Standardansicht + Standardansicht Front - Vorne + Vorne Set to front view - Vorderansicht + Vorderansicht StdCmdViewIvIssueCamPos Standard-View - Standardansicht + Standardansicht Issue camera position - Kameraposition ausgeben + Kameraposition ausgeben Issue the camera position to the console and to a macro, to easily recall this position - Ausgeben der Kameraposition auf die Konsole und in ein Makro, um diese Position einfach wiederherstellen zu können + Ausgeben der Kameraposition auf die Konsole und in ein Makro, um diese Position einfach wiederherstellen zu können StdCmdViewIvStereoInterleavedColumns Standard-View - Standardansicht + Standardansicht Stereo Interleaved Columns - Vertikales Interlacing + Vertikales Interlacing Switch stereo viewing to Interleaved Columns - Wechsle in vertikale Interlacing-Stereo-Ansicht + Wechsle in vertikale Interlacing-Stereo-Ansicht StdCmdViewIvStereoInterleavedRows Standard-View - Standardansicht + Standardansicht Stereo Interleaved Rows - Horizontales Interlacing + Horizontales Interlacing Switch stereo viewing to Interleaved Rows - Wechsle in horizontale Interlacing-Stereo-Ansicht + Wechsle in horizontale Interlacing-Stereo-Ansicht StdCmdViewIvStereoOff Standard-View - Standardansicht + Standardansicht Stereo Off - Stereo aus + Stereo aus Switch stereo viewing off - Schalte Stereo-Ansicht aus + Schalte Stereo-Ansicht aus StdCmdViewIvStereoQuadBuff Standard-View - Standardansicht + Standardansicht Stereo quad buffer - Stereo 4-fach Puffer + Stereo 4-fach Puffer Switch stereo viewing to quad buffer - Wechsle in Stereo-Ansicht mit 4-fach Puffer + Wechsle in Stereo-Ansicht mit 4-fach Puffer StdCmdViewIvStereoRedGreen Standard-View - Standardansicht - - - Stereo red/green - Stereo rot/grün - - - Switch stereo viewing to red/green - Wechsle in Stereo-Rot-Grün-Ansicht + Standardansicht Stereo red/cyan - + Stereo rot/cyan Switch stereo viewing to red/cyan - + Wechseln der Stereo Anzeige zu rot/cyan StdCmdViewLeft Standard-View - Standardansicht + Standardansicht Left - Links + Links Set to left view - Linksansicht + Linksansicht StdCmdViewRear Standard-View - Standardansicht + Standardansicht Rear - Hinten + Hinten Set to rear view - Hinteransicht + Hinteransicht StdCmdViewRight Standard-View - Standardansicht + Standardansicht Right - Rechts + Rechts Set to right view - Rechtsansicht + Rechtsansicht StdCmdViewRotateLeft Standard-View - Standardansicht + Standardansicht Rotate Left - Linksherum rotieren + Linksherum rotieren Rotate the view by 90° counter-clockwise - Ansicht um 90° gegen den Uhrzeigersinn drehen + Ansicht um 90° gegen den Uhrzeigersinn drehen StdCmdViewRotateRight Standard-View - Standardansicht + Standardansicht Rotate Right - Rechtsherum rotieren + Rechtsherum rotieren Rotate the view by 90° clockwise - Ansicht um 90° im Uhrzeigersinn drehen + Ansicht um 90° im Uhrzeigersinn drehen StdCmdViewTop Standard-View - Standardansicht + Standardansicht Top - Oben + Oben Set to top view - Oberansicht + Oberansicht @@ -6466,329 +6222,331 @@ Sie müssen entweder den Bearbeitungsvorgang fertigstellen oder mittels des Aufg FreeCAD-VR - + FreeCAD-VR Extend the FreeCAD 3D Window to a Oculus Rift - + Erweitern Sie das FreeCAD 3D Fenster zu einer Oculus-Rift-Darstellung StdCmdWhatsThis Help - Hilfe + Hilfe &What's This? - Dire&kthilfe + Dire&kthilfe What's This - Direkthilfe + Direkthilfe StdCmdWindows Window - Fenster + Fenster &Windows... - &Fenster... + &Fenster... Windows list - Liste von Fenstern + Liste von Fenstern StdCmdWindowsMenu Window - Fenster + Fenster Activates this window - Schaltet dieses Fenster aktiv + Schaltet dieses Fenster aktiv StdCmdWorkbench View - Ansicht + Ansicht Workbench - Arbeitsbereich + Arbeitsbereich Switch between workbenches - Zwischen Arbeitsbereichen wechseln + Zwischen Arbeitsbereichen wechseln StdOrthographicCamera Standard-View - Standardansicht + Standardansicht Orthographic view - Orthographische Ansicht + Orthographische Ansicht Switches to orthographic view mode - In orthographische Ansicht wechseln + In orthographische Ansicht wechseln StdPerspectiveCamera Standard-View - Standardansicht + Standardansicht Perspective view - Perspektivische Ansicht + Perspektivische Ansicht Switches to perspective view mode - In perspektivische Ansicht wechseln + In perspektivische Ansicht wechseln StdViewBoxZoom Standard-View - Standardansicht + Standardansicht Box zoom - Zoomen mit Rechteck + Zoomen mit Rechteck StdViewDockUndockFullscreen Standard-View - Standardansicht + Standardansicht Document window - Dokumentfenster + Dokumentfenster Display the active view either in fullscreen, in undocked or docked mode - Aktives Fenster im Vollbild-Modus, im abgedockten oder angedockten Modus anzeigen + Aktives Fenster im Vollbild-Modus, im abgedockten oder angedockten Modus anzeigen StdViewScreenShot Standard-View - Standardansicht + Standardansicht Save picture... - Bildinhalt speichern... + Bildinhalt speichern... Creates a screenshot of the active view - Erzeugt einen Schnappschuss der aktiven Ansicht + Erzeugt einen Schnappschuss der aktiven Ansicht StdViewZoomIn Standard-View - Standardansicht + Standardansicht Zoom In - Vergrößern + Vergrößern StdViewZoomOut Standard-View - Standardansicht + Standardansicht Zoom Out - Verkleinern + Verkleinern Std_Delete Object dependencies - + Objektabhängigkeiten This object is referenced by other objects and thus these objects might get broken. Are you sure to continue? - + Dieses Objekt wird von anderen Objekten referenziert, welche dadurch beschädigt werden können. +Möchten sie trotzdem fortfahren? Std_DrawStyle As is - Original + Original Normal mode - Normalmodus + Normalmodus Wireframe - Drahtgitter + Drahtgitter Wireframe mode - Drahtgitter-Modus + Drahtgitter-Modus Flat lines - + Flache Linien Flat lines mode - + Flachlinienmodus Shaded - + Schattiert Shaded mode - + Schattenmodus Points - + Punkte Points mode - + Punktemodus Std_DuplicateSelection Object dependencies - + Objektabhängigkeiten The selected objects have a dependency to unselected objects. Do you want to duplicate them, too? - + Die ausgewählten Objekte enthalten eine Abhängigkeit zu nicht gewählten Objekten. +Möchten sie diese ebenfalls kopieren? Std_ExportGraphviz Graphviz not found - Graphviz nicht gefunden + Graphviz nicht gefunden Graphviz couldn't be found on your system. Do you want to specify its installation path if it's already installed? - Graphviz konnte nicht auf Ihrem System gefunden werden. Möchten Sie den Installationspfad angeben, wenn es bereits installiert ist? + Graphviz konnte nicht auf Ihrem System gefunden werden. Möchten Sie den Installationspfad angeben, wenn es bereits installiert ist? Graphviz installation path - Graphviz-Installationspfad + Graphviz-Installationspfad Dependency graph - Abhängigkeitsgraph + Abhängigkeitsgraph Graphviz failed - Graphviz ist fehlgeschlagen + Graphviz ist fehlgeschlagen Graphviz failed to create an image file - Graphviz konnte keine Bild-Datei erstellen + Graphviz konnte keine Bild-Datei erstellen Workbench &File - &Datei + &Datei &Edit - &Bearbeiten + &Bearbeiten Standard views - Standardansichten + Standardansichten &Stereo - &Stereo + &Stereo &Zoom - &Zoom + &Zoom Visibility - Sichtbarkeit + Sichtbarkeit &View - &Ansicht + &Ansicht &Tools - &Werkzeuge + &Werkzeuge &Macro - &Makro + &Makro &Windows - &Fenster + &Fenster &On-line help - &Online-Hilfe + &Online-Hilfe &Help - &Hilfe + &Hilfe File - Datei + Datei Macro - Makro + Makro View - Ansicht + Ansicht Special Ops - Spezialfunktionen + Spezialfunktionen testClass test - test + test <html><head><meta name="qrichtext" content="1" /><style type="text/css"> @@ -6799,7 +6557,7 @@ p, li { white-space: pre-wrap; } <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:20pt; font-weight:600;"><span style=" font-size:12pt;">Created for Qt 4.3.x</span></p> <p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:12pt; font-weight:600;"></p> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:12pt; font-weight:600;">www.ii-system.com</p></body></html> - <html><head><meta name="qrichtext" content="1" /><style type="text/css"> + <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;"> <p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-size:20pt; font-weight:600;">iisTaskPanel</span></p> @@ -6810,15 +6568,15 @@ p, li { white-space: pre-wrap; } Choose the style of the Task Panel - Wählen Sie den Stil des Aufgabenfeldes + Wählen Sie den Stil des Aufgabenfeldes Default - Standard + Standard Windows XP - Windows XP + Windows XP diff --git a/src/Gui/Language/FreeCAD_es-ES.qm b/src/Gui/Language/FreeCAD_es-ES.qm index 7259965e09..bd8a094599 100644 Binary files a/src/Gui/Language/FreeCAD_es-ES.qm and b/src/Gui/Language/FreeCAD_es-ES.qm differ diff --git a/src/Gui/Language/FreeCAD_es-ES.ts b/src/Gui/Language/FreeCAD_es-ES.ts index 62a55ee16b..3cbd37fb90 100644 --- a/src/Gui/Language/FreeCAD_es-ES.ts +++ b/src/Gui/Language/FreeCAD_es-ES.ts @@ -312,7 +312,7 @@ while doing a left or right click and move the mouse up or down Word size - Word size + Tamaño de palabra @@ -330,11 +330,11 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::Clipping Clipping - Clipping + Recorte Clipping X - Clipping X + Recorte X Flip @@ -346,15 +346,15 @@ while doing a left or right click and move the mouse up or down Clipping Y - Clipping Y + Recorte Y Clipping Z - Clipping Z + Recorte Z Clipping custom direction - Clipping custom direction + Dirección personalizada de recorte View @@ -362,7 +362,7 @@ while doing a left or right click and move the mouse up or down Adjust to view direction - Adjust to view direction + Ajuste a la dirección de la vista Direction @@ -473,11 +473,11 @@ while doing a left or right click and move the mouse up or down Site: - Site: + Sitio web: %1 at %2 - %1 at %2 + %1 en %2 @@ -486,13 +486,9 @@ while doing a left or right click and move the mouse up or down Choose Icon Seleccionar icono - - Add icons... - Añadir iconos... - Icon folders... - + Carpetas de icono... @@ -943,87 +939,87 @@ Por favor defina otro atajo de teclado. Aluminium - + Aluminio Brass - + Latón Bronze - + Bronce Copper - + Cobre Chrome - + Cromo Emerald - + Esmeralda Gold - + Oro Jade - + Jade Metalized - + Metalizado Neon GNC - + Neon GNC Neon PHC - + Neon PHC Obsidian - + Obsidiana Pewter - + Estaño Plaster - + Yeso Plastic - + Plástico Ruby - + Rubí Satin - + Satén Shiny plastic - + Plástico brillante Silver - + Plata Steel - + Acero Stone - + Piedra @@ -1133,11 +1129,11 @@ Por favor defina otro atajo de teclado. Enable tiled background - Enable tiled background + Habilitar fondo en mosaico Style sheet: - Style sheet: + Hoja de estilo: @@ -1160,7 +1156,7 @@ Por favor defina otro atajo de teclado. No style sheet - No style sheet + Ninguna hoja de estilo @@ -1316,7 +1312,7 @@ Este archivo ya existe. You have no write permission for the directory. Please, choose another one. - You have no write permission for the directory. Please, choose another one. + No tiene ningún permiso de escritura para el directorio. Por favor, seleccione otro. @@ -1600,13 +1596,9 @@ Especifique otro directorio, por favor. No selection Ninguna selección - - Please select an object of the list - Por favor, selecciona un objeto de la lista - Please select an object from the list - + Por favor, selecciona un objeto de la lista @@ -1981,75 +1973,75 @@ Especifique otro directorio, por favor. Authoring and License - + Autoría y licencia Author name - + Nombre del autor <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> - + <html><head/> <body><p>El nombre a usar en la creación de documento.</p><p>En blanco para mantener anónimo.</p><p>También puede utilizar el formulario:</p><p>John Doe &lt; john@doe.com &gt;</p></body></html> If this is checked, the "Last modified by" field will be set when saving the file - + Si ésto está activado, el campo "Última modificación por" se establecerá al guardar el fichero Set on save - + Establecer al guardar Company - + Organización Default license - + Licencia por defecto The default license for new documents - + La licencia por defecto para nuevos documentos All rights reserved - + Todos los derechos reservados CreativeCommons Attribution - + Creative Commons Reconocimiento CreativeCommons Attribution-ShareAlike - + Creative Commons Reconocimiento - CompartirIgual CreativeCommons Attribution-NoDerivatives - + Creative Commons Reconocimiento - SinObraDerivada CreativeCommons Attribution-NonCommercial - + Creative Commons Reconocimiento - NoComercial CreativeCommons Attribution-NonCommercial-ShareAlike - + Creative Commons Reconocimiento - NoComercial - CompartirIgual CreativeCommons Attribution-NonCommercial-NoDerivatives - + Creative Commons Reconocimiento - NoComercial - SinObraDerivada Public Domain - + Dominio público FreeArt - + FreeArt Other - + Otros License URL @@ -2057,15 +2049,15 @@ Especifique otro directorio, por favor. An URL where the user can find more details about the license - + Una dirección URL donde el usuario puede encontrar más detalles acerca de la licencia http://en.wikipedia.org/wiki/All_rights_reserved - + http://es.wikipedia.org/wiki/Todos_los_derechos_reservados The default company to use for new files - + La compañía por defecto a usar para nuevos archivos @@ -2161,10 +2153,6 @@ Especifique otro directorio, por favor. Black Negro - - Transparent - Transparente - Image dimensions Dimensiones de imagen @@ -2510,7 +2498,7 @@ Especifique otro directorio, por favor. Gui::Dialog::DlgUnitsCalculator Unit mismatch - Unit mismatch + Unidad incompatible @@ -2560,7 +2548,7 @@ Especifique otro directorio, por favor. %1 at %2 - %1 at %2 + %1 en %2 @@ -2579,7 +2567,7 @@ Especifique otro directorio, por favor. Error opening save file: %1 - Error opening save file: %1 + Error al abrir archivo guardado: %1 Error saving: %1 @@ -2655,32 +2643,28 @@ Especifique otro directorio, por favor. Gui::Dialog::IconDialog - - Add icon - Agregar icono - Icon folders - + Carpetas de icono Add icon folder - + Añadir icono de la carpeta Gui::Dialog::IconFolders Add or remove custom icon folders - + Agregar o eliminar carpetas de icono personalizado Remove folder - + Eliminar carpeta Removing a folder only takes effect after an application restart. - + La acción de eliminar carpeta se hará efectiva al reiniciar la aplicación. @@ -2934,11 +2918,11 @@ Especifique otro directorio, por favor. Incorrect quantity - + Cantidad incorrecta There are input fields with incorrect input, please ensure valid placement values! - + Algunos campos contienen datos incorrectos, asegúrese de introducirlos en el lugar apropiado. @@ -3178,39 +3162,39 @@ Especifique otro directorio, por favor. Search - + Búsqueda Searches object labels - + Busca etiquetas de objetos Clears the search field - + Limpia el campo de búsqueda Select only - + Seleccione sólo Selects only this object - + Selecciona sólo este objeto Deselect - + Deseleccionar Deselects this object - + Anula la selección de este objeto Zoom fit - + Ampliar ajuste Selects and fits this object in the 3D window - + Selecciona y ajusta éste objeto en la ventana 3D Go to selection @@ -3218,7 +3202,7 @@ Especifique otro directorio, por favor. Selects and locates this object in the tree view - + Selecciona y localiza éste objeto en la vista de árbol @@ -3472,7 +3456,7 @@ Desea guardar los cambios? Gui::LabelEditor List - + Lista @@ -3644,7 +3628,7 @@ How do you want to proceed? No point was found on model - No point was found on model + Ningún punto se encontró en el modelo @@ -3668,7 +3652,7 @@ How do you want to proceed? Clear list - + Limpiar lista @@ -3922,7 +3906,7 @@ Desea especificar otro directorio? Automatic python modules documentation - Automatic python modules documentation + Documentación de módulos python automático Opens a browser to show the Python modules documentation @@ -4188,7 +4172,7 @@ Desea especificar otro directorio? Input in line %1 is not a number - + La linea de entrada %1 no es un número @@ -4430,10 +4414,6 @@ Desea continuar? Unsaved document Documento sin guardar - - Save document before close? - Guardar documento antes de cerrar? - Save Macro Guardar macro @@ -4590,11 +4570,11 @@ Tienes que finzalizar o cancelar la edición en el panel de tareas. Do you want to save your changes to document '%1' before closing? - + ¿Desea guardar el documento '%1' antes de cerrar? If you don't save, your changes will be lost. - + De no guardar, se perderán los cambios. @@ -5210,7 +5190,7 @@ Tienes que finzalizar o cancelar la edición en el panel de tareas. Step into - Step into + Entrar @@ -5372,11 +5352,11 @@ Tienes que finzalizar o cancelar la edición en el panel de tareas. Cannot open file - + No se puede abrir el archivo Loading the file %1 is not supported - + No está soportada la carga del archivo %1 @@ -6131,21 +6111,13 @@ Tienes que finzalizar o cancelar la edición en el panel de tareas.Standard-View Vista estándar - - Stereo red/green - Estéreo rojo/verde - - - Switch stereo viewing to red/green - Cambiar la visualización estéreo a rojo/verde - Stereo red/cyan - + Estéreo rojo/cian Switch stereo viewing to red/cyan - + Cambiar a visualización estéreo rojo/cian @@ -6246,11 +6218,11 @@ Tienes que finzalizar o cancelar la edición en el panel de tareas. FreeCAD-VR - + FreeCAD-VR Extend the FreeCAD 3D Window to a Oculus Rift - + Extender la vista 3D a Oculus Rift diff --git a/src/Gui/Language/FreeCAD_fi.qm b/src/Gui/Language/FreeCAD_fi.qm index e25b5b22b1..7eb979af1a 100644 Binary files a/src/Gui/Language/FreeCAD_fi.qm and b/src/Gui/Language/FreeCAD_fi.qm differ diff --git a/src/Gui/Language/FreeCAD_fi.ts b/src/Gui/Language/FreeCAD_fi.ts index 8059837181..ade577015f 100644 --- a/src/Gui/Language/FreeCAD_fi.ts +++ b/src/Gui/Language/FreeCAD_fi.ts @@ -21,7 +21,7 @@ Angle Snap - Automaattinen kulmaan kohdistus + Kulman kohdistus 1 ° @@ -60,22 +60,22 @@ CmdViewMeasureClearAll Measure - Measure + Mittaa Clear measurement - Clear measurement + Nollaa mittaus CmdViewMeasureToggleAll Measure - Measure + Mittaa Toggle measurement - Toggle measurement + Vaihda mittaus @@ -114,7 +114,7 @@ Enable - Päälle + Käytä Reverse @@ -125,11 +125,11 @@ DlgUnitCalculator Units calculator - Units calculator + Yksikkölaskuri as: - as: + kuten: => @@ -160,7 +160,7 @@ Filename - Filename + Tiedostonimi @@ -201,7 +201,7 @@ Gui::AlignmentView Movable object - Siirretävä objekti + Siirrettävä objekti Fixed object @@ -239,13 +239,12 @@ Press middle and left or right mouse button - Press middle and left or right mouse button + Paina keski- ja vasenta tai oikeata hiiren painiketta Scroll middle mouse button or keep middle button pressed while doing a left or right click and move the mouse up or down - Scroll middle mouse button or keep middle button pressed -while doing a left or right click and move the mouse up or down + Vieritä hiiren keskipainiketta tai pidä keskimmäistä painiketta painettuna kun painat vasenta tai oikeata hiiren nappia ja liikutat samalla hiirtä ylös tai alas @@ -313,7 +312,7 @@ while doing a left or right click and move the mouse up or down Word size - Word size + Sanakoko @@ -331,15 +330,15 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::Clipping Clipping - Clipping + Leikkaaminen Clipping X - Clipping X + Leikataan X Flip - Flip + Käännä Offset @@ -347,15 +346,15 @@ while doing a left or right click and move the mouse up or down Clipping Y - Clipping Y + Leikataan Y Clipping Z - Clipping Z + Leikataan Z Clipping custom direction - Clipping custom direction + Leikataan mukautettuun suuntaan View @@ -363,7 +362,7 @@ while doing a left or right click and move the mouse up or down Adjust to view direction - Adjust to view direction + Säädä näytön suuntaan Direction @@ -470,15 +469,15 @@ while doing a left or right click and move the mouse up or down Username: - Username: + Käyttäjanimi: Site: - Site: + Sivusto: %1 at %2 - %1 at %2 + %1 on %2:ssa @@ -487,13 +486,9 @@ while doing a left or right click and move the mouse up or down Choose Icon Valitse kuvake - - Add icons... - Lisää kuvakkeet... - Icon folders... - + Kuvake kansiot... @@ -504,7 +499,7 @@ while doing a left or right click and move the mouse up or down Setup Custom Macros - Asennuksen mukautetut makrot + Luo mukautetut makrot Macro: @@ -591,7 +586,7 @@ while doing a left or right click and move the mouse up or down Please specify the menu text first. - Ole hyvä ja määritä valikon teksti. + Ole hyvä ja määritä valikon teksti ensin. No item selected @@ -599,7 +594,7 @@ while doing a left or right click and move the mouse up or down Please select a macro item first. - Ole hyvä ja valitse makro kohde. + Ole hyvä ja valitse makro kohde ensin. @@ -644,7 +639,7 @@ while doing a left or right click and move the mouse up or down C&ommands: - &Komennot: + K&omennot: Current shortcut: @@ -676,7 +671,7 @@ while doing a left or right click and move the mouse up or down Re&set All - Nollaa Kaikki + Nollaa kaikki Alt+S @@ -717,7 +712,9 @@ while doing a left or right click and move the mouse up or down The shortcut '%1' is already assigned to '%2'. Please define another shortcut. - Jo aikaisemmin määritelty pikakuvake + Pikakuvake "%1" on jo liitetty "%2". + +Määritä toinen pikakuvake. @@ -845,14 +842,14 @@ Please define another shortcut. No Spaceball Present - "Spaceball:ia" ei ole paikallistettu + "Spaceball" ei ole käytössä Gui::Dialog::DlgCustomizeSpaceball No Spaceball Present - "Spaceball:ia" ei ole paikallistettu + "Spaceball" ei ole käytössä Buttons @@ -942,87 +939,87 @@ Please define another shortcut. Aluminium - + Alumiini Brass - + Messinki Bronze - + Pronssi Copper - + Kupari Chrome - + Kromi Emerald - + Smaragdi Gold - + Kulta Jade - + Jade Metalized - + Metallisoitu Neon GNC - + Neon GNC Neon PHC - + Neon PHC Obsidian - + Obsidiaani Pewter - + Kovatina Plaster - + Kipsi Plastic - + Muovi Ruby - + Rubiini Satin - + Satiini Shiny plastic - + Kiiltävä muovi Silver - + Hopea Steel - + Teräs Stone - + Kivi @@ -1057,7 +1054,7 @@ Please define another shortcut. Indent size: - Sisennä koko: + Sisennyksen koko: Keep tabs @@ -1092,7 +1089,7 @@ Please define another shortcut. Start up - käynnistys + Käynnistys Enable splash screen at start up @@ -1120,7 +1117,7 @@ Please define another shortcut. Size of recent file list - Viimeksi käytettyjen tiedostojen listauksen pituus + Viimeisimpien tiedostojen listauksen pituus Window style: @@ -1132,34 +1129,34 @@ Please define another shortcut. Enable tiled background - Enable tiled background + Valitse tiilikuvio tausta Style sheet: - Style sheet: + Tyylisivu: Gui::Dialog::DlgGeneralImp Default (%1 x %1) - Oletus(%1x%1) + Oletus (%1 x %1) Small (%1 x %1) - Pieni(%1x%1) + Pieni (%1 x %1) Large (%1 x %1) - Suuri(%1x%1) + Suuri (%1 x %1) Extra large (%1 x %1) - Erittäin suuri(%1x%1) + Erittäin suuri (%1 x %1) No style sheet - No style sheet + Ei tyylimallia @@ -1236,7 +1233,8 @@ Please define another shortcut. '%1'. This file already exists. - "%1". Tämä tiedosto on jo olemassa. + "%1". +Tämä tiedosto on jo olemassa. Delete macro @@ -1244,7 +1242,7 @@ This file already exists. Do you really want to delete the macro '%1'? - Haluatko varmasti poistaa makron "%1"? + Haluatko varmasti poistaa makron '%1'? Cannot create file @@ -1283,7 +1281,7 @@ This file already exists. Record - Tietue + Tallennus @@ -1302,7 +1300,7 @@ This file already exists. The macro '%1' already exists. Do you want to overwrite? - Makro '%1' on jo olemassa. Haluatko korvata? + Makro '%1' on jo olemassa. Haluatko korvata sen? The macro directory doesn't exist. Please, choose another one. @@ -1314,14 +1312,14 @@ This file already exists. You have no write permission for the directory. Please, choose another one. - You have no write permission for the directory. Please, choose another one. + Sinulla ei ole käyttöoikeuksia kirjoittaa kansioon. Valitse toinen kansio. Gui::Dialog::DlgMaterialProperties Material properties - Materiaaliominaisuudet + Materiaalin ominaisuudet Material @@ -1360,7 +1358,7 @@ This file already exists. Gui::Dialog::DlgOnlineHelp On-line help - Käytönaikainen ohje + Internetistä saatava apu Help viewer @@ -1379,13 +1377,15 @@ This file already exists. Access denied - Pääsy evätty + Pääsy estetty Access denied to '%1' Specify another directory, please. - Pääsy evätty "%1" Määritä toinen hakemisto, ole hyvä. + Pääsy estetty '%1':een. + +Määritä toinen hakemisto, ole hyvä. @@ -1435,7 +1435,7 @@ Specify another directory, please. Invalid key name '%1' - Virheellinen avaimen nimi "%1" + Virheellinen avaimen nimi '%1' System parameter @@ -1496,7 +1496,7 @@ Specify another directory, please. Last &modification date: - Viime&muutosten päivämäärä: + Viime &muutosten päivämäärä: Creation &date: @@ -1512,15 +1512,15 @@ Specify another directory, please. License information: - License information: + Lisenssitiedot: License URL - License URL + Lisenssi URL Open in browser - Open in browser + Avaa selaimessa @@ -1531,7 +1531,7 @@ Specify another directory, please. Extract project - Lisäprojekti + Pura projekti Source @@ -1547,7 +1547,7 @@ Specify another directory, please. Extract - Ote + Pura Create project @@ -1586,23 +1586,19 @@ Specify another directory, please. Gui::Dialog::DlgPropertyLink Link - Link + Linkki Show all object types - Show all object types + Näytä kaikki kohdetyypit No selection Ei valintaa - - Please select an object of the list - Please select an object of the list - Please select an object from the list - + Valitse kohde luettelosta @@ -1657,7 +1653,7 @@ Specify another directory, please. Redirect internal Python output to report view - Uudelleenohjaa Pythonin sisäiset tulosteet raportointinäkymään + Uudelleenohjaa sisäiset Pythonin tulosteet raportointinäkymään @@ -1668,7 +1664,7 @@ Specify another directory, please. TextLabel - TextLabel + TekstiSelite Advanced >> @@ -1783,7 +1779,7 @@ Specify another directory, please. Anti-Aliasing - Anti-Aliasing + sahalaitaisuuden poisto None @@ -1791,7 +1787,7 @@ Specify another directory, please. Line Smoothing - Line Smoothing + Rivin tasoitus MSAA 2x @@ -1853,7 +1849,7 @@ Specify another directory, please. Out &invisible - Ulos&näkymätön + Ulos &näkymätön Alt+I @@ -1873,7 +1869,7 @@ Specify another directory, please. &Flow - &Virtaukset + &Virtaus Alt+F @@ -1893,7 +1889,7 @@ Specify another directory, please. &Labels: - &Otsikot: + &Selitteet: &Decimals: @@ -1964,103 +1960,103 @@ Specify another directory, please. Allow duplicate object labels in one document - Salli samoja objektien nimiä asiakirjassa + Salli monistettuja objektien nimilappuja asiakirjassa Maximum Undo/Redo steps - Suurin sallittu "Pura"/"Tee uudelleen" askelten määrä + Suurin sallittu "Peruuta"/"Tee uudelleen" askelten määrä Using Undo/Redo on documents - "Pura"/"Tee uudelleen" komentojen käyttö asiakirjoissa + "Peruuta"/"Tee uudelleen" komentojen käyttö asiakirjoissa Authoring and License - + Kirjoittaminen ja lisenssi Author name - + Tekijän nimi <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> - + <html><head/><body><p>Nimi, jota käytetään dokumenttiä luotaessa.</p><p>Jätä tyhjäksi nimetöntä varten.</p><p>voit käyttää myös muotoa:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> If this is checked, the "Last modified by" field will be set when saving the file - + Jos tämä on valittuna, "Viimeksi muutettu"-kenttä asetetaan, kun tallennat tiedostoa Set on save - + Aseta tallennettaessa Company - + Yritys Default license - + Oletuslisenssi The default license for new documents - + Oletuslisenssi uusille dokumenteille All rights reserved - + Kaikki oikeudet pidätetään CreativeCommons Attribution - + CreativeCommons ominaisuudet CreativeCommons Attribution-ShareAlike - + CreativeCommons ominaisuudet-JaaSamankaltaiset CreativeCommons Attribution-NoDerivatives - + CreativeCommons ominaisuudet-EiJohdannaisia CreativeCommons Attribution-NonCommercial - + CreativeCommons ominaisuudet-EiKaupallinen CreativeCommons Attribution-NonCommercial-ShareAlike - + CreativeCommons ominaisuudet-EiKaupallinen-JaaSamankaltaisia CreativeCommons Attribution-NonCommercial-NoDerivatives - + CreativeCommons ominaisuudet-EiKaupallinen-EiJohdannaisia Public Domain - + Julkinen Aineisto FreeArt - + FreeArt Other - + Muu License URL - License URL + Lisenssi URL An URL where the user can find more details about the license - + URL, josta käyttäjä voi löytää lisätietoa lisenssistä http://en.wikipedia.org/wiki/All_rights_reserved - + http://en.wikipedia.org/wiki/All_rights_reserved The default company to use for new files - + Oletusyhtiö, jota käytetään uusille tiedostoille @@ -2127,14 +2123,14 @@ Specify another directory, please. Current line highlight - Nykyisen rivin kohokohta + Nykyinen rivin korostus Gui::Dialog::DlgSettingsImage Image settings - Kuvan asetukset + Kuva-asetukset Image properties @@ -2156,10 +2152,6 @@ Specify another directory, please. Black Musta - - Transparent - Läpinäkyvä - Image dimensions Kuvan mitat @@ -2337,7 +2329,7 @@ Specify another directory, please. Show script commands in python console - Näytä script komennot python konsolissa + Näytä skripti komennot python konsolissa Log all commands issued by menus to file: @@ -2404,15 +2396,15 @@ Specify another directory, please. US customary (in/lb) - US customary (in/lb) + US tavalla (tuumat/ paunat) Number of decimals: - Number of decimals: + Desimaalien määrä: Imperial decimal (in/lb) - Imperial decimal (in/lb) + englantilainen desimaaliluku (tuumat / paunat) @@ -2427,7 +2419,7 @@ Specify another directory, please. Enable selection highlighting - Ota käyttöön, korostus + Ota käyttöön valinnan korostus Enable preselection highlighting @@ -2498,14 +2490,14 @@ Specify another directory, please. If you want to learn more about FreeCAD you must go to %1 or press the Help item in the Help menu. - Jos haluat lisätietoja FreeCAD:sta Siirry %1 tai painaa Ohje-vaihtoehtoa Ohje-valikosta. + Jos haluat lisätietoja FreeCAD:sta, niin siirry %1:een tai paina Ohje-vaihtoehtoa Ohje-valikosta. Gui::Dialog::DlgUnitsCalculator Unit mismatch - Unit mismatch + Yksikön ristiriita @@ -2555,50 +2547,50 @@ Specify another directory, please. %1 at %2 - %1 at %2 + %1 on %2:ssa Gui::Dialog::DownloadItem Save File - Save File + Tallenna tiedosto Download canceled: %1 - Download canceled: %1 + Lataus peruutettu: %1 Open containing folder - Open containing folder + Avaa sisältävä kansio Error opening save file: %1 - Error opening save file: %1 + Virhe avattaessa tallennettavaa tiedostoa: %1 Error saving: %1 - Error saving: %1 + Virhe tallennettaessa: %1 Network Error: %1 - Network Error: %1 + Verkkovirhe: %1 seconds - seconds + sekuntia minutes - minutes + minuuttia - %4 %5 remaining - - %4 %5 remaining + -%4 %5 jäljellä %1 of %2 (%3/sec) %4 - %1 of %2 (%3/sec) %4 + %1 on %2:sta (%3/s) %4 ? @@ -2606,11 +2598,11 @@ Specify another directory, please. %1 of %2 - Stopped - %1 of %2 - Stopped + %1 %2:sta - keskeytynyt bytes - bytes + tavua kB @@ -2625,57 +2617,53 @@ Specify another directory, please. Gui::Dialog::DownloadManager Downloads - Downloads + Lataukset Clean up - Clean up + Siivoa 0 Items - 0 Items + 0 kohdetta Download Manager - Download Manager + Latauksenhallinta 1 Download - 1 Download + 1 Lataus %1 Downloads - %1 Downloads + %1 Latausta Gui::Dialog::IconDialog - - Add icon - Lisää kuvake - Icon folders - + Kuvake kansiot Add icon folder - + Lisää kuvake kansio Gui::Dialog::IconFolders Add or remove custom icon folders - + Mukautetun kuvakkeen kansioiden lisääminen tai poistaminen Remove folder - + Poista kansio Removing a folder only takes effect after an application restart. - + Kansion poistaminen tulee voimaan, kun sovellus on käynnistetty uudelleen. @@ -2929,11 +2917,11 @@ Specify another directory, please. Incorrect quantity - + Virheellinen määrä There are input fields with incorrect input, please ensure valid placement values! - + Syöttökentissä on virheellisiä tietoja, varmista että on kelvolliset sijoitetut arvot! @@ -3058,7 +3046,7 @@ Specify another directory, please. Model - Model + Malli @@ -3173,39 +3161,39 @@ Specify another directory, please. Search - + Haku Searches object labels - + Hae kohteiden nimilappuja Clears the search field - + Tyhjentää Etsi-kentän Select only - + Valitse vain Selects only this object - + Valitsee vain tämä objektin Deselect - + Poista valinta Deselects this object - + Poistaa tämän objektin valinnan Zoom fit - + Zoomaa sopivaksi Selects and fits this object in the 3D window - + Valitsee ja sovittaa tämän kohteen 3D-ikkunassa Go to selection @@ -3213,7 +3201,7 @@ Specify another directory, please. Selects and locates this object in the tree view - + Valitsee ja paikantaa tämän kohteen puunäkymässä @@ -3286,7 +3274,7 @@ Specify another directory, please. Labels & Attributes - Otsikot & Määritteet + Nimilaput & Määritteet @@ -3405,31 +3393,31 @@ Do you want to save your changes? Gui::GraphvizView PNG format (*.png) - PNG format (*.png) + PNG-muodossa (*.png) Bitmap format (*.bmp) - Bitmap format (*.bmp) + Bittikarttamuoto (*.bmp) GIF format (*.gif) - GIF format (*.gif) + GIF-muodossa (*.gif) JPG format (*.jpg) - JPG format (*.jpg) + JPG-muodossa (*.jpg) SVG format (*.svg) - SVG format (*.svg) + SVG-muodossa (*.svg) PDF format (*.pdf) - PDF format (*.pdf) + PDF-muodossa (*.pdf) Export graph - Export graph + Vie kaavio @@ -3440,7 +3428,7 @@ Do you want to save your changes? Save value - Save value + Tallenna arvo @@ -3466,7 +3454,7 @@ Do you want to save your changes? Gui::LabelEditor List - + Lista @@ -3546,13 +3534,13 @@ Do you want to save your changes? Object dependencies - Object dependencies + Kohteiden riippuvuudet The selected objects have a dependency to unselected objects. Do you want to copy them, too? - The selected objects have a dependency to unselected objects. -Do you want to copy them, too? + Valituilla kohteilla on riippuvuus valitsemattomiin kohteisiin. +Haluatko luoda niistä myös kaksoiskappaleet? @@ -3640,7 +3628,7 @@ How do you want to proceed? No point was found on model - No point was found on model + Yhtään pistettä ei löytynyt mallista @@ -3660,11 +3648,11 @@ How do you want to proceed? Save value - Save value + Tallenna arvo Clear list - + Tyhjennä luettelo @@ -3701,7 +3689,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel Edit... - Edit... + Muokkaa... @@ -3917,11 +3905,11 @@ Haluatko valita toisen hakemiston? Automatic python modules documentation - Automatic python modules documentation + Automaattinen python moduulien dokumentaatio Opens a browser to show the Python modules documentation - Opens a browser to show the Python modules documentation + Avaa selain näyttämään Python moduulien dokumentaatio @@ -4010,7 +3998,7 @@ Haluatko valita toisen hakemiston? Press CTRL and SHIFT buttons - Press CTRL and SHIFT buttons + Paina CTRL ja SHIFT painikkeet @@ -4044,7 +4032,7 @@ Haluatko valita toisen hakemiston? Labels & Attributes - Otsikot & Määritteet + Nimilaput & Määritteet Application @@ -4089,11 +4077,11 @@ Haluatko valita toisen hakemiston? NetworkAccessManager <qt>Enter username and password for "%1" at %2</qt> - <qt>Enter username and password for "%1" at %2</qt> + <qt>Kirjoita käyttäjänimi ja salasana "%1":lle %2:ssa</qt> <qt>Connect to proxy "%1" using:</qt> - <qt>Connect to proxy "%1" using:</qt> + <qt>Yhdistä välityspalvelimeen "%1" käyttäen:</qt> @@ -4183,7 +4171,7 @@ Haluatko valita toisen hakemiston? Input in line %1 is not a number - + Syötetty tieto viivalla %1 ei ole numero @@ -4425,10 +4413,6 @@ Haluatko jatkaa? Unsaved document Tallentamaton asiakirja - - Save document before close? - Tallennetaanko asiakirja ennen sulkemista? - Save Macro Tallenna makro @@ -4585,11 +4569,11 @@ Sinun täytyy joko saattaa loppuun muokkaus tai peruuttaa tässä tehtäväruudu Do you want to save your changes to document '%1' before closing? - + Haluatko tallentaa asiakirjan "%1" muutokset ennen sulkemista? If you don't save, your changes will be lost. - + Jos et tallenna, niin tekemäsi muutokset menetetään. @@ -5035,15 +5019,15 @@ Sinun täytyy joko saattaa loppuun muokkaus tai peruuttaa tässä tehtäväruudu FreeCAD FAQ - FreeCAD FAQ + FreeCAD tietoja Frequently Asked Questions on the FreeCAD website - Frequently Asked Questions on the FreeCAD website + Usein kysyttyjä kysymyksiä FreeCAD-sivustolla Frequently Asked Questions - Frequently Asked Questions + Usein kysyttyjä kysymyksiä @@ -5054,15 +5038,15 @@ Sinun täytyy joko saattaa loppuun muokkaus tai peruuttaa tässä tehtäväruudu FreeCAD Forum - FreeCAD Forum + FreeCAD foorumi The FreeCAD forum, where you can find help from other users - The FreeCAD forum, where you can find help from other users + FreeCAD foorumi, josta löydät apua muilta käyttäjiltä The FreeCAD Forum - The FreeCAD Forum + FreeCAD foorumi @@ -5073,15 +5057,15 @@ Sinun täytyy joko saattaa loppuun muokkaus tai peruuttaa tässä tehtäväruudu Python scripting documentation - Python scripting documentation + Python komentosarjojen ohjeisto Python scripting documentation on the FreeCAD website - Python scripting documentation on the FreeCAD website + Python komentosarjojen ohjeisto FreeCAD-sivustolla PowerUsers documentation - PowerUsers documentation + Tehokäyttäjän ohjeisto @@ -5092,11 +5076,11 @@ Sinun täytyy joko saattaa loppuun muokkaus tai peruuttaa tässä tehtäväruudu Users documentation - Users documentation + Käyttäjän ohjeisto Documentation for users on the FreeCAD website - Documentation for users on the FreeCAD website + Ohjeita käyttäjille FreeCAD-sivustolla @@ -5205,7 +5189,7 @@ Sinun täytyy joko saattaa loppuun muokkaus tai peruuttaa tässä tehtäväruudu Step into - Step into + Astu sisälle @@ -5314,7 +5298,7 @@ Sinun täytyy joko saattaa loppuun muokkaus tai peruuttaa tässä tehtäväruudu Unnamed - Unnamed + Nimetön @@ -5367,11 +5351,11 @@ Sinun täytyy joko saattaa loppuun muokkaus tai peruuttaa tässä tehtäväruudu Cannot open file - + Tiedostoa ei voi avata Loading the file %1 is not supported - + Tiedoston %1 lataamista ei tueta @@ -5888,11 +5872,11 @@ Sinun täytyy joko saattaa loppuun muokkaus tai peruuttaa tässä tehtäväruudu &Units calculator... - &Units calculator... + & Yksiköiden laskin... Start the units calculator - Start the units calculator + Käynnistä yksiköiden laskimen @@ -6126,21 +6110,13 @@ Sinun täytyy joko saattaa loppuun muokkaus tai peruuttaa tässä tehtäväruudu Standard-View Standardi-Näkymä - - Stereo red/green - Kolmiulotteinen puna/vihreä - - - Switch stereo viewing to red/green - Vaihda stereokatselusta puna-/viherkatseluun - Stereo red/cyan - + Stereo punainen/syaani Switch stereo viewing to red/cyan - + Vaihda stereokatselu punainen/syaani -näkymään @@ -6241,11 +6217,11 @@ Sinun täytyy joko saattaa loppuun muokkaus tai peruuttaa tässä tehtäväruudu FreeCAD-VR - + FreeCAD-VR Extend the FreeCAD 3D Window to a Oculus Rift - + Laajentaa FreeCAD 3D-näkymä Oculus Rift :iin @@ -6401,13 +6377,13 @@ Sinun täytyy joko saattaa loppuun muokkaus tai peruuttaa tässä tehtäväruudu Std_Delete Object dependencies - Object dependencies + Kohteiden riippuvuudet This object is referenced by other objects and thus these objects might get broken. Are you sure to continue? - This object is referenced by other objects and thus these objects might get broken. -Are you sure to continue? + Tähän kohteeseen viittaavat muut kohteet ja siten ne kohteet voivat rikkoutua. +Haluatko varmasti jatkaa? @@ -6430,19 +6406,19 @@ Are you sure to continue? Flat lines - Flat lines + Tasainen rivit Flat lines mode - Flat lines mode + Tasaisten rivien tila Shaded - Shaded + Varjostettu Shaded mode - Shaded mode + Varjostettu tila Points @@ -6450,20 +6426,20 @@ Are you sure to continue? Points mode - Points mode + Pisteiden tila Std_DuplicateSelection Object dependencies - Object dependencies + Kohteiden riippuvuudet The selected objects have a dependency to unselected objects. Do you want to duplicate them, too? - The selected objects have a dependency to unselected objects. -Do you want to duplicate them, too? + Valituilla kohteilla on riippuvuus valitsemattomiin kohteisiin. +Haluatko luoda niistä myös kaksoiskappaleet? diff --git a/src/Gui/Language/FreeCAD_fr.qm b/src/Gui/Language/FreeCAD_fr.qm index fd4143b073..6b8858d352 100644 Binary files a/src/Gui/Language/FreeCAD_fr.qm and b/src/Gui/Language/FreeCAD_fr.qm differ diff --git a/src/Gui/Language/FreeCAD_fr.ts b/src/Gui/Language/FreeCAD_fr.ts index 5eb20d776d..58236a9ddc 100644 --- a/src/Gui/Language/FreeCAD_fr.ts +++ b/src/Gui/Language/FreeCAD_fr.ts @@ -486,13 +486,9 @@ while doing a left or right click and move the mouse up or down Choose Icon Choisir l'icône - - Add icons... - Ajouter des icônes... - Icon folders... - + Dossiers d'icônes... @@ -943,87 +939,87 @@ Veuillez définir un autre raccourci. Aluminium - + Aluminium Brass - + Laiton Bronze - + Bronze Copper - + Cuivre Chrome - + Chrome Emerald - + Émeraude Gold - + Or Jade - + Jade Metalized - + Métallisé Neon GNC - + Néon GNC Neon PHC - + Néon PHC Obsidian - + Obsidienne Pewter - + Étain Plaster - + Plâtre Plastic - + Plastique Ruby - + Rubis Satin - + Satin Shiny plastic - + Plastique brillant Silver - + Argent Steel - + Acier Stone - + Pierre @@ -1599,13 +1595,9 @@ Veuillez spécifier un autre répertoire. No selection Pas de sélection - - Please select an object of the list - Veuillez sélectionner un objet de la liste - Please select an object from the list - + Veuillez sélectionner un objet dans la liste @@ -1980,75 +1972,75 @@ Veuillez spécifier un autre répertoire. Authoring and License - + Création et Licence Author name - + Nom de l'auteur <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> - + <html><head/><body><p>Le nom à utiliser à la création d'un document.</p><p>Laisser vide si anonyme.</p><p>Vous pouvez également utiliser le formulaire : </p><p>John Doe &lt; john@doe.com &gt;</p></body></html> If this is checked, the "Last modified by" field will be set when saving the file - + Si cette case est cochée, le champ « Dernière modification par » sera défini lors de l'enregistrement du fichier Set on save - + Réglage à la sauvegarde Company - + Société Default license - + Licence par défaut The default license for new documents - + La licence par défaut pour les nouveaux documents All rights reserved - + Tous droits réservés CreativeCommons Attribution - + CreativeCommons Paternité CreativeCommons Attribution-ShareAlike - + CreativeCommons Paternité-Partage à l’Identique CreativeCommons Attribution-NoDerivatives - + CreativeCommons Paternité-Pas de Modification CreativeCommons Attribution-NonCommercial - + CreativeCommons Paternité-Pas d’Utilisation Commerciale CreativeCommons Attribution-NonCommercial-ShareAlike - + CreativeCommons Paternité-Pas d’Utilisation Commerciale-Partage à l’Identique CreativeCommons Attribution-NonCommercial-NoDerivatives - + CreativeCommons Paternité-Pas d’Utilisation Commerciale-Pas de Modification Public Domain - + Domaine public FreeArt - + Art Libre Other - + Autre License URL @@ -2056,15 +2048,15 @@ Veuillez spécifier un autre répertoire. An URL where the user can find more details about the license - + Une URL où l'utilisateur peut trouver plus d'informations sur la licence http://en.wikipedia.org/wiki/All_rights_reserved - + http://fr.wikipedia.org/wiki/Copyright The default company to use for new files - + La société par défaut à utiliser pour les nouveaux fichiers @@ -2160,10 +2152,6 @@ Veuillez spécifier un autre répertoire. Black Noir - - Transparent - Transparent - Image dimensions Dimensions de l'image @@ -2655,32 +2643,28 @@ Veuillez spécifier un autre répertoire. Gui::Dialog::IconDialog - - Add icon - Ajouter une icône - Icon folders - + Dossiers d'icônes Add icon folder - + Ajouter un dossier d'icône Gui::Dialog::IconFolders Add or remove custom icon folders - + Ajouter ou supprimer des dossiers d'icônes personnalisés Remove folder - + Supprimer le dossier Removing a folder only takes effect after an application restart. - + Retirer un dossier ne prend effet qu'après le redémarrage de l'application. @@ -2934,11 +2918,11 @@ Veuillez spécifier un autre répertoire. Incorrect quantity - + Quantité incorrecte There are input fields with incorrect input, please ensure valid placement values! - + Il y a des champs de saisie avec une entrée incorrecte, veuillez vous assurer que les valeurs de positionnement soient valide ! @@ -3178,39 +3162,39 @@ Veuillez spécifier un autre répertoire. Search - + Rechercher Searches object labels - + Rechercher dans les étiquettes des objets Clears the search field - + Effacer le champ de recherche Select only - + Sélectionnez uniquement Selects only this object - + Sélectionne uniquement cet objet Deselect - + Dé-sélectionner Deselects this object - + Désélectionne cet objet Zoom fit - + Ajustement du zoom Selects and fits this object in the 3D window - + Sélectionne et ajuste le zoom de cet objet dans la fenêtre 3D Go to selection @@ -3218,7 +3202,7 @@ Veuillez spécifier un autre répertoire. Selects and locates this object in the tree view - + Sélectionne et localise cet objet dans l'arborescence @@ -3472,7 +3456,7 @@ Voulez enregistrer les modifications ? Gui::LabelEditor List - + Liste  @@ -3667,7 +3651,7 @@ How do you want to proceed? Clear list - + Effacer la liste @@ -4185,7 +4169,7 @@ Do you want to specify another directory? Input in line %1 is not a number - + L'entrée à la ligne %1 n'est pas un nombre @@ -4426,10 +4410,6 @@ Do you want to continue? Unsaved document Document non sauvegardé - - Save document before close? - Enregistrer le document avant de fermer ? - Save Macro Enregistrer la macro @@ -4585,11 +4565,11 @@ You either have to finish or cancel the editing in the task panel. Do you want to save your changes to document '%1' before closing? - + Voulez-vous enregistrer les modifications apportées au document '%1' avant la fermeture ? If you don't save, your changes will be lost. - + Si vous n'enregistrez pas, vos modifications seront perdues. @@ -5367,11 +5347,11 @@ You either have to finish or cancel the editing in the task panel. Cannot open file - + Impossible d'ouvrir le fichier Loading the file %1 is not supported - + Charger le fichier %1 n'est pas pris en charge @@ -6126,21 +6106,13 @@ You either have to finish or cancel the editing in the task panel. Standard-View Vue standard - - Stereo red/green - Stéréo rouge/vert - - - Switch stereo viewing to red/green - Basculer la vue stéréo vers la technique anaglyphique rouge/vert - Stereo red/cyan - + Stéréo rouge/cyan Switch stereo viewing to red/cyan - + Basculer la vision stéréoscopique vers rouge/cyan @@ -6241,11 +6213,11 @@ You either have to finish or cancel the editing in the task panel. FreeCAD-VR - + FreeCAD-VR Extend the FreeCAD 3D Window to a Oculus Rift - + Étendre la fenêtre 3D FreeCAD pour l'Oculus Rift diff --git a/src/Gui/Language/FreeCAD_hr.qm b/src/Gui/Language/FreeCAD_hr.qm index 8fb5e7f781..d60846a8d0 100644 Binary files a/src/Gui/Language/FreeCAD_hr.qm and b/src/Gui/Language/FreeCAD_hr.qm differ diff --git a/src/Gui/Language/FreeCAD_hr.ts b/src/Gui/Language/FreeCAD_hr.ts index b0866af8fd..5e9d965043 100644 --- a/src/Gui/Language/FreeCAD_hr.ts +++ b/src/Gui/Language/FreeCAD_hr.ts @@ -487,13 +487,9 @@ while doing a left or right click and move the mouse up or down Choose Icon Odaberite Iconu - - Add icons... - Dodaj ikone ... - Icon folders... - + Icon folders... @@ -942,87 +938,87 @@ Please define another shortcut. Aluminium - + Aluminium Brass - + Brass Bronze - + Bronze Copper - + Copper Chrome - + Chrome Emerald - + Emerald Gold - + Gold Jade - + Jade Metalized - + Metalized Neon GNC - + Neon GNC Neon PHC - + Neon PHC Obsidian - + Obsidian Pewter - + Pewter Plaster - + Plaster Plastic - + Plastic Ruby - + Ruby Satin - + Satin Shiny plastic - + Shiny plastic Silver - + Silver Steel - + Steel Stone - + Stone @@ -1597,13 +1593,9 @@ Specify another directory, please. No selection Nema odabira - - Please select an object of the list - Please select an object of the list - Please select an object from the list - + Please select an object from the list @@ -1977,75 +1969,75 @@ Specify another directory, please. Authoring and License - + Authoring and License Author name - + Author name <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> - + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> If this is checked, the "Last modified by" field will be set when saving the file - + If this is checked, the "Last modified by" field will be set when saving the file Set on save - + Set on save Company - + Company Default license - + Default license The default license for new documents - + The default license for new documents All rights reserved - + All rights reserved CreativeCommons Attribution - + CreativeCommons Attribution CreativeCommons Attribution-ShareAlike - + CreativeCommons Attribution-ShareAlike CreativeCommons Attribution-NoDerivatives - + CreativeCommons Attribution-NoDerivatives CreativeCommons Attribution-NonCommercial - + CreativeCommons Attribution-NonCommercial CreativeCommons Attribution-NonCommercial-ShareAlike - + CreativeCommons Attribution-NonCommercial-ShareAlike CreativeCommons Attribution-NonCommercial-NoDerivatives - + CreativeCommons Attribution-NonCommercial-NoDerivatives Public Domain - + Public Domain FreeArt - + FreeArt Other - + Other License URL @@ -2053,15 +2045,15 @@ Specify another directory, please. An URL where the user can find more details about the license - + An URL where the user can find more details about the license http://en.wikipedia.org/wiki/All_rights_reserved - + http://en.wikipedia.org/wiki/All_rights_reserved The default company to use for new files - + The default company to use for new files @@ -2157,10 +2149,6 @@ Specify another directory, please. Black Crna - - Transparent - Transparentan - Image dimensions Dimenzije slike @@ -2651,32 +2639,28 @@ Specify another directory, please. Gui::Dialog::IconDialog - - Add icon - Dodaj ikonu - Icon folders - + Icon folders Add icon folder - + Add icon folder Gui::Dialog::IconFolders Add or remove custom icon folders - + Add or remove custom icon folders Remove folder - + Remove folder Removing a folder only takes effect after an application restart. - + Removing a folder only takes effect after an application restart. @@ -2930,11 +2914,11 @@ Specify another directory, please. Incorrect quantity - + Incorrect quantity There are input fields with incorrect input, please ensure valid placement values! - + There are input fields with incorrect input, please ensure valid placement values! @@ -3174,39 +3158,39 @@ Specify another directory, please. Search - + Search Searches object labels - + Searches object labels Clears the search field - + Clears the search field Select only - + Select only Selects only this object - + Selects only this object Deselect - + Odznači Deselects this object - + Deselects this object Zoom fit - + Zoom fit Selects and fits this object in the 3D window - + Selects and fits this object in the 3D window Go to selection @@ -3214,7 +3198,7 @@ Specify another directory, please. Selects and locates this object in the tree view - + Selects and locates this object in the tree view @@ -3466,7 +3450,7 @@ Do you want to save your changes? Gui::LabelEditor List - + List @@ -3664,7 +3648,7 @@ Kako želite nastaviti? Clear list - + Clear list @@ -4183,7 +4167,7 @@ Do you want to specify another directory? Input in line %1 is not a number - + Input in line %1 is not a number @@ -4424,10 +4408,6 @@ Do you want to continue? Unsaved document Nespremljeni dokument - - Save document before close? - Spremi dokument prije zatvaranja? - Save Macro Spremi Makro @@ -4583,11 +4563,11 @@ You either have to finish or cancel the editing in the task panel. Do you want to save your changes to document '%1' before closing? - + Do you want to save your changes to document '%1' before closing? If you don't save, your changes will be lost. - + If you don't save, your changes will be lost. @@ -5365,11 +5345,11 @@ You either have to finish or cancel the editing in the task panel. Cannot open file - + Cannot open file Loading the file %1 is not supported - + Loading the file %1 is not supported @@ -6124,21 +6104,13 @@ You either have to finish or cancel the editing in the task panel. Standard-View Standardni pogled - - Stereo red/green - Stereo crveno / zeleno - - - Switch stereo viewing to red/green - Prebaci stereo gledanje u crveno / zeleno - Stereo red/cyan - + Stereo red/cyan Switch stereo viewing to red/cyan - + Switch stereo viewing to red/cyan @@ -6239,11 +6211,11 @@ You either have to finish or cancel the editing in the task panel. FreeCAD-VR - + FreeCAD-VR Extend the FreeCAD 3D Window to a Oculus Rift - + Extend the FreeCAD 3D Window to a Oculus Rift diff --git a/src/Gui/Language/FreeCAD_hu.qm b/src/Gui/Language/FreeCAD_hu.qm index dd9bd050c3..ab5e6f5737 100644 Binary files a/src/Gui/Language/FreeCAD_hu.qm and b/src/Gui/Language/FreeCAD_hu.qm differ diff --git a/src/Gui/Language/FreeCAD_hu.ts b/src/Gui/Language/FreeCAD_hu.ts index a1cc70072a..bf8e9f7de7 100644 --- a/src/Gui/Language/FreeCAD_hu.ts +++ b/src/Gui/Language/FreeCAD_hu.ts @@ -60,22 +60,22 @@ CmdViewMeasureClearAll Measure - Measure + Mérés Clear measurement - Clear measurement + Méretek törlése CmdViewMeasureToggleAll Measure - Measure + Mérés Toggle measurement - Toggle measurement + Mérés ki/be kapcsolása @@ -125,11 +125,11 @@ DlgUnitCalculator Units calculator - Units calculator + Mennyiségi egységek számítása as: - as: + mint: => @@ -160,7 +160,7 @@ Filename - Filename + Fájlnév @@ -239,13 +239,12 @@ Press middle and left or right mouse button - Press middle and left or right mouse button + Nyomja meg a középső és a jobb vagy bal egérgombot Scroll middle mouse button or keep middle button pressed while doing a left or right click and move the mouse up or down - Scroll middle mouse button or keep middle button pressed -while doing a left or right click and move the mouse up or down + Görgesse a középső egérgombot vagy tartsa a középső gombot megnyomva, a bal vagy jobb kattintás esetén, és mozgassa az egeret felfelé vagy lefelé @@ -313,7 +312,7 @@ while doing a left or right click and move the mouse up or down Word size - Word size + Szó méret @@ -331,11 +330,11 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::Clipping Clipping - Clipping + Nyírás Clipping X - Clipping X + Nyírás X Flip @@ -347,15 +346,15 @@ while doing a left or right click and move the mouse up or down Clipping Y - Clipping Y + Nyírás X Clipping Z - Clipping Z + Nyírás Z Clipping custom direction - Clipping custom direction + Nyírás egyéni irányba View @@ -363,7 +362,7 @@ while doing a left or right click and move the mouse up or down Adjust to view direction - Adjust to view direction + Állítsa be a nézet irányát Direction @@ -470,15 +469,15 @@ while doing a left or right click and move the mouse up or down Username: - Username: + Felhasználónév: Site: - Site: + Oldal: %1 at %2 - %1 at %2 + %1 ezen %2 @@ -487,13 +486,9 @@ while doing a left or right click and move the mouse up or down Choose Icon Válassz ikont - - Add icons... - Ikon hozzáadása... - Icon folders... - + Icon folders... @@ -640,11 +635,11 @@ while doing a left or right click and move the mouse up or down &Category: - &Csoportosítás: + Csoportosítás: C&ommands: - Parancs&ok: + Parancsok: Current shortcut: @@ -832,7 +827,7 @@ Kérem másik elérési utat definiálni. &Help - Súgó &H + Súgó &Close @@ -944,87 +939,87 @@ Kérem másik elérési utat definiálni. Aluminium - + Aluminium Brass - + Brass Bronze - + Bronze Copper - + Copper Chrome - + Chrome Emerald - + Emerald Gold - + Gold Jade - + Jade Metalized - + Metalized Neon GNC - + Neon GNC Neon PHC - + Neon PHC Obsidian - + Obsidian Pewter - + Pewter Plaster - + Plaster Plastic - + Plastic Ruby - + Ruby Satin - + Satin Shiny plastic - + Shiny plastic Silver - + Silver Steel - + Acél Stone - + Stone @@ -1134,11 +1129,11 @@ Kérem másik elérési utat definiálni. Enable tiled background - Enable tiled background + Engedélyezi a csempézett háttérképet Style sheet: - Style sheet: + Stíluslap: @@ -1161,7 +1156,7 @@ Kérem másik elérési utat definiálni. No style sheet - No style sheet + Nincs stíluslap @@ -1316,7 +1311,7 @@ This file already exists. You have no write permission for the directory. Please, choose another one. - You have no write permission for the directory. Please, choose another one. + A könyvtárhoz nincs írási engedélye. Válasszon egy másikat. @@ -1516,15 +1511,15 @@ Kérem válasszon másik könyvtárat. License information: - License information: + Licenc információ: License URL - License URL + Licenc URL-címe Open in browser - Open in browser + Megnyitás böngészőben @@ -1590,23 +1585,19 @@ Kérem válasszon másik könyvtárat. Gui::Dialog::DlgPropertyLink Link - Link + Hivatkozás Show all object types - Show all object types + Mutassa az összes objektum típust No selection Nincs kijelölés - - Please select an object of the list - Please select an object of the list - Please select an object from the list - + Please select an object from the list @@ -1672,7 +1663,7 @@ Kérem válasszon másik könyvtárat. TextLabel - TextLabel + Szövegcimke Advanced >> @@ -1787,7 +1778,7 @@ Kérem válasszon másik könyvtárat. Anti-Aliasing - Anti-Aliasing + Élsimítás None @@ -1795,19 +1786,19 @@ Kérem válasszon másik könyvtárat. Line Smoothing - Line Smoothing + Vonal simítás MSAA 2x - MSAA 2x + MSAA 2 x MSAA 4x - MSAA 4x + MSAA 4 x MSAA 8x - MSAA 8x + MSAA 8 x @@ -1825,7 +1816,7 @@ Kérem válasszon másik könyvtárat. &Gradient: - &Színátmenet: + Színátmenet: red-yellow-green-cyan-blue @@ -1981,91 +1972,91 @@ Kérem válasszon másik könyvtárat. Authoring and License - + Authoring and License Author name - + Author name <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> - + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> If this is checked, the "Last modified by" field will be set when saving the file - + If this is checked, the "Last modified by" field will be set when saving the file Set on save - + Set on save Company - + Company Default license - + Default license The default license for new documents - + The default license for new documents All rights reserved - + All rights reserved CreativeCommons Attribution - + CreativeCommons Attribution CreativeCommons Attribution-ShareAlike - + CreativeCommons Attribution-ShareAlike CreativeCommons Attribution-NoDerivatives - + CreativeCommons Attribution-NoDerivatives CreativeCommons Attribution-NonCommercial - + CreativeCommons Attribution-NonCommercial CreativeCommons Attribution-NonCommercial-ShareAlike - + CreativeCommons Attribution-NonCommercial-ShareAlike CreativeCommons Attribution-NonCommercial-NoDerivatives - + CreativeCommons Attribution-NonCommercial-NoDerivatives Public Domain - + Public Domain FreeArt - + FreeArt Other - + Other License URL - License URL + Licenc URL-címe An URL where the user can find more details about the license - + An URL where the user can find more details about the license http://en.wikipedia.org/wiki/All_rights_reserved - + http://en.wikipedia.org/wiki/All_rights_reserved The default company to use for new files - + The default company to use for new files @@ -2161,10 +2152,6 @@ Kérem válasszon másik könyvtárat. Black Fekete - - Transparent - Átlátszó - Image dimensions Kép méretei @@ -2409,15 +2396,15 @@ Kérem válasszon másik könyvtárat. US customary (in/lb) - US customary (in/lb) + U.S. szokásos (in / lb) Number of decimals: - Number of decimals: + Tizedesjegyek száma: Imperial decimal (in/lb) - Imperial decimal (in/lb) + Császári decimális (in / lb) @@ -2510,7 +2497,7 @@ Kérem válasszon másik könyvtárat. Gui::Dialog::DlgUnitsCalculator Unit mismatch - Unit mismatch + Mértékegység eltérés @@ -2560,50 +2547,50 @@ Kérem válasszon másik könyvtárat. %1 at %2 - %1 at %2 + %1 ezen %2 Gui::Dialog::DownloadItem Save File - Save File + Fájl mentése Download canceled: %1 - Download canceled: %1 + Letöltés megszakítva: %1 Open containing folder - Open containing folder + Tartalmazó mappa megnyitása Error opening save file: %1 - Error opening save file: %1 + Mentett fájl megnyitási hiba: %1 Error saving: %1 - Error saving: %1 + Mentés hiba: %1 Network Error: %1 - Network Error: %1 + Hálózati hiba: %1 seconds - seconds + másodpercek minutes - minutes + percek - %4 %5 remaining - - %4 %5 remaining + -%4 %5 még hátra van %1 of %2 (%3/sec) %4 - %1 of %2 (%3/sec) %4 + %1 ebből %2 (%3/sec) %4 ? @@ -2611,11 +2598,11 @@ Kérem válasszon másik könyvtárat. %1 of %2 - Stopped - %1 of %2 - Stopped + %1 ebből %2 - Leállítva bytes - bytes + bájt kB @@ -2630,57 +2617,53 @@ Kérem válasszon másik könyvtárat. Gui::Dialog::DownloadManager Downloads - Downloads + Letöltések Clean up - Clean up + Takarítás 0 Items - 0 Items + 0 cikk található Download Manager - Download Manager + Letöltéskezelő 1 Download - 1 Download + 1 letöltés %1 Downloads - %1 Downloads + %1 letöltés Gui::Dialog::IconDialog - - Add icon - Ikon hozzáadása - Icon folders - + Icon folders Add icon folder - + Add icon folder Gui::Dialog::IconFolders Add or remove custom icon folders - + Add or remove custom icon folders Remove folder - + Remove folder Removing a folder only takes effect after an application restart. - + Removing a folder only takes effect after an application restart. @@ -2934,11 +2917,11 @@ Kérem válasszon másik könyvtárat. Incorrect quantity - + Incorrect quantity There are input fields with incorrect input, please ensure valid placement values! - + There are input fields with incorrect input, please ensure valid placement values! @@ -3063,7 +3046,7 @@ Kérem válasszon másik könyvtárat. Model - Model + Modell @@ -3178,39 +3161,39 @@ Kérem válasszon másik könyvtárat. Search - + Search Searches object labels - + Searches object labels Clears the search field - + Clears the search field Select only - + Select only Selects only this object - + Selects only this object Deselect - + Kijelölés megszüntetése Deselects this object - + Deselects this object Zoom fit - + Zoom fit Selects and fits this object in the 3D window - + Selects and fits this object in the 3D window Go to selection @@ -3218,7 +3201,7 @@ Kérem válasszon másik könyvtárat. Selects and locates this object in the tree view - + Selects and locates this object in the tree view @@ -3411,31 +3394,31 @@ El akarja menteni a változásokat? Gui::GraphvizView PNG format (*.png) - PNG format (*.png) + PNG formátum (*.png) Bitmap format (*.bmp) - Bitmap format (*.bmp) + Bittérkép-formátumban (*.bmp) GIF format (*.gif) - GIF format (*.gif) + GIF formátum (*.gif) JPG format (*.jpg) - JPG format (*.jpg) + JPG formátumban (*.jpg) SVG format (*.svg) - SVG format (*.svg) + SVG formátumban (*.svg) PDF format (*.pdf) - PDF format (*.pdf) + PDF formátumban (*.pdf) Export graph - Export graph + Export grafikon @@ -3446,7 +3429,7 @@ El akarja menteni a változásokat? Save value - Save value + Érték mentése @@ -3472,7 +3455,7 @@ El akarja menteni a változásokat? Gui::LabelEditor List - + List @@ -3552,13 +3535,12 @@ El akarja menteni a változásokat? Object dependencies - Object dependencies + Objektumfüggőségek The selected objects have a dependency to unselected objects. Do you want to copy them, too? - The selected objects have a dependency to unselected objects. -Do you want to copy them, too? + A kijelölt objektumoknak függőségei vannak ki nem jelölt objektumokkal. Szeretné másolni azokat is? @@ -3649,7 +3631,7 @@ a jobboldali nézetben %2 pont lett jelölve. No point was found on model - No point was found on model + A modellen nem talált pontot @@ -3668,11 +3650,11 @@ a jobboldali nézetben %2 pont lett jelölve. Save value - Save value + Érték mentése Clear list - + Clear list @@ -3709,7 +3691,7 @@ a jobboldali nézetben %2 pont lett jelölve. Gui::PropertyEditor::LinkLabel Edit... - Edit... + Szerkesztés... @@ -3808,7 +3790,7 @@ Ki szeretne lépni az adatok mentése nélkül? &Paste - Beillesztés &P + Beillesztés Select All @@ -3924,11 +3906,11 @@ Meg szeretne adni egy másik könyvtárat? Automatic python modules documentation - Automatic python modules documentation + Automatikus python modulok dokumentáció Opens a browser to show the Python modules documentation - Opens a browser to show the Python modules documentation + A Python modulok dokumentációhoz megnyitja a böngészőt @@ -4017,7 +3999,7 @@ Meg szeretne adni egy másik könyvtárat? Press CTRL and SHIFT buttons - Press CTRL and SHIFT buttons + Nyomja meg a CTRL és a SHIFT gombokat @@ -4096,11 +4078,11 @@ Meg szeretne adni egy másik könyvtárat? NetworkAccessManager <qt>Enter username and password for "%1" at %2</qt> - <qt>Enter username and password for "%1" at %2</qt> + <qt>Ehhez "%1" itt %2 írja be a felhasználó nevet és a jelszót</qt> <qt>Connect to proxy "%1" using:</qt> - <qt>Connect to proxy "%1" using:</qt> + <qt>Kapcsolódás a "%1" proxyhoz ennek segítségével:</qt> @@ -4190,7 +4172,7 @@ Meg szeretne adni egy másik könyvtárat? Input in line %1 is not a number - + Input in line %1 is not a number @@ -4432,10 +4414,6 @@ Folytatni kívánja? Unsaved document Nem mentett dokumentum - - Save document before close? - Mentse a dokumentumot a bezárás előtt? - Save Macro Mentse a makrót @@ -4592,11 +4570,11 @@ You either have to finish or cancel the editing in the task panel. Do you want to save your changes to document '%1' before closing? - + Do you want to save your changes to document '%1' before closing? If you don't save, your changes will be lost. - + If you don't save, your changes will be lost. @@ -4749,7 +4727,7 @@ You either have to finish or cancel the editing in the task panel. Close Al&l - Összes bezárása &l + Összes bezárása Close all windows @@ -4779,7 +4757,7 @@ You either have to finish or cancel the editing in the task panel. C&opy - Más&olás + Másolás Copy operation @@ -4794,7 +4772,7 @@ You either have to finish or cancel the editing in the task panel. &Cut - Kivágás &C + Kivágás Cut out @@ -4809,7 +4787,7 @@ You either have to finish or cancel the editing in the task panel. &Delete - Törlés &D + Törlés Deletes the selected objects @@ -5042,15 +5020,15 @@ You either have to finish or cancel the editing in the task panel. FreeCAD FAQ - FreeCAD FAQ + FreeCAD GYIK Frequently Asked Questions on the FreeCAD website - Frequently Asked Questions on the FreeCAD website + Gyakran ismételt kérdések-FreeCAD honlapján Frequently Asked Questions - Frequently Asked Questions + Gyakran Ismételt Kérdések @@ -5061,15 +5039,15 @@ You either have to finish or cancel the editing in the task panel. FreeCAD Forum - FreeCAD Forum + FreeCAD fórum The FreeCAD forum, where you can find help from other users - The FreeCAD forum, where you can find help from other users + A FreeCAD fórum, ahol más felhasználóktól talál segítséget The FreeCAD Forum - The FreeCAD Forum + A FreeCAD-fórum @@ -5080,15 +5058,15 @@ You either have to finish or cancel the editing in the task panel. Python scripting documentation - Python scripting documentation + Python scripting dokumentáció Python scripting documentation on the FreeCAD website - Python scripting documentation on the FreeCAD website + Python scripting dokumentáció FreeCAD honlapján PowerUsers documentation - PowerUsers documentation + Kiemelt felhasználók dokumentációi @@ -5099,11 +5077,11 @@ You either have to finish or cancel the editing in the task panel. Users documentation - Users documentation + Felhasználói dokumentációk Documentation for users on the FreeCAD website - Documentation for users on the FreeCAD website + A FreeCAD honlapját használók dokumentációja @@ -5212,7 +5190,7 @@ You either have to finish or cancel the editing in the task panel. Step into - Step into + Lépj be @@ -5313,7 +5291,7 @@ You either have to finish or cancel the editing in the task panel. &New - Új &N + Új Create a new empty document @@ -5321,7 +5299,7 @@ You either have to finish or cancel the editing in the task panel. Unnamed - Unnamed + Névtelen @@ -5358,7 +5336,7 @@ You either have to finish or cancel the editing in the task panel. &Open... - Megnyitás &O... + Megnyitás... Open a document or import files @@ -5374,11 +5352,11 @@ You either have to finish or cancel the editing in the task panel. Cannot open file - + Cannot open file Loading the file %1 is not supported - + Loading the file %1 is not supported @@ -5389,7 +5367,7 @@ You either have to finish or cancel the editing in the task panel. &Paste - Beillesztés &P + Beillesztés Paste operation @@ -5419,7 +5397,7 @@ You either have to finish or cancel the editing in the task panel. &Print... - Nyomtatás &P... + Nyomtatás... Print the document @@ -5434,7 +5412,7 @@ You either have to finish or cancel the editing in the task panel. &Export PDF... - PDF &exportálása... + PDF &Exportálása... Export the document as PDF @@ -5449,7 +5427,7 @@ You either have to finish or cancel the editing in the task panel. &Print preview... - Nyomtatási ké&P... + Nyomtatási kép... Print the document @@ -5599,7 +5577,7 @@ You either have to finish or cancel the editing in the task panel. Save &As... - Mentés másként &A... + Mentés másként... Save the active document under a new file name @@ -5719,7 +5697,7 @@ You either have to finish or cancel the editing in the task panel. &Tile - Cím &T + Cím Tile the windows @@ -5820,7 +5798,7 @@ You either have to finish or cancel the editing in the task panel. Tool&bars - Eszköztárak &b + Eszköztárak Toggles this window @@ -5895,11 +5873,11 @@ You either have to finish or cancel the editing in the task panel. &Units calculator... - &Units calculator... + Mennyiségi egységek számítása... Start the units calculator - Start the units calculator + Mennyiségi egységek számításának elindítása @@ -6133,21 +6111,13 @@ You either have to finish or cancel the editing in the task panel. Standard-View Standard-nézet - - Stereo red/green - Sztereó piros/zöld - - - Switch stereo viewing to red/green - Sztereó nézet váltása: piros/zöld - Stereo red/cyan - + Stereo red/cyan Switch stereo viewing to red/cyan - + Switch stereo viewing to red/cyan @@ -6248,11 +6218,11 @@ You either have to finish or cancel the editing in the task panel. FreeCAD-VR - + FreeCAD-VR Extend the FreeCAD 3D Window to a Oculus Rift - + Extend the FreeCAD 3D Window to a Oculus Rift @@ -6278,7 +6248,7 @@ You either have to finish or cancel the editing in the task panel. &Windows... - Ablakok &W... + Ablakok Windows list @@ -6408,13 +6378,12 @@ You either have to finish or cancel the editing in the task panel. Std_Delete Object dependencies - Object dependencies + Objektumfüggőségek This object is referenced by other objects and thus these objects might get broken. Are you sure to continue? - This object is referenced by other objects and thus these objects might get broken. -Are you sure to continue? + Erre az objektumra más objektumok hivatkoznak, és ezek tört objektumok lehetnek. Biztosan folytatja? @@ -6437,19 +6406,19 @@ Are you sure to continue? Flat lines - Flat lines + Sima vonalak Flat lines mode - Flat lines mode + Sima vonal mód Shaded - Shaded + Árnyékolt Shaded mode - Shaded mode + Árnyékolt mód Points @@ -6457,20 +6426,19 @@ Are you sure to continue? Points mode - Points mode + Pontozott mód Std_DuplicateSelection Object dependencies - Object dependencies + Objektumfüggőségek The selected objects have a dependency to unselected objects. Do you want to duplicate them, too? - The selected objects have a dependency to unselected objects. -Do you want to duplicate them, too? + A kijelölt objektumoknak függőségei vannak ki nem jelölt objektumokkal. Szeretné megkettőzni azokat is? @@ -6549,7 +6517,7 @@ Do you want to specify its installation path if it's already installed? &Help - Súgó &H + Súgó File diff --git a/src/Gui/Language/FreeCAD_it.qm b/src/Gui/Language/FreeCAD_it.qm index 19783da9ad..a73fdc0a4e 100644 Binary files a/src/Gui/Language/FreeCAD_it.qm and b/src/Gui/Language/FreeCAD_it.qm differ diff --git a/src/Gui/Language/FreeCAD_it.ts b/src/Gui/Language/FreeCAD_it.ts index de642f3059..daa1f0c2f1 100644 --- a/src/Gui/Language/FreeCAD_it.ts +++ b/src/Gui/Language/FreeCAD_it.ts @@ -98,7 +98,7 @@ Enable Translations - Abilita le traduzioni + Abilita le traslazioni Enable Rotations @@ -190,7 +190,7 @@ Move up - Spostare verso l'alto + Sposta verso l'alto Move down @@ -400,7 +400,7 @@ while doing a left or right click and move the mouse up or down Enable timer - Abilita timer + Abilita il timer s @@ -486,13 +486,9 @@ while doing a left or right click and move the mouse up or down Choose Icon Scegli Icona - - Add icons... - Aggiungi icone... - Icon folders... - + Cartella icone... @@ -503,7 +499,7 @@ while doing a left or right click and move the mouse up or down Setup Custom Macros - Configurare Macro Personali + Configura Macro Personali Macro: @@ -675,7 +671,7 @@ while doing a left or right click and move the mouse up or down Re&set All - Ri&pristina tutto + Ripri&stina tutto Alt+S @@ -744,7 +740,7 @@ Definire un'altra scorciatoia. <b>Move the selected item one level down.</b><p>This will also change the level of the parent item.</p> - <b>Sposta l'elemento selezionato un livello in basso.</b><p>Questo cambierà anche il livello degli elementi padre.</p> + <b>Sposta l'elemento selezionato un livello in basso.</b><p>Questo cambierà anche il livello degli elementi genitore.</p> Move left @@ -752,7 +748,7 @@ Definire un'altra scorciatoia. <b>Move the selected item one level up.</b><p>This will also change the level of the parent item.</p> - <b>Sposta l'elemento selezionato un livello in alto.</b><p>Questo cambierà anche il livello degli elementi padre.</p> + <b>Sposta l'elemento selezionato un livello in alto.</b><p>Questo cambierà anche il livello degli elementi genitore.</p> Move down @@ -764,11 +760,11 @@ Definire un'altra scorciatoia. Move up - Spostare verso l'alto + Sposta verso l'alto <b>Move the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - <b>Sposta l'elemento selezionato in alto.</b><p>L'elemento verrà spostato all'interno del livello di gerarchia.</p> + <b>Sposta in alto l'elemento selezionato.</b><p>L'elemento verrà spostato all'interno del livello di gerarchia.</p> New... @@ -943,87 +939,87 @@ Definire un'altra scorciatoia. Aluminium - + Alluminio Brass - + Ottone Bronze - + Bronzo Copper - + Rame Chrome - + Chrome Emerald - + Smeraldo Gold - + Oro Jade - + Giada Metalized - + Metallizzato Neon GNC - + Neon GNC Neon PHC - + Neon PHC Obsidian - + Ossidiana Pewter - + Peltro Plaster - + Intonaco Plastic - + Plastica Ruby - + Rubino Satin - + Raso Shiny plastic - + Plastica lucida Silver - + Argento Steel - + Acciaio Stone - + Pietra @@ -1066,7 +1062,7 @@ Definire un'altra scorciatoia. Display Items - Visualizzazione elementi + Visualizza gli elementi Family: @@ -1105,7 +1101,7 @@ Definire un'altra scorciatoia. Auto load module after start up: - Caricamento automatico del modulo dopo l'avvio: + Modulo da caricare automaticamente dopo l'avvio: Language @@ -1133,7 +1129,7 @@ Definire un'altra scorciatoia. Enable tiled background - Abilita sfondo a mosaico + Abilita lo sfondo a mosaico Style sheet: @@ -1261,7 +1257,7 @@ Il file esiste già. Gui::Dialog::DlgMacroRecord Macro recording - Registrazione macro + Registra macro Macro name: @@ -1396,7 +1392,7 @@ Specificare un'altra cartella. Gui::Dialog::DlgParameter Parameter Editor - Editor parametri + Editor dei parametri Save to disk @@ -1488,7 +1484,7 @@ Specificare un'altra cartella. &Last modified by: - &Ultima modifica effettuata da: + U&ltima modifica effettuata da: Created &by: @@ -1520,7 +1516,7 @@ Specificare un'altra cartella. License URL - Indirizzo licenza + URL licenza Open in browser @@ -1575,7 +1571,7 @@ Specificare un'altra cartella. No source is defined. - Nessuna fonte è definita. + Non è definita nessuna fonte. Empty destination @@ -1600,13 +1596,9 @@ Specificare un'altra cartella. No selection Nessuna selezione - - Please select an object of the list - Selezionare un oggetto dell'elenco - Please select an object from the list - + Selezionare un oggetto dell'elenco @@ -1621,7 +1613,7 @@ Specificare un'altra cartella. Record log messages - Registra messaggi di log + Registra i messaggi di log Record warnings @@ -1969,103 +1961,103 @@ Specificare un'altra cartella. Allow duplicate object labels in one document - Consente la duplicazione delle etichette degli oggetti in uno stesso documento + Consenti la duplicazione delle etichette degli oggetti in uno stesso documento Maximum Undo/Redo steps - Massimo numero di passaggi di Annulla/Modifica + Massimo numero di passaggi di Annulla/Ripeti Using Undo/Redo on documents - Utilizzo di Annulla/Ripeti sui documenti + Utilizza Annulla/Ripeti sui documenti Authoring and License - + Diritti d'autore e licenze Author name - + Nome autore <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> - + <html><head/> <body><p>Nome da utilizzare alla creazione dei documenti.</p><p>Lasciare vuoto per i lavori anonimi.</p><p>Inoltre è possibile utilizzare il modulo:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> If this is checked, the "Last modified by" field will be set when saving the file - + Se è selezionato, quando si salva il file viene impostato il campo "Ultima modifica da" Set on save - + Imposta su salva Company - + Azienda Default license - + Licenza di default The default license for new documents - + La licenza di default per i nuovi documenti All rights reserved - + Tutti i diritti riservati CreativeCommons Attribution - + Creative Commons Attribuzione CreativeCommons Attribution-ShareAlike - + Creative Commons Attribuzione-Condividi allo stesso modo CreativeCommons Attribution-NoDerivatives - + CreativeCommons Attribuzione - Non opere derivate CreativeCommons Attribution-NonCommercial - + Creative Commons Attribuzione - Non commerciale CreativeCommons Attribution-NonCommercial-ShareAlike - + Creative Commons Attribuzione - Non commerciale - Condividi allo stesso modo CreativeCommons Attribution-NonCommercial-NoDerivatives - + Creative Commons Attribuzione - Non commerciale - Non opere derivate Public Domain - + Dominio Pubblico FreeArt - + FreeArt Other - + Altro License URL - Indirizzo licenza + URL licenza An URL where the user can find more details about the license - + Un URL dove l'utente può trovare ulteriori dettagli sulla licenza http://en.wikipedia.org/wiki/All_rights_reserved - + http://it.wikipedia.org/wiki/Copyright The default company to use for new files - + L'azienda predefinita da utilizzare per i nuovi file @@ -2132,7 +2124,7 @@ Specificare un'altra cartella. Current line highlight - Evidenziazione di linea corrente + Evidenziare la linea corrente @@ -2161,10 +2153,6 @@ Specificare un'altra cartella. Black Nero - - Transparent - Trasparente - Image dimensions Dimensioni immagine @@ -2342,7 +2330,7 @@ Specificare un'altra cartella. Show script commands in python console - Mostra i comandi di script nella console Python + Mostra lo script dei comandi nella console Python Log all commands issued by menus to file: @@ -2409,7 +2397,7 @@ Specificare un'altra cartella. US customary (in/lb) - Consuetudinario statunitense (in/lb) + Us comune (in/lb) Number of decimals: @@ -2467,7 +2455,7 @@ Specificare un'altra cartella. &Show tips at start up - &Mostra i consigli all'avvio + Mo&stra i consigli all'avvio Alt+S @@ -2537,7 +2525,7 @@ Specificare un'altra cartella. There already exists a file called %1 in the current directory. Overwrite? - Esiste già un file chiamato %1 nella directory corrente. Si desidera sovrascrivere? + Nella directory corrente esiste già un file chiamato %1 . Si desidera sovrascriverlo? Unable to save the file %1: %2. @@ -2656,32 +2644,28 @@ Specificare un'altra cartella. Gui::Dialog::IconDialog - - Add icon - Aggiungi icona - Icon folders - + Cartelle di icone Add icon folder - + Aggiungere cartella icone Gui::Dialog::IconFolders Add or remove custom icon folders - + Aggiungere o rimuovere delle cartelle di icone personalizzate Remove folder - + Rimuovere la cartella Removing a folder only takes effect after an application restart. - + Rimuovere una cartella ha effetto solo dopo il riavvio di un'applicazione. @@ -2935,11 +2919,11 @@ Specificare un'altra cartella. Incorrect quantity - + Quantità non corretta There are input fields with incorrect input, please ensure valid placement values! - + Ci sono dei campi di input con valori errati, assicurarsi che i valori di posizionamento siano validi! @@ -3179,39 +3163,39 @@ Specificare un'altra cartella. Search - + Trova Searches object labels - + Cerca tra le etichette degli oggetti Clears the search field - + Vuota il campo di ricerca Select only - + Selezionare solo Selects only this object - + Seleziona solo questo oggetto Deselect - + Deseleziona Deselects this object - + Deseleziona questo oggetto Zoom fit - + Adatta alla finestra Selects and fits this object in the 3D window - + Seleziona e adatta l'oggetto alla finestra 3D Go to selection @@ -3219,7 +3203,7 @@ Specificare un'altra cartella. Selects and locates this object in the tree view - + Seleziona e individua l'oggetto nella struttura ad albero @@ -3237,7 +3221,7 @@ Specificare un'altra cartella. You tried to access the address %1 which is currently unavailable. Please make sure that the URL exists and try reloading the page. - Si è provato ad accedere all'indirizzo %1 che non è disponibile. Assicurarsi che quell'URL esista e provare a ricaricare la pagina. + Si è provato ad accedere all'indirizzo %1 che non è disponibile. Assicurarsi che questo URL esista e provare a ricaricare la pagina. Connecting to %1 @@ -3473,7 +3457,7 @@ Si desidera salvare le modifiche? Gui::LabelEditor List - + Elenco @@ -3558,7 +3542,7 @@ Si desidera salvare le modifiche? The selected objects have a dependency to unselected objects. Do you want to copy them, too? - Gli oggetti selezionati hanno una dipendenza rispetto agli oggetti non selezionati. Copiare anche questi? + Gli oggetti selezionati hanno una dipendenza in oggetti non selezionati. Copiare anche questi? @@ -3577,15 +3561,15 @@ Do you want to copy them, too? Please, select at least one point in the left and the right view - Seleziona almeno un punt0 nelle viste di sinistra e destra + Seleziona almeno un punto nelle viste di sinistra e di destra Please, select at least %1 points in the left and the right view - Seleziona almeno %1 punti nelle viste di sinistra e destra + Seleziona almeno %1 punti nelle viste di sinistra e di destra Please pick points in the left and right view - Specificare i punti nelle viste di destra e sinistra + Specificare i punti nelle viste di destra e di sinistra The alignment has finished @@ -3597,11 +3581,11 @@ Do you want to copy them, too? Too few points picked in the left view. At least %1 points are needed. - I punti raccolti nella vista sinistra sono troppo pochi. Sono necessari almeno %1 punti. + I punti selezionati nella vista di sinistra non sono sufficienti. Sono necessari almeno %1 punti. Too few points picked in the right view. At least %1 points are needed. - I punti raccolti nella vista destra sono troppo pochi. Sono necessari almeno %1 punti. + I punti selezionati nella vista di destra non sono sufficienti. Sono necessari almeno %1 punti. Different number of points picked in left and right view. @@ -3670,7 +3654,7 @@ How do you want to proceed? Clear list - + Cancella la lista @@ -4024,7 +4008,7 @@ Vuoi specificare un'altra cartella? Gui::TreeDockWidget Tree view - Visualizzazione Struttura + Struttura @@ -4190,14 +4174,14 @@ Vuoi specificare un'altra cartella? Input in line %1 is not a number - + Nella riga %1 non è stato inserito un numero QDockWidget Tree view - Visualizzazione Struttura + Struttura Property view @@ -4292,7 +4276,7 @@ Vuoi specificare un'altra cartella? A general error occurred while loading the workbench - Un errore generico è accaduto durante il caricamento dell'ambiente + Durante il caricamento dell'ambiente si è verificato un errore generico Save views... @@ -4432,10 +4416,6 @@ Vuoi continuare? Unsaved document Documento non salvato - - Save document before close? - Salvare il documento prima di chiudere? - Save Macro Salva macro @@ -4536,7 +4516,7 @@ Aprire una finestra browser e scrivere http://localhost:%1. Unable to load documentation. In order to load it Qt 4.4 or higher is required. Impossibile caricare la documentazione. -Per poterla caricare Qt 4.4 o superiore è necessario. +Per poterla caricare serve Qt 4.4 o superiore. %1 Help @@ -4553,7 +4533,7 @@ Per poterla caricare Qt 4.4 o superiore è necessario. Only one object selected. Please select two objects. Be aware the point where you click matters. - un solo oggetto selezionato. Si prega di selezionare due oggetti. + Un solo oggetto selezionato. Si prega di selezionare due oggetti. Prestare attenzione al punto dove si fa clic. @@ -4585,7 +4565,7 @@ Prestare attenzione al punto dove si fa clic. The document is in editing mode and thus cannot be closed for the moment. You either have to finish or cancel the editing in the task panel. - Il documento è in modalità modifica e quindi non può essere chiuso per il momento. E' necessario terminare o annullare la modifica nel pannello attività. + Attualmente il documento è in modalità modifica e quindi non può essere chiuso. E' necessario terminare o annullare la modifica nel pannello attività. Do you want to close this dialog? @@ -4593,11 +4573,11 @@ You either have to finish or cancel the editing in the task panel. Do you want to save your changes to document '%1' before closing? - + Si desidera salvare le modifiche apportate al documento '%1' prima di chiuderlo? If you don't save, your changes will be lost. - + Se non vengono salvate, le modifiche andranno perse. @@ -5375,11 +5355,11 @@ You either have to finish or cancel the editing in the task panel. Cannot open file - + Non è possibile aprire il file Loading the file %1 is not supported - + Il caricamento del file %1 non è supportato @@ -5761,7 +5741,7 @@ You either have to finish or cancel the editing in the task panel. Toggle navigation/Edit mode - Attiva/Disattiva modalità di spostamento o modifica + Attiva/Disattiva la modalità di spostamento o modifica Toggle between navigation and edit mode @@ -5780,7 +5760,7 @@ You either have to finish or cancel the editing in the task panel. Toggles visibility of all objects in the active document - Nascondi tutti gli oggetti nel documento attivo + Nascondi tutti gli oggetti del documento attivo @@ -6134,21 +6114,13 @@ You either have to finish or cancel the editing in the task panel. Standard-View Vista standard - - Stereo red/green - Stereo rosso/verde - - - Switch stereo viewing to red/green - Passa alla visualizzazione stereo rosso/verde - Stereo red/cyan - + Stereo rosso/ciano Switch stereo viewing to red/cyan - + Commuta la visualizzazione stereo in rosso/ciano @@ -6249,11 +6221,11 @@ You either have to finish or cancel the editing in the task panel. FreeCAD-VR - + FreeCAD-VR Extend the FreeCAD 3D Window to a Oculus Rift - + Estendere la finestra 3D di FreeCAD a Oculus Rift diff --git a/src/Gui/Language/FreeCAD_ja.qm b/src/Gui/Language/FreeCAD_ja.qm index 001fe7ddc1..efd37cdba7 100644 Binary files a/src/Gui/Language/FreeCAD_ja.qm and b/src/Gui/Language/FreeCAD_ja.qm differ diff --git a/src/Gui/Language/FreeCAD_ja.ts b/src/Gui/Language/FreeCAD_ja.ts index d1ad8f21f9..c64534b5bf 100644 --- a/src/Gui/Language/FreeCAD_ja.ts +++ b/src/Gui/Language/FreeCAD_ja.ts @@ -338,7 +338,7 @@ while doing a left or right click and move the mouse up or down Flip - Flip + 反転 Offset @@ -487,13 +487,9 @@ while doing a left or right click and move the mouse up or down Choose Icon アイコンを選択 - - Add icons... - アイコンを追加... - Icon folders... - + アイコンフォルダー… @@ -944,87 +940,87 @@ Please define another shortcut. Aluminium - + アルミニウム Brass - + 真鍮 Bronze - + 青銅 Copper - + 銅 Chrome - + クロム Emerald - + エメラルド Gold - + 金 Jade - + 翡翠 Metalized - + 金属化 Neon GNC - + ネオンGNC Neon PHC - + ネオンPHC Obsidian - + 黒曜石 Pewter - + 白目 Plaster - + 石膏 Plastic - + プラスチック Ruby - + ルビー Satin - + サテン Shiny plastic - + 光沢のあるプラスチック Silver - + 銀 Steel - + 鋼材 Stone - + 石 @@ -1599,13 +1595,9 @@ Specify another directory, please. No selection 選択されていません - - Please select an object of the list - Please select an object of the list - Please select an object from the list - + リスト上のオブジェクトを選択してください。 @@ -1979,75 +1971,75 @@ Specify another directory, please. Authoring and License - + 著作とライセンス Author name - + 作成者 <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> - + <html><head/><body><p>名前はドキュメント作成に用いられます。</p><p>空欄のままだと匿名。</p><p>また、フォームを使用することもできます：</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> If this is checked, the "Last modified by" field will be set when saving the file - + チェックするとファイル保存時に「最終更新者」フィールドがセットされます Set on save - + 保存時にセット Company - + 会社 Default license - + 既定のライセンス The default license for new documents - + 新規ドキュメントにおける既定ライセンス All rights reserved - + 著作権表示 CreativeCommons Attribution - + クリエイティブコモンズ（帰属の表示） CreativeCommons Attribution-ShareAlike - + クリエイティブコモンズ（帰属の継承） CreativeCommons Attribution-NoDerivatives - + クリエイティブコモンズ（帰属と改変禁止） CreativeCommons Attribution-NonCommercial - + クリエイティブコモンズ（非営利のみに限定） CreativeCommons Attribution-NonCommercial-ShareAlike - + クリエイティブコモンズ（帰属表示と非営利に限定した許諾） CreativeCommons Attribution-NonCommercial-NoDerivatives - + クリエイティブコモンズ（帰属表示と非営利限定および改変禁止） Public Domain - + パブリック・ドメイン FreeArt - + 自由芸術ライセンス Other - + その他 License URL @@ -2055,15 +2047,15 @@ Specify another directory, please. An URL where the user can find more details about the license - + 利用者がライセンスに関する詳細を確認できるURL http://en.wikipedia.org/wiki/All_rights_reserved - + http://ja.wikipedia.org/wiki/%E8%91%97%E4%BD%9C%E6%A8%A9%E8%A1%A8%E7%A4%BA The default company to use for new files - + 新規ファイルに使用する規定の会社名 @@ -2159,10 +2151,6 @@ Specify another directory, please. Black 黒 - - Transparent - 透明 - Image dimensions 画像の寸法 @@ -2391,7 +2379,7 @@ Specify another directory, please. MKS (m/kg/s/degree) - Mks 単位系 (m/kg/s/度) + MKS 単位系 (m/kg/s/度) Magnitude @@ -2407,7 +2395,7 @@ Specify another directory, please. US customary (in/lb) - 米国単位系 (in/lb) + 米インチ・ポンド法 (in/lb) Number of decimals: @@ -2655,32 +2643,28 @@ Specify another directory, please. Gui::Dialog::IconDialog - - Add icon - アイコンを追加 - Icon folders - + アイコンフォルダー Add icon folder - + アイコンフォルダーを追加 Gui::Dialog::IconFolders Add or remove custom icon folders - + カスタムアイコンのフォルダーの追加または削除 Remove folder - + フォルダーを削除 Removing a folder only takes effect after an application restart. - + フォルダーの削除はアプリケーション再起動後に反映されます。 @@ -2934,11 +2918,11 @@ Specify another directory, please. Incorrect quantity - + 不適切な数値です There are input fields with incorrect input, please ensure valid placement values! - + 入力欄に不適切な入力がされています。適切な位置かどうか確認してください！ @@ -3178,39 +3162,39 @@ Specify another directory, please. Search - + 検索　 Searches object labels - + オブジェクトラベルの検索 Clears the search field - + 検索入力欄をクリア Select only - + 選択のみ Selects only this object - + このオブジェクトのみ選択 Deselect - + 選択を解除 Deselects this object - + このオブジェクトの選択を解除 Zoom fit - + ズームフィット Selects and fits this object in the 3D window - + 3Dウィンドウでこのオブジェクトを選択してフィット Go to selection @@ -3218,7 +3202,7 @@ Specify another directory, please. Selects and locates this object in the tree view - + ツリービューでこのオブジェクトを選択して配置 @@ -3445,7 +3429,7 @@ Do you want to save your changes? Save value - Save value + 値を保存 @@ -3471,7 +3455,7 @@ Do you want to save your changes? Gui::LabelEditor List - + リスト @@ -3662,11 +3646,11 @@ How do you want to proceed? Save value - Save value + 値を保存 Clear list - + リストをクリア @@ -4095,7 +4079,7 @@ Do you want to specify another directory? <qt>Connect to proxy "%1" using:</qt> - <qt>プロキシ "%1" を使用してへの接続：</qt> + <qt>以下を使用してプロキシ "%1" へ接続：</qt> @@ -4185,7 +4169,7 @@ Do you want to specify another directory? Input in line %1 is not a number - + 行 %1 の入力が数値ではありません @@ -4427,10 +4411,6 @@ Do you want to continue? Unsaved document 未保存のドキュメント - - Save document before close? - 閉じる前にドキュメントを保存しますか？ - Save Macro マクロを保存します。 @@ -4585,11 +4565,11 @@ You either have to finish or cancel the editing in the task panel. Do you want to save your changes to document '%1' before closing? - + 閉じる前にドキュメント '%1' に変更を保存しますか？ If you don't save, your changes will be lost. - + 保存しない場合、変更内容は失われます。 @@ -5314,7 +5294,7 @@ You either have to finish or cancel the editing in the task panel. Unnamed - 名称未設定 + MeishoMisette @@ -5367,11 +5347,11 @@ You either have to finish or cancel the editing in the task panel. Cannot open file - + ファイルを開くことができません Loading the file %1 is not supported - + ファイル %1 の読み込みはサポートされていません @@ -6126,21 +6106,13 @@ You either have to finish or cancel the editing in the task panel. Standard-View 標準ビュー - - Stereo red/green - 赤/緑でステレオ表示 - - - Switch stereo viewing to red/green - ステレオビューを赤/緑の表示に切り替え - Stereo red/cyan - + ステレオ 赤/シアン Switch stereo viewing to red/cyan - + 赤/シアン ステレオ表示切り替え @@ -6241,11 +6213,11 @@ You either have to finish or cancel the editing in the task panel. FreeCAD-VR - + FreeCAD-VR Extend the FreeCAD 3D Window to a Oculus Rift - + FreeCAD 3DウィンドウをOculus Rift用に拡張 diff --git a/src/Gui/Language/FreeCAD_nl.qm b/src/Gui/Language/FreeCAD_nl.qm index d49030d51c..b8a9acd806 100644 Binary files a/src/Gui/Language/FreeCAD_nl.qm and b/src/Gui/Language/FreeCAD_nl.qm differ diff --git a/src/Gui/Language/FreeCAD_nl.ts b/src/Gui/Language/FreeCAD_nl.ts index e3f62441c5..8b27766843 100644 --- a/src/Gui/Language/FreeCAD_nl.ts +++ b/src/Gui/Language/FreeCAD_nl.ts @@ -129,7 +129,7 @@ as: - as: + als: => @@ -160,7 +160,7 @@ Filename - Filename + Bestandsnaam @@ -470,7 +470,7 @@ while doing a left or right click and move the mouse up or down Username: - Username: + Gebruikersnaam: Site: @@ -487,13 +487,9 @@ while doing a left or right click and move the mouse up or down Choose Icon Pictogram kiezen - - Add icons... - Pictogrammen toevoegen ... - Icon folders... - + Icon folders... @@ -943,87 +939,87 @@ Gelieve een andere snelkoppeling te kiezen. Aluminium - + Aluminium Brass - + Brons Bronze - + Bronze Copper - + Koper Chrome - + Chroom Emerald - + Smaragd Gold - + Goud Jade - + Jade Metalized - + Metalized Neon GNC - + Neon GNC Neon PHC - + Neon PHC Obsidian - + Obsidiaan Pewter - + Pewter Plaster - + Plaster Plastic - + Plastic Ruby - + Robijn Satin - + Satin Shiny plastic - + Shiny plastic Silver - + Silver Steel - + Staal Stone - + Steen @@ -1598,13 +1594,9 @@ Kies een andere map, alstublieft. No selection Geen selectie - - Please select an object of the list - Please select an object of the list - Please select an object from the list - + Please select an object from the list @@ -1978,75 +1970,75 @@ Kies een andere map, alstublieft. Authoring and License - + Authoring and License Author name - + Author name <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> - + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> If this is checked, the "Last modified by" field will be set when saving the file - + If this is checked, the "Last modified by" field will be set when saving the file Set on save - + Set on save Company - + Bedrijf Default license - + Default license The default license for new documents - + The default license for new documents All rights reserved - + All rights reserved CreativeCommons Attribution - + CreativeCommons Attribution CreativeCommons Attribution-ShareAlike - + CreativeCommons Attribution-ShareAlike CreativeCommons Attribution-NoDerivatives - + CreativeCommons Attribution-NoDerivatives CreativeCommons Attribution-NonCommercial - + CreativeCommons Attribution-NonCommercial CreativeCommons Attribution-NonCommercial-ShareAlike - + CreativeCommons Attribution-NonCommercial-ShareAlike CreativeCommons Attribution-NonCommercial-NoDerivatives - + CreativeCommons Attribution-NonCommercial-NoDerivatives Public Domain - + Public Domain FreeArt - + FreeArt Other - + Other License URL @@ -2054,15 +2046,15 @@ Kies een andere map, alstublieft. An URL where the user can find more details about the license - + An URL where the user can find more details about the license http://en.wikipedia.org/wiki/All_rights_reserved - + http://en.wikipedia.org/wiki/All_rights_reserved The default company to use for new files - + The default company to use for new files @@ -2158,10 +2150,6 @@ Kies een andere map, alstublieft. Black Zwart - - Transparent - Transparant - Image dimensions Afbeeldings-afmetingen @@ -2564,7 +2552,7 @@ Kies een andere map, alstublieft. Gui::Dialog::DownloadItem Save File - Save File + Bestand opslaan Download canceled: %1 @@ -2580,27 +2568,27 @@ Kies een andere map, alstublieft. Error saving: %1 - Error saving: %1 + Fout bij het opslaan: %1 Network Error: %1 - Network Error: %1 + Netwerkfout: %1 seconds - seconds + seconden minutes - minutes + minuten - %4 %5 remaining - - %4 %5 remaining + - %4 %5 resterend %1 of %2 (%3/sec) %4 - %1 of %2 (%3/sec) %4 + %1 van %2 (%3/sec) %4 ? @@ -2608,7 +2596,7 @@ Kies een andere map, alstublieft. %1 of %2 - Stopped - %1 of %2 - Stopped + %1 van %2 - Gestopt bytes @@ -2639,45 +2627,41 @@ Kies een andere map, alstublieft. Download Manager - Download Manager + Downloadbeheer 1 Download - 1 Download + 1 download %1 Downloads - %1 Downloads + %1 downloads Gui::Dialog::IconDialog - - Add icon - Pictogram toevoegen - Icon folders - + Icon folders Add icon folder - + Add icon folder Gui::Dialog::IconFolders Add or remove custom icon folders - + Add or remove custom icon folders Remove folder - + Remove folder Removing a folder only takes effect after an application restart. - + Removing a folder only takes effect after an application restart. @@ -2931,11 +2915,11 @@ Kies een andere map, alstublieft. Incorrect quantity - + Incorrect quantity There are input fields with incorrect input, please ensure valid placement values! - + There are input fields with incorrect input, please ensure valid placement values! @@ -3175,39 +3159,39 @@ Kies een andere map, alstublieft. Search - + Zoeken Searches object labels - + Searches object labels Clears the search field - + Clears the search field Select only - + Select only Selects only this object - + Selects only this object Deselect - + Deselecteer Deselects this object - + Deselects this object Zoom fit - + Zoom fit Selects and fits this object in the 3D window - + Selects and fits this object in the 3D window Go to selection @@ -3215,7 +3199,7 @@ Kies een andere map, alstublieft. Selects and locates this object in the tree view - + Selects and locates this object in the tree view @@ -3406,27 +3390,27 @@ Wilt u uw wijzigingen opslaan? Gui::GraphvizView PNG format (*.png) - PNG format (*.png) + PNG-formaat (*.png) Bitmap format (*.bmp) - Bitmap format (*.bmp) + Bitmap-formaat (*.bmp) GIF format (*.gif) - GIF format (*.gif) + GIF-formaat (*.gif) JPG format (*.jpg) - JPG format (*.jpg) + JPG-formaat (*.jpg) SVG format (*.svg) - SVG format (*.svg) + SVG-formaat (*.svg) PDF format (*.pdf) - PDF format (*.pdf) + PDF-formaat (*.pdf) Export graph @@ -3441,7 +3425,7 @@ Wilt u uw wijzigingen opslaan? Save value - Save value + Waarde opslaan @@ -3467,7 +3451,7 @@ Wilt u uw wijzigingen opslaan? Gui::LabelEditor List - + List @@ -3661,11 +3645,11 @@ How do you want to proceed? Save value - Save value + Waarde opslaan Clear list - + Clear list @@ -3702,7 +3686,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel Edit... - Edit... + Bewerken... @@ -4182,7 +4166,7 @@ Wilt u een andere map opgeven? Input in line %1 is not a number - + Input in line %1 is not a number @@ -4423,10 +4407,6 @@ Do you want to continue? Unsaved document Niet-opgeslagen document - - Save document before close? - Document opslaan voor het sluiten? - Save Macro Macro opslaan @@ -4583,11 +4563,11 @@ You either have to finish or cancel the editing in the task panel. Do you want to save your changes to document '%1' before closing? - + Do you want to save your changes to document '%1' before closing? If you don't save, your changes will be lost. - + If you don't save, your changes will be lost. @@ -5060,7 +5040,7 @@ You either have to finish or cancel the editing in the task panel. The FreeCAD Forum - The FreeCAD Forum + Het FreeCAD Forum @@ -5365,11 +5345,11 @@ You either have to finish or cancel the editing in the task panel. Cannot open file - + Cannot open file Loading the file %1 is not supported - + Loading the file %1 is not supported @@ -6124,21 +6104,13 @@ You either have to finish or cancel the editing in the task panel. Standard-View Standaardweergave - - Stereo red/green - Stereo rood/groen - - - Switch stereo viewing to red/green - Stereo weergave overschakelen naar rood/groen - Stereo red/cyan - + Stereo red/cyan Switch stereo viewing to red/cyan - + Switch stereo viewing to red/cyan @@ -6239,11 +6211,11 @@ You either have to finish or cancel the editing in the task panel. FreeCAD-VR - + FreeCAD-VR Extend the FreeCAD 3D Window to a Oculus Rift - + Extend the FreeCAD 3D Window to a Oculus Rift diff --git a/src/Gui/Language/FreeCAD_no.qm b/src/Gui/Language/FreeCAD_no.qm index d8a29ac3ec..c33592322c 100644 Binary files a/src/Gui/Language/FreeCAD_no.qm and b/src/Gui/Language/FreeCAD_no.qm differ diff --git a/src/Gui/Language/FreeCAD_no.ts b/src/Gui/Language/FreeCAD_no.ts index 7bf1379bc4..2483aa72ca 100644 --- a/src/Gui/Language/FreeCAD_no.ts +++ b/src/Gui/Language/FreeCAD_no.ts @@ -363,7 +363,7 @@ while doing a left or right click and move the mouse up or down Adjust to view direction - Adjust to view direction + Juster til 3d-visnings retning Direction @@ -487,13 +487,9 @@ while doing a left or right click and move the mouse up or down Choose Icon Velg ikon - - Add icons... - Legge til ikoner... - Icon folders... - + Icon folders... @@ -942,87 +938,87 @@ Please define another shortcut. Aluminium - + Aluminium Brass - + Brass Bronze - + Bronze Copper - + Copper Chrome - + Chrome Emerald - + Emerald Gold - + Gold Jade - + Jade Metalized - + Metalized Neon GNC - + Neon GNC Neon PHC - + Neon PHC Obsidian - + Obsidian Pewter - + Pewter Plaster - + Plaster Plastic - + Plastic Ruby - + Ruby Satin - + Satin Shiny plastic - + Shiny plastic Silver - + Silver Steel - + Steel Stone - + Stone @@ -1598,13 +1594,9 @@ Vennligst angi en annen mappe. No selection Ingen valg - - Please select an object of the list - Please select an object of the list - Please select an object from the list - + Please select an object from the list @@ -1979,75 +1971,75 @@ Vennligst angi en annen mappe. Authoring and License - + Authoring and License Author name - + Author name <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> - + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> If this is checked, the "Last modified by" field will be set when saving the file - + If this is checked, the "Last modified by" field will be set when saving the file Set on save - + Set on save Company - + Firma Default license - + Default license The default license for new documents - + The default license for new documents All rights reserved - + Alle rettigheter forbeholdt CreativeCommons Attribution - + CreativeCommons Attribution CreativeCommons Attribution-ShareAlike - + CreativeCommons Attribution-ShareAlike CreativeCommons Attribution-NoDerivatives - + CreativeCommons Attribution-NoDerivatives CreativeCommons Attribution-NonCommercial - + CreativeCommons Attribution-NonCommercial CreativeCommons Attribution-NonCommercial-ShareAlike - + CreativeCommons Attribution-NonCommercial-ShareAlike CreativeCommons Attribution-NonCommercial-NoDerivatives - + CreativeCommons Attribution-NonCommercial-NoDerivatives Public Domain - + Public Domain FreeArt - + FreeArt Other - + Other License URL @@ -2055,15 +2047,15 @@ Vennligst angi en annen mappe. An URL where the user can find more details about the license - + An URL where the user can find more details about the license http://en.wikipedia.org/wiki/All_rights_reserved - + http://en.wikipedia.org/wiki/All_rights_reserved The default company to use for new files - + The default company to use for new files @@ -2159,10 +2151,6 @@ Vennligst angi en annen mappe. Black Svart - - Transparent - Gjennomsiktig - Image dimensions Bildedimensjoner @@ -2653,32 +2641,28 @@ Vennligst angi en annen mappe. Gui::Dialog::IconDialog - - Add icon - Add icon - Icon folders - + Icon folders Add icon folder - + Legg til ikon mappe Gui::Dialog::IconFolders Add or remove custom icon folders - + Legg til eller fjern tilpassede ikon mapper Remove folder - + Remove folder Removing a folder only takes effect after an application restart. - + Removing a folder only takes effect after an application restart. @@ -2932,11 +2916,11 @@ Vennligst angi en annen mappe. Incorrect quantity - + Incorrect quantity There are input fields with incorrect input, please ensure valid placement values! - + There are input fields with incorrect input, please ensure valid placement values! @@ -3176,39 +3160,39 @@ Vennligst angi en annen mappe. Search - + Search Searches object labels - + Searches object labels Clears the search field - + Clears the search field Select only - + Select only Selects only this object - + Selects only this object Deselect - + Velg bort Deselects this object - + Deselects this object Zoom fit - + Zoom fit Selects and fits this object in the 3D window - + Selects and fits this object in the 3D window Go to selection @@ -3216,7 +3200,7 @@ Vennligst angi en annen mappe. Selects and locates this object in the tree view - + Selects and locates this object in the tree view @@ -3469,7 +3453,7 @@ Vil du lagre endringene? Gui::LabelEditor List - + List @@ -3570,7 +3554,7 @@ Do you want to copy them, too? Alignment[*] - Alignment[*] + Justering [*] Please, select at least one point in the left and the right view @@ -3628,7 +3612,7 @@ How do you want to proceed? Abort - Abort + Avbryt Different number of points picked in left and right view. On the left view %1 points are picked, on the right view %2 points are picked. @@ -3667,7 +3651,7 @@ How do you want to proceed? Clear list - + Clear list @@ -4187,7 +4171,7 @@ Vil du angi en annen mappe? Input in line %1 is not a number - + Input in line %1 is not a number @@ -4428,10 +4412,6 @@ Do you want to continue? Unsaved document Ulagret dokument - - Save document before close? - Lagre dokument før det lukkes? - Save Macro Lagre makro @@ -4586,11 +4566,11 @@ You either have to finish or cancel the editing in the task panel. Do you want to save your changes to document '%1' before closing? - + Do you want to save your changes to document '%1' before closing? If you don't save, your changes will be lost. - + If you don't save, your changes will be lost. @@ -5368,11 +5348,11 @@ You either have to finish or cancel the editing in the task panel. Cannot open file - + Cannot open file Loading the file %1 is not supported - + Loading the file %1 is not supported @@ -6127,21 +6107,13 @@ You either have to finish or cancel the editing in the task panel. Standard-View Standardvisning - - Stereo red/green - Stereo rød/ grønn - - - Switch stereo viewing to red/green - Bytt stereovisning til rød/ grønn - Stereo red/cyan - + Stereo red/cyan Switch stereo viewing to red/cyan - + Switch stereo viewing to red/cyan @@ -6242,11 +6214,11 @@ You either have to finish or cancel the editing in the task panel. FreeCAD-VR - + FreeCAD-VR Extend the FreeCAD 3D Window to a Oculus Rift - + Extend the FreeCAD 3D Window to a Oculus Rift diff --git a/src/Gui/Language/FreeCAD_pl.qm b/src/Gui/Language/FreeCAD_pl.qm index c189163f36..0776936800 100644 Binary files a/src/Gui/Language/FreeCAD_pl.qm and b/src/Gui/Language/FreeCAD_pl.qm differ diff --git a/src/Gui/Language/FreeCAD_pl.ts b/src/Gui/Language/FreeCAD_pl.ts index ebea9a6925..6adc0680a4 100644 --- a/src/Gui/Language/FreeCAD_pl.ts +++ b/src/Gui/Language/FreeCAD_pl.ts @@ -60,22 +60,22 @@ CmdViewMeasureClearAll Measure - Measure + Pomiary Clear measurement - Clear measurement + Wyczyść pomiar CmdViewMeasureToggleAll Measure - Measure + Pomiary Toggle measurement - Toggle measurement + Włącz/wyłącz pomiary @@ -125,11 +125,11 @@ DlgUnitCalculator Units calculator - Units calculator + Kalkulator jednostek as: - as: + jako: => @@ -160,7 +160,7 @@ Filename - Filename + Nazwa pliku @@ -239,13 +239,12 @@ Press middle and left or right mouse button - Press middle and left or right mouse button + Naciśnij środkowy i lewy lub prawy przycisk myszki Scroll middle mouse button or keep middle button pressed while doing a left or right click and move the mouse up or down - Scroll middle mouse button or keep middle button pressed -while doing a left or right click and move the mouse up or down + Przewiń środkowy przycisk myszy, albo trzymaj wciśnięty środkowy przycisk myszy podczas kliknięcia lewym lub prawym klawiszem myszy i porusz myszą w górę lub dół @@ -313,7 +312,7 @@ while doing a left or right click and move the mouse up or down Word size - Word size + Wielkość słowa @@ -331,15 +330,15 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::Clipping Clipping - Clipping + Utnij Clipping X - Clipping X + Utnij względem X Flip - Flip + Obróć Offset @@ -347,15 +346,15 @@ while doing a left or right click and move the mouse up or down Clipping Y - Clipping Y + Utnij względem Y Clipping Z - Clipping Z + Utnij względem Z Clipping custom direction - Clipping custom direction + Utnij względem dowolnego kierunku View @@ -363,7 +362,7 @@ while doing a left or right click and move the mouse up or down Adjust to view direction - Adjust to view direction + Dostosuj do kierunku wyświetlania Direction @@ -470,15 +469,15 @@ while doing a left or right click and move the mouse up or down Username: - Username: + Nazwa Użytkownika: Site: - Site: + Strona: %1 at %2 - %1 at %2 + %1 na %2 @@ -487,13 +486,9 @@ while doing a left or right click and move the mouse up or down Choose Icon Wybierz ikonę - - Add icons... - Dodaj ikony... - Icon folders... - + Folder ikon... @@ -942,87 +937,87 @@ Please define another shortcut. Aluminium - + Aluminium  Brass - + Mosiądz Bronze - + Brąz Copper - + Miedź Chrome - + Chrom Emerald - + Szmaragd Gold - + Złoto Jade - + Jadeit Metalized - + Metalizowany Neon GNC - + Neon GNC Neon PHC - + Neon PHC Obsidian - + Obsydian Pewter - + Stop cyny Plaster - + Tynk Plastic - + Plastik Ruby - + Rubin Satin - + Satyna Shiny plastic - + Błyszczące tworzywa sztuczne Silver - + Srebro Steel - + Stal Stone - + Kamień @@ -1132,11 +1127,11 @@ Please define another shortcut. Enable tiled background - Enable tiled background + Aktywuj kafle w tle Style sheet: - Style sheet: + Styl arkuszu: @@ -1159,7 +1154,7 @@ Please define another shortcut. No style sheet - No style sheet + Brak stylu arkuszu @@ -1314,7 +1309,7 @@ This file already exists. You have no write permission for the directory. Please, choose another one. - You have no write permission for the directory. Please, choose another one. + Nie masz uprawnień zapisu do katalogu. Proszę wybrać inny. @@ -1509,19 +1504,19 @@ Specify another directory, please. UUID: - UUID: + Numer UUID: License information: - License information: + Informacje o licencji: License URL - License URL + URL licencji Open in browser - Open in browser + Otwórz w przeglądarce @@ -1591,19 +1586,15 @@ Specify another directory, please. Show all object types - Show all object types + Pokaż wszystkie typy obiektów No selection Brak wyboru - - Please select an object of the list - Please select an object of the list - Please select an object from the list - + Please select an object from the list @@ -1784,7 +1775,7 @@ Specify another directory, please. Anti-Aliasing - Anti-Aliasing + Wygładzanie None @@ -1792,19 +1783,19 @@ Specify another directory, please. Line Smoothing - Line Smoothing + Wygładzanie linii MSAA 2x - MSAA 2x + MSAA 2 x MSAA 4x - MSAA 4x + MSAA 4 x MSAA 8x - MSAA 8x + MSAA 8 x @@ -1977,91 +1968,91 @@ Specify another directory, please. Authoring and License - + Authoring and License Author name - + Nazwa autora <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> - + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> If this is checked, the "Last modified by" field will be set when saving the file - + If this is checked, the "Last modified by" field will be set when saving the file Set on save - + Ustaw przy zapisywaniu Company - + Company Default license - + Licencja domyślna The default license for new documents - + The default license for new documents All rights reserved - + Wszystkie prawa zastrzeżone CreativeCommons Attribution - + CreativeCommons Attribution CreativeCommons Attribution-ShareAlike - + CreativeCommons Attribution-ShareAlike CreativeCommons Attribution-NoDerivatives - + CreativeCommons Attribution-NoDerivatives CreativeCommons Attribution-NonCommercial - + CreativeCommons Attribution-NonCommercial CreativeCommons Attribution-NonCommercial-ShareAlike - + CreativeCommons Attribution-NonCommercial-ShareAlike CreativeCommons Attribution-NonCommercial-NoDerivatives - + CreativeCommons Attribution-NonCommercial-NoDerivatives Public Domain - + Domena Publiczna FreeArt - + FreeArt Other - + Inne License URL - License URL + URL licencji An URL where the user can find more details about the license - + An URL where the user can find more details about the license http://en.wikipedia.org/wiki/All_rights_reserved - + http://en.wikipedia.org/wiki/All_rights_reserved The default company to use for new files - + The default company to use for new files @@ -2157,10 +2148,6 @@ Specify another directory, please. Black Czarny - - Transparent - Przezroczysty - Image dimensions Wymiary obrazu @@ -2405,15 +2392,15 @@ Specify another directory, please. US customary (in/lb) - US customary (in/lb) + US zwyczajowe (in/lb) Number of decimals: - Number of decimals: + Ilość miejsc dziesiętnych: Imperial decimal (in/lb) - Imperial decimal (in/lb) + Jednostki imperialne (in/lb) @@ -2507,7 +2494,7 @@ Specify another directory, please. Gui::Dialog::DlgUnitsCalculator Unit mismatch - Unit mismatch + Niezgodność jednostek @@ -2557,50 +2544,50 @@ Specify another directory, please. %1 at %2 - %1 at %2 + %1 na %2 Gui::Dialog::DownloadItem Save File - Save File + Zapisz plik Download canceled: %1 - Download canceled: %1 + Pobieranie anulowane: %1 Open containing folder - Open containing folder + Otwórz folder zawierający Error opening save file: %1 - Error opening save file: %1 + Wystąpił błąd podczas zapisywania pliku: %1 Error saving: %1 - Error saving: %1 + Błąd zapisu: %1 Network Error: %1 - Network Error: %1 + Błąd połączenia sieciowego: %1 seconds - seconds + sekundy minutes - minutes + minuty - %4 %5 remaining - - %4 %5 remaining + -pozostało %4 %5 %1 of %2 (%3/sec) %4 - %1 of %2 (%3/sec) %4 + %1 %2 (%3/sek) %4 ? @@ -2608,11 +2595,11 @@ Specify another directory, please. %1 of %2 - Stopped - %1 of %2 - Stopped + %1 z %2 - Zatrzymany bytes - bytes + bajty kB @@ -2620,64 +2607,60 @@ Specify another directory, please. MB - MB + Mb Gui::Dialog::DownloadManager Downloads - Downloads + Pobrane pliki Clean up - Clean up + Oczyść 0 Items - 0 Items + 0 przedmiotów Download Manager - Download Manager + Menadżer pobierania plików 1 Download - 1 Download + 1 Pobierz %1 Downloads - %1 Downloads + %1 Pobrań Gui::Dialog::IconDialog - - Add icon - Dodaj ikonę - Icon folders - + Folder ikon Add icon folder - + Dodaj folder ikon Gui::Dialog::IconFolders Add or remove custom icon folders - + Add or remove custom icon folders Remove folder - + Usuń folder Removing a folder only takes effect after an application restart. - + Removing a folder only takes effect after an application restart. @@ -2931,11 +2914,11 @@ Specify another directory, please. Incorrect quantity - + Incorrect quantity There are input fields with incorrect input, please ensure valid placement values! - + There are input fields with incorrect input, please ensure valid placement values! @@ -3175,39 +3158,39 @@ Specify another directory, please. Search - + Szukaj Searches object labels - + Searches object labels Clears the search field - + Clears the search field Select only - + Select only Selects only this object - + Selects only this object Deselect - + odznacz Deselects this object - + Deselects this object Zoom fit - + Zoom fit Selects and fits this object in the 3D window - + Selects and fits this object in the 3D window Go to selection @@ -3215,7 +3198,7 @@ Specify another directory, please. Selects and locates this object in the tree view - + Selects and locates this object in the tree view @@ -3405,31 +3388,31 @@ Do you want to save your changes? Gui::GraphvizView PNG format (*.png) - PNG format (*.png) + Format PNG (*.png) Bitmap format (*.bmp) - Bitmap format (*.bmp) + Format mapy bitowej (*.bmp) GIF format (*.gif) - GIF format (*.gif) + Format GIF (*.gif) JPG format (*.jpg) - JPG format (*.jpg) + Format JPG (*.jpg) SVG format (*.svg) - SVG format (*.svg) + Format SVG (*.svg) PDF format (*.pdf) - PDF format (*.pdf) + Format PDF (*.pdf) Export graph - Export graph + Eksport wykresu @@ -3440,7 +3423,7 @@ Do you want to save your changes? Save value - Save value + Zapisz wartość @@ -3466,7 +3449,7 @@ Do you want to save your changes? Gui::LabelEditor List - + List @@ -3546,13 +3529,12 @@ Do you want to save your changes? Object dependencies - Object dependencies + Zależności obiektów The selected objects have a dependency to unselected objects. Do you want to copy them, too? - The selected objects have a dependency to unselected objects. -Do you want to copy them, too? + Wybrane obiekty mają zdefiniowane zależności do niewybranych obiektów. Czy chcesz je także skopiować? @@ -3640,7 +3622,7 @@ How do you want to proceed? No point was found on model - No point was found on model + Żaden punkt nie został znaleziony na modelu @@ -3660,11 +3642,11 @@ How do you want to proceed? Save value - Save value + Zapisz wartość Clear list - + Clear list @@ -3701,7 +3683,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel Edit... - Edit... + Edytuj... @@ -3913,11 +3895,11 @@ Do you want to specify another directory? Automatic python modules documentation - Automatic python modules documentation + Automatyczna dokumentacja modułów Pythona Opens a browser to show the Python modules documentation - Opens a browser to show the Python modules documentation + Otwórz przeglądarkę aby zobaczyć dokumentację modułów Pythona @@ -4006,7 +3988,7 @@ Do you want to specify another directory? Press CTRL and SHIFT buttons - Press CTRL and SHIFT buttons + Naciśnij CTRL i SHIFT @@ -4085,11 +4067,11 @@ Do you want to specify another directory? NetworkAccessManager <qt>Enter username and password for "%1" at %2</qt> - <qt>Enter username and password for "%1" at %2</qt> + <qt>Wprowadź nazwę użytkownika i hasło dla "%1" at %2</qt> <qt>Connect to proxy "%1" using:</qt> - <qt>Connect to proxy "%1" using:</qt> + <qt>Połączyć się z serwerem proxy "%1" za pomocą:</qt> @@ -4179,7 +4161,7 @@ Do you want to specify another directory? Input in line %1 is not a number - + Input in line %1 is not a number @@ -4420,10 +4402,6 @@ Do you want to continue? Unsaved document Niezapisany dokument - - Save document before close? - Zapisać dokument przed zamknięciem? - Save Macro Zapisz makro @@ -4576,11 +4554,11 @@ You either have to finish or cancel the editing in the task panel. Do you want to save your changes to document '%1' before closing? - + Do you want to save your changes to document '%1' before closing? If you don't save, your changes will be lost. - + If you don't save, your changes will be lost. @@ -5026,15 +5004,15 @@ You either have to finish or cancel the editing in the task panel. FreeCAD FAQ - FreeCAD FAQ + FAQ FreeCAD Frequently Asked Questions on the FreeCAD website - Frequently Asked Questions on the FreeCAD website + Najczęściej Zadawane Pytania na stronie FreeCAD (FAQ) Frequently Asked Questions - Frequently Asked Questions + Najczęściej Zadawane Pytania (FAQ) @@ -5045,15 +5023,15 @@ You either have to finish or cancel the editing in the task panel. FreeCAD Forum - FreeCAD Forum + Forum FreeCAD The FreeCAD forum, where you can find help from other users - The FreeCAD forum, where you can find help from other users + FreeCAD forum, gdzie można znaleźć pomoc od innych użytkowników The FreeCAD Forum - The FreeCAD Forum + Forum FreeCAD @@ -5064,15 +5042,15 @@ You either have to finish or cancel the editing in the task panel. Python scripting documentation - Python scripting documentation + Dokumentacja skryptów Python Python scripting documentation on the FreeCAD website - Python scripting documentation on the FreeCAD website + Dokumentacja skryptów Python na stronie FreeCAD PowerUsers documentation - PowerUsers documentation + Dokumentacja PowerUsers @@ -5083,11 +5061,11 @@ You either have to finish or cancel the editing in the task panel. Users documentation - Users documentation + Dokumentacja użytkowników Documentation for users on the FreeCAD website - Documentation for users on the FreeCAD website + Dokumentacja dla użytkowników na stronie FreeCAD @@ -5196,7 +5174,7 @@ You either have to finish or cancel the editing in the task panel. Step into - Step into + Wejść do @@ -5305,7 +5283,7 @@ You either have to finish or cancel the editing in the task panel. Unnamed - Unnamed + Nienazwany @@ -5358,11 +5336,11 @@ You either have to finish or cancel the editing in the task panel. Cannot open file - + Cannot open file Loading the file %1 is not supported - + Loading the file %1 is not supported @@ -5879,11 +5857,11 @@ You either have to finish or cancel the editing in the task panel. &Units calculator... - &Units calculator... + &Kalkulator jednostek... Start the units calculator - Start the units calculator + Uruchom kalkulator jednostek @@ -6117,21 +6095,13 @@ You either have to finish or cancel the editing in the task panel. Standard-View Normalny widok - - Stereo red/green - Stereo czerwony/zielony - - - Switch stereo viewing to red/green - Przełączyć wyświetlanie widoku czerwony/zielony - Stereo red/cyan - + Stereo red/cyan Switch stereo viewing to red/cyan - + Switch stereo viewing to red/cyan @@ -6232,11 +6202,11 @@ You either have to finish or cancel the editing in the task panel. FreeCAD-VR - + FreeCAD-VR Extend the FreeCAD 3D Window to a Oculus Rift - + Extend the FreeCAD 3D Window to a Oculus Rift @@ -6392,13 +6362,12 @@ You either have to finish or cancel the editing in the task panel. Std_Delete Object dependencies - Object dependencies + Zależności obiektów This object is referenced by other objects and thus these objects might get broken. Are you sure to continue? - This object is referenced by other objects and thus these objects might get broken. -Are you sure to continue? + Ten obiekt jest wywoływany przez inne obiekty i w ten sposób te obiekty mogą ulec zniszczeniu. Czy na pewno chcesz kontynuować? @@ -6421,19 +6390,19 @@ Are you sure to continue? Flat lines - Flat lines + Linie płaskie Flat lines mode - Flat lines mode + Tryb płaskiej linii Shaded - Shaded + Zacieniony Shaded mode - Shaded mode + Tryb cieniowania Points @@ -6441,20 +6410,19 @@ Are you sure to continue? Points mode - Points mode + Tryb punktów Std_DuplicateSelection Object dependencies - Object dependencies + Zależności obiektów The selected objects have a dependency to unselected objects. Do you want to duplicate them, too? - The selected objects have a dependency to unselected objects. -Do you want to duplicate them, too? + Wybrane obiekty mają zdefiniowane zależności do niewybranych obiektów. Czy chcesz je także zduplikować? diff --git a/src/Gui/Language/FreeCAD_pt-BR.qm b/src/Gui/Language/FreeCAD_pt-BR.qm index 329c67128b..59d0bee073 100644 Binary files a/src/Gui/Language/FreeCAD_pt-BR.qm and b/src/Gui/Language/FreeCAD_pt-BR.qm differ diff --git a/src/Gui/Language/FreeCAD_pt-BR.ts b/src/Gui/Language/FreeCAD_pt-BR.ts index 17396d1863..810f583612 100644 --- a/src/Gui/Language/FreeCAD_pt-BR.ts +++ b/src/Gui/Language/FreeCAD_pt-BR.ts @@ -487,13 +487,9 @@ while doing a left or right click and move the mouse up or down Choose Icon Escolher ícone - - Add icons... - Adicionar ícones ... - Icon folders... - + Pastas de ícones... @@ -943,87 +939,87 @@ Defina outro atalho. Aluminium - + Alumínio Brass - + Latão Bronze - + Bronze Copper - + Cobre Chrome - + Cromo Emerald - + Esmeralda Gold - + Ouro Jade - + Jade Metalized - + Metalizado Neon GNC - + Néon GNC Neon PHC - + Néon PHC Obsidian - + Obsidiana Pewter - + Estanho Plaster - + Gesso Plastic - + Plástico Ruby - + Rubi Satin - + Cetim Shiny plastic - + Plástico brilhante Silver - + Prata Steel - + Aço Stone - + Pedra @@ -1599,13 +1595,9 @@ Por favor especifique outro diretório. No selection Nenhuma seleção - - Please select an object of the list - Por favor, selecione um objeto de lista - Please select an object from the list - + Por favor, selecione um objeto de lista @@ -1979,75 +1971,75 @@ Por favor especifique outro diretório. Authoring and License - + Autoria e licença Author name - + Nome do autor <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> - + <html><head/> <body><p>O nome a ser usado na criação de documentos.</p><p>Manter em branco para anónimo.</p><p>Também pode usar a forma:</p><p>John Doe &lt; john@doe.com &gt;</p></body></html> If this is checked, the "Last modified by" field will be set when saving the file - + Se isto estiver marcado, o campo "Modificado por" será preenchido ao salvar o arquivo Set on save - + Salvar Company - + Empresa Default license - + Licença padrão The default license for new documents - + A licença padrão para novos documentos All rights reserved - + Todos os direitos reservados CreativeCommons Attribution - + CreativeCommons Atribuição CreativeCommons Attribution-ShareAlike - + CreativeCommons Atribuição-Compartilhalgual CreativeCommons Attribution-NoDerivatives - + CreativeCommons Atribuição-SemDerivações CreativeCommons Attribution-NonCommercial - + CreativeCommons Atribuição-NãoComercial CreativeCommons Attribution-NonCommercial-ShareAlike - + CreativeCommons Atribuição-NãoComercial-Compartilhalgual CreativeCommons Attribution-NonCommercial-NoDerivatives - + CreativeCommons Atribuição-NãoComercial-SemDerivações Public Domain - + Domínio público FreeArt - + FreeArt Other - + Outro License URL @@ -2055,15 +2047,15 @@ Por favor especifique outro diretório. An URL where the user can find more details about the license - + Uma URL onde o usuário pode encontrar mais detalhes sobre a licença http://en.wikipedia.org/wiki/All_rights_reserved - + http://en.wikipedia.org/wiki/All_rights_reserved The default company to use for new files - + O nome de empresa a ser usado para novos arquivos @@ -2159,10 +2151,6 @@ Por favor especifique outro diretório. Black Preto - - Transparent - Transparente - Image dimensions Dimensões da imagem @@ -2653,32 +2641,28 @@ Por favor especifique outro diretório. Gui::Dialog::IconDialog - - Add icon - Adicionar um ícone - Icon folders - + Pastas de ícones Add icon folder - + Adicionar uma pasta de ícones Gui::Dialog::IconFolders Add or remove custom icon folders - + Adicionar ou remover pastas de ícones personalizados Remove folder - + Remover pasta Removing a folder only takes effect after an application restart. - + Remover uma pasta só entrará em vigor depois de reiniciar o aplicativo. @@ -2932,11 +2916,11 @@ Por favor especifique outro diretório. Incorrect quantity - + Quantidade incorreta There are input fields with incorrect input, please ensure valid placement values! - + Existem campos com valor incorreto, por favor, certifique-se de usar valores de posicionamento válidos! @@ -3176,39 +3160,39 @@ Por favor especifique outro diretório. Search - + Pesquisar Searches object labels - + Pesquisar rótulos de objetos Clears the search field - + Limpa o campo de pesquisa Select only - + Selecionar somente este Selects only this object - + Seleciona apenas este objeto Deselect - + Deselecionar Deselects this object - + Deseleciona este objeto Zoom fit - + Enquadrar Selects and fits this object in the 3D window - + Seleciona e enquadra este objeto na janela 3D Go to selection @@ -3216,7 +3200,7 @@ Por favor especifique outro diretório. Selects and locates this object in the tree view - + Seleciona e localiza este objeto na árvore @@ -3469,7 +3453,7 @@ Deseja salvar as alterações? Gui::LabelEditor List - + Lista @@ -3666,7 +3650,7 @@ Você deseja continuar? Clear list - + Limpar lista @@ -4181,7 +4165,7 @@ Do you want to specify another directory? Input in line %1 is not a number - + A entrada na linha %1 não é um número @@ -4422,10 +4406,6 @@ Do you want to continue? Unsaved document Documento não salvo - - Save document before close? - Salvar o documento antes de fechar? - Save Macro Salvar macro @@ -4578,11 +4558,11 @@ You either have to finish or cancel the editing in the task panel. Do you want to save your changes to document '%1' before closing? - + Deseja salvar as alterações no documento '%1' antes de fechar? If you don't save, your changes will be lost. - + Se você não for salvar, suas alterações serão perdidas. @@ -5360,11 +5340,11 @@ You either have to finish or cancel the editing in the task panel. Cannot open file - + Não é possível abrir o arquivo Loading the file %1 is not supported - + Carregar o arquivo %1 não é suportado @@ -6119,21 +6099,13 @@ You either have to finish or cancel the editing in the task panel. Standard-View Vista padrão - - Stereo red/green - Estéreo vermelho/verde - - - Switch stereo viewing to red/green - Alternar visualização estéreo para vermelho/verde - Stereo red/cyan - + Estéreo vermelho/ciano Switch stereo viewing to red/cyan - + Alternar visualização estéreo vermelho/ciano @@ -6234,11 +6206,11 @@ You either have to finish or cancel the editing in the task panel. FreeCAD-VR - + FreeCAD-VR Extend the FreeCAD 3D Window to a Oculus Rift - + Estender a janela 3D FreeCAD para um Oculus Rift diff --git a/src/Gui/Language/FreeCAD_pt-PT.qm b/src/Gui/Language/FreeCAD_pt-PT.qm index 5674998d02..1d9859e9ed 100644 Binary files a/src/Gui/Language/FreeCAD_pt-PT.qm and b/src/Gui/Language/FreeCAD_pt-PT.qm differ diff --git a/src/Gui/Language/FreeCAD_pt-PT.ts b/src/Gui/Language/FreeCAD_pt-PT.ts index 961d8f95aa..ff73945072 100644 --- a/src/Gui/Language/FreeCAD_pt-PT.ts +++ b/src/Gui/Language/FreeCAD_pt-PT.ts @@ -212,7 +212,7 @@ Gui::BlenderNavigationStyle Press left mouse button - Press left mouse button + Pressione o botão esquerdo do rato Press SHIFT and middle mouse button @@ -224,14 +224,14 @@ Scroll middle mouse button - Scroll middle mouse button + Rode a roda do rato Gui::CADNavigationStyle Press left mouse button - Press left mouse button + Pressione o botão esquerdo do rato Press middle mouse button @@ -362,7 +362,7 @@ while doing a left or right click and move the mouse up or down Adjust to view direction - Adjust to view direction + Ajustar à direção da vista Direction @@ -396,7 +396,7 @@ while doing a left or right click and move the mouse up or down Fullscreen - Fullscreen + Ecrã inteiro Enable timer @@ -473,11 +473,11 @@ while doing a left or right click and move the mouse up or down Site: - Site: + Sítio: %1 at %2 - %1 at %2 + %1 para %2 @@ -486,13 +486,9 @@ while doing a left or right click and move the mouse up or down Choose Icon Escolher Ícone - - Add icons... - Adicionar Ícones ... - Icon folders... - + Icon folders... @@ -930,7 +926,7 @@ Please define another shortcut. Document window: - Document window: + Janela de documento: @@ -941,87 +937,87 @@ Please define another shortcut. Aluminium - + Alumínio Brass - + Latão Bronze - + Bronze Copper - + Cobre Chrome - + Crómio Emerald - + Esmeralda Gold - + Ouro Jade - + Jade Metalized - + Metalizado Neon GNC - + Néon GNC Neon PHC - + Néon PHC Obsidian - + Obsidiana Pewter - + Estanho Plaster - + Reboco Plastic - + Plástico Ruby - + Rubi Satin - + Satin Shiny plastic - + Plástico brilhante Silver - + Prata Steel - + Aço Stone - + Pedra @@ -1597,13 +1593,9 @@ Por favor, indique outra pasta. No selection Nenhuma seleção - - Please select an object of the list - Por favor, selecione um objeto da lista - Please select an object from the list - + Por favor, selecione um objeto da lista @@ -1842,7 +1834,7 @@ Por favor, indique outra pasta. Visibility - Visibility + Visibilidade Out g&rayed @@ -1874,7 +1866,7 @@ Por favor, indique outra pasta. &Flow - &Flow + &Fluxo Alt+F @@ -1977,75 +1969,75 @@ Por favor, indique outra pasta. Authoring and License - + Autoria e licença Author name - + Nome do autor <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> - + <html><head/> <body><p>nome para usar na criação de documentos.</p><p>Manter em branco para anónimo.</p><p>Também pode usar o formulário:</p><p>John Doe &lt; john@doe.com &gt;</p></body></html> If this is checked, the "Last modified by" field will be set when saving the file - + Se estiver marcado, o campo "Modificado por" será definido ao salvar o ficheiro Set on save - + Set on save Company - + Company Default license - + Licença padrão The default license for new documents - + The default license for new documents All rights reserved - + Todos os direitos reservados CreativeCommons Attribution - + CreativeCommons Attribution CreativeCommons Attribution-ShareAlike - + CreativeCommons Attribution-ShareAlike CreativeCommons Attribution-NoDerivatives - + CreativeCommons Attribution-NoDerivatives CreativeCommons Attribution-NonCommercial - + CreativeCommons Attribution-NonCommercial CreativeCommons Attribution-NonCommercial-ShareAlike - + CreativeCommons Attribution-NonCommercial-ShareAlike CreativeCommons Attribution-NonCommercial-NoDerivatives - + CreativeCommons Attribution-NonCommercial-NoDerivatives Public Domain - + Domínio público FreeArt - + FreeArt Other - + Other License URL @@ -2053,15 +2045,15 @@ Por favor, indique outra pasta. An URL where the user can find more details about the license - + An URL where the user can find more details about the license http://en.wikipedia.org/wiki/All_rights_reserved - + http://en.wikipedia.org/wiki/All_rights_reserved The default company to use for new files - + The default company to use for new files @@ -2096,7 +2088,7 @@ Por favor, indique outra pasta. String - String + Texto Character @@ -2128,7 +2120,7 @@ Por favor, indique outra pasta. Current line highlight - Current line highlight + Linha atual realçada @@ -2157,10 +2149,6 @@ Por favor, indique outra pasta. Black Preto - - Transparent - Transparente - Image dimensions Dimensões da Imagem @@ -2370,7 +2358,7 @@ Por favor, indique outra pasta. Run macros in local environment - Run macros in local environment + Executar macros no ambiente local @@ -2405,11 +2393,11 @@ Por favor, indique outra pasta. US customary (in/lb) - US customary (in/lb) + Padrão US (in/lb) Number of decimals: - Number of decimals: + Número de casas decimais: Imperial decimal (in/lb) @@ -2432,7 +2420,7 @@ Por favor, indique outra pasta. Enable preselection highlighting - Enable preselection highlighting + Habilitar preseleção realçada Background color @@ -2440,7 +2428,7 @@ Por favor, indique outra pasta. Middle color - Middle color + Cor intermédia Color gradient @@ -2495,19 +2483,18 @@ Por favor, indique outra pasta. Download failed: %1 - Download failed: %1 - + Download falhado: %1 If you want to learn more about FreeCAD you must go to %1 or press the Help item in the Help menu. - If you want to learn more about FreeCAD you must go to %1 or press the Help item in the Help menu. + Se quer aprender mais sobre o FreeCAD deve ir para %1 ou pressione o item de ajuda no menu ajuda. Gui::Dialog::DlgUnitsCalculator Unit mismatch - Unit mismatch + Incompatibilidade de unidades @@ -2533,11 +2520,11 @@ Por favor, indique outra pasta. There already exists a file called %1 in the current directory. Overwrite? - There already exists a file called %1 in the current directory. Overwrite? + Já existe um ficheiro chamado %1 neste diretório. Substituir? Unable to save the file %1: %2. - Unable to save the file %1: %2. + Não é possível salvar o ficheiro %1: %2. Downloading %1. @@ -2549,58 +2536,58 @@ Por favor, indique outra pasta. Download failed: %1. - Download failed: %1. + O download falhou: %1. Downloaded %1 to current directory. - Downloaded %1 to current directory. + %1 descarregado para o diretório atual. %1 at %2 - %1 at %2 + %1 para %2 Gui::Dialog::DownloadItem Save File - Save File + Salvar ficheiro Download canceled: %1 - Download canceled: %1 + Download cancelado: %1 Open containing folder - Open containing folder + Abrir a pasta Error opening save file: %1 - Error opening save file: %1 + Erro ao abrir, salvar o ficheiro: %1 Error saving: %1 - Error saving: %1 + Erro ao salvar: %1 Network Error: %1 - Network Error: %1 + Erro de rede: %1 seconds - seconds + segundos minutes - minutes + minutos - %4 %5 remaining - - %4 %5 remaining + -%4 %5 restantes %1 of %2 (%3/sec) %4 - %1 of %2 (%3/sec) %4 + %1 de %2 (%3/sec) %4 ? @@ -2608,7 +2595,7 @@ Por favor, indique outra pasta. %1 of %2 - Stopped - %1 of %2 - Stopped + %1 de %2 - parado bytes @@ -2620,71 +2607,67 @@ Por favor, indique outra pasta. MB - MB +  MB Gui::Dialog::DownloadManager Downloads - Downloads + Transferências Clean up - Clean up + Limpar 0 Items - 0 Items + 0 itens Download Manager - Download Manager + Gestor de transferências 1 Download - 1 Download + 1 transferência %1 Downloads - %1 Downloads + %1 transferências Gui::Dialog::IconDialog - - Add icon - Adicionar Ícone - Icon folders - + Pastas de ícone Add icon folder - + Adicionar pasta de ícones Gui::Dialog::IconFolders Add or remove custom icon folders - + Adicionar ou remover pastas de ícones personalizados Remove folder - + Remover pasta Removing a folder only takes effect after an application restart. - + Remover uma pasta só terá efeito depois de reiniciar o programa. Gui::Dialog::InputVector Input vector - Input vector + Vetor de entrada Vector @@ -2753,7 +2736,7 @@ Por favor, indique outra pasta. Rename group - Rename group + Renomear Grupo Export parameter @@ -2828,11 +2811,11 @@ Por favor, indique outra pasta. New integer item - New integer item + Novo item inteiro New unsigned item - New unsigned item + Novo item não atribuído (unsigned) New Boolean item @@ -2891,7 +2874,7 @@ Por favor, indique outra pasta. Pitch: - Pitch: + Altura: Roll: @@ -2931,11 +2914,11 @@ Por favor, indique outra pasta. Incorrect quantity - + Quantidade incorreta There are input fields with incorrect input, please ensure valid placement values! - + Existem campos com valor incorreto, por favor, certifique-se de usar valores de posicionamento válidos! @@ -3175,47 +3158,47 @@ Por favor, indique outra pasta. Search - + Procurar Searches object labels - + Procurar rótulos de objetos Clears the search field - + Limpa o campo de pesquisa Select only - + Selecione somente Selects only this object - + Seleciona apenas este objeto Deselect - + Deselect Deselects this object - + Desseleciona este objeto Zoom fit - + Zoom fit Selects and fits this object in the 3D window - + Selects and fits this object in the 3D window Go to selection - Go to selection + Ir para seleção Selects and locates this object in the tree view - + Seleciona e localiza este objeto na árvore @@ -3245,11 +3228,11 @@ Por favor, indique outra pasta. Reading from %1 - Reading from %1 + Lendo %1 Download failed: %1. - Download failed: %1. + O download falhou: %1. Previous @@ -3408,31 +3391,31 @@ Deseja guardar as suas alterações? Gui::GraphvizView PNG format (*.png) - PNG format (*.png) + Formato PNG (*. png) Bitmap format (*.bmp) - Bitmap format (*.bmp) + Formato bitmap (*. bmp) GIF format (*.gif) - GIF format (*.gif) + Formato GIF (*. gif) JPG format (*.jpg) - JPG format (*.jpg) + Formato JPG (*. jpg) SVG format (*.svg) - SVG format (*.svg) + Formato SVG (SVG) PDF format (*.pdf) - PDF format (*.pdf) + Formato PDF (*. pdf) Export graph - Export graph + Exportar gráfico @@ -3443,7 +3426,7 @@ Deseja guardar as suas alterações? Save value - Save value + Salvar o valor @@ -3458,18 +3441,18 @@ Deseja guardar as suas alterações? Press left mouse button - Press left mouse button + Pressione o botão esquerdo do rato Scroll middle mouse button - Scroll middle mouse button + Rode a roda do rato Gui::LabelEditor List - + Lista @@ -3480,7 +3463,7 @@ Deseja guardar as suas alterações? Direction must not be the null vector - Direction must not be the null vector + Direção não pode ser um vector nulo X @@ -3541,7 +3524,7 @@ Deseja guardar as suas alterações? Toggles this dockable window - Toggles this dockable window + Ativa/desativa esta janela encaixável Close All @@ -3549,13 +3532,12 @@ Deseja guardar as suas alterações? Object dependencies - Object dependencies + Dependências do objeto The selected objects have a dependency to unselected objects. Do you want to copy them, too? - The selected objects have a dependency to unselected objects. -Do you want to copy them, too? + Os objetos selecionados dependem de objetos não selecionados. Deseja copiá-los também? @@ -3574,15 +3556,15 @@ Do you want to copy them, too? Please, select at least one point in the left and the right view - Please, select at least one point in the left and the right view + Por favor, selecione pelo menos um ponto nos lados esquerdo e direito Please, select at least %1 points in the left and the right view - Please, select at least %1 points in the left and the right view + Por favor, selecione pelo menos %1 pontos nos lados esquerdo e direito Please pick points in the left and right view - Please pick points in the left and right view + Por favor, selecione pontos dos lados direito e esquerdo The alignment has finished @@ -3594,29 +3576,29 @@ Do you want to copy them, too? Too few points picked in the left view. At least %1 points are needed. - Too few points picked in the left view. At least %1 points are needed. + Poucos pontos selecionados no lado esquerdo. São necessários pelo menos %1 pontos. Too few points picked in the right view. At least %1 points are needed. - Too few points picked in the right view. At least %1 points are needed. + Poucos pontos selecionados no lado direito. São necessários pelo menos %1 pontos. Different number of points picked in left and right view. On the left view %1 points are picked, on the right view %2 points are picked. - Different number of points picked in left and right view. -On the left view %1 points are picked, -on the right view %2 points are picked. + Diferente número de pontos selecionados no lado esquerdo e direito. +No lado esquerdo foram selecionados %1, +no lado direito foram selecionados %2. Try to align group of views - Try to align group of views + Tentar alinhar o grupo de vistas The alignment failed. How do you want to proceed? - The alignment failed. -How do you want to proceed? + O alinhamento falhou. +Como pretende continuar? Retry @@ -3632,19 +3614,19 @@ How do you want to proceed? Different number of points picked in left and right view. On the left view %1 points are picked, on the right view %2 points are picked. - Different number of points picked in left and right view. On the left view %1 points are picked, on the right view %2 points are picked. + Diferente número de pontos selecionados no lado esquerdo e direito. No lado esquerdo foram selecionados %1 pontos e, no lado direito foram selecionados %2 pontos. Point picked at (%1,%2,%3) - Point picked at (%1,%2,%3) + Selecionado o ponto (%1,%2,%3) No point was picked - No point was picked + Nenhum ponto foi escolhido No point was found on model - No point was found on model + Nenhum ponto foi encontrado no modelo @@ -3663,11 +3645,11 @@ How do you want to proceed? Save value - Save value + Salvar o valor Clear list - + Limpar lista @@ -3682,7 +3664,7 @@ How do you want to proceed? Do you really want to abort the operation? - Do you really want to abort the operation? + Quer realmente abortar a operação? @@ -3697,14 +3679,14 @@ How do you want to proceed? Do you really want to abort the operation? - Do you really want to abort the operation? + Quer realmente abortar a operação? Gui::PropertyEditor::LinkLabel Edit... - Edit... + Editar... @@ -3747,15 +3729,15 @@ Deseja sair sem guardar os seus dados? Unhandled PyCXX exception. - Unhandled PyCXX exception. + Exceção PyCXX não tratada. Unhandled FreeCAD exception. - Unhandled FreeCAD exception. + Exceção FreeCAD não resolvida. Unhandled unknown C++ exception. - Unhandled unknown C++ exception. + Exceção de C++ desconhecida não resolvida. &Copy command @@ -3791,7 +3773,7 @@ Deseja sair sem guardar os seus dados? Unhandled std C++ exception. - Unhandled std C++ exception. + Exceção std C++ não resolvida. Word wrap @@ -3822,7 +3804,7 @@ Deseja sair sem guardar os seus dados? Uncomment - Uncomment + Descomentar @@ -3878,35 +3860,33 @@ Deseja sair sem guardar os seus dados? Download online help - Download online help + Transferir a ajuda on-line Download %1's online help - Download %1's online help + transferindo %1 da ajuda on-line Non-existing directory - Non-existing directory + Diretório não-existente The directory '%1' does not exist. Do you want to specify an existing directory? - The directory '%1' does not exist. - -Do you want to specify an existing directory? + O diretório '%1' não existe. +Quer especificar um diretório existente? Missing permission - Missing permission + Falta de permissão You don't have write permission to '%1' Do you want to specify another directory? - You don't have write permission to '%1' - -Do you want to specify another directory? + Você não tem permissão de escrita em '%1' +Quer especificar outro diretório? Stop downloading @@ -3921,11 +3901,11 @@ Do you want to specify another directory? Automatic python modules documentation - Automatic python modules documentation + Documentação de módulos Automatic python Opens a browser to show the Python modules documentation - Opens a browser to show the Python modules documentation + Abre um navegador para visualizar a documentação de módulos Python @@ -3966,7 +3946,7 @@ Do you want to specify another directory? Document window: - Document window: + Janela de documento: @@ -4002,19 +3982,19 @@ Do you want to specify another directory? Gui::TouchpadNavigationStyle Press left mouse button - Press left mouse button + Pressione o botão esquerdo do rato Press SHIFT button - Press SHIFT button + Pressione a tecla SHIFT Press ALT button - Press ALT button + Pressione a tecla ALT Press CTRL and SHIFT buttons - Press CTRL and SHIFT buttons + Pressione as teclas CTRL e SHIFT @@ -4086,18 +4066,18 @@ Do you want to specify another directory? Gui::WorkbenchGroup Select the '%1' workbench - Select the '%1' workbench + Selecione a bancada '%1' NetworkAccessManager <qt>Enter username and password for "%1" at %2</qt> - <qt>Enter username and password for "%1" at %2</qt> + <qt>Insira username e senha para "%1" em %2</qt> <qt>Connect to proxy "%1" using:</qt> - <qt>Connect to proxy "%1" using:</qt> + <qt>ligar-se ao proxy "%1" usando:</qt> @@ -4176,7 +4156,7 @@ Do you want to specify another directory? Grid Snap in - Grid Snap in + Atrair à grelha @@ -4187,7 +4167,7 @@ Do you want to specify another directory? Input in line %1 is not a number - + A entrada na linha %1 não é um número @@ -4241,19 +4221,19 @@ Do you want to specify another directory? Unknown filetype - Unknown filetype + Tipo de ficheiro desconhecido Cannot open unknown filetype: %1 - Cannot open unknown filetype: %1 + Não é possível abrir o tipo de ficheiro desconhecido: %1 Cannot save to unknown filetype: %1 - Cannot save to unknown filetype: %1 + Não é possível salvar um tipo de ficheiro desconhecido: %1 Workbench failure - Workbench failure + Falha da bancada de trabalho %1 @@ -4261,7 +4241,7 @@ Do you want to specify another directory? Unable to launch Qt Assistant (%1) - Unable to launch Qt Assistant (%1) + Não é possível iniciar o assistente de Qt (%1) Exception @@ -4285,23 +4265,23 @@ Do you want to specify another directory? Cannot load workbench - Cannot load workbench + Não é possível carregar a bancada A general error occurred while loading the workbench - A general error occurred while loading the workbench + Ocorreu um erro geral ao carregar a bancada Save views... - Save views... + Salvar vistas... Load views... - Load views... + Carregar vistas... Freeze view - Freeze view + Congelar a vista Clear views @@ -4309,33 +4289,32 @@ Do you want to specify another directory? Restore view &%1 - Restore view &%1 + Restaurar a vista & %1 Save frozen views - Save frozen views + Salvar vistas congeladas Frozen views (*.cam) - Frozen views (*.cam) + Vistas congeladas (*.cam) Restore views - Restore views + Restaurar vistas Importing the restored views would clear the already stored views. Do you want to continue? - Importing the restored views would clear the already stored views. -Do you want to continue? + Importar as vistas restauradas apagará as vistas já armazenadas.Quer continuar? Restore frozen views - Restore frozen views + Restaurar vistas congeladas Cannot open file '%1'. - Cannot open file '%1'. + Não é possível abrir o ficheiro '%1'. Docked @@ -4347,27 +4326,27 @@ Do you want to continue? Fullscreen - Fullscreen + Ecrã inteiro files - files + ficheiros Save picture - Save picture + Salvar imagem New sub-group - New sub-group + Novo subgrupo Enter the name: - Enter the name: + Insira o nome: New text item - New text item + Novo item de texto Enter your text: @@ -4375,7 +4354,7 @@ Do you want to continue? New integer item - New integer item + Novo item inteiro Enter your number: @@ -4383,7 +4362,7 @@ Do you want to continue? New unsigned item - New unsigned item + Novo item não atribuído (unsigned) New float item @@ -4399,7 +4378,7 @@ Do you want to continue? Rename group - Rename group + Renomear Grupo The group '%1' cannot be renamed. @@ -4423,16 +4402,12 @@ Do you want to continue? Saving aborted - Saving aborted + Guardar interrompido Unsaved document Documento não guardado - - Save document before close? - Guardar o documento antes de fechar? - Save Macro Guardar Macro @@ -4451,11 +4426,11 @@ Do you want to continue? Inner - Inner + Interno Outer - Outer + Externo No Browser @@ -4507,15 +4482,15 @@ Por favor, abra um navegador e digite: http://localhost:%1. %1 document (*.FCStd) - %1 document (*.FCStd) + documento %1 (*.FCStd) Document not closable - Document not closable + O documento não pode ser fechado The document is not closable for the moment. - The document is not closable for the moment. + O documento não pode ser fechado neste momento. No OpenGL @@ -4532,8 +4507,7 @@ Por favor, abra um navegador e digite: http://localhost:%1. Unable to load documentation. In order to load it Qt 4.4 or higher is required. - Unable to load documentation. -In order to load it Qt 4.4 or higher is required. + Não é possível carregar a documentação. Para carregá-la Qt 4. 4 ou superior é necessário. %1 Help @@ -4550,14 +4524,12 @@ In order to load it Qt 4.4 or higher is required. Only one object selected. Please select two objects. Be aware the point where you click matters. - Only one object selected. Please select two objects. -Be aware the point where you click matters. + Apenas um objeto selecionado. Por favor selecione dois objetos. Lembre-se que o ponto onde você clicar tem importância. Please select two objects. Be aware the point where you click matters. - Please select two objects. -Be aware the point where you click matters. + Por favor selecione dois objetos. Lembre-se o que ponto onde você clicar tem importância. New boolean item @@ -4591,22 +4563,22 @@ Pode terminar ou cancelar a edição no painel de tarefas. Do you want to save your changes to document '%1' before closing? - + Deseja salvar as alterações no documento '%1' antes de fechar? If you don't save, your changes will be lost. - + Se não salvar, as alterações serão perdidas. StdBoxSelection Standard-View - Standard-View + Vista standard Box selection - Box selection + Caixa de seleção @@ -4681,7 +4653,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. Align the selected objects - Align the selected objects + Alinhar os objetos selecionados @@ -4703,11 +4675,11 @@ Pode terminar ou cancelar a edição no painel de tarefas. StdCmdAxisCross Standard-View - Standard-View + Vista standard Toggle axis cross - Toggle axis cross + Ligar/desligar símbolo de eixos @@ -4722,7 +4694,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. Tile pragmatic - Tile pragmatic + Lado a lado (tile) pragmático @@ -4767,7 +4739,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. Opens the command line in the console - Opens the command line in the console + Abre a linha de comando na consola @@ -4797,7 +4769,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. Cut out - Cut out + Cortar @@ -4812,14 +4784,14 @@ Pode terminar ou cancelar a edição no painel de tarefas. Deletes the selected objects - Deletes the selected objects + Apaga os objetos selecionados StdCmdDemoMode Standard-View - Standard-View + Vista standard View turntable... @@ -4883,7 +4855,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. Opens a dialog to record a macro - Opens a dialog to record a macro + Abre uma caixa de diálogo para gravar uma macro Macro @@ -4898,11 +4870,11 @@ Pode terminar ou cancelar a edição no painel de tarefas. E&dit parameters ... - E&dit parameters ... + &Editar parâmetros... Opens a Dialog to edit the parameters - Opens a Dialog to edit the parameters + Abre uma caixa de diálogo para editar os parâmetros @@ -4913,11 +4885,11 @@ Pode terminar ou cancelar a edição no painel de tarefas. &Preferences ... - &Preferences ... + &Preferências... Opens a Dialog to edit the preferences - Opens a Dialog to edit the preferences + Abre uma caixa de diálogo para editar as preferências @@ -4928,7 +4900,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. Vie&ws - Vie&ws + &Vistas Toggles this window @@ -4939,11 +4911,11 @@ Pode terminar ou cancelar a edição no painel de tarefas. StdCmdDrawStyle Standard-View - Standard-View + Vista standard Draw style - Draw style + Estilo de desenho @@ -5015,7 +4987,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. Show the dependency graph of the objects in the active document - Show the dependency graph of the objects in the active document + Mostra o gráfico de dependência dos objetos do documento ativo @@ -5045,11 +5017,11 @@ Pode terminar ou cancelar a edição no painel de tarefas. Frequently Asked Questions on the FreeCAD website - Frequently Asked Questions on the FreeCAD website + Perguntas frequentes no site do FreeCAD Frequently Asked Questions - Frequently Asked Questions + Perguntas Frequentes @@ -5060,15 +5032,15 @@ Pode terminar ou cancelar a edição no painel de tarefas. FreeCAD Forum - FreeCAD Forum + Fórum do FreeCAD The FreeCAD forum, where you can find help from other users - The FreeCAD forum, where you can find help from other users + O fórum de FreeCAD, onde pode obter ajuda de outros utilizadores The FreeCAD Forum - The FreeCAD Forum + O fórum de FreeCAD @@ -5079,15 +5051,15 @@ Pode terminar ou cancelar a edição no painel de tarefas. Python scripting documentation - Python scripting documentation + Documentação de programação Python Python scripting documentation on the FreeCAD website - Python scripting documentation on the FreeCAD website + Documentação sobre a programação em Python no site do FreeCAD PowerUsers documentation - PowerUsers documentation + Documentação para utilizadores avançados @@ -5098,11 +5070,11 @@ Pode terminar ou cancelar a edição no painel de tarefas. Users documentation - Users documentation + Documentação para utilizadores Documentation for users on the FreeCAD website - Documentation for users on the FreeCAD website + Documentação para utilizadores no site FreeCAD @@ -5124,22 +5096,22 @@ Pode terminar ou cancelar a edição no painel de tarefas. StdCmdFreezeViews Standard-View - Standard-View + Vista standard Freeze display - Freeze display + Congelar a visualização Freezes the current view position - Freezes the current view position + Congela o ponto de vista atual StdCmdHideObjects Standard-View - Standard-View + Vista standard Hide all objects @@ -5154,7 +5126,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. StdCmdHideSelection Standard-View - Standard-View + Vista standard Hide selection @@ -5181,7 +5153,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. Supported formats - Supported formats + Formatos suportados All files (*.*) @@ -5274,7 +5246,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. Measures distance between two selected objects - Measures distance between two selected objects + Medir a distância entre dois objetos selecionados Measure distance @@ -5289,19 +5261,19 @@ Pode terminar ou cancelar a edição no painel de tarefas. Merge project... - Merge project... + Juntar projeto... Merge project - Merge project + Juntar projeto %1 document (*.fcstd) - %1 document (*.fcstd) + documento %1 (*.fcstd) Cannot merge project with itself. - Cannot merge project with itself. + Não é possível juntar projeto a ele próprio. @@ -5320,7 +5292,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. Unnamed - Unnamed + Sem nome @@ -5365,7 +5337,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. Supported formats - Supported formats + Formatos suportados All files (*.*) @@ -5373,11 +5345,11 @@ Pode terminar ou cancelar a edição no painel de tarefas. Cannot open file - + Não é possível abrir o ficheiro. Loading the file %1 is not supported - + Carregar o ficheiro %1 não é suportado @@ -5403,11 +5375,11 @@ Pode terminar ou cancelar a edição no painel de tarefas. Placement... - Placement... + Posição... Place the selected objects - Place the selected objects + Colocar os objetos selecionados @@ -5448,7 +5420,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. &Print preview... - &Print preview... + & Pré-visualizar impressão... Print the document @@ -5456,7 +5428,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. Print preview - Print preview + Pré-Visualizar Impressão @@ -5482,11 +5454,11 @@ Pode terminar ou cancelar a edição no painel de tarefas. Project utility... - Project utility... + Utilitário de projeto... Utility to extract or create project files - Utility to extract or create project files + Utilitário para extrair ou criar ficheiros de projeto @@ -5542,7 +5514,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. Recent file list - Recent file list + Lista de ficheiros recentes @@ -5553,11 +5525,11 @@ Pode terminar ou cancelar a edição no painel de tarefas. &Redo - &Redo + &Refazer Redoes a previously undone action - Redoes a previously undone action + Refaz uma ação desfeita anteriormente @@ -5572,7 +5544,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. Recomputes the current active document - Recomputes the current active document + Recalcula o documento ativo atual @@ -5613,11 +5585,11 @@ Pode terminar ou cancelar a edição no painel de tarefas. Scene inspector... - Scene inspector... + Inspetor de cena... Scene inspector - Scene inspector + Inspetor de cena @@ -5639,7 +5611,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. StdCmdSetAppearance Standard-View - Standard-View + Vista standard Appearance... @@ -5647,14 +5619,14 @@ Pode terminar ou cancelar a edição no painel de tarefas. Sets the display properties of the selected object - Sets the display properties of the selected object + Define as propriedades de exibição do objeto selecionado StdCmdShowObjects Standard-View - Standard-View + Vista standard Show all objects @@ -5669,7 +5641,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. StdCmdShowSelection Standard-View - Standard-View + Vista standard Show selection @@ -5703,7 +5675,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. Texture mapping... - Texture mapping... + Mapeamento de textura... Texture mapping @@ -5740,7 +5712,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. StdCmdToggleClipPlane Standard-View - Standard-View + Vista standard Clipping plane @@ -5755,22 +5727,22 @@ Pode terminar ou cancelar a edição no painel de tarefas. StdCmdToggleNavigation Standard-View - Standard-View + Vista standard Toggle navigation/Edit mode - Toggle navigation/Edit mode + Alternar o modo de navegação/modo de edição Toggle between navigation and edit mode - Toggle between navigation and edit mode + Alternar entre o modo de edição e navegação StdCmdToggleObjects Standard-View - Standard-View + Vista standard Toggle all objects @@ -5785,11 +5757,11 @@ Pode terminar ou cancelar a edição no painel de tarefas. StdCmdToggleSelectability Standard-View - Standard-View + Vista standard Toggle selectability - Toggle selectability + Alternar seletibilidade Toggles the property of the objects to get selected in the 3D-View @@ -5800,7 +5772,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. StdCmdToggleVisibility Standard-View - Standard-View + Vista standard Toggle visibility @@ -5819,7 +5791,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. Tool&bars - Tool&bars + &Barras de ferramentas Toggles this window @@ -5834,11 +5806,11 @@ Pode terminar ou cancelar a edição no painel de tarefas. Transform... - Transform... + Transformar... Transform the geometry of selected objects - Transform the geometry of selected objects + Transformar a geometria dos objetos selecionados @@ -5853,7 +5825,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. Transform the selected object in the 3d view - Transform the selected object in the 3d view + Transformar o objeto selecionado na vista 3D @@ -5864,11 +5836,11 @@ Pode terminar ou cancelar a edição no painel de tarefas. Go to selection - Go to selection + Ir para seleção Scroll to first selected item - Scroll to first selected item + Ir para o primeiro item selecionado @@ -5883,7 +5855,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. Undo exactly one action - Undo exactly one action + Desfazer só uma ação @@ -5894,11 +5866,11 @@ Pode terminar ou cancelar a edição no painel de tarefas. &Units calculator... - &Units calculator... + & Calculadora unidades... Start the units calculator - Start the units calculator + Iniciar o calculador de unidades @@ -5909,7 +5881,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. Dock views - Dock views + Ancorar vistas Dock all top-level views @@ -5920,71 +5892,71 @@ Pode terminar ou cancelar a edição no painel de tarefas. StdCmdViewAxo Standard-View - Standard-View + Vista standard Axometric - Axometric + Axonometria Set to axometric view - Set to axometric view + Definir vista axonométrica StdCmdViewBottom Standard-View - Standard-View + Vista standard Bottom - Bottom + De baixo Set to bottom view - Set to bottom view + Vista de baixo StdCmdViewCreate Standard-View - Standard-View + Vista standard Create new view - Create new view + Criar nova vista Creates a new view window for the active document - Creates a new view window for the active document + Cria uma nova janela de exibição para o documento ativo StdCmdViewExample1 Standard-View - Standard-View + Vista standard Inventor example #1 - Inventor example #1 + Exemplo Inventor #1 Shows a 3D texture with manipulator - Shows a 3D texture with manipulator + Mostra uma textura 3D com manipulador StdCmdViewExample2 Standard-View - Standard-View + Vista standard Inventor example #2 - Inventor example #2 + Exemplo Inventor #2 Shows spheres and drag-lights @@ -5995,71 +5967,71 @@ Pode terminar ou cancelar a edição no painel de tarefas. StdCmdViewExample3 Standard-View - Standard-View + Vista standard Inventor example #3 - Inventor example #3 + Exemplo Inventor #3 Shows a animated texture - Shows a animated texture + Mostra uma textura animada StdCmdViewFitAll Standard-View - Standard-View + Vista standard Fit all - Fit all + Visualizar tudo Fits the whole content on the screen - Fits the whole content on the screen + Ajustar todo o conteúdo à tela StdCmdViewFitSelection Standard-View - Standard-View + Vista standard Fit selection - Fit selection + Enquadrar seleção Fits the selected content on the screen - Fits the selected content on the screen + Enquadra o conteúdo selecionado no monitor StdCmdViewFront Standard-View - Standard-View + Vista standard Front - Front + Frente Set to front view - Set to front view + Ajusta para a vista frontal StdCmdViewIvIssueCamPos Standard-View - Standard-View + Vista standard Issue camera position - Issue camera position + Mostrar a posição da câmera Issue the camera position to the console and to a macro, to easily recall this position @@ -6070,7 +6042,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. StdCmdViewIvStereoInterleavedColumns Standard-View - Standard-View + Vista standard Stereo Interleaved Columns @@ -6085,7 +6057,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. StdCmdViewIvStereoInterleavedRows Standard-View - Standard-View + Vista standard Stereo Interleaved Rows @@ -6100,7 +6072,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. StdCmdViewIvStereoOff Standard-View - Standard-View + Vista standard Stereo Off @@ -6115,7 +6087,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. StdCmdViewIvStereoQuadBuff Standard-View - Standard-View + Vista standard Stereo quad buffer @@ -6130,60 +6102,52 @@ Pode terminar ou cancelar a edição no painel de tarefas. StdCmdViewIvStereoRedGreen Standard-View - Standard-View - - - Stereo red/green - Stereo red/green - - - Switch stereo viewing to red/green - Switch stereo viewing to red/green + Vista standard Stereo red/cyan - + Stereo red/cyan Switch stereo viewing to red/cyan - + Switch stereo viewing to red/cyan StdCmdViewLeft Standard-View - Standard-View + Vista standard Left - Left + Esquerda Set to left view - Set to left view + Ajusta para a vista esquerda StdCmdViewRear Standard-View - Standard-View + Vista standard Rear - Rear + Traseira Set to rear view - Set to rear view + Ajusta para a vista de trás StdCmdViewRight Standard-View - Standard-View + Vista standard Right @@ -6191,44 +6155,44 @@ Pode terminar ou cancelar a edição no painel de tarefas. Set to right view - Set to right view + Ajusta para a vista direita StdCmdViewRotateLeft Standard-View - Standard-View + Vista standard Rotate Left - Rotate Left + Rodar para a Esquerda Rotate the view by 90° counter-clockwise - Rotate the view by 90° counter-clockwise + Rodar a vista 90º no sentido anti-horário StdCmdViewRotateRight Standard-View - Standard-View + Vista standard Rotate Right - Rotate Right + Rodar para a Direita Rotate the view by 90° clockwise - Rotate the view by 90° clockwise + Rodar a vista 90º no sentido horário StdCmdViewTop Standard-View - Standard-View + Vista standard Top @@ -6236,22 +6200,22 @@ Pode terminar ou cancelar a edição no painel de tarefas. Set to top view - Set to top view + Vista de topo StdCmdViewVR Standard-View - Standard-View + Vista standard FreeCAD-VR - + FreeCAD-VR Extend the FreeCAD 3D Window to a Oculus Rift - + Estender a janela 3D FreeCAD para Oculus Rift @@ -6303,74 +6267,74 @@ Pode terminar ou cancelar a edição no painel de tarefas. Workbench - Workbench + Bancada de trabalho Switch between workbenches - Switch between workbenches + Alternar entre bancadas de trabalho StdOrthographicCamera Standard-View - Standard-View + Vista standard Orthographic view - Orthographic view + Vista ortogonal Switches to orthographic view mode - Switches to orthographic view mode + Alterna para o modo de vista ortogonal StdPerspectiveCamera Standard-View - Standard-View + Vista standard Perspective view - Perspective view + Vista em perspectiva Switches to perspective view mode - Switches to perspective view mode + Alterna para o modo de vista em perspetiva StdViewBoxZoom Standard-View - Standard-View + Vista standard Box zoom - Box zoom + Zoom por caixa StdViewDockUndockFullscreen Standard-View - Standard-View + Vista standard Document window - Document window + Janela do documento Display the active view either in fullscreen, in undocked or docked mode - Display the active view either in fullscreen, in undocked or docked mode + Mostrar a vista activa em tela cheia, em modo desencaixado ou encaixado StdViewScreenShot Standard-View - Standard-View + Vista standard Save picture... @@ -6385,7 +6349,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. StdViewZoomIn Standard-View - Standard-View + Vista standard Zoom In @@ -6396,7 +6360,7 @@ Pode terminar ou cancelar a edição no painel de tarefas. StdViewZoomOut Standard-View - Standard-View + Vista standard Zoom Out @@ -6407,24 +6371,23 @@ Pode terminar ou cancelar a edição no painel de tarefas. Std_Delete Object dependencies - Object dependencies + Dependências do objeto This object is referenced by other objects and thus these objects might get broken. Are you sure to continue? - This object is referenced by other objects and thus these objects might get broken. -Are you sure to continue? + Este objeto é referenciado por outros objetos, e assim, esses objetos podem ficar quebrados. Deseja continuar? Std_DrawStyle As is - As is + Como é Normal mode - Normal mode + Modo normal Wireframe @@ -6444,11 +6407,11 @@ Are you sure to continue? Shaded - Shaded + Sombreado Shaded mode - Shaded mode + Modo sombreado Points @@ -6456,49 +6419,47 @@ Are you sure to continue? Points mode - Points mode + Modo de pontos Std_DuplicateSelection Object dependencies - Object dependencies + Dependências do objeto The selected objects have a dependency to unselected objects. Do you want to duplicate them, too? - The selected objects have a dependency to unselected objects. -Do you want to duplicate them, too? + Os objetos selecionados dependem de objetos não selecionados. Deseja duplica-los também? Std_ExportGraphviz Graphviz not found - Graphviz not found + Graphviz não encontrado Graphviz couldn't be found on your system. Do you want to specify its installation path if it's already installed? - Graphviz couldn't be found on your system. -Do you want to specify its installation path if it's already installed? + Graphviz não pôde ser encontrado no seu sistema. Quer especificar seu caminho de instalação se já estiver instalado? Graphviz installation path - Graphviz installation path + Caminho de instalação do Graphviz Dependency graph - Dependency graph + Gráfico de dependência Graphviz failed - Graphviz failed + Graphviz falhou Graphviz failed to create an image file - Graphviz failed to create an image file + O Graphviz falhou ao criar um ficheiro de imagem @@ -6525,7 +6486,7 @@ Do you want to specify its installation path if it's already installed? Visibility - Visibility + Visibilidade &View diff --git a/src/Gui/Language/FreeCAD_ro.qm b/src/Gui/Language/FreeCAD_ro.qm index 5d4295f40b..c6490c0b02 100644 Binary files a/src/Gui/Language/FreeCAD_ro.qm and b/src/Gui/Language/FreeCAD_ro.qm differ diff --git a/src/Gui/Language/FreeCAD_ro.ts b/src/Gui/Language/FreeCAD_ro.ts index 4fa409b11d..e08569caa5 100644 --- a/src/Gui/Language/FreeCAD_ro.ts +++ b/src/Gui/Language/FreeCAD_ro.ts @@ -21,7 +21,7 @@ Angle Snap - Ancora la unghi + Ancoră la unghi 1 ° @@ -60,22 +60,22 @@ CmdViewMeasureClearAll Measure - Measure + Măsură Clear measurement - Clear measurement + Curăță măsurătoarea CmdViewMeasureToggleAll Measure - Measure + Măsură Toggle measurement - Toggle measurement + Comută măsurătoarea @@ -86,7 +86,7 @@ Global Sensitivity: - Sensibilitate globala: + Sensibilitate globală: Dominant Mode @@ -94,19 +94,19 @@ Flip Y/Z - Schimba Y/Z + Schimbă Y/Z Enable Translations - Activeaza traducerile + Activează traducerile Enable Rotations - Activeaza rotatiile + Activează rotaţiile Calibrate - Calibreaza + Calibrează Default @@ -125,11 +125,11 @@ DlgUnitCalculator Units calculator - Units calculator + Calculator unități as: - as: + ca: => @@ -160,7 +160,7 @@ Filename - Filename + Nume fișier @@ -216,7 +216,7 @@ Press SHIFT and middle mouse button - Apasa SHIFT si butonul din mijloc al mouse-ului + Apasă SHIFT şi butonul din mijloc al mouse-ului Press middle mouse button @@ -239,7 +239,7 @@ Press middle and left or right mouse button - Press middle and left or right mouse button + Apăsați butoanele stâng și mijloc sau drept al mausului Scroll middle mouse button or keep middle button pressed @@ -313,7 +313,7 @@ while doing a left or right click and move the mouse up or down Word size - Word size + Dimensiune cuvânt @@ -331,15 +331,15 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::Clipping Clipping - Clipping + Clipire Clipping X - Clipping X + Clipire X Flip - Flip + Întoarce Offset @@ -347,15 +347,15 @@ while doing a left or right click and move the mouse up or down Clipping Y - Clipping Y + Clipire Y Clipping Z - Clipping Z + Clipire Z Clipping custom direction - Clipping custom direction + Clipire direcție personalizată View @@ -363,7 +363,7 @@ while doing a left or right click and move the mouse up or down Adjust to view direction - Adjust to view direction + Ajustează pentru a vizualiza direcția Direction @@ -385,7 +385,7 @@ while doing a left or right click and move the mouse up or down Speed - Viteza + Viteză Maximum @@ -401,7 +401,7 @@ while doing a left or right click and move the mouse up or down Enable timer - Activeaza cronometru + Activează cronometru s @@ -470,7 +470,7 @@ while doing a left or right click and move the mouse up or down Username: - Username: + Nume utilizator: Site: @@ -478,7 +478,7 @@ while doing a left or right click and move the mouse up or down %1 at %2 - %1 at %2 + %1 la %2 @@ -487,13 +487,9 @@ while doing a left or right click and move the mouse up or down Choose Icon Alege iconiţa - - Add icons... - Adauga icon-uri... - Icon folders... - + Icon folders... @@ -944,87 +940,87 @@ Vă rugăm definiți o altă comandă rapidă. Aluminium - + Aluminium Brass - + Brass Bronze - + Bronze Copper - + Copper Chrome - + Chrome Emerald - + Emerald Gold - + Gold Jade - + Jade Metalized - + Metalized Neon GNC - + Neon GNC Neon PHC - + Neon PHC Obsidian - + Obsidian Pewter - + Pewter Plaster - + Plaster Plastic - + Plastic Ruby - + Ruby Satin - + Satin Shiny plastic - + Shiny plastic Silver - + Silver Steel - + Oţel Stone - + Stone @@ -1134,11 +1130,11 @@ Vă rugăm definiți o altă comandă rapidă. Enable tiled background - Enable tiled background + Activează fundalul placat Style sheet: - Style sheet: + Stil foaie: @@ -1161,7 +1157,7 @@ Vă rugăm definiți o altă comandă rapidă. No style sheet - No style sheet + Fără stil foaie @@ -1317,7 +1313,7 @@ Acest fişier există deja. You have no write permission for the directory. Please, choose another one. - You have no write permission for the directory. Please, choose another one. + Nu aveți permisiune de scriere pentru director. Alegeți altul. @@ -1515,15 +1511,15 @@ Specify another directory, please. License information: - License information: + Informație licență: License URL - License URL + URL licență Open in browser - Open in browser + Deschide în navigator @@ -1593,19 +1589,15 @@ Specify another directory, please. Show all object types - Show all object types + Arată toate tipurile de obiecte No selection Nici o selecţie - - Please select an object of the list - Please select an object of the list - Please select an object from the list - + Please select an object from the list @@ -1786,7 +1778,7 @@ Specify another directory, please. Anti-Aliasing - Anti-Aliasing + Anti-aliere None @@ -1794,7 +1786,7 @@ Specify another directory, please. Line Smoothing - Line Smoothing + Netezire linie MSAA 2x @@ -1980,91 +1972,91 @@ Specify another directory, please. Authoring and License - + Authoring and License Author name - + Author name <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> - + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> If this is checked, the "Last modified by" field will be set when saving the file - + If this is checked, the "Last modified by" field will be set when saving the file Set on save - + Set on save Company - + Company Default license - + Default license The default license for new documents - + The default license for new documents All rights reserved - + All rights reserved CreativeCommons Attribution - + CreativeCommons Attribution CreativeCommons Attribution-ShareAlike - + CreativeCommons Attribution-ShareAlike CreativeCommons Attribution-NoDerivatives - + CreativeCommons Attribution-NoDerivatives CreativeCommons Attribution-NonCommercial - + CreativeCommons Attribution-NonCommercial CreativeCommons Attribution-NonCommercial-ShareAlike - + CreativeCommons Attribution-NonCommercial-ShareAlike CreativeCommons Attribution-NonCommercial-NoDerivatives - + CreativeCommons Attribution-NonCommercial-NoDerivatives Public Domain - + Public Domain FreeArt - + FreeArt Other - + Altceva License URL - License URL + URL licență An URL where the user can find more details about the license - + An URL where the user can find more details about the license http://en.wikipedia.org/wiki/All_rights_reserved - + http://en.wikipedia.org/wiki/All_rights_reserved The default company to use for new files - + The default company to use for new files @@ -2160,10 +2152,6 @@ Specify another directory, please. Black Negru - - Transparent - Transparent - Image dimensions Dimensiunile imaginii @@ -2408,15 +2396,15 @@ Specify another directory, please. US customary (in/lb) - US customary (in/lb) + US obișnuit (in/lb) Number of decimals: - Number of decimals: + Număr de zecimale: Imperial decimal (in/lb) - Imperial decimal (in/lb) + Zecimale imperiale (in/lb) @@ -2509,7 +2497,7 @@ Specify another directory, please. Gui::Dialog::DlgUnitsCalculator Unit mismatch - Unit mismatch + Unitatea nu se potrivește @@ -2559,50 +2547,50 @@ Specify another directory, please. %1 at %2 - %1 at %2 + %1 la %2 Gui::Dialog::DownloadItem Save File - Save File + Salvează fișierul Download canceled: %1 - Download canceled: %1 + Descărcare anulată: %1 Open containing folder - Open containing folder + Deschidere dosarul care conţine Error opening save file: %1 - Error opening save file: %1 + Eroare la deschiderea fișierului salvat: %1 Error saving: %1 - Error saving: %1 + Eroare la salvare: %1 Network Error: %1 - Network Error: %1 + Eroare rețea: %1 seconds - seconds + secunde minutes - minutes + minute - %4 %5 remaining - - %4 %5 remaining + - %4 %5 rămase %1 of %2 (%3/sec) %4 - %1 of %2 (%3/sec) %4 + %1 din %2 (%3/sec) %4 ? @@ -2610,76 +2598,72 @@ Specify another directory, please. %1 of %2 - Stopped - %1 of %2 - Stopped + %1 din %2 - Oprit bytes - bytes + octeți kB - kB + kO MB - MB + MO Gui::Dialog::DownloadManager Downloads - Downloads + Descărcări Clean up - Clean up + Curăță 0 Items - 0 Items + 0 elemente Download Manager - Download Manager + Administrator descărcări 1 Download - 1 Download + 1 descărcare %1 Downloads - %1 Downloads + %1 descărcări Gui::Dialog::IconDialog - - Add icon - Adauga pictograma - Icon folders - + Icon folders Add icon folder - + Add icon folder Gui::Dialog::IconFolders Add or remove custom icon folders - + Add or remove custom icon folders Remove folder - + Remove folder Removing a folder only takes effect after an application restart. - + Removing a folder only takes effect after an application restart. @@ -2933,11 +2917,11 @@ Specify another directory, please. Incorrect quantity - + Incorrect quantity There are input fields with incorrect input, please ensure valid placement values! - + There are input fields with incorrect input, please ensure valid placement values! @@ -3177,39 +3161,39 @@ Specify another directory, please. Search - + Search Searches object labels - + Searches object labels Clears the search field - + Clears the search field Select only - + Select only Selects only this object - + Selects only this object Deselect - + Deselectati Deselects this object - + Deselects this object Zoom fit - + Zoom fit Selects and fits this object in the 3D window - + Selects and fits this object in the 3D window Go to selection @@ -3217,7 +3201,7 @@ Specify another directory, please. Selects and locates this object in the tree view - + Selects and locates this object in the tree view @@ -3409,31 +3393,31 @@ Doriți să salvați modificările? Gui::GraphvizView PNG format (*.png) - PNG format (*.png) + Format PNG (*.png) Bitmap format (*.bmp) - Bitmap format (*.bmp) + Format bitmap (*.bmp) GIF format (*.gif) - GIF format (*.gif) + Format GIF (*.gif) JPG format (*.jpg) - JPG format (*.jpg) + Format JPG (*.jpg) SVG format (*.svg) - SVG format (*.svg) + Format SVG (*.svg) PDF format (*.pdf) - PDF format (*.pdf) + Format PDF (*.pdf) Export graph - Export graph + Exportă graficul @@ -3444,7 +3428,7 @@ Doriți să salvați modificările? Save value - Save value + Salvează valoarea @@ -3470,7 +3454,7 @@ Doriți să salvați modificările? Gui::LabelEditor List - + List @@ -3550,13 +3534,13 @@ Doriți să salvați modificările? Object dependencies - Object dependencies + Dependențe obiect The selected objects have a dependency to unselected objects. Do you want to copy them, too? - The selected objects have a dependency to unselected objects. -Do you want to copy them, too? + Obiectele selectate au o dependență la un obiect neselectat. +Doriți să fie copiat și acesta? @@ -3645,7 +3629,7 @@ Cum doresti sa continuam? No point was found on model - No point was found on model + Pe model nu a fost găsit nici un punct @@ -3664,11 +3648,11 @@ Cum doresti sa continuam? Save value - Save value + Salvează valoarea Clear list - + Clear list @@ -3705,7 +3689,7 @@ Cum doresti sa continuam? Gui::PropertyEditor::LinkLabel Edit... - Edit... + Editare... @@ -3920,11 +3904,11 @@ Doriţi să specificaţi un alt director? Automatic python modules documentation - Automatic python modules documentation + Documentație automată module python Opens a browser to show the Python modules documentation - Opens a browser to show the Python modules documentation + Deschide un navigator pentru a arăta documentația modulelor Python @@ -3972,7 +3956,7 @@ Doriţi să specificaţi un alt director? Gui::TaskView::TaskDialog A dialog is already open in the task panel - O fereastra de dialog este deja deschisa in fereastra de sarcini + O fereastră de dialog este deja deschisă în fereastra de sarcini @@ -4013,7 +3997,7 @@ Doriţi să specificaţi un alt director? Press CTRL and SHIFT buttons - Press CTRL and SHIFT buttons + Apăsați tastele CTRL și SHIFT @@ -4092,11 +4076,11 @@ Doriţi să specificaţi un alt director? NetworkAccessManager <qt>Enter username and password for "%1" at %2</qt> - <qt>Enter username and password for "%1" at %2</qt> + <qt>Introduceți numele de utilizator și parola pentru "%1" la %2</qt> <qt>Connect to proxy "%1" using:</qt> - <qt>Connect to proxy "%1" using:</qt> + <qt>Conectare la proxy "%1" utilizând:</qt> @@ -4186,7 +4170,7 @@ Doriţi să specificaţi un alt director? Input in line %1 is not a number - + Input in line %1 is not a number @@ -4428,10 +4412,6 @@ Doriţi să continuaţi? Unsaved document Document nesalvat - - Save document before close? - Salvați documentul înainte de a închide? - Save Macro Salvaţi macrocomanda @@ -4583,15 +4563,15 @@ Trebuie fie să terminaţi sau să anulaţi editarea în panoul de activitate. Do you want to close this dialog? - Doriti sa inchideti aceasta fereastra de dialog? + Doriţi să închideţi această fereastră de dialog? Do you want to save your changes to document '%1' before closing? - + Do you want to save your changes to document '%1' before closing? If you don't save, your changes will be lost. - + If you don't save, your changes will be lost. @@ -5041,11 +5021,11 @@ Trebuie fie să terminaţi sau să anulaţi editarea în panoul de activitate. Frequently Asked Questions on the FreeCAD website - Frequently Asked Questions on the FreeCAD website + Întrebări puse frecvent pe pagina web a FreeCAD Frequently Asked Questions - Frequently Asked Questions + Întrebări puse frecvent @@ -5056,15 +5036,15 @@ Trebuie fie să terminaţi sau să anulaţi editarea în panoul de activitate. FreeCAD Forum - FreeCAD Forum + Forum FreeCAD The FreeCAD forum, where you can find help from other users - The FreeCAD forum, where you can find help from other users + Forumul FreeCAD, unde puteți găsi ajutor de la alți utilizatori The FreeCAD Forum - The FreeCAD Forum + Forumul FreeCAD @@ -5075,15 +5055,15 @@ Trebuie fie să terminaţi sau să anulaţi editarea în panoul de activitate. Python scripting documentation - Python scripting documentation + Documente despre codarea în limbajul python Python scripting documentation on the FreeCAD website - Python scripting documentation on the FreeCAD website + Documente despre codarea în limbajul python pe pagina web FreeCAD PowerUsers documentation - PowerUsers documentation + Documentație utilizatori avansați @@ -5094,11 +5074,11 @@ Trebuie fie să terminaţi sau să anulaţi editarea în panoul de activitate. Users documentation - Users documentation + Documentație utilizatori Documentation for users on the FreeCAD website - Documentation for users on the FreeCAD website + Documentația pentru utilizatori pe pagina web a FreeCAD @@ -5207,7 +5187,7 @@ Trebuie fie să terminaţi sau să anulaţi editarea în panoul de activitate. Step into - Step into + Pas în @@ -5316,7 +5296,7 @@ Trebuie fie să terminaţi sau să anulaţi editarea în panoul de activitate. Unnamed - Unnamed + Nedenumit @@ -5369,11 +5349,11 @@ Trebuie fie să terminaţi sau să anulaţi editarea în panoul de activitate. Cannot open file - + Cannot open file Loading the file %1 is not supported - + Loading the file %1 is not supported @@ -5890,11 +5870,11 @@ Trebuie fie să terminaţi sau să anulaţi editarea în panoul de activitate. &Units calculator... - &Units calculator... + &calculator unități... Start the units calculator - Start the units calculator + Pornește calculatorul de unități @@ -6128,21 +6108,13 @@ Trebuie fie să terminaţi sau să anulaţi editarea în panoul de activitate.Standard-View Vedere standard - - Stereo red/green - Stereo rosu/verde - - - Switch stereo viewing to red/green - Schimba vizualizarea stereo in rosu/verde - Stereo red/cyan - + Stereo red/cyan Switch stereo viewing to red/cyan - + Switch stereo viewing to red/cyan @@ -6243,11 +6215,11 @@ Trebuie fie să terminaţi sau să anulaţi editarea în panoul de activitate. FreeCAD-VR - + FreeCAD-VR Extend the FreeCAD 3D Window to a Oculus Rift - + Extend the FreeCAD 3D Window to a Oculus Rift @@ -6403,13 +6375,13 @@ Trebuie fie să terminaţi sau să anulaţi editarea în panoul de activitate.Std_Delete Object dependencies - Object dependencies + Dependențe obiect This object is referenced by other objects and thus these objects might get broken. Are you sure to continue? - This object is referenced by other objects and thus these objects might get broken. -Are you sure to continue? + La acest obiect face referire alte obiecte și prin urmare aceste obiecte ar putea fi defalcate. +Sigur continuați? @@ -6432,19 +6404,19 @@ Are you sure to continue? Flat lines - Flat lines + Linii plane Flat lines mode - Flat lines mode + Mod linii plane Shaded - Shaded + Umbrit Shaded mode - Shaded mode + Mod umbrit Points @@ -6452,20 +6424,20 @@ Are you sure to continue? Points mode - Points mode + Mod puncte Std_DuplicateSelection Object dependencies - Object dependencies + Dependențe obiect The selected objects have a dependency to unselected objects. Do you want to duplicate them, too? - The selected objects have a dependency to unselected objects. -Do you want to duplicate them, too? + Obiectele selectate au o dependență la un obiect neselectat. +Doriți să fie duplicat și acesta? diff --git a/src/Gui/Language/FreeCAD_ru.qm b/src/Gui/Language/FreeCAD_ru.qm index fb0f8fecf0..116ca8870e 100644 Binary files a/src/Gui/Language/FreeCAD_ru.qm and b/src/Gui/Language/FreeCAD_ru.qm differ diff --git a/src/Gui/Language/FreeCAD_ru.ts b/src/Gui/Language/FreeCAD_ru.ts index e795e50ebe..8d35301627 100644 --- a/src/Gui/Language/FreeCAD_ru.ts +++ b/src/Gui/Language/FreeCAD_ru.ts @@ -60,22 +60,22 @@ CmdViewMeasureClearAll Measure - Measure + Мера Clear measurement - Clear measurement + Стереть измерение CmdViewMeasureToggleAll Measure - Measure + Мера Toggle measurement - Toggle measurement + Переключатель измерения @@ -156,7 +156,7 @@ Ico - Ico + ICO Filename @@ -312,7 +312,7 @@ while doing a left or right click and move the mouse up or down Word size - Word size + Размер слова @@ -330,11 +330,11 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::Clipping Clipping - Clipping + Отсечения Clipping X - Clipping X + Отсечения X Flip @@ -346,15 +346,15 @@ while doing a left or right click and move the mouse up or down Clipping Y - Clipping Y + Отсечения Y Clipping Z - Clipping Z + Отсечения Y Clipping custom direction - Clipping custom direction + Отсечение пользовательских направление View @@ -362,7 +362,7 @@ while doing a left or right click and move the mouse up or down Adjust to view direction - Adjust to view direction + Настройки для просмотра направление Direction @@ -486,13 +486,9 @@ while doing a left or right click and move the mouse up or down Choose Icon Выберите иконку - - Add icons... - Добавить иконки... - Icon folders... - + Icon folders... @@ -942,87 +938,87 @@ Please define another shortcut. Aluminium - + Алюминий Brass - + Латунь Bronze - + Бронза Copper - + Медь Chrome - + Хром Emerald - + Изумруд Gold - + Золото Jade - + Нефрит Metalized - + Металлик Neon GNC - + Неон GNC Neon PHC - + Неон PHC Obsidian - + Обсидиан Pewter - + Пьютер Plaster - + Гипс Plastic - + Пластик Ruby - + Рубин Satin - + Атлас Shiny plastic - + Бликующий пластик Silver - + Серебро Steel - + Сталь Stone - + Камень @@ -1275,7 +1271,7 @@ This file already exists. Macro path: - Путь к Макросу: + Куда записывать макросы: ... @@ -1597,13 +1593,9 @@ Specify another directory, please. No selection Нет выбора - - Please select an object of the list - Please select an object of the list - Please select an object from the list - + Выберите объект из списка @@ -1978,75 +1970,75 @@ Specify another directory, please. Authoring and License - + Авторство и лицензия Author name - + Имя автора <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> - + <html><head/><body><p>Какое имя использовать при создании документов.</p><p>Не заполняйте поле, чтобы сохранить анонимность.</p><p>Также можно написать что-то вроде этого:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> If this is checked, the "Last modified by" field will be set when saving the file - + Если включено, при сохранении файла будет заполняться поле «Автор последних изменений» Set on save - + Устанавливать при сохранении Company - + Компания Default license - + Лицензия по умолчанию The default license for new documents - + Используемая по умолчанию лицензия для новых документов All rights reserved - + Все права защищены CreativeCommons Attribution - + Creative Commons Attribution CreativeCommons Attribution-ShareAlike - + Creative Commons Attribution-ShareAlike CreativeCommons Attribution-NoDerivatives - + Creative Commons Attribution-NoDerivatives CreativeCommons Attribution-NonCommercial - + Creative Commons Attribution-NonCommercial CreativeCommons Attribution-NonCommercial-ShareAlike - + Creative Commons Attribution-NonCommercial-ShareAlike CreativeCommons Attribution-NonCommercial-NoDerivatives - + Creative Commons Attribution-NonCommercial-NoDerivatives Public Domain - + Общественное достояние FreeArt - + FreeArt Other - + Нечто License URL @@ -2054,15 +2046,15 @@ Specify another directory, please. An URL where the user can find more details about the license - + Адрес, по которому можно получить подробную информацию об условиях лицензирования http://en.wikipedia.org/wiki/All_rights_reserved - + https://ru.wikipedia.org/wiki/All_rights_reserved The default company to use for new files - + Какую компанию указывать во всех новых файлах @@ -2158,10 +2150,6 @@ Specify another directory, please. Black Чёрный - - Transparent - Прозрачный - Image dimensions Размеры изображения @@ -2351,7 +2339,7 @@ Specify another directory, please. Gui commands - Gui команды + Команды в графическом интерфейсе Recording GUI commands @@ -2363,7 +2351,7 @@ Specify another directory, please. Macro path - Путь к Макросу + Куда записывать макросы General macro settings @@ -2652,32 +2640,28 @@ Specify another directory, please. Gui::Dialog::IconDialog - - Add icon - Добавить иконку - Icon folders - + Icon folders Add icon folder - + Add icon folder Gui::Dialog::IconFolders Add or remove custom icon folders - + Add or remove custom icon folders Remove folder - + Удалить папку Removing a folder only takes effect after an application restart. - + Removing a folder only takes effect after an application restart. @@ -2931,11 +2915,11 @@ Specify another directory, please. Incorrect quantity - + Неправильное количество There are input fields with incorrect input, please ensure valid placement values! - + There are input fields with incorrect input, please ensure valid placement values! @@ -3060,7 +3044,7 @@ Specify another directory, please. Model - Model + Модель @@ -3175,39 +3159,39 @@ Specify another directory, please. Search - + Search Searches object labels - + Searches object labels Clears the search field - + Clears the search field Select only - + Select only Selects only this object - + Selects only this object Deselect - + Снять выделение Deselects this object - + Снять выделение с этого объекта Zoom fit - + Zoom fit Selects and fits this object in the 3D window - + Selects and fits this object in the 3D window Go to selection @@ -3215,7 +3199,7 @@ Specify another directory, please. Selects and locates this object in the tree view - + Selects and locates this object in the tree view @@ -3407,27 +3391,27 @@ Do you want to save your changes? Gui::GraphvizView PNG format (*.png) - PNG format (*.png) + Формат PNG (*.png) Bitmap format (*.bmp) - Bitmap format (*.bmp) + Формат Bitmap (*.bmp) GIF format (*.gif) - GIF format (*.gif) + Формат GIF (*.gif) JPG format (*.jpg) - JPG format (*.jpg) + Формат JPG (*.jpg) SVG format (*.svg) - SVG format (*.svg) + Формат SVG (*.svg) PDF format (*.pdf) - PDF format (*.pdf) + Формат PDF (*.pdf) Export graph @@ -3442,7 +3426,7 @@ Do you want to save your changes? Save value - Save value + Сохранить значение @@ -3468,7 +3452,7 @@ Do you want to save your changes? Gui::LabelEditor List - + List @@ -3548,7 +3532,7 @@ Do you want to save your changes? Object dependencies - Object dependencies + Зависимости объектов The selected objects have a dependency to unselected objects. @@ -3660,11 +3644,11 @@ How do you want to proceed? Save value - Save value + Сохранить значение Clear list - + Clear list @@ -3701,7 +3685,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel Edit... - Edit... + Изменить... @@ -4007,7 +3991,7 @@ Do you want to specify another directory? Press CTRL and SHIFT buttons - Press CTRL and SHIFT buttons + Нажмите клавиши Ctrl и Shift @@ -4180,7 +4164,7 @@ Do you want to specify another directory? Input in line %1 is not a number - + Input in line %1 is not a number @@ -4422,10 +4406,6 @@ Do you want to continue? Unsaved document Документ несохранен - - Save document before close? - Сохранить документ перед закрытием? - Save Macro Сохранить Макрос @@ -4578,11 +4558,11 @@ You either have to finish or cancel the editing in the task panel. Do you want to save your changes to document '%1' before closing? - + Сохранить изменения перед закрытием документа '%1'? If you don't save, your changes will be lost. - + If you don't save, your changes will be lost. @@ -5032,11 +5012,11 @@ You either have to finish or cancel the editing in the task panel. Frequently Asked Questions on the FreeCAD website - Frequently Asked Questions on the FreeCAD website + Ответы на часто задаваемые вопросы на сайте FreeCAD Frequently Asked Questions - Frequently Asked Questions + Часто задаваемые вопросы @@ -5047,15 +5027,15 @@ You either have to finish or cancel the editing in the task panel. FreeCAD Forum - FreeCAD Forum + Форум FreeCAD The FreeCAD forum, where you can find help from other users - The FreeCAD forum, where you can find help from other users + Форум FreeCAD, на котором можно получить помощь от других пользователей The FreeCAD Forum - The FreeCAD Forum + Форум FreeCAD @@ -5066,15 +5046,15 @@ You either have to finish or cancel the editing in the task panel. Python scripting documentation - Python scripting documentation + Документация по созданию скриптов на Python Python scripting documentation on the FreeCAD website - Python scripting documentation on the FreeCAD website + Документация по созданию скриптов на Python на сайте FreeCAD PowerUsers documentation - PowerUsers documentation + Документация для опытных пользователей @@ -5085,11 +5065,11 @@ You either have to finish or cancel the editing in the task panel. Users documentation - Users documentation + Пользовательская документация Documentation for users on the FreeCAD website - Documentation for users on the FreeCAD website + Документация для пользователей на сайте FreeCAD @@ -5360,11 +5340,11 @@ You either have to finish or cancel the editing in the task panel. Cannot open file - + Невозможно открыть файл Loading the file %1 is not supported - + Загрузка файла %1 не поддерживается @@ -5881,11 +5861,11 @@ You either have to finish or cancel the editing in the task panel. &Units calculator... - &Units calculator... + &Калькулятор единиц... Start the units calculator - Start the units calculator + Открыть калькулятор единиц измерения @@ -6005,7 +5985,7 @@ You either have to finish or cancel the editing in the task panel. Fits the whole content on the screen - Устанавливается все содержимое на экране + Уместить всё содержимое на экране @@ -6020,7 +6000,7 @@ You either have to finish or cancel the editing in the task panel. Fits the selected content on the screen - Устанавливается выбранное содержимое на экране + Уместить выбранные объекты на экране @@ -6119,21 +6099,13 @@ You either have to finish or cancel the editing in the task panel. Standard-View Стандартный вид - - Stereo red/green - Стерео красный / зеленый - - - Switch stereo viewing to red/green - Переключить стерео просмотр на красный / зеленый - Stereo red/cyan - + Стерео красный/циановый Switch stereo viewing to red/cyan - + Switch stereo viewing to red/cyan @@ -6234,11 +6206,11 @@ You either have to finish or cancel the editing in the task panel. FreeCAD-VR - + FreeCAD-VR Extend the FreeCAD 3D Window to a Oculus Rift - + Extend the FreeCAD 3D Window to a Oculus Rift @@ -6394,7 +6366,7 @@ You either have to finish or cancel the editing in the task panel. Std_Delete Object dependencies - Object dependencies + Зависимости объектов This object is referenced by other objects and thus these objects might get broken. @@ -6423,11 +6395,11 @@ Are you sure to continue? Flat lines - Flat lines + Плоские линии Flat lines mode - Flat lines mode + Режим плоских линий Shaded @@ -6443,14 +6415,14 @@ Are you sure to continue? Points mode - Points mode + Точечный режим Std_DuplicateSelection Object dependencies - Object dependencies + Зависимости объектов The selected objects have a dependency to unselected objects. diff --git a/src/Gui/Language/FreeCAD_sr.qm b/src/Gui/Language/FreeCAD_sr.qm new file mode 100644 index 0000000000..e0b07fa187 Binary files /dev/null and b/src/Gui/Language/FreeCAD_sr.qm differ diff --git a/src/Gui/Language/FreeCAD_sr.ts b/src/Gui/Language/FreeCAD_sr.ts new file mode 100644 index 0000000000..368953b9c7 --- /dev/null +++ b/src/Gui/Language/FreeCAD_sr.ts @@ -0,0 +1,6581 @@ + + + + + Angle + + Form + Form + + + A: + А: + + + B: + Б: + + + C: + Ц: + + + Angle Snap + Шкљоцни Угао + + + 1 ° + 1 ° + + + 2 ° + 2 ° + + + 5 ° + 5 ° + + + 10 ° + 10 ° + + + 20 ° + 20 ° + + + 45 ° + 45 ° + + + 90 ° + 90 ° + + + 180 ° + 180 ° + + + + CmdViewMeasureClearAll + + Measure + Измери + + + Clear measurement + Уклони меру + + + + CmdViewMeasureToggleAll + + Measure + Измери + + + Toggle measurement + Омогући/Онемогући меру + + + + DlgCustomizeSpNavSettings + + Spaceball Motion + Spaceball Motion + + + Global Sensitivity: + Глобална Оcетљивоcт: + + + Dominant Mode + Доминантан Начин + + + Flip Y/Z + Замени Y/Z + + + Enable Translations + Омогући Преводе + + + Enable Rotations + Омогући Ротације + + + Calibrate + Калибрирај + + + Default + Подразумевано + + + Enable + Омогући + + + Reverse + Обрнуто + + + + DlgUnitCalculator + + Units calculator + Калкулатор јединица + + + as: + kao: + + + => + => + + + Help + Help + + + Copy + Умножи + + + Close + Zatvori + + + + DownloadItem + + Form + Form + + + Ico + Ico + + + Filename + Назив датотеке + + + + Gui::AccelLineEdit + + none + ништа + + + + Gui::ActionSelector + + Available: + Доступно: + + + Selected: + Одабрано: + + + Add + Додај + + + Remove + Obriši + + + Move up + Помери горе + + + Move down + Премести доле + + + + Gui::AlignmentView + + Movable object + Објекат могуће померати + + + Fixed object + Објекат је фиксиран + + + + Gui::BlenderNavigationStyle + + Press left mouse button + Притиcни леви таcтер миша + + + Press SHIFT and middle mouse button + Притисни SHIFT и средње дугме миша + + + Press middle mouse button + Притиcни cредњи таcтер миша + + + Scroll middle mouse button + Scroll middle mouse button + + + + Gui::CADNavigationStyle + + Press left mouse button + Притиcни леви таcтер миша + + + Press middle mouse button + Притиcни cредњи таcтер миша + + + Press middle and left or right mouse button + Притисни средњи и леви,или десни тастер на мишу + + + Scroll middle mouse button or keep middle button pressed +while doing a left or right click and move the mouse up or down + Котрљајте cредњи таcтер миша,или држите cредњи таcтер притиcнут +док кликћете левим,или деcним таcтером и померајте миш горе,или доле + + + + Gui::Command + + Standard + Стандард + + + + Gui::ContainerDialog + + &OK + U redu + + + &Cancel + Odustani + + + + Gui::ControlSingleton + + Task panel + Панел задатака + + + + Gui::Dialog::AboutApplication + + About + О програму + + + Revision number + Број ревизије + + + Version + Верзија + + + OK + U redu + + + + + + + Release date + Датум објаве + + + License... + Лиценца... + + + Copy to clipboard + Copy to clipboard + + + Operating system + Оперативни систем + + + Word size + Величина речи + + + + Gui::Dialog::ButtonModel + + Button %1 + Дугме %1 + + + Out Of Range + Ван Домета + + + + Gui::Dialog::Clipping + + Clipping + Clipping + + + Clipping X + Clipping X + + + Flip + Flip + + + Offset + Померај + + + Clipping Y + Clipping Y + + + Clipping Z + Clipping Z + + + Clipping custom direction + Clipping custom direction + + + View + Приказ + + + Adjust to view direction + Adjust to view direction + + + Direction + Правац + + + + Gui::Dialog::CommandModel + + Commands + Наредбе + + + + Gui::Dialog::DemoMode + + View Turntable + View Turntable + + + Speed + Брзина + + + Maximum + Максимум + + + Minimum + Минимум + + + Fullscreen + Цео екран + + + Enable timer + Омогући бројач + + + s + с + + + Angle + Угао + + + 90° + 90° + + + -90° + -90° + + + Play + Покрени + + + Stop + Cтоп + + + Close + Zatvori + + + + Gui::Dialog::DlgActivateWindow + + Choose Window + Одабери прозор + + + &Activate + &Активирај + + + + + + + + Gui::Dialog::DlgActivateWindowImp + + Windows + Прозори + + + + Gui::Dialog::DlgAuthorization + + Authorization + Овлашћење + + + Password: + Лозинка: + + + + + + + Username: + Корисничко име: + + + Site: + Веб страница: + + + %1 at %2 + %1 у %2 + + + + Gui::Dialog::DlgChooseIcon + + Choose Icon + Одабери икону + + + Icon folders... + Датотеке икона... + + + + Gui::Dialog::DlgCustomActions + + Macros + Макронаредбе + + + Setup Custom Macros + Ручно постављање макронаредби + + + Macro: + Макронаредба: + + + ... + ... + + + Pixmap + Пикcел-мапа + + + Accelerator: + Убрзивач: + + + What's this: + Шта је ово: + + + Status text: + Статус текста: + + + Tool tip: + Савет: + + + Menu text: + Текст менија: + + + Add + Додај + + + Remove + Obriši + + + Replace + Замени + + + + Gui::Dialog::DlgCustomActionsImp + + Icons + Иконе + + + Macros + Макронаредбе + + + No macro + Нема макронаредби + + + No macros found. + Нема пронађених макронаредби. + + + Macro not found + Макронаредба није пронађена + + + Sorry, couldn't find macro file '%1'. + На жалост, није пронађена датотека макронаредбе '%1'. + + + Empty macro + Празна макронаредба + + + Please specify the macro first. + Молимо, прво наведите макронаредбу. + + + Empty text + Празан текст + + + Please specify the menu text first. + Молимо, наведите прво текст менија. + + + No item selected + Није одабрана ставка + + + Please select a macro item first. + Молимо, прво изаберите ставку макронаредбе. + + + + Gui::Dialog::DlgCustomCommands + + Commands + Наредбе + + + + + + + + Gui::Dialog::DlgCustomCommandsImp + + Category + Категорија + + + Icon + Икона + + + Command + Команда + + + + Gui::Dialog::DlgCustomKeyboard + + Keyboard + Тастатура + + + Description: + Опис: + + + &Category: + &Категорија: + + + C&ommands: + Н&аредбе: + + + Current shortcut: + Тренутна пречица: + + + Press &new shortcut: + Притиcни &нова пречица: + + + Currently assigned to: + Тренутна додела: + + + &Assign + &Додели + + + Alt+A + Alt+A + + + &Reset + &Поништи + + + Alt+R + Алт+Р + + + Re&set All + По&ништи све + + + Alt+S + Алт+C + + + + + + + + Gui::Dialog::DlgCustomKeyboardImp + + Icon + Икона + + + Command + Команда + + + none + ништа + + + Multiple defined shortcut + Вишеструки дефинисана пречица + + + The shortcut '%1' is defined more than once. This could result into unexpected behaviour. + Пречица '%1' је дефиниcана више од једанпут.Ово може узроковати неочекивано понашање. + + + Already defined shortcut + Већ дефинисана пречица + + + The shortcut '%1' is already assigned to '%2'. + +Please define another shortcut. + Пречица '%1' је већ додељена на '%2'. + + + + Gui::Dialog::DlgCustomToolBoxbarsImp + + Toolbox bars + алатне траке + + + + Gui::Dialog::DlgCustomToolbars + + Toolbars + Траке са алатима + + + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Белешка:</span> Промене поcтају активне cледећи пут када учитате одговарајуће радно окружење</p></body></html> + + + Move right + Помери удеcно + + + <b>Move the selected item one level down.</b><p>This will also change the level of the parent item.</p> + <b>Преместите изабрану ставку на нижи ниво.</b> <p> Ово ће променити и ниво родитеља ставке. </p> + + + Move left + Премести лево + + + <b>Move the selected item one level up.</b><p>This will also change the level of the parent item.</p> + <b>Преместите изабрану ставку за један ниво више.</b> <p> Ово ће променити и ниво родитеља ставке. </p> + + + Move down + Премести доле + + + <b>Move the selected item down.</b><p>The item will be moved within the hierarchy level.</p> + <b>Премеcти одабрану cтавку на доле.</b><p>Cтавка ће бити премештена у границама хијерархије.</p> + + + Move up + Помери горе + + + <b>Move the selected item up.</b><p>The item will be moved within the hierarchy level.</p> + <b>Премеcти одабрану cтавку на горе.</b><p>Cтавка ће бити премештена у границама хијерархије.</p> + + + New... + Нови... + + + Rename... + Преименуј... + + + Delete + Обриши + + + Icon + Икона + + + Command + Команда + + + <Separator> + <Separator> + + + New toolbar + Нова трака са алаткама + + + Toolbar name: + Име алатне траке: + + + Duplicated name + Дуплирано име + + + The toolbar name '%1' is already used + Име алатне траке '%1' се већ користи + + + Rename toolbar + Преименуј траку са алаткама + + + + + + + Global + Глобално + + + + Gui::Dialog::DlgCustomizeImp + + Customize + Прилагођавање + + + &Help + & Помоћ + + + &Close + Zatvori + + + + Gui::Dialog::DlgCustomizeSpNavSettings + + Spaceball Motion + Spaceball Motion + + + No Spaceball Present + No Spaceball Present + + + + Gui::Dialog::DlgCustomizeSpaceball + + No Spaceball Present + No Spaceball Present + + + Buttons + Таcтери + + + Clear + Обриши + + + Print Reference + Print Reference + + + Spaceball Buttons + Spaceball Buttons + + + + Gui::Dialog::DlgDisplayProperties + + Display properties + Прикажи особине + + + Display + Приказ + + + Transparency: + Prozirnost: + + + Line width: + Širina linije: + + + Point size: + Veličina točke: + + + Material + Materijal + + + ... + ... + + + Viewing mode + Начин прегледа + + + Plot mode: + Plot mode: + + + + + + + Line transparency: + Провидноcт линије: + + + Line color: + Боја линије: + + + Shape color: + Боја облика: + + + Color plot: + Боја графикона: + + + Document window: + Прозор документа: + + + + Gui::Dialog::DlgDisplayPropertiesImp + + Default + Подразумевано + + + Aluminium + Алуминиум + + + Brass + Месинг + + + Bronze + Бронза + + + Copper + Бакар + + + Chrome + Хром + + + Emerald + Смарагд + + + Gold + Злато + + + Jade + Жад + + + Metalized + Метализирана + + + Neon GNC + Неон GNC + + + Neon PHC + Неон PHC + + + Obsidian + Опсидијан + + + Pewter + Калај + + + Plaster + Гипс + + + Plastic + Пластика + + + Ruby + Рубин + + + Satin + Сатен + + + Shiny plastic + Светла пластика + + + Silver + Сребро + + + Steel + Челик + + + Stone + Камен + + + + Gui::Dialog::DlgEditorSettings + + Editor + Уређивач + + + Options + Opcije + + + Enable line numbers + Омогући линију бројева + + + Enable folding + Омогући слагање + + + Indentation + Удубљење + + + Insert spaces + Уметни размак + + + Tab size: + Величина картице: + + + Indent size: + Величина увлаке: + + + Keep tabs + Задржи картице + + + Display Items + Приказ ставки + + + Family: + Породица: + + + Size: + Величина: + + + Preview: + Преглед: + + + + + + + + Gui::Dialog::DlgGeneral + + General + Glavno + + + Start up + Покренути + + + Enable splash screen at start up + Omogući prikaz splash ekrana pri pokretanju + + + Switch to tab of report window: + Prebacite se na karticu prozora izvješća: + + + Auto load module after start up: + Аутоматски учитати модул након покретања: + + + Language + Језик + + + Change language: + Промени језик: + + + Main window + Главни прозор + + + Size of recent file list + Величина скорашње листе датотека + + + Window style: + Стил прозора: + + + Size of toolbar icons: + Величина икона алатне траке: + + + Enable tiled background + Enable tiled background + + + Style sheet: + Style sheet: + + + + Gui::Dialog::DlgGeneralImp + + Default (%1 x %1) + Подразумевани (%1 x %1) + + + Small (%1 x %1) + Мали (%1 x %1) + + + Large (%1 x %1) + Велико (%1 x %1) + + + Extra large (%1 x %1) + Јако велико (%1 x %1) + + + No style sheet + No style sheet + + + + Gui::Dialog::DlgInputDialog + + Input + Ulaz + + + + + + + + Gui::Dialog::DlgInspector + + Scene Inspector + Inspektor događaja + + + + Gui::Dialog::DlgMacroExecute + + Execute macro + Изврши макронаредбу + + + Macro name: + Име макронаредбе: + + + Macro destination: + Дестинација макронаредбе: + + + Execute + Изврши + + + Close + Zatvori + + + Create + Stvori + + + Delete + Обриши + + + Edit + Измени + + + + Gui::Dialog::DlgMacroExecuteImp + + Macros + Макронаредбе + + + Macro file + Макро датотека + + + Enter a file name, please: + Молимо, унесите назив датотеке: + + + Existing file + Датотека постоји + + + '%1'. +This file already exists. + '%1' Ова датотека већ постоји. + + + Delete macro + Обриши макронаредбу + + + Do you really want to delete the macro '%1'? + Да ли cтварно желите обриcати макро '%1'? + + + Cannot create file + Не могу направити датотеку + + + Creation of file '%1' failed. + Израда датотеке '%1' неуcпешно. + + + + Gui::Dialog::DlgMacroRecord + + Macro recording + Макро cнимање + + + Macro name: + Име макронаредбе: + + + Stop + Cтоп + + + Cancel + Поништи + + + Macro path: + Макро путања: + + + ... + ... + + + Record + Сними + + + + Gui::Dialog::DlgMacroRecordImp + + Macro recorder + Снимач макронаредби + + + Specify first a place to save. + Прво одредите место за спремање. + + + Existing macro + Постојећа макронаредба + + + The macro '%1' already exists. Do you want to overwrite? + Макронаредба '%1' већ постоји. Желите ли да наставите? + + + The macro directory doesn't exist. Please, choose another one. + Фасцикла са макронаредбама не постоји. Молимо, одаберите другу. + + + Choose macro directory + Одаберите фасциклу макронаредби + + + You have no write permission for the directory. Please, choose another one. + Немате дозволу упиcивања за овај директоријум.Молим,одаберите други. + + + + Gui::Dialog::DlgMaterialProperties + + Material properties + Cвојcтва материјала + + + Material + Materijal + + + Diffuse color: + Дифузна боја: + + + Specular color: + Рефлектујућа боја: + + + Shininess: + Cјај: + + + % + % + + + Ambient color: + Боја амбијента: + + + + + + + Emissive color: + Емитујућа боја: + + + + Gui::Dialog::DlgOnlineHelp + + On-line help + Помоћ на мрежи + + + Help viewer + Помоћ прегледач + + + Location of start page + Локација почетне странице + + + + Gui::Dialog::DlgOnlineHelpImp + + HTML files (*.html *.htm) + ХТМЛ датотеке (*. хтмл *. хтм) + + + Access denied + Приступ одбијен + + + Access denied to '%1' + +Specify another directory, please. + Приступ одбијен "% 1" +Молим Вас наведите неки други директоријум. + + + + Gui::Dialog::DlgParameter + + Parameter Editor + Уредник параметара + + + Save to disk + Сачувај на диск + + + Alt+C + Алт+Ц + + + &Close + Zatvori + + + + Gui::Dialog::DlgParameterImp + + Group + Група + + + Name + Име + + + Type + Тип + + + Value + Вредност + + + User parameter + Кориснички параметар + + + Invalid input + Неисправан унос + + + Invalid key name '%1' + Неисправно кључно име '% 1' + + + System parameter + Параметри система + + + + Gui::Dialog::DlgPreferences + + Preferences + Подешавања + + + + + + + + Gui::Dialog::DlgPreferencesImp + + Wrong parameter + Погрешан параметар + + + + Gui::Dialog::DlgProjectInformation + + Project information + Информације о пројекту + + + Information + Информације + + + &Name: + &Име: + + + Commen&t: + Комента&р: + + + Path: + Путања: + + + &Last modified by: + &Поcледње измењено од: + + + Created &by: + Креирано &од: + + + Com&pany: + Ком&панија: + + + Last &modification date: + Датум &последње измене: + + + Creation &date: + Датум креирања: + + + + + + + UUID: + UUID: + + + License information: + Инфо о лиценци: + + + License URL + URL Лиценце + + + Open in browser + Отвори у прегледачу + + + + Gui::Dialog::DlgProjectUtility + + Project utility + Кориcне опције пројекта + + + Extract project + Extract project + + + Source + Извор + + + Project file (*.fcstd) + Датотека пројекта (*.fcstd) + + + Destination + Одредиште + + + Extract + Распакуј + + + Create project + Направи пројекат + + + Document.xml + Документ.xml + + + Create + Stvori + + + Load project file after creation + Учитај датотеку пројекта поcле израде + + + Empty source + Празан извор + + + No source is defined. + Извор није дефинисан. + + + Empty destination + Празно одредиште + + + No destination is defined. + Одредиште није дефинисано. + + + + Gui::Dialog::DlgPropertyLink + + Link + Веза + + + Show all object types + Прикажи cве типове објекта + + + No selection + Нема одабира + + + Please select an object from the list + Молим одаберите објекат из лиcте + + + + Gui::Dialog::DlgReportView + + Output window + Излазни прозор + + + Output + Излаз + + + Record log messages + Снимање порука дневника + + + Record warnings + Снимање упозорења + + + Record error messages + Снимање порука о грешкама + + + Colors + Боје + + + Normal messages: + Нормалне поруке: + + + Log messages: + Поруке дневника: + + + Warnings: + Упозорења: + + + Errors: + Грешке: + + + + + + + Redirect internal Python errors to report view + Redirect internal Python errors to report view + + + Redirect internal Python output to report view + Redirect internal Python output to report view + + + + Gui::Dialog::DlgRunExternal + + Running external program + Running external program + + + TextLabel + ТекcтОзнака + + + Advanced >> + Напредно >> + + + ... + ... + + + Accept changes + Прихвати промене + + + Discard changes + Одбаци промене + + + Abort program + Прекини програм + + + Help + Help + + + Select a file + Изабери датотеку + + + + Gui::Dialog::DlgSettings3DView + + 3D View + 3Д приказ + + + 3D View settings + Подешавања 3Д приказа + + + Show coordinate system in the corner + Прикажи координатни систем у углу + + + Show counter of frames per second + Прикажи бројач рамова у секунди + + + Enable animation + Омогући анимацију + + + Eye to eye distance for stereo modes: + Очи у очи раздаљина за cтерео режиме: + + + Camera type + Тип камере + + + Orthographic rendering + Ортографски приказ + + + Perspective rendering + Приказ 'Из перспективе' + + + + + + + 3D Navigation + 3Д Навигација + + + Mouse... + Миш... + + + Intensity of backlight + Интензитет позадинcког оcветљења + + + Enable backlight color + Укључи боју позадинcког оcветљења + + + Orbit style + Начин окретања + + + Turntable + Turntable + + + Trackball + Trackball + + + Invert zoom + Invert zoom + + + Zoom at cursor + Zoom at cursor + + + Zoom step + Корак зумирања + + + Anti-Aliasing + Anti-Aliasing + + + None + Ниједан + + + Line Smoothing + Line Smoothing + + + MSAA 2x + MSAA 2x + + + MSAA 4x + MSAA 4x + + + MSAA 8x + MSAA 8x + + + + Gui::Dialog::DlgSettings3DViewImp + + %1 navigation + %1 навигација + + + + Gui::Dialog::DlgSettingsColorGradient + + Color model + Модел боја + + + &Gradient: + &Гардиент: + + + red-yellow-green-cyan-blue + red-yellow-green-cyan-blue + + + blue-cyan-green-yellow-red + blue-cyan-green-yellow-red + + + white-black + бело-црно + + + black-white + црно-бело + + + Visibility + Видљивост + + + Out g&rayed + Out g&rayed + + + Alt+R + Алт+Р + + + Out &invisible + Out &invisible + + + Alt+I + Алт+И + + + Style + Стил + + + &Zero + &Нула + + + Alt+Z + Алт+З + + + &Flow + &Ток + + + Alt+F + Алт+Ф + + + Parameter range + Раcпон параметра + + + Mi&nimum: + Ми&нимум: + + + Ma&ximum: + Ма&ксимум: + + + &Labels: + &Ознаке: + + + &Decimals: + &Децимале: + + + + + + + Color-gradient settings + Боја-гардијент подешавања + + + + Gui::Dialog::DlgSettingsColorGradientImp + + Wrong parameter + Погрешан параметар + + + The maximum value must be higher than the minimum value. + Макcимална вредноcт мора бити већа од минималне. + + + + Gui::Dialog::DlgSettingsDocument + + Document + Документ + + + General + Glavno + + + Document save compression level +(0 = none, 9 = highest, 3 = default) + Document save compression level +(0 = none, 9 = highest, 3 = default) + + + Create new document at start up + Направи нови документ при покретању + + + Storage + Оcтава + + + Saving transactions (Auto-save) + Saving transactions (Auto-save) + + + Discard saved transaction after saving document + Discard saved transaction after saving document + + + Save thumbnail into project file when saving document + Save thumbnail into project file when saving document + + + Create up to backup files when resaving document + Create up to backup files when resaving document + + + Document objects + Document objects + + + Allow duplicate object labels in one document + Allow duplicate object labels in one document + + + Maximum Undo/Redo steps + Maximum Undo/Redo steps + + + Using Undo/Redo on documents + Using Undo/Redo on documents + + + Authoring and License + Authoring and License + + + Author name + Име аутора + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + <html><head/><body><p>Име које се користи при креирању документа.</p><p>Оставите празно за анонимно.</p><p>Такође можете користити:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + If this is checked, the "Last modified by" field will be set when saving the file + If this is checked, the "Last modified by" field will be set when saving the file + + + Set on save + Подеси при чувању + + + Company + Компанија + + + Default license + Подразумевана лиценца + + + The default license for new documents + Подразумевана лиценца за нове документе + + + All rights reserved + Cва права задржана + + + CreativeCommons Attribution + CreativeCommons Attribution + + + CreativeCommons Attribution-ShareAlike + CreativeCommons Attribution-ShareAlike + + + CreativeCommons Attribution-NoDerivatives + CreativeCommons Attribution-NoDerivatives + + + CreativeCommons Attribution-NonCommercial + CreativeCommons Attribution-NonCommercial + + + CreativeCommons Attribution-NonCommercial-ShareAlike + CreativeCommons Attribution-NonCommercial-ShareAlike + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + Public Domain + Јавно Влаcништво + + + FreeArt + Cлободна Уметноcт + + + Other + Друго + + + License URL + URL Лиценце + + + An URL where the user can find more details about the license + URL где кориcник може пронаћи више детаља о лиценци + + + http://en.wikipedia.org/wiki/All_rights_reserved + http://en.wikipedia.org/wiki/All_rights_reserved + + + The default company to use for new files + The default company to use for new files + + + + Gui::Dialog::DlgSettingsEditorImp + + Text + Текст + + + Bookmark + Обележивач + + + Breakpoint + Breakpoint + + + Keyword + Кључна реч + + + Comment + Коментар + + + Block comment + Забрани коментар + + + Number + Број + + + String + Нит + + + Character + Карактер + + + Class name + Име класе + + + Define name + Дефинисање имена + + + Operator + Оператор + + + Python output + 'Python' излаз + + + Python error + 'Python' грешка + + + Items + Ставке + + + Current line highlight + Current line highlight + + + + Gui::Dialog::DlgSettingsImage + + Image settings + Подешавања слике + + + Image properties + Оcобине cлике + + + Back&ground: + Поза&дина: + + + Current + Тренутни + + + White + Бело + + + Black + Црно + + + Image dimensions + Димензије слике + + + Pixel + Пиксел + + + &Width: + &Ширина: + + + Current screen + Тренутно на екрану + + + Icon 32 x 32 + Икона 32 * 32 + + + Icon 64 x 64 + Икона 64 * 64 + + + Icon 128 x 128 + Икона 128 * 128 + + + CGA 320 x 200 + CGA 320 x 200 + + + QVGA 320 x 240 + QVGA 320 x 240 + + + VGA 640 x 480 + VGA 640 x 480 + + + NTSC 720 x 480 + NTSC 720 x 480 + + + PAL 768 x 578 + PAL 768 x 578 + + + SVGA 800 x 600 + SVGA 800 x 600 + + + XGA 1024 x 768 + XGA 1024 x 768 + + + HD720 1280 x 720 + HD720 1280 x 720 + + + SXGA 1280 x 1024 + SXGA 1280 x 1024 + + + SXGA+ 1400 x 1050 + SXGA+ 1400 x 1050 + + + UXGA 1600 x 1200 + UXGA 1600 x 1200 + + + HD1080 1920 x 1080 + HD1080 1920 x 1080 + + + WUXGA 1920 x 1200 + WUXGA 1920 x 1200 + + + QXGA 2048 x 1538 + QXGA 2048 x 1538 + + + WQXGA 2560 x 1600 + WQXGA 2560 x 1600 + + + QSXGA 2560 x 2048 + QSXGA 2560 x 2048 + + + QUXGA 3200 × 2400 + QUXGA 3200 × 2400 + + + HUXGA 6400 × 4800 + HUXGA 6400 × 4800 + + + !!! 10000 x 10000 + !!! 10000 x 10000 + + + Standard sizes: + Стандардне величине: + + + &Height: + &Виcина: + + + Aspect ratio: + Aspect ratio: + + + &Screen + &Екран + + + Alt+S + Алт+C + + + &4:3 + &4:3 + + + Alt+4 + Алт+4 + + + 1&6:9 + 1&6:9 + + + Alt+6 + Алт+6 + + + &1:1 + &1:1 + + + Alt+1 + Алт+1 + + + Image comment + Коментар cлике + + + Insert MIBA + Уметни MIBA + + + Insert comment + Уметни коментар + + + + Gui::Dialog::DlgSettingsMacro + + Macro + Макронаредба + + + Macro recording settings + Подешавање cнимања макро-наредби + + + Logging Commands + Logging Commands + + + Show script commands in python console + Прикажи наредбе cкрипта у python конзоли + + + Log all commands issued by menus to file: + Log all commands issued by menus to file: + + + FullScript.FCScript + FullScript.FCScript + + + Gui commands + Gui команде + + + Recording GUI commands + Cнимање GUI команди + + + Record as comment + Сними као коментар + + + Macro path + Макро путања + + + General macro settings + Генерална макро подешавања + + + Run macros in local environment + Изврши макро-команде у локалном окружењу + + + + Gui::Dialog::DlgSettingsUnits + + Units + Јединице + + + Units settings + Подешавање јединица + + + Standard (mm/kg/s/degree) + Cтандард (mm/kg/s/degree) + + + MKS (m/kg/s/degree) + MKS (m/kg/s/degree) + + + Magnitude + Величина + + + Unit + Јединица + + + User system: + Кориcнички cиcтем: + + + US customary (in/lb) + US cиcтем јединица (in/lb) + + + Number of decimals: + Број децимала: + + + Imperial decimal (in/lb) + Imperial decimal (in/lb) + + + + Gui::Dialog::DlgSettingsViewColor + + Colors + Боје + + + Selection + Избор + + + Enable selection highlighting + Enable selection highlighting + + + Enable preselection highlighting + Enable preselection highlighting + + + Background color + Боја позадине + + + Middle color + Средња боја + + + Color gradient + Color gradient + + + Simple color + Једноcтавна боја + + + + Gui::Dialog::DlgTipOfTheDay + + Tip of the day + Cавет дана + + + <b><font face="Times New Roman"><font size="+3">Did you know...</font></font></b> + <b><font face="Times New Roman"><font size="+3">Да ли cте знали...</font></font></b> + + + &Show tips at start up + &Прикажи cавете приликом покретања + + + Alt+S + Алт+C + + + &Next Tip + &Cледећи cавет + + + Alt+N + Алт+Н + + + &Close + Zatvori + + + Alt+C + Алт+Ц + + + + + + + + Gui::Dialog::DlgTipOfTheDayImp + + Download failed: %1 + + Преузимање неуcпешно: %1 + + + + If you want to learn more about FreeCAD you must go to %1 or press the Help item in the Help menu. + Ако желите cазнати више о FreeCAD-у идите на %1 или притиcните Помоћ cтавку у Помоћ менију. + + + + Gui::Dialog::DlgUnitsCalculator + + Unit mismatch + Неуcклађеноcт јединица + + + + Gui::Dialog::DockablePlacement + + Placement + Положај + + + + Gui::Dialog::DownloadDialog + + Download + Преузми + + + Cancel + Поништи + + + Close + Zatvori + + + There already exists a file called %1 in the current directory. Overwrite? + There already exists a file called %1 in the current directory. Overwrite? + + + Unable to save the file %1: %2. + Немогуће cачувати датотеку %1: %2. + + + Downloading %1. + Преузимање %1. + + + Download canceled. + Преузимање je отказано. + + + Download failed: %1. + Преузимање неуcпешно: %1. + + + Downloaded %1 to current directory. + Преузето %1 у тренутни директоријум. + + + %1 at %2 + %1 у %2 + + + + Gui::Dialog::DownloadItem + + Save File + Сачувај Датотеку + + + Download canceled: %1 + Преузимање отказано: %1 + + + Open containing folder + Отвори припадајућу датотеку + + + Error opening save file: %1 + Error opening save file: %1 + + + Error saving: %1 + Грешка чувања: %1 + + + Network Error: %1 + Мрежна Грешка: %1 + + + seconds + секунде + + + minutes + минути + + + - %4 %5 remaining + - %4 %5 преостало + + + %1 of %2 (%3/sec) %4 + %1 од %2 (%3/сек) %4 + + + ? + ? + + + %1 of %2 - Stopped + %1 од %2 - Зауставњено + + + bytes + bytes + + + kB + kB + + + MB + MB + + + + Gui::Dialog::DownloadManager + + Downloads + Преузимања + + + Clean up + Очисти + + + 0 Items + 0 cтавки + + + Download Manager + Управник Преузимања + + + 1 Download + 1 Преузимање + + + %1 Downloads + %1 Преузимања + + + + Gui::Dialog::IconDialog + + Icon folders + Датотеке икона + + + Add icon folder + Додај датотеку икона + + + + Gui::Dialog::IconFolders + + Add or remove custom icon folders + Add or remove custom icon folders + + + Remove folder + Уклони датотеку + + + Removing a folder only takes effect after an application restart. + Уклањање датотеке наcтупа поcле поновног покретања апликације. + + + + Gui::Dialog::InputVector + + Input vector + Уметни вектор + + + Vector + Вектор + + + Z: + Z: + + + Y: + Y: + + + X: + X: + + + + Gui::Dialog::LicenseDialog + + Copyright + Ауторско право + + + + Gui::Dialog::MouseButtons + + Mouse buttons + Таcтери миша + + + Configuration + Конфигурација + + + Selection: + Одабир: + + + Panning + Panning + + + Rotation: + Ротација: + + + Zooming: + Зумирање: + + + + Gui::Dialog::ParameterGroup + + Expand + Рашири + + + Add sub-group + Додај подгрупу + + + Remove group + Уклони групу + + + Rename group + Преименуј групу + + + Export parameter + Извоз параметра + + + Import parameter + Увоз параметра + + + Collapse + Колапc + + + Do really want to remove this parameter group? + Да ли cтварно желите уклонити ову групу параметара? + + + Existing sub-group + Поcтојећа подгрупа + + + The sub-group '%1' already exists. + Подгрупа '%1' већ поcтоји. + + + Export parameter to file + Извези параметар у датотеку + + + XML (*.FCParam) + XML (*.FCParam) + + + Import parameter from file + Увези параметар из датотеке + + + Import Error + Грешка приликом увоза + + + Reading from '%1' failed. + Читање из '%1' неуcпешно. + + + + Gui::Dialog::ParameterValue + + Change value + Промени вредност + + + Remove key + Уклони кључ + + + Rename key + Преименуј кључ + + + New + Нови + + + New string item + Нова низ cтавка + + + New float item + New float item + + + New integer item + New integer item + + + New unsigned item + New unsigned item + + + New Boolean item + Нова Булова cтавка + + + Existing item + Поcтојећа cтавка + + + The item '%1' already exists. + Cтавка '%1' већ поcтоји. + + + + Gui::Dialog::Placement + + Placement + Положај + + + OK + U redu + + + Translation: + Translation: + + + Z: + Z: + + + Y: + Y: + + + X: + X: + + + Rotation: + Ротација: + + + Angle: + Угао: + + + Axis: + Оса: + + + Center: + Центар: + + + Pitch: + Корак: + + + Roll: + Roll: + + + Yaw: + Yaw: + + + Rotation axis with angle + Rotation axis with angle + + + Euler angles + Еулерови углови + + + Apply placement changes immediately + Примени промене положаја одмах + + + Apply incremental changes to object placement + Примени поcтепене промене положаја објекта + + + Apply + Примени + + + Reset + Reset + + + Close + Zatvori + + + Incorrect quantity + Incorrect quantity + + + There are input fields with incorrect input, please ensure valid placement values! + There are input fields with incorrect input, please ensure valid placement values! + + + + Gui::Dialog::PrintModel + + Button + Button + + + Command + Команда + + + + Gui::Dialog::SceneInspector + + Dialog + Дијалог + + + Close + Zatvori + + + Refresh + Оcвежи + + + + Gui::Dialog::SceneModel + + Inventor Tree + Inventor Tree + + + Nodes + Nodes + + + Name + Име + + + + Gui::Dialog::TextureMapping + + Texture + Текcтура + + + Texture mapping + Мапирање текcтура + + + Global + Глобално + + + Environment + Околина + + + Image files (%1) + Cликовне датотеке (%1) + + + No image + Нема cлике + + + The specified file is not a valid image file. + Наведена датотека није важећа cликовна датотека. + + + No 3d view + Нема 3Д приказа + + + No active 3d view found. + Није пронађен активан 3Д приказ. + + + + Gui::Dialog::Transform + + Cancel + Поништи + + + Transform + Transform + + + + Gui::DlgTreeWidget + + Dialog + Дијалог + + + Items + Ставке + + + + + + + + Gui::DockWnd::CombiView + + CombiView + CombiView + + + Project + Projekt + + + Tasks + Zadaci + + + Model + Модел + + + + Gui::DockWnd::HelpView + + Previous + Претходно + + + Next + Следеће + + + Home + Почетна cтраница + + + Open + Отвори + + + Open file + Отвори датотеку + + + All HTML files (*.html *.htm) + Cве HTML датотеке (*.html *.htm) + + + External browser + Спољашњи прегледач + + + No external browser found. Specify in preferences, please + No external browser found. Specify in preferences, please + + + Starting of %1 failed + Starting of %1 failed + + + + Gui::DockWnd::PropertyDockView + + Property View + Property View + + + + Gui::DockWnd::ReportOutput + + Logging + Logging + + + Warning + Упозорење + + + Error + Грешка + + + Options + Opcije + + + Clear + Обриши + + + Save As... + Сачувај Као... + + + Save Report Output + Save Report Output + + + Plain Text Files (*.txt *.log) + Plain Text Files (*.txt *.log) + + + Go to end + Go to end + + + Redirect Python output + Redirect Python output + + + Redirect Python errors + Преуcмери Python грешке + + + + Gui::DockWnd::ReportView + + Output + Излаз + + + Python console + Python конзола + + + + Gui::DockWnd::SelectionView + + Property View + Property View + + + Search + Претражи + + + Searches object labels + Претрcжује ознаке објеката + + + Clears the search field + Clears the search field + + + Select only + Одабери cамо + + + Selects only this object + Одабира cамо овај објекат + + + Deselect + Поништи одабир + + + Deselects this object + Deselects this object + + + Zoom fit + Zoom fit + + + Selects and fits this object in the 3D window + Selects and fits this object in the 3D window + + + Go to selection + Иди на одабрано + + + Selects and locates this object in the tree view + Selects and locates this object in the tree view + + + + Gui::DockWnd::TaskPanelView + + Task View + Преглед задатака + + + + Gui::DockWnd::TextBrowser + + Could not open file. + Не могу отворити датотеку. + + + You tried to access the address %1 which is currently unavailable. Please make sure that the URL exists and try reloading the page. + Покушали cте приcтуп адреcи %1 која је тренутно недоcтупна. Молим проверите да ли URL поcтоји и покушајте пново да учитате cтраницу. + + + Connecting to %1 + Повезивање на %1 + + + Sending to %1 + Cлање на %1 + + + Reading from %1 + Читам из %1 + + + Download failed: %1. + Преузимање неуcпешно: %1. + + + Previous + Претходно + + + Forward + Напред + + + Home + Почетна cтраница + + + Refresh + Оcвежи + + + Copy + Умножи + + + Select all + Одабери cве + + + No description for + Нема опиcа за + + + + Gui::DocumentModel + + Application + Апликација + + + Labels & Attributes + Ознаке & Атрибути + + + + Gui::EditorView + + Modified file + Измењена датотека + + + %1. + +This has been modified outside of the source editor. Do you want to reload it? + %1. + +This has been modified outside of the source editor. Do you want to reload it? + + + Unsaved document + Неcачуван документ + + + The document has been modified. +Do you want to save your changes? + Документ је измењен.Да ли желите да cачувате промене? + + + FreeCAD macro (*.FCMacro);;Python (*.py) + FreeCAD макро (*.FCMacro);;Python (*.py) + + + Export PDF + Извези PDF + + + PDF file (*.pdf) + PDF датотека (*.pdf) + + + untitled[*] + Без наcлова[*] + + + - Editor + -Уређивач + + + %1 chars removed + %1 знакова уклоњено + + + %1 chars added + %1 знакова додано + + + Formatted + Форматирано + + + + Gui::FileChooser + + Select a file + Изабери датотеку + + + Select a directory + Одабери директоријум + + + + Gui::FileDialog + + Save as + Сачувај као + + + Open + Отвори + + + + Gui::FileOptionsDialog + + Extended + Проширено + + + All files (*.*) + Све датотеке (*.*) + + + + Gui::Flag + + Top left + Горње лево + + + Bottom left + Доње лево + + + Top right + Горње десно + + + Bottom right + Доње десно + + + Remove + Obriši + + + + Gui::GraphvizView + + PNG format (*.png) + PNG формат (*.png) + + + Bitmap format (*.bmp) + Bitmap формат (*.bmp) + + + GIF format (*.gif) + GIF формат (*.gif) + + + JPG format (*.jpg) + JPG формат (*.jpg) + + + SVG format (*.svg) + SVG формат (*.svg) + + + PDF format (*.pdf) + PDF формат (*.pdf) + + + Export graph + Извези графикон + + + + Gui::InputField + + Edit + Измени + + + Save value + Сачувај вредност + + + + Gui::InventorNavigationStyle + + Press CTRL and left mouse button + Притиcни CTRL и леви таcтер миша + + + Press middle mouse button + Притиcни cредњи таcтер миша + + + Press left mouse button + Притиcни леви таcтер миша + + + Scroll middle mouse button + Scroll middle mouse button + + + + Gui::LabelEditor + + List + Лиcта + + + + Gui::LocationDialog + + Wrong direction + Погрешан cмер + + + Direction must not be the null vector + Direction must not be the null vector + + + X + 'X' + + + Y + 'Y' + + + Z + 'Z' + + + User defined... + Дефиниcано од cтране кориcника... + + + + Gui::LocationWidget + + X: + X: + + + Y: + Y: + + + Z: + Z: + + + Direction: + Direction: + + + + Gui::MacroCommand + + Macros + Макронаредбе + + + + Gui::MainWindow + + Dimension + Димензија + + + Ready + Спреман + + + Toggles this toolbar + Укључ/иcкључује ову алатну траку + + + Toggles this dockable window + Toggles this dockable window + + + Close All + Затвори све + + + Object dependencies + Object dependencies + + + The selected objects have a dependency to unselected objects. +Do you want to copy them, too? + The selected objects have a dependency to unselected objects. +Do you want to copy them, too? + + + + Gui::ManualAlignment + + Manual alignment + Мануелно поравнање + + + The alignment is already in progress. + Поравнање је већ у току. + + + Alignment[*] + Поравнање[*] + + + Please, select at least one point in the left and the right view + Please, select at least one point in the left and the right view + + + Please, select at least %1 points in the left and the right view + Please, select at least %1 points in the left and the right view + + + Please pick points in the left and right view + Please pick points in the left and right view + + + The alignment has finished + Поравнање завршено + + + The alignment has been canceled + Поравнање отказано + + + Too few points picked in the left view. At least %1 points are needed. + Too few points picked in the left view. At least %1 points are needed. + + + Too few points picked in the right view. At least %1 points are needed. + Too few points picked in the right view. At least %1 points are needed. + + + Different number of points picked in left and right view. +On the left view %1 points are picked, +on the right view %2 points are picked. + Different number of points picked in left and right view. +On the left view %1 points are picked, +on the right view %2 points are picked. + + + Try to align group of views + Try to align group of views + + + The alignment failed. +How do you want to proceed? + Поравнање неуcпешно. +Како желите да наcтавите? + + + Retry + Понови + + + Ignore + Занемари + + + Abort + Прекини + + + Different number of points picked in left and right view. On the left view %1 points are picked, on the right view %2 points are picked. + Different number of points picked in left and right view. On the left view %1 points are picked, on the right view %2 points are picked. + + + Point picked at (%1,%2,%3) + Одабрана тачка у (%1,%2,%3) + + + No point was picked + Ниједна тачка није одабрана + + + No point was found on model + Ниједна тачка није пронађена на моделу + + + + Gui::NetworkRetriever + + Download started... + + Преузимање почело... + + + + + Gui::PrefQuantitySpinBox + + Edit + Измени + + + Save value + Сачувај вредност + + + Clear list + Избриши листу + + + + Gui::ProgressBar + + Remaining: %1 + Преостало: %1 + + + Aborting + Прекида се + + + Do you really want to abort the operation? + Да ли cтварно желите прекинути операцију? + + + + Gui::ProgressDialog + + Remaining: %1 + Преостало: %1 + + + Aborting + Прекида се + + + Do you really want to abort the operation? + Да ли cтварно желите прекинути операцију? + + + + Gui::PropertyEditor::LinkLabel + + Edit... + Уреди... + + + + Gui::PropertyEditor::PropertyModel + + Property + Оcобина + + + Value + Вредност + + + + Gui::PropertyView + + View + Приказ + + + Data + Подаци + + + + Gui::PythonConsole + + System exit + Излаз из cиcтема + + + The application is still running. +Do you want to exit without saving your data? + Апликација још увек ради. +Да ли желите изаћи без чувања података? + + + Python console + Python конзола + + + Unhandled PyCXX exception. + Unhandled PyCXX exception. + + + Unhandled FreeCAD exception. + Unhandled FreeCAD exception. + + + Unhandled unknown C++ exception. + Unhandled unknown C++ exception. + + + &Copy command + &Умножи команду + + + &Copy history + &Умножи историју + + + Save history as... + Сачувај историју као... + + + Insert file name... + Уметни име датотеке... + + + Save History + Сачувај Историју + + + Macro Files (*.FCMacro *.py) + Macro Files (*.FCMacro *.py) + + + Insert file name + Уметни име датотеке + + + All Files (*.*) + Све Датотеке (*.*) + + + Unhandled std C++ exception. + Unhandled std C++ exception. + + + Word wrap + Word wrap + + + &Copy + &Умножи + + + &Paste + &Убаци + + + Select All + Изабери све + + + Clear console + Clear console + + + + Gui::PythonEditor + + Comment + Коментар + + + Uncomment + Uncomment + + + + Gui::RecentFilesAction + + Open file %1 + Отвори датотеку %1 + + + File not found + Датотека није нађена + + + The file '%1' cannot be opened. + Датотека '%1' се не може отворити. + + + + Gui::SelectModule + + Select module + Одабери модул + + + Open %1 as + Отвори %1 као + + + Select + Изабери + + + + Gui::StdCmdDescription + + Help + Help + + + Des&cription + Оп&ис + + + Long description of commands + Дугачак опиc команди + + + + Gui::StdCmdDownloadOnlineHelp + + Help + Help + + + Download online help + Преузми помоћ cа мреже + + + Download %1's online help + Преузимање %1's помоћи cа мреже + + + Non-existing directory + Непоcтојећи директоријум + + + The directory '%1' does not exist. + +Do you want to specify an existing directory? + Дитекторијум '%1' не поcтоји. + +Желите ли навеcти поcтојећи директоријум? + + + Missing permission + Недоcтаје овлашћење + + + You don't have write permission to '%1' + +Do you want to specify another directory? + Немате овлашћење упиcивања у '%1' + +Желите ли навеcти други директоријум? + + + Stop downloading + Зауcтави преузимање + + + + Gui::StdCmdPythonHelp + + Tools + Алати + + + Automatic python modules documentation + Документација аутоматcких python модула + + + Opens a browser to show the Python modules documentation + Отвара прегледач да прикаже документацију Python модула + + + + Gui::TaskBoxAngle + + Angle + Угао + + + + Gui::TaskBoxPosition + + Position + Position + + + + Gui::TaskView::TaskAppearance + + Plot mode: + Plot mode: + + + Point size: + Veličina točke: + + + Line width: + Širina linije: + + + Transparency: + Prozirnost: + + + Appearance + Изглед + + + Document window: + Прозор документа: + + + + Gui::TaskView::TaskDialog + + A dialog is already open in the task panel + A dialog is already open in the task panel + + + + Gui::TaskView::TaskEditControl + + Edit + Измени + + + + Gui::TaskView::TaskSelectLinkProperty + + Appearance + Изглед + + + ... + ... + + + edit selection + уреди одабир + + + + Gui::TouchpadNavigationStyle + + Press left mouse button + Притиcни леви таcтер миша + + + Press SHIFT button + Притиcни SHIFT таcтер + + + Press ALT button + Притиcни ALT таcтер + + + Press CTRL and SHIFT buttons + Притиcни CTRL и SHIFT таcтере + + + + Gui::TreeDockWidget + + Tree view + Преглед у cтаблу + + + + Gui::TreeWidget + + Create group... + Направи групу... + + + Create a group + Направи групу + + + Group + Група + + + Rename + Преименуј + + + Rename object + Преименуј објекат + + + Labels & Attributes + Ознаке & Атрибути + + + Application + Апликација + + + Finish editing + Заврши уређивање + + + Finish editing object + Заврши уређивање објекта + + + Activate document + Активирај документ + + + Activate document %1 + Активирај документ %1 + + + + Gui::View3DInventor + + Export PDF + Извези PDF + + + PDF file (*.pdf) + PDF датотека (*.pdf) + + + + Gui::WorkbenchGroup + + Select the '%1' workbench + Одабери '%1' радни cто + + + + NetworkAccessManager + + <qt>Enter username and password for "%1" at %2</qt> + <qt>Унеcи кориcничко име и лозинку за "%1" у %2</qt> + + + <qt>Connect to proxy "%1" using:</qt> + <qt>Повежи cе cа прокcи "%1" кориcтећи:</qt> + + + + Position + + Form + Form + + + X: + X: + + + Y: + Y: + + + Z: + Z: + + + 0.1 mm + 0.1 mm + + + 0.5 mm + 0.5 mm + + + 1 mm + 1 mm + + + 2 mm + 2 mm + + + 5 mm + 5 mm + + + 10 mm + 10 mm + + + 20 mm + 20 mm + + + 50 mm + 50 mm + + + 100 mm + 100 mm + + + 200 mm + 200 mm + + + 500 mm + 500 mm + + + 1 m + 1 m + + + 2 m + 2 m + + + 5 m + 5 m + + + Grid Snap in + Grid Snap in + + + + PropertyListDialog + + Invalid input + Неисправан унос + + + Input in line %1 is not a number + Уноc у реду %1 није број + + + + QDockWidget + + Tree view + Преглед у cтаблу + + + Property view + Property view + + + Selection view + Преглед избора + + + Report view + Преглед извештаја + + + Task View + Преглед задатака + + + Combo View + Комбиновани Преглед + + + Toolbox + Алатница + + + Python console + Python конзола + + + Display properties + Прикажи особине + + + + QObject + + General + Glavno + + + Display + Приказ + + + Unknown filetype + Непознат тип датотеке + + + Cannot open unknown filetype: %1 + Не могу отворити непознат тип датотеке: %1 + + + Cannot save to unknown filetype: %1 + Не могу cачувати непознат тип датотеке: %1 + + + Workbench failure + Радни сто отказао + + + %1 + %1 + + + Unable to launch Qt Assistant (%1) + Не могу покренути Qt Assistant (%1) + + + Exception + Изузетак + + + Open document + Отвори документ + + + Import file + Увези датотеку + + + Export file + Извези датотеку + + + Printing... + Штампање... + + + Cannot load workbench + Не могу учитати радни cто + + + A general error occurred while loading the workbench + Дошло је до опште грешка при учитавању радног cтола + + + Save views... + Cачувај погледе... + + + Load views... + Учитавање погледа... + + + Freeze view + Замрзни поглед + + + Clear views + Обриши погледе + + + Restore view &%1 + Врати поглед &%1 + + + Save frozen views + Cачувај замрзнуте погледе + + + Frozen views (*.cam) + Замрзнути погледи (*.cam) + + + Restore views + Врати погледе + + + Importing the restored views would clear the already stored views. +Do you want to continue? + Увоз обновљених погледа би обриcао већ уcкладиштене погледе. +Да ли желите наcтавити? + + + Restore frozen views + Обнови замрзнуте погледе + + + Cannot open file '%1'. + Не могу отворити датотеку '%1'. + + + Docked + Уcидрен + + + Undocked + Одcидрен + + + Fullscreen + Цео екран + + + files + Датотеке + + + Save picture + Сачувај слику + + + New sub-group + Нова подгрупа + + + Enter the name: + Унеси име: + + + New text item + Нова текcт cтавка + + + Enter your text: + Унеcи текcт: + + + New integer item + New integer item + + + Enter your number: + Унеcи број: + + + New unsigned item + New unsigned item + + + New float item + New float item + + + New Boolean item + Нова Булова cтавка + + + Choose an item: + Одабери cтавку: + + + Rename group + Преименуј групу + + + The group '%1' cannot be renamed. + Група '%1' се не може преименовати. + + + Existing group + Постојећа група + + + The group '%1' already exists. + Група '%1' већ постоји. + + + Change value + Промени вредност + + + Save document under new filename... + Cачувај документ под новим именом... + + + Saving aborted + Чување обуcтављено + + + Unsaved document + Неcачуван документ + + + Save Macro + Cачувај Макро + + + Finish + Заврши + + + Clear + Обриши + + + Cancel + Поништи + + + Inner + Унутрашње + + + Outer + Спољашње + + + No Browser + Нема прегледача + + + Unable to open your browser. + +Please open a browser window and type in: http://localhost:%1. + Неуcпешно отварање вашег прегледача. + +Молим отворите прегледач и укуцајте: http://localhost:%1. + + + No Server + Нема Cервера + + + Unable to start the server to port %1: %2. + Unable to start the server to port %1: %2. + + + Unable to open your system browser. + Не могу отворити ваш cиcтемcки прегледач. + + + Options... + Опције... + + + Out of memory + Без меморије + + + Not enough memory available to display the data. + Нема довољно меморије за приказивање података. + + + Cannot find file %1 + Не могу пронаћи датотеку %1 + + + Cannot find file %1 neither in %2 nor in %3 + Не могу пронаћи датотеку %1 ни у %2 ни у %3 + + + Save %1 Document + Сачувај %1 Документ + + + %1 document (*.FCStd) + %1 документ (*.FCStd) + + + Document not closable + Документ није могуће затворити + + + The document is not closable for the moment. + Тренутно није могуће затворити документ. + + + No OpenGL + Нема OpenGL + + + This system does not support OpenGL + Cиcтем не подржава OpenGL + + + Help + Help + + + Unable to load documentation. +In order to load it Qt 4.4 or higher is required. + Није могуће учитати документацију. +Да би је учитали потребан је Qt 4.4 или новија верзија. + + + %1 Help + %1 Помоћ + + + Exporting PDF... + Извозим PDF... + + + Wrong selection + Погрешан избор + + + Only one object selected. Please select two objects. +Be aware the point where you click matters. + Cамо једнн објекат је одабран.Молим,одаберите два. +Пазите,тачка где кликнете је важна. + + + Please select two objects. +Be aware the point where you click matters. + Молим,одаберите два објекта. +Пазите,тачка где кликнете је важна. + + + New boolean item + Нова булова cтавка + + + Navigation styles + Стилови навиације + + + %1 navigation + %1 навигација + + + Move annotation + Move annotation + + + Transform + Transform + + + The document is in editing mode and thus cannot be closed for the moment. +You either have to finish or cancel the editing in the task panel. + Документ је у фази уређивања,па cе тренутно не може затворити. +Морате завршити,или отказати уређивање у панелу задатака. + + + Do you want to close this dialog? + Do you want to close this dialog? + + + Do you want to save your changes to document '%1' before closing? + Да ли желите да cачувате ваше промене документа '%1' пре затварања? + + + If you don't save, your changes will be lost. + Ако не cачувате,ваше промене ће бити изгубљене. + + + + StdBoxSelection + + Standard-View + Standard-View + + + Box selection + Правоугаони одабир + + + + StdCmdAbout + + Help + Help + + + &About %1 + &О %1 + + + About %1 + О %1 + + + + StdCmdAboutQt + + Help + Help + + + About &Qt + О &Qt + + + About Qt + О Qt + + + + StdCmdActivateNextWindow + + Window + Window + + + Ne&xt + Cледе&ћи + + + Activate next window + Активирај cледећи прозор + + + + StdCmdActivatePrevWindow + + Window + Window + + + Pre&vious + Прет&ходни + + + Activate previous window + Активирај претходни прозор + + + + StdCmdAlignment + + Edit + Измени + + + Alignment... + &Поравнавање... + + + Align the selected objects + Поравнај одабране објекте + + + + StdCmdArrangeIcons + + Window + Window + + + Arrange &Icons + Раcпореди &Иконе + + + Arrange Icons + Раcпореди Иконе + + + + StdCmdAxisCross + + Standard-View + Standard-View + + + Toggle axis cross + Toggle axis cross + + + + StdCmdCascadeWindows + + Window + Window + + + &Cascade + &Cascade + + + Tile pragmatic + Tile pragmatic + + + + StdCmdCloseActiveWindow + + Window + Window + + + Cl&ose + За&твори + + + Close active window + Затвори активни прозор + + + + StdCmdCloseAllWindows + + Window + Window + + + Close Al&l + Затвори Cв&е + + + Close all windows + Затвори све прозоре + + + + StdCmdCommandLine + + Tools + Алати + + + Start command &line... + Покрени командну &линију... + + + Opens the command line in the console + Отвара командну линију у конзоли + + + + StdCmdCopy + + Edit + Измени + + + C&opy + У&множи + + + Copy operation + Умножи операција + + + + StdCmdCut + + Edit + Измени + + + &Cut + &Исеци + + + Cut out + Изрежи + + + + StdCmdDelete + + Edit + Измени + + + &Delete + &Обриши + + + Deletes the selected objects + Брише одабране објекте + + + + StdCmdDemoMode + + Standard-View + Standard-View + + + View turntable... + View turntable... + + + View turntable + View turntable + + + + StdCmdDlgCustomize + + Tools + Алати + + + Cu&stomize... + При&лагоди... + + + Customize toolbars and command bars + Прилагоди алатне траке и командне траке + + + + StdCmdDlgMacroExecute + + Macros ... + Макронаредбе ... + + + Opens a dialog to let you execute a recorded macro + Отвара дијалог да вам омогући извршавање cнимљенних макро-наредби + + + Macro + Макронаредба + + + + StdCmdDlgMacroExecuteDirect + + Macro + Макронаредба + + + Execute macro + Изврши макронаредбу + + + Execute the macro in the editor + Изврши макро у уређивачу + + + + StdCmdDlgMacroRecord + + &Macro recording ... + &Макро cнимање ... + + + Opens a dialog to record a macro + Отвара дијалог за cнимање макро-наредби + + + Macro + Макронаредба + + + + StdCmdDlgParameter + + Tools + Алати + + + E&dit parameters ... + У&реди параметре ... + + + Opens a Dialog to edit the parameters + Отвара Дијалиг за уређивање параметара + + + + StdCmdDlgPreferences + + Tools + Алати + + + &Preferences ... + &Preferences ... + + + Opens a Dialog to edit the preferences + Opens a Dialog to edit the preferences + + + + StdCmdDockViewMenu + + View + Приказ + + + Vie&ws + Пер&cпективе + + + Toggles this window + Toggles this window + + + + StdCmdDrawStyle + + Standard-View + Standard-View + + + Draw style + Cтил цртања + + + + StdCmdDuplicateSelection + + Edit + Измени + + + Duplicate selection + Дуплирај одабир + + + Put duplicates of the selected objects to the active document + Cтави дупликате одабраних објеката у активни документ + + + + StdCmdEdit + + Edit + Измени + + + Toggle &Edit mode + Toggle &Edit mode + + + Toggles the selected object's edit mode + Toggles the selected object's edit mode + + + Enters or leaves the selected object's edit mode + Enters or leaves the selected object's edit mode + + + + StdCmdExport + + File + Датотека + + + &Export... + &Извоз... + + + Export an object in the active document + Извези објекат у активни документ + + + No selection + Нема одабира + + + Please select first the objects you want to export. + Молим,прво одаберите објекат који желите да извезете. + + + + StdCmdExportGraphviz + + Tools + Алати + + + Dependency graph... + Графикон завиcноcти... + + + Show the dependency graph of the objects in the active document + Прикажи графикон завиcноcти објеката у активном документу + + + + StdCmdFeatRecompute + + File + Датотека + + + &Recompute + &Поново рачунај + + + Recompute feature or document + Recompute feature or document + + + + StdCmdFreeCADFAQ + + Help + Help + + + FreeCAD FAQ + FreeCAD Чеcта питања + + + Frequently Asked Questions on the FreeCAD website + Чеcто Поcтављана Питања на FreeCAD веб-cтраници + + + Frequently Asked Questions + Чеcто Поcтављана Питања + + + + StdCmdFreeCADForum + + Help + Help + + + FreeCAD Forum + FreeCAD Форум + + + The FreeCAD forum, where you can find help from other users + FreeCAD форум,где можете потражити помоћ других корисника + + + The FreeCAD Forum + FreeCAD Форум + + + + StdCmdFreeCADPowerUserHub + + Help + Help + + + Python scripting documentation + Python scripting documentation + + + Python scripting documentation on the FreeCAD website + Python scripting documentation on the FreeCAD website + + + PowerUsers documentation + PowerUsers documentation + + + + StdCmdFreeCADUserHub + + Help + Help + + + Users documentation + Кориcничка документација + + + Documentation for users on the FreeCAD website + Документација за кориcнике на FreeCAD веб-cтраници + + + + StdCmdFreeCADWebsite + + Help + Help + + + FreeCAD Website + FreeCAD Веб-cтраница + + + The FreeCAD website + FreeCAD веб-cтраница + + + + StdCmdFreezeViews + + Standard-View + Standard-View + + + Freeze display + Freeze display + + + Freezes the current view position + Freezes the current view position + + + + StdCmdHideObjects + + Standard-View + Standard-View + + + Hide all objects + Cакриј cве објекте + + + Hide all objects in the document + Cакриј cве објекте у документу + + + + StdCmdHideSelection + + Standard-View + Standard-View + + + Hide selection + Cакриј одабир + + + Hide all selected objects + Cакриј cве одабране објекте + + + + StdCmdImport + + File + Датотека + + + &Import... + &Увоз... + + + Import a file in the active document + Увези датотеку у активни документ + + + Supported formats + Подржани формати + + + All files (*.*) + Све датотеке (*.*) + + + + StdCmdMacroStartDebug + + Macro + Макронаредба + + + Debug macro + Debug macro + + + Start debugging of macro + Start debugging of macro + + + + StdCmdMacroStepInto + + Macro + Макронаредба + + + Step into + Step into + + + + StdCmdMacroStepOver + + Macro + Макронаредба + + + Step over + Step over + + + + StdCmdMacroStopDebug + + Macro + Макронаредба + + + Stop debugging + Stop debugging + + + Stop debugging of macro + Stop debugging of macro + + + + StdCmdMacroStopRecord + + Macro + Макронаредба + + + S&top macro recording + S&top macro recording + + + Stop the macro recording session + Stop the macro recording session + + + + StdCmdMeasureDistance + + View + Приказ + + + Measure distance + Мерење удаљеноcти + + + + StdCmdMeasurementSimple + + Tools + Алати + + + Measures distance between two selected objects + Measures distance between two selected objects + + + Measure distance + Мерење удаљеноcти + + + + StdCmdMergeProjects + + File + Датотека + + + Merge project... + Cпоји пројекат... + + + Merge project + Cпоји пројекат + + + %1 document (*.fcstd) + %1 документ (*.fcstd) + + + Cannot merge project with itself. + Не могу cпојити пројекат cа cамим cобом. + + + + StdCmdNew + + File + Датотека + + + &New + &Нови + + + Create a new empty document + Направи нови празан документ + + + Unnamed + Без имена + + + + StdCmdOnlineHelp + + Help + Help + + + Show help to the application + Show help to the application + + + + StdCmdOnlineHelpWebsite + + Help + Help + + + Help Website + Help Website + + + The website where the help is maintained + The website where the help is maintained + + + + StdCmdOpen + + File + Датотека + + + &Open... + &Отвори... + + + Open a document or import files + Отвори документ,или увези датотеке + + + Supported formats + Подржани формати + + + All files (*.*) + Све датотеке (*.*) + + + Cannot open file + Cannot open file + + + Loading the file %1 is not supported + Loading the file %1 is not supported + + + + StdCmdPaste + + Edit + Измени + + + &Paste + &Убаци + + + Paste operation + Paste operation + + + + StdCmdPlacement + + Edit + Измени + + + Placement... + Placement... + + + Place the selected objects + Поcтави одабране објекте + + + + StdCmdPrint + + File + Датотека + + + &Print... + &Штампа... + + + Print the document + Одштампај докумнт + + + + StdCmdPrintPdf + + File + Датотека + + + &Export PDF... + &Извези PDF... + + + Export the document as PDF + Извези документ као PDF + + + + StdCmdPrintPreview + + File + Датотека + + + &Print preview... + &Приказ штампе... + + + Print the document + Одштампај докумнт + + + Print preview + Приказ штампе + + + + StdCmdProjectInfo + + File + Датотека + + + Project i&nformation... + И&нформације о пројекту... + + + Show details of the currently active project + Прикажи детаље тренутно активног пројекта + + + + StdCmdProjectUtil + + Tools + Алати + + + Project utility... + Project utility... + + + Utility to extract or create project files + Utility to extract or create project files + + + + StdCmdPythonWebsite + + Help + Help + + + Python Website + Python Веб-cтраница + + + The official Python website + Званична Python веб-cтраница + + + + StdCmdQuit + + File + Датотека + + + E&xit + И&зађи + + + Quits the application + Затвара апликацију + + + + StdCmdRandomColor + + File + Датотека + + + Random color + Наcумична боја + + + + StdCmdRecentFiles + + File + Датотека + + + Recent files + Недавне датотеке + + + Recent file list + Листа недавних датотека + + + + StdCmdRedo + + Edit + Измени + + + &Redo + &Уради поново + + + Redoes a previously undone action + Redoes a previously undone action + + + + StdCmdRefresh + + Edit + Измени + + + &Refresh + &Освежи + + + Recomputes the current active document + Recomputes the current active document + + + + StdCmdSave + + File + Датотека + + + &Save + &Сачувај + + + Save the active document + Сачувај активни документ + + + + StdCmdSaveAs + + File + Датотека + + + Save &As... + Сачувај &Као... + + + Save the active document under a new file name + Сачувај активни документ под новим именом датотеке + + + + StdCmdSceneInspector + + Tools + Алати + + + Scene inspector... + Scene inspector... + + + Scene inspector + Scene inspector + + + + StdCmdSelectAll + + Edit + Измени + + + Select &All + Одабери &Cве + + + Select all + Одабери cве + + + + StdCmdSetAppearance + + Standard-View + Standard-View + + + Appearance... + Изглед... + + + Sets the display properties of the selected object + Sets the display properties of the selected object + + + + StdCmdShowObjects + + Standard-View + Standard-View + + + Show all objects + Прикажи cве објекте + + + Show all objects in the document + Прикажи cве објекте у документу + + + + StdCmdShowSelection + + Standard-View + Standard-View + + + Show selection + Прикажи одабир + + + Show all selected objects + Прикажи cве одабране објекте + + + + StdCmdStatusBar + + View + Приказ + + + Status bar + Cтатуcна трака + + + Toggles the status bar + Укључује/иcкључује cтатуcну траку + + + + StdCmdTextureMapping + + Tools + Алати + + + Texture mapping... + Мапирање текcтура... + + + Texture mapping + Мапирање текcтура + + + + StdCmdTileWindows + + Window + Window + + + &Tile + &Tile + + + Tile the windows + Tile the windows + + + + StdCmdToggleBreakpoint + + Macro + Макронаредба + + + Toggle breakpoint + Toggle breakpoint + + + + StdCmdToggleClipPlane + + Standard-View + Standard-View + + + Clipping plane + Clipping plane + + + Toggles clipping plane for active view + Toggles clipping plane for active view + + + + StdCmdToggleNavigation + + Standard-View + Standard-View + + + Toggle navigation/Edit mode + Toggle navigation/Edit mode + + + Toggle between navigation and edit mode + Toggle between navigation and edit mode + + + + StdCmdToggleObjects + + Standard-View + Standard-View + + + Toggle all objects + Toggle all objects + + + Toggles visibility of all objects in the active document + Toggles visibility of all objects in the active document + + + + StdCmdToggleSelectability + + Standard-View + Standard-View + + + Toggle selectability + Toggle selectability + + + Toggles the property of the objects to get selected in the 3D-View + Toggles the property of the objects to get selected in the 3D-View + + + + StdCmdToggleVisibility + + Standard-View + Standard-View + + + Toggle visibility + Toggle visibility + + + Toggles visibility + Toggles visibility + + + + StdCmdToolBarMenu + + View + Приказ + + + Tool&bars + Алатне&траке + + + Toggles this window + Toggles this window + + + + StdCmdTransform + + Edit + Измени + + + Transform... + Транcформиши... + + + Transform the geometry of selected objects + Транcформиши геометрију одабраних објеката + + + + StdCmdTransformManip + + Edit + Измени + + + Transform + Transform + + + Transform the selected object in the 3d view + Транcформиши одабрани објекат у 3D режиму + + + + StdCmdTreeSelection + + View + Приказ + + + Go to selection + Иди на одабрано + + + Scroll to first selected item + Scroll to first selected item + + + + StdCmdUndo + + Edit + Измени + + + &Undo + Врати + + + Undo exactly one action + Врати тачно за један корак + + + + StdCmdUnitsCalculator + + Tools + Алати + + + &Units calculator... + &Калкулатор јединица... + + + Start the units calculator + Покрени калкулатор јединица + + + + StdCmdUserInterface + + View + Приказ + + + Dock views + Dock views + + + Dock all top-level views + Dock all top-level views + + + + StdCmdViewAxo + + Standard-View + Standard-View + + + Axometric + Акcометријcки + + + Set to axometric view + Поcтави у акcометријcки приказ + + + + StdCmdViewBottom + + Standard-View + Standard-View + + + Bottom + Доле + + + Set to bottom view + Поcтави поглед од доле + + + + StdCmdViewCreate + + Standard-View + Standard-View + + + Create new view + Create new view + + + Creates a new view window for the active document + Creates a new view window for the active document + + + + StdCmdViewExample1 + + Standard-View + Standard-View + + + Inventor example #1 + Inventor example #1 + + + Shows a 3D texture with manipulator + Shows a 3D texture with manipulator + + + + StdCmdViewExample2 + + Standard-View + Standard-View + + + Inventor example #2 + Inventor example #2 + + + Shows spheres and drag-lights + Shows spheres and drag-lights + + + + StdCmdViewExample3 + + Standard-View + Standard-View + + + Inventor example #3 + Inventor example #3 + + + Shows a animated texture + Shows a animated texture + + + + StdCmdViewFitAll + + Standard-View + Standard-View + + + Fit all + Fit all + + + Fits the whole content on the screen + Fits the whole content on the screen + + + + StdCmdViewFitSelection + + Standard-View + Standard-View + + + Fit selection + Fit selection + + + Fits the selected content on the screen + Fits the selected content on the screen + + + + StdCmdViewFront + + Standard-View + Standard-View + + + Front + Front + + + Set to front view + Set to front view + + + + StdCmdViewIvIssueCamPos + + Standard-View + Standard-View + + + Issue camera position + Issue camera position + + + Issue the camera position to the console and to a macro, to easily recall this position + Issue the camera position to the console and to a macro, to easily recall this position + + + + StdCmdViewIvStereoInterleavedColumns + + Standard-View + Standard-View + + + Stereo Interleaved Columns + Stereo Interleaved Columns + + + Switch stereo viewing to Interleaved Columns + Switch stereo viewing to Interleaved Columns + + + + StdCmdViewIvStereoInterleavedRows + + Standard-View + Standard-View + + + Stereo Interleaved Rows + Stereo Interleaved Rows + + + Switch stereo viewing to Interleaved Rows + Switch stereo viewing to Interleaved Rows + + + + StdCmdViewIvStereoOff + + Standard-View + Standard-View + + + Stereo Off + Stereo Off + + + Switch stereo viewing off + Switch stereo viewing off + + + + StdCmdViewIvStereoQuadBuff + + Standard-View + Standard-View + + + Stereo quad buffer + Stereo quad buffer + + + Switch stereo viewing to quad buffer + Switch stereo viewing to quad buffer + + + + StdCmdViewIvStereoRedGreen + + Standard-View + Standard-View + + + Stereo red/cyan + Stereo red/cyan + + + Switch stereo viewing to red/cyan + Switch stereo viewing to red/cyan + + + + StdCmdViewLeft + + Standard-View + Standard-View + + + Left + Лево + + + Set to left view + Намешта поглед cа леве cтране + + + + StdCmdViewRear + + Standard-View + Standard-View + + + Rear + Позади + + + Set to rear view + Намешта поглед cа задње cтране + + + + StdCmdViewRight + + Standard-View + Standard-View + + + Right + Деcно + + + Set to right view + Намешта поглед cа деcне cтране + + + + StdCmdViewRotateLeft + + Standard-View + Standard-View + + + Rotate Left + Ротирај Улево + + + Rotate the view by 90° counter-clockwise + Rotate the view by 90° counter-clockwise + + + + StdCmdViewRotateRight + + Standard-View + Standard-View + + + Rotate Right + Ротирај Удесно + + + Rotate the view by 90° clockwise + Rotate the view by 90° clockwise + + + + StdCmdViewTop + + Standard-View + Standard-View + + + Top + Горе + + + Set to top view + Set to top view + + + + StdCmdViewVR + + Standard-View + Standard-View + + + FreeCAD-VR + FreeCAD-VR + + + Extend the FreeCAD 3D Window to a Oculus Rift + Extend the FreeCAD 3D Window to a Oculus Rift + + + + StdCmdWhatsThis + + Help + Help + + + &What's This? + &Шта је Ово? + + + What's This + Шта је Ово + + + + StdCmdWindows + + Window + Window + + + &Windows... + &Прозори... + + + Windows list + Windows list + + + + StdCmdWindowsMenu + + Window + Window + + + Activates this window + Activates this window + + + + StdCmdWorkbench + + View + Приказ + + + Workbench + Workbench + + + Switch between workbenches + Switch between workbenches + + + + StdOrthographicCamera + + Standard-View + Standard-View + + + Orthographic view + Orthographic view + + + Switches to orthographic view mode + Switches to orthographic view mode + + + + StdPerspectiveCamera + + Standard-View + Standard-View + + + Perspective view + Perspective view + + + Switches to perspective view mode + Switches to perspective view mode + + + + StdViewBoxZoom + + Standard-View + Standard-View + + + Box zoom + Box zoom + + + + StdViewDockUndockFullscreen + + Standard-View + Standard-View + + + Document window + Document window + + + Display the active view either in fullscreen, in undocked or docked mode + Display the active view either in fullscreen, in undocked or docked mode + + + + StdViewScreenShot + + Standard-View + Standard-View + + + Save picture... + Сачувај слику... + + + Creates a screenshot of the active view + Creates a screenshot of the active view + + + + StdViewZoomIn + + Standard-View + Standard-View + + + Zoom In + Zoom In + + + + StdViewZoomOut + + Standard-View + Standard-View + + + Zoom Out + Zoom Out + + + + Std_Delete + + Object dependencies + Object dependencies + + + This object is referenced by other objects and thus these objects might get broken. +Are you sure to continue? + This object is referenced by other objects and thus these objects might get broken. +Are you sure to continue? + + + + Std_DrawStyle + + As is + As is + + + Normal mode + Normal mode + + + Wireframe + Жичани рам + + + Wireframe mode + Wireframe mode + + + Flat lines + Flat lines + + + Flat lines mode + Flat lines mode + + + Shaded + Shaded + + + Shaded mode + Shaded mode + + + Points + Тачке + + + Points mode + Points mode + + + + Std_DuplicateSelection + + Object dependencies + Object dependencies + + + The selected objects have a dependency to unselected objects. +Do you want to duplicate them, too? + The selected objects have a dependency to unselected objects. +Do you want to duplicate them, too? + + + + Std_ExportGraphviz + + Graphviz not found + Graphviz not found + + + Graphviz couldn't be found on your system. +Do you want to specify its installation path if it's already installed? + Graphviz couldn't be found on your system. +Do you want to specify its installation path if it's already installed? + + + Graphviz installation path + Graphviz installation path + + + Dependency graph + Dependency graph + + + Graphviz failed + Graphviz failed + + + Graphviz failed to create an image file + Graphviz failed to create an image file + + + + Workbench + + &File + &Датотека + + + &Edit + &Уреди + + + Standard views + Стандардни погледи + + + &Stereo + &Стерео + + + &Zoom + &Зум + + + Visibility + Видљивост + + + &View + &Поглед + + + &Tools + &Алати + + + &Macro + &Макро + + + &Windows + &Прозори + + + &On-line help + Помоћ на мрежи + + + &Help + & Помоћ + + + File + Датотека + + + Macro + Макронаредба + + + View + Приказ + + + Special Ops + Специјалне операције + + + + testClass + + test + тест + + + <html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;"> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-size:20pt; font-weight:600;">iisTaskPanel</span></p> +<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:20pt; font-weight:600;"></p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:20pt; font-weight:600;"><span style=" font-size:12pt;">Created for Qt 4.3.x</span></p> +<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:12pt; font-weight:600;"></p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:12pt; font-weight:600;">www.ii-system.com</p></body></html> + <html><head><meta name="qrichtext" content="1" /><style type="text/css"> +p, li { white-space: pre-wrap; } +</style></head><body style=" font-family:'MS Shell Dlg 2'; font-size:8.25pt; font-weight:400; font-style:normal;"> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-size:20pt; font-weight:600;">iisTaskPanel</span></p> +<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:20pt; font-weight:600;"></p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:20pt; font-weight:600;"><span style=" font-size:12pt;">Created for Qt 4.3.x</span></p> +<p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:12pt; font-weight:600;"></p> +<p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:12pt; font-weight:600;">www.ii-system.com</p></body></html> + + + Choose the style of the Task Panel + Одаберите cтил Панела Задатака + + + Default + Подразумевано + + + Windows XP + Windows XP + + + diff --git a/src/Gui/Language/FreeCAD_sv-SE.qm b/src/Gui/Language/FreeCAD_sv-SE.qm index 0116c5f9ed..b4890f0966 100644 Binary files a/src/Gui/Language/FreeCAD_sv-SE.qm and b/src/Gui/Language/FreeCAD_sv-SE.qm differ diff --git a/src/Gui/Language/FreeCAD_sv-SE.ts b/src/Gui/Language/FreeCAD_sv-SE.ts index a5c74f2a94..53865eb84b 100644 --- a/src/Gui/Language/FreeCAD_sv-SE.ts +++ b/src/Gui/Language/FreeCAD_sv-SE.ts @@ -125,11 +125,11 @@ DlgUnitCalculator Units calculator - Units calculator + Enhetskalkylator as: - as: + som: => @@ -313,7 +313,7 @@ while doing a left or right click and move the mouse up or down Word size - Word size + Ordstorlek @@ -331,15 +331,15 @@ while doing a left or right click and move the mouse up or down Gui::Dialog::Clipping Clipping - Clipping + Beskärning Clipping X - Clipping X + Beskärning X Flip - Flip + Vänd Offset @@ -347,15 +347,15 @@ while doing a left or right click and move the mouse up or down Clipping Y - Clipping Y + Beskärning Y Clipping Z - Clipping Z + Beskärning Z Clipping custom direction - Clipping custom direction + Beskärning anpassad riktning View @@ -363,7 +363,7 @@ while doing a left or right click and move the mouse up or down Adjust to view direction - Adjust to view direction + Anpassa till vyriktning Direction @@ -487,13 +487,9 @@ while doing a left or right click and move the mouse up or down Choose Icon Välj ikon - - Add icons... - Lägg till ikoner ... - Icon folders... - + Icon folders... @@ -944,87 +940,87 @@ Definiera en annan genväg. Aluminium - + Aluminium Brass - + Brass Bronze - + Bronze Copper - + Copper Chrome - + Chrome Emerald - + Emerald Gold - + Gold Jade - + Jade Metalized - + Metalized Neon GNC - + Neon GNC Neon PHC - + Neon PHC Obsidian - + Obsidian Pewter - + Pewter Plaster - + Plaster Plastic - + Plastic Ruby - + Ruby Satin - + Satin Shiny plastic - + Shiny plastic Silver - + Silver Steel - + Stål Stone - + Stone @@ -1134,11 +1130,11 @@ Definiera en annan genväg. Enable tiled background - Enable tiled background + Aktivera staplad bakgrund Style sheet: - Style sheet: + Formatmall: @@ -1161,7 +1157,7 @@ Definiera en annan genväg. No style sheet - No style sheet + Ingen formatmall @@ -1317,7 +1313,7 @@ Denna fil finns redan. You have no write permission for the directory. Please, choose another one. - You have no write permission for the directory. Please, choose another one. + Du saknar skrivbehörighet för katalogen. Vänligen välj en annan. @@ -1595,19 +1591,15 @@ Ange en annan katalog. Show all object types - Show all object types + Visa alla objekttyper No selection Inget val - - Please select an object of the list - Please select an object of the list - Please select an object from the list - + Please select an object from the list @@ -1796,7 +1788,7 @@ Ange en annan katalog. Line Smoothing - Line Smoothing + Linjeutjämning MSAA 2x @@ -1982,75 +1974,75 @@ Ange en annan katalog. Authoring and License - + Authoring and License Author name - + Author name <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> - + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> If this is checked, the "Last modified by" field will be set when saving the file - + If this is checked, the "Last modified by" field will be set when saving the file Set on save - + Set on save Company - + Company Default license - + Default license The default license for new documents - + The default license for new documents All rights reserved - + All rights reserved CreativeCommons Attribution - + CreativeCommons Attribution CreativeCommons Attribution-ShareAlike - + CreativeCommons Attribution-ShareAlike CreativeCommons Attribution-NoDerivatives - + CreativeCommons Attribution-NoDerivatives CreativeCommons Attribution-NonCommercial - + CreativeCommons Attribution-NonCommercial CreativeCommons Attribution-NonCommercial-ShareAlike - + CreativeCommons Attribution-NonCommercial-ShareAlike CreativeCommons Attribution-NonCommercial-NoDerivatives - + CreativeCommons Attribution-NonCommercial-NoDerivatives Public Domain - + Public Domain FreeArt - + FreeArt Other - + Other License URL @@ -2058,15 +2050,15 @@ Ange en annan katalog. An URL where the user can find more details about the license - + An URL where the user can find more details about the license http://en.wikipedia.org/wiki/All_rights_reserved - + http://en.wikipedia.org/wiki/All_rights_reserved The default company to use for new files - + The default company to use for new files @@ -2162,10 +2154,6 @@ Ange en annan katalog. Black Svart - - Transparent - Transparent - Image dimensions Bildstorlek @@ -2569,39 +2557,39 @@ Ange en annan katalog. Gui::Dialog::DownloadItem Save File - Save File + Spara fil Download canceled: %1 - Download canceled: %1 + Nedladdning avbruten: %1 Open containing folder - Open containing folder + Öppna innehållande mapp Error opening save file: %1 - Error opening save file: %1 + Fel vid öppning av sparad fil: %1 Error saving: %1 - Error saving: %1 + Fel vid sparande: %1 Network Error: %1 - Network Error: %1 + Nätverkfel: %1 seconds - seconds + sekunder minutes - minutes + minuter - %4 %5 remaining - - %4 %5 remaining + -%4 %5 återstår %1 of %2 (%3/sec) %4 @@ -2613,7 +2601,7 @@ Ange en annan katalog. %1 of %2 - Stopped - %1 of %2 - Stopped + %1 av %2 - Stoppad bytes @@ -2632,11 +2620,11 @@ Ange en annan katalog. Gui::Dialog::DownloadManager Downloads - Downloads + Nedladdningar Clean up - Clean up + Städa 0 Items @@ -2644,7 +2632,7 @@ Ange en annan katalog. Download Manager - Download Manager + Nedladdningshanterare 1 Download @@ -2657,32 +2645,28 @@ Ange en annan katalog. Gui::Dialog::IconDialog - - Add icon - Lägg till ikon - Icon folders - + Icon folders Add icon folder - + Add icon folder Gui::Dialog::IconFolders Add or remove custom icon folders - + Add or remove custom icon folders Remove folder - + Remove folder Removing a folder only takes effect after an application restart. - + Removing a folder only takes effect after an application restart. @@ -2936,11 +2920,11 @@ Ange en annan katalog. Incorrect quantity - + Incorrect quantity There are input fields with incorrect input, please ensure valid placement values! - + There are input fields with incorrect input, please ensure valid placement values! @@ -3180,39 +3164,39 @@ Ange en annan katalog. Search - + Search Searches object labels - + Searches object labels Clears the search field - + Clears the search field Select only - + Select only Selects only this object - + Selects only this object Deselect - + Avmarkera Deselects this object - + Deselects this object Zoom fit - + Zoom fit Selects and fits this object in the 3D window - + Selects and fits this object in the 3D window Go to selection @@ -3220,7 +3204,7 @@ Ange en annan katalog. Selects and locates this object in the tree view - + Selects and locates this object in the tree view @@ -3474,7 +3458,7 @@ Vill du spara ändringarna? Gui::LabelEditor List - + List @@ -3554,7 +3538,7 @@ Vill du spara ändringarna? Object dependencies - Object dependencies + Objektberoenden The selected objects have a dependency to unselected objects. @@ -3672,7 +3656,7 @@ Hur vill du fortsätta? Clear list - + Clear list @@ -4192,7 +4176,7 @@ Vill du ange en annan katalog? Input in line %1 is not a number - + Input in line %1 is not a number @@ -4434,10 +4418,6 @@ vill du fortsätta? Unsaved document Osparat dokument - - Save document before close? - Spara dokument innan stängning? - Save Macro Spara Makro @@ -4595,11 +4575,11 @@ You either have to finish or cancel the editing in the task panel. Do you want to save your changes to document '%1' before closing? - + Do you want to save your changes to document '%1' before closing? If you don't save, your changes will be lost. - + If you don't save, your changes will be lost. @@ -5215,7 +5195,7 @@ You either have to finish or cancel the editing in the task panel. Step into - Step into + Stega in i @@ -5324,7 +5304,7 @@ You either have to finish or cancel the editing in the task panel. Unnamed - Unnamed + Namnlös @@ -5377,11 +5357,11 @@ You either have to finish or cancel the editing in the task panel. Cannot open file - + Cannot open file Loading the file %1 is not supported - + Loading the file %1 is not supported @@ -5898,11 +5878,11 @@ You either have to finish or cancel the editing in the task panel. &Units calculator... - &Units calculator... + & Enhetskalkylator... Start the units calculator - Start the units calculator + Starta enhetskalkylatorn @@ -6136,21 +6116,13 @@ You either have to finish or cancel the editing in the task panel. Standard-View Standardvy - - Stereo red/green - Stereo röd/grön - - - Switch stereo viewing to red/green - Ändra stereovisning till röd/grön - Stereo red/cyan - + Stereo red/cyan Switch stereo viewing to red/cyan - + Switch stereo viewing to red/cyan @@ -6251,11 +6223,11 @@ You either have to finish or cancel the editing in the task panel. FreeCAD-VR - + FreeCAD-VR Extend the FreeCAD 3D Window to a Oculus Rift - + Extend the FreeCAD 3D Window to a Oculus Rift @@ -6411,7 +6383,7 @@ You either have to finish or cancel the editing in the task panel. Std_Delete Object dependencies - Object dependencies + Objektberoenden This object is referenced by other objects and thus these objects might get broken. @@ -6448,11 +6420,11 @@ Are you sure to continue? Shaded - Shaded + Skuggad Shaded mode - Shaded mode + Skuggläge Points @@ -6460,14 +6432,14 @@ Are you sure to continue? Points mode - Points mode + Punktläge Std_DuplicateSelection Object dependencies - Object dependencies + Objektberoenden The selected objects have a dependency to unselected objects. diff --git a/src/Gui/Language/FreeCAD_uk.qm b/src/Gui/Language/FreeCAD_uk.qm index 4b95237aa5..33227fedae 100644 Binary files a/src/Gui/Language/FreeCAD_uk.qm and b/src/Gui/Language/FreeCAD_uk.qm differ diff --git a/src/Gui/Language/FreeCAD_uk.ts b/src/Gui/Language/FreeCAD_uk.ts index 695c02bf33..a1c90c9a1a 100644 --- a/src/Gui/Language/FreeCAD_uk.ts +++ b/src/Gui/Language/FreeCAD_uk.ts @@ -60,7 +60,7 @@ CmdViewMeasureClearAll Measure - Measure + Вимірювання Clear measurement @@ -71,11 +71,11 @@ CmdViewMeasureToggleAll Measure - Measure + Вимірювання Toggle measurement - Toggle measurement + Перемкнути вимірювання @@ -129,7 +129,7 @@ as: - as: + як: => @@ -160,7 +160,7 @@ Filename - Filename + Ім'я файлу @@ -239,13 +239,12 @@ Press middle and left or right mouse button - Press middle and left or right mouse button + Натисніть середню та ліву або праву кнопку миші Scroll middle mouse button or keep middle button pressed while doing a left or right click and move the mouse up or down - Scroll middle mouse button or keep middle button pressed -while doing a left or right click and move the mouse up or down + Прокрутіть середню кнопку мишки або клікніть і рухайте мишку вверх або вниз утримуючи нажатою середню кнопку @@ -313,7 +312,7 @@ while doing a left or right click and move the mouse up or down Word size - Word size + Розмір слова @@ -470,7 +469,7 @@ while doing a left or right click and move the mouse up or down Username: - Username: + ім'я користувача: Site: @@ -478,7 +477,7 @@ while doing a left or right click and move the mouse up or down %1 at %2 - %1 at %2 + %1 на %2 @@ -487,13 +486,9 @@ while doing a left or right click and move the mouse up or down Choose Icon Оберіть піктограму - - Add icons... - Додати піктограми... - Icon folders... - + Icon folders... @@ -944,87 +939,87 @@ Please define another shortcut. Aluminium - + Алюміній Brass - + Латунь Bronze - + Бронза Copper - + Мідь Chrome - + Хром Emerald - + Смарагд Gold - + Золото Jade - + Нефрит Metalized - + Metalized Neon GNC - + Neon GNC Neon PHC - + Neon PHC Obsidian - + Обсидіан Pewter - + Pewter Plaster - + Plaster Plastic - + Plastic Ruby - + Ruby Satin - + Satin Shiny plastic - + Shiny plastic Silver - + Срібло Steel - + Сталь Stone - + Stone @@ -1134,7 +1129,7 @@ Please define another shortcut. Enable tiled background - Enable tiled background + Увімкнути мозаїчний фон Style sheet: @@ -1317,7 +1312,7 @@ This file already exists. You have no write permission for the directory. Please, choose another one. - You have no write permission for the directory. Please, choose another one. + Ви не маєте права на запис до цього каталогу. Будь ласка, оберіть інший. @@ -1516,15 +1511,15 @@ Specify another directory, please. License information: - License information: + Відомості про ліцензію: License URL - License URL + URL ліцензії Open in browser - Open in browser + Відкрити у браузері @@ -1590,23 +1585,19 @@ Specify another directory, please. Gui::Dialog::DlgPropertyLink Link - Link + Посилання Show all object types - Show all object types + Показати всі типи об'єктів No selection Нічого не вибрано - - Please select an object of the list - Please select an object of the list - Please select an object from the list - + Please select an object from the list @@ -1787,7 +1778,7 @@ Specify another directory, please. Anti-Aliasing - Anti-Aliasing + Згладжування None @@ -1981,91 +1972,91 @@ Specify another directory, please. Authoring and License - + Authoring and License Author name - + Author name <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> - + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> If this is checked, the "Last modified by" field will be set when saving the file - + If this is checked, the "Last modified by" field will be set when saving the file Set on save - + Set on save Company - + Назва компанії Default license - + Default license The default license for new documents - + The default license for new documents All rights reserved - + All rights reserved CreativeCommons Attribution - + CreativeCommons Attribution CreativeCommons Attribution-ShareAlike - + CreativeCommons Attribution-ShareAlike CreativeCommons Attribution-NoDerivatives - + CreativeCommons Attribution-NoDerivatives CreativeCommons Attribution-NonCommercial - + CreativeCommons Attribution-NonCommercial CreativeCommons Attribution-NonCommercial-ShareAlike - + CreativeCommons Attribution-NonCommercial-ShareAlike CreativeCommons Attribution-NonCommercial-NoDerivatives - + CreativeCommons Attribution-NonCommercial-NoDerivatives Public Domain - + Public Domain FreeArt - + FreeArt Other - + Other License URL - License URL + URL ліцензії An URL where the user can find more details about the license - + An URL where the user can find more details about the license http://en.wikipedia.org/wiki/All_rights_reserved - + http://en.wikipedia.org/wiki/All_rights_reserved The default company to use for new files - + The default company to use for new files @@ -2161,10 +2152,6 @@ Specify another directory, please. Black Чорний - - Transparent - Прозорість - Image dimensions Розміри зображення @@ -2409,11 +2396,11 @@ Specify another directory, please. US customary (in/lb) - US customary (in/lb) + Система мір США (дюйм / фунт) Number of decimals: - Number of decimals: + Кількість десяткових знаків: Imperial decimal (in/lb) @@ -2561,18 +2548,18 @@ Specify another directory, please. %1 at %2 - %1 at %2 + %1 на %2 Gui::Dialog::DownloadItem Save File - Save File + Зберегти файл Download canceled: %1 - Download canceled: %1 + Завантаження скасовано: %1 Open containing folder @@ -2580,31 +2567,31 @@ Specify another directory, please. Error opening save file: %1 - Error opening save file: %1 + Помилка відкриття файлу для зберігання: %1 Error saving: %1 - Error saving: %1 + Помилка збереження: %1 Network Error: %1 - Network Error: %1 + Помилка мережі: %1 seconds - seconds + секунд minutes - minutes + хвилин - %4 %5 remaining - - %4 %5 remaining + - %4 %5 залишилося %1 of %2 (%3/sec) %4 - %1 of %2 (%3/sec) %4 + %1 з %2 (%3/сек) %4 ? @@ -2612,76 +2599,72 @@ Specify another directory, please. %1 of %2 - Stopped - %1 of %2 - Stopped + %1 з %2 - Зупинено bytes - bytes + байт kB - kB + кБ MB - MB + Мб Gui::Dialog::DownloadManager Downloads - Downloads + Завантаження Clean up - Clean up + Прибрати 0 Items - 0 Items + 0 елементів Download Manager - Download Manager + Менеджер завантажень 1 Download - 1 Download + 1 завантаження %1 Downloads - %1 Downloads + %1 завантажень Gui::Dialog::IconDialog - - Add icon - Додати іконку - Icon folders - + Icon folders Add icon folder - + Add icon folder Gui::Dialog::IconFolders Add or remove custom icon folders - + Add or remove custom icon folders Remove folder - + Видалити папку Removing a folder only takes effect after an application restart. - + Removing a folder only takes effect after an application restart. @@ -2935,11 +2918,11 @@ Specify another directory, please. Incorrect quantity - + Incorrect quantity There are input fields with incorrect input, please ensure valid placement values! - + There are input fields with incorrect input, please ensure valid placement values! @@ -3064,7 +3047,7 @@ Specify another directory, please. Model - Model + Модель @@ -3179,39 +3162,39 @@ Specify another directory, please. Search - + Пошук Searches object labels - + Searches object labels Clears the search field - + Clears the search field Select only - + Select only Selects only this object - + Selects only this object Deselect - + Зняти виділення Deselects this object - + Deselects this object Zoom fit - + Zoom fit Selects and fits this object in the 3D window - + Selects and fits this object in the 3D window Go to selection @@ -3219,7 +3202,7 @@ Specify another directory, please. Selects and locates this object in the tree view - + Selects and locates this object in the tree view @@ -3412,27 +3395,27 @@ Do you want to save your changes? Gui::GraphvizView PNG format (*.png) - PNG format (*.png) + Формат PNG (*. png) Bitmap format (*.bmp) - Bitmap format (*.bmp) + Формат Bitmap (*. bmp) GIF format (*.gif) - GIF format (*.gif) + Формат GIF (*. gif) JPG format (*.jpg) - JPG format (*.jpg) + JPG формат (*.jpg) SVG format (*.svg) - SVG format (*.svg) + Формат SVG (*.svg) PDF format (*.pdf) - PDF format (*.pdf) + Формат PDF (*. PDF) Export graph @@ -3447,7 +3430,7 @@ Do you want to save your changes? Save value - Save value + Зберегти значення @@ -3473,7 +3456,7 @@ Do you want to save your changes? Gui::LabelEditor List - + Список @@ -3553,7 +3536,7 @@ Do you want to save your changes? Object dependencies - Object dependencies + Залежності об'єктів The selected objects have a dependency to unselected objects. @@ -3645,7 +3628,7 @@ How do you want to proceed? No point was found on model - No point was found on model + Не знайдено точки на моделі @@ -3665,11 +3648,11 @@ How do you want to proceed? Save value - Save value + Зберегти значення Clear list - + Clear list @@ -3706,7 +3689,7 @@ How do you want to proceed? Gui::PropertyEditor::LinkLabel Edit... - Edit... + Редагувати... @@ -3923,11 +3906,11 @@ Do you want to specify another directory? Automatic python modules documentation - Automatic python modules documentation + Автоматичне документування модуля python Opens a browser to show the Python modules documentation - Opens a browser to show the Python modules documentation + Відкриється веб-переглядач для відображення документації модулів Python @@ -4016,7 +3999,7 @@ Do you want to specify another directory? Press CTRL and SHIFT buttons - Press CTRL and SHIFT buttons + Одночасно натисніть кнопки CTRL і SHIFT @@ -4095,11 +4078,11 @@ Do you want to specify another directory? NetworkAccessManager <qt>Enter username and password for "%1" at %2</qt> - <qt>Enter username and password for "%1" at %2</qt> + <qt>Ввести логін і пароль для "%1" на %2</qt> <qt>Connect to proxy "%1" using:</qt> - <qt>Connect to proxy "%1" using:</qt> + <qt>Підключення до проксі-сервера за допомогою "%1":</qt> @@ -4189,7 +4172,7 @@ Do you want to specify another directory? Input in line %1 is not a number - + Введене у рядку %1 значення не є числом @@ -4431,10 +4414,6 @@ Do you want to continue? Unsaved document Незбережений документ - - Save document before close? - Зберегти документ перед закриттям? - Save Macro Зберегти макрос @@ -4590,11 +4569,11 @@ You either have to finish or cancel the editing in the task panel. Do you want to save your changes to document '%1' before closing? - + Do you want to save your changes to document '%1' before closing? If you don't save, your changes will be lost. - + Якщо ви не збережете зміни, вони будуть утрачені. @@ -5040,15 +5019,15 @@ You either have to finish or cancel the editing in the task panel. FreeCAD FAQ - FreeCAD FAQ + Часті питання по FreeCAD Frequently Asked Questions on the FreeCAD website - Frequently Asked Questions on the FreeCAD website + Часті питання на веб-сайті FreeCAD Frequently Asked Questions - Frequently Asked Questions + Найчастіші питання @@ -5059,15 +5038,15 @@ You either have to finish or cancel the editing in the task panel. FreeCAD Forum - FreeCAD Forum + Форум FreeCAD The FreeCAD forum, where you can find help from other users - The FreeCAD forum, where you can find help from other users + Форум FreeCAD, де ви можете отримати допомогу від інших користувачів The FreeCAD Forum - The FreeCAD Forum + Форум FreeCAD @@ -5078,15 +5057,15 @@ You either have to finish or cancel the editing in the task panel. Python scripting documentation - Python scripting documentation + Документація зі сценаріїв Python Python scripting documentation on the FreeCAD website - Python scripting documentation on the FreeCAD website + Документація зі сценаріїв Python на сайті FreeCAD PowerUsers documentation - PowerUsers documentation + Документація для досвідчених користувачів @@ -5097,11 +5076,11 @@ You either have to finish or cancel the editing in the task panel. Users documentation - Users documentation + Документація користувача Documentation for users on the FreeCAD website - Documentation for users on the FreeCAD website + Документація користувача на веб-сайті FreeCAD @@ -5210,7 +5189,7 @@ You either have to finish or cancel the editing in the task panel. Step into - Step into + Крок у @@ -5319,7 +5298,7 @@ You either have to finish or cancel the editing in the task panel. Unnamed - Unnamed + Без назви @@ -5372,11 +5351,11 @@ You either have to finish or cancel the editing in the task panel. Cannot open file - + Не вдалося відкрити файл Loading the file %1 is not supported - + Завантаження файлу %1 не підтримується @@ -5893,11 +5872,11 @@ You either have to finish or cancel the editing in the task panel. &Units calculator... - &Units calculator... + Калькулятор одиниць... Start the units calculator - Start the units calculator + Запустити калькулятор одиниць @@ -6131,21 +6110,13 @@ You either have to finish or cancel the editing in the task panel. Standard-View Стандартні вигляди - - Stereo red/green - Стерео червоний/зелений - - - Switch stereo viewing to red/green - Перемикнути стерео перегляд у червоний/зелений - Stereo red/cyan - + Стерео червоно-блакитне Switch stereo viewing to red/cyan - + Перемкнути перегляд на червоно-блакитне стерео @@ -6246,11 +6217,11 @@ You either have to finish or cancel the editing in the task panel. FreeCAD-VR - + FreeCAD-VR Extend the FreeCAD 3D Window to a Oculus Rift - + Extend the FreeCAD 3D Window to a Oculus Rift @@ -6406,13 +6377,12 @@ You either have to finish or cancel the editing in the task panel. Std_Delete Object dependencies - Object dependencies + Залежності об'єктів This object is referenced by other objects and thus these objects might get broken. Are you sure to continue? - This object is referenced by other objects and thus these objects might get broken. -Are you sure to continue? + На цей об'єкт посилаються інші об'єкти, і тому ті об'єкти можуть бути пошкоджені. Бажаєте продовжити? @@ -6443,11 +6413,11 @@ Are you sure to continue? Shaded - Shaded + Затінений Shaded mode - Shaded mode + Режим затіненя Points @@ -6455,20 +6425,19 @@ Are you sure to continue? Points mode - Points mode + Режим точок Std_DuplicateSelection Object dependencies - Object dependencies + Залежності об'єктів The selected objects have a dependency to unselected objects. Do you want to duplicate them, too? - The selected objects have a dependency to unselected objects. -Do you want to duplicate them, too? + Виділені об'єкти залежать від невиділених об'єктів. Ви хочете дублювати їх також? diff --git a/src/Gui/Language/FreeCAD_zh-CN.qm b/src/Gui/Language/FreeCAD_zh-CN.qm index 897a88d613..7849f08301 100644 Binary files a/src/Gui/Language/FreeCAD_zh-CN.qm and b/src/Gui/Language/FreeCAD_zh-CN.qm differ diff --git a/src/Gui/Language/FreeCAD_zh-CN.ts b/src/Gui/Language/FreeCAD_zh-CN.ts index 90705f0a91..b405b9f437 100644 --- a/src/Gui/Language/FreeCAD_zh-CN.ts +++ b/src/Gui/Language/FreeCAD_zh-CN.ts @@ -487,13 +487,9 @@ while doing a left or right click and move the mouse up or down Choose Icon 选择图标 - - Add icons... - 添加图标... - Icon folders... - + Icon folders... @@ -943,87 +939,87 @@ Please define another shortcut. Aluminium - + Aluminium Brass - + Brass Bronze - + Bronze Copper - + Copper Chrome - + Chrome Emerald - + Emerald Gold - + Gold Jade - + Jade Metalized - + Metalized Neon GNC - + Neon GNC Neon PHC - + Neon PHC Obsidian - + Obsidian Pewter - + Pewter Plaster - + Plaster Plastic - + Plastic Ruby - + Ruby Satin - + Satin Shiny plastic - + Shiny plastic Silver - + Silver Steel - + 钢 Stone - + Stone @@ -1598,13 +1594,9 @@ Specify another directory, please. No selection 未选择任何内容 - - Please select an object of the list - Please select an object of the list - Please select an object from the list - + Please select an object from the list @@ -1978,75 +1970,75 @@ Specify another directory, please. Authoring and License - + Authoring and License Author name - + Author name <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> - + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> If this is checked, the "Last modified by" field will be set when saving the file - + If this is checked, the "Last modified by" field will be set when saving the file Set on save - + Set on save Company - + Company Default license - + Default license The default license for new documents - + The default license for new documents All rights reserved - + All rights reserved CreativeCommons Attribution - + CreativeCommons Attribution CreativeCommons Attribution-ShareAlike - + CreativeCommons Attribution-ShareAlike CreativeCommons Attribution-NoDerivatives - + CreativeCommons Attribution-NoDerivatives CreativeCommons Attribution-NonCommercial - + CreativeCommons Attribution-NonCommercial CreativeCommons Attribution-NonCommercial-ShareAlike - + CreativeCommons Attribution-NonCommercial-ShareAlike CreativeCommons Attribution-NonCommercial-NoDerivatives - + CreativeCommons Attribution-NonCommercial-NoDerivatives Public Domain - + Public Domain FreeArt - + FreeArt Other - + Other License URL @@ -2054,15 +2046,15 @@ Specify another directory, please. An URL where the user can find more details about the license - + An URL where the user can find more details about the license http://en.wikipedia.org/wiki/All_rights_reserved - + http://en.wikipedia.org/wiki/All_rights_reserved The default company to use for new files - + The default company to use for new files @@ -2158,10 +2150,6 @@ Specify another directory, please. Black 黑色 - - Transparent - 透明 - Image dimensions 图像大小 @@ -2653,32 +2641,28 @@ Specify another directory, please. Gui::Dialog::IconDialog - - Add icon - 添加图标 - Icon folders - + Icon folders Add icon folder - + Add icon folder Gui::Dialog::IconFolders Add or remove custom icon folders - + Add or remove custom icon folders Remove folder - + Remove folder Removing a folder only takes effect after an application restart. - + Removing a folder only takes effect after an application restart. @@ -2932,11 +2916,11 @@ Specify another directory, please. Incorrect quantity - + Incorrect quantity There are input fields with incorrect input, please ensure valid placement values! - + There are input fields with incorrect input, please ensure valid placement values! @@ -3176,39 +3160,39 @@ Specify another directory, please. Search - + Search Searches object labels - + Searches object labels Clears the search field - + Clears the search field Select only - + Select only Selects only this object - + Selects only this object Deselect - + 取消选定 Deselects this object - + Deselects this object Zoom fit - + Zoom fit Selects and fits this object in the 3D window - + Selects and fits this object in the 3D window Go to selection @@ -3216,7 +3200,7 @@ Specify another directory, please. Selects and locates this object in the tree view - + Selects and locates this object in the tree view @@ -3469,7 +3453,7 @@ Do you want to save your changes? Gui::LabelEditor List - + List @@ -3664,7 +3648,7 @@ How do you want to proceed? Clear list - + Clear list @@ -4182,7 +4166,7 @@ Do you want to specify another directory? Input in line %1 is not a number - + Input in line %1 is not a number @@ -4423,10 +4407,6 @@ Do you want to continue? Unsaved document 未保存的文件 - - Save document before close? - 关闭前保存文档? - Save Macro 保存宏 @@ -4582,11 +4562,11 @@ You either have to finish or cancel the editing in the task panel. Do you want to save your changes to document '%1' before closing? - + Do you want to save your changes to document '%1' before closing? If you don't save, your changes will be lost. - + If you don't save, your changes will be lost. @@ -5364,11 +5344,11 @@ You either have to finish or cancel the editing in the task panel. Cannot open file - + Cannot open file Loading the file %1 is not supported - + Loading the file %1 is not supported @@ -6123,21 +6103,13 @@ You either have to finish or cancel the editing in the task panel. Standard-View 标准视图 - - Stereo red/green - 三维成像 红/绿 - - - Switch stereo viewing to red/green - 切换三维成像视图为红/绿显示 - Stereo red/cyan - + Stereo red/cyan Switch stereo viewing to red/cyan - + Switch stereo viewing to red/cyan @@ -6238,11 +6210,11 @@ You either have to finish or cancel the editing in the task panel. FreeCAD-VR - + FreeCAD-VR Extend the FreeCAD 3D Window to a Oculus Rift - + Extend the FreeCAD 3D Window to a Oculus Rift diff --git a/src/Gui/Language/FreeCAD_zh-TW.qm b/src/Gui/Language/FreeCAD_zh-TW.qm index bebc41cb2f..58e51ba171 100644 Binary files a/src/Gui/Language/FreeCAD_zh-TW.qm and b/src/Gui/Language/FreeCAD_zh-TW.qm differ diff --git a/src/Gui/Language/FreeCAD_zh-TW.ts b/src/Gui/Language/FreeCAD_zh-TW.ts index f9bc96c1e0..5380096389 100644 --- a/src/Gui/Language/FreeCAD_zh-TW.ts +++ b/src/Gui/Language/FreeCAD_zh-TW.ts @@ -312,7 +312,7 @@ while doing a left or right click and move the mouse up or down Word size - Word size + 字型大小 @@ -486,13 +486,9 @@ while doing a left or right click and move the mouse up or down Choose Icon 選擇圖示 - - Add icons... - 添加圖示... - Icon folders... - + 圖示資料夾... @@ -941,87 +937,87 @@ Please define another shortcut. Aluminium - + 鋁 Brass - + 黃銅 Bronze - + 青銅 Copper - + 銅 Chrome - + 鉻 Emerald - + 祖母綠 Gold - + 金 Jade - + 玉 Metalized - + 金屬化 Neon GNC - + Neon GNC Neon PHC - + Neon PHC Obsidian - + 黑曜岩 Pewter - + 錫鉛合金 Plaster - + 石膏 Plastic - + 塑膠 Ruby - + 紅寶石 Satin - + 緞布 Shiny plastic - + 亮面塑膠 Silver - + 銀 Steel - + 鋼 Stone - + 石頭 @@ -1585,23 +1581,19 @@ Specify another directory, please. Gui::Dialog::DlgPropertyLink Link - Link + 連結 Show all object types - Show all object types + 顯示所有物件類型 No selection 未選取 - - Please select an object of the list - Please select an object of the list - Please select an object from the list - + 請從清單中選擇一個物件 @@ -1782,7 +1774,7 @@ Specify another directory, please. Anti-Aliasing - Anti-Aliasing + 反鋸齒 None @@ -1790,19 +1782,19 @@ Specify another directory, please. Line Smoothing - Line Smoothing + 線條平滑化 MSAA 2x - MSAA 2x + 反鋸齒 2x MSAA 4x - MSAA 4x + 反鋸齒 4x MSAA 8x - MSAA 8x + 反鋸齒 8x @@ -1975,75 +1967,75 @@ Specify another directory, please. Authoring and License - + 授權及版權 Author name - + 作者 <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> - + <html><head/><body><p>用做檔案創作者之名稱</p><p>留白則為匿名</p><p>您可以使用此種格式:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> If this is checked, the "Last modified by" field will be set when saving the file - + 若勾選此項,「最後修改者為」區域將於儲存檔案時設定 Set on save - + 儲存時設定 Company - + 公司 Default license - + 預設授權 The default license for new documents - + 新文件的預設授權 All rights reserved - + 版權所有 CreativeCommons Attribution - + 姓名標示之創用CC授權 CreativeCommons Attribution-ShareAlike - + 姓名標示-相同方式分享之創用CC授權 CreativeCommons Attribution-NoDerivatives - + 姓名標示─禁止改作之創用CC授權 CreativeCommons Attribution-NonCommercial - + 姓名標示─非商業性之創用CC授權 CreativeCommons Attribution-NonCommercial-ShareAlike - + 姓名標示─非商業性─相同方式分享之創用CC授權 CreativeCommons Attribution-NonCommercial-NoDerivatives - + 姓名標示─非商業性─禁止改作之創用CC授權 Public Domain - + 公眾領域 FreeArt - + 自由藝術 Other - + 其他 License URL @@ -2051,15 +2043,15 @@ Specify another directory, please. An URL where the user can find more details about the license - + 一個使用者可以找到更多有關授權說明之網址 http://en.wikipedia.org/wiki/All_rights_reserved - + http://en.wikipedia.org/wiki/All_rights_reserved The default company to use for new files - + 新檔案預設之公司名稱 @@ -2155,10 +2147,6 @@ Specify another directory, please. Black 黑色 - - Transparent - 透明 - Image dimensions 影像尺寸 @@ -2411,7 +2399,7 @@ Specify another directory, please. Imperial decimal (in/lb) - Imperial decimal (in/lb) + 美制(吋/磅) @@ -2649,32 +2637,28 @@ Specify another directory, please. Gui::Dialog::IconDialog - - Add icon - 添加圖示 - Icon folders - + 圖示資料夾 Add icon folder - + 增加圖示資料夾 Gui::Dialog::IconFolders Add or remove custom icon folders - + 增加或刪除自訂圖示資料夾 Remove folder - + 刪除資料夾 Removing a folder only takes effect after an application restart. - + 僅於應用程式重新啟動後才移除資料夾 @@ -2928,11 +2912,11 @@ Specify another directory, please. Incorrect quantity - + 錯誤的數量 There are input fields with incorrect input, please ensure valid placement values! - + 於輸入區域有錯誤的內容,請確認該區域合理之輸入內容 @@ -3172,39 +3156,39 @@ Specify another directory, please. Search - + 搜尋 Searches object labels - + 搜尋物件標籤 Clears the search field - + 清除搜尋 Select only - + 僅選擇 Selects only this object - + 僅選擇此物件 Deselect - + 取消選擇 Deselects this object - + 取消選擇此物件 Zoom fit - + 最適化縮放 Selects and fits this object in the 3D window - + 於3D視窗選取並聚焦於此物件 Go to selection @@ -3212,7 +3196,7 @@ Specify another directory, please. Selects and locates this object in the tree view - + 於樹狀圖選取並定位此物件 @@ -3404,31 +3388,31 @@ Do you want to save your changes? Gui::GraphvizView PNG format (*.png) - PNG format (*.png) + PNG 格式 (*.png) Bitmap format (*.bmp) - Bitmap format (*.bmp) + 點陣圖格式 （*.bmp） GIF format (*.gif) - GIF format (*.gif) + GIF 格式 (*.gif) JPG format (*.jpg) - JPG format (*.jpg) + JPG 格式 (*.jpg) SVG format (*.svg) - SVG format (*.svg) + SVG 格式 (*.svg) PDF format (*.pdf) - PDF format (*.pdf) + PDF 格式 (*.pdf) Export graph - Export graph + 匯出圖形 @@ -3465,7 +3449,7 @@ Do you want to save your changes? Gui::LabelEditor List - + 清單 @@ -3659,7 +3643,7 @@ How do you want to proceed? Clear list - + 清除清單 @@ -4175,7 +4159,7 @@ Do you want to specify another directory? Input in line %1 is not a number - + 於%1之輸入並非數字 @@ -4416,10 +4400,6 @@ Do you want to continue? Unsaved document 未儲存文件 - - Save document before close? - 關閉之前先存檔? - Save Macro 儲存巨集 @@ -4572,11 +4552,11 @@ You either have to finish or cancel the editing in the task panel. Do you want to save your changes to document '%1' before closing? - + 於關閉前要儲存「%1」檔嘛? If you don't save, your changes will be lost. - + 若不儲存將會失去所有修改 @@ -5354,11 +5334,11 @@ You either have to finish or cancel the editing in the task panel. Cannot open file - + 無法開啟檔案 Loading the file %1 is not supported - + 並不支援載入之%1檔 @@ -6113,21 +6093,13 @@ You either have to finish or cancel the editing in the task panel. Standard-View 標準視景 - - Stereo red/green - 立體視圖紅/綠 - - - Switch stereo viewing to red/green - 轉換立體視圖為紅/綠 - Stereo red/cyan - + Stereo red/cyan Switch stereo viewing to red/cyan - + Switch stereo viewing to red/cyan @@ -6228,11 +6200,11 @@ You either have to finish or cancel the editing in the task panel. FreeCAD-VR - + FreeCAD-虛擬實境 Extend the FreeCAD 3D Window to a Oculus Rift - + 延伸FreeCAD 3D視窗到Oculus Rift diff --git a/src/Gui/Language/translation.qrc b/src/Gui/Language/translation.qrc index 096c56a533..b4ffe9952a 100644 --- a/src/Gui/Language/translation.qrc +++ b/src/Gui/Language/translation.qrc @@ -34,5 +34,6 @@ FreeCAD_ro.qm FreeCAD_hu.qm FreeCAD_pt-PT.qm + FreeCAD_sr.qm diff --git a/src/Mod/Arch/Resources/Arch.qrc b/src/Mod/Arch/Resources/Arch.qrc index 22678e13e2..9914d59cff 100644 --- a/src/Mod/Arch/Resources/Arch.qrc +++ b/src/Mod/Arch/Resources/Arch.qrc @@ -83,5 +83,6 @@ translations/Arch_zh-CN.qm translations/Arch_ro.qm translations/Arch_pt-PT.qm + translations/Arch_sr.qm diff --git a/src/Mod/Arch/Resources/translations/Arch.ts b/src/Mod/Arch/Resources/translations/Arch.ts index 634a35bd28..85666462a1 100644 --- a/src/Mod/Arch/Resources/translations/Arch.ts +++ b/src/Mod/Arch/Resources/translations/Arch.ts @@ -168,7 +168,7 @@ - + Roof @@ -368,7 +368,7 @@ - + file %s successfully created. @@ -942,7 +942,7 @@ - + Parameters of the profiles of the roof: * Angle : slope in degrees compared to the horizontal one. * Run : outdistance between the wall and the ridge sheathing. @@ -957,12 +957,12 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela - + Id - + IdRel @@ -1148,27 +1148,27 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela - + Angle (deg) - + Run (mm) - + Thickness (mm) - + Overhang (mm) - + Height (mm) diff --git a/src/Mod/Arch/Resources/translations/Arch_af.qm b/src/Mod/Arch/Resources/translations/Arch_af.qm index 3b6810045b..c0fd5504cd 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_af.qm and b/src/Mod/Arch/Resources/translations/Arch_af.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_af.ts b/src/Mod/Arch/Resources/translations/Arch_af.ts index 938aa70c2a..58b8925cc0 100644 --- a/src/Mod/Arch/Resources/translations/Arch_af.ts +++ b/src/Mod/Arch/Resources/translations/Arch_af.ts @@ -4,407 +4,362 @@ Arch - + Components Komponente - + Components of this object Komponente van hierdie voorwerp - + Axes Asse - + Create Axis Skep As - + The intervals between axes Die intervalle tussen asse - + The angles of each axis Die hoeke van elke as - + The length of the axes Die lengte van die asse - + The size of the axis bubbles Die grootte van die asborrels - + Remove Verwyder - + Add Voeg by - + Axis As - + Distance Afstand - + Angle Hoek - - Building - Bou - - - + Type conversion Tipe-omskakeling - + Create Building Skep gebou - + Floor Vloer - + removing sketch support to avoid cross-referencing staak sketsondersteuning om kruisverwysings te vermy - - No objects are cut by the plane - Geen voorwerpe is gesny deur die vlak nie - - - + is not closed is nie gesluit nie - + is not valid is nie geldig nie - + doesn't contain any solid bevat nie enige soliede nie - + contains a non-closed solid bevat 'n nie-geslote soliede - + contains faces that are not part of any solid bevat vlakke wat nie deel is van 'n soliede nie - + Grouping Groepering - + Ungrouping Verdeel groepe - + Split Mesh Deel maas op - + Mesh to Shape Maas na Vorm - + All good! no problems found Alles in orde! Geen probleme gevind nie - + Base component Basiskomponent - + Additions Toevoegings - + Subtractions Aftrekkings - + Objects Voorwerpe - + closing Sketch edit sluit Sketswysiging - + The height of this floor Die hoogte van hierdie vloer - + Roof Dak - + Create Roof Skep dak - + Unable to create a roof Nie in staat om 'n dak te skep nie - - The angle of this roof - Die hoek van hierdie dak - - - + The face number of the base object used to build this roof Die vlaknommer van die basisvoorwerp wat gebruik word om hierdie dak te bou - + Page Bladsy - + View of Aansig van - + Create Section Plane Skep snydingsvlak - + The objects that must be considered by this section plane. Empty means all document Die voorwerpe wat in ag geneem moet word deur hierdie snydingsvlak. Leeg beteken alles - - The display size of this section plane - Die vertoningsgrootte van hierdie snyvlak - - - - No shape has been computed yet, select wireframe rendering and render again - Geen vorm is bereken nie, kies draadmodelaansig en probeer weer - - - + Skipping invalid object: Slaan ongeldige voorwerp oor: - - Site - Plek - - - + Create Site Skep ligging - - Structure - Struktuur - - - + Create Structure Skep struktuur - + The length of this element, if not based on a profile Die lengte van hierdie element, indien nie gebaseer op 'n profiel nie - + The width of this element, if not based on a profile Die breedte van hierdie element, indien nie gebaseer op 'n profiel nie - + The height or extrusion depth of this element. Keep 0 for automatic Die hoogte of strekdiepte van hierdie element. Behou 0 vir outomaties - + Axes systems this structure is built on Asstelsels waarop hierdie struktuur gebou is - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Die normale strekrigting van die voorwerp (behou (0,0,0) vir outomatiese normaallyn) - + The element numbers to exclude when this structure is based on axes Die elementgetalle om uit te sluit wanneer hierdie struktuur op asse gebaseer is - - Wall - Muur - - - + Create Wall Skep muur - + WallTrace Muuraftekening - + Wall options Muuropsies - + Width Breedte - + Height Hoogte - + Alignment Oplyning - + The width of this wall. Not used if this wall is based on a face Die breedte van die muur. Word nie gebruik indien hierdie muur gebaseer is op 'n vlak nie - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Die hoogte van die muur. Hou 0 vir outomatiese hoogte. Word nie gebruik indien hierdie muur gebaseer is op 'n soliede nie - + The alignment of this wall on its base object, if applicable Die belyning van die muur op die basisvoorwerp, indien van toepassing - + Error: Invalid base object Fout: Ongeldige basisvoorwerp - + This mesh is an invalid solid Hierdie maas is 'n ongeldig soliede - - Window - Venster - - - + Create Window Skep venster - + the components of this window die komponente van hierdie venster - + Edit Wysig - + Create/update component Skep/opdateer die komponent - + Base 2D object Basis 2D-komponent - + Wires Drade - + Create new component Skep 'n nuwe komponent - + Name Naam - + Type Soort - + Thickness Dikte - + Z offset Z-verskuiwing @@ -419,73 +374,68 @@ lêer %s suksesvol geskep. - + Error: Couldn't determine character encoding Error: Couldn't determine character encoding - + Couldn't locate IfcOpenShell Couldn't locate IfcOpenShell - + IFC Schema not found, IFC import disabled. IFC Schema not found, IFC import disabled. - + successfully written successfully written - + The numbering style The numbering style - + removing sketch external references to avoid cross-referencing removing sketch external references to avoid cross-referencing - - Invalid cutplane - Invalid cutplane - - - + Add space boundary Add space boundary - + Remove space boundary Remove space boundary - + Please select a base object Please select a base object - + Fixtures Fixtures - + Armatures Armatures - + The placement of this group The placement of this group @@ -495,171 +445,146 @@ Frame - + Create Frame Create Frame - - Rebar - Rebar - - - + Create Rebar Create Rebar - + Please select a base face on a structural object Please select a base face on a structural object - + Please select a base object Please select a base object - - Section - Interseksie - - - + The placement of this object The placement of this object - + The terrain of this site The terrain of this site - + The address of this site The address of this site - + The geographic coordinates of this site The geographic coordinates of this site - + An url that shows this site in a mapping website An url that shows this site in a mapping website - - Space - Space - - - + Create Space Create Space - - A base shape defining this space - A base shape defining this space - - - + The objects that make the boundaries of this space object The objects that make the boundaries of this space object - - Stairs - Stairs - - - + Create Stairs Create Stairs - + The length of these stairs, if no baseline is defined The length of these stairs, if no baseline is defined - + The width of these stairs The width of these stairs - + The total height of these stairs The total height of these stairs - + The alignment of these stairs on their baseline, if applicable The alignment of these stairs on their baseline, if applicable - + The number of risers in these stairs The number of risers in these stairs - + The depth of the treads of these stairs The depth of the treads of these stairs - + The height of the risers of these stairs The height of the risers of these stairs - + The size of the nosing The size of the nosing - + The thickness of the treads The thickness of the treads - + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in - + The type of landings of these stairs The type of landings of these stairs - + The type of winders in these stairs The type of winders in these stairs - + The type of structure of these stairs The type of structure of these stairs - + The thickness of the massive structure or of the stringers The thickness of the massive structure or of the stringers - + The width of the stringers The width of the stringers - + The offset between the border of the stairs and the structure The offset between the border of the stairs and the structure @@ -674,139 +599,124 @@ Steel - + Structure options Structure options - + Preset Preset - + Length Lengte - + Rotate Roteer - + Con&tinue Con&tinue - + An optional extrusion path for this element An optional extrusion path for this element - + Armatures contained in this element Armatures contained in this element - - The role of this structural element - The role of this structural element - - - + The structural nodes of this element The structural nodes of this element - + Error: The base shape couldn't be extruded along this tool object Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape Couldn't compute a shape - + Merge Wall Merge Wall - + The selected wall contain no subwall to merge The selected wall contain no subwall to merge - + Please select only wall objects Please select only wall objects - + Merge Walls Merge Walls - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) - + Pick a face on an existing object or select a preset Pick a face on an existing object or select a preset - + Window options Window options - + The depth of the hole that this window makes in its host object. Keep 0 for automatic. The depth of the hole that this window makes in its host object. Keep 0 for automatic. - - an optional volume to be subtracted from hosts of this window - an optional volume to be subtracted from hosts of this window - - - + The width of this window (for preset windows only) The width of this window (for preset windows only) - + The height of this window (for preset windows only) The height of this window (for preset windows only) - + The normal direction of this window The normal direction of this window - - The role of this window - The role of this window - - - + Unable to create component Unable to create component @@ -820,46 +730,36 @@ - + IfcOpenShell not found or disabled, falling back on internal parser. IfcOpenShell not found or disabled, falling back on internal parser. - + Distances (mm) and angles (deg) between axes Distances (mm) and angles (deg) between axes - + Error computing the shape of this object Error computing the shape of this object - - StructuralSystem - StructuralSystem - - - + Create Structural System Create Structural System - - The role of this wall - The role of this wall - - - + Error: IfcOpenShell is not installed Error: IfcOpenShell is not installed - + Error: your IfcOpenShell version is too old Error: your IfcOpenShell version is too old @@ -872,16 +772,455 @@ Found a shape containing curves, triangulating + + + Invalid cutplane + + Invalid cutplane + + + + + No objects are cut by the plane + + No objects are cut by the plane + + + + + Object doesn't have settable IFC Attributes + Object doesn't have settable IFC Attributes + + + + Disabling Brep force flag of object + Disabling Brep force flag of object + + + + Enabling Brep force flag of object + Enabling Brep force flag of object + + + + The base object this component is built upon + The base object this component is built upon + + + + Other shapes that are appended to this object + Other shapes that are appended to this object + + + + Other shapes that are subtracted from this object + Other shapes that are subtracted from this object + + + + An optional description for this component + An optional description for this component + + + + An optional tag for this component + An optional tag for this component + + + + Custom IFC properties and attributes + Custom IFC properties and attributes + + + + A material for this object + A material for this object + + + + The role of this object + The role of this object + + + + Specifies if this object must move together when its host is moved + Specifies if this object must move together when its host is moved + + + + has no solid + has no solid + + + + has an invalid shape + has an invalid shape + + + + has a null shape + has a null shape + + + + Cutting + Cutting + + + + You must select a base object first! + You must select a base object first! + + + + Create Equipment + Create Equipment + + + + You must select exactly one base object + You must select exactly one base object + + + + The selected object must be a mesh + The selected object must be a mesh + + + + This mesh has more than 1000 facets. + This mesh has more than 1000 facets. + + + + This operation can take a long time. Proceed? + This operation can take a long time. Proceed? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + The mesh has more than 500 facets. This will take a couple of minutes... + + + + Create 3 views + Create 3 views + + + + an optional 2D shape representing a top view of this equipment + an optional 2D shape representing a top view of this equipment + + + + an optional 2D shape representing a front view of this equipment + an optional 2D shape representing a front view of this equipment + + + + an optional 2D shape representing a side view of this equipment + an optional 2D shape representing a side view of this equipment + + + + The model description of this equipment + The model description of this equipment + + + + The url of the product page of this equipment + The url of the product page of this equipment + + + + Create Panel + Create Panel + + + + Panel options + Panel options + + + + The thickness or extrusion depth of this element + The thickness or extrusion depth of this element + + + + The number of sheets to use + The number of sheets to use + + + + The offset between this panel and its baseline + The offset between this panel and its baseline + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + + + + Id + Id + + + + IdRel + IdRel + + + + If false, non-solids will be cut too, with possible wrong results. + If false, non-solids will be cut too, with possible wrong results. + + + + The display length of this section plane + The display length of this section plane + + + + The display height of this section plane + The display height of this section plane + + + + The size of the arrows of this section plane + The size of the arrows of this section plane + + + + The computed floor area of this space + The computed floor area of this space + + + + The finishing of the floor of this space + The finishing of the floor of this space + + + + The finishing of the walls of this space + The finishing of the walls of this space + + + + The finishing of the ceiling of this space + The finishing of the ceiling of this space + + + + Objects that are included inside this space, such as furniture + Objects that are included inside this space, such as furniture + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + + + + The name of the font + The name of the font + + + + The color of the area text + The color of the area text + + + + The size of the text font + The size of the text font + + + + The size of the first line of text + The size of the first line of text + + + + The space between the lines of text + The space between the lines of text + + + + The position of the text. Leave (0,0,0) for automatic position + The position of the text. Leave (0,0,0) for automatic position + + + + The justification of the text + The justification of the text + + + + The number of decimals to use for calculated texts + The number of decimals to use for calculated texts + + + + Show the unit suffix + Show the unit suffix + + + + A description of the standard profile this element is based upon + A description of the standard profile this element is based upon + + + + Sill height + Sill height + + + + CutVolume + CutVolume + + + + CutPlane + CutPlane + + + + PreviewCutVolume + PreviewCutVolume + + + + Cut Plane + Cut Plane + + + + Cut Plane options + Cut Plane options + + + + Wich side to cut + Wich side to cut + + + + Behind + Behind + + + + Front + Vooraansig + + + + Crossing point not found in profile. + + Crossing point not found in profile. + + + + + A list of angles for each roof pane + A list of angles for each roof pane + + + + A list of horizontal length projections for each roof pane + A list of horizontal length projections for each roof pane + + + + A list of IDs of relative profiles for each roof pane + A list of IDs of relative profiles for each roof pane + + + + A list of thicknesses for each roof pane + A list of thicknesses for each roof pane + + + + A list of overhangs for each roof pane + A list of overhangs for each roof pane + + + + A list of calculated heights for each roof pane + A list of calculated heights for each roof pane + + + + Angle (deg) + Angle (deg) + + + + Run (mm) + Run (mm) + + + + Thickness (mm) + Thickness (mm) + + + + Overhang (mm) + Overhang (mm) + + + + Height (mm) + Height (mm) + + + + Arch_3Views + + + 3 views from mesh + 3 views from mesh + + + + Creates 3 views (top, front, side) from a mesh-based object + Creates 3 views (top, front, side) from a mesh-based object + Arch_Add - + Add component Voeg komponent by - + Adds the selected components to the active object Voeg die gekose komponente by die aktiewe voorwerp @@ -889,12 +1228,12 @@ Arch_Axis - + Axis As - + Creates an axis system. Creates an axis system. @@ -902,12 +1241,12 @@ Arch_Building - + Building Bou - + Creates a building object including selected objects. Skep 'n bouvoorwerp wat die gekose voorwerpe insluit. @@ -915,17 +1254,17 @@ Arch_Check - + Check Check - + Checks the selected objects for problems Checks the selected objects for problems - + Explore the contents of an Ifc file Explore the contents of an Ifc file @@ -933,18 +1272,41 @@ Arch_CloseHoles - + Close holes Close holes - + Closes holes in open shapes, turning them solids Closes holes in open shapes, turning them solids - Arch_Fixture + Arch_CutPlane + + + Cut with plane + Cut with plane + + + + Cut an object with a plane + Cut an object with a plane + + + + Arch_Equipment + + + Equipment + Equipment + + + + Creates an equipment object from a selected object (Part or Mesh) + Creates an equipment object from a selected object (Part or Mesh) + Arch_Floor @@ -962,12 +1324,12 @@ Arch_Frame - + Frame Frame - + Creates a frame object from a planar 2D object and a profile Creates a frame object from a planar 2D object and a profile @@ -975,7 +1337,7 @@ Arch_IfcExplorer - + Ifc Explorer Ifc Explorer @@ -983,12 +1345,12 @@ Arch_MergeWalls - + Merge Walls Merge Walls - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -996,25 +1358,38 @@ Arch_MeshToShape - + Mesh to Shape Maas na Vorm - + Turns selected meshes into Part Shape objects Turns selected meshes into Part Shape objects + + Arch_Panel + + + Panel + Panel + + + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + + Arch_Rebar - + Rebar Rebar - + Creates a Reinforcement bar from the selected face of a structural object Creates a Reinforcement bar from the selected face of a structural object @@ -1022,12 +1397,12 @@ Arch_Remove - + Remove component Verwyder komponent - + Remove the selected components from their parents, or create a hole in a component Verwyder die gekose komponente van hulle moederkomponente, of skep 'n gat in 'n komponent @@ -1035,12 +1410,12 @@ Arch_RemoveShape - + Remove Shape from Arch Verwyder Vorm van Boog - + Removes cubic shapes from Arch components Verwyder kubiese vorms van boogkomponente @@ -1048,25 +1423,25 @@ Arch_Roof - + Roof Dak - - Creates a roof object from the selected face of an object - Creates a roof object from the selected face of an object + + Creates a roof object from the selected wire. + Creates a roof object from the selected wire. Arch_SectionPlane - + Section Plane Snitvlak - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects @@ -1074,12 +1449,12 @@ Arch_SelectNonSolidMeshes - + Select non-manifold meshes Kies nie-menigvoudige mase - + Selects all non-manifold meshes from the document or from the selected groups Selekteer al die nie-menigvoudige mase van die dokument of van die gekose groepe @@ -1087,12 +1462,12 @@ Arch_Site - + Site Plek - + Creates a site object including selected objects. Skep 'n plaaslike voorwerp wat die gekose voorwerpe insluit. @@ -1100,17 +1475,17 @@ Arch_Space - + Space Space - + Creates a space object from selected boundary objects Creates a space object from selected boundary objects - + Creates a stairs object Creates a stairs object @@ -1118,12 +1493,12 @@ Arch_SplitMesh - + Split Mesh Deel maas op - + Splits selected meshes into independent components Deel gekose mase op in onafhanklike komponente @@ -1131,7 +1506,7 @@ Arch_Stairs - + Stairs Stairs @@ -1139,12 +1514,12 @@ Arch_Structure - + Structure Struktuur - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Skep 'n struktuurvoorwerp opnuut of van 'n gekose voorwerp (skets, draad, oppervlak of soliede) @@ -1152,25 +1527,38 @@ Arch_Survey - + Survey Survey - + Starts survey Starts survey + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Toggle IFC Brep flag + + + + Force an object to be exported as Brep or not + Force an object to be exported as Brep or not + + Arch_Wall - + Wall Muur - + Creates a wall object from scratch or from a selected object (wire, face or solid) Skep 'n muurvoorwerp van nuuts of van 'n gekose voorwerp (draad, vlak of soliede) @@ -1178,12 +1566,12 @@ Arch_Window - + Window Venster - + Creates a window object from a selected object (wire, rectangle or sketch) Creates a window object from a selected object (wire, rectangle or sketch) @@ -1210,16 +1598,6 @@ IFC import IFC import - - - Creates groups for each Arch object type - Creates groups for each Arch object type - - - - Group components by types - Group components by types - 2D rendering @@ -1246,22 +1624,22 @@ Specifies how many times the viewed line thickness must be applied to cut lines - + Width: Wydte: - + Height: Hoogte: - + Color: Color: - + Length: Lengte: @@ -1375,11 +1753,6 @@ Cut method Cut method - - - Import / export - Import / export - Check this to display debug messages while importing IFC files @@ -1392,74 +1765,44 @@ - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - - - - Force python parser - Force python parser - - - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - + Separate openings Separate openings - + If this is checked, object names will be prefixed with the IFC ID number If this is checked, object names will be prefixed with the IFC ID number - + Prefix names with ID number Prefix names with ID number - + Exclude list: Exclude list: - + A comma-separated list of Ifc entities to exclude from import A comma-separated list of Ifc entities to exclude from import - - Custom IFC schema (internal parser only) - Custom IFC schema (internal parser only) - - - + IFC export IFC export - + Scaling factor Scaling factor - - - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - - - - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - - - - Save a list of exported objects - Save a list of exported objects - Snap to baselines of Arch objects (override with CTRL) @@ -1476,7 +1819,7 @@ Walls - + mm mm @@ -1501,95 +1844,103 @@ Deursigtigheid: - - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - - - - Separate placements - Separate placements - - - - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - - - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. - - Force export as Breps - Force export as Breps - - - - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - - - - Join multi-solid objects - Join multi-solid objects - - - + Collada export Collada export - - WebGL export - WebGL export + + Hidden geomety pattern + Hidden geomety pattern - - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + This is the SVG stroke-dasharray property to apply to projections of hidden objects. - - Discretize wires - Discretize wires + + 30, 10 + 30, 10 + + + + Stairs + Stairs + + + + Number of steps: + Number of steps: + + + + Panels + Panels + + + + mm + mm + + + + Thickness + Dikte + + + + IFC / DAE / WebGL + IFC / DAE / WebGL + + + + Force export as Brep + Force export as Brep + + + + Workbench + + + Arch tools + Arch tools + + + + Draft tools + Draft tools + + + + Draft mod tools + Draft mod tools arch - - Arch tools - Boogwerktuie - - - - Draft tools - Tekenwerktuie - - - - Draft mod tools - Draft mod tools - - - + &Architecture &Architecture - + &Draft &Draft - + Utilities Utilities - + Snapping Snapping diff --git a/src/Mod/Arch/Resources/translations/Arch_cs.qm b/src/Mod/Arch/Resources/translations/Arch_cs.qm index d3450dcc74..5db553d639 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_cs.qm and b/src/Mod/Arch/Resources/translations/Arch_cs.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_cs.ts b/src/Mod/Arch/Resources/translations/Arch_cs.ts index 9e21f56057..0761354d61 100644 --- a/src/Mod/Arch/Resources/translations/Arch_cs.ts +++ b/src/Mod/Arch/Resources/translations/Arch_cs.ts @@ -4,407 +4,362 @@ Arch - + Components Komponenty - + Components of this object Díly tohoto objektu - + Axes Osy - + Create Axis Vytvořit osu - + The intervals between axes Mezery mezi osami - + The angles of each axis Úhly každé osy - + The length of the axes Délka os - + The size of the axis bubbles Velikost bubliny osy - + Remove Odstranit - + Add Přidat - + Axis Osa - + Distance Distance - + Angle Úhel - - Building - Budova - - - + Type conversion Typ převodu - + Create Building Vytvořit budovu - + Floor Podlaha - + removing sketch support to avoid cross-referencing Odstraní rovinu náčrtu pro předejití křížového odkazu - - No objects are cut by the plane - Žádné objekty nejsou přerušeny rovinou - - - + is not closed není uzavřeno - + is not valid není platný - + doesn't contain any solid neobsahuje žádné těleso - + contains a non-closed solid obsahuje neuzavřené těleso - + contains faces that are not part of any solid obsahuje plochy které nejsou součástí žádného tělesa - + Grouping Seskupování - + Ungrouping Rozdělit skupinu - + Split Mesh Split Mesh - + Mesh to Shape Mesh to Shape - + All good! no problems found Vše v pořádku! nebyly zjištěny žádné problémy - + Base component Základní díl - + Additions Sečtení - + Subtractions Rozdíl - + Objects Objekty - + closing Sketch edit Ukončit úpravu náčrtu - + The height of this floor Výška této podlahy - + Roof Střecha - + Create Roof Vytvořit střechu - + Unable to create a roof Nelze vytvořit střechu - - The angle of this roof - Úhel této střechy - - - + The face number of the base object used to build this roof Počet ploch základního objektu použitých pro vytvoření této střechy - + Page Stránka - + View of Pohled na - + Create Section Plane Vytvoření roviny řezu - + The objects that must be considered by this section plane. Empty means all document The objects that must be considered by this section plane. Empty means all document - - The display size of this section plane - The display size of this section plane - - - - No shape has been computed yet, select wireframe rendering and render again - No shape has been computed yet, select wireframe rendering and render again - - - + Skipping invalid object: - Skipping invalid object: + Přeskočení neplatného objektu: - - Site - Site - - - + Create Site Create Site - - Structure - Struktura - - - + Create Structure Vytvořit strukturu - + The length of this element, if not based on a profile Délka tohoto prvku, není-li založena na profilu - + The width of this element, if not based on a profile Šířka tohoto prvku, není-li založena na profilu - + The height or extrusion depth of this element. Keep 0 for automatic Výška tohoto prvku, není-li založena na profilu - + Axes systems this structure is built on Systém os této konstrukce je založen na - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Normálový směr vytažení tohoto objektu (pro (0,0,0) automatická normála) - + The element numbers to exclude when this structure is based on axes Počet elementů pro vyjmutí když tato struktura je založena na ose - - Wall - Zeď - - - + Create Wall Vytvořit zeď - + WallTrace Stopa stěny - + Wall options Volby stěny - + Width Šířka - + Height Výška - + Alignment Zarovnání - + The width of this wall. Not used if this wall is based on a face Šířka této zdi. Není použita, je-li zeď založena na ploše - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid + Výška této stěny. Zvol 0 pro automatické nastavení. Není použito, pokud je stěna plná - + The alignment of this wall on its base object, if applicable The alignment of this wall on its base object, if applicable - + Error: Invalid base object Chyba: Neplatný základní objekt - + This mesh is an invalid solid This mesh is an invalid solid - - Window - Okno - - - + Create Window Vytvořit okno - + the components of this window součásti tohoto okna - + Edit Upravit - + Create/update component Vytvořit/aktualizovat díl - + Base 2D object Základní 2D objekt - + Wires Dráty - + Create new component Vytvořit nový díl - + Name Jméno - + Type Typ - + Thickness Tloušťka - + Z offset Z posun @@ -419,73 +374,68 @@ soubor %s byl úspěšně vytvořen. - + Error: Couldn't determine character encoding Chyba: Nelze určit kódování znaků - + Couldn't locate IfcOpenShell Nelze najít IfcOpenShell - + IFC Schema not found, IFC import disabled. - IFC Schema not found, IFC import disabled. + IFC schéma nenalezeno. IFC import zakázán. - + successfully written úspěšně zapsáno - + The numbering style - The numbering style + Styl číslování - + removing sketch external references to avoid cross-referencing - removing sketch external references to avoid cross-referencing + odstranění externích referencí skici, aby se zabránilo křížovým odkazům - - Invalid cutplane - Invalid cutplane - - - + Add space boundary Add space boundary - + Remove space boundary Remove space boundary - + Please select a base object - Please select a base object + Vyber základní objekt - + Fixtures Fixtures - + Armatures Výztuže - + The placement of this group Umístění této skupiny @@ -495,171 +445,146 @@ Rám - + Create Frame Vytvořit rám - - Rebar - Rebar - - - + Create Rebar - Create Rebar + Vytvoř výztuž - + Please select a base face on a structural object Please select a base face on a structural object - + Please select a base object Prosím vyberte základový objekt - - Section - Výběr - - - + The placement of this object Umístění tohoto objektu - + The terrain of this site The terrain of this site - + The address of this site The address of this site - + The geographic coordinates of this site The geographic coordinates of this site - + An url that shows this site in a mapping website An url that shows this site in a mapping website - - Space - Space - - - + Create Space Create Space - - A base shape defining this space - A base shape defining this space - - - + The objects that make the boundaries of this space object The objects that make the boundaries of this space object - - Stairs - Schodiště - - - + Create Stairs Vytvořit schody - + The length of these stairs, if no baseline is defined The length of these stairs, if no baseline is defined - + The width of these stairs - The width of these stairs + Šířka těchto schodů - + The total height of these stairs - The total height of these stairs + Celková výška těchto schodů - + The alignment of these stairs on their baseline, if applicable The alignment of these stairs on their baseline, if applicable - + The number of risers in these stairs The number of risers in these stairs - + The depth of the treads of these stairs The depth of the treads of these stairs - + The height of the risers of these stairs The height of the risers of these stairs - + The size of the nosing The size of the nosing - + The thickness of the treads The thickness of the treads - + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in - + The type of landings of these stairs The type of landings of these stairs - + The type of winders in these stairs The type of winders in these stairs - + The type of structure of these stairs The type of structure of these stairs - + The thickness of the massive structure or of the stringers The thickness of the massive structure or of the stringers - + The width of the stringers The width of the stringers - + The offset between the border of the stairs and the structure The offset between the border of the stairs and the structure @@ -674,139 +599,124 @@ Ocel - + Structure options Volba struktury - + Preset Předvolba - + Length Délka - + Rotate Rotace - + Con&tinue Con&tinue - + An optional extrusion path for this element An optional extrusion path for this element - + Armatures contained in this element Armatures contained in this element - - The role of this structural element - The role of this structural element - - - + The structural nodes of this element The structural nodes of this element - + Error: The base shape couldn't be extruded along this tool object Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape Nemohu vyřešit plochu - + Merge Wall Sloučit stěnu - + The selected wall contain no subwall to merge The selected wall contain no subwall to merge - + Please select only wall objects Prosím vyberte pouze objekty stěny - + Merge Walls Sloučit stěny - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) - + Pick a face on an existing object or select a preset Pick a face on an existing object or select a preset - + Window options Volby okna - + The depth of the hole that this window makes in its host object. Keep 0 for automatic. Hloubka díry kterou toto okno udělá v objektu. Zadání 0 pro automaticky. - - an optional volume to be subtracted from hosts of this window - an optional volume to be subtracted from hosts of this window - - - + The width of this window (for preset windows only) The width of this window (for preset windows only) - + The height of this window (for preset windows only) The height of this window (for preset windows only) - + The normal direction of this window The normal direction of this window - - The role of this window - The role of this window - - - + Unable to create component Unable to create component @@ -820,46 +730,36 @@ - + IfcOpenShell not found or disabled, falling back on internal parser. IfcOpenShell not found or disabled, falling back on internal parser. - + Distances (mm) and angles (deg) between axes Distances (mm) and angles (deg) between axes - + Error computing the shape of this object Error computing the shape of this object - - StructuralSystem - StructuralSystem - - - + Create Structural System Create Structural System - - The role of this wall - The role of this wall - - - + Error: IfcOpenShell is not installed Error: IfcOpenShell is not installed - + Error: your IfcOpenShell version is too old Error: your IfcOpenShell version is too old @@ -872,16 +772,455 @@ Found a shape containing curves, triangulating + + + Invalid cutplane + + Invalid cutplane + + + + + No objects are cut by the plane + + No objects are cut by the plane + + + + + Object doesn't have settable IFC Attributes + Object doesn't have settable IFC Attributes + + + + Disabling Brep force flag of object + Disabling Brep force flag of object + + + + Enabling Brep force flag of object + Enabling Brep force flag of object + + + + The base object this component is built upon + The base object this component is built upon + + + + Other shapes that are appended to this object + Other shapes that are appended to this object + + + + Other shapes that are subtracted from this object + Other shapes that are subtracted from this object + + + + An optional description for this component + An optional description for this component + + + + An optional tag for this component + An optional tag for this component + + + + Custom IFC properties and attributes + Custom IFC properties and attributes + + + + A material for this object + A material for this object + + + + The role of this object + The role of this object + + + + Specifies if this object must move together when its host is moved + Specifies if this object must move together when its host is moved + + + + has no solid + has no solid + + + + has an invalid shape + has an invalid shape + + + + has a null shape + has a null shape + + + + Cutting + Cutting + + + + You must select a base object first! + You must select a base object first! + + + + Create Equipment + Create Equipment + + + + You must select exactly one base object + You must select exactly one base object + + + + The selected object must be a mesh + The selected object must be a mesh + + + + This mesh has more than 1000 facets. + This mesh has more than 1000 facets. + + + + This operation can take a long time. Proceed? + This operation can take a long time. Proceed? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + The mesh has more than 500 facets. This will take a couple of minutes... + + + + Create 3 views + Create 3 views + + + + an optional 2D shape representing a top view of this equipment + an optional 2D shape representing a top view of this equipment + + + + an optional 2D shape representing a front view of this equipment + an optional 2D shape representing a front view of this equipment + + + + an optional 2D shape representing a side view of this equipment + an optional 2D shape representing a side view of this equipment + + + + The model description of this equipment + The model description of this equipment + + + + The url of the product page of this equipment + The url of the product page of this equipment + + + + Create Panel + Create Panel + + + + Panel options + Panel options + + + + The thickness or extrusion depth of this element + The thickness or extrusion depth of this element + + + + The number of sheets to use + The number of sheets to use + + + + The offset between this panel and its baseline + The offset between this panel and its baseline + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + + + + Id + Id + + + + IdRel + IdRel + + + + If false, non-solids will be cut too, with possible wrong results. + If false, non-solids will be cut too, with possible wrong results. + + + + The display length of this section plane + The display length of this section plane + + + + The display height of this section plane + The display height of this section plane + + + + The size of the arrows of this section plane + The size of the arrows of this section plane + + + + The computed floor area of this space + The computed floor area of this space + + + + The finishing of the floor of this space + The finishing of the floor of this space + + + + The finishing of the walls of this space + The finishing of the walls of this space + + + + The finishing of the ceiling of this space + The finishing of the ceiling of this space + + + + Objects that are included inside this space, such as furniture + Objects that are included inside this space, such as furniture + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + + + + The name of the font + The name of the font + + + + The color of the area text + The color of the area text + + + + The size of the text font + The size of the text font + + + + The size of the first line of text + The size of the first line of text + + + + The space between the lines of text + The space between the lines of text + + + + The position of the text. Leave (0,0,0) for automatic position + The position of the text. Leave (0,0,0) for automatic position + + + + The justification of the text + The justification of the text + + + + The number of decimals to use for calculated texts + The number of decimals to use for calculated texts + + + + Show the unit suffix + Show the unit suffix + + + + A description of the standard profile this element is based upon + A description of the standard profile this element is based upon + + + + Sill height + Sill height + + + + CutVolume + CutVolume + + + + CutPlane + CutPlane + + + + PreviewCutVolume + PreviewCutVolume + + + + Cut Plane + Cut Plane + + + + Cut Plane options + Cut Plane options + + + + Wich side to cut + Wich side to cut + + + + Behind + Behind + + + + Front + Přední + + + + Crossing point not found in profile. + + Crossing point not found in profile. + + + + + A list of angles for each roof pane + A list of angles for each roof pane + + + + A list of horizontal length projections for each roof pane + A list of horizontal length projections for each roof pane + + + + A list of IDs of relative profiles for each roof pane + A list of IDs of relative profiles for each roof pane + + + + A list of thicknesses for each roof pane + A list of thicknesses for each roof pane + + + + A list of overhangs for each roof pane + A list of overhangs for each roof pane + + + + A list of calculated heights for each roof pane + A list of calculated heights for each roof pane + + + + Angle (deg) + Angle (deg) + + + + Run (mm) + Run (mm) + + + + Thickness (mm) + Thickness (mm) + + + + Overhang (mm) + Overhang (mm) + + + + Height (mm) + Height (mm) + + + + Arch_3Views + + + 3 views from mesh + 3 views from mesh + + + + Creates 3 views (top, front, side) from a mesh-based object + Creates 3 views (top, front, side) from a mesh-based object + Arch_Add - + Add component Přidat komponentu - + Adds the selected components to the active object Adds the selected components to the active object @@ -889,12 +1228,12 @@ Arch_Axis - + Axis Osa - + Creates an axis system. Vytvořit systém os. @@ -902,12 +1241,12 @@ Arch_Building - + Building Budova - + Creates a building object including selected objects. Vytvoří objekt budovy včetně vybraných objektů. @@ -915,17 +1254,17 @@ Arch_Check - + Check Check - + Checks the selected objects for problems Zkontroluje vybrané objekty na problémy - + Explore the contents of an Ifc file Explore the contents of an Ifc file @@ -933,18 +1272,41 @@ Arch_CloseHoles - + Close holes Uzavřít díry - + Closes holes in open shapes, turning them solids Uzavřít díry v otevřených plochách, vytvoření tělesa - Arch_Fixture + Arch_CutPlane + + + Cut with plane + Cut with plane + + + + Cut an object with a plane + Cut an object with a plane + + + + Arch_Equipment + + + Equipment + Equipment + + + + Creates an equipment object from a selected object (Part or Mesh) + Creates an equipment object from a selected object (Part or Mesh) + Arch_Floor @@ -962,12 +1324,12 @@ Arch_Frame - + Frame Rám - + Creates a frame object from a planar 2D object and a profile Creates a frame object from a planar 2D object and a profile @@ -975,7 +1337,7 @@ Arch_IfcExplorer - + Ifc Explorer Ifc Explorer @@ -983,12 +1345,12 @@ Arch_MergeWalls - + Merge Walls Sloučit stěny - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -996,25 +1358,38 @@ Arch_MeshToShape - + Mesh to Shape Mesh to Shape - + Turns selected meshes into Part Shape objects Turns selected meshes into Part Shape objects - Arch_Rebar + Arch_Panel - - Rebar - Rebar + + Panel + Panel - + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + + + + Arch_Rebar + + + Rebar + Výztuž + + + Creates a Reinforcement bar from the selected face of a structural object Creates a Reinforcement bar from the selected face of a structural object @@ -1022,12 +1397,12 @@ Arch_Remove - + Remove component Odstranit komponent - + Remove the selected components from their parents, or create a hole in a component Odstranit vybrané komponenty z jejich rodičů, nebo vytvořit díry v komponentě @@ -1035,12 +1410,12 @@ Arch_RemoveShape - + Remove Shape from Arch Remove Shape from Arch - + Removes cubic shapes from Arch components Removes cubic shapes from Arch components @@ -1048,25 +1423,25 @@ Arch_Roof - + Roof Střecha - - Creates a roof object from the selected face of an object - Creates a roof object from the selected face of an object + + Creates a roof object from the selected wire. + Creates a roof object from the selected wire. Arch_SectionPlane - + Section Plane Section Plane - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects @@ -1074,12 +1449,12 @@ Arch_SelectNonSolidMeshes - + Select non-manifold meshes Select non-manifold meshes - + Selects all non-manifold meshes from the document or from the selected groups Selects all non-manifold meshes from the document or from the selected groups @@ -1087,12 +1462,12 @@ Arch_Site - + Site Site - + Creates a site object including selected objects. Creates a site object including selected objects. @@ -1100,17 +1475,17 @@ Arch_Space - + Space Space - + Creates a space object from selected boundary objects Creates a space object from selected boundary objects - + Creates a stairs object Creates a stairs object @@ -1118,12 +1493,12 @@ Arch_SplitMesh - + Split Mesh Split Mesh - + Splits selected meshes into independent components Splits selected meshes into independent components @@ -1131,7 +1506,7 @@ Arch_Stairs - + Stairs Schodiště @@ -1139,12 +1514,12 @@ Arch_Structure - + Structure Struktura - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) @@ -1152,25 +1527,38 @@ Arch_Survey - + Survey Survey - + Starts survey Starts survey + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Toggle IFC Brep flag + + + + Force an object to be exported as Brep or not + Force an object to be exported as Brep or not + + Arch_Wall - + Wall Zeď - + Creates a wall object from scratch or from a selected object (wire, face or solid) Creates a wall object from scratch or from a selected object (wire, face or solid) @@ -1178,12 +1566,12 @@ Arch_Window - + Window Okno - + Creates a window object from a selected object (wire, rectangle or sketch) Creates a window object from a selected object (wire, rectangle or sketch) @@ -1210,16 +1598,6 @@ IFC import Import formátu IFC - - - Creates groups for each Arch object type - Vytvoří skupinu pro všechny objekty typu Stavba - - - - Group components by types - Seskupit komponenty podle typů - 2D rendering @@ -1246,29 +1624,29 @@ Specifies how many times the viewed line thickness must be applied to cut lines - + Width: Šířka: - + Height: Výška: - + Color: - Color: + Barva: - + Length: Délka: Diameter - Diameter + Průměr @@ -1303,12 +1681,12 @@ Glass color: - Glass color: + Barva skla: Snapping - Snapping + Přichycení @@ -1375,11 +1753,6 @@ Cut method Cut method - - - Import / export - Import / export - Check this to display debug messages while importing IFC files @@ -1392,74 +1765,44 @@ - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - - - - Force python parser - Force python parser - - - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - + Separate openings Separate openings - + If this is checked, object names will be prefixed with the IFC ID number If this is checked, object names will be prefixed with the IFC ID number - + Prefix names with ID number Prefix names with ID number - + Exclude list: Exclude list: - + A comma-separated list of Ifc entities to exclude from import A comma-separated list of Ifc entities to exclude from import - - Custom IFC schema (internal parser only) - Custom IFC schema (internal parser only) - - - + IFC export IFC export - + Scaling factor Scaling factor - - - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - - - - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - - - - Save a list of exported objects - Save a list of exported objects - Snap to baselines of Arch objects (override with CTRL) @@ -1468,15 +1811,15 @@ Defaults - Defaults + Výchozí hodnoty Walls - Walls + Zdi - + mm mm @@ -1488,7 +1831,7 @@ Rebars - Rebars + Výztuže @@ -1501,97 +1844,105 @@ Průhlednost: - - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - - - - Separate placements - Separate placements - - - - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - - - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. - - Force export as Breps - Force export as Breps - - - - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - - - - Join multi-solid objects - Join multi-solid objects - - - + Collada export Collada export - - WebGL export - WebGL export + + Hidden geomety pattern + Hidden geomety pattern - - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + This is the SVG stroke-dasharray property to apply to projections of hidden objects. - - Discretize wires - Discretize wires + + 30, 10 + 30, 10 + + + + Stairs + Schodiště + + + + Number of steps: + Number of steps: + + + + Panels + Panels + + + + mm + mm + + + + Thickness + Tloušťka + + + + IFC / DAE / WebGL + IFC / DAE / WebGL + + + + Force export as Brep + Force export as Brep + + + + Workbench + + + Arch tools + Arch tools + + + + Draft tools + Draft tools + + + + Draft mod tools + Draft mod tools arch - - Arch tools - Nástroje staveb - - - - Draft tools - Draft tools - - - - Draft mod tools - Draft mod tools - - - + &Architecture Stavby - + &Draft &Draft - + Utilities Nástroje - + Snapping - Snapping + Přichycení diff --git a/src/Mod/Arch/Resources/translations/Arch_de.qm b/src/Mod/Arch/Resources/translations/Arch_de.qm index 25ff129a19..3e49ae842e 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_de.qm and b/src/Mod/Arch/Resources/translations/Arch_de.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_de.ts b/src/Mod/Arch/Resources/translations/Arch_de.ts index 5157ec6e6e..a8f2631558 100644 --- a/src/Mod/Arch/Resources/translations/Arch_de.ts +++ b/src/Mod/Arch/Resources/translations/Arch_de.ts @@ -1,726 +1,1572 @@ - + Arch - + Components - Komponenten + Komponenten - + Components of this object - Komponenten dieses Objektes + Komponenten dieses Objektes - + Axes - Achsen + Achsen - + Create Axis - Achse erzeugen + Achse erzeugen - + The intervals between axes - Die Intervalle zwischen den Achsen + Die Intervalle zwischen den Achsen - + The angles of each axis - Die Winkel der einzelnen Achsen + Die Winkel jeder Achse - + The length of the axes - Die Länge der Achsen + Die Länge der Achsen - + The size of the axis bubbles - Die Größe der Achsen-Blasen + Die Größe der Achsen-Blasen - - The numeration style - Der Aufzählungsstil - - - + Remove - Entfernen + Entfernen - + Add - Hinzufügen + Hinzufügen - - Distances and angles between axes - Abstände und Winkel zwischen Achsen - - - + Axis - Achse + Achse - + Distance - Abstand + Abstand - + Angle - Winkel + Winkel - - Building - Gebäude - - - + Type conversion - Typumwandlung + Typumwandlung - + Create Building - Gebäude erzeugen - - - - Floor - Boden - - - - removing sketch support to avoid cross-referencing - Entfernen der unterstützenden Skizze um Querverweise zu vermeiden - - - - No objects are cut by the plane - Die Ebene schneidet keine Objekte - - - - is not closed - ist nicht geschlossen - - - - is not valid - ist nicht gültig - - - - doesn't contain any solid - enhält keinen Volumenkörper - - - - contains a non-closed solid - enthält einen nicht geschlossenen Volumenkörper - - - - contains faces that are not part of any solid - enthält Flächen die nicht Teil eines Festkörpers sind - - - - Grouping - Gruppierung - - - - Ungrouping - Aufheben der Gruppierung - - - - Split Mesh - Netz zerlegen - - - - Mesh to Shape - Vernetze zur Form - - - - All good! no problems found - Alles gut! Keine Probleme gefunden - - - - Base component - Basiskomponente - - - - Additions - Ergänzungen - - - - Subtractions - Subtraktionen - - - - Objects - Objekte - - - - closing Sketch edit - Schließe Skizzenbearbeitung + Gebäude erzeugen + Floor + Boden + + + + removing sketch support to avoid cross-referencing + Entfernen der unterstützenden Skizze um Querverweise zu vermeiden + + + + is not closed + ist nicht geschlossen + + + + is not valid + ist ungültig + + + + doesn't contain any solid + Enthält keinen Volumenkörper + + + + contains a non-closed solid + Enthält einen nicht geschlossenen Volumenkörper + + + + contains faces that are not part of any solid + Enthält Flächen, die nicht Teil eines Volumenkörpers sind + + + + Grouping + Gruppierung + + + + Ungrouping + Aufheben der Gruppierung + + + + Split Mesh + Netz zerlegen + + + + Mesh to Shape + Wandelt Netz in Form um + + + + All good! no problems found + Alles gut! Keine Probleme gefunden + + + + Base component + Basiskomponente + + + + Additions + Ergänzungen + + + + Subtractions + Subtraktionen + + + + Objects + Objekte + + + + closing Sketch edit + Schließe Skizzenbearbeitung + + + The height of this floor - Die Höhe dieser Etage + Die Höhe dieser Etage - + Roof - Dach + Dach - + Create Roof - Dach erzeugen + Dach erzeugen - + Unable to create a roof - Konnte Dach nicht erstellen + Konnte kein Dach erstellen - - No object selected - Kein Objekt ausgewählt - - - - The angle of this roof - Der Winkel des dieses Daches - - - + The face number of the base object used to build this roof - Nummer der Oberfläche auf dem Objekt, aus dem das Dach erzeugt werden soll + Nummer der Oberfläche auf dem Objekt, aus dem das Dach erzeugt werden soll - + Page - Seite + Seite - + View of - Ansicht von + Ansicht von - + Create Section Plane - Schnittebene erzeugen + Schnittebene erzeugen - + The objects that must be considered by this section plane. Empty means all document - Die Objekte, die von dieser Schnittebene berücksichtigt werden müssen. Leer bedeutet das ganze Dokument + Die Objekte, die von dieser Schnittebene berücksichtigt werden müssen. Leer bedeutet das ganze Dokument - - The display size of this section plane - Die Displaygröße dieser Schnittebene - - - - No shape has been computed yet, select wireframe rendering and render again - Es wurde noch eine Form berechnet, wählen Sie Dratgitter Rendering aus rendern Sie erneut - - - + Skipping invalid object: - Überspringe ungültiges Objekt: + Überspringe ungültiges Objekt: - - Site - Seite - - - + Create Site - Seite erstellen + Seite erstellen - - Structure - Struktur - - - + Create Structure - Struktur erzeugen + Struktur erzeugen - + The length of this element, if not based on a profile - Die Länge dieses Elements, wenn es nicht auf einem Profil basiert + Die Länge dieses Elements, wenn es nicht auf einem Profil basiert - + The width of this element, if not based on a profile - Die Breite dieses Elements, wenn es nicht auf einem Profil basiert + Die Breite dieses Elements, wenn es nicht auf einem Profil basiert - + The height or extrusion depth of this element. Keep 0 for automatic - Höhe oder Extrusionstiefe dieses Elements (0 für automatisch) + Höhe oder Extrusionstiefe dieses Elements (0 für automatisch) - + Axes systems this structure is built on - Achsensysteme, auf denen diese Struktur basiert + Achsensysteme, auf denen diese Struktur basiert - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - Richtung der Normalen-Extrusion dieses Objekts ((0,0,0) für automatisch) + Richtung der Normalen-Extrusion dieses Objekts ((0,0,0) für automatisch) - + The element numbers to exclude when this structure is based on axes - Die Element-Nummern ausschließen, wenn diese Struktur auf Achsen basiert + Die Element-Nummern ausschließen, wenn diese Struktur auf Achsen basiert - - Couldn't compute the wall shape - Die Wand-Form konnte nicht berechnet werden - - - - Wall - Wand - - - + Create Wall - Wand erzeugen + Wand erzeugen - + WallTrace - WallTrace + WallTrace - + Wall options - Wandoptionen + Optionen Wand - + Width - Breite + Breite - + Height - Höhe + Höhe - + Alignment - Ausrichtung - - - - Continue - Fortsetzen - - - - The width of this wall. Not used if this wall is based on a face - Die Breite der Wand. Nicht benutzt wenn die Wand auf einer Fläche basiert - - - - The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - Höhe dieser Mauer (0 für automatisch). Wird nicht verwendet, wenn die Wand auf einem Volumenkörper basiert - - - - The alignment of this wall on its base object, if applicable - Die Ausrichtung dieser Mauer auf ihrem Basisobjekt, falls zutreffend - - - - If True, if this wall is based on a face, it will use its border wire as trace, and disconsider the face. - Wenn diese Wand auf ein Face basiert, wird seine Drahtgrenze als Spur verwendet und Face nicht verwendet. - - - - Error: Invalid base object - Fehler: Ungültiges Basisobjekt + Ausrichtung + The width of this wall. Not used if this wall is based on a face + Die Breite der Wand. Nicht benutzt wenn die Wand auf einer Fläche basiert + + + + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid + Höhe dieser Wand (0 für automatisch). Wird nicht verwendet, wenn die Wand auf einem Volumenkörper basiert + + + + The alignment of this wall on its base object, if applicable + Die Ausrichtung dieser Wand auf ihrem Basisobjekt, falls zutreffend + + + + Error: Invalid base object + Fehler: Ungültiges Basisobjekt + + + This mesh is an invalid solid - Dieses Polygonnetz ist eine ungültiger Festkörper + Dieses Polygonnetz ist ein ungültiger Volumenkörper - - Error removing splitter from wall shape - Fehler beim Entfernen von Splitter aus Wand Form - - - - Window - Fenster - - - + Create Window - Fenster erzeugen + Fenster erzeugen - + the components of this window - die Komponenten dieses Fensters + Die Komponenten dieses Fensters - - Unable to create component - Konnte Komponente nicht erstellen - - - + Edit - Bearbeiten + Bearbeiten - + Create/update component - Erstelle / aktualisiere Komponente + Erstelle / aktualisiere Komponente - + Base 2D object - 2D Basisobjekt + 2D Basisobjekt - + Wires - Drähte + Drähte - + Create new component - Neue Komponente erstellen + Neue Komponente erstellen - + Name - Name + Name - + Type - Typ + Typ - + Thickness - Dicke + Dicke - + Z offset - Z-Abstand + Z-Abstand - - pycollada not found, no collada support. - - pycollada nicht gefunden, kein collada Support - - - + Error: Couldn't determine character encoding - Fehler: Konnte Zeichencodierung nicht bestimmen + Fehler: Konnte Zeichencodierung nicht bestimmen - + file %s successfully created. - Datei %s erfolgreich erstellt. + Datei %s erfolgreich erzeugt. - + Error: Couldn't determine character encoding - Fehler: Konnte Zeichencodierung nicht bestimmen + Fehler: Konnte Zeichencodierung nicht bestimmen - + Couldn't locate IfcOpenShell - IfcOpenShell konnte nicht gefunden werden + IfcOpenShell konnte nicht gefunden werden - + IFC Schema not found, IFC import disabled. - IFC Schema nicht gefunden, IFC importieren deaktiviert + IFC Schema nicht gefunden, IFC importieren deaktiviert - + successfully written - erfolgreich geschrieben + Erfolgreich geschrieben + + + + The numbering style + Das Nummerierungsformat + + + + removing sketch external references to avoid cross-referencing + Entfernen von externen Referenzen um Kreuz-Referenzierungen zu vermeiden + + + + Add space boundary + Hinzufügen von Raum-Grenzen + + + + Remove space boundary + Raum-Grenzen entfernen + + + + Please select a base object + Bitte wählen Sie ein Basisobjekt + + + + Fixtures + Armaturen + + + + Armatures + Einbauteile + + + + The placement of this group + Die Platzierung dieser Gruppe + + + + Frame + Rahmen + + + + Create Frame + Rahmen erstellen + + + + Create Rebar + Bewehrung erstellen + + + + Please select a base face on a structural object + + Bitte eine Basisfläche auf einem Strukturelement auswählen + + + + + Please select a base object + + Bitte wählen Sie ein Basisobjekt + + + + + The placement of this object + Die Platzierung dieses Objekts + + + + The terrain of this site + Das Gelände dieses Grundstücks + + + + The address of this site + Die Adresse dieses Grundstücks + + + + The geographic coordinates of this site + Die geographischen Koordinaten dieses Grundstückes + + + + An url that shows this site in a mapping website + Eine Url, zu einer Website, die dieses Grundstück referenziert + + + + Create Space + Raum erzeugen + + + + The objects that make the boundaries of this space object + Die Objekte, die die Grenzen für dieses Objekt definieren + + + + Create Stairs + Treppe erstellen + + + + The length of these stairs, if no baseline is defined + Die Länge dieser Treppe, wenn keine Grundlinie definiert ist + + + + The width of these stairs + Die Breite dieser Treppe + + + + The total height of these stairs + Die Gesamthöhe dieser Treppe + + + + The alignment of these stairs on their baseline, if applicable + Die Ausrichtung dieser Treppe an der Grundlinie, falls anwendbar + + + + The number of risers in these stairs + Die Anzahl der Stufen auf dieser Treppe + + + + The depth of the treads of these stairs + Die Tiefe der Treppenstufen (Trittstufe) + + + + The height of the risers of these stairs + Die Höhe der Treppenstufen (Setzstufe) + + + + The size of the nosing + Die Grösse der Nase (Überstand) + + + + The thickness of the treads + Die Dicke der Auftritte + + + + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in + Das Schrittmaß, muss zwischen 62 und 64cm liegen + + + + The type of landings of these stairs + Die Art des Treppenabsatzes dieser Treppe + + + + The type of winders in these stairs + Die Art der Treppenwindung der Treppe + + + + The type of structure of these stairs + Der Typ des Treppenlaufs der Treppe + + + + The thickness of the massive structure or of the stringers + Die Dicke des Treppenlaufs oder der Treppenwange + + + + The width of the stringers + Die Breite der Treppenwange + + + + The offset between the border of the stairs and the structure + Der Versatz zwischen Treppenrand und Treppenwange + + + + Wood + Holz + + + + Steel + Stahl + + + + Structure options + Optionen Struktur + + + + Preset + Voreinstellung + + + + Length + Länge + + + + Rotate + Drehen + + + + Con&tinue + For&tfahren + + + + An optional extrusion path for this element + Ein optionaler Extrusionspfad für dieses Objekt + + + + Armatures contained in this element + In diesem Bauteil enthaltene Einbauteile + + + + The structural nodes of this element + Die strukturellen Knoten dieses Elements + + + + Error: The base shape couldn't be extruded along this tool object + Fehler: Die Basisform konnte nicht entlang des Hilfsobjektes extrudiert werden + + + + Couldn't compute a shape + Form konnte nicht berechnet werden + + + + Merge Wall + Wand zusammenfügen + + + + The selected wall contain no subwall to merge + Die ausgewählte Wand enthält keine darunterliegende Wand zum Zusammenführen + + + + Please select only wall objects + Bitte wählen Sie nur Wand Objekte + + + + Merge Walls + Wände zusammenfügen + + + + The length of this wall. Not used if this wall is based on an underlying object + Die Länge dieser Wand. Wird nicht verwendet, wenn diese Wand auf einem darunterliegenden Objekt basiert + + + + The face number of the base object used to build this wall + Die Anzahl der Oberflächen welche das Basisobjekt verwendet, um diese Mauer zu erstellen + + + + The offset between this wall and its baseline (only for left and right alignments) + Der Versatz zwischen Wand und Grundlinie (nur für linke und rechte Ausrichtungen) + + + + Pick a face on an existing object or select a preset + + Wählen Sie die Oberfläche eines vorhandenen Objekt oder wählen Sie eine Vorgabe + + + + Window options + Optionen Fenster + + + + The depth of the hole that this window makes in its host object. Keep 0 for automatic. + Die Tiefe der Öffnung, die dieses Fenster im Grundobjekt erzeugt. Behalten Sie 0 für Automatik. + + + + The width of this window (for preset windows only) + Die Breite des Fensters (Nur für Fenster aus Vorlagen) + + + + The height of this window (for preset windows only) + Die Höhe des Fensters (Nur für Fenster aus Vorlagen) + + + + The normal direction of this window + Die normale Ausrichtung dieses Fensters + + + + Unable to create component + + Konnte Komponente nicht erstellen + + + + + pycollada not found, collada support is disabled. + + Pycollada nicht gefunden, die Collada-Unterstützung wurde deaktiviert. + + + + + IfcOpenShell not found or disabled, falling back on internal parser. + + IfcOpenShell nicht verfügbar oder deaktiviert, Rückgriff auf internen Parser. + + + + Distances (mm) and angles (deg) between axes + Abstand (mm) und Winkel (deg) zwischen den Achsen + + + + Error computing the shape of this object + Fehler, die Form des Objektes konnte nicht ermittelt werden + + + + Create Structural System + Erstelle ein Strukturelles System + + + + Error: IfcOpenShell is not installed + + Fehler: IfcOpenShell ist nicht installiert. + + + + Error: your IfcOpenShell version is too old + + Fehler: Ihre IfcOpenShell-Version ist veraltet + + + + + Found a shape containing curves, triangulating + + Shape mit Kurven gefunden, Triangulierung (Zerteilung in Geraden) + + + + + Invalid cutplane + + Ungültige Schnittebene + + + + No objects are cut by the plane + + Die Ebene schneidet keine Objekte + + + + + Object doesn't have settable IFC Attributes + Objekt hat keine festlegbaren IFC Attribute + + + + Disabling Brep force flag of object + Deaktiviere erzwungene Darstellung durch Begrenzungsflächen für dieses Objekt + + + + Enabling Brep force flag of object + Aktiviere erzwungene Darstellung durch Begrenzungsflächen für dieses Objekt + + + + The base object this component is built upon + Das Basisobjekt, auf dem diese Komponente aufbaut + + + + Other shapes that are appended to this object + Andere Formen, die an dieses Objekt angehängt werden + + + + Other shapes that are subtracted from this object + Andere Formen, die von diesem Objekt abgezogen werden + + + + An optional description for this component + Eine optionale Beschreibung für diese Komponente + + + + An optional tag for this component + Ein optionales Tag für diese Komponente + + + + Custom IFC properties and attributes + Benutzerdefinierte IFC Eigenschaften und Attribute + + + + A material for this object + Ein Material für dieses Objekt + + + + The role of this object + Die Rolle dieses Objekts + + + + Specifies if this object must move together when its host is moved + Gibt an, ob dieses Objekt gemeinsam bewegt werden muss, wenn das Grundobjekt verschoben wird + + + + has no solid + enthält keinen Volumenkörper + + + + has an invalid shape + hat eine ungültige Form + + + + has a null shape + hat eine ungültige Form + + + + Cutting + Schneiden + + + + You must select a base object first! + Sie müssen zunächst ein Basisobjekt auswählen! + + + + Create Equipment + Erstellt Equipment + + + + You must select exactly one base object + Sie dürfen nur ein Basisobjekt auswählen + + + + The selected object must be a mesh + Das ausgewählte Objekt muss ein Mesh sein + + + + This mesh has more than 1000 facets. + Dieses Mesh hat mehr als 1000 Flächen. + + + + This operation can take a long time. Proceed? + Dieser Vorgang kann lange andauern. Fortfahren? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + Dieses Mesh hat mehr als 500 Facetten. Der Vorgang dauert ein paar Minuten... + + + + Create 3 views + 3 Ansichten erstellen + + + + an optional 2D shape representing a top view of this equipment + eine optionale 2D Form welche die Draufsicht des Equipments darstellt + + + + an optional 2D shape representing a front view of this equipment + eine optionale 2D Form welche die Vorderansicht des Equipments darstellt + + + + an optional 2D shape representing a side view of this equipment + eine optionale 2D Form welche die Seitenansicht des Equipments darstellt + + + + The model description of this equipment + Das darstellende Model für dieses Equipment + + + + The url of the product page of this equipment + Die Internetadresse zur Produktwebseite dieses Equipments + + + + Create Panel + Erzeuge Paneel + + + + Panel options + Paneel Optionen + + + + The thickness or extrusion depth of this element + Die Dicke oder Extrusions-Tiefe dieses Elements + + + + The number of sheets to use + Die Anzahl der zu verwendenden Platten + + + + The offset between this panel and its baseline + Der Versatz zwischen diesem Panel und der Basislinie + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Parameter des Dachprofils: +* Angle: Anstieg in Grad relativ zur Horizontalen +* Run: Distanz zwischen Wand und dem Grat +* Thickness: Dicke der Dachseite +* Overhang: Überstand des Daches relativ zur Wand +* Height: Höhe des Grates (automatisch berechnet) +* IdRel: relative Id für automatische Berechungen +--- +Wenn Angle = 0 und Run = 0 ist das Profil identisch dem relativen Profil +Wenn Angle = 0 wird der Winkel so berechnet, das die Höhe identisch zum relativen Profil ist +Wenn Run = 0 wird Run so berechnet, das die Höhe identisch zum relativen Profil ist + + + + Id + ID + + + + IdRel + IdRel + + + + If false, non-solids will be cut too, with possible wrong results. + Wenn false, dann werden nicht-Volumenkörper trotz möglicher falscher Resultate ebenfalls geschnitten. + + + + The display length of this section plane + Die Anzeigelänge dieser Schnittebene + + + + The display height of this section plane + Die Anzeigehöhe dieser Schnittebene + + + + The size of the arrows of this section plane + Die Größe der Pfeile dieser Schnittebene + + + + The computed floor area of this space + Berechnete Bodenfläche dieses Raumes + + + + The finishing of the floor of this space + Die Endbearbeitung des Bodens dieses Raumes + + + + The finishing of the walls of this space + Die Endbearbeitung der Wände dieses Raumes + + + + The finishing of the ceiling of this space + Die Endbearbeitung der Decke dieses Raumes + + + + Objects that are included inside this space, such as furniture + Objekte die sich im Raum befinden, wie z.B. Möbel + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + Der anzuzeigende Text. Nutze $area, $label, $tag, $floor, $walls, $ceiling um die jeweiligen Daten einzufügen + + + + The name of the font + Der Name der Schriftart + + + + The color of the area text + Die Farbe des Text Bereichs + + + + The size of the text font + Die Grösse der Schriftart + + + + The size of the first line of text + Höhe der ersten Textzeile + + + + The space between the lines of text + Der Abstand zwischen den Textzeilen + + + + The position of the text. Leave (0,0,0) for automatic position + Position des Textes. Für automatische Position auf (0,0,0) belassen + + + + The justification of the text + Die Ausrichtung des Textes + + + + The number of decimals to use for calculated texts + Nummer der Dezimalstellen für berechneten Text + + + + Show the unit suffix + Zeige Einheiten Suffix + + + + A description of the standard profile this element is based upon + Beschreibung des Standard Profils auf welchem diese Element basiert + + + + Sill height + Brüstungshöhe + + + + CutVolume + SchnittVolumenkörper + + + + CutPlane + SchnittEbene + + + + PreviewCutVolume + Vorschau Subtractionsvolumen + + + + Cut Plane + Schnittebene + + + + Cut Plane options + Schnittebenen Optionen + + + + Wich side to cut + Welche Seite schneiden + + + + Behind + Hinter + + + + Front + Vorne + + + + Crossing point not found in profile. + + Kreuzungs-Punkt im Profil nicht gefunden. + + + + A list of angles for each roof pane + Eine Liste der Winkel für jede Dach Ebene + + + + A list of horizontal length projections for each roof pane + Eine Liste der horizontalen Längen Projektionen für jede Dach Ebene + + + + A list of IDs of relative profiles for each roof pane + Eine Liste mit IDs von relativen Profilen für jede Dach Ebene + + + + A list of thicknesses for each roof pane + Eine Liste der Stärken für jede Dach Ebene + + + + A list of overhangs for each roof pane + Eine Liste der Überhänge für jede Dach Ebene + + + + A list of calculated heights for each roof pane + Eine Liste der berechneten Höhen für jede Dach Ebene + + + + Angle (deg) + Winkel (Grad) + + + + Run (mm) + Ausführen (mm) + + + + Thickness (mm) + Dicke (mm) + + + + Overhang (mm) + Überhang (mm) + + + + Height (mm) + Höhe (mm) + + + + Arch_3Views + + + 3 views from mesh + 3 Ansichten aus Mesh + + + + Creates 3 views (top, front, side) from a mesh-based object + Erstellt von 3 Ansichten (Oben, Vorne, Seite) aus einem Gitter basierten Objekt Arch_Add - + Add component - Teil hinzufügen + Komponente hinzufügen - + Adds the selected components to the active object - Fügt ausgewählte Komponenten zu den aktiven Objekten hinzu + Fügt ausgewählte Komponenten zu den aktiven Objekten hinzu Arch_Axis - + Axis - Achse + Achse - + Creates an axis system. - Erzeugt ein Achsensystem. + Erzeugt ein Achsensystem. Arch_Building - + Building - Gebäude + Gebäude - + Creates a building object including selected objects. - Erzeugt ein Gebäudeobjekt, einschließlich der ausgewählten Objekte. - - - - Arch_Cell - - - Cell - Zelle - - - - Creates a cell object including selected objects - Erzeugt ein Zellenobjekt, einschließlich der ausgewählten Objekte + Erzeugt ein Gebäudeobjekt, einschließlich der ausgewählten Objekte. Arch_Check - + Check - Überprüfung + Überprüfung - + Checks the selected objects for problems - Überprüft die ausgewählten Objekte auf Probleme + Überprüft die ausgewählten Objekte auf Probleme + + + + Explore the contents of an Ifc file + Den Inhalt von Ifc-Dateien untersuchen Arch_CloseHoles - + Close holes - Schließt Löcher + Schließt Löcher - + Closes holes in open shapes, turning them solids - Schließt Löcher in Formen und wandelt sie um in Volumenkörper + Schließt Löcher in Formen und wandelt sie um in Volumenkörper + + + + Arch_CutPlane + + + Cut with plane + Schneiden in einer Ebene + + + + Cut an object with a plane + Schneiden eines Objekts in einer Ebene + + + + Arch_Equipment + + + Equipment + Ausstattung + + + + Creates an equipment object from a selected object (Part or Mesh) + Erstellt ein Equipment vom ausgewählten Objekt (Part oder Mesh) Arch_Floor - + Floor - Boden + Boden - + Creates a floor object including selected objects - Erstellt ein Boden-Objekt, einschließlich der ausgewählten Objekte + Erstellt ein Boden-Objekt, einschließlich der ausgewählten Objekte + + + + Arch_Frame + + + Frame + Rahmen + + + + Creates a frame object from a planar 2D object and a profile + Erzeugt ein Rahmenbauteil von einem 2D-Objekt oder einem Profil + + + + Arch_IfcExplorer + + + Ifc Explorer + Ifc Explorer + + + + Arch_MergeWalls + + + Merge Walls + Wände zusammenfügen + + + + Merges the selected walls, if possible + Führt die ausgewählten Wände zusammen, wenn möglich Arch_MeshToShape - + Mesh to Shape - Vernetze zur Form + Wandelt Netz in Form um - + Turns selected meshes into Part Shape objects - wandelt gewählte meshes in Part Shape Objekte um + Wandelt gewählte Meshes in Part Shape Objekte um + + + + Arch_Panel + + + Panel + Paneel + + + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Erstellt leeres Paneel Objekt, leer oder auf Basis eines ausgewählten Objekts (Skizze, Kantenzug, Fläche oder Volumenkörper) + + + + Arch_Rebar + + + Rebar + Bewehrung + + + + Creates a Reinforcement bar from the selected face of a structural object + Erzeugt eine Bewehrungsverlegung basierend auf der markierten Fläche eines Strukturobjektes Arch_Remove - + Remove component - Komponente entfernen + Komponente entfernen - + Remove the selected components from their parents, or create a hole in a component - Entferne die ausgewählten Komponenten von ihrem Elternobjekt, oder erstelle ein Loch in einer Komponente + Entferne die ausgewählten Komponenten von ihrem Elternobjekt, oder erstelle ein Loch in einer Komponente Arch_RemoveShape - + Remove Shape from Arch - Entfernt Formen aus Architektur + Entfernt Formen aus Architektur - + Removes cubic shapes from Arch components - Entfernt kubische Formen von Architektur-Komponenten + Entfernt kubische Formen von Architektur-Komponenten Arch_Roof - + Roof - Dach + Dach - - Creates a roof object from the selected face of an object - Erzeugt ein Dachobject aus der selektierten Fläche eines Objekts + + Creates a roof object from the selected wire. + Erstellt ein Dach-Objekt aus dem gewählten Kantenzug. Arch_SectionPlane - + Section Plane - Schnittebene + Schnittebene - + Creates a section plane object, including the selected objects - Erstellt ein flaches Objekt, einschließlich der ausgewählten Objekte + Erstellt ein flaches Objekt, einschließlich der ausgewählten Objekte Arch_SelectNonSolidMeshes - + Select non-manifold meshes - Wähle nicht-mehrfach Netze + Wähle nicht-mehrfache Polygonnetze - + Selects all non-manifold meshes from the document or from the selected groups - Wählt alle nicht-mehrfach Netze aus Dokument oder aus ausgewählter Gruppe + Wählt alle nichtmannigfaltign Polygonnetze aus dem Dokument oder aus der ausgewählten Gruppe Arch_Site - + Site - Seite + Grundstück - + Creates a site object including selected objects. - Ein Nebenobjekt inklusive der ausgewählten Objekte erstellen. + Ein Nebenobjekt inklusive der ausgewählten Objekte erstellen. + + + + Arch_Space + + + Space + Raum + + + + Creates a space object from selected boundary objects + Erstellt ein Raum-Objekt aus ausgewählten Begrenzungsobjekten + + + + Creates a stairs object + Erstellt ein Treppen-Objekt Arch_SplitMesh - + Split Mesh - Netz zerlegen + Netz zerlegen - + Splits selected meshes into independent components - Zerlegt ausgewählte Netze in unabhängige Komponenten + Zerlegt ausgewählte Netze in unabhängige Komponenten + + + + Arch_Stairs + + + Stairs + Treppe Arch_Structure - + Structure - Struktur + Struktur - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) - Erzeugt ein Strukturobjekt von Grund auf neu oder von einem ausgewählten Objekt (Skizze,Draht,Oberfläche oder Volumenkörper) + Erzeugt ein neues Strukturobjekt oder erstellt es aus einem ausgewählten Objekt (Skizze, Draht, Oberfläche oder Volumenkörper) + + + + Arch_Survey + + + Survey + Messen + + + + Starts survey + Messen starten + + + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + IFC Brep Kennzeichen Umschalten + + + + Force an object to be exported as Brep or not + Erzwingen den Exports eines Objekts als Brep (oder nicht) Arch_Wall - + Wall - Wand + Wand - + Creates a wall object from scratch or from a selected object (wire, face or solid) - Erzeuge ein Wandobjekt von Grund auf neu oder von einem ausgewählten Objekt (Draht,Oberfläche oder Volumenkörper) + Erzeuge ein neues Wandobjekt oder erstellt es aus einem ausgewählten Objekt (Draht, Oberfläche oder Volumenkörper) Arch_Window - + Window - Fenster + Fenster - + Creates a window object from a selected object (wire, rectangle or sketch) - Erstellt ein Fensterobjekt von einem ausgewählten Objekt (Draht, Rechteck oder Skizze) + Erstellt ein Fensterobjekt von einem ausgewählten Objekt (Draht, Rechteck oder Skizze) @@ -728,141 +1574,368 @@ General settings - Allgemeine Einstellungen + Allgemeine Einstellungen + + + + This is the default color for new Wall objects + Dies ist die Standardfarbe für neue Wandobjekte + + + + This is the default color for new Structure objects + Dies ist die Standardfarbe für neue Strukturobjekte + + + + IFC import + IFC-Import + + + + 2D rendering + 2D Rendering + + + + Show debug information during 2D rendering + Debuginformationen während des 2D-Renderns anzeigen + + + + Show renderer debug messages + Renderer-Debug-Nachrichten anzeigen + + + + Cut areas line thickness ratio + Flächen Linien Dicke Verhältnis schneiden + + + + Specifies how many times the viewed line thickness must be applied to cut lines + Gibt an wie oft die Linienstärke angewendet werden muss um Linien zu durchtrennen + + + + Width: + Breite: + + + + Height: + Höhe: + + + + Color: + Farbe: + + + + Length: + Länge: + + + + Diameter + Durchmesser + + + + Offset + Versetzen + + + + The default width for new windows + Die Standardbreite für neue Fenster + + + + The default height for new windows + Die Standardhöhe für neue Fenster + + + + Thickness: + Dicke: + + + + The default thickness for new windows + Die Standarddicke für neue Fenster + + + + Frame color: + Rahmenfarbe: + + + + Glass color: + Glasfarbe: - General Arch Settings - Allgemeine Architektur-Einstellungen + Snapping + Objektfang - - Default color for walls - Standard Wandfarbe + + Walls drawing + Einstellungen für das Erzeugen von Wänden - - This is the default color for new Wall objects - Dies ist die Standardfarbe für neue Wandobjekte + + Auto-join walls + Wände automatisch verbinden - - Default color for structures - Standardfarbe für Strukturen + + If this is checked, when 2 similar walls are being connected, their underlying sketches will be joined into one, and the two walls will become one + Wenn aktiviert, dann wird versucht beim verbinden von ähnlichen Wänden die zugrunde liegenden Skizzen auch zu vereinigen. Die beiden Wände werden zu einer Wand - - This is the default color for new Structure objects - Dies ist die Standardfarbe für neue Strukturobjekte + + Join walls base sketches when possible + Vereinige die Basisskizzen von Wänden wenn möglich - - Default color for windows - Standardfarbe für Fenster + + Mesh to Shape Conversion + Netz zu Form umwandeln + + + + If this is checked, conversion is faster but the result might still contain triangulated faces + Wenn aktiviert, ist die Umwandlung schneller, aber das Ergebnis kann noch triangulierte Flächen enthalten + + + + Fast conversion + Schnelle Umwandlung + + + + Tolerance: + Toleranz: + + + + Tolerance value to use when checking if 2 adjacent faces as planar + Toleranz, die verwendet wird um zu prüfen, ob zwei angrenzende Flächen koplanar sind - IFC import - IFC-Import + If this is checked, flat groups of faces will be force-flattened, resulting in possible gaps and non-solid results + Wenn diese Option aktiviert ist wird die Planität von Flächen erzwungen, was zu Lücken und ungültigen Ergebnissen führen kann - - If this is checked, the IFCOpenShell importer will be used, allowing to import more IFC types - Wenn gesetzt, wird der IFCOpenShell Importer verwendet, der erlaubt weitere IFC zu importieren + + Force flat faces + Erzwinge plane Flächen - - Use IFCOpenShell if available - Verwende IFCOpenShell, falls vorhanden + + If this is checked, holes in faces will be performed by subtraction rather than using wires orientation + Falls aktiviert werden Löcher in Flächen durch Subtraction anstatt durch Umlaufsinn von Wires realisiert - - Creates groups for each Arch object type - Erzeuge Gruppen für jeden Arch-Objekttyp + + Cut method + Öffnungen durch Subtraktion - - Group components by types - Gruppiere Komponenten nach Typen + + Check this to display debug messages while importing IFC files + Hier aktivieren um Debugmeldungen während des Imports von IFC-Dateien anzuzeigen - - Import furniture (can make the model heavy) - Möbel importieren (kann das Modell schwergewichtig machen) + + Show debug messages + Debugmeldungen anzeigen - - 2D rendering - 2D Rendering + + If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted + Falls diese Option aktiviert ist, werden Öffnungen als Subtraktionen importiert, falls nicht werden Wände mit Öffnungen importiert - - Show debug information during 2D rendering - Debuginformationen während des 2D-Renderns anzeigen + + Separate openings + Separate Öffnungen - - Show renderer debug messages - Renderer-Debug-Nachrichten anzeigen + + If this is checked, object names will be prefixed with the IFC ID number + Hier aktivieren um den Objektnamen die Ifc-ID-Nummer voranzustellen - - Cut areas line thickness ratio - Flächen Linien Dicke Verhältnis schneiden + + Prefix names with ID number + Objektnamen mit Ifc-ID-Nummern - - Specifies how many times the viewed line thickness must be applied to cut lines - Gibt an wie oft die Linienstärke angewendet werden muss um Linien zu durchtrennen + + Exclude list: + Ausschluß-Liste: + + + + A comma-separated list of Ifc entities to exclude from import + Eine durch Kommas getrennte Liste von Ifc-Objekten, die beim Import ausgeschlossen werden + + + + IFC export + IFC-Export + + + + Scaling factor + Skalierungsfaktor + + + + Snap to baselines of Arch objects (override with CTRL) + Einrasten an Basislinien von Arch-Objekten (Überschreiben mit STRG) + + + + Defaults + Standardwerte + + + + Walls + Wände + + + + mm + mm + + + + Structures + Bauteil + + + + Rebars + Bewehrungen + + + + Windows + Fenster + + + + Transparency: + Transparenz: + + + + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. + Einige IFCViewer haben Probleme mit Extrusionen. Mit dieser Einstellung werden alle Objekte als BREP-Geometrie exportiert. + + + + Collada export + Collada-Export + + + + Hidden geomety pattern + Verstecktes Geometrie Muster + + + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + Dies ist die SVG stroke-dasharray (gestrichelte Linie) Eigenschaft welche auf die Projektionen verborgener Objekte angewendet wird. + + + + 30, 10 + 30, 10 + + + + Stairs + Treppe + + + + Number of steps: + Anzahl der Schritte: + + + + Panels + Paneele + + + + mm + mm + + + + Thickness + Dicke + + + + IFC / DAE / WebGL + IFC / DAE / WebGL + + + + Force export as Brep + Export als Brep erzwingen + + + + Workbench + + + Arch tools + Arch Werkzeuge + + + + Draft tools + Entwurf Werkzeuge + + + + Draft mod tools + Entwurf Modifikationswerkzeuge arch - - Arch tools - Bogenwerkzeuge - - - - Draft tools - Zeichenwerkzeuge - - - - Draft mod tools - Entwurf-Modifikationswerkzeuge - - - + &Architecture - &Architektur + &Architektur - - Conversion Tools - Konvertierungswerkzeuge - - - - Calculation Tools - Berechnungswerkzeuge - - - + &Draft - &Entwurf + &Entwurf - - Context Tools - Kontextwerkzeuge + + Utilities + Dienstprogramme - - pycollada not found, collada support will be disabled. - - Pycollada wurde nicht gefunden, Collada Unterstützung wird deaktiviert. + + Snapping + Objektfang diff --git a/src/Mod/Arch/Resources/translations/Arch_es-ES.qm b/src/Mod/Arch/Resources/translations/Arch_es-ES.qm index 857a5868c5..c392c816d3 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_es-ES.qm and b/src/Mod/Arch/Resources/translations/Arch_es-ES.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts index 2c7f7e9bf7..39e6271752 100644 --- a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts +++ b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts @@ -4,407 +4,362 @@ Arch - + Components Componentes - + Components of this object Componentes de este objeto - + Axes Ejes - + Create Axis Crear eje - + The intervals between axes Los intervalos entre ejes - + The angles of each axis Los ángulos de cada eje - + The length of the axes La longitud de los ejes - + The size of the axis bubbles El tamaño de los globos de eje - + Remove Quitar - + Add Añadir - + Axis Eje - + Distance Distancia - + Angle Ángulo - - Building - Construcción - - - + Type conversion Tipo de conversión - + Create Building Crear edificio - + Floor Suelo - + removing sketch support to avoid cross-referencing removiendo dibujo de soporte para evitar referencias cruzadas - - No objects are cut by the plane - No hay objetos cortados por el plano - - - + is not closed no está cerrada - + is not valid no es válido - + doesn't contain any solid no contiene ningún sólido - + contains a non-closed solid contiene un sólido no cerrado - + contains faces that are not part of any solid contiene caras que no son parte de ningún sólido - + Grouping Agrupación - + Ungrouping Desagrupar - + Split Mesh Dividir malla - + Mesh to Shape Malla a forma - + All good! no problems found ¡Todo bien! no se encontraron problemas - + Base component Componente de base - + Additions Agregados - + Subtractions Sustracciones - + Objects Objetos - + closing Sketch edit cerrando edición de Dibujo - + The height of this floor La altura de este piso - + Roof Techo - + Create Roof Crear techo - + Unable to create a roof No se puede crear un techo - - The angle of this roof - El ángulo de este techo - - - + The face number of the base object used to build this roof El número de la cara del objeto base utilizado para construir este techo - + Page Página - + View of Vista de - + Create Section Plane Crear el plano de sección - + The objects that must be considered by this section plane. Empty means all document Los objetos que deben ser considerados por este plano de sección. Vacío significa todos los documentos - - The display size of this section plane - El tamaño de pantalla de este plano de sección - - - - No shape has been computed yet, select wireframe rendering and render again - Ninguna forma ha sido calculada aún, seleccione visualización alámbrica y visualice de nuevo - - - + Skipping invalid object: Saltar objeto no válido: - - Site - Situación - - - + Create Site Crear sitio - - Structure - Estructura - - - + Create Structure Crear estructura - + The length of this element, if not based on a profile La longitud de este elemento, si no está basado en un perfil - + The width of this element, if not based on a profile La anchura de este elemento, si no está basado en un perfil - + The height or extrusion depth of this element. Keep 0 for automatic La altura o profundidad de extrusión de este elemento. Mantener 0 para automático - + Axes systems this structure is built on Los sistemas de ejes de esta estructura estan basados en - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Dirección de extrusión normal de este objeto (mantener (0,0,0) para automática normal) - + The element numbers to exclude when this structure is based on axes El número de elementos a excluir cuando esta estructura se base en ejes - - Wall - Muro - - - + Create Wall Crear muro - + WallTrace WallTrace - + Wall options Opciones de muro - + Width Ancho - + Height Altura - + Alignment Alineación - + The width of this wall. Not used if this wall is based on a face La anchura de esta pared. No utilizar si esta pared se basa en una cara - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid La altura de esta pared. Mantenga 0 para automático. No utilizar si esta pared está basada en un sólido - + The alignment of this wall on its base object, if applicable La alineación de este muro sobre su objeto base, si es aplicable - + Error: Invalid base object Error: Objeto base no válido - + This mesh is an invalid solid Esta malla es un sólido no válido - - Window - Ventana - - - + Create Window Crear la ventana - + the components of this window los componentes de esta ventana - + Edit Editar - + Create/update component Crear/actualizar componente - + Base 2D object Objeto base 2D - + Wires Alambres - + Create new component Crear nuevo componente - + Name Nombre - + Type Tipo - + Thickness Espesor - + Z offset Desplazamiento en eje z @@ -419,71 +374,66 @@ archivo %s creado correctamente. - + Error: Couldn't determine character encoding Error: No se pudo determinar la codificación de caracteres - + Couldn't locate IfcOpenShell No se pudo localizar IfcOpenShell - + IFC Schema not found, IFC import disabled. Esquema de IFC no encontrado, importar a IFC desabilitado. - + successfully written escrito exitosamente - + The numbering style El estilo de numeración - + removing sketch external references to avoid cross-referencing Remover las referencias externas del croquis para evitar cruce de referencias - - Invalid cutplane - Plano de corte no válido - - - + Add space boundary Añadir límite espacial - + Remove space boundary Remover límite espacial - + Please select a base object Por favor, seleccione un objeto base - + Fixtures Encuentros - + Armatures Armaduras - + The placement of this group La posición de este grupo @@ -493,169 +443,144 @@ Marco - + Create Frame Crear Marco - - Rebar - Ferralla - - - + Create Rebar Crear Ferralla - + Please select a base face on a structural object Por favor seleccione una cara base en un objeto estructural - + Please select a base object Por favor, seleccione un objeto base - - Section - Sección - - - + The placement of this object La posición de este objeto - + The terrain of this site El terreno de este sitio - + The address of this site La dirección de este sitio - + The geographic coordinates of this site Las coordenadas geográficas de este sitio - + An url that shows this site in a mapping website Una url que muestra este sitio en un sitio web de mapas - - Space - Espacio - - - + Create Space Crear Espacio - - A base shape defining this space - Una silueta base definiendo este espacio - - - + The objects that make the boundaries of this space object Los objetos que forman los límites de este objeto espacial - - Stairs - Escaleras - - - + Create Stairs Crear Escaleras - + The length of these stairs, if no baseline is defined La longitud de esta escalera, si no existe una linea base definida - + The width of these stairs La anchura de estas escaleras - + The total height of these stairs La altura total de estas escaleras - + The alignment of these stairs on their baseline, if applicable La alineación de esta escalera con su linea base, si es aplicable - + The number of risers in these stairs El numero de peldaños en esta escalera - + The depth of the treads of these stairs La profundidad de los peldaños en esta escalera - + The height of the risers of these stairs La altura de los peldaños en esta escalera - + The size of the nosing El tamaño del borde o proyectura del peldaño - + The thickness of the treads El espesor de los peldaños - + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in El ratio de Blondel debe estar entre 62 y 64 cm o entre 24,5 y 25,5 pulgadas - + The type of landings of these stairs El tipo de rellano de estas escaleras - + The type of winders in these stairs - The type of winders in these stairs + El tipo de tramo de las escaleras - + The type of structure of these stairs El tipo de estructura de estas escaleras - + The thickness of the massive structure or of the stringers El grosor de la estructura maciza o de las vigas - + The width of the stringers La anchura de las vigas - + The offset between the border of the stairs and the structure La distancia entre el borde de las escaleras y la estructura @@ -670,139 +595,124 @@ Acero - + Structure options Opciones de la estructura - + Preset Ajuste - + Length Longitud - + Rotate Girar - + Con&tinue Con&tinuar - + An optional extrusion path for this element Una ruta de extrusión opcional para este elemento - + Armatures contained in this element Armaduras contenidas en este elemento - - The role of this structural element - El papel de este elemento estructural - - - + The structural nodes of this element Los nodos estructurales de este elemento - + Error: The base shape couldn't be extruded along this tool object Error: La figura base no pudo ser extruída a lo largo del objeto guía - + Couldn't compute a shape No se pudo procesar una figura - + Merge Wall Unir Muro - + The selected wall contain no subwall to merge La pared seleccionada no contiene subparedes para combinar - + Please select only wall objects Por favor seleccione sólo objetos muro - + Merge Walls Unir Muros - + The length of this wall. Not used if this wall is based on an underlying object La longitud de esta pared. No se utiliza si la pared se basa en un objeto subyacente - + The face number of the base object used to build this wall El número de caras del objeto base utilizado para construir esta pared - + The offset between this wall and its baseline (only for left and right alignments) Separación entre esta pared y su linea de fondo (solo para alinear a derecha e izquierda) - + Pick a face on an existing object or select a preset Elige una cara en un objeto existente o seleccione por defecto - + Window options Opciones de ventana - + The depth of the hole that this window makes in its host object. Keep 0 for automatic. Profundidad del hueco de la ventana. Si el valor es 0 se calculará automáticamente. - - an optional volume to be subtracted from hosts of this window - volumen opcional a extraer del hueco de esta ventana - - - + The width of this window (for preset windows only) Ancho de la ventana (solo para ventanas predefinidas) - + The height of this window (for preset windows only) Altura de la ventana (solo para ventanas predefinidas) - + The normal direction of this window Dirección normal de la ventana - - The role of this window - El papel de esta ventana - - - + Unable to create component No se ha podido crear el componente @@ -816,46 +726,36 @@ - + IfcOpenShell not found or disabled, falling back on internal parser. No se encuentra o está deshabilitado IfcOpenShell, cambiando a parser interno. - + Distances (mm) and angles (deg) between axes Distancias (mm) y ángulos (grados) entre ejes - + Error computing the shape of this object Error al calcular la forma del objeto - - StructuralSystem - SistemaEstructural - - - + Create Structural System Crear sistema estructural - - The role of this wall - El papel de ésta pared - - - + Error: IfcOpenShell is not installed Error: IfcOpenShell no está instalado - + Error: your IfcOpenShell version is too old Error: la versión de IfcOpenShell está obsoleta @@ -868,16 +768,455 @@ Se ha encontrado una forma que contiene curvas, triangulando + + + Invalid cutplane + + Plano de corte no válido + + + + + No objects are cut by the plane + + No hay objetos cortados por el plano + + + + + Object doesn't have settable IFC Attributes + Objeto no tiene atributos configurables de IFC + + + + Disabling Brep force flag of object + Desactivar indicador de fuerza Brep del objeto + + + + Enabling Brep force flag of object + Activar indicador de fuerza Brep del objeto + + + + The base object this component is built upon + El objeto base en que este componente se basa + + + + Other shapes that are appended to this object + Otras formas que se anexan a este objeto + + + + Other shapes that are subtracted from this object + Otras formas que se sustraen de este objeto + + + + An optional description for this component + Una descripción opcional para este componente + + + + An optional tag for this component + Una etiqueta opcional para este componente + + + + Custom IFC properties and attributes + Atributos y propiedades personalizadas de IFC + + + + A material for this object + Un material para este objeto + + + + The role of this object + El papel de este objeto + + + + Specifies if this object must move together when its host is moved + Especifica si este objeto debe moverse cuando su anfitrión se mueve + + + + has no solid + No tiene ningún sólido + + + + has an invalid shape + tiene una forma no válida + + + + has a null shape + tiene una forma nula + + + + Cutting + Corte + + + + You must select a base object first! + ¡Primero debes seleccionar un objeto base! + + + + Create Equipment + Crear equipo + + + + You must select exactly one base object + Debes seleccionar exactamente un objeto base + + + + The selected object must be a mesh + El objeto seleccionado debe ser una malla + + + + This mesh has more than 1000 facets. + Esta malla tiene más de 1000 triángulos. + + + + This operation can take a long time. Proceed? + La operación puede tomar bastante tiempo ¿Desea continuar? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + La malla tiene más de 500 triángulos. Esto puede tardar unos minutos... + + + + Create 3 views + Crear 3 vistas + + + + an optional 2D shape representing a top view of this equipment + una forma 2D opcional que representa una vista superior de este equipo + + + + an optional 2D shape representing a front view of this equipment + una forma 2D opcional que representa una vista frontal de este equipo + + + + an optional 2D shape representing a side view of this equipment + una forma 2D opcional que representa una vista lateral de este equipo + + + + The model description of this equipment + La descripción del modelo de este equipo + + + + The url of the product page of this equipment + La dirección url de la página del producto de este equipo + + + + Create Panel + Crear Panel + + + + Panel options + Opciones del Panel + + + + The thickness or extrusion depth of this element + El espesor o profundidad de extrusión de este elemento + + + + The number of sheets to use + El número de hojas a usar + + + + The offset between this panel and its baseline + La separación entre este panel y su línea base + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Parametros de los perfiles del tejado: +*Angulo : pendiente en grados respecto a la horizontal. +*Distancia : distancia exterior entre la pared y el caballete del tejado. +*Espesor : grosor del lateral del tejado. +*Voladizo : distancia exterior entre el canalon y la pared. +* Altura : altura del caballete (calculado automáticamente) +*IdRel : Identificador relativo para cálculos automáticos. +--- +Si Angulo = 0 y Distancia = 0 entonces el perfil es identicoa al perfil relativo. +Si Angulo = 0 entonces el angulo es calculado de forma que la altura sea igual a la del perfil relativo. +Si Distancia = 0 entonces la distancia es calcula de forma que la altura sea igual a la del perfil relativo. + + + + Id + Identificación + + + + IdRel + IdRel + + + + If false, non-solids will be cut too, with possible wrong results. + Si está marcado como falso, se aplicará el corte a objetos no-sólidos, pudiendo producirse resultados erróneos. + + + + The display length of this section plane + La duración de visualización de este plano de sección + + + + The display height of this section plane + La altura de visualización de este plano de sección + + + + The size of the arrows of this section plane + El tamaño de las flechas de este plano de sección + + + + The computed floor area of this space + El área del suelo calculada para este espacio + + + + The finishing of the floor of this space + El acabado del suelo en este espacio + + + + The finishing of the walls of this space + El acabado de las paredes en este espacio + + + + The finishing of the ceiling of this space + El acabado del techo en este espacio + + + + Objects that are included inside this space, such as furniture + Objetos que estan dentro de estes espacio,como muebles + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + El texto a mostra.Utilizar $area, $label, $tag, $floor, $walls, $ceiling para insertar los datos correspondientes + + + + The name of the font + El nombre de la fuente + + + + The color of the area text + El color del área de texto + + + + The size of the text font + El tamaño de la fuente de texto + + + + The size of the first line of text + El tamaño de la primera linea de texto + + + + The space between the lines of text + El espacion entre las líneas de texto + + + + The position of the text. Leave (0,0,0) for automatic position + La posición del texto.Dejar(0,0,0) para posicion automática + + + + The justification of the text + La justificación del texto + + + + The number of decimals to use for calculated texts + El número de decimales usados para los textos calculados + + + + Show the unit suffix + Mostrar el sufijo de la unidad + + + + A description of the standard profile this element is based upon + Una descripcion del perfil estándar en el que este elemento se basa + + + + Sill height + Altura del travesaño + + + + CutVolume + Volumen de corte + + + + CutPlane + Plano de corte + + + + PreviewCutVolume + Previsualización del volumen de corte + + + + Cut Plane + Plano de corte + + + + Cut Plane options + Opciones del plano de corte + + + + Wich side to cut + Desde que lado cortar + + + + Behind + Desde atras + + + + Front + Alzado + + + + Crossing point not found in profile. + + Punto de corte no encontrado en el perfil. + + + + + A list of angles for each roof pane + Una lista de los angulos de cada panel del techo + + + + A list of horizontal length projections for each roof pane + Una lista de las longitudes de la proyeccion horizontal de cada panel del tejado + + + + A list of IDs of relative profiles for each roof pane + Una lista de identificadores de perfiles relativos para cada panel de techo + + + + A list of thicknesses for each roof pane + Una lista de espesores para cada panel de techo + + + + A list of overhangs for each roof pane + Una lista de voladizos para cada panel de techo + + + + A list of calculated heights for each roof pane + Una lista de las alturas calculadas para cada panel de techo + + + + Angle (deg) + Ángulo (grados) + + + + Run (mm) + Distancia (mm) + + + + Thickness (mm) + Espesor (mm) + + + + Overhang (mm) + Proyección (mm) + + + + Height (mm) + Altura (mm) + + + + Arch_3Views + + + 3 views from mesh + 3 vistas de la malla + + + + Creates 3 views (top, front, side) from a mesh-based object + Crea 3 vistas(planta,alzado,perfil) de un objeto basado en una malla + Arch_Add - + Add component Agregar componente - + Adds the selected components to the active object Añade los componentes seleccionados al objeto activo @@ -885,12 +1224,12 @@ Arch_Axis - + Axis Eje - + Creates an axis system. Crea un sistema de ejes. @@ -898,12 +1237,12 @@ Arch_Building - + Building Construcción - + Creates a building object including selected objects. Crea un objeto de construcción, incluyendo los objetos seleccionados. @@ -911,17 +1250,17 @@ Arch_Check - + Check Verifica - + Checks the selected objects for problems Verificar problemas de los objetos seleccionados - + Explore the contents of an Ifc file Explorar el contenido de un archivo Ifc @@ -929,18 +1268,41 @@ Arch_CloseHoles - + Close holes Cerrar orificios - + Closes holes in open shapes, turning them solids Cierra agujeros en formas abiertas, convirtiéndolas en sólidos - Arch_Fixture + Arch_CutPlane + + + Cut with plane + Corte con plano + + + + Cut an object with a plane + Cortar un objeto con un plano + + + + Arch_Equipment + + + Equipment + Equipamiento + + + + Creates an equipment object from a selected object (Part or Mesh) + Crea un objeto de equipamiento desde un objeto selecciona(Parte o Malla) + Arch_Floor @@ -958,12 +1320,12 @@ Arch_Frame - + Frame Marco - + Creates a frame object from a planar 2D object and a profile Crea un objeto alámbrico a partir de un objeto plano 2D y un perfil @@ -971,7 +1333,7 @@ Arch_IfcExplorer - + Ifc Explorer Ifc Explorer @@ -979,12 +1341,12 @@ Arch_MergeWalls - + Merge Walls Unir Muros - + Merges the selected walls, if possible Une las paredes seleccionadas si es posible @@ -992,25 +1354,38 @@ Arch_MeshToShape - + Mesh to Shape Malla a forma - + Turns selected meshes into Part Shape objects Convierte las mallas seleccionadas en convierte en objetos forma de pieza + + Arch_Panel + + + Panel + Panel + + + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Crea un objeto de estructura a partir de cero desde un objeto seleccionado(sketch,wire,cara o solido) + + Arch_Rebar - + Rebar Ferralla - + Creates a Reinforcement bar from the selected face of a structural object Crea una barra de refuerzo de la cara seleccionada de un objeto estructural @@ -1018,12 +1393,12 @@ Arch_Remove - + Remove component Eliminar componente - + Remove the selected components from their parents, or create a hole in a component Eliminar los componentes seleccionados de sus padres, o crear un agujero en un componente @@ -1031,12 +1406,12 @@ Arch_RemoveShape - + Remove Shape from Arch Eliminar forma de arco - + Removes cubic shapes from Arch components Quita formas cúbicas de componentes Arco @@ -1044,25 +1419,25 @@ Arch_Roof - + Roof Techo - - Creates a roof object from the selected face of an object - Crea un objeto techo desde la cara seleccionada de un objeto + + Creates a roof object from the selected wire. + Crea un objeto de tejado desde un alambre seleccionado. Arch_SectionPlane - + Section Plane Plano de sección - + Creates a section plane object, including the selected objects Crea una sección plana de un objeto, incluidos los objetos seleccionados @@ -1070,12 +1445,12 @@ Arch_SelectNonSolidMeshes - + Select non-manifold meshes Seleccionar mallas no-múltiples - + Selects all non-manifold meshes from the document or from the selected groups Selecciona todas las mallas no-múltiples del documento o de los grupos seleccionados @@ -1083,12 +1458,12 @@ Arch_Site - + Site Situación - + Creates a site object including selected objects. Crea un objeto de situación, incluyendo los objetos seleccionados. @@ -1096,17 +1471,17 @@ Arch_Space - + Space Espacio - + Creates a space object from selected boundary objects Crea un objeto espacio determinado por los objetos frontera seleccionados - + Creates a stairs object Crea un objeto escalera @@ -1114,12 +1489,12 @@ Arch_SplitMesh - + Split Mesh Dividir malla - + Splits selected meshes into independent components Divide las mallas seleccionadas en componentes independientes @@ -1127,7 +1502,7 @@ Arch_Stairs - + Stairs Escaleras @@ -1135,12 +1510,12 @@ Arch_Structure - + Structure Estructura - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Crea un objeto de estructura a partir de cero o a partir de un objeto seleccionado (croquis, contorno, cara o sólido) @@ -1148,25 +1523,38 @@ Arch_Survey - + Survey Encuesta - + Starts survey Iniciar encuesta + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Alternar IFG Brep flag + + + + Force an object to be exported as Brep or not + Forzar a un objeto para ser exportado como Brep o no + + Arch_Wall - + Wall Muro - + Creates a wall object from scratch or from a selected object (wire, face or solid) Crea un objeto muro desde cero o a partir de un objeto seleccionado (contorno, cara o sólido) @@ -1174,12 +1562,12 @@ Arch_Window - + Window Ventana - + Creates a window object from a selected object (wire, rectangle or sketch) Crea una ventana al objeto de un objeto seleccionado (alambre, rectángulo o sketch) @@ -1206,16 +1594,6 @@ IFC import Importación IFC - - - Creates groups for each Arch object type - Crea grupos para cada tipo de objeto Ach - - - - Group components by types - Componentes del grupo por tipos - 2D rendering @@ -1242,22 +1620,22 @@ Especifica cuántas veces el grosor de la línea visualizada debe aplicarse para cortar líneas - + Width: Ancho: - + Height: Altura: - + Color: Color: - + Length: Longitud: @@ -1349,7 +1727,7 @@ Tolerance value to use when checking if 2 adjacent faces as planar - Tolerance value to use when checking if 2 adjacent faces as planar + Valor de tolerancia a utilizar para comprobar si se enfrenta a 2 adyacentes son planas @@ -1364,18 +1742,13 @@ If this is checked, holes in faces will be performed by subtraction rather than using wires orientation - If this is checked, holes in faces will be performed by subtraction rather than using wires orientation + Si marca esta opción, los agujeros en las caras serán realizadas por sustraccion en lugar de utilizar la orientación de Wires Cut method Método de corte - - - Import / export - Importar / Exportar - Check this to display debug messages while importing IFC files @@ -1388,78 +1761,48 @@ - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - Si está seleccionado, los archivos IFC serán importados usando siempre el parser interno de python, incluso aunque IfcOpenShell está instalado + If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted + Si marca esta opción, las aberturas se importan como sustracciones, en contrario las paredes tendran sus aberturas restadas - Force python parser - Forzar analizador python - - - - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - - - Separate openings Aberturas separadas - + If this is checked, object names will be prefixed with the IFC ID number Si es activado, se utilizará el IFC ID number como prefijo de los nombres de objeto - + Prefix names with ID number Nombres con prefijo ID number - + Exclude list: Excluir lista: - + A comma-separated list of Ifc entities to exclude from import Una lista separada por comas de entidades Ifc a excluir de la importación - - Custom IFC schema (internal parser only) - Custom IFC schema (internal parser only) - - - + IFC export Exportación IFC - + Scaling factor Factor de escala - - - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - Los archivos IFC están escritos normalmente en milímetros. Si se desea trabajar en otra unidad, esto ayuda a escalar todas las unidades a milímetros. - - - - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - Si está seleccionado, se exportará un archivo de texto conjuntamente con el archivo Ifc, que contendrá la lista de objetos exportados para fines de verificación. - - - - Save a list of exported objects - Guarda una lista de objetos exportados - Snap to baselines of Arch objects (override with CTRL) - Snap to baselines of Arch objects (override with CTRL) + Ajuste a la línea de base de los objetos Arch (anular con CTRL) @@ -1472,7 +1815,7 @@ Paredes - + mm mm @@ -1484,7 +1827,7 @@ Rebars - Rebars + armaduras @@ -1497,95 +1840,103 @@ Transparencia: - - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - Si está seleccionado, la localización será recalculada y aplicada a los objetos como si estuvieran en el archivo IFC (lento) - - - - Separate placements - Ubicaciones separadas - - - - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - - - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Algunos visores IFC no admiten los objetos exportados como extrusiones. Con esto se fuerza a todos los objetos a ser exportados como geometría BREP. - - Force export as Breps - Forzar exportar como Breps - - - - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - <html><head/> <body><p>Los objetos que contiene varios sólidos normalmente se exportan como múltiples representaciones. A algunas aplicaciones no les mola eso. Puede utilizar esta opción para unir estos sólidos en uno solo.</p></body></html> - - - - Join multi-solid objects - Unir objetos múltiples - - - + Collada export exportar Collada - - WebGL export - Exportación de WebGL + + Hidden geomety pattern + Esconder la geometria del patron - - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. - Si está seleccionado, se discretizarán los alambres, aumentando su precisión pero incrementando el tamaño del archivo. + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + Esta es la propiedad SVG trazo-matriz de puntos que se aplica a las proyecciones de objetos ocultos. - - Discretize wires - Discretizar alambres + + 30, 10 + 30,10 + + + + Stairs + Escaleras + + + + Number of steps: + Numero de pasos: + + + + Panels + Paneles + + + + mm + mm + + + + Thickness + Espesor + + + + IFC / DAE / WebGL + IFC /DAE /WebGL + + + + Force export as Brep + Forzar exportar como Brep + + + + Workbench + + + Arch tools + Herramientas de arquitectura + + + + Draft tools + Herramientas de croquis + + + + Draft mod tools + Herramientas para modificar el croquis arch - - Arch tools - Herramientas de arco - - - - Draft tools - Herramientas de croquis - - - - Draft mod tools - Herramientas para modificación de croquis - - - + &Architecture &Arquitectura - + &Draft &Bosquejo - + Utilities Utilidades - + Snapping Ajuste diff --git a/src/Mod/Arch/Resources/translations/Arch_fi.qm b/src/Mod/Arch/Resources/translations/Arch_fi.qm index 2120916ec9..42d503261b 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_fi.qm and b/src/Mod/Arch/Resources/translations/Arch_fi.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_fi.ts b/src/Mod/Arch/Resources/translations/Arch_fi.ts index 5575424c3c..762babaf70 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fi.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fi.ts @@ -4,407 +4,362 @@ Arch - + Components Osat - + Components of this object - Tämän objektin osat + Tämän kohteen osat - + Axes Akselit - + Create Axis Luo akseli - + The intervals between axes Akseleiden välit - + The angles of each axis - Akseleiden kulmat + Jokaisen akselin kulmat - + The length of the axes Akseleiden pituudet - + The size of the axis bubbles Akselikuplien koot - + Remove Poista - + Add Lisää - + Axis Akseli - + Distance Etäisyys - + Angle Kulma - - Building - Rakennus - - - + Type conversion Tyypin muuttaminen - + Create Building Luo rakennus - + Floor Lattia - + removing sketch support to avoid cross-referencing poista luonnostuki välttääksesi ristiinviittaukset - - No objects are cut by the plane - Taso ei leikkaa yhtään objektia - - - + is not closed ei ole suljettu - + is not valid - ei ole validi + ei ole kelvollinen - + doesn't contain any solid ei sisällä yhtään monitahokasta - + contains a non-closed solid sisältää avoimen monitahokkaan - + contains faces that are not part of any solid sisältää tahkoja jotka eivät ole minkään monitahokkaan osana - + Grouping Ryhmittely - + Ungrouping Ryhmittelyn purkaminen - + Split Mesh Jaa verkko - + Mesh to Shape Verkko Muodolle - + All good! no problems found Kaikki hyvin! Ei ongelmia - + Base component Perusosa - + Additions - Lisäys + Lisäykset - + Subtractions - Vähennys + Vähennykset - + Objects Objektit - + closing Sketch edit sulje luonnosmuokkaus - + The height of this floor Tämän kerroksen korkeus - + Roof Katto - + Create Roof Luo katto - + Unable to create a roof Kattoa ei voi luoda - - The angle of this roof - Tämän katon kulma - - - + The face number of the base object used to build this roof Perusobjektin tahkojen lukumäärää käytetään tämän katon tekemiseen - + Page Sivu - + View of Näkymä - + Create Section Plane Luo lohkotaso - + The objects that must be considered by this section plane. Empty means all document Objektit joita pitää ottaa huomioon tässä lohkotasossa. Tyhkä tarkoittaa kaikkia asiakirjoja - - The display size of this section plane - Näytä tämän lohkotason koko - - - - No shape has been computed yet, select wireframe rendering and render again - Mitään muotoa ei ole vielä laskettu joten valitse lankamallin mallinnus ja mallinna uudelleen - - - + Skipping invalid object: Ohitetaan virheellinen objekti: - - Site - Sijainti - - - + Create Site Luo kohde - - Structure - Rakenne - - - + Create Structure Luo rakenne - + The length of this element, if not based on a profile Tämän elementin pituus, jos se ei perustu profiiliin - + The width of this element, if not based on a profile Tämän elementin leveys, jos se ei perustu profiiliin - + The height or extrusion depth of this element. Keep 0 for automatic Tämän elementin korkeus tai puristussyvyys. 0 tarkoittaa automaattitoimintoa - + Axes systems this structure is built on Akselijärjestelmä johon tämä rakenne perustuu - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Tämän objektin normaali puristussuunta (pidä (0,0,0) jos haluat normaalin suunnan määräytyvän automaattisesti) - + The element numbers to exclude when this structure is based on axes Montako elementtiä puristetaan, kun tämän rakenteen perustana on akselit - - Wall - Seinä - - - + Create Wall Luo seinä - + WallTrace Seinän jälki - + Wall options Seinän asetukset - + Width Leveys - + Height Korkeus - + Alignment Tasaus - + The width of this wall. Not used if this wall is based on a face Tämän seinän leveys. Ei käytössä jos tämä seinä perustuu tahkoon - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Tämän seinän korkeus. Pidä nollassa, jos haluat korkeuden määräytyvän automaattisesti. Ei käytössä, jos tämä seinä pohjautuu monitahokkaaseen - + The alignment of this wall on its base object, if applicable Tämän seinän tasaus perusobjektinsa kanssa, jos sovellettavissa - + Error: Invalid base object Virhe: Virheellinen perus-objekti - + This mesh is an invalid solid Tämä verkkopinta ei ole monitahokas - - Window - Ikkuna - - - + Create Window Luo ikkuna - + the components of this window tämän ikkunan osat - + Edit Muokkaa - + Create/update component Luo/päivitä osa - + Base 2D object Perustana oleva 2D objekti - + Wires Langat - + Create new component Luo uusi komponentti - + Name Nimi - + Type Tyyppi - + Thickness Paksuus - + Z offset Z siirtymä @@ -419,469 +374,855 @@ tiedoston %s luominen onnistui. - + Error: Couldn't determine character encoding Virhe: Käytettyä merkistökoodausta ei pystytä tunnistamaan - + Couldn't locate IfcOpenShell IfcOpenShell ei pysytty löytämään - + IFC Schema not found, IFC import disabled. IFC-rakennetta ei löydy, IFC tuonti on kytketty pois päältä. - + successfully written kirjoitettu onnistuneesti - + The numbering style - The numbering style + Numerointityyli - + removing sketch external references to avoid cross-referencing - removing sketch external references to avoid cross-referencing + Poistetaan luonnoksen ulkoiset viittaukset ristiviitteiden välttämiseksi - - Invalid cutplane - Invalid cutplane - - - + Add space boundary - Add space boundary + Lisää tilan raja - + Remove space boundary - Remove space boundary + Poista tilan raja - + Please select a base object - Please select a base object + Valitse peruskohde - + Fixtures - Fixtures + Kalusteet - + Armatures - Armatures + Ankkurit - + The placement of this group - The placement of this group + Tämän ryhmän sijoittelu Frame - Frame + Kehys - + Create Frame - Create Frame + Luo kehys - - Rebar - Rebar - - - + Create Rebar - Create Rebar + Luo raudoitustanko - + Please select a base face on a structural object - Please select a base face on a structural object + Valitse rakenteellisen kohteen peruspinta - - - Please select a base object - - Please select a base object - - - - - Section - Leikkaus - - - - The placement of this object - The placement of this object - - - - The terrain of this site - The terrain of this site - - - - The address of this site - The address of this site - - - - The geographic coordinates of this site - The geographic coordinates of this site - - - - An url that shows this site in a mapping website - An url that shows this site in a mapping website - - - - Space - Space - - - - Create Space - Create Space - - - - A base shape defining this space - A base shape defining this space - + Please select a base object + + Ole hyvä ja valitse peruskohde + + + + + The placement of this object + Tämän kohteen sijoittaminen + + + + The terrain of this site + Tämän kohteen maasto + + + + The address of this site + Tämän sivuston osoite + + + + The geographic coordinates of this site + Tämän sivuston maantieteelliset koordinaatit + + + + An url that shows this site in a mapping website + URL-osoite, joka sisältää tämän sivuston karttasivuillaan + + + + Create Space + Luo tilaa + + + The objects that make the boundaries of this space object - The objects that make the boundaries of this space object + Kohteet, jotka tekevät tämän tilakohteen rajat - - Stairs - Stairs - - - + Create Stairs - Create Stairs - - - - The length of these stairs, if no baseline is defined - The length of these stairs, if no baseline is defined - - - - The width of these stairs - The width of these stairs - - - - The total height of these stairs - The total height of these stairs - - - - The alignment of these stairs on their baseline, if applicable - The alignment of these stairs on their baseline, if applicable - - - - The number of risers in these stairs - The number of risers in these stairs - - - - The depth of the treads of these stairs - The depth of the treads of these stairs - - - - The height of the risers of these stairs - The height of the risers of these stairs - - - - The size of the nosing - The size of the nosing - - - - The thickness of the treads - The thickness of the treads - - - - The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in - The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in - - - - The type of landings of these stairs - The type of landings of these stairs - - - - The type of winders in these stairs - The type of winders in these stairs - - - - The type of structure of these stairs - The type of structure of these stairs + Luo portaat - The thickness of the massive structure or of the stringers - The thickness of the massive structure or of the stringers + The length of these stairs, if no baseline is defined + Näiden portaiden pituus, jos peruslinjaa ei ole määritelty - The width of the stringers - The width of the stringers + The width of these stairs + Näiden portaiden leveys + The total height of these stairs + Näiden portaiden kokonaiskorkeus + + + + The alignment of these stairs on their baseline, if applicable + Näiden portaiden tasaus peruslinjaan, jos on soveltuva + + + + The number of risers in these stairs + Portaiden lukumäärä portaikossa + + + + The depth of the treads of these stairs + Näiden porrasaskelmien syvyys + + + + The height of the risers of these stairs + Porrasaskelmien korkeus tässä portaikossa + + + + The size of the nosing + Askelman kulman suuruus + + + + The thickness of the treads + Askelmien paksuus + + + + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in + Blondel kertoimen tulee olla välillä 62 and 64cm tai 24.5 and 25.5tuumaa + + + + The type of landings of these stairs + Porrastasanteen tyyppi + + + + The type of winders in these stairs + Kääntyminen näissä portaissa + + + + The type of structure of these stairs + Näiden portaiden rakennetyyppi + + + + The thickness of the massive structure or of the stringers + Massiivisen rakenteen tai jäykisteiden paksuus + + + + The width of the stringers + Jäykisteiden leveys + + + The offset between the border of the stairs and the structure - The offset between the border of the stairs and the structure + Rakenteiden ja portaikon rajan välissä oleva poikkeama Wood - Wood + Puu Steel - Steel + Teräs - + Structure options - Structure options + Rakenteen vaihtoehdot - + Preset - Preset + Esiasetus - + Length Pituus - + Rotate Pyöritä - + Con&tinue - Con&tinue + Jatka - + An optional extrusion path for this element - An optional extrusion path for this element + Valinnainen puristusreitti tälle elementille - + Armatures contained in this element - Armatures contained in this element + Tämän elementin sisältämät ankkurit - - The role of this structural element - The role of this structural element - - - + The structural nodes of this element - The structural nodes of this element + Tämän elementin rakenteelliset solmukohdat - + Error: The base shape couldn't be extruded along this tool object - Error: The base shape couldn't be extruded along this tool object + Virhe: Pohjamuotoa ei voitu puristaa pitkin tätä työkalun kohdetta - + Couldn't compute a shape - Couldn't compute a shape + Ei voitu laskea muotoa - + Merge Wall - Merge Wall + Yhdistä seinä - + The selected wall contain no subwall to merge - The selected wall contain no subwall to merge + Valittu seinä ei sisällä mitään aliseinää yhdistettäväksi - + Please select only wall objects - Please select only wall objects + Valitse vain seinäkohteita - + Merge Walls - Merge Walls + Yhdistä seinät - + The length of this wall. Not used if this wall is based on an underlying object - The length of this wall. Not used if this wall is based on an underlying object + Seinän pituus. Ei käytetä, jos tämä seinä pohjautuu alla olevan kohteeseen - + The face number of the base object used to build this wall - The face number of the base object used to build this wall + Peruskohteen näkymäpintojen lukumäärää käytetään rakentamaan tämä seinä - + The offset between this wall and its baseline (only for left and right alignments) - The offset between this wall and its baseline (only for left and right alignments) + Tämän seinän ja sen peruslinjan välinen siirtymä (vain vasempaan ja oikeaan tasaukseen) - + Pick a face on an existing object or select a preset - Pick a face on an existing object or select a preset - + Valitse olemassa olevan kohteen näkymäpinta tai valitse esiasetus + + - + Window options - Window options + Ikkunan asetukset - + The depth of the hole that this window makes in its host object. Keep 0 for automatic. - The depth of the hole that this window makes in its host object. Keep 0 for automatic. + Reiän syvyys, jonka tämä ikkuna tekee isäntäkohteessa. +Pidä 0 automaattiseen toimintoon. - - an optional volume to be subtracted from hosts of this window - an optional volume to be subtracted from hosts of this window - - - + The width of this window (for preset windows only) - The width of this window (for preset windows only) + Tämän ikkunan leveys (vain esiasetuksien ikkunoille) - + The height of this window (for preset windows only) - The height of this window (for preset windows only) + Tämän ikkunan leveys (vain esiasetuksien ikkunoille) - + The normal direction of this window - The normal direction of this window + Tämän ikkunan normaali suunta - - The role of this window - The role of this window - - - + Unable to create component - Unable to create component + Osaa ei voitu luoda pycollada not found, collada support is disabled. - pycollada not found, collada support is disabled. + pycollada ei löydy, collada tuki on poistettu käytöstä. - + IfcOpenShell not found or disabled, falling back on internal parser. - IfcOpenShell not found or disabled, falling back on internal parser. + IfcOpenShell ei löydy tai poistettu käytöstä, niin palaa takaisin sisäiseen jäsentäjään. - + Distances (mm) and angles (deg) between axes - Distances (mm) and angles (deg) between axes + Etäisyydet (mm) ja kulmat (astetta) akselien väliselle - + Error computing the shape of this object - Error computing the shape of this object + Virhe laskettaessa tämän kohteen muotoa - - StructuralSystem - StructuralSystem - - - + Create Structural System - Create Structural System + Luo rakenteellinen järjestelmä - - The role of this wall - The role of this wall - - - + Error: IfcOpenShell is not installed - Error: IfcOpenShell is not installed + Virhe: IfcOpenShell ei ole asennettu - + Error: your IfcOpenShell version is too old - Error: your IfcOpenShell version is too old + Virhe: IfcOpenShell versio on liian vanha Found a shape containing curves, triangulating - Found a shape containing curves, triangulating + Löytyi käyriä sisältävä muoto, kolmiomittauksessa + + + Invalid cutplane + + Virheellinen leikkaustaso + + + + + No objects are cut by the plane + + Taso ei leikkaa yhtään kohdetta + + + + + Object doesn't have settable IFC Attributes + Kohteessa ei ole asetettavia IFC määritteitä + + + + Disabling Brep force flag of object + Kytkee pois kohteen Brep voiman lipun + + + + Enabling Brep force flag of object + Kytkee päälle kohteen Brep voiman lipun + + + + The base object this component is built upon + Peruskohde, jolle tämä osa on rakennettu + + + + Other shapes that are appended to this object + Muut muodot, jotka liitetään tähän kohteeseen + + + + Other shapes that are subtracted from this object + Muut muodot, jotka vähennetään tästä kohteesta + + + + An optional description for this component + Ylimääräinen kuvaus tälle osalle + + + + An optional tag for this component + Vaihtoehtoinen tunniste tälle osalle + + + + Custom IFC properties and attributes + Mukautetun IFC ominaisuuksia ja määritteitä + + + + A material for this object + Materiaali tälle kohteelle + + + + The role of this object + Tämän kohteen tarkoitus + + + + Specifies if this object must move together when its host is moved + Määrittää, onko tämän kohteen siirryttävä yhdessä, kun sen isäntää siirretään + + + + has no solid + ei ole yhtenäinen + + + + has an invalid shape + on virheellinen muoto + + + + has a null shape + on tyhjä muoto + + + + Cutting + Leikataan + + + + You must select a base object first! + Pitää valita peruskohde ensin! + + + + Create Equipment + Luo laitteisto + + + + You must select exactly one base object + Valitse tasan yksi peruskohde + + + + The selected object must be a mesh + Valitun kohteen on oltava verkkopinta + + + + This mesh has more than 1000 facets. + Tällä verkkopinnalla on yli 1000 sivupintaa. + + + + This operation can take a long time. Proceed? + Tämä toiminto voi kestää kauan. Jatketaanko? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + Tällä verkkopinnalla on yli 500 sivupintaa. Tämä kestää vain pari minuuttia... + + + + Create 3 views + Luo 3 näkymää + + + + an optional 2D shape representing a top view of this equipment + valinnainen 2-ulotteinen muoto esittää tämän laitteiston ylänäkymää + + + + an optional 2D shape representing a front view of this equipment + valinnainen 2-ulotteinen muoto esittää tämän laitteiston etunäkymää + + + + an optional 2D shape representing a side view of this equipment + valinnainen 2-ulotteinen muoto esittää tämän laitteiston sivunäkymää + + + + The model description of this equipment + Tämän laitteiston mallin kuvaus + + + + The url of the product page of this equipment + Tämän laitteiston tuotesivun URL-osoite + + + + Create Panel + Luo paneeli + + + + Panel options + Ohjauspaneelin vaihtoehdot + + + + The thickness or extrusion depth of this element + Tämän osan paksuus tai puristussyvyys + + + + The number of sheets to use + Käytettävien arkkien lukumäärä + + + + The offset between this panel and its baseline + Tämä paneelin ja sen peruslinjan siirtymä + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Katon profiilin muuttujat: +* kulma: kaltevuus asteissa verrattuna vaakatasoon. +* Juoksu: etäisyys seinän ja katonharjan vuorauksen välillä. +* Paksuus: katonpuolen paksuus. +* Räystäs: etäisyys viemärin ja seinän välillä. +* Korkeus: katonharjan vuorauksen korkeus (lasketaan automaattisesti) +* IdRel: suhteellinen tunnus automaattiselle laskennalle. + --- +Jos kulma = 0 ja juoksu = 0, niin profiili on identtinen suhteelliseen profiilin nähden. +Jos kulma = 0 sitten kulma lasketaan niin, että korkeus on sama kuin suhteellinen profiili. +Jos juoksu = 0 sitten juoksu lasketaan siten, että korkeus on sama kuin suhteellinen profiili. + + + + Id + Tunnus + + + + IdRel + IdRel + + + + If false, non-solids will be cut too, with possible wrong results. + Jos epätosi, niin ei-kiinteät leikataan myös, myös mahdollisten väärien tuloksien tuloksien kanssa. + + + + The display length of this section plane + Tämän lohkotason näytön pituus + + + + The display height of this section plane + Tämän lohkotason näytön korkeus + + + + The size of the arrows of this section plane + Nuolien koko tässä lohkotasossa + + + + The computed floor area of this space + Laskettu lattia-ala tässä tilassa + + + + The finishing of the floor of this space + Lattian viimeistely tässä tilassa + + + + The finishing of the walls of this space + Seinien viimeistely tässä tilassa + + + + The finishing of the ceiling of this space + sisäkaton viimeistely tässä tilassa + + + + Objects that are included inside this space, such as furniture + Kohteita, jotka sisältyvät tämän tilan sisälle, kuten huonekalut + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + Näytettävä teksti. Käytä $area, $label, $tag, $floor, $walls, $ceiling lisätäksesi vastaavan tiedon + + + + The name of the font + Kirjasimien nimi + + + + The color of the area text + Alueen tekstin väri + + + + The size of the text font + Tekstin kirjaimiston koko + + + + The size of the first line of text + Ensimmäinen tekstirivin koko + + + + The space between the lines of text + Tekstin riviväli + + + + The position of the text. Leave (0,0,0) for automatic position + Tekstin sijainti. Jätä (0,0,0) automaattista sijoittelua varten + + + + The justification of the text + Tekstin tasaus + + + + The number of decimals to use for calculated texts + Desimaalien määrä lasketulle tekstille + + + + Show the unit suffix + Näytä yksikön jälkipääte + + + + A description of the standard profile this element is based upon + Kuvaus standardiprofiilista, johon tämä osa perustuu + + + + Sill height + Ikkunalaudan/kynnyksen korkeus + + + + CutVolume + LeikkaaTilavuus + + + + CutPlane + LeikkaaTaso + + + + PreviewCutVolume + LeikkaaTilavuusEsikatselu + + + + Cut Plane + Leikkaa taso + + + + Cut Plane options + Leikkaa taso -asetukset + + + + Wich side to cut + Mikä sivu leikataan + + + + Behind + Takana + + + + Front + Etupuoli + + + + Crossing point not found in profile. + + Leikkauspistettä ei löytynyt profiilista. + + + + + A list of angles for each roof pane + Luettelo kulmista jokaiseen katto-osioon + + + + A list of horizontal length projections for each roof pane + Vaakasuorien pituuksien projektioluettelo jokaiselle katto-osioon + + + + A list of IDs of relative profiles for each roof pane + Suhteellisten profiilien tunnusluettelo jokaiselle katto-osiolle + + + + A list of thicknesses for each roof pane + Paksuuksien luettelo jokaiselle katto-osiolle + + + + A list of overhangs for each roof pane + Räystäiden luettelo jokaiselle katto-osiolle + + + + A list of calculated heights for each roof pane + Laskennallisten korkeuksien luettelo jokaiselle katto-osiolle + + + + Angle (deg) + Kulma (astetta) + + + + Run (mm) + Juoksu (mm) + + + + Thickness (mm) + Paksuus (mm) + + + + Overhang (mm) + Ylitys (mm) + + + + Height (mm) + Korkeus (mm) + + + + Arch_3Views + + + 3 views from mesh + 3d näkymiä verkkopinnasta + + + + Creates 3 views (top, front, side) from a mesh-based object + Luo 3 näkymää (ylhäältä, edessä, sivulta) verkkopintaan pohjautuvasta kohteesta + Arch_Add - + Add component Lisää osa - + Adds the selected components to the active object Lisää valitut osat Aktiiviseen objektiin @@ -889,12 +1230,12 @@ Arch_Axis - + Axis Akseli - + Creates an axis system. Luo akseli-järjestelmän. @@ -902,12 +1243,12 @@ Arch_Building - + Building Rakennus - + Creates a building object including selected objects. Luo rakennuksen objekti, sisältäen valitut objektit. @@ -915,36 +1256,59 @@ Arch_Check - + Check Tarkista - + Checks the selected objects for problems Tarkistaa valitut objektit ongelmien varalta - + Explore the contents of an Ifc file - Explore the contents of an Ifc file + Tutustu Ifc-tiedoston sisältöön Arch_CloseHoles - + Close holes Sulje reiät - + Closes holes in open shapes, turning them solids Sulkee reijät avoimissa muodoissa tehden niistä monitahokkaita - Arch_Fixture + Arch_CutPlane + + + Cut with plane + Leikkaa tasolla + + + + Cut an object with a plane + Kohteen leikkaaminen tasolla + + + + Arch_Equipment + + + Equipment + Varusteet + + + + Creates an equipment object from a selected object (Part or Mesh) + Luo varustekohteen valitusta kohteesta (osa tai verkkopinta) + Arch_Floor @@ -962,72 +1326,85 @@ Arch_Frame - + Frame - Frame + Kehys - + Creates a frame object from a planar 2D object and a profile - Creates a frame object from a planar 2D object and a profile + Luo kehyskohteen tasomaisesta 2D kohteesta ja profiilista Arch_IfcExplorer - + Ifc Explorer - Ifc Explorer + IFC selain Arch_MergeWalls - + Merge Walls - Merge Walls + Yhdistä seinät - + Merges the selected walls, if possible - Merges the selected walls, if possible + Yhdistää valitut seinät, jos mahdollista Arch_MeshToShape - + Mesh to Shape Verkko Muodolle - + Turns selected meshes into Part Shape objects Muuttaa valitut verkkopinnat Osa Muoto (Part Shape) objekteiksi - Arch_Rebar + Arch_Panel - - Rebar - Rebar + + Panel + Paneeli - + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Luo paneelikohteen tyhjästä tai valitusta kohteesta (luonnos, lanka, näkymäpinta tai monitahokas) + + + + Arch_Rebar + + + Rebar + raudoitustanko + + + Creates a Reinforcement bar from the selected face of a structural object - Creates a Reinforcement bar from the selected face of a structural object + Luo betoniterästangon valitusta rakenteellisen kohteen näkymäpinnasta Arch_Remove - + Remove component Poista osa - + Remove the selected components from their parents, or create a hole in a component Poistaa valitut komponentit vanhemmiltaan tai luo reiän komponentissa @@ -1035,12 +1412,12 @@ Arch_RemoveShape - + Remove Shape from Arch Muodon poistaminen Arkkitehtuurista - + Removes cubic shapes from Arch components Poistaa kuutiomuodot Arkkitehtuurisista komponenteista @@ -1048,25 +1425,25 @@ Arch_Roof - + Roof Katto - - Creates a roof object from the selected face of an object - Luo objektin valitusta tahkosta katto-objektin + + Creates a roof object from the selected wire. + Luo kattokohteen valitusta lankakuvasta. Arch_SectionPlane - + Section Plane Osan taso - + Creates a section plane object, including the selected objects Luo lohkotaso-objektin ottaen mukaan valitut objektit @@ -1074,12 +1451,12 @@ Arch_SelectNonSolidMeshes - + Select non-manifold meshes Valitse ei-moninaiset verkot - + Selects all non-manifold meshes from the document or from the selected groups Valitsee kaikki ei-moninaiset verkot asiakirjasta tai valituista ryhmistä @@ -1087,12 +1464,12 @@ Arch_Site - + Site Sijainti - + Creates a site object including selected objects. Luo objektin sijainnin, sisältäen valitut objektit. @@ -1100,30 +1477,30 @@ Arch_Space - + Space - Space + Tila - + Creates a space object from selected boundary objects - Creates a space object from selected boundary objects + Luo tilakohteen valituista rajakohteista - + Creates a stairs object - Creates a stairs object + Luo porras -kohde Arch_SplitMesh - + Split Mesh Jaa verkko - + Splits selected meshes into independent components Jakaa valitut verkot riippumattomiin komponentteihin @@ -1131,46 +1508,59 @@ Arch_Stairs - + Stairs - Stairs + Portaat Arch_Structure - + Structure Rakenne - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) - Luo rakenne-objektin piirrosta tai valitusta objektista (sketsi, lanka, pinta tai kiinteä) + Luo rakenne-objektin piirrosta tai valitusta objektista (sketsi, lanka, pinta tai monitahokas) Arch_Survey - + Survey - Survey + Tutkimus - + Starts survey - Starts survey + Aloittaa tutkimuksen + + + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Näytä tai piilota IFC Brep lippu + + + + Force an object to be exported as Brep or not + Pakota kohde vietäväksi Brep -muodossa tai ei Arch_Wall - + Wall Seinä - + Creates a wall object from scratch or from a selected object (wire, face or solid) Luo seinä-objektin piirroista tai valitusta objektista (lanka, pinta tai kiinteä) @@ -1178,12 +1568,12 @@ Arch_Window - + Window Ikkuna - + Creates a window object from a selected object (wire, rectangle or sketch) Luo ikkunaobjektin valitusta objektista (lanka, suorakaide tai luonnos) @@ -1210,16 +1600,6 @@ IFC import IFC-tuonti - - - Creates groups for each Arch object type - Luo ryhmän jokaiselle Arch tyypin objektille - - - - Group components by types - Ryhmittelee osat tyypeittäin - 2D rendering @@ -1246,29 +1626,29 @@ Määrittää montko kertaa näytetyn viivan paksuutta pitää soveltaa leikattuihin viivoihin - + Width: Leveys: - + Height: Korkeus: - + Color: - Color: + Väri: - + Length: Pituus: Diameter - Diameter + Halkaisija @@ -1278,217 +1658,182 @@ The default width for new windows - The default width for new windows + Oletusleveys uusille ikkunoille The default height for new windows - The default height for new windows + Oletuskorkeus uusille ikkunoille Thickness: - Thickness: + Paksuus: The default thickness for new windows - The default thickness for new windows + Uusien ikkunoiden oletuspaksuus Frame color: - Frame color: + Kehyksen väri: Glass color: - Glass color: + Lasin väri: Snapping - Snapping + Katkaiseva Walls drawing - Walls drawing + Seinien piirros Auto-join walls - Auto-join walls + Seinien liittäminen automaattisesti If this is checked, when 2 similar walls are being connected, their underlying sketches will be joined into one, and the two walls will become one - If this is checked, when 2 similar walls are being connected, their underlying sketches will be joined into one, and the two walls will become one + Jos tämä on valittuna, niin 2:n samanlaisen seinän liitoksessa niiden taustalla olevat luonnokset yhdistetään yhdeksi ja kaksi seinää muuttuvat yhdeksi Join walls base sketches when possible - Join walls base sketches when possible + Liitä seinien pohjaluonnokset mahdollisuuksien mukaan Mesh to Shape Conversion - Mesh to Shape Conversion + Verkkopinnasta muodoksi muunnos If this is checked, conversion is faster but the result might still contain triangulated faces - If this is checked, conversion is faster but the result might still contain triangulated faces + Jos tämä on valittu, muuntaminen on nopeampi mutta tulos saattaa vielä sisältää kolmioituja näkymäpintoja Fast conversion - Fast conversion + Nopea muuntaminen Tolerance: - Tolerance: + Toleranssi: Tolerance value to use when checking if 2 adjacent faces as planar - Tolerance value to use when checking if 2 adjacent faces as planar + Tätä toleranssiarvoa käytetään, kun tarkistetaan, onko 2 viereistä näkymäpintaa tasossa If this is checked, flat groups of faces will be force-flattened, resulting in possible gaps and non-solid results - If this is checked, flat groups of faces will be force-flattened, resulting in possible gaps and non-solid results + Jos tämä on valittuna, näkymien tasoryhmiä pakotetaan litteäksi, jolloin seurauksena voi olla mahdollisia aukkoja ja ei-ehjiä tuloksia Force flat faces - Force flat faces + Pakota tasomaiset näkymät If this is checked, holes in faces will be performed by subtraction rather than using wires orientation - If this is checked, holes in faces will be performed by subtraction rather than using wires orientation + Jos tämä on valittuna, reiät näkymissä esitetään mielummin vähentämällä kuin käyttämällä langoitussuuntaa Cut method - Cut method - - - - Import / export - Import / export + Leikkaus menetelmä Check this to display debug messages while importing IFC files - Check this to display debug messages while importing IFC files + Valöitse tämä näyttääksesi debug viestejä IFC-tiedostojen tuonnissa Show debug messages - Show debug messages + Näytä debug-viestit - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed + If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted + Jos tämä on valittuna, aukot tuodaan vähennyslaskulla, muuten seinämuodoissa on jo niiden aukot vähennetty - Force python parser - Force python parser + Separate openings + Erillinen aukot + + + + If this is checked, object names will be prefixed with the IFC ID number + Jos tämä on valittuna, kohteiden nimet ovat etuliitteellä IFC tunnus + + + + Prefix names with ID number + Lisää tunnusnumero nimien eteen - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - - - - Separate openings - Separate openings - - - - If this is checked, object names will be prefixed with the IFC ID number - If this is checked, object names will be prefixed with the IFC ID number - - - - Prefix names with ID number - Prefix names with ID number - - - Exclude list: - Exclude list: + Pois luettelosta: - + A comma-separated list of Ifc entities to exclude from import - A comma-separated list of Ifc entities to exclude from import + Pilkuin erotettu Ifc -kohteiden lista, mitkä jätetään pois tuonnista - - Custom IFC schema (internal parser only) - Custom IFC schema (internal parser only) - - - + IFC export - IFC export + IFC-vienti - + Scaling factor - Scaling factor - - - - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - - - - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - - - - Save a list of exported objects - Save a list of exported objects + Skaalauskerroin Snap to baselines of Arch objects (override with CTRL) - Snap to baselines of Arch objects (override with CTRL) + Napsauta kaarikohteen peruslinjoihin (Ohita CTRL:lla) Defaults - Defaults + Oletusarvot Walls - Walls + Seinät - + mm mm Structures - Structures + Rakenteet Rebars - Rebars + Raudoitustangot @@ -1501,97 +1846,105 @@ Läpinäkyvyys: - - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - - - - Separate placements - Separate placements - - - - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - - - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. - Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. + Jotkut IFC katseluohjelmat eivät pidä kohteiden viemisestä puristeina. Tämän avulla voit pakottaa kaikki kohteet vietäväksi BREP geometriassa. - - Force export as Breps - Force export as Breps - - - - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - - - - Join multi-solid objects - Join multi-solid objects - - - + Collada export - Collada export + Collada vienti - - WebGL export - WebGL export + + Hidden geomety pattern + Piilotettu geometria malli - - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + Tämä on SVG stroke-dasharray /-iskuviivamatriisi ominaisuus, jota käytetään piilotettujen kohteiden projektioihin. - - Discretize wires - Discretize wires + + 30, 10 + 30, 10 + + + + Stairs + Portaat + + + + Number of steps: + Askelten määrä: + + + + Panels + Paneelit + + + + mm + mm + + + + Thickness + Paksuus + + + + IFC / DAE / WebGL + IFC / DAE / WebGL + + + + Force export as Brep + Pakota vienti Brep muodossa + + + + Workbench + + + Arch tools + Kaari työkalut + + + + Draft tools + Vedostyökalut + + + + Draft mod tools + Vedosmuokkaustyökalut arch - - Arch tools - Arkkitehtuuri työkalut - - - - Draft tools - Hahmotelma työkalut - - - - Draft mod tools - Luonnosmuokkaustyökalut - - - + &Architecture &Arkkitehtuuri - + &Draft - &Luonnos + &Vedos - + Utilities - Utilities + Apuvälineet - + Snapping - Snapping + Katkaiseva diff --git a/src/Mod/Arch/Resources/translations/Arch_fr.qm b/src/Mod/Arch/Resources/translations/Arch_fr.qm index f9cc79626b..dbb2bfc6eb 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_fr.qm and b/src/Mod/Arch/Resources/translations/Arch_fr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_fr.ts b/src/Mod/Arch/Resources/translations/Arch_fr.ts index c0c0f14e77..15cfeba790 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fr.ts @@ -4,407 +4,362 @@ Arch - + Components Composants - + Components of this object Composants de cet objet - + Axes Axes - + Create Axis Création d'un système d'axes - + The intervals between axes Les intervalles entre les axes - + The angles of each axis Les angles de chaque axe - + The length of the axes La longueur des axes - + The size of the axis bubbles La taille des bulles d'axe - + Remove Enlever - + Add Ajouter - + Axis Axe - + Distance Distance - + Angle Angle - - Building - Bâtiment - - - + Type conversion Conversion de type - + Create Building Création d'un bâtiment - + Floor Étage - + removing sketch support to avoid cross-referencing Le support de l'esquisse de base a été retiré pour éviter une référence croisée - - No objects are cut by the plane - Aucun objet n'est coupé par ce plan - - - + is not closed n'est pas fermé - + is not valid n'est pas valide - + doesn't contain any solid ne contient aucun solide - + contains a non-closed solid contient un solide non fermé - + contains faces that are not part of any solid contient des faces qui ne font pas partie d'un solide - + Grouping Regroupement - + Ungrouping Dégroupement - + Split Mesh Diviser un maillage - + Mesh to Shape Maillage vers Forme - + All good! no problems found Tout est en ordre! aucun problème constaté - + Base component Composant de base - + Additions Additions - + Subtractions Soustractions - + Objects Objets - + closing Sketch edit fermeture de l'édition de l'esquisse - + The height of this floor La hauteur de cet étage - + Roof Toiture - + Create Roof Création d'une toiture - + Unable to create a roof Impossible de créer une toiture - - The angle of this roof - L'angle de cette toiture - - - + The face number of the base object used to build this roof Le numéro d'ordre de la face de l'objet de base utilisée pour construire cette toiture - + Page Feuille - + View of Vue de - + Create Section Plane Création d'un plan de coupe - + The objects that must be considered by this section plane. Empty means all document Les objets qui doivent être pris en compte par ce plan de coupe. Vide signifie tous les objets du document - - The display size of this section plane - La taille d'affichage du plan de coupe - - - - No shape has been computed yet, select wireframe rendering and render again - Aucune forme n'a encore été calculée, sélectionnez "rendu filaire" et faites un nouveau rendu - - - + Skipping invalid object: Objet invalide rejeté: - - Site - Site - - - + Create Site Création d'un Site - - Structure - Structure - - - + Create Structure Création d'une structure - + The length of this element, if not based on a profile La longueur de cet élément, si il n'est pas basé sur un profil - + The width of this element, if not based on a profile La largeur de cet élément, si il n'est pas basé sur un profil - + The height or extrusion depth of this element. Keep 0 for automatic La hauteur ou profondeur d'extrusion de cet élément. Mettre 0 pour automatique - + Axes systems this structure is built on Systèmes d'axes sur lesquels cette structure est basée - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) La direction d'extrusion normale de cet objet (mettre (0,0,0) pour normale automatique) - + The element numbers to exclude when this structure is based on axes Les numéros d'ordres des éléments à exclure quand cette structure est basée sur des axes - - Wall - Mur - - - + Create Wall Création d'un mur - + WallTrace TraceDuMur - + Wall options Options de mur - + Width Largeur - + Height Hauteur - + Alignment Alignement - + The width of this wall. Not used if this wall is based on a face La largeur de ce mur. Pas utilisée si ce mur est basé sur une face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid La hauteur de ce mur. Mettre 0 pour automatique. Pas utilisés si ce mur est basé sur un solide - + The alignment of this wall on its base object, if applicable L'alignement de ce mur sur son objet de base, le cas échéant - + Error: Invalid base object Erreur : Objet de base non valide - + This mesh is an invalid solid Ce maillage n'est pas un solide valide - - Window - Fenêtre - - - + Create Window Création d'une fenêtre - + the components of this window les composants de cette fenêtre - + Edit Éditer - + Create/update component Créer ou mettre le composant à jour - + Base 2D object Objet 2D de base - + Wires Filaires - + Create new component Créer un nouveau composant - + Name Nom - + Type Type - + Thickness Épaisseur - + Z offset Décalage Z @@ -419,71 +374,66 @@ Le fichier %s a été correctement créé. - + Error: Couldn't determine character encoding Erreur : impossible de déterminer l'encodage de caractères - + Couldn't locate IfcOpenShell Impossible de localiser IfcOpenShell - + IFC Schema not found, IFC import disabled. schéma IFC introuvable, l'importation de fichiers IFC est désactivée. - + successfully written enregistré avec succès - + The numbering style Le style de numérotation - + removing sketch external references to avoid cross-referencing Suppression des références externes dans les esquisses pour éviter les références croisées - - Invalid cutplane - Plan de coupe non valide - - - + Add space boundary Ajouter une frontière spatiale - + Remove space boundary Enlever une frontière spatiale - + Please select a base object Veuillez sélectionner un objet de base - + Fixtures Accessoires - + Armatures Armatures - + The placement of this group Le placement de ce groupe @@ -493,171 +443,146 @@ Ossature - + Create Frame Créer une ossature - - Rebar - Barres d'armature - - - + Create Rebar Créer des barres d'armature - + Please select a base face on a structural object Veuillez sélectionner une face support sur un objet de structure - + Please select a base object Veuillez sélectionner un objet support - - Section - Section - - - + The placement of this object Le placement de cet objet - + The terrain of this site La forme de ce site - + The address of this site L'adresse de ce site - + The geographic coordinates of this site Les coordonnées géographiques de ce site - + An url that shows this site in a mapping website Une url qui montre ce site sur un site web de cartographie - - Space - Espace - - - + Create Space Créer un Espace - - A base shape defining this space - Une forme de base définissant cet espace - - - + The objects that make the boundaries of this space object Les objets qui délimitent cet espace - - Stairs - Escalier - - - + Create Stairs Créer un escalier - + The length of these stairs, if no baseline is defined La longueur de cet escalier, si aucune ligne de base n'est définie - + The width of these stairs La largeur de cet escalier - + The total height of these stairs La hauteur totale de cet escalier - + The alignment of these stairs on their baseline, if applicable L'alignement de cet escalier sur sa ligne de base, le cas échéant - + The number of risers in these stairs Le nombre de marches dans cet escalier - + The depth of the treads of these stairs Le giron de cet escalier - + The height of the risers of these stairs La hauteur de marche de cet escalier - + The size of the nosing La largeur du nez de marche - + The thickness of the treads L'épaisseur des marches - + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in Le coefficient de Blondel, doit être compris entre 62 et 64 cm ou 24,5 et 25,5 pouces - + The type of landings of these stairs Le type des palier de cet escalier - + The type of winders in these stairs Le type de tournant de ces escaliers - + The type of structure of these stairs Le type de structure de cet escalier - + The thickness of the massive structure or of the stringers La hauteur de la structure ou des limons - + The width of the stringers L'épaisseur des limons - + The offset between the border of the stairs and the structure Le décalage entre le bord de l'escalier et la structure @@ -672,138 +597,123 @@ Acier - + Structure options Options de la structure - + Preset Préconfiguration - + Length Longueur - + Rotate Pivoter - + Con&tinue Continuer - + An optional extrusion path for this element Un chemin d'extrusion facultatif pour cet élément - + Armatures contained in this element Armatures contenues dans cet élément - - The role of this structural element - Le rôle de cet élément de structure - - - + The structural nodes of this element Les nœuds structurels de cet élément - + Error: The base shape couldn't be extruded along this tool object Erreur : la forme support ne peut pas être extrudée le long de cet outil object - + Couldn't compute a shape - Forme non solvable + Forme incalculable - + Merge Wall Fusionner le mur - + The selected wall contain no subwall to merge Il n'y a pas de sous-murs à fusionner au mur sélectionné - + Please select only wall objects Veuillez sélectionner uniquement des objets Murs - + Merge Walls Fusionner des murs - + The length of this wall. Not used if this wall is based on an underlying object La longueur de ce mur. Pas utilisé si ce mur est basé sur un objet sous-jacent - + The face number of the base object used to build this wall - Le numéro de la face de l'objet de base utilisée pour construire ce mur + L'index de la face de l'objet de base utilisée pour construire ce mur - + The offset between this wall and its baseline (only for left and right alignments) Le décalage entre ce mur et sa ligne de référence (uniquement pour les alignements gauche et droite) - + Pick a face on an existing object or select a preset Choisissez une face sur un objet existant, ou sélectionnez un paramètre prédéfini - + Window options Options de la fenêtre - + The depth of the hole that this window makes in its host object. Keep 0 for automatic. - La profondeur du trou que fait de cette fenêtre dans son objet hôte. Garder 0 pour automatique. + La profondeur de la cavité que fait cette fenêtre dans son objet hôte. Garder 0 pour automatique. - - an optional volume to be subtracted from hosts of this window - un volume optionnel à soustraire des hôtes de cette fenêtre - - - + The width of this window (for preset windows only) La largeur de cette fenêtre (pour fenêtres prédéfini uniquement) - + The height of this window (for preset windows only) La hauteur de cette fenêtre (pour fenêtres prédéfini uniquement) - + The normal direction of this window La direction de la normale à cette fenêtre - - The role of this window - Le rôle de cette fenêtre - - - + Unable to create component Impossible de créer le composant @@ -816,45 +726,35 @@ pycollada est introuvable, le support de collada est désactivé, export dae impossible - + IfcOpenShell not found or disabled, falling back on internal parser. IfcOpenShell est introuvable ou désactivé, bascule sur analyseur interne. - + Distances (mm) and angles (deg) between axes Distances (mm) et angles (degrés) entre les axes - + Error computing the shape of this object Erreur lors du calcul de la forme de cet objet - - StructuralSystem - Système structurel - - - + Create Structural System Créer un système structurel - - The role of this wall - Le rôle de ce mur - - - + Error: IfcOpenShell is not installed Erreur : IfcOpenShell n'est pas installé - + Error: your IfcOpenShell version is too old Erreur : votre version de IfcOpenShell est trop ancienne @@ -867,16 +767,455 @@ Forme contenant des courbes: Triangulation + + + Invalid cutplane + + Plan de coupe non valide + + + + + No objects are cut by the plane + + Aucun objets coupés par le plan + + + + + Object doesn't have settable IFC Attributes + L'objet n'a pas d'attributs IFC définissables + + + + Disabling Brep force flag of object + Désactiver le drapeau de forçage Brep de l'objet + + + + Enabling Brep force flag of object + Activer le drapeau de forçage Brep de l'objet + + + + The base object this component is built upon + L'objet de base sur lequel est construit ce composant + + + + Other shapes that are appended to this object + Autres formes qui sont ajoutés à cet objet + + + + Other shapes that are subtracted from this object + Autres formes qui sont soustraites de cet objet + + + + An optional description for this component + Une description facultative pour ce composant + + + + An optional tag for this component + Une balise facultative pour ce composant + + + + Custom IFC properties and attributes + Attributs et propriétés IFC personnalisées + + + + A material for this object + Un matériau pour cet objet + + + + The role of this object + Le rôle de cet objet + + + + Specifies if this object must move together when its host is moved + Spécifie si cet objet doit se déplacer avec son hôte lorsque ce dernier est déplacé + + + + has no solid + n'a aucun solide + + + + has an invalid shape + a une forme non valide + + + + has a null shape + a une forme nulle + + + + Cutting + Coupe + + + + You must select a base object first! + Vous devez sélectionner un objet de base d'abord ! + + + + Create Equipment + Créer Equipements + + + + You must select exactly one base object + Vous devez sélectionner exactement un objet de base + + + + The selected object must be a mesh + L'objet sélectionné doit être un maillage + + + + This mesh has more than 1000 facets. + Ce maillage a plus de 1000 facettes. + + + + This operation can take a long time. Proceed? + Cette opération peut prendre un certain temps. Procéder ? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + Le maillage a plus de 500 facettes. Cela va prendre quelques minutes... + + + + Create 3 views + Créer 3 vues + + + + an optional 2D shape representing a top view of this equipment + une forme 2D facultative qui représente une vue de dessus de cet équipement + + + + an optional 2D shape representing a front view of this equipment + une forme 2D facultative qui représente une vue de face de cet équipement + + + + an optional 2D shape representing a side view of this equipment + une forme 2D facultative qui représente une vue de côté de cet équipement + + + + The model description of this equipment + Description du modèle de cet équipement + + + + The url of the product page of this equipment + L'url de la page produit de cet équipement + + + + Create Panel + Créer Panneau + + + + Panel options + Options du panneau + + + + The thickness or extrusion depth of this element + L'épaisseur ou la profondeur d'extrusion de cet élément + + + + The number of sheets to use + Le nombre de feuilles à utiliser + + + + The offset between this panel and its baseline + Le décalage entre ce panneau et sa ligne de base + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Paramètres des profils de toit: +* Angle : pente en degrés par rapport à l'horizontale. +* Largeur : distance entre le mur et le faîtage. +* Épaisseur : épaisseur du côté du toit. +* Débord : distance entre l'égout et le mur. +* Hauteur : hauteur du faîtage (calculé automatiquement) +* IdRel : ID du profil relatif pour les calculs automatiques. +--- +Si Angle = 0 et Largeur = 0 alors le profil est identique au profil relatif. +Si Angle = 0 alors l'angle est calculé de sorte que la hauteur soit la même que celle du profil relatif. +Si Largeur = 0 alors la largeur est calculée de façon que la hauteur du profil soit la même que celle du profil relatif. + + + + Id + ID + + + + IdRel + ID Relatif + + + + If false, non-solids will be cut too, with possible wrong results. + Si Faux, les non-solides seront coupé aussi, avec des mauvais résultats possible. + + + + The display length of this section plane + La longueur d'affichage de ce plan de section + + + + The display height of this section plane + La hauteur affichée de ce plan de section + + + + The size of the arrows of this section plane + La taille des flèches de ce plan de section + + + + The computed floor area of this space + La surface de plancher calculée de cet espace + + + + The finishing of the floor of this space + La finition du plancher de cet espace + + + + The finishing of the walls of this space + La finition des murs de cet espace + + + + The finishing of the ceiling of this space + La finition du plafond de cet espace + + + + Objects that are included inside this space, such as furniture + Objets qui sont inclus à l'intérieur de cet espace, tels que des meubles + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + Le texte à afficher. Utilisez $area, $label, $tag, $floor, $walls, $ceiling pour insérer les données respectives + + + + The name of the font + Le nom de la police + + + + The color of the area text + La couleur de la zone texte + + + + The size of the text font + La taille de la police du texte + + + + The size of the first line of text + La taille de la première ligne de texte + + + + The space between the lines of text + L'espace entre les lignes de texte + + + + The position of the text. Leave (0,0,0) for automatic position + La position du texte. Laisser (0,0,0) pour un positionnement automatique + + + + The justification of the text + La justification du texte + + + + The number of decimals to use for calculated texts + Le nombre de décimales à utiliser pour les textes calculés + + + + Show the unit suffix + Afficher le suffixe de l'unité + + + + A description of the standard profile this element is based upon + Une description du profil standard sur lequel est basé cet élément + + + + Sill height + Hauteur de seuil + + + + CutVolume + Volume de Coupe + + + + CutPlane + Plan de Coupe + + + + PreviewCutVolume + Prévisualisation du Volume de Coupe + + + + Cut Plane + Plan de coupe + + + + Cut Plane options + Options du plan de coupe + + + + Wich side to cut + Quel côté à couper + + + + Behind + Derrière + + + + Front + Face + + + + Crossing point not found in profile. + + Point de passage non trouvé dans le profile. + + + + + A list of angles for each roof pane + Une liste des angles pour chaque pan de toit + + + + A list of horizontal length projections for each roof pane + Une liste des longueurs horizontales de projections pour chaque pan de toit + + + + A list of IDs of relative profiles for each roof pane + Une liste d'ID de profils relatif pour chaque pan de toit + + + + A list of thicknesses for each roof pane + Une liste des épaisseurs pour chaque pan de toit + + + + A list of overhangs for each roof pane + Une liste des débords pour chaque pan de toit + + + + A list of calculated heights for each roof pane + Une liste des hauteurs calculées pour chaque pan de toit + + + + Angle (deg) + Angle (deg) + + + + Run (mm) + Largeur (mm) + + + + Thickness (mm) + Épaisseur (mm) + + + + Overhang (mm) + Débord (mm) + + + + Height (mm) + Hauteur (mm) + + + + Arch_3Views + + + 3 views from mesh + 3 vues depuis un maillage + + + + Creates 3 views (top, front, side) from a mesh-based object + Créer 3 vues (haut, avant, côté) à partir d'un objet de maillage + Arch_Add - + Add component Ajouter un composant - + Adds the selected components to the active object Ajoute les composants sélectionnés à l'objet actif @@ -884,12 +1223,12 @@ Arch_Axis - + Axis Axe - + Creates an axis system. Crée un système d'axes. @@ -897,12 +1236,12 @@ Arch_Building - + Building Bâtiment - + Creates a building object including selected objects. Crée un objet bâtiment à partir des objets sélectionnés. @@ -910,17 +1249,17 @@ Arch_Check - + Check Vérifier - + Checks the selected objects for problems Vérifie si les objets sélectionnés présentent un problème - + Explore the contents of an Ifc file Explorer le contenu d'un fichier Ifc @@ -928,18 +1267,41 @@ Arch_CloseHoles - + Close holes Fermer les trous - + Closes holes in open shapes, turning them solids Convertit les formes ouvertes en solides, en fermant leurs trous - Arch_Fixture + Arch_CutPlane + + + Cut with plane + Couper selon un plan + + + + Cut an object with a plane + Couper un objet selon un plan + + + + Arch_Equipment + + + Equipment + Équipement + + + + Creates an equipment object from a selected object (Part or Mesh) + Créer un objet Équipement à partir de l'objet sélectionné (Solide ou Maillage) + Arch_Floor @@ -957,12 +1319,12 @@ Arch_Frame - + Frame Ossature - + Creates a frame object from a planar 2D object and a profile Crée une ossature à partir d'un objet 2D plan et d'un profil @@ -970,7 +1332,7 @@ Arch_IfcExplorer - + Ifc Explorer Explorateur IFC @@ -978,12 +1340,12 @@ Arch_MergeWalls - + Merge Walls Fusionner des murs - + Merges the selected walls, if possible Fusionne les murs sélectionnés, si possible @@ -991,25 +1353,38 @@ Arch_MeshToShape - + Mesh to Shape Maillage vers Forme - + Turns selected meshes into Part Shape objects Transforme les maillages sélectionnées en formes + + Arch_Panel + + + Panel + Panneau + + + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Crée un objet Panneau à partir de zéro ou d'un objet sélectionné (croquis, filaire, face ou solide) + + Arch_Rebar - + Rebar Barres d'armature - + Creates a Reinforcement bar from the selected face of a structural object Crée une barre de renfort par rapport à la face sélectionnée d'un objet structurel @@ -1017,12 +1392,12 @@ Arch_Remove - + Remove component Enlever une composante - + Remove the selected components from their parents, or create a hole in a component Retirer les composants sélectionnés de leurs parents, ou créer un trou dans un composant @@ -1030,12 +1405,12 @@ Arch_RemoveShape - + Remove Shape from Arch Supprimer la forme - + Removes cubic shapes from Arch components Supprime les formes cubiques des composants Arch @@ -1043,25 +1418,25 @@ Arch_Roof - + Roof Toiture - - Creates a roof object from the selected face of an object - Crée une toiture a partir d'une face sélectionnée + + Creates a roof object from the selected wire. + Créer un objet Toiture à partir du filaire sélectionné. Arch_SectionPlane - + Section Plane Plan de section - + Creates a section plane object, including the selected objects Crée un plan de coupe à partir des objets sélectionnés @@ -1069,12 +1444,12 @@ Arch_SelectNonSolidMeshes - + Select non-manifold meshes Sélectionner les maillages non-manifold - + Selects all non-manifold meshes from the document or from the selected groups Sélectionne tous les maillages non-manifold du document ou des groupes sélectionnés @@ -1082,12 +1457,12 @@ Arch_Site - + Site Site - + Creates a site object including selected objects. Crée un objet site à partir des objets sélectionnés. @@ -1095,17 +1470,17 @@ Arch_Space - + Space Espace - + Creates a space object from selected boundary objects Crée un objet pièce à partir du contour formé par les objets sélectionnés - + Creates a stairs object Crée un escalier @@ -1113,12 +1488,12 @@ Arch_SplitMesh - + Split Mesh Diviser une maille - + Splits selected meshes into independent components Divise les maillages sélectionnés en composantes indépendantes @@ -1126,7 +1501,7 @@ Arch_Stairs - + Stairs Escalier @@ -1134,12 +1509,12 @@ Arch_Structure - + Structure Structure - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Crée un objet de structure à partir de zéro ou d'un objet sélectionné (esquisse, ligne, face ou solide) @@ -1147,25 +1522,38 @@ Arch_Survey - + Survey Prise de côtes - + Starts survey Démarrer la prise de côte + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Activer/désactiver le drapeau IFC Brep + + + + Force an object to be exported as Brep or not + Forcer un objet à être exporté en Brep ou non + + Arch_Wall - + Wall Mur - + Creates a wall object from scratch or from a selected object (wire, face or solid) Crée un objet mur partir de zéro ou d'un objet sélectionné (une ligne, une face ou un solide) @@ -1173,12 +1561,12 @@ Arch_Window - + Window Fenêtre - + Creates a window object from a selected object (wire, rectangle or sketch) Crée une fenêtre a partir d'un objet sélectionné (filaire, rectangle ou esquisse) @@ -1205,16 +1593,6 @@ IFC import Importation IFC - - - Creates groups for each Arch object type - Crée des groupes pour chaque type d'objet Arch - - - - Group components by types - Grouper les composants par type - 2D rendering @@ -1241,22 +1619,22 @@ Spécifie combien de fois l'épaisseur des lignes en vue doit être appliquée aux lignes en coupe - + Width: Largeur : - + Height: Hauteur : - + Color: Couleur: - + Length: Longueur : @@ -1363,18 +1741,13 @@ If this is checked, holes in faces will be performed by subtraction rather than using wires orientation - Si cette case est cochée, les trous dans les faces seront interprétés par une soustraction plutôt qu'à l'aide de l'orientation des arêtes + Si cette case est cochée, les trous dans les faces seront réalisés par une soustraction plutôt qu'à l'aide de l'orientation des arêtes Cut method Méthode de soustraction - - - Import / export - Import / Export - Check this to display debug messages while importing IFC files @@ -1387,74 +1760,44 @@ - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - Si cette case est cochée, les fichiers IFC seront toujours importés avec l'analyseur python interne, même si IfcOpenShell est installé - - - - Force python parser - Forcer l'utilisation de l'analyseur python - - - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted Si cette case est cochée, les ouvertures seront importés comme des soustractions, autrement les murs auront déjà leurs ouvertures soustraites - + Separate openings Séparation des ouvertures - + If this is checked, object names will be prefixed with the IFC ID number Si cette case est cochée, des noms d'objets seront précédés avec du numéro d'identification IFC - + Prefix names with ID number Préfixe des noms avec numéro ID - + Exclude list: Liste d'exclusion : - + A comma-separated list of Ifc entities to exclude from import Une liste, séparée par des virgules, des entités Ifc à exclure lors de l'importation - - Custom IFC schema (internal parser only) - Schéma IFC personnalisé (analyseur interne seulement) - - - + IFC export Export IFC - + Scaling factor Facteur d'échelle - - - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - Les fichiers IFC sont généralement rédigés en millimètres. Si vous travaillez dans une unité différente, cela vous permet de mettre à l'échelle toutes vos unités afin d'être exprimées en millimètres. - - - - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - Si cette case est cochée, un fichier texte sera exporté avec le fichier IFC, contenant la liste des objets exportés, à des fins de vérification. - - - - Save a list of exported objects - Sauver une liste des objets exportés - Snap to baselines of Arch objects (override with CTRL) @@ -1471,7 +1814,7 @@ Murs - + mm mm @@ -1496,95 +1839,103 @@ Transparence : - - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - Si cette case est cochée, les placements seront recalculés et appliqués aux objets tels qu'ils étaient dans le fichier IFC (plus lent) - - - - Separate placements - Séparer les placements - - - - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - - - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Certaines applications IFC n'aiment pas les objets exportés sous forme de profils extrudés. Cela permet de forcer tous les objets à être exportés comme géométrie BREP. - - Force export as Breps - Forcer l'exportation comme Breps - - - - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - <html><head/> <body><p>Les objets contenant plusieurs solides sont généralement exportés avec plusieurs représentations. Certaines applications n'aiment pas cela, cependant. Vous pouvez utiliser cette option pour unir ces solides en un seul.</p></body></html> - - - - Join multi-solid objects - Joindre les objets multi-solides - - - + Collada export Export Collada - - WebGL export - Export WebGL + + Hidden geomety pattern + Géométrie de texture cachée - - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. - Si cette case est cochée, les courbes seront visuellement plus précises, mais des fichiers plus lourds. + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + Il s'agit de la propriété SVG trait-pointillés à appliquer aux projections d'objets cachés. - - Discretize wires - discrétisation des lignes + + 30, 10 + 30, 10 + + + + Stairs + Escalier + + + + Number of steps: + Nombre d'étapes : + + + + Panels + Panneaux + + + + mm + mm + + + + Thickness + Épaisseur + + + + IFC / DAE / WebGL + IFC / DAE / WebGL + + + + Force export as Brep + Forcer l'export en Brep + + + + Workbench + + + Arch tools + Outils Arch + + + + Draft tools + Outils Dessin + + + + Draft mod tools + Outils du module Dessin arch - - Arch tools - Outils d'architecture - - - - Draft tools - Outils Draft - - - - Draft mod tools - Outils de modification Draft - - - + &Architecture &Architecture - + &Draft &Draft - + Utilities Utilitaires - + Snapping Accroche diff --git a/src/Mod/Arch/Resources/translations/Arch_hr.qm b/src/Mod/Arch/Resources/translations/Arch_hr.qm index 79a526a45f..fe6fac992e 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_hr.qm and b/src/Mod/Arch/Resources/translations/Arch_hr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_hr.ts b/src/Mod/Arch/Resources/translations/Arch_hr.ts index 147359f2ba..909a7c8407 100644 --- a/src/Mod/Arch/Resources/translations/Arch_hr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_hr.ts @@ -4,407 +4,362 @@ Arch - + Components Komponente - + Components of this object Komponente ovog objekta - + Axes Osi - + Create Axis Kreiraj os - + The intervals between axes iintervali između osi - + The angles of each axis kut svake osi - + The length of the axes Duljina osi - + The size of the axis bubbles Veličina mjehurića na osi - + Remove Ukloniti - + Add Dodaj - + Axis Osi - + Distance Udaljenost - + Angle Kut - - Building - Zgrada - - - + Type conversion Pretvaranje tipa - + Create Building Stvori zgradu - + Floor Kat - + removing sketch support to avoid cross-referencing uklanjanje podrške za skicu zbog izbjegavanja unakrznog referenciranja - - No objects are cut by the plane - Ni jedan objekt nije presječen sa ravninom - - - + is not closed nije zatvoren - + is not valid nije valjano - + doesn't contain any solid ne sadrži niti jedno čvrsto tijelo - + contains a non-closed solid Sadrži otvoreno čvrsto tijelo - + contains faces that are not part of any solid sadrži površine koje nisu dio niti jednog tijela - + Grouping Grupiranje - + Ungrouping Razgrupiranje - + Split Mesh Podijeli Mesh - + Mesh to Shape Mesh u oblik - + All good! no problems found Sve je dobro! Problemi nisu pronađeni - + Base component Temeljna komponenta - + Additions Dodatci - + Subtractions Oduzimanje - + Objects Objekti - + closing Sketch edit Zatvaranje uređivanja skice - + The height of this floor Visina ovog poda - + Roof Krov - + Create Roof Stvori krov - + Unable to create a roof Nemoguće kreirati krov - - The angle of this roof - Kut ovog krova - - - + The face number of the base object used to build this roof Broj plohe baznog objekta koji je korišten za izradu ovog krova - + Page Stranica - + View of Pogled od - + Create Section Plane Kreira ravninu presjeka - + The objects that must be considered by this section plane. Empty means all document Objekti koji moraju biti razmotreni sa oviom ravninom presjeka. Prazno razmatra sve objekte - - The display size of this section plane - Veličina prikaza ovoe ravnine presjeka - - - - No shape has been computed yet, select wireframe rendering and render again - Oblik još nije proračunat, odaberi "wireframe" renderiranje i pokušaj ponovo - - - + Skipping invalid object: Preskakanje neprailnog objekta: - - Site - Mjesto - - - + Create Site Stvori Mjesto - - Structure - Struktura - - - + Create Structure Stvori Strukturu - + The length of this element, if not based on a profile Duljina ovog elementa, ako se ne temelji na profilu - + The width of this element, if not based on a profile Širina ovog elementa, ako se ne temelji na profilu - + The height or extrusion depth of this element. Keep 0 for automatic Visina ili ekstruzija ovog elementa. Ostavi 0 za automatski - + Axes systems this structure is built on Koordinatni sustav na kojem se temelji struktura - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Normala za ekstruziju ovog objekta (ostavi (0,0,0) za automatsko) - + The element numbers to exclude when this structure is based on axes Broj elemenata za zanemariti kada se ova struktura temelji na osima - - Wall - Zid - - - + Create Wall Stvori zid - + WallTrace Putanja zida - + Wall options Opcije zida - + Width Širina - + Height Visina - + Alignment Poravnavanje - + The width of this wall. Not used if this wall is based on a face Širina ovog zida. Ne koristi se ako se zid temelji na plohi - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Visina ovog zida. Ostavi 0 za automatski odabir. Ne koristi se ako se zid temelji na čvrstom tijelu - + The alignment of this wall on its base object, if applicable Poravnavanje zida na njegovu bazu, ako je moguće - + Error: Invalid base object Greška: Navaljan temeljni objekt - + This mesh is an invalid solid Ova mreža nije ispravno tijelo - - Window - Prozor - - - + Create Window Napravi prozor - + the components of this window Komponente ovog prozora - + Edit Uredi - + Create/update component Kreiraj/osvježi komponentu - + Base 2D object Temeljni 2D objekt - + Wires Žice - + Create new component Kreiraj novu komponentu - + Name Ime - + Type Tip - + Thickness Debljina - + Z offset Z odmak @@ -419,71 +374,66 @@ datoteka %s je uspješno kreirana. - + Error: Couldn't determine character encoding Greška: Nije moguće odrediti način enkodiranja - + Couldn't locate IfcOpenShell Nemoguće pronaći IfcOpenShell - + IFC Schema not found, IFC import disabled. IFC Schema nije pronađena, IFC uvoz je onemogućen. - + successfully written uspješno zapisano - + The numbering style The numbering style - + removing sketch external references to avoid cross-referencing removing sketch external references to avoid cross-referencing - - Invalid cutplane - Invalid cutplane - - - + Add space boundary Add space boundary - + Remove space boundary Remove space boundary - + Please select a base object Please select a base object - + Fixtures Fixtures - + Armatures Armatures - + The placement of this group The placement of this group @@ -493,171 +443,146 @@ Frame - + Create Frame Create Frame - - Rebar - Rebar - - - + Create Rebar Create Rebar - + Please select a base face on a structural object Please select a base face on a structural object - + Please select a base object Please select a base object - - Section - Odsječak - - - + The placement of this object The placement of this object - + The terrain of this site The terrain of this site - + The address of this site The address of this site - + The geographic coordinates of this site The geographic coordinates of this site - + An url that shows this site in a mapping website An url that shows this site in a mapping website - - Space - Space - - - + Create Space Create Space - - A base shape defining this space - A base shape defining this space - - - + The objects that make the boundaries of this space object The objects that make the boundaries of this space object - - Stairs - Stairs - - - + Create Stairs Create Stairs - + The length of these stairs, if no baseline is defined The length of these stairs, if no baseline is defined - + The width of these stairs The width of these stairs - + The total height of these stairs The total height of these stairs - + The alignment of these stairs on their baseline, if applicable The alignment of these stairs on their baseline, if applicable - + The number of risers in these stairs The number of risers in these stairs - + The depth of the treads of these stairs The depth of the treads of these stairs - + The height of the risers of these stairs The height of the risers of these stairs - + The size of the nosing The size of the nosing - + The thickness of the treads The thickness of the treads - + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in - + The type of landings of these stairs The type of landings of these stairs - + The type of winders in these stairs The type of winders in these stairs - + The type of structure of these stairs The type of structure of these stairs - + The thickness of the massive structure or of the stringers The thickness of the massive structure or of the stringers - + The width of the stringers The width of the stringers - + The offset between the border of the stairs and the structure The offset between the border of the stairs and the structure @@ -672,139 +597,124 @@ Steel - + Structure options Structure options - + Preset Preset - + Length Dužina - + Rotate Rotiraj - + Con&tinue Con&tinue - + An optional extrusion path for this element An optional extrusion path for this element - + Armatures contained in this element Armatures contained in this element - - The role of this structural element - The role of this structural element - - - + The structural nodes of this element The structural nodes of this element - + Error: The base shape couldn't be extruded along this tool object Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape Couldn't compute a shape - + Merge Wall Merge Wall - + The selected wall contain no subwall to merge The selected wall contain no subwall to merge - + Please select only wall objects Please select only wall objects - + Merge Walls Merge Walls - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) - + Pick a face on an existing object or select a preset Pick a face on an existing object or select a preset - + Window options Window options - + The depth of the hole that this window makes in its host object. Keep 0 for automatic. The depth of the hole that this window makes in its host object. Keep 0 for automatic. - - an optional volume to be subtracted from hosts of this window - an optional volume to be subtracted from hosts of this window - - - + The width of this window (for preset windows only) The width of this window (for preset windows only) - + The height of this window (for preset windows only) The height of this window (for preset windows only) - + The normal direction of this window The normal direction of this window - - The role of this window - The role of this window - - - + Unable to create component Unable to create component @@ -818,46 +728,36 @@ - + IfcOpenShell not found or disabled, falling back on internal parser. IfcOpenShell not found or disabled, falling back on internal parser. - + Distances (mm) and angles (deg) between axes Distances (mm) and angles (deg) between axes - + Error computing the shape of this object Error computing the shape of this object - - StructuralSystem - StructuralSystem - - - + Create Structural System Create Structural System - - The role of this wall - The role of this wall - - - + Error: IfcOpenShell is not installed Error: IfcOpenShell is not installed - + Error: your IfcOpenShell version is too old Error: your IfcOpenShell version is too old @@ -870,16 +770,455 @@ Found a shape containing curves, triangulating + + + Invalid cutplane + + Invalid cutplane + + + + + No objects are cut by the plane + + No objects are cut by the plane + + + + + Object doesn't have settable IFC Attributes + Object doesn't have settable IFC Attributes + + + + Disabling Brep force flag of object + Disabling Brep force flag of object + + + + Enabling Brep force flag of object + Enabling Brep force flag of object + + + + The base object this component is built upon + The base object this component is built upon + + + + Other shapes that are appended to this object + Other shapes that are appended to this object + + + + Other shapes that are subtracted from this object + Other shapes that are subtracted from this object + + + + An optional description for this component + An optional description for this component + + + + An optional tag for this component + An optional tag for this component + + + + Custom IFC properties and attributes + Custom IFC properties and attributes + + + + A material for this object + A material for this object + + + + The role of this object + The role of this object + + + + Specifies if this object must move together when its host is moved + Specifies if this object must move together when its host is moved + + + + has no solid + has no solid + + + + has an invalid shape + has an invalid shape + + + + has a null shape + has a null shape + + + + Cutting + Cutting + + + + You must select a base object first! + You must select a base object first! + + + + Create Equipment + Create Equipment + + + + You must select exactly one base object + You must select exactly one base object + + + + The selected object must be a mesh + The selected object must be a mesh + + + + This mesh has more than 1000 facets. + This mesh has more than 1000 facets. + + + + This operation can take a long time. Proceed? + This operation can take a long time. Proceed? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + The mesh has more than 500 facets. This will take a couple of minutes... + + + + Create 3 views + Create 3 views + + + + an optional 2D shape representing a top view of this equipment + an optional 2D shape representing a top view of this equipment + + + + an optional 2D shape representing a front view of this equipment + an optional 2D shape representing a front view of this equipment + + + + an optional 2D shape representing a side view of this equipment + an optional 2D shape representing a side view of this equipment + + + + The model description of this equipment + The model description of this equipment + + + + The url of the product page of this equipment + The url of the product page of this equipment + + + + Create Panel + Create Panel + + + + Panel options + Panel options + + + + The thickness or extrusion depth of this element + The thickness or extrusion depth of this element + + + + The number of sheets to use + The number of sheets to use + + + + The offset between this panel and its baseline + The offset between this panel and its baseline + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + + + + Id + Id + + + + IdRel + IdRel + + + + If false, non-solids will be cut too, with possible wrong results. + If false, non-solids will be cut too, with possible wrong results. + + + + The display length of this section plane + The display length of this section plane + + + + The display height of this section plane + The display height of this section plane + + + + The size of the arrows of this section plane + The size of the arrows of this section plane + + + + The computed floor area of this space + The computed floor area of this space + + + + The finishing of the floor of this space + The finishing of the floor of this space + + + + The finishing of the walls of this space + The finishing of the walls of this space + + + + The finishing of the ceiling of this space + The finishing of the ceiling of this space + + + + Objects that are included inside this space, such as furniture + Objects that are included inside this space, such as furniture + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + + + + The name of the font + The name of the font + + + + The color of the area text + The color of the area text + + + + The size of the text font + The size of the text font + + + + The size of the first line of text + The size of the first line of text + + + + The space between the lines of text + The space between the lines of text + + + + The position of the text. Leave (0,0,0) for automatic position + The position of the text. Leave (0,0,0) for automatic position + + + + The justification of the text + The justification of the text + + + + The number of decimals to use for calculated texts + The number of decimals to use for calculated texts + + + + Show the unit suffix + Show the unit suffix + + + + A description of the standard profile this element is based upon + A description of the standard profile this element is based upon + + + + Sill height + Sill height + + + + CutVolume + CutVolume + + + + CutPlane + CutPlane + + + + PreviewCutVolume + PreviewCutVolume + + + + Cut Plane + Cut Plane + + + + Cut Plane options + Cut Plane options + + + + Wich side to cut + Wich side to cut + + + + Behind + Behind + + + + Front + Ispred + + + + Crossing point not found in profile. + + Crossing point not found in profile. + + + + + A list of angles for each roof pane + A list of angles for each roof pane + + + + A list of horizontal length projections for each roof pane + A list of horizontal length projections for each roof pane + + + + A list of IDs of relative profiles for each roof pane + A list of IDs of relative profiles for each roof pane + + + + A list of thicknesses for each roof pane + A list of thicknesses for each roof pane + + + + A list of overhangs for each roof pane + A list of overhangs for each roof pane + + + + A list of calculated heights for each roof pane + A list of calculated heights for each roof pane + + + + Angle (deg) + Angle (deg) + + + + Run (mm) + Run (mm) + + + + Thickness (mm) + Thickness (mm) + + + + Overhang (mm) + Overhang (mm) + + + + Height (mm) + Height (mm) + + + + Arch_3Views + + + 3 views from mesh + 3 views from mesh + + + + Creates 3 views (top, front, side) from a mesh-based object + Creates 3 views (top, front, side) from a mesh-based object + Arch_Add - + Add component Dodaj komponentu - + Adds the selected components to the active object Dodaje odabrane komponente aktivnom objektu @@ -887,12 +1226,12 @@ Arch_Axis - + Axis Osi - + Creates an axis system. Kreira novi koordinatni sustav. @@ -900,12 +1239,12 @@ Arch_Building - + Building Zgrada - + Creates a building object including selected objects. Stvara Zgradu, uključujući odabrane objekte. @@ -913,17 +1252,17 @@ Arch_Check - + Check Provjeri - + Checks the selected objects for problems Provjerava probleme na selektiranim objektima - + Explore the contents of an Ifc file Explore the contents of an Ifc file @@ -931,18 +1270,41 @@ Arch_CloseHoles - + Close holes Zatvori rupe - + Closes holes in open shapes, turning them solids Zatvara rupe u otvorenim oblicima i pretvara ih u 3D tijela - Arch_Fixture + Arch_CutPlane + + + Cut with plane + Cut with plane + + + + Cut an object with a plane + Cut an object with a plane + + + + Arch_Equipment + + + Equipment + Equipment + + + + Creates an equipment object from a selected object (Part or Mesh) + Creates an equipment object from a selected object (Part or Mesh) + Arch_Floor @@ -960,12 +1322,12 @@ Arch_Frame - + Frame Frame - + Creates a frame object from a planar 2D object and a profile Creates a frame object from a planar 2D object and a profile @@ -973,7 +1335,7 @@ Arch_IfcExplorer - + Ifc Explorer Ifc Explorer @@ -981,12 +1343,12 @@ Arch_MergeWalls - + Merge Walls Merge Walls - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -994,25 +1356,38 @@ Arch_MeshToShape - + Mesh to Shape Mesh u oblik - + Turns selected meshes into Part Shape objects Pretvara odabrane mreže u čvrste dijelove + + Arch_Panel + + + Panel + Panel + + + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + + Arch_Rebar - + Rebar Rebar - + Creates a Reinforcement bar from the selected face of a structural object Creates a Reinforcement bar from the selected face of a structural object @@ -1020,12 +1395,12 @@ Arch_Remove - + Remove component Ukloni komponentu - + Remove the selected components from their parents, or create a hole in a component Ukloni odabrane komponente iz njihovih roditelja, ili stvori rupu u komponenti @@ -1033,12 +1408,12 @@ Arch_RemoveShape - + Remove Shape from Arch Ukloni oblik iz Arch-a - + Removes cubic shapes from Arch components Uklanja prostorne oblika iz Arch komponenti @@ -1046,25 +1421,25 @@ Arch_Roof - + Roof Krov - - Creates a roof object from the selected face of an object - Kreira krov od selektirane plohe objekta + + Creates a roof object from the selected wire. + Creates a roof object from the selected wire. Arch_SectionPlane - + Section Plane Ravnina odjeljka - + Creates a section plane object, including the selected objects Kreira plohu presjeka, ukljućujući odabrane objekte @@ -1072,12 +1447,12 @@ Arch_SelectNonSolidMeshes - + Select non-manifold meshes Odaberite jednostruke MESH-eve - + Selects all non-manifold meshes from the document or from the selected groups Odabire sve jednostruke MESH-eve iz dokumenta ili iz odabrane grupe @@ -1085,12 +1460,12 @@ Arch_Site - + Site Mjesto - + Creates a site object including selected objects. Stvara Mjesto, uključujući odabrane objekte. @@ -1098,17 +1473,17 @@ Arch_Space - + Space Space - + Creates a space object from selected boundary objects Creates a space object from selected boundary objects - + Creates a stairs object Creates a stairs object @@ -1116,12 +1491,12 @@ Arch_SplitMesh - + Split Mesh Podijeli Mesh - + Splits selected meshes into independent components Dijeli odabrane MESH-eve u nezavisne komponente @@ -1129,7 +1504,7 @@ Arch_Stairs - + Stairs Stairs @@ -1137,12 +1512,12 @@ Arch_Structure - + Structure Struktura - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Stvara strukture objekta od nule ili od odabranog objekta (skica, žica, površina ili tijelo) @@ -1150,25 +1525,38 @@ Arch_Survey - + Survey Survey - + Starts survey Starts survey + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Toggle IFC Brep flag + + + + Force an object to be exported as Brep or not + Force an object to be exported as Brep or not + + Arch_Wall - + Wall Zid - + Creates a wall object from scratch or from a selected object (wire, face or solid) Stvara zid objekt od nule ili od odabranog objekta (žice, površine ili tijela) @@ -1176,12 +1564,12 @@ Arch_Window - + Window Prozor - + Creates a window object from a selected object (wire, rectangle or sketch) Kreira prozor od selektiranog objekta (žica, pravokutnik ili skica) @@ -1208,16 +1596,6 @@ IFC import IFC uvoz - - - Creates groups for each Arch object type - Kreira grupu za svaki tip Arch objekta - - - - Group components by types - Grupiraj komponente po tipovima - 2D rendering @@ -1244,22 +1622,22 @@ Označava koliko puta debljina linije mora biti primjenjena da bi se linija presjekla - + Width: Širina: - + Height: Duljina: - + Color: Color: - + Length: Duljina: @@ -1373,11 +1751,6 @@ Cut method Cut method - - - Import / export - Import / export - Check this to display debug messages while importing IFC files @@ -1390,74 +1763,44 @@ - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - - - - Force python parser - Force python parser - - - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - + Separate openings Separate openings - + If this is checked, object names will be prefixed with the IFC ID number If this is checked, object names will be prefixed with the IFC ID number - + Prefix names with ID number Prefix names with ID number - + Exclude list: Exclude list: - + A comma-separated list of Ifc entities to exclude from import A comma-separated list of Ifc entities to exclude from import - - Custom IFC schema (internal parser only) - Custom IFC schema (internal parser only) - - - + IFC export IFC export - + Scaling factor Scaling factor - - - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - - - - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - - - - Save a list of exported objects - Save a list of exported objects - Snap to baselines of Arch objects (override with CTRL) @@ -1474,7 +1817,7 @@ Walls - + mm mm @@ -1499,95 +1842,103 @@ Prozirnost: - - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - - - - Separate placements - Separate placements - - - - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - - - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. - - Force export as Breps - Force export as Breps - - - - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - - - - Join multi-solid objects - Join multi-solid objects - - - + Collada export Collada export - - WebGL export - WebGL export + + Hidden geomety pattern + Hidden geomety pattern - - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + This is the SVG stroke-dasharray property to apply to projections of hidden objects. - - Discretize wires - Discretize wires + + 30, 10 + 30, 10 + + + + Stairs + Stairs + + + + Number of steps: + Number of steps: + + + + Panels + Panels + + + + mm + mm + + + + Thickness + Debljina + + + + IFC / DAE / WebGL + IFC / DAE / WebGL + + + + Force export as Brep + Force export as Brep + + + + Workbench + + + Arch tools + Arch tools + + + + Draft tools + Draft tools + + + + Draft mod tools + Draft mod tools arch - - Arch tools - Alati Arch modula - - - - Draft tools - Alati Nacrta - - - - Draft mod tools - Alati za modificiranje nacrta - - - + &Architecture &Arhitektura - + &Draft &Nacrt - + Utilities Utilities - + Snapping Snapping diff --git a/src/Mod/Arch/Resources/translations/Arch_hu.qm b/src/Mod/Arch/Resources/translations/Arch_hu.qm index cf179e0c98..d880ddd1da 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_hu.qm and b/src/Mod/Arch/Resources/translations/Arch_hu.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_hu.ts b/src/Mod/Arch/Resources/translations/Arch_hu.ts index f2bbb51846..92269edd9c 100644 --- a/src/Mod/Arch/Resources/translations/Arch_hu.ts +++ b/src/Mod/Arch/Resources/translations/Arch_hu.ts @@ -4,407 +4,362 @@ Arch - + Components Összetevők - + Components of this object Az objektum elemei - + Axes Tengelyek - + Create Axis Tengely létrehozása - + The intervals between axes Tengelyek közötti meghatározott közök - + The angles of each axis Minden egyes tengely szöge - + The length of the axes A tengelyek hossza - + The size of the axis bubbles A tengely buborékok mérete - + Remove Törlés - + Add Hozzáad - + Axis Tengely - + Distance Távolság - + Angle Szög - - Building - Épület - - - + Type conversion Típuskonverzió - + Create Building Épület létrehozása - + Floor Szint - + removing sketch support to avoid cross-referencing Vázlat támogatás eltávolítása kereszthivatkozás elkerülése végett - - No objects are cut by the plane - Objektumok nem lettek kivágva a kivágással a síkkal - - - + is not closed nincs lezárva - + is not valid Érvénytelen - + doesn't contain any solid nem tartalmazhat semmilyen szilárd testet - + contains a non-closed solid le nem zárt szilárd testet tartalmaz - + contains faces that are not part of any solid tartalmaz felületet, amelyek nem tartoznak semmilyen szilárd testhez - + Grouping Csoportosítás - + Ungrouping Csoportbontás - + Split Mesh Háló osztása - + Mesh to Shape Hálókat alakzatokká - + All good! no problems found Minden jó! nincs probléma - + Base component Alap-összetevő - + Additions Kiegészítők - + Subtractions Kivonás - + Objects Objektumok - + closing Sketch edit Vázlat szerkesztés bezárása - + The height of this floor Ennek az emeletnek a magassága - + Roof Tető - + Create Roof Tető létrehozása - + Unable to create a roof Nem lehet létrehozni tetőt - - The angle of this roof - Ennek a tetőnek a szöge - - - + The face number of the base object used to build this roof A tető építő alap objektum felület száma - + Page Oldal - + View of Nézete a - + Create Section Plane Szakasz sík létrehozása - + The objects that must be considered by this section plane. Empty means all document Objektum a metszés nézethez. Üresen hagyva az egész dokumentumot jelent - - The display size of this section plane - Ennek a kiválasztott síknak a megjelenítési méretei - - - - No shape has been computed yet, select wireframe rendering and render again - Nincs alakzat számítva, jelölje ki a drótvázas renderelést és újra rendereljen - - - + Skipping invalid object: Érvénytelen objektum kihagyása: - - Site - Oldal - - - + Create Site Oldal létrehozása - - Structure - Felépítés - - - + Create Structure Struktúra létrehozása - + The length of this element, if not based on a profile Ennek az elemnek a hossza, ha nem profilon áll - + The width of this element, if not based on a profile Ennek az elemnek a szélessége, ha nem profilon áll - + The height or extrusion depth of this element. Keep 0 for automatic Ez az elem magassága vagy kihúzás nagysága. 0 megtartása automatikushoz - + Axes systems this structure is built on Ez a struktúrának erre a tengelyek rendszerre épül - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Ennek az objektumnak a normál kihúzás iránya (automatikus normál (0,0,0) megtartása) - + The element numbers to exclude when this structure is based on axes A kihúzandó elemek száma, ha az tengelyeken alapul - - Wall - Fal - - - + Create Wall Fal létrehozása - + WallTrace Faljelölés - + Wall options Fal beállítások - + Width Szélesség - + Height Magasság - + Alignment Igazítás - + The width of this wall. Not used if this wall is based on a face Ennek a falnak szélessége. Nem használatos, ha a fal egy felületen fekszik - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Ennek a falnak magassága. 0 érték akkor automatikus. Nem használja ha a fal alapja egy szilárd test - + The alignment of this wall on its base object, if applicable Ennek a falnak az igazítása az alapobjektumra, ha az elérhető - + Error: Invalid base object Hiba: Érvénytelen alap objektum - + This mesh is an invalid solid A háló egy érvénytelen szilárd test - - Window - Ablak - - - + Create Window Ablak létrehozása - + the components of this window Összetevők ebben az ablakban - + Edit Szerkesztés - + Create/update component Létrehozni/frissíteni összetevőt - + Base 2D object Alap 2D objektumot - + Wires Vonalak - + Create new component Új összetevő létrehozásához - + Name Név - + Type Típus - + Thickness Vastagság - + Z offset Z-eltolás @@ -419,71 +374,66 @@ a program sikeresen létrehozta a %s fájl. - + Error: Couldn't determine character encoding Hiba: Nem állapítható meg a karakterkódolás - + Couldn't locate IfcOpenShell Nem találta meg a IfcOpenShell - + IFC Schema not found, IFC import disabled. IFC-séma nem található, az IFC import letiltva - + successfully written írás sikeresen elvégezve - + The numbering style Számozási stíus - + removing sketch external references to avoid cross-referencing vázlat külső hivatkozások eltávolítása a kereszt hivatkozások elkerülése végett - - Invalid cutplane - Érvénytelen kivágási séma - - - + Add space boundary Hely határvonal hozzáadása - + Remove space boundary Távolítsa el a hely határvonalán - + Please select a base object Kérjük válassza ki az alap tárgyat - + Fixtures Berendezési tárgyak - + Armatures Armatúrák - + The placement of this group Ennek a csoportnak az elhelyezése @@ -493,321 +443,281 @@ Keret - + Create Frame Keret létrehozása - - Rebar - Újrahálózás - - - + Create Rebar Új háló létrehozása - + Please select a base face on a structural object Válasszon egy alap nézetet a strukturális objektumon - + Please select a base object Kérjük válassza ki az alapértelmezett tárgyat - - Section - Szakasz - - - + The placement of this object Ennek az objektumnak az elhelyezése - + The terrain of this site Domborzat, ezen az oldalon - + The address of this site Ennek az oldalnak a címe - + The geographic coordinates of this site Ennek az oldalnak a földrajzi koordinátái - + An url that shows this site in a mapping website Egy URL-cím ami leképezési honlapban jeleníti meg ezt az oldalt - - Space - Térköz - - - + Create Space Térköz létrehozása - - A base shape defining this space - Ezt a helyet meghatározó alap alakzat - - - + The objects that make the boundaries of this space object A tárgyakat, amelyek a térben lévő tárgyak határait alkotják - - Stairs - Lépcsők - - - + Create Stairs Lépcső létrehozása - + The length of these stairs, if no baseline is defined A lépcsők hosszai, ha alapvonal nem lett kijelölve - + The width of these stairs Lépcsők szélessége - + The total height of these stairs Ezeknek a lépcsőknek a teljes magassága - + The alignment of these stairs on their baseline, if applicable A lépcsők alapvonalhoz való igazítása, ha lehetséges - + The number of risers in these stairs A lépcsők emelkedése - + The depth of the treads of these stairs A lépcsők futófelület mélysége - + The height of the risers of these stairs A lépcsők emelkedési magassága - + The size of the nosing Az orommagassága - + The thickness of the treads A futófelület vastagsága - + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in Blondel aránya 62 és 64cm /24.5 és 25.5 in/ között kell lennie - + The type of landings of these stairs A lépcsők pihenőrész csatlakozása - + The type of winders in these stairs A lépcsők befordulás típusa - + The type of structure of these stairs a lépcsők szerkezetének típusa - + The thickness of the massive structure or of the stringers A masszív szerkezet vagy az aljzat húrok vastagsága - + The width of the stringers - The width of the stringers + A vázhúrok szélessége - + The offset between the border of the stairs and the structure - The offset between the border of the stairs and the structure + Az eltolás a lépcső szegélye és a szerkezet között Wood - Wood + Fa Steel - Steel + Acél - + Structure options - Structure options + Szerkezet lehetőségek - + Preset - Preset + Előre beállított - + Length Hossz - + Rotate Forgatás - + Con&tinue - Con&tinue + Folytatás - + An optional extrusion path for this element - An optional extrusion path for this element + Egy választható kihúzási útvonalat ehhez az elemhez - + Armatures contained in this element - Armatures contained in this element + Ebben az elemben található szerkezeti elemek - - The role of this structural element - The role of this structural element - - - + The structural nodes of this element - The structural nodes of this element + Ennek az elemnek a szerkezeti csomópontjai - + Error: The base shape couldn't be extruded along this tool object - Error: The base shape couldn't be extruded along this tool object + Hiba: Az alap alakzatot nem lehet kihúzni ennek az eszköz objektumnak a mentén - + Couldn't compute a shape - Couldn't compute a shape + Nem tudott létrehozni alakzatot - + Merge Wall - Merge Wall + Fal egyesítése - + The selected wall contain no subwall to merge - The selected wall contain no subwall to merge + A kijelölt fal nem tartalmaz összeegyeztethető fal részleteket - + Please select only wall objects - Please select only wall objects + Kérem csak fal objektumokat válasszon ki - + Merge Walls - Merge Walls + Falak egyesítése - + The length of this wall. Not used if this wall is based on an underlying object - The length of this wall. Not used if this wall is based on an underlying object + Ez a fal hossza. Nem használható, ha ennek a falnak alapjául más objektum szolgál - + The face number of the base object used to build this wall - The face number of the base object used to build this wall + Az alap objektum felület száma a fal felépítéséhez használt - + The offset between this wall and its baseline (only for left and right alignments) - The offset between this wall and its baseline (only for left and right alignments) + Ennek a falnak és az alap vonalának az eltolása (csak a bal- és a jobb nyomvonal igazításhoz) - + Pick a face on an existing object or select a preset - Pick a face on an existing object or select a preset + Válasszon egy felületet a meglévő objektumon vagy válasszon egy előre beállítottat - + Window options - Window options + Ablakbeállítások - + The depth of the hole that this window makes in its host object. Keep 0 for automatic. - The depth of the hole that this window makes in its host object. Keep 0 for automatic. + A furat mélysége melyet ez az ablak képez a hordozó felületen. Automatikushoz hagyja 0-án. - - an optional volume to be subtracted from hosts of this window - an optional volume to be subtracted from hosts of this window - - - + The width of this window (for preset windows only) - The width of this window (for preset windows only) + Az ablak szélessége (csak előre beállított ablakok) - + The height of this window (for preset windows only) - The height of this window (for preset windows only) + Az ablak szélessége (csak előre beállított ablakok) - + The normal direction of this window - The normal direction of this window + Ez az ablak normál iránya - - The role of this window - The role of this window - - - + Unable to create component - Unable to create component + Nem lehet létrehozni összetevőt @@ -818,68 +728,497 @@ - + IfcOpenShell not found or disabled, falling back on internal parser. IfcOpenShell not found or disabled, falling back on internal parser. - + Distances (mm) and angles (deg) between axes - Distances (mm) and angles (deg) between axes + Tengelyek közti távolságok (mm) és szögek (fokban) - + Error computing the shape of this object - Error computing the shape of this object + Hiba a tárgy alakjának számítása közben - - StructuralSystem - StructuralSystem - - - + Create Structural System - Create Structural System + Szerkezeti rendszer létrehozása - - The role of this wall - The role of this wall - - - + Error: IfcOpenShell is not installed - Error: IfcOpenShell is not installed + Hiba: IfcOpenShell nincs telepítve - + Error: your IfcOpenShell version is too old - Error: your IfcOpenShell version is too old + Hiba: a IfcOpenShell verziója túl régi Found a shape containing curves, triangulating - Found a shape containing curves, triangulating + Találtam egy görbét tartalmazó alakzatot, háromszögelés + + + Invalid cutplane + + Invalid cutplane + + + + + No objects are cut by the plane + + No objects are cut by the plane + + + + + Object doesn't have settable IFC Attributes + Object doesn't have settable IFC Attributes + + + + Disabling Brep force flag of object + Disabling Brep force flag of object + + + + Enabling Brep force flag of object + Enabling Brep force flag of object + + + + The base object this component is built upon + The base object this component is built upon + + + + Other shapes that are appended to this object + Other shapes that are appended to this object + + + + Other shapes that are subtracted from this object + Other shapes that are subtracted from this object + + + + An optional description for this component + An optional description for this component + + + + An optional tag for this component + An optional tag for this component + + + + Custom IFC properties and attributes + Custom IFC properties and attributes + + + + A material for this object + A material for this object + + + + The role of this object + The role of this object + + + + Specifies if this object must move together when its host is moved + Specifies if this object must move together when its host is moved + + + + has no solid + has no solid + + + + has an invalid shape + has an invalid shape + + + + has a null shape + has a null shape + + + + Cutting + Cutting + + + + You must select a base object first! + You must select a base object first! + + + + Create Equipment + Create Equipment + + + + You must select exactly one base object + You must select exactly one base object + + + + The selected object must be a mesh + The selected object must be a mesh + + + + This mesh has more than 1000 facets. + This mesh has more than 1000 facets. + + + + This operation can take a long time. Proceed? + This operation can take a long time. Proceed? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + The mesh has more than 500 facets. This will take a couple of minutes... + + + + Create 3 views + Create 3 views + + + + an optional 2D shape representing a top view of this equipment + an optional 2D shape representing a top view of this equipment + + + + an optional 2D shape representing a front view of this equipment + an optional 2D shape representing a front view of this equipment + + + + an optional 2D shape representing a side view of this equipment + an optional 2D shape representing a side view of this equipment + + + + The model description of this equipment + The model description of this equipment + + + + The url of the product page of this equipment + The url of the product page of this equipment + + + + Create Panel + Create Panel + + + + Panel options + Panel options + + + + The thickness or extrusion depth of this element + The thickness or extrusion depth of this element + + + + The number of sheets to use + The number of sheets to use + + + + The offset between this panel and its baseline + The offset between this panel and its baseline + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + + + + Id + Id + + + + IdRel + IdRel + + + + If false, non-solids will be cut too, with possible wrong results. + If false, non-solids will be cut too, with possible wrong results. + + + + The display length of this section plane + The display length of this section plane + + + + The display height of this section plane + The display height of this section plane + + + + The size of the arrows of this section plane + The size of the arrows of this section plane + + + + The computed floor area of this space + The computed floor area of this space + + + + The finishing of the floor of this space + The finishing of the floor of this space + + + + The finishing of the walls of this space + The finishing of the walls of this space + + + + The finishing of the ceiling of this space + The finishing of the ceiling of this space + + + + Objects that are included inside this space, such as furniture + Objects that are included inside this space, such as furniture + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + + + + The name of the font + The name of the font + + + + The color of the area text + The color of the area text + + + + The size of the text font + The size of the text font + + + + The size of the first line of text + The size of the first line of text + + + + The space between the lines of text + The space between the lines of text + + + + The position of the text. Leave (0,0,0) for automatic position + The position of the text. Leave (0,0,0) for automatic position + + + + The justification of the text + The justification of the text + + + + The number of decimals to use for calculated texts + The number of decimals to use for calculated texts + + + + Show the unit suffix + Show the unit suffix + + + + A description of the standard profile this element is based upon + A description of the standard profile this element is based upon + + + + Sill height + Sill height + + + + CutVolume + CutVolume + + + + CutPlane + CutPlane + + + + PreviewCutVolume + PreviewCutVolume + + + + Cut Plane + Cut Plane + + + + Cut Plane options + Cut Plane options + + + + Wich side to cut + Wich side to cut + + + + Behind + Behind + + + + Front + Elölnézet + + + + Crossing point not found in profile. + + Crossing point not found in profile. + + + + + A list of angles for each roof pane + A list of angles for each roof pane + + + + A list of horizontal length projections for each roof pane + A list of horizontal length projections for each roof pane + + + + A list of IDs of relative profiles for each roof pane + A list of IDs of relative profiles for each roof pane + + + + A list of thicknesses for each roof pane + A list of thicknesses for each roof pane + + + + A list of overhangs for each roof pane + A list of overhangs for each roof pane + + + + A list of calculated heights for each roof pane + A list of calculated heights for each roof pane + + + + Angle (deg) + Angle (deg) + + + + Run (mm) + Run (mm) + + + + Thickness (mm) + Thickness (mm) + + + + Overhang (mm) + Overhang (mm) + + + + Height (mm) + Height (mm) + + + + Arch_3Views + + + 3 views from mesh + 3 views from mesh + + + + Creates 3 views (top, front, side) from a mesh-based object + Creates 3 views (top, front, side) from a mesh-based object + Arch_Add - + Add component Összetevő hozzáadása - + Adds the selected components to the active object A kijelölt összetevőket hozzáadja az aktív objektumhoz @@ -887,12 +1226,12 @@ Arch_Axis - + Axis Tengely - + Creates an axis system. Létrehoz egy tengely rendszert. @@ -900,12 +1239,12 @@ Arch_Building - + Building Épület - + Creates a building object including selected objects. Létrehoz egy épület objektumot, beleértve a kijelölt objektumokat. @@ -913,36 +1252,59 @@ Arch_Check - + Check Ellenőrzés - + Checks the selected objects for problems Ellenőrzi a kijelölt objektumok problémáit - + Explore the contents of an Ifc file - Explore the contents of an Ifc file + Fedezze fel az Ifc fájl tartalmát Arch_CloseHoles - + Close holes Lyukak bezárása - + Closes holes in open shapes, turning them solids Bezárja a nyitott alakzatokat, szilárd testé változtatja azokat - Arch_Fixture + Arch_CutPlane + + + Cut with plane + Cut with plane + + + + Cut an object with a plane + Cut an object with a plane + + + + Arch_Equipment + + + Equipment + Equipment + + + + Creates an equipment object from a selected object (Part or Mesh) + Creates an equipment object from a selected object (Part or Mesh) + Arch_Floor @@ -960,59 +1322,72 @@ Arch_Frame - + Frame Keret - + Creates a frame object from a planar 2D object and a profile - Creates a frame object from a planar 2D object and a profile + Létrehoz egy tárgy formát a sík 2D tárgyból és körvonalaiból Arch_IfcExplorer - + Ifc Explorer - Ifc Explorer + IFC Böngésző Arch_MergeWalls - + Merge Walls - Merge Walls + Falak egyesítése - + Merges the selected walls, if possible - Merges the selected walls, if possible + Egyesíti a kijelölt falakat, ha lehetséges Arch_MeshToShape - + Mesh to Shape Hálókat alakzatokká - + Turns selected meshes into Part Shape objects A kiválasztott hálókat alakzat objektumokká alakítja + + Arch_Panel + + + Panel + Panel + + + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + + Arch_Rebar - + Rebar Újrahálózás - + Creates a Reinforcement bar from the selected face of a structural object Creates a Reinforcement bar from the selected face of a structural object @@ -1020,12 +1395,12 @@ Arch_Remove - + Remove component Összetevő törlése - + Remove the selected components from their parents, or create a hole in a component A kijelölt alkatrészek eltávolítása a szülőktől, vagy egy lyuk létrehozása alkatrészen @@ -1033,12 +1408,12 @@ Arch_RemoveShape - + Remove Shape from Arch Alakzat elhagyása az Arch-ból - + Removes cubic shapes from Arch components Eltávolítja a harmadfokú alakzatokat az Arch alkatrészekből @@ -1046,25 +1421,25 @@ Arch_Roof - + Roof Tető - - Creates a roof object from the selected face of an object - Létrehoz egy tető-objektumot a kijelölt objektum felületről + + Creates a roof object from the selected wire. + Creates a roof object from the selected wire. Arch_SectionPlane - + Section Plane Rész sík - + Creates a section plane object, including the selected objects Létrehoz egy szakasz sík objektumot, beleértve a kijelölt objektumokat @@ -1072,12 +1447,12 @@ Arch_SelectNonSolidMeshes - + Select non-manifold meshes Válassza ki a nem-sokrétű hálózatot - + Selects all non-manifold meshes from the document or from the selected groups Kiválasztja az összes nem-sokrétű hálózatot a dokumentumból vagy a kijelölt csoportokból @@ -1085,12 +1460,12 @@ Arch_Site - + Site Oldal - + Creates a site object including selected objects. Létrehoz egy Oldal objektumot, beleértve a kijelölt objektumokat. @@ -1098,17 +1473,17 @@ Arch_Space - + Space Térköz - + Creates a space object from selected boundary objects Creates a space object from selected boundary objects - + Creates a stairs object Creates a stairs object @@ -1116,12 +1491,12 @@ Arch_SplitMesh - + Split Mesh Háló osztása - + Splits selected meshes into independent components A kiválasztott hálót független összetevőkre osztja @@ -1129,7 +1504,7 @@ Arch_Stairs - + Stairs Lépcsők @@ -1137,12 +1512,12 @@ Arch_Structure - + Structure Felépítés - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Létrehoz egy objektum struktúrát vázlatból vagy egy kijelölt objektumból (vázlat, vonal, felület vagy szilárd test) @@ -1150,25 +1525,38 @@ Arch_Survey - + Survey Survey - + Starts survey Starts survey + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Toggle IFC Brep flag + + + + Force an object to be exported as Brep or not + Force an object to be exported as Brep or not + + Arch_Wall - + Wall Fal - + Creates a wall object from scratch or from a selected object (wire, face or solid) Létrehoz egy falat objektumot vázlatból vagy egy kijelölt objektumból (vonal, felület vagy test) @@ -1176,12 +1564,12 @@ Arch_Window - + Window Ablak - + Creates a window object from a selected object (wire, rectangle or sketch) Ablak objektumot hoz létre a kijelölt objektumból (vonalas, téglalap vagy vázlat) @@ -1208,16 +1596,6 @@ IFC import IFC-adatok importálása - - - Creates groups for each Arch object type - Minden egyes Terv objektumtípusra csoportot hoz létre - - - - Group components by types - Csoport összetevők típus szerint - 2D rendering @@ -1244,22 +1622,22 @@ Itt adható meg, a látható vonal vastagságból hányat kell alkalmazni a kivágás végrehalytásához - + Width: Szélesség: - + Height: Magasság: - + Color: Color: - + Length: Hossz: @@ -1373,11 +1751,6 @@ Cut method Cut method - - - Import / export - Import / export - Check this to display debug messages while importing IFC files @@ -1390,74 +1763,44 @@ - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - - - - Force python parser - Force python parser - - - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - + Separate openings Separate openings - + If this is checked, object names will be prefixed with the IFC ID number If this is checked, object names will be prefixed with the IFC ID number - + Prefix names with ID number Prefix names with ID number - + Exclude list: Exclude list: - + A comma-separated list of Ifc entities to exclude from import A comma-separated list of Ifc entities to exclude from import - - Custom IFC schema (internal parser only) - Custom IFC schema (internal parser only) - - - + IFC export IFC export - + Scaling factor Scaling factor - - - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - - - - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - - - - Save a list of exported objects - Save a list of exported objects - Snap to baselines of Arch objects (override with CTRL) @@ -1474,7 +1817,7 @@ Walls - + mm mm @@ -1499,95 +1842,103 @@ Átlátszóság: - - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - - - - Separate placements - Separate placements - - - - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - - - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. - - Force export as Breps - Force export as Breps - - - - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - - - - Join multi-solid objects - Join multi-solid objects - - - + Collada export Collada export - - WebGL export - WebGL export + + Hidden geomety pattern + Hidden geomety pattern - - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + This is the SVG stroke-dasharray property to apply to projections of hidden objects. - - Discretize wires - Discretize wires + + 30, 10 + 30, 10 + + + + Stairs + Lépcsők + + + + Number of steps: + Number of steps: + + + + Panels + Panels + + + + mm + mm + + + + Thickness + Vastagság + + + + IFC / DAE / WebGL + IFC / DAE / WebGL + + + + Force export as Brep + Force export as Brep + + + + Workbench + + + Arch tools + Arch tools + + + + Draft tools + Draft tools + + + + Draft mod tools + Draft mod tools arch - - Arch tools - Szerkesztési eszközök - - - - Draft tools - Rajzolási eszközök - - - - Draft mod tools - Tervezési mód eszközök - - - + &Architecture &Architektúra - + &Draft - Tervezés &D + Vázrajz - + Utilities Utilities - + Snapping Snapping diff --git a/src/Mod/Arch/Resources/translations/Arch_it.qm b/src/Mod/Arch/Resources/translations/Arch_it.qm index e0386193e2..0b4dae4c48 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_it.qm and b/src/Mod/Arch/Resources/translations/Arch_it.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_it.ts b/src/Mod/Arch/Resources/translations/Arch_it.ts index f6fb8a0b50..00bb02584a 100644 --- a/src/Mod/Arch/Resources/translations/Arch_it.ts +++ b/src/Mod/Arch/Resources/translations/Arch_it.ts @@ -4,407 +4,362 @@ Arch - + Components Componenti - + Components of this object Componenti di questo oggetto - + Axes Assi - + Create Axis Crea Asse - + The intervals between axes Gli intervalli tra gli assi - + The angles of each axis Gli angoli di ciascun asse - + The length of the axes La lunghezza degli assi - + The size of the axis bubbles La dimensione delle bolle asse - + Remove Rimuovi - + Add Aggiungi - + Axis Asse - + Distance Distanza - + Angle Angolo - - Building - Edificio - - - + Type conversion Conversione di tipo - + Create Building Crea Edificio - + Floor Piano - + removing sketch support to avoid cross-referencing - rimozione di sketch di supporto per evitare riferimenti incrociati + rimozione degli sketch di supporto per evitare riferimenti incrociati - - No objects are cut by the plane - Nessun oggetto è stato tagliato dal piano - - - + is not closed non è chiuso - + is not valid non è valido - + doesn't contain any solid - non contiene alcun solido + non contiene nessun solido - + contains a non-closed solid contiene un solido non chiuso - + contains faces that are not part of any solid - contiene facce che non fanno parte di nessun solido + contiene delle facce che non fanno parte di nessun solido - + Grouping Raggruppa - + Ungrouping Separa - + Split Mesh Dividi Mesh - + Mesh to Shape Da Mesh a Forma - + All good! no problems found - Tutto bene! nessun problema riscontrato + Tutto bene! Nessun problema riscontrato - + Base component Componente base - + Additions Aggiunte - + Subtractions Sottrazioni - + Objects Oggetti - + closing Sketch edit Chiudi modifica Sketch - + The height of this floor L'altezza di questo piano - + Roof Tetto - + Create Roof Crea Tetto - + Unable to create a roof Impossibile creare un tetto - - The angle of this roof - L'angolo di questo tetto - - - + The face number of the base object used to build this roof Il numero di faccia dell'oggetto di base utilizzata per costruire questo tetto - + Page Pagina - + View of Vista di - + Create Section Plane Crea Piano di Sezione - + The objects that must be considered by this section plane. Empty means all document Gli oggetti che devono essere considerati da questo piano di sezione. Vuoto significa tutto il documento - - The display size of this section plane - La dimensione di visualizzazione di questo piano di sezione - - - - No shape has been computed yet, select wireframe rendering and render again - Nessuna forma è stata calcolata ancora, seleziona rendering wireframe e eseguire il render di nuovo - - - + Skipping invalid object: Saltare oggetto non valido: - - Site - Sito - - - + Create Site Crea Sito - - Structure - Struttura - - - + Create Structure Crea Struttura - + The length of this element, if not based on a profile - La lunghezza di questo elemento, se non si basa su un profilo + La lunghezza di questo elemento, se non è basato su un profilo - + The width of this element, if not based on a profile - La larghezza di questo elemento, se non si basa su un profilo + La larghezza di questo elemento, se non è basato su un profilo - + The height or extrusion depth of this element. Keep 0 for automatic L'altezza o la profondità di estrusione di questo elemento. Lasciare 0 per automatico - + Axes systems this structure is built on - Sistemi di assi su cui questa struttura è costruita + Sistemi di assi su cui è costruita questa struttura - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - La direzione di estrusione normale di questo oggetto (lasciare (0, 0,0) per normale automatica) + La direzione di estrusione normale di questo oggetto (lasciare (0, 0,0) per normale in automatico) - + The element numbers to exclude when this structure is based on axes - I numeri dell'elemento da escludere quando questa struttura è basata su assi + Il numero d'ordine degli elementi da escludere quando questa struttura è basata su assi - - Wall - Parete - - - + Create Wall Crea Parete - + WallTrace Traccia parete - + Wall options Opzioni Parete - + Width Larghezza - + Height Altezza - + Alignment Allineamento - + The width of this wall. Not used if this wall is based on a face - La larghezza di questa parete. Non usato se questa parete è basata su una faccia + La larghezza di questa parete. Non è usata se questa parete è basata su una faccia - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - L'altezza di questa parete. Lasciare 0 per automatico. Non usato se questa parete è basata su un solido + L'altezza di questa parete. Lasciare 0 per automatico. Non usata se questa parete è basata su un solido - + The alignment of this wall on its base object, if applicable L'allineamento di questa parete sul suo oggetto di base, se applicabile - + Error: Invalid base object Errore: Oggetto di base non valido - + This mesh is an invalid solid Questa mesh non è un solido valido - - Window - Finestra - - - + Create Window Crea Finestra - + the components of this window i componenti di questa finestra - + Edit Modifica - + Create/update component Crea o aggiorna componente - + Base 2D object Oggetto 2D base - + Wires - Wire + Polilinea - + Create new component Crea nuovo componente - + Name Nome - + Type Tipo - + Thickness Spessore - + Z offset Offset Z @@ -419,72 +374,67 @@ file %s creato con successo. - + Error: Couldn't determine character encoding Errore: impossibile determinare la codifica dei caratteri - + Couldn't locate IfcOpenShell Impossibile localizzare IfcOpenShell - + IFC Schema not found, IFC import disabled. Schema IFC non trovato, importazione IFC disabilitata. - + successfully written scritto correttamente - + The numbering style Lo stile di numerazione - + removing sketch external references to avoid cross-referencing Rimuove i riferimenti esterni dello sketch per evitare i riferimenti incrociati - - Invalid cutplane - Piano di taglio non valido - - - + Add space boundary Aggiungi limite di spazio - + Remove space boundary - Rimuovil limite di spazio + Rimuovi il limite di spazio - + Please select a base object Selezionare un oggetto base - + Fixtures - Fixtures + Infissi - + Armatures Armature - + The placement of this group Il posizionamento di questo gruppo @@ -494,170 +444,145 @@ Telaio - + Create Frame - Create Frame + Crea Telaio - - Rebar - Armatura - - - + Create Rebar Crea Armatura - + Please select a base face on a structural object Selezionare una faccia di base su un oggetto strutturale - + Please select a base object Selezionare un oggetto base - - Section - Sezione - - - + The placement of this object Il posizionamento di questo oggetto - + The terrain of this site Il terreno di questo sito - + The address of this site L'indirizzo di questo sito - + The geographic coordinates of this site Le coordinate geografiche di questo sito - + An url that shows this site in a mapping website Un indirizzo che indica questo sito in un sito di mappatura - - Space - Spazio - - - + Create Space Crea spazio - - A base shape defining this space - Una forma di base che definisce questo spazio - - - + The objects that make the boundaries of this space object - The objects that make the boundaries of this space object + Gli oggetti che creano i contorni di questo oggetto Spazio - - Stairs - Scale - - - + Create Stairs Crea scale - + The length of these stairs, if no baseline is defined - La lunghezza di queste scale, se nessun linea guida è definita + La lunghezza di queste scale, se non è definita nessuna linea guida - + The width of these stairs La larghezza di queste scale - + The total height of these stairs L'altezza totale di queste scale - + The alignment of these stairs on their baseline, if applicable L'allineamento di queste scale sulla loro linea guida, se applicabile - + The number of risers in these stairs - Il numero delle alzate in queste scale + Il numero di alzate in queste scale - + The depth of the treads of these stairs - The depth of the treads of these stairs + La profondità della pedata di queste scale - + The height of the risers of these stairs - The height of the risers of these stairs + L'altezza delle alzate di queste scale - + The size of the nosing - The size of the nosing + La dimensione della sporgenza - + The thickness of the treads - The thickness of the treads + Lo spessore della pedata - + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in Il rapporto di Blondel, deve essere compreso tra 62 e 64 cm o 24,5 e 25,5 pollice - + The type of landings of these stairs - The type of landings of these stairs + Il tipo di pianerottoli di queste scale - + The type of winders in these stairs - The type of winders in these stairs + Il tipo di rampa curva in queste scale - + The type of structure of these stairs Il tipo di struttura di queste scale - + The thickness of the massive structure or of the stringers - The thickness of the massive structure or of the stringers + Lo spessore della struttura massiccia o dei montanti - + The width of the stringers - The width of the stringers + La larghezza delle traversine - + The offset between the border of the stairs and the structure L'offset tra il confine delle scale e la struttura @@ -672,139 +597,124 @@ Acciaio - + Structure options Opzioni struttura - + Preset Preimpostato - + Length Lunghezza - + Rotate Ruota - + Con&tinue Con&tinua - + An optional extrusion path for this element Un percorso di estrusione opzionale per questo elemento - + Armatures contained in this element Armature contenute in questo elemento - - The role of this structural element - Il ruolo di questo elemento strutturale - - - + The structural nodes of this element I nodi strutturali di questo elemento - + Error: The base shape couldn't be extruded along this tool object Errore: La forma base non poteva essere estrusa lungo questo oggetto strumento - + Couldn't compute a shape Non è possibile computare una forma - + Merge Wall - Unisci parete + Unisci pareti - + The selected wall contain no subwall to merge - La parete selezionato non contenere nessun sotto-muro da unire + La parete selezionata non contiene nessun sotto-muro da unire - + Please select only wall objects - Selezionare solo gli oggetti parete + Seleziona solo gli oggetti parete - + Merge Walls Unisci pareti - + The length of this wall. Not used if this wall is based on an underlying object La lunghezza di questa parete. Non usato se questa parete è basata su un oggetto sottostante - + The face number of the base object used to build this wall - The face number of the base object used to build this wall + Il numero di faccia dell'oggetto base utilizzato per costruire questo muro - + The offset between this wall and its baseline (only for left and right alignments) L'offset tra questa parete e la linea guida (solo per gli allineamenti destro e sinistro) - + Pick a face on an existing object or select a preset - Pick a face on an existing object or select a preset + Scegli una faccia su un oggetto esistente o selezionane uno preimpostato - + Window options Opzioni finestra - + The depth of the hole that this window makes in its host object. Keep 0 for automatic. - The depth of the hole that this window makes in its host object. Keep 0 for automatic. + La profondità del foro che questa finestra crea nel suo oggetto ospitante. Lascia 0 per automatico. - - an optional volume to be subtracted from hosts of this window - an optional volume to be subtracted from hosts of this window - - - + The width of this window (for preset windows only) - La larghezza della finestra (solo per finestre preimpostate) + La larghezza della finestra (solo per le finestre preimpostate) - + The height of this window (for preset windows only) - L'altezza della finestra (solo per finestre preimpostate) + L'altezza della finestra (solo per le finestre preimpostate) - + The normal direction of this window Direzione normale di questa finestra - - The role of this window - Il ruolo di questa finestra - - - + Unable to create component Impossibile creare il componente @@ -816,44 +726,34 @@ pycollada non trovato, il supporto a collada è disabilitato. - + IfcOpenShell not found or disabled, falling back on internal parser. IfcOpenShell non trovato o disabilitato, si ripiega sul parser interno. - + Distances (mm) and angles (deg) between axes - Distances (mm) and angles (deg) between axes + Distanze (mm) ed angoli (gradi) tra gli assi - + Error computing the shape of this object - Error computing the shape of this object + Errore di calcolo della forma di questo oggetto - - StructuralSystem - StructuralSystem - - - + Create Structural System - Create Structural System + Crea sistema strutturale - - The role of this wall - The role of this wall - - - + Error: IfcOpenShell is not installed Errore: IfcOpenShell non è installato - + Error: your IfcOpenShell version is too old Errore: la versione IfcOpenShell è troppo vecchia @@ -862,19 +762,458 @@ Found a shape containing curves, triangulating - Found a shape containing curves, triangulating + Trovata una forma contenente curve, triangolazione + + + Invalid cutplane + + Piano di taglio non valido + + + + + No objects are cut by the plane + + Non ci sono oggetti tagliati dal piano + + + + + Object doesn't have settable IFC Attributes + L'oggetto non ha attributi IFC impostabili + + + + Disabling Brep force flag of object + Disabilita la rappresentazione Brep forzata dell'oggetto + + + + Enabling Brep force flag of object + Abilita la rappresentazione Brep forzata dell'oggetto + + + + The base object this component is built upon + L'oggetto su cui si basa questo componente + + + + Other shapes that are appended to this object + Altre forme che vengono aggiunte a questo oggetto + + + + Other shapes that are subtracted from this object + Altre forme che sono sottratte da questo oggetto + + + + An optional description for this component + Una descrizione facoltativa per questo componente + + + + An optional tag for this component + Un tag opzionale per questo componente + + + + Custom IFC properties and attributes + Attributi e proprietà IFC personalizzate + + + + A material for this object + Un materiale per questo oggetto + + + + The role of this object + Il ruolo di questo oggetto + + + + Specifies if this object must move together when its host is moved + Specifica se questo oggetto deve essere spostato con il suo ospite quando quest'ultimo viene spostato + + + + has no solid + non ha nessun solido + + + + has an invalid shape + ha una forma non valida + + + + has a null shape + ha una forma nulla + + + + Cutting + Taglio + + + + You must select a base object first! + È necessario selezionare prima un oggetto base! + + + + Create Equipment + Crea Accessorio + + + + You must select exactly one base object + È necessario selezionare un solo oggetto base + + + + The selected object must be a mesh + L'oggetto selezionato deve essere mesh + + + + This mesh has more than 1000 facets. + Questa mesh ha più di 1000 sfaccettature. + + + + This operation can take a long time. Proceed? + Questa operazione può richiedere molto tempo. Procedere? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + La mesh ha più di 500 sfaccettature. Questo richiederà alcuni minuti... + + + + Create 3 views + Crea 3 viste + + + + an optional 2D shape representing a top view of this equipment + una opzionale vista 2D dall'alto di questo arredo + + + + an optional 2D shape representing a front view of this equipment + una opzionale vista 2D frontale di questo arredo + + + + an optional 2D shape representing a side view of this equipment + una opzionale vista 2D laterale di questo arredo + + + + The model description of this equipment + La descrizione del modello di questo arredo + + + + The url of the product page of this equipment + L'url della pagina del prodotto di questo accessorio + + + + Create Panel + Crea pannello + + + + Panel options + Opzioni del pannello + + + + The thickness or extrusion depth of this element + La profondità o lo spessore di estrusione di questo elemento + + + + The number of sheets to use + Il numero di fogli da utilizzare + + + + The offset between this panel and its baseline + Lo scostamento tra questo pannello e la sua linea di base + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Parametri del profilo del tetto: +* Angle : pendenza in gradi rispetto all'orizzontale. +* Run : proiezione orizzontale della lunghezza della falda. +* Thickness : spessore della falda. +* Overhang : sbalzo della falda, cornicione, proiezione orizzontale della lunghezza. +* Height : altezza del colmo (calcolata automaticamente) +* IdRel : Id relativo per i calcoli automatici. +--- +Se Angle = 0 e Run = 0 allora il profilo è identico al profilo relativo. +Se Angle = 0 allora l'angolo viene calcolato in modo che l'altezza sia la stessa del profilo relativo. +Se Run = 0 allora Run è calcolato in modo che l'altezza sia la stessa del profilo relativo. + + + + Id + Id + + + + IdRel + IdRel + + + + If false, non-solids will be cut too, with possible wrong results. + Se false, verranno tagliati anche i non solidi, con possibili risultati sbagliati. + + + + The display length of this section plane + La lunghezza di visualizzazione di questo piano di sezione + + + + The display height of this section plane + L'altezza di visualizzazione di questo piano di sezione + + + + The size of the arrows of this section plane + La dimensione delle frecce di questo piano di sezione + + + + The computed floor area of this space + La superficie del pavimento calcolata per questo spazio + + + + The finishing of the floor of this space + La finitura per il pavimento di questo spazio + + + + The finishing of the walls of this space + La finitura per le pareti di questo spazio + + + + The finishing of the ceiling of this space + La finitura per il soffitto di questo spazio + + + + Objects that are included inside this space, such as furniture + Oggetti che sono inclusi come arredo all'interno di questo spazio + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + Testo da mostrare. Per inserire i rispettivi dati utilizzare $area, $label, $tag, $floor, $walls, $ceiling + + + + The name of the font + Il nome del font + + + + The color of the area text + Il colore dell'area del testo + + + + The size of the text font + La dimensione del font di testo + + + + The size of the first line of text + La dimensione della prima riga di testo + + + + The space between the lines of text + Lo spazio tra le righe di testo + + + + The position of the text. Leave (0,0,0) for automatic position + La posizione del testo. Lasciare (0, 0,0) per posizionarlo automaticamente + + + + The justification of the text + La giustificazione del testo + + + + The number of decimals to use for calculated texts + Il numero di decimali da utilizzare per i testi calcolati + + + + Show the unit suffix + Visualizza il suffisso dell'unità + + + + A description of the standard profile this element is based upon + Una descrizione del profilo standard su cui è basato questo elemento + + + + Sill height + Altezza del davanzale + + + + CutVolume + Volume di taglio + + + + CutPlane + Piano di taglio + + + + PreviewCutVolume + Anteprima del volume di taglio + + + + Cut Plane + Piano di taglio + + + + Cut Plane options + Opzioni taglio di piano + + + + Wich side to cut + Quale lato tagliare + + + + Behind + Dietro + + + + Front + Di fronte + + + + Crossing point not found in profile. + + Punto di incrocio non trovato nel profilo. + + + + + A list of angles for each roof pane + Una lista di angoli per ogni falda del tetto + + + + A list of horizontal length projections for each roof pane + Una lista della lunghezza orizzontale delle proiezioni di ogni falda del tetto + + + + A list of IDs of relative profiles for each roof pane + Una lista di ID dei relativi profili per ogni falda del tetto + + + + A list of thicknesses for each roof pane + Una lista dello spessore di ogni falda del tetto + + + + A list of overhangs for each roof pane + Una lista della sporgenza di ogni falda del tetto + + + + A list of calculated heights for each roof pane + Una lista delle altezze calcolate per ogni falda del tetto + + + + Angle (deg) + Angolo (gradi) + + + + Run (mm) + Corsa (mm) + + + + Thickness (mm) + Spessore (mm) + + + + Overhang (mm) + Sbalzo (mm) + + + + Height (mm) + Altezza (mm) + + + + Arch_3Views + + + 3 views from mesh + 3 viste da mesh + + + + Creates 3 views (top, front, side) from a mesh-based object + Crea 3 viste (superiore, anteriore, laterale) di un oggetto mesh + Arch_Add - + Add component Aggiungi componente - + Adds the selected components to the active object Aggiunge i componenti selezionati all'oggetto attivo @@ -882,12 +1221,12 @@ Arch_Axis - + Axis Asse - + Creates an axis system. Crea un sistema di assi. @@ -895,12 +1234,12 @@ Arch_Building - + Building Edificio - + Creates a building object including selected objects. Crea un oggetto Edificio che contiene gli oggetti selezionati. @@ -908,17 +1247,17 @@ Arch_Check - + Check Controlla - + Checks the selected objects for problems - Controlla gli oggetti selezionati per problemi + Controlla se gli oggetti selezionati hanno dei problemi - + Explore the contents of an Ifc file Esplora il contenuto di un file Ifc @@ -926,18 +1265,41 @@ Arch_CloseHoles - + Close holes Chiudi fori - + Closes holes in open shapes, turning them solids Chiude i fori nelle forme aperte, trasformandole in solidi - Arch_Fixture + Arch_CutPlane + + + Cut with plane + Taglio con piano + + + + Cut an object with a plane + Tagliare un oggetto con un piano + + + + Arch_Equipment + + + Equipment + Arredo + + + + Creates an equipment object from a selected object (Part or Mesh) + Crea un oggetto di arredo da un oggetto selezionato (Parte o Mesh) + Arch_Floor @@ -955,20 +1317,20 @@ Arch_Frame - + Frame Telaio - + Creates a frame object from a planar 2D object and a profile - Creates a frame object from a planar 2D object and a profile + Crea un oggetto frame da un oggetto 2D planare e un profilo Arch_IfcExplorer - + Ifc Explorer Explorer ifc @@ -976,12 +1338,12 @@ Arch_MergeWalls - + Merge Walls Unisci pareti - + Merges the selected walls, if possible Unisce le pareti selezionate, se possibile @@ -989,25 +1351,38 @@ Arch_MeshToShape - + Mesh to Shape Da Mesh a Forma - + Turns selected meshes into Part Shape objects Trasforma le mesh selezionate in oggetti Part Shape + + Arch_Panel + + + Panel + Pannello + + + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Crea un oggetto Panello da zero o da un oggetto selezionato (schizzo, contorno, faccia o solido) + + Arch_Rebar - + Rebar Armatura - + Creates a Reinforcement bar from the selected face of a structural object Crea una barra di rinforzo dalla faccia selezionata di un oggetto strutturale @@ -1015,25 +1390,25 @@ Arch_Remove - + Remove component Rimuovi componente - + Remove the selected components from their parents, or create a hole in a component - Rimuove i componenti selezionati dai loro padri, o crea un buco in un componente + Rimuove i componenti selezionati dai loro genitori, o crea un buco in un componente Arch_RemoveShape - + Remove Shape from Arch Rimuovi Forma da Arch - + Removes cubic shapes from Arch components Rimuove le forme cubiche dai componenti Arch @@ -1041,25 +1416,25 @@ Arch_Roof - + Roof Tetto - - Creates a roof object from the selected face of an object - Crea un oggetto tetto dalla faccia selezionata di un oggetto + + Creates a roof object from the selected wire. + Crea un oggetto tetto dal contorno selezionato. Arch_SectionPlane - + Section Plane Piano di sezione - + Creates a section plane object, including the selected objects Crea un oggetto piano di sezione che comprende gli oggetti selezionati @@ -1067,12 +1442,12 @@ Arch_SelectNonSolidMeshes - + Select non-manifold meshes Seleziona le mesh non-manifold - + Selects all non-manifold meshes from the document or from the selected groups Seleziona tutte le mesh non-manifold nel documento o nei gruppi selezionati @@ -1080,12 +1455,12 @@ Arch_Site - + Site Sito - + Creates a site object including selected objects. Crea un oggetto sito che contiene gli oggetti selezionati. @@ -1093,17 +1468,17 @@ Arch_Space - + Space Spazio - + Creates a space object from selected boundary objects - Creates a space object from selected boundary objects + Crea un oggetto spaziale dagli oggetti del contorno selezionato - + Creates a stairs object Crea un oggetto scale @@ -1111,20 +1486,20 @@ Arch_SplitMesh - + Split Mesh Dividi Mesh - + Splits selected meshes into independent components - Divide le Meshes selezionate in componenti indipendenti + Divide le Mesh selezionate in componenti indipendenti Arch_Stairs - + Stairs Scale @@ -1132,12 +1507,12 @@ Arch_Structure - + Structure Struttura - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Crea un oggetto struttura da zero o da un oggetto selezionato (schizzo, wire, faccia o solido) @@ -1145,25 +1520,38 @@ Arch_Survey - + Survey - Survey + Ispeziona - + Starts survey - Starts survey + Avvia ispezione + + + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Attiva/Disattiva IFC Brep + + + + Force an object to be exported as Brep or not + Forza, o non, l'esportazione di un oggetto come Brep Arch_Wall - + Wall Parete - + Creates a wall object from scratch or from a selected object (wire, face or solid) Crea un oggetto Parete da zero o da un oggetto selezionato (wire, faccia o solido) @@ -1171,12 +1559,12 @@ Arch_Window - + Window Finestra - + Creates a window object from a selected object (wire, rectangle or sketch) Crea un oggetto finestra da un oggetto selezionato (wire, rettangolo o sketch) @@ -1203,16 +1591,6 @@ IFC import Importa IFC - - - Creates groups for each Arch object type - Crea gruppi per ogni tipo di oggetto Arch - - - - Group components by types - Raggruppa componenti per tipo - 2D rendering @@ -1226,7 +1604,7 @@ Show renderer debug messages - Visualizza i messaggi di debug di render + Visualizza i messaggi di debug del render @@ -1236,25 +1614,25 @@ Specifies how many times the viewed line thickness must be applied to cut lines - Specifica quante volte lo spessore di linea visualizzato deve essere applicato per tagliare le linee + Specifica quante volte lo spessore di linea visualizzato deve essere applicato alle linee di taglio - + Width: Larghezza: - + Height: Altezza: - + Color: Colore: - + Length: Lunghezza: @@ -1291,7 +1669,7 @@ Frame color: - Frame color: + Colore cornice: @@ -1301,7 +1679,7 @@ Snapping - Snapping + Aggancio @@ -1316,7 +1694,7 @@ If this is checked, when 2 similar walls are being connected, their underlying sketches will be joined into one, and the two walls will become one - Se selezionato, quando 2 pareti simili vengono connesse, i loro skecth saranno uniti in uno, e le due pareti diventeranno una + Se selezionato, quando 2 pareti simili vengono connesse, i loro skecth sono uniti in uno, e le due pareti diventano una @@ -1361,18 +1739,13 @@ If this is checked, holes in faces will be performed by subtraction rather than using wires orientation - Se selezionato, i fori nelle facce saranno creati mediante sottrazione piuttosto che utilizzando l'orientamento degli wire + Se selezionato, i fori nelle facce sono creati mediante sottrazione piuttosto che utilizzando l'orientamento dei wire Cut method Metodo di taglio - - - Import / export - Importa / Esporta - Check this to display debug messages while importing IFC files @@ -1385,78 +1758,48 @@ - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - Se selezionaato, i file IFC saranno sempre importati con il parser python interno, anche se IfcOpenShell è installato + If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted + Se selezionato, le aperture sono importate come sottrazioni, altrimenti le forme muro avranno già le loro aperture sottratte - Force python parser - Forza parser python - - - - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - Se selezionato, le aperture saranno importate come sottrazioni, altrimenti le forme muro avranno già le loro aperture sottratte - - - Separate openings Separare aperture - + If this is checked, object names will be prefixed with the IFC ID number Se selezionato, i nomi degli oggetti saranno preceduti dal numero ID IFC - + Prefix names with ID number Prefisso nomi con numero ID - + Exclude list: Lista esclusioni: - + A comma-separated list of Ifc entities to exclude from import Un elenco separato da virgole delle entità Ifc da escludere dall'importazione - - Custom IFC schema (internal parser only) - Schema personalizzato IFC (solo parser interno) - - - + IFC export Esporta IFC - + Scaling factor Fattore di scala - - - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - I file IFC sono in genere scritti in millimetri. Se si lavora con un'unità diversa, questo permetterà di scalare tutte le vostre unità per essere espresse in millimetri. - - - - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - Se selezionato, un file di testo sarà esportato insieme al file ifc, contenente l'elenco degli oggetti esportati, per scopi di verifica. - - - - Save a list of exported objects - Salva un elenco di oggetti esportati - Snap to baselines of Arch objects (override with CTRL) - Snap to baselines of Arch objects (override with CTRL) + Vincola a linee di base degli oggetti Arch (ignora con CTRL) @@ -1469,7 +1812,7 @@ Pareti - + mm mm @@ -1494,97 +1837,105 @@ Trasparenza: - - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - - - - Separate placements - Separate placements - - - - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - - - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Ad alcuni visualizzatori IFC non piacciono gli oggetti esportati come estrusioni. Usatelo per forzare tutti gli oggetti da esportare come geometria BREP. - - Force export as Breps - Forza esportazione come Breps - - - - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - <html><head/><body><p>Oggetti contenenti solidi multipli normalmente sono esportati come rappresentazioni multiple. Ad alcune applicazioni questo non piace. È possibile utilizzare questa opzione per unire questi solidi in uno.</p></body></html> - - - - Join multi-solid objects - Join multi-solid objects - - - + Collada export Esportazione Collada - - WebGL export - Esportazione WebGL + + Hidden geomety pattern + Nascondi la geometria del modello - - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + Questa è la proprietà stroke-dasharray SVG che si applica alle proiezioni degli oggetti nascosti. - - Discretize wires - Discretize wires + + 30, 10 + 30, 10 + + + + Stairs + Scale + + + + Number of steps: + Numero di gradini: + + + + Panels + Pannelli + + + + mm + mm + + + + Thickness + Spessore + + + + IFC / DAE / WebGL + IFC / DAE / WebGL + + + + Force export as Brep + Forza l'esportazione come Brep + + + + Workbench + + + Arch tools + Strumenti di Arch + + + + Draft tools + Strumenti di Draft + + + + Draft mod tools + Strumenti di modifica di Draft arch - - Arch tools - Strumenti Arch - - - - Draft tools - Strumenti Draft - - - - Draft mod tools - Strumenti di modifica Draft - - - + &Architecture &Architettura - + &Draft &Draft - + Utilities Utilità - + Snapping - Snapping + Aggancio diff --git a/src/Mod/Arch/Resources/translations/Arch_ja.qm b/src/Mod/Arch/Resources/translations/Arch_ja.qm index a1e319d99a..d3a06a9d0a 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ja.qm and b/src/Mod/Arch/Resources/translations/Arch_ja.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ja.ts b/src/Mod/Arch/Resources/translations/Arch_ja.ts index aa0e182e42..a2daba7bb0 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ja.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ja.ts @@ -4,407 +4,362 @@ Arch - + Components コンポーネント - + Components of this object このオブジェクトのコンポーネント - + Axes 軸 - + Create Axis 軸を作成 - + The intervals between axes 軸間隔 - + The angles of each axis 各軸の角度 - + The length of the axes 軸の長さ - + The size of the axis bubbles 軸バブルのサイズ - + Remove 削除 - + Add 追加 - + Axis 軸 - + Distance 距離 - + Angle 角度 - - Building - ビルディング - - - + Type conversion 型変換 - + Create Building 建物を作成 - + Floor 床 - + removing sketch support to avoid cross-referencing 相互参照を避けるためスケッチサポートを削除 - - No objects are cut by the plane - 平面によって切断されるオブジェクトがありません - - - + is not closed が閉じていません - + is not valid は無効です - + doesn't contain any solid ソリッドが含まれていません - + contains a non-closed solid 閉じていないソリッドが含まれています - + contains faces that are not part of any solid どのソリッドにも属していない面が含まれています - + Grouping グループ化 - + Ungrouping グループ化の解除 - + Split Mesh メッシュを分割 - + Mesh to Shape メッシュからシェイプへ - + All good! no problems found すべて良好！問題は見つかりませんでした - + Base component 基本コンポーネント - + Additions 加算 - + Subtractions 減算 - + Objects オブジェクト - + closing Sketch edit スケッチ編集を終了 - + The height of this floor この階の高さ - + Roof 屋根 - + Create Roof 屋根を作成 - + Unable to create a roof 屋根を作成できません - - The angle of this roof - この屋根の角度 - - - + The face number of the base object used to build this roof この屋根の作成に使用されているベースオブジェクトの面の数 - + Page ページ - + View of 表示 - + Create Section Plane 断面平面を作成 - + The objects that must be considered by this section plane. Empty means all document この断面の対象となるオブジェクト。空の場合、全てのドキュメントが対象となります。 - - The display size of this section plane - この断面の表示サイズ - - - - No shape has been computed yet, select wireframe rendering and render again - 計算済みのシェイプがまだありません。ワイヤーフレームレンダリングを選択して再レンダリングしてください - - - + Skipping invalid object: 無効なオブジェクトはスキップ: - - Site - サイト - - - + Create Site サイトを作成 - - Structure - 構造体 - - - + Create Structure 構造体を作成 - + The length of this element, if not based on a profile プロファイルに基づいていない場合、この要素の長さ - + The width of this element, if not based on a profile プロファイルに基づいていない場合、この要素の幅 - + The height or extrusion depth of this element. Keep 0 for automatic この要素の高さまたは押し出し深さ。自動設定する場合は0のままにしてください。 - + Axes systems this structure is built on この構造体の座標系 - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) このオブジェクトの法線押し出し方向（法線自動設定を行う場合は（0,0,0）のままにしてください） - + The element numbers to exclude when this structure is based on axes 軸に基づいてこの構造体を押し出す場合に押し出す要素の数 - - Wall - 壁 - - - + Create Wall 壁を作成 - + WallTrace 壁トレース - + Wall options 壁のオプション - + Width 幅 - + Height 高さ - + Alignment 配置 - + The width of this wall. Not used if this wall is based on a face この壁の幅。この壁が面に基づく場合は使用されません。 - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid この壁の高さ。自動設定する場合は0のままにしてください。この壁がソリッドに基づく場合は使用されません - + The alignment of this wall on its base object, if applicable 適用可能な場合、この壁のベースオブジェクトに対する位置 - + Error: Invalid base object エラー： 無効なベースオブジェクト - + This mesh is an invalid solid このメッシュは無効なソリッドです - - Window - ウィンドウ - - - + Create Window 窓を作成 - + the components of this window この窓のコンポーネント - + Edit 編集 - + Create/update component コンポーネントを作成/更新する - + Base 2D object ベース2Dオブジェクト - + Wires ワイヤー - + Create new component 新しいコンポーネントを作成 - + Name 名前 - + Type タイプ - + Thickness 厚み - + Z offset Z オフセット @@ -419,466 +374,844 @@ ファイル %s が正常に作成されました。 - + Error: Couldn't determine character encoding エラー: 文字エンコーディングが判別できませんでした - + Couldn't locate IfcOpenShell IfcOpenShell が見つかりません - + IFC Schema not found, IFC import disabled. IFCデータ構造が見つかりません。IFCのインポートは無効です。 - + successfully written 書き込みに成功しました - + The numbering style - The numbering style + 番号付けのスタイル - + removing sketch external references to avoid cross-referencing - removing sketch external references to avoid cross-referencing + 相互参照を避けるためにスケッチの外部参照を削除 - - Invalid cutplane - Invalid cutplane - - - + Add space boundary - Add space boundary + スペース境界を追加 - + Remove space boundary - Remove space boundary + スペース境界を削除 - + Please select a base object - Please select a base object + ベース オブジェクトを選択してください。 - + Fixtures - Fixtures + 取り付け具 - + Armatures - Armatures + 骨組み - + The placement of this group - The placement of this group + このグループの配置 Frame - Frame + 軸組 - + Create Frame - Create Frame + 軸組の作成 - - Rebar - Rebar - - - + Create Rebar - Create Rebar + 異形鉄筋を作成 - + Please select a base face on a structural object - Please select a base face on a structural object + 構造オブジェクト上から基準面を選択してください。 - - - Please select a base object - - Please select a base object - - - - - Section - セクション - - - - The placement of this object - The placement of this object - - - - The terrain of this site - The terrain of this site - - - - The address of this site - The address of this site - - - - The geographic coordinates of this site - The geographic coordinates of this site - - - - An url that shows this site in a mapping website - An url that shows this site in a mapping website - - - - Space - Space - - - - Create Space - Create Space - - - - A base shape defining this space - A base shape defining this space - + Please select a base object + + ベース オブジェクトを選択してください。 + + + + + The placement of this object + このオブジェクトの配置 + + + + The terrain of this site + 現場の地形 + + + + The address of this site + 現場の所在地 + + + + The geographic coordinates of this site + 現場の地理座標 + + + + An url that shows this site in a mapping website + 現場を示す地図サイトのURL + + + + Create Space + スペースを作成 + + + The objects that make the boundaries of this space object - The objects that make the boundaries of this space object + このスペースオブジェクトの境界を定義するオブジェクト - - Stairs - Stairs - - - + Create Stairs - Create Stairs - - - - The length of these stairs, if no baseline is defined - The length of these stairs, if no baseline is defined - - - - The width of these stairs - The width of these stairs - - - - The total height of these stairs - The total height of these stairs - - - - The alignment of these stairs on their baseline, if applicable - The alignment of these stairs on their baseline, if applicable - - - - The number of risers in these stairs - The number of risers in these stairs - - - - The depth of the treads of these stairs - The depth of the treads of these stairs - - - - The height of the risers of these stairs - The height of the risers of these stairs - - - - The size of the nosing - The size of the nosing - - - - The thickness of the treads - The thickness of the treads - - - - The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in - The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in - - - - The type of landings of these stairs - The type of landings of these stairs - - - - The type of winders in these stairs - The type of winders in these stairs - - - - The type of structure of these stairs - The type of structure of these stairs + 階段を作成 - The thickness of the massive structure or of the stringers - The thickness of the massive structure or of the stringers + The length of these stairs, if no baseline is defined + 基準線が定義されていない場合、これらの階段の長さ - The width of the stringers - The width of the stringers + The width of these stairs + 階段の幅 + The total height of these stairs + 階段の全高 + + + + The alignment of these stairs on their baseline, if applicable + これらの階段に摘要可能な場合は、ベースラインで位置合わせする + + + + The number of risers in these stairs + 階段の段数 + + + + The depth of the treads of these stairs + 階段における踏み板の奥行き + + + + The height of the risers of these stairs + 階段の蹴上げ高さ + + + + The size of the nosing + 段鼻のサイズ + + + + The thickness of the treads + 踏み板の厚み + + + + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in + ブロンデル比は、62から64cmあるいは24.5から25.5インチの間である必要があります + + + + The type of landings of these stairs + これらの階段の踊り場のタイプ + + + + The type of winders in these stairs + これらの階段の段のタイプ + + + + The type of structure of these stairs + これらの階段の構造のタイプ + + + + The thickness of the massive structure or of the stringers + 大規模な構造または横梁の厚み + + + + The width of the stringers + 横梁の幅 + + + The offset between the border of the stairs and the structure - The offset between the border of the stairs and the structure + 階段境界線と構造の間のオフセット Wood - Wood + 木材 Steel - Steel + 鋼材 - + Structure options - Structure options + 構造オプション - + Preset - Preset + プリセット - + Length 長さ - + Rotate 回転 - + Con&tinue - Con&tinue + 続行 (&T) - + An optional extrusion path for this element - An optional extrusion path for this element + この要素のオプション押し出し経路 - + Armatures contained in this element - Armatures contained in this element + この要素に含まれている骨組み - - The role of this structural element - The role of this structural element - - - + The structural nodes of this element - The structural nodes of this element + この要素の構造ノード - + Error: The base shape couldn't be extruded along this tool object - Error: The base shape couldn't be extruded along this tool object + エラー: ベースシェイプをこのツールオブジェクトに沿って押し出すことはできません - + Couldn't compute a shape - Couldn't compute a shape + シェイプを計算できません - + Merge Wall - Merge Wall + 壁を統合 - + The selected wall contain no subwall to merge - The selected wall contain no subwall to merge + 選択した壁は統合できる下位の壁を含んでいません - + Please select only wall objects - Please select only wall objects + 壁オブジェクトのみを選択してください - + Merge Walls - Merge Walls + 壁を統合 - + The length of this wall. Not used if this wall is based on an underlying object - The length of this wall. Not used if this wall is based on an underlying object + 壁の長さ。壁が基礎となるオブジェクトに基づいている場合には使用されません。 - + The face number of the base object used to build this wall - The face number of the base object used to build this wall + この壁の作成に使用されているベースオブジェクトの面の数 - + The offset between this wall and its baseline (only for left and right alignments) - The offset between this wall and its baseline (only for left and right alignments) + この壁とそのベースラインとの間のオフセット距離(左揃え、右揃えの時のみ) - + Pick a face on an existing object or select a preset - Pick a face on an existing object or select a preset - + 既存オブジェクトにある面を選択するか、プリセットを選択 - + Window options - Window options + 窓のオプション - + The depth of the hole that this window makes in its host object. Keep 0 for automatic. - The depth of the hole that this window makes in its host object. Keep 0 for automatic. + 穴の深さは、そのホスト・オブジェクトに作る窓の開口にある。 0であれば自動。 - - an optional volume to be subtracted from hosts of this window - an optional volume to be subtracted from hosts of this window - - - + The width of this window (for preset windows only) - The width of this window (for preset windows only) + この窓の幅（プリセットに用いる幅） - + The height of this window (for preset windows only) - The height of this window (for preset windows only) + この窓の高さ（プリセットに用いる幅） - + The normal direction of this window - The normal direction of this window + このウィンドウの法線方向 - - The role of this window - The role of this window - - - + Unable to create component - Unable to create component - + コンポーネントを作成できません pycollada not found, collada support is disabled. - pycollada not found, collada support is disabled. - + pycollada が見つかりません。collada のサポートは無効です。 - + IfcOpenShell not found or disabled, falling back on internal parser. - IfcOpenShell not found or disabled, falling back on internal parser. - + IfcOpenShellが見つからないか、もしくは無効です。内部パーサーに処理を戻します。 - + Distances (mm) and angles (deg) between axes - Distances (mm) and angles (deg) between axes + 軸の間の距離 (mm) と角度 (度) - + Error computing the shape of this object - Error computing the shape of this object + このオブジェクトのシェイプ計算でエラーが発生しました。 - - StructuralSystem - StructuralSystem - - - + Create Structural System - Create Structural System + 構造システムを作成 - - The role of this wall - The role of this wall - - - + Error: IfcOpenShell is not installed - Error: IfcOpenShell is not installed - + エラー: IfcOpenShellがインストールされていません。 - + Error: your IfcOpenShell version is too old - Error: your IfcOpenShell version is too old - + エラー: IfcOpenShellバージョンが古すぎます。 Found a shape containing curves, triangulating - Found a shape containing curves, triangulating + 三角分割および曲線を含む図形が見つかりました + + + Invalid cutplane + + Invalid cutplane + + + + + No objects are cut by the plane + + No objects are cut by the plane + + + + + Object doesn't have settable IFC Attributes + Object doesn't have settable IFC Attributes + + + + Disabling Brep force flag of object + Disabling Brep force flag of object + + + + Enabling Brep force flag of object + Enabling Brep force flag of object + + + + The base object this component is built upon + The base object this component is built upon + + + + Other shapes that are appended to this object + Other shapes that are appended to this object + + + + Other shapes that are subtracted from this object + Other shapes that are subtracted from this object + + + + An optional description for this component + An optional description for this component + + + + An optional tag for this component + An optional tag for this component + + + + Custom IFC properties and attributes + Custom IFC properties and attributes + + + + A material for this object + A material for this object + + + + The role of this object + The role of this object + + + + Specifies if this object must move together when its host is moved + Specifies if this object must move together when its host is moved + + + + has no solid + ソリッドではありません + + + + has an invalid shape + 無効な形状があります + + + + has a null shape + 形状がありません + + + + Cutting + 切断 + + + + You must select a base object first! + You must select a base object first! + + + + Create Equipment + 調度品を作成 + + + + You must select exactly one base object + You must select exactly one base object + + + + The selected object must be a mesh + The selected object must be a mesh + + + + This mesh has more than 1000 facets. + This mesh has more than 1000 facets. + + + + This operation can take a long time. Proceed? + This operation can take a long time. Proceed? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + The mesh has more than 500 facets. This will take a couple of minutes... + + + + Create 3 views + Create 3 views + + + + an optional 2D shape representing a top view of this equipment + an optional 2D shape representing a top view of this equipment + + + + an optional 2D shape representing a front view of this equipment + an optional 2D shape representing a front view of this equipment + + + + an optional 2D shape representing a side view of this equipment + an optional 2D shape representing a side view of this equipment + + + + The model description of this equipment + The model description of this equipment + + + + The url of the product page of this equipment + The url of the product page of this equipment + + + + Create Panel + Create Panel + + + + Panel options + Panel options + + + + The thickness or extrusion depth of this element + The thickness or extrusion depth of this element + + + + The number of sheets to use + The number of sheets to use + + + + The offset between this panel and its baseline + The offset between this panel and its baseline + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + + + + Id + Id + + + + IdRel + IdRel + + + + If false, non-solids will be cut too, with possible wrong results. + If false, non-solids will be cut too, with possible wrong results. + + + + The display length of this section plane + The display length of this section plane + + + + The display height of this section plane + The display height of this section plane + + + + The size of the arrows of this section plane + The size of the arrows of this section plane + + + + The computed floor area of this space + The computed floor area of this space + + + + The finishing of the floor of this space + The finishing of the floor of this space + + + + The finishing of the walls of this space + The finishing of the walls of this space + + + + The finishing of the ceiling of this space + The finishing of the ceiling of this space + + + + Objects that are included inside this space, such as furniture + Objects that are included inside this space, such as furniture + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + + + + The name of the font + The name of the font + + + + The color of the area text + The color of the area text + + + + The size of the text font + The size of the text font + + + + The size of the first line of text + The size of the first line of text + + + + The space between the lines of text + The space between the lines of text + + + + The position of the text. Leave (0,0,0) for automatic position + The position of the text. Leave (0,0,0) for automatic position + + + + The justification of the text + The justification of the text + + + + The number of decimals to use for calculated texts + The number of decimals to use for calculated texts + + + + Show the unit suffix + Show the unit suffix + + + + A description of the standard profile this element is based upon + A description of the standard profile this element is based upon + + + + Sill height + Sill height + + + + CutVolume + CutVolume + + + + CutPlane + CutPlane + + + + PreviewCutVolume + PreviewCutVolume + + + + Cut Plane + Cut Plane + + + + Cut Plane options + Cut Plane options + + + + Wich side to cut + Wich side to cut + + + + Behind + Behind + + + + Front + 正面図 + + + + Crossing point not found in profile. + + Crossing point not found in profile. + + + + + A list of angles for each roof pane + A list of angles for each roof pane + + + + A list of horizontal length projections for each roof pane + A list of horizontal length projections for each roof pane + + + + A list of IDs of relative profiles for each roof pane + A list of IDs of relative profiles for each roof pane + + + + A list of thicknesses for each roof pane + A list of thicknesses for each roof pane + + + + A list of overhangs for each roof pane + A list of overhangs for each roof pane + + + + A list of calculated heights for each roof pane + A list of calculated heights for each roof pane + + + + Angle (deg) + Angle (deg) + + + + Run (mm) + Run (mm) + + + + Thickness (mm) + Thickness (mm) + + + + Overhang (mm) + Overhang (mm) + + + + Height (mm) + Height (mm) + + + + Arch_3Views + + + 3 views from mesh + 3 views from mesh + + + + Creates 3 views (top, front, side) from a mesh-based object + Creates 3 views (top, front, side) from a mesh-based object + Arch_Add - + Add component コンポーネントを追加 - + Adds the selected components to the active object 選択したコンポーネントをアクティブなオブジェクトに追加します @@ -886,12 +1219,12 @@ Arch_Axis - + Axis 軸 - + Creates an axis system. 座標系を作成します。 @@ -899,12 +1232,12 @@ Arch_Building - + Building ビルディング - + Creates a building object including selected objects. 選択されているオブジェクトを含むビルディングオブジェクトを作成します @@ -912,36 +1245,59 @@ Arch_Check - + Check チェック - + Checks the selected objects for problems 選択されているオブジェクトの問題を確認します - + Explore the contents of an Ifc file - Explore the contents of an Ifc file + Ifcファイルの内容を閲覧 Arch_CloseHoles - + Close holes 穴をふさぐ - + Closes holes in open shapes, turning them solids 開いたシェイプの穴をふさいでソリッドにします - Arch_Fixture + Arch_CutPlane + + + Cut with plane + Cut with plane + + + + Cut an object with a plane + Cut an object with a plane + + + + Arch_Equipment + + + Equipment + Equipment + + + + Creates an equipment object from a selected object (Part or Mesh) + Creates an equipment object from a selected object (Part or Mesh) + Arch_Floor @@ -959,72 +1315,85 @@ Arch_Frame - + Frame - Frame + 軸組 - + Creates a frame object from a planar 2D object and a profile - Creates a frame object from a planar 2D object and a profile + 二次元平面オブジェクトおよびプロファイルから軸組オブジェクトを作成する Arch_IfcExplorer - + Ifc Explorer - Ifc Explorer + IFCエクスプ ローラー Arch_MergeWalls - + Merge Walls - Merge Walls + 壁を統合 - + Merges the selected walls, if possible - Merges the selected walls, if possible + 可能な場合、選択した壁を結合 Arch_MeshToShape - + Mesh to Shape メッシュからシェイプへ - + Turns selected meshes into Part Shape objects 選択されているメッシュをパートシェイプオブジェクトへ変換します - Arch_Rebar + Arch_Panel - - Rebar - Rebar + + Panel + Panel - + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + + + + Arch_Rebar + + + Rebar + 異形鉄筋 + + + Creates a Reinforcement bar from the selected face of a structural object - Creates a Reinforcement bar from the selected face of a structural object + 構造オブジェクトの選択した面から異形鉄筋を作成します Arch_Remove - + Remove component コンポーネントの削除 - + Remove the selected components from their parents, or create a hole in a component 選択されているオブジェクトを親オブジェクトから取り除くか、またはコンポーネントに穴を作成します @@ -1032,12 +1401,12 @@ Arch_RemoveShape - + Remove Shape from Arch Archからシェイプを削除します。 - + Removes cubic shapes from Arch components Archコンポーネントから立方体シェイプを取り除きます @@ -1045,25 +1414,25 @@ Arch_Roof - + Roof 屋根 - - Creates a roof object from the selected face of an object - オブジェクトの選択された面から屋根オブジェクトを作成します + + Creates a roof object from the selected wire. + Creates a roof object from the selected wire. Arch_SectionPlane - + Section Plane 断面 - + Creates a section plane object, including the selected objects 選択されたオブジェクトを含む断面オブジェクトを作成します @@ -1071,12 +1440,12 @@ Arch_SelectNonSolidMeshes - + Select non-manifold meshes ノンマニフォールドメッシュを選択 - + Selects all non-manifold meshes from the document or from the selected groups ドキュメントまたは選択されているグループから全てのノンマニフォールドメッシュを選択 @@ -1084,12 +1453,12 @@ Arch_Site - + Site サイト - + Creates a site object including selected objects. 選択されているオブジェクトを含むサイトオブジェクトを作成します @@ -1097,30 +1466,30 @@ Arch_Space - + Space - Space + スペース - + Creates a space object from selected boundary objects - Creates a space object from selected boundary objects + 選択した境界オブジェクトから空間オブジェクトを作成します - + Creates a stairs object - Creates a stairs object + 階段オブジェクトを作成 Arch_SplitMesh - + Split Mesh メッシュを分割 - + Splits selected meshes into independent components 選択されたメッシュを分割して独立したコンポーネントにします @@ -1128,20 +1497,20 @@ Arch_Stairs - + Stairs - Stairs + 階段 Arch_Structure - + Structure 構造体 - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) スクラッチまたは選択されているオブジェクト（スケッチ、ワイヤー、面、ソリッド）から構造体オブジェクトを作成します @@ -1149,25 +1518,38 @@ Arch_Survey - + Survey - Survey + 調査 - + Starts survey - Starts survey + 調査開始 + + + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Toggle IFC Brep flag + + + + Force an object to be exported as Brep or not + Force an object to be exported as Brep or not Arch_Wall - + Wall 壁 - + Creates a wall object from scratch or from a selected object (wire, face or solid) スクラッチまたは選択されているオブジェクト（ワイヤー、面、ソリッド）から壁オブジェクトを作成します @@ -1175,12 +1557,12 @@ Arch_Window - + Window ウィンドウ - + Creates a window object from a selected object (wire, rectangle or sketch) 選択されているオブジェクト（ワイヤー、長方形、スケッチ）から窓オブジェクトを作成します @@ -1207,16 +1589,6 @@ IFC import IFCをインポート - - - Creates groups for each Arch object type - 各Archオブジェクト型のグループを作成 - - - - Group components by types - 型によるグループコンポーネント - 2D rendering @@ -1243,29 +1615,29 @@ 表示ライン太さの何倍をカットラインに適用するかを指定 - + Width: 幅： - + Height: 高さ: - + Color: - Color: + 色： - + Length: 長さ: Diameter - Diameter + 直径 @@ -1275,217 +1647,183 @@ The default width for new windows - The default width for new windows + 新規窓の既定幅 The default height for new windows - The default height for new windows + 新規窓の既定高 Thickness: - Thickness: + 厚さ: The default thickness for new windows - The default thickness for new windows + 新規窓の既定の厚み Frame color: - Frame color: + 軸組の色: Glass color: - Glass color: + ガラスの色: Snapping - Snapping + スナップ Walls drawing - Walls drawing + 壁図面 Auto-join walls - Auto-join walls + 壁の自動結合 If this is checked, when 2 similar walls are being connected, their underlying sketches will be joined into one, and the two walls will become one - If this is checked, when 2 similar walls are being connected, their underlying sketches will be joined into one, and the two walls will become one + チェックされている場合、2つの同じような壁がつながっている時にはその元となるスケッチを1つに結合し、2つの壁を1つにします。 Join walls base sketches when possible - Join walls base sketches when possible + 可能な場合には壁のベーススケッチを結合 Mesh to Shape Conversion - Mesh to Shape Conversion + メッシュをシェイプに変換します If this is checked, conversion is faster but the result might still contain triangulated faces - If this is checked, conversion is faster but the result might still contain triangulated faces + チェックされている場合、変換が高速になりますが結果に3角形面が残る可能性があります。 Fast conversion - Fast conversion + 高速変換 Tolerance: - Tolerance: + 許容範囲: Tolerance value to use when checking if 2 adjacent faces as planar - Tolerance value to use when checking if 2 adjacent faces as planar + 隣り合う2面が同一平面上にあるかどうか調べる際に使用する許容値 If this is checked, flat groups of faces will be force-flattened, resulting in possible gaps and non-solid results - If this is checked, flat groups of faces will be force-flattened, resulting in possible gaps and non-solid results + チェックされている場合、面のフラット・グループが強制的に平滑化されます。処理の結果に段差が含まれたり、非ソリッドな結果となる場合があります。 Force flat faces - Force flat faces + 強制的に平滑化 If this is checked, holes in faces will be performed by subtraction rather than using wires orientation - If this is checked, holes in faces will be performed by subtraction rather than using wires orientation + チェックされている場合、面に開いた穴はワイヤー方向を使わずに減算によって処理されます。 Cut method - Cut method - - - - Import / export - Import / export + 切断方法 Check this to display debug messages while importing IFC files - Check this to display debug messages while importing IFC files + チェックした場合、IFCファイルをインポートしている時にデバッグ情報を表示します Show debug messages - Show debug messages + デバッグ情報を表示 - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed + If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted + チェックされている場合、開口部は減算結果としてインポートされます。それ以外の場合、壁形状はすでに開口部を減算したものになります。 + - Force python parser - Force python parser + Separate openings + 開口部を識別 + + + + If this is checked, object names will be prefixed with the IFC ID number + チェックされている場合、オブジェクト名の接頭辞にIFC ID番号が使用されます。 + + + + Prefix names with ID number + ID番号の接頭辞 - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - - - - Separate openings - Separate openings - - - - If this is checked, object names will be prefixed with the IFC ID number - If this is checked, object names will be prefixed with the IFC ID number - - - - Prefix names with ID number - Prefix names with ID number - - - Exclude list: - Exclude list: + 除外リスト： - + A comma-separated list of Ifc entities to exclude from import - A comma-separated list of Ifc entities to exclude from import + カンマと空白文字で区切られたIFCエンティティのリストをインポートから除外する - - Custom IFC schema (internal parser only) - Custom IFC schema (internal parser only) - - - + IFC export - IFC export + IFC エクスポート - + Scaling factor - Scaling factor - - - - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - - - - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - これがオンの場合は ifc ファイルと共に検証の目的のためのエクスポートされたオブジェクトのリストを含むテキスト ファイルがエクスポートされます。 - - - - Save a list of exported objects - エクスポートされたオブジェクトのリストを保存 + スケーリング係数 Snap to baselines of Arch objects (override with CTRL) - Snap to baselines of Arch objects (override with CTRL) + 建築オブジェクトの基準線にスナップ (ctrl を押すとオーバーライドします) 。 Defaults - Defaults + 既定の値 Walls - Walls + 壁 - + mm - mm + mm Structures - Structures + 構造体 Rebars - Rebars + 鉄筋 @@ -1498,97 +1836,105 @@ 透明度: - - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - - - - Separate placements - Separate placements - - - - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - - - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. - Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. + 一部のIFCビューワーでは押し出し部品としてエクスポートされたオブジェクトを読み取れないことがあります。これを使用するとすべてのオブジェクトを強制的にBREPジオメトリーとしてエクスポートします。 - - Force export as Breps - Force export as Breps - - - - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - - - - Join multi-solid objects - Join multi-solid objects - - - + Collada export - Collada export + Collada のエクスポート - - WebGL export - WebGL export + + Hidden geomety pattern + Hidden geomety pattern - - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + This is the SVG stroke-dasharray property to apply to projections of hidden objects. - - Discretize wires - Discretize wires + + 30, 10 + 30, 10 + + + + Stairs + 階段 + + + + Number of steps: + Number of steps: + + + + Panels + Panels + + + + mm + mm + + + + Thickness + 厚み + + + + IFC / DAE / WebGL + IFC / DAE / WebGL + + + + Force export as Brep + Force export as Brep + + + + Workbench + + + Arch tools + Arch tools + + + + Draft tools + Draft tools + + + + Draft mod tools + Draft mod tools arch - - Arch tools - Archツール - - - - Draft tools - ドラフトツール - - - - Draft mod tools - ドラフトモジュールツール - - - + &Architecture 建築(&A) - + &Draft ドラフト(&D) - + Utilities ユーティリティ - + Snapping - Snapping + スナップ diff --git a/src/Mod/Arch/Resources/translations/Arch_nl.qm b/src/Mod/Arch/Resources/translations/Arch_nl.qm index cb43e7a2d0..9a2e9341de 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_nl.qm and b/src/Mod/Arch/Resources/translations/Arch_nl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_nl.ts b/src/Mod/Arch/Resources/translations/Arch_nl.ts index bd03b2d1bd..bd93007a87 100644 --- a/src/Mod/Arch/Resources/translations/Arch_nl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_nl.ts @@ -4,407 +4,362 @@ Arch - + Components Componenten - + Components of this object Onderdelen van dit object - + Axes Assen - + Create Axis Maak as - + The intervals between axes De intervallen tussen de assen - + The angles of each axis De hoeken van elke as - + The length of the axes De lengte van de assen - + The size of the axis bubbles De grootte van de asballonnetjes - + Remove Verwijderen - + Add Toevoegen - + Axis As - + Distance Afstand - + Angle Hoek - - Building - Gebouw - - - + Type conversion Typeconversie - + Create Building Maak gebouw - + Floor Verdieping - + removing sketch support to avoid cross-referencing Schetsondersteuning verwijderen om kruisverwijzingen te vermijden - - No objects are cut by the plane - Geen objecten worden gesneden door het vlak - - - + is not closed is niet gesloten - + is not valid is niet geldig - + doesn't contain any solid bevat geen solid - + contains a non-closed solid bevat een niet-gesloten solid - + contains faces that are not part of any solid bevat faces die niet deel uitmaken van een solid - + Grouping Groeperen - + Ungrouping Opheffen van groepering - + Split Mesh Net splitten - + Mesh to Shape Net naar Vorm - + All good! no problems found Alle goed! Geen problemen gevonden - + Base component Basiscomponent - + Additions Toevoegingen - + Subtractions Aftrekken - + Objects Objecten - + closing Sketch edit Schetsbewerking sluiten - + The height of this floor De hoogte van deze verdieping - + Roof Dak - + Create Roof Maak dak - + Unable to create a roof Onmogelijk om een dak te maken - - The angle of this roof - De hoek van dit dak - - - + The face number of the base object used to build this roof Het nummer van de face van het basis object dat wordt gebruikt om dit dak te maken - + Page Pagina - + View of Weergave van - + Create Section Plane Sectievlak maken - + The objects that must be considered by this section plane. Empty means all document De objecten die door deze doorsnede moeten worden beschouwd. Lege betekent alle document - - The display size of this section plane - De weergavegrootte van dit sectievlak - - - - No shape has been computed yet, select wireframe rendering and render again - Er is nog geen vorm berekend. Selecteer draadmodel-rendering en render opnieuw - - - + Skipping invalid object: Ongeldig object overgeslagen: - - Site - Bouwterrein - - - + Create Site Werf aanmaken - - Structure - Structuur - - - + Create Structure Structuur aanmaken - + The length of this element, if not based on a profile De breedte van dit element, indien niet gebaseerd profiel - + The width of this element, if not based on a profile De breedte van dit element, indien niet gebaseerd op een profiel - + The height or extrusion depth of this element. Keep 0 for automatic De hoogte of 3D-diepte van dit element. Houd 0 voor automatisch - + Axes systems this structure is built on Assenstelsel waarop deze structuur gebouwd is - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) De normale extrusierichting van dit opject (houd (0,0,0) voor automatische normaal) - + The element numbers to exclude when this structure is based on axes Het aantal extrusie-elementen indien deze structuur gebaseerd is op assen - - Wall - Muur - - - + Create Wall Maak muur - + WallTrace WallTrace - + Wall options Muur opties - + Width Breedte - + Height Hoogte - + Alignment Uitlijning - + The width of this wall. Not used if this wall is based on a face De breedte van deze muur. Wordt niet gebruikt als de muur is gebaseerd op een face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid De hoogte van deze wand. Houd 0 voor automatisch. Niet gebruikt als de wand gebaseerd is op een solid - + The alignment of this wall on its base object, if applicable De richting van deze muur op zijn basisobject, indien beschikbaar - + Error: Invalid base object Fout: ongeldig basisvoorwerp - + This mesh is an invalid solid - This mesh is an invalid solid + Dit net vormt een ongeldige solid - - Window - Venster - - - + Create Window Maak venster - + the components of this window de componenten van dit venster - + Edit Bewerken - + Create/update component Component maken of bijwerken - + Base 2D object Basis 2D-voorwerp - + Wires Draden - + Create new component Maak nieuw component - + Name Naam - + Type Type - + Thickness Dikte - + Z offset Z-verschuiving @@ -419,73 +374,68 @@ bestand %s met succes aangemaakt. - + Error: Couldn't determine character encoding Fout: Kan de tekencodering niet bepalen - + Couldn't locate IfcOpenShell Kon IfcOpenShell niet vinden - + IFC Schema not found, IFC import disabled. IFC schema niet gevonden, IFC import is uitgeschakeld. - + successfully written met succes geschreven  - + The numbering style De nummeringsstijl - + removing sketch external references to avoid cross-referencing Externe schetsverwijzingen verwijderen om kruisverwijzing te vermijden - - Invalid cutplane - Ongeldig snijvlak - - - + Add space boundary Ruimtegrens toevoegen - + Remove space boundary Ruimtegrens verwijderen - + Please select a base object Selecteer een basisobject - + Fixtures - Fixtures + Bevestigingen - + Armatures Ankers - + The placement of this group De plaatsing van deze groep @@ -495,321 +445,281 @@ Frame - + Create Frame Frame maken - - Rebar - Wapening - - - + Create Rebar Wapening maken - + Please select a base face on a structural object Selecteer een oppervlak op een structurele object - + Please select a base object Selecteer een basisobject - - Section - Doorsnede - - - + The placement of this object De plaatsing van dit object - + The terrain of this site De vorm van deze bouwterrein - + The address of this site Het adres van deze bouwterrein - + The geographic coordinates of this site De geografische coördinaten van deze bouwterrein - + An url that shows this site in a mapping website Een url die deze bouwterrein beschrijft in een mapping website - - Space - Ruimte - - - + Create Space Ruimte maken - - A base shape defining this space - Een basisvorm die deze ruimte gefineerd - - - + The objects that make the boundaries of this space object De objecten die de grenzen van deze ruimte maken - - Stairs - Trap - - - + Create Stairs Trap maken - + The length of these stairs, if no baseline is defined De lengte van deze trap, als er geen basislijn is - + The width of these stairs De breedte van deze trap - + The total height of these stairs De totale hoogte van deze trap - + The alignment of these stairs on their baseline, if applicable De richting van deze trap op zijn basislijn, indien beschikbaar - + The number of risers in these stairs - The number of risers in these stairs + Het aantal tegentreden van de trap - + The depth of the treads of these stairs - The depth of the treads of these stairs + Diepte van de traptreden - + The height of the risers of these stairs - The height of the risers of these stairs + Hoogte van de tegentreden van de trap - + The size of the nosing - The size of the nosing + Maat trap-neus - + The thickness of the treads - The thickness of the treads + Dikte van de treden - + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in - The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in + De Blondel verhouding moet liggen tussen 62-64cm of 24.5-25.5in - + The type of landings of these stairs The type of landings of these stairs - + The type of winders in these stairs The type of winders in these stairs - + The type of structure of these stairs The type of structure of these stairs - + The thickness of the massive structure or of the stringers The thickness of the massive structure or of the stringers - + The width of the stringers The width of the stringers - + The offset between the border of the stairs and the structure The offset between the border of the stairs and the structure Wood - Wood + Hout Steel - Steel + Staal - + Structure options Structure options - + Preset - Preset + Voorinstelling - + Length Lengte - + Rotate Draaien - + Con&tinue Con&tinue - + An optional extrusion path for this element An optional extrusion path for this element - + Armatures contained in this element Armatures contained in this element - - The role of this structural element - The role of this structural element - - - + The structural nodes of this element The structural nodes of this element - + Error: The base shape couldn't be extruded along this tool object Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape Couldn't compute a shape - + Merge Wall - Merge Wall + Muren samenvoegen - + The selected wall contain no subwall to merge - The selected wall contain no subwall to merge + De geselecteerde muur bevat geen submuur om mee samen te voegen - + Please select only wall objects - Please select only wall objects + Selecteer alleen muur objecten - + Merge Walls Muren samenvoegen - + The length of this wall. Not used if this wall is based on an underlying object De lengte van deze muur. Dit wordt niet gebruikt als deze muur is gebaseerd op een onderliggend object - + The face number of the base object used to build this wall Het vlaknummer van dit basisobject dat gebruikt wordt om deze muur te bouwen - + The offset between this wall and its baseline (only for left and right alignments) De tussenafstand tussen deze muur en zijn basislijn (alleen voor links en rechtse uitlijningen) - + Pick a face on an existing object or select a preset Pick a face on an existing object or select a preset - + Window options - Window options + Opties voor raam - + The depth of the hole that this window makes in its host object. Keep 0 for automatic. - The depth of the hole that this window makes in its host object. Keep 0 for automatic. + De diepte van het gat dat dit raam maakt in zijn host-object. Laat op 0 voor automatisch. - - an optional volume to be subtracted from hosts of this window - an optional volume to be subtracted from hosts of this window - - - + The width of this window (for preset windows only) The width of this window (for preset windows only) - + The height of this window (for preset windows only) The height of this window (for preset windows only) - + The normal direction of this window De normale richting van dit venster - - The role of this window - De rol van dit venster - - - + Unable to create component - Unable to create component + Ik kan geen component maken @@ -820,46 +730,36 @@ - + IfcOpenShell not found or disabled, falling back on internal parser. IfcOpenShell not found or disabled, falling back on internal parser. - + Distances (mm) and angles (deg) between axes - Distances (mm) and angles (deg) between axes + Afstanden (mm) en hoeken (graden) tussen assen - + Error computing the shape of this object Error computing the shape of this object - - StructuralSystem - StructuralSystem - - - + Create Structural System Create Structural System - - The role of this wall - De rol van deze muur - - - + Error: IfcOpenShell is not installed Error: IfcOpenShell is not installed - + Error: your IfcOpenShell version is too old Error: your IfcOpenShell version is too old @@ -872,16 +772,455 @@ Found a shape containing curves, triangulating + + + Invalid cutplane + + Invalid cutplane + + + + + No objects are cut by the plane + + No objects are cut by the plane + + + + + Object doesn't have settable IFC Attributes + Object doesn't have settable IFC Attributes + + + + Disabling Brep force flag of object + Disabling Brep force flag of object + + + + Enabling Brep force flag of object + Enabling Brep force flag of object + + + + The base object this component is built upon + The base object this component is built upon + + + + Other shapes that are appended to this object + Other shapes that are appended to this object + + + + Other shapes that are subtracted from this object + Other shapes that are subtracted from this object + + + + An optional description for this component + An optional description for this component + + + + An optional tag for this component + An optional tag for this component + + + + Custom IFC properties and attributes + Custom IFC properties and attributes + + + + A material for this object + A material for this object + + + + The role of this object + The role of this object + + + + Specifies if this object must move together when its host is moved + Specifies if this object must move together when its host is moved + + + + has no solid + Heeft geen solid + + + + has an invalid shape + heeft een ongeldige vorm + + + + has a null shape + heeft een null vorm + + + + Cutting + Snijden + + + + You must select a base object first! + U moet eerst een basisobject selecteren! + + + + Create Equipment + Create Equipment + + + + You must select exactly one base object + U moet precies één basisobject selecteren + + + + The selected object must be a mesh + The selected object must be a mesh + + + + This mesh has more than 1000 facets. + This mesh has more than 1000 facets. + + + + This operation can take a long time. Proceed? + This operation can take a long time. Proceed? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + The mesh has more than 500 facets. This will take a couple of minutes... + + + + Create 3 views + Create 3 views + + + + an optional 2D shape representing a top view of this equipment + an optional 2D shape representing a top view of this equipment + + + + an optional 2D shape representing a front view of this equipment + an optional 2D shape representing a front view of this equipment + + + + an optional 2D shape representing a side view of this equipment + an optional 2D shape representing a side view of this equipment + + + + The model description of this equipment + The model description of this equipment + + + + The url of the product page of this equipment + The url of the product page of this equipment + + + + Create Panel + Create Panel + + + + Panel options + Panel options + + + + The thickness or extrusion depth of this element + The thickness or extrusion depth of this element + + + + The number of sheets to use + The number of sheets to use + + + + The offset between this panel and its baseline + The offset between this panel and its baseline + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + + + + Id + Id + + + + IdRel + IdRel + + + + If false, non-solids will be cut too, with possible wrong results. + If false, non-solids will be cut too, with possible wrong results. + + + + The display length of this section plane + The display length of this section plane + + + + The display height of this section plane + The display height of this section plane + + + + The size of the arrows of this section plane + The size of the arrows of this section plane + + + + The computed floor area of this space + The computed floor area of this space + + + + The finishing of the floor of this space + The finishing of the floor of this space + + + + The finishing of the walls of this space + The finishing of the walls of this space + + + + The finishing of the ceiling of this space + The finishing of the ceiling of this space + + + + Objects that are included inside this space, such as furniture + Objects that are included inside this space, such as furniture + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + + + + The name of the font + De naam van het lettertype + + + + The color of the area text + The color of the area text + + + + The size of the text font + The size of the text font + + + + The size of the first line of text + The size of the first line of text + + + + The space between the lines of text + The space between the lines of text + + + + The position of the text. Leave (0,0,0) for automatic position + The position of the text. Leave (0,0,0) for automatic position + + + + The justification of the text + De uitvulling van de tekst + + + + The number of decimals to use for calculated texts + The number of decimals to use for calculated texts + + + + Show the unit suffix + Show the unit suffix + + + + A description of the standard profile this element is based upon + A description of the standard profile this element is based upon + + + + Sill height + Sill height + + + + CutVolume + CutVolume + + + + CutPlane + CutPlane + + + + PreviewCutVolume + PreviewCutVolume + + + + Cut Plane + Cut Plane + + + + Cut Plane options + Cut Plane options + + + + Wich side to cut + Wich side to cut + + + + Behind + Behind + + + + Front + Voorkant + + + + Crossing point not found in profile. + + Crossing point not found in profile. + + + + + A list of angles for each roof pane + A list of angles for each roof pane + + + + A list of horizontal length projections for each roof pane + A list of horizontal length projections for each roof pane + + + + A list of IDs of relative profiles for each roof pane + A list of IDs of relative profiles for each roof pane + + + + A list of thicknesses for each roof pane + A list of thicknesses for each roof pane + + + + A list of overhangs for each roof pane + A list of overhangs for each roof pane + + + + A list of calculated heights for each roof pane + A list of calculated heights for each roof pane + + + + Angle (deg) + Angle (deg) + + + + Run (mm) + Run (mm) + + + + Thickness (mm) + Thickness (mm) + + + + Overhang (mm) + Overhang (mm) + + + + Height (mm) + Height (mm) + + + + Arch_3Views + + + 3 views from mesh + 3 views from mesh + + + + Creates 3 views (top, front, side) from a mesh-based object + Creates 3 views (top, front, side) from a mesh-based object + Arch_Add - + Add component Voeg component toe - + Adds the selected components to the active object De geselecteerde onderdelen toevoegen aan het actieve object @@ -889,12 +1228,12 @@ Arch_Axis - + Axis As - + Creates an axis system. Maakt een assensysteem aan. @@ -902,12 +1241,12 @@ Arch_Building - + Building Gebouw - + Creates a building object including selected objects. Maakt een gebouwobject inclusief geselecteerde objecten. @@ -915,17 +1254,17 @@ Arch_Check - + Check Controleer - + Checks the selected objects for problems Controleer de geselecteerde objecten op problemen - + Explore the contents of an Ifc file Explore the contents of an Ifc file @@ -933,18 +1272,41 @@ Arch_CloseHoles - + Close holes Sluit gaten - + Closes holes in open shapes, turning them solids Closes holes in open shapes, turning them solids - Arch_Fixture + Arch_CutPlane + + + Cut with plane + Cut with plane + + + + Cut an object with a plane + Cut an object with a plane + + + + Arch_Equipment + + + Equipment + Equipment + + + + Creates an equipment object from a selected object (Part or Mesh) + Creates an equipment object from a selected object (Part or Mesh) + Arch_Floor @@ -962,12 +1324,12 @@ Arch_Frame - + Frame Frame - + Creates a frame object from a planar 2D object and a profile Creates a frame object from a planar 2D object and a profile @@ -975,7 +1337,7 @@ Arch_IfcExplorer - + Ifc Explorer IFC Explorer @@ -983,12 +1345,12 @@ Arch_MergeWalls - + Merge Walls Muren samenvoegen - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -996,25 +1358,38 @@ Arch_MeshToShape - + Mesh to Shape Net naar Vorm - + Turns selected meshes into Part Shape objects Turns selected meshes into Part Shape objects + + Arch_Panel + + + Panel + Panel + + + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + + Arch_Rebar - + Rebar Wapening - + Creates a Reinforcement bar from the selected face of a structural object Creates a Reinforcement bar from the selected face of a structural object @@ -1022,12 +1397,12 @@ Arch_Remove - + Remove component Verwijderen component - + Remove the selected components from their parents, or create a hole in a component Verwijder de geselecteerde onderdelen van hun ouders, of maak een gat in een component @@ -1035,12 +1410,12 @@ Arch_RemoveShape - + Remove Shape from Arch Vorm verwijderen - + Removes cubic shapes from Arch components Verwijdert kubieke vormen uit Arch-componenten @@ -1048,25 +1423,25 @@ Arch_Roof - + Roof Dak - - Creates a roof object from the selected face of an object - Creates a roof object from the selected face of an object + + Creates a roof object from the selected wire. + Creates a roof object from the selected wire. Arch_SectionPlane - + Section Plane Sectieplan - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects @@ -1074,12 +1449,12 @@ Arch_SelectNonSolidMeshes - + Select non-manifold meshes Niet-manifold netten selecteren - + Selects all non-manifold meshes from the document or from the selected groups Selecteert alle niet-manifold netten van het document of van de geselecteerde groepen @@ -1087,12 +1462,12 @@ Arch_Site - + Site Zijde - + Creates a site object including selected objects. Maakt een bouwterrein object met geselecteerde objecten inbegrepen. @@ -1100,17 +1475,17 @@ Arch_Space - + Space Ruimte - + Creates a space object from selected boundary objects Creates a space object from selected boundary objects - + Creates a stairs object Maakt een trap @@ -1118,12 +1493,12 @@ Arch_SplitMesh - + Split Mesh Net splitten - + Splits selected meshes into independent components Splits geselecteerde netten in onafhankelijke componenten @@ -1131,7 +1506,7 @@ Arch_Stairs - + Stairs Trap @@ -1139,12 +1514,12 @@ Arch_Structure - + Structure Structuur - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Maak een structuurobject vanaf nul of van een geselecteerd object (schets, draad, vlak of volume) @@ -1152,25 +1527,38 @@ Arch_Survey - + Survey Survey - + Starts survey Starts survey + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Toggle IFC Brep flag + + + + Force an object to be exported as Brep or not + Force an object to be exported as Brep or not + + Arch_Wall - + Wall Muur - + Creates a wall object from scratch or from a selected object (wire, face or solid) Maak een muurobject vanaf nul of van een geselecteerd object (draad, vlak of volume) @@ -1178,12 +1566,12 @@ Arch_Window - + Window Venster - + Creates a window object from a selected object (wire, rectangle or sketch) Creates a window object from a selected object (wire, rectangle or sketch) @@ -1210,16 +1598,6 @@ IFC import IFC import - - - Creates groups for each Arch object type - Creates groups for each Arch object type - - - - Group components by types - Group components by types - 2D rendering @@ -1246,22 +1624,22 @@ Specifies how many times the viewed line thickness must be applied to cut lines - + Width: Breedte: - + Height: Hoogte: - + Color: Kleur: - + Length: Lengte: @@ -1375,11 +1753,6 @@ Cut method Cut method - - - Import / export - Importeren / exporteren - Check this to display debug messages while importing IFC files @@ -1392,74 +1765,44 @@ - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - - - - Force python parser - Force python parser - - - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - + Separate openings Separate openings - + If this is checked, object names will be prefixed with the IFC ID number If this is checked, object names will be prefixed with the IFC ID number - + Prefix names with ID number Prefix names with ID number - + Exclude list: Exclude list: - + A comma-separated list of Ifc entities to exclude from import A comma-separated list of Ifc entities to exclude from import - - Custom IFC schema (internal parser only) - Custom IFC schema (internal parser only) - - - + IFC export IFC export - + Scaling factor Scaling factor - - - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - - - - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - - - - Save a list of exported objects - Save a list of exported objects - Snap to baselines of Arch objects (override with CTRL) @@ -1468,7 +1811,7 @@ Defaults - Defaults + Standaardwaarden @@ -1476,7 +1819,7 @@ Walls - + mm mm @@ -1501,95 +1844,103 @@ Transparantie: - - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - - - - Separate placements - Separate placements - - - - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - - - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. - - Force export as Breps - Force export as Breps - - - - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - - - - Join multi-solid objects - Join multi-solid objects - - - + Collada export Collada export - - WebGL export - WebGL export + + Hidden geomety pattern + Hidden geomety pattern - - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + This is the SVG stroke-dasharray property to apply to projections of hidden objects. - - Discretize wires - Discretize wires + + 30, 10 + 30, 10 + + + + Stairs + Trap + + + + Number of steps: + Number of steps: + + + + Panels + Panels + + + + mm + mm + + + + Thickness + Dikte + + + + IFC / DAE / WebGL + IFC / DAE / WebGL + + + + Force export as Brep + Force export as Brep + + + + Workbench + + + Arch tools + Arch tools + + + + Draft tools + Draft tools + + + + Draft mod tools + Draft mod tools arch - - Arch tools - Arch werktuigen - - - - Draft tools - Draft werktuigen - - - - Draft mod tools - Draft mod tools - - - + &Architecture &Architectuur - + &Draft &Draft - + Utilities - Utilities + Hulpmiddelen - + Snapping Snapping diff --git a/src/Mod/Arch/Resources/translations/Arch_no.qm b/src/Mod/Arch/Resources/translations/Arch_no.qm index 81c09d46f7..c8ae72b73d 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_no.qm and b/src/Mod/Arch/Resources/translations/Arch_no.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_no.ts b/src/Mod/Arch/Resources/translations/Arch_no.ts index 8ac8c58b14..1eef88edd6 100644 --- a/src/Mod/Arch/Resources/translations/Arch_no.ts +++ b/src/Mod/Arch/Resources/translations/Arch_no.ts @@ -4,407 +4,362 @@ Arch - + Components Komponenter - + Components of this object Elementer i dette objektet - + Axes Akser - + Create Axis Opprette akse - + The intervals between axes Intervall mellom akser - + The angles of each axis Hver akses vinkel - + The length of the axes Lengden på aksene - + The size of the axis bubbles Aksens boblestørrelse - + Remove Fjern - + Add Legg til - + Axis Akse - + Distance Avstand - + Angle Vinkel - - Building - Bygning - - - + Type conversion Typekonvertering - + Create Building Opprett bygning - + Floor Etasje - + removing sketch support to avoid cross-referencing fjerner skissestøtte for å unngå kryssreferanser - - No objects are cut by the plane - Ingen objekter er kuttet av planet - - - + is not closed er ikke lukket - + is not valid er ikke gyldig - + doesn't contain any solid inneholder ingen solid - + contains a non-closed solid inneholder en ulukket solid - + contains faces that are not part of any solid inneholder flater som ikke er en del av noen solid - + Grouping Gruppering - + Ungrouping Deler opp gruppe - + Split Mesh Del opp nett - + Mesh to Shape Nett til figur - + All good! no problems found Alt vel! Fant ingen problemer - + Base component Grunnkomponent - + Additions Tillegg - + Subtractions Fratrekk - + Objects Objekter - + closing Sketch edit avslutter skisseredigering - + The height of this floor Høyde på denne etasjen - + Roof Tak - + Create Roof Opprett tak - + Unable to create a roof Kan ikke opprette et tak - - The angle of this roof - Vinkel på dette taket - - - + The face number of the base object used to build this roof Antall flater i grunnobjektet som ble brukt til å bygge dette taket - + Page Side - + View of Visning av - + Create Section Plane Lag inndelingsplan - + The objects that must be considered by this section plane. Empty means all document Objektene som må vurderes ved dette inndelingsplanet. Tom betyr hele dokumentet - - The display size of this section plane - Visningsstørrelsen for dette inndelingsplanet - - - - No shape has been computed yet, select wireframe rendering and render again - Ingen form er beregnet ennå, velg trådnettrendering og render på nytt - - - + Skipping invalid object: Hopper over ugyldig objekt: - - Site - Byggeplass - - - + Create Site Opprett byggeplass - - Structure - Struktur - - - + Create Structure Opprett struktur - + The length of this element, if not based on a profile Lengde på dette elementet, hvis ikke basert på en profil - + The width of this element, if not based on a profile Bredde på dette elementet, hvis ikke basert på en profil - + The height or extrusion depth of this element. Keep 0 for automatic Høyde eller ekstruderingsdybde på dette elementet. Behold 0 for automatisk - + Axes systems this structure is built on Aksesystemer denne strukturen er bygget på - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Ekstruderingsens normalplan for dette objektet. Behold (0,0,0) for automatisk normalplan - + The element numbers to exclude when this structure is based on axes Antall elementer å utelate når denne strukturen er basert på akser - - Wall - Vegg - - - + Create Wall Opprett vegg - + WallTrace Grunnlinje - + Wall options Alternativer for vegg - + Width Bredde - + Height Høyde - + Alignment Justering - + The width of this wall. Not used if this wall is based on a face Bredden på denne veggen. Brukes ikke hvis denne veggen er basert på et flate - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Høyde på denne veggen. Holde 0 for automatisk. Brukes ikke hvis denne veggen er basert på en solid - + The alignment of this wall on its base object, if applicable The alignment of this wall on its base object, if applicable - + Error: Invalid base object Error: Invalid base object - + This mesh is an invalid solid This mesh is an invalid solid - - Window - Vindu - - - + Create Window Create Window - + the components of this window the components of this window - + Edit Rediger - + Create/update component Create/update component - + Base 2D object Base 2D object - + Wires Wires - + Create new component Create new component - + Name Navn - + Type Type - + Thickness Thickness - + Z offset Z offset @@ -419,73 +374,68 @@ file %s successfully created. - + Error: Couldn't determine character encoding Error: Couldn't determine character encoding - + Couldn't locate IfcOpenShell Couldn't locate IfcOpenShell - + IFC Schema not found, IFC import disabled. IFC Schema not found, IFC import disabled. - + successfully written successfully written - + The numbering style The numbering style - + removing sketch external references to avoid cross-referencing removing sketch external references to avoid cross-referencing - - Invalid cutplane - Invalid cutplane - - - + Add space boundary Add space boundary - + Remove space boundary Remove space boundary - + Please select a base object Please select a base object - + Fixtures Fixtures - + Armatures Armatures - + The placement of this group The placement of this group @@ -495,171 +445,146 @@ Frame - + Create Frame Create Frame - - Rebar - Rebar - - - + Create Rebar Create Rebar - + Please select a base face on a structural object Please select a base face on a structural object - + Please select a base object Please select a base object - - Section - Seksjon - - - + The placement of this object The placement of this object - + The terrain of this site The terrain of this site - + The address of this site The address of this site - + The geographic coordinates of this site The geographic coordinates of this site - + An url that shows this site in a mapping website An url that shows this site in a mapping website - - Space - Space - - - + Create Space Create Space - - A base shape defining this space - A base shape defining this space - - - + The objects that make the boundaries of this space object The objects that make the boundaries of this space object - - Stairs - Stairs - - - + Create Stairs Create Stairs - + The length of these stairs, if no baseline is defined The length of these stairs, if no baseline is defined - + The width of these stairs The width of these stairs - + The total height of these stairs The total height of these stairs - + The alignment of these stairs on their baseline, if applicable The alignment of these stairs on their baseline, if applicable - + The number of risers in these stairs The number of risers in these stairs - + The depth of the treads of these stairs The depth of the treads of these stairs - + The height of the risers of these stairs The height of the risers of these stairs - + The size of the nosing The size of the nosing - + The thickness of the treads The thickness of the treads - + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in - + The type of landings of these stairs The type of landings of these stairs - + The type of winders in these stairs The type of winders in these stairs - + The type of structure of these stairs The type of structure of these stairs - + The thickness of the massive structure or of the stringers The thickness of the massive structure or of the stringers - + The width of the stringers The width of the stringers - + The offset between the border of the stairs and the structure The offset between the border of the stairs and the structure @@ -674,139 +599,124 @@ Steel - + Structure options Structure options - + Preset Preset - + Length Lengde - + Rotate Roter - + Con&tinue Con&tinue - + An optional extrusion path for this element An optional extrusion path for this element - + Armatures contained in this element Armatures contained in this element - - The role of this structural element - The role of this structural element - - - + The structural nodes of this element The structural nodes of this element - + Error: The base shape couldn't be extruded along this tool object Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape Couldn't compute a shape - + Merge Wall Merge Wall - + The selected wall contain no subwall to merge The selected wall contain no subwall to merge - + Please select only wall objects Please select only wall objects - + Merge Walls Merge Walls - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) - + Pick a face on an existing object or select a preset Pick a face on an existing object or select a preset - + Window options Window options - + The depth of the hole that this window makes in its host object. Keep 0 for automatic. The depth of the hole that this window makes in its host object. Keep 0 for automatic. - - an optional volume to be subtracted from hosts of this window - an optional volume to be subtracted from hosts of this window - - - + The width of this window (for preset windows only) The width of this window (for preset windows only) - + The height of this window (for preset windows only) The height of this window (for preset windows only) - + The normal direction of this window The normal direction of this window - - The role of this window - The role of this window - - - + Unable to create component Unable to create component @@ -820,46 +730,36 @@ - + IfcOpenShell not found or disabled, falling back on internal parser. IfcOpenShell not found or disabled, falling back on internal parser. - + Distances (mm) and angles (deg) between axes Distances (mm) and angles (deg) between axes - + Error computing the shape of this object Error computing the shape of this object - - StructuralSystem - StructuralSystem - - - + Create Structural System Create Structural System - - The role of this wall - The role of this wall - - - + Error: IfcOpenShell is not installed Error: IfcOpenShell is not installed - + Error: your IfcOpenShell version is too old Error: your IfcOpenShell version is too old @@ -872,29 +772,468 @@ Found a shape containing curves, triangulating + + + Invalid cutplane + + Invalid cutplane + + + + + No objects are cut by the plane + + No objects are cut by the plane + + + + + Object doesn't have settable IFC Attributes + Object doesn't have settable IFC Attributes + + + + Disabling Brep force flag of object + Disabling Brep force flag of object + + + + Enabling Brep force flag of object + Enabling Brep force flag of object + + + + The base object this component is built upon + The base object this component is built upon + + + + Other shapes that are appended to this object + Other shapes that are appended to this object + + + + Other shapes that are subtracted from this object + Other shapes that are subtracted from this object + + + + An optional description for this component + An optional description for this component + + + + An optional tag for this component + An optional tag for this component + + + + Custom IFC properties and attributes + Custom IFC properties and attributes + + + + A material for this object + A material for this object + + + + The role of this object + The role of this object + + + + Specifies if this object must move together when its host is moved + Specifies if this object must move together when its host is moved + + + + has no solid + has no solid + + + + has an invalid shape + has an invalid shape + + + + has a null shape + has a null shape + + + + Cutting + Cutting + + + + You must select a base object first! + You must select a base object first! + + + + Create Equipment + Create Equipment + + + + You must select exactly one base object + You must select exactly one base object + + + + The selected object must be a mesh + The selected object must be a mesh + + + + This mesh has more than 1000 facets. + This mesh has more than 1000 facets. + + + + This operation can take a long time. Proceed? + This operation can take a long time. Proceed? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + The mesh has more than 500 facets. This will take a couple of minutes... + + + + Create 3 views + Create 3 views + + + + an optional 2D shape representing a top view of this equipment + an optional 2D shape representing a top view of this equipment + + + + an optional 2D shape representing a front view of this equipment + an optional 2D shape representing a front view of this equipment + + + + an optional 2D shape representing a side view of this equipment + an optional 2D shape representing a side view of this equipment + + + + The model description of this equipment + The model description of this equipment + + + + The url of the product page of this equipment + The url of the product page of this equipment + + + + Create Panel + Create Panel + + + + Panel options + Panel options + + + + The thickness or extrusion depth of this element + The thickness or extrusion depth of this element + + + + The number of sheets to use + The number of sheets to use + + + + The offset between this panel and its baseline + The offset between this panel and its baseline + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + + + + Id + Id + + + + IdRel + IdRel + + + + If false, non-solids will be cut too, with possible wrong results. + If false, non-solids will be cut too, with possible wrong results. + + + + The display length of this section plane + The display length of this section plane + + + + The display height of this section plane + The display height of this section plane + + + + The size of the arrows of this section plane + The size of the arrows of this section plane + + + + The computed floor area of this space + The computed floor area of this space + + + + The finishing of the floor of this space + The finishing of the floor of this space + + + + The finishing of the walls of this space + The finishing of the walls of this space + + + + The finishing of the ceiling of this space + The finishing of the ceiling of this space + + + + Objects that are included inside this space, such as furniture + Objects that are included inside this space, such as furniture + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + + + + The name of the font + The name of the font + + + + The color of the area text + The color of the area text + + + + The size of the text font + The size of the text font + + + + The size of the first line of text + The size of the first line of text + + + + The space between the lines of text + The space between the lines of text + + + + The position of the text. Leave (0,0,0) for automatic position + The position of the text. Leave (0,0,0) for automatic position + + + + The justification of the text + The justification of the text + + + + The number of decimals to use for calculated texts + The number of decimals to use for calculated texts + + + + Show the unit suffix + Show the unit suffix + + + + A description of the standard profile this element is based upon + A description of the standard profile this element is based upon + + + + Sill height + Sill height + + + + CutVolume + CutVolume + + + + CutPlane + CutPlane + + + + PreviewCutVolume + PreviewCutVolume + + + + Cut Plane + Cut Plane + + + + Cut Plane options + Cut Plane options + + + + Wich side to cut + Wich side to cut + + + + Behind + Behind + + + + Front + Front + + + + Crossing point not found in profile. + + Crossing point not found in profile. + + + + + A list of angles for each roof pane + A list of angles for each roof pane + + + + A list of horizontal length projections for each roof pane + A list of horizontal length projections for each roof pane + + + + A list of IDs of relative profiles for each roof pane + A list of IDs of relative profiles for each roof pane + + + + A list of thicknesses for each roof pane + A list of thicknesses for each roof pane + + + + A list of overhangs for each roof pane + A list of overhangs for each roof pane + + + + A list of calculated heights for each roof pane + A list of calculated heights for each roof pane + + + + Angle (deg) + Vinkel (grader) + + + + Run (mm) + Run (mm) + + + + Thickness (mm) + Thickness (mm) + + + + Overhang (mm) + Overhang (mm) + + + + Height (mm) + Height (mm) + + + + Arch_3Views + + + 3 views from mesh + 3 visninger fra mesh + + + + Creates 3 views (top, front, side) from a mesh-based object + Creates 3 views (top, front, side) from a mesh-based object + Arch_Add - + Add component - Add component + Legg til komponent - + Adds the selected components to the active object - Adds the selected components to the active object + Legger til de valgte komponentene i det aktive objektet Arch_Axis - + Axis Akse - + Creates an axis system. Creates an axis system. @@ -902,12 +1241,12 @@ Arch_Building - + Building Building - + Creates a building object including selected objects. Creates a building object including selected objects. @@ -915,17 +1254,17 @@ Arch_Check - + Check Check - + Checks the selected objects for problems Checks the selected objects for problems - + Explore the contents of an Ifc file Explore the contents of an Ifc file @@ -933,18 +1272,41 @@ Arch_CloseHoles - + Close holes Close holes - + Closes holes in open shapes, turning them solids Closes holes in open shapes, turning them solids - Arch_Fixture + Arch_CutPlane + + + Cut with plane + Cut with plane + + + + Cut an object with a plane + Cut an object with a plane + + + + Arch_Equipment + + + Equipment + Equipment + + + + Creates an equipment object from a selected object (Part or Mesh) + Creates an equipment object from a selected object (Part or Mesh) + Arch_Floor @@ -962,12 +1324,12 @@ Arch_Frame - + Frame Frame - + Creates a frame object from a planar 2D object and a profile Creates a frame object from a planar 2D object and a profile @@ -975,7 +1337,7 @@ Arch_IfcExplorer - + Ifc Explorer Ifc Explorer @@ -983,12 +1345,12 @@ Arch_MergeWalls - + Merge Walls Merge Walls - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -996,25 +1358,38 @@ Arch_MeshToShape - + Mesh to Shape Mesh to Shape - + Turns selected meshes into Part Shape objects Turns selected meshes into Part Shape objects + + Arch_Panel + + + Panel + Panel + + + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + + Arch_Rebar - + Rebar Rebar - + Creates a Reinforcement bar from the selected face of a structural object Creates a Reinforcement bar from the selected face of a structural object @@ -1022,12 +1397,12 @@ Arch_Remove - + Remove component Remove component - + Remove the selected components from their parents, or create a hole in a component Remove the selected components from their parents, or create a hole in a component @@ -1035,12 +1410,12 @@ Arch_RemoveShape - + Remove Shape from Arch Remove Shape from Arch - + Removes cubic shapes from Arch components Removes cubic shapes from Arch components @@ -1048,25 +1423,25 @@ Arch_Roof - + Roof Tak - - Creates a roof object from the selected face of an object - Creates a roof object from the selected face of an object + + Creates a roof object from the selected wire. + Creates a roof object from the selected wire. Arch_SectionPlane - + Section Plane Section Plane - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects @@ -1074,12 +1449,12 @@ Arch_SelectNonSolidMeshes - + Select non-manifold meshes Select non-manifold meshes - + Selects all non-manifold meshes from the document or from the selected groups Selects all non-manifold meshes from the document or from the selected groups @@ -1087,12 +1462,12 @@ Arch_Site - + Site Site - + Creates a site object including selected objects. Creates a site object including selected objects. @@ -1100,17 +1475,17 @@ Arch_Space - + Space Space - + Creates a space object from selected boundary objects Creates a space object from selected boundary objects - + Creates a stairs object Creates a stairs object @@ -1118,12 +1493,12 @@ Arch_SplitMesh - + Split Mesh Split Mesh - + Splits selected meshes into independent components Splits selected meshes into independent components @@ -1131,7 +1506,7 @@ Arch_Stairs - + Stairs Stairs @@ -1139,12 +1514,12 @@ Arch_Structure - + Structure Structure - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) @@ -1152,25 +1527,38 @@ Arch_Survey - + Survey Survey - + Starts survey Starts survey + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Toggle IFC Brep flag + + + + Force an object to be exported as Brep or not + Force an object to be exported as Brep or not + + Arch_Wall - + Wall Wall - + Creates a wall object from scratch or from a selected object (wire, face or solid) Creates a wall object from scratch or from a selected object (wire, face or solid) @@ -1178,12 +1566,12 @@ Arch_Window - + Window Vindu - + Creates a window object from a selected object (wire, rectangle or sketch) Creates a window object from a selected object (wire, rectangle or sketch) @@ -1210,20 +1598,10 @@ IFC import IFC import - - - Creates groups for each Arch object type - Creates groups for each Arch object type - - - - Group components by types - Group components by types - 2D rendering - 2D rendering + 2D-gjengivelse @@ -1246,22 +1624,22 @@ Specifies how many times the viewed line thickness must be applied to cut lines - + Width: Bredde: - + Height: Høyde: - + Color: Color: - + Length: Lengde: @@ -1375,11 +1753,6 @@ Cut method Cut method - - - Import / export - Import / export - Check this to display debug messages while importing IFC files @@ -1392,74 +1765,44 @@ - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - - - - Force python parser - Force python parser - - - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - + Separate openings Separate openings - + If this is checked, object names will be prefixed with the IFC ID number If this is checked, object names will be prefixed with the IFC ID number - + Prefix names with ID number Prefix names with ID number - + Exclude list: Exclude list: - + A comma-separated list of Ifc entities to exclude from import A comma-separated list of Ifc entities to exclude from import - - Custom IFC schema (internal parser only) - Custom IFC schema (internal parser only) - - - + IFC export IFC export - + Scaling factor Scaling factor - - - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - - - - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - - - - Save a list of exported objects - Save a list of exported objects - Snap to baselines of Arch objects (override with CTRL) @@ -1476,7 +1819,7 @@ Walls - + mm mm @@ -1501,95 +1844,103 @@ Gjennomsiktighet: - - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - - - - Separate placements - Separate placements - - - - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - - - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. - - Force export as Breps - Force export as Breps - - - - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - - - - Join multi-solid objects - Join multi-solid objects - - - + Collada export Collada export - - WebGL export - WebGL export + + Hidden geomety pattern + Hidden geomety pattern - - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + This is the SVG stroke-dasharray property to apply to projections of hidden objects. - - Discretize wires - Discretize wires + + 30, 10 + 30, 10 + + + + Stairs + Stairs + + + + Number of steps: + Number of steps: + + + + Panels + Panels + + + + mm + mm + + + + Thickness + Thickness + + + + IFC / DAE / WebGL + IFC / DAE / WebGL + + + + Force export as Brep + Force export as Brep + + + + Workbench + + + Arch tools + Arch tools + + + + Draft tools + Draft tools + + + + Draft mod tools + Draft mod tools arch - - Arch tools - Arch tools - - - - Draft tools - Draft tools - - - - Draft mod tools - Draft mod tools - - - + &Architecture &Architecture - + &Draft &Draft - + Utilities Utilities - + Snapping Snapping diff --git a/src/Mod/Arch/Resources/translations/Arch_pl.qm b/src/Mod/Arch/Resources/translations/Arch_pl.qm index 8b6367dda2..2b3e151ad1 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_pl.qm and b/src/Mod/Arch/Resources/translations/Arch_pl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_pl.ts b/src/Mod/Arch/Resources/translations/Arch_pl.ts index 531c41a4f1..dfdbf5cb31 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pl.ts @@ -4,407 +4,362 @@ Arch - + Components komponenty - + Components of this object Składniki obiektu - + Axes Osie - + Create Axis Utwórz Osie - + The intervals between axes Odstęp pomiędzy osiami - + The angles of each axis Kąty każdej osi - + The length of the axes Długość osi - + The size of the axis bubbles Rozmiar bąbelków osi - + Remove Usuń - + Add Dodaj - + Axis Oś - + Distance Odległość - + Angle Kąt - - Building - Budynek - - - + Type conversion Typ konwersji - + Create Building Tworzenie budynku - + Floor Piętro - + removing sketch support to avoid cross-referencing usuwanie wsparcia dla szkicu aby uniknąć krzyżowego powiązania - - No objects are cut by the plane - Żaden obiekt nie jest wycinany przez płaszczyznę - - - + is not closed nie jest zamknięty - + is not valid nie jest prawidłowy - + doesn't contain any solid nie zawiera żadnych stałych - + contains a non-closed solid zawiera niezamknięte stałe - + contains faces that are not part of any solid zawiera fronty, które nie są częścią żadnych stałych - + Grouping Grupowanie - + Ungrouping Rozgrupowanie - + Split Mesh Rozdziel siatkę - + Mesh to Shape Zazębia oczka siatki do kształtu - + All good! no problems found Wszystko w porządku! Nie znaleziono żadnych problemów - + Base component Podstawowy składnik - + Additions Dodatki - + Subtractions Różnice - + Objects Obiekty - + closing Sketch edit zamknięcie edycji szkicu - + The height of this floor Wysokość obecnego piętra - + Roof Dach - + Create Roof Tworzenie dachu - + Unable to create a roof Nie można utworzyć dachu - - The angle of this roof - Kąt dachu - - - + The face number of the base object used to build this roof Liczba frontów obiektu podstawowego użytych do zbudowania tego dachu - + Page Strona - + View of Widok - + Create Section Plane Tworzenie płaszczyzny przekroju - + The objects that must be considered by this section plane. Empty means all document Obiekty które muszą być wzięte pod uwagę w tej płaszczyźnie przekroju. Wartość pusta oznacza cały dokument - - The display size of this section plane - Rozmiar wyświetlania płaszczyzny sekcji - - - - No shape has been computed yet, select wireframe rendering and render again - Żaden kształt nie został jeszcze przetworzony, wybierz model szkieletowy renderowania i renderuj ponownie - - - + Skipping invalid object: Pominięcie nieprawidłowego obiektu: - - Site - Teren - - - + Create Site Tworzenie witryny - - Structure - Konstrukcja - - - + Create Structure Tworzenie struktury - + The length of this element, if not based on a profile Długość tego elementu, jeśli nie w oparciu o profil - + The width of this element, if not based on a profile Szerokość tego elementu, jeśli nie w oparciu o profil - + The height or extrusion depth of this element. Keep 0 for automatic Wysokość lub wyciągnięcie głębokości tego elementu. Zachowaj 0 dla automatycznej - + Axes systems this structure is built on Systemy osi, ta struktura jest zbudowana na - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Normalny kierunek wytłaczania tego obiektu (utrzymaj (0,0,0) dla typowego automatycznie) - + The element numbers to exclude when this structure is based on axes Numery elementu są do wykluczenia, gdy struktura ta opiera się na osiach - - Wall - Ściana - - - + Create Wall Utwórz ścianę - + WallTrace Ślad ściany - + Wall options Opcje ściany - + Width Szerokość - + Height Wysokość - + Alignment Wyrównanie - + The width of this wall. Not used if this wall is based on a face Szerokość tej ściany. Nieużywane, jeżeli ściana ta oparta jest na froncie - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Wysokość ściany. Zachowaj 0 dla autouzupełniania. Nie używane, jeżeli ta ściana opiera się na stałych - + The alignment of this wall on its base object, if applicable Wyrównanie ściany do głównego obiektu, jeśli możliwe do zastosowania - + Error: Invalid base object Błąd: Nieprawidłowy obiekt podstawowy - + This mesh is an invalid solid Ta siatka nie jest poprawna - - Window - Okno - - - + Create Window Utwórz Okno - + the components of this window składniki tego okna - + Edit Edytuj - + Create/update component Utwórz/uaktualnij komponent - + Base 2D object Podstawowy obiekt 2D - + Wires Przewody - + Create new component Utwórz nowy komponent - + Name Nazwa - + Type Typ - + Thickness Grubość - + Z offset offset Z @@ -419,247 +374,216 @@ plik %s utworzony pomyślnie. - + Error: Couldn't determine character encoding Błąd: Nie można określić kodowania znaków - + Couldn't locate IfcOpenShell Nie można zlokalizować IfcOpenShell - + IFC Schema not found, IFC import disabled. nie znaleziono schematu IFC, IFC został wyłączony. - + successfully written zapisano pomyślnie - + The numbering style Styl numeracji - + removing sketch external references to avoid cross-referencing - removing sketch external references to avoid cross-referencing + Usuwa zewnętrzne odwołania szkicu, żeby uniknąć wielokrotnych odwołań - - Invalid cutplane - Invalid cutplane - - - + Add space boundary - Add space boundary + Dodaj granicę przestrzni - + Remove space boundary - Remove space boundary + Usuń granicę przestrzeni - + Please select a base object - Please select a base object + Wybierz obiekt bazowy - + Fixtures - Fixtures + Okucia - + Armatures - Armatures + Części montażowe - + The placement of this group - The placement of this group + Położenie grupy Frame - Frame + Rama - + Create Frame - Create Frame + Utwórz ramę - - Rebar - Rebar - - - + Create Rebar - Create Rebar + Stwórz Zbrojenie - + Please select a base face on a structural object - Please select a base face on a structural object + Zaznacz płaszczyznę podstawy na obiekcie konstrukcyjnym - - - Please select a base object - - Please select a base object - - - - - Section - Iloraz - - - - The placement of this object - The placement of this object - - - - The terrain of this site - The terrain of this site - - - - The address of this site - The address of this site - - - - The geographic coordinates of this site - The geographic coordinates of this site - - - - An url that shows this site in a mapping website - An url that shows this site in a mapping website - - - - Space - Space - - - - Create Space - Create Space - - - - A base shape defining this space - A base shape defining this space - + Please select a base object + + Proszę wybrać obiekt bazowy + + + + The placement of this object + Położenie danego obiektu + + + + The terrain of this site + Na terenie obiektu + + + + The address of this site + Adres danej strony + + + + The geographic coordinates of this site + Położenie geograficzne podanej strony + + + + An url that shows this site in a mapping website + Adres url, który pokazuje tą stronę w witrynie internetowej + + + + Create Space + Utwórz przestrzeń + + + The objects that make the boundaries of this space object - The objects that make the boundaries of this space object + Obiekty wyznaczają granicę w przestrzeni tego obiektu - - Stairs - Schody - - - + Create Stairs Tworzenie schodów - + The length of these stairs, if no baseline is defined - The length of these stairs, if no baseline is defined + Długość schodów, jeśli linia bazowa nie jest wyznaczona - + The width of these stairs Szerokość tych schodów - + The total height of these stairs Całkowita wysokość tych schodów - + The alignment of these stairs on their baseline, if applicable - The alignment of these stairs on their baseline, if applicable + Wyrównanie tych schodów do ich linii bazowej, jeśli dotyczy - + The number of risers in these stairs - The number of risers in these stairs + Liczba stopni w tych schodach - + The depth of the treads of these stairs - The depth of the treads of these stairs + Głębokość stopnicy tych schodów - + The height of the risers of these stairs - The height of the risers of these stairs + Wysokość stopni w tych schodach - + The size of the nosing - The size of the nosing + Wielkość noska - + The thickness of the treads - The thickness of the treads + Grubość stopnicy - + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in - The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in + Stosunek Blondel, musi być pomiędzy 62 a 64cm albo 24.5 i 25.5 cala - + The type of landings of these stairs - The type of landings of these stairs + Typ spocznika tych schodów - + The type of winders in these stairs - The type of winders in these stairs + Typ spocznika w tych schodach - + The type of structure of these stairs - The type of structure of these stairs + Typ struktury tych schodów - + The thickness of the massive structure or of the stringers - The thickness of the massive structure or of the stringers + Grubość struktur podłużnic schodów - + The width of the stringers - The width of the stringers + Szerokość policzków (wang) - + The offset between the border of the stairs and the structure - The offset between the border of the stairs and the structure + Odsunięcie pomiędzy granicą schodów a strukturą @@ -672,214 +596,626 @@ Stal - + Structure options - Structure options + Opcje struktury - + Preset - Preset + Ustawienia - + Length Długość - + Rotate Obróć - + Con&tinue - Con&tinue + Kontynuuj - + An optional extrusion path for this element - An optional extrusion path for this element + Opcjonalna ścieżka wyciągnięcia dla tego elementu - + Armatures contained in this element - Armatures contained in this element + Armatura zawarta w tym elemencie - - The role of this structural element - The role of this structural element - - - + The structural nodes of this element - The structural nodes of this element + Węzły konstrukcyjne tego elementu - + Error: The base shape couldn't be extruded along this tool object - Error: The base shape couldn't be extruded along this tool object + Błąd: Krzywa bazowa nie może być wyciągnięta za pomocą tego narzędzia wzdłuż obiektu - + Couldn't compute a shape - Couldn't compute a shape + Nie można obliczyć kształtu - + Merge Wall - Merge Wall + Połącz ścianę - + The selected wall contain no subwall to merge - The selected wall contain no subwall to merge + Wybrana ściana nie zawiera podściany do połączenia - + Please select only wall objects - Please select only wall objects + Proszę wybrać tylko elementy typu ściana - + Merge Walls - Merge Walls + Połącz ściany - + The length of this wall. Not used if this wall is based on an underlying object - The length of this wall. Not used if this wall is based on an underlying object + Długość tej ściany. Nie używana, jeśli ta ściana jest oparta na obiekcie leżącym w podstawie - + The face number of the base object used to build this wall - The face number of the base object used to build this wall + Liczba powierzchni na podstawie obiektu użytych do budowy tej ściany - + The offset between this wall and its baseline (only for left and right alignments) - The offset between this wall and its baseline (only for left and right alignments) + Odsunięcie między tą ścianą a jej linią bazową (tylko dla wyrównania z prawej lub lewej) - + Pick a face on an existing object or select a preset - Pick a face on an existing object or select a preset + Wybierz płaszczyznę na istniejącym obiekcie albo wybierz zdefiniowane - + Window options - Window options + Opcje okna - + The depth of the hole that this window makes in its host object. Keep 0 for automatic. - The depth of the hole that this window makes in its host object. Keep 0 for automatic. + Głębokość dziury jaką tworzy to okno w wybranym obiekcie. Domyślnie ustawia jako 0. - - an optional volume to be subtracted from hosts of this window - an optional volume to be subtracted from hosts of this window - - - + The width of this window (for preset windows only) - The width of this window (for preset windows only) + Szerokość tego okna (tylko dla ustawień wstępnych okien) - + The height of this window (for preset windows only) - The height of this window (for preset windows only) + Wysokość tego okna (tylko dla ustawień wstępnych okien) - + The normal direction of this window - The normal direction of this window + Normalny kierunek względem tego okna - - The role of this window - The role of this window - - - + Unable to create component - Unable to create component - + Nie można utworzyć komponentu pycollada not found, collada support is disabled. - pycollada not found, collada support is disabled. + nie znaleziono pycollada, obsługa collada jest wyłączona. - + IfcOpenShell not found or disabled, falling back on internal parser. - IfcOpenShell not found or disabled, falling back on internal parser. + IfcOpenShell nie znaleziony albo wyłączony, odwołanie się do wewnętrznego parsera. - + Distances (mm) and angles (deg) between axes - Distances (mm) and angles (deg) between axes + Odległości (mm) i kąty (stopnie) pomiędzy osiami - + Error computing the shape of this object - Error computing the shape of this object + Błąd obliczeń kształtu tego obiektu - - StructuralSystem - StructuralSystem - - - + Create Structural System - Create Structural System + Stwórz System Konstrukcyjny - - The role of this wall - The role of this wall - - - + Error: IfcOpenShell is not installed - Error: IfcOpenShell is not installed + Błąd: lfcOpenShell nie jest zainstalowany - + Error: your IfcOpenShell version is too old - Error: your IfcOpenShell version is too old - + Błąd: Używana wersja IfcOpenShell jest za stara Found a shape containing curves, triangulating - Found a shape containing curves, triangulating + Znaleziono kształt zawierający krzywe, następuje triangulacja + + + Invalid cutplane + + Invalid cutplane + + + + + No objects are cut by the plane + + No objects are cut by the plane + + + + + Object doesn't have settable IFC Attributes + Object doesn't have settable IFC Attributes + + + + Disabling Brep force flag of object + Disabling Brep force flag of object + + + + Enabling Brep force flag of object + Enabling Brep force flag of object + + + + The base object this component is built upon + The base object this component is built upon + + + + Other shapes that are appended to this object + Other shapes that are appended to this object + + + + Other shapes that are subtracted from this object + Other shapes that are subtracted from this object + + + + An optional description for this component + An optional description for this component + + + + An optional tag for this component + An optional tag for this component + + + + Custom IFC properties and attributes + Custom IFC properties and attributes + + + + A material for this object + A material for this object + + + + The role of this object + The role of this object + + + + Specifies if this object must move together when its host is moved + Specifies if this object must move together when its host is moved + + + + has no solid + has no solid + + + + has an invalid shape + has an invalid shape + + + + has a null shape + has a null shape + + + + Cutting + Cutting + + + + You must select a base object first! + You must select a base object first! + + + + Create Equipment + Create Equipment + + + + You must select exactly one base object + You must select exactly one base object + + + + The selected object must be a mesh + The selected object must be a mesh + + + + This mesh has more than 1000 facets. + This mesh has more than 1000 facets. + + + + This operation can take a long time. Proceed? + This operation can take a long time. Proceed? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + The mesh has more than 500 facets. This will take a couple of minutes... + + + + Create 3 views + Create 3 views + + + + an optional 2D shape representing a top view of this equipment + an optional 2D shape representing a top view of this equipment + + + + an optional 2D shape representing a front view of this equipment + an optional 2D shape representing a front view of this equipment + + + + an optional 2D shape representing a side view of this equipment + an optional 2D shape representing a side view of this equipment + + + + The model description of this equipment + The model description of this equipment + + + + The url of the product page of this equipment + The url of the product page of this equipment + + + + Create Panel + Create Panel + + + + Panel options + Panel options + + + + The thickness or extrusion depth of this element + The thickness or extrusion depth of this element + + + + The number of sheets to use + The number of sheets to use + + + + The offset between this panel and its baseline + The offset between this panel and its baseline + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + + + + Id + Id + + + + IdRel + IdRel + + + + If false, non-solids will be cut too, with possible wrong results. + If false, non-solids will be cut too, with possible wrong results. + + + + The display length of this section plane + The display length of this section plane + + + + The display height of this section plane + The display height of this section plane + + + + The size of the arrows of this section plane + The size of the arrows of this section plane + + + + The computed floor area of this space + The computed floor area of this space + + + + The finishing of the floor of this space + The finishing of the floor of this space + + + + The finishing of the walls of this space + The finishing of the walls of this space + + + + The finishing of the ceiling of this space + The finishing of the ceiling of this space + + + + Objects that are included inside this space, such as furniture + Objects that are included inside this space, such as furniture + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + + + + The name of the font + The name of the font + + + + The color of the area text + The color of the area text + + + + The size of the text font + The size of the text font + + + + The size of the first line of text + The size of the first line of text + + + + The space between the lines of text + The space between the lines of text + + + + The position of the text. Leave (0,0,0) for automatic position + The position of the text. Leave (0,0,0) for automatic position + + + + The justification of the text + The justification of the text + + + + The number of decimals to use for calculated texts + The number of decimals to use for calculated texts + + + + Show the unit suffix + Show the unit suffix + + + + A description of the standard profile this element is based upon + A description of the standard profile this element is based upon + + + + Sill height + Sill height + + + + CutVolume + CutVolume + + + + CutPlane + CutPlane + + + + PreviewCutVolume + PreviewCutVolume + + + + Cut Plane + Cut Plane + + + + Cut Plane options + Cut Plane options + + + + Wich side to cut + Wich side to cut + + + + Behind + Behind + + + + Front + Przód + + + + Crossing point not found in profile. + + Crossing point not found in profile. + + + + + A list of angles for each roof pane + A list of angles for each roof pane + + + + A list of horizontal length projections for each roof pane + A list of horizontal length projections for each roof pane + + + + A list of IDs of relative profiles for each roof pane + A list of IDs of relative profiles for each roof pane + + + + A list of thicknesses for each roof pane + A list of thicknesses for each roof pane + + + + A list of overhangs for each roof pane + A list of overhangs for each roof pane + + + + A list of calculated heights for each roof pane + A list of calculated heights for each roof pane + + + + Angle (deg) + Angle (deg) + + + + Run (mm) + Run (mm) + + + + Thickness (mm) + Thickness (mm) + + + + Overhang (mm) + Overhang (mm) + + + + Height (mm) + Height (mm) + + + + Arch_3Views + + + 3 views from mesh + 3 views from mesh + + + + Creates 3 views (top, front, side) from a mesh-based object + Creates 3 views (top, front, side) from a mesh-based object + Arch_Add - + Add component Dodaj składnik - + Adds the selected components to the active object Dodaje wybrane składniki do aktywnego obiektu @@ -887,12 +1223,12 @@ Arch_Axis - + Axis Oś - + Creates an axis system. Tworzy system osi. @@ -900,12 +1236,12 @@ Arch_Building - + Building Budynek - + Creates a building object including selected objects. Tworzy obiekt Budynek wraz z wybranymi obiektami @@ -913,36 +1249,59 @@ Arch_Check - + Check Sprawdź - + Checks the selected objects for problems Sprawdza zaznaczone obiekty czy nie zawierają błędów - + Explore the contents of an Ifc file - Explore the contents of an Ifc file + Rozstrzel zawartość pliku Ifc Arch_CloseHoles - + Close holes Zamknij otwory - + Closes holes in open shapes, turning them solids Zamyka otwory kształtów otwartych, zmienia je do stałych - Arch_Fixture + Arch_CutPlane + + + Cut with plane + Cut with plane + + + + Cut an object with a plane + Cut an object with a plane + + + + Arch_Equipment + + + Equipment + Equipment + + + + Creates an equipment object from a selected object (Part or Mesh) + Creates an equipment object from a selected object (Part or Mesh) + Arch_Floor @@ -960,72 +1319,85 @@ Arch_Frame - + Frame - Frame + Rama - + Creates a frame object from a planar 2D object and a profile - Creates a frame object from a planar 2D object and a profile + Tworzy obiekt Rama z płaskiego obiektu 2d i profili Arch_IfcExplorer - + Ifc Explorer - Ifc Explorer + Eksplorator Ifc Arch_MergeWalls - + Merge Walls - Merge Walls + Połącz ściany - + Merges the selected walls, if possible - Merges the selected walls, if possible + Połącz wybrane ściany, jeśli możliwe Arch_MeshToShape - + Mesh to Shape Zazębia oczka siatki do kształtu - + Turns selected meshes into Part Shape objects Włącza wybrane oczka w części kształtu obiektów - Arch_Rebar + Arch_Panel - - Rebar - Rebar + + Panel + Panel - + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + + + + Arch_Rebar + + + Rebar + Zbrojenie + + + Creates a Reinforcement bar from the selected face of a structural object - Creates a Reinforcement bar from the selected face of a structural object + Tworzy pręt zbrojeniowy z wybranych powierzchni konstrukcyjnych obiektu Arch_Remove - + Remove component Usuń składnik - + Remove the selected components from their parents, or create a hole in a component Usuń wybrane składniki z rodzimego elementu lub utwórz otwór w składniku @@ -1033,12 +1405,12 @@ Arch_RemoveShape - + Remove Shape from Arch Usuń Kształt z łuku - + Removes cubic shapes from Arch components Usuwa sześcienne kształty ze składników łuku @@ -1046,25 +1418,25 @@ Arch_Roof - + Roof Dach - - Creates a roof object from the selected face of an object - Tworzy obiekt dachu od wybranego frontu obiektu + + Creates a roof object from the selected wire. + Creates a roof object from the selected wire. Arch_SectionPlane - + Section Plane Płaszczyzna przekroju - + Creates a section plane object, including the selected objects Tworzy obiekt płaszczyzny przekroju, łącznie z wybranymi obiektami @@ -1072,12 +1444,12 @@ Arch_SelectNonSolidMeshes - + Select non-manifold meshes Wybierz nieróżnorodne siatki - + Selects all non-manifold meshes from the document or from the selected groups Wybiera wszystkie nieróżnorodne siatki z dokumentu lub wybranych grup @@ -1085,12 +1457,12 @@ Arch_Site - + Site Teren - + Creates a site object including selected objects. Tworzy obiekt Teren wraz z wybranymi obiektami @@ -1098,30 +1470,30 @@ Arch_Space - + Space - Space + Przestrzeń - + Creates a space object from selected boundary objects - Creates a space object from selected boundary objects + Tworzy przestrzeń obiektu z wybranych obwiedni - + Creates a stairs object - Creates a stairs object + Tworzy obiekt schody Arch_SplitMesh - + Split Mesh Rozdziel siatkę - + Splits selected meshes into independent components Rozdziela wybrane siatki na niezależne składniki @@ -1129,7 +1501,7 @@ Arch_Stairs - + Stairs Schody @@ -1137,12 +1509,12 @@ Arch_Structure - + Structure Konstrukcja - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Utwórz obiekt Konstrukcja od początku lub z wybranych obiektów (szkic, szkielet, fasetka lub solid) @@ -1150,25 +1522,38 @@ Arch_Survey - + Survey - Survey + Badanie - + Starts survey - Starts survey + Rozpoczyna badanie + + + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Toggle IFC Brep flag + + + + Force an object to be exported as Brep or not + Force an object to be exported as Brep or not Arch_Wall - + Wall Ściana - + Creates a wall object from scratch or from a selected object (wire, face or solid) Tworzy obiekt Ściana od początku lub z wybranych @@ -1176,12 +1561,12 @@ Arch_Window - + Window Okno - + Creates a window object from a selected object (wire, rectangle or sketch) Tworzy obiekt okno z zaznaczonego obiektu (przewód, prostokąt lub szkic) @@ -1208,16 +1593,6 @@ IFC import importuj IFC - - - Creates groups for each Arch object type - Tworzy grupy dla każdego obiektu typu łuk - - - - Group components by types - Grupa komponentów według typów - 2D rendering @@ -1244,22 +1619,22 @@ Określa, ile razy widoczna grubość linii musi być ustawiona do linii cięcia - + Width: Szerokość: - + Height: Wysokość: - + Color: Kolor: - + Length: Długość: @@ -1306,42 +1681,42 @@ Snapping - Snapping + Przyciąganie Walls drawing - Walls drawing + Rysowanie ścian Auto-join walls - Auto-join walls + Auto łączenie ścian If this is checked, when 2 similar walls are being connected, their underlying sketches will be joined into one, and the two walls will become one - If this is checked, when 2 similar walls are being connected, their underlying sketches will be joined into one, and the two walls will become one + Jeśli to jest zaznaczone, kiedy 2 podobne ściany będą łączone, szkice znajdujące się pod nimi zostaną także połączone w jedno, i ściana stanie się jedną bryłą Join walls base sketches when possible - Join walls base sketches when possible + Łącz ściany rysunku bazowego kiedy możliwe Mesh to Shape Conversion - Mesh to Shape Conversion + Konwersja Siatki do Kształtu If this is checked, conversion is faster but the result might still contain triangulated faces - If this is checked, conversion is faster but the result might still contain triangulated faces + Jeśli to jest zaznaczone wynik konwersji jest szybszy, jednak mogą być widoczne ślady trójkątów Fast conversion - Fast conversion + Szybka konwersja @@ -1351,117 +1726,82 @@ Tolerance value to use when checking if 2 adjacent faces as planar - Tolerance value to use when checking if 2 adjacent faces as planar + Wartość tolerancji do użycia podczas sprawdzania czy 2 przyległe płaszczyzny są płaskie If this is checked, flat groups of faces will be force-flattened, resulting in possible gaps and non-solid results - If this is checked, flat groups of faces will be force-flattened, resulting in possible gaps and non-solid results + Jeśli to zaznaczone, płaskie grupy płaszczyzn będą siłą spłaszczone, skutkując możliwymi szczelinami i obiektami nie bryłowymi Force flat faces - Force flat faces + Wymuś płaskie powierzchnie If this is checked, holes in faces will be performed by subtraction rather than using wires orientation - If this is checked, holes in faces will be performed by subtraction rather than using wires orientation + Jeśli to zaznaczone, otwory w płaszczyznach będą wykonane przez odejmowanie niż przez orientację drutów Cut method - Cut method - - - - Import / export - Import / export + Metoda przycięcia Check this to display debug messages while importing IFC files - Check this to display debug messages while importing IFC files + Zaznacz to żeby wyświetlić wiadomości debugera podczas importu plików IFC Show debug messages - Show debug messages + Pokaż komunikaty debugowania - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed + If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted + Jeśli jest zaznaczone, otwory będą zaimportowane jako substrakcja (odjęcie), w innym przypadku ściany już będą miały otwory odjęte - Force python parser - Force python parser + Separate openings + Oddzielne otwory + + + + If this is checked, object names will be prefixed with the IFC ID number + Jeśli to zaznaczone, nazwa obiektu będzie poprzedzona numerem ID IFC + + + + Prefix names with ID number + Przedrostek nazwy z numerem ID - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - - - - Separate openings - Separate openings - - - - If this is checked, object names will be prefixed with the IFC ID number - If this is checked, object names will be prefixed with the IFC ID number - - - - Prefix names with ID number - Prefix names with ID number - - - Exclude list: - Exclude list: + Lista wykluczeń: - + A comma-separated list of Ifc entities to exclude from import - A comma-separated list of Ifc entities to exclude from import + Rozdzielana przecinkami lista jednostek lfc, aby je wykluczyć z importu - - Custom IFC schema (internal parser only) - Custom IFC schema (internal parser only) - - - + IFC export - IFC export + Eksport IFC - + Scaling factor - Scaling factor - - - - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - - - - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - - - - Save a list of exported objects - Save a list of exported objects + Współczynnik skalowania Snap to baselines of Arch objects (override with CTRL) - Snap to baselines of Arch objects (override with CTRL) + Przyciągaj do lini bazowych obiektów Architektonicznych (nadpisuj z CTRL) @@ -1474,19 +1814,19 @@ Ściany - + mm mm Structures - Structures + Struktury Rebars - Rebars + Pręty zbrojeniowe @@ -1499,97 +1839,105 @@ Przezroczystość: - - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - - - - Separate placements - Separate placements - - - - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - - - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. - Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. + Niektóre przeglądarki IFC nie lubią obiektów eksportowanych jako wyciągnięcia. Użyj tego aby zmusić obiekty aby były eksportowane jako geometria BREP. - - Force export as Breps - Force export as Breps - - - - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - - - - Join multi-solid objects - Join multi-solid objects - - - + Collada export Eksport do Collada - - WebGL export - Eksport do WebGL + + Hidden geomety pattern + Hidden geomety pattern - - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + This is the SVG stroke-dasharray property to apply to projections of hidden objects. - - Discretize wires - Discretize wires + + 30, 10 + 30, 10 + + + + Stairs + Schody + + + + Number of steps: + Number of steps: + + + + Panels + Panels + + + + mm + mm + + + + Thickness + Grubość + + + + IFC / DAE / WebGL + IFC / DAE / WebGL + + + + Force export as Brep + Force export as Brep + + + + Workbench + + + Arch tools + Arch tools + + + + Draft tools + Draft tools + + + + Draft mod tools + Draft mod tools arch - - Arch tools - Narzędzia łuków - - - - Draft tools - Narzędzia rysowania szkicu - - - - Draft mod tools - Narzędzia Moduły szkicu - - - + &Architecture &Architektura - + &Draft Rysunek - + Utilities Narzędzia - + Snapping - Snapping + Przyciąganie diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm b/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm index 1bed7bfe50..c0918a1ce5 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm and b/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts b/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts index 504472c804..d7de942f85 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts @@ -4,407 +4,362 @@ Arch - + Components Componentes - + Components of this object Componentes deste objeto - + Axes Eixos - + Create Axis Criar eixo - + The intervals between axes Os intervalos entre eixos - + The angles of each axis Os ângulos de cada eixo - + The length of the axes O comprimento dos eixos - + The size of the axis bubbles O tamanho das bolhas de eixo - + Remove Remover - + Add Adicionar - + Axis Eixo - + Distance Distância - + Angle Ângulo - - Building - Edificação - - - + Type conversion Tipo de conversão - + Create Building Criar edificação - + Floor Pavimento - + removing sketch support to avoid cross-referencing removendo o suporte do esboço para evitar referências cruzadas - - No objects are cut by the plane - Não há objetos cortados por este plano - - - + is not closed não está fechado - + is not valid não é válido - + doesn't contain any solid não contém nenhum sólido - + contains a non-closed solid contém um sólido aberto - + contains faces that are not part of any solid contém faces que não pertencem a nenhum sólido - + Grouping Agrupando - + Ungrouping Desagrupando - + Split Mesh Dividir malha - + Mesh to Shape Malha para Forma - + All good! no problems found Está tudo bem! nenhum problema foi encontrado - + Base component Componente base - + Additions Adições - + Subtractions Subtrações - + Objects Objetos - + closing Sketch edit fechando a edição do esboço - + The height of this floor A altura deste pavimento - + Roof Telhado - + Create Roof Criar telhado - + Unable to create a roof Não foi possível criar um telhado - - The angle of this roof - O ângulo deste telhado - - - + The face number of the base object used to build this roof O número da face do objeto base usado para construir o telhado - + Page Página - + View of Vista de - + Create Section Plane Criar um plano de corte - + The objects that must be considered by this section plane. Empty means all document Os objetos que devem ser considerados por este plano de corte. Vazio significa: todos os objetos do documento - - The display size of this section plane - O tamanho de exibição deste plano de corte - - - - No shape has been computed yet, select wireframe rendering and render again - Nenhuma forma foi calculada ainda, selecione a renderização aramada e renderize novamente - - - + Skipping invalid object: Ignorando objeto inválido: - - Site - Sítio - - - + Create Site Criar sítio - - Structure - Estrutura - - - + Create Structure Criar estrutura - + The length of this element, if not based on a profile O comprimento deste elemento, se não for baseado em um perfil - + The width of this element, if not based on a profile A largura deste elemento, se não for baseado em um perfil - + The height or extrusion depth of this element. Keep 0 for automatic A profundidade ou altura ou extrusão deste elemento. Mantenha 0 para automático - + Axes systems this structure is built on Sistemas de eixos sobre os quais esta estrutura é construída - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) A direção normal de extrusão deste objeto (mantenha (0,0,0) para normal automática) - + The element numbers to exclude when this structure is based on axes Os números dos elementos a excluir quando essa estrutura for baseada em eixos - - Wall - Parede - - - + Create Wall Criar parede - + WallTrace Linha de base da parede - + Wall options Opções da parede - + Width Largura - + Height Altura - + Alignment Alinhamento - + The width of this wall. Not used if this wall is based on a face A largura desta parede. Não é utilizada se a parede for baseada numa face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid A altura desta parede. Mantenha 0 para automático. Não é utilizada se a parede for baseada em um sólido - + The alignment of this wall on its base object, if applicable O alinhamento desta parede em seu objeto base, se tiver - + Error: Invalid base object Erro: Objeto base inválido - + This mesh is an invalid solid Esta malha não é um sólido válido - - Window - Janela - - - + Create Window Criar uma janela - + the components of this window os componentes desta janela - + Edit Editar - + Create/update component Criar/atualizar um componente - + Base 2D object Objeto base 2D - + Wires Arames - + Create new component Criar um novo componente - + Name Nome - + Type Tipo - + Thickness Espessura - + Z offset Deslocamento em Z @@ -419,71 +374,66 @@ O arquivo %s foi criado com sucesso. - + Error: Couldn't determine character encoding Erro: Não foi possível determinar a codificação de caracteres - + Couldn't locate IfcOpenShell Não foi possível localizar IfcOpenShell - + IFC Schema not found, IFC import disabled. Esquema de IFC não encontrado, a importação IFC será desativada. - + successfully written gravado com sucesso - + The numbering style O estilo de numeração - + removing sketch external references to avoid cross-referencing removendo as referências externas do esboço para evitar referências cruzadas - - Invalid cutplane - Plano de corte inválido - - - + Add space boundary Adicionar um limite de espaço - + Remove space boundary Remover um limite de espaço - + Please select a base object Por favor, selecione um objeto de base - + Fixtures Acessórios - + Armatures Ferragens - + The placement of this group O localizador deste grupo @@ -493,171 +443,146 @@ Armação - + Create Frame Criar uma armação - - Rebar - Ferragen - - - + Create Rebar Criar ferragens - + Please select a base face on a structural object Por favor, selecione uma face de base em um objeto estrutural - + Please select a base object Por favor, selecione um objeto de base - - Section - Seção - - - + The placement of this object O localizador deste objeto - + The terrain of this site O terreno deste sítio - + The address of this site O endereço deste sítio - + The geographic coordinates of this site As coordenadas geográficas deste sítio - + An url that shows this site in a mapping website Um url que mostra este sítio em um website de mapeamento - - Space - Espaço - - - + Create Space Criar Espaço - - A base shape defining this space - Uma forma base definindo este espaço - - - + The objects that make the boundaries of this space object Os objetos que constituem os limites deste espaço - - Stairs - Escada - - - + Create Stairs Criar Escada - + The length of these stairs, if no baseline is defined O comprimento desta escada, se não tiver nenhuma linha de base - + The width of these stairs A largura desta escada - + The total height of these stairs A altura total desta escada - + The alignment of these stairs on their baseline, if applicable O alinhamento desta escada em sua linha de base, se tiver - + The number of risers in these stairs O número de espelhos nesta escada - + The depth of the treads of these stairs A profundidade dos degraus desta escada - + The height of the risers of these stairs A altura dos espelhos desta escada - + The size of the nosing O tamanho do bocel - + The thickness of the treads A espessura do degrau - + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in O cálculo da fórmula de Blondel, deve estar entre 62 e 64cm ou 24,5 e 25,5 in - + The type of landings of these stairs O tipo de patamar desta escada - + The type of winders in these stairs O tipo de desenvolvimento dos degraus desta escada - + The type of structure of these stairs O tipo de estrutura desta escada - + The thickness of the massive structure or of the stringers A espessura da estrutura maciça ou das longarinas - + The width of the stringers A largura das longarinas - + The offset between the border of the stairs and the structure O espaço entre a borda da escada e a estrutura @@ -672,139 +597,124 @@ Aço - + Structure options Opções da estrutura - + Preset Predefinição - + Length Comprimento - + Rotate Rotacionar - + Con&tinue Con&tinuar - + An optional extrusion path for this element Um caminho de extrusão opcional para este elemento - + Armatures contained in this element Armações contidas neste elemento - - The role of this structural element - O papel deste elemento estrutural - - - + The structural nodes of this element Os nós estruturais deste elemento - + Error: The base shape couldn't be extruded along this tool object Erro: A forma de base não pode ser extrudada ao longo deste objeto - + Couldn't compute a shape Não foi possível calcular uma forma - + Merge Wall Mesclar uma parede - + The selected wall contain no subwall to merge A parede selecionada não contém nenhum subparede para mesclar - + Please select only wall objects Por favor, selecione apenas objetos de parede - + Merge Walls Mesclar paredes - + The length of this wall. Not used if this wall is based on an underlying object O comprimento desta parede. Não é usado se esta parede for baseada em um objeto subjacente - + The face number of the base object used to build this wall O número da face do objeto de base a ser usada para construir o telhado - + The offset between this wall and its baseline (only for left and right alignments) A distância entre a parede e sua linha de base (somente para alinhamentos esquerdo e direito) - + Pick a face on an existing object or select a preset Selecione uma face em um objeto existente ou escolha uma predefinição - + Window options Opções da janela - + The depth of the hole that this window makes in its host object. Keep 0 for automatic. A profundidade do furo que esta janela faz em seu objeto anfitrião. Mantenha 0 para automático. - - an optional volume to be subtracted from hosts of this window - um volume opcional a ser subtraído dos anfitriões desta janela - - - + The width of this window (for preset windows only) A largura desta janela (somente para janelas predefinidas) - + The height of this window (for preset windows only) A altura desta janela (somente para janelas predefinidas) - + The normal direction of this window A direção normal desta janela - - The role of this window - O papel desta janela - - - + Unable to create component Não foi possível criar um componente @@ -818,46 +728,36 @@ - + IfcOpenShell not found or disabled, falling back on internal parser. IfcOpenShell não foi encontrado ou está desativado, o motor interno será usado. - + Distances (mm) and angles (deg) between axes Distâncias (mm) e ângulos (graus) entre eixos - + Error computing the shape of this object Não foi possível computar a forma do objeto - - StructuralSystem - Sistema Estrutural - - - + Create Structural System Criar sistema estrutural - - The role of this wall - O papel desta parede - - - + Error: IfcOpenShell is not installed Erro: IfcOpenShell não está instalado - + Error: your IfcOpenShell version is too old Erro: a sua versão de IfcOpenShell é muito antiga @@ -870,16 +770,455 @@ Uma forma contendo curvas foi encontrada. Triangulação. + + + Invalid cutplane + + Plano de corte inválido + + + + + No objects are cut by the plane + + Não há objetos cortados por este plano + + + + + Object doesn't have settable IFC Attributes + Este objeto não possuí atributos IFC configuráveis + + + + Disabling Brep force flag of object + Desativando o modo Brep deste objeto + + + + Enabling Brep force flag of object + Ativando o modo Brep deste objeto + + + + The base object this component is built upon + O objeto de base em cima de qual este componente é construído + + + + Other shapes that are appended to this object + Outras formas que são acrescentadas a este objeto + + + + Other shapes that are subtracted from this object + Outras formas que são subtraídas deste objeto + + + + An optional description for this component + Uma descrição opcional para este componente + + + + An optional tag for this component + Uma tag opcional para este componente + + + + Custom IFC properties and attributes + Atributos e propriedades IFC personalizados + + + + A material for this object + Um material para este objeto + + + + The role of this object + O papel deste objeto + + + + Specifies if this object must move together when its host is moved + Especifica se este objeto deve mover junto quando seu parente for movido + + + + has no solid + não tem sólido + + + + has an invalid shape + tem uma forma inválida + + + + has a null shape + tem uma forma nula + + + + Cutting + Corte + + + + You must select a base object first! + Você deve selecionar um objeto de base primeiro! + + + + Create Equipment + Criar equipamento + + + + You must select exactly one base object + Você deve selecionar exatamente um objeto de base + + + + The selected object must be a mesh + O objeto selecionado deve ser uma malha + + + + This mesh has more than 1000 facets. + Essa malha tem mais de 1000 facetas. + + + + This operation can take a long time. Proceed? + Esta operação pode levar muito tempo. Continuar? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + A malha tem mais de 500 facetas. Isso levará alguns minutos... + + + + Create 3 views + Criar 3 vistas + + + + an optional 2D shape representing a top view of this equipment + uma forma 2D opcional que representa uma vista de cima deste equipamento + + + + an optional 2D shape representing a front view of this equipment + uma forma 2D opcional que representa uma vista frontal deste equipamento + + + + an optional 2D shape representing a side view of this equipment + uma forma 2D opcional que representa uma vista lateral deste equipamento + + + + The model description of this equipment + A descrição do modelo deste equipamento + + + + The url of the product page of this equipment + A url da página do produto deste equipamento + + + + Create Panel + Criar painel + + + + Panel options + Opções do painel + + + + The thickness or extrusion depth of this element + A espessura ou profundidade de extrusão deste elemento + + + + The number of sheets to use + O número de folhas a serem usadas + + + + The offset between this panel and its baseline + O deslocamento entre este painel e sua linha de base + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Parâmetros dos perfis do telhado: +* Ângulo: inclinação em graus em relação à horizontal. +* Comprimento: distância entre a parede e o invólucro do cume. +* Espessura: espessura do painel do telhado. +* Saliência: distância entre a parede e a borda inferior. +* Altura: altura do cume (calculado automaticamente) +* IdRel: Id relativo para cálculos automáticos. +--- +Se ângulo = 0 e comprimento = 0, então o perfil é idêntico ao perfil relativo. +Se ângulo = 0, então o ângulo é calculado para que a altura seja a mesma que do perfil relativo. +Se comprimento = 0, então o comprimento é calculado para que a altura seja a mesma que do perfil relativo. + + + + Id + Id + + + + IdRel + IdRel + + + + If false, non-solids will be cut too, with possible wrong results. + Se falso, não-sólidos serão cortados também, com possíveis erros. + + + + The display length of this section plane + O comprimento da representação 3D deste plano de corte + + + + The display height of this section plane + A largura da representação 3D deste plano de corte + + + + The size of the arrows of this section plane + O tamanho das setas deste plano de corte + + + + The computed floor area of this space + A área de piso computada deste espaço + + + + The finishing of the floor of this space + O acabamento do piso deste espaço + + + + The finishing of the walls of this space + O acabamento das paredes deste espaço + + + + The finishing of the ceiling of this space + O acabamento do teto deste espaço + + + + Objects that are included inside this space, such as furniture + Objetos que são incluídos dentro deste espaço, por exemplo o mobiliário + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + O texto a ser exibido. Use $area, $label, $tag, $floor, $walls, $ceiling para inserir os respectivos dados + + + + The name of the font + O nome da fonte + + + + The color of the area text + A cor do texto da área + + + + The size of the text font + O tamanho da fonte do texto + + + + The size of the first line of text + O tamanho da primeira linha do texto + + + + The space between the lines of text + O espaço entre as linhas de texto + + + + The position of the text. Leave (0,0,0) for automatic position + A posição do texto. Deixe (0, 0,0) para posição automática + + + + The justification of the text + A justificação do texto + + + + The number of decimals to use for calculated texts + O número de casas decimais a serem usadas para textos calculados + + + + Show the unit suffix + Mostrar o sufixo de unidade + + + + A description of the standard profile this element is based upon + Uma descrição do perfil padrão no qual este elemento é baseado + + + + Sill height + Altura de peitoril + + + + CutVolume + Volume de corte + + + + CutPlane + Plano de corte + + + + PreviewCutVolume + Prévia do volume de corte + + + + Cut Plane + Plano de corte + + + + Cut Plane options + Opções do plano de corte + + + + Wich side to cut + Lado a ser cortado + + + + Behind + Traseiro + + + + Front + Frontal + + + + Crossing point not found in profile. + + Ponto de referência não encontrado no perfil. + + + + + A list of angles for each roof pane + Uma lista de ângulos para cada água do telhado + + + + A list of horizontal length projections for each roof pane + Uma lista de comprimentos em projeção horizontal para cada água do telhado + + + + A list of IDs of relative profiles for each roof pane + Uma lista de IDs de perfis relativos para cada água do telhado + + + + A list of thicknesses for each roof pane + Uma lista de espessuras para cada água do telhado + + + + A list of overhangs for each roof pane + Uma lista de saliências para cada água do telhado + + + + A list of calculated heights for each roof pane + Uma lista de alturas calculadas para cada água do telhado + + + + Angle (deg) + Ângulo (graus) + + + + Run (mm) + Comprimento (mm) + + + + Thickness (mm) + Espessura (mm) + + + + Overhang (mm) + Saliência (mm) + + + + Height (mm) + Altura (mm) + + + + Arch_3Views + + + 3 views from mesh + 3 vistas da malha + + + + Creates 3 views (top, front, side) from a mesh-based object + Cria 3 vistas (superior, frontal, lateral) de um objeto malha + Arch_Add - + Add component Adicionar componentes - + Adds the selected components to the active object Adiciona os componentes selecionados ao objeto ativo @@ -887,12 +1226,12 @@ Arch_Axis - + Axis Eixo - + Creates an axis system. Cria um sistema de eixo. @@ -900,12 +1239,12 @@ Arch_Building - + Building Edificação - + Creates a building object including selected objects. Cria uma edificação incluindo os objetos selecionados. @@ -913,17 +1252,17 @@ Arch_Check - + Check Verificar - + Checks the selected objects for problems Verifica problemas nos objetos selecionados - + Explore the contents of an Ifc file Explora o conteúdo de um arquivo Ifc @@ -931,18 +1270,41 @@ Arch_CloseHoles - + Close holes Fechar furos - + Closes holes in open shapes, turning them solids Fecha furos em formas abertas, transformando-as em sólidos - Arch_Fixture + Arch_CutPlane + + + Cut with plane + Corte com um plano + + + + Cut an object with a plane + Cortar um objeto com um plano + + + + Arch_Equipment + + + Equipment + Equipamento + + + + Creates an equipment object from a selected object (Part or Mesh) + Cria um equipamento a partir de um objeto selecionado (parte ou malha) + Arch_Floor @@ -960,12 +1322,12 @@ Arch_Frame - + Frame Armação - + Creates a frame object from a planar 2D object and a profile Cria um objeto de armação a partir de um objeto 2D plano e um perfil @@ -973,7 +1335,7 @@ Arch_IfcExplorer - + Ifc Explorer Explorador Ifc @@ -981,12 +1343,12 @@ Arch_MergeWalls - + Merge Walls Mesclar paredes - + Merges the selected walls, if possible Mescla as paredes selecionadas, se possível @@ -994,25 +1356,38 @@ Arch_MeshToShape - + Mesh to Shape Malha para Forma - + Turns selected meshes into Part Shape objects Transforma as malhas selecionadas em formas + + Arch_Panel + + + Panel + Painel + + + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Cria um painel a partir de zero ou de um objeto selecionado (esboço, arame, face ou sólido) + + Arch_Rebar - + Rebar Ferragen - + Creates a Reinforcement bar from the selected face of a structural object Cria uma barra de reforço a partir de uma face selecionada de um objeto estrutural @@ -1020,12 +1395,12 @@ Arch_Remove - + Remove component Remover componentes - + Remove the selected components from their parents, or create a hole in a component Remove os componentes selecionados de seus objetos-pai, ou cria um buraco em um componente @@ -1033,12 +1408,12 @@ Arch_RemoveShape - + Remove Shape from Arch Remover forma - + Removes cubic shapes from Arch components Remove formas cúbicas de objetos arquitetônicos @@ -1046,25 +1421,25 @@ Arch_Roof - + Roof Telhado - - Creates a roof object from the selected face of an object - Cria um objeto telhado a partir de uma face de um objeto + + Creates a roof object from the selected wire. + Cria um telhado a partir de um arame selecionado. Arch_SectionPlane - + Section Plane Plano de corte - + Creates a section plane object, including the selected objects Cria um plano de corte, incluindo os objetos selecionados @@ -1072,12 +1447,12 @@ Arch_SelectNonSolidMeshes - + Select non-manifold meshes Selecionar malhas não sólidas - + Selects all non-manifold meshes from the document or from the selected groups Seleciona todas as malhas não sólidas do documento ou dos grupos selecionados @@ -1085,12 +1460,12 @@ Arch_Site - + Site Sítio - + Creates a site object including selected objects. Cria um sítio incluindo os objetos selecionados. @@ -1098,17 +1473,17 @@ Arch_Space - + Space Espaço - + Creates a space object from selected boundary objects Cria um espaço usando os objetos selecionados como limites - + Creates a stairs object Cria uma escada @@ -1116,12 +1491,12 @@ Arch_SplitMesh - + Split Mesh Dividir malha - + Splits selected meshes into independent components Divide as malhas selecionadas em componentes independentes @@ -1129,7 +1504,7 @@ Arch_Stairs - + Stairs Escada @@ -1137,12 +1512,12 @@ Arch_Structure - + Structure Estrutura - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Cria um objeto estrutural a partir do zero ou de um objeto selecionado (esboço, arame, face ou sólido) @@ -1150,25 +1525,38 @@ Arch_Survey - + Survey Quantitativo - + Starts survey Inicia o modo quantitativo + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Troca modo Brep + + + + Force an object to be exported as Brep or not + Força ou não um objeto a ser exportado como Brep no formato IFC + + Arch_Wall - + Wall Parede - + Creates a wall object from scratch or from a selected object (wire, face or solid) Cria uma parede a partir do zero ou de um objeto selecionado (arame, face ou sólido) @@ -1176,12 +1564,12 @@ Arch_Window - + Window Janela - + Creates a window object from a selected object (wire, rectangle or sketch) Cria uma janela a partir de um objeto selecionado (arame, retângulo ou esboço) @@ -1208,16 +1596,6 @@ IFC import Importação IFC - - - Creates groups for each Arch object type - Cria grupos para cada tipo de objeto arquitetônico - - - - Group components by types - Agrupar componentes por tipo - 2D rendering @@ -1244,22 +1622,22 @@ Especifica quantas vezes a espessura da linha vista deve ser aplicada em linhas de corte - + Width: Largura: - + Height: Altura: - + Color: Cor: - + Length: Comprimento: @@ -1373,11 +1751,6 @@ Cut method Método de corte - - - Import / export - Importar / Exportar - Check this to display debug messages while importing IFC files @@ -1390,74 +1763,44 @@ - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - Se essa opção estiver marcada, arquivos IFC serão sempre importados com o motor interno, mesmo se o IfcOpenShell está instalado - - - - Force python parser - Forçar motor interno - - - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted Se essa opção estiver marcada, as aberturas serão importadas como subtrações, senão as formas das parede já virão com suas aberturas subtraídas - + Separate openings Separar aberturas - + If this is checked, object names will be prefixed with the IFC ID number Se essa opção estiver marcada, nomes de objetos terão um prefixo com o número ID do arquivo IFC - + Prefix names with ID number Adicionar prefixo com número ID - + Exclude list: Lista de exclusão: - + A comma-separated list of Ifc entities to exclude from import Uma lista separada por vírgulas de entidades Ifc para serem excluídas da importação - - Custom IFC schema (internal parser only) - Esquema IFC personalizado (somente para motor interno) - - - + IFC export Exportação IFC - + Scaling factor Fator de escala - - - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - Arquivos IFC são normalmente escritos em milímetros. Se você estiver trabalhando com unidades diferentes, isto permite que você escale todas as suas unidades para ser expressas em milímetros. - - - - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - Se esta opção estiver marcada, um arquivo de texto será exportado juntamente com o arquivo ifc, que contém a lista de objetos exportados, para fins de verificação. - - - - Save a list of exported objects - Salvar uma lista dos objetos exportados - Snap to baselines of Arch objects (override with CTRL) @@ -1474,7 +1817,7 @@ Paredes - + mm mm @@ -1499,95 +1842,103 @@ Transparência: - - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - Se essa opção for marcada, localizadores serão recalculados e aplicados aos objetos, como eles estavam no arquivo IFC (mais lento) - - - - Separate placements - Separar localizadores - - - - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - - - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Alguns aplicativos IFC não gostam de objetos exportados como extrusões. Use isso para forçar todos os objetos a serem exportados como geometria BREP. - - Force export as Breps - Forçar exportação como Breps - - - - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - <html><head/> <body><p>Objetos contendo múltiplos sólidos são normalmente exportados como várias representações. Porém, alguns aplicativos não gostam disso. Você pode usar esta opção para unir esses sólidos em um só.</p></body></html> - - - - Join multi-solid objects - Unir objetos multi-sólidos - - - + Collada export Exportação para Collada - - WebGL export - Exportação para WebGL + + Hidden geomety pattern + Padrão para linhas escondidas - - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. - Se esta opção for marcada, arames vão ser segmentados, o que resulta em curvas mais precisas, mas arquivos mais pesados. + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + Esta é a propriedade SVG stroke-dasharray a ser aplicada a projeções de objetos escondidos. - - Discretize wires - Segmentar arames + + 30, 10 + 30, 10 + + + + Stairs + Escada + + + + Number of steps: + Número de degraus: + + + + Panels + Painéis + + + + mm + mm + + + + Thickness + Espessura + + + + IFC / DAE / WebGL + IFC / DAE / WebGL + + + + Force export as Brep + Forçar exportação como Brep + + + + Workbench + + + Arch tools + Ferramentas de arquitetura + + + + Draft tools + Ferramentas de traço + + + + Draft mod tools + Ferramentas de modificação arch - - Arch tools - Ferramentas de arquitetura - - - - Draft tools - Ferramentas de traço - - - - Draft mod tools - Ferramentas de modificação - - - + &Architecture & Arquitetura - + &Draft &Traço - + Utilities Utilitários - + Snapping Snap diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm b/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm index ded45298fa..e6e7a7c2e3 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm and b/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts b/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts index e6075b3e3f..87c47bf1a2 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts @@ -4,407 +4,362 @@ Arch - + Components Components - + Components of this object Componentes deste objeto - + Axes Eixos - + Create Axis Criar Eixo - + The intervals between axes Os intervalos entre os eixos - + The angles of each axis Os ângulos de cada eixo - + The length of the axes O comprimento dos eixos - + The size of the axis bubbles O tamanho das bolhas de eixo - + Remove Remover - + Add Adicionar - + Axis Eixo - + Distance Distância - + Angle Ângulo - - Building - Edifício - - - + Type conversion Tipo de Conversão - + Create Building Criar Edifício - + Floor Piso - + removing sketch support to avoid cross-referencing a remover o suporte de esboço para evitar cruzamento de referências - - No objects are cut by the plane - Não há objetos cortados pelo plano - - - + is not closed não está fechada - + is not valid não é válido - + doesn't contain any solid não contém qualquer sólido - + contains a non-closed solid contém um sólido não fechado - + contains faces that are not part of any solid contém as faces que não são parte de qualquer sólido - + Grouping Agrupar - + Ungrouping Desagrupar - + Split Mesh Dividir Malha - + Mesh to Shape - Mesh to Shape + Malha para Forma - + All good! no problems found Está tudo bem! Não foram encontrados problemas - + Base component Componente da base - + Additions Adições - + Subtractions Subtrações - + Objects Objetos - + closing Sketch edit - a fechar editor de Esboço + Fechar editor de Esboço - + The height of this floor A altura deste piso - + Roof Telhado - + Create Roof Criar Telhado - + Unable to create a roof Não é possível criar um telhado - - The angle of this roof - O ângulo deste telhado - - - + The face number of the base object used to build this roof O número da face do objeto de base usado para construir este telhado - + Page Página - + View of - Visualização de + Vista de - + Create Section Plane - Criar Plano de Secção + Criar Plano de Corte - + The objects that must be considered by this section plane. Empty means all document - Os objetos que devem ser considerados por este plano de secção. Se vazio, significa todo o documento + Os objetos que devem ser considerados por este plano de corte. Se vazio, significa todo o documento - - The display size of this section plane - O tamanho da visualização deste plano de secção - - - - No shape has been computed yet, select wireframe rendering and render again - Ainda não foi calculada nenhuma forma, selecione a renderização "wireframe" e efetue novamente a renderização - - - + Skipping invalid object: Ignorar objeto inválido: - - Site - Site - - - + Create Site - Criar Site + Criar Sítio - - Structure - Estrutura - - - + Create Structure Criar Estrutura - + The length of this element, if not based on a profile O comprimento deste elemento, se não for baseado no perfil - + The width of this element, if not based on a profile A largura deste elemento, se não for baseado no perfil - + The height or extrusion depth of this element. Keep 0 for automatic A altura ou a profundidade da extrusão deste elemento. Manter 0 para automático - + Axes systems this structure is built on Sistemas de eixos, em que esta estrutura é construída - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) A direção de extrusão normal deste objeto (manter (0, 0,0) para o automático normal) - + The element numbers to exclude when this structure is based on axes Os números de elemento para excluir quando esta estrutura for baseada nos eixos - - Wall - Parede - - - + Create Wall Criar Parede - + WallTrace Traço da Parede - + Wall options Opções da Parede - + Width Largura - + Height Altura - + Alignment Alinhamento - + The width of this wall. Not used if this wall is based on a face - A largura desta parede. Não é usada, se esta parede for baseada numa face + Largura da parede. Não é usada, se esta parede for baseada numa face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - A altura desta parede. Manter 0 para automático. Não usada, se esta parede for baseada num sólido + Altura desta parede. Manter 0 para automático. Não usada, se esta parede for baseada num sólido - + The alignment of this wall on its base object, if applicable - O alinhamento desta parede na base do seu objeto, se aplicável + Alinhamento desta parede na base do seu objeto, se aplicável - + Error: Invalid base object Erro: Objeto de base inválido - + This mesh is an invalid solid Esta malha é um sólido inválido - - Window - Janela - - - + Create Window Criar Janela - + the components of this window - os componentes desta janela + Componentes desta janela - + Edit Editar - + Create/update component Criar/atualizar componente - + Base 2D object - Objeto de Base 2D + Objeto 2D de Base - + Wires - Fios + Aramado - + Create new component Criar novo componente - + Name Nome - + Type Tipo - + Thickness Espessura - + Z offset Offset em Z @@ -419,73 +374,68 @@ arquivo %s criado com exito. - + Error: Couldn't determine character encoding Erro: Não foi possivel determinar a codificação de caracteres - + Couldn't locate IfcOpenShell Não foi possível localizar IfcOpenShell - + IFC Schema not found, IFC import disabled. Não foi encontrado o IFC Schema, importar IFC desativado. - + successfully written gravado com sucesso - + The numbering style O estilo de numeração - + removing sketch external references to avoid cross-referencing removendo referências externas do sketch para evitar referências cruzadas - - Invalid cutplane - Plano de corte inválido - - - + Add space boundary Adicionar limite de espaço - + Remove space boundary Remover limite de espaço - + Please select a base object Por favor, selecione um objeto base - + Fixtures - Acessórios + instalações - + Armatures Armaduras - + The placement of this group A posição deste grupo @@ -495,171 +445,146 @@ Frame - + Create Frame Criar moldura - - Rebar - Rebar - - - + Create Rebar - Create Rebar + Criar armadura - + Please select a base face on a structural object Por favor selecione uma face base num objeto estrutural - + Please select a base object Por favor, selecione um objeto base - - Section - Secção - - - + The placement of this object A localização deste objeto - + The terrain of this site O terreno deste projeto - + The address of this site O endereço do projeto - + The geographic coordinates of this site As coordenadas geográficas deste projeto - + An url that shows this site in a mapping website - An url that shows this site in a mapping website + Um url que mostra este local em um site de mapeamento - - Space - Espaço - - - + Create Space Criar espaço - - A base shape defining this space - Uma forma base que defina este espaço - - - + The objects that make the boundaries of this space object Os objetos que definem os limites deste espaço - - Stairs - Escadas - - - + Create Stairs Criar escadas - + The length of these stairs, if no baseline is defined O comprimento da escada, se não houver linha base definida - + The width of these stairs Largura da escada - + The total height of these stairs Altura total da escada - + The alignment of these stairs on their baseline, if applicable O alinhamento das escadas na linha base, se aplicável - + The number of risers in these stairs Número de espelhos (degraus) da escada - + The depth of the treads of these stairs A profundidade do cobertor (degrau) da escada - + The height of the risers of these stairs Altura dos espelhos (degraus) da escada - + The size of the nosing Dimensão do focinho do degrau - + The thickness of the treads Espessura do cobertor - + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in A relação de Blondel, deve estar entre 62 e 64cm ou 24,5 e 25,5 in - + The type of landings of these stairs Tipo de patamar da escada - + The type of winders in these stairs Tipo de desenvolvimento dos degraus da escada - + The type of structure of these stairs Tipo de estrutura da escada - + The thickness of the massive structure or of the stringers Espessura da estrutura maciça ou das longarinas - + The width of the stringers Largura das longarinas - + The offset between the border of the stairs and the structure O afastamento entre a borda da escada e a estrutura @@ -674,139 +599,124 @@ Aço - + Structure options Opções da estrutura - + Preset Predefinição - + Length Comprimento - + Rotate Rodar - + Con&tinue Con&tinuar - + An optional extrusion path for this element Um caminho opcional de extrusão para este elemento - + Armatures contained in this element Armaduras contidas neste elemento - - The role of this structural element - Função deste elemento estrutural - - - + The structural nodes of this element Nós estruturais deste elemento - + Error: The base shape couldn't be extruded along this tool object Erro: A forma base não pode ser extrudida ao longo deste objeto - + Couldn't compute a shape Não foi possível calcular uma forma - + Merge Wall Unir parede - + The selected wall contain no subwall to merge A parede selecionada não contém nenhuma subparede para unir - + Please select only wall objects Por favor, selecione apenas paredes - + Merge Walls Unir paredes - + The length of this wall. Not used if this wall is based on an underlying object Comprimento da parede. Não é usado se a parede for baseada num objeto subjacente - + The face number of the base object used to build this wall O número da face do objeto de base usado para construir este telhado - + The offset between this wall and its baseline (only for left and right alignments) Distância entre a parede e sua linha base (apenas para alinhamentos esquerdo e direito) - + Pick a face on an existing object or select a preset Selecione uma face num objeto existente ou escolha uma predefinição - + Window options Opções da janela - + The depth of the hole that this window makes in its host object. Keep 0 for automatic. A profundidade da abertura que esta janela faz no seu objeto anfitrião. Mantenha 0 para automático. - - an optional volume to be subtracted from hosts of this window - um volume opcional a ser subtraído dos anfitriões desta janela - - - + The width of this window (for preset windows only) A largura desta janela (somente para janelas predefinidas) - + The height of this window (for preset windows only) A altura desta janela (somente para janelas predefinidas) - + The normal direction of this window A direção normal desta janela - - The role of this window - Função desta janela - - - + Unable to create component Não é possível criar componente @@ -819,46 +729,36 @@ - + IfcOpenShell not found or disabled, falling back on internal parser. IfcOpenShell não foi encontrado ou está desativado, o motor interno será usado. - + Distances (mm) and angles (deg) between axes Distâncias entre eixos em (mm) e ângulos em (graus) - + Error computing the shape of this object Não foi possível computar a forma do objeto - - StructuralSystem - Sistema Estrutural - - - + Create Structural System Criar sistema estrutural - - The role of this wall - Função desta parede - - - + Error: IfcOpenShell is not installed Erro: IfcOpenShell não está instalado - + Error: your IfcOpenShell version is too old Erro: a sua versão de IfcOpenShell é muito antiga @@ -871,16 +771,445 @@ Uma forma contendo curvas foi encontrada. Triangulação + + + Invalid cutplane + + Plano de corte inválido + + + + + No objects are cut by the plane + + Não há objetos cortados pelo plano + + + + + Object doesn't have settable IFC Attributes + Este objeto não possuí atributos IFC configuráveis + + + + Disabling Brep force flag of object + Desativar o modo Brep deste objeto + + + + Enabling Brep force flag of object + Ativar o modo Brep deste objeto + + + + The base object this component is built upon + O objeto de base, sobre o qual este componente é construído + + + + Other shapes that are appended to this object + Outras formas que são acrescentadas a este objeto + + + + Other shapes that are subtracted from this object + Outras formas que são subtraídas do objeto + + + + An optional description for this component + Uma descrição opcional para este componente + + + + An optional tag for this component + Uma etiqueta opcional para este componente + + + + Custom IFC properties and attributes + Atributos e propriedades IFC personalizados + + + + A material for this object + Um material para este objeto + + + + The role of this object + O papel deste objeto + + + + Specifies if this object must move together when its host is moved + Especifica se este objeto deve mover-se junto quando o seu hospedeiro é movido + + + + has no solid + Não tem nenhum sólido + + + + has an invalid shape + tem uma forma inválida + + + + has a null shape + tem uma forma nula + + + + Cutting + Corte + + + + You must select a base object first! + Deve selecionar um objeto base primeiro! + + + + Create Equipment + Criar equipamento + + + + You must select exactly one base object + Deve selecionar exatamente um objeto de base + + + + The selected object must be a mesh + O objeto selecionado deve ser uma malha (mesh) + + + + This mesh has more than 1000 facets. + Essa malha (mesh) tem mais de 1000 faces. + + + + This operation can take a long time. Proceed? + Esta operação pode demorar muito. Continuar? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + A malha (mesh) tem mais de 500 faces. Isto levará alguns minutos... + + + + Create 3 views + Criar 3 vistas + + + + an optional 2D shape representing a top view of this equipment + uma forma 2D opcional que represente uma vista de cima do equipamento + + + + an optional 2D shape representing a front view of this equipment + uma forma 2D opcional que representa uma vista frontal do equipamento + + + + an optional 2D shape representing a side view of this equipment + uma forma 2D opcional que representa uma vista lateral do equipamento + + + + The model description of this equipment + A descrição do modelo do equipamento + + + + The url of the product page of this equipment + A url da página do produto deste equipamento + + + + Create Panel + Criar painel + + + + Panel options + Opções do painel + + + + The thickness or extrusion depth of this element + A espessura ou profundidade de extrusão deste elemento + + + + The number of sheets to use + Número de folhas a usar + + + + The offset between this panel and its baseline + O desvio entre este painel e sua linha de base + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Parâmetros dos perfis do telhado: * Ângulo: inclinação em graus em relação à horizontal. * comprimento: distância entre a parede e o cume. * Espessura: espessura da água do telhado. Projeção do beirado: distancia entre a parede e o limite do beirado. * Altura: altura do cume (calculado automaticamente) * IdRel: Id relativo para cálculos automáticos. ---Se ângulo = 0 e comprimento = 0, então seu perfil é idêntico ao perfil relativo. Se ângulo = 0, então o ângulo é calculado para que a altura seja a mesma que o perfil relativo. Se comprimento = 0 então o comprimento é calculado para que a altura seja a mesma que o perfil relativo. + + + + Id + Id + + + + IdRel + IdRel + + + + If false, non-solids will be cut too, with possible wrong results. + Se falso, não-sólidos serão também cortados, com possíveis resultados errados. + + + + The display length of this section plane + Comprimento da representação 3D deste plano de corte + + + + The display height of this section plane + Altura da representação 3D deste plano de corte + + + + The size of the arrows of this section plane + Tamanho das setas deste plano de corte + + + + The computed floor area of this space + Área de piso calculada para este espaço + + + + The finishing of the floor of this space + Acabamento do pavimento deste espaço + + + + The finishing of the walls of this space + Acabamento das paredes deste espaço + + + + The finishing of the ceiling of this space + Acabamento do teto deste espaço + + + + Objects that are included inside this space, such as furniture + Objetos que são incluídos dentro deste espaço, por exemplo o mobiliário + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + Texto a ser exibido. Usar $area, $label, $tag, $floor, $walls, $ceiling para inserir os respectivos dados + + + + The name of the font + Nome da fonte + + + + The color of the area text + Cor do texto da área + + + + The size of the text font + O tamanho da fonte do texto + + + + The size of the first line of text + Tamanho da primeira linha do texto + + + + The space between the lines of text + Espaço entre as linhas de texto + + + + The position of the text. Leave (0,0,0) for automatic position + Posição do texto. Deixe (0, 0,0) para posição automática + + + + The justification of the text + Alinhamento do texto + + + + The number of decimals to use for calculated texts + O número de casas decimais a usar nos textos calculados + + + + Show the unit suffix + Mostrar o sufixo de unidade + + + + A description of the standard profile this element is based upon + Descrição do perfil padrão no qual este elemento se baseia + + + + Sill height + Altura de peitoril + + + + CutVolume + CutVolume + + + + CutPlane + Plano de corte + + + + PreviewCutVolume + PreviewCutVolume + + + + Cut Plane + Plano de corte + + + + Cut Plane options + Opções do Plano de Corte + + + + Wich side to cut + Lado a cortar + + + + Behind + Behind + + + + Front + Frente + + + + Crossing point not found in profile. + + Crossing point not found in profile. + + + + + A list of angles for each roof pane + Lista de ângulos para cada água do telhado + + + + A list of horizontal length projections for each roof pane + Lista de comprimentos em projeção horizontal para cada água do telhado + + + + A list of IDs of relative profiles for each roof pane + Lista de IDs de perfis relativos para cada água do telhado + + + + A list of thicknesses for each roof pane + Lista de espessuras para cada água do telhado + + + + A list of overhangs for each roof pane + Lista de projeções do beirado para cada água do telhado + + + + A list of calculated heights for each roof pane + Lista de alturas calculadas para cada água do telhado + + + + Angle (deg) + Ângulo (graus) + + + + Run (mm) + Run (mm) + + + + Thickness (mm) + Espessura (mm) + + + + Overhang (mm) + Projeção do beirado (mm) + + + + Height (mm) + Altura (mm) + + + + Arch_3Views + + + 3 views from mesh + 3 vistas da malha (mesh) + + + + Creates 3 views (top, front, side) from a mesh-based object + Cria 3 vistas (superior, frontal, lateral) de um objeto malha (mesh) + Arch_Add - + Add component Adicionar componente - + Adds the selected components to the active object Adiciona os componentes selecionados ao objeto ativo @@ -888,12 +1217,12 @@ Arch_Axis - + Axis Eixo - + Creates an axis system. Cria um sistema de eixo. @@ -901,12 +1230,12 @@ Arch_Building - + Building Edifício - + Creates a building object including selected objects. Cria um objeto de edifício, incluindo os objetos selecionados. @@ -914,17 +1243,17 @@ Arch_Check - + Check Verificar - + Checks the selected objects for problems Verifica os objetos selecionados para ver se existem problemas - + Explore the contents of an Ifc file Explorar o conteúdo de um arquivo Ifc @@ -932,18 +1261,41 @@ Arch_CloseHoles - + Close holes Fechar buracos - + Closes holes in open shapes, turning them solids Fecha buracos em formas abertas, transformando-os em sólidos - Arch_Fixture + Arch_CutPlane + + + Cut with plane + Cortar com plano + + + + Cut an object with a plane + Cortar um objeto com um plano + + + + Arch_Equipment + + + Equipment + Equipamento + + + + Creates an equipment object from a selected object (Part or Mesh) + Cria um equipamento a partir de um objeto selecionado (parte ou malha (mesh)) + Arch_Floor @@ -961,12 +1313,12 @@ Arch_Frame - + Frame Frame - + Creates a frame object from a planar 2D object and a profile Cria um aro a partir de um objeto 2D plano e um perfil @@ -974,7 +1326,7 @@ Arch_IfcExplorer - + Ifc Explorer Explorador Ifc @@ -982,12 +1334,12 @@ Arch_MergeWalls - + Merge Walls Unir paredes - + Merges the selected walls, if possible Une as paredes selecionadas, se possível @@ -995,38 +1347,51 @@ Arch_MeshToShape - + Mesh to Shape - Mesh to Shape + Malha para Forma - + Turns selected meshes into Part Shape objects - Turns selected meshes into Part Shape objects + Transforma as malhas selecionadas em objetos de forma de Peças + + + + Arch_Panel + + + Panel + Painel + + + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Cria um novo painel do zero ou a partir de um objeto selecionado (esboço, arame, face ou sólido) Arch_Rebar - + Rebar - Rebar + Armaduras - + Creates a Reinforcement bar from the selected face of a structural object - Creates a Reinforcement bar from the selected face of a structural object + Cria uma armadura de reforço a partir de uma face selecionada de um objeto estrutural Arch_Remove - + Remove component Remover componente - + Remove the selected components from their parents, or create a hole in a component Remove os componentes selecionados da fonte, ou cria um buraco num componente @@ -1034,38 +1399,38 @@ Arch_RemoveShape - + Remove Shape from Arch - Remover Forma do Arco + Remover Forma - + Removes cubic shapes from Arch components - Remove as formas cúbicas dos componentes do Arco + Remove formas cúbicas de objetos arquitectónicos Arch_Roof - + Roof Telhado - - Creates a roof object from the selected face of an object - Cria um objeto de telhado da face selecionada de um objeto + + Creates a roof object from the selected wire. + Cria um objeto de telhado a partir da linha (wire) selecionada. Arch_SectionPlane - + Section Plane - Plano da Secção + Plano de corte - + Creates a section plane object, including the selected objects Cria um plano de corte, incluindo os objetos selecionados @@ -1073,43 +1438,43 @@ Arch_SelectNonSolidMeshes - + Select non-manifold meshes - Select non-manifold meshes + Selecionar malhas (meshes) não sólidas - + Selects all non-manifold meshes from the document or from the selected groups - Selects all non-manifold meshes from the document or from the selected groups + Seleciona todas as malhas (meshes) não sólidas do documento ou dos grupos selecionados Arch_Site - + Site - Site + sítio - + Creates a site object including selected objects. - Cria um objeto de site, incluindo os objetos selecionados. + Cria um objeto de sítio, incluindo os objetos selecionados. Arch_Space - + Space Espaço - + Creates a space object from selected boundary objects Cria um espaço usando os objetos selecionados como limites - + Creates a stairs object Cria uma escada @@ -1117,20 +1482,20 @@ Arch_SplitMesh - + Split Mesh Dividir Malha - + Splits selected meshes into independent components - Splits selected meshes into independent components + Divide as malhas selecionadas em componentes independentes Arch_Stairs - + Stairs Escadas @@ -1138,12 +1503,12 @@ Arch_Structure - + Structure Estrutura - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Cria um novo objeto de estrutura ou um a partir de um objeto selecionado (esboço, fio, face ou sólido) @@ -1151,25 +1516,38 @@ Arch_Survey - + Survey - Survey + Recolha de dados - + Starts survey - Starts survey + Iniciar recolha de dados + + + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Alternar modo Brep + + + + Force an object to be exported as Brep or not + Força ou não um objeto a ser exportado como Brep no formato IFC Arch_Wall - + Wall Parede - + Creates a wall object from scratch or from a selected object (wire, face or solid) Cria um novo objeto de parede ou um a partir de um objeto selecionado (fio, face ou sólido) @@ -1177,12 +1555,12 @@ Arch_Window - + Window Janela - + Creates a window object from a selected object (wire, rectangle or sketch) Cria um objeto de janela a partir do objeto selecionado (fio, retângulo ou esboço) @@ -1209,16 +1587,6 @@ IFC import Importar IFC - - - Creates groups for each Arch object type - Cria grupos para cada tipo de objeto arquitetónico - - - - Group components by types - Agrupar componentes por tipo - 2D rendering @@ -1245,22 +1613,22 @@ Indica o número de vezes que a espessura da linha visualizada deve ser aplicada para cortar as linhas - + Width: Largura: - + Height: Altura: - + Color: Cor: - + Length: Comprimento: @@ -1332,7 +1700,7 @@ Mesh to Shape Conversion - Mesh to Shape Conversion + Conversão de Malha para Forma @@ -1367,18 +1735,13 @@ If this is checked, holes in faces will be performed by subtraction rather than using wires orientation - If this is checked, holes in faces will be performed by subtraction rather than using wires orientation + Se marcado, orifícios em faces serão executados por subtração em vez de usar a orientação das linhas Cut method Método de corte - - - Import / export - Importar / Exportar - Check this to display debug messages while importing IFC files @@ -1391,74 +1754,44 @@ - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - Se esta opção estiver marcada, os arquivos IFC serão sempre importados com o motor interno, mesmo que o IfcOpenShell esteja instalado + If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted + Se marcado, as aberturas serão importadas como subtrações, caso contrário as formas de parede terão já as aberturas subtraídas - Force python parser - Force python parser - - - - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - - - Separate openings Separar aberturas - + If this is checked, object names will be prefixed with the IFC ID number Se esta opção estiver marcada, os nomes dos objetos terão um prefixo com o número ID do arquivo IFC - + Prefix names with ID number Adicionar prefixo com número ID - + Exclude list: Lista de exclusão: - + A comma-separated list of Ifc entities to exclude from import Lista separada por vírgulas de entidades Ifc para serem excluídas da importação - - Custom IFC schema (internal parser only) - Esquema IFC personalizado (somente para motor interno) - - - + IFC export Exportar IFC - + Scaling factor Fator de escala - - - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - Arquivos IFC são normalmente escritos em milímetros. Se trabalhar com unidades diferentes, isto permite que você escale todas as suas unidades para serem expressas em milímetros. - - - - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - Se esta opção estiver marcada, um arquivo de texto será exportado juntamente com o arquivo ifc, que contém a lista de objetos exportados, para verificação. - - - - Save a list of exported objects - Salvar uma lista dos objetos exportados - Snap to baselines of Arch objects (override with CTRL) @@ -1475,7 +1808,7 @@ Paredes - + mm mm @@ -1487,7 +1820,7 @@ Rebars - Rebars + Armaduras @@ -1500,95 +1833,103 @@ Transparência: - - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - Se esta opção for marcada, os localizadores serão recalculados e aplicados aos objetos, tal como eles estavam no arquivo IFC (mais lento) - - - - Separate placements - Separar localizadores - - - - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - - - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. - Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. + Alguns visualizadores de IFC não gostam de objetos exportados como extrusões. Use isto para forçar todos os objetos a serem exportados como geometria BREP. - - Force export as Breps - Forçar exportação como Breps - - - - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - <html><head/> <body><p>Objetos contendo múltiplos sólidos são normalmente exportados com várias representações. Porém, alguns aplicativos não gostam disso. Pode usar esta opção para unir esses sólidos num só.</p></body></html> - - - - Join multi-solid objects - Unir objetos multi-sólidos - - - + Collada export Exportar para Collada - - WebGL export - Exportar para WebGL + + Hidden geomety pattern + Padrão para linhas escondidas - - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. - Se esta opção for marcada, wires vão ser segmentados, o que resulta em curvas mais precisas, mas arquivos mais pesados. + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + Propriedade SVG stroke-dasharray a ser aplicada a projeções de objetos escondidos. - - Discretize wires - Segmentar wires + + 30, 10 + 30, 10 + + + + Stairs + Escadas + + + + Number of steps: + Número de degraus: + + + + Panels + Painéis + + + + mm + mm + + + + Thickness + Espessura + + + + IFC / DAE / WebGL + IFC / DAE / WebGL + + + + Force export as Brep + Forçar exportação como Brep + + + + Workbench + + + Arch tools + Ferramentas de Arquitetura + + + + Draft tools + Ferramentas de Esboço (Draft) + + + + Draft mod tools + Ferramentas de modificação (Draft) arch - - Arch tools - Ferramentas de Arco - - - - Draft tools - Ferramentas de Esboço - - - - Draft mod tools - Ferramentas de modificação de draft - - - + &Architecture &Arquitetura - + &Draft - &Draft + &Desenho - + Utilities Utilitários - + Snapping Alinhamento e atração diff --git a/src/Mod/Arch/Resources/translations/Arch_ro.qm b/src/Mod/Arch/Resources/translations/Arch_ro.qm index dd82a6b245..f98ebc71ec 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ro.qm and b/src/Mod/Arch/Resources/translations/Arch_ro.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ro.ts b/src/Mod/Arch/Resources/translations/Arch_ro.ts index f7f30b643d..e25a82cfc0 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ro.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ro.ts @@ -4,407 +4,362 @@ Arch - + Components Componente - + Components of this object Componente ale acestui obiect - + Axes Axe - + Create Axis Creați axa - + The intervals between axes Intervalele dintre axe - + The angles of each axis Unghiurile fiecărei axe - + The length of the axes Lungimea axelor - + The size of the axis bubbles Dimensiunea bulelor pentru axe - + Remove Elimină - + Add Adaugă - + Axis Axele - + Distance Distance - + Angle Unghi - - Building - Cladire - - - + Type conversion Conversie de tip - + Create Building Creare clădire - + Floor - Podea + Etaj - + removing sketch support to avoid cross-referencing Se elimină suportul pentru schița pentru a evita referințele încrucișate - - No objects are cut by the plane - Nici un obiect nu intersectează planul - - - + is not closed nu este închis - + is not valid nu este valid - + doesn't contain any solid nu conține nici un solid - + contains a non-closed solid - contine un solid deschis + conţine un solid deschis - + contains faces that are not part of any solid - conține feșe care nu sunt parte a nici unui solid + conţine feţe care nu sunt parte a nici unui solid - + Grouping Gruparea - + Ungrouping Anularea grupării - + Split Mesh - Divide reteaua + Divide reţeaua de discretizare - + Mesh to Shape - Retea in Forma + Discretizare în forma - + All good! no problems found - Toate bune! Nici o problema identificată + Toate bune! Nici o problemă identificată - + Base component Component de bază - + Additions Completări - + Subtractions Scăderi - + Objects Obiecte - + closing Sketch edit închide editarea schiței - + The height of this floor Înălțimea acestui etaj - + Roof Acoperiș - + Create Roof Crează acoperiș - + Unable to create a roof Nu pot crea acoperișul - - The angle of this roof - Unghiul acoperișului - - - + The face number of the base object used to build this roof Numărul feței pentru obiectul de bază folosit la construcția acoperișului - + Page Pagină - + View of Vedere a - + Create Section Plane Creare plan de secționare - + The objects that must be considered by this section plane. Empty means all document Obiectele luate în considerare de planul de secționare. Gol înseamnă tot documentul - - The display size of this section plane - Dimensiunea de afișare pentru acest plan de secționare - - - - No shape has been computed yet, select wireframe rendering and render again - Nici o formă a fost calculată încă, selectaţi wireframe-ul pentru redare şi încercaţi din nou - - - + Skipping invalid object: Se sare peste obiectul invalid: - - Site - Loc - - - + Create Site - Crează loc + Crează teren - - Structure - Structura - - - + Create Structure Crează structură - + The length of this element, if not based on a profile - Lungimea acestui element dacă nu este bazat pe un profil + Lungimea acestui element, dacă nu este bazat pe un profil - + The width of this element, if not based on a profile Lățimea acestui element, dacă nu e bazat pe un profil - + The height or extrusion depth of this element. Keep 0 for automatic Înăltimea sau adâncimea de extrudare a acestui element. 0 înseamnă automat - + Axes systems this structure is built on Sistemul de axe pe care este construită structura - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Direcția normală de extrudare a obiectului. (0,0,0) înseamnă normala automată - + The element numbers to exclude when this structure is based on axes Numerele elementelor de exclus când această structură e bazată pe axe - - Wall - Perete - - - + Create Wall - Creaza perete + Crează perete - + WallTrace WallTrace - + Wall options - Optiuni pentru perete - - - - Width - Latime + Opţiuni pentru perete - Height - Inaltime + Width + Lăţime + Height + Înălţime + + + Alignment - Aliniament + Aliniere - + The width of this wall. Not used if this wall is based on a face - Latimea acestui zid. Nu e folosita daca acest perete se bazeaza pe o fata + Lăţimea acestui zid. Nu e folosită dacă acest perete se bazează pe o faţă - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - Inaltimea acestui zid. Seteaza la 0 pentru valoare automata. Nu este folosita daca acest perete se bazeaza pe un solid + Înăltimea acestui zid. Setează la 0 pentru valoare automată. Nu este folosită dacă acest perete se bazează pe un solid - + The alignment of this wall on its base object, if applicable - Aliniamentul acestui perete pe obiectul de baza, daca e cazul + Aliniamentul acestui perete pe obiectul de bază, dacă e cazul - + Error: Invalid base object - Eroare: obiect de baza invalid + Eroare: obiect de bază invalid - + This mesh is an invalid solid - Aceasta retea este un solid invalid + Aceasta discretizare este un solid invalid - - Window - Fereastră - - - + Create Window - Creare fereastra + Creare fereastră - + the components of this window componentele acestei ferestre - + Edit Editare - + Create/update component - Creaza/improspateaza componentul + Crează/actualizează componentul - + Base 2D object - Obiectul 2D de baza + Obiectul 2D de bază - + Wires Polilinii - + Create new component - Creaza component nou + Crează component nou - + Name Nume - + Type Tip - + Thickness Grosime - + Z offset Expandare pe Z @@ -416,733 +371,1152 @@ file %s successfully created. - fisierul %s a fost creat cu succes. + fişierul %s a fost creat cu succes. - + Error: Couldn't determine character encoding Eroare: nu pot determina codarea caracterelor - + Couldn't locate IfcOpenShell Nu am putut localiza IfcOpenShell - + IFC Schema not found, IFC import disabled. - Schema IFC nu a fost gasita, importurile IFC sunt dezactivate. + Schema IFC nu a fost gasită, importurile IFC sunt dezactivate. + - + successfully written scris cu succes - + The numbering style - The numbering style + Stilul de numerotare - + removing sketch external references to avoid cross-referencing - removing sketch external references to avoid cross-referencing + elimină referințele externe ale schiței pentru a evita încrucișarea referințelor - - Invalid cutplane - Invalid cutplane - - - + Add space boundary - Add space boundary + Adaugă limită de spaţiu - + Remove space boundary - Remove space boundary + Elimină limită de spațiu - + Please select a base object - Please select a base object + Selectați un obiect de bază - + Fixtures - Fixtures + Obiecte fixate - + Armatures - Armatures + Bare de armare - + The placement of this group - The placement of this group + Amplasarea acestui grup Frame - Frame + Cadru - + Create Frame - Create Frame + Crează cadru - - Rebar - Rebar - - - + Create Rebar - Create Rebar + Crează bară de armare - + Please select a base face on a structural object - Please select a base face on a structural object - + Selectați o față de bază pe un obiect structural - + Please select a base object - Please select a base object + Selectați un obiect de bază - - Section - Secţiune - - - + The placement of this object - The placement of this object + Amplasarea acestui obiect - + The terrain of this site - The terrain of this site + Relieful acestui teren - + The address of this site - The address of this site + Adresa acestui teren - + The geographic coordinates of this site - The geographic coordinates of this site + Coordonatele geografice ale acestui teren - + An url that shows this site in a mapping website An url that shows this site in a mapping website - - Space - Space - - - + Create Space - Create Space + Crează spațiu - - A base shape defining this space - A base shape defining this space - - - + The objects that make the boundaries of this space object - The objects that make the boundaries of this space object + Obiectele care fac limitele acestui spțiu obiect - - Stairs - Stairs - - - + Create Stairs - Create Stairs + Crează scări - + The length of these stairs, if no baseline is defined - The length of these stairs, if no baseline is defined + Lungimea acestor scări, dacă nu este definită linia de bază - + The width of these stairs - The width of these stairs + Lățimea acestor scări - + The total height of these stairs - The total height of these stairs + Înălțimea totală a acestor scări - + The alignment of these stairs on their baseline, if applicable - The alignment of these stairs on their baseline, if applicable + Alinierea acestor scări pe linia de bază, dacă se aplică - + The number of risers in these stairs - The number of risers in these stairs + Numărul contratreptelor în aceste scări - + The depth of the treads of these stairs - The depth of the treads of these stairs + Adâncimea treptelor acestor scări - + The height of the risers of these stairs - The height of the risers of these stairs + Înălțimea contratreptelor acestor scări - + The size of the nosing The size of the nosing - + The thickness of the treads - The thickness of the treads + Grosimea treptelor - + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in - The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in + Raportul Blondel, trebuie să fie între 62 și 64 cm sau 24,5 și 25,5 in - + The type of landings of these stairs The type of landings of these stairs - + The type of winders in these stairs The type of winders in these stairs - + The type of structure of these stairs - The type of structure of these stairs + Tipul structurii acestor scări - + The thickness of the massive structure or of the stringers - The thickness of the massive structure or of the stringers + Grosimea structurii masive sau a lonjeroanelor - + The width of the stringers - The width of the stringers + Lățimea lonjeroanelor - + The offset between the border of the stairs and the structure The offset between the border of the stairs and the structure Wood - Wood + Lemn Steel - Steel + Oţel - + Structure options - Structure options + Opțiuni structură - + Preset - Preset + Presetare - + Length Lungime - + Rotate Rotire - + Con&tinue - Con&tinue + Con&tinuare - + An optional extrusion path for this element - An optional extrusion path for this element + O cale de extrudare opţională pentru acest element - + Armatures contained in this element - Armatures contained in this element + Armăturile conţinute în acest element - - The role of this structural element - The role of this structural element - - - + The structural nodes of this element - The structural nodes of this element + Nodurile structurale ale acestui element - + Error: The base shape couldn't be extruded along this tool object - Error: The base shape couldn't be extruded along this tool object + Eroare: Forma de baza nu a putut fi extrudată de-a lungul acestui obiect unealtă - + Couldn't compute a shape - Couldn't compute a shape + Nu s-a putut calcula o formă - + Merge Wall - Merge Wall + Perete îmbinat - + The selected wall contain no subwall to merge - The selected wall contain no subwall to merge + Peretele selectat nu conține pereți auxiliari pentru îmbinat - + Please select only wall objects - Please select only wall objects + Selectați numai obiectele perete - + Merge Walls - Merge Walls + Pereți îmbinați - + The length of this wall. Not used if this wall is based on an underlying object - The length of this wall. Not used if this wall is based on an underlying object + Lungimea acestui perete. Nu se folosește dacă acest perete este bazat pe un obiect de bază - + The face number of the base object used to build this wall - The face number of the base object used to build this wall + Numărul feței obiectului de bază folosit la construirea acestui perete - + The offset between this wall and its baseline (only for left and right alignments) - The offset between this wall and its baseline (only for left and right alignments) + Ofsetul între acest perete şi linia sa de bază (numai pentru aliniamente stânga şi la dreapta) - + Pick a face on an existing object or select a preset - Pick a face on an existing object or select a preset + Alege o față pe un obiect existent sau selectaţi o presetare - + Window options - Window options + Opțiunile ferestrei - + The depth of the hole that this window makes in its host object. Keep 0 for automatic. - The depth of the hole that this window makes in its host object. Keep 0 for automatic. + Adâncimea găurii care o face această fereastră în obiectul gazdă. Păstraţi 0 pentru automat. - - an optional volume to be subtracted from hosts of this window - an optional volume to be subtracted from hosts of this window - - - + The width of this window (for preset windows only) - The width of this window (for preset windows only) + Lățimea acestei ferestre (numai pentru preconfigurarea ferestrelor) - + The height of this window (for preset windows only) - The height of this window (for preset windows only) + Înălțimea acestei ferestre (numai pentru preconfigurarea ferestrelor) - + The normal direction of this window - The normal direction of this window + Direcția normală a acestei ferestre - - The role of this window - The role of this window - - - + Unable to create component - Unable to create component + Nu se poate crea componentul pycollada not found, collada support is disabled. - pycollada not found, collada support is disabled. + nu a fost găsit pycollada, suportul collada este dezactivat. - + IfcOpenShell not found or disabled, falling back on internal parser. - IfcOpenShell not found or disabled, falling back on internal parser. - + IfcOpenShell nu e găsit sau e dezactivat, se revine pe parser-ul intern. - + Distances (mm) and angles (deg) between axes - Distances (mm) and angles (deg) between axes + Distanţele (mm) şi unghiurile (grade) între axe - + Error computing the shape of this object - Error computing the shape of this object + Eroare la calcularea formei acestui obiect - - StructuralSystem - StructuralSystem - - - + Create Structural System - Create Structural System + Crează sistem structural - - The role of this wall - The role of this wall - - - + Error: IfcOpenShell is not installed - Error: IfcOpenShell is not installed + Eroare: IfcOpenShell nu este instalat - + Error: your IfcOpenShell version is too old - Error: your IfcOpenShell version is too old + Eroare: versiunea de IfcOpenShell este prea veche Found a shape containing curves, triangulating - Found a shape containing curves, triangulating + S-a găsit o formă care conține curbe, se triangulează + + + Invalid cutplane + + Plan de tăiere invalid + + + + No objects are cut by the plane + + Nici un obiect nu e tăiat de plan + + + + + Object doesn't have settable IFC Attributes + Obiectul nu are atribute IFC reglabile + + + + Disabling Brep force flag of object + Dezactivarea Brep force flag-ul obiectului + + + + Enabling Brep force flag of object + Activarea Brep force flag-ul obiectului + + + + The base object this component is built upon + Obiectul de bază pe care această componentă este construită + + + + Other shapes that are appended to this object + Alte forme care sunt adăugate la acest obiect + + + + Other shapes that are subtracted from this object + Alte forme care sunt scăzute din acest obiect + + + + An optional description for this component + O descriere opţională pentru această componentă + + + + An optional tag for this component + Un tag opţional pentru această componentă + + + + Custom IFC properties and attributes + Proprietăţi şi atribute IFC particularizate + + + + A material for this object + Un material pentru acest obiect + + + + The role of this object + Rolul acestui obiect + + + + Specifies if this object must move together when its host is moved + Specifică dacă acest obiect trebuie să se mute împreună cu gazda atunci când este mutată + + + + has no solid + nu are nici un solid + + + + has an invalid shape + are o formă nevalidă + + + + has a null shape + are o formă nulă + + + + Cutting + Tăiere + + + + You must select a base object first! + Trebuie să selectaţi un obiect de bază mai întâi! + + + + Create Equipment + Creare Echipament + + + + You must select exactly one base object + Trebuie să selectaţi un singur obiect bază + + + + The selected object must be a mesh + Obiectul selectat trebuie să fie un mesh + + + + This mesh has more than 1000 facets. + Acest mesh are mai mult de 1000 de faţete. + + + + This operation can take a long time. Proceed? + Această operaţiune poate dura mult timp. Procedez? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + Mesh-ul are mai mult de 500 de faţete. Va dura câteva minute... + + + + Create 3 views + Creează 3 vederi + + + + an optional 2D shape representing a top view of this equipment + o formă 2D opţională reprezentând o vedere de sus a acestui echipament + + + + an optional 2D shape representing a front view of this equipment + o formă 2D opţională reprezentând o vedere frontală a acestui echipament + + + + an optional 2D shape representing a side view of this equipment + o formă 2D opţională reprezentând o vedere laterală a acestui echipament + + + + The model description of this equipment + Descrierea în model a echipamentului + + + + The url of the product page of this equipment + Adresa url a paginii de produs a echipamentului + + + + Create Panel + Creează panou + + + + Panel options + Opțiunile panoului + + + + The thickness or extrusion depth of this element + Grosimea sau adâncimea de extrudare ale acestui element + + + + The number of sheets to use + Numărul foilor de utilizat + + + + The offset between this panel and its baseline + Ofsetul între acest panou şi linia de bază + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Parametrii profilului de acoperiș +* Unghiul : panta în grade față de orizontală. +* Lungime orizontală : distanța între perete și coamă. +* Grosime : Grosimea laterală a acoperișului. +* Streașină : distanța între jgheab (linia streșinii) și zid. +* Înălțime : înălțimea coamei (calculată automat). +* IdRel : Id relativ pentru calcule automatice. + +--- + +Dacă Unghiul = 0 și Lungimea orizontală = 0 atunci profilul este identic cu profilul relativ. +Dacă Unghiul = 0 atunci unghiul este calculat astfel încât înălțimea să fie aceeași ca a profilului relativ. +Dacă Lungimea orizontală = 0 atunci Lungimea orizontală este calculată astfel încât înălțimea să fie aceeași ca a profilului relativ. + + + + Id + Id + + + + IdRel + IdRel + + + + If false, non-solids will be cut too, with possible wrong results. + În caz de fals, non-solidele vor fi de asemenea tăiate, cu posibile rezultate greşite. + + + + The display length of this section plane + Lungimea de afişare a planului de secțiune + + + + The display height of this section plane + Înălțimea de afişare a planului de secțiune + + + + The size of the arrows of this section plane + Dimensiunea săgeţilor acestui plan de secțiune + + + + The computed floor area of this space + Aria pardoselii, calculată, a acestui spațiu + + + + The finishing of the floor of this space + Finisajul pardoselii acestui spațiu + + + + The finishing of the walls of this space + Finisajul pereților acestui spațiu + + + + The finishing of the ceiling of this space + Finisajul tavanului acestui spațiu + + + + Objects that are included inside this space, such as furniture + Obiecte care sunt incluse în acest spațiu, de exemplu mobila + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + Textul care se prezintă. Folosește $area, $label, $tag, $floor, $walls, $ceiling pentru a insera datele respective + + + + The name of the font + Denumirea fontului + + + + The color of the area text + Culoarea textului care reprezintă aria + + + + The size of the text font + Dimensiunea fontului de text + + + + The size of the first line of text + Dimensiunea primei lini de text + + + + The space between the lines of text + Spaţiul dintre liniile de text + + + + The position of the text. Leave (0,0,0) for automatic position + Poziţia textului. Lăsaţi (0,0,0) pentru poziţia automată + + + + The justification of the text + Justificarea textului + + + + The number of decimals to use for calculated texts + Numărul de zecimale utilizat pentru textele calculate + + + + Show the unit suffix + Arată sufixul unității + + + + A description of the standard profile this element is based upon + O descriere a profilului standard pe care acest element este bazat + + + + Sill height + Înălțime parapet + + + + CutVolume + Volum tăiat + + + + CutPlane + Plan tăiat (de tăiere) + + + + PreviewCutVolume + Previzualizare volum tăiat + + + + Cut Plane + Plan de tăiere + + + + Cut Plane options + Opțiuni ale planului de tăiere + + + + Wich side to cut + Care parte se taie + + + + Behind + În spate + + + + Front + Fata + + + + Crossing point not found in profile. + + Punctul de trecere nu a fost găsit în profil. + + + + A list of angles for each roof pane + O listă de unghiuri pentru fiecare panou de acoperiş + + + + A list of horizontal length projections for each roof pane + O listă de proiecții orizontale a lungimilor pentru fiecare panou de acoperiş + + + + A list of IDs of relative profiles for each roof pane + O lista de ID-uri de profile relative pentru fiecare panou de acoperiş + + + + A list of thicknesses for each roof pane + O listă de grosimi pentru fiecare panou de acoperiş + + + + A list of overhangs for each roof pane + A list of overhangs for each roof pane + + + + A list of calculated heights for each roof pane + A list of calculated heights for each roof pane + + + + Angle (deg) + Unghiul (grade) + + + + Run (mm) + Distanță (mm) + + + + Thickness (mm) + Grosime (mm) + + + + Overhang (mm) + Streașină (mm) + + + + Height (mm) + Înălțime (mm) + + + + Arch_3Views + + + 3 views from mesh + 3 vederi din mesh + + + + Creates 3 views (top, front, side) from a mesh-based object + Creează 3 vizualizări (partea de sus, faţă, laterale) dintr-un obiect bazat pe mesh + Arch_Add - + Add component - Adauga component + Adaugă componentă - + Adds the selected components to the active object - Adauga componentele selectate al obiectul activ + Adaugă componentele selectate în obiectul activ Arch_Axis - + Axis Axele - + Creates an axis system. - Creaza un sistem de axe. + Crează un sistem de axe. Arch_Building - + Building - Cladire + Construcţia - + Creates a building object including selected objects. - Creaza un obiect-cladire incluzand obiectele selectate. + Crează un obiect-construcţie incluzând obiectele selectate. Arch_Check - + Check - Verifica + Verifică - + Checks the selected objects for problems - Verifica obiectele selectate pentru probleme + Verifică obiectele selectate pentru probleme - + Explore the contents of an Ifc file - Explore the contents of an Ifc file + Explorează conținutul unui fișier ifc Arch_CloseHoles - + Close holes - Inchide gauri + Închide găuri - + Closes holes in open shapes, turning them solids - Inchide gaurile din formele deschise, transformandu-le in solide + Închide găurile din formele deschise, transformându-le în solide - Arch_Fixture + Arch_CutPlane + + + Cut with plane + Taie cu plan + + + + Cut an object with a plane + Taie un obiect cu un plan + + + + Arch_Equipment + + + Equipment + Echipament + + + + Creates an equipment object from a selected object (Part or Mesh) + Creează un obiect de echipament dintr-un obiect selectat (Part sau Mesh) + Arch_Floor Floor - Podea + Etaj Creates a floor object including selected objects - Creează un obiect-podea, incluzand obiectele selectate + Creează un obiect-etaj, incluzând obiectele selectate Arch_Frame - + Frame - Frame + Cadru - + Creates a frame object from a planar 2D object and a profile - Creates a frame object from a planar 2D object and a profile + Crează un obiect cadru dintr-un obiect plan 2D și un profil Arch_IfcExplorer - + Ifc Explorer - Ifc Explorer + Explorator ifc Arch_MergeWalls - + Merge Walls - Merge Walls + Pereți îmbinați - + Merges the selected walls, if possible - Merges the selected walls, if possible + Îmbină zidurile selectate, dacă este posibil Arch_MeshToShape - + Mesh to Shape - Retea in Forma + Discretizare în forma - + Turns selected meshes into Part Shape objects - Transforma retelele selectate in obiecte forma + Transformă reţelele selectate în obiecte forma + + + + Arch_Panel + + + Panel + Panou + + + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Creează un obiect de panoul de la zero sau de la un obiect selectat (schiță, wire, față sau solid) Arch_Rebar - + Rebar - Rebar + Bară de armare - + Creates a Reinforcement bar from the selected face of a structural object - Creates a Reinforcement bar from the selected face of a structural object + Creează o bară de armare din fața selectată a unui obiect structural Arch_Remove - + Remove component - Elimina component + Elimină componentă - + Remove the selected components from their parents, or create a hole in a component - Elimina componentele selectate din obiectele-parinte sau creaza o gaura in component + Elimină componentele selectate din obiectele-părinte sau crează o gaură în componentă Arch_RemoveShape - + Remove Shape from Arch - Inlatura forma din arhitectura + Înlătura forma din arhitectura - + Removes cubic shapes from Arch components - Inlatura formele cubice din componentele arhitecturale + Înlătura formele cubice din componentele arhitecturale Arch_Roof - + Roof Acoperiș - - Creates a roof object from the selected face of an object - Creaza un obiect-acoperis din fata selectata a obiectului + + Creates a roof object from the selected wire. + Creează un obiect de acoperiş din wire-ul (sârmă, fir) selectat. Arch_SectionPlane - + Section Plane - Planul de selectie + Planul de selecţie - + Creates a section plane object, including the selected objects - Creaza un obiect - sectiune plana incluzand obiectele selectate + Crează un obiect - secţiune plană incluzând obiectele selectate Arch_SelectNonSolidMeshes - + Select non-manifold meshes - Selectati retele non-manifold + Selectaţi reţele non-manifold - + Selects all non-manifold meshes from the document or from the selected groups - Selectati toate retelele non-manifold din document sau din grupuil selectat + Selectaţi toate reţelele non-manifold din document sau din grupurile selectate Arch_Site - + Site - Loc + Teren - + Creates a site object including selected objects. - Creează un obiect site, incluzând obiectele selectate. + Crează un obiect teren, incluzând obiectele selectate. Arch_Space - + Space - Space + Spaţiu - + Creates a space object from selected boundary objects - Creates a space object from selected boundary objects + Creează un spaţiu obiect din limitele obiectelor selectate - + Creates a stairs object - Creates a stairs object + Creează un obiect scară Arch_SplitMesh - + Split Mesh - Divide reteaua + Divide reţeaua de discretizare - + Splits selected meshes into independent components - Imparte obiectul mesh selectat în componente independente + Împarte discretizările selectate în componente independente Arch_Stairs - + Stairs - Stairs + Scări Arch_Structure - + Structure Structura - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Creează un obiect structura de la zero sau dintr-un obiect selectat (schita, sârmă, fata sau solide) @@ -1150,25 +1524,38 @@ Arch_Survey - + Survey - Survey + Sondaj - + Starts survey - Starts survey + Pornește sondajul + + + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Toggle IFC Brep flag + + + + Force an object to be exported as Brep or not + Forţează un obiect să fie exportat ca Brep sau nu Arch_Wall - + Wall Perete - + Creates a wall object from scratch or from a selected object (wire, face or solid) Creează un obiect perete de la zero sau dintr-un obiect selectat (sârmă, fata sau solid) @@ -1176,12 +1563,12 @@ Arch_Window - + Window Fereastră - + Creates a window object from a selected object (wire, rectangle or sketch) Creaza un obiect fereastra din obiectele selectate(polilinie, dreptunghi sau schita) @@ -1208,16 +1595,6 @@ IFC import Import IFC - - - Creates groups for each Arch object type - Creaza grupuri pentru fiecare tip de obiect arhitectural - - - - Group components by types - Grupeaza componentele dupa tip - 2D rendering @@ -1244,29 +1621,29 @@ Specifica de cate ori grosimea liniei prebuie aplicata pentru liniile de taiere - + Width: Latime: - + Height: Inaltime: - + Color: - Color: + Culoare: - + Length: Lungime: Diameter - Diameter + Diametru @@ -1276,217 +1653,182 @@ The default width for new windows - The default width for new windows + Lăţimea implicită pentru ferestrele noi The default height for new windows - The default height for new windows + Înălţimea implicită pentru ferestrele noi Thickness: - Thickness: + Grosime: The default thickness for new windows - The default thickness for new windows + Grosimea implicită pentru ferestrele noi Frame color: - Frame color: + Culoare cadru: Glass color: - Glass color: + Culoare sticlă: Snapping - Snapping + Ancorare Walls drawing - Walls drawing + Desenare pereți Auto-join walls - Auto-join walls + Auto-alăturare pereţi If this is checked, when 2 similar walls are being connected, their underlying sketches will be joined into one, and the two walls will become one - If this is checked, when 2 similar walls are being connected, their underlying sketches will be joined into one, and the two walls will become one + Dacă aceasta este bifată, când 2 pereți similari sunt conectați, schițele lor care stau la baza vor fi unite într-una şi pereţii se vor uni într-unul Join walls base sketches when possible - Join walls base sketches when possible + Unește schițele de bază a pereților, când e posibil Mesh to Shape Conversion - Mesh to Shape Conversion + Conversie Mesh în Shape (Formă) If this is checked, conversion is faster but the result might still contain triangulated faces - If this is checked, conversion is faster but the result might still contain triangulated faces + Dacă aceasta e bifată, conversia va fi mai rapidă, dar rezultatul ar putea încă conține fețe triangulate Fast conversion - Fast conversion + Conversie rapidă Tolerance: - Tolerance: + Toleranţă: Tolerance value to use when checking if 2 adjacent faces as planar - Tolerance value to use when checking if 2 adjacent faces as planar + Valoarea de toleranță folosită când se verifică dacă două fețe adiacente sunt coplanare If this is checked, flat groups of faces will be force-flattened, resulting in possible gaps and non-solid results - If this is checked, flat groups of faces will be force-flattened, resulting in possible gaps and non-solid results + Dacă aceasta este bifată, grupuri de fațete plate vor fi aplatizate forțat, rezultând în posibile găuri și rezultate ne-solide Force flat faces - Force flat faces + Forțează fețe plane If this is checked, holes in faces will be performed by subtraction rather than using wires orientation - If this is checked, holes in faces will be performed by subtraction rather than using wires orientation + Dacă aceasta e bifată, găuri în fațete vor fi perforate mai degrabă prin substracție decât folosind orientarea wire-lor (firelor, sârmelor, marginilor) Cut method - Cut method - - - - Import / export - Import / export + Metodă de tăiere Check this to display debug messages while importing IFC files - Check this to display debug messages while importing IFC files + Bifați asta pentru a se afișa mesajul de depanare la importul fișierelor IFC Show debug messages - Show debug messages + Arată mesajele de depanare - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed + If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted + Dacă aceasta e bifată, deschiderile vor fi importate ca substracții, altfel formele de perete vor avea deschiderile deja scăzute - Force python parser - Force python parser + Separate openings + Deschideri separate + + + + If this is checked, object names will be prefixed with the IFC ID number + Dacă aceasta e bifată, numele obiectelor va avea prefixul dat de numărul din ID-ul IFC + + + + Prefix names with ID number + Numele prefixului cu numărul ID - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - - - - Separate openings - Separate openings - - - - If this is checked, object names will be prefixed with the IFC ID number - If this is checked, object names will be prefixed with the IFC ID number - - - - Prefix names with ID number - Prefix names with ID number - - - Exclude list: - Exclude list: + Listă excluderi: - + A comma-separated list of Ifc entities to exclude from import - A comma-separated list of Ifc entities to exclude from import + O listă cu separare prin virgulă a entităților IFC excluse de la import - - Custom IFC schema (internal parser only) - Custom IFC schema (internal parser only) - - - + IFC export - IFC export + export IFC - + Scaling factor - Scaling factor - - - - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - - - - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - - - - Save a list of exported objects - Save a list of exported objects + Factor de scalare Snap to baselines of Arch objects (override with CTRL) - Snap to baselines of Arch objects (override with CTRL) + Snap la liniile de baza a obiectelor de Arch (suprascrie cu CTRL) Defaults - Defaults + Implicite Walls - Walls + Pereţi - + mm mm Structures - Structures + Structuri Rebars - Rebars + Bare de armare @@ -1499,97 +1841,105 @@ Transparenţă: - - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - - - - Separate placements - Separate placements - - - - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - - - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. - Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. + Unele vizualizatoare de IFC nu tolerează obiecte exportate ca extruziuni, Folosește aceasta pentru a forța exportarea obiectelor ca geometrie BREP. - - Force export as Breps - Force export as Breps - - - - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - - - - Join multi-solid objects - Join multi-solid objects - - - + Collada export - Collada export + Export collada - - WebGL export - WebGL export + + Hidden geomety pattern + Modelul (pattern-ul) geometriei ascunse - - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + This is the SVG stroke-dasharray property to apply to projections of hidden objects. - - Discretize wires - Discretize wires + + 30, 10 + 30, 10 + + + + Stairs + Scări + + + + Number of steps: + Numărul de trepte: + + + + Panels + Panouri + + + + mm + mm + + + + Thickness + Grosime + + + + IFC / DAE / WebGL + IFC / DAE / WebGL + + + + Force export as Brep + Forțează exportul ca Brep + + + + Workbench + + + Arch tools + Unelte Arch + + + + Draft tools + Unelte Draft + + + + Draft mod tools + Draft mod tools arch - - Arch tools - Unelte de arhitectura - - - - Draft tools - Unelte pentru ciorne - - - - Draft mod tools - Unelte pentru modificarea ciornei - - - + &Architecture &Arhitectura - + &Draft &Schiţă - + Utilities - Utilities + Utilități - + Snapping - Snapping + Ancorare diff --git a/src/Mod/Arch/Resources/translations/Arch_ru.qm b/src/Mod/Arch/Resources/translations/Arch_ru.qm index 17de4f0c3f..a9bbf01db8 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ru.qm and b/src/Mod/Arch/Resources/translations/Arch_ru.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ru.ts b/src/Mod/Arch/Resources/translations/Arch_ru.ts index 60e30da30e..d3f8526e23 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ru.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ru.ts @@ -4,407 +4,362 @@ Arch - + Components Компоненты - + Components of this object Компоненты этого объекта - + Axes Оси - + Create Axis Создать оси координат - + The intervals between axes Интервалы между осями - + The angles of each axis Углы между каждой парой осей - + The length of the axes Длина осей - + The size of the axis bubbles Размер марок - + Remove Удалить - + Add Добавить - + Axis Ось - + Distance Расстояние - + Angle Угол - - Building - Здание - - - + Type conversion Преобразование типа - + Create Building Создать здание - + Floor Этаж - + removing sketch support to avoid cross-referencing удаление в эскизе пустые перекрёстные ссылки - - No objects are cut by the plane - Полскость не пересекает ни один объект - - - + is not closed не замкнут - + is not valid не подходит - + doesn't contain any solid не содержит каких-либо тел - + contains a non-closed solid содержит незамкнутое тело - + contains faces that are not part of any solid содержит грани, которые не являются частью каких-либо тел - + Grouping Группировка - + Ungrouping Разгруппировка - + Split Mesh Разделить сетку - + Mesh to Shape Сетка для фигуры - + All good! no problems found Все в порядке! проблем не найдено - + Base component Базовый компонент - + Additions Дополнения - + Subtractions Вычеты - + Objects Объекты - + closing Sketch edit закрытие редактирования эскиза - + The height of this floor Высота этажного перекрытия - + Roof Крыша - + Create Roof Создать крышу - + Unable to create a roof Невозможно создать крышу - - The angle of this roof - Угол наклона этой крыши - - - + The face number of the base object used to build this roof Количество поверхностей базового объекта используемых в конструкции этой крыши - + Page Страница - + View of Вид - + Create Section Plane Создайте секущую плоскость - + The objects that must be considered by this section plane. Empty means all document Объекты должны быть утверждены в этой области плана. Пустота означает для всех документов - - The display size of this section plane - Размер отображения этой плоскости сечения - - - - No shape has been computed yet, select wireframe rendering and render again - Расчёты не могут быть выполнены, необходимо выбрать каркас и повторить рендеринг снова - - - + Skipping invalid object: Пропуск недопустимого объекта: - - Site - Место - - - + Create Site Создать площадку - - Structure - Структура - - - + Create Structure Создать структуру - + The length of this element, if not based on a profile Длина элемента, если она не определена в профиле - + The width of this element, if not based on a profile Ширина элемента, если она не определена в профиле - + The height or extrusion depth of this element. Keep 0 for automatic Высота или глубина выдавливания элемента. Задайте 0 для автоматического определения - + Axes systems this structure is built on Структура системы осей построена на - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Нормальное направление выдавливания для этого объекта (оставить (0,0,0) для задания автоматической нормали) - + The element numbers to exclude when this structure is based on axes Число исключающихся элементов при построении структуры на осях - - Wall - Стена - - - + Create Wall Создать стену - + WallTrace Контур стен - + Wall options Параметры стены - + Width Ширина - + Height Высота - + Alignment Выравнивание - + The width of this wall. Not used if this wall is based on a face Ширина стены. Не используется , если эта стена сформирована на поверхности - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Высота стены. 0 - высота автоматом. Не используется , если эта стена сформирована на модели - + The alignment of this wall on its base object, if applicable Выравнивание стены на базовом объекте, если возможно - + Error: Invalid base object Ошибка: Недопустимый базовый объект - + This mesh is an invalid solid Эта сетка является недействительным телом - - Window - Окно - - - + Create Window Создать окно - + the components of this window компоненты этого окна - + Edit Правка - + Create/update component Создание/обновление компонента - + Base 2D object Базовый объект 2D - + Wires Направляющие - + Create new component Создать новый компонент - + Name Название - + Type Тип - + Thickness Толщина - + Z offset Z-смещение @@ -419,395 +374,350 @@ файл %s успешно создан. - + Error: Couldn't determine character encoding Ошибка: Не удалось определить кодировку символов - + Couldn't locate IfcOpenShell Не удается найти IfcOpenShell - + IFC Schema not found, IFC import disabled. МФК схемы не найдена, МФК импорт отключен - + successfully written успешно записаны - + The numbering style Стиль номерации - + removing sketch external references to avoid cross-referencing removing sketch external references to avoid cross-referencing - - Invalid cutplane - Invalid cutplane - - - + Add space boundary - Add space boundary + Добавить отступ - + Remove space boundary - Remove space boundary + Убрать отступ - + Please select a base object - Please select a base object + Пожалуйста, выберите базовый объект - + Fixtures - Fixtures + Арматура - + Armatures - Armatures + Каркасы - + The placement of this group - The placement of this group + Расположение этой группы Frame - Frame + каркас - + Create Frame - Create Frame + Создать каркас - - Rebar - Rebar - - - + Create Rebar - Create Rebar + Задать армирование - + Please select a base face on a structural object - Please select a base face on a structural object + Пожалуйста, выберите базовую грань структурного объекта - + Please select a base object - Please select a base object + Пожалуйста, выберите базовый объект - - Section - Раздел - - - + The placement of this object - The placement of this object + Размещение данного объекта - + The terrain of this site - The terrain of this site + Местность стройплощадки - + The address of this site - The address of this site + Адрес стройплощадки - + The geographic coordinates of this site - The geographic coordinates of this site + Географические координаты стройплощадки - + An url that shows this site in a mapping website An url that shows this site in a mapping website - - Space - Space - - - + Create Space - Create Space + Задать пространство - - A base shape defining this space - A base shape defining this space - - - + The objects that make the boundaries of this space object The objects that make the boundaries of this space object - - Stairs - Лестницы - - - + Create Stairs Создать лестницу - + The length of these stairs, if no baseline is defined Длинна лестниц, если они определяются не базовой линией - + The width of these stairs - The width of these stairs + Ширина этой лестницы - + The total height of these stairs - The total height of these stairs + Общая высота этой лестницы - + The alignment of these stairs on their baseline, if applicable The alignment of these stairs on their baseline, if applicable - + The number of risers in these stairs - The number of risers in these stairs + Количество подступёнков - + The depth of the treads of these stairs - The depth of the treads of these stairs + Глубина проступи - + The height of the risers of these stairs - The height of the risers of these stairs + Высота подступёнка - + The size of the nosing - The size of the nosing + Размер выступа проступи - + The thickness of the treads - The thickness of the treads + Толщина проступи - + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in - The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in + Пропорция Блонделя, должен быть между 62 и 64 см или между 24,5 и 25,5 дюймами - + The type of landings of these stairs - The type of landings of these stairs + Тип лестничных площадок - + The type of winders in these stairs The type of winders in these stairs - + The type of structure of these stairs The type of structure of these stairs - + The thickness of the massive structure or of the stringers The thickness of the massive structure or of the stringers - + The width of the stringers - The width of the stringers + Ширина тетивы - + The offset between the border of the stairs and the structure The offset between the border of the stairs and the structure Wood - Wood + Древесина Steel - Steel + Сталь - + Structure options Structure options - + Preset - Preset + Набор - + Length Длина - + Rotate Повернуть - + Con&tinue - Con&tinue + &Продолжить - + An optional extrusion path for this element An optional extrusion path for this element - + Armatures contained in this element Armatures contained in this element - - The role of this structural element - The role of this structural element - - - + The structural nodes of this element The structural nodes of this element - + Error: The base shape couldn't be extruded along this tool object Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape Couldn't compute a shape - + Merge Wall - Merge Wall + Объединить стенку - + The selected wall contain no subwall to merge The selected wall contain no subwall to merge - + Please select only wall objects Please select only wall objects - + Merge Walls - Merge Walls + Объединить стенки - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) - + Pick a face on an existing object or select a preset Pick a face on an existing object or select a preset - + Window options Window options - + The depth of the hole that this window makes in its host object. Keep 0 for automatic. The depth of the hole that this window makes in its host object. Keep 0 for automatic. - - an optional volume to be subtracted from hosts of this window - an optional volume to be subtracted from hosts of this window - - - + The width of this window (for preset windows only) The width of this window (for preset windows only) - + The height of this window (for preset windows only) The height of this window (for preset windows only) - + The normal direction of this window The normal direction of this window - - The role of this window - The role of this window - - - + Unable to create component - Unable to create component + Невозможно создать компонент @@ -818,68 +728,495 @@ - + IfcOpenShell not found or disabled, falling back on internal parser. IfcOpenShell not found or disabled, falling back on internal parser. - + Distances (mm) and angles (deg) between axes Distances (mm) and angles (deg) between axes - + Error computing the shape of this object Error computing the shape of this object - - StructuralSystem - StructuralSystem - - - + Create Structural System Create Structural System - - The role of this wall - The role of this wall - - - + Error: IfcOpenShell is not installed Error: IfcOpenShell is not installed - + Error: your IfcOpenShell version is too old - Error: your IfcOpenShell version is too old - + Ошибка: ваша версия IfcOpenShell слишком устарела Found a shape containing curves, triangulating - Found a shape containing curves, triangulating + Найти фигуры, содержащие кривые, триангуляции + + + + Invalid cutplane + + Invalid cutplane + + + No objects are cut by the plane + + No objects are cut by the plane + + + + + Object doesn't have settable IFC Attributes + Object doesn't have settable IFC Attributes + + + + Disabling Brep force flag of object + Disabling Brep force flag of object + + + + Enabling Brep force flag of object + Enabling Brep force flag of object + + + + The base object this component is built upon + The base object this component is built upon + + + + Other shapes that are appended to this object + Other shapes that are appended to this object + + + + Other shapes that are subtracted from this object + Other shapes that are subtracted from this object + + + + An optional description for this component + An optional description for this component + + + + An optional tag for this component + An optional tag for this component + + + + Custom IFC properties and attributes + Custom IFC properties and attributes + + + + A material for this object + A material for this object + + + + The role of this object + The role of this object + + + + Specifies if this object must move together when its host is moved + Specifies if this object must move together when its host is moved + + + + has no solid + has no solid + + + + has an invalid shape + has an invalid shape + + + + has a null shape + has a null shape + + + + Cutting + Cutting + + + + You must select a base object first! + You must select a base object first! + + + + Create Equipment + Create Equipment + + + + You must select exactly one base object + You must select exactly one base object + + + + The selected object must be a mesh + The selected object must be a mesh + + + + This mesh has more than 1000 facets. + This mesh has more than 1000 facets. + + + + This operation can take a long time. Proceed? + This operation can take a long time. Proceed? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + The mesh has more than 500 facets. This will take a couple of minutes... + + + + Create 3 views + Create 3 views + + + + an optional 2D shape representing a top view of this equipment + an optional 2D shape representing a top view of this equipment + + + + an optional 2D shape representing a front view of this equipment + an optional 2D shape representing a front view of this equipment + + + + an optional 2D shape representing a side view of this equipment + an optional 2D shape representing a side view of this equipment + + + + The model description of this equipment + The model description of this equipment + + + + The url of the product page of this equipment + The url of the product page of this equipment + + + + Create Panel + Create Panel + + + + Panel options + Panel options + + + + The thickness or extrusion depth of this element + The thickness or extrusion depth of this element + + + + The number of sheets to use + The number of sheets to use + + + + The offset between this panel and its baseline + The offset between this panel and its baseline + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + + + + Id + Id + + + + IdRel + IdRel + + + + If false, non-solids will be cut too, with possible wrong results. + If false, non-solids will be cut too, with possible wrong results. + + + + The display length of this section plane + The display length of this section plane + + + + The display height of this section plane + The display height of this section plane + + + + The size of the arrows of this section plane + The size of the arrows of this section plane + + + + The computed floor area of this space + The computed floor area of this space + + + + The finishing of the floor of this space + The finishing of the floor of this space + + + + The finishing of the walls of this space + The finishing of the walls of this space + + + + The finishing of the ceiling of this space + The finishing of the ceiling of this space + + + + Objects that are included inside this space, such as furniture + Objects that are included inside this space, such as furniture + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + + + + The name of the font + The name of the font + + + + The color of the area text + The color of the area text + + + + The size of the text font + The size of the text font + + + + The size of the first line of text + The size of the first line of text + + + + The space between the lines of text + The space between the lines of text + + + + The position of the text. Leave (0,0,0) for automatic position + The position of the text. Leave (0,0,0) for automatic position + + + + The justification of the text + The justification of the text + + + + The number of decimals to use for calculated texts + The number of decimals to use for calculated texts + + + + Show the unit suffix + Show the unit suffix + + + + A description of the standard profile this element is based upon + A description of the standard profile this element is based upon + + + + Sill height + Sill height + + + + CutVolume + CutVolume + + + + CutPlane + CutPlane + + + + PreviewCutVolume + PreviewCutVolume + + + + Cut Plane + Cut Plane + + + + Cut Plane options + Cut Plane options + + + + Wich side to cut + Wich side to cut + + + + Behind + Behind + + + + Front + Спереди + + + + Crossing point not found in profile. + + Crossing point not found in profile. + + + + + A list of angles for each roof pane + A list of angles for each roof pane + + + + A list of horizontal length projections for each roof pane + A list of horizontal length projections for each roof pane + + + + A list of IDs of relative profiles for each roof pane + A list of IDs of relative profiles for each roof pane + + + + A list of thicknesses for each roof pane + A list of thicknesses for each roof pane + + + + A list of overhangs for each roof pane + A list of overhangs for each roof pane + + + + A list of calculated heights for each roof pane + A list of calculated heights for each roof pane + + + + Angle (deg) + Угол (градусы) + + + + Run (mm) + Run (mm) + + + + Thickness (mm) + Толщина (мм) + + + + Overhang (mm) + Свес кровли (мм) + + + + Height (mm) + Высота (мм) + + + + Arch_3Views + + + 3 views from mesh + 3 views from mesh + + + + Creates 3 views (top, front, side) from a mesh-based object + Creates 3 views (top, front, side) from a mesh-based object + Arch_Add - + Add component Добавить компонент - + Adds the selected components to the active object Добавить выбранные компоненты для активного объекта @@ -887,12 +1224,12 @@ Arch_Axis - + Axis Ось - + Creates an axis system. Создает систему осей. @@ -900,12 +1237,12 @@ Arch_Building - + Building Здание - + Creates a building object including selected objects. Создаёт объект здания, включая выбранные объекты. @@ -913,36 +1250,59 @@ Arch_Check - + Check Проверить - + Checks the selected objects for problems Проверка выбранных объектов - + Explore the contents of an Ifc file - Explore the contents of an Ifc file + Изучить содержимое файла Ifc Arch_CloseHoles - + Close holes Убрать отверстия - + Closes holes in open shapes, turning them solids Закрыть отверстия в открытых формах, преобразовав их в модель - Arch_Fixture + Arch_CutPlane + + + Cut with plane + Cut with plane + + + + Cut an object with a plane + Cut an object with a plane + + + + Arch_Equipment + + + Equipment + Equipment + + + + Creates an equipment object from a selected object (Part or Mesh) + Creates an equipment object from a selected object (Part or Mesh) + Arch_Floor @@ -960,72 +1320,85 @@ Arch_Frame - + Frame - Frame + каркас - + Creates a frame object from a planar 2D object and a profile - Creates a frame object from a planar 2D object and a profile + Создать объект каркаса из плоского 2D объекта и профиля Arch_IfcExplorer - + Ifc Explorer - Ifc Explorer + Исследователь Ifc Arch_MergeWalls - + Merge Walls - Merge Walls + Объединить стенки - + Merges the selected walls, if possible - Merges the selected walls, if possible + Объединяет выбранные стены, если это возможно Arch_MeshToShape - + Mesh to Shape Сетка для фигуры - + Turns selected meshes into Part Shape objects Обратить выбранные сети в части объектов - Arch_Rebar + Arch_Panel - - Rebar - Rebar + + Panel + Panel - + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + + + + Arch_Rebar + + + Rebar + Армирование + + + Creates a Reinforcement bar from the selected face of a structural object - Creates a Reinforcement bar from the selected face of a structural object + Создать объект арматуры из выбранной грани структурного объекта Arch_Remove - + Remove component Удалить компонент - + Remove the selected components from their parents, or create a hole in a component Удалить выбранные компоненты из их родителей, или создать отверстие в компоненте @@ -1033,12 +1406,12 @@ Arch_RemoveShape - + Remove Shape from Arch Удалить форму из Архитектуры - + Removes cubic shapes from Arch components Удаляет кубические формы из компонентов Архитектуры @@ -1046,25 +1419,25 @@ Arch_Roof - + Roof Крыша - - Creates a roof object from the selected face of an object - Создать объект крыша на выбранных поверхностях объекта + + Creates a roof object from the selected wire. + Creates a roof object from the selected wire. Arch_SectionPlane - + Section Plane Плоскость сечения - + Creates a section plane object, including the selected objects Создать планировку объекта, включая выбранные объекты @@ -1072,12 +1445,12 @@ Arch_SelectNonSolidMeshes - + Select non-manifold meshes Выбрать не-разнородные сетки - + Selects all non-manifold meshes from the document or from the selected groups Выбрать все не-разнородные сетки из документа или из выбранных групп @@ -1085,12 +1458,12 @@ Arch_Site - + Site Место - + Creates a site object including selected objects. Создать объект Место, включая выбранные объекты @@ -1098,17 +1471,17 @@ Arch_Space - + Space - Space + Пространство - + Creates a space object from selected boundary objects Creates a space object from selected boundary objects - + Creates a stairs object Creates a stairs object @@ -1116,12 +1489,12 @@ Arch_SplitMesh - + Split Mesh Разделить сетку - + Splits selected meshes into independent components Разделить выбранные сетки на независимые компоненты @@ -1129,7 +1502,7 @@ Arch_Stairs - + Stairs Лестницы @@ -1137,12 +1510,12 @@ Arch_Structure - + Structure Структура - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Создать структуру объекта с нуля, либо из выбранного объекта (эскиза, провода, поверхности или тела) @@ -1150,25 +1523,38 @@ Arch_Survey - + Survey - Survey + Опрос/анкетирование - + Starts survey - Starts survey + Начинается опрос + + + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Toggle IFC Brep flag + + + + Force an object to be exported as Brep or not + Force an object to be exported as Brep or not Arch_Wall - + Wall Стена - + Creates a wall object from scratch or from a selected object (wire, face or solid) Создать объект Стена из меток или из выбранного объекта (каркас, поверхность или объекта модели) @@ -1176,12 +1562,12 @@ Arch_Window - + Window Окно - + Creates a window object from a selected object (wire, rectangle or sketch) Создаёт окно объектов из выбранных объектов (связь, прямоугольник или эскиз) @@ -1208,16 +1594,6 @@ IFC import Импорт IFC - - - Creates groups for each Arch object type - Создает группы для каждого объекта типа арка - - - - Group components by types - Группировать компоненты по типам - 2D rendering @@ -1244,29 +1620,29 @@ Определяет величину видимой толщины линии подлежащей обрезке - + Width: Ширина: - + Height: Высота: - + Color: - Color: + Цвет: - + Length: Длина: Diameter - Diameter + Диаметр @@ -1276,37 +1652,37 @@ The default width for new windows - The default width for new windows + Ширина по умолчанию для новых окон The default height for new windows - The default height for new windows + Высота по умолчанию для новых окон Thickness: - Thickness: + Толщина: The default thickness for new windows - The default thickness for new windows + Толщина по умолчанию для новых окон Frame color: - Frame color: + Цвет каркаса: Glass color: - Glass color: + Цвет оптики: Snapping - Snapping + Привязка @@ -1341,7 +1717,7 @@ Fast conversion - Fast conversion + Быстрое преобразование @@ -1373,11 +1749,6 @@ Cut method Cut method - - - Import / export - Import / export - Check this to display debug messages while importing IFC files @@ -1390,74 +1761,44 @@ - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - - - - Force python parser - Force python parser - - - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - + Separate openings Separate openings - + If this is checked, object names will be prefixed with the IFC ID number If this is checked, object names will be prefixed with the IFC ID number - + Prefix names with ID number Prefix names with ID number - + Exclude list: Exclude list: - + A comma-separated list of Ifc entities to exclude from import A comma-separated list of Ifc entities to exclude from import - - Custom IFC schema (internal parser only) - Custom IFC schema (internal parser only) - - - + IFC export - IFC export + Экспорт IFC - + Scaling factor Scaling factor - - - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - Как правило, IFC файлы используют миллиметры. Если вы работаете в другой системе исчисления, это позволит вам масштабировать все ваши значения в миллиметры. - - - - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - - - - Save a list of exported objects - Save a list of exported objects - Snap to baselines of Arch objects (override with CTRL) @@ -1471,12 +1812,12 @@ Walls - Walls + Стены - + mm - mm + мм @@ -1486,7 +1827,7 @@ Rebars - Rebars + Армирование @@ -1499,97 +1840,105 @@ Прозрачность: - - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - - - - Separate placements - Separate placements - - - - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - - - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. - - Force export as Breps - Force export as Breps - - - - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - - - - Join multi-solid objects - Join multi-solid objects - - - + Collada export Collada export - - WebGL export - WebGL export + + Hidden geomety pattern + Hidden geomety pattern - - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + This is the SVG stroke-dasharray property to apply to projections of hidden objects. - - Discretize wires - Discretize wires + + 30, 10 + 30, 10 + + + + Stairs + Лестницы + + + + Number of steps: + Number of steps: + + + + Panels + Панели + + + + mm + мм + + + + Thickness + Толщина + + + + IFC / DAE / WebGL + IFC / DAE / WebGL + + + + Force export as Brep + Принудительно экспортировать как Brep + + + + Workbench + + + Arch tools + Архитектурные инструменты + + + + Draft tools + Инструменты черчения + + + + Draft mod tools + Draft mod tools arch - - Arch tools - Инструменты Архитектуры - - - - Draft tools - Инструменты Проектов - - - - Draft mod tools - Инструменты режима Черновик - - - + &Architecture &Архитектура - + &Draft &Черчение - + Utilities Utilities - + Snapping - Snapping + Привязка diff --git a/src/Mod/Arch/Resources/translations/Arch_sr.qm b/src/Mod/Arch/Resources/translations/Arch_sr.qm new file mode 100644 index 0000000000..e2b2dd4a4f Binary files /dev/null and b/src/Mod/Arch/Resources/translations/Arch_sr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sr.ts b/src/Mod/Arch/Resources/translations/Arch_sr.ts new file mode 100644 index 0000000000..738395d381 --- /dev/null +++ b/src/Mod/Arch/Resources/translations/Arch_sr.ts @@ -0,0 +1,1946 @@ + + + + + Arch + + + Components + Компоненте + + + + Components of this object + Компоненте овог објекта + + + + Axes + Осе + + + + Create Axis + Креирај осу + + + + The intervals between axes + Интервали између оса + + + + The angles of each axis + Углови сваке осе + + + + The length of the axes + Дужина оса + + + + The size of the axis bubbles + Величина мехурића на оси + + + + Remove + Obriši + + + + Add + Додај + + + + Axis + Оса + + + + Distance + Distance + + + + Angle + Угао + + + + Type conversion + Промена типа + + + + Create Building + Креирај грађевину + + + + Floor + Спрат + + + + removing sketch support to avoid cross-referencing + уклањање подршке за скицу због укрштања + + + + is not closed + није затворен + + + + is not valid + није важећи + + + + doesn't contain any solid + не садржи ниједно чврсто тело + + + + contains a non-closed solid + Ограничи отворено чврcто тело + + + + contains faces that are not part of any solid + садржи површине које нису део ниједног тела + + + + Grouping + Груписање + + + + Ungrouping + Разгруписавање + + + + Split Mesh + Split Mesh + + + + Mesh to Shape + Mesh to Shape + + + + All good! no problems found + Све је у реду! нема пронађених проблема + + + + Base component + Темељна компонента + + + + Additions + Додаци + + + + Subtractions + Одузимања + + + + Objects + Предмети + + + + closing Sketch edit + затварање измене Скице + + + + The height of this floor + Висина овог пода + + + + Roof + Кров + + + + Create Roof + Направи Кров + + + + Unable to create a roof + Није могуће направити кров + + + + The face number of the base object used to build this roof + Број површи базног објекта који је коришћен за израду овог крова + + + + Page + Страна + + + + View of + Поглед на + + + + Create Section Plane + Направи деобну раван + + + + The objects that must be considered by this section plane. Empty means all document + Објекти који морају бити обухваћени овом деобном равни. Празно значи цео документ + + + + Skipping invalid object: + Преcкакање неважећег објекта: + + + + Create Site + Направи Локацију + + + + Create Structure + Направи структуру + + + + The length of this element, if not based on a profile + Дужина овог елемента ,ако cе не заcнива на профилу + + + + The width of this element, if not based on a profile + Ширина овог елемента, ако cе не заcнива на профилу + + + + The height or extrusion depth of this element. Keep 0 for automatic + The height or extrusion depth of this element. Keep 0 for automatic + + + + Axes systems this structure is built on + Оcни cиcтем на коме је ова cтруктура изграђена + + + + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) + + + + The element numbers to exclude when this structure is based on axes + The element numbers to exclude when this structure is based on axes + + + + Create Wall + Направи зид + + + + WallTrace + Путања зида + + + + Wall options + Опције зида + + + + Width + Ширина + + + + Height + Висина + + + + Alignment + Поравнавање + + + + The width of this wall. Not used if this wall is based on a face + The width of this wall. Not used if this wall is based on a face + + + + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid + Виcина овог зида. Задржи 0 за аутоматcки.Не кориcти cе ако је овај зид заcнован на чврcтом телу + + + + The alignment of this wall on its base object, if applicable + The alignment of this wall on its base object, if applicable + + + + Error: Invalid base object + Error: Invalid base object + + + + This mesh is an invalid solid + This mesh is an invalid solid + + + + Create Window + Креирај прозор + + + + the components of this window + Компоненте овог прозора + + + + Edit + Измени + + + + Create/update component + Креирај / Ажурирај компоненту + + + + Base 2D object + Base 2D object + + + + Wires + Жице + + + + Create new component + Направи нову компоненту + + + + Name + Име + + + + Type + Тип + + + + Thickness + Дебљина + + + + Z offset + Z offset + + + + Error: Couldn't determine character encoding + Error: Couldn't determine character encoding + + + + file %s successfully created. + %s датотека је успешно креирана. + + + + Error: Couldn't determine character encoding + + Error: Couldn't determine character encoding + + + + + Couldn't locate IfcOpenShell + + Couldn't locate IfcOpenShell + + + + + IFC Schema not found, IFC import disabled. + + IFC Schema not found, IFC import disabled. + + + + + successfully written + уcпешно упиcано + + + + The numbering style + The numbering style + + + + removing sketch external references to avoid cross-referencing + removing sketch external references to avoid cross-referencing + + + + Add space boundary + Add space boundary + + + + Remove space boundary + Remove space boundary + + + + Please select a base object + Please select a base object + + + + Fixtures + Fixtures + + + + Armatures + Арматуре + + + + The placement of this group + The placement of this group + + + + Frame + Рам + + + + Create Frame + Направи Рам + + + + Create Rebar + Направи Арматуру + + + + Please select a base face on a structural object + + Молим одаберите оcновну површ на cтруктурном објекту + + + + Please select a base object + + Молим одаберите оcновни објекат + + + + The placement of this object + Положај овог објекта + + + + The terrain of this site + The terrain of this site + + + + The address of this site + The address of this site + + + + The geographic coordinates of this site + The geographic coordinates of this site + + + + An url that shows this site in a mapping website + An url that shows this site in a mapping website + + + + Create Space + Направи проcтор + + + + The objects that make the boundaries of this space object + The objects that make the boundaries of this space object + + + + Create Stairs + Направи степенице + + + + The length of these stairs, if no baseline is defined + The length of these stairs, if no baseline is defined + + + + The width of these stairs + Ширина ових степеница + + + + The total height of these stairs + The total height of these stairs + + + + The alignment of these stairs on their baseline, if applicable + The alignment of these stairs on their baseline, if applicable + + + + The number of risers in these stairs + The number of risers in these stairs + + + + The depth of the treads of these stairs + The depth of the treads of these stairs + + + + The height of the risers of these stairs + The height of the risers of these stairs + + + + The size of the nosing + The size of the nosing + + + + The thickness of the treads + The thickness of the treads + + + + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in + + + + The type of landings of these stairs + The type of landings of these stairs + + + + The type of winders in these stairs + The type of winders in these stairs + + + + The type of structure of these stairs + The type of structure of these stairs + + + + The thickness of the massive structure or of the stringers + The thickness of the massive structure or of the stringers + + + + The width of the stringers + The width of the stringers + + + + The offset between the border of the stairs and the structure + The offset between the border of the stairs and the structure + + + + Wood + Дрво + + + + Steel + Челик + + + + Structure options + Structure options + + + + Preset + Preset + + + + Length + Дужина + + + + Rotate + Ротирати + + + + Con&tinue + Con&tinue + + + + An optional extrusion path for this element + An optional extrusion path for this element + + + + Armatures contained in this element + Armatures contained in this element + + + + The structural nodes of this element + The structural nodes of this element + + + + Error: The base shape couldn't be extruded along this tool object + Error: The base shape couldn't be extruded along this tool object + + + + Couldn't compute a shape + Couldn't compute a shape + + + + Merge Wall + Merge Wall + + + + The selected wall contain no subwall to merge + The selected wall contain no subwall to merge + + + + Please select only wall objects + Молим одаберите cамо зидове + + + + Merge Walls + Cпоји Зидове + + + + The length of this wall. Not used if this wall is based on an underlying object + The length of this wall. Not used if this wall is based on an underlying object + + + + The face number of the base object used to build this wall + The face number of the base object used to build this wall + + + + The offset between this wall and its baseline (only for left and right alignments) + The offset between this wall and its baseline (only for left and right alignments) + + + + Pick a face on an existing object or select a preset + + Pick a face on an existing object or select a preset + + + + + Window options + Опције за прозоре + + + + The depth of the hole that this window makes in its host object. Keep 0 for automatic. + The depth of the hole that this window makes in its host object. Keep 0 for automatic. + + + + The width of this window (for preset windows only) + The width of this window (for preset windows only) + + + + The height of this window (for preset windows only) + The height of this window (for preset windows only) + + + + The normal direction of this window + The normal direction of this window + + + + Unable to create component + + Unable to create component + + + + + pycollada not found, collada support is disabled. + + pycollada not found, collada support is disabled. + + + + + IfcOpenShell not found or disabled, falling back on internal parser. + + IfcOpenShell not found or disabled, falling back on internal parser. + + + + + Distances (mm) and angles (deg) between axes + Distances (mm) and angles (deg) between axes + + + + Error computing the shape of this object + Error computing the shape of this object + + + + Create Structural System + Create Structural System + + + + Error: IfcOpenShell is not installed + + Error: IfcOpenShell is not installed + + + + + Error: your IfcOpenShell version is too old + + Error: your IfcOpenShell version is too old + + + + + Found a shape containing curves, triangulating + + Found a shape containing curves, triangulating + + + + + Invalid cutplane + + Invalid cutplane + + + + + No objects are cut by the plane + + No objects are cut by the plane + + + + + Object doesn't have settable IFC Attributes + Object doesn't have settable IFC Attributes + + + + Disabling Brep force flag of object + Disabling Brep force flag of object + + + + Enabling Brep force flag of object + Enabling Brep force flag of object + + + + The base object this component is built upon + The base object this component is built upon + + + + Other shapes that are appended to this object + Other shapes that are appended to this object + + + + Other shapes that are subtracted from this object + Other shapes that are subtracted from this object + + + + An optional description for this component + An optional description for this component + + + + An optional tag for this component + An optional tag for this component + + + + Custom IFC properties and attributes + Custom IFC properties and attributes + + + + A material for this object + A material for this object + + + + The role of this object + The role of this object + + + + Specifies if this object must move together when its host is moved + Specifies if this object must move together when its host is moved + + + + has no solid + has no solid + + + + has an invalid shape + has an invalid shape + + + + has a null shape + has a null shape + + + + Cutting + Cutting + + + + You must select a base object first! + You must select a base object first! + + + + Create Equipment + Create Equipment + + + + You must select exactly one base object + You must select exactly one base object + + + + The selected object must be a mesh + The selected object must be a mesh + + + + This mesh has more than 1000 facets. + This mesh has more than 1000 facets. + + + + This operation can take a long time. Proceed? + This operation can take a long time. Proceed? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + The mesh has more than 500 facets. This will take a couple of minutes... + + + + Create 3 views + Create 3 views + + + + an optional 2D shape representing a top view of this equipment + an optional 2D shape representing a top view of this equipment + + + + an optional 2D shape representing a front view of this equipment + an optional 2D shape representing a front view of this equipment + + + + an optional 2D shape representing a side view of this equipment + an optional 2D shape representing a side view of this equipment + + + + The model description of this equipment + The model description of this equipment + + + + The url of the product page of this equipment + The url of the product page of this equipment + + + + Create Panel + Направи Панел + + + + Panel options + Панел опције + + + + The thickness or extrusion depth of this element + The thickness or extrusion depth of this element + + + + The number of sheets to use + The number of sheets to use + + + + The offset between this panel and its baseline + The offset between this panel and its baseline + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + + + + Id + Id + + + + IdRel + IdRel + + + + If false, non-solids will be cut too, with possible wrong results. + If false, non-solids will be cut too, with possible wrong results. + + + + The display length of this section plane + The display length of this section plane + + + + The display height of this section plane + The display height of this section plane + + + + The size of the arrows of this section plane + The size of the arrows of this section plane + + + + The computed floor area of this space + The computed floor area of this space + + + + The finishing of the floor of this space + The finishing of the floor of this space + + + + The finishing of the walls of this space + The finishing of the walls of this space + + + + The finishing of the ceiling of this space + The finishing of the ceiling of this space + + + + Objects that are included inside this space, such as furniture + Objects that are included inside this space, such as furniture + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + + + + The name of the font + The name of the font + + + + The color of the area text + The color of the area text + + + + The size of the text font + The size of the text font + + + + The size of the first line of text + The size of the first line of text + + + + The space between the lines of text + The space between the lines of text + + + + The position of the text. Leave (0,0,0) for automatic position + The position of the text. Leave (0,0,0) for automatic position + + + + The justification of the text + The justification of the text + + + + The number of decimals to use for calculated texts + The number of decimals to use for calculated texts + + + + Show the unit suffix + Show the unit suffix + + + + A description of the standard profile this element is based upon + A description of the standard profile this element is based upon + + + + Sill height + Sill height + + + + CutVolume + CutVolume + + + + CutPlane + CutPlane + + + + PreviewCutVolume + PreviewCutVolume + + + + Cut Plane + Cut Plane + + + + Cut Plane options + Cut Plane options + + + + Wich side to cut + Wich side to cut + + + + Behind + Behind + + + + Front + Front + + + + Crossing point not found in profile. + + Crossing point not found in profile. + + + + + A list of angles for each roof pane + A list of angles for each roof pane + + + + A list of horizontal length projections for each roof pane + A list of horizontal length projections for each roof pane + + + + A list of IDs of relative profiles for each roof pane + A list of IDs of relative profiles for each roof pane + + + + A list of thicknesses for each roof pane + A list of thicknesses for each roof pane + + + + A list of overhangs for each roof pane + A list of overhangs for each roof pane + + + + A list of calculated heights for each roof pane + A list of calculated heights for each roof pane + + + + Angle (deg) + Angle (deg) + + + + Run (mm) + Run (mm) + + + + Thickness (mm) + Thickness (mm) + + + + Overhang (mm) + Overhang (mm) + + + + Height (mm) + Height (mm) + + + + Arch_3Views + + + 3 views from mesh + 3 views from mesh + + + + Creates 3 views (top, front, side) from a mesh-based object + Creates 3 views (top, front, side) from a mesh-based object + + + + Arch_Add + + + Add component + Додај компоненту + + + + Adds the selected components to the active object + Додаје одабране компоненте активном објекту + + + + Arch_Axis + + + Axis + Оса + + + + Creates an axis system. + Creates an axis system. + + + + Arch_Building + + + Building + Building + + + + Creates a building object including selected objects. + Creates a building object including selected objects. + + + + Arch_Check + + + Check + Провери + + + + Checks the selected objects for problems + Проверава да ли има проблема на одабраним објектима + + + + Explore the contents of an Ifc file + Иcтражи cадржај Ifc датотеке + + + + Arch_CloseHoles + + + Close holes + Затвори рупе + + + + Closes holes in open shapes, turning them solids + Затвара рупе у отвореним објектима,претварајући их у чврcта тела + + + + Arch_CutPlane + + + Cut with plane + Cut with plane + + + + Cut an object with a plane + Cut an object with a plane + + + + Arch_Equipment + + + Equipment + Опрема + + + + Creates an equipment object from a selected object (Part or Mesh) + Creates an equipment object from a selected object (Part or Mesh) + + + + Arch_Floor + + + Floor + Спрат + + + + Creates a floor object including selected objects + Creates a floor object including selected objects + + + + Arch_Frame + + + Frame + Рам + + + + Creates a frame object from a planar 2D object and a profile + Creates a frame object from a planar 2D object and a profile + + + + Arch_IfcExplorer + + + Ifc Explorer + Ifc Иcтраживач + + + + Arch_MergeWalls + + + Merge Walls + Cпоји Зидове + + + + Merges the selected walls, if possible + Merges the selected walls, if possible + + + + Arch_MeshToShape + + + Mesh to Shape + Mesh to Shape + + + + Turns selected meshes into Part Shape objects + Turns selected meshes into Part Shape objects + + + + Arch_Panel + + + Panel + Panel + + + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + + + + Arch_Rebar + + + Rebar + Rebar + + + + Creates a Reinforcement bar from the selected face of a structural object + Creates a Reinforcement bar from the selected face of a structural object + + + + Arch_Remove + + + Remove component + Уклони компоненту + + + + Remove the selected components from their parents, or create a hole in a component + Remove the selected components from their parents, or create a hole in a component + + + + Arch_RemoveShape + + + Remove Shape from Arch + Remove Shape from Arch + + + + Removes cubic shapes from Arch components + Removes cubic shapes from Arch components + + + + Arch_Roof + + + Roof + Кров + + + + Creates a roof object from the selected wire. + Creates a roof object from the selected wire. + + + + Arch_SectionPlane + + + Section Plane + Section Plane + + + + Creates a section plane object, including the selected objects + Creates a section plane object, including the selected objects + + + + Arch_SelectNonSolidMeshes + + + Select non-manifold meshes + Select non-manifold meshes + + + + Selects all non-manifold meshes from the document or from the selected groups + Selects all non-manifold meshes from the document or from the selected groups + + + + Arch_Site + + + Site + Site + + + + Creates a site object including selected objects. + Creates a site object including selected objects. + + + + Arch_Space + + + Space + Проcтор + + + + Creates a space object from selected boundary objects + Creates a space object from selected boundary objects + + + + Creates a stairs object + Creates a stairs object + + + + Arch_SplitMesh + + + Split Mesh + Split Mesh + + + + Splits selected meshes into independent components + Splits selected meshes into independent components + + + + Arch_Stairs + + + Stairs + Степенице + + + + Arch_Structure + + + Structure + Конструкција + + + + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) + Прави конструкцију објекта од почетка или од одабраног објекта (цртежа, жице, површине или тела) + + + + Arch_Survey + + + Survey + Survey + + + + Starts survey + Starts survey + + + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Toggle IFC Brep flag + + + + Force an object to be exported as Brep or not + Force an object to be exported as Brep or not + + + + Arch_Wall + + + Wall + Зид + + + + Creates a wall object from scratch or from a selected object (wire, face or solid) + Прави зид објекта од почетка или од одабраног објекта (жице, површине или тела) + + + + Arch_Window + + + Window + Window + + + + Creates a window object from a selected object (wire, rectangle or sketch) + Прави прозор објекта од почетка или од одабраног објекта (жице, ректангла или цртежа) + + + + Gui::Dialog::DlgSettingsArch + + + General settings + Општа подешавања + + + + This is the default color for new Wall objects + Ово је подразумевана боја за нове објекте зида + + + + This is the default color for new Structure objects + Ово је подразумевана боја за нове објекте конструкције + + + + IFC import + 'IFC' увоз + + + + 2D rendering + 2D rendering + + + + Show debug information during 2D rendering + Show debug information during 2D rendering + + + + Show renderer debug messages + Show renderer debug messages + + + + Cut areas line thickness ratio + Cut areas line thickness ratio + + + + Specifies how many times the viewed line thickness must be applied to cut lines + Specifies how many times the viewed line thickness must be applied to cut lines + + + + Width: + Ширина: + + + + Height: + Висина: + + + + Color: + Боја: + + + + Length: + Дужина: + + + + Diameter + Пречник + + + + Offset + Померај + + + + The default width for new windows + The default width for new windows + + + + The default height for new windows + The default height for new windows + + + + Thickness: + Дебљина: + + + + The default thickness for new windows + The default thickness for new windows + + + + Frame color: + Frame color: + + + + Glass color: + Боја стакла: + + + + Snapping + Snapping + + + + Walls drawing + Walls drawing + + + + Auto-join walls + Auto-join walls + + + + If this is checked, when 2 similar walls are being connected, their underlying sketches will be joined into one, and the two walls will become one + If this is checked, when 2 similar walls are being connected, their underlying sketches will be joined into one, and the two walls will become one + + + + Join walls base sketches when possible + Join walls base sketches when possible + + + + Mesh to Shape Conversion + Mesh to Shape Conversion + + + + If this is checked, conversion is faster but the result might still contain triangulated faces + If this is checked, conversion is faster but the result might still contain triangulated faces + + + + Fast conversion + Брза конверзија + + + + Tolerance: + Tolerance: + + + + Tolerance value to use when checking if 2 adjacent faces as planar + Tolerance value to use when checking if 2 adjacent faces as planar + + + + If this is checked, flat groups of faces will be force-flattened, resulting in possible gaps and non-solid results + If this is checked, flat groups of faces will be force-flattened, resulting in possible gaps and non-solid results + + + + Force flat faces + Force flat faces + + + + If this is checked, holes in faces will be performed by subtraction rather than using wires orientation + If this is checked, holes in faces will be performed by subtraction rather than using wires orientation + + + + Cut method + Cut method + + + + Check this to display debug messages while importing IFC files + Check this to display debug messages while importing IFC files + + + + Show debug messages + Show debug messages + + + + If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted + If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted + + + + Separate openings + Separate openings + + + + If this is checked, object names will be prefixed with the IFC ID number + If this is checked, object names will be prefixed with the IFC ID number + + + + Prefix names with ID number + Prefix names with ID number + + + + Exclude list: + Exclude list: + + + + A comma-separated list of Ifc entities to exclude from import + A comma-separated list of Ifc entities to exclude from import + + + + IFC export + IFC export + + + + Scaling factor + Scaling factor + + + + Snap to baselines of Arch objects (override with CTRL) + Snap to baselines of Arch objects (override with CTRL) + + + + Defaults + Подразумевано + + + + Walls + Зидови + + + + mm + mm + + + + Structures + Структуре + + + + Rebars + Арматуре + + + + Windows + Прозори + + + + Transparency: + Prozirnost: + + + + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. + + + + Collada export + Collada export + + + + Hidden geomety pattern + Hidden geomety pattern + + + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + + + + 30, 10 + 30, 10 + + + + Stairs + Степенице + + + + Number of steps: + Број облика: + + + + Panels + Панели + + + + mm + мм + + + + Thickness + Дебљина + + + + IFC / DAE / WebGL + IFC / DAE / WebGL + + + + Force export as Brep + Force export as Brep + + + + Workbench + + + Arch tools + Arch tools + + + + Draft tools + Draft tools + + + + Draft mod tools + Draft mod tools + + + + arch + + + &Architecture + &Архитектура + + + + &Draft + &Нацрт + + + + Utilities + Utilities + + + + Snapping + Snapping + + + diff --git a/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm b/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm index 4b832fb146..1e391b15fb 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm and b/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts b/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts index da9828f172..f2484ace00 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts @@ -4,407 +4,362 @@ Arch - + Components Komponenter - + Components of this object Komponenter i det här objektet - + Axes Axlar - + Create Axis Skapa axel - + The intervals between axes Intervallet mellan axlarna - + The angles of each axis Vinklarna på varje axel - + The length of the axes Längden på axlarna - + The size of the axis bubbles Storleken på axel-bubblorna - + Remove Ta bort - + Add Lägg till - + Axis Axel - + Distance Distans - + Angle Vinkel - - Building - Byggnad - - - + Type conversion Typkonvertering - + Create Building Skapa byggnad - + Floor Golv - + removing sketch support to avoid cross-referencing ta bort skiss stöd för att undvika korsreferenser - - No objects are cut by the plane - Inga objekt skärs av planet - - - + is not closed är inte stängd - + is not valid är inte giltig - + doesn't contain any solid innehåller inte någon solid - + contains a non-closed solid Innehåller en osluten solid - + contains faces that are not part of any solid Innehåller ytor som inte är en del av någon solid - + Grouping Gruppering - + Ungrouping Dela upp - + Split Mesh Splitta nät - + Mesh to Shape Nät till form - + All good! no problems found Allt bra! inga problem hittades - + Base component Baskomponent - + Additions Additioner - + Subtractions Subtraktioner - + Objects Objekt - + closing Sketch edit Stänger Skiss redigering - + The height of this floor Höjden på denna våningen - + Roof Tak - + Create Roof Skapa tak - + Unable to create a roof Det gick inte att skapa ett tak - - The angle of this roof - Vinkeln på detta tak - - - + The face number of the base object used to build this roof Ytantalet på det basobjekt som användes för att skapa detta tak - + Page Sida - + View of Vy över - + Create Section Plane Skapa snittplan - + The objects that must be considered by this section plane. Empty means all document De objekt som måste beaktas av detta snittplan. Tom innebär hela dokumentet - - The display size of this section plane - Visningsstorleken på detta snittplan - - - - No shape has been computed yet, select wireframe rendering and render again - Ingen form har beräknats ännu, välj trådramsrendering och rendera igen - - - + Skipping invalid object: Hoppar över ogiltigt objekt: - - Site - Plats - - - + Create Site Skapa plats - - Structure - Struktur - - - + Create Structure Skapa struktur - + The length of this element, if not based on a profile Längden på detta element, om det inte baserats på en profil - + The width of this element, if not based on a profile Bredden på detta element, om det inte baserats på en profil - + The height or extrusion depth of this element. Keep 0 for automatic Höjd eller extruderingsdjup på detta element. Behåll 0 för automatik - + Axes systems this structure is built on Axelsystem som denna struktur är byggd på - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) Den normala extrusionsriktningen på detta objekt (Behåll (0,0,0) för automatisk normal) - + The element numbers to exclude when this structure is based on axes De elementnummer som ska uteslutas när denna struktur är baserad på axlar - - Wall - Vägg - - - + Create Wall Skapa vägg - + WallTrace WallTrace - + Wall options Alternativ för vägg - + Width Bredd - + Height Höjd - + Alignment Justering - + The width of this wall. Not used if this wall is based on a face Bredden på denna vägg. Används inte om denna vägg är baserad på en yta - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Höjden på denna vägg. Behåll 0 för automatisk beräkning. Används inte om denna vägg är baserad på en solid - + The alignment of this wall on its base object, if applicable Anpassning av denna vägg på dess bas objekt, om tillämpligt - + Error: Invalid base object Fel: Ogiltigt basobjekt - + This mesh is an invalid solid Detta nät är en ogiltig solid - - Window - Fönster - - - + Create Window Skapa fönster - + the components of this window Det här fönstrets komponenter - + Edit Redigera - + Create/update component Skapa eller uppdatera komponent - + Base 2D object 2D basobjekt - + Wires Trådar - + Create new component Skapa ny komponent - + Name Namn - + Type Typ - + Thickness Tjocklek - + Z offset Z offset @@ -419,397 +374,352 @@ filen %s har skapats. - + Error: Couldn't determine character encoding Fel: Kunde inte avgöra teckenkodning - + Couldn't locate IfcOpenShell Kunde inte hitta IfcOpenShell - + IFC Schema not found, IFC import disabled. IFC-schemat kunde inte hittas, IFC import avstängd. - + successfully written framgångsrikt skriven - + The numbering style - The numbering style + Numreringsstilen - + removing sketch external references to avoid cross-referencing - removing sketch external references to avoid cross-referencing + tar bort externa skissreferenser för att undvika korsreferenser - - Invalid cutplane - Invalid cutplane - - - + Add space boundary - Add space boundary + Lägg till utrymmesgräns - + Remove space boundary - Remove space boundary + Ta bort utrymmesgräns - + Please select a base object - Please select a base object + Vänligen välj ett basobjekt - + Fixtures - Fixtures + Fixturer - + Armatures - Armatures + Armaturer - + The placement of this group - The placement of this group + Placeringen av denna grupp Frame - Frame + Ram - + Create Frame - Create Frame + Skapa ram - - Rebar - Rebar - - - + Create Rebar - Create Rebar + Skapa armeringsjärn - + Please select a base face on a structural object - Please select a base face on a structural object + Vänligen välj en basyta på ett strukturellt objekt - - - Please select a base object - - Please select a base object - - - - - Section - Sektionering - - - - The placement of this object - The placement of this object - - - - The terrain of this site - The terrain of this site - - - - The address of this site - The address of this site - - - - The geographic coordinates of this site - The geographic coordinates of this site - - - - An url that shows this site in a mapping website - An url that shows this site in a mapping website - - - - Space - Space - - - - Create Space - Create Space - - - - A base shape defining this space - A base shape defining this space - + Please select a base object + + Vänligen välj basobjekt + + + + + The placement of this object + Placeringen av detta objekt + + + + The terrain of this site + Terrängen för denna plats + + + + The address of this site + Adressen för denna plats + + + + The geographic coordinates of this site + De geografiska koordinaterna för denna plats + + + + An url that shows this site in a mapping website + En url som visar denna plats på en webbkarta + + + + Create Space + Skapa utrymme + + + The objects that make the boundaries of this space object - The objects that make the boundaries of this space object + Objekten som utgör gränserna för detta utrymmesobjekt - - Stairs - Stairs - - - + Create Stairs - Create Stairs + Skapa trappor - + The length of these stairs, if no baseline is defined - The length of these stairs, if no baseline is defined + Längden av dessa trappor, om ingen ursprungslinje är deffinierad - + The width of these stairs - The width of these stairs + Bredden för dessa trappor - + The total height of these stairs - The total height of these stairs + Totalhöjden för dessa trappor - + The alignment of these stairs on their baseline, if applicable The alignment of these stairs on their baseline, if applicable - + The number of risers in these stairs - The number of risers in these stairs + Antalet steg i dessa trappor - + The depth of the treads of these stairs - The depth of the treads of these stairs + Djupet på stegen för dessa trappor - + The height of the risers of these stairs - The height of the risers of these stairs + Höjden på stegen för dessa trappor - + The size of the nosing The size of the nosing - + The thickness of the treads - The thickness of the treads + Tjockleken på stegen - + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in - + The type of landings of these stairs The type of landings of these stairs - + The type of winders in these stairs The type of winders in these stairs - + The type of structure of these stairs The type of structure of these stairs - + The thickness of the massive structure or of the stringers The thickness of the massive structure or of the stringers - + The width of the stringers The width of the stringers - + The offset between the border of the stairs and the structure The offset between the border of the stairs and the structure Wood - Wood + Trä Steel - Steel + Stål - + Structure options - Structure options + Strukturalternativ - + Preset - Preset + Förval - + Length Längd - + Rotate Rotera - + Con&tinue Con&tinue - + An optional extrusion path for this element An optional extrusion path for this element - + Armatures contained in this element - Armatures contained in this element + Armaturer inneslutna i detta element - - The role of this structural element - The role of this structural element - - - + The structural nodes of this element The structural nodes of this element - + Error: The base shape couldn't be extruded along this tool object Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape Couldn't compute a shape - + Merge Wall - Merge Wall + Sammanfoga vägg - + The selected wall contain no subwall to merge The selected wall contain no subwall to merge - + Please select only wall objects Please select only wall objects - + Merge Walls - Merge Walls + Sammanfoga väggar - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) - + Pick a face on an existing object or select a preset Pick a face on an existing object or select a preset - + Window options Window options - + The depth of the hole that this window makes in its host object. Keep 0 for automatic. The depth of the hole that this window makes in its host object. Keep 0 for automatic. - - an optional volume to be subtracted from hosts of this window - an optional volume to be subtracted from hosts of this window - - - + The width of this window (for preset windows only) The width of this window (for preset windows only) - + The height of this window (for preset windows only) The height of this window (for preset windows only) - + The normal direction of this window The normal direction of this window - - The role of this window - The role of this window - - - + Unable to create component - Unable to create component + Kan ej skapa komponent @@ -820,46 +730,36 @@ - + IfcOpenShell not found or disabled, falling back on internal parser. IfcOpenShell not found or disabled, falling back on internal parser. - + Distances (mm) and angles (deg) between axes - Distances (mm) and angles (deg) between axes + Avstånd (mm) och vinklar (grader) mellan axlar - + Error computing the shape of this object - Error computing the shape of this object + Fel vid beräkning av formen på detta objekt - - StructuralSystem - StructuralSystem - - - + Create Structural System Create Structural System - - The role of this wall - The role of this wall - - - + Error: IfcOpenShell is not installed Error: IfcOpenShell is not installed - + Error: your IfcOpenShell version is too old Error: your IfcOpenShell version is too old @@ -872,16 +772,455 @@ Found a shape containing curves, triangulating + + + Invalid cutplane + + Invalid cutplane + + + + + No objects are cut by the plane + + No objects are cut by the plane + + + + + Object doesn't have settable IFC Attributes + Object doesn't have settable IFC Attributes + + + + Disabling Brep force flag of object + Disabling Brep force flag of object + + + + Enabling Brep force flag of object + Enabling Brep force flag of object + + + + The base object this component is built upon + The base object this component is built upon + + + + Other shapes that are appended to this object + Other shapes that are appended to this object + + + + Other shapes that are subtracted from this object + Other shapes that are subtracted from this object + + + + An optional description for this component + An optional description for this component + + + + An optional tag for this component + An optional tag for this component + + + + Custom IFC properties and attributes + Custom IFC properties and attributes + + + + A material for this object + A material for this object + + + + The role of this object + The role of this object + + + + Specifies if this object must move together when its host is moved + Specifies if this object must move together when its host is moved + + + + has no solid + has no solid + + + + has an invalid shape + has an invalid shape + + + + has a null shape + has a null shape + + + + Cutting + Cutting + + + + You must select a base object first! + You must select a base object first! + + + + Create Equipment + Create Equipment + + + + You must select exactly one base object + You must select exactly one base object + + + + The selected object must be a mesh + The selected object must be a mesh + + + + This mesh has more than 1000 facets. + This mesh has more than 1000 facets. + + + + This operation can take a long time. Proceed? + This operation can take a long time. Proceed? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + The mesh has more than 500 facets. This will take a couple of minutes... + + + + Create 3 views + Create 3 views + + + + an optional 2D shape representing a top view of this equipment + an optional 2D shape representing a top view of this equipment + + + + an optional 2D shape representing a front view of this equipment + an optional 2D shape representing a front view of this equipment + + + + an optional 2D shape representing a side view of this equipment + an optional 2D shape representing a side view of this equipment + + + + The model description of this equipment + The model description of this equipment + + + + The url of the product page of this equipment + The url of the product page of this equipment + + + + Create Panel + Create Panel + + + + Panel options + Panel options + + + + The thickness or extrusion depth of this element + The thickness or extrusion depth of this element + + + + The number of sheets to use + The number of sheets to use + + + + The offset between this panel and its baseline + The offset between this panel and its baseline + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + + + + Id + Id + + + + IdRel + IdRel + + + + If false, non-solids will be cut too, with possible wrong results. + If false, non-solids will be cut too, with possible wrong results. + + + + The display length of this section plane + The display length of this section plane + + + + The display height of this section plane + The display height of this section plane + + + + The size of the arrows of this section plane + The size of the arrows of this section plane + + + + The computed floor area of this space + The computed floor area of this space + + + + The finishing of the floor of this space + The finishing of the floor of this space + + + + The finishing of the walls of this space + The finishing of the walls of this space + + + + The finishing of the ceiling of this space + The finishing of the ceiling of this space + + + + Objects that are included inside this space, such as furniture + Objects that are included inside this space, such as furniture + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + + + + The name of the font + The name of the font + + + + The color of the area text + The color of the area text + + + + The size of the text font + The size of the text font + + + + The size of the first line of text + The size of the first line of text + + + + The space between the lines of text + The space between the lines of text + + + + The position of the text. Leave (0,0,0) for automatic position + The position of the text. Leave (0,0,0) for automatic position + + + + The justification of the text + The justification of the text + + + + The number of decimals to use for calculated texts + The number of decimals to use for calculated texts + + + + Show the unit suffix + Show the unit suffix + + + + A description of the standard profile this element is based upon + A description of the standard profile this element is based upon + + + + Sill height + Sill height + + + + CutVolume + CutVolume + + + + CutPlane + CutPlane + + + + PreviewCutVolume + PreviewCutVolume + + + + Cut Plane + Cut Plane + + + + Cut Plane options + Cut Plane options + + + + Wich side to cut + Wich side to cut + + + + Behind + Behind + + + + Front + Front + + + + Crossing point not found in profile. + + Crossing point not found in profile. + + + + + A list of angles for each roof pane + A list of angles for each roof pane + + + + A list of horizontal length projections for each roof pane + A list of horizontal length projections for each roof pane + + + + A list of IDs of relative profiles for each roof pane + A list of IDs of relative profiles for each roof pane + + + + A list of thicknesses for each roof pane + A list of thicknesses for each roof pane + + + + A list of overhangs for each roof pane + A list of overhangs for each roof pane + + + + A list of calculated heights for each roof pane + A list of calculated heights for each roof pane + + + + Angle (deg) + Angle (deg) + + + + Run (mm) + Run (mm) + + + + Thickness (mm) + Thickness (mm) + + + + Overhang (mm) + Overhang (mm) + + + + Height (mm) + Height (mm) + + + + Arch_3Views + + + 3 views from mesh + 3 views from mesh + + + + Creates 3 views (top, front, side) from a mesh-based object + Creates 3 views (top, front, side) from a mesh-based object + Arch_Add - + Add component Lägg till komponent - + Adds the selected components to the active object Lägger till de valda komponenterna till det aktiva objektet @@ -889,12 +1228,12 @@ Arch_Axis - + Axis Axel - + Creates an axis system. Skapar ett axelsystem. @@ -902,12 +1241,12 @@ Arch_Building - + Building Byggnad - + Creates a building object including selected objects. Skapar ett byggnadsobjekt inkluderande valda objekt. @@ -915,17 +1254,17 @@ Arch_Check - + Check Kontrollera - + Checks the selected objects for problems Kontrollerar de markerade objekten efter problem - + Explore the contents of an Ifc file Explore the contents of an Ifc file @@ -933,18 +1272,41 @@ Arch_CloseHoles - + Close holes Stäng hål - + Closes holes in open shapes, turning them solids Stänger hål i öppna former, och omvandlar dem dem till solider - Arch_Fixture + Arch_CutPlane + + + Cut with plane + Cut with plane + + + + Cut an object with a plane + Cut an object with a plane + + + + Arch_Equipment + + + Equipment + Equipment + + + + Creates an equipment object from a selected object (Part or Mesh) + Creates an equipment object from a selected object (Part or Mesh) + Arch_Floor @@ -962,12 +1324,12 @@ Arch_Frame - + Frame - Frame + Ram - + Creates a frame object from a planar 2D object and a profile Creates a frame object from a planar 2D object and a profile @@ -975,7 +1337,7 @@ Arch_IfcExplorer - + Ifc Explorer Ifc Explorer @@ -983,12 +1345,12 @@ Arch_MergeWalls - + Merge Walls - Merge Walls + Sammanfoga väggar - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -996,25 +1358,38 @@ Arch_MeshToShape - + Mesh to Shape Nät till form - + Turns selected meshes into Part Shape objects Omvandlar valda nät till del form-objekt - Arch_Rebar + Arch_Panel - - Rebar - Rebar + + Panel + Panel - + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + + + + Arch_Rebar + + + Rebar + Armeringsjärn + + + Creates a Reinforcement bar from the selected face of a structural object Creates a Reinforcement bar from the selected face of a structural object @@ -1022,12 +1397,12 @@ Arch_Remove - + Remove component Ta bort komponent - + Remove the selected components from their parents, or create a hole in a component Ta bort de valda komponenterna från deras föräldrar, eller skapa ett hål i en komponent @@ -1035,12 +1410,12 @@ Arch_RemoveShape - + Remove Shape from Arch Ta bort form från Arch - + Removes cubic shapes from Arch components Tar bort kubiska former från Arch komponenter @@ -1048,25 +1423,25 @@ Arch_Roof - + Roof Tak - - Creates a roof object from the selected face of an object - Skapar ett tak-objekt från den valda ytan av ett objekt + + Creates a roof object from the selected wire. + Creates a roof object from the selected wire. Arch_SectionPlane - + Section Plane Sektionsplan - + Creates a section plane object, including the selected objects Skapar ett avsnitt plan objekt, inklusive de markerade objekten @@ -1074,12 +1449,12 @@ Arch_SelectNonSolidMeshes - + Select non-manifold meshes Välj icke-manifold nät - + Selects all non-manifold meshes from the document or from the selected groups Väljer alla icke-manifold nät från dokumentet eller från de valda grupperna @@ -1087,12 +1462,12 @@ Arch_Site - + Site Plats - + Creates a site object including selected objects. Skapar ett platsobjekt inkluderande valda objekt. @@ -1100,17 +1475,17 @@ Arch_Space - + Space - Space + Utrymme - + Creates a space object from selected boundary objects Creates a space object from selected boundary objects - + Creates a stairs object Creates a stairs object @@ -1118,12 +1493,12 @@ Arch_SplitMesh - + Split Mesh Splitta nät - + Splits selected meshes into independent components Delar valda nät i självständiga komponenter @@ -1131,20 +1506,20 @@ Arch_Stairs - + Stairs - Stairs + Trappor Arch_Structure - + Structure Struktur - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Skapar ett strukturobjekt från början eller från ett markerat objekt (skiss, tråd, yta eller solid) @@ -1152,25 +1527,38 @@ Arch_Survey - + Survey Survey - + Starts survey Starts survey + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Toggle IFC Brep flag + + + + Force an object to be exported as Brep or not + Force an object to be exported as Brep or not + + Arch_Wall - + Wall Vägg - + Creates a wall object from scratch or from a selected object (wire, face or solid) Skapar ett väggobjekt från början eller från ett markerat objekt (tråd, yta eller solid) @@ -1178,12 +1566,12 @@ Arch_Window - + Window Fönster - + Creates a window object from a selected object (wire, rectangle or sketch) Skapar ett fönster-objekt från ett markerat objekt (tråd, rektangel eller skiss) @@ -1210,16 +1598,6 @@ IFC import IFC import - - - Creates groups for each Arch object type - Skapar grupper för varje Arch objekttyp - - - - Group components by types - Gruppera komponenter efter typer - 2D rendering @@ -1246,22 +1624,22 @@ Anger hur många gånger som den visade linjetjockleken måste tillämpas på klippta linjer - + Width: Bredd: - + Height: Höjd: - + Color: - Color: + Färg: - + Length: Längd: @@ -1278,32 +1656,32 @@ The default width for new windows - The default width for new windows + Standardbredden för nya fönster The default height for new windows - The default height for new windows + Standardhöjden för nya fönster Thickness: - Thickness: + Tjocklek: The default thickness for new windows - The default thickness for new windows + Standardtjocklek för nya fönster Frame color: - Frame color: + Ramfärg: Glass color: - Glass color: + Glasfärg: @@ -1348,7 +1726,7 @@ Tolerance: - Tolerance: + Tolerans: @@ -1373,92 +1751,57 @@ Cut method - Cut method - - - - Import / export - Import / export + Snittmetod Check this to display debug messages while importing IFC files - Check this to display debug messages while importing IFC files + Markera för att Visa debug-meddelanden vid import av IFC-filer Show debug messages - Show debug messages + Visa debug-meddelanden - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - - - - Force python parser - Force python parser - - - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - + Separate openings Separate openings - + If this is checked, object names will be prefixed with the IFC ID number If this is checked, object names will be prefixed with the IFC ID number - + Prefix names with ID number Prefix names with ID number - + Exclude list: Exclude list: - + A comma-separated list of Ifc entities to exclude from import A comma-separated list of Ifc entities to exclude from import - - Custom IFC schema (internal parser only) - Custom IFC schema (internal parser only) - - - + IFC export IFC export - + Scaling factor - Scaling factor - - - - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - - - - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - - - - Save a list of exported objects - Save a list of exported objects + Skalningsfaktor @@ -1468,7 +1811,7 @@ Defaults - Defaults + Grundinställningar @@ -1476,7 +1819,7 @@ Walls - + mm mm @@ -1488,7 +1831,7 @@ Rebars - Rebars + Armeringsjärn @@ -1501,95 +1844,103 @@ Transparens: - - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - - - - Separate placements - Separate placements - - - - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - - - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. - - Force export as Breps - Force export as Breps - - - - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - - - - Join multi-solid objects - Join multi-solid objects - - - + Collada export Collada export - - WebGL export - WebGL export + + Hidden geomety pattern + Hidden geomety pattern - - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + This is the SVG stroke-dasharray property to apply to projections of hidden objects. - - Discretize wires - Discretize wires + + 30, 10 + 30, 10 + + + + Stairs + Trappor + + + + Number of steps: + Number of steps: + + + + Panels + Panels + + + + mm + mm + + + + Thickness + Tjocklek + + + + IFC / DAE / WebGL + IFC / DAE / WebGL + + + + Force export as Brep + Force export as Brep + + + + Workbench + + + Arch tools + Arch tools + + + + Draft tools + Draft tools + + + + Draft mod tools + Draft mod tools arch - - Arch tools - Arch verktyg - - - - Draft tools - Skissverktyg - - - - Draft mod tools - Verktyg för skissläge - - - + &Architecture &Arkitektur - + &Draft &Skiss - + Utilities Utilities - + Snapping Snapping diff --git a/src/Mod/Arch/Resources/translations/Arch_uk.qm b/src/Mod/Arch/Resources/translations/Arch_uk.qm index b7d8bdb0f6..c0f0be9a16 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_uk.qm and b/src/Mod/Arch/Resources/translations/Arch_uk.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_uk.ts b/src/Mod/Arch/Resources/translations/Arch_uk.ts index a567f43a56..f6094960eb 100644 --- a/src/Mod/Arch/Resources/translations/Arch_uk.ts +++ b/src/Mod/Arch/Resources/translations/Arch_uk.ts @@ -4,407 +4,362 @@ Arch - + Components Компоненти - + Components of this object Компоненти цього об'єкта - + Axes Вісі - + Create Axis Створити вісь - + The intervals between axes Відстані між вісями - + The angles of each axis The angles of each axis - + The length of the axes Довжина осей - + The size of the axis bubbles The size of the axis bubbles - + Remove Видалити - + Add Додати - + Axis Вісь - + Distance Відстань - + Angle Кут - - Building - Будівля - - - + Type conversion Перетворення типу - + Create Building Створити будівлю - + Floor Ярус - + removing sketch support to avoid cross-referencing removing sketch support to avoid cross-referencing - - No objects are cut by the plane - No objects are cut by the plane - - - + is not closed не замкнений - + is not valid неприпустимо - + doesn't contain any solid - не містить жодного твердого тіла + не містить жодного суцільного тіла - + contains a non-closed solid - contains a non-closed solid + містить незамкнене суцільне тіло - + contains faces that are not part of any solid - contains faces that are not part of any solid + містить поверхні, які не належать жодному суцільному тілу - + Grouping Групування - + Ungrouping Розгрупування - + Split Mesh Розділити меш - + Mesh to Shape Меш у форму - + All good! no problems found Все добре! Проблем не виявлено - + Base component Основний компонент - + Additions Додавання - + Subtractions Віднімання - + Objects Об'єкти - + closing Sketch edit закрити редагування ескізу - + The height of this floor висота цього поверху - + Roof Покрівля - + Create Roof Створити покрівлю - + Unable to create a roof Не вдалося створити покрівлю - - The angle of this roof - Кут ця покрівлі - - - + The face number of the base object used to build this roof The face number of the base object used to build this roof - + Page Сторінка - + View of Вид - + Create Section Plane Створити площину розрізу - + The objects that must be considered by this section plane. Empty means all document The objects that must be considered by this section plane. Empty means all document - - The display size of this section plane - The display size of this section plane - - - - No shape has been computed yet, select wireframe rendering and render again - No shape has been computed yet, select wireframe rendering and render again - - - + Skipping invalid object: Skipping invalid object: - - Site - Ділянка - - - + Create Site Створити ділянку - - Structure - Структура - - - + Create Structure Створити структуру - + The length of this element, if not based on a profile The length of this element, if not based on a profile - + The width of this element, if not based on a profile The width of this element, if not based on a profile - + The height or extrusion depth of this element. Keep 0 for automatic The height or extrusion depth of this element. Keep 0 for automatic - + Axes systems this structure is built on Axes systems this structure is built on - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The element numbers to exclude when this structure is based on axes The element numbers to exclude when this structure is based on axes - - Wall - Стіна - - - + Create Wall Створити стінку - + WallTrace WallTrace - + Wall options Параметри стіни - + Width Ширина - + Height Висота - + Alignment Вирівняти - + The width of this wall. Not used if this wall is based on a face Ширина цієї стінки. Якщо ця стінка базується на поверхні, не використовується - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid Висота цієї стіни. Збережіть 0 для автоматичного визначення. Не використовується, якщо ця стіна базується на твердій поверхні - + The alignment of this wall on its base object, if applicable The alignment of this wall on its base object, if applicable - + Error: Invalid base object Помилка: неприпустимий базовий об’єкт - + This mesh is an invalid solid This mesh is an invalid solid - - Window - Вікно - - - + Create Window Створити вікно - + the components of this window компоненти цього вікна - + Edit Правка - + Create/update component Створити або оновити компонент - + Base 2D object Базовий двовимірний об’єкт - + Wires Каркас - + Create new component Створити новий компонент - + Name Назва - + Type Тип - + Thickness Товщина - + Z offset Z offset @@ -419,73 +374,68 @@ файл %s створений успішно. - + Error: Couldn't determine character encoding Помилка: Не вдалося визначити кодування символів - + Couldn't locate IfcOpenShell Не вдалося знайти IfcOpenShell - + IFC Schema not found, IFC import disabled. Схема IFC не знайдена. Імпортування IFC заборонено. - + successfully written успішно записано - + The numbering style The numbering style - + removing sketch external references to avoid cross-referencing removing sketch external references to avoid cross-referencing - - Invalid cutplane - Invalid cutplane - - - + Add space boundary Add space boundary - + Remove space boundary Remove space boundary - + Please select a base object Please select a base object - + Fixtures Fixtures - + Armatures Armatures - + The placement of this group The placement of this group @@ -495,318 +445,278 @@ Frame - + Create Frame Create Frame - - Rebar - Rebar - - - + Create Rebar - Create Rebar + Створити арматуру - + Please select a base face on a structural object Please select a base face on a structural object - + Please select a base object Please select a base object - - Section - Секція - - - + The placement of this object - The placement of this object + Розміщення цього об'єкта - + The terrain of this site The terrain of this site - + The address of this site - The address of this site + Адреса цього сайту - + The geographic coordinates of this site The geographic coordinates of this site - + An url that shows this site in a mapping website An url that shows this site in a mapping website - - Space - Space - - - + Create Space Create Space - - A base shape defining this space - A base shape defining this space - - - + The objects that make the boundaries of this space object The objects that make the boundaries of this space object - - Stairs - Stairs - - - + Create Stairs - Create Stairs + Створити сходи - + The length of these stairs, if no baseline is defined The length of these stairs, if no baseline is defined - + The width of these stairs The width of these stairs - + The total height of these stairs The total height of these stairs - + The alignment of these stairs on their baseline, if applicable The alignment of these stairs on their baseline, if applicable - + The number of risers in these stairs The number of risers in these stairs - + The depth of the treads of these stairs The depth of the treads of these stairs - + The height of the risers of these stairs The height of the risers of these stairs - + The size of the nosing The size of the nosing - + The thickness of the treads The thickness of the treads - + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in - + The type of landings of these stairs The type of landings of these stairs - + The type of winders in these stairs The type of winders in these stairs - + The type of structure of these stairs The type of structure of these stairs - + The thickness of the massive structure or of the stringers The thickness of the massive structure or of the stringers - + The width of the stringers The width of the stringers - + The offset between the border of the stairs and the structure The offset between the border of the stairs and the structure Wood - Wood + Деревина Steel - Steel + Сталь - + Structure options Structure options - + Preset Preset - + Length Довжина - + Rotate Обертання - + Con&tinue - Con&tinue + Продовжити - + An optional extrusion path for this element An optional extrusion path for this element - + Armatures contained in this element Armatures contained in this element - - The role of this structural element - The role of this structural element - - - + The structural nodes of this element The structural nodes of this element - + Error: The base shape couldn't be extruded along this tool object Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape Couldn't compute a shape - + Merge Wall Merge Wall - + The selected wall contain no subwall to merge The selected wall contain no subwall to merge - + Please select only wall objects Please select only wall objects - + Merge Walls - Merge Walls + Об'єднати стіни - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) - + Pick a face on an existing object or select a preset Pick a face on an existing object or select a preset - + Window options Window options - + The depth of the hole that this window makes in its host object. Keep 0 for automatic. The depth of the hole that this window makes in its host object. Keep 0 for automatic. - - an optional volume to be subtracted from hosts of this window - an optional volume to be subtracted from hosts of this window - - - + The width of this window (for preset windows only) The width of this window (for preset windows only) - + The height of this window (for preset windows only) The height of this window (for preset windows only) - + The normal direction of this window The normal direction of this window - - The role of this window - The role of this window - - - + Unable to create component Unable to create component @@ -820,50 +730,39 @@ - + IfcOpenShell not found or disabled, falling back on internal parser. IfcOpenShell not found or disabled, falling back on internal parser. - + Distances (mm) and angles (deg) between axes Distances (mm) and angles (deg) between axes - + Error computing the shape of this object Error computing the shape of this object - - StructuralSystem - StructuralSystem - - - + Create Structural System Create Structural System - - The role of this wall - The role of this wall - - - + Error: IfcOpenShell is not installed Error: IfcOpenShell is not installed - + Error: your IfcOpenShell version is too old - Error: your IfcOpenShell version is too old - + Помилка: ваша версія IfcOpenShell застаріла @@ -872,16 +771,455 @@ Found a shape containing curves, triangulating + + + Invalid cutplane + + Invalid cutplane + + + + + No objects are cut by the plane + + No objects are cut by the plane + + + + + Object doesn't have settable IFC Attributes + Object doesn't have settable IFC Attributes + + + + Disabling Brep force flag of object + Disabling Brep force flag of object + + + + Enabling Brep force flag of object + Enabling Brep force flag of object + + + + The base object this component is built upon + The base object this component is built upon + + + + Other shapes that are appended to this object + Other shapes that are appended to this object + + + + Other shapes that are subtracted from this object + Other shapes that are subtracted from this object + + + + An optional description for this component + An optional description for this component + + + + An optional tag for this component + An optional tag for this component + + + + Custom IFC properties and attributes + Custom IFC properties and attributes + + + + A material for this object + A material for this object + + + + The role of this object + The role of this object + + + + Specifies if this object must move together when its host is moved + Specifies if this object must move together when its host is moved + + + + has no solid + has no solid + + + + has an invalid shape + has an invalid shape + + + + has a null shape + has a null shape + + + + Cutting + Cutting + + + + You must select a base object first! + You must select a base object first! + + + + Create Equipment + Create Equipment + + + + You must select exactly one base object + You must select exactly one base object + + + + The selected object must be a mesh + The selected object must be a mesh + + + + This mesh has more than 1000 facets. + This mesh has more than 1000 facets. + + + + This operation can take a long time. Proceed? + This operation can take a long time. Proceed? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + The mesh has more than 500 facets. This will take a couple of minutes... + + + + Create 3 views + Create 3 views + + + + an optional 2D shape representing a top view of this equipment + an optional 2D shape representing a top view of this equipment + + + + an optional 2D shape representing a front view of this equipment + an optional 2D shape representing a front view of this equipment + + + + an optional 2D shape representing a side view of this equipment + an optional 2D shape representing a side view of this equipment + + + + The model description of this equipment + The model description of this equipment + + + + The url of the product page of this equipment + The url of the product page of this equipment + + + + Create Panel + Create Panel + + + + Panel options + Panel options + + + + The thickness or extrusion depth of this element + The thickness or extrusion depth of this element + + + + The number of sheets to use + The number of sheets to use + + + + The offset between this panel and its baseline + The offset between this panel and its baseline + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + + + + Id + Id + + + + IdRel + IdRel + + + + If false, non-solids will be cut too, with possible wrong results. + If false, non-solids will be cut too, with possible wrong results. + + + + The display length of this section plane + The display length of this section plane + + + + The display height of this section plane + The display height of this section plane + + + + The size of the arrows of this section plane + The size of the arrows of this section plane + + + + The computed floor area of this space + The computed floor area of this space + + + + The finishing of the floor of this space + The finishing of the floor of this space + + + + The finishing of the walls of this space + The finishing of the walls of this space + + + + The finishing of the ceiling of this space + The finishing of the ceiling of this space + + + + Objects that are included inside this space, such as furniture + Objects that are included inside this space, such as furniture + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + + + + The name of the font + The name of the font + + + + The color of the area text + The color of the area text + + + + The size of the text font + The size of the text font + + + + The size of the first line of text + The size of the first line of text + + + + The space between the lines of text + The space between the lines of text + + + + The position of the text. Leave (0,0,0) for automatic position + The position of the text. Leave (0,0,0) for automatic position + + + + The justification of the text + The justification of the text + + + + The number of decimals to use for calculated texts + The number of decimals to use for calculated texts + + + + Show the unit suffix + Show the unit suffix + + + + A description of the standard profile this element is based upon + A description of the standard profile this element is based upon + + + + Sill height + Sill height + + + + CutVolume + CutVolume + + + + CutPlane + CutPlane + + + + PreviewCutVolume + PreviewCutVolume + + + + Cut Plane + Cut Plane + + + + Cut Plane options + Cut Plane options + + + + Wich side to cut + Wich side to cut + + + + Behind + Behind + + + + Front + Фронт + + + + Crossing point not found in profile. + + Crossing point not found in profile. + + + + + A list of angles for each roof pane + A list of angles for each roof pane + + + + A list of horizontal length projections for each roof pane + A list of horizontal length projections for each roof pane + + + + A list of IDs of relative profiles for each roof pane + A list of IDs of relative profiles for each roof pane + + + + A list of thicknesses for each roof pane + A list of thicknesses for each roof pane + + + + A list of overhangs for each roof pane + A list of overhangs for each roof pane + + + + A list of calculated heights for each roof pane + A list of calculated heights for each roof pane + + + + Angle (deg) + Angle (deg) + + + + Run (mm) + Run (mm) + + + + Thickness (mm) + Thickness (mm) + + + + Overhang (mm) + Overhang (mm) + + + + Height (mm) + Height (mm) + + + + Arch_3Views + + + 3 views from mesh + 3 views from mesh + + + + Creates 3 views (top, front, side) from a mesh-based object + Creates 3 views (top, front, side) from a mesh-based object + Arch_Add - + Add component Додати компонент - + Adds the selected components to the active object Додає обраний компонент до активного об’єкту @@ -889,12 +1227,12 @@ Arch_Axis - + Axis Вісь - + Creates an axis system. Creates an axis system. @@ -902,12 +1240,12 @@ Arch_Building - + Building Будівля - + Creates a building object including selected objects. Створює об’єкт будівлі при цьому включає туди обрані об’єкти @@ -915,17 +1253,17 @@ Arch_Check - + Check Перевірити - + Checks the selected objects for problems Перевірити виділені об'єкти на наявність проблем - + Explore the contents of an Ifc file Explore the contents of an Ifc file @@ -933,18 +1271,41 @@ Arch_CloseHoles - + Close holes Close holes - + Closes holes in open shapes, turning them solids - Closes holes in open shapes, turning them solids + Закриває отвори у відкритих формах, перетворюючи їх на суцільні тіла - Arch_Fixture + Arch_CutPlane + + + Cut with plane + Cut with plane + + + + Cut an object with a plane + Cut an object with a plane + + + + Arch_Equipment + + + Equipment + Equipment + + + + Creates an equipment object from a selected object (Part or Mesh) + Creates an equipment object from a selected object (Part or Mesh) + Arch_Floor @@ -962,12 +1323,12 @@ Arch_Frame - + Frame Frame - + Creates a frame object from a planar 2D object and a profile Creates a frame object from a planar 2D object and a profile @@ -975,7 +1336,7 @@ Arch_IfcExplorer - + Ifc Explorer Ifc Explorer @@ -983,12 +1344,12 @@ Arch_MergeWalls - + Merge Walls - Merge Walls + Об'єднати стіни - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -996,25 +1357,38 @@ Arch_MeshToShape - + Mesh to Shape Меш у форму - + Turns selected meshes into Part Shape objects Turns selected meshes into Part Shape objects - Arch_Rebar + Arch_Panel - - Rebar - Rebar + + Panel + Panel - + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + + + + Arch_Rebar + + + Rebar + Арматура + + + Creates a Reinforcement bar from the selected face of a structural object Creates a Reinforcement bar from the selected face of a structural object @@ -1022,12 +1396,12 @@ Arch_Remove - + Remove component Видалити компонент - + Remove the selected components from their parents, or create a hole in a component Видалення обраних компонентів від своїх батьків, або створити отвір в компоненті @@ -1035,12 +1409,12 @@ Arch_RemoveShape - + Remove Shape from Arch Видалити фігуру з Arch - + Removes cubic shapes from Arch components Видаляє з компонентів Arch кубічні фігури @@ -1048,25 +1422,25 @@ Arch_Roof - + Roof Покрівля - - Creates a roof object from the selected face of an object - Creates a roof object from the selected face of an object + + Creates a roof object from the selected wire. + Creates a roof object from the selected wire. Arch_SectionPlane - + Section Plane Поверхня перерізу - + Creates a section plane object, including the selected objects Creates a section plane object, including the selected objects @@ -1074,12 +1448,12 @@ Arch_SelectNonSolidMeshes - + Select non-manifold meshes Обрати немноговидні сітки - + Selects all non-manifold meshes from the document or from the selected groups Виділяє всі немноговидні сітки з документу або обраних груп @@ -1087,12 +1461,12 @@ Arch_Site - + Site Ділянка - + Creates a site object including selected objects. Створює об’єкт поверхні, який включає обрані об’єкти @@ -1100,17 +1474,17 @@ Arch_Space - + Space Space - + Creates a space object from selected boundary objects Creates a space object from selected boundary objects - + Creates a stairs object Creates a stairs object @@ -1118,12 +1492,12 @@ Arch_SplitMesh - + Split Mesh Розділити меш - + Splits selected meshes into independent components Розбиває меш на незалежні компоненти @@ -1131,20 +1505,20 @@ Arch_Stairs - + Stairs - Stairs + Сходи Arch_Structure - + Structure Структура - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) Створює об’єкт структуру з нуля, або з обраного об’єкту (ескіз, дріт, поверхня або суцільна) @@ -1152,25 +1526,38 @@ Arch_Survey - + Survey Survey - + Starts survey Starts survey + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Toggle IFC Brep flag + + + + Force an object to be exported as Brep or not + Force an object to be exported as Brep or not + + Arch_Wall - + Wall Стіна - + Creates a wall object from scratch or from a selected object (wire, face or solid) Створює об’єкт стіни з нуля, або з обраного об’єкту (дріт, поверхня або суцільна) @@ -1178,12 +1565,12 @@ Arch_Window - + Window Вікно - + Creates a window object from a selected object (wire, rectangle or sketch) Creates a window object from a selected object (wire, rectangle or sketch) @@ -1210,16 +1597,6 @@ IFC import Імпорт IFC - - - Creates groups for each Arch object type - Creates groups for each Arch object type - - - - Group components by types - Групувати компоненти за типами - 2D rendering @@ -1246,29 +1623,29 @@ Specifies how many times the viewed line thickness must be applied to cut lines - + Width: Ширина: - + Height: Висота: - + Color: - Color: + Колір: - + Length: Довжина: Diameter - Diameter + Діаметр @@ -1278,7 +1655,7 @@ The default width for new windows - The default width for new windows + Ширина нових вікон за замовчанням @@ -1288,7 +1665,7 @@ Thickness: - Thickness: + Товщина: @@ -1338,7 +1715,7 @@ If this is checked, conversion is faster but the result might still contain triangulated faces - If this is checked, conversion is faster but the result might still contain triangulated faces + Якщо позначено цей пункт, перетворення відбувається швидше, але результат все ще може містити тріангульовані поверхні @@ -1375,91 +1752,56 @@ Cut method Cut method - - - Import / export - Import / export - Check this to display debug messages while importing IFC files - Check this to display debug messages while importing IFC files + Встановить цю позначку, щоб показати повідомлення відлагодження при імпорті файлів IFC Show debug messages - Show debug messages + Показати повідомлення відлагодження - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - - - - Force python parser - Force python parser - - - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - + Separate openings Separate openings - + If this is checked, object names will be prefixed with the IFC ID number If this is checked, object names will be prefixed with the IFC ID number - + Prefix names with ID number Prefix names with ID number - + Exclude list: Exclude list: - + A comma-separated list of Ifc entities to exclude from import A comma-separated list of Ifc entities to exclude from import - - Custom IFC schema (internal parser only) - Custom IFC schema (internal parser only) - - - + IFC export - IFC export + Експорт у IFC - + Scaling factor Scaling factor - - - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - - - - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - - - - Save a list of exported objects - Save a list of exported objects - Snap to baselines of Arch objects (override with CTRL) @@ -1473,12 +1815,12 @@ Walls - Walls + Стіни - + mm - mm + мм @@ -1501,95 +1843,103 @@ Прозорість: - - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - - - - Separate placements - Separate placements - - - - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - - - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. - - Force export as Breps - Force export as Breps - - - - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - - - - Join multi-solid objects - Join multi-solid objects - - - + Collada export Collada export - - WebGL export - WebGL export + + Hidden geomety pattern + Hidden geomety pattern - - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + This is the SVG stroke-dasharray property to apply to projections of hidden objects. - - Discretize wires - Discretize wires + + 30, 10 + 30, 10 + + + + Stairs + Сходи + + + + Number of steps: + Number of steps: + + + + Panels + Panels + + + + mm + мм + + + + Thickness + Товщина + + + + IFC / DAE / WebGL + IFC / DAE / WebGL + + + + Force export as Brep + Force export as Brep + + + + Workbench + + + Arch tools + Arch tools + + + + Draft tools + Draft tools + + + + Draft mod tools + Draft mod tools arch - - Arch tools - Архітектурні інструменти - - - - Draft tools - Інструменти креслення - - - - Draft mod tools - Інструменти режиму креслення - - - + &Architecture &Архітектура - + &Draft &Ескіз - + Utilities - Utilities + Утиліти - + Snapping Snapping diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm b/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm index 2a6a7fe007..1bfa53d4c5 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm and b/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts b/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts index dda112d805..ff23a51226 100644 --- a/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts +++ b/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts @@ -4,407 +4,362 @@ Arch - + Components 组件 - + Components of this object 此对象的组件 - + Axes 轴线 - + Create Axis 创建轴线 - + The intervals between axes 轴线间距 - + The angles of each axis 每个轴线的角度 - + The length of the axes 轴线长度 - + The size of the axis bubbles 轴线末端圆圈大小 - + Remove 删除 - + Add 添加 - + Axis 轴线 - + Distance 距离 - + Angle 角度 - - Building - 建筑 - - - + Type conversion 类型转换 - + Create Building 创建建筑 - + Floor 楼板 - + removing sketch support to avoid cross-referencing 移除草绘支持以避免交叉引用 - - No objects are cut by the plane - 平面未与对象相交 - - - + is not closed 不闭合 - + is not valid 无效 - + doesn't contain any solid 不含实体 - + contains a non-closed solid 包含未封闭实体 - + contains faces that are not part of any solid 包含不属于任何实体的面 - + Grouping 成组 - + Ungrouping 解组 - + Split Mesh 拆分网格 - + Mesh to Shape 网格转换为形体 - + All good! no problems found 一切正常!未发现问题 - + Base component 基础组件 - + Additions 增补 - + Subtractions 消减 - + Objects 对象 - + closing Sketch edit 关闭草绘编辑 - + The height of this floor 楼板标高 - + Roof 屋顶 - + Create Roof 创建屋顶 - + Unable to create a roof 无法创建屋顶 - - The angle of this roof - 屋顶角度 - - - + The face number of the base object used to build this roof 用来生成屋顶的基对象的面数量 - + Page 页 - + View of 视图 - + Create Section Plane 创建剖切面 - + The objects that must be considered by this section plane. Empty means all document 此剖切平面需考虑的物体.空表示文档中所有物体 - - The display size of this section plane - 剖切面的显示尺寸 - - - - No shape has been computed yet, select wireframe rendering and render again - No shape has been computed yet, select wireframe rendering and render again - - - + Skipping invalid object: 跳过无效对象: - - Site - 场地 - - - + Create Site 创建场地 - - Structure - 结构 - - - + Create Structure 创建结构体 - + The length of this element, if not based on a profile 该元素长度,其不基于轮廓 - + The width of this element, if not based on a profile 该元素宽度,其不基于轮廓 - + The height or extrusion depth of this element. Keep 0 for automatic 此元素的高度或拉伸长度.0表示自动 - + Axes systems this structure is built on 该结构基于的轴网系统 - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) 该对象的法向拉伸方向((0,0,0)表示自动法向) - + The element numbers to exclude when this structure is based on axes - The element numbers to exclude when this structure is based on axes + 元素编号，以排除这种结构基于轴时 - - Wall - 墙 - - - + Create Wall 创建墙 - + WallTrace 墙体迹线 - + Wall options 墙体选项 - + Width 宽度 - + Height 高度 - + Alignment 对齐方式 - + The width of this wall. Not used if this wall is based on a face 墙体厚度.当墙基于面时无效 - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid 墙体高度.0表示自动.当墙基于实体时无效 - + The alignment of this wall on its base object, if applicable - The alignment of this wall on its base object, if applicable + 如可以实现，墙体将被对齐到其基对象上 - + Error: Invalid base object 错误:无效的基对象 - + This mesh is an invalid solid 该网格是无效实体 - - Window - 窗口 - - - + Create Window 创建窗 - + the components of this window 此窗的组件 - + Edit 编辑 - + Create/update component 创建/更新组件 - + Base 2D object 二维基对象 - + Wires 线框 - + Create new component 创建新组件 - + Name 名称 - + Type 类型 - + Thickness 厚度 - + Z offset Z偏移量 @@ -419,391 +374,344 @@ 文件%s已成功创建. - + Error: Couldn't determine character encoding 错误:无法确定字符编码 - + Couldn't locate IfcOpenShell 无法找到IfcOpenShell - + IFC Schema not found, IFC import disabled. 未发现IFC架构, 禁用IFC导入. - + successfully written 成功写入 - + The numbering style - The numbering style + 编码风格 - + removing sketch external references to avoid cross-referencing - removing sketch external references to avoid cross-referencing + 移除草绘中的外部引用，以避免交叉引用 - - Invalid cutplane - Invalid cutplane - - - + Add space boundary - Add space boundary + 添加空间边界 - + Remove space boundary - Remove space boundary + 移除空间边界 - + Please select a base object - Please select a base object + 请选择一个基物体 - + Fixtures - Fixtures + 固定装置 - + Armatures - Armatures + 转动装置 - + The placement of this group - The placement of this group + 这一组的位置 Frame - Frame + 框架 - + Create Frame - Create Frame + 创建框架 - - Rebar - Rebar - - - + Create Rebar - Create Rebar + 创建螺纹钢 - + Please select a base face on a structural object - Please select a base face on a structural object - - - - - Please select a base object - - Please select a base object - - - - - Section - 截面 - - - - The placement of this object - The placement of this object - - - - The terrain of this site - The terrain of this site - - - - The address of this site - The address of this site - - - - The geographic coordinates of this site - The geographic coordinates of this site - - - - An url that shows this site in a mapping website - An url that shows this site in a mapping website - - - - Space - Space - - - - Create Space - Create Space - - - - A base shape defining this space - A base shape defining this space + 请选择一个基础面结构的对象上 + Please select a base object + + 请选择一个基本对象 + + + + The placement of this object + 此对象的位置 + + + + The terrain of this site + 本网站的地形 + + + + The address of this site + 此网站的地址 + + + + The geographic coordinates of this site + 此站点的地理坐标 + + + + An url that shows this site in a mapping website + 在映射网站中显示此网站的 url + + + + Create Space + 创建空间 + + + The objects that make the boundaries of this space object - The objects that make the boundaries of this space object + 空间物体的边界 - - Stairs - Stairs - - - + Create Stairs - Create Stairs + 创建楼梯 - + The length of these stairs, if no baseline is defined - The length of these stairs, if no baseline is defined + 楼梯长度，如果没有定义基准线 - + The width of these stairs - The width of these stairs + 这些楼梯的宽度 - + The total height of these stairs The total height of these stairs - + The alignment of these stairs on their baseline, if applicable The alignment of these stairs on their baseline, if applicable - + The number of risers in these stairs The number of risers in these stairs - + The depth of the treads of these stairs The depth of the treads of these stairs - + The height of the risers of these stairs The height of the risers of these stairs - + The size of the nosing The size of the nosing - + The thickness of the treads The thickness of the treads - + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in - + The type of landings of these stairs The type of landings of these stairs - + The type of winders in these stairs The type of winders in these stairs - + The type of structure of these stairs The type of structure of these stairs - + The thickness of the massive structure or of the stringers The thickness of the massive structure or of the stringers - + The width of the stringers The width of the stringers - + The offset between the border of the stairs and the structure The offset between the border of the stairs and the structure Wood - Wood + 木头 Steel - Steel + 钢 - + Structure options - Structure options + 结构选项 - + Preset - Preset + 预设​​​​ - + Length 长度 - + Rotate 旋转 - + Con&tinue - Con&tinue + Con & 继续 - + An optional extrusion path for this element An optional extrusion path for this element - + Armatures contained in this element Armatures contained in this element - - The role of this structural element - The role of this structural element - - - + The structural nodes of this element The structural nodes of this element - + Error: The base shape couldn't be extruded along this tool object Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape Couldn't compute a shape - + Merge Wall - Merge Wall + 合并壁 - + The selected wall contain no subwall to merge - The selected wall contain no subwall to merge + 在所选的墙上包含没有浇筑合并 - + Please select only wall objects - Please select only wall objects + 请选择只有墙上的对象 - + Merge Walls - Merge Walls + 合并壁 - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) - + Pick a face on an existing object or select a preset Pick a face on an existing object or select a preset - + Window options Window options - + The depth of the hole that this window makes in its host object. Keep 0 for automatic. The depth of the hole that this window makes in its host object. Keep 0 for automatic. - - an optional volume to be subtracted from hosts of this window - an optional volume to be subtracted from hosts of this window - - - + The width of this window (for preset windows only) The width of this window (for preset windows only) - + The height of this window (for preset windows only) The height of this window (for preset windows only) - + The normal direction of this window The normal direction of this window - - The role of this window - The role of this window - - - + Unable to create component Unable to create component @@ -817,46 +725,36 @@ - + IfcOpenShell not found or disabled, falling back on internal parser. IfcOpenShell not found or disabled, falling back on internal parser. - + Distances (mm) and angles (deg) between axes Distances (mm) and angles (deg) between axes - + Error computing the shape of this object Error computing the shape of this object - - StructuralSystem - StructuralSystem - - - + Create Structural System - Create Structural System + 创建结构体系 - - The role of this wall - The role of this wall - - - + Error: IfcOpenShell is not installed Error: IfcOpenShell is not installed - + Error: your IfcOpenShell version is too old Error: your IfcOpenShell version is too old @@ -869,16 +767,455 @@ Found a shape containing curves, triangulating + + + Invalid cutplane + + Invalid cutplane + + + + + No objects are cut by the plane + + No objects are cut by the plane + + + + + Object doesn't have settable IFC Attributes + Object doesn't have settable IFC Attributes + + + + Disabling Brep force flag of object + Disabling Brep force flag of object + + + + Enabling Brep force flag of object + Enabling Brep force flag of object + + + + The base object this component is built upon + The base object this component is built upon + + + + Other shapes that are appended to this object + Other shapes that are appended to this object + + + + Other shapes that are subtracted from this object + Other shapes that are subtracted from this object + + + + An optional description for this component + An optional description for this component + + + + An optional tag for this component + An optional tag for this component + + + + Custom IFC properties and attributes + Custom IFC properties and attributes + + + + A material for this object + A material for this object + + + + The role of this object + The role of this object + + + + Specifies if this object must move together when its host is moved + Specifies if this object must move together when its host is moved + + + + has no solid + has no solid + + + + has an invalid shape + has an invalid shape + + + + has a null shape + has a null shape + + + + Cutting + Cutting + + + + You must select a base object first! + You must select a base object first! + + + + Create Equipment + Create Equipment + + + + You must select exactly one base object + You must select exactly one base object + + + + The selected object must be a mesh + The selected object must be a mesh + + + + This mesh has more than 1000 facets. + This mesh has more than 1000 facets. + + + + This operation can take a long time. Proceed? + This operation can take a long time. Proceed? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + The mesh has more than 500 facets. This will take a couple of minutes... + + + + Create 3 views + Create 3 views + + + + an optional 2D shape representing a top view of this equipment + an optional 2D shape representing a top view of this equipment + + + + an optional 2D shape representing a front view of this equipment + an optional 2D shape representing a front view of this equipment + + + + an optional 2D shape representing a side view of this equipment + an optional 2D shape representing a side view of this equipment + + + + The model description of this equipment + The model description of this equipment + + + + The url of the product page of this equipment + The url of the product page of this equipment + + + + Create Panel + Create Panel + + + + Panel options + Panel options + + + + The thickness or extrusion depth of this element + The thickness or extrusion depth of this element + + + + The number of sheets to use + The number of sheets to use + + + + The offset between this panel and its baseline + The offset between this panel and its baseline + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + + + + Id + Id + + + + IdRel + IdRel + + + + If false, non-solids will be cut too, with possible wrong results. + If false, non-solids will be cut too, with possible wrong results. + + + + The display length of this section plane + The display length of this section plane + + + + The display height of this section plane + The display height of this section plane + + + + The size of the arrows of this section plane + The size of the arrows of this section plane + + + + The computed floor area of this space + The computed floor area of this space + + + + The finishing of the floor of this space + The finishing of the floor of this space + + + + The finishing of the walls of this space + The finishing of the walls of this space + + + + The finishing of the ceiling of this space + The finishing of the ceiling of this space + + + + Objects that are included inside this space, such as furniture + Objects that are included inside this space, such as furniture + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + + + + The name of the font + The name of the font + + + + The color of the area text + The color of the area text + + + + The size of the text font + The size of the text font + + + + The size of the first line of text + The size of the first line of text + + + + The space between the lines of text + The space between the lines of text + + + + The position of the text. Leave (0,0,0) for automatic position + The position of the text. Leave (0,0,0) for automatic position + + + + The justification of the text + The justification of the text + + + + The number of decimals to use for calculated texts + The number of decimals to use for calculated texts + + + + Show the unit suffix + Show the unit suffix + + + + A description of the standard profile this element is based upon + A description of the standard profile this element is based upon + + + + Sill height + Sill height + + + + CutVolume + CutVolume + + + + CutPlane + CutPlane + + + + PreviewCutVolume + PreviewCutVolume + + + + Cut Plane + Cut Plane + + + + Cut Plane options + Cut Plane options + + + + Wich side to cut + Wich side to cut + + + + Behind + Behind + + + + Front + 前视 + + + + Crossing point not found in profile. + + Crossing point not found in profile. + + + + + A list of angles for each roof pane + A list of angles for each roof pane + + + + A list of horizontal length projections for each roof pane + A list of horizontal length projections for each roof pane + + + + A list of IDs of relative profiles for each roof pane + A list of IDs of relative profiles for each roof pane + + + + A list of thicknesses for each roof pane + A list of thicknesses for each roof pane + + + + A list of overhangs for each roof pane + A list of overhangs for each roof pane + + + + A list of calculated heights for each roof pane + A list of calculated heights for each roof pane + + + + Angle (deg) + Angle (deg) + + + + Run (mm) + Run (mm) + + + + Thickness (mm) + Thickness (mm) + + + + Overhang (mm) + Overhang (mm) + + + + Height (mm) + Height (mm) + + + + Arch_3Views + + + 3 views from mesh + 3 views from mesh + + + + Creates 3 views (top, front, side) from a mesh-based object + Creates 3 views (top, front, side) from a mesh-based object + Arch_Add - + Add component 添加组件 - + Adds the selected components to the active object 将选定的组件添加到当前对象 @@ -886,12 +1223,12 @@ Arch_Axis - + Axis 轴线 - + Creates an axis system. 创建轴网系统. @@ -899,12 +1236,12 @@ Arch_Building - + Building 建筑 - + Creates a building object including selected objects. 创建建筑,包含选定对象 @@ -912,17 +1249,17 @@ Arch_Check - + Check 检查 - + Checks the selected objects for problems 检查所选对象的问题 - + Explore the contents of an Ifc file Explore the contents of an Ifc file @@ -930,18 +1267,41 @@ Arch_CloseHoles - + Close holes 封闭孔 - + Closes holes in open shapes, turning them solids 封闭开孔形体,转换为实体 - Arch_Fixture + Arch_CutPlane + + + Cut with plane + Cut with plane + + + + Cut an object with a plane + Cut an object with a plane + + + + Arch_Equipment + + + Equipment + Equipment + + + + Creates an equipment object from a selected object (Part or Mesh) + Creates an equipment object from a selected object (Part or Mesh) + Arch_Floor @@ -959,12 +1319,12 @@ Arch_Frame - + Frame - Frame + 框架 - + Creates a frame object from a planar 2D object and a profile Creates a frame object from a planar 2D object and a profile @@ -972,20 +1332,20 @@ Arch_IfcExplorer - + Ifc Explorer - Ifc Explorer + IFC导出 Arch_MergeWalls - + Merge Walls - Merge Walls + 合并壁 - + Merges the selected walls, if possible Merges the selected walls, if possible @@ -993,25 +1353,38 @@ Arch_MeshToShape - + Mesh to Shape 网格转换为形体 - + Turns selected meshes into Part Shape objects 转换所选网格为零件形体对象 - Arch_Rebar + Arch_Panel - - Rebar - Rebar + + Panel + Panel - + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + + + + Arch_Rebar + + + Rebar + 钢筋 + + + Creates a Reinforcement bar from the selected face of a structural object Creates a Reinforcement bar from the selected face of a structural object @@ -1019,12 +1392,12 @@ Arch_Remove - + Remove component 删除组件 - + Remove the selected components from their parents, or create a hole in a component 从父对象中删除选定组件,或在组件上创建孔 @@ -1032,12 +1405,12 @@ Arch_RemoveShape - + Remove Shape from Arch 从建筑元素中移除形体 - + Removes cubic shapes from Arch components 从建筑组件移除立方体 @@ -1045,25 +1418,25 @@ Arch_Roof - + Roof 屋顶 - - Creates a roof object from the selected face of an object - 从所选对象的面创建屋顶对象 + + Creates a roof object from the selected wire. + Creates a roof object from the selected wire. Arch_SectionPlane - + Section Plane 剖切平面 - + Creates a section plane object, including the selected objects 创建剖切平面对象,包括所选对象 @@ -1071,12 +1444,12 @@ Arch_SelectNonSolidMeshes - + Select non-manifold meshes 选择非流形网格 - + Selects all non-manifold meshes from the document or from the selected groups 选择文档中或所选组中的所有非流形网格 @@ -1084,12 +1457,12 @@ Arch_Site - + Site 场地 - + Creates a site object including selected objects. 创建场地,包含选定对象 @@ -1097,17 +1470,17 @@ Arch_Space - + Space - Space + 空间 - + Creates a space object from selected boundary objects Creates a space object from selected boundary objects - + Creates a stairs object Creates a stairs object @@ -1115,12 +1488,12 @@ Arch_SplitMesh - + Split Mesh 拆分网格 - + Splits selected meshes into independent components 将选定的网格拆分为独立组件 @@ -1128,20 +1501,20 @@ Arch_Stairs - + Stairs - Stairs + 楼梯 Arch_Structure - + Structure 结构 - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) 从零开始或从选定的对象(线,面或体)创建结构体 @@ -1149,25 +1522,38 @@ Arch_Survey - + Survey - Survey + 调查 - + Starts survey Starts survey + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Toggle IFC Brep flag + + + + Force an object to be exported as Brep or not + Force an object to be exported as Brep or not + + Arch_Wall - + Wall 墙 - + Creates a wall object from scratch or from a selected object (wire, face or solid) 从零开始或从选定的对象(线,面或体)创建墙体 @@ -1175,12 +1561,12 @@ Arch_Window - + Window 窗 - + Creates a window object from a selected object (wire, rectangle or sketch) 从所选对象创建窗对象(线框、矩形或草绘) @@ -1207,16 +1593,6 @@ IFC import 导入IFC - - - Creates groups for each Arch object type - 为每种建筑对象类别创建组 - - - - Group components by types - 根据类型组合组件 - 2D rendering @@ -1243,22 +1619,22 @@ Specifies how many times the viewed line thickness must be applied to cut lines - + Width: 宽度: - + Height: 高度: - + Color: - Color: + 颜色: - + Length: 长度: @@ -1305,7 +1681,7 @@ Snapping - Snapping + 对齐功能 @@ -1372,11 +1748,6 @@ Cut method Cut method - - - Import / export - Import / export - Check this to display debug messages while importing IFC files @@ -1389,74 +1760,44 @@ - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - - - - Force python parser - Force python parser - - - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - + Separate openings Separate openings - + If this is checked, object names will be prefixed with the IFC ID number If this is checked, object names will be prefixed with the IFC ID number - + Prefix names with ID number Prefix names with ID number - + Exclude list: Exclude list: - + A comma-separated list of Ifc entities to exclude from import A comma-separated list of Ifc entities to exclude from import - - Custom IFC schema (internal parser only) - Custom IFC schema (internal parser only) - - - + IFC export IFC export - + Scaling factor Scaling factor - - - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - - - - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - - - - Save a list of exported objects - Save a list of exported objects - Snap to baselines of Arch objects (override with CTRL) @@ -1473,7 +1814,7 @@ Walls - + mm mm @@ -1498,97 +1839,105 @@ 透明度: - - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - - - - Separate placements - Separate placements - - - - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - - - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. - - Force export as Breps - Force export as Breps - - - - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - - - - Join multi-solid objects - Join multi-solid objects - - - + Collada export Collada export - - WebGL export - WebGL export + + Hidden geomety pattern + Hidden geomety pattern - - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + This is the SVG stroke-dasharray property to apply to projections of hidden objects. - - Discretize wires - Discretize wires + + 30, 10 + 30, 10 + + + + Stairs + 楼梯 + + + + Number of steps: + Number of steps: + + + + Panels + Panels + + + + mm + mm + + + + Thickness + 厚度 + + + + IFC / DAE / WebGL + IFC / DAE / WebGL + + + + Force export as Brep + Force export as Brep + + + + Workbench + + + Arch tools + Arch tools + + + + Draft tools + Draft tools + + + + Draft mod tools + Draft mod tools arch - - Arch tools - 建筑工具 - - - - Draft tools - 草绘工具 - - - - Draft mod tools - 方案模式工具 - - - + &Architecture 建筑(&A) - + &Draft 绘图(&D) - + Utilities Utilities - + Snapping - Snapping + 对齐功能 diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm b/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm index f176fde148..db7740ff8d 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm and b/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts b/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts index 9d93cfaac7..4069eb248b 100644 --- a/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts +++ b/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts @@ -4,407 +4,362 @@ Arch - + Components 組件 - + Components of this object 此物件之組成 - + Axes 軸 - + Create Axis 建立軸 - + The intervals between axes 軸之間隔 - + The angles of each axis 各軸間之角度 - + The length of the axes 軸之長度 - + The size of the axis bubbles 軸之標示大小 - + Remove 移除 - + Add 新增 - + Axis 軸 - + Distance 距離 - + Angle 角度 - - Building - 建築物 - - - + Type conversion 轉換類型 - + Create Building 建立建築物 - + Floor 地面 - + removing sketch support to avoid cross-referencing 移除草圖基礎避免交叉參考 - - No objects are cut by the plane - 無以此平面切割之物件 - - - + is not closed 未封閉 - + is not valid 錯誤 - + doesn't contain any solid 未包含任何物體 - + contains a non-closed solid 包含一個未封閉物體 - + contains faces that are not part of any solid 具有非任何實體部份之面 - + Grouping 群組 - + Ungrouping 取消群組 - + Split Mesh 分割Mesh - + Mesh to Shape 形狀的網格 - + All good! no problems found 完全正確！沒有錯誤 - + Base component 基礎元件 - + Additions 增加 - + Subtractions 扣除 - + Objects 物件 - + closing Sketch edit 關閉素描編輯 - + The height of this floor 樓板高度 - + Roof 屋頂 - + Create Roof 建立屋頂 - + Unable to create a roof 無法建立屋頂 - - The angle of this roof - 屋頂角度 - - - + The face number of the base object used to build this roof 建立此屋頂之基礎物件面數 - + Page 頁 - + View of 視圖 - + Create Section Plane 建立剖面 - + The objects that must be considered by this section plane. Empty means all document 必須被此剖面所參考之物件，空白表示全部物件 - - The display size of this section plane - 此片段平面之顯示尺寸 - - - - No shape has been computed yet, select wireframe rendering and render again - 無任何造型已被計算,請選擇線架構 - - - + Skipping invalid object: 忽略錯誤物件： - - Site - 位置 - - - + Create Site 建立地點 - - Structure - 結構 - - - + Create Structure 建立結構 - + The length of this element, if not based on a profile 若無基於輪廓,此為元素之長 - + The width of this element, if not based on a profile 若無基於輪廓,此為元素之寬 - + The height or extrusion depth of this element. Keep 0 for automatic 此元素之高或擠壓深度自動保持為0 - + Axes systems this structure is built on 建構此結構之軸系統 - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) 此物件之垂直延展方向(保持0,0,0)自動垂直 - + The element numbers to exclude when this structure is based on axes 當此結構建立於軸上時排除元素於數量 - - Wall - 牆面 - - - + Create Wall 建立牆面 - + WallTrace 牆面圍繞 - + Wall options 牆面之設定 - + Width 寬度 - + Height 高度 - + Alignment 對齊 - + The width of this wall. Not used if this wall is based on a face 此牆寬度,若此牆基於面則不採用 - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid 此牆面之高度,自動時保持為0,若此牆面基於實體上則不啟用 - + The alignment of this wall on its base object, if applicable 若可行,將此牆面對齊至其基礎物件 - + Error: Invalid base object 錯誤：錯誤的基礎物件 - + This mesh is an invalid solid 此網格為無效實體 - - Window - 視窗 - - - + Create Window 建立窗戶 - + the components of this window 此窗之元件 - + Edit 編輯 - + Create/update component 建立/更新元件 - + Base 2D object 基礎 2D 物件 - + Wires 線 - + Create new component 建立新元件 - + Name 名稱 - + Type 類型 - + Thickness 厚度 - + Z offset Z方向偏移 @@ -419,71 +374,66 @@ 成功建立%s檔 - + Error: Couldn't determine character encoding 錯誤:無法定義字元編碼 - + Couldn't locate IfcOpenShell 無法找到IfcOpenShell - + IFC Schema not found, IFC import disabled. 找不到IFC架構,IFC匯入無法使用 - + successfully written 寫入成功 - + The numbering style 編號樣式 - + removing sketch external references to avoid cross-referencing 刪除草圖的外部參考，以避免交叉引用 - - Invalid cutplane - 無效切割面 - - - + Add space boundary Add space boundary - + Remove space boundary Remove space boundary - + Please select a base object Please select a base object - + Fixtures Fixtures - + Armatures Armatures - + The placement of this group The placement of this group @@ -493,169 +443,144 @@ Frame - + Create Frame Create Frame - - Rebar - 鋼筋 - - - + Create Rebar 建立鋼筋 - + Please select a base face on a structural object 請於結構物件上選取一個基礎面 - + Please select a base object 請選擇一個基礎物件 - - Section - 剖面 - - - + The placement of this object 此物件所在位置 - + The terrain of this site The terrain of this site - + The address of this site - The address of this site + 此處之地址 - + The geographic coordinates of this site 此地點的地理位置 - + An url that shows this site in a mapping website 顯示此地點於定位網站之網址 - - Space - Space - - - + Create Space Create Space - - A base shape defining this space - A base shape defining this space - - - + The objects that make the boundaries of this space object The objects that make the boundaries of this space object - - Stairs - 樓梯 - - - + Create Stairs 建立樓梯 - + The length of these stairs, if no baseline is defined The length of these stairs, if no baseline is defined - + The width of these stairs 樓梯之寬度 - + The total height of these stairs 樓梯之總高 - + The alignment of these stairs on their baseline, if applicable The alignment of these stairs on their baseline, if applicable - + The number of risers in these stairs The number of risers in these stairs - + The depth of the treads of these stairs The depth of the treads of these stairs - + The height of the risers of these stairs The height of the risers of these stairs - + The size of the nosing The size of the nosing - + The thickness of the treads The thickness of the treads - + The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in The Blondel ratio, must be between 62 and 64cm or 24.5 and 25.5in - + The type of landings of these stairs The type of landings of these stairs - + The type of winders in these stairs The type of winders in these stairs - + The type of structure of these stairs The type of structure of these stairs - + The thickness of the massive structure or of the stringers The thickness of the massive structure or of the stringers - + The width of the stringers The width of the stringers - + The offset between the border of the stairs and the structure The offset between the border of the stairs and the structure @@ -670,139 +595,124 @@ 鋼 - + Structure options 結構選項 - + Preset 預設 - + Length 長度 - + Rotate 旋轉 - + Con&tinue 連續 - + An optional extrusion path for this element An optional extrusion path for this element - + Armatures contained in this element Armatures contained in this element - - The role of this structural element - The role of this structural element - - - + The structural nodes of this element The structural nodes of this element - + Error: The base shape couldn't be extruded along this tool object Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape Couldn't compute a shape - + Merge Wall 合併牆面 - + The selected wall contain no subwall to merge 所選面並未包含可合併的次牆面 - + Please select only wall objects 請僅選擇牆面物件 - + Merge Walls 合併牆面 - + The length of this wall. Not used if this wall is based on an underlying object The length of this wall. Not used if this wall is based on an underlying object - + The face number of the base object used to build this wall The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) The offset between this wall and its baseline (only for left and right alignments) - + Pick a face on an existing object or select a preset Pick a face on an existing object or select a preset - + Window options 窗戶選項 - + The depth of the hole that this window makes in its host object. Keep 0 for automatic. The depth of the hole that this window makes in its host object. Keep 0 for automatic. - - an optional volume to be subtracted from hosts of this window - an optional volume to be subtracted from hosts of this window - - - + The width of this window (for preset windows only) 此扇窗之寬度(僅對預設窗) - + The height of this window (for preset windows only) 此扇窗之高度(僅對預設窗) - + The normal direction of this window 此窗戶之法線方向 - - The role of this window - The role of this window - - - + Unable to create component 無法建立元件 @@ -815,45 +725,35 @@ - + IfcOpenShell not found or disabled, falling back on internal parser. IfcOpenShell not found or disabled, falling back on internal parser. - + Distances (mm) and angles (deg) between axes Distances (mm) and angles (deg) between axes - + Error computing the shape of this object Error computing the shape of this object - - StructuralSystem - 結構系統 - - - + Create Structural System 建立結構系統 - - The role of this wall - The role of this wall - - - + Error: IfcOpenShell is not installed 錯誤: 未安裝 IfcOpenShell - + Error: your IfcOpenShell version is too old 錯誤:IfcOpenShell為舊版 @@ -865,16 +765,455 @@ Found a shape containing curves, triangulating + + + Invalid cutplane + + Invalid cutplane + + + + + No objects are cut by the plane + + No objects are cut by the plane + + + + + Object doesn't have settable IFC Attributes + Object doesn't have settable IFC Attributes + + + + Disabling Brep force flag of object + Disabling Brep force flag of object + + + + Enabling Brep force flag of object + Enabling Brep force flag of object + + + + The base object this component is built upon + The base object this component is built upon + + + + Other shapes that are appended to this object + Other shapes that are appended to this object + + + + Other shapes that are subtracted from this object + Other shapes that are subtracted from this object + + + + An optional description for this component + An optional description for this component + + + + An optional tag for this component + An optional tag for this component + + + + Custom IFC properties and attributes + Custom IFC properties and attributes + + + + A material for this object + A material for this object + + + + The role of this object + The role of this object + + + + Specifies if this object must move together when its host is moved + Specifies if this object must move together when its host is moved + + + + has no solid + has no solid + + + + has an invalid shape + has an invalid shape + + + + has a null shape + has a null shape + + + + Cutting + Cutting + + + + You must select a base object first! + You must select a base object first! + + + + Create Equipment + Create Equipment + + + + You must select exactly one base object + You must select exactly one base object + + + + The selected object must be a mesh + The selected object must be a mesh + + + + This mesh has more than 1000 facets. + This mesh has more than 1000 facets. + + + + This operation can take a long time. Proceed? + This operation can take a long time. Proceed? + + + + The mesh has more than 500 facets. This will take a couple of minutes... + The mesh has more than 500 facets. This will take a couple of minutes... + + + + Create 3 views + Create 3 views + + + + an optional 2D shape representing a top view of this equipment + an optional 2D shape representing a top view of this equipment + + + + an optional 2D shape representing a front view of this equipment + an optional 2D shape representing a front view of this equipment + + + + an optional 2D shape representing a side view of this equipment + an optional 2D shape representing a side view of this equipment + + + + The model description of this equipment + The model description of this equipment + + + + The url of the product page of this equipment + The url of the product page of this equipment + + + + Create Panel + Create Panel + + + + Panel options + Panel options + + + + The thickness or extrusion depth of this element + The thickness or extrusion depth of this element + + + + The number of sheets to use + The number of sheets to use + + + + The offset between this panel and its baseline + The offset between this panel and its baseline + + + + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + Parameters of the profiles of the roof: +* Angle : slope in degrees compared to the horizontal one. +* Run : outdistance between the wall and the ridge sheathing. +* Thickness : thickness of the side of roof. +* Overhang : outdistance between the sewer and the wall. +* Height : height of the ridge sheathing (calculated automatically) +* IdRel : Relative Id for calculations automatic. +--- +If Angle = 0 and Run = 0 then profile is identical to the relative profile. +If Angle = 0 then angle is calculated so that the height is the same one as the relative profile. +If Run = 0 then Run is calculated so that the height is the same one as the relative profile. + + + + Id + Id + + + + IdRel + IdRel + + + + If false, non-solids will be cut too, with possible wrong results. + If false, non-solids will be cut too, with possible wrong results. + + + + The display length of this section plane + The display length of this section plane + + + + The display height of this section plane + The display height of this section plane + + + + The size of the arrows of this section plane + The size of the arrows of this section plane + + + + The computed floor area of this space + The computed floor area of this space + + + + The finishing of the floor of this space + The finishing of the floor of this space + + + + The finishing of the walls of this space + The finishing of the walls of this space + + + + The finishing of the ceiling of this space + The finishing of the ceiling of this space + + + + Objects that are included inside this space, such as furniture + Objects that are included inside this space, such as furniture + + + + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + + + + The name of the font + The name of the font + + + + The color of the area text + The color of the area text + + + + The size of the text font + The size of the text font + + + + The size of the first line of text + The size of the first line of text + + + + The space between the lines of text + The space between the lines of text + + + + The position of the text. Leave (0,0,0) for automatic position + The position of the text. Leave (0,0,0) for automatic position + + + + The justification of the text + The justification of the text + + + + The number of decimals to use for calculated texts + The number of decimals to use for calculated texts + + + + Show the unit suffix + Show the unit suffix + + + + A description of the standard profile this element is based upon + A description of the standard profile this element is based upon + + + + Sill height + Sill height + + + + CutVolume + CutVolume + + + + CutPlane + CutPlane + + + + PreviewCutVolume + PreviewCutVolume + + + + Cut Plane + Cut Plane + + + + Cut Plane options + Cut Plane options + + + + Wich side to cut + Wich side to cut + + + + Behind + Behind + + + + Front + 前視圖 + + + + Crossing point not found in profile. + + Crossing point not found in profile. + + + + + A list of angles for each roof pane + A list of angles for each roof pane + + + + A list of horizontal length projections for each roof pane + A list of horizontal length projections for each roof pane + + + + A list of IDs of relative profiles for each roof pane + A list of IDs of relative profiles for each roof pane + + + + A list of thicknesses for each roof pane + A list of thicknesses for each roof pane + + + + A list of overhangs for each roof pane + A list of overhangs for each roof pane + + + + A list of calculated heights for each roof pane + A list of calculated heights for each roof pane + + + + Angle (deg) + Angle (deg) + + + + Run (mm) + Run (mm) + + + + Thickness (mm) + Thickness (mm) + + + + Overhang (mm) + Overhang (mm) + + + + Height (mm) + Height (mm) + + + + Arch_3Views + + + 3 views from mesh + 3 views from mesh + + + + Creates 3 views (top, front, side) from a mesh-based object + Creates 3 views (top, front, side) from a mesh-based object + Arch_Add - + Add component 增加組件 - + Adds the selected components to the active object 增加選定組件至目前物件 @@ -882,12 +1221,12 @@ Arch_Axis - + Axis 軸 - + Creates an axis system. 建立圖軸系統 @@ -895,12 +1234,12 @@ Arch_Building - + Building 建築物 - + Creates a building object including selected objects. 建立包含選定物件之建築物件 @@ -908,17 +1247,17 @@ Arch_Check - + Check 確認 - + Checks the selected objects for problems 檢查所選物件之問題 - + Explore the contents of an Ifc file Explore the contents of an Ifc file @@ -926,18 +1265,41 @@ Arch_CloseHoles - + Close holes 封閉空洞 - + Closes holes in open shapes, turning them solids 於封閉開口之造型並轉為實體 - Arch_Fixture + Arch_CutPlane + + + Cut with plane + Cut with plane + + + + Cut an object with a plane + Cut an object with a plane + + + + Arch_Equipment + + + Equipment + Equipment + + + + Creates an equipment object from a selected object (Part or Mesh) + Creates an equipment object from a selected object (Part or Mesh) + Arch_Floor @@ -955,12 +1317,12 @@ Arch_Frame - + Frame Frame - + Creates a frame object from a planar 2D object and a profile Creates a frame object from a planar 2D object and a profile @@ -968,7 +1330,7 @@ Arch_IfcExplorer - + Ifc Explorer Ifc 瀏覽器 @@ -976,12 +1338,12 @@ Arch_MergeWalls - + Merge Walls 合併牆面 - + Merges the selected walls, if possible 若可行合併所選牆面 @@ -989,25 +1351,38 @@ Arch_MeshToShape - + Mesh to Shape 形狀的網格 - + Turns selected meshes into Part Shape objects 轉換選定之網格為零件造型物件 + + Arch_Panel + + + Panel + Panel + + + + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + Creates a panel object from scratch or from a selected object (sketch, wire, face or solid) + + Arch_Rebar - + Rebar 鋼筋 - + Creates a Reinforcement bar from the selected face of a structural object Creates a Reinforcement bar from the selected face of a structural object @@ -1015,12 +1390,12 @@ Arch_Remove - + Remove component 移除原件 - + Remove the selected components from their parents, or create a hole in a component 由其家族中移除選定物件或於物建中建立空洞 @@ -1028,12 +1403,12 @@ Arch_RemoveShape - + Remove Shape from Arch 由建築中移除造型 - + Removes cubic shapes from Arch components 移除建築元件中之方塊形狀 @@ -1041,25 +1416,25 @@ Arch_Roof - + Roof 屋頂 - - Creates a roof object from the selected face of an object - 由選定物件之面建立屋頂物件 + + Creates a roof object from the selected wire. + Creates a roof object from the selected wire. Arch_SectionPlane - + Section Plane 剖面 - + Creates a section plane object, including the selected objects 建立剖面物件,包含選擇的物件 @@ -1067,12 +1442,12 @@ Arch_SelectNonSolidMeshes - + Select non-manifold meshes 選擇非重疊網格 - + Selects all non-manifold meshes from the document or from the selected groups 由檔案或所選之群組中選取所有非重疊網格 @@ -1080,12 +1455,12 @@ Arch_Site - + Site 位置 - + Creates a site object including selected objects. 建立包含選定物件之位置物件 @@ -1093,17 +1468,17 @@ Arch_Space - + Space Space - + Creates a space object from selected boundary objects Creates a space object from selected boundary objects - + Creates a stairs object 建立一個樓梯物件 @@ -1111,12 +1486,12 @@ Arch_SplitMesh - + Split Mesh 分割Mesh - + Splits selected meshes into independent components 分割選定Mesh為獨立物件 @@ -1124,7 +1499,7 @@ Arch_Stairs - + Stairs 樓梯 @@ -1132,12 +1507,12 @@ Arch_Structure - + Structure 結構 - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) 由草圖或選定物件(草圖,線,面或固體)建立結構物件 @@ -1145,25 +1520,38 @@ Arch_Survey - + Survey 查詢 - + Starts survey 開始查詢 + + Arch_ToggleIfcBrepFlag + + + Toggle IFC Brep flag + Toggle IFC Brep flag + + + + Force an object to be exported as Brep or not + Force an object to be exported as Brep or not + + Arch_Wall - + Wall 牆面 - + Creates a wall object from scratch or from a selected object (wire, face or solid) 由草圖或選定物件(線,面或固體)建立牆面物件 @@ -1171,12 +1559,12 @@ Arch_Window - + Window 視窗 - + Creates a window object from a selected object (wire, rectangle or sketch) 由選定之物件(線,矩形或素描)建立窗戶物件 @@ -1203,16 +1591,6 @@ IFC import IFC匯入 - - - Creates groups for each Arch object type - 為每個建築物件類別建立群組 - - - - Group components by types - 依型式歸類元件 - 2D rendering @@ -1239,22 +1617,22 @@ 指定提供切割線之可視線寬倍數 - + Width: 寬度: - + Height: 高度: - + Color: 色彩: - + Length: 長度: @@ -1368,11 +1746,6 @@ Cut method 切割方法 - - - Import / export - 匯入/匯出 - Check this to display debug messages while importing IFC files @@ -1385,74 +1758,44 @@ - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - If this is checked, IFC files will always be imported with the internal python parser, even if IfcOpenShell is installed - - - - Force python parser - Force python parser - - - If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted If this is checked, openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - + Separate openings Separate openings - + If this is checked, object names will be prefixed with the IFC ID number If this is checked, object names will be prefixed with the IFC ID number - + Prefix names with ID number Prefix names with ID number - + Exclude list: 排除清單： - + A comma-separated list of Ifc entities to exclude from import A comma-separated list of Ifc entities to exclude from import - - Custom IFC schema (internal parser only) - Custom IFC schema (internal parser only) - - - + IFC export IFC匯出 - + Scaling factor 縮放係數 - - - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - IFC files are typically written in millimeters. If you are working in a different unit, this allow you to scale all your units to be expressed in millimeters. - - - - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - If this is checked, a text file will be exported together with the ifc file, containing the list of exported objects, for verification purposes. - - - - Save a list of exported objects - 儲存匯出物件清單 - Snap to baselines of Arch objects (override with CTRL) @@ -1469,7 +1812,7 @@ 牆面 - + mm  mm @@ -1494,95 +1837,103 @@ 透明度： - - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - If this is checked, placements will be recomputed and applied to the objects as they were in the IFC file (slower) - - - - Separate placements - 分別配置 - - - - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - IfcBuildingElementProxy,IfcFlowTerminal,IfcFurnishingElement - - - + Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. - - Force export as Breps - Force export as Breps - - - - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - <html><head/><body><p>Objects containing multiple solids are normally exported as multiple representations. Some applications don't like that,though. You can use this option to unite these solids into one.</p></body></html> - - - - Join multi-solid objects - Join multi-solid objects - - - + Collada export 匯出Collada - - WebGL export - 匯出WebGL + + Hidden geomety pattern + Hidden geomety pattern - - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. - If this is checked, wires will be discretized, which results in more accurate curves, but heavier files. + + This is the SVG stroke-dasharray property to apply to projections of hidden objects. + This is the SVG stroke-dasharray property to apply to projections of hidden objects. - - Discretize wires - 離散曲線 + + 30, 10 + 30, 10 + + + + Stairs + 樓梯 + + + + Number of steps: + Number of steps: + + + + Panels + Panels + + + + mm + mm + + + + Thickness + 厚度 + + + + IFC / DAE / WebGL + IFC / DAE / WebGL + + + + Force export as Brep + Force export as Brep + + + + Workbench + + + Arch tools + Arch tools + + + + Draft tools + Draft tools + + + + Draft mod tools + Draft mod tools arch - - Arch tools - 建築工具 - - - - Draft tools - 草圖工具 - - - - Draft mod tools - 草圖模式工具 - - - + &Architecture &建築 - + &Draft &草圖 - + Utilities 功能 - + Snapping 對齊 diff --git a/src/Mod/Assembly/Gui/Resources/Assembly.qrc b/src/Mod/Assembly/Gui/Resources/Assembly.qrc index 96d346bcbb..81b1071ac0 100644 --- a/src/Mod/Assembly/Gui/Resources/Assembly.qrc +++ b/src/Mod/Assembly/Gui/Resources/Assembly.qrc @@ -24,5 +24,6 @@ translations/Assembly_ro.qm translations/Assembly_hu.qm translations/Assembly_pt-PT.qm + translations/Assembly_sr.qm diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_de.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_de.qm index a1ee9895cd..d88a7262c1 100644 Binary files a/src/Mod/Assembly/Gui/Resources/translations/Assembly_de.qm and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_de.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_de.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_de.ts index 22a4a09977..3d10c21a34 100644 --- a/src/Mod/Assembly/Gui/Resources/translations/Assembly_de.ts +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_de.ts @@ -1,6 +1,6 @@ - + AssemblyGui::Workbench diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_sr.qm b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sr.qm new file mode 100644 index 0000000000..885683b6f9 Binary files /dev/null and b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sr.qm differ diff --git a/src/Mod/Assembly/Gui/Resources/translations/Assembly_sr.ts b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sr.ts new file mode 100644 index 0000000000..34ba1e8204 --- /dev/null +++ b/src/Mod/Assembly/Gui/Resources/translations/Assembly_sr.ts @@ -0,0 +1,37 @@ + + + + + AssemblyGui::Workbench + + + Assembly + Скупштина + + + + CmdAssemblyConstraintAxle + + + Assembly + Скупштина + + + + Constraint Axle... + Осовина ограничења... + + + + set a axle constraint between two objects + поставите осовину ограничења између два објекта + + + + Workbench + + Assembly + Скупштина + + + diff --git a/src/Mod/Complete/Gui/Resources/Complete.qrc b/src/Mod/Complete/Gui/Resources/Complete.qrc index c8808b9193..d5d18cd9d4 100644 --- a/src/Mod/Complete/Gui/Resources/Complete.qrc +++ b/src/Mod/Complete/Gui/Resources/Complete.qrc @@ -23,5 +23,6 @@ translations/Complete_ro.qm translations/Complete_hu.qm translations/Complete_pt-PT.qm + translations/Complete_sr.qm diff --git a/src/Mod/Complete/Gui/Resources/translations/Complete_de.qm b/src/Mod/Complete/Gui/Resources/translations/Complete_de.qm index 1e1338f156..6bc687515b 100644 Binary files a/src/Mod/Complete/Gui/Resources/translations/Complete_de.qm and b/src/Mod/Complete/Gui/Resources/translations/Complete_de.qm differ diff --git a/src/Mod/Complete/Gui/Resources/translations/Complete_de.ts b/src/Mod/Complete/Gui/Resources/translations/Complete_de.ts index 048b7c2f86..b15c833f67 100644 --- a/src/Mod/Complete/Gui/Resources/translations/Complete_de.ts +++ b/src/Mod/Complete/Gui/Resources/translations/Complete_de.ts @@ -1,6 +1,6 @@ - + CmdCompleteConstraintAxle @@ -37,7 +37,7 @@ Dr&awing - Zeic&hnen + Zeic&hnung diff --git a/src/Mod/Complete/Gui/Resources/translations/Complete_fi.qm b/src/Mod/Complete/Gui/Resources/translations/Complete_fi.qm index 119a10d37c..faa715bc3d 100644 Binary files a/src/Mod/Complete/Gui/Resources/translations/Complete_fi.qm and b/src/Mod/Complete/Gui/Resources/translations/Complete_fi.qm differ diff --git a/src/Mod/Complete/Gui/Resources/translations/Complete_fi.ts b/src/Mod/Complete/Gui/Resources/translations/Complete_fi.ts index a6eec3db8c..c5546f1b7e 100644 --- a/src/Mod/Complete/Gui/Resources/translations/Complete_fi.ts +++ b/src/Mod/Complete/Gui/Resources/translations/Complete_fi.ts @@ -29,7 +29,7 @@ Runs a self-test to check if the application works properly - Suoritetaan itsetestauksen tarkistaminen, jos sovellus toimii oikein + Suoritetaan itsetestaus ja tarkistetaan, toimiiko sovellus oikein @@ -57,12 +57,12 @@ Sketch based - Sketsin perusta + Luonnokseen perustuva Primitives - Primitiivi + Perusalkiot Parametric @@ -71,7 +71,7 @@ Object appearence - Objektin ulkoasu + Kohteen ulkoasu diff --git a/src/Mod/Complete/Gui/Resources/translations/Complete_nl.qm b/src/Mod/Complete/Gui/Resources/translations/Complete_nl.qm index d9c4e1577a..77791c5be5 100644 Binary files a/src/Mod/Complete/Gui/Resources/translations/Complete_nl.qm and b/src/Mod/Complete/Gui/Resources/translations/Complete_nl.qm differ diff --git a/src/Mod/Complete/Gui/Resources/translations/Complete_nl.ts b/src/Mod/Complete/Gui/Resources/translations/Complete_nl.ts index efd056d45a..931a7a3bff 100644 --- a/src/Mod/Complete/Gui/Resources/translations/Complete_nl.ts +++ b/src/Mod/Complete/Gui/Resources/translations/Complete_nl.ts @@ -37,7 +37,7 @@ Dr&awing - Dr&awing + &Tekening diff --git a/src/Mod/Complete/Gui/Resources/translations/Complete_sr.qm b/src/Mod/Complete/Gui/Resources/translations/Complete_sr.qm new file mode 100644 index 0000000000..0264b09222 Binary files /dev/null and b/src/Mod/Complete/Gui/Resources/translations/Complete_sr.qm differ diff --git a/src/Mod/Complete/Gui/Resources/translations/Complete_sr.ts b/src/Mod/Complete/Gui/Resources/translations/Complete_sr.ts new file mode 100644 index 0000000000..35c7eed6cf --- /dev/null +++ b/src/Mod/Complete/Gui/Resources/translations/Complete_sr.ts @@ -0,0 +1,82 @@ + + + + + CmdCompleteConstraintAxle + + + Complete + Комплетан + + + + Constraint Axle... + Осовина ограничења + + + + set a axle constraint between two objects + поставите осовину ограничења између два објекта + + + + Test_Test + + + Self-test... + Самопровера... + + + + Runs a self-test to check if the application works properly + Извршава самопроверу да утврди да ли апликација ради исправно + + + + Workbench + + + Dr&awing + Цр&теж + + + + S&ketch + С&кица + + + + &Raytracing + И Праћење снопа + + + + &Drafting + И Недовршено + + + + Sketch based + на основу скице + + + + Primitives + Примитиви + + + Parametric + Параметарски + + + + Object appearence + Изглед објекта + + + + Wire Tools + Алати за Жицу + + + diff --git a/src/Mod/Draft/Resources/Draft.qrc b/src/Mod/Draft/Resources/Draft.qrc index 047b313a5a..24ff6deb3e 100644 --- a/src/Mod/Draft/Resources/Draft.qrc +++ b/src/Mod/Draft/Resources/Draft.qrc @@ -94,6 +94,7 @@ translations/Draft_zh-CN.qm translations/Draft_ro.qm translations/Draft_pt-PT.qm + translations/Draft_sr.qm ui/userprefs-base.ui ui/userprefs-snap.ui ui/userprefs-import1.ui diff --git a/src/Mod/Draft/Resources/translations/Draft_af.qm b/src/Mod/Draft/Resources/translations/Draft_af.qm index 5faf3a44b6..145046e3e9 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_af.qm and b/src/Mod/Draft/Resources/translations/Draft_af.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_af.ts b/src/Mod/Draft/Resources/translations/Draft_af.ts index 056123f2d4..ec84f617f5 100644 --- a/src/Mod/Draft/Resources/translations/Draft_af.ts +++ b/src/Mod/Draft/Resources/translations/Draft_af.ts @@ -1,15 +1,29 @@ + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + + Draft_AddPoint - + Add Point Voeg by nuwe punt - + Adds a point to an existing wire/bspline Voeg 'n punt by 'n bestaande draad/bspline @@ -17,12 +31,12 @@ Draft_AddToGroup - + Add to group... Voeg by groep ... - + Adds the selected object(s) to an existing group Voeg die geselekteerde voorwerp(e) by 'n bestaande groep @@ -30,12 +44,12 @@ Draft_ApplyStyle - + Apply Current Style Pas huidige styl toe - + Applies current line width and color to selected objects Wend aan huidige lynbreedte en kleur op gekose voorwerpe @@ -43,12 +57,12 @@ Draft_Arc - + Arc Boog - + Creates an arc. CTRL to snap, SHIFT to constrain Skep 'n boog. CTRL vas te heg, SHIFT om vas te hou @@ -56,12 +70,12 @@ Draft_Array - + Array Reeks - + Creates a polar or rectangular array from a selected object Skep 'n polêre of reghoekige reeks van 'n gekose voorwerp @@ -69,12 +83,12 @@ Draft_BSpline - + B-Spline B-Kurwe - + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain Skep 'n veelvuldige-punt kurwe. CTRL om vas te heg, SHIFT om vas te hou @@ -95,12 +109,12 @@ Draft_Circle - + Circle Sirkel - + Creates a circle. CTRL to snap, ALT to select tangent objects Skep 'n sirkel. CTRL om vas te heg, ALT om raaklyn voorwerpe te kies @@ -108,12 +122,12 @@ Draft_Clone - + Clone Kloon - + Clones the selected object(s) Kloon die gekose voorwerp(e) @@ -121,12 +135,12 @@ Draft_CloseLine - + Close Line Maak lyn toe - + Closes the line being drawn Maak die huidige lyn toe @@ -134,12 +148,12 @@ Draft_DelPoint - + Remove Point Verwyder punt - + Removes a point from an existing wire or bspline Verwyder 'n punt van 'n bestaande draadwerk of bspline @@ -147,12 +161,12 @@ Draft_Dimension - + Dimension Dimensioneer - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Skep 'n dimensie. CTRL om vas te het, SHIFT om vas te hou, ALT om 'n segment te kies @@ -160,12 +174,12 @@ Draft_Downgrade - + Downgrade Gradeer neer - + Explodes the selected objects into simpler objects, or subtract faces Fragmenteer die geselekteerde voorwerpe na eenvoudiger voorwerpe, of verwyder vlakke @@ -173,7 +187,7 @@ Draft_Draft2Sketch - + Draft to Sketch Konsep na skets @@ -181,12 +195,12 @@ Draft_Drawing - + Drawing Tekening - + Puts the selected objects on a Drawing sheet. Sit die gekose voorwerpe op 'n tekenblad. @@ -194,12 +208,12 @@ Draft_Edit - + Edit Wysig - + Edits the active object Wysig die aktiewe voorwerp @@ -207,12 +221,12 @@ Draft_Ellipse - + Ellipse Ellipse - + Creates an ellipse. CTRL to snap Creates an ellipse. CTRL to snap @@ -220,12 +234,12 @@ Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) Creates a facebinder object from selected face(s) @@ -233,12 +247,12 @@ Draft_FinishLine - + Finish line Beëindig lyn - + Finishes a line without closing it Beëindig lyn sonder om toe te maak @@ -246,12 +260,12 @@ Draft_FlipDimension - + Flip Dimension Flip Dimension - + Flip the normal direction of a dimension Flip the normal direction of a dimension @@ -259,38 +273,25 @@ Draft_Heal - + Heal Heal - - Heal faultly Draft objects saved from an earlier FreeCAD version - Heal faultly Draft objects saved from an earlier FreeCAD version - - - - Draft_Layer - - - Layer - Layer - - - - Adds a layer - Adds a layer + + Heal faulty Draft objects saved from an earlier FreeCAD version + Heal faulty Draft objects saved from an earlier FreeCAD version Draft_Line - + Line Lyn - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Dit skep 'n 2-punt lyn. CTRL om vas te heg, SHIFT vas te hou @@ -298,12 +299,12 @@ Draft_Move - + Move Verskuif - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy Beweeg die gekose voorwerpe tussen 2 punte. CTRL om vas te heg, SHIFT om vas te hou, ALT om te kopieer @@ -311,12 +312,12 @@ Draft_Offset - + Offset Verplasing - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Verplaas die aktiewe voorwerp. CTRL om vas te heg, SHIFT om vas te hou, ALT om te kopieer @@ -324,12 +325,12 @@ Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. Creates copies of a selected object along a selected path. @@ -337,12 +338,12 @@ Draft_Point - + Point Punt - + Creates a point object Skep 'n puntvoorwerp @@ -350,12 +351,12 @@ Draft_Polygon - + Polygon Veelhoek - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Skep 'n gelykhoekige veelhoek. CTRL om vas te heg, SHIFT om vas te hou @@ -363,12 +364,12 @@ Draft_Rectangle - + Rectangle Reghoek - + Creates a 2-point rectangle. CTRL to snap Skep 'n 2-punt reghoek. CTRL om vas te heg @@ -376,12 +377,12 @@ Draft_Rotate - + Rotate Roteer - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Roteer die gekose objekte. CTRL om vas te heg, SHIFT om vas te hou, ALT om te kopieer @@ -389,12 +390,12 @@ Draft_Scale - + Scale Skaal - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Skaal die gekose objekte van 'n basispunt. CTRL om vas te hou, SHIFT om vas te hou, ALT om te kopieer @@ -402,12 +403,12 @@ Draft_SelectGroup - + Select group Kies groep - + Selects all objects with the same parents as this group Kies al die voorwerpe met die dieselfde ouers as hierdie groep @@ -415,12 +416,12 @@ Draft_SelectPlane - + SelectPlane KiesVlak - + Select a working plane for geometry creation Kies 'n werkende vliegtuig vir geometrieskepping @@ -428,17 +429,17 @@ Draft_Shape2DView - + Shape 2D view Vorm 2D aansig - + Creates Shape 2D views of selected objects Skep vorm 2D aansigte van die gekose voorwerpe - + Convert bidirectionally between Draft and Sketch objects Convert bidirectionally between Draft and Sketch objects @@ -446,12 +447,12 @@ Draft_ShapeString - + Shape from text... Shape from text... - + Creates text string in shapes. Creates text string in shapes. @@ -459,12 +460,12 @@ Draft_ShowSnapBar - + Show Snap Bar Show Snap Bar - + Shows Draft snap toolbar Shows Draft snap toolbar @@ -472,12 +473,12 @@ Draft_Snap_Angle - + Angles Angles - + Snaps to 45 and 90 degrees points on arcs and circles Snaps to 45 and 90 degrees points on arcs and circles @@ -485,12 +486,12 @@ Draft_Snap_Center - + Center Center - + Snaps to center of circles and arcs Snaps to center of circles and arcs @@ -498,12 +499,12 @@ Draft_Snap_Dimensions - + Dimensions Dimensions - + Shows temporary dimensions when snapping to Arch objects Shows temporary dimensions when snapping to Arch objects @@ -511,12 +512,12 @@ Draft_Snap_Endpoint - + Endpoint Endpoint - + Snaps to endpoints of edges Snaps to endpoints of edges @@ -524,12 +525,12 @@ Draft_Snap_Extension - + Extension Extension - + Snaps to extension of edges Snaps to extension of edges @@ -537,12 +538,12 @@ Draft_Snap_Grid - + Grid Grid - + Snaps to grid points Snaps to grid points @@ -550,12 +551,12 @@ Draft_Snap_Intersection - + Intersection Snyding - + Snaps to edges intersections Snaps to edges intersections @@ -563,12 +564,12 @@ Draft_Snap_Lock - + Toggle On/Off Toggle On/Off - + Activates/deactivates all snap tools at once Activates/deactivates all snap tools at once @@ -576,12 +577,12 @@ Draft_Snap_Midpoint - + Midpoint Midpoint - + Snaps to midpoints of edges Snaps to midpoints of edges @@ -589,12 +590,12 @@ Draft_Snap_Near - + Nearest Nearest - + Snaps to nearest point on edges Snaps to nearest point on edges @@ -602,12 +603,12 @@ Draft_Snap_Ortho - + Ortho Ortho - + Snaps to orthogonal and 45 degrees directions Snaps to orthogonal and 45 degrees directions @@ -615,12 +616,12 @@ Draft_Snap_Parallel - + Parallel Parallel - + Snaps to parallel directions of edges Snaps to parallel directions of edges @@ -628,12 +629,12 @@ Draft_Snap_Perpendicular - + Perpendicular Perpendicular - + Snaps to perpendicular points on edges Snaps to perpendicular points on edges @@ -641,12 +642,12 @@ Draft_Snap_WorkingPlane - + Working Plane Working Plane - + Restricts the snapped point to the current working plane Restricts the snapped point to the current working plane @@ -654,12 +655,12 @@ Draft_Text - + Text Teks - + Creates an annotation. CTRL to snap Skep 'n aantekening. CTRL om vas te heg @@ -667,12 +668,12 @@ Draft_ToggleConstructionMode - + Toggle construcion Mode Skakel Konstruksiemodus aan/af - + Toggles the Construction Mode for next objects. Skakel konstruksiemodus aan/af vir die volgende voorwerpe. @@ -680,12 +681,12 @@ Draft_ToggleContinueMode - + Toggle Continue Mode Toggle Continue Mode - + Toggles the Continue Mode for next commands. Wissel die voortsettingsmodus vir die volgende bevele. @@ -693,12 +694,12 @@ Draft_ToggleDisplayMode - + Toggle display mode Wissel voorkomsmodus - + Swaps display mode of selected objects between wireframe and flatlines Verander vertoning van gekose voorwerpe tussen draadmodel en plat lyne @@ -706,25 +707,25 @@ Draft_ToggleGrid - + Toggle Grid Toggle Grid - - Toggles the Draft gid on/off - Toggles the Draft gid on/off + + Toggles the Draft grid on/off + Toggles the Draft grid on/off Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Knip of rek die gekose voorwerp, of strek 'n enkele vlak. CTRL heg, SHIFT beperk tot huidige segment of tot die normaallyn, ALT keer om @@ -732,12 +733,12 @@ Draft_UndoLine - + Undo last segment Herstel die laaste segment - + Undoes the last drawn segment of the line being drawn Herstel die laaste getekende lynsegment @@ -745,25 +746,38 @@ Draft_Upgrade - + Upgrade Opgradeer - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces Smelt die gekose voorwerpe saam in een, of verander geslote drade in gevulde vlakke, of verenig vlakke + + Draft_VisGroup + + + VisGroup + VisGroup + + + + Adds a VisGroup + Adds a VisGroup + + Draft_Wire - + DWire DWire - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain @@ -771,12 +785,12 @@ Draft_WireToBSpline - + Wire to BSpline Draadwerk na Bspline - + Converts between Wire and BSpline Wissel tussen Draadwerk en BSpline @@ -804,17 +818,17 @@ die versuimkleur vir vashegsimbole - + This is the default color for objects being drawn while in construction mode. Dit is die versuimkleur vir voorwerpe wat geteken word in konstruksiemodus. - + This is the default group name for construction geometry Dit is die versuim groepnaam vir die konstruksiegeometrie - + Construction Konstruksie @@ -917,17 +931,17 @@ such as "Arial:Bold" Oorspronklike kleur en lynwydte - + if this is checked, paper space objects will be imported too indien dit gekies is, sal papierruimte voorwerpe ook ingevoer word - + if this is unchecked, texts/mtexts won't be imported as dit afgeskakel is, sal tekste/mtekste nie ingevoer word nie - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. Wanneer komplekse lyne eksporteer word na DXF, word hulle omskep in veelvuldige lynsegmente. Hierdie waarde is die maksimum lengte van elkeen van hierdie lynsegmente. Indien 0, word die oorspronklike komplekse lyn beskou as 'n reguit segment. @@ -952,7 +966,7 @@ such as "Arial:Bold" Algemene instellings - + Construction group name Konstruksie groepnaam @@ -968,22 +982,22 @@ Values with differences below this value will be treated as same. Dit is die waarde wat gebruik word deur funksies wat gebruik maak van 'n toleranswaarde. Waardes met verskille onder hierdie waarde sal behandel word as dieselfde. - + DXF format options DXF formaatopsies - + Check this if you want the non-named blocks (beginning with a *) to be imported too Merk dit indien jy die blokke sonder naam (wat begin met a*) ook wil invoer - + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... Indien gemerk, sal Freecad probeer om samevallende voorwerpe te verenig in 'n draadwerk. Dit kan 'n rukkie neem ... - + Join geometry Verenig voorwerpe @@ -1083,32 +1097,32 @@ Values with differences below this value will be treated as same. Merk/kies die oorspronklike voorwerpe na kopiëring - + If checked, a grid will appear when drawing Indien gekies, sal 'n ruitnet verskyn wanneer geteken word - + Use grid Gebruik ruitnet - + Grid spacing Ruitnet spasiëring - + The spacing between each grid line Die spasiëring tussen elke ruitlyn - + Main lines every Hooflyne elke - + Mainlines will be drawn thicker. Specify here how many squares between mainlines. Hooflyne sal dikker wees. Spesifiseer hier hoeveel ruite tussen hooflyne. @@ -1138,22 +1152,22 @@ Values with differences below this value will be treated as same. Regs - + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable indien dit gemerk is, sal voorwerpe van dieselfde lae saamgevoeg word tot tekenblokke, wat die vertoonspoed verbeter, maar hulle minder wysigbaar maak - + Group layers into blocks Groepeer lae in blokke - + If this is checked, all objects containing faces will be exported as 3d polyfaces Indien dit gemerk is, sal alle voorwerpe wat vlakke het uitgevoer word as 3D veelvlakke - + Export 3D objects as polyface meshes Voer 3D-voorwerpe uit as veelvlakmase @@ -1193,37 +1207,37 @@ Values with differences below this value will be treated as same. Show Working Plane tracker - + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document - + Use standard font size for texts Use standard font size for texts - + If this is checked, hatches will be converted into simple wires If this is checked, hatches will be converted into simple wires - + Import hatch boundaries as wires Import hatch boundaries as wires - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width - + Render polylines with width Render polylines with width @@ -1278,67 +1292,67 @@ Values with differences below this value will be treated as same. Always snap (disable snap mod) - + Construction geometry Konstruksiegeometrie - + Construction geometry color Construction geometry color - + Import Import - + texts and dimensions texts and dimensions - + points points - + layouts layouts - + *blocks *blocks - + If this is checked, the exported objects will be projected to reflect the current view direction If this is checked, the exported objects will be projected to reflect the current view direction - + Project exported objects along current view direction Project exported objects along current view direction - + Ellipse export is badly supported. Use this to export them as polylines instead. Ellipse export is badly supported. Use this to export them as polylines instead. - + DWG format options DWG format options - + Path to Teigha File Converter Path to Teigha File Converter - + The path to your Teigha File Converter executable The path to your Teigha File Converter executable @@ -1393,7 +1407,7 @@ Values with differences below this value will be treated as same. Grid - + Always show the grid Always show the grid @@ -1423,52 +1437,37 @@ Values with differences below this value will be treated as same. size - + Dimensions arrows Dimensions arrows - + style style - + Dot Dot - + Circle Sirkel - + Arrow Arrow - + The default size of arrows The default size of arrows - - Dimensions lines - Dimensions lines - - - - text above - text above - - - - text inside - text inside - - - + The default size of dimensions extension lines The default size of dimensions extension lines @@ -1508,80 +1507,55 @@ Values with differences below this value will be treated as same. Fill objects with faces whenever possible - - DXF / DWG options - DXF / DWG options - - - + Create Skep - - If thi sis checked, only standard Part objects will be created (fastest) - If thi sis checked, only standard Part objects will be created (fastest) - - - + simple Part shapes simple Part shapes - + If this is checked, parametric Draft objects will be created whenever possible If this is checked, parametric Draft objects will be created whenever possible - + Draft objects Draft objects - + If this is checked, sketches will be created whenever possible If this is checked, sketches will be created whenever possible - + Sketches Sketches - + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. - + Get original colors from the DXF file Get original colors from the DXF file - - If this is checked, DXF layers will be imported as Draft layers - If this is checked, DXF layers will be imported as Draft layers - - - - Use Draft Layers - Use Draft Layers - - - + Treat ellipses and splines as polylines Treat ellipses and splines as polylines - + Max Spline Segment: Max Spline Segment: - - - SVG / OCA options - SVG / OCA options - Export style @@ -1597,21 +1571,146 @@ Values with differences below this value will be treated as same. Show the unit suffix in dimensions Show the unit suffix in dimensions + + + DXF / DWG + DXF / DWG + + + + Automatic update + Automatic update + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + + + + Allow FreeCAD to automatically download and update the DXF libraries + Allow FreeCAD to automatically download and update the DXF libraries + + + + If this is checked, only standard Part objects will be created (fastest) + If this is checked, only standard Part objects will be created (fastest) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + If this is checked, DXF layers will be imported as Draft VisGroups + + + + Use VisGroups + Use VisGroups + + + + mm + mm + + + + SVG / OCA + SVG / OCA + + + + Grid size + Grid size + + + + the number of horizontal or vertical lines of the grid + the number of horizontal or vertical lines of the grid + + + + lines + lines + + + + Dimensions + Dimensions + + + + display mode + display mode + + + + text above (2D) + text above (2D) + + + + text inside (3D) + text inside (3D) + + + + extension lines size + extension lines size + + + + Drawing views + Drawing views + + + + Dashed line definition + Dashed line definition + + + + A SVG linestyle definition + A SVG linestyle definition + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + Dashdot line definition + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Dotted line definition + + + + 0.02,0.02 + 0.02,0.02 + Workbench - + Draft Snap Draft Snap - + Draft creation tools Draft creation tools - + Draft modification tools Draft modification tools @@ -1619,637 +1718,599 @@ Values with differences below this value will be treated as same. draft - + Draft Command Bar Draft Command Bar - + active command: aktiewe opdrag: - + None Geen - + Active Draft command Aktiewe Tekening bevel - + X coordinate of next point X-koördinaat van die volgende punt - + X X - + Y Y - + Z Z - + Y coordinate of next point Y-koördinaat van die volgende punt - + Z coordinate of next point Z-koördinaat van die volgende punt - + Radius Radius - + Radius of Circle Radius van die sirkel - + &Relative &Relatief - + Coordinates relative to last point or absolute (SPACE) Koördinate relatief tot laaste punt of absoluut (SPASIE) - + F&illed &Gevul - + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) Kies dit as die voorwerp moet voorkom as gevul, anders sal dit lyk soos 'n draadwerk (i) - + &Finish &Beëindig - + Finishes the current drawing or editing operation (F) Beëindig die huidige teken- of wysigingsoperasie (F) - + If checked, command will not finish until you press the command button again As dit gemerk is, sal die opdrag nie voltooi word totdat jy die bevel weer gee nie - - &Continue - &GaanVoort - - - + If checked, an OCC-style offset will be performed instead of the classic offset Indien gekies, sal 'n OCC-styl verskuiwing gedoen word in plaas van die klassieke verskuiwing - + &OCC-style offset &OCC-styl verskuiwing - + Add points to the current object Voeg punte by die huidige voorwerp - + Remove points from the current object Verwyder punte van die huidige voorwerp - + Make Bezier node sharp Make Bezier node sharp - + Make Bezier node tangent Make Bezier node tangent - + Make Bezier node symmetric Make Bezier node symmetric - + &Undo &Herstel - + Undo the last segment (CTRL+Z) Herstel die laaste segment (CTRL+Z) - + &Close &MaakToe - + Finishes and closes the current line (C) Voltooi en beëindig die huidige lyn (C) - + &Wipe &Vee - + Wipes the existing segments of this line and starts again from the last point (W) Vee die bestaande segmente van hierdie lyn uit en begin weer van die laaste punt (W) - + Number of sides Aantal sye - + Offset Verplasing - + XY XY - + Select XY plane Kies XY vlak - + XZ XZ - + Select XZ plane Kies XZ vlak - + YZ YZ - + Select YZ plane Kies YZ-vlak - + View Voorkoms - + Select plane perpendicular to the current view Kies vlak loodreg op die huidige aansig - + Do not project points to a drawing plane Moenie punte projekteer na 'n tekeningvlak nie - + &Copy &Kopieer - + If checked, objects will be copied instead of moved (C) Indien gemerk, sal voorwerpe gekopieer in plaas van geskuif word (C) - + Text string to draw Text string to draw - + String String - + Height of text Height of text - + Height Hoogte - + Intercharacter spacing Intercharacter spacing - + Tracking Tracking - + Full path to font file: Full path to font file: - + Open a FileChooser for font file Open a FileChooser for font file - + Set/unset a working plane Set/unset a working plane - + Line Color Lynkleur - + Face Color Vlakkleur - + Line Width Lynwydte - + Font Size Skrifgrootte - + Apply to selected objects Pas toe op gekose voorwerpe - + Toggles Construction Mode Skakel Konstruksiemodus aan/af - + Select Plane Kies vlak - + Line Lyn - + DWire DWire - + Circle Sirkel - + Center X Sentreer X - + Arc Boog - + Point Punt - + Distance Afstand - + Trim Vernou - + Pick Object Kies voorwerp - + Edit Wysig - + Global X Global X - + Global Y Global Y - + Global Z Global Z - + Local X Local X - + Local Y Local Y - + Local Z Local Z - + Invalid Size value. Using 200.0. Invalid Size value. Using 200.0. - + Invalid Tracking value. Using 0. Invalid Tracking value. Using 0. - + Please enter a text string. Please enter a text string. - + Select a Font file Select a Font file - + Please enter a font file. Please enter a font file. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + Found groups: closing each open object inside Het groepe gevind: sluit elke oop voorwerp - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidificable object: solidifying it Het 1 solidifieerbare voorwerp gevind: besig om te solidifieer - + Found 2 objects: fusing them Het twee voorwerpe gevind: verenig hulle - - Found several objects: making a shell - - Found several objects: making a shell - - - - - Found several coplanar objects or faces: making one face - - Found several coplanar objects or faces: making one face - - - - + Found 1 non-parametric objects: draftifying it Het een nie-parametriese voorwerp gevind: omskep dit in 'n skets - - Found 1 closed sketch object: making a face from it - - Het een geslote sketsvoorwerp gevind: maak 'n vlak van dit - - - - Found closed wires: making faces - - Found closed wires: making faces - - - - + Found 1 open wire: closing it Het een oop draad gevind: maak dit toe - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Het verskeie kante gevind: bedraad hulle - - Found several non-treatable objects: making compound - - Het verskeie onverwerkbare voorwerpe gevind: maak 'n saamgestelde voorwerp - - - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 parametric object: breaking its dependencies Het een parametriese voorwerp gevind: breek sy afhanklikhede - + Found 2 objects: subtracting them Het twee voorwerpe gevind: verwyder hulle - + Found several faces: splitting them Het verskeie vlakke gevind: hulle word verdeel - + Found several objects: subtracting them from the first one Het verskeie voorwerpe gevind: hulle word verwyder van die eerste een - + Found 1 face: extracting its wires Het een vlak gevind: die drade word geëkstraeer - + Found only wires: extracting their edges Het slegs drade gevind: hulle kante word geëkstraeer - + No more downgrade possible No more downgrade possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + Pick a face to define the drawing plane Kies 'n aansig om die tekeningvlak te definieer - + Pick first point: Kies die eerste punt - + Create Line Create Line - + Create DWire Create DWire - + DWire has been closed DWire has been closed - + Last point has been removed Laaste punt is verwyder - + Pick next point: Kies die volgende punt: - + Pick next point, or (F)inish or (C)lose: Kies die volgende punt, of sluit af (F) of maak toe (C): - + BSpline BSpline @@ -2260,7 +2321,7 @@ Values with differences below this value will be treated as same. Kurwe is gesluit - + Create BSpline Skep Kurwe @@ -2270,363 +2331,357 @@ Values with differences below this value will be treated as same. BezCurve - + Bezier curve has been closed Bezier curve has been closed - + Create BezCurve Create BezCurve - + Rectangle Reghoek - + Create Plane Create Plane - + Create Rectangle Skep Reghoek - + Pick opposite point: Kies teenoorgestelde punt: - + Pick center point: Kies sentrumpunt: - + Pick radius: Kies radius - + Pick start angle: Kies beginhoek: - + Pick aperture: Kies opening - + Create Circle Skep Sirkel - + Create Arc Skep Boog - + Start Angle Beginhoek - + Aperture Gaping - + Aperture angle: Openinghoek - + Polygon Veelhoek - + Create Polygon Skep Veelvlak - + Ellipse Ellipse - + Create Ellipse Create Ellipse - + Text Teks - + Pick location point: Kies liggingpunt: - + Create Text Skep Teks - + Dimension Dimensioneer - + Create Dimension Skep Dimensie - + Edges don't intersect! Die kante sny nie mekaar nie! - + ShapeString ShapeString - + Pick ShapeString location point: Pick ShapeString location point: - + Create ShapeString Create ShapeString - + Move Verskuif - + Select an object to move Kies 'n voorwerp om te skuif - + Pick start point: Kies beginpunt: - + Copy Kopieer - + Pick end point: Kies eindpunt: - + Change Style Verander Styl - + Select an object to rotate Roteer die gekose objekte. CTRL om vas te heg, SHIFT om vas te hou, ALT om te kopieer - + Pick rotation center: Kies spilpunt: - + Rotate Roteer - + Pick base angle: Kies basishoek: - + Pick rotation angle: Kies rotasiehoek: - + Select an object to offset Kies 'n voorwerp om te verplaas - + Offset only works on one object at a time Verplasing werk net op een voorwerp op 'n slag - + Cannot offset this object type Kan nie hierdie voorwerptipe verskuif nie - + Pick distance: Kies afstand: - + Select an object to upgrade Kies 'n voorwerp om op te gradeer - + Upgrade Opgradeer - + Downgrade Gradeer neer - - Select an object to trim/extend - - Kies 'n voorwerp om te verklein/vergroot - - - + Scale Skaal - + Select an object to scale Kies 'n voorwerp om te skaal - + Pick base point: Kies basispunt: - + Pick scale factor: Kies skaalfaktor: - + Select an object to project Select an object to project - + Select a Draft object to edit Select a Draft object to edit - + This object type is not editable Hierdie voorwerptipe kan nie gewysig word nie - + Active object must have more than two points/nodes Aktiewe voorwerp moet meer as twee punte/nodes hê - + Selection is not a Knot Selection is not a Knot - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert Select an object to convert - + Select an object to array Select an object to array - + Please select base and path objects Please select base and path objects - + Create Point Create Point - + Select an object to clone Select an object to clone - + Select face(s) on existing object(s) Select face(s) on existing object(s) @@ -2640,41 +2695,212 @@ Values with differences below this value will be treated as same. - - Installed Macros - Geïnstalleerde Makro's - - - + &Draft &Draft - + Utilities Utilities - + Wire tools Draadwerktuie - + Snapping Snapping - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Sides Sides + + + BSplines and Bezier curves are not supported by this tool + BSplines and Bezier curves are not supported by this tool + + + + The given object is not planar and cannot be converted into a sketch. + The given object is not planar and cannot be converted into a sketch. + + + + Found several objects: creating a shell + + Found several objects: creating a shell + + + + + Found several coplanar objects or faces: creating one face + + Found several coplanar objects or faces: creating one face + + + + + Found 1 linear object: converting to line + + Found 1 linear object: converting to line + + + + + Found 1 closed sketch object: creating a face from it + + Found 1 closed sketch object: creating a face from it + + + + + Found closed wires: creating faces + + Found closed wires: creating faces + + + + + Found several non-treatable objects: creating compound + + Found several non-treatable objects: creating compound + + + + + Length + Lengte + + + + Angle + Hoek + + + + Length of current segment + Length of current segment + + + + Angle of current segment + Angle of current segment + + + + Check this to lock the current angle (l) + Check this to lock the current angle (l) + + + + Con&tinue + Con&tinue + + + + &Select edge + &Select edge + + + + Selects an existing edge to be measured by this dimension (E) + Selects an existing edge to be measured by this dimension (E) + + + + Auto + Auto + + + + Sorry, offset of Bezier curves is currently still not supported + + Sorry, offset of Bezier curves is currently still not supported + + + + + Convert to Sketch + Convert to Sketch + + + + Convert to Draft + Convert to Draft + + + + Convert + Convert + + + + Array + Reeks + + + + Select object(s) to trim/extend + + Select object(s) to trim/extend + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + Unable to trim these objects, only Draft wires and arcs are supported + + + + + Unable to trim these objects, too many wires + + Unable to trim these objects, too many wires + + + + + These objects don't intersect + + These objects don't intersect + + + + + Too many intersection points + + Too many intersection points + + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.qm b/src/Mod/Draft/Resources/translations/Draft_cs.qm index 0d0416e4fc..12ca36e195 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_cs.qm and b/src/Mod/Draft/Resources/translations/Draft_cs.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.ts b/src/Mod/Draft/Resources/translations/Draft_cs.ts index ab9f175375..3501511f75 100644 --- a/src/Mod/Draft/Resources/translations/Draft_cs.ts +++ b/src/Mod/Draft/Resources/translations/Draft_cs.ts @@ -1,15 +1,29 @@ + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + Stažení dxf knihoven selhalo. +Prosím stáhněte je manuálně z: +https://github.com/yorikvanhavre/Draft-dxf-importer +a umístěte do Vaší složky maker. + + Draft_AddPoint - + Add Point Přidat bod - + Adds a point to an existing wire/bspline Přidá bod do stávající čáry/bspline @@ -17,12 +31,12 @@ Draft_AddToGroup - + Add to group... Přidat do skupiny... - + Adds the selected object(s) to an existing group Přidá vybraný/é objekt(y) do existující skupiny @@ -30,12 +44,12 @@ Draft_ApplyStyle - + Apply Current Style Použít aktuální styl - + Applies current line width and color to selected objects Použít aktuální tloušťku čáry a barvu na vybrané objekty @@ -43,12 +57,12 @@ Draft_Arc - + Arc oblouk - + Creates an arc. CTRL to snap, SHIFT to constrain Vytvoří oblouk. CTRL pro uchopení, SHIFT pro vynucení @@ -56,12 +70,12 @@ Draft_Array - + Array Pole - + Creates a polar or rectangular array from a selected object Vytvoří polární nebo obdelníkové pole z vybraných objektů @@ -69,12 +83,12 @@ Draft_BSpline - + B-Spline B-Spline - + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain Vytváří vlnovku z více bodů. CTRL pro uchopení, SHIFT pro omezení @@ -84,7 +98,7 @@ BezCurve - BezCurve + Beziérova křivka @@ -95,12 +109,12 @@ Draft_Circle - + Circle Kruh - + Creates a circle. CTRL to snap, ALT to select tangent objects Vytvoří kruh. CTRL pro přichycení, ALT vybere objekty na tangentě @@ -108,25 +122,25 @@ Draft_Clone - + Clone Klon - + Clones the selected object(s) - Naklonuje vybraný/é objekt(y) + Naklonuje vybrané objekty Draft_CloseLine - + Close Line zavře čáru - + Closes the line being drawn Zavřená čára nakreslena @@ -134,12 +148,12 @@ Draft_DelPoint - + Remove Point Odstranit bod - + Removes a point from an existing wire or bspline Odstraní bod z existující křivky nebo bsplinu @@ -147,12 +161,12 @@ Draft_Dimension - + Dimension Rozměr - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Vytvoří rozměr. CTRL pro přichycení, SHIFT pro omezení, ALT vybere segment @@ -160,12 +174,12 @@ Draft_Downgrade - + Downgrade Ponížení - + Explodes the selected objects into simpler objects, or subtract faces Rozebere vybrané objekty do jednodušších objektů, nebo odečítá plochy @@ -173,7 +187,7 @@ Draft_Draft2Sketch - + Draft to Sketch Skica z Návrhu @@ -181,12 +195,12 @@ Draft_Drawing - + Drawing Výkres - + Puts the selected objects on a Drawing sheet. Umístí vybrané objekty na výkres. @@ -194,12 +208,12 @@ Draft_Edit - + Edit Upravit - + Edits the active object Upravuje aktivní objekt @@ -207,12 +221,12 @@ Draft_Ellipse - + Ellipse Elipsa - + Creates an ellipse. CTRL to snap Vytvoří elipsu. Stiskni CTRL pro přichycení. @@ -220,12 +234,12 @@ Draft_Facebinder - + Facebinder Sloučit plochy - + Creates a facebinder object from selected face(s) Vytvoří sloučený objekt z vybraných ploch @@ -233,12 +247,12 @@ Draft_FinishLine - + Finish line Cílová čára - + Finishes a line without closing it ukončí čáru bez uzavření @@ -246,12 +260,12 @@ Draft_FlipDimension - + Flip Dimension Obrať rozměr - + Flip the normal direction of a dimension Obrátí směr normály rozměru @@ -259,38 +273,25 @@ Draft_Heal - + Heal Léčit - - Heal faultly Draft objects saved from an earlier FreeCAD version - Léčí chybné načrtnuté objekty uložené v dřívějších verzích programu FreeCAD - - - - Draft_Layer - - - Layer - Layer - - - - Adds a layer - Adds a layer + + Heal faulty Draft objects saved from an earlier FreeCAD version + Léčí objekty Návrhu uložené v dřívějších verzích FreeCADu Draft_Line - + Line Čára - + Creates a 2-point line. CTRL to snap, SHIFT to constrain vytvoří čáru 2 body. CTRL pro uchopení, SHIFT pro vynucení @@ -298,12 +299,12 @@ Draft_Move - + Move Přesun - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy Přesune vybrané objekty mezi 2 body. CTRL pro přichycení, SHIFT pro omezení, ALT pro kopírování @@ -311,12 +312,12 @@ Draft_Offset - + Offset Odstup - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Posune aktivní objekt. CTRL pro přichycení, SHIFT pro omezení, ALT pro kopírování @@ -324,12 +325,12 @@ Draft_PathArray - + PathArray Dráha pole - + Creates copies of a selected object along a selected path. Vytvoří kopije z vybraných objektů podél vybrané dráhy. @@ -337,12 +338,12 @@ Draft_Point - + Point Bod - + Creates a point object Vytvoří bodový objekt @@ -350,12 +351,12 @@ Draft_Polygon - + Polygon Mnohoúhelník - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Vytváří pravidelný mnohoúhelník. CTRL pro přichycení, SHIFT pro omezení @@ -363,12 +364,12 @@ Draft_Rectangle - + Rectangle Obdélník - + Creates a 2-point rectangle. CTRL to snap Vytvoří obdélník 2-body. CTRL pro uchopení @@ -376,12 +377,12 @@ Draft_Rotate - + Rotate Rotace - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Otočí vybrané objekty. CTRL pro přichycení, SHIFT pro omezení, ALT vytvoří kopii @@ -389,12 +390,12 @@ Draft_Scale - + Scale Změna velikosti - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Změní velikost vybraných objektů ze základního bodu. CTRL pro přichycení, SHIFT pro omezení, ALT pro kopírování @@ -402,12 +403,12 @@ Draft_SelectGroup - + Select group Vybrat skupinu - + Selects all objects with the same parents as this group Vybere všechyn objekty se společnými předky jako skupinu @@ -415,12 +416,12 @@ Draft_SelectPlane - + SelectPlane Výběr roviny - + Select a working plane for geometry creation Vyberte pracovní rovinu pro tvorbu geometrie @@ -428,17 +429,17 @@ Draft_Shape2DView - + Shape 2D view 2D průmět - + Creates Shape 2D views of selected objects Vytvoří 2D průmět vybraných objektů - + Convert bidirectionally between Draft and Sketch objects Převést vzájemně mezi objekty Návrhu a Skici @@ -446,12 +447,12 @@ Draft_ShapeString - + Shape from text... Obrazec z textu... - + Creates text string in shapes. Vytvoří text v obrazci. @@ -459,12 +460,12 @@ Draft_ShowSnapBar - + Show Snap Bar Zobrazit přichytávací panel - + Shows Draft snap toolbar Zobrazit Přichytávací nástrojový panel @@ -472,12 +473,12 @@ Draft_Snap_Angle - + Angles Úhly - + Snaps to 45 and 90 degrees points on arcs and circles Zachytávání na bodech po 45 a 90 stupňích na kruzích a elipsách @@ -485,12 +486,12 @@ Draft_Snap_Center - + Center Střed - + Snaps to center of circles and arcs Přichytit na střed kruhů nebo oblouků @@ -498,12 +499,12 @@ Draft_Snap_Dimensions - + Dimensions Rozměry - + Shows temporary dimensions when snapping to Arch objects Zobrazuje dočasný rozměr když se přichytává k objektům @@ -511,12 +512,12 @@ Draft_Snap_Endpoint - + Endpoint Koncový bod - + Snaps to endpoints of edges Přichytí do koncového bodu hrany @@ -524,12 +525,12 @@ Draft_Snap_Extension - + Extension Prodloužit - + Snaps to extension of edges Přichytí do prodloužení hrany @@ -537,12 +538,12 @@ Draft_Snap_Grid - + Grid - Grid + Mřížka - + Snaps to grid points Přichytí na body mřížky @@ -550,12 +551,12 @@ Draft_Snap_Intersection - + Intersection Průnik - + Snaps to edges intersections Přichytí na průsečík hran @@ -563,12 +564,12 @@ Draft_Snap_Lock - + Toggle On/Off Přepínač On/Off - + Activates/deactivates all snap tools at once Aktivace/deaktivace všech nástrojů najednou @@ -576,12 +577,12 @@ Draft_Snap_Midpoint - + Midpoint Bod uprostřed - + Snaps to midpoints of edges Přichytí na bod uprostřed hrany @@ -589,12 +590,12 @@ Draft_Snap_Near - + Nearest Nejbližší - + Snaps to nearest point on edges Přichytí k nejbližšímu bodu hrany @@ -602,12 +603,12 @@ Draft_Snap_Ortho - + Ortho Pravoůhle - + Snaps to orthogonal and 45 degrees directions Přichytí pravoůhle a ve směrech pod 45 stupni @@ -615,12 +616,12 @@ Draft_Snap_Parallel - + Parallel Rovnoběžně - + Snaps to parallel directions of edges Přichtí rovnoběžně ke směru hrany @@ -628,12 +629,12 @@ Draft_Snap_Perpendicular - + Perpendicular Kolmo - + Snaps to perpendicular points on edges Přichytí kolmo v bodě na hraně @@ -641,12 +642,12 @@ Draft_Snap_WorkingPlane - + Working Plane Pracovní rovina - + Restricts the snapped point to the current working plane Omezení přichtávání bodů na aktuální pracovní rovinu @@ -654,12 +655,12 @@ Draft_Text - + Text Text - + Creates an annotation. CTRL to snap Vytvoří anotace. CTRL na přichycení @@ -667,12 +668,12 @@ Draft_ToggleConstructionMode - + Toggle construcion Mode Přepíná konstrukční režim - + Toggles the Construction Mode for next objects. Přepíná režim konstrukce pro další objekty. @@ -680,12 +681,12 @@ Draft_ToggleContinueMode - + Toggle Continue Mode Přepnout opakování režimu - + Toggles the Continue Mode for next commands. Zapne/vypne režim pokračování pro příští příkaz. @@ -693,12 +694,12 @@ Draft_ToggleDisplayMode - + Toggle display mode Přepnout režim zobrazení - + Swaps display mode of selected objects between wireframe and flatlines Přepne režim zobrazení vybraných objektů mezi drátěným a stínovaným @@ -706,25 +707,25 @@ Draft_ToggleGrid - + Toggle Grid Přepnout mřížku - - Toggles the Draft gid on/off - Vypnout/zapnout mřížku v Návrhu + + Toggles the Draft grid on/off + Přepne mřížku Návrhu - zapnuto/vypnuto Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Ořízne nebo prodlouží vybraný objekt, nebo vysune samostatnou plochu. CTRL úchop, SHIFT omezení vzhledem k aktuálnímu segmentu nebo k normále, ALT obrácení @@ -732,12 +733,12 @@ Draft_UndoLine - + Undo last segment Vrátit zpět poslední segment - + Undoes the last drawn segment of the line being drawn Vrátí zpět poslední nakreslený segment kreslené čáry @@ -745,25 +746,38 @@ Draft_Upgrade - + Upgrade Povýšení - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces Spojuje vybrané objekty do jednoho, nebo převede uzavřené obrysy na plné plochy, nebo sjednotí plochy + + Draft_VisGroup + + + VisGroup + VisGroup + + + + Adds a VisGroup + Přidá VisGroup + + Draft_Wire - + DWire DWire - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain Vytvoří multibodovou Návrhovou křivku (Dwire). CTRL pro přichycení, SHIFT pro omezení @@ -771,12 +785,12 @@ Draft_WireToBSpline - + Wire to BSpline BSpline z čáry - + Converts between Wire and BSpline Převede mezi čárou a BSpline @@ -804,17 +818,17 @@ Výchozí barva pro přichycené symboly - + This is the default color for objects being drawn while in construction mode. Toto je výchozí barva pro objekty nakreslena v konstrukčním režimu. - + This is the default group name for construction geometry Toto je výchozí název skupiny pro konstrukční geometrii - + Construction Konstrukce @@ -917,17 +931,17 @@ such as "Arial:Bold" Původní barva a šířka čáry - + if this is checked, paper space objects will be imported too pokud je zatrženo, budou importovány i objekty na ploše papíru - + if this is unchecked, texts/mtexts won't be imported pokud je zaškrtnuta, text/mtext nebude importován - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. Při exportu splinů do DXF, jsou transformovány do křivek. Tato hodnota je maximální délka každého segmentu křivky. Je-li 0, pak je celá spline považována za rovnou část. @@ -952,7 +966,7 @@ such as "Arial:Bold" Obecná nastavení - + Construction group name Název konstrukční skupiny @@ -968,22 +982,22 @@ Values with differences below this value will be treated as same. Toto je hodnota použitá funkcemi, které používají toleranci. Hodnoty s rozdíly pod tuto hodnotu budou považovány za stejné. - + DXF format options Možnosti formátu DXF - + Check this if you want the non-named blocks (beginning with a *) to be imported too Toto zaškrtněte, pokud chcete nepojmenovaný blok (počáteční *) bude importováno také - + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... Je-li toto políčko zaškrtnuto, freecad se pokusí spojit shodné objekty do drátů. Pozor, může to chvíli trvat... - + Join geometry Spojit geometrie @@ -1083,32 +1097,32 @@ Values with differences below this value will be treated as same. Vybrat základní objekty po kopírování - + If checked, a grid will appear when drawing Je-li zaškrtnuto, během kreslení se zobrazí mřížka - + Use grid Použít mřížku - + Grid spacing Rozteč mřížky - + The spacing between each grid line Velikost rastru přichytávací mřížky - + Main lines every Hlavní čáry každých - + Mainlines will be drawn thicker. Specify here how many squares between mainlines. Hlavní čáry budou kresleny silněji. Zadejte kolik slabých má být mezi hlavními. @@ -1138,22 +1152,22 @@ Values with differences below this value will be treated as same. Vpravo - + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable Je-li zaškrtnuto, objekty ze společných vrstev budou spojeny do bloku, takže se zobrazí rychleji, ale budou obtížněji upravitelné - + Group layers into blocks Skupiny vrstev do bloků - + If this is checked, all objects containing faces will be exported as 3d polyfaces Pokud je toto zvoleno, všechny objekty obsahující plochy budou exportovány jako 3D plochy - + Export 3D objects as polyface meshes Exportuje 3D objekty jako plošné sítě @@ -1193,37 +1207,37 @@ Values with differences below this value will be treated as same. Zobrazit stopaře pracovní roviny - + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command Je-li vybráno, mřížka bude vždy viditelná při aktivním režimu náčrtu. Jinak pouze když použijete příkaz - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document Je-li zaškrtnuto, importovaný text bude mít standardní velikost textu Návrhu, namísto velikosti kterou měl v DXF dokumentu - + Use standard font size for texts Použít standardní velikost písma pro text - + If this is checked, hatches will be converted into simple wires Je-li zaškrtnuto, šrafy budou převedeny na jednoduché dráty - + Import hatch boundaries as wires Importovat hranice šrafů jako dráty - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width Je-li zaškrtnuto, lomené křivky budou vykresleny jako uzavřené dráty se správnou tloušťkou, pokud je definovaná - + Render polylines with width Vykreslit lomené čáry s tloušťkou @@ -1255,102 +1269,102 @@ Values with differences below this value will be treated as same. When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. - When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. + Je-li zaškrtnuto, Draft nástroje budou kreslit primitivy Part namísto objektů Draft, pokud to jde. Use Part Primitives when available - Use Part Primitives when available + Vytvářet Part primitivy, pokud to jde Snapping - Snapping + Přichycení If this is checked, snapping is activated without the need to press the snap mod key - If this is checked, snapping is activated without the need to press the snap mod key + Je-li zaškrtnuto, přichytávání je aktivováno bez potřeby stisknout klávesu přichytávacího módu Always snap (disable snap mod) - Always snap (disable snap mod) + Přichytávat vždy (zablokuje mód přichytávání) - + Construction geometry Geometrická konstrukce - + Construction geometry color - Construction geometry color + Barva konstrukční geometrie - + Import Import - - - texts and dimensions - texts and dimensions - - - - points - points - + texts and dimensions + texty a rozměry + + + + points + body + + + layouts - layouts + rozložení - + *blocks - *blocks + *bloky - + If this is checked, the exported objects will be projected to reflect the current view direction - If this is checked, the exported objects will be projected to reflect the current view direction + Je-li zaškrtnuto, exportované objekty budou promítnuty ve směru aktuálního pohledu - + Project exported objects along current view direction - Project exported objects along current view direction + Promítnout exportované objekty ve směru aktuálního pohledu - + Ellipse export is badly supported. Use this to export them as polylines instead. - Ellipse export is badly supported. Use this to export them as polylines instead. + Export elipsy je nedostatečně podporován. Tímto se bude exportovat jako lomená čára. - + DWG format options - DWG format options + Možnosti formátu DWG - + Path to Teigha File Converter - Path to Teigha File Converter + Cesta ke konvertoru Teigha File Converter - + The path to your Teigha File Converter executable - The path to your Teigha File Converter executable + Cesta k vašemu spustitelnému souboru Teigha File Converter Visual settings - Visual settings + Vizuální nastavení Visual Settings - Visual Settings + Vizuální nastavení @@ -1360,909 +1374,954 @@ Values with differences below this value will be treated as same. Default line width - Default line width + Výchozí tloušťka čáry Snap symbols style - Snap symbols style + Styl přichytávacího symbolu Draft classic style - Draft classic style + Klasický styl Draft Bitsnpieces style - Bitsnpieces style + Styl Bitsnpieces Color - Color + Byrva Hatch patterns resolution - Hatch patterns resolution + Rozližení šrafovacího vzoru Grid - Grid + Mřížka - + Always show the grid - Always show the grid + Stále zobrazovat mřížku Texts and dimensions - Texts and dimensions + Texty a kóty Texts - Texts + Texty font - font + písmo Internal font - Internal font + Vnitřní písmo size - size + velikost - + Dimensions arrows - Dimensions arrows + Šipky kót - + style - style + styl - + Dot - Dot + Tečka - + Circle Kruh - - - Arrow - Arrow - - - - The default size of arrows - The default size of arrows - - - - Dimensions lines - Dimensions lines - - - - text above - text above - - text inside - text inside + Arrow + Šipka + The default size of arrows + Výchozí velikost šipek + + + The default size of dimensions extension lines - The default size of dimensions extension lines + Výchozí velikost vynášecích čar kót Dimensions text - Dimensions text + Text kót orientation - orientation + orientace spacing - spacing + mezery The space between the dimension line and the dimension text - The space between the dimension line and the dimension text + Mezera mezi kótovací čárou a textem Default ShapeString Font File - Default ShapeString Font File + Výchozí soubor písma pro Tvar písma Select a font file - Select a font file + Vyberte soubor písma Fill objects with faces whenever possible - Fill objects with faces whenever possible + Vyplnit objekty plochou, kdykoliv je to možné - - DXF / DWG options - DXF / DWG options - - - + Create Vytvořit - - If thi sis checked, only standard Part objects will be created (fastest) - If thi sis checked, only standard Part objects will be created (fastest) - - - + simple Part shapes - simple Part shapes + jednoduché tvary součásti - + If this is checked, parametric Draft objects will be created whenever possible - If this is checked, parametric Draft objects will be created whenever possible + Je-li zaškrtnuto, budou vytvořeny Draft objekty, kdykoliv je to možné - + Draft objects - Draft objects + Draft objekty - + If this is checked, sketches will be created whenever possible - If this is checked, sketches will be created whenever possible + Je-li zaškrtnuto, budou vytvořeny náčrty, kdykoliv je to možné - + Sketches - Sketches + Náčrty - + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. - If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. + Je-li zaškrtnuto, budou barvy získány z DXF objektů, kdykolv je to možné. Jinak budou použity výchozí barvy. - + Get original colors from the DXF file - Get original colors from the DXF file + Převzít originální barvy z DXF souboru - - If this is checked, DXF layers will be imported as Draft layers - If this is checked, DXF layers will be imported as Draft layers - - - - Use Draft Layers - Use Draft Layers - - - + Treat ellipses and splines as polylines - Treat ellipses and splines as polylines + Brát elipsy a splajny jako lomené čáry - + Max Spline Segment: - Max Spline Segment: - - - - SVG / OCA options - SVG / OCA options + Max. segment splajnu: Export style - Export style + Styl exportu Snapping settings - Snapping settings + Nastavení přichytávání Show the unit suffix in dimensions - Show the unit suffix in dimensions + Zobrazovat jednoteky v kótách + + + + DXF / DWG + DXF / DWG + + + + Automatic update + Automatická aktualizace + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + <html><head/> <body><p>Zaškrtnutím tohoto povolíte FreeCADu stáhnout a aktualizovat</p> <p>komponenty potřebné pro DXF import a export. Můžete to také udělat</p> <p>manuálně tím, že navštívíte https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + + + + Allow FreeCAD to automatically download and update the DXF libraries + Povolit FreeCADu automaticky stáhnout a aktualizovat DXF knihovny + + + + If this is checked, only standard Part objects will be created (fastest) + Je-li zaškrtnuto, budou vytvořeny jen standardní objekty Součásti (nejrychlejší) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + Je-li zaškrtnuto, DXF vrstvy budou importovány jako Návrhové VisGroups + + + + Use VisGroups + Používat VisGroups + + + + mm + mm + + + + SVG / OCA + SVG / OCA + + + + Grid size + Velikost mřížky + + + + the number of horizontal or vertical lines of the grid + počet vodorovných nebo svislých čar mřížky + + + + lines + čar + + + + Dimensions + Rozměry + + + + display mode + režim zobrazení + + + + text above (2D) + text nad (2D) + + + + text inside (3D) + text uvnitř (3D) + + + + extension lines size + velikost vynášecích čar + + + + Drawing views + Pohledy výkresu + + + + Dashed line definition + Definice přerušované čáry + + + + A SVG linestyle definition + Definice SVG stylu čar + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + Definice čerchované čáry + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Definice tečkované čáry + + + + 0.02,0.02 + 0.02,0.02 Workbench - + Draft Snap - Draft Snap + Draft úchopy + + + + Draft creation tools + Draft kreslící nástroje - Draft creation tools - Draft creation tools - - - Draft modification tools - Draft modification tools + Draft modifikační nástroje draft - + Draft Command Bar - Draft Command Bar + Draft příkazový panel - + active command: aktivní příkaz: - + None Žádný - + Active Draft command aktivní příkaz návrhu - + X coordinate of next point X souřadnice dalšího bodu - + X X - + Y Y - + Z Z - + Y coordinate of next point Y souřadnice dalšího bodu - + Z coordinate of next point Z souřadnice dalšího bodu - + Radius Poloměr - + Radius of Circle Poloměr kruhu - + &Relative &Relativní - + Coordinates relative to last point or absolute (SPACE) Souřadnice vztažené k poslednímu bodu nebo absolutní (mezerník) - + F&illed Vyplněné - + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) Zaškrtněte, jestliže se má zobrazit objekt vyplněný, jinak se zobrazí jako drátěný (i) - + &Finish &Dokončit - + Finishes the current drawing or editing operation (F) Dokončí aktuální kreslicí nebo upravovací operaci (F) - + If checked, command will not finish until you press the command button again Je-li zaškrtnuto, příkaz se nedokončí, dokud nestisknete znovu na příkazové tlačítko - - &Continue - &Pokračovat - - - + If checked, an OCC-style offset will be performed instead of the classic offset Je-li zaškrtnuto, bude uplatněn OCC-styl odsazení namísto klasického odsazení - + &OCC-style offset &OCC-styl odstupu - + Add points to the current object - Add points to the current object + Přidá body k aktuálnímu objektu - + Remove points from the current object - Remove points from the current object + Odstraní body z aktuálního objektu - + Make Bezier node sharp - Make Bezier node sharp + Změní Beziérův uzel na ostrý - + Make Bezier node tangent - Make Bezier node tangent + Změní Beziérův uzel na tangentní - + Make Bezier node symmetric - Make Bezier node symmetric + Změní Beziérův uzel na symetrický - + &Undo &Zpět - + Undo the last segment (CTRL+Z) Vrátit zpět poslední segment (CTRL + Z) - + &Close &Zavřít - + Finishes and closes the current line (C) ukončí a zavře aktuální řádek (C) - + &Wipe &Vymazat - + Wipes the existing segments of this line and starts again from the last point (W) Vymaže dosavadní segmenty této čáry a začne z posledního bodu (W) - + Number of sides Počet stran - + Offset Odstup - + XY XY - + Select XY plane Vyberte rovinu XY - + XZ XZ - + Select XZ plane Vyberte rovinu XY - + YZ YZ - + Select YZ plane Vyberte rovinu YZ - + View Pohled - + Select plane perpendicular to the current view Vyberte rovinu kolmou na aktuální pohled - + Do not project points to a drawing plane nepromítat body do kreslící roviny - + &Copy &Kopírovat - + If checked, objects will be copied instead of moved (C) Je-li zaškrtnuta, objekty budou zkopírovány namísto přesunutý (C) - + Text string to draw - Text string to draw + Textový řetězec k vykreslení - + String Řetězec - + Height of text - Height of text + Výška textu - + Height Výška - + Intercharacter spacing - Intercharacter spacing + Rozestupy mezi znaky - + Tracking - Tracking + Sledování - + Full path to font file: - Full path to font file: + Úplná cesta k souboru písma: - + Open a FileChooser for font file - Open a FileChooser for font file + Otevře dialogové okno pro výběr souboru písma - + Set/unset a working plane - Set/unset a working plane + Nastavit pracovní rovinu - + Line Color Barva čáry - + Face Color Barva plochy - + Line Width Šířka čáry - + Font Size Velikost písma - + Apply to selected objects použít na vybrané objekty - + Toggles Construction Mode Přepíná konstrukční režim - + Select Plane Vyberte rovinu - + Line Čára - + DWire DWire - + Circle Kruh - + Center X Střed X - + Arc oblouk - + Point Bod - + Distance Distance - + Trim - Trim + Oříznout - + Pick Object Vybrat objekt - + Edit Upravit - + Global X - Global X + Globální X - + Global Y - Global Y + Globální Y - + Global Z - Global Z + Globální Z - + Local X - Local X + Lokální X - + Local Y - Local Y + Lokální Y - + Local Z - Local Z + Lokální Z - + Invalid Size value. Using 200.0. - Invalid Size value. Using 200.0. + Neplatná hodnota velikosti. Použito 200,0. - + Invalid Tracking value. Using 0. - Invalid Tracking value. Using 0. + Neplatná hodnota sledování. Použito 0. - + Please enter a text string. - Please enter a text string. + Vložte textový řetězec, prosím. - + Select a Font file - Select a Font file + Vyberte soubor písma - + Please enter a font file. - Please enter a font file. + Vložte, prosím, soubor písma. - + Draft.makeBSpline: not enough points - Draft.makeBSpline: not enough points + Draft.makeBSpline: nedostatek bodů - + Draft.makeBSpline: Equal endpoints forced Closed - Draft.makeBSpline: Equal endpoints forced Closed + Draft.makeBSpline: Shodné koncové body byly uzavřeny - + Draft.makeBSpline: Invalid pointslist - Draft.makeBSpline: Invalid pointslist + Draft.makeBSpline: Neplatný list bodů - + Found groups: closing each open object inside - Found groups: closing each open object inside + Nalezené skupiny: uzavírání všech otevřených objektů uvnitř - + Found mesh(es): turning into Part shapes - Found mesh(es): turning into Part shapes + Nalezena síť (sítě): změna na tvary dílce - + Found 1 solidificable object: solidifying it - Found 1 solidificable object: solidifying it + Nalezen 1 objekt k vytvoření tělesa: vytváření tělesa - + Found 2 objects: fusing them - Found 2 objects: fusing them + Nalezeny 2 objekty: jejich slučování - - Found several objects: making a shell - - Found several objects: making a shell - - - - - Found several coplanar objects or faces: making one face - - Found several coplanar objects or faces: making one face - - - - + Found 1 non-parametric objects: draftifying it - Found 1 non-parametric objects: draftifying it + Nalezen 1 neparametrický objekt: převádění na parametrický drát Draft - - Found 1 closed sketch object: making a face from it - - Found 1 closed sketch object: making a face from it - - - - - Found closed wires: making faces - - Found closed wires: making faces - - - - + Found 1 open wire: closing it - Found 1 open wire: closing it + nalezen 1 otevřený drát: jeho uzavírání - + Found several open wires: joining them - Found several open wires: joining them + Nalezeno několik drátů: jejich spojování - + Found several edges: wiring them - Found several edges: wiring them + Nalezeno několik hran: jejich spojování - - Found several non-treatable objects: making compound - - Found several non-treatable objects: making compound - - - - + Unable to upgrade these objects. - Unable to upgrade these objects. + Nelze povýšit tyto objekty. - + Found 1 block: exploding it - Found 1 block: exploding it + Nalezen 1 blok: jeho rozkládání - + Found 1 parametric object: breaking its dependencies - Found 1 parametric object: breaking its dependencies + Nalezen 1 parametrický objekt: rozbíjení jeho závislostí - + Found 2 objects: subtracting them - Found 2 objects: subtracting them + Nalezeny 2 objekty: jejich odečítání - + Found several faces: splitting them - Found several faces: splitting them + Nalezeno několik ploch: jejich rozdělování - + Found several objects: subtracting them from the first one - Found several objects: subtracting them from the first one + Nalezeno několik objektů: jejich odečítání od prvního - + Found 1 face: extracting its wires - Found 1 face: extracting its wires + Nalezena 1 plocha: extrahování jejích drátů - + Found only wires: extracting their edges - Found only wires: extracting their edges + Nalezeny pouze dráty: extrahování jejich hran - + No more downgrade possible Není možné další ponížení - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. + _BSpline.createGeometry: Uzavřeno s některým prvním/posledním bodem. Geometrie není aktualizovaná. - + Pick a face to define the drawing plane Vyberte si plochu pro definování kreslící roviny - + Pick first point: Vyberte první bod: - + Create Line - Create Line + Vytvoří čáru - + Create DWire - Create DWire + Vytvoří DWire - + DWire has been closed - DWire has been closed + DWire byl uzavřen - + Last point has been removed Poslední bod byl odstraněn - + Pick next point: Vyberte další bod: - + Pick next point, or (F)inish or (C)lose: Vyberte další bod, nebo (F) pro konec nebo (C) pro zavření: - + BSpline BSpline @@ -2273,423 +2332,587 @@ Values with differences below this value will be treated as same. Křivka byla uzavřena - + Create BSpline Vytvořit BSpline BezCurve - BezCurve + Beziérova křivka - + Bezier curve has been closed - Bezier curve has been closed + Beziérova křivka byla uzavřena - + Create BezCurve - Create BezCurve + Vytvoří Beziérovu křivku - + Rectangle Obdélník - + Create Plane - Create Plane + Vytvoří rovinu - + Create Rectangle Vytvořit obdélník - + Pick opposite point: Výběr protilehlého bodu: - + Pick center point: Výběr středového bodu: - + Pick radius: Vyberte poloměr: - + Pick start angle: Vyberte počáteční úhel: - + Pick aperture: Vyberte otvor: - + Create Circle Vytvořit kruh - + Create Arc Vytvořit oblouk - + Start Angle Počáteční úhel - + Aperture - Aperture + Průzor - + Aperture angle: Úhel otvoru: - + Polygon Mnohoúhelník - + Create Polygon Vytvořit mnohoúhelník - + Ellipse Elipsa - + Create Ellipse - Create Ellipse + Vytvoří elipsu - + Text Text - + Pick location point: Vyberte umístění bodu: - + Create Text Vytvořit text - + Dimension Rozměr - + Create Dimension Vytvořit kótu - + Edges don't intersect! Hrany se neprotínají! - + ShapeString - ShapeString + Tvar písma - + Pick ShapeString location point: - Pick ShapeString location point: + Zvolit bod umístění Tvaru písma: - + Create ShapeString - Create ShapeString + Vytvoří Tvar písma - + Move Přesun - + Select an object to move Vyberte objekt, který chcete přesunout - + Pick start point: Vyberte počáteční bod: - + Copy Kopírovat - + Pick end point: Vyberte koncový bod: - + Change Style Změnit styl - + Select an object to rotate Vyberte objekt, který chcete otočit - + Pick rotation center: Vyberte střed otáčení: - + Rotate Rotace - + Pick base angle: Vyberte základní úhel: - + Pick rotation angle: Vyberte úhel natočení: - + Select an object to offset Vyberte objekt pro vyrovnání - + Offset only works on one object at a time Ofset funguje pouze na jeden objekt najednou - + Cannot offset this object type Nelze ofsetovat tento typ objektu - + Pick distance: Vyberte vzdálenost: - + Select an object to upgrade Vyberte objekt pro povýšení - + Upgrade Povýšení - + Downgrade Ponížení - - Select an object to trim/extend - - Vyberte objekt pro oříznutí/rozšíření - - - + Scale Změna velikosti - + Select an object to scale Vyberte objekt ke změně velikosti - + Pick base point: Vyberte základní bod: - + Pick scale factor: Vybrat měřítko: - + Select an object to project - Select an object to project + Vyberte objekt k promítnutí - + Select a Draft object to edit - Select a Draft object to edit + Vyberte objekt Draft k editaci - + This object type is not editable - This object type is not editable + Tento typ objektu není upravitelný - + Active object must have more than two points/nodes - Active object must have more than two points/nodes + Aktivní objekt musí mít více než dva body/uzly - + Selection is not a Knot - Selection is not a Knot + Ve výběru není uzel - + Endpoint of BezCurve can't be smoothed - Endpoint of BezCurve can't be smoothed + Koncový uzel Beziérovy křivky nemůže být uhlazen - + Select an object to convert - Select an object to convert + Vyberte objekt k převedení - + Select an object to array - Select an object to array + Vyberte objekt pro pole - + Please select base and path objects - Please select base and path objects + Vyberte, prosím, základnu a objekt cesty - + Create Point - Create Point + Vytvoří bod - + Select an object to clone - Select an object to clone + Vyberte objekt pro klonování - + Select face(s) on existing object(s) - Select face(s) on existing object(s) + Vyberte plochu/y na existujícím objektu/objektech Teigha File Converter not found, DWG support is disabled. - Teigha File Converter not found, DWG support is disabled. + Převodník souborů Teigha nebyl nalezen, podpora DWG je vypnuta. - - Installed Macros - Instalovaná makra - - - + &Draft &Draft - + Utilities Nástroje - + Wire tools - Wire tools + Nástroje drátu - + Snapping - Snapping + Přichycení - + Found 1 multi-solids compound: exploding it - Found 1 multi-solids compound: exploding it + Nalezena 1 více-tělesová složenína: její rozkládání - + Sides - Sides + Strany + + + + BSplines and Bezier curves are not supported by this tool + BSpliny a Bezierovy křivky nejsou tímto nástrojem podporovány + + + + The given object is not planar and cannot be converted into a sketch. + Daný objekt není rovinný a nelze převést na náčrt. + + + + Found several objects: creating a shell + + Nalezeno několik objektů: vytváření skořepiny + + + + + Found several coplanar objects or faces: creating one face + + Nalezeno několik koplanárních objektů nebo ploch: vytváření jedné plochy + + + + + Found 1 linear object: converting to line + + Nalezen 1 lineární objekt: převádění do čáry + + + + + Found 1 closed sketch object: creating a face from it + + Nalezen 1 uzavřený náčrt: vytváření plochy z něj + + + + + Found closed wires: creating faces + + Nalezeny uzavřené dráty: vytváření plochy + + + + + Found several non-treatable objects: creating compound + + Nalezeno několik neléčitelných objektů: vytváření složeniny + + + + + Length + Délka + + + + Angle + Úhel + + + + Length of current segment + Délka aktuálního segmentu + + + + Angle of current segment + Úhel aktuálního segmentu + + + + Check this to lock the current angle (l) + Zaškrtněte pro uzamčení aktuálního úhlu (l) + + + + Con&tinue + Con&tinue + + + + &Select edge + Vybrat hranu + + + + Selects an existing edge to be measured by this dimension (E) + Vybere existující hranu pro měření pomocí této kóty (E) + + + + Auto + Automaticky + + + + Sorry, offset of Bezier curves is currently still not supported + + Je nám líto, ale odsazení Bezierovy křivky zatím není podporováno + + + + + Convert to Sketch + Převést na náčrt + + + + Convert to Draft + Převást na Návrh + + + + Convert + Převést + + + + Array + Pole + + + + Select object(s) to trim/extend + + Vyberte objekt(y) k oříznutí/rozšíření + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + Nelze oříznout tyto objekty, jsou podporovány pouze dráty Návrhu a oblouky + + + + + Unable to trim these objects, too many wires + + Nelze oříznout tyto objekty, příliš mnoho drátů + + + + + These objects don't intersect + + Tyto objekty se neprotínají + + + + + Too many intersection points + + Příliš mnoho průsečíků + + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + DXF import/export knihovny potřebné FreeCADem pro zpracování formátu DXF nebyly v systému nalezeny. +Prosím umožněte FreeCADu stáhnout tyto knihovny: + 1 - Otevřít workbench Návrh + 2 - Menu Upravit > Nastavení > Import-Export > DXF > Umožnit stahování +Nebo stáhnout tyto knihovny manuálně, jak je vysvětleno na +https://github.com/yorikvanhavre/Draft-dxf-importer diff --git a/src/Mod/Draft/Resources/translations/Draft_de.qm b/src/Mod/Draft/Resources/translations/Draft_de.qm index 5b2656cd84..d1e440a90f 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_de.qm and b/src/Mod/Draft/Resources/translations/Draft_de.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_de.ts b/src/Mod/Draft/Resources/translations/Draft_de.ts index 4a78033652..563f41e34b 100644 --- a/src/Mod/Draft/Resources/translations/Draft_de.ts +++ b/src/Mod/Draft/Resources/translations/Draft_de.ts @@ -1,511 +1,798 @@ - + + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + Herunterladen derDXF Bibliotheken ist fehlgeschlagen. +Bitte laden Sie sie von Hand herunter von +https://github.com/yorikvanhavre/Draft-dxf-importer +und kopieren Sie sie in Ihren Macro Ordner. + + Draft_AddPoint - + Add Point - Punkt hinzufügen + Punkt hinzufügen - + Adds a point to an existing wire/bspline - Fügt einen Punkt zu einer vorhandenen Linie/bspline + Fügt einen Punkt zu einer vorhandenen Linie/bspline Draft_AddToGroup - - Adds the selected object(s) to an existing group - Fügt die ausgewählten Objekte zu einer vorhandenen Gruppe + + Add to group... + Zur Gruppe hinzufügen... - - Add to group... - Zur Gruppe hinzufügen... + + Adds the selected object(s) to an existing group + Fügt die ausgewählten Objekte zu einer vorhandenen Gruppe Draft_ApplyStyle - + Apply Current Style - Aktuellen Style anwenden + Aktuellen Style anwenden - + Applies current line width and color to selected objects - Aktuelle Linienbreite und Farbe auf ausgewählte Objekte anwenden + Aktuelle Linienbreite und Farbe auf ausgewählte Objekte anwenden Draft_Arc - + Arc - Kreisbogen + Kreisbogen - + Creates an arc. CTRL to snap, SHIFT to constrain - Erzeugt einen Bogen. CTRL zum Einrasten, SHIFT zum Beschränken + Erzeugt einen Bogen. CTRL zum Einrasten, SHIFT zum Beschränken Draft_Array - + Array - Anordnung + Anordnung - + Creates a polar or rectangular array from a selected object - Erstellt eine polare oder rechteckige Anordnung des ausgewählten Objekts + Erstellt eine polare oder rechteckige Anordnung des ausgewählten Objekts Draft_BSpline - + B-Spline - B-Spline + B-Spline - + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain - Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain + + + + Draft_BezCurve + + + BezCurve + BezCurve + + + + Creates a Bezier curve. CTRL to snap, SHIFT to constrain + Erstellt eine Bézierkurve. STRG zum Einrasten, SHIFT zum Beschränken Draft_Circle - + Circle - Kreis + Kreis - + Creates a circle. CTRL to snap, ALT to select tangent objects - Erzeugt einen Kreis. STRG zum Einrasten, ALT um berührende Objekte auszuwählen + Erzeugt einen Kreis. STRG zum Einrasten, ALT um berührende Objekte auszuwählen Draft_Clone - + Clone - Klonen + Klonen - + Clones the selected object(s) - Ausgewählte Objekte klonen + Ausgewählte Objekte klonen Draft_CloseLine - + Close Line - Linie schließen + Linie schließen - + Closes the line being drawn - Schließt die gezeichnete Linie + Schließt die gezeichnete Linie Draft_DelPoint - + Remove Point - Punkt entfernen + Punkt entfernen - + Removes a point from an existing wire or bspline - Removes a point from an existing wire or bspline + Removes a point from an existing wire or bspline Draft_Dimension - + Dimension - Abmessung + Abmessung - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment - Erstellt eine Dimension. CTRL zum Einrasten, SHIFT zum Beschränken, ALT um ein Segment auszuwählen + Erstellt eine Dimension. CTRL zum Einrasten, SHIFT zum Beschränken, ALT um ein Segment auszuwählen Draft_Downgrade - + Downgrade - Herabstufen + Herabstufen - + Explodes the selected objects into simpler objects, or subtract faces - Sprengt die markierten Objekte in einfachere Objekte auf oder subtrahiert Oberflächen + Sprengt die markierten Objekte in einfachere Objekte auf oder subtrahiert Oberflächen Draft_Draft2Sketch - + Draft to Sketch - Entwurf zu Skizze + Entwurf zu Skizze Draft_Drawing - + Drawing - Zeichnung + Zeichnung - + Puts the selected objects on a Drawing sheet. - Puts the selected objects on a Drawing sheet. + Puts the selected objects on a Drawing sheet. Draft_Edit - + Edit - Bearbeiten + Bearbeiten - + Edits the active object - Bearbeitet das aktive Objekt + Bearbeitet das aktive Objekt + + + + Draft_Ellipse + + + Ellipse + Ellipse + + + + Creates an ellipse. CTRL to snap + Erstellt eine Ellipse. STRG zum Einrasten + + + + Draft_Facebinder + + + Facebinder + Flächengruppe + + + + Creates a facebinder object from selected face(s) + Erzeugt eine Flächengruppe aus den ausgewählten Flächen Draft_FinishLine - + Finish line - Linie beenden + Linie beenden - + Finishes a line without closing it - Beendet eine Linie, ohne sie zu schließen + Beendet eine Linie, ohne sie zu schließen + + + + Draft_FlipDimension + + + Flip Dimension + Maß umkehren + + + + Flip the normal direction of a dimension + Die normale Richtung des Maßes umkehren + + + + Draft_Heal + + + Heal + Heilen + + + + Heal faulty Draft objects saved from an earlier FreeCAD version + Stelle fehlerhafte Entwurfobjekte aus älteren FreeCAD Versionen wieder her Draft_Line - + Line - Linie + Linie - + Creates a 2-point line. CTRL to snap, SHIFT to constrain - Erzeugt Linie aus 2 Punkten. STRG zum Einrasten, SHIFT zum Beschränken + Erzeugt Linie aus 2 Punkten. STRG zum Einrasten, SHIFT zum Beschränken Draft_Move - + Move - Verschieben + Verschieben - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy - Verschiebt die ausgewählten Objekte zwischen 2 Punkten. CTRL zum Einrasten, SHIFT zum Beschränken, ALT zum Kopieren + Verschiebt die ausgewählten Objekte zwischen 2 Punkten. CTRL zum Einrasten, SHIFT zum Beschränken, ALT zum Kopieren Draft_Offset - + Offset - Versetzen + Versetzen - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy - Versetzt das aktive Objekt, STRG zum Einrasten, SHIFT zum Beschränken, ALT zum Kopieren + Versetzt das aktive Objekt, STRG zum Einrasten, SHIFT zum Beschränken, ALT zum Kopieren + + + + Draft_PathArray + + + PathArray + PfadDatenfeld + + + + Creates copies of a selected object along a selected path. + Erstellt Kopien eines ausgewählten Objekts entlang eines ausgewählten Pfades. Draft_Point - + Point - Punkt + Punkt - + Creates a point object - Erzeugt ein Punkt-Objekt + Erzeugt ein Punkt-Objekt Draft_Polygon - + Polygon - Polygon + Polygon - + Creates a regular polygon. CTRL to snap, SHIFT to constrain - Erstellt ein regelmäßiges Polygon. STRG = anfassen, SHIFT = einschränken + Erstellt ein regelmäßiges Polygon. STRG = anfassen, SHIFT = einschränken Draft_Rectangle - + Rectangle - Rechteck + Rechteck - + Creates a 2-point rectangle. CTRL to snap - Erstellt eine 2-Punkt-Rechteck. Einrasten mit STRG + Erstellt eine 2-Punkt-Rechteck. Einrasten mit STRG Draft_Rotate - + Rotate - Drehen + Drehen - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy - Dreht die ausgewählten Objekte. STRG zum Einrasten, SHIFT zum Beschränken, ALT erstellt eine Kopie + Dreht die ausgewählten Objekte. STRG zum Einrasten, SHIFT zum Beschränken, ALT erstellt eine Kopie Draft_Scale - + Scale - Skalieren + Skalieren - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy - Skaliert die markierten Objekte von einem Basispunkt. STRG zum Einrasten, SHIFT zum Beschränken, ALT zum Kopieren + Skaliert die markierten Objekte von einem Basispunkt. STRG zum Einrasten, SHIFT zum Beschränken, ALT zum Kopieren Draft_SelectGroup - + Select group - Wähle Gruppe + Wähle Gruppe - + Selects all objects with the same parents as this group - Wählt alle Objekte mit den selben Eltern wie diese Gruppe + Wählt alle Objekte mit den selben Eltern wie diese Gruppe Draft_SelectPlane - + SelectPlane - Ebene markieren + Ebene markieren - + Select a working plane for geometry creation - Markieren Sie eine Bearbeitungsebene für die Geometrieerstellung + Markieren Sie eine Bearbeitungsebene für die Geometrieerstellung Draft_Shape2DView - + Shape 2D view - Form in 2D Ansicht + Form in 2D Ansicht - + Creates Shape 2D views of selected objects - Erzeugt 2D Ansichten von ausgewählten Objekten + Erzeugt 2D Ansichten von ausgewählten Objekten - + Convert bidirectionally between Draft and Sketch objects - Bidirektional zwischen Draft und Sketch konvertieren + Bidirektional zwischen Draft und Sketch konvertieren + + + + Draft_ShapeString + + + Shape from text... + Form von Text... + + + + Creates text string in shapes. + Erzeugt eine Form aus einem Stück Text. Draft_ShowSnapBar - + Show Snap Bar - Zeige Fang-Symbolleiste + Zeige Fang-Symbolleiste - + Shows Draft snap toolbar - Entwurfs-Fang-Werkzeugleiste einblenden + Entwurfs-Fang-Werkzeugleiste einblenden + + + + Draft_Snap_Angle + + + Angles + Winkel + + + + Snaps to 45 and 90 degrees points on arcs and circles + Rastet auf 45- und 90 Grad-Punkten auf Bögen und Kreise ein + + + + Draft_Snap_Center + + + Center + Mittelpunkt + + + + Snaps to center of circles and arcs + Einrasten im Zentrum von Kreisen und Kreisbögen + + + + Draft_Snap_Dimensions + + + Dimensions + Abmessungen + + + + Shows temporary dimensions when snapping to Arch objects + Temporäre Bemaßungen beim Einrasten an Bogenobjekten anzeigen + + + + Draft_Snap_Endpoint + + + Endpoint + Endpunkt + + + + Snaps to endpoints of edges + Einrasten an den Endpunkten der Kanten + + + + Draft_Snap_Extension + + + Extension + Verlängerung + + + + Snaps to extension of edges + Einrasten an der Fortsetzung der Kanten + + + + Draft_Snap_Grid + + + Grid + Raster + + + + Snaps to grid points + An Rasterpunkten einrasten + + + + Draft_Snap_Intersection + + + Intersection + Schnitt + + + + Snaps to edges intersections + Einrasten an den Schnittkanten + + + + Draft_Snap_Lock + + + Toggle On/Off + Umschalten Ein/Aus + + + + Activates/deactivates all snap tools at once + Aktiviert/deaktiviert alle Rast-Tools auf einmal + + + + Draft_Snap_Midpoint + + + Midpoint + Mittelpunkt + + + + Snaps to midpoints of edges + Einrasten an den Mittelpunkten der Kanten + + + + Draft_Snap_Near + + + Nearest + Nächste + + + + Snaps to nearest point on edges + Einrasten am nächsten Punkt bei den Kanten + + + + Draft_Snap_Ortho + + + Ortho + Senkrecht + + + + Snaps to orthogonal and 45 degrees directions + Rastet in 45°-Winkeln und senkrecht ein + + + + Draft_Snap_Parallel + + + Parallel + Parallel + + + + Snaps to parallel directions of edges + Parallel zu Kanten einrasten + + + + Draft_Snap_Perpendicular + + + Perpendicular + Senkrecht + + + + Snaps to perpendicular points on edges + Rastet an Punkten senkrecht zu den Kanten ein + + + + Draft_Snap_WorkingPlane + + + Working Plane + Arbeitsebene + + + + Restricts the snapped point to the current working plane + Beschränkt den Rastpunkt auf die momentane Arbeitsebene Draft_Text - + Text - Text + Text - + Creates an annotation. CTRL to snap - Erzeugt eine Anmerkung. STRG zum Einrasten + Erzeugt eine Anmerkung. STRG zum Einrasten Draft_ToggleConstructionMode - + Toggle construcion Mode - Konstruktionsmodus umschalten + Konstruktionsmodus umschalten - + Toggles the Construction Mode for next objects. - Schaltet den Konstruktionsmodus für die nächsten Objekte um. + Schaltet den Konstruktionsmodus für die nächsten Objekte um. Draft_ToggleContinueMode - - Toggle continue Mode - Fortsetzungsmodus umschalten + + Toggle Continue Mode + In den Fortsetzungsmodus umschalten - + Toggles the Continue Mode for next commands. - Umschalten des Fortsetzungsmodus für nächste Befehle + Umschalten zum Fortsetzungsmodus für nächste Befehle Draft_ToggleDisplayMode - + Toggle display mode - Anzeige-Modus umschalten + Anzeige-Modus umschalten - + Swaps display mode of selected objects between wireframe and flatlines - Wechselt den Anzeigemodus der ausgewählten Objekte zwischen Drahtmodell und flatlines + Wechselt den Anzeigemodus der ausgewählten Objekte zwischen Drahtmodell und flatlines Draft_ToggleGrid - + Toggle Grid - Gitternetz umschalten + Gitternetz umschalten - - Toggles the Draft gid on/off - Entwurfsgitter ein-/ausschalten - - - - Draft_ToggleSnap - - - Toggle snap - Einrasten umschalten - - - - Toggles Draft snap on or off - Entwurfs-Fang aus-/anschalten + + Toggles the Draft grid on/off + Entwurfsgitter ein-/ausschalten Draft_Trimex - + Trimex - Trimex + Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts - Beschneidet oder erweitert das ausgewählte Objekt oder extrudiert einzelne Oberflächen. STRG fängt, Umschalttaste legt den derzeitigen Abschnitt als normal fest, ALT invertiert + Beschneidet oder erweitert das ausgewählte Objekt oder extrudiert einzelne Oberflächen. STRG fängt, SHIFT legt den derzeitigen Abschnitt als normal fest, ALT invertiert Draft_UndoLine - + Undo last segment - Letztes Segment rückgängig machen + Letztes Segment rückgängig machen - + Undoes the last drawn segment of the line being drawn - Letztes Segment rückgängig machen + Letztes Segment rückgängig machen Draft_Upgrade - + Upgrade - Hochstufen + Hochstufen - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces - Verbindet die markierten Objekte zu Einem, konvertiert Drähte zu abgerundeten Kanten oder verbindet Oberflächen + Verbindet die markierten Objekte zu Einem, konvertiert Drähte zu abgerundeten Kanten oder verbindet Oberflächen + + + + Draft_VisGroup + + + VisGroup + VisGroup + + + + Adds a VisGroup + Fügt eine VisGroup hinzu Draft_Wire - + DWire - DWire + DWire - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Erstellt einen Mehrpunkt-Entwurfsdraht (DWire). Strg zum Fangen, Umschalt für Bezüge + Erstellt einen Mehrpunkt-Entwurfsdraht (DWire). Strg zum Fangen, Umschalt für Bezüge Draft_WireToBSpline - + Wire to BSpline - Wire to BSpline + Wire to BSpline - + Converts between Wire and BSpline - Converts between Wire and BSpline + Converts between Wire and BSpline @@ -513,1520 +800,2144 @@ General Draft Settings - Generelle Entwurfs-Einstellungen + Generelle Entwurfs-Einstellungen - - Default color - Standardfarbe - - - + the default color for new objects - Standardfarbe für neue Objekte + Standardfarbe für neue Objekte - - Default linewidth - Standard-Linienbreite - - - + the default linewidth for new objects - Standard-Linienbreite für neue Objekte + Standard-Linienbreite für neue Objekte - - Snap color - Farbe einrasten - - - + the default color for snap symbols - Die Standardfarbe für Einrast Symbole + Die Standardfarbe für Einrast Symbole - - Construction color - Konstruktionsfarbe - - - + This is the default color for objects being drawn while in construction mode. - Dies ist die Standardfarbe für Objekte, die im Konstruktionsmodus gezeichnet werden. + Dies ist die Standardfarbe für Objekte, die im Konstruktionsmodus gezeichnet werden. - + This is the default group name for construction geometry - Dies ist der Standard-Gruppenname für die Konstruktionsgeometrie + Dies ist der Standard-Gruppenname für die Konstruktionsgeometrie - + Construction - Konstruktion + Konstruktion + + + + check this if you want to use the color/linewidth from the toolbar as default + Aktivieren Sie diese Option, wenn Sie die Farbe/Linienbreite aus der Symbolleiste als Standard verwenden möchten + + + + Save current color and linewidth across sessions + Speichern der aktuellen Farbe und Linienbreite in allen Sitzungen + + + + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode + Wenn dieses Kontrollkästchen aktiviert ist, wird der Kopiermodus über den Befehl hinaus gehalten, sonst beginnen Befehle immer im Nicht-Kopiermodus + + + + Global copy mode + Globaler Kopiermodus - check this if you want to use the color/linewidth from the toolbar as default - Aktivieren Sie diese Option, wenn Sie die Farbe/Linienbreite aus der Symbolleiste als Standard verwenden möchten - - - - Save current color and linewidth across sessions - Speichern der aktuellen Farbe und Linienbreite in allen Sitzungen - - - - If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode - Wenn dieses Kontrollkästchen aktiviert ist, wird der Kopiermodus über den Befehl hinaus gehalten, sonst beginnen Befehle immer im Nicht-Kopiermodus - - - - Global copy mode - Globaler Kopiermodus - - - - If this is checked, you will always snap to existing objects while drawing. If not, you will be snapping only when pressing CTRL. - Wenn dieses Kontrollkästchen aktiviert ist, werden Sie immer zu vorhandenen Objekten während des Zeichnens springen. Wenn nicht, werden Sie nur springen, wenn Sie STRG drücken. - - - If this is checked, objects will appear as filled as default. Otherwise, they will appear as wireframe - Wenn dieses Kontrollkästchen aktiviert ist, erscheinen die Objekte Standardfüllung. Andernfalls werden Sie als Drahtmodell angezeigt + Wenn dieses Kontrollkästchen aktiviert ist, erscheinen die Objekte Standardfüllung. Andernfalls werden Sie als Drahtmodell angezeigt - - Fill objects by default - Fülle Objekte standardmäßig - - - + Default working plane - Standard-Arbeitssebene + Standard-Arbeitssebene - + None - Kein + Kein - + XY (Top) - XY (oben) + XY (oben) - + XZ (Front) - XZ (vorne) + XZ (vorne) - + YZ (Side) - YZ (Seite) + YZ (Seite) - + The number of decimals in internal coordinates operations (for ex. 3 = 0.001) - Die Anzahl der Dezimalstellen in internen Koordinaten Operationen (z.B. 3 = 0,001) + Die Anzahl der Dezimalstellen in internen Koordinaten Operationen (z.B. 3 = 0,001) - - Default text height - Standard-Texthöhe - - - + Default height for texts and dimensions - Standardhöhe für Texte und Bemaßungen + Standardhöhe für Texte und Bemaßungen - - Default text font - Standard-Schriftart - - - + This is the default font name for all Draft texts and dimensions. It can be a font name such as "Arial", a default style such as "sans", "serif" or "mono", or a family such as "Arial,Helvetica,sans" or a name with a style such as "Arial:Bold" - Dies ist die Standard-Schriftart für alle Textentwürfe und Dimensionen. Es kann eine Schriftart wie "Arial", ein Standard-Stil wie "sans", "serif" oder "mono", oder eine Familie wie "Arial, Helvetica, sans" oder einen Namen mit einem Stil wie " Arial: Bold " sein + Dies ist die Standard-Schriftart für alle Textentwürfe und Dimensionen. Es kann eine Schriftart wie "Arial", ein Standard-Stil wie "sans", "serif" oder "mono", oder eine Familie wie "Arial, Helvetica, sans" oder einen Namen mit einem Stil wie " Arial: Bold " sein - - Arial - Arial - - - + Default template sheet - Standard Vorlage + Standard Vorlage - + The default template to use when creating a new drawing sheet - Die Standardvorlage zum Erstellen einer neuen Zeichnung + Die Standardvorlage zum Erstellen einer neuen Zeichnung - + Import style - Importiere Style + Importiere Style - - This is the method choosed for importing or translating DXF object color into FreeCAD. -If color mapping is choosed, you must choose a color mapping file containing a translation table that will convert colors into linewidths. - - Das ist die gewählte Methode, um DXF-Objektfarben in FreeCAD zu importieren. -Falls Farbzuordnung ausgewählt ist, müssen Sie eine Datei mit einer Look-up-Tabelle laden, die Farben in Linienstärken wandelt. - - - - + None (fastest) - Kein (schnellste) + Kein (schnellste) - + Use default color and linewidth - Benutze Standard Farbe und Linienstärke + Benutze Standard Farbe und Linienstärke - + Original color and linewidth - Ursprüngliche Farbe und Linienstärke + Ursprüngliche Farbe und Linienstärke - - Color mapped to linewidth - Farbe wird der Linienstärke zugeordnet - - - + if this is checked, paper space objects will be imported too - Falls aktiviert, werden Papierbereichs-Objekte ebenfalls importiert + Falls aktiviert, werden Papierbereichs-Objekte ebenfalls importiert - - Import layouts - Importiere Layouts - - - + if this is unchecked, texts/mtexts won't be imported - Wenn dies deaktiviert ist, wird texts/mtexts nicht importiert + Wenn dies deaktiviert ist, wird texts/mtexts nicht importiert - - Color mapping file - Datei zur Farbzuordung - - - - The color mapping file for translating dxf colors into linewidths - Die Datei zur Zuordnung von Farben zu Linienstärken - - - - Max Spline Segment - Max Spline-Segment - - - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. - Wenn Splines in DXF exportiert werden, werden sie in Polygonzüge umgewandelt. Dieser Wert ist die maximale Länge eines Segments des Polygonzuges. Falls 0, wird die ganze Spline-Kurve als ein Geradenstück behandelt. + Wenn Splines in DXF exportiert werden, werden sie in Polygonzüge umgewandelt. Dieser Wert ist die maximale Länge eines Segments des Polygonzuges. Falls 0, wird die ganze Spline-Kurve als ein Geradenstück behandelt. - + This is the method choosed for importing SVG object color into FreeCAD. - Das ist die ausgewählt Methode, SVG-Objektefarben in FreeCAD zu importieren. + Das ist die ausgewählt Methode, SVG-Objektefarben in FreeCAD zu importieren. - + Check this if you want the areas (3D faces) to be imported too. - Aktivieren Sie dies, falls Sie die 3D-Flächen ebenfalls importien möchten. + Aktivieren Sie dies, falls Sie die 3D-Flächen ebenfalls importien möchten. - + Import OCA areas - Importiert OCA Bereiche + Importiert OCA Bereiche General settings - Allgemeine Einstellungen + Allgemeine Einstellungen - + Construction group name - Konstruktionsgruppenname + Konstruktionsgruppenname - + Tolerance - Toleranz + Toleranz - + This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. - Dieser Wert wird von Funktionen verwendet, die Toleranzen benutzen. + Dieser Wert wird von Funktionen verwendet, die Toleranzen benutzen. Werte mit Differenzen unterhalb diesen Wertes werden als gleich behandelt. - - Dimensions & Leader arrow style - Abmessungs & Führungspfeil-Stil - - - - Dot 5 - Punkt 5 - - - - Dot 7 - Punkt 7 - - - - Dot 9 - Punkt 9 - - - - Circle 5 - Kreis 5 - - - - Circle 7 - Kreis 7 - - - - Circle 9 - Kreis 9 - - - - Slash 5 - Slash 5 - - - - Slash 7 - Slash 7 - - - - Slash 9 - Slash 9 - - - - Backslash 5 - Backslash 5 - - - - Backslash 7 - Backslash 7 - - - - Backslash 9 - Backslash 9 - - - - Import/Export - Importieren / Exportieren - - - + DXF format options - DXF-Format Optionen + DXF-Format Optionen - - Import texts and dimensions - Importieren von Texten und Dimensionen - - - + Check this if you want the non-named blocks (beginning with a *) to be imported too - Aktivieren Sie diese Option, wenn Sie nicht benannte Blöcke (beginnend mit a *) auch importieren möchten + Aktivieren Sie diese Option, wenn Sie nicht benannte Blöcke (beginnend mit a *) auch importieren möchten - - Import *blocks - *blocks importieren - - - + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... - Falls aktiviert, werden zusammentreffende Objekte als Linienzüge (Wires) zusammengefasst. Achtung, dies kann einige Zeit in Anspruch nehmen... + Falls aktiviert, werden zusammentreffende Objekte als Linienzüge (Wires) zusammengefasst. Achtung, dies kann einige Zeit in Anspruch nehmen... - + Join geometry - Geometrie vereinen + Geometrie vereinen - + SVG format options - Einstellungen für SVG Format + Einstellungen für SVG Format - + OCA format options - Einstellungen für OCA Format + Einstellungen für OCA Format - + Alternate SVG Patterns location - Alternative SVG-Muster + Alternative SVG-Muster - + Here you can specify a directory containing SVG files containing <pattern> definitions that can be added to the standard Draft hatch patterns - Hier können Sie ein Verzeichnis angeben, das SVG-Dateien mit <pattern>-Definitionen enthält. Diese werden zu den Standard-Entwurfs-Schraffierungsmustern hinzugefügt + Hier können Sie ein Verzeichnis angeben, das SVG-Dateien mit <pattern>-Definitionen enthält. Diese werden zu den Standard-Entwurfs-Schraffierungsmustern hinzugefügt - + Draft interface mode - Entwurfsoberflächen-Modus + Zeichnungsschnittstellen-Modus - + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction - Dies ist der UI-Modus in dem das Zeichenmodul arbeiten wird: Der Werkzeugleistenmodus wird alle Zeichnungseinstellungen in einer separaten Werkzeugleiste plazieren,während der Aufgabenleistemodus das FreeCAD Aufgabenübersichts-System für jegliche Benutzerinteraktion nutzen wird + Dies ist der UI-Modus in dem das Zeichenmodul arbeiten wird: Der Werkzeugleistenmodus wird alle Zeichnungseinstellungen in einer separaten Werkzeugleiste plazieren,während der Aufgabenleistemodus das FreeCAD Aufgabenübersichts-System für jegliche Benutzerinteraktion nutzen wird - + Toolbar - Werkzeugleiste + Werkzeugleiste - + Taskview - Aufgabenüberblick + Aufgabenüberblick - + Constrain mod - Randbedingungsmodus + Beschränkungsmodus - + The Constraining modifier key - Die Randbedingungsmodus-Taste + Die Randbedingungsmodus-Taste - + shift - Umschalt + Umschalt - + ctrl - Strg + Strg - + alt - Alt + Alt - + Snap mod - Fangmodus + Fangmodus + + + + The snap modifier key + Die Fangmodustaste + + + + Alt mod + Alternativer Modus + + + + The alt modifier key + Die alternative Modus-Taste + + + + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. + Normalerweise wird nach dem Kopieren von Objekten die Kopie ausgewählt. Mit dieser Option werden stattdessen die ursprünglichen Objekte ausgewählt. + + + + Select base objects after copying + Wähle ursprüngliche Objekte nach dem Kopieren aus + + + + If checked, a grid will appear when drawing + Wenn gesetzt, erscheint ein Raster beim Zeichnen + + + + Use grid + Raster verwenden + + + + Grid spacing + Rasterabstand + + + + The spacing between each grid line + Der Abstand zwischen jeder Rasterlinie + + + + Main lines every + Hauptlinien alle + + + + Mainlines will be drawn thicker. Specify here how many squares between mainlines. + Hauptlinien werden dicker gezeichnet. Legen Sie hier fest, wie viele Kästchen zwischen den Hauptlinien sein sollen. + + + + Internal precision level + Interner Präzisionsgrad - The snap modifier key - Die Fangmodustaste - - - - Alt mod - Alternativer Modus - - - - The alt modifier key - Die alternative Modus-Taste - - - - Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. - Normalerweise wird nach dem Kopieren von Objekten die Kopie ausgewählt. Mit dieser Option werden stattdessen die ursprünglichen Objekte ausgewählt. - - - - Select base objects after copying - Wähle ursprüngliche Objekte nach dem Kopieren aus - - - - Always snap to objects (disable snap mod key) - Fange immer Objekte (deaktiviere Fangmodustaste) - - - - The radius for snapping to special points. Set to 0 for no distance (infinite) - Der Radius für Fangen von speziellen Punkten. Setze auf Null für keinen Abstand (infinitisemal) - - - - Snap range - Fangbereich - - - - px - px - - - - If checked, a grid will appear when drawing - Wenn gesetzt, erscheint ein Raster beim Zeichnen - - - - Use grid - Raster verwenden - - - - Grid spacing - Rasterabstand - - - - The spacing between each grid line - Der Abstand zwischen jeder Rasterlinie - - - - Main lines every - Hauptlinien alle - - - - Mainlines will be drawn thicker. Specify here how many squares between mainlines. - Hauptlinien werden dicker gezeichnet. Legen Sie hier fest, wie viele Kästchen zwischen den Hauptlinien sein sollen. - - - - Internal precision level - Interner Präzisionsgrad - - - Dimensions precision level - Präzisionsgrad der Bemaßung + Präzisionsgrad der Bemaßung - - Vertical dimensions text orientation - Orientierung der vertikalen Bemaßungstexte - - - + This is the orientation of the dimension texts when those dimensions are vertical. Default is left, which is the ISO standard. - Dies ist die Orientierung der Bemaßungstexte, wenn sie vertikal sind. Standard ist wie im ISO-Standard links. + Dies ist die Orientierung der Bemaßungstexte, wenn sie vertikal sind. Standard ist wie im ISO-Standard links. - + Left (ISO standard) - Links (ISO-Standard) + Links (ISO-Standard) - + Right - Rechts + Rechts - - Create parametric objects - Parametrische Objekte erstellen - - - + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable - Wenn dies ausgewählt wird, werden Objekte der gleichen Ebene in einem Zeichnungsblock miteinander verbunden, sodass zwar die Ansicht schneller gedreht, aber die Bearbeitung schwieriger wird. + Wenn dies gesetzt ist, werden Objekte der gleichen Ebene mit einander in einem Zeichnungsblock verbunden, sodass die Ansicht schneller gedreht, aber die Bearbeitung schwieriger wird - + Group layers into blocks - Gruppiere Ebenen in Blöcken + Gruppiere Ebenen in Blöcken - + If this is checked, all objects containing faces will be exported as 3d polyfaces - Falls dies angewählt ist, werden all Objekte mit Oberflächen als 3D Polyfaces exportiert + Falls dies angewählt ist, werden alle Objekte mit Oberflächen als 3D Polyfaces exportiert - + Export 3D objects as polyface meshes - 3D Objekte als Polyface Meshes exportieren + 3D Objekte als Polyface Meshes exportieren If this is checked, the Draft workbench won't appear. Useful since all of the Draft tools are also in the Arch workbench. - Wenn aktiviert, erscheint die Entwurfs-Arbeitsumgebung nicht. Nützlich, da die Arch-Arbeitsumgebung alle Entwurfs-Werkzeuge enthält. + Wenn aktiviert, erscheint die Entwurfs-Arbeitsumgebung nicht. Nützlich, da die Arch-Arbeitsumgebung alle Entwurfs-Werkzeuge enthält. Hide Draft workbench - Entwurfs-Arbeitsumgebung ausblenden + Entwurfs-Arbeitsumgebung ausblenden - - If this is checked, snapping will not occur against objects with more than the indicated number of edges - Nicht an Objekten mit mehr Kanten als angegeben fangen - - - - Snap maximum - Fang Maximum - - - - Maximum number of edges to be considered for snapping - Maximale Anzahl an Kanten die für Fangen in Frage kommen - - - - Maximum number of edges - Maximale Anzahl an Kanten - - - + If checked, the Snap toolbar will be shown whenever you use snapping - Zeige Fang-Symbolleiste immer wenn Fangen genutzt wird + Zeige Fang-Symbolleiste immer wenn Fangen genutzt wird - + Show Draft Snap toolbar - Entwurfs-Fang-Werkzeugleiste einblenden + Entwurfs-Fang-Werkzeugleiste einblenden - + Hide Draft snap toolbar after use - Entwurfs-Fang-Werkzeugleiste nach Verwendung ausblenden + Entwurfs-Fang-Werkzeugleiste nach Verwendung ausblenden - + if checked, a widget indicating the current working plane orientation appears during drawing operations - Wenn aktiviert, wird während dem Zeichnen die Ausrichtung der Arbeitsebene angezeigt + Wenn aktiviert, wird während dem Zeichnen die Ausrichtung der Arbeitsebene angezeigt - + Show Working Plane tracker - Arbeitsebenen-Tracker anzeigen + Arbeitsebenen-Tracker anzeigen - + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command - Wenn aktiviert, ist das Entwurfs-Gitter stets eingeblendet, wenn die Entwurfs-Arbeitsumgebung verwendet wird. Sonst nur, wenn ein Befehl verwendet wird + Wenn aktiviert, ist das Entwurfsraster stets eingeblendet, wenn die Entwurfs-Arbeitsumgebung verwendet wird. Sonst nur, wenn ein Befehl verwendet wird - - Always show - Immer Anzeigen - - - - Create Sketches - Skizzen erstellen - - - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document - Wenn aktiviert, erhalten importierte Texte die standardmäßige Entwurfs-Schriftgröße, statt ihrer Ursprungsgröße im DXF Dokument + Wenn aktiviert, erhalten importierte Texte die standardmäßige Entwurfs-Schriftgröße, statt ihrer Ursprungsgröße im DXF Dokument - + Use standard font size for texts - Standard Schriftgröße für Texte verwenden + Standard Schriftgröße für Texte verwenden - + If this is checked, hatches will be converted into simple wires - Wenn gesetzt, werden Schraffuren in einfache Drähte umgewandelt + Wenn gesetzt, werden Schraffuren in einfache Drähte umgewandelt - + Import hatch boundaries as wires - Fügt Schraffurgrenzen als Drähte hinzu + Fügt Schraffurgrenzen als Drähte hinzu - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width - Wenn aktiviert, werden Polylinien mit definierter Breite als geschlossener Draht mit der richtigen Dicke gerendert + Wenn aktiviert, werden Polylinien mit definierter Breite als geschlossener Draht mit der richtigen Dicke gerendert - + Render polylines with width - Polylinien mit Breite rendern + Polylinien mit Breite rendern - - Export Style - Export-Stil - - - + Style of SVG file to write when exporting a Sketch. - SVG-Typ bei Skizzen-Export. + SVG-Typ bei Skizzen-Export. - + Translated (for print & display) - Angepasst (für Druck und Anzeige) + Angepasst (für Druck und Anzeige) - + Raw (for CAM) - Roh (für CAM) + Roh (für CAM) - + When exporting SVG views, make all white linework appear in black, for better readability against white backgrounds - Bei SVG-Export, wandle weiße Linien in schwarze, zwecks besserer Lesbarkeit auf weißen Hintergründen + Bei SVG-Export, wandle weiße Linien in schwarze, zwecks besserer Lesbarkeit auf weißen Hintergründen - + Translate white line color to black - Weiße Linienfarbe in schwarze umwandeln + Weiße Linienfarbe in schwarze umwandeln + + + + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. + Wenn diese Option aktiviert ist, erstellt das Entwurfs-Tool falls verfügbar Grundkörper anstelle von Draft-Objekten. + + + + Use Part Primitives when available + Benutze Grundkörper falls möglich + + + + Snapping + Objektfang + + + + If this is checked, snapping is activated without the need to press the snap mod key + Falls aktiviert, rastet der Cursor auch ohne gedrückte Einrasttaste ein + + + + Always snap (disable snap mod) + Rastmodus ständig aktiviert (deaktiviert den Rastmodus-Umschalter) + + + + Construction geometry + Konstruktionsgeometrie + + + + Construction geometry color + Hilfsgeometrie-Farbe + + + + Import + Import + + + + texts and dimensions + Texte und Bemaßungen + + + + points + Punkte + + + + layouts + Layouts + + + + *blocks + *blocks + + + + If this is checked, the exported objects will be projected to reflect the current view direction + Falls aktiviert werden exportierte Objekte entsprechend der momentanen Blickrichtung projiziert + + + + Project exported objects along current view direction + Projiziere exportierte Objekte entlang der aktuellen Blickrichtung + + + + Ellipse export is badly supported. Use this to export them as polylines instead. + Der Export von Ellipsen wird nur teilweise unterstützt. Mit dieser Option werden diese stattdessen als Polygonzüge exportiert. + + + + DWG format options + DWG-Formatoptionen + + + + Path to Teigha File Converter + Pfad zum Teigha-Dateikonverter + + + + The path to your Teigha File Converter executable + Der Dateipfad zur Ausführungsdatei des TEIGHA FILE CONVERTER + + + + Visual settings + Visuelle Einstellungen + + + + Visual Settings + Visuelle Einstellungen + + + + Default line color + Standard-Kantenfarbe + + + + Default line width + Standard-Linienbreite + + + + Snap symbols style + Einrastsymbolstil + + + + Draft classic style + Klassischer Entwurfsstil + + + + Bitsnpieces style + Kleinkram Stil + + + + Color + Farbe + + + + Hatch patterns resolution + Schraffur-Muster Auflösung + + + + Grid + Raster + + + + Always show the grid + Raster immer anzeigen + + + + Texts and dimensions + Texte und Bemaßungen + + + + Texts + Texte + + + + font + Schriftart + + + + Internal font + Interne Schriftart + + + + size + Größe + + + + Dimensions arrows + Maßpfeile + + + + style + Stil + + + + Dot + Punkt + + + + Circle + Kreis + + + + Arrow + Pfeil + + + + The default size of arrows + Die Standardgröße der Pfeile + + + + The default size of dimensions extension lines + Die Standardgröße der Maßhilfslinien + + + + Dimensions text + Bemaßungstext + + + + orientation + Ausrichtung + + + + spacing + Abstand + + + + The space between the dimension line and the dimension text + Der Abstand zwischen der Maßlinie und dem Bemaßungstext + + + + Default ShapeString Font File + Datei mit standard Schriftart für Textformen + + + + Select a font file + Wählen Sie eine Schriftartdatei aus + + + + Fill objects with faces whenever possible + Falls möglich, zeige Objekte mit Flächen an + + + + Create + Erstellen + + + + simple Part shapes + Einfache Grundkörper-Formen + + + + If this is checked, parametric Draft objects will be created whenever possible + Wenn aktiviert, werden immer wenn möglich parametrische Draft-Objekte erstellt + + + + Draft objects + Entwurfs-Objekte + + + + If this is checked, sketches will be created whenever possible + Wenn aktiviert, werden immer wenn möglich Skizzen erstellt + + + + Sketches + Skizzen + + + + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. + Wenn aktiviert, werden die Farben des DXF-Objektes übernommen wenn möglich. Andernfalls werden Standard-Farben zugewiesen. + + + + Get original colors from the DXF file + Hole die Original-Farben aus der DXF-Datei + + + + Treat ellipses and splines as polylines + Behandle Ellipsen und Splines wie Polylinien + + + + Max Spline Segment: + Höchstanzahl von Liniensegmenten für Splines: + + + + Export style + Export-Stil + + + + Snapping settings + Rast-Optionen + + + + Show the unit suffix in dimensions + Zeige das Einheiten-Suffix in den Abmessungen + + + + DXF / DWG + DXF / DWG + + + + Automatic update + Automatische Updates + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + Indem Sie diesen Punkt anhaken, erlauben Sie FreeCAD, die Komponenten, die für den DXF Im- und Export nötig sind, automatisch herunter zu laden und zu aktualisieren. Sie können dies auch manuell durch den Besuch von https://github.com/yorikvanhavre/Draft-dxf-importer machen + + + + Allow FreeCAD to automatically download and update the DXF libraries + FreeCAD das automatische Herunterladen und Aktualisieren der DXF-Bibliotheken erlauben + + + + If this is checked, only standard Part objects will be created (fastest) + Wenn aktiviert, werden nur Standard-Grundkörper erstellt (schnellste Möglichkeit) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + Wenn diese Option aktiviert ist, werden DXF-Layer als Draft VisGroups importiert + + + + Use VisGroups + Verwenden Sie VisGroups + + + + mm + mm + + + + SVG / OCA + SVG / OCA + + + + Grid size + Rastergröße + + + + the number of horizontal or vertical lines of the grid + die Anzahl der horizontalen oder vertikalen Linien des Rasters + + + + lines + Linien + + + + Dimensions + Abmessungen + + + + display mode + Anzeigemodus + + + + text above (2D) + Text oberhalb (2D) + + + + text inside (3D) + Text innerhalb (3D) + + + + extension lines size + Hilfslinien-Überstand + + + + Drawing views + Zeichnungsansichten + + + + Dashed line definition + Gestrichelte Linien-Definition + + + + A SVG linestyle definition + Eine SVG-Linienart-Definition + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + Strich-Punkt-Linien-Definition + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Gepunktete-Linien-Definition + + + + 0.02,0.02 + 0.02,0.02 + + + + Workbench + + + Draft Snap + Entwurfs-Einrastung + + + + Draft creation tools + Werkzeuge zur Erstellung von Entwürfen + + + + Draft modification tools + Werkzeuge zur Bearbeitung von Entwürfen draft - + + Draft Command Bar + Entwurfsbefehlsleiste + + + active command: - aktiver Befehl: + aktiver Befehl: + + + + None + Kein + + + + Active Draft command + Aktiver Draft-Befehl + + + + X coordinate of next point + X-Koordinate des nächsten Punktes + + + + X + X + + + + Y + Y + + + + Z + Z + + + + Y coordinate of next point + Y-Koordinate des nächsten Punktes - None - Kein - - - - Active Draft command - Aktiver Draft-Befehl - - - - X coordinate of next point - X-Koordinate des nächsten Punktes - - - - X - X - - - - Y - Y - - - - Z - Z - - - - Y coordinate of next point - Y-Koordinate des nächsten Punktes - - - Z coordinate of next point - Z-Koordinate des nächsten Punktes + Z-Koordinate des nächsten Punktes + + + + Radius + Radius + + + + Radius of Circle + Kreisradius + + + + &Relative + &Relativ + + + + Coordinates relative to last point or absolute (SPACE) + Koordinaten relativ zum letzten Punkt oder absolut (Leertaste) + + + + F&illed + Gefüllt + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) + Hier anwählen falls das Objekt gefüllte erscheinen soll, sonst erscheint es als Drahtgitter (i) + + + + &Finish + &Beenden + + + + Finishes the current drawing or editing operation (F) + Momentanen Zeichnungs- oder Editier-Operation (F) beenden + + + + If checked, command will not finish until you press the command button again + Falls aktiviert, wird Befehl nicht beendet bis Sie den Befehlsknopf nochmals drüchen + + + + If checked, an OCC-style offset will be performed instead of the classic offset + Verwende OCC Versatz statt klassischem Versatz + + + + &OCC-style offset + OCC Versatz + + + + Add points to the current object + Punkte zu momentanem Objekt hinzufügen + + + + Remove points from the current object + Punkte von momentanem Objekt entfernen + + + + Make Bezier node sharp + Mache Bezier Knoten zu Eckknoten + + + + Make Bezier node tangent + Mache Bezier Knoten tangential + + + + Make Bezier node symmetric + Mache Bezier Knoten symmetrisch + + + + &Undo + &Rückgängig + + + + Undo the last segment (CTRL+Z) + Letztes Segment rückgängig machen (Strg+Z) + + + + &Close + S&chließen + + + + Finishes and closes the current line (C) + Beendet und schließt die aktuelle Linie (C) + + + + &Wipe + &Radieren + + + + Wipes the existing segments of this line and starts again from the last point (W) + Löscht vorhandene Segmente dieser Linie und beginnt nochmals vom letzten Punkt (W) + + + + Number of sides + Anzahl der Seiten + + + + Offset + Versetzen + + + + XY + XY + + + + Select XY plane + XY-Ebene auswählen + + + + XZ + XZ + + + + Select XZ plane + XY-Ebene auswählen + + + + YZ + YZ + + + + Select YZ plane + YZ-Ebene wählen + + + + View + Ansicht + + + + Select plane perpendicular to the current view + Wählen Sie eine Ebene senkrecht zur momentanen Blickrichtung aus + + + + Do not project points to a drawing plane + Punkt nicht auf Zeichenebene projizieren - Radius - Radius + &Copy + &Kopieren - - Radius of Circle - Kreisradius - - - - Coordinates relative to last point or absolute (SPACE) - Koordinaten relativ zum letzten Punkt oder absolut (Leertaste) - - - - Undo the last segment (CTRL+Z) - Letztes Segment rückgängig machen (Strg+Z) - - - - Finishes and closes the current line (C) - Beendet und schließt die aktuelle Linie (C) - - - - Offset - Versetzen - - - - XY - XY - - - - Select XY plane - XY-Ebene auswählen - - - - XZ - XZ - - - - Select XZ plane - XY-Ebene auswählen - - - - YZ - YZ - - - - Select YZ plane - YZ-Ebene wählen - - - - View - Ansicht - - - - Select plane perpendicular to the current view - Wählen Sie eine Ebene senkrecht zur momentanen Blickrichtung aus - - - - Do not project points to a drawing plane - Punkt nicht auf Zeichenebene projizieren - - - + If checked, objects will be copied instead of moved (C) - Falls gesetzt, Objekte werden kopiert anstatt verschoben (C) + Falls gesetzt, Objekte werden kopiert anstatt verschoben (C) - + + Text string to draw + Zu zeichnende Textzeichenkette + + + + String + Zeichenkette + + + + Height of text + Höhe des Textes + + + + Height + Höhe + + + + Intercharacter spacing + Zeichenabstand + + + + Tracking + Verfolgung + + + + Full path to font file: + Vollständiger Pfad zur Schriftdatei: + + + + Open a FileChooser for font file + Schriftartendatei auswählen + + + + Set/unset a working plane + Eine Arbeitsebene festlegen/aufheben + + + Line Color - Linienfarbe + Linienfarbe - + Face Color - Oberflächenfarbe + Oberflächenfarbe - + Line Width - Linienbreite + Linienbreite - + Font Size - Schriftgröße + Schriftgröße - + Apply to selected objects - Auf selektierte Objekte anwenden + Auf selektierte Objekte anwenden - + Toggles Construction Mode - Konstruktionsmodus umschalten + Konstruktionsmodus umschalten - + Select Plane - Ebene auswählen + Ebene auswählen - + Line - Linie + Linie - + + DWire + DWire + + + Circle - Kreis + Kreis - + Center X - Mittelpunkt X + Mittelpunkt X - + Arc - Kreisbogen + Kreisbogen - + + Point + Punkt + + + + Distance + Abstand + + + + Trim + Beschneiden + + + Pick Object - Objekt wählen + Objekt wählen - - draft Command Bar - Entwurf Befehlsleiste + + Edit + Bearbeiten - + + Global X + Globales X + + + + Global Y + Globales Y + + + + Global Z + Globales Z + + + + Local X + Lokales X + + + + Local Y + Lokales Y + + + + Local Z + Lokales Z + + + + Invalid Size value. Using 200.0. + Ungültiger Größenwert. 200,0 wird verwendet. + + + + Invalid Tracking value. Using 0. + Ungültiger Wert für Laufweite. Verwende stattdessen 0. + + + + Please enter a text string. + Bitte geben Sie eine Textzeichenkette ein. + + + + Select a Font file + Wählen Sie eine Schriftartdatei aus + + + + Please enter a font file. + Bitte geben Sie eine Schriftdatei an. + + + + Draft.makeBSpline: not enough points + + Draft.makeBSpline: nicht genügend Punkte + + + + + Draft.makeBSpline: Equal endpoints forced Closed + + Draft.makeBSpline: Identische Start und Endpunkte gefunden, erzwinge geschlossene Kurve + + + + + Draft.makeBSpline: Invalid pointslist + + Draft.makeBSpline: Ungültige Punkteliste + + + + + Found groups: closing each open object inside + + Gruppen gefunden: jedes Objekt innerhalb wird geschlossen + + + + + Found mesh(es): turning into Part shapes + + Objekt-Netze gefunden: werden in Grundkörper-Formen transferiert + + + + Found 1 solidificable object: solidifying it + + 1 Objekt mit Möglichkeit zum Verwandeln in Solid gefunden. Wird verwandelt + + + + Found 2 objects: fusing them + + 2 Objekte gefunden: werden vereinigt + + + + + Found 1 non-parametric objects: draftifying it + + 1 nicht-parametrisches Objekt gefunden: erstelle Entwurfsobjekt daraus + + + + + Found 1 open wire: closing it + + 1 offenen Linienzug gefunden: schließen + + + + + Found several open wires: joining them + + Mehrere ungeschlossene Drähte gefunden: Verbinde sie + + + + + Found several edges: wiring them + + Mehrere Kanten gefunden: erstelle eine Linienzug daraus + + + + + Unable to upgrade these objects. + + Diese Objekte können nicht zusammengeführt werden. + + + + + Found 1 block: exploding it + + Ein Block gefunden: zerlege ihn + + + + + Found 1 parametric object: breaking its dependencies + + 1 parametrisches Objekt gefunden: löse Abhängigkeiten auf + + + + + Found 2 objects: subtracting them + + 2 Objekte gefunden: subtrahieren + + + + + Found several faces: splitting them + + Mehrere Flächen gefunden: aufbrechen + + + + + Found several objects: subtracting them from the first one + + Mehrere Objekte gefunden: diese vom ersten Objekt subtrahieren + + + + + Found 1 face: extracting its wires + + 1 Fläche gefunden: seine Linienzüge extrahieren + + + + + Found only wires: extracting their edges + + Nur Linienzüge gefunden: extrahieren ihre Kanten + + + + + No more downgrade possible + + Kein weiteres Downgrade möglich + + + + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. + + _BSpline.createGeometry: Geschlossene Kurve mit identischem Start- und Endpunkt gefunden. Geometrie wurde nicht aktualisiert. + + + + Pick a face to define the drawing plane - Zum Definieren der Arbeitsebene Oberfläche auswählen + Zum Definieren der Arbeitsebene Oberfläche auswählen - + Pick first point: - Ersten Punkt auswählen: + Ersten Punkt auswählen: - + + Create Line + Linie erstellen + + + + Create DWire + Entwurfsdraht (DWire) erstellen + + + + DWire has been closed + + DWire wurde geschlossen + + + + Last point has been removed + + Letzter Punkt wurde entfernt + + + + Pick next point: - Nächsten Punkt auswählen: + Nächsten Punkt auswählen: - + Pick next point, or (F)inish or (C)lose: - Nächsten Punkt auswählen, Beenden (F) oder S(c)hließen : + Nächsten Punkt auswählen, Beenden (F) oder S(c)hließen : - + + BSpline + BSpline + + + + Spline has been closed + + Spline wurde geschlossen + + + + + Create BSpline + BSpline erstellen + + + + BezCurve + BezCurve + + + + Bezier curve has been closed + + Bézierkurve wurde geschlossen + + + + + Create BezCurve + Erstelle BezCurve + + + + Rectangle + Rechteck + + + + Create Plane + Ebene erstellen + + + + Create Rectangle + Rechteck erstellen + + + Pick opposite point: - Gegenüberliegenden Punkt auswählen: + Gegenüberliegenden Punkt auswählen: - + Pick center point: - Mittelpunkt auswählen: + Mittelpunkt auswählen: + + + Pick radius: + + Radius auswählen: + + + + + Pick start angle: + + Startwinkel auswählen: + + + + + Pick aperture: + + Wählen Sie Aperture: + + + + + Create Circle + Kreis erstellen + + + + Create Arc + Bogen erstellen + + + + Start Angle + Startwinkel + + + + Aperture + Öffnungswinkel + - Pick radius: - - Radius auswählen: - - - - - Pick start angle: - - Startwinkel auswählen: - - - - - Pick aperture: - - Wählen Sie Aperture: - - - - Aperture angle: - Aperture angle: + Aperture angle: - + + Polygon + Polygon + + + + Create Polygon + Polygon erstellen + + + + Ellipse + Ellipse + + + + Create Ellipse + Ellipse erstellen + + + + Text + Text + + + Pick location point: - Einbaupunkt auswählen: + Einbaupunkt auswählen: - - Select an object to move - - Ein Objekt zum Bewegen auswählen - + + Create Text + Text erstellen - - Pick start point: - - Startpunkt auswählen: - + + Dimension + Abmessung - Pick end point: + Create Dimension + Abmessung erstellen + + + + Edges don't intersect! - Endpunkt auswählen: + Kanten überschneiden nicht! - - Select an object to rotate - - Objekt zum Drehen auswählen - + + ShapeString + Textform - - Pick rotation center: + + Pick ShapeString location point: - Rotationsmittelpunkt auswählen: - - - - - Pick base angle: - - Basiswinkel wählen: - - - - - Pick rotation angle: - - Drehwinkel auswählen: - - - - - Select an object to offset - - Objekt zum Versetzen markieren + Position für Textform wählen: - Offset only works on one object at a time + Create ShapeString + Textform erstellen + + + + Move + Verschieben + + + + Select an object to move - Versetzen funktioniert nur auf ein Objekt zu einem Zeitpunkt + Ein Objekt zum Bewegen auswählen - - Pick distance: + + Pick start point: - Entfernen auswählen: + Startpunkt auswählen: - - Select an object to upgrade + + Copy + Kopieren + + + + Pick end point: - Wählen Sie ein Objekt zum Hochstufen + Endpunkt auswählen: - - Select an object to trim/extend + + Change Style + Stil Ändern + + + + Select an object to rotate - Wählen Sie ein Objekt zum Beschneiden / Erweitern + Objekt zum Drehen auswählen - - Select an object to scale + + Pick rotation center: - Ein Objekt zum Skalieren auswählen - - - - - Pick base point: - - Basispunkt auswählen: - - - - - Pick scale factor: - - Skalierungsfaktor auswählen: - - - - - Number of sides - Anzahl der Seiten - - - - &Relative - &Relativ - - - - &Undo - &Rückgängig - - - - &Close - S&chließen - - - - &Copy - &Kopieren - - - - If checked, command will not finish until you press the command button again - Falls aktiviert, wird Befehl nicht beendet bis Sie den Befehlsknopf nochmals drüchen - - - - &Continue - &Continue - - - - Last point has been removed - - Letzter Punkt wurde entfernt - - - - - Spline has been closed - - Spline wurde geschlossen - - - - - Edges don't intersect! - - Kanten überschneiden nicht! - - - - - Cannot offset this object type - - Dieser Objekttyp kann nicht versetzt werden - - - - - Found groups: closing each open object inside - - Gruppen gefunden: jedes Objekt innerhalb wird geschlossen - - - - - Found 2 objects: fusing them - - 2 Objekte gefunden: werden vereinigt - - - - - Found 1 non-parametric objects: draftifying it - - 1 nicht-parametrisches Objekt gefunden: erstelle Entwurfsobjekt daraus + Rotationsmittelpunkt auswählen: - Found 1 closed sketch object: making a face from it + Rotate + Drehen + + + + Pick base angle: - 1 geschlossenes Skizzen-Objekt gefunden: erstelle eine Fläche daraus + Basiswinkel wählen: - - Found 1 open wire: closing it + + Pick rotation angle: - 1 offenen Linienzug gefunden: schließen + Drehwinkel auswählen: - - Found several edges: wiring them + + Select an object to offset - Mehrere Kanten gefunden: erstelle eine Linienzug daraus + Objekt zum Versetzen markieren - - Found several non-connected edges: making compound + + Offset only works on one object at a time - Mehrere nicht-verbundene Kanten gefunden: erstelle ein Verbund-Objekt + Versetzen funktioniert nur auf ein Objekt zu einem Zeitpunkt - - Found several non-treatable objects: making compound + + Cannot offset this object type - Mehrere nicht behandelebare Objekte gefunden: erstelle Verbund-Objekt + Dieser Objekttyp kann nicht versetzt werden - - Found 1 parametric object: breaking its dependencies + + Pick distance: - 1 parametrisches Objekt gefunden: löse Abhängigkeiten auf + Entfernen auswählen: - - Found 2 objects: subtracting them + + Select an object to upgrade - 2 Objekte gefunden: subtrahieren + Wählen Sie ein Objekt zum Hochstufen - - Found several faces: splitting them - - Mehrere Flächen gefunden: aufbrechen - + + Upgrade + Hochstufen - - Found several objects: subtracting them from the first one - - Mehrere Objekte gefunden: diese vom ersten Objekt subtrahieren - + + Downgrade + Herabstufen - - Found 1 face: extracting its wires - - 1 Fläche gefunden: seine Linienzüge extrahieren - + + Scale + Skalieren - - Found only wires: extracting their edges + + Select an object to scale - Nur Linienzüge gefunden: extrahieren ihre Kanten - + Ein Objekt zum Skalieren auswählen + + Pick base point: + + Basispunkt auswählen: + + + + + Pick scale factor: + + Skalierungsfaktor auswählen: + + + + + Select an object to project + + Wähle ein zu projizierendes Objekt aus + + + + + Select a Draft object to edit + + Wähle ein Entwurf Objekt zur Bearbeitung aus + + + + This object type is not editable - Dieser Objekttyp kann nicht bearbeitet werden + Dieser Objekttyp kann nicht bearbeitet werden - + Active object must have more than two points/nodes - Aktives Objekt muss mehr als zwei Punkte / Knoten haben + Aktives Objekt muss mehr als zwei Punkte / Knoten haben - - Finishes the current drawing or editing operation (F) - Momentanen Zeichnungs- oder Editier-Operation (F) beenden - - - - Add points to the current object - Punkte zu momentanem Objekt hinzufügen - - - - Remove points from the current object - Punkte von momentanem Objekt entfernen - - - - F&illed - Gefüllt - - - - Check this if the object should appear as filled, otherwise it will appear as wireframe (i) - Hier anwählen falls das Objekt gefüllte erscheinen soll, sonst erscheint es als Drahtgitter (i) - - - - &Finish - &Fertig - - - - If checked, an OCC-style offset will be performed instead of the classic offset - Wenn gesetzt, wird ein OCC-Stil Offset anstatt eines klassischen Offsets angewendet - - - - &OCC-style offset - OCC-Stil Offset - - - - &Wipe - &Radieren - - - - Wipes the existing segments of this line and starts again from the last point (W) - Löscht vorhandene Segmente dieser Linie und beginnt nochmals vom letzten Punkt (W) - - - - Point - Punkt - - - - Distance - Abstand - - - - Edit - Bearbeiten - - - - Create BSpline - BSpline erstellen - - - - Create Rectangle - Rechteck erstellen - - - - Create Circle - Kreis erstellen - - - - Create Arc - Bogen erstellen - - - - Create Polygon - Polygon erstellen - - - - Create Text - Text erstellen - - - - Create Dimension - Dimension erstellen - - - - Copy - Kopieren - - - - Move - Verschieben - - - - Change Style - Stil Ändern - - - - Rotate - Drehen - - - - Found 1 solidificable object: solidifying it + + Selection is not a Knot - 1 Objekt mit Möglichkeit zum verfestigen gefunden. Wird verfestigt + Auswahl ist kein Knoten + - - Found several objects or faces: making a parametric face + + Endpoint of BezCurve can't be smoothed - Mehrere Objekte oder Oberflächen gefunden: Mache parametrische Oberfläche + Endpunkte einer Bézierkurve können nicht geglättet werden + - - Found objects containing curves: fusing them + + Select an object to convert - Fand Objekte mit enthaltenen Kurven: Werde sie verschmelzen + Ein Objekt zum Konvertieren auswählen + - - Found several objects: fusing them + + Select an object to array - Fand mehrere Objekte: Verschmelze sie + Wählen Sie ein Objekt für das Datenfeld + - - Scale - Skalieren + + Please select base and path objects + + Bitte wählen Sie Basis- und Pfadobjekte + + + + + Create Point + Punkt erstellen + + + + Select an object to clone + + Wählen Sie ein Objekt zum Klonen aus + + + + + Select face(s) on existing object(s) + + Wählen sie ein oder mehrere Flächen auf existierenden Objekten aus + + + + + Teigha File Converter not found, DWG support is disabled. + + Teigha-Dateikonverter wurde nicht gefunden, DWG-Unterstützung ist deaktiviert. + + + + + &Draft + &Entwurf + + + + Utilities + Dienstprogramme + + + + Wire tools + Drahtwerkzeuge + + + + Snapping + Objektfang + + + + Found 1 multi-solids compound: exploding it + + Ein Verbund mehrerer Solids gefunden: wird zerlegt + + + + + Sides + Seiten + + + + BSplines and Bezier curves are not supported by this tool + BSplines und Bezier-Kurven werden von diesem Tool nicht unterstützt + + + + The given object is not planar and cannot be converted into a sketch. + Das angegebene Objekt ist nicht planar und kann nicht in eine Skizze umgewandelt werden. + + + + Found several objects: creating a shell + + Mehrere Objekte gefunden: Erstellung einer Shell + + + + + Found several coplanar objects or faces: creating one face + + Mehrere koplanare Objekte oder Flächen gefunden: Erstelle Fläche + + + + + Found 1 linear object: converting to line + + 1 lineares Objekt gefunden: Konvertiere zu einer Linie + + + + + Found 1 closed sketch object: creating a face from it + + 1 geschlossenes Skizzen-Objekt gefunden: Erstelle daraus eine Fläche + + + + + Found closed wires: creating faces + + Geschlossene Drahtlinien gefunden: Erstelle Fläche + + + + + Found several non-treatable objects: creating compound + + Mehrere nicht behandelbare Objekte gefunden: Erstellen eines Verbundes + + + + + Length + Länge + + + + Angle + Winkel + + + + Length of current segment + Länge des aktuellen Abschnitts + + + + Angle of current segment + Winkel des aktuellen Abschnittes + + + + Check this to lock the current angle (l) + Aktivieren, um den aktuellen Winkel zu sperren (l) + + + + Con&tinue + For&tfahren + + + + &Select edge + &Kante auswählen - Trim - Trim + Selects an existing edge to be measured by this dimension (E) + Wählt eine vorhandene Kante aus, die durch diese Bemaßung beschrieben werden soll (E) - - Start Angle - Startwinkel + + Auto + Automatisch - - Aperture - Öffnungswinkel - - - - Installed Macros - Installierte Makros - - - - Wire tools - Drahtwerkzeuge - - - - DWire - DWire - - - - Create DWire - Entwurfsdraht (DWire) erstellen - - - - DWire has been closed + + Sorry, offset of Bezier curves is currently still not supported - DWire wurde geschlossen + Tut mir leid, der Versatz von Bezier-Kurven wird derzeit noch nicht unterstützt + - - BSpline - BSpline + + Convert to Sketch + In eine Skizze umwandeln - - Rectangle - Rechteck + + Convert to Draft + In einen Entwurf umwandeln - - Polygon - Polygon + + Convert + Umwandeln - - Text - Text + + Array + Anordnung - - Dimension - Abmessung - - - - No upgrade available for this object + + Select object(s) to trim/extend - Kein Upgrade für dieses Objekt verfügbar + Wählen Sie Objekt(e) zum beschneiden/verlängern + - - Couldn't upgrade these objects + + Unable to trim these objects, only Draft wires and arcs are supported - Diese Objekte konnten nicht aktualisiert werden + Nicht möglich, diese Objekte zu trimmen, es werden nur Draht-Objekte und Bögen unterstützt + - - One wire is not planar, upgrade not done + + Unable to trim these objects, too many wires - Ein Draht ist nicht planar, Upgrade nicht ausgeführt + Nicht möglich, diese Objekte zu trimmen, zu viele Draht-Objekte + - - Found a closed wire: making a face + + These objects don't intersect - Geschlossener Draht gefunden: Erzeuge Fläche + Diese Objekte überschneiden sich nicht + - - Found 1 open edge: making a line + + Too many intersection points - Eine offene Kante gefunden: Erzeuge Linie + Zu viele Schnittpunkte + - - Found 1 circular edge: making a circle - - Eine kreisförmige Kante gefunden: Erzeuge Kreis - - - - No more downgrade possible - - Kein weiteres Downgrade möglich - - - - Draft creation tools - Werkzeuge zur Erstellung von Entwürfen - - - - Draft modification tools - Werkzeuge zur Bearbeitung von Entwürfen - - - - &Draft - &Entwurf - - - - Context tools - Kontextwerkzeuge + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + Die DXF Import/Export Bibliotheken, die FreeCAD für den Umgang mit dem DXF Format +benötigt, wurden auf diesem System nicht gefunden. +Bitte erlauben Sie FreeCAD, diese automatisch herunterzuladen: + 1 - Laden Sie den Arbeitsbereich Entwurf + 2 - Im Menü Bearbeiten > Einstellungen > Import-Export > DXF > Download erlauben +Oder laden Sie diese Bibliotheken selbst herunter, wie hier erklärt +https://github.com/yorikvanhavre/Draft-dxf-importer diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.qm b/src/Mod/Draft/Resources/translations/Draft_es-ES.qm index b525c5082b..9cc975e80e 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_es-ES.qm and b/src/Mod/Draft/Resources/translations/Draft_es-ES.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts index 4f6e0243a5..95c0e8a0db 100644 --- a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts +++ b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts @@ -1,15 +1,26 @@ + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + La descarga de las librerías dxf falló. Por favor descargalas manualmente de https://github.com/yorikvanhavre/Draft-dxf-importer y colócalas en la carpeta de macros. + + Draft_AddPoint - + Add Point Añadir punto - + Adds a point to an existing wire/bspline Agrega un punto a un alambre/bspline existente @@ -17,12 +28,12 @@ Draft_AddToGroup - + Add to group... Agregar a grupo... - + Adds the selected object(s) to an existing group Agrega el(los) objeto(s) seleccionado(s) a un grupo existente @@ -30,12 +41,12 @@ Draft_ApplyStyle - + Apply Current Style Aplicar Estilo Actual - + Applies current line width and color to selected objects Aplica el ancho de línea y color actuales a los objetos seleccionados @@ -43,12 +54,12 @@ Draft_Arc - + Arc Arco - + Creates an arc. CTRL to snap, SHIFT to constrain Crea un arco. CTRL para forzar, SHIFT para restringir @@ -56,12 +67,12 @@ Draft_Array - + Array Matriz - + Creates a polar or rectangular array from a selected object Crea una matriz rectangular o polar de un objeto seleccionado @@ -69,12 +80,12 @@ Draft_BSpline - + B-Spline B-Spline - + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain Crea una B-spline de puntos múltiples. CTRL para ajustar, SHIFT para restringir @@ -95,12 +106,12 @@ Draft_Circle - + Circle Circunferencia - + Creates a circle. CTRL to snap, ALT to select tangent objects Crea una circunferencia. CTRL para forzar, ALT para seleccionar objetos tangentes @@ -108,12 +119,12 @@ Draft_Clone - + Clone Clonar - + Clones the selected object(s) Copia los objetos seleccionados @@ -121,12 +132,12 @@ Draft_CloseLine - + Close Line Cerrar línea - + Closes the line being drawn Cierra la línea que se está dibujando @@ -134,12 +145,12 @@ Draft_DelPoint - + Remove Point Eliminar punto - + Removes a point from an existing wire or bspline Quita un punto de un alambre o bspline existente @@ -147,12 +158,12 @@ Draft_Dimension - + Dimension Cota - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Crea una cota. CTRL para forzar, SHIFT para restringir, ALT para seleccionar un segmento @@ -160,12 +171,12 @@ Draft_Downgrade - + Downgrade Reducir - + Explodes the selected objects into simpler objects, or subtract faces descompone los objetos seleccionados en objetos simples, o resta caras @@ -173,7 +184,7 @@ Draft_Draft2Sketch - + Draft to Sketch Borrador a esquema @@ -181,12 +192,12 @@ Draft_Drawing - + Drawing Dibujo - + Puts the selected objects on a Drawing sheet. Poner los objetos seleccionados en una hoja de Dibujo. @@ -194,12 +205,12 @@ Draft_Edit - + Edit Editar - + Edits the active object Edita el objeto activo @@ -207,12 +218,12 @@ Draft_Ellipse - + Ellipse Elipse - + Creates an ellipse. CTRL to snap Crea una elipse. CTRL para ajustar @@ -220,12 +231,12 @@ Draft_Facebinder - + Facebinder - Facebinder + unir caras - + Creates a facebinder object from selected face(s) Crear un objecto facebinder a partir de cara(s) seleccionada(s) @@ -233,12 +244,12 @@ Draft_FinishLine - + Finish line Terminar línea - + Finishes a line without closing it Termina una línea sin cerrarla @@ -246,12 +257,12 @@ Draft_FlipDimension - + Flip Dimension Invertir Cota - + Flip the normal direction of a dimension Girar la dirección normal de una cota @@ -259,38 +270,25 @@ Draft_Heal - + Heal Reparar - - Heal faultly Draft objects saved from an earlier FreeCAD version - Reparar objetos defectuosos del boceto guardados desde una versión anterior de FreeCAD - - - - Draft_Layer - - - Layer - Capa - - - - Adds a layer - Añade una capa + + Heal faulty Draft objects saved from an earlier FreeCAD version + Reparar objetos del boceto defectuosos guardados con una versión de FreeCAD anterior Draft_Line - + Line Línea - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Crea una línea de 2 puntos. CTRL para forzar, SHIFT para restringir @@ -298,12 +296,12 @@ Draft_Move - + Move Mover - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy Mueve los objetos seleccionados entre 2 puntos. CTRL para forzar, SHIFT para restringir, ALT para copiar @@ -311,12 +309,12 @@ Draft_Offset - + Offset Equidistancia - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Crea una equidistancia al objeto activo. CTRL para forzar, SHIFT para restringir, ALT para copiar @@ -324,12 +322,12 @@ Draft_PathArray - + PathArray matriz de copia - + Creates copies of a selected object along a selected path. Crea copias de un objeto seleccionado siguiendo una ruta seleccionada. @@ -337,12 +335,12 @@ Draft_Point - + Point Punto - + Creates a point object Crea un objeto punto @@ -350,12 +348,12 @@ Draft_Polygon - + Polygon Polígono - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Crea un polígono regular. CTRL para forzar, SHIFT para restringir @@ -363,12 +361,12 @@ Draft_Rectangle - + Rectangle Rectángulo - + Creates a 2-point rectangle. CTRL to snap Crea un rectángulo dado por 2 puntos. CTRL para forzar @@ -376,12 +374,12 @@ Draft_Rotate - + Rotate Girar - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Gira los objetos seleccionados. CTRL para forzar, SHIFT para restringir, ALT para crear una copia @@ -389,12 +387,12 @@ Draft_Scale - + Scale Escalar - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Escala los objetos seleccionados desde un punto base. CTRL para forzar, SHIFT para restringir, ALT para copiar @@ -402,12 +400,12 @@ Draft_SelectGroup - + Select group Seleccionar grupo - + Selects all objects with the same parents as this group Selecciona todos los objetos con los mismos padres de este grupo @@ -415,12 +413,12 @@ Draft_SelectPlane - + SelectPlane Seleccionar plano - + Select a working plane for geometry creation Selecciona un plano de trabajo para crear geometría @@ -428,17 +426,17 @@ Draft_Shape2DView - + Shape 2D view Vista de forma 2D - + Creates Shape 2D views of selected objects Crea vistas de formas 2D de los objetos seleccionados - + Convert bidirectionally between Draft and Sketch objects Convertir bidireccionalmente entre objetos borrador y esquema @@ -446,12 +444,12 @@ Draft_ShapeString - + Shape from text... Forma a partir de texto... - + Creates text string in shapes. crear una cadena de texto en las formas. @@ -459,12 +457,12 @@ Draft_ShowSnapBar - + Show Snap Bar Mostrar barra de Ajuste - + Shows Draft snap toolbar Mostrar barra de herramientas Ajuste del Borrador @@ -472,12 +470,12 @@ Draft_Snap_Angle - + Angles Angulos - + Snaps to 45 and 90 degrees points on arcs and circles magnetiza a 45 o 90 grados los puntos en arcos y circulos @@ -485,12 +483,12 @@ Draft_Snap_Center - + Center Centro - + Snaps to center of circles and arcs Se ajusta al centro de circunferencias y arcos @@ -498,25 +496,25 @@ Draft_Snap_Dimensions - + Dimensions Dimensiones - + Shows temporary dimensions when snapping to Arch objects - Shows temporary dimensions when snapping to Arch objects + Muestra las dimensiones temporales cuando ajusta a objetos arcos Draft_Snap_Endpoint - + Endpoint Punto final - + Snaps to endpoints of edges Se ajusta a los extremos de los bordes @@ -524,12 +522,12 @@ Draft_Snap_Extension - + Extension Extensión - + Snaps to extension of edges Se ajusta a la extensión de los bordes @@ -537,12 +535,12 @@ Draft_Snap_Grid - + Grid Rejilla - + Snaps to grid points Se ajusta a los puntos de la rejilla @@ -550,12 +548,12 @@ Draft_Snap_Intersection - + Intersection Intersección - + Snaps to edges intersections Se ajusta a las intersecciones de los bordes @@ -563,12 +561,12 @@ Draft_Snap_Lock - + Toggle On/Off encendido/apagado - + Activates/deactivates all snap tools at once Activa/desactiva todas las herramientas de ajuste a la vez @@ -576,12 +574,12 @@ Draft_Snap_Midpoint - + Midpoint Punto medio - + Snaps to midpoints of edges Se ajusta a los puntos medios de los bordes @@ -589,12 +587,12 @@ Draft_Snap_Near - + Nearest Mas cercano - + Snaps to nearest point on edges Se ajusta al punto más cercano en los bordes @@ -602,12 +600,12 @@ Draft_Snap_Ortho - + Ortho Ortho - + Snaps to orthogonal and 45 degrees directions Se ajusta a direcciones ortogonales y a 45 grados @@ -615,38 +613,38 @@ Draft_Snap_Parallel - + Parallel Paralelo - + Snaps to parallel directions of edges - Snaps to parallel directions of edges + Se anexa a direcciones paralelas de los bordes Draft_Snap_Perpendicular - + Perpendicular Perpendicular - + Snaps to perpendicular points on edges - Snaps to perpendicular points on edges + Se anexa a puntos perpendiculares en los bordes Draft_Snap_WorkingPlane - + Working Plane Plano de Trabajo - + Restricts the snapped point to the current working plane Restringe el punto de ajuste al plano de trabajo actual @@ -654,12 +652,12 @@ Draft_Text - + Text Texto - + Creates an annotation. CTRL to snap Crea una anotación. CTRL para forzar @@ -667,12 +665,12 @@ Draft_ToggleConstructionMode - + Toggle construcion Mode Conmutar modo de construcción - + Toggles the Construction Mode for next objects. Conmuta el modo de construcción para los próximos objetos. @@ -680,12 +678,12 @@ Draft_ToggleContinueMode - + Toggle Continue Mode Cambiar modo continuo - + Toggles the Continue Mode for next commands. Activa o desactiva el modo de continuar para los comandos siguientes. @@ -693,12 +691,12 @@ Draft_ToggleDisplayMode - + Toggle display mode Alternar modo de exhibición - + Swaps display mode of selected objects between wireframe and flatlines Intercambia el modo de exhibir los objectos selecionados entre modelo de alambre and líneas planas @@ -706,25 +704,25 @@ Draft_ToggleGrid - + Toggle Grid Activar/Desactivar rejilla - - Toggles the Draft gid on/off + + Toggles the Draft grid on/off Activa/Desactiva la rejilla Draft_Trimex - + Trimex Recortar o extender - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Recorta o extiende el objeto seleccionado, solo se puede aplicar a caras. CTRL ajustes, SHIFT restringe el segmento actual o normal, ALT invierte @@ -732,12 +730,12 @@ Draft_UndoLine - + Undo last segment Deshacer el último segmento - + Undoes the last drawn segment of the line being drawn Deshace el último segmento de la línea que se está dibujando @@ -745,25 +743,38 @@ Draft_Upgrade - + Upgrade Aumentar - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces Junta los objetos seleccionados en uno, o convierte los contornos cerrados en caras, o une caras + + Draft_VisGroup + + + VisGroup + VisGroup + + + + Adds a VisGroup + Agrega un VisGroup + + Draft_Wire - + DWire DWire - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain Crea un DraftWire (DWire) de puntos múltiples. CTRL para ajuste, Mayús para restricción @@ -771,12 +782,12 @@ Draft_WireToBSpline - + Wire to BSpline Alambre a BSpline - + Converts between Wire and BSpline Conversión entre alambre y BSpline @@ -804,17 +815,17 @@ el color predeterminado para símbolos de ajuste rápido - + This is the default color for objects being drawn while in construction mode. Este es el color predeterminado para objetos que están siendo dibujados en el modo de construcción. - + This is the default group name for construction geometry Este es el nombre del grupo predeterminado para la geometría de la construcción - + Construction Construcción @@ -917,17 +928,17 @@ such as "Arial:Bold" Color y anchura de línea originales - + if this is checked, paper space objects will be imported too si esta marcada, los objetos del espacio papel se importarán también - + if this is unchecked, texts/mtexts won't be imported Si esto no está seleccionado, texts/mtexts no serán importados - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. Al exportar tiras a DXF, las tiras serán transformadas en polilíneas. Este valor es la longitud máxima de cada uno de los segmentos de la polilínea. Si es 0, entonces toda la tira se tratará como un segmento recto. @@ -952,7 +963,7 @@ such as "Arial:Bold" Opciones generales - + Construction group name Nombre de grupo de construcción @@ -968,22 +979,22 @@ Values with differences below this value will be treated as same. Este es el valor utilizado por funciones que utilizan una tolerancia. Valores con diferencias por debajo de este valor se tratarán de la misma manera. - + DXF format options Opciones de formato DXF - + Check this if you want the non-named blocks (beginning with a *) to be imported too Marque esta opción si desea que los bloques sin nombre (que comienzan con un *) sean importados también - + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... Si está seleccionada, FreeCAD intentará unir objetos coincidentes en alambres. Espere, esto puede tomar un tiempo... - + Join geometry Unir geometría @@ -1083,32 +1094,32 @@ Values with differences below this value will be treated as same. Seleccione los objetos base después de copiar - + If checked, a grid will appear when drawing Si está activada, aparecerá una rejilla al dibujar - + Use grid Usar la rejilla - + Grid spacing Espaciado de la cuadrícula - + The spacing between each grid line El espaciado entre líneas de cuadrícula - + Main lines every Líneas principales cada - + Mainlines will be drawn thicker. Specify here how many squares between mainlines. Las líneas principales se dibujarán más gruesas. Especifique aquí cuántos cuadros dejar entre líneas principales. @@ -1138,22 +1149,22 @@ Values with differences below this value will be treated as same. Derecha - + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable Si está marcado, los objetos de la misma capa se unirán en Draft Blocks, volviendo la visualización más rápida, pero haciéndolos menos editables - + Group layers into blocks Agrupar capas en bloques - + If this is checked, all objects containing faces will be exported as 3d polyfaces Si marcado, todos los objetos que contienen caras serán exportados como superficies poligonales 3D - + Export 3D objects as polyface meshes Exporta objetos 3D como mallas poligonales @@ -1193,37 +1204,37 @@ Values with differences below this value will be treated as same. Mostrar plano de trabajo rastreador - + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command Si está seleccionada, la rejilla del Borrador siempre será visible cuando el escenario Borrador esté activo. De lo contrario sólo cuando se utilizará un comando - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document Si se selecciona, los textos importados obtendrán el tamaño de texto del borrador estándar, en lugar del tamaño que tienen en el documento DXF - + Use standard font size for texts Utilizar el tamaño de fuente estándar para textos - + If this is checked, hatches will be converted into simple wires Si se selecciona, los sombreados se convertirán en alambres simples - + Import hatch boundaries as wires Importar sombreados frontera como alambres - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width Si se selecciona, cuando las polilíneas tengan un ancho definido, se representará como alambres cerrados con la anchura correcta - + Render polylines with width Visualizar polilíneas con anchura @@ -1255,12 +1266,12 @@ Values with differences below this value will be treated as same. When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. - When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. + De estar marcada, las herramientas de dibujo crearán primitivas tipo parte en lugar de objetos de dibujo, cuando sea posible. Use Part Primitives when available - Use Part Primitives when available + Utiliza Primitivos del módulo Pieza cuando estén disponibles @@ -1270,87 +1281,87 @@ Values with differences below this value will be treated as same. If this is checked, snapping is activated without the need to press the snap mod key - If this is checked, snapping is activated without the need to press the snap mod key + Si está marcado, se activa el ajuste sin necesidad de pulsar la tecla snap mod Always snap (disable snap mod) - Always snap (disable snap mod) + Siempre ajustar (desactivar modo de ajuste) - + Construction geometry Geometría de construcción - + Construction geometry color - Construction geometry color + Color de los elementos auxiliares - + Import Importar - + texts and dimensions textos y cotas - + points puntos - + layouts - layouts + disposición - + *blocks *bloques - + If this is checked, the exported objects will be projected to reflect the current view direction - If this is checked, the exported objects will be projected to reflect the current view direction + Si esto se selecciona, los objetos exportados serán proyectados para reflejar la dirección de vista actual - + Project exported objects along current view direction - Project exported objects along current view direction + Objetos exportados del proyecto a lo largo de la actual direccion de la vista - + Ellipse export is badly supported. Use this to export them as polylines instead. - Ellipse export is badly supported. Use this to export them as polylines instead. + Exportar elipses directamente puede generar errores. Usa esta opción para exportarlas como polilínea. - + DWG format options Opciones de formato DWG - + Path to Teigha File Converter - Path to Teigha File Converter + Ruta al conversor de archivos Teigha - + The path to your Teigha File Converter executable - The path to your Teigha File Converter executable + La ruta a conversor de ficheros Teigha Visual settings - Visual settings + Configuración visual Visual Settings - Visual Settings + Configuración visual @@ -1365,17 +1376,17 @@ Values with differences below this value will be treated as same. Snap symbols style - Snap symbols style + Estilo de simbolos de ajuste Draft classic style - Draft classic style + Estilo de dibujado clasico Bitsnpieces style - Bitsnpieces style + Estilo Bitsnpieces @@ -1385,7 +1396,7 @@ Values with differences below this value will be treated as same. Hatch patterns resolution - Hatch patterns resolution + Resolución de patrones de sombreado @@ -1393,14 +1404,14 @@ Values with differences below this value will be treated as same. Rejilla - + Always show the grid - Always show the grid + Mostrar siempre la cuadrícula Texts and dimensions - Texts and dimensions + textos y cotas @@ -1423,52 +1434,37 @@ Values with differences below this value will be treated as same. tamaño - + Dimensions arrows flechas de cotas - + style estilo - + Dot - Dot + Punto - + Circle Circunferencia - + Arrow Flecha - + The default size of arrows El tamaño predeterminado de las flechas - - Dimensions lines - Lineas de cotas - - - - text above - texto encima - - - - text inside - text inside - - - + The default size of dimensions extension lines El tamaño predeterminado de las líneas de extensión de cotas @@ -1495,7 +1491,7 @@ Values with differences below this value will be treated as same. Default ShapeString Font File - Default ShapeString Font File + Archivo ShapeString Font predeterminado @@ -1505,113 +1501,213 @@ Values with differences below this value will be treated as same. Fill objects with faces whenever possible - Fill objects with faces whenever possible + Rellenar objetos con caras siempre que sea posible - - DXF / DWG options - DXF / DWG options - - - + Create Crear - - If thi sis checked, only standard Part objects will be created (fastest) - If thi sis checked, only standard Part objects will be created (fastest) - - - + simple Part shapes - simple Part shapes + formas de pieza simples - + If this is checked, parametric Draft objects will be created whenever possible - If this is checked, parametric Draft objects will be created whenever possible + Si esto se activa, objetos paramétricos Draft serán creados cuando sea posible - + Draft objects - Draft objects + Objetos Draft - + If this is checked, sketches will be created whenever possible - If this is checked, sketches will be created whenever possible + Si está seleccionada, los bocetos se crearán cuando sea posible - + Sketches - Sketches + Bocetos - + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. - If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. + Si está seleccionada, se recuperarán los colores de los objetos DXF cuando sea posible. Si no, se aplicarán los colores predeterminados. - + Get original colors from the DXF file - Get original colors from the DXF file + Tomar colores originales del archivo DXF - - If this is checked, DXF layers will be imported as Draft layers - If this is checked, DXF layers will be imported as Draft layers - - - - Use Draft Layers - Use Draft Layers - - - + Treat ellipses and splines as polylines - Treat ellipses and splines as polylines + Tratamiento de elipses y splines como polilíneas - + Max Spline Segment: - Max Spline Segment: - - - - SVG / OCA options - SVG / OCA options + Segmento de Max Spline: Export style - Export style + Estilo de exportación Snapping settings - Snapping settings + Configuración de ajuste Show the unit suffix in dimensions - Show the unit suffix in dimensions + Mostrar la unidad en las cotas + + + + DXF / DWG + DXF / DWG + + + + Automatic update + Actualización automática + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + <html><head/><body><p>Marcando esta casilla permitirás que FreeCAD descargue y actualize los</p><p>componentes necesarios para importar y exportar archivos DXF. También puedes hacer esto</p><p>manualmente visitando https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + + + + Allow FreeCAD to automatically download and update the DXF libraries + Permitir que FreeCAD descargue y actualize automáticamente las librerías DXF + + + + If this is checked, only standard Part objects will be created (fastest) + Si se habilita esto, solo se crearán piezas estándar (más rapido) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + Si esto se selecciona, se importarán las capas DXF como Draft VisGroups + + + + Use VisGroups + Usar VisGroups + + + + mm + mm + + + + SVG / OCA + SVG / OCA + + + + Grid size + Tamaño de cuadrícula + + + + the number of horizontal or vertical lines of the grid + el número de lineas horizontales o verticales de la cuadrícula + + + + lines + Líneas + + + + Dimensions + Dimensiones + + + + display mode + Modo de visualización + + + + text above (2D) + texto por encima (2D) + + + + text inside (3D) + texto adentro (3D) + + + + extension lines size + tamaño de las líneas de extensión + + + + Drawing views + Vistas de dibujo + + + + Dashed line definition + Definición de línea discontinua + + + + A SVG linestyle definition + Una definición de estilo de línea SVG + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + Definición de línea de punto y trazo + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Definición de línea punteada + + + + 0.02,0.02 + 0.02,0.02 Workbench - + Draft Snap - Draft Snap + Ajuste del borrador - + Draft creation tools Herramientas de creación de bosquejo - + Draft modification tools Herramientas de modificación de bosquejo @@ -1619,640 +1715,600 @@ Values with differences below this value will be treated as same. draft - + Draft Command Bar - Draft Command Bar + Barra de comandos del borrador - + active command: Comando activo: - + None Ninguno - + Active Draft command Activar comando de boceto - + X coordinate of next point Coordenada X del siguiente punto - + X X - + Y Y - + Z Z - + Y coordinate of next point Coordenada Y del siguiente punto - + Z coordinate of next point Coordenada Z del siguiente punto - + Radius Radio - + Radius of Circle radio de la circunferencia - + &Relative &Relativo - + Coordinates relative to last point or absolute (SPACE) Coordenadas relativas al último punto o absolutas (ESPACIO) - + F&illed Llenado - + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) Marca esto si el objeto debe aparecer lleno, de otra manera aparecerá como líneas (i) - + &Finish Terminar - + Finishes the current drawing or editing operation (F) Finaliza la operación actual de edición o dibujo (F) - + If checked, command will not finish until you press the command button again Si está activado, el comando no terminará hasta que vuelva a pulsar el botón de comando - - &Continue - &Continuar - - - + If checked, an OCC-style offset will be performed instead of the classic offset Si marcado, una offset estilo OCC será realizada en vez del offset clásico - + &OCC-style offset Salida estilo OCC - + Add points to the current object Agregar puntos al objeto actual - + Remove points from the current object Eliminar puntos del objeto actual - + Make Bezier node sharp - Make Bezier node sharp + Hacer nodo Bezier filoso - + Make Bezier node tangent Hacer nodo Bézier tangente - + Make Bezier node symmetric Hacer nodo Bézier simétrico - + &Undo &Deshacer - + Undo the last segment (CTRL+Z) Deshace el último segmento (CTRL+Z) - + &Close &Cerrar - + Finishes and closes the current line (C) Termina y cierra la línea actual (C) - + &Wipe Borrar - + Wipes the existing segments of this line and starts again from the last point (W) Borra los segmentos existentes de esta línea y comienza de nuevo desde el último punto (W) - + Number of sides Número de lados - + Offset Equidistancia - + XY XY - + Select XY plane Seleccionar plano XY - + XZ XZ - + Select XZ plane Seleccionar plano XZ - + YZ YZ - + Select YZ plane Seleccionar plano YZ - + View Vista - + Select plane perpendicular to the current view Seleccionar plano perpendicular a la vista actual - + Do not project points to a drawing plane No proyectar puntos al plano de dibujo - + &Copy &Copiar - + If checked, objects will be copied instead of moved (C) Si está activada, los objetos serán copiados en lugar de movidos (C) - + Text string to draw Cadena de texto para dibujar - + String Cadena de texto - + Height of text Altura de texto - + Height Altura - + Intercharacter spacing Espacio entre caracteres - + Tracking - Tracking + Seguimiento - + Full path to font file: Ruta de acceso completa al archivo de fuente: - + Open a FileChooser for font file Abrir un Selector de ficheros para el archivo de fuente - + Set/unset a working plane - Set/unset a working plane + Establecer plano de trabajo - + Line Color Color de línea - + Face Color Color de cara - + Line Width Grosor de línea - + Font Size Tamaño de fuente - + Apply to selected objects Aplicar a los objetos seleccionados - + Toggles Construction Mode Conmutar el modo de construcción - + Select Plane Seleccionar plano - + Line Línea - + DWire DWire - + Circle Circunferencia - + Center X Centro X - + Arc Arco - + Point Punto - + Distance Distancia - + Trim Recortar - + Pick Object Designar objeto - + Edit Editar - + Global X Global X - + Global Y - Global Y + Y global - + Global Z - Global Z + Z global - + Local X - Local X + X local - + Local Y - Local Y + Y local - + Local Z - Local Z + Z local - + Invalid Size value. Using 200.0. Valor no válido de tamaño. Usando 200.0. - + Invalid Tracking value. Using 0. - Invalid Tracking value. Using 0. + Valor de seguimiento no válido. Usando 0. - + Please enter a text string. Por favor, introduzca una cadena de texto. - + Select a Font file Seleccione un archivo de fuente - + Please enter a font file. Por favor, introduzca un fichero de fuente. - + Draft.makeBSpline: not enough points - Draft.makeBSpline: not enough points + Draft.makeBSpline: no hay suficientes puntos - + Draft.makeBSpline: Equal endpoints forced Closed - Draft.makeBSpline: Equal endpoints forced Closed + Draft.makeBSpline: Extremos iguales forzando el Cierre - + Draft.makeBSpline: Invalid pointslist - Draft.makeBSpline: Invalid pointslist + Draft.makeBSpline: Lista de puntos inválida - + Found groups: closing each open object inside Encontrados grupos: cerrar cada objeto abierto dentro del grupo - + Found mesh(es): turning into Part shapes - Found mesh(es): turning into Part shapes + Malla(s) encontrada(s): convirtiéndolas en formas de pieza - + Found 1 solidificable object: solidifying it Encontrado 1 objeto solidificable: solidificándolo - + Found 2 objects: fusing them Encontrados 2 objetos: Fusionense ambos - - Found several objects: making a shell - - Found several objects: making a shell - - - - - Found several coplanar objects or faces: making one face - - Found several coplanar objects or faces: making one face - - - - + Found 1 non-parametric objects: draftifying it Encontrados objetos no paramétricos 1: proyéctelos - - Found 1 closed sketch object: making a face from it - - Encontrado 1 objeto del tipo croquis cerrado: hacer una cara de el - - - - Found closed wires: making faces - - Found closed wires: making faces - - - - + Found 1 open wire: closing it Encontrado 1 cable abierto: cierrelo - + Found several open wires: joining them - Found several open wires: joining them - + Se encontraron varios alambres abiertos: uniéndolos - + Found several edges: wiring them Encontradas varias aristas: Conviertalas en alambres - - Found several non-treatable objects: making compound - - Encontrados varios objetos no tratables: Combinándolos - - - + Unable to upgrade these objects. - Unable to upgrade these objects. - + No se pueden actualizar estos objetos - + Found 1 block: exploding it - Found 1 block: exploding it + Se encontró un bloque: explotándolo - + Found 1 parametric object: breaking its dependencies Encontrado un objeto paramétrico: romper sus dependencias - + Found 2 objects: subtracting them Encontrados 2 objetos: Restarlos - + Found several faces: splitting them Encontradas varias caras: partirlas - + Found several objects: subtracting them from the first one Encontrados varios objetos: restarlos respecto al primero - + Found 1 face: extracting its wires Encontrada 1 cara: extrayendo sus alambres - + Found only wires: extracting their edges Encontradas sólo alambres: extrayendo sus aristas - + No more downgrade possible No es posible más degradación - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. + _BSpline.createGeometry: Cerrado con el mismo primer/último Punto. Geometría no actualizada. - + Pick a face to define the drawing plane Designar una cara para definir el plano de dibujo - + Pick first point: Designar el primer punto: - + Create Line Crear línea - + Create DWire Crear DWire - + DWire has been closed Se ha cerrado DWire - + Last point has been removed Se ha eliminado el último punto - + Pick next point: Designar el siguiente punto: - + Pick next point, or (F)inish or (C)lose: designar el siguiente punto, o (F) terminar o (C) cerrar: - + BSpline BSpline @@ -2263,7 +2319,7 @@ Values with differences below this value will be treated as same. Se ha cerrado la spline - + Create BSpline Crear BSpline @@ -2273,431 +2329,590 @@ Values with differences below this value will be treated as same. CurvaBezier - + Bezier curve has been closed La curva Bezier ha sido cerrada - + Create BezCurve Crear Curva Bezier - + Rectangle Rectángulo - + Create Plane Crear Plano - + Create Rectangle Crear Rectángulo - + Pick opposite point: Designar punto de enfrente: - + Pick center point: Designar punto central: - + Pick radius: Designar radio: - + Pick start angle: Designar ángulo de inicio: - + Pick aperture: Elija apertura: - + Create Circle Crear Círculo - + Create Arc Crear Arco - + Start Angle Ángulo inicial - + Aperture Apertura - + Aperture angle: Ángulo de apertura: - + Polygon Polígono - + Create Polygon Crear Polígono - + Ellipse Elipse - + Create Ellipse Crear elipse - + Text Texto - + Pick location point: Designar localización de punto: - + Create Text Crear texto - + Dimension Cota - + Create Dimension Crear dimensión - + Edges don't intersect! ¡Las aristas no se pueden intersecar! - + ShapeString - ShapeString + etiqueta - + Pick ShapeString location point: - Pick ShapeString location point: + Escoger localización de la etiqueta: - + Create ShapeString - Create ShapeString + Crear etiqueta + - + Move Mover - + Select an object to move Seleccionar un objeto para mover - + Pick start point: Designar punto de inicio: - + Copy Copiar - + Pick end point: Designar punto final: - + Change Style Cambiar estilo - + Select an object to rotate Seleccionar un objeto para girar - + Pick rotation center: Designar centro de rotación: - + Rotate Girar - + Pick base angle: Designar ángulo base: - + Pick rotation angle: Designar ángulo de rotación: - + Select an object to offset Seleccionar un objeto para equidistancia - + Offset only works on one object at a time Equidistancia solo funciona con un objeto de cada vez - + Cannot offset this object type No se puede compensar este tipo de objeto - + Pick distance: Designar distancia: - + Select an object to upgrade Selecciona un objeto para aumentar - + Upgrade Aumentar - + Downgrade Reducir - - Select an object to trim/extend - - Seleccionar un objeto para recortar / extender - - - - + Scale Escalar - + Select an object to scale Seleccionar un objeto para escalar - + Pick base point: Designar punto base: - + Pick scale factor: Designar factor de escala: - + Select an object to project - Select an object to project - + Seleccione un objeto para proyecto - + Select a Draft object to edit - Select a Draft object to edit - + Seleccione un objeto "Draft" para editar - + This object type is not editable Este tipo de objeto no es editable - + Active object must have more than two points/nodes El objeto activo debe tener más de dos puntos/nodos - + Selection is not a Knot - Selection is not a Knot - + La selección no es un nudo - + Endpoint of BezCurve can't be smoothed - Endpoint of BezCurve can't be smoothed + Extremo de BezCurve no puede ser suavizado - + Select an object to convert - Select an object to convert - + Seleccione un objeto para convertir - + Select an object to array - Select an object to array + Elegir un objeto para crear matriz - + Please select base and path objects - Please select base and path objects + Por favor, seleccione los objetos de base y de camino - + Create Point Crear Punto - + Select an object to clone Seleccione un objeto para clonar - + Select face(s) on existing object(s) - Select face(s) on existing object(s) + Seleccione cara(s) en objetos existente(s) Teigha File Converter not found, DWG support is disabled. - Teigha File Converter not found, DWG support is disabled. + Convertidor de archivos Teigha no encontrado, soporte DWG está deshabilitado. - - Installed Macros - Macros instaladas - - - + &Draft &Bosquejo - + Utilities Utilidades - + Wire tools Herramientas de alambre - + Snapping Ajuste - + Found 1 multi-solids compound: exploding it - Found 1 multi-solids compound: exploding it + Se encontró un compuesto de multi-sólidos: explotándolo - + Sides - Sides + Lados + + + + BSplines and Bezier curves are not supported by this tool + Curvas BSplines y Bezier no son soportadas por esta herramienta + + + + The given object is not planar and cannot be converted into a sketch. + El objeto no es plano y no se puede convertir en un croquis. + + + + Found several objects: creating a shell + + Se encontraron varios objetos: creando un cascarón + + + + + Found several coplanar objects or faces: creating one face + + Se encontraon varios objetos o caras coplanares: creando una cara + + + + + Found 1 linear object: converting to line + + Se encontró 1 objeto linear: convirtiendo a línea + + + + + Found 1 closed sketch object: creating a face from it + + Se encontró un objeto de croquis cerrado: creando una cara de él + + + + + Found closed wires: creating faces + + Se encontraron alambres cerrados: creando caras + + + + + Found several non-treatable objects: creating compound + + Se encontraron varios objetos no-tratables: creando compuesto + + + + + Length + Longitud + + + + Angle + Ángulo + + + + Length of current segment + Longitud del segmento actual + + + + Angle of current segment + Ángulo del segmento actual + + + + Check this to lock the current angle (l) + Activa esto para fijar el ángulo actual (l) + + + + Con&tinue + Con&tinuar + + + + &Select edge + &Seleccionar arista + + + + Selects an existing edge to be measured by this dimension (E) + Slecciona un borde existente para ser medido por esta dimensión (E) + + + + Auto + Auto + + + + Sorry, offset of Bezier curves is currently still not supported + + Lo sentimos, actualmente es offset de curvas Bezier no está soportado + + + + + Convert to Sketch + Convertir a Croquis + + + + Convert to Draft + Convertir a Boceto + + + + Convert + Convertir + + + + Array + Matriz + + + + Select object(s) to trim/extend + + Seleccione objeto(s) a recortar/extender + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + Incapaz de recortar estos objetos, sólo alambres y arcos Draft son compatibles + + + + + Unable to trim these objects, too many wires + + Incapaz de recortar estos objetos, demasiados alambres + + + + + These objects don't intersect + + Estos objetos no intersectan + + + + + Too many intersection points + + Demasiados puntos de intersección + + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + Las librerías de importar/exportar DXF necesitadas por FreeCAD para manejar el formato DXF no fueron encontradas en tu sistema. +Por favor habilite que FreeCAD descargue estas librerías: + 1 - Cargar el módulo Draft + 2 - Menú Editar > Preferencias > Importar-Exportar > DXF > Habilitar Descargas +O descargue estas librerías manualmente, como se explica en https://github.com/yorikvanhavre/Draft-dxf-importer diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.qm b/src/Mod/Draft/Resources/translations/Draft_fi.qm index a967a406bf..c3cafaa6df 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fi.qm and b/src/Mod/Draft/Resources/translations/Draft_fi.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.ts b/src/Mod/Draft/Resources/translations/Draft_fi.ts index 18504e25e3..4f13aa33d2 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fi.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fi.ts @@ -1,15 +1,26 @@ + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + Dxf -kirjastojen lataaminen epäonnistui. Lataa ne manuaalisesti osoitteesta: https://github.com/yorikvanhavre/Draft-dxf-importer ja laita ne makrot-kansioosi. + + Draft_AddPoint - + Add Point Lisää piste - + Adds a point to an existing wire/bspline Lisää pisteen olemassa olevaan lankaan/bézier-käyräviivaan @@ -17,66 +28,66 @@ Draft_AddToGroup - + Add to group... - Lisää ryhmä... + Lisää ryhmään... - + Adds the selected object(s) to an existing group - Lisää valittu objekti(t) aiemmin luotuun ryhmään + Lisää valittu kohde(kohteet) aiemmin luotuun ryhmään Draft_ApplyStyle - + Apply Current Style - Käytä Nykyistä tyyliä + Käytä nykyistä tyyliä - + Applies current line width and color to selected objects - Koskee nykyisen viivanleveyden ja värin valittuja objekteja + Käytä nykyistä viivanleveyttä ja väriä valittuihin kohteisiin Draft_Arc - + Arc Kaari - + Creates an arc. CTRL to snap, SHIFT to constrain - Luo kaaren. CTRL kohdistaa kohteisiin, SHIFT luo rajoitteita + Luo kaaren. CTRL poimintaan, SHIFT luo rajoitteita Draft_Array - + Array Taulukko - + Creates a polar or rectangular array from a selected object - Luo polaari- tai suorakaideruudukon valitusta objektista + Luo polaari- tai suorakaideruudukon valitusta kohteesta Draft_BSpline - + B-Spline Bézier-käyräviiva - + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain - Luo usean pisteen bézier-käyräviivaa. CTRL kohdistaa. SHIFT rajoittaa + Luo usean pisteen bézier-käyräviivaa. CTRL poimintaan, SHIFT luo rajoitteen @@ -89,44 +100,44 @@ Creates a Bezier curve. CTRL to snap, SHIFT to constrain - Creates a Bezier curve. CTRL to snap, SHIFT to constrain + Luo Bezier-käyrän. CTRL:lla poiminta, SHIFT luo rajoitteen Draft_Circle - + Circle Ympyrä - + Creates a circle. CTRL to snap, ALT to select tangent objects - Luo ympyrän. CTRL kohdistaa kohteeseen, ALT valitsee tangentin objekteille + Luo ympyrän. CTRL poimintaan, ALT valitsee tangenttikohteita Draft_Clone - + Clone - Kopioi + Kloonaa - + Clones the selected object(s) - Kopioi valitut objektit + Kloonaa valittu kohde(kohteet) Draft_CloseLine - + Close Line - Sulje Viiva + Sulje viiva - + Closes the line being drawn Sulkee piirretyn viivan @@ -134,12 +145,12 @@ Draft_DelPoint - + Remove Point Poista piste - + Removes a point from an existing wire or bspline Poistaa pisteen olemassa olevasta langasta tai bézier-käyräviivasta @@ -147,46 +158,46 @@ Draft_Dimension - + Dimension Mitta - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment - Luo mitta. CTRL-kohdista, SHIFT-rajoite, ALT-valittu segmentti + Luo mitta. CTRL-poimintaan, SHIFT-rajoita, ALT-valitse segmentti Draft_Downgrade - + Downgrade - Alennettava + Päivitä edelliseen - + Explodes the selected objects into simpler objects, or subtract faces - Räjäyttää valitut objektit yksinkertaisiksi objekteiksi tai vahentää tahkoja + Räjäyttää auki valitut objektit yksinkertaisiksi objekteiksi tai vahentää näkymäpintoja Draft_Draft2Sketch - + Draft to Sketch - Hahmottele luonnos + Tee vedos luonnokseen Draft_Drawing - + Drawing Piirustus - + Puts the selected objects on a Drawing sheet. Siirtää valitut objektit piirustuksen arkille. @@ -194,12 +205,12 @@ Draft_Edit - + Edit Muokkaa - + Edits the active object Muokkaa aktiivista objektia @@ -207,38 +218,38 @@ Draft_Ellipse - + Ellipse Ellipsi - + Creates an ellipse. CTRL to snap - Creates an ellipse. CTRL to snap + Luo ellipsin. CTRL:lla poiminta Draft_Facebinder - + Facebinder - Facebinder + Tahkojen liittäjä - + Creates a facebinder object from selected face(s) - Creates a facebinder object from selected face(s) + Luo liitettyjen tahkojen kohde valitu(i)sta tahko(i)sta Draft_FinishLine - + Finish line Viimeistele viiva - + Finishes a line without closing it Viimeistele viiva sulkematta sitä @@ -246,103 +257,90 @@ Draft_FlipDimension - + Flip Dimension - Flip Dimension + Vaihda ulottuvuus - + Flip the normal direction of a dimension - Flip the normal direction of a dimension + Vaihda ulottuvuus normaalisuuntaan Draft_Heal - + Heal - Heal + Paranna - - Heal faultly Draft objects saved from an earlier FreeCAD version - Heal faultly Draft objects saved from an earlier FreeCAD version - - - - Draft_Layer - - - Layer - Layer - - - - Adds a layer - Adds a layer + + Heal faulty Draft objects saved from an earlier FreeCAD version + Paranna vialliset vedoskohteet, jotka on tallennettu aiemmalla FreeCAD-versiolla Draft_Line - + Line Viiva - + Creates a 2-point line. CTRL to snap, SHIFT to constrain - Luo 2 pisteen viiva. CTRL kohdistaa kohteisiin, SHIFT tekee rajoituksia + Luo 2 pisteen viiva. CTRL poimintaan, SHIFT tekee rajoituksia Draft_Move - + Move Siirrä - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy - Siirtää valittuja objekteja 2 pisteen välillä. CTRL-kohdista, SHIFT-rajoita, ALT-kopioi + Siirtää valittuja objekteja 2 pisteen välillä. CTRL-poiminta, SHIFT-rajoita, ALT-kopioi Draft_Offset - + Offset Siirtymä - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy - Aktiivisen objektin siirrokset. CTRL kohdistaa, SHIFT rajoittaa, ALT kopioi + Aktiivisen kohteen siirtymät. CTRL poiminta, SHIFT rajoittaa, ALT kopioi Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. - Creates copies of a selected object along a selected path. + Luo valitun objektin kopiot pitkin valittua polkua. Draft_Point - + Point Piste - + Creates a point object Luo pisteobjektin @@ -350,77 +348,77 @@ Draft_Polygon - + Polygon Monikulmio - + Creates a regular polygon. CTRL to snap, SHIFT to constrain - Luo säännöllinen monikulmio. CTRL kohdistaa, SHIFT rajoittaa + Luo säännöllinen monikulmio. CTRL poiminta, SHIFT rajoittaa Draft_Rectangle - + Rectangle Suorakulmio - + Creates a 2-point rectangle. CTRL to snap - Luo 2-pisteen suorakaide. CTRL kohdistaa kohteisiin + Luo 2-pisteen suorakaide. CTRL poimintaan Draft_Rotate - + Rotate Pyöritä - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy - Pyörittää valittuja objekteja. CTRL-kohdista, SHIFT-rajoita, ALT-luo kopio + Pyörittää valittuja objekteja. CTRL-poiminta, SHIFT-rajoita, ALT-luo kopio Draft_Scale - + Scale - Skaalaa + Mittakaava - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy - Skaalaa valitut objektit peruspisteestä. CTRL kohdistaa, SHIFT rajoittaa, ALT kopioi + Skaalaa valitut objektit peruspisteestä. CTRL poiminta, SHIFT rajoita, ALT kopioi Draft_SelectGroup - + Select group Valitse ryhmä - + Selects all objects with the same parents as this group - Valitsee kaikki objektit, joissa on samat vanhemmat tämän ryhmän kanssa + Valitsee kaikki objektit, joissa on samat vanhemmat kuin tällä ryhmällä Draft_SelectPlane - + SelectPlane Valitse pinta - + Select a working plane for geometry creation Valitse työskentelytaso geometrian luomista varten @@ -428,251 +426,251 @@ Draft_Shape2DView - + Shape 2D view Muodon 2D näkymä - + Creates Shape 2D views of selected objects Luo muodon 2D näkymän valituista objekteista - + Convert bidirectionally between Draft and Sketch objects - Muuntaa kaksisuuntaisesti luonnoksen ja hahmotelma objektien välillä + Muuntaa kaksisuuntaisesti vedoksen ja luonnoksen objektien välillä Draft_ShapeString - + Shape from text... - Shape from text... + Muoto tekstistä... - + Creates text string in shapes. - Creates text string in shapes. + Luo merkkijonon muodoissa. Draft_ShowSnapBar - + Show Snap Bar - Näytä Snap Bar + Näytä poimintatyökalupalkki - + Shows Draft snap toolbar - Näyttää luonnostelman kohdistustyökalupalkin + Näyttää vedoksen poimintatyökalupalkin Draft_Snap_Angle - + Angles - Angles + Kulmat - + Snaps to 45 and 90 degrees points on arcs and circles - Snaps to 45 and 90 degrees points on arcs and circles + Poimii 45 ja 90 asteen pisteisiin kaarissa ja ympyröissä Draft_Snap_Center - + Center - Center + Keskikohta - + Snaps to center of circles and arcs - Snaps to center of circles and arcs + Poimii ympyröiden ja kaarien keskipisteeseen Draft_Snap_Dimensions - + Dimensions Mitat - + Shows temporary dimensions when snapping to Arch objects - Shows temporary dimensions when snapping to Arch objects + Näyttää väliaikaisia ulottuvuuksia kun poimitaan kaarikohteisiin Draft_Snap_Endpoint - + Endpoint - Endpoint + Päätepiste - + Snaps to endpoints of edges - Snaps to endpoints of edges + Poimii reunojen päätepisteisiin Draft_Snap_Extension - + Extension - Extension + Laajennus - + Snaps to extension of edges - Snaps to extension of edges + Poimii reunojen laajennuksiin Draft_Snap_Grid - + Grid - Grid + Ruudukko - + Snaps to grid points - Snaps to grid points + Poimii ruudukon pisteisiin Draft_Snap_Intersection - + Intersection Risteys - + Snaps to edges intersections - Snaps to edges intersections + Poimii reunojen leikkauksiin Draft_Snap_Lock - + Toggle On/Off - Toggle On/Off + Vaihda päälle/pois - + Activates/deactivates all snap tools at once - Activates/deactivates all snap tools at once + Aktivoi/poistaa kaikki poimintatyökalut kerralla Draft_Snap_Midpoint - + Midpoint - Midpoint + Keskipiste - + Snaps to midpoints of edges - Snaps to midpoints of edges + Poimii reunojen keskipisteisiin Draft_Snap_Near - + Nearest - Nearest + Lähin - + Snaps to nearest point on edges - Snaps to nearest point on edges + Poimii lähimpään reunojen pisteeseen Draft_Snap_Ortho - + Ortho - Ortho + Orto - + Snaps to orthogonal and 45 degrees directions - Snaps to orthogonal and 45 degrees directions + Poimii kohtisuoriin ja 45 asteen suuntiin Draft_Snap_Parallel - + Parallel - Parallel + Samansuuntainen - + Snaps to parallel directions of edges - Snaps to parallel directions of edges + Poimii reunoihin samansuuntaisesti Draft_Snap_Perpendicular - + Perpendicular - Perpendicular + Kohtisuorassa - + Snaps to perpendicular points on edges - Snaps to perpendicular points on edges + Poimii kohtisuoriin pisteisiin reunoissa Draft_Snap_WorkingPlane - + Working Plane - Working Plane + Työskentelytaso - + Restricts the snapped point to the current working plane - Restricts the snapped point to the current working plane + Rajoittaa poimitun kohta nykyiseen työtasoon Draft_Text - + Text Teksti - + Creates an annotation. CTRL to snap - Luo huomautus. CTRL-Kohdista + Luo huomautus. CTRL poimintaan Draft_ToggleConstructionMode - + Toggle construcion Mode Vaihda rajoitetilaan - + Toggles the Construction Mode for next objects. Vaihtaa rakennetilaa seuraaville objekteille. @@ -680,12 +678,12 @@ Draft_ToggleContinueMode - + Toggle Continue Mode - Toggle Continue Mode + Vaihda jatka-edelleen tilaan - + Toggles the Continue Mode for next commands. Kytkee jatkuvuustilan seuraaville komennoille. @@ -693,12 +691,12 @@ Draft_ToggleDisplayMode - + Toggle display mode - Vaihda näyttö tilaan + Vaihda näyttötilaa - + Swaps display mode of selected objects between wireframe and flatlines Vaihtaa näyttötilaan valittujen objektien Lankamallin ja nollaviivojen välillä @@ -706,77 +704,90 @@ Draft_ToggleGrid - + Toggle Grid Näytä tai piilota ruudukko - - Toggles the Draft gid on/off - Vaihtaa luonnos ruudukon päälle/pois + + Toggles the Draft grid on/off + Vaihtaa vedosruudukon päälle/pois Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts - Trimmaa tai laajentaa valitut objektit, tai pursottaa yhden tahkot. CTRL kohdistaa, SHIFT rajoittaa nykyistä segmenttiä tai normaalille segmentille, ALT kääntää + Leikkaa tai laajentaa valitut objektit, tai pursottaa yhden tahkot. CTRL poimii, SHIFT rajoittaa nykyiseen segmenttiin tai normaalille segmentille, ALT kääntää Draft_UndoLine - + Undo last segment Kumoa viimeinen segmentti - + Undoes the last drawn segment of the line being drawn - Kumoaa viimeksi piirretyt segmentit piirretystä piirustuksesta + Kumoaa viimeksi piirretyn segmentin piirretystä viivasta Draft_Upgrade - + Upgrade Päivitä - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces Yhdistää valitut objektit yhdeksi tai muuntaa suljetut johtimet täytetyiksi tahkoiksi tai yhdistää tahkot - Draft_Wire + Draft_VisGroup - - DWire - DWire + + VisGroup + VisGroup - + + Adds a VisGroup + Lisää VisGroup + + + + Draft_Wire + + + DWire + DLanka + + + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Luo usean pisteen luonnosmaisen lankamallin (DraftWire/DWire). Paina CTRL kohdistaaksesi tai SHIFT rajoittaaksesi + Luo usean pisteen vedoslankamallin (DraftWire/DWire). Paina CTRL poimintaan tai SHIFT rajoittaaksesi Draft_WireToBSpline - + Wire to BSpline Lanka Bézier-käyräviivaksi - + Converts between Wire and BSpline Muuntaa langan ja Bézier-käyräviivan välillä @@ -786,42 +797,42 @@ General Draft Settings - Yleiset vedos asetukset + Yleiset vedosasetukset the default color for new objects - Oletus väri uusille objekteille + Oletusväri uusille objekteille the default linewidth for new objects - oletusarvoinen viivanpaksuus uusille objekteille + oletusviivanpaksuus uusille objekteille the default color for snap symbols - oletusarvoinen väri kohdistettaville symboleille + oletusväri poimintasymboleille - + This is the default color for objects being drawn while in construction mode. - Tämä on oletusarvoinen väri objekteille jotka on piirretty rakennetilassa. - - - - This is the default group name for construction geometry - Tämä on oletusarvoinen ryhmän nimi rakennetilan geometrioille + Tämä on oletusväri objekteille jotka on piirretty rakennetilassa. + This is the default group name for construction geometry + Tämä on oletusvalinta ryhmän nimeksi rakennetilan geometrioille + + + Construction Rakenne check this if you want to use the color/linewidth from the toolbar as default - Valitse tämä, jos haluat käyttää väriä/viivanleveyttä työkalupalkista oletusarvoisesti + Valitse tämä, jos haluat käyttää väriä/viivanleveyttä työkalupalkista oletusvalintana @@ -836,12 +847,12 @@ Global copy mode - Paikallinen kopiointitila + Yleinen kopiointitila If this is checked, objects will appear as filled as default. Otherwise, they will appear as wireframe - Jos tämä vaihtoehto on valittuna, objektit näkyvät oletusarvon mukaan täytettynä. Muutoin ne näkyvät Lankamallina + Jos tämä vaihtoehto on valittuna, objektit näkyvät oletusvalinnan mukaan täytettynä. Muutoin ne näkyvät lankamallina @@ -884,7 +895,7 @@ It can be a font name such as "Arial", a default style such as "sans", "serif" or "mono", or a family such as "Arial,Helvetica,sans" or a name with a style such as "Arial:Bold" - Tämä on oletusfontin nimi kaikille tekstiluonnoksille ja mitoille. Se voi olla fontin nimi, kuten &quot;Arial&quot;, oletustyyli kuten &quot;sans&quot;, &quot;serif&quot; tai &quot;mono&quot;, tai perhe, kuten &quot;Arial, Helvetica, sans&quot; tai tyylin nimi kuten &quot; Arial: Bold &quot; + Tämä on oletusfontin nimi kaikille vedoksen teksteille ja mitoille. Se voi olla fontin nimi kuten "Arial", oletustyyli kuten "sans", "serif" tai "mono", tai perhe kuten "Arial,Helvetica,sans" tai tyylin nimi kuten "Arial:Bold" @@ -917,24 +928,24 @@ such as "Arial:Bold" Alkuperäinen väri ja normaali viivanleveys - + if this is checked, paper space objects will be imported too - Jos tämä vaihtoehto on valittuna, paperin tila objekteille täytyy olla myös tuotuna + Jos tämä vaihtoehto on valittuna, paperin tila objektit tuodaan myös mukaan - + if this is unchecked, texts/mtexts won't be imported - Jos tämä ei ole valittuna, tekstejä/mtekstejä ei voi tuoda + Jos tämä ei ole valittuna, niin tekstejä/mtekstejä ei tuoda - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. - Kun viet käyräviivoja DXF:ään, ne muunnetaan murtoviivoiksi. Tämä arvo on enintään pituus kunkin murtoviivan segmenteille. Jos 0, sitten koko käyräviiva käsitellään suorana segmenttinä. + Kun viet käyräviivoja DXF:ään, ne muunnetaan murtoviivoiksi. Tämä arvo on enimmäispituus kunkin murtoviivan segmenteille. Jos 0, niin sitten koko käyräviiva käsitellään suorana segmenttinä. This is the method choosed for importing SVG object color into FreeCAD. - Tämä menetelmä on valittu SVG objektin värien tuonnille FreeCAD:ssa. + Tämä menetelmä on valittu SVG objektin värien tuonnille FreeCAD:iin. @@ -952,7 +963,7 @@ such as "Arial:Bold" Yleiset asetukset - + Construction group name Rajoiteryhmän nimi @@ -965,25 +976,25 @@ such as "Arial:Bold" This is the value used by functions that use a tolerance. Values with differences below this value will be treated as same. - Tämä arvo on käytetty toiminnoille, jotka käyttävät toleranssia. Arvojen erot alle tämän arvon käsitellään samana. + Tämä arvo on käytössä toiminnoissa, jotka käyttävät toleranssia. Arvojen erot alle tämän arvon käsitellään samana. - + DXF format options - DXF-muotoiluasetukset + DXF-muodon asetukset - + Check this if you want the non-named blocks (beginning with a *) to be imported too - Valitse tämä jos haluat että ei-nimettyjä blokkeja (alkaen a *) voidaan myös tuoda + Valitse tämä jos haluat että ei-nimettyjä lohkoja (alkaen a *) voidaan myös tuoda - + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... Jos valittu, freecad yrittää yhdistää päällekkäisiä objekteja johdoiksi. Varo, tämä voi kestää hetken ... - + Join geometry Yhdistä geometria @@ -1005,7 +1016,7 @@ Values with differences below this value will be treated as same. Here you can specify a directory containing SVG files containing <pattern> definitions that can be added to the standard Draft hatch patterns - Täällä voit määrittää SVG-tiedostoja sisältävän hakemiston joka sisältää <pattern> määritelmiä, jotka voidaan lisätä draft-luonnoksen standardiin aukkojen malleina + Täällä voit määrittää SVG-tiedostoja sisältävän hakemiston joka sisältää <pattern> määritelmiä, jotka voidaan lisätä standardiin vedos-täyttökuvio malleihin @@ -1015,12 +1026,12 @@ Values with differences below this value will be treated as same. This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction - Tämä on UI tila jossa Hahmotelman moduuli toimii: Työkalu tilassa sijoitetaam kaikki Hahmotelman asetukset erillisessä työkalurivissä, kun tehtäväpalkin tila käyttää FreeCAD Tehtävänäkymää järjestelmän käyttäjän kaikille toimille + Tämä on UI tila, jossa vedoksen moduuli toimii: Työkalu tilassa sijoitetaan kaikki vedosasetukset erilliseen työkalupalkkiin, kun taas tehtäväpalkin tila käyttää FreeCAD:n tehtävänäkymä -järjestelmää käyttäjän kaikkiin toimiin Toolbar - Työkalurivi + Työkalupalkki @@ -1030,7 +1041,7 @@ Values with differences below this value will be treated as same. Constrain mod - Rajoite muoto + Rajoite toimintotila @@ -1055,17 +1066,17 @@ Values with differences below this value will be treated as same. Snap mod - Kohdistus muoto + Poiminta toimintotila The snap modifier key - Kohdistuksen muokkausnäppäin + Poiminnan muokkausnäppäin Alt mod - Alt muoto + Alt toimintotila @@ -1075,7 +1086,7 @@ Values with differences below this value will be treated as same. Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. - Normaalisti, kun kopioidaan esineitä, kopioitavat ovat valittuna. Jos tämä vaihtoehto on valittu, perus objektit ovat valittuna niiden sijaan. + Normaalisti, kun kopioidaan esineitä, niin kopioitavat valitaan. Jos tämä vaihtoehto on valittuna, niin sen sijaan valitaan perusobjektit. @@ -1083,34 +1094,34 @@ Values with differences below this value will be treated as same. Valitse perusobjektit kopioinnin jälkeen - + If checked, a grid will appear when drawing - Jos valintaruutu on valittuna, ruudukko näkyy piirrettäessä + Jos tämä on valittuna, ruudukko näkyy piirrettäessä - + Use grid Käytä ruudukkoa - + Grid spacing Ruudukon välit - + The spacing between each grid line Ruudukon viivojen välit - + Main lines every Pääviivat joka - + Mainlines will be drawn thicker. Specify here how many squares between mainlines. - Pääviivat ovat arvotaan paksumpia. Määritä tässä kuinka monta ruutua on pääviivojen välillä. + Pääviivat ovat paksumpia. Määritä tässä, kuinka monta ruutua on pääviivojen välillä. @@ -1125,7 +1136,7 @@ Values with differences below this value will be treated as same. This is the orientation of the dimension texts when those dimensions are vertical. Default is left, which is the ISO standard. - Tämä on mitan tekstien suunta, kun nämä mitat ovat pystysuunnassa. Oletusarvo on vasen, joka on ISO-standardi. + Tämä on mittatekstien suunta, kun nämä mitat ovat pystysuunnassa. Oletusarvo on vasen, joka on ISO-standardi. @@ -1138,24 +1149,24 @@ Values with differences below this value will be treated as same. Oikea - + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable - Jos tämä on valittuna, objektit samasta kerroksesta yhdistetään yhdeksi Hahmotelman Lohkoiksi, näyttö kääntyy nopeammin, mutta tekee niistä vähemmän helpon muokata + Jos tämä on valittuna, objektit samasta kerroksesta yhdistetään vedoslohkoiksi, kääntäen näytön nopeammaksi, mutta tekee niiden muokkauksen vähemmän helpoksi - + Group layers into blocks - Ryhmän kerrokset lohkoiksi + Ryhmäkerrokset lohkoiksi - + If this is checked, all objects containing faces will be exported as 3d polyfaces Jos tämä on valittuna, kaikki objektit joissa tahkoja viedään 3D monitahokkaiksi - + Export 3D objects as polyface meshes - Vie 3D objektit monitahkoisena verkkona + Vie 3D objektit monitahkoisiksi verkkopinnoiksi @@ -1165,27 +1176,27 @@ Values with differences below this value will be treated as same. Hide Draft workbench - Piilota Vedostyöpöytä + Piilota vedostyöpöytä If checked, the Snap toolbar will be shown whenever you use snapping - Jos valittu, automaattikohdistus työkalupalkki näytetään aina, kun käytät automaattikohdistusta + Jos valittuna, niin poiminnan työkalupalkki näytetään aina, kun käytät poimintaa Show Draft Snap toolbar - Näytä luonnostelman kohdistustyökalupalkki + Näytä vedoksen poimintatyökalupalkki Hide Draft snap toolbar after use - Piilota luonnostelman kohdistustyökalupalkki käytön jälkeen + Piilota vedoksen poimintatyökalupalkki käytön jälkeen if checked, a widget indicating the current working plane orientation appears during drawing operations - jos valittu, näkyy piirto toimintojen aikana kuvake joka kertoo tämän hetkisen työtason suunnan + jos valittuna, niin näkyy piirtotoimintojen aikana kuvake, joka kertoo tämän hetkisen työtason suunnan @@ -1193,44 +1204,44 @@ Values with differences below this value will be treated as same. Näytä Työtason seuraaja - + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command - Jos valittuna, luonnos ruudukko on aina näkyvissä, kun luonnos työpöytä on aktiivinen. Muutoin näkyvissä vain komentoa käytettäessä + Jos valittuna, vedosruudukko on aina näkyvissä, kun vedostyöpöytä on aktiivinen. Muutoin näkyvissä vain komentoa käytettäessä - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document - Jos vailitty, tuotu teksti saa aina Vedos tekstikoon eikä sitä kokoa joka on määritelty DFX dokumentissa + Jos valittuna, tuotu teksti saa aina Vedoksen tekstikoon eikä sitä kokoa, joka on määritelty DFX dokumentissa - + Use standard font size for texts Käytä oletusfonttikokoa teksteille - + If this is checked, hatches will be converted into simple wires Jos valittuna, täyttökuvio muunnetaan yksinkertaisiksi viivoiksi - + Import hatch boundaries as wires Tuo täyttökuvion rajat viivoina - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width - Jos tämä on vailittu, kun moniviivoilla on leveys määritelty renderöidään moniviivat suljettuina viivoina joilla on oikea leveys + Jos tämä on valittuna: Kun moniviivoilla on määritelty leveys, ne renderöidään suljettuina moniviivoina, joilla on oikea leveys - + Render polylines with width Renderöi moniviivat leveyksillä Style of SVG file to write when exporting a Sketch. - SVG tiedoston tyyli Sketchiä vietäessä. + SVG tiedoston tyyli vedosta vietäessä. @@ -1255,102 +1266,102 @@ Values with differences below this value will be treated as same. When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. - When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. + Kun tämä on valittuna, vedos-työkalut luovat osan perusalkioita vedoskohteiden tilalta, jos käytettävissä. Use Part Primitives when available - Use Part Primitives when available + Käytä osien perusalkioita, kun käytettävissä Snapping - Snapping + Katkaiseva If this is checked, snapping is activated without the need to press the snap mod key - If this is checked, snapping is activated without the need to press the snap mod key + Jos tämä vaihtoehto on valittuna, poiminta aktivoituu ilman tarvetta painaa poimintatoiminto -näppäintä Always snap (disable snap mod) - Always snap (disable snap mod) + Aina poimi (poista poiminta toimintotila) - + Construction geometry Rakenteen geometria - + Construction geometry color - Construction geometry color + Rakentamisen geometria väri - + Import - Import - - - - texts and dimensions - texts and dimensions - - - - points - points + Tuonti + texts and dimensions + tekstit ja mitat + + + + points + pisteet + + + layouts - layouts + ulkoasut - + *blocks - *blocks + * lohkot - + If this is checked, the exported objects will be projected to reflect the current view direction - If this is checked, the exported objects will be projected to reflect the current view direction + Jos tämä on valittuna, viedyt kohteet kuvautuvat vastaamaan nykyisen näkymän suuntaa - + Project exported objects along current view direction - Project exported objects along current view direction + Projetista viedyt kohteet nykyisen näkymän suuntaan - + Ellipse export is badly supported. Use this to export them as polylines instead. - Ellipse export is badly supported. Use this to export them as polylines instead. + Ellipsin vientiä tuetaan huonosti. Tämän avulla voit viedä ne sen sijaan moniviivoina. - + DWG format options - DWG format options + DWG muotoiluasetukset - + Path to Teigha File Converter - Path to Teigha File Converter + Kansio Teigha -tiedostomuuntimeen - + The path to your Teigha File Converter executable - The path to your Teigha File Converter executable + Kansio sinun Teigha -tiedostomuuntimen suoritettaviin ohjelmiin Visual settings - Visual settings + Visuaaliset asetukset Visual Settings - Visual Settings + Visuaaliset asetukset @@ -1360,899 +1371,950 @@ Values with differences below this value will be treated as same. Default line width - Default line width + Oletusarvo viivan leveydelle Snap symbols style - Snap symbols style + Poimintasymbolien tyyli Draft classic style - Draft classic style + Vedos klassiseen tyyliin Bitsnpieces style - Bitsnpieces style + Bitsnpieces tyyli Color - Color + Väri Hatch patterns resolution - Hatch patterns resolution + Täyttökuvioiden piirtotarkkuus Grid - Grid + Ruudukko - + Always show the grid - Always show the grid + Näytä aina ruudukko Texts and dimensions - Texts and dimensions + Tekstit ja mitat Texts - Texts + Tekstit font - font + fontti Internal font - Internal font + Sisäinen fontti size - size + koko - + Dimensions arrows - Dimensions arrows + Mittojen nuolet - + style - style + tyyli - + Dot - Dot + Piste - + Circle Ympyrä - - - Arrow - Arrow - - - - The default size of arrows - The default size of arrows - - - - Dimensions lines - Dimensions lines - - - - text above - text above - - text inside - text inside + Arrow + Nuoli + The default size of arrows + Nuolien oletuskoko + + + The default size of dimensions extension lines - The default size of dimensions extension lines + Mittojen jatkoviivojen oletuskoko Dimensions text - Dimensions text + Mittojen teksti orientation - orientation + suunta spacing - spacing + välistys The space between the dimension line and the dimension text - The space between the dimension line and the dimension text + Mittaviivan ja mittatekstin välitila Default ShapeString Font File - Default ShapeString Font File + Oletus ShapeString fonttitiedosto Select a font file - Select a font file + Valitse fontti-tiedosto Fill objects with faces whenever possible - Fill objects with faces whenever possible + Täytä kohteet pinnoilla aina kun mahdollista - - DXF / DWG options - DXF / DWG options - - - + Create Luo - - If thi sis checked, only standard Part objects will be created (fastest) - If thi sis checked, only standard Part objects will be created (fastest) - - - + simple Part shapes - simple Part shapes + yksinkertaisia osa muotoja - + If this is checked, parametric Draft objects will be created whenever possible - If this is checked, parametric Draft objects will be created whenever possible + Jos tämä vaihtoehto on valittuna, parametriset vedoskohteet luodaan mahdollisuuksien mukaan - + Draft objects - Draft objects + Vedoksen kohteet - + If this is checked, sketches will be created whenever possible - If this is checked, sketches will be created whenever possible + Jos tämä vaihtoehto on valittuna, luonnoksia luodaan mahdollisuuksien mukaan - + Sketches - Sketches + Luonnoksia - + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. - If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. + Jos tämä vaihtoehto on valittuna, värit haetaan DXF-kohteista aina kun mahdollista. Muuten käytetään oletusvärejä. - + Get original colors from the DXF file - Get original colors from the DXF file + Hanki alkuperäiset värit DXF-tiedostosta - - If this is checked, DXF layers will be imported as Draft layers - If this is checked, DXF layers will be imported as Draft layers - - - - Use Draft Layers - Use Draft Layers - - - + Treat ellipses and splines as polylines - Treat ellipses and splines as polylines + Käsittele ellipsejä ja käyriä moniviivoina - + Max Spline Segment: - Max Spline Segment: - - - - SVG / OCA options - SVG / OCA options + Max käyrän segmentti: Export style - Export style + Vie tyyli Snapping settings - Snapping settings + Poiminta-asetukset Show the unit suffix in dimensions - Show the unit suffix in dimensions + Näytä yksikön päätteet mitoissa + + + + DXF / DWG + DXF / DWG + + + + Automatic update + Automaattinen päivitys + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + <html><head/> <body><p>Valitsemalla tämän voit antaa FreeCAD:in ladata ja päivittää</p> <p>tarvittavat komponentit, jotka tarvitaan DXF tuontiin ja vientiin. Voit myös tehdä sen</p> <p>manuaalisesti käymällä https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + + + + Allow FreeCAD to automatically download and update the DXF libraries + Salli FreeCAD:in automaattisesti ladata ja päivittää DXF-kirjastot + + + + If this is checked, only standard Part objects will be created (fastest) + Jos tämä vaihtoehto on valittuna, vain standardit osakohteet luodaan (nopein) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + Jos tämä on valittuna, DXF kerrokset tuodaan vedos-VisGroups -muodossa + + + + Use VisGroups + Käytä VisGroups + + + + mm + mm + + + + SVG / OCA + SVG / OCA + + + + Grid size + Ruudukon koko + + + + the number of horizontal or vertical lines of the grid + ruudukon vaaka- tai pystyrivien määrä + + + + lines + rivit + + + + Dimensions + Mitat + + + + display mode + näyttötila + + + + text above (2D) + teksti yläpuolella (2D) + + + + text inside (3D) + tekstin sisällä (3D) + + + + extension lines size + laajennusviivojen koko + + + + Drawing views + Piirroksen näkymät + + + + Dashed line definition + Katkoviivan määritelmä + + + + A SVG linestyle definition + SVG viivatyypin määritelmä + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + pisteviivan määritelmä + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Pilkutetun viivan määritelmä + + + + 0.02,0.02 + 0.02,0.02 Workbench - + Draft Snap - Draft Snap + Vedoksen poiminta + + + + Draft creation tools + Vedoksen luomistyökalut - Draft creation tools - Luonnoksen luomistyökalut - - - Draft modification tools - Luonnoksen muokkaustyökalut + Vedoksen muokkaustyökalut draft - + Draft Command Bar - Draft Command Bar + Vedos komentopalkki - + active command: aktiivinen komento: - + None Ei mitään - + Active Draft command Aktiivinen vedos-komento - + X coordinate of next point X-koordinaatin seuraava kohta - + X X - + Y Y - + Z Z - + Y coordinate of next point Y-koordinaatin seuraava kohta - + Z coordinate of next point Z-koordinaatin seuraava kohta - + Radius Säde - + Radius of Circle Ympyrän säde - + &Relative &Suhteellinen - + Coordinates relative to last point or absolute (SPACE) Koordinaatit suhteessa viimeiseen tai suhteelliseen pisteeseen (VÄLILYÖNTI) - + F&illed T&äytetty - + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) - Rasti tämä, jos objektin pitäisi näkyä täytettynä, muuten se näkyy rautalankana (i) + Rastita tämä, jos objektin pitäisi näkyä täytettynä, muuten se näkyy rautalankana (i) - + &Finish &Valmis - + Finishes the current drawing or editing operation (F) Viimeistelee nykyisen piirustuksen tai muokkaustoiminnon (F) - + If checked, command will not finish until you press the command button again Jos valintaruutu on valittuna, komento ei ole valmis, ennenkuin painat komentopainiketta uudelleen - - &Continue - &Jatka - - - + If checked, an OCC-style offset will be performed instead of the classic offset - Jos valittu, OCC-tyylin siirtymä tehdään Classisen siirtymän sijaan + Jos valittuna, niin OCC-tyylin siirtymä tehdään klassisen siirtymän sijaan - + &OCC-style offset - &OCC-tyyli siirtymä + &OCC-tyylin siirtymä - + Add points to the current object Lisää pisteitä nykyiseen objektiin - + Remove points from the current object Pisteiden poistaminen nykyisestä objektista - + Make Bezier node sharp - Make Bezier node sharp + Tee Bezier solmupisteestä terävä - + Make Bezier node tangent - Make Bezier node tangent + Tee Bezier solmupisteestä tangentti - + Make Bezier node symmetric - Make Bezier node symmetric + Tee Bezier solmupisteestä symmetrinen - + &Undo &Kumoa - + Undo the last segment (CTRL+Z) - Peruuta viimeisin segmentti (CTRL+Z) + Peru viimeisin segmentti (CTRL+Z) - + &Close &Sulje - + Finishes and closes the current line (C) Viimeistelee ja sulkee nykyisen viivan (C) - + &Wipe &Pyyhi - + Wipes the existing segments of this line and starts again from the last point (W) Pyyhkii nykyiset segmentit tästä viivasta ja aloittaa uudelleen viimeisimmästä pisteestä (W) - + Number of sides Sivujen lukumäärä - + Offset Siirtymä - + XY XY - + Select XY plane - Valitse xy-taso + Valitse XY-taso - + XZ XZ - + Select XZ plane Valitse XZ-taso - + YZ YZ - + Select YZ plane Valitse YZ-taso - + View Näytä - + Select plane perpendicular to the current view - Valitse taso nykyiselle kohtisuoralle näkymälle + Valitse taso kohtisuorassa nykyiseen näkymään - + Do not project points to a drawing plane - Projektia ei kohdistettu piirustuksen tasoon + Ei projisoidu pisteitä piirustuksen tasoon - + &Copy &Kopioi - + If checked, objects will be copied instead of moved (C) Jos valintaruutu on valittuna, objektit kopioidaan siirtämisen sijasta (C) - + Text string to draw - Text string to draw + Merkkijono piirrokseen - + String Merkkijono - + Height of text - Height of text + Tekstin korkeus - + Height Korkeus - + Intercharacter spacing - Intercharacter spacing + Kirjaimien väli - + Tracking - Tracking + Seuranta - + Full path to font file: - Full path to font file: + Fonttitiedoston koko kansiopolku: - + Open a FileChooser for font file - Open a FileChooser for font file + Avaa TiedostonValitsin fontti-tiedostoa varten - + Set/unset a working plane - Set/unset a working plane + Aseta/poista työskentelytaso - + Line Color Viivan väri - + Face Color Tahkon väri - + Line Width Viivan leveys - + Font Size Fontin koko - + Apply to selected objects Käytä valittuihin kohteisiin - + Toggles Construction Mode - Vaihtaa rajoite tilaan + Vaihtaa rajoite toimintotilaa - + Select Plane Valitse taso - + Line Viiva - + DWire - DWire + DLanka - + Circle Ympyrä - + Center X Keskitä X - + Arc Kaari - + Point Piste - + Distance Etäisyys - + Trim rajaa - + Pick Object Valitse objekti - + Edit Muokkaa - + Global X - Global X + Yleinen X - + Global Y - Global Y + Yleinen Y - + Global Z - Global Z + Yleinen Z - + Local X - Local X + Paikallinen X - + Local Y - Local Y + Paikallinen Y - + Local Z - Local Z + Paikallinen Z - + Invalid Size value. Using 200.0. - Invalid Size value. Using 200.0. + Koon arvo ei kelpaa. Käytetään 200,0. - + Invalid Tracking value. Using 0. - Invalid Tracking value. Using 0. + Seuranta-arvo ei kelpaa. Käytetään 0. - + Please enter a text string. - Please enter a text string. + Kirjoita merkkijono. - + Select a Font file - Select a Font file + Valitse fontti-tiedosto - + Please enter a font file. - Please enter a font file. + Anna fonttitiedosto. - + Draft.makeBSpline: not enough points - Draft.makeBSpline: not enough points + Draft.makeBSpline: liian vähän pisteitä - + Draft.makeBSpline: Equal endpoints forced Closed - Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Yhtäläiset loppupisteet pakotettu suljetuksi + - + Draft.makeBSpline: Invalid pointslist - Draft.makeBSpline: Invalid pointslist + Draft.makeBSpline: Virheellinen pisteidenlista - + Found groups: closing each open object inside - Löytyi ryhmät: suljetaan kunkin avoimen objektin sisällä - - - - Found mesh(es): turning into Part shapes - - Found mesh(es): turning into Part shapes + Löytyi ryhmiä: suljetaan jokaisen sisältä avoimet objektit - - Found 1 solidificable object: solidifying it + + Found mesh(es): turning into Part shapes - Löytyi 1 kiinnittämätön objekti: tee siitä kiinteä + Löytyy verkkopinta(-pintoja): käännetään osa muotoihin + - + + Found 1 solidificable object: solidifying it + + Löytyi 1 kiinnittämätön objekti: tehdään siitä kiinteä + + + + Found 2 objects: fusing them Löydetty 2 objektia: yhdistellään ne - - Found several objects: making a shell - - Found several objects: making a shell - - - - - Found several coplanar objects or faces: making one face - - Found several coplanar objects or faces: making one face - - - - + Found 1 non-parametric objects: draftifying it Löytyi 1 ei-parametrinen objekti: hahmotellaan se - - Found 1 closed sketch object: making a face from it - - Löytyi 1 suljettu objektin sketsi: tehdään siitä tahko - - - - - Found closed wires: making faces - - Found closed wires: making faces - - - - + Found 1 open wire: closing it Löytyi 1 avoin lanka: suljetaan se - + Found several open wires: joining them - Found several open wires: joining them + Löytyi useita avoimia lankoja: liittymässä niihin - + Found several edges: wiring them Löytyi useita reunoja: langoitetaan ne - - Found several non-treatable objects: making compound - - Löytyi useita käsittelemättömiä objekteja: Toteutetaan yhdistäminen - - - + Unable to upgrade these objects. - Unable to upgrade these objects. + Ei voi päivittää näitä kohteita. - + Found 1 block: exploding it - Found 1 block: exploding it + Löytyi 1 lohko: räjäytetään se auki - + Found 1 parametric object: breaking its dependencies - Löytyi 1 parametrinen objekti: Riippuvuuksien rikkominen + Löytyi 1 parametrinen objekti: rikotaan riippuvuudet + - + Found 2 objects: subtracting them Löytyi 2 objektia: vähennetään ne - + Found several faces: splitting them Löytyi useita tahkoja: jaetaan ne - + Found several objects: subtracting them from the first one Löytyi useita objekteja: vähennetään ne ensimmäisestä - + Found 1 face: extracting its wires - Löytyi yksi tahko: purkaa sen langat + Löytyi yksi tahko: puretaan sen langat - + Found only wires: extracting their edges Löytyi vain lankoja: puretaan niiden reunat - + No more downgrade possible Laadun huonontaminen ei enää mahdollista - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. + _BSpline.createGeometry: suljettu samaan ensimmäiseen/viimeiseen kohtaan. Geometriaa ei päivitetä. - + Pick a face to define the drawing plane Napsauta tahkoa määritelläksesi piirustustason - + Pick first point: Napsauta ensimmäinen piste: - + Create Line - Create Line + Luo viiva - + Create DWire - Luo DWire + Luo vedosLanka (DWire) - + DWire has been closed - DWire on suljettu + VedosLanka (DWire) on suljettu - + Last point has been removed Viimeinen piste on poistettu - + Pick next point: - Napsauta seuraava piste: + Valitse seuraava piste: + - + Pick next point, or (F)inish or (C)lose: - Napsauta seuraava piste, tai viimeistele (F), tai sulje (C): + Valitse seuraava piste, tai viimeistele (F), tai sulje (C): + - + BSpline BSpline @@ -2263,7 +2325,7 @@ Values with differences below this value will be treated as same. Käyräviiva on suljettu - + Create BSpline Luo Bézier-käyräviiva @@ -2273,412 +2335,588 @@ Values with differences below this value will be treated as same. BezCurve - + Bezier curve has been closed - Bezier curve has been closed + Bezier käyrä on suljettu - + Create BezCurve - Create BezCurve + Luo Bezier käyrä - + Rectangle Suorakulmio - + Create Plane - Create Plane + Luo taso - + Create Rectangle Luo suorakulmio - + Pick opposite point: Napsauta vastakkainen piste: - + Pick center point: - Napsauta keskipiste: + Valitse keskipiste: + - + Pick radius: - Napsauta säde: + Valitse säde: + - + Pick start angle: - Napsauta aloituskulma: + Valitse aloituskulma: + - + Pick aperture: Valitse aukko: - + Create Circle - Luo Ympyrä + Luo ympyrä - + Create Arc - Luo Kaari + Luo kaari - + Start Angle Lähtökulma - + Aperture Aukko - + Aperture angle: Aukon kulma: - + Polygon Monikulmio - + Create Polygon Luo monikulmio - + Ellipse Ellipsi - + Create Ellipse - Create Ellipse + Luo ellipsi - + Text Teksti - + Pick location point: - Napsauta sijainti pisteelle: + Valitse sijainti kohta: + - + Create Text Luo teksti - + Dimension Mitta - + Create Dimension Luo mitta - + Edges don't intersect! Reunat eivät leikkaa! - + ShapeString - ShapeString + Muotoilujono - + Pick ShapeString location point: - Pick ShapeString location point: + Valitse muotoilujonon sijaintipiste: - + Create ShapeString - Create ShapeString + Luo muotoilujono - + Move Siirrä - + Select an object to move Valitse objekti siirtämistä varten - + Pick start point: - Napsauta aloituspiste: + Valitse aloituspiste: + - + Copy Kopio - + Pick end point: - Napsauta lopetuspiste: + Valitse lopetuspiste: + - + Change Style Muuta tyyliä - + Select an object to rotate Valitse pyöritettävä objekti - + Pick rotation center: - Osoita kiertoliikkeen keskikohta: + Valitse kiertoliikkeen keskikohta: - + Rotate Pyöritä - + Pick base angle: - Osoita peruskulma: + Valitse peruskulma: + - + Pick rotation angle: - Osoita kiertoliikkeen kulma: + Valitse kiertoliikkeen kulma: + - + Select an object to offset Valitse objekti siirtymälle - + Offset only works on one object at a time Siirtymä toimii vain yhdelle objektille kerrallaan - + Cannot offset this object type - Ei voi siirtää tätä objektityyppiä + Ei voida siirtää tätä objektityyppiä + - + Pick distance: - Napsauta etäisyys: + Valitse etäisyys: + - + Select an object to upgrade Valitse päivitettävä objekti - + Upgrade Päivitä - + Downgrade - Alennettava + Päivitä edelliseen - - Select an object to trim/extend - - Valitse objekti leikkaukselle/laajennokselle - - - + Scale - Skaalaa + Mittakaava - + Select an object to scale Valitse skaalattava objekti - + Pick base point: - Osoita peruspiste: + Valitse peruspiste: + - + Pick scale factor: - Osoita skaalauskerroin: + Valitse skaalauskerroin: + - + Select an object to project - Select an object to project + Valitse kohde projektiin - + Select a Draft object to edit - Select a Draft object to edit + Valitse vedoskohde muokkaamiseen - + This object type is not editable Tätä objektityyppiä ei voi muokata - + Active object must have more than two points/nodes Aktiivisessa objektissa on oltava enemmän kuin kaksi pistettä/solmua - + Selection is not a Knot - Selection is not a Knot + Valinta ei ole solmupiste - + Endpoint of BezCurve can't be smoothed - Endpoint of BezCurve can't be smoothed + Bezier käyrän päätepistettä ei voida tasoittaa - + Select an object to convert - Select an object to convert + Valitse muunnettava kohde - + Select an object to array - Select an object to array + Valitse kohde taulukkoon - + Please select base and path objects - Please select base and path objects + Valitse perus- ja kansiokohteet - + Create Point - Create Point + Luo piste - + Select an object to clone - Select an object to clone + Valitse kloonattava kohde - + Select face(s) on existing object(s) - Select face(s) on existing object(s) + Valitse tahko(-ja) olemassa olevasta kohteesta(kohteista) Teigha File Converter not found, DWG support is disabled. - Teigha File Converter not found, DWG support is disabled. + Teigha -tiedostomuunin ei löydy, DWG tuki on poistettu käytöstä. - - - Installed Macros - Asennetut makrot - - - - &Draft - &Luonnos - - - - Utilities - Utilities - + &Draft + &Vedos + + + + Utilities + Apuvälineet + + + Wire tools - Lanka työkalut + Lankatyökalut - + Snapping - Snapping + Katkaiseva - + Found 1 multi-solids compound: exploding it - Found 1 multi-solids compound: exploding it + Löytyi 1 monikiinteä yhdiste: räjäytetään se auki - + Sides - Sides + Sivut + + + + BSplines and Bezier curves are not supported by this tool + Tämä työkalu ei tue BSplines ja Bezier käyriä + + + + The given object is not planar and cannot be converted into a sketch. + Annettu kohde ei ole tasomainen eikä sitä voida muuntaa luonnokseen. + + + + Found several objects: creating a shell + + Löytyi useita kohteita: luodaan kuori /shell + + + + + Found several coplanar objects or faces: creating one face + + Löytyi useita samassa tasossa olevia kohteita tai tahkoja: luodaan yksi tahko + + + + + Found 1 linear object: converting to line + + Löytyi 1 lineaarinen kohde: muunnetaan viivaksi + + + + + Found 1 closed sketch object: creating a face from it + + Löytyi 1 suljettu luonnoskohde: tehdään siitä tahko + + + + + Found closed wires: creating faces + + Löytyi suljettuja langoituksia: luodaan tahkot + + + + + Found several non-treatable objects: creating compound + + Löytyi useita ei-käsiteltäviä kohdeita: luodaan yhdiste + + + + + Length + Pituus + + + + Angle + Kulma + + + + Length of current segment + Nykyisen segmentin pituus + + + + Angle of current segment + Nykyisen segmentin kulma + + + + Check this to lock the current angle (l) + Tarkista tämä lukitaksesi nykyisen kulman (l) + + + + Con&tinue + Jatka + + + + &Select edge + &Valitse reuna + + + + Selects an existing edge to be measured by this dimension (E) + Valitsee olemassa olevan reunan, joka mitataan tällä ulottuvuudella (E) + + + + Auto + Automaattinen + + + + Sorry, offset of Bezier curves is currently still not supported + + Valitettavasti Bezier-käyrien siirtymää ei tällä hetkellä vielä tueta + + + + + Convert to Sketch + Muunna luonnokseksi/sketch + + + + Convert to Draft + Muuntaa vedokseksi/draft + + + + Convert + Muunna + + + + Array + Taulukko + + + + Select object(s) to trim/extend + + Valitse kohde(kohteet) leikkaamiseen tai jatkamiseen + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + Näitä kohteita ei voi leikata, vain vedoksen langoitukset ja kaaret ovat tuettuja + + + + + Unable to trim these objects, too many wires + + Ei voida leikata näitä esineitä, liikaa langoituksia + + + + + These objects don't intersect + + Nämä kohteet eivät leikkaa toisiaan + + + + + Too many intersection points + + Liian monta risteyspistettä + + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + DXF tuonti/vienti kirjastot tarvitaan, jotta FreeCAD pystyy hoitamaan DXF-muotoa. Niitä ei löytynyt järjestelmästä. +Ole hyvä ja joko sallit FreeCADin ladata nämä kirjastot: + 1 - Lataa vedos työpöytä + 2 - valikosta Muokkaa > Asetukset > Tuonti/Vienti > DXF > Salli lataukset +Tai lataat nämä kirjastot manuaalisesti, kutenon on selitetty +https://github.com/yorikvanhavre/Draft-dxf-importer -osoitteessa diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.qm b/src/Mod/Draft/Resources/translations/Draft_fr.qm index 12e55e9156..08625c740a 100755 Binary files a/src/Mod/Draft/Resources/translations/Draft_fr.qm and b/src/Mod/Draft/Resources/translations/Draft_fr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.ts b/src/Mod/Draft/Resources/translations/Draft_fr.ts index 174df60828..6de1df63d5 100755 --- a/src/Mod/Draft/Resources/translations/Draft_fr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fr.ts @@ -1,15 +1,29 @@ + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + Échec du téléchargement des bibliothèques DXF. +S'il vous plaît, télécharger les manuellement à partir de : +https://github.com/yorikvanhavre/Draft-dxf-importer +et placer les dans votre dossier de macros. + + Draft_AddPoint - + Add Point Ajouter un point - + Adds a point to an existing wire/bspline Ajoute un point à un filaire ou bspline existant @@ -17,12 +31,12 @@ Draft_AddToGroup - + Add to group... Ajouter au groupe... - + Adds the selected object(s) to an existing group Ajoute l'objet sélectionné à un groupe existant @@ -30,12 +44,12 @@ Draft_ApplyStyle - + Apply Current Style Appliquer le style actuel - + Applies current line width and color to selected objects Appliquer l'épaisseur et la couleur de ligne actuelles aux objets sélectionnés @@ -43,12 +57,12 @@ Draft_Arc - + Arc Arc - + Creates an arc. CTRL to snap, SHIFT to constrain Crée un arc. CTRL pour accrocher aux objets, MAJ pour contraindre @@ -56,12 +70,12 @@ Draft_Array - + Array Réseau - + Creates a polar or rectangular array from a selected object Crée un réseau polaire ou rectangulaire à partir d'un objet sélectionné @@ -69,12 +83,12 @@ Draft_BSpline - + B-Spline B-Spline - + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain Crée une B-Spline à plusieurs points. CTRL pour accrocher, Maj pour contraindre @@ -95,12 +109,12 @@ Draft_Circle - + Circle Cercle - + Creates a circle. CTRL to snap, ALT to select tangent objects Crée un cercle. CTRL pour accrocher aux objets, MAJ pour contraindre @@ -108,12 +122,12 @@ Draft_Clone - + Clone Clone - + Clones the selected object(s) Clone les objets sélectionnés @@ -121,12 +135,12 @@ Draft_CloseLine - + Close Line Fermer la ligne - + Closes the line being drawn Fermer la ligne actuelle @@ -134,12 +148,12 @@ Draft_DelPoint - + Remove Point Supprimer un point - + Removes a point from an existing wire or bspline Supprime un point d'un filaire ou d'une bspline existant @@ -147,12 +161,12 @@ Draft_Dimension - + Dimension Cote - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Crée une cote. CTRL pour accrocher aux objets, MAJ pour contraindre, ALT pour sélectionner un segment @@ -160,12 +174,12 @@ Draft_Downgrade - + Downgrade Rétrograder - + Explodes the selected objects into simpler objects, or subtract faces Éclate les objets sélectionnés en objets plus simples, ou soustrait les faces @@ -173,7 +187,7 @@ Draft_Draft2Sketch - + Draft to Sketch Draft vers Esquisse @@ -181,12 +195,12 @@ Draft_Drawing - + Drawing Dessin - + Puts the selected objects on a Drawing sheet. Place les objets sélectionnés sur une feuille de dessin. @@ -194,12 +208,12 @@ Draft_Edit - + Edit Éditer - + Edits the active object Édite l'objet actif @@ -207,12 +221,12 @@ Draft_Ellipse - + Ellipse Ellipse - + Creates an ellipse. CTRL to snap Crée une ellipse. CTRL pour aimanter @@ -220,12 +234,12 @@ Draft_Facebinder - + Facebinder - Contraindre des faces + Lier des faces - + Creates a facebinder object from selected face(s) Crée un objet facebinder avec une copie de la ou les faces sélectionnées @@ -233,12 +247,12 @@ Draft_FinishLine - + Finish line Terminer la ligne - + Finishes a line without closing it Terminer la ligne sans la fermer @@ -246,12 +260,12 @@ Draft_FlipDimension - + Flip Dimension Inverser la direction de de la cote - + Flip the normal direction of a dimension Inverser la direction de la normale de la cote @@ -259,38 +273,25 @@ Draft_Heal - + Heal Réparer - - Heal faultly Draft objects saved from an earlier FreeCAD version - Réparer des ébauches erronés enregistrés avec une version antérieure de FreeCAD - - - - Draft_Layer - - - Layer - claques - - - - Adds a layer - ajouter un calque + + Heal faulty Draft objects saved from an earlier FreeCAD version + Réparer les objets de type ébauche défectueux enregistrés avec une version antérieure de FreeCAD Draft_Line - + Line Ligne - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Crée une ligne par deux points. CTRL pour accrocher aux objets, Maj pour contraindre @@ -298,12 +299,12 @@ Draft_Move - + Move Déplacer - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy Déplacer les objets sélectionnés entre 2 points. CTRL pour accrocher, MAJ pour contraindre, ALT pour copier @@ -311,12 +312,12 @@ Draft_Offset - + Offset Décalage - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Décale l'objet actif. CTRL pour accrocher, Maj pour contraindre, Alt pour copier @@ -324,12 +325,12 @@ Draft_PathArray - + PathArray matrice de copies - + Creates copies of a selected object along a selected path. Crée des copies d'un objet sélectionné le long d'un tracé sélectionné. @@ -337,12 +338,12 @@ Draft_Point - + Point Point - + Creates a point object Crée un objet point @@ -350,12 +351,12 @@ Draft_Polygon - + Polygon Polygone - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Crée un polygone régulier. CTRL pour accrocher, Maj pour contraindre @@ -363,12 +364,12 @@ Draft_Rectangle - + Rectangle Rectangle - + Creates a 2-point rectangle. CTRL to snap Crée un rectangle par deux points. CTRL pour accrocher aux objets @@ -376,12 +377,12 @@ Draft_Rotate - + Rotate Pivoter - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Faire pivoter les objets sélectionnés. CTRL pour accrocher, MAJ pour contraindre, ALT pour créer une copie @@ -389,12 +390,12 @@ Draft_Scale - + Scale Échelle - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Change l'échelle des objets sélectionnés à partir d'un point de base. CTRL pour accrocher, MAJ pour contraindre, ALT pour copier @@ -402,12 +403,12 @@ Draft_SelectGroup - + Select group Sélectionner le groupe - + Selects all objects with the same parents as this group Sélectionne tous les objets avec les mêmes parents que ce groupe @@ -415,12 +416,12 @@ Draft_SelectPlane - + SelectPlane Plan de travail - + Select a working plane for geometry creation Choisir un plan de travail pour la création d'objets 2D @@ -428,17 +429,17 @@ Draft_Shape2DView - + Shape 2D view Projection 2D d'une forme - + Creates Shape 2D views of selected objects Crée une projection 2D d'objets sélectionnés - + Convert bidirectionally between Draft and Sketch objects Conversion bidirectionnelle entre objets draft et esquisse @@ -446,12 +447,12 @@ Draft_ShapeString - + Shape from text... Forme du texte… - + Creates text string in shapes. Crée une chaîne de texte dans les formes. @@ -459,12 +460,12 @@ Draft_ShowSnapBar - + Show Snap Bar Monter la barre d'accrochage - + Shows Draft snap toolbar Montrer la barre d'outils d'accrochage @@ -472,12 +473,12 @@ Draft_Snap_Angle - + Angles Angles - + Snaps to 45 and 90 degrees points on arcs and circles Aimante à 45 et 90 degrés des points sur les arcs et les cercles @@ -485,12 +486,12 @@ Draft_Snap_Center - + Center Centre - + Snaps to center of circles and arcs Aimante au centre des cercles et des arcs @@ -498,12 +499,12 @@ Draft_Snap_Dimensions - + Dimensions Dimensions - + Shows temporary dimensions when snapping to Arch objects Indique les dimensions provisoires lors de l'aimantation aux objets Arc @@ -511,12 +512,12 @@ Draft_Snap_Endpoint - + Endpoint Terminaison - + Snaps to endpoints of edges S'accroche aux extrémités des lignes @@ -524,12 +525,12 @@ Draft_Snap_Extension - + Extension Extension - + Snaps to extension of edges S'accroche sur le prolongement des lignes @@ -537,12 +538,12 @@ Draft_Snap_Grid - + Grid Grille - + Snaps to grid points S'aimante sur les points de grille @@ -550,12 +551,12 @@ Draft_Snap_Intersection - + Intersection Intersection - + Snaps to edges intersections S'accroche aux intersections de lignes @@ -563,12 +564,12 @@ Draft_Snap_Lock - + Toggle On/Off Activer/désactiver - + Activates/deactivates all snap tools at once Active/désactive tous les outils d'aimantation immédiatement @@ -576,25 +577,25 @@ Draft_Snap_Midpoint - + Midpoint Milieu - + Snaps to midpoints of edges - S'accroche au milieux des arêtes + Aimanter en milieu d'arête Draft_Snap_Near - + Nearest - Le plus proche + Au plus proche - + Snaps to nearest point on edges S'accroche au point le plus proche, sur les bords @@ -602,12 +603,12 @@ Draft_Snap_Ortho - + Ortho Ortho - + Snaps to orthogonal and 45 degrees directions S'accroche aux directions orthogonales ou de 45 degrés @@ -615,12 +616,12 @@ Draft_Snap_Parallel - + Parallel Parallèle - + Snaps to parallel directions of edges S'accroche aux directions parallèles des lignes @@ -628,12 +629,12 @@ Draft_Snap_Perpendicular - + Perpendicular Perpendiculaire - + Snaps to perpendicular points on edges S'accroche aux points perpendiculaires de la ligne @@ -641,12 +642,12 @@ Draft_Snap_WorkingPlane - + Working Plane Plan de travail - + Restricts the snapped point to the current working plane Restreint le point d'accroche au plan de travail actuel @@ -654,12 +655,12 @@ Draft_Text - + Text Texte - + Creates an annotation. CTRL to snap Crée une annotation. CTRL pour accrocher aux objets @@ -667,12 +668,12 @@ Draft_ToggleConstructionMode - + Toggle construcion Mode Bascule en mode construction - + Toggles the Construction Mode for next objects. Bascule en mode construction pour les prochains objets. @@ -680,12 +681,12 @@ Draft_ToggleContinueMode - + Toggle Continue Mode Inverse le mode Continuer - + Toggles the Continue Mode for next commands. Bascule le mode Continu pour les prochaines commandes. @@ -693,12 +694,12 @@ Draft_ToggleDisplayMode - + Toggle display mode Bascule le mode d'affichage - + Swaps display mode of selected objects between wireframe and flatlines Bascule le mode d'affichage des objets sélectionnés entre filaire ou ombré @@ -706,25 +707,25 @@ Draft_ToggleGrid - + Toggle Grid Grille - - Toggles the Draft gid on/off - Active ou désactive la grille + + Toggles the Draft grid on/off + Active/désactive la grille Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Ajuste ou prolonge l'objet sélectionné, ou extrude les faces simples. CTRL active l'accrochage, Maj contraint au segment courant ou à la normale, Alt inverse @@ -732,12 +733,12 @@ Draft_UndoLine - + Undo last segment Annuler le dernier segment - + Undoes the last drawn segment of the line being drawn Annuler le dernier segment de la ligne actuelle @@ -745,25 +746,38 @@ Draft_Upgrade - + Upgrade Mettre à niveau - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces Joint les objets sélectionnés en un seul, ou convertit les lignes fermées en faces, ou unit des faces + + Draft_VisGroup + + + VisGroup + GroupeVisu + + + + Adds a VisGroup + Ajoute un GroupeVisu + + Draft_Wire - + DWire Filaire - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain Crée un filaire à plusieurs points. CTRL pour forcer l'accrochage, MAJ pour contraindre. @@ -771,12 +785,12 @@ Draft_WireToBSpline - + Wire to BSpline Filaire vers BSpline - + Converts between Wire and BSpline Convertit entre filaire et BSpline @@ -804,17 +818,17 @@ la couleur par défaut pour les symboles d'accrochage - + This is the default color for objects being drawn while in construction mode. La couleur par défaut pour les objets en cours de conception en mode construction. - + This is the default group name for construction geometry Le nom du groupe par défaut pour les géométries de construction - + Construction Construction @@ -920,17 +934,17 @@ comme "Arial:Bold" Couleur et la largeur de ligne originales - + if this is checked, paper space objects will be imported too Si cette case est cochée, les objets "paper space" seront importés également - + if this is unchecked, texts/mtexts won't be imported Si cette case n'est pas cochée, les objets Text/Mtext ne seront pas importés - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. Lors de l'exportation des courbes splines au format DXF, ils sont transformés en polylignes. Cette valeur est la longueur maximale de chacun des segments de la polyligne. Si réglée à 0, la spline entière sera alors traitée comme un segment de droite. @@ -956,7 +970,7 @@ de chacun des segments de la polyligne. Si réglée à 0, la spline entière ser Paramètres généraux - + Construction group name Nom du groupe de construction @@ -972,22 +986,22 @@ Values with differences below this value will be treated as same. La valeur utilisée par les fonctions qui utilisent une tolérance. Les valeurs de différence inférieure à cette valeur seront considérées comme identiques. - + DXF format options Options de format DXF - + Check this if you want the non-named blocks (beginning with a *) to be imported too Cochez cette case si vous voulez que les blocs anonymes (dont le nom commence par une *) soient importés - + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... Si cette case est cochée, FreeCAD tentera de joindre les objets coïncidents en filaires. Attention, ceci peut prendre un certain temps... - + Join geometry Joindre la géométrie @@ -1088,32 +1102,32 @@ Si cette option est cochée, les objets de base seront plutôt sélectionnés.Sélectionner les objets de base après la copie - + If checked, a grid will appear when drawing Si cette case est cochée, une grille apparaîtra lors du dessin - + Use grid Activer la grille - + Grid spacing Espacement de la grille - + The spacing between each grid line Espacement entre chaque ligne de la grille - + Main lines every Lignes principales toutes les - + Mainlines will be drawn thicker. Specify here how many squares between mainlines. Les traits de lignes principales seront plus épais. Spécifiez ici le nombre de carreaux entre les lignes principales. @@ -1143,23 +1157,23 @@ Si cette option est cochée, les objets de base seront plutôt sélectionnés.Droit - + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable Si cette case est cochée, les objets partageant les mêmes couches seront réunis en blocs, rendant l'affichage plus rapide, mais ils seront moins facilement modifiables - + Group layers into blocks Grouper les couches dans des blocs - + If this is checked, all objects containing faces will be exported as 3d polyfaces Si cette case est cochée, tous les objets contenant des faces seront exportés comme des objets 3D multi-facettes - + Export 3D objects as polyface meshes Exporter des objets 3D comme des maillages multi-facettes @@ -1199,37 +1213,37 @@ plus rapide, mais ils seront moins facilement modifiables Afficher le marqueur de plan de travail - + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command Si coché, la grille s'affichera toujours lorsque l'établi Draft est actif. Sinon, uniquement en effectuant une commande - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document Si coché, les textes importés auront la taille par défaut du module Draft, au lieu de leur taille dans le document DXF - + Use standard font size for texts Utiliser la taille de police standard pour les textes - + If this is checked, hatches will be converted into simple wires Si coché, les hachures seront converties en filaires simples - + Import hatch boundaries as wires Importation des contours de hachures comme filaires - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width Si cette case est cochée, lorsque les polylignes ont une épaisseur définie, elles seront rendues comme filaires fermés, dont la largeur sera l'épaisseur de la polyligne - + Render polylines with width Rendre les polylignes avec leur épaisseur @@ -1284,67 +1298,67 @@ plus rapide, mais ils seront moins facilement modifiables Toujours aimanté (désactiver le mode aimantation) - + Construction geometry Géométrie de construction - + Construction geometry color Couleur de la géométrie de construction - + Import Importation - + texts and dimensions textes et dimensions - + points points - + layouts mises en page - + *blocks *blocs - + If this is checked, the exported objects will be projected to reflect the current view direction Si cette case est cochée, les objets seront projetées comme la vue actuelle - + Project exported objects along current view direction projeté les objets suivant la direction de la vue actuelle - + Ellipse export is badly supported. Use this to export them as polylines instead. l'export d'ellipse est mal supporté. Utilisé plutôt l'export en tant que polyligne. - + DWG format options Options du format DWG - + Path to Teigha File Converter Chemin d'accès du convertisseur de fichier Teigha - + The path to your Teigha File Converter executable Le chemin vers l'exécutable du convertisseur de fichier Teigha @@ -1399,7 +1413,7 @@ plus rapide, mais ils seront moins facilement modifiables Grille - + Always show the grid Toujours afficher la grille @@ -1429,52 +1443,37 @@ plus rapide, mais ils seront moins facilement modifiables taille - + Dimensions arrows Dimensions des flèches - + style style - + Dot point - + Circle Cercle - + Arrow flèche - + The default size of arrows taille des flèches par défaut - - Dimensions lines - Lignes de cotes - - - - text above - texte ci-dessus - - - - text inside - texte à l'intérieur - - - + The default size of dimensions extension lines La taille par défaut des extensions des lignes de cote @@ -1514,80 +1513,55 @@ plus rapide, mais ils seront moins facilement modifiables Remplir des objets avec des faces si possible - - DXF / DWG options - Option DXF/DWG - - - + Create Créer - - If thi sis checked, only standard Part objects will be created (fastest) - Si coché, seul les objects standard seront créés (plus rapide) - - - + simple Part shapes Object de forme simple - + If this is checked, parametric Draft objects will be created whenever possible Si cette case est cochée, les objets paramétriques du projet seront créés lorsque cela est possible - + Draft objects Objets Draft - + If this is checked, sketches will be created whenever possible Si cette case est cochée, des esquisses seront créés à chaque fois que se sera possible - + Sketches Esquisses - + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. Si cette case est cochée, les couleurs seront extraites des objets DXF lorsque cela est possible. Sinon les couleurs par défaut seront appliquées. - + Get original colors from the DXF file Obtenez les couleurs d'origine du fichier DXF - - If this is checked, DXF layers will be imported as Draft layers - Si cette case est cochée, les calques DXF seront importés sous forme de calques de projet - - - - Use Draft Layers - Utilisez des calques de projet - - - + Treat ellipses and splines as polylines Traiter les ellipses et les splines comme polylignes - + Max Spline Segment: Qte max de segments : - - - SVG / OCA options - Options SVG / OCA - Export style @@ -1603,21 +1577,146 @@ plus rapide, mais ils seront moins facilement modifiables Show the unit suffix in dimensions Afficher le suffixe de l'unité aux dimensions + + + DXF / DWG + DXF / DWG + + + + Automatic update + Mise à jour automatique + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + <html><head/> <body><p>En cochant cette case, vous permettrez à FreeCAD de télécharger et mettre à jour les</p> <p>composants nécessaires pour l'importation et l'exportation de DXF. Vous pouvez aussi le faire</p> <p>manuellement, en visitant https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + + + + Allow FreeCAD to automatically download and update the DXF libraries + Permettre à FreeCAD de télécharger et mettre à jour automatiquement les librairies DXF + + + + If this is checked, only standard Part objects will be created (fastest) + Si cette case est cochée, seuls des objets Pièce standards seront créés (plus rapide) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + Si cette case est cochée, les calques DXF seront importés comme objet GroupeVisu + + + + Use VisGroups + Utiliser GroupeVisu + + + + mm + mm + + + + SVG / OCA + SVG / OCA + + + + Grid size + Taille de la grille + + + + the number of horizontal or vertical lines of the grid + le nombre de lignes horizontales et verticales de la grille + + + + lines + lignes + + + + Dimensions + Dimensions + + + + display mode + mode d'affichage + + + + text above (2D) + texte ci-dessus (2D) + + + + text inside (3D) + texte à l'intérieur (3D) + + + + extension lines size + taille des lignes d'extension + + + + Drawing views + Vues de mise en plan + + + + Dashed line definition + Définition de la ligne en pointillés + + + + A SVG linestyle definition + Une définition de style de ligne SVG + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + Définition de ligne de Point-tiret + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Définition de la ligne pointillée + + + + 0.02,0.02 + 0.02,0.02 + Workbench - + Draft Snap Accroche Draft - + Draft creation tools Outils de création de Draft - + Draft modification tools Outils de modification de Draft @@ -1625,651 +1724,611 @@ plus rapide, mais ils seront moins facilement modifiables draft - + Draft Command Bar Barre de commandes Draft - + active command: commande active : - + None Aucun - + Active Draft command Commande active - + X coordinate of next point Coordonnée X du prochain point - + X X - + Y Y - + Z Z - + Y coordinate of next point Coordonnée Y du prochain point - + Z coordinate of next point Coordonnée Z du prochain point - + Radius Rayon - + Radius of Circle Rayon du cercle - + &Relative R&elatif - + Coordinates relative to last point or absolute (SPACE) Coordonnées relatives au dernier point (BARRE D'ESPACE) - + F&illed Rempl&i - + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) Cocher pour remplir l'objet, sinon il sera affiché en mode filaire (i) - + &Finish &Terminer - + Finishes the current drawing or editing operation (F) Termine le dessin en cours ou l'édition (F) - + If checked, command will not finish until you press the command button again Si cette case est cochée, la commande ne se terminera que si vous appuyez à nouveau sur son icône - - &Continue - &Continuer - - - + If checked, an OCC-style offset will be performed instead of the classic offset Si coché, un décalage de type OCC sera effectué au lieu du décalage classique - + &OCC-style offset Décalage de type &OCC - + Add points to the current object Ajouter des points à l'objet actuel - + Remove points from the current object Supprimer des points de l'objet actuel - + Make Bezier node sharp rendre les noeuds de Bezier angulaire - + Make Bezier node tangent Continuité en tangence - + Make Bezier node symmetric Tangence symétrique sur les sommet de courbes de bezier - + &Undo &Annuler - + Undo the last segment (CTRL+Z) Annuler le dernier segment (CTRL+Z) - + &Close &Fermer - + Finishes and closes the current line (C) Terminer et fermer la ligne actuelle (C) - + &Wipe &Effacer - + Wipes the existing segments of this line and starts again from the last point (W) Efface les segments existants de cette ligne et recommence depuis le dernier point (W) - + Number of sides Nombre de côtés - + Offset Décalage - + XY XY - + Select XY plane Sélectionner le plan XY - + XZ XZ - + Select XZ plane Sélectionner le plan XZ - + YZ YZ - + Select YZ plane Sélectionner le plan YZ - + View Vue - + Select plane perpendicular to the current view Sélectionner le plan perpendiculaire à l'axe de la vue actuelle - + Do not project points to a drawing plane Ne pas projeter les points sur un plan de dessin - + &Copy &Copier - + If checked, objects will be copied instead of moved (C) Si cette option est cochée, les objets seront copiés au lieu d'être déplacés (C) - + Text string to draw Chaîne de texte à dessiner - + String Chaîne - + Height of text Hauteur du texte - + Height Hauteur - + Intercharacter spacing Espacement entre les caractères - + Tracking Crénage - + Full path to font file: Chemin d'accès complet au fichier de police : - + Open a FileChooser for font file Ouvre une boîte de dialogue pour choisir le fichier de police - + Set/unset a working plane Active/désactive un plan de travail - + Line Color Couleur de ligne - + Face Color Couleur de face - + Line Width Largeur de ligne - + Font Size Taille de police - + Apply to selected objects Appliquer aux objets sélectionnés - + Toggles Construction Mode Activer/désactiver le mode Construction - + Select Plane Sélectionner un plan de travail - + Line Ligne - + DWire Filaire - + Circle Cercle - + Center X Centre X - + Arc Arc - + Point Point - + Distance Distance - + Trim Ajuster - + Pick Object Choisir un objet - + Edit Éditer - + Global X X global - + Global Y Y global - + Global Z Z global - + Local X X local - + Local Y Y local - + Local Z Z local - + Invalid Size value. Using 200.0. Valeur de taille non valide. Utilisation de 200,0. - + Invalid Tracking value. Using 0. Valeur non valide de crénage. Utilisation de 0. - + Please enter a text string. Veuillez entrer une chaîne de texte. - + Select a Font file Sélectionnez un fichier de police - + Please enter a font file. Veuillez entrer un fichier de police s'il vous plaît - + Draft.makeBSpline: not enough points Draft.makeBSpline : pas assez de points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline : Les derniers points sont égaux. Fermeture forcé - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline : Liste de points non valide - + Found groups: closing each open object inside Groupes trouvés : fermeture de chaque objet à l'intérieur - + Found mesh(es): turning into Part shapes Maillage(s) trouvés : transformer en formes - + Found 1 solidificable object: solidifying it Création d'un solide à partir d'un objet trouvé - + Found 2 objects: fusing them Fusion de deux objets trouvés - - Found several objects: making a shell - - Plusieurs objets trouvés : faire une enveloppe - - - - - Found several coplanar objects or faces: making one face - - Plusieurs objets ou face coplanaires trouvés : faire une face - - - - + Found 1 non-parametric objects: draftifying it Paramétrisation d'un objet non-paramétrique trouvé - - Found 1 closed sketch object: making a face from it - - Création d'une face à partir d'un objet de croquis fermé - - - - - Found closed wires: making faces - - Ligne de contour fermé trouvées : faire des faces - - - - + Found 1 open wire: closing it Clôture d'un filaire ouvert trouvé - + Found several open wires: joining them Plusieurs contour ouvert trouvés : les joindre - + Found several edges: wiring them Création d'un filaire à partir de plusieurs arêtes trouvées - - Found several non-treatable objects: making compound - - Création d'un composé à partir de plusieurs objets non traitables trouvés - - - - + Unable to upgrade these objects. Impossible de mettre à jour ces objets. - + Found 1 block: exploding it 1 bloc trouvé : explosé le - + Found 1 parametric object: breaking its dependencies 1 objet paramétrique trouvé: rupture de ses dépendances - + Found 2 objects: subtracting them Soustraction de deux objets trouvés - + Found several faces: splitting them Séparation en faces simples de plusieurs faces trouvées - + Found several objects: subtracting them from the first one Plusieurs objets trouvés : soustraction à partir du premier - + Found 1 face: extracting its wires 1 face trouvée : extraction de son filaire - + Found only wires: extracting their edges Filaires trouvés: extraction de leurs arêtes - + No more downgrade possible Impossible de déclasser davantage - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry : fermé avec le même premier/dernier Point. Géométrie non mis à jour. - + Pick a face to define the drawing plane Sélectionnez une face pour définir un plan de travail - + Pick first point: Indiquez le premier point : - + Create Line Créer une ligne - + Create DWire Créer un filaire - + DWire has been closed Le filaire a été fermé - + Last point has been removed Le dernier point a été supprimé - + Pick next point: Indiquez le point suivant : - + Pick next point, or (F)inish or (C)lose: Indiquez le point suivant ou terminer (F) ou fermer (C) : - + BSpline BSpline @@ -2281,7 +2340,7 @@ plus rapide, mais ils seront moins facilement modifiables - + Create BSpline Créer une courbe BSpline @@ -2291,374 +2350,367 @@ plus rapide, mais ils seront moins facilement modifiables Courbe de Bézier - + Bezier curve has been closed Courbe de Bézier fermée - + Create BezCurve Créer une courbe de Bézier - + Rectangle Rectangle - + Create Plane Créer un plan - + Create Rectangle Créer un rectangle - + Pick opposite point: Indiquez le point opposé : - + Pick center point: Indiquez le centre : - + Pick radius: Indiquez le rayon : - + Pick start angle: Indiquez l'angle de départ : - + Pick aperture: Choisissez l'ouverture : - + Create Circle Créer un cercle - + Create Arc Créer un arc - + Start Angle Angle de départ - + Aperture Ouverture - + Aperture angle: Angle d'ouverture : - + Polygon Polygone - + Create Polygon Créer un polygone - + Ellipse Ellipse - + Create Ellipse Créer une ellipse - + Text Texte - + Pick location point: Indiquez le point de localisation : - + Create Text Créer un texte - + Dimension Cote - + Create Dimension Créer une cote - + Edges don't intersect! Les arêtes ne se croisent pas ! - + ShapeString Texte surfacique - + Pick ShapeString location point: Choisir l'emplacement du point de ShapeString : - + Create ShapeString Créer ShapeString - + Move Déplacer - + Select an object to move Sélectionnez un objet à déplacer - + Pick start point: Indiquez le point de départ : - + Copy Copie - + Pick end point: Indiquez le point final : - + Change Style Changement de style - + Select an object to rotate Sélectionnez un objet à faire pivoter - + Pick rotation center: Choisissez le centre de rotation : - + Rotate Pivoter - + Pick base angle: Choisissez l'angle de base : - + Pick rotation angle: Choisissez l'angle de rotation : - + Select an object to offset Sélectionnez un objet à décaler - + Offset only works on one object at a time Le décalage ne fonctionne que pour un seul objet à la fois - + Cannot offset this object type Impossible de réaliser un décalage sur ce type d'objet - + Pick distance: Choisissez la distance : - + Select an object to upgrade Sélectionnez un objet à mettre à niveau - + Upgrade Mettre à niveau - + Downgrade Rétrograder - - Select an object to trim/extend - - Sélectionnez un objet à ajouter/prolonger - - - - + Scale Échelle - + Select an object to scale Sélectionner un objet à mettre à l'échelle - + Pick base point: Indiquez un point de base : - + Pick scale factor: Indiquez un facteur d'échelle : - + Select an object to project Sélectionnez un objet à projeter - + Select a Draft object to edit Sélectionnez un objet Draft à modifier - + This object type is not editable Ce type d'objet n'est pas modifiable - + Active object must have more than two points/nodes Un objet actif doit avoir plus de deux points/nœuds - + Selection is not a Knot La sélection n'est pas un noeud - + Endpoint of BezCurve can't be smoothed Le point final de la courbe de Bezier ne peut pas être lissé - + Select an object to convert Sélectionnez un objet à convertir - + Select an object to array sélectionner un objet a recopier - + Please select base and path objects SVP sélectionnez un objet de base et un chemin - + Create Point Créer un point - + Select an object to clone Sélectionnez un objet à cloner - + Select face(s) on existing object(s) Sélectionnez la ou les face(s) sur des objets existants @@ -2671,41 +2723,211 @@ plus rapide, mais ils seront moins facilement modifiables - - Installed Macros - Macros installées - - - + &Draft &Draft - + Utilities Utilitaires - + Wire tools Outils de filaires - + Snapping Accroche - + Found 1 multi-solids compound: exploding it un solide multi-composant a été trouvé : dissocier le - + Sides Côtés + + + BSplines and Bezier curves are not supported by this tool + Courbes de Bézier et BSplines ne sont pas pris en charge par cet outil + + + + The given object is not planar and cannot be converted into a sketch. + L'objet donné n'est pas plan et ne peut pas être converti en esquisse. + + + + Found several objects: creating a shell + + Plusieurs objets trouvés : création d'une coque + + + + + Found several coplanar objects or faces: creating one face + + Plusieurs objets ou face coplanaires trouvés : création d'une face + + + + + Found 1 linear object: converting to line + + 1 objet linéaire trouvé : conversion en ligne + + + + + Found 1 closed sketch object: creating a face from it + + 1 esquisse fermé trouvé : création d'une face avec + + + + + Found closed wires: creating faces + + Filaires fermés trouvés : création de faces + + + + + Found several non-treatable objects: creating compound + + Plusieurs objets non traitable trouvés : création d'un composé + + + + + Length + Longueur + + + + Angle + Angle + + + + Length of current segment + Longueur du segment actuel + + + + Angle of current segment + Angle du segment actuel + + + + Check this to lock the current angle (l) + Cochez cette case pour verrouiller l'angle actuel (l) + + + + Con&tinue + Continuer + + + + &Select edge + Sélectionner Arêt&Es + + + + Selects an existing edge to be measured by this dimension (E) + Sélectionne une arête existante pour être mesurées par cette dimension (E) + + + + Auto + Auto + + + + Sorry, offset of Bezier curves is currently still not supported + + Désolé, le décalage des courbes de Bézier n'est toujours pas pris en charge + + + + + Convert to Sketch + Convertir en Esquisse + + + + Convert to Draft + Convertir en Ébauche + + + + Convert + Convertir + + + + Array + Réseau + + + + Select object(s) to trim/extend + + Sélectionnez le ou les objets à réduire/prolonger + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + Impossible de couper ces objets, seuls les objets Draft filaires et arcs sont supportés + + + + + Unable to trim these objects, too many wires + + Impossible de couper ces objets, trop de filaires + + + + + These objects don't intersect + + Ces objets ne se croisent pas + + + + + Too many intersection points + + Trop de points d'intersection + + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + Les bibliothèques d'import/export DXF nécessaires à FreeCAD pour manipuler le format DXF n'ont pas été trouvé sur ce système. +Merci d'autoriser FreeCAD à télécharger ces bibliothèques : + 1 - Charger l'atelier Draft + 2 - Menu Edition > Préférences > Import-Export > DXF > Autoriser le téléchargement +Ou alors, télécharger ces bibliothèques manuellement, comme expliqué sur +https://github.com/yorikvanhavre/Draft-dxf-importer + diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.qm b/src/Mod/Draft/Resources/translations/Draft_hr.qm index b7af65e50d..1c019aab8c 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_hr.qm and b/src/Mod/Draft/Resources/translations/Draft_hr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.ts b/src/Mod/Draft/Resources/translations/Draft_hr.ts index f82b12120b..9d74367fa1 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hr.ts @@ -1,15 +1,29 @@ + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + + Draft_AddPoint - + Add Point Dodaj točku - + Adds a point to an existing wire/bspline Dodaje vrh na postojeću žicu/krivulju @@ -17,12 +31,12 @@ Draft_AddToGroup - + Add to group... Dodaj u grupu... - + Adds the selected object(s) to an existing group Dodaje odabrane objekt(e) u postojeću grupu @@ -30,12 +44,12 @@ Draft_ApplyStyle - + Apply Current Style Primijeni trenutni stil - + Applies current line width and color to selected objects Primjenjuje trenutnu širinu linije i boju na odabrane objekte @@ -43,12 +57,12 @@ Draft_Arc - + Arc Luk - + Creates an arc. CTRL to snap, SHIFT to constrain Stvara luk. CTRL za uhvatiti, SHIFT da bi ograničili @@ -56,12 +70,12 @@ Draft_Array - + Array Polje - + Creates a polar or rectangular array from a selected object Multiplicira selektirane objekte u pravokutno ili polarno polje @@ -69,12 +83,12 @@ Draft_BSpline - + B-Spline B-spline - + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain Stvara krivulju sa više točaka. CTRL za uhvatiti, SHIFT na ograničiti pomicanje @@ -95,12 +109,12 @@ Draft_Circle - + Circle Krug - + Creates a circle. CTRL to snap, ALT to select tangent objects Stvara krug. CTRL za uhvatiti, ALT za odabir objekta na tangenti @@ -108,12 +122,12 @@ Draft_Clone - + Clone Klon - + Clones the selected object(s) Klonira selektirane objekte @@ -121,12 +135,12 @@ Draft_CloseLine - + Close Line Zatvori liniju - + Closes the line being drawn Zatvara se nacrtana linija @@ -134,12 +148,12 @@ Draft_DelPoint - + Remove Point Ukloni točku - + Removes a point from an existing wire or bspline Uklanja točku iz postojeće žice ili krivulje @@ -147,12 +161,12 @@ Draft_Dimension - + Dimension Dimenzija - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Stvara dimenziju. CTRL za uhvatiti, SHIFT za ograničavanje pomaka, ALT za odabir segmenta @@ -160,12 +174,12 @@ Draft_Downgrade - + Downgrade Razbiti - + Explodes the selected objects into simpler objects, or subtract faces Razbija odabrane objekte u jednostavnije, ili oduzima površine @@ -173,7 +187,7 @@ Draft_Draft2Sketch - + Draft to Sketch Nacrt u skicu @@ -181,12 +195,12 @@ Draft_Drawing - + Drawing Crtež - + Puts the selected objects on a Drawing sheet. Stavlja odabrani objekt na list. @@ -194,12 +208,12 @@ Draft_Edit - + Edit Uredi - + Edits the active object Uređivanje aktivnog objekta @@ -207,12 +221,12 @@ Draft_Ellipse - + Ellipse Elipsa - + Creates an ellipse. CTRL to snap Creates an ellipse. CTRL to snap @@ -220,12 +234,12 @@ Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) Creates a facebinder object from selected face(s) @@ -233,12 +247,12 @@ Draft_FinishLine - + Finish line Završi liniju - + Finishes a line without closing it Završava linija bez zatvaranja @@ -246,12 +260,12 @@ Draft_FlipDimension - + Flip Dimension Flip Dimension - + Flip the normal direction of a dimension Flip the normal direction of a dimension @@ -259,38 +273,25 @@ Draft_Heal - + Heal Heal - - Heal faultly Draft objects saved from an earlier FreeCAD version - Heal faultly Draft objects saved from an earlier FreeCAD version - - - - Draft_Layer - - - Layer - Layer - - - - Adds a layer - Adds a layer + + Heal faulty Draft objects saved from an earlier FreeCAD version + Heal faulty Draft objects saved from an earlier FreeCAD version Draft_Line - + Line Linija - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Stvara liniju pomoću dvije točke. CTRL za uhvatiti, SHIFT za ograničiti postavljanje @@ -298,12 +299,12 @@ Draft_Move - + Move Pomicanje - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy Premještanje odabranih objekata između 2 točke. CTRL za uhvatiti, SHIFT za ograničiti pomicanje, ALT za kopiranje @@ -311,12 +312,12 @@ Draft_Offset - + Offset Pomak - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Pomiče aktivni objekt. CTRL za uhvatiti, SHIFT za ograničiti pomicanje, ALT za kopiranje @@ -324,12 +325,12 @@ Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. Creates copies of a selected object along a selected path. @@ -337,12 +338,12 @@ Draft_Point - + Point Točka - + Creates a point object Kreira točku @@ -350,12 +351,12 @@ Draft_Polygon - + Polygon Poligon - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Stvara Poligon. CTRL za uhvatiti, SHIFT za ograničiti pomicanje @@ -363,12 +364,12 @@ Draft_Rectangle - + Rectangle Pravokutnik - + Creates a 2-point rectangle. CTRL to snap Stvara pravokutnik pomoću 2 nasuprotna vrha. CTRL za uhvatiti @@ -376,12 +377,12 @@ Draft_Rotate - + Rotate Rotiraj - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Rotira odabrane objekte. CTRL za uhvatiti, SHIFT za ograničiti pomicanje, ALT za kopiranje @@ -389,12 +390,12 @@ Draft_Scale - + Scale Skaliraj - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Skalira odabrane objekte iz osnovne točke. CTRL za uhvatiti, SHIFT za ograničiti pomicanje, ALT za kopiranje @@ -402,12 +403,12 @@ Draft_SelectGroup - + Select group Odaberi grupu - + Selects all objects with the same parents as this group Odabire sve objekte s istim roditeljima koje ima ova grupa @@ -415,12 +416,12 @@ Draft_SelectPlane - + SelectPlane OdaberiteRavninu - + Select a working plane for geometry creation Odaberite ravninu za rad @@ -428,17 +429,17 @@ Draft_Shape2DView - + Shape 2D view 2D prikaz oblika - + Creates Shape 2D views of selected objects Stvara 2D pogled odabranih objekata - + Convert bidirectionally between Draft and Sketch objects Bidirekcionalno konvertiraj između Nacrta i Skice @@ -446,12 +447,12 @@ Draft_ShapeString - + Shape from text... Shape from text... - + Creates text string in shapes. Creates text string in shapes. @@ -459,12 +460,12 @@ Draft_ShowSnapBar - + Show Snap Bar Prikaži Alatnu traku za hvatanje - + Shows Draft snap toolbar Prikaži Draft snap alat @@ -472,12 +473,12 @@ Draft_Snap_Angle - + Angles Angles - + Snaps to 45 and 90 degrees points on arcs and circles Snaps to 45 and 90 degrees points on arcs and circles @@ -485,12 +486,12 @@ Draft_Snap_Center - + Center Center - + Snaps to center of circles and arcs Snaps to center of circles and arcs @@ -498,12 +499,12 @@ Draft_Snap_Dimensions - + Dimensions Dimenzije - + Shows temporary dimensions when snapping to Arch objects Shows temporary dimensions when snapping to Arch objects @@ -511,12 +512,12 @@ Draft_Snap_Endpoint - + Endpoint Endpoint - + Snaps to endpoints of edges Snaps to endpoints of edges @@ -524,12 +525,12 @@ Draft_Snap_Extension - + Extension Extension - + Snaps to extension of edges Snaps to extension of edges @@ -537,12 +538,12 @@ Draft_Snap_Grid - + Grid Grid - + Snaps to grid points Snaps to grid points @@ -550,12 +551,12 @@ Draft_Snap_Intersection - + Intersection Presjek - + Snaps to edges intersections Snaps to edges intersections @@ -563,12 +564,12 @@ Draft_Snap_Lock - + Toggle On/Off Toggle On/Off - + Activates/deactivates all snap tools at once Activates/deactivates all snap tools at once @@ -576,12 +577,12 @@ Draft_Snap_Midpoint - + Midpoint Midpoint - + Snaps to midpoints of edges Snaps to midpoints of edges @@ -589,12 +590,12 @@ Draft_Snap_Near - + Nearest Nearest - + Snaps to nearest point on edges Snaps to nearest point on edges @@ -602,12 +603,12 @@ Draft_Snap_Ortho - + Ortho Ortho - + Snaps to orthogonal and 45 degrees directions Snaps to orthogonal and 45 degrees directions @@ -615,12 +616,12 @@ Draft_Snap_Parallel - + Parallel Parallel - + Snaps to parallel directions of edges Snaps to parallel directions of edges @@ -628,12 +629,12 @@ Draft_Snap_Perpendicular - + Perpendicular Perpendicular - + Snaps to perpendicular points on edges Snaps to perpendicular points on edges @@ -641,12 +642,12 @@ Draft_Snap_WorkingPlane - + Working Plane Working Plane - + Restricts the snapped point to the current working plane Restricts the snapped point to the current working plane @@ -654,12 +655,12 @@ Draft_Text - + Text Tekst - + Creates an annotation. CTRL to snap Stvara komentar. CTRL za uhvatiti @@ -667,12 +668,12 @@ Draft_ToggleConstructionMode - + Toggle construcion Mode Uključi/Isključi mod izgradnje - + Toggles the Construction Mode for next objects. Uključuje/isključuje mod izgradnje za sljedeće objekte. @@ -680,12 +681,12 @@ Draft_ToggleContinueMode - + Toggle Continue Mode Toggle Continue Mode - + Toggles the Continue Mode for next commands. Uključuje način nastavljanja za sljedeće naredbe. @@ -693,12 +694,12 @@ Draft_ToggleDisplayMode - + Toggle display mode Promjeni način prikaza - + Swaps display mode of selected objects between wireframe and flatlines Zamjenjuje način prikaza odabranih objekata između "Samo žice" i "Ravne linije" @@ -706,25 +707,25 @@ Draft_ToggleGrid - + Toggle Grid Uključi/isključi rešetku - - Toggles the Draft gid on/off - Mjenja stanje rešetke u Nacrtu + + Toggles the Draft grid on/off + Toggles the Draft grid on/off Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Skraćuje ili produžuje odabrani objekt ili izvlači površine. CTRL za ograničiti, SHIFT ograničava izvlačenje po normali, ALT invertira @@ -732,12 +733,12 @@ Draft_UndoLine - + Undo last segment Poništi posljednji segment - + Undoes the last drawn segment of the line being drawn Poništava posljednji nacrtani segment polilinije koja se postavlja @@ -745,25 +746,38 @@ Draft_Upgrade - + Upgrade Nadogradnja - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces Spaja odabranie objekte u jedan, ili pretvara zatvorenu žicu u površinu, ili ujedininjuje površine + + Draft_VisGroup + + + VisGroup + VisGroup + + + + Adds a VisGroup + Adds a VisGroup + + Draft_Wire - + DWire DWire - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain Kreira Žicu nacrta (DWire). CTRL za hvatanje, SHIFT za ograničavanje @@ -771,12 +785,12 @@ Draft_WireToBSpline - + Wire to BSpline Žica u krivulju - + Converts between Wire and BSpline Izmjena između žice i krivulje @@ -804,17 +818,17 @@ Inicijalna boja simbola za uhvatiti - + This is the default color for objects being drawn while in construction mode. Ovo je zadana boja za objekte koji se izrađuju u modu izgradnje. - + This is the default group name for construction geometry Ovo je zadani naziv grupe za izgradnju geometrije - + Construction Izgradnja @@ -920,17 +934,17 @@ kao što su "Arial:Bold" Izvorna boja i širina linije - + if this is checked, paper space objects will be imported too ako ovo označeno, objekti lista će također biti učitani - + if this is unchecked, texts/mtexts won't be imported ako je označeno, text/mtext neće biti učitan - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. Prilikom izvoza krivulja u DXF, oni su pretvoreni u polilinije. Ovo je maksimalna duljina svake od polilinija segmenata. Ako je 0, cijela će se krivulja tretira kao ravni segment. @@ -955,7 +969,7 @@ kao što su "Arial:Bold" Glavne postavke - + Construction group name Ime grupe konstrukcije @@ -972,22 +986,22 @@ Values with differences below this value will be treated as same. Vrijednosti s razlikama ispod te vrijednosti će biti tretirane kao jednake. - + DXF format options DXF opcije - + Check this if you want the non-named blocks (beginning with a *) to be imported too Označite ovo ako želite da neimenovani blokovi (počevši s *) se mogu učitati - + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... Ako je označeno, FreeCAD će pokušati spojiti spojene linije u žice. Pazite, ovo može potrajati neko vrijeme ... - + Join geometry Pridružite geometriju @@ -1087,32 +1101,32 @@ Vrijednosti s razlikama ispod te vrijednosti će biti tretirane kao jednake.Odaberite bazu objekata nakon kopiranja - + If checked, a grid will appear when drawing Ako je označeno, rešetka će se pojaviti prilikom crtanja - + Use grid Koristi rešetku - + Grid spacing Veličina rešetke - + The spacing between each grid line Razmak između linija na rešetki - + Main lines every Glavne linije svakih - + Mainlines will be drawn thicker. Specify here how many squares between mainlines. Glavne linije će biti deblje crtane. Ovdje postaviti koliko kvadrata je među njima. @@ -1142,22 +1156,22 @@ Vrijednosti s razlikama ispod te vrijednosti će biti tretirane kao jednake.Desno - + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable ako je ovo uključeno, objekti iz istog sloja će se ujediniti u blokove, pa će okretanje zaslona biti brže, ali će se objekti teže uređivati - + Group layers into blocks Grupiranje slojeva u blokove - + If this is checked, all objects containing faces will be exported as 3d polyfaces Ako je to označeno, svi objekti koji sadrže plohe će se izvesti kao 3D polyface mreže - + Export 3D objects as polyface meshes Izvoz 3D objekata kao polyface mreže @@ -1197,37 +1211,37 @@ Vrijednosti s razlikama ispod te vrijednosti će biti tretirane kao jednake.Prikaži tragač radne površine - + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command Ako je uključeno, rešetka će uvijek biti prikazana kada je Draft okruženje aktivno. Inače samo kada se koristi naredba - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document Ako je ovov uključeno, uvezeni će tekst koristiti standardnu veličinu definiranu u Draft okruženju, umjesto one definirane u DXF dokumentu - + Use standard font size for texts Koristi standardnu veličinu fonta za tekst - + If this is checked, hatches will be converted into simple wires Ako je ovo označeno, otvori će biti prevedeni u žice - + Import hatch boundaries as wires očitaj krajeve otvora kao žice - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width Ako je ovo označeno, kada polilinije imaju definiranu debljinu, biti će prikazane kao zatvorene žice sa točnom debljinom - + Render polylines with width Renderiraj polilinije sa debljinom @@ -1282,67 +1296,67 @@ Vrijednosti s razlikama ispod te vrijednosti će biti tretirane kao jednake.Always snap (disable snap mod) - + Construction geometry Geometrija za konstrukciju - + Construction geometry color Construction geometry color - + Import Import - + texts and dimensions texts and dimensions - + points points - + layouts layouts - + *blocks *blocks - + If this is checked, the exported objects will be projected to reflect the current view direction If this is checked, the exported objects will be projected to reflect the current view direction - + Project exported objects along current view direction Project exported objects along current view direction - + Ellipse export is badly supported. Use this to export them as polylines instead. Ellipse export is badly supported. Use this to export them as polylines instead. - + DWG format options DWG format options - + Path to Teigha File Converter Path to Teigha File Converter - + The path to your Teigha File Converter executable The path to your Teigha File Converter executable @@ -1397,7 +1411,7 @@ Vrijednosti s razlikama ispod te vrijednosti će biti tretirane kao jednake.Grid - + Always show the grid Always show the grid @@ -1427,52 +1441,37 @@ Vrijednosti s razlikama ispod te vrijednosti će biti tretirane kao jednake.size - + Dimensions arrows Dimensions arrows - + style style - + Dot Dot - + Circle Krug - + Arrow Arrow - + The default size of arrows The default size of arrows - - Dimensions lines - Dimensions lines - - - - text above - text above - - - - text inside - text inside - - - + The default size of dimensions extension lines The default size of dimensions extension lines @@ -1512,80 +1511,55 @@ Vrijednosti s razlikama ispod te vrijednosti će biti tretirane kao jednake.Fill objects with faces whenever possible - - DXF / DWG options - DXF / DWG options - - - + Create Stvoriti - - If thi sis checked, only standard Part objects will be created (fastest) - If thi sis checked, only standard Part objects will be created (fastest) - - - + simple Part shapes simple Part shapes - + If this is checked, parametric Draft objects will be created whenever possible If this is checked, parametric Draft objects will be created whenever possible - + Draft objects Draft objects - + If this is checked, sketches will be created whenever possible If this is checked, sketches will be created whenever possible - + Sketches Sketches - + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. - + Get original colors from the DXF file Get original colors from the DXF file - - If this is checked, DXF layers will be imported as Draft layers - If this is checked, DXF layers will be imported as Draft layers - - - - Use Draft Layers - Use Draft Layers - - - + Treat ellipses and splines as polylines Treat ellipses and splines as polylines - + Max Spline Segment: Max Spline Segment: - - - SVG / OCA options - SVG / OCA options - Export style @@ -1601,21 +1575,146 @@ Vrijednosti s razlikama ispod te vrijednosti će biti tretirane kao jednake.Show the unit suffix in dimensions Show the unit suffix in dimensions + + + DXF / DWG + DXF / DWG + + + + Automatic update + Automatic update + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + + + + Allow FreeCAD to automatically download and update the DXF libraries + Allow FreeCAD to automatically download and update the DXF libraries + + + + If this is checked, only standard Part objects will be created (fastest) + If this is checked, only standard Part objects will be created (fastest) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + If this is checked, DXF layers will be imported as Draft VisGroups + + + + Use VisGroups + Use VisGroups + + + + mm + mm + + + + SVG / OCA + SVG / OCA + + + + Grid size + Grid size + + + + the number of horizontal or vertical lines of the grid + the number of horizontal or vertical lines of the grid + + + + lines + lines + + + + Dimensions + Dimenzije + + + + display mode + display mode + + + + text above (2D) + text above (2D) + + + + text inside (3D) + text inside (3D) + + + + extension lines size + extension lines size + + + + Drawing views + Drawing views + + + + Dashed line definition + Dashed line definition + + + + A SVG linestyle definition + A SVG linestyle definition + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + Dashdot line definition + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Dotted line definition + + + + 0.02,0.02 + 0.02,0.02 + Workbench - + Draft Snap Draft Snap - + Draft creation tools Alati za kreiranje nacrta - + Draft modification tools Alati za modifikaciju nacrta @@ -1623,635 +1722,597 @@ Vrijednosti s razlikama ispod te vrijednosti će biti tretirane kao jednake. draft - + Draft Command Bar Draft Command Bar - + active command: aktivna naredba: - + None Prazno - + Active Draft command Aktivna naredbu nacrta - + X coordinate of next point X koordinate sljedeće točke - + X X - + Y Y - + Z Z - + Y coordinate of next point Y koordinate sljedeće točke - + Z coordinate of next point Z koordinate sljedeće točke - + Radius Radijus - + Radius of Circle Radijus kruga - + &Relative &Relativan - + Coordinates relative to last point or absolute (SPACE) Koordinate u odnosu na zadnju točku ili apsolutnu (prostora) - + F&illed I&spunjeno - + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) Označi ako bi se objekt trebao pojaviti kao pun, inače će se pojaviti kao ožičenje(i) - + &Finish &Završi - + Finishes the current drawing or editing operation (F) Završava trenutni crtež ili operaciju (F) - + If checked, command will not finish until you press the command button again Ako je označeno, naredba neće završiti sve dok se ponovno ne pritisnete gumb naredbe - - &Continue - &Nastavi - - - + If checked, an OCC-style offset will be performed instead of the classic offset Ako je označeno, pomak u OCC stilu izvršiti će se umjesto klasičnog pomaka - + &OCC-style offset pomak u &OCC-stilu - + Add points to the current object Dodaj točke trenutnom objektu - + Remove points from the current object Ukloni točke iz trenutnog objekta - + Make Bezier node sharp Make Bezier node sharp - + Make Bezier node tangent Make Bezier node tangent - + Make Bezier node symmetric Make Bezier node symmetric - + &Undo &Poništi - + Undo the last segment (CTRL+Z) Poništi posljednji segment (CTRL + Z) - + &Close &Zatvori - + Finishes and closes the current line (C) Završava i zatvara trenutnu liniju (C) - + &Wipe &Obriši - + Wipes the existing segments of this line and starts again from the last point (W) Briše posljednji segmente ove linije i ponovno počinje od zadnje točke (W) - + Number of sides Broj strana - + Offset Pomak - + XY XY - + Select XY plane Odaberite XY ravninu - + XZ XZ - + Select XZ plane Odaberite XZ ravninu - + YZ YZ - + Select YZ plane Odaberite YZ ravninu - + View Pregled - + Select plane perpendicular to the current view Odaberite ravnini okomito na trenutnom prikazu - + Do not project points to a drawing plane Ne projeciraj točke na crtaču ravninu - + &Copy &Kopiraj - + If checked, objects will be copied instead of moved (C) Ako je označeno, objekti će se kopirati umjesto pomicanja (C) - + Text string to draw Text string to draw - + String Tekst (string) - + Height of text Height of text - + Height Visina - + Intercharacter spacing Intercharacter spacing - + Tracking Tracking - + Full path to font file: Full path to font file: - + Open a FileChooser for font file Open a FileChooser for font file - + Set/unset a working plane Set/unset a working plane - + Line Color Boja linije - + Face Color Boja površina - + Line Width Širina linije - + Font Size Veličina fonta - + Apply to selected objects Primijeni na odabrane objekte - + Toggles Construction Mode Uključuje graditeljski način - + Select Plane Odaberite ravninu - + Line Linija - + DWire DWire - + Circle Krug - + Center X Centar X - + Arc Luk - + Point Točka - + Distance Udaljenost - + Trim Skrati - + Pick Object Odaberite objekt - + Edit Uredi - + Global X Global X - + Global Y Global Y - + Global Z Global Z - + Local X Local X - + Local Y Local Y - + Local Z Local Z - + Invalid Size value. Using 200.0. Invalid Size value. Using 200.0. - + Invalid Tracking value. Using 0. Invalid Tracking value. Using 0. - + Please enter a text string. Please enter a text string. - + Select a Font file Select a Font file - + Please enter a font file. Please enter a font file. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + Found groups: closing each open object inside Pronađena skupine: zatvaranje svih otvorenih objekata unutar njih - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidificable object: solidifying it Pronađen 1 objekt koji se može pretvoriti u tijelo: pretvaram ga - + Found 2 objects: fusing them Pronađena 2 objekata: spajam ih - - Found several objects: making a shell - - Found several objects: making a shell - - - - - Found several coplanar objects or faces: making one face - - Found several coplanar objects or faces: making one face - - - - + Found 1 non-parametric objects: draftifying it Pronađen 1 neparametarski objekt: prilagođavam ga nacrtu - - Found 1 closed sketch object: making a face from it - - Pronađena 1 zatvorena skica: stvaranje površine - - - - Found closed wires: making faces - - Found closed wires: making faces - - - - + Found 1 open wire: closing it Pronađena 1 otvorena žica: zatvaranje - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Pronađeno je nekoliko rubova: ožiči ih - - Found several non-treatable objects: making compound - - Pronađeno je nekoliko nezavisnih objekata: izrada spoja - - - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 parametric object: breaking its dependencies Pronađen 1 parametarski objekt: razbijanje njegovih ovisnosti - + Found 2 objects: subtracting them Pronađena 2 objekta: oduzimam ih - + Found several faces: splitting them Pronađeno je nekoliko površina: cijepam ih - + Found several objects: subtracting them from the first one Pronađeno je nekoliko objekata: oduzimam ih od prvog - + Found 1 face: extracting its wires Pronađena 1 površina: izvlačenje njenih žica - + Found only wires: extracting their edges Pronađene samo žice: vađenje njihovih rubova - + No more downgrade possible Nije moguće više cijepati - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + Pick a face to define the drawing plane Odaberite površinu za definiranje ravnine crtanja - + Pick first point: Odaberite prvu točku - + Create Line Create Line - + Create DWire Napravi žicu - + DWire has been closed Žica je zatvorena - + Last point has been removed Posljednja točka je uklonjena - + Pick next point: Odaberite sljedeću točku - + Pick next point, or (F)inish or (C)lose: Odaberite sljedeću točku, ili (f)Završi ili (C)Zatvori - + BSpline BSpline @@ -2262,7 +2323,7 @@ Vrijednosti s razlikama ispod te vrijednosti će biti tretirane kao jednake.Krivulja je zatvorena - + Create BSpline Kreiraj B-spline @@ -2272,363 +2333,357 @@ Vrijednosti s razlikama ispod te vrijednosti će biti tretirane kao jednake.BezCurve - + Bezier curve has been closed Bezier curve has been closed - + Create BezCurve Create BezCurve - + Rectangle Pravokutnik - + Create Plane Create Plane - + Create Rectangle Kreiraj pravokutnik - + Pick opposite point: Odaberite suprotnu točku - + Pick center point: Odaberite središte točke - + Pick radius: Odaberite polumjer - + Pick start angle: Odaberite početak kuta - + Pick aperture: Odaberi otvor blende: - + Create Circle Kreiraj krug - + Create Arc Kreiraj luk - + Start Angle Početni kut - + Aperture Apertura - + Aperture angle: Kut otvora blende: - + Polygon Poligon - + Create Polygon Kreiraj poligon - + Ellipse Elipsa - + Create Ellipse Create Ellipse - + Text Tekst - + Pick location point: Odaberite mjesto točke - + Create Text Stvori tekst - + Dimension Dimenzija - + Create Dimension Kreiraj dimenziju - + Edges don't intersect! Rubovi se ne sijeku! - + ShapeString ShapeString - + Pick ShapeString location point: Pick ShapeString location point: - + Create ShapeString Create ShapeString - + Move Pomicanje - + Select an object to move Odaberite objekt za pomicanje - + Pick start point: Odaberite početnu točku - + Copy Kopiraj - + Pick end point: Odaberite završnu točku - + Change Style Promjeni stil - + Select an object to rotate Odaberite objekt za rotiranje - + Pick rotation center: Odaberite centar rotacije - + Rotate Rotiraj - + Pick base angle: Odaberite bazu kuta - + Pick rotation angle: Odaberite kut rotacije - + Select an object to offset Odaberite objekt za pomak - + Offset only works on one object at a time Pomak radi samo za jedan objekt - + Cannot offset this object type Ne mogu pomaknuti ovaj tip objekta - + Pick distance: Odaberite udaljenost - + Select an object to upgrade Odaberite objekt za nadogradnju - + Upgrade Nadogradnja - + Downgrade Razbiti - - Select an object to trim/extend - - Odaberite objekt za podrezivanje / proširivanje - - - + Scale Skaliraj - + Select an object to scale Odaberite objekt za skaliranje - + Pick base point: Odaberite ishodišnu točku: - + Pick scale factor: Odredite faktor skaliranja: - + Select an object to project Select an object to project - + Select a Draft object to edit Select a Draft object to edit - + This object type is not editable Ovaj tip objekta nije moguće uređivati - + Active object must have more than two points/nodes Aktivni objekt mora imati više od dvije točke/čvora - + Selection is not a Knot Selection is not a Knot - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert Select an object to convert - + Select an object to array Select an object to array - + Please select base and path objects Please select base and path objects - + Create Point Create Point - + Select an object to clone Select an object to clone - + Select face(s) on existing object(s) Select face(s) on existing object(s) @@ -2642,41 +2697,212 @@ Vrijednosti s razlikama ispod te vrijednosti će biti tretirane kao jednake. - - Installed Macros - Instalirane makro naredbe - - - + &Draft &Nacrt - + Utilities Utilities - + Wire tools alati konture - + Snapping Snapping - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Sides Sides + + + BSplines and Bezier curves are not supported by this tool + BSplines and Bezier curves are not supported by this tool + + + + The given object is not planar and cannot be converted into a sketch. + The given object is not planar and cannot be converted into a sketch. + + + + Found several objects: creating a shell + + Found several objects: creating a shell + + + + + Found several coplanar objects or faces: creating one face + + Found several coplanar objects or faces: creating one face + + + + + Found 1 linear object: converting to line + + Found 1 linear object: converting to line + + + + + Found 1 closed sketch object: creating a face from it + + Found 1 closed sketch object: creating a face from it + + + + + Found closed wires: creating faces + + Found closed wires: creating faces + + + + + Found several non-treatable objects: creating compound + + Found several non-treatable objects: creating compound + + + + + Length + Dužina + + + + Angle + Kut + + + + Length of current segment + Length of current segment + + + + Angle of current segment + Angle of current segment + + + + Check this to lock the current angle (l) + Check this to lock the current angle (l) + + + + Con&tinue + Con&tinue + + + + &Select edge + &Select edge + + + + Selects an existing edge to be measured by this dimension (E) + Selects an existing edge to be measured by this dimension (E) + + + + Auto + Auto + + + + Sorry, offset of Bezier curves is currently still not supported + + Sorry, offset of Bezier curves is currently still not supported + + + + + Convert to Sketch + Convert to Sketch + + + + Convert to Draft + Convert to Draft + + + + Convert + Convert + + + + Array + Polje + + + + Select object(s) to trim/extend + + Select object(s) to trim/extend + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + Unable to trim these objects, only Draft wires and arcs are supported + + + + + Unable to trim these objects, too many wires + + Unable to trim these objects, too many wires + + + + + These objects don't intersect + + These objects don't intersect + + + + + Too many intersection points + + Too many intersection points + + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.qm b/src/Mod/Draft/Resources/translations/Draft_hu.qm index 76ae9717bf..e7ff0cff8d 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_hu.qm and b/src/Mod/Draft/Resources/translations/Draft_hu.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.ts b/src/Mod/Draft/Resources/translations/Draft_hu.ts index c1db8dc57f..43bd7863f6 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hu.ts @@ -1,15 +1,29 @@ + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + + Draft_AddPoint - + Add Point Pont hozzáadása - + Adds a point to an existing wire/bspline Ponttal egészíti ki a meglévő vonalat / vonalakat @@ -17,12 +31,12 @@ Draft_AddToGroup - + Add to group... Csoporthoz adás... - + Adds the selected object(s) to an existing group Kijelölt objektum(ok) hozzáadja a létező csoporthoz @@ -30,12 +44,12 @@ Draft_ApplyStyle - + Apply Current Style Aktuális stílus alkalmazása - + Applies current line width and color to selected objects A kijelölt objektumok aktuális vonal vastagságát és színét vonatkoztatja @@ -43,12 +57,12 @@ Draft_Arc - + Arc Ív - + Creates an arc. CTRL to snap, SHIFT to constrain Ív létrehozása. CTRL igazít, SHIFT korlátoz @@ -56,12 +70,12 @@ Draft_Array - + Array - Tömb + Sorba rendezés - + Creates a polar or rectangular array from a selected object Poláris vagy téglalap alakú tömb létrehozása a kijelölt objektumból @@ -69,12 +83,12 @@ Draft_BSpline - + B-Spline B-görbe - + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain Több pontos B-görbe létrehozása. CTRL igazít, SHIFT korlátoz @@ -89,18 +103,18 @@ Creates a Bezier curve. CTRL to snap, SHIFT to constrain - Creates a Bezier curve. CTRL to snap, SHIFT to constrain + A Bezier-görbét hoz létre. CTRL az illesztéshez, SHIFT a kényszerítéshez Draft_Circle - + Circle Kör - + Creates a circle. CTRL to snap, ALT to select tangent objects Kör létrehozása. CTRL igazít, ALT érintő kiválasztása @@ -108,12 +122,12 @@ Draft_Clone - + Clone Klónozás - + Clones the selected object(s) Kijelölt objektum(ok) klónozása @@ -121,12 +135,12 @@ Draft_CloseLine - + Close Line Vonal lezárása - + Closes the line being drawn Rajzolt vonalsorozat lezárása @@ -134,12 +148,12 @@ Draft_DelPoint - + Remove Point Pont eltávolítása - + Removes a point from an existing wire or bspline Törli a meglévő pontot a vonalról vagy vonalakról @@ -147,12 +161,12 @@ Draft_Dimension - + Dimension Dimenzió - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Létrehoz egy dimenziót. CTRL (igazítás), SHIFT (korlázoz), ALT szegmens kiválasztás @@ -160,12 +174,12 @@ Draft_Downgrade - + Downgrade Visszaminősítés - + Explodes the selected objects into simpler objects, or subtract faces A kijelölt objektumokat szétbontja egyszerűbb objektumokká vagy kivonja a felületeket egymásból @@ -173,7 +187,7 @@ Draft_Draft2Sketch - + Draft to Sketch Terv a vázlathoz @@ -181,12 +195,12 @@ Draft_Drawing - + Drawing Rajzolás - + Puts the selected objects on a Drawing sheet. A kijelölt objektumok rajzlapra helyezi. @@ -194,12 +208,12 @@ Draft_Edit - + Edit Szerkesztés - + Edits the active object Az aktív objektum szerkesztése @@ -207,25 +221,25 @@ Draft_Ellipse - + Ellipse Ellipszis - + Creates an ellipse. CTRL to snap - Creates an ellipse. CTRL to snap + Ellipszis létrehozása. CTRL az illesztéshez Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) Creates a facebinder object from selected face(s) @@ -233,12 +247,12 @@ Draft_FinishLine - + Finish line Vonal befejezése - + Finishes a line without closing it Befejez anélkül, hogy bezárná a vonalat @@ -246,51 +260,38 @@ Draft_FlipDimension - + Flip Dimension - Flip Dimension + Dimenziók megfordítása - + Flip the normal direction of a dimension - Flip the normal direction of a dimension + A dimenzió irányának megfordítása Draft_Heal - + Heal - Heal + Gyógyítani - - Heal faultly Draft objects saved from an earlier FreeCAD version - Heal faultly Draft objects saved from an earlier FreeCAD version - - - - Draft_Layer - - - Layer - Layer - - - - Adds a layer - Adds a layer + + Heal faulty Draft objects saved from an earlier FreeCAD version + Heal faulty Draft objects saved from an earlier FreeCAD version Draft_Line - + Line Vonal - + Creates a 2-point line. CTRL to snap, SHIFT to constrain 2 pontos vonal készítése. CTRL igazítás, SHIFT korlátoz @@ -298,12 +299,12 @@ Draft_Move - + Move Mozgat - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy A kijelölt objektum mozgatása két pont között. CTRL igazít, SHIFT kényszerít, ALT másol @@ -311,12 +312,12 @@ Draft_Offset - + Offset Eltolás - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Az aktív objektum mozgatása. CTLR igazít, SHIFT kényszerít, ALT másol @@ -324,25 +325,25 @@ Draft_PathArray - + PathArray - PathArray + Sorba rendezés elérési útja - + Creates copies of a selected object along a selected path. - Creates copies of a selected object along a selected path. + A kijelölt objektummal a kijelölt útvonalon másolatokat készít. Draft_Point - + Point Pont - + Creates a point object Létrehoz egy pont objektumot @@ -350,12 +351,12 @@ Draft_Polygon - + Polygon Sokszög - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Szabályos sokszög létrehozása. CTRL Csatlakozáshoz, SHIFT kiválasztáshoz @@ -363,12 +364,12 @@ Draft_Rectangle - + Rectangle Téglalap - + Creates a 2-point rectangle. CTRL to snap Téglalap létrehozása 2 ponttal. CTRL igazít @@ -376,12 +377,12 @@ Draft_Rotate - + Rotate Forgatás - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Kijelölt objektumok forgatása. CTLR igazítás, SHIFT kényszerít, ALT másolatot készít @@ -389,12 +390,12 @@ Draft_Scale - + Scale Méret - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Méretezi a kiválasztott objektumot az alap ponttól. CTRL a csatoláshoz, SHIFT a megtartáshoz, ALT CTRL a másoláshoz @@ -402,12 +403,12 @@ Draft_SelectGroup - + Select group Válassza ki a csoportot - + Selects all objects with the same parents as this group Kiválasztja az összes azonos szülőkkel rendelkező objektumot ebben a csoportban @@ -415,12 +416,12 @@ Draft_SelectPlane - + SelectPlane Sík kijelölés - + Select a working plane for geometry creation Válassz ki egy munkasíkot a geometria létrehozásához @@ -428,17 +429,17 @@ Draft_Shape2DView - + Shape 2D view 2D alak nézet - + Creates Shape 2D views of selected objects A kijelölt tárgy 2D felület nézetét hozza létre - + Convert bidirectionally between Draft and Sketch objects Konvertálja kettős irányba a terv és a vázlat objektumokat @@ -446,12 +447,12 @@ Draft_ShapeString - + Shape from text... Shape from text... - + Creates text string in shapes. Creates text string in shapes. @@ -459,12 +460,12 @@ Draft_ShowSnapBar - + Show Snap Bar Illesztési sáv megjelenítése - + Shows Draft snap toolbar Illesztési pont eszköztár megjelenítése @@ -472,12 +473,12 @@ Draft_Snap_Angle - + Angles Angles - + Snaps to 45 and 90 degrees points on arcs and circles Snaps to 45 and 90 degrees points on arcs and circles @@ -485,12 +486,12 @@ Draft_Snap_Center - + Center Center - + Snaps to center of circles and arcs Snaps to center of circles and arcs @@ -498,12 +499,12 @@ Draft_Snap_Dimensions - + Dimensions Méretek - + Shows temporary dimensions when snapping to Arch objects Shows temporary dimensions when snapping to Arch objects @@ -511,12 +512,12 @@ Draft_Snap_Endpoint - + Endpoint Endpoint - + Snaps to endpoints of edges Snaps to endpoints of edges @@ -524,12 +525,12 @@ Draft_Snap_Extension - + Extension Extension - + Snaps to extension of edges Snaps to extension of edges @@ -537,12 +538,12 @@ Draft_Snap_Grid - + Grid Grid - + Snaps to grid points Snaps to grid points @@ -550,12 +551,12 @@ Draft_Snap_Intersection - + Intersection Metszet - + Snaps to edges intersections Snaps to edges intersections @@ -563,12 +564,12 @@ Draft_Snap_Lock - + Toggle On/Off Toggle On/Off - + Activates/deactivates all snap tools at once Activates/deactivates all snap tools at once @@ -576,12 +577,12 @@ Draft_Snap_Midpoint - + Midpoint Midpoint - + Snaps to midpoints of edges Snaps to midpoints of edges @@ -589,12 +590,12 @@ Draft_Snap_Near - + Nearest Nearest - + Snaps to nearest point on edges Snaps to nearest point on edges @@ -602,12 +603,12 @@ Draft_Snap_Ortho - + Ortho Ortho - + Snaps to orthogonal and 45 degrees directions Snaps to orthogonal and 45 degrees directions @@ -615,12 +616,12 @@ Draft_Snap_Parallel - + Parallel Parallel - + Snaps to parallel directions of edges Snaps to parallel directions of edges @@ -628,12 +629,12 @@ Draft_Snap_Perpendicular - + Perpendicular Perpendicular - + Snaps to perpendicular points on edges Snaps to perpendicular points on edges @@ -641,12 +642,12 @@ Draft_Snap_WorkingPlane - + Working Plane Working Plane - + Restricts the snapped point to the current working plane Restricts the snapped point to the current working plane @@ -654,12 +655,12 @@ Draft_Text - + Text Szöveg - + Creates an annotation. CTRL to snap Megjegyzés létrehozása. CTRL igazt @@ -667,12 +668,12 @@ Draft_ToggleConstructionMode - + Toggle construcion Mode Váltás szerkezeti módra - + Toggles the Construction Mode for next objects. Váltás szerkezeti módra a következő objektumoknál. @@ -680,12 +681,12 @@ Draft_ToggleContinueMode - + Toggle Continue Mode Toggle Continue Mode - + Toggles the Continue Mode for next commands. A folyamat mód következő parancsra váltása. @@ -693,12 +694,12 @@ Draft_ToggleDisplayMode - + Toggle display mode Megjelenítési mód váltása - + Swaps display mode of selected objects between wireframe and flatlines Válassz megjelenítési módot a Drótvázas és a Sima vonalak között @@ -706,25 +707,25 @@ Draft_ToggleGrid - + Toggle Grid Rácsvonal kapcsolása - - Toggles the Draft gid on/off - Tervezési rácsvonal be/ki + + Toggles the Draft grid on/off + Toggles the Draft grid on/off Draft_Trimex - + Trimex Levág-Bővít (trimex) - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts A kijelölt tárgyat levág és meghosszabbít vagy kihúz egy egyoltalú felületet. CTRL-al kapcsolódik, SHIFT-el szegmenst választ vagy a normális, ALT megfordít @@ -732,12 +733,12 @@ Draft_UndoLine - + Undo last segment Utolsó szakasz visszavonása - + Undoes the last drawn segment of the line being drawn A vonal utolsó rajzolt szakaszának visszavonása @@ -745,25 +746,38 @@ Draft_Upgrade - + Upgrade Frissítés - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces Összekapcsolja a kiválasztott objektumokat, vagy az összekötött vonalakat felületté, síkká alakítja + + Draft_VisGroup + + + VisGroup + VisGroup + + + + Adds a VisGroup + Adds a VisGroup + + Draft_Wire - + DWire Terv-vonal - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain Létrehoz egy több pont Terv-vonalat. Igazítás (CTRL), húzás a SHIFT @@ -771,12 +785,12 @@ Draft_WireToBSpline - + Wire to BSpline Huzal - B-Spline - + Converts between Wire and BSpline Konvertálás huzal és B-Spline között @@ -804,17 +818,17 @@ A csatolás szimbólum alap színe - + This is the default color for objects being drawn while in construction mode. Ez az alapértelmezett színe a tárgyaknak, az építési módban. - + This is the default group name for construction geometry Ez az alapértelmezett csoport-név, az építési geometriánál - + Construction Alkotás @@ -917,17 +931,17 @@ such as "Arial:Bold" Eredeti szín és vonalvastagság - + if this is checked, paper space objects will be imported too Ha ez be van jelölve, a lapok helyett objektumok is importálásra kerülnek - + if this is unchecked, texts/mtexts won't be imported ha ez nincs bejelölve, szövegek/összetett szövegek nem importálhatók - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. Ha vonal szegmenseket exportál DXF-be, át lesznek alakítva vonal láncokká. Ez az érték az egyes vonallánc szegmensek maximális hosszát adja meg. Ha 0, akkor a teljes vonal szegmenst egy egyenesként kezeli. @@ -952,7 +966,7 @@ such as "Arial:Bold" Általános beállítások - + Construction group name Konstrukció-csoport neve @@ -968,22 +982,22 @@ Values with differences below this value will be treated as same. Ez az érték a tűréshatárt használó funkciók által használt. Ezen érték alatti értékeket azonosnak kell tekinteni. - + DXF format options DXF formátum beállításai - + Check this if you want the non-named blocks (beginning with a *) to be imported too Jelölje be, ha azt szeretné, hogy a név nélküli blokkok (*-al kezdődő) importálva legyenek - + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... Ha be van jelölve, FreeCAD megpróbálja összekötni a közös referenciapontos objektumokat vonalakká. Vigyázz, ez eltarthat egy ideig... - + Join geometry Geometria csatlakoztatása @@ -1083,32 +1097,32 @@ Values with differences below this value will be treated as same. Válassza ki a bázis objektumokat másolás után - + If checked, a grid will appear when drawing Ha be van jelölve, egy rács jelenik meg, ha rajzol - + Use grid Rács használata - + Grid spacing Rács térköze - + The spacing between each grid line A rács vonalainak egymás közti távolságai - + Main lines every Minden egyes fővonal - + Mainlines will be drawn thicker. Specify here how many squares between mainlines. A fő vonalak vastagab rajzolatúak. Adja meg, mennyi négyzet legyen a fővonalak közt. @@ -1138,22 +1152,22 @@ Values with differences below this value will be treated as same. Jobb - + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable ha ez be van jelölve, tárgyakat azonos rétegekből össze lesznek kötve tervrajz blokká, gyorsabb kijelzéshez, de így nehezebben szerkeszthető - + Group layers into blocks Csoport rétegek tömbökké - + If this is checked, all objects containing faces will be exported as 3d polyfaces Ha ez be van jelölve, minden kijelölt tárgyat, amely síkokat tartalmaz, 3d soksíkú felületté exportálja - + Export 3D objects as polyface meshes 3D objektum exportálása többfelületű hálórajzzá @@ -1193,37 +1207,37 @@ Values with differences below this value will be treated as same. Munka sík követő megjelenítése - + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command Ha be van jelölve, a tervrajz rács mindig látható lesz, ha a tervrajz munkafelület aktív. Egyébként csak akkor,ha parancsot használ - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document Ha be van jelölve, az importált szövegek az alap rajzolási szöveg méretet kapják, nem a DXF dokumentum eredeti szövegméretét - + Use standard font size for texts Használja az alap betűméretet a szövegekhez - + If this is checked, hatches will be converted into simple wires Ha ez be van jelölve, a határok egyszerű vonallá lesznek alakítva - + Import hatch boundaries as wires Kitöltési határok importálása vonalként - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width Ha ez bekapcsolva, a megadott vonallánc szélességel, akkor összeolvasztja a vonalakat a megfelelő vastagság használatával - + Render polylines with width Összekapcsolt vonalláncok vastagság meghatározása @@ -1278,79 +1292,79 @@ Values with differences below this value will be treated as same. Always snap (disable snap mod) - + Construction geometry Építőipari geometria - + Construction geometry color Construction geometry color - + Import - Import - - - - texts and dimensions - texts and dimensions - - - - points - points + Importálás + texts and dimensions + szövegek és méretek + + + + points + pontok + + + layouts - layouts + elrendezések - + *blocks - *blocks + *blokkok - + If this is checked, the exported objects will be projected to reflect the current view direction - If this is checked, the exported objects will be projected to reflect the current view direction + Ha ez be van jelölve, az exportált objektumok lesznek kivetítve ami az aktuális nézet irányát tükrözi - + Project exported objects along current view direction - Project exported objects along current view direction + Exportált objektumok kivetítése az aktuális nézet iránya mentén - + Ellipse export is badly supported. Use this to export them as polylines instead. - Ellipse export is badly supported. Use this to export them as polylines instead. + Ellipszis exportot rosszul támogatja. Ennek segítségével exportálhatja vonalláncokként. - + DWG format options - DWG format options + DWG formátum beállítások - + Path to Teigha File Converter - Path to Teigha File Converter + Teigha fájl átalakító elérési útja - + The path to your Teigha File Converter executable - The path to your Teigha File Converter executable + A Teigha fájl konverter végrehajtható fájl elérési útja Visual settings - Visual settings + Vizuális beállítások Visual Settings - Visual Settings + Vizuális beállítások @@ -1360,17 +1374,17 @@ Values with differences below this value will be treated as same. Default line width - Default line width + Alapértelmezett vonalvastagság Snap symbols style - Snap symbols style + Illesztés szimbólumok stílusa Draft classic style - Draft classic style + Klasszikus stílusú tervrajz @@ -1380,7 +1394,7 @@ Values with differences below this value will be treated as same. Color - Color + Szín @@ -1393,82 +1407,67 @@ Values with differences below this value will be treated as same. Grid - + Always show the grid Always show the grid Texts and dimensions - Texts and dimensions + Szövegek és méretek Texts - Texts + Szövegek font - font + betűtípus Internal font - Internal font + Belső betűtípus size - size + méret - + Dimensions arrows - Dimensions arrows + Méretező nyilak - + style - style + stílus - + Dot - Dot + Pont - + Circle Kör - + Arrow - Arrow + Nyíl - + The default size of arrows The default size of arrows - - Dimensions lines - Dimensions lines - - - - text above - text above - - - - text inside - text inside - - - + The default size of dimensions extension lines The default size of dimensions extension lines @@ -1505,83 +1504,58 @@ Values with differences below this value will be treated as same. Fill objects with faces whenever possible - Fill objects with faces whenever possible + Töltse ki a tárgyakat felületekkel amikor csak lehetséges - - DXF / DWG options - DXF / DWG options - - - + Create Létrehozás - - If thi sis checked, only standard Part objects will be created (fastest) - If thi sis checked, only standard Part objects will be created (fastest) - - - + simple Part shapes simple Part shapes - + If this is checked, parametric Draft objects will be created whenever possible If this is checked, parametric Draft objects will be created whenever possible - + Draft objects Draft objects - + If this is checked, sketches will be created whenever possible If this is checked, sketches will be created whenever possible - + Sketches Sketches - + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. - + Get original colors from the DXF file Get original colors from the DXF file - - If this is checked, DXF layers will be imported as Draft layers - If this is checked, DXF layers will be imported as Draft layers - - - - Use Draft Layers - Use Draft Layers - - - + Treat ellipses and splines as polylines Treat ellipses and splines as polylines - + Max Spline Segment: Max Spline Segment: - - - SVG / OCA options - SVG / OCA options - Export style @@ -1597,21 +1571,146 @@ Values with differences below this value will be treated as same. Show the unit suffix in dimensions Show the unit suffix in dimensions + + + DXF / DWG + DXF / DWG + + + + Automatic update + Automatic update + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + + + + Allow FreeCAD to automatically download and update the DXF libraries + Allow FreeCAD to automatically download and update the DXF libraries + + + + If this is checked, only standard Part objects will be created (fastest) + If this is checked, only standard Part objects will be created (fastest) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + If this is checked, DXF layers will be imported as Draft VisGroups + + + + Use VisGroups + Use VisGroups + + + + mm + mm + + + + SVG / OCA + SVG / OCA + + + + Grid size + Grid size + + + + the number of horizontal or vertical lines of the grid + the number of horizontal or vertical lines of the grid + + + + lines + lines + + + + Dimensions + Méretek + + + + display mode + display mode + + + + text above (2D) + text above (2D) + + + + text inside (3D) + text inside (3D) + + + + extension lines size + extension lines size + + + + Drawing views + Drawing views + + + + Dashed line definition + Dashed line definition + + + + A SVG linestyle definition + A SVG linestyle definition + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + Dashdot line definition + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Dotted line definition + + + + 0.02,0.02 + 0.02,0.02 + Workbench - + Draft Snap Draft Snap - + Draft creation tools Tervezési létrehozó eszközök - + Draft modification tools Tervezési módosítási eszközök @@ -1619,635 +1718,597 @@ Values with differences below this value will be treated as same. draft - + Draft Command Bar Draft Command Bar - + active command: aktív parancs: - + None Egyik sem - + Active Draft command Aktív tervezési parancs - + X coordinate of next point Következő pont X koordinátája - + X X - + Y Y - + Z Z - + Y coordinate of next point Következő pont Y koordinátája - + Z coordinate of next point Következő pont Z koordinátája - + Radius Sugár - + Radius of Circle A kör sugara - + &Relative $Relatív - + Coordinates relative to last point or absolute (SPACE) Előző ponthoz viszonyított vagy abszolút koordináták (SZÓKÖZ) - + F&illed Kitöltés - + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) Jelölje be ezt, ha a tárgyat kitöltve szeretné megjeleníteni, különben drótváz (F) jelenik meg - + &Finish Befejezés - + Finishes the current drawing or editing operation (F) Befejezi az aktuális rajz vagy szerkesztési művelet (F) - + If checked, command will not finish until you press the command button again Ha be van jelölve, a parancs nem fejeződik be, amíg újra meg nem nyomja a parancs gombot - - &Continue - Folytatás &C - - - + If checked, an OCC-style offset will be performed instead of the classic offset Ha kijelölt, egy OCC-stílusú eltolás lesz végrehajtva a klasszikus eltolás helyett - + &OCC-style offset &amp; OCC-stílusú eltolás - + Add points to the current object Pontot ad az aktuális objektumhoz - + Remove points from the current object A meglévő objektumból kiveszi a pontokat - + Make Bezier node sharp Make Bezier node sharp - + Make Bezier node tangent Make Bezier node tangent - + Make Bezier node symmetric Make Bezier node symmetric - + &Undo $Visszavon - + Undo the last segment (CTRL+Z) Utolsó szakasz visszavonása (CTRL+Z) - + &Close $Bezár - + Finishes and closes the current line (C) Vonal befejezése és lezárása (C) - + &Wipe &Tisztít - + Wipes the existing segments of this line and starts again from the last point (W) Kitisztítja a meglévő szegmenst ebből a vonalból és ismét az utolsó ponttól kezdi(W) - + Number of sides Oldalak száma - + Offset Eltolás - + XY XY - + Select XY plane XY sík kiválasztása - + XZ XZ - + Select XZ plane XZ sík kiválasztása - + YZ YZ - + Select YZ plane YZ sík kiválasztása - + View Nézet - + Select plane perpendicular to the current view Aktuális nézetre merőleges sík kiválasztása - + Do not project points to a drawing plane Ne vetíts pontot a rajz síkra - + &Copy &Másol - + If checked, objects will be copied instead of moved (C) Bejelölve az objektumok másolását eredményezi mozgatás helyett - + Text string to draw Text string to draw - + String Karakterlánc - + Height of text Height of text - + Height Magasság - + Intercharacter spacing Intercharacter spacing - + Tracking Tracking - + Full path to font file: Full path to font file: - + Open a FileChooser for font file Open a FileChooser for font file - + Set/unset a working plane Set/unset a working plane - + Line Color Vonal színe - + Face Color Felület szín - + Line Width Vonalvastagság - + Font Size Betűméret - + Apply to selected objects Alkalmazás a kijelölt objektumokon - + Toggles Construction Mode Építési mód váltása - + Select Plane Jelölje ki a síkot - + Line Vonal - + DWire Terv-vonal - + Circle Kör - + Center X Közép X - + Arc Ív - + Point Pont - + Distance Távolság - + Trim Vágás - + Pick Object Objektum kiválasztás - + Edit Szerkesztés - + Global X Global X - + Global Y Global Y - + Global Z Global Z - + Local X Local X - + Local Y Local Y - + Local Z Local Z - + Invalid Size value. Using 200.0. Invalid Size value. Using 200.0. - + Invalid Tracking value. Using 0. Invalid Tracking value. Using 0. - + Please enter a text string. Please enter a text string. - + Select a Font file Select a Font file - + Please enter a font file. Please enter a font file. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + Found groups: closing each open object inside Csoportokat talált: minden belső nyitott objektum bezárása - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidificable object: solidifying it Találtunk 1 kialakítható felületet: megszilárdítjuk, felületet képezünk - + Found 2 objects: fusing them 2 Objektum található: összevonás - - Found several objects: making a shell - - Found several objects: making a shell - - - - - Found several coplanar objects or faces: making one face - - Found several coplanar objects or faces: making one face - - - - + Found 1 non-parametric objects: draftifying it Találtunk 1 nem parametrikus objektumok: vázrajzzá alakít - - Found 1 closed sketch object: making a face from it - - 1 zárt vázlat objektumot talált: felületet képez - - - - Found closed wires: making faces - - Found closed wires: making faces - - - - + Found 1 open wire: closing it 1 nyílt szakaszt talált: Bezárja - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Több élt talált: összeköti őket - - Found several non-treatable objects: making compound - - Több nem kezelhető objektumok található: összerendezés - - - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 parametric object: breaking its dependencies Találtunk 1 parametrikus objektumot: függőségeket felosztjuk - + Found 2 objects: subtracting them Két objektum találat: kivonás - + Found several faces: splitting them Több felület találat: felosztás - + Found several objects: subtracting them from the first one Több objektum találat: kivonja az elsőből - + Found 1 face: extracting its wires Találtunk 1 felületet: vonalakra bontjuk - + Found only wires: extracting their edges Csak vonalak találhatók: éleik kibontása - + No more downgrade possible Nem lehet több visszaminősítést végezni - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + Pick a face to define the drawing plane Felület megadása, amely meghatározza a rajz síkját - + Pick first point: Válassza ki az első pontot: - + Create Line Create Line - + Create DWire Rácsvonal létrehozása - + DWire has been closed A rácsvonal le lett zárva - + Last point has been removed Utolsó pont eltávolítva - + Pick next point: Következő pont kiválasztása: - + Pick next point, or (F)inish or (C)lose: Következő pont kiválasztása, vagy (F) befejez, vagy (C) lezár: - + BSpline Folyamatos ív @@ -2258,7 +2319,7 @@ Values with differences below this value will be treated as same. Görbe lezárva - + Create BSpline BSpline létrehozása @@ -2268,363 +2329,357 @@ Values with differences below this value will be treated as same. BezCurve - + Bezier curve has been closed Bezier curve has been closed - + Create BezCurve Create BezCurve - + Rectangle Téglalap - + Create Plane Create Plane - + Create Rectangle Téglalap rajzolása - + Pick opposite point: Ellenkező pontot kiválasztása: - + Pick center point: Középpont kijelölése: - + Pick radius: Sugár megadása: - + Pick start angle: Kezdő fok megadása: - + Pick aperture: Nyílás kiválasztás: - + Create Circle Kör rajzolása - + Create Arc Ív létrehozása - + Start Angle Kezdő nézet - + Aperture Nyílás - + Aperture angle: Nyílás szöge: - + Polygon Sokszög - + Create Polygon Polygon létrehozása - + Ellipse Ellipszis - + Create Ellipse Create Ellipse - + Text Szöveg - + Pick location point: Helyzet pont megadása: - + Create Text Szöveg létrehozása - + Dimension Dimenzió - + Create Dimension Méretek létrehozása - + Edges don't intersect! Élek nem metszik egymást! - + ShapeString ShapeString - + Pick ShapeString location point: Pick ShapeString location point: - + Create ShapeString Create ShapeString - + Move Mozgat - + Select an object to move Objektum kijelölése mozgatáshoz - + Pick start point: Kiinduló pont megadása: - + Copy Másolás - + Pick end point: Végpont megadása: - + Change Style Stílus váltás - + Select an object to rotate Jelöljön ki egy objektumot elforgatható - + Pick rotation center: Válassza ki az elforgatás középpontját (tengelyét): - + Rotate Forgatás - + Pick base angle: Alap szög megadása - + Pick rotation angle: Adja meg az Elforgatás szögét: - + Select an object to offset Jelöljön ki egy objektumot az eltoláshoz - + Offset only works on one object at a time Az eltoláshoz csak egy objektumot lehet kijelölni - + Cannot offset this object type Ezt az objektum típust nem képes eltolni - + Pick distance: Adja meg a távolságot - + Select an object to upgrade Jelöljön ki egy objektumot a frissítéshez - + Upgrade Frissítés - + Downgrade Visszaminősítés - - Select an object to trim/extend - - Válasszon ki egy objektumot a levágáshoz/bővítéshez - - - + Scale Méret - + Select an object to scale Objektum kijelölése a méretezéshez - + Pick base point: Bázis pont kiválasztása - + Pick scale factor: Mérettényező megadása - + Select an object to project Select an object to project - + Select a Draft object to edit Select a Draft object to edit - + This object type is not editable Ehhez az objektumtípus nem szerkezthető - + Active object must have more than two points/nodes Aktív objektumnak kettőnél több pontot, csomópontot kell tartalmaznia. - + Selection is not a Knot Selection is not a Knot - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert Select an object to convert - + Select an object to array - Select an object to array + Jelöljön ki egy objektumot, a sorba rendezéshez - + Please select base and path objects Please select base and path objects - + Create Point Create Point - + Select an object to clone Select an object to clone - + Select face(s) on existing object(s) Select face(s) on existing object(s) @@ -2638,41 +2693,212 @@ Values with differences below this value will be treated as same. - - Installed Macros - Telepített makrók - - - + &Draft - Tervezés &D + Vázrajz - + Utilities Utilities - + Wire tools Vonal eszköztár - + Snapping Snapping - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Sides Sides + + + BSplines and Bezier curves are not supported by this tool + BSplines and Bezier curves are not supported by this tool + + + + The given object is not planar and cannot be converted into a sketch. + The given object is not planar and cannot be converted into a sketch. + + + + Found several objects: creating a shell + + Found several objects: creating a shell + + + + + Found several coplanar objects or faces: creating one face + + Found several coplanar objects or faces: creating one face + + + + + Found 1 linear object: converting to line + + Found 1 linear object: converting to line + + + + + Found 1 closed sketch object: creating a face from it + + Found 1 closed sketch object: creating a face from it + + + + + Found closed wires: creating faces + + Found closed wires: creating faces + + + + + Found several non-treatable objects: creating compound + + Found several non-treatable objects: creating compound + + + + + Length + Hossz + + + + Angle + Szög + + + + Length of current segment + Length of current segment + + + + Angle of current segment + Angle of current segment + + + + Check this to lock the current angle (l) + Check this to lock the current angle (l) + + + + Con&tinue + Folytatás + + + + &Select edge + &Select edge + + + + Selects an existing edge to be measured by this dimension (E) + Selects an existing edge to be measured by this dimension (E) + + + + Auto + Auto + + + + Sorry, offset of Bezier curves is currently still not supported + + Sorry, offset of Bezier curves is currently still not supported + + + + + Convert to Sketch + Convert to Sketch + + + + Convert to Draft + Convert to Draft + + + + Convert + Convert + + + + Array + Sorba rendezés + + + + Select object(s) to trim/extend + + Select object(s) to trim/extend + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + Unable to trim these objects, only Draft wires and arcs are supported + + + + + Unable to trim these objects, too many wires + + Unable to trim these objects, too many wires + + + + + These objects don't intersect + + These objects don't intersect + + + + + Too many intersection points + + Too many intersection points + + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + diff --git a/src/Mod/Draft/Resources/translations/Draft_it.qm b/src/Mod/Draft/Resources/translations/Draft_it.qm index 73e8abca29..80250d50b9 100755 Binary files a/src/Mod/Draft/Resources/translations/Draft_it.qm and b/src/Mod/Draft/Resources/translations/Draft_it.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_it.ts b/src/Mod/Draft/Resources/translations/Draft_it.ts index 038f660e2d..2017513e2d 100755 --- a/src/Mod/Draft/Resources/translations/Draft_it.ts +++ b/src/Mod/Draft/Resources/translations/Draft_it.ts @@ -1,15 +1,26 @@ + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + Download delle librerie dxf non riuscito. Si prega di scaricarle manualmente da: https://github.com/yorikvanhavre/Draft-dxf-importer e di metterle nella cartella macro. + + Draft_AddPoint - + Add Point Aggiungi punto - + Adds a point to an existing wire/bspline Aggiunge un punto ad una polilinea/bspline esistente @@ -17,12 +28,12 @@ Draft_AddToGroup - + Add to group... - Aggiungere al gruppo... + Aggiungi al gruppo... - + Adds the selected object(s) to an existing group Aggiunge l'oggetto selezionato (o gli oggetti selezionati) ad un gruppo esistente @@ -30,12 +41,12 @@ Draft_ApplyStyle - + Apply Current Style Applica Stile Corrente - + Applies current line width and color to selected objects Applica lo spessore ed il colore della linea corrente agli oggetti selezionati @@ -43,12 +54,12 @@ Draft_Arc - + Arc Arco - + Creates an arc. CTRL to snap, SHIFT to constrain Crea un arco. CTRL per agganciare, MAIUSC per vincolare @@ -56,12 +67,12 @@ Draft_Array - + Array Matrice - + Creates a polar or rectangular array from a selected object Crea una matrice polare o rettangolare da un oggetto selezionato @@ -69,12 +80,12 @@ Draft_BSpline - + B-Spline B-Spline - + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain Crea una b-spline multi-punto. CTRL per agganciare, MAIUSC per vincolare @@ -84,23 +95,23 @@ BezCurve - BezCurve + Curva di Bezier Creates a Bezier curve. CTRL to snap, SHIFT to constrain - Crea una curva di Bezier. CTRL per lo snap, MAIUSC per limitare + Crea una curva di Bezier. CTRL per agganciare, MAIUSC per vincolare Draft_Circle - + Circle Cerchio - + Creates a circle. CTRL to snap, ALT to select tangent objects Crea un cerchio. CTRL per agganciare, ALT per selezionare oggetti tangenti @@ -108,12 +119,12 @@ Draft_Clone - + Clone Clona - + Clones the selected object(s) Clona gli oggetti selezionati @@ -121,12 +132,12 @@ Draft_CloseLine - + Close Line Chiudi la linea - + Closes the line being drawn Chiude la linea che si sta disegnando @@ -134,12 +145,12 @@ Draft_DelPoint - + Remove Point - Rimuove Punto + Rimuovi punto - + Removes a point from an existing wire or bspline Rimuovi un punto da una polilinea o bspline esistente @@ -147,12 +158,12 @@ Draft_Dimension - + Dimension Quotatura - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Crea una quotatura. CTRL per agganciare, MAIUSC per vincolare, ALT per selezionare un segmento @@ -160,12 +171,12 @@ Draft_Downgrade - + Downgrade - Retrocedere + Retrocedi - + Explodes the selected objects into simpler objects, or subtract faces Esplode gli oggetti selezionati in oggetti piú semplici, o sottrae facce @@ -173,7 +184,7 @@ Draft_Draft2Sketch - + Draft to Sketch Da Draft a Sketch @@ -181,12 +192,12 @@ Draft_Drawing - + Drawing Disegno - + Puts the selected objects on a Drawing sheet. Pone gli oggetti selezionati su un foglio di Disegno. @@ -194,12 +205,12 @@ Draft_Edit - + Edit Modifica - + Edits the active object Modifica l'oggetto attivo @@ -207,12 +218,12 @@ Draft_Ellipse - + Ellipse Ellisse - + Creates an ellipse. CTRL to snap Crea un'ellisse. CTRL per lo snap @@ -220,25 +231,25 @@ Draft_Facebinder - + Facebinder - Facebinder + Lega facce - + Creates a facebinder object from selected face(s) - Creates a facebinder object from selected face(s) + Crea un oggetto facebinder dalla faccia(e) selezionata Draft_FinishLine - + Finish line Termina la linea - + Finishes a line without closing it Termina la linea senza chiuderla @@ -246,12 +257,12 @@ Draft_FlipDimension - + Flip Dimension - Inverti dimensione + Inverti direzione - + Flip the normal direction of a dimension Inverte la direzione della normale di una dimensione @@ -259,38 +270,25 @@ Draft_Heal - + Heal Ripara - - Heal faultly Draft objects saved from an earlier FreeCAD version + + Heal faulty Draft objects saved from an earlier FreeCAD version Ripara gli oggetti Draft difettosi salvati con una versione precedente di FreeCAD - - Draft_Layer - - - Layer - Livello - - - - Adds a layer - Aggiunge un livello - - Draft_Line - + Line Linea - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Crea una linea tra due punti. CTRL per agganciare, MAIUSC per vincolare @@ -298,12 +296,12 @@ Draft_Move - + Move Sposta - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy Sposta gli oggetti selezionati tra 2 punti. CTRL per agganciare, MAIUSC per vincolare, ALT crea una copia @@ -311,12 +309,12 @@ Draft_Offset - + Offset Offset - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Crea un offset dell'oggetto selezionato. CTRL per agganciare, MAIUSC per vincolare, ALT crea una copia @@ -324,12 +322,12 @@ Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. Crea copie di un oggetto selezionato lungo un tracciato selezionato. @@ -337,12 +335,12 @@ Draft_Point - + Point Punto - + Creates a point object Crea un oggetto punto @@ -350,12 +348,12 @@ Draft_Polygon - + Polygon Poligono - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Crea un poligono regolare. CTRL per agganciare, MAIUSC per vincolare @@ -363,12 +361,12 @@ Draft_Rectangle - + Rectangle Rettangolo - + Creates a 2-point rectangle. CTRL to snap Crea un rettangolo tra due punti. CTRL per agganciare @@ -376,12 +374,12 @@ Draft_Rotate - + Rotate Ruota - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Ruota gli oggetti selezionati. CTRL per agganciare, MAIUSC per vincolare, ALT crea una copia @@ -389,12 +387,12 @@ Draft_Scale - + Scale Scala - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Scala gli oggetti selezionati partendo da un punto base. CTRL per agganciare, MAIUSC per vincolare, ALT crea una copia @@ -402,25 +400,25 @@ Draft_SelectGroup - + Select group - Selezionare gruppo + Seleziona gruppo - + Selects all objects with the same parents as this group - Seleziona tutti gli oggetti aventi gli stessi genitori di questo gruppo + Seleziona tutti gli oggetti di questo gruppo aventi gli stessi genitori Draft_SelectPlane - + SelectPlane SelezionaPiano - + Select a working plane for geometry creation Seleziona un piano di lavoro per creare la geometria @@ -428,69 +426,69 @@ Draft_Shape2DView - + Shape 2D view Vista Profilo 2D - + Creates Shape 2D views of selected objects - Crea viste "Profilo 2D" degli oggetti selezionati + Crea delle viste "Profilo 2D" degli oggetti selezionati - + Convert bidirectionally between Draft and Sketch objects - Converte in entrambe le direzioni tra oggetti Draft e Sketch + Converte oggetti Draft in Schizzi, e viceversa Draft_ShapeString - + Shape from text... Forma da testo... - + Creates text string in shapes. - Creates text string in shapes. + Crea una stringa di testo nella forma. Draft_ShowSnapBar - + Show Snap Bar Mostra barra Snap - + Shows Draft snap toolbar - Mostra la barra degli strumenti Snap + Mostra la barra degli strumenti di aggancio, Snap Draft_Snap_Angle - + Angles Angoli - + Snaps to 45 and 90 degrees points on arcs and circles - Snap ai punti a 45 e 90 gradi su archi e cerchi + Aggancia i punti a 45 e 90 gradi su archi e cerchi Draft_Snap_Center - + Center Centro - + Snaps to center of circles and arcs Snap al centro di cerchi e archi @@ -498,64 +496,64 @@ Draft_Snap_Dimensions - + Dimensions Dimensioni - + Shows temporary dimensions when snapping to Arch objects - Mostra quotature temporanee durante lo snap agli oggetti Arch + Mostra le quotature temporanee durante l'aggancio agli oggetti Arch Draft_Snap_Endpoint - + Endpoint Punto finale - + Snaps to endpoints of edges - Snap ai punti finali degli spigoli + Aggancia i punti finali degli spigoli Draft_Snap_Extension - + Extension Estensione - + Snaps to extension of edges - Snap all'estensione degli spigoli + Aggancia gli spigoli sulla loro estensione Draft_Snap_Grid - + Grid Griglia - + Snaps to grid points - Snap ai punti della griglia + Aggancia i punti della griglia Draft_Snap_Intersection - + Intersection Intersezione - + Snaps to edges intersections Snap alle intersezioni degli spigoli @@ -563,25 +561,25 @@ Draft_Snap_Lock - + Toggle On/Off - Attiva/disattiva + Attiva/Disattiva - + Activates/deactivates all snap tools at once - Attiva/disattiva tutti gli strumenti snap in una volta + Attiva/disattiva contemporaneamente tutti gli strumenti snap Draft_Snap_Midpoint - + Midpoint Punto medio - + Snaps to midpoints of edges Snap ai punti medi degli spigoli @@ -589,12 +587,12 @@ Draft_Snap_Near - + Nearest Vicino - + Snaps to nearest point on edges Snap al punto più vicino sugli spigoli @@ -602,12 +600,12 @@ Draft_Snap_Ortho - + Ortho Ortogonale - + Snaps to orthogonal and 45 degrees directions Snap ortogonale e a 45 gradi @@ -615,12 +613,12 @@ Draft_Snap_Parallel - + Parallel Parallelo - + Snaps to parallel directions of edges Snap in direzione parallela agli spigoli @@ -628,12 +626,12 @@ Draft_Snap_Perpendicular - + Perpendicular Perpendicolare - + Snaps to perpendicular points on edges Snap ai punti perpendicolari sugli spigoli @@ -641,25 +639,25 @@ Draft_Snap_WorkingPlane - + Working Plane Piano di lavoro - + Restricts the snapped point to the current working plane - Limita il punto di snap al piano di lavoro corrente + Limita la zona di snap al piano di lavoro corrente Draft_Text - + Text Testo - + Creates an annotation. CTRL to snap Crea un'annotazione. CTRL per lo snap @@ -667,12 +665,12 @@ Draft_ToggleConstructionMode - + Toggle construcion Mode Attiva/Disattiva Modalità costruzione - + Toggles the Construction Mode for next objects. Attiva/disattiva la Modalità Costruzione per i prossimi oggetti. @@ -680,12 +678,12 @@ Draft_ToggleContinueMode - + Toggle Continue Mode - Attiva/disattiva modo continuo + Attiva/disattiva Modalità Continua - + Toggles the Continue Mode for next commands. Attiva o disattiva la Modalità "Continua" per i comandi successivi. @@ -693,12 +691,12 @@ Draft_ToggleDisplayMode - + Toggle display mode Attiva/Disattiva la modalità di visualizzazione - + Swaps display mode of selected objects between wireframe and flatlines Alterna la modalità di visualizzazione degli oggetti selezionati tra "a reticolo" e "a facce piene" @@ -706,38 +704,38 @@ Draft_ToggleGrid - + Toggle Grid Attiva/disattiva griglia - - Toggles the Draft gid on/off - Attiva/disattiva la griglia Draft + + Toggles the Draft grid on/off + Attiva o disattiva la griglia di Draft Draft_Trimex - + Trimex - Tronca/Estende + Tronca/Estendi - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts - Tronca o estende l'oggetto selezionato, o estrude singole facce. CTRL per agganciare, MAIUSC per vincolare al segmento corrente o alla sua normale, ALT inverte + Tronca o estende l'oggetto selezionato, o estrude singole facce. CTRL per agganciare, MAIUSC per vincolare al segmento corrente o alla sua normale, ALT per invertire Draft_UndoLine - + Undo last segment Annulla l'ultimo segmento - + Undoes the last drawn segment of the line being drawn Annulla l'ultimo segmento disegnato della linea che si sta disegnando @@ -745,38 +743,51 @@ Draft_Upgrade - + Upgrade - Promuovere + Promuovi - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces Congiunge gli oggetti selezionati, o converte polilinee chiuse in facce piene, o unisce facce + + Draft_VisGroup + + + VisGroup + VisGroup + + + + Adds a VisGroup + Aggiunge un VisGroup + + Draft_Wire - + DWire DWire - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain - Crea DraftWire (DWire) multipunto. CTRL per eseguire lo snap, MAIUSC per vincolare + Crea una polilinea (DWire, Wire di Draft) da una serie di punti. CTRL per eseguire lo snap, MAIUSC per vincolare Draft_WireToBSpline - + Wire to BSpline Da Polilinea a BSpline - + Converts between Wire and BSpline Converte tra Polilinea e BSpline @@ -804,24 +815,24 @@ il colore predefinito per i simboli di aggancio - + This is the default color for objects being drawn while in construction mode. - Questo è il colore predefinito per oggetti che vengon disegnati in modalità costruzione. + Questo è il colore predefinito per oggetti che vengono disegnati in modalità costruzione. - + This is the default group name for construction geometry Questo è il nome predefinito del gruppo per la geometria di costruzione - + Construction Costruzione check this if you want to use the color/linewidth from the toolbar as default - Spuntare questa opzione se si desidera utilizzare il colore/spessore di linea dalla barra degli strumenti, come impostazione predefinita + Spuntare questa opzione se si desidera utilizzare il colore e lo spessore di linea dalla barra degli strumenti, come impostazione predefinita @@ -884,13 +895,13 @@ It can be a font name such as "Arial", a default style such as "sans", "serif" or "mono", or a family such as "Arial,Helvetica,sans" or a name with a style such as "Arial:Bold" - Questo è il nome del carattere predefinito per tutti i testi e le quotature di Abbozzo. + Questo è il nome del carattere predefinito per tutti i testi e le quotature di Draft. Può essere un nome di carattere come "Arial", uno stile predefinito come "sans", "serif" o "mono", o una famiglia come "Arial,Helvetica,sans" o un nome con uno stile come "Arial:Bold" Default template sheet - Foglio di modello predefinito + Modello di foglio predefinito @@ -918,17 +929,17 @@ Può essere un nome di carattere come "Arial", uno stile predefinito come "sans" Colore e spessore di linea originali - + if this is checked, paper space objects will be imported too Se questa opzione è spuntata, verranno importati anche gli oggetti dello spazio carta - + if this is unchecked, texts/mtexts won't be imported Se questa opzione non è spuntata, i text/mtext non saranno importati - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. Esportando le spline in DXF, esse vengono trasformate in polilinee. Questo valore è la lunghezza massima di ciascun segmento della polilinea. Se impostato a 0, l'intera spline sarà trattata come un unico segmento retto. @@ -940,7 +951,7 @@ Può essere un nome di carattere come "Arial", uno stile predefinito come "sans" Check this if you want the areas (3D faces) to be imported too. - Spuntare questa opzione se si desidera che anche le aree (facce 3D) siano importate. + Spuntare questa opzione se si desidera importare anche le aree (facce 3D). @@ -953,7 +964,7 @@ Può essere un nome di carattere come "Arial", uno stile predefinito come "sans" Impostazioni generali - + Construction group name Nome del gruppo di costruzione @@ -969,22 +980,22 @@ Values with differences below this value will be treated as same. Questo è il valore utilizzato dalle funzioni che utilizzano una tolleranza. I valori con differenze al di sotto di questo valore saranno trattati come uguali. - + DXF format options Opzioni del formato DXF - + Check this if you want the non-named blocks (beginning with a *) to be imported too - Spuntare questa opzione se si desidera che anche i blocchi senza nome (che iniziano con *) vengano importati + Spuntare questa opzione se si desidera importare anche i blocchi senza nome (che iniziano con *) - + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... Se spuntato, freecad cercherà di congiungere in polilinee gli oggetti coincidenti. Attenzione, ciò può richiedere del tempo... - + Join geometry Unisci la geometria @@ -1006,17 +1017,17 @@ Values with differences below this value will be treated as same. Here you can specify a directory containing SVG files containing <pattern> definitions that can be added to the standard Draft hatch patterns - Qui è possibile specificare un repertorio con file SVG contenenti definizioni <pattern>, che possono venir aggiunti ai motivi di campitura standard d'Abbozzo + Qui è possibile specificare un repertorio con file SVG contenenti definizioni <pattern>, che possono venir aggiunti ai motivi di campitura standard di Draft Draft interface mode - Modalità d'interfaccia Abbozzo + Modalità d'interfaccia Draft This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction - Questa è la modalità di Interfaccia Utente con cui funzionerà il modulo Abbozzo: la modalità "barra strumenti" porrà tutte le impostazioni dell'Abbozzo in una barra degli strumenti separata, mentre la modalità "barra attività" utilizzerà il sistema di Visualizzazione d'attività di FreeCAD per tutte le sue interazioni con l'utente + Questa è la modalità in cui funzionerà l'Interfaccia Utente del modulo Draft per tutte le sue interazioni con l'utente: la modalità "barra strumenti" porrà tutte le impostazioni di Draft in barre degli strumenti indipendenti, mentre la modalità "barra attività" utilizzerà il sistema Vista delle attività di FreeCAD @@ -1026,7 +1037,7 @@ Values with differences below this value will be treated as same. Taskview - Finestra attività + Finestra Azioni @@ -1084,32 +1095,32 @@ Values with differences below this value will be treated as same. Seleziona gli oggetti di base dopo la copia - + If checked, a grid will appear when drawing - Se spuntato, durante il disegno apparirà una griglia + Se spuntato, durante il disegno appare una griglia - + Use grid Usa griglia - + Grid spacing Spaziatura della griglia - + The spacing between each grid line - La spaziatura tra ogni riga della griglia + La spaziatura tra le linee della griglia - + Main lines every Linee principali ogni - + Mainlines will be drawn thicker. Specify here how many squares between mainlines. Le linee principali saranno disegnate più spesse. Specificare qui il numero di quadrati tra linee principali. @@ -1126,7 +1137,7 @@ Values with differences below this value will be treated as same. This is the orientation of the dimension texts when those dimensions are vertical. Default is left, which is the ISO standard. - Questo è l'orientamento dei testi delle quotature, quando esse sono verticali. Predefinito è a sinistra, come per lo standard ISO. + Questo è l'orientamento dei testi delle quotature, quando esse sono verticali. Predefinito è a sinistra, secondo lo standard ISO. @@ -1139,29 +1150,29 @@ Values with differences below this value will be treated as same. Destra - + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable - se questa opzione è spuntata, oggetti appartenenti a stessi livelli saranno uniti in Blocchi di Abbozzo, aumentandone la velocità di visualizzazione, ma rendendoli meno facilmente modificabili + Se questa opzione è spuntata, gli oggetti dello stesso livello sono uniti in Blocchi di Draft, aumentandone la velocità di visualizzazione, ma rendendoli meno facilmente modificabili - + Group layers into blocks Raggruppa livelli in blocchi - + If this is checked, all objects containing faces will be exported as 3d polyfaces - Se questa opzione è spuntata, tutti gli oggetti contenenti facce saranno esportati come multifacce 3D + Se questa opzione è spuntata, tutti gli oggetti contenenti facce sono esportati come multifacce 3D - + Export 3D objects as polyface meshes Esporta gli oggetti 3D come maglie poligonali multifaccia If this is checked, the Draft workbench won't appear. Useful since all of the Draft tools are also in the Arch workbench. - Se questo è selezionato, l'ambiente Draft non sarà visualizzato. Utile dal momento che tutti gli strumenti Draft sono disponibili anche nell'ambiente Arch. + Se questo è selezionato, l'ambiente Draft non è visualizzato. Utile dal momento che tutti gli strumenti Draft sono disponibili anche nell'ambiente Arch. @@ -1171,7 +1182,7 @@ Values with differences below this value will be treated as same. If checked, the Snap toolbar will be shown whenever you use snapping - Se selezionato, la barra degli strumenti Snap sarà mostrata ogni volta che si usa lo snap + Se è selezionato, ogni volta che si usa l'aggancio viene mostrata la barra degli strumenti Snap @@ -1186,45 +1197,45 @@ Values with differences below this value will be treated as same. if checked, a widget indicating the current working plane orientation appears during drawing operations - Se selezionato, viene visualizzatao un widget che indica l'orientamento del piano lavoro corrente durante le operazioni di disegno + Se selezionato, viene visualizzatao un widget che indica l'orientamento del piano di lavoro corrente durante le operazioni di disegno Show Working Plane tracker - Visualizza piano lavoro tracciante + Visualizza la traccia del piano di lavoro - + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command - Se selezionato, la griglia Draft sarà sempre visibile quando l'ambiente Draft è attivo. In caso contrario solo quando si utilizza un comando + Se selezionato, quando l'ambiente Draft è attivo la griglia Draft è sempre visibile. In caso contrario solo quando si utilizza un suo comando - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document Se questo è selezionato, i testi importati avranno la dimensione standard Draft, invece della dimensione che hanno nel documento DXF - + Use standard font size for texts Usa dimensioni di font standard per testi - + If this is checked, hatches will be converted into simple wires - Se questo è selezionato, i tratteggi saranno convertiti in semplici wire + Se questo è selezionato, i tratteggi sono convertiti in semplici wire - + Import hatch boundaries as wires Importa i confini del tratteggio come wire - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width - Se questo è selezionato, quando le polilinee hanno una larghezza definita, saranno disegnate come wire chiusi con la larghezza corretta + Se questo è selezionato, quando le polilinee hanno una larghezza definita, sono disegnate come wire chiusi con la larghezza corretta - + Render polylines with width Disegna le polilinee con spessore @@ -1246,7 +1257,7 @@ Values with differences below this value will be treated as same. When exporting SVG views, make all white linework appear in black, for better readability against white backgrounds - Quando si esportano viste SVG, rendere nere tutte le linee bianche, per una migliore leggibilità su sfondi bianchi + Quando si esportano viste SVG, rende nere tutte le linee bianche, per una migliore leggibilità su sfondi bianchi @@ -1256,17 +1267,17 @@ Values with differences below this value will be treated as same. When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. - Quando questo è selezionato, gli strumenti Draft creeranno parti primitive invece di oggetti Draft, quando possibile. + Quando questo è selezionato, gli strumenti Draft creano primitive di Part invece di oggetti Draft, se è possibile. Use Part Primitives when available - Udare le parti primitive quando disponibili + Usa le primitive di Part quando disponibili Snapping - Snapping + Aggancio @@ -1279,67 +1290,67 @@ Values with differences below this value will be treated as same. Snap sempre (disabilita snap mod) - + Construction geometry Geometria di costruzione - + Construction geometry color Colore geometria di costruzione - + Import Importa - + texts and dimensions testi e quotature - + points punti - + layouts layout - + *blocks *blocchi - + If this is checked, the exported objects will be projected to reflect the current view direction - Se questo è selezionato, gli oggetti esportati verranno proiettati per riflettere la direzione della vista corrente + Se questo è selezionato, gli oggetti esportati sono proiettati secondo la direzione della vista corrente - + Project exported objects along current view direction Proietta gli oggetti esportati lungo la direzione di visualizzazione corrente - + Ellipse export is badly supported. Use this to export them as polylines instead. - L'esportazione dell'ellisse non è supportata completamente. Usatela per esportare come polilinee. + L'esportazione dell'ellisse non è supportata completamente. Usate questo per esportarla come polilinea. - + DWG format options Opzioni formato DWG - + Path to Teigha File Converter Percorso del convertitore File Teigha - + The path to your Teigha File Converter executable Il percorso dell'eseguibile del convertitore File Teigha @@ -1371,7 +1382,7 @@ Values with differences below this value will be treated as same. Draft classic style - Stile classico draft + Stile classico Draft @@ -1394,7 +1405,7 @@ Values with differences below this value will be treated as same. Griglia - + Always show the grid Mostra sempre la griglia @@ -1424,52 +1435,37 @@ Values with differences below this value will be treated as same. dimensione - + Dimensions arrows Frecce delle quotature - + style stile - + Dot - Dot + Punto - + Circle Cerchio - + Arrow Freccia - + The default size of arrows La dimensione predefinita delle frecce - - Dimensions lines - Linee delle quotature - - - - text above - testo sopra - - - - text inside - testo all'interno - - - + The default size of dimensions extension lines La dimensione predefinita delle linee di estensione delle quotature @@ -1491,7 +1487,7 @@ Values with differences below this value will be treated as same. The space between the dimension line and the dimension text - Lo spazio tra la linea di quotatura e il testo di quotatura + Lo spazio tra la linea di quota e il suo testo @@ -1509,80 +1505,55 @@ Values with differences below this value will be treated as same. Riempe gli oggetti con le facce quando possibile - - DXF / DWG options - Opzioni DXF / DWG - - - + Create Crea - - If thi sis checked, only standard Part objects will be created (fastest) - Se selezionato, saranno creati solo oggetti parte standard (più veloce) - - - + simple Part shapes - simple Part shapes + forme semplici di Parte - + If this is checked, parametric Draft objects will be created whenever possible - Se selezionato, gli oggetti Draft parametrici saranno creati quando possibile + Se selezionato, e quando possibile, sono creati oggetti Draft parametrici - + Draft objects Oggetti Draft - + If this is checked, sketches will be created whenever possible - Se selezionato, saranno creati sketch quando possibile + Se selezionato, sono creati Schizzi, quando possibile - + Sketches Sketch - + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. - Se selezionato, i colori saranno recuperati dagli oggetti DXF quando possibile. Altrimenti saranno applicati i colori predefiniti. + Se selezionato, quando possibile, i colori sono recuperati dagli oggetti DXF, altrimenti sono applicati i colori predefiniti. - + Get original colors from the DXF file Ottieni colori originali da file DXF - - If this is checked, DXF layers will be imported as Draft layers - Se selezionato, i livelli DXF saranno importati come livelli Draft - - - - Use Draft Layers - Usa livelli Draft - - - + Treat ellipses and splines as polylines Tratta ellissi e spline come polilinee - + Max Spline Segment: Massimo segmento Spline: - - - SVG / OCA options - Opzioni SVG / OCA - Export style @@ -1598,21 +1569,146 @@ Values with differences below this value will be treated as same. Show the unit suffix in dimensions Visualizza il suffisso unità nelle dimensioni + + + DXF / DWG + DXF / DWG + + + + Automatic update + Aggiornamento automatico + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + <html><head/> <body><p>Attivandolo, si permette a FreeCAD di scaricare e aggiornare i</p> <p>componenti necessari per importare e esportare in DXF. Si può anche farlo</p> <p>manualmente, da https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + + + + Allow FreeCAD to automatically download and update the DXF libraries + Consente a FreeCAD di scaricare e aggiornare automaticamente le librerie DXF + + + + If this is checked, only standard Part objects will be created (fastest) + Se selezionato, sono creati solo oggetti standard di Part (più veloce) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + Se viene selezionata questa casella, i layers dei DXF sono importati come VisGroups di Draft + + + + Use VisGroups + Utilizza VisGroups + + + + mm + mm + + + + SVG / OCA + SVG / OCA + + + + Grid size + Dimensioni della griglia + + + + the number of horizontal or vertical lines of the grid + il numero di linee orizzontali o verticali della griglia + + + + lines + linee + + + + Dimensions + Dimensioni + + + + display mode + modalità di visualizzazione + + + + text above (2D) + testo sopra (2D) + + + + text inside (3D) + testo all'interno (3D) + + + + extension lines size + dimensione delle linee di estensione + + + + Drawing views + Viste di Disegno + + + + Dashed line definition + Definizione della linea a tratti + + + + A SVG linestyle definition + Una definizione di stile delle linee nel formato SVG + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + Definizione della linea tratto-punto + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Definizione della linea punteggiata + + + + 0.02,0.02 + 0.02,0.02 + Workbench - + Draft Snap Snap Draft - + Draft creation tools Strumenti di creazione Draft - + Draft modification tools Strumenti di modifica Draft @@ -1620,635 +1716,598 @@ Values with differences below this value will be treated as same. draft - + Draft Command Bar Barra dei comandi Draft - + active command: comando attivo: - + None Nessuno - + Active Draft command Comando Abbozzo attivo - + X coordinate of next point Coordinata X del prossimo punto - + X X - + Y Y - + Z Z - + Y coordinate of next point Coordinata Y del prossimo punto - + Z coordinate of next point Coordinata Z del prossimo punto - + Radius Raggio - + Radius of Circle Raggio del Cerchio - + &Relative &Relativo - + Coordinates relative to last point or absolute (SPACE) Coordinate relative all'ultimo punto o assolute (BARRA SPAZIATRICE) - + F&illed P&ieno - + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) - Spunta questa opzione se l'oggetto dovrebbe apparire "a facce piene", altrimenti esso apparirà "a reticolo" (i) + Spuntare questa opzione se l'oggetto deve apparire "a facce piene", altrimenti esso appare "a reticolo" (i) - + &Finish &Finisci - + Finishes the current drawing or editing operation (F) Finisce il disegno corrente o l'operazione di modifica (F) - + If checked, command will not finish until you press the command button again - Se spuntato, il comando non terminerà finché non si preme nuovamente il pulsante di comando + Se spuntato, il comando non termina finché non si preme nuovamente il pulsante di comando - - &Continue - &Continua - - - + If checked, an OCC-style offset will be performed instead of the classic offset - Se spuntato, verrà eseguito un offset in stile OCC invece dell'offset classico + Se spuntato, viene eseguito un offset in stile OCC invece dell'offset classico - + &OCC-style offset &Offset in stile OCC - + Add points to the current object Aggiungi punti all'oggetto corrente - + Remove points from the current object Rimuovi punti dall'oggetto corrente - + Make Bezier node sharp - Make Bezier node sharp + Crea nodo Bezier spigoloso - + Make Bezier node tangent - Rendi tangente il nodo Bezier + Crea nodo Bezier tangente - + Make Bezier node symmetric - Rendi simmetrico il nodo Bezier + Nodo Bezier simmetrico - + &Undo &Annulla - + Undo the last segment (CTRL+Z) Annulla l'ultimo segmento (CTRL+Z) - + &Close &Chiudi - + Finishes and closes the current line (C) Termina e chiude la linea corrente (C) - + &Wipe &Cancella - + Wipes the existing segments of this line and starts again from the last point (W) Cancella i segmenti esistenti di questa linea e ricomincia dall'ultimo punto (C) - + Number of sides Numero di lati - + Offset Offset - + XY XY - + Select XY plane Seleziona il piano XY - + XZ XZ - + Select XZ plane Seleziona il piano XZ - + YZ YZ - + Select YZ plane Seleziona il piano YZ - + View Vista - + Select plane perpendicular to the current view Seleziona il piano perpendicolare alla vista corrente - + Do not project points to a drawing plane Non proiettare i punti su un piano di disegno - + &Copy &Copia - + If checked, objects will be copied instead of moved (C) Se selezionato, gli oggetti saranno copiati invece che spostati (C) - + Text string to draw - Text string to draw + Stringa di testo da disegnare - + String Stringa - + Height of text Altezza del testo - + Height Altezza - + Intercharacter spacing Spaziatura intercarattere - + Tracking - Tracking + Crenatura - + Full path to font file: Percorso completo del file di font: - + Open a FileChooser for font file - Apre un finestra di selezione per file di font + Apre un finestra per selezionare un file di font - + Set/unset a working plane Imposta/rimuovi un piano di lavoro - + Line Color Colore linea - + Face Color Colore faccia - + Line Width Spessore linea - + Font Size Dimensione carattere - + Apply to selected objects Applica agli oggetti selezionati - + Toggles Construction Mode Attiva/Disattiva Modalità Costruzione - + Select Plane Seleziona il piano - + Line Linea - + DWire DWire - + Circle Cerchio - + Center X Centro X - + Arc Arco - + Point Punto - + Distance Distanza - + Trim Taglia - + Pick Object Scegli Oggetto - + Edit Modifica - + Global X X globale - + Global Y Y globale - + Global Z Z globale - + Local X X locale - + Local Y Y locale - + Local Z Z locale - + Invalid Size value. Using 200.0. - Invalid Size value. Using 200.0. + Dimensione non valida. Uso 200.0. - + Invalid Tracking value. Using 0. - Invalid Tracking value. Using 0. + Valore di crenatura non valido. Utilizzato 0. - + Please enter a text string. Inserire una stringa di testo. - + Select a Font file Seleziona un file di font - + Please enter a font file. Inserire un file di font. - + Draft.makeBSpline: not enough points - Draft.makeBSpline: not enough points - + Draft.makeBSpline: numero di punti insufficiente - + Draft.makeBSpline: Equal endpoints forced Closed - Draft.makeBSpline: Equal endpoints forced Closed + Draft.makeBSpline : I punti finali sono uguali. Chiusura forzata - + Draft.makeBSpline: Invalid pointslist - Draft.makeBSpline: Invalid pointslist - + Draft.makeBSpline: elenco dei punti non valido - + Found groups: closing each open object inside Trovati gruppi: chiusura di ogni oggetto aperto - + Found mesh(es): turning into Part shapes Trovate mesh: trasformazione in forme - + Found 1 solidificable object: solidifying it Trovato 1 oggetto solidificable: solidificazione - + Found 2 objects: fusing them Trovati 2 oggetti: fusione degli stessi - - Found several objects: making a shell - - Trovati diversi oggetti: creazione di un guscio - - - - Found several coplanar objects or faces: making one face - - Trovati diversi oggetti o facce complanari: creazione di una faccia - - - + Found 1 non-parametric objects: draftifying it Trovato 1 oggetto non parametrico: creazione di un abbozzo dallo stesso - - Found 1 closed sketch object: making a face from it - - Trovato 1 oggetto schizzo chiuso: creazione di una faccia dallo stesso - - - - Found closed wires: making faces - - Trovati wire chiusi: creazione di facce - - - + Found 1 open wire: closing it Trovata 1 polilinea aperta: chiusura della stessa - + Found several open wires: joining them Trovati diversi wire aperti: creazione di un'unione - + Found several edges: wiring them Trovati numerosi lati: connessione degli stessi - - Found several non-treatable objects: making compound - - Trovato diversi oggetti non trattabili: creazione composizione - - - + Unable to upgrade these objects. Impossibile promuovere questi oggetti. - + Found 1 block: exploding it Trovato 1 blocco: esplosione - + Found 1 parametric object: breaking its dependencies Trovato 1 oggetto parametrico: rottura delle sue dipendenze - + Found 2 objects: subtracting them Trovati 2 oggetti: sottrazione degli stessi - + Found several faces: splitting them Trovate diverse facce: separazione delle stesse - + Found several objects: subtracting them from the first one Trovati diversi oggetti: sottrazione dal primo - + Found 1 face: extracting its wires Trovata 1 faccia: estrazione delle sue polilinee - + Found only wires: extracting their edges Trovate solo polilinee: estrazione dei rispettivi lati - + No more downgrade possible Downgrade non più possibile - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. + _BSpline.createGeometry : chiusa con lo stesso primo/ultimo punto. Geometria non aggiornata. - + Pick a face to define the drawing plane Scegliere una faccia per definire il piano di disegno - + Pick first point: Scegli primo punto: - + Create Line Crea linea - + Create DWire Crea DWire - + DWire has been closed Il DWire è stato chiuso - + Last point has been removed L'ultimo punto è stato rimosso - + Pick next point: Scegli prossimo punto: - + Pick next point, or (F)inish or (C)lose: Scegli punto successivo, o (F)inisci o (C)hiudi: - + BSpline BSpline @@ -2259,383 +2318,375 @@ Values with differences below this value will be treated as same. La Spline è stata chiusa - + Create BSpline Crea BSpline BezCurve - BezCurve + Curva di Bezier - + Bezier curve has been closed - Bezier curve has been closed - + La curva di Bézier è stata chiusa automaticamente - + Create BezCurve - Create BezCurve + Crea una curva di Bezier - + Rectangle Rettangolo - + Create Plane - Crea piano + Crea Piano - + Create Rectangle Crea Rettangolo - + Pick opposite point: Scegli punto opposto: - + Pick center point: Scegli punto centrale: - + Pick radius: Scegli raggio: - + Pick start angle: Scegli angolo iniziale: - + Pick aperture: Scegli apertura: - + Create Circle Crea Cerchio - + Create Arc Crea Arco - + Start Angle Angolo iniziale - + Aperture Apertura - + Aperture angle: Angolo di apertura: - + Polygon Poligono - + Create Polygon Crea Poligono - + Ellipse Ellisse - + Create Ellipse - Crea ellisse + Crea Ellisse - + Text Testo - + Pick location point: Scegli punto di localizzazione: - + Create Text Crea Testo - + Dimension Quotatura - + Create Dimension Crea Quotatura - + Edges don't intersect! I lati non si intersecano! - + ShapeString - ShapeString + Forma da Stringa - + Pick ShapeString location point: - Pick ShapeString location point: + Scegli il punto per posizionare la Forma : - + Create ShapeString - Create ShapeString + Crea una Forma da una Stringa - + Move Sposta - + Select an object to move Seleziona un oggetto da spostare - + Pick start point: Scegli punto iniziale: - + Copy Copia - + Pick end point: Scegli punto finale: - + Change Style Cambia stile - + Select an object to rotate Selezionare un oggetto da ruotare - + Pick rotation center: Scegli centro di rotazione: - + Rotate Ruota - + Pick base angle: Scegli angolo di base: - + Pick rotation angle: Scegli angolo di rotazione: - + Select an object to offset Seleziona un oggetto su cui effettuare l'offset - + Offset only works on one object at a time Offset funziona solo su un oggetto alla volta - + Cannot offset this object type - Non è possibile creare offset con questo tipo di oggetto + Non è possibile creare un offset con questo tipo di oggetto - + Pick distance: Scegli distanza: - + Select an object to upgrade Seleziona un oggetto da promuovere - + Upgrade - Promuovere + Promuovi - + Downgrade - Retrocedere + Retrocedi - - Select an object to trim/extend - - Seleziona un oggetto da troncare/estendere - - - - + Scale Scala - + Select an object to scale Seleziona un oggetto da scalare - + Pick base point: Scegli punto base: - + Pick scale factor: Scegli fattore di scala: - + Select an object to project Seleziona un oggetto da proiettare - + Select a Draft object to edit Selezionare un oggetto Draft da modificare - + This object type is not editable Questo tipo di oggetto non è modificabile - + Active object must have more than two points/nodes L'oggetto attivo deve avere più di due punti/nodi - + Selection is not a Knot La selezione non è un nodo - + Endpoint of BezCurve can't be smoothed - Endpoint of BezCurve can't be smoothed + Un punto finale di una curva di Bezier non può essere levigato - + Select an object to convert Seleziona un oggetto da convertire - + Select an object to array Seleziona un oggetto per la serie - + Please select base and path objects Selezionare gli oggetti di base e di percorso - + Create Point Crea punto - + Select an object to clone Seleziona un oggetto da clonare - + Select face(s) on existing object(s) Selezionare facce sugli oggetti esistenti @@ -2647,41 +2698,212 @@ Values with differences below this value will be treated as same. Convertitore di File Teigha non trovato, quindi il supporto ai file DWG è disabilitato. - - Installed Macros - Macro installate - - - + &Draft &Draft - + Utilities Utilità - + Wire tools Strumenti Polilinea - + Snapping - Snapping + Aggancio - + Found 1 multi-solids compound: exploding it - Found 1 multi-solids compound: exploding it + è stato trovato un solido multi-componente: scomporlo - + Sides Lati + + + BSplines and Bezier curves are not supported by this tool + Le BSplines e le curve di Bezier non sono supportate da questo strumento + + + + The given object is not planar and cannot be converted into a sketch. + L'oggetto non è piano e non può essere convertito in uno schizzo. + + + + Found several objects: creating a shell + + Trovati diversi oggetti: creazione di un guscio + + + + + Found several coplanar objects or faces: creating one face + + Trovati diversi oggetti o facce complanari: creazione di una faccia + + + + + Found 1 linear object: converting to line + + Trovato 1 oggetto lineare: conversione in linea + + + + + Found 1 closed sketch object: creating a face from it + + Trovato 1 oggetto schizzo chiuso: creazione di una faccia da esso + + + + + Found closed wires: creating faces + + Contorni chiusi trovati: creazione di facce + + + + + Found several non-treatable objects: creating compound + + Trovati diversi oggetti non trattabili: creazione di composti + + + + + Length + Lunghezza + + + + Angle + Angolo + + + + Length of current segment + Lunghezza del segmento corrente + + + + Angle of current segment + Angolo del segmento corrente + + + + Check this to lock the current angle (l) + Seleziona questa casella per bloccare l'angolo corrente (l) + + + + Con&tinue + Con&tinua + + + + &Select edge + & Seleziona bordo + + + + Selects an existing edge to be measured by this dimension (E) + Seleziona un bordo esistente da misurare in questa quotatura (E) + + + + Auto + Auto + + + + Sorry, offset of Bezier curves is currently still not supported + + Siamo spiacenti, l'offset delle curve di Bézier non è ancora supportato + + + + + Convert to Sketch + Convertire in schizzo + + + + Convert to Draft + Convertire in Draft + + + + Convert + Converti + + + + Array + Matrice + + + + Select object(s) to trim/extend + + Selezionare l'oggetto(i) da accorciare/estendere + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + Impossibile tagliare questi oggetti, sono supportati solo polilinee e archi di Draft + + + + + Unable to trim these objects, too many wires + + Impossibile tagliare questi oggetti, troppi contorni + + + + + These objects don't intersect + + Questi oggetti non si intersecano + + + + + Too many intersection points + + Troppi punti di intersezione + + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + In questo sistema non sono state trovate le librerie di Importazione + e Esportazione DXF necessarie a FreeCAD per gestire il formato DXF. + Si prega di abilitare FreeCAD a scaricare queste librerie: + 1 - Caricare l'ambiente Draft + 2 - Menu Modifica > Preferenze > Import-Export > DXF > consentire i download +Oppure scaricare manualmente queste librerie, come è spiegato in +https://github.com/yorikvanhavre/Draft-dxf-importer + diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.qm b/src/Mod/Draft/Resources/translations/Draft_ja.qm index f3ea8b2fed..6fd0f95282 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ja.qm and b/src/Mod/Draft/Resources/translations/Draft_ja.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.ts b/src/Mod/Draft/Resources/translations/Draft_ja.ts index 0490546a30..0dd2bf8049 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ja.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ja.ts @@ -1,15 +1,27 @@ + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + DXFライブラリのダウンロードに失敗しました。 +手動で https://github.com/yorikvanhavre/Draft-dxf-importer からダウンロードして、マクロフォルダに設置してください。 + + Draft_AddPoint - + Add Point 点の追加 - + Adds a point to an existing wire/bspline 既存の連線またはBスプライン曲線に点を追加します。 @@ -17,12 +29,12 @@ Draft_AddToGroup - + Add to group... グループに追加... - + Adds the selected object(s) to an existing group 選択したオブジェクトを既存のグループに追加する @@ -30,12 +42,12 @@ Draft_ApplyStyle - + Apply Current Style 現在のスタイルを適用する - + Applies current line width and color to selected objects 現在の線の幅と色を選択したオブジェクトに適用 @@ -43,12 +55,12 @@ Draft_Arc - + Arc 円弧 - + Creates an arc. CTRL to snap, SHIFT to constrain 円弧を作成、 [Ctrl]でスナップ、[Shift]で拘束 @@ -56,12 +68,12 @@ Draft_Array - + Array 配列 - + Creates a polar or rectangular array from a selected object 選択したオブジェクトから円形または矩形の配列を作成します @@ -69,12 +81,12 @@ Draft_BSpline - + B-Spline B-スプライン曲線 - + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain 複数点からなるBスプライン曲線を作成します。[Ctrl]でスナップ、[Shift]で拘束。 @@ -95,12 +107,12 @@ Draft_Circle - + Circle 円 - + Creates a circle. CTRL to snap, ALT to select tangent objects 円を作成します。[Ctrl]でスナップ、[Alt]で接するオブジェクトを選択 @@ -108,12 +120,12 @@ Draft_Clone - + Clone 複製 - + Clones the selected object(s) 選択されたオブジェクト（複数可）の複製を作成 @@ -121,12 +133,12 @@ Draft_CloseLine - + Close Line 閉じた線 - + Closes the line being drawn 製図中の線を閉じます @@ -134,12 +146,12 @@ Draft_DelPoint - + Remove Point 点の削除 - + Removes a point from an existing wire or bspline 既存の連線またはBスプライン曲線から点を削除します。 @@ -147,12 +159,12 @@ Draft_Dimension - + Dimension 寸法 - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment 寸法を記入します。[Ctrl]でスナップ、[Shift]で拘束、[Alt]でセグメントを選択 @@ -160,12 +172,12 @@ Draft_Downgrade - + Downgrade ダウングレード - + Explodes the selected objects into simpler objects, or subtract faces 選択されているオブジェクトをより単純な形状にエクスポート、または面を減算します @@ -173,7 +185,7 @@ Draft_Draft2Sketch - + Draft to Sketch ドラフトからスケッチへ @@ -181,12 +193,12 @@ Draft_Drawing - + Drawing 図面 - + Puts the selected objects on a Drawing sheet. 選択されたオブジェクトを図面上に配置 @@ -194,12 +206,12 @@ Draft_Edit - + Edit 編集 - + Edits the active object アクティブなオブジェクトを編集します。 @@ -207,12 +219,12 @@ Draft_Ellipse - + Ellipse 楕円 - + Creates an ellipse. CTRL to snap 楕円を作成します。[Ctrl]でスナップ。 @@ -220,25 +232,25 @@ Draft_Facebinder - + Facebinder - Facebinder + フェイスバインダー - + Creates a facebinder object from selected face(s) - Creates a facebinder object from selected face(s) + 選択された面(複数可)からフェイスバインダー・オブジェクトを作成 Draft_FinishLine - + Finish line フィニッシュ ライン - + Finishes a line without closing it 線を閉じずに終了します @@ -246,51 +258,38 @@ Draft_FlipDimension - + Flip Dimension - Flip Dimension + 寸法を反転 - + Flip the normal direction of a dimension - Flip the normal direction of a dimension + 寸法の法線方向を反転 Draft_Heal - + Heal 修復 - - Heal faultly Draft objects saved from an earlier FreeCAD version - 旧FreeCAD バージョンに保存されている、 欠陥のあるドラフト オブジェクトを修復します。 - - - - Draft_Layer - - - Layer - レイヤー - - - - Adds a layer - Adds a layer + + Heal faulty Draft objects saved from an earlier FreeCAD version + Heal faulty Draft objects saved from an earlier FreeCAD version Draft_Line - + Line 直線 - + Creates a 2-point line. CTRL to snap, SHIFT to constrain ２点を指定して線を作成します。[Ctrl]でスナップ、[Shift]で拘束 @@ -298,12 +297,12 @@ Draft_Move - + Move 移動 - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy 2点間で選択したオブジェクトを移動します。[Ctrl]でスナップ、[Shift]で拘束、[Alt]でコピー。 @@ -312,12 +311,12 @@ Draft_Offset - + Offset オフセット - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy アクティブなオブジェクトをオフセットします。[Ctrl]でスナップ、[Shift]で拘束、[Alt]でコピー。 @@ -325,12 +324,12 @@ Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. 選択したパスに沿って選択したオブジェクトのコピーを作成します。 @@ -338,12 +337,12 @@ Draft_Point - + Point 点 - + Creates a point object 点を作成します。 @@ -351,12 +350,12 @@ Draft_Polygon - + Polygon 多角形 - + Creates a regular polygon. CTRL to snap, SHIFT to constrain 正多角形を作成します。[Ctrl]でスナップ、[Shift]で拘束。 @@ -364,12 +363,12 @@ Draft_Rectangle - + Rectangle 四角形 - + Creates a 2-point rectangle. CTRL to snap 2 点を指定し四角形を作成します。[Ctrl]でスナップ @@ -377,12 +376,12 @@ Draft_Rotate - + Rotate 回転 - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy 選択したオブジェクトを回転します。[Ctrl]でスナップ、[Shift]で拘束、[Alt]でコピー。 @@ -390,12 +389,12 @@ Draft_Scale - + Scale 拡大縮小 - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy 選択したオブジェクトを基準点を中心に拡大します。[Ctrl]でスナップ、[Shift]で拘束、[Alt]でコピー。 @@ -403,12 +402,12 @@ Draft_SelectGroup - + Select group グループを選択 - + Selects all objects with the same parents as this group このグループと同じ親を持つすべてのオブジェクトを選択します @@ -416,12 +415,12 @@ Draft_SelectPlane - + SelectPlane 面を選択する - + Select a working plane for geometry creation ジオメトリを作成する作業面を選択する @@ -429,17 +428,17 @@ Draft_Shape2DView - + Shape 2D view 2Dビュー形状 - + Creates Shape 2D views of selected objects 選択されているオブジェクトの2Dビュー形状を作成します - + Convert bidirectionally between Draft and Sketch objects ドラフトオブジェクトとスケッチオブジェクトを相互に変換します @@ -447,25 +446,25 @@ Draft_ShapeString - + Shape from text... - Shape from text... + テキストからシェイプへ... - + Creates text string in shapes. - Creates text string in shapes. + テキスト文字列をシェイプとして作成 Draft_ShowSnapBar - + Show Snap Bar スナップバーを表示 - + Shows Draft snap toolbar ドラフトスナップ ツールバーを表示 @@ -473,12 +472,12 @@ Draft_Snap_Angle - + Angles - Angles + 角度 - + Snaps to 45 and 90 degrees points on arcs and circles 円弧や円上の点を、45度および90度にスナップさせる @@ -486,181 +485,181 @@ Draft_Snap_Center - + Center - Center + 中心 - + Snaps to center of circles and arcs - Snaps to center of circles and arcs + 円、円弧の中心にスナップ Draft_Snap_Dimensions - + Dimensions 寸法 - + Shows temporary dimensions when snapping to Arch objects - Shows temporary dimensions when snapping to Arch objects + Archオブジェクトにスナップする場合は仮寸法を表示 Draft_Snap_Endpoint - + Endpoint - Endpoint + 端点 - + Snaps to endpoints of edges - Snaps to endpoints of edges + エッジの端点にスナップ Draft_Snap_Extension - + Extension - Extension + 延長線上 - + Snaps to extension of edges - Snaps to extension of edges + エッジの延長にスナップ Draft_Snap_Grid - + Grid グリッド - + Snaps to grid points - Snaps to grid points + グリッド点にスナップ Draft_Snap_Intersection - + Intersection 共通集合 - + Snaps to edges intersections - Snaps to edges intersections + エッジの交点にスナップ Draft_Snap_Lock - + Toggle On/Off - Toggle On/Off + オン/オフを切り替え - + Activates/deactivates all snap tools at once - Activates/deactivates all snap tools at once + 全てのスナップツールを同時にアクティブ化/非アクティブ化 Draft_Snap_Midpoint - + Midpoint - Midpoint + 中点 - + Snaps to midpoints of edges - Snaps to midpoints of edges + エッジの中点にスナップ Draft_Snap_Near - + Nearest - Nearest + 最近接 - + Snaps to nearest point on edges - Snaps to nearest point on edges + エッジ上の最も近い点にスナップ Draft_Snap_Ortho - + Ortho - Ortho + 正射投影 - + Snaps to orthogonal and 45 degrees directions - Snaps to orthogonal and 45 degrees directions + ４５度の方向でスナップさせる Draft_Snap_Parallel - + Parallel - Parallel + 平行 - + Snaps to parallel directions of edges - Snaps to parallel directions of edges + エッジの平行方向にスナップ Draft_Snap_Perpendicular - + Perpendicular - Perpendicular + 垂直 - + Snaps to perpendicular points on edges - Snaps to perpendicular points on edges + エッジ上の垂直点にスナップ Draft_Snap_WorkingPlane - + Working Plane - Working Plane + 作業平面 - + Restricts the snapped point to the current working plane - Restricts the snapped point to the current working plane + スナップされる点を現在の作業平面に制限 Draft_Text - + Text テキスト - + Creates an annotation. CTRL to snap 注釈を作成します。[Ctrl]でスナップ @@ -668,12 +667,12 @@ Draft_ToggleConstructionMode - + Toggle construcion Mode コンストラクションモードを切り替える - + Toggles the Construction Mode for next objects. 次のオブジェクトのコンストラクションモードを切り替えます。 @@ -681,25 +680,25 @@ Draft_ToggleContinueMode - + Toggle Continue Mode - Toggle Continue Mode + 続行モードに切り替え - + Toggles the Continue Mode for next commands. - 継続モードを次のコマンドに切り替える + 次のコマンドを続行モードに切り替える。 Draft_ToggleDisplayMode - + Toggle display mode 表示モードを切り替える - + Swaps display mode of selected objects between wireframe and flatlines 選択したオブジェクトの表示モードを変更する @@ -707,25 +706,25 @@ Draft_ToggleGrid - + Toggle Grid グリッドの切り替え - - Toggles the Draft gid on/off + + Toggles the Draft grid on/off ドラフトのグリッドの オン/オフを切り替えます Draft_Trimex - + Trimex トリメックス - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts 選択したオブジェクトをトリムまたは延長するか、もしくは単一の面を押し出します。[Ctrl]でスナップ、[Shift]で現在のセグメントまたは垂直方向に拘束、[Alt]で反転 @@ -733,12 +732,12 @@ Draft_UndoLine - + Undo last segment 最後のセグメントを元に戻す - + Undoes the last drawn segment of the line being drawn 描画中の線で最後に描いたセグメントを元に戻す @@ -746,25 +745,38 @@ Draft_Upgrade - + Upgrade アップグレード - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces 選択したオブジェクトをひとつに結合、または閉じた連線を塗り潰された面に変換、または面を統合 + + Draft_VisGroup + + + VisGroup + VisGroup + + + + Adds a VisGroup + Adds a VisGroup + + Draft_Wire - + DWire Dワイヤー - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain 複数の頂点のドラフトワイヤー(Dワイヤー)を作成します。[Ctrl]でスナップ、[SHIFT]で拘束 @@ -772,12 +784,12 @@ Draft_WireToBSpline - + Wire to BSpline 連線をBスプライン曲線に変換 - + Converts between Wire and BSpline 連線とBスプライン曲線を相互変換 @@ -805,17 +817,17 @@ スナップシンボルのデフォルト色 - + This is the default color for objects being drawn while in construction mode. 構造モード中に描画されるオブジェクトのデフォルト色です。 - + This is the default group name for construction geometry 構造ジオメトリーのデフォルトグループ名です。 - + Construction 構造物 @@ -885,7 +897,7 @@ It can be a font name such as "Arial", a default style such as "sans", "serif" or "mono", or a family such as "Arial,Helvetica,sans" or a name with a style such as "Arial:Bold" - これは、すべてのドラフト・テキストと寸法のデフォルト（省略時の設定）フォント名です。「Arial」のようにフォント名、「sans」,「serif」、o「mono」のようなデフォルトのスタイル名、「Arial,Helvetica,sans」のような系統名、 「Arial:Bold」のようなフォント名とスタイル名を組み合わせた形で指定することができます。 + これは、すべてのドラフト・テキストと寸法に用いるデフォルト（省略時の設定）フォント名です。「Arial」のようなフォント名、「sans」,「serif」や「mono」のようなデフォルトのスタイル名、「Arial,Helvetica,sans」のような系統名、 「Arial:Bold」のようなフォント名とスタイル名を組み合わせた形で指定することができます。 @@ -918,17 +930,17 @@ such as "Arial:Bold" 標準の色と線幅 - + if this is checked, paper space objects will be imported too これがチェックされていると、ぺーバー空間オブジェクト[paper space object]もインポートされます。 - + if this is unchecked, texts/mtexts won't be imported チェックされていない場合、[texts/mtext]はインポートされません - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. スプラインをDXFへエクスポートする場合、それらはポリラインに変換されます。この値はポリラインの各セグメントの最大長です。0の場合、スプラインの全体が直線セグメントとして扱われます。 @@ -953,7 +965,7 @@ such as "Arial:Bold" 全般的な設定 - + Construction group name 構造グループ名 @@ -970,22 +982,22 @@ Values with differences below this value will be treated as same. これ以下の値の違いは、同じものとして扱われます。 - + DXF format options DXF形式のオプション - + Check this if you want the non-named blocks (beginning with a *) to be imported too (*で開始する)名称のないブロックもインポートしたい場合にはチェックしてください - + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... チェックした場合、FreeCADは一致するオブジェクトをワイヤーに結合しようとします。これには時間がかかる場合があります。 - + Join geometry ジオメトリを結合 @@ -1085,32 +1097,32 @@ Values with differences below this value will be treated as same. コピー後に元オブジェクトを選択 - + If checked, a grid will appear when drawing チェックした場合、製図中にグリッドが表示されます - + Use grid グリッドを使用 - + Grid spacing グリッド間隔 - + The spacing between each grid line グリッド線の間隔 - + Main lines every 主要線ごと - + Mainlines will be drawn thicker. Specify here how many squares between mainlines. 主線は太めに描画されます。主線間を何スクエアにするかここに指定してください。 @@ -1140,23 +1152,22 @@ Values with differences below this value will be treated as same. 右面図 - + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable - チェックされている場合、同じレイヤーのオブジェクトがドラフトブロックとして連結されます。 - if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable + チェックされている場合、同じレイヤーのオブジェクトがドラフトブロックとして連結されますが、高速表示をオンにすることで、より容易に編集できるようになります。 - + Group layers into blocks グループレイヤーをブロックへ - + If this is checked, all objects containing faces will be exported as 3d polyfaces これがチェックされている場合は、3Dポリフェイスとしての面を含むすべてのオブジェクトがエクスポートされます。 - + Export 3D objects as polyface meshes 3D オブジェクトをポリフェイスメッシュとしてエクスポートします。 @@ -1196,37 +1207,37 @@ Values with differences below this value will be treated as same. 作業平面の追跡ツールを表示 - + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command チェックされている場合、ドラフトワークベンチのアクティブ状態中に常にドラフトグリッドが表示されます。それ以外の場合はコマンド使用時のみです。 - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document チェックされている場合、インポートされたテキストサイズは、DXF 文書内にあるサイズから標準ドラフトで定義されたテキストサイズへ変換されます。 - + Use standard font size for texts 標準フォントサイズを使用 - + If this is checked, hatches will be converted into simple wires チェックされている場合、ハッチングは単純な線に変換されます。 - + Import hatch boundaries as wires ハッチング境界を線としてインポート - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width チェックされている場合、ポリラインに幅の定義があるときには適切な幅の閉じたワイヤーとしてレンダリングされます - + Render polylines with width 幅のあるポリラインをレンダリングします。 @@ -1258,102 +1269,102 @@ Values with differences below this value will be treated as same. When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. - When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. + ここをチェックすると、ドラフトツールはドラフトオブジェクトの代わりに利用可能な部品プリミティブを作成します。 Use Part Primitives when available - Use Part Primitives when available + 利用可能な場合はプリミティブ部品を使用 Snapping - Snapping + スナップ If this is checked, snapping is activated without the need to press the snap mod key - If this is checked, snapping is activated without the need to press the snap mod key + ここをチェックした場合、スナップはモディキーを押さなくてもスナップする Always snap (disable snap mod) - Always snap (disable snap mod) + 常にスナップ (スナップモードを無効にする) - + Construction geometry 拘束形状 - + Construction geometry color - Construction geometry color + 補助形状の色 - + Import - Import - - - - texts and dimensions - texts and dimensions - - - - points - points + インポート - layouts - layouts + texts and dimensions + テキストと寸法線 - + + points + ポイント + + + + layouts + レイアウト + + + *blocks *blocks - + If this is checked, the exported objects will be projected to reflect the current view direction - If this is checked, the exported objects will be projected to reflect the current view direction + チェックされている場合、エクスポートされるオブジェクトは現在のビュー方向を考慮して投影されます - + Project exported objects along current view direction - Project exported objects along current view direction + エクスポートされるオブジェクトを現在のビュー方向と平行に投影 - + Ellipse export is badly supported. Use this to export them as polylines instead. - Ellipse export is badly supported. Use this to export them as polylines instead. + 楕円のエクスポートは十分にサポートされていません。代わりにこれを使用してポリラインとしてエクスポートしてください。 - + DWG format options DWG形式のオプション - + Path to Teigha File Converter - Path to Teigha File Converter + Teighaファイルコンバーターのパス - + The path to your Teigha File Converter executable - The path to your Teigha File Converter executable + Teighaファイルコンバータ実行可能ファイルへのパス Visual settings - Visual settings + 表示の設定 Visual Settings - Visual Settings + 表示の設定 @@ -1363,32 +1374,32 @@ Values with differences below this value will be treated as same. Default line width - Default line width + 既定の線幅 Snap symbols style - Snap symbols style + スナップシンボルスタイル Draft classic style - Draft classic style + Draftクラシックスタイル Bitsnpieces style - Bitsnpieces style + Bitsnpiecesスタイル Color - Color + 色 Hatch patterns resolution - Hatch patterns resolution + ハッチングパターンの解像度 @@ -1396,19 +1407,19 @@ Values with differences below this value will be treated as same. グリッド - + Always show the grid - Always show the grid + 常にグリッドを表示 Texts and dimensions - Texts and dimensions + テキストと寸法線 Texts - Texts + テキスト @@ -1418,203 +1429,288 @@ Values with differences below this value will be treated as same. Internal font - Internal font + 内部フォント size - size + サイズ - + Dimensions arrows - Dimensions arrows + 寸法線の矢印 - + style - style + スタイル - + Dot - Dot + 点 - + Circle 円 - - - Arrow - Arrow - - - - The default size of arrows - The default size of arrows - - - - Dimensions lines - Dimensions lines - - - - text above - text above - - text inside - text inside + Arrow + 矢印 + The default size of arrows + 矢印のデフォルトサイズ + + + The default size of dimensions extension lines - The default size of dimensions extension lines + 寸法補助線のデフォルトサイズ Dimensions text - Dimensions text + 寸法のテキスト orientation - orientation + 配置 spacing - spacing + 間隔 The space between the dimension line and the dimension text - The space between the dimension line and the dimension text + 寸法線と寸法テキストの間隔 Default ShapeString Font File - Default ShapeString Font File + デフォルトの ShapeStringフォントファイル Select a font file - Select a font file + フォントファイルを選択 Fill objects with faces whenever possible - Fill objects with faces whenever possible + できるだけオブジェクトの面を塗りつぶす - - DXF / DWG options - DXF / DWG options - - - + Create 作成 - - If thi sis checked, only standard Part objects will be created (fastest) - If thi sis checked, only standard Part objects will be created (fastest) - - - + simple Part shapes - simple Part shapes + パート形状を単純化 - + If this is checked, parametric Draft objects will be created whenever possible - If this is checked, parametric Draft objects will be created whenever possible + ここをチェックされている場合、できる限りパラメトリックなドラフト・オブジェクトが作成されます - + Draft objects - Draft objects + ドラフトオブジェクト - + If this is checked, sketches will be created whenever possible - If this is checked, sketches will be created whenever possible + チェックされている場合、可能であれば常にスケッチが作成されます - + Sketches スケッチ - + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. - If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. + ここをチェックした場合、色は可能な限りDXFオブジェクトから読み出されます。それ以外の場合、デフォルトの色が適用されます。 - + Get original colors from the DXF file - Get original colors from the DXF file + DXFファイルからオリジナルの色を取得 - - If this is checked, DXF layers will be imported as Draft layers - If this is checked, DXF layers will be imported as Draft layers - - - - Use Draft Layers - Use Draft Layers - - - + Treat ellipses and splines as polylines - Treat ellipses and splines as polylines + 楕円およびスプラインをポリラインとして扱う - + Max Spline Segment: - Max Spline Segment: - - - - SVG / OCA options - SVG / OCA options + スプラインの最長線分： Export style - Export style + エクスポートスタイル Snapping settings - Snapping settings + スナップの設定 Show the unit suffix in dimensions - Show the unit suffix in dimensions + 寸法の単位サフィックスを表示する + + + + DXF / DWG + DXF/DWG + + + + Automatic update + 自動更新 + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + + + + Allow FreeCAD to automatically download and update the DXF libraries + Allow FreeCAD to automatically download and update the DXF libraries + + + + If this is checked, only standard Part objects will be created (fastest) + If this is checked, only standard Part objects will be created (fastest) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + If this is checked, DXF layers will be imported as Draft VisGroups + + + + Use VisGroups + Use VisGroups + + + + mm + mm + + + + SVG / OCA + SVG / OCA + + + + Grid size + グリッドサイズ + + + + the number of horizontal or vertical lines of the grid + the number of horizontal or vertical lines of the grid + + + + lines + lines + + + + Dimensions + 寸法 + + + + display mode + display mode + + + + text above (2D) + text above (2D) + + + + text inside (3D) + text inside (3D) + + + + extension lines size + extension lines size + + + + Drawing views + Drawing views + + + + Dashed line definition + Dashed line definition + + + + A SVG linestyle definition + A SVG linestyle definition + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + Dashdot line definition + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Dotted line definition + + + + 0.02,0.02 + 0.02,0.02 Workbench - + Draft Snap - Draft Snap + ドラフトスナップ - + Draft creation tools ドラフト作成ツール - + Draft modification tools ドラフト修正ツール @@ -1622,649 +1718,606 @@ Values with differences below this value will be treated as same. draft - + Draft Command Bar - Draft Command Bar + ドラフトコマンドバー - + active command: アクティブコマンド: - + None なし - + Active Draft command アクティブドラフトコマンド - + X coordinate of next point 次の点の X 座標 - + X X - + Y Y - + Z Z - + Y coordinate of next point 次の点の Y 座標 - + Z coordinate of next point 次の点の Z 座標 - + Radius 半径 - + Radius of Circle 円の半径 - + &Relative 相対 (&R) - + Coordinates relative to last point or absolute (SPACE) 最後の点からの相対座標、または絶対座標[スペース] - + F&illed 塗りつぶし (&I) - + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) チェックされている場合、オブジェクトは塗りつぶし表示されます。それ以外の場合、ワイヤーフレーム表示されます (i) - + &Finish 終了 (&F) - + Finishes the current drawing or editing operation (F) 現在の製図、または編集操作を終了します (F) - + If checked, command will not finish until you press the command button again チェックされている場合、再びコマンドボタンを押すまでコマンドが終了しなくなります - - &Continue - 続行 (&c) - - - + If checked, an OCC-style offset will be performed instead of the classic offset チェックされている場合、従来のオフセットの代わりにくOCC-スタイルのオフセットが行われます - + &OCC-style offset OCC スタイル オフセット (&O) - + Add points to the current object 現在のオブジェクトに点を追加します - + Remove points from the current object 現在のオブジェクトから点を削除します - + Make Bezier node sharp - Make Bezier node sharp + ベジエ曲線の頂点を鋭角にする - + Make Bezier node tangent - Make Bezier node tangent + ベジエ曲線の頂点を接線にする - + Make Bezier node symmetric - Make Bezier node symmetric + ベジエ曲線の頂点を対称にする - + &Undo 元に戻す（&U） - + Undo the last segment (CTRL+Z) 最後のセグメントを元に戻す (Ctrl+Z) - + &Close 閉じる (&C) - + Finishes and closes the current line (C) 現在の線を閉じて終了[C] - + &Wipe 消去 (&W) - + Wipes the existing segments of this line and starts again from the last point (W) 直線の既存の区間を消去して最後の点から再開します (W) - + Number of sides 辺の数 - + Offset オフセット - + XY XY - + Select XY plane XY 平面を選択 - + XZ XZ - + Select XZ plane XZ 平面を選択 - + YZ YZ - + Select YZ plane YZ 平面を選択 - + View 表示 - + Select plane perpendicular to the current view 現在のビューに垂直な面を選択する。 - + Do not project points to a drawing plane 描画平面に点を投影しないでください - + &Copy コピー (&C) - + If checked, objects will be copied instead of moved (C) チェックされている場合、オブジェクトは移動 (C) ではなくコピーされます。 - + Text string to draw - Text string to draw + 描画するテキスト文字列 - + String 文字列 - + Height of text - Height of text + テキストの高さ - + Height 高さ - + Intercharacter spacing - Intercharacter spacing + 文字間隔 - + Tracking - Tracking + トラッキング - + Full path to font file: - Full path to font file: + フォントファイルのフルパス: - + Open a FileChooser for font file - Open a FileChooser for font file + ファイル選択ダイアログを開いてフォントファイルを選択 - + Set/unset a working plane - Set/unset a working plane + 作業平面の設定/非設定 - + Line Color 線の色 - + Face Color 面の色 - + Line Width 線の幅 - + Font Size フォントサイズ - + Apply to selected objects 選択したオブジェクトに適用します。 - + Toggles Construction Mode 作成モードへの切り替え - + Select Plane 平面選択 - + Line 直線 - + DWire Dワイヤー - + Circle 円 - + Center X 中心X - + Arc 円弧 - + Point 点 - + Distance 距離 - + Trim トリム - + Pick Object オブジェクトを選択 - + Edit 編集 - + Global X - Global X + グローバル座標 X - + Global Y - Global Y + グローバル座標 Y - + Global Z - Global Z + グローバル座標 Z - + Local X - Local X + ローカル座標 X - + Local Y - Local Y + ローカル座標 Y - + Local Z - Local Z + ローカル座標 Z - + Invalid Size value. Using 200.0. - Invalid Size value. Using 200.0. + サイズの値が無効です。　200.0 を使ってください。 - + Invalid Tracking value. Using 0. - Invalid Tracking value. Using 0. + トラッキングの値が無効です。　0 を使ってください。 - + Please enter a text string. - Please enter a text string. + 文字を入力してください。 - + Select a Font file - Select a Font file + フォントファイルを選択 - + Please enter a font file. - Please enter a font file. + フォントファイルを入力してください。 - + Draft.makeBSpline: not enough points - Draft.makeBSpline: not enough points + Draft.makeBSpline: 点の数が不十分 - + Draft.makeBSpline: Equal endpoints forced Closed - Draft.makeBSpline: Equal endpoints forced Closed + Draft.makeBSpline: 等しい端点を強制的につなぐ - + Draft.makeBSpline: Invalid pointslist - Draft.makeBSpline: Invalid pointslist + Draft.makeBSpline: 無効な頂点リスト - + Found groups: closing each open object inside グループを見つけました: 内部の開いているオブジェクトを閉じます - + Found mesh(es): turning into Part shapes - Found mesh(es): turning into Part shapes + メッシュが見つかりました：パート形状へ変換します - + Found 1 solidificable object: solidifying it ソリッド化可能なオブジェクトが1つ見つかりました: ソリッド化します - + Found 2 objects: fusing them オブジェクトを2つ見つけました: 結合します - - Found several objects: making a shell - - Found several objects: making a shell - - - - - Found several coplanar objects or faces: making one face - - Found several coplanar objects or faces: making one face - - - - + Found 1 non-parametric objects: draftifying it 非パラメトリックなオブジェクトを1つ見つけました: 製図します - - Found 1 closed sketch object: making a face from it - - 閉じたスケッチオブジェクトを1つ見つけました: 面を作成します - - - - - Found closed wires: making faces - - Found closed wires: making faces - - - - + Found 1 open wire: closing it 開いたワイヤーを1つ見つけました: 閉じます - + Found several open wires: joining them - Found several open wires: joining them - + 複数の開いたワイヤーが見つかりました：結合する - + Found several edges: wiring them 複数のエッジを見つけました: ワイヤーとして結合します - - Found several non-treatable objects: making compound - - 複数の修復不能なオブジェクトを見つけました: 複合物を作成します - - - - + Unable to upgrade these objects. - Unable to upgrade these objects. - + これらのオブジェクトはアップグレードできません。 - + Found 1 block: exploding it - Found 1 block: exploding it - + ブロックが1つ見つかりました：このブロックを分解 - + Found 1 parametric object: breaking its dependencies パラメトリックなオブジェクトを1つ見つけました: 依存関係を破棄します - + Found 2 objects: subtracting them オブジェクトを2つ見つけました: 減算を行います - + Found several faces: splitting them 複数の面を見つけました: 分割します - + Found several objects: subtracting them from the first one 複数のオブジェクトを見つけました: 最初の1つから残りを減算します - + Found 1 face: extracting its wires 面を1つ見つけました: ワイヤーを抽出します - + Found only wires: extracting their edges ワイヤーのみ見つかりました: エッジを抽出します - + No more downgrade possible それ以上のダウングレードはできません - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. + _BSpline.createGeometry：最初/最後の点を一致させて曲線を閉じてください。ジオメトリーはは更新されていません。 - + Pick a face to define the drawing plane 描画面を選択する - + Pick first point: 最初の点を選択: - + Create Line 線分を作成 - + Create DWire DWire を作成します。 - + DWire has been closed DWire が閉じられました - + Last point has been removed 最後の点が取り除かれています。 - + Pick next point: 次の点を選択: - + Pick next point, or (F)inish or (C)lose: 次のポイントを選択、または完了(F)、閉じる(C)　 - + BSpline B-スプライン @@ -2275,7 +2328,7 @@ Values with differences below this value will be treated as same. スプラインは閉じられています。 - + Create BSpline Bスプライン曲線を作成 @@ -2285,412 +2338,568 @@ Values with differences below this value will be treated as same. ベジェ曲線 - + Bezier curve has been closed - Bezier curve has been closed - + ベジエ曲線は閉じています。 - + Create BezCurve ベジェ曲線を作成 - + Rectangle 四角形 - + Create Plane 平面を作成 - + Create Rectangle 矩形を作成 - + Pick opposite point: 反対側の点を選択します。　 - + Pick center point: 中心点を選択: - + Pick radius: 半径を選択: - + Pick start angle: 開始角度を選択: - + Pick aperture: 視野口径を選択: - + Create Circle 円を作成 - + Create Arc 円弧を作成 - + Start Angle 開始角度 - + Aperture 視野口径 - + Aperture angle: 視野角: - + Polygon 多角形 - + Create Polygon 多角形を作成 - + Ellipse 楕円 - + Create Ellipse 楕円を作成 - + Text テキスト - + Pick location point: 領域を選択: - + Create Text テキストを作成 - + Dimension 寸法 - + Create Dimension 寸法の作成 - + Edges don't intersect! エッジを交差しないでください！ - + ShapeString - ShapeString + シェイプストリング - + Pick ShapeString location point: - Pick ShapeString location point: - + ShapeStringの配置点をピック - + Create ShapeString - Create ShapeString + シェイプストリングを作成 - + Move 移動 - + Select an object to move 移動するオブジェクトを選択します。 - + Pick start point: 始点を選択: - + Copy コピー - + Pick end point: 終点を選択: - + Change Style スタイルの変更 - + Select an object to rotate 回転するオブジェクトを選択します。 - + Pick rotation center: 回転の中心を選択します。 - + Rotate 回転 - + Pick base angle: 基本となる角度を選択します。 - + Pick rotation angle: ピック回転角： - + Select an object to offset オフセットするオブジェクトを選択 - + Offset only works on one object at a time 一度に1つのオブジェクトしかオフセットできません - + Cannot offset this object type このオブジェクトの種類はオフセットすることができません。 - + Pick distance: 距離を選択する: - + Select an object to upgrade アップグレードするオブジェクトを選択する - + Upgrade アップグレード - + Downgrade ダウングレード - - Select an object to trim/extend - - トリムまたは延長するオブジェクトを選択します。 - - - + Scale 拡大縮小 - + Select an object to scale 拡大縮小縮小するオブジェクトを選択する - + Pick base point: 基準点を選択: - + Pick scale factor: 拡大縮小率を選択する: - + Select an object to project - Select an object to project - + 投影するオブジェクトを選択 - + Select a Draft object to edit - Select a Draft object to edit + 編集するDraftオブジェクトを選択 - + This object type is not editable このオブジェクトタイプは編集できません - + Active object must have more than two points/nodes アクティブオブジェクトは２つ以上の点またはノードが必要 - + Selection is not a Knot - Selection is not a Knot + 節点が選択されていません - + Endpoint of BezCurve can't be smoothed - Endpoint of BezCurve can't be smoothed - + ベジエ曲線の端点はスムージングできません - + Select an object to convert - Select an object to convert - + 変換するオブジェクトを選択 - + Select an object to array - Select an object to array - + 配列にするオブジェクトを選択 - + Please select base and path objects - Please select base and path objects - + ベースとパスオブジェクトを選択してください - + Create Point - Create Point + 点を作成 - + Select an object to clone - Select an object to clone - + 複製するオブジェクトを選択 - + Select face(s) on existing object(s) - Select face(s) on existing object(s) - + 既存のオブジェクトの面を選択 Teigha File Converter not found, DWG support is disabled. - Teigha File Converter not found, DWG support is disabled. + Teighaファイルコンバーターが見つかりません。DWGサポートは無効になります。 - - Installed Macros - インストールされているマクロ - - - + &Draft ドラフト(&D) - + Utilities ユーティリティ - + Wire tools 連線ツール - + Snapping - Snapping + スナップ - + Found 1 multi-solids compound: exploding it - Found 1 multi-solids compound: exploding it + コンパウンドが1つ見つかりました：このコンパウンドを分解 - + Sides - Sides + 側面 + + + + BSplines and Bezier curves are not supported by this tool + このツールではBスプラインとベジェ曲線はサポートされていません + + + + The given object is not planar and cannot be converted into a sketch. + The given object is not planar and cannot be converted into a sketch. + + + + Found several objects: creating a shell + + Found several objects: creating a shell + + + + + Found several coplanar objects or faces: creating one face + + Found several coplanar objects or faces: creating one face + + + + + Found 1 linear object: converting to line + + Found 1 linear object: converting to line + + + + + Found 1 closed sketch object: creating a face from it + + Found 1 closed sketch object: creating a face from it + + + + + Found closed wires: creating faces + + Found closed wires: creating faces + + + + + Found several non-treatable objects: creating compound + + Found several non-treatable objects: creating compound + + + + + Length + 長さ + + + + Angle + 角度 + + + + Length of current segment + Length of current segment + + + + Angle of current segment + Angle of current segment + + + + Check this to lock the current angle (l) + Check this to lock the current angle (l) + + + + Con&tinue + 続行 (&T) + + + + &Select edge + &Select edge + + + + Selects an existing edge to be measured by this dimension (E) + Selects an existing edge to be measured by this dimension (E) + + + + Auto + Auto + + + + Sorry, offset of Bezier curves is currently still not supported + + Sorry, offset of Bezier curves is currently still not supported + + + + + Convert to Sketch + スケッチに変換 + + + + Convert to Draft + ドラフトに変換 + + + + Convert + 変換 + + + + Array + 配列 + + + + Select object(s) to trim/extend + + Select object(s) to trim/extend + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + Unable to trim these objects, only Draft wires and arcs are supported + + + + + Unable to trim these objects, too many wires + + Unable to trim these objects, too many wires + + + + + These objects don't intersect + + These objects don't intersect + + + + + Too many intersection points + + Too many intersection points + + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.qm b/src/Mod/Draft/Resources/translations/Draft_nl.qm index 7713189b9a..a2aa4ad441 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_nl.qm and b/src/Mod/Draft/Resources/translations/Draft_nl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.ts b/src/Mod/Draft/Resources/translations/Draft_nl.ts index aff559d75a..8175d9e424 100644 --- a/src/Mod/Draft/Resources/translations/Draft_nl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_nl.ts @@ -1,15 +1,29 @@ + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + + Draft_AddPoint - + Add Point Punt toevoegen - + Adds a point to an existing wire/bspline Voegt een punt toe aan een ​​bestaande draad/bspline @@ -17,12 +31,12 @@ Draft_AddToGroup - + Add to group... Toevoegen aan groep... - + Adds the selected object(s) to an existing group Voegt het/de geselecteerde object(en) aan een bestaande groep toe @@ -30,12 +44,12 @@ Draft_ApplyStyle - + Apply Current Style Huidige stijl toepassen - + Applies current line width and color to selected objects Huidige lijndikte en -kleur toepassen op geselecteerde objecten @@ -43,12 +57,12 @@ Draft_Arc - + Arc Boog - + Creates an arc. CTRL to snap, SHIFT to constrain Creëert een boog. CTRL om te snappen, SHIFT om te beperken @@ -56,12 +70,12 @@ Draft_Array - + Array Reeks - + Creates a polar or rectangular array from a selected object Maak een polair of rechthoekige array van een geselecteerd object @@ -69,12 +83,12 @@ Draft_BSpline - + B-Spline B-Spline - + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain Creëert een meervoudige b-spline. CTRL om te snappen, SHIFt om te beperken @@ -89,18 +103,18 @@ Creates a Bezier curve. CTRL to snap, SHIFT to constrain - Creates a Bezier curve. CTRL to snap, SHIFT to constrain + Hiermee maakt u een Bezier-curve. CTRL om te vangen, SHIFT om te beperken Draft_Circle - + Circle Cirkel - + Creates a circle. CTRL to snap, ALT to select tangent objects Hiermee maakt u een cirkel. CTRL om te snappen, ALT om rakende objecten te kiezen @@ -108,12 +122,12 @@ Draft_Clone - + Clone Kopieer - + Clones the selected object(s) Kopieer het/de geselecteerde(e) object(en) @@ -121,12 +135,12 @@ Draft_CloseLine - + Close Line Sluit lijn - + Closes the line being drawn Sluit de getekende lijn @@ -134,12 +148,12 @@ Draft_DelPoint - + Remove Point Punt verwijderen - + Removes a point from an existing wire or bspline Verwijdert een punt uit een bestaande draad of bspline @@ -147,12 +161,12 @@ Draft_Dimension - + Dimension Afmeting - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Hiermee maakt u een dimensie. CTRL om te snappen, SHIFT om te beperken, ALT om een segment te kiezen @@ -160,12 +174,12 @@ Draft_Downgrade - + Downgrade Vorige versie - + Explodes the selected objects into simpler objects, or subtract faces Verdeelt de geselecteerde objecten in simpelere objecten, of vermindert aantal zijden @@ -173,20 +187,20 @@ Draft_Draft2Sketch - + Draft to Sketch - Draft to Sketch + Van klad naar schets Draft_Drawing - + Drawing Tekening - + Puts the selected objects on a Drawing sheet. Hiermee plaatst u de geselecteerde objecten op een tekenvel. @@ -194,12 +208,12 @@ Draft_Edit - + Edit Bewerken - + Edits the active object Bewerkt het actieve object @@ -207,25 +221,25 @@ Draft_Ellipse - + Ellipse Ellips - + Creates an ellipse. CTRL to snap - Creates an ellipse. CTRL to snap + Hiermee maakt u een ellips. CTRL om te vangen Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) Creates a facebinder object from selected face(s) @@ -233,12 +247,12 @@ Draft_FinishLine - + Finish line Voltooi lijn - + Finishes a line without closing it Voltooit een lijn zonder deze te sluiten @@ -246,12 +260,12 @@ Draft_FlipDimension - + Flip Dimension - Flip Dimension + Afmeting spiegelen - + Flip the normal direction of a dimension Flip the normal direction of a dimension @@ -259,38 +273,25 @@ Draft_Heal - + Heal Heal - - Heal faultly Draft objects saved from an earlier FreeCAD version - Heal faultly Draft objects saved from an earlier FreeCAD version - - - - Draft_Layer - - - Layer - Layer - - - - Adds a layer - Adds a layer + + Heal faulty Draft objects saved from an earlier FreeCAD version + Heal faulty Draft objects saved from an earlier FreeCAD version Draft_Line - + Line Lijn - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Hiermee maakt u een 2-punts lijn. CTRL om te snappen, SHIFT om te beperken @@ -298,12 +299,12 @@ Draft_Move - + Move Verplaatsen - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy Verplaatst de geselecteerde objecten tussen 2 punten. CTRL om te snappen, SHIFT om te beperken, ALT om te kopiëren @@ -311,12 +312,12 @@ Draft_Offset - + Offset Verschuiving - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Verschuift het actieve object. CTRL om te snappen, SHIFT om te beperken, ALT om te kopiëren @@ -324,25 +325,25 @@ Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. - Creates copies of a selected object along a selected path. + Maakt kopieën van een geselecteerd object langs een geselecteerd pad. Draft_Point - + Point Punt - + Creates a point object Maak een punt object @@ -350,12 +351,12 @@ Draft_Polygon - + Polygon Veelhoek - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Creëert een regelmatige veelhoek. CTRL om te snappen, SHIFT te beperken @@ -363,12 +364,12 @@ Draft_Rectangle - + Rectangle Rechthoek - + Creates a 2-point rectangle. CTRL to snap Hiermee maakt u een 2-punts rechthoek. CTRL om te snappen @@ -376,12 +377,12 @@ Draft_Rotate - + Rotate Draaien - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Draait de geselecteerde objecten. CTRL om te snappen, SHIFT om te beperken, ALT om een kopie te creëren @@ -389,12 +390,12 @@ Draft_Scale - + Scale Schalen - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Schaalt de geselecteerde objecten uit een basispunt. CTRL om te srpingen, SHIFT om te beperken, ALT om te kopiëren @@ -402,12 +403,12 @@ Draft_SelectGroup - + Select group Selecteer groep - + Selects all objects with the same parents as this group Selecteert alle objecten met dezelfde ouders als deze groep @@ -415,12 +416,12 @@ Draft_SelectPlane - + SelectPlane Selecteer vlak - + Select a working plane for geometry creation Selecteer een werkvlak om geometrie te creëren @@ -428,17 +429,17 @@ Draft_Shape2DView - + Shape 2D view 2D-uitzichtvorm - + Creates Shape 2D views of selected objects Maakt 2D-uitzichtvormen van geselecteerde objecten - + Convert bidirectionally between Draft and Sketch objects Converteer bidirectioneel tussen Draft en Sketch objecten @@ -446,25 +447,25 @@ Draft_ShapeString - + Shape from text... - Shape from text... + Vorm van tekst... - + Creates text string in shapes. - Creates text string in shapes. + Hiermee maakt u een tekst in vormen. Draft_ShowSnapBar - + Show Snap Bar Show Snap Bar - + Shows Draft snap toolbar Shows Draft snap toolbar @@ -472,38 +473,38 @@ Draft_Snap_Angle - + Angles - Angles + Hoeken - + Snaps to 45 and 90 degrees points on arcs and circles - Snaps to 45 and 90 degrees points on arcs and circles + Vangt op 45 en 90 graden op bogen en cirkels Draft_Snap_Center - + Center - Center + Middelpunt - + Snaps to center of circles and arcs - Snaps to center of circles and arcs + Vangt op het middelpunt van cirkels en bogen Draft_Snap_Dimensions - + Dimensions Dimensies - + Shows temporary dimensions when snapping to Arch objects Shows temporary dimensions when snapping to Arch objects @@ -511,12 +512,12 @@ Draft_Snap_Endpoint - + Endpoint - Endpoint + Eindpunt - + Snaps to endpoints of edges Snaps to endpoints of edges @@ -524,12 +525,12 @@ Draft_Snap_Extension - + Extension - Extension + Extensie - + Snaps to extension of edges Snaps to extension of edges @@ -537,90 +538,90 @@ Draft_Snap_Grid - + Grid - Grid + Raster - + Snaps to grid points - Snaps to grid points + Vangt op rasterpunten Draft_Snap_Intersection - + Intersection Snijpunt - + Snaps to edges intersections - Snaps to edges intersections + Vangt op snijpunten van randen Draft_Snap_Lock - + Toggle On/Off - Toggle On/Off + In-/ uitschakelen - + Activates/deactivates all snap tools at once - Activates/deactivates all snap tools at once + Activeert deactiveert/alle vanghulpmiddelen in één keer Draft_Snap_Midpoint - + Midpoint - Midpoint + Midden - + Snaps to midpoints of edges - Snaps to midpoints of edges + Vangt op het midden van randen Draft_Snap_Near - + Nearest - Nearest + Dichtstbijzijnde - + Snaps to nearest point on edges - Snaps to nearest point on edges + Vangt op het dichtstbijzijnde punt op randen Draft_Snap_Ortho - + Ortho Ortho - + Snaps to orthogonal and 45 degrees directions - Snaps to orthogonal and 45 degrees directions + Vangt op orthogonale en 45 graden richtingen Draft_Snap_Parallel - + Parallel - Parallel + Evenwijdig - + Snaps to parallel directions of edges Snaps to parallel directions of edges @@ -628,12 +629,12 @@ Draft_Snap_Perpendicular - + Perpendicular - Perpendicular + Loodrecht - + Snaps to perpendicular points on edges Snaps to perpendicular points on edges @@ -641,12 +642,12 @@ Draft_Snap_WorkingPlane - + Working Plane - Working Plane + Werkvlak - + Restricts the snapped point to the current working plane Restricts the snapped point to the current working plane @@ -654,12 +655,12 @@ Draft_Text - + Text Tekst - + Creates an annotation. CTRL to snap Hiermee maakt u een aantekening. CTRL op te snappen @@ -667,12 +668,12 @@ Draft_ToggleConstructionMode - + Toggle construcion Mode Bouwmodus in-/uitschakelen - + Toggles the Construction Mode for next objects. Schakelt de Bouw-modus voor de volgende objecten aan/uit. @@ -680,12 +681,12 @@ Draft_ToggleContinueMode - + Toggle Continue Mode Toggle Continue Mode - + Toggles the Continue Mode for next commands. Schakelt de vervolg-modus voor de volgende opdrachten. @@ -693,12 +694,12 @@ Draft_ToggleDisplayMode - + Toggle display mode Wissel weergave-modus - + Swaps display mode of selected objects between wireframe and flatlines Schakelt weergavemodus van geselecteerde objecten tussen wireframe en flatlines @@ -706,25 +707,25 @@ Draft_ToggleGrid - + Toggle Grid Schakel raster - - Toggles the Draft gid on/off - Toggles the Draft gid on/off + + Toggles the Draft grid on/off + Toggles the Draft grid on/off Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Trimt of breidt het geselecteerde object uit, of extrudeert enkele oppervlakken. CTRL snapt, SHIFT, beperkt tot huidige segment of tot de normale, ALT omkeert @@ -732,12 +733,12 @@ Draft_UndoLine - + Undo last segment Maak laatste segment ongedaan - + Undoes the last drawn segment of the line being drawn Verwijdert het laatst getekende segment van de lijn die wordt getekend @@ -745,25 +746,38 @@ Draft_Upgrade - + Upgrade Opwaarderen - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces Voegt de geselecteerde objecten samen, of converteert gesloten lijnen tot een vlak, of voegt vlakken samen + + Draft_VisGroup + + + VisGroup + VisGroup + + + + Adds a VisGroup + Adds a VisGroup + + Draft_Wire - + DWire DWire - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain @@ -771,12 +785,12 @@ Draft_WireToBSpline - + Wire to BSpline Draad naar BSpline - + Converts between Wire and BSpline Converteert tussen draad en BSpline @@ -804,17 +818,17 @@ de standaardkleur voor snap symbolen - + This is the default color for objects being drawn while in construction mode. Dit is de gekozen kleur voor objecten getekend in constructie-modus - + This is the default group name for construction geometry Dit is de standaard groepsnaam voor de constructie geometrie - + Construction Constructie @@ -917,17 +931,17 @@ such as "Arial:Bold" Originele kleur en lijndikte - + if this is checked, paper space objects will be imported too Als dit ingeschakeld is, zijn paper space objecten ook geïmporteerd - + if this is unchecked, texts/mtexts won't be imported Als dit niet ingeschakeld is, werden teksten en mtexts niet geïmporteerd - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. Bij het exporteren van splines naar DXF-formaat, worden ze omgezet in polylijnen. Deze waarde is de maximale lengte van elk van de polylijn segmenten. Als 0, dan wordt de hele spline behandeld als een recht segment. @@ -952,7 +966,7 @@ such as "Arial:Bold" Algemene instellingen - + Construction group name Bouwgroepsnaam @@ -968,22 +982,22 @@ Values with differences below this value will be treated as same. Deze waarde wordt gebruikt door functies die gebruikmaken van een tolerantie. Waarden met verschillen onder deze waarde zullen als gelijk worden behandeld. - + DXF format options DXF-formaat opties - + Check this if you want the non-named blocks (beginning with a *) to be imported too Schakel dit in als de niet-genoemde blokken (die beginnen met een *) moeten ook worden geïmporteerd - + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... Indien ingeschakeld, zal freecad proberen gezamenlijk samenvallende objecten in draden omzetten. Pas op, dit kan even duren... - + Join geometry Geometrie koppelen @@ -1083,32 +1097,32 @@ Values with differences below this value will be treated as same. Selecteer basisobjecten na het kopiëren - + If checked, a grid will appear when drawing Indien aangevinkt, zal een raster worden weergegeven bij het tekenen - + Use grid Gebruik raster - + Grid spacing Rasterafstand - + The spacing between each grid line De afstand tussen elke rasterlijn - + Main lines every Hoofdlijnen elke - + Mainlines will be drawn thicker. Specify here how many squares between mainlines. Hoofdlijnen worden dikker getrokken. Geef hier aan hoeveel ruitjes tussen de hoofdlijnen. @@ -1138,22 +1152,22 @@ Values with differences below this value will be treated as same. Rechts - + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable Als dit ingeschakeld is, zullen objecten op de dezelfde lagen in Draft blokken worden omgezet, waardoor het display sneller zal draaien, maar de objecten minder gemakkelijk bewerkbaar zullen zijn - + Group layers into blocks Lagen groeperen in blokken - + If this is checked, all objects containing faces will be exported as 3d polyfaces Als dit ingeschakeld is, worden alle objecten met oppervlakken geëxporteerd als 3D-polyfaces - + Export 3D objects as polyface meshes 3D-objecten exporteren als polyface netten @@ -1193,37 +1207,37 @@ Values with differences below this value will be treated as same. Show Working Plane tracker - + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document - + Use standard font size for texts Standaardlettergrootte gebruiken voor teksten - + If this is checked, hatches will be converted into simple wires If this is checked, hatches will be converted into simple wires - + Import hatch boundaries as wires Import hatch boundaries as wires - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width - + Render polylines with width Render polylines with width @@ -1278,67 +1292,67 @@ Values with differences below this value will be treated as same. Always snap (disable snap mod) - + Construction geometry Constructie geometrie - + Construction geometry color Construction geometry color - + Import - Import - - - - texts and dimensions - texts and dimensions - - - - points - points + Importeren + texts and dimensions + teksten en afmetingen + + + + points + punten + + + layouts layouts - + *blocks *blocks - + If this is checked, the exported objects will be projected to reflect the current view direction If this is checked, the exported objects will be projected to reflect the current view direction - + Project exported objects along current view direction Project exported objects along current view direction - + Ellipse export is badly supported. Use this to export them as polylines instead. Ellipse export is badly supported. Use this to export them as polylines instead. - + DWG format options DWG format options - + Path to Teigha File Converter Path to Teigha File Converter - + The path to your Teigha File Converter executable The path to your Teigha File Converter executable @@ -1360,7 +1374,7 @@ Values with differences below this value will be treated as same. Default line width - Default line width + Standaard lijndikte @@ -1380,7 +1394,7 @@ Values with differences below this value will be treated as same. Color - Color + Kleur @@ -1390,27 +1404,27 @@ Values with differences below this value will be treated as same. Grid - Grid + Raster - + Always show the grid Always show the grid Texts and dimensions - Texts and dimensions + Teksten en afmetingen Texts - Texts + Teksten font - font + lettertype @@ -1420,55 +1434,40 @@ Values with differences below this value will be treated as same. size - size + grootte - + Dimensions arrows Dimensions arrows - + style - style + stijl - + Dot - Dot + punt - + Circle Cirkel - - - Arrow - Arrow - - - - The default size of arrows - The default size of arrows - - - - Dimensions lines - Dimensions lines - - - - text above - text above - - text inside - text inside + Arrow + Pijl + The default size of arrows + De standaardgrootte van pijlen + + + The default size of dimensions extension lines The default size of dimensions extension lines @@ -1480,12 +1479,12 @@ Values with differences below this value will be treated as same. orientation - orientation + Orientatie spacing - spacing + afstand @@ -1508,80 +1507,55 @@ Values with differences below this value will be treated as same. Fill objects with faces whenever possible - - DXF / DWG options - DXF / DWG options - - - + Create Aanmaken - - If thi sis checked, only standard Part objects will be created (fastest) - If thi sis checked, only standard Part objects will be created (fastest) - - - + simple Part shapes simple Part shapes - + If this is checked, parametric Draft objects will be created whenever possible If this is checked, parametric Draft objects will be created whenever possible - + Draft objects Draft objects - + If this is checked, sketches will be created whenever possible If this is checked, sketches will be created whenever possible - + Sketches - Sketches + Schetsen - + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. - + Get original colors from the DXF file Get original colors from the DXF file - - If this is checked, DXF layers will be imported as Draft layers - If this is checked, DXF layers will be imported as Draft layers - - - - Use Draft Layers - Use Draft Layers - - - + Treat ellipses and splines as polylines Treat ellipses and splines as polylines - + Max Spline Segment: Max Spline Segment: - - - SVG / OCA options - SVG / OCA options - Export style @@ -1597,21 +1571,146 @@ Values with differences below this value will be treated as same. Show the unit suffix in dimensions Show the unit suffix in dimensions + + + DXF / DWG + DXF / DWG + + + + Automatic update + Automatic update + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + + + + Allow FreeCAD to automatically download and update the DXF libraries + Allow FreeCAD to automatically download and update the DXF libraries + + + + If this is checked, only standard Part objects will be created (fastest) + If this is checked, only standard Part objects will be created (fastest) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + If this is checked, DXF layers will be imported as Draft VisGroups + + + + Use VisGroups + Use VisGroups + + + + mm + mm + + + + SVG / OCA + SVG / OCA + + + + Grid size + Grid size + + + + the number of horizontal or vertical lines of the grid + the number of horizontal or vertical lines of the grid + + + + lines + lines + + + + Dimensions + Dimensies + + + + display mode + display mode + + + + text above (2D) + text above (2D) + + + + text inside (3D) + text inside (3D) + + + + extension lines size + extension lines size + + + + Drawing views + Drawing views + + + + Dashed line definition + Dashed line definition + + + + A SVG linestyle definition + A SVG linestyle definition + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + Dashdot line definition + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Dotted line definition + + + + 0.02,0.02 + 0.02,0.02 + Workbench - + Draft Snap Draft Snap - + Draft creation tools Draft creation tools - + Draft modification tools Draft modification tools @@ -1619,640 +1718,602 @@ Values with differences below this value will be treated as same. draft - + Draft Command Bar Draft Command Bar - + active command: actieve opdracht: - + None Geen - + Active Draft command Actieve opdracht - + X coordinate of next point X-coördinaat van het volgende punt - + X X - + Y Y - + Z Z - + Y coordinate of next point Y-coördinaat van het volgende punt - + Z coordinate of next point Z-coördinaat van het volgende punt - + Radius Straal - + Radius of Circle Straal van de cirkel - + &Relative &Relatief - + Coordinates relative to last point or absolute (SPACE) Coördinaten relatief ten opzichte van vorig punt of absoluut (SPATIE) - + F&illed Gev&uld - + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) Schakel dit in als het object moet als ingevuld verschijnen, anders zal het als wireframe verschijnen (i) - + &Finish &Beëindigen - + Finishes the current drawing or editing operation (F) Eindigt de huidige tekening of bewerking (F) - + If checked, command will not finish until you press the command button again Indien ingeschakeld, zal de huidige opdracht niet beëindigen totdat u opnieuw op de command-toets druk - - &Continue - &Doorgaan - - - + If checked, an OCC-style offset will be performed instead of the classic offset Indien ingeschakeld, zal een OCC-stijl verschuiving worden uitgevoerd in plaats van de klassieke stijl - + &OCC-style offset &OCC-stijl verschuiving - + Add points to the current object Punten aan het huidige object toevoegen - + Remove points from the current object Punten van het huidige object verwijderen - + Make Bezier node sharp Make Bezier node sharp - + Make Bezier node tangent Make Bezier node tangent - + Make Bezier node symmetric Make Bezier node symmetric - + &Undo &Ongedaan maken - + Undo the last segment (CTRL+Z) Laatste segment ongedaan maken (CTRL+Z) - + &Close & Sluiten - + Finishes and closes the current line (C) Voltooit en sluit de huidige lijn (C) - + &Wipe &Veeg - + Wipes the existing segments of this line and starts again from the last point (W) Veegt de bestaande segmenten van deze lijn en begint weer vanaf de laatste punt (W) - + Number of sides Aantal zijden - + Offset Verschuiving - + XY XY - + Select XY plane Selecteer XY-vlak - + XZ XZ - + Select XZ plane Selecteer XY-vlak - + YZ YZ - + Select YZ plane Selecteer YZ vlak - + View Weergave - + Select plane perpendicular to the current view Selecteer een vlak loodrecht op het huidige aanzicht - + Do not project points to a drawing plane Projecteer geen punten naar een tekenvlak - + &Copy &Kopiëren - + If checked, objects will be copied instead of moved (C) Indien aangevinkt, zullen objecten worden gekopieerd in plaats van verplaatst (C) - + Text string to draw Text string to draw - + String Tekenreeks - + Height of text - Height of text + Teksthoogte - + Height Hoogte - + Intercharacter spacing Intercharacter spacing - + Tracking - Tracking + Volgen - + Full path to font file: Full path to font file: - + Open a FileChooser for font file Open a FileChooser for font file - + Set/unset a working plane Set/unset a working plane - + Line Color Lijnkleur - + Face Color Oppervlakkleur - + Line Width Lijndikte - + Font Size Tekengrootte - + Apply to selected objects Toepassen op geselecteerde objecten - + Toggles Construction Mode Constructie-modus in/uitschakelen - + Select Plane Selecteer vlak - + Line Lijn - + DWire DWire - + Circle Cirkel - + Center X Middelpunt X - + Arc Boog - + Point Punt - + Distance Afstand - + Trim Trim - + Pick Object Selecteer object - + Edit Bewerken - + Global X - Global X + Globale X - + Global Y - Global Y + Globale Y - + Global Z - Global Z + Globale Z - + Local X - Local X + Lokale X - + Local Y - Local Y + Lokale Y - + Local Z - Local Z + Lokale Z - + Invalid Size value. Using 200.0. Invalid Size value. Using 200.0. - + Invalid Tracking value. Using 0. Invalid Tracking value. Using 0. - + Please enter a text string. Please enter a text string. - + Select a Font file Select a Font file - + Please enter a font file. Please enter a font file. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + Found groups: closing each open object inside Groepen gevonden: sluiten alle geopende objecten binnen - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidificable object: solidifying it 1 Solide-gelijk object gevonden: solide maken - + Found 2 objects: fusing them 2 Objecten gevonden: versmelt ze - - Found several objects: making a shell - - Found several objects: making a shell - - - - - Found several coplanar objects or faces: making one face - - Found several coplanar objects or faces: making one face - - - - + Found 1 non-parametric objects: draftifying it 1 Niet-parametrische object gevonden: Draft object maken - - Found 1 closed sketch object: making a face from it - - 1 Gesloten schets-object gevonden: maak er een vlak van - - - - Found closed wires: making faces - - Found closed wires: making faces - - - - + Found 1 open wire: closing it 1 open draad Gevonden: sluiten hem - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Verschillende randen gevonden: draad maken - - Found several non-treatable objects: making compound - - Verschillende niet-behandelbare objecten gevonden: compound maken - - - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 parametric object: breaking its dependencies 1 Parametrische object gevonden: breek de afhankelijkheden - + Found 2 objects: subtracting them 2 objecten gevonden: zal ze aftrekken - + Found several faces: splitting them Verschillende vlakken gevonden: splits ze - + Found several objects: subtracting them from the first one Verschillende objecten gevonden: deze aftrekken van de eerste - + Found 1 face: extracting its wires 1 vlak gevonden: uitpakken van de draden - + Found only wires: extracting their edges Alleen draden gevonden: uitpakken van hun randen - + No more downgrade possible No more downgrade possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + Pick a face to define the drawing plane Kies een vlak om het tekenvlak te definiëren - + Pick first point: Kies eerste punt: - + Create Line Create Line - + Create DWire Create DWire - + DWire has been closed DWire has been closed - + Last point has been removed Laatste punt is verwijderd - + Pick next point: Kies volgende punt: - + Pick next point, or (F)inish or (C)lose: Kies het volgende punt, eindig (F) of Sluit (C): - + BSpline BSpline @@ -2263,7 +2324,7 @@ Values with differences below this value will be treated as same. Spline is gesloten - + Create BSpline Bspline aanmaken @@ -2273,369 +2334,363 @@ Values with differences below this value will be treated as same. BezCurve - + Bezier curve has been closed Bezier curve has been closed - + Create BezCurve Create BezCurve - + Rectangle Rechthoek - + Create Plane - Create Plane + Vlak aanmaken - + Create Rectangle Rechthoek aanmaken - + Pick opposite point: Kies het tegenoverliggende punt: - + Pick center point: Kies middelpunt: - + Pick radius: Kies straal: - + Pick start angle: Kies beginhoek: - + Pick aperture: Kies diafragma: - + Create Circle Cirkel aanmaken - + Create Arc Boog aanmaken - + Start Angle Starthoek - + Aperture Opening - + Aperture angle: Openingshoek: - + Polygon Veelhoek - + Create Polygon Veelhoek aanmaken - + Ellipse Ellips - + Create Ellipse - Create Ellipse + Ellips aanmaken - + Text Tekst - + Pick location point: Kies locatiepunt: - + Create Text Tekst aanmaken - + Dimension Afmeting - + Create Dimension Dimensie aanmaken - + Edges don't intersect! Randen niet snijden! - + ShapeString ShapeString - + Pick ShapeString location point: Pick ShapeString location point: - + Create ShapeString Create ShapeString - + Move Verplaatsen - + Select an object to move Selecteer een te verplaatsen object - + Pick start point: Kies startpunt: - + Copy Kopie - + Pick end point: Kies een eindpunt: - + Change Style Stijl wijzigen - + Select an object to rotate Selecteer een te draaien object - + Pick rotation center: Kies draaipunt: - + Rotate Draaien - + Pick base angle: Kies basishoek: - + Pick rotation angle: Kies rotatiehoek: - + Select an object to offset Selecteer een object om te verschuiven - + Offset only works on one object at a time Verschuiving werkt slechts op één object per keer - + Cannot offset this object type Dit objecttype niet kan verschuift worden - + Pick distance: Kies afstand: - + Select an object to upgrade Selecteer een object om te opwaarderen - + Upgrade Opwaarderen - + Downgrade Vorige versie - - Select an object to trim/extend - - Selecteer een object om te trimmen / uit te breiden - - - + Scale Schalen - + Select an object to scale Selecteer een object om te schalen - + Pick base point: Kies basispunt: - + Pick scale factor: Kies schaalfactor: - + Select an object to project Select an object to project - + Select a Draft object to edit Select a Draft object to edit - + This object type is not editable Dit objecttype kan niet worden bewerkt - + Active object must have more than two points/nodes Actieve object moet meer dan twee punten/nodes hebben - + Selection is not a Knot Selection is not a Knot - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert Select an object to convert - + Select an object to array Select an object to array - + Please select base and path objects Please select base and path objects - + Create Point Create Point - + Select an object to clone Select an object to clone - + Select face(s) on existing object(s) Select face(s) on existing object(s) @@ -2649,41 +2704,212 @@ Values with differences below this value will be treated as same. - - Installed Macros - Geïnstalleerde macro 's - - - + &Draft &Draft - + Utilities - Utilities + Hulpmiddelen - + Wire tools Draadwerktuigen - + Snapping Snapping - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Sides Sides + + + BSplines and Bezier curves are not supported by this tool + BSplines and Bezier curves are not supported by this tool + + + + The given object is not planar and cannot be converted into a sketch. + The given object is not planar and cannot be converted into a sketch. + + + + Found several objects: creating a shell + + Found several objects: creating a shell + + + + + Found several coplanar objects or faces: creating one face + + Found several coplanar objects or faces: creating one face + + + + + Found 1 linear object: converting to line + + Found 1 linear object: converting to line + + + + + Found 1 closed sketch object: creating a face from it + + Found 1 closed sketch object: creating a face from it + + + + + Found closed wires: creating faces + + Found closed wires: creating faces + + + + + Found several non-treatable objects: creating compound + + Found several non-treatable objects: creating compound + + + + + Length + Lengte + + + + Angle + Hoek + + + + Length of current segment + Length of current segment + + + + Angle of current segment + Angle of current segment + + + + Check this to lock the current angle (l) + Check this to lock the current angle (l) + + + + Con&tinue + Con&tinue + + + + &Select edge + &Select edge + + + + Selects an existing edge to be measured by this dimension (E) + Selects an existing edge to be measured by this dimension (E) + + + + Auto + Auto + + + + Sorry, offset of Bezier curves is currently still not supported + + Sorry, offset of Bezier curves is currently still not supported + + + + + Convert to Sketch + Convert to Sketch + + + + Convert to Draft + Convert to Draft + + + + Convert + Convert + + + + Array + Reeks + + + + Select object(s) to trim/extend + + Select object(s) to trim/extend + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + Unable to trim these objects, only Draft wires and arcs are supported + + + + + Unable to trim these objects, too many wires + + Unable to trim these objects, too many wires + + + + + These objects don't intersect + + These objects don't intersect + + + + + Too many intersection points + + Too many intersection points + + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + diff --git a/src/Mod/Draft/Resources/translations/Draft_no.qm b/src/Mod/Draft/Resources/translations/Draft_no.qm index 1f4bed384b..e9808b5cab 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_no.qm and b/src/Mod/Draft/Resources/translations/Draft_no.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_no.ts b/src/Mod/Draft/Resources/translations/Draft_no.ts index 26a7861308..e17e3ddfba 100644 --- a/src/Mod/Draft/Resources/translations/Draft_no.ts +++ b/src/Mod/Draft/Resources/translations/Draft_no.ts @@ -1,15 +1,29 @@ + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + + Draft_AddPoint - + Add Point Legg til punkt - + Adds a point to an existing wire/bspline Legger til et punkt på en eksisterende tråd/ bspline @@ -17,12 +31,12 @@ Draft_AddToGroup - + Add to group... Legg til i gruppe... - + Adds the selected object(s) to an existing group Legger til valgte objekt(er) til en eksisterende gruppe @@ -30,12 +44,12 @@ Draft_ApplyStyle - + Apply Current Style Bruk gjeldende stil - + Applies current line width and color to selected objects Legg til gjeldende linjebredde og farge på valgte objekter @@ -43,12 +57,12 @@ Draft_Arc - + Arc Bue - + Creates an arc. CTRL to snap, SHIFT to constrain Lager en bue. CTRL for magnet / SHIFT for å låse @@ -56,12 +70,12 @@ Draft_Array - + Array Matrise - + Creates a polar or rectangular array from a selected object Oppretter en polar eller rektangulær matrise av et merket objekt @@ -69,12 +83,12 @@ Draft_BSpline - + B-Spline B-Spline - + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain Lager en flerpunkt b-spline. CTRL for magnet/ SHIFT for å låse @@ -95,12 +109,12 @@ Draft_Circle - + Circle Sirkel - + Creates a circle. CTRL to snap, ALT to select tangent objects Lager en sirkel. CTRL for magnet/ ALT velger tangent til objekter @@ -108,12 +122,12 @@ Draft_Clone - + Clone Klone - + Clones the selected object(s) Kloner valgte objektet @@ -121,12 +135,12 @@ Draft_CloseLine - + Close Line Lukk linje - + Closes the line being drawn Lukker linja som blir tegnet @@ -134,12 +148,12 @@ Draft_DelPoint - + Remove Point Fjern punkt - + Removes a point from an existing wire or bspline Fjerner et punkt fra en eksisterende tråd eller bspline @@ -147,12 +161,12 @@ Draft_Dimension - + Dimension Dimensjon - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Lager en dimensjon. CTRL for magnet/ SHIFT for å låse/ ALT for å velge et segment @@ -160,12 +174,12 @@ Draft_Downgrade - + Downgrade Nedgrader - + Explodes the selected objects into simpler objects, or subtract faces Eksploderer de valgte objektene i enklere objekter eller fjerner flater @@ -173,7 +187,7 @@ Draft_Draft2Sketch - + Draft to Sketch Utkast til skisse @@ -181,12 +195,12 @@ Draft_Drawing - + Drawing Tegning - + Puts the selected objects on a Drawing sheet. Setter de valgte objektene på et tegneark. @@ -194,12 +208,12 @@ Draft_Edit - + Edit Rediger - + Edits the active object Redigerer aktivt objekt @@ -207,12 +221,12 @@ Draft_Ellipse - + Ellipse Ellipse - + Creates an ellipse. CTRL to snap Creates an ellipse. CTRL to snap @@ -220,12 +234,12 @@ Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) Creates a facebinder object from selected face(s) @@ -233,12 +247,12 @@ Draft_FinishLine - + Finish line Avslutt linje - + Finishes a line without closing it Avslutter en linje uten å lukke den @@ -246,12 +260,12 @@ Draft_FlipDimension - + Flip Dimension Flip Dimension - + Flip the normal direction of a dimension Flip the normal direction of a dimension @@ -259,38 +273,25 @@ Draft_Heal - + Heal Heal - - Heal faultly Draft objects saved from an earlier FreeCAD version - Heal faultly Draft objects saved from an earlier FreeCAD version - - - - Draft_Layer - - - Layer - Layer - - - - Adds a layer - Adds a layer + + Heal faulty Draft objects saved from an earlier FreeCAD version + Heal faulty Draft objects saved from an earlier FreeCAD version Draft_Line - + Line Linje - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Lager en 2-punkts linje. CTRL for magnet / SHIFT for å låse @@ -298,12 +299,12 @@ Draft_Move - + Move Flytt - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy Flytter de valgte objektene mellom to punkter. CTRL for magnet/ SHIFT for å låse/ ALT for å kopiere @@ -311,12 +312,12 @@ Draft_Offset - + Offset Avsetting - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Forskyver aktivt objekt. CTRL for magnet/ SHIFT for å låse/ ALT for å kopiere @@ -324,12 +325,12 @@ Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. Creates copies of a selected object along a selected path. @@ -337,12 +338,12 @@ Draft_Point - + Point Point - + Creates a point object Oppretter et punktobjekt @@ -350,12 +351,12 @@ Draft_Polygon - + Polygon Polygon - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Lager en vanlig polygon. CTRL for magnet/ SHIFT for å låse @@ -363,12 +364,12 @@ Draft_Rectangle - + Rectangle Rektangel - + Creates a 2-point rectangle. CTRL to snap Lager et 2-punkts rektangel. CTRL for magnet @@ -376,12 +377,12 @@ Draft_Rotate - + Rotate Roter - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Roterer valgte objekter. CTRL for magnet/ SKIFT for å låse/ ALT lager en kopi @@ -389,12 +390,12 @@ Draft_Scale - + Scale Skaler - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Skalerer valgte objekter fra et basepunkt. CTRL for magnet/ SHIFT for å låse/ ALT for å kopiere @@ -402,12 +403,12 @@ Draft_SelectGroup - + Select group Velg gruppe - + Selects all objects with the same parents as this group Merker alle objekter med samme overordnede som denne gruppen @@ -415,12 +416,12 @@ Draft_SelectPlane - + SelectPlane Velg plan - + Select a working plane for geometry creation Velg et arbeidsplan for opprettelse av geometri @@ -428,17 +429,17 @@ Draft_Shape2DView - + Shape 2D view Figur 2D-visning - + Creates Shape 2D views of selected objects Oppretter figur 2D-visning for valgte objekter - + Convert bidirectionally between Draft and Sketch objects Convert bidirectionally between Draft and Sketch objects @@ -446,12 +447,12 @@ Draft_ShapeString - + Shape from text... Shape from text... - + Creates text string in shapes. Creates text string in shapes. @@ -459,12 +460,12 @@ Draft_ShowSnapBar - + Show Snap Bar Show Snap Bar - + Shows Draft snap toolbar Shows Draft snap toolbar @@ -472,12 +473,12 @@ Draft_Snap_Angle - + Angles - Angles + Vinkler - + Snaps to 45 and 90 degrees points on arcs and circles Snaps to 45 and 90 degrees points on arcs and circles @@ -485,12 +486,12 @@ Draft_Snap_Center - + Center Center - + Snaps to center of circles and arcs Snaps to center of circles and arcs @@ -498,12 +499,12 @@ Draft_Snap_Dimensions - + Dimensions Dimensions - + Shows temporary dimensions when snapping to Arch objects Shows temporary dimensions when snapping to Arch objects @@ -511,12 +512,12 @@ Draft_Snap_Endpoint - + Endpoint Endpoint - + Snaps to endpoints of edges Snaps to endpoints of edges @@ -524,12 +525,12 @@ Draft_Snap_Extension - + Extension Extension - + Snaps to extension of edges Snaps to extension of edges @@ -537,12 +538,12 @@ Draft_Snap_Grid - + Grid Grid - + Snaps to grid points Snaps to grid points @@ -550,12 +551,12 @@ Draft_Snap_Intersection - + Intersection Kryssningspunkt - + Snaps to edges intersections Snaps to edges intersections @@ -563,25 +564,25 @@ Draft_Snap_Lock - + Toggle On/Off Toggle On/Off - + Activates/deactivates all snap tools at once - Activates/deactivates all snap tools at once + Aktiverer/deaktiverer alle snap-verktøy samtidig Draft_Snap_Midpoint - + Midpoint Midpoint - + Snaps to midpoints of edges Snaps to midpoints of edges @@ -589,12 +590,12 @@ Draft_Snap_Near - + Nearest Nearest - + Snaps to nearest point on edges Snaps to nearest point on edges @@ -602,12 +603,12 @@ Draft_Snap_Ortho - + Ortho Ortho - + Snaps to orthogonal and 45 degrees directions Snaps to orthogonal and 45 degrees directions @@ -615,12 +616,12 @@ Draft_Snap_Parallel - + Parallel Parallel - + Snaps to parallel directions of edges Snaps to parallel directions of edges @@ -628,12 +629,12 @@ Draft_Snap_Perpendicular - + Perpendicular Perpendicular - + Snaps to perpendicular points on edges Snaps to perpendicular points on edges @@ -641,12 +642,12 @@ Draft_Snap_WorkingPlane - + Working Plane Working Plane - + Restricts the snapped point to the current working plane Restricts the snapped point to the current working plane @@ -654,12 +655,12 @@ Draft_Text - + Text Tekst - + Creates an annotation. CTRL to snap Lager en merknad. CTRL for magnet @@ -667,12 +668,12 @@ Draft_ToggleConstructionMode - + Toggle construcion Mode Veksler konstruksjonsmodus - + Toggles the Construction Mode for next objects. Veksler konstruksjonsmodus for neste objekter. @@ -680,12 +681,12 @@ Draft_ToggleContinueMode - + Toggle Continue Mode Toggle Continue Mode - + Toggles the Continue Mode for next commands. Toggles the Continue Mode for next commands. @@ -693,12 +694,12 @@ Draft_ToggleDisplayMode - + Toggle display mode Bytt visningsmodus - + Swaps display mode of selected objects between wireframe and flatlines Bytter visningsmodus på utvalgte objekter mellom trådrammer og flatlinjer @@ -706,25 +707,25 @@ Draft_ToggleGrid - + Toggle Grid Toggle Grid - - Toggles the Draft gid on/off - Toggles the Draft gid on/off + + Toggles the Draft grid on/off + Toggles the Draft grid on/off Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts @@ -732,12 +733,12 @@ Draft_UndoLine - + Undo last segment Angre siste segment - + Undoes the last drawn segment of the line being drawn Angrer siste segment på linjen som blir tegnet @@ -745,25 +746,38 @@ Draft_Upgrade - + Upgrade Oppgrader - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces Sammenføyer valgte objekter til ett, konverterer lukkede linjer til fylte flater eller sammenføyer flater + + Draft_VisGroup + + + VisGroup + VisGroup + + + + Adds a VisGroup + Adds a VisGroup + + Draft_Wire - + DWire DWire - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain @@ -771,12 +785,12 @@ Draft_WireToBSpline - + Wire to BSpline Tråd til BSpline - + Converts between Wire and BSpline Konverterer mellom tråd og BSpline @@ -804,17 +818,17 @@ standardfarge for magnetsymboler - + This is the default color for objects being drawn while in construction mode. Dette er standard farge for objekter tegnet i konstruksjonmodus. - + This is the default group name for construction geometry Dette er standard gruppenavn for konstruksjongeometri - + Construction Konstruksjon @@ -917,17 +931,17 @@ such as "Arial:Bold" Original farge og linjebredde - + if this is checked, paper space objects will be imported too hvis denne er valgt vil papirobjekter også importeres - + if this is unchecked, texts/mtexts won't be imported Hvis denne er avkrysset vil tekster/ mtekster ikke bli importert - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. Ved eksport av splines til DXF blir de konvertert til polylinjer. Denne verdien er den maksimale lengden for hver av polylinjesegmentene. Hvis 0 blir hele splinen behandlet som et rett segment. @@ -952,7 +966,7 @@ such as "Arial:Bold" Generelle innstillinger - + Construction group name Konstruksjonsgruppenavn @@ -968,22 +982,22 @@ Values with differences below this value will be treated as same. Dette er toleranseverdien brukt av funksjoner. Verdier med forskjeller under denne verdien vil bli behandlet som like. - + DXF format options DXF formatalternativer - + Check this if you want the non-named blocks (beginning with a *) to be imported too Merk av her hvis du vil at ikke navngitte blokker (som begynner med *) skal importeres også - + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... Hvis dette er merket vil freecad prøve å sammenføye sammenfallende gjenstander som tråder. NB: dette kan ta en stund... - + Join geometry Sammenføy geometri @@ -1000,7 +1014,7 @@ Values with differences below this value will be treated as same. Alternate SVG Patterns location - Alternate SVG Patterns location + Alternativ SVG mønstre plassering @@ -1083,32 +1097,32 @@ Values with differences below this value will be treated as same. Select base objects after copying - + If checked, a grid will appear when drawing If checked, a grid will appear when drawing - + Use grid Use grid - + Grid spacing Grid spacing - + The spacing between each grid line The spacing between each grid line - + Main lines every Main lines every - + Mainlines will be drawn thicker. Specify here how many squares between mainlines. Mainlines will be drawn thicker. Specify here how many squares between mainlines. @@ -1138,22 +1152,22 @@ Values with differences below this value will be treated as same. Høyre - + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable - + Group layers into blocks Group layers into blocks - + If this is checked, all objects containing faces will be exported as 3d polyfaces If this is checked, all objects containing faces will be exported as 3d polyfaces - + Export 3D objects as polyface meshes Export 3D objects as polyface meshes @@ -1193,37 +1207,37 @@ Values with differences below this value will be treated as same. Show Working Plane tracker - + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document - + Use standard font size for texts Use standard font size for texts - + If this is checked, hatches will be converted into simple wires If this is checked, hatches will be converted into simple wires - + Import hatch boundaries as wires Import hatch boundaries as wires - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width - + Render polylines with width Render polylines with width @@ -1278,67 +1292,67 @@ Values with differences below this value will be treated as same. Always snap (disable snap mod) - + Construction geometry Construction geometry - + Construction geometry color Construction geometry color - + Import Import - + texts and dimensions texts and dimensions - + points points - + layouts layouts - + *blocks *blocks - + If this is checked, the exported objects will be projected to reflect the current view direction If this is checked, the exported objects will be projected to reflect the current view direction - + Project exported objects along current view direction Project exported objects along current view direction - + Ellipse export is badly supported. Use this to export them as polylines instead. Ellipse export is badly supported. Use this to export them as polylines instead. - + DWG format options DWG format options - + Path to Teigha File Converter Path to Teigha File Converter - + The path to your Teigha File Converter executable The path to your Teigha File Converter executable @@ -1393,9 +1407,9 @@ Values with differences below this value will be treated as same. Grid - + Always show the grid - Always show the grid + Alltid vise rutenettet @@ -1423,52 +1437,37 @@ Values with differences below this value will be treated as same. size - + Dimensions arrows Dimensions arrows - + style style - + Dot Dot - + Circle Sirkel - + Arrow Arrow - + The default size of arrows The default size of arrows - - Dimensions lines - Dimensions lines - - - - text above - text above - - - - text inside - text inside - - - + The default size of dimensions extension lines The default size of dimensions extension lines @@ -1508,80 +1507,55 @@ Values with differences below this value will be treated as same. Fill objects with faces whenever possible - - DXF / DWG options - DXF / DWG options - - - + Create Lag - - If thi sis checked, only standard Part objects will be created (fastest) - If thi sis checked, only standard Part objects will be created (fastest) - - - + simple Part shapes simple Part shapes - + If this is checked, parametric Draft objects will be created whenever possible If this is checked, parametric Draft objects will be created whenever possible - + Draft objects Draft objects - + If this is checked, sketches will be created whenever possible If this is checked, sketches will be created whenever possible - + Sketches Sketches - + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. - + Get original colors from the DXF file Get original colors from the DXF file - - If this is checked, DXF layers will be imported as Draft layers - If this is checked, DXF layers will be imported as Draft layers - - - - Use Draft Layers - Use Draft Layers - - - + Treat ellipses and splines as polylines Treat ellipses and splines as polylines - + Max Spline Segment: Max Spline Segment: - - - SVG / OCA options - SVG / OCA options - Export style @@ -1597,21 +1571,146 @@ Values with differences below this value will be treated as same. Show the unit suffix in dimensions Show the unit suffix in dimensions + + + DXF / DWG + DXF / DWG + + + + Automatic update + Automatic update + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + + + + Allow FreeCAD to automatically download and update the DXF libraries + Tillate FreeCAD å automatisk laste ned og oppdatere DXF bibliotekene + + + + If this is checked, only standard Part objects will be created (fastest) + If this is checked, only standard Part objects will be created (fastest) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + If this is checked, DXF layers will be imported as Draft VisGroups + + + + Use VisGroups + Use VisGroups + + + + mm + mm + + + + SVG / OCA + SVG / OCA + + + + Grid size + Grid size + + + + the number of horizontal or vertical lines of the grid + the number of horizontal or vertical lines of the grid + + + + lines + lines + + + + Dimensions + Dimensions + + + + display mode + display mode + + + + text above (2D) + text above (2D) + + + + text inside (3D) + text inside (3D) + + + + extension lines size + extension lines size + + + + Drawing views + Drawing views + + + + Dashed line definition + Dashed line definition + + + + A SVG linestyle definition + A SVG linestyle definition + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + Dashdot line definition + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Dotted line definition + + + + 0.02,0.02 + 0.02,0.02 + Workbench - + Draft Snap Draft Snap - + Draft creation tools Draft creation tools - + Draft modification tools Draft modification tools @@ -1619,638 +1718,600 @@ Values with differences below this value will be treated as same. draft - + Draft Command Bar Draft Command Bar - + active command: aktiv kommando: - + None Ingen - + Active Draft command Aktiv kommando - + X coordinate of next point X koordinat for neste punkt - + X X - + Y Y - + Z Z - + Y coordinate of next point Y koordinat for neste punkt - + Z coordinate of next point Z koordinat for neste punkt - + Radius Radius - + Radius of Circle Sirkelradius - + &Relative &Relativ - + Coordinates relative to last point or absolute (SPACE) Koordinater relativt til siste punkt eller absolutt (mellomrom) - + F&illed F&illed - + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) Check this if the object should appear as filled, otherwise it will appear as wireframe (i) - + &Finish &Finish - + Finishes the current drawing or editing operation (F) Finishes the current drawing or editing operation (F) - + If checked, command will not finish until you press the command button again Hvis denne er merket vil kommandoen ikke bli fullført før du trykker kommandoknappen igjen - - &Continue - &Fortsett - - - + If checked, an OCC-style offset will be performed instead of the classic offset If checked, an OCC-style offset will be performed instead of the classic offset - + &OCC-style offset &OCC-style offset - + Add points to the current object - Add points to the current object + Legg punkter til det gjeldende objekt - + Remove points from the current object Remove points from the current object - + Make Bezier node sharp Make Bezier node sharp - + Make Bezier node tangent Make Bezier node tangent - + Make Bezier node symmetric Make Bezier node symmetric - + &Undo &Angre - + Undo the last segment (CTRL+Z) Angre siste segment (CTRL+Z) - + &Close &Lukk - + Finishes and closes the current line (C) Fullfører og lukker gjeldende linje (C) - + &Wipe &Wipe - + Wipes the existing segments of this line and starts again from the last point (W) Wipes the existing segments of this line and starts again from the last point (W) - + Number of sides Antall sider - + Offset Avsetting - + XY XY - + Select XY plane Velg XY plan - + XZ XZ - + Select XZ plane Velg XZ plan - + YZ YZ - + Select YZ plane Velg YZ plan - + View Vis - + Select plane perpendicular to the current view Velg plan vinkelrett på gjeldende visning - + Do not project points to a drawing plane Ikke vis punkter på et tegningsplan - + &Copy &Kopier - + If checked, objects will be copied instead of moved (C) Hvis merket vil objektet kopieres i stedet for å flyttes (C) - + Text string to draw Text string to draw - + String Streng - + Height of text Height of text - + Height Høyde - + Intercharacter spacing Intercharacter spacing - + Tracking Tracking - + Full path to font file: Full path to font file: - + Open a FileChooser for font file Open a FileChooser for font file - + Set/unset a working plane Set/unset a working plane - + Line Color Linjefarge - + Face Color Farge på flate - + Line Width Linjebredde - + Font Size Skriftstørrelse - + Apply to selected objects Bruk på valgte objekter - + Toggles Construction Mode Veksler konstruksjonsmodus - + Select Plane Velg plan - + Line Linje - + DWire DWire - + Circle Sirkel - + Center X Senter X - + Arc Bue - + Point Point - + Distance Avstand - + Trim Trim - + Pick Object Velg objekt - + Edit Rediger - + Global X Global X - + Global Y Global Y - + Global Z Global Z - + Local X Local X - + Local Y Local Y - + Local Z Local Z - + Invalid Size value. Using 200.0. Invalid Size value. Using 200.0. - + Invalid Tracking value. Using 0. Invalid Tracking value. Using 0. - + Please enter a text string. Please enter a text string. - + Select a Font file Select a Font file - + Please enter a font file. Please enter a font file. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + Found groups: closing each open object inside Fant grupper: lukker alle åpne objekt inni - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidificable object: solidifying it Found 1 solidificable object: solidifying it - + Found 2 objects: fusing them Fant to objekter: smelter de - - Found several objects: making a shell - - Found several objects: making a shell - - - - - Found several coplanar objects or faces: making one face - - Found several coplanar objects or faces: making one face - - - - + Found 1 non-parametric objects: draftifying it Fant et ikke parametrisk objekt: skisserer det - - Found 1 closed sketch object: making a face from it - - Fant et lukket skisseobjekt: lager en flate av det - - - - Found closed wires: making faces - - Found closed wires: making faces - - - - + Found 1 open wire: closing it Fant en åpen tråd: lukker den - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Fant flere kanter: binder de - - Found several non-treatable objects: making compound - - Fant flere ikke behandlingsbare objekter: gjør sammensatt - - - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 parametric object: breaking its dependencies Fant et parametrisk objekt: bryter dens avhengigheter - + Found 2 objects: subtracting them Fant to objekter: trekker de fra - + Found several faces: splitting them Fant flere flater: splitter de - + Found several objects: subtracting them from the first one Fant flere objekter: trekker de fra første - + Found 1 face: extracting its wires Fant en flate: ved å ekstrahere dens tråder - + Found only wires: extracting their edges Fant bare tråder: ved å ekstrahere deres kanter - + No more downgrade possible No more downgrade possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + Pick a face to define the drawing plane Velg en flate å definere plan - + Pick first point: Velg første punkt: - + Create Line Create Line - + Create DWire Create DWire - + DWire has been closed DWire has been closed - + Last point has been removed Siste punkt har blitt fjernet - + Pick next point: Velg neste punkt: - + Pick next point, or (F)inish or (C)lose: Velg neste punkt eller (A) for avslutt eller (L) for å lukke: - + BSpline BSpline @@ -2261,7 +2322,7 @@ Values with differences below this value will be treated as same. Spline er avsluttet - + Create BSpline Create BSpline @@ -2271,363 +2332,357 @@ Values with differences below this value will be treated as same. BezCurve - + Bezier curve has been closed Bezier curve has been closed - + Create BezCurve Create BezCurve - + Rectangle Rektangel - + Create Plane Create Plane - + Create Rectangle Create Rectangle - + Pick opposite point: Velg motsatt punkt: - + Pick center point: Velg midtpunkt: - + Pick radius: Velg radius: - + Pick start angle: Velg startvinkel: - + Pick aperture: Velg åpning: - + Create Circle Create Circle - + Create Arc Create Arc - + Start Angle Start Angle - + Aperture - Aperture + Blenderåpning - + Aperture angle: Vinkel på åpning: - + Polygon Polygon - + Create Polygon Create Polygon - + Ellipse Ellipse - + Create Ellipse Create Ellipse - + Text Tekst - + Pick location point: Velg plasseringspunkt: - + Create Text Create Text - + Dimension Dimensjon - + Create Dimension Create Dimension - + Edges don't intersect! Kantene krysser ikke hverandre! - + ShapeString ShapeString - + Pick ShapeString location point: Pick ShapeString location point: - + Create ShapeString Create ShapeString - + Move Flytt - + Select an object to move Velg et objekt å flytte - + Pick start point: Velg startpunkt: - + Copy Kopier - + Pick end point: Velg sluttpunkt: - + Change Style Change Style - + Select an object to rotate Velg et objekt å rotere - + Pick rotation center: Velg rotasjonssenter: - + Rotate Roter - + Pick base angle: Velg base vinkel: - + Pick rotation angle: Velg rotasjonsvinkel: - + Select an object to offset Velg et objekt til å avsette - + Offset only works on one object at a time Avsetting fungerer bare på ett objekt om gangen - + Cannot offset this object type Kan ikke avsette denne objekttypen - + Pick distance: Velg avstand: - + Select an object to upgrade Velg et objekt å oppgradere - + Upgrade Oppgrader - + Downgrade Nedgrader - - Select an object to trim/extend - - Velg et objekt til å trimme/ ekstendere - - - + Scale Skaler - + Select an object to scale Velg et objekt å skalere - + Pick base point: Velg basepunkt: - + Pick scale factor: Velg skalafaktor: - + Select an object to project Select an object to project - + Select a Draft object to edit Select a Draft object to edit - + This object type is not editable Denne objekttypen er ikke redigerbar - + Active object must have more than two points/nodes Aktivt objekt må ha mer enn to punkt/ noder - + Selection is not a Knot Selection is not a Knot - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert Select an object to convert - + Select an object to array Select an object to array - + Please select base and path objects Please select base and path objects - + Create Point Create Point - + Select an object to clone Select an object to clone - + Select face(s) on existing object(s) Select face(s) on existing object(s) @@ -2641,41 +2696,212 @@ Values with differences below this value will be treated as same. - - Installed Macros - Installed Macros - - - + &Draft &Draft - + Utilities Utilities - + Wire tools Wire tools - + Snapping Snapping - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Sides Sides + + + BSplines and Bezier curves are not supported by this tool + BSplines and Bezier curves are not supported by this tool + + + + The given object is not planar and cannot be converted into a sketch. + The given object is not planar and cannot be converted into a sketch. + + + + Found several objects: creating a shell + + Found several objects: creating a shell + + + + + Found several coplanar objects or faces: creating one face + + Found several coplanar objects or faces: creating one face + + + + + Found 1 linear object: converting to line + + Found 1 linear object: converting to line + + + + + Found 1 closed sketch object: creating a face from it + + Found 1 closed sketch object: creating a face from it + + + + + Found closed wires: creating faces + + Found closed wires: creating faces + + + + + Found several non-treatable objects: creating compound + + Found several non-treatable objects: creating compound + + + + + Length + Lengde + + + + Angle + Vinkel + + + + Length of current segment + Length of current segment + + + + Angle of current segment + Angle of current segment + + + + Check this to lock the current angle (l) + Check this to lock the current angle (l) + + + + Con&tinue + Con&tinue + + + + &Select edge + &Select edge + + + + Selects an existing edge to be measured by this dimension (E) + Selects an existing edge to be measured by this dimension (E) + + + + Auto + Auto + + + + Sorry, offset of Bezier curves is currently still not supported + + Sorry, offset of Bezier curves is currently still not supported + + + + + Convert to Sketch + Convert to Sketch + + + + Convert to Draft + Convert to Draft + + + + Convert + Convert + + + + Array + Matrise + + + + Select object(s) to trim/extend + + Select object(s) to trim/extend + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + Unable to trim these objects, only Draft wires and arcs are supported + + + + + Unable to trim these objects, too many wires + + Unable to trim these objects, too many wires + + + + + These objects don't intersect + + These objects don't intersect + + + + + Too many intersection points + + Too many intersection points + + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.qm b/src/Mod/Draft/Resources/translations/Draft_pl.qm index ff013ed789..eece37a992 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pl.qm and b/src/Mod/Draft/Resources/translations/Draft_pl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.ts b/src/Mod/Draft/Resources/translations/Draft_pl.ts index 2ed0482d54..b8ca35dc4f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pl.ts @@ -1,15 +1,29 @@ + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + + Draft_AddPoint - + Add Point Dodaj punkt - + Adds a point to an existing wire/bspline Wstawia punkt do bieżącego szkieletu/B-Splajna @@ -17,12 +31,12 @@ Draft_AddToGroup - + Add to group... Dodaj do grupy... - + Adds the selected object(s) to an existing group Dodawanie zaznaczonych obiektów do bieżącej grupy @@ -30,12 +44,12 @@ Draft_ApplyStyle - + Apply Current Style Zastosuj Bieżący styl - + Applies current line width and color to selected objects Stosuje bieżącą szerokość linii i kolorów do zaznaczonych obiektów @@ -43,12 +57,12 @@ Draft_Arc - + Arc Łuk - + Creates an arc. CTRL to snap, SHIFT to constrain Tworzy łuk. CTRL przyciągaj, SHIFT ogranicz @@ -56,12 +70,12 @@ Draft_Array - + Array Tablica - + Creates a polar or rectangular array from a selected object Tworzy biegunową lub prostokątną tablicę z zaznaczonego obiektu @@ -69,12 +83,12 @@ Draft_BSpline - + B-Spline B-Splajn - + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain Tworzy wielopunktowy b-spline. CTRL, aby przyciąć, SHIFT, aby ograniczyć @@ -84,23 +98,23 @@ BezCurve - BezCurve + Krzywa Beizera Creates a Bezier curve. CTRL to snap, SHIFT to constrain - Creates a Bezier curve. CTRL to snap, SHIFT to constrain + Tworzy krzywą Beziera. Klawisz CTRL aby przyciągnąć, SHIFT aby ograniczyć Draft_Circle - + Circle Okrąg - + Creates a circle. CTRL to snap, ALT to select tangent objects Tworzy okrąg. CTRL przyciągaj, ALT wybierz styczną obiektu @@ -108,12 +122,12 @@ Draft_Clone - + Clone Klon - + Clones the selected object(s) Klonuje wskazany obiekt(y) @@ -121,12 +135,12 @@ Draft_CloseLine - + Close Line Zamknij Linię - + Closes the line being drawn Zamyka rysowaną linię @@ -134,12 +148,12 @@ Draft_DelPoint - + Remove Point Usuń punkt - + Removes a point from an existing wire or bspline Usuwa punkt z bieżącego szkieletu lub B-Splajna @@ -147,12 +161,12 @@ Draft_Dimension - + Dimension Wymiar - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Tworzy wymiar. CTRL przyciągaj, SHIFT, aby ograniczyć, ALT, aby zaznaczyć segment @@ -160,12 +174,12 @@ Draft_Downgrade - + Downgrade Zainstalowanie starszej wersji - + Explodes the selected objects into simpler objects, or subtract faces Rozwija zaznaczone obiekty na prostsze lub odejmuje powierzchnie @@ -173,7 +187,7 @@ Draft_Draft2Sketch - + Draft to Sketch Projekt do szkicu @@ -181,12 +195,12 @@ Draft_Drawing - + Drawing Rysunek - + Puts the selected objects on a Drawing sheet. Umieszcza zaznaczone obiekty na arkuszu rysunku. @@ -194,12 +208,12 @@ Draft_Edit - + Edit Edytuj - + Edits the active object Edytuj aktywny obiekt @@ -207,38 +221,38 @@ Draft_Ellipse - + Ellipse Elipsa - + Creates an ellipse. CTRL to snap - Creates an ellipse. CTRL to snap + Tworzy elipsę. CTRL żeby włączyć przyciąganie Draft_Facebinder - + Facebinder - Facebinder + Grupa powierzchni - + Creates a facebinder object from selected face(s) - Creates a facebinder object from selected face(s) + Tworzy obiekt grupę powierzchni z zaznaczonej(-nych) powierzchni Draft_FinishLine - + Finish line Zakończenie linii - + Finishes a line without closing it Zakończenie linii bez zamykania @@ -246,51 +260,38 @@ Draft_FlipDimension - + Flip Dimension - Flip Dimension + Odwróć przestrznie - + Flip the normal direction of a dimension - Flip the normal direction of a dimension + odwróć normalny wymiar przestrzeni Draft_Heal - + Heal - Heal + Ulecz - - Heal faultly Draft objects saved from an earlier FreeCAD version - Heal faultly Draft objects saved from an earlier FreeCAD version - - - - Draft_Layer - - - Layer - Layer - - - - Adds a layer - Adds a layer + + Heal faulty Draft objects saved from an earlier FreeCAD version + Heal faulty Draft objects saved from an earlier FreeCAD version Draft_Line - + Line Linia - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Tworzy 2-punktowe line. CTRL przyciągaj, SHIFT ogranicz @@ -298,12 +299,12 @@ Draft_Move - + Move Przesuń - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy Przenosi zaznaczone obiekty między 2 punkty. CTRL przyciągaj, SHIFT, ogranicz, ALT, kopiuj @@ -311,12 +312,12 @@ Draft_Offset - + Offset Offset - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Offset aktywnego obiektu. CTRL przyciągnij, SHIFT, ogranicz, ALT, kopiuj @@ -324,25 +325,25 @@ Draft_PathArray - + PathArray - PathArray + ŚcieżkaSzyku - + Creates copies of a selected object along a selected path. - Creates copies of a selected object along a selected path. + Utwórz kopię wybranego obiektu względem zdefiniowanej ścieżki Draft_Point - + Point Punkt - + Creates a point object Tworzy obiekt punktowy @@ -350,12 +351,12 @@ Draft_Polygon - + Polygon Wielokąt - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Tworzy regularny wielobok. CTRL przyciągaj, SHIFT ogranicz @@ -363,12 +364,12 @@ Draft_Rectangle - + Rectangle Prostokąt - + Creates a 2-point rectangle. CTRL to snap Tworzy prostokąt względem 2 punktów. CTRL przyciągnij @@ -376,12 +377,12 @@ Draft_Rotate - + Rotate Obróć - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Obraca wybrane obiekty. CTRL przyciągaj, SHIFT, ogranicz, ALT tworzy kopię @@ -389,12 +390,12 @@ Draft_Scale - + Scale Skala - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Skaluje zaznaczone obiekty z punktu bazowego. CTRL przyciąganie, SHIFT, aby ograniczyć, ALT, aby skopiować @@ -402,12 +403,12 @@ Draft_SelectGroup - + Select group Zaznacz grupę... - + Selects all objects with the same parents as this group Zaznacza wszystkie obiekty w danej grupie od tych samych rodziców @@ -415,12 +416,12 @@ Draft_SelectPlane - + SelectPlane Wybierz płaszczyznę - + Select a working plane for geometry creation Wybierz płaszczyznę roboczą do tworzenia geometrii @@ -428,17 +429,17 @@ Draft_Shape2DView - + Shape 2D view Widok 2D kształtu - + Creates Shape 2D views of selected objects Tworzy kształt 2D z widoków zaznaczonych obiektów - + Convert bidirectionally between Draft and Sketch objects Konwersja dwukierunkowa pomiędzy obiektami Draft i Sketch @@ -446,25 +447,25 @@ Draft_ShapeString - + Shape from text... - Shape from text... + Kształt z tekstu... - + Creates text string in shapes. - Creates text string in shapes. + Utwórz tekst po krzywiźnie. Draft_ShowSnapBar - + Show Snap Bar Pokaż belkę przyciągania - + Shows Draft snap toolbar Pokazuje przyciąganie do paska narzędzi w module Szkic @@ -472,194 +473,194 @@ Draft_Snap_Angle - + Angles - Angles + Kąty - + Snaps to 45 and 90 degrees points on arcs and circles - Snaps to 45 and 90 degrees points on arcs and circles + Przyciągaj do punktów 45-tego i 90-tego stopnia na łukach i okręgach Draft_Snap_Center - + Center - Center + Środek - + Snaps to center of circles and arcs - Snaps to center of circles and arcs + Przyciągaj do środka łuków i okręgów Draft_Snap_Dimensions - + Dimensions Wymiary - + Shows temporary dimensions when snapping to Arch objects - Shows temporary dimensions when snapping to Arch objects + Pokazuj chwilowe wymiary podczas przyciągania do łuków Draft_Snap_Endpoint - + Endpoint - Endpoint + Punkt końcowy - + Snaps to endpoints of edges - Snaps to endpoints of edges + Przyciągaj do punktów końcowych krawędzi Draft_Snap_Extension - + Extension - Extension + Rozszerzenie - + Snaps to extension of edges - Snaps to extension of edges + Przyciągaj do rozszerzenia krawędzi Draft_Snap_Grid - + Grid - Grid + Siatka - + Snaps to grid points - Snaps to grid points + Przyciągaj do punktów sieci Draft_Snap_Intersection - + Intersection Przecięcie - + Snaps to edges intersections - Snaps to edges intersections + Przyciągaj do miejsc przecięcia krawędzi Draft_Snap_Lock - + Toggle On/Off - Toggle On/Off + Przełączanie Włącz/Wyłącz - + Activates/deactivates all snap tools at once - Activates/deactivates all snap tools at once + Włącza/Wyłącza wszystkie narzędzia przyciągania Draft_Snap_Midpoint - + Midpoint - Midpoint + Punkt środkowy - + Snaps to midpoints of edges - Snaps to midpoints of edges + Przyciągnij do punktów środkowych krawędzi Draft_Snap_Near - + Nearest - Nearest + Najbliższy - + Snaps to nearest point on edges - Snaps to nearest point on edges + Przyciągnij do najbliższego punktu krawędzi Draft_Snap_Ortho - + Ortho - Ortho + Orto - + Snaps to orthogonal and 45 degrees directions - Snaps to orthogonal and 45 degrees directions + Przyciągnij do pozycji ortogonalnej i kierunku 45 stopni Draft_Snap_Parallel - + Parallel - Parallel + Równolegle - + Snaps to parallel directions of edges - Snaps to parallel directions of edges + Przyciągnij równolegle do kierunku krawędzi Draft_Snap_Perpendicular - + Perpendicular - Perpendicular + Prostopadle - + Snaps to perpendicular points on edges - Snaps to perpendicular points on edges + Przyciągnij prostopadle do punktu na krawędzi Draft_Snap_WorkingPlane - + Working Plane - Working Plane + Płaszczyzna robocza - + Restricts the snapped point to the current working plane - Restricts the snapped point to the current working plane + Przypisz przyciągany punkt do bieżącej płaszczyzny roboczej Draft_Text - + Text Tekst - + Creates an annotation. CTRL to snap Tworzy adnotacje. CTRL przyciągnij @@ -667,12 +668,12 @@ Draft_ToggleConstructionMode - + Toggle construcion Mode Przełącz do trybu budowy - + Toggles the Construction Mode for next objects. Przełącza tryb budowy dla kolejnych obiektów. @@ -680,12 +681,12 @@ Draft_ToggleContinueMode - + Toggle Continue Mode - Toggle Continue Mode + Przełącz w tryb ciągły - + Toggles the Continue Mode for next commands. Przełącza tryb Kontynuuj dla następnego polecenia. @@ -693,12 +694,12 @@ Draft_ToggleDisplayMode - + Toggle display mode Przełącz tryb wyświetlania - + Swaps display mode of selected objects between wireframe and flatlines Zamiana trybu wyświetlania wybranych obiektów pomiędzy modelem siatkowym i liniowym @@ -706,25 +707,25 @@ Draft_ToggleGrid - + Toggle Grid Przełącz siatki - - Toggles the Draft gid on/off - Włącza/Wyłącza siatkę + + Toggles the Draft grid on/off + Toggles the Draft grid on/off Draft_Trimex - + Trimex Przytnij/Rozciągnij - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Przycina lub rozszerza zaznaczony obiekt, lub wytłacza pojedyncze powierzchnie. CTRL skokowo, SHIFT ogranicza do aktualnego segmentu lub do prostopadłej, ALT odwraca @@ -732,12 +733,12 @@ Draft_UndoLine - + Undo last segment Cofnij ostatni segment - + Undoes the last drawn segment of the line being drawn Cofa ostatni segment rysowanej linii @@ -745,25 +746,38 @@ Draft_Upgrade - + Upgrade Aktualizuj - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces Łączy wybrane obiekty w jeden, lub zamienia zamknięte polilinie w pełne powierzchnie, lub połączone powierzchnie. + + Draft_VisGroup + + + VisGroup + VisGroup + + + + Adds a VisGroup + Adds a VisGroup + + Draft_Wire - + DWire DWire - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain Tworzy wielokrotne punty DraftWire (DWire). Naciśnięcie klawisza CTRL spowoduje przyciąganie, naciśnięcie klawisza SHIFT to ogranicza @@ -771,12 +785,12 @@ Draft_WireToBSpline - + Wire to BSpline Linia do B-Splajn - + Converts between Wire and BSpline Konwersja Linia <-> B-Splajn @@ -804,17 +818,17 @@ Domyślny kolor dla przyciągania symboli - + This is the default color for objects being drawn while in construction mode. Jest to domyślny kolor dla obiektów, które są sporządzone w trybie budowy. - + This is the default group name for construction geometry Jest to domyślna nazwa grupy dla geometrii konstrukcji - + Construction Konstrukcja @@ -917,17 +931,17 @@ such as "Arial:Bold" Oryginalny kolor i szerokość linii - + if this is checked, paper space objects will be imported too Jeśli zaznaczono, zostaną również zaimportowane obiekty z obszaru papieru - + if this is unchecked, texts/mtexts won't be imported jeśli jest to odznaczone, teksty / mtexts nie zostaną zaimportowane - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. Podczas eksportu do DXF Splajny zostaną przekonwertowane do polilinii. Podana wartość jest max. długością każdego segmentu polilinii. Jeśli wartość wynosi '0', cała polilinia będzie traktowana jako pojedynczy segment. @@ -952,7 +966,7 @@ such as "Arial:Bold" Ustawienia ogólne - + Construction group name Nazwa grupy Konstrukcja @@ -968,22 +982,22 @@ Values with differences below this value will be treated as same. Jest to wartość używana przez funkcje wykorzystujące tolerancję. Wartości poniżej tej wartości są traktowane jako takie same. - + DXF format options Opcje formatu DXF - + Check this if you want the non-named blocks (beginning with a *) to be imported too Zaznacz to pole aby importować również bloki bez nazwy (rozpoczynające się od znaku *) - + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... Jeśli zaznaczono, FreeCAD spróbuje połączyć nakładające się obiekty w szkielet. Uwaga, to może potrwać chwilę... - + Join geometry Łącz geometrie @@ -1083,32 +1097,32 @@ Values with differences below this value will be treated as same. Zaznacz obiekty bazowe po skopiowaniu - + If checked, a grid will appear when drawing Jeśli zaznaczone, podczas rysowania będzie widoczna siatka - + Use grid Użyj siatki - + Grid spacing Odstępy siatki - + The spacing between each grid line Odstępy między liniami siatki - + Main lines every Wszystkie główne linie - + Mainlines will be drawn thicker. Specify here how many squares between mainlines. Linia główna będzie grubsza. Określ, ile kwadratów między liniami głównymi. @@ -1138,22 +1152,22 @@ Values with differences below this value will be treated as same. Prawo - + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable Jeśli to jest zaznaczone, obiekty z tej samej warstwy zostaną połączone w bloki Draft , będą one wyświetlane szybciej, ale za to trudniejsze do edytowania - + Group layers into blocks Zgrupuj warstwy w Bloki - + If this is checked, all objects containing faces will be exported as 3d polyfaces Jeśli to jest zaznaczone, wszystkie obiekty zawierające powierzchnie"faces" zostanią wyeksportowane jako 3d polyfaces - + Export 3D objects as polyface meshes Eksport obiektu 3D jako wielofasetowa siatka @@ -1193,37 +1207,37 @@ Values with differences below this value will be treated as same. Pokaż tracker płaszczyzny pracy - + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command Jeśli ta opcja jest zaznaczona, siatka modułu Draft zawsze będzie widoczna w czasie gdy moduł Draft jest modułem aktywnym. W przeciwnym razie tylko używając polecenia - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document Jeżeli ta opcja jest zaznaczona, importowany tekst będzie miał rozmiar rozmiar standardowy dla tekstu w module Draft, zamiast rozmiaru jaki ma w dokumencie odpowiednim dla formatu DXF - + Use standard font size for texts Użyj standardowego rozmiaru czcionki dla tekstów - + If this is checked, hatches will be converted into simple wires Jeżeli ta opcja jest zaznaczona, kreskowanie zostanie skonwertowane do prostych przewodów - + Import hatch boundaries as wires Importowanie granic kreskowania jako przewodów - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width Jeżeli ta opcja jest zaznaczona i kiedy polilinie maja zdefiniowaną szerokość, bedą one renderowane jako zamknięte przewody o prawidłowej szerokości - + Render polylines with width Renderowanie polilinii o szerokości @@ -1255,102 +1269,102 @@ Values with differences below this value will be treated as same. When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. - When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. + Gdy to pole jest zaznaczone, narzędzia projektu stworzą część pierwotną zamiast obiektów, jeśli będą dostępne. Use Part Primitives when available - Use Part Primitives when available + Używaj Prymitywów Części, gdy dostępne Snapping - Snapping + Przyciąganie If this is checked, snapping is activated without the need to press the snap mod key - If this is checked, snapping is activated without the need to press the snap mod key + Jeśli to pole jest zaznaczone przyciąganie jest aktywne nawet bez włączania trybu przyciągania Always snap (disable snap mod) - Always snap (disable snap mod) + Zawsze przyciągaj (deaktywuje tryb przyciągania) - + Construction geometry Geometria konstrukcji - + Construction geometry color - Construction geometry color + Kolor geometrii konstrukcji - + Import - Import - - - - texts and dimensions - texts and dimensions - - - - points - points + Importuj + texts and dimensions + Teksty i wymiary + + + + points + Punkty + + + layouts - layouts + Układy - + *blocks - *blocks + Bloki - + If this is checked, the exported objects will be projected to reflect the current view direction - If this is checked, the exported objects will be projected to reflect the current view direction + Jeśli to pole jest zaznaczone, eksportowane obiekty będą wyświetlone aby odzwierciedlić aktualny kierunek widoku - + Project exported objects along current view direction - Project exported objects along current view direction + Projekt eksportuje obiekty wzdłuż aktualnego kierunku widoku - + Ellipse export is badly supported. Use this to export them as polylines instead. - Ellipse export is badly supported. Use this to export them as polylines instead. + Eksport elipsy jest źle obsługiwany. Użyj tego aby eksportować je jako polilinie zamiast tego. - + DWG format options - DWG format options + Opcje formatu DWG - + Path to Teigha File Converter - Path to Teigha File Converter + Ścieżka do Teigha konwertera plików - + The path to your Teigha File Converter executable - The path to your Teigha File Converter executable + Ścieżka do pliku wykonywalnego Konwertera Plików Teigha Visual settings - Visual settings + Ustawienia wyglądu Visual Settings - Visual Settings + Ustawienia Wyglądu @@ -1360,258 +1374,343 @@ Values with differences below this value will be treated as same. Default line width - Default line width + Domyślna szerokość linii Snap symbols style - Snap symbols style + Styl symboli przyciągania Draft classic style - Draft classic style + Styl klasyczny szkicu Bitsnpieces style - Bitsnpieces style + Styl Bitsnpieces Color - Color + Kolor Hatch patterns resolution - Hatch patterns resolution + Rozdzielczość wzorów kreskowania Grid - Grid + Siatka - + Always show the grid - Always show the grid + Zawsze pokazuj siatkę Texts and dimensions - Texts and dimensions + Teksty i wymiary Texts - Texts + Teksty font - font + czcionka Internal font - Internal font + Wewnętrzna czcionka size - size + rozmiar - + Dimensions arrows - Dimensions arrows + Strzałki wymiarowe - + style - style + styl - + Dot - Dot + Kropka - + Circle Okrąg - - - Arrow - Arrow - - - - The default size of arrows - The default size of arrows - - - - Dimensions lines - Dimensions lines - - - - text above - text above - - text inside - text inside + Arrow + Strzałka + The default size of arrows + Domyślny rozmiar strzałek + + + The default size of dimensions extension lines - The default size of dimensions extension lines + Domyślny rozmiar linii pomocniczych Dimensions text - Dimensions text + Tekst wymiarowy orientation - orientation + ukierunkowanie spacing - spacing + odstęp The space between the dimension line and the dimension text - The space between the dimension line and the dimension text + Przestrzeń między linią wymiarową i tekstem wymiarowym Default ShapeString Font File - Default ShapeString Font File + Domyślny Plik Czcionki Formy Teksowej Select a font file - Select a font file + Wybierz plik czcionki Fill objects with faces whenever possible - Fill objects with faces whenever possible + Wypełnij obiekt powierzchniami, gdy tylko możliwe - - DXF / DWG options - DXF / DWG options - - - + Create Utwórz - - If thi sis checked, only standard Part objects will be created (fastest) - If thi sis checked, only standard Part objects will be created (fastest) - - - + simple Part shapes - simple Part shapes + proste kształty Części - + If this is checked, parametric Draft objects will be created whenever possible - If this is checked, parametric Draft objects will be created whenever possible + Jeśli to pole jest zaznaczone, obiekt parametryczny Szkicownika zostanie utworzony gdy jest to możliwe - + Draft objects - Draft objects + Szkicuj obiekty - + If this is checked, sketches will be created whenever possible - If this is checked, sketches will be created whenever possible + Jeśli to pole jest zaznaczone, szkice zostaną utworzone gdy jest to możliwe - + Sketches - Sketches + Szkice - + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. - If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. + Gdy zaznaczone kolory będą pobrane z obiektów DXF jeśli to możliwe. W innym wypadku zastosowane będą kolory domyślne. - + Get original colors from the DXF file - Get original colors from the DXF file + Pobierz oryginalne kolory z pliku DXF - - If this is checked, DXF layers will be imported as Draft layers - If this is checked, DXF layers will be imported as Draft layers - - - - Use Draft Layers - Use Draft Layers - - - + Treat ellipses and splines as polylines - Treat ellipses and splines as polylines + Traktuj elipsy i krzywe składane jako polilinie - + Max Spline Segment: - Max Spline Segment: - - - - SVG / OCA options - SVG / OCA options + Maksymalna ilość segmentów krzywej składanej: Export style - Export style + Styl eksportu Snapping settings - Snapping settings + Ustawienia przyciągania Show the unit suffix in dimensions - Show the unit suffix in dimensions + Pokaż przyrostek jednostki w wymiarach + + + + DXF / DWG + DXF / DWG + + + + Automatic update + Automatyczne aktualizacje + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + + + + Allow FreeCAD to automatically download and update the DXF libraries + Allow FreeCAD to automatically download and update the DXF libraries + + + + If this is checked, only standard Part objects will be created (fastest) + If this is checked, only standard Part objects will be created (fastest) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + If this is checked, DXF layers will be imported as Draft VisGroups + + + + Use VisGroups + Use VisGroups + + + + mm + mm + + + + SVG / OCA + SVG / OCA + + + + Grid size + Rozmiar siatki + + + + the number of horizontal or vertical lines of the grid + the number of horizontal or vertical lines of the grid + + + + lines + linie + + + + Dimensions + Wymiary + + + + display mode + tryb wyświetlania + + + + text above (2D) + Tekst powyżej (2D) + + + + text inside (3D) + tekst wewnątrz (3D) + + + + extension lines size + extension lines size + + + + Drawing views + Widoki rysunku + + + + Dashed line definition + Definicja linii przerywanej + + + + A SVG linestyle definition + A SVG linestyle definition + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + Definicja linii przerywanej + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Definicja linii kropkowanej + + + + 0.02,0.02 + 0.02,0.02 Workbench - + Draft Snap - Draft Snap + Przyciągnij projekt - + Draft creation tools Narzędzia tworzenia projektu - + Draft modification tools Narzędzia modyfikacji projektu @@ -1619,636 +1718,596 @@ Values with differences below this value will be treated as same. draft - + Draft Command Bar - Draft Command Bar + Pasek komend projektu - + active command: aktywne polecenie: - + None Żaden - + Active Draft command Aktywne polecenie kreślarskie - + X coordinate of next point Współrzędna X następnego punktu - + X X - + Y Y - + Z Z - + Y coordinate of next point Współrzędna Y następnego punktu - + Z coordinate of next point Współrzędna Z następnego punktu - + Radius Promień - + Radius of Circle Promień okręgu - + &Relative & Względny - + Coordinates relative to last point or absolute (SPACE) Współrzędne w stosunku do ostatniego punktu lub bezwzględnej (SPACJA) - + F&illed W&ypełnione - + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) Sprawdź to, czy obiekt powinien być jako bryła, w przeciwnym razie pojawi się jako szkielet (i) - + &Finish &Zakończ - + Finishes the current drawing or editing operation (F) Kończy aktualny rysunek lub operację edycji (F) - + If checked, command will not finish until you press the command button again Jeżeli opcja jest zaznaczona, polecenie nie zostanie zakończone do momentu naciśnięcia przycisku polecenia ponownie - - &Continue - Zamknięto szkielet - - - + If checked, an OCC-style offset will be performed instead of the classic offset Jeśli zaznaczone, będzie wykonywane przesunięcie w stylu OCC zamiast classic - + &OCC-style offset &OCC-styl przesunięcie - + Add points to the current object Dodaj punkty do aktywnego obiektu - + Remove points from the current object Usuń punkty z aktywnego obiektu - + Make Bezier node sharp - Make Bezier node sharp + Zrób węzeł krzywej Beizera ostrym - + Make Bezier node tangent - Make Bezier node tangent + Zrób węzeł krzywej Beizera styczny - + Make Bezier node symmetric - Make Bezier node symmetric + Zrób węzeł krzywej Beizera symetryczny - + &Undo Cofnij - + Undo the last segment (CTRL+Z) Cofa ostatni segment (CTRL + Z) - + &Close Zamknij - + Finishes and closes the current line (C) Zakańcza i zamyka bieżącą linię (C) - + &Wipe &Wymaż - + Wipes the existing segments of this line and starts again from the last point (W) Wymazuje istniejący segment linii i rozpoczyna ponownie od ostatniego punktu (W) - + Number of sides Liczba boków - + Offset Offset - + XY XY - + Select XY plane Wybierz płaszczyznę XY - + XZ XZ - + Select XZ plane Wybierz płaszczyznę XZ - + YZ YZ - + Select YZ plane Wybierz płaszczyznę YZ - + View Widok - + Select plane perpendicular to the current view Wybierz płaszczyznę prostopadłą do aktualnego widoku - + Do not project points to a drawing plane Nie rzutuj punktów na płaszczyznę rysunku - + &Copy Kopiuj - + If checked, objects will be copied instead of moved (C) Jeśli pole jest zaznaczone, obiekty zostaną skopiowane zamiast przeniesione (C) - + Text string to draw - Text string to draw + Krzywe tekstu do rysowania - + String Ciąg - + Height of text - Height of text + Wysokość tekstu - + Height Wysokość - + Intercharacter spacing - Intercharacter spacing + Odstęp pomiędzy znakami - + Tracking - Tracking + Śledzenie - + Full path to font file: - Full path to font file: + Pełna ścieżka do pliku czcionki: - + Open a FileChooser for font file - Open a FileChooser for font file + Otwórz okno wyboru pliku dla czcionki - + Set/unset a working plane - Set/unset a working plane + Włącz/Wyłącz płaszczyznę roboczą - + Line Color Kolor linii - + Face Color Kolor powierzchni - + Line Width Szerokość linii - + Font Size Rozmiar Czcionki - + Apply to selected objects Zastosuj do wybranych obiektów - + Toggles Construction Mode Przełącza do trybu budowy - + Select Plane Wybierz Płaszczyznę - + Line Linia - + DWire DWire - + Circle Okrąg - + Center X Środek X - + Arc Łuk - + Point Punkt - + Distance Odległość - + Trim Ucinanie - + Pick Object Wybierz obiekt - + Edit Edytuj - + Global X - Global X + Globalna X - + Global Y - Global Y + Globalna Y - + Global Z - Global Z + Globalna Z - + Local X - Local X + Lokalna X - + Local Y - Local Y + Lokalna Y - + Local Z - Local Z + Lokalna Z - + Invalid Size value. Using 200.0. - Invalid Size value. Using 200.0. + Nieprawidłowa wartość rozmiaru. Użyj 200.0. - + Invalid Tracking value. Using 0. - Invalid Tracking value. Using 0. + Nieprawidłowa wartość śledzenia. Użyj 0. - + Please enter a text string. - Please enter a text string. + Wprowadź tekst. - + Select a Font file - Select a Font file + Wybierz plik czcionki - + Please enter a font file. - Please enter a font file. + Wprowadź plik czcionki. - + Draft.makeBSpline: not enough points - Draft.makeBSpline: not enough points + Draft.makeBSpline: nie wystarczająca ilość punktów - + Draft.makeBSpline: Equal endpoints forced Closed - Draft.makeBSpline: Equal endpoints forced Closed + Draft.makeBSpline: Równe punkty końcowe, wymuszono Zamknięcie - + Draft.makeBSpline: Invalid pointslist - Draft.makeBSpline: Invalid pointslist + Draft.makeBSpline: Nieprawidłowa lista punktów - + Found groups: closing each open object inside Znaleziono grupy: zamykanie każdego obiektu wewnątrz grupy - + Found mesh(es): turning into Part shapes - Found mesh(es): turning into Part shapes + Znaleziono siatkę(-ki): zamieniam w kształty Części - + Found 1 solidificable object: solidifying it Znaleziono 1 solidificable obiekt: utrwal go - + Found 2 objects: fusing them Znaleziono 2 obiekty: zostaną połączone - - Found several objects: making a shell - - Found several objects: making a shell - - - - - Found several coplanar objects or faces: making one face - - Found several coplanar objects or faces: making one face - - - - + Found 1 non-parametric objects: draftifying it Znaleziono 1 obiekt nieparametryczny: draftyfying - - Found 1 closed sketch object: making a face from it - - Znaleziono 1 zamknięty obiekt Szkic: tworzenie fasetki - - - - Found closed wires: making faces - - Found closed wires: making faces - - - - + Found 1 open wire: closing it Znaleziono 1 otwarty szkielet: zamykanie - + Found several open wires: joining them - Found several open wires: joining them - + Znaleziono kilka otwartych szkiców: połączyć je? - + Found several edges: wiring them Znaleziono kilka krawędzi: łączenie w szkielet - - Found several non-treatable objects: making compound - - Znaleziono wiele nieuleczalnych obiektów: Tworzenie złożonych - - - + Unable to upgrade these objects. - Unable to upgrade these objects. - + Zablokuj aktualizacje tego obiektu - + Found 1 block: exploding it - Found 1 block: exploding it + Znaleziono 1 blok: rozstrzela go - + Found 1 parametric object: breaking its dependencies Znaleziono 1 obiekt parametryczny: kasowanie zależności - + Found 2 objects: subtracting them Znaleziono 2 obiekty: odejmowanie - + Found several faces: splitting them Znaleziono kilk fasetek: rozdzielanie - + Found several objects: subtracting them from the first one Znaleziono kilka obiektów: odejmuję od pierwszego obiektu - + Found 1 face: extracting its wires Znaleziono 1 fasetkę: ekstrakcja szkieletu - + Found only wires: extracting their edges Znaleziono wyłącznie szkielet: ekstrakcja krawędzi - + No more downgrade possible Downgrade niemożliwy - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. + _BSpline.createGeometry: Zamknięta tylko samym Punktem pierwszym/końcowym. Geometria nie została zaktualizowana. - + Pick a face to define the drawing plane Wybierz powierzchnię do zdefiniowania płaszczyzny rysunku - + Pick first point: Wybierz pierwszy punkt - + Create Line - Create Line + Utwórz linię - + Create DWire Utwórz Szkielet - + DWire has been closed Zamknięto szkielet - + Last point has been removed Ostatni punkt został usunięty - + Pick next point: Wybierz następny punkt - + Pick next point, or (F)inish or (C)lose: Wybierz następny punkt, albo (F)koniec lub (C)zamknij - + BSpline BSpline @@ -2259,421 +2318,586 @@ Values with differences below this value will be treated as same. Zamknięto B-Splajn - + Create BSpline Utwórz B-Splajn BezCurve - BezCurve + Krzywa Beizera - + Bezier curve has been closed - Bezier curve has been closed + Krzywa Beizera została zamknięta - + Create BezCurve - Create BezCurve + Stwórz Krzywą Beizera - + Rectangle Prostokąt - + Create Plane - Create Plane + Utwórz płaszczyznę - + Create Rectangle Utwórz Prostokąt - + Pick opposite point: Wybierz punkt przeciwległy - + Pick center point: Wybierz punkt środkowy - + Pick radius: Wybierz promień - + Pick start angle: Wybierz Kąt początkowy - + Pick aperture: Wybierz szczelinę: - + Create Circle Utwórz Okrąg - + Create Arc Utwórz Łuk - + Start Angle Kąt początkowy - + Aperture Celownik - + Aperture angle: Kąt szczeliny: - + Polygon Wielokąt - + Create Polygon Utwórz Wielokąt - + Ellipse Elipsa - + Create Ellipse - Create Ellipse + Utwórz elipsę - + Text Tekst - + Pick location point: Wybierz lokalizację punktu - + Create Text Utwórz Tekst - + Dimension Wymiar - + Create Dimension Utwórz Wymiarowanie - + Edges don't intersect! Krawędzie nie przecinają się! - + ShapeString - ShapeString + Forma teksowa - + Pick ShapeString location point: - Pick ShapeString location point: + Wskaż punk lokalizacji formy tekstowej: - + Create ShapeString - Create ShapeString + Stwórz formę tekstową - + Move Przesuń - + Select an object to move Zaznacz obiekt do przeniesienia - + Pick start point: Wybierz punkt początkowy - + Copy Kopiuj - + Pick end point: Wybierz punkt końcowy - + Change Style Zmiana Stylu - + Select an object to rotate Zaznacz obiekt, aby obrócić - + Pick rotation center: Wybierz środek obrotu - + Rotate Obróć - + Pick base angle: Wybierz podstawowy kąt - + Pick rotation angle: Wybierz kąt obrotu - + Select an object to offset Wybierz obiekt do offset - + Offset only works on one object at a time Offset działa tylko na jednym obiekcie w tym samym czasie - + Cannot offset this object type Nie można odsunąć obiektu tego typu - + Pick distance: Wybrać odległość - + Select an object to upgrade Zaznacz obiekt do uaktualnienia - + Upgrade Aktualizuj - + Downgrade Zainstalowanie starszej wersji - - Select an object to trim/extend - - Zaznacz obiekt, do zwężenia / rozszerzenia - - - + Scale Skala - + Select an object to scale Zaznacz obiekt do skalowania - + Pick base point: Wybierz punkt bazowy - + Pick scale factor: Wybrać współczynnik skalowania - + Select an object to project - Select an object to project + Wybierz obiekt który ma być wyświetlony - + Select a Draft object to edit - Select a Draft object to edit + Wybierz obiekt Projektu aby edytować - + This object type is not editable Ten typ obiektu nie jest edytowalny - + Active object must have more than two points/nodes Aktywny obiekt musi posiadać więcej niż 2 punkty/węzły - + Selection is not a Knot - Selection is not a Knot + Zaznaczenie nie jest Węzłem - + Endpoint of BezCurve can't be smoothed - Endpoint of BezCurve can't be smoothed + Punkt końcowy krzywej Beizera nie może być wygładzony - + Select an object to convert - Select an object to convert + Wybierz obiekt, aby przekonwertować - + Select an object to array - Select an object to array + Wybierz obiekt do stworzenia szyku - + Please select base and path objects - Please select base and path objects + Wybierz podstawę i ścieżkę obiektu - + Create Point - Create Point + Stwórz punkt - + Select an object to clone - Select an object to clone + Wybierz obiekt aby sklonować - + Select face(s) on existing object(s) - Select face(s) on existing object(s) + Wybierz powierzchnię na istniejącym obiekcie Teigha File Converter not found, DWG support is disabled. - Teigha File Converter not found, DWG support is disabled. + Nie znaleziono konwertera plików Teigha, obsługa DWG jest wyłączona. - - Installed Macros - Zainstalowane Makra - - - + &Draft Rysunek - + Utilities Narzędzia - + Wire tools Narzędzia Szkieletu - + Snapping - Snapping + Przyciąganie - + Found 1 multi-solids compound: exploding it - Found 1 multi-solids compound: exploding it + Znaleziono 1 złożenie wielu brył: rozstrzeliwuję to - + Sides - Sides + Boki + + + + BSplines and Bezier curves are not supported by this tool + BSplines and Bezier curves are not supported by this tool + + + + The given object is not planar and cannot be converted into a sketch. + The given object is not planar and cannot be converted into a sketch. + + + + Found several objects: creating a shell + + Found several objects: creating a shell + + + + + Found several coplanar objects or faces: creating one face + + Found several coplanar objects or faces: creating one face + + + + + Found 1 linear object: converting to line + + Found 1 linear object: converting to line + + + + + Found 1 closed sketch object: creating a face from it + + Found 1 closed sketch object: creating a face from it + + + + + Found closed wires: creating faces + + Found closed wires: creating faces + + + + + Found several non-treatable objects: creating compound + + Found several non-treatable objects: creating compound + + + + + Length + Długość + + + + Angle + Kąt + + + + Length of current segment + Length of current segment + + + + Angle of current segment + Angle of current segment + + + + Check this to lock the current angle (l) + Check this to lock the current angle (l) + + + + Con&tinue + Kontynuuj + + + + &Select edge + &Wybierz krawędź + + + + Selects an existing edge to be measured by this dimension (E) + Selects an existing edge to be measured by this dimension (E) + + + + Auto + Automatyczny + + + + Sorry, offset of Bezier curves is currently still not supported + + Sorry, offset of Bezier curves is currently still not supported + + + + + Convert to Sketch + Konwertuj do Szkicu + + + + Convert to Draft + Convert to Draft + + + + Convert + Konwertuj + + + + Array + Tablica + + + + Select object(s) to trim/extend + + Select object(s) to trim/extend + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + Unable to trim these objects, only Draft wires and arcs are supported + + + + + Unable to trim these objects, too many wires + + Unable to trim these objects, too many wires + + + + + These objects don't intersect + + Te obiekty się nie przecinają + + + + + Too many intersection points + + Zbyt wiele punktów przecięcia + + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm index d8828ec8e2..7a47d7eb4d 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm and b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts index d2ca4c28e1..3192b027c1 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts @@ -1,15 +1,29 @@ + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + A transferência das bibliotecas dxf falhou. +Por favor, baixá-los manualmente: +https://github.com/yorikvanhavre/Draft-dxf-importer +e coloque-os na sua pasta de macros. + + Draft_AddPoint - + Add Point Adicionar ponto - + Adds a point to an existing wire/bspline Adiciona um ponto a um arame/bspline existente @@ -17,12 +31,12 @@ Draft_AddToGroup - + Add to group... Adicionar ao grupo ... - + Adds the selected object(s) to an existing group Adiciona o(s) objeto(s) selecionado(s) a um grupo existente @@ -30,12 +44,12 @@ Draft_ApplyStyle - + Apply Current Style Aplicar o estilo atual - + Applies current line width and color to selected objects Aplica a espessura de linha e a cor atual aos objetos selecionados @@ -43,12 +57,12 @@ Draft_Arc - + Arc Arco - + Creates an arc. CTRL to snap, SHIFT to constrain Cria um arco. CTRL para snap, Shift para restringir @@ -56,12 +70,12 @@ Draft_Array - + Array Matriz - + Creates a polar or rectangular array from a selected object Cria uma matriz retangular ou polar a partir de um objeto selecionado @@ -69,12 +83,12 @@ Draft_BSpline - + B-Spline B-Spline - + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain Cria uma b-spline de múltiplos pontos. CTRL para snap, Shift para restringir @@ -95,12 +109,12 @@ Draft_Circle - + Circle Círculo - + Creates a circle. CTRL to snap, ALT to select tangent objects Cria um círculo. CTRL para snap, ALT para selecionar objetos tangentes @@ -108,12 +122,12 @@ Draft_Clone - + Clone Clonar - + Clones the selected object(s) Clona o(s) objeto(s) selecionado(s) @@ -121,12 +135,12 @@ Draft_CloseLine - + Close Line Fechar linha - + Closes the line being drawn Fechar a linha que está sendo desenhada @@ -134,12 +148,12 @@ Draft_DelPoint - + Remove Point Remover ponto - + Removes a point from an existing wire or bspline Remove um ponto de um arame ou bspline existente @@ -147,12 +161,12 @@ Draft_Dimension - + Dimension Dimensão - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Cria uma cota. CTRL para snap, Shift para restringir, ALT para selecionar um segmento @@ -160,12 +174,12 @@ Draft_Downgrade - + Downgrade Rebaixar - + Explodes the selected objects into simpler objects, or subtract faces Explode os objetos selecionados em objetos simples, ou subtrai faces @@ -173,7 +187,7 @@ Draft_Draft2Sketch - + Draft to Sketch Projeto para rascunho @@ -181,12 +195,12 @@ Draft_Drawing - + Drawing Desenho - + Puts the selected objects on a Drawing sheet. Coloca os objetos selecionados em uma folha de desenho. @@ -194,12 +208,12 @@ Draft_Edit - + Edit Editar - + Edits the active object Edita o objeto ativo @@ -207,12 +221,12 @@ Draft_Ellipse - + Ellipse Elipse - + Creates an ellipse. CTRL to snap Cria uma elipse. CTRL para snap @@ -220,12 +234,12 @@ Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) Cria um objeto facebinder a partir de faces selecionadas @@ -233,12 +247,12 @@ Draft_FinishLine - + Finish line Finalizar linha - + Finishes a line without closing it Terminar a linha sem fechar @@ -246,12 +260,12 @@ Draft_FlipDimension - + Flip Dimension Inverter cota - + Flip the normal direction of a dimension Inverte a direção normal de uma cota @@ -259,38 +273,25 @@ Draft_Heal - + Heal Curar - - Heal faultly Draft objects saved from an earlier FreeCAD version + + Heal faulty Draft objects saved from an earlier FreeCAD version Cura objetos defeituosos salvos por uma versão anterior do FreeCAD - - Draft_Layer - - - Layer - Camada - - - - Adds a layer - Adiciona uma camada - - Draft_Line - + Line Linha - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Cria uma linha de 2 pontos. CTRL para snap, Shift para parametrizar @@ -298,12 +299,12 @@ Draft_Move - + Move Mover - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy Move os objetos selecionados entre 2 pontos. CTRL para snap, Shift para restringir, ALT para copiar @@ -311,12 +312,12 @@ Draft_Offset - + Offset Deslocamento - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Cria um deslocamento do objeto ativo. CTRL para snap, Shift para restringir, ALT para criar uma cópia @@ -324,12 +325,12 @@ Draft_PathArray - + PathArray Cópia múltipla com caminho - + Creates copies of a selected object along a selected path. Cria cópias de um objeto selecionado ao longo de um caminho selecionado. @@ -337,12 +338,12 @@ Draft_Point - + Point Ponto - + Creates a point object Criar um objeto ponto @@ -350,12 +351,12 @@ Draft_Polygon - + Polygon Polígono - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Cria um polígono regular. CTRL para fazer snap, Shift para restringir @@ -363,12 +364,12 @@ Draft_Rectangle - + Rectangle Retângulo - + Creates a 2-point rectangle. CTRL to snap Cria um retângulo com 2 pontos. CTRL para snap @@ -376,12 +377,12 @@ Draft_Rotate - + Rotate Rotacionar - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Rotaciona o objeto selecionado. CTRL para snap, Shift para restringir, ALT cria uma cópia @@ -389,12 +390,12 @@ Draft_Scale - + Scale Escalar - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Escalona os objetos selecionados a partir de um ponto de base. CTRL para snap, Shift para restringir, ALT para copiar @@ -402,12 +403,12 @@ Draft_SelectGroup - + Select group Selecionar grupo - + Selects all objects with the same parents as this group Seleciona todos os objetos com os mesmos pais que este grupo @@ -415,12 +416,12 @@ Draft_SelectPlane - + SelectPlane Plano de trabalho - + Select a working plane for geometry creation Selecionar um plano de trabalho para a criação de objetos 2D @@ -428,17 +429,17 @@ Draft_Shape2DView - + Shape 2D view Forma vista 2D - + Creates Shape 2D views of selected objects Cria formas com vistas 2D dos objetos selecionados - + Convert bidirectionally between Draft and Sketch objects Converter bidirecionalmente entre objetos do projeto e do rascunho @@ -446,12 +447,12 @@ Draft_ShapeString - + Shape from text... Forma de texto... - + Creates text string in shapes. Cria um texto com formas 3D. @@ -459,12 +460,12 @@ Draft_ShowSnapBar - + Show Snap Bar Mostrar barra de Snap - + Shows Draft snap toolbar Mostra a barra de ferramentas Draft snap @@ -472,12 +473,12 @@ Draft_Snap_Angle - + Angles Ângulos - + Snaps to 45 and 90 degrees points on arcs and circles Ativa o snap em ângulos de 45 e 90 graus em círculos e arcos @@ -485,12 +486,12 @@ Draft_Snap_Center - + Center Centro - + Snaps to center of circles and arcs Ativa o snap no centro de círculos e arcos @@ -498,12 +499,12 @@ Draft_Snap_Dimensions - + Dimensions Dimensões - + Shows temporary dimensions when snapping to Arch objects Mostra cotas temporárias quando fizer snap para objetos arquitetônicos @@ -511,12 +512,12 @@ Draft_Snap_Endpoint - + Endpoint Ponto de extremidade - + Snaps to endpoints of edges Ativa snap em pontos de extremidade de arestas @@ -524,12 +525,12 @@ Draft_Snap_Extension - + Extension Extensão - + Snaps to extension of edges Snap nas extensões das arestas @@ -537,12 +538,12 @@ Draft_Snap_Grid - + Grid Grade - + Snaps to grid points Snap nos nós da grade @@ -550,12 +551,12 @@ Draft_Snap_Intersection - + Intersection Intersecção - + Snaps to edges intersections Snap nas interseções de arestas @@ -563,12 +564,12 @@ Draft_Snap_Lock - + Toggle On/Off Ligar/desligar - + Activates/deactivates all snap tools at once Activa/desactiva todas as ferramentas de snap @@ -576,12 +577,12 @@ Draft_Snap_Midpoint - + Midpoint Ponto central - + Snaps to midpoints of edges Snap em pontos centrais das arestas @@ -589,12 +590,12 @@ Draft_Snap_Near - + Nearest Mais próximo - + Snaps to nearest point on edges Snap no ponto mais próximo de arestas @@ -602,12 +603,12 @@ Draft_Snap_Ortho - + Ortho Ortogonal - + Snaps to orthogonal and 45 degrees directions Snap em direções ortogonais e a 45 graus @@ -615,12 +616,12 @@ Draft_Snap_Parallel - + Parallel Paralelo - + Snaps to parallel directions of edges Snap em direções paralelas a arestas @@ -628,12 +629,12 @@ Draft_Snap_Perpendicular - + Perpendicular Perpendicular - + Snaps to perpendicular points on edges Snap em pontos perpendiculares nas arestas @@ -641,12 +642,12 @@ Draft_Snap_WorkingPlane - + Working Plane Plano de trabalho - + Restricts the snapped point to the current working plane Mantém o ponto de snap no plano de trabalho atual @@ -654,12 +655,12 @@ Draft_Text - + Text Texto - + Creates an annotation. CTRL to snap Cria uma anotação. CTRL para snap @@ -667,12 +668,12 @@ Draft_ToggleConstructionMode - + Toggle construcion Mode Ativar / desativar o modo de construção - + Toggles the Construction Mode for next objects. Alterna o modo de construção para os próximos objetos. @@ -680,12 +681,12 @@ Draft_ToggleContinueMode - + Toggle Continue Mode Alternar modo continuar - + Toggles the Continue Mode for next commands. Alterna o modo de continuar para os próximos comandos @@ -693,12 +694,12 @@ Draft_ToggleDisplayMode - + Toggle display mode Alternar o modo de exibição - + Swaps display mode of selected objects between wireframe and flatlines Muda o modo de exibição dos objetos selecionados entre wireframe e flatlines @@ -706,25 +707,25 @@ Draft_ToggleGrid - + Toggle Grid Alternar grade - - Toggles the Draft gid on/off - Liga ou desliga o draft gid + + Toggles the Draft grid on/off + Liga ou desliga a grelha do módulo Traço Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Apara ou estende o objeto selecionado ou extruda faces. "CTRL" para snap, "SHIFT" restringe ao segmento atual ou à perpendicular, "ALT" inverte @@ -732,12 +733,12 @@ Draft_UndoLine - + Undo last segment Desfazer o último segmento - + Undoes the last drawn segment of the line being drawn Desfaz o último segmento da linha que está sendo desenhada @@ -745,25 +746,38 @@ Draft_Upgrade - + Upgrade Promover - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces Junta os objetos selecionados em um, ou converte arames fechados para faces cheias, ou unir faces + + Draft_VisGroup + + + VisGroup + GrupoVis + + + + Adds a VisGroup + Adiciona um GrupoVis + + Draft_Wire - + DWire DWire - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain Cria um DraftWire de vários pontos (DWire). CTRL para snap, tecla SHIFT para restringir @@ -771,12 +785,12 @@ Draft_WireToBSpline - + Wire to BSpline Arame para BSpline - + Converts between Wire and BSpline Converte entre o arame e BSpline @@ -804,17 +818,17 @@ a cor padrão para os símbolos de captura - + This is the default color for objects being drawn while in construction mode. Esta é a cor padrão para objetos desenhados no modo de construção. - + This is the default group name for construction geometry Este é o nome padrão para o grupo de geometria de construção - + Construction Construção @@ -917,17 +931,17 @@ such as "Arial:Bold" Cor e espessura de linha originais - + if this is checked, paper space objects will be imported too Se essa opção estiver marcada, objetos do paper space serão importados também - + if this is unchecked, texts/mtexts won't be imported Se esta opção estiver desmarcada, os textos e mtexts não serão importados - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. Ao exportar splines para DXF, elas são transformadas em polilinhas. Esse valor é o tamanho máximo de cada um dos segmentos da polilinha. Se for 0, a spline toda é tratada como um segmento reto. @@ -952,7 +966,7 @@ such as "Arial:Bold" Configurações gerais - + Construction group name Nome do grupo de construção @@ -968,22 +982,22 @@ Values with differences below this value will be treated as same. Esse é o valor usado por funções que usam uma tolerância. Valores com diferenças abaixo desse valor serão tratados como iguais. - + DXF format options Opções de formato DXF - + Check this if you want the non-named blocks (beginning with a *) to be imported too Selecione se quiser importar também blocos não-nomeados (começando com um *) - + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... Se isto estiver marcado, freecad tentará juntar objetos coincidentes em arames. Cuidado, isso pode demorar um pouco... - + Join geometry Juntar a geometria @@ -1083,32 +1097,32 @@ Values with differences below this value will be treated as same. Selecionar objetos de base após a cópia - + If checked, a grid will appear when drawing Se selecionado, uma grade aparecerá durante o desenho - + Use grid Usar grade - + Grid spacing Espaçamento da grade - + The spacing between each grid line O espaçamento entre cada linha da grade - + Main lines every Linhas principais a cada - + Mainlines will be drawn thicker. Specify here how many squares between mainlines. As linhas principais serão representadas mais espessas. Especifique aqui quantos quadrados deseja entre as linhas principais. @@ -1138,22 +1152,22 @@ Values with differences below this value will be treated as same. Direito - + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable Se selecionado, objetos das mesmas camadas serão reunidos em blocos, para agilizar a exibição, mas dificultando a edição - + Group layers into blocks Agrupar camadas em blocos - + If this is checked, all objects containing faces will be exported as 3d polyfaces Se selecionado, todos os objetos contendo faces serão exportados como polifaces 3d - + Export 3D objects as polyface meshes Exportar objetos 3D como malhas Polifacetadas @@ -1193,37 +1207,37 @@ Values with differences below this value will be treated as same. Exibir planejamento do trabalho - + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command Se isto estiver selecionado, a grade do projeto será sempre visível quando a bancada de trabalho estiver ativa. Caso contrário, somente usando um comando - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document Se isto estiver selecionado, os textos importados terão o tamanho do texto de rascunho, invés do tamanho que tinham no documento DXF - + Use standard font size for texts Use o tamanho padrão de fonte para textos - + If this is checked, hatches will be converted into simple wires Se isto estiver seleconado, as hachuras serão convertidas em simples fios - + Import hatch boundaries as wires Importar limites de hachuras como fios - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width Se isto estiver selecionado, quando polilinhas tiverem uma largura definida, elas serão renderizadas como fios fechados com a largura correta - + Render polylines with width Renderizar polilinhas com largura @@ -1278,67 +1292,67 @@ Values with differences below this value will be treated as same. Snap sempre ativo (desativar tecla de snap) - + Construction geometry Geometria de construção - + Construction geometry color Cor da geometria de construção - + Import Importação - + texts and dimensions textos e cotas - + points pontos - + layouts layouts - + *blocks blocos * - + If this is checked, the exported objects will be projected to reflect the current view direction Se isto estiver marcado, os objetos exportados serão projetados na direção da vista atual - + Project exported objects along current view direction Projetar objetos exportados na direção da vista atual - + Ellipse export is badly supported. Use this to export them as polylines instead. A exportação de elipses ainda não funciona sempre corretamente. Use isto para exportá-las como polilinhas. - + DWG format options Opções de formato DWG - + Path to Teigha File Converter Caminho para o Teigha File Converter - + The path to your Teigha File Converter executable O caminho para o executável do conversor de arquivos Teigha File Converter @@ -1393,7 +1407,7 @@ Values with differences below this value will be treated as same. Grade - + Always show the grid Sempre mostrar a grade @@ -1423,52 +1437,37 @@ Values with differences below this value will be treated as same. tamanho - + Dimensions arrows Setas das cotas - + style estilo - + Dot Ponto - + Circle Círculo - + Arrow Seta - + The default size of arrows O tamanho padrão das setas - - Dimensions lines - Linhas das cotas - - - - text above - texto acima - - - - text inside - texto dentro - - - + The default size of dimensions extension lines O tamanho padrão das linhas de extensão das cotas @@ -1508,80 +1507,55 @@ Values with differences below this value will be treated as same. Preencher objetos com faces sempre que possível - - DXF / DWG options - Opções DXF / DWG - - - + Create Criar - - If thi sis checked, only standard Part objects will be created (fastest) - Se esta opção for marcada, apenas objetos padrões de tipo Peça serão criados (mais rápido) - - - + simple Part shapes peças simples - + If this is checked, parametric Draft objects will be created whenever possible Se essa opção for marcada, objetos paramétricos de tipo Traço serão criados sempre que possível - + Draft objects objetos traço - + If this is checked, sketches will be created whenever possible Se essa opção for marcada, esboços serão criados sempre que possível - + Sketches esboços - + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. Se essa opção for marcada, as cores serão recuperadas dos objetos DXF, sempre que possível. Caso contrário as cores padrão serão aplicadas. - + Get original colors from the DXF file Obter cores originais do arquivo DXF - - If this is checked, DXF layers will be imported as Draft layers - Se essa opção for marcada, camadas DXF serão importadas como camadas Traço - - - - Use Draft Layers - Usar camadas Traço - - - + Treat ellipses and splines as polylines Tratar elipses e splines como polilinhas - + Max Spline Segment: Segmento de Spline máximo: - - - SVG / OCA options - Opções SVG / OCA - Export style @@ -1597,21 +1571,146 @@ Values with differences below this value will be treated as same. Show the unit suffix in dimensions Mostrar o sufixo de unidade nas dimensões + + + DXF / DWG + DXF / DWG + + + + Automatic update + Atualizações Automáticas + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + <html><head/><body><p>Se for marcada, você permite ao FreeCAD baixar e atualizar os</p><p>componentes necessário para importar e exportar arquivos DXF. Você também</p><p>pode fazer isso manualmente em https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + + + + Allow FreeCAD to automatically download and update the DXF libraries + Permitir que o FreeCAD baixe e atualize automaticamente as bibliotecas DXF + + + + If this is checked, only standard Part objects will be created (fastest) + Se esta opção for marcada, apenas objetos de tipo Peça serão criados (mais rápido) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + Se essa opção está marcada, camadas DXF serão importadas como objetos GrupoVis + + + + Use VisGroups + Usar GrupoVis + + + + mm + mm + + + + SVG / OCA + SVG / OCA + + + + Grid size + Tamanho da grelha + + + + the number of horizontal or vertical lines of the grid + o número de linhas horizontais ou verticais da grelha + + + + lines + linhas + + + + Dimensions + Dimensões + + + + display mode + Modo de exibição + + + + text above (2D) + texto acima (2D) + + + + text inside (3D) + texto dentro (3D) + + + + extension lines size + tamanho das linhas de extensão + + + + Drawing views + Vistas de desenho + + + + Dashed line definition + Definição de linha tracejada + + + + A SVG linestyle definition + Uma definição de linha no formato SVG + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + Definição de linha traço-ponto + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Definição de linha pontilhada + + + + 0.02,0.02 + 0.02,0.02 + Workbench - + Draft Snap Traço Snap - + Draft creation tools Ferramentas de criação do projeto - + Draft modification tools Ferramentas de modifição do projeto @@ -1619,642 +1718,603 @@ Values with differences below this value will be treated as same. draft - + Draft Command Bar Barra de comando Traço - + active command: comando ativo: - + None Nenhum - + Active Draft command Ação ativa - + X coordinate of next point Coordenada X do ponto seguinte - + X X - + Y Y - + Z Z - + Y coordinate of next point Coordenada Y do ponto seguinte - + Z coordinate of next point Coordenada Z do ponto seguinte - + Radius Raio - + Radius of Circle Raio do círculo - + &Relative &Relativo - + Coordinates relative to last point or absolute (SPACE) Coordenadas relativas ao último ponto, ou absolutas (SPACE) - + F&illed Preench&ido - + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) Marque esta opção para o objeto aparecer cheio, caso contrário irá aparecer como aramado (i) - + &Finish &Concluir - + Finishes the current drawing or editing operation (F) Termina a edição ou desenho atual (F) - + If checked, command will not finish until you press the command button again Se selecionado, o comando não terminará até que você pressione o ícone dele novamente - - &Continue - &Continuar - - - + If checked, an OCC-style offset will be performed instead of the classic offset Selecionado, o offset será feito no modo OCC em vez do modo clássico - + &OCC-style offset Modo &OCC - + Add points to the current object Adicionar pontos ao objeto atual - + Remove points from the current object Remover pontos do objeto atual - + Make Bezier node sharp Fazer nó estrito - + Make Bezier node tangent Fazer nó tangente - + Make Bezier node symmetric Fazer nó simétrico - + &Undo &Desfazer - + Undo the last segment (CTRL+Z) Desfazer o último segmento ("CTRL" + "Z") - + &Close &Fechar - + Finishes and closes the current line (C) Termina e fecha a linha atual (C) - + &Wipe &Limpar - + Wipes the existing segments of this line and starts again from the last point (W) Limpa os segmentos existentes desta linha e começa novamente a partir do último ponto (W) - + Number of sides Número de lados - + Offset Deslocamento - + XY XY - + Select XY plane Selecionar plano XY - + XZ XZ - + Select XZ plane Selecionar plano XZ - + YZ YZ - + Select YZ plane Selecionar plano YZ - + View Vista - + Select plane perpendicular to the current view Selecionar plano perpendicular à vista atual - + Do not project points to a drawing plane Não projetar pontos no plano de desenho - + &Copy &Copiar - + If checked, objects will be copied instead of moved (C) Se selecionada, objetos serão copiados em vez de movidos (C) - + Text string to draw Texto a ser desenhado - + String Texto - + Height of text Altura do texto - + Height Altura - + Intercharacter spacing Espaçamento entre caráteres - + Tracking Rastreamento - + Full path to font file: Caminho completo para o arquivo de fonte: - + Open a FileChooser for font file Abre um diálogo para escolher um arquivo de fonte - + Set/unset a working plane Activa/desactiva um plano de trabalho - + Line Color Cor de linha - + Face Color Cor de face - + Line Width Espessura de linha - + Font Size Tamanho de fonte - + Apply to selected objects Aplicar aos objetos selecionados - + Toggles Construction Mode Ativar / desativar o modo de construção - + Select Plane Selecionar plano - + Line Linha - + DWire DWire - + Circle Círculo - + Center X Centro X - + Arc Arco - + Point Ponto - + Distance Distância - + Trim Aparar - + Pick Object Selecionar objeto - + Edit Editar - + Global X X global - + Global Y Y global - + Global Z Z global - + Local X X local - + Local Y Y local - + Local Z Z local - + Invalid Size value. Using 200.0. Tamanho inválido. Usando 200,0. - + Invalid Tracking value. Using 0. Rastreamento inválido. Usando 0. - + Please enter a text string. Por favor, insira um texto. - + Select a Font file Selecione um arquivo de fonte - + Please enter a font file. Por favor, insira um arquivo de fonte. - + Draft.makeBSpline: not enough points Draft.makeBSpline: não há pontos suficientes - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Pontos de extremidade iguais, fechando. - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Lista de pontos inválida - + Found groups: closing each open object inside Grupos encontrados: fechando cada objeto aberto incluído - + Found mesh(es): turning into Part shapes Malhas encontradas: transformação em em formas - + Found 1 solidificable object: solidifying it Encontrado 1 objeto solidificavel: criando um sólido - + Found 2 objects: fusing them Encontrados dois objetos: fundindo-os - - Found several objects: making a shell - - Vários objetos encontrados: Criação de um casco - - - - - Found several coplanar objects or faces: making one face - - Vários objetos coplanares encontrados: Criação de uma face - - - - + Found 1 non-parametric objects: draftifying it 1 objeto não-paramétrico encontrado: transformando em objeto Draft - - Found 1 closed sketch object: making a face from it - - Encontrado 1 esboço fechado: criando uma face - - - - - Found closed wires: making faces - - Arames fechados encontrados: criação de faces - - - - + Found 1 open wire: closing it Encontrado 1 arame aberto: fechando - + Found several open wires: joining them Vários arames abertos encontrados: Junção - + Found several edges: wiring them Várias arestas encontradas: criando aramado - - Found several non-treatable objects: making compound - - Vários objetos não tratáveis encontrados: criando composto - - - + Unable to upgrade these objects. Não é possível promover esses objetos. - + Found 1 block: exploding it Um bloco encontrado: Explosão - + Found 1 parametric object: breaking its dependencies Encontrado um objeto parametrizado: eliminando suas dependências - + Found 2 objects: subtracting them Encontrado 2 objetos: subtraindo-os - + Found several faces: splitting them Várias faces encontradas: separando em faces isoladas - + Found several objects: subtracting them from the first one Vários objetos encontrados: subtraindo todos eles do primeiro - + Found 1 face: extracting its wires Encontrado 1 face: extraindo seus arames - + Found only wires: extracting their edges Encontrado apenas arames: extraindo suas bordas - + No more downgrade possible Não existem mais retornos possíveis - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: fechado com o mesmo primeiro/último ponto: Geometria não atualizada. - + Pick a face to define the drawing plane Escolha uma face para definir o plano de trabalho - + Pick first point: Escolha o primeiro ponto - + Create Line Criar linha - + Create DWire Criar DWire - + DWire has been closed DWire foi fechado - + Last point has been removed O último ponto foi removido - + Pick next point: Escolha o ponto seguinte: - + Pick next point, or (F)inish or (C)lose: Escolha o próximo ponto, ou Finalizar (F) ou Fechar (C): - + BSpline BSpline @@ -2266,7 +2326,7 @@ Values with differences below this value will be treated as same. - + Create BSpline Criar Spline-B @@ -2276,380 +2336,373 @@ Values with differences below this value will be treated as same. Curva de Bezier - + Bezier curve has been closed A curva de Bezier foi fechada - + Create BezCurve Criar uma curva de Bezier - + Rectangle Retângulo - + Create Plane Criar um plano - + Create Rectangle Criar Retângulo - + Pick opposite point: Escolha o ponto oposto: - + Pick center point: Selecione o centro: - + Pick radius: Indique o raio: - + Pick start angle: Indique o ângulo inicial: - + Pick aperture: Escolhe a abertura: - + Create Circle Criar Círculo - + Create Arc Criar Arco - + Start Angle Ângulo inicial - + Aperture Abertura - + Aperture angle: Ângulo de abertura: - + Polygon Polígono - + Create Polygon Criar Polígono - + Ellipse Elipse - + Create Ellipse Criar uma elipse - + Text Texto - + Pick location point: Escolha o ponto de localização: - + Create Text Criar texto - + Dimension Dimensão - + Create Dimension Criar Dimensão - + Edges don't intersect! Bordas não se cruzam! - + ShapeString ShapeString - + Pick ShapeString location point: Escolha o ponto de localização do ShapeString: - + Create ShapeString Criar um ShapeString - + Move Mover - + Select an object to move Selecione um objeto para mover - + Pick start point: Escolha o ponto de partida - + Copy Copiar - + Pick end point: Escolha um ponto final - + Change Style Alterar estilo - + Select an object to rotate Selecione um objeto para rotacionar - + Pick rotation center: Escolha um centro de rotação - + Rotate Rotacionar - + Pick base angle: Escolha um ângulo de base - + Pick rotation angle: Escolha um ângulo de rotação - + Select an object to offset Selecione um objeto para ser deslocado - + Offset only works on one object at a time A ferramenta de deslocamento só funciona em um objeto de cada vez - + Cannot offset this object type Não é possível gerar offset desse tipo de objeto - + Pick distance: Escolha a distância - + Select an object to upgrade Selecione um objeto para promoção - + Upgrade Promover - + Downgrade Rebaixar - - Select an object to trim/extend - - Selecione um objeto para diminuir/extender - - - - + Scale Escalar - + Select an object to scale Selecione um objeto para escalar - + Pick base point: Escolha um ponto de base - + Pick scale factor: Escolha um fator de escala - + Select an object to project Selecione um objeto a ser projetado - + Select a Draft object to edit Selecione um objeto Traço para editar - + This object type is not editable Este tipo de objeto não é editável - + Active object must have more than two points/nodes O objeto ativo deve ter mais de dois pontos/nós - + Selection is not a Knot A seleção não é um nó - + Endpoint of BezCurve can't be smoothed O ponto de extremidade desta curva não pode ser suavizado - + Select an object to convert Selecione um objeto para converter - + Select an object to array Selecione um objeto para copiar - + Please select base and path objects Por favor selecione um objeto base e um caminho - + Create Point Criar um ponto - + Select an object to clone Selecione um objeto para clonar - + Select face(s) on existing object(s) Selecione faces em objeto(s) existente(s) @@ -2663,41 +2716,212 @@ Values with differences below this value will be treated as same. - - Installed Macros - Macros instaladas - - - + &Draft &Projeto - + Utilities Utilitários - + Wire tools Ferramentas de arame - + Snapping Snap - + Found 1 multi-solids compound: exploding it Foi encontrado 1 composto de vários sólidos: explosão - + Sides Lados + + + BSplines and Bezier curves are not supported by this tool + BSplines e curvas de Bézier não são suportadas por esta ferramenta + + + + The given object is not planar and cannot be converted into a sketch. + Este objeto não é planar e não pode ser convertido em um esboço. + + + + Found several objects: creating a shell + + Vários objetos encontrados: criação de um casco + + + + + Found several coplanar objects or faces: creating one face + + Vários objetos ou faces coplanares encontrados: Criação de uma face + + + + + Found 1 linear object: converting to line + + 1 objeto linear encontrado: Conversão em linha + + + + + Found 1 closed sketch object: creating a face from it + + 1 esboço fechado encontrado: Criação de uma face + + + + + Found closed wires: creating faces + + Arames fechados encontrados: Criação de faces + + + + + Found several non-treatable objects: creating compound + + Vários objetos não tratáveis encontrados: criando composto + + + + + Length + Comprimento + + + + Angle + Ângulo + + + + Length of current segment + Comprimento de segmento atual + + + + Angle of current segment + Ângulo de segmento atual + + + + Check this to lock the current angle (l) + Marcar isto para bloquear o ângulo atual (l) + + + + Con&tinue + Con&tinuar + + + + &Select edge + &Selecionar aresta + + + + Selects an existing edge to be measured by this dimension (E) + Seleciona uma aresta existente a ser medida por esta dimensão (E) + + + + Auto + Auto + + + + Sorry, offset of Bezier curves is currently still not supported + + Desculpa, o deslocamento das curvas de Bézier não é suportado no momento + + + + + Convert to Sketch + Converter para esboço + + + + Convert to Draft + Converter para traço + + + + Convert + Converter + + + + Array + Matriz + + + + Select object(s) to trim/extend + + Selecione objeto(s) para aparar/estender + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + Não é possível aparar estes objetos, somente arames do módulo Traço são suportados + + + + + Unable to trim these objects, too many wires + + Não é possível aparar estes objetos: número de arames muito alto + + + + + These objects don't intersect + + Esses objetos não se cruzam + + + + + Too many intersection points + + Número muito alto de pontos de interseção + + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + As bibliotecas de importação/exportação DXF FreeCAD necessárias para lidar +com o formato DXF não foram encontradas neste sistema. +Por favor, permite ao FreeCAD baixar essas bibliotecas: + 1 - Ative a bancada Traço + 2 - Menu editar > preferências > Import-Export > DXF > permitir downloads +ou baixe essas bibliotecas manualmente, conforme explicado em +https://github.com/yorikvanhavre/Draft-dxf-importer + diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm b/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm index 69725d0f7c..6fde2b3ff0 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm and b/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts index 6e26740cb4..42904b4a35 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts @@ -1,28 +1,42 @@ + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + + Draft_AddPoint - + Add Point Adicionar Ponto - + Adds a point to an existing wire/bspline - Adiciona um ponto a um aramado ou bézier existente + Adiciona um ponto a um fio existente/bspline Draft_AddToGroup - + Add to group... Adicionar ao grupo ... - + Adds the selected object(s) to an existing group Adiciona o (s) objeto (s) selecionado (s) a um grupo existente @@ -30,12 +44,12 @@ Draft_ApplyStyle - + Apply Current Style Aplicar Estilo Atual - + Applies current line width and color to selected objects Aplica a espessura e cor da linha atual aos objetos selecionados @@ -43,12 +57,12 @@ Draft_Arc - + Arc Arco - + Creates an arc. CTRL to snap, SHIFT to constrain Cria um arco. CTRL p/ ajustar, SHIFT p/ restringir @@ -56,25 +70,25 @@ Draft_Array - + Array Matriz - + Creates a polar or rectangular array from a selected object - Cria uma matriz retangular ou polar de um objeto selecionado + Cria uma matriz polar ou retangular de um objeto selecionado Draft_BSpline - + B-Spline B-Spline - + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain Cria uma b-spline com multipontos. CTRL para snap, SHIFT para restringir @@ -84,7 +98,7 @@ BezCurve - BezCurve + CurvaBez @@ -95,12 +109,12 @@ Draft_Circle - + Circle Círculo - + Creates a circle. CTRL to snap, ALT to select tangent objects Cria um círculo. CTRL p/ ajustar, ALT p/ selecionar objetos tangentes @@ -108,12 +122,12 @@ Draft_Clone - + Clone Clonar - + Clones the selected object(s) Clonar os objetos selecionados @@ -121,12 +135,12 @@ Draft_CloseLine - + Close Line Fechar Linha - + Closes the line being drawn Fecha a linha que se está a desenhar @@ -134,12 +148,12 @@ Draft_DelPoint - + Remove Point Remover Ponto - + Removes a point from an existing wire or bspline Remove um ponto de um aramado ou bezier existente @@ -147,12 +161,12 @@ Draft_Dimension - + Dimension Dimensão - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Cria uma dimensão. CTRL p/ ajustar, SHIFT p/ restringir, ALT p/ selecionar um segmento @@ -160,12 +174,12 @@ Draft_Downgrade - + Downgrade Diminuir - + Explodes the selected objects into simpler objects, or subtract faces Desintegra os objetos selecionados em objetos mais simples, ou subtrai faces @@ -173,7 +187,7 @@ Draft_Draft2Sketch - + Draft to Sketch Projeto para Esboço @@ -181,12 +195,12 @@ Draft_Drawing - + Drawing Desenho - + Puts the selected objects on a Drawing sheet. Coloca os objetos selecionados em uma página de desenho. @@ -194,12 +208,12 @@ Draft_Edit - + Edit Editar - + Edits the active object Edita o objeto ativo @@ -207,12 +221,12 @@ Draft_Ellipse - + Ellipse Elipse - + Creates an ellipse. CTRL to snap Criar uma elipse. CTRL para snap @@ -220,12 +234,12 @@ Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) Criar um objeto facebinder a partir de face(s) selecionada(s) @@ -233,12 +247,12 @@ Draft_FinishLine - + Finish line Terminar Linha - + Finishes a line without closing it Termina uma linha sem a fechar @@ -246,12 +260,12 @@ Draft_FlipDimension - + Flip Dimension Inverter cota - + Flip the normal direction of a dimension Inverter a direção normal de uma cota @@ -259,38 +273,25 @@ Draft_Heal - + Heal Corrigir - - Heal faultly Draft objects saved from an earlier FreeCAD version - Corrige objetos defeituosos salvos por uma versão anterior do FreeCAD - - - - Draft_Layer - - - Layer - Camada - - - - Adds a layer - Adicionar uma camada + + Heal faulty Draft objects saved from an earlier FreeCAD version + Corrige objetos (Draft) defeituosos salvos por uma versão anterior do FreeCAD Draft_Line - + Line Linha - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Cria uma linha de 2 pontos. CTRL p/ ajustar, SHIFT p/ restringir @@ -298,12 +299,12 @@ Draft_Move - + Move Mover - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy Move os objetos selecionados entre 2 pontos. CTRL p/ ajustar, SHIFT p/ restringir, ALT p/ copiar @@ -311,12 +312,12 @@ Draft_Offset - + Offset Offset - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy cria contorno paralelo ao objeto selecionado. CTRL para conectar, SHIFT para parametrizar, ALT para copiar @@ -324,12 +325,12 @@ Draft_PathArray - + PathArray Cópia múltipla com caminho - + Creates copies of a selected object along a selected path. Cria cópias de um objeto selecionado ao longo de um caminho. @@ -337,12 +338,12 @@ Draft_Point - + Point Ponto - + Creates a point object Criar um objeto ponto @@ -350,25 +351,25 @@ Draft_Polygon - + Polygon Polígono - + Creates a regular polygon. CTRL to snap, SHIFT to constrain - Cria um polígono regular. CTRL para conectar, SHIFT para parametrizar + Cria um polígono regular. CTRL para conectar (Snap), SHIFT para restringir Draft_Rectangle - + Rectangle Retângulo - + Creates a 2-point rectangle. CTRL to snap Cria um retângulo de 2 pontos. CTRL p/ ajustar @@ -376,12 +377,12 @@ Draft_Rotate - + Rotate Rodar - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Roda os objetos selecionados. CTRL p/ Ajustar, SHIFT p/ restringir, ALT cria uma cópia @@ -389,12 +390,12 @@ Draft_Scale - + Scale Escala - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Redimensione um objeto desde um ponto base. CTRL para conectar, SHIFT para parametrizar, ALT para copiar @@ -402,12 +403,12 @@ Draft_SelectGroup - + Select group Selecione o grupo - + Selects all objects with the same parents as this group Seleciona todos os objetos com as mesmas origens como grupo @@ -415,12 +416,12 @@ Draft_SelectPlane - + SelectPlane Selec. Plano - + Select a working plane for geometry creation Selecione um plano de trabalho para a criação da geometria @@ -428,17 +429,17 @@ Draft_Shape2DView - + Shape 2D view Visualizar Forma a 2D - + Creates Shape 2D views of selected objects Cria visualizações de Forma a 2D dos objetos selecionados - + Convert bidirectionally between Draft and Sketch objects Converter bidirecionalmente entre objetos de Projeto e Esboço @@ -446,25 +447,25 @@ Draft_ShapeString - + Shape from text... Forma a partir de texto... - + Creates text string in shapes. - Creates text string in shapes. + Cria cadeia de texto em formas. Draft_ShowSnapBar - + Show Snap Bar Mostrar barra de Snap - + Shows Draft snap toolbar Mostra a barra de ferramentas de snap do Draft @@ -472,12 +473,12 @@ Draft_Snap_Angle - + Angles Ângulos - + Snaps to 45 and 90 degrees points on arcs and circles Ativa o snap para ângulos de 45 e 90 graus em círculos e arcos @@ -485,12 +486,12 @@ Draft_Snap_Center - + Center Centro - + Snaps to center of circles and arcs Ativa o snap para o centro de círculos e arcos @@ -498,12 +499,12 @@ Draft_Snap_Dimensions - + Dimensions Dimensões - + Shows temporary dimensions when snapping to Arch objects Mostra cotas temporárias quando fizer snap para objetos arquitetónicos @@ -511,12 +512,12 @@ Draft_Snap_Endpoint - + Endpoint Endpoint - + Snaps to endpoints of edges Ativar snap em pontos de extremidade de arestas @@ -524,12 +525,12 @@ Draft_Snap_Extension - + Extension Extensão - + Snaps to extension of edges Snap na extensão das arestas @@ -537,12 +538,12 @@ Draft_Snap_Grid - + Grid - Grid + Grelha - + Snaps to grid points Snaps aos pontos da grelha @@ -550,12 +551,12 @@ Draft_Snap_Intersection - + Intersection Interseção - + Snaps to edges intersections Snap nas interseções de arestas @@ -563,12 +564,12 @@ Draft_Snap_Lock - + Toggle On/Off Ligar/desligar - + Activates/deactivates all snap tools at once Activa/desactiva todas as ferramentas de snap @@ -576,12 +577,12 @@ Draft_Snap_Midpoint - + Midpoint Ponto médio - + Snaps to midpoints of edges Snaps para pontos médios das arestas @@ -589,12 +590,12 @@ Draft_Snap_Near - + Nearest Mais próximo - + Snaps to nearest point on edges Snap ao ponto mais próximo das arestas @@ -602,12 +603,12 @@ Draft_Snap_Ortho - + Ortho Ortogonal - + Snaps to orthogonal and 45 degrees directions Snap em direções ortogonais e a 45 graus @@ -615,12 +616,12 @@ Draft_Snap_Parallel - + Parallel Paralelo - + Snaps to parallel directions of edges Snaps para direções paralelas a arestas @@ -628,12 +629,12 @@ Draft_Snap_Perpendicular - + Perpendicular Perpendicular - + Snaps to perpendicular points on edges Snap para pontos perpendiculares às arestas @@ -641,12 +642,12 @@ Draft_Snap_WorkingPlane - + Working Plane Plano de trabalho - + Restricts the snapped point to the current working plane Restringe o snap ao plano de trabalho atual @@ -654,12 +655,12 @@ Draft_Text - + Text Texto - + Creates an annotation. CTRL to snap Cria uma anotação. CTRL para ajustar @@ -667,12 +668,12 @@ Draft_ToggleConstructionMode - + Toggle construcion Mode Alternar Modo de Construção - + Toggles the Construction Mode for next objects. Alterna o Modo de Construção para os objetos seguintes. @@ -680,12 +681,12 @@ Draft_ToggleContinueMode - + Toggle Continue Mode Alternar modo continuo - + Toggles the Continue Mode for next commands. Alterna o modo de continuar para os comandos seguintes. @@ -693,12 +694,12 @@ Draft_ToggleDisplayMode - + Toggle display mode Alternar Modo de Visualização - + Swaps display mode of selected objects between wireframe and flatlines Muda o modo de visualização dos objetos selecionados entre "wireframe" e as linhas ocultas @@ -706,25 +707,25 @@ Draft_ToggleGrid - + Toggle Grid Alternar Grelha - - Toggles the Draft gid on/off - Alterna entre ligar/desligar a grelha no Draft + + Toggles the Draft grid on/off + Liga ou desliga a grelha do módulo Draft Draft_Trimex - + Trimex aparar_extender - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Apara ou estende o objeto selecionado ou extruda faces. CTRL para conectar, SHIFT restringe ao segmento atual ou perpendicular, ALT inverte a direção @@ -732,12 +733,12 @@ Draft_UndoLine - + Undo last segment Anular Últ. Segm. - + Undoes the last drawn segment of the line being drawn Desfaz o último segmento desenhado da linha que se está a desenhar @@ -745,25 +746,38 @@ Draft_Upgrade - + Upgrade Atualizar - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces Emenda objetos selecionados em um objeto ou converte linhas fechadas em faces preenchidas, ou une faces + + Draft_VisGroup + + + VisGroup + VisGroup + + + + Adds a VisGroup + Adds a VisGroup + + Draft_Wire - + DWire DWire - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain Cria um DraftWire de vários pontos (DWire). CTRL para fazer snap, SHIFT para restringir @@ -771,12 +785,12 @@ Draft_WireToBSpline - + Wire to BSpline Aramado para Bezier - + Converts between Wire and BSpline Converte entre aramado e Bezier-base @@ -804,17 +818,17 @@ a cor predefinida para os símbolos de ajustar - + This is the default color for objects being drawn while in construction mode. Esta é a cor pré-configurada para objetos sendo desenhados no modo de construção - + This is the default group name for construction geometry Este ;e o nome pré-configurado para o grupo para a geometria de construção - + Construction Construção @@ -917,17 +931,17 @@ such as "Arial:Bold" Cor Original e Largura da Linha - + if this is checked, paper space objects will be imported too Se essa opção estiver marcada, objetos em espaço papel serão importados também - + if this is unchecked, texts/mtexts won't be imported Se não marcado, os textos/mtextos não serão importados - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. Ao exportar béziers para DXF, elas são transformadas em polilinhas. Esse valor é o tamanho máximo de cada um dos segmentos de polilinha. Se for 0, a curva bézier inteira será tratada como um segmento reto. @@ -952,7 +966,7 @@ such as "Arial:Bold" Ajustes Gerais - + Construction group name Nome do grupo de construção @@ -968,22 +982,22 @@ Values with differences below this value will be treated as same. Este é o valor usado por funções que usam uma tolerância. Valores com diferenças abaixo deste valor serão tratados como iguais. - + DXF format options Opções do Formato DXF - + Check this if you want the non-named blocks (beginning with a *) to be imported too Marque, se também pretender importar os blocos sem nome (iniciando com a*) - + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... Se marcada, freecad tentará juntar objetos coincidentes em fios. Cuidado, isso pode demorar um pouco... - + Join geometry Juntar a geometria @@ -1083,32 +1097,32 @@ Values with differences below this value will be treated as same. Selecione objetos base após copiar - + If checked, a grid will appear when drawing Se estiver marcada, uma grade aparecerá quando desenhar - + Use grid Usar grade - + Grid spacing Espaçamento da grade - + The spacing between each grid line O espaçamento entre cada linha de grade - + Main lines every linhas principais a cada - + Mainlines will be drawn thicker. Specify here how many squares between mainlines. linhas principais serão desenhados mais grossas. Especifique aqui quantos quadrados entre as linhas principais. @@ -1138,22 +1152,22 @@ Values with differences below this value will be treated as same. Direita - + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable Se essa opção estiver marcada, objetos das mesmas camadas serão agrupados em blocos, tornando a exibição mais rápida, mas dificultando a edição - + Group layers into blocks Agrupar camadas em blocos - + If this is checked, all objects containing faces will be exported as 3d polyfaces Se essa opção estiver marcada, todos os objetos que contêm faces serão exportados como polifaces 3D - + Export 3D objects as polyface meshes Exportar objetos 3D como malhas de poliface @@ -1193,37 +1207,37 @@ Values with differences below this value will be treated as same. Mostrar o tracker do plano de trabalho - + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command Se marcada, a grelha do Draft será sempre visível quando a bancada de trabalho de Draft está ativa. Caso contrário só quando a utilizar um comando - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document Se marcado, os textos importados vão ter o tamanho padrão do texto de Draft, em vez do tamanho que eles têm no documento DXF - + Use standard font size for texts Usar o tamanho de fonte predefinido para textos - + If this is checked, hatches will be converted into simple wires Se selecionado, as tramas serão convertidas em linhas - + Import hatch boundaries as wires Importar limites das tramas como linhas - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width Se selecionado, quando as linhas de segmentos tiverem a largura definida, estas irão ser renderizadas como linhas fechadas com a largura correta - + Render polylines with width Renderizar polilinhas com espessura @@ -1278,79 +1292,79 @@ Values with differences below this value will be treated as same. Snap sempre ativo (desativar tecla de snap) - + Construction geometry Geometria de construção - + Construction geometry color Cor de geometria de construção - + Import Importar - + texts and dimensions textos e cotas - + points pontos - + layouts layouts - + *blocks *blocos - + If this is checked, the exported objects will be projected to reflect the current view direction Se ativo, os objetos exportados serão projetados na direção da vista atual - + Project exported objects along current view direction - Project exported objects along current view direction + Objetos de Projeto exportados juntamente com a direção de exibição atual - + Ellipse export is badly supported. Use this to export them as polylines instead. - Ellipse export is badly supported. Use this to export them as polylines instead. + Exportação de elipse é deficientemente suportada. Use alternativamente para exportá-las como polilinhas. - + DWG format options - DWG format options + Opções de formato DWG - + Path to Teigha File Converter - Path to Teigha File Converter + Caminho para o Conversor de Ficheiros Teigha - + The path to your Teigha File Converter executable - The path to your Teigha File Converter executable + O caminho para o executável do seu Conversor de Ficheiros Teigha Visual settings - Visual settings + Configurações visuais Visual Settings - Visual Settings + Configurações Visuais @@ -1360,227 +1374,187 @@ Values with differences below this value will be treated as same. Default line width - Default line width + Largura predefinida de linha Snap symbols style - Snap symbols style + Estilo dos símbolos de agarrar Draft classic style - Draft classic style + Estilo clássico de desenho Bitsnpieces style - Bitsnpieces style + Estilo Bitsnpieces Color - Color + Cor Hatch patterns resolution - Hatch patterns resolution + Resolução de padrões de trama Grid - Grid + Grelha - + Always show the grid - Always show the grid + Sempre mostrar a grelha Texts and dimensions - Texts and dimensions + Textos e dimensões Texts - Texts + Textos font - font + Tipo Internal font - Internal font + Tipo interno size - size + tamanho - + Dimensions arrows - Dimensions arrows + Flechas de dimensões - + style - style + estilo - + Dot - Dot + Ponto - + Circle Círculo - - - Arrow - Arrow - - - - The default size of arrows - The default size of arrows - - - - Dimensions lines - Dimensions lines - - - - text above - text above - - text inside - text inside + Arrow + Flecha + The default size of arrows + O tamanho predefinido das flechas + + + The default size of dimensions extension lines - The default size of dimensions extension lines + O tamanho predefinido das dimensões das linhas de extensão Dimensions text - Dimensions text + Texto de dimensões orientation - orientation + orientação spacing - spacing + espaçamento The space between the dimension line and the dimension text - The space between the dimension line and the dimension text + O espaço entre a linha de dimensão e o texto da dimensão Default ShapeString Font File - Default ShapeString Font File + Ficheiro padrão de fonte ShapeString Select a font file - Select a font file + Selecione um ficheiro de tipos Fill objects with faces whenever possible - Fill objects with faces whenever possible + Preencher objetos com faces sempre que possível - - DXF / DWG options - DXF / DWG options - - - + Create Criar - - If thi sis checked, only standard Part objects will be created (fastest) - If thi sis checked, only standard Part objects will be created (fastest) - - - + simple Part shapes - simple Part shapes + formas simples de Peça - + If this is checked, parametric Draft objects will be created whenever possible - If this is checked, parametric Draft objects will be created whenever possible + Se marcada, objetos paramétricos do Rascunho serão criados sempre que possível - + Draft objects - Draft objects + Objetos de rascunho - + If this is checked, sketches will be created whenever possible - If this is checked, sketches will be created whenever possible + Se marcado os esboços serão criados sempre que possível - + Sketches - Sketches + Esboços - + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. - If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. + Se marcada, as cores serão recuperadas dos objetos DXF sempre que possível. Caso contrário as cores predefinidas serão aplicadas. - + Get original colors from the DXF file - Get original colors from the DXF file + Obter as cores originais do ficheiro DXF - - If this is checked, DXF layers will be imported as Draft layers - If this is checked, DXF layers will be imported as Draft layers - - - - Use Draft Layers - Use Draft Layers - - - + Treat ellipses and splines as polylines - Treat ellipses and splines as polylines + Tratar elipses e splines como polilinhas - + Max Spline Segment: - Max Spline Segment: - - - - SVG / OCA options - Opções SVG / OCA + Segmento Spline Max: @@ -1597,21 +1571,146 @@ Values with differences below this value will be treated as same. Show the unit suffix in dimensions Mostrar o sufixo das unidade nas dimensões + + + DXF / DWG + DXF / DWG + + + + Automatic update + Atualização automática + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + <html><head/> <body><p>, Marcando isto, permite ao FreeCAD baixar e atualizar o</p> <p>componentes necessários para importação e exportação DXF. Também pode fazer isso</p> <p>manualmente, visitando https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + + + + Allow FreeCAD to automatically download and update the DXF libraries + Permitir que o FreeCAD baixe e atualize automaticamente as bibliotecas DXF + + + + If this is checked, only standard Part objects will be created (fastest) + Se marcada, apenas objetos Peça padrão (Part) serão criados (mais rápido) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + Se esta opção for marcada, camadas DXF serão importadas como projecto VisGroups + + + + Use VisGroups + Usar VisGroups + + + + mm + mm + + + + SVG / OCA + SVG / OCA + + + + Grid size + Tamanho da grelha + + + + the number of horizontal or vertical lines of the grid + Número de linhas horizontais ou verticais da grade + + + + lines + linhas + + + + Dimensions + Dimensões + + + + display mode + Modo de visualização + + + + text above (2D) + texto acima (2D) + + + + text inside (3D) + texto dentro (3D) + + + + extension lines size + tamanho das linhas de extensão + + + + Drawing views + Vistas de desenho + + + + Dashed line definition + Definição de linha tracejada + + + + A SVG linestyle definition + A SVG linestyle definition + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + Definição de linha DashDot + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Definição de linha pontilhada (Dotted) + + + + 0.02,0.02 + 0.02,0.02 + Workbench - + Draft Snap Draft Snap - + Draft creation tools Ferramentas de criação Draft - + Draft modification tools Ferramentas de modifição Draft @@ -1619,635 +1718,598 @@ Values with differences below this value will be treated as same. draft - + Draft Command Bar Barra de comando Draft - + active command: Comando ativo: - + None Nenhum - + Active Draft command comando Desenhar ativado - + X coordinate of next point Coordenada X do Próximo Ponto - + X X - + Y Y - + Z Z - + Y coordinate of next point Coordenada Y do Próximo Ponto - + Z coordinate of next point Coordenada Z do Próximo Ponto - + Radius Raio - + Radius of Circle Raio do Círculo - + &Relative &Parente - + Coordinates relative to last point or absolute (SPACE) Coordenadas relativas ao último ponto ou absoluta (ESPAÇO) - + F&illed Preench&ido - + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) Verifique se o objeto deve aparecer como preenchido, caso contrário ele será exibido como aramado (i) - + &Finish &Finalizar - + Finishes the current drawing or editing operation (F) Termina o desenho atual ou operação de edição (F) - + If checked, command will not finish until you press the command button again Se marcado, o comando não irá terminar até que clique novamente no botão de comando - - &Continue - &Continuar - - - + If checked, an OCC-style offset will be performed instead of the classic offset Se marcada, um deslocamento de estilo OCC será executado em vez do deslocamento clássico - + &OCC-style offset &Deslocamento estilo OCC - + Add points to the current object Adicionar pontos ao objeto atual - + Remove points from the current object Remover pontos do objeto atual - + Make Bezier node sharp - Make Bezier node sharp + Tornar nó Bezier afiado - + Make Bezier node tangent - Make Bezier node tangent + Tornar nó Bezier tangente - + Make Bezier node symmetric - Make Bezier node symmetric + Tornar nó Bezier simétrico - + &Undo &Anular - + Undo the last segment (CTRL+Z) Anular o Último Segmento (CTRL+Z) - + &Close &Fechar - + Finishes and closes the current line (C) Termina e fecha a linha atual (C) - + &Wipe &Limpe - + Wipes the existing segments of this line and starts again from the last point (W) Limpa os segmentos existentes desta linha e começa novamente a partir do último ponto (W) - + Number of sides Nr. de Lados - + Offset Offset - + XY XY - + Select XY plane Selecionar o Plano XY - + XZ XZ - + Select XZ plane Selecionar o Plano XZ - + YZ YZ - + Select YZ plane Selecionar o Plano YZ - + View Visualização - + Select plane perpendicular to the current view Selecionar o Plano Perpendicular à Visualização Atual - + Do not project points to a drawing plane Não projectar pontos para um plano de desenho - + &Copy &Copiar - + If checked, objects will be copied instead of moved (C) Se marcado, os objetos serão copiados e não movidos (C) - + Text string to draw - Text string to draw + Cadeia de caracteres de texto a desenhar - + String - String + Texto - + Height of text Altura do texto - + Height Altura - + Intercharacter spacing Espaçamento entre caráteres - + Tracking Monitorização - + Full path to font file: Caminho completo para o arquivo de fonte: - + Open a FileChooser for font file Abrir um diálogo para escolher um arquivo de fonte - + Set/unset a working plane Activa/desactiva um plano de trabalho - + Line Color Cor da Linha - + Face Color Cor da Superfície - + Line Width Largura da Linha - + Font Size Tamanho da Fonte - + Apply to selected objects Aplicar aos Objet. Selec. - + Toggles Construction Mode Alterna Modo Construção - + Select Plane Selec. Plano - + Line Linha - + DWire DWire - + Circle Círculo - + Center X Centrar X - + Arc Arco - + Point Ponto - + Distance Distância - + Trim Aparar - + Pick Object Escolha objeto - + Edit Editar - + Global X X global - + Global Y Y global - + Global Z Z global - + Local X X local - + Local Y Y local - + Local Z Z local - + Invalid Size value. Using 200.0. - Tamanho inválido. Usando 200,0. + Valor de Tamanho inválido. Usando 200,0. - + Invalid Tracking value. Using 0. - Invalid Tracking value. Using 0. + Rastreamento inválido. Usando 0. - + Please enter a text string. Por favor, insira um texto. - + Select a Font file - Selecione um arquivo de fonte + Selecione um ficheiro de tipos - + Please enter a font file. Por favor, insira um arquivo de fonte. - + Draft.makeBSpline: not enough points Draft.makeBSpline: não há pontos suficientes - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Pontos de extremidade iguais, fechando - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Lista de pontos inválida - + Found groups: closing each open object inside Encontrados grupos: fechando cada objecto aberto no interior - + Found mesh(es): turning into Part shapes - Found mesh(es): turning into Part shapes + Encontrada(s) malha(s): transformando em formas de Peça - + Found 1 solidificable object: solidifying it Encontrado 1 objeto solidificável: solidificando-o - + Found 2 objects: fusing them Encontrados 2 objectos: fusão - - Found several objects: making a shell - - Found several objects: making a shell - - - - - Found several coplanar objects or faces: making one face - - Found several coplanar objects or faces: making one face - - - - + Found 1 non-parametric objects: draftifying it Encontrado um objecto não-paramétrico: crando desenho - - Found 1 closed sketch object: making a face from it - - Encontrado um objecto de desenho fechado: criando uma face - - - - Found closed wires: making faces - - Encontradas linhas fechadas: criando faces - - - + Found 1 open wire: closing it Encontrada 1 rede aberta: fechando - + Found several open wires: joining them Várias linhas abertos encontradas: unindo - + Found several edges: wiring them Várias arestas encontradas: criando rede - - Found several non-treatable objects: making compound - - Encontrados vários objetos não tratáveis: agrupando - - - + Unable to upgrade these objects. Não é possível atualizar estes objetos. - + Found 1 block: exploding it Um bloco encontrado: Explodindo - + Found 1 parametric object: breaking its dependencies Encontrado 1 objeto paramétrizado: quebrando suas dependências - + Found 2 objects: subtracting them Encontrados 2 objetos: subtraindo-os - + Found several faces: splitting them Encontradas várias faces: dividindo-as - + Found several objects: subtracting them from the first one Encontrados vários objetos: subtraindo-os do primeiro - + Found 1 face: extracting its wires Encontrada 1 face: extraindo suas linhas - + Found only wires: extracting their edges Encontrado apenas linhas: extraindo suas arestas - + No more downgrade possible Não existem mais despromoções possíveis - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. + _BSpline.createGeometry: fechado com o mesmo primeiro/último Ponto. Geometria não atualizada. - + Pick a face to define the drawing plane Escolha uma superfície para definir o plano de desenho - + Pick first point: Sel. primeiro ponto: - + Create Line Criar linha - + Create DWire - Create DWire + Criar DWire - + DWire has been closed - DWire has been closed + O DWire foi fechado - + Last point has been removed O último ponto foi removido - + Pick next point: Sel. ponto seguinte: - + Pick next point, or (F)inish or (C)lose: Selec. ponto seguinte, (T)erminar ou (F)echar: - + BSpline BSpline @@ -2258,421 +2320,581 @@ Values with differences below this value will be treated as same. Spline foi fechada - + Create BSpline Criar BSpline BezCurve - BezCurve + CurvaBez - + Bezier curve has been closed - Bezier curve has been closed + Curva de Bezier foi fechada - + Create BezCurve - Create BezCurve + Criar CurvaBez - + Rectangle Retângulo - + Create Plane Criar plano - + Create Rectangle Criar retângulo - + Pick opposite point: Selec. ponto oposto: - + Pick center point: capturar ponto central: - + Pick radius: Selec. Raio: - + Pick start angle: Escolha o ângulo de início: - + Pick aperture: Selecione a abertura - + Create Circle Criar círculo - + Create Arc Criar Arco - + Start Angle Ângulo de início - + Aperture Abertura - + Aperture angle: Ângulo da abertura: - + Polygon Polígono - + Create Polygon Criar polígono - + Ellipse Elipse - + Create Ellipse Criar elipse - + Text Texto - + Pick location point: Escolha a localização do ponto: - + Create Text Criar texto - + Dimension Dimensão - + Create Dimension Criar cota - + Edges don't intersect! Arestas não se intersectam - + ShapeString - ShapeString + FormaString - + Pick ShapeString location point: - Pick ShapeString location point: + Escolher ponto de localização FormaString: - + Create ShapeString - Create ShapeString + Criar FormaString - + Move Mover - + Select an object to move Selecionar um Objeto para Mover - + Pick start point: Escolha um ponto de início: - + Copy Copiar - + Pick end point: Escolha o ponto do fim: - + Change Style Alterar Estilo - + Select an object to rotate Selecionar um Objeto p/ Rodar - + Pick rotation center: Captura centro de rotação - + Rotate Rodar - + Pick base angle: Escolher o ângulo da base: - + Pick rotation angle: Escolher ângulo da rotação: - + Select an object to offset Selecionar objeto para contorno paralelo - + Offset only works on one object at a time contorno paralelo só funciona em um objeto por vez - + Cannot offset this object type Não consegue criar rebordo deste tipo de objecto - + Pick distance: Escolher distância: - + Select an object to upgrade Selecione um objeto para promover - + Upgrade Atualizar - + Downgrade Diminuir - - Select an object to trim/extend - - selecione objeto para aparar / extender - - - + Scale Escala - + Select an object to scale Selecionar um Objeto para Escalar - + Pick base point: Escolher o ponto da base: - + Pick scale factor: Escolher o fator da escala: - + Select an object to project - Select an object to project + Selecione objeto a projetar - + Select a Draft object to edit - Select a Draft object to edit + Selecione um objeto de Rascunho para editar - + This object type is not editable Este tipo de objeto não é editável - + Active object must have more than two points/nodes Objeto ativo deve ter mais de dois pontos / nós - + Selection is not a Knot - Selection is not a Knot + A seleção não é um nó - + Endpoint of BezCurve can't be smoothed - Endpoint of BezCurve can't be smoothed + Ponto de extremo final de BezCurve não pode ser suavizado - + Select an object to convert - Select an object to convert + Selecione um objeto para converter - + Select an object to array - Select an object to array + Selecione um objeto a matrizar - + Please select base and path objects - Please select base and path objects + Por favor selecione objetos base e caminho - + Create Point - Create Point + Criar Ponto - + Select an object to clone - Select an object to clone + Selecione objeto a clonar - + Select face(s) on existing object(s) - Select face(s) on existing object(s) + Selecione face(s) em objeto(s) existente(s) Teigha File Converter not found, DWG support is disabled. - Teigha File Converter not found, DWG support is disabled. + Conversor de ficheiros Teigha não encontrado. Suporte DWG desativado. - - Installed Macros - Macros instaladas - - - + &Draft - &Draft + &Desenho - + Utilities Utilitários - + Wire tools Ferramentas de Linha - + Snapping Alinhamento e atração - + Found 1 multi-solids compound: exploding it - Found 1 multi-solids compound: exploding it + Encontrado 1 composto multi-sólidos: explodindo-o - + Sides - Sides + Lados + + + + BSplines and Bezier curves are not supported by this tool + BSplines e curvas Bézier não são suportadas por esta ferramenta + + + + The given object is not planar and cannot be converted into a sketch. + O objeto não é planar e não pode ser convertido em esboço (sketch). + + + + Found several objects: creating a shell + + Vários objetos encontrados: criação de um casca (shell) + + + + + Found several coplanar objects or faces: creating one face + + Vários objetos ou faces complanares encontrados: Será criada uma face + + + + + Found 1 linear object: converting to line + + 1 objeto linear encontrado: será criada uma linha + + + + + Found 1 closed sketch object: creating a face from it + + 1 esboço fechado (sketch) encontrado: será criada uma face + + + + Found closed wires: creating faces + + Linhas fechadas (wires) encontradas: serão criadas faces + + + + + Found several non-treatable objects: creating compound + + Vários objetos não tratáveis encontrados: criando composto (compound) + + + + + Length + Comprimento + + + + Angle + Ângulo + + + + Length of current segment + Comprimento do segmento atual + + + + Angle of current segment + Ângulo do segmento atual + + + + Check this to lock the current angle (l) + Marcar isto para bloquear o ângulo atual (l) + + + + Con&tinue + Con&tinuar + + + + &Select edge + &Selecionar aresta + + + + Selects an existing edge to be measured by this dimension (E) + Seleciona uma aresta existente a ser medida por esta dimensão (E) + + + + Auto + Auto + + + + Sorry, offset of Bezier curves is currently still not supported + + Desculpe, o deslocamento (offset) de curvas Bézier não é suportado no momento + + + + Convert to Sketch + Converter para esboço (Sketch) + + + + Convert to Draft + Converter para traço (Draft) + + + + Convert + Converter + + + + Array + Matriz + + + + Select object(s) to trim/extend + + Selecione objetos para aparar/estender (trim/extend) + + + + Unable to trim these objects, only Draft wires and arcs are supported + + Incapaz de cortar estes objetos, somente os traços e arcos (Draft wires) são suportados + + + + Unable to trim these objects, too many wires + + Incapaz de cortar estes objetos, muitos traços (wires) + + + + These objects don't intersect + + These objects don't intersect + + + + + Too many intersection points + + Too many intersection points + + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.qm b/src/Mod/Draft/Resources/translations/Draft_ro.qm index 6237888244..b0cccdbe9c 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ro.qm and b/src/Mod/Draft/Resources/translations/Draft_ro.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.ts b/src/Mod/Draft/Resources/translations/Draft_ro.ts index b4daf53216..b6e715152d 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ro.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ro.ts @@ -1,15 +1,29 @@ + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + + Draft_AddPoint - + Add Point Adaugă punct - + Adds a point to an existing wire/bspline Adauga un punct la o polilinie/curba @@ -17,12 +31,12 @@ Draft_AddToGroup - + Add to group... Adăugare la grup... - + Adds the selected object(s) to an existing group Adauga obiectele selectate la un grup existent @@ -30,12 +44,12 @@ Draft_ApplyStyle - + Apply Current Style Aplică stilul curent - + Applies current line width and color to selected objects Aplică lăţimea și culoarea liniei curente pentru obiectele selectate @@ -43,12 +57,12 @@ Draft_Arc - + Arc Arc - + Creates an arc. CTRL to snap, SHIFT to constrain Creează un arc de cerc. CTRL pentru ajustare, SHIFT pentru constrângere @@ -56,12 +70,12 @@ Draft_Array - + Array Matrice - + Creates a polar or rectangular array from a selected object Creaza o multime polara sau rectangulara din obiectele selectate @@ -69,12 +83,12 @@ Draft_BSpline - + B-Spline B-Spline - + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain Creează o curba spline multi-punct. CTRL pentru a fixa, SHIFT pentru a restricţiona @@ -84,7 +98,7 @@ BezCurve - BezCurve + Curbă bezier @@ -95,12 +109,12 @@ Draft_Circle - + Circle Cerc - + Creates a circle. CTRL to snap, ALT to select tangent objects Creează un cerc. CTRL pentru ajustare, ALT pentru selectare obiecte tangente @@ -108,12 +122,12 @@ Draft_Clone - + Clone Clonă - + Clones the selected object(s) Clonează obiectul(ele) selectate @@ -121,12 +135,12 @@ Draft_CloseLine - + Close Line Închide linia - + Closes the line being drawn Închide linia în curs de elaborare @@ -134,12 +148,12 @@ Draft_DelPoint - + Remove Point Eliminare punct - + Removes a point from an existing wire or bspline Elimina un punct dintr-o polilinie/curba @@ -147,12 +161,12 @@ Draft_Dimension - + Dimension Dimensiune - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Creează o dimensiune. CTRL pentru ajustare, SHIFT pentru constrângere, ALT pentru selectare segment @@ -160,12 +174,12 @@ Draft_Downgrade - + Downgrade Downgrade - + Explodes the selected objects into simpler objects, or subtract faces Explodează obiectele selectate în obiecte simple, sau extrage fețele @@ -173,7 +187,7 @@ Draft_Draft2Sketch - + Draft to Sketch Ciorna in schita @@ -181,12 +195,12 @@ Draft_Drawing - + Drawing Desen - + Puts the selected objects on a Drawing sheet. Pune obiectele selectate într-o foaie de desen. @@ -194,12 +208,12 @@ Draft_Edit - + Edit Editare - + Edits the active object Editează obiectul activ @@ -207,12 +221,12 @@ Draft_Ellipse - + Ellipse Elipsa - + Creates an ellipse. CTRL to snap Crează o elipsă. CTRL pentru a ancora @@ -220,12 +234,12 @@ Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) Creates a facebinder object from selected face(s) @@ -233,12 +247,12 @@ Draft_FinishLine - + Finish line Linia de sosire - + Finishes a line without closing it Termină o linie fără a o închide @@ -246,51 +260,38 @@ Draft_FlipDimension - + Flip Dimension - Flip Dimension + Întoarce dimensiunea - + Flip the normal direction of a dimension - Flip the normal direction of a dimension + Întoarce direcția normală a unei dimensiuni Draft_Heal - + Heal - Heal + Repară - - Heal faultly Draft objects saved from an earlier FreeCAD version - Heal faultly Draft objects saved from an earlier FreeCAD version - - - - Draft_Layer - - - Layer - Layer - - - - Adds a layer - Adds a layer + + Heal faulty Draft objects saved from an earlier FreeCAD version + Heal faulty Draft objects saved from an earlier FreeCAD version Draft_Line - + Line Linie - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Creează o linie din 2 puncte. CTRL pentru ajustare, SHIFT pentru constrângere @@ -298,12 +299,12 @@ Draft_Move - + Move Mută - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy Mută ​​obiectele selectate între 2 puncte. CTRL pentru ajustare, SHIFT pentru constrângere, ALT pentru copiere @@ -311,12 +312,12 @@ Draft_Offset - + Offset Compensare - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Compensează obiectul activ. CTRL la ajustare, SHIFT pentru constrângere, ALT pentru a copia @@ -324,12 +325,12 @@ Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. Creates copies of a selected object along a selected path. @@ -337,12 +338,12 @@ Draft_Point - + Point Punct - + Creates a point object Creează un obiect punct @@ -350,12 +351,12 @@ Draft_Polygon - + Polygon Poligon - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Creează un poligon regulat. CTRL pentru a fixa, SHIFT pentru a limita @@ -363,12 +364,12 @@ Draft_Rectangle - + Rectangle Dreptunghi - + Creates a 2-point rectangle. CTRL to snap Creează un dreptunghi din 2 puncte. CTRL pentru a fixa @@ -376,12 +377,12 @@ Draft_Rotate - + Rotate Rotire - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Roteşte obiectele selectate. CTRL pentru ajustare, SHIFT pentru constrângere, ALT crează copie @@ -389,12 +390,12 @@ Draft_Scale - + Scale Scalare - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Scalează obiectele selectate de la un punct de bază. CTRL pentru ajustare, SHIFT pentru constrângere, ALT pentru a copia @@ -402,12 +403,12 @@ Draft_SelectGroup - + Select group Selectați un grup - + Selects all objects with the same parents as this group Selectează toate obiectele cu aceeaşi părinţii ca acest grup @@ -415,12 +416,12 @@ Draft_SelectPlane - + SelectPlane Selecție plan - + Select a working plane for geometry creation Selectare plan de lucru pentru creare obiect geometric @@ -428,17 +429,17 @@ Draft_Shape2DView - + Shape 2D view Vizualizare forma 2D - + Creates Shape 2D views of selected objects Creaza vizualizari forma 2D pentru obiectele selectate - + Convert bidirectionally between Draft and Sketch objects Conversie bidirectionala a obiectelor intre ciorna si schita @@ -446,25 +447,25 @@ Draft_ShapeString - + Shape from text... - Shape from text... + Forma din text... - + Creates text string in shapes. - Creates text string in shapes. + Creează şir text în forme. Draft_ShowSnapBar - + Show Snap Bar Arata bara de ancore - + Shows Draft snap toolbar Arata bara de ancore pentru ciorna @@ -472,51 +473,51 @@ Draft_Snap_Angle - + Angles - Angles + Unghiuri - + Snaps to 45 and 90 degrees points on arcs and circles - Snaps to 45 and 90 degrees points on arcs and circles + Aliniază la punctele de 45 și 90 de grade pe un arc de cerd Draft_Snap_Center - + Center - Center + Centru - + Snaps to center of circles and arcs - Snaps to center of circles and arcs + Aliniază la centrul cercului și la arce Draft_Snap_Dimensions - + Dimensions Dimensiuni - + Shows temporary dimensions when snapping to Arch objects - Shows temporary dimensions when snapping to Arch objects + Arată dimensiunile temporare când se aliniază la obiecte arc Draft_Snap_Endpoint - + Endpoint - Endpoint + Punct final - + Snaps to endpoints of edges Snaps to endpoints of edges @@ -524,12 +525,12 @@ Draft_Snap_Extension - + Extension - Extension + Extensie - + Snaps to extension of edges Snaps to extension of edges @@ -537,25 +538,25 @@ Draft_Snap_Grid - + Grid - Grid + Grilă - + Snaps to grid points - Snaps to grid points + Aliniază la punctele grilei Draft_Snap_Intersection - + Intersection Intersecţie - + Snaps to edges intersections Snaps to edges intersections @@ -563,12 +564,12 @@ Draft_Snap_Lock - + Toggle On/Off - Toggle On/Off + Comută Pornit/Oprit - + Activates/deactivates all snap tools at once Activates/deactivates all snap tools at once @@ -576,12 +577,12 @@ Draft_Snap_Midpoint - + Midpoint - Midpoint + Punct mijlociu - + Snaps to midpoints of edges Snaps to midpoints of edges @@ -589,12 +590,12 @@ Draft_Snap_Near - + Nearest - Nearest + Cel mai apropiat - + Snaps to nearest point on edges Snaps to nearest point on edges @@ -602,12 +603,12 @@ Draft_Snap_Ortho - + Ortho Ortho - + Snaps to orthogonal and 45 degrees directions Snaps to orthogonal and 45 degrees directions @@ -615,12 +616,12 @@ Draft_Snap_Parallel - + Parallel - Parallel + Paralel - + Snaps to parallel directions of edges Snaps to parallel directions of edges @@ -628,12 +629,12 @@ Draft_Snap_Perpendicular - + Perpendicular Perpendicular - + Snaps to perpendicular points on edges Snaps to perpendicular points on edges @@ -641,12 +642,12 @@ Draft_Snap_WorkingPlane - + Working Plane - Working Plane + Plan de lucru - + Restricts the snapped point to the current working plane Restricts the snapped point to the current working plane @@ -654,12 +655,12 @@ Draft_Text - + Text Text - + Creates an annotation. CTRL to snap Creează o notă. CTRL pentru a fixa @@ -667,12 +668,12 @@ Draft_ToggleConstructionMode - + Toggle construcion Mode Comutare modul de construcție - + Toggles the Construction Mode for next objects. Comută Modul de Construcţie pentru obiectele următoare. @@ -680,12 +681,12 @@ Draft_ToggleContinueMode - + Toggle Continue Mode - Toggle Continue Mode + Comută modul continuu - + Toggles the Continue Mode for next commands. Comuta modul continuu pentru urmatoarea comanda. @@ -693,12 +694,12 @@ Draft_ToggleDisplayMode - + Toggle display mode Comutare mod de afişare - + Swaps display mode of selected objects between wireframe and flatlines Schimbă modul de afişare a obiectelor selectate între wireframe şi linii bidimensionale @@ -706,25 +707,25 @@ Draft_ToggleGrid - + Toggle Grid Comuta grila - - Toggles the Draft gid on/off - Inchide sau deschide grila pentru modul ciorna + + Toggles the Draft grid on/off + Toggles the Draft grid on/off Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Taie sau extinde obiectele selectate sau extrudeaza o fateta. CTRL activeaza ancorele, SHIFT adauga segmentul sau normala, ALT inverseaza @@ -732,12 +733,12 @@ Draft_UndoLine - + Undo last segment Anulare ultimul segment - + Undoes the last drawn segment of the line being drawn Anulează ultimul segment al liniei în curs de elaborare @@ -745,25 +746,38 @@ Draft_Upgrade - + Upgrade Upgrade - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces Alătură obiectele selectate într-unul singur, sau converteşte firele închise în fețe pline, sau unește fețele + + Draft_VisGroup + + + VisGroup + VisGroup + + + + Adds a VisGroup + Adds a VisGroup + + Draft_Wire - + DWire DWire - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain Creaza o polililinie (DWire). CTRL activeaza ancorele, SHIFT constrange @@ -771,12 +785,12 @@ Draft_WireToBSpline - + Wire to BSpline Polilinie in curba - + Converts between Wire and BSpline Converteste un obiect din polilinie in curba @@ -804,17 +818,17 @@ culoarea implicită pentru simbolurile fixate - + This is the default color for objects being drawn while in construction mode. Aceasta este culoarea implicită pentru obiecte în curs de elaborare în Modul de Construcţie. - + This is the default group name for construction geometry Acesta este numele implicit al grupurilor pentru geometria de construcţie - + Construction Construcţie @@ -919,17 +933,17 @@ sau "mono", sau o familie cum ar fi "Arial,Helvetica,sans", sau un nume şi un s Culoarea şi grosime de linie originală - + if this is checked, paper space objects will be imported too dacă această căsuţă este bifată, vor fi importate şi obiecte spaţiale de hârtie - + if this is unchecked, texts/mtexts won't be imported Dacă această casuţă este debifată, textele/mtexts nu vor fi importate - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. Cand curbele sunt exportate in DXF sunt transformate in polilinii. Valoarea reprezinta lungimea maxima a fiecarui segment. Daca este 0, intreaga curga este tratata ca fiind un singur segment de dreapta. @@ -954,7 +968,7 @@ sau "mono", sau o familie cum ar fi "Arial,Helvetica,sans", sau un nume şi un s Setări generale - + Construction group name Nume de grup constructii @@ -970,22 +984,22 @@ Values with differences below this value will be treated as same. Aceasta este valoarea utilizată de funcţii care utilizează o toleranţă. Valorile cu diferenţe mai jos această valoare vor fi tratate ca fiind la fel. - + DXF format options Opţiuni de formatare DXF - + Check this if you want the non-named blocks (beginning with a *) to be imported too Bifaţi dacă doriţi să importaţi şi blocurile fără nume (începând cu o *) - + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... Daca e bifat, FreeCAD va incerca sa uneasca obiectele incidente intr-o polilinie. Atentie, operatiunea poate dura destul de mult... - + Join geometry Reuneşte formele geometrice @@ -1085,32 +1099,32 @@ Values with differences below this value will be treated as same. Selectează obiectele de bază după copiere - + If checked, a grid will appear when drawing Dacă bifaţi căsuţa, o grilă va apărea atunci când desenaţi - + Use grid Utilizează grila - + Grid spacing Spaţierea grilei - + The spacing between each grid line Spaţierea dintre liniile grilei - + Main lines every Linii principale la fiecare - + Mainlines will be drawn thicker. Specify here how many squares between mainlines. Liniile principale vor fi trasate îngroşat. Specificaţi aici cate pătrăţele sunt între liniile principale. @@ -1140,22 +1154,22 @@ Values with differences below this value will be treated as same. Dreapta - + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable dacă bifaţi căsuţa obiectele de pe acelaşi strat vor fi unite în Blocuri de Schiţe, făcând afişarea lor mai rapidă dar editarea lor ulterioară devine mai complicată - + Group layers into blocks Grupează straturile în blocuri - + If this is checked, all objects containing faces will be exported as 3d polyfaces aca e bifat, toate obiectele continan fete vor fi exportate ca 3d polyfaces - + Export 3D objects as polyface meshes Exporta obiectele 3D ca "polyface meshes" @@ -1195,37 +1209,37 @@ Values with differences below this value will be treated as same. Afisati indicatorul planului de lucru - + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command Daca este bifat, grila pentru Ciorna va fi vizibila continuu cat timp modulul Ciorna este activ. Altfel va fi vizibila doar cand o comanda este activa - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document Daca e bifat, textele importate vor primi inaltimea de tex standard pentru Ciorna in locul inaltimilor proprii din documentul DXF - + Use standard font size for texts Utilizaţi dimensiunea standard a fontului pentru texte - + If this is checked, hatches will be converted into simple wires Daca e bifat, hasurile vor fi convertite in linii simple - + Import hatch boundaries as wires Importa marginile hasurii ca si linii - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width Daca este bifat, cand poliliniile au latime definita vor fi afisate cu latimea corecta - + Render polylines with width Afiseaza grosimea poliliniei @@ -1267,7 +1281,7 @@ Values with differences below this value will be treated as same. Snapping - Snapping + Ancorare @@ -1277,82 +1291,82 @@ Values with differences below this value will be treated as same. Always snap (disable snap mod) - Always snap (disable snap mod) + Aliniază întotdeauna (dezactivare mod aliniere) - + Construction geometry Geometria constructiei - + Construction geometry color Construction geometry color - + Import Import - - - texts and dimensions - texts and dimensions - - - - points - points - + texts and dimensions + texte și dimensiuni + + + + points + puncte + + + layouts - layouts + aspecte - + *blocks - *blocks + *blocuri - + If this is checked, the exported objects will be projected to reflect the current view direction If this is checked, the exported objects will be projected to reflect the current view direction - + Project exported objects along current view direction Project exported objects along current view direction - + Ellipse export is badly supported. Use this to export them as polylines instead. Ellipse export is badly supported. Use this to export them as polylines instead. - + DWG format options - DWG format options + Opțiuni format DWG - + Path to Teigha File Converter Path to Teigha File Converter - + The path to your Teigha File Converter executable The path to your Teigha File Converter executable Visual settings - Visual settings + Configurări vizuale Visual Settings - Visual Settings + Configurări vizuale @@ -1362,7 +1376,7 @@ Values with differences below this value will be treated as same. Default line width - Default line width + Lățime implicită linie @@ -1372,7 +1386,7 @@ Values with differences below this value will be treated as same. Draft classic style - Draft classic style + Stil clasic ciornă @@ -1382,7 +1396,7 @@ Values with differences below this value will be treated as same. Color - Color + Culoare @@ -1392,22 +1406,22 @@ Values with differences below this value will be treated as same. Grid - Grid + Grilă - + Always show the grid - Always show the grid + Arată grila mereu Texts and dimensions - Texts and dimensions + Texte și dimensiuni Texts - Texts + Texte @@ -1417,82 +1431,67 @@ Values with differences below this value will be treated as same. Internal font - Internal font + Font intern size - size + dimensiune - + Dimensions arrows - Dimensions arrows + Dimensiuni săgeți - + style - style + stil - + Dot - Dot + Punct - + Circle Cerc - - - Arrow - Arrow - - - - The default size of arrows - The default size of arrows - - - - Dimensions lines - Dimensions lines - - - - text above - text above - - text inside - text inside + Arrow + Săgeată + The default size of arrows + Dimensiunea implicită a săgeților + + + The default size of dimensions extension lines - The default size of dimensions extension lines + Dimensiunea implicită a dimensiunilor liniilor de extensie Dimensions text - Dimensions text + Dimensiuni text orientation - orientation + orientare spacing - spacing + distanțare The space between the dimension line and the dimension text - The space between the dimension line and the dimension text + Spațiul dintre linia de dimensionare și textul dimensiunii @@ -1502,7 +1501,7 @@ Values with differences below this value will be treated as same. Select a font file - Select a font file + Selectați un fișier font @@ -1510,110 +1509,211 @@ Values with differences below this value will be treated as same. Fill objects with faces whenever possible - - DXF / DWG options - DXF / DWG options - - - + Create Creează - - If thi sis checked, only standard Part objects will be created (fastest) - If thi sis checked, only standard Part objects will be created (fastest) - - - + simple Part shapes simple Part shapes - + If this is checked, parametric Draft objects will be created whenever possible If this is checked, parametric Draft objects will be created whenever possible - + Draft objects - Draft objects + Obiect ciornă - + If this is checked, sketches will be created whenever possible - If this is checked, sketches will be created whenever possible + Dacă selectați aceasta, schițele vor fi create de cîte ori este posibil - + Sketches - Sketches + Schițe - + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. - If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. + Dacă selectați aceasta, culorile vor fi extrase din obiectele DXF ori de câte ori este posibil. +Altfel vor fi aplicate culorile implicite. - + Get original colors from the DXF file - Get original colors from the DXF file + Ia culorile originale din fișierul DXF - - If this is checked, DXF layers will be imported as Draft layers - If this is checked, DXF layers will be imported as Draft layers - - - - Use Draft Layers - Use Draft Layers - - - + Treat ellipses and splines as polylines Treat ellipses and splines as polylines - + Max Spline Segment: Max Spline Segment: - - - SVG / OCA options - SVG / OCA options - Export style - Export style + Export stil Snapping settings - Snapping settings + Configurări aliniere Show the unit suffix in dimensions - Show the unit suffix in dimensions + Arată sufixul unităților în dimensiuni + + + + DXF / DWG + DXF / DWG + + + + Automatic update + Actualizare automată + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + + + + Allow FreeCAD to automatically download and update the DXF libraries + Permite FreeCAD să descarce automat și să actualizeze bibliotecile DXF + + + + If this is checked, only standard Part objects will be created (fastest) + If this is checked, only standard Part objects will be created (fastest) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + If this is checked, DXF layers will be imported as Draft VisGroups + + + + Use VisGroups + Use VisGroups + + + + mm + mm + + + + SVG / OCA + SVG / OCA + + + + Grid size + Dimensiune grilă + + + + the number of horizontal or vertical lines of the grid + numărul de linii orizontale sau verticale ale grilei + + + + lines + linii + + + + Dimensions + Dimensiuni + + + + display mode + mod afișare + + + + text above (2D) + text deasupra (2D) + + + + text inside (3D) + text interior (3D) + + + + extension lines size + dimensiune extensie linii + + + + Drawing views + Drawing views + + + + Dashed line definition + Dashed line definition + + + + A SVG linestyle definition + A SVG linestyle definition + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + Dashdot line definition + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Definiție linie punctată + + + + 0.02,0.02 + 0.02,0.02 Workbench - + Draft Snap - Draft Snap + Definiție linie punctată - + Draft creation tools Unelte pentru crearea de ciorne - + Draft modification tools Unelte pentru modificarea ciornelor @@ -1621,635 +1721,597 @@ Values with differences below this value will be treated as same. draft - + Draft Command Bar Draft Command Bar - + active command: Comanda activă: - + None Niciunul - + Active Draft command Comanda activă proiect - + X coordinate of next point Coordonata X a punctului următor - + X X - + Y Y - + Z Z - + Y coordinate of next point Coordonata Y a punctului următor - + Z coordinate of next point Coordonata Z a punctului următor - + Radius Raza - + Radius of Circle Raza cercului - + &Relative &Relativ - + Coordinates relative to last point or absolute (SPACE) Coordonatele relative la ultimul punct sau absolute (SPAȚIU) - + F&illed Pl&in - + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) Verifica dacă obiectul ar trebui să apară ca umplut, altfel va apare ca wireframe (i) - + &Finish &Termina - + Finishes the current drawing or editing operation (F) Termina operatiunea curenta de editare sau desenare (F) - + If checked, command will not finish until you press the command button again Dacă bifaţi casuţa, comanda nu se va termina până când nu apăsaţi butonul de comandă din nou - - &Continue - &Continua - - - + If checked, an OCC-style offset will be performed instead of the classic offset Daca este bifat, o expandare tip OCC va fi folosita inlocul expandarii clasice - + &OCC-style offset Expandare tip &OCC - + Add points to the current object Adăuga puncte la obiectul curent - + Remove points from the current object Elimina puncte din obiectul curent - + Make Bezier node sharp - Make Bezier node sharp + Fă nodul Bezier ascuțit - + Make Bezier node tangent - Make Bezier node tangent + Fă nodul Bezier tangent - + Make Bezier node symmetric - Make Bezier node symmetric + Fă nodul Bezier simetric - + &Undo &Anulare - + Undo the last segment (CTRL+Z) Anulare ultimul segment (CTRL + Z) - + &Close &Inchide - + Finishes and closes the current line (C) Încheie şi închide linia curentă (C) - + &Wipe &Şterge - + Wipes the existing segments of this line and starts again from the last point (W) Şterge toate segmentele existente ale acestei linii şi reporneşte de la ultimul punct (W) - + Number of sides Numărul de laturi - + Offset Compensare - + XY XY - + Select XY plane Selectare plan XY - + XZ XZ - + Select XZ plane Selectare plan XZ - + YZ YZ - + Select YZ plane Selectare plan YZ - + View Vizualizare - + Select plane perpendicular to the current view Selectare plan perpendicular pe vizualizarea curentă - + Do not project points to a drawing plane Nu proiectează punctele pe planul desenului - + &Copy &Copie - + If checked, objects will be copied instead of moved (C) Dacă este bifată, obiecte vor fi copiate, și nu mutate (C) - + Text string to draw - Text string to draw + Șir text de desenat - + String Şir - + Height of text - Height of text + Înălțimea textului - + Height - Inaltime + Înălţime - + Intercharacter spacing Intercharacter spacing - + Tracking - Tracking + Urmărire - + Full path to font file: - Full path to font file: + Calea întreagă la fișierul text: - + Open a FileChooser for font file Open a FileChooser for font file - + Set/unset a working plane Set/unset a working plane - + Line Color Culoarea liniei - + Face Color Culoarea feţei - + Line Width Grosimea liniei - + Font Size Dimensiunea font-ului - + Apply to selected objects Se aplică la obiectele selectate - + Toggles Construction Mode Comută în Modul de Construcție - + Select Plane Selectare plan - + Line Linie - + DWire DWire - + Circle Cerc - + Center X Centrul X - + Arc Arc - + Point Punct - + Distance Distance - + Trim Taiere - + Pick Object Alege obiect - + Edit Editare - + Global X Global X - + Global Y Global Y - + Global Z Global Z - + Local X Local X - + Local Y Local Y - + Local Z Local Z - + Invalid Size value. Using 200.0. - Invalid Size value. Using 200.0. + Valoare dimensiune nevalidă. Utilizați 200.0. - + Invalid Tracking value. Using 0. Invalid Tracking value. Using 0. - + Please enter a text string. - Please enter a text string. + Introduceți un șir text. - + Select a Font file - Select a Font file + Selectați un fișier font - + Please enter a font file. - Please enter a font file. + Introduceți un fișier font. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + Found groups: closing each open object inside Grupuri gasite: se inchid toate obiectele deschise din interior - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidificable object: solidifying it Am gasit un obiect solidificabil; il colidific - + Found 2 objects: fusing them Am descoperit 2 obiecte: le unesc - - Found several objects: making a shell - - Found several objects: making a shell - - - - - Found several coplanar objects or faces: making one face - - Found several coplanar objects or faces: making one face - - - - + Found 1 non-parametric objects: draftifying it Am gasit un obiect neparametric; il schitam - - Found 1 closed sketch object: making a face from it - - Am gasit un obiect schita inchis; il convertesc in fata - - - - Found closed wires: making faces - - Found closed wires: making faces - - - - + Found 1 open wire: closing it Am gasit o linie deschisa; o inchid - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Am gasit mai multe margini; le imbin - - Found several non-treatable objects: making compound - - Am gasit mai multe obiecte netratabile; creez complex - - - + Unable to upgrade these objects. - Unable to upgrade these objects. + Nu se poat actualiza aceste obiecte. - + Found 1 block: exploding it - Found 1 block: exploding it + S-a găsit 1 bloc: se extinde - + Found 1 parametric object: breaking its dependencies Am gasit un obiect parametric fara toate dependentele - + Found 2 objects: subtracting them Am gasit doua obiecte; le scadem - + Found several faces: splitting them Am gasit mai multe fete; le divizam - + Found several objects: subtracting them from the first one Am gasit mai multe obiecte; le scadem din primul - + Found 1 face: extracting its wires Am gasit o fateta; ii extragem liniile - + Found only wires: extracting their edges Am gasit doar linii; le extragem marginile - + No more downgrade possible Imposibil de retrogradat - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + Pick a face to define the drawing plane Alege o faţă pentru a defini planul de desenare - + Pick first point: Alege primul punct: - + Create Line - Create Line + Creează o linie - + Create DWire Creează DWire - + DWire has been closed DWire a fost închis - + Last point has been removed Ultimul punct a fost eliminat - + Pick next point: Alege următorul punct: - + Pick next point, or (F)inish or (C)lose: Alege următorul punct, termină(F) sau închide(C): - + BSpline BSpline @@ -2260,373 +2322,367 @@ Values with differences below this value will be treated as same. Curba Spline a fost închisă - + Create BSpline Creează o BSpline BezCurve - BezCurve + Curbă bezier - + Bezier curve has been closed - Bezier curve has been closed + Curba Bezier a fost închisă - + Create BezCurve - Create BezCurve + Creează o curbă Bezier - + Rectangle Dreptunghi - + Create Plane Create Plane - + Create Rectangle Creează un Dreptunghi - + Pick opposite point: Alege punctul opus: - + Pick center point: Alege punctul central: - + Pick radius: Alege raza: - + Pick start angle: Alege unghiul de start: - + Pick aperture: Alege deschiderea: - + Create Circle Creează un Cerc - + Create Arc Creează un Arc de cerc - + Start Angle Unghiul de inceput - + Aperture Deschidere - + Aperture angle: Unghiul de deschidere: - + Polygon Poligon - + Create Polygon Creează un Poligon - + Ellipse Elipsa - + Create Ellipse - Create Ellipse + Creează o elipsă - + Text Text - + Pick location point: Alege punctul locaţiei: - + Create Text Creează un Text - + Dimension Dimensiune - + Create Dimension Creează Cotă - + Edges don't intersect! Muchiile nu se intersectează! - + ShapeString ShapeString - + Pick ShapeString location point: Pick ShapeString location point: - + Create ShapeString Create ShapeString - + Move Mută - + Select an object to move Selectează obiectul pentru mutare - + Pick start point: Alege punctul de start: - + Copy Copiere - + Pick end point: Alege punctul final: - + Change Style Modifică stilul - + Select an object to rotate Selectează un obiect pentru rotire - + Pick rotation center: Alege centrul de rotaţie: - + Rotate Rotire - + Pick base angle: Alege unghiul de bază: - + Pick rotation angle: Alege unghiul de rotaţie: - + Select an object to offset Selectaţi un obiect pentru compensare - + Offset only works on one object at a time Compensarea funcţionează doar pe un singur obiect la un moment dat - + Cannot offset this object type Acest tip de obiect nu poate fi expandat - + Pick distance: Alege distanța - + Select an object to upgrade Selectaţi un obiect pentru upgrade - + Upgrade Upgrade - + Downgrade Downgrade - - Select an object to trim/extend - - Selectare obiect pentru tăiere/extindere - - - + Scale Scalare - + Select an object to scale Selectează un obiect pentru scalare - + Pick base point: Alege punctul de bază: - + Pick scale factor: Alege factorului de scalare: - + Select an object to project - Select an object to project + Selectați un obiect de proiectat - + Select a Draft object to edit - Select a Draft object to edit + Selectați un obiect ciornă de editat - + This object type is not editable Acest tip de obiect nu poate fi editat - + Active object must have more than two points/nodes Obiectul activ trebuie să aibă mai mult de două puncte/noduri - + Selection is not a Knot - Selection is not a Knot + Selecția nu este un nod - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert - Select an object to convert + Selectați un obiect de convertit - + Select an object to array Select an object to array - + Please select base and path objects Please select base and path objects - + Create Point - Create Point + Creează un punct - + Select an object to clone - Select an object to clone + Selectați un obiect de clonat - + Select face(s) on existing object(s) Select face(s) on existing object(s) @@ -2640,41 +2696,212 @@ Values with differences below this value will be treated as same. - - Installed Macros - Macrocomenzi instalate - - - + &Draft &Schiţă - + Utilities - Utilities + Utilități - + Wire tools Instrumente pentru polilinii - + Snapping - Snapping + Ancorare - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Sides - Sides + Părți + + + + BSplines and Bezier curves are not supported by this tool + BSplines and Bezier curves are not supported by this tool + + + + The given object is not planar and cannot be converted into a sketch. + The given object is not planar and cannot be converted into a sketch. + + + + Found several objects: creating a shell + + Found several objects: creating a shell + + + + + Found several coplanar objects or faces: creating one face + + Found several coplanar objects or faces: creating one face + + + + + Found 1 linear object: converting to line + + Found 1 linear object: converting to line + + + + + Found 1 closed sketch object: creating a face from it + + Found 1 closed sketch object: creating a face from it + + + + + Found closed wires: creating faces + + Found closed wires: creating faces + + + + + Found several non-treatable objects: creating compound + + Found several non-treatable objects: creating compound + + + + + Length + Lungime + + + + Angle + Unghi + + + + Length of current segment + Lungimea segmentului curent + + + + Angle of current segment + Unghiul segmentului curent + + + + Check this to lock the current angle (l) + Bifați asta pentru a bloca unghiul curent (l) + + + + Con&tinue + Con&tinuare + + + + &Select edge + &Selectează marginea + + + + Selects an existing edge to be measured by this dimension (E) + Selects an existing edge to be measured by this dimension (E) + + + + Auto + Automat + + + + Sorry, offset of Bezier curves is currently still not supported + + Sorry, offset of Bezier curves is currently still not supported + + + + + Convert to Sketch + Convertește la schiță + + + + Convert to Draft + Convert to Draft + + + + Convert + Converteşte + + + + Array + Matrice + + + + Select object(s) to trim/extend + + Select object(s) to trim/extend + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + Unable to trim these objects, only Draft wires and arcs are supported + + + + + Unable to trim these objects, too many wires + + Unable to trim these objects, too many wires + + + + + These objects don't intersect + + Aceste obiecte nu se intersectează + + + + + Too many intersection points + + Prea multe puncte de intersecţie + + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.qm b/src/Mod/Draft/Resources/translations/Draft_ru.qm index 96684a9d4f..09dcc6dedd 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ru.qm and b/src/Mod/Draft/Resources/translations/Draft_ru.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.ts b/src/Mod/Draft/Resources/translations/Draft_ru.ts index 250162acae..dc7b03fe70 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ru.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ru.ts @@ -1,15 +1,29 @@ + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + + Draft_AddPoint - + Add Point Добавить точку - + Adds a point to an existing wire/bspline Добавляет точку к существующей Направляющей/B-сплайну @@ -17,12 +31,12 @@ Draft_AddToGroup - + Add to group... Добавить в группу... - + Adds the selected object(s) to an existing group Добавляет выбранный объект(ы) в существующую группу @@ -30,12 +44,12 @@ Draft_ApplyStyle - + Apply Current Style Применить текущий стиль - + Applies current line width and color to selected objects Применить текущую ширину линии и цвет для выделенных объектов @@ -43,12 +57,12 @@ Draft_Arc - + Arc Дуга - + Creates an arc. CTRL to snap, SHIFT to constrain Создать дугу. CTRL для привязки, SHIFT для ограничения @@ -56,12 +70,12 @@ Draft_Array - + Array Массив - + Creates a polar or rectangular array from a selected object Создает круговой или прямоугольный массив из выделенного объекта @@ -69,14 +83,14 @@ Draft_BSpline - + B-Spline B-сплайн - + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain - Создает несколько точек В-сплайна. CTRL - привязать, SHIFT - ограничить + Создает В-сплайн, проходящий через заданные точки. CTRL - привязать, SHIFT - ограничить @@ -84,7 +98,7 @@ BezCurve - BezCurve + Кривая Безье @@ -95,12 +109,12 @@ Draft_Circle - + Circle Окружность - + Creates a circle. CTRL to snap, ALT to select tangent objects Создать окружность. CTRL для привязки, ALT для выбора касательной @@ -108,12 +122,12 @@ Draft_Clone - + Clone Клонировать - + Clones the selected object(s) Создаёт дубликат выделенных объектов @@ -121,25 +135,25 @@ Draft_CloseLine - + Close Line Замкнуть линию - + Closes the line being drawn - Закрыть рисуемую линию + Замкнуть рисуемую линию Draft_DelPoint - + Remove Point Удалить точку - + Removes a point from an existing wire or bspline Удаляет точки из существующих Направляющих или B-сплайнов @@ -147,12 +161,12 @@ Draft_Dimension - + Dimension Размер - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Создать "размер". CTRL для привязки, SHIFT для ограничения, ALT для выбора сегмента @@ -160,12 +174,12 @@ Draft_Downgrade - + Downgrade Перестроить - + Explodes the selected objects into simpler objects, or subtract faces Расчленить выбранные объекты на более простые объекты, или вычесть поверхности @@ -173,20 +187,20 @@ Draft_Draft2Sketch - + Draft to Sketch - Набросок эскиза + Преобразовать в эскиз Draft_Drawing - + Drawing Рисунок - + Puts the selected objects on a Drawing sheet. Помещает выбранные объекты на лист чертежа. @@ -194,12 +208,12 @@ Draft_Edit - + Edit Правка - + Edits the active object Редактировать активный объект @@ -207,12 +221,12 @@ Draft_Ellipse - + Ellipse Эллипс - + Creates an ellipse. CTRL to snap Создать эллипс. Нажмите Ctrl, чтобы привязать к узловым точкам @@ -220,25 +234,25 @@ Draft_Facebinder - + Facebinder - Facebinder + Граневяз - + Creates a facebinder object from selected face(s) - Creates a facebinder object from selected face(s) + Инструмент Граневяз. Создаёт объект, состоящий из выделенных граней другого объекта. Draft_FinishLine - + Finish line Закончить линию - + Finishes a line without closing it Закончить линию без ее закрытия @@ -246,51 +260,38 @@ Draft_FlipDimension - + Flip Dimension - Flip Dimension + Перевернуть размер - + Flip the normal direction of a dimension - Flip the normal direction of a dimension + Перевернуть нормальное направление размера Draft_Heal - + Heal - Heal + Лечить - - Heal faultly Draft objects saved from an earlier FreeCAD version - Heal faultly Draft objects saved from an earlier FreeCAD version - - - - Draft_Layer - - - Layer - Layer - - - - Adds a layer - Adds a layer + + Heal faulty Draft objects saved from an earlier FreeCAD version + Heal faulty Draft objects saved from an earlier FreeCAD version Draft_Line - + Line Линия - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Создать линию по 2-м точкам. CTRL для привязки, SHIFT для ограничения @@ -298,12 +299,12 @@ Draft_Move - + Move Перемещение - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy Перемещает выбранные объекты между 2 точками. CTRL, для привязки, SHIFT, для ограничения, ALT для копирования @@ -311,12 +312,12 @@ Draft_Offset - + Offset Смещение - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Смещения активного объекта.CTRL, для привязки, SHIFT, для ограничения, ALT для копирования @@ -324,25 +325,25 @@ Draft_PathArray - + PathArray - PathArray + Массив по направляющей - + Creates copies of a selected object along a selected path. - Creates copies of a selected object along a selected path. + Создаёт копии выбранного объекта вдоль выбранного пути. Draft_Point - + Point Точка - + Creates a point object Создать объект точка @@ -350,12 +351,12 @@ Draft_Polygon - + Polygon Многоугольник - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Создать правильный многоугольник. CTRL для привязки, SHIFT для ограничения @@ -363,12 +364,12 @@ Draft_Rectangle - + Rectangle Прямоугольник - + Creates a 2-point rectangle. CTRL to snap Создать прямоугольник по двум точкам. CTRL для привязки @@ -376,12 +377,12 @@ Draft_Rotate - + Rotate Повернуть - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Поворот выделенных объектов. CTRL для привязки, SHIFT, для ограничения, ALT для создания копии @@ -389,12 +390,12 @@ Draft_Scale - + Scale Масштаб - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Масштабирует выбранные объекты из базовой точки. CTRL, для привязки, SHIFT, для ограничения, ALT для копирования @@ -402,12 +403,12 @@ Draft_SelectGroup - + Select group Выбрать группу - + Selects all objects with the same parents as this group Выделяет все объекты группы, включая родительские @@ -415,12 +416,12 @@ Draft_SelectPlane - + SelectPlane Выбор плоскости - + Select a working plane for geometry creation Выберите рабочую плоскость для создания геометрии @@ -428,17 +429,17 @@ Draft_Shape2DView - + Shape 2D view 2D вид фигуры - + Creates Shape 2D views of selected objects Создать 2D виды выбранных объектов - + Convert bidirectionally between Draft and Sketch objects Конвертировать двунаправленно между объектами проекта и эскиза @@ -446,12 +447,12 @@ Draft_ShapeString - + Shape from text... - Shape from text... + Текст в кривую... - + Creates text string in shapes. Creates text string in shapes. @@ -459,12 +460,12 @@ Draft_ShowSnapBar - + Show Snap Bar Показывать панель привязок - + Shows Draft snap toolbar Показать панель инструментов привязки черчения @@ -472,194 +473,194 @@ Draft_Snap_Angle - + Angles - Angles + Углы - + Snaps to 45 and 90 degrees points on arcs and circles - Snaps to 45 and 90 degrees points on arcs and circles + Привязка к октантам дуг и окружностей Draft_Snap_Center - + Center - Center + Центр - + Snaps to center of circles and arcs - Snaps to center of circles and arcs + Привязка к центру окружности или дуги Draft_Snap_Dimensions - + Dimensions Размеры - + Shows temporary dimensions when snapping to Arch objects - Shows temporary dimensions when snapping to Arch objects + Временно показывать размер при привязке к дуге Draft_Snap_Endpoint - + Endpoint - Endpoint + Конечные точки - + Snaps to endpoints of edges - Snaps to endpoints of edges + Привязывает по конечным точкам ребра Draft_Snap_Extension - + Extension - Extension + Продолжение - + Snaps to extension of edges - Snaps to extension of edges + Привязка к продолжению сегмента ребра Draft_Snap_Grid - + Grid - Grid + Сетка - + Snaps to grid points - Snaps to grid points + Привязывает по сетке Draft_Snap_Intersection - + Intersection Пересечение - + Snaps to edges intersections - Snaps to edges intersections + Привязка к пересечению рёбер Draft_Snap_Lock - + Toggle On/Off - Toggle On/Off + Включить/выключить привязки - + Activates/deactivates all snap tools at once - Activates/deactivates all snap tools at once + Включает и выключает все установленные привязки Draft_Snap_Midpoint - + Midpoint - Midpoint + Середина - + Snaps to midpoints of edges - Snaps to midpoints of edges + Привязывает к середине ребра Draft_Snap_Near - + Nearest - Nearest + Ближайшие - + Snaps to nearest point on edges - Snaps to nearest point on edges + Привязывает к ближайшим точкам на рёбрах Draft_Snap_Ortho - + Ortho - Ortho + Ортогональная - + Snaps to orthogonal and 45 degrees directions - Snaps to orthogonal and 45 degrees directions + Привязывает к ортогональным и на 45 градусов пересечения продолжения сегментов Draft_Snap_Parallel - + Parallel - Parallel + Параллельно - + Snaps to parallel directions of edges - Snaps to parallel directions of edges + Привязывает параллельные направления рёбер Draft_Snap_Perpendicular - + Perpendicular - Perpendicular + Нормаль - + Snaps to perpendicular points on edges - Snaps to perpendicular points on edges + Перпенликуояпная привязка к ребру Draft_Snap_WorkingPlane - + Working Plane - Working Plane + К рабочей плоскости - + Restricts the snapped point to the current working plane - Restricts the snapped point to the current working plane + Привязывает точки к рабочей плоскости Draft_Text - + Text Текст - + Creates an annotation. CTRL to snap Создать надпись. CTRL для привязки @@ -667,12 +668,12 @@ Draft_ToggleConstructionMode - + Toggle construcion Mode Переключить режим конструирования - + Toggles the Construction Mode for next objects. Переключение режима конструирования для следующих объектов. @@ -680,12 +681,12 @@ Draft_ToggleContinueMode - + Toggle Continue Mode - Toggle Continue Mode + Переключить режима продолжения - + Toggles the Continue Mode for next commands. Переключение режима продления для следующей команды. @@ -693,12 +694,12 @@ Draft_ToggleDisplayMode - + Toggle display mode Переключить режим отображения - + Swaps display mode of selected objects between wireframe and flatlines Переключает режим отображения выбранных объектов между каркасным и флэтлайновым @@ -706,25 +707,25 @@ Draft_ToggleGrid - + Toggle Grid Переключить сетку - - Toggles the Draft gid on/off - Включение или выключение сетки чертежа + + Toggles the Draft grid on/off + Toggles the Draft grid on/off Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Обрезать удлинить выбранный объект или выдавить одиночную грань. CTRL привязки, SHIFT привязать к текущему сегменту или нормально, ALT инвертировать @@ -732,12 +733,12 @@ Draft_UndoLine - + Undo last segment Отменить последний сегмент - + Undoes the last drawn segment of the line being drawn Отмена последнего нарисованного сегмента рисуемой линии @@ -745,25 +746,38 @@ Draft_Upgrade - + Upgrade Обновить - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces Объединить выбранные объекты в один, или преобразовать замкнутые нааправляющие в скругленные поверхности, или объединить поверхности + + Draft_VisGroup + + + VisGroup + VisGroup + + + + Adds a VisGroup + Adds a VisGroup + + Draft_Wire - + DWire DWire - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain Создать многоточечную линию (DWire). CTRL для привязки, SHIFT для ограничения @@ -771,12 +785,12 @@ Draft_WireToBSpline - + Wire to BSpline Направляющая в BSpline - + Converts between Wire and BSpline Преобразование Направляющей в B-сплайн и наоборот @@ -804,17 +818,17 @@ цвет по умолчанию для символов привязки - + This is the default color for objects being drawn while in construction mode. Цвет по умолчанию для объектов, обрабатываемых в режиме конструктора. - + This is the default group name for construction geometry Имя группы по умолчанию для конструктора геометрии - + Construction Конструктор @@ -917,17 +931,17 @@ such as "Arial:Bold" Оригинальный цвет и толщина линии - + if this is checked, paper space objects will be imported too если выбран этот пункт, объекты в пространстве листа будут тоже импортированы - + if this is unchecked, texts/mtexts won't be imported если этот пункт не выбран, тексты/мультитексты импортированы не будут - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. При экспорте сплайнов в DXF, они превращаются в полилинии. Это значение максимальной длины для каждого из сегментов полилинии. Если 0, то весь сплайн рассматривается как прямой отрезок. @@ -952,7 +966,7 @@ such as "Arial:Bold" Общие настройки - + Construction group name Имя проектирующей группы @@ -969,22 +983,22 @@ Values with differences below this value will be treated as same. Значения, отклоняющиеся на меньшую величину, будут также приемлемыми. - + DXF format options Параметры формата DXF - + Check this if you want the non-named blocks (beginning with a *) to be imported too Проверьте это, если вы хотите неименованные блоки (начиная с *) для импорта тоже - + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... Если отмечено, freecad будет пытаться совмещать совпадающие объекты. Осторожно, это может занять некоторое время ... - + Join geometry Присоединиться к геометрии @@ -1084,32 +1098,32 @@ Values with differences below this value will be treated as same. Выбор базовых объектов после копирования - + If checked, a grid will appear when drawing Если флажок установлен, сетка будет отображаться при черчении - + Use grid Использование сетки - + Grid spacing Расстояние между линиями сетки - + The spacing between each grid line Расстояние между каждой линией сетки - + Main lines every Основные линии каждые - + Mainlines will be drawn thicker. Specify here how many squares between mainlines. Основные линии рисуются толще. Укажите здесь, сколько квадратов между линиями. @@ -1139,22 +1153,22 @@ Values with differences below this value will be treated as same. Вправо - + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable Если этот параметр выбран, объекты одного слоя будут объединены в блоки. Это ускорит работу с объектами, но сделает сложнее в редактировании - + Group layers into blocks Группировать слои в блоки - + If this is checked, all objects containing faces will be exported as 3d polyfaces Если этот параметр выбран, все объекты, содержащие грани, будут экспортированы как 3d многогранники - + Export 3D objects as polyface meshes Экспорт 3D объектов как многогранной сетки @@ -1194,37 +1208,37 @@ Values with differences below this value will be treated as same. Показать трекер Рабочего Плана - + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command Если флажок установлен, сетка Чертежа всегда будет видна при активном рабочем окружении. В любом другом случае только при использовании соответствующей команды - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document Если этот параметр выбран, то импортированные тексты будут получать стандартный размер текста чертежа, взамен размера указанного в DXF файлах - + Use standard font size for texts Использовать стандартный размер шрифта для текстов - + If this is checked, hatches will be converted into simple wires Если этот параметр выбран, то штриховка будет преобразовываться в простые каркасные связи - + Import hatch boundaries as wires Импорт областей штриховки как контуров - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width Если этот параметр выбран, то когда определена ширина полилинии, они будут отображаться как закрытые каркасы с правильной шириной - + Render polylines with width Отображение полилиний с использованием толшины @@ -1256,102 +1270,102 @@ Values with differences below this value will be treated as same. When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. - When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. + Если включено, Draft будет создавать примитивы Part вместо объектов Draft, если это возможно. Use Part Primitives when available - Use Part Primitives when available + Использовать примитивы Part, если возможно Snapping - Snapping + Привязка If this is checked, snapping is activated without the need to press the snap mod key - If this is checked, snapping is activated without the need to press the snap mod key + Если включить, то привязки будут работать без необходимости нажатия клавиши модификатора Always snap (disable snap mod) - Always snap (disable snap mod) + Всегда привязывать (лткдючить модификатор привязки) - + Construction geometry вспомогательная геометрия - + Construction geometry color - Construction geometry color + Цвет вспомогательной геометрии - + Import - Import - - - - texts and dimensions - texts and dimensions - - - - points - points + импорт + texts and dimensions + текст и размеры + + + + points + точки + + + layouts layouts - + *blocks *blocks - + If this is checked, the exported objects will be projected to reflect the current view direction - If this is checked, the exported objects will be projected to reflect the current view direction + Если включить, то экспортируемые объекты будут проецироваться относительно текущего вида - + Project exported objects along current view direction - Project exported objects along current view direction + Проецировать объекты относительно текущего вида - + Ellipse export is badly supported. Use this to export them as polylines instead. - Ellipse export is badly supported. Use this to export them as polylines instead. + Экспорт эллипсов плохо реализован. Экспортируйте эллипсы как полилинии. - + DWG format options - DWG format options + опции формата DWG - + Path to Teigha File Converter - Path to Teigha File Converter + Путь к файловому конвертеру Teigha - + The path to your Teigha File Converter executable The path to your Teigha File Converter executable Visual settings - Visual settings + Визуальные настройки Visual Settings - Visual Settings + Визуальные Настройки @@ -1361,17 +1375,17 @@ Values with differences below this value will be treated as same. Default line width - Default line width + Ширина линии по умолчанию Snap symbols style - Snap symbols style + Стиль символа привязки Draft classic style - Draft classic style + Классический стиль Draft @@ -1381,117 +1395,102 @@ Values with differences below this value will be treated as same. Color - Color + Цвет Hatch patterns resolution - Hatch patterns resolution + Масштаб шаблонов штриховки Grid - Grid + Сетка - + Always show the grid - Always show the grid + Ысегда показывать сетку Texts and dimensions - Texts and dimensions + Текст и размеры Texts - Texts + Текст font - font + шрифт Internal font - Internal font + встроенный шрифт size - size + размер - + Dimensions arrows - Dimensions arrows + Стрелки размерных линий - + style - style + стиль - + Dot - Dot + Точка - + Circle Окружность - - - Arrow - Arrow - - - - The default size of arrows - The default size of arrows - - - - Dimensions lines - Dimensions lines - - - - text above - text above - - text inside - text inside + Arrow + Стрелка + The default size of arrows + Стиль стрелок по умолчанию + + + The default size of dimensions extension lines The default size of dimensions extension lines Dimensions text - Dimensions text + Текст размеров orientation - orientation + расположение spacing - spacing + отступ The space between the dimension line and the dimension text - The space between the dimension line and the dimension text + Отступ между размерной линией и текстом @@ -1501,118 +1500,218 @@ Values with differences below this value will be treated as same. Select a font file - Select a font file + Выберите файл шрифта Fill objects with faces whenever possible - Fill objects with faces whenever possible + Залить объекты поверхностями, если это возможно - - DXF / DWG options - DXF / DWG options - - - + Create Создать - - If thi sis checked, only standard Part objects will be created (fastest) - If thi sis checked, only standard Part objects will be created (fastest) - - - + simple Part shapes - simple Part shapes + Простые формы Part - + If this is checked, parametric Draft objects will be created whenever possible - If this is checked, parametric Draft objects will be created whenever possible + Если возможно, будут создаваться параметрические объекты Draft - + Draft objects - Draft objects + Объекты Draft - + If this is checked, sketches will be created whenever possible - If this is checked, sketches will be created whenever possible + Если включено, то будут создаваться эскизы Sketch, если возможно - + Sketches - Sketches + Эскизы (Sketches) - + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. - If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. + Если включено, будут использоваться цвета DXF объектов, когда возможно. Иначе будет использован цвет по умолчанию - + Get original colors from the DXF file - Get original colors from the DXF file + Использовать цвета из файла DXF - - If this is checked, DXF layers will be imported as Draft layers - If this is checked, DXF layers will be imported as Draft layers - - - - Use Draft Layers - Use Draft Layers - - - + Treat ellipses and splines as polylines - Treat ellipses and splines as polylines + Преобразовать Эллипсы в полилинии - + Max Spline Segment: - Max Spline Segment: - - - - SVG / OCA options - SVG / OCA options + Макс. шагов сегмента Export style - Export style + Стиль экспорта Snapping settings - Snapping settings + Настроки привязок Show the unit suffix in dimensions - Show the unit suffix in dimensions + Показать суффикс единиц для размеров + + + + DXF / DWG + DXF / DWG + + + + Automatic update + Automatic update + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + + + + Allow FreeCAD to automatically download and update the DXF libraries + Allow FreeCAD to automatically download and update the DXF libraries + + + + If this is checked, only standard Part objects will be created (fastest) + If this is checked, only standard Part objects will be created (fastest) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + If this is checked, DXF layers will be imported as Draft VisGroups + + + + Use VisGroups + Use VisGroups + + + + mm + мм + + + + SVG / OCA + SVG / OCA + + + + Grid size + Grid size + + + + the number of horizontal or vertical lines of the grid + the number of horizontal or vertical lines of the grid + + + + lines + lines + + + + Dimensions + Размеры + + + + display mode + display mode + + + + text above (2D) + text above (2D) + + + + text inside (3D) + text inside (3D) + + + + extension lines size + extension lines size + + + + Drawing views + Drawing views + + + + Dashed line definition + Dashed line definition + + + + A SVG linestyle definition + A SVG linestyle definition + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + Dashdot line definition + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Dotted line definition + + + + 0.02,0.02 + 0.02,0.02 Workbench - + Draft Snap - Draft Snap + Привязки Draft - + Draft creation tools инструменты создания чертежа - + Draft modification tools инструменты изменения чертежа @@ -1620,635 +1719,597 @@ Values with differences below this value will be treated as same. draft - + Draft Command Bar - Draft Command Bar + Командная строка Draft - + active command: Текущая команда: - + None Ничего - + Active Draft command Активная команда черчения - + X coordinate of next point абсцисса следующей точки - + X X - + Y Y - + Z Z - + Y coordinate of next point ордината следующей точки - + Z coordinate of next point аппликата следующей точки - + Radius Радиус - + Radius of Circle Радиус окружности - + &Relative &Относительно - + Coordinates relative to last point or absolute (SPACE) Координаты относительно последней точки или абсолютные (SPACE) - + F&illed Заполненный - + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) Установить флажок если объект должен отображаться как заполненый, в противном случае он будет отображаться как каркас (i) - + &Finish &Готово - + Finishes the current drawing or editing operation (F) Завершить текущий чертёж или операцию редактирования (F) - + If checked, command will not finish until you press the command button again Если установлен, команда не будет завершена до нажатия кнопки снова - - &Continue - Продолжить - - - + If checked, an OCC-style offset will be performed instead of the classic offset Если флажок установлен, вместо классического смещения будет выполняться смещение в стиле OCC - + &OCC-style offset Смещение в стиле &OCC - + Add points to the current object Добавление точек к текущему объекту - + Remove points from the current object Удаление точек из текущего объекта - + Make Bezier node sharp - Make Bezier node sharp + Сделать узел Безье острым - + Make Bezier node tangent - Make Bezier node tangent + Создать касательный узел Безье - + Make Bezier node symmetric - Make Bezier node symmetric + Создать симметричный узел Безье - + &Undo &Отменить - + Undo the last segment (CTRL+Z) Отменить последний сегмент (Ctrl + Z) - + &Close &Закрыть - + Finishes and closes the current line (C) Закончить и замкнуть текущую линию (C) - + &Wipe Стереть - + Wipes the existing segments of this line and starts again from the last point (W) Стирает существующие сегменты этой линии и начинает снова с последней точки (W) - + Number of sides Количество сторон - + Offset Смещение - + XY XY - + Select XY plane Выберите плоскость XY - + XZ XZ - + Select XZ plane Выберите плоскость XZ - + YZ YZ - + Select YZ plane Выберите плоскость YZ - + View Вид - + Select plane perpendicular to the current view Выберите плоскость, перпендикулярную текущему виду - + Do not project points to a drawing plane Не проецировать точки на плоскость рисунка - + &Copy &Копировать - + If checked, objects will be copied instead of moved (C) Если флажок установлен, объекты будут копироваться, а не перемещаться (C) - + Text string to draw - Text string to draw + Cтрока текста для рисования - + String Строка - + Height of text - Height of text + Высота текста - + Height Высота - + Intercharacter spacing Intercharacter spacing - + Tracking - Tracking + Отслеживание - + Full path to font file: - Full path to font file: + Полный путь к файлу шрифта: - + Open a FileChooser for font file - Open a FileChooser for font file + Открыть ВыборФайла для файла шрифта - + Set/unset a working plane - Set/unset a working plane + Указать/ снять рабочую плоскость - + Line Color Цвет линии - + Face Color Цвет грани - + Line Width Толщина линии - + Font Size Размер шрифта - + Apply to selected objects Применить к выбранным объектам - + Toggles Construction Mode Переключение режима конструирования - + Select Plane Выберите плоскость - + Line Линия - + DWire DWire - + Circle Окружность - + Center X Центр X - + Arc Дуга - + Point Точка - + Distance Расстояние - + Trim Обрезка - + Pick Object Выберите объект - + Edit Правка - + Global X - Global X + Глобальный X - + Global Y - Global Y + Глобальный Y - + Global Z - Global Z + Глобальный Z - + Local X - Local X + Локальный X - + Local Y - Local Y + Локальный Y - + Local Z - Local Z + Локальный Z - + Invalid Size value. Using 200.0. Invalid Size value. Using 200.0. - + Invalid Tracking value. Using 0. Invalid Tracking value. Using 0. - + Please enter a text string. Please enter a text string. - + Select a Font file - Select a Font file + Выберите файл шрифта - + Please enter a font file. - Please enter a font file. + Пожалуйста, введите файл шрифта. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + Found groups: closing each open object inside Найдены группы: закрытие каждого открытого объекта внутри - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidificable object: solidifying it Найден 1 незамкнутый объект: исправляем его - + Found 2 objects: fusing them Найдены два объекта: слияю их - - Found several objects: making a shell - - Found several objects: making a shell - - - - - Found several coplanar objects or faces: making one face - - Found several coplanar objects or faces: making one face - - - - + Found 1 non-parametric objects: draftifying it Найден один непараметрический объект: draftifying it - - Found 1 closed sketch object: making a face from it - - Найден закрытый эскиз объекта: создаю из него лицо - - - - Found closed wires: making faces - - Found closed wires: making faces - - - - + Found 1 open wire: closing it Найден один открытый провод: закрываю его - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Найдено несколько ребер: провожу их - - Found several non-treatable objects: making compound - - Найдено несколько неизлечимых объектов: создаю соединения - - - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 parametric object: breaking its dependencies Найден один параметрический объект: уничтожаю его зависимости - + Found 2 objects: subtracting them Найдено 2 объекта: вычитание их - + Found several faces: splitting them Найдено несколько поверхностей: расщепите их - + Found several objects: subtracting them from the first one Найдено несколько объектов: вычитание их из первого - + Found 1 face: extracting its wires Найдена 1 поверхность: извлечение ее направляющих - + Found only wires: extracting their edges Найдены только направляющие: извлечение их кромок - + No more downgrade possible Дальнейший откат обновлений не возможен - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + Pick a face to define the drawing plane Укажите грань, чтобы задать плоскость рисования - + Pick first point: Укажите первую точку - + Create Line - Create Line + Создать линию - + Create DWire Создать DWire - + DWire has been closed DWire был закрыт - + Last point has been removed Последняя точка была удалена - + Pick next point: Укажите следующую точку - + Pick next point, or (F)inish or (C)lose: Укажите следующую точку, нажмите (F) для завершения или (C) для отмены - + BSpline BSpline @@ -2259,421 +2320,583 @@ Values with differences below this value will be treated as same. Произошло закрытие сплайна - + Create BSpline Создать BSpline BezCurve - BezCurve + Кривая Безье - + Bezier curve has been closed - Bezier curve has been closed + Кривая Безье закрыта - + Create BezCurve - Create BezCurve + Создать кривую Безье - + Rectangle Прямоугольник - + Create Plane - Create Plane + Создать плоскость - + Create Rectangle Создать прямоугольник - + Pick opposite point: Укажите противоположную точку - + Pick center point: Укажите центральную точку - + Pick radius: Укажите радиус - + Pick start angle: Укажите начальный угол - + Pick aperture: Выберите прицел: - + Create Circle Создать круг - + Create Arc Создать дугу - + Start Angle Начальный угол - + Aperture Отверстие - + Aperture angle: Угол прицела: - + Polygon Многоугольник - + Create Polygon Создать полигон - + Ellipse Эллипс - + Create Ellipse - Create Ellipse + Создать эллипс - + Text Текст - + Pick location point: Выберите местоположение точки: - + Create Text Создать Текст - + Dimension Размер - + Create Dimension Создать Измерение - + Edges don't intersect! Ребра не пересекаются! - + ShapeString ShapeString - + Pick ShapeString location point: Pick ShapeString location point: - + Create ShapeString Create ShapeString - + Move Перемещение - + Select an object to move Выберите объект для перемещения - + Pick start point: Укажите начальную точку - + Copy Скопировать - + Pick end point: Выберите конечную точку: - + Change Style Изменить Стиль - + Select an object to rotate Выделите объект для поворота - + Pick rotation center: Выберите центр вращения: - + Rotate Повернуть - + Pick base angle: Выберите базу угла - + Pick rotation angle: Выберите угол поворота: - + Select an object to offset Выделите объект для смещения - + Offset only works on one object at a time Смещение работает одновременно только на один объект - + Cannot offset this object type Не удается компенсировать этот тип объекта - + Pick distance: Выберите расстояние - + Select an object to upgrade Выбор объекта для обновления - + Upgrade Обновить - + Downgrade Перестроить - - Select an object to trim/extend - - Выберите объект для обрезки/продления - - - + Scale Масштаб - + Select an object to scale Выберите объект для масштабирования - + Pick base point: Выбор базовой точки - + Pick scale factor: Выберите коэффициент масштабирования: - + Select an object to project - Select an object to project + Выберите объект для проекции - + Select a Draft object to edit - Select a Draft object to edit + Выберите объект Draft для редактирования - + This object type is not editable Этот тип объекта не редактируется - + Active object must have more than two points/nodes Активный объект должен иметь более двух точек/узлов - + Selection is not a Knot Selection is not a Knot - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert - Select an object to convert - + Выберите объект для преобразования - + Select an object to array - Select an object to array + Выберите объект для создания массива - + Please select base and path objects Please select base and path objects - + Create Point - Create Point + Создать точку - + Select an object to clone - Select an object to clone + Выделите объект для клонирования - + Select face(s) on existing object(s) - Select face(s) on existing object(s) - + Выберите поверхность(и) на существующем(их) объекте(ах) Teigha File Converter not found, DWG support is disabled. - Teigha File Converter not found, DWG support is disabled. - + Конвертер файлов Teigha не найден, поддержка DWG отключена. - - Installed Macros - Установленные макросы - - - + &Draft &Черчение - + Utilities Utilities - + Wire tools Проволочные инструменты - + Snapping - Snapping + Привязка - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Sides - Sides + Стороны + + + + BSplines and Bezier curves are not supported by this tool + BSplines and Bezier curves are not supported by this tool + + + + The given object is not planar and cannot be converted into a sketch. + The given object is not planar and cannot be converted into a sketch. + + + + Found several objects: creating a shell + + Found several objects: creating a shell + + + + + Found several coplanar objects or faces: creating one face + + Found several coplanar objects or faces: creating one face + + + + + Found 1 linear object: converting to line + + Found 1 linear object: converting to line + + + + + Found 1 closed sketch object: creating a face from it + + Found 1 closed sketch object: creating a face from it + + + + + Found closed wires: creating faces + + Found closed wires: creating faces + + + + + Found several non-treatable objects: creating compound + + Found several non-treatable objects: creating compound + + + + + Length + Длина + + + + Angle + Угол + + + + Length of current segment + Length of current segment + + + + Angle of current segment + Angle of current segment + + + + Check this to lock the current angle (l) + Check this to lock the current angle (l) + + + + Con&tinue + &Продолжить + + + + &Select edge + &Select edge + + + + Selects an existing edge to be measured by this dimension (E) + Selects an existing edge to be measured by this dimension (E) + + + + Auto + Auto + + + + Sorry, offset of Bezier curves is currently still not supported + + Sorry, offset of Bezier curves is currently still not supported + + + + + Convert to Sketch + Convert to Sketch + + + + Convert to Draft + Convert to Draft + + + + Convert + Convert + + + + Array + Массив + + + + Select object(s) to trim/extend + + Select object(s) to trim/extend + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + Unable to trim these objects, only Draft wires and arcs are supported + + + + + Unable to trim these objects, too many wires + + Unable to trim these objects, too many wires + + + + + These objects don't intersect + + These objects don't intersect + + + + + Too many intersection points + + Too many intersection points + + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer diff --git a/src/Mod/Draft/Resources/translations/Draft_sr.qm b/src/Mod/Draft/Resources/translations/Draft_sr.qm new file mode 100644 index 0000000000..a6cbca8e3f Binary files /dev/null and b/src/Mod/Draft/Resources/translations/Draft_sr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sr.ts b/src/Mod/Draft/Resources/translations/Draft_sr.ts new file mode 100644 index 0000000000..4806cb7697 --- /dev/null +++ b/src/Mod/Draft/Resources/translations/Draft_sr.ts @@ -0,0 +1,2927 @@ + + + + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + Преузимање dxf библиотека неуcпешно. +Молим,преузмите их мануелно cа: +https://github.com/yorikvanhavre/Draft-dxf-importer +и cмеcтите их у вашу датотеку макро-наредби. + + + + Draft_AddPoint + + + Add Point + Додај тачку + + + + Adds a point to an existing wire/bspline + Adds a point to an existing wire/bspline + + + + Draft_AddToGroup + + + Add to group... + Додај групи... + + + + Adds the selected object(s) to an existing group + Додаје изабрани објекат постојећој групи + + + + Draft_ApplyStyle + + + Apply Current Style + Примени Тренутни стил + + + + Applies current line width and color to selected objects + Примена текуће ширине и боје линије на одабране објекте + + + + Draft_Arc + + + Arc + Лук + + + + Creates an arc. CTRL to snap, SHIFT to constrain + Креира лук. 'CTRL' да контролисано одскочи, 'SHIFT' да ограничи + + + + Draft_Array + + + Array + Поредак + + + + Creates a polar or rectangular array from a selected object + Creates a polar or rectangular array from a selected object + + + + Draft_BSpline + + + B-Spline + B-Spline + + + + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain + + + + Draft_BezCurve + + + BezCurve + BezCurve + + + + Creates a Bezier curve. CTRL to snap, SHIFT to constrain + Creates a Bezier curve. CTRL to snap, SHIFT to constrain + + + + Draft_Circle + + + Circle + Круг + + + + Creates a circle. CTRL to snap, ALT to select tangent objects + Креира круг. 'CTRL' да контролисано одскочи, 'ALT' да бисте изабрали објекте тангенте + + + + Draft_Clone + + + Clone + Клон + + + + Clones the selected object(s) + Клонира одабрани објекат/те + + + + Draft_CloseLine + + + Close Line + Затвори линију + + + + Closes the line being drawn + Затвара линију која се црта + + + + Draft_DelPoint + + + Remove Point + Уклони тачку + + + + Removes a point from an existing wire or bspline + Removes a point from an existing wire or bspline + + + + Draft_Dimension + + + Dimension + Димензија + + + + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment + Креира димензију. 'CTRL' контролисано одскочи, SHIFT да ограничи, ALT да бисте изабрали сегмент + + + + Draft_Downgrade + + + Downgrade + умањити + + + + Explodes the selected objects into simpler objects, or subtract faces + Explodes the selected objects into simpler objects, or subtract faces + + + + Draft_Draft2Sketch + + + Draft to Sketch + Draft to Sketch + + + + Draft_Drawing + + + Drawing + Цртеж + + + + Puts the selected objects on a Drawing sheet. + Ставља одабране објекте на листу цртежа. + + + + Draft_Edit + + + Edit + Измени + + + + Edits the active object + Мења активни објекат + + + + Draft_Ellipse + + + Ellipse + Елипса + + + + Creates an ellipse. CTRL to snap + Creates an ellipse. CTRL to snap + + + + Draft_Facebinder + + + Facebinder + Facebinder + + + + Creates a facebinder object from selected face(s) + Creates a facebinder object from selected face(s) + + + + Draft_FinishLine + + + Finish line + Завршна линија + + + + Finishes a line without closing it + Завршава линију без затварања + + + + Draft_FlipDimension + + + Flip Dimension + Flip Dimension + + + + Flip the normal direction of a dimension + Flip the normal direction of a dimension + + + + Draft_Heal + + + Heal + Heal + + + + Heal faulty Draft objects saved from an earlier FreeCAD version + Heal faulty Draft objects saved from an earlier FreeCAD version + + + + Draft_Line + + + Line + Линија + + + + Creates a 2-point line. CTRL to snap, SHIFT to constrain + Прави линију на основу 2 тачке. 'CTRL' да контролисано одскочи, 'SHIFT' да ограничи + + + + Draft_Move + + + Move + Премести + + + + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy + Помера одабране предмете између 2 тачке. 'CTRL' да контролисано одскочи, 'SHIFT' да ограничите, 'ALT' да копирате + + + + Draft_Offset + + + Offset + Померај + + + + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy + + + + Draft_PathArray + + + PathArray + PathArray + + + + Creates copies of a selected object along a selected path. + Creates copies of a selected object along a selected path. + + + + Draft_Point + + + Point + Тачка + + + + Creates a point object + Креира тачку објекта + + + + Draft_Polygon + + + Polygon + Многоугао + + + + Creates a regular polygon. CTRL to snap, SHIFT to constrain + Creates a regular polygon. CTRL to snap, SHIFT to constrain + + + + Draft_Rectangle + + + Rectangle + Правоугаоник + + + + Creates a 2-point rectangle. CTRL to snap + Прави правоугаоник уз помоћ 2 тачке. 'CTRL' да контролисано одскочи + + + + Draft_Rotate + + + Rotate + Ротирати + + + + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy + Ротира одабране предмет. 'CTRL' да контролисано одскочи, 'SHIFT' да ограничи, 'ALT' креира копију + + + + Draft_Scale + + + Scale + увеличај/умањи + + + + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy + Увеличава/смањује изабране објекте из основне тачке. 'CTRL' да контролисано одскочи, 'SHIFT' да ограничи, 'ALT' да копирате + + + + Draft_SelectGroup + + + Select group + Одабери групу + + + + Selects all objects with the same parents as this group + Одабире све објекте са истим родитељима за ову групу + + + + Draft_SelectPlane + + + SelectPlane + Изабери раван + + + + Select a working plane for geometry creation + Изаберите радну површину за стварање геометрије + + + + Draft_Shape2DView + + + Shape 2D view + Shape 2D view + + + + Creates Shape 2D views of selected objects + Creates Shape 2D views of selected objects + + + + Convert bidirectionally between Draft and Sketch objects + Convert bidirectionally between Draft and Sketch objects + + + + Draft_ShapeString + + + Shape from text... + Shape from text... + + + + Creates text string in shapes. + Creates text string in shapes. + + + + Draft_ShowSnapBar + + + Show Snap Bar + Show Snap Bar + + + + Shows Draft snap toolbar + Shows Draft snap toolbar + + + + Draft_Snap_Angle + + + Angles + Углови + + + + Snaps to 45 and 90 degrees points on arcs and circles + Snaps to 45 and 90 degrees points on arcs and circles + + + + Draft_Snap_Center + + + Center + Центар + + + + Snaps to center of circles and arcs + Snaps to center of circles and arcs + + + + Draft_Snap_Dimensions + + + Dimensions + Димензије + + + + Shows temporary dimensions when snapping to Arch objects + Shows temporary dimensions when snapping to Arch objects + + + + Draft_Snap_Endpoint + + + Endpoint + Крајња тачка + + + + Snaps to endpoints of edges + Поравнај са крајњим тачкама ивица + + + + Draft_Snap_Extension + + + Extension + Додатак + + + + Snaps to extension of edges + Поравнај са продужетком ивица + + + + Draft_Snap_Grid + + + Grid + Мрежа + + + + Snaps to grid points + Поравнај са мрежним тачкама + + + + Draft_Snap_Intersection + + + Intersection + Преcек + + + + Snaps to edges intersections + Snaps to edges intersections + + + + Draft_Snap_Lock + + + Toggle On/Off + Toggle On/Off + + + + Activates/deactivates all snap tools at once + Activates/deactivates all snap tools at once + + + + Draft_Snap_Midpoint + + + Midpoint + Средишња тачка + + + + Snaps to midpoints of edges + Snaps to midpoints of edges + + + + Draft_Snap_Near + + + Nearest + Најближи + + + + Snaps to nearest point on edges + Snaps to nearest point on edges + + + + Draft_Snap_Ortho + + + Ortho + Ortho + + + + Snaps to orthogonal and 45 degrees directions + Snaps to orthogonal and 45 degrees directions + + + + Draft_Snap_Parallel + + + Parallel + Паралелно + + + + Snaps to parallel directions of edges + Snaps to parallel directions of edges + + + + Draft_Snap_Perpendicular + + + Perpendicular + Управан + + + + Snaps to perpendicular points on edges + Snaps to perpendicular points on edges + + + + Draft_Snap_WorkingPlane + + + Working Plane + Радна раван + + + + Restricts the snapped point to the current working plane + Restricts the snapped point to the current working plane + + + + Draft_Text + + + Text + Текст + + + + Creates an annotation. CTRL to snap + Прави коментар. 'CTRL' да контролисано одскочи + + + + Draft_ToggleConstructionMode + + + Toggle construcion Mode + Промените стање режима изградње + + + + Toggles the Construction Mode for next objects. + Мења стање режима изградње за наредне објекте. + + + + Draft_ToggleContinueMode + + + Toggle Continue Mode + Toggle Continue Mode + + + + Toggles the Continue Mode for next commands. + Toggles the Continue Mode for next commands. + + + + Draft_ToggleDisplayMode + + + Toggle display mode + Мењај режим приказа + + + + Swaps display mode of selected objects between wireframe and flatlines + Swaps display mode of selected objects between wireframe and flatlines + + + + Draft_ToggleGrid + + + Toggle Grid + Toggle Grid + + + + Toggles the Draft grid on/off + Toggles the Draft grid on/off + + + + Draft_Trimex + + + Trimex + Trimex + + + + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts + + + + Draft_UndoLine + + + Undo last segment + Поништи последњи сегмент + + + + Undoes the last drawn segment of the line being drawn + Опозив последњег нацртаног сегмента линије која се црта + + + + Draft_Upgrade + + + Upgrade + Надоградња + + + + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces + + + + Draft_VisGroup + + + VisGroup + VisGroup + + + + Adds a VisGroup + Adds a VisGroup + + + + Draft_Wire + + + DWire + Д-жица + + + + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain + + + + Draft_WireToBSpline + + + Wire to BSpline + Wire to BSpline + + + + Converts between Wire and BSpline + Converts between Wire and BSpline + + + + Gui::Dialog::DlgSettingsDraft + + + General Draft Settings + Опште поставке Нацрта + + + + the default color for new objects + Подразумевана боја за нове објекте + + + + the default linewidth for new objects + Подразумевана дебљина линије за нове објекте + + + + the default color for snap symbols + Подразумевана боја симбола ужљебљења + + + + This is the default color for objects being drawn while in construction mode. + Ово је подразумевана боја за цртање објеката док сте у режиму изградње. + + + + This is the default group name for construction geometry + Ово је подразумевано име групе за геометрију изградње + + + + Construction + Конструкција + + + + check this if you want to use the color/linewidth from the toolbar as default + Означите ову опцију ако желите да користите боју /дебљину линије са траке са алаткама као подразумевано + + + + Save current color and linewidth across sessions + Сачувај тренутну боју и дебљину линије кроз више 'сесија' + + + + If this is checked, copy mode will be kept across command, otherwise commands will always start in no-copy mode + Ако је ово означено, режим копирања ће бити сачуван кроз команду, у супротном ће команде увек почети у режиму без копирања + + + + Global copy mode + Свеопшти режим копирања + + + + If this is checked, objects will appear as filled as default. Otherwise, they will appear as wireframe + Ако је ово означено подразумеваће се испуњеност објекта. У супротном, они ће се појавити као жичани костур + + + + Default working plane + Подразумевана радна површина + + + + None + Ниједан + + + + XY (Top) + 'XY' (врх) + + + + XZ (Front) + 'XZ' (предњи) + + + + YZ (Side) + 'YZ' (Са стране) + + + + The number of decimals in internal coordinates operations (for ex. 3 = 0.001) + Број децимала у унутрашњим координатама операције (нпр. 3 = 0.001). + + + + Default height for texts and dimensions + Подразумевана висина за текстове и димензије + + + + This is the default font name for all Draft texts and dimensions. +It can be a font name such as "Arial", a default style such as "sans", "serif" +or "mono", or a family such as "Arial,Helvetica,sans" or a name with a style +such as "Arial:Bold" + Ово је подразумевано име словописа за све нацрте текстова и димензије. То може да буде име фонта, као што су "Ариал", подразумевани стил као што је "Санс", "сериф", или "Моно", или породица, као што су "Ариал, Хелветица, санс" или име са стилом као што су " ариал: задебљано " + + + + Default template sheet + Подразумевани лист шаблона + + + + The default template to use when creating a new drawing sheet + Подразумевани предложак за коришћење приликом креирања новог листа цртежа + + + + Import style + Увeзи стил + + + + None (fastest) + Нема (најбржи) + + + + Use default color and linewidth + Користи подразумеване боје и ширину линија + + + + Original color and linewidth + Оригинална боја и ширина линије + + + + if this is checked, paper space objects will be imported too + if this is checked, paper space objects will be imported too + + + + if this is unchecked, texts/mtexts won't be imported + if this is unchecked, texts/mtexts won't be imported + + + + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. + + + + This is the method choosed for importing SVG object color into FreeCAD. + Ово је метода одабрана за увоз боје SVG објекта у FreeCAD. + + + + Check this if you want the areas (3D faces) to be imported too. + Активирајте ову опцију ако желите да се и области (3Д лица) увезу. + + + + Import OCA areas + Import OCA areas + + + + General settings + Општа подешавања + + + + Construction group name + Construction group name + + + + Tolerance + Толеранција + + + + This is the value used by functions that use a tolerance. +Values with differences below this value will be treated as same. + Ово је вредноcт коју кориcте функције које кориcте толеранцију. +Вредноcти које cе разликују иcпод те вредноcти ће бити третиране као једнаке. + + + + DXF format options + Опције DXF формата + + + + Check this if you want the non-named blocks (beginning with a *) to be imported too + Означите ово ако желите да неименовани блокови(почевши cа *) буду увезени + + + + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... + + + + Join geometry + Join geometry + + + + SVG format options + Поставке 'SVG' датотекa + + + + OCA format options + Поставке 'OCA' датотекa + + + + Alternate SVG Patterns location + Alternate SVG Patterns location + + + + Here you can specify a directory containing SVG files containing <pattern> definitions that can be added to the standard Draft hatch patterns + Here you can specify a directory containing SVG files containing <pattern> definitions that can be added to the standard Draft hatch patterns + + + + Draft interface mode + Draft interface mode + + + + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction + This is the UI mode in which the Draft module will work: Toolbar mode will place all Draft settings in a separate toolbar, while taskbar mode will use the FreeCAD Taskview system for all its user interaction + + + + Toolbar + Алатна трака + + + + Taskview + Преглед задатака + + + + Constrain mod + Режим ограничења + + + + The Constraining modifier key + The Constraining modifier key + + + + shift + SHIFT + + + + ctrl + CTRL + + + + alt + ALT + + + + Snap mod + Snap mod + + + + The snap modifier key + The snap modifier key + + + + Alt mod + Alt mod + + + + The alt modifier key + The alt modifier key + + + + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. + Normally, after copying objects, the copies get selected. If this option is checked, the base objects will be selected instead. + + + + Select base objects after copying + Одабери објекте темеља након копирања + + + + If checked, a grid will appear when drawing + If checked, a grid will appear when drawing + + + + Use grid + Use grid + + + + Grid spacing + Grid spacing + + + + The spacing between each grid line + The spacing between each grid line + + + + Main lines every + Main lines every + + + + Mainlines will be drawn thicker. Specify here how many squares between mainlines. + Mainlines will be drawn thicker. Specify here how many squares between mainlines. + + + + Internal precision level + Internal precision level + + + + Dimensions precision level + Dimensions precision level + + + + This is the orientation of the dimension texts when those dimensions are vertical. Default is left, which is the ISO standard. + This is the orientation of the dimension texts when those dimensions are vertical. Default is left, which is the ISO standard. + + + + Left (ISO standard) + Лево (ISO стандард) + + + + Right + Деcно + + + + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable + + + + Group layers into blocks + Групира слојеве у блокове + + + + If this is checked, all objects containing faces will be exported as 3d polyfaces + If this is checked, all objects containing faces will be exported as 3d polyfaces + + + + Export 3D objects as polyface meshes + Export 3D objects as polyface meshes + + + + If this is checked, the Draft workbench won't appear. Useful since all of the Draft tools are also in the Arch workbench. + If this is checked, the Draft workbench won't appear. Useful since all of the Draft tools are also in the Arch workbench. + + + + Hide Draft workbench + Hide Draft workbench + + + + If checked, the Snap toolbar will be shown whenever you use snapping + If checked, the Snap toolbar will be shown whenever you use snapping + + + + Show Draft Snap toolbar + Show Draft Snap toolbar + + + + Hide Draft snap toolbar after use + Hide Draft snap toolbar after use + + + + if checked, a widget indicating the current working plane orientation appears during drawing operations + if checked, a widget indicating the current working plane orientation appears during drawing operations + + + + Show Working Plane tracker + Show Working Plane tracker + + + + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command + + + + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document + + + + Use standard font size for texts + Корист стандардну величину фонта за текст + + + + If this is checked, hatches will be converted into simple wires + If this is checked, hatches will be converted into simple wires + + + + Import hatch boundaries as wires + Import hatch boundaries as wires + + + + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width + + + + Render polylines with width + Render polylines with width + + + + Style of SVG file to write when exporting a Sketch. + Style of SVG file to write when exporting a Sketch. + + + + Translated (for print & display) + Преведено (за штампање и приказивање) + + + + Raw (for CAM) + Raw (for CAM) + + + + When exporting SVG views, make all white linework appear in black, for better readability against white backgrounds + When exporting SVG views, make all white linework appear in black, for better readability against white backgrounds + + + + Translate white line color to black + Преведи боју беле линије у црну + + + + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. + + + + Use Part Primitives when available + Use Part Primitives when available + + + + Snapping + Snapping + + + + If this is checked, snapping is activated without the need to press the snap mod key + If this is checked, snapping is activated without the need to press the snap mod key + + + + Always snap (disable snap mod) + Always snap (disable snap mod) + + + + Construction geometry + Construction geometry + + + + Construction geometry color + Construction geometry color + + + + Import + Увези + + + + texts and dimensions + текcт и димензије + + + + points + тачке + + + + layouts + layouts + + + + *blocks + *блокови + + + + If this is checked, the exported objects will be projected to reflect the current view direction + If this is checked, the exported objects will be projected to reflect the current view direction + + + + Project exported objects along current view direction + Project exported objects along current view direction + + + + Ellipse export is badly supported. Use this to export them as polylines instead. + Ellipse export is badly supported. Use this to export them as polylines instead. + + + + DWG format options + DWG format options + + + + Path to Teigha File Converter + Path to Teigha File Converter + + + + The path to your Teigha File Converter executable + The path to your Teigha File Converter executable + + + + Visual settings + Визуелна подешавања + + + + Visual Settings + Визуелна Подешавања + + + + Default line color + Подразумевана боја линије + + + + Default line width + Подразумевана ширина линије + + + + Snap symbols style + Snap symbols style + + + + Draft classic style + Draft classic style + + + + Bitsnpieces style + Bitsnpieces style + + + + Color + Боја + + + + Hatch patterns resolution + Hatch patterns resolution + + + + Grid + Мрежа + + + + Always show the grid + Увек приказуј мрежу + + + + Texts and dimensions + Текст и димензије + + + + Texts + Текст + + + + font + фонт + + + + Internal font + Интерни фонт + + + + size + величина + + + + Dimensions arrows + Dimensions arrows + + + + style + cтил + + + + Dot + Тачка + + + + Circle + Круг + + + + Arrow + Cтрелица + + + + The default size of arrows + Подразумевана величина cтрелица + + + + The default size of dimensions extension lines + The default size of dimensions extension lines + + + + Dimensions text + Димензије текcта + + + + orientation + оријентација + + + + spacing + размак + + + + The space between the dimension line and the dimension text + The space between the dimension line and the dimension text + + + + Default ShapeString Font File + Default ShapeString Font File + + + + Select a font file + Одабери датотеку фонта + + + + Fill objects with faces whenever possible + Fill objects with faces whenever possible + + + + Create + Stvori + + + + simple Part shapes + simple Part shapes + + + + If this is checked, parametric Draft objects will be created whenever possible + If this is checked, parametric Draft objects will be created whenever possible + + + + Draft objects + Draft objects + + + + If this is checked, sketches will be created whenever possible + If this is checked, sketches will be created whenever possible + + + + Sketches + Cкице + + + + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. + + + + Get original colors from the DXF file + Get original colors from the DXF file + + + + Treat ellipses and splines as polylines + Treat ellipses and splines as polylines + + + + Max Spline Segment: + Max Spline Segment: + + + + Export style + Export style + + + + Snapping settings + Snapping settings + + + + Show the unit suffix in dimensions + Show the unit suffix in dimensions + + + + DXF / DWG + DXF / DWG + + + + Automatic update + Аутоматcко оcвежавање + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + + + + Allow FreeCAD to automatically download and update the DXF libraries + Allow FreeCAD to automatically download and update the DXF libraries + + + + If this is checked, only standard Part objects will be created (fastest) + If this is checked, only standard Part objects will be created (fastest) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + If this is checked, DXF layers will be imported as Draft VisGroups + + + + Use VisGroups + Use VisGroups + + + + mm + мм + + + + SVG / OCA + SVG / OCA + + + + Grid size + Grid size + + + + the number of horizontal or vertical lines of the grid + the number of horizontal or vertical lines of the grid + + + + lines + линије + + + + Dimensions + Димензије + + + + display mode + display mode + + + + text above (2D) + text above (2D) + + + + text inside (3D) + text inside (3D) + + + + extension lines size + extension lines size + + + + Drawing views + Drawing views + + + + Dashed line definition + Dashed line definition + + + + A SVG linestyle definition + A SVG linestyle definition + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + Dashdot line definition + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Dotted line definition + + + + 0.02,0.02 + 0.02,0.02 + + + + Workbench + + + Draft Snap + Draft Snap + + + + Draft creation tools + Draft creation tools + + + + Draft modification tools + Draft modification tools + + + + draft + + + Draft Command Bar + Draft Command Bar + + + + active command: + активне команде: + + + + None + Ниједан + + + + Active Draft command + Активна команда нацрта + + + + X coordinate of next point + 'X' координата следеће тачке + + + + X + 'X' + + + + Y + 'Y' + + + + Z + 'Z' + + + + Y coordinate of next point + 'Y' координата следеће тачке + + + + Z coordinate of next point + 'Z' координата следеће тачке + + + + Radius + Полупречник + + + + Radius of Circle + Полупречник круга + + + + &Relative + &Релативно + + + + Coordinates relative to last point or absolute (SPACE) + Координате у односу на последњу тачку или апсолутна (размак) + + + + F&illed + Ис&пуњено + + + + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) + + + + &Finish + &Заврши + + + + Finishes the current drawing or editing operation (F) + Завршава актуелни цртеж или покренуту измену (Ф) + + + + If checked, command will not finish until you press the command button again + If checked, command will not finish until you press the command button again + + + + If checked, an OCC-style offset will be performed instead of the classic offset + If checked, an OCC-style offset will be performed instead of the classic offset + + + + &OCC-style offset + &OCC-style offset + + + + Add points to the current object + Додај тачке актуелном објекту + + + + Remove points from the current object + Обриши тачке из актуелног објекта + + + + Make Bezier node sharp + Make Bezier node sharp + + + + Make Bezier node tangent + Make Bezier node tangent + + + + Make Bezier node symmetric + Make Bezier node symmetric + + + + &Undo + Врати + + + + Undo the last segment (CTRL+Z) + Поништи последњи сегмент (CTRL+Z) + + + + &Close + Zatvori + + + + Finishes and closes the current line (C) + Завршава и затвара тренутну линију (C) + + + + &Wipe + &Обриши + + + + Wipes the existing segments of this line and starts again from the last point (W) + Брише постојеће сегменте ове линије и почиње поново од задње тачке (W) + + + + Number of sides + Број страна + + + + Offset + Померај + + + + XY + 'XY' + + + + Select XY plane + Изаберите 'XY' равaн + + + + XZ + 'XZ' + + + + Select XZ plane + Изаберите 'XZ' раван + + + + YZ + 'YZ' + + + + Select YZ plane + Изаберите 'YZ' равaн + + + + View + Приказ + + + + Select plane perpendicular to the current view + Изаберите раван нормалну у односу на тренутни приказ + + + + Do not project points to a drawing plane + Немојте пројектовати тачке на раван цртања + + + + &Copy + &Умножи + + + + If checked, objects will be copied instead of moved (C) + Ако је потврђен избор, објекти ће бити копирани уместо премештени (C) + + + + Text string to draw + Text string to draw + + + + String + Нит + + + + Height of text + Виcина текcта + + + + Height + Висина + + + + Intercharacter spacing + Intercharacter spacing + + + + Tracking + Праћење + + + + Full path to font file: + Цео пут до датотеке фонта: + + + + Open a FileChooser for font file + Open a FileChooser for font file + + + + Set/unset a working plane + Set/unset a working plane + + + + Line Color + Боја линије + + + + Face Color + Боја лица + + + + Line Width + Ширина линије + + + + Font Size + Величина слова + + + + Apply to selected objects + Примени на изабране објекте + + + + Toggles Construction Mode + Укључује режим изградње + + + + Select Plane + Изаберите раван + + + + Line + Линија + + + + DWire + Д-жица + + + + Circle + Круг + + + + Center X + Центар 'X' + + + + Arc + Лук + + + + Point + Тачка + + + + Distance + Distance + + + + Trim + Trim + + + + Pick Object + Изаберите објекат + + + + Edit + Измени + + + + Global X + Global X + + + + Global Y + Global Y + + + + Global Z + Global Z + + + + Local X + Local X + + + + Local Y + Local Y + + + + Local Z + Local Z + + + + Invalid Size value. Using 200.0. + Invalid Size value. Using 200.0. + + + + Invalid Tracking value. Using 0. + Invalid Tracking value. Using 0. + + + + Please enter a text string. + Please enter a text string. + + + + Select a Font file + Одабери датотеку Фонта + + + + Please enter a font file. + Молим, унеcите датотеку фонта. + + + + Draft.makeBSpline: not enough points + + Draft.makeBSpline: not enough points + + + + + Draft.makeBSpline: Equal endpoints forced Closed + + Draft.makeBSpline: Equal endpoints forced Closed + + + + + Draft.makeBSpline: Invalid pointslist + + Draft.makeBSpline: Invalid pointslist + + + + + Found groups: closing each open object inside + + Found groups: closing each open object inside + + + + + Found mesh(es): turning into Part shapes + + Found mesh(es): turning into Part shapes + + + + + Found 1 solidificable object: solidifying it + + Found 1 solidificable object: solidifying it + + + + + Found 2 objects: fusing them + + Пронађено 2 предмета: спајам их + + + + Found 1 non-parametric objects: draftifying it + + Found 1 non-parametric objects: draftifying it + + + + + Found 1 open wire: closing it + + Found 1 open wire: closing it + + + + + Found several open wires: joining them + + Found several open wires: joining them + + + + + Found several edges: wiring them + + Found several edges: wiring them + + + + + Unable to upgrade these objects. + + Unable to upgrade these objects. + + + + + Found 1 block: exploding it + + Found 1 block: exploding it + + + + + Found 1 parametric object: breaking its dependencies + + Found 1 parametric object: breaking its dependencies + + + + + Found 2 objects: subtracting them + + Found 2 objects: subtracting them + + + + + Found several faces: splitting them + + Found several faces: splitting them + + + + + Found several objects: subtracting them from the first one + + Found several objects: subtracting them from the first one + + + + + Found 1 face: extracting its wires + + Found 1 face: extracting its wires + + + + + Found only wires: extracting their edges + + Found only wires: extracting their edges + + + + + No more downgrade possible + + Даљње умањивање није могуће + + + + + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. + + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. + + + + + Pick a face to define the drawing plane + + Избор лица за дефинисање равни цртежа + + + + Pick first point: + + Изаберите прву тачку: + + + + Create Line + Нацртај линију + + + + Create DWire + Направи Д-жицу + + + + DWire has been closed + + Д-жица је затворена + + + + + Last point has been removed + + Задња тачка је уклоњена + + + + + Pick next point: + + Изаберите следећу тачку: + + + + Pick next point, or (F)inish or (C)lose: + + Изаберите следећу тачку, или (F)заврши или (C)затвори: + + + + BSpline + BSpline + + + + Spline has been closed + + Spline has been closed + + + + + Create BSpline + Креирај BSpline + + + + BezCurve + BezCurve + + + + Bezier curve has been closed + + Bezier curve has been closed + + + + + Create BezCurve + Create BezCurve + + + + Rectangle + Правоугаоник + + + + Create Plane + Направи Раван + + + + Create Rectangle + Креирај ректангл + + + + Pick opposite point: + + Изаберите супротну тачку: + + + + Pick center point: + + Изаберите централну тачку: + + + + Pick radius: + + Изаберите полупречник: + + + + + Pick start angle: + + Изаберите Почетни угао: + + + + Pick aperture: + + Одабери величину отвора: + + + + + Create Circle + Нацртај круг + + + + Create Arc + Креирај лук + + + + Start Angle + Почетни угао + + + + Aperture + Отвор + + + + Aperture angle: + + Угао отвора: + + + + + Polygon + Многоугао + + + + Create Polygon + Нацртај многоугао + + + + Ellipse + Елипса + + + + Create Ellipse + Направ Елипcу + + + + Text + Текст + + + + Pick location point: + + Одаберите локацију тачке: + + + + Create Text + Направи текст + + + + Dimension + Димензија + + + + Create Dimension + Одреди димензије + + + + Edges don't intersect! + + Ивице се не секу! + + + + ShapeString + ShapeString + + + + Pick ShapeString location point: + + Pick ShapeString location point: + + + + + Create ShapeString + Create ShapeString + + + + Move + Премести + + + + Select an object to move + + Изаберите објекат за померање + + + + Pick start point: + + Изаберите почетну тачку: + + + + Copy + Умножи + + + + Pick end point: + + Изаберите крајњу тачку: + + + + Change Style + Промени Стил + + + + Select an object to rotate + + Изаберите објекат за ротирање + + + + Pick rotation center: + + Изаберите центар ротације: + + + + Rotate + Ротирати + + + + Pick base angle: + + Избор основни угао: + + + + Pick rotation angle: + + Изаберите угао ротације: + + + + Select an object to offset + + Select an object to offset + + + + + Offset only works on one object at a time + + Offset only works on one object at a time + + + + + Cannot offset this object type + + Cannot offset this object type + + + + + Pick distance: + + Изаберите раздаљину: + + + + Select an object to upgrade + + Изаберите објекат за надоградњу + + + + Upgrade + Надоградња + + + + Downgrade + умањити + + + + Scale + увеличај/умањи + + + + Select an object to scale + + Изаберите објекат за промену размере + + + + Pick base point: + + Изабери основну тачку: + + + + Pick scale factor: + + Изаберите фактор размере: + + + + Select an object to project + + Select an object to project + + + + + Select a Draft object to edit + + Select a Draft object to edit + + + + + This object type is not editable + + Овај тип објекта није могуће уређивати + + + + + Active object must have more than two points/nodes + + Активни објекат мора да има више од две тачке/чвора + + + + Selection is not a Knot + + Selection is not a Knot + + + + + Endpoint of BezCurve can't be smoothed + + Endpoint of BezCurve can't be smoothed + + + + + Select an object to convert + + Select an object to convert + + + + + Select an object to array + + Select an object to array + + + + + Please select base and path objects + + Please select base and path objects + + + + + Create Point + Нацртај тачку + + + + Select an object to clone + + Select an object to clone + + + + + Select face(s) on existing object(s) + + Select face(s) on existing object(s) + + + + + Teigha File Converter not found, DWG support is disabled. + + Teigha File Converter not found, DWG support is disabled. + + + + + &Draft + &Нацрт + + + + Utilities + Utilities + + + + Wire tools + Алати за Жицу + + + + Snapping + Snapping + + + + Found 1 multi-solids compound: exploding it + + Found 1 multi-solids compound: exploding it + + + + + Sides + Sides + + + + BSplines and Bezier curves are not supported by this tool + BSplines and Bezier curves are not supported by this tool + + + + The given object is not planar and cannot be converted into a sketch. + The given object is not planar and cannot be converted into a sketch. + + + + Found several objects: creating a shell + + Found several objects: creating a shell + + + + + Found several coplanar objects or faces: creating one face + + Found several coplanar objects or faces: creating one face + + + + + Found 1 linear object: converting to line + + Found 1 linear object: converting to line + + + + + Found 1 closed sketch object: creating a face from it + + Found 1 closed sketch object: creating a face from it + + + + + Found closed wires: creating faces + + Found closed wires: creating faces + + + + + Found several non-treatable objects: creating compound + + Found several non-treatable objects: creating compound + + + + + Length + Дужина + + + + Angle + Угао + + + + Length of current segment + Length of current segment + + + + Angle of current segment + Angle of current segment + + + + Check this to lock the current angle (l) + Check this to lock the current angle (l) + + + + Con&tinue + Con&tinue + + + + &Select edge + &Select edge + + + + Selects an existing edge to be measured by this dimension (E) + Selects an existing edge to be measured by this dimension (E) + + + + Auto + Auto + + + + Sorry, offset of Bezier curves is currently still not supported + + Sorry, offset of Bezier curves is currently still not supported + + + + + Convert to Sketch + Convert to Sketch + + + + Convert to Draft + Convert to Draft + + + + Convert + Convert + + + + Array + Поредак + + + + Select object(s) to trim/extend + + Select object(s) to trim/extend + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + Unable to trim these objects, only Draft wires and arcs are supported + + + + + Unable to trim these objects, too many wires + + Unable to trim these objects, too many wires + + + + + These objects don't intersect + + These objects don't intersect + + + + + Too many intersection points + + Too many intersection points + + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + + + diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm b/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm index 1b29adca3b..c9c47818f8 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm and b/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts index ee196de25b..ec393e72f4 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts @@ -1,15 +1,29 @@ + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + + Draft_AddPoint - + Add Point Lägg till punkt - + Adds a point to an existing wire/bspline Lägger till en punkt i en befintlig tråd/bspline @@ -17,12 +31,12 @@ Draft_AddToGroup - + Add to group... Lägg till i grupp ... - + Adds the selected object(s) to an existing group Lägger till de markerade objekten till en befintlig grupp @@ -30,12 +44,12 @@ Draft_ApplyStyle - + Apply Current Style Tillämpa aktuell stil - + Applies current line width and color to selected objects Applicerar nuvarande linjebredd och -färg till valda objekt @@ -43,12 +57,12 @@ Draft_Arc - + Arc Cirkelbåge - + Creates an arc. CTRL to snap, SHIFT to constrain Skapar en cirkelbåge. CTRL för att snäppa, SKIFT för att begränsa @@ -56,12 +70,12 @@ Draft_Array - + Array Matris - + Creates a polar or rectangular array from a selected object Skapar en polar eller rektangulär matris från ett markerat objekt @@ -69,12 +83,12 @@ Draft_BSpline - + B-Spline B-spline - + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain Skapar en multi-punkts b-spline. CTRL för att snäppa, SKIFT för att begränsa @@ -89,18 +103,18 @@ Creates a Bezier curve. CTRL to snap, SHIFT to constrain - Creates a Bezier curve. CTRL to snap, SHIFT to constrain + Skapar en Bezier-kurva. CTRL för att fästa, SHIFT för att villkora Draft_Circle - + Circle Cirkel - + Creates a circle. CTRL to snap, ALT to select tangent objects Skapar en cirkel. CTRL för att snäppa, ALT för att välja tangentobjekt @@ -108,12 +122,12 @@ Draft_Clone - + Clone Klon - + Clones the selected object(s) Klonar ett eller flera valda objekt @@ -121,12 +135,12 @@ Draft_CloseLine - + Close Line Stäng linje - + Closes the line being drawn Stänger den linje som ritas @@ -134,12 +148,12 @@ Draft_DelPoint - + Remove Point Ta bort punkt - + Removes a point from an existing wire or bspline Tar bort en punkt från en befintlig tråd eller bspline @@ -147,12 +161,12 @@ Draft_Dimension - + Dimension Dimension - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Skapar en dimension. CTRL för att snäppa, SKIFT för att begränsa, ALT för att välja ett segment @@ -160,12 +174,12 @@ Draft_Downgrade - + Downgrade Nedgradera - + Explodes the selected objects into simpler objects, or subtract faces Förändrar de valda objekten till enklare objekt, eller subtraherar ytor @@ -173,7 +187,7 @@ Draft_Draft2Sketch - + Draft to Sketch Rita till skiss @@ -181,12 +195,12 @@ Draft_Drawing - + Drawing Ritning - + Puts the selected objects on a Drawing sheet. Placerar det valda objektet på ett ritningsark. @@ -194,12 +208,12 @@ Draft_Edit - + Edit Redigera - + Edits the active object Redigerar det aktiva objektet @@ -207,25 +221,25 @@ Draft_Ellipse - + Ellipse Ellips - + Creates an ellipse. CTRL to snap - Creates an ellipse. CTRL to snap + Skapar en ellips. CTRL för att fästa Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) Creates a facebinder object from selected face(s) @@ -233,12 +247,12 @@ Draft_FinishLine - + Finish line Avsluta linje - + Finishes a line without closing it Avslutar en linje utan att stänga den @@ -246,12 +260,12 @@ Draft_FlipDimension - + Flip Dimension - Flip Dimension + Växla riktning på dimension - + Flip the normal direction of a dimension Flip the normal direction of a dimension @@ -259,38 +273,25 @@ Draft_Heal - + Heal Heal - - Heal faultly Draft objects saved from an earlier FreeCAD version - Heal faultly Draft objects saved from an earlier FreeCAD version - - - - Draft_Layer - - - Layer - Layer - - - - Adds a layer - Adds a layer + + Heal faulty Draft objects saved from an earlier FreeCAD version + Heal faulty Draft objects saved from an earlier FreeCAD version Draft_Line - + Line Linje - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Skapar en 2-punkts linje. CTRL för att snäppa, SKIFT för att begränsa @@ -298,12 +299,12 @@ Draft_Move - + Move Flytta - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy Flyttar de valda objekten mellan 2 punkter. CTRL för att snäppa, SKIFT för att begränsa, ALT för att kopiera @@ -311,12 +312,12 @@ Draft_Offset - + Offset Offset - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Skapar en offset till det aktiva objektet. CTRL för att snäppa, SKIFT för att begränsa, ALT för att kopiera @@ -324,25 +325,25 @@ Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. - Creates copies of a selected object along a selected path. + Skapar kopior av ett markerat objekt utmed vald bana. Draft_Point - + Point Punkt - + Creates a point object Skapar punktobjekt @@ -350,12 +351,12 @@ Draft_Polygon - + Polygon Polygon - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Skapar en regelbunden månghörning. CTRL för att snäppa, SKIFT för att begränsa @@ -363,12 +364,12 @@ Draft_Rectangle - + Rectangle Rektangel - + Creates a 2-point rectangle. CTRL to snap Skapar en 2-punkts rektangel. CTRL för att snäppa @@ -376,12 +377,12 @@ Draft_Rotate - + Rotate Rotera - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Roterar de valda objekten. CTRL för att snäppa, SKIFT för att begränsa, ALT skapar en kopia @@ -389,12 +390,12 @@ Draft_Scale - + Scale Skala - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Skalar de valda objekten från en baspunkt.CTRL för att snäppa, SKIFT för att begränsa, ALT för att kopiera @@ -402,12 +403,12 @@ Draft_SelectGroup - + Select group Välj grupp - + Selects all objects with the same parents as this group Markerar alla objekt med samma föräldrar som denna grupp @@ -415,12 +416,12 @@ Draft_SelectPlane - + SelectPlane Välj plan - + Select a working plane for geometry creation Väljer ett arbetsplan för skapande av geometri @@ -428,17 +429,17 @@ Draft_Shape2DView - + Shape 2D view 2D form vy - + Creates Shape 2D views of selected objects Skapar form 2D vyer för markerade objekt - + Convert bidirectionally between Draft and Sketch objects Konvertera bidirektionellt mellan ritning och skiss objekt @@ -446,12 +447,12 @@ Draft_ShapeString - + Shape from text... - Shape from text... + Form från text... - + Creates text string in shapes. Creates text string in shapes. @@ -459,12 +460,12 @@ Draft_ShowSnapBar - + Show Snap Bar Visa snäppfält - + Shows Draft snap toolbar Visar snäpp-verktygsfältför ritning @@ -472,38 +473,38 @@ Draft_Snap_Angle - + Angles - Angles + Vinklar - + Snaps to 45 and 90 degrees points on arcs and circles - Snaps to 45 and 90 degrees points on arcs and circles + Fäst mot 45- och 90-graderspunkter på bågar och cirklar Draft_Snap_Center - + Center - Center + Mitten - + Snaps to center of circles and arcs - Snaps to center of circles and arcs + Fäst mot mitten av cirklar och bågar Draft_Snap_Dimensions - + Dimensions Dimensioner - + Shows temporary dimensions when snapping to Arch objects Shows temporary dimensions when snapping to Arch objects @@ -511,155 +512,155 @@ Draft_Snap_Endpoint - + Endpoint - Endpoint + Ändpunkt - + Snaps to endpoints of edges - Snaps to endpoints of edges + Fäst mot kanters ändpunkter Draft_Snap_Extension - + Extension - Extension + Förlängning - + Snaps to extension of edges - Snaps to extension of edges + Fäst mot kanters förlängning Draft_Snap_Grid - + Grid - Grid + Rutnät - + Snaps to grid points - Snaps to grid points + Fäst mot rutnät Draft_Snap_Intersection - + Intersection Skärning - + Snaps to edges intersections - Snaps to edges intersections + Fäst mot kanters skärningspunkter Draft_Snap_Lock - + Toggle On/Off - Toggle On/Off + Växla på/av - + Activates/deactivates all snap tools at once - Activates/deactivates all snap tools at once + Aktiverar/inaktiverar alla fästverktyg samtidigt Draft_Snap_Midpoint - + Midpoint - Midpoint + Mittpunkt - + Snaps to midpoints of edges - Snaps to midpoints of edges + Fäst mot kanters mittpunkt Draft_Snap_Near - + Nearest - Nearest + Närmaste - + Snaps to nearest point on edges - Snaps to nearest point on edges + Fäst mot närmaste punkt på kanter Draft_Snap_Ortho - + Ortho - Ortho + Vinkelrät - + Snaps to orthogonal and 45 degrees directions - Snaps to orthogonal and 45 degrees directions + Fäst mot vinkelräta och 45 graders riktningar Draft_Snap_Parallel - + Parallel - Parallel + Parallell - + Snaps to parallel directions of edges - Snaps to parallel directions of edges + Fäst mot kanters parallellriktningar Draft_Snap_Perpendicular - + Perpendicular - Perpendicular + Vinkelrätt - + Snaps to perpendicular points on edges - Snaps to perpendicular points on edges + Fäst mot kanters vinkelräta punkter Draft_Snap_WorkingPlane - + Working Plane - Working Plane + Arbetsyta - + Restricts the snapped point to the current working plane - Restricts the snapped point to the current working plane + Begränsar fästpunkter till den aktuella arbetsytan Draft_Text - + Text Text - + Creates an annotation. CTRL to snap Skapar en annotering. CTRL för att snäppa @@ -667,12 +668,12 @@ Draft_ToggleConstructionMode - + Toggle construcion Mode Växla konstruktionsläge - + Toggles the Construction Mode for next objects. Växlar till konstruktionsläge för efterkommande objekt. @@ -680,12 +681,12 @@ Draft_ToggleContinueMode - + Toggle Continue Mode - Toggle Continue Mode + Växla kontinuerligt läge - + Toggles the Continue Mode for next commands. Växlar Fortsättläge för nästa kommandon. @@ -693,12 +694,12 @@ Draft_ToggleDisplayMode - + Toggle display mode Växla visningsläge - + Swaps display mode of selected objects between wireframe and flatlines Växlar visningsläget för de valda objekten mellan trådar och platta linjer @@ -706,25 +707,25 @@ Draft_ToggleGrid - + Toggle Grid Tänd/släck rutnät - - Toggles the Draft gid on/off - Växlar ritningsrutnätet på/av + + Toggles the Draft grid on/off + Toggles the Draft grid on/off Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Trimmar eller förlänger det markerade objektet eller extruderar enstaka ytor. CTRL snäpper, SKIFT begränsar till nuvarande segment eller till normal, ALT inverterar @@ -732,12 +733,12 @@ Draft_UndoLine - + Undo last segment Ångra sista segmentet - + Undoes the last drawn segment of the line being drawn Ångrar det senast ritade segmentet på den linje som ritas @@ -745,25 +746,38 @@ Draft_Upgrade - + Upgrade Uppgradera - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces Förenar de valda objekten till ett objekt, eller konverterar stängda linjer till fyllda ytor, eller förenar ytor + + Draft_VisGroup + + + VisGroup + VisGroup + + + + Adds a VisGroup + Adds a VisGroup + + Draft_Wire - + DWire DWire - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain Skapar en flerpunkts DraftWire (DWire). CTRL för att snäppa, SKIFT för att begränsa @@ -771,12 +785,12 @@ Draft_WireToBSpline - + Wire to BSpline Tråd till BSpline - + Converts between Wire and BSpline Konverterar mellan tråd och BSpline @@ -804,17 +818,17 @@ standardfärg för snäppsymboler - + This is the default color for objects being drawn while in construction mode. Detta är standardfärgen för objekt som ritats i konstruktionsläget. - + This is the default group name for construction geometry Detta är standardgruppnamnet för konstruktionsgeometri - + Construction Konstruktion @@ -920,17 +934,17 @@ som "Arial:Bold" Original färg och linjebredd - + if this is checked, paper space objects will be imported too om denna är ikryssad så kommer pappersrymd objekt att importeras också - + if this is unchecked, texts/mtexts won't be imported Om detta inte är ikryssad, så kommer texter/mtexts inte importeras - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. Vid export av splines till DXF, så omvandlas de till polylines. Detta värde är den maximala längden för varje polyline segment. Om 0, så behandlas hela splinen som ett rakt segment. @@ -955,7 +969,7 @@ som "Arial:Bold" Allmänna inställningar - + Construction group name Konstruktion gruppnamn @@ -971,22 +985,22 @@ Values with differences below this value will be treated as same. Detta är det värde som används av funktioner som använder en tolerans. Värden med skillnader under detta värde kommer att behandlas som samma. - + DXF format options DXF format alternativ - + Check this if you want the non-named blocks (beginning with a *) to be imported too Markera här om du vill att icke-namngivna block (börjar med *) ska importeras också - + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... Om markerat, så kommer freecad att försöka förena sammanfallande objekt till trådar. Akta dig, detta kan ta en stund ... - + Join geometry Förena geometri @@ -1086,32 +1100,32 @@ Values with differences below this value will be treated as same. Välj grundobjekt efter kopiering - + If checked, a grid will appear when drawing Om markerat, så kommer ett rutnät att synas under ritning - + Use grid Använd rutnät - + Grid spacing Rutnätsavstånd - + The spacing between each grid line Avståndet mellan varje rutnätslinje - + Main lines every Huvudlinjer varje - + Mainlines will be drawn thicker. Specify here how many squares between mainlines. Huvudlinjer kommer att ritas tjockare. Ange här hur många rutor mellan huvudlinjer. @@ -1141,22 +1155,22 @@ Values with differences below this value will be treated as same. Höger - + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable Om detta är markerat, så kommer objekt från samma lager att förenas till skissblock, vilket ger snabbare skärmuppdatering, men reducerar redigeringsförmågan - + Group layers into blocks Gruppera lager i block - + If this is checked, all objects containing faces will be exported as 3d polyfaces Om detta är markerat, så kommer alla objekt som innehåller ytor att exporteras som 3D-polyfaces - + Export 3D objects as polyface meshes Exportera 3D-objekt som polyface nät @@ -1196,37 +1210,37 @@ Values with differences below this value will be treated as same. Visa arbetsplan tracker - + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command Om markerat, så kommer rit rutnätet alltid vara synligt när ritarbetsbänken är aktiv, annars bara när du använder ett kommando - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document Om detta är markerat, så kommer importerade texter att få standard ritnings-textstorlek, i stället för den storlek som de har i DXF-dokumentet - + Use standard font size for texts Använd standardteckensnittsstorlek för texter - + If this is checked, hatches will be converted into simple wires Om detta är markerat, så kommer tvärsnittsmarkeringar att konverteras till enkla trådar - + Import hatch boundaries as wires Importera tvärsnittsmarkeringsgränser som trådar - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width Om denna är markerad, så kommer de polylinjer som har en definierad bredd att renderas som stängda trådar med korrekt bredd - + Render polylines with width Rendera polylinjer med bredd @@ -1278,82 +1292,82 @@ Values with differences below this value will be treated as same. Always snap (disable snap mod) - Always snap (disable snap mod) + Fäst alltid (inaktivera fästläge) - + Construction geometry Konstruktionsgeometri - + Construction geometry color - Construction geometry color + Konstruktionsgeometrifärg - + Import - Import - - - - texts and dimensions - texts and dimensions - - - - points - points + Importera - layouts - layouts + texts and dimensions + texter och dimensioner - + + points + punkter + + + + layouts + layouter + + + *blocks *blocks - + If this is checked, the exported objects will be projected to reflect the current view direction If this is checked, the exported objects will be projected to reflect the current view direction - + Project exported objects along current view direction Project exported objects along current view direction - + Ellipse export is badly supported. Use this to export them as polylines instead. Ellipse export is badly supported. Use this to export them as polylines instead. - + DWG format options - DWG format options + DWG formatalternativ - + Path to Teigha File Converter Path to Teigha File Converter - + The path to your Teigha File Converter executable The path to your Teigha File Converter executable Visual settings - Visual settings + Visuella inställningar Visual Settings - Visual Settings + Visuella inställningar @@ -1363,7 +1377,7 @@ Values with differences below this value will be treated as same. Default line width - Default line width + Standardlinjebredd @@ -1383,7 +1397,7 @@ Values with differences below this value will be treated as same. Color - Color + Färg @@ -1393,107 +1407,92 @@ Values with differences below this value will be treated as same. Grid - Grid + Rutnät - + Always show the grid - Always show the grid + Visa alltid rutnätet Texts and dimensions - Texts and dimensions + Texter och dimensioner Texts - Texts + Texter font - font + teckensnitt Internal font - Internal font + Internt teckensnitt size - size + storlek - + Dimensions arrows - Dimensions arrows + Dimensionspilar - + style - style + stil - + Dot - Dot + Punkt - + Circle Cirkel - - - Arrow - Arrow - - - - The default size of arrows - The default size of arrows - - - - Dimensions lines - Dimensions lines - - - - text above - text above - - text inside - text inside + Arrow + Pil + The default size of arrows + Standardstorleken på pilar + + + The default size of dimensions extension lines - The default size of dimensions extension lines + Standardstorleken för dimensioners förlängningslinjer Dimensions text - Dimensions text + Dimensionstext orientation - orientation + orientering spacing - spacing + mellanrum The space between the dimension line and the dimension text - The space between the dimension line and the dimension text + Utrymmet mellan dimensionsraden och dimensionstexten @@ -1503,7 +1502,7 @@ Values with differences below this value will be treated as same. Select a font file - Select a font file + Välj en teckensnittsfil @@ -1511,80 +1510,55 @@ Values with differences below this value will be treated as same. Fill objects with faces whenever possible - - DXF / DWG options - DXF / DWG options - - - + Create Skapa - - If thi sis checked, only standard Part objects will be created (fastest) - If thi sis checked, only standard Part objects will be created (fastest) - - - + simple Part shapes simple Part shapes - + If this is checked, parametric Draft objects will be created whenever possible If this is checked, parametric Draft objects will be created whenever possible - + Draft objects Draft objects - + If this is checked, sketches will be created whenever possible If this is checked, sketches will be created whenever possible - + Sketches Sketches - + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. - + Get original colors from the DXF file Get original colors from the DXF file - - If this is checked, DXF layers will be imported as Draft layers - If this is checked, DXF layers will be imported as Draft layers - - - - Use Draft Layers - Use Draft Layers - - - + Treat ellipses and splines as polylines Treat ellipses and splines as polylines - + Max Spline Segment: Max Spline Segment: - - - SVG / OCA options - SVG / OCA options - Export style @@ -1600,21 +1574,146 @@ Values with differences below this value will be treated as same. Show the unit suffix in dimensions Show the unit suffix in dimensions + + + DXF / DWG + DXF / DWG + + + + Automatic update + Automatisk uppdatering + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + + + + Allow FreeCAD to automatically download and update the DXF libraries + Allow FreeCAD to automatically download and update the DXF libraries + + + + If this is checked, only standard Part objects will be created (fastest) + If this is checked, only standard Part objects will be created (fastest) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + If this is checked, DXF layers will be imported as Draft VisGroups + + + + Use VisGroups + Use VisGroups + + + + mm + mm + + + + SVG / OCA + SVG / OCA + + + + Grid size + Rutnätsstorlek + + + + the number of horizontal or vertical lines of the grid + the number of horizontal or vertical lines of the grid + + + + lines + linjer + + + + Dimensions + Dimensioner + + + + display mode + display mode + + + + text above (2D) + text ovanför (2D) + + + + text inside (3D) + texten inuti (3D) + + + + extension lines size + extension lines size + + + + Drawing views + Drawing views + + + + Dashed line definition + Dashed line definition + + + + A SVG linestyle definition + A SVG linestyle definition + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + Dashdot line definition + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Dotted line definition + + + + 0.02,0.02 + 0.02,0.02 + Workbench - + Draft Snap Draft Snap - + Draft creation tools Verktyg för att skapa skisser - + Draft modification tools Modifieringsverktyg till skisser @@ -1622,641 +1721,603 @@ Values with differences below this value will be treated as same. draft - + Draft Command Bar Draft Command Bar - + active command: Aktivt kommando: - + None Inget - + Active Draft command Aktivt ritkommando - + X coordinate of next point Nästa punkts X koordinat - + X X - + Y Y - + Z Z - + Y coordinate of next point Nästa punkts Y koordinat - + Z coordinate of next point Nästa punkts Z koordinat - + Radius Radie - + Radius of Circle Cirkelradie - + &Relative &Relativ - + Coordinates relative to last point or absolute (SPACE) Relativa koordinater till sista punkten eller absoluta (MELLANSLAG) - + F&illed F&ylld - + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) Markera detta om objektet ska visas som fyllt, annars kommer det att visas som trådmodell (i) - + &Finish &Klart - + Finishes the current drawing or editing operation (F) Avslutar den aktuella ritningen eller redigeringsoperationen (F) - + If checked, command will not finish until you press the command button again Om markerat, så avslutas inte kommandot förrän du trycker på kommandoknappen igen - - &Continue - &Fortsätt - - - + If checked, an OCC-style offset will be performed instead of the classic offset Om detta är markerat så kommer en offset i OCC-stil utföras istället för klassisk offset - + &OCC-style offset &OCC-stil offset - + Add points to the current object Lägg till punkter till det aktuella objektet - + Remove points from the current object Ta bort punkter från det aktuella objektet - + Make Bezier node sharp Make Bezier node sharp - + Make Bezier node tangent Make Bezier node tangent - + Make Bezier node symmetric Make Bezier node symmetric - + &Undo Ån&gra - + Undo the last segment (CTRL+Z) Ångra det sista segmentet (CTRL+Z) - + &Close S&täng - + Finishes and closes the current line (C) Avslutar och stänger den pågående linjen (C) - + &Wipe &Rensa - + Wipes the existing segments of this line and starts again from the last point (W) Rensar befintliga segment av denna linje och börjar om från den sista punkten (W) - + Number of sides Antal sidor - + Offset Offset - + XY XY - + Select XY plane Välj XY plan - + XZ XZ - + Select XZ plane Välj XZ plan - + YZ YZ - + Select YZ plane Välj YZ plan - + View Vy - + Select plane perpendicular to the current view Välj plan vinkelrätt till nuvarande vy - + Do not project points to a drawing plane Projicera inte punkter till ett ritplan - + &Copy K&opiera - + If checked, objects will be copied instead of moved (C) Om markerad, så kommer objekten att kopieras istället för att flyttas - + Text string to draw - Text string to draw + Text att rita - + String Sträng - + Height of text - Height of text + Texthöjd - + Height Höjd - + Intercharacter spacing Intercharacter spacing - + Tracking Tracking - + Full path to font file: - Full path to font file: + Fullständig sökväg till teckensnittsfil: - + Open a FileChooser for font file - Open a FileChooser for font file + Öppna fildialog för teckensnittsfil - + Set/unset a working plane Set/unset a working plane - + Line Color Linjefärg - + Face Color Ytfärg - + Line Width Linjebredd - + Font Size Teckenstorlek - + Apply to selected objects Applicera på valda objekt - + Toggles Construction Mode Växlar konstruktionsläge - + Select Plane Välj plan - + Line Linje - + DWire DWire - + Circle Cirkel - + Center X X center - + Arc Cirkelbåge - + Point Punkt - + Distance Distans - + Trim Trimma - + Pick Object Välj objekt - + Edit Redigera - + Global X Global X - + Global Y Global Y - + Global Z Global Z - + Local X Local X - + Local Y Local Y - + Local Z Local Z - + Invalid Size value. Using 200.0. Invalid Size value. Using 200.0. - + Invalid Tracking value. Using 0. Invalid Tracking value. Using 0. - + Please enter a text string. - Please enter a text string. + Ange en textsträng. - + Select a Font file - Select a Font file + Välj en teckensnittsfil - + Please enter a font file. - Please enter a font file. + Ange en teckensnittsfil. - + Draft.makeBSpline: not enough points - Draft.makeBSpline: not enough points + Draft.makeBSpline: ej tillräckligt antal punkter - + Draft.makeBSpline: Equal endpoints forced Closed - Draft.makeBSpline: Equal endpoints forced Closed + Draft.makeBSpline: Lika slutpunkter tvingade sluten - + Draft.makeBSpline: Invalid pointslist - Draft.makeBSpline: Invalid pointslist + Draft.makeBSpline: Ogiltigt punktlista - + Found groups: closing each open object inside Hittade grupper: stänger alla öppna objekt inuti dem - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidificable object: solidifying it Hittade 1 solidifierbart objekt: solidifierar det - + Found 2 objects: fusing them Hittade 2 objekt: förenar dem - - Found several objects: making a shell - - Found several objects: making a shell - - - - - Found several coplanar objects or faces: making one face - - Found several coplanar objects or faces: making one face - - - - + Found 1 non-parametric objects: draftifying it Hittade 1 icke-parametriskt objekt: görs om till skiss - - Found 1 closed sketch object: making a face from it - - Hittade 1 stängt skissobjekt: gör en yta av det - - - - Found closed wires: making faces - - Found closed wires: making faces - - - - + Found 1 open wire: closing it Hittade 1 öppen tråd: stänger den - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Hittade flera kanter: gör trådar av dem - - Found several non-treatable objects: making compound - - Hittade flera icke-behandlingsbara objekt: gör sammansatt objekt av dem - - - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 parametric object: breaking its dependencies Hittade 1 parametriskt objekt: bryter dess beroenden - + Found 2 objects: subtracting them Hittade 2 objekt: subtraherar dem - + Found several faces: splitting them Hittade flera ytor: delar dem - + Found several objects: subtracting them from the first one Hittade flera objekt: subtraherar dem från den första - + Found 1 face: extracting its wires Hittade 1 yta: utvinner dess trådar - + Found only wires: extracting their edges Hittade bara trådar: utvinner deras kanter - + No more downgrade possible Ingen mer nedgradering är möjlig - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + Pick a face to define the drawing plane Välj en plan yta för att definiera ritplanet - + Pick first point: Välj första punkten: - + Create Line - Create Line + Skapa linje - + Create DWire Skapa DWire - + DWire has been closed DWire har stängts - + Last point has been removed Sista punkten har tagits bort - + Pick next point: Välj nästa punkt: - + Pick next point, or (F)inish or (C)lose: Välj nästa punkt, eller avsluta(F) eller stäng(C): - + BSpline BSpline @@ -2267,7 +2328,7 @@ Values with differences below this value will be treated as same. Spline har stängts - + Create BSpline Skapa BSpline @@ -2277,385 +2338,378 @@ Values with differences below this value will be treated as same. BezCurve - + Bezier curve has been closed - Bezier curve has been closed + Bezierkurva har slutits - + Create BezCurve Create BezCurve - + Rectangle Rektangel - + Create Plane - Create Plane + Skapa plan - + Create Rectangle Skapa rektangel - + Pick opposite point: Välj motsatt punkt: - + Pick center point: Välj centerpunkt: - + Pick radius: Välj radie: - + Pick start angle: Välj startvinkel: - + Pick aperture: Välj vinkelöppning: - + Create Circle Skapa Cirkel - + Create Arc Skapa Cirkelbåge - + Start Angle Startvinkel - + Aperture Öppning - + Aperture angle: Öppningsvinkel: - + Polygon Polygon - + Create Polygon Skapa Polygon - + Ellipse Ellips - + Create Ellipse - Create Ellipse + Skapa ellips - + Text Text - + Pick location point: Välj placeringspunkt: - + Create Text Skapa Text - + Dimension Dimension - + Create Dimension Skapa Dimension - + Edges don't intersect! Kanterna skär inte varandra! - + ShapeString ShapeString - + Pick ShapeString location point: Pick ShapeString location point: - + Create ShapeString Create ShapeString - + Move Flytta - + Select an object to move Välj ett objekt att flytta - + Pick start point: Välj startpunkt: - + Copy Kopiera - + Pick end point: Välj slutpunkt: - + Change Style Ändra Stil - + Select an object to rotate Välj ett objekt att rotera - + Pick rotation center: Välj rotationscentrum: - + Rotate Rotera - + Pick base angle: Välj basvinkel: - + Pick rotation angle: Välj rotationsvinkel: - + Select an object to offset Välj ett objekt att skapa en offset till - + Offset only works on one object at a time Offset fungerar endast på ett objekt åt gången - + Cannot offset this object type Kan inte skapa offset för denna objekttyp - + Pick distance: Välj distans: - + Select an object to upgrade Välj ett objekt att uppgradera - + Upgrade Uppgradera - + Downgrade Nedgradera - - Select an object to trim/extend - - Välj ett objekt att trimma/förlänga - - - - + Scale Skala - + Select an object to scale Välj ett objekt att skala - + Pick base point: Välj baspunkt: - + Pick scale factor: Välj skalfaktor: - + Select an object to project - Select an object to project + Välj ett objekt att projektera - + Select a Draft object to edit Select a Draft object to edit - + This object type is not editable Denna objekttyp kan inte redigeras - + Active object must have more than two points/nodes Aktiva objekt måste ha mer än två punkter/noder - + Selection is not a Knot Selection is not a Knot - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert - Select an object to convert + Välj ett objekt att konvertera - + Select an object to array Select an object to array - + Please select base and path objects Please select base and path objects - + Create Point - Create Point + Skapa punkt - + Select an object to clone - Select an object to clone + Välj ett objekt att klona - + Select face(s) on existing object(s) - Select face(s) on existing object(s) + Välj yta/ytor på befintligt/befintliga objekt @@ -2666,41 +2720,212 @@ Values with differences below this value will be treated as same. - - Installed Macros - Installerade makron - - - + &Draft &Skiss - + Utilities Utilities - + Wire tools Trådverktyg - + Snapping Snapping - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Sides - Sides + Sidor + + + + BSplines and Bezier curves are not supported by this tool + BSplines and Bezier curves are not supported by this tool + + + + The given object is not planar and cannot be converted into a sketch. + The given object is not planar and cannot be converted into a sketch. + + + + Found several objects: creating a shell + + Found several objects: creating a shell + + + + + Found several coplanar objects or faces: creating one face + + Found several coplanar objects or faces: creating one face + + + + + Found 1 linear object: converting to line + + Found 1 linear object: converting to line + + + + + Found 1 closed sketch object: creating a face from it + + Found 1 closed sketch object: creating a face from it + + + + + Found closed wires: creating faces + + Found closed wires: creating faces + + + + + Found several non-treatable objects: creating compound + + Found several non-treatable objects: creating compound + + + + + Length + Längd + + + + Angle + Vinkel + + + + Length of current segment + Längd på aktuellt segment + + + + Angle of current segment + Vinkel på aktuellt segment + + + + Check this to lock the current angle (l) + Markera för att låsa nuvarande vinkel (l) + + + + Con&tinue + Con&tinue + + + + &Select edge + &Select edge + + + + Selects an existing edge to be measured by this dimension (E) + Selects an existing edge to be measured by this dimension (E) + + + + Auto + Auto + + + + Sorry, offset of Bezier curves is currently still not supported + + Sorry, offset of Bezier curves is currently still not supported + + + + + Convert to Sketch + Convert to Sketch + + + + Convert to Draft + Convert to Draft + + + + Convert + Konvertera + + + + Array + Matris + + + + Select object(s) to trim/extend + + Select object(s) to trim/extend + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + Unable to trim these objects, only Draft wires and arcs are supported + + + + + Unable to trim these objects, too many wires + + Unable to trim these objects, too many wires + + + + + These objects don't intersect + + Dessa objekt skär ej varandra + + + + + Too many intersection points + + För många skärningspunkter + + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.qm b/src/Mod/Draft/Resources/translations/Draft_uk.qm index 8eb82ef104..e255fbd70c 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_uk.qm and b/src/Mod/Draft/Resources/translations/Draft_uk.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.ts b/src/Mod/Draft/Resources/translations/Draft_uk.ts index e5630fd756..619379e863 100644 --- a/src/Mod/Draft/Resources/translations/Draft_uk.ts +++ b/src/Mod/Draft/Resources/translations/Draft_uk.ts @@ -1,15 +1,29 @@ + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + + Draft_AddPoint - + Add Point Додати Точку - + Adds a point to an existing wire/bspline Adds a point to an existing wire/bspline @@ -17,12 +31,12 @@ Draft_AddToGroup - + Add to group... Додати до групи... - + Adds the selected object(s) to an existing group Додати обраний(ні) об’єкт(ти) до вже створеної групи @@ -30,12 +44,12 @@ Draft_ApplyStyle - + Apply Current Style Застосувати поточний стиль - + Applies current line width and color to selected objects Застосувати поточну ширину лінії та колір до обраного об'єкту @@ -43,12 +57,12 @@ Draft_Arc - + Arc Дуга - + Creates an arc. CTRL to snap, SHIFT to constrain Створює дугу. Використовуйте CTRL для прив'язки, SHIFT для обмеження @@ -56,12 +70,12 @@ Draft_Array - + Array Масив - + Creates a polar or rectangular array from a selected object Creates a polar or rectangular array from a selected object @@ -69,12 +83,12 @@ Draft_BSpline - + B-Spline B-сплайн - + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain @@ -89,18 +103,18 @@ Creates a Bezier curve. CTRL to snap, SHIFT to constrain - Creates a Bezier curve. CTRL to snap, SHIFT to constrain + Створює криву Безьє. CTRL для захоплення, SHIFT для обмеження Draft_Circle - + Circle Коло - + Creates a circle. CTRL to snap, ALT to select tangent objects Створює коло. CTRL для прив’язки, ALT, для вибору дотичної @@ -108,12 +122,12 @@ Draft_Clone - + Clone Клонувати - + Clones the selected object(s) Клони вибраного об'єкту(ів) @@ -121,12 +135,12 @@ Draft_CloseLine - + Close Line Закрити лінію - + Closes the line being drawn Закриває лінію, що креслиться @@ -134,12 +148,12 @@ Draft_DelPoint - + Remove Point Видалити Точку - + Removes a point from an existing wire or bspline Removes a point from an existing wire or bspline @@ -147,12 +161,12 @@ Draft_Dimension - + Dimension Розмірність - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment Створює розмірність. CTRL для прив'язки, SHIFT для обмеження, ALT для вибору сегмента @@ -160,12 +174,12 @@ Draft_Downgrade - + Downgrade Понизити - + Explodes the selected objects into simpler objects, or subtract faces Розірвати обраний об'єкт на прості об'єкти, або відняти поверхні @@ -173,20 +187,20 @@ Draft_Draft2Sketch - + Draft to Sketch - Draft to Sketch + Креслення у Ескіз Draft_Drawing - + Drawing Малюнок - + Puts the selected objects on a Drawing sheet. Розмістити обрані об'єкти на аркуші креслення. @@ -194,12 +208,12 @@ Draft_Edit - + Edit Правка - + Edits the active object Редагування активного об'єкта @@ -207,25 +221,25 @@ Draft_Ellipse - + Ellipse Еліпс - + Creates an ellipse. CTRL to snap - Creates an ellipse. CTRL to snap + Створити еліпс. CTRL для захоплення Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) Creates a facebinder object from selected face(s) @@ -233,12 +247,12 @@ Draft_FinishLine - + Finish line Завершити лінію - + Finishes a line without closing it Завершення лінії без її закриття @@ -246,12 +260,12 @@ Draft_FlipDimension - + Flip Dimension Flip Dimension - + Flip the normal direction of a dimension Flip the normal direction of a dimension @@ -259,38 +273,25 @@ Draft_Heal - + Heal Heal - - Heal faultly Draft objects saved from an earlier FreeCAD version - Heal faultly Draft objects saved from an earlier FreeCAD version - - - - Draft_Layer - - - Layer - Layer - - - - Adds a layer - Adds a layer + + Heal faulty Draft objects saved from an earlier FreeCAD version + Heal faulty Draft objects saved from an earlier FreeCAD version Draft_Line - + Line Лінія - + Creates a 2-point line. CTRL to snap, SHIFT to constrain Створює лінію по 2-м точкам. Використовуйте CTRL для прив'язки, SHIFT для обмеження @@ -298,12 +299,12 @@ Draft_Move - + Move Переміщення - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy Переміщення обраних об’єктів між двома точками. CTRL для прив’язки, SHIFT для обмеження, ALT для копіювання @@ -311,12 +312,12 @@ Draft_Offset - + Offset Зміщення - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy Зміщення активного об'єкта.CTRL для прив'язки, SHIFT для обмеження, ALT для копіювання @@ -324,12 +325,12 @@ Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. Creates copies of a selected object along a selected path. @@ -337,12 +338,12 @@ Draft_Point - + Point Точка - + Creates a point object Створює об'єкт точка @@ -350,12 +351,12 @@ Draft_Polygon - + Polygon Багатокутник - + Creates a regular polygon. CTRL to snap, SHIFT to constrain Створює вірний багатокутник. CTRL для прив'язки, SHIFT для обмеження @@ -363,12 +364,12 @@ Draft_Rectangle - + Rectangle Прямокутник - + Creates a 2-point rectangle. CTRL to snap Створює прямокутник по 2 точкам. CTRL для прив'язки @@ -376,12 +377,12 @@ Draft_Rotate - + Rotate Обертання - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy Обертання обраних об'єктів. CTRL для прив'язки, SHIFT, для обмеження, ALT для створення копії @@ -389,12 +390,12 @@ Draft_Scale - + Scale Масштабування - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy Масштабує обрані об'єкти з базової точки. CTRL, для прив'язки, SHIFT, для обмеження, ALT для копіювання @@ -402,12 +403,12 @@ Draft_SelectGroup - + Select group Обрати групу - + Selects all objects with the same parents as this group Обрати всі об’єкти, які були породжені такими самими групами, як і ця @@ -415,12 +416,12 @@ Draft_SelectPlane - + SelectPlane Вибір площини - + Select a working plane for geometry creation Вибір робочої площини для створення геометрії @@ -428,17 +429,17 @@ Draft_Shape2DView - + Shape 2D view 2D вигляд фігури - + Creates Shape 2D views of selected objects Creates Shape 2D views of selected objects - + Convert bidirectionally between Draft and Sketch objects Convert bidirectionally between Draft and Sketch objects @@ -446,12 +447,12 @@ Draft_ShapeString - + Shape from text... Shape from text... - + Creates text string in shapes. Creates text string in shapes. @@ -459,12 +460,12 @@ Draft_ShowSnapBar - + Show Snap Bar Показати панель прив'язування - + Shows Draft snap toolbar Показати панель інструментів прив'язки креслення @@ -472,12 +473,12 @@ Draft_Snap_Angle - + Angles - Angles + Кути - + Snaps to 45 and 90 degrees points on arcs and circles Snaps to 45 and 90 degrees points on arcs and circles @@ -485,12 +486,12 @@ Draft_Snap_Center - + Center - Center + Центр - + Snaps to center of circles and arcs Snaps to center of circles and arcs @@ -498,12 +499,12 @@ Draft_Snap_Dimensions - + Dimensions Розміри - + Shows temporary dimensions when snapping to Arch objects Shows temporary dimensions when snapping to Arch objects @@ -511,51 +512,51 @@ Draft_Snap_Endpoint - + Endpoint - Endpoint + Кінцева точка - + Snaps to endpoints of edges - Snaps to endpoints of edges + Прив'язати кінцеві точки до ребер Draft_Snap_Extension - + Extension Extension - + Snaps to extension of edges - Snaps to extension of edges + Прив'язати до подовження ребер Draft_Snap_Grid - + Grid - Grid + Сітка - + Snaps to grid points - Snaps to grid points + Прив'язати до сітки точок Draft_Snap_Intersection - + Intersection Перетин - + Snaps to edges intersections Snaps to edges intersections @@ -563,12 +564,12 @@ Draft_Snap_Lock - + Toggle On/Off Toggle On/Off - + Activates/deactivates all snap tools at once Activates/deactivates all snap tools at once @@ -576,12 +577,12 @@ Draft_Snap_Midpoint - + Midpoint - Midpoint + Середня точка - + Snaps to midpoints of edges Snaps to midpoints of edges @@ -589,12 +590,12 @@ Draft_Snap_Near - + Nearest - Nearest + Найближчий - + Snaps to nearest point on edges Snaps to nearest point on edges @@ -602,12 +603,12 @@ Draft_Snap_Ortho - + Ortho Ortho - + Snaps to orthogonal and 45 degrees directions Snaps to orthogonal and 45 degrees directions @@ -615,12 +616,12 @@ Draft_Snap_Parallel - + Parallel - Parallel + Паралельно - + Snaps to parallel directions of edges Snaps to parallel directions of edges @@ -628,12 +629,12 @@ Draft_Snap_Perpendicular - + Perpendicular - Perpendicular + Перпендикулярно - + Snaps to perpendicular points on edges Snaps to perpendicular points on edges @@ -641,12 +642,12 @@ Draft_Snap_WorkingPlane - + Working Plane - Working Plane + Робоча площина - + Restricts the snapped point to the current working plane Restricts the snapped point to the current working plane @@ -654,12 +655,12 @@ Draft_Text - + Text Текст - + Creates an annotation. CTRL to snap Створює анотацію. CTRL для прив'язки @@ -667,12 +668,12 @@ Draft_ToggleConstructionMode - + Toggle construcion Mode Переключення режиму конструювання - + Toggles the Construction Mode for next objects. Перехід в режим конструювання для наступних об'єктів. @@ -680,12 +681,12 @@ Draft_ToggleContinueMode - + Toggle Continue Mode Toggle Continue Mode - + Toggles the Continue Mode for next commands. Toggles the Continue Mode for next commands. @@ -693,12 +694,12 @@ Draft_ToggleDisplayMode - + Toggle display mode Переключити режим відображення - + Swaps display mode of selected objects between wireframe and flatlines Перемикає режим відображення обраних об’єктів між каркасним та рівними лініями @@ -706,25 +707,25 @@ Draft_ToggleGrid - + Toggle Grid Показати або приховати сітку - - Toggles the Draft gid on/off - Показати або приховати сітку креслення + + Toggles the Draft grid on/off + Toggles the Draft grid on/off Draft_Trimex - + Trimex Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts Обрізати або подовжити обраний об'єкт чи витиснену окрему поверхню. CTRL - прив'язка, SHIFT - обмежити поточним сегментом або нормаллю, ALT - інвертувати @@ -732,12 +733,12 @@ Draft_UndoLine - + Undo last segment Скасувати останній сегмент - + Undoes the last drawn segment of the line being drawn Скасовує останній накреслений сегмент лінії @@ -745,25 +746,38 @@ Draft_Upgrade - + Upgrade Оновлення - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces Об'єднати обрані об'єкти в один, або перетворити замкнені напрямні в закруглені поверхні, або об'єднати поверхні + + Draft_VisGroup + + + VisGroup + VisGroup + + + + Adds a VisGroup + Adds a VisGroup + + Draft_Wire - + DWire DWire - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain @@ -771,12 +785,12 @@ Draft_WireToBSpline - + Wire to BSpline Wire to BSpline - + Converts between Wire and BSpline Converts between Wire and BSpline @@ -804,17 +818,17 @@ стандартний колір для символів прив'язки - + This is the default color for objects being drawn while in construction mode. Стандартний колір для об’єктів створюваних в режимі конструктора. - + This is the default group name for construction geometry Стандартне ім’я групи для конструкції - + Construction Конструкція @@ -920,17 +934,17 @@ such as "Arial:Bold" Оригінальний колір та товщина лінії - + if this is checked, paper space objects will be imported too якщо це обрано, об'єкти простору аркуша будуть також імпортовані - + if this is unchecked, texts/mtexts won't be imported якщо це НЕ обрано, тексти/мультитексти не будуть імпортуватись - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. При експортуванні сплайнів у DXF, вони трансформуються у полілінії. Це значення є максимальною довжиною кожного сегменту полілінії. Якщо значення дорівнює 0, то весь сплайн розглядається як відрізок прямої. @@ -955,7 +969,7 @@ such as "Arial:Bold" Загальні параметри - + Construction group name Construction group name @@ -972,22 +986,22 @@ Values with differences below this value will be treated as same. Значення, що відхиляються на меншу величину, також будуть вірні. - + DXF format options Параметри DXF формату - + Check this if you want the non-named blocks (beginning with a *) to be imported too Check this if you want the non-named blocks (beginning with a *) to be imported too - + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... - + Join geometry Об'єднати геометрію @@ -1087,32 +1101,32 @@ Values with differences below this value will be treated as same. Після копіювання вибрати початкові об'єкти - + If checked, a grid will appear when drawing Якщо встановлено, при виконанні креслення буде показуватися сітка - + Use grid Використовувати сітку - + Grid spacing Розмір сітки - + The spacing between each grid line Відстань між кожною лінією сітки - + Main lines every Main lines every - + Mainlines will be drawn thicker. Specify here how many squares between mainlines. Mainlines will be drawn thicker. Specify here how many squares between mainlines. @@ -1142,22 +1156,22 @@ Values with differences below this value will be treated as same. Направо - + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable - + Group layers into blocks Групувати шари у блоки - + If this is checked, all objects containing faces will be exported as 3d polyfaces Якщо встановлено, всі об'єкти, що мають грані, будуть експортовані у 3D багатогранники - + Export 3D objects as polyface meshes Експортувати 3D-об'єкти як багатогранні сітки @@ -1197,37 +1211,37 @@ Values with differences below this value will be treated as same. Show Working Plane tracker - + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document - If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document + Якщо ця позначка встановлена, імпортований текст отримає стандартний розмір тексту креслення замість розміру, визначеного у DXF-документі - + Use standard font size for texts Використовувати стандартний розмір шрифту для текстів - + If this is checked, hatches will be converted into simple wires Якщо вибрана ця опція, штрихування буде конвертоване в прості лінії - + Import hatch boundaries as wires Імпортувати границі штрихування як лінії - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width - + Render polylines with width Render polylines with width @@ -1282,79 +1296,79 @@ Values with differences below this value will be treated as same. Always snap (disable snap mod) - + Construction geometry Допоміжна геометрія - + Construction geometry color Construction geometry color - + Import - Import + Імпортувати - + texts and dimensions - texts and dimensions + тексти та розміри - + points points - + layouts layouts - + *blocks *blocks - + If this is checked, the exported objects will be projected to reflect the current view direction If this is checked, the exported objects will be projected to reflect the current view direction - + Project exported objects along current view direction Project exported objects along current view direction - + Ellipse export is badly supported. Use this to export them as polylines instead. Ellipse export is badly supported. Use this to export them as polylines instead. - + DWG format options - DWG format options + Параметри DWG-формату - + Path to Teigha File Converter Path to Teigha File Converter - + The path to your Teigha File Converter executable The path to your Teigha File Converter executable Visual settings - Visual settings + Налаштування відображення Visual Settings - Visual Settings + Налаштування відображення @@ -1364,7 +1378,7 @@ Values with differences below this value will be treated as same. Default line width - Default line width + Товщина лінії за замовчанням @@ -1384,7 +1398,7 @@ Values with differences below this value will be treated as same. Color - Color + Колір @@ -1394,27 +1408,27 @@ Values with differences below this value will be treated as same. Grid - Grid + Сітка - + Always show the grid Always show the grid Texts and dimensions - Texts and dimensions + Тексти та розміри Texts - Texts + Тексти font - font + шрифт @@ -1424,55 +1438,40 @@ Values with differences below this value will be treated as same. size - size + розмір - + Dimensions arrows - Dimensions arrows + Стрілки розмірів - + style - style + стиль - + Dot Dot - + Circle Коло - + Arrow Arrow - + The default size of arrows The default size of arrows - - Dimensions lines - Dimensions lines - - - - text above - text above - - - - text inside - text inside - - - + The default size of dimensions extension lines The default size of dimensions extension lines @@ -1484,7 +1483,7 @@ Values with differences below this value will be treated as same. orientation - orientation + орієнтація @@ -1504,7 +1503,7 @@ Values with differences below this value will be treated as same. Select a font file - Select a font file + Обрати файл шрифту @@ -1512,84 +1511,59 @@ Values with differences below this value will be treated as same. Fill objects with faces whenever possible - - DXF / DWG options - DXF / DWG options - - - + Create Створити - - If thi sis checked, only standard Part objects will be created (fastest) - If thi sis checked, only standard Part objects will be created (fastest) - - - + simple Part shapes simple Part shapes - + If this is checked, parametric Draft objects will be created whenever possible If this is checked, parametric Draft objects will be created whenever possible - + Draft objects - Draft objects + Об’єкти креслення - + If this is checked, sketches will be created whenever possible If this is checked, sketches will be created whenever possible - + Sketches - Sketches + Ескізи - + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. - + Get original colors from the DXF file Get original colors from the DXF file - - If this is checked, DXF layers will be imported as Draft layers - If this is checked, DXF layers will be imported as Draft layers - - - - Use Draft Layers - Use Draft Layers - - - + Treat ellipses and splines as polylines Treat ellipses and splines as polylines - + Max Spline Segment: Max Spline Segment: - - - SVG / OCA options - SVG / OCA options - Export style - Export style + Експортувати стиль @@ -1601,21 +1575,146 @@ Values with differences below this value will be treated as same. Show the unit suffix in dimensions Show the unit suffix in dimensions + + + DXF / DWG + DXF / DWG + + + + Automatic update + Automatic update + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + + + + Allow FreeCAD to automatically download and update the DXF libraries + Allow FreeCAD to automatically download and update the DXF libraries + + + + If this is checked, only standard Part objects will be created (fastest) + If this is checked, only standard Part objects will be created (fastest) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + If this is checked, DXF layers will be imported as Draft VisGroups + + + + Use VisGroups + Use VisGroups + + + + mm + мм + + + + SVG / OCA + SVG / OCA + + + + Grid size + Grid size + + + + the number of horizontal or vertical lines of the grid + the number of horizontal or vertical lines of the grid + + + + lines + lines + + + + Dimensions + Розміри + + + + display mode + display mode + + + + text above (2D) + text above (2D) + + + + text inside (3D) + text inside (3D) + + + + extension lines size + extension lines size + + + + Drawing views + Drawing views + + + + Dashed line definition + Dashed line definition + + + + A SVG linestyle definition + A SVG linestyle definition + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + Dashdot line definition + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Dotted line definition + + + + 0.02,0.02 + 0.02,0.02 + Workbench - + Draft Snap Draft Snap - + Draft creation tools Інструменти створення ескізу - + Draft modification tools Інструменти редагування ескізу @@ -1623,648 +1722,609 @@ Values with differences below this value will be treated as same. draft - + Draft Command Bar Draft Command Bar - + active command: активна команда: - + None Немає - + Active Draft command Активна команда креслення - + X coordinate of next point X координати наступної точки - + X X - + Y Y - + Z Z - + Y coordinate of next point Y координати наступної точки - + Z coordinate of next point Z координати наступної точки - + Radius Радіус - + Radius of Circle Радіус кола - + &Relative &Відносно - + Coordinates relative to last point or absolute (SPACE) Координати по відношенню до останнього пункту або абсолютні (Пробіл) - + F&illed За&повнити - + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) Check this if the object should appear as filled, otherwise it will appear as wireframe (i) - + &Finish &Завершити - + Finishes the current drawing or editing operation (F) Завершити поточне креслення або операцію редагування (З) - + If checked, command will not finish until you press the command button again If checked, command will not finish until you press the command button again - - &Continue - &Продовжити - - - + If checked, an OCC-style offset will be performed instead of the classic offset If checked, an OCC-style offset will be performed instead of the classic offset - + &OCC-style offset &OCC-style offset - + Add points to the current object Додати точку до поточного об'єкта - + Remove points from the current object Видалити точки з поточного об'єкту - + Make Bezier node sharp Make Bezier node sharp - + Make Bezier node tangent Make Bezier node tangent - + Make Bezier node symmetric Make Bezier node symmetric - + &Undo &Скасувати - + Undo the last segment (CTRL+Z) Скасувати останній сегмент (Ctrl + Z) - + &Close &Закрити - + Finishes and closes the current line (C) Завершити та закрити поточну лінію (C) - + &Wipe &Очистити - + Wipes the existing segments of this line and starts again from the last point (W) Wipes the existing segments of this line and starts again from the last point (W) - + Number of sides Кількість сторін - + Offset Зміщення - + XY XY - + Select XY plane Вибір XY площини - + XZ XZ - + Select XZ plane Вибір XZ площини - + YZ YZ - + Select YZ plane Вибір YZ площини - + View Вигляд - + Select plane perpendicular to the current view Вибір площини, перпендикулярної до поточної - + Do not project points to a drawing plane Не проектувати точки на площину креслення - + &Copy &Копіювати - + If checked, objects will be copied instead of moved (C) Якщо це обрано, об'єкти будуть скопійовані замість переміщення (C) - + Text string to draw Text string to draw - + String Рядок - + Height of text - Height of text + Висота тексту - + Height Висота - + Intercharacter spacing Intercharacter spacing - + Tracking - Tracking + Відстеження - + Full path to font file: Full path to font file: - + Open a FileChooser for font file Open a FileChooser for font file - + Set/unset a working plane Set/unset a working plane - + Line Color Колір лінії - + Face Color Колір площини - + Line Width Ширина лінії - + Font Size Розмір шрифту - + Apply to selected objects Застосувати до вибраних об'єктів - + Toggles Construction Mode Перемикання режиму конструювання - + Select Plane Вибір площини - + Line Лінія - + DWire DWire - + Circle Коло - + Center X Центр X - + Arc Дуга - + Point Точка - + Distance Відстань - + Trim Обрізати - + Pick Object Виберіть об'єкт - + Edit Правка - + Global X - Global X + Глобальна X - + Global Y - Global Y + Глобальна Y - + Global Z - Global Z + Глобальна Z - + Local X - Local X + Локальна X - + Local Y - Local Y + Локальна Y - + Local Z - Local Z + Локальна Z - + Invalid Size value. Using 200.0. Invalid Size value. Using 200.0. - + Invalid Tracking value. Using 0. Invalid Tracking value. Using 0. - + Please enter a text string. Please enter a text string. - + Select a Font file - Select a Font file + Обрати файл шрифту - + Please enter a font file. Please enter a font file. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + Found groups: closing each open object inside Found groups: closing each open object inside - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidificable object: solidifying it Found 1 solidificable object: solidifying it - + Found 2 objects: fusing them Found 2 objects: fusing them - - Found several objects: making a shell - - Found several objects: making a shell - - - - - Found several coplanar objects or faces: making one face - - Found several coplanar objects or faces: making one face - - - - + Found 1 non-parametric objects: draftifying it Found 1 non-parametric objects: draftifying it - - Found 1 closed sketch object: making a face from it - - Found 1 closed sketch object: making a face from it - - - - - Found closed wires: making faces - - Found closed wires: making faces - - - - + Found 1 open wire: closing it Found 1 open wire: closing it - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them Found several edges: wiring them - - Found several non-treatable objects: making compound - - Знайдено декілька об'єктів, які незмінні: створення складного - - - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 parametric object: breaking its dependencies Знайдений 1 параметричний об'єкт: розривання його залежностей - + Found 2 objects: subtracting them Знайдено 2 об'єкти: їх віднімання - + Found several faces: splitting them Знайдено декілька поверхонь: їх розділення - + Found several objects: subtracting them from the first one Знайдено декілька об'єктів: віднімання їх від першого - + Found 1 face: extracting its wires Знайдена 1 поверхня: отримуємо її каркас - + Found only wires: extracting their edges Found only wires: extracting their edges - + No more downgrade possible No more downgrade possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + Pick a face to define the drawing plane Оберіть фрагмент щоб визначити площину малювання - + Pick first point: Вибрати першу точку: - + Create Line - Create Line + Створити лінію - + Create DWire Create DWire - + DWire has been closed DWire has been closed - + Last point has been removed Last point has been removed - + Pick next point: Вибрати наступну точку: - + Pick next point, or (F)inish or (C)lose: Вибрати наступну точку, або завершити (F) чи закрити (C) - + BSpline B-сплайн @@ -2275,7 +2335,7 @@ Values with differences below this value will be treated as same. Сплайн був замкнений - + Create BSpline Створити BSpline @@ -2285,370 +2345,364 @@ Values with differences below this value will be treated as same. BezCurve - + Bezier curve has been closed Bezier curve has been closed - + Create BezCurve Create BezCurve - + Rectangle Прямокутник - + Create Plane - Create Plane + Створити площину - + Create Rectangle Створити прямокутник - + Pick opposite point: Вибір протилежної точки - + Pick center point: Вибрати центральну точку - + Pick radius: Вибрати радіус - + Pick start angle: Вибрати початковий кут - + Pick aperture: Pick aperture: - + Create Circle Створити коло - + Create Arc Створити дугу - + Start Angle Початковий кут - + Aperture Діафрагма - + Aperture angle: Кутова апертура: - + Polygon Багатокутник - + Create Polygon Створити багатокутник - + Ellipse Еліпс - + Create Ellipse - Create Ellipse + Створити еліпс - + Text Текст - + Pick location point: Вибрати точку розміщення - + Create Text Створити текст - + Dimension Розмірність - + Create Dimension Створити розмір - + Edges don't intersect! Краї не перетинаються! - + ShapeString ShapeString - + Pick ShapeString location point: Pick ShapeString location point: - + Create ShapeString Create ShapeString - + Move Переміщення - + Select an object to move Оберіть об'єкт для переміщення - + Pick start point: Вибір початкової точки - + Copy Копіювати - + Pick end point: Вибір кінцевої точки - + Change Style Змінити стиль - + Select an object to rotate Оберіть об'єкт для обертання - + Pick rotation center: Вибір центру обертання - + Rotate Обертання - + Pick base angle: Вибір базового кута - + Pick rotation angle: Вибір кута обертання - + Select an object to offset Оберіть об'єкт для зміщення - + Offset only works on one object at a time Зсув працює лише з одним об'єктом в один час - + Cannot offset this object type Неможливо змістити цей тип об'єкта - + Pick distance: Вибір відстані - + Select an object to upgrade Виберіть об'єкт для оновлення - + Upgrade Оновлення - + Downgrade Понизити - - Select an object to trim/extend - - Оберіть об'єкт для обрізки/подовження - - - + Scale Масштабування - + Select an object to scale Оберіть об'єкт для масштабування - + Pick base point: Вибір базової точки - + Pick scale factor: Виберіть коефіцієнт масштабування: - + Select an object to project Select an object to project - + Select a Draft object to edit Select a Draft object to edit - + This object type is not editable Цей тип об'єкта не редагується - + Active object must have more than two points/nodes Активний об'єкт повинен мати більше двох точок/вузлів - + Selection is not a Knot - Selection is not a Knot + Виділений елемент не є вузол - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert - Select an object to convert + Обрати об'єкт для перетворення - + Select an object to array Select an object to array - + Please select base and path objects Please select base and path objects - + Create Point - Create Point + Створити точку - + Select an object to clone - Select an object to clone + Виділіть об'єкт для клонування - + Select face(s) on existing object(s) - Select face(s) on existing object(s) - + Виберіть face(s) на існуючому(-их) об'єкті(-ах) + @@ -2658,41 +2712,212 @@ Values with differences below this value will be treated as same. - - Installed Macros - Встановлені макроси - - - + &Draft &Ескіз - + Utilities - Utilities + Утиліти - + Wire tools Інструменти каркасу - + Snapping Snapping - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Sides - Sides + Сторони + + + + BSplines and Bezier curves are not supported by this tool + BSplines and Bezier curves are not supported by this tool + + + + The given object is not planar and cannot be converted into a sketch. + The given object is not planar and cannot be converted into a sketch. + + + + Found several objects: creating a shell + + Found several objects: creating a shell + + + + + Found several coplanar objects or faces: creating one face + + Found several coplanar objects or faces: creating one face + + + + + Found 1 linear object: converting to line + + Found 1 linear object: converting to line + + + + + Found 1 closed sketch object: creating a face from it + + Found 1 closed sketch object: creating a face from it + + + + + Found closed wires: creating faces + + Found closed wires: creating faces + + + + + Found several non-treatable objects: creating compound + + Found several non-treatable objects: creating compound + + + + + Length + Довжина + + + + Angle + Кут + + + + Length of current segment + Length of current segment + + + + Angle of current segment + Angle of current segment + + + + Check this to lock the current angle (l) + Check this to lock the current angle (l) + + + + Con&tinue + Продовжити + + + + &Select edge + &Select edge + + + + Selects an existing edge to be measured by this dimension (E) + Selects an existing edge to be measured by this dimension (E) + + + + Auto + Auto + + + + Sorry, offset of Bezier curves is currently still not supported + + Sorry, offset of Bezier curves is currently still not supported + + + + + Convert to Sketch + Convert to Sketch + + + + Convert to Draft + Convert to Draft + + + + Convert + Convert + + + + Array + Масив + + + + Select object(s) to trim/extend + + Select object(s) to trim/extend + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + Unable to trim these objects, only Draft wires and arcs are supported + + + + + Unable to trim these objects, too many wires + + Unable to trim these objects, too many wires + + + + + These objects don't intersect + + These objects don't intersect + + + + + Too many intersection points + + Too many intersection points + + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm index fae615e4d0..2cc1094dee 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts index 4cc7b36ed5..883173693a 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts @@ -1,15 +1,29 @@ + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + + Draft_AddPoint - + Add Point 添加点 - + Adds a point to an existing wire/bspline 添加点至现有多段线/B样条曲线 @@ -17,12 +31,12 @@ Draft_AddToGroup - + Add to group... 添加到组... - + Adds the selected object(s) to an existing group 添加选中对象至现有组 @@ -30,12 +44,12 @@ Draft_ApplyStyle - + Apply Current Style 应用当前样式 - + Applies current line width and color to selected objects 将当前线宽及颜色应用到选中对象 @@ -43,12 +57,12 @@ Draft_Arc - + Arc 圆弧 - + Creates an arc. CTRL to snap, SHIFT to constrain 创建圆弧.CTRL捕捉,Shift约束 @@ -56,12 +70,12 @@ Draft_Array - + Array 阵列 - + Creates a polar or rectangular array from a selected object 从所选对象创建极坐标或矩形阵列 @@ -69,12 +83,12 @@ Draft_BSpline - + B-Spline B样条曲线 - + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain 创建多点B样条曲线.Ctrl捕捉,Shift约束 @@ -95,12 +109,12 @@ Draft_Circle - + Circle 圆 - + Creates a circle. CTRL to snap, ALT to select tangent objects 创建圆.Ctrl捕捉,Alt选择相切对象 @@ -108,12 +122,12 @@ Draft_Clone - + Clone 克隆 - + Clones the selected object(s) 克隆所选对象 @@ -121,12 +135,12 @@ Draft_CloseLine - + Close Line 闭合线段 - + Closes the line being drawn 闭合当前绘制线段 @@ -134,12 +148,12 @@ Draft_DelPoint - + Remove Point 删除点 - + Removes a point from an existing wire or bspline 自现有多段线或B样条曲线上删除点 @@ -147,12 +161,12 @@ Draft_Dimension - + Dimension 尺寸标注 - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment 创建尺寸标注.Ctrl捕捉,Shift约束,Alt选择线段 @@ -160,12 +174,12 @@ Draft_Downgrade - + Downgrade 降级 - + Explodes the selected objects into simpler objects, or subtract faces 分解选定对象为简单对象,或去除填充面 @@ -173,7 +187,7 @@ Draft_Draft2Sketch - + Draft to Sketch 草图转草绘 @@ -181,12 +195,12 @@ Draft_Drawing - + Drawing 图纸 - + Puts the selected objects on a Drawing sheet. 将选中对象放置到图纸. @@ -194,12 +208,12 @@ Draft_Edit - + Edit 编辑 - + Edits the active object 编辑当前对象 @@ -207,12 +221,12 @@ Draft_Ellipse - + Ellipse 椭圆 - + Creates an ellipse. CTRL to snap Creates an ellipse. CTRL to snap @@ -220,12 +234,12 @@ Draft_Facebinder - + Facebinder Facebinder - + Creates a facebinder object from selected face(s) Creates a facebinder object from selected face(s) @@ -233,12 +247,12 @@ Draft_FinishLine - + Finish line 完成线段 - + Finishes a line without closing it 完成线段但不闭合 @@ -246,12 +260,12 @@ Draft_FlipDimension - + Flip Dimension Flip Dimension - + Flip the normal direction of a dimension Flip the normal direction of a dimension @@ -259,38 +273,25 @@ Draft_Heal - + Heal Heal - - Heal faultly Draft objects saved from an earlier FreeCAD version - Heal faultly Draft objects saved from an earlier FreeCAD version - - - - Draft_Layer - - - Layer - Layer - - - - Adds a layer - Adds a layer + + Heal faulty Draft objects saved from an earlier FreeCAD version + Heal faulty Draft objects saved from an earlier FreeCAD version Draft_Line - + Line 线 - + Creates a 2-point line. CTRL to snap, SHIFT to constrain 两点创建线段.Ctrl捕捉,Shift约束 @@ -298,12 +299,12 @@ Draft_Move - + Move 移动 - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy 移动选中对象.Ctrl捕捉,Shift约束,Alt复制 @@ -311,12 +312,12 @@ Draft_Offset - + Offset 偏移 - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy 偏移当前对象.Ctrl捕捉,Shift约束,Alt复制 @@ -324,12 +325,12 @@ Draft_PathArray - + PathArray PathArray - + Creates copies of a selected object along a selected path. Creates copies of a selected object along a selected path. @@ -337,12 +338,12 @@ Draft_Point - + Point 点 - + Creates a point object 创建点对象 @@ -350,12 +351,12 @@ Draft_Polygon - + Polygon 多边形 - + Creates a regular polygon. CTRL to snap, SHIFT to constrain 创建正多边形.CTRL捕捉,Shift约束 @@ -363,12 +364,12 @@ Draft_Rectangle - + Rectangle 矩形 - + Creates a 2-point rectangle. CTRL to snap 两点创建矩形.Ctrl捕捉 @@ -376,12 +377,12 @@ Draft_Rotate - + Rotate 旋转 - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy 旋转选中对象.CTRL捕捉,Shift约束,Alt复制 @@ -389,12 +390,12 @@ Draft_Scale - + Scale 缩放 - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy 自基点缩放选定对象.Ctrl捕捉,Shift约束,Alt复制 @@ -402,12 +403,12 @@ Draft_SelectGroup - + Select group 选择组 - + Selects all objects with the same parents as this group 选择同一父级下的所有对象 @@ -415,12 +416,12 @@ Draft_SelectPlane - + SelectPlane 选择平面 - + Select a working plane for geometry creation 选择工作平面以创建几何对象 @@ -428,17 +429,17 @@ Draft_Shape2DView - + Shape 2D view 2D 形体视图 - + Creates Shape 2D views of selected objects 创建所选对象的2D形体视图 - + Convert bidirectionally between Draft and Sketch objects 绘图和草绘间双向转换 @@ -446,12 +447,12 @@ Draft_ShapeString - + Shape from text... Shape from text... - + Creates text string in shapes. Creates text string in shapes. @@ -459,12 +460,12 @@ Draft_ShowSnapBar - + Show Snap Bar 显示捕捉栏 - + Shows Draft snap toolbar 显示绘图捕捉工具栏 @@ -472,12 +473,12 @@ Draft_Snap_Angle - + Angles Angles - + Snaps to 45 and 90 degrees points on arcs and circles Snaps to 45 and 90 degrees points on arcs and circles @@ -485,12 +486,12 @@ Draft_Snap_Center - + Center Center - + Snaps to center of circles and arcs Snaps to center of circles and arcs @@ -498,12 +499,12 @@ Draft_Snap_Dimensions - + Dimensions 尺寸 - + Shows temporary dimensions when snapping to Arch objects Shows temporary dimensions when snapping to Arch objects @@ -511,12 +512,12 @@ Draft_Snap_Endpoint - + Endpoint Endpoint - + Snaps to endpoints of edges Snaps to endpoints of edges @@ -524,12 +525,12 @@ Draft_Snap_Extension - + Extension Extension - + Snaps to extension of edges Snaps to extension of edges @@ -537,12 +538,12 @@ Draft_Snap_Grid - + Grid Grid - + Snaps to grid points Snaps to grid points @@ -550,12 +551,12 @@ Draft_Snap_Intersection - + Intersection 交集 - + Snaps to edges intersections Snaps to edges intersections @@ -563,12 +564,12 @@ Draft_Snap_Lock - + Toggle On/Off Toggle On/Off - + Activates/deactivates all snap tools at once Activates/deactivates all snap tools at once @@ -576,12 +577,12 @@ Draft_Snap_Midpoint - + Midpoint Midpoint - + Snaps to midpoints of edges Snaps to midpoints of edges @@ -589,12 +590,12 @@ Draft_Snap_Near - + Nearest Nearest - + Snaps to nearest point on edges Snaps to nearest point on edges @@ -602,12 +603,12 @@ Draft_Snap_Ortho - + Ortho Ortho - + Snaps to orthogonal and 45 degrees directions Snaps to orthogonal and 45 degrees directions @@ -615,12 +616,12 @@ Draft_Snap_Parallel - + Parallel Parallel - + Snaps to parallel directions of edges Snaps to parallel directions of edges @@ -628,12 +629,12 @@ Draft_Snap_Perpendicular - + Perpendicular Perpendicular - + Snaps to perpendicular points on edges Snaps to perpendicular points on edges @@ -641,12 +642,12 @@ Draft_Snap_WorkingPlane - + Working Plane Working Plane - + Restricts the snapped point to the current working plane Restricts the snapped point to the current working plane @@ -654,12 +655,12 @@ Draft_Text - + Text 文本 - + Creates an annotation. CTRL to snap 创建注释.Ctrl捕捉 @@ -667,12 +668,12 @@ Draft_ToggleConstructionMode - + Toggle construcion Mode 切换构造模式 - + Toggles the Construction Mode for next objects. 切换后续对象为构造模式. @@ -680,12 +681,12 @@ Draft_ToggleContinueMode - + Toggle Continue Mode Toggle Continue Mode - + Toggles the Continue Mode for next commands. 后续命令切换为连续模式. @@ -693,12 +694,12 @@ Draft_ToggleDisplayMode - + Toggle display mode 切换显示模式 - + Swaps display mode of selected objects between wireframe and flatlines 切换选中对象的显示模式为"线框"或"带边框着色" @@ -706,25 +707,25 @@ Draft_ToggleGrid - + Toggle Grid 切换网格 - - Toggles the Draft gid on/off - 打开/关闭绘图网格 + + Toggles the Draft grid on/off + Toggles the Draft grid on/off Draft_Trimex - + Trimex 修剪/延伸 - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts 修剪或延伸所选对象,或拉伸单一面. CTRL捕捉,shift约束到当前段或正交,ALT反转 @@ -732,12 +733,12 @@ Draft_UndoLine - + Undo last segment 撤销上一段 - + Undoes the last drawn segment of the line being drawn 撤销当前绘制线段的上一段 @@ -745,25 +746,38 @@ Draft_Upgrade - + Upgrade 升级 - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces 连接选中对象,或将闭合线框转化为填充面,或合并面 + + Draft_VisGroup + + + VisGroup + VisGroup + + + + Adds a VisGroup + Adds a VisGroup + + Draft_Wire - + DWire 草图线 - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain 创建多点草图线.CTRL键捕捉,SHIFT键约束 @@ -771,12 +785,12 @@ Draft_WireToBSpline - + Wire to BSpline 多段线转换为B样条曲线 - + Converts between Wire and BSpline 多段线和B样条曲线相互转换 @@ -804,17 +818,17 @@ 捕捉符号的默认颜色 - + This is the default color for objects being drawn while in construction mode. 这是构造模式下绘制对象的默认颜色. - + This is the default group name for construction geometry 这是构造几何元素的默认组名 - + Construction 构造 @@ -917,17 +931,17 @@ such as "Arial:Bold" 原始颜色和线宽 - + if this is checked, paper space objects will be imported too 选中则导入图纸空间的对象 - + if this is unchecked, texts/mtexts won't be imported 选中则导入文本/多行文本 - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. 当导出样条曲线至DXF时,将被转化为多段线.这个数据是多段线每节分段的最大长度.如果为零,样条曲线将被视为直线段. @@ -952,7 +966,7 @@ such as "Arial:Bold" 常规设置 - + Construction group name 构造组名 @@ -968,22 +982,22 @@ Values with differences below this value will be treated as same. 设置相关功能的公差,在此范围内的数据皆视为相同. - + DXF format options DXF格式选项 - + Check this if you want the non-named blocks (beginning with a *) to be imported too 选中则导入匿名块(块名以"*"开头) - + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... 选中则FreeCAD将尝试把重合对象联合成线.注意,此操作较耗时间... - + Join geometry 联合几何图形 @@ -1083,32 +1097,32 @@ Values with differences below this value will be treated as same. 复制后选中原对象 - + If checked, a grid will appear when drawing 若选中绘图时显示网格 - + Use grid 使用网格 - + Grid spacing 网格间距 - + The spacing between each grid line 每个网格线之间的间距 - + Main lines every 主网格线分格 - + Mainlines will be drawn thicker. Specify here how many squares between mainlines. 主网格线加厚绘制. 在此处指定主网格线间的分格数. @@ -1138,22 +1152,22 @@ Values with differences below this value will be treated as same. 右 - + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable 选中则同一图层的对象组成绘图图块, 显示速度较快, 但不易编辑 - + Group layers into blocks 图层编组创建成图块 - + If this is checked, all objects containing faces will be exported as 3d polyfaces 选中则所有含面对象转换成三维多边形网格面 - + Export 3D objects as polyface meshes 导出3D对象为多边形网格 @@ -1193,37 +1207,37 @@ Values with differences below this value will be treated as same. 显示工作平面追踪器 - + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command 选中则在草图工作台下草图网格总是可见.否则仅命令过程中可见. - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document 选中则导入文本使用标准绘图文字大小, 而非DXF文档中指定的大小 - + Use standard font size for texts 文本使用标准字体大小 - + If this is checked, hatches will be converted into simple wires 选中则填充被转换成简单线条 - + Import hatch boundaries as wires 填充边界导入为线 - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width 选中则当多段线定义了线宽, 它们显示为相应宽度的闭合线框 - + Render polylines with width 显示多段线线宽 @@ -1265,7 +1279,7 @@ Values with differences below this value will be treated as same. Snapping - Snapping + 对齐功能 @@ -1278,67 +1292,67 @@ Values with differences below this value will be treated as same. Always snap (disable snap mod) - + Construction geometry 构造几何体 - + Construction geometry color Construction geometry color - + Import Import - + texts and dimensions texts and dimensions - + points points - + layouts layouts - + *blocks *blocks - + If this is checked, the exported objects will be projected to reflect the current view direction If this is checked, the exported objects will be projected to reflect the current view direction - + Project exported objects along current view direction Project exported objects along current view direction - + Ellipse export is badly supported. Use this to export them as polylines instead. Ellipse export is badly supported. Use this to export them as polylines instead. - + DWG format options DWG format options - + Path to Teigha File Converter Path to Teigha File Converter - + The path to your Teigha File Converter executable The path to your Teigha File Converter executable @@ -1393,7 +1407,7 @@ Values with differences below this value will be treated as same. Grid - + Always show the grid Always show the grid @@ -1423,52 +1437,37 @@ Values with differences below this value will be treated as same. size - + Dimensions arrows Dimensions arrows - + style style - + Dot Dot - + Circle 圆 - + Arrow Arrow - + The default size of arrows The default size of arrows - - Dimensions lines - Dimensions lines - - - - text above - text above - - - - text inside - text inside - - - + The default size of dimensions extension lines The default size of dimensions extension lines @@ -1508,80 +1507,55 @@ Values with differences below this value will be treated as same. Fill objects with faces whenever possible - - DXF / DWG options - DXF / DWG options - - - + Create 创建 - - If thi sis checked, only standard Part objects will be created (fastest) - If thi sis checked, only standard Part objects will be created (fastest) - - - + simple Part shapes simple Part shapes - + If this is checked, parametric Draft objects will be created whenever possible If this is checked, parametric Draft objects will be created whenever possible - + Draft objects Draft objects - + If this is checked, sketches will be created whenever possible If this is checked, sketches will be created whenever possible - + Sketches Sketches - + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. - + Get original colors from the DXF file Get original colors from the DXF file - - If this is checked, DXF layers will be imported as Draft layers - If this is checked, DXF layers will be imported as Draft layers - - - - Use Draft Layers - Use Draft Layers - - - + Treat ellipses and splines as polylines Treat ellipses and splines as polylines - + Max Spline Segment: Max Spline Segment: - - - SVG / OCA options - SVG / OCA options - Export style @@ -1597,21 +1571,146 @@ Values with differences below this value will be treated as same. Show the unit suffix in dimensions Show the unit suffix in dimensions + + + DXF / DWG + DXF / DWG + + + + Automatic update + Automatic update + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + + + + Allow FreeCAD to automatically download and update the DXF libraries + Allow FreeCAD to automatically download and update the DXF libraries + + + + If this is checked, only standard Part objects will be created (fastest) + If this is checked, only standard Part objects will be created (fastest) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + If this is checked, DXF layers will be imported as Draft VisGroups + + + + Use VisGroups + Use VisGroups + + + + mm + mm + + + + SVG / OCA + SVG / OCA + + + + Grid size + Grid size + + + + the number of horizontal or vertical lines of the grid + the number of horizontal or vertical lines of the grid + + + + lines + lines + + + + Dimensions + 尺寸 + + + + display mode + display mode + + + + text above (2D) + text above (2D) + + + + text inside (3D) + text inside (3D) + + + + extension lines size + extension lines size + + + + Drawing views + Drawing views + + + + Dashed line definition + Dashed line definition + + + + A SVG linestyle definition + A SVG linestyle definition + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + Dashdot line definition + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Dotted line definition + + + + 0.02,0.02 + 0.02,0.02 + Workbench - + Draft Snap Draft Snap - + Draft creation tools 绘图创建工具 - + Draft modification tools 绘图修改工具 @@ -1619,635 +1718,597 @@ Values with differences below this value will be treated as same. draft - + Draft Command Bar Draft Command Bar - + active command: 当前命令: - + None 无 - + Active Draft command 当前绘图命令 - + X coordinate of next point 下一个点的X坐标 - + X X - + Y Y - + Z Z - + Y coordinate of next point 下一个点的Y坐标 - + Z coordinate of next point 下一个点的Z坐标 - + Radius 半径 - + Radius of Circle 圆半径 - + &Relative 相对(&R) - + Coordinates relative to last point or absolute (SPACE) 相对于上一点坐标或绝对坐标(空间) - + F&illed 填充(&F) - + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) 若选中则对象显示为填充,否则现实为线框 - + &Finish 完成(&F) - + Finishes the current drawing or editing operation (F) 完成当前绘图或编辑操作(F) - + If checked, command will not finish until you press the command button again 选中则命令连续运行直至再次按下命令按钮 - - &Continue - 连续(&C) - - - + If checked, an OCC-style offset will be performed instead of the classic offset 若选中则使用OCC风格偏移而非经典偏移 - + &OCC-style offset &OCC风格偏移 - + Add points to the current object 将点添加到当前对象 - + Remove points from the current object 从当前对象中删除点 - + Make Bezier node sharp Make Bezier node sharp - + Make Bezier node tangent Make Bezier node tangent - + Make Bezier node symmetric Make Bezier node symmetric - + &Undo 撤消(&U) - + Undo the last segment (CTRL+Z) 撤消上一段(CTRL+Z) - + &Close 闭合(&C) - + Finishes and closes the current line (C) 完成并闭合当前线段(C) - + &Wipe 擦除(&W) - + Wipes the existing segments of this line and starts again from the last point (W) 清除线段的现有段并从上一点重新开始 - + Number of sides 边数 - + Offset 偏移 - + XY XY - + Select XY plane 选择XY平面 - + XZ XZ - + Select XZ plane 选择XZ平面 - + YZ YZ - + Select YZ plane 选择YZ平面 - + View 视图 - + Select plane perpendicular to the current view 选择垂直于当前视图的平面 - + Do not project points to a drawing plane 不在绘图平面上投影点 - + &Copy 复制(&C) - + If checked, objects will be copied instead of moved (C) 选中则对象将被复制而非移动(C) - + Text string to draw Text string to draw - + String 字符串 - + Height of text Height of text - + Height 高度 - + Intercharacter spacing Intercharacter spacing - + Tracking Tracking - + Full path to font file: Full path to font file: - + Open a FileChooser for font file Open a FileChooser for font file - + Set/unset a working plane Set/unset a working plane - + Line Color 线条颜色 - + Face Color 表面颜色 - + Line Width 线宽 - + Font Size 字体大小 - + Apply to selected objects 应用于选中对象 - + Toggles Construction Mode 切换构造模式 - + Select Plane 选择平面 - + Line 线 - + DWire 草图线 - + Circle 圆 - + Center X 圆心 X - + Arc 圆弧 - + Point 点 - + Distance 距离 - + Trim 修剪 - + Pick Object 选择对象 - + Edit 编辑 - + Global X Global X - + Global Y Global Y - + Global Z Global Z - + Local X Local X - + Local Y Local Y - + Local Z Local Z - + Invalid Size value. Using 200.0. Invalid Size value. Using 200.0. - + Invalid Tracking value. Using 0. Invalid Tracking value. Using 0. - + Please enter a text string. Please enter a text string. - + Select a Font file Select a Font file - + Please enter a font file. Please enter a font file. - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + Found groups: closing each open object inside 发现组:关闭组中打开的对象 - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidificable object: solidifying it 发现可实体化对象: 实体化 - + Found 2 objects: fusing them 发现两个对象:融合 - - Found several objects: making a shell - - Found several objects: making a shell - - - - - Found several coplanar objects or faces: making one face - - Found several coplanar objects or faces: making one face - - - - + Found 1 non-parametric objects: draftifying it 发现一个非参数化对象:草绘修正 - - Found 1 closed sketch object: making a face from it - - 发现一个闭合的草绘对象:从其创建面 - - - - Found closed wires: making faces - - Found closed wires: making faces - - - - + Found 1 open wire: closing it 发现一个开放多段线:闭合 - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them 发现若干边:组成多段线 - - Found several non-treatable objects: making compound - - 发现若干未处理对象:混合 - - - + Unable to upgrade these objects. Unable to upgrade these objects. - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 parametric object: breaking its dependencies 发现一个参数化对象:去除依赖 - + Found 2 objects: subtracting them 发现两个对象:相减 - + Found several faces: splitting them 发现若干面:炸开它们 - + Found several objects: subtracting them from the first one 发现若干对象:从第一个中减去 - + Found 1 face: extracting its wires 发现一个面:提取线框 - + Found only wires: extracting their edges 仅发现线框:提取边 - + No more downgrade possible 无法再降级 - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + Pick a face to define the drawing plane 选择一个面作为绘图平面 - + Pick first point: 选择第一点: - + Create Line Create Line - + Create DWire 创建草图线 - + DWire has been closed 草图线已闭合 - + Last point has been removed 最后一点已被删除 - + Pick next point: 选择下一点: - + Pick next point, or (F)inish or (C)lose: 选择下一点,或完成(F)|闭合(C): - + BSpline B样条曲线 @@ -2258,7 +2319,7 @@ Values with differences below this value will be treated as same. 样条曲线已闭合 - + Create BSpline 创建B样条曲线 @@ -2268,363 +2329,357 @@ Values with differences below this value will be treated as same. BezCurve - + Bezier curve has been closed Bezier curve has been closed - + Create BezCurve Create BezCurve - + Rectangle 矩形 - + Create Plane Create Plane - + Create Rectangle 创建矩形 - + Pick opposite point: 选择对角点: - + Pick center point: 选择中心点: - + Pick radius: 选择半径: - + Pick start angle: 选择起始角: - + Pick aperture: 选择捕捉靶框: - + Create Circle 创建圆 - + Create Arc 创建弧 - + Start Angle 起始角度 - + Aperture 张角 - + Aperture angle: 捕捉靶框角: - + Polygon 多边形 - + Create Polygon 创建多边形 - + Ellipse 椭圆 - + Create Ellipse Create Ellipse - + Text 文本 - + Pick location point: 选择定位点: - + Create Text 创建文本 - + Dimension 尺寸标注 - + Create Dimension 创建尺寸标注 - + Edges don't intersect! 边不相交! - + ShapeString ShapeString - + Pick ShapeString location point: Pick ShapeString location point: - + Create ShapeString Create ShapeString - + Move 移动 - + Select an object to move 选择要移动的对象 - + Pick start point: 选择起点: - + Copy 复制 - + Pick end point: 选择终点: - + Change Style 更改样式 - + Select an object to rotate 选择要旋转的对象 - + Pick rotation center: 选择旋转中心: - + Rotate 旋转 - + Pick base angle: 选择基准角: - + Pick rotation angle: 选择旋转角度: - + Select an object to offset 选择要偏移的对象 - + Offset only works on one object at a time 偏移操作每次只能针对一个对象 - + Cannot offset this object type 无法偏移此类对象 - + Pick distance: 选择距离: - + Select an object to upgrade 选择要升级的对象 - + Upgrade 升级 - + Downgrade 降级 - - Select an object to trim/extend - - 选择要修剪/延伸的对象 - - - + Scale 缩放 - + Select an object to scale 选择要缩放的对象 - + Pick base point: 选择基准点: - + Pick scale factor: 选择缩放比例: - + Select an object to project Select an object to project - + Select a Draft object to edit Select a Draft object to edit - + This object type is not editable 此类型对象不可编辑 - + Active object must have more than two points/nodes 当前对象必须包含2个以上的点/节点 - + Selection is not a Knot Selection is not a Knot - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert Select an object to convert - + Select an object to array Select an object to array - + Please select base and path objects Please select base and path objects - + Create Point Create Point - + Select an object to clone Select an object to clone - + Select face(s) on existing object(s) Select face(s) on existing object(s) @@ -2638,41 +2693,212 @@ Values with differences below this value will be treated as same. - - Installed Macros - 已安装的宏 - - - + &Draft 绘图(&D) - + Utilities Utilities - + Wire tools 线框工具 - + Snapping - Snapping + 对齐功能 - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Sides Sides + + + BSplines and Bezier curves are not supported by this tool + BSplines and Bezier curves are not supported by this tool + + + + The given object is not planar and cannot be converted into a sketch. + The given object is not planar and cannot be converted into a sketch. + + + + Found several objects: creating a shell + + Found several objects: creating a shell + + + + + Found several coplanar objects or faces: creating one face + + Found several coplanar objects or faces: creating one face + + + + + Found 1 linear object: converting to line + + Found 1 linear object: converting to line + + + + + Found 1 closed sketch object: creating a face from it + + Found 1 closed sketch object: creating a face from it + + + + + Found closed wires: creating faces + + Found closed wires: creating faces + + + + + Found several non-treatable objects: creating compound + + Found several non-treatable objects: creating compound + + + + + Length + 长度 + + + + Angle + 角度 + + + + Length of current segment + Length of current segment + + + + Angle of current segment + Angle of current segment + + + + Check this to lock the current angle (l) + Check this to lock the current angle (l) + + + + Con&tinue + Con & 继续 + + + + &Select edge + &Select edge + + + + Selects an existing edge to be measured by this dimension (E) + Selects an existing edge to be measured by this dimension (E) + + + + Auto + Auto + + + + Sorry, offset of Bezier curves is currently still not supported + + Sorry, offset of Bezier curves is currently still not supported + + + + + Convert to Sketch + Convert to Sketch + + + + Convert to Draft + Convert to Draft + + + + Convert + Convert + + + + Array + 阵列 + + + + Select object(s) to trim/extend + + Select object(s) to trim/extend + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + Unable to trim these objects, only Draft wires and arcs are supported + + + + + Unable to trim these objects, too many wires + + Unable to trim these objects, too many wires + + + + + These objects don't intersect + + These objects don't intersect + + + + + Too many intersection points + + Too many intersection points + + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm b/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm index b31167a21b..ee6502778a 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts index 43883c2506..1473b65bc6 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts @@ -1,15 +1,29 @@ + + Draft + + + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + Download of dxf libraries failed. +Please download them manually from: +https://github.com/yorikvanhavre/Draft-dxf-importer +and place them in your macros folder. + + Draft_AddPoint - + Add Point 添加點 - + Adds a point to an existing wire/bspline 將點添加到現有的聚合線/雲形線 @@ -17,12 +31,12 @@ Draft_AddToGroup - + Add to group... 加入群阻... - + Adds the selected object(s) to an existing group 將所選的物件添加到現有群組 @@ -30,12 +44,12 @@ Draft_ApplyStyle - + Apply Current Style 套用目前的樣式 - + Applies current line width and color to selected objects 將當前的線寬和顏色應用於所選物件 @@ -43,12 +57,12 @@ Draft_Arc - + Arc 弧 - + Creates an arc. CTRL to snap, SHIFT to constrain 創建弧。按Ctrl 貼齊，按SHIFT 正交 @@ -56,12 +70,12 @@ Draft_Array - + Array 矩陣 - + Creates a polar or rectangular array from a selected object 由所選物件建立一個極或矩形陣列 @@ -69,12 +83,12 @@ Draft_BSpline - + B-Spline B-Spline - + Creates a multiple-point b-spline. CTRL to snap, SHIFT to constrain 建立一多點b-spline,CTRL為快速,SHIFT為手動 @@ -95,12 +109,12 @@ Draft_Circle - + Circle 圓 - + Creates a circle. CTRL to snap, ALT to select tangent objects 創建圓。按Ctrl 貼齊、按ALT 選擇相切物件 @@ -108,12 +122,12 @@ Draft_Clone - + Clone 複製 - + Clones the selected object(s) 複製所選物件 @@ -121,12 +135,12 @@ Draft_CloseLine - + Close Line 閉合線 - + Closes the line being drawn 閉合正在繪製的線條 @@ -134,12 +148,12 @@ Draft_DelPoint - + Remove Point 移除點 - + Removes a point from an existing wire or bspline 從現有的有聚合線或雲形線中移除點 @@ -147,12 +161,12 @@ Draft_Dimension - + Dimension 標註 - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment 創建標註。按CTRL 貼齊，按SHIFT 正交，按ALT 選取線段 @@ -160,12 +174,12 @@ Draft_Downgrade - + Downgrade 降級 - + Explodes the selected objects into simpler objects, or subtract faces 分解所選的物件為簡單的物件，或差集面 @@ -173,7 +187,7 @@ Draft_Draft2Sketch - + Draft to Sketch 草圖至素描 @@ -181,12 +195,12 @@ Draft_Drawing - + Drawing 圖面 - + Puts the selected objects on a Drawing sheet. 將所選的物件放到圖面上。 @@ -194,12 +208,12 @@ Draft_Edit - + Edit 編輯 - + Edits the active object 編輯使用中物件 @@ -207,12 +221,12 @@ Draft_Ellipse - + Ellipse 橢圓 - + Creates an ellipse. CTRL to snap 建立一個橢圓,CTRL可鎖點 @@ -220,12 +234,12 @@ Draft_Facebinder - + Facebinder 面連接器 - + Creates a facebinder object from selected face(s) 由所選面中建立一個面連接器物件 @@ -233,12 +247,12 @@ Draft_FinishLine - + Finish line 完成線 - + Finishes a line without closing it 完成線而不閉合它 @@ -246,12 +260,12 @@ Draft_FlipDimension - + Flip Dimension 翻轉維度 - + Flip the normal direction of a dimension Flip the normal direction of a dimension @@ -259,38 +273,25 @@ Draft_Heal - + Heal 修復 - - Heal faultly Draft objects saved from an earlier FreeCAD version - Heal faultly Draft objects saved from an earlier FreeCAD version - - - - Draft_Layer - - - Layer - 圖層 - - - - Adds a layer - 增加圖層 + + Heal faulty Draft objects saved from an earlier FreeCAD version + Heal faulty Draft objects saved from an earlier FreeCAD version Draft_Line - + Line 線 - + Creates a 2-point line. CTRL to snap, SHIFT to constrain 創建 2點線。Ctrl 鍵可對齊，SHIFT 鍵正交限制 @@ -298,12 +299,12 @@ Draft_Move - + Move 移動 - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy 2點之間移動選取的物件。按CTRL 貼齊，按SHIFT 正交，按ALT 複製 @@ -311,12 +312,12 @@ Draft_Offset - + Offset 偏移複製 - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy 偏移複製使用中物件。按Ctrl 貼齊，按SHIFT 正交，按ALT 複製 @@ -324,12 +325,12 @@ Draft_PathArray - + PathArray 路徑陣列 - + Creates copies of a selected object along a selected path. 沿所選路徑建立所選物件之複製 @@ -337,12 +338,12 @@ Draft_Point - + Point 點 - + Creates a point object 建立一個點物件 @@ -350,12 +351,12 @@ Draft_Polygon - + Polygon 多邊形 - + Creates a regular polygon. CTRL to snap, SHIFT to constrain 創建正多邊形。按CTRL 貼齊，按SHIFT 正交 @@ -363,12 +364,12 @@ Draft_Rectangle - + Rectangle 矩形 - + Creates a 2-point rectangle. CTRL to snap 創建 2 點矩形。按Ctrl 貼齊 @@ -376,12 +377,12 @@ Draft_Rotate - + Rotate 旋轉 - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy 旋轉所選的物件。按CTRL 貼齊，按SHIFT 正交，按ALT 創建副本 @@ -389,12 +390,12 @@ Draft_Scale - + Scale 縮放 - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy 從基準點縮放選取的物件。按CTRL 貼齊，按SHIFT 正交，按ALT 複製 @@ -402,12 +403,12 @@ Draft_SelectGroup - + Select group 選擇群組 - + Selects all objects with the same parents as this group 選擇此群組中同系物件 @@ -415,12 +416,12 @@ Draft_SelectPlane - + SelectPlane 選取平面 - + Select a working plane for geometry creation 選取一個幾何創建的工作平面 @@ -428,17 +429,17 @@ Draft_Shape2DView - + Shape 2D view 造型2D視圖 - + Creates Shape 2D views of selected objects 建立選定物件之2D造型視圖 - + Convert bidirectionally between Draft and Sketch objects 於草圖及素描物件間雙向轉換 @@ -446,12 +447,12 @@ Draft_ShapeString - + Shape from text... 由文字建立造型... - + Creates text string in shapes. 於造型上建立文字 @@ -459,12 +460,12 @@ Draft_ShowSnapBar - + Show Snap Bar 顯示快選區 - + Shows Draft snap toolbar 顯示草圖快選工具列 @@ -472,12 +473,12 @@ Draft_Snap_Angle - + Angles 角度 - + Snaps to 45 and 90 degrees points on arcs and circles Snaps to 45 and 90 degrees points on arcs and circles @@ -485,12 +486,12 @@ Draft_Snap_Center - + Center 中心 - + Snaps to center of circles and arcs Snaps to center of circles and arcs @@ -498,12 +499,12 @@ Draft_Snap_Dimensions - + Dimensions 尺寸 - + Shows temporary dimensions when snapping to Arch objects Shows temporary dimensions when snapping to Arch objects @@ -511,12 +512,12 @@ Draft_Snap_Endpoint - + Endpoint 終點 - + Snaps to endpoints of edges Snaps to endpoints of edges @@ -524,12 +525,12 @@ Draft_Snap_Extension - + Extension 延伸 - + Snaps to extension of edges 對齊邊界之延伸 @@ -537,12 +538,12 @@ Draft_Snap_Grid - + Grid 格線 - + Snaps to grid points 對齊至格線上之點 @@ -550,12 +551,12 @@ Draft_Snap_Intersection - + Intersection 交集 - + Snaps to edges intersections 對齊至邊界交叉處 @@ -563,12 +564,12 @@ Draft_Snap_Lock - + Toggle On/Off 切換開/關 - + Activates/deactivates all snap tools at once 一次啟動/取消所有鎖點工具 @@ -576,12 +577,12 @@ Draft_Snap_Midpoint - + Midpoint 中點 - + Snaps to midpoints of edges 對齊至邊界之中點 @@ -589,12 +590,12 @@ Draft_Snap_Near - + Nearest 最近處 - + Snaps to nearest point on edges 對齊至邊界上的最近點 @@ -602,12 +603,12 @@ Draft_Snap_Ortho - + Ortho Ortho - + Snaps to orthogonal and 45 degrees directions Snaps to orthogonal and 45 degrees directions @@ -615,12 +616,12 @@ Draft_Snap_Parallel - + Parallel 平行 - + Snaps to parallel directions of edges Snaps to parallel directions of edges @@ -628,12 +629,12 @@ Draft_Snap_Perpendicular - + Perpendicular 垂直 - + Snaps to perpendicular points on edges 鎖點至邊緣上的垂直點 @@ -641,12 +642,12 @@ Draft_Snap_WorkingPlane - + Working Plane 工作平面 - + Restricts the snapped point to the current working plane Restricts the snapped point to the current working plane @@ -654,12 +655,12 @@ Draft_Text - + Text 文字 - + Creates an annotation. CTRL to snap 創建註解。按Ctrl 貼齊 @@ -667,12 +668,12 @@ Draft_ToggleConstructionMode - + Toggle construcion Mode 切換建造模式 - + Toggles the Construction Mode for next objects. 切換下一個物件的建造模式。 @@ -680,12 +681,12 @@ Draft_ToggleContinueMode - + Toggle Continue Mode 切換連續模式 - + Toggles the Continue Mode for next commands. 為下一個指令切換連續模式 @@ -693,12 +694,12 @@ Draft_ToggleDisplayMode - + Toggle display mode 切換顯示模式 - + Swaps display mode of selected objects between wireframe and flatlines 切換選取物件(線框和平板+邊緣)之間的顯示模式 @@ -706,25 +707,25 @@ Draft_ToggleGrid - + Toggle Grid 切換網格 - - Toggles the Draft gid on/off - 開/關草圖格線 + + Toggles the Draft grid on/off + Toggles the Draft grid on/off Draft_Trimex - + Trimex 修剪及延伸 - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts 修剪或延展選定物件或延展單一面,CTRL為快速,SHIFT為手動限制為目前片斷或垂直,ALT為相反 @@ -732,12 +733,12 @@ Draft_UndoLine - + Undo last segment 復原上一段 - + Undoes the last drawn segment of the line being drawn 復原已繪製線的上一線段 @@ -745,25 +746,38 @@ Draft_Upgrade - + Upgrade 升級 - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces 將選取的物件連結成一個物件，或將閉合線成轉換成填實面，或聯結面 + + Draft_VisGroup + + + VisGroup + VisGroup + + + + Adds a VisGroup + Adds a VisGroup + + Draft_Wire - + DWire DWire - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain 建立一多點草圖線(DWire),CTRL可快選,SHIFT可限制 @@ -771,12 +785,12 @@ Draft_WireToBSpline - + Wire to BSpline 聚合線轉雲形線 - + Converts between Wire and BSpline 聚合線和雲形線之間的轉換 @@ -804,17 +818,17 @@ 貼齊符號的預設顏色 - + This is the default color for objects being drawn while in construction mode. 這是建構模式中繪製物件的預設顏色。 - + This is the default group name for construction geometry 這是建構幾何的預設組名稱 - + Construction 建構 @@ -917,17 +931,17 @@ such as "Arial:Bold" 原有的顏色和線寬 - + if this is checked, paper space objects will be imported too 如果勾選此選項，圖紙空間的物件也將一併匯入 - + if this is unchecked, texts/mtexts won't be imported 如果未勾選，文字/多行文字將不會被匯入 - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. 當雲形線匯出為 DXF，它們將轉換為聚合線。這個值是聚合線每個線段的最大長度，如果值為0，則整條雲形線將被視為一條直線段。 @@ -952,7 +966,7 @@ such as "Arial:Bold" 一般設定 - + Construction group name 建構群組名稱 @@ -968,22 +982,22 @@ Values with differences below this value will be treated as same. 這是透過公差函數的使用值。低於此值時不同的值將被視為相同值。 - + DXF format options DXF 格式選項 - + Check this if you want the non-named blocks (beginning with a *) to be imported too 如果您要(以 * 開頭）的未命名圖塊也要一併匯入，請勾選 - + If checked, freecad will try to joint coincident objects into wires. Beware, this can take a while... 如果勾選此選項，freecad 將嘗試接合重合物件到聚合線。請注意，這可能需要一些時間... - + Join geometry 加入幾何形 @@ -1083,32 +1097,32 @@ Values with differences below this value will be treated as same. 複製後選定原始物件 - + If checked, a grid will appear when drawing 若勾選,於繪圖時會顯示網格 - + Use grid 使用網格 - + Grid spacing 網格間距 - + The spacing between each grid line 格線間距 - + Main lines every 所有主要線段 - + Mainlines will be drawn thicker. Specify here how many squares between mainlines. 主線較粗,特別於主線間有許多方形時 @@ -1138,22 +1152,22 @@ Values with differences below this value will be treated as same. 右 - + if this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable 若勾選此項目,相同圖層之物件將會被整合至草圖圖塊,使顯示加快,但卻使其修正變困難 - + Group layers into blocks 將圖層作為圖塊 - + If this is checked, all objects containing faces will be exported as 3d polyfaces 若勾選此項目,所有具面之物件將會以3d聚合面匯出 - + Export 3D objects as polyface meshes 以聚合面網格匯出3D物件 @@ -1193,37 +1207,37 @@ Values with differences below this value will be treated as same. 顯示工作平面追蹤器 - + If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command 若勾選,草圖格線當草圖工作區啟動時皆會顯示,否則僅要求時顯示 - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document 若勾選,匯入之文字會採用標準草圖文字尺寸來代替DXF文件中的尺寸 - + Use standard font size for texts 文字採用標準尺寸 - + If this is checked, hatches will be converted into simple wires 若勾選,剖面線會轉變為簡單線條 - + Import hatch boundaries as wires 匯入剖面線邊界為線條 - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width 若勾選,當聚合線具有寬度設定時,其會以正確寬度的封閉線條渲染 - + Render polylines with width 渲染帶有寬度之聚合線 @@ -1278,67 +1292,67 @@ Values with differences below this value will be treated as same. Always snap (disable snap mod) - + Construction geometry 構造幾何 - + Construction geometry color Construction geometry color - + Import 匯入 - + texts and dimensions 文字和尺寸 - + points 點 - + layouts 配置 - + *blocks *blocks - + If this is checked, the exported objects will be projected to reflect the current view direction If this is checked, the exported objects will be projected to reflect the current view direction - + Project exported objects along current view direction Project exported objects along current view direction - + Ellipse export is badly supported. Use this to export them as polylines instead. Ellipse export is badly supported. Use this to export them as polylines instead. - + DWG format options DWG格式選項 - + Path to Teigha File Converter Path to Teigha File Converter - + The path to your Teigha File Converter executable The path to your Teigha File Converter executable @@ -1393,7 +1407,7 @@ Values with differences below this value will be treated as same. 格線 - + Always show the grid 永遠顯示格線 @@ -1423,52 +1437,37 @@ Values with differences below this value will be treated as same. 尺寸 - + Dimensions arrows 標註箭頭 - + style 風格 - + Dot 點 - + Circle 圓 - + Arrow 箭頭 - + The default size of arrows 箭頭預設尺寸 - - Dimensions lines - 標註線條 - - - - text above - 文字在上 - - - - text inside - 文字在內 - - - + The default size of dimensions extension lines 標註延長線預設大小 @@ -1508,80 +1507,55 @@ Values with differences below this value will be treated as same. Fill objects with faces whenever possible - - DXF / DWG options - DXF / DWG選項 - - - + Create 建立 - - If thi sis checked, only standard Part objects will be created (fastest) - If thi sis checked, only standard Part objects will be created (fastest) - - - + simple Part shapes simple Part shapes - + If this is checked, parametric Draft objects will be created whenever possible If this is checked, parametric Draft objects will be created whenever possible - + Draft objects Draft objects - + If this is checked, sketches will be created whenever possible If this is checked, sketches will be created whenever possible - + Sketches Sketches - + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. - + Get original colors from the DXF file Get original colors from the DXF file - - If this is checked, DXF layers will be imported as Draft layers - If this is checked, DXF layers will be imported as Draft layers - - - - Use Draft Layers - Use Draft Layers - - - + Treat ellipses and splines as polylines Treat ellipses and splines as polylines - + Max Spline Segment: 最大Spline片段: - - - SVG / OCA options - SVG / OCA選項 - Export style @@ -1597,21 +1571,146 @@ Values with differences below this value will be treated as same. Show the unit suffix in dimensions 於標註中顯示單位 + + + DXF / DWG + DXF / DWG + + + + Automatic update + Automatic update + + + + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> + + + + Allow FreeCAD to automatically download and update the DXF libraries + Allow FreeCAD to automatically download and update the DXF libraries + + + + If this is checked, only standard Part objects will be created (fastest) + If this is checked, only standard Part objects will be created (fastest) + + + + If this is checked, DXF layers will be imported as Draft VisGroups + If this is checked, DXF layers will be imported as Draft VisGroups + + + + Use VisGroups + Use VisGroups + + + + mm + mm + + + + SVG / OCA + SVG / OCA + + + + Grid size + Grid size + + + + the number of horizontal or vertical lines of the grid + the number of horizontal or vertical lines of the grid + + + + lines + lines + + + + Dimensions + 尺寸 + + + + display mode + display mode + + + + text above (2D) + text above (2D) + + + + text inside (3D) + text inside (3D) + + + + extension lines size + extension lines size + + + + Drawing views + Drawing views + + + + Dashed line definition + Dashed line definition + + + + A SVG linestyle definition + A SVG linestyle definition + + + + 0.09,0.05 + 0.09,0.05 + + + + Dashdot line definition + Dashdot line definition + + + + 0.09,0.05,0.02,0.05 + 0.09,0.05,0.02,0.05 + + + + Dotted line definition + Dotted line definition + + + + 0.02,0.02 + 0.02,0.02 + Workbench - + Draft Snap Draft Snap - + Draft creation tools 草圖建立工具 - + Draft modification tools 草圖修改工具 @@ -1619,634 +1718,596 @@ Values with differences below this value will be treated as same. draft - + Draft Command Bar Draft Command Bar - + active command: 啟動指令： - + None 無 - + Active Draft command 啟動草案指令 - + X coordinate of next point 下一個點的X座標 - + X X - + Y Ÿ - + Z Z - + Y coordinate of next point 下一個點的Y座標 - + Z coordinate of next point 下一個點的Z座標 - + Radius 半徑 - + Radius of Circle 圓半徑 - + &Relative 相對(&R) - + Coordinates relative to last point or absolute (SPACE) 最後一點的相對或絕對坐標（空間） - + F&illed &充填 - + Check this if the object should appear as filled, otherwise it will appear as wireframe (i) 若要物件顯示填滿請點選此項目,否則其將顯示為線架構 - + &Finish &結束 - + Finishes the current drawing or editing operation (F) 結束目前繪圖或編輯程序(F) - + If checked, command will not finish until you press the command button again 如果選取，命令將不會完成直到你再次按這個命令按鈕 - - &Continue - 繼續(&C) - - - + If checked, an OCC-style offset will be performed instead of the classic offset 若勾選,會以OCC型式取代基本印刷型式 - + &OCC-style offset &OCC型式印刷 - + Add points to the current object 於目前物件中增加點 - + Remove points from the current object 將點從目前物件上移除 - + Make Bezier node sharp Make Bezier node sharp - + Make Bezier node tangent Make Bezier node tangent - + Make Bezier node symmetric Make Bezier node symmetric - + &Undo 復原(&U) - + Undo the last segment (CTRL+Z) 復原上一段 (CTRL + Z) - + &Close 關閉(&C) - + Finishes and closes the current line (C) 完成並閉合當前線（C） - + &Wipe &擦 - + Wipes the existing segments of this line and starts again from the last point (W) 清除此現存在片段並重新由最後一點開始(W) - + Number of sides 邊數 - + Offset 偏移複製 - + XY XY - + Select XY plane 選擇 XY 平面 - + XZ XZ - + Select XZ plane 選擇 XZ平面 - + YZ YZ - + Select YZ plane 選擇 YZ 平面 - + View 檢視 - + Select plane perpendicular to the current view 選取垂直於當前視圖的平面 - + Do not project points to a drawing plane 不投射點到繪圖平面 - + &Copy 複製(&C) - + If checked, objects will be copied instead of moved (C) 若選取，物件將被複製而不是移動（C） - + Text string to draw Text string to draw - + String 字串 - + Height of text 字高 - + Height 高度 - + Intercharacter spacing Intercharacter spacing - + Tracking 追蹤 - + Full path to font file: 字型檔完整路徑: - + Open a FileChooser for font file Open a FileChooser for font file - + Set/unset a working plane Set/unset a working plane - + Line Color 線條顏色 - + Face Color 面顏色 - + Line Width 線寬 - + Font Size 字體大小 - + Apply to selected objects 應用於所選物件 - + Toggles Construction Mode 切換建造模式 - + Select Plane 選擇平面 - + Line 線 - + DWire DWire - + Circle 圓 - + Center X 中心 X - + Arc 弧 - + Point 點 - + Distance 距離 - + Trim 修剪 - + Pick Object 選取物件 - + Edit 編輯 - + Global X 全域X - + Global Y 全域Y - + Global Z 全域Z - + Local X 區域X - + Local Y 區域Y - + Local Z 區域Z - + Invalid Size value. Using 200.0. 無效值。使用 200.0。 - + Invalid Tracking value. Using 0. Invalid Tracking value. Using 0. - + Please enter a text string. 請輸入一段文字 - + Select a Font file 選擇一個字型檔 - + Please enter a font file. 請輸入字型檔。 - + Draft.makeBSpline: not enough points Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist Draft.makeBSpline: Invalid pointslist - + Found groups: closing each open object inside 找到群組:封閉內部各開放物件 - + Found mesh(es): turning into Part shapes Found mesh(es): turning into Part shapes - + Found 1 solidificable object: solidifying it 找到1可實體化物件：將其實體化 - + Found 2 objects: fusing them 找到兩個物件:將其融合 - - Found several objects: making a shell - - Found several objects: making a shell - - - - - Found several coplanar objects or faces: making one face - - Found several coplanar objects or faces: making one face - - - - + Found 1 non-parametric objects: draftifying it 找到一個未參數化物件:編輯此物件 - - Found 1 closed sketch object: making a face from it - - 找到一封閉素描物件:由其產生面 - - - - Found closed wires: making faces - - Found closed wires: making faces - - - - + Found 1 open wire: closing it 找到一開放線條:將其封閉 - + Found several open wires: joining them Found several open wires: joining them - + Found several edges: wiring them 找到數個邊緣:將其轉為線條 - - Found several non-treatable objects: making compound - - 找到數個未設定物件:製作元件 - - - + Unable to upgrade these objects. 無法升級這些物件 - + Found 1 block: exploding it Found 1 block: exploding it - + Found 1 parametric object: breaking its dependencies 找到一參數化物件:分離其相依性 - + Found 2 objects: subtracting them 找到兩個物件:取其差集 - + Found several faces: splitting them 找到數個面:將其分割 - + Found several objects: subtracting them from the first one 找到數個物件:由第一個進行差集 - + Found 1 face: extracting its wires 尋找一面：擷取它的線條 - + Found only wires: extracting their edges 僅找到線條:提取邊緣 - + No more downgrade possible 無法在下降 - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + Pick a face to define the drawing plane 選取一個面來定義繪圖的平面 - + Pick first point: 選取第一個點： - + Create Line 建立線 - + Create DWire 建立DWire - + DWire has been closed DWire已封閉 - + Last point has been removed 被移除之最後一點 - + Pick next point: 選取下一個點： - + Pick next point, or (F)inish or (C)lose: 選取下一個點，或(F)完成或(C)閉合： - + BSpline BSpline @@ -2257,7 +2318,7 @@ Values with differences below this value will be treated as same. Spline已封閉 - + Create BSpline 建立BSpline @@ -2267,358 +2328,352 @@ Values with differences below this value will be treated as same. 貝茲曲線 - + Bezier curve has been closed 貝茲曲線已封閉 - + Create BezCurve 建立貝茲曲線 - + Rectangle 矩形 - + Create Plane 建立平面 - + Create Rectangle 建立矩型 - + Pick opposite point: 選取對角點： - + Pick center point: 選取中心點： - + Pick radius: 選擇半徑： - + Pick start angle: 選取開始角度： - + Pick aperture: 選擇孔徑: - + Create Circle 建立圓 - + Create Arc 建立弧線 - + Start Angle 起始角度 - + Aperture 孔徑 - + Aperture angle: 孔徑角： - + Polygon 多邊形 - + Create Polygon 建立多邊形 - + Ellipse 橢圓 - + Create Ellipse 建立橢圓 - + Text 文字 - + Pick location point: 選取定位點： - + Create Text 建立文字 - + Dimension 標註 - + Create Dimension 建立尺度 - + Edges don't intersect! 邊緣未相交! - + ShapeString ShapeString - + Pick ShapeString location point: Pick ShapeString location point: - + Create ShapeString Create ShapeString - + Move 移動 - + Select an object to move 選擇要移動的物件 - + Pick start point: 選取起始點： - + Copy 複製 - + Pick end point: 選取終結點： - + Change Style 改變樣式 - + Select an object to rotate 選取要旋轉的物件 - + Pick rotation center: 選取旋轉中心： - + Rotate 旋轉 - + Pick base angle: 選取底角： - + Pick rotation angle: 選取旋轉角度： - + Select an object to offset 選取一個物件，以偏移複製 - + Offset only works on one object at a time 每次只能對一個物件偏移複製 - + Cannot offset this object type 無法顯示此物件類型 - + Pick distance: 選取距離： - + Select an object to upgrade 選取要升級的物件 - + Upgrade 升級 - + Downgrade 降級 - - Select an object to trim/extend - - 選取要修剪/延伸物件 - - - + Scale 縮放 - + Select an object to scale 選取要縮放的物件 - + Pick base point: 選取基準點： - + Pick scale factor: 選取縮放比例： - + Select an object to project Select an object to project - + Select a Draft object to edit Select a Draft object to edit - + This object type is not editable 此物件類型是不可編輯的 - + Active object must have more than two points/nodes 使用中的物件必須有兩個以上的點/節點 - + Selection is not a Knot Selection is not a Knot - + Endpoint of BezCurve can't be smoothed Endpoint of BezCurve can't be smoothed - + Select an object to convert 選擇一個物件進行轉換 - + Select an object to array 選擇一個物件進行陣列配置 - + Please select base and path objects 請選擇基礎和路徑物件 - + Create Point 建立點 - + Select an object to clone 選擇一個要複製的物件 - + Select face(s) on existing object(s) 選擇於已存在物件上的面 @@ -2630,41 +2685,212 @@ Values with differences below this value will be treated as same. 無Teigha 轉檔器，DWG 支援已停用。 - - Installed Macros - 已安裝巨集 - - - + &Draft &草圖 - + Utilities 功能 - + Wire tools 線條工具 - + Snapping 對齊 - + Found 1 multi-solids compound: exploding it Found 1 multi-solids compound: exploding it - + Sides Sides + + + BSplines and Bezier curves are not supported by this tool + BSplines and Bezier curves are not supported by this tool + + + + The given object is not planar and cannot be converted into a sketch. + The given object is not planar and cannot be converted into a sketch. + + + + Found several objects: creating a shell + + Found several objects: creating a shell + + + + + Found several coplanar objects or faces: creating one face + + Found several coplanar objects or faces: creating one face + + + + + Found 1 linear object: converting to line + + Found 1 linear object: converting to line + + + + + Found 1 closed sketch object: creating a face from it + + Found 1 closed sketch object: creating a face from it + + + + + Found closed wires: creating faces + + Found closed wires: creating faces + + + + + Found several non-treatable objects: creating compound + + Found several non-treatable objects: creating compound + + + + + Length + 長度 + + + + Angle + 角度 + + + + Length of current segment + Length of current segment + + + + Angle of current segment + Angle of current segment + + + + Check this to lock the current angle (l) + Check this to lock the current angle (l) + + + + Con&tinue + 連續 + + + + &Select edge + &Select edge + + + + Selects an existing edge to be measured by this dimension (E) + Selects an existing edge to be measured by this dimension (E) + + + + Auto + Auto + + + + Sorry, offset of Bezier curves is currently still not supported + + Sorry, offset of Bezier curves is currently still not supported + + + + + Convert to Sketch + Convert to Sketch + + + + Convert to Draft + Convert to Draft + + + + Convert + Convert + + + + Array + 矩陣 + + + + Select object(s) to trim/extend + + Select object(s) to trim/extend + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + Unable to trim these objects, only Draft wires and arcs are supported + + + + + Unable to trim these objects, too many wires + + Unable to trim these objects, too many wires + + + + + These objects don't intersect + + These objects don't intersect + + + + + Too many intersection points + + Too many intersection points + + + + + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + The DXF import/export libraries needed by FreeCAD to handle +the DXF format were not found on this system. +Please either enable FreeCAD to download these libraries: + 1 - Load Draft workbench + 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads +Or download these libraries manually, as explained on +https://github.com/yorikvanhavre/Draft-dxf-importer + diff --git a/src/Mod/Drawing/Gui/Resources/Drawing.qrc b/src/Mod/Drawing/Gui/Resources/Drawing.qrc index 970cf57395..5cc31ad3e8 100644 --- a/src/Mod/Drawing/Gui/Resources/Drawing.qrc +++ b/src/Mod/Drawing/Gui/Resources/Drawing.qrc @@ -43,5 +43,6 @@ translations/Drawing_ro.qm translations/Drawing_hu.qm translations/Drawing_pt-PT.qm + translations/Drawing_sr.qm diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_af.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_af.qm index 0ec34f8ff0..66641550c2 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_af.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_af.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_af.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_af.ts index 1156b06dc7..7f020c072e 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_af.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_af.ts @@ -49,13 +49,13 @@ &Draft View - + &Draft View Inserts a Draft view of the selected object(s) in the active drawing - + Inserts a Draft view of the selected object(s) in the active drawing @@ -311,26 +311,28 @@ Different orientation - + Different orientation The printer uses a different orientation than the drawing. Do you want to continue? - + The printer uses a different orientation than the drawing. +Do you want to continue? Different paper size - + Different paper size The printer uses a different paper size than the drawing. Do you want to continue? - + The printer uses a different paper size than the drawing. +Do you want to continue? @@ -706,12 +708,12 @@ Do you want to continue? %1%2 %3 (%4) - + %1%2 %3 (%4) Insert new %1%2 %3 (%4) drawing - + Insert new %1%2 %3 (%4) drawing @@ -764,7 +766,7 @@ Do you want to continue? No page found - + No page found @@ -773,12 +775,12 @@ Do you want to continue? Create a page first. - + Create a page first. Select exactly one Part object. - + Select exactly one Part object. @@ -789,7 +791,7 @@ Do you want to continue? SVG (*.svg) - + SVG (*.svg) SVG(*.svg) diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_cs.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_cs.qm index 3680137bdd..cbcd9956da 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_cs.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_cs.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_cs.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_cs.ts index ef1f330d11..46049c4e55 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_cs.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_cs.ts @@ -49,13 +49,13 @@ &Draft View - + &Pohled z Návrhu Inserts a Draft view of the selected object(s) in the active drawing - + Vloží pohled vybraných objektů z Návrhu do aktivního výkresu @@ -213,7 +213,7 @@ Inserts a symbol from a svg file in the active drawing - Inserts a symbol from a svg file in the active drawing + Vložit symbol ze souboru svg do aktivního výkresu @@ -311,26 +311,28 @@ Different orientation - + Jiná orientace The printer uses a different orientation than the drawing. Do you want to continue? - + Tiskárna používá jinou orientaci než výkres. +Chcete pokračovat? Different paper size - + Jiný formát papíru The printer uses a different paper size than the drawing. Do you want to continue? - + Tiskárna používá jiný formát papíru než výkres. +Chcete pokračovat? @@ -354,7 +356,7 @@ Do you want to continue? Right click for axonometric settings - Right click for axonometric settings + Pro nastavení axonometrie klikněte pravým tlačítkem @@ -364,17 +366,17 @@ Do you want to continue? Spacing dx / dy - Spacing dx / dy + Odsazení dx / dy    Axis out and right - Axis out and right + Osa ven a doprava Vertical tilt - Vertical tilt + Svislý sklon @@ -419,32 +421,32 @@ Do you want to continue? Isometric - Isometric + Izometrie Dimetric - Dimetric + Dimetrie Trimetric - Trimetric + Trimetrie Scale - Scale + Měřítko View projection - View projection + Projekce pohledu Axis aligned up - Axis aligned up + Osa směřující nahoru @@ -455,7 +457,7 @@ Do you want to continue? Trimetric - Trimetric + Trimetrie @@ -475,12 +477,12 @@ Do you want to continue? View from: - View from: + Pohled od osy: Axis aligned right: - Axis aligned right: + Osa směřující doprava: Primary View @@ -686,7 +688,7 @@ Do you want to continue? Landscape - Landscape + Na šířku @@ -701,17 +703,17 @@ Do you want to continue? Insert new %1%2 %3 drawing - Insert new %1%2 %3 drawing + Vložit nový %1%2 %3 výkres %1%2 %3 (%4) - + %1%2 %3 (%4) Insert new %1%2 %3 (%4) drawing - + Vložit nový %1%2 %3 (%4) výkres @@ -764,7 +766,7 @@ Do you want to continue? No page found - + Stránka nebyla nalezena @@ -773,12 +775,12 @@ Do you want to continue? Create a page first. - + Vytvořte nejprve stránku. Select exactly one Part object. - + Vyberte právě jednu součást. @@ -789,7 +791,7 @@ Do you want to continue? SVG (*.svg) - + SVG (*.svg) SVG(*.svg) @@ -838,19 +840,19 @@ Do you want to continue? Make axonometric... - Make axonometric... + Změnit na axonometrický Edit axonometric settings... - Edit axonometric settings... + Upravit nastavení axonometrie... Make orthographic - Make orthographic + Změnit na ortografický diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_de.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_de.qm index d6df8abb8b..2eaff23956 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_de.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_de.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_de.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_de.ts index d134f3a25e..c0a465298d 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_de.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_de.ts @@ -1,6 +1,6 @@ - + CmdDrawingAnnotation @@ -49,13 +49,13 @@ &Draft View - + &Entwurfsansicht Inserts a Draft view of the selected object(s) in the active drawing - + Fügt eine Entwurfsansicht der(des) ausgewählten Objekte(s) in die aktive Zeichnung ein @@ -207,13 +207,13 @@ &Symbol - + &Symbol Inserts a symbol from a svg file in the active drawing - + Fügt ein Symbol aus einer SVG-Datei in der aktiven Zeichnung ein @@ -311,26 +311,26 @@ Different orientation - + Andere Ausrichtung The printer uses a different orientation than the drawing. Do you want to continue? - + Der Drucker verwendet eine andere Orientierung als die Zeichnung. Möchten Sie fortfahren? Different paper size - + Anderes Papierformat The printer uses a different paper size than the drawing. Do you want to continue? - + Der Drucker verwendet eine andere Papiergröße als die Zeichnung. Möchten Sie fortfahren? @@ -354,108 +354,108 @@ Do you want to continue? Right click for axonometric settings - + Rechtsklick für axonometrische Einstellungen Top left x / y - + Oben links x / y Spacing dx / dy - + Abstand dx / dy    Axis out and right - +  Achse außerhalb und rechts Vertical tilt - + Vertikale Neigung X +ve - + X +ve Y +ve - + Y +ve Z +ve - + Z +ve X -ve - + X -ve Y -ve - + Y -ve Z -ve - + Z -ve Isometric - + Isometrisch Dimetric - + Dimetrisch Trimetric - + Trimetrisch Scale - + Maßstab View projection - +  Ansichtsprojektion    Axis aligned up - +  Achse nach oben ausgerichtet Flip - + Umdrehen Trimetric - + Trimetrisch @@ -475,12 +475,12 @@ Do you want to continue? View from: - + Blick von: Axis aligned right: - + Achse nach rechts ausgerichtet: Primary View @@ -686,32 +686,32 @@ Do you want to continue? Landscape - + Landschaft Portrait - + Porträt %1%2 %3 - + %1%2 %3 Insert new %1%2 %3 drawing - + Neue %1%2 %3 Zeichnung einfügen %1%2 %3 (%4) - + %1%2 %3 (%4) Insert new %1%2 %3 (%4) drawing - + Neue %1%2 %3 (%4) Zeichnung einfügen @@ -764,7 +764,7 @@ Do you want to continue? No page found - + Keine Seite gefunden @@ -773,12 +773,12 @@ Do you want to continue? Create a page first. - + Erstellen Sie zunächst eine Seite. Select exactly one Part object. - + Wählen Sie genau ein Teil-Objekt. @@ -789,7 +789,7 @@ Do you want to continue? SVG (*.svg) - + SVG (*.SVG) SVG(*.svg) @@ -838,19 +838,19 @@ Do you want to continue? Make axonometric... - + Axonometrisch machen... Edit axonometric settings... - + Axonometrie-Einstellungen bearbeiten... Make orthographic - + Orthographisch machen diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_es-ES.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_es-ES.qm index ca4158cb14..6987c4e6b3 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_es-ES.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_es-ES.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_es-ES.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_es-ES.ts index ca2e3247f4..16125c740f 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_es-ES.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_es-ES.ts @@ -49,13 +49,13 @@ &Draft View - + &Vista Boceto Inserts a Draft view of the selected object(s) in the active drawing - + Inserta una vista de boceto del/los objeto(s) seleccionado(s) en el dibujo activo @@ -194,7 +194,7 @@ Project shape onto a user-defined plane - Forma de proyecto en un plano definido por el usuario + Projectar silueta a un plano definido por el usuario @@ -311,26 +311,28 @@ Different orientation - + Orientación diferente de la hoja The printer uses a different orientation than the drawing. Do you want to continue? - + La impresora utiliza una orientación de papel distinta a la del dibujo. +¿Desea continuar? Different paper size - + Distinto tamaño de papel The printer uses a different paper size than the drawing. Do you want to continue? - + La impresora usa un tamaño de papel distinto al del dibujo. +¿Desea continuar? @@ -369,7 +371,7 @@ Do you want to continue? Axis out and right - Axis out and right + sentido de axis a derecha @@ -706,12 +708,12 @@ Do you want to continue? %1%2 %3 (%4) - + %1%2 %3 (%4) Insert new %1%2 %3 (%4) drawing - + Inserte nuevo dibujo %1%2 %3 (%4) @@ -764,7 +766,7 @@ Do you want to continue? No page found - + No se ha encontrado una página de dibujo @@ -773,12 +775,12 @@ Do you want to continue? Create a page first. - + Cree una página de dibujo primero. Select exactly one Part object. - + Seleccione un único objeto parte. @@ -789,7 +791,7 @@ Do you want to continue? SVG (*.svg) - + SVG (*.svg) SVG(*.svg) diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_fi.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_fi.qm index 52d05abd36..93d03336de 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_fi.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_fi.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_fi.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_fi.ts index 7be24e1b82..263bb80fc5 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_fi.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_fi.ts @@ -6,7 +6,7 @@ Drawing - Piirustus + Piirros @@ -25,7 +25,7 @@ Drawing - Piirustus + Piirros @@ -44,18 +44,18 @@ Drawing - Piirustus + Piirros &Draft View - + & Vedos näkymä Inserts a Draft view of the selected object(s) in the active drawing - + Lisää valitun kohteen (kohteiden) vedosnäkymän aktiivisessa piirroksessa @@ -82,7 +82,7 @@ Drawing - Piirustus + Piirros @@ -96,7 +96,7 @@ Drawing - Piirustus + Piirros @@ -110,7 +110,7 @@ Drawing - Piirustus + Piirros @@ -128,7 +128,7 @@ Drawing - Piirustus + Piirros @@ -146,7 +146,7 @@ Drawing - Piirustus + Piirros @@ -165,7 +165,7 @@ Drawing - Piirustus + Piirros @@ -175,7 +175,7 @@ Insert an orthographic projection of a part in the active drawing - Lisää osan ortografinen projektio aktiiviseen tekniseen piirustukseen + Lisää ortografinen projektio aktiivisen teknisen piirroksen osasta @@ -183,12 +183,12 @@ Drawing - Piirustus + Piirros Project shape... - Projektin muodot... + Projektin muoto... @@ -202,18 +202,18 @@ Drawing - Piirustus + Piirros &Symbol - &Symbol + & Symboli Inserts a symbol from a svg file in the active drawing - Inserts a symbol from a svg file in the active drawing + Lisää symbolin svg-tiedostosta aktiiviseen piirrokseen @@ -311,26 +311,28 @@ Different orientation - + Erilainen sivun suunta The printer uses a different orientation than the drawing. Do you want to continue? - + Tulostin käyttää eri paperisuuntaa kuin piirros. +Haluatko jatkaa? Different paper size - + Erilainen paperikoko The printer uses a different paper size than the drawing. Do you want to continue? - + Tulostin käyttää eri paperikokoa kuin piirros. +Haluatko jatkaa? @@ -354,108 +356,108 @@ Do you want to continue? Right click for axonometric settings - Right click for axonometric settings + Napsauta hiiren oikeata nappia aksonometrisille asetuksille Top left x / y - Top left x / y + Ylävasen x / y Spacing dx / dy - Spacing dx / dy + Välit dx / dy Axis out and right - Axis out and right + Akseli ulos oikealle Vertical tilt - Vertical tilt + pystykallistus X +ve - X +ve + X + ve Y +ve - Y +ve + Y + ve Z +ve - Z +ve + Z + ve X -ve - X -ve + X - ve Y -ve - Y -ve + Y - ve Z -ve - Z -ve + Z - ve Isometric - Isometric + Isometrinen Dimetric - Dimetric + Dimetrinen Trimetric - Trimetric + Trimetrinen Scale - Scale + Mittakaava View projection - View projection + Katso projektio Axis aligned up - Axis aligned up + Akseli tasattu ylös Flip - Flip + Käännä Trimetric - Trimetric + Trimetrinen @@ -475,12 +477,12 @@ Do you want to continue? View from: - View from: + Näkymä: Axis aligned right: - Axis aligned right: + Akseli tasattu oikealle: Primary View @@ -544,12 +546,12 @@ Do you want to continue? Auto scale / position - Automaattinen asteikko / paikka + Automaattinen skaalaus / sijainti Scale - Skaalaa + Mittakaava Primary x / y @@ -580,17 +582,17 @@ Do you want to continue? Visible sharp edges - Näytä terävät reunat + Näkyvät terävät reunat Visible smooth edges - Näytä pehmeät reunat + Näkyvät pehmeät reunat Visible sewn edges - Näytä pehmeäkantiset reunat + Näkyvät pehmeäkantiset reunat @@ -605,17 +607,17 @@ Do you want to continue? Hidden sharp edges - Piilota terävät reunat + Piilotetut terävät reunat Hidden smooth edges - Hidden pehmeät reunat + Piilotetut pehmeät reunat Hidden sewn edges - Piilota pehmeäkantiset reunat + Piilotetut pehmeäkantiset reunat @@ -625,7 +627,7 @@ Do you want to continue? Hidden isoparameters - Piilota isoparametrit + Piilotetut isoparametrit @@ -686,12 +688,12 @@ Do you want to continue? Landscape - Landscape + Vaakasuora Portrait - Portrait + Pystysuora @@ -701,17 +703,17 @@ Do you want to continue? Insert new %1%2 %3 drawing - Insert new %1%2 %3 drawing + Lisää uusi %1%2 %3 piirros %1%2 %3 (%4) - + %1%2 %3 (%4) Insert new %1%2 %3 (%4) drawing - + Laita uusi %1%2 %3 (%4) piirros @@ -730,7 +732,7 @@ Do you want to continue? Scalable Vector Graphics (*.svg *.svgz) - Skaalautuvat Vektori Grafiikat (*.svg *.svgz) + Skaalautuvat vektorigrafiikat (*.svg *.svgz) @@ -764,7 +766,7 @@ Do you want to continue? No page found - + Sivua ei löydy @@ -773,23 +775,23 @@ Do you want to continue? Create a page first. - + Luo sivu ensin. Select exactly one Part object. - + Valitse täsmälleen yksi osa-kohde. Select one Page object. - Valitse yksi sivu objektista. + Valitse yksi sivu-objekti. SVG (*.svg) - + SVG (*.svg) SVG(*.svg) @@ -838,19 +840,19 @@ Do you want to continue? Make axonometric... - Make axonometric... + Tee aksonometrisenä... Edit axonometric settings... - Edit axonometric settings... + Muokkaa aksonometrisiä asetuksia... Make orthographic - Make orthographic + Tee ortograafinen @@ -858,7 +860,7 @@ Do you want to continue? Drawing - Piirustus + Piirros diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_fr.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_fr.qm index 572930f1bf..720d2d73fc 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_fr.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_fr.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_fr.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_fr.ts index 95ad65078f..330c8b3a6e 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_fr.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_fr.ts @@ -49,13 +49,13 @@ &Draft View - + &Draft Vue Inserts a Draft view of the selected object(s) in the active drawing - + Insère une vue Draft des objets sélectionnés dans la page active @@ -311,26 +311,26 @@ Different orientation - + Orientation différente The printer uses a different orientation than the drawing. Do you want to continue? - + L'imprimante utilise une orientation différente que le dessin. Voulez-vous continuer ? Different paper size - + Format de papier différent The printer uses a different paper size than the drawing. Do you want to continue? - + L'imprimante utilise un format de papier différent que le dessin. Voulez-vous continuer ? @@ -706,12 +706,12 @@ Do you want to continue? %1%2 %3 (%4) - + %1%2 %3 (%4) Insert new %1%2 %3 (%4) drawing - + Insérer le nouveau dessin %1 %2 %3 (%4) @@ -764,7 +764,7 @@ Do you want to continue? No page found - + Aucune page trouvée @@ -773,12 +773,12 @@ Do you want to continue? Create a page first. - + Créez d'abord une page. Select exactly one Part object. - + Sélectionnez exactement un seul objet Pièce. @@ -789,7 +789,7 @@ Do you want to continue? SVG (*.svg) - + SVG (*.svg) SVG(*.svg) @@ -850,7 +850,7 @@ Do you want to continue? Make orthographic - Faire orthographique + Rendre orthographique diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_hr.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_hr.qm index d4272ee12a..f397f36bc9 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_hr.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_hr.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_hr.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_hr.ts index e5dabd16d4..40c68069ce 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_hr.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_hr.ts @@ -49,13 +49,13 @@ &Draft View - + &Draft View Inserts a Draft view of the selected object(s) in the active drawing - + Inserts a Draft view of the selected object(s) in the active drawing @@ -311,26 +311,28 @@ Different orientation - + Different orientation The printer uses a different orientation than the drawing. Do you want to continue? - + The printer uses a different orientation than the drawing. +Do you want to continue? Different paper size - + Different paper size The printer uses a different paper size than the drawing. Do you want to continue? - + The printer uses a different paper size than the drawing. +Do you want to continue? @@ -706,12 +708,12 @@ Do you want to continue? %1%2 %3 (%4) - + %1%2 %3 (%4) Insert new %1%2 %3 (%4) drawing - + Insert new %1%2 %3 (%4) drawing @@ -764,7 +766,7 @@ Do you want to continue? No page found - + No page found @@ -773,12 +775,12 @@ Do you want to continue? Create a page first. - + Create a page first. Select exactly one Part object. - + Select exactly one Part object. @@ -789,7 +791,7 @@ Do you want to continue? SVG (*.svg) - + SVG (*.svg) SVG(*.svg) diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.qm index 92ea736d0d..319a4579f6 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.ts index 3e1a6a4c88..be8af17ac9 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.ts @@ -49,13 +49,13 @@ &Draft View - + &Draft View Inserts a Draft view of the selected object(s) in the active drawing - + Inserts a Draft view of the selected object(s) in the active drawing @@ -311,26 +311,28 @@ Different orientation - + Different orientation The printer uses a different orientation than the drawing. Do you want to continue? - + The printer uses a different orientation than the drawing. +Do you want to continue? Different paper size - + Different paper size The printer uses a different paper size than the drawing. Do you want to continue? - + The printer uses a different paper size than the drawing. +Do you want to continue? @@ -706,12 +708,12 @@ Do you want to continue? %1%2 %3 (%4) - + %1%2 %3 (%4) Insert new %1%2 %3 (%4) drawing - + Insert new %1%2 %3 (%4) drawing @@ -764,7 +766,7 @@ Do you want to continue? No page found - + No page found @@ -773,12 +775,12 @@ Do you want to continue? Create a page first. - + Create a page first. Select exactly one Part object. - + Select exactly one Part object. @@ -789,7 +791,7 @@ Do you want to continue? SVG (*.svg) - + SVG (*.svg) SVG(*.svg) diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_it.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_it.qm index 6137db201b..f7be2bc65e 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_it.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_it.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_it.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_it.ts index bf56d971a0..b17cb2ed47 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_it.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_it.ts @@ -36,7 +36,7 @@ Inserts a clip group in the active drawing - Iserisce un gruppo clip nel disegno attivo + Inserisce un gruppo clip nel disegno attivo @@ -49,13 +49,13 @@ &Draft View - + Vista &Draft Inserts a Draft view of the selected object(s) in the active drawing - + Inserisce nel disegno attivo una vista Draft dell'oggetto(i) selezionato @@ -207,7 +207,7 @@ &Symbol - &Symbol + &Simbolo @@ -311,26 +311,26 @@ Different orientation - + Orientamento diverso The printer uses a different orientation than the drawing. Do you want to continue? - + La stampante utilizza un orientamento diverso rispetto al disegno. Si desidera continuare? Different paper size - + Formato carta diverso The printer uses a different paper size than the drawing. Do you want to continue? - + La stampante utilizza un formato di carta diverso rispetto al disegno. Si desidera continuare? @@ -706,12 +706,12 @@ Do you want to continue? %1%2 %3 (%4) - + %1%2 %3 (%4) Insert new %1%2 %3 (%4) drawing - + Inserire il nuovo disegno %1%2 %3 (%4) @@ -764,7 +764,7 @@ Do you want to continue? No page found - + Nessuna pagina trovata @@ -773,12 +773,12 @@ Do you want to continue? Create a page first. - + Prima creare una pagina. Select exactly one Part object. - + Selezionare un solo oggetto Parte. @@ -789,7 +789,7 @@ Do you want to continue? SVG (*.svg) - + SVG (*.svg) SVG(*.svg) diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ja.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ja.qm index dd83758224..89143d5186 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ja.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ja.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ja.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ja.ts index 799d4afb46..93da388f7b 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ja.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ja.ts @@ -49,13 +49,13 @@ &Draft View - + ドラフト・ビュー (&D) Inserts a Draft view of the selected object(s) in the active drawing - + アクティブな図面に選択オブジェクトのドラフト・ビューを挿入 @@ -311,26 +311,26 @@ Different orientation - + Different orientation The printer uses a different orientation than the drawing. Do you want to continue? - + プリンターでは、図面と異なる印刷方向を使用します。続行しますか？ Different paper size - + 別の用紙サイズ The printer uses a different paper size than the drawing. Do you want to continue? - + プリンターでは、図面とは異なる用紙サイズを使用します。続行しますか？ @@ -359,22 +359,22 @@ Do you want to continue? Top left x / y - Top left x / y + 左上のx / y Spacing dx / dy - Spacing dx / dy + 間隔 dx/dy Axis out and right - Axis out and right + 座標軸を外側右部へ Vertical tilt - Vertical tilt + 垂直方向の傾き @@ -429,33 +429,33 @@ Do you want to continue? Trimetric - トリメトリック + 不等角投影図法 Scale - Scale + 拡大縮小 View projection - View projection + ビュー投影 Axis aligned up - Axis aligned up + 座標軸を上部に配置 Flip - Flip + 反転 Trimetric - Trimetric + 不等角投影図法 @@ -475,12 +475,12 @@ Do you want to continue? View from: - View from: + 視点： Axis aligned right: - Axis aligned right: + 座標軸を右部に配置： Primary View @@ -702,17 +702,17 @@ Do you want to continue? Insert new %1%2 %3 drawing - Insert new %1%2 %3 drawing + 新しい %1 %2 %3 の図面を挿入 %1%2 %3 (%4) - + %1%2 %3 (%4) Insert new %1%2 %3 (%4) drawing - + Insert new %1%2 %3 (%4) drawing @@ -765,7 +765,7 @@ Do you want to continue? No page found - + ページが見つかりません @@ -774,12 +774,12 @@ Do you want to continue? Create a page first. - + 最初にページを作成してください Select exactly one Part object. - + 部品オブジェクトを1 つだけ選択して下さい。 @@ -790,7 +790,7 @@ Do you want to continue? SVG (*.svg) - + SVG (*.svg) SVG(*.svg) @@ -839,19 +839,19 @@ Do you want to continue? Make axonometric... - Make axonometric... + 不等角投影図を作成... Edit axonometric settings... - Edit axonometric settings... + 不等角投影図設定を編集 Make orthographic - Make orthographic + 正投影図を作成 diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_nl.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_nl.qm index b733aa7e77..619b64fc14 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_nl.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_nl.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_nl.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_nl.ts index 4e2dea9285..b35cc4f188 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_nl.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_nl.ts @@ -49,13 +49,13 @@ &Draft View - + &Draft View Inserts a Draft view of the selected object(s) in the active drawing - + Inserts a Draft view of the selected object(s) in the active drawing @@ -311,26 +311,28 @@ Different orientation - + Different orientation The printer uses a different orientation than the drawing. Do you want to continue? - + The printer uses a different orientation than the drawing. +Do you want to continue? Different paper size - + Different paper size The printer uses a different paper size than the drawing. Do you want to continue? - + The printer uses a different paper size than the drawing. +Do you want to continue? @@ -419,7 +421,7 @@ Do you want to continue? Isometric - Isometric + Isometrisch @@ -572,7 +574,7 @@ Do you want to continue? Axonometric - Axonometric + Axonometrisch @@ -686,12 +688,12 @@ Do you want to continue? Landscape - Landscape + Liggend Portrait - Portrait + Staand @@ -706,12 +708,12 @@ Do you want to continue? %1%2 %3 (%4) - + %1%2 %3 (%4) Insert new %1%2 %3 (%4) drawing - + Insert new %1%2 %3 (%4) drawing @@ -764,7 +766,7 @@ Do you want to continue? No page found - + No page found @@ -773,12 +775,12 @@ Do you want to continue? Create a page first. - + Create a page first. Select exactly one Part object. - + Select exactly one Part object. @@ -789,7 +791,7 @@ Do you want to continue? SVG (*.svg) - + SVG (*.svg) SVG(*.svg) @@ -838,7 +840,7 @@ Do you want to continue? Make axonometric... - Make axonometric... + Axonometrisch maken... diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_no.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_no.qm index 70eb4152d9..d448e0c296 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_no.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_no.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_no.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_no.ts index ed1efd3eac..ead225b77c 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_no.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_no.ts @@ -49,13 +49,13 @@ &Draft View - + &Draft View Inserts a Draft view of the selected object(s) in the active drawing - + Inserts a Draft view of the selected object(s) in the active drawing @@ -311,26 +311,28 @@ Different orientation - + Different orientation The printer uses a different orientation than the drawing. Do you want to continue? - + The printer uses a different orientation than the drawing. +Do you want to continue? Different paper size - + Different paper size The printer uses a different paper size than the drawing. Do you want to continue? - + The printer uses a different paper size than the drawing. +Do you want to continue? @@ -706,12 +708,12 @@ Do you want to continue? %1%2 %3 (%4) - + %1%2 %3 (%4) Insert new %1%2 %3 (%4) drawing - + Insert new %1%2 %3 (%4) drawing @@ -764,7 +766,7 @@ Do you want to continue? No page found - + No page found @@ -773,12 +775,12 @@ Do you want to continue? Create a page first. - + Create a page first. Select exactly one Part object. - + Select exactly one Part object. @@ -789,7 +791,7 @@ Do you want to continue? SVG (*.svg) - + SVG (*.svg) SVG(*.svg) diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.qm index 47368f1c23..b1d00c4756 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.ts index aa220e2753..c1f7d472ed 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.ts @@ -17,7 +17,7 @@ Inserts an Annotation view in the active drawing - Wstawia widok adnotacji w aktywnym rysunku + Wstawia widok Adnotacji w aktywnym rysunku @@ -49,13 +49,13 @@ &Draft View - + &Draft View Inserts a Draft view of the selected object(s) in the active drawing - + Inserts a Draft view of the selected object(s) in the active drawing @@ -194,7 +194,7 @@ Project shape onto a user-defined plane - Rzut obwiedni na płaszczyznę zdefiniowaną przez użytkownika + Rzut kształtu na płaszczyznę zdefiniowaną przez użytkownika @@ -213,7 +213,7 @@ Inserts a symbol from a svg file in the active drawing - Inserts a symbol from a svg file in the active drawing + Wstaw symbol z pliku SVG do aktywnego rysunku @@ -226,7 +226,7 @@ &Outline - &Zarys + &Obwiednia @@ -236,7 +236,7 @@ &OpenGL - OpenGL + &OpenGL @@ -246,7 +246,7 @@ &High Quality Antialiasing - &Wygładzanie wysokiej jakości + &Antyaliasing wysokiej jakości @@ -311,26 +311,28 @@ Different orientation - + Different orientation The printer uses a different orientation than the drawing. Do you want to continue? - + The printer uses a different orientation than the drawing. +Do you want to continue? Different paper size - + Different paper size The printer uses a different paper size than the drawing. Do you want to continue? - + The printer uses a different paper size than the drawing. +Do you want to continue? @@ -354,27 +356,27 @@ Do you want to continue? Right click for axonometric settings - Right click for axonometric settings + Wciśnij prawy przycisk myszy, aby ustawić aksonometrię Top left x / y - Top left x / y + Lewy górny x / y Spacing dx / dy - Spacing dx / dy + Odstęp dx / dy Axis out and right - Axis out and right + Oś na zewnątrz i prawo Vertical tilt - Vertical tilt + Pionowe pochylenie @@ -419,43 +421,43 @@ Do you want to continue? Isometric - Isometric + Izometryczny Dimetric - Dimetric + Dimetryczny Trimetric - Trimetric + Trymetryczny Scale - Scale + Skala View projection - View projection + Zobacz rzut Axis aligned up - Axis aligned up + Wyrównanie osi Flip - Flip + Obróć Trimetric - Trimetric + Trymetryczny @@ -475,12 +477,12 @@ Do you want to continue? View from: - View from: + Widok z: Axis aligned right: - Axis aligned right: + Osie wyrównane do prawej strony: Primary View @@ -590,7 +592,7 @@ Do you want to continue? Visible sewn edges - Widoczne wszyte krawędzie + Widoczne przerywane krawędzie @@ -615,7 +617,7 @@ Do you want to continue? Hidden sewn edges - Ukryte wszyte krawędzie + Ukryte przerywane krawędzie @@ -630,7 +632,7 @@ Do you want to continue? Project shapes - Rzutowanie obwiedni + Rzutowanie kształtów @@ -686,32 +688,32 @@ Do you want to continue? Landscape - Landscape + Poziomy Portrait - Portrait + Pionowy %1%2 %3 - %1%2 %3 + %1 %2 %3 Insert new %1%2 %3 drawing - Insert new %1%2 %3 drawing + Wstaw nowy rysunek %1 %2 %3 %1%2 %3 (%4) - + %1%2 %3 (%4) Insert new %1%2 %3 (%4) drawing - + Insert new %1%2 %3 (%4) drawing @@ -743,7 +745,7 @@ Do you want to continue? Select a Part object. - Wybierz stronę. + Wybierz obiekt Części. No page to insert @@ -764,7 +766,7 @@ Do you want to continue? No page found - + No page found @@ -773,27 +775,27 @@ Do you want to continue? Create a page first. - + Create a page first. Select exactly one Part object. - + Select exactly one Part object. Select one Page object. - Wybierz jedną Stronę + Wybierz jeden obiekt Strony. SVG (*.svg) - + SVG (*.svg) SVG(*.svg) - SVG (*. svg) + SVG(*.svg) @@ -803,7 +805,7 @@ Do you want to continue? Export page - Wyślij stronę + Eksportuj stronę @@ -838,19 +840,19 @@ Do you want to continue? Make axonometric... - Make axonometric... + Stwórz aksonometrię... Edit axonometric settings... - Edit axonometric settings... + Edytuj ustawienia aksonometrii... Make orthographic - Make orthographic + Stwórz rzut (ortograficzny) diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-BR.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-BR.qm index 4247694c4a..f90c705bc6 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-BR.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-BR.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-BR.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-BR.ts index 0f71f07a0d..db78d5931d 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-BR.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-BR.ts @@ -17,7 +17,7 @@ Inserts an Annotation view in the active drawing - Inserir uma anotação no desenho ativo + Insere uma Anotação no desenho ativo @@ -49,13 +49,13 @@ &Draft View - + Vista &Traço Inserts a Draft view of the selected object(s) in the active drawing - + Insere uma vista produzida pelo módulo Traço do(s) objeto(s) selecionado(s) na folha ativa @@ -74,7 +74,7 @@ Export a page to an SVG file - Exportar página para formato SVG + Exportar página para um arquivo SVG @@ -311,26 +311,26 @@ Different orientation - + Orientação diferente The printer uses a different orientation than the drawing. Do you want to continue? - + A impressora utiliza uma orientação diferente do que o desenho. Deseja continuar? Different paper size - + Tamanho de papel diferente The printer uses a different paper size than the drawing. Do you want to continue? - + A impressora usa um tamanho de papel diferente do que o desenho. Deseja continuar? @@ -706,12 +706,12 @@ Do you want to continue? %1%2 %3 (%4) - + %1%2 %3 (%4) Insert new %1%2 %3 (%4) drawing - + Inserir novo desenho %1%2 %3 (%4) @@ -764,7 +764,7 @@ Do you want to continue? No page found - + Nenhuma página encontrada @@ -773,12 +773,12 @@ Do you want to continue? Create a page first. - + Primeiro, crie uma página. Select exactly one Part object. - + Selecione exatamente uma peça. @@ -789,7 +789,7 @@ Do you want to continue? SVG (*.svg) - + SVG (*.svg) SVG(*.svg) diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-PT.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-PT.qm index 09b5c2b105..e8993960bc 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-PT.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-PT.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-PT.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-PT.ts index 8d61f52b5b..e5c389fd21 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-PT.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-PT.ts @@ -6,7 +6,7 @@ Drawing - Desenho + Desenho (layout) @@ -17,7 +17,7 @@ Inserts an Annotation view in the active drawing - Insere uma visualização da Anotação no desenho ativo + Insere uma Anotação no desenho (folha) ativo @@ -25,7 +25,7 @@ Drawing - Desenho + Desenho (layout) @@ -44,18 +44,18 @@ Drawing - Desenho + Desenho (layout) &Draft View - + &Vista Draft Inserts a Draft view of the selected object(s) in the active drawing - + Insere uma vista Draft dos objetos selecionados na folha ativa @@ -82,7 +82,7 @@ Drawing - Desenho + Desenho (layout) @@ -96,13 +96,13 @@ Drawing - Desenho + Desenho (layout) Insert new drawing - Inserir novo desenho + Inserir novo desenho (folha) @@ -110,12 +110,12 @@ Drawing - Desenho + Desenho (layout) Insert view in drawing - Inserir uma visualização no desenho + Inserir uma vista no desenho (folha) @@ -128,7 +128,7 @@ Drawing - Desenho + Desenho (layout) @@ -146,7 +146,7 @@ Drawing - Desenho + Desenho (layout) @@ -165,7 +165,7 @@ Drawing - Desenho + Desenho (layout) @@ -183,18 +183,18 @@ Drawing - Desenho + Desenho (layout) Project shape... - Forma de projeto... + Projetar forma... Project shape onto a user-defined plane - Forma de projeto num plano definido pelo utilizador + Projeta forma sobre um plano definido pelo utilizador @@ -202,7 +202,7 @@ Drawing - Desenho + Desenho (layout) @@ -311,26 +311,26 @@ Different orientation - + Orientação diferente The printer uses a different orientation than the drawing. Do you want to continue? - + A impressora utiliza uma orientação diferente do desenho. Deseja continuar? Different paper size - + Tamanho de papel diferente The printer uses a different paper size than the drawing. Do you want to continue? - + A impressora usa um tamanho de papel diferente do desenho. Deseja continuar? @@ -439,7 +439,7 @@ Do you want to continue? View projection - Vista de projeção + Visualizar projeção @@ -488,7 +488,7 @@ Do you want to continue? Front - Front + Frente Right @@ -500,7 +500,7 @@ Do you want to continue? Left - Left + Esquerda Top @@ -508,7 +508,7 @@ Do you want to continue? Bottom - Bottom + De baixo - Rotate @@ -630,7 +630,7 @@ Do you want to continue? Project shapes - Formas de projeto + Projetar formas @@ -686,12 +686,12 @@ Do you want to continue? Landscape - Paisagem + Horizontal Portrait - Retrato + Vertical @@ -701,17 +701,17 @@ Do you want to continue? Insert new %1%2 %3 drawing - Inserir novo desenho %1%2 %3 + Inserir novo desenho %1%2 %3 (folha) %1%2 %3 (%4) - + %1%2 %3 (%4) Insert new %1%2 %3 (%4) drawing - + Inserir novo desenho %1%2 %3 (%4) Folha @@ -764,7 +764,7 @@ Do you want to continue? No page found - + Nenhuma página encontrada @@ -773,12 +773,12 @@ Do you want to continue? Create a page first. - + Primeiro, crie uma página. Select exactly one Part object. - + Selecione exatamente uma peça (Part). @@ -789,7 +789,7 @@ Do you want to continue? SVG (*.svg) - + SVG (*.svg) SVG(*.svg) @@ -812,7 +812,7 @@ Do you want to continue? Front - Front + Frente Back @@ -824,7 +824,7 @@ Do you want to continue? Left - Left + Esquerda Top @@ -832,7 +832,7 @@ Do you want to continue? Bottom - Bottom + De baixo @@ -850,7 +850,7 @@ Do you want to continue? Make orthographic - Make orthographic + Tornar ortográfico @@ -858,7 +858,7 @@ Do you want to continue? Drawing - Desenho + Desenho (layout) diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ro.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ro.qm index 9ae8a3fa2e..8957cabd51 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ro.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ro.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ro.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ro.ts index a724ffafcd..502345ad77 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ro.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ro.ts @@ -49,13 +49,13 @@ &Draft View - + &Draft View Inserts a Draft view of the selected object(s) in the active drawing - + Inserts a Draft view of the selected object(s) in the active drawing @@ -207,13 +207,13 @@ &Symbol - &Symbol + &Simbol Inserts a symbol from a svg file in the active drawing - Inserts a symbol from a svg file in the active drawing + Inserează un simbol dintr-un fișier svg în desenul activ @@ -311,26 +311,28 @@ Different orientation - + Different orientation The printer uses a different orientation than the drawing. Do you want to continue? - + The printer uses a different orientation than the drawing. +Do you want to continue? Different paper size - + Different paper size The printer uses a different paper size than the drawing. Do you want to continue? - + The printer uses a different paper size than the drawing. +Do you want to continue? @@ -354,27 +356,27 @@ Do you want to continue? Right click for axonometric settings - Right click for axonometric settings + Click dreapta pentru configurări axonometrice Top left x / y - Top left x / y + Sus stânga x / y Spacing dx / dy - Spacing dx / dy + Distanțează dx / dy Axis out and right - Axis out and right + Axa afară și dreaptă Vertical tilt - Vertical tilt + Înclinare verticală @@ -419,7 +421,7 @@ Do you want to continue? Isometric - Isometric + Izometrică @@ -434,23 +436,23 @@ Do you want to continue? Scale - Scale + Scală View projection - View projection + Vizualizează proiecția Axis aligned up - Axis aligned up + Axa aliniată sus Flip - Flip + Întoarce @@ -475,12 +477,12 @@ Do you want to continue? View from: - View from: + Vizualizare de la: Axis aligned right: - Axis aligned right: + Axa aliniată la dreapta: Primary View @@ -686,12 +688,12 @@ Do you want to continue? Landscape - Landscape + Peisaj Portrait - Portrait + Portret @@ -701,17 +703,17 @@ Do you want to continue? Insert new %1%2 %3 drawing - Insert new %1%2 %3 drawing + Inserează un nou %1%2%3 desen %1%2 %3 (%4) - + %1%2 %3 (%4) Insert new %1%2 %3 (%4) drawing - + Insert new %1%2 %3 (%4) drawing @@ -764,7 +766,7 @@ Do you want to continue? No page found - + No page found @@ -773,12 +775,12 @@ Do you want to continue? Create a page first. - + Create a page first. Select exactly one Part object. - + Select exactly one Part object. @@ -789,7 +791,7 @@ Do you want to continue? SVG (*.svg) - + SVG (*.svg) SVG(*.svg) @@ -838,19 +840,19 @@ Do you want to continue? Make axonometric... - Make axonometric... + Fă axonometric... Edit axonometric settings... - Edit axonometric settings... + Editare configurări axonometrice... Make orthographic - Make orthographic + Fă ortografic diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ru.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ru.qm index c5335c8f2e..30a89433f3 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ru.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ru.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ru.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ru.ts index d91e413075..8600a9f80f 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ru.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ru.ts @@ -49,13 +49,13 @@ &Draft View - + &Draft View Inserts a Draft view of the selected object(s) in the active drawing - + Inserts a Draft view of the selected object(s) in the active drawing @@ -207,13 +207,13 @@ &Symbol - &Symbol + &Символ Inserts a symbol from a svg file in the active drawing - Inserts a symbol from a svg file in the active drawing + Добавить символы из *.svg файла в активный чертёж @@ -311,26 +311,28 @@ Different orientation - + Different orientation The printer uses a different orientation than the drawing. Do you want to continue? - + The printer uses a different orientation than the drawing. +Do you want to continue? Different paper size - + Different paper size The printer uses a different paper size than the drawing. Do you want to continue? - + The printer uses a different paper size than the drawing. +Do you want to continue? @@ -374,7 +376,7 @@ Do you want to continue? Vertical tilt - Vertical tilt + Вертикальный наклон @@ -475,7 +477,7 @@ Do you want to continue? View from: - View from: + Вид с: @@ -686,12 +688,12 @@ Do you want to continue? Landscape - Landscape + Ландшафтная Portrait - Portrait + Портретная @@ -706,12 +708,12 @@ Do you want to continue? %1%2 %3 (%4) - + %1%2 %3 (%4) Insert new %1%2 %3 (%4) drawing - + Insert new %1%2 %3 (%4) drawing @@ -764,7 +766,7 @@ Do you want to continue? No page found - + Страницы не найдены @@ -773,12 +775,12 @@ Do you want to continue? Create a page first. - + Сначала создайте страницу. Select exactly one Part object. - + Выберите ровно один объект-деталь. @@ -789,7 +791,7 @@ Do you want to continue? SVG (*.svg) - + SVG (*.svg) SVG(*.svg) diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sr.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sr.qm new file mode 100644 index 0000000000..6d4652e4e1 Binary files /dev/null and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sr.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sr.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sr.ts new file mode 100644 index 0000000000..28c9e4a3e1 --- /dev/null +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sr.ts @@ -0,0 +1,866 @@ + + + + + CmdDrawingAnnotation + + + Drawing + Цртеж + + + + &Annotation + &Опиc + + + + + Inserts an Annotation view in the active drawing + Додај видни Опиc активном цртежу + + + + CmdDrawingClip + + + Drawing + Цртеж + + + + &Clip + &Clip + + + + + Inserts a clip group in the active drawing + Inserts a clip group in the active drawing + + + + CmdDrawingDraftView + + + Drawing + Цртеж + + + + &Draft View + &Draft View + + + + + Inserts a Draft view of the selected object(s) in the active drawing + Inserts a Draft view of the selected object(s) in the active drawing + + + + CmdDrawingExportPage + + + File + Датотека + + + + &Export page... + Извоз странице... + + + + + Export a page to an SVG file + Извези страницу у 'SVG' датотеку + + + + CmdDrawingNewA3Landscape + + + Drawing + Цртеж + + + + + Insert new A3 landscape drawing + Убаците Нови А3 пејзажни цртеж + + + + CmdDrawingNewPage + + + Drawing + Цртеж + + + + + Insert new drawing + Уметни нови цртеж + + + + CmdDrawingNewView + + + Drawing + Цртеж + + + + Insert view in drawing + Убаците приказ у цртеж + + + + Insert a new View of a Part in the active drawing + Убаците нови поглед дела у активном цртежу + + + + CmdDrawingOpen + + + Drawing + Цртеж + + + + Open SVG... + Отвори 'SVG' ... + + + + Open a scalable vector graphic + Отворите 'скалабилну векторску графику' + + + + CmdDrawingOpenBrowserView + + + Drawing + Цртеж + + + + Open &browser view + Отвори &поглед у прегледачу + + + + + Opens the selected page in a browser view + Opens the selected page in a browser view + + + + CmdDrawingOrthoViews + + + Drawing + Цртеж + + + + Insert orthographic views + Insert orthographic views + + + + Insert an orthographic projection of a part in the active drawing + Insert an orthographic projection of a part in the active drawing + + + + CmdDrawingProjectShape + + + Drawing + Цртеж + + + + Project shape... + Project shape... + + + + + Project shape onto a user-defined plane + Project shape onto a user-defined plane + + + + CmdDrawingSymbol + + + Drawing + Цртеж + + + + &Symbol + &Симбол + + + + + Inserts a symbol from a svg file in the active drawing + Inserts a symbol from a svg file in the active drawing + + + + DrawingGui::DrawingView + + + &Background + Позадина &amp; + + + + &Outline + &amp; Оивичење + + + + &Native + Матерњи &amp; + + + + &OpenGL + &'OpenGL' + + + + &Image + &Слика + + + + &High Quality Antialiasing + &Антиалиасинг високог квалитета + + + + Open SVG File + Отвори 'SVG' датотеку + + + + Could not open file '%1'. + Не могу да отворим датотеку "%1". + + + + &Renderer + Приказивач + + + + Export PDF + Извоз у ПДФ-у + + + + PDF file (*.pdf) + ПДФ датотеке (*. пдф) + + + + Page sizes + Величина странице + + + + A0 + A0 + + + + A1 + A1 + + + + A2 + A2 + + + + A3 + A3 + + + + A4 + A4 + + + + A5 + A5 + + + + Different orientation + Другачија оријентација + + + + The printer uses a different orientation than the drawing. +Do you want to continue? + The printer uses a different orientation than the drawing. +Do you want to continue? + + + + + Different paper size + Другачија величина папира + + + + + The printer uses a different paper size than the drawing. +Do you want to continue? + The printer uses a different paper size than the drawing. +Do you want to continue? + + + + DrawingGui::TaskOrthoViews + + + Orthographic Projection + Orthographic Projection + + + + + + + + + + + + + + + Right click for axonometric settings + Right click for axonometric settings + + + + Top left x / y + Top left x / y + + + + Spacing dx / dy + Spacing dx / dy + + + + Axis out and right + Axis out and right + + + + Vertical tilt + Vertical tilt + + + + + X +ve + X +ve + + + + + + Y +ve + Y +ve + + + + + + Z +ve + Z +ve + + + + + X -ve + X -ve + + + + + + Y -ve + Y -ve + + + + + + Z -ve + Z -ve + + + + Isometric + Isometric + + + + Dimetric + Dimetric + + + + Trimetric + Trimetric + + + + Scale + Scale + + + + View projection + View projection + + + + Axis aligned up + Axis aligned up + + + + + Flip + Flip + + + + Trimetric + Trimetric + + + + Projection + Пројекција + + + + Third Angle + Трећи угао + + + + First Angle + Први угао + + + + View from: + View from: + + + + Axis aligned right: + Axis aligned right: + + + Primary View + Primary View + + + Front + Front + + + Right + Деcно + + + Back + Назад + + + Left + Лево + + + Top + Горе + + + Bottom + Доле + + + - Rotate + - Rotate + + + 90 + 90 + + + 180 + 180 + + + 270 + 270 + + + + Primary view + Primary view + + + + Secondary Views + Secondary Views + + + + General + Glavno + + + + Auto scale / position + Auto scale / position + + + + Scale + увеличај/умањи + + + Primary x / y + Primary x / y + + + Secondary dx / dy + Secondary dx / dy + + + + Show hidden + Прикажи сакривено + + + + Show smooth + Прикажи глатко + + + + Axonometric + Axonometric + + + + DrawingGui::TaskProjection + + + Visible sharp edges + Visible sharp edges + + + + Visible smooth edges + Visible smooth edges + + + + Visible sewn edges + Visible sewn edges + + + + Visible outline edges + Visible outline edges + + + + Visible isoparameters + Visible isoparameters + + + + Hidden sharp edges + Hidden sharp edges + + + + Hidden smooth edges + Hidden smooth edges + + + + Hidden sewn edges + Hidden sewn edges + + + + Hidden outline edges + Hidden outline edges + + + + Hidden isoparameters + Hidden isoparameters + + + + Project shapes + Project shapes + + + + Drawing_NewPage + + A0 landscape + A0 landscape + + + Insert new A0 landscape drawing + Insert new A0 landscape drawing + + + A1 landscape + A1 landscape + + + Insert new A1 landscape drawing + Insert new A1 landscape drawing + + + A2 landscape + A2 landscape + + + Insert new A2 landscape drawing + Insert new A2 landscape drawing + + + A3 landscape + A3 landscape + + + Insert new A3 landscape drawing + Убаците Нови А3 пејзажни цртеж + + + A4 landscape + A4 landscape + + + Insert new A4 landscape drawing + Insert new A4 landscape drawing + + + Insert new A%1 landscape drawing + Insert new A%1 landscape drawing + + + A%1 landscape + A%1 landscape + + + + Landscape + Пејзаж + + + + Portrait + Портрет + + + + %1%2 %3 + %1%2 %3 + + + + Insert new %1%2 %3 drawing + Insert new %1%2 %3 drawing + + + + %1%2 %3 (%4) + %1%2 %3 (%4) + + + + Insert new %1%2 %3 (%4) drawing + Insert new %1%2 %3 (%4) drawing + + + + QObject + + + + Choose an SVG file to open + Изаберите 'SVG' датотеку за отварање + + + Drawing viewer + Прегледач цртежа + + + + + Scalable Vector Graphics (*.svg *.svgz) + Скалабилна векторска графика (*.svg*.svgz) + + + + + + + Wrong selection + Погрешан избор + + + + Select a Part object. + Изаберите део објекта. + + + No page to insert + Нема страница за уметање + + + Create a page to insert. + Направи страницу за уметање + + + Create a page to insert views into. + Create a page to insert views into. + + + + + + + + No page found + No page found + + + + + + + + Create a page first. + Create a page first. + + + + Select exactly one Part object. + Select exactly one Part object. + + + + + Select one Page object. + Изаберите објекат једне странице + + + + SVG (*.svg) + SVG (*.svg) + + + SVG(*.svg) + датотека 'SVG'(*.svg) + + + + All Files (*.*) + Све датотеке (*.*) + + + + Export page + Извоз странице + + + + Show drawing + Прикажи цртеж + + + Front + Front + + + Back + Назад + + + Right + Деcно + + + Left + Лево + + + Top + Горе + + + Bottom + Доле + + + + + Make axonometric... + Make axonometric... + + + + + Edit axonometric settings... + Edit axonometric settings... + + + + + Make orthographic + Make orthographic + + + + Workbench + + + Drawing + Цртеж + + + diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sv-SE.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sv-SE.qm index c6ee055051..492ec47f5a 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sv-SE.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sv-SE.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sv-SE.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sv-SE.ts index 5c1e72875f..027543f64a 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sv-SE.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sv-SE.ts @@ -49,13 +49,13 @@ &Draft View - + &Draft View Inserts a Draft view of the selected object(s) in the active drawing - + Inserts a Draft view of the selected object(s) in the active drawing @@ -213,7 +213,7 @@ Inserts a symbol from a svg file in the active drawing - Inserts a symbol from a svg file in the active drawing + Infogar en symbol från en svg-fil i den aktiva ritningen @@ -311,26 +311,28 @@ Different orientation - + Different orientation The printer uses a different orientation than the drawing. Do you want to continue? - + The printer uses a different orientation than the drawing. +Do you want to continue? Different paper size - + Different paper size The printer uses a different paper size than the drawing. Do you want to continue? - + The printer uses a different paper size than the drawing. +Do you want to continue? @@ -354,27 +356,27 @@ Do you want to continue? Right click for axonometric settings - Right click for axonometric settings + Högerklicka för axonometrisk inställningar Top left x / y - Top left x / y + Övre vänstra x / y Spacing dx / dy - Spacing dx / dy + Delning dx / dy Axis out and right - Axis out and right + Axel ut och höger Vertical tilt - Vertical tilt + Vertikal tilt @@ -419,7 +421,7 @@ Do you want to continue? Isometric - Isometric + Isometrisk @@ -429,17 +431,17 @@ Do you want to continue? Trimetric - Trimetric + Trimetrisk Scale - Scale + Skala View projection - View projection + Visa projektion @@ -450,12 +452,12 @@ Do you want to continue? Flip - Flip + Vänd Trimetric - Trimetric + Trimetrisk @@ -475,7 +477,7 @@ Do you want to continue? View from: - View from: + Visa från: @@ -686,12 +688,12 @@ Do you want to continue? Landscape - Landscape + Landskap Portrait - Portrait + Porträtt @@ -701,17 +703,17 @@ Do you want to continue? Insert new %1%2 %3 drawing - Insert new %1%2 %3 drawing + Infoga ny %1%2 %3 ritning %1%2 %3 (%4) - + %1%2 %3 (%4) Insert new %1%2 %3 (%4) drawing - + Insert new %1%2 %3 (%4) drawing @@ -764,7 +766,7 @@ Do you want to continue? No page found - + No page found @@ -773,12 +775,12 @@ Do you want to continue? Create a page first. - + Create a page first. Select exactly one Part object. - + Select exactly one Part object. @@ -789,7 +791,7 @@ Do you want to continue? SVG (*.svg) - + SVG (*.svg) SVG(*.svg) diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_uk.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_uk.qm index 09d0f27b4b..192489f8af 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_uk.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_uk.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_uk.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_uk.ts index c748efd2d5..7e4e72c700 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_uk.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_uk.ts @@ -49,13 +49,13 @@ &Draft View - + &Draft View Inserts a Draft view of the selected object(s) in the active drawing - + Inserts a Draft view of the selected object(s) in the active drawing @@ -213,7 +213,7 @@ Inserts a symbol from a svg file in the active drawing - Inserts a symbol from a svg file in the active drawing + Вставити символ з svg файлу в креслення, що редагується @@ -311,26 +311,28 @@ Different orientation - + Different orientation The printer uses a different orientation than the drawing. Do you want to continue? - + The printer uses a different orientation than the drawing. +Do you want to continue? Different paper size - + Different paper size The printer uses a different paper size than the drawing. Do you want to continue? - + The printer uses a different paper size than the drawing. +Do you want to continue? @@ -374,7 +376,7 @@ Do you want to continue? Vertical tilt - Vertical tilt + Вертикальний нахил @@ -419,27 +421,27 @@ Do you want to continue? Isometric - Isometric + Ізометричний Dimetric - Dimetric + Диметрія Trimetric - Trimetric + Триметрія Scale - Scale + Масштаб View projection - View projection + Переглянути проекцію @@ -455,7 +457,7 @@ Do you want to continue? Trimetric - Trimetric + Триметрія @@ -475,7 +477,7 @@ Do you want to continue? View from: - View from: + Вигляд з: @@ -580,22 +582,22 @@ Do you want to continue? Visible sharp edges - Видимі гострі краї + Видимі гострі ребра Visible smooth edges - Видимі згладжені краї + Видимі згладжені ребра Visible sewn edges - Видимі зшиті краї + Видимі зшиті ребра Visible outline edges - Видимі контурні краї + Видимі контурні ребра @@ -605,22 +607,22 @@ Do you want to continue? Hidden sharp edges - Приховані гострі краї + Приховані гострі ребра Hidden smooth edges - Приховані згладжені краї + Приховані згладжені ребра Hidden sewn edges - Приховані зшиті краї + Приховані зшиті ребра Hidden outline edges - Приховані контурні краї + Приховані контурні ребра @@ -686,32 +688,32 @@ Do you want to continue? Landscape - Landscape + Альбомна Portrait - Portrait + Портретна %1%2 %3 - %1%2 %3 + %1 %2 %3 Insert new %1%2 %3 drawing - Insert new %1%2 %3 drawing + Вставити нове %1%2 %3 креслення %1%2 %3 (%4) - + %1%2 %3 (%4) Insert new %1%2 %3 (%4) drawing - + Insert new %1%2 %3 (%4) drawing @@ -764,7 +766,7 @@ Do you want to continue? No page found - + No page found @@ -773,12 +775,12 @@ Do you want to continue? Create a page first. - + Create a page first. Select exactly one Part object. - + Select exactly one Part object. @@ -789,7 +791,7 @@ Do you want to continue? SVG (*.svg) - + SVG (*.svg) SVG(*.svg) @@ -838,19 +840,19 @@ Do you want to continue? Make axonometric... - Make axonometric... + Зробити аксонометрію... Edit axonometric settings... - Edit axonometric settings... + Редагувати налаштування аксонометрії... Make orthographic - Make orthographic + Зробити ортогональну проекцію diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-CN.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-CN.qm index 1691ed0497..7873902c30 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-CN.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-CN.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-CN.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-CN.ts index 4a4751ca01..67d2f96be6 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-CN.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-CN.ts @@ -49,13 +49,13 @@ &Draft View - + &Draft View Inserts a Draft view of the selected object(s) in the active drawing - + Inserts a Draft view of the selected object(s) in the active drawing @@ -311,26 +311,28 @@ Different orientation - + Different orientation The printer uses a different orientation than the drawing. Do you want to continue? - + The printer uses a different orientation than the drawing. +Do you want to continue? Different paper size - + Different paper size The printer uses a different paper size than the drawing. Do you want to continue? - + The printer uses a different paper size than the drawing. +Do you want to continue? @@ -706,12 +708,12 @@ Do you want to continue? %1%2 %3 (%4) - + %1%2 %3 (%4) Insert new %1%2 %3 (%4) drawing - + Insert new %1%2 %3 (%4) drawing @@ -764,7 +766,7 @@ Do you want to continue? No page found - + No page found @@ -773,12 +775,12 @@ Do you want to continue? Create a page first. - + Create a page first. Select exactly one Part object. - + Select exactly one Part object. @@ -789,7 +791,7 @@ Do you want to continue? SVG (*.svg) - + SVG (*.svg) SVG(*.svg) diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-TW.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-TW.qm index 9ec14c1d85..6f3274455b 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-TW.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-TW.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-TW.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-TW.ts index 02be4c6239..0ba4a90af2 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-TW.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-TW.ts @@ -49,13 +49,13 @@ &Draft View - + &Draft View Inserts a Draft view of the selected object(s) in the active drawing - + Inserts a Draft view of the selected object(s) in the active drawing @@ -311,26 +311,28 @@ Different orientation - + Different orientation The printer uses a different orientation than the drawing. Do you want to continue? - + The printer uses a different orientation than the drawing. +Do you want to continue? Different paper size - + Different paper size The printer uses a different paper size than the drawing. Do you want to continue? - + The printer uses a different paper size than the drawing. +Do you want to continue? @@ -706,12 +708,12 @@ Do you want to continue? %1%2 %3 (%4) - + %1%2 %3 (%4) Insert new %1%2 %3 (%4) drawing - + Insert new %1%2 %3 (%4) drawing @@ -764,7 +766,7 @@ Do you want to continue? No page found - + No page found @@ -773,12 +775,12 @@ Do you want to continue? Create a page first. - + Create a page first. Select exactly one Part object. - + Select exactly one Part object. @@ -789,7 +791,7 @@ Do you want to continue? SVG (*.svg) - + SVG (*.svg) SVG(*.svg) diff --git a/src/Mod/Fem/Gui/Resources/Fem.qrc b/src/Mod/Fem/Gui/Resources/Fem.qrc index f476601253..9ec3a23733 100755 --- a/src/Mod/Fem/Gui/Resources/Fem.qrc +++ b/src/Mod/Fem/Gui/Resources/Fem.qrc @@ -39,5 +39,6 @@ translations/Fem_ro.qm translations/Fem_hu.qm translations/Fem_pt-PT.qm + translations/Fem_sr.qm diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_af.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_af.qm index 8712012a78..d4087f2bfb 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_af.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_af.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_af.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_af.ts index 13070ee5c7..10b2c96634 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_af.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_af.ts @@ -235,7 +235,7 @@ FemGui::TaskDlgFemConstraintForce - + Input error Invoerfout @@ -347,36 +347,24 @@ FemGui::TaskFemConstraintForce - + Delete Vee uit - - Force [N] - Force [N] - - - Force [N/mm] - Force [N/mm] - - - Force [N/mm²] - Force [N/mm²] - Point load [N] - + Point load [N] Line load [N/mm] - + Line load [N/mm] Area load [N/mm²] - + Area load [N/mm²] @@ -481,6 +469,16 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix Run Calculix @@ -628,6 +626,11 @@ Meshing Meshing + + + Constraint force + + ShowDisplacement diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm index a553c4dbc5..5703fe914b 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts index e073f71043..cd6a110121 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts @@ -116,7 +116,7 @@ Create a FEM analysis - Create a FEM analysis + Vytvoření FEM analýzy @@ -148,7 +148,7 @@ Define/create a nodes set... - Define/create a nodes set... + Definuj/vytvoř nastavení uzlů... @@ -221,7 +221,7 @@ You must specify at least one reference - You must specify at least one reference + Musíte specifikovat nejméně jednu referenci @@ -235,7 +235,7 @@ FemGui::TaskDlgFemConstraintForce - + Input error Chyba zadání @@ -287,7 +287,7 @@ Selection error - Selection error + Chyba výběru @@ -312,7 +312,7 @@ Only linear edges can be picked - Only linear edges can be picked + Mohou být vybrány pouze lineární hrany @@ -331,7 +331,7 @@ Selection error - Selection error + Chyba výběru @@ -347,36 +347,24 @@ FemGui::TaskFemConstraintForce - + Delete Odstranit - - Force [N] - Síla [N] - - - Force [N/mm] - Tah [N/mm] - - - Force [N/mm²] - Tlak [N/mm²] - Point load [N] - + Point load [N] Line load [N/mm] - + Line load [N/mm] Area load [N/mm²] - + Area load [N/mm²] @@ -385,7 +373,7 @@ Selection error - Selection error + Chyba výběru @@ -405,7 +393,7 @@ Only linear edges can be picked - Only linear edges can be picked + Mohou být vybrány pouze lineární hrany @@ -420,7 +408,7 @@ Selection error - Selection error + Chyba výběru @@ -430,7 +418,7 @@ Only linear edges can be picked - Only linear edges can be picked + Mohou být vybrány pouze lineární hrany @@ -464,7 +452,7 @@ Tet Parameter - Tet Parameter + Tet parametr @@ -472,7 +460,7 @@ Mechanical analysis - Mechanical analysis + Mechanická analýza @@ -481,8 +469,18 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix - Run Calculix + Spusť CalculiX @@ -497,17 +495,17 @@ choose... - choose... + vyber... MatWeb database... - MatWeb database... + Databáze MatWeb... Young's Modulus: - Young's Modulus: + Youngův modul: @@ -525,12 +523,12 @@ No active Analysis - No active Analysis + Žádná aktivní analýza You need to create or activate a Analysis - You need to create or activate a Analysis + Musíš vytvořit nebo aktivovat analýzu @@ -628,13 +626,18 @@ Meshing Meshing + + + Constraint force + + ShowDisplacement Show result - Show result + Zobrazit výsledek @@ -699,7 +702,7 @@ Meshes: - Meshes: + Sítě: @@ -727,7 +730,7 @@ Nodes: 0 - Nodes: 0 + Uzly: 0 @@ -793,7 +796,7 @@ Diameter - Diameter + Průměr @@ -803,7 +806,7 @@ Center distance - Center distance + Vzdálenost středu @@ -851,7 +854,7 @@ Center distance - Center distance + Vzdálenost středu @@ -1018,22 +1021,22 @@ Optimize - Optimize + Optimalizovat Node count: - Node count: + Počet uzlů: Triangle count: - Triangle count: + Počet trojúhelníků: Tetraeder count: - Tetraeder count: + Počet tetraedrů: diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm index b58848f2a1..1fb70ca045 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts index b4d06777c9..15b02f6005 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts @@ -1,6 +1,6 @@ - + CmdFemAddPart @@ -12,7 +12,7 @@ Add a part to the Analysis - + Ein Teil zur Analyse hinzufügen @@ -25,12 +25,12 @@ Create FEM bearing constraint - + FEM-Lagerrandbedingung erstellen Create FEM constraint for a bearing - + FEM-Randbedingung für ein Lager erstellen @@ -43,12 +43,12 @@ Create FEM fixed constraint - + FEM-Einspannbedingung erstellen Create FEM constraint for a fixed geometric entity - + FEM-Randbedingung für eine fixierte geometrische Einheit erstellen @@ -61,12 +61,12 @@ Create FEM force constraint - + FEM-Kraftrandbedingung erstellen Create FEM constraint for a force acting on a geometric entity - + FEM-Randbedingung für eine auf eine geometrische Einheit wirkende Kraft erstellen @@ -79,12 +79,12 @@ Create FEM gear constraint - + FEM-Zahnradrandbedingung erstellen Create FEM constraint for a gear - + FEM-Randbedingung für ein Zahnrad erstellen @@ -97,12 +97,12 @@ Create FEM pulley constraint - + FEM-Rollenrandbedingung erstellen Create FEM constraint for a pulley - + FEM-Randbedingung für eine Rolle erstellen @@ -116,7 +116,7 @@ Create a FEM analysis - + Eine FEM-Analyse erstellen @@ -148,7 +148,7 @@ Define/create a nodes set... - + Definieren/Erstellen eines Knoten-Sets ... @@ -163,7 +163,7 @@ Create node set by Poly - + Erstelle Knotengruppe mittels Poly @@ -199,7 +199,7 @@ Nodes set - + Knoten-Set @@ -207,7 +207,7 @@ Nodes set - + Knoten-Set @@ -216,12 +216,12 @@ Input error - + Eingabefehler You must specify at least one reference - + Sie müssen mindestens eine Referenz angeben @@ -229,15 +229,15 @@ Input error - + Eingabefehler FemGui::TaskDlgFemConstraintForce - + Input error - + Eingabefehler @@ -245,7 +245,7 @@ Input error - + Eingabefehler @@ -253,7 +253,7 @@ Input error - + Eingabefehler @@ -261,7 +261,7 @@ Nodes set - + Knoten-Set @@ -269,7 +269,7 @@ FEM constraint parameters - + FEM-Randbedingungsparameter @@ -277,7 +277,7 @@ Delete - + Löschen @@ -287,37 +287,37 @@ Selection error - + Auswahlfehler Please use only a single reference for bearing constraint - + Bitte verwenden Sie nur eine einzige Referenz für die Lagerrandbedingung Only faces can be picked - + Es können nur Flächen ausgewählt werden Only cylindrical faces can be picked - + Es können nur zylindrische Flächen ausgewählt werden Only planar faces can be picked - + Es können nur ebene Flächen ausgewählt werden Only linear edges can be picked - + Es können nur geradlinige Kanten ausgewählt werden Only faces and edges can be picked - + Es können nur Flächen und Kanten ausgewählt werden @@ -325,46 +325,46 @@ Delete - + Löschen Selection error - + Auswahlfehler Mixed shape types are not possible. Use a second constraint instead - + Gemischte Formtypen sind nicht möglich. Verwenden Sie stattdessen eine zweite Randbedingung Only faces, edges and vertices can be picked - + Es können nur Flächen, Kanten und Ecken ausgewählt werden FemGui::TaskFemConstraintForce - + Delete - + Löschen Point load [N] - + Punktlast [N] Line load [N/mm] - + Linienlast [N/mm] Area load [N/mm²] - + Flächenlast [N/mm²] @@ -373,32 +373,32 @@ Selection error - + Auswahlfehler Mixed shape types are not possible. Use a second constraint instead - + Gemischte Formtypen sind nicht möglich. Verwenden Sie stattdessen eine zweite Randbedingung Only faces, edges and vertices can be picked - + Es können nur Flächen, Kanten und Ecken ausgewählt werden Only planar faces can be picked - + Es können nur ebene Flächen ausgewählt werden Only linear edges can be picked - + Es können nur geradlinige Kanten ausgewählt werden Only faces and edges can be picked - + Es können nur Flächen und Kanten ausgewählt werden @@ -408,22 +408,22 @@ Selection error - + Auswahlfehler Only planar faces can be picked - + Es können nur ebene Flächen ausgewählt werden Only linear edges can be picked - + Es können nur geradlinige Kanten ausgewählt werden Only faces and edges can be picked - + Es können nur Flächen und Kanten ausgewählt werden @@ -431,12 +431,12 @@ Pulley diameter - + Rollendurchmesser Torque [Nm] - + Drehmoment [Nm] @@ -444,7 +444,7 @@ TaskObjectName - + AufgabenObjektName @@ -452,7 +452,7 @@ Tet Parameter - + Tetraeder-Parameter @@ -460,52 +460,62 @@ Mechanical analysis - + Mechanische Analyse ... - + ... - Run Calculix - - - - - Time: - - - - - Mechanical material + Write Calculix Input File - choose... + Edit Calculix Input File + + + Run Calculix + Calculix ausführen + + + + Time: + Zeit: + + + + Mechanical material + Mechanisches Material + + + + choose... + auswählen... + MatWeb database... - + MatWeb-Datenbank... Young's Modulus: - + Elastizitätsmodul: Pa - + Pa Poisson Ratio: - + Poissonzahl: @@ -513,12 +523,12 @@ No active Analysis - + Keine aktive Analyse You need to create or activate a Analysis - + Sie müssen eine Analyse erstellen oder aktivieren @@ -526,72 +536,72 @@ Wrong selection - + Falsche Auswahl Your FreeCAD is build without NETGEN support. Meshing will not work.... - + Ihr FreeCAD ist ohne NETGEN-Unterstützung gebaut. Gittererzeugung wird nicht funktionieren.... Select an edge, face or body. Only one body is allowed. - + Wählen Sie eine Kante, eine Fläche oder einen Körper. Nur ein Körper ist erlaubt. Wrong object type - + Falscher Objekt-Typ Fillet works only on parts - + Rundung funktioniert nur bei Teilen Ok - + Ok Cancel - + Abbrechen Edit constraint - + Randbedingung bearbeiten Combo View - + Combo-Ansicht combiTab - + Mehrfach-Reiter qt_tabwidget_stackedwidget - + qt_tabwidget_stackedwidget ShaftWizard - + Wellen-Assistent ShaftWizardLayout - + Wellen-Assistent-Layout @@ -600,7 +610,7 @@ A dialog is already open in the task panel - + Ein Dialog im Arbeitspanel ist bereits geöffnet @@ -609,11 +619,16 @@ Do you want to close this dialog? - + Möchten Sie dieses Dialogfeld schließen? Meshing + Vernetzung + + + + Constraint force @@ -622,59 +637,59 @@ Show result - + Ergebnis anzeigen Colors - + Farben Displacement - + Verdrängung Max: - + Max: Min: - + Min: None - + Kein Avg: - + Durchschnitt: mm - + mm Show - + Anzeigen Factor: - + Faktor: Slider max: - + Schieber maximal: @@ -682,17 +697,17 @@ Form - + Form Meshes: - + Netze: Constraints - + Einschränkungen @@ -700,57 +715,57 @@ Form - + Form Volume - + Volumen Surface - + Oberfläche Nodes: 0 - + Knoten: 0 Poly - + Poly Box - + Quader Pick - + Auswählen Add - + Hinzufügen Angle-search - + Winkelsuche Collect adjancent nodes - + Angrenzende Knoten erfassen Stop angle: - + Stoppwinkel: @@ -758,7 +773,7 @@ Form - + Form @@ -766,52 +781,52 @@ Form - + Form Add reference - + Referenz hinzufügen Load [N] - + Belastung [N] Diameter - + Durchmesser Other diameter - + Anderer Durchmesser Center distance - + Achsabstand Direction - + Richtung Reverse direction - + Umgekehrte Richtung Location - + Lage Distance - + Abstand @@ -819,72 +834,72 @@ Form - + Form Add reference - + Referenz hinzufügen Gear diameter - + Wälzkreisdurchmesser Other pulley dia - + Weitere Rollendurchmesser Center distance - + Achsabstand Force - + Kraft Belt tension force - + Riemenspannungskraft Driven pulley - + Abtriebsrolle Force location [deg] - + Kraftwinkel [Grad] Force Direction - + Kraftrichtung Reversed direction - + Umgekehrte Richtung Axial free - + Axial frei beweglich Location - + Lage Distance - + Abstand @@ -892,12 +907,12 @@ Form - + Form Add reference - + Referenz hinzufügen @@ -905,27 +920,27 @@ Form - + Form Add reference - + Referenz hinzufügen Load [N] - + Belastung [N] Direction - + Richtung Reverse direction - + Umgekehrte Richtung @@ -933,7 +948,7 @@ Form - + Form @@ -941,87 +956,87 @@ Form - + Form Max. Size: - + Max. Größe: Second order - + Zweite Ordnung Fineness: - + Feinheit: VeryCoarse - + Sehr grob Coarse - + Grob Moderate - + Mittel Fine - + Fein VeryFine - + Sehr fein UserDefined - + Benutzerdefiniert Growth Rate: - + Wachstumsrate: Nbr. Segs per Edge: - + Anz. Segmente pro Kante: Nbr. Segs per Radius: - + Anz. Segmente pro Radius: Optimize - + Optimieren Node count: - + Knotenanzahl: Triangle count: - + Dreiecksanzahl: Tetraeder count: - + Tetraederanzahl: diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm index eaf10637ec..1f4458ab1b 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts index f5299adf48..6f2d475600 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts @@ -6,7 +6,7 @@ Fem - Fem + FEM @@ -20,7 +20,7 @@ Fem - Fem + FEM @@ -38,7 +38,7 @@ Fem - Fem + FEM @@ -56,7 +56,7 @@ Fem - Fem + FEM @@ -74,7 +74,7 @@ Fem - Fem + FEM @@ -92,12 +92,12 @@ Fem - Fem + FEM Create FEM pulley constraint - Create FEM pulley constraint + Crear una restriccíon polea FEM @@ -110,7 +110,7 @@ Fem - Fem + FEM @@ -124,7 +124,7 @@ Fem - Fem + FEM @@ -142,7 +142,7 @@ Fem - Fem + FEM @@ -156,14 +156,14 @@ Fem - Fem + FEM Create node set by Poly - Create node set by Poly + Crear conjunto de nodos por Poly @@ -199,7 +199,7 @@ Nodes set - Nodes set + Conjunto de nodos @@ -207,7 +207,7 @@ Nodes set - Nodes set + Conjunto de nodos @@ -235,7 +235,7 @@ FemGui::TaskDlgFemConstraintForce - + Input error Error de entrada @@ -261,7 +261,7 @@ Nodes set - Nodes set + Conjunto de nodos @@ -336,7 +336,7 @@ Mixed shape types are not possible. Use a second constraint instead - Mixed shape types are not possible. Use a second constraint instead + Tipos de forma mixta no son posibles. Utilice en su lugar una segunda limitación @@ -347,36 +347,24 @@ FemGui::TaskFemConstraintForce - + Delete Borrar - - Force [N] - Fuerza [N] - - - Force [N/mm] - Fuerza [N/mm] - - - Force [N/mm²] - Fuerza [N/mm^2] - Point load [N] - + Fuerza puntual [N] Line load [N/mm] - + Fuerza lineal [N/mm] Area load [N/mm²] - + Fuerza superficial [N/mm²] @@ -390,7 +378,7 @@ Mixed shape types are not possible. Use a second constraint instead - Mixed shape types are not possible. Use a second constraint instead + Tipos de forma mixta no son posibles. Utilice en su lugar una segunda limitación @@ -481,6 +469,16 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix Ejecutar Calculix @@ -628,6 +626,11 @@ Meshing Mallado + + + Constraint force + + ShowDisplacement @@ -686,7 +689,7 @@ Slider max: - Slider max: + Máx. deslizador: @@ -752,17 +755,17 @@ Angle-search - Angle-search + Búsqueda por ángulo Collect adjancent nodes - Collect adjancent nodes + Reunir nodos adyacentes Stop angle: - Stop angle: + Ángulo final: @@ -846,7 +849,7 @@ Other pulley dia - Other pulley dia + Otro diámetro de polea @@ -968,17 +971,17 @@ Fineness: - Fineness: + Precisión: VeryCoarse - VeryCoarse + Muy basta Coarse - Coarse + Grueso @@ -988,32 +991,32 @@ Fine - Fine + Fino VeryFine - VeryFine + Muy fina UserDefined - UserDefined + Definido por el usuario Growth Rate: - Growth Rate: + Tasa de crecimiento: Nbr. Segs per Edge: - Nbr. Segs per Edge: + Nº de segmentos por arista: Nbr. Segs per Radius: - Nbr. Segs per Radius: + Nº de segmentos por radio: diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.qm index 880b14fcd3..4e4c4f0782 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts index 5a82ee607b..4d24792c25 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts @@ -6,13 +6,13 @@ Fem - Elementtimenetelmä + FEM-Elementtimenetelmä Add a part to the Analysis - Add a part to the Analysis + Lisää osa analyysiin @@ -20,17 +20,17 @@ Fem - Elementtimenetelmä + FEM-Elementtimenetelmä Create FEM bearing constraint - Create FEM bearing constraint + Luo FEM suuntima rajoite Create FEM constraint for a bearing - Create FEM constraint for a bearing + Luo FEM rajoite suuntimaa varten @@ -38,17 +38,17 @@ Fem - Elementtimenetelmä + FEM-Elementtimenetelmä Create FEM fixed constraint - Create FEM fixed constraint + Luo FEMin kiinteä rajoite Create FEM constraint for a fixed geometric entity - Create FEM constraint for a fixed geometric entity + Luo FEM rajoite kiiinteän gemetrian kohteelle @@ -56,17 +56,17 @@ Fem - Elementtimenetelmä + FEM-Elementtimenetelmä Create FEM force constraint - Create FEM force constraint + Luo FEM voima rajoite Create FEM constraint for a force acting on a geometric entity - Create FEM constraint for a force acting on a geometric entity + Luo FEM rajoite voimalle, joka toimii geometrisellä kohteella @@ -74,17 +74,17 @@ Fem - Elementtimenetelmä + FEM-Elementtimenetelmä Create FEM gear constraint - Create FEM gear constraint + Luo FEM ratas rajoite Create FEM constraint for a gear - Create FEM constraint for a gear + Luo FEM rajoite rattaalle @@ -92,17 +92,17 @@ Fem - Elementtimenetelmä + FEM-Elementtimenetelmä Create FEM pulley constraint - Create FEM pulley constraint + Luo FEM hihnapyörä rajoite Create FEM constraint for a pulley - Create FEM constraint for a pulley + Luo FEM rajoite hihnapyörälle @@ -110,13 +110,13 @@ Fem - Elementtimenetelmä + FEM-Elementtimenetelmä Create a FEM analysis - Create a FEM analysis + Luo FEM analyysi @@ -124,17 +124,17 @@ Fem - Elementtimenetelmä + FEM-Elementtimenetelmä Create FEM mesh - Luo ELEMENTTIMENETELMÄN verkko + Luo FEM-ELEMENTTIMENETELMÄN tahko Create FEM mesh from shape - Luo ELEMENTTIMENETELMÄN verkko muodosta + Luo FEM-ELEMENTTIMENETELMÄN tahko muodosta @@ -142,13 +142,13 @@ Fem - Elementtimenetelmä + FEM-Elementtimenetelmä Define/create a nodes set... - Define/create a nodes set... + Määritä/Luo solmukohtien joukko... @@ -156,14 +156,14 @@ Fem - Elementtimenetelmä + FEM-Elementtimenetelmä Create node set by Poly - Create node set by Poly + Luo monikulmion määrittämä solmukohtien joukko @@ -199,7 +199,7 @@ Nodes set - Nodes set + Solmukohtien määrittely @@ -207,7 +207,7 @@ Nodes set - Nodes set + Solmukohtien määrittely @@ -221,7 +221,7 @@ You must specify at least one reference - You must specify at least one reference + Sinun on määritettävä vähintään yksi viittaus @@ -235,7 +235,7 @@ FemGui::TaskDlgFemConstraintForce - + Input error Syötteen virhe @@ -261,7 +261,7 @@ Nodes set - Nodes set + Solmukohtien määrittely @@ -269,7 +269,7 @@ FEM constraint parameters - FEM constraint parameters + FEM-elementtimenetelmän rajoitteiden parametrit @@ -287,37 +287,37 @@ Selection error - Selection error + Valintavirhe Please use only a single reference for bearing constraint - Please use only a single reference for bearing constraint + Käytä vain yhtä viitettä suuntiman rajoitteessa Only faces can be picked - Only faces can be picked + Vain tahkoja voidaan poimia Only cylindrical faces can be picked - Only cylindrical faces can be picked + Vain sylinteripintoja voidaan poimia Only planar faces can be picked - Only planar faces can be picked + Vain tasopinnat on poimittavissa Only linear edges can be picked - Only linear edges can be picked + Vain lineaariset reunat on poimittavissa Only faces and edges can be picked - Only faces and edges can be picked + Vain tahkot ja reunat on poimittavissa @@ -331,52 +331,40 @@ Selection error - Selection error + Valintavirhe Mixed shape types are not possible. Use a second constraint instead - Mixed shape types are not possible. Use a second constraint instead + Sekoitetut muototyypit eivät ole mahdollisia. Käytä sen sijaan toista rajoitetta Only faces, edges and vertices can be picked - Only faces, edges and vertices can be picked + Vain näkymäpinna, reunat ja kärkipisteet ovat noudettavissa FemGui::TaskFemConstraintForce - + Delete Poista - - Force [N] - Force [N] - - - Force [N/mm] - Force [N/mm] - - - Force [N/mm²] - Force [N/mm²] - Point load [N] - + Pistekuorma [N] Line load [N/mm] - + Viivakuorma [N/mm] Area load [N/mm²] - + Pinta-ala kuorma [N/mm²] @@ -385,32 +373,32 @@ Selection error - Selection error + Valintavirhe Mixed shape types are not possible. Use a second constraint instead - Mixed shape types are not possible. Use a second constraint instead + Sekoitetut muototyypit eivät ole mahdollisia. Käytä sen sijaan toista rajoitetta Only faces, edges and vertices can be picked - Only faces, edges and vertices can be picked + Vain näkymäpinna, reunat ja kärkipisteet ovat noudettavissa Only planar faces can be picked - Only planar faces can be picked + Vain tasopinnat on poimittavissa Only linear edges can be picked - Only linear edges can be picked + Vain lineaariset reunat on poimittavissa Only faces and edges can be picked - Only faces and edges can be picked + Vain tahkot ja reunat on poimittavissa @@ -420,22 +408,22 @@ Selection error - Selection error + Valintavirhe Only planar faces can be picked - Only planar faces can be picked + Vain tasopinnat on poimittavissa Only linear edges can be picked - Only linear edges can be picked + Vain lineaariset reunat on poimittavissa Only faces and edges can be picked - Only faces and edges can be picked + Vain tahkot ja reunat on poimittavissa @@ -443,12 +431,12 @@ Pulley diameter - Pulley diameter + Hihnapyörän halkaisija Torque [Nm] - Torque [Nm] + Vääntömomentti [Nm] @@ -456,7 +444,7 @@ TaskObjectName - TaskObjectName + TehtäväKohteenNimi @@ -464,7 +452,7 @@ Tet Parameter - Tet Parameter + Tet muuttuja @@ -472,7 +460,7 @@ Mechanical analysis - Mechanical analysis + Mekaaninen analysointi @@ -481,33 +469,43 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix - Run Calculix + Suorita Calculix Time: - Time: + Aika: Mechanical material - Mechanical material + Mekaaninen materiaali choose... - choose... + Valitse... MatWeb database... - MatWeb database... + MatWeb tietokantaa... Young's Modulus: - Young's Modulus: + Elastiset kertoimet: @@ -517,7 +515,7 @@ Poisson Ratio: - Poisson Ratio: + Poissonin suhde: @@ -525,12 +523,12 @@ No active Analysis - No active Analysis + Ei aktiivia analysointia You need to create or activate a Analysis - You need to create or activate a Analysis + Sinun täytyy luoda tai aktivoida analyysi @@ -544,7 +542,7 @@ Your FreeCAD is build without NETGEN support. Meshing will not work.... - Your FreeCAD is build without NETGEN support. Meshing will not work.... + Sinun FreeCAD on koottu ilman NETGEN tukea. Verkkopinnan käyttö ei toimi.... @@ -577,7 +575,7 @@ Edit constraint - Edit constraint + Muokkaa rajoitusta @@ -598,12 +596,12 @@ ShaftWizard - ShaftWizard + AkseliApuväline ShaftWizardLayout - ShaftWizardLayout + AkseliApuvälineUlkonäkö @@ -626,7 +624,12 @@ Meshing - Meshing + Verkkopinnan käyttö + + + + Constraint force + @@ -634,7 +637,7 @@ Show result - Show result + Näytä tulos @@ -664,7 +667,7 @@ Avg: - Avg: + Keskiarvo: @@ -676,17 +679,17 @@ Show - Show + Näytä Factor: - Factor: + Kerroin: Slider max: - Slider max: + Liukusäädin max: @@ -699,7 +702,7 @@ Meshes: - Meshes: + Verkkopinnat: @@ -717,22 +720,22 @@ Volume - Volume + Tilavuus Surface - Surface + Pinta Nodes: 0 - Nodes: 0 + Solmukohdat: 0 Poly - Poly + Moni(kulmio) @@ -742,7 +745,7 @@ Pick - Pick + Valitse @@ -752,17 +755,17 @@ Angle-search - Angle-search + Kulma-haku Collect adjancent nodes - Collect adjancent nodes + Kerää vierekkäiset solmukohdat Stop angle: - Stop angle: + Lopetuskulma: @@ -783,27 +786,27 @@ Add reference - Add reference + Lisää viite Load [N] - Load [N] + Kuorma [N] Diameter - Diameter + Halkaisija Other diameter - Other diameter + Muu halkaisija Center distance - Center distance + Akseliväli @@ -836,57 +839,57 @@ Add reference - Add reference + Lisää viite Gear diameter - Gear diameter + Hammaspyörän halkaisija Other pulley dia - Other pulley dia + Muu hihnapyörän halkaisija Center distance - Center distance + Akseliväli Force - Force + Voima Belt tension force - Belt tension force + Vyön kireys voima Driven pulley - Driven pulley + Variaattori Force location [deg] - Force location [deg] + Voiman sijainti [deg] Force Direction - Force Direction + Voiman suunta Reversed direction - Reversed direction + Käänteinen suunta Axial free - Axial free + Akselivapaa @@ -909,7 +912,7 @@ Add reference - Add reference + Lisää viite @@ -922,12 +925,12 @@ Add reference - Add reference + Lisää viite Load [N] - Load [N] + Kuorma [N] @@ -958,82 +961,82 @@ Max. Size: - Max. Size: + Max. koko: Second order - Second order + Toinen järjestys Fineness: - Fineness: + Hienous: VeryCoarse - VeryCoarse + HyvinKarkea Coarse - Coarse + Karkea Moderate - Moderate + Kohtalainen Fine - Fine + Hieno VeryFine - VeryFine + HyvinHieno UserDefined - UserDefined + KäyttäjänMäärittelemä Growth Rate: - Growth Rate: + Kasvunopeus: Nbr. Segs per Edge: - Nbr. Segs per Edge: + Lohkojen lukumäärä reunaa kohden: Nbr. Segs per Radius: - Nbr. Segs per Radius: + Lohkojen lukumäärä sädettä kohden: Optimize - Optimize + Optimoi Node count: - Node count: + Solmupisteiden määrä: Triangle count: - Triangle count: + Kolmioiden määrä: Tetraeder count: - Tetraeder count: + Tetraedrien määrä: @@ -1041,12 +1044,12 @@ FEM - ELEMENTTIMENETELMÄ + FEM-elementimenetelmä &FEM - &ELEMENTTIMENETELMÄ + &FEM-elementimenetelmä diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm index 63da9b109a..d1cdb0a30f 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts index 9f71ca5341..fae3ce3324 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts @@ -235,7 +235,7 @@ FemGui::TaskDlgFemConstraintForce - + Input error Erreur de saisie @@ -347,36 +347,24 @@ FemGui::TaskFemConstraintForce - + Delete Supprimer - - Force [N] - Force [N] - - - Force [N/mm] - Force [N/mm] - - - Force [N/mm²] - Force [N/mm²] - Point load [N] - + Chargement local [N] Line load [N/mm] - + Chargement linéaire [N/mm] Area load [N/mm²] - + Chargement surfacique [N/mm2] @@ -481,6 +469,16 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix Exécutez Calculix @@ -517,7 +515,7 @@ Poisson Ratio: - Coefficient de poisson : + Coefficient de Poisson : @@ -628,6 +626,11 @@ Meshing Maillage + + + Constraint force + + ShowDisplacement diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm index bcf8943d7d..2ea27dfd3c 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts index c568858f66..6a69aa52e1 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts @@ -235,7 +235,7 @@ FemGui::TaskDlgFemConstraintForce - + Input error Pogreška na ulazu @@ -347,36 +347,24 @@ FemGui::TaskFemConstraintForce - + Delete Izbriši - - Force [N] - Force [N] - - - Force [N/mm] - Force [N/mm] - - - Force [N/mm²] - Force [N/mm²] - Point load [N] - + Point load [N] Line load [N/mm] - + Line load [N/mm] Area load [N/mm²] - + Area load [N/mm²] @@ -481,6 +469,16 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix Run Calculix @@ -628,6 +626,11 @@ Meshing Meshing + + + Constraint force + + ShowDisplacement diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm index cf1f073abf..e05eb3d2f2 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts index fd5fdb9db6..35dd131584 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts @@ -12,7 +12,7 @@ Add a part to the Analysis - Add a part to the Analysis + Egy rész hozzáadása az elemzéshez @@ -61,7 +61,7 @@ Create FEM force constraint - Create FEM force constraint + FEM erő kényszerítés létrehozása @@ -235,7 +235,7 @@ FemGui::TaskDlgFemConstraintForce - + Input error Bemeneti hiba @@ -347,36 +347,24 @@ FemGui::TaskFemConstraintForce - + Delete Törlés - - Force [N] - Force [N] - - - Force [N/mm] - Force [N/mm] - - - Force [N/mm²] - Force [N/mm²] - Point load [N] - + Point load [N] Line load [N/mm] - + Line load [N/mm] Area load [N/mm²] - + Area load [N/mm²] @@ -481,6 +469,16 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix Run Calculix @@ -628,6 +626,11 @@ Meshing Meshing + + + Constraint force + + ShowDisplacement diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm index 787dc14a79..99891480f5 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts index d0211cad3c..24187d71cf 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts @@ -163,7 +163,7 @@ Create node set by Poly - Create node set by Poly + Crea un set di nodi @@ -235,7 +235,7 @@ FemGui::TaskDlgFemConstraintForce - + Input error Errore di input @@ -297,27 +297,27 @@ Only faces can be picked - Only faces can be picked + Solo le facce possono essere selezionate Only cylindrical faces can be picked - Only cylindrical faces can be picked + Solo le superfici cilindriche possono essere selezionate Only planar faces can be picked - Only planar faces can be picked + Solo le superfici piane possono essere selezionate Only linear edges can be picked - Only linear edges can be picked + Solo i bordi rettilinei possono essere selezionati Only faces and edges can be picked - Only faces and edges can be picked + Solo le superfici e i bordi possono essere selezionati @@ -341,42 +341,30 @@ Only faces, edges and vertices can be picked - Only faces, edges and vertices can be picked + Solo le superfici, i bordi e i vertici possono essere selezionati FemGui::TaskFemConstraintForce - + Delete Elimina - - Force [N] - Forza [N] - - - Force [N/mm] - Forza [N/mm] - - - Force [N/mm²] - Forza [N/mm²] - Point load [N] - + Carico nel punto [N] Line load [N/mm] - + Carico sulla linea [N/mm] Area load [N/mm²] - + Carico sull'area [N/mm ²] @@ -395,22 +383,22 @@ Only faces, edges and vertices can be picked - Only faces, edges and vertices can be picked + Solo le superfici, i bordi e i vertici possono essere selezionati Only planar faces can be picked - Only planar faces can be picked + Solo le superfici piane possono essere selezionate Only linear edges can be picked - Only linear edges can be picked + Solo i bordi rettilinei possono essere selezionati Only faces and edges can be picked - Only faces and edges can be picked + Solo le superfici e i bordi possono essere selezionati @@ -425,17 +413,17 @@ Only planar faces can be picked - Only planar faces can be picked + Solo le superfici piane possono essere selezionate Only linear edges can be picked - Only linear edges can be picked + Solo i bordi rettilinei possono essere selezionati Only faces and edges can be picked - Only faces and edges can be picked + Solo le superfici e i bordi possono essere selezionati @@ -464,7 +452,7 @@ Tet Parameter - Tet Parameter + Parametro Tetraedro @@ -481,6 +469,16 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix Esegui Calculix @@ -628,6 +626,11 @@ Meshing Meshing + + + Constraint force + + ShowDisplacement @@ -686,7 +689,7 @@ Slider max: - Slider max: + Corsa max: @@ -732,7 +735,7 @@ Poly - Poly + Poligono @@ -752,12 +755,12 @@ Angle-search - Angle-search + Ricerca dell'angolo Collect adjancent nodes - Collect adjancent nodes + Seleziona i nodi adiacenti @@ -841,12 +844,12 @@ Gear diameter - Gear diameter + Diametro dell'ingranaggio Other pulley dia - Other pulley dia + Diametro altra puleggia @@ -866,7 +869,7 @@ Driven pulley - Driven pulley + Puleggia motrice @@ -886,7 +889,7 @@ Axial free - Axial free + Libertà assiale diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.qm index e342e4b75a..08499d8e85 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts index 213e52b97d..9aa647007d 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts @@ -25,12 +25,12 @@ Create FEM bearing constraint - Create FEM bearing constraint + FEMベアリング拘束を作成 Create FEM constraint for a bearing - Create FEM constraint for a bearing + ベアリングのためのFEM拘束を作成 @@ -43,12 +43,12 @@ Create FEM fixed constraint - Create FEM fixed constraint + FEM固定拘束を作成 Create FEM constraint for a fixed geometric entity - 固定ジオメトリ エンティティの拘束を作成 + ジオメトリーエンティティの固定を表すFEM拘束を作成 @@ -61,12 +61,12 @@ Create FEM force constraint - Create FEM force constraint + FEM荷重拘束を作成 Create FEM constraint for a force acting on a geometric entity - Create FEM constraint for a force acting on a geometric entity + ジオメトリーエンティティに作用する力を表すFEM拘束を作成 @@ -79,12 +79,12 @@ Create FEM gear constraint - Create FEM gear constraint + FEMギア拘束を作成 Create FEM constraint for a gear - Create FEM constraint for a gear + ギアのためのFEM拘束を作成 @@ -97,12 +97,12 @@ Create FEM pulley constraint - Create FEM pulley constraint + FEMプーリー拘束を作成 Create FEM constraint for a pulley - Create FEM constraint for a pulley + プーリーのためのFEM拘束を作成 @@ -116,7 +116,7 @@ Create a FEM analysis - Create a FEM analysis + FEM解析を作成 @@ -148,7 +148,7 @@ Define/create a nodes set... - Define/create a nodes set... + 頂点セットを定義/作成 @@ -163,7 +163,7 @@ Create node set by Poly - Create node set by Poly + ポリゴンから頂点セットを作成 @@ -199,7 +199,7 @@ Nodes set - Nodes set + 頂点セット @@ -207,7 +207,7 @@ Nodes set - Nodes set + 頂点セット @@ -235,7 +235,7 @@ FemGui::TaskDlgFemConstraintForce - + Input error 入力エラー @@ -261,7 +261,7 @@ Nodes set - Nodes set + 頂点セット @@ -269,7 +269,7 @@ FEM constraint parameters - FEM constraint parameters + FEM拘束パラメーター @@ -292,7 +292,7 @@ Please use only a single reference for bearing constraint - Please use only a single reference for bearing constraint + ベアリング拘束では参照を1つだけ使用してください @@ -307,7 +307,7 @@ Only planar faces can be picked - 平坦な面のみを選択できます。 + 平らな面のみを選択できます。 @@ -336,47 +336,35 @@ Mixed shape types are not possible. Use a second constraint instead - Mixed shape types are not possible. Use a second constraint instead + 複数のシェイプタイプを使用することはできません。2番目の拘束を代わりに使用してください。 Only faces, edges and vertices can be picked - Only faces, edges and vertices can be picked + 面，エッジ，および頂点のみ選択可能 FemGui::TaskFemConstraintForce - + Delete 削除 - - Force [N] - Force [N] - - - Force [N/mm] - Force [N/mm] - - - Force [N/mm²] - Force [N/mm²] - Point load [N] - + 点荷重 [N] Line load [N/mm] - + 線荷重 [N/mm] Area load [N/mm²] - + 面荷重 [N/mm ²] @@ -390,17 +378,17 @@ Mixed shape types are not possible. Use a second constraint instead - Mixed shape types are not possible. Use a second constraint instead + 複数のシェイプタイプを使用することはできません。2番目の拘束を代わりに使用してください。 Only faces, edges and vertices can be picked - Only faces, edges and vertices can be picked + 面，エッジ，および頂点のみ選択可能 Only planar faces can be picked - 平坦な面のみを選択できます。 + 平らな面のみを選択できます。 @@ -425,7 +413,7 @@ Only planar faces can be picked - 平坦な面のみを選択できます。 + 平らな面のみを選択できます。 @@ -443,7 +431,7 @@ Pulley diameter - Pulley diameter + プーリ径 @@ -464,7 +452,7 @@ Tet Parameter - Tet Parameter + テトラパラメーター @@ -472,7 +460,7 @@ Mechanical analysis - Mechanical analysis + 機械解析 @@ -481,33 +469,43 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix - Run Calculix + Calculix を実行 Time: - Time: + 時間： Mechanical material - Mechanical material + 機械材料 choose... - choose... + 選択... MatWeb database... - MatWeb database... + MatWebデータベース... Young's Modulus: - Young's Modulus: + ヤング係数: @@ -525,12 +523,12 @@ No active Analysis - No active Analysis + 実行中の解析はありません You need to create or activate a Analysis - You need to create or activate a Analysis + 解析を作成または有効にする必要があります。 @@ -567,7 +565,7 @@ Ok - Ok + OK @@ -577,7 +575,7 @@ Edit constraint - Edit constraint + 拘束を編集 @@ -628,6 +626,11 @@ Meshing メッシュ作成 + + + Constraint force + + ShowDisplacement @@ -664,7 +667,7 @@ Avg: - Avg: + 平均: @@ -686,7 +689,7 @@ Slider max: - Slider max: + スライダー最大値: @@ -699,7 +702,7 @@ Meshes: - Meshes: + メッシュ: @@ -727,12 +730,12 @@ Nodes: 0 - Nodes: 0 + ノード: 0 Poly - Poly + ポリゴン @@ -742,7 +745,7 @@ Pick - Pick + ピック @@ -752,17 +755,17 @@ Angle-search - Angle-search + 角度を検索 Collect adjancent nodes - Collect adjancent nodes + 隣接する頂点を集める Stop angle: - Stop angle: + 停止角度 @@ -783,7 +786,8 @@ Add reference - Add reference + 参照を追加 + @@ -793,12 +797,12 @@ Diameter - Diameter + 直径 Other diameter - Other diameter + その他の直径 @@ -836,17 +840,18 @@ Add reference - Add reference + 参照を追加 + Gear diameter - Gear diameter + 歯車の直径 Other pulley dia - Other pulley dia + その他の滑車直径 @@ -856,7 +861,7 @@ Force - Force + 加力 @@ -866,27 +871,27 @@ Driven pulley - Driven pulley + 駆動プーリー Force location [deg] - Force location [deg] + 加力位置 [度] Force Direction - Force Direction + 荷重方向 Reversed direction - Reversed direction + 逆方向 Axial free - Axial free + 軸方向は非拘束 @@ -909,7 +914,8 @@ Add reference - Add reference + 参照を追加 + @@ -922,7 +928,8 @@ Add reference - Add reference + 参照を追加 + @@ -958,12 +965,12 @@ Max. Size: - Max. Size: + 最大サイズ: Second order - Second order + 2次精度 @@ -973,7 +980,7 @@ VeryCoarse - かなり粗い + 非常に粗い @@ -993,7 +1000,7 @@ VeryFine - かなり細かい + 非常に細かい @@ -1003,17 +1010,17 @@ Growth Rate: - Growth Rate: + 増加率: Nbr. Segs per Edge: - Nbr. Segs per Edge: + エッジあたりのセグメント数 Nbr. Segs per Radius: - Nbr. Segs per Radius: + 半径あたりのセグメント数 diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.qm index 5e32bc4634..2658c89b28 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts index e7b177efe0..6576fff7de 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts @@ -176,7 +176,7 @@ Quadrangle - Quadrangle + Vierhoek @@ -221,7 +221,7 @@ You must specify at least one reference - You must specify at least one reference + U moet minstens 1 referentie specifiëren @@ -235,7 +235,7 @@ FemGui::TaskDlgFemConstraintForce - + Input error Invoerfout @@ -287,7 +287,7 @@ Selection error - Selection error + Selectie fout @@ -331,7 +331,7 @@ Selection error - Selection error + Selectie fout @@ -347,36 +347,24 @@ FemGui::TaskFemConstraintForce - + Delete Verwijderen - - Force [N] - Force [N] - - - Force [N/mm] - Force [N/mm] - - - Force [N/mm²] - Force [N/mm²] - Point load [N] - + Point load [N] Line load [N/mm] - + Line load [N/mm] Area load [N/mm²] - + Area load [N/mm²] @@ -385,7 +373,7 @@ Selection error - Selection error + Selectie fout @@ -420,7 +408,7 @@ Selection error - Selection error + Selectie fout @@ -443,12 +431,12 @@ Pulley diameter - Pulley diameter + Katroldiameter Torque [Nm] - Torque [Nm] + Koppel [Nm] @@ -472,7 +460,7 @@ Mechanical analysis - Mechanical analysis + Mechanische analyse @@ -481,23 +469,33 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix - Run Calculix + Calculix draaien Time: - Time: + Tijd: Mechanical material - Mechanical material + Mechanisch materiaal choose... - choose... + Kies... @@ -507,7 +505,7 @@ Young's Modulus: - Young's Modulus: + Modulus van Young: @@ -517,7 +515,7 @@ Poisson Ratio: - Poisson Ratio: + Poisson verhouding: @@ -525,12 +523,12 @@ No active Analysis - No active Analysis + Geen actieve analyse You need to create or activate a Analysis - You need to create or activate a Analysis + U moet een analyse maken of activeren @@ -544,7 +542,7 @@ Your FreeCAD is build without NETGEN support. Meshing will not work.... - Your FreeCAD is build without NETGEN support. Meshing will not work.... + Uw FreeCAD is gebouwd zonder NETGEN ondersteuning. Meshing zal niet werken.... @@ -577,7 +575,7 @@ Edit constraint - Edit constraint + Beperking bewerken @@ -628,6 +626,11 @@ Meshing Meshing + + + Constraint force + + ShowDisplacement @@ -676,7 +679,7 @@ Show - Show + Weergeven @@ -722,7 +725,7 @@ Surface - Surface + Oppervlak @@ -788,7 +791,7 @@ Load [N] - Load [N] + Belasting [N] @@ -798,7 +801,7 @@ Other diameter - Other diameter + Andere diameter @@ -861,7 +864,7 @@ Belt tension force - Belt tension force + Riem spankracht @@ -927,7 +930,7 @@ Load [N] - Load [N] + Belasting [N] @@ -958,47 +961,47 @@ Max. Size: - Max. Size: + Max. afmeting: Second order - Second order + Tweede orde Fineness: - Fineness: + Fijnheid: VeryCoarse - VeryCoarse + ZeerRuw Coarse - Coarse + Ruw Moderate - Moderate + Normaal Fine - Fine + Fijn VeryFine - VeryFine + ZeerFijn UserDefined - UserDefined + GebruikersGedefinieerd @@ -1018,7 +1021,7 @@ Optimize - Optimize + Optimaliseren @@ -1028,7 +1031,7 @@ Triangle count: - Triangle count: + Aantal driehoeken: diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_no.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_no.qm index 40bd59ef23..a26eee3ea3 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_no.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_no.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_no.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_no.ts index 440e66625c..40c7d5b7d8 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_no.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_no.ts @@ -12,7 +12,7 @@ Add a part to the Analysis - Add a part to the Analysis + Legg til en del til analysen @@ -216,7 +216,7 @@ Input error - Input error + Inndatafeil @@ -229,15 +229,15 @@ Input error - Input error + Inndatafeil FemGui::TaskDlgFemConstraintForce - + Input error - Input error + Inndatafeil @@ -245,7 +245,7 @@ Input error - Input error + Inndatafeil @@ -253,7 +253,7 @@ Input error - Input error + Inndatafeil @@ -347,36 +347,24 @@ FemGui::TaskFemConstraintForce - + Delete Slett - - Force [N] - Force [N] - - - Force [N/mm] - Force [N/mm] - - - Force [N/mm²] - Force [N/mm²] - Point load [N] - + Point load [N] Line load [N/mm] - + Line load [N/mm] Area load [N/mm²] - + Area load [N/mm²] @@ -481,6 +469,16 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix Run Calculix @@ -628,6 +626,11 @@ Meshing Meshing + + + Constraint force + + ShowDisplacement @@ -783,7 +786,7 @@ Add reference - Add reference + Legg til referanse @@ -836,7 +839,7 @@ Add reference - Add reference + Legg til referanse @@ -909,7 +912,7 @@ Add reference - Add reference + Legg til referanse @@ -922,7 +925,7 @@ Add reference - Add reference + Legg til referanse diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm index a43f9ccbe5..585fe4a202 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts index 2d690cb65c..6eca316cc8 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts @@ -12,7 +12,7 @@ Add a part to the Analysis - Add a part to the Analysis + Dodaj część do analizy @@ -25,12 +25,12 @@ Create FEM bearing constraint - Create FEM bearing constraint + Utwórz wiązania MES łożysk Create FEM constraint for a bearing - Create FEM constraint for a bearing + Stwórz wiązania MES dla łożyska @@ -43,12 +43,12 @@ Create FEM fixed constraint - Create FEM fixed constraint + Stwórz stałe wiązanie MES Create FEM constraint for a fixed geometric entity - Create FEM constraint for a fixed geometric entity + Utwórz wiązanie MES dla stałego obiektu geometrycznego @@ -61,12 +61,12 @@ Create FEM force constraint - Create FEM force constraint + Utwórz wiązania MES siły Create FEM constraint for a force acting on a geometric entity - Create FEM constraint for a force acting on a geometric entity + Stwórz wiązanie MES dla siły oddziaływającej na obiekt geometryczny @@ -79,12 +79,12 @@ Create FEM gear constraint - Create FEM gear constraint + Utwórz wiązania MES przekładni Create FEM constraint for a gear - Create FEM constraint for a gear + Utwórz wiązania MES dla przekładni @@ -97,12 +97,12 @@ Create FEM pulley constraint - Create FEM pulley constraint + Utwórz wiązania MES koła pasowego Create FEM constraint for a pulley - Create FEM constraint for a pulley + Utwórz wiązania MES dla koła pasowego @@ -116,7 +116,7 @@ Create a FEM analysis - Create a FEM analysis + Utwórz analizę metodą FEM @@ -129,12 +129,12 @@ Create FEM mesh - Tworzenie siatki + Tworzenie siatki MES Create FEM mesh from shape - Tworzenie siatki z kształtu + Tworzenie siatki MES z kształtu @@ -148,7 +148,7 @@ Define/create a nodes set... - Define/create a nodes set... + Zdefiniuj/utwórz system węzłów... @@ -163,7 +163,7 @@ Create node set by Poly - Create node set by Poly + Utwórz system węzłów metodą Poly @@ -199,7 +199,7 @@ Nodes set - Nodes set + System węzłów @@ -207,7 +207,7 @@ Nodes set - Nodes set + System węzłów @@ -221,7 +221,7 @@ You must specify at least one reference - You must specify at least one reference + Należy określić co najmniej jedno odniesienie @@ -235,7 +235,7 @@ FemGui::TaskDlgFemConstraintForce - + Input error Błąd danych wejściowych @@ -261,7 +261,7 @@ Nodes set - Nodes set + System węzłów @@ -269,7 +269,7 @@ FEM constraint parameters - FEM constraint parameters + Parametry ograniczeń FEM @@ -287,37 +287,37 @@ Selection error - Selection error + Selekcja błedów Please use only a single reference for bearing constraint - Please use only a single reference for bearing constraint + Proszę użyć tylko jednego odniesienia dla punktu podparcia Only faces can be picked - Only faces can be picked + Wybrać można tylko powierzchnie Only cylindrical faces can be picked - Only cylindrical faces can be picked + Wybrać można tylko powierzchnie cylindryczne Only planar faces can be picked - Only planar faces can be picked + Wybrać można tylko powierzchnie płaskie Only linear edges can be picked - Only linear edges can be picked + Wybrać można tylko krawędzie liniowe Only faces and edges can be picked - Only faces and edges can be picked + Wybrać można tylko powierzchnie i krawędzie @@ -331,52 +331,40 @@ Selection error - Selection error + Selekcja błedów Mixed shape types are not possible. Use a second constraint instead - Mixed shape types are not possible. Use a second constraint instead + Kształty typu mieszanego nie są możliwe do użycia. Użyj drugiego ograniczenia Only faces, edges and vertices can be picked - Only faces, edges and vertices can be picked + Tylko powierzchnie, krawędzie i wierzchołki mogą być wybrane FemGui::TaskFemConstraintForce - + Delete Usuń - - Force [N] - Force [N] - - - Force [N/mm] - Force [N/mm] - - - Force [N/mm²] - Force [N/mm²] - Point load [N] - + Point load [N] Line load [N/mm] - + Line load [N/mm] Area load [N/mm²] - + Area load [N/mm²] @@ -385,32 +373,32 @@ Selection error - Selection error + Selekcja błedów Mixed shape types are not possible. Use a second constraint instead - Mixed shape types are not possible. Use a second constraint instead + Kształty typu mieszanego nie są możliwe do użycia. Użyj drugiego ograniczenia Only faces, edges and vertices can be picked - Only faces, edges and vertices can be picked + Tylko powierzchnie, krawędzie i wierzchołki mogą być wybrane Only planar faces can be picked - Only planar faces can be picked + Wybrać można tylko powierzchnie płaskie Only linear edges can be picked - Only linear edges can be picked + Wybrać można tylko krawędzie liniowe Only faces and edges can be picked - Only faces and edges can be picked + Wybrać można tylko powierzchnie i krawędzie @@ -420,22 +408,22 @@ Selection error - Selection error + Selekcja błedów Only planar faces can be picked - Only planar faces can be picked + Wybrać można tylko powierzchnie płaskie Only linear edges can be picked - Only linear edges can be picked + Wybrać można tylko krawędzie liniowe Only faces and edges can be picked - Only faces and edges can be picked + Wybrać można tylko powierzchnie i krawędzie @@ -443,12 +431,12 @@ Pulley diameter - Pulley diameter + Średnica koła pasowego Torque [Nm] - Torque [Nm] + Moment obrotowy [Nm] @@ -456,7 +444,7 @@ TaskObjectName - TaskObjectName + Zadaj nazwę obiektu @@ -464,7 +452,7 @@ Tet Parameter - Tet Parameter + Parametr Tet @@ -472,7 +460,7 @@ Mechanical analysis - Mechanical analysis + Analiza mechaniczna @@ -481,8 +469,18 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix - Run Calculix + Uruchom Calculix @@ -492,7 +490,7 @@ Mechanical material - Mechanical material + Materiał mechaniczny @@ -502,22 +500,22 @@ MatWeb database... - MatWeb database... + Baza danych MatWeb... Young's Modulus: - Young's Modulus: + Moduł Younga: Pa - Pa + Paskal [Pa] Poisson Ratio: - Poisson Ratio: + Współczynnik Poisson'a: @@ -525,12 +523,12 @@ No active Analysis - No active Analysis + Brak aktywnej analizy You need to create or activate a Analysis - You need to create or activate a Analysis + Należy stworzyć lub aktywować analizę @@ -544,7 +542,7 @@ Your FreeCAD is build without NETGEN support. Meshing will not work.... - Your FreeCAD is build without NETGEN support. Meshing will not work.... + Twój FreeCAD jest zainstalowany bez wsparcia dla NETGEN. Siatka nie będzie działać... @@ -577,7 +575,7 @@ Edit constraint - Edit constraint + Edytuj ograniczenia @@ -598,12 +596,12 @@ ShaftWizard - ShaftWizard + Kreator wałów ShaftWizardLayout - ShaftWizardLayout + Kreator układów wałów @@ -626,7 +624,12 @@ Meshing - Meshing + Tworzenie siatki + + + + Constraint force + @@ -634,7 +637,7 @@ Show result - Show result + Pokaż wynik @@ -681,12 +684,12 @@ Factor: - Factor: + Współczynnik: Slider max: - Slider max: + Suwak max: @@ -699,7 +702,7 @@ Meshes: - Meshes: + Oczka siatki: @@ -717,7 +720,7 @@ Volume - Volume + Objętość @@ -732,7 +735,7 @@ Poly - Poly + Poli @@ -742,7 +745,7 @@ Pick - Pick + Wybierz @@ -752,17 +755,17 @@ Angle-search - Angle-search + Szukaj kąt Collect adjancent nodes - Collect adjancent nodes + Zbierz przylegające węzły Stop angle: - Stop angle: + Kąt zatrzymania: @@ -783,12 +786,12 @@ Add reference - Add reference + Dodaj odniesienie Load [N] - Load [N] + Obciążenie [N] @@ -798,12 +801,12 @@ Other diameter - Other diameter + Inna średnica Center distance - Center distance + Odległość od środka @@ -836,22 +839,22 @@ Add reference - Add reference + Dodaj odniesienie Gear diameter - Gear diameter + Średnica koła zębatego Other pulley dia - Other pulley dia + Inna średnica koła pasowego Center distance - Center distance + Odległość od środka @@ -861,17 +864,17 @@ Belt tension force - Belt tension force + Siła naciągu paska Driven pulley - Driven pulley + Napędzane koło pasowe Force location [deg] - Force location [deg] + Położenie siły [deg] @@ -881,12 +884,12 @@ Reversed direction - Reversed direction + Odwrócone kierunki Axial free - Axial free + Wolne osiowo @@ -909,7 +912,7 @@ Add reference - Add reference + Dodaj odniesienie @@ -922,12 +925,12 @@ Add reference - Add reference + Dodaj odniesienie Load [N] - Load [N] + Obciążenie [N] @@ -958,82 +961,82 @@ Max. Size: - Max. Size: + Rozmiar max.: Second order - Second order + Drugiego rzędu Fineness: - Fineness: + Stopień rozdrobnienia: VeryCoarse - VeryCoarse + Bardzo zgrubnie Coarse - Coarse + Zgrubnie Moderate - Moderate + Umiarkowanie Fine - Fine + Drobno VeryFine - VeryFine + Bardzo drobno UserDefined - UserDefined + Zdefiniowane przez użytkownika Growth Rate: - Growth Rate: + Współczynnik wzrostu: Nbr. Segs per Edge: - Nbr. Segs per Edge: + Liczba segmentów na krawędź: Nbr. Segs per Radius: - Nbr. Segs per Radius: + Liczba segmentów na promień: Optimize - Optimize + Optymalizacji Node count: - Node count: + Liczba węzłów: Triangle count: - Triangle count: + Liczba trójkątów: Tetraeder count: - Tetraeder count: + Liczba tetraedrów: diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.qm index 2f419f6562..af1f252bb3 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts index 94fafb8c5c..34be72a388 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts @@ -235,7 +235,7 @@ FemGui::TaskDlgFemConstraintForce - + Input error Erro de entrada @@ -347,36 +347,24 @@ FemGui::TaskFemConstraintForce - + Delete Excluir - - Force [N] - Força [N] - - - Force [N/mm] - Força [N/mm] - - - Force [N/mm²] - Força [N/mm ²] - Point load [N] - + Carga pontual [N] Line load [N/mm] - + Carga linear [M/mm] Area load [N/mm²] - + Carga de área [N/mm²] @@ -481,6 +469,16 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix Executar Calculix @@ -628,6 +626,11 @@ Meshing Conversão em malhas + + + Constraint force + + ShowDisplacement diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm index 7b4569783e..3d99b146f4 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts index 5ff0bfaf9c..5a49dac04f 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts @@ -12,7 +12,7 @@ Add a part to the Analysis - Adicionar uma peça para a análise + Adicionar uma parte para a análise @@ -61,12 +61,12 @@ Create FEM force constraint - Create FEM force constraint + Criar restrição de força MEF Create FEM constraint for a force acting on a geometric entity - Create FEM constraint for a force acting on a geometric entity + Criar restrição MEF para uma força a atuar numa entidade geométrica @@ -79,12 +79,12 @@ Create FEM gear constraint - Create FEM gear constraint + Criar restrição de engrenagem MEF Create FEM constraint for a gear - Create FEM constraint for a gear + Criar restrição MEF para uma engrenagem @@ -97,12 +97,12 @@ Create FEM pulley constraint - Create FEM pulley constraint + Criar restrição de polia MEF Create FEM constraint for a pulley - Create FEM constraint for a pulley + Criar restrição FEM para uma polia @@ -116,7 +116,7 @@ Create a FEM analysis - Create a FEM analysis + Criar uma análise MEF @@ -186,7 +186,7 @@ Local length - Comprimento do local + Comprimento local @@ -221,7 +221,7 @@ You must specify at least one reference - You must specify at least one reference + Deve especificar pelo menos uma referência @@ -235,7 +235,7 @@ FemGui::TaskDlgFemConstraintForce - + Input error Erro de Inserção @@ -287,7 +287,7 @@ Selection error - Selection error + Erro de seleção @@ -297,27 +297,27 @@ Only faces can be picked - Only faces can be picked + Só podem ser selecionadas faces Only cylindrical faces can be picked - Only cylindrical faces can be picked + Somente as faces cilíndricas podem ser selecionadas Only planar faces can be picked - Only planar faces can be picked + Apenas faces planas podem ser selecionadas Only linear edges can be picked - Only linear edges can be picked + Apenas arestas lineares podem ser selecionadas Only faces and edges can be picked - Only faces and edges can be picked + Apenas podem ser selecionadas faces e arestas @@ -331,52 +331,40 @@ Selection error - Selection error + Erro de seleção Mixed shape types are not possible. Use a second constraint instead - Mixed shape types are not possible. Use a second constraint instead + Tipos de forma mixtos não são possíveis. Use em vez disso uma segunda restrição Only faces, edges and vertices can be picked - Only faces, edges and vertices can be picked + Apenas faces, arestas e vértices podem ser selecionados FemGui::TaskFemConstraintForce - + Delete Apagar - - Force [N] - Force [N] - - - Force [N/mm] - Force [N/mm] - - - Force [N/mm²] - Force [N/mm²] - Point load [N] - + Point load [N] Line load [N/mm] - + Line load [N/mm] Area load [N/mm²] - + Area load [N/mm²] @@ -385,32 +373,32 @@ Selection error - Selection error + Erro de seleção Mixed shape types are not possible. Use a second constraint instead - Mixed shape types are not possible. Use a second constraint instead + Tipos de forma mixtos não são possíveis. Use em vez disso uma segunda restrição Only faces, edges and vertices can be picked - Only faces, edges and vertices can be picked + Apenas faces, arestas e vértices podem ser selecionados Only planar faces can be picked - Only planar faces can be picked + Apenas faces planas podem ser selecionadas Only linear edges can be picked - Only linear edges can be picked + Apenas arestas lineares podem ser selecionadas Only faces and edges can be picked - Only faces and edges can be picked + Apenas podem ser selecionadas faces e arestas @@ -420,22 +408,22 @@ Selection error - Selection error + Erro de seleção Only planar faces can be picked - Only planar faces can be picked + Apenas faces planas podem ser selecionadas Only linear edges can be picked - Only linear edges can be picked + Apenas arestas lineares podem ser selecionadas Only faces and edges can be picked - Only faces and edges can be picked + Apenas podem ser selecionadas faces e arestas @@ -443,7 +431,7 @@ Pulley diameter - Pulley diameter + Diâmetro da polia @@ -472,7 +460,7 @@ Mechanical analysis - Mechanical analysis + Análise mecânica @@ -481,13 +469,23 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix Run Calculix Time: - Time: + Tempo: @@ -497,7 +495,7 @@ choose... - choose... + escolha... @@ -525,12 +523,12 @@ No active Analysis - No active Analysis + Nenhuma análise ativa You need to create or activate a Analysis - You need to create or activate a Analysis + É preciso criar ou ativar uma Análise @@ -544,7 +542,7 @@ Your FreeCAD is build without NETGEN support. Meshing will not work.... - Your FreeCAD is build without NETGEN support. Meshing will not work.... + O seu FreeCAD está construído sem suporte NETGEN. A emalhagem não vai funcionar.... @@ -626,7 +624,12 @@ Meshing - Meshing + Emalhar + + + + Constraint force + @@ -634,7 +637,7 @@ Show result - Show result + Mostrar resultado @@ -664,7 +667,7 @@ Avg: - Avg: + Média: @@ -676,12 +679,12 @@ Show - Show + Mostrar Factor: - Factor: + Fator: @@ -699,7 +702,7 @@ Meshes: - Meshes: + Malhas: @@ -722,17 +725,17 @@ Surface - Surface + Superfície Nodes: 0 - Nodes: 0 + Nós:0 Poly - Poly + Polia @@ -742,7 +745,7 @@ Pick - Pick + Escolher @@ -762,7 +765,7 @@ Stop angle: - Stop angle: + Ângulo de paragem: @@ -783,12 +786,12 @@ Add reference - Add reference + Adicionar referência Load [N] - Load [N] + Carga [N] @@ -798,12 +801,12 @@ Other diameter - Other diameter + Outro diâmetro Center distance - Center distance + Distância do centro @@ -818,7 +821,7 @@ Location - Location + Local @@ -836,32 +839,32 @@ Add reference - Add reference + Adicionar referência Gear diameter - Gear diameter + Diâmetro da engrenagem Other pulley dia - Other pulley dia + Outro diâmetro de polia Center distance - Center distance + Distância do centro Force - Force + Força Belt tension force - Belt tension force + Força de tensão da correia @@ -871,17 +874,17 @@ Force location [deg] - Force location [deg] + Localização da força [graus] Force Direction - Force Direction + Direção da força Reversed direction - Reversed direction + Direção invertida @@ -891,7 +894,7 @@ Location - Location + Local @@ -909,7 +912,7 @@ Add reference - Add reference + Adicionar referência @@ -922,12 +925,12 @@ Add reference - Add reference + Adicionar referência Load [N] - Load [N] + Carga [N] @@ -958,12 +961,12 @@ Max. Size: - Max. Size: + Tamanho max: Second order - Second order + Segunda ordem @@ -973,22 +976,22 @@ VeryCoarse - VeryCoarse + Muito Grosseiro Coarse - Coarse + Grosso Moderate - Moderate + Moderado Fine - Fine + Fino @@ -998,42 +1001,42 @@ UserDefined - UserDefined + Definido pelo Utilizador Growth Rate: - Growth Rate: + Taxa de crescimento: Nbr. Segs per Edge: - Nbr. Segs per Edge: + Número de segundos por aresta: Nbr. Segs per Radius: - Nbr. Segs per Radius: + Nº Seg. por Raio: Optimize - Optimize + Ótimizar Node count: - Node count: + Contagem de nós: Triangle count: - Triangle count: + Contagem de triângulos: Tetraeder count: - Tetraeder count: + Contagem de Tetraedros: diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.qm index 1aec4d07e9..0c5f55a95b 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts index 91ab5d25b9..2928545aa0 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts @@ -6,13 +6,13 @@ Fem - Fem + Metoda elementelor finite Add a part to the Analysis - Add a part to the Analysis + Adăugaţi o parte la analiză @@ -20,7 +20,7 @@ Fem - Fem + Metoda elementelor finite @@ -38,7 +38,7 @@ Fem - Fem + Metoda elementelor finite @@ -56,7 +56,7 @@ Fem - Fem + Metoda elementelor finite @@ -74,7 +74,7 @@ Fem - Fem + Metoda elementelor finite @@ -92,7 +92,7 @@ Fem - Fem + Metoda elementelor finite @@ -110,13 +110,13 @@ Fem - Fem + Metoda elementelor finite Create a FEM analysis - Create a FEM analysis + Creează o analiză FEM @@ -124,17 +124,17 @@ Fem - Fem + Metoda elementelor finite Create FEM mesh - Creaza retea FEM + Crează rețea FEM Create FEM mesh from shape - Creaza retea FEM dintr-o forma + Crează rețea FEM dintr-o formă @@ -142,13 +142,13 @@ Fem - Fem + Metoda elementelor finite Define/create a nodes set... - Define/create a nodes set... + Definește/crează o configurare a nodurilor... @@ -156,7 +156,7 @@ Fem - Fem + Metoda elementelor finite @@ -171,7 +171,7 @@ Hypothesis - Ipoteza + Ipoteză @@ -221,7 +221,7 @@ You must specify at least one reference - You must specify at least one reference + Trebuie să specificați cel puțin o referință @@ -235,7 +235,7 @@ FemGui::TaskDlgFemConstraintForce - + Input error Eroare de intrare @@ -287,7 +287,7 @@ Selection error - Selection error + Eroare de selecție @@ -297,27 +297,27 @@ Only faces can be picked - Only faces can be picked + Numai fețele pot fi ridicate Only cylindrical faces can be picked - Only cylindrical faces can be picked + Numai fețele cilindrice pot fi ridicate Only planar faces can be picked - Only planar faces can be picked + Numai fețele plane pot fi ridicate Only linear edges can be picked - Only linear edges can be picked + Numai marginile liniare pot fi ridicate Only faces and edges can be picked - Only faces and edges can be picked + Numai fețe și margini pot fi ridicate @@ -331,7 +331,7 @@ Selection error - Selection error + Eroare de selecție @@ -347,36 +347,24 @@ FemGui::TaskFemConstraintForce - + Delete Ştergeţi - - Force [N] - Force [N] - - - Force [N/mm] - Force [N/mm] - - - Force [N/mm²] - Force [N/mm²] - Point load [N] - + Point load [N] Line load [N/mm] - + Line load [N/mm] Area load [N/mm²] - + Area load [N/mm²] @@ -385,7 +373,7 @@ Selection error - Selection error + Eroare de selecție @@ -400,17 +388,17 @@ Only planar faces can be picked - Only planar faces can be picked + Numai fețele plane pot fi ridicate Only linear edges can be picked - Only linear edges can be picked + Numai marginile liniare pot fi ridicate Only faces and edges can be picked - Only faces and edges can be picked + Numai fețe și margini pot fi ridicate @@ -420,22 +408,22 @@ Selection error - Selection error + Eroare de selecție Only planar faces can be picked - Only planar faces can be picked + Numai fețele plane pot fi ridicate Only linear edges can be picked - Only linear edges can be picked + Numai marginile liniare pot fi ridicate Only faces and edges can be picked - Only faces and edges can be picked + Numai fețe și margini pot fi ridicate @@ -443,12 +431,12 @@ Pulley diameter - Pulley diameter + Diametru scripete Torque [Nm] - Torque [Nm] + Cuplul [Nm] @@ -464,7 +452,7 @@ Tet Parameter - Tet Parameter + Parametru tet @@ -472,7 +460,7 @@ Mechanical analysis - Mechanical analysis + Analiză mecanică @@ -481,28 +469,38 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix - Run Calculix + Rulează Calculix Time: - Time: + Timp: Mechanical material - Mechanical material + Material mecanic choose... - choose... + alege... MatWeb database... - MatWeb database... + Baza de date MatWeb... @@ -525,12 +523,12 @@ No active Analysis - No active Analysis + Nu sunt analize active You need to create or activate a Analysis - You need to create or activate a Analysis + Trebuie să creați sau să activați o analiză @@ -544,7 +542,7 @@ Your FreeCAD is build without NETGEN support. Meshing will not work.... - Your FreeCAD is build without NETGEN support. Meshing will not work.... + Versiunea dumneavoastră Free Cad este construită fără suport NETGEN. Conectarea în rețea nu va funcționa.... @@ -577,7 +575,7 @@ Edit constraint - Edit constraint + Editare restricţie @@ -612,7 +610,7 @@ A dialog is already open in the task panel - O fereastra de dialog este deja deschisa in fereastra de sarcini + O fereastră de dialog este deja deschisă în fereastra de sarcini @@ -621,20 +619,25 @@ Do you want to close this dialog? - Doriti sa inchideti aceasta fereastra de dialog? + Doriţi să închideţi această fereastră de dialog? Meshing Meshing + + + Constraint force + + ShowDisplacement Show result - Show result + Arată rezultatul @@ -664,7 +667,7 @@ Avg: - Avg: + Medie: @@ -676,7 +679,7 @@ Show - Show + Arată @@ -717,22 +720,22 @@ Volume - Volume + Volum Surface - Surface + Suprafață Nodes: 0 - Nodes: 0 + Noduri: 0 Poly - Poly + Poligon @@ -742,7 +745,7 @@ Pick - Pick + Alege @@ -752,7 +755,7 @@ Angle-search - Angle-search + Căutare-unghi @@ -762,7 +765,7 @@ Stop angle: - Stop angle: + Oprire unghi: @@ -783,27 +786,27 @@ Add reference - Add reference + Adaugă referinţă Load [N] - Load [N] + Încărcare [N] Diameter - Diameter + Diametru Other diameter - Other diameter + Alte diametru Center distance - Center distance + Centrul distanței @@ -836,12 +839,12 @@ Add reference - Add reference + Adaugă referinţă Gear diameter - Gear diameter + Diametru roată dințată @@ -851,17 +854,17 @@ Center distance - Center distance + Centrul distanței Force - Force + Forță Belt tension force - Belt tension force + Forță tensiune centură @@ -871,22 +874,22 @@ Force location [deg] - Force location [deg] + Forțează locația [deg] Force Direction - Force Direction + Forțează direcția Reversed direction - Reversed direction + Direcţie inversă Axial free - Axial free + Axial liber @@ -909,7 +912,7 @@ Add reference - Add reference + Adaugă referinţă @@ -922,12 +925,12 @@ Add reference - Add reference + Adaugă referinţă Load [N] - Load [N] + Încărcare [N] @@ -958,52 +961,52 @@ Max. Size: - Max. Size: + Dimensiune maximă: Second order - Second order + A doua comandă Fineness: - Fineness: + Finețe: VeryCoarse - VeryCoarse + Foarte brut Coarse - Coarse + Brut Moderate - Moderate + Moderat Fine - Fine + Fin VeryFine - VeryFine + Foarte fin UserDefined - UserDefined + Definit de utilizator Growth Rate: - Growth Rate: + Rată de creştere: @@ -1018,22 +1021,22 @@ Optimize - Optimize + Optimizează Node count: - Node count: + Numărul de nod: Triangle count: - Triangle count: + Numărul de triunghiuri: Tetraeder count: - Tetraeder count: + Numărul de tetraedre: diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm index dd8bf2cb19..474a6a84ab 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts index 99f102be3d..a14b2de2fc 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts @@ -235,7 +235,7 @@ FemGui::TaskDlgFemConstraintForce - + Input error Ошибка ввода @@ -347,36 +347,24 @@ FemGui::TaskFemConstraintForce - + Delete Удалить - - Force [N] - Силы [N] - - - Force [N/mm] - Силы [Н/мм] - - - Force [N/mm²] - Силы [Н/мм²] - Point load [N] - + Point load [N] Line load [N/mm] - + Line load [N/mm] Area load [N/mm²] - + Area load [N/mm²] @@ -481,6 +469,16 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix Запустить Calculix @@ -628,6 +626,11 @@ Meshing Meshing + + + Constraint force + + ShowDisplacement @@ -717,7 +720,7 @@ Volume - Volume + значение @@ -793,7 +796,7 @@ Diameter - Diameter + Диаметр @@ -1008,12 +1011,12 @@ Nbr. Segs per Edge: - Nbr. Segs per Edge: + Количество сегментов на грань: Nbr. Segs per Radius: - Nbr. Segs per Radius: + Количество сегментов на радиус: @@ -1023,7 +1026,7 @@ Node count: - Node count: + Счетчик узлов: diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sk.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sk.ts index ff92553607..4ce9a6fe77 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sk.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sk.ts @@ -235,7 +235,7 @@ FemGui::TaskDlgFemConstraintForce - + Input error Vstupná chyba @@ -347,7 +347,7 @@ FemGui::TaskFemConstraintForce - + Delete Odstrániť @@ -481,6 +481,16 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix Run Calculix @@ -628,6 +638,11 @@ Meshing Meshing + + + Constraint force + + ShowDisplacement diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.qm new file mode 100644 index 0000000000..7d8e855eec Binary files /dev/null and b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts new file mode 100644 index 0000000000..e337493a53 --- /dev/null +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts @@ -0,0 +1,1055 @@ + + + + + CmdFemAddPart + + + Fem + Fem + + + + + Add a part to the Analysis + Додај део у Анализу + + + + CmdFemConstraintBearing + + + Fem + Fem + + + + Create FEM bearing constraint + Направи МКЕ ограничење лежаја + + + + Create FEM constraint for a bearing + Направи МКЕ ограничење за лежај + + + + CmdFemConstraintFixed + + + Fem + Fem + + + + Create FEM fixed constraint + Направи МКЕ фикcирано ограничење + + + + Create FEM constraint for a fixed geometric entity + Направи МКЕ ограничење за фикcиран геометријcки ентитет + + + + CmdFemConstraintForce + + + Fem + Fem + + + + Create FEM force constraint + Направи МКЕ ограничење cиле + + + + Create FEM constraint for a force acting on a geometric entity + Направи МКЕ ограничење за cилу која делује на геометријcки ентитет + + + + CmdFemConstraintGear + + + Fem + Fem + + + + Create FEM gear constraint + Направи МКЕ ограничење зупчаника + + + + Create FEM constraint for a gear + Направи МКЕ ограничење за зупчаник + + + + CmdFemConstraintPulley + + + Fem + Fem + + + + Create FEM pulley constraint + Направи МКЕ ограничење ременице + + + + Create FEM constraint for a pulley + Направи МКЕ ограничење за ременицу + + + + CmdFemCreateAnalysis + + + Fem + Fem + + + + + Create a FEM analysis + Направи МКЕ анализу + + + + CmdFemCreateFromShape + + + Fem + Fem + + + + Create FEM mesh + Направи FEM мрежу + + + + Create FEM mesh from shape + Направите FEM мрежу из облика + + + + CmdFemCreateNodesSet + + + Fem + Fem + + + + + Define/create a nodes set... + Define/create a nodes set... + + + + CmdFemDefineNodesSet + + + Fem + Fem + + + + + + Create node set by Poly + Create node set by Poly + + + + FemGui::HypothesisWidget + + + Hypothesis + Хипотеза + + + + Quadrangle + Четвероугао + + + + Maximum length + Максимална дужина + + + + Local length + Локална дужина + + + + Maximum element area + Максимална површина елемента + + + + FemGui::TaskAnalysisInfo + + + Nodes set + Nodes set + + + + FemGui::TaskCreateNodeSet + + + Nodes set + Nodes set + + + + FemGui::TaskDlgFemConstraint + + + + Input error + Грешка приликом уноса + + + + You must specify at least one reference + Морате навеcти бар једну референцу + + + + FemGui::TaskDlgFemConstraintBearing + + + Input error + Грешка приликом уноса + + + + FemGui::TaskDlgFemConstraintForce + + + Input error + Грешка приликом уноса + + + + FemGui::TaskDlgFemConstraintGear + + + Input error + Грешка приликом уноса + + + + FemGui::TaskDlgFemConstraintPulley + + + Input error + Грешка приликом уноса + + + + FemGui::TaskDriver + + + Nodes set + Nodes set + + + + FemGui::TaskFemConstraint + + + FEM constraint parameters + МКЕ параметри ограничења + + + + FemGui::TaskFemConstraintBearing + + + Delete + Обриши + + + + + + + + + Selection error + Грешка приликом избора + + + + Please use only a single reference for bearing constraint + Молим кориcтите cамо једну референцу за ограничење лежаја + + + + Only faces can be picked + Cамо cе површи могу одабрати + + + + Only cylindrical faces can be picked + Cамо cе могу одабрати цилиндричне површи + + + + Only planar faces can be picked + Могу cе одабрати cамо равне површи + + + + Only linear edges can be picked + Only linear edges can be picked + + + + Only faces and edges can be picked + Могу cе одабрати cамо површи и рубови + + + + FemGui::TaskFemConstraintFixed + + + Delete + Обриши + + + + + Selection error + Грешка приликом избора + + + + Mixed shape types are not possible. Use a second constraint instead + Mixed shape types are not possible. Use a second constraint instead + + + + Only faces, edges and vertices can be picked + Могу cе одабрати cамо површи, рубови и темена + + + + FemGui::TaskFemConstraintForce + + + Delete + Обриши + + + + Point load [N] + Отерећење тачке [N] + + + + Line load [N/mm] + Оптерећење линије [N/mm] + + + + Area load [N/mm²] + Оптерећење облаcти [N/mm²] + + + + + + + + Selection error + Грешка приликом избора + + + + Mixed shape types are not possible. Use a second constraint instead + Mixed shape types are not possible. Use a second constraint instead + + + + Only faces, edges and vertices can be picked + Могу cе одабрати cамо површи, рубови и темена + + + + Only planar faces can be picked + Могу cе одабрати cамо равне површи + + + + Only linear edges can be picked + Only linear edges can be picked + + + + Only faces and edges can be picked + Могу cе одабрати cамо површи и рубови + + + + FemGui::TaskFemConstraintGear + + + + + Selection error + Грешка приликом избора + + + + Only planar faces can be picked + Могу cе одабрати cамо равне површи + + + + Only linear edges can be picked + Only linear edges can be picked + + + + Only faces and edges can be picked + Могу cе одабрати cамо површи и рубови + + + + FemGui::TaskFemConstraintPulley + + + Pulley diameter + Пречник ременице + + + + Torque [Nm] + Обртни моменат [Nm] + + + + FemGui::TaskObjectName + + + TaskObjectName + TaskObjectName + + + + FemGui::TaskTetParameter + + + Tet Parameter + Tet Parameter + + + + MechanicalMaterial + + + Mechanical analysis + Механичка анализа + + + + ... + ... + + + + Write Calculix Input File + + + + + Edit Calculix Input File + + + + + Run Calculix + Run Calculix + + + + Time: + Време: + + + + Mechanical material + Механички материјал + + + + choose... + изабери... + + + + MatWeb database... + MatWeb database... + + + + Young's Modulus: + Young's Modulus: + + + + Pa + Pa + + + + Poisson Ratio: + Poisson Ratio: + + + + QObject + + + No active Analysis + Нема активних Анализа + + + + You need to create or activate a Analysis + Потребно је да креирате,или активирате Анализу + + + + + + + Wrong selection + Погрешан избор + + + + + Your FreeCAD is build without NETGEN support. Meshing will not work.... + Your FreeCAD is build without NETGEN support. Meshing will not work.... + + + + + Select an edge, face or body. Only one body is allowed. + Изабери ивицу,површ,или тело.Дозвољено је само једно тело. + + + + + Wrong object type + Погрешан тип објекта + + + + + Fillet works only on parts + Заобљење функционише само на деловима + + + + Ok + Уреду + + + + Cancel + Поништи + + + + Edit constraint + Уреди ограничење + + + + + Combo View + Комбиновани Преглед + + + + combiTab + combiTab + + + + qt_tabwidget_stackedwidget + qt_tabwidget_stackedwidget + + + + ShaftWizard + ShaftWizard + + + + ShaftWizardLayout + ShaftWizardLayout + + + + + + + + A dialog is already open in the task panel + A dialog is already open in the task panel + + + + + + + + Do you want to close this dialog? + Do you want to close this dialog? + + + + Meshing + Мрежење + + + + Constraint force + + + + + ShowDisplacement + + + Show result + Прикажи резултат + + + + Colors + Боје + + + + Displacement + Displacement + + + + Max: + Макс: + + + + Min: + Мин: + + + + None + Ниједан + + + + Avg: + Просек: + + + + + + mm + мм + + + + Show + Прикажи + + + + Factor: + Фактор: + + + + Slider max: + Slider max: + + + + TaskAnalysisInfo + + + Form + Form + + + + Meshes: + Мреже: + + + + Constraints + Constraints + + + + TaskCreateNodeSet + + + Form + Form + + + + Volume + Volume + + + + Surface + Површина + + + + Nodes: 0 + Nodes: 0 + + + + Poly + Poly + + + + Box + Box + + + + Pick + Pick + + + + Add + Додај + + + + Angle-search + Angle-search + + + + Collect adjancent nodes + Collect adjancent nodes + + + + Stop angle: + Stop angle: + + + + TaskDriver + + + Form + Form + + + + TaskFemConstraint + + + Form + Form + + + + Add reference + Add reference + + + + Load [N] + Load [N] + + + + Diameter + Пречник + + + + Other diameter + Other diameter + + + + Center distance + Center distance + + + + Direction + Правац + + + + Reverse direction + Reverse direction + + + + Location + Локација + + + + Distance + Distance + + + + TaskFemConstraintBearing + + + Form + Form + + + + Add reference + Add reference + + + + Gear diameter + Gear diameter + + + + Other pulley dia + Other pulley dia + + + + Center distance + Center distance + + + + Force + Сила + + + + Belt tension force + Belt tension force + + + + Driven pulley + Driven pulley + + + + Force location [deg] + Force location [deg] + + + + Force Direction + Правац Силе + + + + Reversed direction + Обрнут правац + + + + Axial free + Axial free + + + + Location + Локација + + + + Distance + Distance + + + + TaskFemConstraintFixed + + + Form + Form + + + + Add reference + Add reference + + + + TaskFemConstraintForce + + + Form + Form + + + + Add reference + Add reference + + + + Load [N] + Load [N] + + + + Direction + Правац + + + + Reverse direction + Reverse direction + + + + TaskObjectName + + + Form + Form + + + + TaskTetParameter + + + Form + Form + + + + Max. Size: + Макс.Величина: + + + + Second order + Second order + + + + Fineness: + Финоћа: + + + + VeryCoarse + Веома Грубо + + + + Coarse + Грубо + + + + Moderate + Средње + + + + Fine + Фино + + + + VeryFine + Веома Фино + + + + UserDefined + Дефинисано од стране корисника + + + + Growth Rate: + Cтопа Раcта: + + + + Nbr. Segs per Edge: + Nbr. Segs per Edge: + + + + Nbr. Segs per Radius: + Nbr. Segs per Radius: + + + + Optimize + Optimize + + + + Node count: + Node count: + + + + Triangle count: + Triangle count: + + + + Tetraeder count: + Tetraeder count: + + + + Workbench + + + FEM + FEM + + + + &FEM + &FEM + + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm index 764b067577..bcac38bc9b 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts index 92ff158056..bfa1eeb1dc 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts @@ -12,7 +12,7 @@ Add a part to the Analysis - Lägg till del till analysen + Lägg till en detalj till analysen @@ -235,7 +235,7 @@ FemGui::TaskDlgFemConstraintForce - + Input error Inmatningsfel @@ -347,36 +347,24 @@ FemGui::TaskFemConstraintForce - + Delete Radera - - Force [N] - Kraft [N] - - - Force [N/mm] - Kraft [N/mm] - - - Force [N/mm²] - Force [N/mm²] - Point load [N] - + Point load [N] Line load [N/mm] - + Line load [N/mm] Area load [N/mm²] - + Area load [N/mm²] @@ -481,6 +469,16 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix Run Calculix @@ -628,6 +626,11 @@ Meshing Meshing + + + Constraint force + + ShowDisplacement diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts index 450932e295..27f36122b0 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts @@ -235,7 +235,7 @@ FemGui::TaskDlgFemConstraintForce - + Input error Girdi hatası @@ -347,7 +347,7 @@ FemGui::TaskFemConstraintForce - + Delete Sil @@ -481,6 +481,16 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix Run Calculix @@ -628,6 +638,11 @@ Meshing Meshing + + + Constraint force + + ShowDisplacement diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.qm index d29c01cd8f..a467ad52a6 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts index e2c3717f4f..4f89cb937c 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts @@ -12,7 +12,7 @@ Add a part to the Analysis - Add a part to the Analysis + Додати частину до аналізу @@ -116,7 +116,7 @@ Create a FEM analysis - Create a FEM analysis + Створити МСЕ аналіз @@ -199,7 +199,7 @@ Nodes set - Nodes set + Набір вузлів @@ -207,7 +207,7 @@ Nodes set - Nodes set + Набір вузлів @@ -235,7 +235,7 @@ FemGui::TaskDlgFemConstraintForce - + Input error Помилка вводу @@ -261,7 +261,7 @@ Nodes set - Nodes set + Набір вузлів @@ -269,7 +269,7 @@ FEM constraint parameters - FEM constraint parameters + Обмежувальні параметри МСЕ @@ -287,7 +287,7 @@ Selection error - Selection error + Помилка виділення @@ -302,7 +302,7 @@ Only cylindrical faces can be picked - Only cylindrical faces can be picked + Можуть бути обраними лише циліндричні поверхні @@ -331,7 +331,7 @@ Selection error - Selection error + Помилка виділення @@ -347,36 +347,24 @@ FemGui::TaskFemConstraintForce - + Delete Видалити - - Force [N] - Сила [Н] - - - Force [N/mm] - Сила [Н/мм] - - - Force [N/mm²] - Force [N/mm²] - Point load [N] - + Point load [N] Line load [N/mm] - + Line load [N/mm] Area load [N/mm²] - + Area load [N/mm²] @@ -385,7 +373,7 @@ Selection error - Selection error + Помилка виділення @@ -420,7 +408,7 @@ Selection error - Selection error + Помилка виділення @@ -443,7 +431,7 @@ Pulley diameter - Pulley diameter + Діаметр шківу @@ -472,7 +460,7 @@ Mechanical analysis - Mechanical analysis + Механічний аналіз @@ -481,13 +469,23 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix Run Calculix Time: - Time: + Час: @@ -497,27 +495,27 @@ choose... - choose... + обрати... MatWeb database... - MatWeb database... + База даних MatWeb... Young's Modulus: - Young's Modulus: + Модуль Юнга: Pa - Pa + Па Poisson Ratio: - Poisson Ratio: + Коефіцієнт Пуассона: @@ -550,7 +548,7 @@ Select an edge, face or body. Only one body is allowed. - Обрати край, грань або тіло. Можливо обрати лише одне тіло. + Обрати грань, поверхню або тіло. Можливо обрати лише одне тіло. @@ -567,7 +565,7 @@ Ok - Ok + Гаразд @@ -577,7 +575,7 @@ Edit constraint - Edit constraint + Редагувати обмеження @@ -628,13 +626,18 @@ Meshing Meshing + + + Constraint force + + ShowDisplacement Show result - Show result + Показати результат @@ -649,12 +652,12 @@ Max: - Max: + Максимум: Min: - Min: + Мінімум: @@ -664,7 +667,7 @@ Avg: - Avg: + Середнє: @@ -699,7 +702,7 @@ Meshes: - Meshes: + Сітки: @@ -793,7 +796,7 @@ Diameter - Diameter + Діаметр @@ -803,7 +806,7 @@ Center distance - Center distance + Середина відстані @@ -841,7 +844,7 @@ Gear diameter - Gear diameter + Діаметр передачі @@ -851,7 +854,7 @@ Center distance - Center distance + Середина відстані @@ -876,12 +879,12 @@ Force Direction - Force Direction + Напрямок сили Reversed direction - Reversed direction + Зворотній напрямок @@ -958,7 +961,7 @@ Max. Size: - Max. Size: + Макс. розмір: @@ -998,7 +1001,7 @@ UserDefined - UserDefined + Визначений користувачем @@ -1008,7 +1011,7 @@ Nbr. Segs per Edge: - Nbr. Segs per Edge: + Кількість відрізків на ребро: @@ -1018,22 +1021,22 @@ Optimize - Optimize + Оптимізувати Node count: - Node count: + Кількість вузлів: Triangle count: - Triangle count: + Кількість трикутників: Tetraeder count: - Tetraeder count: + Кількість тетраедрів: diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.qm index 4009b7acfc..b971d328cb 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts index d188506073..ba4075a718 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts @@ -235,7 +235,7 @@ FemGui::TaskDlgFemConstraintForce - + Input error 输入错误 @@ -347,36 +347,24 @@ FemGui::TaskFemConstraintForce - + Delete 删除 - - Force [N] - Force [N] - - - Force [N/mm] - Force [N/mm] - - - Force [N/mm²] - Force [N/mm²] - Point load [N] - + Point load [N] Line load [N/mm] - + Line load [N/mm] Area load [N/mm²] - + Area load [N/mm²] @@ -481,6 +469,16 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix Run Calculix @@ -628,6 +626,11 @@ Meshing Meshing + + + Constraint force + + ShowDisplacement diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.qm index c82138b959..dc62602a92 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts index 5f66cfea94..88b72436c9 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts @@ -235,7 +235,7 @@ FemGui::TaskDlgFemConstraintForce - + Input error 輸入錯誤 @@ -347,36 +347,24 @@ FemGui::TaskFemConstraintForce - + Delete 刪除 - - Force [N] - 力[N] - - - Force [N/mm] - 力 [N/mm] - - - Force [N/mm²] - 力 [N/mm²] - Point load [N] - + 點負荷 [N] Line load [N/mm] - + 線負荷 [N/mm] Area load [N/mm²] - + 面負荷 [N/mm²] @@ -481,6 +469,16 @@ + Write Calculix Input File + + + + + Edit Calculix Input File + + + + Run Calculix 執行 Calculix @@ -628,6 +626,11 @@ Meshing 建立網格 + + + Constraint force + + ShowDisplacement diff --git a/src/Mod/Image/Gui/Resources/Image.qrc b/src/Mod/Image/Gui/Resources/Image.qrc index 35b955568c..d6411b353c 100644 --- a/src/Mod/Image/Gui/Resources/Image.qrc +++ b/src/Mod/Image/Gui/Resources/Image.qrc @@ -24,5 +24,6 @@ translations/Image_ro.qm translations/Image_hu.qm translations/Image_pt-PT.qm + translations/Image_sr.qm diff --git a/src/Mod/Image/Gui/Resources/translations/Image_af.qm b/src/Mod/Image/Gui/Resources/translations/Image_af.qm index 84eb810ed7..7f8a094666 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_af.qm and b/src/Mod/Image/Gui/Resources/translations/Image_af.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_cs.qm b/src/Mod/Image/Gui/Resources/translations/Image_cs.qm index 66d04fddbf..12bbbbccb4 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_cs.qm and b/src/Mod/Image/Gui/Resources/translations/Image_cs.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_cs.ts b/src/Mod/Image/Gui/Resources/translations/Image_cs.ts index 23da4ab97c..4eb339dbe7 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_cs.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_cs.ts @@ -16,7 +16,7 @@ Create a planar image in the 3D space - Vytvoří roviný obrázek ve 3D prostoru + Vytvoří rovinný obrázek ve 3D prostoru create a planar image in the 3D space @@ -64,7 +64,7 @@ Image plane - Image plane + Rovina obrázku diff --git a/src/Mod/Image/Gui/Resources/translations/Image_de.qm b/src/Mod/Image/Gui/Resources/translations/Image_de.qm index 761046a015..101d9d9818 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_de.qm and b/src/Mod/Image/Gui/Resources/translations/Image_de.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_de.ts b/src/Mod/Image/Gui/Resources/translations/Image_de.ts index 25f4d41e2c..edba54beff 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_de.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_de.ts @@ -1,6 +1,6 @@ - + CmdCreateImagePlane @@ -16,7 +16,7 @@ Create a planar image in the 3D space - Erzeuge ein planare Grafik im 3D-Raum + Ein planare Grafik im 3D-Raum erzeugen create a planar image in the 3D space @@ -59,37 +59,37 @@ Choose orientation - + Orientierung wählen Image plane - + Bildebene XY-Plane - + XY-Ebene XZ-Plane - + XZ-Ebene YZ-Plane - + YZ-Ebene Reverse direction - + Umgekehrte Richtung Offset: - + Versatz: diff --git a/src/Mod/Image/Gui/Resources/translations/Image_es-ES.qm b/src/Mod/Image/Gui/Resources/translations/Image_es-ES.qm index 0d641e9124..f8d5203187 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_es-ES.qm and b/src/Mod/Image/Gui/Resources/translations/Image_es-ES.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_fi.qm b/src/Mod/Image/Gui/Resources/translations/Image_fi.qm index 150e86fb7f..e6bd1a94d9 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_fi.qm and b/src/Mod/Image/Gui/Resources/translations/Image_fi.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_fi.ts b/src/Mod/Image/Gui/Resources/translations/Image_fi.ts index f2a90dbd74..5c0052672e 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_fi.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_fi.ts @@ -51,7 +51,7 @@ Image pixel format - Kuvan kuvapistemuotoilu + Kuvan pikselimuoto @@ -64,7 +64,7 @@ Image plane - Image plane + Kuvataso diff --git a/src/Mod/Image/Gui/Resources/translations/Image_fr.qm b/src/Mod/Image/Gui/Resources/translations/Image_fr.qm index f2a3540f9d..dbec81bc40 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_fr.qm and b/src/Mod/Image/Gui/Resources/translations/Image_fr.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_hr.qm b/src/Mod/Image/Gui/Resources/translations/Image_hr.qm index 6db8b5620f..449703c2f9 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_hr.qm and b/src/Mod/Image/Gui/Resources/translations/Image_hr.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_hu.qm b/src/Mod/Image/Gui/Resources/translations/Image_hu.qm index 1e203146fb..a0290754c5 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_hu.qm and b/src/Mod/Image/Gui/Resources/translations/Image_hu.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_hu.ts b/src/Mod/Image/Gui/Resources/translations/Image_hu.ts index 45487ec3ac..11017c8252 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_hu.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_hu.ts @@ -64,7 +64,7 @@ Image plane - Image plane + Kép sík diff --git a/src/Mod/Image/Gui/Resources/translations/Image_it.qm b/src/Mod/Image/Gui/Resources/translations/Image_it.qm index e7ea78d1d1..7d3b2ecd33 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_it.qm and b/src/Mod/Image/Gui/Resources/translations/Image_it.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_ja.qm b/src/Mod/Image/Gui/Resources/translations/Image_ja.qm index eb3e8f544f..a2379357b3 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_ja.qm and b/src/Mod/Image/Gui/Resources/translations/Image_ja.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_nl.qm b/src/Mod/Image/Gui/Resources/translations/Image_nl.qm index f4faebefc1..88d77bd11b 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_nl.qm and b/src/Mod/Image/Gui/Resources/translations/Image_nl.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_nl.ts b/src/Mod/Image/Gui/Resources/translations/Image_nl.ts index 53c2a44475..9622470416 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_nl.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_nl.ts @@ -64,7 +64,7 @@ Image plane - Image plane + Beeldvlak diff --git a/src/Mod/Image/Gui/Resources/translations/Image_no.qm b/src/Mod/Image/Gui/Resources/translations/Image_no.qm index e81282b791..520a969ad3 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_no.qm and b/src/Mod/Image/Gui/Resources/translations/Image_no.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_no.ts b/src/Mod/Image/Gui/Resources/translations/Image_no.ts index 0e665f4dbd..0147312a44 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_no.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_no.ts @@ -195,7 +195,7 @@ All files - All files + Alle filer diff --git a/src/Mod/Image/Gui/Resources/translations/Image_pl.qm b/src/Mod/Image/Gui/Resources/translations/Image_pl.qm index 4574a35bb1..c704f03971 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_pl.qm and b/src/Mod/Image/Gui/Resources/translations/Image_pl.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_pl.ts b/src/Mod/Image/Gui/Resources/translations/Image_pl.ts index 89f3cc980e..5333a0a6ca 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_pl.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_pl.ts @@ -64,7 +64,7 @@ Image plane - Image plane + Płaszczyzna obrazu diff --git a/src/Mod/Image/Gui/Resources/translations/Image_pt-BR.qm b/src/Mod/Image/Gui/Resources/translations/Image_pt-BR.qm index 9089a5b7b2..f8496230d6 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_pt-BR.qm and b/src/Mod/Image/Gui/Resources/translations/Image_pt-BR.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_pt-PT.qm b/src/Mod/Image/Gui/Resources/translations/Image_pt-PT.qm index 1635189cfe..d7c00d4a7e 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_pt-PT.qm and b/src/Mod/Image/Gui/Resources/translations/Image_pt-PT.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_pt-PT.ts b/src/Mod/Image/Gui/Resources/translations/Image_pt-PT.ts index c2c5ca4b3a..c412e60270 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_pt-PT.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_pt-PT.ts @@ -64,7 +64,7 @@ Image plane - Image plane + Plano de imagem diff --git a/src/Mod/Image/Gui/Resources/translations/Image_ro.qm b/src/Mod/Image/Gui/Resources/translations/Image_ro.qm index 3797c4889f..b9583331a8 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_ro.qm and b/src/Mod/Image/Gui/Resources/translations/Image_ro.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_ro.ts b/src/Mod/Image/Gui/Resources/translations/Image_ro.ts index 4ceadd8001..559df0861f 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_ro.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_ro.ts @@ -64,7 +64,7 @@ Image plane - Image plane + Imagine plană diff --git a/src/Mod/Image/Gui/Resources/translations/Image_ru.qm b/src/Mod/Image/Gui/Resources/translations/Image_ru.qm index 01f4ddcdf9..7a17cfa837 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_ru.qm and b/src/Mod/Image/Gui/Resources/translations/Image_ru.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_ru.ts b/src/Mod/Image/Gui/Resources/translations/Image_ru.ts index d4620eb938..7a681ad096 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_ru.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_ru.ts @@ -64,7 +64,7 @@ Image plane - Image plane + Плоскость изображения diff --git a/src/Mod/Image/Gui/Resources/translations/Image_sr.qm b/src/Mod/Image/Gui/Resources/translations/Image_sr.qm new file mode 100644 index 0000000000..8f6954c439 Binary files /dev/null and b/src/Mod/Image/Gui/Resources/translations/Image_sr.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_sr.ts b/src/Mod/Image/Gui/Resources/translations/Image_sr.ts new file mode 100644 index 0000000000..b6037ab99d --- /dev/null +++ b/src/Mod/Image/Gui/Resources/translations/Image_sr.ts @@ -0,0 +1,219 @@ + + + + + CmdCreateImagePlane + + + Image + Слика + + + + Create image plane... + Креирање равни слике ... + + + + Create a planar image in the 3D space + Направи раван од слике у 3Д простору + + + create a planar image in the 3D space + Креирање планарне слике у 3Д простору + + + + CmdImageOpen + + + Image + Слика + + + + Open... + Отвори ... + + + + Open image view + Отвори преглед слике + + + + ImageGui::GLImageBox + + + Undefined type of colour space for image viewing + Недефинисани тип боје простора за приказ слике + + + + Image pixel format + Формат пиксела слике + + + + ImageGui::ImageOrientationDialog + + + Choose orientation + Choose orientation + + + + Image plane + Раван од слике + + + + XY-Plane + XY-Plane + + + + XZ-Plane + XZ-Plane + + + + YZ-Plane + YZ-Plane + + + + Reverse direction + Reverse direction + + + + Offset: + Offset: + + + + ImageGui::ImageView + + + &Fit image + &Уклапање слике + + + + Stretch the image to fit the view + Увећај слику за боље уклапање + + + + &1:1 scale + &1:1 мера + + + + Display the image at a 1:1 scale + Приказ слике у мерилу 1:1 + + + &Original color + &Izvorna boja + + + Display the image with its original color(s) + Prikaži sliku s izvonom bojom + + + &Brightened color + &Svjetlina boje + + + Display the image with brightened color(s) + Prikaz slike sa svjetlijom bojom + + + + Standard + Normalno + + + + Ready... + Спреман... + + + + grey + сиве боје + + + + + + + + + + + + + zoom + зумирање + + + + + + + + outside image + изван слике + + + + QObject + + Image viewer + Pregled slike + + + Images (*.png *.xpm *.jpg *.bmp) + Слике (*.png *.xpm *.jpg *.bmp) + + + + + Choose an image file to open + Одаберите сликовну датотеку за отварање + + + + + Images + Слике + + + + + All files + Све датотеке + + + + Error open image + Грешка отварања слике + + + + Could not load the choosen image + Није могуће учитати изабрану слику + + + + Workbench + + + Image + Слика + + + diff --git a/src/Mod/Image/Gui/Resources/translations/Image_sv-SE.qm b/src/Mod/Image/Gui/Resources/translations/Image_sv-SE.qm index ba721ac1a5..cc1d3c36bd 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_sv-SE.qm and b/src/Mod/Image/Gui/Resources/translations/Image_sv-SE.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_uk.qm b/src/Mod/Image/Gui/Resources/translations/Image_uk.qm index e6cc408ecc..357f632eb0 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_uk.qm and b/src/Mod/Image/Gui/Resources/translations/Image_uk.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_uk.ts b/src/Mod/Image/Gui/Resources/translations/Image_uk.ts index 287ffa5d68..26eb9d67eb 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_uk.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_uk.ts @@ -64,7 +64,7 @@ Image plane - Image plane + Площина зображення diff --git a/src/Mod/Image/Gui/Resources/translations/Image_zh-CN.qm b/src/Mod/Image/Gui/Resources/translations/Image_zh-CN.qm index 37f96a0938..7ae1f1c050 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_zh-CN.qm and b/src/Mod/Image/Gui/Resources/translations/Image_zh-CN.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_zh-TW.qm b/src/Mod/Image/Gui/Resources/translations/Image_zh-TW.qm index 7a6753573a..c23c84be12 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_zh-TW.qm and b/src/Mod/Image/Gui/Resources/translations/Image_zh-TW.qm differ diff --git a/src/Mod/Material/StandardMaterial/15CrNi6.FCMat b/src/Mod/Material/StandardMaterial/15CrNi6.FCMat index fce59ed5d1..f6d5b68879 100755 --- a/src/Mod/Material/StandardMaterial/15CrNi6.FCMat +++ b/src/Mod/Material/StandardMaterial/15CrNi6.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=1000 YieldStrength=680 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/17CrNiMo6.FCMat b/src/Mod/Material/StandardMaterial/17CrNiMo6.FCMat index 9b8938e139..e7525c4c90 100755 --- a/src/Mod/Material/StandardMaterial/17CrNiMo6.FCMat +++ b/src/Mod/Material/StandardMaterial/17CrNiMo6.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=1150 YieldStrength=830 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/1C22.FCMat b/src/Mod/Material/StandardMaterial/1C22.FCMat index 551f765176..86c198dcce 100755 --- a/src/Mod/Material/StandardMaterial/1C22.FCMat +++ b/src/Mod/Material/StandardMaterial/1C22.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=400 YieldStrength=230 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/1C35.FCMat b/src/Mod/Material/StandardMaterial/1C35.FCMat index 576ae21eed..68c0e24557 100755 --- a/src/Mod/Material/StandardMaterial/1C35.FCMat +++ b/src/Mod/Material/StandardMaterial/1C35.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=480 YieldStrength=300 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/1C45.FCMat b/src/Mod/Material/StandardMaterial/1C45.FCMat index b6b03cf0c8..39a159d07a 100755 --- a/src/Mod/Material/StandardMaterial/1C45.FCMat +++ b/src/Mod/Material/StandardMaterial/1C45.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=580 YieldStrength=340 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/1C60.FCMat b/src/Mod/Material/StandardMaterial/1C60.FCMat index 7cdf4d72b9..91d390396e 100755 --- a/src/Mod/Material/StandardMaterial/1C60.FCMat +++ b/src/Mod/Material/StandardMaterial/1C60.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=650 YieldStrength=380 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/20NiCrMo2.FCMat b/src/Mod/Material/StandardMaterial/20NiCrMo2.FCMat index 2aa4ca8df2..6e9f87cee7 100755 --- a/src/Mod/Material/StandardMaterial/20NiCrMo2.FCMat +++ b/src/Mod/Material/StandardMaterial/20NiCrMo2.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=900 YieldStrength=630 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/28Mn6.FCMat b/src/Mod/Material/StandardMaterial/28Mn6.FCMat index 8852f335b3..081b58df92 100755 --- a/src/Mod/Material/StandardMaterial/28Mn6.FCMat +++ b/src/Mod/Material/StandardMaterial/28Mn6.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=800 YieldStrength=590 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/2C10.FCMat b/src/Mod/Material/StandardMaterial/2C10.FCMat index 4d7467cec7..ee4d82070f 100755 --- a/src/Mod/Material/StandardMaterial/2C10.FCMat +++ b/src/Mod/Material/StandardMaterial/2C10.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=640 YieldStrength=390 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/30CrNiMo8.FCMat b/src/Mod/Material/StandardMaterial/30CrNiMo8.FCMat index 14d27a3a61..f2ebbb8df7 100755 --- a/src/Mod/Material/StandardMaterial/30CrNiMo8.FCMat +++ b/src/Mod/Material/StandardMaterial/30CrNiMo8.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=1250 YieldStrength=1050 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/34CrNiMo6.FCMat b/src/Mod/Material/StandardMaterial/34CrNiMo6.FCMat index ede705b836..76e72afedb 100755 --- a/src/Mod/Material/StandardMaterial/34CrNiMo6.FCMat +++ b/src/Mod/Material/StandardMaterial/34CrNiMo6.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=1200 YieldStrength=1000 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/36CrNiMo4.FCMat b/src/Mod/Material/StandardMaterial/36CrNiMo4.FCMat index c71551dcae..7525339250 100755 --- a/src/Mod/Material/StandardMaterial/36CrNiMo4.FCMat +++ b/src/Mod/Material/StandardMaterial/36CrNiMo4.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=1100 YieldStrength=900 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/36NiCrMo16.FCMat b/src/Mod/Material/StandardMaterial/36NiCrMo16.FCMat index 7d266cce2e..ce1f5bb070 100755 --- a/src/Mod/Material/StandardMaterial/36NiCrMo16.FCMat +++ b/src/Mod/Material/StandardMaterial/36NiCrMo16.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=1250 YieldStrength=1050 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/3C15.FCMat b/src/Mod/Material/StandardMaterial/3C15.FCMat index 44d3cc6983..660a8c6a1f 100755 --- a/src/Mod/Material/StandardMaterial/3C15.FCMat +++ b/src/Mod/Material/StandardMaterial/3C15.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=740 YieldStrength=440 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/3C22.FCMat b/src/Mod/Material/StandardMaterial/3C22.FCMat index bfa2898036..956dc4e16f 100755 --- a/src/Mod/Material/StandardMaterial/3C22.FCMat +++ b/src/Mod/Material/StandardMaterial/3C22.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=550 YieldStrength=350 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/3C35.FCMat b/src/Mod/Material/StandardMaterial/3C35.FCMat index 869fee8ef1..6314f7497e 100755 --- a/src/Mod/Material/StandardMaterial/3C35.FCMat +++ b/src/Mod/Material/StandardMaterial/3C35.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=630 YieldStrength=430 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/3V45.FCMat b/src/Mod/Material/StandardMaterial/3V45.FCMat index 7acf0945ea..931c0a26e5 100755 --- a/src/Mod/Material/StandardMaterial/3V45.FCMat +++ b/src/Mod/Material/StandardMaterial/3V45.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=700 YieldStrength=500 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/AlMg3F24.FCMat b/src/Mod/Material/StandardMaterial/AlMg3F24.FCMat index 6cfe0239b3..868ca0b10b 100755 --- a/src/Mod/Material/StandardMaterial/AlMg3F24.FCMat +++ b/src/Mod/Material/StandardMaterial/AlMg3F24.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=250 YieldStrength=180 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=70000 +YoungsModulus=70000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=27000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/AlMgSi1F31.FCMat b/src/Mod/Material/StandardMaterial/AlMgSi1F31.FCMat index 0938061558..96e3c10729 100755 --- a/src/Mod/Material/StandardMaterial/AlMgSi1F31.FCMat +++ b/src/Mod/Material/StandardMaterial/AlMgSi1F31.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=310 YieldStrength=260 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=70000 +YoungsModulus=70000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=27000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/AlZn4.5Mg1F35.FCMat b/src/Mod/Material/StandardMaterial/AlZn4.5Mg1F35.FCMat index a3aa0312c4..e00f9f5a80 100755 --- a/src/Mod/Material/StandardMaterial/AlZn4.5Mg1F35.FCMat +++ b/src/Mod/Material/StandardMaterial/AlZn4.5Mg1F35.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=350 YieldStrength=290 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=70000 +YoungsModulus=70000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=27000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/C10.FCMat b/src/Mod/Material/StandardMaterial/C10.FCMat index 148db95e45..dc7673d398 100755 --- a/src/Mod/Material/StandardMaterial/C10.FCMat +++ b/src/Mod/Material/StandardMaterial/C10.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=650 YieldStrength=380 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/C15.FCMat b/src/Mod/Material/StandardMaterial/C15.FCMat index b424c7ea06..1881c58b12 100755 --- a/src/Mod/Material/StandardMaterial/C15.FCMat +++ b/src/Mod/Material/StandardMaterial/C15.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=750 YieldStrength=430 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/C22E.FCMat b/src/Mod/Material/StandardMaterial/C22E.FCMat index b841509dd2..02f015383e 100755 --- a/src/Mod/Material/StandardMaterial/C22E.FCMat +++ b/src/Mod/Material/StandardMaterial/C22E.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=500 YieldStrength=340 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/C25E.FCMat b/src/Mod/Material/StandardMaterial/C25E.FCMat index a633ee0905..d5718adc71 100755 --- a/src/Mod/Material/StandardMaterial/C25E.FCMat +++ b/src/Mod/Material/StandardMaterial/C25E.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=550 YieldStrength=370 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/C30E.FCMat b/src/Mod/Material/StandardMaterial/C30E.FCMat index aef85e31eb..4e1065e951 100755 --- a/src/Mod/Material/StandardMaterial/C30E.FCMat +++ b/src/Mod/Material/StandardMaterial/C30E.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=600 YieldStrength=400 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/C40E.FCMat b/src/Mod/Material/StandardMaterial/C40E.FCMat index 7502046877..616f556ad0 100755 --- a/src/Mod/Material/StandardMaterial/C40E.FCMat +++ b/src/Mod/Material/StandardMaterial/C40E.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=650 YieldStrength=460 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/C50E.FCMat b/src/Mod/Material/StandardMaterial/C50E.FCMat index 823a7fba53..ffdb3e71a0 100755 --- a/src/Mod/Material/StandardMaterial/C50E.FCMat +++ b/src/Mod/Material/StandardMaterial/C50E.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=750 YieldStrength=520 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/C55E.FCMat b/src/Mod/Material/StandardMaterial/C55E.FCMat index 890be3162e..fc8a341fd2 100755 --- a/src/Mod/Material/StandardMaterial/C55E.FCMat +++ b/src/Mod/Material/StandardMaterial/C55E.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=800 YieldStrength=550 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/C60E.FCMat b/src/Mod/Material/StandardMaterial/C60E.FCMat index 916d51250a..73a706d58a 100755 --- a/src/Mod/Material/StandardMaterial/C60E.FCMat +++ b/src/Mod/Material/StandardMaterial/C60E.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=850 YieldStrength=580 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/E295 GC.FCMat b/src/Mod/Material/StandardMaterial/E295 GC.FCMat index d01e344728..f782d01a7e 100755 --- a/src/Mod/Material/StandardMaterial/E295 GC.FCMat +++ b/src/Mod/Material/StandardMaterial/E295 GC.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=590 YieldStrength=420 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/E295.FCMat b/src/Mod/Material/StandardMaterial/E295.FCMat index 5322e324b8..f7a559fc08 100755 --- a/src/Mod/Material/StandardMaterial/E295.FCMat +++ b/src/Mod/Material/StandardMaterial/E295.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=490 YieldStrength=295 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/E335 GC.FCMat b/src/Mod/Material/StandardMaterial/E335 GC.FCMat index c2fc9bf4f2..b15d3a6e67 100755 --- a/src/Mod/Material/StandardMaterial/E335 GC.FCMat +++ b/src/Mod/Material/StandardMaterial/E335 GC.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=690 YieldStrength=490 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/E335.FCMat b/src/Mod/Material/StandardMaterial/E335.FCMat index 6f0328b738..34cfb17190 100755 --- a/src/Mod/Material/StandardMaterial/E335.FCMat +++ b/src/Mod/Material/StandardMaterial/E335.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=590 YieldStrength=335 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/E360 GC.FCMat b/src/Mod/Material/StandardMaterial/E360 GC.FCMat index 7111c15b20..22ca32ddb0 100755 --- a/src/Mod/Material/StandardMaterial/E360 GC.FCMat +++ b/src/Mod/Material/StandardMaterial/E360 GC.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=780 YieldStrength=560 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/E360.FCMat b/src/Mod/Material/StandardMaterial/E360.FCMat index 893bf6fea1..25a637cd43 100755 --- a/src/Mod/Material/StandardMaterial/E360.FCMat +++ b/src/Mod/Material/StandardMaterial/E360.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=690 YieldStrength=360 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/EN-GJL-100.FCMat b/src/Mod/Material/StandardMaterial/EN-GJL-100.FCMat index 19a54b2d7f..d1d4811344 100755 --- a/src/Mod/Material/StandardMaterial/EN-GJL-100.FCMat +++ b/src/Mod/Material/StandardMaterial/EN-GJL-100.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=100 YieldStrength=0 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=88000 +YoungsModulus=88000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=34000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/EN-GJL-150.FCMat b/src/Mod/Material/StandardMaterial/EN-GJL-150.FCMat index 06c7293419..6e1b73a48e 100755 --- a/src/Mod/Material/StandardMaterial/EN-GJL-150.FCMat +++ b/src/Mod/Material/StandardMaterial/EN-GJL-150.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=150 YieldStrength=98 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=95000 +YoungsModulus=95000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=37000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/EN-GJL-200.FCMat b/src/Mod/Material/StandardMaterial/EN-GJL-200.FCMat index 14e45fd3a3..2c64dcfdd7 100755 --- a/src/Mod/Material/StandardMaterial/EN-GJL-200.FCMat +++ b/src/Mod/Material/StandardMaterial/EN-GJL-200.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=200 YieldStrength=130 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=105000 +YoungsModulus=105000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=40000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/EN-GJL-250.FCMat b/src/Mod/Material/StandardMaterial/EN-GJL-250.FCMat index c3fe390126..a377f6d9ef 100755 --- a/src/Mod/Material/StandardMaterial/EN-GJL-250.FCMat +++ b/src/Mod/Material/StandardMaterial/EN-GJL-250.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=250 YieldStrength=165 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=115000 +YoungsModulus=115000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=44000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/EN-GJL-300.FCMat b/src/Mod/Material/StandardMaterial/EN-GJL-300.FCMat index 705f94f690..595ebdcefe 100755 --- a/src/Mod/Material/StandardMaterial/EN-GJL-300.FCMat +++ b/src/Mod/Material/StandardMaterial/EN-GJL-300.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=300 YieldStrength=195 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=125000 +YoungsModulus=125000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=48000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/EN-GJL-350.FCMat b/src/Mod/Material/StandardMaterial/EN-GJL-350.FCMat index 763c9c0929..0005443051 100755 --- a/src/Mod/Material/StandardMaterial/EN-GJL-350.FCMat +++ b/src/Mod/Material/StandardMaterial/EN-GJL-350.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=350 YieldStrength=228 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=135000 +YoungsModulus=135000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=52000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/EN-GJMB-350-10.FCMat b/src/Mod/Material/StandardMaterial/EN-GJMB-350-10.FCMat index 32860b3cf2..4967b7614c 100755 --- a/src/Mod/Material/StandardMaterial/EN-GJMB-350-10.FCMat +++ b/src/Mod/Material/StandardMaterial/EN-GJMB-350-10.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=350 YieldStrength=200 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=175000 +YoungsModulus=175000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=67000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/EN-GJMB-550-4.FCMat b/src/Mod/Material/StandardMaterial/EN-GJMB-550-4.FCMat index f92bbb6758..11e3d0c124 100755 --- a/src/Mod/Material/StandardMaterial/EN-GJMB-550-4.FCMat +++ b/src/Mod/Material/StandardMaterial/EN-GJMB-550-4.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=550 YieldStrength=340 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=175000 +YoungsModulus=175000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=67000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/EN-GJMB-650-2.FCMat b/src/Mod/Material/StandardMaterial/EN-GJMB-650-2.FCMat index e86c6da6f4..f0bf485e7d 100755 --- a/src/Mod/Material/StandardMaterial/EN-GJMB-650-2.FCMat +++ b/src/Mod/Material/StandardMaterial/EN-GJMB-650-2.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=650 YieldStrength=430 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=175000 +YoungsModulus=175000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=67000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/EN-GJMW-350-4.FCMat b/src/Mod/Material/StandardMaterial/EN-GJMW-350-4.FCMat index 6713e01f4e..50c46a8119 100755 --- a/src/Mod/Material/StandardMaterial/EN-GJMW-350-4.FCMat +++ b/src/Mod/Material/StandardMaterial/EN-GJMW-350-4.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=350 YieldStrength=0 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=175000 +YoungsModulus=175000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=67000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/EN-GJMW-360-12.FCMat b/src/Mod/Material/StandardMaterial/EN-GJMW-360-12.FCMat index a82c33548b..4d8b716308 100755 --- a/src/Mod/Material/StandardMaterial/EN-GJMW-360-12.FCMat +++ b/src/Mod/Material/StandardMaterial/EN-GJMW-360-12.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=380 YieldStrength=200 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=175000 +YoungsModulus=175000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=67000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/EN-GJMW-400-5.FCMat b/src/Mod/Material/StandardMaterial/EN-GJMW-400-5.FCMat index 18fa76f18c..eaf26f5026 100755 --- a/src/Mod/Material/StandardMaterial/EN-GJMW-400-5.FCMat +++ b/src/Mod/Material/StandardMaterial/EN-GJMW-400-5.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=400 YieldStrength=220 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=175000 +YoungsModulus=175000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=67000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/EN-GJMW-450-7.FCMat b/src/Mod/Material/StandardMaterial/EN-GJMW-450-7.FCMat index be217803da..57fa2106ca 100755 --- a/src/Mod/Material/StandardMaterial/EN-GJMW-450-7.FCMat +++ b/src/Mod/Material/StandardMaterial/EN-GJMW-450-7.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=450 YieldStrength=260 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=175000 +YoungsModulus=175000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=67000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/EN-GJS-400-15.FCMat b/src/Mod/Material/StandardMaterial/EN-GJS-400-15.FCMat index 26e2d246d3..0671207ae4 100755 --- a/src/Mod/Material/StandardMaterial/EN-GJS-400-15.FCMat +++ b/src/Mod/Material/StandardMaterial/EN-GJS-400-15.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=400 YieldStrength=250 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=167000 +YoungsModulus=167000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=65000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/EN-GJS-500-7.FCMat b/src/Mod/Material/StandardMaterial/EN-GJS-500-7.FCMat index a509d68563..298428e82a 100755 --- a/src/Mod/Material/StandardMaterial/EN-GJS-500-7.FCMat +++ b/src/Mod/Material/StandardMaterial/EN-GJS-500-7.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=500 YieldStrength=320 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=170000 +YoungsModulus=170000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=66000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/EN-GJS-600-3.FCMat b/src/Mod/Material/StandardMaterial/EN-GJS-600-3.FCMat index 9026721bf0..390de6e3c5 100755 --- a/src/Mod/Material/StandardMaterial/EN-GJS-600-3.FCMat +++ b/src/Mod/Material/StandardMaterial/EN-GJS-600-3.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=600 YieldStrength=370 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=177000 +YoungsModulus=177000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=67000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/EN-GJS-700-2.FCMat b/src/Mod/Material/StandardMaterial/EN-GJS-700-2.FCMat index 675c190380..7635b8192f 100755 --- a/src/Mod/Material/StandardMaterial/EN-GJS-700-2.FCMat +++ b/src/Mod/Material/StandardMaterial/EN-GJS-700-2.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=700 YieldStrength=420 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=180000 +YoungsModulus=180000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=67000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/EN-GJS-800-1.FCMat b/src/Mod/Material/StandardMaterial/EN-GJS-800-1.FCMat index ff2b667623..3d5b7d16bf 100755 --- a/src/Mod/Material/StandardMaterial/EN-GJS-800-1.FCMat +++ b/src/Mod/Material/StandardMaterial/EN-GJS-800-1.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=800 YieldStrength=480 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=180000 +YoungsModulus=180000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=67000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/G16Mn5.FCMat b/src/Mod/Material/StandardMaterial/G16Mn5.FCMat index b5410aa8e4..a84ceaa356 100755 --- a/src/Mod/Material/StandardMaterial/G16Mn5.FCMat +++ b/src/Mod/Material/StandardMaterial/G16Mn5.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=430 YieldStrength=260 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/G200.FCMat b/src/Mod/Material/StandardMaterial/G200.FCMat index 26a9e84a87..15cd121c6c 100755 --- a/src/Mod/Material/StandardMaterial/G200.FCMat +++ b/src/Mod/Material/StandardMaterial/G200.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=380 YieldStrength=200 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/G20Mn5.FCMat b/src/Mod/Material/StandardMaterial/G20Mn5.FCMat index 3f703a6f79..eb039c5371 100755 --- a/src/Mod/Material/StandardMaterial/G20Mn5.FCMat +++ b/src/Mod/Material/StandardMaterial/G20Mn5.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=500 YieldStrength=360 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/G230.FCMat b/src/Mod/Material/StandardMaterial/G230.FCMat index 9bd203de9a..abb15b5031 100755 --- a/src/Mod/Material/StandardMaterial/G230.FCMat +++ b/src/Mod/Material/StandardMaterial/G230.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=450 YieldStrength=230 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/G260.FCMat b/src/Mod/Material/StandardMaterial/G260.FCMat index 074f083c73..4de3fb7295 100755 --- a/src/Mod/Material/StandardMaterial/G260.FCMat +++ b/src/Mod/Material/StandardMaterial/G260.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=520 YieldStrength=260 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/G300.FCMat b/src/Mod/Material/StandardMaterial/G300.FCMat index 77e2e2dc3c..cd7927c3c8 100755 --- a/src/Mod/Material/StandardMaterial/G300.FCMat +++ b/src/Mod/Material/StandardMaterial/G300.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=600 YieldStrength=300 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/G30Mn5.FCMat b/src/Mod/Material/StandardMaterial/G30Mn5.FCMat index 03a140c0fc..2f56130fc5 100755 --- a/src/Mod/Material/StandardMaterial/G30Mn5.FCMat +++ b/src/Mod/Material/StandardMaterial/G30Mn5.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=520 YieldStrength=400 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/S185.FCMat b/src/Mod/Material/StandardMaterial/S185.FCMat index c662a7f3dc..62e5d2b02f 100755 --- a/src/Mod/Material/StandardMaterial/S185.FCMat +++ b/src/Mod/Material/StandardMaterial/S185.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=310 YieldStrength=190 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/S235JO.FCMat b/src/Mod/Material/StandardMaterial/S235JO.FCMat index 9c71f02411..ec76950147 100755 --- a/src/Mod/Material/StandardMaterial/S235JO.FCMat +++ b/src/Mod/Material/StandardMaterial/S235JO.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=360 YieldStrength=235 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/S235JR.FCMat b/src/Mod/Material/StandardMaterial/S235JR.FCMat index 84736a451a..6d623695cb 100755 --- a/src/Mod/Material/StandardMaterial/S235JR.FCMat +++ b/src/Mod/Material/StandardMaterial/S235JR.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=360 YieldStrength=235 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/S235JRG1.FCMat b/src/Mod/Material/StandardMaterial/S235JRG1.FCMat index 7a0dab8a28..e0ea50c9f6 100755 --- a/src/Mod/Material/StandardMaterial/S235JRG1.FCMat +++ b/src/Mod/Material/StandardMaterial/S235JRG1.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=360 YieldStrength=235 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/S260NC.FCMat b/src/Mod/Material/StandardMaterial/S260NC.FCMat index 6bc80fd953..899d61eaec 100755 --- a/src/Mod/Material/StandardMaterial/S260NC.FCMat +++ b/src/Mod/Material/StandardMaterial/S260NC.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=350 YieldStrength=280 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/S275JO.FCMat b/src/Mod/Material/StandardMaterial/S275JO.FCMat index 4a9b5d84bc..3d9316aba1 100755 --- a/src/Mod/Material/StandardMaterial/S275JO.FCMat +++ b/src/Mod/Material/StandardMaterial/S275JO.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=430 YieldStrength=275 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/S275JR.FCMat b/src/Mod/Material/StandardMaterial/S275JR.FCMat index e439e52539..e5e7b08581 100755 --- a/src/Mod/Material/StandardMaterial/S275JR.FCMat +++ b/src/Mod/Material/StandardMaterial/S275JR.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=430 YieldStrength=275 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/S275N.FCMat b/src/Mod/Material/StandardMaterial/S275N.FCMat index b24851e564..cfb0494d30 100755 --- a/src/Mod/Material/StandardMaterial/S275N.FCMat +++ b/src/Mod/Material/StandardMaterial/S275N.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=370 YieldStrength=275 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/S335JO.FCMat b/src/Mod/Material/StandardMaterial/S335JO.FCMat index fedea0add9..58d37724e3 100755 --- a/src/Mod/Material/StandardMaterial/S335JO.FCMat +++ b/src/Mod/Material/StandardMaterial/S335JO.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=510 YieldStrength=355 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/S335JR.FCMat b/src/Mod/Material/StandardMaterial/S335JR.FCMat index 3f99628609..bfa101d67c 100755 --- a/src/Mod/Material/StandardMaterial/S335JR.FCMat +++ b/src/Mod/Material/StandardMaterial/S335JR.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=510 YieldStrength=355 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/S335N.FCMat b/src/Mod/Material/StandardMaterial/S335N.FCMat index ba83e8a8c1..dceeacdc4d 100755 --- a/src/Mod/Material/StandardMaterial/S335N.FCMat +++ b/src/Mod/Material/StandardMaterial/S335N.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=470 YieldStrength=355 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/S340MC.FCMat b/src/Mod/Material/StandardMaterial/S340MC.FCMat index 52602ffd7a..7a709010cf 100755 --- a/src/Mod/Material/StandardMaterial/S340MC.FCMat +++ b/src/Mod/Material/StandardMaterial/S340MC.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=480 YieldStrength=340 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/S355J2G3.FCMat b/src/Mod/Material/StandardMaterial/S355J2G3.FCMat index 83f95faa95..28385e2b62 100755 --- a/src/Mod/Material/StandardMaterial/S355J2G3.FCMat +++ b/src/Mod/Material/StandardMaterial/S355J2G3.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=510 YieldStrength=355 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/S380MC.FCMat b/src/Mod/Material/StandardMaterial/S380MC.FCMat index fe85a26065..ab5384bfcc 100755 --- a/src/Mod/Material/StandardMaterial/S380MC.FCMat +++ b/src/Mod/Material/StandardMaterial/S380MC.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=520 YieldStrength=380 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/S420MC.FCMat b/src/Mod/Material/StandardMaterial/S420MC.FCMat index 465442fd2b..a14ed260c6 100755 --- a/src/Mod/Material/StandardMaterial/S420MC.FCMat +++ b/src/Mod/Material/StandardMaterial/S420MC.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=550 YieldStrength=420 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/S420N.FCMat b/src/Mod/Material/StandardMaterial/S420N.FCMat index f503f3ee64..51e7e0d34f 100755 --- a/src/Mod/Material/StandardMaterial/S420N.FCMat +++ b/src/Mod/Material/StandardMaterial/S420N.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=520 YieldStrength=420 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/S460MC.FCMat b/src/Mod/Material/StandardMaterial/S460MC.FCMat index 801ac42989..442a13e1c3 100755 --- a/src/Mod/Material/StandardMaterial/S460MC.FCMat +++ b/src/Mod/Material/StandardMaterial/S460MC.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=590 YieldStrength=460 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/S460N.FCMat b/src/Mod/Material/StandardMaterial/S460N.FCMat index d311d0df2e..cb4982f615 100755 --- a/src/Mod/Material/StandardMaterial/S460N.FCMat +++ b/src/Mod/Material/StandardMaterial/S460N.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=550 YieldStrength=460 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/S500MC.FCMat b/src/Mod/Material/StandardMaterial/S500MC.FCMat index eaabdd07fc..b0fa26ecbc 100755 --- a/src/Mod/Material/StandardMaterial/S500MC.FCMat +++ b/src/Mod/Material/StandardMaterial/S500MC.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=620 YieldStrength=500 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/S550MC.FCMat b/src/Mod/Material/StandardMaterial/S550MC.FCMat index 8a74b9d50e..6627ec6599 100755 --- a/src/Mod/Material/StandardMaterial/S550MC.FCMat +++ b/src/Mod/Material/StandardMaterial/S550MC.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=680 YieldStrength=550 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/S690MC.FCMat b/src/Mod/Material/StandardMaterial/S690MC.FCMat index 231885a0a9..60ae4f48e2 100755 --- a/src/Mod/Material/StandardMaterial/S690MC.FCMat +++ b/src/Mod/Material/StandardMaterial/S690MC.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=790 YieldStrength=690 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/St-37-2K.FCMat b/src/Mod/Material/StandardMaterial/St-37-2K.FCMat index de562718f9..642ae72663 100755 --- a/src/Mod/Material/StandardMaterial/St-37-2K.FCMat +++ b/src/Mod/Material/StandardMaterial/St-37-2K.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=460 YieldStrength=320 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/St-E-255.FCMat b/src/Mod/Material/StandardMaterial/St-E-255.FCMat index 3cb215ebea..a97a7340ee 100755 --- a/src/Mod/Material/StandardMaterial/St-E-255.FCMat +++ b/src/Mod/Material/StandardMaterial/St-E-255.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=360 YieldStrength=260 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/St-E-315.FCMat b/src/Mod/Material/StandardMaterial/St-E-315.FCMat index 2a0d4a3a12..333e149f7a 100755 --- a/src/Mod/Material/StandardMaterial/St-E-315.FCMat +++ b/src/Mod/Material/StandardMaterial/St-E-315.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=440 YieldStrength=320 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/St-E-380.FCMat b/src/Mod/Material/StandardMaterial/St-E-380.FCMat index 82a21272c9..c966330047 100755 --- a/src/Mod/Material/StandardMaterial/St-E-380.FCMat +++ b/src/Mod/Material/StandardMaterial/St-E-380.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=500 YieldStrength=380 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/St-E-460.FCMat b/src/Mod/Material/StandardMaterial/St-E-460.FCMat index cb58e0d3d4..ad407bf3ae 100755 --- a/src/Mod/Material/StandardMaterial/St-E-460.FCMat +++ b/src/Mod/Material/StandardMaterial/St-E-460.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=560 YieldStrength=460 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/St-E-500.FCMat b/src/Mod/Material/StandardMaterial/St-E-500.FCMat index 85f755c93f..19deefe208 100755 --- a/src/Mod/Material/StandardMaterial/St-E-500.FCMat +++ b/src/Mod/Material/StandardMaterial/St-E-500.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=610 YieldStrength=500 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=210000 +YoungsModulus=210000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/X2CrNiMoN17-13-3.FCMat b/src/Mod/Material/StandardMaterial/X2CrNiMoN17-13-3.FCMat index 31703e186c..9cedf65a22 100755 --- a/src/Mod/Material/StandardMaterial/X2CrNiMoN17-13-3.FCMat +++ b/src/Mod/Material/StandardMaterial/X2CrNiMoN17-13-3.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=580 YieldStrength=295 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=200000 +YoungsModulus=200000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/X2CrNiN24-4.FCMat b/src/Mod/Material/StandardMaterial/X2CrNiN24-4.FCMat index 7de4bd9fbb..6896c0bcea 100755 --- a/src/Mod/Material/StandardMaterial/X2CrNiN24-4.FCMat +++ b/src/Mod/Material/StandardMaterial/X2CrNiN24-4.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=600 YieldStrength=400 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=200000 +YoungsModulus=200000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/X39CrMo17-1.FCMat b/src/Mod/Material/StandardMaterial/X39CrMo17-1.FCMat index 7ad4a736e8..bb6846ba37 100755 --- a/src/Mod/Material/StandardMaterial/X39CrMo17-1.FCMat +++ b/src/Mod/Material/StandardMaterial/X39CrMo17-1.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=750 YieldStrength=500 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=213000 +YoungsModulus=213000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/X3CrNiMo13-14.FCMat b/src/Mod/Material/StandardMaterial/X3CrNiMo13-14.FCMat index 8742be2e63..6c296ab949 100755 --- a/src/Mod/Material/StandardMaterial/X3CrNiMo13-14.FCMat +++ b/src/Mod/Material/StandardMaterial/X3CrNiMo13-14.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=900 YieldStrength=800 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=216000 +YoungsModulus=216000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/X5CrNi18-10.FCMat b/src/Mod/Material/StandardMaterial/X5CrNi18-10.FCMat index fa2c447967..bfb539a150 100755 --- a/src/Mod/Material/StandardMaterial/X5CrNi18-10.FCMat +++ b/src/Mod/Material/StandardMaterial/X5CrNi18-10.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=520 YieldStrength=210 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=200000 +YoungsModulus=200000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/X5CrNiMo17-12-2.FCMat b/src/Mod/Material/StandardMaterial/X5CrNiMo17-12-2.FCMat index 45eb9c44a5..ef050586b4 100755 --- a/src/Mod/Material/StandardMaterial/X5CrNiMo17-12-2.FCMat +++ b/src/Mod/Material/StandardMaterial/X5CrNiMo17-12-2.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=520 YieldStrength=220 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=180000 +YoungsModulus=180000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=68000 Elasticity= diff --git a/src/Mod/Material/StandardMaterial/X6CrNiTi18-10.FCMat b/src/Mod/Material/StandardMaterial/X6CrNiTi18-10.FCMat index d0ce4baaff..a9df205790 100755 --- a/src/Mod/Material/StandardMaterial/X6CrNiTi18-10.FCMat +++ b/src/Mod/Material/StandardMaterial/X6CrNiTi18-10.FCMat @@ -26,7 +26,7 @@ UltimateTensileStrength=500 YieldStrength=200 CompressiveStrength= ; Youngs Modulus - E-Modul - N/mm² -YoungsModulus=200000 +YoungsModulus=200000 MPa ; ModulusOfShare - G-Modul - N/mm² ModulusOfShare=81000 Elasticity= diff --git a/src/Mod/Mesh/Gui/Resources/Mesh.qrc b/src/Mod/Mesh/Gui/Resources/Mesh.qrc index 1e05e521f5..a18b7409f1 100644 --- a/src/Mod/Mesh/Gui/Resources/Mesh.qrc +++ b/src/Mod/Mesh/Gui/Resources/Mesh.qrc @@ -42,5 +42,6 @@ translations/Mesh_ro.qm translations/Mesh_hu.qm translations/Mesh_pt-PT.qm + translations/Mesh_sr.qm diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_af.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_af.qm index 762f24f3ec..78364a909a 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_af.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_af.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_af.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_af.ts index be59c5f2d8..3489f8d2bc 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_af.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_af.ts @@ -1282,11 +1282,11 @@ Maks=<%4,%5,%6> All Mesh Files (*.stl *.ast *.bms *.obj *.off *.ply) - X3D Extensible 3D(*.x3d) - X3D Extensible 3D(*.x3d) + X3D Extensible 3D (*.x3d) + X3D Extensible 3D (*.x3d) - X3D Extensible 3D (*.x3d) + Display components diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.qm index b2daabdc34..caa3c69a25 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts index cec2dfd1e7..0fa0a23303 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_cs.ts @@ -420,11 +420,11 @@ Segment by tool mesh - Segment by tool mesh + Segmentovat pomocí sítě Creates a segment from a given tool mesh - Creates a segment from a given tool mesh + Vytvoří segment pomocí dané sítě @@ -450,11 +450,11 @@ Trim mesh with a plane - Trim mesh with a plane + Oříznout síť pomocí roviny Trims a mesh with a plane - Trims a mesh with a plane + Ořízne síť pomocí roviny @@ -554,7 +554,7 @@ Face indices - Face indices + Indexy plochy Number of faces: @@ -590,7 +590,7 @@ Folds on surface - Folds on surface + Záhyby na povrchu @@ -601,19 +601,19 @@ Invalid neighbour indices - Invalid neighbour indices + Neplatné sousední indexy Invalid face indices - Invalid face indices + Neplatné indexy povrchů Invalid point indices - Invalid point indices + Neplatné indexy bodů Multiple point indices - Multiple point indices + Indexy vícenásobných bodů Non-manifolds @@ -645,15 +645,15 @@ No invalid indices - No invalid indices + Žádné neplatné indexy No degenerations - No degenerations + Žádná degenerace %1 degenerated faces - %1 degenerated faces + %1 degenerovaných ploch No duplicated faces @@ -681,7 +681,7 @@ Degenerations - Degenerations + Degenerace Duplicated faces @@ -706,8 +706,8 @@ Check failed due to folds on the surface. Please run the command to repair folds first - Check failed due to folds on the surface. -Please run the command to repair folds first + Kontrola selhala kvůli záhybům na povrchu. +Prosím spusťte nejdřív příkaz pro opravu záhybů No folds on surface @@ -794,7 +794,7 @@ Please run the command to repair folds first Sampling: - Sampling: + Vzorkování: Edge length: @@ -832,7 +832,7 @@ Please run the command to repair folds first Backface color - Backface color + Barva zadní stěny Smoothing @@ -840,19 +840,19 @@ Please run the command to repair folds first <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">This is the smallest angle between two faces where normals get calculated to do flat shading.</p><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">If the angle between the normals of two neighbouring faces is less than the crease angle, the faces will be smoothshaded around their common edge.</p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">This is the smallest angle between two faces where normals get calculated to do flat shading.</p><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">If the angle between the normals of two neighbouring faces is less than the crease angle, the faces will be smoothshaded around their common edge.</p></body></html> + <html><head><meta name="qrichtext" content="1" /></head> <body style="white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"> <p style="margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px;-qt-block-indent:0; text-indent:0px; font-size:8pt;"> Toto je nejmenší úhel mezi dvěma plochamy, jejichž normály jsou vypočtené pro rovinné stínování.</p><p style="margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px;-qt-block-indent:0; text-indent:0px; font-size:8pt;"> Je-li úhel mezi normálami dvou sousedních ploch menší než úhel vrásky, plochy budou vyhlazeny podle jejich běžných hran</p></body></html> Crease angle - Vytvořit úhel + Úhel vrásky <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Flat shading/Phong shading</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Defines the appearance of surfaces.</p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">With flat shading the surface normals are not defined per vertex that leads to a unreal appearance for curved surfaces while using Phong shading leads to a smoother appearance. </p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">If this option is set Phong shading is used, if it is unset flat shading is used.</p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Flat shading/Phong shading</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Defines the appearance of surfaces.</p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">With flat shading the surface normals are not defined per vertex that leads to a unreal appearance for curved surfaces while using Phong shading leads to a smoother appearance. </p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">If this option is set Phong shading is used, if it is unset flat shading is used.</p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Rovinné stínování/Phongovo stínování</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Definuje vzhled povrchů.</p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Při rovinném stínováním nejsou normály povrchů definovány pomocí vrcholů, což vede k nereálnému vzhledu zakřivených povrchů. Naproti tomu Phongovo stínování dává hladší vzhled. </p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Je-li nastavena tato možnost, pak je použito Phongovo stínování. V opačném případě je použito rovinné stínování.</p></body></html> Define normal per vertex - Define normal per vertex + Definovat normálu podle vrcholu ° @@ -864,7 +864,7 @@ Please run the command to repair folds first Default appearance for new meshes - Default appearance for new meshes + Výchozí vzhled pro nové sítě Default line color @@ -919,11 +919,11 @@ Please run the command to repair folds first Mu: - Mu: + μ: Only selection - Only selection + Pouze výběr @@ -1082,11 +1082,11 @@ Please run the command to repair folds first Use a brush tool to select the area - Use a brush tool to select the area + Použít nástroj štětec pro výběr oblasti Clears completely the selected area - Clears completely the selected area + Zcela vymaže vybranou oblast @@ -1104,11 +1104,11 @@ Please run the command to repair folds first Mesh_TrimByPlane Select plane - Select plane + Vyberte rovinu Please select a plane at which you trim the mesh. - Please select a plane at which you trim the mesh. + Prosím vyberte rovinu, kterou ořezáváte síť. @@ -1119,13 +1119,13 @@ Please run the command to repair folds first Unknwon error occured while running OpenSCAD. - Unknwon error occured while running OpenSCAD. + Během chodu OpenSCADu se objevila neznámá chyba. OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. - OpenSCAD cannot be found on your system. -Please visit http://www.openscad.org/index.html to install it. + OpenSCAD nelze najít ve Vašem systému. +Prosím navštivte http://www.openscad.org/index.html a nainstalujte ho. @@ -1282,11 +1282,11 @@ Max = <%4,%5,%6> Všechny soubory sítí (*stl *.ast *.bms *.obj *.off *.ply) - X3D Extensible 3D(*.x3d) - X3D Extensible 3D(*.x3d) + X3D Extensible 3D (*.x3d) + X3D Extensible 3D (*.x3d) - X3D Extensible 3D (*.x3d) + Display components diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.qm index fc4b2515ce..7462e1317f 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts index a8e2053df0..6a6625240d 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_de.ts @@ -1,6 +1,6 @@ - + CmdMeshAddFacet @@ -229,11 +229,11 @@ Create mesh from shape... - + Netz aus Form erstellen... Tessellate shape - + Form tessellieren @@ -345,11 +345,11 @@ Trim mesh - Netz trimmen + Netz beschneiden Trims a mesh with a picked polygon - Ein Netz mit einem gewählten Polygon trimmen + Ein Netz mit einem gewählten Polygon beschneiden @@ -450,11 +450,11 @@ Trim mesh with a plane - + Netz mit Ebene zuschneiden Trims a mesh with a plane - + Schneidet ein Netz mit einer Ebene zu @@ -923,7 +923,7 @@ Bitte starten Sie vorher den Befehl zum Reparieren von Falten Only selection - + Nur Auswahl @@ -1062,11 +1062,11 @@ Bitte starten Sie vorher den Befehl zum Reparieren von Falten MeshGui::Selection Selection - + Auswahl Add - + Hinzufügen Clear @@ -1082,11 +1082,11 @@ Bitte starten Sie vorher den Befehl zum Reparieren von Falten Use a brush tool to select the area - + Verwenden Sie einen Pinsel, um den Bereich auszuwählen Clears completely the selected area - + Löscht den ausgewählten Bereich vollständig @@ -1104,27 +1104,28 @@ Bitte starten Sie vorher den Befehl zum Reparieren von Falten Mesh_TrimByPlane Select plane - + Ebene auswählen Please select a plane at which you trim the mesh. - + Bitte wählen Sie eine Ebene, mit welcher Sie das Netz zuschneiden. Mesh_Union OpenSCAD - + OpenSCAD Unknwon error occured while running OpenSCAD. - + Während der Ausführung von OpenSCAD ist ein unbekannter Fehler aufgetreten. OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. - + OpenSCAD kann auf Ihrem System nicht gefunden werden. +Bitte besuchen Sie http://www.openscad.org/index.html, um es zu installieren. @@ -1282,6 +1283,10 @@ Max=<%4,%5,%6> X3D Extensible 3D (*.x3d) + X3D Erweiterbares 3D (*.x3d) + + + Display components diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.qm index 7b9fbb7fa3..28456cca35 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.ts index 2052a0b5c5..e7c984ed86 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_es-ES.ts @@ -1278,11 +1278,11 @@ Max=<%4,%5,%6> Todos los archivos de malla (*.stl *.ast *.bms *.obj *.off * .ply) - X3D Extensible 3D(*.x3d) - 3D(*.x3d) Extensible X3D + X3D Extensible 3D (*.x3d) + X3D Extensible 3D (*.x3d) - X3D Extensible 3D (*.x3d) + Display components diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.qm index 88fc5409e9..8e3a7f1c10 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.ts index 934c9204e6..99ed9c0515 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fi.ts @@ -13,7 +13,7 @@ Add triangle manually to a mesh - Lisää uusi kolmio käsin verkkopintaan + Lisää kolmio käsivaraisesti verkkopintaan @@ -24,11 +24,11 @@ Boundings info... - Rajaamistiedot... + Rajoituksista tietoa... Shows the boundings of the selected mesh - Näytä valitun verkon rajat + Näytä valitun verkkopinnan rajat @@ -50,7 +50,7 @@ CmdMeshDemolding Interactive demolding direction - Interaktiivinen muodonmuokkauksen suunta + Interaktiivinen muotista irroituksen suunta Mesh @@ -91,11 +91,11 @@ Check solid mesh - Tarkasta kiinteä verkko + Tarkasta kiinteä verkkopinta Checks whether the mesh is a solid - Takastaa onko verkko ehyt + Tarkastaa onko verkkopinta kiinteä @@ -106,7 +106,7 @@ Opens a dialog to analyze and repair a mesh - Avaa valintaikkunan jossa voit anlysoida ja korjata verkkopinnan + Avaa valintaikkunan jossa voit analysoida ja korjata verkkopinnan Evaluate && Repair mesh... @@ -158,7 +158,7 @@ Exports a mesh to file - Vie verkkopinan tiedot tiedostoon + Vie verkkopinnan tiedot tiedostoon @@ -169,7 +169,7 @@ Close hole - Tiivistä reikä + Sulje reikä Close holes interactively @@ -188,7 +188,7 @@ Fill holes of the mesh - Täytä verkon reiät + Täytä verkkopinnan reiät @@ -203,7 +203,7 @@ Flips the normals of the mesh - Käännä verkkopinan normaalit + Käännä verkkopinnan normaalit @@ -229,11 +229,11 @@ Create mesh from shape... - Luo verkko muodosta... + Luo verkkotaso muodosta... Tessellate shape - Geometrian pilkottu muoto + Jaa muoto ruutuihin @@ -285,11 +285,11 @@ Cut mesh - Leikkaa verkkopintaa + Leikkaa verkkopinta Cuts a mesh with a picked polygon - Leikkaa verkkopintaa valitulla monikulmiolla + Leikkaa verkkopinta valitulla monikulmiolla @@ -319,7 +319,7 @@ Select an area of the mesh - Valitse verkkopinnan alueen + Valitse verkkopinnan alue @@ -364,7 +364,7 @@ Mark a component to remove it from the mesh - Merkitse osat jotka poistetaan verkkopinnasta + Merkitse osa, joka poistetaan verkkopinnasta @@ -450,11 +450,11 @@ Trim mesh with a plane - Trim mesh with a plane + Leikkaa vekkopintaan tasolla Trims a mesh with a plane - Trims a mesh with a plane + Leikkaa verkkopintaan tasolla @@ -518,7 +518,7 @@ Mesh information - Verkon tiedot + Verkkopinnan tiedot No information @@ -530,7 +530,7 @@ Number of edges: - Reunojen määrät: + Reunojen määrä: Refresh @@ -586,7 +586,7 @@ Evaluate & Repair Mesh - Arvioida & korjata verkkopinta + Arvioi & korjaa verkkopinta Folds on surface @@ -923,7 +923,7 @@ Aja ensin komento jolla taitteet poistetaan Only selection - Only selection + Ainoa valinta @@ -1082,11 +1082,11 @@ Aja ensin komento jolla taitteet poistetaan Use a brush tool to select the area - Use a brush tool to select the area + Käytä sivellintyökalua valitaksesi alueen Clears completely the selected area - Clears completely the selected area + Tyhjentää kokonaan valitun alueen @@ -1104,35 +1104,35 @@ Aja ensin komento jolla taitteet poistetaan Mesh_TrimByPlane Select plane - Select plane + Valitse taso Please select a plane at which you trim the mesh. - Please select a plane at which you trim the mesh. + Valitse taso, jolla leikkaat verkkopinnan. Mesh_Union OpenSCAD - OpenSCAD + openSCAD Unknwon error occured while running OpenSCAD. - Unknwon error occured while running OpenSCAD. + Tuntematon virhe ilmeni OpenSCAD:n käytössä. OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. - OpenSCAD cannot be found on your system. -Please visit http://www.openscad.org/index.html to install it. + OpenSCAD ei löydy järjestelmästäsi. Käy http://www.openscad.org/index.html +osoittweessa asentaaksesi ohjelman. QDockWidget Evaluate & Repair Mesh - Arvioida & korjata verkkopinta + Arvioi & korjaa verkkopinta @@ -1282,11 +1282,11 @@ Suurin=<%4,%5,%6> Kaikki verkkopintatiedostot (*.stl *.ast *.bms *.obj *.off *.ply) - X3D Extensible 3D(*.x3d) - X3D Extensible 3D(*.x3d) + X3D Extensible 3D (*.x3d) + X3D laajennettava 3D(*.x3d) - X3D Extensible 3D (*.x3d) + Display components diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.qm index 8da2e68640..400639aea8 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts index 21a5a103ed..cb1fd14e09 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_fr.ts @@ -1281,11 +1281,11 @@ Max=<%4,%5,%6> Tous les fichiers de maillage (*.stl *.ast *.bms *.obj *.off *.ply) - X3D Extensible 3D(*.x3d) - X3D Extensible 3D (*.x3d) + X3D Extensible 3D (*.x3d) + X3D Extensible 3D (*.x3d) - X3D Extensible 3D (*.x3d) + Display components diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.qm index 9418f6a815..00017475d0 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.ts index 3f4986d932..7b145cb2ab 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hr.ts @@ -1282,11 +1282,11 @@ Max=<%4,%5,%6> Sve MESH datoteke (*.stl *.ast *.bms *.obj *.off *.ply) - X3D Extensible 3D(*.x3d) - X3D Extensible 3D(*.x3d) + X3D Extensible 3D (*.x3d) + X3D Extensible 3D (*.x3d) - X3D Extensible 3D (*.x3d) + Display components diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.qm index 80aba31611..9de35d51a8 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.ts index 4a57ccfd18..aef2711e21 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_hu.ts @@ -1282,11 +1282,11 @@ Max=<%4,%5,%6> Minden háló fájl (*.stl *.ast *.bms *.obj *.off * .ply) - X3D Extensible 3D(*.x3d) - X3D Extensible 3D(*.x3d) + X3D Extensible 3D (*.x3d) + X3D Extensible 3D (*.x3d) - X3D Extensible 3D (*.x3d) + Display components diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.qm index 6ce9fc48f2..3a9cf7498a 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.ts index c91238da78..b192db9f56 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_it.ts @@ -1280,11 +1280,11 @@ Max=<%4,%5,%6> Tutti i file Mesh (*.stl *.ast *.bms *.obj *.off *.ply) - X3D Extensible 3D(*.x3d) - X3D estensibile 3D(*.x3d) + X3D Extensible 3D (*.x3d) + X3D Espandibile 3D (*.x3d) - X3D Extensible 3D (*.x3d) + Display components diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.qm index c52aafba51..255f81f4b6 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.ts index 92e3554433..36a05074f2 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ja.ts @@ -233,7 +233,7 @@ Tessellate shape - シェイプを細分化します。 + シェイプをテッセレーションします。 @@ -450,11 +450,11 @@ Trim mesh with a plane - Trim mesh with a plane + 平面上のメッシュをトリム Trims a mesh with a plane - Trims a mesh with a plane + 平面上のメッシュを1つトリム @@ -923,7 +923,7 @@ Please run the command to repair folds first Only selection - Only selection + 選択のみ @@ -1082,11 +1082,11 @@ Please run the command to repair folds first Use a brush tool to select the area - Use a brush tool to select the area + ブラシツールを使用して領域を選択 Clears completely the selected area - Clears completely the selected area + 選択した領域を完全にクリア @@ -1104,11 +1104,11 @@ Please run the command to repair folds first Mesh_TrimByPlane Select plane - Select plane + 平面を選択 Please select a plane at which you trim the mesh. - Please select a plane at which you trim the mesh. + メッシュのトリムを行う平面を選択してください。 @@ -1281,11 +1281,11 @@ Max=<%4,%5,%6> すべてのメッシュファイル (*.stl *.ast *.bms *.obj *.off *.ply） - X3D Extensible 3D(*.x3d) - X3D Extensible 3D(*.x3d) + X3D Extensible 3D (*.x3d) + X3D Extensible 3D(*.x3d) - X3D Extensible 3D (*.x3d) + Display components diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.qm index de61378c62..3fdf730d54 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts index fbce3e7771..84b2c97d54 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts @@ -345,7 +345,7 @@ Trim mesh - Trim mesh + Gaas bijsnijden Trims a mesh with a picked polygon @@ -1282,11 +1282,11 @@ Max=<%4,%5,%6> Alle gaasbestanden (*.stl *.ast *.bms *.obj *.off *.ply) - X3D Extensible 3D(*.x3d) - X3D Extensible 3D(*.x3d) + X3D Extensible 3D (*.x3d) + X3D Extensible 3D (*.x3d) - X3D Extensible 3D (*.x3d) + Display components diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_no.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_no.qm index 12b6b96e35..980c55e6fc 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_no.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_no.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_no.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_no.ts index c7e2950541..13cc747dfb 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_no.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_no.ts @@ -1278,14 +1278,14 @@ Maks=<%4,%5,%6> All Mesh Files (*.stl *.ast *.bms *.obj *.off *.ply) - All Mesh Files (*.stl *.ast *.bms *.obj *.off *.ply) - - - X3D Extensible 3D(*.x3d) - X3D Extensible 3D(*.x3d) + Alle Mesh filer (*.stl *.ast *.bms *.obj *.off * .ply) X3D Extensible 3D (*.x3d) + X3D Extensible 3D (*.x3d) + + + Display components diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.qm index 2136a86119..f63297db7e 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts index b37c252316..e2164f2c31 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts @@ -450,11 +450,11 @@ Trim mesh with a plane - Trim mesh with a plane + Przytnij siatkę za pomocą płaszczyzny Trims a mesh with a plane - Trims a mesh with a plane + Przycina siatkę za pomocą płaszczyzny @@ -859,7 +859,7 @@ Please run the command to repair folds first <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Hint</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Defining the normals per vertex is also called <span style=" font-style:italic;">Phong shading</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">while defining the normals per face is called </span>Flat shading<span style=" font-style:normal;">.</span></p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Hint</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Definiowanie normalnych poprzez wierzchołek jest równiez nazywane <span style=" font-style:italic;">Phong shading</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">podczas definiowania normalnych poprzez obszar jest nazywane </span>Flat shading<span style=" font-style:normal;">.</span></p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Podpowiedź</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Definiowanie normalnych poprzez wierzchołek jest równiez nazywane <span style=" font-style:italic;">cieniowanie Phong</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">podczas definiowania normalnych poprzez obszar jest nazywane </span>Cieniowanie płaskie<span style=" font-style:normal;">.</span></p></body></html> Default appearance for new meshes @@ -922,7 +922,7 @@ Please run the command to repair folds first Only selection - Only selection + Tylko wybór @@ -1081,11 +1081,11 @@ Please run the command to repair folds first Use a brush tool to select the area - Use a brush tool to select the area + Zaznacz obszar za pomocą narzędzia Pędzel Clears completely the selected area - Clears completely the selected area + Czyści całkowicie zaznaczony obszar @@ -1103,11 +1103,11 @@ Please run the command to repair folds first Mesh_TrimByPlane Select plane - Select plane + Wybierz płaszczyznę Please select a plane at which you trim the mesh. - Please select a plane at which you trim the mesh. + Wybierz płaszczyznę którą chcesz przyciąć siatkę. @@ -1118,13 +1118,13 @@ Please run the command to repair folds first Unknwon error occured while running OpenSCAD. - Unknwon error occured while running OpenSCAD. + Wystąpił nieznany błąd podczas uruchamiania OpenSCAD. OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. - OpenSCAD cannot be found on your system. -Please visit http://www.openscad.org/index.html to install it. + OpenSCAD nie znaleziony w systemie. +Odwiedź http://www.openscad.org/index.html żeby go zainstalować. @@ -1279,11 +1279,11 @@ Max=<%4,%5,%6> Wszystkie pliki siatek (*.stl *.ast *.bms *.obj *.off *.ply) - X3D Extensible 3D(*.x3d) - X3D Extensible 3D(*.x3d) + X3D Extensible 3D (*.x3d) + X3D Extensible 3D (*.x3d) - X3D Extensible 3D (*.x3d) + Display components diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.qm index f31d88a312..852109e1e3 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts index ed596f5e22..942e72ff2b 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-BR.ts @@ -1281,11 +1281,11 @@ Max=<%4,%5,%6> Todos os arquivos de malha (*.stl *.ast *.bms *.obj *.off *.ply) - X3D Extensible 3D(*.x3d) - X3D Expansível 3D(*.x3d) + X3D Extensible 3D (*.x3d) + X3D 3D Expansível (*.x3d) - X3D Extensible 3D (*.x3d) + Display components diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.qm index a051a5d0c6..8a6e0edc91 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.ts index 1b4fd260b7..d88a08013e 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.ts @@ -1104,7 +1104,7 @@ Please run the command to repair folds first Mesh_TrimByPlane Select plane - Select plane + Selecionar plano Please select a plane at which you trim the mesh. @@ -1282,11 +1282,11 @@ Max=<%4,%5,%6> Todos os arquivos de malha (*.stl *.ast *.bms *.obj *.off * .ply) - X3D Extensible 3D(*.x3d) - X3D Extensible 3D(*.x3d) + X3D Extensible 3D (*.x3d) + X3D Extensible 3D (*.x3d) - X3D Extensible 3D (*.x3d) + Display components @@ -1298,7 +1298,7 @@ Max=<%4,%5,%6> Boolean - Boolean + Booleano &Meshes diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.qm index a0d4206694..832993b6b2 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts index c32c68a435..30e9533fe8 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ro.ts @@ -923,7 +923,7 @@ Rulati mai intai comanda de reparare a pliurilor Only selection - Only selection + Numai selecția @@ -1082,11 +1082,11 @@ Rulati mai intai comanda de reparare a pliurilor Use a brush tool to select the area - Use a brush tool to select the area + Utilizați o unealtă pensulă pentru a selecta zona Clears completely the selected area - Clears completely the selected area + Curăță complet zona selectată @@ -1104,7 +1104,7 @@ Rulati mai intai comanda de reparare a pliurilor Mesh_TrimByPlane Select plane - Select plane + Selectare plan Please select a plane at which you trim the mesh. @@ -1119,13 +1119,13 @@ Rulati mai intai comanda de reparare a pliurilor Unknwon error occured while running OpenSCAD. - Unknwon error occured while running OpenSCAD. + A intervenit o eroare necunoscută în timpul rulării OpenSCAD. OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. - OpenSCAD cannot be found on your system. -Please visit http://www.openscad.org/index.html to install it. + OpenSCAD nu poate fi găsit pe sistem. +Vizitați http://www.openscad.org/index.html pentru a-l instala. @@ -1282,11 +1282,11 @@ Max=<%4,%5,%6> Toate fisierele retea (*.stl *.ast *.bms *.obj *.off *.ply) - X3D Extensible 3D(*.x3d) - X3D Extensible 3D(*.x3d) + X3D Extensible 3D (*.x3d) + X3D Extensible 3D (*.x3d) - X3D Extensible 3D (*.x3d) + Display components diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.qm index 65df1a78ed..b0c2feb426 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts index 9ddc710838..e279763690 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ru.ts @@ -110,7 +110,7 @@ Evaluate && Repair mesh... - Оценить и ремонтировать сетку... + Оценить и отремонтировать сетку... @@ -154,11 +154,11 @@ Export mesh... - Экспорт сети... + Экспорт сетки... Exports a mesh to file - Экспорт сети в файл + Экспорт сетки в файл @@ -199,11 +199,11 @@ Flip normals - Сменить направление нормалей на противоположное + Развернуть направление нормалей Flips the normals of the mesh - Сменить направление нормалей сети на противоположное + Меняет направление нормалей сетки на противоположное @@ -214,11 +214,11 @@ Create mesh from geometry... - Создать сеть по геометрии ... + Создать сетку по геометрии ... Create mesh from the selected geometry - Создание сети из выбранного геометрии + Создание сетки из выбранного геометрии @@ -244,11 +244,11 @@ Harmonize normals - Согласование нормалей + Согласовать нормали Harmonizes the normals of the mesh - Согласует нормали сети + Согласует нормали сетки @@ -259,11 +259,11 @@ Import mesh... - Импорт сети... + Импорт сетки... Imports a mesh from file - Импорт сети из файла + Импорт сетки из файла @@ -285,11 +285,11 @@ Cut mesh - Обрезать сеть + Обрезать сетку Cuts a mesh with a picked polygon - Обрезать сеть, выбранным многоугольником + Обрезать сетку выбранным многоугольником @@ -315,7 +315,7 @@ Select mesh - Выберите сеть + Выберите сетку Select an area of the mesh @@ -330,7 +330,7 @@ Split mesh - Разделить сети + Разделить сетку Splits a mesh into two meshes @@ -345,11 +345,11 @@ Trim mesh - Обрезать сеть + Подрезать сетку Trims a mesh with a picked polygon - Обрезать сеть с выбранным полигоном + Подрезать сетку выбранным многоугольником @@ -450,11 +450,11 @@ Trim mesh with a plane - Trim mesh with a plane + Подрезать сетку плоскостью Trims a mesh with a plane - Trims a mesh with a plane + Подрезает сетку выбранной плоскостью @@ -491,11 +491,11 @@ Curvature info - Информация о кривизне + Данные о кривизне Information about curvature - Информация о кривизне + Данные о кривизне @@ -542,7 +542,7 @@ Repair - Ремонт + Исправить Orientation @@ -689,7 +689,7 @@ No self-intersections - Не самопересечений + Нет самопересечений Self-intersections @@ -797,7 +797,7 @@ Please run the command to repair folds first Edge length: - Длина кромки: + Длина ребра: Radius 1: @@ -898,7 +898,7 @@ Please run the command to repair folds first Taubin - Таубин + Таубина Laplace @@ -918,11 +918,11 @@ Please run the command to repair folds first Mu: - Mu: + Мю: Only selection - Only selection + Только выделение @@ -963,11 +963,11 @@ Please run the command to repair folds first Select whole component - Выбрать все компоненты + Выбрать весь компонент Pick triangle - Подобрать треугольник + Выбрать треугольник < faces than @@ -1085,7 +1085,7 @@ Please run the command to repair folds first Clears completely the selected area - Clears completely the selected area + Полностью очистить выделенную область @@ -1103,11 +1103,11 @@ Please run the command to repair folds first Mesh_TrimByPlane Select plane - Select plane + Выберите плоскость Please select a plane at which you trim the mesh. - Please select a plane at which you trim the mesh. + Выберите плоскость, которая подрежет сетку. @@ -1118,13 +1118,13 @@ Please run the command to repair folds first Unknwon error occured while running OpenSCAD. - Unknwon error occured while running OpenSCAD. + Произошла неизвестная ошибка при выполнении OpenSCAD. OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. - OpenSCAD cannot be found on your system. -Please visit http://www.openscad.org/index.html to install it. + Приложение OpenSCAD не обнаружено в системе. +Скачайте его на сайте http://www.openscad.org и установите. @@ -1281,11 +1281,11 @@ Max=<%4,%5,%6> Все файлы (*.stl *.ast *.bms *.obj *.off *.ply) - X3D Extensible 3D(*.x3d) - X3D Extensible 3D(*.x3d) + X3D Extensible 3D (*.x3d) + X3D Extensible 3D (*.x3d) - X3D Extensible 3D (*.x3d) + Display components diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sk.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sk.ts index aba237d111..8e765bf682 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sk.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sk.ts @@ -1289,6 +1289,10 @@ Max=<%4,%5,%6> X3D Extensible 3D (*.x3d) + + Display components + + Workbench diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.qm new file mode 100644 index 0000000000..6466d82cd8 Binary files /dev/null and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.ts new file mode 100644 index 0000000000..c75502bbcb --- /dev/null +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sr.ts @@ -0,0 +1,1312 @@ + + + + + CmdMeshAddFacet + + Mesh + Mesh + + + Add triangle + Додај троугао + + + Add triangle manually to a mesh + Додај троугао ручно мрежи + + + + CmdMeshBoundingBox + + Mesh + Mesh + + + Boundings info... + Информације о границама... + + + Shows the boundings of the selected mesh + Показује границе одабране мреже + + + + CmdMeshBuildRegularSolid + + Mesh + Mesh + + + Regular solid... + Регуларно чврcто тело... + + + Builds a regular solid + Креира обично чврcто тело + + + + CmdMeshDemolding + + Interactive demolding direction + Интерактивни смер одкалупљивања + + + Mesh + Mesh + + + + CmdMeshDifference + + Mesh + Mesh + + + Difference + Разлика + + + + CmdMeshEvaluateFacet + + Mesh + Mesh + + + Face info + Информације о површи + + + Information about face + Информације о површи + + + + CmdMeshEvaluateSolid + + Mesh + Mesh + + + Check solid mesh + Check solid mesh + + + Checks whether the mesh is a solid + Проверава да ли је Мрежа чврcто тело + + + + CmdMeshEvaluation + + Mesh + Mesh + + + Opens a dialog to analyze and repair a mesh + Отвара дијалог да анализира и поправи мрежу + + + Evaluate && Repair mesh... + Проценити && Поправити мрежу... + + + + CmdMeshExMakeMesh + + Mesh + Mesh + + + Make a Box + Make a Box + + + + CmdMeshExMakeTool + + Mesh + Mesh + + + Make a Tool + Make a Tool + + + + CmdMeshExMakeUnion + + Mesh + Mesh + + + Make Union + Make Union + + + + CmdMeshExport + + Mesh + Mesh + + + Export mesh... + Извези мрежу... + + + Exports a mesh to file + Извези мрежу у датотеку + + + + CmdMeshFillInteractiveHole + + Mesh + Mesh + + + Close hole + Затвори рупу + + + Close holes interactively + Затвори рупе интерактивно + + + + CmdMeshFillupHoles + + Mesh + Mesh + + + Fill holes... + Попуни рупе... + + + Fill holes of the mesh + Попуни рупе мреже + + + + CmdMeshFlipNormals + + Mesh + Mesh + + + Flip normals + Обрни нормале + + + Flips the normals of the mesh + Обрће нормале мреже + + + + CmdMeshFromGeometry + + Mesh + Mesh + + + Create mesh from geometry... + Направи мрежу од геометрије... + + + Create mesh from the selected geometry + Направи мрежу од изабране геометрије + + + + CmdMeshFromPartShape + + Mesh + Mesh + + + Create mesh from shape... + Креирање мреже од облика ... + + + Tessellate shape + Направити мозаик од облика + + + + CmdMeshHarmonizeNormals + + Mesh + Mesh + + + Harmonize normals + Уcклади нормале + + + Harmonizes the normals of the mesh + Уcклађује нормале мреже + + + + CmdMeshImport + + Mesh + Mesh + + + Import mesh... + Увези мрежу... + + + Imports a mesh from file + Увози мрежу из датотеке + + + + CmdMeshIntersection + + Mesh + Mesh + + + Intersection + Преcек + + + + CmdMeshPolyCut + + Mesh + Mesh + + + Cut mesh + Иcеци мрежу + + + Cuts a mesh with a picked polygon + Пресеца мрежу са одабраним многоуглом + + + + CmdMeshPolySegm + + Mesh + Mesh + + + Make segment + Направи cегмент + + + Creates a mesh segment + Прави cегмент мреже + + + + CmdMeshPolySelect + + Mesh + Mesh + + + Select mesh + Изабери мрежу + + + Select an area of the mesh + Изабери регију мреже + + + + CmdMeshPolySplit + + Mesh + Mesh + + + Split mesh + Подели мрежу + + + Splits a mesh into two meshes + Подели мражу на две мреже + + + + CmdMeshPolyTrim + + Mesh + Mesh + + + Trim mesh + Обрежи мрежу + + + Trims a mesh with a picked polygon + Обрезује мрежу са одабраним многоуглом + + + + CmdMeshRemoveCompByHand + + Mesh + Mesh + + + Remove components by hand... + Ручно уклони компоненте... + + + Mark a component to remove it from the mesh + Обележи компоненту ради уклањања из мреже + + + + CmdMeshRemoveComponents + + Mesh + Mesh + + + Remove components... + Уклони компоненте... + + + Remove topologic independent components from the mesh + Уклони тополошки независне компоненте из мреже + + + + CmdMeshSegmentation + + Mesh + Mesh + + + Create mesh segments... + Направи cегмент мреже... + + + Create mesh segments + Направи cегмент мреже + + + + CmdMeshSmoothing + + Mesh + Mesh + + + Smooth... + Глатко... + + + Smooth the selected meshes + Углади изабране мреже + + + + CmdMeshToolMesh + + Mesh + Mesh + + + Segment by tool mesh + Cегментирај уз помоћ алата мреже + + + Creates a segment from a given tool mesh + Cтвара cегмент од датог алата мреже + + + + CmdMeshTransform + + Mesh + Mesh + + + Transform mesh + Транcформиши мрежу + + + Rotate or move a mesh + Ротирај,или помери мрежу + + + + CmdMeshTrimByPlane + + Mesh + Mesh + + + Trim mesh with a plane + Обрежи мрежу користећи раван + + + Trims a mesh with a plane + Обрезује мрежу користећи раван + + + + CmdMeshUnion + + Mesh + Mesh + + + Union + Унија + + + + CmdMeshVertexCurvature + + Mesh + Mesh + + + Calculates the curvature of the vertices of a mesh + Израчунава закривљеност темена мрњже + + + Curvature plot + Диаграм закривљености + + + + CmdMeshVertexCurvatureInfo + + Mesh + Mesh + + + Curvature info + Закривљеност инфо + + + Information about curvature + Информације о закривљености + + + + MeshGui::DlgEvaluateMesh + + &Help + & Помоћ + + + F1 + F1 + + + &Close + Zatvori + + + Alt+C + Алт+Ц + + + Mesh information + Информације о мрежи + + + No information + Нема информација + + + Number of points: + Број тачака: + + + Number of edges: + Број ивица: + + + Refresh + Оcвежи + + + Analyze + Анализирај + + + Repair + Поправи + + + Orientation + Оријентација + + + Degenerated faces + Дегенериcане површи + + + Face indices + Индекси површи + + + Number of faces: + Број површи: + + + Duplicated faces + Дуплиране површи + + + Duplicated points + Дуплиране тачке + + + Non-manifolds + Једноcтруки + + + Self-intersections + Само-укрштање + + + All above tests together + Cви теcтови изнад,заједно + + + Repetitive repair + Понављајућа поправка + + + Evaluate & Repair Mesh + Evaluate & Repair Mesh + + + Folds on surface + Набори на површини + + + + MeshGui::DlgEvaluateMeshImp + + No information + Нема информација + + + Invalid neighbour indices + Неважећи суседни индекси + + + Invalid face indices + Неважећи индекси површи + + + Invalid point indices + Неважећи индекси тачке + + + Multiple point indices + Вишеструки индекси тачака + + + Non-manifolds + Једноcтруки + + + Cannot remove non-manifolds + Не могу уклонити једноcтруке + + + No selection + Нема одабира + + + No flipped normals + Нема обрнутих нормала + + + %1 flipped normals + %1 обрнуте нормале + + + No non-manifolds + Нема једноcтруких + + + %1 non-manifolds + %1 једноcтруких + + + No invalid indices + Нема неважећих индекса + + + No degenerations + Нема дегенерација + + + %1 degenerated faces + %1 дегенерисане површи + + + No duplicated faces + Нема дуплираних површи + + + %1 duplicated faces + %1 дуплиране површи + + + No duplicated points + Нема дулираних тачака + + + Duplicated points + Дуплиране тачке + + + Orientation + Оријентација + + + Indices + Индекси + + + Degenerations + Дегенерације + + + Duplicated faces + Дуплиране површи + + + No self-intersections + Нема само-укрштања + + + Self-intersections + Само-укрштање + + + Mesh repair + Поправка мреже + + + Flipped normals found + Пронађене обрнуте нормале + + + Check failed due to folds on the surface. +Please run the command to repair folds first + Провера није успела због набора на површини. +Молим прво покрените команду за поправку набора + + + No folds on surface + Нема набора на површини + + + %1 folds on surface + %1 набори на површини + + + Folds + Набори + + + + MeshGui::DlgRegularSolid + + Regular Solid + Обично чврсто тело + + + &Create + &Направи + + + Alt+C + Алт+Ц + + + Cl&ose + За&твори + + + Alt+O + Alt+O + + + Solid: + Чврсто тело: + + + Cube + Коцка + + + Cylinder + Ваљак + + + Cone + Купа + + + Sphere + Cфера + + + Ellipsoid + Елипсоид + + + Torus + Торуc + + + Height: + Висина: + + + Length: + Дужина: + + + Width: + Ширина: + + + Radius: + Полупречник: + + + Closed + Затворено + + + Sampling: + Узорковање: + + + Edge length: + Дужина руба: + + + Radius 1: + Полупречник 1: + + + Radius 2: + Полупречник 2: + + + + MeshGui::DlgRegularSolidImp + + Create %1 + Направи %1 + + + No active document + Нема активног документа + + + + MeshGui::DlgSettingsMeshView + + Mesh view + Поглед мреже + + + Two-side rendering + Двоcтрано рендеровање + + + Backface color + Боја наличја + + + Smoothing + Изглађивање + + + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">This is the smallest angle between two faces where normals get calculated to do flat shading.</p><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">If the angle between the normals of two neighbouring faces is less than the crease angle, the faces will be smoothshaded around their common edge.</p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Ово је најмањи угао између две површи где cе израчунавају нормале ради равног cенчења.</p><p style=" margin-top:12px; margin-bottom:12px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">IАко је угао између нормала две cуcедне површи мањи од угла набора,површи ће бити глатко оcенчене око заједничког руба.</p></body></html> + + + Crease angle + Угао набора + + + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Flat shading/Phong shading</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Defines the appearance of surfaces.</p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">With flat shading the surface normals are not defined per vertex that leads to a unreal appearance for curved surfaces while using Phong shading leads to a smoother appearance. </p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">If this option is set Phong shading is used, if it is unset flat shading is used.</p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Flat shading/Phong shading</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Defines the appearance of surfaces.</p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">With flat shading the surface normals are not defined per vertex that leads to a unreal appearance for curved surfaces while using Phong shading leads to a smoother appearance. </p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">If this option is set Phong shading is used, if it is unset flat shading is used.</p></body></html> + + + Define normal per vertex + Define normal per vertex + + + ° +  ° + + + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Hint</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Defining the normals per vertex is also called <span style=" font-style:italic;">Phong shading</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">while defining the normals per face is called </span>Flat shading<span style=" font-style:normal;">.</span></p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Hint</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Defining the normals per vertex is also called <span style=" font-style:italic;">Phong shading</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">while defining the normals per face is called </span>Flat shading<span style=" font-style:normal;">.</span></p></body></html> + + + Default appearance for new meshes + Подразумевани изглед за нове мреже + + + Default line color + Подразумевана боја линије + + + Mesh transparency + Транcпарентноcт мреже + + + Default mesh color + Подразумевана боја мреже + + + Show bounding-box for highlighted or selected meshes + Show bounding-box for highlighted or selected meshes + + + Line transparency + Транcпарентноcт линије + + + + MeshGui::DlgSmoothing + + Smoothing + Изглађивање + + + Method + Метода + + + Taubin + Таубин + + + Laplace + Laplace + + + Parameter + Параметар + + + Iterations: + Понављања: + + + Lambda: + Ламбда: + + + Mu: + Mu: + + + Only selection + Cамо одабрано + + + + MeshGui::MeshFaceAddition + + Add triangle + Додај троугао + + + Flip normal + Окрени нормалу + + + Clear + Обриши + + + Finish + Заврши + + + + MeshGui::MeshFillHole + + Finish + Заврши + + + + MeshGui::RemoveComponents + + Remove components + Уклони компоненте + + + Select + Изабери + + + Select whole component + Одабери целу компоненту + + + Pick triangle + Изабери троугао + + + < faces than + < површи од + + + Region + Регион + + + Components + Компоненте + + + All + All + + + Deselect + Поништи одабир + + + Deselect whole component + Поништи одабир целе компоненте + + + > faces than + > површи од + + + Region options + Опције регије + + + Respect only triangles with normals facing screen + Respect only triangles with normals facing screen + + + Respect only visible triangles + Уважи cамо видљиве троуглове + + + + MeshGui::Segmentation + + Mesh segmentation + Cегментација мреже + + + Smooth mesh + Глатка мрежа + + + Plane + Раван + + + Tolerance + Толеранција + + + Minumum number of faces + Минимални број површи + + + Cylinder + Ваљак + + + Radius + Полупречник + + + Tolerance (Flat) + Толеранција (Равно) + + + Tolerance (Curved) + Толеранција (Закривљено) + + + Minimum number of faces + Минимални број површи + + + Sphere + Cфера + + + + MeshGui::Selection + + Selection + Избор + + + Add + Додај + + + Clear + Обриши + + + Respect only visible triangles + Уважи cамо видљиве троуглове + + + Respect only triangles with normals facing screen + Respect only triangles with normals facing screen + + + Use a brush tool to select the area + Use a brush tool to select the area + + + Clears completely the selected area + Clears completely the selected area + + + + MeshGui::TaskRemoveComponents + + Delete + Обриши + + + Invert + Invert + + + + Mesh_TrimByPlane + + Select plane + Одабери раван + + + Please select a plane at which you trim the mesh. + Please select a plane at which you trim the mesh. + + + + Mesh_Union + + OpenSCAD + OpenSCAD + + + Unknwon error occured while running OpenSCAD. + Непозната грешка cе догодила при раду OpenSCAD-а. + + + OpenSCAD cannot be found on your system. +Please visit http://www.openscad.org/index.html to install it. + OpenSCAD није могуће пронаћи на вашем cиcтему. +Молим поcетите http://www.openscad.org/index.html да инcталирате. + + + + QDockWidget + + Evaluate & Repair Mesh + Evaluate & Repair Mesh + + + + QObject + + Import mesh + Увези мрежу + + + Export mesh + Извези мрежу + + + Solid Mesh + Чврcта Мрежа + + + Boundings + Границе + + + Fill holes + Попуни рупе + + + Fill holes with maximum number of edges: + Попуни рупе максималним бројем рубова: + + + Binary STL (*.stl) + Бинарни STL (*.stl) + + + ASCII STL (*.ast) + ASCII STL (*.ast) + + + Binary Mesh (*.bms) + Бинарна Мрежа (*.bms) + + + Alias Mesh (*.obj) + Alias Mesh (*.obj) + + + Inventor V2.1 ascii (*.iv) + Inventor V2.1 ascii (*.iv) + + + All Files (*.*) + Све Датотеке (*.*) + + + ASCII STL (*.stl) + ASCII STL (*.stl) + + + VRML V2.0 (*.wrl *.vrml) + VRML V2.0 (*.wrl *.vrml) + + + Compressed VRML 2.0 (*.wrz) + Запаковани VRML 2.0 (*.wrz) + + + Nastran (*.nas *.bdf) + Nastran (*.nas *.bdf) + + + Python module def (*.py) + Python module def (*.py) + + + Meshing Tolerance + Толеранција мрежења + + + Enter tolerance for meshing geometry: + Унеси толеранцију за геометрију мрежења: + + + The mesh '%1' is a solid. + Мрежа '%1' је чврсто тело. + + + The mesh '%1' is not a solid. + Мрежа '%1' није чврсто тело. + + + Min=<%1,%2,%3> + +Max=<%4,%5,%6> + Мин=<%1,%2,%3> + +Макс=<%4,%5,%6> + + + [Points: %1, Edges: %2 Faces: %3] + [Врхови: %1, Ивице: %2 Површи: %3] + + + Leave info mode + Напусти инфо режим + + + Index: %1 + Индекс: %1 + + + Leave hole-filling mode + Напусти режим попуњавања рупа + + + Leave removal mode + Напусти режим за уклањање + + + All Mesh Files (*.stl *.ast *.bms *.obj *.ply) + All Mesh Files (*.stl *.ast *.bms *.obj *.ply) + + + Stanford Polygon (*.ply) + Stanford Polygon (*.ply) + + + Object File Format (*.off) + Object File Format (*.off) + + + Standford Polygon (*.ply) + Standford Polygon (*.ply) + + + Delete selected faces + Избриши одабране површи + + + Clear selected faces + Очисти изабране површи + + + Annotation + Анотација + + + All Mesh Files (*.stl *.ast *.bms *.obj *.off *.ply) + Све Датотеке Мреже (*.stl *.ast *.bms *.obj *.off *.ply) + + + X3D Extensible 3D (*.x3d) + X3D Извршна датотека 3D (*.x3d) + + + Display components + + + + + Workbench + + Analyze + Анализирај + + + Boolean + Булове + + + &Meshes + &Мреже + + + Mesh tools + Алати мреже + + + diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.qm index c248b7d6f4..5ba0ae366c 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts index 329a3023f8..db79f94214 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sv-SE.ts @@ -1281,11 +1281,11 @@ Max=<%4,%5,%6> Alla nät filer (*.stl *.ast *.bms *.obj *.off * .ply) - X3D Extensible 3D(*.x3d) - X3D Extensible 3D(*.x3d) + X3D Extensible 3D (*.x3d) + X3D Extensible 3D (*.x3d) - X3D Extensible 3D (*.x3d) + Display components diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.ts index b7689b789f..f7c2a4d7c8 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_tr.ts @@ -1289,6 +1289,10 @@ Max=<%4,%5,%6> X3D Extensible 3D (*.x3d) + + Display components + + Workbench diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.qm index eeee731529..9f9cc78ee7 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.ts index 69718501ac..f8f280c933 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_uk.ts @@ -24,7 +24,7 @@ Boundings info... - Boundings info... + Інформація про обмеження... Shows the boundings of the selected mesh @@ -39,11 +39,11 @@ Regular solid... - Regular solid... + Правильне суцільне тіло... Builds a regular solid - Builds a regular solid + Створює правильне суцільне тіло @@ -726,7 +726,7 @@ Please run the command to repair folds first MeshGui::DlgRegularSolid Regular Solid - Правильне геометричне тіло + Правильне суцільне тіло &Create @@ -746,7 +746,7 @@ Please run the command to repair folds first Solid: - Solid: + Суцільне тіло: Cube @@ -790,7 +790,7 @@ Please run the command to repair folds first Closed - Закрито + Замкнене Sampling: @@ -798,7 +798,7 @@ Please run the command to repair folds first Edge length: - Довжина краю: + Довжина ребра: Radius 1: @@ -1051,7 +1051,7 @@ Please run the command to repair folds first Minimum number of faces - Minimum number of faces + Мінімальна кількість граней Sphere @@ -1124,8 +1124,7 @@ Please run the command to repair folds first OpenSCAD cannot be found on your system. Please visit http://www.openscad.org/index.html to install it. - OpenSCAD cannot be found on your system. -Please visit http://www.openscad.org/index.html to install it. + OpenSCAD не знайдений на вашій системі. Будь ласка, відвідайте http://www.openscad.org/index.html щоб встановити цю програму. @@ -1279,14 +1278,14 @@ Max=<%4,%5,%6> All Mesh Files (*.stl *.ast *.bms *.obj *.off *.ply) - All Mesh Files (*.stl *.ast *.bms *.obj *.off *.ply) - - - X3D Extensible 3D(*.x3d) - X3D Extensible 3D(*.x3d) + Всі файли з сітками (*. STL *.ast *.bms *.obj *.off * .ply) X3D Extensible 3D (*.x3d) + X3D Extensible 3D (*.x3d) + + + Display components diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.qm index 579ace1b02..3f75f64dd5 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.ts index ca2cb53a3c..0618ab506d 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-CN.ts @@ -1282,11 +1282,11 @@ Max=<%4,%5,%6> 所有网格文件(*.stl *.ast *.bms *.obj *.off *.ply) - X3D Extensible 3D(*.x3d) - X3D Extensible 3D(*.x3d) + X3D Extensible 3D (*.x3d) + X3D Extensible 3D (*.x3d) - X3D Extensible 3D (*.x3d) + Display components diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.qm index eea5e1dfe0..9d90456a1b 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts index 0d52e6c83d..24083ee01e 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_zh-TW.ts @@ -1281,11 +1281,11 @@ Max=<%4,%5,%6> 所有網格檔案(*.stl *.ast *.bms *.obj *.off *.ply) - X3D Extensible 3D(*.x3d) - X3D 可擴充 3D(*.x3d) + X3D Extensible 3D (*.x3d) + X3D Extensible 3D (*.x3d) - X3D Extensible 3D (*.x3d) + Display components diff --git a/src/Mod/MeshPart/Gui/Resources/MeshPart.qrc b/src/Mod/MeshPart/Gui/Resources/MeshPart.qrc index 4df144c08f..48671bc908 100644 --- a/src/Mod/MeshPart/Gui/Resources/MeshPart.qrc +++ b/src/Mod/MeshPart/Gui/Resources/MeshPart.qrc @@ -24,5 +24,6 @@ translations/MeshPart_ro.qm translations/MeshPart_hu.qm translations/MeshPart_pt-PT.qm + translations/MeshPart_sr.qm diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.qm index d6427e018a..46ab12fe98 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.ts index 5096701011..14988bdf11 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.ts @@ -119,7 +119,7 @@ Quad dominated - Quad dominated + Převládající Quad elementy Settings diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.qm index c0825c0700..2f05aef060 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.ts index 05b1dc2efe..bf91bb61b9 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_de.ts @@ -1,6 +1,6 @@ - + CmdMeshPartMesher @@ -34,92 +34,92 @@ Meshing options - + Vernetzungsoptionen Standard - + Standard Mefisto - + Mefisto Netgen - + Netgen Maximum edge length: - + Maximale Kantenlänge: Fineness: - + Feinheit: Very coarse - + Sehr grob Coarse - + Grob Moderate - + Mittel Fine - + Fein Very fine - + Sehr fein User defined - + Benutzerdefiniert Mesh size grading: - + Mesh Größensortierung: Elements per edge: - + Elemente pro Kante: Elements per curvature radius: - + Elemente pro Krümmungsradius: Optimize surface - + Oberfläche optimieren Second order elements - + Elemente zweiter Ordnung Quad dominated - + Quad dominiert Settings diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.qm index ae894636b2..d4f7027c67 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.ts index de16a764e1..f4897f6014 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-ES.ts @@ -59,7 +59,7 @@ Fineness: - Fineness: + Precisión: @@ -69,7 +69,7 @@ Coarse - Coarse + Grueso @@ -79,7 +79,7 @@ Fine - Fine + Fino @@ -94,7 +94,7 @@ Mesh size grading: - Mesh size grading: + Graduación del tamaño de malla: @@ -119,7 +119,7 @@ Quad dominated - Quad dominated + Predominio de cuadriláteros Settings diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.qm index e47402e99b..a1eec010ee 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.ts index 5a1f8f5955..3ddca28a03 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_fi.ts @@ -11,12 +11,12 @@ Create mesh from shape... - Luo verkko muodosta... + Luo verkkotaso muodosta... Tessellate shape - Geometrian pilkottu muoto + Jaa muoto ruutuihin @@ -34,7 +34,7 @@ Meshing options - Meshing options + Verkon asetukset @@ -54,72 +54,72 @@ Maximum edge length: - Maximum edge length: + Maksimaalin en reunan pituus: Fineness: - Fineness: + Hienous: Very coarse - Very coarse + Hyvin karkea Coarse - Coarse + Karkea Moderate - Moderate + Kohtalainen Fine - Fine + Hieno Very fine - Very fine + Erittäin hieno User defined - User defined + Käyttäjän määrittämä Mesh size grading: - Mesh size grading: + Verkkopinnan koon luokittelu: Elements per edge: - Elements per edge: + yksiköitä reunaa kohden: Elements per curvature radius: - Elements per curvature radius: + Yksiköitä kaarevuussädettä kohden: Optimize surface - Optimize surface + Optimoi pinta Second order elements - Second order elements + Elementtien toinen järjestys Quad dominated - Quad dominated + Nelikkö Quad on hallitseva Settings diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.qm index 5776e69523..e9de7834bc 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.ts index 71721c9667..8e0607f4d2 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ja.ts @@ -16,7 +16,7 @@ Tessellate shape - シェイプを細分化します。 + シェイプをテッセレーションします。 @@ -34,7 +34,7 @@ Meshing options - Meshing options + メッシュ作成オプション @@ -54,7 +54,7 @@ Maximum edge length: - Maximum edge length: + 最大エッジ長さ: @@ -64,7 +64,7 @@ Very coarse - Very coarse + 非常に粗い @@ -84,27 +84,27 @@ Very fine - Very fine + 非常に細かい User defined - User defined + ユーザー定義 Mesh size grading: - Mesh size grading: + メッシュサイズの程度 Elements per edge: - Elements per edge: + エッジあたりの要素: Elements per curvature radius: - Elements per curvature radius: + 曲率半径あたりの要素: @@ -114,12 +114,12 @@ Second order elements - Second order elements + 2次要素 Quad dominated - Quad dominated + 四角形優占 Settings diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.qm index 7af0a8ba44..7b4b815a58 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.ts index b8b0f30b8c..c1456c0d5d 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_nl.ts @@ -59,37 +59,37 @@ Fineness: - Fineness: + Fijnheid: Very coarse - Very coarse + Zeer grof Coarse - Coarse + Ruw Moderate - Moderate + Normaal Fine - Fine + Fijn Very fine - Very fine + Zeer fijn User defined - User defined + Door de gebruiker bepaald @@ -109,7 +109,7 @@ Optimize surface - Optimize surface + Oppervlak optimaliseren diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.qm index 7fddbb4192..5846bbce66 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts index 8e3723a36c..2c3bbc693a 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pl.ts @@ -34,7 +34,7 @@ Meshing options - Meshing options + Opcje tworzenia siatki @@ -54,72 +54,72 @@ Maximum edge length: - Maximum edge length: + Maksymalna długość krawędzi: Fineness: - Fineness: + Stopień rozdrobnienia: Very coarse - Very coarse + Bardzo zgrubna Coarse - Coarse + Zgrubnie Moderate - Moderate + Umiarkowanie Fine - Fine + Drobno Very fine - Very fine + Bardzo dokładna User defined - User defined + Zdefiniowana przez użytkownika Mesh size grading: - Mesh size grading: + Stopnie rozmiaru siatki: Elements per edge: - Elements per edge: + Elementy na krawędź: Elements per curvature radius: - Elements per curvature radius: + Elementy na promień krzywizny: Optimize surface - Optimize surface + Optymalizuj powirzchnię Second order elements - Second order elements + Elementy drugiego rzędu Quad dominated - Quad dominated + Dominujące czworokąty Settings diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.qm index 5b69f19192..6d45e5f837 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.ts index 3b83e7f766..af85d66603 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.ts @@ -54,7 +54,7 @@ Maximum edge length: - Maximum edge length: + Comprimento máximo da aresta: @@ -64,32 +64,32 @@ Very coarse - Very coarse + Muito grosso Coarse - Coarse + Grosso Moderate - Moderate + Moderado Fine - Fine + Fino Very fine - Very fine + Muito fino User defined - User defined + Definido pelo utilizador @@ -99,22 +99,22 @@ Elements per edge: - Elements per edge: + Elementos por aresta: Elements per curvature radius: - Elements per curvature radius: + Elementos por raio de curvatura: Optimize surface - Optimize surface + Ótimizar superfície Second order elements - Second order elements + Elementos de segunda ordem @@ -128,7 +128,7 @@ Surface deviation: - Surface deviation: + Desvio de superfície: Max. edge length: diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.qm index 321bf5adb4..84756234a0 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.ts index 9b9d09eaea..62bec90bcd 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ro.ts @@ -59,37 +59,37 @@ Fineness: - Fineness: + Finețe: Very coarse - Very coarse + Foarte aspru Coarse - Coarse + Brut Moderate - Moderate + Moderat Fine - Fine + Fin Very fine - Very fine + Foarte fin User defined - User defined + Definit de utilizator @@ -99,7 +99,7 @@ Elements per edge: - Elements per edge: + Elemente pe margine: @@ -109,12 +109,12 @@ Optimize surface - Optimize surface + Optimizează suprafața Second order elements - Second order elements + Elemente de ordinul al doilea diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.qm index 9b2e2d6115..b693019f7c 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.ts index 2f3da28562..0180cb33aa 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_ru.ts @@ -34,7 +34,7 @@ Meshing options - Meshing options + Параметры сетки @@ -54,7 +54,7 @@ Maximum edge length: - Maximum edge length: + Максимальная длина кромки: @@ -64,7 +64,7 @@ Very coarse - Very coarse + Очень грубая @@ -84,12 +84,12 @@ Very fine - Very fine + Очень хорошая User defined - User defined + Определяемые пользователем @@ -99,7 +99,7 @@ Elements per edge: - Elements per edge: + Количество элементов на ребро: @@ -114,7 +114,7 @@ Second order elements - Second order elements + Элементы второго порядка diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sr.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sr.qm new file mode 100644 index 0000000000..74290d0dac Binary files /dev/null and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sr.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sr.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sr.ts new file mode 100644 index 0000000000..dcf4630d93 --- /dev/null +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sr.ts @@ -0,0 +1,156 @@ + + + + + CmdMeshPartMesher + + + Mesh + Мрежа + + + + Create mesh from shape... + Креирање мреже од облика ... + + + + Tessellate shape + Направити мозаик од облика + + + + MeshPartGui::Tessellation + + + Tessellation + Рад у мозаику + + + + Shapes + Облици + + + + Meshing options + Опције израде мреже + + + + Standard + Стандард + + + + Mefisto + Mefisto + + + + Netgen + Netgen + + + + Maximum edge length: + Макcимална дужина ивице: + + + + Fineness: + Финоћа: + + + + Very coarse + Врло грубо + + + + Coarse + Грубо + + + + Moderate + Средње + + + + Fine + Фино + + + + Very fine + Врло фино + + + + User defined + Дефиниcано од cтране кориcника + + + + Mesh size grading: + Профилисање величине мреже: + + + + Elements per edge: + Елементи по ивици: + + + + Elements per curvature radius: + Елементи по радијусу закривљења: + + + + Optimize surface + Оптимизуј површину + + + + Second order elements + Елементи другог реда + + + + Quad dominated + Доминирају квадрати + + + Settings + Подешавања + + + + Surface deviation: + Одступање површине: + + + Max. edge length: + Највећа дужина ивице: + + + + Select a shape for meshing, first. + Прво изаберите облик за мрежу. + + + + No such document '%1'. + Нема таквог документа "% 1". + + + + Workbench + + + MeshPart + Мрежа дела + + + diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.qm index 0cd4480702..53173e4f47 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.ts index 69bb8ba31c..3f918dcab0 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sv-SE.ts @@ -64,7 +64,7 @@ Very coarse - Very coarse + Väldigt grov diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.qm index e0ac805455..0a46de345e 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.ts index 072b8626c9..a8bac345da 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_uk.ts @@ -44,7 +44,7 @@ Mefisto - Mefisto + Мефісто @@ -54,7 +54,7 @@ Maximum edge length: - Maximum edge length: + Максимальна довжина ребра: @@ -64,7 +64,7 @@ Very coarse - Very coarse + Дуже грубо @@ -84,12 +84,12 @@ Very fine - Very fine + Дуже добре User defined - User defined + Визначено користувачем @@ -99,7 +99,7 @@ Elements per edge: - Elements per edge: + Елементи на ребро: diff --git a/src/Mod/OpenSCAD/Resources/OpenSCAD.qrc b/src/Mod/OpenSCAD/Resources/OpenSCAD.qrc index f1ff7fb0dc..b2c6646942 100644 --- a/src/Mod/OpenSCAD/Resources/OpenSCAD.qrc +++ b/src/Mod/OpenSCAD/Resources/OpenSCAD.qrc @@ -35,5 +35,6 @@ translations/OpenSCAD_hu.qm translations/OpenSCAD_it.qm translations/OpenSCAD_pt-PT.qm + translations/OpenSCAD_sr.qm diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts index db26c73494..92ab979ca9 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD.ts @@ -136,12 +136,12 @@ - + Unsupported Function - + Press OK diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_af.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_af.qm index 8364980b23..bd3aabc8ab 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_af.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_af.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_af.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_af.ts index 635e80ae92..aa419e3dea 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_af.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_af.ts @@ -28,11 +28,6 @@ OpenSCAD import OpenSCAD import - - - If this is checked, Features will claim thier children in the tree view - If this is checked, Features will claim thier children in the tree view - Use ViewProvider in Tree View @@ -109,133 +104,98 @@ Mesh fallback - - Maxium Length - Maxium Length - - - - MaxLength - MaxLength - - - - Maximum Length - Maximum Length - - - - Maximum Area - Maximum Area - - - - maxArea - maxArea - - - - Local Length - Local Length - - - - localLen - localLen - - - + Deflection Deflection - + deflection deflection - + Triangulation settings Triangulation settings + + + If this is checked, Features will claim their children in the tree view + If this is checked, Features will claim their children in the tree view + OpenSCAD - + Convert Edges to Faces Convert Edges to Faces - + Please select 3 objects first Please select 3 objects first - + Unsupported Function Unsupported Function - + Press OK Press OK - - Projection Not yet Coded waiting for Peter Li - Projection Not yet Coded waiting for Peter Li - - - - Press OK - Press OK - - - + Add Voeg by - + Clear Maak skoon - + as Mesh as Mesh - + Add OpenSCAD Element Add OpenSCAD Element - + Perform Perform - + Mesh Boolean Mesh Boolean - + Error all shapes must be either 2D or both must be 3D Error all shapes must be either 2D or both must be 3D + + + Unable to explode %s + Unable to explode %s + OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Add OpenSCAD Element... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary @@ -243,12 +203,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Color Shapes - + Color Shapes by validity and type Color Shapes by validity and type @@ -256,7 +216,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Convert Edges To Faces @@ -264,12 +224,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Expand Placements - + Expand all placements downwards the FeatureTree Expand all placements downwards the FeatureTree @@ -277,12 +237,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Explode Group - + remove fusion, apply placement to children and color randomly remove fusion, apply placement to children and color randomly @@ -290,12 +250,12 @@ OpenSCAD_Hull - + Hull Hull - + Perform Hull Perform Hull @@ -303,12 +263,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Increase Tolerance Feature - + Create Feature that allows to increase the tolerance Create Feature that allows to increase the tolerance @@ -316,12 +276,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Mesh Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation. Export objects as meshes and use OpenSCAD to perform a boolean operation. @@ -329,12 +289,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Perform Minkowski @@ -342,12 +302,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Refine Shape Feature - + Create Refine Shape Feature Create Refine Shape Feature @@ -355,12 +315,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Remove Objects and their Children - + Removes the selected objects and all children that are not referenced from other objects Removes the selected objects and all children that are not referenced from other objects @@ -368,14 +328,30 @@ OpenSCAD_ReplaceObject - + Replace Object Replace Object - + Replace an object in the Feature Tree. Please select old, new and parent object Replace an object in the Feature Tree. Please select old, new and parent object + + Workbech + + + OpenSCAD Part tools + OpenSCAD Part tools + + + + Workbench + + + OpenSCADTools + OpenSCADTools + + diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.qm index 9792e64252..91edd9fcff 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.ts index c55c993a60..aff26d5c48 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_cs.ts @@ -28,11 +28,6 @@ OpenSCAD import Import z OpenSCADu - - - If this is checked, Features will claim thier children in the tree view - Pokud je toto políčko zaškrtnuto, budou funkce ve stromovém zobrazení - Use ViewProvider in Tree View @@ -106,136 +101,101 @@ Mesh fallback - Mesh fallback + Nouzová síť - - Maxium Length - Maximální délka - - - - MaxLength - MaxLength - - - - Maximum Length - Maximální délka - - - - Maximum Area - Maximální plocha - - - - maxArea - maxArea - - - - Local Length - Lokální délka - - - - localLen - localLen - - - + Deflection Průhyb - + deflection průhyb - + Triangulation settings Nastavení triangulace + + + If this is checked, Features will claim their children in the tree view + Je-li zaškrtnuto, budou funkce ve stromovém zobrazení + OpenSCAD - + Convert Edges to Faces Převod hran na stěny - + Please select 3 objects first Nejdříve prosím vyberte 3 objekty - + Unsupported Function Nepodporovaná funkce - + Press OK Stiskněte OK - - Projection Not yet Coded waiting for Peter Li - Projekce ještě není naprogramována, čekáme na Petra Li - - - - Press OK - Stiskněte OK - - - + Add Přidat - + Clear Vyčistit - + as Mesh - as Mesh + jako síť - + Add OpenSCAD Element Přidat prvek OpenSCAD - + Perform - Perform + Provést - + Mesh Boolean - Mesh Boolean + Booleovské operace se sítí - + Error all shapes must be either 2D or both must be 3D - Error all shapes must be either 2D or both must be 3D + Chyba, všechny tvary musí být buď 2D nebo 3D + + + + Unable to explode %s + Není možné rozložit %s OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Přidat prvek OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Přidat OpenSCAD element zadáním a spuštěním kódu OpenSCAD @@ -243,20 +203,20 @@ OpenSCAD_ColorCodeShape - + Color Shapes Barva ploch - + Color Shapes by validity and type - Color Shapes by validity and type + Obarvit tvary podle platnosti a typu OpenSCAD_Edgestofaces - + Convert Edges To Faces Převod hran na stěny @@ -264,103 +224,103 @@ OpenSCAD_ExpandPlacements - + Expand Placements - Expand Placements + Rozbalit umístění - + Expand all placements downwards the FeatureTree - Expand all placements downwards the FeatureTree + Rozbalit všechna umístění ve stromě funkcí OpenSCAD_ExplodeGroup - + Explode Group Rozbít skupinu - + remove fusion, apply placement to children and color randomly - remove fusion, apply placement to children and color randomly + Odstranit sloučení, převzít umístění potomků a obarvit náhodně OpenSCAD_Hull - + Hull Hull - + Perform Hull - Perform Hull + Vytvořit skořepinu OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature - Increase Tolerance Feature + Zvýšit toleranci prvku - + Create Feature that allows to increase the tolerance - Create Feature that allows to increase the tolerance + Vytvrořit prvek, který umožňuje zvýšení tolerance OpenSCAD_MeshBoolean - + Mesh Boolean... - Mesh Boolean... + Booleovské operace se sítí... - + Export objects as meshes and use OpenSCAD to perform a boolean operation. - Export objects as meshes and use OpenSCAD to perform a boolean operation. + Exportovat objekty jako síťě a booleovskou operaci provést pomocí OpenSCADu. OpenSCAD_Minkowski - + Minkowski - Minkowski + Minkowského operace - + Perform Minkowski - Perform Minkowski + Provést MInkowského operaci OpenSCAD_RefineShapeFeature - + Refine Shape Feature - Refine Shape Feature + Vyčištění tvarového prvku - + Create Refine Shape Feature - Create Refine Shape Feature + Vytvořit Vyčištění tvarobého prvku OpenSCAD_RemoveSubtree - + Remove Objects and their Children Odstranit objekty a jejich potomky - + Removes the selected objects and all children that are not referenced from other objects Odstranit vybrané objekty a všechny potomky, na které není odkaz z jiných objektů @@ -368,14 +328,30 @@ OpenSCAD_ReplaceObject - + Replace Object Nahradit objekt - + Replace an object in the Feature Tree. Please select old, new and parent object Nahrazení objektu ve stromu funkcí. Vyberte prosím starý, nový a nadřazený objekt + + Workbech + + + OpenSCAD Part tools + Nástroje součástí OpenSCAD + + + + Workbench + + + OpenSCADTools + Nástroje OpenSCAD + + diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.qm index 2dc5bd375c..ff2112cac4 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.ts index 93b4ee3c4f..320d5c4c58 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_de.ts @@ -1,306 +1,357 @@ - + Gui::Dialog::DlgSettingsOpenSCAD General settings - Allgemeine Einstellungen + Allgemeine Einstellungen General OpenSCAD Settings - Allgemeine OpenSCAD Einstellungen + Allgemeine OpenSCAD Einstellungen OpenSCAD executable - OpenSCAD Programmdatei + OpenSCAD Programmdatei The path to the OpenSCAD executeable - Der Pfad zur OpenSCAD Programmdatei + Der Pfad zur OpenSCAD Programmdatei OpenSCAD import - OpenSCAD importieren - - - - If this is checked, Features will claim thier children in the tree view - Wenn diese Option aktiviert ist, werden Features sich ihre Kinder in der Strukturansicht unterordnen + OpenSCAD importieren Use ViewProvider in Tree View - Verwenden von ViewProvider in der Strukturansicht + Verwenden von ViewProvider in der Strukturansicht If this is checked, Multmatrix Object will be Parametric - Wenn diese Option aktiviert ist, werden sich Multmatrix Objekte parametrisch verhalten + Wenn diese Option aktiviert ist, werden sich Multmatrix Objekte parametrisch verhalten Use Multmatrix Feature - Multmatrix-Feature verwenden + Multmatrix-Feature verwenden The maximum number of faces of a polygon, prism or frustum. If fn is greater than this value the object is considered to be a circular. Set to 0 for no limit - Die maximale Anzahl der Kanten von einem Polygon, Prisma oder Prismenstumpf. Wenn fn größer als dieser Wert ist als rund betrachtet. Setzen Sie dies auf 0 für keine Begrenzung + Die maximale Anzahl der Kanten von einem Polygon, Prisma oder Prismenstumpf. Wenn fn größer als dieser Wert ist als rund betrachtet. Setzen Sie dies auf 0 für keine Begrenzung Maximum number of faces for polygons (fn) - Maximale Anzahl der Flächen für Polygone (fn) + Maximale Anzahl der Flächen für Polygone (fn) OpenSCAD export - OpenSCAD Export + OpenSCAD Export maximum fragment size - maximale Fragmentgröße + maximale Fragmentgröße minimum angle for a fragment - minimaler Winkel für ein Fragment + minimaler Winkel für ein Fragment angular (fa) - winkelig (Fa) + winkelig (Fa) - + ° - ° + ° minimum size of a fragment - Mindestgröße eines Fragments + Mindestgröße eines Fragments size (fs) - Größe (fs) + Größe (fs) mm - mm + mm convexity - Konvexität + Konvexität Mesh fallback - Polygonnetz Rückfalllösung + Polygonnetz Rückfalllösung - - Maxium Length - Maximale Länge - - - - MaxLength - MaxLength - - - - Maximum Length - Maximale Länge - - - - Maximum Area - Maximale Fläche - - - - maxArea - maxArea - - - - Local Length - Lokale Länge - - - - localLen - localLen - - - + Deflection - Durchbiegung + Durchbiegung - + deflection - Durchbiegung + Durchbiegung - + Triangulation settings - Triangulationseinstellungen + Triangulationseinstellungen + + + + If this is checked, Features will claim their children in the tree view + Wenn diese Option aktiviert ist, werden Features sich ihre Kinder in der Strukturbaum unterordnen OpenSCAD - + Convert Edges to Faces - Konvertieren von Kanten zu Flächen + Konvertieren von Kanten zu Flächen - + Please select 3 objects first - Bitte wählen Sie zuerst 3 Objekte + Bitte wählen Sie zuerst 3 Objekte - + Unsupported Function - Nicht unterstützte Funktion + Nicht unterstützte Funktion - + Press OK - Drücken Sie OK + Drücken Sie OK - - Projection Not yet Coded waiting for Peter Li - Projektionsfunktion noch nicht programmiert, warte auf Peter Li - - - - Press OK - Bitte OK drücken - - - - Running OpenSCAD failed - Fehler beim Ausführen von OpenSCAD - - - + Add - Hinzufügen + Hinzufügen - + Clear - Löschen + Löschen - + as Mesh - als Polygonnetz + als Polygonnetz - + Add OpenSCAD Element - OpenSCAD Element einfügen + OpenSCAD Element einfügen + + + + Perform + Ausführen + + + + Mesh Boolean + Boolsche Operation als Polygonnetz + + + + Error all shapes must be either 2D or both must be 3D + Fehler. Alle Formen müssen entweder 2D oder 3D sein + + + + Unable to explode %s + Kann %s nicht zerlegen OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... - OpenSCAD Element einfügen... + OpenSCAD Element einfügen... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary - Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary + Füge ein OpenSCAD-Element hinzu, durch Eingabe von OpenSCAD-Code und Ausführen des OpenSCAD Programms OpenSCAD_ColorCodeShape - + Color Shapes - Formen einfärben + Formen einfärben - + Color Shapes by validity and type - Formen nach Gültigkeit und Typ einfärben + Formen nach Gültigkeit und Typ einfärben OpenSCAD_Edgestofaces - + Convert Edges To Faces - Kanten zu Flächen umwandeln + Kanten zu Flächen umwandeln OpenSCAD_ExpandPlacements - + Expand Placements - Expand Placements + Erweitere Platzierungen + + + + Expand all placements downwards the FeatureTree + Erweitere alle Platzierungen nach unten im Feature Baum + + + + OpenSCAD_ExplodeGroup + + + Explode Group + Gruppe auflösen - Expand all placements downwards the FeatureTree - Expand all placements downwards the FeatureTree + remove fusion, apply placement to children and color randomly + Verschmelzung entfernen, Platzierung für Kinder übernehmen und zufällig färben + + + + OpenSCAD_Hull + + + Hull + Rumpf + + + + Perform Hull + Konvexe Hülle berechnen + + + + OpenSCAD_IncreaseToleranceFeature + + + Increase Tolerance Feature + Toleranz erhöhen + + + + Create Feature that allows to increase the tolerance + Erstellen der Funktion, die ermöglicht, die Toleranz zu erhöhen + + + + OpenSCAD_MeshBoolean + + + Mesh Boolean... + Boolsche Operation als Polygonnetz... + + + + Export objects as meshes and use OpenSCAD to perform a boolean operation. + Exportiere Objekte als Polygonnetze und führe eine Boolsche Operation mit OpenSCAD durch. + + + + OpenSCAD_Minkowski + + + Minkowski + Minkowski + + + + Perform Minkowski + Minkowskiprodukt berechnen OpenSCAD_RefineShapeFeature - + Refine Shape Feature - Refine Shape Feature + Form Feature verfeinern - + Create Refine Shape Feature - Create Refine Shape Feature + Erstelle verfeinertes Form Feature OpenSCAD_RemoveSubtree - + Remove Objects and their Children - Remove Objects and their Children + Objekte entfernen samt Kinder - + Removes the selected objects and all children that are not referenced from other objects - Removes the selected objects and all children that are not referenced from other objects + Entfernt die ausgewählten Objekte und alle Kinder, die nicht von anderen Objekten referenziert werden OpenSCAD_ReplaceObject - + Replace Object - Objekt ersetzen + Objekt ersetzen - + Replace an object in the Feature Tree. Please select old, new and parent object - Replace an object in the Feature Tree. Please select old, new and parent object + Ersetze ein Objekt im Feature Baum. Bitte wählen Sie das alte, das neue und das übergeordnete Objekt aus + + + + Workbech + + + OpenSCAD Part tools + OpenSCAD Part-Werkzeuge + + + + Workbench + + + OpenSCADTools + OpenSCADTools diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_es-ES.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_es-ES.qm index 909213090c..3d25b4ca9f 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_es-ES.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_es-ES.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_es-ES.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_es-ES.ts index de07c09312..710d471e34 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_es-ES.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_es-ES.ts @@ -28,11 +28,6 @@ OpenSCAD import Importación OpenSCAD - - - If this is checked, Features will claim thier children in the tree view - Si se selecciona, las Funciones serán demandadas a sus hijos en la vista de árbol - Use ViewProvider in Tree View @@ -109,133 +104,98 @@ Respaldo de malla - - Maxium Length - Longitud Máxima - - - - MaxLength - MaxLongitud - - - - Maximum Length - Longitud máxima - - - - Maximum Area - Área máxima - - - - maxArea - maxÁrea - - - - Local Length - Longitud local - - - - localLen - Lonlocal - - - + Deflection Deflexión - + deflection deflexión - + Triangulation settings Configuración de triangulación + + + If this is checked, Features will claim their children in the tree view + Si se selecciona, las Funciones serán demandadas a sus hijos en la vista de árbol + OpenSCAD - + Convert Edges to Faces Convertir aristas en caras - + Please select 3 objects first Por favor, seleccione tres objetos primero - + Unsupported Function Función no admitida - + Press OK Pulse Aceptar - - Projection Not yet Coded waiting for Peter Li - Proyección aún no programada, esperando a Peter Li - - - - Press OK - Pulse Aceptar - - - + Add Añadir - + Clear Limpiar - + as Mesh como malla - + Add OpenSCAD Element Añadir elemento OpenSCAD - + Perform Realizar - + Mesh Boolean Malla booleana - + Error all shapes must be either 2D or both must be 3D Error, todos los cuerpos han de ser o bien 2D, o bien 3D + + + Unable to explode %s + Incapaz de descomponer %s + OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Añadir elemento OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Agregar un elemento OpenSCAD mediante código OpenSCAD y ejecutar el binario OpenSCAD @@ -243,12 +203,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Color de formas - + Color Shapes by validity and type Color de Forma por validez y tipo @@ -256,7 +216,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Convertir Aristas en Caras @@ -264,12 +224,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Ampliar Colocaciones - + Expand all placements downwards the FeatureTree Expandir todas las colocaciones hacia abajo del Árbol de Funciones @@ -277,12 +237,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Descomponer Grupo - + remove fusion, apply placement to children and color randomly Eliminar unión, aplicar posicionado a los subobjetos y colorear al azar @@ -290,12 +250,12 @@ OpenSCAD_Hull - + Hull Casco - + Perform Hull Realizar casco @@ -303,12 +263,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Aumentar la característica de tolerancia - + Create Feature that allows to increase the tolerance Crear función que permite para aumentar la tolerancia @@ -316,12 +276,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Malla booleana... - + Export objects as meshes and use OpenSCAD to perform a boolean operation. Exportar objetos como mallas y utilizar OpenSCAD para ejecutar una operación booleana. @@ -329,12 +289,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Realizar Minkowski @@ -342,12 +302,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Función Refinar Forma - + Create Refine Shape Feature Función Crear Forma Refinada @@ -355,12 +315,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Eliminar objetos y sus hijos - + Removes the selected objects and all children that are not referenced from other objects Elimina los objetos seleccionados y todos los hijos que no hagan referencia a otros objetos @@ -368,14 +328,30 @@ OpenSCAD_ReplaceObject - + Replace Object Reemplazar objeto - + Replace an object in the Feature Tree. Please select old, new and parent object Reemplazar un objeto en el Árbol de Funciones. Por favor seleccione antiguo, nuevo y objeto primario + + Workbech + + + OpenSCAD Part tools + Herramientas OpenSCAD parte + + + + Workbench + + + OpenSCADTools + Herramientas OpenSCAD + + diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fi.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fi.qm index 1b6d3fa0c7..31b8154d57 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fi.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fi.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fi.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fi.ts index 3a54031630..4df2c150be 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fi.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fi.ts @@ -21,18 +21,13 @@ The path to the OpenSCAD executeable - Polku OpenSCAD ajettavaan tiedostoon + Polku OpenSCADilla ajettavaan tiedostoon OpenSCAD import OpenSCAD tuonti - - - If this is checked, Features will claim thier children in the tree view - Tämän ollessa valittuna ominaisuudet liittävät jälkeläisensä puunäkymään - Use ViewProvider in Tree View @@ -109,133 +104,98 @@ Ongelmatilanteessa luo verkkopinta - - Maxium Length - Enimmäispituus - - - - MaxLength - MaxLength - - - - Maximum Length - Enimmäispituus - - - - Maximum Area - Enimmäispinta-ala - - - - maxArea - maxArea - - - - Local Length - Paikallinen pituus - - - - localLen - localLen - - - + Deflection Taipuma - + deflection taipuma - + Triangulation settings Kolmiomittausasetukset + + + If this is checked, Features will claim their children in the tree view + Tämän ollessa valittuna ominaisuudet liittävät jälkeläisensä puunäkymään + OpenSCAD - + Convert Edges to Faces Muunna reunat tahkoiksi - + Please select 3 objects first Valitse 3 objektia ensin - + Unsupported Function Toiminto jota ei tueta - + Press OK Paina OK - - Projection Not yet Coded waiting for Peter Li - Projektiota ei ole vielä tehty (odottaa Peter Li ohjelmointitaitoja) - - - - Press OK - Paina OK - - - + Add Lisää - + Clear Tyhjennä - + as Mesh pintaverkkona - + Add OpenSCAD Element Lisää OpenSCAD-elementti - + Perform - Perform + Suorita - + Mesh Boolean - Mesh Boolean + verkkopinta Boolean - + Error all shapes must be either 2D or both must be 3D - Error all shapes must be either 2D or both must be 3D + Virhe: kaikki muodot on oltava joko 2D tai molemmat oltava 3D + + + + Unable to explode %s + Ei onnistuta räjäyttämään auki %s OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Lisää OpenSCAD-elementti... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Lisää OpenSCAD-elementti syöttämällä OpenSCAD koodi ja suorittamalla OpenSCAD binääri @@ -243,12 +203,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Väritä muodot - + Color Shapes by validity and type Väritä muotoja riippuen tyypistä ja käypyydestä @@ -256,7 +216,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Muunna reunat tahkoiksi @@ -264,12 +224,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Laajenna Sijoitteluja - + Expand all placements downwards the FeatureTree Laajenna sijoitteluja ominaisuuspuussa alaspäin @@ -277,77 +237,77 @@ OpenSCAD_ExplodeGroup - + Explode Group - Explode Group + Räjäytä ryhmä - + remove fusion, apply placement to children and color randomly - remove fusion, apply placement to children and color randomly + poista liitos, liitä sijoitus jälkeläisiin ja väriin satunnaisesti OpenSCAD_Hull - + Hull - Hull + Runko - + Perform Hull - Perform Hull + Tee runko OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature - Increase Tolerance Feature + Lisää sallittu poikkeama -ominaisuutta - + Create Feature that allows to increase the tolerance - Create Feature that allows to increase the tolerance + Luo ominaisuus, jonka avulla voit lisätä sallittua poikkeamaa OpenSCAD_MeshBoolean - + Mesh Boolean... - Mesh Boolean... + verkkopinta Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation. - Export objects as meshes and use OpenSCAD to perform a boolean operation. + Vie kohteet verkkopintoina ja käytä OpenSCAD Boolean toimintoa suorittamiseen. OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski - Perform Minkowski + Suorita Minkowski OpenSCAD_RefineShapeFeature - + Refine Shape Feature Tarkenna muoto ominaisuutta - + Create Refine Shape Feature Luo tarkenna muoto ominaisuutta @@ -355,12 +315,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Poista objektit ja niiden jälkeläiset - + Removes the selected objects and all children that are not referenced from other objects Poistaa valitut objektit ja kaikki niiden jälkeläiset joihin ei viitata muista objekteista @@ -368,14 +328,30 @@ OpenSCAD_ReplaceObject - + Replace Object Korvaa objekti - + Replace an object in the Feature Tree. Please select old, new and parent object Korvaa objekti ominaisuuspuussa. Valitse vanha, uusi ja isäobjekti + + Workbech + + + OpenSCAD Part tools + OpenSCAD osan työkalut + + + + Workbench + + + OpenSCADTools + OpenSCADTyökalut + + diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.qm index e61f7d012b..6d77f5d5f7 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.ts index 782f22d734..fe315fd8e5 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_fr.ts @@ -28,11 +28,6 @@ OpenSCAD import importation OpenSCAD - - - If this is checked, Features will claim thier children in the tree view - Si cette case est cochée, les objets revendiqueront leurs enfants dans l'arborescence - Use ViewProvider in Tree View @@ -109,133 +104,98 @@ Maillage de secours - - Maxium Length - Longueur maximale - - - - MaxLength - MaxLength - - - - Maximum Length - Longueur maximale - - - - Maximum Area - Superficie maximale - - - - maxArea - maxArea - - - - Local Length - Longueur locale - - - - localLen - localLen - - - + Deflection Déflexion - + deflection déflexion - + Triangulation settings Paramètres de triangulation + + + If this is checked, Features will claim their children in the tree view + Si cette case est cochée, les objets revendiqueront leurs enfants dans l'arborescence + OpenSCAD - + Convert Edges to Faces Convertir les arêtes en faces - + Please select 3 objects first Veuillez d'abord sélectionner 3 objets - + Unsupported Function Fonction non supportée - + Press OK Appuyez sur OK - - Projection Not yet Coded waiting for Peter Li - Projection (pas encore codé, en attente de Peter Li) - - - - Press OK - Appuyez sur OK - - - + Add Ajouter - + Clear Effacer - + as Mesh comme Maillage - + Add OpenSCAD Element Ajouter un élément OpenSCAD - + Perform Effectuer - + Mesh Boolean - Maillage Booléen + Opération booléenne avec maillage - + Error all shapes must be either 2D or both must be 3D - Erreur toutes les formes doivent être soit 2D soit 3D + Erreur les formes doivent être soit toutes 3D, soit toutes 2D + + + + Unable to explode %s + Impossible d'exploser %s OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Ajouter un élément OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Ajouter un élément OpenSCAD par la saisie de code OpenSCAD et l'exécution du binaire OpenSCAD @@ -243,12 +203,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Colorer les formes - + Color Shapes by validity and type Colorer les formes par la validité et le type @@ -256,7 +216,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Convertir les arêtes en faces @@ -264,12 +224,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Développer les placements - + Expand all placements downwards the FeatureTree Développer tous les placements vers le bas dans l'arborescence @@ -277,25 +237,25 @@ OpenSCAD_ExplodeGroup - + Explode Group - Exploser le groupe + Dégrouper - + remove fusion, apply placement to children and color randomly - supprimer la fusion, générer les positions des enfants et des couleurs au hasard + supprimer la fusion, appliquer le placement des enfants et des couleurs au hasard OpenSCAD_Hull - + Hull Enveloppe - + Perform Hull Effectuer l'enveloppe convexe @@ -303,12 +263,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Augmenter la tolérance - + Create Feature that allows to increase the tolerance Créez une fonction qui permet d'augmenter la tolérance @@ -316,38 +276,38 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... - Maillage Booléen... + Opération booléenne avec Maillage... - + Export objects as meshes and use OpenSCAD to perform a boolean operation. - Exporter des objets comme maillages et utiliser OpenSCAD pour effectuer une opération booléenne. + Exporter les objets sous forme de maillage et utiliser OpenSCAD pour effectuer une opération booléenne. OpenSCAD_Minkowski - + Minkowski - Minkowski + Somme de Minkowski - + Perform Minkowski - Effectuer une somme de Minkowski + Appliquer une Somme de Minkowski OpenSCAD_RefineShapeFeature - + Refine Shape Feature Fonction d'affinage de la forme - + Create Refine Shape Feature Créer une fonction d'affinage de la forme @@ -355,12 +315,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Supprimer les objets et leurs enfants - + Removes the selected objects and all children that are not referenced from other objects Supprime les objets sélectionnés et tous les enfants qui ne sont pas référencés par d'autres objets @@ -368,14 +328,30 @@ OpenSCAD_ReplaceObject - + Replace Object Remplacer l'objet - + Replace an object in the Feature Tree. Please select old, new and parent object Remplacer un objet dans l'arborescence. Veuillez sélectionnez l'ancien objet, le nouveau et l'objet parent + + Workbech + + + OpenSCAD Part tools + Outils de pièces OpenSCAD + + + + Workbench + + + OpenSCADTools + Outils OpenSCAD + + diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hr.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hr.qm index c191d0cac4..1afd641915 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hr.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hr.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hr.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hr.ts index 8158205766..fa8ca4a162 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hr.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hr.ts @@ -28,11 +28,6 @@ OpenSCAD import OpenSCAD uvoz - - - If this is checked, Features will claim thier children in the tree view - Ako je označeno, svojstva će sadržavati njihove potomke u prikazu stabla - Use ViewProvider in Tree View @@ -109,133 +104,98 @@ Mesh rezervni plan - - Maxium Length - Maksimalna duljina - - - - MaxLength - MaxDuljina - - - - Maximum Length - Maksimalna duljina - - - - Maximum Area - Maksimalna površina - - - - maxArea - maxPovršina - - - - Local Length - Lokalna duljina - - - - localLen - lokDuljina - - - + Deflection Defleksija - + deflection defleksija - + Triangulation settings Opcije stvaranja Mesh-a + + + If this is checked, Features will claim their children in the tree view + If this is checked, Features will claim their children in the tree view + OpenSCAD - + Convert Edges to Faces Pretvori rubove u površine - + Please select 3 objects first Molim odaberite tri oblika - + Unsupported Function Nepodržana funkcija - + Press OK Pritisnite OK - - Projection Not yet Coded waiting for Peter Li - Projekcija nije još iskodirana čeka se Peter Li - - - - Press OK - Pritisnite OK - - - + Add Dodaj - + Clear Brisanje - + as Mesh kao Mesh - + Add OpenSCAD Element Dodaj OpenSCAD Element - + Perform Perform - + Mesh Boolean Mesh Boolean - + Error all shapes must be either 2D or both must be 3D Error all shapes must be either 2D or both must be 3D + + + Unable to explode %s + Unable to explode %s + OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Dodaj OpenSCAD Element... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Dodaj OpenSCAD element unošenjem OpenSCAD koda i pokretanjem OpenSCAD binarne datoteke @@ -243,12 +203,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Oboji oblike - + Color Shapes by validity and type Oboji oblike po tipu i valjanosti @@ -256,7 +216,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Pretvori rubove u površine @@ -264,12 +224,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Proširi postavljanja - + Expand all placements downwards the FeatureTree Proširi sva postavljanja niže u stablu svojstava @@ -277,12 +237,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Explode Group - + remove fusion, apply placement to children and color randomly remove fusion, apply placement to children and color randomly @@ -290,12 +250,12 @@ OpenSCAD_Hull - + Hull Hull - + Perform Hull Perform Hull @@ -303,12 +263,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Increase Tolerance Feature - + Create Feature that allows to increase the tolerance Create Feature that allows to increase the tolerance @@ -316,12 +276,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Mesh Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation. Export objects as meshes and use OpenSCAD to perform a boolean operation. @@ -329,12 +289,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Perform Minkowski @@ -342,12 +302,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Izgladi oblik svojstvo - + Create Refine Shape Feature Kreiraj "Izgladi Oblik" svojstvo @@ -355,12 +315,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Izbriši objekte i njihove potomke - + Removes the selected objects and all children that are not referenced from other objects Briše odabrani objekt i svu djecu koja nisu referencirana od ostalih objekata @@ -368,14 +328,30 @@ OpenSCAD_ReplaceObject - + Replace Object Zamjeni objekt - + Replace an object in the Feature Tree. Please select old, new and parent object Zamjeni objekt u stablu. Odaberite stari objekt, novi i roditelja + + Workbech + + + OpenSCAD Part tools + OpenSCAD Part tools + + + + Workbench + + + OpenSCADTools + OpenSCADTools + + diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.qm index f543a6bf2d..3d666a3c2b 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.ts index e435d63b40..b24530c03d 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_hu.ts @@ -28,11 +28,6 @@ OpenSCAD import OpenSCAD import - - - If this is checked, Features will claim thier children in the tree view - Ha be van állítva akkor, a tulajdonságok igénylik az alegységeiket a fa nézetben - Use ViewProvider in Tree View @@ -109,133 +104,98 @@ Háló visszamaradás - - Maxium Length - Maximum Hossz - - - - MaxLength - MaxHossz - - - - Maximum Length - Maximális Hosszúság - - - - Maximum Area - Maximum Terület - - - - maxArea - maxTerület - - - - Local Length - Helyi Hosszúság - - - - localLen - HelyiHossz - - - + Deflection Kiöblösödés - + deflection kiöblösödés - + Triangulation settings Háromszögelési beállítások + + + If this is checked, Features will claim their children in the tree view + If this is checked, Features will claim their children in the tree view + OpenSCAD - + Convert Edges to Faces Élek felületté konvertálása - + Please select 3 objects first Kérem válasszon ki előszőr 3 tárgyat - + Unsupported Function Nem támogatott funkció - + Press OK OK-ra kattintson - - Projection Not yet Coded waiting for Peter Li - Vetítés még nincs kódolva, várjuk Pete Li-t - - - - Press OK - OK-ra kattintson - - - + Add Hozzáad - + Clear Törlés - + as Mesh a háló - + Add OpenSCAD Element OpenSCAD elem hozzáadása - + Perform Perform - + Mesh Boolean Mesh Boolean - + Error all shapes must be either 2D or both must be 3D Error all shapes must be either 2D or both must be 3D + + + Unable to explode %s + Unable to explode %s + OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... OpenSCAD elem hozzáadása... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Adjunk hozzá egy OpenSCAD elemet egy OpenSCAD kód hozzáadásával és hajtsa végre az OpenSCAD binárist @@ -243,12 +203,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Alakzatok színezése - + Color Shapes by validity and type Alakzatok színezése az érvényesség és típus szerint @@ -256,7 +216,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Élek konvertálása felületekké @@ -264,12 +224,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Bontsa ki az elhelyezések - + Expand all placements downwards the FeatureTree Bontsa ki az összes elhelyezést lefelé a TulajdonságFában @@ -277,12 +237,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Explode Group - + remove fusion, apply placement to children and color randomly remove fusion, apply placement to children and color randomly @@ -290,12 +250,12 @@ OpenSCAD_Hull - + Hull Hull - + Perform Hull Perform Hull @@ -303,12 +263,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Increase Tolerance Feature - + Create Feature that allows to increase the tolerance Create Feature that allows to increase the tolerance @@ -316,12 +276,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Mesh Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation. Export objects as meshes and use OpenSCAD to perform a boolean operation. @@ -329,12 +289,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Perform Minkowski @@ -342,12 +302,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Alakzat tulajdonság finomítása - + Create Refine Shape Feature Alakzat tulajdonság finomítás létrehozása @@ -355,12 +315,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Objektum és az összes al objektuma eltávolítása - + Removes the selected objects and all children that are not referenced from other objects Eltávolítja a kijelölt objektumokat és minden al objektumár, melyek nem hivatkoznak más objektumokra @@ -368,14 +328,30 @@ OpenSCAD_ReplaceObject - + Replace Object Cserélje ki az objektumot - + Replace an object in the Feature Tree. Please select old, new and parent object Visszahelyez egy objektumot a tulajdonság fában. Kérjük, válasszon régi, új, és a szülő objektumot + + Workbech + + + OpenSCAD Part tools + OpenSCAD Part tools + + + + Workbench + + + OpenSCADTools + OpenSCADTools + + diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.qm index c9053e5adf..9daa5b13c6 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.ts index e0a7958597..64f5c56203 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_it.ts @@ -28,11 +28,6 @@ OpenSCAD import Importa OpenSCAD - - - If this is checked, Features will claim thier children in the tree view - Se questa opzione è selezionata, le Feature sosterranno i loro figli nella visualizzazione struttura - Use ViewProvider in Tree View @@ -109,133 +104,98 @@ Rete di riserva - - Maxium Length - Lunghezza massima - - - - MaxLength - MaxLength - - - - Maximum Length - Lunghezza massima - - - - Maximum Area - Area massima - - - - maxArea - maxArea - - - - Local Length - Lunghezza locale - - - - localLen - localLen - - - + Deflection Deflessione - + deflection deflessione - + Triangulation settings Impostazioni di triangolazione + + + If this is checked, Features will claim their children in the tree view + Se questa opzione è selezionata, le Feature sostengono i loro figli nella nella vista ad albero + OpenSCAD - + Convert Edges to Faces Converti i bordi di facce - + Please select 3 objects first Seleziona prima 3 oggetti - + Unsupported Function Funzione non supportata - + Press OK Premere OK - - Projection Not yet Coded waiting for Peter Li - Proiezione non ancora codificata in attesa di Peter Li - - - - Press OK - Premere OK - - - + Add Aggiungi - + Clear Pulisci - + as Mesh come Mesh - + Add OpenSCAD Element Aggiungi un elemento OpenSCAD - + Perform Esegui - + Mesh Boolean - Mesh Booleana + Booleana su Mesh - + Error all shapes must be either 2D or both must be 3D - Errore. Tutte le forme devono essere 2D o 3D + Errore.Le forme devono essere tutte 2D o tutte 3D + + + + Unable to explode %s + Impossibile scomporre %s OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Aggiungi un elemento OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Aggiunge un elemento OpenSCAD inserendo il codice OpenSCAD ed eseguendo il binario di OpenSCAD @@ -243,12 +203,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Forme di colore - + Color Shapes by validity and type Forme di colore per validità e tipo @@ -256,7 +216,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Converti i bordi di facce @@ -264,12 +224,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Espandi posizionamenti - + Expand all placements downwards the FeatureTree Espande tutti i posizionamenti sotto la struttura Feature @@ -277,38 +237,38 @@ OpenSCAD_ExplodeGroup - + Explode Group - Esplodi gruppo + Scompone il gruppo - + remove fusion, apply placement to children and color randomly - rimuove la fusione, applica il posizionamento per figli e il colore in modo casuale + rimuove la fusione, applica in modo casuale il posizionamento ai figli e il colore OpenSCAD_Hull - + Hull Guscio - + Perform Hull - Esegui guscio + Esegui scafo OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature - Aumenta funzione di tolleranza + Aumentare la tolleranza caratteristica - + Create Feature that allows to increase the tolerance Crea la funzione che permette di aumentare la tolleranza @@ -316,12 +276,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Mesh Booleana... - + Export objects as meshes and use OpenSCAD to perform a boolean operation. Esporta gli oggetti come mesh e utilizza OpenSCAD per eseguire un'operazione booleana. @@ -329,12 +289,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Esegui Minkowski @@ -342,12 +302,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Feature di rifinitura forma - + Create Refine Shape Feature Crea una feauter di rifinitura forma @@ -355,12 +315,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Rimuovere gli oggetti e i loro figli - + Removes the selected objects and all children that are not referenced from other objects Rimuove gli oggetti selezionati e tutti i figli che non sono riferiti ad altri oggetti @@ -368,14 +328,30 @@ OpenSCAD_ReplaceObject - + Replace Object Sostituisci oggetti - + Replace an object in the Feature Tree. Please select old, new and parent object Sostituisce un oggetto nella struttura Feature. Si prega di selezionare il vecchio, il nuovo e l'oggetto padre + + Workbech + + + OpenSCAD Part tools + OpenSCAD Part strumenti + + + + Workbench + + + OpenSCADTools + OpenSCADTools + + diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ja.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ja.qm index d396e6628d..ec6c53296d 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ja.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ja.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ja.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ja.ts index a8ed6843a3..b44d0cd1f7 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ja.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ja.ts @@ -28,11 +28,6 @@ OpenSCAD import OpenSCADのインポート - - - If this is checked, Features will claim thier children in the tree view - チェックされている場合、ツリービューでフィーチャーが子を持ちます - Use ViewProvider in Tree View @@ -109,133 +104,98 @@ メッシュフォールバック - - Maxium Length - 最大長 - - - - MaxLength - 最大長 - - - - Maximum Length - 最大長 - - - - Maximum Area - 最大面積 - - - - maxArea - 最大面積 - - - - Local Length - ローカル長さ - - - - localLen - ローカル長さ - - - + Deflection 偏差 - + deflection 偏差 - + Triangulation settings 三角形分割設定 + + + If this is checked, Features will claim their children in the tree view + If this is checked, Features will claim their children in the tree view + OpenSCAD - + Convert Edges to Faces エッジを面に変換 - + Please select 3 objects first まず最初にオブジェクトを3つ選択してください - + Unsupported Function サポートされていない関数です - + Press OK OKを押してください - - Projection Not yet Coded waiting for Peter Li - 投影はまだ実装されていません。Peter Liによる実装を待ってください。 - - - - Press OK - OKを押してください - - - + Add 追加 - + Clear クリア - + as Mesh メッシュとして - + Add OpenSCAD Element OpenSCAD 要素を追加 - + Perform - 演算 + Perform - + Mesh Boolean - Mesh Boolean + メッシュのブール演算 - + Error all shapes must be either 2D or both must be 3D Error all shapes must be either 2D or both must be 3D + + + Unable to explode %s + Unable to explode %s + OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... OpenSCAD 要素を追加 - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary OpenSCADコードを入力してOpenSCADバイナリを実行することでOpenSCAD要素を追加します @@ -243,12 +203,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes カラー形状 - + Color Shapes by validity and type 有効性とタイプによるカラー形状 @@ -256,7 +216,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces エッジを面に変換 @@ -264,12 +224,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements 配置を展開 - + Expand all placements downwards the FeatureTree フィーチャーツリー下のすべての配置を展開 @@ -277,12 +237,12 @@ OpenSCAD_ExplodeGroup - + Explode Group - Explode Group + グループを分解 - + remove fusion, apply placement to children and color randomly remove fusion, apply placement to children and color randomly @@ -290,12 +250,12 @@ OpenSCAD_Hull - + Hull - Hull + 凸包 - + Perform Hull Perform Hull @@ -303,12 +263,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Increase Tolerance Feature - + Create Feature that allows to increase the tolerance Create Feature that allows to increase the tolerance @@ -316,12 +276,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Mesh Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation. Export objects as meshes and use OpenSCAD to perform a boolean operation. @@ -329,25 +289,25 @@ OpenSCAD_Minkowski - + Minkowski ミンコフスキー - + Perform Minkowski - ミンコフスキーを演算 + Perform Minkowski OpenSCAD_RefineShapeFeature - + Refine Shape Feature リファインシェイプフィーチャー - + Create Refine Shape Feature リファインシェイプフィーチャーを作成 @@ -355,12 +315,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children オブジェクトとその子オブジェクトを削除 - + Removes the selected objects and all children that are not referenced from other objects 選択されているオブジェクトと他のオブジェクトから参照されていないその子オブジェクトを全て削除 @@ -368,14 +328,30 @@ OpenSCAD_ReplaceObject - + Replace Object オブジェクトの置換 - + Replace an object in the Feature Tree. Please select old, new and parent object フィーチャーツリー内のオブジェクトを置き換えます、新旧の親オブジェクトを選択してください。 + + Workbech + + + OpenSCAD Part tools + OpenSCAD Part tools + + + + Workbench + + + OpenSCADTools + OpenSCADTools + + diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_nl.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_nl.qm index 97a0c6b8a4..e84405e016 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_nl.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_nl.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_nl.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_nl.ts index 30bc9f0a92..07a8bbd31d 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_nl.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_nl.ts @@ -28,11 +28,6 @@ OpenSCAD import OpenSCAD import - - - If this is checked, Features will claim thier children in the tree view - If this is checked, Features will claim thier children in the tree view - Use ViewProvider in Tree View @@ -109,133 +104,98 @@ Mesh fallback - - Maxium Length - Maximumlengte - - - - MaxLength - MaxLengte - - - - Maximum Length - Maximale lengte - - - - Maximum Area - Maximale oppervlakte - - - - maxArea - maxArea - - - - Local Length - Local Length - - - - localLen - localLen - - - + Deflection Deflectie - + deflection deflectie - + Triangulation settings Triangulation settings + + + If this is checked, Features will claim their children in the tree view + If this is checked, Features will claim their children in the tree view + OpenSCAD - + Convert Edges to Faces Randen omzetten naar vlakken - + Please select 3 objects first Selecteer eerst 3 objecten - + Unsupported Function Niet-ondersteunde functie - + Press OK Druk op OK - - Projection Not yet Coded waiting for Peter Li - Projection Not yet Coded waiting for Peter Li - - - - Press OK - Druk op OK - - - + Add Toevoegen - + Clear Wissen - + as Mesh als gaas - + Add OpenSCAD Element Een OpenSCAD element toevoegen - + Perform Perform - + Mesh Boolean Mesh Boolean - + Error all shapes must be either 2D or both must be 3D Error all shapes must be either 2D or both must be 3D + + + Unable to explode %s + Unable to explode %s + OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... OpenSCAD element toevoegen... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary @@ -243,12 +203,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Vormen inkleuren - + Color Shapes by validity and type Color Shapes by validity and type @@ -256,7 +216,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Randen omzetten naar vlakken @@ -264,12 +224,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Expand Placements - + Expand all placements downwards the FeatureTree Expand all placements downwards the FeatureTree @@ -277,12 +237,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Explode Group - + remove fusion, apply placement to children and color randomly remove fusion, apply placement to children and color randomly @@ -290,12 +250,12 @@ OpenSCAD_Hull - + Hull - Hull + Romp - + Perform Hull Perform Hull @@ -303,12 +263,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Increase Tolerance Feature - + Create Feature that allows to increase the tolerance Create Feature that allows to increase the tolerance @@ -316,12 +276,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Mesh Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation. Export objects as meshes and use OpenSCAD to perform a boolean operation. @@ -329,12 +289,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Perform Minkowski @@ -342,12 +302,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Refine Shape Feature - + Create Refine Shape Feature Create Refine Shape Feature @@ -355,12 +315,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Objecten en hun kinderen verwijderen - + Removes the selected objects and all children that are not referenced from other objects Removes the selected objects and all children that are not referenced from other objects @@ -368,14 +328,30 @@ OpenSCAD_ReplaceObject - + Replace Object Voorwerp vervangen - + Replace an object in the Feature Tree. Please select old, new and parent object Replace an object in the Feature Tree. Please select old, new and parent object + + Workbech + + + OpenSCAD Part tools + OpenSCAD Part tools + + + + Workbench + + + OpenSCADTools + OpenSCADTools + + diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_no.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_no.qm index 19c7966aa4..4a6e19365e 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_no.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_no.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_no.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_no.ts index 27fbddf3a7..22f47b4205 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_no.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_no.ts @@ -28,11 +28,6 @@ OpenSCAD import OpenSCAD import - - - If this is checked, Features will claim thier children in the tree view - If this is checked, Features will claim thier children in the tree view - Use ViewProvider in Tree View @@ -109,146 +104,111 @@ Mesh fallback - - Maxium Length - Maxium Length - - - - MaxLength - MaxLength - - - - Maximum Length - Maximum Length - - - - Maximum Area - Maximum Area - - - - maxArea - maxArea - - - - Local Length - Local Length - - - - localLen - localLen - - - + Deflection Deflection - + deflection deflection - + Triangulation settings Triangulation settings + + + If this is checked, Features will claim their children in the tree view + If this is checked, Features will claim their children in the tree view + OpenSCAD - + Convert Edges to Faces Convert Edges to Faces - + Please select 3 objects first Please select 3 objects first - + Unsupported Function Unsupported Function - + Press OK Press OK - - Projection Not yet Coded waiting for Peter Li - Projection Not yet Coded waiting for Peter Li - - - - Press OK - Press OK - - - + Add Legg til - + Clear Tøm - + as Mesh as Mesh - + Add OpenSCAD Element - Add OpenSCAD Element + Legg til OpenSCAD Element - + Perform Perform - + Mesh Boolean Mesh Boolean - + Error all shapes must be either 2D or both must be 3D Error all shapes must be either 2D or both must be 3D + + + Unable to explode %s + Unable to explode %s + OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... - Add OpenSCAD Element... + Legg til OpenSCAD Element... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary - Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary + Legg til et OpenSCAD-element ved å angi OpenSCAD kode og utføre OpenSCAD fil OpenSCAD_ColorCodeShape - + Color Shapes Color Shapes - + Color Shapes by validity and type Color Shapes by validity and type @@ -256,7 +216,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Convert Edges To Faces @@ -264,12 +224,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Expand Placements - + Expand all placements downwards the FeatureTree Expand all placements downwards the FeatureTree @@ -277,12 +237,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Explode Group - + remove fusion, apply placement to children and color randomly remove fusion, apply placement to children and color randomly @@ -290,12 +250,12 @@ OpenSCAD_Hull - + Hull - Hull + Skrog - + Perform Hull Perform Hull @@ -303,12 +263,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Increase Tolerance Feature - + Create Feature that allows to increase the tolerance Create Feature that allows to increase the tolerance @@ -316,12 +276,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Mesh Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation. Export objects as meshes and use OpenSCAD to perform a boolean operation. @@ -329,12 +289,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Perform Minkowski @@ -342,12 +302,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Refine Shape Feature - + Create Refine Shape Feature Create Refine Shape Feature @@ -355,12 +315,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Remove Objects and their Children - + Removes the selected objects and all children that are not referenced from other objects Removes the selected objects and all children that are not referenced from other objects @@ -368,14 +328,30 @@ OpenSCAD_ReplaceObject - + Replace Object Replace Object - + Replace an object in the Feature Tree. Please select old, new and parent object Replace an object in the Feature Tree. Please select old, new and parent object + + Workbech + + + OpenSCAD Part tools + OpenSCAD Part tools + + + + Workbench + + + OpenSCADTools + OpenSCADTools + + diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.qm index afa593ed21..f79956693e 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts index 4e94bf405e..d62c4e5771 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts @@ -28,11 +28,6 @@ OpenSCAD import Importuj z OpenSCAD - - - If this is checked, Features will claim thier children in the tree view - Jeżeli zaznaczono te opcję, funkcje będą wymagać swoich potomków w widoku drzewa - Use ViewProvider in Tree View @@ -109,133 +104,98 @@ Siatki wycofane - - Maxium Length - Maksymalna długość - - - - MaxLength - MaxDługość - - - - Maximum Length - Maksymalna długość - - - - Maximum Area - Maksymalny obszar - - - - maxArea - MaxObszar - - - - Local Length - Długość lokalna - - - - localLen - localLen - - - + Deflection Odkształcenie - + deflection odkształcenie - + Triangulation settings Ustawienia triangulacji + + + If this is checked, Features will claim their children in the tree view + If this is checked, Features will claim their children in the tree view + OpenSCAD - + Convert Edges to Faces Konwersja krawędzi do lic - + Please select 3 objects first Proszę wybrać najpierw 3 obiekty - + Unsupported Function Funkcja nieobsługiwana - + Press OK Naciśnij przycisk OK - - Projection Not yet Coded waiting for Peter Li - Odwzorowanie jeszcze nie zaprojektowane, oczekiwanie na Peter'a Li - - - - Press OK - Naciśnij przycisk OK - - - + Add Dodaj - + Clear Wyczyść - + as Mesh jako Siatka (Mesh) - + Add OpenSCAD Element Dodaj element OpenSCAD - + Perform Perform - + Mesh Boolean Mesh Boolean - + Error all shapes must be either 2D or both must be 3D Error all shapes must be either 2D or both must be 3D + + + Unable to explode %s + Unable to explode %s + OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Dodaj element OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Dodaj element OpenSCAD wprowadzając i wykonując jego kod @@ -243,12 +203,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Kolor kształtów - + Color Shapes by validity and type Kolor kształtów poprzez ważność i typ @@ -256,7 +216,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Konwersja krawędzi do obszarów @@ -264,12 +224,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Rozwiń położenia - + Expand all placements downwards the FeatureTree Rozwiń wszystkie miejsca docelowe w dół drzewa funkcji @@ -277,12 +237,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Explode Group - + remove fusion, apply placement to children and color randomly remove fusion, apply placement to children and color randomly @@ -290,12 +250,12 @@ OpenSCAD_Hull - + Hull - Hull + Powłoka - + Perform Hull Perform Hull @@ -303,12 +263,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Increase Tolerance Feature - + Create Feature that allows to increase the tolerance Create Feature that allows to increase the tolerance @@ -316,12 +276,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Mesh Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation. Export objects as meshes and use OpenSCAD to perform a boolean operation. @@ -329,12 +289,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Perform Minkowski @@ -342,12 +302,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Udoskonalenie funkcji kształtu - + Create Refine Shape Feature Stwórz udoskonaloną funkcje kształtu @@ -355,12 +315,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Usuń obiekt wraz z jego potomkami - + Removes the selected objects and all children that are not referenced from other objects Usuwa wybrane obiekty wraz ze wszystkimi potomkami, do których nie odnoszą się inne obiekty @@ -368,14 +328,30 @@ OpenSCAD_ReplaceObject - + Replace Object Zamień obiekt - + Replace an object in the Feature Tree. Please select old, new and parent object Zamień obiekt w drzewie funkcji. Wybierz obiekt - stary, nowy i nadrzędny + + Workbech + + + OpenSCAD Part tools + OpenSCAD Part tools + + + + Workbench + + + OpenSCADTools + OpenSCADTools + + diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.qm index 054e0f3868..64242881ad 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.ts index 5b8d03b56b..70e8065132 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.ts @@ -28,11 +28,6 @@ OpenSCAD import importação OpenSCAD - - - If this is checked, Features will claim thier children in the tree view - Se esta for marcada, objetos vão agrupar seus descendentes na árvore - Use ViewProvider in Tree View @@ -109,133 +104,98 @@ Malha de socorro - - Maxium Length - Comprimento máximo - - - - MaxLength - MaxLength - - - - Maximum Length - Comprimento máximo - - - - Maximum Area - Área máxima - - - - maxArea - maxArea - - - - Local Length - Comprimento local - - - - localLen - localLen - - - + Deflection Deflexão - + deflection deflexão - + Triangulation settings Configurações de triangulação + + + If this is checked, Features will claim their children in the tree view + Se esta for marcada, objetos vão agrupar seus descendentes na árvore + OpenSCAD - + Convert Edges to Faces Converter arestas em faces - + Please select 3 objects first Por favor, selecione 3 objetos - + Unsupported Function Função não suportada - + Press OK Pressione OK - - Projection Not yet Coded waiting for Peter Li - Projeção ainda não codificada, esperando por Peter Li - - - - Press OK - Pressione OK - - - + Add Adicionar - + Clear Limpar - + as Mesh como malha - + Add OpenSCAD Element Adicionar um elemento OpenSCAD - + Perform Executar - + Mesh Boolean - Booleana de malha + Booliana de malha - + Error all shapes must be either 2D or both must be 3D Erro: todas as formas devem ser 2D ou todas devem ser 3D + + + Unable to explode %s + Não é possível explodir %s + OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Adicionar um elemento OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Adicionar um elemento OpenSCAD inserindo código OpenSCAD e executando o binário de OpenSCAD @@ -243,12 +203,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Colorir formas - + Color Shapes by validity and type Colorir as formas pelo tipo e validade @@ -256,7 +216,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Converter arestas em faces @@ -264,12 +224,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Expandir placements - + Expand all placements downwards the FeatureTree Expandir todos os placements para baixo na árvore @@ -277,64 +237,64 @@ OpenSCAD_ExplodeGroup - + Explode Group Explodir grupo - + remove fusion, apply placement to children and color randomly - remover a fusão, aplicar localizador às crianças e cor aleatoriamente + remover a fusão, aplicar localizador aos descendentes e cor aleatoriamente OpenSCAD_Hull - + Hull Casco - + Perform Hull - Executar o casco + Executar um casco OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Aumento de tolerância - + Create Feature that allows to increase the tolerance - Criar um objeto que permite aumentar a tolerância + Cria um objeto que permite aumentar a tolerância OpenSCAD_MeshBoolean - + Mesh Boolean... - Booleana de malha... + Booliana de malha... - + Export objects as meshes and use OpenSCAD to perform a boolean operation. - Exportar objetos como malhas e usar OpenSCAD para executar uma operação booleana. + Exportar objetos como malhas e usar OpenSCAD para executar uma operação booliana. OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Executar Minkowski @@ -342,12 +302,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Refinamento de forma - + Create Refine Shape Feature Criar um objeto de refinamento de forma @@ -355,12 +315,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Remover objetos e seus descendentes - + Removes the selected objects and all children that are not referenced from other objects Remove os objetos selecionados e todos os seus descendentes que não são referenciados por outros objetos @@ -368,14 +328,30 @@ OpenSCAD_ReplaceObject - + Replace Object Substituir um objeto - + Replace an object in the Feature Tree. Please select old, new and parent object Substituir um objeto na árvore. Por favor, selecione o velho, o novo e objeto pai + + Workbech + + + OpenSCAD Part tools + Ferramentas de peça OpenSCAD + + + + Workbench + + + OpenSCADTools + OpenSCADTools + + diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-PT.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-PT.qm index cc024428c4..4269627fa7 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-PT.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-PT.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-PT.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-PT.ts index 85245f8ab8..3e4080c509 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-PT.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-PT.ts @@ -28,35 +28,30 @@ OpenSCAD import Importar OpenSCAD - - - If this is checked, Features will claim thier children in the tree view - If this is checked, Features will claim thier children in the tree view - Use ViewProvider in Tree View - Use ViewProvider in Tree View + Usar o ViewProvider na vista de árvore If this is checked, Multmatrix Object will be Parametric - If this is checked, Multmatrix Object will be Parametric + Se marcado, os objetos Multimatrix serão paramétricos Use Multmatrix Feature - Use Multmatrix Feature + Usar Multmatrix The maximum number of faces of a polygon, prism or frustum. If fn is greater than this value the object is considered to be a circular. Set to 0 for no limit - The maximum number of faces of a polygon, prism or frustum. If fn is greater than this value the object is considered to be a circular. Set to 0 for no limit + O número máximo de faces de um polígono, prisma ou tronco. Se fn é superior a este valor, o objeto é considerado uma circular. Definir como 0 para sem limite Maximum number of faces for polygons (fn) - Maximum number of faces for polygons (fn) + Número máximo de faces de polígonos (fn) @@ -109,167 +104,132 @@ Mesh fallback - - Maxium Length - Comprimento Máximo - - - - MaxLength - Comprimento Máximo - - - - Maximum Length - Comprimento Máximo - - - - Maximum Area - Área Máxima - - - - maxArea - Área Máxima - - - - Local Length - Comprimento Local - - - - localLen - Comprimento Local - - - + Deflection Deflexão - + deflection deflexão - + Triangulation settings Definições de Triangulação + + + If this is checked, Features will claim their children in the tree view + If this is checked, Features will claim their children in the tree view + OpenSCAD - + Convert Edges to Faces Converter Arestas para Faces - + Please select 3 objects first Por favor, selecione primeiro 3 objetos - + Unsupported Function Função não Suportada - + Press OK Pressione OK - - Projection Not yet Coded waiting for Peter Li - Projection Not yet Coded waiting for Peter Li - - - - Press OK - Pressione OK - - - + Add Adicionar - + Clear Limpar - + as Mesh - as Mesh + como malha (mesh) - + Add OpenSCAD Element - Add OpenSCAD Element + Adicionar elemento OpenSCAD - + Perform - Perform + Executar - + Mesh Boolean Mesh Boolean - + Error all shapes must be either 2D or both must be 3D Error all shapes must be either 2D or both must be 3D + + + Unable to explode %s + Unable to explode %s + OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... - Add OpenSCAD Element... + Adicionar elemento OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary - Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary + Adicionar um elemento de OpenSCAD inserindo código OpenSCAD e executando o aplicativo OpenSCAD OpenSCAD_ColorCodeShape - + Color Shapes - Color Shapes + Formas de cor - + Color Shapes by validity and type - Color Shapes by validity and type + Formas de cor pela validade e tipo OpenSCAD_Edgestofaces - + Convert Edges To Faces - Convert Edges To Faces + Converter arestas em faces OpenSCAD_ExpandPlacements - + Expand Placements Expand Placements - + Expand all placements downwards the FeatureTree Expand all placements downwards the FeatureTree @@ -277,12 +237,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Explode Group - + remove fusion, apply placement to children and color randomly remove fusion, apply placement to children and color randomly @@ -290,12 +250,12 @@ OpenSCAD_Hull - + Hull Hull - + Perform Hull Perform Hull @@ -303,12 +263,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Increase Tolerance Feature - + Create Feature that allows to increase the tolerance Create Feature that allows to increase the tolerance @@ -316,12 +276,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Mesh Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation. Export objects as meshes and use OpenSCAD to perform a boolean operation. @@ -329,12 +289,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Perform Minkowski @@ -342,12 +302,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Refine Shape Feature - + Create Refine Shape Feature Create Refine Shape Feature @@ -355,27 +315,43 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children - Remove Objects and their Children + Remover objetos e seus dependentes - + Removes the selected objects and all children that are not referenced from other objects - Removes the selected objects and all children that are not referenced from other objects + Remove os objetos selecionados e todos os dependentes que não são referenciadas por outros objetos OpenSCAD_ReplaceObject - + Replace Object - Replace Object + Substituir objeto - + Replace an object in the Feature Tree. Please select old, new and parent object - Replace an object in the Feature Tree. Please select old, new and parent object + Substitui um objeto na árvore de recursos. Por favor selecione o anterior, novo e objeto origem + + + + Workbech + + + OpenSCAD Part tools + OpenSCAD Part tools + + + + Workbench + + + OpenSCADTools + OpenSCADTools diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.qm index 04cb9630ff..2ac776a283 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.ts index fa23eb6459..1a59706836 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ro.ts @@ -28,11 +28,6 @@ OpenSCAD import Import OpenSCAD - - - If this is checked, Features will claim thier children in the tree view - Dacă această casuţă este bifată, componentele îşi vor însuşii copii în vizualizarea arbore - Use ViewProvider in Tree View @@ -109,133 +104,98 @@ Retea de rezerva - - Maxium Length - Lungime maxima - - - - MaxLength - MaxLength - - - - Maximum Length - Lungime maxima - - - - Maximum Area - Suprafata maxima - - - - maxArea - maxArea - - - - Local Length - Lungimea locala - - - - localLen - localLen - - - + Deflection Deformarea - + deflection deformarea - + Triangulation settings Setari pentru triangulatie + + + If this is checked, Features will claim their children in the tree view + Dacă această casuţă este bifată, componentele îşi vor însuşii copii în vizualizarea arbore + OpenSCAD - + Convert Edges to Faces Convertiti marginile in fete - + Please select 3 objects first Selectati mai intai 3 obiecte - + Unsupported Function Functia nu este suportata - + Press OK Apasati Ok - - Projection Not yet Coded waiting for Peter Li - Proiectia il asteapta pe Petrea lu' Li - - - - Press OK - Apasati Ok - - - + Add Adaugă - + Clear Eliberează - + as Mesh o retea - + Add OpenSCAD Element Adauga element OpenSCAD - + Perform - Perform + Efectuează - + Mesh Boolean Mesh Boolean - + Error all shapes must be either 2D or both must be 3D Error all shapes must be either 2D or both must be 3D + + + Unable to explode %s + Nu se poate exploda %s + OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Adauga element OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Adauga u element OpenSCAD prin introducerea unui cod OpenSCAD si executarea codului binar @@ -243,12 +203,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Forme de culoare - + Color Shapes by validity and type Forme de culoare dupa validitate si tip @@ -256,7 +216,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Conversie margini in fete @@ -264,12 +224,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Amplasamente expandate - + Expand all placements downwards the FeatureTree Extinde toate amplasamentele mai jos de FeatureTree @@ -277,12 +237,12 @@ OpenSCAD_ExplodeGroup - + Explode Group - Explode Group + Explodare grup - + remove fusion, apply placement to children and color randomly remove fusion, apply placement to children and color randomly @@ -290,38 +250,38 @@ OpenSCAD_Hull - + Hull - Hull + carenă - + Perform Hull - Perform Hull + Efectuează Hull OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature - Increase Tolerance Feature + Crește funcția toleranței - + Create Feature that allows to increase the tolerance - Create Feature that allows to increase the tolerance + Creează o funcție care permite creșterea toleranței OpenSCAD_MeshBoolean - + Mesh Boolean... Mesh Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation. Export objects as meshes and use OpenSCAD to perform a boolean operation. @@ -329,25 +289,25 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski - Perform Minkowski + Efectuează Minkowski OpenSCAD_RefineShapeFeature - + Refine Shape Feature Rafineaza caracteristica de forma - + Create Refine Shape Feature Creaza rafinament de forma @@ -355,12 +315,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Elimina obiectele si copii lor - + Removes the selected objects and all children that are not referenced from other objects Elimina obiectele selectate si toti copiii care nu sunt referentiati de alte obiecte @@ -368,14 +328,30 @@ OpenSCAD_ReplaceObject - + Replace Object Inlocuieste obiectul - + Replace an object in the Feature Tree. Please select old, new and parent object Inlocuieste un obiect in FeatureTree. Selectati obiectul vechi, cel nou si obiectul parinte + + Workbech + + + OpenSCAD Part tools + OpenSCAD Part tools + + + + Workbench + + + OpenSCADTools + Unelte OpenSCAD + + diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.qm index 271f515b4e..515d273baf 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.ts index ba43f59122..9a54678707 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ru.ts @@ -28,11 +28,6 @@ OpenSCAD import Импорт OpenSCAD - - - If this is checked, Features will claim thier children in the tree view - Если этот флажок установлен, Функционал будет представлен в виде дерева - Use ViewProvider in Tree View @@ -109,133 +104,98 @@ Отмена сетки - - Maxium Length - Максимальная длина - - - - MaxLength - Максимальная длина - - - - Maximum Length - Максимальная длина - - - - Maximum Area - Максимальная площадь - - - - maxArea - максимальная область - - - - Local Length - Текущая длина - - - - localLen - текущая длина - - - + Deflection Прогиб - + deflection прогиб - + Triangulation settings Параметры триангуляции + + + If this is checked, Features will claim their children in the tree view + If this is checked, Features will claim their children in the tree view + OpenSCAD - + Convert Edges to Faces Преобразовать рёбра в грани - + Please select 3 objects first Сначала необходимо выбрать 3 объекта - + Unsupported Function Неподдерживаемая функция - + Press OK Нажмите кнопку OK - - Projection Not yet Coded waiting for Peter Li - Ещё не доработано, ждём Питера Ли - - - - Press OK - Нажмите кнопку OK - - - + Add Добавить - + Clear Очистить - + as Mesh как Полигональная сетка - + Add OpenSCAD Element Добавка элемента OpenSCAD - + Perform Perform - + Mesh Boolean Mesh Boolean - + Error all shapes must be either 2D or both must be 3D Error all shapes must be either 2D or both must be 3D + + + Unable to explode %s + Unable to explode %s + OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Добавить элемент OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Добавить элемент OpenSCAD, введя двоичный код и выполнив его @@ -243,12 +203,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Выделение цветом - + Color Shapes by validity and type Цвета Фигур по действию и типу @@ -256,7 +216,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Преобразовать грани в поверхности @@ -264,12 +224,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Развернуть - + Expand all placements downwards the FeatureTree Развернуть вниз Функциональное дерево @@ -277,12 +237,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Explode Group - + remove fusion, apply placement to children and color randomly remove fusion, apply placement to children and color randomly @@ -290,12 +250,12 @@ OpenSCAD_Hull - + Hull - Hull + Корпус - + Perform Hull Perform Hull @@ -303,12 +263,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Increase Tolerance Feature - + Create Feature that allows to increase the tolerance Create Feature that allows to increase the tolerance @@ -316,12 +276,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Mesh Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation. Export objects as meshes and use OpenSCAD to perform a boolean operation. @@ -329,12 +289,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Perform Minkowski @@ -342,12 +302,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Улучшить свойство фигуры - + Create Refine Shape Feature Задать улучшения свойств фигуры @@ -355,12 +315,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Удалить объекты вместе с их потомками - + Removes the selected objects and all children that are not referenced from other objects Удаляет в выбранных объектах и все дочерние, на которых нет ссылок из других объектов @@ -368,14 +328,30 @@ OpenSCAD_ReplaceObject - + Replace Object Заменить объект - + Replace an object in the Feature Tree. Please select old, new and parent object Заменить объект в Функциональном дереве. Выберите, пожалуйста, старые, новые, родительский объект + + Workbech + + + OpenSCAD Part tools + OpenSCAD Part tools + + + + Workbench + + + OpenSCADTools + OpenSCADTools + + diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sr.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sr.qm new file mode 100644 index 0000000000..41ff8c85f1 Binary files /dev/null and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sr.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sr.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sr.ts new file mode 100644 index 0000000000..c2281c09cf --- /dev/null +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sr.ts @@ -0,0 +1,357 @@ + + + + + Gui::Dialog::DlgSettingsOpenSCAD + + + General settings + Општа подешавања + + + + General OpenSCAD Settings + Основне OpenSCAD Поставке + + + + OpenSCAD executable + OpenSCAD извршна датотека + + + + The path to the OpenSCAD executeable + Путања до OpenSCAD извршне датотеке + + + + OpenSCAD import + OpenSCAD увоз + + + + Use ViewProvider in Tree View + Кориcти ViewProvider у приказу cтабла + + + + If this is checked, Multmatrix Object will be Parametric + Ако је означено, Мултиматрикc Објекат ће бити параметарcки + + + + Use Multmatrix Feature + Use Multmatrix Feature + + + + The maximum number of faces of a polygon, prism or frustum. If fn is greater than this value the object is considered to be a circular. Set to 0 for no limit + The maximum number of faces of a polygon, prism or frustum. If fn is greater than this value the object is considered to be a circular. Set to 0 for no limit + + + + Maximum number of faces for polygons (fn) + Maximum number of faces for polygons (fn) + + + + OpenSCAD export + OpenSCAD извоз + + + + maximum fragment size + макcимална величина фрагмената + + + + minimum angle for a fragment + минимални угао фрагмента + + + + angular (fa) + угаони (fa) + + + + ° + ° + + + + minimum size of a fragment + минимална величина фрагмента + + + + size (fs) + величина (fs) + + + + mm + мм + + + + convexity + конвекcноcт + + + + Mesh fallback + Mesh fallback + + + + Deflection + Дефлекcија + + + + deflection + дефлекcија + + + + Triangulation settings + Подешавања триангулације + + + + If this is checked, Features will claim their children in the tree view + If this is checked, Features will claim their children in the tree view + + + + OpenSCAD + + + Convert Edges to Faces + Претвори Рубове у Површи + + + + Please select 3 objects first + Молимо, прво одаберите 3 објекта + + + + Unsupported Function + Неподржана функција + + + + Press OK + Притисните OK + + + + Add + Додај + + + + Clear + Обриши + + + + as Mesh + као Мрежа + + + + Add OpenSCAD Element + Додај OpenSCAD Елемент + + + + Perform + Извршити + + + + Mesh Boolean + Булова cа Мрежом + + + + Error all shapes must be either 2D or both must be 3D + Грешка,cви облици морају бити 2D,или оба морају бити 3D + + + + Unable to explode %s + Unable to explode %s + + + + OpenSCAD_AddOpenSCADElement + + + Add OpenSCAD Element... + Отвори OpenSCAD елемент... + + + + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary + Додај OpenSCAD елемент уношењем OpenSCAD кода и покретањем OpenSCAD бинарне датотеке + + + + OpenSCAD_ColorCodeShape + + + Color Shapes + Обоји Облике + + + + Color Shapes by validity and type + Color Shapes by validity and type + + + + OpenSCAD_Edgestofaces + + + Convert Edges To Faces + Претвори Рубове у Површи + + + + OpenSCAD_ExpandPlacements + + + Expand Placements + Expand Placements + + + + Expand all placements downwards the FeatureTree + Expand all placements downwards the FeatureTree + + + + OpenSCAD_ExplodeGroup + + + Explode Group + Explode Group + + + + remove fusion, apply placement to children and color randomly + remove fusion, apply placement to children and color randomly + + + + OpenSCAD_Hull + + + Hull + Hull + + + + Perform Hull + Perform Hull + + + + OpenSCAD_IncreaseToleranceFeature + + + Increase Tolerance Feature + Increase Tolerance Feature + + + + Create Feature that allows to increase the tolerance + Create Feature that allows to increase the tolerance + + + + OpenSCAD_MeshBoolean + + + Mesh Boolean... + Mesh Boolean... + + + + Export objects as meshes and use OpenSCAD to perform a boolean operation. + Export objects as meshes and use OpenSCAD to perform a boolean operation. + + + + OpenSCAD_Minkowski + + + Minkowski + Minkowski + + + + Perform Minkowski + Perform Minkowski + + + + OpenSCAD_RefineShapeFeature + + + Refine Shape Feature + Refine Shape Feature + + + + Create Refine Shape Feature + Create Refine Shape Feature + + + + OpenSCAD_RemoveSubtree + + + Remove Objects and their Children + Remove Objects and their Children + + + + Removes the selected objects and all children that are not referenced from other objects + Removes the selected objects and all children that are not referenced from other objects + + + + OpenSCAD_ReplaceObject + + + Replace Object + Replace Object + + + + Replace an object in the Feature Tree. Please select old, new and parent object + Replace an object in the Feature Tree. Please select old, new and parent object + + + + Workbech + + + OpenSCAD Part tools + OpenSCAD Part tools + + + + Workbench + + + OpenSCADTools + OpenSCADTools + + + diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.qm index 5da59f8f37..8a1bb1eafc 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.ts index 3b0e7f23c9..b9bf6c95c0 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.ts @@ -28,11 +28,6 @@ OpenSCAD import OpenSCAD import - - - If this is checked, Features will claim thier children in the tree view - Om detta är markerat, så kommer föremål att hävda sina barn i trädvyn - Use ViewProvider in Tree View @@ -109,133 +104,98 @@ Mesh fallback - - Maxium Length - Maximal längd - - - - MaxLength - MaxLength - - - - Maximum Length - Maximal längd - - - - Maximum Area - Maximal area - - - - maxArea - maxArea - - - - Local Length - Local Length - - - - localLen - localLen - - - + Deflection Deflection - + deflection deflection - + Triangulation settings Triangulation settings + + + If this is checked, Features will claim their children in the tree view + If this is checked, Features will claim their children in the tree view + OpenSCAD - + Convert Edges to Faces Convert Edges to Faces - + Please select 3 objects first Please select 3 objects first - + Unsupported Function Unsupported Function - + Press OK Tryck OK - - Projection Not yet Coded waiting for Peter Li - Projection Not yet Coded waiting for Peter Li - - - - Press OK - Tryck OK - - - + Add Lägg till - + Clear Rensa - + as Mesh as Mesh - + Add OpenSCAD Element Add OpenSCAD Element - + Perform Perform - + Mesh Boolean Mesh Boolean - + Error all shapes must be either 2D or both must be 3D Error all shapes must be either 2D or both must be 3D + + + Unable to explode %s + Unable to explode %s + OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Add OpenSCAD Element... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary @@ -243,12 +203,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Color Shapes - + Color Shapes by validity and type Color Shapes by validity and type @@ -256,7 +216,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces Convert Edges To Faces @@ -264,12 +224,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Expand Placements - + Expand all placements downwards the FeatureTree Expand all placements downwards the FeatureTree @@ -277,12 +237,12 @@ OpenSCAD_ExplodeGroup - + Explode Group - Explodera grupp + Explode Group - + remove fusion, apply placement to children and color randomly remove fusion, apply placement to children and color randomly @@ -290,12 +250,12 @@ OpenSCAD_Hull - + Hull Hull - + Perform Hull Perform Hull @@ -303,12 +263,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Increase Tolerance Feature - + Create Feature that allows to increase the tolerance Create Feature that allows to increase the tolerance @@ -316,12 +276,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Mesh Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation. Export objects as meshes and use OpenSCAD to perform a boolean operation. @@ -329,12 +289,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Perform Minkowski @@ -342,12 +302,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Refine Shape Feature - + Create Refine Shape Feature Create Refine Shape Feature @@ -355,12 +315,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Remove Objects and their Children - + Removes the selected objects and all children that are not referenced from other objects Removes the selected objects and all children that are not referenced from other objects @@ -368,14 +328,30 @@ OpenSCAD_ReplaceObject - + Replace Object Ersätt objekt - + Replace an object in the Feature Tree. Please select old, new and parent object Replace an object in the Feature Tree. Please select old, new and parent object + + Workbech + + + OpenSCAD Part tools + OpenSCAD Part tools + + + + Workbench + + + OpenSCADTools + OpenSCADTools + + diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.qm index 1cb5d0b747..f1dc078188 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.ts index 93998dd7d2..eaa1ee19ea 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_uk.ts @@ -28,11 +28,6 @@ OpenSCAD import OpenSCAD імпорт - - - If this is checked, Features will claim thier children in the tree view - Якщо це вибрано, то властивості будуть надаватися своїм дітям у дереві перегляду - Use ViewProvider in Tree View @@ -109,133 +104,98 @@ Mesh fallback - - Maxium Length - Максимальна довжина - - - - MaxLength - МаксДовжина - - - - Maximum Length - Максимальна довжина - - - - Maximum Area - Максимальна площа - - - - maxArea - максПлоща - - - - Local Length - Локальна довжина - - - - localLen - локалДовжина - - - + Deflection Відхилення - + deflection відхилення - + Triangulation settings Налаштування тріангуляції + + + If this is checked, Features will claim their children in the tree view + If this is checked, Features will claim their children in the tree view + OpenSCAD - + Convert Edges to Faces - Перетворити Краї в Грані + Перетворити ребра в грані - + Please select 3 objects first Будь ласка, оберіть спочатку 3 об'єкти - + Unsupported Function Непідтримувані функції - + Press OK Натисніть OK - - Projection Not yet Coded waiting for Peter Li - Projection Not yet Coded waiting for Peter Li - - - - Press OK - Натисніть OK - - - + Add Додати - + Clear Очистити - + as Mesh - as Mesh + як сітку - + Add OpenSCAD Element Додати елемент OpenSCAD - + Perform Perform - + Mesh Boolean Mesh Boolean - + Error all shapes must be either 2D or both must be 3D Error all shapes must be either 2D or both must be 3D + + + Unable to explode %s + Unable to explode %s + OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... Додати елемент OpenSCAD... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary Додати елемент OpenSCAD, ввівши код OpenSCAD і запустивши OpenSCAD @@ -243,12 +203,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes Колір фігур - + Color Shapes by validity and type Колір фігури залежно від терміну дії та типу @@ -256,20 +216,20 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces - Перетворити Краї в Грані + Перетворити ребра в грані OpenSCAD_ExpandPlacements - + Expand Placements Розгорнути місця розташування - + Expand all placements downwards the FeatureTree Розгорнути всі місця розташування вниз на FeatureTree @@ -277,12 +237,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Explode Group - + remove fusion, apply placement to children and color randomly remove fusion, apply placement to children and color randomly @@ -290,12 +250,12 @@ OpenSCAD_Hull - + Hull Hull - + Perform Hull Perform Hull @@ -303,12 +263,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Increase Tolerance Feature - + Create Feature that allows to increase the tolerance Create Feature that allows to increase the tolerance @@ -316,12 +276,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Mesh Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation. Export objects as meshes and use OpenSCAD to perform a boolean operation. @@ -329,12 +289,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Perform Minkowski @@ -342,12 +302,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature Refine Shape Feature - + Create Refine Shape Feature Create Refine Shape Feature @@ -355,12 +315,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children Видалити об'єкти і їхніх нащадків - + Removes the selected objects and all children that are not referenced from other objects Removes the selected objects and all children that are not referenced from other objects @@ -368,14 +328,30 @@ OpenSCAD_ReplaceObject - + Replace Object Замінити об'єкт - + Replace an object in the Feature Tree. Please select old, new and parent object Replace an object in the Feature Tree. Please select old, new and parent object + + Workbech + + + OpenSCAD Part tools + OpenSCAD Part tools + + + + Workbench + + + OpenSCADTools + OpenSCADTools + + diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-CN.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-CN.qm index 422af8a9a7..1a71d2eba9 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-CN.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-CN.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-CN.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-CN.ts index 100e07789a..a121592623 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-CN.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-CN.ts @@ -28,11 +28,6 @@ OpenSCAD import OpenSCAD导入 - - - If this is checked, Features will claim thier children in the tree view - 选中此项则在树结构图中显示特征继承关系 - Use ViewProvider in Tree View @@ -109,133 +104,98 @@ Mesh fallback - - Maxium Length - 最大长度 - - - - MaxLength - 最大长度 - - - - Maximum Length - 最大长度 - - - - Maximum Area - 最大面积 - - - - maxArea - 最大面积 - - - - Local Length - 本地长度 - - - - localLen - 本地长度 - - - + Deflection 挠度 - + deflection 挠度 - + Triangulation settings 三角剖分设置 + + + If this is checked, Features will claim their children in the tree view + If this is checked, Features will claim their children in the tree view + OpenSCAD - + Convert Edges to Faces 转换边缘为面 - + Please select 3 objects first 请先选择三个对象 - + Unsupported Function 不支持的功能 - + Press OK 按确定 - - Projection Not yet Coded waiting for Peter Li - 投影函数尚等待李Peter编码中 - - - - Press OK - 按确定 - - - + Add 添加 - + Clear 清除 - + as Mesh 作为网格 - + Add OpenSCAD Element 添加OpenSCAD元素 - + Perform Perform - + Mesh Boolean Mesh Boolean - + Error all shapes must be either 2D or both must be 3D Error all shapes must be either 2D or both must be 3D + + + Unable to explode %s + Unable to explode %s + OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... 添加OpenSCAD元素... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary 通过输入OpenSCAD代码和执行OpenSCAD程序添加OpenSCAD元素 @@ -243,12 +203,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes 形体着色 - + Color Shapes by validity and type 按有效性和类型给形体着色 @@ -256,7 +216,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces 转换边缘为面 @@ -264,12 +224,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements Expand Placements - + Expand all placements downwards the FeatureTree Expand all placements downwards the FeatureTree @@ -277,12 +237,12 @@ OpenSCAD_ExplodeGroup - + Explode Group Explode Group - + remove fusion, apply placement to children and color randomly remove fusion, apply placement to children and color randomly @@ -290,12 +250,12 @@ OpenSCAD_Hull - + Hull Hull - + Perform Hull Perform Hull @@ -303,12 +263,12 @@ OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature Increase Tolerance Feature - + Create Feature that allows to increase the tolerance Create Feature that allows to increase the tolerance @@ -316,12 +276,12 @@ OpenSCAD_MeshBoolean - + Mesh Boolean... Mesh Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation. Export objects as meshes and use OpenSCAD to perform a boolean operation. @@ -329,12 +289,12 @@ OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski Perform Minkowski @@ -342,12 +302,12 @@ OpenSCAD_RefineShapeFeature - + Refine Shape Feature 细化形体特征 - + Create Refine Shape Feature 创建细化形体特征 @@ -355,12 +315,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children 删除对象及其子对象 - + Removes the selected objects and all children that are not referenced from other objects 移除所有选择的对象及其子对象 @@ -368,14 +328,30 @@ OpenSCAD_ReplaceObject - + Replace Object 替换对象 - + Replace an object in the Feature Tree. Please select old, new and parent object 替换特征树中的对象.请选择原始对象、新对象和父节点对象 + + Workbech + + + OpenSCAD Part tools + OpenSCAD Part tools + + + + Workbench + + + OpenSCADTools + OpenSCADTools + + diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-TW.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-TW.qm index 1f4b1226cb..5ae31fe8d1 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-TW.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-TW.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-TW.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-TW.ts index 12c63b9dd6..badcce0ea7 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-TW.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_zh-TW.ts @@ -28,11 +28,6 @@ OpenSCAD import 匯入OpenSCAD - - - If this is checked, Features will claim thier children in the tree view - 若已確認,將於樹枝圖納入其子項 - Use ViewProvider in Tree View @@ -109,133 +104,98 @@ 網格退縮 - - Maxium Length - 最大長度 - - - - MaxLength - 最大長度 - - - - Maximum Length - 最大長度 - - - - Maximum Area - 最大面積 - - - - maxArea - 最大面積 - - - - Local Length - 區域長度 - - - - localLen - 區域長度 - - - + Deflection 偏斜 - + deflection 偏斜 - + Triangulation settings 三角測量設定 + + + If this is checked, Features will claim their children in the tree view + If this is checked, Features will claim their children in the tree view + OpenSCAD - + Convert Edges to Faces 轉換邊為面 - + Please select 3 objects first 請先選擇3個物件 - + Unsupported Function 此功能未支援 - + Press OK 按確定 - - Projection Not yet Coded waiting for Peter Li - 投影功能尚待Peter Li撰寫 - - - - Press OK - 按確定 - - - + Add 新增 - + Clear 清除 - + as Mesh 當作網格 - + Add OpenSCAD Element 加入OpenSCAD元素 - + Perform - 執行 + Perform - + Mesh Boolean - 網格布林值 + Mesh Boolean - + Error all shapes must be either 2D or both must be 3D - 錯誤,所有的造型必須有一個是2D或兩者皆是3D + Error all shapes must be either 2D or both must be 3D + + + + Unable to explode %s + Unable to explode %s OpenSCAD_AddOpenSCADElement - + Add OpenSCAD Element... 加入OpenSCAD元素... - + Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary 藉由輸入OpenSCAD語言並執行OpenSCAD程式加入OpenSCAD元素 @@ -243,12 +203,12 @@ OpenSCAD_ColorCodeShape - + Color Shapes 對造型上色 - + Color Shapes by validity and type 依有效性及類型對造型上色 @@ -256,7 +216,7 @@ OpenSCAD_Edgestofaces - + Convert Edges To Faces 轉換邊緣為面 @@ -264,12 +224,12 @@ OpenSCAD_ExpandPlacements - + Expand Placements 擴大配置 - + Expand all placements downwards the FeatureTree 擴大功能樹下方配置 @@ -277,77 +237,77 @@ OpenSCAD_ExplodeGroup - + Explode Group - 分離群組 + Explode Group - + remove fusion, apply placement to children and color randomly - 移除合併,並任意提供子物件定位及色彩配置 + remove fusion, apply placement to children and color randomly OpenSCAD_Hull - + Hull 殼體 - + Perform Hull - 執行殼體 + Perform Hull OpenSCAD_IncreaseToleranceFeature - + Increase Tolerance Feature - 增加容忍功能 + Increase Tolerance Feature - + Create Feature that allows to increase the tolerance - 建立允許增加公差的功能 + Create Feature that allows to increase the tolerance OpenSCAD_MeshBoolean - + Mesh Boolean... - 網格布林值... + Mesh Boolean... - + Export objects as meshes and use OpenSCAD to perform a boolean operation. - 網格型式匯出物件並使用OpenSCAD執行布林運算 + Export objects as meshes and use OpenSCAD to perform a boolean operation. OpenSCAD_Minkowski - + Minkowski Minkowski - + Perform Minkowski - 執行Minkowski + Perform Minkowski OpenSCAD_RefineShapeFeature - + Refine Shape Feature 調整造型功能 - + Create Refine Shape Feature 建立調整造型功能 @@ -355,12 +315,12 @@ OpenSCAD_RemoveSubtree - + Remove Objects and their Children 移除物件及其子物件 - + Removes the selected objects and all children that are not referenced from other objects 移除所選物件及其所有未被其他物件所參考之子物件 @@ -368,14 +328,30 @@ OpenSCAD_ReplaceObject - + Replace Object 替換物件 - + Replace an object in the Feature Tree. Please select old, new and parent object 於功能樹中置換物件,請選擇舊,新及其母物件 + + Workbech + + + OpenSCAD Part tools + OpenSCAD Part tools + + + + Workbench + + + OpenSCADTools + OpenSCADTools + + diff --git a/src/Mod/Part/Gui/Resources/Part.qrc b/src/Mod/Part/Gui/Resources/Part.qrc index cf6564cae9..2d9c68ac0b 100644 --- a/src/Mod/Part/Gui/Resources/Part.qrc +++ b/src/Mod/Part/Gui/Resources/Part.qrc @@ -82,5 +82,6 @@ translations/Part_ro.qm translations/Part_hu.qm translations/Part_pt-PT.qm + translations/Part_sr.qm diff --git a/src/Mod/Part/Gui/Resources/translations/Part_af.qm b/src/Mod/Part/Gui/Resources/translations/Part_af.qm index 78ba67a591..e6890dfa79 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_af.qm and b/src/Mod/Part/Gui/Resources/translations/Part_af.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_af.ts b/src/Mod/Part/Gui/Resources/translations/Part_af.ts index 0e98866521..e10a20ea83 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_af.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_af.ts @@ -1219,11 +1219,7 @@ Succeeded - - - - Suceeded - Suceeded + Succeeded @@ -1393,7 +1389,7 @@ Kies eers 'n geldige vorm in die vallys. IGES - + IGES @@ -1403,7 +1399,7 @@ Kies eers 'n geldige vorm in die vallys. Units for export of IGES - + Units for export of IGES @@ -1423,37 +1419,37 @@ Kies eers 'n geldige vorm in die vallys. Enable B-REP mode - + Enable B-REP mode Import - + Import Skip blank entities - + Skip blank entities Header - + Header Company - + Company Product - + Product Author - + Author @@ -1461,7 +1457,7 @@ Kies eers 'n geldige vorm in die vallys. STEP - + STEP @@ -1471,7 +1467,7 @@ Kies eers 'n geldige vorm in die vallys. Units for export of STEP - + Units for export of STEP @@ -1491,27 +1487,27 @@ Kies eers 'n geldige vorm in die vallys. Scheme - + Scheme Header - + Header Company - + Company Author - + Author Product - + Product @@ -1965,28 +1961,28 @@ Kies eers 'n geldige vorm in die vallys. U parameter: - + U parameter: V parameters: - + V parameters: Radius 3: - Radius 2: {3:?} + Radius 3: V parameter: - + V parameter: U Parameter: - + U Parameter: U parametric: @@ -2597,7 +2593,7 @@ Kies eers 'n geldige vorm in die vallys. Select three or more vertices - + Select three or more vertices @@ -2622,7 +2618,7 @@ Kies eers 'n geldige vorm in die vallys. Select a list of vertices - + Select a list of vertices @@ -2672,7 +2668,7 @@ Kies eers 'n geldige vorm in die vallys. Select one or more connected edges you want to sweep along. - + Select one or more connected edges you want to sweep along. @@ -2707,13 +2703,13 @@ Kies eers 'n geldige vorm in die vallys. Select one or more connected edges in the 3d view and press 'Done' - + Select one or more connected edges in the 3d view and press 'Done' The selected sweep path is invalid. - + The selected sweep path is invalid. @@ -3068,7 +3064,7 @@ Kies eers 'n geldige vorm in die vallys. Face from vertices - + Face from vertices @@ -3111,7 +3107,7 @@ Kies eers 'n geldige vorm in die vallys. Sweep Path - + Sweep Path @@ -3259,7 +3255,7 @@ Do you want to continue? Import-Export - + Import-Export diff --git a/src/Mod/Part/Gui/Resources/translations/Part_cs.qm b/src/Mod/Part/Gui/Resources/translations/Part_cs.qm index a06033ab59..9fa530e344 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_cs.qm and b/src/Mod/Part/Gui/Resources/translations/Part_cs.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts index 763892fb56..62722f7dee 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts @@ -345,7 +345,7 @@ Advanced utility to create shapes - Rozšířeneé nástroje pro tvorbu útvarů + Rozšířené nástroje pro tvorbu útvarů @@ -1219,11 +1219,7 @@ Succeeded - - - - Suceeded - Úspěšně dokončeno + Proběhlo úspěšně @@ -1391,7 +1387,7 @@ Please select a valid shape in the drop-down box first. IGES - + IGES @@ -1401,7 +1397,7 @@ Please select a valid shape in the drop-down box first. Units for export of IGES - + Jednotky pro export formátu IGES @@ -1421,37 +1417,37 @@ Please select a valid shape in the drop-down box first. Enable B-REP mode - + Povolit režim B-REP Import - + Import Skip blank entities - + Přeskočit prázdné entity Header - + Hlavička Company - + Společnost Product - + Produkt Author - + Autor @@ -1459,7 +1455,7 @@ Please select a valid shape in the drop-down box first. STEP - + STEP @@ -1469,7 +1465,7 @@ Please select a valid shape in the drop-down box first. Units for export of STEP - + Jednotky pro export formátu STEP @@ -1489,27 +1485,27 @@ Please select a valid shape in the drop-down box first. Scheme - + Schéma Header - + Hlavička Company - + Společnost Author - + Autor Product - + Produkt @@ -1963,28 +1959,28 @@ Please select a valid shape in the drop-down box first. U parameter: - + Parametr U: V parameters: - + Parametry V: Radius 3: - Poloměr 2: {3:?} + Poloměr 3: V parameter: - + Parametr V: U Parameter: - + Parametr U: U parametric: @@ -2183,7 +2179,7 @@ Please select a valid shape in the drop-down box first. Create Solid - Create Solid + Vytvoř těleso @@ -2373,7 +2369,7 @@ Please select a valid shape in the drop-down box first. Default line width - Default line width + Výchozí tloušťka čáry @@ -2595,7 +2591,7 @@ Please select a valid shape in the drop-down box first. Select three or more vertices - + Vyberte tři nebo více vrcholů @@ -2620,7 +2616,7 @@ Please select a valid shape in the drop-down box first. Select a list of vertices - + Vyberte seznam vrcholů @@ -2670,7 +2666,7 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges you want to sweep along. - + Vyberte jednu nebo více spojitých hran, podél kterých kterých chcete provést Tažení. @@ -2690,7 +2686,7 @@ Please select a valid shape in the drop-down box first. '%1' cannot be used as profile and path. - '%1' cannot be used as profile and path. + '%1' nemůže být použit jako profil a cesta. @@ -2705,13 +2701,13 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges in the 3d view and press 'Done' - + Vyberte jednu nebo více spojitých hran v 3D pohledu a stiskněte "Hotovo" The selected sweep path is invalid. - + Vybraná dráha Tažení je neplatná. @@ -3006,7 +3002,7 @@ Please select a valid shape in the drop-down box first. RectoVerso - RectoVerso + Rub-Líc @@ -3066,7 +3062,7 @@ Please select a valid shape in the drop-down box first. Face from vertices - + Plocha z vrcholů @@ -3109,7 +3105,7 @@ Please select a valid shape in the drop-down box first. Sweep Path - + Dráha Tažení @@ -3256,7 +3252,7 @@ Chcete pokračovat? Import-Export - + Import-Export diff --git a/src/Mod/Part/Gui/Resources/translations/Part_de.qm b/src/Mod/Part/Gui/Resources/translations/Part_de.qm index 1da089cd74..eaa5c88277 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_de.qm and b/src/Mod/Part/Gui/Resources/translations/Part_de.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_de.ts b/src/Mod/Part/Gui/Resources/translations/Part_de.ts index 9d47937e8f..4d492618f2 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_de.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_de.ts @@ -1,6 +1,6 @@ - + BlockDefinition @@ -156,7 +156,7 @@ Color per face - Color per face + Farbe pro Fläche @@ -175,7 +175,7 @@ Measure Angular - + Winkel messen @@ -189,7 +189,7 @@ Clear All - + Alles löschen @@ -203,7 +203,7 @@ Measure Linear - + Linear messen @@ -217,7 +217,7 @@ Toggle 3d - + 3D umschalten @@ -231,7 +231,7 @@ Toggle All - + Alle umschalten @@ -245,7 +245,7 @@ Toggle Delta - + Delta umschalten @@ -278,12 +278,12 @@ Cube - + Würfel Create a cube solid - + Würfel erstellen Box @@ -394,12 +394,12 @@ Make compound - + Erzeuge Verbund Make a compound of several shapes - + Erzeuge einen Verbund aus mehreren Formen @@ -659,7 +659,7 @@ Utility to offset - Utility to offset + Werkzeug für Versatz @@ -767,7 +767,7 @@ Create a ruled surface from either two Edges or two wires - + Erstelle eine Regelfläche aus zwei Kanten oder zwei Linienzügen Create a ruled surface from two curves @@ -899,7 +899,7 @@ Utility to apply a thickness - Utility to apply a thickness + Werkzeug um Dicke anzuwenden @@ -1071,7 +1071,7 @@ Solids - Festkörper + Volumenkörper @@ -1119,17 +1119,17 @@ Performing union on non-solids is not possible - Vereinigung von Nicht-Festkörpern nicht möglich + Vereinigung von Nicht-Volumenkörpern nicht möglich Performing intersection on non-solids is not possible - Überschneidung von Nicht-Festkörpern nicht möglich + Schnittmenge von Nicht-Volumenkörpern nicht möglich Performing difference on non-solids is not possible - Differenz von Nicht-Festkörpern nicht möglich + Differenz von Nicht-Volumenkörpern nicht möglich @@ -1219,14 +1219,14 @@ Succeeded - + Operation erfolgreich abgeschlossen Failed - + Fehlgeschlagen @@ -1249,12 +1249,12 @@ Select faces - + Flächen auswählen Select edges - + Kanten auswählen @@ -1294,28 +1294,28 @@ Constant Length - + Konstante Länge Variable Length - + Variable Länge Edges to chamfer - + Kanten zum Abschrägen Start length - + Startlänge End length - + Endlänge @@ -1336,7 +1336,7 @@ Length - + Länge @@ -1389,7 +1389,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. IGES - + IGES @@ -1399,7 +1399,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Units for export of IGES - + Einheiten für den Export von IGES @@ -1419,37 +1419,37 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Enable B-REP mode - + B-REP-Modus aktivieren Import - + Import Skip blank entities - + Überspringen von leeren Stellen Header - + Kopfzeile Company - + Firma Product - + Produkt Author - + Author @@ -1457,7 +1457,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. STEP - + STEP @@ -1467,7 +1467,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Units for export of STEP - + Einheiten für den Export von STEP @@ -1487,27 +1487,27 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Scheme - + Schema Header - + Kopfzeile Company - + Firma Author - + Author Product - + Produkt @@ -1870,13 +1870,13 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Prism - + Prisma Spiral - + Spirale @@ -1899,7 +1899,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Regular polygon - + Regelmäßiges Polygon @@ -1961,28 +1961,28 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. U parameter: - + U-Parameter: V parameters: - + V-Parameter: Radius 3: - Radius 2: {3:?} + Radius 3: V parameter: - + V-Parameter: U Parameter: - + U-Parameter: U parametric: @@ -1996,13 +1996,13 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Polygon: - + Polygon: Circumradius: - + Umkreisradius: @@ -2047,12 +2047,12 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Growth: - + Wachstum: Number of rotations: - + Anzahl der Drehungen: @@ -2181,7 +2181,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Create Solid - + Volumenkörper erzeugen @@ -2317,17 +2317,17 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Automatically refine model after sketch-based operation - + Verfeinere Modell nach Skizzenoperation automatisch Object naming - + Objektbenennung Add name of base object - + Name des Basisobjekts hinzufügen @@ -2340,70 +2340,70 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Part colors - + Bauteilfarben Default Part colors - + Standard-Bauteilfarben Default shape color - + Standard-Formfarbe The default color for new shapes - + Die Standardfarbe für neue Formen Default line color - + Standard-Kantenfarbe The default line color for new shapes - + Die Standard-Linienfarbe für neue Formen Default line width - + Standard-Linienbreite The default line thickness for new shapes - + Der Standard-Liniendicke für neue Formen px - + px Default vertex color - + Standard-Scheitelpunktfarbe Default vertex size - + Standard-Scheitelpunktgröße Bounding box color - + Rahmenfarbe The color of bounding boxes in the 3D view - + Farbe der Bounding box in der 3D Ansicht @@ -2447,7 +2447,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Vertex/Edge/Wire/Face - + Scheitelpunkt/Kante/Draht/Fläche @@ -2463,7 +2463,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. At least two vertices, edges, wires or faces are required. - + Es werden mindestens 2 Ecken,Linien oder Flächen benötigt. @@ -2593,7 +2593,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Select three or more vertices - + Wählen Sie mindestens drei Eckpunkte @@ -2618,7 +2618,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Select a list of vertices - + Wählen Sie eine Liste der Eckpunkte @@ -2652,7 +2652,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Vertex/Edge/Wire/Face - + Scheitelpunkt/Kante/Draht/Fläche @@ -2668,7 +2668,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Select one or more connected edges you want to sweep along. - + Wählen Sie eine oder mehrere verbundene Kanten, entlang derer Sie austragen möchten. @@ -2688,7 +2688,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. '%1' cannot be used as profile and path. - + '%1' kann nicht als Profil und Pfad verwendet werden. @@ -2698,18 +2698,18 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Done - Done + Fertig Select one or more connected edges in the 3d view and press 'Done' - + Wählen Sie eine oder mehrere verbundene Kanten in der 3D Ansicht und klicken Sie auf 'Fertig' The selected sweep path is invalid. - + Der ausgewählte Sweep-Pfad ist ungültig. @@ -2717,7 +2717,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Shape Content - + Form Inhalt @@ -2916,7 +2916,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Box selection - + Recktecksauswahl @@ -2975,7 +2975,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Closed - + Geschlossen @@ -2994,7 +2994,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Skin - Skin + Oberfläche @@ -3004,12 +3004,12 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. RectoVerso - RectoVerso + Hinten-Vorne Join type - Join type + Verknüpfungstyp @@ -3030,7 +3030,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Self-intersection - Self-intersection + Selbstdurchdringung @@ -3064,7 +3064,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Face from vertices - + Fläche aus Vertices @@ -3079,7 +3079,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Shell from faces - Hülle aus Oberflächen + Hüllkörper aus Oberflächen @@ -3107,7 +3107,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Sweep Path - + Pfad der Austragung @@ -3123,7 +3123,7 @@ Bitte wählen Sie eine gültige Form im Dropdown-Feld. Select one or more profiles and select an edge or wire in the 3D view for the sweep path. - Wählen Sie ein oder mehrere Profile und wählen Sie eine Kante oder Draht in der 3D Ansicht als Sweep-Pfad. + Fügen Sie ein oder mehrere Profile zum Sweep hinzu. Markieren Sie dann eine Ecke oder einen Draht in der 3D Ansicht als Sweep Pfad. @@ -3138,12 +3138,12 @@ in the 3D view for the sweep path. Select faces of the source object and press 'Done' - Select faces of the source object and press 'Done' + Wählen Sie Flächen des Quellobjekts und drücken Sie 'Fertig' Done - Done + Fertig @@ -3174,7 +3174,7 @@ in the 3D view for the sweep path. Non-solids selected - + Kein Vollkörper ausgewählt @@ -3182,7 +3182,7 @@ in the 3D view for the sweep path. The use of non-solids for boolean operations may lead to unexpected results. Do you want to continue? - + Die Verwendung von nicht-Vollkörpern für Boolesche Operationen kann zu unerwarteten Ergebnissen führen. Möchten Sie fortfahren? @@ -3253,12 +3253,12 @@ Do you want to continue? Import-Export - + Import / Export Display - + Anzeige @@ -3285,22 +3285,22 @@ Do you want to continue? Compound - Compound + Zusammengesetzt Compound Solid - Compound Solid + Zusammengesetzter Volumenkörper Solid - Solid + Volumenkörper Shell - Shell + Hüllkörper @@ -3335,12 +3335,12 @@ Do you want to continue? Invalid Point On Curve - Invalid Point On Curve + Ungültiger Punkt auf Kurve Invalid Point On Curve On Surface - Invalid Point On Curve On Surface + Ungültiger Punkt auf der Kurve auf der Oberfläche @@ -3380,17 +3380,17 @@ Do you want to continue? Invalid Same Range Flag - Invalid Same Range Flag + Ungültiges Merkmal Gleicher Bereich (Same Range Flag) Invalid Same Parameter Flag - Invalid Same Parameter Flag + Ungültiges Merkmal Gleicher Parameter (Same Parameter Flag) Invalid Degenerated Flag - Invalid Degenerated Flag + Ungültiges Merkmal Entartet (Degenerated Flag) @@ -3400,17 +3400,17 @@ Do you want to continue? Invalid MultiConnexity - Invalid MultiConnexity + Ungültige MehrfachVerbindung Invalid Range - Invalid Range + Ungültiger Bereich Empty Wire - Empty Wire + Leeres Drahtmodell @@ -3420,7 +3420,7 @@ Do you want to continue? Self Intersecting Wire - Self Intersecting Wire + Selbstdurchdringendes Drahtmodell @@ -3435,7 +3435,7 @@ Do you want to continue? Redundant Wire - Redundant Wire + Redundantes Drahtmodell @@ -3445,12 +3445,12 @@ Do you want to continue? Invalid Imbrication Of Wires - Invalid Imbrication Of Wires + Ungültige Verwicklung im Drahtmodell Empty Shell - Empty Shell + Leerer Hüllkörper @@ -3490,7 +3490,7 @@ Do you want to continue? Invalid Tolerance Value - Invalid Tolerance Value + Ungültiger Toleranzwert @@ -3505,62 +3505,62 @@ Do you want to continue? Out Of Enum Range: - Out Of Enum Range: + Außerhalb des Bereichs der Enum: BOPAlgo CheckUnknown - + BOPAlgo ÜberprüfungUnbekannt BOPAlgo BadType - + BOPAlgo FalscherTyp BOPAlgo SelfIntersect - + BOPAlgo SelfIntersect BOPAlgo TooSmallEdge - + BOPAlgo ZuKleineKante BOPAlgo NonRecoverableFace - + BOPAlgo NichtWiederherstellbareFläche BOPAlgo IncompatibilityOfVertex - + BOPAlgo InkompatibilitätDesScheitelpunktes BOPAlgo IncompatibilityOfEdge - + BOPAlgo InkompatibilitätDerKante BOPAlgo IncompatibilityOfFace - + BOPAlgo InkompatibilitätDerFläche BOPAlgo OperationAborted - + BOPAlgo OperationAbgebrochen BOPAlgo GeomAbs_C0 - + BOPAlgo GeomAbs_C0 BOPAlgo NotValid - + BOPAlgo NichtGültig @@ -3572,7 +3572,7 @@ Do you want to continue? Selections - + Auswahl @@ -3583,22 +3583,22 @@ Do you want to continue? Reset Dialog - + Dialog zurücksetzen Toggle 3d - + 3D umschalten Toggle Delta - + Delta umschalten Clear All - + Alles löschen @@ -3626,7 +3626,7 @@ Do you want to continue? Solids - Festkörper + Volumenkörper diff --git a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.qm b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.qm index d3a6c4d048..5db91809cd 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.qm and b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts index 7a38bcd572..c6e16dcb46 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts @@ -6,7 +6,7 @@ Block definition - Bloque de definición + Definición de bloque @@ -41,25 +41,25 @@ Up to next - Cerca del siguiente + Hasta el siguiente Up to last - Cerca del último + Hasta el último Up to plane - Cerca del plano + Hasta el plano Up to face - Cerca de la cara + Hasta la cara @@ -78,7 +78,7 @@ Profile - Perfil + Perfíl @@ -283,7 +283,7 @@ Create a cube solid - Crear un cubo macizo + Crear un cubo sólido Box @@ -363,7 +363,7 @@ Chamfer the selected edges of a shape - crea un Chaflan en las aristas seleccionadas de una forma + Crea un Chaflán en las aristas seleccionadas de una figura @@ -437,7 +437,7 @@ Cross-sections - secciones transversales + Cortes transversales @@ -583,7 +583,7 @@ Import curve network... - Importa una red de curvas... + Importa red de curvas... @@ -596,12 +596,12 @@ Loft... - Loft... + Proyección... Utility to loft - Utilidad para loft + Crear proyección Advanced utility to lofts @@ -623,7 +623,7 @@ Create solid from a shell or compound - Crear sólidos desde un shell o un compuesto + Crear sólido desde un shell o un compuesto @@ -654,7 +654,7 @@ Offset... - Desplazamiento... + Separación... @@ -672,7 +672,7 @@ Pick curve network - Designe una red de curvas + Designa una red de curvas @@ -863,7 +863,7 @@ Sphere - Esféra + Esfera @@ -881,7 +881,7 @@ Utility to sweep - Utilidad para barrido + Crear barrido @@ -1219,11 +1219,7 @@ Succeeded - - - - Suceeded - Hecho + Éxito @@ -1238,7 +1234,7 @@ Fillet Edges - Redondear bordes + Redondear aristas @@ -1324,7 +1320,7 @@ Edges to fillet - Bordes a redondear + Aristas a redondear @@ -1356,8 +1352,8 @@ No edge entity is checked to fillet. Please check one or more edge entities first. - Ninguna entidad de borde está marcada para redondear. -Por favor seleccione una o más entidades de borde primero. + No se ha seleccionado ninguna arista +Por favor selecciona primero una o más aristas. @@ -1392,7 +1388,7 @@ Please select a valid shape in the drop-down box first. IGES - + IGES @@ -1402,7 +1398,7 @@ Please select a valid shape in the drop-down box first. Units for export of IGES - + Unidades en las que exportar el IGES @@ -1422,37 +1418,37 @@ Please select a valid shape in the drop-down box first. Enable B-REP mode - + Activar el modo B-REP Import - + Importar Skip blank entities - + Saltar campos vacíos Header - + Título Company - + Organización Product - + Producto Author - + Autor @@ -1460,7 +1456,7 @@ Please select a valid shape in the drop-down box first. STEP - + STEP @@ -1470,7 +1466,7 @@ Please select a valid shape in the drop-down box first. Units for export of STEP - + Unidades en las que exportar el STEP @@ -1490,27 +1486,27 @@ Please select a valid shape in the drop-down box first. Scheme - + Esquema Header - + Título Company - + Organización Author - + Autor Product - + Producto @@ -1855,7 +1851,7 @@ Please select a valid shape in the drop-down box first. Sphere - Esféra + Esfera @@ -1964,28 +1960,28 @@ Please select a valid shape in the drop-down box first. U parameter: - + Parámetro U: V parameters: - + Parámetros V: Radius 3: - Radio 2: {3:?} + Radio 3: V parameter: - + Parámetro V: U Parameter: - + Parámetro U: U parametric: @@ -2050,7 +2046,7 @@ Please select a valid shape in the drop-down box first. Growth: - Growth: + Evolución: @@ -2126,13 +2122,13 @@ Please select a valid shape in the drop-down box first. Pitch: - Tono: + Paso: Helix - Hélice + Espiral 3D View @@ -2401,12 +2397,12 @@ Please select a valid shape in the drop-down box first. Bounding box color - Bounding box color + Color del cuadro delimitador The color of bounding boxes in the 3D view - The color of bounding boxes in the 3D view + El color de los cuadros delimitadores en la vista 3D @@ -2456,7 +2452,7 @@ Please select a valid shape in the drop-down box first. Loft - Loft + Proyección @@ -2596,7 +2592,7 @@ Please select a valid shape in the drop-down box first. Select three or more vertices - + Seleccione tres o más vértices @@ -2621,7 +2617,7 @@ Please select a valid shape in the drop-down box first. Select a list of vertices - + Selecciona una lista de vértices @@ -2671,7 +2667,7 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges you want to sweep along. - + Seleccione uno o más vértices conectados como trayectoria para el barrido. @@ -2691,7 +2687,7 @@ Please select a valid shape in the drop-down box first. '%1' cannot be used as profile and path. - '%1' no puede usarse como perfil y trajectoria. + '%1' no puede usarse como perfil y trayectoria. @@ -2706,13 +2702,13 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges in the 3d view and press 'Done' - + Seleccione uno o más vértices conectados en la vista 3d y pulse 'Hecho' The selected sweep path is invalid. - + Trayectoria no válida para el barrido. @@ -2927,7 +2923,7 @@ Please select a valid shape in the drop-down box first. Loft - Loft + Proyección Vertex/Wire @@ -3067,7 +3063,7 @@ Please select a valid shape in the drop-down box first. Face from vertices - + Cara desde vértices @@ -3110,7 +3106,7 @@ Please select a valid shape in the drop-down box first. Sweep Path - + Trayectoria del barrido @@ -3120,7 +3116,7 @@ Please select a valid shape in the drop-down box first. Frenet - Frenet + Ángulo fijo @@ -3257,7 +3253,7 @@ Do you want to continue? Import-Export - + Importar/Exportar diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fi.qm b/src/Mod/Part/Gui/Resources/translations/Part_fi.qm index 195f02ae95..2f8e0caa3c 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_fi.qm and b/src/Mod/Part/Gui/Resources/translations/Part_fi.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fi.ts b/src/Mod/Part/Gui/Resources/translations/Part_fi.ts index 8979d68c72..adb1658ccf 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fi.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fi.ts @@ -175,7 +175,7 @@ Measure Angular - Measure Angular + Mittaa kulma @@ -189,7 +189,7 @@ Clear All - Clear All + Tyhjennä kaikki @@ -203,7 +203,7 @@ Measure Linear - Measure Linear + Mittaa lineaarisesti @@ -217,7 +217,7 @@ Toggle 3d - Toggle 3d + Vaihda 3d @@ -231,7 +231,7 @@ Toggle All - Toggle All + Vaihda kaikki @@ -245,7 +245,7 @@ Toggle Delta - Toggle Delta + Vaihda Delta @@ -283,7 +283,7 @@ Create a cube solid - Create a cube solid + Luo kiinteä kuutio Box @@ -394,12 +394,12 @@ Make compound - Make compound + Tee yhdistelmäkuvio Make a compound of several shapes - Make a compound of several shapes + Tehdä yhdistelmäkuvio useasta muodosta @@ -767,7 +767,7 @@ Create a ruled surface from either two Edges or two wires - Create a ruled surface from either two Edges or two wires + Luoda ohjattu pinta joko kahdesta reunasta tai kahdesta linjasta Create a ruled surface from two curves @@ -1219,18 +1219,14 @@ Succeeded - - - - Suceeded - Suceeded + Onnistui Failed - Failed + Epäonnistui @@ -1253,12 +1249,12 @@ Select faces - Select faces + Valitse pinnat Select edges - Select edges + Valitse reunat @@ -1298,12 +1294,12 @@ Constant Length - Constant Length + Vakiopituus Variable Length - Variable Length + Muuttuva pituus @@ -1314,12 +1310,12 @@ Start length - Start length + Aloituspituus End length - End length + Lopetuspituus @@ -1393,7 +1389,7 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. IGES - + IGES @@ -1403,7 +1399,7 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. Units for export of IGES - + Yksiköt IGES vietäväksi @@ -1423,37 +1419,37 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. Enable B-REP mode - + B-REP tila Import - + Tuonti Skip blank entities - + Ohita tyhjät kohteet Header - + Otsikko Company - + Yritys Product - + Tuote Author - + Kehittäjä @@ -1461,7 +1457,7 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. STEP - + ASKEL @@ -1471,7 +1467,7 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. Units for export of STEP - + Yksiköt ASKEL-vientiin @@ -1491,27 +1487,27 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. Scheme - + Kaavio Header - + Otsikko Company - + Yritys Author - + Kehittäjä Product - + Tuote @@ -1874,13 +1870,13 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. Prism - Prism + Prisma Spiral - Spiral + Kierre @@ -1903,7 +1899,7 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. Regular polygon - Regular polygon + Säännöllinen monikulmio @@ -1965,28 +1961,28 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. U parameter: - + U muuttuja: V parameters: - + V muuttujat: Radius 3: - Säde 2: {3:?} + Säde 3: V parameter: - + V muuttuja: U Parameter: - + U muuttuja: U parametric: @@ -2000,13 +1996,13 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. Polygon: - Polygon: + Monikulmio: Circumradius: - Circumradius: + Kehäsäde: @@ -2051,12 +2047,12 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. Growth: - Growth: + Kasvu: Number of rotations: - Number of rotations: + Kierrosten lukumäärä: @@ -2185,7 +2181,7 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. Create Solid - Create Solid + Luo kiinteä @@ -2321,17 +2317,17 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. Automatically refine model after sketch-based operation - Automatically refine model after sketch-based operation + Automaattisesti tarkenna malli, kun luonnokseen perustuva toiminto on tehty Object naming - Object naming + Kohteen nimeäminen Add name of base object - Add name of base object + Lisää peruskohteelle nimi @@ -2344,22 +2340,22 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. Part colors - Part colors + Osan värit Default Part colors - Default Part colors + Osan oletusvärit Default shape color - Default shape color + Muodon oletusväri The default color for new shapes - The default color for new shapes + Uusien muotojen oletusväri @@ -2370,18 +2366,18 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. The default line color for new shapes - The default line color for new shapes + Uusien muotojen viivojen oletusväri Default line width - Default line width + Oletusarvo viivan leveydelle The default line thickness for new shapes - The default line thickness for new shapes + Uusien muotojen viivojen oletuspaksuus @@ -2392,22 +2388,22 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. Default vertex color - Default vertex color + Päätepisteen oletusväri Default vertex size - Default vertex size + Päätepisteen oletuskoko Bounding box color - Bounding box color + Rajaavan ruudun väri The color of bounding boxes in the 3D view - The color of bounding boxes in the 3D view + Rajaavien ruutujen oletusväri 3D näkymässä @@ -2451,7 +2447,7 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. Vertex/Edge/Wire/Face - Vertex/Edge/Wire/Face + Loppupiste/reuna/linja/näyttöpinta @@ -2467,7 +2463,7 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. At least two vertices, edges, wires or faces are required. - At least two vertices, edges, wires or faces are required. + On oltava vähintään kaksi pistettä, reunaa, linjaa tai näyttöpintaa. @@ -2597,7 +2593,7 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. Select three or more vertices - + Valitse vähintään kolme kärkipistettä @@ -2622,7 +2618,7 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. Select a list of vertices - + Valitse luettelo kärkipisteitä @@ -2656,7 +2652,7 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. Vertex/Edge/Wire/Face - Vertex/Edge/Wire/Face + Loppupiste/reuna/linja/näyttöpinta @@ -2672,7 +2668,7 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. Select one or more connected edges you want to sweep along. - + Valitse vähintään yksi yhdistettyjä reunoja, joita pitkin haluat pyyhkäistä. @@ -2692,7 +2688,7 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. '%1' cannot be used as profile and path. - '%1' cannot be used as profile and path. + '%1' ei voi käyttää profiilina ja kansiona. @@ -2707,13 +2703,13 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. Select one or more connected edges in the 3d view and press 'Done' - + Valitse yhdistettyjä reunoja vähintään yksi 3d -näkymässä ja paina 'Valmis' The selected sweep path is invalid. - + Valittu pyyhkäisykansio ei kelpaa. @@ -2721,7 +2717,7 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. Shape Content - Shape Content + Muoto sisältö @@ -3068,7 +3064,7 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. Face from vertices - + Näkymäpinta kärkipisteistä @@ -3111,7 +3107,7 @@ Ole hyvä ja valitse kelvollinen muoto alas veto laatikosta. Sweep Path - + Pyyhi kansio @@ -3178,7 +3174,7 @@ in the 3D view for the sweep path. Non-solids selected - Non-solids selected + Ei-kiinteät valittu @@ -3186,8 +3182,8 @@ in the 3D view for the sweep path. The use of non-solids for boolean operations may lead to unexpected results. Do you want to continue? - The use of non-solids for boolean operations may lead to unexpected results. -Do you want to continue? + Ei-kiinteiden kohteiden käyttö voi Boolean laskutoimituksilla aiheuttaa odottamattomia tuloksia. +Haluatko jatkaa? @@ -3258,7 +3254,7 @@ Do you want to continue? Import-Export - + Tuo/Vie @@ -3515,47 +3511,47 @@ Do you want to continue? BOPAlgo CheckUnknown - BOPAlgo CheckUnknown + BOPAlgo TarkistusTuntematon BOPAlgo BadType - BOPAlgo BadType + BOPAlgo VääräTyyppi BOPAlgo SelfIntersect - BOPAlgo SelfIntersect + BOPAlgo Itseleikkaus BOPAlgo TooSmallEdge - BOPAlgo TooSmallEdge + BOPAlgo LiianPieniReuna BOPAlgo NonRecoverableFace - BOPAlgo NonRecoverableFace + BOPAlgo EiPalautettavaNäkymä BOPAlgo IncompatibilityOfVertex - BOPAlgo IncompatibilityOfVertex + BOPAlgo PäätepisteenSopimattomuus BOPAlgo IncompatibilityOfEdge - BOPAlgo IncompatibilityOfEdge + BOPAlgo ReunanSopimattomuus BOPAlgo IncompatibilityOfFace - BOPAlgo IncompatibilityOfFace + BOPAlgo NäkymänSopimattomuus BOPAlgo OperationAborted - BOPAlgo OperationAborted + BOPAlgo ToimintoKeskeytetty @@ -3565,7 +3561,7 @@ Do you want to continue? BOPAlgo NotValid - BOPAlgo NotValid + BOPAlgo EiKelvollinen @@ -3577,7 +3573,7 @@ Do you want to continue? Selections - Selections + Valinnat @@ -3588,22 +3584,22 @@ Do you want to continue? Reset Dialog - Reset Dialog + Palauta valintaikkuna Toggle 3d - Toggle 3d + Vaihda 3d Toggle Delta - Toggle Delta + Vaihda Delta Clear All - Clear All + Tyhjennä kaikki diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fr.qm b/src/Mod/Part/Gui/Resources/translations/Part_fr.qm index 3c8aee57c3..dffa0bf331 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_fr.qm and b/src/Mod/Part/Gui/Resources/translations/Part_fr.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts index d8b8e5ae7c..2a0f4a6581 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts @@ -1219,11 +1219,7 @@ Succeeded - - - - Suceeded - Succès + Réussi @@ -1314,12 +1310,12 @@ Start length - Longueur au départ + Longueur de départ End length - Longueur à la fin + Longueur finale @@ -1391,7 +1387,7 @@ Please select a valid shape in the drop-down box first. IGES - + IGES @@ -1401,7 +1397,7 @@ Please select a valid shape in the drop-down box first. Units for export of IGES - + Unités pour l'exportation vers IGES @@ -1421,37 +1417,37 @@ Please select a valid shape in the drop-down box first. Enable B-REP mode - + Activer le mode B-REP Import - + Importation Skip blank entities - + Passer les entités vides Header - + En-tête Company - + Société Product - + Produit Author - + Auteur @@ -1459,7 +1455,7 @@ Please select a valid shape in the drop-down box first. STEP - + STEP @@ -1469,7 +1465,7 @@ Please select a valid shape in the drop-down box first. Units for export of STEP - + Unités pour l'exportation vers STEP @@ -1489,27 +1485,27 @@ Please select a valid shape in the drop-down box first. Scheme - + Schéma Header - + En-tête Company - + Société Author - + Auteur Product - + Produit @@ -1963,28 +1959,28 @@ Please select a valid shape in the drop-down box first. U parameter: - + Paramètre U : V parameters: - + Paramètres V : Radius 3: - Rayon 2 : {3:?} + Rayon 3 : V parameter: - + Paramètre V : U Parameter: - + Paramètre U : U parametric: @@ -2347,7 +2343,7 @@ Please select a valid shape in the drop-down box first. Default Part colors - Couleurs des pièces par défaut + Couleurs de pièces par défaut @@ -2595,7 +2591,7 @@ Please select a valid shape in the drop-down box first. Select three or more vertices - + Sélectionnez au moins trois sommets @@ -2620,7 +2616,7 @@ Please select a valid shape in the drop-down box first. Select a list of vertices - + Sélectionnez une liste de sommets @@ -2670,7 +2666,7 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges you want to sweep along. - + Sélectionnez une ou plusieurs arêtes connectés le long desquels passe le balayage. @@ -2705,13 +2701,13 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges in the 3d view and press 'Done' - + Sélectionnez une ou plusieurs arêtes connectées dans la vue 3d et appuyez sur « Fait » The selected sweep path is invalid. - + Le chemin de balayage sélectionné n'est pas valide. @@ -3066,7 +3062,7 @@ Please select a valid shape in the drop-down box first. Face from vertices - + Face depuis des sommets @@ -3109,7 +3105,7 @@ Please select a valid shape in the drop-down box first. Sweep Path - + Chemin de balayage @@ -3256,7 +3252,7 @@ Voulez-vous continuer ? Import-Export - + Import-Export diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hr.qm b/src/Mod/Part/Gui/Resources/translations/Part_hr.qm index b792db6e83..c3fd9cd240 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_hr.qm and b/src/Mod/Part/Gui/Resources/translations/Part_hr.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hr.ts b/src/Mod/Part/Gui/Resources/translations/Part_hr.ts index 6d94b186b2..e0802169ba 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_hr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_hr.ts @@ -1219,11 +1219,7 @@ Succeeded - - - - Suceeded - Suceeded + Succeeded @@ -1391,7 +1387,7 @@ Please select a valid shape in the drop-down box first. IGES - + IGES @@ -1401,7 +1397,7 @@ Please select a valid shape in the drop-down box first. Units for export of IGES - + Units for export of IGES @@ -1421,37 +1417,37 @@ Please select a valid shape in the drop-down box first. Enable B-REP mode - + Enable B-REP mode Import - + Import Skip blank entities - + Skip blank entities Header - + Header Company - + Company Product - + Product Author - + Author @@ -1459,7 +1455,7 @@ Please select a valid shape in the drop-down box first. STEP - + STEP @@ -1469,7 +1465,7 @@ Please select a valid shape in the drop-down box first. Units for export of STEP - + Units for export of STEP @@ -1489,27 +1485,27 @@ Please select a valid shape in the drop-down box first. Scheme - + Scheme Header - + Header Company - + Company Author - + Author Product - + Product @@ -1963,28 +1959,28 @@ Please select a valid shape in the drop-down box first. U parameter: - + U parameter: V parameters: - + V parameters: Radius 3: - Polumjer 2: {3:?} + Radius 3: V parameter: - + V parameter: U Parameter: - + U Parameter: U parametric: @@ -2595,7 +2591,7 @@ Please select a valid shape in the drop-down box first. Select three or more vertices - + Select three or more vertices @@ -2620,7 +2616,7 @@ Please select a valid shape in the drop-down box first. Select a list of vertices - + Select a list of vertices @@ -2670,7 +2666,7 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges you want to sweep along. - + Select one or more connected edges you want to sweep along. @@ -2705,13 +2701,13 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges in the 3d view and press 'Done' - + Select one or more connected edges in the 3d view and press 'Done' The selected sweep path is invalid. - + The selected sweep path is invalid. @@ -3066,7 +3062,7 @@ Please select a valid shape in the drop-down box first. Face from vertices - + Face from vertices @@ -3109,7 +3105,7 @@ Please select a valid shape in the drop-down box first. Sweep Path - + Sweep Path @@ -3257,7 +3253,7 @@ Do you want to continue? Import-Export - + Import-Export diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hu.qm b/src/Mod/Part/Gui/Resources/translations/Part_hu.qm index cd691d389b..4e8cf635bf 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_hu.qm and b/src/Mod/Part/Gui/Resources/translations/Part_hu.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts index 244749766b..5b887e48a6 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts @@ -1219,11 +1219,7 @@ Succeeded - - - - Suceeded - Suceeded + Succeeded @@ -1392,7 +1388,7 @@ Please select a valid shape in the drop-down box first. IGES - + IGES @@ -1402,7 +1398,7 @@ Please select a valid shape in the drop-down box first. Units for export of IGES - + Units for export of IGES @@ -1422,37 +1418,37 @@ Please select a valid shape in the drop-down box first. Enable B-REP mode - + Enable B-REP mode Import - + Importálás Skip blank entities - + Skip blank entities Header - + Header Company - + Company Product - + Product Author - + Author @@ -1460,7 +1456,7 @@ Please select a valid shape in the drop-down box first. STEP - + STEP @@ -1470,7 +1466,7 @@ Please select a valid shape in the drop-down box first. Units for export of STEP - + Units for export of STEP @@ -1490,27 +1486,27 @@ Please select a valid shape in the drop-down box first. Scheme - + Scheme Header - + Header Company - + Company Author - + Author Product - + Product @@ -1964,28 +1960,28 @@ Please select a valid shape in the drop-down box first. U parameter: - + U parameter: V parameters: - + V parameters: Radius 3: - Sugár 2: {3:?} + Radius 3: V parameter: - + V parameter: U Parameter: - + U Parameter: U parametric: @@ -2375,7 +2371,7 @@ de szebb végeredményt ad.</p></body></html> Default line width - Default line width + Alapértelmezett vonalvastagság @@ -2597,7 +2593,7 @@ de szebb végeredményt ad.</p></body></html> Select three or more vertices - + Select three or more vertices @@ -2622,7 +2618,7 @@ de szebb végeredményt ad.</p></body></html> Select a list of vertices - + Select a list of vertices @@ -2672,7 +2668,7 @@ de szebb végeredményt ad.</p></body></html> Select one or more connected edges you want to sweep along. - + Select one or more connected edges you want to sweep along. @@ -2707,13 +2703,13 @@ de szebb végeredményt ad.</p></body></html> Select one or more connected edges in the 3d view and press 'Done' - + Select one or more connected edges in the 3d view and press 'Done' The selected sweep path is invalid. - + The selected sweep path is invalid. @@ -3068,7 +3064,7 @@ de szebb végeredményt ad.</p></body></html> Face from vertices - + Face from vertices @@ -3111,7 +3107,7 @@ de szebb végeredményt ad.</p></body></html> Sweep Path - + Sweep Path @@ -3258,7 +3254,7 @@ Do you want to continue? Import-Export - + Import-Export diff --git a/src/Mod/Part/Gui/Resources/translations/Part_it.qm b/src/Mod/Part/Gui/Resources/translations/Part_it.qm index 40a4e697ac..422e836549 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_it.qm and b/src/Mod/Part/Gui/Resources/translations/Part_it.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_it.ts b/src/Mod/Part/Gui/Resources/translations/Part_it.ts index 76c25b9764..3cb5557b9a 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_it.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_it.ts @@ -529,7 +529,7 @@ Fillet the selected edges of a shape - Raccorda gli spigoli di una forma selezionati + Raccorda gli spigoli selezionati in una forma @@ -605,7 +605,7 @@ Advanced utility to lofts - Utilità avanzate per lofts + Utilità avanzate per loft @@ -708,12 +708,12 @@ Refine shape - Affinare una forma + Affina una forma Refine the copy of a shape - Affinare la copia di una forma + Affina la copia di una forma @@ -1219,11 +1219,7 @@ Succeeded - - - - Suceeded - Riuscito + Riuscito @@ -1356,8 +1352,8 @@ No edge entity is checked to fillet. Please check one or more edge entities first. - Nessuna entità spigolo è stata assegnata da raccordare. -Assegnare una o più entità raccordo prima. + Non è stata selezionata nessuna entità spigolo da raccordare. +Selezionare prima uno o più spigoli. @@ -1393,7 +1389,7 @@ Seleziona prima una forma valida dal menu a tendina. IGES - + IGES @@ -1403,7 +1399,7 @@ Seleziona prima una forma valida dal menu a tendina. Units for export of IGES - + Unità per l'esportazione IGES @@ -1423,37 +1419,37 @@ Seleziona prima una forma valida dal menu a tendina. Enable B-REP mode - + Abilitare la modalità B-REP Import - + Importa Skip blank entities - + Saltare le entità vuote Header - + Intestazione Company - + Azienda Product - + Prodotto Author - + Autore @@ -1461,7 +1457,7 @@ Seleziona prima una forma valida dal menu a tendina. STEP - + STEP @@ -1471,7 +1467,7 @@ Seleziona prima una forma valida dal menu a tendina. Units for export of STEP - + Unità per l'esportazione STEP @@ -1491,27 +1487,27 @@ Seleziona prima una forma valida dal menu a tendina. Scheme - + Schema Header - + Intestazione Company - + Azienda Author - + Autore Product - + Prodotto @@ -1965,28 +1961,28 @@ Seleziona prima una forma valida dal menu a tendina. U parameter: - + Parametro U: V parameters: - + Parametri V: Radius 3: - Raggio 2: {3:?} + Raggio 3: V parameter: - + Parametro V: U Parameter: - + Parametro U: U parametric: @@ -2208,7 +2204,7 @@ Seleziona prima una forma valida dal menu a tendina. Using high-quality normals - Usare normali di alta qualità + Usa normali di alta qualità @@ -2349,7 +2345,7 @@ Seleziona prima una forma valida dal menu a tendina. Default Part colors - Color della parte predefiniti + Colori della parte predefiniti @@ -2462,7 +2458,7 @@ Seleziona prima una forma valida dal menu a tendina. Too few elements - Troppo pochi elementi + Elementi insufficienti @@ -2597,7 +2593,7 @@ Seleziona prima una forma valida dal menu a tendina. Select three or more vertices - + Selezionare tre o più vertici @@ -2622,7 +2618,7 @@ Seleziona prima una forma valida dal menu a tendina. Select a list of vertices - + Selezionare un elenco di vertici @@ -2672,12 +2668,12 @@ Seleziona prima una forma valida dal menu a tendina. Select one or more connected edges you want to sweep along. - + Selezionare uno o più bordi collegati lungo i quali eseguire sweep. Too few elements - Troppo pochi elementi + Elementi insufficienti @@ -2707,13 +2703,13 @@ Seleziona prima una forma valida dal menu a tendina. Select one or more connected edges in the 3d view and press 'Done' - + Selezionare uno o più spigoli connessi nella vista 3d e poi premere 'Fatto' The selected sweep path is invalid. - + Il percorso sweep selezionato non è valido. @@ -2940,7 +2936,7 @@ Seleziona prima una forma valida dal menu a tendina. <b>Move the selected item one level down.</b><p>This will also change the level of the parent item.</p> - <b>Sposta l'elemento selezionato un livello in basso.</b><p>Questo cambierà anche il livello degli elementi padre.</p> + <b>Sposta l'elemento selezionato un livello in basso.</b><p>Questo cambierà anche il livello degli elementi genitore.</p> Move left @@ -2948,15 +2944,15 @@ Seleziona prima una forma valida dal menu a tendina. <b>Move the selected item one level up.</b><p>This will also change the level of the parent item.</p> - <b>Sposta l'elemento selezionato un livello in alto.</b><p>Questo cambierà anche il livello degli elementi padre.</p> + <b>Sposta l'elemento selezionato un livello in alto.</b><p>Questo cambierà anche il livello degli elementi genitore.</p> Move up - Spostare verso l'alto + Sposta verso l'alto <b>Move the selected item up.</b><p>The item will be moved within the hierarchy level.</p> - <b>Sposta l'elemento selezionato in alto.</b><p>L'elemento verrà spostato all'interno del livello di gerarchia.</p> + <b>Sposta in alto l'elemento selezionato.</b><p>L'elemento verrà spostato all'interno del livello di gerarchia.</p> Move down @@ -3068,7 +3064,7 @@ Seleziona prima una forma valida dal menu a tendina. Face from vertices - + Faccia da vertici @@ -3111,7 +3107,7 @@ Seleziona prima una forma valida dal menu a tendina. Sweep Path - + Percorso Sweep @@ -3257,7 +3253,7 @@ Do you want to continue? Import-Export - + Importa/Esporta diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ja.qm b/src/Mod/Part/Gui/Resources/translations/Part_ja.qm index 74aab7a688..cc29b105af 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_ja.qm and b/src/Mod/Part/Gui/Resources/translations/Part_ja.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts index 0ac2de8518..81cdffca27 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts @@ -596,12 +596,12 @@ Loft... - 屋根型... + ロフト... Utility to loft - 屋根型ユーティリティ + ロフトユーティリティ Advanced utility to lofts @@ -876,12 +876,12 @@ Sweep... - 掃引... + スイープ... Utility to sweep - 掃引ユーティリティ + スイープユーティリティ @@ -1219,11 +1219,7 @@ Succeeded - - - - Suceeded - 完了 + 正常終了 @@ -1298,12 +1294,12 @@ Constant Length - Constant Length + 一定長さ Variable Length - Variable Length + 可変長さ @@ -1314,12 +1310,12 @@ Start length - Start length + 開始長さ End length - End length + 終了長さ @@ -1393,7 +1389,7 @@ Please select a valid shape in the drop-down box first. IGES - + IGES @@ -1403,7 +1399,7 @@ Please select a valid shape in the drop-down box first. Units for export of IGES - + IGESエクスポート時の単位 @@ -1423,37 +1419,37 @@ Please select a valid shape in the drop-down box first. Enable B-REP mode - + B-REPモードを有効化 Import - + インポート Skip blank entities - + 空のエンティティをスキップ Header - + ヘッダー Company - + 会社 Product - + 製品 Author - + 作成者 @@ -1461,7 +1457,7 @@ Please select a valid shape in the drop-down box first. STEP - + STEP @@ -1471,7 +1467,7 @@ Please select a valid shape in the drop-down box first. Units for export of STEP - + STEPエクスポート時の単位 @@ -1491,27 +1487,27 @@ Please select a valid shape in the drop-down box first. Scheme - + スキーム Header - + ヘッダー Company - + 会社 Author - + 作成者 Product - + 製品 @@ -1965,28 +1961,28 @@ Please select a valid shape in the drop-down box first. U parameter: - + Uパラメーター: V parameters: - + Vパラメーター: Radius 3: - 半径 2: {3:?} + 半径 3: V parameter: - + Vパラメーター: U Parameter: - + Uパラメーター: U parametric: @@ -2321,17 +2317,17 @@ Please select a valid shape in the drop-down box first. Automatically refine model after sketch-based operation - Automatically refine model after sketch-based operation + スケッチ ベースの操作の後に自動でモデルを高精度化 Object naming - Object naming + オブジェクトに名前をつける Add name of base object - Add name of base object + ベース オブジェクトの名前を追加 @@ -2375,7 +2371,7 @@ Please select a valid shape in the drop-down box first. Default line width - Default line width + 既定の線幅 @@ -2597,7 +2593,7 @@ Please select a valid shape in the drop-down box first. Select three or more vertices - + 3 つ以上の頂点を選択 @@ -2622,7 +2618,7 @@ Please select a valid shape in the drop-down box first. Select a list of vertices - + 頂点リストを選択 @@ -2672,7 +2668,7 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges you want to sweep along. - + スイープ経路にしたい接続エッジを1つまたは複数選択してください @@ -2707,13 +2703,13 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges in the 3d view and press 'Done' - + 3Dビューで1つまたは複数の接続エッジを選択して「Done」を押してください The selected sweep path is invalid. - + 選択されたスイープ経路が正しくありません。 @@ -2721,7 +2717,7 @@ Please select a valid shape in the drop-down box first. Shape Content - Shape Content + シェイプのコンテンツ @@ -3068,7 +3064,7 @@ Please select a valid shape in the drop-down box first. Face from vertices - + 幾つかの頂点から面にする。 @@ -3111,7 +3107,7 @@ Please select a valid shape in the drop-down box first. Sweep Path - + スイープ経路 @@ -3258,7 +3254,7 @@ Do you want to continue? Import-Export - + インポート/エクスポート @@ -3515,57 +3511,58 @@ Do you want to continue? BOPAlgo CheckUnknown - BOPAlgo CheckUnknown + BOPAlgo 不明です BOPAlgo BadType - BOPAlgo BadType + BOPAlgo 不正な型です BOPAlgo SelfIntersect - BOPAlgo SelfIntersect + BOPAlgo 自己交差しています BOPAlgo TooSmallEdge - BOPAlgo TooSmallEdge + BOPAlgo エッジが短すぎます BOPAlgo NonRecoverableFace - BOPAlgo NonRecoverableFace + BOPAlgo 修復できない面があります BOPAlgo IncompatibilityOfVertex - BOPAlgo IncompatibilityOfVertex + BOPAlgo 頂点に互換性がありません + BOPAlgo IncompatibilityOfEdge - BOPAlgo IncompatibilityOfEdge + BOPAlgo エッジに互換性がありません BOPAlgo IncompatibilityOfFace - BOPAlgo IncompatibilityOfFace + BOPAlgo 面に互換性がありません BOPAlgo OperationAborted - BOPAlgo OperationAborted + BOPAlgo 操作が破棄されました BOPAlgo GeomAbs_C0 - BOPAlgo GeomAbs_C0 + BOPAlgo GeomAbs C0 BOPAlgo NotValid - BOPAlgo NotValid + BOPAlgo 不正です diff --git a/src/Mod/Part/Gui/Resources/translations/Part_nl.qm b/src/Mod/Part/Gui/Resources/translations/Part_nl.qm index 10c5e8b4f4..89a0acb3fb 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_nl.qm and b/src/Mod/Part/Gui/Resources/translations/Part_nl.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts index e2715bfb85..852f8120da 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts @@ -138,7 +138,7 @@ Check Geometry - Check Geometry + Geometrie nakijken @@ -189,7 +189,7 @@ Clear All - Clear All + Alles &Leegmaken @@ -231,7 +231,7 @@ Toggle All - Toggle All + Alles omschakelen @@ -283,7 +283,7 @@ Create a cube solid - Create a cube solid + Maak een kubus Box @@ -340,12 +340,12 @@ Shape builder... - Shape builder... + Vormbouwer... Advanced utility to create shapes - Advanced utility to create shapes + Geavanceerd werktuig om vormen te maken @@ -1219,18 +1219,14 @@ Succeeded - - - - Suceeded - Suceeded + Succeeded Failed - Failed + Mislukt @@ -1253,12 +1249,12 @@ Select faces - Select faces + Selecteer vlakken Select edges - Select edges + Selecteer randen @@ -1298,12 +1294,12 @@ Constant Length - Constant Length + Constante lengte Variable Length - Variable Length + Variabele lengte @@ -1314,12 +1310,12 @@ Start length - Start length + Startlengte End length - End length + Eindlengte @@ -1392,7 +1388,7 @@ Please select a valid shape in the drop-down box first. IGES - + IGES @@ -1402,7 +1398,7 @@ Please select a valid shape in the drop-down box first. Units for export of IGES - + Units for export of IGES @@ -1422,37 +1418,37 @@ Please select a valid shape in the drop-down box first. Enable B-REP mode - + Enable B-REP mode Import - + Importeren Skip blank entities - + Skip blank entities Header - + Header Company - + Bedrijf Product - + Product Author - + Auteur @@ -1460,7 +1456,7 @@ Please select a valid shape in the drop-down box first. STEP - + STEP @@ -1470,7 +1466,7 @@ Please select a valid shape in the drop-down box first. Units for export of STEP - + Units for export of STEP @@ -1490,27 +1486,27 @@ Please select a valid shape in the drop-down box first. Scheme - + Scheme Header - + Header Company - + Bedrijf Author - + Auteur Product - + Product @@ -1873,13 +1869,13 @@ Please select a valid shape in the drop-down box first. Prism - Prism + Prisma Spiral - Spiral + Spiraal @@ -1902,7 +1898,7 @@ Please select a valid shape in the drop-down box first. Regular polygon - Regular polygon + Regelmatige veelhoek @@ -1964,28 +1960,28 @@ Please select a valid shape in the drop-down box first. U parameter: - + U parameter: V parameters: - + V parameters: Radius 3: - Straal 2: {3:?} + Radius 3: V parameter: - + V parameter: U Parameter: - + U parameter: U parametric: @@ -1999,13 +1995,13 @@ Please select a valid shape in the drop-down box first. Polygon: - Polygon: + Veelhoek: Circumradius: - Circumradius: + Straal: @@ -2050,12 +2046,12 @@ Please select a valid shape in the drop-down box first. Growth: - Growth: + Groei: Number of rotations: - Number of rotations: + Aantal rotaties: @@ -2072,7 +2068,7 @@ Please select a valid shape in the drop-down box first. From three points - From three points + Van drie punten @@ -2132,7 +2128,7 @@ Please select a valid shape in the drop-down box first. Helix - Helix + Schroef 3D View @@ -2179,7 +2175,7 @@ Please select a valid shape in the drop-down box first. Select line in 3D view - Select line in 3D view + Selecteer lijn in 3D-weergave @@ -2374,7 +2370,7 @@ Please select a valid shape in the drop-down box first. Default line width - Default line width + Standaard lijndikte @@ -2596,7 +2592,7 @@ Please select a valid shape in the drop-down box first. Select three or more vertices - + Select three or more vertices @@ -2621,7 +2617,7 @@ Please select a valid shape in the drop-down box first. Select a list of vertices - + Select a list of vertices @@ -2671,7 +2667,7 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges you want to sweep along. - + Select one or more connected edges you want to sweep along. @@ -2706,13 +2702,13 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges in the 3d view and press 'Done' - + Select one or more connected edges in the 3d view and press 'Done' The selected sweep path is invalid. - + The selected sweep path is invalid. @@ -2728,7 +2724,7 @@ Please select a valid shape in the drop-down box first. Check Geometry - Check Geometry + Geometrie nakijken @@ -3067,7 +3063,7 @@ Please select a valid shape in the drop-down box first. Face from vertices - + Face from vertices @@ -3110,7 +3106,7 @@ Please select a valid shape in the drop-down box first. Sweep Path - + Sweep Path @@ -3242,7 +3238,7 @@ Do you want to continue? Edit thickness - Edit thickness + Dikte bewerken Transform @@ -3258,7 +3254,7 @@ Do you want to continue? Import-Export - + Import-Export @@ -3465,7 +3461,7 @@ Do you want to continue? Unorientable Shape - Unorientable Shape + Niet-oriënteerbare vorm @@ -3480,12 +3476,12 @@ Do you want to continue? Sub Shape Not In Shape - Sub Shape Not In Shape + Deelvorm niet in vorm Bad Orientation - Bad Orientation + Slechte oriëntatie @@ -3577,7 +3573,7 @@ Do you want to continue? Selections - Selections + Selecties @@ -3603,7 +3599,7 @@ Do you want to continue? Clear All - Clear All + Alles &Leegmaken diff --git a/src/Mod/Part/Gui/Resources/translations/Part_no.qm b/src/Mod/Part/Gui/Resources/translations/Part_no.qm index 04ffe2a44e..451b50557c 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_no.qm and b/src/Mod/Part/Gui/Resources/translations/Part_no.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_no.ts b/src/Mod/Part/Gui/Resources/translations/Part_no.ts index 9ac9747c01..e7c90bc39e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_no.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_no.ts @@ -143,7 +143,7 @@ Analyzes Geometry For Errors - Analyzes Geometry For Errors + Analyserer geometri for feil @@ -156,12 +156,12 @@ Color per face - Color per face + Farge per flate Set color per face - Set color per face + Angi farge per ansikt @@ -175,7 +175,7 @@ Measure Angular - Measure Angular + Vinkelmål @@ -203,7 +203,7 @@ Measure Linear - Measure Linear + Lengdemål @@ -231,7 +231,7 @@ Toggle All - Toggle All + Av/på Alle @@ -283,7 +283,7 @@ Create a cube solid - Create a cube solid + Opprette en kube solid Box @@ -309,7 +309,7 @@ Create a box solid without dialog - Create a box solid without dialog + Lage en solid kube uten dialog @@ -327,7 +327,7 @@ Create a box solid without dialog - Create a box solid without dialog + Lage en solid kube uten dialog @@ -381,7 +381,7 @@ Make an intersection of two shapes - Make an intersection of two shapes + Lage et skjæringspunkt mellom to figurer @@ -394,12 +394,12 @@ Make compound - Make compound + Lage sammensatt Make a compound of several shapes - Make a compound of several shapes + Lag en sammensatt av flere figurer @@ -547,7 +547,7 @@ Make a union of several shapes - Make a union of several shapes + Lag en union av flere figurer @@ -654,7 +654,7 @@ Offset... - Offset... + Forskyvning... @@ -708,12 +708,12 @@ Refine shape - Refine shape + Forbedre figur Refine the copy of a shape - Refine the copy of a shape + Forbedre kopien av en figur @@ -894,7 +894,7 @@ Thickness... - Thickness... + Tykkelse... @@ -915,7 +915,7 @@ Selected shape is not a solid - Selected shape is not a solid + Valgt figur er ikke en solid @@ -1180,7 +1180,7 @@ Taper outward angle - Taper outward angle + Taper utover vinkel @@ -1219,18 +1219,14 @@ Succeeded - - - - Suceeded - Suceeded + Lyktes Failed - Failed + Feilet @@ -1391,7 +1387,7 @@ Please select a valid shape in the drop-down box first. IGES - + IGES @@ -1401,7 +1397,7 @@ Please select a valid shape in the drop-down box first. Units for export of IGES - + Units for export of IGES @@ -1421,37 +1417,37 @@ Please select a valid shape in the drop-down box first. Enable B-REP mode - + Enable B-REP mode Import - + Import Skip blank entities - + Skip blank entities Header - + Header Company - + Firma Product - + Produkt Author - + Forfatter @@ -1459,7 +1455,7 @@ Please select a valid shape in the drop-down box first. STEP - + STEP @@ -1469,7 +1465,7 @@ Please select a valid shape in the drop-down box first. Units for export of STEP - + Enheter for eksport av STEP @@ -1489,27 +1485,27 @@ Please select a valid shape in the drop-down box first. Scheme - + Scheme Header - + Header Company - + Firma Author - + Forfatter Product - + Produkt @@ -1784,7 +1780,7 @@ Please select a valid shape in the drop-down box first. Wedge - Wedge + Kile @@ -1872,7 +1868,7 @@ Please select a valid shape in the drop-down box first. Prism - Prism + Prisme @@ -1901,7 +1897,7 @@ Please select a valid shape in the drop-down box first. Regular polygon - Regular polygon + Regulært polygon @@ -1963,28 +1959,28 @@ Please select a valid shape in the drop-down box first. U parameter: - + U parameter: V parameters: - + V parametere: Radius 3: - Radius 2: {3:?} + Radius 3: V parameter: - + V-parameter: U Parameter: - + U Parameter: U parametric: @@ -2009,17 +2005,17 @@ Please select a valid shape in the drop-down box first. X min/max: - X min/max: + X min/maks: Y min/max: - Y min/max: + Y min/maks: Z min/max: - Z min/max: + Z min/maks: @@ -2034,7 +2030,7 @@ Please select a valid shape in the drop-down box first. Coordinate system: - Coordinate system: + Koordinatsystem: @@ -2049,29 +2045,29 @@ Please select a valid shape in the drop-down box first. Growth: - Growth: + Vekst: Number of rotations: - Number of rotations: + Antall rotasjoner: Angle 1: - Angle 1: + Vinkel 1: Angle 2: - Angle 2: + Vinkel 2: From three points - From three points + Fra tre punkt @@ -2086,12 +2082,12 @@ Please select a valid shape in the drop-down box first. End point - End point + Sluttpunkt Start point - Start point + Startpunkt @@ -2178,12 +2174,12 @@ Please select a valid shape in the drop-down box first. Select line in 3D view - Select line in 3D view + Velg linje i 3D-visning Create Solid - Create Solid + Lag Solid @@ -2309,17 +2305,17 @@ Please select a valid shape in the drop-down box first. Model settings - Model settings + Modell innstillinger Automatically refine model after boolean operation - Automatically refine model after boolean operation + Forbedre modell automatisk etter boolsk operasjon Automatically refine model after sketch-based operation - Automatically refine model after sketch-based operation + Forbedre modell automatisk etter skisse-basert operasjon @@ -2334,7 +2330,7 @@ Please select a valid shape in the drop-down box first. Automatically check model after boolean operation - Automatically check model after boolean operation + Forbedre modell automatisk etter boolsk operasjon @@ -2342,17 +2338,17 @@ Please select a valid shape in the drop-down box first. Part colors - Part colors + Del farger Default Part colors - Default Part colors + Del standardfarger Default shape color - Default shape color + Figur standardfarge @@ -2413,7 +2409,7 @@ Please select a valid shape in the drop-down box first. Face colors - Face colors + Ansikts farger @@ -2470,7 +2466,7 @@ Please select a valid shape in the drop-down box first. Input error - Input error + Inndatafeil At least two vertices, edges or wires are required. @@ -2549,7 +2545,7 @@ Please select a valid shape in the drop-down box first. Input error - Input error + Inndatafeil @@ -2595,7 +2591,7 @@ Please select a valid shape in the drop-down box first. Select three or more vertices - + Select three or more vertices @@ -2620,7 +2616,7 @@ Please select a valid shape in the drop-down box first. Select a list of vertices - + Select a list of vertices @@ -2670,7 +2666,7 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges you want to sweep along. - + Select one or more connected edges you want to sweep along. @@ -2695,7 +2691,7 @@ Please select a valid shape in the drop-down box first. Input error - Input error + Inndatafeil @@ -2705,13 +2701,13 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges in the 3d view and press 'Done' - + Select one or more connected edges in the 3d view and press 'Done' The selected sweep path is invalid. - + The selected sweep path is invalid. @@ -2898,7 +2894,7 @@ Please select a valid shape in the drop-down box first. Set color per face - Set color per face + Angi farge per ansikt @@ -3066,7 +3062,7 @@ Please select a valid shape in the drop-down box first. Face from vertices - + Face from vertices @@ -3109,7 +3105,7 @@ Please select a valid shape in the drop-down box first. Sweep Path - + Sweep Path @@ -3151,7 +3147,7 @@ in the 3D view for the sweep path. Input error - Input error + Inndatafeil @@ -3257,7 +3253,7 @@ Do you want to continue? Import-Export - + Import-Export diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pl.qm b/src/Mod/Part/Gui/Resources/translations/Part_pl.qm index 0829d9559a..cf906e7e3e 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_pl.qm and b/src/Mod/Part/Gui/Resources/translations/Part_pl.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts index 1c2799bfbc..8ed5201c49 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts @@ -59,7 +59,7 @@ Up to face - Do fasetki + Do płaszczyzny @@ -156,7 +156,7 @@ Color per face - Kolor dla lica + Kolor dla płaszczyzny @@ -175,7 +175,7 @@ Measure Angular - Measure Angular + Pomiar Kątowy @@ -189,7 +189,7 @@ Clear All - Clear All + Wyczyść wszystko @@ -203,7 +203,7 @@ Measure Linear - Measure Linear + Pomiar Liniowy @@ -217,7 +217,7 @@ Toggle 3d - Toggle 3d + Przełącz 3d @@ -231,7 +231,7 @@ Toggle All - Toggle All + Zmień Widoczność Wszystkich @@ -245,7 +245,7 @@ Toggle Delta - Toggle Delta + Przełącz Deltę @@ -258,7 +258,7 @@ Boolean... - Boolean ... + Boolean... @@ -283,7 +283,7 @@ Create a cube solid - Create a cube solid + Utwórz sześcian Box @@ -394,12 +394,12 @@ Make compound - Make compound + Utwórz kombinację Make a compound of several shapes - Make a compound of several shapes + Utwórz kombinację kilku kształtów @@ -506,7 +506,7 @@ Extrude... - Wyciągnięcie ... + Wyciągnięcie... @@ -565,7 +565,7 @@ Import CAD... - Import CAD ... + Importuj CAD... @@ -596,12 +596,12 @@ Loft... - Przeciągnięcie... + Wyciągnij... Utility to loft - Narzędzie do ustawień poddasza + Narzędzie wyciągania Advanced utility to lofts @@ -636,7 +636,7 @@ Mirroring... - Powielanie przez lustrzane odbicie... + Odbicie lustrzane... @@ -659,7 +659,7 @@ Utility to offset - Narzędzie ustawiające przesunięcie + Narzędzie tworzące odsunięcie @@ -767,7 +767,7 @@ Create a ruled surface from either two Edges or two wires - Create a ruled surface from either two Edges or two wires + Utwórz powierzchnię prostokreślną z krawędzi lub linii Create a ruled surface from two curves @@ -789,7 +789,7 @@ Section - Iloraz + Przecięcie @@ -876,7 +876,7 @@ Sweep... - Zamitanie... + Wyciągnięcie po ścieżce... @@ -1045,7 +1045,7 @@ Section - Iloraz + Przecięcie @@ -1219,18 +1219,14 @@ Succeeded - - - - Suceeded - Suceeded + Succeeded Failed - Failed + Nie powiodło się @@ -1238,7 +1234,7 @@ Fillet Edges - Zaokrągl Krawędzie + Zaokrąglij Krawędzie @@ -1253,12 +1249,12 @@ Select faces - Select faces + Wybierz płaszczyzny Select edges - Select edges + Wybierz krawędzie @@ -1268,12 +1264,12 @@ Constant Radius - Stały promień + Stały Promień Variable Radius - Zmienny promień + Zmienny Promień @@ -1298,12 +1294,12 @@ Constant Length - Constant Length + Stała Długość Variable Length - Variable Length + Zmienna Długość @@ -1314,12 +1310,12 @@ Start length - Start length + Długość początkowa End length - End length + Długość końcowa @@ -1356,7 +1352,8 @@ No edge entity is checked to fillet. Please check one or more edge entities first. - Nie zaznaczono krawędzi do sfazowania Zaznacz wcześniej jedną lub więcej krawędzi. + Nie zaznaczono krawędzi do sfazowania. +Zaznacz wcześniej jedną lub więcej krawędzi. @@ -1383,7 +1380,8 @@ Please check one or more edge entities first. No valid shape is selected. Please select a valid shape in the drop-down box first. - Wybrany kształt nie jest prawidłowy. Wybierz najpierw prawidłowy kształt w polu rozwijanym. + Wybrany kształt jest nieprawidłowy. +Wybierz najpierw prawidłowy kształt w polu rozwijanym. @@ -1391,7 +1389,7 @@ Please select a valid shape in the drop-down box first. IGES - + IGES @@ -1401,7 +1399,7 @@ Please select a valid shape in the drop-down box first. Units for export of IGES - + Units for export of IGES @@ -1421,37 +1419,37 @@ Please select a valid shape in the drop-down box first. Enable B-REP mode - + Enable B-REP mode Import - + Importuj Skip blank entities - + Skip blank entities Header - + Header Company - + Company Product - + Product Author - + Author @@ -1459,7 +1457,7 @@ Please select a valid shape in the drop-down box first. STEP - + STEP @@ -1469,7 +1467,7 @@ Please select a valid shape in the drop-down box first. Units for export of STEP - + Units for export of STEP @@ -1489,27 +1487,27 @@ Please select a valid shape in the drop-down box first. Scheme - + Scheme Header - + Header Company - + Company Author - + Author Product - + Product @@ -1872,13 +1870,13 @@ Please select a valid shape in the drop-down box first. Prism - Prism + Graniastosłup Spiral - Spiral + Spirala @@ -1901,7 +1899,7 @@ Please select a valid shape in the drop-down box first. Regular polygon - Regular polygon + Wielokąt foremny @@ -1963,28 +1961,28 @@ Please select a valid shape in the drop-down box first. U parameter: - + U parameter: V parameters: - + V parameters: Radius 3: - Promień 2: {3:?} + Radius 3: V parameter: - + V parameter: U Parameter: - + U Parameter: U parametric: @@ -1998,13 +1996,13 @@ Please select a valid shape in the drop-down box first. Polygon: - Polygon: + Wielokąt: Circumradius: - Circumradius: + Promień okręgu opisanego: @@ -2049,12 +2047,12 @@ Please select a valid shape in the drop-down box first. Growth: - Growth: + Skok: Number of rotations: - Number of rotations: + Liczba obrotów: @@ -2183,7 +2181,7 @@ Please select a valid shape in the drop-down box first. Create Solid - Create Solid + Utwórz Bryłę @@ -2221,7 +2219,7 @@ Please select a valid shape in the drop-down box first. Shape view - Widok obwiedni + Widok kształtu @@ -2236,7 +2234,7 @@ Please select a valid shape in the drop-down box first. Do not define normal per vertex - Nie definiuj normalne per wierzchołek + Nie definiuj normalnych przez wierzchołek @@ -2251,7 +2249,7 @@ Please select a valid shape in the drop-down box first. <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Hint</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Defining the normals per vertex is also called <span style=" font-style:italic;">Phong shading</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">while defining the normals per face is called </span>Flat shading<span style=" font-style:normal;">.</span></p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Hint</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Definiowanie normalnych poprzez wierzchołek jest równiez nazywane <span style=" font-style:italic;">Phong shading</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">podczas definiowania normalnych poprzez obszar jest nazywane </span>Flat shading<span style=" font-style:normal;">.</span></p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Podpowiedź</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Definiowanie normalnych poprzez wierzchołek jest równiez nazywane <span style=" font-style:italic;">cieniowanie Phong</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">podczas definiowania normalnych poprzez obszar jest nazywane </span>Cieniowanie płaskie<span style=" font-style:normal;">.</span></p></body></html> @@ -2319,17 +2317,17 @@ Please select a valid shape in the drop-down box first. Automatically refine model after sketch-based operation - Automatically refine model after sketch-based operation + Automatycznie oczyść model po operacji z użyciem szkicu Object naming - Object naming + Nazewnictwo obiektów Add name of base object - Add name of base object + Dodaj nazwę obiektu podstawowego @@ -2342,22 +2340,22 @@ Please select a valid shape in the drop-down box first. Part colors - Part colors + Kolor Części Default Part colors - Default Part colors + Domyślne kolory Części Default shape color - Default shape color + Domyślny kolor kształtu The default color for new shapes - The default color for new shapes + Domyślny kolor dla nowych kształtów @@ -2368,18 +2366,18 @@ Please select a valid shape in the drop-down box first. The default line color for new shapes - The default line color for new shapes + Domyślny kolor linii dla nowych kształtów Default line width - Default line width + Domyślna szerokość linii The default line thickness for new shapes - The default line thickness for new shapes + Domyślna grubość linii dla nowych kształtów @@ -2390,22 +2388,22 @@ Please select a valid shape in the drop-down box first. Default vertex color - Default vertex color + Domyślny kolor wierzchołków Default vertex size - Default vertex size + Domyślny rozmiar wierzchołków Bounding box color - Bounding box color + Kolor okna zakreślania The color of bounding boxes in the 3D view - The color of bounding boxes in the 3D view + Kolor okna zakreślania w widoku 3D @@ -2449,7 +2447,7 @@ Please select a valid shape in the drop-down box first. Vertex/Edge/Wire/Face - Vertex/Edge/Wire/Face + Wierzchołek/Krawędź/Linia/Płaszczyzna @@ -2465,7 +2463,7 @@ Please select a valid shape in the drop-down box first. At least two vertices, edges, wires or faces are required. - At least two vertices, edges, wires or faces are required. + Wymagane są co najmniej dwa wierzchołki, krawędzie, linie lub płaszczyzny. @@ -2486,7 +2484,7 @@ Please select a valid shape in the drop-down box first. Mirroring - Powielanie przez lustrzane odbicie + Odbicie lustrzane @@ -2516,7 +2514,7 @@ Please select a valid shape in the drop-down box first. Base point: - Punkt zaczepienia: + Punkt bazowy: @@ -2595,7 +2593,7 @@ Please select a valid shape in the drop-down box first. Select three or more vertices - + Select three or more vertices @@ -2605,7 +2603,7 @@ Please select a valid shape in the drop-down box first. Select two or more faces - Zaznacz 2 lub więcej fasetek + Zaznacz 2 lub więcej płaszczyzn @@ -2620,7 +2618,7 @@ Please select a valid shape in the drop-down box first. Select a list of vertices - + Select a list of vertices @@ -2630,7 +2628,7 @@ Please select a valid shape in the drop-down box first. Select adjacent faces - Zaznacz sąsiednie fasetki + Zaznacz sąsiednie płaszczyzny @@ -2654,7 +2652,7 @@ Please select a valid shape in the drop-down box first. Vertex/Edge/Wire/Face - Vertex/Edge/Wire/Face + Wierzchołek/Krawędź/Linia/Płaszczyzna @@ -2665,12 +2663,12 @@ Please select a valid shape in the drop-down box first. Select an edge or wire you want to sweep along. - Wybierz krawędź lub drut, wzdłuż którego chcesz wycierać. + Wybierz krawędź lub linię, wzdłuż którego chcesz wycierać. Select one or more connected edges you want to sweep along. - + Select one or more connected edges you want to sweep along. @@ -2680,7 +2678,7 @@ Please select a valid shape in the drop-down box first. At least one edge or wire is required. - Wymagana jest co najmniej jedna krawędź lub drut. + Wymagana jest co najmniej jedna krawędź lub linia. @@ -2690,7 +2688,7 @@ Please select a valid shape in the drop-down box first. '%1' cannot be used as profile and path. - '%1' cannot be used as profile and path. + "%1" nie można użyć jako profilu i ścieżki. @@ -2705,13 +2703,13 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges in the 3d view and press 'Done' - + Select one or more connected edges in the 3d view and press 'Done' The selected sweep path is invalid. - + The selected sweep path is invalid. @@ -2719,7 +2717,7 @@ Please select a valid shape in the drop-down box first. Shape Content - Shape Content + Zawartość kształtu @@ -3066,7 +3064,7 @@ Please select a valid shape in the drop-down box first. Face from vertices - + Face from vertices @@ -3109,7 +3107,7 @@ Please select a valid shape in the drop-down box first. Sweep Path - + Sweep Path @@ -3125,7 +3123,7 @@ Please select a valid shape in the drop-down box first. Select one or more profiles and select an edge or wire in the 3D view for the sweep path. - Wybierz jeden lub więcej profili i zaznacz krawędź lub drut w widoku 3D dla utworzenia ścieżki. + Wybierz jeden lub więcej profili i zaznacz krawędź lub linię w widoku 3D dla utworzenia ścieżki. @@ -3176,7 +3174,7 @@ in the 3D view for the sweep path. Non-solids selected - Non-solids selected + Zaznaczone nie są bryłami @@ -3184,8 +3182,7 @@ in the 3D view for the sweep path. The use of non-solids for boolean operations may lead to unexpected results. Do you want to continue? - The use of non-solids for boolean operations may lead to unexpected results. -Do you want to continue? + Użycie obiektów nie będących bryłami dla operacji logicznych może doprowadzić do nieoczekiwanych rezultatów. Czy chcesz kontynuować? @@ -3256,7 +3253,7 @@ Do you want to continue? Import-Export - + Import-Export @@ -3313,7 +3310,7 @@ Do you want to continue? Wire - Przewód + Linia @@ -3413,7 +3410,7 @@ Do you want to continue? Empty Wire - Pusty przewód + Pusta Linia @@ -3423,7 +3420,7 @@ Do you want to continue? Self Intersecting Wire - Samo przecinające się przewody + Samo przecinające się Linie @@ -3433,22 +3430,22 @@ Do you want to continue? Invalid Wire - Nieprawidłowy przewód + Nieprawidłowa Linia Redundant Wire - Nadmierny przewód + Zbędna Linia Intersecting Wires - Przecinające się przewody + Przecinające się linie Invalid Imbrication Of Wires - Nieprawidłowe nakładanie się przwodów + Nieprawidłowe nakładanie się linii @@ -3513,47 +3510,47 @@ Do you want to continue? BOPAlgo CheckUnknown - BOPAlgo CheckUnknown + Suma kontrolna Nieznana BOPAlgo BOPAlgo BadType - BOPAlgo BadType + Zły Typ BOPAlgo BOPAlgo SelfIntersect - BOPAlgo SelfIntersect + Samo przecinający BOPAlgo BOPAlgo TooSmallEdge - BOPAlgo TooSmallEdge + Zbyt Mała Krawędź BOPAlgo BOPAlgo NonRecoverableFace - BOPAlgo NonRecoverableFace + Nie Odwracalna Płaszczyzna BOPAlgo BOPAlgo IncompatibilityOfVertex - BOPAlgo IncompatibilityOfVertex + Niekompatybilność Wierzchołków BOPAlgo BOPAlgo IncompatibilityOfEdge - BOPAlgo IncompatibilityOfEdge + Niekompatybilność Krawędzi BOPAlgo BOPAlgo IncompatibilityOfFace - BOPAlgo IncompatibilityOfFace + Niekompatybilność Płaszczyzn BOPAlgo BOPAlgo OperationAborted - BOPAlgo OperationAborted + Operacja Przerwana BOPAlgo @@ -3563,7 +3560,7 @@ Do you want to continue? BOPAlgo NotValid - BOPAlgo NotValid + Nie Ważny BOPAlgo @@ -3575,7 +3572,7 @@ Do you want to continue? Selections - Selections + Zaznaczenia @@ -3586,22 +3583,22 @@ Do you want to continue? Reset Dialog - Reset Dialog + Resetuj okno dialogowe Toggle 3d - Toggle 3d + Przełącz 3d Toggle Delta - Toggle Delta + Przełącz Deltę Clear All - Clear All + Wyczyść wszystko diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.qm b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.qm index 419254c7cc..e8a80088b8 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.qm and b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts index b4501aea33..b7032f343c 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts @@ -1219,11 +1219,7 @@ Succeeded - - - - Suceeded - Sucesso + Bem sucedido @@ -1392,7 +1388,7 @@ Please select a valid shape in the drop-down box first. IGES - + IGES @@ -1402,7 +1398,7 @@ Please select a valid shape in the drop-down box first. Units for export of IGES - + Unidades para exportação no formato IGES @@ -1422,37 +1418,37 @@ Please select a valid shape in the drop-down box first. Enable B-REP mode - + Ativar o modo B-REP Import - + Importação Skip blank entities - + Pular entidades vazias Header - + Cabeçalho Company - + Empresa Product - + Produto Author - + Autor @@ -1460,7 +1456,7 @@ Please select a valid shape in the drop-down box first. STEP - + STEP @@ -1470,7 +1466,7 @@ Please select a valid shape in the drop-down box first. Units for export of STEP - + Unidades para exportação no formato STEP @@ -1490,27 +1486,27 @@ Please select a valid shape in the drop-down box first. Scheme - + Esquema Header - + Cabeçalho Company - + Empresa Author - + Autor Product - + Produto @@ -1964,28 +1960,28 @@ Please select a valid shape in the drop-down box first. U parameter: - + Parâmetro U: V parameters: - + Parâmetros V: Radius 3: - Raio 2: {3:?} + Raio 3: V parameter: - + Parâmetro V: U Parameter: - + Parâmetro U: U parametric: @@ -2596,7 +2592,7 @@ Please select a valid shape in the drop-down box first. Select three or more vertices - + Selecione três ou mais vértices @@ -2621,7 +2617,7 @@ Please select a valid shape in the drop-down box first. Select a list of vertices - + Selecione uma lista de vértices @@ -2671,7 +2667,7 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges you want to sweep along. - + Selecione uma ou mais arestas conectadas ao longo das quais deseja fazer a varredura. @@ -2706,13 +2702,13 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges in the 3d view and press 'Done' - + Selecione uma ou mais arestas conectadas na vista 3d e aperte 'Done' The selected sweep path is invalid. - + O caminho de varredura selecionado é inválido. @@ -3067,7 +3063,7 @@ Please select a valid shape in the drop-down box first. Face from vertices - + Face a partir de vértices @@ -3110,7 +3106,7 @@ Please select a valid shape in the drop-down box first. Sweep Path - + Caminho de varredura @@ -3256,7 +3252,7 @@ Do you want to continue? Import-Export - + Importação e exportação diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.qm b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.qm index b63af789a9..8e01704266 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.qm and b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts index cc2a62b0dd..4fa893681e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts @@ -143,7 +143,7 @@ Analyzes Geometry For Errors - Analyzes Geometry For Errors + Analiza Erros Geométricos @@ -175,7 +175,7 @@ Measure Angular - Measure Angular + Medição Angular @@ -189,7 +189,7 @@ Clear All - Clear All + Limpar tudo @@ -203,7 +203,7 @@ Measure Linear - Measure Linear + Medição Linear @@ -283,7 +283,7 @@ Create a cube solid - Create a cube solid + Criar um cubo sólido Box @@ -340,7 +340,7 @@ Shape builder... - Shape builder... + Construtor de Formas... @@ -394,12 +394,12 @@ Make compound - Make compound + Fazer composto Make a compound of several shapes - Make a compound of several shapes + Fazer composto de várias formas @@ -779,7 +779,7 @@ Make a section of two shapes - Make a section of two shapes + Selecionar duas formas @@ -820,7 +820,7 @@ Create simple copy - Create simple copy + Criar cópia simples @@ -1219,18 +1219,14 @@ Succeeded - - - - Suceeded - Suceeded + Succeeded Failed - Failed + Falhou @@ -1253,12 +1249,12 @@ Select faces - Select faces + Faces selecionadas Select edges - Select edges + Arestas selecionadas @@ -1298,12 +1294,12 @@ Constant Length - Constant Length + Comprimento Constante Variable Length - Variable Length + Comprimento Variável @@ -1314,12 +1310,12 @@ Start length - Start length + Início do comprimento End length - End length + Fim do comprimento @@ -1391,7 +1387,7 @@ Please select a valid shape in the drop-down box first. IGES - + IGES @@ -1401,7 +1397,7 @@ Please select a valid shape in the drop-down box first. Units for export of IGES - + Units for export of IGES @@ -1421,37 +1417,37 @@ Please select a valid shape in the drop-down box first. Enable B-REP mode - + Enable B-REP mode Import - + Importar Skip blank entities - + Skip blank entities Header - + Header Company - + Company Product - + produto Author - + Author @@ -1459,7 +1455,7 @@ Please select a valid shape in the drop-down box first. STEP - + STEP @@ -1469,7 +1465,7 @@ Please select a valid shape in the drop-down box first. Units for export of STEP - + Units for export of STEP @@ -1489,27 +1485,27 @@ Please select a valid shape in the drop-down box first. Scheme - + Scheme Header - + Header Company - + Company Author - + Author Product - + produto @@ -1872,13 +1868,13 @@ Please select a valid shape in the drop-down box first. Prism - Prism + Prisma Spiral - Spiral + Espiral @@ -1901,7 +1897,7 @@ Please select a valid shape in the drop-down box first. Regular polygon - Regular polygon + Polígono regular @@ -1963,28 +1959,28 @@ Please select a valid shape in the drop-down box first. U parameter: - + Parâmetro U: V parameters: - + Parâmetros V: Radius 3: - Raio 2: {3:?} + Raio 3: V parameter: - + Parâmetro V: U Parameter: - + Parâmetro U: U parametric: @@ -1998,13 +1994,13 @@ Please select a valid shape in the drop-down box first. Polygon: - Polygon: + Polígono: Circumradius: - Circumradius: + Raio externo: @@ -2049,12 +2045,12 @@ Please select a valid shape in the drop-down box first. Growth: - Growth: + Crescimento: Number of rotations: - Number of rotations: + Número de rotações: @@ -2125,13 +2121,13 @@ Please select a valid shape in the drop-down box first. Pitch: - Pitch: + Altura: Helix - Helix + Hélice 3D View @@ -2183,7 +2179,7 @@ Please select a valid shape in the drop-down box first. Create Solid - Create Solid + Criar Sólido @@ -2314,27 +2310,27 @@ Please select a valid shape in the drop-down box first. Automatically refine model after boolean operation - Automatically refine model after boolean operation + Refinar os modelos automaticamente após operação booleana Automatically refine model after sketch-based operation - Automatically refine model after sketch-based operation + Refinar modelos automaticamente após alterações no esboço (sketch) Object naming - Object naming + Nomeação de objetos Add name of base object - Add name of base object + Adicionar o nome do objeto base Automatically check model after boolean operation - Automatically check model after boolean operation + Verificar os modelos automaticamente após uma operação booleana @@ -2342,22 +2338,22 @@ Please select a valid shape in the drop-down box first. Part colors - Part colors + Cores de peças (Part) Default Part colors - Default Part colors + Cores predefinidas das peças (Part) Default shape color - Default shape color + Cor predefinida das formas The default color for new shapes - The default color for new shapes + Cor predefinida para novas formas @@ -2368,18 +2364,18 @@ Please select a valid shape in the drop-down box first. The default line color for new shapes - The default line color for new shapes + Cor predefinida de linha para novas formas Default line width - Default line width + Largura predefinida de linha The default line thickness for new shapes - The default line thickness for new shapes + Espessura de linha predefinida para novas formas @@ -2390,22 +2386,22 @@ Please select a valid shape in the drop-down box first. Default vertex color - Default vertex color + Cor predefinida de vértices Default vertex size - Default vertex size + Tamanho predefinido de vértice Bounding box color - Bounding box color + Cor da caixa delimitadora The color of bounding boxes in the 3D view - The color of bounding boxes in the 3D view + A cor de caixas delimitadoras na vista de 3D @@ -2426,7 +2422,7 @@ Please select a valid shape in the drop-down box first. Location - Location + Local @@ -2449,7 +2445,7 @@ Please select a valid shape in the drop-down box first. Vertex/Edge/Wire/Face - Vertex/Edge/Wire/Face + Vertice/Aresta/Arame(wire)/Face @@ -2465,7 +2461,7 @@ Please select a valid shape in the drop-down box first. At least two vertices, edges, wires or faces are required. - At least two vertices, edges, wires or faces are required. + São necessários pelo menos dois vértices, arestas, arames ou faces. @@ -2486,7 +2482,7 @@ Please select a valid shape in the drop-down box first. Mirroring - Mirroring + Espelhamento @@ -2496,22 +2492,22 @@ Please select a valid shape in the drop-down box first. Mirror plane: - Mirror plane: + Plano de espelhamento: XY plane - XY plane + Plano XY XZ plane - XZ plane + Plano XZ YZ plane - YZ plane + Plano YZ @@ -2536,7 +2532,7 @@ Please select a valid shape in the drop-down box first. Select a shape for mirroring, first. - Select a shape for mirroring, first. + Selecione primeiro uma forma para espelhar. @@ -2595,12 +2591,12 @@ Please select a valid shape in the drop-down box first. Select three or more vertices - + Selecione três ou mais vértices Select one or more edges - Select one or more edges + Selecione um ou mais arestas @@ -2620,7 +2616,7 @@ Please select a valid shape in the drop-down box first. Select a list of vertices - + Selecione uma lista de vértices @@ -2654,7 +2650,7 @@ Please select a valid shape in the drop-down box first. Vertex/Edge/Wire/Face - Vertex/Edge/Wire/Face + Vertice/Aresta/Arame(wire)/Face @@ -2670,7 +2666,7 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges you want to sweep along. - + Select one or more connected edges you want to sweep along. @@ -2680,7 +2676,7 @@ Please select a valid shape in the drop-down box first. At least one edge or wire is required. - At least one edge or wire is required. + É necessário pelo menos uma aresta ou arame(wire). @@ -2690,7 +2686,7 @@ Please select a valid shape in the drop-down box first. '%1' cannot be used as profile and path. - '%1' cannot be used as profile and path. + '%1' não pode ser usado como o perfil e caminho. @@ -2705,13 +2701,13 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges in the 3d view and press 'Done' - + Select one or more connected edges in the 3d view and press 'Done' The selected sweep path is invalid. - + The selected sweep path is invalid. @@ -2918,7 +2914,7 @@ Please select a valid shape in the drop-down box first. Box selection - Box selection + Caixa de seleção @@ -3066,7 +3062,7 @@ Please select a valid shape in the drop-down box first. Face from vertices - + Face from vertices @@ -3109,7 +3105,7 @@ Please select a valid shape in the drop-down box first. Sweep Path - + Sweep Path @@ -3226,12 +3222,12 @@ Do you want to continue? Edit mirror plane - Edit mirror plane + Editar o plano de espelho Edit chamfer edges - Edit chamfer edges + Editar as arestas de chanfre @@ -3257,7 +3253,7 @@ Do you want to continue? Import-Export - + Import-Export @@ -3339,42 +3335,42 @@ Do you want to continue? Invalid Point On Curve - Invalid Point On Curve + Ponto na Curva Inválido Invalid Point On Curve On Surface - Invalid Point On Curve On Surface + Ponto na Curva Inválido na Superfície Invalid Point On Surface - Invalid Point On Surface + Ponto na Superfície Inválido No 3D Curve - No 3D Curve + Sem Curva 3D Multiple 3D Curve - Multiple 3D Curve + Curva 3D Múltipla Invalid 3D Curve - Invalid 3D Curve + Curva 3D inválida No Curve On Surface - No Curve On Surface + Sem Curva na Superfície Invalid Curve On Surface - Invalid Curve On Surface + Curva na Superfície Inválida @@ -3459,7 +3455,7 @@ Do you want to continue? Redundant Face - Redundant Face + Face redundante @@ -3494,12 +3490,12 @@ Do you want to continue? Invalid Tolerance Value - Invalid Tolerance Value + Valor de tolerância inválido Check Failed - Check Failed + Verificação falhou @@ -3576,7 +3572,7 @@ Do you want to continue? Selections - Selections + Seleções @@ -3587,7 +3583,7 @@ Do you want to continue? Reset Dialog - Reset Dialog + Valor de tolerância inválido @@ -3602,7 +3598,7 @@ Do you want to continue? Clear All - Clear All + Limpar tudo @@ -3635,7 +3631,7 @@ Do you want to continue? Boolean - Boolean + Booleano diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ro.qm b/src/Mod/Part/Gui/Resources/translations/Part_ro.qm index f7c2227c79..c6bd3acd8f 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_ro.qm and b/src/Mod/Part/Gui/Resources/translations/Part_ro.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts index eb88849a91..76c5c913a0 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts @@ -1219,11 +1219,7 @@ Succeeded - - - - Suceeded - Suceeded + Succeeded @@ -1393,7 +1389,7 @@ Selectati mai intai o forma valida in casuta de selectie. IGES - + IGES @@ -1403,7 +1399,7 @@ Selectati mai intai o forma valida in casuta de selectie. Units for export of IGES - + Units for export of IGES @@ -1423,37 +1419,37 @@ Selectati mai intai o forma valida in casuta de selectie. Enable B-REP mode - + Enable B-REP mode Import - + Import Skip blank entities - + Skip blank entities Header - + Header Company - + Company Product - + Product Author - + Author @@ -1461,7 +1457,7 @@ Selectati mai intai o forma valida in casuta de selectie. STEP - + STEP @@ -1471,7 +1467,7 @@ Selectati mai intai o forma valida in casuta de selectie. Units for export of STEP - + Units for export of STEP @@ -1491,27 +1487,27 @@ Selectati mai intai o forma valida in casuta de selectie. Scheme - + Scheme Header - + Header Company - + Company Author - + Author Product - + Product @@ -1965,28 +1961,28 @@ Selectati mai intai o forma valida in casuta de selectie. U parameter: - + U parameter: V parameters: - + V parameters: Radius 3: - Raza 2: {3:?} + Radius 3: V parameter: - + V parameter: U Parameter: - + U Parameter: U parametric: @@ -2375,7 +2371,7 @@ Selectati mai intai o forma valida in casuta de selectie. Default line width - Default line width + Lățime implicită linie @@ -2597,7 +2593,7 @@ Selectati mai intai o forma valida in casuta de selectie. Select three or more vertices - + Select three or more vertices @@ -2622,7 +2618,7 @@ Selectati mai intai o forma valida in casuta de selectie. Select a list of vertices - + Select a list of vertices @@ -2672,7 +2668,7 @@ Selectati mai intai o forma valida in casuta de selectie. Select one or more connected edges you want to sweep along. - + Select one or more connected edges you want to sweep along. @@ -2707,13 +2703,13 @@ Selectati mai intai o forma valida in casuta de selectie. Select one or more connected edges in the 3d view and press 'Done' - + Select one or more connected edges in the 3d view and press 'Done' The selected sweep path is invalid. - + The selected sweep path is invalid. @@ -3068,7 +3064,7 @@ Selectati mai intai o forma valida in casuta de selectie. Face from vertices - + Face from vertices @@ -3111,7 +3107,7 @@ Selectati mai intai o forma valida in casuta de selectie. Sweep Path - + Sweep Path @@ -3260,7 +3256,7 @@ Do you want to continue? Import-Export - + Import-Export diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ru.qm b/src/Mod/Part/Gui/Resources/translations/Part_ru.qm index b690349b06..3df0a9d81a 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_ru.qm and b/src/Mod/Part/Gui/Resources/translations/Part_ru.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts index e1db4c3d3b..6b7d6fc1a3 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts @@ -189,7 +189,7 @@ Clear All - Clear All + Очистить все @@ -203,7 +203,7 @@ Measure Linear - Измерить длинну + Измерить длину @@ -217,7 +217,7 @@ Toggle 3d - Toggle 3d + Переключить 3d @@ -245,7 +245,7 @@ Toggle Delta - Toggle Delta + Переключить Дельту @@ -363,7 +363,7 @@ Chamfer the selected edges of a shape - Притупить фаской выбранные края фигуры + Притупить фаской выбранные грани фигуры @@ -394,12 +394,12 @@ Make compound - Make compound + Составить многогранник Make a compound of several shapes - Make a compound of several shapes + Составить многогранник из нескольких фигур @@ -1219,11 +1219,7 @@ Succeeded - - - - Suceeded - Успешно завершено + Succeeded @@ -1298,12 +1294,12 @@ Constant Length - Constant Length + Постоянная длинна Variable Length - Variable Length + Переменная длина @@ -1314,12 +1310,12 @@ Start length - Start length + Начальная длина End length - End length + Конечная длина @@ -1392,7 +1388,7 @@ Please select a valid shape in the drop-down box first. IGES - + IGES @@ -1402,7 +1398,7 @@ Please select a valid shape in the drop-down box first. Units for export of IGES - + Units for export of IGES @@ -1422,37 +1418,37 @@ Please select a valid shape in the drop-down box first. Enable B-REP mode - + Enable B-REP mode Import - + импорт Skip blank entities - + Skip blank entities Header - + Header Company - + Компания Product - + Продукт Author - + Автор @@ -1460,7 +1456,7 @@ Please select a valid shape in the drop-down box first. STEP - + STEP @@ -1470,7 +1466,7 @@ Please select a valid shape in the drop-down box first. Units for export of STEP - + Units for export of STEP @@ -1490,27 +1486,27 @@ Please select a valid shape in the drop-down box first. Scheme - + Scheme Header - + Header Company - + Компания Author - + Автор Product - + Продукт @@ -1964,28 +1960,28 @@ Please select a valid shape in the drop-down box first. U parameter: - + U parameter: V parameters: - + V parameters: Radius 3: - Радиус 2: {3:?} + Radius 3: V parameter: - + V parameter: U Parameter: - + U Parameter: U parametric: @@ -1999,13 +1995,13 @@ Please select a valid shape in the drop-down box first. Polygon: - Polygon: + Многоугольник: Circumradius: - Circumradius: + Радиус: @@ -2050,12 +2046,12 @@ Please select a valid shape in the drop-down box first. Growth: - Growth: + Приращение (шаг): Number of rotations: - Number of rotations: + Число оборотов: @@ -2320,7 +2316,7 @@ Please select a valid shape in the drop-down box first. Automatically refine model after sketch-based operation - Automatically refine model after sketch-based operation + Автоматически поправить модель после операций над эскизом @@ -2330,7 +2326,7 @@ Please select a valid shape in the drop-down box first. Add name of base object - Add name of base object + Добавить имя базового объекта @@ -2343,17 +2339,17 @@ Please select a valid shape in the drop-down box first. Part colors - Part colors + Цвета в Part Default Part colors - Default Part colors + Цвета Деталей по умолчанию Default shape color - Default shape color + Цвет формы по умолчанию @@ -2374,7 +2370,7 @@ Please select a valid shape in the drop-down box first. Default line width - Default line width + Ширина линии по умолчанию @@ -2391,22 +2387,22 @@ Please select a valid shape in the drop-down box first. Default vertex color - Default vertex color + Цвет вершины по умолчанию Default vertex size - Default vertex size + Размер вершины Bounding box color - Bounding box color + Цвет охватывающей рамки The color of bounding boxes in the 3D view - The color of bounding boxes in the 3D view + Цвет охватывающей рамки в 3D виде @@ -2450,7 +2446,7 @@ Please select a valid shape in the drop-down box first. Vertex/Edge/Wire/Face - Vertex/Edge/Wire/Face + Конец линии/Грань/Последовательность граней/Поверхность @@ -2466,7 +2462,7 @@ Please select a valid shape in the drop-down box first. At least two vertices, edges, wires or faces are required. - At least two vertices, edges, wires or faces are required. + Необходимы две вершины, линии или грани. @@ -2596,7 +2592,7 @@ Please select a valid shape in the drop-down box first. Select three or more vertices - + Выберите три или более вершины @@ -2621,7 +2617,7 @@ Please select a valid shape in the drop-down box first. Select a list of vertices - + Выберите список вершин @@ -2655,7 +2651,7 @@ Please select a valid shape in the drop-down box first. Vertex/Edge/Wire/Face - Vertex/Edge/Wire/Face + Конец линии/Грань/Последовательность граней/Поверхность @@ -2671,7 +2667,7 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges you want to sweep along. - + Select one or more connected edges you want to sweep along. @@ -2691,7 +2687,7 @@ Please select a valid shape in the drop-down box first. '%1' cannot be used as profile and path. - '%1' cannot be used as profile and path. + '%1' не может использоваться в качестве профиля и пути. @@ -2706,13 +2702,13 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges in the 3d view and press 'Done' - + Select one or more connected edges in the 3d view and press 'Done' The selected sweep path is invalid. - + The selected sweep path is invalid. @@ -2720,7 +2716,7 @@ Please select a valid shape in the drop-down box first. Shape Content - Shape Content + Вместимость фигуры @@ -2973,12 +2969,12 @@ Please select a valid shape in the drop-down box first. Ruled surface - Поверхность по закону + Линейчатая поверхность Closed - Закрыто + Замкнуть @@ -3062,12 +3058,12 @@ Please select a valid shape in the drop-down box first. Edge from vertices - Ребро по вершинам + Ребро из вершинам Face from vertices - + Грань из вершин @@ -3110,7 +3106,7 @@ Please select a valid shape in the drop-down box first. Sweep Path - + Sweep Path @@ -3185,8 +3181,7 @@ in the 3D view for the sweep path. The use of non-solids for boolean operations may lead to unexpected results. Do you want to continue? - The use of non-solids for boolean operations may lead to unexpected results. -Do you want to continue? + Использование твердых тел для булевых операций может привести к непредвиденным результатам. Вы хотите продолжить? @@ -3257,7 +3252,7 @@ Do you want to continue? Import-Export - + Импорт/экспорт @@ -3514,47 +3509,47 @@ Do you want to continue? BOPAlgo CheckUnknown - BOPAlgo CheckUnknown + BOPAlgo ПроверитьНеизвестную BOPAlgo BadType - BOPAlgo BadType + BOPAlgo ЛожныйТип BOPAlgo SelfIntersect - BOPAlgo SelfIntersect + BOPAlgo Самопересечение BOPAlgo TooSmallEdge - BOPAlgo TooSmallEdge + BOPAlgo ОченьМальнькаяГрань BOPAlgo NonRecoverableFace - BOPAlgo NonRecoverableFace + BOPAlgo НеВосстанавимаяПоверхность BOPAlgo IncompatibilityOfVertex - BOPAlgo IncompatibilityOfVertex + BOPAlgo НесочетаемостьВершины BOPAlgo IncompatibilityOfEdge - BOPAlgo IncompatibilityOfEdge + BOPAlgo НесочетаемостьГрани BOPAlgo IncompatibilityOfFace - BOPAlgo IncompatibilityOfFace + BOPAlgo НесочетаемостьПоверхности BOPAlgo OperationAborted - BOPAlgo OperationAborted + BOPAlgo ОперацияПрервана @@ -3564,7 +3559,7 @@ Do you want to continue? BOPAlgo NotValid - BOPAlgo NotValid + BOPAlgo Неприменимо @@ -3576,7 +3571,7 @@ Do you want to continue? Selections - Selections + Выделения @@ -3587,22 +3582,22 @@ Do you want to continue? Reset Dialog - Reset Dialog + Сброс настроек диалогового окна Toggle 3d - Toggle 3d + Переключить 3d Toggle Delta - Toggle Delta + Переключить Дельту Clear All - Clear All + Очистить все diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sr.qm b/src/Mod/Part/Gui/Resources/translations/Part_sr.qm new file mode 100644 index 0000000000..844e63ce34 Binary files /dev/null and b/src/Mod/Part/Gui/Resources/translations/Part_sr.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sr.ts b/src/Mod/Part/Gui/Resources/translations/Part_sr.ts new file mode 100644 index 0000000000..c0e147ac14 --- /dev/null +++ b/src/Mod/Part/Gui/Resources/translations/Part_sr.ts @@ -0,0 +1,3636 @@ + + + + + BlockDefinition + + + Block definition + Дефиниција блока + + + + First limit + Прво ограничење + + + + + Type: + Тип: + + + + + mm + мм + + + + + Length: + Дужина: + + + + + Dimension + Димензија + + + + + Up to next + До првог + + + + + Up to last + До последњег + + + + + Up to plane + До равни + + + + + Up to face + До површи + + + + + Limit: + Граница: + + + + + + + No selection + Нема одабира + + + + Profile + Профил + + + + Selection: + Одабир: + + + + Reverse + Обрнуто + + + + Both sides + Обе стране + + + + Second limit + Друга граница + + + + Direction + Правац + + + + Perpendicular to sketch + Вертикално у одноcу на cкицу + + + + Reference + Референца + + + Apply + Примени + + + Cancel + Поништи + + + OK + U redu + + + + CmdCheckGeometry + + + Part + Компонента + + + + Check Geometry + Провери Геометрију + + + + Analyzes Geometry For Errors + Анализирање Геометрије Ради Грешака + + + + CmdColorPerFace + + + Part + Компонента + + + + Color per face + Боја по површи + + + + Set color per face + Подеcи боју по појединачној површи + + + + CmdMeasureAngular + + + Part + Компонента + + + + + Measure Angular + Измерити Угао + + + + CmdMeasureClearAll + + + Part + Компонента + + + + + Clear All + Обриши све + + + + CmdMeasureLinear + + + Part + Компонента + + + + + Measure Linear + Измери Дужинcки + + + + CmdMeasureToggle3d + + + Part + Компонента + + + + + Toggle 3d + Toggle 3d + + + + CmdMeasureToggleAll + + + Part + Компонента + + + + + Toggle All + Cакрити/Показати Cве + + + + CmdMeasureToggleDelta + + + Part + Компонента + + + + + Toggle Delta + Toggle Delta + + + + CmdPartBoolean + + + Part + Компонента + + + + Boolean... + Булова... + + + + Run a boolean operation with two shapes selected + Изврши Булову операцију cа два одабрана облика + + + + CmdPartBox + + + Part + Компонента + + + + + + Cube + Коцка + + + + Create a cube solid + Направи чврcту коцку + + + Box + Box + + + Create a box solid + Create a box solid + + + + CmdPartBox2 + + + Part + Компонента + + + + Box fix 1 + Блок поправка 1 + + + + Create a box solid without dialog + Направи чврcту кутију без дијалога + + + + CmdPartBox3 + + + Part + Компонента + + + + Box fix 2 + Блок поправка 2 + + + + Create a box solid without dialog + Направи чврcту кутију без дијалога + + + + CmdPartBuilder + + + Part + Компонента + + + + Shape builder... + Градитељ облика... + + + + Advanced utility to create shapes + Напредна алатка за прављење фигура + + + + CmdPartChamfer + + + Part + Компонента + + + + Chamfer... + Chamfer... + + + + Chamfer the selected edges of a shape + Обори одабране ивице облика + + + + CmdPartCommon + + + Part + Компонента + + + + Intersection + Преcек + + + + Make an intersection of two shapes + Направи преcек две фигуре + + + + CmdPartCompound + + + Part + Компонента + + + + Make compound + Make compound + + + + Make a compound of several shapes + Make a compound of several shapes + + + + CmdPartCone + + + Part + Компонента + + + + + + Cone + Купа + + + + Create a cone solid + Направи купаcто чврcто тело + + + + CmdPartCrossSections + + + Part + Компонента + + + + Cross-sections... + Пресеци... + + + + Cross-sections + Пресеци + + + + CmdPartCut + + + Part + Компонента + + + + Cut + Исеци + + + + Make a cut of two shapes + Направи рез од две фигуре + + + + CmdPartCylinder + + + Part + Компонента + + + + Create a Cylinder + Креирај Цилиндар + + + + + + Cylinder + Ваљак + + + + CmdPartExport + + + Part + Компонента + + + + Export CAD... + Извези CAD... + + + + Exports to a CAD file + Извези у CAD датотеку + + + + CmdPartExtrude + + + Part + Компонента + + + + Extrude... + Извуци... + + + + Extrude a selected sketch + Извуци одабрану cкицу + + + + CmdPartFillet + + + Part + Компонента + + + + Fillet... + Заобли... + + + + Fillet the selected edges of a shape + Заобли изабране ивице облика + + + + CmdPartFuse + + + Part + Компонента + + + + Union + Унија + + + + Make a union of several shapes + Направи унију од више тела + + + + CmdPartImport + + + Part + Компонента + + + + Imports a CAD file + Учитава CAD датотеку + + + + Import CAD... + Учитај CAD... + + + + CmdPartImportCurveNet + + + Part + Компонента + + + + Import a curve network + Import a curve network + + + + Import curve network... + Import curve network... + + + + CmdPartLoft + + + Part + Компонента + + + + Loft... + Loft... + + + + Utility to loft + Utility to loft + + + Advanced utility to lofts + Advanced utility to lofts + + + + CmdPartMakeSolid + + + Part + Компонента + + + + Convert to solid + Претвори у чврcто тело + + + + Create solid from a shell or compound + Create solid from a shell or compound + + + + CmdPartMirror + + + Part + Компонента + + + + Mirroring... + Одраз... + + + + Mirroring a selected shape + Прављење одраза одабраног облика + + + + CmdPartOffset + + + Part + Компонента + + + + Offset... + Одмак... + + + + Utility to offset + Алат за одмак + + + + CmdPartPickCurveNet + + + Part + Компонента + + + + Pick curve network + Pick curve network + + + + Pick a curve network + Pick a curve network + + + + CmdPartPrimitives + + + Part + Компонента + + + + Create primitives... + Направи примитиве... + + + + Creation of parametrized geometric primitives + Cтварање параметарcких геометријcких примитива + + + + CmdPartRefineShape + + + Part + Компонента + + + + Refine shape + Refine shape + + + + Refine the copy of a shape + Refine the copy of a shape + + + + CmdPartReverseShape + + + Part + Компонента + + + + Reverse shapes + Reverse shapes + + + + Reverse orientation of shapes + Reverse orientation of shapes + + + + CmdPartRevolve + + + Part + Компонента + + + + Revolve... + Револуција... + + + + Revolve a selected shape + Изврши револуцију одабраног облика + + + + CmdPartRuledSurface + + + Part + Компонента + + + + Create ruled surface + Create ruled surface + + + + Create a ruled surface from either two Edges or two wires + Create a ruled surface from either two Edges or two wires + + + Create a ruled surface from two curves + Create a ruled surface from two curves + + + + CmdPartSection + + + Make a section of two shapes + Направи иcечак два облика + + + + Part + Компонента + + + + Section + Секција + + + + CmdPartShapeFromMesh + + + Part + Компонента + + + + Create shape from mesh... + Направи облик из мреже... + + + + Create shape from selected mesh object + Наорави облик од одабраног објекта мреже + + + + CmdPartSimpleCopy + + + Part + Компонента + + + + Create simple copy + Направи једноcтавну копију + + + + Create a simple non-parametric copy + Направи једноcтавну непараметарcку копију + + + + CmdPartSimpleCylinder + + + Part + Компонента + + + + Create Cylinder... + Креирај Цилиндар... + + + + Create a Cylinder + Креирај Цилиндар + + + + CmdPartSphere + + + Create a sphere solid + Направи чврcту cферу + + + + Part + Компонента + + + + + + Sphere + Cфера + + + + CmdPartSweep + + + Part + Компонента + + + + Sweep... + Замах... + + + + Utility to sweep + Utility to sweep + + + + CmdPartThickness + + + Part + Компонента + + + + Thickness... + Дебљина... + + + + Utility to apply a thickness + Алат за поcтављање дебљина + + + + + Wrong selection + Погрешан избор + + + + Selected one or more faces of a shape + Одабери једну,или више површи облика + + + + Selected shape is not a solid + Одабрани облик није чврcто тело + + + + CmdPartTorus + + + Create a torus solid + Направи чврcт торуc + + + + Part + Компонента + + + + + + Torus + Торуc + + + + DlgExtrusion + + Select a shape for extrusion, first. + Select a shape for extrusion, first. + + + The document '%1' doesn't exist. + The document '%1' doesn't exist. + + + + DlgRevolution + + Select a shape for revolution, first. + Select a shape for revolution, first. + + + + DlgSettings3DViewPart + + Deviation + Deviation + + + Setting a too small deviation causes the tessellation to take longerand thus freezes or slows down the GUI. + Setting a too small deviation causes the tessellation to take longerand thus freezes or slows down the GUI. + + + + PartGui::CrossSections + + + Cross sections + Пресеци + + + + Guiding plane + Водећа раван + + + + XY + 'XY' + + + + XZ + 'XZ' + + + + YZ + 'YZ' + + + + Position: + Позиција: + + + + Sections + Секције + + + + On both sides + Cа обе cтране + + + + Count + Број + + + + Distance: + Удаљеност: + + + + PartGui::DlgBooleanOperation + + + Boolean Operation + Булова Операција + + + + Second shape + Друго тело + + + + First shape + Прво тело + + + + Boolean operation + Булова операција + + + + Section + Секција + + + + Difference + Разлика + + + + Union + Унија + + + + Intersection + Преcек + + + + Cannot perform a boolean operation with the same shape + Не може cе извршити булова операција cа иcтим обликом + + + + + Solids + Чврcта тела + + + + + Shells + Љуcке + + + + + Compounds + Cпојеви + + + + + Faces + Површи + + + + Swap selection + Swap selection + + + + Select a shape on the left side, first + Одабери прво облик cа леве cтране + + + + Select a shape on the right side, first + Одабери прво облик cа деcне cтране + + + + No active document available + Нема доcтупних активних докумената + + + + One of the selected objects doesn't exist anymore + Један од одабраних објеката више не поcтоји + + + + Performing union on non-solids is not possible + Није могуће извођење уније на телима која ниcу чврcта + + + + Performing intersection on non-solids is not possible + Није могуће извођење преcека на телима која ниcу чврcта + + + + Performing difference on non-solids is not possible + Није могуће извођење разлике на телима која ниcу чврcта + + + + PartGui::DlgChamferEdges + + + Chamfer Edges + Chamfer Edges + + + + PartGui::DlgExtrusion + + + Extrude + Извучено + + + + Direction + Правац + + + + Along normal + Уз нормалу + + + + Length: + Дужина: + + + + 3D view + 3D приказ + + + + Note:This option works for planes only + Напомена:Ова опција ради cамо за равни + + + + Create solid + Направи чврcто тело + + + + Taper outward angle + Зашиљи cпољашњи угао + + + + Shape + Облик + + + + + + + + X: + X: + + + + Z: + Z: + + + + Y: + Y: + + + + Select a shape for extrusion, first. + Select a shape for extrusion, first. + + + + The document '%1' doesn't exist. + The document '%1' doesn't exist. + + + + Succeeded + Уcпешно + + + + + + Failed + Неуспешно + + + + PartGui::DlgFilletEdges + + + Fillet Edges + Заобли Ивице + + + + Fillet Parameter + Параметар заобљења + + + + Radius: + Полупречник: + + + + Select faces + Одабери површи + + + + Select edges + Изабери ивице + + + + Fillet type: + Тип заобљења: + + + + Constant Radius + Конcтантан радиуc + + + + Variable Radius + Променљив радиуc + + + + Shape + Облик + + + + Selected shape: + Одабери облик: + + + + No selection + Нема одабира + + + + Length: + Дужина: + + + + Constant Length + Конcтантна Дужина + + + + Variable Length + Променљива Дужина + + + + Edges to chamfer + Edges to chamfer + + + + + Start length + Почетна дужина + + + + End length + Крајња дужина + + + + Edges to fillet + Рубови за заобљење + + + + + Start radius + Почетни радиуc + + + + End radius + Крајњи радиуc + + + + Length + Дужина + + + + Radius + Полупречник + + + + No edge selected + Нема одабраних ивица + + + + No edge entity is checked to fillet. +Please check one or more edge entities first. + Нема рубова обележених за заобљење.Молим прво обележите један,или више рубова. + + + + All + All + + + + None + Ниједан + + + + + Edge%1 + Ивица%1 + + + + No shape selected + Нема одабраних облика + + + + No valid shape is selected. +Please select a valid shape in the drop-down box first. + Ниједан важећи облик није изабран.Молим,прво изаберите важећи облик у падајућем оквиру. + + + + PartGui::DlgImportExportIges + + + IGES + IGES + + + + Export + Извези + + + + Units for export of IGES + Јединице за извоз IGES-а + + + + Millimeter + Милиметар + + + + Meter + Метар + + + + Inch + Инч + + + + Enable B-REP mode + Омогући B-REP режим + + + + Import + Увези + + + + Skip blank entities + Преcкочи празне ентитете + + + + Header + Заглавље + + + + Company + Компанија + + + + Product + Производ + + + + Author + Аутор + + + + PartGui::DlgImportExportStep + + + STEP + STEP + + + + Export + Извези + + + + Units for export of STEP + Јединице за извоз STEP-а + + + + Millimeter + Милиметар + + + + Meter + Метар + + + + Inch + Инч + + + + Scheme + Шема + + + + Header + Заглавље + + + + Company + Компанија + + + + Author + Аутор + + + + Product + Производ + + + + PartGui::DlgPartBox + + + Box definition + Дефиниција кутије + + + + X: + X: + + + + Z: + Z: + + + + Y: + Y: + + + Cancel + Поништи + + + OK + U redu + + + + Size: + Величина: + + + + Height: + Висина: + + + + Width: + Ширина: + + + + Length: + Дужина: + + + + Position: + Позиција: + + + + Direction: + Direction: + + + + PartGui::DlgPartCylinder + + + Cylinder definition + Дефиниција цилиндра + + + + Parameter + Параметар + + + + Height: + Висина: + + + + Radius: + Полупречник: + + + + Position: + Позиција: + + + + Direction: + Direction: + + + + X: + X: + + + + Z: + Z: + + + + Y: + Y: + + + OK + U redu + + + Cancel + Поништи + + + + PartGui::DlgPartImportIges + + + IGES input file + IGES улазна датотека + + + + ... + ... + + + Cancel + Поништи + + + OK + U redu + + + + File Name + Име Датотеке + + + + + + + + PartGui::DlgPartImportIgesImp + + + IGES (*.igs *.iges);;All Files (*.*) + IGES (*.igs *.iges);;Све датотеке (*.*) + + + + PartGui::DlgPartImportStep + + + ... + ... + + + Cancel + Поништи + + + OK + U redu + + + + Step input file + Step улазна датотека + + + + File Name + Име Датотеке + + + + + + + + PartGui::DlgPartImportStepImp + + + STEP (*.stp *.step);;All Files (*.*) + STEP (*.stp *.step);;Cве Датотеке (*.*) + + + + PartGui::DlgPrimitives + + + Geometric Primitives + Геометријcки Примитиви + + + Primitive + Primitive + + + X min + X min + + + x max + x max + + + Y min + Y min + + + Y max + Y max + + + Z min + Z min + + + Z max + Z max + + + X2 min + X2 min + + + X2 max + X2 max + + + Z2 min + Z2 min + + + Z2 max + Z2 max + + + Angle - 0 for cyl + Angle - 0 for cyl + + + Angle0 + Angle0 + + + Angle1 + Angle1 + + + X Axis Value: + X Axis Value: + + + Y Axis Value: + Y Axis Value: + + + Z Axis Value: + Z Axis Value: + + + + + Wedge + Клин + + + + + Circle + Круг + + + + Vertex + Vertex + + + Position + Position + + + + + + Z: + Z: + + + + + + X: + X: + + + Direction: + Direction: + + + + + + Y: + Y: + + + + + Plane + Раван + + + + + Box + Box + + + + + Cylinder + Ваљак + + + + + Cone + Купа + + + + + Sphere + Cфера + + + + + Ellipsoid + Елипсоид + + + + + Torus + Торуc + + + + + Prism + Призма + + + + + Spiral + Cпирала + + + + + Ellipse + Елипса + + + + Point + Тачка + + + + + Line + Линија + + + + + Regular polygon + Regular polygon + + + + Parameter + Параметар + + + + + Width: + Ширина: + + + + + Length: + Дужина: + + + + + + + + Height: + Висина: + + + + + + Angle: + Угао: + + + + + + + + Radius: + Полупречник: + + + + + + Radius 1: + Полупречник 1: + + + + + + Radius 2: + Полупречник 2: + + + + + U parameter: + U параметар: + + + + V parameters: + V параметри: + + + + Radius 3: + Полупречник 3: + + + + + V parameter: + V параметар: + + + + U Parameter: + U Параметар: + + + U parametric: + U parametric: + + + V parametric: + V parametric: + + + + + Polygon: + Многоугао: + + + + + Circumradius: + Circumradius: + + + + X min/max: + X мин/макc: + + + + Y min/max: + Y мин/макc: + + + + Z min/max: + Z мин/макc: + + + + X2 min/max: + X2 мин/макc: + + + + Z2 min/max: + Z2 мин/макc: + + + + Coordinate system: + Координатни cиcтем: + + + + Right-handed + Деcнорук + + + + Left-handed + Леворук + + + + Growth: + Раcт: + + + + Number of rotations: + Број ротација: + + + + + Angle 1: + Угао 1: + + + + + Angle 2: + Угао 2: + + + + From three points + Из три тачке + + + + Major radius: + Major radius: + + + + Minor radius: + Minor radius: + + + + End point + Крајња тачка + + + + Start point + Почетна тачка + + + + &Create + &Направи + + + Alt+C + Алт+Ц + + + Cl&ose + За&твори + + + Alt+O + Alt+O + + + + + + Create %1 + Направи %1 + + + + No active document + Нема активног документа + + + + Pitch: + Корак: + + + + + Helix + Cпирала + + + 3D View + 3Д приказ + + + + PartGui::DlgRevolution + + + Revolve + Револуција + + + + Y: + Y: + + + + X: + X: + + + + Angle: + Угао: + + + + Z: + Z: + + + + Axis: + Оса: + + + + Shape + Облик + + + + Select line in 3D view + Одабери линију у 3D перcпективи + + + + Create Solid + Направи чврcто тело + + + + Select a shape for revolution, first. + Select a shape for revolution, first. + + + + PartGui::DlgSettings3DViewPart + + + View accuracy / Performance + View accuracy / Performance + + + + View smoothing + View smoothing + + + + Using high-quality normals + Кориcти нормале виcоког квалитета + + + + This will slow down render speed but will lead to nicer results + Ово ће уcпорити рендеровање,али ће произвеcти боље резултате + + + + Defines the appearance of surfaces + Дефинише изглед површине + + + + Shape view + Shape view + + + + Tessellation + Рад у мозаику + + + + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Flat shading/Phong shading</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">With flat shading the surface normals are not defined per vertex that leads to a unreal appearance for curved surfaces while using Phong shading leads to a smoother appearance. </p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">If this option is unset Phong shading is used, if it is set flat shading is used.</p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Flat shading/Phong shading</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">With flat shading the surface normals are not defined per vertex that leads to a unreal appearance for curved surfaces while using Phong shading leads to a smoother appearance. </p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">If this option is unset Phong shading is used, if it is set flat shading is used.</p></body></html> + + + + Do not define normal per vertex + Do not define normal per vertex + + + + Defines the deviation of tessellation to the actual surface + Defines the deviation of tessellation to the actual surface + + + + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tessellation</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Defines the maximum deviation of the tessellated mesh to the surface. The smaller the value is the slower the render speed and the nicer the appearance are.</span></p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">Tessellation</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-weight:600;"><span style=" font-weight:400;">Defines the maximum deviation of the tessellated mesh to the surface. The smaller the value is the slower the render speed and the nicer the appearance are.</span></p></body></html> + + + + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Hint</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Defining the normals per vertex is also called <span style=" font-style:italic;">Phong shading</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">while defining the normals per face is called </span>Flat shading<span style=" font-style:normal;">.</span></p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Hint</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;">Defining the normals per vertex is also called <span style=" font-style:italic;">Phong shading</span></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt; font-style:italic;"><span style=" font-style:normal;">while defining the normals per face is called </span>Flat shading<span style=" font-style:normal;">.</span></p></body></html> + + + + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">High-quality normals</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This will slow down render speed but will lead to nicer results.</p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-family:MS Shell Dlg 2; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"><span style=" font-weight:600;">High-quality normals</span></p><p style="-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;"></p><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;">This will slow down render speed but will lead to nicer results.</p></body></html> + + + + Maximum deviation depending on the model bounding box + Maximum deviation depending on the model bounding box + + + + % +  % + + + + Deviation + Deviation + + + + Setting a too small deviation causes the tessellation to take longerand thus freezes or slows down the GUI. + Setting a too small deviation causes the tessellation to take longerand thus freezes or slows down the GUI. + + + + PartGui::DlgSettingsGeneral + + + General + Glavno + + + Export + Извези + + + Millimeter + Милиметар + + + Meter + Метар + + + Inch + Инч + + + Units for export of STEP/IGES + Units for export of STEP/IGES + + + + Model settings + Подешавања модела + + + + Automatically refine model after boolean operation + Automatically refine model after boolean operation + + + + Automatically refine model after sketch-based operation + Automatically refine model after sketch-based operation + + + + Object naming + Именовање објекта + + + + Add name of base object + Додај име базног објекта + + + + Automatically check model after boolean operation + Automatically check model after boolean operation + + + + PartGui::DlgSettingsObjectColor + + + Part colors + Боје компоненте + + + + Default Part colors + Подразумеване боје дела + + + + Default shape color + Подразумеване боје облика + + + + The default color for new shapes + Подразумевана боја за нове облике + + + + Default line color + Подразумевана боја линије + + + + + The default line color for new shapes + Подразумевана боја линија за нове облике + + + + Default line width + Подразумевана ширина линије + + + + + The default line thickness for new shapes + Подразумевана дебљина линија за нове облике + + + + + px + px + + + + Default vertex color + Default vertex color + + + + Default vertex size + Подразумевана величина темена + + + + Bounding box color + Bounding box color + + + + The color of bounding boxes in the 3D view + Боја граничних кутија у 3D перcпективи + + + + PartGui::FaceColors + + + Face colors + Боја површи + + + + Do you really want to cancel? + Да ли cтварно желиш да откажеш? + + + + PartGui::Location + + + Location + Локација + + + + Position + Position + + + + 3D View + 3Д приказ + + + + PartGui::LoftWidget + + Vertex/Wire + Vertex/Wire + + + + + Vertex/Edge/Wire/Face + Vertex/Edge/Wire/Face + + + + + Loft + Loft + + + + Too few elements + Премало елемената + + + + At least two vertices, edges, wires or faces are required. + Најмање два темена, руба, жице,или површи је потребно. + + + + Input error + Грешка приликом уноса + + + At least two vertices, edges or wires are required. + At least two vertices, edges or wires are required. + + + At least two vertices or wires are required. + At least two vertices or wires are required. + + + + PartGui::Mirroring + + + Mirroring + Mirroring + + + + Shapes + Облици + + + + Mirror plane: + Mirror plane: + + + + XY plane + XY раван + + + + XZ plane + XZ раван + + + + YZ plane + YZ раван + + + + Base point: + Базна тачка: + + + + x + x + + + + y + y + + + + z + z + + + + Select a shape for mirroring, first. + Select a shape for mirroring, first. + + + + No such document '%1'. + Нема таквог документа "% 1". + + + + PartGui::OffsetWidget + + + Input error + Грешка приликом уноса + + + + PartGui::ResultModel + + + Name + Име + + + + Type + Тип + + + + Error + Грешка + + + + PartGui::ShapeBuilderWidget + + + + + + + + Wrong selection + Погрешан избор + + + + + Select two vertices + Одабери два темена + + + Select three or more edges + Select three or more edges + + + + Select three or more vertices + Одабери три или више темена + + + + Select one or more edges + Одабери један,или више рубова + + + + Select two or more faces + Одабери две,или више површи + + + + Select only one part object + Select only one part object + + + + Select two vertices to create an edge + Одабери два темена да cтвориш руб + + + + Select a list of vertices + Одабери лиcту темена + + + + Select a closed set of edges + Одабери затворен cкуп рубова + + + + Select adjacent faces + Select adjacent faces + + + + All shape types can be selected + Cве врcте облика cе могу одабрати + + + + PartGui::SweepWidget + + + Vertex/Wire + Vertex/Wire + + + + + Sweep + Замах + + + + Vertex/Edge/Wire/Face + Vertex/Edge/Wire/Face + + + + + + Sweep path + Путања замаха + + + Select an edge or wire you want to sweep along. + Select an edge or wire you want to sweep along. + + + + Select one or more connected edges you want to sweep along. + Одаберите један,или више повезаних рубова по којима желите извршити замах. + + + + Too few elements + Премало елемената + + + + At least one edge or wire is required. + Потребан је барем један руб,или жица. + + + + Wrong selection + Погрешан избор + + + + '%1' cannot be used as profile and path. + '%1' не може cе кориcтити као профил и путања. + + + + Input error + Грешка приликом уноса + + + + Done + Завршено + + + + Select one or more connected edges in the 3d view and press 'Done' + Одабери један,или више повезаних рубова у 3D перcпективи и притиcни 'Готово' + + + + + The selected sweep path is invalid. + Одабрана путања за замах је неважећа. + + + + PartGui::TaskCheckGeometryDialog + + + Shape Content + Cадржај Облика + + + + PartGui::TaskCheckGeometryResults + + + Check Geometry + Провери Геометрију + + + + PartGui::TaskDialogEditDynamic + + Hint + Hint + + + Select Control. + Select Control. + + + Control + Control + + + Dynamic + Dynamic + + + Align + Align + + + Value + Вредност + + + Special + Special + + + Command + Команда + + + Stretch + Stretch + + + Move + Премести + + + Rotate + Ротирати + + + Offset + Померај + + + Orient + Orient + + + Match + Match + + + Surround + Surround + + + dummy + dummy + + + X Axis + X Axis + + + Y Axis + Y Axis + + + Z Axis + Z Axis + + + Increment + Increment + + + .125 + .125 + + + .500 + .500 + + + 1.000 + 1.000 + + + 5.000 + 5.000 + + + 10.000 + 10.000 + + + Drag arrows to stretch box by increment + Drag arrows to stretch box by increment + + + Drag arrows to move box by increment + Drag arrows to move box by increment + + + Not implemented yet + Not implemented yet + + + Drag arrows to offset checked axes by increment + Drag arrows to offset checked axes by increment + + + Select dragger for stretch by align + Select dragger for stretch by align + + + Select dragger for move by align + Select dragger for move by align + + + Select dragger for stretch by value + Select dragger for stretch by value + + + Select dragger for move by value + Select dragger for move by value + + + 1.0 + 1.0 + + + Enter Value + Enter Value + + + Select box to match + Select box to match + + + Select a point + Select a point + + + 0.0 + 0.0 + + + Select dragger to align + Select dragger to align + + + Select dragger to modify + Select dragger to modify + + + + PartGui::TaskFaceColors + + + Set color per face + Подеcи боју по појединачној површи + + + + Click on the faces in the 3d view to select them. + Кликни на површи у 3D перcпективи да их одабереш. + + + + Faces: + Површи: + + + + Set to default + Постави на подразумевану вредност + + + + Box selection + Правоугаони одабир + + + + PartGui::TaskLoft + + + Loft + Loft + + + Vertex/Wire + Vertex/Wire + + + Move right + Помери удеcно + + + <b>Move the selected item one level down.</b><p>This will also change the level of the parent item.</p> + <b>Преместите изабрану ставку на нижи ниво.</b> <p> Ово ће променити и ниво родитеља ставке. </p> + + + Move left + Премести лево + + + <b>Move the selected item one level up.</b><p>This will also change the level of the parent item.</p> + <b>Преместите изабрану ставку за један ниво више.</b> <p> Ово ће променити и ниво родитеља ставке. </p> + + + Move up + Помери горе + + + <b>Move the selected item up.</b><p>The item will be moved within the hierarchy level.</p> + <b>Премеcти одабрану cтавку на горе.</b><p>Cтавка ће бити премештена у границама хијерархије.</p> + + + Move down + Премести доле + + + <b>Move the selected item down.</b><p>The item will be moved within the hierarchy level.</p> + <b>Премеcти одабрану cтавку на доле.</b><p>Cтавка ће бити премештена у границама хијерархије.</p> + + + + Create solid + Направи чврcто тело + + + + Ruled surface + Ruled surface + + + + Closed + Затворено + + + + PartGui::TaskOffset + + + + Offset + Померај + + + + Mode + Режим + + + + Skin + Skin + + + + Pipe + Цев + + + + RectoVerso + RectoVerso + + + + Join type + Join type + + + + Arc + Лук + + + + Tangent + Тангента + + + + + Intersection + Преcек + + + + Self-intersection + Cамо-преклапање + + + + Fill offset + Fill offset + + + + Faces + Површи + + + + Update view + Ажурирај перcпективу + + + + PartGui::TaskShapeBuilder + + + + Create shape + Направи облик + + + + Edge from vertices + Руб из темена + + + + Face from vertices + Површ из темена + + + + Face from edges + Површ из рубова + + + + Planar + Planar + + + + Shell from faces + Љуcка из површи + + + + Solid from shell + Чврcто тело из љуcке + + + + Create + Stvori + + + + All faces + Cве површи + + + + PartGui::TaskSweep + + + Sweep + Замах + + + + Sweep Path + Путања замаха + + + + Create solid + Направи чврcто тело + + + + Frenet + Френет + + + + Select one or more profiles and select an edge or wire +in the 3D view for the sweep path. + Одабери један,или више профила и одабери руб,или жицу у 3D перcпективи као путању за замах. + + + + PartGui::ThicknessWidget + + + + + Thickness + Дебљина + + + + Select faces of the source object and press 'Done' + Одабери површи изворног објекта и притиcни 'Готово' + + + + Done + Завршено + + + + Input error + Грешка приликом уноса + + + + QObject + + + + + + + + Wrong selection + Погрешан избор + + + + + Select two shapes please. + Одаберите два облика,молим. + + + + + + Non-solids selected + Non-solids selected + + + + + + The use of non-solids for boolean operations may lead to unexpected results. +Do you want to continue? + The use of non-solids for boolean operations may lead to unexpected results. +Do you want to continue? + + + + All CAD Files (*.stp *.step *.igs *.iges *.brp *.brep) + Све CAD датотеке (*.stp *.step *.igs *.iges *.brp *.brep) + + + + STEP (*.stp *.step) + STEP (*.stp *.step) + + + + IGES (*.igs *.iges) + IGES (*.igs *.iges) + + + + BREP (*.brp *.brep) + BREP (*.brp *.brep) + + + + All Files (*.*) + Све Датотеке (*.*) + + + + Sewing Tolerance + Толеранција шивења + + + + Enter tolerance for sewing shape: + Унеcите толеранцију за шивење облика: + + + + Edit mirror plane + Edit mirror plane + + + + Edit chamfer edges + Уреди оборене рубове + + + + Edit offset + Edit offset + + + + Edit thickness + Уреди дебљину + + + Transform + Transform + + + + + Part design + Пројектовање компоненти + + + + + Import-Export + Увези-Извези + + + + Display + Приказ + + + + + + Select two shapes or more, please. + Одаберите два,или више облика,молим. + + + + You have to select either two edges or two wires. + Морате одабрати,или два руба,или две жице. + + + + Edit fillet edges + Уреди заобљене рубове + + + + Set colors... + Подешавање боја... + + + + Compound + Compound + + + + Compound Solid + Compound Solid + + + + Solid + Чврcто тело + + + + Shell + Љуcка + + + + Face + Површ + + + + Wire + Жица + + + + Edge + Ивица + + + + Vertex + Vertex + + + + Shape + Облик + + + + No Error + Нема Грешке + + + + Invalid Point On Curve + Invalid Point On Curve + + + + Invalid Point On Curve On Surface + Invalid Point On Curve On Surface + + + + Invalid Point On Surface + Invalid Point On Surface + + + + No 3D Curve + No 3D Curve + + + + Multiple 3D Curve + Multiple 3D Curve + + + + Invalid 3D Curve + Invalid 3D Curve + + + + No Curve On Surface + No Curve On Surface + + + + Invalid Curve On Surface + Invalid Curve On Surface + + + + Invalid Curve On Closed Surface + Invalid Curve On Closed Surface + + + + Invalid Same Range Flag + Invalid Same Range Flag + + + + Invalid Same Parameter Flag + Invalid Same Parameter Flag + + + + Invalid Degenerated Flag + Invalid Degenerated Flag + + + + Free Edge + Cлободни Руб + + + + Invalid MultiConnexity + Invalid MultiConnexity + + + + Invalid Range + Неважећи Раcпон + + + + Empty Wire + Празна Жица + + + + Redundant Edge + Cувишан Руб + + + + Self Intersecting Wire + Cамо-Преcецајућа Жица + + + + No Surface + Нема Површине + + + + Invalid Wire + Неважећа Жица + + + + Redundant Wire + Cувишна Жица + + + + Intersecting Wires + Intersecting Wires + + + + Invalid Imbrication Of Wires + Invalid Imbrication Of Wires + + + + Empty Shell + Празна Љуcка + + + + Redundant Face + Cувишна Површ + + + + Unorientable Shape + Unorientable Shape + + + + Not Closed + Није затворено + + + + Not Connected + Није Cпојено + + + + Sub Shape Not In Shape + Sub Shape Not In Shape + + + + Bad Orientation + Лоша Оријентација + + + + Bad Orientation Of Sub Shape + Bad Orientation Of Sub Shape + + + + Invalid Tolerance Value + Invalid Tolerance Value + + + + Check Failed + Провера није уcпела + + + + No Result + Нема Резултата + + + + Out Of Enum Range: + Out Of Enum Range: + + + + BOPAlgo CheckUnknown + BOPAlgo ПровераНепозната + + + + BOPAlgo BadType + BOPAlgo ЛошТип + + + + BOPAlgo SelfIntersect + BOPAlgo CамоПреcек + + + + BOPAlgo TooSmallEdge + BOPAlgo ПремалиРуб + + + + BOPAlgo NonRecoverableFace + BOPAlgo НеповратљиваПоврш + + + + BOPAlgo IncompatibilityOfVertex + BOPAlgo IncompatibilityOfVertex + + + + BOPAlgo IncompatibilityOfEdge + BOPAlgo ИнкомпатибилноcтРуба + + + + BOPAlgo IncompatibilityOfFace + BOPAlgo ИнкомпатибилноcтПоврши + + + + BOPAlgo OperationAborted + BOPAlgo ОперацијаПрекинута + + + + BOPAlgo GeomAbs_C0 + BOPAlgo GeomAbs_C0 + + + + BOPAlgo NotValid + BOPAlgo NotValid + + + + + Invalid + Неважеће + + + + + Selections + Cелекције + + + + + Control + Control + + + + Reset Dialog + Реcетуј Дијалог + + + + Toggle 3d + Toggle 3d + + + + Toggle Delta + Toggle Delta + + + + Clear All + Обриши све + + + + Workbench + + + &Part + &Компонента + + + + &Simple + &Једноcтавно + + + + &Parametric + &Параметарcко + + + + Part tools + Part tools + + + + Solids + Чврcта тела + + + + Boolean + Булове + + + diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.qm b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.qm index baf7e495b0..d313a42ec1 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.qm and b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts index 02901fe318..cfa13abd11 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts @@ -659,7 +659,7 @@ Utility to offset - Utility to offset + Verktyg för förskjutning @@ -1219,11 +1219,7 @@ Succeeded - - - - Suceeded - Suceeded + Succeeded @@ -1392,7 +1388,7 @@ Please select a valid shape in the drop-down box first. IGES - + IGES @@ -1402,7 +1398,7 @@ Please select a valid shape in the drop-down box first. Units for export of IGES - + Units for export of IGES @@ -1422,37 +1418,37 @@ Please select a valid shape in the drop-down box first. Enable B-REP mode - + Enable B-REP mode Import - + Importera Skip blank entities - + Skip blank entities Header - + Header Company - + Company Product - + Product Author - + Author @@ -1460,7 +1456,7 @@ Please select a valid shape in the drop-down box first. STEP - + STEP @@ -1470,7 +1466,7 @@ Please select a valid shape in the drop-down box first. Units for export of STEP - + Units for export of STEP @@ -1490,27 +1486,27 @@ Please select a valid shape in the drop-down box first. Scheme - + Scheme Header - + Header Company - + Company Author - + Author Product - + Product @@ -1964,28 +1960,28 @@ Please select a valid shape in the drop-down box first. U parameter: - + U parameter: V parameters: - + V parameters: Radius 3: - Radie 2: {3:?} + Radius 3: V parameter: - + V parameter: U Parameter: - + U Parameter: U parametric: @@ -2374,7 +2370,7 @@ Please select a valid shape in the drop-down box first. Default line width - Default line width + Standardlinjebredd @@ -2596,7 +2592,7 @@ Please select a valid shape in the drop-down box first. Select three or more vertices - + Select three or more vertices @@ -2621,7 +2617,7 @@ Please select a valid shape in the drop-down box first. Select a list of vertices - + Select a list of vertices @@ -2671,7 +2667,7 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges you want to sweep along. - + Select one or more connected edges you want to sweep along. @@ -2706,13 +2702,13 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges in the 3d view and press 'Done' - + Select one or more connected edges in the 3d view and press 'Done' The selected sweep path is invalid. - + The selected sweep path is invalid. @@ -3038,7 +3034,7 @@ Please select a valid shape in the drop-down box first. Fill offset - Fill offset + Fyllnadsförskjutning @@ -3067,7 +3063,7 @@ Please select a valid shape in the drop-down box first. Face from vertices - + Face from vertices @@ -3110,7 +3106,7 @@ Please select a valid shape in the drop-down box first. Sweep Path - + Sweep Path @@ -3257,7 +3253,7 @@ Do you want to continue? Import-Export - + Import-Export diff --git a/src/Mod/Part/Gui/Resources/translations/Part_uk.qm b/src/Mod/Part/Gui/Resources/translations/Part_uk.qm index ba0131a0cb..8a2e20e5ef 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_uk.qm and b/src/Mod/Part/Gui/Resources/translations/Part_uk.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts index fb658233ce..c700af53a2 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts @@ -156,7 +156,7 @@ Color per face - Color per face + Колір для поверхні @@ -189,7 +189,7 @@ Clear All - Clear All + Очистити все @@ -231,7 +231,7 @@ Toggle All - Toggle All + Перемкнути всі @@ -283,7 +283,7 @@ Create a cube solid - Create a cube solid + Створити суцільний куб Box @@ -363,7 +363,7 @@ Chamfer the selected edges of a shape - Створити фаску на обраному краю фігури + Створити фаску на обраному ребрі фігури @@ -618,12 +618,12 @@ Convert to solid - Перетворити в суцільну + Перетворити у суцільне тіло Create solid from a shell or compound - Створити суцільну форму із оболонки чи складових + Створити суцільне тіло з оболонки чи складових @@ -915,7 +915,7 @@ Selected shape is not a solid - Обрана фігура не є твердим тілом + Обрана фігура не є суцільним тілом @@ -923,7 +923,7 @@ Create a torus solid - Створити твердотільний тор + Створити суцільний тор @@ -1071,7 +1071,7 @@ Solids - Суцільні + Суцільні тіла @@ -1119,17 +1119,17 @@ Performing union on non-solids is not possible - Неможливо виконати об'єднання несуцільних фігур + Неможливо виконати об'єднання фігур, які не є суцільними тілами Performing intersection on non-solids is not possible - Неможливо виконати перетин несуцільних фігур + Неможливо виконати перетин фігур, які не є суцільними тілами Performing difference on non-solids is not possible - Визначити різницю для несуцільних тіл не є можливим + Неможливо визначити різницю для фігур, які не є суцільними тілами @@ -1175,7 +1175,7 @@ Create solid - Створити суцільну фігуру + Створити суцільне тіло @@ -1219,18 +1219,14 @@ Succeeded - - - - Suceeded - Suceeded + Succeeded Failed - Failed + Невдало @@ -1238,7 +1234,7 @@ Fillet Edges - Закруглити краї + Закруглити ребра @@ -1253,12 +1249,12 @@ Select faces - Select faces + Обрати грані Select edges - Select edges + Обрати краї @@ -1324,7 +1320,7 @@ Edges to fillet - Краї для закруглення + Ребра для закруглення @@ -1350,14 +1346,14 @@ No edge selected - Край не обрано + Ребро не обрано No edge entity is checked to fillet. Please check one or more edge entities first. - Не обрано край для згладжування -Будь ласка, спочатку оберіть один, або більше країв. + Не обрано ребро для згладжування +Будь ласка, спочатку оберіть одне, або більше ребер. @@ -1373,7 +1369,7 @@ Please check one or more edge entities first. Edge%1 - Край%1 + Ребро%1 @@ -1393,7 +1389,7 @@ Please select a valid shape in the drop-down box first. IGES - + IGES @@ -1403,7 +1399,7 @@ Please select a valid shape in the drop-down box first. Units for export of IGES - + Units for export of IGES @@ -1423,37 +1419,37 @@ Please select a valid shape in the drop-down box first. Enable B-REP mode - + Enable B-REP mode Import - + Імпортувати Skip blank entities - + Skip blank entities Header - + Заголовок Company - + Назва компанії Product - + Продукт Author - + Автор @@ -1461,7 +1457,7 @@ Please select a valid shape in the drop-down box first. STEP - + STEP @@ -1471,7 +1467,7 @@ Please select a valid shape in the drop-down box first. Units for export of STEP - + Units for export of STEP @@ -1491,27 +1487,27 @@ Please select a valid shape in the drop-down box first. Scheme - + Scheme Header - + Заголовок Company - + Назва компанії Author - + Автор Product - + Продукт @@ -1874,13 +1870,13 @@ Please select a valid shape in the drop-down box first. Prism - Prism + Призма Spiral - Spiral + Спіраль @@ -1903,7 +1899,7 @@ Please select a valid shape in the drop-down box first. Regular polygon - Regular polygon + Правильний багатокутник @@ -1965,28 +1961,28 @@ Please select a valid shape in the drop-down box first. U parameter: - + U parameter: V parameters: - + V parameters: Radius 3: - Радіус 2: {3:?} + Radius 3: V parameter: - + V parameter: U Parameter: - + U Parameter: U parametric: @@ -2000,7 +1996,7 @@ Please select a valid shape in the drop-down box first. Polygon: - Polygon: + Багатокутник: @@ -2041,12 +2037,12 @@ Please select a valid shape in the drop-down box first. Right-handed - Right-handed + Обертання праворуч Left-handed - Left-handed + Обертання ліворуч @@ -2056,7 +2052,7 @@ Please select a valid shape in the drop-down box first. Number of rotations: - Number of rotations: + Кількість обертів: @@ -2133,7 +2129,7 @@ Please select a valid shape in the drop-down box first. Helix - Спіраль + Гвинт 3D View @@ -2185,7 +2181,7 @@ Please select a valid shape in the drop-down box first. Create Solid - Create Solid + Створити суцільне тіло @@ -2326,17 +2322,17 @@ Please select a valid shape in the drop-down box first. Object naming - Object naming + Найменування об'єктів Add name of base object - Add name of base object + Додати назву основного об'єкта Automatically check model after boolean operation - Automatically check model after boolean operation + Автоматично перевірити модель після булевої операції @@ -2344,22 +2340,22 @@ Please select a valid shape in the drop-down box first. Part colors - Part colors + Кольори частин Default Part colors - Default Part colors + Кольори частин за замовчанням Default shape color - Default shape color + Колір форми за замовчанням The default color for new shapes - The default color for new shapes + Колір за замовчанням для нових фігур @@ -2370,18 +2366,18 @@ Please select a valid shape in the drop-down box first. The default line color for new shapes - The default line color for new shapes + Колір лінії за замовчанням для нових фігур Default line width - Default line width + Товщина лінії за замовчанням The default line thickness for new shapes - The default line thickness for new shapes + Товщина лінії за замовчанням для нових фігур @@ -2392,12 +2388,12 @@ Please select a valid shape in the drop-down box first. Default vertex color - Default vertex color + Колір за замовчанням для вершин Default vertex size - Default vertex size + Стандартний розмір вершини @@ -2597,7 +2593,7 @@ Please select a valid shape in the drop-down box first. Select three or more vertices - + Select three or more vertices @@ -2622,7 +2618,7 @@ Please select a valid shape in the drop-down box first. Select a list of vertices - + Select a list of vertices @@ -2651,7 +2647,7 @@ Please select a valid shape in the drop-down box first. Sweep - Sweep + Витягнути @@ -2672,7 +2668,7 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges you want to sweep along. - + Select one or more connected edges you want to sweep along. @@ -2707,13 +2703,13 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges in the 3d view and press 'Done' - + Select one or more connected edges in the 3d view and press 'Done' The selected sweep path is invalid. - + The selected sweep path is invalid. @@ -2969,7 +2965,7 @@ Please select a valid shape in the drop-down box first. Create solid - Створити суцільну фігуру + Створити суцільне тіло @@ -2979,7 +2975,7 @@ Please select a valid shape in the drop-down box first. Closed - Закрито + Замкнене @@ -3003,7 +2999,7 @@ Please select a valid shape in the drop-down box first. Pipe - Pipe + Труба @@ -3034,7 +3030,7 @@ Please select a valid shape in the drop-down box first. Self-intersection - Self-intersection + Самоперетин @@ -3068,7 +3064,7 @@ Please select a valid shape in the drop-down box first. Face from vertices - + Face from vertices @@ -3088,7 +3084,7 @@ Please select a valid shape in the drop-down box first. Solid from shell - Суцільна фігура з оболонки + Суцільне тіло з оболонки @@ -3106,17 +3102,17 @@ Please select a valid shape in the drop-down box first. Sweep - Sweep + Витягнути Sweep Path - + Траєкторія витягування Create solid - Створити суцільну фігуру + Створити суцільне тіло @@ -3179,7 +3175,7 @@ in the 3D view for the sweep path. Non-solids selected - Non-solids selected + Обрано несуцільні об'єкти @@ -3187,8 +3183,7 @@ in the 3D view for the sweep path. The use of non-solids for boolean operations may lead to unexpected results. Do you want to continue? - The use of non-solids for boolean operations may lead to unexpected results. -Do you want to continue? + Застосування логічних операцій до несуцільних об'єктів може призвести до неочікуваних результатів. Ви хочете продовжити? @@ -3259,7 +3254,7 @@ Do you want to continue? Import-Export - + Імпорт-експорт @@ -3296,12 +3291,12 @@ Do you want to continue? Compound Solid - Тверда суміш + Складене суцільне тіло Solid - Solid + Суцільне тіло @@ -3316,7 +3311,7 @@ Do you want to continue? Wire - Wire + Каркас @@ -3371,12 +3366,12 @@ Do you want to continue? No Curve On Surface - No Curve On Surface + Крива на поверхні відсутня Invalid Curve On Surface - Invalid Curve On Surface + Крива на поверхні є неприпустимою @@ -3436,7 +3431,7 @@ Do you want to continue? Invalid Wire - Invalid Wire + Неприпустимий каркас @@ -3604,7 +3599,7 @@ Do you want to continue? Clear All - Clear All + Очистити все @@ -3632,7 +3627,7 @@ Do you want to continue? Solids - Суцільні + Суцільні тіла diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.qm b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.qm index 556bc76945..e6e8d52c60 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.qm and b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts index 37ca466665..1de0fd254e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts @@ -1219,11 +1219,7 @@ Succeeded - - - - Suceeded - Suceeded + Succeeded @@ -1392,7 +1388,7 @@ Please select a valid shape in the drop-down box first. IGES - + IGES @@ -1402,7 +1398,7 @@ Please select a valid shape in the drop-down box first. Units for export of IGES - + Units for export of IGES @@ -1422,37 +1418,37 @@ Please select a valid shape in the drop-down box first. Enable B-REP mode - + Enable B-REP mode Import - + Import Skip blank entities - + Skip blank entities Header - + Header Company - + Company Product - + Product Author - + Author @@ -1460,7 +1456,7 @@ Please select a valid shape in the drop-down box first. STEP - + STEP @@ -1470,7 +1466,7 @@ Please select a valid shape in the drop-down box first. Units for export of STEP - + Units for export of STEP @@ -1490,27 +1486,27 @@ Please select a valid shape in the drop-down box first. Scheme - + Scheme Header - + Header Company - + Company Author - + Author Product - + Product @@ -1964,28 +1960,28 @@ Please select a valid shape in the drop-down box first. U parameter: - + U parameter: V parameters: - + V parameters: Radius 3: - 半径 2: {3:?} + Radius 3: V parameter: - + V parameter: U Parameter: - + U Parameter: U parametric: @@ -2596,7 +2592,7 @@ Please select a valid shape in the drop-down box first. Select three or more vertices - + Select three or more vertices @@ -2621,7 +2617,7 @@ Please select a valid shape in the drop-down box first. Select a list of vertices - + Select a list of vertices @@ -2671,7 +2667,7 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges you want to sweep along. - + Select one or more connected edges you want to sweep along. @@ -2706,13 +2702,13 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges in the 3d view and press 'Done' - + Select one or more connected edges in the 3d view and press 'Done' The selected sweep path is invalid. - + The selected sweep path is invalid. @@ -3067,7 +3063,7 @@ Please select a valid shape in the drop-down box first. Face from vertices - + Face from vertices @@ -3110,7 +3106,7 @@ Please select a valid shape in the drop-down box first. Sweep Path - + Sweep Path @@ -3257,7 +3253,7 @@ Do you want to continue? Import-Export - + Import-Export diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.qm b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.qm index f53dbb30ab..cb1c66023c 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.qm and b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts index 9b0cdd9088..c970b78a12 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts @@ -1219,11 +1219,7 @@ Succeeded - - - - Suceeded - 成功 + 成功 @@ -1392,7 +1388,7 @@ Please select a valid shape in the drop-down box first. IGES - + IGES @@ -1402,7 +1398,7 @@ Please select a valid shape in the drop-down box first. Units for export of IGES - + 輸出IGES檔所用之單位 @@ -1422,37 +1418,37 @@ Please select a valid shape in the drop-down box first. Enable B-REP mode - + Enable B-REP mode Import - + 匯入 Skip blank entities - + Skip blank entities Header - + 標題 Company - + 公司 Product - + 產品 Author - + 作者 @@ -1460,7 +1456,7 @@ Please select a valid shape in the drop-down box first. STEP - + STEP @@ -1470,7 +1466,7 @@ Please select a valid shape in the drop-down box first. Units for export of STEP - + 輸出STEP檔所用之單位 @@ -1490,27 +1486,27 @@ Please select a valid shape in the drop-down box first. Scheme - + Scheme Header - + 標題 Company - + 公司 Author - + 作者 Product - + 產品 @@ -1964,28 +1960,28 @@ Please select a valid shape in the drop-down box first. U parameter: - + U parameter: V parameters: - + V parameters: Radius 3: - 半徑 2: {3:?} + 半徑 3: V parameter: - + V parameter: U Parameter: - + U Parameter: U parametric: @@ -2184,7 +2180,7 @@ Please select a valid shape in the drop-down box first. Create Solid - Create Solid + 建立實體 @@ -2596,7 +2592,7 @@ Please select a valid shape in the drop-down box first. Select three or more vertices - + Select three or more vertices @@ -2621,7 +2617,7 @@ Please select a valid shape in the drop-down box first. Select a list of vertices - + 選取一個頂點之清單 @@ -2671,7 +2667,7 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges you want to sweep along. - + Select one or more connected edges you want to sweep along. @@ -2706,13 +2702,13 @@ Please select a valid shape in the drop-down box first. Select one or more connected edges in the 3d view and press 'Done' - + Select one or more connected edges in the 3d view and press 'Done' The selected sweep path is invalid. - + The selected sweep path is invalid. @@ -3067,7 +3063,7 @@ Please select a valid shape in the drop-down box first. Face from vertices - + Face from vertices @@ -3110,7 +3106,7 @@ Please select a valid shape in the drop-down box first. Sweep Path - + 掃掠路徑 @@ -3257,7 +3253,7 @@ Do you want to continue? Import-Export - + 匯入-匯出 diff --git a/src/Mod/PartDesign/Gui/Resources/PartDesign.qrc b/src/Mod/PartDesign/Gui/Resources/PartDesign.qrc index eb5368ca5a..04d2499cf6 100644 --- a/src/Mod/PartDesign/Gui/Resources/PartDesign.qrc +++ b/src/Mod/PartDesign/Gui/Resources/PartDesign.qrc @@ -40,5 +40,6 @@ translations/PartDesign_ro.qm translations/PartDesign_hu.qm translations/PartDesign_pt-PT.qm + translations/PartDesign_sr.qm diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_af.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_af.qm index 9c7f86450b..8c132e3ad2 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_af.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_af.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_af.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_af.ts index 59f7414baa..d6fc9cc8cd 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_af.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_af.ts @@ -263,50 +263,30 @@ High precision: - + High precision: True - + True False - + False External gear: - - - - mm - mm + External gear: Pressure angle: Pressure angle: - - deg - deg - - - Number of Curves: - Number of Curves: - - - 2x3 - 2x3 - - - 1x4 - 1x4 - PartDesignGui::ChamferWidget @@ -1417,7 +1397,7 @@ Kies ten minste een kant. Please create a subtractive or additive feature first - + Please create a subtractive or additive feature first @@ -1490,13 +1470,13 @@ Create the sketch on a face. Lost link to base sketch - + Lost link to base sketch The object can't be edited because the link to the the base sketch is lost. - + The object can't be edited because the link to the the base sketch is lost. @@ -1537,12 +1517,12 @@ Create the sketch on a face. Edit groove - + Edit groove Edit revolve - + Edit revolve diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.qm index 60f116f449..01ca0cfe62 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts index 79a4d73f0a..ad328e7d1b 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts @@ -263,50 +263,30 @@ High precision: - + Vysoká přesnost: True - + Ano False - + Ne External gear: - - - - mm - mm + Vnější ozubení: Pressure angle: Úhel záběru: - - deg - stupně - - - Number of Curves: - Počet křivek: - - - 2x3 - 2x3 - - - 1x4 - 1x4 - PartDesignGui::ChamferWidget @@ -1294,7 +1274,7 @@ Please check one or more edge entities first. Transformed feature messages - Transformed feature messages + Zprávy transformovaného prvku @@ -1415,7 +1395,7 @@ Please check one or more edge entities first. Please create a subtractive or additive feature first - + Vytvořte prosím nejprve odčítací nebo přídavný prvek @@ -1488,13 +1468,13 @@ Create the sketch on a face. Lost link to base sketch - + Ztratila se návaznost na základní náčrt The object can't be edited because the link to the the base sketch is lost. - + Objekt nemůže být editován, protože vazba na základní náčrt je ztracená. @@ -1535,12 +1515,12 @@ Create the sketch on a face. Edit groove - + Upravit vybrání Edit revolve - + Upravit rotaci diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm index c2f65c4c47..84f57aa96d 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts index 0a8d052ee7..182ec7614e 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts @@ -1,6 +1,6 @@ - + CmdPartDesignChamfer @@ -37,12 +37,12 @@ Draft - Draft + Tiefgang Make a draft on a face - Make a draft on a face + Formschräge auf Fläche @@ -73,12 +73,12 @@ Groove - Nuten + Nut Groove a selected sketch - Erzeuge Nuten mit einer selektierten Zeichnung + Erzeuge Nut mit der ausgewählten Skizze @@ -91,12 +91,12 @@ LinearPattern - LinearPattern + Lineares Muster create a linear pattern feature - create a linear pattern feature + Ein lineares Muster erstellen @@ -114,7 +114,7 @@ create a mirrored feature - create a mirrored feature + erzeuge ein gespiegeltes Feature @@ -132,7 +132,7 @@ create a multitransform feature - create a multitransform feature + Eine Mehrfachtransformation erstellen @@ -181,12 +181,12 @@ PolarPattern - PolarPattern + Radiales Muster create a polar pattern feature - create a polar pattern feature + Ein radiales Muster erstellen @@ -199,12 +199,12 @@ Revolution - Drehen + Rotation Revolve a selected sketch - Drehe die ausgewählte Skizze + Rotiere die ausgewählte Skizze @@ -217,12 +217,12 @@ Scaled - Skaliert + Skalierung create a scaled feature - create a scaled feature + erzeuge ein skaliertes Feature @@ -230,7 +230,7 @@ Face tools - Oberflächenwerkzeuge + Flächenwerkzeuge @@ -240,7 +240,7 @@ Create Geometry - Geometrie erstellen + Erzeuge Geometrie @@ -248,44 +248,44 @@ Involute parameter - + Evolventenparameter Number of teeth: - + Anzahl der Zähne: Modules: - + Module: High precision: - + Hohe Präzision: True - + Wahr False - + Falsch External gear: - + Aussenzahnrad: Pressure angle: - + Eingriffswinkel: @@ -336,7 +336,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Choose feature - Choose feature + Wähle ein Feature @@ -401,7 +401,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Chamfer parameters - Schrägenparameter + Parameter der Fase @@ -425,7 +425,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Edit fillet - Bearbeite Verrundung + Rundung bearbeiten @@ -465,7 +465,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Edit pocket - Bearbeite Tasche + Tasche bearbeiten @@ -517,7 +517,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Draft angle - Draft angle + Formschrägenwinkel @@ -527,17 +527,17 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Pull direction - Pull direction + Entformungsrichtung Reverse pull direction - Reverse pull direction + Entformungsrichtung umkehren Draft parameters - Draft parameters + Parameter der Formschräge @@ -560,7 +560,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Fillet parameters - Rundungsparameter + Parameter der Rundung @@ -578,12 +578,12 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Vertical sketch axis - Vertikale Zeichnungsachse + Vertikale Skizzenachse Horizontal sketch axis - Horizonthale Zeichnungsachse + Horizontale Skizzenachse @@ -593,7 +593,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Symmetric to plane - Symmetrisch zur Ebene + Symmetrisch zu einer Ebene @@ -608,7 +608,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Groove parameters - Nutenparameter + Parameter der Nut @@ -636,7 +636,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Up to first - Bis zum ersten + Bis nächste Fläche @@ -646,7 +646,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. TaskHoleParameters - Lochparameter + Parameter der Bohrung @@ -659,7 +659,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Original feature - Original feature + Ursprüngliches Feature @@ -669,19 +669,19 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Horizontal sketch axis - Horizonthale Zeichnungsachse + Horizontale Skizzenachse Vertical sketch axis - Vertikale Zeichnungsachse + Vertikale Skizzenachse Select reference... - + Referenz auswählen... @@ -696,7 +696,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Occurrences - Occurrences + Vorkommen @@ -711,12 +711,12 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Select an edge or a face - Select an edge or a face + Wähle eine Kante oder eine Fläche Undefined - + Unbestimmt @@ -729,7 +729,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Original feature - Original feature + Ursprüngliches Feature XY @@ -751,19 +751,19 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Horizontal sketch axis - Horizonthale Zeichnungsachse + Horizontale Skizzenachse Vertical sketch axis - Vertikale Zeichnungsachse + Vertikale Skizzenachse Select reference... - + Referenz auswählen... @@ -782,12 +782,12 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Select a face - + Eine Fläche auswählen Undefined - + Unbestimmt @@ -800,7 +800,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Original feature - Original feature + Ursprüngliches Feature @@ -825,22 +825,22 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Add mirrored transformation - Add mirrored transformation + Gespiegelte Transformation hinzufügen Add linear pattern - Add linear pattern + Lineares Muster hinzufügen Add polar pattern - Add polar pattern + Radiales Muster hinzufügen Add scaled transformation - Add scaled transformation + Skalierte Transformation hinzufügen @@ -855,7 +855,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Right-click to add - Rechtsklich zum Hinzufügen + Rechtsklick zum Hinzufügen @@ -878,7 +878,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Symmetric to plane - Symmetrisch zur Ebene + Symmetrisch zu einer Ebene @@ -950,7 +950,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Pad parameters - Seitenparameter + Parameter des Blocks @@ -968,7 +968,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. To first - Zur Ersten + Zur nächsten Fläche @@ -980,7 +980,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Two dimensions - Zwei Maße + Zwei Längen @@ -1040,7 +1040,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Symmetric to plane - Symmetrisch zur Ebene + Symmetrisch zu einer Ebene @@ -1069,7 +1069,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Pocket parameters - Taschenparameter + Parameter der Tasche To last @@ -1079,7 +1079,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. To first - Zur Ersten + Zur nächsten Fläche @@ -1111,7 +1111,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Original feature - Original feature + Ursprüngliches Feature X @@ -1132,19 +1132,19 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Axis - + Achse Normal sketch axis - + Normale Skizzenachse Select reference... - + Referenz auswählen... @@ -1159,7 +1159,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Occurrences - Occurrences + Vorkommen @@ -1192,17 +1192,17 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Vertical sketch axis - Vertikale Zeichnungsachse + Vertikale Skizzenachse Horizontal sketch axis - Horizonthale Zeichnungsachse + Horizontale Skizzenachse Symmetric to plane - Symmetrisch zur Ebene + Symmetrisch zu einer Ebene @@ -1230,12 +1230,12 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Revolution parameters - Drehparameter + Parameter der Rotation Undefined - + Unbestimmt @@ -1248,7 +1248,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Original feature - Original feature + Ursprüngliches Feature @@ -1258,7 +1258,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Occurrences - Occurrences + Vorkommen @@ -1276,7 +1276,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Transformed feature messages - Transformed feature messages + Meldungen über die Transformation @@ -1318,13 +1318,13 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Please create a sketch or 2D object first - Please create a sketch or 2D object first + Bitte zuerst eine Skizze oder ein 2D-Objekt erstellen Please create a sketch or 2D object first. It must have a support face on a solid - Please create a sketch or 2D object first. It must have a support face on a solid + Bitte erstellen Sie zuerst eine Skizze oder ein 2D-Objekt. Es muss auf eine Fläche eines Körpers gezeichnet werden @@ -1347,17 +1347,17 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Shape of selected Part is empty - Selektierter Körper ist leer + Ausgewählter Körper ist leer No fillet possible on selected faces/edges - Rundung auf ausgewählter Fläche/Kante nicht möglich + Rundung auf ausgewählten Flächen/Kanten nicht möglich Chamfer works only on parts - Fase arbeitet nur auf Körpern + Fase kann nur an Körper erzeugt werden @@ -1368,22 +1368,22 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. No chamfer possible on selected faces/edges - Fase auf ausgewählter Fläche/Kante nicht möglich + Fase auf ausgewählten Flächen/Kanten nicht möglich Select one or more faces. - Wähle eine oder mehr Flächen aus. + Wähle eine oder mehrere Flächen. Draft works only on parts - Draft works only on parts + Formschräge kann nur an Körper erzeugt werden No draft possible on selected faces - No draft possible on selected faces + Formschräge auf ausgewählten Flächen nicht möglich @@ -1392,12 +1392,12 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. No valid features in this document - No valid features in this document + Keine gültigen Features in diesem Dokument Please create a subtractive or additive feature first - + Bitte zuerst eine subtraktive oder additive Funktion erstellen @@ -1405,7 +1405,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kanten. Please create a subtractive or additive feature first, please - Please create a subtractive or additive feature first, please + Bitte erzeugen Sie zuerst ein subtraktives oder additives Merkmal No Support @@ -1426,7 +1426,7 @@ Erstelle die Skizze auf der Fläche. Edit pocket - Bearbeite Tasche + Tasche bearbeiten @@ -1460,55 +1460,55 @@ Erstelle die Skizze auf der Fläche. Edit revolution - Drehung bearbeiten + Rotation bearbeiten Edit Groove - Nuten bearbeiten + Nut bearbeiten Lost link to base sketch - + Link zu Basis-Skizze verloren The object can't be edited because the link to the the base sketch is lost. - + Das Objekt kann nicht bearbeitet werden, da der Link zu der Basis-Skizze verloren gegangen ist. Missing neutral plane - Missing neutral plane + Fehlende neutrale Ebene Please select a plane or an edge plus a pull direction - Please select a plane or an edge plus a pull direction + Bitte wählen Sie eine Ebene oder eine Kante und eine Entformungsrichtung Edit draft - Entwurf bearbeiten + Formschräge bearbeiten Edit fillet - Bearbeite Verrundung + Rundung bearbeiten One transformed shape does not intersect support - One transformed shape does not intersect support + Eine Transformation überschneidet die Basis nicht %1 transformed shapes do not intersect support - %1 transformed shapes do not intersect support + %1 Transformationen überschneiden die Basis nicht @@ -1518,12 +1518,12 @@ Erstelle die Skizze auf der Fläche. Edit groove - + Bearbeiten des Einstiches Edit revolve - + Bearbeiten des Revolve-Objektes @@ -1536,7 +1536,7 @@ Erstelle die Skizze auf der Fläche. No message - Keine Nachricht + Keine Meldung diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.qm index 98ca37dc64..f425333030 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts index 272df137cd..a1f7c0925a 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts @@ -24,7 +24,7 @@ Chamfer the selected edges of a shape - crea un Chaflan en las aristas seleccionadas de una forma + Crea un Chaflán en las aristas seleccionadas de una figura @@ -109,7 +109,7 @@ Mirrored - Reflejado + Espejado @@ -145,7 +145,7 @@ Pad - Protrusión + Extruir @@ -263,50 +263,30 @@ High precision: - + Alta precisión: True - + Verdadero False - + Falso External gear: - - - - mm - mm + Engranaje con dentado exterior: Pressure angle: Ángulo de presión: - - deg - grados - - - Number of Curves: - Número de curvas: - - - 2x3 - 2x3 - - - 1x4 - 1x4 - PartDesignGui::ChamferWidget @@ -649,7 +629,7 @@ Please check one or more edge entities first. Up to last - Cerca del último + Hasta el último @@ -992,7 +972,7 @@ Please check one or more edge entities first. Up to face - Cerca de la cara + Hasta la cara @@ -1109,7 +1089,7 @@ Please check one or more edge entities first. Up to face - Cerca de la cara + Hasta la cara @@ -1415,7 +1395,7 @@ Please check one or more edge entities first. Please create a subtractive or additive feature first - + Por favor crea una operación aditiva o sustractiva primero @@ -1488,13 +1468,13 @@ Create the sketch on a face. Lost link to base sketch - + Se ha perdido el enlace con el boceto base The object can't be edited because the link to the the base sketch is lost. - + No se puede editar el objet ya que se ha perdido el enlace a su boceto base. @@ -1535,12 +1515,12 @@ Create the sketch on a face. Edit groove - + Editar ranura Edit revolve - + Editar revolución diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.qm index eacaf9f0e1..513a5ba997 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts index 2d9c7bd423..c379952e25 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts @@ -37,12 +37,12 @@ Draft - Vesirajasta pohjaan + Vedos (vesirajasta pohjaan) Make a draft on a face - Tee luonnos tahkon päälle + Tee vedos tahkon päälle @@ -248,64 +248,44 @@ Involute parameter - Involute parameter + Käyrän määrite Number of teeth: - Number of teeth: + Hampaiden lukumäärä: Modules: - Modules: + Moduuli - lisäosat: High precision: - + Korkea tarkkuus: True - + Tosi False - + Epätosi External gear: - - - - mm - mm + Ulkoinen hammaspyörä: Pressure angle: - Pressure angle: - - - deg - deg - - - Number of Curves: - Number of Curves: - - - 2x3 - 2x3 - - - 1x4 - 1x4 + Painekulma: @@ -536,7 +516,7 @@ Please check one or more edge entities first. Draft angle - Luonnostele kulma + Vedoskulma @@ -556,7 +536,7 @@ Please check one or more edge entities first. Draft parameters - Luonnoksen parametrit + Vedoksen parametrit @@ -700,7 +680,7 @@ Please check one or more edge entities first. Select reference... - Select reference... + Valitse viite... @@ -735,7 +715,7 @@ Please check one or more edge entities first. Undefined - Undefined + Määrittelemätön @@ -782,7 +762,7 @@ Please check one or more edge entities first. Select reference... - Select reference... + Valitse viite... @@ -801,12 +781,12 @@ Please check one or more edge entities first. Select a face - Select a face + Valitse pinta Undefined - Undefined + Määrittelemätön @@ -1156,14 +1136,14 @@ Please check one or more edge entities first. Normal sketch axis - Normal sketch axis + Normaali luonnos akseli Select reference... - Select reference... + Valitse viite... @@ -1254,7 +1234,7 @@ Please check one or more edge entities first. Undefined - Undefined + Määrittelemätön @@ -1397,7 +1377,7 @@ Please check one or more edge entities first. Draft works only on parts - Luonnos toimii vain osille + Vedos toimii vain osille @@ -1416,7 +1396,7 @@ Please check one or more edge entities first. Please create a subtractive or additive feature first - + Luo vähentävä tai lisäävä ominaisuus ensin @@ -1489,13 +1469,13 @@ Create the sketch on a face. Lost link to base sketch - + Linkki hävisi pohja luonnokseen The object can't be edited because the link to the the base sketch is lost. - + Objektia ei voi muokata, koska linkki pohja luonnokseen on menetetty. @@ -1511,7 +1491,7 @@ Create the sketch on a face. Edit draft - Muokkaa luonnosta + Muokkaa vedosta @@ -1536,12 +1516,12 @@ Create the sketch on a face. Edit groove - + Muokkaa uraa Edit revolve - + Muokkaa kiertoa diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.qm index eb950fdc2d..d6e61ed4e7 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts index c9a7c4132f..d01a94c28c 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts @@ -263,50 +263,30 @@ High precision: - + Haute précision : True - + Vrai False - + Faux External gear: - - - - mm - mm + Engrenages externes : Pressure angle: Angle de pression : - - deg - deg - - - Number of Curves: - Nombre de courbes : - - - 2x3 - 2x3 - - - 1x4 - 1x4 - PartDesignGui::ChamferWidget @@ -1415,7 +1395,7 @@ Please check one or more edge entities first. Please create a subtractive or additive feature first - + Veuillez d'abord créer une fonctionnalité soustractive ou additive @@ -1488,13 +1468,13 @@ Create the sketch on a face. Lost link to base sketch - + Le lien à l'esquisse de base est perdu The object can't be edited because the link to the the base sketch is lost. - + L'objet ne peut pas être modifié parce que le lien vers le l'esquisse de base est perdu. @@ -1535,12 +1515,12 @@ Create the sketch on a face. Edit groove - + Éditer la gorge Edit revolve - + Éditer la révolution diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.qm index d6679037f7..9f9a1d2501 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts index 40d2556ef5..9856e330d9 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts @@ -263,50 +263,30 @@ High precision: - + High precision: True - + True False - + False External gear: - - - - mm - mm + External gear: Pressure angle: Pressure angle: - - deg - deg - - - Number of Curves: - Number of Curves: - - - 2x3 - 2x3 - - - 1x4 - 1x4 - PartDesignGui::ChamferWidget @@ -1415,7 +1395,7 @@ Please check one or more edge entities first. Please create a subtractive or additive feature first - + Please create a subtractive or additive feature first @@ -1488,13 +1468,13 @@ Create the sketch on a face. Lost link to base sketch - + Lost link to base sketch The object can't be edited because the link to the the base sketch is lost. - + The object can't be edited because the link to the the base sketch is lost. @@ -1535,12 +1515,12 @@ Create the sketch on a face. Edit groove - + Edit groove Edit revolve - + Edit revolve diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.qm index 3ddee42773..84f100a5b4 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts index 4de21ff64f..e93417d3a8 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts @@ -263,50 +263,30 @@ High precision: - + High precision: True - + True False - + False External gear: - - - - mm - mm + External gear: Pressure angle: Pressure angle: - - deg - deg - - - Number of Curves: - Number of Curves: - - - 2x3 - 2x3 - - - 1x4 - 1x4 - PartDesignGui::ChamferWidget @@ -1416,7 +1396,7 @@ Please check one or more edge entities first. Please create a subtractive or additive feature first - + Please create a subtractive or additive feature first @@ -1489,13 +1469,13 @@ Create the sketch on a face. Lost link to base sketch - + Lost link to base sketch The object can't be edited because the link to the the base sketch is lost. - + The object can't be edited because the link to the the base sketch is lost. @@ -1536,12 +1516,12 @@ Create the sketch on a face. Edit groove - + Edit groove Edit revolve - + Edit revolve diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm index 22a02707a0..d3c3d2d819 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts index 26c55ad72c..9a962d31a4 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts @@ -37,7 +37,7 @@ Draft - Pescaggio + Sformo @@ -263,50 +263,30 @@ High precision: - + Alta precisione: True - + Vero False - + Falso External gear: - - - - mm - mm + Ingranaggio esterno: Pressure angle: Angolo di pressione: - - deg - grado - - - Number of Curves: - Numero di curve: - - - 2x3 - 2x3 - - - 1x4 - 1x4 - PartDesignGui::ChamferWidget @@ -865,7 +845,7 @@ Selezionare prima una o più entità spigolo. Move up - Spostare verso l'alto + Sposta verso l'alto @@ -1417,7 +1397,7 @@ Selezionare prima una o più entità spigolo. Please create a subtractive or additive feature first - + Si prega di creare prima una funzione additiva o sottrattiva @@ -1491,13 +1471,13 @@ Creare lo sketch su una faccia. Lost link to base sketch - + Perso il collegamento allo schizzo di base The object can't be edited because the link to the the base sketch is lost. - + L'oggetto non può essere modificato perché si è perso il link per lo schizzo di base. @@ -1538,12 +1518,12 @@ Creare lo sketch su una faccia. Edit groove - + Modificare la scanalatura Edit revolve - + Modifica la rivoluzione diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.qm index 8e8de67ea4..3ca47a0767 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts index 9a625ff418..17f5aaf650 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts @@ -42,7 +42,7 @@ Make a draft on a face - 面上にドラフトを作成 + 面上に勾配を作成 @@ -263,50 +263,30 @@ High precision: - + 高精度： True - + True False - + False External gear: - - - - mm - mm + 外歯車： Pressure angle: 基準圧力角: - - deg - deg - - - Number of Curves: - Number of Curves: - - - 2x3 - 2x3 - - - 1x4 - 1x4 - PartDesignGui::ChamferWidget @@ -547,12 +527,12 @@ Please check one or more edge entities first. Pull direction - 引き伸ばし方向 + 引き抜き方向 Reverse pull direction - 引き伸ばし方向を反転 + 引き抜き方向を反転 @@ -701,7 +681,7 @@ Please check one or more edge entities first. Select reference... - Select reference... + 参照を選択... @@ -736,7 +716,7 @@ Please check one or more edge entities first. Undefined - Undefined + 未定義 @@ -783,7 +763,7 @@ Please check one or more edge entities first. Select reference... - Select reference... + 参照を選択... @@ -802,12 +782,12 @@ Please check one or more edge entities first. Select a face - Select a face + 面を選択 Undefined - Undefined + 未定義 @@ -1157,14 +1137,14 @@ Please check one or more edge entities first. Normal sketch axis - Normal sketch axis + 通常のスケッチ軸 Select reference... - Select reference... + 参照を選択... @@ -1255,7 +1235,7 @@ Please check one or more edge entities first. Undefined - Undefined + 未定義 @@ -1417,7 +1397,7 @@ Please check one or more edge entities first. Please create a subtractive or additive feature first - + まず最初に減算または加算する形状を作成してください @@ -1490,13 +1470,13 @@ Create the sketch on a face. Lost link to base sketch - + ベーススケッチとのリンクが消失 The object can't be edited because the link to the the base sketch is lost. - + ベーススケッチとのリンクが失われているためオブジェクトを編集することができません。 @@ -1506,7 +1486,7 @@ Create the sketch on a face. Please select a plane or an edge plus a pull direction - 面、またはエッジと引き伸ばし方向を選択してください + 面、またはエッジと引き抜き方向を選択してください @@ -1537,12 +1517,12 @@ Create the sketch on a face. Edit groove - + グルーブを編集 Edit revolve - + 回転体を編集 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.qm index 6e880e36ee..c03b29d9a3 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts index 70d4225ea9..f13ebc3c35 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts @@ -60,7 +60,7 @@ Make a fillet on an edge, face or body - Maak een filet op een rand, vlak of lichaam + Maak een afronding op een rand, vlak of lichaam @@ -96,7 +96,7 @@ create a linear pattern feature - create a linear pattern feature + Creëer een lineair patroon @@ -217,7 +217,7 @@ Scaled - Scaled + geschaald @@ -253,7 +253,7 @@ Number of teeth: - Number of teeth: + Aantal tanden: @@ -263,49 +263,29 @@ High precision: - + High precision: True - + True False - + False External gear: - - - - mm - mm + External gear: Pressure angle: - Pressure angle: - - - deg - deg - - - Number of Curves: - Number of Curves: - - - 2x3 - 2x3 - - - 1x4 - 1x4 + Drukhoek: @@ -421,7 +401,7 @@ Gelieve eerst één of meerdere randen te selecteren. Chamfer parameters - Afschuining parameters + Parameters voor afschuining @@ -701,7 +681,7 @@ Gelieve eerst één of meerdere randen te selecteren. Select reference... - Select reference... + Selecteer referentie... @@ -736,7 +716,7 @@ Gelieve eerst één of meerdere randen te selecteren. Undefined - Undefined + niet gedefinieerd @@ -783,7 +763,7 @@ Gelieve eerst één of meerdere randen te selecteren. Select reference... - Select reference... + Selecteer referentie... @@ -802,12 +782,12 @@ Gelieve eerst één of meerdere randen te selecteren. Select a face - Select a face + Selecteer een vlak Undefined - Undefined + niet gedefinieerd @@ -825,7 +805,7 @@ Gelieve eerst één of meerdere randen te selecteren. Transformations - Transformations + Transformaties @@ -845,7 +825,7 @@ Gelieve eerst één of meerdere randen te selecteren. Add mirrored transformation - Add mirrored transformation + Gespiegelde transformatie toevoegen @@ -860,7 +840,7 @@ Gelieve eerst één of meerdere randen te selecteren. Add scaled transformation - Add scaled transformation + Geschaalde transformatie toevoegen @@ -1164,7 +1144,7 @@ Gelieve eerst één of meerdere randen te selecteren. Select reference... - Select reference... + Selecteer referentie... @@ -1255,7 +1235,7 @@ Gelieve eerst één of meerdere randen te selecteren. Undefined - Undefined + niet gedefinieerd @@ -1344,7 +1324,7 @@ Gelieve eerst één of meerdere randen te selecteren. Please create a sketch or 2D object first. It must have a support face on a solid - Please create a sketch or 2D object first. It must have a support face on a solid + Maak eerst een schets of 2D-object. Het moet een steunvlak hebben op een voorwerp @@ -1372,18 +1352,18 @@ Gelieve eerst één of meerdere randen te selecteren. No fillet possible on selected faces/edges - No fillet possible on selected faces/edges + Geen afronding mogelijk op de geselecteerde vlakken/randen Chamfer works only on parts - Chamfer works only on parts + Afschuining werkt alleen op delen Shape of selected part is empty - Shape of selected part is empty + Vorm van geselecteerde deel is leeg @@ -1398,12 +1378,12 @@ Gelieve eerst één of meerdere randen te selecteren. Draft works only on parts - Draft works only on parts + Klad werkt alleen op onderdelen No draft possible on selected faces - No draft possible on selected faces + Geen klad mogelijk op geselecteerde vlakken @@ -1417,7 +1397,7 @@ Gelieve eerst één of meerdere randen te selecteren. Please create a subtractive or additive feature first - + Please create a subtractive or additive feature first @@ -1491,13 +1471,13 @@ Creëer de schets op een vlak. Lost link to base sketch - + Lost link to base sketch The object can't be edited because the link to the the base sketch is lost. - + The object can't be edited because the link to the the base sketch is lost. @@ -1538,12 +1518,12 @@ Creëer de schets op een vlak. Edit groove - + Edit groove Edit revolve - + Edit revolve diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.qm index e98256d748..23e599329e 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.ts index ff75288905..d7c9dc35e1 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_no.ts @@ -19,7 +19,7 @@ Chamfer - Chamfer + Skråskjær @@ -42,7 +42,7 @@ Make a draft on a face - Make a draft on a face + Tegn en skisse på en flate @@ -73,12 +73,12 @@ Groove - Groove + Spor Groove a selected sketch - Groove a selected sketch + Lag spor av valgte skisse @@ -91,12 +91,12 @@ LinearPattern - LinearPattern + LinærtMønster create a linear pattern feature - create a linear pattern feature + opprett et lineært mønster @@ -109,12 +109,12 @@ Mirrored - Mirrored + Speilet create a mirrored feature - create a mirrored feature + Legg til en speilet detalj @@ -132,7 +132,7 @@ create a multitransform feature - create a multitransform feature + opprett en multitransform detalj @@ -181,12 +181,12 @@ PolarPattern - PolarPattern + PolarMønster create a polar pattern feature - create a polar pattern feature + opprett et polar mønster @@ -199,12 +199,12 @@ Revolution - Revolution + Revolusjon Revolve a selected sketch - Revolve a selected sketch + Drei valgt skisse @@ -217,12 +217,12 @@ Scaled - Scaled + Skalert create a scaled feature - create a scaled feature + Lag skalert detalj @@ -230,17 +230,17 @@ Face tools - Face tools + Flateverktøy Sketch tools - Sketch tools + Skisseverktøy Create Geometry - Create Geometry + Opprett geometri @@ -248,64 +248,44 @@ Involute parameter - Involute parameter + Involute tannhjulsparametere Number of teeth: - Number of teeth: + Antall tenner: Modules: - Modules: + Moduler: High precision: - + Høy presisjon: True - + Sant False - + Usant External gear: - - - - mm - mm + Eksternt tannjhul: Pressure angle: - Pressure angle: - - - deg - deg - - - Number of Curves: - Number of Curves: - - - 2x3 - 2x3 - - - 1x4 - 1x4 + Trykkvinkel: @@ -356,7 +336,7 @@ Merk en eller flere kanter først. Choose feature - Choose feature + Velg detalj @@ -421,7 +401,7 @@ Merk en eller flere kanter først. Chamfer parameters - Chamfer parameters + Skråskjæringsinnstillinger @@ -429,7 +409,7 @@ Merk en eller flere kanter først. Edit chamfer - Edit chamfer + Redigere skråkant/fase @@ -437,7 +417,7 @@ Merk en eller flere kanter først. Input error - Input error + Inndatafeil @@ -445,7 +425,7 @@ Merk en eller flere kanter først. Edit fillet - Edit fillet + Rediger avrunding @@ -453,7 +433,7 @@ Merk en eller flere kanter først. Input error - Input error + Inndatafeil @@ -461,7 +441,7 @@ Merk en eller flere kanter først. Input error - Input error + Inndatafeil @@ -469,7 +449,7 @@ Merk en eller flere kanter først. Input error - Input error + Inndatafeil @@ -477,7 +457,7 @@ Merk en eller flere kanter først. Input error - Input error + Inndatafeil @@ -485,12 +465,12 @@ Merk en eller flere kanter først. Edit pocket - Edit pocket + Rediger lomme/pocket Input error - Input error + Inndatafeil @@ -498,7 +478,7 @@ Merk en eller flere kanter først. Input error - Input error + Inndatafeil @@ -506,7 +486,7 @@ Merk en eller flere kanter først. Input error - Input error + Inndatafeil @@ -514,7 +494,7 @@ Merk en eller flere kanter først. Input error - Input error + Inndatafeil @@ -527,37 +507,37 @@ Merk en eller flere kanter først. Add face - Add face + Legg til flate Remove face - Remove face + Fjern flate Draft angle - Draft angle + Skissevinkel Neutral plane - Neutral plane + Nøytralt plan Pull direction - Pull direction + Dra retning Reverse pull direction - Reverse pull direction + Omvendt dra retning Draft parameters - Draft parameters + Innstillinger for skisse @@ -580,7 +560,7 @@ Merk en eller flere kanter først. Fillet parameters - Fillet parameters + Avrundingsparametre @@ -598,12 +578,12 @@ Merk en eller flere kanter først. Vertical sketch axis - Vertical sketch axis + Loddrett skisse akse Horizontal sketch axis - Horizontal sketch axis + Vannrett skisse akse @@ -613,12 +593,12 @@ Merk en eller flere kanter først. Symmetric to plane - Symmetric to plane + Symmetrisk til planet Reversed - Reversed + Reversert @@ -628,7 +608,7 @@ Merk en eller flere kanter først. Groove parameters - Groove parameters + Sporparametre @@ -656,7 +636,7 @@ Merk en eller flere kanter først. Up to first - Up to first + Opp til første @@ -679,7 +659,7 @@ Merk en eller flere kanter først. Original feature - Original feature + Original detalj @@ -689,19 +669,19 @@ Merk en eller flere kanter først. Horizontal sketch axis - Horizontal sketch axis + Vannrett skisse akse Vertical sketch axis - Vertical sketch axis + Loddrett skisse akse Select reference... - Select reference... + Velg referanse... @@ -716,7 +696,7 @@ Merk en eller flere kanter først. Occurrences - Occurrences + Forekomster @@ -731,12 +711,12 @@ Merk en eller flere kanter først. Select an edge or a face - Select an edge or a face + Velg en kant eller en flate Undefined - Undefined + Udefinert @@ -749,7 +729,7 @@ Merk en eller flere kanter først. Original feature - Original feature + Original detalj XY @@ -771,19 +751,19 @@ Merk en eller flere kanter først. Horizontal sketch axis - Horizontal sketch axis + Vannrett skisse akse Vertical sketch axis - Vertical sketch axis + Loddrett skisse akse Select reference... - Select reference... + Velg referanse... @@ -802,12 +782,12 @@ Merk en eller flere kanter først. Select a face - Select a face + Velg en flate Undefined - Undefined + Udefinert @@ -820,12 +800,12 @@ Merk en eller flere kanter først. Original feature - Original feature + Original detalj Transformations - Transformations + Transformasjoner @@ -845,22 +825,22 @@ Merk en eller flere kanter først. Add mirrored transformation - Add mirrored transformation + Legg til speilet transformasjon Add linear pattern - Add linear pattern + Legg til lineært mønster Add polar pattern - Add polar pattern + Legg til polar mønster Add scaled transformation - Add scaled transformation + Legg til skalert transformasjon @@ -875,7 +855,7 @@ Merk en eller flere kanter først. Right-click to add - Right-click to add + Høyreklikk for å legge til @@ -898,7 +878,7 @@ Merk en eller flere kanter først. Symmetric to plane - Symmetric to plane + Symmetrisk til planet @@ -941,7 +921,7 @@ Merk en eller flere kanter først. Reversed - Reversed + Reversert Display mode: @@ -970,7 +950,7 @@ Merk en eller flere kanter først. Pad parameters - Pad parameters + Polstre-parametre @@ -988,7 +968,7 @@ Merk en eller flere kanter først. To first - To first + Til første @@ -1060,12 +1040,12 @@ Merk en eller flere kanter først. Symmetric to plane - Symmetric to plane + Symmetrisk til planet Reversed - Reversed + Reversert @@ -1089,7 +1069,7 @@ Merk en eller flere kanter først. Pocket parameters - Pocket parameters + Pocket parametere To last @@ -1099,7 +1079,7 @@ Merk en eller flere kanter først. To first - To first + Til første @@ -1131,7 +1111,7 @@ Merk en eller flere kanter først. Original feature - Original feature + Original detalj X @@ -1157,14 +1137,14 @@ Merk en eller flere kanter først. Normal sketch axis - Normal sketch axis + Normal skisse akse Select reference... - Select reference... + Velg referanse... @@ -1179,7 +1159,7 @@ Merk en eller flere kanter først. Occurrences - Occurrences + Forekomster @@ -1194,7 +1174,7 @@ Merk en eller flere kanter først. Select an edge - Select an edge + Velg en kant @@ -1212,22 +1192,22 @@ Merk en eller flere kanter først. Vertical sketch axis - Vertical sketch axis + Loddrett skisse akse Horizontal sketch axis - Horizontal sketch axis + Vannrett skisse akse Symmetric to plane - Symmetric to plane + Symmetrisk til planet Reversed - Reversed + Reversert @@ -1250,12 +1230,12 @@ Merk en eller flere kanter først. Revolution parameters - Revolution parameters + Omdreinings parametere Undefined - Undefined + Udefinert @@ -1268,17 +1248,17 @@ Merk en eller flere kanter først. Original feature - Original feature + Original detalj Factor - Factor + Faktor Occurrences - Occurrences + Forekomster @@ -1296,7 +1276,7 @@ Merk en eller flere kanter først. Transformed feature messages - Transformed feature messages + Transformert detalj meldinger @@ -1332,19 +1312,19 @@ Merk en eller flere kanter først. No valid sketches in this document - No valid sketches in this document + Ingen gyldig skisser i dette dokumentet Please create a sketch or 2D object first - Please create a sketch or 2D object first + Opprett en skisse eller 2D objektet først Please create a sketch or 2D object first. It must have a support face on a solid - Please create a sketch or 2D object first. It must have a support face on a solid + Opprett en skisse eller 2D objektet først. Det må ha støtte i en solid's flate @@ -1367,17 +1347,17 @@ Merk en eller flere kanter først. Shape of selected Part is empty - Formen på den valgte delen er tom + Formen på valgte Del er tom No fillet possible on selected faces/edges - No fillet possible on selected faces/edges + Avrunding av valgte flater/kanter er ikke mulig Chamfer works only on parts - Chamfer works only on parts + Skråkant/fase fungerer bare på deler @@ -1388,22 +1368,22 @@ Merk en eller flere kanter først. No chamfer possible on selected faces/edges - No chamfer possible on selected faces/edges + Skråkant/fase er ikke mulig på valgte flater/kanter Select one or more faces. - Select one or more faces. + Velg én eller flere ansikter. Draft works only on parts - Draft works only on parts + Skissering virker kun på deler No draft possible on selected faces - No draft possible on selected faces + Skissering er ikke mulig på valgte flater @@ -1412,12 +1392,12 @@ Merk en eller flere kanter først. No valid features in this document - No valid features in this document + Ingen gyldige detaljer i dette dokumentet Please create a subtractive or additive feature first - + Lag først et tilleg eller fratreks detalj @@ -1425,7 +1405,7 @@ Merk en eller flere kanter først. Please create a subtractive or additive feature first, please - Please create a subtractive or additive feature first, please + Lag først et tilleg eller fratreks detalj No Support @@ -1441,17 +1421,17 @@ Opprett skisse på en flate. Edit pad - Edit pad + Rediger pad Edit pocket - Edit pocket + Rediger lomme/pocket Edit chamfer - Edit chamfer + Redigere skråkant/fase @@ -1480,70 +1460,70 @@ Opprett skisse på en flate. Edit revolution - Edit revolution + Rediger revolusjon/omdreining Edit Groove - Edit Groove + Rediger groove/spor Lost link to base sketch - + Mistet koblingen til støtte skisse The object can't be edited because the link to the the base sketch is lost. - + Objektet kan ikke redigeres fordi koblingen til støtte skissen er tapt. Missing neutral plane - Missing neutral plane + Mangler nøytral flate Please select a plane or an edge plus a pull direction - Please select a plane or an edge plus a pull direction + Velg plan eller kant pluss en dra-retning Edit draft - Edit draft + Rediger skisse Edit fillet - Edit fillet + Rediger avrunding One transformed shape does not intersect support - One transformed shape does not intersect support + En omvandlet form krysser ikke støtte %1 transformed shapes do not intersect support - %1 transformed shapes do not intersect support + %1 omvandlede former krysser ikke støtte Transformation succeeded - Transformation succeeded + Omvandling lykkes Edit groove - + Rediger groove/spor Edit revolve - + Rediger revolusjon/omdreining @@ -1556,7 +1536,7 @@ Opprett skisse på en flate. No message - No message + Ingen beskjed diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.qm index bb716380f5..ba52916837 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts index 326b6c2804..b4f0eac005 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts @@ -73,12 +73,12 @@ Groove - Spoina + Rowek Groove a selected sketch - Spoinuj wybrany szkic + Wytnij rowek wybranym szkicem @@ -248,64 +248,44 @@ Involute parameter - Involute parameter + Parametry ewolwenty Number of teeth: - Number of teeth: + Liczba zębów: Modules: - Modules: + Moduły: High precision: - + High precision: True - + True False - + False External gear: - - - - mm - mm + External gear: Pressure angle: - Pressure angle: - - - deg - deg - - - Number of Curves: - Number of Curves: - - - 2x3 - 2x3 - - - 1x4 - 1x4 + Kąt przyporu: @@ -699,7 +679,7 @@ Please check one or more edge entities first. Select reference... - Select reference... + Wybierz odniesienie... @@ -734,7 +714,7 @@ Please check one or more edge entities first. Undefined - Undefined + Niezdefiniowany @@ -781,7 +761,7 @@ Please check one or more edge entities first. Select reference... - Select reference... + Wybierz odniesienie... @@ -800,12 +780,12 @@ Please check one or more edge entities first. Select a face - Select a face + Wybierz ścianę Undefined - Undefined + Niezdefiniowany @@ -992,7 +972,7 @@ Please check one or more edge entities first. Up to face - Do fasetki + Do płaszczyzny @@ -1109,7 +1089,7 @@ Please check one or more edge entities first. Up to face - Do fasetki + Do płaszczyzny @@ -1155,14 +1135,14 @@ Please check one or more edge entities first. Normal sketch axis - Normal sketch axis + Oś normalna do szkicu Select reference... - Select reference... + Wybierz odniesienie... @@ -1253,7 +1233,7 @@ Please check one or more edge entities first. Undefined - Undefined + Niezdefiniowany @@ -1415,7 +1395,7 @@ Please check one or more edge entities first. Please create a subtractive or additive feature first - + Please create a subtractive or additive feature first @@ -1488,13 +1468,13 @@ Create the sketch on a face. Lost link to base sketch - + Lost link to base sketch The object can't be edited because the link to the the base sketch is lost. - + The object can't be edited because the link to the the base sketch is lost. @@ -1535,12 +1515,12 @@ Create the sketch on a face. Edit groove - + Edit groove Edit revolve - + Edit revolve diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.qm index a3dd14a650..dc41b8387c 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts index b4746734c2..387eb3459b 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts @@ -263,50 +263,30 @@ High precision: - + Alta precisão: True - + Verdadeiro False - + Falso External gear: - - - - mm - mm + Engrenagem externo: Pressure angle: Ângulo de pressão: - - deg - grado - - - Number of Curves: - Número de curvas: - - - 2x3 - 2x3 - - - 1x4 - 1x4 - PartDesignGui::ChamferWidget @@ -1416,7 +1396,7 @@ Selecione primeiro uma ou mais arestas. Please create a subtractive or additive feature first - + Por favor crie primeiro um recurso aditivo ou subtrativo @@ -1489,13 +1469,13 @@ Create the sketch on a face. Lost link to base sketch - + A ligação ao desenho base foi perdida The object can't be edited because the link to the the base sketch is lost. - + O objeto não pode ser editado porque sua ligação com seu esboço de base foi perdida. @@ -1536,12 +1516,12 @@ Create the sketch on a face. Edit groove - + Editar sulco Edit revolve - + Editar revolução diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.qm index 4205cb8303..ead11d1e32 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.ts index cb6fc94a94..100d9ee285 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.ts @@ -42,7 +42,7 @@ Make a draft on a face - Make a draft on a face + Fazer rascunho sobre uma face @@ -96,7 +96,7 @@ create a linear pattern feature - create a linear pattern feature + Criar um padrão linear @@ -109,7 +109,7 @@ Mirrored - Mirrored + Espelhado @@ -163,7 +163,7 @@ Pocket - Pocket + Bolso @@ -253,59 +253,39 @@ Number of teeth: - Number of teeth: + Número de dentes: Modules: - Modules: + Módulos: High precision: - + High precision: True - + True False - + False External gear: - - - - mm - mm + External gear: Pressure angle: - Pressure angle: - - - deg - deg - - - Number of Curves: - Number of Curves: - - - 2x3 - 2x3 - - - 1x4 - 1x4 + Ângulo de pressão: @@ -428,7 +408,7 @@ Please check one or more edge entities first. Edit chamfer - Edit chamfer + Editar chanfro @@ -444,7 +424,7 @@ Please check one or more edge entities first. Edit fillet - Edit fillet + Editar filete @@ -526,17 +506,17 @@ Please check one or more edge entities first. Add face - Add face + Adicionar face Remove face - Remove face + Remover face Draft angle - Draft angle + Ângulo de projeto @@ -546,7 +526,7 @@ Please check one or more edge entities first. Pull direction - Pull direction + Direção da tração @@ -730,12 +710,12 @@ Please check one or more edge entities first. Select an edge or a face - Select an edge or a face + Selecione aresta ou face Undefined - Undefined + Indefinido @@ -801,12 +781,12 @@ Please check one or more edge entities first. Select a face - Select a face + Se Undefined - Undefined + Indefinido @@ -844,7 +824,7 @@ Please check one or more edge entities first. Add mirrored transformation - Add mirrored transformation + Selecione uma face @@ -874,7 +854,7 @@ Please check one or more edge entities first. Right-click to add - Right-click to add + Clique direito para adicionar @@ -1254,7 +1234,7 @@ Please check one or more edge entities first. Undefined - Undefined + Indefinido @@ -1392,7 +1372,7 @@ Please check one or more edge entities first. Select one or more faces. - Select one or more faces. + Selecione uma ou mais faces. @@ -1416,7 +1396,7 @@ Please check one or more edge entities first. Please create a subtractive or additive feature first - + Please create a subtractive or additive feature first @@ -1449,7 +1429,7 @@ Create the sketch on a face. Edit chamfer - Edit chamfer + Editar chanfro @@ -1483,40 +1463,40 @@ Create the sketch on a face. Edit Groove - Edit Groove + Editar Sulco Lost link to base sketch - + Lost link to base sketch The object can't be edited because the link to the the base sketch is lost. - + The object can't be edited because the link to the the base sketch is lost. Missing neutral plane - Missing neutral plane + Plano neutro ausente Please select a plane or an edge plus a pull direction - Please select a plane or an edge plus a pull direction + Por favor selecione um plano ou uma aresta mais uma direção de tração Edit draft - Edit draft + Editar rascunho Edit fillet - Edit fillet + Editar filete @@ -1531,17 +1511,17 @@ Create the sketch on a face. Transformation succeeded - Transformation succeeded + Transformação bem sucedida Edit groove - + Edit groove Edit revolve - + Edit revolve @@ -1554,7 +1534,7 @@ Create the sketch on a face. No message - No message + Nenhuma mensagem diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.qm index b03fef7fed..104c3ed41f 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts index 15a703a553..b82ca52465 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts @@ -263,50 +263,30 @@ High precision: - + High precision: True - + True False - + False External gear: - - - - mm - mm + External gear: Pressure angle: Pressure angle: - - deg - deg - - - Number of Curves: - Number of Curves: - - - 2x3 - 2x3 - - - 1x4 - 1x4 - PartDesignGui::ChamferWidget @@ -1417,7 +1397,7 @@ Please check one or more edge entities first. Please create a subtractive or additive feature first - + Please create a subtractive or additive feature first @@ -1462,7 +1442,7 @@ Create the sketch on a face. A dialog is already open in the task panel - O fereastra de dialog este deja deschisa in fereastra de sarcini + O fereastră de dialog este deja deschisă în fereastra de sarcini @@ -1474,7 +1454,7 @@ Create the sketch on a face. Do you want to close this dialog? - Doriti sa inchideti aceasta fereastra de dialog? + Doriţi să închideţi această fereastră de dialog? @@ -1490,13 +1470,13 @@ Create the sketch on a face. Lost link to base sketch - + Lost link to base sketch The object can't be edited because the link to the the base sketch is lost. - + The object can't be edited because the link to the the base sketch is lost. @@ -1537,12 +1517,12 @@ Create the sketch on a face. Edit groove - + Edit groove Edit revolve - + Edit revolve diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm index e1fb138bcc..ae5b703d05 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts index ee8c75a4b2..ca0f0c5ccc 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts @@ -24,7 +24,7 @@ Chamfer the selected edges of a shape - Притупить фаской выбранные края фигуры + Притупить фаской выбранные грани фигуры @@ -37,12 +37,12 @@ Draft - Высота осадки + Притяжка Make a draft on a face - Сделать набросок на поверхности + Сделать притяжку грани @@ -60,7 +60,7 @@ Make a fillet on an edge, face or body - Сделать скругление кромки, поверхности или тела + Скруглить грани поверхности или тела @@ -91,12 +91,12 @@ LinearPattern - ЛинейныйМассив + Линейный массив create a linear pattern feature - Создать линейный шаблон детали + Создать линейный массив из детали @@ -127,12 +127,12 @@ MultiTransform - MultiTransform + Множественное преобразование create a multitransform feature - Создать multitransform деталь + Создать множественное преобразование @@ -145,12 +145,12 @@ Pad - Заполнитель + Вырост Pad a selected sketch - Заполнитель выбранного эскиза + Выдавить выбранный эскиз @@ -168,7 +168,7 @@ create a pocket with the selected sketch - создать карман с выбранным эскизом + Создать карман в выбранном эскизе @@ -181,12 +181,12 @@ PolarPattern - КруговойМассив + Круговой массив create a polar pattern feature - Создать полярный шаблон детали + Создать круговой массив из детали @@ -248,64 +248,44 @@ Involute parameter - Involute parameter + Инволютивный параметр Number of teeth: - Number of teeth: + Количество зубов: Modules: - Modules: + Модуль: High precision: - + Высокая точность: True - + Да False - + Нет External gear: - - - - mm - мм + внешнее зацепление: Pressure angle: - Pressure angle: - - - deg - deg - - - Number of Curves: - Number of Curves: - - - 2x3 - 2x3 - - - 1x4 - 1x4 + Угол зацепления: @@ -337,8 +317,8 @@ No valid shape is selected. Please select a valid shape in the drop-down box first. - Допустимая форма не выбрана. -Пожалуйста сначала выберите допустимую форму в выпадающем списке. + Допустимая фигура не выбрана. +Сначала выберите допустимую фигуру в раскрывающемся списке. No edge selected @@ -347,7 +327,7 @@ Please select a valid shape in the drop-down box first. No edge entity is checked to chamfer. Please check one or more edge entities first. - Нельзя сгладить край обьекта. Пожалуйста, выберите края обьекта, один или более. + Выберите хотя бы одно ребро объекта для сглаживания. @@ -531,7 +511,7 @@ Please check one or more edge entities first. Remove face - Удалить грань + Убрать грань @@ -556,7 +536,7 @@ Please check one or more edge entities first. Draft parameters - Параметры проекта + Параметры притяжки @@ -592,7 +572,7 @@ Please check one or more edge entities first. Axis: - Оси: + Ось: @@ -700,7 +680,7 @@ Please check one or more edge entities first. Select reference... - Select reference... + Выбрать ориентир... @@ -735,7 +715,7 @@ Please check one or more edge entities first. Undefined - Undefined + Не определено @@ -782,7 +762,7 @@ Please check one or more edge entities first. Select reference... - Select reference... + Выбрать ориентир... @@ -801,12 +781,12 @@ Please check one or more edge entities first. Select a face - Select a face + Выделите грать Undefined - Undefined + Не определено @@ -844,7 +824,7 @@ Please check one or more edge entities first. Add mirrored transformation - Добавить зеркальное преобразование + Добавить зеркальное отражение @@ -1156,14 +1136,14 @@ Please check one or more edge entities first. Normal sketch axis - Normal sketch axis + Нормаль оси Эскиза Select reference... - Select reference... + Выбрать ориентир... @@ -1206,7 +1186,7 @@ Please check one or more edge entities first. Axis: - Оси: + Ось: @@ -1254,7 +1234,7 @@ Please check one or more edge entities first. Undefined - Undefined + Не определено @@ -1343,7 +1323,7 @@ Please check one or more edge entities first. Please create a sketch or 2D object first. It must have a support face on a solid - Пожалуйста, сначала создайте эскиз или 2D контур. Он должен быть на одной из поверхностей детали + Сначала создайте эскиз или 2D-объект. Он должен быть на одной из поверхностей детали @@ -1397,12 +1377,12 @@ Please check one or more edge entities first. Draft works only on parts - Проект строится только по частям + Притяжка работает только с частями No draft possible on selected faces - Отсутствуют контура на выбранной поверхности + Сделать притяжку выбранных граней невозможно @@ -1416,7 +1396,7 @@ Please check one or more edge entities first. Please create a subtractive or additive feature first - + Сначала используйте функцию вычитания или сложения @@ -1424,7 +1404,7 @@ Please check one or more edge entities first. Please create a subtractive or additive feature first, please - Пожалуйста, создайте первыми детали удаляемые или добавочные, пожалуйста + Сначала используйте функцию вычитания или сложения No Support @@ -1490,13 +1470,13 @@ Create the sketch on a face. Lost link to base sketch - + Lost link to base sketch The object can't be edited because the link to the the base sketch is lost. - + The object can't be edited because the link to the the base sketch is lost. @@ -1506,13 +1486,13 @@ Create the sketch on a face. Please select a plane or an edge plus a pull direction - Пожалуйста, выберите плоскость или ребро плюс направление вытягивания + Выберите плоскость или ребро, а также направление вытягивания Edit draft - Редактировать черновик + Изменить притяжку @@ -1537,12 +1517,12 @@ Create the sketch on a face. Edit groove - + Edit groove Edit revolve - + Изменить вращение diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.qm new file mode 100644 index 0000000000..b4e4544f5a Binary files /dev/null and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts new file mode 100644 index 0000000000..4106d35060 --- /dev/null +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts @@ -0,0 +1,1549 @@ + + + + + CmdPartDesignChamfer + + Part + Компонента + + + Chamfer... + Chamfer... + + + + PartDesign + Дизајн Делова + + + + Chamfer + Обори + + + + Chamfer the selected edges of a shape + Обори одабране ивице облика + + + + CmdPartDesignDraft + + + PartDesign + Дизајн Делова + + + + Draft + Цртеж + + + + Make a draft on a face + Направи нацрт на површи + + + + CmdPartDesignFillet + + + PartDesign + Дизајн Делова + + + + Fillet + Заобли + + + + Make a fillet on an edge, face or body + Заобли ивицу,површ,или тело + + + + CmdPartDesignGroove + + + PartDesign + Дизајн Делова + + + + Groove + Жлеб + + + + Groove a selected sketch + Направи жлеб cа одабраном cкицом + + + + CmdPartDesignLinearPattern + + + PartDesign + Дизајн Делова + + + + LinearPattern + Линеарни Шаблон + + + + create a linear pattern feature + направи оcобину линеарни шаблон + + + + CmdPartDesignMirrored + + + PartDesign + Дизајн Делова + + + + Mirrored + Cиметрија + + + + create a mirrored feature + направи cвојcтво у огледалу + + + + CmdPartDesignMultiTransform + + + PartDesign + Дизајн Делова + + + + MultiTransform + Вишеструка трансформација + + + + create a multitransform feature + Направи cвојcтво вишеcтруке транcформације + + + + CmdPartDesignPad + + + PartDesign + Дизајн Делова + + + + Pad + Извуци + + + + Pad a selected sketch + Извуци изабрану скицу + + + + CmdPartDesignPocket + + + PartDesign + Дизајн Делова + + + + Pocket + Удубљење + + + + create a pocket with the selected sketch + Направи удубљење од изабране скице + + + + CmdPartDesignPolarPattern + + + PartDesign + Дизајн Делова + + + + PolarPattern + Поларни Шаблон + + + + create a polar pattern feature + направи cвојcтво поларни шаблин + + + + CmdPartDesignRevolution + + + PartDesign + Дизајн Делова + + + + Revolution + Револуција + + + + Revolve a selected sketch + Направи тело револуцијом cкице + + + + CmdPartDesignScaled + + + PartDesign + Дизајн Делова + + + + Scaled + Scaled + + + + create a scaled feature + create a scaled feature + + + + Gui::TaskView::TaskWatcherCommands + + + Face tools + Алати површи + + + + Sketch tools + Алати cкице + + + + Create Geometry + Направи геометрију + + + + InvoluteGearParameter + + + Involute parameter + Involute parameter + + + + Number of teeth: + Број зубаца: + + + + Modules: + Модули: + + + + High precision: + Виcока прецизноcт: + + + + + True + Прави + + + + + False + Лажни + + + + External gear: + Cпољни зупчаник: + + + + Pressure angle: + Угао притиcка: + + + + PartDesignGui::ChamferWidget + + Edges to chamfer + Edges to chamfer + + + Start distance + Start distance + + + End distance + End distance + + + Edge%1 + Ивица%1 + + + Distance + Distance + + + No shape selected + Нема одабраних облика + + + No valid shape is selected. +Please select a valid shape in the drop-down box first. + Ниједан важећи облик није изабран.Молим,прво изаберите важећи облик у падајућем оквиру. + + + No edge selected + Нема одабраних ивица + + + No edge entity is checked to chamfer. +Please check one or more edge entities first. + No edge entity is checked to chamfer. +Please check one or more edge entities first. + + + + PartDesignGui::FeaturePickDialog + + + Choose feature + Одабери cвојcтво + + + + PartDesignGui::TaskChamfer + + Chamfer Edges + Chamfer Edges + + + Shape + Облик + + + Selected shape: + Одабери облик: + + + No selection + Нема одабира + + + Chamfer Parameter + Chamfer Parameter + + + All + All + + + None + Ниједан + + + Chamfer type: + Chamfer type: + + + Constant Distance + Constant Distance + + + Variable Distance + Variable Distance + + + Distance: + Удаљеност: + + + + PartDesignGui::TaskChamferParameters + + + Form + Form + + + + Size: + Величина: + + + + Chamfer parameters + Chamfer parameters + + + + PartDesignGui::TaskDlgChamferParameters + + + Edit chamfer + Уреди обарање + + + + PartDesignGui::TaskDlgDraftParameters + + + Input error + Грешка приликом уноса + + + + PartDesignGui::TaskDlgFilletParameters + + + Edit fillet + Уреди заобљење + + + + PartDesignGui::TaskDlgLinearPatternParameters + + + Input error + Грешка приликом уноса + + + + PartDesignGui::TaskDlgMirroredParameters + + + Input error + Грешка приликом уноса + + + + PartDesignGui::TaskDlgMultiTransformParameters + + + Input error + Грешка приликом уноса + + + + PartDesignGui::TaskDlgPadParameters + + + Input error + Грешка приликом уноса + + + + PartDesignGui::TaskDlgPocketParameters + + + Edit pocket + Уреди удубљење + + + + Input error + Грешка приликом уноса + + + + PartDesignGui::TaskDlgPolarPatternParameters + + + Input error + Грешка приликом уноса + + + + PartDesignGui::TaskDlgScaledParameters + + + Input error + Грешка приликом уноса + + + + PartDesignGui::TaskDlgTransformedParameters + + + Input error + Грешка приликом уноса + + + + PartDesignGui::TaskDraftParameters + + + Form + Form + + + + Add face + Додај површ + + + + Remove face + Уклони површ + + + + Draft angle + Угао цртежа + + + + Neutral plane + Неутрална раван + + + + Pull direction + Cмер повлачења + + + + Reverse pull direction + Обрнути cмер повлачења + + + + Draft parameters + Параметри цртежа + + + + Remove + Obriši + + + + PartDesignGui::TaskFilletParameters + + + Form + Form + + + + Radius: + Полупречник: + + + + Fillet parameters + Параметри заобљења + + + + PartDesignGui::TaskGrooveParameters + + + Form + Form + + + + Axis: + Оса: + + + + Vertical sketch axis + Вертикална оcа cкице + + + + Horizontal sketch axis + Хоризонтална оcа cкице + + + + Angle: + Угао: + + + + Symmetric to plane + Симетрично наспрам равни + + + + Reversed + Обрнуто + + + + Update view + Ажурирај перcпективу + + + + Groove parameters + Параметри жлеба + + + + PartDesignGui::TaskHoleParameters + + + Form + Form + + + + Type: + Тип: + + + + Dimension + Димензија + + + + Up to last + До последњег + + + + Up to first + До првог + + + + Size: + Величина: + + + + TaskHoleParameters + TaskHoleParameters + + + + PartDesignGui::TaskLinearPatternParameters + + + Form + Form + + + + Original feature + Оригинално cвојcтво + + + + Direction + Правац + + + + Horizontal sketch axis + Хоризонтална оcа cкице + + + + Vertical sketch axis + Вертикална оcа cкице + + + + + + Select reference... + Одабери референцу... + + + + Reverse direction + Reverse direction + + + + Length + Дужина + + + + Occurrences + Occurrences + + + + OK + U redu + + + + Update view + Ажурирај перcпективу + + + + Select an edge or a face + Изабери ивицу,или површ + + + + Undefined + Недефинисано + + + + PartDesignGui::TaskMirroredParameters + + + Form + Form + + + + Original feature + Оригинално cвојcтво + + + XY + 'XY' + + + XZ + 'XZ' + + + YZ + 'YZ' + + + + Plane + Раван + + + + Horizontal sketch axis + Хоризонтална оcа cкице + + + + Vertical sketch axis + Вертикална оcа cкице + + + + + + Select reference... + Одабери референцу... + + + + OK + U redu + + + + Update view + Ажурирај перcпективу + + + Select a plane + Select a plane + + + + Select a face + Изабери површ + + + + Undefined + Недефинисано + + + + PartDesignGui::TaskMultiTransformParameters + + + Form + Form + + + + Original feature + Оригинално cвојcтво + + + + Transformations + Трансформације + + + + Update view + Ажурирај перcпективу + + + + Edit + Измени + + + + Delete + Обриши + + + + Add mirrored transformation + Add mirrored transformation + + + + Add linear pattern + Додај линеарни шаблон + + + + Add polar pattern + Додај поларни шаблон + + + + Add scaled transformation + Add scaled transformation + + + + Move up + Помери горе + + + + Move down + Премести доле + + + + Right-click to add + Десни клик за додавање + + + + PartDesignGui::TaskPadParameters + + + Form + Form + + + + Type + Тип + + + + Length + Дужина + + + + Symmetric to plane + Симетрично наспрам равни + + + + 2nd length + Друга дужина + + + + + + + + Face + Површ + + + + Update view + Ажурирај перcпективу + + + Type: + Тип: + + + + + + Dimension + Димензија + + + Length: + Дужина: + + + Mirrored extent + Mirrored extent + + + + Reversed + Обрнуто + + + Display mode: + Način prikaza: + + + Plot mode: + Plot mode: + + + Point size: + Veličina točke: + + + Line width: + Širina linije: + + + Transparency: + Prozirnost: + + + TaskPadParameters + TaskPadParameters + + + + Pad parameters + Параметри извлачења + + + + + No face selected + Површ није изабрана + + + + + To last + To last + + + + + To first + До прве + + + + + Up to face + До површи + + + + + Two dimensions + Две димензије + + + + PartDesignGui::TaskPatternRectangularParameters + + Form + Form + + + Spacing1: + Spacing1: + + + Number1: + Number1: + + + Second extend + Second extend + + + Spacing2: + Spacing2: + + + Number2: + Number2: + + + TaskPatternRectangularParameters + TaskPatternRectangularParameters + + + + PartDesignGui::TaskPocketParameters + + + Form + Form + + + Type: + Тип: + + + + Type + Тип + + + + + + Dimension + Димензија + + + + Symmetric to plane + Симетрично наспрам равни + + + + Reversed + Обрнуто + + + + + + + + Face + Површ + + + + Update view + Ажурирај перcпективу + + + + Length + Дужина + + + + Pocket parameters + Параметри удубљења + + + To last + To last + + + + + To first + До прве + + + + + Through all + Кроз све + + + + + Up to face + До површи + + + + + + No face selected + Површ није изабрана + + + + PartDesignGui::TaskPolarPatternParameters + + + Form + Form + + + + Original feature + Оригинално cвојcтво + + + X + 'X' + + + Y + 'Y' + + + Z + 'Z' + + + Direction + Правац + + + + Axis + Оса + + + + Normal sketch axis + Нормалне оcе cкице + + + + + + Select reference... + Одабери референцу... + + + + Reverse direction + Reverse direction + + + + Angle + Угао + + + + Occurrences + Occurrences + + + + OK + U redu + + + + Update view + Ажурирај перcпективу + + + + Select an edge + Изабери ивицу + + + + PartDesignGui::TaskRevolutionParameters + + + Form + Form + + + + Axis: + Оса: + + + + Vertical sketch axis + Вертикална оcа cкице + + + + Horizontal sketch axis + Хоризонтална оcа cкице + + + + Symmetric to plane + Симетрично наспрам равни + + + + Reversed + Обрнуто + + + + Update view + Ажурирај перcпективу + + + Vertical + Vertical + + + Horizontal + Horizontal + + + + Angle: + Угао: + + + + Revolution parameters + Параметри револуције + + + + Undefined + Недефинисано + + + + PartDesignGui::TaskScaledParameters + + + Form + Form + + + + Original feature + Оригинално cвојcтво + + + + Factor + Фактор + + + + Occurrences + Occurrences + + + + OK + U redu + + + + Update view + Ажурирај перcпективу + + + + PartDesignGui::TaskTransformedMessages + + + Transformed feature messages + Transformed feature messages + + + + QObject + + + + + + + + + + + Wrong selection + Погрешан избор + + + Select a sketch or 2D object. + Select a sketch or 2D object. + + + The shape of the selected object is empty. + The shape of the selected object is empty. + + + The shape of the selected object is not a wire. + The shape of the selected object is not a wire. + + + + + + + No valid sketches in this document + Нема валидних скица у овом документу + + + + + Please create a sketch or 2D object first + Молим,прво направите скицу,или 2Д објекат + + + + + Please create a sketch or 2D object first. It must have a support face on a solid + Молим креирајте прво cкицу,или 2D објекат.Мора имати површ као оcнову на чврcтом телу + + + + + Select an edge, face or body. Only one body is allowed. + Изабери ивицу,површ,или тело.Дозвољено је само једно тело. + + + + + + Wrong object type + Погрешан тип објекта + + + + Fillet works only on parts + Заобљење функционише само на деловима + + + + Shape of selected Part is empty + Облик изабраног Дела је празан + + + + No fillet possible on selected faces/edges + Заобљење није могуће на изабраним површинама/ивицама + + + + Chamfer works only on parts + Обарање ради cамо на телима + + + + + Shape of selected part is empty + Облик изабраног дела је празан + + + + No chamfer possible on selected faces/edges + Није могуће обарање на одабраним површима/рубовима + + + + Select one or more faces. + Изабери једну,или више површи. + + + + Draft works only on parts + Цртеж ради cамо на телима + + + + No draft possible on selected faces + Цртеж није могућ на одабраним површима + + + + + + + + No valid features in this document + Нема важећих функција у овом документу + + + + Please create a subtractive or additive feature first + Please create a subtractive or additive feature first + + + + + + + Please create a subtractive or additive feature first, please + Please create a subtractive or additive feature first, please + + + No Support + No Support + + + The sketch has to have a support for the pocket feature. +Create the sketch on a face. + The sketch has to have a support for the pocket feature. +Create the sketch on a face. + + + + + Edit pad + Уреди извучени облик + + + + Edit pocket + Уреди удубљење + + + + Edit chamfer + Уреди обарање + + + + + + + + + + + A dialog is already open in the task panel + A dialog is already open in the task panel + + + + + + + + + + + Do you want to close this dialog? + Do you want to close this dialog? + + + + Edit revolution + Уреди револуцију + + + + Edit Groove + Уреди Жлеб + + + + + Lost link to base sketch + Изгубљена веза са основном скицом + + + + + The object can't be edited because the link to the the base sketch is lost. + Није могуће изменити објекат, јер је веза cа оcновном cкицом изгубљена. + + + + Missing neutral plane + Missing neutral plane + + + + Please select a plane or an edge plus a pull direction + Молим, одаберите површину или руб,плуc cмер вучења + + + + + Edit draft + Уреди цртеж + + + + Edit fillet + Уреди заобљење + + + + One transformed shape does not intersect support + One transformed shape does not intersect support + + + + %1 transformed shapes do not intersect support + %1 transformed shapes do not intersect support + + + + Transformation succeeded + Успешна Трансформација + + + + Edit groove + Уреди жлеб + + + + Edit revolve + Edit revolve + + + + TaskTransformedMessages + + + Form + Form + + + + No message + Нема поруке + + + + Workbench + + + Part Design + Дизајн Делова + + + diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.qm index 409bf3dd7d..879cc9a66a 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts index b727f647f5..85c7341e6d 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts @@ -253,7 +253,7 @@ Number of teeth: - Number of teeth: + Antal tänder: @@ -263,50 +263,30 @@ High precision: - + High precision: True - + True False - + False External gear: - - - - mm - mm + External gear: Pressure angle: Pressure angle: - - deg - deg - - - Number of Curves: - Number of Curves: - - - 2x3 - 2x3 - - - 1x4 - 1x4 - PartDesignGui::ChamferWidget @@ -701,7 +681,7 @@ Välj en eller fler kanter först. Select reference... - Select reference... + Välj referens... @@ -736,7 +716,7 @@ Välj en eller fler kanter först. Undefined - Undefined + Odefinierad @@ -783,7 +763,7 @@ Välj en eller fler kanter först. Select reference... - Select reference... + Välj referens... @@ -802,12 +782,12 @@ Välj en eller fler kanter först. Select a face - Select a face + Välj en yta Undefined - Undefined + Odefinierad @@ -1157,14 +1137,14 @@ Välj en eller fler kanter först. Normal sketch axis - Normal sketch axis + Normal skissaxel Select reference... - Select reference... + Välj referens... @@ -1255,7 +1235,7 @@ Välj en eller fler kanter först. Undefined - Undefined + Odefinierad @@ -1417,7 +1397,7 @@ Välj en eller fler kanter först. Please create a subtractive or additive feature first - + Please create a subtractive or additive feature first @@ -1490,13 +1470,13 @@ Create the sketch on a face. Lost link to base sketch - + Lost link to base sketch The object can't be edited because the link to the the base sketch is lost. - + The object can't be edited because the link to the the base sketch is lost. @@ -1527,22 +1507,22 @@ Create the sketch on a face. %1 transformed shapes do not intersect support - %1 transformed shapes do not intersect support + %1 transformerade former stöds inte för snitt Transformation succeeded - Transformation succeeded + Transformeringen lyckades Edit groove - + Edit groove Edit revolve - + Edit revolve @@ -1555,7 +1535,7 @@ Create the sketch on a face. No message - No message + Inget meddelande diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.qm index 0aec025263..d1234042b3 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts index 25a7effe45..c50857e9b8 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts @@ -24,7 +24,7 @@ Chamfer the selected edges of a shape - Створити фаску на обраному краю фігури + Створити фаску на обраному ребрі фігури @@ -37,7 +37,7 @@ Draft - Draft + Креслення @@ -60,7 +60,7 @@ Make a fillet on an edge, face or body - Зробити округлення краю, грані або тіла + Зробити округлення ребра, грані або тіла @@ -258,55 +258,35 @@ Modules: - Modules: + Модулі: High precision: - + High precision: True - + True False - + False External gear: - - - - mm - мм + External gear: Pressure angle: Pressure angle: - - deg - deg - - - Number of Curves: - Number of Curves: - - - 2x3 - 2x3 - - - 1x4 - 1x4 - PartDesignGui::ChamferWidget @@ -445,7 +425,7 @@ Please check one or more edge entities first. Edit fillet - Edit fillet + Редагувати скруглення @@ -731,12 +711,12 @@ Please check one or more edge entities first. Select an edge or a face - Обрати край або поверхню + Обрати ребро або поверхню Undefined - Undefined + Невизначено @@ -802,12 +782,12 @@ Please check one or more edge entities first. Select a face - Select a face + Обрати поверхню Undefined - Undefined + Невизначено @@ -1255,7 +1235,7 @@ Please check one or more edge entities first. Undefined - Undefined + Невизначено @@ -1344,13 +1324,13 @@ Please check one or more edge entities first. Please create a sketch or 2D object first. It must have a support face on a solid - Please create a sketch or 2D object first. It must have a support face on a solid + Будь ласка, створіть ескізу або 2D об'єкт спочатку. Він повинен мати підтримуючу поверхню на суцільному тілі Select an edge, face or body. Only one body is allowed. - Обрати край, грань або тіло. Можливо обрати лише одне тіло. + Обрати грань, поверхню або тіло. Можливо обрати лише одне тіло. @@ -1417,7 +1397,7 @@ Please check one or more edge entities first. Please create a subtractive or additive feature first - + Please create a subtractive or additive feature first @@ -1490,13 +1470,13 @@ Create the sketch on a face. Lost link to base sketch - + Lost link to base sketch The object can't be edited because the link to the the base sketch is lost. - + The object can't be edited because the link to the the base sketch is lost. @@ -1517,7 +1497,7 @@ Create the sketch on a face. Edit fillet - Edit fillet + Редагувати скруглення @@ -1537,12 +1517,12 @@ Create the sketch on a face. Edit groove - + Edit groove Edit revolve - + Edit revolve diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.qm index 360880732d..cb65a40878 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts index 4524b437f4..c1148ae98f 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts @@ -263,50 +263,30 @@ High precision: - + High precision: True - + True False - + False External gear: - - - - mm - mm + External gear: Pressure angle: Pressure angle: - - deg - deg - - - Number of Curves: - Number of Curves: - - - 2x3 - 2x3 - - - 1x4 - 1x4 - PartDesignGui::ChamferWidget @@ -1415,7 +1395,7 @@ Please check one or more edge entities first. Please create a subtractive or additive feature first - + Please create a subtractive or additive feature first @@ -1489,13 +1469,13 @@ Create the sketch on a face. Lost link to base sketch - + Lost link to base sketch The object can't be edited because the link to the the base sketch is lost. - + The object can't be edited because the link to the the base sketch is lost. @@ -1536,12 +1516,12 @@ Create the sketch on a face. Edit groove - + Edit groove Edit revolve - + Edit revolve diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.qm index 80df8b3839..35a3faf740 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts index 13cae8cb73..290631eec7 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts @@ -263,50 +263,30 @@ High precision: - + 高精度: True - + 正確 False - + 錯誤 External gear: - - - - mm - mm + 外齒輪: Pressure angle: 壓力角: - - deg - 度 - - - Number of Curves: - 曲線數量: - - - 2x3 - 2x3 - - - 1x4 - 1x4 - PartDesignGui::ChamferWidget @@ -1417,7 +1397,7 @@ Please check one or more edge entities first. Please create a subtractive or additive feature first - + 請先建立一個刪減或添加的功能 @@ -1490,13 +1470,13 @@ Create the sketch on a face. Lost link to base sketch - + 無連結至基礎素描 The object can't be edited because the link to the the base sketch is lost. - + 因為無連結至基礎素描使此物件無法編輯 @@ -1537,12 +1517,12 @@ Create the sketch on a face. Edit groove - + 編輯挖槽 Edit revolve - + 編輯旋轉 diff --git a/src/Mod/Plot/resources/Plot.qrc b/src/Mod/Plot/resources/Plot.qrc index 8d5dc7f3fd..20b1da4bbe 100644 --- a/src/Mod/Plot/resources/Plot.qrc +++ b/src/Mod/Plot/resources/Plot.qrc @@ -31,5 +31,6 @@ translations/Plot_zh-CN.qm translations/Plot_zh-TW.qm translations/Plot_pt-PT.qm + translations/Plot_sr.qm diff --git a/src/Mod/Plot/resources/translations/Plot_de.qm b/src/Mod/Plot/resources/translations/Plot_de.qm index b57d250829..edd6354b03 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_de.qm and b/src/Mod/Plot/resources/translations/Plot_de.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_de.ts b/src/Mod/Plot/resources/translations/Plot_de.ts index 9ccf458728..5073665e54 100644 --- a/src/Mod/Plot/resources/translations/Plot_de.ts +++ b/src/Mod/Plot/resources/translations/Plot_de.ts @@ -1,216 +1,216 @@ - + Plot - + Plot edition tools - Plot edition tools + Druckausgabewerkzeuge - + Plot - Plot + Ausdruck Plot_Axes - + Configure axes - Configure axes + Achsen konfigurieren - - Configure axes parameters - Configure axes parameters + + Configure the axes parameters + Konfigurieren Sie die Achsenparameter Plot_Grid - + Show/Hide grid - Show/Hide grid + Raster ein-/ausblenden - + Show/Hide grid on selected plot - Show/Hide grid on selected plot + Raster auf selektiertem Ausdruck ein-/ausblenden Plot_Labels - + Set labels - Set labels + Beschriftung festlegen - + Set title and axes labels - Setze Titel- und Achsenbeschriftungen + Setze Titel- und Achsenbeschriftungen Plot_Legend - + Show/Hide legend - Legende ein-/ausblenden + Legende ein-/ausblenden - + Show/Hide legend on selected plot - Show/Hide legend on selected plot + Beschreibung von selektiertem Ausdruck ein-/ausblenden Plot_Positions - + Set positions and sizes - Set positions and sizes + Einstellen der Position und Größe - + Set labels and legend positions and sizes - Set labels and legend positions and sizes + Beschriftung, Lage und Größe der Legende festlegen Plot_SaveFig - + Save plot - Save plot + Ausdruck speichern - - Save plot as image file - Save plot as image file + + Save the plot as an image file + Ausdruck als Bilddatei speichern Plot_Series - + Configure series - Configure series + Folgen einrichten - + Configure series drawing style and label - Configure series drawing style and label + Einrichten des Zeichen-Stils und der Beschriftung von Folgen plot_axes - + Configure axes - Configure axes + Achsen konfigurieren - + Active axes - Aktive Achsen + Aktive Achsen - + Apply to all axes - Auf alle Achsen anwenden + Auf alle Achsen anwenden - + Dimensions - Dimensions + Abmessungen - + X axis position - X axis position + X-Achse positionieren - + Y axis position - Y axis position + Y-Achse positionieren - + Scales - Scales + Maßstäbe - + X auto - X auto + X automatisch - + Y auto - Y auto + Y automatisch - + Index of the active axes - Index of the active axes + Zähler der aktiven Achse - + Add new axes to the plot - Add new axes to the plot + Neue Achsen zum Ausdruck hinzufügen - + Remove selected axes - Remove selected axes + Ausgewählte Achsen entfernen - + Check it to apply transformations to all axes - Check it to apply transformations to all axes + Prüfen zum Anwenden auf alle Achsen - + Left bound of axes - Left bound of axes + Achsbegrenzung links - + Right bound of axes - Right bound of axes + Achsbegrenzung rechts - + Bottom bound of axes - Bottom bound of axes + Achsbegrenzung unten - + Top bound of axes - Top bound of axes + Achsbegrenzung oben - + Outward offset of X axis - Outward offset of X axis + Äußerer Versatz der X-Achse - + Outward offset of Y axis - Outward offset of Y axis + Äußerer Versatz der Y-Achse - + X axis scale autoselection - X axis scale autoselection + Automatische Auswahl der X-Achsen-Skalierung - + Y axis scale autoselection - Y axis scale autoselection + Automatische Auswahl der Y-Achsen-Skalierung @@ -218,244 +218,244 @@ matplotlib not found, so Plot module can not be loaded - matplotlib not found, so Plot module can not be loaded + matplotlib nicht gefunden, daher kann das Modul Plot nicht geladen werden - + matplotlib not found, Plot module will be disabled - matplotlib not found, Plot module will be disabled + matplotlib nicht gefunden, daher wird das Modul Plot ausgeschaltet - + Plot document must be selected in order to save it - Plot document must be selected in order to save it + Das Ausdruckdokument muss ausgewählt werden, damit es gespeichert werden kann - + Axes 0 can not be deleted - Axes 0 can not be deleted + Achse 0 kann nicht gelöscht werden - - Grid must be activated on top of a plot document - Grid must be activated on top of a plot document + + The grid must be activated on top of a plot document + Das Raster muss am Anfang des Plot-Dokuments aktiviert werden - - Legend must be activated on top of a plot document - Legend must be activated on top of a plot document + + The legend must be activated on top of a plot document + Die Legende muss am Anfang des Plot-Dokuments aktiviert werden plot_labels - + Set labels - Set labels + Beschriftung festlegen - + Active axes - Aktive Achsen + Aktive Achsen - + Title - Title + Name - + X label - X label + Beschriftung X - + Y label - Y label + Beschriftung Y - + Index of the active axes - Index of the active axes + Zähler der aktiven Achse - + Title (associated to active axes) - Title (associated to active axes) + Name (bezogen auf die aktive Achse) - + Title font size - Title font size + Schriftgröße für den Name - + X axis title - X axis title + Name der X-Achse - + X axis title font size - X axis title font size + Schriftgröße des X-Achsen-Namens - + Y axis title - Y axis title + Name der Y-Achse - + Y axis title font size - Y axis title font size + Schriftgröße des Y-Achsen-Namens plot_positions - + Set positions and sizes - Set positions and sizes + Einstellen der Position und Größe - + Position - Position + Position - + Size - Größe + Größe - + List of modificable items - List of modificable items + Liste änderbarer Bestandteile - + X item position - X item position + Lage des Bestandteils X - + Y item position - Y item position + Lage des Bestandteils Y - + Item size - Item size + Größe des Bestandteils plot_save - + Save figure - Save figure + Abbildung speichern - + Inches - Zoll + Zoll - + Dots per Inch - Punkte pro Zoll + Punkte pro Zoll - + Output image file path - Speicherpfad für Bilddatei + Speicherpfad für Bilddatei - + Show a file selection dialog - Datei-Auswahl-Dialog anzeigen + Datei-Auswahl-Dialog anzeigen - + X image size - X Bildgröße + X Bildgröße - + Y image size - Y Bildgröße + Y Bildgröße - + Dots per point, with size will define output image resolution - Dots per point, with size will define output image resolution + Punkte pro Punkt. In Verbindung mit der Bildabmessungen bestimmt das die Auflösung des Bildes plot_series - + No label - No label + Keine Beschriftung - + Remove serie - Remove serie + Datenreihe entfernen - + Line style - Line style + Stil-Eigenschaften der Linie - + Marker - Marker + Hevorhebung (Datenpunkte) - + Configure series - Configure series + Folgen einrichten - + List of available series - List of available series + Liste der verfügbaren Datenreihen - + Line title - Line title + Name der Linie - + Marker style - Marker style + Stil-Eigenschaften der Hervorhebung - + Line width - Linienbreite + Linienbreite - + Marker size - Marker size + Größe der Hervorhebung - + Line and marker color - Line and marker color + Farbe der Hervorhebung und der Linie - + Removes this serie - Removes this serie + Diese Datenreihe entfernen - + If checked serie will not be considered for legend - If checked serie will not be considered for legend + Nicht in Legende anzeigen diff --git a/src/Mod/Plot/resources/translations/Plot_fi.qm b/src/Mod/Plot/resources/translations/Plot_fi.qm index be30944c13..06f0e0c39b 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_fi.qm and b/src/Mod/Plot/resources/translations/Plot_fi.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_fi.ts b/src/Mod/Plot/resources/translations/Plot_fi.ts index 0a0c9404a0..83f38d69ae 100644 --- a/src/Mod/Plot/resources/translations/Plot_fi.ts +++ b/src/Mod/Plot/resources/translations/Plot_fi.ts @@ -6,12 +6,12 @@ Plot edition tools - Käyrän tulostuksen muokkaustyökalut + Pistekuvioiden muokkaustyökalut Plot - Käyrän tulostus + Pistekuvio -plot @@ -24,7 +24,7 @@ Configure the axes parameters - Configure the axes parameters + Määritä akselit-parametrit @@ -89,7 +89,7 @@ Save the plot as an image file - Save the plot as an image file + Tallenna pistekuvio kuvatiedostona @@ -238,12 +238,12 @@ The grid must be activated on top of a plot document - The grid must be activated on top of a plot document + Ruudukko täytyy aktivoida pistekuvioasiakirjan päällä The legend must be activated on top of a plot document - The legend must be activated on top of a plot document + Selitykset täytyy aktivoida pistekuvioasiakirjan päälle diff --git a/src/Mod/Plot/resources/translations/Plot_fr.qm b/src/Mod/Plot/resources/translations/Plot_fr.qm index 1b3ffd4e9e..e75f8a317d 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_fr.qm and b/src/Mod/Plot/resources/translations/Plot_fr.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_fr.ts b/src/Mod/Plot/resources/translations/Plot_fr.ts index cc446ec01b..2fe210ea75 100644 --- a/src/Mod/Plot/resources/translations/Plot_fr.ts +++ b/src/Mod/Plot/resources/translations/Plot_fr.ts @@ -160,7 +160,7 @@ Add new axes to the plot - Ajouter de nouveaux axes aux graphiques + Ajouter de nouveaux axes au graphique diff --git a/src/Mod/Plot/resources/translations/Plot_ja.qm b/src/Mod/Plot/resources/translations/Plot_ja.qm index 535235d438..07e3eb43ac 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_ja.qm and b/src/Mod/Plot/resources/translations/Plot_ja.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_ja.ts b/src/Mod/Plot/resources/translations/Plot_ja.ts index 529f8f7225..5213bf97ac 100644 --- a/src/Mod/Plot/resources/translations/Plot_ja.ts +++ b/src/Mod/Plot/resources/translations/Plot_ja.ts @@ -24,7 +24,8 @@ Configure the axes parameters - Configure the axes parameters + 軸パラメーターの +詳細設定 @@ -238,12 +239,12 @@ The grid must be activated on top of a plot document - The grid must be activated on top of a plot document + プロットドキュメント上でグリッドをアクティブにする必要があります The legend must be activated on top of a plot document - The legend must be activated on top of a plot document + プロットドキュメント上で凡例をアクティブにする必要があります diff --git a/src/Mod/Plot/resources/translations/Plot_nl.qm b/src/Mod/Plot/resources/translations/Plot_nl.qm index 41bc45a755..6f91832934 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_nl.qm and b/src/Mod/Plot/resources/translations/Plot_nl.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_nl.ts b/src/Mod/Plot/resources/translations/Plot_nl.ts index b38e1bb028..ff93de7a86 100644 --- a/src/Mod/Plot/resources/translations/Plot_nl.ts +++ b/src/Mod/Plot/resources/translations/Plot_nl.ts @@ -24,7 +24,7 @@ Configure the axes parameters - Configure the axes parameters + De parameters voor de assen instellen diff --git a/src/Mod/Plot/resources/translations/Plot_no.qm b/src/Mod/Plot/resources/translations/Plot_no.qm index d688880163..6f3b45c421 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_no.qm and b/src/Mod/Plot/resources/translations/Plot_no.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_no.ts b/src/Mod/Plot/resources/translations/Plot_no.ts index 22fb46e10b..73c2c2a899 100644 --- a/src/Mod/Plot/resources/translations/Plot_no.ts +++ b/src/Mod/Plot/resources/translations/Plot_no.ts @@ -115,7 +115,7 @@ Active axes - Active axes + Aktive akser @@ -256,7 +256,7 @@ Active axes - Active axes + Aktive akser diff --git a/src/Mod/Plot/resources/translations/Plot_pl.qm b/src/Mod/Plot/resources/translations/Plot_pl.qm index 66ea3b472b..fc1aa13cac 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_pl.qm and b/src/Mod/Plot/resources/translations/Plot_pl.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_pl.ts b/src/Mod/Plot/resources/translations/Plot_pl.ts index 83af459461..2ce97996dd 100644 --- a/src/Mod/Plot/resources/translations/Plot_pl.ts +++ b/src/Mod/Plot/resources/translations/Plot_pl.ts @@ -24,7 +24,7 @@ Configure the axes parameters - Configure the axes parameters + Konfiguracja parametrów osi @@ -89,7 +89,7 @@ Save the plot as an image file - Save the plot as an image file + Zapisz wydruk jako plik graficzny @@ -238,12 +238,12 @@ The grid must be activated on top of a plot document - The grid must be activated on top of a plot document + Siatka musi być aktywowana na górze dokumentu wydruku The legend must be activated on top of a plot document - The legend must be activated on top of a plot document + Legenda musi być aktywowana na górze dokumentu wydruku diff --git a/src/Mod/Plot/resources/translations/Plot_pt-PT.qm b/src/Mod/Plot/resources/translations/Plot_pt-PT.qm index a257e3d5a5..5321d36a1c 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_pt-PT.qm and b/src/Mod/Plot/resources/translations/Plot_pt-PT.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_pt-PT.ts b/src/Mod/Plot/resources/translations/Plot_pt-PT.ts index 85dd6fef02..9d1351e9c2 100644 --- a/src/Mod/Plot/resources/translations/Plot_pt-PT.ts +++ b/src/Mod/Plot/resources/translations/Plot_pt-PT.ts @@ -11,7 +11,7 @@ Plot - Plotagem + Traçar @@ -218,7 +218,7 @@ matplotlib not found, so Plot module can not be loaded - matplotlib not found, so Plot module can not be loaded + matplotlib não encontrado, então o módulo de traçagem não pode ser carregado @@ -395,22 +395,22 @@ No label - No label + Sem rótulo Remove serie - Remove serie + Remover serie Line style - Line style + Estilo de linha Marker - Marker + Marcador @@ -420,37 +420,37 @@ List of available series - List of available series + Lista de séries disponíveis Line title - Line title + Título de linha Marker style - Marker style + Estilo de marcador Line width - Line width + Largura da linha Marker size - Marker size + Tamanho do marcador Line and marker color - Line and marker color + Cor de linha e de marcador Removes this serie - Removes this serie + Remove esta série diff --git a/src/Mod/Plot/resources/translations/Plot_ro.qm b/src/Mod/Plot/resources/translations/Plot_ro.qm index df3e6a4382..5c59a37048 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_ro.qm and b/src/Mod/Plot/resources/translations/Plot_ro.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_ro.ts b/src/Mod/Plot/resources/translations/Plot_ro.ts index c1ab8409dd..b245cc7b43 100644 --- a/src/Mod/Plot/resources/translations/Plot_ro.ts +++ b/src/Mod/Plot/resources/translations/Plot_ro.ts @@ -24,7 +24,7 @@ Configure the axes parameters - Configure the axes parameters + Configurează parametrii axelor @@ -89,7 +89,7 @@ Save the plot as an image file - Save the plot as an image file + Salvează schița ca un fișier imagine @@ -238,12 +238,12 @@ The grid must be activated on top of a plot document - The grid must be activated on top of a plot document + Grila trebuie activată pe partea de sus a graficului unui document The legend must be activated on top of a plot document - The legend must be activated on top of a plot document + Legenda trebuie activată pe partea de sus a graficului documentului diff --git a/src/Mod/Plot/resources/translations/Plot_ru.qm b/src/Mod/Plot/resources/translations/Plot_ru.qm index 44d55e57d4..5c6eae868d 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_ru.qm and b/src/Mod/Plot/resources/translations/Plot_ru.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_ru.ts b/src/Mod/Plot/resources/translations/Plot_ru.ts index 5ffff89a94..d5068b3c6e 100644 --- a/src/Mod/Plot/resources/translations/Plot_ru.ts +++ b/src/Mod/Plot/resources/translations/Plot_ru.ts @@ -24,7 +24,7 @@ Configure the axes parameters - Configure the axes parameters + Настройка параметров осей @@ -89,7 +89,7 @@ Save the plot as an image file - Save the plot as an image file + Сохранить график как файл изображения @@ -238,12 +238,12 @@ The grid must be activated on top of a plot document - The grid must be activated on top of a plot document + Осевая сетка должна быть активирована поверх графика The legend must be activated on top of a plot document - The legend must be activated on top of a plot document + Легенда должна быть активирована поверх графика diff --git a/src/Mod/Plot/resources/translations/Plot_sr.qm b/src/Mod/Plot/resources/translations/Plot_sr.qm new file mode 100644 index 0000000000..5cc324ad77 Binary files /dev/null and b/src/Mod/Plot/resources/translations/Plot_sr.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_sr.ts b/src/Mod/Plot/resources/translations/Plot_sr.ts new file mode 100644 index 0000000000..02ab9a56d6 --- /dev/null +++ b/src/Mod/Plot/resources/translations/Plot_sr.ts @@ -0,0 +1,461 @@ + + + + + Plot + + + Plot edition tools + Алати за уређивање диаграма + + + + Plot + Диаграм + + + + Plot_Axes + + + Configure axes + Конфигуриши оcе + + + + Configure the axes parameters + Конфигуриши параметре оcа + + + + Plot_Grid + + + Show/Hide grid + Прикажи/Cакриј координатну мрежу + + + + Show/Hide grid on selected plot + Прикажи/Cакриј координатну мрежу на одабраном диаграму + + + + Plot_Labels + + + Set labels + Пcтави ознаке + + + + Set title and axes labels + Поcтави наcлов и ознаке оcа + + + + Plot_Legend + + + Show/Hide legend + Прикажи/Cакриј легенду + + + + Show/Hide legend on selected plot + Прикажи/Cакриј легенду на одабраном графикону + + + + Plot_Positions + + + Set positions and sizes + Поcтави позиције и величине + + + + Set labels and legend positions and sizes + Поcтави позицију и величину ознака и легенде + + + + Plot_SaveFig + + + Save plot + Cачувај диаграм + + + + Save the plot as an image file + Cачувај диаграм као cлику + + + + Plot_Series + + + Configure series + Конфигуриши cерије + + + + Configure series drawing style and label + Конфигуриши cтил цртежа и ознаке cерија + + + + plot_axes + + + Configure axes + Конфигуриши оcе + + + + Active axes + Активне оcе + + + + Apply to all axes + Примени на cве оcе + + + + Dimensions + Димензије + + + + X axis position + Позиција X оcе + + + + Y axis position + Позиција Y оcе + + + + Scales + Cкале + + + + X auto + X аутоматски + + + + Y auto + Y аутоматски + + + + Index of the active axes + Индекc активних оcа + + + + Add new axes to the plot + Додај нову оcу у графикон + + + + Remove selected axes + Уклони одабране оcе + + + + Check it to apply transformations to all axes + Штиклирај да примениш транcформације на cве оcе + + + + Left bound of axes + Лева граница оcа + + + + Right bound of axes + Деcна граница оcа + + + + Bottom bound of axes + Доња граница оcа + + + + Top bound of axes + Горња граница оcа + + + + Outward offset of X axis + Outward offset of X axis + + + + Outward offset of Y axis + Outward offset of Y axis + + + + X axis scale autoselection + X axis scale autoselection + + + + Y axis scale autoselection + Y axis scale autoselection + + + + plot_console + + + matplotlib not found, so Plot module can not be loaded + matplotlib није пронађен, па Диаграм модул није могуће учитати + + + + matplotlib not found, Plot module will be disabled + matplotlib није пронађен, Диаграм модул ће бити иcкључен + + + + Plot document must be selected in order to save it + Диаграм документ мора бити одабран да би га cачували + + + + Axes 0 can not be deleted + Оcа 0 cе не може обриcати + + + + The grid must be activated on top of a plot document + Координатни cиcтем мора бити активиран на врху дијаграма + + + + The legend must be activated on top of a plot document + Легенда мора бити активирана изнад дијаграма + + + + plot_labels + + + Set labels + Пcтави ознаке + + + + Active axes + Активне оcе + + + + Title + Наслов + + + + X label + X ознака + + + + Y label + Y ознака + + + + Index of the active axes + Индекc активних оcа + + + + Title (associated to active axes) + Наcлов (додељен активној оcи) + + + + Title font size + Величина фонта за наслов + + + + X axis title + Наcлов X оcе + + + + X axis title font size + Величина фонта наcлова X оcе + + + + Y axis title + Наcлов Y оcе + + + + Y axis title font size + Величина фонта наcлова Y оcе + + + + plot_positions + + + Set positions and sizes + Поcтави позиције и величине + + + + Position + Position + + + + Size + Величина + + + + List of modificable items + Лиcта променљивих cтавки + + + + X item position + Позиција X cтавке + + + + Y item position + Позиција Y cтавке + + + + Item size + Величина cтавке + + + + plot_save + + + Save figure + Save figure + + + + Inches + Инча + + + + Dots per Inch + Тачака по инчу + + + + Output image file path + Пут до одредишне датотеке cлике + + + + Show a file selection dialog + Прикажи дијалог избора датотеке + + + + X image size + Величина X cлике + + + + Y image size + Величина Y cлике + + + + Dots per point, with size will define output image resolution + Dots per point, with size will define output image resolution + + + + plot_series + + + No label + Нема ознака + + + + Remove serie + Remove serie + + + + Line style + Cтил линије + + + + Marker + Маркер + + + + Configure series + Конфигуриши cерије + + + + List of available series + List of available series + + + + Line title + Line title + + + + Marker style + Cтил маркера + + + + Line width + Ширина линије + + + + Marker size + Величина маркера + + + + Line and marker color + Боја линије и маркера + + + + Removes this serie + Removes this serie + + + + If checked serie will not be considered for legend + If checked serie will not be considered for legend + + + diff --git a/src/Mod/Plot/resources/translations/Plot_sv-SE.qm b/src/Mod/Plot/resources/translations/Plot_sv-SE.qm index d0f2ab98de..11f6c017a8 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_sv-SE.qm and b/src/Mod/Plot/resources/translations/Plot_sv-SE.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_sv-SE.ts b/src/Mod/Plot/resources/translations/Plot_sv-SE.ts index 7a56ccade8..b698c53f6d 100644 --- a/src/Mod/Plot/resources/translations/Plot_sv-SE.ts +++ b/src/Mod/Plot/resources/translations/Plot_sv-SE.ts @@ -24,7 +24,7 @@ Configure the axes parameters - Configure the axes parameters + Konfigurera axelparametrarna @@ -89,7 +89,7 @@ Save the plot as an image file - Save the plot as an image file + Spara plotten som bildfil @@ -97,12 +97,12 @@ Configure series - Configure series + Konfigurera serien Configure series drawing style and label - Configure series drawing style and label + Konfigurera seriens utseende och etikett @@ -170,7 +170,7 @@ Check it to apply transformations to all axes - Check it to apply transformations to all axes + Markera för att applicera transform på alla axlar @@ -195,12 +195,12 @@ Outward offset of X axis - Outward offset of X axis + Yttre förskjutning av X-axeln Outward offset of Y axis - Outward offset of Y axis + Yttre förskjutning av X-axeln @@ -218,22 +218,22 @@ matplotlib not found, so Plot module can not be loaded - matplotlib not found, so Plot module can not be loaded + matplotlib hittades inte, så Plot-modulen kan inte läsas in matplotlib not found, Plot module will be disabled - matplotlib not found, Plot module will be disabled + matplotlib hittades inte, Plot-modul kommer inaktiveras Plot document must be selected in order to save it - Plot document must be selected in order to save it + Plotdokument måste väljas för att spara det Axes 0 can not be deleted - Axes 0 can not be deleted + Axel 0 kan inte tas bort @@ -281,7 +281,7 @@ Title (associated to active axes) - Title (associated to active axes) + Titel (associerad med aktiva axlar) @@ -329,22 +329,22 @@ List of modificable items - List of modificable items + Lista över ändringsbara objekt X item position - X item position + X objekt placering Y item position - Y item position + Y objekt placering Item size - Item size + Objektstorlek @@ -415,7 +415,7 @@ Configure series - Configure series + Konfigurera serien @@ -445,7 +445,7 @@ Line and marker color - Line and marker color + Linje- och markörfärg diff --git a/src/Mod/Plot/resources/translations/Plot_uk.qm b/src/Mod/Plot/resources/translations/Plot_uk.qm index c770bf8124..aaea24e47c 100644 Binary files a/src/Mod/Plot/resources/translations/Plot_uk.qm and b/src/Mod/Plot/resources/translations/Plot_uk.qm differ diff --git a/src/Mod/Plot/resources/translations/Plot_uk.ts b/src/Mod/Plot/resources/translations/Plot_uk.ts index be88754e22..2925e5c38e 100644 --- a/src/Mod/Plot/resources/translations/Plot_uk.ts +++ b/src/Mod/Plot/resources/translations/Plot_uk.ts @@ -24,7 +24,7 @@ Configure the axes parameters - Configure the axes parameters + Налаштування параметрів осей @@ -89,7 +89,7 @@ Save the plot as an image file - Save the plot as an image file + Зберегти діаграму як файл зображення @@ -238,12 +238,12 @@ The grid must be activated on top of a plot document - The grid must be activated on top of a plot document + Сітка має бути активована поверх діаграми The legend must be activated on top of a plot document - The legend must be activated on top of a plot document + Опис позначок має бути активований поверх діаграми diff --git a/src/Mod/Points/Gui/Resources/Points.qrc b/src/Mod/Points/Gui/Resources/Points.qrc index e6ab2d1248..55eab85da7 100644 --- a/src/Mod/Points/Gui/Resources/Points.qrc +++ b/src/Mod/Points/Gui/Resources/Points.qrc @@ -25,5 +25,6 @@ translations/Points_ro.qm translations/Points_hu.qm translations/Points_pt-PT.qm + translations/Points_sr.qm diff --git a/src/Mod/Points/Gui/Resources/translations/Points_de.qm b/src/Mod/Points/Gui/Resources/translations/Points_de.qm index fe1c43d546..9712a170bb 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_de.qm and b/src/Mod/Points/Gui/Resources/translations/Points_de.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_de.ts b/src/Mod/Points/Gui/Resources/translations/Points_de.ts index 39c691c958..cbdc2df28a 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_de.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_de.ts @@ -1,6 +1,6 @@ - + CmdPointsExport @@ -232,7 +232,7 @@ Ascii Points (*.asc);;All Files (*.*) - ASCII-Punkte (*.asc);;Alle Dateien (*.*) + ASCII-Punkte (.asc); Alle Dateien (*.*) diff --git a/src/Mod/Points/Gui/Resources/translations/Points_pt-PT.qm b/src/Mod/Points/Gui/Resources/translations/Points_pt-PT.qm index fb874a164d..b40e8bcdb3 100644 Binary files a/src/Mod/Points/Gui/Resources/translations/Points_pt-PT.qm and b/src/Mod/Points/Gui/Resources/translations/Points_pt-PT.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_pt-PT.ts b/src/Mod/Points/Gui/Resources/translations/Points_pt-PT.ts index 2ae072c13c..083d630848 100644 --- a/src/Mod/Points/Gui/Resources/translations/Points_pt-PT.ts +++ b/src/Mod/Points/Gui/Resources/translations/Points_pt-PT.ts @@ -18,7 +18,7 @@ Exports a point cloud - Exports a point cloud + Exporta uma nuvem de pontos @@ -38,7 +38,7 @@ Imports a point cloud - Imports a point cloud + Importar uma nuvem de pontos @@ -51,14 +51,14 @@ Cut point cloud - Cut point cloud + Cortar nuvem de pontos Cuts a point cloud with a picked polygon - Cuts a point cloud with a picked polygon + Corta uma nuvem de pontos com um polígono traçado @@ -78,7 +78,7 @@ Test to transform a point cloud - Test to transform a point cloud + Teste para transformar uma nuvem de pontos @@ -111,7 +111,7 @@ Cluster by lines starting with: - Cluster by lines starting with: + Agrupar por linhas começando com: @@ -126,7 +126,7 @@ Number separator: - Number separator: + Separador de número: diff --git a/src/Mod/Points/Gui/Resources/translations/Points_sr.qm b/src/Mod/Points/Gui/Resources/translations/Points_sr.qm new file mode 100644 index 0000000000..55645aaea9 Binary files /dev/null and b/src/Mod/Points/Gui/Resources/translations/Points_sr.qm differ diff --git a/src/Mod/Points/Gui/Resources/translations/Points_sr.ts b/src/Mod/Points/Gui/Resources/translations/Points_sr.ts new file mode 100644 index 0000000000..18a67d3817 --- /dev/null +++ b/src/Mod/Points/Gui/Resources/translations/Points_sr.ts @@ -0,0 +1,251 @@ + + + + + CmdPointsExport + + + Points + Тачке + + + + Export points... + Извези тачке... + + + + + + Exports a point cloud + Извози облак тачака + + + + CmdPointsImport + + + Points + Тачке + + + + Import points... + Увези тачке... + + + + + + Imports a point cloud + Увози облак тачака + + + + CmdPointsPolyCut + + + Points + Тачке + + + + Cut point cloud + Исеци облак тачака + + + + + + Cuts a point cloud with a picked polygon + Сече облак тачака са изабраним многоуглом + + + + CmdPointsTransform + + + Points + Тачке + + + + Transform Points + Трансформисати Тачке + + + + + + Test to transform a point cloud + Теcт да cе транcформише облак тачака + + + + PointsGui::DlgPointsRead + + + ASCII points import + ASCII увоз тачака + + + + Template: + Шаблон: + + + + Special lines + Специјалне линије + + + + First line: + Прва линија: + + + + Ignore + Занемари + + + + Cluster by lines starting with: + Клаcтер линијама које почињу cа: + + + + Ignore lines starting with: + Занемари линије почевши од: + + + + Point format + Формат тачака + + + + Number separator: + Бројни cепаратор: + + + + Points format: + Формат тачака: + + + + + + Next block: + Следећи блок: + + + + , + , + + + + ; + ; + + + + \t + \t + + + + \w + \w + + + + X,Y,Z + X,Y,Z + + + + X,Y + X,Y + + + + + + none + ништа + + + + + + I,J,K (normal vector) + I,J,K (вектор нормале) + + + + + + I,K (normal vector 2D) + I,K (вектор нормале 2D) + + + + + + R,G,B (color) + R,G,B (боја) + + + + + + I (Gray value) + I (Вредност Сиве) + + + + Preview + Преглед + + + + 100 + 100 + + + + Number of points + Број тачака + + + + Number of previewed lines: + Број прегледаних линија: + + + + QObject + + + + Ascii Points (*.asc);;All Files (*.*) + Ascii Тачке (*.asc);;Све Датотеке (*.*) + + + + Workbench + + + Points tools + Алати тачака + + + + &Points + &Тачке + + + diff --git a/src/Mod/Raytracing/Gui/Resources/Raytracing.qrc b/src/Mod/Raytracing/Gui/Resources/Raytracing.qrc index 122c988bf6..f9a1412363 100644 --- a/src/Mod/Raytracing/Gui/Resources/Raytracing.qrc +++ b/src/Mod/Raytracing/Gui/Resources/Raytracing.qrc @@ -33,5 +33,6 @@ translations/Raytracing_ro.qm translations/Raytracing_hu.qm translations/Raytracing_pt-PT.qm + translations/Raytracing_sr.qm diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_af.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_af.qm index 0712f6bfbd..fc3c9e62f9 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_af.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_af.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_af.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_af.ts index 68b7e6db42..666ddfd1ba 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_af.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_af.ts @@ -91,12 +91,12 @@ New POV-Ray project - + New POV-Ray project Insert new POV-Ray project into the document - + Insert new POV-Ray project into the document @@ -155,12 +155,12 @@ Export camera to POV-Ray... - + Export camera to POV-Ray... Export the camera positon of the active 3D view in POV-Ray format to a file - + Export the camera positon of the active 3D view in POV-Ray format to a file Export camera to povray... @@ -181,12 +181,12 @@ Export part to POV-Ray... - + Export part to POV-Ray... Write the selected Part (object) as a POV-Ray file - + Write the selected Part (object) as a POV-Ray file Export part to povray... @@ -213,17 +213,18 @@ The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. Do you want to continue? - + The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. +Do you want to continue? Export view to POV-Ray... - + Export view to POV-Ray... Write the active 3D view with camera and all its content to a POV-Ray file - + Write the active 3D view with camera and all its content to a POV-Ray file The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. @@ -262,7 +263,7 @@ Do you want to continue? POV-Ray (*.pov) - + POV-Ray (*.pov) @@ -284,7 +285,7 @@ Do you want to continue? POV-Ray(*.pov) - + POV-Ray(*.pov) @@ -326,39 +327,27 @@ Do you want to continue? POV-Ray not found - + POV-Ray not found Please set the path to the POV-Ray executable in the preferences. - + Please set the path to the POV-Ray executable in the preferences. Please correct the path to the POV-Ray executable in the preferences. - + Please correct the path to the POV-Ray executable in the preferences. Lux project file missing - + Lux project file missing The Lux project file doesn't exist. - - - - Povray not found - Povray not found - - - Please set the path to the povray executable in the preferences. - Please set the path to the povray executable in the preferences. - - - Please correct the path to the povray executable in the preferences. - Please correct the path to the povray executable in the preferences. + The Lux project file doesn't exist. @@ -379,17 +368,17 @@ Do you want to continue? POV-Ray file missing - + POV-Ray file missing The POV-Ray project file doesn't exist. - + The POV-Ray project file doesn't exist. Rendered image (*.bmp) - + Rendered image (*.bmp) @@ -428,22 +417,22 @@ Do you want to continue? The path to the POV-Ray executable, if you want to render from FreeCAD - + The path to the POV-Ray executable, if you want to render from FreeCAD POV-Ray executable: - + POV-Ray executable: POV-Ray output parameters: - + POV-Ray output parameters: The POV-Ray parameters to be passed to the render. - + The POV-Ray parameters to be passed to the render. @@ -465,22 +454,6 @@ Do you want to continue? Render Render - - The path to the povray executable, if you want to render from FreeCAD - The path to the povray executable, if you want to render from FreeCAD - - - Povray executable: - Povray executable: - - - Povray output parameters: - Povray output parameters: - - - The povray parameters to be passed to the render. - The povray parameters to be passed to the render. - +P +A diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_cs.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_cs.qm index c67bb58507..2ab8c51951 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_cs.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_cs.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_cs.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_cs.ts index 65179a97e4..b5521c1d35 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_cs.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_cs.ts @@ -91,12 +91,12 @@ New POV-Ray project - + New POV-Ray project Insert new POV-Ray project into the document - + Insert new POV-Ray project into the document @@ -155,12 +155,12 @@ Export camera to POV-Ray... - + Export camera to POV-Ray... Export the camera positon of the active 3D view in POV-Ray format to a file - + Export the camera positon of the active 3D view in POV-Ray format to a file Export camera to povray... @@ -181,12 +181,12 @@ Export part to POV-Ray... - + Export part to POV-Ray... Write the selected Part (object) as a POV-Ray file - + Write the selected Part (object) as a POV-Ray file Export part to povray... @@ -213,17 +213,18 @@ The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. Do you want to continue? - + The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. +Do you want to continue? Export view to POV-Ray... - + Export view to POV-Ray... Write the active 3D view with camera and all its content to a POV-Ray file - + Write the active 3D view with camera and all its content to a POV-Ray file The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. @@ -262,7 +263,7 @@ Do you want to continue? POV-Ray (*.pov) - + POV-Ray (*.pov) @@ -284,7 +285,7 @@ Do you want to continue? POV-Ray(*.pov) - + POV-Ray(*.pov) @@ -326,39 +327,27 @@ Do you want to continue? POV-Ray not found - + POV-Ray not found Please set the path to the POV-Ray executable in the preferences. - + Please set the path to the POV-Ray executable in the preferences. Please correct the path to the POV-Ray executable in the preferences. - + Please correct the path to the POV-Ray executable in the preferences. Lux project file missing - + Lux project file missing The Lux project file doesn't exist. - - - - Povray not found - Povray not found - - - Please set the path to the povray executable in the preferences. - Please set the path to the povray executable in the preferences. - - - Please correct the path to the povray executable in the preferences. - Please correct the path to the povray executable in the preferences. + The Lux project file doesn't exist. @@ -379,17 +368,17 @@ Do you want to continue? POV-Ray file missing - + POV-Ray file missing The POV-Ray project file doesn't exist. - + The POV-Ray project file doesn't exist. Rendered image (*.bmp) - + Rendered image (*.bmp) @@ -428,22 +417,22 @@ Do you want to continue? The path to the POV-Ray executable, if you want to render from FreeCAD - + The path to the POV-Ray executable, if you want to render from FreeCAD POV-Ray executable: - + POV-Ray executable: POV-Ray output parameters: - + POV-Ray output parameters: The POV-Ray parameters to be passed to the render. - + The POV-Ray parameters to be passed to the render. @@ -465,22 +454,6 @@ Do you want to continue? Render Vykreslit - - The path to the povray executable, if you want to render from FreeCAD - The path to the povray executable, if you want to render from FreeCAD - - - Povray executable: - Spustitelný soubor povray: - - - Povray output parameters: - Výstupní parametry povray: - - - The povray parameters to be passed to the render. - Povray parametry, které mají být použity k vykreslování. - +P +A diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.qm index 64572b64b5..d71d379953 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.ts index 93066182d5..d560bc34f0 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_de.ts @@ -1,6 +1,6 @@ - + CmdRaytracingExportProject @@ -16,7 +16,7 @@ Export a Raytracing project to a file - + Ein Raytracing-Projekt in eine Datei exportieren Export the Povray project file @@ -33,22 +33,22 @@ New Luxrender project - + Neues Luxrender-Projekt Insert new Luxrender project into the document - + Neues Luxrender-Projekt in das Dokument einfügen No template - + Keine Vorlage No template available - + Keine Vorlage verfügbar @@ -66,7 +66,7 @@ Insert a new part object into a Raytracing project - + Einfügen eines neuen Part-Objektes in ein Raytracing-Projekt Insert a new part object into a Povray project @@ -91,22 +91,22 @@ New POV-Ray project - + Neues POV-Ray-Projekt Insert new POV-Ray project into the document - + Neues POV-Ray-Projekt in das Dokument einfügen No template - + Keine Vorlage No template available - + Keine Vorlage verfügbar @@ -119,12 +119,12 @@ &Render - + &Rendern Renders the current raytracing project with an external renderer - + Das aktuelle Raytracing-Projekt mit einem externen Renderer rendern @@ -137,12 +137,12 @@ &Reset Camera - + Kamera zu&rücksetzen Sets the camera of the selected Raytracing project to match the current view - + Setzen der Kamera-Eigenschaften im gewählten Raytracing-Projekt gemäß der aktuellen Ansicht @@ -155,12 +155,12 @@ Export camera to POV-Ray... - + Exportieren Sie die Kamera in POV-Ray... Export the camera positon of the active 3D view in POV-Ray format to a file - + Exportieren Sie die Kamera-Position der aktiven 3D Ansicht im POV-Ray-Format in eine Datei Export camera to povray... @@ -181,12 +181,12 @@ Export part to POV-Ray... - + Exportieren Sie Teil in POV-Ray... Write the selected Part (object) as a POV-Ray file - + Speichern Sie das ausgewählte Teil (Objekt) als eine POV-Ray-Datei Export part to povray... @@ -213,17 +213,18 @@ The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. Do you want to continue? - + Die aktuelle Kamera ist nicht perspektivisch und damit kann das Ergebnis anders aussehen als Sie es erwarten. +Möchten Sie fortfahren? Export view to POV-Ray... - + Exportieren Sie die Ansicht in POV-Ray... Write the active 3D view with camera and all its content to a POV-Ray file - + Speichern Sie die aktive 3D Ansicht mit Kamera und allen seinen Inhalten in eine POV-Ray-Datei The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. @@ -248,7 +249,7 @@ Möchten Sie fortfahren? The current view camera is not perspective and thus the result of the luxrender image later might look different to what you expect. Do you want to continue? - + Die aktuelle Kamera-Ansicht ist keine Perspektive und somit wird das Ergebnis des Luxrender-Bildes später möglicherweise anders aussehen, als Sie erwarten. Möchten Sie fortfahren? @@ -261,7 +262,7 @@ Do you want to continue? POV-Ray (*.pov) - + POV-Ray (*.pov) @@ -283,7 +284,7 @@ Do you want to continue? POV-Ray(*.pov) - + POV-Ray (*.pov) @@ -302,91 +303,91 @@ Do you want to continue? No Raytracing project to insert - + Kein Raytracing-Projekt zum Einfügen Create a Raytracing project to insert a view. - + Erstellen Sie ein Raytracing-Projekt um eine Ansicht einzufügen. Select a Raytracing project to insert the view. - + Wählen Sie ein Raytracing-Projekt um die Ansicht einzufügen. Select one Raytracing project object. - + Wählen Sie ein Raytracing-Projekt-Objekt. POV-Ray not found - + POV-Ray nicht gefunden Please set the path to the POV-Ray executable in the preferences. - + Bitte setzen Sie den Pfad auf die Povray Programm-Datei in den "Einstellungen". Please correct the path to the POV-Ray executable in the preferences. - + Bitte korrigieren Sie den Pfad zu der POVRay Programm-Datei in den Voreinstellungen. Lux project file missing - + Lux-Projekt-Datei fehlt The Lux project file doesn't exist. - + Die Lux-Projekt-Datei existiert nicht. Luxrender not found - + Luxrender nicht gefunden Please set the path to the luxrender or luxconsole executable in the preferences. - + Bitte setzen Sie den Pfad zu der Luxrender- oder Luxconsole-Programm-Datei in den "Einstellungen". Please correct the path to the luxrender or luxconsole executable in the preferences. - + Bitte korrigieren Sie den Pfad zu der Luxrender- oder Luxconsole-Programm-Datei in den "Einstellungen". POV-Ray file missing - + POV-Ray-Datei fehlt The POV-Ray project file doesn't exist. - + Die POV-Ray-Projekt-Datei existiert nicht. Rendered image (*.bmp) - + Gerendertes Bild (*.bmp) Rendered image (*.png) - + Gerendertes Bild (*.png) Rendered image - + Gerendertes Bild No Povray project to insert @@ -415,22 +416,22 @@ Do you want to continue? The path to the POV-Ray executable, if you want to render from FreeCAD - + Der Pfad zur POVRay-Programm-Datei, wenn Sie von FreeCAD aus rendern möchten POV-Ray executable: - + POV-Ray ausführbare Datei: POV-Ray output parameters: - + POV-Ray-Output-Parameter: The POV-Ray parameters to be passed to the render. - + Die POV-Ray-Parameter die an das Rendering übergeben werden sollen. @@ -450,42 +451,42 @@ Do you want to continue? Render - + Rendern +P +A - + +P +A +W: - + +W:  The width of the rendered image - + Die Breite des gerenderten Bildes +H : - +  +H :  The height of the rendered image - + Die Höhe des gerenderten Bildes Luxrender executable: - + Luxrender-Programmdatei: The path to the luxrender (or luxconsole) executable - + Der Pfad zur Luxrender (oder Luxconsole) Programm-Datei @@ -497,7 +498,7 @@ Do you want to continue? Used by utility tools - + Von Dienstprogramm-Tools verwendet @@ -535,17 +536,17 @@ Do you want to continue? Edit LuxRender project - + LuxRender-Projekt bearbeiten LuxRender template - + LuxRender-Vorlage Select a LuxRender template - + Wählen Sie eine LuxRender-Vorlage @@ -553,17 +554,17 @@ Do you want to continue? Edit Povray project - + Povray-Projekt bearbeiten Povray template - + Povray-Vorlage Select a Povray template - + Wählen Sie eine Povray-Vorlage diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_es-ES.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_es-ES.qm index 6b3ce66799..9014e58331 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_es-ES.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_es-ES.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_es-ES.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_es-ES.ts index 2c36f5cd2f..2b1978b26f 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_es-ES.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_es-ES.ts @@ -91,12 +91,12 @@ New POV-Ray project - + Nuevo proyecto de POV-Ray Insert new POV-Ray project into the document - + Inserte el nuevo proyecto de POV-Ray en el documento @@ -155,12 +155,12 @@ Export camera to POV-Ray... - + Exportar cámara a POV-Ray... Export the camera positon of the active 3D view in POV-Ray format to a file - + Exporta la posición de la cámara de la vista 3D activa en formato POV-Ray a un archivo Export camera to povray... @@ -181,12 +181,12 @@ Export part to POV-Ray... - + Exportar pieza a POV-Ray... Write the selected Part (object) as a POV-Ray file - + Escribir la parte seleccionada (objeto) como un archivo de POV-Ray Export part to povray... @@ -213,22 +213,22 @@ The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. Do you want to continue? - + La vista de cámara actual no está en perspectiva por lo que el resultado de la imagen de POV-Ray podría verse distinto a lo que esperas. ¿Deseas continuar? Export view to POV-Ray... - + Exportar vista a POV-Ray... Write the active 3D view with camera and all its content to a POV-Ray file - + Escribir la vista 3D activa con cámara y todo su contenido a un archivo de POV-Ray The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. Do you want to continue? - La vista de cámara actual no es en perspectiva por lo que el resultado de la imagen de povray podria verse distinto a lo que usted espera. ¿Desea continuar? + La vista de cámara actual no es en perspectiva por lo que el resultado de la imagen de povray podría verse distinto a lo que usted espera. ¿Desea continuar? @@ -261,7 +261,7 @@ Do you want to continue? POV-Ray (*.pov) - + POV-Ray (*.pov) @@ -283,7 +283,7 @@ Do you want to continue? POV-Ray(*.pov) - + POV-Ray (*.pov) @@ -325,39 +325,27 @@ Do you want to continue? POV-Ray not found - + POV-Ray no encontrado Please set the path to the POV-Ray executable in the preferences. - + Por favor establezca la ruta del ejecutable de POV-Ray en las preferencias. Please correct the path to the POV-Ray executable in the preferences. - + Por favor corrige la ruta del ejecutable de POV-Ray en las preferencias. Lux project file missing - + Falta el archivo de proyecto Lux The Lux project file doesn't exist. - - - - Povray not found - Povray no encontrado - - - Please set the path to the povray executable in the preferences. - Por favor establezca la ruta del ejecutable de povray en las preferencias. - - - Please correct the path to the povray executable in the preferences. - Por favor corrija la ruta del ejecutable de povray en las preferencias. + No existe el archivo de proyecto de Lux. @@ -378,17 +366,17 @@ Do you want to continue? POV-Ray file missing - + Falta el archivo POV-Ray The POV-Ray project file doesn't exist. - + No existe el archivo de proyecto de POV-Ray. Rendered image (*.bmp) - + Imagen renderizada (*.bmp) @@ -427,22 +415,22 @@ Do you want to continue? The path to the POV-Ray executable, if you want to render from FreeCAD - + La ruta del ejecutable de POV-Ray, si quieres renderizar desde FreeCAD POV-Ray executable: - + Ejecutable de POV-Ray: POV-Ray output parameters: - + Parámetros de salida de POV-Ray: The POV-Ray parameters to be passed to the render. - + Los parámetros de POV-Ray que se pasan al render. @@ -464,22 +452,6 @@ Do you want to continue? Render Renderizar - - The path to the povray executable, if you want to render from FreeCAD - La ruta al ejecutable de povray, si quieres renderizar desde FreeCAD - - - Povray executable: - Ejecutable de Povray: - - - Povray output parameters: - Parámetros de salida Povray: - - - The povray parameters to be passed to the render. - Los parámetros de povray que deben pasarse al renderizador. - +P +A diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fi.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fi.qm index adbb0b69ef..8bfa0cd8ee 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fi.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fi.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fi.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fi.ts index 660da47c4f..d7b19d776e 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fi.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fi.ts @@ -16,7 +16,7 @@ Export a Raytracing project to a file - Export a Raytracing project to a file + Raytracing projektin vieminen tiedostoon Export the Povray project file @@ -33,22 +33,22 @@ New Luxrender project - New Luxrender project + Uusi Luxrender projekti Insert new Luxrender project into the document - Insert new Luxrender project into the document + Lisää uusi Luxrender projekti asiakirjaan No template - No template + Ei mitään mallia No template available - No template available + Ei mitään mallia saatavilla @@ -66,7 +66,7 @@ Insert a new part object into a Raytracing project - Insert a new part object into a Raytracing project + Lisää uusi osaobjekti Raytracing projektiin Insert a new part object into a Povray project @@ -91,22 +91,22 @@ New POV-Ray project - + Uusi POV-Ray projekti Insert new POV-Ray project into the document - + Lisää uusi POV-Ray projekti asiakirjaan No template - No template + Ei mitään mallia No template available - No template available + Ei mitään mallia saatavilla @@ -119,12 +119,12 @@ &Render - &Render + &Tee kuvalaskenta/ render Renders the current raytracing project with an external renderer - Renders the current raytracing project with an external renderer + Laskee/renderöi nykyisen sädeseuranta-projektin ulkoisella kuvanlaskennalla/renderöinnillä @@ -137,12 +137,12 @@ &Reset Camera - &Reset Camera + & Nollaa kamera Sets the camera of the selected Raytracing project to match the current view - Sets the camera of the selected Raytracing project to match the current view + Määrittää kameran valittuun sädeseuranta- projektin nykyiseen näkymään @@ -155,12 +155,12 @@ Export camera to POV-Ray... - + Vie kameran POV-Ray... Export the camera positon of the active 3D view in POV-Ray format to a file - + Vie kameran asema aktiivisessa 3D POV-Ray muodossa tiedostoon Export camera to povray... @@ -181,12 +181,12 @@ Export part to POV-Ray... - + Vie osan POV-Ray... Write the selected Part (object) as a POV-Ray file - + Kirjoita valitun osan (kohteen) POV-Ray -tiedostona Export part to povray... @@ -213,17 +213,18 @@ The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. Do you want to continue? - + Nykyisessä näkymässä kamera ei ole näkökulman mukainen ja siten POV-Ray kuva saattaa myöhemmin näyttää erilaiselta kuin odotat. +Haluatko jatkaa? Export view to POV-Ray... - + Näkymän vieminen POV-Ray... Write the active 3D view with camera and all its content to a POV-Ray file - + Tallenna aktiivinen kameran 3D näkymä ja kaikki sen sisältö POV-Ray tiedostoon The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. @@ -248,8 +249,8 @@ Haluatko jatkaa? The current view camera is not perspective and thus the result of the luxrender image later might look different to what you expect. Do you want to continue? - The current view camera is not perspective and thus the result of the luxrender image later might look different to what you expect. -Do you want to continue? + Nykyisessä näkymässä kamera ei ole näkökulman mukainen ja siten POV-Ray kuva saattaa myöhemmin näyttää erilaiselta kuin odotat. +Haluatko jatkaa? @@ -262,7 +263,7 @@ Do you want to continue? POV-Ray (*.pov) - + POV-Ray (*.pov) @@ -284,7 +285,7 @@ Do you want to continue? POV-Ray(*.pov) - + POV-Ray (*.pov) @@ -303,103 +304,91 @@ Do you want to continue? No Raytracing project to insert - No Raytracing project to insert + Ei ole sädeseuranta -projektia, johon lisätä Create a Raytracing project to insert a view. - Create a Raytracing project to insert a view. + Luo sädeseuranta -projekti näkymän lisäämiseksi. Select a Raytracing project to insert the view. - Select a Raytracing project to insert the view. + Valitse sädeseuranta -projekti, johon lisäät näkymän. Select one Raytracing project object. - Select one Raytracing project object. + EValitse ykis sädeseuranta -projektin kohde. POV-Ray not found - + POV-Ray ei löydy Please set the path to the POV-Ray executable in the preferences. - + Aseta polku POV-Ray executable -ohjelma asetuksista. Please correct the path to the POV-Ray executable in the preferences. - + Korjaa kansio POV-Ray executable -ohjelmille asetuksista. Lux project file missing - + Lux projektin tiedosto puuttuu The Lux project file doesn't exist. - - - - Povray not found - Povray not found - - - Please set the path to the povray executable in the preferences. - Please set the path to the povray executable in the preferences. - - - Please correct the path to the povray executable in the preferences. - Please correct the path to the povray executable in the preferences. + Lux-projektitiedostoa ei ole olemassa. Luxrender not found - Luxrender not found + Luxrender ei löydy Please set the path to the luxrender or luxconsole executable in the preferences. - Please set the path to the luxrender or luxconsole executable in the preferences. + Aseta kansio luxrender tai luxconsole -suoritettavien ohjelmien asetuksissa. Please correct the path to the luxrender or luxconsole executable in the preferences. - Please correct the path to the luxrender or luxconsole executable in the preferences. + Korjaa kansio luxrender tai luxconsole -suoritettavat ohjelmat asetuksissa. POV-Ray file missing - + POV-Ray tiedosto puuttuu The POV-Ray project file doesn't exist. - + POV-Ray projektitiedostoa ei ole olemassa. Rendered image (*.bmp) - + Kuvalaskenta/renderöinti kuva (*.bmp) Rendered image (*.png) - Rendered image (*.png) + kuvalaskettu/renderöity kuva (*.png) Rendered image - Rendered image + kuvalaskettu/renderöity kuva No Povray project to insert @@ -428,22 +417,22 @@ Do you want to continue? The path to the POV-Ray executable, if you want to render from FreeCAD - + POV-Ray suoritettavan ohjelman kansio, jos haluat laskea/renderöidä FreeCAD:stä POV-Ray executable: - + POV-Ray suoritettava ohjelma: POV-Ray output parameters: - + POV-Ray tuotannon muuttujat: The POV-Ray parameters to be passed to the render. - + POV-Ray tuotannon muuttujat, jotka viedään kuvalaskentaan. @@ -463,23 +452,7 @@ Do you want to continue? Render - Render - - - The path to the povray executable, if you want to render from FreeCAD - The path to the povray executable, if you want to render from FreeCAD - - - Povray executable: - Povray executable: - - - Povray output parameters: - Povray output parameters: - - - The povray parameters to be passed to the render. - The povray parameters to be passed to the render. + Mallinna/render @@ -494,7 +467,7 @@ Do you want to continue? The width of the rendered image - The width of the rendered image + Mallinnetun kuvan leveys @@ -504,17 +477,17 @@ Do you want to continue? The height of the rendered image - The height of the rendered image + Malloinnetun kuvan korkeus Luxrender executable: - Luxrender executable: + Luxrender suoritettava ohjelma: The path to the luxrender (or luxconsole) executable - The path to the luxrender (or luxconsole) executable + Tiedostokansio luxrender (tai luxconsole) suoritettavaan ohjelmaan @@ -526,7 +499,7 @@ Do you want to continue? Used by utility tools - Used by utility tools + Aputyökalujen käytössä @@ -541,17 +514,17 @@ Do you want to continue? Mesh export settings - Verkon vientiasetukset + Verkkopinnan vientiasetukset max mesh deviation: - maksimi verkon poikkeama: + Suurin verkkopinnan poikkeama: Do not calculate vertex normals - Älä laskea normaaleita kärkipisteitä + Älä laske normaaleja kärkipisteitä @@ -564,17 +537,17 @@ Do you want to continue? Edit LuxRender project - Edit LuxRender project + Muokaka LuxRender -projektia LuxRender template - LuxRender template + LuxRender malli Select a LuxRender template - Select a LuxRender template + Vaölitse LuxRender malli @@ -582,17 +555,17 @@ Do you want to continue? Edit Povray project - Edit Povray project + Muokkaa Povray projektia Povray template - Povray template + Povray malli Select a Povray template - Select a Povray template + Valitse Povray malli diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fr.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fr.qm index 3587bce561..abd4d4d19a 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fr.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fr.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fr.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fr.ts index b5b5f3d8d4..4e49f7d2bc 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fr.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_fr.ts @@ -91,12 +91,12 @@ New POV-Ray project - + Nouveau projet POV-Ray Insert new POV-Ray project into the document - + Insérez un nouveau projet POV-Ray dans le document @@ -155,12 +155,12 @@ Export camera to POV-Ray... - + Exporter la caméra vers POV-Ray... Export the camera positon of the active 3D view in POV-Ray format to a file - + Exporter la position de la caméra de la vue 3D active dans un fichier au format POV-Ray Export camera to povray... @@ -181,12 +181,12 @@ Export part to POV-Ray... - + Exporter la pièce vers POV-Ray... Write the selected Part (object) as a POV-Ray file - + Écrire la pièce sélectionnée (objet) dans un fichier au format POV-Ray Export part to povray... @@ -213,17 +213,17 @@ The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. Do you want to continue? - + La vue actuelle n'est pas en perspective, donc le résultat de l'image de POV-Ray pourrait être différent de ce que vous attendez. Voulez-vous continuer? Export view to POV-Ray... - + Exporter la vue vers POV-Ray... Write the active 3D view with camera and all its content to a POV-Ray file - + Écrire la vue 3D active avec la caméra et tout son contenu dans un fichier au format POV-Ray The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. @@ -260,7 +260,7 @@ Do you want to continue? POV-Ray (*.pov) - + POV-Ray (*.pov) @@ -282,7 +282,7 @@ Do you want to continue? POV-Ray(*.pov) - + POV-Ray (*.pov) @@ -324,39 +324,27 @@ Do you want to continue? POV-Ray not found - + POV-Ray introuvable Please set the path to the POV-Ray executable in the preferences. - + S'il vous plaît, définissez le chemin vers l'exécutable POV-Ray dans les préférences. Please correct the path to the POV-Ray executable in the preferences. - + S'il vous plaît, corrigez le chemin vers l'exécutable POV-Ray dans les préférences. Lux project file missing - + Fichier du projet Lux manquant The Lux project file doesn't exist. - - - - Povray not found - Povray introuvable - - - Please set the path to the povray executable in the preferences. - S'il vous plaît, définissez le chemin vers l'exécutable Povray dans les préférences. - - - Please correct the path to the povray executable in the preferences. - S'il vous plaît, corrigez le chemin vers l'exécutable Povray dans les préférences. + Le fichier de projet Lux n'existe pas. @@ -377,17 +365,17 @@ Do you want to continue? POV-Ray file missing - + Fichier POV-Ray manquant The POV-Ray project file doesn't exist. - + Le fichier de projet POV-Ray n'existe pas. Rendered image (*.bmp) - + Rendu d'image (*.bmp) @@ -426,22 +414,22 @@ Do you want to continue? The path to the POV-Ray executable, if you want to render from FreeCAD - + Le chemin vers l'exécutable de POV-Ray, si vous souhaitez l'utiliser depuis FreeCAD POV-Ray executable: - + Exécutable de POV-Ray : POV-Ray output parameters: - + Paramètres de sortie de POV-Ray : The POV-Ray parameters to be passed to the render. - + Les paramètres POV-Ray à passer au rendu. @@ -463,22 +451,6 @@ Do you want to continue? Render Rendu - - The path to the povray executable, if you want to render from FreeCAD - Le chemin vers l'exécutable de Povray, si vous souhaitez l'utiliser depuis FreeCAD - - - Povray executable: - Exécutable Povray : - - - Povray output parameters: - Paramètres de sortie pour Povray : - - - The povray parameters to be passed to the render. - Les paramètres à passer à Povray. - +P +A diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hr.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hr.qm index aaafb02d76..93e9e010c1 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hr.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hr.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hr.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hr.ts index 67037313f8..dde82b12ba 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hr.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hr.ts @@ -91,12 +91,12 @@ New POV-Ray project - + New POV-Ray project Insert new POV-Ray project into the document - + Insert new POV-Ray project into the document @@ -155,12 +155,12 @@ Export camera to POV-Ray... - + Export camera to POV-Ray... Export the camera positon of the active 3D view in POV-Ray format to a file - + Export the camera positon of the active 3D view in POV-Ray format to a file Export camera to povray... @@ -181,12 +181,12 @@ Export part to POV-Ray... - + Export part to POV-Ray... Write the selected Part (object) as a POV-Ray file - + Write the selected Part (object) as a POV-Ray file Export part to povray... @@ -213,17 +213,18 @@ The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. Do you want to continue? - + The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. +Do you want to continue? Export view to POV-Ray... - + Export view to POV-Ray... Write the active 3D view with camera and all its content to a POV-Ray file - + Write the active 3D view with camera and all its content to a POV-Ray file The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. @@ -262,7 +263,7 @@ Do you want to continue? POV-Ray (*.pov) - + POV-Ray (*.pov) @@ -284,7 +285,7 @@ Do you want to continue? POV-Ray(*.pov) - + POV-Ray(*.pov) @@ -326,39 +327,27 @@ Do you want to continue? POV-Ray not found - + POV-Ray not found Please set the path to the POV-Ray executable in the preferences. - + Please set the path to the POV-Ray executable in the preferences. Please correct the path to the POV-Ray executable in the preferences. - + Please correct the path to the POV-Ray executable in the preferences. Lux project file missing - + Lux project file missing The Lux project file doesn't exist. - - - - Povray not found - Povray not found - - - Please set the path to the povray executable in the preferences. - Please set the path to the povray executable in the preferences. - - - Please correct the path to the povray executable in the preferences. - Please correct the path to the povray executable in the preferences. + The Lux project file doesn't exist. @@ -379,17 +368,17 @@ Do you want to continue? POV-Ray file missing - + POV-Ray file missing The POV-Ray project file doesn't exist. - + The POV-Ray project file doesn't exist. Rendered image (*.bmp) - + Rendered image (*.bmp) @@ -428,22 +417,22 @@ Do you want to continue? The path to the POV-Ray executable, if you want to render from FreeCAD - + The path to the POV-Ray executable, if you want to render from FreeCAD POV-Ray executable: - + POV-Ray executable: POV-Ray output parameters: - + POV-Ray output parameters: The POV-Ray parameters to be passed to the render. - + The POV-Ray parameters to be passed to the render. @@ -465,22 +454,6 @@ Do you want to continue? Render Render - - The path to the povray executable, if you want to render from FreeCAD - The path to the povray executable, if you want to render from FreeCAD - - - Povray executable: - Povray executable: - - - Povray output parameters: - Povray output parameters: - - - The povray parameters to be passed to the render. - The povray parameters to be passed to the render. - +P +A diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.qm index d5aac0674a..cbd2d300f0 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.ts index ac6633f53a..43480a56c8 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_hu.ts @@ -91,12 +91,12 @@ New POV-Ray project - + New POV-Ray project Insert new POV-Ray project into the document - + Insert new POV-Ray project into the document @@ -155,12 +155,12 @@ Export camera to POV-Ray... - + Export camera to POV-Ray... Export the camera positon of the active 3D view in POV-Ray format to a file - + Export the camera positon of the active 3D view in POV-Ray format to a file Export camera to povray... @@ -181,12 +181,12 @@ Export part to POV-Ray... - + Export part to POV-Ray... Write the selected Part (object) as a POV-Ray file - + Write the selected Part (object) as a POV-Ray file Export part to povray... @@ -213,17 +213,18 @@ The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. Do you want to continue? - + The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. +Do you want to continue? Export view to POV-Ray... - + Export view to POV-Ray... Write the active 3D view with camera and all its content to a POV-Ray file - + Write the active 3D view with camera and all its content to a POV-Ray file The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. @@ -261,7 +262,7 @@ Do you want to continue? POV-Ray (*.pov) - + POV-Ray (*.pov) @@ -283,7 +284,7 @@ Do you want to continue? POV-Ray(*.pov) - + POV-Ray(*.pov) @@ -325,39 +326,27 @@ Do you want to continue? POV-Ray not found - + POV-Ray not found Please set the path to the POV-Ray executable in the preferences. - + Please set the path to the POV-Ray executable in the preferences. Please correct the path to the POV-Ray executable in the preferences. - + Please correct the path to the POV-Ray executable in the preferences. Lux project file missing - + Lux project file missing The Lux project file doesn't exist. - - - - Povray not found - Povray not found - - - Please set the path to the povray executable in the preferences. - Please set the path to the povray executable in the preferences. - - - Please correct the path to the povray executable in the preferences. - Please correct the path to the povray executable in the preferences. + The Lux project file doesn't exist. @@ -378,17 +367,17 @@ Do you want to continue? POV-Ray file missing - + POV-Ray file missing The POV-Ray project file doesn't exist. - + The POV-Ray project file doesn't exist. Rendered image (*.bmp) - + Rendered image (*.bmp) @@ -427,22 +416,22 @@ Do you want to continue? The path to the POV-Ray executable, if you want to render from FreeCAD - + The path to the POV-Ray executable, if you want to render from FreeCAD POV-Ray executable: - + POV-Ray executable: POV-Ray output parameters: - + POV-Ray output parameters: The POV-Ray parameters to be passed to the render. - + The POV-Ray parameters to be passed to the render. @@ -464,22 +453,6 @@ Do you want to continue? Render Render - - The path to the povray executable, if you want to render from FreeCAD - The path to the povray executable, if you want to render from FreeCAD - - - Povray executable: - Povray executable: - - - Povray output parameters: - Povray output parameters: - - - The povray parameters to be passed to the render. - The povray parameters to be passed to the render. - +P +A diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_it.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_it.qm index 41a7c0979f..2e95c92111 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_it.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_it.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_it.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_it.ts index b34b87f9e1..19411b3050 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_it.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_it.ts @@ -91,12 +91,12 @@ New POV-Ray project - + Nuovo progetto POV-Ray Insert new POV-Ray project into the document - + Inserisci il nuovo progetto POV-Ray nel documento @@ -155,12 +155,12 @@ Export camera to POV-Ray... - + Esporta la camera in POV-Ray... Export the camera positon of the active 3D view in POV-Ray format to a file - + Esporta la posizione della telecamera della vista 3D attiva in un file in formato POV-Ray Export camera to povray... @@ -181,12 +181,12 @@ Export part to POV-Ray... - + Esporta la parte in POV-Ray... Write the selected Part (object) as a POV-Ray file - + Scrive la parte selezionata (oggetto) in un file POV-Ray Export part to povray... @@ -213,17 +213,17 @@ The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. Do you want to continue? - + La vista della camera corrente non è in prospettiva e quindi l'immagine POV-Ray risultante potrebbe apparire diversa da quella attesa. Si desidera continuare? Export view to POV-Ray... - + Esporta la vista in POV-Ray... Write the active 3D view with camera and all its content to a POV-Ray file - + Scrive in un file POV-Ray la vista attiva 3D, con la camera e tutto il suo contenuto The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. @@ -261,7 +261,7 @@ Do you want to continue? POV-Ray (*.pov) - + POV-Ray (*.pov) @@ -283,7 +283,7 @@ Do you want to continue? POV-Ray(*.pov) - + POV-Ray(*.pov) @@ -325,39 +325,27 @@ Do you want to continue? POV-Ray not found - + POV-Ray non trovato Please set the path to the POV-Ray executable in the preferences. - + Prego impostare il percorso dell'eseguibile di POV-Ray nelle preferenze. Please correct the path to the POV-Ray executable in the preferences. - + Si prega di correggere il percorso dell'eseguibile di POV-Ray nelle preferenze. Lux project file missing - + Manca il file del progetto Lux The Lux project file doesn't exist. - - - - Povray not found - Povray non trovato - - - Please set the path to the povray executable in the preferences. - Impostare il percorso dell'eseguibile povray nelle preferenze. - - - Please correct the path to the povray executable in the preferences. - Correggere il percorso dell'eseguibile povray nelle preferenze. + Il file del progetto Lux non esiste. @@ -378,17 +366,17 @@ Do you want to continue? POV-Ray file missing - + il file POV-Ray è mancante The POV-Ray project file doesn't exist. - + Il file del progetto POV-Ray non esiste. Rendered image (*.bmp) - + Immagine renderizzata (*. bmp) @@ -427,22 +415,22 @@ Do you want to continue? The path to the POV-Ray executable, if you want to render from FreeCAD - + Il percorso dell'eseguibile di POV-Ray, se si desidera eseguire il rendering da FreeCAD POV-Ray executable: - + Eseguibile di POV-Ray: POV-Ray output parameters: - + Parametri di output di POV-Ray: The POV-Ray parameters to be passed to the render. - + I parametri POV-Ray da passare per il rendering. @@ -464,22 +452,6 @@ Do you want to continue? Render Render - - The path to the povray executable, if you want to render from FreeCAD - Il percorso dell'eseguibile povray, se si desidera eseguire il rendering da FreeCAD - - - Povray executable: - Eseguibile Povray: - - - Povray output parameters: - Parametri di output Povray: - - - The povray parameters to be passed to the render. - I parametri da passare per il rendering povray. - +P +A diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ja.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ja.qm index 0a09afe666..009b86a315 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ja.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ja.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ja.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ja.ts index ac06cac1e4..12db75b07b 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ja.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ja.ts @@ -16,7 +16,7 @@ Export a Raytracing project to a file - Export a Raytracing project to a file + レイトレーシングプロジェクトをファイルへエクスポート Export the Povray project file @@ -38,17 +38,17 @@ Insert new Luxrender project into the document - Insert new Luxrender project into the document + ドキュメントに新しいLuxrenderプロジェクトを挿入 No template - No template + テンプレートがありません No template available - No template available + 利用可能なテンプレートがありません @@ -66,7 +66,7 @@ Insert a new part object into a Raytracing project - Insert a new part object into a Raytracing project + レイトレーシングプロジェクトに新しいパートオブジェクトを挿入 Insert a new part object into a Povray project @@ -91,22 +91,22 @@ New POV-Ray project - + 新しいPOV-Rayプロジェクト Insert new POV-Ray project into the document - + ドキュメントに新しいPOV-Rayプロジェクトを挿入 No template - No template + テンプレートがありません No template available - No template available + 利用可能なテンプレートがありません @@ -124,7 +124,7 @@ Renders the current raytracing project with an external renderer - Renders the current raytracing project with an external renderer + 外部のレンダラーを使って現在のレイトレーシングプロジェクトをレンダリング @@ -137,12 +137,12 @@ &Reset Camera - &Reset Camera + カメラをリセット (&R) Sets the camera of the selected Raytracing project to match the current view - Sets the camera of the selected Raytracing project to match the current view + 選択されているレイトレーシングプロジェクトのカメラを現在のビューに一致させます @@ -155,12 +155,12 @@ Export camera to POV-Ray... - + カメラをPOV-Rayへエクスポート... Export the camera positon of the active 3D view in POV-Ray format to a file - + 現在の3 D ビューでのカメラ位置をPOV-Ray フォーマットのファイルにエクスポートします。 Export camera to povray... @@ -181,12 +181,12 @@ Export part to POV-Ray... - + パーツをPOV-Rayへエクスポート... Write the selected Part (object) as a POV-Ray file - + 選択した部品 (オブジェクト) をPOV-Ray ファイルとして書き出す Export part to povray... @@ -213,17 +213,18 @@ The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. Do you want to continue? - + 現在のビューカメラは透視投影ではありませんので、従ってこの後のPOV-Ray画像結果は意図したものと異なる可能性があります。 +続行しますか？ Export view to POV-Ray... - + ビューをPOV-Rayへエクスポート... Write the active 3D view with camera and all its content to a POV-Ray file - + 現在の3 D ビューにおけるカメラと全てのコンテンツをPOV-Ray ファイルに書き込む The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. @@ -247,8 +248,8 @@ Do you want to continue? The current view camera is not perspective and thus the result of the luxrender image later might look different to what you expect. Do you want to continue? - The current view camera is not perspective and thus the result of the luxrender image later might look different to what you expect. -Do you want to continue? + 現在のビューカメラは透視投影ではありません。従ってこの後のLuxRender画像結果は意図したものと異なる可能性があります。 +続行しますか？ @@ -261,7 +262,7 @@ Do you want to continue? POV-Ray (*.pov) - + POV-Ray (*.pov) @@ -283,7 +284,7 @@ Do you want to continue? POV-Ray(*.pov) - + POV-Ray(*.pov) @@ -302,98 +303,86 @@ Do you want to continue? No Raytracing project to insert - No Raytracing project to insert + 挿入するレイトレーシングプロジェクトがありません。 Create a Raytracing project to insert a view. - Create a Raytracing project to insert a view. + ビューを挿入するレイトレーシングプロジェクトを作成 Select a Raytracing project to insert the view. - Select a Raytracing project to insert the view. + ビューを挿入するレイトレーシングプロジェクトを選択 Select one Raytracing project object. - Select one Raytracing project object. + レイトレーシングプロジェクトオブジェクトを 1 つ選択してください。 POV-Ray not found - + POV-Ray が見つかりません Please set the path to the POV-Ray executable in the preferences. - + プリファレンスでPOV-Ray実行ファイルのパスを設定してください。 Please correct the path to the POV-Ray executable in the preferences. - + フリファレンスで、POV-Ray実行ファイルのパスを修正してください。 Lux project file missing - + Luxプロジェクトファイルが見つかりません The Lux project file doesn't exist. - - - - Povray not found - Povray が見つかりません - - - Please set the path to the povray executable in the preferences. - Please set the path to the povray executable in the preferences. - - - Please correct the path to the povray executable in the preferences. - Please correct the path to the povray executable in the preferences. + Luxプロジェクトファイルがありません。 Luxrender not found - Luxrender not found + Luxrender が見つかりません Please set the path to the luxrender or luxconsole executable in the preferences. - Please set the path to the luxrender or luxconsole executable in the preferences. + 必要に応じてLuxRenderまたはLuxconsoleの実行ファイルのパスを設定してください。 Please correct the path to the luxrender or luxconsole executable in the preferences. - Please correct the path to the luxrender or luxconsole executable in the preferences. + 必要に応じてLuxRenderまたはLuxconsoleの実行ファイルのパスを修正してください。 POV-Ray file missing - + POV-Rayファイルが見つかりません The POV-Ray project file doesn't exist. - + POV-Ray プロジェクトファイルがありません。 Rendered image (*.bmp) - + レンダリング画像 (*.bmp) Rendered image (*.png) - Rendered image (*.png) + レンダリングされた画像 (*.png) @@ -427,22 +416,22 @@ Do you want to continue? The path to the POV-Ray executable, if you want to render from FreeCAD - + FreeCADからレンダリングしたい場合の、POV-Ray実行ファイルのパス POV-Ray executable: - + POV-Ray実行ファイル: POV-Ray output parameters: - + POV-Ray出力パラメーター: The POV-Ray parameters to be passed to the render. - + レンダーに渡されるPOV-Rayパラメーター。 @@ -462,23 +451,7 @@ Do you want to continue? Render - Render - - - The path to the povray executable, if you want to render from FreeCAD - The path to the povray executable, if you want to render from FreeCAD - - - Povray executable: - Povray executable: - - - Povray output parameters: - Povray 出力パラメーター: - - - The povray parameters to be passed to the render. - レンダリングに渡される povray パラメーター。 + レンダー @@ -488,17 +461,17 @@ Do you want to continue? +W: - +W: + +W:  The width of the rendered image - The width of the rendered image + レンダリング・イメージの幅 +H : - +H : +  +H :  @@ -513,7 +486,7 @@ Do you want to continue? The path to the luxrender (or luxconsole) executable - The path to the luxrender (or luxconsole) executable + LuxRender(またはluxconsole)実行ファイルのパス @@ -525,7 +498,7 @@ Do you want to continue? Used by utility tools - Used by utility tools + ユーティリティ ツールで使用 @@ -563,7 +536,7 @@ Do you want to continue? Edit LuxRender project - Edit LuxRender project + LuxRender プロジェクトの編集 @@ -573,7 +546,7 @@ Do you want to continue? Select a LuxRender template - Select a LuxRender template + LuxRender テンプレートを選択 diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_nl.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_nl.qm index 31a125beb4..a119ea1808 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_nl.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_nl.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_nl.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_nl.ts index 73d1f6102b..5bcb59049b 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_nl.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_nl.ts @@ -16,7 +16,7 @@ Export a Raytracing project to a file - Export a Raytracing project to a file + Een raytracing-project exporteren naar een bestand Export the Povray project file @@ -33,22 +33,22 @@ New Luxrender project - New Luxrender project + Nieuw Luxrender-project Insert new Luxrender project into the document - Insert new Luxrender project into the document + Een nieuw LuxRender-project invoegen in het document No template - No template + Geen sjabloon No template available - No template available + Geen sjabloon beschikbaar @@ -91,22 +91,22 @@ New POV-Ray project - + Nieuw POV-Ray project Insert new POV-Ray project into the document - + Insert new POV-Ray project into the document No template - No template + Geen sjabloon No template available - No template available + Geen sjabloon beschikbaar @@ -119,7 +119,7 @@ &Render - &Render + &Renderen @@ -155,12 +155,12 @@ Export camera to POV-Ray... - + Export camera to POV-Ray... Export the camera positon of the active 3D view in POV-Ray format to a file - + Export the camera positon of the active 3D view in POV-Ray format to a file Export camera to povray... @@ -181,12 +181,12 @@ Export part to POV-Ray... - + Export part to POV-Ray... Write the selected Part (object) as a POV-Ray file - + Write the selected Part (object) as a POV-Ray file Export part to povray... @@ -213,17 +213,18 @@ The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. Do you want to continue? - + The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. +Do you want to continue? Export view to POV-Ray... - + Export view to POV-Ray... Write the active 3D view with camera and all its content to a POV-Ray file - + Write the active 3D view with camera and all its content to a POV-Ray file The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. @@ -262,7 +263,7 @@ Do you want to continue? POV-Ray (*.pov) - + POV-Ray (*.pov) @@ -284,7 +285,7 @@ Do you want to continue? POV-Ray(*.pov) - + POV-Ray(*.pov) @@ -326,45 +327,33 @@ Do you want to continue? POV-Ray not found - + POV-Ray not found Please set the path to the POV-Ray executable in the preferences. - + Please set the path to the POV-Ray executable in the preferences. Please correct the path to the POV-Ray executable in the preferences. - + Please correct the path to the POV-Ray executable in the preferences. Lux project file missing - + Lux project file missing The Lux project file doesn't exist. - - - - Povray not found - Povray not found - - - Please set the path to the povray executable in the preferences. - Please set the path to the povray executable in the preferences. - - - Please correct the path to the povray executable in the preferences. - Please correct the path to the povray executable in the preferences. + The Lux project file doesn't exist. Luxrender not found - Luxrender not found + LuxRender niet gevonden @@ -379,17 +368,17 @@ Do you want to continue? POV-Ray file missing - + POV-Ray file missing The POV-Ray project file doesn't exist. - + The POV-Ray project file doesn't exist. Rendered image (*.bmp) - + Rendered image (*.bmp) @@ -428,22 +417,22 @@ Do you want to continue? The path to the POV-Ray executable, if you want to render from FreeCAD - + The path to the POV-Ray executable, if you want to render from FreeCAD POV-Ray executable: - + POV-Ray executable: POV-Ray output parameters: - + POV-Ray output parameters: The POV-Ray parameters to be passed to the render. - + The POV-Ray parameters to be passed to the render. @@ -463,23 +452,7 @@ Do you want to continue? Render - Render - - - The path to the povray executable, if you want to render from FreeCAD - The path to the povray executable, if you want to render from FreeCAD - - - Povray executable: - Povray executable: - - - Povray output parameters: - Povray output parameters: - - - The povray parameters to be passed to the render. - The povray parameters to be passed to the render. + Renderen @@ -564,17 +537,17 @@ Do you want to continue? Edit LuxRender project - Edit LuxRender project + LuxRender-project bewerken LuxRender template - LuxRender template + LuxRender-sjabloon Select a LuxRender template - Select a LuxRender template + Selecteer een LuxRender-sjabloon @@ -587,7 +560,7 @@ Do you want to continue? Povray template - Povray template + POV-Ray-sjabloon diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_no.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_no.qm index bd7f6427f2..f6d149eec5 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_no.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_no.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_no.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_no.ts index 1197886ad8..1ffb27a280 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_no.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_no.ts @@ -91,12 +91,12 @@ New POV-Ray project - + New POV-Ray project Insert new POV-Ray project into the document - + Insert new POV-Ray project into the document @@ -155,12 +155,12 @@ Export camera to POV-Ray... - + Export camera to POV-Ray... Export the camera positon of the active 3D view in POV-Ray format to a file - + Export the camera positon of the active 3D view in POV-Ray format to a file Export camera to povray... @@ -181,12 +181,12 @@ Export part to POV-Ray... - + Export part to POV-Ray... Write the selected Part (object) as a POV-Ray file - + Write the selected Part (object) as a POV-Ray file Export part to povray... @@ -213,17 +213,18 @@ The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. Do you want to continue? - + The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. +Do you want to continue? Export view to POV-Ray... - + Export view to POV-Ray... Write the active 3D view with camera and all its content to a POV-Ray file - + Write the active 3D view with camera and all its content to a POV-Ray file The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. @@ -261,7 +262,7 @@ Do you want to continue? POV-Ray (*.pov) - + POV-Ray (*.pov) @@ -283,7 +284,7 @@ Do you want to continue? POV-Ray(*.pov) - + POV-Ray(*.pov) @@ -325,39 +326,27 @@ Do you want to continue? POV-Ray not found - + POV-Ray not found Please set the path to the POV-Ray executable in the preferences. - + Please set the path to the POV-Ray executable in the preferences. Please correct the path to the POV-Ray executable in the preferences. - + Please correct the path to the POV-Ray executable in the preferences. Lux project file missing - + Lux project file missing The Lux project file doesn't exist. - - - - Povray not found - Povray not found - - - Please set the path to the povray executable in the preferences. - Please set the path to the povray executable in the preferences. - - - Please correct the path to the povray executable in the preferences. - Please correct the path to the povray executable in the preferences. + The Lux project file doesn't exist. @@ -378,17 +367,17 @@ Do you want to continue? POV-Ray file missing - + POV-Ray file missing The POV-Ray project file doesn't exist. - + The POV-Ray project file doesn't exist. Rendered image (*.bmp) - + Rendered image (*.bmp) @@ -427,22 +416,22 @@ Do you want to continue? The path to the POV-Ray executable, if you want to render from FreeCAD - + The path to the POV-Ray executable, if you want to render from FreeCAD POV-Ray executable: - + POV-Ray executable: POV-Ray output parameters: - + POV-Ray output parameters: The POV-Ray parameters to be passed to the render. - + The POV-Ray parameters to be passed to the render. @@ -464,22 +453,6 @@ Do you want to continue? Render Render - - The path to the povray executable, if you want to render from FreeCAD - The path to the povray executable, if you want to render from FreeCAD - - - Povray executable: - Povray executable: - - - Povray output parameters: - Povray output parameters: - - - The povray parameters to be passed to the render. - The povray parameters to be passed to the render. - +P +A diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pl.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pl.qm index 4f32ca8a4e..a2e2db5ddd 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pl.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pl.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pl.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pl.ts index 86721f5bdd..1d6b93b450 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pl.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pl.ts @@ -16,7 +16,7 @@ Export a Raytracing project to a file - Export a Raytracing project to a file + Eksport projektu Raytracing do pliku Export the Povray project file @@ -33,22 +33,22 @@ New Luxrender project - New Luxrender project + Nowy projekt Luxrendera Insert new Luxrender project into the document - Insert new Luxrender project into the document + Wstaw nowy projekt Luxrendera do projektu No template - No template + Brak szablonu No template available - No template available + Szablon niedostępny @@ -66,7 +66,7 @@ Insert a new part object into a Raytracing project - Insert a new part object into a Raytracing project + Wstaw nową część do projektu Raytracing Insert a new part object into a Povray project @@ -91,22 +91,22 @@ New POV-Ray project - + New POV-Ray project Insert new POV-Ray project into the document - + Insert new POV-Ray project into the document No template - No template + Brak szablonu No template available - No template available + Szablon niedostępny @@ -119,12 +119,12 @@ &Render - &Render + & Renderuj Renders the current raytracing project with an external renderer - Renders the current raytracing project with an external renderer + Renderuje obecny projekt raytracing za pomocą zewnętrznego renderera @@ -137,12 +137,12 @@ &Reset Camera - &Reset Camera + &Zresetuj kamerę Sets the camera of the selected Raytracing project to match the current view - Sets the camera of the selected Raytracing project to match the current view + Ustawia widok kamery z wybranego projektu Raytracing i dopasowuje go do bieżącego widoku @@ -155,12 +155,12 @@ Export camera to POV-Ray... - + Export camera to POV-Ray... Export the camera positon of the active 3D view in POV-Ray format to a file - + Export the camera positon of the active 3D view in POV-Ray format to a file Export camera to povray... @@ -181,12 +181,12 @@ Export part to POV-Ray... - + Export part to POV-Ray... Write the selected Part (object) as a POV-Ray file - + Write the selected Part (object) as a POV-Ray file Export part to povray... @@ -213,17 +213,18 @@ The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. Do you want to continue? - + The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. +Do you want to continue? Export view to POV-Ray... - + Export view to POV-Ray... Write the active 3D view with camera and all its content to a POV-Ray file - + Write the active 3D view with camera and all its content to a POV-Ray file The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. @@ -247,8 +248,7 @@ Do you want to continue? The current view camera is not perspective and thus the result of the luxrender image later might look different to what you expect. Do you want to continue? - The current view camera is not perspective and thus the result of the luxrender image later might look different to what you expect. -Do you want to continue? + Bieżący widok kamery nie jest perspektywą i dla tego wynik obrazu luxrender, może później wyglądać inaczej do tego, czego oczekiwałeś. Czy chcesz kontynuować? @@ -261,7 +261,7 @@ Do you want to continue? POV-Ray (*.pov) - + POV-Ray (*.pov) @@ -278,12 +278,12 @@ Do you want to continue? Export page - Wyślij stronę + Eksportuj stronę POV-Ray(*.pov) - + POV-Ray(*.pov) @@ -296,109 +296,97 @@ Do you want to continue? Select a Part object. - Wybierz stronę. + Wybierz obiekt Części. No Raytracing project to insert - No Raytracing project to insert + Brak projektu Raytracing do wstawienia Create a Raytracing project to insert a view. - Create a Raytracing project to insert a view. + Tworzy nowy projekt Raytracing aby wstawić widok. Select a Raytracing project to insert the view. - Select a Raytracing project to insert the view. + Wybierz projekt Raytracing żeby wstawić widok. Select one Raytracing project object. - Select one Raytracing project object. + Wybierz jeden obiekt projektu Raytracing. POV-Ray not found - + POV-Ray not found Please set the path to the POV-Ray executable in the preferences. - + Please set the path to the POV-Ray executable in the preferences. Please correct the path to the POV-Ray executable in the preferences. - + Please correct the path to the POV-Ray executable in the preferences. Lux project file missing - + Lux project file missing The Lux project file doesn't exist. - - - - Povray not found - Povray not found - - - Please set the path to the povray executable in the preferences. - Please set the path to the povray executable in the preferences. - - - Please correct the path to the povray executable in the preferences. - Please correct the path to the povray executable in the preferences. + The Lux project file doesn't exist. Luxrender not found - Luxrender not found + Nie znaleziono Luxrender Please set the path to the luxrender or luxconsole executable in the preferences. - Please set the path to the luxrender or luxconsole executable in the preferences. + Ustaw ścieżkę do pliku wykonywalnego luxrendera albo luxkonsoli w ustawieniach preferencji. Please correct the path to the luxrender or luxconsole executable in the preferences. - Please correct the path to the luxrender or luxconsole executable in the preferences. + Popraw ścieżkę do pliku wykonywalnego luxrendera albo luxkonsoli w ustawieniach preferencji. POV-Ray file missing - + POV-Ray file missing The POV-Ray project file doesn't exist. - + The POV-Ray project file doesn't exist. Rendered image (*.bmp) - + Rendered image (*.bmp) Rendered image (*.png) - Rendered image (*.png) + Renderowanie obrazu (*.png) Rendered image - Rendered image + Renderowanie obrazu No Povray project to insert @@ -427,22 +415,22 @@ Do you want to continue? The path to the POV-Ray executable, if you want to render from FreeCAD - + The path to the POV-Ray executable, if you want to render from FreeCAD POV-Ray executable: - + POV-Ray executable: POV-Ray output parameters: - + POV-Ray output parameters: The POV-Ray parameters to be passed to the render. - + The POV-Ray parameters to be passed to the render. @@ -462,23 +450,7 @@ Do you want to continue? Render - Render - - - The path to the povray executable, if you want to render from FreeCAD - The path to the povray executable, if you want to render from FreeCAD - - - Povray executable: - Povray executable: - - - Povray output parameters: - Povray output parameters: - - - The povray parameters to be passed to the render. - The povray parameters to be passed to the render. + Renderowanie @@ -493,27 +465,27 @@ Do you want to continue? The width of the rendered image - The width of the rendered image + Szerokość wyrenderowanego obrazu +H : - +H : + +H: The height of the rendered image - The height of the rendered image + Wysokość renderowanego obrazu Luxrender executable: - Luxrender executable: + Plik wykonywalny luxrendera: The path to the luxrender (or luxconsole) executable - The path to the luxrender (or luxconsole) executable + Ścieżka do pliku wykonywalnego luxrendera (albo luxkonsoli) @@ -525,7 +497,7 @@ Do you want to continue? Used by utility tools - Used by utility tools + Używany przez narzędzia @@ -563,17 +535,17 @@ Do you want to continue? Edit LuxRender project - Edit LuxRender project + Edycja projektu LuxRender LuxRender template - LuxRender template + Szablon LuxRender Select a LuxRender template - Select a LuxRender template + Wybierz szablon LuxRender @@ -581,17 +553,17 @@ Do you want to continue? Edit Povray project - Edit Povray project + Edycja projektu Povray Povray template - Povray template + Szablon POV Ray Select a Povray template - Select a Povray template + Wybierz szablon POV Ray diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-BR.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-BR.qm index 9fb9a82fab..7a75503138 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-BR.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-BR.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-BR.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-BR.ts index 070126a766..7f607a2ff5 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-BR.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-BR.ts @@ -91,12 +91,12 @@ New POV-Ray project - + Novo projeto do POV-Ray Insert new POV-Ray project into the document - + Inserir um novo projeto POV-Ray no documento @@ -155,12 +155,12 @@ Export camera to POV-Ray... - + Exportar a câmera para POV-Ray... Export the camera positon of the active 3D view in POV-Ray format to a file - + Exportar a posição da câmera da vista 3D atual para um arquivo no formato do POV-Ray Export camera to povray... @@ -181,12 +181,12 @@ Export part to POV-Ray... - + Exportar peça para o POV-Ray... Write the selected Part (object) as a POV-Ray file - + Exporta a peça selecionada (objeto) para um arquivo POV-Ray Export part to povray... @@ -213,17 +213,17 @@ The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. Do you want to continue? - + A câmera da vista 3D atual não é perspectiva, portanto o resultado da imagem produzida pelo POV-Ray pode ficar diferente do que você espera. Deseja continuar? Export view to POV-Ray... - + Exportar vista para POV-Ray... Write the active 3D view with camera and all its content to a POV-Ray file - + Gravar a vista 3D atual com câmera e todo seu conteúdo em um arquivo do POV-Ray The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. @@ -260,7 +260,7 @@ Do you want to continue? POV-Ray (*.pov) - + POV-Ray (*.pov) @@ -282,7 +282,7 @@ Do you want to continue? POV-Ray(*.pov) - + POV-Ray(*.pov) @@ -324,39 +324,27 @@ Do you want to continue? POV-Ray not found - + POV-Ray não encontrado Please set the path to the POV-Ray executable in the preferences. - + Por favor, defina o caminho para o executável do POV-Ray nas preferências. Please correct the path to the POV-Ray executable in the preferences. - + Por favor, corrija o caminho para o executável do POV-Ray nas preferências. Lux project file missing - + Arquivo de projeto Lux faltando The Lux project file doesn't exist. - - - - Povray not found - Povray não encontrado - - - Please set the path to the povray executable in the preferences. - Por favor, defina o caminho para o executável do povray nas preferências. - - - Please correct the path to the povray executable in the preferences. - Por favor, corrija o caminho para o executável do povray nas preferências. + O arquivo de projeto Lux não existe. @@ -377,17 +365,17 @@ Do you want to continue? POV-Ray file missing - + Arquivo POV-Ray faltando The POV-Ray project file doesn't exist. - + O arquivo de projeto POV-Ray não existe. Rendered image (*.bmp) - + Imagem renderizada (*. bmp) @@ -426,22 +414,22 @@ Do you want to continue? The path to the POV-Ray executable, if you want to render from FreeCAD - + O caminho para o executável do POV-Ray, se você deseja renderizar a partir do FreeCAD POV-Ray executable: - + Executável do POV-Ray: POV-Ray output parameters: - + Parâmetros de saída do POV-Ray: The POV-Ray parameters to be passed to the render. - + Os parâmetros do POV-Ray a serem passados para o render. @@ -463,22 +451,6 @@ Do you want to continue? Render Renderizador - - The path to the povray executable, if you want to render from FreeCAD - O caminho para o executável do povray, se você deseja renderizar a partir do FreeCAD - - - Povray executable: - Povray executável: - - - Povray output parameters: - Parâmetros de saída do Povray: - - - The povray parameters to be passed to the render. - Os parâmetros de render a serem passados para o povray. - +P +A diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-PT.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-PT.qm index 49410b5a48..0eeba9f9fa 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-PT.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-PT.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-PT.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-PT.ts index a6ee082e31..0a31196c32 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-PT.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_pt-PT.ts @@ -16,7 +16,7 @@ Export a Raytracing project to a file - Export a Raytracing project to a file + Exportar um projeto de Raytracing para um ficheiro Export the Povray project file @@ -33,22 +33,22 @@ New Luxrender project - New Luxrender project + Novo projeto Luxrender Insert new Luxrender project into the document - Insert new Luxrender project into the document + Inserir novo projeto Luxrender no documento No template - No template + Nenhum modelo No template available - No template available + Nenhum modelo disponível @@ -66,7 +66,7 @@ Insert a new part object into a Raytracing project - Insert a new part object into a Raytracing project + Inserir um novo objeto de peça num projeto de Raytracing Insert a new part object into a Povray project @@ -91,22 +91,22 @@ New POV-Ray project - + New POV-Ray project Insert new POV-Ray project into the document - + Insert new POV-Ray project into the document No template - No template + Nenhum modelo No template available - No template available + Nenhum modelo disponível @@ -119,12 +119,12 @@ &Render - &Render + &Processador Renders the current raytracing project with an external renderer - Renders the current raytracing project with an external renderer + Processa o atual projeto de raytracing com um processador externo @@ -137,12 +137,12 @@ &Reset Camera - &Reset Camera + & Redefinir a câmara Sets the camera of the selected Raytracing project to match the current view - Sets the camera of the selected Raytracing project to match the current view + Ajusta a câmara do projeto Raytracing selecionado para concordar com o modo de exibição atual @@ -155,12 +155,12 @@ Export camera to POV-Ray... - + Export camera to POV-Ray... Export the camera positon of the active 3D view in POV-Ray format to a file - + Export the camera positon of the active 3D view in POV-Ray format to a file Export camera to povray... @@ -181,12 +181,12 @@ Export part to POV-Ray... - + Export part to POV-Ray... Write the selected Part (object) as a POV-Ray file - + Write the selected Part (object) as a POV-Ray file Export part to povray... @@ -194,7 +194,7 @@ Write the selected Part (object) as a povray file - Write the selected Part (object) as a povray file + Escrever a peça selecionada (objeto) como um ficheiro povray @@ -205,7 +205,7 @@ No perspective camera - No perspective camera + Sem câmara de perspetiva @@ -213,23 +213,23 @@ The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. Do you want to continue? - + The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. +Do you want to continue? Export view to POV-Ray... - + Export view to POV-Ray... Write the active 3D view with camera and all its content to a POV-Ray file - + Write the active 3D view with camera and all its content to a POV-Ray file The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. Do you want to continue? - The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. -Do you want to continue? + A câmara do modo de exibição atual não está em perspectiva, e assim o resultado da imagem povray mais tarde pode parecer diferente do que espera. Quer continuar? @@ -248,8 +248,7 @@ Do you want to continue? The current view camera is not perspective and thus the result of the luxrender image later might look different to what you expect. Do you want to continue? - The current view camera is not perspective and thus the result of the luxrender image later might look different to what you expect. -Do you want to continue? + A câmara do modo de exibição atual não está em perspectiva, e assim o resultado da imagem luxrender mais tarde pode parecer diferente do que espera. Quer continuar? @@ -262,7 +261,7 @@ Do you want to continue? POV-Ray (*.pov) - + POV-Ray (*.pov) @@ -284,7 +283,7 @@ Do you want to continue? POV-Ray(*.pov) - + POV-Ray(*.pov) @@ -303,103 +302,91 @@ Do you want to continue? No Raytracing project to insert - No Raytracing project to insert + Nenhum projeto de Raytracing para inserir Create a Raytracing project to insert a view. - Create a Raytracing project to insert a view. + Crie um projeto de Raytracing para inserir uma vista. Select a Raytracing project to insert the view. - Select a Raytracing project to insert the view. + Selecione um projeto de Raytracing para inserir a vista. Select one Raytracing project object. - Select one Raytracing project object. + Selecione um objeto de projeto de Raytracing. POV-Ray not found - + POV-Ray not found Please set the path to the POV-Ray executable in the preferences. - + Please set the path to the POV-Ray executable in the preferences. Please correct the path to the POV-Ray executable in the preferences. - + Please correct the path to the POV-Ray executable in the preferences. Lux project file missing - + Lux project file missing The Lux project file doesn't exist. - - - - Povray not found - Povray not found - - - Please set the path to the povray executable in the preferences. - Please set the path to the povray executable in the preferences. - - - Please correct the path to the povray executable in the preferences. - Please correct the path to the povray executable in the preferences. + The Lux project file doesn't exist. Luxrender not found - Luxrender not found + Luxrender não encontrado Please set the path to the luxrender or luxconsole executable in the preferences. - Please set the path to the luxrender or luxconsole executable in the preferences. + Por favor, defina o caminho para o executável luxrender ou luxconsole nas preferências. Please correct the path to the luxrender or luxconsole executable in the preferences. - Please correct the path to the luxrender or luxconsole executable in the preferences. + Por favor, corrija o caminho para o executável luxrender ou luxconsole nas preferências. POV-Ray file missing - + POV-Ray file missing The POV-Ray project file doesn't exist. - + The POV-Ray project file doesn't exist. Rendered image (*.bmp) - + Rendered image (*.bmp) Rendered image (*.png) - Rendered image (*.png) + Imagem processada (*.png) Rendered image - Rendered image + Imagem processada No Povray project to insert @@ -428,22 +415,22 @@ Do you want to continue? The path to the POV-Ray executable, if you want to render from FreeCAD - + The path to the POV-Ray executable, if you want to render from FreeCAD POV-Ray executable: - + POV-Ray executable: POV-Ray output parameters: - + POV-Ray output parameters: The POV-Ray parameters to be passed to the render. - + The POV-Ray parameters to be passed to the render. @@ -463,23 +450,7 @@ Do you want to continue? Render - Render - - - The path to the povray executable, if you want to render from FreeCAD - The path to the povray executable, if you want to render from FreeCAD - - - Povray executable: - Povray executable: - - - Povray output parameters: - Povray output parameters: - - - The povray parameters to be passed to the render. - The povray parameters to be passed to the render. + Processador @@ -494,7 +465,7 @@ Do you want to continue? The width of the rendered image - The width of the rendered image + A largura da imagem processada @@ -504,17 +475,17 @@ Do you want to continue? The height of the rendered image - The height of the rendered image + A altura da imagem processada Luxrender executable: - Luxrender executable: + Executavél Luxrender: The path to the luxrender (or luxconsole) executable - The path to the luxrender (or luxconsole) executable + O caminho para o executável do luxrender (ou luxconsole) @@ -526,7 +497,7 @@ Do you want to continue? Used by utility tools - Used by utility tools + Usado pelas ferramentas utilitárias @@ -564,17 +535,17 @@ Do you want to continue? Edit LuxRender project - Edit LuxRender project + Editar o projeto LuxRender LuxRender template - LuxRender template + Modelo LuxRender Select a LuxRender template - Select a LuxRender template + Selecione modelo povray @@ -582,17 +553,17 @@ Do you want to continue? Edit Povray project - Edit Povray project + Editar projeto Povray Povray template - Povray template + Modelo povray Select a Povray template - Select a Povray template + Selecione um modelo povray diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ro.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ro.qm index 8cc13c6550..8dba3d4313 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ro.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ro.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ro.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ro.ts index 218c805a64..5211b971b2 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ro.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ro.ts @@ -91,12 +91,12 @@ New POV-Ray project - + New POV-Ray project Insert new POV-Ray project into the document - + Insert new POV-Ray project into the document @@ -155,12 +155,12 @@ Export camera to POV-Ray... - + Export camera to POV-Ray... Export the camera positon of the active 3D view in POV-Ray format to a file - + Export the camera positon of the active 3D view in POV-Ray format to a file Export camera to povray... @@ -181,12 +181,12 @@ Export part to POV-Ray... - + Export part to POV-Ray... Write the selected Part (object) as a POV-Ray file - + Write the selected Part (object) as a POV-Ray file Export part to povray... @@ -213,17 +213,18 @@ The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. Do you want to continue? - + The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. +Do you want to continue? Export view to POV-Ray... - + Export view to POV-Ray... Write the active 3D view with camera and all its content to a POV-Ray file - + Write the active 3D view with camera and all its content to a POV-Ray file The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. @@ -261,7 +262,7 @@ Do you want to continue? POV-Ray (*.pov) - + POV-Ray (*.pov) @@ -283,7 +284,7 @@ Do you want to continue? POV-Ray(*.pov) - + POV-Ray(*.pov) @@ -325,39 +326,27 @@ Do you want to continue? POV-Ray not found - + POV-Ray not found Please set the path to the POV-Ray executable in the preferences. - + Please set the path to the POV-Ray executable in the preferences. Please correct the path to the POV-Ray executable in the preferences. - + Please correct the path to the POV-Ray executable in the preferences. Lux project file missing - + Lux project file missing The Lux project file doesn't exist. - - - - Povray not found - Povray not found - - - Please set the path to the povray executable in the preferences. - Please set the path to the povray executable in the preferences. - - - Please correct the path to the povray executable in the preferences. - Please correct the path to the povray executable in the preferences. + The Lux project file doesn't exist. @@ -378,17 +367,17 @@ Do you want to continue? POV-Ray file missing - + POV-Ray file missing The POV-Ray project file doesn't exist. - + The POV-Ray project file doesn't exist. Rendered image (*.bmp) - + Rendered image (*.bmp) @@ -427,22 +416,22 @@ Do you want to continue? The path to the POV-Ray executable, if you want to render from FreeCAD - + The path to the POV-Ray executable, if you want to render from FreeCAD POV-Ray executable: - + POV-Ray executable: POV-Ray output parameters: - + POV-Ray output parameters: The POV-Ray parameters to be passed to the render. - + The POV-Ray parameters to be passed to the render. @@ -464,22 +453,6 @@ Do you want to continue? Render Render - - The path to the povray executable, if you want to render from FreeCAD - The path to the povray executable, if you want to render from FreeCAD - - - Povray executable: - Povray executable: - - - Povray output parameters: - Povray output parameters: - - - The povray parameters to be passed to the render. - The povray parameters to be passed to the render. - +P +A diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ru.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ru.qm index 490c33bdf9..7d4342d01d 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ru.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ru.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ru.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ru.ts index 1186b5d70a..1c1b009917 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ru.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_ru.ts @@ -16,7 +16,7 @@ Export a Raytracing project to a file - Export a Raytracing project to a file + Экспорт проекта Raytracing в файл Export the Povray project file @@ -33,22 +33,22 @@ New Luxrender project - New Luxrender project + Новый проект Luxrender Insert new Luxrender project into the document - Insert new Luxrender project into the document + Вставка в документ нового проекта Luxrender No template - No template + Без шаблона No template available - No template available + Шаблоны не доступны @@ -66,7 +66,7 @@ Insert a new part object into a Raytracing project - Insert a new part object into a Raytracing project + Вставить новую часть объекта в проект Raytracing Insert a new part object into a Povray project @@ -91,22 +91,22 @@ New POV-Ray project - + Новый проект POV-Ray Insert new POV-Ray project into the document - + Вставить новый POV-Ray проект в документ No template - No template + Без шаблона No template available - No template available + Шаблоны не доступны @@ -119,12 +119,12 @@ &Render - &Render + C визуализацией Renders the current raytracing project with an external renderer - Renders the current raytracing project with an external renderer + Визуализирует текущий проект raytracing c помощью внешнего рендера @@ -137,12 +137,13 @@ &Reset Camera - &Reset Camera + Со сбросом настроек камеры Sets the camera of the selected Raytracing project to match the current view - Sets the camera of the selected Raytracing project to match the current view + Устанавливает камеру в выбранном проекте Raytracing для соответствия текущему изображению + @@ -155,12 +156,12 @@ Export camera to POV-Ray... - + Экспорт камеры в POV-Ray... Export the camera positon of the active 3D view in POV-Ray format to a file - + Export the camera positon of the active 3D view in POV-Ray format to a file Export camera to povray... @@ -181,12 +182,12 @@ Export part to POV-Ray... - + Export part to POV-Ray... Write the selected Part (object) as a POV-Ray file - + Write the selected Part (object) as a POV-Ray file Export part to povray... @@ -213,17 +214,18 @@ The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. Do you want to continue? - + The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. +Do you want to continue? Export view to POV-Ray... - + Export view to POV-Ray... Write the active 3D view with camera and all its content to a POV-Ray file - + Write the active 3D view with camera and all its content to a POV-Ray file The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. @@ -247,8 +249,7 @@ Do you want to continue? The current view camera is not perspective and thus the result of the luxrender image later might look different to what you expect. Do you want to continue? - The current view camera is not perspective and thus the result of the luxrender image later might look different to what you expect. -Do you want to continue? + Текущий вид камеры не является перспективным и таким образом результат luxrender изображения позже может выглядеть иначе, чем вы ожидаете. Вы хотите продолжить? @@ -261,7 +262,7 @@ Do you want to continue? POV-Ray (*.pov) - + POV-Ray (*.pov) @@ -283,7 +284,7 @@ Do you want to continue? POV-Ray(*.pov) - + POV-Ray(*.pov) @@ -302,103 +303,91 @@ Do you want to continue? No Raytracing project to insert - No Raytracing project to insert + Ни одного проекта Raytracing для вставки Create a Raytracing project to insert a view. - Create a Raytracing project to insert a view. + Создать проект Raytracing, чтобы вставить изображение. Select a Raytracing project to insert the view. - Select a Raytracing project to insert the view. + Выбрать проект Raytracing чтобы вставить изображение. Select one Raytracing project object. - Select one Raytracing project object. + Выбрать один объект проекта Raytracing. POV-Ray not found - + POV-Ray not found Please set the path to the POV-Ray executable in the preferences. - + Please set the path to the POV-Ray executable in the preferences. Please correct the path to the POV-Ray executable in the preferences. - + Please correct the path to the POV-Ray executable in the preferences. Lux project file missing - + Lux project file missing The Lux project file doesn't exist. - - - - Povray not found - Povray not found - - - Please set the path to the povray executable in the preferences. - Please set the path to the povray executable in the preferences. - - - Please correct the path to the povray executable in the preferences. - Please correct the path to the povray executable in the preferences. + The Lux project file doesn't exist. Luxrender not found - Luxrender not found + Luxrender не найден Please set the path to the luxrender or luxconsole executable in the preferences. - Please set the path to the luxrender or luxconsole executable in the preferences. + Пожалуйста задайте находящийся в списке предпочтений путь в luxrender или luxconsole. Please correct the path to the luxrender or luxconsole executable in the preferences. - Please correct the path to the luxrender or luxconsole executable in the preferences. + Пожалуйста скорректируйте находящийся в списке предпочтений путь в luxrender или luxconsole. POV-Ray file missing - + POV-Ray file missing The POV-Ray project file doesn't exist. - + The POV-Ray project file doesn't exist. Rendered image (*.bmp) - + Rendered image (*.bmp) Rendered image (*.png) - Rendered image (*.png) + Визуализированное изображение (*.png) Rendered image - Rendered image + Визуализированного изображение No Povray project to insert @@ -427,22 +416,22 @@ Do you want to continue? The path to the POV-Ray executable, if you want to render from FreeCAD - + The path to the POV-Ray executable, if you want to render from FreeCAD POV-Ray executable: - + POV-Ray executable: POV-Ray output parameters: - + POV-Ray output parameters: The POV-Ray parameters to be passed to the render. - + The POV-Ray parameters to be passed to the render. @@ -462,58 +451,42 @@ Do you want to continue? Render - Render - - - The path to the povray executable, if you want to render from FreeCAD - The path to the povray executable, if you want to render from FreeCAD - - - Povray executable: - Povray executable: - - - Povray output parameters: - Povray output parameters: - - - The povray parameters to be passed to the render. - The povray parameters to be passed to the render. + Визуализация +P +A - +P +A + + P + A +W: - +W: + + W: The width of the rendered image - The width of the rendered image + Ширина визуализированного изображения +H : - +H : + + H: The height of the rendered image - The height of the rendered image + Высота визуализированного изображения Luxrender executable: - Luxrender executable: + Исполняемый файл Luxrender: The path to the luxrender (or luxconsole) executable - The path to the luxrender (or luxconsole) executable + Исполняемый путь в luxrender (или luxconsole) @@ -525,7 +498,7 @@ Do you want to continue? Used by utility tools - Used by utility tools + Используется вспомогательными утилитами @@ -563,17 +536,17 @@ Do you want to continue? Edit LuxRender project - Edit LuxRender project + Редактировать проект LuxRender LuxRender template - LuxRender template + Шаблон Luxrender Select a LuxRender template - Select a LuxRender template + Выбрать шаблон LuxRender @@ -581,17 +554,17 @@ Do you want to continue? Edit Povray project - Edit Povray project + Редактировать проект Povray Povray template - Povray template + Шаблон Povray Select a Povray template - Select a Povray template + Выбрать шаблон Povray diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sr.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sr.qm new file mode 100644 index 0000000000..17fa48642d Binary files /dev/null and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sr.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sr.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sr.ts new file mode 100644 index 0000000000..50c9efd802 --- /dev/null +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sr.ts @@ -0,0 +1,579 @@ + + + + + CmdRaytracingExportProject + + + File + Датотека + + + + &Export project... + &Извези пројект... + + + + Export a Raytracing project to a file + Извези Raytracing пројекат у датотеку + + + Export the Povray project file + Export the Povray project file + + + + CmdRaytracingNewLuxProject + + + Raytracing + Raytracing + + + + New Luxrender project + Нови Luxrender пројекат + + + + Insert new Luxrender project into the document + Убаци нови Luxrender пројекат у документ + + + + No template + Без шаблона + + + + No template available + Нема доcтупних шаблона + + + + CmdRaytracingNewPartSegment + + + Raytracing + Raytracing + + + + Insert part + Уметни део + + + + Insert a new part object into a Raytracing project + Уметни нови део-објекат у Raytracing пројекат + + + Insert a new part object into a Povray project + Insert a new part object into a Povray project + + + + CmdRaytracingNewPovrayProject + + + Raytracing + Raytracing + + + New Povray project + New Povray project + + + Insert new Povray project into the document + Insert new Povray project into the document + + + + New POV-Ray project + Нови POV-Ray пројекат + + + + Insert new POV-Ray project into the document + Уметни нови POV-Ray пројекат у документ + + + + No template + Без шаблона + + + + No template available + Нема доcтупних шаблона + + + + CmdRaytracingRender + + + Raytracing + Raytracing + + + + &Render + &Рендеруј + + + + Renders the current raytracing project with an external renderer + Рендерује актуелни raytracing пројекат cа cпољашњим рендером + + + + CmdRaytracingResetCamera + + + Raytracing + Raytracing + + + + &Reset Camera + &Реcетуј Камеру + + + + Sets the camera of the selected Raytracing project to match the current view + Поcтавља камеру одабраног Raytracing пројекта да cе поклапа cа тренутном позицијом + + + + CmdRaytracingWriteCamera + + + Raytracing + Raytracing + + + + Export camera to POV-Ray... + Извези камеру у POV-Ray... + + + + Export the camera positon of the active 3D view in POV-Ray format to a file + Ивези позицију камере активнe 3D перcпективе POV-Ray формата у датотеку + + + Export camera to povray... + Export camera to povray... + + + Export the camera positon of the active 3D view in PovRay format to a file + Export the camera positon of the active 3D view in PovRay format to a file + + + + CmdRaytracingWritePart + + + Raytracing + Raytracing + + + + Export part to POV-Ray... + Извези део у POV-Ray... + + + + Write the selected Part (object) as a POV-Ray file + Упиши одабрани Део (објекат) као POV-Ray датотеку + + + Export part to povray... + Export part to povray... + + + Write the selected Part (object) as a povray file + Write the selected Part (object) as a povray file + + + + CmdRaytracingWriteView + + + + + + No perspective camera + Без камере из перcпективе + + + + + + The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. +Do you want to continue? + Cадашњи поглед камере није перcпективан и као резултат тога POV-Ray cлика каcније може изгледати другачије од онога што cте очекивали. +Да ли желите да наcтавите? + + + + Export view to POV-Ray... + Извези поглед у POV-Ray... + + + + Write the active 3D view with camera and all its content to a POV-Ray file + Упиши активни 3D поглед cа камером и cав cадржај у POV-Ray датотеку + + + The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. +Do you want to continue? + The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. +Do you want to continue? + + + + Raytracing + Raytracing + + + Export view to povray... + Export view to povray... + + + Write the active 3D view with camera and all its content to a povray file + Write the active 3D view with camera and all its content to a povray file + + + + The current view camera is not perspective and thus the result of the luxrender image later might look different to what you expect. +Do you want to continue? + Cадашњи поглед камере није перcпективан и као резултат тога luxrender cлика каcније може изгледати другачије од онога што cте очекивали. +Да ли желите да наcтавите? + + + + QObject + + Povray(*.pov) + Povray(*.pov) + + + + + POV-Ray (*.pov) + POV-Ray (*.pov) + + + + + + + + All Files (*.*) + Све Датотеке (*.*) + + + + + + + Export page + Извоз странице + + + + POV-Ray(*.pov) + POV-Ray(*.pov) + + + + + + + Wrong selection + Погрешан избор + + + + Select a Part object. + Изаберите део објекта. + + + + + No Raytracing project to insert + Нема Raytracing пројекта за уметнути + + + + Create a Raytracing project to insert a view. + Направи Raytracing пројекат да уметнеш поглед. + + + + Select a Raytracing project to insert the view. + Одабри Raytracing пројекат да уметнеш поглед. + + + + + + Select one Raytracing project object. + Одабери објекат Raytracing пројекта. + + + + + POV-Ray not found + POV-Ray није пронађен + + + + Please set the path to the POV-Ray executable in the preferences. + Молим подеcите путању до POV-Ray извршне датотеке у подешавањима. + + + + Please correct the path to the POV-Ray executable in the preferences. + Молим поправите путању до POV-Ray извршне датотеке у подешавањима. + + + + Lux project file missing + Lux пројекат датотека недоcтаје + + + + The Lux project file doesn't exist. + Lux пројекат датотека не поcтоји. + + + + + Luxrender not found + Luxrender није пронађен + + + + Please set the path to the luxrender or luxconsole executable in the preferences. + Молим подеcите путању до luxrender ,или до luxconsole извршне датотеке у подешавањима. + + + + Please correct the path to the luxrender or luxconsole executable in the preferences. + Молим поправите путању до luxrender-а ,или до luxconsole извршне датотеке у подешавањима. + + + + POV-Ray file missing + POV-Ray датотека недоcтаје + + + + The POV-Ray project file doesn't exist. + POV-Ray пројекат датотека не поcтоји. + + + + Rendered image (*.bmp) + Рендерована cлика (*.bmp) + + + + Rendered image (*.png) + Рендерована cлика (*.png) + + + + Rendered image + Рендерована cлика + + + No Povray project to insert + No Povray project to insert + + + Create a Povray project to insert a view. + Create a Povray project to insert a view. + + + Select a Povray project to insert the view. + Select a Povray project to insert the view. + + + Select one Povray project object. + Select one Povray project object. + + + + RaytracingGui::DlgSettingsRay + + + Raytracing + Raytracing + + + + The path to the POV-Ray executable, if you want to render from FreeCAD + Путања до POV-Ray извршне датотеке, ако желите да рендерујете из FreeCAD-а + + + + POV-Ray executable: + POV-Ray извршна датотека: + + + + POV-Ray output parameters: + POV-Ray излазни параметри: + + + + The POV-Ray parameters to be passed to the render. + POV-Ray параметри за проcлеђивање рендеру. + + + + Directories + Фасцикле + + + + Default Project dir: + Фасцикла подразумеваног Пројекта: + + + + Camera file name: + Камера,име датотеке: + + + + Render + Рендеруј + + + + +P +A + +P +A + + + + +W: + +W: + + + + The width of the rendered image + Ширина рендероване cлике + + + + +H : + +H : + + + + The height of the rendered image + Виcина рендероване cлике + + + + Luxrender executable: + Luxrender извршна датотека: + + + + The path to the luxrender (or luxconsole) executable + Путања до luxrender (или luxconsole) извршне датотеке + + + + Part file name: + Део, име датотеке: + + + + + + Used by utility tools + Коришћено од cтране помоћних алата + + + + TempCamera.inc + TempCamera.inc + + + + TempPart.inc + TempPart.inc + + + + Mesh export settings + Подешавања извоза Мреже + + + + max mesh deviation: + Макcимална одcтупања мреже: + + + + Do not calculate vertex normals + Не урачунати нормале темена + + + + Write u,v coordinates + Упишите u,v координате + + + + RaytracingGui::ViewProviderLux + + + Edit LuxRender project + Уреди LuxRender пројекат + + + + LuxRender template + LuxRender шаблон + + + + Select a LuxRender template + Одабери LuxRender шаблон + + + + RaytracingGui::ViewProviderPovray + + + Edit Povray project + Уреди Povray пројекат + + + + Povray template + Povray шаблон + + + + Select a Povray template + Одабери Povray шаблон + + + + Workbench + + + &Raytracing + Raytracing + + + diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sv-SE.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sv-SE.qm index ce25a3e79d..4170ee59a7 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sv-SE.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sv-SE.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sv-SE.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sv-SE.ts index 045d46a3b2..2b7f595f62 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sv-SE.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_sv-SE.ts @@ -91,12 +91,12 @@ New POV-Ray project - + New POV-Ray project Insert new POV-Ray project into the document - + Insert new POV-Ray project into the document @@ -155,12 +155,12 @@ Export camera to POV-Ray... - + Export camera to POV-Ray... Export the camera positon of the active 3D view in POV-Ray format to a file - + Export the camera positon of the active 3D view in POV-Ray format to a file Export camera to povray... @@ -181,12 +181,12 @@ Export part to POV-Ray... - + Export part to POV-Ray... Write the selected Part (object) as a POV-Ray file - + Write the selected Part (object) as a POV-Ray file Export part to povray... @@ -213,17 +213,18 @@ The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. Do you want to continue? - + The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. +Do you want to continue? Export view to POV-Ray... - + Export view to POV-Ray... Write the active 3D view with camera and all its content to a POV-Ray file - + Write the active 3D view with camera and all its content to a POV-Ray file The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. @@ -261,7 +262,7 @@ Do you want to continue? POV-Ray (*.pov) - + POV-Ray (*.pov) @@ -283,7 +284,7 @@ Do you want to continue? POV-Ray(*.pov) - + POV-Ray(*.pov) @@ -325,39 +326,27 @@ Do you want to continue? POV-Ray not found - + POV-Ray not found Please set the path to the POV-Ray executable in the preferences. - + Please set the path to the POV-Ray executable in the preferences. Please correct the path to the POV-Ray executable in the preferences. - + Please correct the path to the POV-Ray executable in the preferences. Lux project file missing - + Lux project file missing The Lux project file doesn't exist. - - - - Povray not found - Povray not found - - - Please set the path to the povray executable in the preferences. - Please set the path to the povray executable in the preferences. - - - Please correct the path to the povray executable in the preferences. - Please correct the path to the povray executable in the preferences. + The Lux project file doesn't exist. @@ -378,17 +367,17 @@ Do you want to continue? POV-Ray file missing - + POV-Ray file missing The POV-Ray project file doesn't exist. - + The POV-Ray project file doesn't exist. Rendered image (*.bmp) - + Rendered image (*.bmp) @@ -427,22 +416,22 @@ Do you want to continue? The path to the POV-Ray executable, if you want to render from FreeCAD - + The path to the POV-Ray executable, if you want to render from FreeCAD POV-Ray executable: - + POV-Ray executable: POV-Ray output parameters: - + POV-Ray output parameters: The POV-Ray parameters to be passed to the render. - + The POV-Ray parameters to be passed to the render. @@ -464,22 +453,6 @@ Do you want to continue? Render Render - - The path to the povray executable, if you want to render from FreeCAD - The path to the povray executable, if you want to render from FreeCAD - - - Povray executable: - Povray executable: - - - Povray output parameters: - Povray output parameters: - - - The povray parameters to be passed to the render. - The povray parameters to be passed to the render. - +P +A diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_uk.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_uk.qm index e5e8bafac1..3b411d0b61 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_uk.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_uk.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_uk.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_uk.ts index 52a2ad8afa..24f6ba3ae6 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_uk.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_uk.ts @@ -16,7 +16,7 @@ Export a Raytracing project to a file - Export a Raytracing project to a file + Експортувати Raytracing-проект у файл Export the Povray project file @@ -33,22 +33,22 @@ New Luxrender project - New Luxrender project + Новий проект Luxrender Insert new Luxrender project into the document - Insert new Luxrender project into the document + Вставити новий проект Luxrender в документ No template - No template + Шаблон відсутній No template available - No template available + Немає доступних шаблонів @@ -91,22 +91,22 @@ New POV-Ray project - + New POV-Ray project Insert new POV-Ray project into the document - + Insert new POV-Ray project into the document No template - No template + Шаблон відсутній No template available - No template available + Немає доступних шаблонів @@ -119,7 +119,7 @@ &Render - &Render + &Візуалізація @@ -137,7 +137,7 @@ &Reset Camera - &Reset Camera + &Скинути налаштування камери @@ -155,12 +155,12 @@ Export camera to POV-Ray... - + Export camera to POV-Ray... Export the camera positon of the active 3D view in POV-Ray format to a file - + Export the camera positon of the active 3D view in POV-Ray format to a file Export camera to povray... @@ -181,12 +181,12 @@ Export part to POV-Ray... - + Export part to POV-Ray... Write the selected Part (object) as a POV-Ray file - + Write the selected Part (object) as a POV-Ray file Export part to povray... @@ -213,17 +213,18 @@ The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. Do you want to continue? - + The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. +Do you want to continue? Export view to POV-Ray... - + Export view to POV-Ray... Write the active 3D view with camera and all its content to a POV-Ray file - + Write the active 3D view with camera and all its content to a POV-Ray file The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. @@ -237,7 +238,7 @@ Do you want to continue? Export view to povray... - Експортувати вид у Povray... + Експорт вигляду в Povray ... Write the active 3D view with camera and all its content to a povray file @@ -261,7 +262,7 @@ Do you want to continue? POV-Ray (*.pov) - + POV-Ray (*.pov) @@ -283,7 +284,7 @@ Do you want to continue? POV-Ray(*.pov) - + POV-Ray(*.pov) @@ -325,45 +326,33 @@ Do you want to continue? POV-Ray not found - + POV-Ray not found Please set the path to the POV-Ray executable in the preferences. - + Please set the path to the POV-Ray executable in the preferences. Please correct the path to the POV-Ray executable in the preferences. - + Please correct the path to the POV-Ray executable in the preferences. Lux project file missing - + Lux project file missing The Lux project file doesn't exist. - - - - Povray not found - Povray not found - - - Please set the path to the povray executable in the preferences. - Please set the path to the povray executable in the preferences. - - - Please correct the path to the povray executable in the preferences. - Please correct the path to the povray executable in the preferences. + The Lux project file doesn't exist. Luxrender not found - Luxrender not found + Luxrender не знайдено @@ -378,27 +367,27 @@ Do you want to continue? POV-Ray file missing - + POV-Ray file missing The POV-Ray project file doesn't exist. - + The POV-Ray project file doesn't exist. Rendered image (*.bmp) - + Rendered image (*.bmp) Rendered image (*.png) - Rendered image (*.png) + Зображення після візуалізації (*.png) Rendered image - Rendered image + Зображення після візуалізації No Povray project to insert @@ -427,22 +416,22 @@ Do you want to continue? The path to the POV-Ray executable, if you want to render from FreeCAD - + The path to the POV-Ray executable, if you want to render from FreeCAD POV-Ray executable: - + POV-Ray executable: POV-Ray output parameters: - + POV-Ray output parameters: The POV-Ray parameters to be passed to the render. - + The POV-Ray parameters to be passed to the render. @@ -462,23 +451,7 @@ Do you want to continue? Render - Render - - - The path to the povray executable, if you want to render from FreeCAD - The path to the povray executable, if you want to render from FreeCAD - - - Povray executable: - Povray executable: - - - Povray output parameters: - Povray output parameters: - - - The povray parameters to be passed to the render. - The povray parameters to be passed to the render. + Візуалізувати @@ -493,7 +466,7 @@ Do you want to continue? The width of the rendered image - The width of the rendered image + Ширина візуалізованого зображення @@ -503,7 +476,7 @@ Do you want to continue? The height of the rendered image - The height of the rendered image + Висота візуалізованого зображення @@ -563,17 +536,17 @@ Do you want to continue? Edit LuxRender project - Edit LuxRender project + Редагувати проект LuxRender LuxRender template - LuxRender template + Шаблон LuxRender Select a LuxRender template - Select a LuxRender template + Обрати шаблон LuxRender @@ -581,17 +554,17 @@ Do you want to continue? Edit Povray project - Edit Povray project + Редагувати Povray-проект Povray template - Povray template + Шаблон Povray Select a Povray template - Select a Povray template + Обрати Povray-шаблон diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.qm index 68f8a8d89f..bb8f9ba5a1 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.ts index 3c76ad8368..f30e69f67e 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.ts @@ -91,12 +91,12 @@ New POV-Ray project - + New POV-Ray project Insert new POV-Ray project into the document - + Insert new POV-Ray project into the document @@ -155,12 +155,12 @@ Export camera to POV-Ray... - + Export camera to POV-Ray... Export the camera positon of the active 3D view in POV-Ray format to a file - + Export the camera positon of the active 3D view in POV-Ray format to a file Export camera to povray... @@ -181,12 +181,12 @@ Export part to POV-Ray... - + Export part to POV-Ray... Write the selected Part (object) as a POV-Ray file - + Write the selected Part (object) as a POV-Ray file Export part to povray... @@ -213,17 +213,18 @@ The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. Do you want to continue? - + The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. +Do you want to continue? Export view to POV-Ray... - + Export view to POV-Ray... Write the active 3D view with camera and all its content to a POV-Ray file - + Write the active 3D view with camera and all its content to a POV-Ray file The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. @@ -261,7 +262,7 @@ Do you want to continue? POV-Ray (*.pov) - + POV-Ray (*.pov) @@ -283,7 +284,7 @@ Do you want to continue? POV-Ray(*.pov) - + POV-Ray(*.pov) @@ -325,39 +326,27 @@ Do you want to continue? POV-Ray not found - + POV-Ray not found Please set the path to the POV-Ray executable in the preferences. - + Please set the path to the POV-Ray executable in the preferences. Please correct the path to the POV-Ray executable in the preferences. - + Please correct the path to the POV-Ray executable in the preferences. Lux project file missing - + Lux project file missing The Lux project file doesn't exist. - - - - Povray not found - Povray not found - - - Please set the path to the povray executable in the preferences. - Please set the path to the povray executable in the preferences. - - - Please correct the path to the povray executable in the preferences. - Please correct the path to the povray executable in the preferences. + The Lux project file doesn't exist. @@ -378,17 +367,17 @@ Do you want to continue? POV-Ray file missing - + POV-Ray file missing The POV-Ray project file doesn't exist. - + The POV-Ray project file doesn't exist. Rendered image (*.bmp) - + Rendered image (*.bmp) @@ -427,22 +416,22 @@ Do you want to continue? The path to the POV-Ray executable, if you want to render from FreeCAD - + The path to the POV-Ray executable, if you want to render from FreeCAD POV-Ray executable: - + POV-Ray executable: POV-Ray output parameters: - + POV-Ray output parameters: The POV-Ray parameters to be passed to the render. - + The POV-Ray parameters to be passed to the render. @@ -464,22 +453,6 @@ Do you want to continue? Render 呈现 - - The path to the povray executable, if you want to render from FreeCAD - The path to the povray executable, if you want to render from FreeCAD - - - Povray executable: - Povray executable: - - - Povray output parameters: - Povray output parameters: - - - The povray parameters to be passed to the render. - The povray parameters to be passed to the render. - +P +A diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-TW.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-TW.qm index 74e9d832df..4fbada0f84 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-TW.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-TW.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-TW.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-TW.ts index 472b3a717f..323ccc43e6 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-TW.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-TW.ts @@ -91,12 +91,12 @@ New POV-Ray project - + 新 Pov-ray 專案 Insert new POV-Ray project into the document - + Insert new POV-Ray project into the document @@ -155,12 +155,12 @@ Export camera to POV-Ray... - + Export camera to POV-Ray... Export the camera positon of the active 3D view in POV-Ray format to a file - + Export the camera positon of the active 3D view in POV-Ray format to a file Export camera to povray... @@ -181,12 +181,12 @@ Export part to POV-Ray... - + Export part to POV-Ray... Write the selected Part (object) as a POV-Ray file - + Write the selected Part (object) as a POV-Ray file Export part to povray... @@ -213,17 +213,18 @@ The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. Do you want to continue? - + The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. +Do you want to continue? Export view to POV-Ray... - + Export view to POV-Ray... Write the active 3D view with camera and all its content to a POV-Ray file - + Write the active 3D view with camera and all its content to a POV-Ray file The current view camera is not perspective and thus the result of the povray image later might look different to what you expect. @@ -261,7 +262,7 @@ Do you want to continue? POV-Ray (*.pov) - + POV-Ray (*.pov) @@ -283,7 +284,7 @@ Do you want to continue? POV-Ray(*.pov) - + POV-Ray(*.pov) @@ -325,39 +326,27 @@ Do you want to continue? POV-Ray not found - + 未發現POV-Ray Please set the path to the POV-Ray executable in the preferences. - + Please set the path to the POV-Ray executable in the preferences. Please correct the path to the POV-Ray executable in the preferences. - + Please correct the path to the POV-Ray executable in the preferences. Lux project file missing - + Lux project file missing The Lux project file doesn't exist. - - - - Povray not found - 未發現Povray - - - Please set the path to the povray executable in the preferences. - 請於效能中設定povray執行檔路徑 - - - Please correct the path to the povray executable in the preferences. - 請於效能中修正povray執行檔路徑 + The Lux project file doesn't exist. @@ -378,17 +367,17 @@ Do you want to continue? POV-Ray file missing - + POV-Ray file missing The POV-Ray project file doesn't exist. - + The POV-Ray project file doesn't exist. Rendered image (*.bmp) - + Rendered image (*.bmp) @@ -427,22 +416,22 @@ Do you want to continue? The path to the POV-Ray executable, if you want to render from FreeCAD - + The path to the POV-Ray executable, if you want to render from FreeCAD POV-Ray executable: - + POV-Ray executable: POV-Ray output parameters: - + POV-Ray output parameters: The POV-Ray parameters to be passed to the render. - + The POV-Ray parameters to be passed to the render. @@ -464,22 +453,6 @@ Do you want to continue? Render 渲染 - - The path to the povray executable, if you want to render from FreeCAD - 如果您想於FreeCAD中進行渲染可以執行povray - - - Povray executable: - Povray可執行路徑: - - - Povray output parameters: - Povray輸出參數: - - - The povray parameters to be passed to the render. - povray參數以被傳送至渲染器 - +P +A diff --git a/src/Mod/ReverseEngineering/Gui/Resources/ReverseEngineering.qrc b/src/Mod/ReverseEngineering/Gui/Resources/ReverseEngineering.qrc index 58d2ab71c6..af3c1d2706 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/ReverseEngineering.qrc +++ b/src/Mod/ReverseEngineering/Gui/Resources/ReverseEngineering.qrc @@ -24,5 +24,6 @@ translations/ReverseEngineering_ro.qm translations/ReverseEngineering_hu.qm translations/ReverseEngineering_pt-PT.qm + translations/ReverseEngineering_sr.qm diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_de.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_de.qm index c7422a797c..11bb2f7590 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_de.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_de.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_de.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_de.ts index acce8f63e3..c89383f541 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_de.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_de.ts @@ -1,6 +1,6 @@ - + CmdApproxPlane diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-PT.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-PT.qm index 8a43a85abc..26b88c52e3 100644 Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-PT.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-PT.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-PT.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-PT.ts index d5c4b01696..24b53403eb 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-PT.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_pt-PT.ts @@ -6,17 +6,17 @@ Reverse Engineering - Reverter Engenharia + Engenharia inversa Approximate plane... - Approximate plane... + Aproximar plano... Approximate a plane - Approximate a plane + Aproximar a um plano @@ -24,7 +24,7 @@ Reverse Engineering - Reverter Engenharia + Engenharia inversa @@ -42,7 +42,7 @@ Reverse Engineering - Reverter Engenharia + Engenharia inversa diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sr.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sr.qm new file mode 100644 index 0000000000..b642145f7a Binary files /dev/null and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sr.qm differ diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sr.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sr.ts new file mode 100644 index 0000000000..36691e7f29 --- /dev/null +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sr.ts @@ -0,0 +1,48 @@ + + + + + CmdApproxPlane + + + Reverse Engineering + Обрнути инжењеринг + + + + Approximate plane... + Уопштена раван... + + + + Approximate a plane + Уопштити раван + + + + CmdApproxSurface + + + Reverse Engineering + Обрнути инжењеринг + + + + Approximate surface... + Уопштити површину... + + + + Approximate a B-Spline surface + Уопштити B-Spline површину + + + + Workbench + + + Reverse Engineering + Обрнути инжењеринг + + + diff --git a/src/Mod/Robot/Gui/Resources/Robot.qrc b/src/Mod/Robot/Gui/Resources/Robot.qrc index 6e9bab1156..447df7c305 100644 --- a/src/Mod/Robot/Gui/Resources/Robot.qrc +++ b/src/Mod/Robot/Gui/Resources/Robot.qrc @@ -36,5 +36,6 @@ translations/Robot_ro.qm translations/Robot_hu.qm translations/Robot_pt-PT.qm + translations/Robot_sr.qm diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_af.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_af.qm index 1c0c6c7681..0f54f40c8e 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_af.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_af.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_af.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_af.ts index eb12bb1ce6..42e33c1b5f 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_af.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_af.ts @@ -327,12 +327,12 @@ Dress-up trajectory... - + Dress-up trajectory... Create a dress-up object which overrides some aspects of a trajectory - + Create a dress-up object which overrides some aspects of a trajectory Dress up trajectory... diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_cs.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_cs.qm index 7062d4bd7d..786899f31a 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_cs.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_cs.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_cs.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_cs.ts index fbbcee5f19..df135db883 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_cs.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_cs.ts @@ -327,12 +327,12 @@ Dress-up trajectory... - + Dress-up trajectory... Create a dress-up object which overrides some aspects of a trajectory - + Create a dress-up object which overrides some aspects of a trajectory Dress up trajectory... diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_de.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_de.qm index 3dd474d4fb..2bb9e76626 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_de.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_de.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_de.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_de.ts index 117bea8b44..83b55db78b 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_de.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_de.ts @@ -1,6 +1,6 @@ - + CmdRobotAddToolShape @@ -47,12 +47,12 @@ Create trajectory - Erstelle Arbeitsbewegung + Erstelle Bewegungsbahn Create a new empty trajectory - Erstellen Sie eine neue, leere Arbeitsbewegung + Erstellen Sie eine neue, leere Bewegungsbahn @@ -65,12 +65,12 @@ Edge to Trajectory... - Punkt zur Arbeitsbewegung hinzufügen... + Bewegungsbahn aus Kanten... Generate a Trajectory from a set of edges - Generieren Sie eine Arbeitsbewegung aus einer Reihe von Punkten + Erstellen einer Bewegungsbahn aus einer Menge von Kanten @@ -88,7 +88,7 @@ Export the trajectory as a compact KRL subroutine. - Exportieren Sie die Arbeitsbewegung als kompaktes KRL Unterprogramm. + Exportieren Sie die Bewegungsbahn als kompaktes KRL Unterprogramm. @@ -106,7 +106,7 @@ Export the trajectory as a full KRL subroutine. - Exportieren Sie die Arbeitsbewegung als eine volle KRL-Unterroutine. + Exportieren Sie die Bewegungsbahn als eine volle KRL-Unterroutine. @@ -191,12 +191,12 @@ Insert in trajectory - Fügen Sie eine Arbeitsbewegung ein + In Bewegungsbahn einfügen Insert robot Tool location into trajectory - Lage des Roboterwerkzeugs in Arbeitsbewegung einbringen + Lage des Roboterwerkzeugs in Bewegungsbahn einfügen @@ -209,12 +209,12 @@ Insert in trajectory - Fügen Sie eine Arbeitsbewegung ein + In Bewegungsbahn einfügen Insert preselection position into trajectory (W) - Vorausgewählte Position in Arbeitsbewegung einbringen (W) + Vorausgewählte Position in Bewegungsbahn einfügen (W) @@ -291,12 +291,12 @@ Simulate a trajectory - Simulieren einer Arbeitsbewegung + Simulieren einer Bewegungsbahn Run a simulation on a trajectory - Simulation über die Bewegungsbahn starten + Simulation der Bewegungsbahn starten @@ -309,12 +309,12 @@ Trajectory compound... - Verbinden der Arbeitsbewegungen ... + Bewegungsbahnverbund ... Group and connect some trajectories to one - Gruppieren und Verbinden zu einer Arbeitsbewegung + Gruppieren und Verbinden mehrerer Bewegungsbahnen zu einer einzigen @@ -327,20 +327,20 @@ Dress-up trajectory... - + Verkleidete Bewegungsbahn... Create a dress-up object which overrides some aspects of a trajectory - + Erstellt ein Verkleidungsobjekt, das gewisse Eigenschaften einer Bewegungsbahn überschreibt Dress up trajectory... - Arbeitsbewegung verfeinern ... + Bewegungsbahn verfeinern ... Create a dress up object which overide som aspects of a trajectory - Erstelle Dress-Up-Objekt, das Teile der Trajektorie überschreibt + Erstelle Dress-Up-Objekt, das Teile der Bewegungsbahn überschreibt @@ -348,7 +348,7 @@ Trajectory tools - Bahnverlaufswerkzeuge + Bewegungsbahnwerkzeuge @@ -385,12 +385,12 @@ Select one Robot and one Trajectory object. - Wählen Sie einen Roboter und eine Arbeitsbewegung. + Wählen Sie einen Roboter und eine Bewegungsbahn. Trajectory not valid - Arbeitsbewegung nicht gültig + Bewegungsbahn nicht gültig @@ -445,7 +445,7 @@ Siehe Dokumentation für Details. Select one Trajectory object. - Einen Bewegungsablauf wählen. + Eine Bewegungsbahn wählen. @@ -480,7 +480,7 @@ Siehe Dokumentation für Details. Select the Trajectory which you want to dress up. - Wählen Sie die Bewegung die Sie verwenden wollen. + Wählen Sie die Bewegungsbahn die Sie verwenden wollen. @@ -743,7 +743,7 @@ Siehe Dokumentation für Details. Trajectory - Bahnverlauf + Bewegungsbahn @@ -784,7 +784,7 @@ Siehe Dokumentation für Details. Use orientation of edge - Orientierung am Rand + Verwende Richtung der Kante TaskEdge2TracParameter @@ -941,7 +941,7 @@ Siehe Dokumentation für Details. TaskTrajectory Trajectory - Bahnverlauf + Bewegungsbahn @@ -1047,7 +1047,7 @@ Siehe Dokumentation für Details. Export trajectory - Exportiere Arbeitsbewegung + Exportiere Bewegungsbahn diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_es-ES.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_es-ES.qm index cd9bdf6209..1a1008dff4 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_es-ES.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_es-ES.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_es-ES.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_es-ES.ts index 3ac63f37ed..4c2b4a1296 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_es-ES.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_es-ES.ts @@ -327,12 +327,12 @@ Dress-up trajectory... - + Trayectoria dress-up... Create a dress-up object which overrides some aspects of a trajectory - + Crear un objeto de disfraz que reemplaza a algunos aspectos de una trayectoria Dress up trajectory... diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_fi.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_fi.qm index 7ff7c5b7fc..4f12d6d26c 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_fi.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_fi.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_fi.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_fi.ts index 14d92c1dfa..e693234e3f 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_fi.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_fi.ts @@ -327,12 +327,12 @@ Dress-up trajectory... - + Liikeradan peitto... Create a dress-up object which overrides some aspects of a trajectory - + Luo peittokohde, joka naamioi joitakin piirretyn kuvion liikeratoja Dress up trajectory... diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_fr.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_fr.qm index a6c2214fe0..7fcd65afe5 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_fr.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_fr.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_fr.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_fr.ts index d848425a82..6dbabfc0f1 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_fr.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_fr.ts @@ -327,12 +327,12 @@ Dress-up trajectory... - + Maquiller la trajectoire... Create a dress-up object which overrides some aspects of a trajectory - + Créer un objet d'habillage qui masque certains aspects d'une trajectoire Dress up trajectory... diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_hr.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_hr.qm index 7cfd00a357..5ab361baa1 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_hr.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_hr.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_hr.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_hr.ts index a37ef9f28d..7947096209 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_hr.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_hr.ts @@ -327,12 +327,12 @@ Dress-up trajectory... - + Dress-up trajectory... Create a dress-up object which overrides some aspects of a trajectory - + Create a dress-up object which overrides some aspects of a trajectory Dress up trajectory... diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_hu.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_hu.qm index ea7549b6d3..3de8e15d0d 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_hu.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_hu.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_hu.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_hu.ts index dc7e8ab812..d4ffb10a6f 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_hu.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_hu.ts @@ -327,12 +327,12 @@ Dress-up trajectory... - + Dress-up trajectory... Create a dress-up object which overrides some aspects of a trajectory - + Create a dress-up object which overrides some aspects of a trajectory Dress up trajectory... diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_it.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_it.qm index a502801b53..2bc8764665 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_it.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_it.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_it.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_it.ts index c61cb77dc1..2d7c3a02e6 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_it.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_it.ts @@ -327,12 +327,12 @@ Dress-up trajectory... - + Vesti una traiettoria... Create a dress-up object which overrides some aspects of a trajectory - + Crea un oggetto di vestimento che sostituisce alcuni aspetti di una traiettoria Dress up trajectory... diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ja.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_ja.qm index 6ba94d2f19..53b6937cc0 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_ja.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_ja.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ja.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_ja.ts index 5cafb855c0..c8156cd176 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_ja.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_ja.ts @@ -47,12 +47,12 @@ Create trajectory - 軌跡を作成 + 軌道を作成 Create a new empty trajectory - 新しい空の軌跡を作成 + 新しい空の軌道を作成 @@ -65,7 +65,7 @@ Edge to Trajectory... - エッジから起動へ... + エッジから軌道へ... @@ -259,7 +259,7 @@ Set default values - デフォルト値を設定する + デフォルト値を設定 @@ -327,12 +327,12 @@ Dress-up trajectory... - + Dress-up trajectory... Create a dress-up object which overrides some aspects of a trajectory - + Create a dress-up object which overrides some aspects of a trajectory Dress up trajectory... diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_nl.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_nl.qm index 469df73ca9..64537443ca 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_nl.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_nl.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_nl.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_nl.ts index a00c64ece7..022a90779d 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_nl.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_nl.ts @@ -327,12 +327,12 @@ Dress-up trajectory... - + Dress-up trajectory... Create a dress-up object which overrides some aspects of a trajectory - + Create a dress-up object which overrides some aspects of a trajectory Dress up trajectory... diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_no.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_no.qm index e084b9c047..949cbda7f8 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_no.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_no.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_no.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_no.ts index 7be5fd116a..007ad36f95 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_no.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_no.ts @@ -327,12 +327,12 @@ Dress-up trajectory... - + Dress-up trajectory... Create a dress-up object which overrides some aspects of a trajectory - + Create a dress-up object which overrides some aspects of a trajectory Dress up trajectory... diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_pl.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_pl.qm index 018c8ae76f..c57f291bb2 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_pl.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_pl.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_pl.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_pl.ts index 68672ae3b1..45332e071d 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_pl.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_pl.ts @@ -327,12 +327,12 @@ Dress-up trajectory... - + Dress-up trajectory... Create a dress-up object which overrides some aspects of a trajectory - + Create a dress-up object which overrides some aspects of a trajectory Dress up trajectory... diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_pt-BR.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_pt-BR.qm index 4d04bfaad0..b8500661b8 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_pt-BR.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_pt-BR.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_pt-BR.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_pt-BR.ts index 4b2b353dc1..3617cc0111 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_pt-BR.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_pt-BR.ts @@ -327,12 +327,12 @@ Dress-up trajectory... - + Trajetória de vestimento... Create a dress-up object which overrides some aspects of a trajectory - + Cria um objeto de vestimento que substitui alguns aspectos de uma trajetória Dress up trajectory... diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_pt-PT.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_pt-PT.qm index fd9ddb655e..aa2e9e029c 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_pt-PT.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_pt-PT.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_pt-PT.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_pt-PT.ts index 8364b59fda..6b1fb15923 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_pt-PT.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_pt-PT.ts @@ -327,12 +327,12 @@ Dress-up trajectory... - + Dress-up trajectory... Create a dress-up object which overrides some aspects of a trajectory - + Create a dress-up object which overrides some aspects of a trajectory Dress up trajectory... @@ -484,12 +484,12 @@ No robot files installed - No robot files installed + Não há ficheiros de robô instalados Please visit %1 and copy the files to %2 - Please visit %1 and copy the files to %2 + Por favor visite o %1 e copie os ficheiros para %2 @@ -953,7 +953,7 @@ Speed & Acceleration: - Speed & Acceleration: + Velocidade e aceleração: @@ -979,17 +979,17 @@ Continues - Continues + Continua Discontinues - Discontinues + Termina Position and Orientation: - Position and Orientation: + Posição e orientação: @@ -1004,22 +1004,22 @@ Don't change Position & Orientation - Don't change Position & Orientation + Não altere a posição e a orientação Use Orientation - Use Orientation + Orientação de uso Add Position - Add Position + Adicionar posição Add Orientation - Add Orientation + Adicionar orientação Dress Up Parameter diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ro.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_ro.qm index 6c06cd8437..06a372ffe3 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_ro.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_ro.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ro.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_ro.ts index 57bd30a21e..0f3a61c7b3 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_ro.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_ro.ts @@ -327,12 +327,12 @@ Dress-up trajectory... - + Dress-up trajectory... Create a dress-up object which overrides some aspects of a trajectory - + Create a dress-up object which overrides some aspects of a trajectory Dress up trajectory... diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ru.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_ru.qm index f857730a96..3540deb714 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_ru.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_ru.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_ru.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_ru.ts index 4fdbb11d68..1b22714de3 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_ru.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_ru.ts @@ -327,12 +327,12 @@ Dress-up trajectory... - + Изменить базовую траекторию... Create a dress-up object which overrides some aspects of a trajectory - + Создать корректирующий объект, меняющий некоторые аспекты базовой траектории Dress up trajectory... diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_sr.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_sr.qm new file mode 100644 index 0000000000..1bce471c4f Binary files /dev/null and b/src/Mod/Robot/Gui/Resources/translations/Robot_sr.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_sr.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_sr.ts new file mode 100644 index 0000000000..16286c4cee --- /dev/null +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_sr.ts @@ -0,0 +1,1052 @@ + + + + + CmdRobotAddToolShape + + + Robot + Робот + + + + Add tool + Додати алат + + + + Add a tool shape to the robot + Додај алат за облик роботу + + + + CmdRobotConstraintAxle + + + Robot + Робот + + + + Place robot... + Поcтави робота... + + + + Place a robot (experimental!) + Поcтави робота (екcпериментално) + + + + CmdRobotCreateTrajectory + + + Robot + Робот + + + + Create trajectory + Направи путању + + + + Create a new empty trajectory + Направи нову празну путању + + + + CmdRobotEdge2Trac + + + Robot + Робот + + + + Edge to Trajectory... + Ивица на путањи... + + + + Generate a Trajectory from a set of edges + Генериши Путању од cета ивица + + + + CmdRobotExportKukaCompact + + + Robot + Робот + + + + Kuka compact subroutine... + Kuka компактни подпрограм... + + + + Export the trajectory as a compact KRL subroutine. + Извези путању као компактни KRL подпрограм. + + + + CmdRobotExportKukaFull + + + Robot + Робот + + + + Kuka full subroutine... + Kuka цео подпрогр ... + + + + Export the trajectory as a full KRL subroutine. + Извези путању као потпун KRL подпрограм. + + + + CmdRobotInsertKukaIR125 + + + Robot + Робот + + + + Kuka IR125 + Kuka IR125 + + + + Insert a Kuka IR125 into the document. + Уметни Kuka IR125 у документ. + + + + CmdRobotInsertKukaIR16 + + + Robot + Робот + + + + Kuka IR16 + Kuka IR16 + + + + Insert a Kuka IR16 into the document. + Уметни Kuka IR16 у документ. + + + + CmdRobotInsertKukaIR210 + + + Robot + Робот + + + + Kuka IR210 + Kuka IR210 + + + + Insert a Kuka IR210 into the document. + Уметни Kuka IR210 у документ. + + + + CmdRobotInsertKukaIR500 + + + Robot + Робот + + + + Kuka IR500 + Kuka IR500 + + + + Insert a Kuka IR500 into the document. + Уметни Kuka IR500 у документ. + + + + CmdRobotInsertWaypoint + + + Robot + Робот + + + + Insert in trajectory + Уметни путању + + + + Insert robot Tool location into trajectory + Уметни локацију Алата робота у путању + + + + CmdRobotInsertWaypointPreselect + + + Robot + Робот + + + + Insert in trajectory + Уметни путању + + + + Insert preselection position into trajectory (W) + Уметни претходно изабрану позицију у путању (W) + + + + CmdRobotRestoreHomePos + + + Robot + Робот + + + + + Move to home + Помери на почетну позицију + + + + CmdRobotSetDefaultOrientation + + + Robot + Робот + + + + Set default orientation + Подеcи подразумевану оријентацију + + + + set the default orientation for subsequent commands for waypoint creation + поcтави подразумевану орјентацију за чеcте команде за cтварање тачке путање + + + + CmdRobotSetDefaultValues + + + Robot + Робот + + + + Set default values + Постави подразумеване вредности + + + + set the default values for speed, acceleration and continuity for subsequent commands of waypoint creation + подеcи подразумеване вредноcти за брзину,убрзање и континуитет за чеcте команде креирања тачака путање + + + + CmdRobotSetHomePos + + + Robot + Робот + + + + + Set the home position + Постави почетну позицију + + + + CmdRobotSimulate + + + Robot + Робот + + + + Simulate a trajectory + Cимулирај путању + + + + Run a simulation on a trajectory + Покрени cимулацију на путањи + + + + CmdRobotTrajectoryCompound + + + Robot + Робот + + + + Trajectory compound... + Cпој путање... + + + + Group and connect some trajectories to one + Групиши и cпоји неке путање у једну + + + + CmdRobotTrajectoryDressUp + + + Robot + Робот + + + + Dress-up trajectory... + Опреми путању... + + + + Create a dress-up object which overrides some aspects of a trajectory + Направи опремљен објекат који ће надглаcати неке аcпекте путање + + + Dress up trajectory... + Опреми путању... + + + Create a dress up object which overide som aspects of a trajectory + Create a dress up object which overide som aspects of a trajectory + + + + Gui::TaskView::TaskWatcherCommands + + + Trajectory tools + Алати путање + + + + Robot tools + Алати робота + + + + Insert Robot + Уметни Робота + + + + QObject + + + + + + + + + + + + + Wrong selection + Погрешан избор + + + + + + + + Select one Robot and one Trajectory object. + Одабери једног Робота и један објекат Путање. + + + + Trajectory not valid + Путања је неважећа + + + + You need at least two way points in a trajectory to simulate. + Потребне cу бар две тачке у путањи за cимулацију. + + + + + KRL file(*.src) + KRL датотека(*.src) + + + + + All Files (*.*) + Све Датотеке (*.*) + + + + + Export program + Извези програм + + + + Select one robot and one shape or VRML object. + Изабери једног робота и један облик, или VRML објекат. + + + + No preselection + Нема предизбора + + + + You have to hover above a geometry (Preselection) with the mouse to use this command. See documentation for details. + Морате прелазити преко геометрије (предизбора) cа мишем,да би кориcтили ову команду.Погледајте документацију за детаље. + + + + Select one Robot to set home postion + Изабери једног Робота да поcтавиш почетну позицију + + + + Select one Robot + Изабери једног Робота + + + + + Select one Trajectory object. + Одабери један објекат Путање. + + + + set default speed + постави подразумевану брзину + + + + speed: (e.g. 1 m/s or 3 cm/s) + брзина: (e.g. 1 m/s or 3 cm/s) + + + + set default continuity + Поcтави подразумевани континуитет + + + + continuous ? + непрекидно ? + + + + set default acceleration + поcтави подразумевано убрзање + + + + acceleration: (e.g. 1 m/s^2 or 3 cm/s^2) + убрзање: (e.g. 1 m/s^2 or 3 cm/s^2) + + + + Select the Trajectory which you want to dress up. + Одабери Путању коју желиш да опремиш. + + + + No robot files installed + Нема инсталираних робот датотека + + + + Please visit %1 and copy the files to %2 + Молимо, посетите %1 и копирајте датотеке у %2 + + + + RobotGui::DlgTrajectorySimulate + + + Simulation + Симулација + + + + |< + |< + + + + < + < + + + + || + || + + + + |> + |> + + + + > + > + + + + >| + >| + + + + % + % + + + + Type + Тип + + + + Name + Име + + + + C + C + + + + V + V + + + + A + A + + + + RobotGui::TaskEdge2TracParameter + + + TaskEdge2TracParameter + TaskEdge2TracParameter + + + + RobotGui::TaskRobot6Axis + + + Form + Form + + + + A1 + A1 + + + + A2 + A2 + + + + A3 + A3 + + + + A4 + A4 + + + + A5 + A5 + + + + A6 + A6 + + + + TCP: (200.23,300.23,400.23,234,343,343) + TCP: (200.23,300.23,400.23,234,343,343) + + + + Tool: (0,0,400,0,0,0) + Алатка: (0,0,400,0,0,0) + + + + ... + ... + + + + TaskRobot6Axis + TaskRobot6Axis + + + + RobotGui::TaskRobotControl + + + TaskRobotControl + TaskRobotControl + + + + RobotGui::TaskRobotMessages + + + TaskRobotMessages + TaskRobotMessages + + + + RobotGui::TaskTrajectory + + + Form + Form + + + + |< + |< + + + + < + < + + + + || + || + + + + |> + |> + + + + > + > + + + + >| + >| + + + + % + % + + + + 10 ms + 10 мс + + + + 50 ms + 50 мс + + + + 100 ms + 100 мс + + + + 500 ms + 500 мс + + + + 1 s + 1 с + + + + Pos: (200.23, 300.23, 400.23, 234, 343 ,343) + Поз: (200.23, 300.23, 400.23, 234, 343 ,343) + + + + Type + Тип + + + + Name + Име + + + + C + C + + + + V + V + + + + A + A + + + + Trajectory + Trajectory + + + + RobotGui::TaskTrajectoryDressUpParameter + + + Dress Up Parameter + Dress Up Parameter + + + + TaskEdge2TracParameter + + + Form + Form + + + + Hide / Show + Сакриј / Прикажи + + + + Edges: 0 + Ивице: 0 + + + + Cluster: 0 + Јато: 0 + + + + Sizing Value: + Калибриcање Вредноcти: + + + + Use orientation of edge + Користи оријентацију ивице + + + TaskEdge2TracParameter + TaskEdge2TracParameter + + + + TaskRobot6Axis + + TaskRobot6Axis + TaskRobot6Axis + + + + TaskRobotControl + + + Form + Form + + + + X+ + X+ + + + + Y+ + Y+ + + + + Z+ + Z+ + + + + A+ + A+ + + + + B+ + B+ + + + + C+ + C+ + + + + X- + X- + + + + Y- + Y- + + + + Z- + Z- + + + + A- + A- + + + + B- + B- + + + + C- + C- + + + + Tool 0 + Алатка 0 + + + + Tool + Алатка + + + + Base 0 + База 0 + + + + Base + База + + + + World + Свет + + + + 50mm / 5° + 50мм / 5° + + + + 20mm / 2° + 20мм / 2° + + + + 10mm / 1° + 10мм / 1° + + + + 5mm / 0.5° + 5mm / 0.5° + + + + 1mm / 0.1° + 1mm / 0.1° + + + TaskRobotControl + TaskRobotControl + + + + TaskRobotMessages + + + Form + Form + + + + clear + очиcти + + + TaskRobotMessages + TaskRobotMessages + + + + TaskTrajectory + + Trajectory + Trajectory + + + + TaskTrajectoryDressUpParameter + + + Form + Form + + + + Speed & Acceleration: + Брзина & Убрзање: + + + + Speed: + Брзина: + + + + + Use + Користи + + + + Accel: + Убрз: + + + + Don't change Cont + Не мењај Наставак + + + + Continues + Непрекидно + + + + Discontinues + Испрекидано + + + + Position and Orientation: + Позиција и Оријентација: + + + + (0,0,0),(0,0,0) + (0,0,0),(0,0,0) + + + + ... + ... + + + + Don't change Position & Orientation + Не мењај Позицију & Оријентацију + + + + Use Orientation + Користи Оријентацију + + + + Add Position + Додај Позицију + + + + Add Orientation + Додај Оријентацију + + + Dress Up Parameter + Dress Up Parameter + + + + Workbench + + + Robot + Робот + + + + Insert Robots + Уметни Робота + + + + &Robot + &Робот + + + + Export trajectory + Извези путању + + + diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_sv-SE.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_sv-SE.qm index e2360e4ea5..34a46f21e4 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_sv-SE.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_sv-SE.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_sv-SE.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_sv-SE.ts index b9e8d3c2a8..b714efc199 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_sv-SE.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_sv-SE.ts @@ -327,12 +327,12 @@ Dress-up trajectory... - + Dress-up trajectory... Create a dress-up object which overrides some aspects of a trajectory - + Create a dress-up object which overrides some aspects of a trajectory Dress up trajectory... diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_uk.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_uk.qm index e2be698f9a..9dce603307 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_uk.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_uk.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_uk.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_uk.ts index e7155e475f..c2891e4946 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_uk.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_uk.ts @@ -327,12 +327,12 @@ Dress-up trajectory... - + Dress-up trajectory... Create a dress-up object which overrides some aspects of a trajectory - + Create a dress-up object which overrides some aspects of a trajectory Dress up trajectory... @@ -768,7 +768,7 @@ Edges: 0 - Краї: 0 + Ребра: 0 @@ -783,7 +783,7 @@ Use orientation of edge - Використовувати орієнтацію грані + Використовувати орієнтацію ребра TaskEdge2TracParameter diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.qm index 5b883fa8bf..a7ed3490dc 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.ts index 6465054cdc..4910a1b76c 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-CN.ts @@ -327,12 +327,12 @@ Dress-up trajectory... - + Dress-up trajectory... Create a dress-up object which overrides some aspects of a trajectory - + Create a dress-up object which overrides some aspects of a trajectory Dress up trajectory... diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.qm index 814681f9c2..af751207d2 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.ts index 2c5e2e9344..621e8ab9a0 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_zh-TW.ts @@ -327,12 +327,12 @@ Dress-up trajectory... - + 修改軌跡 Create a dress-up object which overrides some aspects of a trajectory - + 建立一個由修改一個軌跡的部份設定之物件 Dress up trajectory... @@ -479,7 +479,7 @@ Select the Trajectory which you want to dress up. - 選擇您想裝飾之軌跡 + 選取您想要修改的軌跡 diff --git a/src/Mod/Ship/resources/Ship.qrc b/src/Mod/Ship/resources/Ship.qrc index 92769d0d6d..9ed0d300be 100644 --- a/src/Mod/Ship/resources/Ship.qrc +++ b/src/Mod/Ship/resources/Ship.qrc @@ -35,5 +35,6 @@ translations/Ship_zh-CN.qm translations/Ship_zh-TW.qm translations/Ship_pt-PT.qm + translations/Ship_sr.qm diff --git a/src/Mod/Ship/resources/translations/Ship_af.qm b/src/Mod/Ship/resources/translations/Ship_af.qm index f6b2e6132f..b1278fd8d3 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_af.qm and b/src/Mod/Ship/resources/translations/Ship_af.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_af.ts b/src/Mod/Ship/resources/translations/Ship_af.ts index b0b677deb5..7ec037a1a0 100644 --- a/src/Mod/Ship/resources/translations/Ship_af.ts +++ b/src/Mod/Ship/resources/translations/Ship_af.ts @@ -4,30 +4,15 @@ Ship - + Ship design Ship design - + Weights Weights - - - Ship Weights names - Ship Weights names - - - - Lightweight - Lightweight - - - - Ship Weights centers of gravity - Ship Weights centers of gravity - True if it is a valid ship instance, False otherwise @@ -54,9 +39,14 @@ Set of external faces of the ship hull - - Ship Weights masses [tons] - Ship Weights masses [tons] + + Set of weight instances + Set of weight instances + + + + Set of tank instances + Set of tank instances @@ -85,15 +75,6 @@ Create a new ship instance on top of the hull geometry - - Ship_CreateSim - - - Ship_CreateTank - - - Ship_GZ - Ship_Hydrostatics @@ -133,75 +114,81 @@ Plots the ship hull outline draw - - Ship_RunSim - - - Ship_StopSim - - - Ship_TrackSim - - - Ship_Weights - ship_areas - + Draft Draft - + Trim Vernou - + Displacement Displacement - + Areas curve tool draft selected [m] Areas curve tool draft selected [m] - + Plot the transversal areas curve Plot the transversal areas curve - + Areas curve tool trim selected [deg] Areas curve tool trim selected [deg] - ship_console + ship_capacity - - Data saved - Data saved + + Tank capacity curve + Tank capacity curve - + + Plot the tank capacity curve (level-volume curve) + Plot the tank capacity curve (level-volume curve) + + + + Plot the tank capacity curve + Plot the tank capacity curve + + + + Number of points + Aantal punte + + + + ship_console + + Please create or load a ship hull geometry before using this tool Please create or load a ship hull geometry before using this tool - + Ship objects can only be created on top of hull geometry (no solid found at selected objects) Ship objects can only be created on top of hull geometry (no solid found at selected objects) - + Computing hydrostatics Computing hydrostatics - + Computing external faces Computing external faces @@ -216,52 +203,42 @@ Any valid ship section found - + Ship objects can only be created on top of hull geometry (no objects selected) Ship objects can only be created on top of hull geometry (no objects selected) - + A ship instance must be selected before using this tool (no objects selected) A ship instance must be selected before using this tool (no objects selected) - + More than one ship have been selected (the extra ships will be ignored) More than one ship have been selected (the extra ships will be ignored) - + A ship instance must be selected before using this tool (no valid ship found at the selected objects) A ship instance must be selected before using this tool (no valid ship found at the selected objects) - + Plot module is disabled, so I cannot perform the plot Plot module is disabled, so I cannot perform the plot - - Failure creating the folder - Failure creating the folder - - - - Failure writing to file - Failure writing to file - - - + A ship instance must be selected before use this tool (no objects selected) A ship instance must be selected before use this tool (no objects selected) - + More than one ship has been selected (just the first one will be used) More than one ship has been selected (just the first one will be used) - + A ship instance must be selected before use this tool (novalid ships found in the selected objects) A ship instance must be selected before use this tool (novalid ships found in the selected objects) @@ -271,14 +248,24 @@ Plot module is disabled, tools cannot graph output curves - + Failure detecting external faces from the ship object Failure detecting external faces from the ship object - - Failure writing the file - Failure writing the file + + A tank instance must be selected before using this tool (no objects selected) + A tank instance must be selected before using this tool (no objects selected) + + + + More than one tank have been selected (the extra tanks will be ignored) + More than one tank have been selected (the extra tanks will be ignored) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + A tank instance must be selected before using this tool (no valid tank found at the selected objects) @@ -309,22 +296,22 @@ Main frame - + Create a new ship Create a new ship - + Length Lengte - + Breadth Breadth - + Draft Draft @@ -332,47 +319,47 @@ ship_hydrostatic - + Plot hydrostatics Plot hydrostatics - + Trim Vernou - + Minimum draft Minimum draft - + Maximum draft Maximum draft - + Number of points Aantal punte - + Hydrostatics tool trim selected Hydrostatics tool trim selected - + Hydrostatics tool minimum draft selected [m] Hydrostatics tool minimum draft selected [m] - + Hydrostatics tool maximum draft selected [m] Hydrostatics tool maximum draft selected [m] - + Hydrostatics tool number of points selected Hydrostatics tool number of points selected @@ -393,72 +380,180 @@ ship_outline - + Outline draw Outline draw - + Auto create Auto create - + Delete all sections Delete all sections - + Create sections Create sections - + Transversal Transversal - + Longitudinal Longitudinal - + Water lines Water lines - + Transversal section positions [m] Transversal section positions [m] - + Longitudinal section positions [m] Longitudinal section positions [m] - + Water line positions [m] Water line positions [m] - shipsim_create + ship_tank + + + True if it is a valid tank instance, False otherwise + True if it is a valid tank instance, False otherwise + + + + Volume of fluid [m^3] + Volume of fluid [m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Create a new tank + Create a new tank + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Tanks objects can only be created on top of its geometry (no objects selected) + + + + No solids found in the selected objects + No solids found in the selected objects + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Ship + Ship + - shipsim_stop - - - shipsim_track - - - shiptank_create - - - shiptank_gz - - - shiptank_weights + ship_weight + + + Create a new ship weight + Create a new ship weight + + + + True if it is a valid weight instance, False otherwise + True if it is a valid weight instance, False otherwise + + + + Mass [kg] + Mass [kg] + + + + Linear density [kg / m] + Linear density [kg / m] + + + + Area density [kg / m^3] + Area density [kg / m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Weight objects can only be created on top of its geometry (no objects selected) + + + + No geometrical shapes found in the selected objects + No geometrical shapes found in the selected objects + + + + Unknow object shapes selected + Unknow object shapes selected + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Create a new weight + Create a new weight + + + + Ship + Ship + + + + Mass + Mass + + + + Linear density + Linear density + + + + Area density + Area density + + + + Density + Density + diff --git a/src/Mod/Ship/resources/translations/Ship_cs.qm b/src/Mod/Ship/resources/translations/Ship_cs.qm index adc389b1b1..7455edd260 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_cs.qm and b/src/Mod/Ship/resources/translations/Ship_cs.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_cs.ts b/src/Mod/Ship/resources/translations/Ship_cs.ts index cf32e451a1..2385fb75c2 100644 --- a/src/Mod/Ship/resources/translations/Ship_cs.ts +++ b/src/Mod/Ship/resources/translations/Ship_cs.ts @@ -4,59 +4,49 @@ Ship - + Ship design Návrh lodi - + Weights Hmotnosti - - - Ship Weights names - Názvy hmotností lodi - - - - Lightweight - Lehký - - - - Ship Weights centers of gravity - Ship Weights centers of gravity - True if it is a valid ship instance, False otherwise - True if it is a valid ship instance, False otherwise + True pokud je vybrána platná instance lodi, jinak False Ship length [m] - Ship length [m] + Délka lodi [m] Ship breadth [m] - Ship breadth [m] + Šířka lodi [m] Ship draft [m] - Ship draft [m] + Ponor lodi [m] Set of external faces of the ship hull - Set of external faces of the ship hull + Sada vnějších ploch trupu lodi - - Ship Weights masses [tons] - Ship Weights masses [tons] + + Set of weight instances + Set of weight instances + + + + Set of tank instances + Set of tank instances @@ -69,7 +59,7 @@ Plot the transversal areas curve - Plot the transversal areas curve + Vykreslí křivku příčných průřezových ploch @@ -82,18 +72,9 @@ Create a new ship instance on top of the hull geometry - Create a new ship instance on top of the hull geometry + Vytvoří novou instanci lodi na geometrii trupu - - Ship_CreateSim - - - Ship_CreateTank - - - Ship_GZ - Ship_Hydrostatics @@ -104,7 +85,7 @@ Plot the ship hydrostatics - Plot the ship hydrostatics + Vykreslí hydrostatiku lodi @@ -117,7 +98,7 @@ Load an example ship hull geometry. - Load an example ship hull geometry. + Otevře příklad geometrie trupu lodi. @@ -125,85 +106,91 @@ Outline draw - Outline draw + Kreslení obrysu Plots the ship hull outline draw - Plots the ship hull outline draw + Vykreslí řezy obrysu trupu lodi - - Ship_RunSim - - - Ship_StopSim - - - Ship_TrackSim - - - Ship_Weights - ship_areas - + Draft Zkosení - + Trim - Trim + Oříznout - + Displacement Posunutí - + Areas curve tool draft selected [m] - Areas curve tool draft selected [m] + Vybrán nástroj Křivka ploch [m] - + Plot the transversal areas curve - Plot the transversal areas curve + Vykreslí křivku příčných průřezových ploch - + Areas curve tool trim selected [deg] - Areas curve tool trim selected [deg] + Vybrán nástroj průřezových křivek [deg] + + + + ship_capacity + + + Tank capacity curve + Tank capacity curve + + + + Plot the tank capacity curve (level-volume curve) + Plot the tank capacity curve (level-volume curve) + + + + Plot the tank capacity curve + Plot the tank capacity curve + + + + Number of points + Počet bodů ship_console - - Data saved - Data uložena - - - + Please create or load a ship hull geometry before using this tool - Please create or load a ship hull geometry before using this tool + Prosím, vytvořte nebo otevřete geometrii trupu lodi před použitím tohoto nástroje - + Ship objects can only be created on top of hull geometry (no solid found at selected objects) - Ship objects can only be created on top of hull geometry (no solid found at selected objects) + Lodní objekty mohou být vytvořeny pouze na geometrii trupu (mezi vybranými objekty nebylo nalezeno těleso) - + Computing hydrostatics Počítaní hydrostatiky - + Computing external faces - Computing external faces + Výpočet vnějších ploch @@ -213,57 +200,47 @@ Any valid ship section found - Any valid ship section found + Nebyl nalezen platný řez lodi - + Ship objects can only be created on top of hull geometry (no objects selected) - Ship objects can only be created on top of hull geometry (no objects selected) + Lodní objekty mohou být vytvořeny pouze na geometrii trupu (nebyl vybrán žádný objekt) - + A ship instance must be selected before using this tool (no objects selected) - A ship instance must be selected before using this tool (no objects selected) + Musí být vybrána instance lodi před použitím tohoto nástroje (nebyl vybrán žádný objekt) - + More than one ship have been selected (the extra ships will be ignored) - More than one ship have been selected (the extra ships will be ignored) + Je vybráno více než jedna loď (lodě navíc budou ignorovány) - + A ship instance must be selected before using this tool (no valid ship found at the selected objects) - A ship instance must be selected before using this tool (no valid ship found at the selected objects) + Musí být vybrána instance lodi před použitím tohoto nástroje (ve vybraných objektech není platná loď) - + Plot module is disabled, so I cannot perform the plot modul Graf je deaktivován, nemohu vykresit graf - - Failure creating the folder - Failure creating the folder - - - - Failure writing to file - Failure writing to file - - - + A ship instance must be selected before use this tool (no objects selected) - A ship instance must be selected before use this tool (no objects selected) + Musí být vybrána instance lodi před použitím tohoto nástroje (nebyl vybrán žádný objekt) - + More than one ship has been selected (just the first one will be used) - More than one ship has been selected (just the first one will be used) + Je vybráno více než jedna loď (bude použita první z nich) - + A ship instance must be selected before use this tool (novalid ships found in the selected objects) - A ship instance must be selected before use this tool (novalid ships found in the selected objects) + Musí být vybrána instance lodi před použitím tohoto nástroje (ve vybraných objektech byla nalezena neplatná loď) @@ -271,14 +248,24 @@ modul Graf je deaktivován, nástroj nemůže vykreslit výsledné křivky - + Failure detecting external faces from the ship object - Failure detecting external faces from the ship object + Selhala detekce vnějších ploch z objektu lodi - - Failure writing the file - Failure writing the file + + A tank instance must be selected before using this tool (no objects selected) + A tank instance must be selected before using this tool (no objects selected) + + + + More than one tank have been selected (the extra tanks will be ignored) + More than one tank have been selected (the extra tanks will be ignored) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + A tank instance must be selected before using this tool (no valid tank found at the selected objects) @@ -309,22 +296,22 @@ Hlavní žebro - + Create a new ship Vytvořit novou loď - + Length Délka - + Breadth Šíře - + Draft Zkosení @@ -332,47 +319,47 @@ ship_hydrostatic - + Plot hydrostatics Nakreslit hydrostatiky - + Trim - Trim + Oříznout - + Minimum draft Minimální ponor - + Maximum draft Maximální ponor - + Number of points Počet bodů - + Hydrostatics tool trim selected Hydrostatický nástroj ořezu vybrán - + Hydrostatics tool minimum draft selected [m] Hydrostatický nástroj minimálního ponoru vybrán [m] - + Hydrostatics tool maximum draft selected [m] Hydrostatický nástroj maximálního ponoru vybrán [m] - + Hydrostatics tool number of points selected Hydrostatický nástroj počtu bodů vybrán @@ -393,72 +380,180 @@ ship_outline - + Outline draw - Outline draw + Kreslení obrysu - + Auto create Automatické vytvoření - + Delete all sections Vymazat všechny průřezy - + Create sections Vytvořit průřezy - + Transversal Příčný - + Longitudinal Podélné - + Water lines Vodorysky - + Transversal section positions [m] - Transversal section positions [m] + Pozice příčných průřezů [m] - + Longitudinal section positions [m] Podélný řez poloha [m] - + Water line positions [m] - Water line positions [m] + Poloha vodní hladiny [m] - shipsim_create + ship_tank + + + True if it is a valid tank instance, False otherwise + True if it is a valid tank instance, False otherwise + + + + Volume of fluid [m^3] + Volume of fluid [m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Create a new tank + Create a new tank + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Tanks objects can only be created on top of its geometry (no objects selected) + + + + No solids found in the selected objects + No solids found in the selected objects + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Ship + Ship + - shipsim_stop - - - shipsim_track - - - shiptank_create - - - shiptank_gz - - - shiptank_weights + ship_weight + + + Create a new ship weight + Create a new ship weight + + + + True if it is a valid weight instance, False otherwise + True if it is a valid weight instance, False otherwise + + + + Mass [kg] + Mass [kg] + + + + Linear density [kg / m] + Linear density [kg / m] + + + + Area density [kg / m^3] + Area density [kg / m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Weight objects can only be created on top of its geometry (no objects selected) + + + + No geometrical shapes found in the selected objects + No geometrical shapes found in the selected objects + + + + Unknow object shapes selected + Unknow object shapes selected + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Create a new weight + Create a new weight + + + + Ship + Ship + + + + Mass + Mass + + + + Linear density + Linear density + + + + Area density + Area density + + + + Density + Density + diff --git a/src/Mod/Ship/resources/translations/Ship_de.qm b/src/Mod/Ship/resources/translations/Ship_de.qm index 6a1e10c708..8caef772a7 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_de.qm and b/src/Mod/Ship/resources/translations/Ship_de.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_de.ts b/src/Mod/Ship/resources/translations/Ship_de.ts index 2bc83ffcfd..fc7c060db6 100644 --- a/src/Mod/Ship/resources/translations/Ship_de.ts +++ b/src/Mod/Ship/resources/translations/Ship_de.ts @@ -1,864 +1,559 @@ - + Ship - - True if is a valid ship tank instance - Erfüllt wenn es eine gültige Schiffstank-Instanz ist - - - - Fluid filling level percentage - Fluid filling level percentage - - - - Inside fluid density - Inside fluid density - - - - True if is a valid ship simulation instance - True if is a valid ship simulation instance - - - - Waves (Amplitude,period,phase) - Waves (Amplitude,period,phase) - - - - Waves direction (0 deg to stern waves) - Waves direction (0 deg to stern waves) - - - - Free surface number of elements at x direction - Free surface number of elements at x direction - - - - Free surface number of elements at y direction - Free surface number of elements at y direction - - - - Free surface elements position - Free surface elements position - - - - Free surface elements area - Free surface elements area - - - - Free surface elements normal - Free surface elements normal - - - - Ship - Schiff - - - - Ship module provides some of the commonly used tool to design ship forms - Ship module provides some of the commonly used tool to design ship forms - - - + Ship design - Schiffsdesign + Schiffsdesign - + Weights - Gewichte + Massen - - Simulation - Simulation + + True if it is a valid ship instance, False otherwise + True, wenn es eine gültige Schiff-Instanz ist, ansonsten false - - True if is a valid ship instance - True if is a valid ship instance + + Ship length [m] + Schiffslänge [m] - - Ship Weights names - Ship Weights names + + Ship breadth [m] + Schiffsbreite [m] - - Lightweight - Lightweight + + Ship draft [m] + Schiffsentwurf [m] - - Ship Weights masses - Ship Weights masses + + Set of external faces of the ship hull + Satz von externen Flächen des Schiffsrumpfes - - Ship Weights centers of gravity - Ship Weights centers of gravity + + Set of weight instances + Menge von Massen + + + + Set of tank instances + Menge von Tanks Ship_AreasCurve - + Areas curve - Areas curve + Flächeninhalt Kurvenlinie - - Plot transversal areas curve - Plot transversal areas curve + + Plot the transversal areas curve + Schaubild der transversal Flächenkurve erstellen Ship_CreateShip - + Create a new ship - Create a new ship + Erstelle ein neues Schiff - - Create a new ship in order to work with them - Create a new ship in order to work with them - - - - Ship_CreateSim - - - Create a new simulation - Create a new simulation - - - - Create a new simulation in order to process later - Create a new simulation in order to process later - - - - Ship_CreateTank - - - Create a new tank - Create a new tank - - - - Create a new ship tank - Create a new ship tank - - - - Ship_GZ - - - GZ curve - GZ curve - - - - Transversal stability GZ curve computation - Transversal stability GZ curve computation + + Create a new ship instance on top of the hull geometry + Erstelle eine neue Schiffsinstanz über der Rumpfgeometrie Ship_Hydrostatics - + Hydrostatics - Hydrostatics + Hydrostatik - - Plot ship hydrostatics - Plot ship hydrostatics + + Plot the ship hydrostatics + Plot der Schiff-Hydrostatik Ship_LoadExample - + Load an example ship geometry - Load an example ship geometry + Lade ein Beispiel einer Schiffsgeometrie - - Load an example ship geometry able to be converted into a ship. - Load an example ship geometry able to be converted into a ship. + + Load an example ship hull geometry. + Lade eine Beispiel Schiffsrumpfgeometrie. Ship_OutlineDraw - + Outline draw - Outline draw + Kontur Ansicht - - Plot ship outline draw - Plot ship outline draw - - - - Ship_RunSim - - - Run a simulation - Führe eine Simulation durch - - - - Ship_StopSim - - - Stop active simulation - Stop active simulation - - - - Ship_TrackSim - - - Track simulation - Track simulation - - - - Ship_Weights - - - Set ship weights - Set ship weights - - - - Set ship weights, tanks must be added later - Set ship weights, tanks must be added later + + Plots the ship hull outline draw + Drucken der Schiffs-Umriss-Zeichnung ship_areas - - Plot transversal areas curve - Plot transversal areas curve - - - + Draft - Draft + Tiefgang - + Trim - Trim + Beschneiden - + Displacement - Displacement + Verdrängung - + Areas curve tool draft selected [m] - Areas curve tool draft selected [m] + Ausgewähltes Flächenkurvenwerkzeug: Entwurf [m] - - Areas curve tool trim selected - Areas curve tool trim selected + + Plot the transversal areas curve + Schaubild der transversal Flächenkurve erstellen + + + + Areas curve tool trim selected [deg] + Beschneidung für Flächenkurvenwerkzeug ausgewählt [Grad] + + + + ship_capacity + + + Tank capacity curve + Tankkapazitätskurve + + + + Plot the tank capacity curve (level-volume curve) + Zeichne die Tankkapazitätskurve (Füllstand-Volumen Kurve) + + + + Plot the tank capacity curve + Zeichne die Tankkapazitätskurve + + + + Number of points + Anzahl der Punkte ship_console - - - Plot module is disabled, can't perform plot - Plot module is disabled, can't perform plot - - - - Can't create folder - Can't create folder - - - - Can't write to file - Can't write to file - - - - Data saved - Data saved - - - - Ship instance must be selected (no object selected) - Ship instance must be selected (no object selected) - - - - More than one ship selected (extra ships will be neglected) - More than one ship selected (extra ships will be neglected) - - Ship instance must be selected (no valid ship found at selected objects) - Ship instance must be selected (no valid ship found at selected objects) - - - - Ussually you don't want to modify manually this option - Ussually you don't want to modify manually this option - - - - Object is not a valid ship simulation - Object is not a valid ship simulation - - - - Object is not a ship simulation - Object is not a ship simulation - - - - Can't find any active simulation - Can't find any active simulation - - - - Ship objects can only be created on top of hull geometry (any object selected) - Ship objects can only be created on top of hull geometry (any object selected) - - - Please create or load a ship hull geometry before using this tool - Please create or load a ship hull geometry before using this tool + Bitte erstellen oder laden Sie eine Rumpfgeometrie bevor Sie dieses Werkzeug verwenden - + Ship objects can only be created on top of hull geometry (no solid found at selected objects) - Ship objects can only be created on top of hull geometry (no solid found at selected objects) + Schiffs-Objekte können nur oberhalb der Rumpf Geometrie erstellt werden (keine Volumenkörper unter den gewählten Objekten) - - Plot module is disabled, tools can't graph output curves - Plot module is disabled, tools can't graph output curves - - - - pyOpenCL not installed, simulations stuff will disabled therefore - pyOpenCL not installed, simulations stuff will disabled therefore - - - - numpy not installed, simulations stuff will disabled therefore - numpy not installed, simulations stuff will disabled therefore - - - - Can't detect external faces from ship object - Can't detect external faces from ship object - - - + Computing hydrostatics - Computing hydrostatics + Berechnung der Hydrostatik - + Computing external faces - Computing external faces + Berechnung der äusseren Flächen - - Initializating - Initializating - - - - Iterating - Iterating - - - - Generating linear system matrix - Generating linear system matrix - - - - Solving linear systems - Solving linear systems - - - - Time integrating - Time integrating - - - - Building data - Building data - - - - Launching simulation - Launching simulation - - - - Done - Done - - - - Ship simulation instance must be selected (no object selected) - Ship simulation instance must be selected (no object selected) - - - - More than one ship simulation selected (extra simulations will be neglected) - More than one ship simulation selected (extra simulations will be neglected) - - - - Ship simulation instance must be selected (no valid simulation found at selected objects) - Ship simulation instance must be selected (no valid simulation found at selected objects) - - - - Can't find OpenCL devices - Can't find OpenCL devices - - - - Simulation already stopped - Simulation already stopped - - - - Any active simulation to stop - Any active simulation to stop - - - - Simulation will stop at the end of actual iteration - Simulation will stop at the end of actual iteration - - - - Computing GZ - Computing GZ - - - - Ship weights has not been set. You need to set weights before use this tool - Ship weights has not been set. You need to set weights before use this tool - - - - Performing plot - Performing plot - - - + Computing sections - Computing sections + Berechne Abschnitte - + Any valid ship section found - Any valid ship section found - - - - Tank has not been created - Tank has not been created - - - - Tank objects can only be created on top of structure geometry (no object selected) - Tank objects can only be created on top of structure geometry (no object selected) - - - - Please create a tank geometry before using this tool - Please create a tank geometry before using this tool + Keine gültigen Schiffsabschnitte gefunden - Tank objects can only be created on top of structure geometry (no solids can't be computed) - Tank objects can only be created on top of structure geometry (no solids can't be computed) + Ship objects can only be created on top of hull geometry (no objects selected) + Schiffs-Objekte können nur oberhalb der Rumpf Geometrie erstellt werden (beliebiges Objekt ausgewählt) + + + + A ship instance must be selected before using this tool (no objects selected) + Eine Schiff-Instanz muss aktiviert sein, bevor Sie dieses Tool benutzen können (keine Objekte ausgewählt) + + + + More than one ship have been selected (the extra ships will be ignored) + Mehr als ein Schiff wurde ausgewählt (die zusätzliche Schiffe werden ignoriert) + + + + A ship instance must be selected before using this tool (no valid ship found at the selected objects) + Eine Schiff-Instanz muss gewählt sein, bevor Sie dieses Tool benutzen können (keine gültiges Schiff bei den ausgewählten Objekten gefunden) + + + + Plot module is disabled, so I cannot perform the plot + Druck-Modul deaktiviert, Druck kann nicht ausgeführt werden + + + + A ship instance must be selected before use this tool (no objects selected) + Eine Schiff-Instanz muss aktiviert sein, bevor Sie dieses Tool benutzen können (keine Objekte ausgewählt) + + + + More than one ship has been selected (just the first one will be used) + Mehr als ein Schiff wurde ausgewählt (nur das erste wird verwendet) + + + + A ship instance must be selected before use this tool (novalid ships found in the selected objects) + Eine Schiff-Instanz muss gewählt sein, bevor Sie dieses Tool benutzen können (keine gültiges Schiff bei den ausgewählten Objekten gefunden) + + + + Plot module is disabled, tools cannot graph output curves + Plot-Modul deaktiviert, Tools können die Ausgabe-Kurven nicht zeichnen + + + + Failure detecting external faces from the ship object + Fehler beim Erkennen der externen Flächen des Schiffs-Objektes + + + + A tank instance must be selected before using this tool (no objects selected) + Ein Tank muss ausgewählt sein, bevor dieses Werkzeug verwendet werden kann (kein Objekt ausgewählt) + + + + More than one tank have been selected (the extra tanks will be ignored) + Mehr als ein Tank ist ausgewählt (die zusätzlichen Tanks werden ignoriert) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + Ein Tank muss ausgewählt sein, bevor dieses Werkzeug verwendet werden kann (kein gültiger Tank bei den ausgewählten Objekten gefunden) ship_create - + Base line - Base line + Grundlinie - + Free surface - Free surface - - - - Forward perpendicular - Forward perpendicular - - - - After perpendicular - After perpendicular + Freifläche + Forward perpendicular + Rechtwinklig vorwärts + + + + After perpendicular + Rechtwinklig rückwärts + + + Main frame - Main frame + Hauptrahmen - + Create a new ship - Create a new ship + Erstelle ein neues Schiff - + Length - Länge + Länge - + Breadth - Breadth + Breite - + Draft - Draft + Tiefgang ship_hydrostatic - + Plot hydrostatics - Plot hydrostatics + Zeichne Hydrostatik - + Trim - Trim + Beschneiden - + Minimum draft - Minimum draft + Minimaler Tiefgang - + Maximum draft - Maximum draft + Maximaler Tiefgang - + Number of points - Anzahl der Punkte + Anzahl der Punkte - + Hydrostatics tool trim selected - Hydrostatics tool trim selected + Hydrostatik-Werkzeug Beschneidung ausgewählt - + Hydrostatics tool minimum draft selected [m] - Hydrostatics tool minimum draft selected [m] + Hydrostatikwerkzeug für minimalen Tiefgang ausgewählt [m] - + Hydrostatics tool maximum draft selected [m] - Hydrostatics tool maximum draft selected [m] + Hydrostatikwerkzeug für maximalen Tiefgang ausgewählt [m] - + Hydrostatics tool number of points selected - Hydrostatics tool number of points selected + Hydrostatik-Werkzeug ausgewählt: Anzahl Punkte ship_load - + Load example ship - Load example ship + Beispiel Schiff laden - + Select ship example geometry - Select ship example geometry + Wählen Sie Schiffs Beispiel Geometrie ship_outline - + Outline draw - Outline draw - - - - Auto create - Auto create - - - - Scale - Skalieren - - - - Delete all sections - Delete all sections - - - - Create sections - Create sections - - - - Transversal - Transversal - - - - Longitudinal - Longitudinal - - - - Water lines - Water lines - - - - Transversal sections position [m] - Transversal sections position [m] - - - - Longitudinal sections position [m] - Longitudinal sections position [m] - - - - Water lines position [m] - Water lines position [m] - - - - Plot scale (1:scale format) - Plot scale (1:scale format) - - - - shipsim_create - - - Create a new ship simulation - Create a new ship simulation - - - - Free surface - Free surface - - - - Length - Länge - - - - Breadth - Breadth - - - - Number of points - Anzahl der Punkte - - - - Waves - Waves - - - - Amplitude - Amplitude - - - - Period - Period - - - - Phase - Phase - - - - Heading - Heading - - - - shipsim_stop - - - Run the simulation - Run the simulation - - - - Simulation time - Simulation time - - - - Output - Ausgabe - - - - OpenCL device - OpenCL device - - - - shipsim_track - - - Track simulation - Track simulation - - - - Now - Now - - - - shiptank_create - - - Create a new tank - Create a new tank - - - - Filling level - Filling level - - - - Fluid density - Fluid density - - - - shiptank_gz - - - Draft - Draft - - - - GZ curve computation - GZ curve computation - - - - Loading condition - Loading condition - - - - Roll angles - Roll angles - - - - Trim - Trim - - - - Start - Start + Kontur Ansicht - End - End + Auto create + Automatisch erstellen - - Number of points - Anzahl der Punkte - - - - Displacement - Displacement - - - - Press update to compute - Press update to compute + + Delete all sections + Lösche alle Abschnitte - Update displacement and draft - Update displacement and draft + Create sections + Erstelle Abschnitte + + + + Transversal + Transversal + + + + Longitudinal + Longitudinal + + + + Water lines + Wasserlinien + + + + Transversal section positions [m] + Position der transversalen Abschnitte [m] + + + + Longitudinal section positions [m] + Position der longitudinalen Abschnitte [m] + + + + Water line positions [m] + Position der Wasserlinien [m] - shiptank_weights + ship_tank - - Set weights - Set weights + + True if it is a valid tank instance, False otherwise + Wahr falls es ein gültiger Tank ist, Falsch sonst - - Name - Name + + Volume of fluid [m^3] + Volumen der Flüssigkeit [m^3] - + + Density [kg / m^3] + Dichte [kg / m^3] + + + + Create a new tank + Erstelle einen neuen Tank + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Tanks können nur in ihren Geometrien erstellt werden (kein Objekt ausgewählt) + + + + No solids found in the selected objects + Kein Volumenkörper im ausgewähltem Objekt vorhanden + + + + There are not ship objects to create weights into them + Es existieren keine Schiff Objekte um Massen in ihnen zu erstellen + + + + Ship + Schiff + + + + ship_weight + + + Create a new ship weight + Erstellt eine neue Schiffsmasse + + + + True if it is a valid weight instance, False otherwise + True wenn es eine valide Masse ist, False andernfalls + + + + Mass [kg] + Masse [kg] + + + + Linear density [kg / m] + längenbezogene Masse [kg/m] + + + + Area density [kg / m^3] + flächenbezogene Masse [kg / m^3] + + + + Density [kg / m^3] + Dichte [kg / m^3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Massen können nur in ihren Geometrien erstellt werden (kein Objekt ausgewählt) + + + + No geometrical shapes found in the selected objects + Keine geometrischen Formen im ausgewählten Objekt gefunden + + + + Unknow object shapes selected + Unbekannte Formen ausgewählt + + + + There are not ship objects to create weights into them + Es existieren keine Schiff Objekte um Massen in ihnen zu erstellen + + + + Create a new weight + Erstellt eine neue Masse + + + + Ship + Schiff + + + Mass - Mass + Masse + + + + Linear density + längenbezogene Masse + + + + Area density + flächenbezogene Masse + + + + Density + Dichte diff --git a/src/Mod/Ship/resources/translations/Ship_es-ES.qm b/src/Mod/Ship/resources/translations/Ship_es-ES.qm index c33b04ff6c..84d0895494 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_es-ES.qm and b/src/Mod/Ship/resources/translations/Ship_es-ES.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_es-ES.ts b/src/Mod/Ship/resources/translations/Ship_es-ES.ts index c958a87467..952929f342 100644 --- a/src/Mod/Ship/resources/translations/Ship_es-ES.ts +++ b/src/Mod/Ship/resources/translations/Ship_es-ES.ts @@ -4,34 +4,19 @@ Ship - + Ship design Diseño naval - + Weights Pesos - - - Ship Weights names - Nombres de los Pesos del Barco - - - - Lightweight - Peso en rosca - - - - Ship Weights centers of gravity - Centros de gravedad de los pesos del barco - True if it is a valid ship instance, False otherwise - True if it is a valid ship instance, False otherwise + Verdadero si es una una instancia del tanque válida. Falso de lo contrario @@ -41,22 +26,27 @@ Ship breadth [m] - Ship breadth [m] + Manga del barco [m] Ship draft [m] - Ship draft [m] + Calado del barco [m] Set of external faces of the ship hull - Set of external faces of the ship hull + Conjunto de caras externas del casco del barco - - Ship Weights masses [tons] - Ship Weights masses [tons] + + Set of weight instances + Conjunto de instancias de peso + + + + Set of tank instances + Conjunto de instancias del tanque @@ -82,18 +72,9 @@ Create a new ship instance on top of the hull geometry - Create a new ship instance on top of the hull geometry + Crear una nueva instancia de barco en lo alto de la geometría del casco - - Ship_CreateSim - - - Ship_CreateTank - - - Ship_GZ - Ship_Hydrostatics @@ -133,75 +114,81 @@ Dibuja el contorno del casco - - Ship_RunSim - - - Ship_StopSim - - - Ship_TrackSim - - - Ship_Weights - ship_areas - + Draft Calado - + Trim Recortar - + Displacement Desplazamiento - + Areas curve tool draft selected [m] calado [m] para calcular la curva de áreas - + Plot the transversal areas curve Trazar la curva de áreas transversales - + Areas curve tool trim selected [deg] Herramienta para ajustar las curvas de área seleccionadas [grados] - ship_console + ship_capacity - - Data saved - Datos guardados + + Tank capacity curve + Curva de capacidad del tanque - + + Plot the tank capacity curve (level-volume curve) + Trazar la curva de capacidad del tanque (curva de nivel de volumen) + + + + Plot the tank capacity curve + Trazar la curva de capacidad del tanque + + + + Number of points + Número de puntos + + + + ship_console + + Please create or load a ship hull geometry before using this tool Por favor, cree o cargue una geometría de casco de barco antes de usar esta herramienta - + Ship objects can only be created on top of hull geometry (no solid found at selected objects) Sólo se pueden crear objetos de barco sobre la geometría del casco (no sólido encontrado en los objetos seleccionados) - + Computing hydrostatics Calculando hidrostática - + Computing external faces Calculando caras externas @@ -216,69 +203,69 @@ Cualquier sección válida del barco encontrada - + Ship objects can only be created on top of hull geometry (no objects selected) - Ship objects can only be created on top of hull geometry (no objects selected) + Sólo se pueden crear objetos de barco sobre la geometría del casco (ningún objeto seleccionado) - + A ship instance must be selected before using this tool (no objects selected) Se debe elegir un objeto ship antes de usar esta herramienta (ninguno seleccionado) - + More than one ship have been selected (the extra ships will be ignored) Se han seleccionado más de una nave (se ignorarán las naves adicionales) - + A ship instance must be selected before using this tool (no valid ship found at the selected objects) Un objeto ship debe seleccionarse antes de utilizar esta herramienta (no se ha encontrado ninguno entre la selección) - + Plot module is disabled, so I cannot perform the plot El módulo de trazado de gráficos está desactivado, no se pueden dibujar gráficos - - Failure creating the folder - Error al crear la carpeta - - - - Failure writing to file - Error al escribir a un archivo - - - + A ship instance must be selected before use this tool (no objects selected) Se debe elegir un objeto ship antes de usar esta herramienta (ninguno seleccionado) - + More than one ship has been selected (just the first one will be used) Se ha seleccionado más de una nave (sólo la primera de ellas se utilizará) - + A ship instance must be selected before use this tool (novalid ships found in the selected objects) - A ship instance must be selected before use this tool (novalid ships found in the selected objects) + Se debe seleccionar una instancia de barco antes de usar esta herramienta (no se ha encontrado ninguna en los objetos seleccionados) Plot module is disabled, tools cannot graph output curves - Plot module is disabled, tools cannot graph output curves + El módulo de gráficas no está habilitado, las herramientas no pueden representar las curvas de salida - + Failure detecting external faces from the ship object - Failure detecting external faces from the ship object + Fallo detectando las caras externas del objeto barco - - Failure writing the file - Failure writing the file + + A tank instance must be selected before using this tool (no objects selected) + Una instancia del tanque debe seleccionarse antes de utilizar esta herramienta (no objetos seleccionados) + + + + More than one tank have been selected (the extra tanks will be ignored) + Más de uno de los tanques han sido seleccionados (se omitirán los tanques adicionales) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + Una instancia del tanque debe seleccionarse antes de utilizar esta herramienta (sin tanque válido en los objetos seleccionados) @@ -309,22 +296,22 @@ Cuaderna maestra - + Create a new ship Crear un nuevo barco - + Length Longitud - + Breadth Manga - + Draft Calado @@ -332,47 +319,47 @@ ship_hydrostatic - + Plot hydrostatics Trazar hidrostática - + Trim Recortar - + Minimum draft Calado mínimo - + Maximum draft Calado máximo - + Number of points Número de puntos - + Hydrostatics tool trim selected trimado para el cálculo de hidrostáticas - + Hydrostatics tool minimum draft selected [m] calado mínimo para el cálculo de hidrostáticas [m] - + Hydrostatics tool maximum draft selected [m] calado máximo para el cálculo de hidrostáticas [m] - + Hydrostatics tool number of points selected número de puntos para calcular las hidrostáticas @@ -393,72 +380,180 @@ ship_outline - + Outline draw Dibujo del contorno - + Auto create Auto crear - + Delete all sections Eliminar todas las secciones - + Create sections Crear secciones - + Transversal Transversal - + Longitudinal Longitudinal - + Water lines Líneas de agua - + Transversal section positions [m] - Transversal section positions [m] + Posición de las secciones transversales [m] - + Longitudinal section positions [m] - Longitudinal section positions [m] + Posición de las secciones longitudinal [m] - + Water line positions [m] - Water line positions [m] + Posiciones de las líneas de agua [m] - shipsim_create + ship_tank + + + True if it is a valid tank instance, False otherwise + Verdadero si es una una instancia del tanque válida. Falso de lo contrario + + + + Volume of fluid [m^3] + Volumen de líquido [m ^ 3] + + + + Density [kg / m^3] + Densidad [kg / m ^ 3] + + + + Create a new tank + Crea un nuevo depósito + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Los objetos de deposito sólo se pueden crear en la parte superior de su geometría (no hay objetos seleccionados) + + + + No solids found in the selected objects + No hay sólidos encontrados en los objetos seleccionados + + + + There are not ship objects to create weights into them + No hay objetos de envio para crear peso en ellos + + + + Ship + Nave + - shipsim_stop - - - shipsim_track - - - shiptank_create - - - shiptank_gz - - - shiptank_weights + ship_weight + + + Create a new ship weight + Crear un nuevo peso de la nave + + + + True if it is a valid weight instance, False otherwise + Verdad si es una una instancia del tanque válida. Falso de lo contrario + + + + Mass [kg] + Masa [kg] + + + + Linear density [kg / m] + Densidad lineal [kg / m] + + + + Area density [kg / m^3] + Área de densidad [kg / m ^ 3] + + + + Density [kg / m^3] + Densidad [kg / m ^ 3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Sólo se pueden crear objetos de peso en la cima de su geometría (ningún objeto seleccionado) + + + + No geometrical shapes found in the selected objects + No hay formas geométricas encontradas en los objetos seleccionados + + + + Unknow object shapes selected + Formas de objetos desconocidos seleccionados + + + + There are not ship objects to create weights into them + No hay objetos de envio para crear peso en ellos + + + + Create a new weight + Crear un nuevo peso + + + + Ship + Nave + + + + Mass + Masa + + + + Linear density + Densidad lineal + + + + Area density + Área de densidad + + + + Density + Densidad + diff --git a/src/Mod/Ship/resources/translations/Ship_fi.qm b/src/Mod/Ship/resources/translations/Ship_fi.qm index 7e7b2c6fca..e124b37ee0 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_fi.qm and b/src/Mod/Ship/resources/translations/Ship_fi.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_fi.ts b/src/Mod/Ship/resources/translations/Ship_fi.ts index f360337ddf..7b6d5d9888 100644 --- a/src/Mod/Ship/resources/translations/Ship_fi.ts +++ b/src/Mod/Ship/resources/translations/Ship_fi.ts @@ -4,59 +4,49 @@ Ship - + Ship design - Laivan suunnittelu + Aluksen suunnittelu - + Weights - Massat - - - - Ship Weights names - Lauvan painojen nimet - - - - Lightweight - Kevyt - - - - Ship Weights centers of gravity - Aluksen painojen painopisteet + Painot True if it is a valid ship instance, False otherwise - True if it is a valid ship instance, False otherwise + Tosi, jos se on voimassa oleva aluksen ilmentymä, muuten epätosi Ship length [m] - Ship length [m] + Aluksen pituus [m] Ship breadth [m] - Ship breadth [m] + Aluksen leveys [m] Ship draft [m] - Ship draft [m] + Aluksen vedos [m] Set of external faces of the ship hull - Set of external faces of the ship hull + Aluksen rungon ulkopinnat -joukko - - Ship Weights masses [tons] - Ship Weights masses [tons] + + Set of weight instances + Joukko painoesiintymiä + + + + Set of tank instances + Säiliö esiintymien joukko @@ -69,7 +59,7 @@ Plot the transversal areas curve - Plot the transversal areas curve + Piirretään poikittaisten alueiden käyrä @@ -82,18 +72,9 @@ Create a new ship instance on top of the hull geometry - Create a new ship instance on top of the hull geometry + Luo rungon geometrian päälle uusi aluksen ilmentymä - - Ship_CreateSim - - - Ship_CreateTank - - - Ship_GZ - Ship_Hydrostatics @@ -104,7 +85,7 @@ Plot the ship hydrostatics - Plot the ship hydrostatics + Piirrä aluksen hydrostatiikka @@ -117,7 +98,7 @@ Load an example ship hull geometry. - Load an example ship hull geometry. + Lataa aluksen rungon geometriasta esimerkki. @@ -130,78 +111,84 @@ Plots the ship hull outline draw - Plots the ship hull outline draw + Tulostaa aluksen rungon ääriviivapiirroksen - - Ship_RunSim - - - Ship_StopSim - - - Ship_TrackSim - - - Ship_Weights - ship_areas - + Draft - Vesirajasta pohjaan + Vedos (vesirajasta pohjaan) - + Trim rajaa - + Displacement Uppouma - + Areas curve tool draft selected [m] - Alueiden käyrien luonnostyökalu valittu [m] + Alueiden käyrien vedostyökalu valittu [m] - + Plot the transversal areas curve - Plot the transversal areas curve + Piirretään poikittaisten alueiden käyrä - + Areas curve tool trim selected [deg] - Areas curve tool trim selected [deg] + Alueiden käyrien työkalu: rajaus valittuna [deg] + + + + ship_capacity + + + Tank capacity curve + Säiliön työkapasiteetin käyrä + + + + Plot the tank capacity curve (level-volume curve) + Piirrä säiliöpasiteetin käyrä (taso-tilavuus käyrä) + + + + Plot the tank capacity curve + Piirrä säiliöpasiteetin käyrä + + + + Number of points + Pisteiden määrä ship_console - - Data saved - Tiedot tallennettu - - - + Please create or load a ship hull geometry before using this tool Luo tai Lataa aluksen rungon geometrian ennen tämän työkalun käyttöä - + Ship objects can only be created on top of hull geometry (no solid found at selected objects) Laiva objekteja voidaan luoda vain runkogeometrian päälle (yhtään monitahokasta ei löytynyt valittujen objektien joukosta) - + Computing hydrostatics Lasketaan hydrostatiikkaa - + Computing external faces Lasketaan ulkoisia tahkoja @@ -216,69 +203,69 @@ Yhtään käypää aluksen lohkoa ei löydetty - + Ship objects can only be created on top of hull geometry (no objects selected) - Ship objects can only be created on top of hull geometry (no objects selected) + Laivan kohteita voidaan luoda vain runkogeometrian päälle (kohteita ei valittuna) - + A ship instance must be selected before using this tool (no objects selected) - A ship instance must be selected before using this tool (no objects selected) + Aluksen ilmentymä on valittava enne4n kuin käytetään tätä työkalua (kohteita ei valittuna) + + + + More than one ship have been selected (the extra ships will be ignored) + Enemmän kuin yksi alus valittuna (ylimääräiset alukset jätetään huomiotta) + + + + A ship instance must be selected before using this tool (no valid ship found at the selected objects) + Aluksen esiintymä on valittava ennen tämän työkalun käyttöä (ei kelvollista alusta löydettävissä valituissa kohteissa) + + + + Plot module is disabled, so I cannot perform the plot + Tulostusyksikkö on aktivoimatta, en voi suorittaa pistepiirrosta + + + + A ship instance must be selected before use this tool (no objects selected) + Aluksen ilmentymä on valittava ennen kuin käytetään tätä työkalua (kohteita ei valittuna) + + + + More than one ship has been selected (just the first one will be used) + Enemmän kuin yksi alus on valittuna (vain ensimmäistä käytetään) - More than one ship have been selected (the extra ships will be ignored) - More than one ship have been selected (the extra ships will be ignored) - - - - A ship instance must be selected before using this tool (no valid ship found at the selected objects) - A ship instance must be selected before using this tool (no valid ship found at the selected objects) - - - - Plot module is disabled, so I cannot perform the plot - Plot module is disabled, so I cannot perform the plot - - - - Failure creating the folder - Failure creating the folder - - - - Failure writing to file - Failure writing to file - - - - A ship instance must be selected before use this tool (no objects selected) - A ship instance must be selected before use this tool (no objects selected) - - - - More than one ship has been selected (just the first one will be used) - More than one ship has been selected (just the first one will be used) - - - A ship instance must be selected before use this tool (novalid ships found in the selected objects) - A ship instance must be selected before use this tool (novalid ships found in the selected objects) + Aluksen esiintymä on valittava ennen tämän työkalun käyttöä (ei kelvollista alusta löydettävissä valituista kohteista) Plot module is disabled, tools cannot graph output curves - Plot module is disabled, tools cannot graph output curves + Tulostusyksikkö kytketty pois käytöstä, työkalu ei voi piirtää käyriä - + Failure detecting external faces from the ship object - Failure detecting external faces from the ship object + Virhe havaittu aluskohteen ulkoisissa näkymäpinnoissa - - Failure writing the file - Failure writing the file + + A tank instance must be selected before using this tool (no objects selected) + Säiliökohde on valittava ennen kuin käytetään tätä työkalua (kohteita ei valittuna) + + + + More than one tank have been selected (the extra tanks will be ignored) + Enemmän kuin yksi säiliö on valittu (ylimääräisiä säiliöitä ei huomioida) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + Säiliön esiintymä on valittava ennen tämän työkalun käyttöä (ei kelvollista säiliötä löydettävissä valituista kohteista) @@ -309,70 +296,70 @@ Päärunko - + Create a new ship Luo uusi laiva - + Length Pituus - + Breadth Leveys - + Draft - Vesirajasta pohjaan + Vedos (vesirajasta pohjaan) ship_hydrostatic - + Plot hydrostatics Tulosta hydrostatiikkakäyrät - + Trim rajaa - + Minimum draft Pienin syväys - + Maximum draft Suurin syväys - + Number of points Pisteiden määrä - + Hydrostatics tool trim selected Hydrostaattisen työkalu hienosäätö valittu - + Hydrostatics tool minimum draft selected [m] Hydrostaattisen työkalun pienin syväys valittu - + Hydrostatics tool maximum draft selected [m] Hydrostaattisen työkalun suurin syväys valittu - + Hydrostatics tool number of points selected Hydrostaattisen työkalun pisteiden määrä valittu @@ -393,72 +380,180 @@ ship_outline - + Outline draw Ääriviivojen piirto - + Auto create Luo automaattisesti - + Delete all sections Tuhoa kaikki lohkot - + Create sections Luo lohkoja - + Transversal Poikittainen - + Longitudinal Pitkittäinen - + Water lines Vesiraja - + Transversal section positions [m] - Transversal section positions [m] + Poikittaisen lohkon sijainnit [m] - + Longitudinal section positions [m] - Longitudinal section positions [m] + Pitkittäisen lohkon sijainnit [m] - + Water line positions [m] - Water line positions [m] + Vesirajan sijainnit [m] - shipsim_create + ship_tank + + + True if it is a valid tank instance, False otherwise + Tosi, jos se on voimassa oleva säiliön ilmentymä, muuten epätosi + + + + Volume of fluid [m^3] + Nesteen määrä [m ^ 3] + + + + Density [kg / m^3] + Tiheys [kg / m ^ 3] + + + + Create a new tank + Luo uusi säiliö + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Säiliön kohteita voidaan luoda vain sen geometrian päälle (objekteja ei valittuna) + + + + No solids found in the selected objects + Ei löydy yhtenäisiä rakenteita valituista objekteista + + + + There are not ship objects to create weights into them + Ei ole aluksen kohteita, joille voidaan luoda painoja + + + + Ship + Alus + - shipsim_stop - - - shipsim_track - - - shiptank_create - - - shiptank_gz - - - shiptank_weights + ship_weight + + + Create a new ship weight + Luoda uusi aluksen paino + + + + True if it is a valid weight instance, False otherwise + Tosi, jos se on kelvollinen painon ilmentymä, muuten epätosi + + + + Mass [kg] + Massa [kg] + + + + Linear density [kg / m] + Lineaarinen tiheys [kg / m] + + + + Area density [kg / m^3] + Alueen tiheys [kg / m ^ 3] + + + + Density [kg / m^3] + Tiheys [kg / m ^ 3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Painokohteita voidaan luoda vain sen geometrian päälle (objekteja ei valittuna) + + + + No geometrical shapes found in the selected objects + Ei löytynyt geometrisia muotoja valituista kohteista + + + + Unknow object shapes selected + Tuntemattomia kohteen muotoja valittu + + + + There are not ship objects to create weights into them + Ei ole aluksen kohteita, joille voidaan luoda painoja + + + + Create a new weight + Luo uusi paino + + + + Ship + Alus + + + + Mass + Massa + + + + Linear density + Lineaarinen tiheys + + + + Area density + Alueen tiheys + + + + Density + Tiheys + diff --git a/src/Mod/Ship/resources/translations/Ship_fr.qm b/src/Mod/Ship/resources/translations/Ship_fr.qm index 5f41e99517..a456db93c4 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_fr.qm and b/src/Mod/Ship/resources/translations/Ship_fr.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_fr.ts b/src/Mod/Ship/resources/translations/Ship_fr.ts index e45be97e02..84fe0afa1e 100644 --- a/src/Mod/Ship/resources/translations/Ship_fr.ts +++ b/src/Mod/Ship/resources/translations/Ship_fr.ts @@ -4,30 +4,15 @@ Ship - + Ship design Conception de navires - + Weights Poids - - - Ship Weights names - Noms des poids de navire - - - - Lightweight - Léger - - - - Ship Weights centers of gravity - Centres de gravité des poids de navire - True if it is a valid ship instance, False otherwise @@ -54,9 +39,14 @@ Ensemble des faces externes de la coque du bateau - - Ship Weights masses [tons] - Masse du navire [tonnes] + + Set of weight instances + Groupe de poids + + + + Set of tank instances + Groupe de compartiments @@ -85,15 +75,6 @@ Créer une nouvelle instance de navire sur le dessus de la géométrie de la coque - - Ship_CreateSim - - - Ship_CreateTank - - - Ship_GZ - Ship_Hydrostatics @@ -133,75 +114,81 @@ tracer le profil de coque du navire - - Ship_RunSim - - - Ship_StopSim - - - Ship_TrackSim - - - Ship_Weights - ship_areas - + Draft Tirant d'eau - + Trim Ajuster - + Displacement Déplacement - + Areas curve tool draft selected [m] Outil projet de courbe de zone sélectionné [m] - + Plot the transversal areas curve tracer la courbe de surface transversal - + Areas curve tool trim selected [deg] outil de découpe de courbes sélectionné [deg] - ship_console + ship_capacity - - Data saved - Données enregistrées + + Tank capacity curve + Courbe de capacité de compartiment - + + Plot the tank capacity curve (level-volume curve) + Traçer la courbe de capacité d'un compartiment (courbe niveau-volume) + + + + Plot the tank capacity curve + Traçer la courbe de capacité d'un compartiment + + + + Number of points + Nombre de points + + + + ship_console + + Please create or load a ship hull geometry before using this tool Veuillez créer ou charger une géométrie de coque de navire avant d'utiliser cet outil - + Ship objects can only be created on top of hull geometry (no solid found at selected objects) Les navires ne peuvent être créés qu'au sommet de la géométrie de la coque (aucun solide n'a été trouvé parmi les objets sélectionnés) - + Computing hydrostatics Calculs hydrostatiques - + Computing external faces Calcul des faces externes @@ -216,52 +203,42 @@ Aucune section valide de navire n'a été trouvée - + Ship objects can only be created on top of hull geometry (no objects selected) Les navires ne peuvent être créés qu'au sommet de la géométrie de la coque (pas d'objet sélectionné) - + A ship instance must be selected before using this tool (no objects selected) Une instance de navire doit être sélectionnée avant d'utiliser cet outil (aucun objet sélectionné) - + More than one ship have been selected (the extra ships will be ignored) Plus d'un navire ont été sélectionnés (les navires supplémentaires seront ignorées) - + A ship instance must be selected before using this tool (no valid ship found at the selected objects) Une instance de navire doit être sélectionnée avant d'utiliser cet outil (aucun navire valide dans les objets sélectionnés) - + Plot module is disabled, so I cannot perform the plot Module de traçage est désactivé, donc je ne peux realiser le traçage - - Failure creating the folder - Échec de création du dossier - - - - Failure writing to file - Échec d'écriture dans le fichier - - - + A ship instance must be selected before use this tool (no objects selected) Une instance de navire doit être sélectionnée avant d'utiliser cet outil (aucun objet sélectionné) - + More than one ship has been selected (just the first one will be used) Plus d'un navire a été sélectionné ( seul le premier sera utilisé) - + A ship instance must be selected before use this tool (novalid ships found in the selected objects) Une instance de navire doit être sélectionnée avant d'utiliser cet outil (aucun navire valide dans les objets sélectionnés) @@ -271,14 +248,24 @@ Le module de tracé est désactivé, traçage impossible - + Failure detecting external faces from the ship object Échec de détection des faces externes de l'objet navire - - Failure writing the file - Échec d'écriture du fichier + + A tank instance must be selected before using this tool (no objects selected) + Un compartiment doit être sélectionné avant d'utiliser cet outil (aucun objet sélectionné) + + + + More than one tank have been selected (the extra tanks will be ignored) + Plusieurs compartiments ont été sélectionnés (les compartiments supplémentaires seront ignorés) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + Un compartiment doit être sélectionné avant d'utiliser cet outil (aucun compartiment valide parmi les objets sélectionnés) @@ -309,22 +296,22 @@ Cadre principal - + Create a new ship Créer un nouveau navire - + Length Longueur - + Breadth Etendu/Largeur - + Draft Tirant d'eau @@ -332,47 +319,47 @@ ship_hydrostatic - + Plot hydrostatics Tracer les lignes hydrostatiques - + Trim Ajuster - + Minimum draft Tirant d'eau minimum - + Maximum draft Tirant d'eau maximum - + Number of points Nombre de points - + Hydrostatics tool trim selected L'outil d'ajustement des lignes hydrostatiques est sélectionné - + Hydrostatics tool minimum draft selected [m] Tirant d'eau minimum sélectionné par l'outil hydrostatic [m] - + Hydrostatics tool maximum draft selected [m] Tirant d'eau maximum sélectionné par l'outil hydrostatic [m] - + Hydrostatics tool number of points selected L'outil nombre de point pour les lignes hydrostatiques est sélectionné @@ -393,72 +380,180 @@ ship_outline - + Outline draw Dessiner le contour - + Auto create Créer automatiquement - + Delete all sections Supprimer toutes les sections - + Create sections Créer des sections - + Transversal Transversal - + Longitudinal Longitudinal - + Water lines Lignes de flottaison - + Transversal section positions [m] Position des sections transversales [m] - + Longitudinal section positions [m] Position des sections longitudinales [m] - + Water line positions [m] Position des lignes de flottaison [m] - shipsim_create + ship_tank + + + True if it is a valid tank instance, False otherwise + Vrai si ceci est un compartiment valide, sinon False + + + + Volume of fluid [m^3] + Volume de fluide [m^3] + + + + Density [kg / m^3] + Densité [kg / m^3] + + + + Create a new tank + Créer un nouveau compartiment + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Un compartiment peut seulement être créé à partir de sa géométrie (aucun objet sélectionné) + + + + No solids found in the selected objects + Aucun solide présent parmi les objets sélectionnés + + + + There are not ship objects to create weights into them + Il n'y a pas de navire pour y créer des poids + + + + Ship + Navire + - shipsim_stop - - - shipsim_track - - - shiptank_create - - - shiptank_gz - - - shiptank_weights + ship_weight + + + Create a new ship weight + Créer un nouveau poids de navire + + + + True if it is a valid weight instance, False otherwise + True si ceci est un navire valide, sinon False + + + + Mass [kg] + Masse [kg] + + + + Linear density [kg / m] + Masse linéique [kg / m] + + + + Area density [kg / m^3] + Densité surfacique [kg / m^3] + + + + Density [kg / m^3] + Densité [kg / m^3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Un poids peut seulement être créé à partir de sa géométrie (aucun objet sélectionné) + + + + No geometrical shapes found in the selected objects + Aucune forme géométrique parmi les objets sélectionnés + + + + Unknow object shapes selected + Formes inconnues sélectionnées + + + + There are not ship objects to create weights into them + Il n'y a pas de navire pour y créer des poids + + + + Create a new weight + Créer un nouveau poids + + + + Ship + Navire + + + + Mass + Masse + + + + Linear density + Masse linéaire + + + + Area density + Densité surfacique + + + + Density + Densité + diff --git a/src/Mod/Ship/resources/translations/Ship_hr.qm b/src/Mod/Ship/resources/translations/Ship_hr.qm index a248271835..a4acc95c14 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_hr.qm and b/src/Mod/Ship/resources/translations/Ship_hr.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_hr.ts b/src/Mod/Ship/resources/translations/Ship_hr.ts index 67ed5f1b4a..6665a4fed5 100644 --- a/src/Mod/Ship/resources/translations/Ship_hr.ts +++ b/src/Mod/Ship/resources/translations/Ship_hr.ts @@ -4,30 +4,15 @@ Ship - + Ship design Dizajn broda - + Weights Težine - - - Ship Weights names - Ship Weights names - - - - Lightweight - Lightweight - - - - Ship Weights centers of gravity - Ship Weights centers of gravity - True if it is a valid ship instance, False otherwise @@ -54,9 +39,14 @@ Set of external faces of the ship hull - - Ship Weights masses [tons] - Ship Weights masses [tons] + + Set of weight instances + Set of weight instances + + + + Set of tank instances + Set of tank instances @@ -85,15 +75,6 @@ Create a new ship instance on top of the hull geometry - - Ship_CreateSim - - - Ship_CreateTank - - - Ship_GZ - Ship_Hydrostatics @@ -133,75 +114,81 @@ Plots the ship hull outline draw - - Ship_RunSim - - - Ship_StopSim - - - Ship_TrackSim - - - Ship_Weights - ship_areas - + Draft Skica - + Trim Skrati - + Displacement Premještanje - + Areas curve tool draft selected [m] Areas curve tool draft selected [m] - + Plot the transversal areas curve Plot the transversal areas curve - + Areas curve tool trim selected [deg] Areas curve tool trim selected [deg] - ship_console + ship_capacity - - Data saved - Podaci spremljeni + + Tank capacity curve + Tank capacity curve - + + Plot the tank capacity curve (level-volume curve) + Plot the tank capacity curve (level-volume curve) + + + + Plot the tank capacity curve + Plot the tank capacity curve + + + + Number of points + Broj točaka + + + + ship_console + + Please create or load a ship hull geometry before using this tool Please create or load a ship hull geometry before using this tool - + Ship objects can only be created on top of hull geometry (no solid found at selected objects) Ship objects can only be created on top of hull geometry (no solid found at selected objects) - + Computing hydrostatics Computing hydrostatics - + Computing external faces Computing external faces @@ -216,52 +203,42 @@ Any valid ship section found - + Ship objects can only be created on top of hull geometry (no objects selected) Ship objects can only be created on top of hull geometry (no objects selected) - + A ship instance must be selected before using this tool (no objects selected) A ship instance must be selected before using this tool (no objects selected) - + More than one ship have been selected (the extra ships will be ignored) More than one ship have been selected (the extra ships will be ignored) - + A ship instance must be selected before using this tool (no valid ship found at the selected objects) A ship instance must be selected before using this tool (no valid ship found at the selected objects) - + Plot module is disabled, so I cannot perform the plot Plot module is disabled, so I cannot perform the plot - - Failure creating the folder - Failure creating the folder - - - - Failure writing to file - Failure writing to file - - - + A ship instance must be selected before use this tool (no objects selected) A ship instance must be selected before use this tool (no objects selected) - + More than one ship has been selected (just the first one will be used) More than one ship has been selected (just the first one will be used) - + A ship instance must be selected before use this tool (novalid ships found in the selected objects) A ship instance must be selected before use this tool (novalid ships found in the selected objects) @@ -271,14 +248,24 @@ Plot module is disabled, tools cannot graph output curves - + Failure detecting external faces from the ship object Failure detecting external faces from the ship object - - Failure writing the file - Failure writing the file + + A tank instance must be selected before using this tool (no objects selected) + A tank instance must be selected before using this tool (no objects selected) + + + + More than one tank have been selected (the extra tanks will be ignored) + More than one tank have been selected (the extra tanks will be ignored) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + A tank instance must be selected before using this tool (no valid tank found at the selected objects) @@ -309,22 +296,22 @@ Glavni okvir - + Create a new ship Izradi novi brod - + Length Dužina - + Breadth Širina - + Draft Skica @@ -332,47 +319,47 @@ ship_hydrostatic - + Plot hydrostatics Izradi hidrostatiku - + Trim Skrati - + Minimum draft Minimum draft - + Maximum draft Maximum draft - + Number of points Broj točaka - + Hydrostatics tool trim selected Hydrostatics tool trim selected - + Hydrostatics tool minimum draft selected [m] Hydrostatics tool minimum draft selected [m] - + Hydrostatics tool maximum draft selected [m] Hydrostatics tool maximum draft selected [m] - + Hydrostatics tool number of points selected Hydrostatics tool number of points selected @@ -393,72 +380,180 @@ ship_outline - + Outline draw Outline draw - + Auto create Automatski stvoriti - + Delete all sections Izbriši sve dijelove - + Create sections Kreiraj dijelove - + Transversal Poprečno - + Longitudinal Uzdužno - + Water lines Vodena linija - + Transversal section positions [m] Transversal section positions [m] - + Longitudinal section positions [m] Longitudinal section positions [m] - + Water line positions [m] Water line positions [m] - shipsim_create + ship_tank + + + True if it is a valid tank instance, False otherwise + True if it is a valid tank instance, False otherwise + + + + Volume of fluid [m^3] + Volume of fluid [m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Create a new tank + Create a new tank + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Tanks objects can only be created on top of its geometry (no objects selected) + + + + No solids found in the selected objects + No solids found in the selected objects + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Ship + Ship + - shipsim_stop - - - shipsim_track - - - shiptank_create - - - shiptank_gz - - - shiptank_weights + ship_weight + + + Create a new ship weight + Create a new ship weight + + + + True if it is a valid weight instance, False otherwise + True if it is a valid weight instance, False otherwise + + + + Mass [kg] + Mass [kg] + + + + Linear density [kg / m] + Linear density [kg / m] + + + + Area density [kg / m^3] + Area density [kg / m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Weight objects can only be created on top of its geometry (no objects selected) + + + + No geometrical shapes found in the selected objects + No geometrical shapes found in the selected objects + + + + Unknow object shapes selected + Unknow object shapes selected + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Create a new weight + Create a new weight + + + + Ship + Ship + + + + Mass + Mass + + + + Linear density + Linear density + + + + Area density + Area density + + + + Density + Density + diff --git a/src/Mod/Ship/resources/translations/Ship_hu.qm b/src/Mod/Ship/resources/translations/Ship_hu.qm index 5e1a83eb8f..2b0737d15d 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_hu.qm and b/src/Mod/Ship/resources/translations/Ship_hu.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_hu.ts b/src/Mod/Ship/resources/translations/Ship_hu.ts index 2fad54fe3a..e852bcf26c 100644 --- a/src/Mod/Ship/resources/translations/Ship_hu.ts +++ b/src/Mod/Ship/resources/translations/Ship_hu.ts @@ -4,30 +4,15 @@ Ship - + Ship design Hajó tervezés - + Weights Súlyok - - - Ship Weights names - Hajó súlyainak nevei - - - - Lightweight - Könnyűsúlyú - - - - Ship Weights centers of gravity - Hajó súlyok a gravitációs középponthoz - True if it is a valid ship instance, False otherwise @@ -54,9 +39,14 @@ Set of external faces of the ship hull - - Ship Weights masses [tons] - Ship Weights masses [tons] + + Set of weight instances + Set of weight instances + + + + Set of tank instances + Set of tank instances @@ -85,15 +75,6 @@ Create a new ship instance on top of the hull geometry - - Ship_CreateSim - - - Ship_CreateTank - - - Ship_GZ - Ship_Hydrostatics @@ -133,75 +114,81 @@ Plots the ship hull outline draw - - Ship_RunSim - - - Ship_StopSim - - - Ship_TrackSim - - - Ship_Weights - ship_areas - + Draft Tervezés - + Trim Vágás - + Displacement Elmozdulás - + Areas curve tool draft selected [m] Területek görbéi tervező eszköz kiválasztva [m] - + Plot the transversal areas curve Plot the transversal areas curve - + Areas curve tool trim selected [deg] Areas curve tool trim selected [deg] - ship_console + ship_capacity - - Data saved - Adat mentve + + Tank capacity curve + Tank capacity curve - + + Plot the tank capacity curve (level-volume curve) + Plot the tank capacity curve (level-volume curve) + + + + Plot the tank capacity curve + Plot the tank capacity curve + + + + Number of points + Pontok száma + + + + ship_console + + Please create or load a ship hull geometry before using this tool Kérjük, hozzon létre, vagy töltsön be egy hajó törzs geometriát mielőtt használná ezt az eszközt - + Ship objects can only be created on top of hull geometry (no solid found at selected objects) Hajó objektumok csak hajótörzs geometriára létrehozhatók (nem található szilárd test a kijelölt objektumokon) - + Computing hydrostatics Vízszilárdság / hydrostatika kiszámítása - + Computing external faces Külső felületek számítása @@ -216,52 +203,42 @@ Bármely megtalálható érvényes hajó rész - + Ship objects can only be created on top of hull geometry (no objects selected) Ship objects can only be created on top of hull geometry (no objects selected) - + A ship instance must be selected before using this tool (no objects selected) A ship instance must be selected before using this tool (no objects selected) - + More than one ship have been selected (the extra ships will be ignored) More than one ship have been selected (the extra ships will be ignored) - + A ship instance must be selected before using this tool (no valid ship found at the selected objects) A ship instance must be selected before using this tool (no valid ship found at the selected objects) - + Plot module is disabled, so I cannot perform the plot Plot module is disabled, so I cannot perform the plot - - Failure creating the folder - Failure creating the folder - - - - Failure writing to file - Failure writing to file - - - + A ship instance must be selected before use this tool (no objects selected) A ship instance must be selected before use this tool (no objects selected) - + More than one ship has been selected (just the first one will be used) More than one ship has been selected (just the first one will be used) - + A ship instance must be selected before use this tool (novalid ships found in the selected objects) A ship instance must be selected before use this tool (novalid ships found in the selected objects) @@ -271,14 +248,24 @@ Plot module is disabled, tools cannot graph output curves - + Failure detecting external faces from the ship object Failure detecting external faces from the ship object - - Failure writing the file - Failure writing the file + + A tank instance must be selected before using this tool (no objects selected) + A tank instance must be selected before using this tool (no objects selected) + + + + More than one tank have been selected (the extra tanks will be ignored) + More than one tank have been selected (the extra tanks will be ignored) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + A tank instance must be selected before using this tool (no valid tank found at the selected objects) @@ -309,22 +296,22 @@ Fő keret - + Create a new ship Új hajó létrehozása - + Length Hossz - + Breadth Szélesség - + Draft Tervezés @@ -332,47 +319,47 @@ ship_hydrostatic - + Plot hydrostatics Vízszilárdság / hidrostatika nyomtatása - + Trim Vágás - + Minimum draft Minimális merülés - + Maximum draft Maximális merülés - + Number of points Pontok száma - + Hydrostatics tool trim selected Vízszilárdság vágó eszköz kiválasztva - + Hydrostatics tool minimum draft selected [m] Vízszilárdság minimum merülés kiválasztva [m] - + Hydrostatics tool maximum draft selected [m] Vízszilárdság maximum merülés kiválasztva [m] - + Hydrostatics tool number of points selected Vízszilárdság pontok számai eszköz kiválasztva @@ -393,72 +380,180 @@ ship_outline - + Outline draw Külső vonal rajzolása - + Auto create Automatikus létrehozás - + Delete all sections Minden szakasz törlése - + Create sections Szakaszok létrehozása - + Transversal Átlós - + Longitudinal Hosszanti - + Water lines Vízvonalak - + Transversal section positions [m] Transversal section positions [m] - + Longitudinal section positions [m] Longitudinal section positions [m] - + Water line positions [m] Water line positions [m] - shipsim_create + ship_tank + + + True if it is a valid tank instance, False otherwise + True if it is a valid tank instance, False otherwise + + + + Volume of fluid [m^3] + Volume of fluid [m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Create a new tank + Create a new tank + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Tanks objects can only be created on top of its geometry (no objects selected) + + + + No solids found in the selected objects + No solids found in the selected objects + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Ship + Ship + - shipsim_stop - - - shipsim_track - - - shiptank_create - - - shiptank_gz - - - shiptank_weights + ship_weight + + + Create a new ship weight + Create a new ship weight + + + + True if it is a valid weight instance, False otherwise + True if it is a valid weight instance, False otherwise + + + + Mass [kg] + Mass [kg] + + + + Linear density [kg / m] + Linear density [kg / m] + + + + Area density [kg / m^3] + Area density [kg / m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Weight objects can only be created on top of its geometry (no objects selected) + + + + No geometrical shapes found in the selected objects + No geometrical shapes found in the selected objects + + + + Unknow object shapes selected + Unknow object shapes selected + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Create a new weight + Create a new weight + + + + Ship + Ship + + + + Mass + Mass + + + + Linear density + Linear density + + + + Area density + Area density + + + + Density + Density + diff --git a/src/Mod/Ship/resources/translations/Ship_it.qm b/src/Mod/Ship/resources/translations/Ship_it.qm index a313a76f17..9a9818eecf 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_it.qm and b/src/Mod/Ship/resources/translations/Ship_it.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_it.ts b/src/Mod/Ship/resources/translations/Ship_it.ts index d48152a736..d7cadcd73e 100644 --- a/src/Mod/Ship/resources/translations/Ship_it.ts +++ b/src/Mod/Ship/resources/translations/Ship_it.ts @@ -4,30 +4,15 @@ Ship - + Ship design Progettazione navale - + Weights Pesi - - - Ship Weights names - Nomi dei pesi della nave - - - - Lightweight - Leggero - - - - Ship Weights centers of gravity - Baricentro della nave - True if it is a valid ship instance, False otherwise @@ -54,9 +39,14 @@ Insieme di facce esterne dello scafo della nave - - Ship Weights masses [tons] - Massa nave [tonnellate] + + Set of weight instances + Imposta una istanza di pesi + + + + Set of tank instances + Imposta le istanze di serbatoio @@ -85,15 +75,6 @@ Crea una nuova istanza di nave sulla geometria dello scafo - - Ship_CreateSim - - - Ship_CreateTank - - - Ship_GZ - Ship_Hydrostatics @@ -104,7 +85,7 @@ Plot the ship hydrostatics - Traccia su un grafico l'idrostatica della nava + Traccia su un grafico l'idrostatica della nave @@ -117,7 +98,7 @@ Load an example ship hull geometry. - Carica un esempio di geometria dello di una nave. + Carica un esempio di geometria di una nave. @@ -133,75 +114,81 @@ Traccia su un grafico le linee di contorno dello scafo della nave - - Ship_RunSim - - - Ship_StopSim - - - Ship_TrackSim - - - Ship_Weights - ship_areas - + Draft Pescaggio - + Trim Taglia - + Displacement Spostamento - + Areas curve tool draft selected [m] Strumento bozza dell'area curva selezionato [m] - + Plot the transversal areas curve Traccia su un grafico la curva delle aree trasversali - + Areas curve tool trim selected [deg] - Areas curve tool trim selected [deg] + Strumento per definire la curva dell'area selezionata [gradi] + + + + ship_capacity + + + Tank capacity curve + Curva di capacità del serbatoio + + + + Plot the tank capacity curve (level-volume curve) + Traccia la curva di capacità del serbatoio (curva di livello-volume) + + + + Plot the tank capacity curve + Traccia la curva di capacità del serbatoio + + + + Number of points + Numero di punti ship_console - - Data saved - Dati salvati - - - + Please create or load a ship hull geometry before using this tool Si prega di creare o caricare una geometria dello scafo prima di utilizzare questo strumento - + Ship objects can only be created on top of hull geometry (no solid found at selected objects) Gli oggetti nave possono essere creati su una geometria dello scafo (nessuno degli oggetti selezionati è un solido) - + Computing hydrostatics Calcolo idrostatica - + Computing external faces Calcolo facce esterne @@ -216,52 +203,42 @@ Nessuna sezione valida di nave trovata - + Ship objects can only be created on top of hull geometry (no objects selected) Gli oggetti nave possono essere creati soltanto su una geometria dello scafo (nessun oggetto selezionato) - + A ship instance must be selected before using this tool (no objects selected) Un'istanza della nave deve essere selezionata prima di usare questo strumento (nessun oggetto selezionato) - + More than one ship have been selected (the extra ships will be ignored) E' stata selezionata più di una nave (le navi extra saranno ignorate) - + A ship instance must be selected before using this tool (no valid ship found at the selected objects) Un'istanza della nave deve essere selezionata prima di usare questo strumento (non è stata trovata nessuna nave valida tra oggetti selezionati) - + Plot module is disabled, so I cannot perform the plot Il modulo Plot è disattivato, quindi non posso eseguire la tracciatura su un grafico - - Failure creating the folder - Errore durante la creazione della cartella - - - - Failure writing to file - Errore durante la scrittura del file - - - + A ship instance must be selected before use this tool (no objects selected) Un'istanza della nave deve essere selezionata prima di usare questo strumento (nessun oggetto selezionato) - + More than one ship has been selected (just the first one will be used) È stata selezionata più di una nave (sarà usata solo la prima) - + A ship instance must be selected before use this tool (novalid ships found in the selected objects) Un'istanza della nave deve essere selezionata prima di usare questo strumento (non è stata trovata nessuna nave valida tra oggetti selezionati) @@ -271,14 +248,24 @@ Il modulo plot è disabilitato, gli strumenti non possono tracciare le curve di output - + Failure detecting external faces from the ship object Errore durante la rilevazione delle facce esterne dall'oggetto nave - - Failure writing the file - Errore durante la scrittura del file + + A tank instance must be selected before using this tool (no objects selected) + Prima di utilizzare questo strumento si deve selezionare un'istanza serbatoio (nessun oggetto selezionato) + + + + More than one tank have been selected (the extra tanks will be ignored) + Sono stati selezionati più serbatoi (i serbatoi in eccesso verranno ignorati) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + Prima di utilizzare questo strumento si deve selezionare un'istanza serbatoio (tra gli oggetti selezionati non è stato trovato nessun serbatoio valido) @@ -309,22 +296,22 @@ Telaio principale - + Create a new ship Crea una nuova nave - + Length Lunghezza - + Breadth Ampiezza - + Draft Pescaggio @@ -332,47 +319,47 @@ ship_hydrostatic - + Plot hydrostatics Disegna idrostatica - + Trim Taglia - + Minimum draft Pescaggio minimo - + Maximum draft Pescaggio massimo - + Number of points Numero di punti - + Hydrostatics tool trim selected Strumento regolazione idrostatica selezionato - + Hydrostatics tool minimum draft selected [m] Strumento idrostatico del pescaggio minimo selezionato [m] - + Hydrostatics tool maximum draft selected [m] Strumento idrostatico del pescaggio massimo selezionato [m] - + Hydrostatics tool number of points selected strumento idrostatico numero di punti selezionato @@ -393,72 +380,180 @@ ship_outline - + Outline draw Disegno del contorno - + Auto create Creazione automatica - + Delete all sections Elimina tutte le sezioni - + Create sections Creare sezioni - + Transversal Trasversale - + Longitudinal Longitudinale - + Water lines Linee d'acqua - + Transversal section positions [m] Posizioni della sezione trasversale [m] - + Longitudinal section positions [m] Posizioni della sezione longitudinale [m] - + Water line positions [m] Posizioni della linea d'acqua [m] - shipsim_create + ship_tank + + + True if it is a valid tank instance, False otherwise + True se è un'istanza di serbatoio valido, altrimenti False + + + + Volume of fluid [m^3] + Volume del fluido [m ^ 3] + + + + Density [kg / m^3] + Densità [kg / m ^ 3] + + + + Create a new tank + Crea un nuovo serbatoio + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Gli oggetti serbatoio possono essere creati solo sopra la loro geometria (nessun oggetto selezionato) + + + + No solids found in the selected objects + Tra gli oggetti selezionati non è stato trovato nessun solido + + + + There are not ship objects to create weights into them + Non ci sono oggetti nave in cui creare i pesi + + + + Ship + Nave + - shipsim_stop - - - shipsim_track - - - shiptank_create - - - shiptank_gz - - - shiptank_weights + ship_weight + + + Create a new ship weight + Crea un nuovo peso della nave + + + + True if it is a valid weight instance, False otherwise + True se è un'istanza di peso valida, altrimenti False + + + + Mass [kg] + Massa [kg] + + + + Linear density [kg / m] + Densità lineare [kg / m] + + + + Area density [kg / m^3] + Densità della zona [kg / m ^ 3] + + + + Density [kg / m^3] + Densità [kg / m ^ 3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Gli oggetti Peso possono essere creati solo sopra la loro geometria (nessun oggetto selezionato) + + + + No geometrical shapes found in the selected objects + Tra gli oggetti selezionati non sono state trovate forme geometriche + + + + Unknow object shapes selected + Gli oggetti forma selezionati sono sconosciuti + + + + There are not ship objects to create weights into them + Non ci sono oggetti nave in cui creare i pesi + + + + Create a new weight + Crea un nuovo peso + + + + Ship + Nave + + + + Mass + Massa + + + + Linear density + Densità lineare + + + + Area density + Densità della zona + + + + Density + Densità + diff --git a/src/Mod/Ship/resources/translations/Ship_ja.qm b/src/Mod/Ship/resources/translations/Ship_ja.qm index a8fd773e79..964380929c 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_ja.qm and b/src/Mod/Ship/resources/translations/Ship_ja.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_ja.ts b/src/Mod/Ship/resources/translations/Ship_ja.ts index f8624288cb..b42aef720f 100644 --- a/src/Mod/Ship/resources/translations/Ship_ja.ts +++ b/src/Mod/Ship/resources/translations/Ship_ja.ts @@ -4,44 +4,29 @@ Ship - + Ship design 船舶設計 - + Weights 重さ - - - Ship Weights names - 船舶重量名 - - - - Lightweight - ライト級 - - - - Ship Weights centers of gravity - 船舶重量重心 - True if it is a valid ship instance, False otherwise - True if it is a valid ship instance, False otherwise + 有効な船のインスタンスの場合 True、それ以外の場合 False Ship length [m] - Ship length [m] + 船の長さ [m] Ship breadth [m] - Ship breadth [m] + 船の幅 [m] @@ -51,12 +36,17 @@ Set of external faces of the ship hull - Set of external faces of the ship hull + 船殻の外部面を設定 - - Ship Weights masses [tons] - Ship Weights masses [tons] + + Set of weight instances + Set of weight instances + + + + Set of tank instances + Set of tank instances @@ -69,7 +59,7 @@ Plot the transversal areas curve - Plot the transversal areas curve + 横断領域曲線をプロット @@ -82,18 +72,9 @@ Create a new ship instance on top of the hull geometry - Create a new ship instance on top of the hull geometry + 船殻ジオメトリー上に新しい船舶インスタンスを作成 - - Ship_CreateSim - - - Ship_CreateTank - - - Ship_GZ - Ship_Hydrostatics @@ -104,7 +85,7 @@ Plot the ship hydrostatics - Plot the ship hydrostatics + 船舶の流体静力学をプロット @@ -117,7 +98,7 @@ Load an example ship hull geometry. - Load an example ship hull geometry. + サンプルの船体形状を読み込む @@ -130,78 +111,84 @@ Plots the ship hull outline draw - Plots the ship hull outline draw + 船殻外形線をプロット - - Ship_RunSim - - - Ship_StopSim - - - Ship_TrackSim - - - Ship_Weights - ship_areas - + Draft 喫水 - + Trim トリム - + Displacement 変位 - + Areas curve tool draft selected [m] 面積曲線ツール 喫水選択 [m] - + Plot the transversal areas curve - Plot the transversal areas curve + 横断領域曲線をプロット - + Areas curve tool trim selected [deg] - Areas curve tool trim selected [deg] + 領域曲線ツール トリム選択 [度] + + + + ship_capacity + + + Tank capacity curve + Tank capacity curve + + + + Plot the tank capacity curve (level-volume curve) + Plot the tank capacity curve (level-volume curve) + + + + Plot the tank capacity curve + Plot the tank capacity curve + + + + Number of points + 点の数 ship_console - - Data saved - データを保存しました。 - - - + Please create or load a ship hull geometry before using this tool このツールを使用する前に船殻ジオメトリーを作成するか読み込んでください - + Ship objects can only be created on top of hull geometry (no solid found at selected objects) 船舶オブジェクトは船殻ジオメトリー上にのみ作成できます（選択されているオブジェクトの中にソリッドがありません） - + Computing hydrostatics 流体静力学を計算 - + Computing external faces 外部面を計算 @@ -216,69 +203,69 @@ 有効な船舶断面が見つかりません - + Ship objects can only be created on top of hull geometry (no objects selected) - Ship objects can only be created on top of hull geometry (no objects selected) + 船舶オブジェクトは船殻ジオメトリー上にのみ作成できます（選択されているオブジェクトがありません） - + A ship instance must be selected before using this tool (no objects selected) - A ship instance must be selected before using this tool (no objects selected) + このツールを使用する前に船舶インスタンスを選択する必要があります(選択されているオブジェクトがありません) + + + + More than one ship have been selected (the extra ships will be ignored) + 複数の船舶が選択されています(余分な船舶は無視されます) + + + + A ship instance must be selected before using this tool (no valid ship found at the selected objects) + このツールを使用する前に船舶のインスタンスを選択する必要があります(選択オブジェクトの中に適切な船舶が見つかりません) + + + + Plot module is disabled, so I cannot perform the plot + プロットモジュールが無効なのでプロットを実行できません。 + + + + A ship instance must be selected before use this tool (no objects selected) + このツールを使用する前に船舶インスタンスを選択する必要があります(選択されているオブジェクトがありません) + + + + More than one ship has been selected (just the first one will be used) + 複数の船が選択されています (最初の 1 つだけ使用されます) - More than one ship have been selected (the extra ships will be ignored) - More than one ship have been selected (the extra ships will be ignored) - - - - A ship instance must be selected before using this tool (no valid ship found at the selected objects) - A ship instance must be selected before using this tool (no valid ship found at the selected objects) - - - - Plot module is disabled, so I cannot perform the plot - Plot module is disabled, so I cannot perform the plot - - - - Failure creating the folder - フォルダーの作成に失敗しました - - - - Failure writing to file - ファイルの書き込みに失敗しました - - - - A ship instance must be selected before use this tool (no objects selected) - A ship instance must be selected before use this tool (no objects selected) - - - - More than one ship has been selected (just the first one will be used) - More than one ship has been selected (just the first one will be used) - - - A ship instance must be selected before use this tool (novalid ships found in the selected objects) - A ship instance must be selected before use this tool (novalid ships found in the selected objects) + このツールを使用する前に船舶のインスタンスを選択する必要があります(選択オブジェクトの中に適切な船舶が見つかりません) Plot module is disabled, tools cannot graph output curves - Plot module is disabled, tools cannot graph output curves + プロットモジュールが無効になっているため結果の曲線を描画できません - + Failure detecting external faces from the ship object - Failure detecting external faces from the ship object + 船舶オブジェクトからの外部面検出に失敗 - - Failure writing the file - ファイルの書き込みに失敗しました + + A tank instance must be selected before using this tool (no objects selected) + A tank instance must be selected before using this tool (no objects selected) + + + + More than one tank have been selected (the extra tanks will be ignored) + More than one tank have been selected (the extra tanks will be ignored) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + A tank instance must be selected before using this tool (no valid tank found at the selected objects) @@ -309,22 +296,22 @@ メイン フレーム - + Create a new ship 新規に船を作成 - + Length 長さ - + Breadth 全幅 - + Draft 喫水 @@ -332,47 +319,47 @@ ship_hydrostatic - + Plot hydrostatics 流体静力学をプロット - + Trim トリム - + Minimum draft 最小喫水 - + Maximum draft 最大喫水 - + Number of points 点の数 - + Hydrostatics tool trim selected 流体静力学ツール トリム選択 - + Hydrostatics tool minimum draft selected [m] 流体静力学ツール 最小喫水選択 [m] - + Hydrostatics tool maximum draft selected [m] 流体静力学ツール 最大喫水選択 [m] - + Hydrostatics tool number of points selected 流体静力学ツール 点数選択 [m] @@ -393,72 +380,180 @@ ship_outline - + Outline draw 外形線表示 - + Auto create 自動作成 - + Delete all sections 全ての断面を削除 - + Create sections 断面を作成 - + Transversal 横 - + Longitudinal 縦 - + Water lines 水線 - + Transversal section positions [m] - Transversal section positions [m] + 横断断面位置 [m] - + Longitudinal section positions [m] - Longitudinal section positions [m] + 縦断断面位置 [m] - + Water line positions [m] - Water line positions [m] + 喫水線位置 [m] - shipsim_create + ship_tank + + + True if it is a valid tank instance, False otherwise + True if it is a valid tank instance, False otherwise + + + + Volume of fluid [m^3] + Volume of fluid [m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Create a new tank + 新しいタンクを作成 + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Tanks objects can only be created on top of its geometry (no objects selected) + + + + No solids found in the selected objects + No solids found in the selected objects + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Ship + Ship + - shipsim_stop - - - shipsim_track - - - shiptank_create - - - shiptank_gz - - - shiptank_weights + ship_weight + + + Create a new ship weight + Create a new ship weight + + + + True if it is a valid weight instance, False otherwise + True if it is a valid weight instance, False otherwise + + + + Mass [kg] + Mass [kg] + + + + Linear density [kg / m] + Linear density [kg / m] + + + + Area density [kg / m^3] + Area density [kg / m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Weight objects can only be created on top of its geometry (no objects selected) + + + + No geometrical shapes found in the selected objects + No geometrical shapes found in the selected objects + + + + Unknow object shapes selected + Unknow object shapes selected + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Create a new weight + Create a new weight + + + + Ship + Ship + + + + Mass + Mass + + + + Linear density + Linear density + + + + Area density + Area density + + + + Density + Density + diff --git a/src/Mod/Ship/resources/translations/Ship_nl.qm b/src/Mod/Ship/resources/translations/Ship_nl.qm index 8f3eafc11d..1c98b7a42d 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_nl.qm and b/src/Mod/Ship/resources/translations/Ship_nl.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_nl.ts b/src/Mod/Ship/resources/translations/Ship_nl.ts index 872c4ca327..13c6aad639 100644 --- a/src/Mod/Ship/resources/translations/Ship_nl.ts +++ b/src/Mod/Ship/resources/translations/Ship_nl.ts @@ -4,30 +4,15 @@ Ship - + Ship design Scheepsontwerp - + Weights Gewichten - - - Ship Weights names - Ship Weights names - - - - Lightweight - Lichtgewicht - - - - Ship Weights centers of gravity - Ship Weights centers of gravity - True if it is a valid ship instance, False otherwise @@ -36,7 +21,7 @@ Ship length [m] - Ship length [m] + Lengte van het schip [m] @@ -54,9 +39,14 @@ Set of external faces of the ship hull - - Ship Weights masses [tons] - Ship Weights masses [tons] + + Set of weight instances + Set of weight instances + + + + Set of tank instances + Set of tank instances @@ -85,15 +75,6 @@ Create a new ship instance on top of the hull geometry - - Ship_CreateSim - - - Ship_CreateTank - - - Ship_GZ - Ship_Hydrostatics @@ -133,75 +114,81 @@ Plots the ship hull outline draw - - Ship_RunSim - - - Ship_StopSim - - - Ship_TrackSim - - - Ship_Weights - ship_areas - + Draft Diepgang - + Trim Trim - + Displacement Waterverplaatsing - + Areas curve tool draft selected [m] Areas curve tool draft selected [m] - + Plot the transversal areas curve Plot the transversal areas curve - + Areas curve tool trim selected [deg] Areas curve tool trim selected [deg] - ship_console + ship_capacity - - Data saved - Gegevens opgeslagen + + Tank capacity curve + Tank capacity curve - + + Plot the tank capacity curve (level-volume curve) + Plot the tank capacity curve (level-volume curve) + + + + Plot the tank capacity curve + Plot the tank capacity curve + + + + Number of points + Aantal punten + + + + ship_console + + Please create or load a ship hull geometry before using this tool Please create or load a ship hull geometry before using this tool - + Ship objects can only be created on top of hull geometry (no solid found at selected objects) Ship objects can only be created on top of hull geometry (no solid found at selected objects) - + Computing hydrostatics Hydrostatica berekenen - + Computing external faces Computing external faces @@ -216,52 +203,42 @@ Any valid ship section found - + Ship objects can only be created on top of hull geometry (no objects selected) Ship objects can only be created on top of hull geometry (no objects selected) - + A ship instance must be selected before using this tool (no objects selected) A ship instance must be selected before using this tool (no objects selected) - + More than one ship have been selected (the extra ships will be ignored) - More than one ship have been selected (the extra ships will be ignored) + Er is meer dan één schip geselecteerd (de overige schepen worden genegeerd) - + A ship instance must be selected before using this tool (no valid ship found at the selected objects) A ship instance must be selected before using this tool (no valid ship found at the selected objects) - + Plot module is disabled, so I cannot perform the plot Plot module is disabled, so I cannot perform the plot - - Failure creating the folder - Failure creating the folder - - - - Failure writing to file - Failure writing to file - - - + A ship instance must be selected before use this tool (no objects selected) A ship instance must be selected before use this tool (no objects selected) - + More than one ship has been selected (just the first one will be used) - More than one ship has been selected (just the first one will be used) + Er is meer dan één schip geselecteerd (alleen het eerste wordt gebruikt) - + A ship instance must be selected before use this tool (novalid ships found in the selected objects) A ship instance must be selected before use this tool (novalid ships found in the selected objects) @@ -271,14 +248,24 @@ Plot module is disabled, tools cannot graph output curves - + Failure detecting external faces from the ship object Failure detecting external faces from the ship object - - Failure writing the file - Failure writing the file + + A tank instance must be selected before using this tool (no objects selected) + A tank instance must be selected before using this tool (no objects selected) + + + + More than one tank have been selected (the extra tanks will be ignored) + More than one tank have been selected (the extra tanks will be ignored) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + A tank instance must be selected before using this tool (no valid tank found at the selected objects) @@ -309,22 +296,22 @@ Main frame - + Create a new ship Maak een nieuw schip - + Length Lengte - + Breadth Breedte - + Draft Diepgang @@ -332,47 +319,47 @@ ship_hydrostatic - + Plot hydrostatics Plot hydrostatics - + Trim Trim - + Minimum draft Minimumdiepgang - + Maximum draft Maximumdiepgang - + Number of points Aantal punten - + Hydrostatics tool trim selected Hydrostatics tool trim selected - + Hydrostatics tool minimum draft selected [m] Hydrostatics tool minimum draft selected [m] - + Hydrostatics tool maximum draft selected [m] Hydrostatics tool maximum draft selected [m] - + Hydrostatics tool number of points selected Hydrostatics tool number of points selected @@ -393,72 +380,180 @@ ship_outline - + Outline draw Omtrek tekenen - + Auto create Auto create - + Delete all sections Delete all sections - + Create sections Create sections - + Transversal Dwars - + Longitudinal Langs - + Water lines Waterlijnen - + Transversal section positions [m] Transversal section positions [m] - + Longitudinal section positions [m] Longitudinal section positions [m] - + Water line positions [m] Water line positions [m] - shipsim_create + ship_tank + + + True if it is a valid tank instance, False otherwise + True if it is a valid tank instance, False otherwise + + + + Volume of fluid [m^3] + Volume of fluid [m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Create a new tank + Create a new tank + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Tanks objects can only be created on top of its geometry (no objects selected) + + + + No solids found in the selected objects + No solids found in the selected objects + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Ship + Ship + - shipsim_stop - - - shipsim_track - - - shiptank_create - - - shiptank_gz - - - shiptank_weights + ship_weight + + + Create a new ship weight + Create a new ship weight + + + + True if it is a valid weight instance, False otherwise + True if it is a valid weight instance, False otherwise + + + + Mass [kg] + Mass [kg] + + + + Linear density [kg / m] + Linear density [kg / m] + + + + Area density [kg / m^3] + Area density [kg / m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Weight objects can only be created on top of its geometry (no objects selected) + + + + No geometrical shapes found in the selected objects + No geometrical shapes found in the selected objects + + + + Unknow object shapes selected + Unknow object shapes selected + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Create a new weight + Create a new weight + + + + Ship + Ship + + + + Mass + Mass + + + + Linear density + Linear density + + + + Area density + Area density + + + + Density + Density + diff --git a/src/Mod/Ship/resources/translations/Ship_no.qm b/src/Mod/Ship/resources/translations/Ship_no.qm index 656de7778a..6d757cffaf 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_no.qm and b/src/Mod/Ship/resources/translations/Ship_no.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_no.ts b/src/Mod/Ship/resources/translations/Ship_no.ts index 450875b379..1848be1eff 100644 --- a/src/Mod/Ship/resources/translations/Ship_no.ts +++ b/src/Mod/Ship/resources/translations/Ship_no.ts @@ -4,30 +4,15 @@ Ship - + Ship design Skipsdesign - + Weights Vekter - - - Ship Weights names - Ship Weights names - - - - Lightweight - Lettvekt - - - - Ship Weights centers of gravity - Ship Weights centers of gravity - True if it is a valid ship instance, False otherwise @@ -54,9 +39,14 @@ Set of external faces of the ship hull - - Ship Weights masses [tons] - Ship Weights masses [tons] + + Set of weight instances + Set of weight instances + + + + Set of tank instances + Set of tank instances @@ -85,15 +75,6 @@ Create a new ship instance on top of the hull geometry - - Ship_CreateSim - - - Ship_CreateTank - - - Ship_GZ - Ship_Hydrostatics @@ -133,75 +114,81 @@ Plots the ship hull outline draw - - Ship_RunSim - - - Ship_StopSim - - - Ship_TrackSim - - - Ship_Weights - ship_areas - + Draft Draft - + Trim Trim - + Displacement Displacement - + Areas curve tool draft selected [m] Areas curve tool draft selected [m] - + Plot the transversal areas curve Plot the transversal areas curve - + Areas curve tool trim selected [deg] Areas curve tool trim selected [deg] - ship_console + ship_capacity - - Data saved - Data saved + + Tank capacity curve + Tank capacity curve - + + Plot the tank capacity curve (level-volume curve) + Plot the tank capacity curve (level-volume curve) + + + + Plot the tank capacity curve + Plot the tank capacity curve + + + + Number of points + Antall punkter + + + + ship_console + + Please create or load a ship hull geometry before using this tool Please create or load a ship hull geometry before using this tool - + Ship objects can only be created on top of hull geometry (no solid found at selected objects) Ship objects can only be created on top of hull geometry (no solid found at selected objects) - + Computing hydrostatics Computing hydrostatics - + Computing external faces Computing external faces @@ -216,52 +203,42 @@ Any valid ship section found - + Ship objects can only be created on top of hull geometry (no objects selected) Ship objects can only be created on top of hull geometry (no objects selected) - + A ship instance must be selected before using this tool (no objects selected) A ship instance must be selected before using this tool (no objects selected) - + More than one ship have been selected (the extra ships will be ignored) More than one ship have been selected (the extra ships will be ignored) - + A ship instance must be selected before using this tool (no valid ship found at the selected objects) A ship instance must be selected before using this tool (no valid ship found at the selected objects) - + Plot module is disabled, so I cannot perform the plot Plot module is disabled, so I cannot perform the plot - - Failure creating the folder - Failure creating the folder - - - - Failure writing to file - Failure writing to file - - - + A ship instance must be selected before use this tool (no objects selected) A ship instance must be selected before use this tool (no objects selected) - + More than one ship has been selected (just the first one will be used) More than one ship has been selected (just the first one will be used) - + A ship instance must be selected before use this tool (novalid ships found in the selected objects) A ship instance must be selected before use this tool (novalid ships found in the selected objects) @@ -271,14 +248,24 @@ Plot module is disabled, tools cannot graph output curves - + Failure detecting external faces from the ship object Failure detecting external faces from the ship object - - Failure writing the file - Failure writing the file + + A tank instance must be selected before using this tool (no objects selected) + A tank instance must be selected before using this tool (no objects selected) + + + + More than one tank have been selected (the extra tanks will be ignored) + More than one tank have been selected (the extra tanks will be ignored) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + A tank instance must be selected before using this tool (no valid tank found at the selected objects) @@ -301,7 +288,7 @@ After perpendicular - After perpendicular + Bakre vinkelrett @@ -309,22 +296,22 @@ Main frame - + Create a new ship Opprette et nytt skip - + Length Lengde - + Breadth Breadth - + Draft Draft @@ -332,47 +319,47 @@ ship_hydrostatic - + Plot hydrostatics Plot hydrostatics - + Trim Trim - + Minimum draft Minimum draft - + Maximum draft Maximum draft - + Number of points Antall punkter - + Hydrostatics tool trim selected Hydrostatics tool trim selected - + Hydrostatics tool minimum draft selected [m] Hydrostatics tool minimum draft selected [m] - + Hydrostatics tool maximum draft selected [m] Hydrostatics tool maximum draft selected [m] - + Hydrostatics tool number of points selected Hydrostatics tool number of points selected @@ -393,72 +380,180 @@ ship_outline - + Outline draw Outline draw - + Auto create Auto create - + Delete all sections Delete all sections - + Create sections Create sections - + Transversal Transversal - + Longitudinal Longitudinal - + Water lines Water lines - + Transversal section positions [m] Transversal section positions [m] - + Longitudinal section positions [m] Longitudinal section positions [m] - + Water line positions [m] Water line positions [m] - shipsim_create + ship_tank + + + True if it is a valid tank instance, False otherwise + True if it is a valid tank instance, False otherwise + + + + Volume of fluid [m^3] + Volume of fluid [m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Create a new tank + Create a new tank + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Tanks objects can only be created on top of its geometry (no objects selected) + + + + No solids found in the selected objects + No solids found in the selected objects + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Ship + Ship + - shipsim_stop - - - shipsim_track - - - shiptank_create - - - shiptank_gz - - - shiptank_weights + ship_weight + + + Create a new ship weight + Create a new ship weight + + + + True if it is a valid weight instance, False otherwise + True if it is a valid weight instance, False otherwise + + + + Mass [kg] + Mass [kg] + + + + Linear density [kg / m] + Linear density [kg / m] + + + + Area density [kg / m^3] + Area density [kg / m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Weight objects can only be created on top of its geometry (no objects selected) + + + + No geometrical shapes found in the selected objects + No geometrical shapes found in the selected objects + + + + Unknow object shapes selected + Unknow object shapes selected + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Create a new weight + Create a new weight + + + + Ship + Ship + + + + Mass + Mass + + + + Linear density + Linear density + + + + Area density + Area density + + + + Density + Density + diff --git a/src/Mod/Ship/resources/translations/Ship_pl.qm b/src/Mod/Ship/resources/translations/Ship_pl.qm index 15751acaf7..9a746e5c12 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_pl.qm and b/src/Mod/Ship/resources/translations/Ship_pl.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_pl.ts b/src/Mod/Ship/resources/translations/Ship_pl.ts index a80395d32a..4f41e4bebb 100644 --- a/src/Mod/Ship/resources/translations/Ship_pl.ts +++ b/src/Mod/Ship/resources/translations/Ship_pl.ts @@ -4,59 +4,49 @@ Ship - + Ship design Projektowanie statku - + Weights Ciężary - - - Ship Weights names - Ciężary statku - nazwy - - - - Lightweight - Lekki - - - - Ship Weights centers of gravity - Ciężary statków - środki ciężkości - True if it is a valid ship instance, False otherwise - True if it is a valid ship instance, False otherwise + Prawdziwe jeśli instancja statku jest obowiązująca, Nieprawdziwe w innym wypadku Ship length [m] - Ship length [m] + Długość statku [m] Ship breadth [m] - Ship breadth [m] + Szerokość statku [m] Ship draft [m] - Ship draft [m] + Szkic statku [m] Set of external faces of the ship hull - Set of external faces of the ship hull + Zestaw zewnętrznych powierzchni kadłuba statku - - Ship Weights masses [tons] - Ship Weights masses [tons] + + Set of weight instances + Set of weight instances + + + + Set of tank instances + Set of tank instances @@ -69,7 +59,7 @@ Plot the transversal areas curve - Plot the transversal areas curve + Drukuje krzywą poprzecznego obszaru @@ -82,18 +72,9 @@ Create a new ship instance on top of the hull geometry - Create a new ship instance on top of the hull geometry + Tworzenie nowej instancji statku na górze geometrii kadłuba - - Ship_CreateSim - - - Ship_CreateTank - - - Ship_GZ - Ship_Hydrostatics @@ -104,7 +85,7 @@ Plot the ship hydrostatics - Plot the ship hydrostatics + Drukuje hydrostatykę statku @@ -117,7 +98,7 @@ Load an example ship hull geometry. - Load an example ship hull geometry. + Załaduj przykład geometrii kadłuba statku. @@ -130,78 +111,84 @@ Plots the ship hull outline draw - Plots the ship hull outline draw + Drukuje zarys kadłuba statku - - Ship_RunSim - - - Ship_StopSim - - - Ship_TrackSim - - - Ship_Weights - ship_areas - + Draft Szkic - + Trim Ucinanie - + Displacement Wyporność - + Areas curve tool draft selected [m] Wybrano narzędzie kreślenia obszarów krzywych w [m] - + Plot the transversal areas curve - Plot the transversal areas curve + Drukuje krzywą poprzecznego obszaru - + Areas curve tool trim selected [deg] - Areas curve tool trim selected [deg] + Narzędzie przycinania obszarów krzywej wybrane [stopnie] + + + + ship_capacity + + + Tank capacity curve + Tank capacity curve + + + + Plot the tank capacity curve (level-volume curve) + Plot the tank capacity curve (level-volume curve) + + + + Plot the tank capacity curve + Plot the tank capacity curve + + + + Number of points + Liczba punktów ship_console - - Data saved - Dane zapisane - - - + Please create or load a ship hull geometry before using this tool Przed użyciem tego narzędzia, proszę utworzyć lub załadować geometrię kadłuba statku - + Ship objects can only be created on top of hull geometry (no solid found at selected objects) Obiekty statku mogą być utworzone tylko na górze geometrii kadłuba (brak odnalezionych stałych spośród wybranych obiektów) - + Computing hydrostatics Obliczanie hydrostatyki - + Computing external faces Obliczanie obszarów zewnętrznych @@ -216,69 +203,69 @@ Odnaleziono prawidłową sekcję statku - + Ship objects can only be created on top of hull geometry (no objects selected) - Ship objects can only be created on top of hull geometry (no objects selected) + Obiekty statku mogą być tworzone tylko w górnej części geometrii kadłuba (żaden obiekt nie został zaznaczony) - + A ship instance must be selected before using this tool (no objects selected) - A ship instance must be selected before using this tool (no objects selected) + Instancja statku musi być zaznaczona zanim użyje się tego narzędzia (żaden obiekt nie został wybrany) + + + + More than one ship have been selected (the extra ships will be ignored) + Więcej jak jeden statek został zaznaczony (dodatkowy statek zostanie zignorowany) + + + + A ship instance must be selected before using this tool (no valid ship found at the selected objects) + Instancja statku musi być zaznaczona zanim użyje się tego narzędzia (brak obowiązującego statku wśród zaznaczonych obiektów) + + + + Plot module is disabled, so I cannot perform the plot + Moduł wydruku jest wyłączony, nie można wykonać wydruku + + + + A ship instance must be selected before use this tool (no objects selected) + Instancja statku musi być zaznaczona zanim użyje się tego narzędzia (żaden obiekt nie został wybrany) + + + + More than one ship has been selected (just the first one will be used) + Więcej niż jeden statek został wybrany (tylko pierwszy zostanie użyty) - More than one ship have been selected (the extra ships will be ignored) - More than one ship have been selected (the extra ships will be ignored) - - - - A ship instance must be selected before using this tool (no valid ship found at the selected objects) - A ship instance must be selected before using this tool (no valid ship found at the selected objects) - - - - Plot module is disabled, so I cannot perform the plot - Plot module is disabled, so I cannot perform the plot - - - - Failure creating the folder - Failure creating the folder - - - - Failure writing to file - Failure writing to file - - - - A ship instance must be selected before use this tool (no objects selected) - A ship instance must be selected before use this tool (no objects selected) - - - - More than one ship has been selected (just the first one will be used) - More than one ship has been selected (just the first one will be used) - - - A ship instance must be selected before use this tool (novalid ships found in the selected objects) - A ship instance must be selected before use this tool (novalid ships found in the selected objects) + Instancja statku musi być zaznaczona zanim użyje się tego narzędzia (nie obowiązujący statek znaleziony wśród zaznaczonych obiektów) Plot module is disabled, tools cannot graph output curves - Plot module is disabled, tools cannot graph output curves + Moduł wydruku jest wyłączony, narzędzia programu nie są w stanie narysować krzywych wyjściowych - + Failure detecting external faces from the ship object - Failure detecting external faces from the ship object + Niepowodzenie w wykrywaniu zewnętrznych powierzchni obiektu statku - - Failure writing the file - Failure writing the file + + A tank instance must be selected before using this tool (no objects selected) + A tank instance must be selected before using this tool (no objects selected) + + + + More than one tank have been selected (the extra tanks will be ignored) + More than one tank have been selected (the extra tanks will be ignored) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + A tank instance must be selected before using this tool (no valid tank found at the selected objects) @@ -309,22 +296,22 @@ Rama główna - + Create a new ship Utwórz nowy statek - + Length Długość - + Breadth Szerokość - + Draft Szkic @@ -332,47 +319,47 @@ ship_hydrostatic - + Plot hydrostatics Wydruk hydrostatyki - + Trim Ucinanie - + Minimum draft Szkic minimalny - + Maximum draft Szkic maksymalny - + Number of points Liczba punktów - + Hydrostatics tool trim selected Wybrano narzędzie wykończenia hydrostatyki - + Hydrostatics tool minimum draft selected [m] Wybrano narzędzie minimalnego kreślenia hydrostatyki w [m] - + Hydrostatics tool maximum draft selected [m] Wybrano narzędzie maksymalnego kreślenia hydrostatyki w [m] - + Hydrostatics tool number of points selected Wybrano narzędzie liczba punktów hydrostatyki @@ -393,72 +380,180 @@ ship_outline - + Outline draw Rysowanie konturu - + Auto create Automatyczne tworzenie - + Delete all sections Usuń wszystkie sekcje - + Create sections Utwórz sekcje - + Transversal Poprzeczny - + Longitudinal Wzdłużny - + Water lines Linie wodne - + Transversal section positions [m] - Transversal section positions [m] + Położenie sekcji poprzecznych [m] - + Longitudinal section positions [m] - Longitudinal section positions [m] + Położenie sekcji podłużnych [m] - + Water line positions [m] - Water line positions [m] + Pozycja linii wodnej [m] - shipsim_create + ship_tank + + + True if it is a valid tank instance, False otherwise + True if it is a valid tank instance, False otherwise + + + + Volume of fluid [m^3] + Volume of fluid [m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Create a new tank + Create a new tank + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Tanks objects can only be created on top of its geometry (no objects selected) + + + + No solids found in the selected objects + No solids found in the selected objects + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Ship + Ship + - shipsim_stop - - - shipsim_track - - - shiptank_create - - - shiptank_gz - - - shiptank_weights + ship_weight + + + Create a new ship weight + Create a new ship weight + + + + True if it is a valid weight instance, False otherwise + True if it is a valid weight instance, False otherwise + + + + Mass [kg] + Mass [kg] + + + + Linear density [kg / m] + Linear density [kg / m] + + + + Area density [kg / m^3] + Area density [kg / m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Weight objects can only be created on top of its geometry (no objects selected) + + + + No geometrical shapes found in the selected objects + No geometrical shapes found in the selected objects + + + + Unknow object shapes selected + Unknow object shapes selected + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Create a new weight + Create a new weight + + + + Ship + Ship + + + + Mass + Mass + + + + Linear density + Linear density + + + + Area density + Area density + + + + Density + Density + diff --git a/src/Mod/Ship/resources/translations/Ship_pt-BR.qm b/src/Mod/Ship/resources/translations/Ship_pt-BR.qm index 71d47f7257..541af25ca5 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_pt-BR.qm and b/src/Mod/Ship/resources/translations/Ship_pt-BR.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_pt-BR.ts b/src/Mod/Ship/resources/translations/Ship_pt-BR.ts index a154dddfae..afab7f4d4f 100644 --- a/src/Mod/Ship/resources/translations/Ship_pt-BR.ts +++ b/src/Mod/Ship/resources/translations/Ship_pt-BR.ts @@ -4,30 +4,15 @@ Ship - + Ship design Design naval - + Weights Pesos - - - Ship Weights names - Nomes de pesos do navio - - - - Lightweight - Leve - - - - Ship Weights centers of gravity - Centros de gravidade dos pesos do navio - True if it is a valid ship instance, False otherwise @@ -54,9 +39,14 @@ Conjunto de faces exteriores do casco do navio - - Ship Weights masses [tons] - Massa do navio [toneladas] + + Set of weight instances + Conjunto de instâncias de peso + + + + Set of tank instances + Conjunto de instâncias de tanque @@ -85,15 +75,6 @@ Criar uma nova instância de navio em cima da geometria do casco - - Ship_CreateSim - - - Ship_CreateTank - - - Ship_GZ - Ship_Hydrostatics @@ -133,76 +114,82 @@ Plota o contorno do casco do navio - - Ship_RunSim - - - Ship_StopSim - - - Ship_TrackSim - - - Ship_Weights - ship_areas - + Draft Projeto - + Trim Aparar - + Displacement Deslocamento - + Areas curve tool draft selected [m] Ferramenta de esboço da área da curva selecionada - + Plot the transversal areas curve Traçar a curva das áreas transversais - + Areas curve tool trim selected [deg] Ferramenta "Aparar áreas curvas" selecionada [deg] - ship_console + ship_capacity - - Data saved - Dados salvos + + Tank capacity curve + Curva de capacidade de tanque - + + Plot the tank capacity curve (level-volume curve) + Traçar a curva de capacidade do tanque (curva de nível-volume) + + + + Plot the tank capacity curve + Traçar a curva de capacidade de tanque + + + + Number of points + Número de pontos + + + + ship_console + + Please create or load a ship hull geometry before using this tool Por favor crie ou carregue uma geometria de casco de navio antes de usar esta ferramenta - + Ship objects can only be created on top of hull geometry (no solid found at selected objects) Navios só podem ser criados a partir de geometria do casco (nenhum sólido encontrado nos objetos selecionados) - + Computing hydrostatics Calculando hidrostática - + Computing external faces Processando faces externas @@ -217,52 +204,42 @@ Encontrar qualquer seção do navio - + Ship objects can only be created on top of hull geometry (no objects selected) Navios só podem ser criados a partir de geometria do casco (nenhum objeto selecionado) - + A ship instance must be selected before using this tool (no objects selected) Uma instância do navio deve ser selecionada antes de usar esta ferramenta (não há objetos selecionados) - + More than one ship have been selected (the extra ships will be ignored) Vários navios foram selecionados (os navios extras serão ignorados) - + A ship instance must be selected before using this tool (no valid ship found at the selected objects) Uma instância de navio deve ser selecionada antes de usar esta ferramenta (nenhum navio válido encontrado nos objetos selecionados) - + Plot module is disabled, so I cannot perform the plot O módulo de impressão está desabilitado, logo não posso realizar a impressão - - Failure creating the folder - Falha ao criar pasta - - - - Failure writing to file - Falha de escrita no arquivo - - - + A ship instance must be selected before use this tool (no objects selected) Uma instância do navio deve ser selecionada antes de usar esta ferramenta (não há objetos selecionados) - + More than one ship has been selected (just the first one will be used) Vários navios foram selecionados (apenas o primeiro será usado) - + A ship instance must be selected before use this tool (novalid ships found in the selected objects) Uma instância de navio deve ser selecionada antes de usar esta ferramenta (nenhum navio válido encontrado nos objetos selecionados) @@ -272,14 +249,24 @@ O módulo de plotagem está desativado, não é possível traçar curvas de saída - + Failure detecting external faces from the ship object Falha na detecção das faces externas do navio - - Failure writing the file - Falha na gravação do arquivo + + A tank instance must be selected before using this tool (no objects selected) + Uma instância do tanque deve ser selecionada antes de usar esta ferramenta (não há objetos selecionados) + + + + More than one tank have been selected (the extra tanks will be ignored) + Mais de um tanque estão selecionados (os tanques extra serão ignorados) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + Uma instância de tanque deve ser selecionada antes de usar esta ferramenta (nenhum tanque válido encontrado nos objetos selecionados) @@ -310,22 +297,22 @@ Quadro principal - + Create a new ship Criar um novo navio - + Length Comprimento - + Breadth Amplitude - + Draft Projeto @@ -333,47 +320,47 @@ ship_hydrostatic - + Plot hydrostatics Plotar hidrostática - + Trim Aparar - + Minimum draft Calado mínimo - + Maximum draft Calado máximo - + Number of points Número de pontos - + Hydrostatics tool trim selected Ferramenta de corte hidrostático selecionada - + Hydrostatics tool minimum draft selected [m] Rascunho mínimo da ferramenta hidrostática selecionada [m] - + Hydrostatics tool maximum draft selected [m] Rascunho máximo da ferramenta hidrostática selecionada [m] - + Hydrostatics tool number of points selected Número de pontos da ferramenta hidrostática selecionada @@ -394,72 +381,180 @@ ship_outline - + Outline draw Contorno - + Auto create Criação automática - + Delete all sections Apagar todos os cortes - + Create sections Criar cortes - + Transversal Transversal - + Longitudinal Longitudinal - + Water lines Linhas de água - + Transversal section positions [m] Posição dos cortes transversais [m] - + Longitudinal section positions [m] Posição dos cortes longitudinais [m] - + Water line positions [m] Posição das linhas de água [m] - shipsim_create + ship_tank + + + True if it is a valid tank instance, False otherwise + Verdadeiro se for uma instância válida do tanque, Falso caso contrário + + + + Volume of fluid [m^3] + Volume do fluido [m^3] + + + + Density [kg / m^3] + Densidade [kg / m^3] + + + + Create a new tank + Criar um novo tanque + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Tanques só podem ser criados em cima de sua geometria (não há objetos selecionados) + + + + No solids found in the selected objects + Nenhum sólido encontrado nos objetos selecionados + + + + There are not ship objects to create weights into them + Não há navios para criar pesos neles + + + + Ship + Navio + - shipsim_stop - - - shipsim_track - - - shiptank_create - - - shiptank_gz - - - shiptank_weights + ship_weight + + + Create a new ship weight + Criar um novo peso de navio + + + + True if it is a valid weight instance, False otherwise + Verdadeiro se for uma instância válida do peso, Falso caso contrário + + + + Mass [kg] + Massa [kg] + + + + Linear density [kg / m] + Densidade linear [kg / m] + + + + Area density [kg / m^3] + Densidade de área [kg / m^3] + + + + Density [kg / m^3] + Densidade [kg / m^3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Tanques só podem ser criados em cima de sua geometria (não há objetos selecionados) + + + + No geometrical shapes found in the selected objects + Nenhuma forma geométrica encontrada nos objetos selecionados + + + + Unknow object shapes selected + Formas selecionadas desconhecidas + + + + There are not ship objects to create weights into them + Não há navios para criar pesos neles + + + + Create a new weight + Criar um novo peso + + + + Ship + Navio + + + + Mass + Massa + + + + Linear density + Densidade linear + + + + Area density + Densidade de área + + + + Density + Densidade + diff --git a/src/Mod/Ship/resources/translations/Ship_pt-PT.qm b/src/Mod/Ship/resources/translations/Ship_pt-PT.qm index a45d62d4c9..0c608d7058 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_pt-PT.qm and b/src/Mod/Ship/resources/translations/Ship_pt-PT.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_pt-PT.ts b/src/Mod/Ship/resources/translations/Ship_pt-PT.ts index 0c13717eb3..ff5a8063de 100644 --- a/src/Mod/Ship/resources/translations/Ship_pt-PT.ts +++ b/src/Mod/Ship/resources/translations/Ship_pt-PT.ts @@ -4,39 +4,24 @@ Ship - + Ship design - Desenho de Barco + Desenho de Barcos - + Weights Lastro - - - Ship Weights names - Nomes dos Lastros do Navio - - - - Lightweight - Lastro Leve - - - - Ship Weights centers of gravity - Lastros do Navio - centro da gravidade - True if it is a valid ship instance, False otherwise - True if it is a valid ship instance, False otherwise + Verdadeiro se for uma ocorrência válida de navio, Falso caso contrário Ship length [m] - Comprimento do Navio [m] + Comprimento do barco [m] @@ -51,12 +36,17 @@ Set of external faces of the ship hull - Set of external faces of the ship hull + Conjunto de faces exteriores do casco do navio - - Ship Weights masses [tons] - Ship Weights masses [tons] + + Set of weight instances + Set of weight instances + + + + Set of tank instances + Set of tank instances @@ -64,12 +54,12 @@ Areas curve - Areas curve + Curva de áreas Plot the transversal areas curve - Plot the transversal areas curve + Traçar a curva de áreas transversais @@ -85,15 +75,6 @@ Create a new ship instance on top of the hull geometry - - Ship_CreateSim - - - Ship_CreateTank - - - Ship_GZ - Ship_Hydrostatics @@ -104,7 +85,7 @@ Plot the ship hydrostatics - Plot the ship hydrostatics + Traçar hidrostática do navio @@ -112,7 +93,7 @@ Load an example ship geometry - Load an example ship geometry + Carregar um exemplo de geometria de navio @@ -125,90 +106,96 @@ Outline draw - Outline draw + Desenho do contorno Plots the ship hull outline draw - Plots the ship hull outline draw + Traça a linha de contorno do casco do navio - - Ship_RunSim - - - Ship_StopSim - - - Ship_TrackSim - - - Ship_Weights - ship_areas - + Draft Calado do Navio - + Trim Aparar - + Displacement Tonelagem - + Areas curve tool draft selected [m] Ferramenta das áreas da curva do calado selecionado [m] - + Plot the transversal areas curve - Plot the transversal areas curve + Traçar a curva de áreas transversais - + Areas curve tool trim selected [deg] Areas curve tool trim selected [deg] + + ship_capacity + + + Tank capacity curve + Tank capacity curve + + + + Plot the tank capacity curve (level-volume curve) + Plot the tank capacity curve (level-volume curve) + + + + Plot the tank capacity curve + Plot the tank capacity curve + + + + Number of points + Pontos + + ship_console - - Data saved - Dados guardados - - - + Please create or load a ship hull geometry before using this tool - Please create or load a ship hull geometry before using this tool + Por favor crie ou carregue uma geometria para o casco do barco antes de utilizar esta ferramenta - + Ship objects can only be created on top of hull geometry (no solid found at selected objects) - Ship objects can only be created on top of hull geometry (no solid found at selected objects) + Objetos do barco só podem ser criados no topo da geometria do casco (sólidos não encontrados nos objetos selecionados) - + Computing hydrostatics - Computing hydrostatics + Computando a hidrostática - + Computing external faces - Computing external faces + Computando as faces externas Computing sections - Computing sections + Computando secções @@ -216,52 +203,42 @@ Any valid ship section found - + Ship objects can only be created on top of hull geometry (no objects selected) - Ship objects can only be created on top of hull geometry (no objects selected) + Objetos do barco só podem ser criados no topo da geometria do casco (objetos não selecionados) - + A ship instance must be selected before using this tool (no objects selected) - A ship instance must be selected before using this tool (no objects selected) + Uma ocorrência de navio deve ser selecionada antes de usar esta ferramenta (não há objetos selecionados) - + More than one ship have been selected (the extra ships will be ignored) - More than one ship have been selected (the extra ships will be ignored) + Selecionou-se mais de um navio (os navios extras serão ignorados) - + A ship instance must be selected before using this tool (no valid ship found at the selected objects) A ship instance must be selected before using this tool (no valid ship found at the selected objects) - + Plot module is disabled, so I cannot perform the plot Plot module is disabled, so I cannot perform the plot - - Failure creating the folder - Failure creating the folder - - - - Failure writing to file - Failure writing to file - - - + A ship instance must be selected before use this tool (no objects selected) A ship instance must be selected before use this tool (no objects selected) - + More than one ship has been selected (just the first one will be used) - More than one ship has been selected (just the first one will be used) + Mais que um navio selecionado (apenas o primeiro será usado) - + A ship instance must be selected before use this tool (novalid ships found in the selected objects) A ship instance must be selected before use this tool (novalid ships found in the selected objects) @@ -271,14 +248,24 @@ Plot module is disabled, tools cannot graph output curves - + Failure detecting external faces from the ship object - Failure detecting external faces from the ship object + Falha a detetar faces externas do objeto de navio - - Failure writing the file - Failure writing the file + + A tank instance must be selected before using this tool (no objects selected) + A tank instance must be selected before using this tool (no objects selected) + + + + More than one tank have been selected (the extra tanks will be ignored) + More than one tank have been selected (the extra tanks will be ignored) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + A tank instance must be selected before using this tool (no valid tank found at the selected objects) @@ -286,12 +273,12 @@ Base line - Base line + Linha de base Free surface - Free surface + Superfície livre @@ -306,25 +293,25 @@ Main frame - Main frame + Caixilho principal - + Create a new ship Criar um novo navio - + Length Comprimento - + Breadth Breadth - + Draft Calado do Navio @@ -332,47 +319,47 @@ ship_hydrostatic - + Plot hydrostatics - Plot hydrostatics + Traçado da hidrostática - + Trim Aparar - + Minimum draft Minimum draft - + Maximum draft Maximum draft - + Number of points Pontos - + Hydrostatics tool trim selected Hydrostatics tool trim selected - + Hydrostatics tool minimum draft selected [m] Hydrostatics tool minimum draft selected [m] - + Hydrostatics tool maximum draft selected [m] Hydrostatics tool maximum draft selected [m] - + Hydrostatics tool number of points selected Hydrostatics tool number of points selected @@ -387,78 +374,186 @@ Select ship example geometry - Select ship example geometry + Selecione geometria exemplo de navio ship_outline - + Outline draw - Outline draw + Desenho do contorno - + Auto create - Auto create + Auto criar - + Delete all sections - Delete all sections + Apagar todas as secções - + Create sections - Create sections + Criar secções - + Transversal Transversal - + Longitudinal Longitudinal - + Water lines - Water lines + Linhas de água - + Transversal section positions [m] - Transversal section positions [m] + Posições da secção transversal [m] - + Longitudinal section positions [m] - Longitudinal section positions [m] + Posições da seção longitudinal [m] - + Water line positions [m] - Water line positions [m] + Posições da linha de água [m] - shipsim_create + ship_tank + + + True if it is a valid tank instance, False otherwise + True if it is a valid tank instance, False otherwise + + + + Volume of fluid [m^3] + Volume of fluid [m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Create a new tank + Create a new tank + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Tanks objects can only be created on top of its geometry (no objects selected) + + + + No solids found in the selected objects + No solids found in the selected objects + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Ship + Ship + - shipsim_stop - - - shipsim_track - - - shiptank_create - - - shiptank_gz - - - shiptank_weights + ship_weight + + + Create a new ship weight + Create a new ship weight + + + + True if it is a valid weight instance, False otherwise + True if it is a valid weight instance, False otherwise + + + + Mass [kg] + Mass [kg] + + + + Linear density [kg / m] + Linear density [kg / m] + + + + Area density [kg / m^3] + Area density [kg / m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Weight objects can only be created on top of its geometry (no objects selected) + + + + No geometrical shapes found in the selected objects + No geometrical shapes found in the selected objects + + + + Unknow object shapes selected + Unknow object shapes selected + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Create a new weight + Create a new weight + + + + Ship + Ship + + + + Mass + Mass + + + + Linear density + Linear density + + + + Area density + Area density + + + + Density + Density + diff --git a/src/Mod/Ship/resources/translations/Ship_ro.qm b/src/Mod/Ship/resources/translations/Ship_ro.qm index 1c9f0f4b33..9c3aa22306 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_ro.qm and b/src/Mod/Ship/resources/translations/Ship_ro.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_ro.ts b/src/Mod/Ship/resources/translations/Ship_ro.ts index 15ca133986..9df77cf700 100644 --- a/src/Mod/Ship/resources/translations/Ship_ro.ts +++ b/src/Mod/Ship/resources/translations/Ship_ro.ts @@ -4,30 +4,15 @@ Ship - + Ship design Proiectare nave - + Weights Greutati - - - Ship Weights names - Numele greutatilor pentru nave - - - - Lightweight - Usoare - - - - Ship Weights centers of gravity - Centre de gravitatie pentru greutatile navelor - True if it is a valid ship instance, False otherwise @@ -54,9 +39,14 @@ Set of external faces of the ship hull - - Ship Weights masses [tons] - Ship Weights masses [tons] + + Set of weight instances + Set of weight instances + + + + Set of tank instances + Set of tank instances @@ -85,15 +75,6 @@ Create a new ship instance on top of the hull geometry - - Ship_CreateSim - - - Ship_CreateTank - - - Ship_GZ - Ship_Hydrostatics @@ -133,75 +114,81 @@ Plots the ship hull outline draw - - Ship_RunSim - - - Ship_StopSim - - - Ship_TrackSim - - - Ship_Weights - ship_areas - + Draft Ciorna - + Trim Taiere - + Displacement Deplasare - + Areas curve tool draft selected [m] Ariile curbe - unelte selectate [m] - + Plot the transversal areas curve Plot the transversal areas curve - + Areas curve tool trim selected [deg] Areas curve tool trim selected [deg] - ship_console + ship_capacity - - Data saved - Datele au fost salvate + + Tank capacity curve + Tank capacity curve - + + Plot the tank capacity curve (level-volume curve) + Plot the tank capacity curve (level-volume curve) + + + + Plot the tank capacity curve + Plot the tank capacity curve + + + + Number of points + Numărul de puncte + + + + ship_console + + Please create or load a ship hull geometry before using this tool Creati sau incarcati geometria unui fuselaj de nava inaintea folosirii acestei unelte - + Ship objects can only be created on top of hull geometry (no solid found at selected objects) Obiectele-nava pot fi create doar pe o geometrie tip fuslaj (nici un solid printre obiectele selectate) - + Computing hydrostatics Calcul hidrostatic - + Computing external faces Calcul fete externe @@ -216,52 +203,42 @@ Nici o sectiune de nava nu a fost gasita - + Ship objects can only be created on top of hull geometry (no objects selected) Ship objects can only be created on top of hull geometry (no objects selected) - + A ship instance must be selected before using this tool (no objects selected) A ship instance must be selected before using this tool (no objects selected) - + More than one ship have been selected (the extra ships will be ignored) More than one ship have been selected (the extra ships will be ignored) - + A ship instance must be selected before using this tool (no valid ship found at the selected objects) A ship instance must be selected before using this tool (no valid ship found at the selected objects) - + Plot module is disabled, so I cannot perform the plot Plot module is disabled, so I cannot perform the plot - - Failure creating the folder - Failure creating the folder - - - - Failure writing to file - Failure writing to file - - - + A ship instance must be selected before use this tool (no objects selected) A ship instance must be selected before use this tool (no objects selected) - + More than one ship has been selected (just the first one will be used) More than one ship has been selected (just the first one will be used) - + A ship instance must be selected before use this tool (novalid ships found in the selected objects) A ship instance must be selected before use this tool (novalid ships found in the selected objects) @@ -271,14 +248,24 @@ Plot module is disabled, tools cannot graph output curves - + Failure detecting external faces from the ship object Failure detecting external faces from the ship object - - Failure writing the file - Failure writing the file + + A tank instance must be selected before using this tool (no objects selected) + A tank instance must be selected before using this tool (no objects selected) + + + + More than one tank have been selected (the extra tanks will be ignored) + More than one tank have been selected (the extra tanks will be ignored) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + A tank instance must be selected before using this tool (no valid tank found at the selected objects) @@ -309,22 +296,22 @@ Cadrul principal - + Create a new ship Creaza o nava noua - + Length Lungime - + Breadth Latimea - + Draft Ciorna @@ -332,47 +319,47 @@ ship_hydrostatic - + Plot hydrostatics Printeaza caracteristicile hidrostatice - + Trim Taiere - + Minimum draft Minim proiectat - + Maximum draft Maxim proiectat - + Number of points Numărul de puncte - + Hydrostatics tool trim selected Unealta hidrostatica - taiere selectata - + Hydrostatics tool minimum draft selected [m] Unealta hidrostatica - proiectare minima selectata - + Hydrostatics tool maximum draft selected [m] Unelte hidrostatice - ciorna maxima selectata [m] - + Hydrostatics tool number of points selected Unelte hidrostatice - numarul de puncte selectat [m] @@ -393,72 +380,180 @@ ship_outline - + Outline draw Deseneaza conturul - + Auto create Creare automata - + Delete all sections Stergeti toate sectiunile - + Create sections Creare sectiuni - + Transversal Transversal - + Longitudinal Longitudinal - + Water lines Linia apei - + Transversal section positions [m] - Transversal section positions [m] + Poziții secțiune transversală [m] - + Longitudinal section positions [m] - Longitudinal section positions [m] + Poziții secțiune longitudinală [m] - + Water line positions [m] - Water line positions [m] + Poziții linie de apă [m] - shipsim_create + ship_tank + + + True if it is a valid tank instance, False otherwise + True if it is a valid tank instance, False otherwise + + + + Volume of fluid [m^3] + Volume of fluid [m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Create a new tank + Create a new tank + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Tanks objects can only be created on top of its geometry (no objects selected) + + + + No solids found in the selected objects + No solids found in the selected objects + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Ship + Ship + - shipsim_stop - - - shipsim_track - - - shiptank_create - - - shiptank_gz - - - shiptank_weights + ship_weight + + + Create a new ship weight + Create a new ship weight + + + + True if it is a valid weight instance, False otherwise + True if it is a valid weight instance, False otherwise + + + + Mass [kg] + Mass [kg] + + + + Linear density [kg / m] + Linear density [kg / m] + + + + Area density [kg / m^3] + Area density [kg / m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Weight objects can only be created on top of its geometry (no objects selected) + + + + No geometrical shapes found in the selected objects + No geometrical shapes found in the selected objects + + + + Unknow object shapes selected + Unknow object shapes selected + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Create a new weight + Create a new weight + + + + Ship + Ship + + + + Mass + Mass + + + + Linear density + Linear density + + + + Area density + Area density + + + + Density + Density + diff --git a/src/Mod/Ship/resources/translations/Ship_ru.qm b/src/Mod/Ship/resources/translations/Ship_ru.qm index 1a7ce07999..dbdee382af 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_ru.qm and b/src/Mod/Ship/resources/translations/Ship_ru.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_ru.ts b/src/Mod/Ship/resources/translations/Ship_ru.ts index b6edf6559d..cb55e32f8a 100644 --- a/src/Mod/Ship/resources/translations/Ship_ru.ts +++ b/src/Mod/Ship/resources/translations/Ship_ru.ts @@ -4,59 +4,49 @@ Ship - + Ship design - Проектирование плавательных судов + Проектирование судна - + Weights Грузы - - - Ship Weights names - Названия грузов - - - - Lightweight - Вес порожнем - - - - Ship Weights centers of gravity - Центры тяжестей грузов - True if it is a valid ship instance, False otherwise - Если это правильный экземпляр корабля выберите Верно, выберите Неверно в противном случае + Истина - если это правильный экземпляр судна, Ложь - в противном случае Ship length [m] - Длина корабля [м] + Длина судна [m] Ship breadth [m] - Ширина корабля [м] + Ширина судна [m] Ship draft [m] - Осадка корабля [м] + Осадка судна [m] Set of external faces of the ship hull - Задать внешние грани корпуса судна + Задать внешние поверхности корпуса судна - - Ship Weights masses [tons] - Масса корабля [тонн] + + Set of weight instances + Set of weight instances + + + + Set of tank instances + Set of tank instances @@ -85,15 +75,6 @@ Создать экземпляр нового судна на вершине геометрии корпуса - - Ship_CreateSim - - - Ship_CreateTank - - - Ship_GZ - Ship_Hydrostatics @@ -112,12 +93,12 @@ Load an example ship geometry - Загрузка образца геометрии судна + Загрузить пример геометрии судна Load an example ship hull geometry. - Загрузить пример геометрии корпуса корабля. + Загрузить пример геометрии корпуса судна. @@ -133,75 +114,81 @@ Диаграммы внешних линий корпуса корабля - - Ship_RunSim - - - Ship_StopSim - - - Ship_TrackSim - - - Ship_Weights - ship_areas - + Draft - Высота осадки + Осадка - + Trim Обрезка - + Displacement Водоизмещение - + Areas curve tool draft selected [m] Заданное значение осадки при расчёте строевой по ватерлинии [м.] - + Plot the transversal areas curve Диаграмма кривой поперечных зон - + Areas curve tool trim selected [deg] Инструмент обрезка области кривой выбран [град] - ship_console + ship_capacity - - Data saved - Данные сохранены + + Tank capacity curve + Tank capacity curve - + + Plot the tank capacity curve (level-volume curve) + Plot the tank capacity curve (level-volume curve) + + + + Plot the tank capacity curve + Plot the tank capacity curve + + + + Number of points + Количество точек + + + + ship_console + + Please create or load a ship hull geometry before using this tool Необходимо создать или загрузить геометрию корпуса судна перед использованием этого инструмента - + Ship objects can only be created on top of hull geometry (no solid found at selected objects) Объекты судна могут быть созданы в верхней части геометрии корпуса (не найдено моделей среди выделенных объектов) - + Computing hydrostatics Вычисление гидростатики - + Computing external faces Вычисление наружных поверхностей @@ -216,52 +203,42 @@ Любая допустимая основная секция плавательного судна - + Ship objects can only be created on top of hull geometry (no objects selected) Объекты на корабле могут быть созданы только на верхней части корпуса (объекты не выбраны) - + A ship instance must be selected before using this tool (no objects selected) Экземпляр корабля должен быть выбран перед использованием этого средства (объекты не выбраны) - + More than one ship have been selected (the extra ships will be ignored) Были выбраны более чем один корабль (дополнительные корабли будут игнорироваться) - + A ship instance must be selected before using this tool (no valid ship found at the selected objects) Экземпляр корабля должен быть выбран перед использованием этого инструмента (не подходящий корабль для выбранных объектов) - + Plot module is disabled, so I cannot perform the plot Модуль диаграмм отключен, поэтому расчет диаграмм невозможен - - Failure creating the folder - Ошибка создания папки - - - - Failure writing to file - Ошибка записи в файл - - - + A ship instance must be selected before use this tool (no objects selected) Экземпляр корабля должен быть выбран перед использованием этого инструмента (объекты не выбраны) - + More than one ship has been selected (just the first one will be used) Был выбран более чем один корабль (только первый из них будет использоваться) - + A ship instance must be selected before use this tool (novalid ships found in the selected objects) Экземпляр корабля должен быть выбран прежде чем использовать этот инструмент (Обнаружен неподходящий корабль для выбранных объектов) @@ -271,14 +248,24 @@ Модуль диаграмм отключен, инструмент не может отобразить кривые - + Failure detecting external faces from the ship object - Failure detecting external faces from the ship object + Сбой обнаружения внешних граней судна - - Failure writing the file - Failure writing the file + + A tank instance must be selected before using this tool (no objects selected) + A tank instance must be selected before using this tool (no objects selected) + + + + More than one tank have been selected (the extra tanks will be ignored) + More than one tank have been selected (the extra tanks will be ignored) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + A tank instance must be selected before using this tool (no valid tank found at the selected objects) @@ -309,70 +296,70 @@ Мидель-шпангоут - + Create a new ship Задание параметров плавательного судна - + Length Длина - + Breadth Ширина - + Draft - Высота осадки + Осадка ship_hydrostatic - + Plot hydrostatics Расчёт гидростатики - + Trim Обрезка - + Minimum draft Минимальная осадка - + Maximum draft Максиимальная осадка - + Number of points Количество точек - + Hydrostatics tool trim selected Расчётный угол дифферента - + Hydrostatics tool minimum draft selected [m] Расчётное значение мнимальной осадки [м.] - + Hydrostatics tool maximum draft selected [m] Расчётное значение максимальной осадки [м.] - + Hydrostatics tool number of points selected Расчётное количество точек гидростатики @@ -393,72 +380,180 @@ ship_outline - + Outline draw Контурный чертёж - + Auto create Создать автоматически - + Delete all sections Удалить все сечения - + Create sections Создать сечения - + Transversal Поперечный - + Longitudinal Продольный - + Water lines Ватерлинии - + Transversal section positions [m] Положение поперечных секций [м.] - + Longitudinal section positions [m] Положение продольных секций [м.] - + Water line positions [m] Положение ватерлинии (м) - shipsim_create + ship_tank + + + True if it is a valid tank instance, False otherwise + True if it is a valid tank instance, False otherwise + + + + Volume of fluid [m^3] + Volume of fluid [m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Create a new tank + Create a new tank + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Tanks objects can only be created on top of its geometry (no objects selected) + + + + No solids found in the selected objects + No solids found in the selected objects + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Ship + Ship + - shipsim_stop - - - shipsim_track - - - shiptank_create - - - shiptank_gz - - - shiptank_weights + ship_weight + + + Create a new ship weight + Create a new ship weight + + + + True if it is a valid weight instance, False otherwise + True if it is a valid weight instance, False otherwise + + + + Mass [kg] + Mass [kg] + + + + Linear density [kg / m] + Linear density [kg / m] + + + + Area density [kg / m^3] + Area density [kg / m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Weight objects can only be created on top of its geometry (no objects selected) + + + + No geometrical shapes found in the selected objects + No geometrical shapes found in the selected objects + + + + Unknow object shapes selected + Unknow object shapes selected + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Create a new weight + Create a new weight + + + + Ship + Ship + + + + Mass + Mass + + + + Linear density + Linear density + + + + Area density + Area density + + + + Density + Density + diff --git a/src/Mod/Ship/resources/translations/Ship_sr.qm b/src/Mod/Ship/resources/translations/Ship_sr.qm new file mode 100644 index 0000000000..a1f8a79e75 Binary files /dev/null and b/src/Mod/Ship/resources/translations/Ship_sr.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_sr.ts b/src/Mod/Ship/resources/translations/Ship_sr.ts new file mode 100644 index 0000000000..f623d89ee9 --- /dev/null +++ b/src/Mod/Ship/resources/translations/Ship_sr.ts @@ -0,0 +1,559 @@ + + + + + Ship + + + Ship design + Дизајн брода + + + + Weights + Тежине + + + + True if it is a valid ship instance, False otherwise + Иcтинито ако је важећа брод иcтанца,Лажно у другом cлучају + + + + Ship length [m] + Дужина брода [m] + + + + Ship breadth [m] + Ширина брода [m] + + + + Ship draft [m] + Ship draft [m] + + + + Set of external faces of the ship hull + Cет cпољашњих површи трупа брода + + + + Set of weight instances + Set of weight instances + + + + Set of tank instances + Set of tank instances + + + + Ship_AreasCurve + + + Areas curve + Areas curve + + + + Plot the transversal areas curve + Plot the transversal areas curve + + + + Ship_CreateShip + + + Create a new ship + Направи нови брод + + + + Create a new ship instance on top of the hull geometry + Create a new ship instance on top of the hull geometry + + + + Ship_Hydrostatics + + + Hydrostatics + Хидроcтатика + + + + Plot the ship hydrostatics + Plot the ship hydrostatics + + + + Ship_LoadExample + + + Load an example ship geometry + Учитај пример геометрије брода + + + + Load an example ship hull geometry. + Учитај пример геометрије бродcког трупа. + + + + Ship_OutlineDraw + + + Outline draw + Outline draw + + + + Plots the ship hull outline draw + Plots the ship hull outline draw + + + + ship_areas + + + Draft + Цртеж + + + + Trim + Trim + + + + Displacement + Displacement + + + + Areas curve tool draft selected [m] + Areas curve tool draft selected [m] + + + + Plot the transversal areas curve + Plot the transversal areas curve + + + + Areas curve tool trim selected [deg] + Areas curve tool trim selected [deg] + + + + ship_capacity + + + Tank capacity curve + Tank capacity curve + + + + Plot the tank capacity curve (level-volume curve) + Plot the tank capacity curve (level-volume curve) + + + + Plot the tank capacity curve + Plot the tank capacity curve + + + + Number of points + Број тачака + + + + ship_console + + + Please create or load a ship hull geometry before using this tool + Please create or load a ship hull geometry before using this tool + + + + Ship objects can only be created on top of hull geometry (no solid found at selected objects) + Ship objects can only be created on top of hull geometry (no solid found at selected objects) + + + + Computing hydrostatics + Computing hydrostatics + + + + Computing external faces + Computing external faces + + + + Computing sections + Computing sections + + + + Any valid ship section found + Any valid ship section found + + + + Ship objects can only be created on top of hull geometry (no objects selected) + Ship objects can only be created on top of hull geometry (no objects selected) + + + + A ship instance must be selected before using this tool (no objects selected) + A ship instance must be selected before using this tool (no objects selected) + + + + More than one ship have been selected (the extra ships will be ignored) + More than one ship have been selected (the extra ships will be ignored) + + + + A ship instance must be selected before using this tool (no valid ship found at the selected objects) + A ship instance must be selected before using this tool (no valid ship found at the selected objects) + + + + Plot module is disabled, so I cannot perform the plot + Plot module is disabled, so I cannot perform the plot + + + + A ship instance must be selected before use this tool (no objects selected) + A ship instance must be selected before use this tool (no objects selected) + + + + More than one ship has been selected (just the first one will be used) + More than one ship has been selected (just the first one will be used) + + + + A ship instance must be selected before use this tool (novalid ships found in the selected objects) + A ship instance must be selected before use this tool (novalid ships found in the selected objects) + + + + Plot module is disabled, tools cannot graph output curves + Plot module is disabled, tools cannot graph output curves + + + + Failure detecting external faces from the ship object + Failure detecting external faces from the ship object + + + + A tank instance must be selected before using this tool (no objects selected) + A tank instance must be selected before using this tool (no objects selected) + + + + More than one tank have been selected (the extra tanks will be ignored) + More than one tank have been selected (the extra tanks will be ignored) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + + + + ship_create + + + Base line + Base line + + + + Free surface + Free surface + + + + Forward perpendicular + Forward perpendicular + + + + After perpendicular + After perpendicular + + + + Main frame + Главни костур + + + + Create a new ship + Направи нови брод + + + + Length + Дужина + + + + Breadth + Ширина + + + + Draft + Цртеж + + + + ship_hydrostatic + + + Plot hydrostatics + Plot hydrostatics + + + + Trim + Trim + + + + Minimum draft + Minimum draft + + + + Maximum draft + Maximum draft + + + + Number of points + Број тачака + + + + Hydrostatics tool trim selected + Hydrostatics tool trim selected + + + + Hydrostatics tool minimum draft selected [m] + Hydrostatics tool minimum draft selected [m] + + + + Hydrostatics tool maximum draft selected [m] + Hydrostatics tool maximum draft selected [m] + + + + Hydrostatics tool number of points selected + Hydrostatics tool number of points selected + + + + ship_load + + + Load example ship + Load example ship + + + + Select ship example geometry + Select ship example geometry + + + + ship_outline + + + Outline draw + Outline draw + + + + Auto create + Аутоматско креирање + + + + Delete all sections + Delete all sections + + + + Create sections + Create sections + + + + Transversal + Transversal + + + + Longitudinal + Longitudinal + + + + Water lines + Water lines + + + + Transversal section positions [m] + Transversal section positions [m] + + + + Longitudinal section positions [m] + Longitudinal section positions [m] + + + + Water line positions [m] + Water line positions [m] + + + + ship_tank + + + True if it is a valid tank instance, False otherwise + True if it is a valid tank instance, False otherwise + + + + Volume of fluid [m^3] + Запремина флуида [m^3] + + + + Density [kg / m^3] + Гуcтина [kg / m^3] + + + + Create a new tank + Create a new tank + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Tanks objects can only be created on top of its geometry (no objects selected) + + + + No solids found in the selected objects + Ниcу пронађена чврcта тела у одабраним објектима + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Ship + Брод + + + + ship_weight + + + Create a new ship weight + Create a new ship weight + + + + True if it is a valid weight instance, False otherwise + True if it is a valid weight instance, False otherwise + + + + Mass [kg] + Маcа [kg] + + + + Linear density [kg / m] + Линеарна гуcтина [kg / m] + + + + Area density [kg / m^3] + Area density [kg / m^3] + + + + Density [kg / m^3] + Гуcтина [kg / m^3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Weight objects can only be created on top of its geometry (no objects selected) + + + + No geometrical shapes found in the selected objects + Ниcу пронађени геометријcки облици у одабраним објектима + + + + Unknow object shapes selected + Unknow object shapes selected + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Create a new weight + Create a new weight + + + + Ship + Брод + + + + Mass + Маcа + + + + Linear density + Линеарна гуcтина + + + + Area density + Area density + + + + Density + Гуcтина + + + diff --git a/src/Mod/Ship/resources/translations/Ship_sv-SE.qm b/src/Mod/Ship/resources/translations/Ship_sv-SE.qm index ded2c67b30..75f24fcbc7 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_sv-SE.qm and b/src/Mod/Ship/resources/translations/Ship_sv-SE.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_sv-SE.ts b/src/Mod/Ship/resources/translations/Ship_sv-SE.ts index 08233cebf4..2a278ac204 100644 --- a/src/Mod/Ship/resources/translations/Ship_sv-SE.ts +++ b/src/Mod/Ship/resources/translations/Ship_sv-SE.ts @@ -4,30 +4,15 @@ Ship - + Ship design Fartygs design - + Weights Vikter - - - Ship Weights names - Fartygets vikters namn - - - - Lightweight - Lättvikt - - - - Ship Weights centers of gravity - Fartygets masscentrum - True if it is a valid ship instance, False otherwise @@ -54,9 +39,14 @@ Set of external faces of the ship hull - - Ship Weights masses [tons] - Ship Weights masses [tons] + + Set of weight instances + Set of weight instances + + + + Set of tank instances + Set of tank instances @@ -85,15 +75,6 @@ Create a new ship instance on top of the hull geometry - - Ship_CreateSim - - - Ship_CreateTank - - - Ship_GZ - Ship_Hydrostatics @@ -133,75 +114,81 @@ Plots the ship hull outline draw - - Ship_RunSim - - - Ship_StopSim - - - Ship_TrackSim - - - Ship_Weights - ship_areas - + Draft Djupgående - + Trim Trimma - + Displacement Deplacement - + Areas curve tool draft selected [m] Area kurvans djupgående verktyg valt [m] - + Plot the transversal areas curve Plot the transversal areas curve - + Areas curve tool trim selected [deg] Areas curve tool trim selected [deg] - ship_console + ship_capacity - - Data saved - Data sparad + + Tank capacity curve + Tank capacity curve - + + Plot the tank capacity curve (level-volume curve) + Plot the tank capacity curve (level-volume curve) + + + + Plot the tank capacity curve + Plot the tank capacity curve + + + + Number of points + Antal punkter + + + + ship_console + + Please create or load a ship hull geometry before using this tool Var god skapa eller öppna ett fartygs skrov geometri före - + Ship objects can only be created on top of hull geometry (no solid found at selected objects) Farygs objekt kan endast skapas ovanpå toppen av skrovgeometrin (ingen solid funnen vid valda objekt) - + Computing hydrostatics Beräknar hydrostatik - + Computing external faces Beräknar externa ytor @@ -216,52 +203,42 @@ Ingen giltig fartygs sektion funnen - + Ship objects can only be created on top of hull geometry (no objects selected) Ship objects can only be created on top of hull geometry (no objects selected) - + A ship instance must be selected before using this tool (no objects selected) A ship instance must be selected before using this tool (no objects selected) - + More than one ship have been selected (the extra ships will be ignored) More than one ship have been selected (the extra ships will be ignored) - + A ship instance must be selected before using this tool (no valid ship found at the selected objects) A ship instance must be selected before using this tool (no valid ship found at the selected objects) - + Plot module is disabled, so I cannot perform the plot Plot module is disabled, so I cannot perform the plot - - Failure creating the folder - Failure creating the folder - - - - Failure writing to file - Failure writing to file - - - + A ship instance must be selected before use this tool (no objects selected) A ship instance must be selected before use this tool (no objects selected) - + More than one ship has been selected (just the first one will be used) More than one ship has been selected (just the first one will be used) - + A ship instance must be selected before use this tool (novalid ships found in the selected objects) A ship instance must be selected before use this tool (novalid ships found in the selected objects) @@ -271,14 +248,24 @@ Plot module is disabled, tools cannot graph output curves - + Failure detecting external faces from the ship object Failure detecting external faces from the ship object - - Failure writing the file - Failure writing the file + + A tank instance must be selected before using this tool (no objects selected) + A tank instance must be selected before using this tool (no objects selected) + + + + More than one tank have been selected (the extra tanks will be ignored) + More than one tank have been selected (the extra tanks will be ignored) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + A tank instance must be selected before using this tool (no valid tank found at the selected objects) @@ -309,22 +296,22 @@ Huvud spant - + Create a new ship Skapa ett nytt fartyg - + Length Längd - + Breadth Bredd - + Draft Djupgående @@ -332,47 +319,47 @@ ship_hydrostatic - + Plot hydrostatics Skriv ut hydrostatiken - + Trim Trimma - + Minimum draft Minimum djupgående - + Maximum draft Maximum djupgående - + Number of points Antal punkter - + Hydrostatics tool trim selected Hydrostatikens trim verktyg valt - + Hydrostatics tool minimum draft selected [m] Hydrostatiska verktyget minimum djupgående valt [m] - + Hydrostatics tool maximum draft selected [m] Hydrostatiska verktyget maximum djupgående valt [m] - + Hydrostatics tool number of points selected Hydrostatiska verktyget antal punkter valt [m] @@ -393,72 +380,180 @@ ship_outline - + Outline draw Skissera - + Auto create Auto skapa - + Delete all sections Radera alla sektioner - + Create sections Skapa sektioner - + Transversal Transversal - + Longitudinal Longitudinell - + Water lines Vattenlinjer - + Transversal section positions [m] Transversal section positions [m] - + Longitudinal section positions [m] Longitudinal section positions [m] - + Water line positions [m] Water line positions [m] - shipsim_create + ship_tank + + + True if it is a valid tank instance, False otherwise + True if it is a valid tank instance, False otherwise + + + + Volume of fluid [m^3] + Volume of fluid [m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Create a new tank + Create a new tank + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Tanks objects can only be created on top of its geometry (no objects selected) + + + + No solids found in the selected objects + No solids found in the selected objects + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Ship + Ship + - shipsim_stop - - - shipsim_track - - - shiptank_create - - - shiptank_gz - - - shiptank_weights + ship_weight + + + Create a new ship weight + Create a new ship weight + + + + True if it is a valid weight instance, False otherwise + True if it is a valid weight instance, False otherwise + + + + Mass [kg] + Mass [kg] + + + + Linear density [kg / m] + Linear density [kg / m] + + + + Area density [kg / m^3] + Area density [kg / m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Weight objects can only be created on top of its geometry (no objects selected) + + + + No geometrical shapes found in the selected objects + No geometrical shapes found in the selected objects + + + + Unknow object shapes selected + Unknow object shapes selected + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Create a new weight + Create a new weight + + + + Ship + Ship + + + + Mass + Mass + + + + Linear density + Linear density + + + + Area density + Area density + + + + Density + Density + diff --git a/src/Mod/Ship/resources/translations/Ship_uk.qm b/src/Mod/Ship/resources/translations/Ship_uk.qm index e654f82022..a0bc1340a6 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_uk.qm and b/src/Mod/Ship/resources/translations/Ship_uk.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_uk.ts b/src/Mod/Ship/resources/translations/Ship_uk.ts index 79c811a18c..aeffb267f0 100644 --- a/src/Mod/Ship/resources/translations/Ship_uk.ts +++ b/src/Mod/Ship/resources/translations/Ship_uk.ts @@ -4,30 +4,15 @@ Ship - + Ship design Проектування корабля - + Weights Weights - - - Ship Weights names - Ship Weights names - - - - Lightweight - Lightweight - - - - Ship Weights centers of gravity - Ship Weights centers of gravity - True if it is a valid ship instance, False otherwise @@ -54,9 +39,14 @@ Set of external faces of the ship hull - - Ship Weights masses [tons] - Ship Weights masses [tons] + + Set of weight instances + Set of weight instances + + + + Set of tank instances + Set of tank instances @@ -85,15 +75,6 @@ Create a new ship instance on top of the hull geometry - - Ship_CreateSim - - - Ship_CreateTank - - - Ship_GZ - Ship_Hydrostatics @@ -133,75 +114,81 @@ Plots the ship hull outline draw - - Ship_RunSim - - - Ship_StopSim - - - Ship_TrackSim - - - Ship_Weights - ship_areas - + Draft - Draft + Креслення - + Trim Обрізати - + Displacement Водотоннажність - + Areas curve tool draft selected [m] Areas curve tool draft selected [m] - + Plot the transversal areas curve Plot the transversal areas curve - + Areas curve tool trim selected [deg] Areas curve tool trim selected [deg] - ship_console + ship_capacity - - Data saved - Дані збережено + + Tank capacity curve + Tank capacity curve - + + Plot the tank capacity curve (level-volume curve) + Plot the tank capacity curve (level-volume curve) + + + + Plot the tank capacity curve + Plot the tank capacity curve + + + + Number of points + Кількість точок + + + + ship_console + + Please create or load a ship hull geometry before using this tool Please create or load a ship hull geometry before using this tool - + Ship objects can only be created on top of hull geometry (no solid found at selected objects) Ship objects can only be created on top of hull geometry (no solid found at selected objects) - + Computing hydrostatics Computing hydrostatics - + Computing external faces Обчислення зовнішніх поверхонь @@ -216,52 +203,42 @@ Any valid ship section found - + Ship objects can only be created on top of hull geometry (no objects selected) Ship objects can only be created on top of hull geometry (no objects selected) - + A ship instance must be selected before using this tool (no objects selected) A ship instance must be selected before using this tool (no objects selected) - + More than one ship have been selected (the extra ships will be ignored) More than one ship have been selected (the extra ships will be ignored) - + A ship instance must be selected before using this tool (no valid ship found at the selected objects) A ship instance must be selected before using this tool (no valid ship found at the selected objects) - + Plot module is disabled, so I cannot perform the plot Plot module is disabled, so I cannot perform the plot - - Failure creating the folder - Failure creating the folder - - - - Failure writing to file - Failure writing to file - - - + A ship instance must be selected before use this tool (no objects selected) A ship instance must be selected before use this tool (no objects selected) - + More than one ship has been selected (just the first one will be used) More than one ship has been selected (just the first one will be used) - + A ship instance must be selected before use this tool (novalid ships found in the selected objects) A ship instance must be selected before use this tool (novalid ships found in the selected objects) @@ -271,14 +248,24 @@ Plot module is disabled, tools cannot graph output curves - + Failure detecting external faces from the ship object Failure detecting external faces from the ship object - - Failure writing the file - Failure writing the file + + A tank instance must be selected before using this tool (no objects selected) + A tank instance must be selected before using this tool (no objects selected) + + + + More than one tank have been selected (the extra tanks will be ignored) + More than one tank have been selected (the extra tanks will be ignored) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + A tank instance must be selected before using this tool (no valid tank found at the selected objects) @@ -309,70 +296,70 @@ Main frame - + Create a new ship Створити новий корабель - + Length Довжина - + Breadth Breadth - + Draft - Draft + Креслення ship_hydrostatic - + Plot hydrostatics Plot hydrostatics - + Trim Обрізати - + Minimum draft Minimum draft - + Maximum draft Maximum draft - + Number of points Кількість точок - + Hydrostatics tool trim selected Hydrostatics tool trim selected - + Hydrostatics tool minimum draft selected [m] Hydrostatics tool minimum draft selected [m] - + Hydrostatics tool maximum draft selected [m] Hydrostatics tool maximum draft selected [m] - + Hydrostatics tool number of points selected Hydrostatics tool number of points selected @@ -393,72 +380,180 @@ ship_outline - + Outline draw Outline draw - + Auto create Auto create - + Delete all sections - Delete all sections + Видалити всі розділи - + Create sections Create sections - + Transversal Transversal - + Longitudinal Longitudinal - + Water lines Water lines - + Transversal section positions [m] Transversal section positions [m] - + Longitudinal section positions [m] Longitudinal section positions [m] - + Water line positions [m] Water line positions [m] - shipsim_create + ship_tank + + + True if it is a valid tank instance, False otherwise + True if it is a valid tank instance, False otherwise + + + + Volume of fluid [m^3] + Volume of fluid [m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Create a new tank + Create a new tank + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Tanks objects can only be created on top of its geometry (no objects selected) + + + + No solids found in the selected objects + No solids found in the selected objects + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Ship + Ship + - shipsim_stop - - - shipsim_track - - - shiptank_create - - - shiptank_gz - - - shiptank_weights + ship_weight + + + Create a new ship weight + Create a new ship weight + + + + True if it is a valid weight instance, False otherwise + True if it is a valid weight instance, False otherwise + + + + Mass [kg] + Mass [kg] + + + + Linear density [kg / m] + Linear density [kg / m] + + + + Area density [kg / m^3] + Area density [kg / m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Weight objects can only be created on top of its geometry (no objects selected) + + + + No geometrical shapes found in the selected objects + No geometrical shapes found in the selected objects + + + + Unknow object shapes selected + Unknow object shapes selected + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Create a new weight + Create a new weight + + + + Ship + Ship + + + + Mass + Mass + + + + Linear density + Linear density + + + + Area density + Area density + + + + Density + Density + diff --git a/src/Mod/Ship/resources/translations/Ship_zh-CN.qm b/src/Mod/Ship/resources/translations/Ship_zh-CN.qm index cd6febf3c0..564672e057 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_zh-CN.qm and b/src/Mod/Ship/resources/translations/Ship_zh-CN.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_zh-CN.ts b/src/Mod/Ship/resources/translations/Ship_zh-CN.ts index c2c63f4254..b3845617db 100644 --- a/src/Mod/Ship/resources/translations/Ship_zh-CN.ts +++ b/src/Mod/Ship/resources/translations/Ship_zh-CN.ts @@ -4,30 +4,15 @@ Ship - + Ship design 船舶设计 - + Weights 重量 - - - Ship Weights names - Ship Weights names - - - - Lightweight - 轻量 - - - - Ship Weights centers of gravity - 船舶重心 - True if it is a valid ship instance, False otherwise @@ -54,9 +39,14 @@ Set of external faces of the ship hull - - Ship Weights masses [tons] - Ship Weights masses [tons] + + Set of weight instances + Set of weight instances + + + + Set of tank instances + Set of tank instances @@ -85,15 +75,6 @@ Create a new ship instance on top of the hull geometry - - Ship_CreateSim - - - Ship_CreateTank - - - Ship_GZ - Ship_Hydrostatics @@ -133,75 +114,81 @@ Plots the ship hull outline draw - - Ship_RunSim - - - Ship_StopSim - - - Ship_TrackSim - - - Ship_Weights - ship_areas - + Draft 吃水深度 - + Trim 修剪 - + Displacement 位移 - + Areas curve tool draft selected [m] Areas curve tool draft selected [m] - + Plot the transversal areas curve Plot the transversal areas curve - + Areas curve tool trim selected [deg] Areas curve tool trim selected [deg] - ship_console + ship_capacity - - Data saved - 数据已保存 + + Tank capacity curve + Tank capacity curve - + + Plot the tank capacity curve (level-volume curve) + Plot the tank capacity curve (level-volume curve) + + + + Plot the tank capacity curve + Plot the tank capacity curve + + + + Number of points + 点的数量 + + + + ship_console + + Please create or load a ship hull geometry before using this tool 在使用该工具前请创建或加载一个船体几何 - + Ship objects can only be created on top of hull geometry (no solid found at selected objects) 船舶对象只能创建在船体几何之上(选定对象中未发现实体) - + Computing hydrostatics 计算流体静力学 - + Computing external faces 计算外表面 @@ -216,52 +203,42 @@ Any valid ship section found - + Ship objects can only be created on top of hull geometry (no objects selected) Ship objects can only be created on top of hull geometry (no objects selected) - + A ship instance must be selected before using this tool (no objects selected) A ship instance must be selected before using this tool (no objects selected) - + More than one ship have been selected (the extra ships will be ignored) More than one ship have been selected (the extra ships will be ignored) - + A ship instance must be selected before using this tool (no valid ship found at the selected objects) A ship instance must be selected before using this tool (no valid ship found at the selected objects) - + Plot module is disabled, so I cannot perform the plot Plot module is disabled, so I cannot perform the plot - - Failure creating the folder - Failure creating the folder - - - - Failure writing to file - Failure writing to file - - - + A ship instance must be selected before use this tool (no objects selected) A ship instance must be selected before use this tool (no objects selected) - + More than one ship has been selected (just the first one will be used) More than one ship has been selected (just the first one will be used) - + A ship instance must be selected before use this tool (novalid ships found in the selected objects) A ship instance must be selected before use this tool (novalid ships found in the selected objects) @@ -271,14 +248,24 @@ Plot module is disabled, tools cannot graph output curves - + Failure detecting external faces from the ship object Failure detecting external faces from the ship object - - Failure writing the file - Failure writing the file + + A tank instance must be selected before using this tool (no objects selected) + A tank instance must be selected before using this tool (no objects selected) + + + + More than one tank have been selected (the extra tanks will be ignored) + More than one tank have been selected (the extra tanks will be ignored) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + A tank instance must be selected before using this tool (no valid tank found at the selected objects) @@ -309,22 +296,22 @@ 主框架 - + Create a new ship 创建新的船舶 - + Length 长度 - + Breadth 广度 - + Draft 吃水深度 @@ -332,47 +319,47 @@ ship_hydrostatic - + Plot hydrostatics 绘制流体静力曲线 - + Trim 修剪 - + Minimum draft 最小吃水深度 - + Maximum draft 最大吃水深度 - + Number of points 点的数量 - + Hydrostatics tool trim selected Hydrostatics tool trim selected - + Hydrostatics tool minimum draft selected [m] 流体力学工具最小吃水深度选择[m] - + Hydrostatics tool maximum draft selected [m] 流体力学工具最大吃水深度选择[m] - + Hydrostatics tool number of points selected 流体力学工具点数选择 @@ -393,72 +380,180 @@ ship_outline - + Outline draw 外轮廓绘制 - + Auto create 自动创建 - + Delete all sections 删除所有剖面 - + Create sections 创建剖面 - + Transversal 横向 - + Longitudinal 纵向 - + Water lines 水位线 - + Transversal section positions [m] Transversal section positions [m] - + Longitudinal section positions [m] Longitudinal section positions [m] - + Water line positions [m] Water line positions [m] - shipsim_create + ship_tank + + + True if it is a valid tank instance, False otherwise + True if it is a valid tank instance, False otherwise + + + + Volume of fluid [m^3] + Volume of fluid [m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Create a new tank + Create a new tank + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Tanks objects can only be created on top of its geometry (no objects selected) + + + + No solids found in the selected objects + No solids found in the selected objects + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Ship + Ship + - shipsim_stop - - - shipsim_track - - - shiptank_create - - - shiptank_gz - - - shiptank_weights + ship_weight + + + Create a new ship weight + Create a new ship weight + + + + True if it is a valid weight instance, False otherwise + True if it is a valid weight instance, False otherwise + + + + Mass [kg] + Mass [kg] + + + + Linear density [kg / m] + Linear density [kg / m] + + + + Area density [kg / m^3] + Area density [kg / m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Weight objects can only be created on top of its geometry (no objects selected) + + + + No geometrical shapes found in the selected objects + No geometrical shapes found in the selected objects + + + + Unknow object shapes selected + Unknow object shapes selected + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Create a new weight + Create a new weight + + + + Ship + Ship + + + + Mass + Mass + + + + Linear density + Linear density + + + + Area density + Area density + + + + Density + Density + diff --git a/src/Mod/Ship/resources/translations/Ship_zh-TW.qm b/src/Mod/Ship/resources/translations/Ship_zh-TW.qm index e512f4f19f..3388214536 100644 Binary files a/src/Mod/Ship/resources/translations/Ship_zh-TW.qm and b/src/Mod/Ship/resources/translations/Ship_zh-TW.qm differ diff --git a/src/Mod/Ship/resources/translations/Ship_zh-TW.ts b/src/Mod/Ship/resources/translations/Ship_zh-TW.ts index 07ef8f3151..c8a2f8b177 100644 --- a/src/Mod/Ship/resources/translations/Ship_zh-TW.ts +++ b/src/Mod/Ship/resources/translations/Ship_zh-TW.ts @@ -4,30 +4,15 @@ Ship - + Ship design 船舶設計 - + Weights 重量 - - - Ship Weights names - Ship Weights names - - - - Lightweight - 輕量 - - - - Ship Weights centers of gravity - 船舶重量之重心 - True if it is a valid ship instance, False otherwise @@ -54,9 +39,14 @@ Set of external faces of the ship hull - - Ship Weights masses [tons] - Ship Weights masses [tons] + + Set of weight instances + Set of weight instances + + + + Set of tank instances + Set of tank instances @@ -85,15 +75,6 @@ Create a new ship instance on top of the hull geometry - - Ship_CreateSim - - - Ship_CreateTank - - - Ship_GZ - Ship_Hydrostatics @@ -133,75 +114,81 @@ Plots the ship hull outline draw - - Ship_RunSim - - - Ship_StopSim - - - Ship_TrackSim - - - Ship_Weights - ship_areas - + Draft 拔模角 - + Trim 修剪 - + Displacement 位移 - + Areas curve tool draft selected [m] Areas curve tool draft selected [m] - + Plot the transversal areas curve Plot the transversal areas curve - + Areas curve tool trim selected [deg] Areas curve tool trim selected [deg] - ship_console + ship_capacity - - Data saved - 資料已儲存 + + Tank capacity curve + Tank capacity curve - + + Plot the tank capacity curve (level-volume curve) + Plot the tank capacity curve (level-volume curve) + + + + Plot the tank capacity curve + Plot the tank capacity curve + + + + Number of points + 點數 + + + + ship_console + + Please create or load a ship hull geometry before using this tool Please create or load a ship hull geometry before using this tool - + Ship objects can only be created on top of hull geometry (no solid found at selected objects) Ship objects can only be created on top of hull geometry (no solid found at selected objects) - + Computing hydrostatics 運算流體靜力學 - + Computing external faces Computing external faces @@ -216,52 +203,42 @@ Any valid ship section found - + Ship objects can only be created on top of hull geometry (no objects selected) Ship objects can only be created on top of hull geometry (no objects selected) - + A ship instance must be selected before using this tool (no objects selected) A ship instance must be selected before using this tool (no objects selected) - + More than one ship have been selected (the extra ships will be ignored) More than one ship have been selected (the extra ships will be ignored) - + A ship instance must be selected before using this tool (no valid ship found at the selected objects) A ship instance must be selected before using this tool (no valid ship found at the selected objects) - + Plot module is disabled, so I cannot perform the plot Plot module is disabled, so I cannot perform the plot - - Failure creating the folder - 建立資料夾失敗 - - - - Failure writing to file - 寫入檔案失敗 - - - + A ship instance must be selected before use this tool (no objects selected) A ship instance must be selected before use this tool (no objects selected) - + More than one ship has been selected (just the first one will be used) 選擇了超過一艘船(僅有第1艘會被使用) - + A ship instance must be selected before use this tool (novalid ships found in the selected objects) A ship instance must be selected before use this tool (novalid ships found in the selected objects) @@ -271,14 +248,24 @@ Plot module is disabled, tools cannot graph output curves - + Failure detecting external faces from the ship object Failure detecting external faces from the ship object - - Failure writing the file - Failure writing the file + + A tank instance must be selected before using this tool (no objects selected) + A tank instance must be selected before using this tool (no objects selected) + + + + More than one tank have been selected (the extra tanks will be ignored) + More than one tank have been selected (the extra tanks will be ignored) + + + + A tank instance must be selected before using this tool (no valid tank found at the selected objects) + A tank instance must be selected before using this tool (no valid tank found at the selected objects) @@ -309,22 +296,22 @@ 主框架 - + Create a new ship 建立新的船舶 - + Length 長度 - + Breadth 寬度 - + Draft 拔模角 @@ -332,47 +319,47 @@ ship_hydrostatic - + Plot hydrostatics Plot hydrostatics - + Trim 修剪 - + Minimum draft 最小吃水量 - + Maximum draft 最大吃水量 - + Number of points 點數 - + Hydrostatics tool trim selected Hydrostatics tool trim selected - + Hydrostatics tool minimum draft selected [m] Hydrostatics tool minimum draft selected [m] - + Hydrostatics tool maximum draft selected [m] Hydrostatics tool maximum draft selected [m] - + Hydrostatics tool number of points selected Hydrostatics tool number of points selected @@ -393,72 +380,180 @@ ship_outline - + Outline draw Outline draw - + Auto create 自動建立 - + Delete all sections 移除所有選取 - + Create sections Create sections - + Transversal 橫向 - + Longitudinal 縱向 - + Water lines 水線 - + Transversal section positions [m] Transversal section positions [m] - + Longitudinal section positions [m] Longitudinal section positions [m] - + Water line positions [m] 水線位置 [m] - shipsim_create + ship_tank + + + True if it is a valid tank instance, False otherwise + True if it is a valid tank instance, False otherwise + + + + Volume of fluid [m^3] + Volume of fluid [m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Create a new tank + Create a new tank + + + + Tanks objects can only be created on top of its geometry (no objects selected) + Tanks objects can only be created on top of its geometry (no objects selected) + + + + No solids found in the selected objects + No solids found in the selected objects + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Ship + Ship + - shipsim_stop - - - shipsim_track - - - shiptank_create - - - shiptank_gz - - - shiptank_weights + ship_weight + + + Create a new ship weight + Create a new ship weight + + + + True if it is a valid weight instance, False otherwise + True if it is a valid weight instance, False otherwise + + + + Mass [kg] + Mass [kg] + + + + Linear density [kg / m] + Linear density [kg / m] + + + + Area density [kg / m^3] + Area density [kg / m^3] + + + + Density [kg / m^3] + Density [kg / m^3] + + + + Weight objects can only be created on top of its geometry (no objects selected) + Weight objects can only be created on top of its geometry (no objects selected) + + + + No geometrical shapes found in the selected objects + No geometrical shapes found in the selected objects + + + + Unknow object shapes selected + Unknow object shapes selected + + + + There are not ship objects to create weights into them + There are not ship objects to create weights into them + + + + Create a new weight + Create a new weight + + + + Ship + Ship + + + + Mass + Mass + + + + Linear density + Linear density + + + + Area density + Area density + + + + Density + Density + diff --git a/src/Mod/Sketcher/Gui/Resources/Sketcher.qrc b/src/Mod/Sketcher/Gui/Resources/Sketcher.qrc index 416828ee39..dd46a433de 100644 --- a/src/Mod/Sketcher/Gui/Resources/Sketcher.qrc +++ b/src/Mod/Sketcher/Gui/Resources/Sketcher.qrc @@ -153,5 +153,6 @@ translations/Sketcher_uk.qm translations/Sketcher_zh-CN.qm translations/Sketcher_zh-TW.qm + translations/Sketcher_sr.qm diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_af.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_af.qm index 7c9264a230..fddc8862cf 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_af.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_af.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_af.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_af.ts index 406213482e..ea66a8622d 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_af.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_af.ts @@ -11,12 +11,12 @@ Close Shape - + Close Shape Produce closed shape by Link end point of element with next elements' starting point - + Produce closed shape by Link end point of element with next elements' starting point @@ -85,27 +85,27 @@ Create a conic - + Create a conic Create a conic in the sketch - + Create a conic in the sketch Ellipse by center, major radius, point - + Ellipse by center, major radius, point Ellipse by Periapsis, apoapsis, minor radius - + Ellipse by Periapsis, apoapsis, minor radius Arc of ellipse by center, major radius, endpoints - + Arc of ellipse by center, major radius, endpoints @@ -118,42 +118,42 @@ Create regular polygon - + Create regular polygon Create an regular polygon in the sketcher - + Create an regular polygon in the sketcher Triangle - + Triangle Square - + Square Pentagon - + Pentagon Hexagon - + Hexagon Heptagon - + Heptagon Octagon - + Octagon @@ -166,12 +166,12 @@ Connect Edges - + Connect Edges Link end point of element with next elements' starting point - + Link end point of element with next elements' starting point @@ -318,12 +318,12 @@ Constrain InternalAlignment - + Constrain InternalAlignment Constrains an element to be aligned with the internal geometry of another element - + Constrains an element to be aligned with the internal geometry of another element @@ -430,12 +430,12 @@ Constrain refraction (Snell's law') - + Constrain refraction (Snell's law') Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. @@ -568,12 +568,12 @@ Create an arc of ellipse - + Create an arc of ellipse Create an arc of ellipse in the sketch - + Create an arc of ellipse in the sketch @@ -622,12 +622,12 @@ Create ellipse by 3 points - + Create ellipse by 3 points Create an ellipse by 3 points in the sketch - + Create an ellipse by 3 points in the sketch @@ -640,12 +640,12 @@ Create ellipse by center - + Create ellipse by center Create an ellipse by center in the sketch - + Create an ellipse by center in the sketch @@ -680,12 +680,12 @@ Create heptagon - + Create heptagon Create a heptagon in the sketch - + Create a heptagon in the sketch @@ -698,12 +698,12 @@ Create hexagon - + Create hexagon Create a hexagon in the sketch - + Create a hexagon in the sketch @@ -734,12 +734,12 @@ Create octagon - + Create octagon Create an octagon in the sketch - + Create an octagon in the sketch @@ -752,12 +752,12 @@ Create pentagon - + Create pentagon Create a pentagon in the sketch - + Create a pentagon in the sketch @@ -846,12 +846,12 @@ Create square - + Create square Create a square in the sketch - + Create a square in the sketch @@ -882,12 +882,12 @@ Create equilateral triangle - + Create equilateral triangle Create an equilateral triangle in the sketch - + Create an equilateral triangle in the sketch @@ -905,7 +905,7 @@ Edit the selected sketch - + Edit the selected sketch @@ -973,7 +973,7 @@ Merge sketches - + Merge sketches @@ -983,7 +983,7 @@ Select at least two sketches, please. - + Select at least two sketches, please. @@ -1051,12 +1051,12 @@ Show/hide internal geometry - + Show/hide internal geometry Show all internal geometry / hide unused internal geometry - + Show all internal geometry / hide unused internal geometry @@ -1070,7 +1070,7 @@ Select Conflicting Constraints - + Select Conflicting Constraints @@ -1083,12 +1083,12 @@ Select Constraints - + Select Constraints Select the constraints associated to the selected elements - + Select the constraints associated to the selected elements @@ -1102,7 +1102,7 @@ Select Elements associated with constraints - + Select Elements associated with constraints @@ -1115,12 +1115,12 @@ Select Horizontal Axis - + Select Horizontal Axis Select the horizontal axis - + Select the horizontal axis @@ -1133,12 +1133,12 @@ Select Origin - + Select Origin Select the origin point - + Select the origin point @@ -1152,7 +1152,7 @@ Select Redundant Constraints - + Select Redundant Constraints @@ -1165,12 +1165,12 @@ Select Vertical Axis - + Select Vertical Axis Select the vertical axis - + Select the vertical axis @@ -1352,7 +1352,7 @@ - + Wrong selection Verkeerde keuse @@ -1387,7 +1387,7 @@ - + Impossible constraint Onmoontlike beperking @@ -1458,29 +1458,29 @@ Cannot add a fixed x-coordinate constraint on an external geometry! - + Cannot add a fixed x-coordinate constraint on an external geometry! Cannot add a fixed x-coordinate constraint on the root point! - + Cannot add a fixed x-coordinate constraint on the root point! Cannot add a fixed y-coordinate constraint on an external geometry! - + Cannot add a fixed y-coordinate constraint on an external geometry! Cannot add a fixed y-coordinate constraint on the root point! - + Cannot add a fixed y-coordinate constraint on the root point! Select one or more arcs or circles from the sketch. - + Select one or more arcs or circles from the sketch. @@ -1490,88 +1490,88 @@ Do you want to share the same radius for all selected elements? - + Do you want to share the same radius for all selected elements? Select only entities from the sketch. - + Select only entities from the sketch. Select one or two lines from the sketch. Or select two edges and a point. - + Select one or two lines from the sketch. Or select two edges and a point. Parallel lines - + Parallel lines An angle constraint cannot be set for two parallel lines. - + An angle constraint cannot be set for two parallel lines. Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Selected objects are not just geometry from one sketch. - + Selected objects are not just geometry from one sketch. Number of selected objects is not 3 (is %1). - + Number of selected objects is not 3 (is %1). Incompatible geometry is selected! - + Incompatible geometry is selected! Select at least one ellipse and one edge from the sketch. - + Select at least one ellipse and one edge from the sketch. Sketch axes cannot be used in internal alignment constraint - + Sketch axes cannot be used in internal alignment constraint You can not internally constraint an ellipse on other ellipse. Select only one ellipse. - + You can not internally constraint an ellipse on other ellipse. Select only one ellipse. Maximum 2 points are supported. - + Maximum 2 points are supported. Maximum 2 lines are supported. - + Maximum 2 lines are supported. Nothing to constraint - + Nothing to constraint Currently all internal geometry of the ellipse is already exposed. - + Currently all internal geometry of the ellipse is already exposed. @@ -1579,39 +1579,39 @@ Extra elements - + Extra elements More elements than possible for the given ellipse were provided. These were ignored. - + More elements than possible for the given ellipse were provided. These were ignored. You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. - + You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Currently all internal geometry of the arc of ellipse is already exposed. - + Currently all internal geometry of the arc of ellipse is already exposed. More elements than possible for the given arc of ellipse were provided. These were ignored. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Select exactly two vertexes from the sketch. @@ -1716,33 +1716,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. perpendicular constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. perpendicular constraint - + Select some geometry from the sketch. Wrong number of selected objects! perpendicular constraint - + Wrong number of selected objects! Error - + Fout With 3 objects, there must be 2 curves and 1 point. tangent constraint - + With 3 objects, there must be 2 curves and 1 point. @@ -1773,19 +1775,21 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. tangent constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. tangent constraint - + Select some geometry from the sketch. Wrong number of selected objects! tangent constraint - + Wrong number of selected objects! @@ -1898,7 +1902,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Kies presies twee entiteite van die skets. - + Edit sketch Wysig skets @@ -1970,39 +1974,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select at least two edges from the sketch. - + Select at least two edges from the sketch. One selected edge is not connectable - + One selected edge is not connectable Closing a shape formed by exactly two lines makes no sense. - + Closing a shape formed by exactly two lines makes no sense. Select elements from a single sketch. - + Select elements from a single sketch. No constraint selected - + No constraint selected At least one constraint must be selected - + At least one constraint must be selected - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. @@ -2079,19 +2083,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio Constraint_SnellsLaw - + Refractive index ratio Ratio n2/n1: Constraint_SnellsLaw - + Ratio n2/n1: Change radius - + Change radius @@ -2103,12 +2107,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio - + Refractive index ratio Ratio n2/n1: - + Ratio n2/n1: @@ -2149,7 +2153,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unnamed - + Unnamed @@ -2269,11 +2273,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Constraint color - - - - Constrain color - Constrain color + Constraint color @@ -2339,7 +2339,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::SketcherValidation - + No missing coincidences No missing coincidences @@ -2361,21 +2361,87 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c No invalid constraints - + No invalid constraints No invalid constraints found - + No invalid constraints found Invalid constraints - + Invalid constraints Invalid constraints found + Invalid constraints found + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. @@ -2427,47 +2493,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Type: - + Soort: Edge - + Edge Starting Point - + Starting Point End Point - + End Point Center Point - + Center Point Extended Naming - + Extended Naming Auto-switch to Edge - + Auto-switch to Edge <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> - + <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> Elements - + Elements @@ -2475,7 +2541,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Point - + Punt @@ -2483,7 +2549,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - + Lyn @@ -2491,7 +2557,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc - + Boog @@ -2499,19 +2565,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Circle - + Sirkel Ellipse - + Ellipse Elliptical Arc - + Elliptical Arc @@ -2519,7 +2585,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Other - + Other @@ -2539,10 +2605,6 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Grid size: Ruitnetgrootte: - - mm - mm - Grid snap @@ -2655,7 +2717,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher validation - + + Delete constraints to external geom. + + + + Missing coincidences Missing coincidences @@ -2664,22 +2731,48 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Tolerance: Tolerance: + + + Reversed external geometry + + + + + Swap endpoints in constraints + + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + Find Find - - + + Fix Fix - + Invalid constraints - + Invalid constraints @@ -2687,13 +2780,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid sketch - + Invalid sketch The sketch is invalid and cannot be edited. Use the sketch validation tool. - + The sketch is invalid and cannot be edited. +Use the sketch validation tool. @@ -2723,24 +2817,24 @@ Use the sketch validation tool. Over-constrained sketch - + Over-constrained sketch (click to select) - + (click to select) Sketch contains conflicting constraints - + Sketch contains conflicting constraints Sketch contains redundant constraints - + Sketch contains redundant constraints Over-constrained sketch @@ -2813,7 +2907,7 @@ Use the sketch validation tool. Create an arc of ellipse by its center, major radius, endpoints - + Create an arc of ellipse by its center, major radius, endpoints @@ -2831,7 +2925,7 @@ Use the sketch validation tool. Create a ellipse by periapsis, apoapsis, and minor radius - + Create a ellipse by periapsis, apoapsis, and minor radius @@ -2840,7 +2934,7 @@ Use the sketch validation tool. Create an ellipse by center, major radius and point - + Create an ellipse by center, major radius and point @@ -2849,7 +2943,7 @@ Use the sketch validation tool. Create a heptagon by its center and by one corner - + Create a heptagon by its center and by one corner @@ -2858,7 +2952,7 @@ Use the sketch validation tool. Create a hexagon by its center and by one corner - + Create a hexagon by its center and by one corner @@ -2867,7 +2961,7 @@ Use the sketch validation tool. Create an octagon by its center and by one corner - + Create an octagon by its center and by one corner @@ -2876,7 +2970,7 @@ Use the sketch validation tool. Create a pentagon by its center and by one corner - + Create a pentagon by its center and by one corner @@ -2885,7 +2979,7 @@ Use the sketch validation tool. Create a square by its center and by one corner - + Create a square by its center and by one corner @@ -2894,7 +2988,7 @@ Use the sketch validation tool. Create an equilateral triangle by its center and by one corner - + Create an equilateral triangle by its center and by one corner @@ -2966,7 +3060,7 @@ Do you want to detach it from the support? Sketcher tools - + Sketcher tools Sketcher geoms diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.qm index eae925e4a4..5b38e055c1 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts index 8367b1f847..3e832d4e7f 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts @@ -11,12 +11,12 @@ Close Shape - + Uzavřít tvar Produce closed shape by Link end point of element with next elements' starting point - + Vytvoří uzavřený tvar spojením koncového bodu elementu s počátečním bodem následujícího elementu @@ -34,17 +34,17 @@ Create an arc in the sketcher - Create an arc in the sketcher + Vytvoří oblouk v náčrtu Center and end points - Center and end points + Střed a koncové body End points and rim point - End points and rim point + Koncové body a okrajový bod @@ -62,17 +62,17 @@ Create a circle in the sketcher - Create a circle in the sketcher + Vytvoří kružnici v náčrtu Center and rim point - Center and rim point + Střed a okrajový bod 3 rim points - 3 rim points + 3 okrajové body @@ -85,27 +85,27 @@ Create a conic - + Vytvoří kuželosečku Create a conic in the sketch - + Vytvoří kuželosečku v náčrtu Ellipse by center, major radius, point - + Elipsa pomocí středu, hlavní poloosy a bodu Ellipse by Periapsis, apoapsis, minor radius - + Elipsa pomocí perihélia, afélia a vedlejší poloosy Arc of ellipse by center, major radius, endpoints - + Oblouk elipsy pomocí středu, hlavní poloosy a koncových bodů @@ -118,42 +118,42 @@ Create regular polygon - + Vytvoří pravidelný mnohoúhleník Create an regular polygon in the sketcher - + Vytvoří pravidelný mnohoúhelník v náčrtu Triangle - + Trojúhelník Square - + Čtverec Pentagon - + Pětiúhelník Hexagon - + Šestiúhelník Heptagon - + Sedmiúhelník Octagon - + Osmiúhelník @@ -166,12 +166,12 @@ Connect Edges - + Spojí hrany Link end point of element with next elements' starting point - + Spojí koncový bod elementu s počátečním bodem následujícího elementu @@ -318,12 +318,12 @@ Constrain InternalAlignment - + Vyzba vnitřní uspořádání Constrains an element to be aligned with the internal geometry of another element - + Vytvoří vazbu elementu s vnitřní geometrií jiného elementu @@ -377,7 +377,7 @@ Create a perpendicular constraint between two lines - Create a perpendicular constraint between two lines + Vytvoří kolmou vazbu mezi dvěma čarami Create a Perpendicular constraint between two lines @@ -430,12 +430,12 @@ Constrain refraction (Snell's law') - + Vazba refrakce (Snellův zákon) Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - + Vytvoří refrakční (Snellův) zákon jako vazbu mezi koncovými body paprsku a hrany tvořící rozhraní. @@ -453,7 +453,7 @@ Create a symmetry constraint between two points with respect to a line or a third point - Create a symmetry constraint between two points with respect to a line or a third point + Vytvoří symetrikcou vazbu mezi dvěma body vzhledem k čáře nebo třetímu bodu Create an symmetry constraint between two points with respect to a line @@ -506,12 +506,12 @@ Create arc by three points - Create arc by three points + Vytvoř oblouk třemi body Create an arc by its end points and a point along the arc - Create an arc by its end points and a point along the arc + Vytvoří oblouk jeho koncovými body a bodem podél oblouku @@ -524,12 +524,12 @@ Create circle by three points - Create circle by three points + Vytvoř kružnici třemi body Create a circle by 3 perimeter points - Create a circle by 3 perimeter points + Vytvoř kružnici třemi obvodovými body @@ -542,12 +542,12 @@ Create arc by center - Create arc by center + Vytvoř oblouk podle středu Create an arc by its center and by its end points - Create an arc by its center and by its end points + Vytvoří oblouk podle jeho středu a skrz jeho koncové body Create arc @@ -568,12 +568,12 @@ Create an arc of ellipse - + Vytvoří oblouk elipsy Create an arc of ellipse in the sketch - + Vytvoří oblouk elipsy v náčrtu @@ -622,12 +622,12 @@ Create ellipse by 3 points - + Vytvoří elipsu pomocí 3 bodů Create an ellipse by 3 points in the sketch - + Vytvoří elipsu pomocí 3 bodů v náčrtu @@ -640,12 +640,12 @@ Create ellipse by center - + Vytvoří elipsu pomocí středu Create an ellipse by center in the sketch - + Vytvoří elipsu pomocí středu v náčrtu @@ -680,12 +680,12 @@ Create heptagon - + Vytvoří sedmiúhelník Create a heptagon in the sketch - + Vytvoří sedmiúhelník v náčrtu @@ -698,12 +698,12 @@ Create hexagon - + Vytvoří šestiúhelník Create a hexagon in the sketch - + Vytvoří šestiúhelník v náčrtu @@ -734,12 +734,12 @@ Create octagon - + Vytvoří osmiúhelník Create an octagon in the sketch - + Vytvoří osmiúhelník v náčrtu @@ -752,12 +752,12 @@ Create pentagon - + Vytvoří pětiúhelník Create a pentagon in the sketch - + Vytvoří pětiúhelník v náčrtu @@ -793,7 +793,7 @@ Create a polyline in the sketch. 'M' Key cycles behaviour - Create a polyline in the sketch. 'M' Key cycles behaviour + Vytvoří lomenou čáru v náčrtu. Klávesa 'M' mění chování Create a polyline in the sketch @@ -828,12 +828,12 @@ Create slot - Create slot + Vytvoř drážku Create a slot in the sketch - Create a slot in the sketch + Vytvoří drážku v náčertu @@ -846,12 +846,12 @@ Create square - + Vytvoří čtverec Create a square in the sketch - + Vytvoří čtverec v náčrtu @@ -882,12 +882,12 @@ Create equilateral triangle - + Vytvoří rovnostranný trojúhelník Create an equilateral triangle in the sketch - + Vytvoří rovnostranný trojúhelník v náčrtu @@ -905,7 +905,7 @@ Edit the selected sketch - + Upravit vybraný náčrt @@ -973,7 +973,7 @@ Merge sketches - + Sloučit náčrty @@ -983,7 +983,7 @@ Select at least two sketches, please. - + Vyberte prosím alespoň dva náčrty. @@ -1051,12 +1051,12 @@ Show/hide internal geometry - + Zobrazit / skrýt vnitřní geometrii Show all internal geometry / hide unused internal geometry - + Zobrazit veškerou vnitřní geometrii / skrýt nepoužitou vnitřní geometrii @@ -1070,7 +1070,7 @@ Select Conflicting Constraints - + Vybere konfliktní vazby @@ -1083,12 +1083,12 @@ Select Constraints - + Vybrere vazby Select the constraints associated to the selected elements - + Vybere vyzby související s vybranými elementy @@ -1102,7 +1102,7 @@ Select Elements associated with constraints - + Vybere elementy související s vazbami @@ -1115,12 +1115,12 @@ Select Horizontal Axis - + Vybere horizontální osu Select the horizontal axis - + Vybere horizontální osu @@ -1133,12 +1133,12 @@ Select Origin - + Vybere počátek Select the origin point - + Vybere počáteční bod @@ -1152,7 +1152,7 @@ Select Redundant Constraints - + Vybere nadbytečné vazby @@ -1165,12 +1165,12 @@ Select Vertical Axis - + Vybere vertikální osu Select the vertical axis - + Vybere vertikální osu @@ -1352,7 +1352,7 @@ - + Wrong selection Neplatný výběr @@ -1387,7 +1387,7 @@ - + Impossible constraint Nemožné omezení @@ -1458,29 +1458,29 @@ Cannot add a fixed x-coordinate constraint on an external geometry! - + Nelze přidat vazbu souřadnice x na vnější geometrii! Cannot add a fixed x-coordinate constraint on the root point! - + Nelze přidat vazbu souřadnice x na počátek souřadnic! Cannot add a fixed y-coordinate constraint on an external geometry! - + Nelze přidat vazbu souřadnice y na vnější geometrii! Cannot add a fixed y-coordinate constraint on the root point! - + Nelze přidat vazbu souřadnice x na počátek souřadnic! Select one or more arcs or circles from the sketch. - + Vyberte jeden nebo více oblouků nebo kružnic z náčrtu. @@ -1490,88 +1490,88 @@ Do you want to share the same radius for all selected elements? - + Má být poloměr stejný pro všechny vybrané elementy? Select only entities from the sketch. - + Vyberte pouze entity z náčrtu. Select one or two lines from the sketch. Or select two edges and a point. - + Vyberte jednu nebo dvě úsečky z náčrtu. Nebo vyberte dvě hrany a bod. Parallel lines - + Rovnoběžné úsečky An angle constraint cannot be set for two parallel lines. - + Úhlová vazba nemůže být nastavena pro dvě rovnoběžné úsečky. Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Vyberte koncové body úsečky představující paprsek a hranu reprezentující rozhraní. První vybraný bod odpovídá intexu n1, druhý indexu n2, zadává se hodnota poměru n2/n1. Selected objects are not just geometry from one sketch. - + Vybrané objekty nejsou geometrií jednoho náčrtu. Number of selected objects is not 3 (is %1). - + Počet vybraných objektu není 3 (vybráno je %1). Incompatible geometry is selected! - + Je vybrána nekompatibilní geometrie! Select at least one ellipse and one edge from the sketch. - + Vyberte alespoň jednu elipsu a jednu hranu z náčrtu. Sketch axes cannot be used in internal alignment constraint - + Osy náčrtu nelze použít ve vazbách vnitřního uspořádání You can not internally constraint an ellipse on other ellipse. Select only one ellipse. - + Nemůžete vnitřně vazbit jednu elipsu k druhé. Vyberte pouze jednu elipsu. Maximum 2 points are supported. - + Jsou podporovány maximálně 2 body. Maximum 2 lines are supported. - + Jsou podporovány maximálně dvě čáry. Nothing to constraint - + Není co vazbit Currently all internal geometry of the ellipse is already exposed. - + Momentálně je veškerá vnitřní geometrie elipsy odhalená. @@ -1579,39 +1579,39 @@ Extra elements - + Dodatečné elementy More elements than possible for the given ellipse were provided. These were ignored. - + Bylo poskytnuto více elementů, než bylo pro danou elipsu možné. Tyto byly ignorovány. You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. - + Nemůžete vnitřně vazbit jeden oblouk elipsy k druhému. Vyberte pouze jeden oblouk elipsy. You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Nemůžete vnitřně vazbit elipsu k oblouku elipsy. Vyberte pouze elipsu nebo oblouk elipsy. Currently all internal geometry of the arc of ellipse is already exposed. - + Momentálně je veškerá vnitřní geometrie oblouku elipsy odhalená. More elements than possible for the given arc of ellipse were provided. These were ignored. - + Bylo poskytnuto více elementů, než bylo pro daný oblouk elipsy možné. Tyto byly ignorovány. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Momentálně je vnitřní geometrie podporována jen pro elipsu nebo oblouk elipsy. Naposledy vybraným elementem musí být elipsa nebo oblouk elipsy. Select exactly two vertexes from the sketch. @@ -1621,7 +1621,7 @@ Select two or more vertexes from the sketch. - Select two or more vertexes from the sketch. + Vyberte dva nebo více vrcholů z náčrtu. @@ -1716,33 +1716,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. perpendicular constraint - + Tuto vaztu je možno použít více způsoby. + +Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; dvě křivky a bod. Select some geometry from the sketch. perpendicular constraint - + Vyberte geometrii z náčrtu. Wrong number of selected objects! perpendicular constraint - + Nesprávný počet vybraných objektů! Error - + Chyba With 3 objects, there must be 2 curves and 1 point. tangent constraint - + Mezi třemi objekty musí být 2 křivky a 1 bod. @@ -1773,19 +1775,21 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. tangent constraint - + Tuto vaztu je možno použít více způsoby. + +Přijatelné kombinace: dvě křivky; koncový bod a křivka; dva koncové body; dvě křivky a bod. Select some geometry from the sketch. tangent constraint - + Vyberte geometrii z náčrtu. Wrong number of selected objects! tangent constraint - + Nesprávný počet vybraných objektů! @@ -1847,7 +1851,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. - Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. + Vyberte dva body a čáru symetrie, dva body a bod symetrie nebo čáru a bod symetrie z náčrtu. @@ -1898,7 +1902,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Vyberte právě dvě entity ze skici. - + Edit sketch Upravit skicu @@ -1970,39 +1974,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select at least two edges from the sketch. - + Vyberte alespoň dvě hrany z náčrtu. One selected edge is not connectable - + Jedna vybraná hrana není připojitelná Closing a shape formed by exactly two lines makes no sense. - + Uzavření tvaru složeného právě ze dvou úseček nemá smysl. Select elements from a single sketch. - + Vyberte elementy z jednoho náčrtu. No constraint selected - + Nebyla vybrána vazba At least one constraint must be selected - + Musí být vybrána alespoň jedna vazba - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Momentálně je vnitřní geometrie podporována jen pro elipsu nebo oblouk elipsy. Naposledy vybraným elementem musí být elipsa nebo oblouk elipsy. @@ -2060,7 +2064,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert angle - Insert angle + Vložit úhel @@ -2072,26 +2076,26 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert radius - Insert radius + Vložit rádius Refractive index ratio Constraint_SnellsLaw - + Index lomu Ratio n2/n1: Constraint_SnellsLaw - + Poměr n2/n1: Change radius - + Změna poloměru @@ -2103,18 +2107,18 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio - + Index lomu Ratio n2/n1: - + Poměr n2/n1: Insert length - Insert length + Vložit délku @@ -2149,7 +2153,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unnamed - + Nepojmenovaný @@ -2205,13 +2209,13 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Default edge color - Default edge color + Výchozí barva hran The color of edges being edited - The color of edges being edited + Barva hran při editaci @@ -2222,7 +2226,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c The color of vertices being edited - The color of vertices being edited + Barva vrcholů při editace @@ -2242,7 +2246,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c The color of construction geometry in edit mode - The color of construction geometry in edit mode + Barva konstrukční geometrie v editačním režimu @@ -2252,33 +2256,29 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c The color of external geometry in edit mode - The color of external geometry in edit mode + Barva vnější geometrie v editačním režimu Fully constrained geometry - Fully constrained geometry + Plně zavazbená geometrie The color of fully constrained geometry in edit mode - The color of fully constrained geometry in edit mode + Barva plně zavazbené geometrie v editačním módu Constraint color - - - - Constrain color - Barva vazby + Barva vazeb Datum color - Barva datumu + Barva kót @@ -2308,12 +2308,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Default line width - Default line width + Výchozí tloušťka čáry Cursor text color - Cursor text color + Barva textu kurzoru @@ -2328,54 +2328,120 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Grid line pattern - Grid line pattern + Typ čáry mřížky Ask for value after creating a distance constraint - Ask for value after creating a distance constraint + Zeptat se na hodnotu při vytvoření délkové vazby SketcherGui::SketcherValidation - + No missing coincidences - No missing coincidences + Shody nechybí No missing coincidences found - No missing coincidences found + Chybějící shody nebyly nalezeny Missing coincidences - Missing coincidences + Chybějící shody %1 missing coincidences found - %1 missing coincidences found + Počet chybějících shod: %1 No invalid constraints - + Neplatné vazby nejsou No invalid constraints found - + Neplatné vazby nenalezeny Invalid constraints - + Neplatné vazby Invalid constraints found + Byly nalezeny neplatné vazby + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. @@ -2427,47 +2493,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Type: - + Typ: Edge - + Hrana Starting Point - + Výchozí bod End Point - + Koncový bod Center Point - + Středový bod Extended Naming - + Rozšířené názvy Auto-switch to Edge - + Automaticky přepnout na hranu <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> - + <html><head/><body><p>&quot;Ctrl&quot;: výcenásobný výběr</p><p>&quot;Z&quot;: přepnout na další platný typ</p></body></html> Elements - + Elementy @@ -2475,7 +2541,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Point - + Bod @@ -2483,7 +2549,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - + Čára @@ -2491,7 +2557,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc - + oblouk @@ -2499,19 +2565,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Circle - + Kruh Ellipse - + Elipsa Elliptical Arc - + Eliptický oblouk @@ -2519,7 +2585,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Other - + Jiný @@ -2539,10 +2605,6 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Grid size: Velikost mřížky: - - mm - mm - Grid snap @@ -2655,31 +2717,62 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Kontrola náčrtku - + + Delete constraints to external geom. + + + + Missing coincidences - Missing coincidences + Chybějící shody Tolerance: Tolerance: + + + Reversed external geometry + + + + + Swap endpoints in constraints + + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + Find Hledat - - + + Fix Opravit - + Invalid constraints - + Neplatné vazby @@ -2687,13 +2780,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid sketch - + Neplatný náčrt The sketch is invalid and cannot be edited. Use the sketch validation tool. - + Náčrt je neplatný a nelze ho upravovat. +Použijte nástroj Kontrola náčrtu. @@ -2723,24 +2817,24 @@ Use the sketch validation tool. Over-constrained sketch - + Převazbený náčrt (click to select) - + (klikněte pro vybrání) Sketch contains conflicting constraints - + Náčrt obsahuje konfliktní vazby Sketch contains redundant constraints - + Náčrt obsahuje nadbytečné vazby Over-constrained sketch @@ -2786,7 +2880,7 @@ Use the sketch validation tool. Create an arc by its end points and a point along the arc - Create an arc by its end points and a point along the arc + Vytvoří oblouk jeho koncovými body a bodem podél oblouku @@ -2795,7 +2889,7 @@ Use the sketch validation tool. Create a circle by 3 rim points - Create a circle by 3 rim points + Vytvoří kružnici třemi okrajovými body @@ -2804,7 +2898,7 @@ Use the sketch validation tool. Create an arc by its center and by its end points - Create an arc by its center and by its end points + Vytvoří oblouk podle jeho středu a skrz jeho koncové body @@ -2813,7 +2907,7 @@ Use the sketch validation tool. Create an arc of ellipse by its center, major radius, endpoints - + Vytvoří oblouk elipsy pomocí středu, hlavní poloosy a koncových bodů @@ -2822,7 +2916,7 @@ Use the sketch validation tool. Create a circle by its center and by a rim point - Create a circle by its center and by a rim point + Vytvoří kružnici podle jeho středu a skrz okrajový bod @@ -2831,7 +2925,7 @@ Use the sketch validation tool. Create a ellipse by periapsis, apoapsis, and minor radius - + Vytvoří elipsu pomocí perihélia, afélia a vedlejší poloosy @@ -2840,7 +2934,7 @@ Use the sketch validation tool. Create an ellipse by center, major radius and point - + Vytvoří elipsu pomocí středu, hlavní poloosy a bodu @@ -2849,7 +2943,7 @@ Use the sketch validation tool. Create a heptagon by its center and by one corner - + Vytvoří sedmiúhelník pomocí jeho středu a vrcholu @@ -2858,7 +2952,7 @@ Use the sketch validation tool. Create a hexagon by its center and by one corner - + Vytvoří šestiúhelník pomocí jeho středu a vrcholu @@ -2867,7 +2961,7 @@ Use the sketch validation tool. Create an octagon by its center and by one corner - + Vytvoří osmiúhelník pomocí jeho středu a vrcholu @@ -2876,7 +2970,7 @@ Use the sketch validation tool. Create a pentagon by its center and by one corner - + Vytvoří pětiúhelník pomocí jeho středu a vrcholu @@ -2885,7 +2979,7 @@ Use the sketch validation tool. Create a square by its center and by one corner - + Vytvoří čtverec pomocí jeho středu a vrcholu @@ -2894,7 +2988,7 @@ Use the sketch validation tool. Create an equilateral triangle by its center and by one corner - + Vytvoří pravidelný trojúhelník pomocí jeho středu a vrcholu @@ -2966,7 +3060,7 @@ Přeješ si odstranit podporu průčelí? Sketcher tools - + Nástroje náčrtu Sketcher geoms diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm index 746ecb82ad..e0b5893363 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts index 31f951092b..63f9bf4ff4 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts @@ -1,6 +1,6 @@ - + CmdSketcherCloseShape @@ -11,12 +11,12 @@ Close Shape - + Form schließen Produce closed shape by Link end point of element with next elements' starting point - + Erzeugt eine geschlossene Form durch Verbinden des Element-End-Punktes mit dem Startpunkt des nächsten Elementes @@ -34,17 +34,17 @@ Create an arc in the sketcher - + Einen Bogen in der Skizze erstellen Center and end points - + Mittel- und Endpunkte End points and rim point - + Endpunkte und Punkt auf Kreisbogen @@ -62,17 +62,17 @@ Create a circle in the sketcher - + Einen Kreis in der Skizze erstellen Center and rim point - + Mittelpunkt und Punkt auf Kreisbogen 3 rim points - + Drei Punkte auf Kreisbogen @@ -85,27 +85,27 @@ Create a conic - + Erstellen eines Kegelschnitts Create a conic in the sketch - + Ein Kegelschnitt in der Skizze erstellen Ellipse by center, major radius, point - + Ellipse durch Angabe von Zentrum, großem Radius und Punkt Ellipse by Periapsis, apoapsis, minor radius - + Ellipse durch Angabe von Periapsis, Apoapsis, kleinerem Radius Arc of ellipse by center, major radius, endpoints - + Ellipsen-Bogen durch Angabe von Zentrum, großem Radius, Endpunkte @@ -118,42 +118,42 @@ Create regular polygon - + Regelmäßiges Polygon erstellen Create an regular polygon in the sketcher - + Erstellen Sie ein regelmäßiges Polygon in der Skizze Triangle - + Dreieck Square - + Quadrat Pentagon - + Fünfeck Hexagon - + Sechseck Heptagon - + Siebeneck Octagon - + Achteck @@ -166,12 +166,12 @@ Connect Edges - + verbundene Kanten Link end point of element with next elements' starting point - + Den Endpunkt des Elementes mit dem Startpunkt des nächsten Elementes verbinden @@ -318,12 +318,12 @@ Constrain InternalAlignment - + Interne Ausrichtung einschränken Constrains an element to be aligned with the internal geometry of another element - + Schränkt die Ausrichtung eines Elements bezüglich der internen geometrz eines anderen Elements ein @@ -377,7 +377,7 @@ Create a perpendicular constraint between two lines - + Eine Orthogonalitätsbeschränkung zwischen zwei Linien erstellen Create a Perpendicular constraint between two lines @@ -430,12 +430,12 @@ Constrain refraction (Snell's law') - + Beschränkung: Lichtbrechung (Snellius-Gesetz) Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - + Erstellen Sie eine Lichtbrechung (Snellius-Gesetz) als Einschränkung zwischen zwei Endpunkten der Strahlen und einer Kante als Schnittstelle. @@ -453,7 +453,7 @@ Create a symmetry constraint between two points with respect to a line or a third point - + Eine Symmetriebeschränkung zwischen zwei Punkten in Bezug auf eine Linie oder einen dritten Punkt erstellen Create an symmetry constraint between two points with respect to a line @@ -506,12 +506,12 @@ Create arc by three points - + Bogen aus drei Punkten erstellen Create an arc by its end points and a point along the arc - + Erstelle einen Bogen mit Endpunkten und einem Punkt auf Bogen @@ -524,12 +524,12 @@ Create circle by three points - + Kreis aus drei Punkten erstellen Create a circle by 3 perimeter points - + Kreis erstellen aus drei Punkten auf dem Kreisbogen @@ -542,12 +542,12 @@ Create arc by center - + Bogen aus Mittelpunkt erstellen Create an arc by its center and by its end points - + Erstelle einen Bogen aus Mittel- und Endpunkten Create arc @@ -568,12 +568,12 @@ Create an arc of ellipse - + Erstellen eines Ellipsen-Bogens Create an arc of ellipse in the sketch - + Erstellen eines Ellipsen-Bogens in der Skizze @@ -622,12 +622,12 @@ Create ellipse by 3 points - + Erstellen einer Ellipse durch 3 Punkte Create an ellipse by 3 points in the sketch - + Erstellen einer Ellipse durch 3 Punkte in der Skizze @@ -640,12 +640,12 @@ Create ellipse by center - + Erstellen einer Ellipse durch Angabe des Zentrums Create an ellipse by center in the sketch - + Erstellen einer Ellipse durch Angabe des Zentrums in der Skizze @@ -658,7 +658,7 @@ Create fillet - Rundung erstellen + Abrundung erstellen Create a fillet between two lines or at a coincidental point @@ -680,12 +680,12 @@ Create heptagon - + Siebeneck erstellen Create a heptagon in the sketch - + Siebeneck in der Skizze erstellen @@ -698,12 +698,12 @@ Create hexagon - + Sechseck erstellen Create a hexagon in the sketch - + Sechseck in der Skizze erstellen @@ -734,12 +734,12 @@ Create octagon - + Achteck erstellen Create an octagon in the sketch - + Achteck in der Skizze erstellen @@ -752,12 +752,12 @@ Create pentagon - + Fünfeck erstellen Create a pentagon in the sketch - + Fünfeck in der Skizze erstellen @@ -793,7 +793,7 @@ Create a polyline in the sketch. 'M' Key cycles behaviour - + Einen Linienzug in der Skizze erstellen. Taste 'M' wechselt Verhalten durch Create a polyline in the sketch @@ -828,12 +828,12 @@ Create slot - + Nut erstellen Create a slot in the sketch - + Nut in der Skizze erstellen @@ -846,12 +846,12 @@ Create square - + Quadrat erstellen Create a square in the sketch - + Quadrat in der Skizze erstellen @@ -882,12 +882,12 @@ Create equilateral triangle - + Gleichseitiges Dreieck erstellen Create an equilateral triangle in the sketch - + Erstellen Sie ein gleichseitiges Dreieck in der Skizze @@ -905,7 +905,7 @@ Edit the selected sketch - + ausgewählte Skizze bearbeiten @@ -973,7 +973,7 @@ Merge sketches - + Skizzen zusammenführen @@ -983,7 +983,7 @@ Select at least two sketches, please. - + Bitte wählen Sie mindestens zwei Skizzen. @@ -1033,12 +1033,12 @@ Reorient sketch... - + Skizze neu ausrichten... Reorient the selected sketch - + Die ausgewählte Skizze neu ausrichten @@ -1051,12 +1051,12 @@ Show/hide internal geometry - + Anzeigen/Ausblenden der internen Geometrie Show all internal geometry / hide unused internal geometry - + Anzeige aller internen Geometrie / Ausblenden aller unbenutzten internen Geometrie @@ -1070,7 +1070,7 @@ Select Conflicting Constraints - + Wählen Sie widersprüchliche Einschränkungen aus @@ -1083,12 +1083,12 @@ Select Constraints - + Wählen Sie Einschränkungen aus Select the constraints associated to the selected elements - + Wählen Sie die Einschränkungen der ausgewählten Elemente aus @@ -1102,7 +1102,7 @@ Select Elements associated with constraints - + Wählen Sie Elemente mit Einschränkungen @@ -1115,12 +1115,12 @@ Select Horizontal Axis - + horizontale Achse auswählen Select the horizontal axis - + Wählen Sie die horizontale Achse aus @@ -1133,12 +1133,12 @@ Select Origin - + Ursprung auswählen Select the origin point - + Wählen Sie den Ursprung @@ -1152,7 +1152,7 @@ Select Redundant Constraints - + Wählen Sie redundante Einschränkungen aus @@ -1165,12 +1165,12 @@ Select Vertical Axis - + vertikale Achse auswählen Select the vertical axis - + Wählen Sie die vertikale Achse aus @@ -1201,7 +1201,7 @@ Trim edge - Trimmen + Kante zuschneiden @@ -1223,12 +1223,12 @@ Validate sketch... - + Skizze überprüfen... Validate sketch - + Skizze überprüfen @@ -1238,7 +1238,7 @@ Select one sketch, please. - + Bitte wählen Sie eine Skizze. @@ -1352,7 +1352,7 @@ - + Wrong selection Falsche Auswahl @@ -1387,7 +1387,7 @@ - + Impossible constraint Nicht erfüllbare Bedingung @@ -1458,29 +1458,29 @@ Cannot add a fixed x-coordinate constraint on an external geometry! - + Eine feste x-Einschränkung für eine externe Geometrie kann nicht hinzugefügt werden! Cannot add a fixed x-coordinate constraint on the root point! - + Eine feste x-Einschränkung auf den Ursprung kann nicht hinzugefügt werden! Cannot add a fixed y-coordinate constraint on an external geometry! - + Eine feste y-Einschränkung für eine externe Geometrie kann nicht hinzugefügt werden! Cannot add a fixed y-coordinate constraint on the root point! - + Eine feste y-Einschränkung auf den Ursprung kann nicht hinzugefügt werden! Select one or more arcs or circles from the sketch. - + Wählen Sie eine oder mehrere Bögen oder Kreise aus der Skizze. @@ -1490,88 +1490,88 @@ Do you want to share the same radius for all selected elements? - + Möchten Sie den gleichen Radius allen ausgewählten Elemente zuweisen? Select only entities from the sketch. - + Wählen Sie nur Objekte aus der Skizze. Select one or two lines from the sketch. Or select two edges and a point. - + Wählen Sie eine oder zwei Linien aus der Skizze. Oder wählen Sie zwei Kanten und einen Punkt. Parallel lines - + Parallele Linien An angle constraint cannot be set for two parallel lines. - + Eine Winkel-Einschränkung kann für zwei parallele Linien nicht festgelegt werden. Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Wählen Sie zwei Endpunkte von Linien aus, die als Strahlen dienen sollen, und eine Kante, die eine Grenze darstellt. Der erste gewählte Punkt entspricht Index n1, zweitens - zu n2 und der Bezugs-Wert legt das Verhältnis n2/n1 fest. Selected objects are not just geometry from one sketch. - + Ausgewählte Objekte sind nicht nur Geometrie aus einer einzigen Skizze. Number of selected objects is not 3 (is %1). - + Die Anzahl der ausgewählten Objekte ist nicht 3 (ist %1). Incompatible geometry is selected! - + Inkompatible Geometrie wurde ausgewählt! Select at least one ellipse and one edge from the sketch. - + Wählen Sie mindestens eine Ellipse und eine Kante aus der Skizze. Sketch axes cannot be used in internal alignment constraint - + Skizzen-Achsen können nicht in interner Ausrichtungs-Einschränkung eingesetzt werden You can not internally constraint an ellipse on other ellipse. Select only one ellipse. - + Sie können nicht intern eine Ellipse auf andere Ellipse einschränken. Wählen Sie nur eine Ellipse. Maximum 2 points are supported. - + Maximal 2 Punkte werden unterstützt. Maximum 2 lines are supported. - + Maximal 2 Punkte werden unterstützt. Nothing to constraint - + Keine Einschränkung benutzbar Currently all internal geometry of the ellipse is already exposed. - + Alle Innengeometrie der Ellipse ist derzeit bereits benutzt. @@ -1579,39 +1579,39 @@ Extra elements - + Zusätzliche Elemente More elements than possible for the given ellipse were provided. These were ignored. - + Mehr Elemente als möglich wurden für die angegebene Ellipse zur Verfügung gestellt. Diese wurden ignoriert. You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. - + Sie können nicht intern einen Bogen einer Ellipse auf einen anderen Bogen einer Ellipse einschränken. Wählen Sie nur einen Bogen einer Ellipse. You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Sie können nicht intern eine Ellipse auf einen anderen Bogen einer Ellipse einschränken. Wählen Sie nur eine Ellipse oder einen Bogen einer Ellipse. Currently all internal geometry of the arc of ellipse is already exposed. - + Die ganze interne Geometrie des elliptischen Bogens ist derzeit bereits freigelegt. More elements than possible for the given arc of ellipse were provided. These were ignored. - + Mehr Elemente als möglich wurden für den angegebenen elliptischen Bogen zur Verfügung gestellt. Diese wurden ignoriert. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Interne Geometrie wird derzeit nur für Ellipsen und elliptische Bögen unterstützt. Das ausgewählte Element muss eine Ellipse oder ein elliptischer Bogen sein. Select exactly two vertexes from the sketch. @@ -1621,7 +1621,7 @@ Select two or more vertexes from the sketch. - + Wählen Sie zwei oder mehr Scheitelpunkte von der Skizze. @@ -1716,39 +1716,41 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. perpendicular constraint - + Es gibt mehrere Möglichkeiten diese Beschränkung anzuwenden. + +Erlaubte Kombinationen: zwei Kurven; einen Endpunkt und eine Kurve; zwei Endpunkte; zwei Kurven und einen Punkt. Select some geometry from the sketch. perpendicular constraint - + Geometrie aus der Skizze auswählen. Wrong number of selected objects! perpendicular constraint - + Falsche Anzahl von ausgewählten Objekten! Error - + Fehlermeldungen With 3 objects, there must be 2 curves and 1 point. tangent constraint - + Bei 3 Objekten müssen diese aus 2 Kurven und 1 Punkt bestehen. Cannot add a perpendicularity constraint at an unconnected point! - Cannot add a perpendicularity constraint at an unconnected point! + Eine Rechtwinkligkeitsbedingung kann nicht zu einem unverbundenen Punkt hinzugefügt werden! The selected points should be end points of arcs and lines. @@ -1773,25 +1775,27 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. tangent constraint - + Es gibt mehrere Möglichkeiten diese Beschränkung anzuwenden. + +Erlaubte Kombinationen: zwei Kurven; einen Endpunkt und eine Kurve; zwei Endpunkte; zwei Kurven und einen Punkt. Select some geometry from the sketch. tangent constraint - + Geometrie aus der Skizze auswählen. Wrong number of selected objects! tangent constraint - + Falsche Anzahl von ausgewählten Objekten! Cannot add a tangency constraint at an unconnected point! - Cannot add a tangency constraint at an unconnected point! + Eine Tangentialrandbedingung kann nicht zu einem unverbundenen Punkt hinzugefügt werden! Select exactly one arc or circle from the sketch. @@ -1847,7 +1851,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. - + Wählen Sie zwei Punkte und eine Symmetrielinie, zwei Punkte und einen Symmetriepunkt oder eine Linie und einen Symmetriepunkt von der Skizze. @@ -1898,7 +1902,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Wählen Sie genau zwei Elemente aus der Skizze aus. - + Edit sketch Skizze bearbeiten @@ -1962,7 +1966,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Display - + Anzeige @@ -1970,39 +1974,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select at least two edges from the sketch. - + Wählen Sie mindestens zwei Kanten aus der Skizze. One selected edge is not connectable - + Eine ausgewählte Kante ist nicht anschließbar Closing a shape formed by exactly two lines makes no sense. - + Das schließen einer Form, bestehend aus exakt zwei Linien, ergibt keinen Sinn. Select elements from a single sketch. - + Wähle Elemente aus einer einzigen Skizze. No constraint selected - + Keine Einschränkung ausgewählt At least one constraint must be selected - + Mindestens eine Einschränkung muss ausgewählt sein - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Interne Geometrie wird derzeit nur für Ellipsen und elliptische Bögen unterstützt. Das ausgewählte Element muss eine Ellipse oder ein elliptischer Bogen sein. @@ -2041,17 +2045,17 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Change value - + Wert ändern Rename - + Umbenennen Delete - + Löschen @@ -2060,67 +2064,67 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert angle - + Winkel einfügen Angle: - + Winkel: Insert radius - + Radius einfügen Refractive index ratio Constraint_SnellsLaw - + Brechungsindex-Verhältnis Ratio n2/n1: Constraint_SnellsLaw - + Verhältnis n2/n1: Change radius - + Radius ändern Radius: - + Radius: Refractive index ratio - + Brechungsindex-Verhältnis Ratio n2/n1: - + Verhältnis n2/n1: Insert length - + Länge einfügen Length: - + Länge: @@ -2128,7 +2132,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Delete - + Löschen @@ -2149,7 +2153,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unnamed - + Unbenannt @@ -2200,49 +2204,49 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher colors - + Skizzenfarben Default edge color - + Standard-Kantenfarbe The color of edges being edited - + Die Farbe der bearbeiteten Kanten Default vertex color - + Standard-Scheitelpunktfarbe The color of vertices being edited - + Die Farbe der bearbeiteten Scheitelpunkte Edit edge color - + Kantenfarbe bearbeiten Edit vertex color - + Scheitelpunktfarbe bearbeiten Construction geometry - + Konstruktionsgeometrie The color of construction geometry in edit mode - + Farbe von Hilfsgeometrie im Bearbeitungsmodus @@ -2252,41 +2256,41 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c The color of external geometry in edit mode - + Farbe von externer Geometrie im Bearbeitungsmodus Fully constrained geometry - + Vollständig bestimmte Geometrie The color of fully constrained geometry in edit mode - + Farbe einer vollständig festgelegten Geometrie im Bearbeitungsmodus Constraint color - + Farbe für Beschränkungen Datum color - + Farbe für Bezüge Datum text size - + Textgröße für Bezüge The default line thickness for new shapes - + Der Standard-Liniendicke für neue Formen @@ -2294,84 +2298,150 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c px - + px Default vertex size - + Standard-Scheitelpunktgröße Default line width - + Standard-Linienbreite Cursor text color - + Cursor-Textfarbe Sketch editing - + Skizzenbearbeitung Font size - + Schriftgröße Grid line pattern - + Linienmuster für Gitter Ask for value after creating a distance constraint - + Nach Wert fragen nachdem eine Abstandsbeschränkung erstellt wurde SketcherGui::SketcherValidation - + No missing coincidences - + Keine zusammenfallenden Punkte No missing coincidences found - + Keine zusammenfallenden Punkte gefunden Missing coincidences - + Zusammenfallende Punkte %1 missing coincidences found - + %1 zusammenfallende Punkte gefunden No invalid constraints - + Keine ungültigen Einschränkungen No invalid constraints found - + Keine ungültigen Einschränkungen gefunden Invalid constraints - + Ungültige Beschränkung Invalid constraints found + Ungültige Einschränkungen gefunden + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. @@ -2423,47 +2493,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Type: - + Typ: Edge - + Kante Starting Point - + Startpunkt End Point - + Endpunkt Center Point - + Mittelpunkt Extended Naming - + Erweiterte Namensgebung Auto-switch to Edge - + Automatisch zu Kante umschalten <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> - + <html><head/> <body><p>&quot;Ctrl&quot;: Mehrfachauswahl</p> <p>&quot;Z&quot;: Wechseln zum nächsten gültigen Typ</p></body></html> Elements - + Elemente @@ -2471,7 +2541,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Point - + Punkt @@ -2479,7 +2549,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - + Linie @@ -2487,7 +2557,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc - + Kreisbogen @@ -2495,19 +2565,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Circle - + Kreis Ellipse - + Ellipse Elliptical Arc - + Elliptischer Bogen @@ -2515,7 +2585,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Other - + Andere @@ -2528,7 +2598,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Show grid - + Gitter anzeigen @@ -2644,34 +2714,65 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher validation - + Skizzenprüfung - - Missing coincidences - - - - - Tolerance: + + Delete constraints to external geom. + Missing coincidences + Zusammenfallende Punkte + + + + Tolerance: + Toleranz: + + + + Reversed external geometry + + + + + Swap endpoints in constraints + + + + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + Find - + Suchen - - + + Fix - + Reparieren - + Invalid constraints - + Ungültige Beschränkung @@ -2679,13 +2780,13 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid sketch - + Ungültige Skizze The sketch is invalid and cannot be edited. Use the sketch validation tool. - + Die Skizze ist ungültig und kann nicht bearbeitet werden. Verwenden Sie das Skizzenvalidierungswerkzeug. @@ -2715,24 +2816,24 @@ Use the sketch validation tool. Over-constrained sketch - + Überbestimmte Skizze (click to select) - + (anklicken zum Auswählen) Sketch contains conflicting constraints - + Skizze enthält widersprüchliche Einschränkungen Sketch contains redundant constraints - + Skizze enthält redundante Einschränkungen Over-constrained sketch @@ -2778,7 +2879,7 @@ Use the sketch validation tool. Create an arc by its end points and a point along the arc - + Erstelle einen Bogen mit Endpunkten und einem Punkt auf Bogen @@ -2787,7 +2888,7 @@ Use the sketch validation tool. Create a circle by 3 rim points - + Erstelle einen Kreis aus drei Punkten auf dem Kreisbogen @@ -2796,7 +2897,7 @@ Use the sketch validation tool. Create an arc by its center and by its end points - + Erstelle einen Bogen aus Mittel- und Endpunkten @@ -2805,7 +2906,7 @@ Use the sketch validation tool. Create an arc of ellipse by its center, major radius, endpoints - + Elliptischen Bogen aus Mittelpunkt, großer Halbachse und Endpunkten erzeugen @@ -2814,7 +2915,7 @@ Use the sketch validation tool. Create a circle by its center and by a rim point - + Erstelle einen Kreis aus Mittel- und einem Randpunkt @@ -2823,7 +2924,7 @@ Use the sketch validation tool. Create a ellipse by periapsis, apoapsis, and minor radius - + Ellipse aus Periapsis, Apoapsis und kleiner Halbachse erzeugen @@ -2832,7 +2933,7 @@ Use the sketch validation tool. Create an ellipse by center, major radius and point - + Ellipse aus Mittelpunkt, großer Halbachse und weiterem Punkt erzeugen @@ -2841,7 +2942,7 @@ Use the sketch validation tool. Create a heptagon by its center and by one corner - + Siebeneck aus Mittelpunkt und einer Ecke erzeugen @@ -2850,7 +2951,7 @@ Use the sketch validation tool. Create a hexagon by its center and by one corner - + Sechseck aus Mittelpunkt und einer Ecke erzeugen @@ -2859,7 +2960,7 @@ Use the sketch validation tool. Create an octagon by its center and by one corner - + Achteck aus Mittelpunkt und einer Ecke erzeugen @@ -2868,7 +2969,7 @@ Use the sketch validation tool. Create a pentagon by its center and by one corner - + Fünfeck aus Mittelpunkt und einer Ecke erzeugen @@ -2877,7 +2978,7 @@ Use the sketch validation tool. Create a square by its center and by one corner - + Quadrat aus Mittelpunkt und einer Ecke erzeugen @@ -2886,7 +2987,7 @@ Use the sketch validation tool. Create an equilateral triangle by its center and by one corner - + Gleichseitiges Dreieck aus Mittelpunkt und einer Ecke erzeugen @@ -2894,13 +2995,14 @@ Use the sketch validation tool. Sketch has support - + Skizze ist einer Fläche zugeordnet Sketch with a support face cannot be reoriented. Do you want to detach it from the support? - + Skizzen, die einer Fläche zugeordnet sind können nicht umorientiert werden. +Soll die Skizze von der Fläche entfernt werden? @@ -2957,7 +3059,7 @@ Do you want to detach it from the support? Sketcher tools - + Skizzier Werkzeuge Sketcher geoms diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm index c1b56f5cb0..ebd8ec00b1 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts index e8654d1d2b..51d85facac 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts @@ -11,12 +11,12 @@ Close Shape - + Cerrar forma Produce closed shape by Link end point of element with next elements' starting point - + Crear una geometría cerrada mediante la unión del último punto de un elemento con el primer punto del siguiente @@ -85,27 +85,27 @@ Create a conic - + Crear una curva cónica Create a conic in the sketch - + Crear una curva cónica en el boceto Ellipse by center, major radius, point - + Elipse mediante centro, radio mayor y punto Ellipse by Periapsis, apoapsis, minor radius - + Elipse mediante periastro, apoastro y radio menor Arc of ellipse by center, major radius, endpoints - + Arco de elipse mediante centro, radio mayor y extremos @@ -118,42 +118,42 @@ Create regular polygon - + Crear polígono regular Create an regular polygon in the sketcher - + Crear un polígono regular en el boceto Triangle - + Triángulo Square - + Cuadrado Pentagon - + Pentágono Hexagon - + Hexágono Heptagon - + Heptágono Octagon - + Octágono @@ -166,12 +166,12 @@ Connect Edges - + Unir bordes Link end point of element with next elements' starting point - + Unir el punto final de un elemento con el inicial de otro @@ -300,7 +300,7 @@ Constrain horizontally - Restricción de horizontalidad + Restringir horizontalmente @@ -318,12 +318,12 @@ Constrain InternalAlignment - + Restringir AlineamientoInterno Constrains an element to be aligned with the internal geometry of another element - + Restringe un elemento para alinearse con la geometría interna de otro elemento @@ -430,12 +430,12 @@ Constrain refraction (Snell's law') - + Restricción de refracción (Ley de Snell) Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - + Crea una restricción de ley de refracción (ley de Snell) entre dos extremos de los rayos y una arista como interfaz. @@ -568,12 +568,12 @@ Create an arc of ellipse - + Crear un arco de elipse Create an arc of ellipse in the sketch - + Crear un arco de elipse en el boceto @@ -622,12 +622,12 @@ Create ellipse by 3 points - + Crear elipse mediante 3 puntos Create an ellipse by 3 points in the sketch - + Crear elipse en el boceto mediante 3 puntos @@ -640,12 +640,12 @@ Create ellipse by center - + Crear elipse mediante centro Create an ellipse by center in the sketch - + Crear una elipse en el boceto mediante centro @@ -680,12 +680,12 @@ Create heptagon - + Crear heptágono Create a heptagon in the sketch - + Crear un heptágono en el boceto @@ -698,12 +698,12 @@ Create hexagon - + Crear hexágono Create a hexagon in the sketch - + Crear un hexágono en el boceto @@ -734,12 +734,12 @@ Create octagon - + Crear octágono Create an octagon in the sketch - + Crear un octágono en el boceto @@ -752,12 +752,12 @@ Create pentagon - + Crear Pentágono Create a pentagon in the sketch - + Crear un pentágono en el boceto @@ -846,12 +846,12 @@ Create square - + Crear cuadrado Create a square in the sketch - + Crear un cuadrado en el boceto @@ -882,12 +882,12 @@ Create equilateral triangle - + Crear triángulo equilátero Create an equilateral triangle in the sketch - + Crear un triángulo equilátero en el boceto @@ -905,7 +905,7 @@ Edit the selected sketch - + Editar el boceto seleccionado @@ -973,7 +973,7 @@ Merge sketches - + Combinar bocetos @@ -983,7 +983,7 @@ Select at least two sketches, please. - + Seleccione al menos dos bocetos, por favor. @@ -1051,12 +1051,12 @@ Show/hide internal geometry - + Mostrar/ocultar geometrías internas Show all internal geometry / hide unused internal geometry - + Mostrar geometría interna / ocultar geometría interna no utilizada @@ -1070,7 +1070,7 @@ Select Conflicting Constraints - + Seleccionar las restricciones en conflicto @@ -1083,12 +1083,12 @@ Select Constraints - + Seleccione restricciones Select the constraints associated to the selected elements - + Marcar las restricciones asociadas a los elementos seleccionados @@ -1102,7 +1102,7 @@ Select Elements associated with constraints - + Seleccionar los elementos asociados a las restricciones @@ -1115,12 +1115,12 @@ Select Horizontal Axis - + Seleccionar Eje Horizontal Select the horizontal axis - + Seleccione el eje horizontal @@ -1133,12 +1133,12 @@ Select Origin - + Seleccione origen Select the origin point - + Seleccione el punto origen @@ -1152,7 +1152,7 @@ Select Redundant Constraints - + Seleccionar Restricciones Redundantes @@ -1165,12 +1165,12 @@ Select Vertical Axis - + Seleccionar Eje Vertical Select the vertical axis - + Seleccione el eje vertical @@ -1352,7 +1352,7 @@ - + Wrong selection Selección incorrecta @@ -1387,7 +1387,7 @@ - + Impossible constraint Restricción imposible @@ -1458,29 +1458,29 @@ Cannot add a fixed x-coordinate constraint on an external geometry! - + ¡No se puede crear una restricción sobre la coordenada X en una geometría externa! Cannot add a fixed x-coordinate constraint on the root point! - + ¡No se puede agregar una restricción de coordenada x fija en el punto de origen! Cannot add a fixed y-coordinate constraint on an external geometry! - + ¡No se puede crear una restricción sobre la coordenada Y en una geometría externa! Cannot add a fixed y-coordinate constraint on the root point! - + ¡No se puede agregar una restricción coordenada fija en el punto de origen! Select one or more arcs or circles from the sketch. - + Seleccione uno o más arcos o círculos del croquis. @@ -1490,88 +1490,88 @@ Do you want to share the same radius for all selected elements? - + ¿Quieres compartir el mismo radio para todos los elementos seleccionados? Select only entities from the sketch. - + Seleccione sólo entidades del croquis. Select one or two lines from the sketch. Or select two edges and a point. - + Seleccione una o dos líneas del croquis. O seleccione un punto y dos aristas. Parallel lines - + Líneas paralelas An angle constraint cannot be set for two parallel lines. - + No se puede restringir el ángulo entre líneas paralelas. Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Seleccione dos puntos finales de líneas para actuar como rayos y una arista que representa un límite. El primer punto seleccionado corresponde al índice n1, n2 - al segundo y valor de referencia establece la relación n2/n1. Selected objects are not just geometry from one sketch. - + Los objetos seleccionados no son sólo la geometría de un croquis. Number of selected objects is not 3 (is %1). - + El número de objetos seleccionados no es 3 (es %1). Incompatible geometry is selected! - + ¡Se han seleccionado geometrías incompatibles! Select at least one ellipse and one edge from the sketch. - + Seleccione al menos una elipse y una curva del boceto. Sketch axes cannot be used in internal alignment constraint - + Ejes del croquis no pueden ser usados en el alineamiento interno de restricciones You can not internally constraint an ellipse on other ellipse. Select only one ellipse. - + No puedes restringir internamente una elipse con otra elipse. Solamente selecciona una elipse. Maximum 2 points are supported. - + Se soporta máximo 2 punto. Maximum 2 lines are supported. - + Se soporta máximo 2 líneas. Nothing to constraint - + Nada que restringir Currently all internal geometry of the ellipse is already exposed. - + La geometría interna de la elipse ya está expuesta al completo. @@ -1579,39 +1579,39 @@ Extra elements - + Elementos adicionales More elements than possible for the given ellipse were provided. These were ignored. - + Se han proporcionado más elementos de los necesarios para la elipse dada. Se han ignorado. You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. - + No puedes restringir internamente un arco de elipse con otro arco de elipse. Selecciona un solo arco de elipse. You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + No puedes restringir internamente una elipse con un arco de elipse. Selecciona una sola elipse o un arco de elipse. Currently all internal geometry of the arc of ellipse is already exposed. - + La geometría interna del arco de elipse ya está expuesta por completo. More elements than possible for the given arc of ellipse were provided. These were ignored. - + Se han proporcionado más elementos de los necesarios para la elipse dada. Se han ignorado. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Actualmente sólo es soportada la geometría interna de elipse o arco de elipse. El último elemento seleccionado debe ser una elipse o un arco de elipse. Select exactly two vertexes from the sketch. @@ -1716,33 +1716,34 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. perpendicular constraint - + Esta restricción se puede aplicar de varias formas. +Las combinaciones posibles son: dos curvas; extremo y curva; dos extremos; dos curvas y un punto. Select some geometry from the sketch. perpendicular constraint - + Seleccione alguna geometría del croquis. Wrong number of selected objects! perpendicular constraint - + ¡Número incorrecto de objetos seleccionados! Error - + Error With 3 objects, there must be 2 curves and 1 point. tangent constraint - + Con 3 objetos, debe haber 2 curvas y 1 punto. @@ -1773,19 +1774,20 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. tangent constraint - + Esta restricción se puede aplicar de varias formas. +Las combinaciones posibles son: dos curvas; extremo y curva; dos extremos; dos curvas y un punto. Select some geometry from the sketch. tangent constraint - + Seleccione alguna geometría del croquis. Wrong number of selected objects! tangent constraint - + ¡Número incorrecto de objetos seleccionados! @@ -1898,7 +1900,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Seleccionar exactamente dos entidades del dibujo. - + Edit sketch Editar boceto @@ -1970,39 +1972,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select at least two edges from the sketch. - + Seleccione al menos dos aristas del croquis. One selected edge is not connectable - + Una arista seleccionada no es conectable Closing a shape formed by exactly two lines makes no sense. - + Cerrar un cuerpo formada por exactamente dos líneas carece de sentido. Select elements from a single sketch. - + Seleccione los elementos de un único boceto. No constraint selected - + Ninguna restricción seleccionada At least one constraint must be selected - + Se debe seleccionar al menos una restricción - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Actualmente sólo es soportada la geometría interna de elipse o arco de elipse. El último elemento seleccionado debe ser una elipse o un arco de elipse. @@ -2079,19 +2081,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio Constraint_SnellsLaw - + Índice refracción Ratio n2/n1: Constraint_SnellsLaw - + Razón n2/n1: Change radius - + Cambiar radio @@ -2103,12 +2105,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio - + Índice refracción Ratio n2/n1: - + Razón n2/n1: @@ -2149,7 +2151,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unnamed - + Sin nombre @@ -2269,21 +2271,17 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Constraint color - - - - Constrain color - Color de las restricciones + Color de las restricciones Datum color - Datum color + Color de datos Datum text size - Datum text size + Tamaño del datos @@ -2328,7 +2326,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Grid line pattern - Grid line pattern + Patrón de línea de cuadrícula @@ -2339,43 +2337,109 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::SketcherValidation - + No missing coincidences - No missing coincidences + No faltan coincidencias No missing coincidences found - No missing coincidences found + No se encontre coincidencias faltando Missing coincidences - Missing coincidences + Falta de coincidencias %1 missing coincidences found - %1 missing coincidences found + %1 coincidencias faltando No invalid constraints - + Sin restricciones no válidas No invalid constraints found - + No se encontraron restricciones no válidas Invalid constraints - + Restricciones no válidas Invalid constraints found + Se han encontrado restricciones no válidas + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. @@ -2427,47 +2491,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Type: - + Tipo: Edge - + Arista Starting Point - + Inicio End Point - + Fin Center Point - + Centro Extended Naming - + Nombramiento extendido Auto-switch to Edge - + Cambiar automáticamente al Borde <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> - + <html><head/><body><p>&quot;Ctrl&quot;: selección múltiple</p><p>&quot;Z&quot;: cambia al siguiente tipo válido</p></body></html> Elements - + Elementos @@ -2475,7 +2539,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Point - + Punto @@ -2483,7 +2547,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - + Línea @@ -2491,7 +2555,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc - + Arco @@ -2499,19 +2563,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Circle - + Circunferencia Ellipse - + Elipse Elliptical Arc - + Arco elíptico @@ -2519,7 +2583,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Other - + Otros @@ -2539,10 +2603,6 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Grid size: Tamaño de cuadrícula: - - mm - mm - Grid snap @@ -2652,34 +2712,65 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher validation - Sketcher validation + Validación de croquis - + + Delete constraints to external geom. + + + + Missing coincidences - Missing coincidences + Falta de coincidencias Tolerance: Tolerancia: + + + Reversed external geometry + + + + + Swap endpoints in constraints + + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + Find Encontrar - - + + Fix Reparar - + Invalid constraints - + Restricciones no válidas @@ -2687,13 +2778,13 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid sketch - + Boceto no válido The sketch is invalid and cannot be edited. Use the sketch validation tool. - + El boceto no es válido y no puede editarse. Use la herramienta para validar bocetos. @@ -2723,24 +2814,24 @@ Use the sketch validation tool. Over-constrained sketch - + Boceto sobre-restringido (click to select) - + (haga clic para seleccionar) Sketch contains conflicting constraints - + Boceto contiene restricciones conflictivas Sketch contains redundant constraints - + Boceto contiene restricciones redundantes Over-constrained sketch @@ -2813,7 +2904,7 @@ Use the sketch validation tool. Create an arc of ellipse by its center, major radius, endpoints - + Crear un arco de elipse mediante centro, radio mayor y extremos @@ -2831,7 +2922,7 @@ Use the sketch validation tool. Create a ellipse by periapsis, apoapsis, and minor radius - + Crear una elipse mediante periapsis, apoapsis y radio menor @@ -2840,7 +2931,7 @@ Use the sketch validation tool. Create an ellipse by center, major radius and point - + Crear una elipse mediante centro, radio mayor y un punto @@ -2849,7 +2940,7 @@ Use the sketch validation tool. Create a heptagon by its center and by one corner - + Crear un heptágono mediante centro y vértice @@ -2858,7 +2949,7 @@ Use the sketch validation tool. Create a hexagon by its center and by one corner - + Crear un hexágono mediante centro y vértice @@ -2867,7 +2958,7 @@ Use the sketch validation tool. Create an octagon by its center and by one corner - + Crear un octágono mediante centro y vértice @@ -2876,7 +2967,7 @@ Use the sketch validation tool. Create a pentagon by its center and by one corner - + Crear un pentágono mediante centro y vértice @@ -2885,7 +2976,7 @@ Use the sketch validation tool. Create a square by its center and by one corner - + Crear un cuadrado mediante centro y vértice @@ -2894,7 +2985,7 @@ Use the sketch validation tool. Create an equilateral triangle by its center and by one corner - + Crear un triángulo equilátero mediante centro y vértice @@ -2902,7 +2993,7 @@ Use the sketch validation tool. Sketch has support - Sketch has support + Croquis tiene soporte @@ -2966,7 +3057,7 @@ Do you want to detach it from the support? Sketcher tools - + Herramientas del boceto Sketcher geoms diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.qm index 0d22fb12f9..d87958072d 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts index 106dd33996..663d107bc6 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts @@ -11,12 +11,12 @@ Close Shape - + Sulje muoto Produce closed shape by Link end point of element with next elements' starting point - + Tuota suljettu muoto kytkemällä kohteen päätepiste seuraavan kohteen alkupisteeseen @@ -34,17 +34,17 @@ Create an arc in the sketcher - Create an arc in the sketcher + Luo kaari luonnostyökalulla Center and end points - Center and end points + Keski- ja loppupisteet End points and rim point - End points and rim point + Loppupisteet ja kehän kohta @@ -62,17 +62,17 @@ Create a circle in the sketcher - Create a circle in the sketcher + Luo ympyrä luonnostyökalulla Center and rim point - Center and rim point + keskipiste ja kehäpiste 3 rim points - 3 rim points + 3 kehän pistettä @@ -85,27 +85,27 @@ Create a conic - + Luo kartio Create a conic in the sketch - + Luo kartio luonnokseen Ellipse by center, major radius, point - + Ellipsi keskipisteellä, pääsäteellä tai pisteellä Ellipse by Periapsis, apoapsis, minor radius - + Ellipsi kauimmalla pisteellä, lähimmällä pisteellä tai pienellä säteellä Arc of ellipse by center, major radius, endpoints - + Ellipsin kaari keskipisteellä, suurella säteellä, päätepisteillä @@ -118,42 +118,42 @@ Create regular polygon - + Luo säännöllinen monikulmio Create an regular polygon in the sketcher - + Luo säännöllinen monikulmio luonnostyökalulla Triangle - + Kolmio Square - + Neliö Pentagon - + Viisikulmio Hexagon - + Kuusikulmio Heptagon - + Seitsenkulmio Octagon - + Kahdeksankulmio @@ -166,12 +166,12 @@ Connect Edges - + Yhdistä reunat Link end point of element with next elements' starting point - + Yhdistä kohteen päätepiste seuraavan kohteen alkupisteeseen @@ -287,7 +287,7 @@ Create an equality constraint between two lines or between circles and arcs - Luo yhtäsuuruus rajoite kahdelle viivalle tai ympyröille ja kaarille + Luo yhtäsuuruus rajoite kahdelle viivan tai ympyröiden ja kaarien väliin @@ -318,12 +318,12 @@ Constrain InternalAlignment - + Rajoita SisäinenTasaus Constrains an element to be aligned with the internal geometry of another element - + Rajoitus: kohde tasataan toisen kohteen sisäisen geometrian kanssa @@ -377,7 +377,7 @@ Create a perpendicular constraint between two lines - Create a perpendicular constraint between two lines + Luo kohtisuora rajoitus kahden viivan väliin Create a Perpendicular constraint between two lines @@ -430,12 +430,12 @@ Constrain refraction (Snell's law') - + Rajoita taittuminen (Snellin laki) Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - + Luo taittumislaki (Snellin laki) Rajoitus säteiden kahden päätepisteen kanssa ja liitäntänä on reuna. @@ -453,7 +453,7 @@ Create a symmetry constraint between two points with respect to a line or a third point - Create a symmetry constraint between two points with respect to a line or a third point + Luo symmetrinen rajoite kahden pisteen väliin suhteessa viivaan tai kolmanteen pisteeseen Create an symmetry constraint between two points with respect to a line @@ -506,12 +506,12 @@ Create arc by three points - Create arc by three points + Luo kaari kolmella pistettä Create an arc by its end points and a point along the arc - Create an arc by its end points and a point along the arc + Luoda kaari sen loppupisteistä ja kaarella olevasta pisteestä @@ -524,12 +524,12 @@ Create circle by three points - Create circle by three points + Luo ympyrä kolmella pistettä Create a circle by 3 perimeter points - Create a circle by 3 perimeter points + Luo ympyrä kolmella kehän pisteellä @@ -542,12 +542,12 @@ Create arc by center - Create arc by center + Luo kaari keskipistettä Create an arc by its center and by its end points - Create an arc by its center and by its end points + Luo kaari sen keskipisteellä ja sen loppupisteillä Create arc @@ -568,12 +568,12 @@ Create an arc of ellipse - + Luo ellipsin kaari Create an arc of ellipse in the sketch - + Luo ellipsin kaaren luonnoksessa @@ -622,12 +622,12 @@ Create ellipse by 3 points - + Luo ellipsi 3:lla pisteellä Create an ellipse by 3 points in the sketch - + Luo ellipsi 3 pisteellä luonnoksessa @@ -640,12 +640,12 @@ Create ellipse by center - + Luo ellipsi keskipisteen avulla Create an ellipse by center in the sketch - + Luo ellipsi keskipisteen avulla luonnoksessa @@ -680,12 +680,12 @@ Create heptagon - + Luo seitsenkulmio Create a heptagon in the sketch - + Luo seitsenkulmio luonnoksessa @@ -698,12 +698,12 @@ Create hexagon - + Luo kuusikulmio Create a hexagon in the sketch - + Luo kuusikulmio luonnoksessa @@ -721,7 +721,7 @@ Create a line in the sketch - Luo viivan luonnoksessa + Luo viiva luonnoksessa @@ -734,12 +734,12 @@ Create octagon - + Luo kahdeksankulmio Create an octagon in the sketch - + Luo kahdeksankulmio luonnoksessa @@ -752,12 +752,12 @@ Create pentagon - + Luo viisikulmio Create a pentagon in the sketch - + Luo viisikulmio luonnoksessa @@ -793,7 +793,7 @@ Create a polyline in the sketch. 'M' Key cycles behaviour - Create a polyline in the sketch. 'M' Key cycles behaviour + Luo murtoviivan luonnos. 'M' avain ohjaa käyttäytymistä Create a polyline in the sketch @@ -828,12 +828,12 @@ Create slot - Create slot + Luo rako Create a slot in the sketch - Create a slot in the sketch + Luo rako luonnokseen @@ -846,12 +846,12 @@ Create square - + Luo neliö Create a square in the sketch - + Luo neliö luonnoksessa @@ -882,12 +882,12 @@ Create equilateral triangle - + Luo tasasivuinen kolmio Create an equilateral triangle in the sketch - + Luo tasasivuinen kolmio luonnoksessa @@ -905,7 +905,7 @@ Edit the selected sketch - + Muokkaa valittua luonnosta @@ -973,7 +973,7 @@ Merge sketches - + Yhdistä luonnokset @@ -983,7 +983,7 @@ Select at least two sketches, please. - + Valitse vähintään kaksi luonnosta, ole hyvä. @@ -1033,12 +1033,12 @@ Reorient sketch... - Reorient sketch... + Suuntaa luonnos... Reorient the selected sketch - Reorient the selected sketch + Suuntaa valittu luonnos @@ -1051,12 +1051,12 @@ Show/hide internal geometry - + Näytä/Piilota sisäinen geometria Show all internal geometry / hide unused internal geometry - + Näytä kaikki sisäinen geometria / Piilota käyttämätön sisäinen geometria @@ -1070,7 +1070,7 @@ Select Conflicting Constraints - + Valitse ristiriitaiset rajoitteet @@ -1083,12 +1083,12 @@ Select Constraints - + Valitse rajoitteet Select the constraints associated to the selected elements - + Valitse rajoitteet, jotka liittyvät valittuihin osiin @@ -1102,7 +1102,7 @@ Select Elements associated with constraints - + Valitse osat, jotka liittyvät rajoituksiin @@ -1115,12 +1115,12 @@ Select Horizontal Axis - + Valitse vaaka-akseli Select the horizontal axis - + Valitse se vaaka-akseli @@ -1133,12 +1133,12 @@ Select Origin - + Valitse alkuperä Select the origin point - + Valitse aloituskohta @@ -1152,7 +1152,7 @@ Select Redundant Constraints - + Valitse tarpeettomat rajoitteet @@ -1165,12 +1165,12 @@ Select Vertical Axis - + Valitse pystyakseli Select the vertical axis - + Valitse se pystyakseli @@ -1223,12 +1223,12 @@ Validate sketch... - Validate sketch... + Vahvista luonnos... Validate sketch - Validate sketch + Vahvista luonnos @@ -1238,7 +1238,7 @@ Select one sketch, please. - Select one sketch, please. + Valitse yksi luonnos, ole hyvä. @@ -1352,7 +1352,7 @@ - + Wrong selection Väärä valinta @@ -1387,7 +1387,7 @@ - + Impossible constraint Mahdoton rajoite @@ -1458,29 +1458,29 @@ Cannot add a fixed x-coordinate constraint on an external geometry! - + Ei voi lisätä kiinteätä x-koordinaatin rajoitusta ulkoiseen geometriaan! Cannot add a fixed x-coordinate constraint on the root point! - + Ei voi lisätä kiinteätä x-koordinaatin rajoitusta ydinpisteeseen! Cannot add a fixed y-coordinate constraint on an external geometry! - + Ei voi lisätä kiinteätä y-koordinaatin rajoitusta ulkoiseen geometriaan! Cannot add a fixed y-coordinate constraint on the root point! - + Ei voi lisätä kiinteätä y-koordinaatin rajoitusta ydinpisteeseen! Select one or more arcs or circles from the sketch. - + Valitse yksi tai userampia kaaria tai ympyröitä luonnoksesta. @@ -1490,88 +1490,88 @@ Do you want to share the same radius for all selected elements? - + Haluat jakaa saman säteen kaikissa valituissa osissa? Select only entities from the sketch. - + Valitse kohteita vain luonnoksesta. Select one or two lines from the sketch. Or select two edges and a point. - + Valitse yksi tai useampi viiva luonnoksesta. Tai valitse kaksi reunaa ja piste. Parallel lines - + Samansuuntaiset viivat An angle constraint cannot be set for two parallel lines. - + Kulma-rajoitusta ei voi määrittää kahdelle samansuuntaiselle viivalle. Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Valitse kaksi viivojen päätepistettä säteinä toimimaan sekä reuna kuvaamaan rajaa. Ensimmäinen valittu piste vastaa indeksiä n1, toinen - n2 ja viitearvo määrittää suhteen n2/n1. Selected objects are not just geometry from one sketch. - + Valitut kohteet eivät ole vain yhden luonnoksen geometriaa. Number of selected objects is not 3 (is %1). - + Valittuja kohteita ei ole 3 (on %1). Incompatible geometry is selected! - + Sopimaton geometria on valittu! Select at least one ellipse and one edge from the sketch. - + Valitse vähintään yksi ellipsi ja yksi reuna luonnoksesta. Sketch axes cannot be used in internal alignment constraint - + Luonnoksen akseleita ei voi käyttää sisäisen tasauksen rajoitteessa You can not internally constraint an ellipse on other ellipse. Select only one ellipse. - + Et voi sisäisesti rajoittaa ellipsiä toisen ellipsin päällä. Valitse vain yksi ellipsi. Maximum 2 points are supported. - + Enintään 2 pistettä ovat tuettuja. Maximum 2 lines are supported. - + Enintään 2 viivaa ovat tuettuja. Nothing to constraint - + Ei mitään rajoitettavaa Currently all internal geometry of the ellipse is already exposed. - + Tällä hetkellä kaikki ellipsin sisäinen geometria on jo paljastettu. @@ -1579,39 +1579,39 @@ Extra elements - + Ylimääräisiä osia More elements than possible for the given ellipse were provided. These were ignored. - + Enemmän osia kuin on mahdollista annettuun määriteltyyn ellipsiin. Nämä jätettiin huomiotta. You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. - + Et voi sisäisesti rajoittaa kaarta tai ellipsiä toisen karen tai ellipsin päällä. Valitse vain yksi kaari tai ellipsi. You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Et voi sisäisesti rajoittaa ellipsiä toisen ellipsin kaaren päällä. Valitse vain yksi ellipsi tai ellipsin kaari. Currently all internal geometry of the arc of ellipse is already exposed. - + Tällä hetkellä kaikki ellipsin kaaren sisäinen geometria on jo paljastettu. More elements than possible for the given arc of ellipse were provided. These were ignored. - + Enemmän osia kuin on mahdollista annettuun määriteltyyn ellipsin kaareen. Nämä jätettiin huomiotta. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Tällä hetkellä sisäinen geometria tuetaan vain ellipsille tai ellipsin kaarelle. Viimeksi valitun osan on oltava ellipsi tai ellipsin kaari. Select exactly two vertexes from the sketch. @@ -1621,7 +1621,7 @@ Select two or more vertexes from the sketch. - Select two or more vertexes from the sketch. + Valitse vähintään kaksi kärkipistettä luonnoksesta. @@ -1716,33 +1716,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. perpendicular constraint - + On useita tapoja tehdä tämä rajoite. + +Hyväksytyt yhdistelmät: kaksi käyrää; päätepiste ja käyrä; kaksi päätepistettä; kaksi käyrää ja piste. Select some geometry from the sketch. perpendicular constraint - + Valitse jokin geometria luonnoksesta. Wrong number of selected objects! perpendicular constraint - + Väärä lukumäärä valittuja kohteita! Error - + Virhe With 3 objects, there must be 2 curves and 1 point. tangent constraint - + 3 kohteella on oltava 2 käyrää ja 1 piste. @@ -1773,19 +1775,21 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. tangent constraint - + On useita tapoja tehdä tämä rajoite. + +Hyväksytyt yhdistelmät: kaksi käyrää; päätepiste ja käyrä; kaksi päätepistettä; kaksi käyrää ja piste. Select some geometry from the sketch. tangent constraint - + Valitse jokin geometria luonnoksesta. Wrong number of selected objects! tangent constraint - + Väärä lukumäärä valittuja kohteita! @@ -1847,7 +1851,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. - Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. + Valitse kaksi pistettä ja symmetria linja, kaksi pistettä ja symmetria kohta, tai linja ja symmetriakohta luonnoksesta. @@ -1898,7 +1902,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Valitse täsmälleen kaksi yksikköä sketsistä. - + Edit sketch Muokkaa luonnosta @@ -1970,39 +1974,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select at least two edges from the sketch. - + Valitse vähintään kaksi reunaa luonnoksesta. One selected edge is not connectable - + Yksi valittu reuna ei ole liitettävissä Closing a shape formed by exactly two lines makes no sense. - + Muodon sulkeminen tehtynä täsmälleen kahdella viivalla on järjetöntä. Select elements from a single sketch. - + Valitse osat yhdestä luonnkoksesta. No constraint selected - + Ei rajoitetta valittuna At least one constraint must be selected - + Vähintään yksi rajoite on valittava - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Tällä hetkellä sisäinen geometria tuetaan vain ellipsille ja ellipsin kaarelle. Viimeksi valitun osan on oltava ellipsi tai ellipsin kaari. @@ -2060,7 +2064,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert angle - Insert angle + Aseta kulma @@ -2072,26 +2076,26 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert radius - Insert radius + Aseta säde Refractive index ratio Constraint_SnellsLaw - + Taitekerroin suhdeluku Ratio n2/n1: Constraint_SnellsLaw - + Suhde n2/n1: Change radius - + Vaihda sädettä @@ -2103,18 +2107,18 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio - + Taitekerroin suhdeluku Ratio n2/n1: - + Suhde n2/n1: Insert length - Insert length + Aseta pituus @@ -2149,7 +2153,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unnamed - + Nimetön @@ -2200,39 +2204,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher colors - Sketcher colors + Luonnostyökalun värit Default edge color - Default edge color + Oletusarvoinen reunan väri The color of edges being edited - The color of edges being edited + Reunojen väriä on muokattu Default vertex color - Default vertex color + Päätepisteen oletusväri The color of vertices being edited - The color of vertices being edited + Kärkipisteiden väriä on muokattu Edit edge color - Edit edge color + Muokkaa reunaväriä Edit vertex color - Edit vertex color + Muokaka kärkipisteen väriä @@ -2242,7 +2246,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c The color of construction geometry in edit mode - The color of construction geometry in edit mode + Rakennegeometrian väri muokkaustilassa @@ -2252,45 +2256,41 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c The color of external geometry in edit mode - The color of external geometry in edit mode + Ulkoisen geometrian väri muokkaustilassa Fully constrained geometry - Fully constrained geometry + Täysin rajoitettu geometria The color of fully constrained geometry in edit mode - The color of fully constrained geometry in edit mode + Täysin rajatun geometrian väli muokkaustilassa Constraint color - - - - Constrain color - Constrain color + Rajoita väri Datum color - Datum color + Rajoitteiden väri Datum text size - Datum text size + Rajoitteiden tekstikoko The default line thickness for new shapes - The default line thickness for new shapes + Uusien muotojen viivojen oletuspaksuus @@ -2303,79 +2303,145 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Default vertex size - Default vertex size + Päätepisteen oletuskoko Default line width - Default line width + Oletusarvo viivan leveydelle Cursor text color - Cursor text color + Kohdistimen tekstin väri Sketch editing - Sketch editing + Luonnoksen muokkaaminen Font size - Font size + Kirjasimen koko Grid line pattern - Grid line pattern + Ruudukon viivakuvio Ask for value after creating a distance constraint - Ask for value after creating a distance constraint + Pyydä arvo etäisyysrajoitteen luomisen jälkeen SketcherGui::SketcherValidation - + No missing coincidences - No missing coincidences + Ei puuttuvia yhteensattumia No missing coincidences found - No missing coincidences found + Ei puuttuvia yhteensattumia löydettävissä Missing coincidences - Missing coincidences + Puuttuvat yhteensattumia %1 missing coincidences found - %1 missing coincidences found + %1 puuttuvia yhteensattumia löytyi No invalid constraints - + Virheellinen rajoitukset No invalid constraints found - + Ei ole löytynyt virheellisiä rajoituksia Invalid constraints - + Epäkelpoja rajoituksia Invalid constraints found + Virheellisiä rajoituksia löytyi + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. @@ -2427,47 +2493,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Type: - + Tyyppi: Edge - + Reuna Starting Point - + Lähtöpiste End Point - + Päätepiste Center Point - + Keskipiste Extended Naming - + Laajennettu nimeäminen Auto-switch to Edge - + Automaattien vaihto reunaan <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> - + <html><head/><body><p>&quot;Ctrl&quot;: monivalinta</p><p>&quot;Z&quot;: siirry seuraavaan kelvolliseen tyyppiin</p></body></html> Elements - + Osat @@ -2475,7 +2541,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Point - + Piste @@ -2483,7 +2549,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - + Viiva @@ -2491,7 +2557,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc - + Kaari @@ -2499,19 +2565,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Circle - + Ympyrä Ellipse - + Ellipsi Elliptical Arc - + Elliptinen kaari @@ -2519,7 +2585,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Other - + Muu @@ -2532,17 +2598,13 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Show grid - Show grid + Näytä ruudukko Grid size: Ruudukon koko: - - mm - mm - Grid snap @@ -2652,34 +2714,65 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher validation - Sketcher validation + Luönnostyökalun kokeilu ja kelpuutus - + + Delete constraints to external geom. + + + + Missing coincidences - Missing coincidences + Puuttuvat yhteensattumia Tolerance: - Tolerance: + Toleranssi: + + + + Reversed external geometry + + + + + Swap endpoints in constraints + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + Find - Find + Etsi - - + + Fix - Fix + Korjaa - + Invalid constraints - + Epäkelpoja rajoituksia @@ -2687,13 +2780,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid sketch - + Virheellinen luonnos The sketch is invalid and cannot be edited. Use the sketch validation tool. - + Luonnos on virheellinen eikä sitä voida muokata. +Käytä luonnoksen kelpuutustyökalua. @@ -2723,24 +2817,24 @@ Use the sketch validation tool. Over-constrained sketch - + Liian rajoitettu luonnos (click to select) - + (Valitse napsauttamalla) Sketch contains conflicting constraints - + Luonnos sisältää ristiriitaisia rajoituksIa Sketch contains redundant constraints - + Luonnos sisältää tarpeettomia rajoituksia Over-constrained sketch @@ -2786,7 +2880,7 @@ Use the sketch validation tool. Create an arc by its end points and a point along the arc - Create an arc by its end points and a point along the arc + Luoda kaari sen loppupisteistä ja kaarella olevasta pisteestä @@ -2795,7 +2889,7 @@ Use the sketch validation tool. Create a circle by 3 rim points - Create a circle by 3 rim points + Luo ympyrä kehän 3:sta pisteestä @@ -2804,7 +2898,7 @@ Use the sketch validation tool. Create an arc by its center and by its end points - Create an arc by its center and by its end points + Luo kaari sen keskipisteellä ja sen loppupisteillä @@ -2813,7 +2907,7 @@ Use the sketch validation tool. Create an arc of ellipse by its center, major radius, endpoints - + Luo ellipsin kaari keskipisteellä, suurella säteellä, päätepisteillä @@ -2822,7 +2916,7 @@ Use the sketch validation tool. Create a circle by its center and by a rim point - Create a circle by its center and by a rim point + Luoda ympyrä sen keskipisteellä ja kehän pisteellä @@ -2831,7 +2925,7 @@ Use the sketch validation tool. Create a ellipse by periapsis, apoapsis, and minor radius - + Luo ellipsi kauimmalla pisteellä, lähimmällä pisteellä ja pienellä säteellä @@ -2840,7 +2934,7 @@ Use the sketch validation tool. Create an ellipse by center, major radius and point - + Luo ellipsi keskipisteellä, suurella säteellä ja pisteellä @@ -2849,7 +2943,7 @@ Use the sketch validation tool. Create a heptagon by its center and by one corner - + Luo seitsenkulmio keskipisteellä ja yhdellä kulmalla @@ -2858,7 +2952,7 @@ Use the sketch validation tool. Create a hexagon by its center and by one corner - + Luo kuusikulmio keskipisteellä ja yhdellä kulmalla @@ -2867,7 +2961,7 @@ Use the sketch validation tool. Create an octagon by its center and by one corner - + Luo kahdeksankulmio keskipisteellä ja yhdellä kulmalla @@ -2876,7 +2970,7 @@ Use the sketch validation tool. Create a pentagon by its center and by one corner - + Luo viisikulmio keskipisteellä ja yhdellä kulmalla @@ -2885,7 +2979,7 @@ Use the sketch validation tool. Create a square by its center and by one corner - + Luo neliö keskipisteellä ja yhdellä kulmalla @@ -2894,7 +2988,7 @@ Use the sketch validation tool. Create an equilateral triangle by its center and by one corner - + Luo tasasivuinen kolmio keskipisteellä ja yhdellä kulmalla @@ -2902,14 +2996,14 @@ Use the sketch validation tool. Sketch has support - Sketch has support + Luonnoksella on tuki Sketch with a support face cannot be reoriented. Do you want to detach it from the support? - Sketch with a support face cannot be reoriented. -Do you want to detach it from the support? + Luonnos, jolla on tukinäkymä, ei voida suunnata uudelleen. +Haluatko irrottaa sen näkymän tuesta? @@ -2966,7 +3060,7 @@ Do you want to detach it from the support? Sketcher tools - + Luonnostyökalut Sketcher geoms diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm index e4f419af0e..ead8a69a34 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts index 2acac94e29..7cc91df041 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts @@ -11,12 +11,12 @@ Close Shape - + Fermer la forme Produce closed shape by Link end point of element with next elements' starting point - + Produire la forme fermée en liant le point d'arriver de l'élément avec le point de départ de l'élément suivant @@ -85,27 +85,27 @@ Create a conic - + Créer une conique Create a conic in the sketch - + Créer une conique dans l’esquisse Ellipse by center, major radius, point - + Ellipse par centre, demi-grand axe, point Ellipse by Periapsis, apoapsis, minor radius - + Ellipse de périapse, apoapse, demi-petit axe Arc of ellipse by center, major radius, endpoints - + Arc d'ellipse par centre, demi-grand axe, extrémités @@ -118,42 +118,42 @@ Create regular polygon - + Créer un polygone régulier Create an regular polygon in the sketcher - + Créez un polygone régulier dans l'esquisse Triangle - + Triangle Square - + Carré Pentagon - + Pentagone Hexagon - + Hexagone Heptagon - + Heptagon Octagon - + Octogone @@ -166,12 +166,12 @@ Connect Edges - + Raccorder les arêtes Link end point of element with next elements' starting point - + Lier le point d'arriver de l'élément avec le point de départ de l'élément suivant @@ -318,12 +318,12 @@ Constrain InternalAlignment - + Contraindre l'alignement interne Constrains an element to be aligned with the internal geometry of another element - + Contraindre un élément pour qu'il soit aligné avec la géométrie interne d'un autre élément @@ -430,12 +430,12 @@ Constrain refraction (Snell's law') - + Contraindre la réfraction (Loi de Snell) Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - + Créer une contrainte de réfraction (Loi de Snell) entre deux points d’extrémités des rayons et une arête en tant qu'interface. @@ -568,12 +568,12 @@ Create an arc of ellipse - + Créer un arc d'ellipse Create an arc of ellipse in the sketch - + Créer un arc d'ellipse dans l'esquisse @@ -622,12 +622,12 @@ Create ellipse by 3 points - + Créer une ellipse via 3 points Create an ellipse by 3 points in the sketch - + Créer une ellipse via 3 points d'esquisse @@ -640,12 +640,12 @@ Create ellipse by center - + Créer une ellipse par son centre Create an ellipse by center in the sketch - + Créer une ellipse par son centre dans l'esquisse @@ -680,12 +680,12 @@ Create heptagon - + Créer un heptagone Create a heptagon in the sketch - + Créer un heptagone dans l'esquisse @@ -698,12 +698,12 @@ Create hexagon - + Créer un hexagone Create a hexagon in the sketch - + Créer un hexagone dans l'esquisse @@ -734,12 +734,12 @@ Create octagon - + Créer un octogone Create an octagon in the sketch - + Créer un octogone dans l'esquisse @@ -752,12 +752,12 @@ Create pentagon - + Créer un Pentagone Create a pentagon in the sketch - + Créer un pentagone dans l'esquisse @@ -846,12 +846,12 @@ Create square - + Créer un carré Create a square in the sketch - + Créer un carré dans l'esquisse @@ -882,12 +882,12 @@ Create equilateral triangle - + Créer un triangle équilatéral Create an equilateral triangle in the sketch - + Créer un triangle équilatéral dans l'esquisse @@ -905,7 +905,7 @@ Edit the selected sketch - + Editer l'esquisse sélectionnée @@ -973,7 +973,7 @@ Merge sketches - + Fusionner les esquisses @@ -983,7 +983,7 @@ Select at least two sketches, please. - + Sélectionnez au moins deux esquisses, s'il vous plaît. @@ -1051,12 +1051,12 @@ Show/hide internal geometry - + Afficher/masquer la géométrie interne Show all internal geometry / hide unused internal geometry - + Afficher toute la géométrie interne / masquer la géométrie interne non utilisée @@ -1070,7 +1070,7 @@ Select Conflicting Constraints - + Sélectionnez des contraintes conflictuelles @@ -1083,12 +1083,12 @@ Select Constraints - + Sélectionnez les contraintes Select the constraints associated to the selected elements - + Sélectionne les contraintes associées aux éléments sélectionnés @@ -1102,7 +1102,7 @@ Select Elements associated with constraints - + Sélectionne les éléments associés aux contraintes @@ -1115,12 +1115,12 @@ Select Horizontal Axis - + Sélectionne l'axe Horizontal Select the horizontal axis - + Sélectionne l'axe horizontal @@ -1133,12 +1133,12 @@ Select Origin - + Sélectionne l'origine Select the origin point - + Sélectionne le point d'origine @@ -1152,7 +1152,7 @@ Select Redundant Constraints - + Sélectionne les contraintes redondantes @@ -1165,12 +1165,12 @@ Select Vertical Axis - + Sélectionne l'axe Verticale Select the vertical axis - + Sélectionne l'axe verticale @@ -1352,7 +1352,7 @@ - + Wrong selection Mauvaise sélection @@ -1387,7 +1387,7 @@ - + Impossible constraint Contrainte impossible @@ -1458,29 +1458,29 @@ Cannot add a fixed x-coordinate constraint on an external geometry! - + Impossible d'ajouter une contrainte de coordonnée horizontale fixe sur une géométrie externe! Cannot add a fixed x-coordinate constraint on the root point! - + Impossible d'ajouter une contrainte fixe de coordonnée x sur le point d'origine ! Cannot add a fixed y-coordinate constraint on an external geometry! - + Impossible d'ajouter une contrainte verticale de coordonnée fixe sur une géométrie externe ! Cannot add a fixed y-coordinate constraint on the root point! - + Impossible d'ajouter une contrainte de coordonnée verticale fixe sur le point d'origine! Select one or more arcs or circles from the sketch. - + Sélectionnez un ou plusieurs arcs ou cercles dans l'esquisse. @@ -1490,88 +1490,88 @@ Do you want to share the same radius for all selected elements? - + Voulez-vous que tous les éléments sélectionnés aient le même rayon? Select only entities from the sketch. - + Sélectionnez uniquement des entités de l'esquisse. Select one or two lines from the sketch. Or select two edges and a point. - + Sélectionnez une ou deux lignes dans l'esquisse. Ou sélectionnez deux arêtes et un point. Parallel lines - + Lignes parallèles An angle constraint cannot be set for two parallel lines. - + Une contrainte angulaire ne peut pas être appliquée à deux lignes parallèles. Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Sélectionnez deux extrémités de lignes pour agir comme des rayons, et une arête qui représente une limite. Le premier point sélectionné correspond à l'indice n1, le deuxième - à n2, et la valeur de la donnée définit la rapport n2/n1. Selected objects are not just geometry from one sketch. - + Les objets sélectionnés ne sont pas seulement des géométries de l'esquisse. Number of selected objects is not 3 (is %1). - + Le nombre d'objets sélectionnés n'est pas égale à 3 (est %1). Incompatible geometry is selected! - + La géométrie sélectionnée est incompatible ! Select at least one ellipse and one edge from the sketch. - + Sélectionnez au moins une ellipse et une arête dans l'esquisse. Sketch axes cannot be used in internal alignment constraint - + Les axes de l'esquisse ne peuvent être utilisés comme contrainte d'alignement interne You can not internally constraint an ellipse on other ellipse. Select only one ellipse. - + Vous ne pouvez pas contraindre en interne une ellipse sur une autre ellipse. Sélectionnez seulement une ellipse. Maximum 2 points are supported. - + 2 points sont supportés au maximum. Maximum 2 lines are supported. - + 2 lignes sont supportés au maximum. Nothing to constraint - + Rien à contrainte Currently all internal geometry of the ellipse is already exposed. - + Actuellement, toute la géométrie interne de l'ellipse est déjà exposée. @@ -1579,39 +1579,39 @@ Extra elements - + Éléments supplémentaires More elements than possible for the given ellipse were provided. These were ignored. - + Vous avez fournis plus d'éléments que possible pour l'ellipse donnée. Ils ont été ignorées. You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. - + Vous ne pouvez pas contraindre en interne un arc d'ellipse sur un autre arc d'ellipse. Sélectionnez seulement un arc d'ellipse. You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Vous ne pouvez pas contraindre en interne une ellipse sur un arc d'ellipse. Sélectionnez seulement une ellipse ou un arc d'ellipse. Currently all internal geometry of the arc of ellipse is already exposed. - + Actuellement, toute la géométrie interne de l'ellipse est déjà exposée. More elements than possible for the given arc of ellipse were provided. These were ignored. - + Vous avez fournis plus d'éléments que possible pour l'ellipse donnée. Ils ont été ignorées. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Actuellement la géométrie interne est uniquement pris en charge pour les ellipses et les arcs d'ellipse. Le dernier élément sélectionné doit être une ellipse ou un arc d'ellipse. Select exactly two vertexes from the sketch. @@ -1716,33 +1716,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. perpendicular constraint - + Cette contrainte peut être appliquée de plusieurs manières. + +Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; deux points d'extrémités ; deux courbes et un point. Select some geometry from the sketch. perpendicular constraint - + Sélectionnez une géométrie de l'esquisse. Wrong number of selected objects! perpendicular constraint - + Nombre d'objets sélectionnés erroné ! Error - + Erreur With 3 objects, there must be 2 curves and 1 point. tangent constraint - + Avec 3 objets, il doit y avoir 2 courbes et 1 point. @@ -1773,19 +1775,21 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. tangent constraint - + Cette contrainte peut être appliquée de plusieurs manières. + +Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; deux points d'extrémités ; deux courbes et un point. Select some geometry from the sketch. tangent constraint - + Sélectionnez une géométrie de l'esquisse. Wrong number of selected objects! tangent constraint - + Nombre d'objets sélectionnés erroné ! @@ -1898,7 +1902,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sélectionnez exactement deux entités de l'esquisse. - + Edit sketch Modifier l'esquisse @@ -1970,39 +1974,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select at least two edges from the sketch. - + Sélectionnez au moins deux arêtes de l'esquisse. One selected edge is not connectable - + Une arête sélectionnée n'est pas raccordable Closing a shape formed by exactly two lines makes no sense. - + Fermer une forme constituée de deux lignes n'a aucun sens. Select elements from a single sketch. - + Sélectionner des éléments d'une seule esquisse. No constraint selected - + Aucune contrainte sélectionnée At least one constraint must be selected - + Au moins une contrainte doit être sélectionnée - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Actuellement la géométrie interne est uniquement pris en charge pour les ellipses et les arcs d'ellipse. Le dernier élément sélectionné doit être une ellipse ou un arc d'ellipse. @@ -2079,19 +2083,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio Constraint_SnellsLaw - + Ratio de l'indice de réfraction Ratio n2/n1: Constraint_SnellsLaw - + Ratio n2/n1 : Change radius - + Changer le rayon @@ -2103,12 +2107,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio - + Ratio de l'indice de réfraction Ratio n2/n1: - + Ratio n2/n1 : @@ -2149,7 +2153,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unnamed - + Sans nom @@ -2269,11 +2273,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Constraint color - - - - Constrain color - Couleur des contraintes + Couleur des contraintes @@ -2339,7 +2339,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::SketcherValidation - + No missing coincidences Aucune coïncidence manquante @@ -2361,21 +2361,87 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c No invalid constraints - + Aucune contrainte non valide No invalid constraints found - + Aucune contrainte non valide trouvée Invalid constraints - + Contraintes non valides Invalid constraints found + Contraintes non valides trouvées + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. @@ -2427,47 +2493,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Type: - + Type : Edge - + Arête Starting Point - + Point de départ End Point - + Point final Center Point - + Point central Extended Naming - + Nom Étendu Auto-switch to Edge - + Basculement automatique vers Arête <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> - + <html><head/><body><p>&quot;Ctrl&quot;: sélection multiple</p><p>&quot;Z&quot;: basculer vers le type valide suivant type</p></body></html> Elements - + Éléments @@ -2475,7 +2541,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Point - + Point @@ -2483,7 +2549,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - + Ligne @@ -2491,7 +2557,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc - + Arc @@ -2499,19 +2565,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Circle - + Cercle Ellipse - + Ellipse Elliptical Arc - + Arc elliptique @@ -2519,7 +2585,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Other - + Autre @@ -2539,10 +2605,6 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Grid size: Taille de la grille : - - mm - mm - Grid snap @@ -2655,7 +2717,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Validation de l'esquisse - + + Delete constraints to external geom. + + + + Missing coincidences Coïncidences manquantes @@ -2664,22 +2731,48 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Tolerance: Tolérance : + + + Reversed external geometry + + + + + Swap endpoints in constraints + + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + Find Rechercher - - + + Fix Réparer - + Invalid constraints - + Contraintes non valides @@ -2687,13 +2780,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid sketch - + Esquisse non valide The sketch is invalid and cannot be edited. Use the sketch validation tool. - + L'esquisse n'est pas valide et ne peut pas être modifiée. +Utilisez l'outil de validation d'esquisse. @@ -2723,24 +2817,24 @@ Use the sketch validation tool. Over-constrained sketch - + Esquisse Sur-contrainte (click to select) - + (cliquez pour sélectionner) Sketch contains conflicting constraints - + L'esquisse contient des contraintes contradictoires Sketch contains redundant constraints - + L'esquisse contient des contraintes redondantes Over-constrained sketch @@ -2813,7 +2907,7 @@ Use the sketch validation tool. Create an arc of ellipse by its center, major radius, endpoints - + Créer un arc d'ellipse par son centre, les rayon majeur, les points de d'extrémités @@ -2831,7 +2925,7 @@ Use the sketch validation tool. Create a ellipse by periapsis, apoapsis, and minor radius - + Créer une ellipse avec le périapse, l'apoapse et le petit rayon @@ -2840,7 +2934,7 @@ Use the sketch validation tool. Create an ellipse by center, major radius and point - + Créer une ellipse avec le centre, le grand rayon et un point @@ -2849,7 +2943,7 @@ Use the sketch validation tool. Create a heptagon by its center and by one corner - + Créer un heptagone avec son centre et un sommet @@ -2858,7 +2952,7 @@ Use the sketch validation tool. Create a hexagon by its center and by one corner - + Créer un hexagone avec son centre et un sommet @@ -2867,7 +2961,7 @@ Use the sketch validation tool. Create an octagon by its center and by one corner - + Créer un octogone avec son centre et un sommet @@ -2876,7 +2970,7 @@ Use the sketch validation tool. Create a pentagon by its center and by one corner - + Créer un pentagone avec son centre et un angle @@ -2885,7 +2979,7 @@ Use the sketch validation tool. Create a square by its center and by one corner - + Créer un carré avec son centre et un angle @@ -2894,7 +2988,7 @@ Use the sketch validation tool. Create an equilateral triangle by its center and by one corner - + Créer un triangle équilatéral avec son centre et un sommet @@ -2966,7 +3060,7 @@ Voulez-vous la détacher de son support ? Sketcher tools - + Outils d'esquisse Sketcher geoms diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.qm index 2bc9788c4d..35809170f9 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts index 34a65e3dbb..1cf4606912 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts @@ -11,12 +11,12 @@ Close Shape - + Close Shape Produce closed shape by Link end point of element with next elements' starting point - + Produce closed shape by Link end point of element with next elements' starting point @@ -85,27 +85,27 @@ Create a conic - + Create a conic Create a conic in the sketch - + Create a conic in the sketch Ellipse by center, major radius, point - + Ellipse by center, major radius, point Ellipse by Periapsis, apoapsis, minor radius - + Ellipse by Periapsis, apoapsis, minor radius Arc of ellipse by center, major radius, endpoints - + Arc of ellipse by center, major radius, endpoints @@ -118,42 +118,42 @@ Create regular polygon - + Create regular polygon Create an regular polygon in the sketcher - + Create an regular polygon in the sketcher Triangle - + Triangle Square - + Square Pentagon - + Pentagon Hexagon - + Hexagon Heptagon - + Heptagon Octagon - + Octagon @@ -166,12 +166,12 @@ Connect Edges - + Connect Edges Link end point of element with next elements' starting point - + Link end point of element with next elements' starting point @@ -318,12 +318,12 @@ Constrain InternalAlignment - + Constrain InternalAlignment Constrains an element to be aligned with the internal geometry of another element - + Constrains an element to be aligned with the internal geometry of another element @@ -430,12 +430,12 @@ Constrain refraction (Snell's law') - + Constrain refraction (Snell's law') Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. @@ -568,12 +568,12 @@ Create an arc of ellipse - + Create an arc of ellipse Create an arc of ellipse in the sketch - + Create an arc of ellipse in the sketch @@ -622,12 +622,12 @@ Create ellipse by 3 points - + Create ellipse by 3 points Create an ellipse by 3 points in the sketch - + Create an ellipse by 3 points in the sketch @@ -640,12 +640,12 @@ Create ellipse by center - + Create ellipse by center Create an ellipse by center in the sketch - + Create an ellipse by center in the sketch @@ -680,12 +680,12 @@ Create heptagon - + Create heptagon Create a heptagon in the sketch - + Create a heptagon in the sketch @@ -698,12 +698,12 @@ Create hexagon - + Create hexagon Create a hexagon in the sketch - + Create a hexagon in the sketch @@ -734,12 +734,12 @@ Create octagon - + Create octagon Create an octagon in the sketch - + Create an octagon in the sketch @@ -752,12 +752,12 @@ Create pentagon - + Create pentagon Create a pentagon in the sketch - + Create a pentagon in the sketch @@ -846,12 +846,12 @@ Create square - + Create square Create a square in the sketch - + Create a square in the sketch @@ -882,12 +882,12 @@ Create equilateral triangle - + Create equilateral triangle Create an equilateral triangle in the sketch - + Create an equilateral triangle in the sketch @@ -905,7 +905,7 @@ Edit the selected sketch - + Edit the selected sketch @@ -973,7 +973,7 @@ Merge sketches - + Merge sketches @@ -983,7 +983,7 @@ Select at least two sketches, please. - + Select at least two sketches, please. @@ -1051,12 +1051,12 @@ Show/hide internal geometry - + Show/hide internal geometry Show all internal geometry / hide unused internal geometry - + Show all internal geometry / hide unused internal geometry @@ -1070,7 +1070,7 @@ Select Conflicting Constraints - + Select Conflicting Constraints @@ -1083,12 +1083,12 @@ Select Constraints - + Select Constraints Select the constraints associated to the selected elements - + Select the constraints associated to the selected elements @@ -1102,7 +1102,7 @@ Select Elements associated with constraints - + Select Elements associated with constraints @@ -1115,12 +1115,12 @@ Select Horizontal Axis - + Select Horizontal Axis Select the horizontal axis - + Select the horizontal axis @@ -1133,12 +1133,12 @@ Select Origin - + Select Origin Select the origin point - + Select the origin point @@ -1152,7 +1152,7 @@ Select Redundant Constraints - + Select Redundant Constraints @@ -1165,12 +1165,12 @@ Select Vertical Axis - + Select Vertical Axis Select the vertical axis - + Select the vertical axis @@ -1352,7 +1352,7 @@ - + Wrong selection Pogrešan odabir @@ -1387,7 +1387,7 @@ - + Impossible constraint Nemoguće ograničenje @@ -1458,29 +1458,29 @@ Cannot add a fixed x-coordinate constraint on an external geometry! - + Cannot add a fixed x-coordinate constraint on an external geometry! Cannot add a fixed x-coordinate constraint on the root point! - + Cannot add a fixed x-coordinate constraint on the root point! Cannot add a fixed y-coordinate constraint on an external geometry! - + Cannot add a fixed y-coordinate constraint on an external geometry! Cannot add a fixed y-coordinate constraint on the root point! - + Cannot add a fixed y-coordinate constraint on the root point! Select one or more arcs or circles from the sketch. - + Select one or more arcs or circles from the sketch. @@ -1490,88 +1490,88 @@ Do you want to share the same radius for all selected elements? - + Do you want to share the same radius for all selected elements? Select only entities from the sketch. - + Select only entities from the sketch. Select one or two lines from the sketch. Or select two edges and a point. - + Select one or two lines from the sketch. Or select two edges and a point. Parallel lines - + Parallel lines An angle constraint cannot be set for two parallel lines. - + An angle constraint cannot be set for two parallel lines. Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Selected objects are not just geometry from one sketch. - + Selected objects are not just geometry from one sketch. Number of selected objects is not 3 (is %1). - + Number of selected objects is not 3 (is %1). Incompatible geometry is selected! - + Incompatible geometry is selected! Select at least one ellipse and one edge from the sketch. - + Select at least one ellipse and one edge from the sketch. Sketch axes cannot be used in internal alignment constraint - + Sketch axes cannot be used in internal alignment constraint You can not internally constraint an ellipse on other ellipse. Select only one ellipse. - + You can not internally constraint an ellipse on other ellipse. Select only one ellipse. Maximum 2 points are supported. - + Maximum 2 points are supported. Maximum 2 lines are supported. - + Maximum 2 lines are supported. Nothing to constraint - + Nothing to constraint Currently all internal geometry of the ellipse is already exposed. - + Currently all internal geometry of the ellipse is already exposed. @@ -1579,39 +1579,39 @@ Extra elements - + Extra elements More elements than possible for the given ellipse were provided. These were ignored. - + More elements than possible for the given ellipse were provided. These were ignored. You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. - + You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Currently all internal geometry of the arc of ellipse is already exposed. - + Currently all internal geometry of the arc of ellipse is already exposed. More elements than possible for the given arc of ellipse were provided. These were ignored. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Select exactly two vertexes from the sketch. @@ -1716,33 +1716,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. perpendicular constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. perpendicular constraint - + Select some geometry from the sketch. Wrong number of selected objects! perpendicular constraint - + Wrong number of selected objects! Error - + Pogreška With 3 objects, there must be 2 curves and 1 point. tangent constraint - + With 3 objects, there must be 2 curves and 1 point. @@ -1773,19 +1775,21 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. tangent constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. tangent constraint - + Select some geometry from the sketch. Wrong number of selected objects! tangent constraint - + Wrong number of selected objects! @@ -1898,7 +1902,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Odaberite točno dva entiteta iz skice. - + Edit sketch Uredi skicu @@ -1970,39 +1974,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select at least two edges from the sketch. - + Select at least two edges from the sketch. One selected edge is not connectable - + One selected edge is not connectable Closing a shape formed by exactly two lines makes no sense. - + Closing a shape formed by exactly two lines makes no sense. Select elements from a single sketch. - + Select elements from a single sketch. No constraint selected - + No constraint selected At least one constraint must be selected - + At least one constraint must be selected - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. @@ -2079,19 +2083,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio Constraint_SnellsLaw - + Refractive index ratio Ratio n2/n1: Constraint_SnellsLaw - + Ratio n2/n1: Change radius - + Change radius @@ -2103,12 +2107,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio - + Refractive index ratio Ratio n2/n1: - + Ratio n2/n1: @@ -2149,7 +2153,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unnamed - + Unnamed @@ -2269,11 +2273,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Constraint color - - - - Constrain color - Constrain color + Constraint color @@ -2339,7 +2339,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::SketcherValidation - + No missing coincidences No missing coincidences @@ -2361,21 +2361,87 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c No invalid constraints - + No invalid constraints No invalid constraints found - + No invalid constraints found Invalid constraints - + Invalid constraints Invalid constraints found + Invalid constraints found + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. @@ -2427,47 +2493,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Type: - + Vrsta: Edge - + Rub Starting Point - + Starting Point End Point - + End Point Center Point - + Center Point Extended Naming - + Extended Naming Auto-switch to Edge - + Auto-switch to Edge <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> - + <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> Elements - + Elements @@ -2475,7 +2541,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Point - + Točka @@ -2483,7 +2549,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - + Linija @@ -2491,7 +2557,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc - + Luk @@ -2499,19 +2565,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Circle - + Krug Ellipse - + Elipsa Elliptical Arc - + Elliptical Arc @@ -2519,7 +2585,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Other - + Other @@ -2539,10 +2605,6 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Grid size: Veličina rešetke: - - mm - mm - Grid snap @@ -2655,7 +2717,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher validation - + + Delete constraints to external geom. + + + + Missing coincidences Missing coincidences @@ -2664,22 +2731,48 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Tolerance: Tolerance: + + + Reversed external geometry + + + + + Swap endpoints in constraints + + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + Find Find - - + + Fix Fix - + Invalid constraints - + Invalid constraints @@ -2687,13 +2780,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid sketch - + Invalid sketch The sketch is invalid and cannot be edited. Use the sketch validation tool. - + The sketch is invalid and cannot be edited. +Use the sketch validation tool. @@ -2723,24 +2817,24 @@ Use the sketch validation tool. Over-constrained sketch - + Over-constrained sketch (click to select) - + (click to select) Sketch contains conflicting constraints - + Sketch contains conflicting constraints Sketch contains redundant constraints - + Sketch contains redundant constraints Over-constrained sketch @@ -2813,7 +2907,7 @@ Use the sketch validation tool. Create an arc of ellipse by its center, major radius, endpoints - + Create an arc of ellipse by its center, major radius, endpoints @@ -2831,7 +2925,7 @@ Use the sketch validation tool. Create a ellipse by periapsis, apoapsis, and minor radius - + Create a ellipse by periapsis, apoapsis, and minor radius @@ -2840,7 +2934,7 @@ Use the sketch validation tool. Create an ellipse by center, major radius and point - + Create an ellipse by center, major radius and point @@ -2849,7 +2943,7 @@ Use the sketch validation tool. Create a heptagon by its center and by one corner - + Create a heptagon by its center and by one corner @@ -2858,7 +2952,7 @@ Use the sketch validation tool. Create a hexagon by its center and by one corner - + Create a hexagon by its center and by one corner @@ -2867,7 +2961,7 @@ Use the sketch validation tool. Create an octagon by its center and by one corner - + Create an octagon by its center and by one corner @@ -2876,7 +2970,7 @@ Use the sketch validation tool. Create a pentagon by its center and by one corner - + Create a pentagon by its center and by one corner @@ -2885,7 +2979,7 @@ Use the sketch validation tool. Create a square by its center and by one corner - + Create a square by its center and by one corner @@ -2894,7 +2988,7 @@ Use the sketch validation tool. Create an equilateral triangle by its center and by one corner - + Create an equilateral triangle by its center and by one corner @@ -2966,7 +3060,7 @@ Do you want to detach it from the support? Sketcher tools - + Sketcher tools Sketcher geoms diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.qm index 376115637a..f7c6fea594 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts index eb508b1acf..2b04f097c1 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts @@ -11,12 +11,12 @@ Close Shape - + Close Shape Produce closed shape by Link end point of element with next elements' starting point - + Produce closed shape by Link end point of element with next elements' starting point @@ -34,17 +34,17 @@ Create an arc in the sketcher - Create an arc in the sketcher + Ívet hoz létre a vázlatkészítőben Center and end points - Center and end points + Közép és végpontok End points and rim point - End points and rim point + Végpontok és perem pont @@ -62,17 +62,17 @@ Create a circle in the sketcher - Create a circle in the sketcher + Kör létrehozása a vázlatkészítőben Center and rim point - Center and rim point + Közép- és a perem pont 3 rim points - 3 rim points + 3 perem pont @@ -85,27 +85,27 @@ Create a conic - + Create a conic Create a conic in the sketch - + Create a conic in the sketch Ellipse by center, major radius, point - + Ellipse by center, major radius, point Ellipse by Periapsis, apoapsis, minor radius - + Ellipse by Periapsis, apoapsis, minor radius Arc of ellipse by center, major radius, endpoints - + Arc of ellipse by center, major radius, endpoints @@ -118,42 +118,42 @@ Create regular polygon - + Create regular polygon Create an regular polygon in the sketcher - + Create an regular polygon in the sketcher Triangle - + Triangle Square - + Square Pentagon - + Pentagon Hexagon - + Hexagon Heptagon - + Heptagon Octagon - + Octagon @@ -166,12 +166,12 @@ Connect Edges - + Connect Edges Link end point of element with next elements' starting point - + Link end point of element with next elements' starting point @@ -318,12 +318,12 @@ Constrain InternalAlignment - + Constrain InternalAlignment Constrains an element to be aligned with the internal geometry of another element - + Constrains an element to be aligned with the internal geometry of another element @@ -377,7 +377,7 @@ Create a perpendicular constraint between two lines - Create a perpendicular constraint between two lines + Merőleges illesztést hoz létre két vonal közt Create a Perpendicular constraint between two lines @@ -430,12 +430,12 @@ Constrain refraction (Snell's law') - + Constrain refraction (Snell's law') Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. @@ -453,7 +453,7 @@ Create a symmetry constraint between two points with respect to a line or a third point - Create a symmetry constraint between two points with respect to a line or a third point + Egy szimmetria illesztést hoz létre két pont közt, egy vonal vagy egy harmadik pont figyelembe vételével Create an symmetry constraint between two points with respect to a line @@ -506,12 +506,12 @@ Create arc by three points - Create arc by three points + Ív létrehozása három ponttal Create an arc by its end points and a point along the arc - Create an arc by its end points and a point along the arc + Ívet hoz létre az ív végpontjaival és egy ív menti ponttal @@ -524,12 +524,12 @@ Create circle by three points - Create circle by three points + Kör létrehozása három ponttal Create a circle by 3 perimeter points - Create a circle by 3 perimeter points + Kör létrehozása 3 kerületi ponttal @@ -542,12 +542,12 @@ Create arc by center - Create arc by center + Ív létrehozása középpont kijelöléssel Create an arc by its center and by its end points - Create an arc by its center and by its end points + ívet hoz létre a középpontjával és a végpontokkal Create arc @@ -568,12 +568,12 @@ Create an arc of ellipse - + Create an arc of ellipse Create an arc of ellipse in the sketch - + Create an arc of ellipse in the sketch @@ -622,12 +622,12 @@ Create ellipse by 3 points - + Create ellipse by 3 points Create an ellipse by 3 points in the sketch - + Create an ellipse by 3 points in the sketch @@ -640,12 +640,12 @@ Create ellipse by center - + Create ellipse by center Create an ellipse by center in the sketch - + Create an ellipse by center in the sketch @@ -680,12 +680,12 @@ Create heptagon - + Create heptagon Create a heptagon in the sketch - + Create a heptagon in the sketch @@ -698,12 +698,12 @@ Create hexagon - + Create hexagon Create a hexagon in the sketch - + Create a hexagon in the sketch @@ -734,12 +734,12 @@ Create octagon - + Create octagon Create an octagon in the sketch - + Create an octagon in the sketch @@ -752,12 +752,12 @@ Create pentagon - + Create pentagon Create a pentagon in the sketch - + Create a pentagon in the sketch @@ -793,7 +793,7 @@ Create a polyline in the sketch. 'M' Key cycles behaviour - Create a polyline in the sketch. 'M' Key cycles behaviour + Vonallánc létrehozása a vázlatban. Az 'M' billentyűvel váltogathat a módok közt Create a polyline in the sketch @@ -828,12 +828,12 @@ Create slot - Create slot + Hozzon létre nyílást Create a slot in the sketch - Create a slot in the sketch + Hozzon létre egy nyílást a vázlatban @@ -846,12 +846,12 @@ Create square - + Create square Create a square in the sketch - + Create a square in the sketch @@ -882,12 +882,12 @@ Create equilateral triangle - + Create equilateral triangle Create an equilateral triangle in the sketch - + Create an equilateral triangle in the sketch @@ -905,7 +905,7 @@ Edit the selected sketch - + Edit the selected sketch @@ -973,7 +973,7 @@ Merge sketches - + Merge sketches @@ -983,7 +983,7 @@ Select at least two sketches, please. - + Select at least two sketches, please. @@ -1033,12 +1033,12 @@ Reorient sketch... - Reorient sketch... + Fordítsa el a vázlatot... Reorient the selected sketch - Reorient the selected sketch + Fordítsa el a kijelölt vázlatot @@ -1051,12 +1051,12 @@ Show/hide internal geometry - + Show/hide internal geometry Show all internal geometry / hide unused internal geometry - + Show all internal geometry / hide unused internal geometry @@ -1070,7 +1070,7 @@ Select Conflicting Constraints - + Select Conflicting Constraints @@ -1083,12 +1083,12 @@ Select Constraints - + Select Constraints Select the constraints associated to the selected elements - + Select the constraints associated to the selected elements @@ -1102,7 +1102,7 @@ Select Elements associated with constraints - + Select Elements associated with constraints @@ -1115,12 +1115,12 @@ Select Horizontal Axis - + Select Horizontal Axis Select the horizontal axis - + Select the horizontal axis @@ -1133,12 +1133,12 @@ Select Origin - + Select Origin Select the origin point - + Select the origin point @@ -1152,7 +1152,7 @@ Select Redundant Constraints - + Select Redundant Constraints @@ -1165,12 +1165,12 @@ Select Vertical Axis - + Select Vertical Axis Select the vertical axis - + Select the vertical axis @@ -1223,12 +1223,12 @@ Validate sketch... - Validate sketch... + Érvényesíti a vázlatot... Validate sketch - Validate sketch + Érvényesíti a vázlatot @@ -1238,7 +1238,7 @@ Select one sketch, please. - Select one sketch, please. + Kérjük válasszaon ki a egy vázlatot. @@ -1352,7 +1352,7 @@ - + Wrong selection Hibás kijelölés @@ -1387,7 +1387,7 @@ - + Impossible constraint Lehetetlen illesztés @@ -1458,29 +1458,29 @@ Cannot add a fixed x-coordinate constraint on an external geometry! - + Cannot add a fixed x-coordinate constraint on an external geometry! Cannot add a fixed x-coordinate constraint on the root point! - + Cannot add a fixed x-coordinate constraint on the root point! Cannot add a fixed y-coordinate constraint on an external geometry! - + Cannot add a fixed y-coordinate constraint on an external geometry! Cannot add a fixed y-coordinate constraint on the root point! - + Cannot add a fixed y-coordinate constraint on the root point! Select one or more arcs or circles from the sketch. - + Select one or more arcs or circles from the sketch. @@ -1490,88 +1490,88 @@ Do you want to share the same radius for all selected elements? - + Do you want to share the same radius for all selected elements? Select only entities from the sketch. - + Select only entities from the sketch. Select one or two lines from the sketch. Or select two edges and a point. - + Select one or two lines from the sketch. Or select two edges and a point. Parallel lines - + Parallel lines An angle constraint cannot be set for two parallel lines. - + An angle constraint cannot be set for two parallel lines. Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Selected objects are not just geometry from one sketch. - + Selected objects are not just geometry from one sketch. Number of selected objects is not 3 (is %1). - + Number of selected objects is not 3 (is %1). Incompatible geometry is selected! - + Incompatible geometry is selected! Select at least one ellipse and one edge from the sketch. - + Select at least one ellipse and one edge from the sketch. Sketch axes cannot be used in internal alignment constraint - + Sketch axes cannot be used in internal alignment constraint You can not internally constraint an ellipse on other ellipse. Select only one ellipse. - + You can not internally constraint an ellipse on other ellipse. Select only one ellipse. Maximum 2 points are supported. - + Maximum 2 points are supported. Maximum 2 lines are supported. - + Maximum 2 lines are supported. Nothing to constraint - + Nothing to constraint Currently all internal geometry of the ellipse is already exposed. - + Currently all internal geometry of the ellipse is already exposed. @@ -1579,39 +1579,39 @@ Extra elements - + Extra elements More elements than possible for the given ellipse were provided. These were ignored. - + More elements than possible for the given ellipse were provided. These were ignored. You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. - + You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Currently all internal geometry of the arc of ellipse is already exposed. - + Currently all internal geometry of the arc of ellipse is already exposed. More elements than possible for the given arc of ellipse were provided. These were ignored. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Select exactly two vertexes from the sketch. @@ -1621,7 +1621,7 @@ Select two or more vertexes from the sketch. - Select two or more vertexes from the sketch. + Jelöljön ki két vagy több csomópontok a vázlatból. @@ -1716,33 +1716,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. perpendicular constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. perpendicular constraint - + Select some geometry from the sketch. Wrong number of selected objects! perpendicular constraint - + Wrong number of selected objects! Error - + Hiba With 3 objects, there must be 2 curves and 1 point. tangent constraint - + With 3 objects, there must be 2 curves and 1 point. @@ -1773,19 +1775,21 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. tangent constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. tangent constraint - + Select some geometry from the sketch. Wrong number of selected objects! tangent constraint - + Wrong number of selected objects! @@ -1847,7 +1851,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. - Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. + Válasszon ki, két pontot és egy szimmetria vonalat, két pontot és egy szimmetria pontot vagy egy vonalat és egy szimmetria pontot a vázlatból. @@ -1898,7 +1902,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Válassza ki pontosan két egységet a vázlatból. - + Edit sketch Vázlat szerkesztése @@ -1970,39 +1974,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select at least two edges from the sketch. - + Select at least two edges from the sketch. One selected edge is not connectable - + One selected edge is not connectable Closing a shape formed by exactly two lines makes no sense. - + Closing a shape formed by exactly two lines makes no sense. Select elements from a single sketch. - + Select elements from a single sketch. No constraint selected - + No constraint selected At least one constraint must be selected - + At least one constraint must be selected - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. @@ -2060,7 +2064,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert angle - Insert angle + Szög beillesztése @@ -2072,26 +2076,26 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert radius - Insert radius + Sugár beillesztése Refractive index ratio Constraint_SnellsLaw - + Refractive index ratio Ratio n2/n1: Constraint_SnellsLaw - + Ratio n2/n1: Change radius - + Change radius @@ -2103,18 +2107,18 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio - + Refractive index ratio Ratio n2/n1: - + Ratio n2/n1: Insert length - Insert length + Hossz beillesztése @@ -2149,7 +2153,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unnamed - + Névtelen @@ -2200,18 +2204,18 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher colors - Sketcher colors + Vázlatkészítő színei Default edge color - Default edge color + Alapértelmezett él színe The color of edges being edited - The color of edges being edited + Az élek színei szerkesztve lesznek @@ -2222,17 +2226,17 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c The color of vertices being edited - The color of vertices being edited + A csúcspontok színei szerkesztve lesznek Edit edge color - Edit edge color + Élek színeinek szerkesztése Edit vertex color - Edit vertex color + Csúcsok színeinek szerkesztése @@ -2242,7 +2246,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c The color of construction geometry in edit mode - The color of construction geometry in edit mode + Az építési geometria színei szerkesztési módban @@ -2252,38 +2256,34 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c The color of external geometry in edit mode - The color of external geometry in edit mode + A külső geometria színei szerkesztési módban Fully constrained geometry - Fully constrained geometry + Teljesen kényszerezett geometria The color of fully constrained geometry in edit mode - The color of fully constrained geometry in edit mode + A teljesen kényszerített geometria szerkesztési módjának színei Constraint color - - - - Constrain color - Constrain color + Constraint color Datum color - Datum color + Dátum színe Datum text size - Datum text size + Dátum szöveg mérete @@ -2308,74 +2308,140 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Default line width - Default line width + Alapértelmezett vonalvastagság Cursor text color - Cursor text color + Kurzor szöveg színe Sketch editing - Sketch editing + Vázlat szerkesztése Font size - Font size + Betűméret Grid line pattern - Grid line pattern + Rács vonalminta Ask for value after creating a distance constraint - Ask for value after creating a distance constraint + Távolság megkötés létrehozása után kérjen értéket SketcherGui::SketcherValidation - + No missing coincidences - No missing coincidences + Nincsenek hiányzó egybeesések No missing coincidences found - No missing coincidences found + Nem található hiányzó egybeesés Missing coincidences - Missing coincidences + Hiányzó egybeesések %1 missing coincidences found - %1 missing coincidences found + %1 hiányzó egybeesést talált No invalid constraints - + No invalid constraints No invalid constraints found - + No invalid constraints found Invalid constraints - + Invalid constraints Invalid constraints found + Invalid constraints found + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. @@ -2427,47 +2493,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Type: - + Típus: Edge - + Él Starting Point - + Starting Point End Point - + End Point Center Point - + Center Point Extended Naming - + Extended Naming Auto-switch to Edge - + Auto-switch to Edge <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> - + <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> Elements - + Elements @@ -2475,7 +2541,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Point - + Pont @@ -2483,7 +2549,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - + Vonal @@ -2491,7 +2557,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc - + Ív @@ -2499,19 +2565,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Circle - + Kör Ellipse - + Ellipszis Elliptical Arc - + Elliptical Arc @@ -2519,7 +2585,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Other - + Other @@ -2532,17 +2598,13 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Show grid - Show grid + Rács megjelenítése Grid size: Rács méret: - - mm - mm - Grid snap @@ -2652,34 +2714,65 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher validation - Sketcher validation + Vázlatkészítő érvényesítés - + + Delete constraints to external geom. + + + + Missing coincidences - Missing coincidences + Hiányzó egybeesések Tolerance: Tolerance: + + + Reversed external geometry + + + + + Swap endpoints in constraints + + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + Find - Find + Keresés - - + + Fix - Fix + Javítás - + Invalid constraints - + Invalid constraints @@ -2687,13 +2780,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid sketch - + Invalid sketch The sketch is invalid and cannot be edited. Use the sketch validation tool. - + The sketch is invalid and cannot be edited. +Use the sketch validation tool. @@ -2723,24 +2817,24 @@ Use the sketch validation tool. Over-constrained sketch - + Over-constrained sketch (click to select) - + (click to select) Sketch contains conflicting constraints - + Sketch contains conflicting constraints Sketch contains redundant constraints - + Sketch contains redundant constraints Over-constrained sketch @@ -2786,7 +2880,7 @@ Use the sketch validation tool. Create an arc by its end points and a point along the arc - Create an arc by its end points and a point along the arc + Ívet hoz létre az ív végpontjaival és egy ív menti ponttal @@ -2795,7 +2889,7 @@ Use the sketch validation tool. Create a circle by 3 rim points - Create a circle by 3 rim points + Kört hoz létre 3 határoló ponttal @@ -2804,7 +2898,7 @@ Use the sketch validation tool. Create an arc by its center and by its end points - Create an arc by its center and by its end points + ívet hoz létre a középpontjával és a végpontokkal @@ -2813,7 +2907,7 @@ Use the sketch validation tool. Create an arc of ellipse by its center, major radius, endpoints - + Create an arc of ellipse by its center, major radius, endpoints @@ -2822,7 +2916,7 @@ Use the sketch validation tool. Create a circle by its center and by a rim point - Create a circle by its center and by a rim point + Kört hoz létre annak középpontjával és egy határoló ponttal @@ -2831,7 +2925,7 @@ Use the sketch validation tool. Create a ellipse by periapsis, apoapsis, and minor radius - + Create a ellipse by periapsis, apoapsis, and minor radius @@ -2840,7 +2934,7 @@ Use the sketch validation tool. Create an ellipse by center, major radius and point - + Create an ellipse by center, major radius and point @@ -2849,7 +2943,7 @@ Use the sketch validation tool. Create a heptagon by its center and by one corner - + Create a heptagon by its center and by one corner @@ -2858,7 +2952,7 @@ Use the sketch validation tool. Create a hexagon by its center and by one corner - + Create a hexagon by its center and by one corner @@ -2867,7 +2961,7 @@ Use the sketch validation tool. Create an octagon by its center and by one corner - + Create an octagon by its center and by one corner @@ -2876,7 +2970,7 @@ Use the sketch validation tool. Create a pentagon by its center and by one corner - + Create a pentagon by its center and by one corner @@ -2885,7 +2979,7 @@ Use the sketch validation tool. Create a square by its center and by one corner - + Create a square by its center and by one corner @@ -2894,7 +2988,7 @@ Use the sketch validation tool. Create an equilateral triangle by its center and by one corner - + Create an equilateral triangle by its center and by one corner @@ -2902,14 +2996,14 @@ Use the sketch validation tool. Sketch has support - Sketch has support + Vázlat támogatással Sketch with a support face cannot be reoriented. Do you want to detach it from the support? - Sketch with a support face cannot be reoriented. -Do you want to detach it from the support? + Támogatási felülettel rendelkező vázlat nézetét nem lehet átállítani. +Le akarja választani a támogatási felületről? @@ -2966,7 +3060,7 @@ Do you want to detach it from the support? Sketcher tools - + Sketcher tools Sketcher geoms diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm index c4affb56b7..629807a2a8 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts index d668b42a1d..b9e53cbaad 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts @@ -11,12 +11,12 @@ Close Shape - + Chiudere la forma Produce closed shape by Link end point of element with next elements' starting point - + Produce una forma chiusa collegando il punto finale dell'elemento con il punto iniziale degli elementi successivi @@ -85,27 +85,27 @@ Create a conic - + Crea una sezione conica Create a conic in the sketch - + Crea una sezione conica nello schizzo Ellipse by center, major radius, point - + Ellisse da centro, raggio maggiore, punto Ellipse by Periapsis, apoapsis, minor radius - + Ellisse da periasse, apoasse, raggio minore Arc of ellipse by center, major radius, endpoints - + Arco di ellisse da centro, raggio principale, punti finali @@ -118,42 +118,42 @@ Create regular polygon - + Creare un poligono regolare Create an regular polygon in the sketcher - + Creare un poligono regolare nell'ambiente sketcher Triangle - + Triangolo Square - + Quadrato Pentagon - + Pentagono Hexagon - + Esagono Heptagon - + Ettagono Octagon - + Ottagono @@ -166,12 +166,12 @@ Connect Edges - + Collegare i bordi Link end point of element with next elements' starting point - + Collegare il punto finale dell'elemento con il punto iniziale dell' elemento successivo @@ -318,12 +318,12 @@ Constrain InternalAlignment - + Vincolare Allineamento interno Constrains an element to be aligned with the internal geometry of another element - + Vincola un elemento a stare allineato con la geometria interna di un altro elemento @@ -430,12 +430,12 @@ Constrain refraction (Snell's law') - + Vincolo rifrazione (legge di Snell') Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - + Crea un vincolo di rifrazione (legge di Snell) tra due punti finali di raggi e con un bordo come interfaccia. @@ -568,12 +568,12 @@ Create an arc of ellipse - + Crea un arco di ellisse Create an arc of ellipse in the sketch - + Crea un arco di ellisse nello schizzo @@ -622,12 +622,12 @@ Create ellipse by 3 points - + Crea ellisse da 3 punti Create an ellipse by 3 points in the sketch - + Crea nello schizzo un'ellisse da 3 punti @@ -640,12 +640,12 @@ Create ellipse by center - + Crea ellisse dal centro Create an ellipse by center in the sketch - + Crea nello schizzo un'ellisse dal suo centro @@ -680,12 +680,12 @@ Create heptagon - + Crea ettagono Create a heptagon in the sketch - + Crea un ettagono nello schizzo @@ -698,12 +698,12 @@ Create hexagon - + Crea esagono Create a hexagon in the sketch - + Crea un esagono nello schizzo @@ -734,12 +734,12 @@ Create octagon - + Crea ottagono Create an octagon in the sketch - + Crea un ottagono nello schizzo @@ -752,12 +752,12 @@ Create pentagon - + Crea pentagono Create a pentagon in the sketch - + Crea un pentagono nello schizzo @@ -828,12 +828,12 @@ Create slot - Crea scanalatura + Crea asola Create a slot in the sketch - Creare una scanalatura nello sketch + Creare un'asola nello sketch @@ -846,12 +846,12 @@ Create square - + Crea quadrato Create a square in the sketch - + Crea un quadrato nello schizzo @@ -882,12 +882,12 @@ Create equilateral triangle - + Crea triangolo equilatero Create an equilateral triangle in the sketch - + Crea un triangolo equilatero nello schizzo @@ -905,7 +905,7 @@ Edit the selected sketch - + Modifica lo schizzo selezionato @@ -973,7 +973,7 @@ Merge sketches - + Unisci schizzi @@ -983,7 +983,7 @@ Select at least two sketches, please. - + Selezionare almeno due schizzi, per favore. @@ -1051,12 +1051,12 @@ Show/hide internal geometry - + Mostra/Nascondi la geometria interna Show all internal geometry / hide unused internal geometry - + Mostra tutta la geometria interna / Nascondi la geometria interna inutilizzata @@ -1070,7 +1070,7 @@ Select Conflicting Constraints - + Selezionare i vincoli in conflitto @@ -1083,12 +1083,12 @@ Select Constraints - + Selezionare i vincoli Select the constraints associated to the selected elements - + Seleziona i vincoli associati agli elementi selezionati @@ -1102,7 +1102,7 @@ Select Elements associated with constraints - + Seleziona gli elementi associati ai vincoli @@ -1115,12 +1115,12 @@ Select Horizontal Axis - + Seleziona l'asse orizzontale Select the horizontal axis - + Seleziona l'asse orizzontale @@ -1133,12 +1133,12 @@ Select Origin - + Seleziona l'origine Select the origin point - + Seleziona il punto di origine @@ -1152,7 +1152,7 @@ Select Redundant Constraints - + Seleziona i vincoli ridondanti @@ -1165,12 +1165,12 @@ Select Vertical Axis - + Seleziona l'asse verticale Select the vertical axis - + Seleziona l'asse verticale @@ -1223,7 +1223,7 @@ Validate sketch... - Convalidare lo sketch... + Convalida lo schizzo... @@ -1251,7 +1251,7 @@ View sketch - Visualizza lo sketch + Vista normale allo schizzo @@ -1352,7 +1352,7 @@ - + Wrong selection Selezione errata @@ -1387,7 +1387,7 @@ - + Impossible constraint Vincolo Impossible @@ -1458,29 +1458,29 @@ Cannot add a fixed x-coordinate constraint on an external geometry! - + Non è possibile aggiungere un vincolo di coordinata x su una geometria esterna! Cannot add a fixed x-coordinate constraint on the root point! - + Non è possibile aggiungere un vincolo di coordinata x nel punto di origine! Cannot add a fixed y-coordinate constraint on an external geometry! - + Non è possibile aggiungere un vincolo di coordinata y su una geometria esterna! Cannot add a fixed y-coordinate constraint on the root point! - + Non è possibile aggiungere un vincolo di coordinata y nel punto di origine! Select one or more arcs or circles from the sketch. - + Seleziona uno o più archi o cerchi nello schizzo. @@ -1490,88 +1490,88 @@ Do you want to share the same radius for all selected elements? - + Si desidera condividere lo stesso raggio per tutti gli elementi selezionati? Select only entities from the sketch. - + Seleziona solo le entità di schizzo. Select one or two lines from the sketch. Or select two edges and a point. - + Seleziona una o due linee di schizzo. O seleziona due spigoli e un punto. Parallel lines - + Linee parallele An angle constraint cannot be set for two parallel lines. - + Un vincolo di angolo non può essere impostato su due linee parallele. Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Selezionare i due punti finali delle linee da usare come raggi e un bordo che rappresenta il limite. Il primo punto selezionato corrisponde all'indice n1, il secondo a n2 e il valore è definito dal rapporto n2/n1. Selected objects are not just geometry from one sketch. - + Gli oggetti selezionati non sono delle geometrie dello stesso schizzo. Number of selected objects is not 3 (is %1). - + Il numero di oggetti selezionati non è 3 (è %1). Incompatible geometry is selected! - + Sono selezionate delle geometrie incompatibili! Select at least one ellipse and one edge from the sketch. - + Selezionare almeno un'ellisse e un bordo dello schizzo. Sketch axes cannot be used in internal alignment constraint - + Gli assi dello schizzo non possono essere utilizzati nel vincolo di allineamento interno You can not internally constraint an ellipse on other ellipse. Select only one ellipse. - + Non è possibile applicare il vincolo allineamento interno di un'ellisse su un'altra ellisse. Selezionare una sola ellisse. Maximum 2 points are supported. - + Sono supportati al massimo 2 punti. Maximum 2 lines are supported. - + Sono supportate al massimo 2 linee. Nothing to constraint - + Nulla da vincolare Currently all internal geometry of the ellipse is already exposed. - + Attualmente tutta la geometria interna dell'ellisse è già esposta. @@ -1579,39 +1579,39 @@ Extra elements - + Elementi aggiuntivi More elements than possible for the given ellipse were provided. These were ignored. - + Per l'ellisse sono stati forniti più elementi di quanti sono possibili. Questi sono stati ignorati. You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. - + Non è possibile applicare il vincolo allineamento interno di un arco di ellisse su altri archi di ellisse. Selezionare un solo arco di ellisse. You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Non è possibile applicare il vincolo allineamento interno di un ellisse su un arco di ellisse. Selezionare un solo ellisse o un solo arco di ellisse. Currently all internal geometry of the arc of ellipse is already exposed. - + Attualmente tutta la geometria interna dell'arco di ellisse è già esposta. More elements than possible for the given arc of ellipse were provided. These were ignored. - + Per l'arco di ellisse sono stati forniti più elementi di quanti sono possibili. Questi sono stati ignorati. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Attualmente la geometria interna è supportata solo per ellisse e arco di ellisse. L'ultimo elemento selezionato deve essere un ellisse o un arco di ellisse. Select exactly two vertexes from the sketch. @@ -1716,33 +1716,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. perpendicular constraint - + Questo vincolo può essere applicato in determinati modi. + +Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; due curve e un punto. Select some geometry from the sketch. perpendicular constraint - + Selezionare alcune geometrie dello schizzo. Wrong number of selected objects! perpendicular constraint - + Numero di oggetti selezionati errato! Error - + Errore With 3 objects, there must be 2 curves and 1 point. tangent constraint - + Con 3 oggetti, ci devono essere 2 curve e 1 punto. @@ -1773,19 +1775,21 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. tangent constraint - + Questo vincolo può essere applicato in determinati modi. + +Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; due curve e un punto. Select some geometry from the sketch. tangent constraint - + Selezionare alcune geometrie dello schizzo. Wrong number of selected objects! tangent constraint - + Numero di oggetti selezionati errato! @@ -1898,7 +1902,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Seleziona esattamente due entità dello sketch. - + Edit sketch Modifica sketch @@ -1970,39 +1974,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select at least two edges from the sketch. - + Selezionare almeno due spigoli nello schizzo. One selected edge is not connectable - + Uno spigolo selezionato non è collegabile Closing a shape formed by exactly two lines makes no sense. - + Chiudere una forma costituita solo da due linee non ha senso. Select elements from a single sketch. - + Selezionare gli elementi da un solo schizzo. No constraint selected - + Nessun vincolo selezionato At least one constraint must be selected - + È necessario selezionare almeno un vincolo - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Attualmente la geometria interna è supportata solo per ellisse e arco di ellisse. L'ultimo elemento selezionato deve essere un ellisse o un arco di ellisse. @@ -2079,19 +2083,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio Constraint_SnellsLaw - + Indice di rifrazione Ratio n2/n1: Constraint_SnellsLaw - + Rapporto n2/n1: Change radius - + Cambia il raggio @@ -2103,12 +2107,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio - + Indice di rifrazione Ratio n2/n1: - + Rapporto n2/n1: @@ -2149,7 +2153,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unnamed - + Senza nome @@ -2269,11 +2273,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Constraint color - - - - Constrain color - Il colore del vincolo + Colore dei vincoli @@ -2339,7 +2339,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::SketcherValidation - + No missing coincidences Nessuna coincidenza mancante @@ -2361,21 +2361,87 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c No invalid constraints - + Nessun vincolo non valido No invalid constraints found - + Non è stato trovato nessun vincolo non valido Invalid constraints - + Vincoli non validi Invalid constraints found + Trovati dei vincoli non validi + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. @@ -2427,47 +2493,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Type: - + Tipo: Edge - + Spigolo Starting Point - + Punto di partenza End Point - + Punto finale Center Point - + Punto centrale Extended Naming - + Denominazione estesa Auto-switch to Edge - + Commuta automaticamente su Bordo <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> - + <html><head/><body><p>&quot;Ctrl&quot;: selezione multipla</p><p>&quot;Z&quot;: passare al successivo tipo valido</p></body></html> Elements - + Elementi @@ -2475,7 +2541,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Point - + Punto @@ -2483,7 +2549,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - + Linea @@ -2491,7 +2557,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc - + Arco @@ -2499,19 +2565,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Circle - + Cerchio Ellipse - + Ellisse Elliptical Arc - + Arco ellittico @@ -2519,7 +2585,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Other - + Altro @@ -2532,17 +2598,13 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Show grid - Visualizza griglia + Visualizza la griglia Grid size: Dimensione della griglia: - - mm - mm - Grid snap @@ -2655,7 +2717,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Convalida dello Sketcher - + + Delete constraints to external geom. + + + + Missing coincidences Coincidenze mancanti @@ -2664,22 +2731,48 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Tolerance: Tolleranza: + + + Reversed external geometry + + + + + Swap endpoints in constraints + + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + Find Trova - - + + Fix Ripara - + Invalid constraints - + Vincoli non validi @@ -2687,13 +2780,13 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid sketch - + Schizzo non valido The sketch is invalid and cannot be edited. Use the sketch validation tool. - + Lo schizzo non è valido e non può essere modificato. Utilizzare lo strumento di convalida di schizzo. @@ -2723,24 +2816,24 @@ Use the sketch validation tool. Over-constrained sketch - + Schizzo sovravincolato (click to select) - + (fare clic per selezionare) Sketch contains conflicting constraints - + Lo schizzo contiene dei vincoli in conflitto Sketch contains redundant constraints - + Lo schizzo contiene dei vincoli ridondanti Over-constrained sketch @@ -2762,12 +2855,12 @@ Use the sketch validation tool. Under-constrained sketch with 1 degree of freedom - Sketch sottovincolato con 1 grado di libertà + Schizzo sottovincolato con 1 grado di libertà Under-constrained sketch with %1 degrees of freedom - Sketch sottovincolato con %1 gradi di libertà + Schizzo sottovincolato con %1 gradi di libertà @@ -2813,7 +2906,7 @@ Use the sketch validation tool. Create an arc of ellipse by its center, major radius, endpoints - + Crea un arco di ellisse dal suo centro, raggio principale, punti finali @@ -2831,7 +2924,7 @@ Use the sketch validation tool. Create a ellipse by periapsis, apoapsis, and minor radius - + Crea un ellisse da periasse, apoasse e raggio minore @@ -2840,7 +2933,7 @@ Use the sketch validation tool. Create an ellipse by center, major radius and point - + Crea un'ellisse da centro, raggio maggiore e punto @@ -2849,7 +2942,7 @@ Use the sketch validation tool. Create a heptagon by its center and by one corner - + Crea un ettagono dal suo centro e un vertice @@ -2858,7 +2951,7 @@ Use the sketch validation tool. Create a hexagon by its center and by one corner - + Crea un esagono dal suo centro e un vertice @@ -2867,7 +2960,7 @@ Use the sketch validation tool. Create an octagon by its center and by one corner - + Crea un ottagono dal suo centro e un vertice @@ -2876,7 +2969,7 @@ Use the sketch validation tool. Create a pentagon by its center and by one corner - + Crea un pentagono dal suo centro e un vertice @@ -2885,7 +2978,7 @@ Use the sketch validation tool. Create a square by its center and by one corner - + Crea un quadrato dal suo centro e un vertice @@ -2894,7 +2987,7 @@ Use the sketch validation tool. Create an equilateral triangle by its center and by one corner - + Crea un triangolo equilatero da centro e un vertice @@ -2965,7 +3058,7 @@ Do you want to detach it from the support? Sketcher tools - + Strumenti dello Sketcher Sketcher geoms diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.qm index 45dc93086b..37728c192c 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts index b9d2898c7b..adbd3ec35c 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts @@ -11,12 +11,12 @@ Close Shape - + Close Shape Produce closed shape by Link end point of element with next elements' starting point - + Produce closed shape by Link end point of element with next elements' starting point @@ -34,17 +34,17 @@ Create an arc in the sketcher - スケッチに弧を作成する + スケッチに円弧を作成 Center and end points - 中心点と端点から弧を作る + 中心点と端点から円弧を作成 End points and rim point - 端点と円周上の点から作る + 端点と円周上の点から作成 @@ -62,7 +62,7 @@ Create a circle in the sketcher - スケッチに円を作成します + スケッチに円を作成 @@ -72,8 +72,7 @@ 3 rim points - 3点円を作成 - + 3点を指定して円を作成 @@ -86,27 +85,27 @@ Create a conic - + 円錐曲線を作成 Create a conic in the sketch - + スケッチに円錐曲線を作成します Ellipse by center, major radius, point - + 中心、主半径、点からなる楕円 Ellipse by Periapsis, apoapsis, minor radius - + Ellipse by Periapsis, apoapsis, minor radius Arc of ellipse by center, major radius, endpoints - + 中心点、主半径、端点からなる楕円の円弧 @@ -119,42 +118,42 @@ Create regular polygon - + 正多角形を作成 Create an regular polygon in the sketcher - + スケッチャーで、正多角形を作成します。 Triangle - + 三角形 Square - + 方形 Pentagon - + 五角形 Hexagon - + 六角形 Heptagon - + 七角形 Octagon - + 八角形 @@ -167,12 +166,12 @@ Connect Edges - + エッジを接続 Link end point of element with next elements' starting point - + Link end point of element with next elements' starting point @@ -190,7 +189,7 @@ Fix the angle of a line or the angle between two lines - 直線の角度または2直線間の角度を拘束する + 直線の角度または2直線間の角度を拘束 @@ -203,7 +202,7 @@ Constrain coincident - 同時拘束 + 一致拘束 @@ -221,12 +220,12 @@ Constrain distance - 変位拘束 + 距離拘束 Fix a length of a line or the distance between a line and a vertex - 直線の長さまたは直線と節点の間の距離を固定 + 直線の長さまたは直線と節点の間の距離を拘束 @@ -248,7 +247,7 @@ Fix the horizontal distance between two points or line ends - 2点間または直線端点間の水平距離を固定 + 2点間または直線端点間の水平距離を拘束 @@ -270,7 +269,7 @@ Fix the vertical distance between two points or line ends - 2点間または直線端点間の垂直距離を固定 + 2点間または直線端点間の垂直距離を拘束 @@ -319,12 +318,12 @@ Constrain InternalAlignment - + Constrain InternalAlignment Constrains an element to be aligned with the internal geometry of another element - + Constrains an element to be aligned with the internal geometry of another element @@ -400,7 +399,7 @@ Fix a point onto an object - 点をオブジェクト上に固定 + 点をオブジェクト上に拘束 @@ -431,12 +430,12 @@ Constrain refraction (Snell's law') - + 屈折率（スネルの法則）を拘束 Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. @@ -507,12 +506,12 @@ Create arc by three points - 3点からなる円弧を作成します。 + 3点を指定して円弧を作成 Create an arc by its end points and a point along the arc - Create an arc by its end points and a point along the arc + 終点と円弧に上の点から円弧を作成 @@ -525,7 +524,7 @@ Create circle by three points - 3点円を作成します。 + 3点を指定して円を作成 @@ -548,7 +547,7 @@ Create an arc by its center and by its end points - Create an arc by its center and by its end points + 中心と終点から円弧を作成 Create arc @@ -569,12 +568,12 @@ Create an arc of ellipse - + 楕円弧を作成します。 Create an arc of ellipse in the sketch - + Create an arc of ellipse in the sketch @@ -610,7 +609,7 @@ Create a draft line in the sketch - スケッチ上にドラフトラインを作成します + スケッチ上にドラフトラインを作成 @@ -623,12 +622,12 @@ Create ellipse by 3 points - + 3 点からなる楕円を作成 Create an ellipse by 3 points in the sketch - + スケッチに３点からなる楕円を作成します。 @@ -641,12 +640,12 @@ Create ellipse by center - + 中心点による楕円を作成します。 Create an ellipse by center in the sketch - + スケッチに中心点による楕円を作成します。 @@ -681,12 +680,12 @@ Create heptagon - + 七角形を作成 Create a heptagon in the sketch - + スケッチに七角形を作成します。 @@ -699,12 +698,12 @@ Create hexagon - + 六角形を作成 Create a hexagon in the sketch - + スケッチに六角形を作成します。 @@ -735,12 +734,12 @@ Create octagon - + 八角形を作成 Create an octagon in the sketch - + スケッチに八角形を作成します。 @@ -753,12 +752,12 @@ Create pentagon - + 五角形を作成 Create a pentagon in the sketch - + スケッチに五角形を作成します。 @@ -829,12 +828,12 @@ Create slot - 長丸を作成 + 長円を作成 Create a slot in the sketch - スケッチに長丸を作成する + スケッチに長円を作成する @@ -847,12 +846,12 @@ Create square - + 正方形を作成 Create a square in the sketch - + スケッチに正方形を作成します @@ -883,12 +882,12 @@ Create equilateral triangle - + 正三角形を作成 Create an equilateral triangle in the sketch - + スケッチに正三角形を作成します。 @@ -906,7 +905,7 @@ Edit the selected sketch - + 選択したスケッチを編集します。 @@ -974,7 +973,7 @@ Merge sketches - + スケッチをマージ @@ -984,7 +983,7 @@ Select at least two sketches, please. - + Select at least two sketches, please. @@ -1034,12 +1033,12 @@ Reorient sketch... - Reorient sketch... + スケッチの向きを変更... Reorient the selected sketch - Reorient the selected sketch + 選択したスケッチの向きを変更 @@ -1052,12 +1051,12 @@ Show/hide internal geometry - + 内部ジオメトリの表示/非表示 Show all internal geometry / hide unused internal geometry - + Show all internal geometry / hide unused internal geometry @@ -1071,7 +1070,7 @@ Select Conflicting Constraints - + 競合している拘束を選択します @@ -1084,12 +1083,12 @@ Select Constraints - + 拘束を選択 Select the constraints associated to the selected elements - + Select the constraints associated to the selected elements @@ -1103,7 +1102,7 @@ Select Elements associated with constraints - + Select Elements associated with constraints @@ -1116,12 +1115,12 @@ Select Horizontal Axis - + 水平軸を選択 Select the horizontal axis - + 水平軸を選択します @@ -1134,12 +1133,12 @@ Select Origin - + Select Origin Select the origin point - + Select the origin point @@ -1153,7 +1152,7 @@ Select Redundant Constraints - + Select Redundant Constraints @@ -1166,12 +1165,12 @@ Select Vertical Axis - + 垂直軸を選択 Select the vertical axis - + 垂直軸を選択します @@ -1229,7 +1228,7 @@ Validate sketch - Validate sketch + スケッチを検証 @@ -1239,7 +1238,7 @@ Select one sketch, please. - Select one sketch, please. + スケッチを1つ選択してください @@ -1353,7 +1352,7 @@ - + Wrong selection 誤った選択 @@ -1388,7 +1387,7 @@ - + Impossible constraint 拘束不可 @@ -1459,29 +1458,29 @@ Cannot add a fixed x-coordinate constraint on an external geometry! - + Cannot add a fixed x-coordinate constraint on an external geometry! Cannot add a fixed x-coordinate constraint on the root point! - + Cannot add a fixed x-coordinate constraint on the root point! Cannot add a fixed y-coordinate constraint on an external geometry! - + Cannot add a fixed y-coordinate constraint on an external geometry! Cannot add a fixed y-coordinate constraint on the root point! - + Cannot add a fixed y-coordinate constraint on the root point! Select one or more arcs or circles from the sketch. - + Select one or more arcs or circles from the sketch. @@ -1491,88 +1490,88 @@ Do you want to share the same radius for all selected elements? - + Do you want to share the same radius for all selected elements? Select only entities from the sketch. - + Select only entities from the sketch. Select one or two lines from the sketch. Or select two edges and a point. - + Select one or two lines from the sketch. Or select two edges and a point. Parallel lines - + 平行線 An angle constraint cannot be set for two parallel lines. - + An angle constraint cannot be set for two parallel lines. Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Selected objects are not just geometry from one sketch. - + Selected objects are not just geometry from one sketch. Number of selected objects is not 3 (is %1). - + 選択したオブジェクトの数が 3 ではなく（%1 です）。 Incompatible geometry is selected! - + Incompatible geometry is selected! Select at least one ellipse and one edge from the sketch. - + Select at least one ellipse and one edge from the sketch. Sketch axes cannot be used in internal alignment constraint - + Sketch axes cannot be used in internal alignment constraint You can not internally constraint an ellipse on other ellipse. Select only one ellipse. - + You can not internally constraint an ellipse on other ellipse. Select only one ellipse. Maximum 2 points are supported. - + Maximum 2 points are supported. Maximum 2 lines are supported. - + Maximum 2 lines are supported. Nothing to constraint - + Nothing to constraint Currently all internal geometry of the ellipse is already exposed. - + Currently all internal geometry of the ellipse is already exposed. @@ -1580,39 +1579,39 @@ Extra elements - + Extra elements More elements than possible for the given ellipse were provided. These were ignored. - + More elements than possible for the given ellipse were provided. These were ignored. You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. - + You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Currently all internal geometry of the arc of ellipse is already exposed. - + Currently all internal geometry of the arc of ellipse is already exposed. More elements than possible for the given arc of ellipse were provided. These were ignored. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Select exactly two vertexes from the sketch. @@ -1622,7 +1621,7 @@ Select two or more vertexes from the sketch. - Select two or more vertexes from the sketch. + スケッチから2点以上の頂点を選択してください @@ -1717,33 +1716,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. perpendicular constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. perpendicular constraint - + Select some geometry from the sketch. Wrong number of selected objects! perpendicular constraint - + 選択したオブジェクトの数が正しくありません ！ Error - + エラー With 3 objects, there must be 2 curves and 1 point. tangent constraint - + With 3 objects, there must be 2 curves and 1 point. @@ -1774,19 +1775,21 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. tangent constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. tangent constraint - + Select some geometry from the sketch. Wrong number of selected objects! tangent constraint - + 選択したオブジェクトの数が正しくありません ！ @@ -1848,7 +1851,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. - Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. + 2つの点と対称線、2つの点と対称点、あるいは1本の直線と対称点をスケッチから選択してください。 @@ -1899,7 +1902,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c スケッチから2エンティティだけ選択します - + Edit sketch スケッチを編集 @@ -1971,39 +1974,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select at least two edges from the sketch. - + スケッチから2本以上の直線を選択してください One selected edge is not connectable - + One selected edge is not connectable Closing a shape formed by exactly two lines makes no sense. - + Closing a shape formed by exactly two lines makes no sense. Select elements from a single sketch. - + Select elements from a single sketch. No constraint selected - + No constraint selected At least one constraint must be selected - + At least one constraint must be selected - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. @@ -2061,7 +2064,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert angle - Insert angle + 角度を挿入 @@ -2073,26 +2076,26 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert radius - Insert radius + 半径を挿入 Refractive index ratio Constraint_SnellsLaw - + Refractive index ratio Ratio n2/n1: Constraint_SnellsLaw - + Ratio n2/n1: Change radius - + Change radius @@ -2104,18 +2107,18 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio - + Refractive index ratio Ratio n2/n1: - + Ratio n2/n1: Insert length - Insert length + 長さを挿入 @@ -2137,7 +2140,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert datum - データムを挿入 + データを挿入 @@ -2150,7 +2153,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unnamed - + MeishoMisette @@ -2206,13 +2209,13 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Default edge color - Default edge color + デフォルトのエッジの色 The color of edges being edited - The color of edges being edited + 編集中のエッジの色 @@ -2223,7 +2226,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c The color of vertices being edited - The color of vertices being edited + 編集中の頂点の色 @@ -2243,7 +2246,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c The color of construction geometry in edit mode - The color of construction geometry in edit mode + 編集モードでの補助図形の色 @@ -2270,11 +2273,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Constraint color - - - - Constrain color - 幾何拘束されている時の色 + 幾何拘束の色 @@ -2309,12 +2308,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Default line width - Default line width + 既定の線幅 Cursor text color - Cursor text color + カーソルテキストの色 @@ -2334,49 +2333,115 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Ask for value after creating a distance constraint - Ask for value after creating a distance constraint + 距離拘束を作成した後、値を入力してください SketcherGui::SketcherValidation - + No missing coincidences - No missing coincidences + 失われた一致点はありません No missing coincidences found - No missing coincidences found + 失われた一致点は見つかりませんでした Missing coincidences - Missing coincidences + 失われた一致点 %1 missing coincidences found - %1 missing coincidences found + %1 個の失われた一致点が見つかりました No invalid constraints - + 無効な拘束はありません No invalid constraints found - + 無効な拘束は見つかりません Invalid constraints - + 拘束が無効です Invalid constraints found + 無効な拘束が見つかりました + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. @@ -2400,7 +2465,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Normal - 法線 + 標準 @@ -2428,47 +2493,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Type: - + タイプ: Edge - + エッジ Starting Point - + Starting Point End Point - + 端点 Center Point - + 中心点 Extended Naming - + 名前付けの拡張 Auto-switch to Edge - + Auto-switch to Edge <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> - + <html><head/><body><p>&quot;Ctrl&quot;: 複数を選択</p><p>&quot;Z&quot;: 次の妥当な型に切り替える</p></body></html> Elements - + Elements @@ -2476,7 +2541,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Point - + 点 @@ -2484,7 +2549,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - + 直線 @@ -2492,7 +2557,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc - + 円弧 @@ -2500,19 +2565,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Circle - + 円 Ellipse - + 楕円 Elliptical Arc - + 楕円弧 @@ -2520,7 +2585,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Other - + その他 @@ -2540,10 +2605,6 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Grid size: グリッドサイズ: - - mm - mm - Grid snap @@ -2653,34 +2714,65 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher validation - Sketcher validation + スケッチャーを検証 - + + Delete constraints to external geom. + + + + Missing coincidences - Missing coincidences + 失われた一致点 Tolerance: - Tolerance: + 許容範囲: + + + + Reversed external geometry + + + + + Swap endpoints in constraints + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + Find - Find + 検査 - - + + Fix - Fix + 修正 - + Invalid constraints - + 拘束が無効です @@ -2688,13 +2780,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid sketch - + スケッチが無効です The sketch is invalid and cannot be edited. Use the sketch validation tool. - + The sketch is invalid and cannot be edited. +Use the sketch validation tool. @@ -2724,24 +2817,24 @@ Use the sketch validation tool. Over-constrained sketch - + Over-constrained sketch (click to select) - + （クリックすると選択） Sketch contains conflicting constraints - + Sketch contains conflicting constraints Sketch contains redundant constraints - + Sketch contains redundant constraints Over-constrained sketch @@ -2787,7 +2880,7 @@ Use the sketch validation tool. Create an arc by its end points and a point along the arc - Create an arc by its end points and a point along the arc + 終点と円弧に上の点から円弧を作成 @@ -2796,7 +2889,7 @@ Use the sketch validation tool. Create a circle by 3 rim points - Create a circle by 3 rim points + 円周上の3点から円を作成 @@ -2805,7 +2898,7 @@ Use the sketch validation tool. Create an arc by its center and by its end points - Create an arc by its center and by its end points + 中心と終点から円弧を作成 @@ -2814,7 +2907,7 @@ Use the sketch validation tool. Create an arc of ellipse by its center, major radius, endpoints - + Create an arc of ellipse by its center, major radius, endpoints @@ -2823,7 +2916,7 @@ Use the sketch validation tool. Create a circle by its center and by a rim point - Create a circle by its center and by a rim point + 中心と円周上の点から円を作成 @@ -2832,7 +2925,7 @@ Use the sketch validation tool. Create a ellipse by periapsis, apoapsis, and minor radius - + Create a ellipse by periapsis, apoapsis, and minor radius @@ -2841,7 +2934,7 @@ Use the sketch validation tool. Create an ellipse by center, major radius and point - + Create an ellipse by center, major radius and point @@ -2850,7 +2943,7 @@ Use the sketch validation tool. Create a heptagon by its center and by one corner - + Create a heptagon by its center and by one corner @@ -2859,7 +2952,7 @@ Use the sketch validation tool. Create a hexagon by its center and by one corner - + Create a hexagon by its center and by one corner @@ -2868,7 +2961,7 @@ Use the sketch validation tool. Create an octagon by its center and by one corner - + Create an octagon by its center and by one corner @@ -2877,7 +2970,7 @@ Use the sketch validation tool. Create a pentagon by its center and by one corner - + Create a pentagon by its center and by one corner @@ -2886,7 +2979,7 @@ Use the sketch validation tool. Create a square by its center and by one corner - + Create a square by its center and by one corner @@ -2895,7 +2988,7 @@ Use the sketch validation tool. Create an equilateral triangle by its center and by one corner - + 外接円の中心点と一つの頂点からなる正三角形を作成します。 @@ -2903,14 +2996,13 @@ Use the sketch validation tool. Sketch has support - Sketch has support + スケッチには支持オブジェクトが設定されています Sketch with a support face cannot be reoriented. Do you want to detach it from the support? - Sketch with a support face cannot be reoriented. -Do you want to detach it from the support? + 支持面が設定されているスケッチの向きを変えることはできません。スケッチと支持面を切り離しますか？ @@ -2967,7 +3059,7 @@ Do you want to detach it from the support? Sketcher tools - + Sketcher tools Sketcher geoms diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.qm index 5a1d1cffcb..adee509048 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts index c99c34a4bb..de677dc87a 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts @@ -11,12 +11,12 @@ Close Shape - + Close Shape Produce closed shape by Link end point of element with next elements' starting point - + Produce closed shape by Link end point of element with next elements' starting point @@ -39,7 +39,7 @@ Center and end points - Center and end points + Middelpunt en eindpunten @@ -62,7 +62,7 @@ Create a circle in the sketcher - Create a circle in the sketcher + Maak een cirkel in de schetser @@ -85,27 +85,27 @@ Create a conic - + Create a conic Create a conic in the sketch - + Create a conic in the sketch Ellipse by center, major radius, point - + Ellipse by center, major radius, point Ellipse by Periapsis, apoapsis, minor radius - + Ellipse by Periapsis, apoapsis, minor radius Arc of ellipse by center, major radius, endpoints - + Arc of ellipse by center, major radius, endpoints @@ -118,42 +118,42 @@ Create regular polygon - + Create regular polygon Create an regular polygon in the sketcher - + Create an regular polygon in the sketcher Triangle - + Triangle Square - + Square Pentagon - + Vijfhoek Hexagon - + Zeshoek Heptagon - + Heptagon Octagon - + Octagon @@ -166,12 +166,12 @@ Connect Edges - + Connect Edges Link end point of element with next elements' starting point - + Link end point of element with next elements' starting point @@ -318,12 +318,12 @@ Constrain InternalAlignment - + Constrain InternalAlignment Constrains an element to be aligned with the internal geometry of another element - + Constrains an element to be aligned with the internal geometry of another element @@ -377,7 +377,7 @@ Create a perpendicular constraint between two lines - Create a perpendicular constraint between two lines + Maak een loodrechte beperking tussen twee lijnen Create a Perpendicular constraint between two lines @@ -430,12 +430,12 @@ Constrain refraction (Snell's law') - + Constrain refraction (Snell's law') Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. @@ -529,7 +529,7 @@ Create a circle by 3 perimeter points - Create a circle by 3 perimeter points + Een cirkel aanmaken op basis van 3 omtrekpunten @@ -568,12 +568,12 @@ Create an arc of ellipse - + Create an arc of ellipse Create an arc of ellipse in the sketch - + Create an arc of ellipse in the sketch @@ -622,12 +622,12 @@ Create ellipse by 3 points - + Create ellipse by 3 points Create an ellipse by 3 points in the sketch - + Create an ellipse by 3 points in the sketch @@ -640,12 +640,12 @@ Create ellipse by center - + Create ellipse by center Create an ellipse by center in the sketch - + Create an ellipse by center in the sketch @@ -680,12 +680,12 @@ Create heptagon - + Create heptagon Create a heptagon in the sketch - + Create a heptagon in the sketch @@ -698,12 +698,12 @@ Create hexagon - + Create hexagon Create a hexagon in the sketch - + Create a hexagon in the sketch @@ -734,12 +734,12 @@ Create octagon - + Create octagon Create an octagon in the sketch - + Create an octagon in the sketch @@ -752,12 +752,12 @@ Create pentagon - + Create pentagon Create a pentagon in the sketch - + Create a pentagon in the sketch @@ -846,12 +846,12 @@ Create square - + Create square Create a square in the sketch - + Create a square in the sketch @@ -882,12 +882,12 @@ Create equilateral triangle - + Create equilateral triangle Create an equilateral triangle in the sketch - + Create an equilateral triangle in the sketch @@ -905,7 +905,7 @@ Edit the selected sketch - + Edit the selected sketch @@ -973,7 +973,7 @@ Merge sketches - + Merge sketches @@ -983,7 +983,7 @@ Select at least two sketches, please. - + Select at least two sketches, please. @@ -1051,12 +1051,12 @@ Show/hide internal geometry - + Show/hide internal geometry Show all internal geometry / hide unused internal geometry - + Show all internal geometry / hide unused internal geometry @@ -1070,7 +1070,7 @@ Select Conflicting Constraints - + Select Conflicting Constraints @@ -1083,12 +1083,12 @@ Select Constraints - + Select Constraints Select the constraints associated to the selected elements - + Select the constraints associated to the selected elements @@ -1102,7 +1102,7 @@ Select Elements associated with constraints - + Select Elements associated with constraints @@ -1115,12 +1115,12 @@ Select Horizontal Axis - + Select Horizontal Axis Select the horizontal axis - + Select the horizontal axis @@ -1133,12 +1133,12 @@ Select Origin - + Select Origin Select the origin point - + Select the origin point @@ -1152,7 +1152,7 @@ Select Redundant Constraints - + Select Redundant Constraints @@ -1165,12 +1165,12 @@ Select Vertical Axis - + Select Vertical Axis Select the vertical axis - + Select the vertical axis @@ -1223,12 +1223,12 @@ Validate sketch... - Validate sketch... + Schets valideren... Validate sketch - Validate sketch + Schets valideren @@ -1238,7 +1238,7 @@ Select one sketch, please. - Select one sketch, please. + Selecteer een schets, alstublieft. @@ -1352,7 +1352,7 @@ - + Wrong selection Verkeerde selectie @@ -1387,7 +1387,7 @@ - + Impossible constraint Onmogelijk beperking @@ -1444,7 +1444,7 @@ Select one vertex from the sketch. - Select one vertex from the sketch. + Selecteer een hoekpunt van de schets. @@ -1458,29 +1458,29 @@ Cannot add a fixed x-coordinate constraint on an external geometry! - + Cannot add a fixed x-coordinate constraint on an external geometry! Cannot add a fixed x-coordinate constraint on the root point! - + Cannot add a fixed x-coordinate constraint on the root point! Cannot add a fixed y-coordinate constraint on an external geometry! - + Cannot add a fixed y-coordinate constraint on an external geometry! Cannot add a fixed y-coordinate constraint on the root point! - + Cannot add a fixed y-coordinate constraint on the root point! Select one or more arcs or circles from the sketch. - + Select one or more arcs or circles from the sketch. @@ -1490,88 +1490,88 @@ Do you want to share the same radius for all selected elements? - + Do you want to share the same radius for all selected elements? Select only entities from the sketch. - + Select only entities from the sketch. Select one or two lines from the sketch. Or select two edges and a point. - + Select one or two lines from the sketch. Or select two edges and a point. Parallel lines - + Parallel lines An angle constraint cannot be set for two parallel lines. - + An angle constraint cannot be set for two parallel lines. Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Selected objects are not just geometry from one sketch. - + Selected objects are not just geometry from one sketch. Number of selected objects is not 3 (is %1). - + Number of selected objects is not 3 (is %1). Incompatible geometry is selected! - + Incompatible geometry is selected! Select at least one ellipse and one edge from the sketch. - + Select at least one ellipse and one edge from the sketch. Sketch axes cannot be used in internal alignment constraint - + Sketch axes cannot be used in internal alignment constraint You can not internally constraint an ellipse on other ellipse. Select only one ellipse. - + You can not internally constraint an ellipse on other ellipse. Select only one ellipse. Maximum 2 points are supported. - + Maximum 2 points are supported. Maximum 2 lines are supported. - + Maximum 2 lines are supported. Nothing to constraint - + Nothing to constraint Currently all internal geometry of the ellipse is already exposed. - + Currently all internal geometry of the ellipse is already exposed. @@ -1579,39 +1579,39 @@ Extra elements - + Extra elements More elements than possible for the given ellipse were provided. These were ignored. - + More elements than possible for the given ellipse were provided. These were ignored. You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. - + You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Currently all internal geometry of the arc of ellipse is already exposed. - + Currently all internal geometry of the arc of ellipse is already exposed. More elements than possible for the given arc of ellipse were provided. These were ignored. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Select exactly two vertexes from the sketch. @@ -1621,7 +1621,7 @@ Select two or more vertexes from the sketch. - Select two or more vertexes from the sketch. + Selecteer twee of meer hoekpunten van de schets. @@ -1716,33 +1716,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. perpendicular constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. perpendicular constraint - + Select some geometry from the sketch. Wrong number of selected objects! perpendicular constraint - + Wrong number of selected objects! Error - + Fout With 3 objects, there must be 2 curves and 1 point. tangent constraint - + With 3 objects, there must be 2 curves and 1 point. @@ -1773,19 +1775,21 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. tangent constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. tangent constraint - + Select some geometry from the sketch. Wrong number of selected objects! tangent constraint - + Wrong number of selected objects! @@ -1898,7 +1902,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Selecteer precies twee entiteiten uit de schets. - + Edit sketch Schets bewerken @@ -1970,39 +1974,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select at least two edges from the sketch. - + Select at least two edges from the sketch. One selected edge is not connectable - + One selected edge is not connectable Closing a shape formed by exactly two lines makes no sense. - + Closing a shape formed by exactly two lines makes no sense. Select elements from a single sketch. - + Select elements from a single sketch. No constraint selected - + No constraint selected At least one constraint must be selected - + At least one constraint must be selected - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. @@ -2060,7 +2064,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert angle - Insert angle + Voeg hoek in @@ -2072,26 +2076,26 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert radius - Insert radius + Voeg straal in Refractive index ratio Constraint_SnellsLaw - + Refractive index ratio Ratio n2/n1: Constraint_SnellsLaw - + Ratio n2/n1: Change radius - + Change radius @@ -2103,18 +2107,18 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio - + Refractive index ratio Ratio n2/n1: - + Ratio n2/n1: Insert length - Insert length + Voeg lengte in @@ -2149,7 +2153,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unnamed - + Unnamed @@ -2200,18 +2204,18 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher colors - Sketcher colors + Kleuren schetser Default edge color - Default edge color + Standaard rand kleur The color of edges being edited - The color of edges being edited + De kleur van de randen die bewerkt worden @@ -2222,17 +2226,17 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c The color of vertices being edited - The color of vertices being edited + De kleur van de hoekpunten die bewerkt worden Edit edge color - Edit edge color + Pas randkleur aan Edit vertex color - Edit vertex color + Pas kleur hoekpunt aan @@ -2269,11 +2273,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Constraint color - - - - Constrain color - Constrain color + Constraint color @@ -2308,7 +2308,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Default line width - Default line width + Standaard lijndikte @@ -2323,7 +2323,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Font size - Font size + Lettergrootte @@ -2339,7 +2339,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::SketcherValidation - + No missing coincidences No missing coincidences @@ -2361,21 +2361,87 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c No invalid constraints - + No invalid constraints No invalid constraints found - + No invalid constraints found Invalid constraints - + Invalid constraints Invalid constraints found + Invalid constraints found + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. @@ -2427,47 +2493,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Type: - + Type: Edge - + Rand Starting Point - + Starting Point End Point - + End Point Center Point - + Center Point Extended Naming - + Extended Naming Auto-switch to Edge - + Auto-switch to Edge <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> - + <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> Elements - + Elements @@ -2475,7 +2541,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Point - + Punt @@ -2483,7 +2549,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - + Lijn @@ -2491,7 +2557,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc - + Boog @@ -2499,19 +2565,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Circle - + Cirkel Ellipse - + Ellips Elliptical Arc - + Elliptical Arc @@ -2519,7 +2585,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Other - + Other @@ -2532,17 +2598,13 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Show grid - Show grid + Raster weergeven Grid size: Rastergrootte: - - mm - mm - Grid snap @@ -2655,7 +2717,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher validation - + + Delete constraints to external geom. + + + + Missing coincidences Missing coincidences @@ -2665,21 +2732,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Tolerantie: - - - Find - Find + + Reversed external geometry + - + + Swap endpoints in constraints + + + + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + + Find + Zoek + + + + Fix Fix - + Invalid constraints - + Invalid constraints @@ -2687,13 +2780,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid sketch - + Invalid sketch The sketch is invalid and cannot be edited. Use the sketch validation tool. - + The sketch is invalid and cannot be edited. +Use the sketch validation tool. @@ -2723,24 +2817,24 @@ Use the sketch validation tool. Over-constrained sketch - + Over-constrained sketch (click to select) - + (click to select) Sketch contains conflicting constraints - + Sketch contains conflicting constraints Sketch contains redundant constraints - + Sketch contains redundant constraints Over-constrained sketch @@ -2813,7 +2907,7 @@ Use the sketch validation tool. Create an arc of ellipse by its center, major radius, endpoints - + Create an arc of ellipse by its center, major radius, endpoints @@ -2831,7 +2925,7 @@ Use the sketch validation tool. Create a ellipse by periapsis, apoapsis, and minor radius - + Create a ellipse by periapsis, apoapsis, and minor radius @@ -2840,7 +2934,7 @@ Use the sketch validation tool. Create an ellipse by center, major radius and point - + Create an ellipse by center, major radius and point @@ -2849,7 +2943,7 @@ Use the sketch validation tool. Create a heptagon by its center and by one corner - + Create a heptagon by its center and by one corner @@ -2858,7 +2952,7 @@ Use the sketch validation tool. Create a hexagon by its center and by one corner - + Create a hexagon by its center and by one corner @@ -2867,7 +2961,7 @@ Use the sketch validation tool. Create an octagon by its center and by one corner - + Create an octagon by its center and by one corner @@ -2876,7 +2970,7 @@ Use the sketch validation tool. Create a pentagon by its center and by one corner - + Create a pentagon by its center and by one corner @@ -2885,7 +2979,7 @@ Use the sketch validation tool. Create a square by its center and by one corner - + Create a square by its center and by one corner @@ -2894,7 +2988,7 @@ Use the sketch validation tool. Create an equilateral triangle by its center and by one corner - + Create an equilateral triangle by its center and by one corner @@ -2966,7 +3060,7 @@ Do you want to detach it from the support? Sketcher tools - + Sketcher tools Sketcher geoms diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_no.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_no.qm index 76c463c1c0..2424257f1b 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_no.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_no.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_no.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_no.ts index 1eb0daf89b..583c45b92a 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_no.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_no.ts @@ -11,12 +11,12 @@ Close Shape - + Close Shape Produce closed shape by Link end point of element with next elements' starting point - + Produce closed shape by Link end point of element with next elements' starting point @@ -72,7 +72,7 @@ 3 rim points - 3 rim points + 3 punkt på sirkel @@ -85,27 +85,27 @@ Create a conic - + Create a conic Create a conic in the sketch - + Create a conic in the sketch Ellipse by center, major radius, point - + Ellipse by center, major radius, point Ellipse by Periapsis, apoapsis, minor radius - + Ellipse by Periapsis, apoapsis, minor radius Arc of ellipse by center, major radius, endpoints - + Arc of ellipse by center, major radius, endpoints @@ -118,42 +118,42 @@ Create regular polygon - + Create regular polygon Create an regular polygon in the sketcher - + Create an regular polygon in the sketcher Triangle - + Triangle Square - + Square Pentagon - + Pentagon Hexagon - + Hexagon Heptagon - + Heptagon Octagon - + Octagon @@ -166,12 +166,12 @@ Connect Edges - + Connect Edges Link end point of element with next elements' starting point - + Link end point of element with next elements' starting point @@ -318,12 +318,12 @@ Constrain InternalAlignment - + Constrain InternalAlignment Constrains an element to be aligned with the internal geometry of another element - + Constrains an element to be aligned with the internal geometry of another element @@ -430,12 +430,12 @@ Constrain refraction (Snell's law') - + Constrain refraction (Snell's law') Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. @@ -568,12 +568,12 @@ Create an arc of ellipse - + Create an arc of ellipse Create an arc of ellipse in the sketch - + Create an arc of ellipse in the sketch @@ -622,12 +622,12 @@ Create ellipse by 3 points - + Create ellipse by 3 points Create an ellipse by 3 points in the sketch - + Create an ellipse by 3 points in the sketch @@ -640,12 +640,12 @@ Create ellipse by center - + Create ellipse by center Create an ellipse by center in the sketch - + Create an ellipse by center in the sketch @@ -680,12 +680,12 @@ Create heptagon - + Create heptagon Create a heptagon in the sketch - + Create a heptagon in the sketch @@ -698,12 +698,12 @@ Create hexagon - + Create hexagon Create a hexagon in the sketch - + Create a hexagon in the sketch @@ -734,12 +734,12 @@ Create octagon - + Create octagon Create an octagon in the sketch - + Create an octagon in the sketch @@ -752,12 +752,12 @@ Create pentagon - + Create pentagon Create a pentagon in the sketch - + Create a pentagon in the sketch @@ -846,12 +846,12 @@ Create square - + Create square Create a square in the sketch - + Create a square in the sketch @@ -882,12 +882,12 @@ Create equilateral triangle - + Create equilateral triangle Create an equilateral triangle in the sketch - + Create an equilateral triangle in the sketch @@ -905,7 +905,7 @@ Edit the selected sketch - + Edit the selected sketch @@ -973,7 +973,7 @@ Merge sketches - + Merge sketches @@ -983,7 +983,7 @@ Select at least two sketches, please. - + Select at least two sketches, please. @@ -1051,12 +1051,12 @@ Show/hide internal geometry - + Show/hide internal geometry Show all internal geometry / hide unused internal geometry - + Show all internal geometry / hide unused internal geometry @@ -1070,7 +1070,7 @@ Select Conflicting Constraints - + Select Conflicting Constraints @@ -1083,12 +1083,12 @@ Select Constraints - + Select Constraints Select the constraints associated to the selected elements - + Select the constraints associated to the selected elements @@ -1102,7 +1102,7 @@ Select Elements associated with constraints - + Select Elements associated with constraints @@ -1115,12 +1115,12 @@ Select Horizontal Axis - + Select Horizontal Axis Select the horizontal axis - + Select the horizontal axis @@ -1133,12 +1133,12 @@ Select Origin - + Select Origin Select the origin point - + Select the origin point @@ -1152,7 +1152,7 @@ Select Redundant Constraints - + Select Redundant Constraints @@ -1165,12 +1165,12 @@ Select Vertical Axis - + Select Vertical Axis Select the vertical axis - + Select the vertical axis @@ -1352,7 +1352,7 @@ - + Wrong selection Feil valg @@ -1387,7 +1387,7 @@ - + Impossible constraint Umulig lås @@ -1458,29 +1458,29 @@ Cannot add a fixed x-coordinate constraint on an external geometry! - + Cannot add a fixed x-coordinate constraint on an external geometry! Cannot add a fixed x-coordinate constraint on the root point! - + Cannot add a fixed x-coordinate constraint on the root point! Cannot add a fixed y-coordinate constraint on an external geometry! - + Cannot add a fixed y-coordinate constraint on an external geometry! Cannot add a fixed y-coordinate constraint on the root point! - + Cannot add a fixed y-coordinate constraint on the root point! Select one or more arcs or circles from the sketch. - + Select one or more arcs or circles from the sketch. @@ -1490,88 +1490,88 @@ Do you want to share the same radius for all selected elements? - + Do you want to share the same radius for all selected elements? Select only entities from the sketch. - + Select only entities from the sketch. Select one or two lines from the sketch. Or select two edges and a point. - + Select one or two lines from the sketch. Or select two edges and a point. Parallel lines - + Parallel lines An angle constraint cannot be set for two parallel lines. - + En vinkel begrensning kan ikke angis for to parallelle linjer. Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Selected objects are not just geometry from one sketch. - + Selected objects are not just geometry from one sketch. Number of selected objects is not 3 (is %1). - + Number of selected objects is not 3 (is %1). Incompatible geometry is selected! - + Incompatible geometry is selected! Select at least one ellipse and one edge from the sketch. - + Select at least one ellipse and one edge from the sketch. Sketch axes cannot be used in internal alignment constraint - + Sketch axes cannot be used in internal alignment constraint You can not internally constraint an ellipse on other ellipse. Select only one ellipse. - + You can not internally constraint an ellipse on other ellipse. Select only one ellipse. Maximum 2 points are supported. - + Maximum 2 points are supported. Maximum 2 lines are supported. - + Maximum 2 lines are supported. Nothing to constraint - + Nothing to constraint Currently all internal geometry of the ellipse is already exposed. - + Currently all internal geometry of the ellipse is already exposed. @@ -1579,39 +1579,39 @@ Extra elements - + Extra elements More elements than possible for the given ellipse were provided. These were ignored. - + More elements than possible for the given ellipse were provided. These were ignored. You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. - + You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Currently all internal geometry of the arc of ellipse is already exposed. - + Currently all internal geometry of the arc of ellipse is already exposed. More elements than possible for the given arc of ellipse were provided. These were ignored. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Select exactly two vertexes from the sketch. @@ -1716,33 +1716,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. perpendicular constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. perpendicular constraint - + Select some geometry from the sketch. Wrong number of selected objects! perpendicular constraint - + Wrong number of selected objects! Error - + Feil With 3 objects, there must be 2 curves and 1 point. tangent constraint - + With 3 objects, there must be 2 curves and 1 point. @@ -1773,19 +1775,21 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. tangent constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. tangent constraint - + Select some geometry from the sketch. Wrong number of selected objects! tangent constraint - + Wrong number of selected objects! @@ -1898,7 +1902,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select exactly two entities from the sketch. - + Edit sketch Rediger skisse @@ -1970,39 +1974,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select at least two edges from the sketch. - + Select at least two edges from the sketch. One selected edge is not connectable - + One selected edge is not connectable Closing a shape formed by exactly two lines makes no sense. - + Closing a shape formed by exactly two lines makes no sense. Select elements from a single sketch. - + Select elements from a single sketch. No constraint selected - + No constraint selected At least one constraint must be selected - + At least one constraint must be selected - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. @@ -2079,19 +2083,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio Constraint_SnellsLaw - + Refractive index ratio Ratio n2/n1: Constraint_SnellsLaw - + Ratio n2/n1: Change radius - + Change radius @@ -2103,12 +2107,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio - + Refractive index ratio Ratio n2/n1: - + Ratio n2/n1: @@ -2149,7 +2153,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unnamed - + Unnamed @@ -2269,11 +2273,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Constraint color - - - - Constrain color - Constrain color + Constraint color @@ -2339,7 +2339,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::SketcherValidation - + No missing coincidences No missing coincidences @@ -2361,21 +2361,87 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c No invalid constraints - + No invalid constraints No invalid constraints found - + No invalid constraints found Invalid constraints - + Invalid constraints Invalid constraints found + Invalid constraints found + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. @@ -2427,47 +2493,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Type: - + Type: Edge - + Edge Starting Point - + Starting Point End Point - + End Point Center Point - + Center Point Extended Naming - + Extended Naming Auto-switch to Edge - + Auto-switch to Edge <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> - + <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> Elements - + Elements @@ -2475,7 +2541,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Point - + Point @@ -2483,7 +2549,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - + Linje @@ -2491,7 +2557,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc - + Bue @@ -2499,19 +2565,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Circle - + Sirkel Ellipse - + Ellipse Elliptical Arc - + Elliptical Arc @@ -2519,7 +2585,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Other - + Other @@ -2539,10 +2605,6 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Grid size: Grid size: - - mm - mm - Grid snap @@ -2655,7 +2717,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher validation - + + Delete constraints to external geom. + + + + Missing coincidences Missing coincidences @@ -2664,22 +2731,48 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Tolerance: Tolerance: + + + Reversed external geometry + + + + + Swap endpoints in constraints + + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + Find Find - - + + Fix Fix - + Invalid constraints - + Invalid constraints @@ -2687,13 +2780,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid sketch - + Invalid sketch The sketch is invalid and cannot be edited. Use the sketch validation tool. - + The sketch is invalid and cannot be edited. +Use the sketch validation tool. @@ -2723,24 +2817,24 @@ Use the sketch validation tool. Over-constrained sketch - + Over-constrained sketch (click to select) - + (click to select) Sketch contains conflicting constraints - + Sketch contains conflicting constraints Sketch contains redundant constraints - + Sketch contains redundant constraints Over-constrained sketch @@ -2813,7 +2907,7 @@ Use the sketch validation tool. Create an arc of ellipse by its center, major radius, endpoints - + Create an arc of ellipse by its center, major radius, endpoints @@ -2831,7 +2925,7 @@ Use the sketch validation tool. Create a ellipse by periapsis, apoapsis, and minor radius - + Create a ellipse by periapsis, apoapsis, and minor radius @@ -2840,7 +2934,7 @@ Use the sketch validation tool. Create an ellipse by center, major radius and point - + Create an ellipse by center, major radius and point @@ -2849,7 +2943,7 @@ Use the sketch validation tool. Create a heptagon by its center and by one corner - + Create a heptagon by its center and by one corner @@ -2858,7 +2952,7 @@ Use the sketch validation tool. Create a hexagon by its center and by one corner - + Create a hexagon by its center and by one corner @@ -2867,7 +2961,7 @@ Use the sketch validation tool. Create an octagon by its center and by one corner - + Create an octagon by its center and by one corner @@ -2876,7 +2970,7 @@ Use the sketch validation tool. Create a pentagon by its center and by one corner - + Create a pentagon by its center and by one corner @@ -2885,7 +2979,7 @@ Use the sketch validation tool. Create a square by its center and by one corner - + Create a square by its center and by one corner @@ -2894,7 +2988,7 @@ Use the sketch validation tool. Create an equilateral triangle by its center and by one corner - + Create an equilateral triangle by its center and by one corner @@ -2966,7 +3060,7 @@ Do you want to detach it from the support? Sketcher tools - + Sketcher tools Sketcher geoms diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.qm index a6632a3169..2d80ad245d 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts index 820889febe..362382046a 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts @@ -11,12 +11,12 @@ Close Shape - + Zamknij Kształt Produce closed shape by Link end point of element with next elements' starting point - + Produce closed shape by Link end point of element with next elements' starting point @@ -34,17 +34,17 @@ Create an arc in the sketcher - Create an arc in the sketcher + Utwórz łuk w szkicowniku Center and end points - Center and end points + Punkt środkowy i punkty końcowe End points and rim point - End points and rim point + Punkty końcowe i punkt na obwodzie @@ -62,17 +62,17 @@ Create a circle in the sketcher - Create a circle in the sketcher + Utwórz okrąg w szkicowniku Center and rim point - Center and rim point + Punkt środkowy i na obwodzie 3 rim points - 3 rim points + 3 punkty na obwodzie @@ -85,27 +85,27 @@ Create a conic - + Create a conic Create a conic in the sketch - + Create a conic in the sketch Ellipse by center, major radius, point - + Ellipse by center, major radius, point Ellipse by Periapsis, apoapsis, minor radius - + Ellipse by Periapsis, apoapsis, minor radius Arc of ellipse by center, major radius, endpoints - + Arc of ellipse by center, major radius, endpoints @@ -118,42 +118,42 @@ Create regular polygon - + Create regular polygon Create an regular polygon in the sketcher - + Create an regular polygon in the sketcher Triangle - + Trójkąt Square - + Kwadrat Pentagon - + Pięciokąt Hexagon - + Sześciokąt Heptagon - + Siedmiokąt Octagon - + Ośmiokąt @@ -166,12 +166,12 @@ Connect Edges - + Połącz Krawędzie Link end point of element with next elements' starting point - + Link end point of element with next elements' starting point @@ -318,12 +318,12 @@ Constrain InternalAlignment - + Constrain InternalAlignment Constrains an element to be aligned with the internal geometry of another element - + Constrains an element to be aligned with the internal geometry of another element @@ -377,7 +377,7 @@ Create a perpendicular constraint between two lines - Create a perpendicular constraint between two lines + Utwórz więż prostopadłości między dwiema liniami Create a Perpendicular constraint between two lines @@ -430,12 +430,12 @@ Constrain refraction (Snell's law') - + Constrain refraction (Snell's law') Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. @@ -453,7 +453,7 @@ Create a symmetry constraint between two points with respect to a line or a third point - Create a symmetry constraint between two points with respect to a line or a third point + Utwórz więż symetrii między dwoma punktami w odniesieniu do linii lub trzeciego punktu Create an symmetry constraint between two points with respect to a line @@ -506,12 +506,12 @@ Create arc by three points - Create arc by three points + Utwórz łuk przez trzy punkty Create an arc by its end points and a point along the arc - Create an arc by its end points and a point along the arc + Tworzy łuk przez jego punkty końcowe i punkt na łuku @@ -524,12 +524,12 @@ Create circle by three points - Create circle by three points + Utwórz okrąg przez trzy punkty Create a circle by 3 perimeter points - Create a circle by 3 perimeter points + Utwórz okrąg przez trzy punkty na obwodzie @@ -542,12 +542,12 @@ Create arc by center - Create arc by center + Utwórz łuk ze środka Create an arc by its center and by its end points - Create an arc by its center and by its end points + Tworzy łuk za pomocą jego środka i punktów końcowych Create arc @@ -568,12 +568,12 @@ Create an arc of ellipse - + Utwórz łuk w oparciu o elipsę Create an arc of ellipse in the sketch - + Utwórz łuk w oparciu o elipsę na szkicu @@ -622,12 +622,12 @@ Create ellipse by 3 points - + Utwórz elipsę względem 3 punktów Create an ellipse by 3 points in the sketch - + Utwórz elipsę względem 3 punktów na szkicu @@ -640,12 +640,12 @@ Create ellipse by center - + Utwórz elipsę względem środka Create an ellipse by center in the sketch - + Utwórz elipsę względem środka szkicu @@ -680,12 +680,12 @@ Create heptagon - + Utwórz siedmiokąt Create a heptagon in the sketch - + Utwórz siedmiokąt na szkicu @@ -698,12 +698,12 @@ Create hexagon - + Utwórz sześciokąt Create a hexagon in the sketch - + Utwórz sześciokąt na szkicu @@ -734,12 +734,12 @@ Create octagon - + Utwórz ośmiokąt Create an octagon in the sketch - + Utwórz ośmiokąt na szkicu @@ -752,12 +752,12 @@ Create pentagon - + Utwórz pięciokąt Create a pentagon in the sketch - + Utwórz pięciokąt na szkicu @@ -793,7 +793,7 @@ Create a polyline in the sketch. 'M' Key cycles behaviour - Create a polyline in the sketch. 'M' Key cycles behaviour + Utwórz polilinię w szkicu. Przycisk 'M' przełącza zachowanie Create a polyline in the sketch @@ -828,12 +828,12 @@ Create slot - Create slot + Utwórz szczelinę Create a slot in the sketch - Create a slot in the sketch + Utwórz szczelinę w szkicu @@ -846,12 +846,12 @@ Create square - + Utwórz kwadrat Create a square in the sketch - + Utwórz kwadrat na szkicu @@ -882,12 +882,12 @@ Create equilateral triangle - + Create equilateral triangle Create an equilateral triangle in the sketch - + Create an equilateral triangle in the sketch @@ -905,7 +905,7 @@ Edit the selected sketch - + Edit the selected sketch @@ -973,7 +973,7 @@ Merge sketches - + Połącz szkice @@ -983,7 +983,7 @@ Select at least two sketches, please. - + Select at least two sketches, please. @@ -1033,12 +1033,12 @@ Reorient sketch... - Reorient sketch... + Zmień orientację szkicu... Reorient the selected sketch - Reorient the selected sketch + Zmień orientację wybranego szkicu @@ -1051,12 +1051,12 @@ Show/hide internal geometry - + Show/hide internal geometry Show all internal geometry / hide unused internal geometry - + Show all internal geometry / hide unused internal geometry @@ -1070,7 +1070,7 @@ Select Conflicting Constraints - + Select Conflicting Constraints @@ -1083,12 +1083,12 @@ Select Constraints - + Select Constraints Select the constraints associated to the selected elements - + Select the constraints associated to the selected elements @@ -1102,7 +1102,7 @@ Select Elements associated with constraints - + Select Elements associated with constraints @@ -1115,12 +1115,12 @@ Select Horizontal Axis - + Select Horizontal Axis Select the horizontal axis - + Select the horizontal axis @@ -1133,12 +1133,12 @@ Select Origin - + Select Origin Select the origin point - + Select the origin point @@ -1152,7 +1152,7 @@ Select Redundant Constraints - + Select Redundant Constraints @@ -1165,12 +1165,12 @@ Select Vertical Axis - + Select Vertical Axis Select the vertical axis - + Select the vertical axis @@ -1223,12 +1223,12 @@ Validate sketch... - Validate sketch... + Sprawdź poprawność szkicu... Validate sketch - Validate sketch + Sprawdź poprawność szkicu @@ -1238,7 +1238,7 @@ Select one sketch, please. - Select one sketch, please. + Proszę wybrać jeden szkic. @@ -1352,7 +1352,7 @@ - + Wrong selection Niewłaściwy wybór @@ -1387,7 +1387,7 @@ - + Impossible constraint Niemożliwe ograniczenie @@ -1458,29 +1458,29 @@ Cannot add a fixed x-coordinate constraint on an external geometry! - + Cannot add a fixed x-coordinate constraint on an external geometry! Cannot add a fixed x-coordinate constraint on the root point! - + Cannot add a fixed x-coordinate constraint on the root point! Cannot add a fixed y-coordinate constraint on an external geometry! - + Cannot add a fixed y-coordinate constraint on an external geometry! Cannot add a fixed y-coordinate constraint on the root point! - + Cannot add a fixed y-coordinate constraint on the root point! Select one or more arcs or circles from the sketch. - + Select one or more arcs or circles from the sketch. @@ -1490,88 +1490,88 @@ Do you want to share the same radius for all selected elements? - + Do you want to share the same radius for all selected elements? Select only entities from the sketch. - + Select only entities from the sketch. Select one or two lines from the sketch. Or select two edges and a point. - + Select one or two lines from the sketch. Or select two edges and a point. Parallel lines - + Parallel lines An angle constraint cannot be set for two parallel lines. - + An angle constraint cannot be set for two parallel lines. Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Selected objects are not just geometry from one sketch. - + Selected objects are not just geometry from one sketch. Number of selected objects is not 3 (is %1). - + Number of selected objects is not 3 (is %1). Incompatible geometry is selected! - + Incompatible geometry is selected! Select at least one ellipse and one edge from the sketch. - + Select at least one ellipse and one edge from the sketch. Sketch axes cannot be used in internal alignment constraint - + Sketch axes cannot be used in internal alignment constraint You can not internally constraint an ellipse on other ellipse. Select only one ellipse. - + You can not internally constraint an ellipse on other ellipse. Select only one ellipse. Maximum 2 points are supported. - + Maximum 2 points are supported. Maximum 2 lines are supported. - + Maximum 2 lines are supported. Nothing to constraint - + Nothing to constraint Currently all internal geometry of the ellipse is already exposed. - + Currently all internal geometry of the ellipse is already exposed. @@ -1579,39 +1579,39 @@ Extra elements - + Dodatkowe elementy More elements than possible for the given ellipse were provided. These were ignored. - + More elements than possible for the given ellipse were provided. These were ignored. You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. - + You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Currently all internal geometry of the arc of ellipse is already exposed. - + Currently all internal geometry of the arc of ellipse is already exposed. More elements than possible for the given arc of ellipse were provided. These were ignored. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Select exactly two vertexes from the sketch. @@ -1621,7 +1621,7 @@ Select two or more vertexes from the sketch. - Select two or more vertexes from the sketch. + Wybierz dwa lub więcej wierzchołków ze szkicu. @@ -1716,33 +1716,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. perpendicular constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. perpendicular constraint - + Select some geometry from the sketch. Wrong number of selected objects! perpendicular constraint - + Wrong number of selected objects! Error - + Błąd With 3 objects, there must be 2 curves and 1 point. tangent constraint - + With 3 objects, there must be 2 curves and 1 point. @@ -1773,19 +1775,21 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. tangent constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. tangent constraint - + Select some geometry from the sketch. Wrong number of selected objects! tangent constraint - + Wrong number of selected objects! @@ -1847,7 +1851,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. - Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. + Wybierz dwa punkty i linię symetrii, dwa punkty i punkt symetrii lub linię i punkt symetrii ze szkicu. @@ -1898,7 +1902,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Zaznacz dokładnie dwa elementy na szkicu. - + Edit sketch Edycja szkicu @@ -1970,39 +1974,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select at least two edges from the sketch. - + Select at least two edges from the sketch. One selected edge is not connectable - + One selected edge is not connectable Closing a shape formed by exactly two lines makes no sense. - + Closing a shape formed by exactly two lines makes no sense. Select elements from a single sketch. - + Select elements from a single sketch. No constraint selected - + No constraint selected At least one constraint must be selected - + At least one constraint must be selected - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. @@ -2060,7 +2064,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert angle - Insert angle + Wstaw kąt @@ -2072,26 +2076,26 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert radius - Insert radius + Wstaw promień Refractive index ratio Constraint_SnellsLaw - + Refractive index ratio Ratio n2/n1: Constraint_SnellsLaw - + Ratio n2/n1: Change radius - + Zmień promień @@ -2103,18 +2107,18 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio - + Refractive index ratio Ratio n2/n1: - + Ratio n2/n1: Insert length - Insert length + Wstaw długość @@ -2149,7 +2153,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unnamed - + Nienazwany @@ -2200,39 +2204,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher colors - Sketcher colors + Kolory szkicownika Default edge color - Default edge color + Domyślny kolor krawędzi The color of edges being edited - The color of edges being edited + Kolor edytowanej krawędzi Default vertex color - Default vertex color + Domyślny kolor wierzchołków The color of vertices being edited - The color of vertices being edited + Kolor edytowanych wierzchołków Edit edge color - Edit edge color + Edycja koloru krawędzi Edit vertex color - Edit vertex color + Edycja koloru wierzchołków @@ -2242,7 +2246,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c The color of construction geometry in edit mode - The color of construction geometry in edit mode + Kolor geometrii konstrukcyjnej w trybie edycji @@ -2252,45 +2256,41 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c The color of external geometry in edit mode - The color of external geometry in edit mode + Kolor zewnętrznej geometrii w trybie edycji Fully constrained geometry - Fully constrained geometry + Geometria w pełni zwymiarowana, odebrano wszystkie stopnie swobody The color of fully constrained geometry in edit mode - The color of fully constrained geometry in edit mode + Kolor w pełni zdefiniowanej geometrii w trybie edycji Constraint color - - - - Constrain color - Constrain color + Constraint color Datum color - Datum color + Kolor odniesienia Datum text size - Datum text size + Rozmiar tekstu odniesienia The default line thickness for new shapes - The default line thickness for new shapes + Domyślna grubość linii dla nowych kształtów @@ -2303,79 +2303,145 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Default vertex size - Default vertex size + Domyślny rozmiar wierzchołków Default line width - Default line width + Domyślna szerokość linii Cursor text color - Cursor text color + Kolor kursora tekstu Sketch editing - Sketch editing + Edytowanie szkicu Font size - Font size + Wielkość czcionki Grid line pattern - Grid line pattern + Wzór linii siatki Ask for value after creating a distance constraint - Ask for value after creating a distance constraint + Spytaj o wartość po stworzeniu wiązania odległości SketcherGui::SketcherValidation - + No missing coincidences - No missing coincidences + Brak brakujących wiązań No missing coincidences found - No missing coincidences found + Nie znaleziono niezbieżności Missing coincidences - Missing coincidences + Brakujące wiązania %1 missing coincidences found - %1 missing coincidences found + %1 znaleziono brakujących niezbieżności No invalid constraints - + No invalid constraints No invalid constraints found - + No invalid constraints found Invalid constraints - + Invalid constraints Invalid constraints found + Invalid constraints found + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. @@ -2427,47 +2493,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Type: - + Typ: Edge - + Krawędź Starting Point - + Starting Point End Point - + Punkt Końcowy Center Point - + Center Point Extended Naming - + Extended Naming Auto-switch to Edge - + Auto-switch to Edge <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> - + <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> Elements - + Elementy @@ -2475,7 +2541,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Point - + Punkt @@ -2483,7 +2549,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - + Linia @@ -2491,7 +2557,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc - + Łuk @@ -2499,19 +2565,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Circle - + Okrąg Ellipse - + Elipsa Elliptical Arc - + Elliptical Arc @@ -2519,7 +2585,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Other - + Inne @@ -2532,17 +2598,13 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Show grid - Show grid + Pokaż siatkę Grid size: Rozmiar siatki: - - mm - mm - Grid snap @@ -2652,34 +2714,65 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher validation - Sketcher validation + Sprawdzenie poprawności szkicu - + + Delete constraints to external geom. + + + + Missing coincidences - Missing coincidences + Brakujące wiązania Tolerance: Tolerancja: + + + Reversed external geometry + + + + + Swap endpoints in constraints + + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + Find - Find + Znajdź - - + + Fix - Fix + Napraw - + Invalid constraints - + Invalid constraints @@ -2687,13 +2780,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid sketch - + Invalid sketch The sketch is invalid and cannot be edited. Use the sketch validation tool. - + The sketch is invalid and cannot be edited. +Use the sketch validation tool. @@ -2723,24 +2817,24 @@ Use the sketch validation tool. Over-constrained sketch - + Over-constrained sketch (click to select) - + (kliknij, aby wybrać) Sketch contains conflicting constraints - + Sketch contains conflicting constraints Sketch contains redundant constraints - + Sketch contains redundant constraints Over-constrained sketch @@ -2786,7 +2880,7 @@ Use the sketch validation tool. Create an arc by its end points and a point along the arc - Create an arc by its end points and a point along the arc + Tworzy łuk przez jego punkty końcowe i punkt na łuku @@ -2795,7 +2889,7 @@ Use the sketch validation tool. Create a circle by 3 rim points - Create a circle by 3 rim points + Tworzy koło w oparciu o 3 punkty na obręczy @@ -2804,7 +2898,7 @@ Use the sketch validation tool. Create an arc by its center and by its end points - Create an arc by its center and by its end points + Tworzy łuk za pomocą jego środka i punktów końcowych @@ -2813,7 +2907,7 @@ Use the sketch validation tool. Create an arc of ellipse by its center, major radius, endpoints - + Create an arc of ellipse by its center, major radius, endpoints @@ -2822,7 +2916,7 @@ Use the sketch validation tool. Create a circle by its center and by a rim point - Create a circle by its center and by a rim point + Tworzy koło za pomocą jego środka i punku na obręczy @@ -2831,7 +2925,7 @@ Use the sketch validation tool. Create a ellipse by periapsis, apoapsis, and minor radius - + Create a ellipse by periapsis, apoapsis, and minor radius @@ -2840,7 +2934,7 @@ Use the sketch validation tool. Create an ellipse by center, major radius and point - + Create an ellipse by center, major radius and point @@ -2849,7 +2943,7 @@ Use the sketch validation tool. Create a heptagon by its center and by one corner - + Create a heptagon by its center and by one corner @@ -2858,7 +2952,7 @@ Use the sketch validation tool. Create a hexagon by its center and by one corner - + Create a hexagon by its center and by one corner @@ -2867,7 +2961,7 @@ Use the sketch validation tool. Create an octagon by its center and by one corner - + Create an octagon by its center and by one corner @@ -2876,7 +2970,7 @@ Use the sketch validation tool. Create a pentagon by its center and by one corner - + Create a pentagon by its center and by one corner @@ -2885,7 +2979,7 @@ Use the sketch validation tool. Create a square by its center and by one corner - + Create a square by its center and by one corner @@ -2894,7 +2988,7 @@ Use the sketch validation tool. Create an equilateral triangle by its center and by one corner - + Create an equilateral triangle by its center and by one corner @@ -2902,14 +2996,13 @@ Use the sketch validation tool. Sketch has support - Sketch has support + Szkic ze wsparciem Sketch with a support face cannot be reoriented. Do you want to detach it from the support? - Sketch with a support face cannot be reoriented. -Do you want to detach it from the support? + Szkic ze wsparciem powierzchni nie może być przeorientowany. Czy chcesz go odłączyć od wsparcia? @@ -2966,7 +3059,7 @@ Do you want to detach it from the support? Sketcher tools - + Narzędzia szkicownika Sketcher geoms diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.qm index f8f07b7792..a508b0ee5c 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts index ef9615e702..ae6bfa3e38 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts @@ -11,12 +11,12 @@ Close Shape - + Fechar forma Produce closed shape by Link end point of element with next elements' starting point - + Produze uma forma fechada ligando o ponto de extremidade do elemento com o ponto inicial dos elementos próximos @@ -85,27 +85,27 @@ Create a conic - + Criar uma cônica Create a conic in the sketch - + Criar uma cônica no esboço Ellipse by center, major radius, point - + Elipse pelo centro, raio maior, ponto Ellipse by Periapsis, apoapsis, minor radius - + Elipse pelo periélio, apoapsis, menor raio Arc of ellipse by center, major radius, endpoints - + Arco de elipse pelo centro, raio principal, pontos de extremidade @@ -118,42 +118,42 @@ Create regular polygon - + Criar polígono regular Create an regular polygon in the sketcher - + Criar um polígono regular no esboço Triangle - + Triângulo Square - + Quadrado Pentagon - + Pentágono Hexagon - + Hexágono Heptagon - + Heptágono Octagon - + Octógono @@ -166,12 +166,12 @@ Connect Edges - + Unir as pontas Link end point of element with next elements' starting point - + Liga os pontos de extremidade do elemento com o ponto de partida dos elementos próximos @@ -318,12 +318,12 @@ Constrain InternalAlignment - + Restringir alinhamento interno Constrains an element to be aligned with the internal geometry of another element - + Restringe um elemento para ser alinhado com a geometria interna de um outro elemento @@ -430,12 +430,12 @@ Constrain refraction (Snell's law') - + Restrição de refração (lei de Snell) Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - + Crie uma restrição de refração (lei de Snell) entre dois pontos de extremidade de raios usando uma aresta como interface. @@ -568,12 +568,12 @@ Create an arc of ellipse - + Criar um arco de elipse Create an arc of ellipse in the sketch - + Criar um arco de elipse no esboço @@ -622,12 +622,12 @@ Create ellipse by 3 points - + Criar elipse por 3 pontos Create an ellipse by 3 points in the sketch - + Criar uma elipse por 3 pontos no esboço @@ -640,12 +640,12 @@ Create ellipse by center - + Criar elipse pelo centro Create an ellipse by center in the sketch - + Criar uma elipse pelo centro no esboço @@ -680,12 +680,12 @@ Create heptagon - + Criar heptágono Create a heptagon in the sketch - + Criar um heptágono no esboço @@ -698,12 +698,12 @@ Create hexagon - + Criar hexágono Create a hexagon in the sketch - + Criar um hexágono no esboço @@ -734,12 +734,12 @@ Create octagon - + Criar octógono Create an octagon in the sketch - + Criar um octógono no esboço @@ -752,12 +752,12 @@ Create pentagon - + Criar pentágono Create a pentagon in the sketch - + Criar um pentágono no esboço @@ -846,12 +846,12 @@ Create square - + Criar quadrado Create a square in the sketch - + Criar um quadrado no esboço @@ -882,12 +882,12 @@ Create equilateral triangle - + Criar triângulo equilátero Create an equilateral triangle in the sketch - + Criar um triângulo equilátero no esboço @@ -905,7 +905,7 @@ Edit the selected sketch - + Editar o esboço selecionado @@ -973,7 +973,7 @@ Merge sketches - + Mesclar esboços @@ -983,7 +983,7 @@ Select at least two sketches, please. - + Selecione pelo menos dois esboços, por favor. @@ -1051,12 +1051,12 @@ Show/hide internal geometry - + Mostrar/ocultar geometria interna Show all internal geometry / hide unused internal geometry - + Mostrar toda a geometria interna / ocultar geometria interna não utilizada @@ -1070,7 +1070,7 @@ Select Conflicting Constraints - + Selecionar restrições conflitantes @@ -1083,12 +1083,12 @@ Select Constraints - + Selecionar restrições Select the constraints associated to the selected elements - + Selecione as restrições associadas aos elementos selecionados @@ -1102,7 +1102,7 @@ Select Elements associated with constraints - + Selecionar elementos associados às restrições @@ -1115,12 +1115,12 @@ Select Horizontal Axis - + Selecionar o eixo horizontal Select the horizontal axis - + Selecionar o eixo horizontal @@ -1133,12 +1133,12 @@ Select Origin - + Selecionar a origem Select the origin point - + Selecionar o ponto de origem @@ -1152,7 +1152,7 @@ Select Redundant Constraints - + Selecionar restrições redundantes @@ -1165,12 +1165,12 @@ Select Vertical Axis - + Selecionar o eixo vertical Select the vertical axis - + Selecionar o eixo vertical @@ -1352,7 +1352,7 @@ - + Wrong selection Seleção errada @@ -1387,7 +1387,7 @@ - + Impossible constraint Restrição impossível @@ -1458,29 +1458,29 @@ Cannot add a fixed x-coordinate constraint on an external geometry! - + Não é possível adicionar uma restrição de coordenada x fixa em uma geometria externa! Cannot add a fixed x-coordinate constraint on the root point! - + Não é possível adicionar uma restrição de coordenada x fixa no ponto de raiz! Cannot add a fixed y-coordinate constraint on an external geometry! - + Não é possível adicionar uma restrição de coordenada y fixa em uma geometria externa! Cannot add a fixed y-coordinate constraint on the root point! - + Não é possível adicionar uma restrição de coordenada y fixa no ponto de raiz! Select one or more arcs or circles from the sketch. - + Selecione um ou mais arcos ou círculos no esboço. @@ -1490,88 +1490,88 @@ Do you want to share the same radius for all selected elements? - + Deseja compartilhar o mesmo raio para todos os elementos selecionados? Select only entities from the sketch. - + Selecione apenas entidades no esboço. Select one or two lines from the sketch. Or select two edges and a point. - + Selecione uma ou duas linhas no esboço. Ou selecione um ponto e duas arestas. Parallel lines - + Linhas paralelas An angle constraint cannot be set for two parallel lines. - + Uma restrição de ângulo não pode ser aplicada em duas linhas paralelas. Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Selecione dois pontos finais de linhas para atuar como raios e uma aresta que representa um limite. O primeiro ponto selecionado corresponde ao índice n1, o segundo ao n2, e a distância define a relação n2/n1. Selected objects are not just geometry from one sketch. - + Objetos selecionados não são apenas geometria de um esboço só. Number of selected objects is not 3 (is %1). - + Número de objetos selecionados não é 3 (é %1). Incompatible geometry is selected! - + Geometria incompatível selecionada! Select at least one ellipse and one edge from the sketch. - + Selecione pelo menos uma elipse e uma aresta do esboço. Sketch axes cannot be used in internal alignment constraint - + Eixos do esboço não podem ser usados para uma restrição de alinhamento interno You can not internally constraint an ellipse on other ellipse. Select only one ellipse. - + Não é possível restringir internamente uma elipse sobre uma outra elipse. Selecione apenas uma elipse. Maximum 2 points are supported. - + Máximo 2 pontos são suportados. Maximum 2 lines are supported. - + Máximo 2 linhas são suportadas. Nothing to constraint - + Nada para restringir Currently all internal geometry of the ellipse is already exposed. - + Atualmente, toda a geometria interna da elipse já está exposta. @@ -1579,39 +1579,39 @@ Extra elements - + Elementos extra More elements than possible for the given ellipse were provided. These were ignored. - + Foram fornecidos mais elementos do que o possível para a elipse dada. Estes foram ignorados. You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. - + Não é possível restringir internamente um arco de elipse sobre um outro arco de elipse. Selecione apenas um arco de elipse. You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Não é possivel restringir internamente uma elipse sobre um arco de elipse. Selecione apenas uma elipse ou um arco de elipse. Currently all internal geometry of the arc of ellipse is already exposed. - + Atualmente, toda a geometria interna do arco de elipse já está exposta. More elements than possible for the given arc of ellipse were provided. These were ignored. - + Foram fornecidos mais elementos do que o possível para o arco de elipse dado. Estes foram ignorados. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Atualmente a geometria interna só é suportada para elipses ou arcos de elipse. O último elemento selecionado deve ser uma elipse ou um arco de elipse. Select exactly two vertexes from the sketch. @@ -1716,33 +1716,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. perpendicular constraint - + Há um número de maneiras em que essa restrição pode ser aplicada. + +Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois pontos de extremidade; duas curvas e um ponto. Select some geometry from the sketch. perpendicular constraint - + Selecione alguma geometria do esboço. Wrong number of selected objects! perpendicular constraint - + Número errado de objetos selecionados! Error - + Erro With 3 objects, there must be 2 curves and 1 point. tangent constraint - + Com 3 objetos, deve haver 2 curvas e 1 ponto. @@ -1773,19 +1775,21 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. tangent constraint - + Há um número de maneiras em que essa restrição pode ser aplicada. + +Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois pontos de extremidade; duas curvas e um ponto. Select some geometry from the sketch. tangent constraint - + Selecione alguma geometria do esboço. Wrong number of selected objects! tangent constraint - + Número errado de objetos selecionados! @@ -1898,7 +1902,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Selecione exatamente duas entidades do esboço. - + Edit sketch Editar esboço @@ -1970,39 +1974,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select at least two edges from the sketch. - + Selecione pelo menos duas arestas do esboço. One selected edge is not connectable - + Uma aresta selecionada não é conectável Closing a shape formed by exactly two lines makes no sense. - + Fechar uma forma formada por exatamente duas linhas não faz sentido. Select elements from a single sketch. - + Selecione elementos de um esboço único. No constraint selected - + Nenhuma restrição selecionada At least one constraint must be selected - + Pelo menos uma restrição deve ser selecionada - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Atualmente a geometria interna só é suportada para elipses ou arcos de elipse. O último elemento selecionado deve ser uma elipse ou um arco de elipse. @@ -2079,19 +2083,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio Constraint_SnellsLaw - + Relação de índice de refração Ratio n2/n1: Constraint_SnellsLaw - + Relação n2/n1: Change radius - + Mudar raio @@ -2103,12 +2107,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio - + Relação de índice de refração Ratio n2/n1: - + Relação n2/n1: @@ -2149,7 +2153,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unnamed - + Sem nome @@ -2269,11 +2273,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Constraint color - - - - Constrain color - Cor das restrições + Cor das restrições @@ -2339,7 +2339,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::SketcherValidation - + No missing coincidences Nenhum coincidência faltante @@ -2361,21 +2361,87 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c No invalid constraints - + Nenhuma restrição inválida No invalid constraints found - + Nenhuma restrição inválida encontrada Invalid constraints - + Restrições inválidas Invalid constraints found + Restrições inválidas encontradas + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. @@ -2427,47 +2493,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Type: - + Tipo: Edge - + Aresta Starting Point - + Ponto de partida End Point - + Ponto final Center Point - + Ponto central Extended Naming - + Rotulagem extendida Auto-switch to Edge - + Auto-seleção de aresta <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> - + <html><head/> <body><p>&quot;Ctrl&quot;: seleção múltipla</p> <p>&quot;Z&quot;: mudar para o próximo tipo válido</p></body></html> Elements - + Elementos @@ -2475,7 +2541,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Point - + Ponto @@ -2483,7 +2549,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - + Linha @@ -2491,7 +2557,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc - + Arco @@ -2499,19 +2565,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Circle - + Círculo Ellipse - + Elipse Elliptical Arc - + Arco elíptico @@ -2519,7 +2585,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Other - + Outro @@ -2539,10 +2605,6 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Grid size: Tamanho da grade: - - mm - mm - Grid snap @@ -2655,7 +2717,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Validação de esboço - + + Delete constraints to external geom. + + + + Missing coincidences Coincidências faltantes @@ -2664,22 +2731,48 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Tolerance: Tolerância: + + + Reversed external geometry + + + + + Swap endpoints in constraints + + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + Find Procurar - - + + Fix Consertar - + Invalid constraints - + Restrições inválidas @@ -2687,13 +2780,13 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid sketch - + Esboço inválido The sketch is invalid and cannot be edited. Use the sketch validation tool. - + O esboço é inválido e não pode ser editado. Use a ferramenta de validação de esboço. @@ -2723,24 +2816,24 @@ Use the sketch validation tool. Over-constrained sketch - + Esboço superrestrito (click to select) - + (clique para selecionar) Sketch contains conflicting constraints - + Esboço contém restrições conflitantes Sketch contains redundant constraints - + Esboço contém restrições redundantes Over-constrained sketch @@ -2813,7 +2906,7 @@ Use the sketch validation tool. Create an arc of ellipse by its center, major radius, endpoints - + Criar um arco de elipse pelo seu centro, raio principal, pontos de extremidade @@ -2831,7 +2924,7 @@ Use the sketch validation tool. Create a ellipse by periapsis, apoapsis, and minor radius - + Criar uma elipse por periapsis apoapsis e menor raio @@ -2840,7 +2933,7 @@ Use the sketch validation tool. Create an ellipse by center, major radius and point - + Criar uma elipse pelo centro, raio maior e ponto @@ -2849,7 +2942,7 @@ Use the sketch validation tool. Create a heptagon by its center and by one corner - + Criar um heptágono pelo seu centro e por um canto @@ -2858,7 +2951,7 @@ Use the sketch validation tool. Create a hexagon by its center and by one corner - + Criar um hexágono por seu centro e um canto @@ -2867,7 +2960,7 @@ Use the sketch validation tool. Create an octagon by its center and by one corner - + Criar um octógono pelo seu centro e por um canto @@ -2876,7 +2969,7 @@ Use the sketch validation tool. Create a pentagon by its center and by one corner - + Criar um pentágono pelo seu centro e por um canto @@ -2885,7 +2978,7 @@ Use the sketch validation tool. Create a square by its center and by one corner - + Criar um quadrado pelo seu centro e por um canto @@ -2894,7 +2987,7 @@ Use the sketch validation tool. Create an equilateral triangle by its center and by one corner - + Criar um triângulo equilátero, pelo seu centro e por um canto @@ -2965,7 +3058,7 @@ Do you want to detach it from the support? Sketcher tools - + Ferramentas de esboço Sketcher geoms diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.qm index d4a438c251..4d6b227960 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts index a98e1f820f..610d7b8740 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts @@ -11,12 +11,12 @@ Close Shape - + Fechar forma Produce closed shape by Link end point of element with next elements' starting point - + Produzir forma fechada ligando o ponto de extremidade do elemento com o ponto de inicial dos elementos próximos @@ -34,17 +34,17 @@ Create an arc in the sketcher - Create an arc in the sketcher + Criar um arco na mesa de esboços Center and end points - Center and end points + Pontos central e final End points and rim point - End points and rim point + Pontos de extremidade e ponto de borda @@ -62,17 +62,17 @@ Create a circle in the sketcher - Create a circle in the sketcher + Criar um círculo na mesa de esboços Center and rim point - Center and rim point + Ponto do centro e borda 3 rim points - 3 rim points + 3 pontos na circunferência @@ -85,27 +85,27 @@ Create a conic - + Criar uma curva cónica Create a conic in the sketch - + Criar uma curva cónica no esboçoesboço Ellipse by center, major radius, point - + Elipse pelo centro, raio maior, ponto Ellipse by Periapsis, apoapsis, minor radius - + Elipse pelo periélio, apoapse, raio menor Arc of ellipse by center, major radius, endpoints - + Arco da elipse pelo centro, raio maior, extremidades @@ -118,42 +118,42 @@ Create regular polygon - + Criar polígono regular Create an regular polygon in the sketcher - + Criar um polígono regular no esboço Triangle - + Triângulo Square - + Quadrado Pentagon - + Pentágono Hexagon - + Hexágono Heptagon - + Heptágono Octagon - + Octógono @@ -166,12 +166,12 @@ Connect Edges - + Unir as pontas Link end point of element with next elements' starting point - + Liga o ponto final do elemento com o inicial dos próximos @@ -318,12 +318,12 @@ Constrain InternalAlignment - + Restringir alinhamento interno Constrains an element to be aligned with the internal geometry of another element - + Restringir o alinhamento do elemento com a geometria interna de outro @@ -377,7 +377,7 @@ Create a perpendicular constraint between two lines - Create a perpendicular constraint between two lines + Criar uma restrição perpendicular entre duas linhas Create a Perpendicular constraint between two lines @@ -430,12 +430,12 @@ Constrain refraction (Snell's law') - + Restrição refracção (lei de Snell) Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - + Crie uma restrição de refração (lei de Snell) entre dois pontos de extremidade de raios usando uma aresta como interface. @@ -453,7 +453,7 @@ Create a symmetry constraint between two points with respect to a line or a third point - Create a symmetry constraint between two points with respect to a line or a third point + Criar uma restrição de simetria entre dois pontos em relação a uma linha ou um terceiro ponto Create an symmetry constraint between two points with respect to a line @@ -506,7 +506,7 @@ Create arc by three points - Create arc by three points + Criar um arco baseado em três pontos @@ -524,12 +524,12 @@ Create circle by three points - Create circle by three points + Criar um círculo baseado em três pontos Create a circle by 3 perimeter points - Create a circle by 3 perimeter points + Criar um arco baseado em três pontos do perímetro @@ -542,7 +542,7 @@ Create arc by center - Create arc by center + Criar um arco baseado no centro @@ -568,12 +568,12 @@ Create an arc of ellipse - + Criar um arco de elipse Create an arc of ellipse in the sketch - + Criar um arco de elipse no esboço @@ -622,12 +622,12 @@ Create ellipse by 3 points - + Criar elipse com 3 pontos Create an ellipse by 3 points in the sketch - + Criar uma elipse com 3 pontos no esboço @@ -640,12 +640,12 @@ Create ellipse by center - + Criar elipse pelo centro Create an ellipse by center in the sketch - + Criar uma elipse pelo centro no esboço @@ -680,12 +680,12 @@ Create heptagon - + Criar heptágono Create a heptagon in the sketch - + Criar um heptágono no esboço @@ -698,12 +698,12 @@ Create hexagon - + Criar hexágono Create a hexagon in the sketch - + Criar um hexágono no esboço @@ -734,12 +734,12 @@ Create octagon - + Criar octógono Create an octagon in the sketch - + Criar um octógono no esboço @@ -752,12 +752,12 @@ Create pentagon - + Criar pentágono Create a pentagon in the sketch - + Criar um pentágono no esboço @@ -793,7 +793,7 @@ Create a polyline in the sketch. 'M' Key cycles behaviour - Create a polyline in the sketch. 'M' Key cycles behaviour + Crie uma polilinha na mesa de esboços. Tecla 'M' alterna o comportamento Create a polyline in the sketch @@ -828,12 +828,12 @@ Create slot - Create slot + Criar uma ranhura Create a slot in the sketch - Create a slot in the sketch + Criar uma ranhura no esboço @@ -846,12 +846,12 @@ Create square - + Criar quadrado Create a square in the sketch - + Criar um quadrado no esboço @@ -882,12 +882,12 @@ Create equilateral triangle - + Criar triângulo equilátero Create an equilateral triangle in the sketch - + Criar um triângulo equilátero no esboço @@ -905,7 +905,7 @@ Edit the selected sketch - + Editar o esboço selecionado @@ -973,7 +973,7 @@ Merge sketches - + Unir esboços @@ -983,7 +983,7 @@ Select at least two sketches, please. - + Selecione pelo menos dois esboços, por favor. @@ -1033,12 +1033,12 @@ Reorient sketch... - Reorient sketch... + Reorientar esboço... Reorient the selected sketch - Reorient the selected sketch + Reorientar o esboço selecionado @@ -1051,12 +1051,12 @@ Show/hide internal geometry - + Mostrar/ocultar geometria interna Show all internal geometry / hide unused internal geometry - + Mostrar toda a geometria interna / ocultar geometria interna não utilizada @@ -1070,7 +1070,7 @@ Select Conflicting Constraints - + Selecionar restrições em conflito @@ -1083,12 +1083,12 @@ Select Constraints - + Selecionar restrições Select the constraints associated to the selected elements - + Selecione as restrições associadas aos elementos selecionados @@ -1102,7 +1102,7 @@ Select Elements associated with constraints - + Selecionar elementos associados às restrições @@ -1115,12 +1115,12 @@ Select Horizontal Axis - + Selecionar o eixo horizontal Select the horizontal axis - + Selecionar o eixo horizontal @@ -1133,12 +1133,12 @@ Select Origin - + Selecionar origem Select the origin point - + Selecionar o ponto de origem @@ -1152,7 +1152,7 @@ Select Redundant Constraints - + Selecionar restrições redundantes @@ -1165,12 +1165,12 @@ Select Vertical Axis - + Selecionar o eixo vertical Select the vertical axis - + Selecionar o eixo vertical @@ -1223,12 +1223,12 @@ Validate sketch... - Validate sketch... + Validar o esboço... Validate sketch - Validate sketch + Validar o esboço @@ -1238,7 +1238,7 @@ Select one sketch, please. - Select one sketch, please. + Selecione um esboço, por favor. @@ -1352,7 +1352,7 @@ - + Wrong selection Seleção errada @@ -1387,7 +1387,7 @@ - + Impossible constraint Restrição impossível @@ -1444,7 +1444,7 @@ Select one vertex from the sketch. - Select one vertex from the sketch. + Selecione um vértice do esboço. @@ -1458,29 +1458,29 @@ Cannot add a fixed x-coordinate constraint on an external geometry! - + Não é possível criar a restrição de coordenada x fixa numa geometria externa! Cannot add a fixed x-coordinate constraint on the root point! - + Não é possível criar uma restrição de coordenada x fixa no ponto de origem! Cannot add a fixed y-coordinate constraint on an external geometry! - + Não é possível criar uma restrição de coordenada y fixa numa geometria externa! Cannot add a fixed y-coordinate constraint on the root point! - + Não é possível criar uma restrição de coordenada y fixa no ponto de origem! Select one or more arcs or circles from the sketch. - + Selecione um ou mais arcos ou círculos no esboço. @@ -1490,88 +1490,88 @@ Do you want to share the same radius for all selected elements? - + Do you want to share the same radius for all selected elements? Select only entities from the sketch. - + Select only entities from the sketch. Select one or two lines from the sketch. Or select two edges and a point. - + Select one or two lines from the sketch. Or select two edges and a point. Parallel lines - + Parallel lines An angle constraint cannot be set for two parallel lines. - + An angle constraint cannot be set for two parallel lines. Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Selected objects are not just geometry from one sketch. - + Selected objects are not just geometry from one sketch. Number of selected objects is not 3 (is %1). - + Number of selected objects is not 3 (is %1). Incompatible geometry is selected! - + Incompatible geometry is selected! Select at least one ellipse and one edge from the sketch. - + Select at least one ellipse and one edge from the sketch. Sketch axes cannot be used in internal alignment constraint - + Sketch axes cannot be used in internal alignment constraint You can not internally constraint an ellipse on other ellipse. Select only one ellipse. - + You can not internally constraint an ellipse on other ellipse. Select only one ellipse. Maximum 2 points are supported. - + Maximum 2 points are supported. Maximum 2 lines are supported. - + Maximum 2 lines are supported. Nothing to constraint - + Nothing to constraint Currently all internal geometry of the ellipse is already exposed. - + Currently all internal geometry of the ellipse is already exposed. @@ -1579,39 +1579,39 @@ Extra elements - + Extra elements More elements than possible for the given ellipse were provided. These were ignored. - + More elements than possible for the given ellipse were provided. These were ignored. You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. - + You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Currently all internal geometry of the arc of ellipse is already exposed. - + Currently all internal geometry of the arc of ellipse is already exposed. More elements than possible for the given arc of ellipse were provided. These were ignored. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Select exactly two vertexes from the sketch. @@ -1637,7 +1637,7 @@ Cannot add a length constraint on an axis! - Cannot add a length constraint on an axis! + Não é possível adicionar uma restrição de comprimento num eixo! @@ -1661,7 +1661,7 @@ Cannot add a horizontal length constraint on an axis! - Cannot add a horizontal length constraint on an axis! + Não é possível adicionar uma restrição de comprimento horizontal num eixo! Cannot add a fixed x-cootdinate constraint on an external geometry! @@ -1716,33 +1716,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. perpendicular constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. perpendicular constraint - + Select some geometry from the sketch. Wrong number of selected objects! perpendicular constraint - + Wrong number of selected objects! Error - + Erro With 3 objects, there must be 2 curves and 1 point. tangent constraint - + With 3 objects, there must be 2 curves and 1 point. @@ -1773,19 +1775,21 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. tangent constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. tangent constraint - + Select some geometry from the sketch. Wrong number of selected objects! tangent constraint - + Wrong number of selected objects! @@ -1847,7 +1851,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. - Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. + Selecione dois pontos e uma linha de simetria, dois pontos e um ponto de simetria ou uma linha e um ponto de simetria do esboço. @@ -1859,7 +1863,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Cannot add a symmetry constraint between a line and its end points! - Cannot add a symmetry constraint between a line and its end points! + Não é possível adicionar uma restrição de simetria entre uma linha e seus pontos extremos! Select exactly two same geometries @@ -1898,7 +1902,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Selecione exatamente duas entidades do esboço. - + Edit sketch Editar Esboço @@ -1970,39 +1974,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select at least two edges from the sketch. - + Select at least two edges from the sketch. One selected edge is not connectable - + One selected edge is not connectable Closing a shape formed by exactly two lines makes no sense. - + Closing a shape formed by exactly two lines makes no sense. Select elements from a single sketch. - + Select elements from a single sketch. No constraint selected - + No constraint selected At least one constraint must be selected - + At least one constraint must be selected - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. @@ -2060,7 +2064,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert angle - Insert angle + Inserir ângulo @@ -2072,26 +2076,26 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert radius - Insert radius + Inserir raio Refractive index ratio Constraint_SnellsLaw - + Refractive index ratio Ratio n2/n1: Constraint_SnellsLaw - + Ratio n2/n1: Change radius - + Change radius @@ -2103,18 +2107,18 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio - + Refractive index ratio Ratio n2/n1: - + Ratio n2/n1: Insert length - Insert length + Inserir comprimento @@ -2149,7 +2153,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unnamed - + Sem nome @@ -2200,7 +2204,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher colors - Sketcher colors + Cores da mesa de esboços @@ -2216,7 +2220,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Default vertex color - Default vertex color + Cor predefinida de vértices @@ -2269,11 +2273,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Constraint color - - - - Constrain color - Constrain color + Constraint color @@ -2290,7 +2290,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c The default line thickness for new shapes - The default line thickness for new shapes + Espessura de linha predefinida para novas formas @@ -2303,12 +2303,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Default vertex size - Default vertex size + Tamanho predefinido de vértice Default line width - Default line width + Largura predefinida de linha @@ -2339,7 +2339,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::SketcherValidation - + No missing coincidences No missing coincidences @@ -2361,21 +2361,87 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c No invalid constraints - + No invalid constraints No invalid constraints found - + No invalid constraints found Invalid constraints - + Invalid constraints Invalid constraints found + Invalid constraints found + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. @@ -2427,47 +2493,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Type: - + Tipo: Edge - + Borda Starting Point - + Starting Point End Point - + End Point Center Point - + Center Point Extended Naming - + Extended Naming Auto-switch to Edge - + Auto-switch to Edge <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> - + <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> Elements - + Elements @@ -2475,7 +2541,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Point - + Ponto @@ -2483,7 +2549,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - + Linha @@ -2491,7 +2557,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc - + Arco @@ -2499,19 +2565,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Circle - + Círculo Ellipse - + Elipse Elliptical Arc - + Elliptical Arc @@ -2519,7 +2585,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Other - + Other @@ -2539,10 +2605,6 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Grid size: Tamanho da grade: - - mm - mm - Grid snap @@ -2655,7 +2717,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher validation - + + Delete constraints to external geom. + + + + Missing coincidences Missing coincidences @@ -2664,22 +2731,48 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Tolerance: Tolerância: + + + Reversed external geometry + + + + + Swap endpoints in constraints + + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + Find Find - - + + Fix Fix - + Invalid constraints - + Invalid constraints @@ -2687,13 +2780,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid sketch - + Invalid sketch The sketch is invalid and cannot be edited. Use the sketch validation tool. - + The sketch is invalid and cannot be edited. +Use the sketch validation tool. @@ -2723,24 +2817,24 @@ Use the sketch validation tool. Over-constrained sketch - + Over-constrained sketch (click to select) - + (click to select) Sketch contains conflicting constraints - + Sketch contains conflicting constraints Sketch contains redundant constraints - + Sketch contains redundant constraints Over-constrained sketch @@ -2813,7 +2907,7 @@ Use the sketch validation tool. Create an arc of ellipse by its center, major radius, endpoints - + Create an arc of ellipse by its center, major radius, endpoints @@ -2831,7 +2925,7 @@ Use the sketch validation tool. Create a ellipse by periapsis, apoapsis, and minor radius - + Create a ellipse by periapsis, apoapsis, and minor radius @@ -2840,7 +2934,7 @@ Use the sketch validation tool. Create an ellipse by center, major radius and point - + Create an ellipse by center, major radius and point @@ -2849,7 +2943,7 @@ Use the sketch validation tool. Create a heptagon by its center and by one corner - + Create a heptagon by its center and by one corner @@ -2858,7 +2952,7 @@ Use the sketch validation tool. Create a hexagon by its center and by one corner - + Create a hexagon by its center and by one corner @@ -2867,7 +2961,7 @@ Use the sketch validation tool. Create an octagon by its center and by one corner - + Create an octagon by its center and by one corner @@ -2876,7 +2970,7 @@ Use the sketch validation tool. Create a pentagon by its center and by one corner - + Create a pentagon by its center and by one corner @@ -2885,7 +2979,7 @@ Use the sketch validation tool. Create a square by its center and by one corner - + Create a square by its center and by one corner @@ -2894,7 +2988,7 @@ Use the sketch validation tool. Create an equilateral triangle by its center and by one corner - + Create an equilateral triangle by its center and by one corner @@ -2966,7 +3060,7 @@ Do you want to detach it from the support? Sketcher tools - + Sketcher tools Sketcher geoms diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.qm index a8452f3fcd..924e0c50d6 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts index 50c0df3f39..dcb96acc37 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts @@ -11,12 +11,12 @@ Close Shape - + Închide forma Produce closed shape by Link end point of element with next elements' starting point - + Produce closed shape by Link end point of element with next elements' starting point @@ -34,7 +34,7 @@ Create an arc in the sketcher - Create an arc in the sketcher + Crearea unui arc de cerc în schiţă @@ -57,7 +57,7 @@ Create circle - Creaza cerc + Crează cerc @@ -85,27 +85,27 @@ Create a conic - + Create a conic Create a conic in the sketch - + Create a conic in the sketch Ellipse by center, major radius, point - + Ellipse by center, major radius, point Ellipse by Periapsis, apoapsis, minor radius - + Ellipse by Periapsis, apoapsis, minor radius Arc of ellipse by center, major radius, endpoints - + Arc of ellipse by center, major radius, endpoints @@ -118,42 +118,42 @@ Create regular polygon - + Creează poligon regulat Create an regular polygon in the sketcher - + Create an regular polygon in the sketcher Triangle - + Triunghi Square - + Pătrat Pentagon - + Pentagon Hexagon - + Hexagon Heptagon - + Heptagon Octagon - + Octogon @@ -166,12 +166,12 @@ Connect Edges - + Conectează marginile Link end point of element with next elements' starting point - + Link end point of element with next elements' starting point @@ -189,7 +189,7 @@ Fix the angle of a line or the angle between two lines - Repara unghiul unei drepte sau unghiul dintre doua linii + Repară unghiul unei drepte sau unghiul dintre două linii @@ -202,12 +202,12 @@ Constrain coincident - Constrangere coincidenta + Constrângere coincidentă Create a coincident constraint on the selected item - Creaza o constrangere coincidenta pe obiectul selectat + Crează o constrângere coincidentă pe obiectul selectat @@ -220,12 +220,12 @@ Constrain distance - Distanta constransa + Distanţă constrânsă Fix a length of a line or the distance between a line and a vertex - Bate in cuie lungimea unei linii sau distanta dintre o linie si un varf + Bate în cuie lungimea unei linii sau distanţa dintre o linie şi un vârf @@ -247,7 +247,7 @@ Fix the horizontal distance between two points or line ends - Bate in cuie distanta orizontala dintre doua puncte sau capete de linii + Bate în cuie distanţa orizontală dintre doua puncte sau capete de linii @@ -269,7 +269,7 @@ Fix the vertical distance between two points or line ends - Bate in cuie distanta verticala dintre doua puncte sau capete de linie + Bate în cuie distanţa verticală dintre două puncte sau capete de linie @@ -282,12 +282,12 @@ Constrain equal - Egalitate constransa + Egalitate constransă Create an equality constraint between two lines or between circles and arcs - Creaza o egalitate constransa intre doua linii, cercuri sau arce + Crează o egalitate constrânsă între două linii, cercuri sau arce @@ -300,12 +300,12 @@ Constrain horizontally - Constrangere orizontala + Constrângere orizontală Create a horizontal constraint on the selected item - Creaza o constrangere orizontala pentru obiectul selectat + Crează o constrângere orizontală pentru obiectul selectat @@ -318,12 +318,12 @@ Constrain InternalAlignment - + Constrain InternalAlignment Constrains an element to be aligned with the internal geometry of another element - + Constrains an element to be aligned with the internal geometry of another element @@ -336,12 +336,12 @@ Constrain lock - Constrangere fixa + Constrângere fixă Create a lock constraint on the selected item - Creaza o constrangere fixa pe obiectul selectat + Crează o constrângere fixă pe obiectul selectat @@ -354,12 +354,12 @@ Constrain parallel - Constrangere paralela + Constrângere paralelă Create a parallel constraint between two lines - Creaza o constrangere parala între două linii + Crează o constrângere paralelă între două linii @@ -372,12 +372,12 @@ Constrain perpendicular - Constrangere perpendiculara + Constrângere perpendiculară Create a perpendicular constraint between two lines - Create a perpendicular constraint between two lines + Crează o constrângere perpendiculară între două linii Create a Perpendicular constraint between two lines @@ -394,12 +394,12 @@ Constrain point onto object - Constrange punct pe obiect + Constrânge punct pe obiect Fix a point onto an object - Fixeaza un punct de un obiect + Fixează un punct de un obiect @@ -412,12 +412,12 @@ Constrain radius - Raza constransa + Rază constrânsă Fix the radius of a circle or an arc - Fixeaza raza unui cerc sau arc + Fixează raza unui cerc sau arc @@ -430,12 +430,12 @@ Constrain refraction (Snell's law') - + Constrain refraction (Snell's law') Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. @@ -448,7 +448,7 @@ Constrain symmetrical - Constrangere simetrica + Constrângere simetrică @@ -470,12 +470,12 @@ Constrain tangent - Constrange tangenta + Constrângere tangentă Create a tangent constraint between two entities - Creaza o constrangere tangenta intre doua entitati + Crează o constrângere tangentă între două entităţi @@ -488,12 +488,12 @@ Constrain vertically - Constrangere verticala + Constrângere verticală Create a vertical constraint on the selected item - Creaza o constrangere verticala pe obiectul selectat + Crează o constrângere verticală pe obiectul selectat @@ -506,12 +506,12 @@ Create arc by three points - Create arc by three points + Creaţi arc de trei puncte Create an arc by its end points and a point along the arc - Create an arc by its end points and a point along the arc + Creează un arc de la punctul său final și un punct de-a lungul arcului @@ -524,7 +524,7 @@ Create circle by three points - Create circle by three points + Creați cerc de trei puncte @@ -547,7 +547,7 @@ Create an arc by its center and by its end points - Create an arc by its center and by its end points + Creează un arc cu propiul centru și cu propiile puncte finale Create arc @@ -568,12 +568,12 @@ Create an arc of ellipse - + Create an arc of ellipse Create an arc of ellipse in the sketch - + Create an arc of ellipse in the sketch @@ -586,12 +586,12 @@ Create circle - Creaza cerc + Crează cerc Create a circle in the sketch - Creaza un cerc in schita + Crează un cerc în schiţă @@ -604,12 +604,12 @@ Create draft line - Creaza o linie de proiect + Crează o linie de proiect Create a draft line in the sketch - Creaza o linie de proiect in schita + Crează o linie de proiect în schiţă @@ -622,12 +622,12 @@ Create ellipse by 3 points - + Create ellipse by 3 points Create an ellipse by 3 points in the sketch - + Create an ellipse by 3 points in the sketch @@ -640,12 +640,12 @@ Create ellipse by center - + Create ellipse by center Create an ellipse by center in the sketch - + Create an ellipse by center in the sketch @@ -658,7 +658,7 @@ Create fillet - Creaza panglica + Crează panglică Create a fillet between two lines or at a coincidental point @@ -680,12 +680,12 @@ Create heptagon - + Creează heptagon Create a heptagon in the sketch - + Create a heptagon in the sketch @@ -698,12 +698,12 @@ Create hexagon - + Creează hexagon Create a hexagon in the sketch - + Create a hexagon in the sketch @@ -716,12 +716,12 @@ Create line - Creaza linie + Crează linie Create a line in the sketch - Creaza o linie in schita + Crează o linie în schiţă @@ -734,12 +734,12 @@ Create octagon - + Creează octogon Create an octagon in the sketch - + Create an octagon in the sketch @@ -752,12 +752,12 @@ Create pentagon - + Creează pentagon Create a pentagon in the sketch - + Create a pentagon in the sketch @@ -770,12 +770,12 @@ Create point - Creaza punct + Crează punct Create a point in the sketch - Creaza un punct in schita + Crează un punct în schiţă @@ -788,7 +788,7 @@ Create polyline - Creaza polilinie + Crează polilinie @@ -810,12 +810,12 @@ Create rectangle - Creaza dreptunghi + Crează dreptunghi Create a rectangle in the sketch - Creaza un dreptunghi in schita + Crează un dreptunghi în schiţă @@ -846,12 +846,12 @@ Create square - + Creează pătrat Create a square in the sketch - + Create a square in the sketch @@ -864,12 +864,12 @@ Create text - Creaza text + Crează text Create text in the sketch - Creaza text in schita + Crează text în schiţă @@ -882,12 +882,12 @@ Create equilateral triangle - + Creează triunghi echilateral Create an equilateral triangle in the sketch - + Create an equilateral triangle in the sketch @@ -900,12 +900,12 @@ Edit sketch - Editati schita + Editaţi schiţa Edit the selected sketch - + Edit the selected sketch @@ -918,12 +918,12 @@ External geometry - Geometrie externa + Geometrie externă Create an edge linked to an external geometry - Creaza o margine legata de o geometrie externa + Crează o muchie legată de o geometrie externă @@ -936,12 +936,12 @@ Leave sketch - Paraseste schita + Parăseşte schiţa Close the editing of the sketch - Termina editarea schitei + Termină editarea schiţei @@ -954,12 +954,12 @@ Map sketch to face... - Asociaza schita unei fete... + Asociază schiţa unei feţe... Map a sketch to a face - Aplica o chita pe o fata + Aplică o schiţa pe o faţă @@ -973,7 +973,7 @@ Merge sketches - + Combină schițe @@ -983,7 +983,7 @@ Select at least two sketches, please. - + Select at least two sketches, please. @@ -1051,12 +1051,12 @@ Show/hide internal geometry - + Show/hide internal geometry Show all internal geometry / hide unused internal geometry - + Show all internal geometry / hide unused internal geometry @@ -1070,7 +1070,7 @@ Select Conflicting Constraints - + Select Conflicting Constraints @@ -1083,12 +1083,12 @@ Select Constraints - + Selectaţi constrângeri Select the constraints associated to the selected elements - + Select the constraints associated to the selected elements @@ -1102,7 +1102,7 @@ Select Elements associated with constraints - + Select Elements associated with constraints @@ -1115,12 +1115,12 @@ Select Horizontal Axis - + Selectaţi axa orizontală Select the horizontal axis - + Selectaţi axa orizontală @@ -1133,12 +1133,12 @@ Select Origin - + Selectaţi originea Select the origin point - + Selectaţi punctul de origine @@ -1152,7 +1152,7 @@ Select Redundant Constraints - + Select Redundant Constraints @@ -1165,12 +1165,12 @@ Select Vertical Axis - + Selectare axă verticală Select the vertical axis - + Selectaţi axa verticală @@ -1223,12 +1223,12 @@ Validate sketch... - Validate sketch... + Validează schița... Validate sketch - Validate sketch + Validează schița @@ -1238,7 +1238,7 @@ Select one sketch, please. - Select one sketch, please. + Selectați o schiță. @@ -1352,7 +1352,7 @@ - + Wrong selection Selecţie greşită @@ -1387,7 +1387,7 @@ - + Impossible constraint Constrangere imposibila @@ -1458,120 +1458,120 @@ Cannot add a fixed x-coordinate constraint on an external geometry! - + Cannot add a fixed x-coordinate constraint on an external geometry! Cannot add a fixed x-coordinate constraint on the root point! - + Cannot add a fixed x-coordinate constraint on the root point! Cannot add a fixed y-coordinate constraint on an external geometry! - + Cannot add a fixed y-coordinate constraint on an external geometry! Cannot add a fixed y-coordinate constraint on the root point! - + Cannot add a fixed y-coordinate constraint on the root point! Select one or more arcs or circles from the sketch. - + Select one or more arcs or circles from the sketch. Constrain equal - Egalitate constransa + Egalitate constransă Do you want to share the same radius for all selected elements? - + Do you want to share the same radius for all selected elements? Select only entities from the sketch. - + Select only entities from the sketch. Select one or two lines from the sketch. Or select two edges and a point. - + Select one or two lines from the sketch. Or select two edges and a point. Parallel lines - + Linii paralele An angle constraint cannot be set for two parallel lines. - + An angle constraint cannot be set for two parallel lines. Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Selected objects are not just geometry from one sketch. - + Selected objects are not just geometry from one sketch. Number of selected objects is not 3 (is %1). - + Number of selected objects is not 3 (is %1). Incompatible geometry is selected! - + Incompatible geometry is selected! Select at least one ellipse and one edge from the sketch. - + Select at least one ellipse and one edge from the sketch. Sketch axes cannot be used in internal alignment constraint - + Sketch axes cannot be used in internal alignment constraint You can not internally constraint an ellipse on other ellipse. Select only one ellipse. - + You can not internally constraint an ellipse on other ellipse. Select only one ellipse. Maximum 2 points are supported. - + Maximum 2 points are supported. Maximum 2 lines are supported. - + Maximum 2 lines are supported. Nothing to constraint - + Nothing to constraint Currently all internal geometry of the ellipse is already exposed. - + Currently all internal geometry of the ellipse is already exposed. @@ -1579,39 +1579,39 @@ Extra elements - + Elemente suplimentare More elements than possible for the given ellipse were provided. These were ignored. - + More elements than possible for the given ellipse were provided. These were ignored. You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. - + You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Currently all internal geometry of the arc of ellipse is already exposed. - + Currently all internal geometry of the arc of ellipse is already exposed. More elements than possible for the given arc of ellipse were provided. These were ignored. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Select exactly two vertexes from the sketch. @@ -1708,7 +1708,7 @@ The selected edge is not a valid line - Marginea selectata nu este o linie valida + Marginea selectată nu este o linie validă @@ -1716,51 +1716,53 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. perpendicular constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. perpendicular constraint - + Select some geometry from the sketch. Wrong number of selected objects! perpendicular constraint - + Număr greșit al obiectelor selectate! Error - + Eroare With 3 objects, there must be 2 curves and 1 point. tangent constraint - + With 3 objects, there must be 2 curves and 1 point. Cannot add a perpendicularity constraint at an unconnected point! - Nu pot adauga o constrangere perpendiculara pentru un punct neconectat! + Nu pot adauga o constrângere perpendiculară pentru un punct neconectat! The selected points should be end points of arcs and lines. - Punctele selectate trebuie sa fie puncte de capat pentru arce sau linii. + Punctele selectate trebuie sa fie puncte de capăt pentru arce sau linii. The selected point should be an end point of an arc or line. - Punctul selectat trebuie sa fie punct de capat pentru arce sau linii. + Punctul selectat trebuie sa fie punct de capăt pentru arce sau linii. The selected edge should be an arc, line or circle. - Marginea selectata trebuie sa fie arc, linie sau cerc. + Marginea selectată trebuie sa fie arc, linie sau cerc. @@ -1773,73 +1775,75 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. tangent constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. tangent constraint - + Select some geometry from the sketch. Wrong number of selected objects! tangent constraint - + Număr greșit al obiectelor selectate! Cannot add a tangency constraint at an unconnected point! - Nu pot adauga constrangere tangentiala pentru un punct neconectat! + Nu pot adauga constrângere tangenţială pentru un punct neconectat! Select exactly one arc or circle from the sketch. - Selectati exact un arc sau un cerc din schita. + Selectaţi exact un arc sau un cerc din schiţă. Select one or two lines from the sketch. - Selectati una sau două linii din schita. + Selectaţi una sau două linii din schiţă. Cannot add an angle constraint on an external geometry! - Nu pot adauga o constrangere de unghi pentru o geometrie externa! + Nu pot adăuga o constrângere de unghi pentru o geometrie externă! Cannot add an angle constraint on an axis! - Nu pot adauga o constrangere de unghi pe o axa! + Nu pot adăuga o constrângere de unghi pe o axă! Select exactly one or two lines from the sketch. - Selectati exact una sau doua linii din schita. + Selectaţi exact una sau două linii din schiţă. Select two edges from the sketch. - Selectati doua margini din schita. + Selectaţi două margini din schiţă. Select atleast two lines from the sketch. - Selectati cel putin doua linii din schita. + Selectaţi cel puţin două linii din schiţă. Select two or more compatible edges - Selectati doua sau mai multe margini compatibile + Selectaţi două sau mai multe margini compatibile Sketch axes cannot be used in equality constraints - Axele schitei nu pot fi folosite in constrangeri de egalitate + Axele schiţei nu pot fi folosite în constrângeri de egalitate Select two or more edges of similar type - Selectati doua sau mai multe margini de acelasi tip + Selectaţi două sau mai multe margini de acelaşi tip @@ -1853,13 +1857,13 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Cannot add a constraint between external geometries! - Nu se poate adauga o constrangere intre geometrii externe! + Nu se poate adăuga o constrângere între geometrii externe! Cannot add a symmetry constraint between a line and its end points! - Nu se poate adauga o constrangere de simetrie intre o linie si punctele ei de capat! + Nu se poate adăuga o constrângere de simetrie între o linie şi punctele ei de capăt! Select exactly two same geometries @@ -1891,26 +1895,26 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select two entities from the sketch. - Selectati doua entitati din schita. + Selectaţi două entităţi din schiţă. Select exactly two entities from the sketch. - Selectati exact doua entitati din schita. + Selectaţi exact două entităţi din schiţă. - + Edit sketch - Editati schita + Editaţi schiţa A dialog is already open in the task panel - O fereastra de dialog este deja deschisa in fereastra de sarcini + O fereastră de dialog este deja deschisă în fereastra de sarcini Do you want to close this dialog? - Doriti sa inchideti aceasta fereastra de dialog? + Doriţi să închideţi această fereastră de dialog? @@ -1920,17 +1924,17 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c You have to select a single face as support for a sketch! - Ati selectat o singura fata ca si suport pentru schita! + Aţi selectat o singură faţă ca şi suport pentru schiţă! No support face selected - Nici o fata suport selectata + Nici o faţă suport selectată You have to select a face as support for a sketch! - Trebuie sa selectati o fata suport pentru schita! + Trebuie să selectaţi o faţă suport pentru schiţă! @@ -1940,24 +1944,24 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c You need a planar face as support for a sketch! - Schita necesita o fata plana ca si suport! + Schiţa necesită o faţă plană ca şi suport! Distance constraint - Constrangere distanta + Constrangere distanţa Not allowed to edit the datum because the sketch contains conflicting constraints - Nu este permisa editarea datum-ului pentru ca schita contine conflicte de constrangeri + Nu este permisă editarea datum-ului pentru ca schiţa conţine conflicte de constrângeri Dimensional constraint - Constrangere dimensionala + Constrângere dimensională @@ -1970,39 +1974,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select at least two edges from the sketch. - + Select at least two edges from the sketch. One selected edge is not connectable - + One selected edge is not connectable Closing a shape formed by exactly two lines makes no sense. - + Closing a shape formed by exactly two lines makes no sense. Select elements from a single sketch. - + Select elements from a single sketch. No constraint selected - + No constraint selected At least one constraint must be selected - + At least one constraint must be selected - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. @@ -2060,7 +2064,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert angle - Insert angle + Introdu unghi @@ -2079,19 +2083,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio Constraint_SnellsLaw - + Refractive index ratio Ratio n2/n1: Constraint_SnellsLaw - + Ratio n2/n1: Change radius - + Change radius @@ -2103,18 +2107,18 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio - + Refractive index ratio Ratio n2/n1: - + Ratio n2/n1: Insert length - Insert length + Introduceţi lungimea @@ -2149,7 +2153,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unnamed - + Nedenumit @@ -2247,7 +2251,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c External geometry - Geometrie externa + Geometrie externă @@ -2269,11 +2273,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Constraint color - - - - Constrain color - Constrain color + Constraint color @@ -2308,7 +2308,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Default line width - Default line width + Lățime implicită linie @@ -2323,7 +2323,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Font size - Font size + Dimensiunea fontului @@ -2339,7 +2339,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::SketcherValidation - + No missing coincidences No missing coincidences @@ -2351,7 +2351,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Missing coincidences - Missing coincidences + Lipsesc coincidente @@ -2361,21 +2361,87 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c No invalid constraints - + No invalid constraints No invalid constraints found - + No invalid constraints found Invalid constraints - + Invalid constraints Invalid constraints found + Invalid constraints found + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. @@ -2427,47 +2493,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Type: - + Tip: Edge - + Margine Starting Point - + Punct de plecare End Point - + Punct final Center Point - + Punct central Extended Naming - + Extended Naming Auto-switch to Edge - + Auto-switch to Edge <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> - + <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> Elements - + Elemente @@ -2475,7 +2541,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Point - + Punct @@ -2483,7 +2549,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - + Linie @@ -2491,7 +2557,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc - + Arc @@ -2499,19 +2565,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Circle - + Cerc Ellipse - + Elipsa Elliptical Arc - + Arc eliptic @@ -2519,7 +2585,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Other - + Altceva @@ -2532,21 +2598,17 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Show grid - Show grid + Arată grila Grid size: - Dimensiune grila: - - - mm - mm + Dimensiune grilă: Grid snap - Ancora la grila + Ancoră la grilă Unsolved @@ -2627,7 +2689,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Auto constraints - Constrangeri automate + Constrângeri automate auto constraints @@ -2655,31 +2717,62 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher validation - + + Delete constraints to external geom. + + + + Missing coincidences - Missing coincidences + Lipsesc coincidente Tolerance: - Tolerance: + Toleranţă: + + + + Reversed external geometry + + + + + Swap endpoints in constraints + - - Find - Find + Constraint orientation locking + - + + Enable/Update + + + + + Disable + + + + + + Find + Caută + + + + Fix Fix - + Invalid constraints - + Invalid constraints @@ -2687,33 +2780,34 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid sketch - + Schiță nevalidă The sketch is invalid and cannot be edited. Use the sketch validation tool. - + The sketch is invalid and cannot be edited. +Use the sketch validation tool. Please remove the following constraint: - Inlatura urmatoarea constrangere: + Înlătură urmatoarea constrângere: Please remove at least one of the following constraints: - Inlaturati cel putin una din urmatoarele constrangeri: + Înlaturaţi cel puţin una din urmatoarele constrângeri: Please remove the following redundant constraint: - Inlaturati urmatoarele constrangeri redundante: + Înlăturaţi urmatoarele constrângeri redundante: Please remove the following redundant constraints: - Inlaturati urmatoarele constrangeri redundante: + Înlăturaţi urmatoarele constrângeri redundante: @@ -2723,24 +2817,24 @@ Use the sketch validation tool. Over-constrained sketch - + Over-constrained sketch (click to select) - + (apăsați pentru selectare) Sketch contains conflicting constraints - + Sketch contains conflicting constraints Sketch contains redundant constraints - + Sketch contains redundant constraints Over-constrained sketch @@ -2786,7 +2880,7 @@ Use the sketch validation tool. Create an arc by its end points and a point along the arc - Create an arc by its end points and a point along the arc + Creează un arc de la punctul său final și un punct de-a lungul arcului @@ -2795,7 +2889,7 @@ Use the sketch validation tool. Create a circle by 3 rim points - Create a circle by 3 rim points + Creează un cerc cu 3 puncte pe circumferință @@ -2804,7 +2898,7 @@ Use the sketch validation tool. Create an arc by its center and by its end points - Create an arc by its center and by its end points + Creează un arc cu propiul centru și cu propiile puncte finale @@ -2813,7 +2907,7 @@ Use the sketch validation tool. Create an arc of ellipse by its center, major radius, endpoints - + Create an arc of ellipse by its center, major radius, endpoints @@ -2822,7 +2916,7 @@ Use the sketch validation tool. Create a circle by its center and by a rim point - Create a circle by its center and by a rim point + Creează un cerc cu centru propiu și cu un punct pe circumferință @@ -2831,7 +2925,7 @@ Use the sketch validation tool. Create a ellipse by periapsis, apoapsis, and minor radius - + Create a ellipse by periapsis, apoapsis, and minor radius @@ -2840,7 +2934,7 @@ Use the sketch validation tool. Create an ellipse by center, major radius and point - + Create an ellipse by center, major radius and point @@ -2849,7 +2943,7 @@ Use the sketch validation tool. Create a heptagon by its center and by one corner - + Create a heptagon by its center and by one corner @@ -2858,7 +2952,7 @@ Use the sketch validation tool. Create a hexagon by its center and by one corner - + Create a hexagon by its center and by one corner @@ -2867,7 +2961,7 @@ Use the sketch validation tool. Create an octagon by its center and by one corner - + Create an octagon by its center and by one corner @@ -2876,7 +2970,7 @@ Use the sketch validation tool. Create a pentagon by its center and by one corner - + Create a pentagon by its center and by one corner @@ -2885,7 +2979,7 @@ Use the sketch validation tool. Create a square by its center and by one corner - + Create a square by its center and by one corner @@ -2894,7 +2988,7 @@ Use the sketch validation tool. Create an equilateral triangle by its center and by one corner - + Create an equilateral triangle by its center and by one corner @@ -2902,14 +2996,14 @@ Use the sketch validation tool. Sketch has support - Sketch has support + Schița are suport Sketch with a support face cannot be reoriented. Do you want to detach it from the support? - Sketch with a support face cannot be reoriented. -Do you want to detach it from the support? + Schița cu o față suport nu se poate reorienta. +Doriți să fie detașată de suport? @@ -2966,7 +3060,7 @@ Do you want to detach it from the support? Sketcher tools - + Sketcher tools Sketcher geoms diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm index d7488c7c94..15aae401b3 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts index 0fc69269a3..1bf0670142 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts @@ -11,12 +11,12 @@ Close Shape - + Замкнуть Фигуру Produce closed shape by Link end point of element with next elements' starting point - + Замкнуть фигуру, соединив конечную точку элемента с начальной точкой следующего элемента @@ -34,17 +34,17 @@ Create an arc in the sketcher - Create an arc in the sketcher + Создать дугу в эскизе Center and end points - Center and end points + Центр и конечные точки End points and rim point - End points and rim point + По конечным и касательной @@ -62,17 +62,17 @@ Create a circle in the sketcher - Create a circle in the sketcher + Создать окружность в эскизе Center and rim point - Center and rim point + По центру и касательной 3 rim points - 3 rim points + По трём точкам @@ -85,27 +85,27 @@ Create a conic - + Создать конику Create a conic in the sketch - + Создать кривую конического сечения в эскизе Ellipse by center, major radius, point - + Эллипс (центр, большая полуось, точка) Ellipse by Periapsis, apoapsis, minor radius - + Эллипс по периапсиде, апоапсиде, малой полуоси Arc of ellipse by center, major radius, endpoints - + Дуга эллипса по центру, большой полуоси, концевым точкам @@ -118,42 +118,42 @@ Create regular polygon - + Начертить правильный многоугольник Create an regular polygon in the sketcher - + Начертить правильный многоугольник в эскизе Triangle - + Треугольник Square - + Квадрат Pentagon - + Пятиугольник Hexagon - + Шестиугольник Heptagon - + Семиугольник Octagon - + Восьмиугольник @@ -166,12 +166,12 @@ Connect Edges - + Соединить элементы Link end point of element with next elements' starting point - + Соединить конечную точку одного элемента с начальной точкой другого @@ -207,7 +207,7 @@ Create a coincident constraint on the selected item - Создать ограничение коинцидентности для выбранных элементов + Совметить точки, добавив ограничение коинцидентности @@ -225,7 +225,7 @@ Fix a length of a line or the distance between a line and a vertex - Зафиксировать длину линии или расстояние между линией и вершиной + Зафиксировать длину линии, расстояние между точками, или расстояние между линией и точкой @@ -305,7 +305,7 @@ Create a horizontal constraint on the selected item - Создание ограничения горизонтальности для выбранного элемента + Создать ограничение горизонтальности для выбранных линий @@ -318,12 +318,12 @@ Constrain InternalAlignment - + Привязать к внутренней геометрии Constrains an element to be aligned with the internal geometry of another element - + Привязать элемент к внутренней геометрии другого элемента @@ -336,12 +336,12 @@ Constrain lock - Ограничение блокировка + Ограничение положения Create a lock constraint on the selected item - Создать ограничение блокировки для выбранного элемента + Зафиксировать координаты выбранной точки @@ -359,7 +359,7 @@ Create a parallel constraint between two lines - Создание ограничения параллельности между двумя линиями + Создать ограничение параллельности между двумя линиями @@ -377,7 +377,7 @@ Create a perpendicular constraint between two lines - Create a perpendicular constraint between two lines + Создать ограничение перпендикулярности между двумя линиями Create a Perpendicular constraint between two lines @@ -430,12 +430,12 @@ Constrain refraction (Snell's law') - + Ограничение преломления (закон Снеллиуса) Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - + Создать ограничение по закону преломления (две конечные точки лучей и кривая в качестве границы раздела). @@ -453,7 +453,7 @@ Create a symmetry constraint between two points with respect to a line or a third point - Create a symmetry constraint between two points with respect to a line or a third point + Создать ограничение симметричности для двух точек относительно линии или третьей точки Create an symmetry constraint between two points with respect to a line @@ -475,7 +475,7 @@ Create a tangent constraint between two entities - Создание ограничения касательности между двумя объектами + Создать ограничение касательности между двумя объектами @@ -493,7 +493,7 @@ Create a vertical constraint on the selected item - Создание ограниченя вертикальности для выбранного элемента + Создать ограничение вертикальности для выделенных линий @@ -506,12 +506,12 @@ Create arc by three points - Create arc by three points + Создать дугу по трём точкам Create an arc by its end points and a point along the arc - Create an arc by its end points and a point along the arc + Создать дугу, указав её конечные точки и точку вдоль дуги @@ -524,12 +524,12 @@ Create circle by three points - Create circle by three points + Создать окружность по трём точкам Create a circle by 3 perimeter points - Create a circle by 3 perimeter points + Создать окружность по трём точкам @@ -542,12 +542,12 @@ Create arc by center - Create arc by center + Создать дугу по центру Create an arc by its center and by its end points - Create an arc by its center and by its end points + Создать дугу по её центру и её конечным точкам Create arc @@ -568,12 +568,12 @@ Create an arc of ellipse - + Начертить дугу эллипса Create an arc of ellipse in the sketch - + Начертить дугу эллипса в эскизе @@ -604,12 +604,12 @@ Create draft line - Создать вспомогательную линию + Создать draft линию Create a draft line in the sketch - Создать вспомогательную линию в эскизе + Создать draft линию в эскизе @@ -622,12 +622,12 @@ Create ellipse by 3 points - + Начертить эллипс по трём точкам Create an ellipse by 3 points in the sketch - + Начертить эллипс по трём точкам в эскизе @@ -640,12 +640,12 @@ Create ellipse by center - + Начертить эллипс по центру Create an ellipse by center in the sketch - + Начертить эллипс от центра в эскизе @@ -658,16 +658,16 @@ Create fillet - Создание скругления + Скруглить угол Create a fillet between two lines or at a coincidental point - Create a fillet between two lines or at a coincidental point + Скруглить угол между двумя линиями, или соединить две линии дугой окружности Create a fillet between two lines or at a coincident point - Create a fillet between two lines or at a coincident point + Скруглить угол между двумя линиями, или соединить две линии дугой окружности @@ -680,12 +680,12 @@ Create heptagon - + Начертить семиугольник Create a heptagon in the sketch - + Начертить семиугольник в эскизе @@ -698,12 +698,12 @@ Create hexagon - + Начертить шестиугольник Create a hexagon in the sketch - + Начертить шестиугольник в эскизе @@ -734,12 +734,12 @@ Create octagon - + Начертить восьмиугольник Create an octagon in the sketch - + Начертить восьмиугольник в эскизе @@ -752,12 +752,12 @@ Create pentagon - + Начертить пятиугольник Create a pentagon in the sketch - + Начертить пятиугольник в эскизе @@ -793,7 +793,7 @@ Create a polyline in the sketch. 'M' Key cycles behaviour - Create a polyline in the sketch. 'M' Key cycles behaviour + Создать полилинию в эскизе. 'M' - смена режима Create a polyline in the sketch @@ -828,12 +828,12 @@ Create slot - Create slot + Создать паз Create a slot in the sketch - Create a slot in the sketch + Создать паз на эскизе @@ -846,12 +846,12 @@ Create square - + Начертить квадрат Create a square in the sketch - + Начертить квадрат в эскизе @@ -882,12 +882,12 @@ Create equilateral triangle - + Начертить равносторонний треугольник Create an equilateral triangle in the sketch - + Начертить треугольник в эскизе @@ -905,7 +905,7 @@ Edit the selected sketch - + Изменить выбранный эскиз @@ -918,12 +918,12 @@ External geometry - Внешняя геометрия + Внешняя геометрия: Create an edge linked to an external geometry - Создать грань связную с внешней геометрией + Добавить геометрию извне @@ -954,12 +954,12 @@ Map sketch to face... - Спроецировать эскиз на грань... + Разместито эскиз на грани... Map a sketch to a face - Проекция эскиза на грань + Разместить эскиз на грани @@ -973,7 +973,7 @@ Merge sketches - + Объединить эскизы @@ -983,7 +983,7 @@ Select at least two sketches, please. - + Выберите хотя бы два эскиза. @@ -1000,7 +1000,7 @@ Create a new or edit the selected sketch - Создать новый или редактировать выбранный эскиз + Создать новый или изменить выбранный эскиз @@ -1033,12 +1033,12 @@ Reorient sketch... - Reorient sketch... + Переориентировать эскиз... Reorient the selected sketch - Reorient the selected sketch + Переориентировать выделенный эскиз @@ -1051,12 +1051,12 @@ Show/hide internal geometry - + Показать/скрыть внутреннюю геометрию Show all internal geometry / hide unused internal geometry - + Показать всю внутреннюю геометрию / спрятать неиспользуемую @@ -1070,7 +1070,7 @@ Select Conflicting Constraints - + Выделить конфликтующие ограничения @@ -1083,12 +1083,12 @@ Select Constraints - + Выделить ограничения Select the constraints associated to the selected elements - + Выделить ограничения, относящиеся к выделенной геометрии @@ -1102,7 +1102,7 @@ Select Elements associated with constraints - + Выделить элементы, связанные выделенными ограничениями @@ -1115,12 +1115,12 @@ Select Horizontal Axis - + Выделить горизональную ось Select the horizontal axis - + Выделить горизонтальную ось @@ -1133,12 +1133,12 @@ Select Origin - + Выделить начало координат Select the origin point - + Выделить точку начала координат @@ -1152,7 +1152,7 @@ Select Redundant Constraints - + Выделить избыточные ограничения @@ -1165,12 +1165,12 @@ Select Vertical Axis - + Выделить вертикальную ось Select the vertical axis - + Выделить вертикальную ось @@ -1183,12 +1183,12 @@ Toggle construction line - Переключение режима вспомогательной линии + Вспомогательный/Обычный Toggles the currently selected lines to/from construction mode - Переключение режима вспомогательной линии для выбранной геометрии + Переключение режима вспомогательности для выделенных элементов @@ -1201,12 +1201,12 @@ Trim edge - Обрезать кромку + Обрезать кривую Trim an edge with respect to the picked position - Обрезать край в отношении выбранной позиции + Удалить кусок линии/кривой до ближайшего пересечения Trims an edge with respect to the picked position @@ -1223,12 +1223,12 @@ Validate sketch... - Validate sketch... + Проверить эскиз... Validate sketch - Validate sketch + Проверить эскиз @@ -1238,7 +1238,7 @@ Select one sketch, please. - Select one sketch, please. + Выберите один эскиз, пожалуйста. @@ -1352,7 +1352,7 @@ - + Wrong selection Неправильный выбор @@ -1360,7 +1360,7 @@ Select edge(s) from the sketch. - Выберите кромку(и) из эскиза. + Выберите элементы из эскиза. @@ -1372,13 +1372,13 @@ Double constraint - Двойное ограничение + Избыточное ограничение The selected edge has already a horizontal constraint! - Выбранное ребро уже имеет ограничение горизонтальности! + Выбранная линия уже имеет ограничение горизонтальности! @@ -1387,7 +1387,7 @@ - + Impossible constraint Ограничение невозможно @@ -1395,7 +1395,7 @@ Cannot add a constraint between two external geometries! - Не удается наложить ограничение между двумя элементами внешней геометрии! + Невозможно накладывать ограничения между элементами геометрии извне. @@ -1413,7 +1413,7 @@ The selected edge is not a line segment - Выбранная кромка не является отрезком + Выбранный элемент не является линией @@ -1424,12 +1424,12 @@ The selected item(s) can't accept a horizontal constraint! - На выбранные элемент(ы) нельзя наложить горизонтальное ограничение! + На выбранные элемент(ы) нельзя наложить ограничение горизонтальности! The selected item(s) can't accept a vertical constraint! - На выбранные элемент(ы) нельзя наложить вертикальное ограничение! + На выбранные элемент(ы) нельзя наложить ограничение вертикальности! @@ -1444,7 +1444,7 @@ Select one vertex from the sketch. - Выбрать один конец линии в эскизе. + Должна быть выделена одна точка на эскизе. @@ -1453,34 +1453,34 @@ Select vertexes from the sketch. - Выберите вершины из эскиза. + Выберите точки на эскизе. Cannot add a fixed x-coordinate constraint on an external geometry! - + Ограничить X-координату элемента геометрии извне невозможно. Cannot add a fixed x-coordinate constraint on the root point! - + Ограничить X-координату точки начала координат невозможно. Cannot add a fixed y-coordinate constraint on an external geometry! - + Ограничить Y-координату элемента геометрии извне невозможно. Cannot add a fixed y-coordinate constraint on the root point! - + Ограничить Y-координату точки начала координат невозможно. Select one or more arcs or circles from the sketch. - + Сначала выделите одну или несколько окружностей или дуг окружности из эскиза. @@ -1490,88 +1490,88 @@ Do you want to share the same radius for all selected elements? - + Сделать ли радиусы всех выбранных окружностей и дуг равными? Select only entities from the sketch. - + Что-то должно быть выделено, причём только из данного эскиза. Select one or two lines from the sketch. Or select two edges and a point. - + Нужно выделить одну линию, или две линии, или две кривые и точку. Parallel lines - + Параллельные линии An angle constraint cannot be set for two parallel lines. - + Задать ограничение угла между параллельными линиями невозможно. Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Нужно выделить две концевые точки линий, выступающих в роли лучей, и кривую, в роли границы раздела. Точка, выбранная первой, соответствует лучу в среде с показателем преломления n1, выбранная второй - n2. Величина ограничения задаёт отношение n2/n1. Selected objects are not just geometry from one sketch. - + Выбранные объекты не являются только геометрией из одного эскиза. Number of selected objects is not 3 (is %1). - + Нужно выделить три объекта, а выделено %1. Incompatible geometry is selected! - + Выделенная комбинация непригодна для этого ограничения! Select at least one ellipse and one edge from the sketch. - + Выделите хотя бы один эллипс и одну линию из эскиза. Sketch axes cannot be used in internal alignment constraint - + Оси эскиза нельзя привязывать к внутренней геометрии You can not internally constraint an ellipse on other ellipse. Select only one ellipse. - + Выделено более одного эллипса. Должен быть выделен только один эллипс. Maximum 2 points are supported. - + К эллипсу можно привязать не более двух точек. Maximum 2 lines are supported. - + К эллипсу можно привязать не более двух линий. Nothing to constraint - + Занято Currently all internal geometry of the ellipse is already exposed. - + Вся внутренняя геометрия этого эллипса уже занята. @@ -1579,39 +1579,39 @@ Extra elements - + Слишком много элементов More elements than possible for the given ellipse were provided. These were ignored. - + Предоставлено больше элементов, чем осталось свободной внутренней геометрии. Лишние элементы были проигнорированы. You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. - + Выделено более одной дуги эллипса. Должна быть выделена максимум одна дуга эллипса. You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Привязать эллипс к внутренней геометрии дуги эллипса невозможно. В выделении может быть максимум один эллипс или максимум одна дуга эллипса. Currently all internal geometry of the arc of ellipse is already exposed. - + Вся внутренняя геометрия этой дуги эллипса уже занята. More elements than possible for the given arc of ellipse were provided. These were ignored. - + Предоставлено больше элементов, чем осталось свободной внутренней геометрии. Лишние элементы были проигнорированы. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Внутренняя геометрия доступна только для эллипсов и дуг эллипса. Эллипс/дуга эллипса должна быть выделена в последнюю очередь. Select exactly two vertexes from the sketch. @@ -1621,29 +1621,29 @@ Select two or more vertexes from the sketch. - Select two or more vertexes from the sketch. + Выделите две или более точек на эскизе. Select exactly one line or one point and one line or two points from the sketch. - Выберите или один отрезок, или одну точку и один отрезок, или две точки из эскиза. + Выделите либо один отрезок, либо точку и отрезок, либо две точки. Cannot add a length constraint on an external geometry! - Не удается наложить ограничение длины к внешней геометрии! + Нельзя наложить ограничение длины на геометрию извне! Cannot add a length constraint on an axis! - Не удается наложить ограничение длины на ось! + Нельзя наложить ограничение длины на ось! Select exactly one point and one object from the sketch. - Выберите одну точку и один объект эскиза. + Выберите одну точку и одну кривую из эскиза. @@ -1656,12 +1656,12 @@ Cannot add a horizontal length constraint on an external geometry! - Не удается наложить ограничение горизонтальный длины на внешнюю геометрию! + Нельзя наложить ограничение длины на геометрию извне. Cannot add a horizontal length constraint on an axis! - Не удается наложить ограничение горизонтальной длины на ось! + Нельзя наложить ограничение длины на ось! Cannot add a fixed x-cootdinate constraint on an external geometry! @@ -1674,12 +1674,12 @@ Cannot add a vertical length constraint on an external geometry! - Не удается наложить ограничение вертикальной длины к внешней геометрии! + Ограничить расстояние по вертикали геометрии извне невозможно! Cannot add a vertical length constraint on an axis! - Не удается наложить ограничение вертикальной длины на ось! + Нельзя наложить ограничение длины на ось! Cannot add a fixed y-cootdinate constraint on an external geometry! @@ -1687,7 +1687,7 @@ Cannot add a fixed y-cootdinate constraint on the root point! - Не удается добавить фиксированное ограничение по Y на опорной точке! + Не удается наложить ограничение фиксирования координаты Y на опорную точку! @@ -1698,17 +1698,17 @@ Select at least two lines from the sketch. - Выберите по крайней мере два отрезка из эскиза. + Нужно выделить как минимум две линии. Select a valid line - Выберите допустимый отрезок + Среди выделенных элементов должны быть только линии. The selected edge is not a valid line - Выбранная кромка не является допустимым отрезком + Среди выделенных элементов должны быть только линии. @@ -1716,39 +1716,41 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. perpendicular constraint - + Ограничение можно применить несколькими способами. + +Допустимы следующие комбинации: две кривые; концевая точка и кривая; две концевых точки; две кривых и точка. Select some geometry from the sketch. perpendicular constraint - + Выделите геометрические элементы на эскизе. Wrong number of selected objects! perpendicular constraint - + Неправильное количество выбранных объектов! Error - + Ошибка With 3 objects, there must be 2 curves and 1 point. tangent constraint - + Когда выбрано 3 элемента, это должны быть 2 кривые и одна точка. Cannot add a perpendicularity constraint at an unconnected point! - Не удается наложить ограничение перпендикулярности в несвязанной точке! + Не удаётся наложить ограничение перпендикулярности на точку, так как выделенная точка не является концом кривой. The selected points should be end points of arcs and lines. @@ -1765,7 +1767,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c One of the selected edges should be a line. - Одна из выбранных граней должна быть линией. + Один из выбранных элементов должен быть линией. @@ -1773,25 +1775,27 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. tangent constraint - + Ограничение можно применить несколькими способами. + +Допустимы следующие комбинации: две кривые; концевая точка и кривая; две концевых точки; две кривых и точка. Select some geometry from the sketch. tangent constraint - + Выделите геометрические элементы на эскизе. Wrong number of selected objects! tangent constraint - + Неправильное количество выбранных объектов! Cannot add a tangency constraint at an unconnected point! - Не удается наложить ограничение касания в несвязанной точке! + Не удаётся наложить ограничение касательности на точку, так как выделенная точка не является концом кривой. Select exactly one arc or circle from the sketch. @@ -1804,12 +1808,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Cannot add an angle constraint on an external geometry! - Не удается наложить ограничение на угол к внешней геометрии! + Невозможно накладывать ограничения между элементами геометрии извне. Cannot add an angle constraint on an axis! - Не удается наложить ограничение угла на ось! + Наложить ограничение угла на ось невозможно! Select exactly one or two lines from the sketch. @@ -1828,7 +1832,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select two or more compatible edges - Выбрать две или более совместимых граней + Выделите два или более элементов. Можно выбрать либо набор линий, либо набор окружностей и их дуг, либо набор эллипсов и их дуг. @@ -1847,19 +1851,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. - Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. + Выделите две точки и линию симметрии, либо две точки и точку симметрии, либо линию и точку симметрии. Cannot add a constraint between external geometries! - Не удается наложить ограничение между двумя элементами внешней геометрии! + Невозможно накладывать ограничения между элементами геометрии извне. Cannot add a symmetry constraint between a line and its end points! - Не удается добавить ограничение симметрии между линией и ее конечными точками! + Не удается добавить ограничение симметрии, так как обе точки являются концами линии, задающей ось симметрии. Select exactly two same geometries @@ -1898,7 +1902,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Выберите два объекта эскиза. - + Edit sketch Редактировать эскиз @@ -1915,17 +1919,17 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Several sub-elements selected - Несколько вложенных деталей выбрано + Неправильное выделение You have to select a single face as support for a sketch! - Вы должны выбрать одну поверхность, как основу для эскиза! + Вы должны выбрать одну плоскую грань в качестве основы для эскиза! No support face selected - Нет поддержки выбранной поверхности + Не выбрана грань @@ -1935,12 +1939,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c No planar support - Нет поддержки плоскостей + Неплоская грань You need a planar face as support for a sketch! - Вам нужна плоская поверхность для создания эскиза! + Для создания эскиза, грань должна быть плоской. Выбранная грань неплоская. @@ -1950,14 +1954,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Not allowed to edit the datum because the sketch contains conflicting constraints - Не разрешается редактировать значение из-за конфликта условий + Не разрешается редактировать значение из-за конфликта ограничений Dimensional constraint - Ограничение размерами + Размерное ограничение @@ -1970,39 +1974,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select at least two edges from the sketch. - + Нужно выделить как минимум два элемента из эскиза. One selected edge is not connectable - + Какой-то из выделенных элементов не имеет концевых точек. Closing a shape formed by exactly two lines makes no sense. - + Вы пытаетесь сделать двухугольник! Select elements from a single sketch. - + Выделите элементы из одного эскиза. No constraint selected - + Не выделено ограничений At least one constraint must be selected - + Должно быть выделено хотя бы одно ограничение. - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Внутренняя геометрия доступна только для эллипсов и дуг эллипса. Эллипс/дуга эллипса должна быть выделена в последнюю очередь. @@ -2060,7 +2064,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert angle - Insert angle + Введите угол @@ -2072,26 +2076,26 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert radius - Insert radius + Введите радиус Refractive index ratio Constraint_SnellsLaw - + Отношение показателей преломления Ratio n2/n1: Constraint_SnellsLaw - + Отношение n2/n1: Change radius - + Изменить радиус @@ -2103,18 +2107,18 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio - + Отношение показателей преломления Ratio n2/n1: - + Отношение n2/n1: Insert length - Insert length + Введите длинну @@ -2136,12 +2140,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert datum - Вставьте вспомогательный элемент + Введите величину datum: - Вспомогательный: + Величина: @@ -2149,7 +2153,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unnamed - + Unnamed @@ -2200,39 +2204,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher colors - Sketcher colors + Цвета эскиза Default edge color - Default edge color + Стандартный цвет линий The color of edges being edited - The color of edges being edited + Цвет линий и кривых во время редактирования Default vertex color - Default vertex color + Цвет вершины по умолчанию The color of vertices being edited - The color of vertices being edited + Цвет точек во время редактирования Edit edge color - Edit edge color + цвет ребра в режиме редактирогвания Edit vertex color - Edit vertex color + Цвет вершины в режиме редактирования @@ -2242,55 +2246,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c The color of construction geometry in edit mode - The color of construction geometry in edit mode + Цвет вспомогательной геометрии External geometry - Внешняя геометрия + Внешняя геометрия: The color of external geometry in edit mode - The color of external geometry in edit mode + Цвет внешней геометрии в режиме редактирования Fully constrained geometry - Fully constrained geometry + Зафиксированная ограничениями геометрия The color of fully constrained geometry in edit mode - The color of fully constrained geometry in edit mode + Цвет геометрии, полностью зафиксированной наложенными ограничениями Constraint color - - - - Constrain color - Constrain color + Цвет ограничения Datum color - Datum color + Цвет подписей Datum text size - Datum text size + Размер текста подписей The default line thickness for new shapes - Толщина линии по умолчанию для новой формы + Толщина линии по умолчанию для новых деталей @@ -2303,79 +2303,145 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Default vertex size - Default vertex size + Размер вершины Default line width - Default line width + Ширина линии по умолчанию Cursor text color - Cursor text color + Цвет текста координат курсора Sketch editing - Sketch editing + Редактирование эскиза Font size - Font size + Размер шрифта Grid line pattern - Grid line pattern + Стиль линии сетки Ask for value after creating a distance constraint - Ask for value after creating a distance constraint + Спрашивать значение при создании ограничения расстояния SketcherGui::SketcherValidation - + No missing coincidences - No missing coincidences + Недостающих стыков нет No missing coincidences found - No missing coincidences found + Недостающих ограничений коинцидентности не найдено Missing coincidences - Missing coincidences + Пропущенные коинцидентности %1 missing coincidences found - %1 missing coincidences found + Недостающих ограничений коинцидентности: %1 No invalid constraints - + Неисправных ограничений нет No invalid constraints found - + Неисправных ограничений не найдено Invalid constraints - + Неисправные ограничения Invalid constraints found + Обнаружены неисправные ограничения + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. @@ -2399,17 +2465,17 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Normal - Нормальный + Обычные Datums - Геодезические + С величиной Named - Поименованый + С названием @@ -2427,47 +2493,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Type: - + Тип: Edge - + Грань Starting Point - + Начальная точка End Point - + Конечная точка Center Point - + Центральная точка Extended Naming - + Подробное именование Auto-switch to Edge - + Автоматически переключаться на рёбра <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> - + <html><head/><body><p>&quot;Ctrl&quot;: множественное выделение</p><p>&quot;Z&quot;: перейти к следующему корректному типу</p></body></html> Elements - + Элементы @@ -2475,7 +2541,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Point - + Точка @@ -2483,7 +2549,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - + Линия @@ -2491,7 +2557,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc - + Дуга @@ -2499,19 +2565,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Circle - + Окружность Ellipse - + Эллипс Elliptical Arc - + Дуга эллипса @@ -2519,7 +2585,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Other - + Нечто @@ -2532,16 +2598,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Show grid - Show grid + Показывать сетку Grid size: - Размер сетки: - - - mm - мм + Шаг сетки: @@ -2627,7 +2689,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Auto constraints - Автоматические условия + Автомат. ограничения auto constraints @@ -2644,7 +2706,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Solver messages - Сообщения решателя + Состояние эскиза @@ -2652,34 +2714,65 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher validation - Sketcher validation + Проверка эскиза - + + Delete constraints to external geom. + + + + Missing coincidences - Missing coincidences + Пропущенные коинцидентности Tolerance: Tolerance: + + + Reversed external geometry + + + + + Swap endpoints in constraints + + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + Find - Find + Найти - - + + Fix - Fix + Исправить - + Invalid constraints - + Неисправные ограничения @@ -2687,13 +2780,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid sketch - + Эскиз повреждён The sketch is invalid and cannot be edited. Use the sketch validation tool. - + Не удаётся открыть эскиз для редактирования, так как он неисправен. +Отремонтировать его можно с помощью инструмента "Проверка эскиза". @@ -2723,24 +2817,24 @@ Use the sketch validation tool. Over-constrained sketch - + Чрезмерно ограниченный эскиз (click to select) - + (выделить) Sketch contains conflicting constraints - + Эскиз с конфликтующими ограничениями Sketch contains redundant constraints - + Эскиз с избыточными ограничениями Over-constrained sketch @@ -2767,17 +2861,17 @@ Use the sketch validation tool. Under-constrained sketch with %1 degrees of freedom - Эскиз содержит степени свободы в количестве равном %1 + Частично ограниченный эскиз (%1 степеней свободы) Solved in %1 sec - Решено через %1 сек + Обсчитан за %1 сек Unsolved (%1 sec) - Нерешено (%1 сек) + Не решается (%1 сек) @@ -2786,7 +2880,7 @@ Use the sketch validation tool. Create an arc by its end points and a point along the arc - Create an arc by its end points and a point along the arc + Создать дугу, указав её конечные точки и точку вдоль дуги @@ -2795,7 +2889,7 @@ Use the sketch validation tool. Create a circle by 3 rim points - Create a circle by 3 rim points + Создать окружность, проходящую через три точки @@ -2804,7 +2898,7 @@ Use the sketch validation tool. Create an arc by its center and by its end points - Create an arc by its center and by its end points + Создать дугу по её центру и её конечным точкам @@ -2813,7 +2907,7 @@ Use the sketch validation tool. Create an arc of ellipse by its center, major radius, endpoints - + Создать дугу эллипса по центру, большому радиусу и концевым точкам @@ -2822,7 +2916,7 @@ Use the sketch validation tool. Create a circle by its center and by a rim point - Create a circle by its center and by a rim point + Создать круг, используя его центр и периферийную точку @@ -2831,7 +2925,7 @@ Use the sketch validation tool. Create a ellipse by periapsis, apoapsis, and minor radius - + Создать дугу эллипса по большому диаметру и точке @@ -2840,7 +2934,7 @@ Use the sketch validation tool. Create an ellipse by center, major radius and point - + Создать эллипс по центру и двум радиусам @@ -2849,7 +2943,7 @@ Use the sketch validation tool. Create a heptagon by its center and by one corner - + Создать правильный семиугольник @@ -2858,7 +2952,7 @@ Use the sketch validation tool. Create a hexagon by its center and by one corner - + Создать правильный шестиугольник @@ -2867,7 +2961,7 @@ Use the sketch validation tool. Create an octagon by its center and by one corner - + Создать правильный восьмиугольник @@ -2876,7 +2970,7 @@ Use the sketch validation tool. Create a pentagon by its center and by one corner - + Создать правильный пятиугольник @@ -2885,7 +2979,7 @@ Use the sketch validation tool. Create a square by its center and by one corner - + Создать квадрат @@ -2894,7 +2988,7 @@ Use the sketch validation tool. Create an equilateral triangle by its center and by one corner - + Создать правильный треугольник @@ -2902,14 +2996,13 @@ Use the sketch validation tool. Sketch has support - Sketch has support + Эскиз имеет основание Sketch with a support face cannot be reoriented. Do you want to detach it from the support? - Sketch with a support face cannot be reoriented. -Do you want to detach it from the support? + Эскиз с опорной поверхностью не может быть переориентирован. Вы хотите отсоединить его от основания? @@ -2948,7 +3041,7 @@ Do you want to detach it from the support? Not solved yet - Пока еще не решено + Ещё не обсчитывался @@ -2966,7 +3059,7 @@ Do you want to detach it from the support? Sketcher tools - + Инструменты для эскиза Sketcher geoms diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sk.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sk.ts index 8899d0838b..a40137a4ab 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sk.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sk.ts @@ -1352,7 +1352,7 @@ - + Wrong selection Chybný výber @@ -1387,7 +1387,7 @@ - + Impossible constraint Obmedzenie nie je možné @@ -1898,7 +1898,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select exactly two entities from the sketch. - + Edit sketch Upraviť náčrt @@ -2000,7 +2000,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. @@ -2339,7 +2339,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::SketcherValidation - + No missing coincidences No missing coincidences @@ -2378,6 +2378,72 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid constraints found + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. + + SketcherGui::TaskSketcherConstrains @@ -2655,7 +2721,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher validation - + + Delete constraints to external geom. + + + + Missing coincidences Missing coincidences @@ -2664,20 +2735,46 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Tolerance: Tolerance: + + + Reversed external geometry + + + + + Swap endpoints in constraints + + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + Find Find - - + + Fix Fix - + Invalid constraints diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.qm new file mode 100644 index 0000000000..febaeeac83 Binary files /dev/null and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.ts new file mode 100644 index 0000000000..84a56696b9 --- /dev/null +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sr.ts @@ -0,0 +1,3075 @@ + + + + + CmdSketcherCloseShape + + + Sketcher + Sketcher + + + + Close Shape + Затвори Облик + + + + Produce closed shape by Link end point of element with next elements' starting point + Направи затворен облик спајањем крајње тачке елемента са почетном тачком следећег елемента + + + + CmdSketcherCompCreateArc + + + Sketcher + Sketcher + + + + Create arc + Create arc + + + + Create an arc in the sketcher + Нацртај лук у cкицеру + + + + Center and end points + Центар и крајње тачке + + + + End points and rim point + Крајње тачке и тачка на ободу + + + + CmdSketcherCompCreateCircle + + + Sketcher + Sketcher + + + + Create circle + Нацртај круг + + + + Create a circle in the sketcher + Нацртај круг у cкицеру + + + + Center and rim point + Центар и тачка на ободу + + + + 3 rim points + 3 тачке на ободу + + + + CmdSketcherCompCreateConic + + + Sketcher + Sketcher + + + + Create a conic + Креирај конуcни + + + + Create a conic in the sketch + Create a conic in the sketch + + + + Ellipse by center, major radius, point + Ellipse by center, major radius, point + + + + Ellipse by Periapsis, apoapsis, minor radius + Ellipse by Periapsis, apoapsis, minor radius + + + + Arc of ellipse by center, major radius, endpoints + Arc of ellipse by center, major radius, endpoints + + + + CmdSketcherCompCreateRegularPolygon + + + Sketcher + Sketcher + + + + Create regular polygon + Create regular polygon + + + + Create an regular polygon in the sketcher + Create an regular polygon in the sketcher + + + + Triangle + Троугао + + + + Square + Квадрат + + + + Pentagon + Пентагон + + + + Hexagon + Хекcагон + + + + Heptagon + Хептагон + + + + Octagon + Октагон + + + + CmdSketcherConnect + + + Sketcher + Sketcher + + + + Connect Edges + Споји Рубове + + + + Link end point of element with next elements' starting point + Повежи крајњу тачку елемента са почетном тачком следећег елемента + + + + CmdSketcherConstrainAngle + + + Sketcher + Sketcher + + + + Constrain angle + Ограничи угао + + + + Fix the angle of a line or the angle between two lines + Фикcирај угао линије,или угао између две линије + + + + CmdSketcherConstrainCoincident + + + Sketcher + Sketcher + + + + Constrain coincident + Constrain coincident + + + + Create a coincident constraint on the selected item + Create a coincident constraint on the selected item + + + + CmdSketcherConstrainDistance + + + Sketcher + Sketcher + + + + Constrain distance + Ограничи удаљеноcт + + + + Fix a length of a line or the distance between a line and a vertex + Fix a length of a line or the distance between a line and a vertex + + + + CmdSketcherConstrainDistanceX + + + Sketcher + Sketcher + + + + Constrain horizontal distance + Constrain horizontal distance + + + Constrain vertical distance + Constrain vertical distance + + + + Fix the horizontal distance between two points or line ends + Фикcирај хоризонталну удаљеноcт између две тачке,или крајеве линија + + + + CmdSketcherConstrainDistanceY + + + Sketcher + Sketcher + + + + Constrain vertical distance + Constrain vertical distance + + + Constrain horizontal distance + Constrain horizontal distance + + + + Fix the vertical distance between two points or line ends + Фикcирај вертикалну удаљеноcт између две тачке,или крајеве линија + + + + CmdSketcherConstrainEqual + + + Sketcher + Sketcher + + + + Constrain equal + Constrain equal + + + + Create an equality constraint between two lines or between circles and arcs + Create an equality constraint between two lines or between circles and arcs + + + + CmdSketcherConstrainHorizontal + + + Sketcher + Sketcher + + + + Constrain horizontally + Ограничи хоризонтално + + + + Create a horizontal constraint on the selected item + Направи хоризонтално ограничење на изабраном предмету + + + + CmdSketcherConstrainInternalAlignment + + + Sketcher + Sketcher + + + + Constrain InternalAlignment + Constrain InternalAlignment + + + + Constrains an element to be aligned with the internal geometry of another element + Constrains an element to be aligned with the internal geometry of another element + + + + CmdSketcherConstrainLock + + + Sketcher + Sketcher + + + + Constrain lock + Constrain lock + + + + Create a lock constraint on the selected item + Направи закључано ограничење на изабраном предмету + + + + CmdSketcherConstrainParallel + + + Sketcher + Sketcher + + + + Constrain parallel + Ограничи паралелно + + + + Create a parallel constraint between two lines + Направи паралелно ограничење између две линије + + + + CmdSketcherConstrainPerpendicular + + + Sketcher + Sketcher + + + + Constrain perpendicular + Constrain perpendicular + + + + Create a perpendicular constraint between two lines + Create a perpendicular constraint between two lines + + + Create a Perpendicular constraint between two lines + Create a Perpendicular constraint between two lines + + + + CmdSketcherConstrainPointOnObject + + + Sketcher + Sketcher + + + + Constrain point onto object + Constrain point onto object + + + + Fix a point onto an object + Фикcирај тачку на објекат + + + + CmdSketcherConstrainRadius + + + Sketcher + Sketcher + + + + Constrain radius + Ограничи полупречник + + + + Fix the radius of a circle or an arc + Фиксирај полупречник круга,или лука + + + + CmdSketcherConstrainSnellsLaw + + + Sketcher + Sketcher + + + + Constrain refraction (Snell's law') + Constrain refraction (Snell's law') + + + + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. + + + + CmdSketcherConstrainSymmetric + + + Sketcher + Sketcher + + + + Constrain symmetrical + Ограничи cиметрично + + + + Create a symmetry constraint between two points with respect to a line or a third point + Направи cиметрично ограничење између две тачке у одноcу cа линијом,или трећом тачком + + + Create an symmetry constraint between two points with respect to a line + Create an symmetry constraint between two points with respect to a line + + + + CmdSketcherConstrainTangent + + + Sketcher + Sketcher + + + + Constrain tangent + Constrain tangent + + + + Create a tangent constraint between two entities + Create a tangent constraint between two entities + + + + CmdSketcherConstrainVertical + + + Sketcher + Sketcher + + + + Constrain vertically + Ограничи вертикално + + + + Create a vertical constraint on the selected item + Направи вертикално ограничење на изабраном предмету + + + + CmdSketcherCreate3PointArc + + + Sketcher + Sketcher + + + + Create arc by three points + Нацртај лук cа три тачке + + + + Create an arc by its end points and a point along the arc + Create an arc by its end points and a point along the arc + + + + CmdSketcherCreate3PointCircle + + + Sketcher + Sketcher + + + + Create circle by three points + Нацртај круг cа три тачке + + + + Create a circle by 3 perimeter points + Create a circle by 3 perimeter points + + + + CmdSketcherCreateArc + + + Sketcher + Sketcher + + + + Create arc by center + Create arc by center + + + + Create an arc by its center and by its end points + Create an arc by its center and by its end points + + + Create arc + Create arc + + + Create an arc in the sketch + Create an arc in the sketch + + + + CmdSketcherCreateArcOfEllipse + + + Sketcher + Sketcher + + + + Create an arc of ellipse + Create an arc of ellipse + + + + Create an arc of ellipse in the sketch + Create an arc of ellipse in the sketch + + + + CmdSketcherCreateCircle + + + Sketcher + Sketcher + + + + Create circle + Нацртај круг + + + + Create a circle in the sketch + Нацртај круг у cкици + + + + CmdSketcherCreateDraftLine + + + Sketcher + Sketcher + + + + Create draft line + Create draft line + + + + Create a draft line in the sketch + Create a draft line in the sketch + + + + CmdSketcherCreateEllipseBy3Points + + + Sketcher + Sketcher + + + + Create ellipse by 3 points + Create ellipse by 3 points + + + + Create an ellipse by 3 points in the sketch + Create an ellipse by 3 points in the sketch + + + + CmdSketcherCreateEllipseByCenter + + + Sketcher + Sketcher + + + + Create ellipse by center + Create ellipse by center + + + + Create an ellipse by center in the sketch + Create an ellipse by center in the sketch + + + + CmdSketcherCreateFillet + + + Sketcher + Sketcher + + + + Create fillet + Направи заобљење + + + Create a fillet between two lines or at a coincidental point + Create a fillet between two lines or at a coincidental point + + + + Create a fillet between two lines or at a coincident point + Create a fillet between two lines or at a coincident point + + + + CmdSketcherCreateHeptagon + + + Sketcher + Sketcher + + + + Create heptagon + Create heptagon + + + + Create a heptagon in the sketch + Create a heptagon in the sketch + + + + CmdSketcherCreateHexagon + + + Sketcher + Sketcher + + + + Create hexagon + Create hexagon + + + + Create a hexagon in the sketch + Create a hexagon in the sketch + + + + CmdSketcherCreateLine + + + Sketcher + Sketcher + + + + Create line + Нацртај линију + + + + Create a line in the sketch + Нацртај линију у cкици + + + + CmdSketcherCreateOctagon + + + Sketcher + Sketcher + + + + Create octagon + Create octagon + + + + Create an octagon in the sketch + Create an octagon in the sketch + + + + CmdSketcherCreatePentagon + + + Sketcher + Sketcher + + + + Create pentagon + Create pentagon + + + + Create a pentagon in the sketch + Create a pentagon in the sketch + + + + CmdSketcherCreatePoint + + + Sketcher + Sketcher + + + + Create point + Нацртај тачку + + + + Create a point in the sketch + Нацртај тачку у cкици + + + + CmdSketcherCreatePolyline + + + Sketcher + Sketcher + + + + Create polyline + Create polyline + + + + Create a polyline in the sketch. 'M' Key cycles behaviour + Create a polyline in the sketch. 'M' Key cycles behaviour + + + Create a polyline in the sketch + Create a polyline in the sketch + + + + CmdSketcherCreateRectangle + + + Sketcher + Sketcher + + + + Create rectangle + Create rectangle + + + + Create a rectangle in the sketch + Create a rectangle in the sketch + + + + CmdSketcherCreateSlot + + + Sketcher + Sketcher + + + + Create slot + Create slot + + + + Create a slot in the sketch + Create a slot in the sketch + + + + CmdSketcherCreateSquare + + + Sketcher + Sketcher + + + + Create square + Create square + + + + Create a square in the sketch + Create a square in the sketch + + + + CmdSketcherCreateText + + + Sketcher + Sketcher + + + + Create text + Направи текcт + + + + Create text in the sketch + Направи текcт у cкици + + + + CmdSketcherCreateTriangle + + + Sketcher + Sketcher + + + + Create equilateral triangle + Create equilateral triangle + + + + Create an equilateral triangle in the sketch + Create an equilateral triangle in the sketch + + + + CmdSketcherEditSketch + + + Sketcher + Sketcher + + + + Edit sketch + Измени скицу + + + + Edit the selected sketch + Уреди одабрану cкицу + + + + CmdSketcherExternal + + + Sketcher + Sketcher + + + + External geometry + Спољна геометрија + + + + Create an edge linked to an external geometry + Креирај руб повезан cа cпољном геометријом + + + + CmdSketcherLeaveSketch + + + Sketcher + Sketcher + + + + Leave sketch + Напуcти cкицу + + + + Close the editing of the sketch + Затвори измене cкице + + + + CmdSketcherMapSketch + + + Sketcher + Sketcher + + + + Map sketch to face... + Мапира cкицу на површ... + + + + Map a sketch to a face + Мапирај cкицу на површ + + + + CmdSketcherMergeSketches + + + Sketcher + Sketcher + + + + + Merge sketches + Cпоји cкице + + + + Wrong selection + Погрешан избор + + + + Select at least two sketches, please. + Молим одаберите најмање две cкице. + + + + CmdSketcherNewSketch + + + Sketcher + Sketcher + + + + Create sketch + Направи скицу + + + Create a new or edit the selected sketch + Направи нову,или измени изабрану скицу + + + + Create a new sketch + Create a new sketch + + + + CmdSketcherNewSketchSF + + Sketcher + Sketcher + + + Sketchflat sketch + Sketchflat sketch + + + Create a new sketchflat sketch by starting externel editor + Create a new sketchflat sketch by starting externel editor + + + + CmdSketcherReorientSketch + + + Sketcher + Sketcher + + + + Reorient sketch... + Преорјентиши скицу... + + + + Reorient the selected sketch + Преорјентиши изабрану скицу + + + + CmdSketcherRestoreInternalAlignmentGeometry + + + Sketcher + Sketcher + + + + Show/hide internal geometry + Прикажи/cакриј унутрашњу геометрију + + + + Show all internal geometry / hide unused internal geometry + Прикажи cву унутрашњу геометрију / cакриј некориштену унутрашњу геометрију + + + + CmdSketcherSelectConflictingConstraints + + + Sketcher + Sketcher + + + + + Select Conflicting Constraints + Одабери Cукобљена Ограничења + + + + CmdSketcherSelectConstraints + + + Sketcher + Sketcher + + + + Select Constraints + Одабери Ограничења + + + + Select the constraints associated to the selected elements + Одабери ограничења повезана cа изабраним елементима + + + + CmdSketcherSelectElementsAssociatedWithConstraints + + + Sketcher + Sketcher + + + + + Select Elements associated with constraints + Одабери Елементе који cу повезани cа ограничењима + + + + CmdSketcherSelectHorizontalAxis + + + Sketcher + Sketcher + + + + Select Horizontal Axis + Одабери Хоризонталне Оcе + + + + Select the horizontal axis + Одабери хоризонталне оcе + + + + CmdSketcherSelectOrigin + + + Sketcher + Sketcher + + + + Select Origin + Select Origin + + + + Select the origin point + Select the origin point + + + + CmdSketcherSelectRedundantConstraints + + + Sketcher + Sketcher + + + + + Select Redundant Constraints + Обележи Cувишна Ограничења + + + + CmdSketcherSelectVerticalAxis + + + Sketcher + Sketcher + + + + Select Vertical Axis + Одабери Вертикалне Оcе + + + + Select the vertical axis + Одабери вертикалне оcе + + + + CmdSketcherToggleConstruction + + + Sketcher + Sketcher + + + + Toggle construction line + Toggle construction line + + + + Toggles the currently selected lines to/from construction mode + Toggles the currently selected lines to/from construction mode + + + + CmdSketcherTrimming + + + Sketcher + Sketcher + + + + Trim edge + Cкрати руб + + + + Trim an edge with respect to the picked position + Trim an edge with respect to the picked position + + + Trims an edge with respect to the picked position + Trims an edge with respect to the picked position + + + + CmdSketcherValidateSketch + + + Sketcher + Sketcher + + + + Validate sketch... + Validate sketch... + + + + Validate sketch + Потврди cкицу + + + + Wrong selection + Погрешан избор + + + + Select one sketch, please. + Молим,изаберите једну cкицу. + + + + CmdSketcherViewSketch + + + Sketcher + Sketcher + + + + View sketch + Погледај скицу + + + + View sketch perpendicular to sketch plane + View sketch perpendicular to sketch plane + + + + Gui::TaskView::TaskSketcherCreateCommands + + + Appearance + Изглед + + + + QObject + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection + Погрешан избор + + + + + Select edge(s) from the sketch. + Изабери ивицу(е) из cкице. + + + + + Select an edge from the sketch. + Изабери ивицу из cкице. + + + + + Double constraint + Дупло ограничење + + + + + The selected edge has already a horizontal constraint! + The selected edge has already a horizontal constraint! + + + + + + + + + + + Impossible constraint + Немогуће ограничење + + + + Cannot add a constraint between two external geometries! + Није могуће додати ограничење између две cпољашње геометрије! + + + + + + Only sketch and its support is allowed to select + Only sketch and its support is allowed to select + + + + One of the selected has to be on the sketch + Једно од одабраног мора бити на cкици + + + + + The selected edge is not a line segment + Одабрани руб није cегмент линије + + + + + The selected edge has already a vertical constraint! + Одабрани руб већ има вертикално ограничење! + + + + The selected item(s) can't accept a horizontal constraint! + Одабране cтавке(а) не могу прихватити хоризонтално ограничење! + + + + The selected item(s) can't accept a vertical constraint! + Одабране cтавке(а) не могу прихватити вертикално ограничење! + + + + Select entities from the sketch. + Одабери ентитете из cкице. + + + + Select exactly one entity from the sketch. + Одабери тачно један ентитет из cкице. + + + + Select one vertex from the sketch. + Select one vertex from the sketch. + + + + + + + + Select vertexes from the sketch. + Select vertexes from the sketch. + + + + Cannot add a fixed x-coordinate constraint on an external geometry! + Cannot add a fixed x-coordinate constraint on an external geometry! + + + + Cannot add a fixed x-coordinate constraint on the root point! + Cannot add a fixed x-coordinate constraint on the root point! + + + + Cannot add a fixed y-coordinate constraint on an external geometry! + Cannot add a fixed y-coordinate constraint on an external geometry! + + + + Cannot add a fixed y-coordinate constraint on the root point! + Cannot add a fixed y-coordinate constraint on the root point! + + + + + + Select one or more arcs or circles from the sketch. + Одабери један, или више лукова,или кругова из cкице. + + + + Constrain equal + Constrain equal + + + + Do you want to share the same radius for all selected elements? + Да ли желите иcти полупречник за cве одабране елементе? + + + + Select only entities from the sketch. + Одабери cамо ентитете из cкице. + + + + + Select one or two lines from the sketch. Or select two edges and a point. + Select one or two lines from the sketch. Or select two edges and a point. + + + + Parallel lines + Паралелне линије + + + + An angle constraint cannot be set for two parallel lines. + An angle constraint cannot be set for two parallel lines. + + + + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. + Constraint_SnellsLaw + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. + + + + Selected objects are not just geometry from one sketch. + Selected objects are not just geometry from one sketch. + + + + Number of selected objects is not 3 (is %1). + Number of selected objects is not 3 (is %1). + + + + Incompatible geometry is selected! + Incompatible geometry is selected! + + + + + Select at least one ellipse and one edge from the sketch. + Select at least one ellipse and one edge from the sketch. + + + + Sketch axes cannot be used in internal alignment constraint + Sketch axes cannot be used in internal alignment constraint + + + + You can not internally constraint an ellipse on other ellipse. Select only one ellipse. + You can not internally constraint an ellipse on other ellipse. Select only one ellipse. + + + + + Maximum 2 points are supported. + Подржане cу макcимално 2 тачке. + + + + + Maximum 2 lines are supported. + Подржане cу макcимално 2 линије. + + + + + Nothing to constraint + Ништа за ограничити + + + + Currently all internal geometry of the ellipse is already exposed. + Currently all internal geometry of the ellipse is already exposed. + + + + + + + Extra elements + Додатни елементи + + + + + + More elements than possible for the given ellipse were provided. These were ignored. + More elements than possible for the given ellipse were provided. These were ignored. + + + + You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. + You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. + + + + You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. + You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. + + + + Currently all internal geometry of the arc of ellipse is already exposed. + Currently all internal geometry of the arc of ellipse is already exposed. + + + + More elements than possible for the given arc of ellipse were provided. These were ignored. + More elements than possible for the given arc of ellipse were provided. These were ignored. + + + + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. + + + Select exactly two vertexes from the sketch. + Select exactly two vertexes from the sketch. + + + + + Select two or more vertexes from the sketch. + Select two or more vertexes from the sketch. + + + + + Select exactly one line or one point and one line or two points from the sketch. + Select exactly one line or one point and one line or two points from the sketch. + + + + Cannot add a length constraint on an external geometry! + Cannot add a length constraint on an external geometry! + + + + Cannot add a length constraint on an axis! + Cannot add a length constraint on an axis! + + + + + Select exactly one point and one object from the sketch. + Select exactly one point and one object from the sketch. + + + + + + + Select exactly one line or up to two points from the sketch. + Select exactly one line or up to two points from the sketch. + + + + Cannot add a horizontal length constraint on an external geometry! + Cannot add a horizontal length constraint on an external geometry! + + + + Cannot add a horizontal length constraint on an axis! + Cannot add a horizontal length constraint on an axis! + + + Cannot add a fixed x-cootdinate constraint on an external geometry! + Cannot add a fixed x-cootdinate constraint on an external geometry! + + + Cannot add a fixed x-cootdinate constraint on the root point! + Cannot add a fixed x-cootdinate constraint on the root point! + + + + Cannot add a vertical length constraint on an external geometry! + Cannot add a vertical length constraint on an external geometry! + + + + Cannot add a vertical length constraint on an axis! + Cannot add a vertical length constraint on an axis! + + + Cannot add a fixed y-cootdinate constraint on an external geometry! + Cannot add a fixed y-cootdinate constraint on an external geometry! + + + Cannot add a fixed y-cootdinate constraint on the root point! + Cannot add a fixed y-cootdinate constraint on the root point! + + + + Select two or more lines from the sketch. + Select two or more lines from the sketch. + + + + + Select at least two lines from the sketch. + Одабери најмање две линије из cкице. + + + + Select a valid line + Select a valid line + + + + The selected edge is not a valid line + The selected edge is not a valid line + + + + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. + perpendicular constraint + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. + + + + Select some geometry from the sketch. + perpendicular constraint + Одабери неку геометрију из cкице. + + + + Wrong number of selected objects! + perpendicular constraint + Погрешан број одабраних објеката! + + + + + + Error + Грешка + + + + + With 3 objects, there must be 2 curves and 1 point. + tangent constraint + Cа 3 објекта,морају поcтојати 2 криве и 1 тачка. + + + + + Cannot add a perpendicularity constraint at an unconnected point! + Cannot add a perpendicularity constraint at an unconnected point! + + + The selected points should be end points of arcs and lines. + The selected points should be end points of arcs and lines. + + + The selected point should be an end point of an arc or line. + The selected point should be an end point of an arc or line. + + + The selected edge should be an arc, line or circle. + The selected edge should be an arc, line or circle. + + + + One of the selected edges should be a line. + One of the selected edges should be a line. + + + + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. + tangent constraint + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. + + + + Select some geometry from the sketch. + tangent constraint + Одабери неку геометрију из cкице. + + + + Wrong number of selected objects! + tangent constraint + Погрешан број одабраних објеката! + + + + + Cannot add a tangency constraint at an unconnected point! + Cannot add a tangency constraint at an unconnected point! + + + Select exactly one arc or circle from the sketch. + Select exactly one arc or circle from the sketch. + + + Select one or two lines from the sketch. + Select one or two lines from the sketch. + + + + Cannot add an angle constraint on an external geometry! + Cannot add an angle constraint on an external geometry! + + + + Cannot add an angle constraint on an axis! + Cannot add an angle constraint on an axis! + + + Select exactly one or two lines from the sketch. + Select exactly one or two lines from the sketch. + + + + Select two edges from the sketch. + Одабери два руба из cкице. + + + Select atleast two lines from the sketch. + Select atleast two lines from the sketch. + + + + + Select two or more compatible edges + Select two or more compatible edges + + + + Sketch axes cannot be used in equality constraints + Sketch axes cannot be used in equality constraints + + + + + Select two or more edges of similar type + Select two or more edges of similar type + + + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. + + + + + Cannot add a constraint between external geometries! + Није могуће додати ограничење између cпољашњих геометрија! + + + + + Cannot add a symmetry constraint between a line and its end points! + Cannot add a symmetry constraint between a line and its end points! + + + Select exactly two same geometries + Select exactly two same geometries + + + Select valid geometries + Select valid geometries + + + Select geometry of similar type + Select geometry of similar type + + + Select two points and one line from the sketch. + Select two points and one line from the sketch. + + + Select exactly one line from the sketch. + Select exactly one line from the sketch. + + + Select two lines from the sketch. + Select two lines from the sketch. + + + Select exactly two lines from the sketch. + Select exactly two lines from the sketch. + + + Select two entities from the sketch. + Select two entities from the sketch. + + + Select exactly two entities from the sketch. + Select exactly two entities from the sketch. + + + + Edit sketch + Измени скицу + + + + A dialog is already open in the task panel + A dialog is already open in the task panel + + + + Do you want to close this dialog? + Do you want to close this dialog? + + + + Several sub-elements selected + Several sub-elements selected + + + + You have to select a single face as support for a sketch! + You have to select a single face as support for a sketch! + + + + No support face selected + Није одабрана површ као оcнова + + + + You have to select a face as support for a sketch! + Морате одабрати површ као оcнову за cкицу! + + + + No planar support + Нема равни као оcнове + + + + You need a planar face as support for a sketch! + Потребна је равна површ као оcнова за cкицу! + + + + Distance constraint + Ограничење раcтојања + + + + Not allowed to edit the datum because the sketch contains conflicting constraints + Not allowed to edit the datum because the sketch contains conflicting constraints + + + + + + Dimensional constraint + Димензионално ограничење + + + + Display + Приказ + + + + + + + Select at least two edges from the sketch. + Select at least two edges from the sketch. + + + + + One selected edge is not connectable + One selected edge is not connectable + + + + Closing a shape formed by exactly two lines makes no sense. + Closing a shape formed by exactly two lines makes no sense. + + + + + Select elements from a single sketch. + Select elements from a single sketch. + + + + No constraint selected + No constraint selected + + + + At least one constraint must be selected + At least one constraint must be selected + + + + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. + + + + SketchOrientationDialog + + Choose orientation + Choose orientation + + + Sketch orientation + Sketch orientation + + + XY-Plane + XY-Plane + + + XZ-Plane + XZ-Plane + + + YZ-Plane + YZ-Plane + + + Reverse direction + Reverse direction + + + Offset: + Offset: + + + + SketcherGui::ConstraintView + + + Change value + Промени вредност + + + + Rename + Преименуј + + + + Delete + Обриши + + + + SketcherGui::EditDatumDialog + + + + Insert angle + Уметни угао + + + + + Angle: + Угао: + + + + + Insert radius + Уметни полупречник + + + + + Refractive index ratio + Constraint_SnellsLaw + Refractive index ratio + + + + + Ratio n2/n1: + Constraint_SnellsLaw + Ratio n2/n1: + + + + Change radius + Промени полупречник + + + + + + Radius: + Полупречник: + + + + Refractive index ratio + Refractive index ratio + + + + Ratio n2/n1: + Ratio n2/n1: + + + + + Insert length + Уметни дужину + + + + + Length: + Дужина: + + + + SketcherGui::ElementView + + + Delete + Обриши + + + + SketcherGui::InsertDatum + + + Insert datum + Уметни Датум + + + + datum: + датум: + + + + SketcherGui::PropertyConstraintListItem + + + Unnamed + Без имена + + + + SketcherGui::SketchOrientationDialog + + + Choose orientation + Choose orientation + + + + Sketch orientation + Sketch orientation + + + + XY-Plane + XY-Plane + + + + XZ-Plane + XZ-Plane + + + + YZ-Plane + YZ-Plane + + + + Reverse direction + Reverse direction + + + + Offset: + Offset: + + + + SketcherGui::SketcherSettings + + + Sketcher + Sketcher + + + + Sketcher colors + Sketcher colors + + + + Default edge color + Подразумевана боја ивице + + + + + The color of edges being edited + The color of edges being edited + + + + Default vertex color + Default vertex color + + + + + The color of vertices being edited + The color of vertices being edited + + + + Edit edge color + Измени боју ивице + + + + Edit vertex color + Edit vertex color + + + + Construction geometry + Construction geometry + + + + The color of construction geometry in edit mode + The color of construction geometry in edit mode + + + + External geometry + Спољна геометрија + + + + The color of external geometry in edit mode + The color of external geometry in edit mode + + + + Fully constrained geometry + Fully constrained geometry + + + + + + The color of fully constrained geometry in edit mode + The color of fully constrained geometry in edit mode + + + + Constraint color + Constraint color + + + + Datum color + Datum color + + + + Datum text size + Datum text size + + + + + + The default line thickness for new shapes + Подразумевана дебљина линија за нове облике + + + + + + + px + px + + + + Default vertex size + Подразумевана величина темена + + + + Default line width + Подразумевана ширина линије + + + + Cursor text color + Cursor text color + + + + Sketch editing + Sketch editing + + + + Font size + Величина фонта + + + + Grid line pattern + Grid line pattern + + + + Ask for value after creating a distance constraint + Ask for value after creating a distance constraint + + + + SketcherGui::SketcherValidation + + + No missing coincidences + No missing coincidences + + + + No missing coincidences found + No missing coincidences found + + + + Missing coincidences + Missing coincidences + + + + %1 missing coincidences found + %1 missing coincidences found + + + + No invalid constraints + No invalid constraints + + + + No invalid constraints found + No invalid constraints found + + + + Invalid constraints + Invalid constraints + + + + Invalid constraints found + Invalid constraints found + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. + + + + + SketcherGui::TaskSketcherConstrains + + + Form + Form + + + + Filter: + Filter: + + + + All + All + + + + Normal + Normal + + + + Datums + Datums + + + + Named + Named + + + + Constraints + Constraints + + + + SketcherGui::TaskSketcherElements + + + Form + Form + + + + Type: + Тип: + + + + Edge + Ивица + + + + Starting Point + Starting Point + + + + End Point + End Point + + + + Center Point + Center Point + + + + Extended Naming + Extended Naming + + + + Auto-switch to Edge + Auto-switch to Edge + + + + <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> + <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> + + + + Elements + Елементи + + + + + + + Point + Тачка + + + + + + + Line + Линија + + + + + + + Arc + Лук + + + + + + + Circle + Круг + + + + + Ellipse + Елипса + + + + + Elliptical Arc + Елиптични Лук + + + + + + + Other + Друго + + + + SketcherGui::TaskSketcherGeneral + + + Form + Form + + + + Show grid + Прикажи решетку + + + + Grid size: + Величина решетке: + + + + Grid snap + Grid snap + + + Unsolved + Unsolved + + + Grid Snap + Grid Snap + + + 0.1 mm + 0.1 mm + + + 0.2 mm + 0.2 mm + + + 0.5 mm + 0.5 mm + + + 1 mm + 1 mm + + + 2 mm + 2 mm + + + 5 mm + 5 mm + + + 10 mm + 10 mm + + + 20 mm + 20 mm + + + 50 mm + 50 mm + + + 100 mm + 100 mm + + + 200 mm + 200 mm + + + 500 mm + 500 mm + + + 1 m + 1 m + + + 2 m + 2 m + + + 5 m + 5 m + + + 10 m + 10 m + + + 20 m + 20 m + + + + Auto constraints + Ауто ограничења + + + auto constraints + auto constraints + + + + Edit controls + Edit controls + + + + SketcherGui::TaskSketcherMessages + + + Solver messages + Solver messages + + + + SketcherGui::TaskSketcherValidation + + + Sketcher validation + Sketcher validation + + + + Delete constraints to external geom. + + + + + Missing coincidences + Missing coincidences + + + + Tolerance: + Tolerance: + + + + Reversed external geometry + + + + + Swap endpoints in constraints + + + + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + + + Find + Пронађи + + + + + Fix + Фиксирај + + + + Invalid constraints + Invalid constraints + + + + SketcherGui::ViewProviderSketch + + + Invalid sketch + Invalid sketch + + + + The sketch is invalid and cannot be edited. +Use the sketch validation tool. + The sketch is invalid and cannot be edited. +Use the sketch validation tool. + + + + Please remove the following constraint: + Please remove the following constraint: + + + + Please remove at least one of the following constraints: + Please remove at least one of the following constraints: + + + + Please remove the following redundant constraint: + Please remove the following redundant constraint: + + + + Please remove the following redundant constraints: + Please remove the following redundant constraints: + + + + Empty sketch + Празна скица + + + + Over-constrained sketch + Over-constrained sketch + + + + + + (click to select) + (кликни да одабереш) + + + + Sketch contains conflicting constraints + Sketch contains conflicting constraints + + + + Sketch contains redundant constraints + Sketch contains redundant constraints + + + Over-constrained sketch + Over-constrained sketch + + + Sketch contains conflicting constraints + Sketch contains conflicting constraints + + + Sketch contains redundant constraints + Sketch contains redundant constraints + + + + Fully constrained sketch + Потпуно ограничена скица + + + + Under-constrained sketch with 1 degree of freedom + Under-constrained sketch with 1 degree of freedom + + + + Under-constrained sketch with %1 degrees of freedom + Under-constrained sketch with %1 degrees of freedom + + + + Solved in %1 sec + Решено за %1 сек + + + + Unsolved (%1 sec) + Unsolved (%1 sec) + + + + Sketcher_Create3PointArc + + + + Create an arc by its end points and a point along the arc + Create an arc by its end points and a point along the arc + + + + Sketcher_Create3PointCircle + + + + Create a circle by 3 rim points + Create a circle by 3 rim points + + + + Sketcher_CreateArc + + + + Create an arc by its center and by its end points + Create an arc by its center and by its end points + + + + Sketcher_CreateArcOfEllipse + + + + Create an arc of ellipse by its center, major radius, endpoints + Create an arc of ellipse by its center, major radius, endpoints + + + + Sketcher_CreateCircle + + + + Create a circle by its center and by a rim point + Create a circle by its center and by a rim point + + + + Sketcher_CreateEllipseBy3Points + + + + Create a ellipse by periapsis, apoapsis, and minor radius + Create a ellipse by periapsis, apoapsis, and minor radius + + + + Sketcher_CreateEllipseByCenter + + + + Create an ellipse by center, major radius and point + Create an ellipse by center, major radius and point + + + + Sketcher_CreateHeptagon + + + + Create a heptagon by its center and by one corner + Create a heptagon by its center and by one corner + + + + Sketcher_CreateHexagon + + + + Create a hexagon by its center and by one corner + Create a hexagon by its center and by one corner + + + + Sketcher_CreateOctagon + + + + Create an octagon by its center and by one corner + Create an octagon by its center and by one corner + + + + Sketcher_CreatePentagon + + + + Create a pentagon by its center and by one corner + Create a pentagon by its center and by one corner + + + + Sketcher_CreateSquare + + + + Create a square by its center and by one corner + Create a square by its center and by one corner + + + + Sketcher_CreateTriangle + + + + Create an equilateral triangle by its center and by one corner + Create an equilateral triangle by its center and by one corner + + + + Sketcher_ReorientSketch + + + Sketch has support + Sketch has support + + + + Sketch with a support face cannot be reoriented. +Do you want to detach it from the support? + Sketch with a support face cannot be reoriented. +Do you want to detach it from the support? + + + + TaskSketcherConstrains + + Constraints + Constraints + + + + TaskSketcherCreateCommands + + Appearance + Изглед + + + + TaskSketcherGeneral + + Edit controls + Edit controls + + + + TaskSketcherMessages + + + Form + Form + + + + Undefined degrees of freedom + Неодрађени степени слободе + + + + Not solved yet + Још није решено + + + + Workbench + + + Sketcher + Sketcher + + + + Sketcher geometries + Sketcher geometries + + + + Sketcher tools + Sketcher tools + + + Sketcher geoms + Sketcher geoms + + + + Sketcher constraints + Sketcher constraints + + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.qm index 23c6b280c3..604c02276c 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts index 9b18898d03..daeb8eb85e 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts @@ -11,12 +11,12 @@ Close Shape - + Close Shape Produce closed shape by Link end point of element with next elements' starting point - + Produce closed shape by Link end point of element with next elements' starting point @@ -85,27 +85,27 @@ Create a conic - + Create a conic Create a conic in the sketch - + Create a conic in the sketch Ellipse by center, major radius, point - + Ellipse by center, major radius, point Ellipse by Periapsis, apoapsis, minor radius - + Ellipse by Periapsis, apoapsis, minor radius Arc of ellipse by center, major radius, endpoints - + Arc of ellipse by center, major radius, endpoints @@ -118,42 +118,42 @@ Create regular polygon - + Create regular polygon Create an regular polygon in the sketcher - + Create an regular polygon in the sketcher Triangle - + Triangle Square - + Square Pentagon - + Pentagon Hexagon - + Hexagon Heptagon - + Heptagon Octagon - + Octagon @@ -166,12 +166,12 @@ Connect Edges - + Connect Edges Link end point of element with next elements' starting point - + Link end point of element with next elements' starting point @@ -318,12 +318,12 @@ Constrain InternalAlignment - + Constrain InternalAlignment Constrains an element to be aligned with the internal geometry of another element - + Constrains an element to be aligned with the internal geometry of another element @@ -430,12 +430,12 @@ Constrain refraction (Snell's law') - + Constrain refraction (Snell's law') Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. @@ -568,12 +568,12 @@ Create an arc of ellipse - + Create an arc of ellipse Create an arc of ellipse in the sketch - + Create an arc of ellipse in the sketch @@ -622,12 +622,12 @@ Create ellipse by 3 points - + Create ellipse by 3 points Create an ellipse by 3 points in the sketch - + Create an ellipse by 3 points in the sketch @@ -640,12 +640,12 @@ Create ellipse by center - + Create ellipse by center Create an ellipse by center in the sketch - + Create an ellipse by center in the sketch @@ -680,12 +680,12 @@ Create heptagon - + Create heptagon Create a heptagon in the sketch - + Create a heptagon in the sketch @@ -698,12 +698,12 @@ Create hexagon - + Create hexagon Create a hexagon in the sketch - + Create a hexagon in the sketch @@ -734,12 +734,12 @@ Create octagon - + Create octagon Create an octagon in the sketch - + Create an octagon in the sketch @@ -752,12 +752,12 @@ Create pentagon - + Create pentagon Create a pentagon in the sketch - + Create a pentagon in the sketch @@ -846,12 +846,12 @@ Create square - + Create square Create a square in the sketch - + Create a square in the sketch @@ -882,12 +882,12 @@ Create equilateral triangle - + Create equilateral triangle Create an equilateral triangle in the sketch - + Create an equilateral triangle in the sketch @@ -905,7 +905,7 @@ Edit the selected sketch - + Edit the selected sketch @@ -973,7 +973,7 @@ Merge sketches - + Merge sketches @@ -983,7 +983,7 @@ Select at least two sketches, please. - + Select at least two sketches, please. @@ -1051,12 +1051,12 @@ Show/hide internal geometry - + Show/hide internal geometry Show all internal geometry / hide unused internal geometry - + Show all internal geometry / hide unused internal geometry @@ -1070,7 +1070,7 @@ Select Conflicting Constraints - + Select Conflicting Constraints @@ -1083,12 +1083,12 @@ Select Constraints - + Select Constraints Select the constraints associated to the selected elements - + Select the constraints associated to the selected elements @@ -1102,7 +1102,7 @@ Select Elements associated with constraints - + Select Elements associated with constraints @@ -1115,12 +1115,12 @@ Select Horizontal Axis - + Select Horizontal Axis Select the horizontal axis - + Select the horizontal axis @@ -1133,12 +1133,12 @@ Select Origin - + Select Origin Select the origin point - + Select the origin point @@ -1152,7 +1152,7 @@ Select Redundant Constraints - + Select Redundant Constraints @@ -1165,12 +1165,12 @@ Select Vertical Axis - + Select Vertical Axis Select the vertical axis - + Select the vertical axis @@ -1352,7 +1352,7 @@ - + Wrong selection Fel val @@ -1387,7 +1387,7 @@ - + Impossible constraint Omöjlig begränsning @@ -1458,29 +1458,29 @@ Cannot add a fixed x-coordinate constraint on an external geometry! - + Cannot add a fixed x-coordinate constraint on an external geometry! Cannot add a fixed x-coordinate constraint on the root point! - + Cannot add a fixed x-coordinate constraint on the root point! Cannot add a fixed y-coordinate constraint on an external geometry! - + Cannot add a fixed y-coordinate constraint on an external geometry! Cannot add a fixed y-coordinate constraint on the root point! - + Cannot add a fixed y-coordinate constraint on the root point! Select one or more arcs or circles from the sketch. - + Select one or more arcs or circles from the sketch. @@ -1490,88 +1490,88 @@ Do you want to share the same radius for all selected elements? - + Do you want to share the same radius for all selected elements? Select only entities from the sketch. - + Select only entities from the sketch. Select one or two lines from the sketch. Or select two edges and a point. - + Select one or two lines from the sketch. Or select two edges and a point. Parallel lines - + Parallel lines An angle constraint cannot be set for two parallel lines. - + An angle constraint cannot be set for two parallel lines. Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Selected objects are not just geometry from one sketch. - + Selected objects are not just geometry from one sketch. Number of selected objects is not 3 (is %1). - + Number of selected objects is not 3 (is %1). Incompatible geometry is selected! - + Incompatible geometry is selected! Select at least one ellipse and one edge from the sketch. - + Select at least one ellipse and one edge from the sketch. Sketch axes cannot be used in internal alignment constraint - + Sketch axes cannot be used in internal alignment constraint You can not internally constraint an ellipse on other ellipse. Select only one ellipse. - + You can not internally constraint an ellipse on other ellipse. Select only one ellipse. Maximum 2 points are supported. - + Maximum 2 points are supported. Maximum 2 lines are supported. - + Maximum 2 lines are supported. Nothing to constraint - + Nothing to constraint Currently all internal geometry of the ellipse is already exposed. - + Currently all internal geometry of the ellipse is already exposed. @@ -1579,39 +1579,39 @@ Extra elements - + Extra elements More elements than possible for the given ellipse were provided. These were ignored. - + More elements than possible for the given ellipse were provided. These were ignored. You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. - + You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Currently all internal geometry of the arc of ellipse is already exposed. - + Currently all internal geometry of the arc of ellipse is already exposed. More elements than possible for the given arc of ellipse were provided. These were ignored. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Select exactly two vertexes from the sketch. @@ -1716,33 +1716,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. perpendicular constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. perpendicular constraint - + Select some geometry from the sketch. Wrong number of selected objects! perpendicular constraint - + Wrong number of selected objects! Error - + Fel With 3 objects, there must be 2 curves and 1 point. tangent constraint - + With 3 objects, there must be 2 curves and 1 point. @@ -1773,19 +1775,21 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. tangent constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. tangent constraint - + Select some geometry from the sketch. Wrong number of selected objects! tangent constraint - + Wrong number of selected objects! @@ -1898,7 +1902,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Välj exakt två föremål från skissen. - + Edit sketch Redigera skiss @@ -1970,39 +1974,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select at least two edges from the sketch. - + Select at least two edges from the sketch. One selected edge is not connectable - + One selected edge is not connectable Closing a shape formed by exactly two lines makes no sense. - + Closing a shape formed by exactly two lines makes no sense. Select elements from a single sketch. - + Select elements from a single sketch. No constraint selected - + No constraint selected At least one constraint must be selected - + At least one constraint must be selected - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. @@ -2079,19 +2083,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio Constraint_SnellsLaw - + Refractive index ratio Ratio n2/n1: Constraint_SnellsLaw - + Ratio n2/n1: Change radius - + Change radius @@ -2103,12 +2107,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio - + Refractive index ratio Ratio n2/n1: - + Ratio n2/n1: @@ -2149,7 +2153,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unnamed - + Namnlös @@ -2269,11 +2273,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Constraint color - - - - Constrain color - Constrain color + Constraint color @@ -2308,7 +2308,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Default line width - Default line width + Standardlinjebredd @@ -2339,7 +2339,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::SketcherValidation - + No missing coincidences No missing coincidences @@ -2361,21 +2361,87 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c No invalid constraints - + No invalid constraints No invalid constraints found - + No invalid constraints found Invalid constraints - + Invalid constraints Invalid constraints found + Invalid constraints found + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. @@ -2427,47 +2493,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Type: - + Typ: Edge - + Kant Starting Point - + Starting Point End Point - + End Point Center Point - + Center Point Extended Naming - + Extended Naming Auto-switch to Edge - + Auto-switch to Edge <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> - + <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> Elements - + Elements @@ -2475,7 +2541,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Point - + Punkt @@ -2483,7 +2549,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - + Linje @@ -2491,7 +2557,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc - + Cirkelbåge @@ -2499,19 +2565,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Circle - + Cirkel Ellipse - + Ellips Elliptical Arc - + Elliptical Arc @@ -2519,7 +2585,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Other - + Other @@ -2539,10 +2605,6 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Grid size: Storlek på rutnät: - - mm - mm - Grid snap @@ -2655,31 +2717,62 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher validation - + + Delete constraints to external geom. + + + + Missing coincidences Missing coincidences Tolerance: - Tolerance: + Tolerans: + + + + Reversed external geometry + + + + + Swap endpoints in constraints + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + Find Find - - + + Fix Fix - + Invalid constraints - + Invalid constraints @@ -2687,13 +2780,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid sketch - + Invalid sketch The sketch is invalid and cannot be edited. Use the sketch validation tool. - + The sketch is invalid and cannot be edited. +Use the sketch validation tool. @@ -2723,24 +2817,24 @@ Use the sketch validation tool. Over-constrained sketch - + Over-constrained sketch (click to select) - + (click to select) Sketch contains conflicting constraints - + Sketch contains conflicting constraints Sketch contains redundant constraints - + Sketch contains redundant constraints Over-constrained sketch @@ -2813,7 +2907,7 @@ Use the sketch validation tool. Create an arc of ellipse by its center, major radius, endpoints - + Create an arc of ellipse by its center, major radius, endpoints @@ -2831,7 +2925,7 @@ Use the sketch validation tool. Create a ellipse by periapsis, apoapsis, and minor radius - + Create a ellipse by periapsis, apoapsis, and minor radius @@ -2840,7 +2934,7 @@ Use the sketch validation tool. Create an ellipse by center, major radius and point - + Create an ellipse by center, major radius and point @@ -2849,7 +2943,7 @@ Use the sketch validation tool. Create a heptagon by its center and by one corner - + Create a heptagon by its center and by one corner @@ -2858,7 +2952,7 @@ Use the sketch validation tool. Create a hexagon by its center and by one corner - + Create a hexagon by its center and by one corner @@ -2867,7 +2961,7 @@ Use the sketch validation tool. Create an octagon by its center and by one corner - + Create an octagon by its center and by one corner @@ -2876,7 +2970,7 @@ Use the sketch validation tool. Create a pentagon by its center and by one corner - + Create a pentagon by its center and by one corner @@ -2885,7 +2979,7 @@ Use the sketch validation tool. Create a square by its center and by one corner - + Create a square by its center and by one corner @@ -2894,7 +2988,7 @@ Use the sketch validation tool. Create an equilateral triangle by its center and by one corner - + Create an equilateral triangle by its center and by one corner @@ -2966,7 +3060,7 @@ Do you want to detach it from the support? Sketcher tools - + Sketcher tools Sketcher geoms diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts index 933441881e..006609b467 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts @@ -1352,7 +1352,7 @@ - + Wrong selection Yanlış seçim @@ -1387,7 +1387,7 @@ - + Impossible constraint Impossible constraint @@ -1898,7 +1898,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select exactly two entities from the sketch. - + Edit sketch Taslağı düzenle @@ -2000,7 +2000,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. @@ -2339,7 +2339,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::SketcherValidation - + No missing coincidences No missing coincidences @@ -2378,6 +2378,72 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid constraints found + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. + + SketcherGui::TaskSketcherConstrains @@ -2655,7 +2721,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher validation - + + Delete constraints to external geom. + + + + Missing coincidences Missing coincidences @@ -2664,20 +2735,46 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Tolerance: Tolerance: + + + Reversed external geometry + + + + + Swap endpoints in constraints + + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + Find Find - - + + Fix Fix - + Invalid constraints diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.qm index ccd225af51..e41fe8747e 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts index ad2ecebf4f..3b49bbd889 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts @@ -11,12 +11,12 @@ Close Shape - + Close Shape Produce closed shape by Link end point of element with next elements' starting point - + Produce closed shape by Link end point of element with next elements' starting point @@ -39,12 +39,12 @@ Center and end points - Center and end points + Центральні та кінцеві точки End points and rim point - End points and rim point + За кінцевими та дотичною точками @@ -72,7 +72,7 @@ 3 rim points - 3 rim points + 3 дотичних точки @@ -85,27 +85,27 @@ Create a conic - + Create a conic Create a conic in the sketch - + Create a conic in the sketch Ellipse by center, major radius, point - + Ellipse by center, major radius, point Ellipse by Periapsis, apoapsis, minor radius - + Ellipse by Periapsis, apoapsis, minor radius Arc of ellipse by center, major radius, endpoints - + Arc of ellipse by center, major radius, endpoints @@ -118,42 +118,42 @@ Create regular polygon - + Create regular polygon Create an regular polygon in the sketcher - + Create an regular polygon in the sketcher Triangle - + Triangle Square - + Square Pentagon - + Pentagon Hexagon - + Hexagon Heptagon - + Heptagon Octagon - + Octagon @@ -166,12 +166,12 @@ Connect Edges - + Connect Edges Link end point of element with next elements' starting point - + Link end point of element with next elements' starting point @@ -269,7 +269,7 @@ Fix the vertical distance between two points or line ends - Fix the vertical distance between two points or line ends + Виправити вертикальну відстань між двома точками або кінцями ліній @@ -318,12 +318,12 @@ Constrain InternalAlignment - + Constrain InternalAlignment Constrains an element to be aligned with the internal geometry of another element - + Constrains an element to be aligned with the internal geometry of another element @@ -430,12 +430,12 @@ Constrain refraction (Snell's law') - + Constrain refraction (Snell's law') Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. @@ -506,7 +506,7 @@ Create arc by three points - Create arc by three points + Створити дугу за трьома точками @@ -524,12 +524,12 @@ Create circle by three points - Create circle by three points + Створити коло за трьома точками Create a circle by 3 perimeter points - Create a circle by 3 perimeter points + Створити коло за трьома точками периметра @@ -542,7 +542,7 @@ Create arc by center - Create arc by center + Створити дугу по центру @@ -568,12 +568,12 @@ Create an arc of ellipse - + Create an arc of ellipse Create an arc of ellipse in the sketch - + Create an arc of ellipse in the sketch @@ -622,12 +622,12 @@ Create ellipse by 3 points - + Create ellipse by 3 points Create an ellipse by 3 points in the sketch - + Create an ellipse by 3 points in the sketch @@ -640,12 +640,12 @@ Create ellipse by center - + Create ellipse by center Create an ellipse by center in the sketch - + Create an ellipse by center in the sketch @@ -658,7 +658,7 @@ Create fillet - Create fillet + Створити скруглення Create a fillet between two lines or at a coincidental point @@ -680,12 +680,12 @@ Create heptagon - + Create heptagon Create a heptagon in the sketch - + Create a heptagon in the sketch @@ -698,12 +698,12 @@ Create hexagon - + Create hexagon Create a hexagon in the sketch - + Create a hexagon in the sketch @@ -734,12 +734,12 @@ Create octagon - + Create octagon Create an octagon in the sketch - + Create an octagon in the sketch @@ -752,12 +752,12 @@ Create pentagon - + Create pentagon Create a pentagon in the sketch - + Create a pentagon in the sketch @@ -828,12 +828,12 @@ Create slot - Create slot + Створити паз Create a slot in the sketch - Create a slot in the sketch + Створити паз в ескізі @@ -846,12 +846,12 @@ Create square - + Create square Create a square in the sketch - + Create a square in the sketch @@ -882,12 +882,12 @@ Create equilateral triangle - + Create equilateral triangle Create an equilateral triangle in the sketch - + Create an equilateral triangle in the sketch @@ -905,7 +905,7 @@ Edit the selected sketch - + Edit the selected sketch @@ -918,12 +918,12 @@ External geometry - External geometry + Зовнішня геометрія Create an edge linked to an external geometry - Create an edge linked to an external geometry + Створити ребро, яке прив’язане на зовнішню геометрію @@ -954,12 +954,12 @@ Map sketch to face... - Map sketch to face... + Відобразити ескіз на поверхню... Map a sketch to a face - Map a sketch to a face + Відобразити ескіз на поверхню @@ -973,7 +973,7 @@ Merge sketches - + Merge sketches @@ -983,7 +983,7 @@ Select at least two sketches, please. - + Select at least two sketches, please. @@ -1033,12 +1033,12 @@ Reorient sketch... - Reorient sketch... + Переорієнтувати ескіз... Reorient the selected sketch - Reorient the selected sketch + Переорієнтувати обраний ескіз @@ -1051,12 +1051,12 @@ Show/hide internal geometry - + Show/hide internal geometry Show all internal geometry / hide unused internal geometry - + Show all internal geometry / hide unused internal geometry @@ -1070,7 +1070,7 @@ Select Conflicting Constraints - + Select Conflicting Constraints @@ -1083,12 +1083,12 @@ Select Constraints - + Select Constraints Select the constraints associated to the selected elements - + Select the constraints associated to the selected elements @@ -1102,7 +1102,7 @@ Select Elements associated with constraints - + Select Elements associated with constraints @@ -1115,12 +1115,12 @@ Select Horizontal Axis - + Select Horizontal Axis Select the horizontal axis - + Select the horizontal axis @@ -1133,12 +1133,12 @@ Select Origin - + Select Origin Select the origin point - + Select the origin point @@ -1152,7 +1152,7 @@ Select Redundant Constraints - + Select Redundant Constraints @@ -1165,12 +1165,12 @@ Select Vertical Axis - + Select Vertical Axis Select the vertical axis - + Select the vertical axis @@ -1201,12 +1201,12 @@ Trim edge - Обрізати грань + Обрізати ребро Trim an edge with respect to the picked position - Trim an edge with respect to the picked position + Обрізати ребро відповідно до обраної позиції Trims an edge with respect to the picked position @@ -1223,12 +1223,12 @@ Validate sketch... - Validate sketch... + Перевірити ескіз... Validate sketch - Validate sketch + Перевірити ескіз @@ -1238,7 +1238,7 @@ Select one sketch, please. - Select one sketch, please. + Оберіть один ескіз, будь ласка. @@ -1251,7 +1251,7 @@ View sketch - View sketch + Переглянути ескіз @@ -1352,7 +1352,7 @@ - + Wrong selection Невірний вибір @@ -1360,7 +1360,7 @@ Select edge(s) from the sketch. - Select edge(s) from the sketch. + Обрати ребро(-а) з ескізу. @@ -1378,7 +1378,7 @@ The selected edge has already a horizontal constraint! - Обраний край вже обмежено по горизонталі! + Обране ребро вже обмежено по горизонталі! @@ -1387,7 +1387,7 @@ - + Impossible constraint Обмеження неможливе @@ -1413,13 +1413,13 @@ The selected edge is not a line segment - The selected edge is not a line segment + Обране ребро не є відрізком лінії The selected edge has already a vertical constraint! - Вибраний край вже обмежено по вертикалі! + Обране ребро вже обмежено по вертикалі! @@ -1434,7 +1434,7 @@ Select entities from the sketch. - Select entities from the sketch. + Оберіть елементи ескізу. @@ -1458,29 +1458,29 @@ Cannot add a fixed x-coordinate constraint on an external geometry! - + Cannot add a fixed x-coordinate constraint on an external geometry! Cannot add a fixed x-coordinate constraint on the root point! - + Cannot add a fixed x-coordinate constraint on the root point! Cannot add a fixed y-coordinate constraint on an external geometry! - + Cannot add a fixed y-coordinate constraint on an external geometry! Cannot add a fixed y-coordinate constraint on the root point! - + Cannot add a fixed y-coordinate constraint on the root point! Select one or more arcs or circles from the sketch. - + Select one or more arcs or circles from the sketch. @@ -1490,88 +1490,88 @@ Do you want to share the same radius for all selected elements? - + Do you want to share the same radius for all selected elements? Select only entities from the sketch. - + Select only entities from the sketch. Select one or two lines from the sketch. Or select two edges and a point. - + Select one or two lines from the sketch. Or select two edges and a point. Parallel lines - + Parallel lines An angle constraint cannot be set for two parallel lines. - + An angle constraint cannot be set for two parallel lines. Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Selected objects are not just geometry from one sketch. - + Selected objects are not just geometry from one sketch. Number of selected objects is not 3 (is %1). - + Number of selected objects is not 3 (is %1). Incompatible geometry is selected! - + Incompatible geometry is selected! Select at least one ellipse and one edge from the sketch. - + Select at least one ellipse and one edge from the sketch. Sketch axes cannot be used in internal alignment constraint - + Sketch axes cannot be used in internal alignment constraint You can not internally constraint an ellipse on other ellipse. Select only one ellipse. - + You can not internally constraint an ellipse on other ellipse. Select only one ellipse. Maximum 2 points are supported. - + Maximum 2 points are supported. Maximum 2 lines are supported. - + Maximum 2 lines are supported. Nothing to constraint - + Nothing to constraint Currently all internal geometry of the ellipse is already exposed. - + Currently all internal geometry of the ellipse is already exposed. @@ -1579,39 +1579,39 @@ Extra elements - + Extra elements More elements than possible for the given ellipse were provided. These were ignored. - + More elements than possible for the given ellipse were provided. These were ignored. You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. - + You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Currently all internal geometry of the arc of ellipse is already exposed. - + Currently all internal geometry of the arc of ellipse is already exposed. More elements than possible for the given arc of ellipse were provided. These were ignored. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Select exactly two vertexes from the sketch. @@ -1708,7 +1708,7 @@ The selected edge is not a valid line - The selected edge is not a valid line + Обране ребро не є припустимою лінією @@ -1716,33 +1716,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. perpendicular constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. perpendicular constraint - + Select some geometry from the sketch. Wrong number of selected objects! perpendicular constraint - + Wrong number of selected objects! Error - + Помилка With 3 objects, there must be 2 curves and 1 point. tangent constraint - + With 3 objects, there must be 2 curves and 1 point. @@ -1773,19 +1775,21 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. tangent constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. tangent constraint - + Select some geometry from the sketch. Wrong number of selected objects! tangent constraint - + Wrong number of selected objects! @@ -1818,11 +1822,11 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select two edges from the sketch. - Select two edges from the sketch. + Виберіть два ребра з ескізу. Select atleast two lines from the sketch. - Select atleast two lines from the sketch. + Виберіть щонайменше дві лінії з ескізу. @@ -1853,7 +1857,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Cannot add a constraint between external geometries! - Cannot add a constraint between external geometries! + Не вдалося додати обмеження між зовнішніми фігурами! @@ -1898,7 +1902,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Оберіть на ескізі лише два об'єкти. - + Edit sketch Редагувати ескіз @@ -1970,39 +1974,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select at least two edges from the sketch. - + Select at least two edges from the sketch. One selected edge is not connectable - + One selected edge is not connectable Closing a shape formed by exactly two lines makes no sense. - + Closing a shape formed by exactly two lines makes no sense. Select elements from a single sketch. - + Select elements from a single sketch. No constraint selected - + No constraint selected At least one constraint must be selected - + At least one constraint must be selected - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. @@ -2060,7 +2064,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert angle - Insert angle + Вставити кут @@ -2072,26 +2076,26 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Insert radius - Insert radius + Вставити радіус Refractive index ratio Constraint_SnellsLaw - + Refractive index ratio Ratio n2/n1: Constraint_SnellsLaw - + Ratio n2/n1: Change radius - + Change radius @@ -2103,18 +2107,18 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio - + Refractive index ratio Ratio n2/n1: - + Ratio n2/n1: Insert length - Insert length + Вставити довжину @@ -2149,7 +2153,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unnamed - + Без назви @@ -2216,7 +2220,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Default vertex color - Default vertex color + Колір за замовчанням для вершин @@ -2227,12 +2231,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Edit edge color - Edit edge color + Змінити колір ребра Edit vertex color - Edit vertex color + Змінити колір вершини @@ -2242,17 +2246,17 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c The color of construction geometry in edit mode - The color of construction geometry in edit mode + Колір допоміжної геометрії у режимі редагування External geometry - External geometry + Зовнішня геометрія The color of external geometry in edit mode - The color of external geometry in edit mode + Колір зовнішньої геометрії в режим редагування @@ -2269,28 +2273,24 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Constraint color - - - - Constrain color - Constrain color + Constraint color Datum color - Datum color + Колір переліку розмірів Datum text size - Datum text size + Розмір тексту переліку розмірів The default line thickness for new shapes - The default line thickness for new shapes + Товщина лінії за замовчанням для нових фігур @@ -2303,27 +2303,27 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Default vertex size - Default vertex size + Стандартний розмір вершини Default line width - Default line width + Товщина лінії за замовчанням Cursor text color - Cursor text color + Колір тексту курсора Sketch editing - Sketch editing + Редагування ескізу Font size - Font size + Розмір шрифту @@ -2339,7 +2339,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::SketcherValidation - + No missing coincidences No missing coincidences @@ -2361,21 +2361,87 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c No invalid constraints - + No invalid constraints No invalid constraints found - + No invalid constraints found Invalid constraints - + Invalid constraints Invalid constraints found + Invalid constraints found + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. @@ -2427,47 +2493,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Type: - + Тип: Edge - + Ребро Starting Point - + Starting Point End Point - + End Point Center Point - + Center Point Extended Naming - + Extended Naming Auto-switch to Edge - + Auto-switch to Edge <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> - + <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> Elements - + Elements @@ -2475,7 +2541,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Point - + Точка @@ -2483,7 +2549,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - + Лінія @@ -2491,7 +2557,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc - + Дуга @@ -2499,19 +2565,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Circle - + Коло Ellipse - + Еліпс Elliptical Arc - + Elliptical Arc @@ -2519,7 +2585,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Other - + Other @@ -2532,17 +2598,13 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Show grid - Show grid + Показати сітку Grid size: Розмір сітки: - - mm - мм - Grid snap @@ -2655,7 +2717,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher validation - + + Delete constraints to external geom. + + + + Missing coincidences Missing coincidences @@ -2664,22 +2731,48 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Tolerance: Tolerance: + + + Reversed external geometry + + + + + Swap endpoints in constraints + + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + Find - Find + Знайти - - + + Fix - Fix + Виправити - + Invalid constraints - + Invalid constraints @@ -2687,28 +2780,29 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid sketch - + Invalid sketch The sketch is invalid and cannot be edited. Use the sketch validation tool. - + The sketch is invalid and cannot be edited. +Use the sketch validation tool. Please remove the following constraint: - Please remove the following constraint: + Будь ласка, видаліть наступне обмеження: Please remove at least one of the following constraints: - Please remove at least one of the following constraints: + Будь ласка, видаліть принаймні одне з таких обмежень: Please remove the following redundant constraint: - Please remove the following redundant constraint: + Будь ласка, видаліть наступне надлишкове обмеження: @@ -2718,29 +2812,29 @@ Use the sketch validation tool. Empty sketch - Empty sketch + Порожній ескіз Over-constrained sketch - + Over-constrained sketch (click to select) - + (click to select) Sketch contains conflicting constraints - + Sketch contains conflicting constraints Sketch contains redundant constraints - + Sketch contains redundant constraints Over-constrained sketch @@ -2813,7 +2907,7 @@ Use the sketch validation tool. Create an arc of ellipse by its center, major radius, endpoints - + Create an arc of ellipse by its center, major radius, endpoints @@ -2831,7 +2925,7 @@ Use the sketch validation tool. Create a ellipse by periapsis, apoapsis, and minor radius - + Create a ellipse by periapsis, apoapsis, and minor radius @@ -2840,7 +2934,7 @@ Use the sketch validation tool. Create an ellipse by center, major radius and point - + Create an ellipse by center, major radius and point @@ -2849,7 +2943,7 @@ Use the sketch validation tool. Create a heptagon by its center and by one corner - + Create a heptagon by its center and by one corner @@ -2858,7 +2952,7 @@ Use the sketch validation tool. Create a hexagon by its center and by one corner - + Create a hexagon by its center and by one corner @@ -2867,7 +2961,7 @@ Use the sketch validation tool. Create an octagon by its center and by one corner - + Create an octagon by its center and by one corner @@ -2876,7 +2970,7 @@ Use the sketch validation tool. Create a pentagon by its center and by one corner - + Create a pentagon by its center and by one corner @@ -2885,7 +2979,7 @@ Use the sketch validation tool. Create a square by its center and by one corner - + Create a square by its center and by one corner @@ -2894,7 +2988,7 @@ Use the sketch validation tool. Create an equilateral triangle by its center and by one corner - + Create an equilateral triangle by its center and by one corner @@ -2966,7 +3060,7 @@ Do you want to detach it from the support? Sketcher tools - + Sketcher tools Sketcher geoms diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.qm index 7bb1f11c5b..a2acb01db6 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts index 44d37d9a5c..3f27326f71 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts @@ -11,12 +11,12 @@ Close Shape - + 封闭形状 Produce closed shape by Link end point of element with next elements' starting point - + 通过连接两元素的首末点产生闭合形状 @@ -34,17 +34,17 @@ Create an arc in the sketcher - Create an arc in the sketcher + 在草绘中添加圆弧 Center and end points - Center and end points + 中心点和端点 End points and rim point - End points and rim point + 端点和边缘点 @@ -62,17 +62,17 @@ Create a circle in the sketcher - Create a circle in the sketcher + 草绘中添加圆 Center and rim point - Center and rim point + 圆心和边缘点 3 rim points - 3 rim points + 3个边缘点 @@ -85,27 +85,27 @@ Create a conic - + 创建圆锥形 Create a conic in the sketch - + 在草绘中创建圆锥形 Ellipse by center, major radius, point - + 通过中心，主要半径，点确定椭圆形状 Ellipse by Periapsis, apoapsis, minor radius - + Ellipse by Periapsis, apoapsis, minor radius Arc of ellipse by center, major radius, endpoints - + Arc of ellipse by center, major radius, endpoints @@ -118,42 +118,42 @@ Create regular polygon - + 创建正多边形 Create an regular polygon in the sketcher - + 在草绘中创建正多边形 Triangle - + 三角形 Square - + 正方型 Pentagon - + 五边形 Hexagon - + 六边形 Heptagon - + 七边形 Octagon - + 八边型 @@ -166,12 +166,12 @@ Connect Edges - + 连接边 Link end point of element with next elements' starting point - + 链接某元素的终点与下一个元素的起点 @@ -318,12 +318,12 @@ Constrain InternalAlignment - + 内部对齐约束 Constrains an element to be aligned with the internal geometry of another element - + Constrains an element to be aligned with the internal geometry of another element @@ -377,7 +377,7 @@ Create a perpendicular constraint between two lines - Create a perpendicular constraint between two lines + 为两条直线创建垂直约束 Create a Perpendicular constraint between two lines @@ -430,12 +430,12 @@ Constrain refraction (Snell's law') - + 折射约束（按snell折射定律） Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - + 通过指定两光线端点和一条边作为折射界面创建折射约束 @@ -453,7 +453,7 @@ Create a symmetry constraint between two points with respect to a line or a third point - Create a symmetry constraint between two points with respect to a line or a third point + 为两点相对与一条直线或第三点创建对称约束 Create an symmetry constraint between two points with respect to a line @@ -506,7 +506,7 @@ Create arc by three points - Create arc by three points + 通过三点创建圆弧 @@ -524,7 +524,7 @@ Create circle by three points - Create circle by three points + 通过三点创建圆 @@ -542,7 +542,7 @@ Create arc by center - Create arc by center + 通过圆心创建圆弧 @@ -568,12 +568,12 @@ Create an arc of ellipse - + 创建椭圆弧 Create an arc of ellipse in the sketch - + 在草绘中创建椭圆弧 @@ -622,12 +622,12 @@ Create ellipse by 3 points - + 通过三点创建椭圆 Create an ellipse by 3 points in the sketch - + 通过三点在草绘中创建椭圆 @@ -640,12 +640,12 @@ Create ellipse by center - + 通过中心创建椭圆 Create an ellipse by center in the sketch - + 通过中心在草绘中创建椭圆 @@ -680,12 +680,12 @@ Create heptagon - + 创建正七边型 Create a heptagon in the sketch - + 在草绘中创建正七边型 @@ -698,12 +698,12 @@ Create hexagon - + 创建正六边型 Create a hexagon in the sketch - + 在草绘中创建正六边型 @@ -734,12 +734,12 @@ Create octagon - + 创建正八边型 Create an octagon in the sketch - + 在草绘中创建正八边型 @@ -752,12 +752,12 @@ Create pentagon - + 创建正五边型 Create a pentagon in the sketch - + 在草绘中创建正五边型 @@ -793,7 +793,7 @@ Create a polyline in the sketch. 'M' Key cycles behaviour - Create a polyline in the sketch. 'M' Key cycles behaviour + 在草绘中创建一条折线。“M”键循环切换行为 Create a polyline in the sketch @@ -828,12 +828,12 @@ Create slot - Create slot + 创建圆槽 Create a slot in the sketch - Create a slot in the sketch + 在草图中创建圆槽 @@ -846,12 +846,12 @@ Create square - + Create square Create a square in the sketch - + Create a square in the sketch @@ -882,12 +882,12 @@ Create equilateral triangle - + Create equilateral triangle Create an equilateral triangle in the sketch - + Create an equilateral triangle in the sketch @@ -905,7 +905,7 @@ Edit the selected sketch - + Edit the selected sketch @@ -973,7 +973,7 @@ Merge sketches - + Merge sketches @@ -983,7 +983,7 @@ Select at least two sketches, please. - + Select at least two sketches, please. @@ -1051,12 +1051,12 @@ Show/hide internal geometry - + Show/hide internal geometry Show all internal geometry / hide unused internal geometry - + Show all internal geometry / hide unused internal geometry @@ -1070,7 +1070,7 @@ Select Conflicting Constraints - + Select Conflicting Constraints @@ -1083,12 +1083,12 @@ Select Constraints - + Select Constraints Select the constraints associated to the selected elements - + Select the constraints associated to the selected elements @@ -1102,7 +1102,7 @@ Select Elements associated with constraints - + Select Elements associated with constraints @@ -1115,12 +1115,12 @@ Select Horizontal Axis - + Select Horizontal Axis Select the horizontal axis - + Select the horizontal axis @@ -1133,12 +1133,12 @@ Select Origin - + Select Origin Select the origin point - + Select the origin point @@ -1152,7 +1152,7 @@ Select Redundant Constraints - + Select Redundant Constraints @@ -1165,12 +1165,12 @@ Select Vertical Axis - + Select Vertical Axis Select the vertical axis - + Select the vertical axis @@ -1352,7 +1352,7 @@ - + Wrong selection 选择错误 @@ -1387,7 +1387,7 @@ - + Impossible constraint 不可约束 @@ -1458,29 +1458,29 @@ Cannot add a fixed x-coordinate constraint on an external geometry! - + Cannot add a fixed x-coordinate constraint on an external geometry! Cannot add a fixed x-coordinate constraint on the root point! - + Cannot add a fixed x-coordinate constraint on the root point! Cannot add a fixed y-coordinate constraint on an external geometry! - + Cannot add a fixed y-coordinate constraint on an external geometry! Cannot add a fixed y-coordinate constraint on the root point! - + Cannot add a fixed y-coordinate constraint on the root point! Select one or more arcs or circles from the sketch. - + Select one or more arcs or circles from the sketch. @@ -1490,88 +1490,88 @@ Do you want to share the same radius for all selected elements? - + Do you want to share the same radius for all selected elements? Select only entities from the sketch. - + Select only entities from the sketch. Select one or two lines from the sketch. Or select two edges and a point. - + Select one or two lines from the sketch. Or select two edges and a point. Parallel lines - + Parallel lines An angle constraint cannot be set for two parallel lines. - + An angle constraint cannot be set for two parallel lines. Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Selected objects are not just geometry from one sketch. - + Selected objects are not just geometry from one sketch. Number of selected objects is not 3 (is %1). - + Number of selected objects is not 3 (is %1). Incompatible geometry is selected! - + Incompatible geometry is selected! Select at least one ellipse and one edge from the sketch. - + Select at least one ellipse and one edge from the sketch. Sketch axes cannot be used in internal alignment constraint - + Sketch axes cannot be used in internal alignment constraint You can not internally constraint an ellipse on other ellipse. Select only one ellipse. - + You can not internally constraint an ellipse on other ellipse. Select only one ellipse. Maximum 2 points are supported. - + Maximum 2 points are supported. Maximum 2 lines are supported. - + Maximum 2 lines are supported. Nothing to constraint - + Nothing to constraint Currently all internal geometry of the ellipse is already exposed. - + Currently all internal geometry of the ellipse is already exposed. @@ -1579,39 +1579,39 @@ Extra elements - + Extra elements More elements than possible for the given ellipse were provided. These were ignored. - + More elements than possible for the given ellipse were provided. These were ignored. You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. - + You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Currently all internal geometry of the arc of ellipse is already exposed. - + Currently all internal geometry of the arc of ellipse is already exposed. More elements than possible for the given arc of ellipse were provided. These were ignored. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Select exactly two vertexes from the sketch. @@ -1716,33 +1716,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. perpendicular constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. perpendicular constraint - + Select some geometry from the sketch. Wrong number of selected objects! perpendicular constraint - + Wrong number of selected objects! Error - + 错误 With 3 objects, there must be 2 curves and 1 point. tangent constraint - + With 3 objects, there must be 2 curves and 1 point. @@ -1773,19 +1775,21 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. tangent constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. tangent constraint - + Select some geometry from the sketch. Wrong number of selected objects! tangent constraint - + Wrong number of selected objects! @@ -1898,7 +1902,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 仅从草绘选择两实体. - + Edit sketch 编辑草绘 @@ -1970,39 +1974,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select at least two edges from the sketch. - + Select at least two edges from the sketch. One selected edge is not connectable - + One selected edge is not connectable Closing a shape formed by exactly two lines makes no sense. - + Closing a shape formed by exactly two lines makes no sense. Select elements from a single sketch. - + Select elements from a single sketch. No constraint selected - + No constraint selected At least one constraint must be selected - + At least one constraint must be selected - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. @@ -2079,19 +2083,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio Constraint_SnellsLaw - + Refractive index ratio Ratio n2/n1: Constraint_SnellsLaw - + Ratio n2/n1: Change radius - + Change radius @@ -2103,12 +2107,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio - + Refractive index ratio Ratio n2/n1: - + Ratio n2/n1: @@ -2149,7 +2153,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unnamed - + Unnamed @@ -2269,11 +2273,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Constraint color - - - - Constrain color - Constrain color + Constraint color @@ -2339,7 +2339,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::SketcherValidation - + No missing coincidences No missing coincidences @@ -2361,21 +2361,87 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c No invalid constraints - + No invalid constraints No invalid constraints found - + No invalid constraints found Invalid constraints - + Invalid constraints Invalid constraints found + Invalid constraints found + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. @@ -2427,47 +2493,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Type: - + 类型: Edge - + 边 Starting Point - + Starting Point End Point - + End Point Center Point - + Center Point Extended Naming - + Extended Naming Auto-switch to Edge - + Auto-switch to Edge <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> - + <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> Elements - + Elements @@ -2475,7 +2541,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Point - + 点 @@ -2483,7 +2549,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - + 线 @@ -2491,7 +2557,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc - + 圆弧 @@ -2499,19 +2565,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Circle - + 圆 Ellipse - + 椭圆 Elliptical Arc - + Elliptical Arc @@ -2519,7 +2585,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Other - + Other @@ -2539,10 +2605,6 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Grid size: 网格尺寸: - - mm - mm - Grid snap @@ -2655,7 +2717,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sketcher validation - + + Delete constraints to external geom. + + + + Missing coincidences Missing coincidences @@ -2664,22 +2731,48 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Tolerance: Tolerance: + + + Reversed external geometry + + + + + Swap endpoints in constraints + + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + Find Find - - + + Fix Fix - + Invalid constraints - + Invalid constraints @@ -2687,13 +2780,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid sketch - + Invalid sketch The sketch is invalid and cannot be edited. Use the sketch validation tool. - + The sketch is invalid and cannot be edited. +Use the sketch validation tool. @@ -2723,24 +2817,24 @@ Use the sketch validation tool. Over-constrained sketch - + Over-constrained sketch (click to select) - + (click to select) Sketch contains conflicting constraints - + Sketch contains conflicting constraints Sketch contains redundant constraints - + Sketch contains redundant constraints Over-constrained sketch @@ -2813,7 +2907,7 @@ Use the sketch validation tool. Create an arc of ellipse by its center, major radius, endpoints - + Create an arc of ellipse by its center, major radius, endpoints @@ -2831,7 +2925,7 @@ Use the sketch validation tool. Create a ellipse by periapsis, apoapsis, and minor radius - + Create a ellipse by periapsis, apoapsis, and minor radius @@ -2840,7 +2934,7 @@ Use the sketch validation tool. Create an ellipse by center, major radius and point - + Create an ellipse by center, major radius and point @@ -2849,7 +2943,7 @@ Use the sketch validation tool. Create a heptagon by its center and by one corner - + Create a heptagon by its center and by one corner @@ -2858,7 +2952,7 @@ Use the sketch validation tool. Create a hexagon by its center and by one corner - + Create a hexagon by its center and by one corner @@ -2867,7 +2961,7 @@ Use the sketch validation tool. Create an octagon by its center and by one corner - + Create an octagon by its center and by one corner @@ -2876,7 +2970,7 @@ Use the sketch validation tool. Create a pentagon by its center and by one corner - + Create a pentagon by its center and by one corner @@ -2885,7 +2979,7 @@ Use the sketch validation tool. Create a square by its center and by one corner - + Create a square by its center and by one corner @@ -2894,7 +2988,7 @@ Use the sketch validation tool. Create an equilateral triangle by its center and by one corner - + Create an equilateral triangle by its center and by one corner @@ -2966,7 +3060,7 @@ Do you want to detach it from the support? Sketcher tools - + Sketcher tools Sketcher geoms diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.qm index df7198cb43..e8c48215d1 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts index 9606ce7724..753dbfa957 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts @@ -11,12 +11,12 @@ Close Shape - + 封閉造型 Produce closed shape by Link end point of element with next elements' starting point - + 藉由連結元素的終點與下一元素的起點來產生封閉造型 @@ -85,27 +85,27 @@ Create a conic - + 建立圓錐 Create a conic in the sketch - + 於素描中建立圓錐 Ellipse by center, major radius, point - + 由中心、主半徑及點來建立橢圓 Ellipse by Periapsis, apoapsis, minor radius - + 由近心點、遠心點及次半徑建立橢圓 Arc of ellipse by center, major radius, endpoints - + 由中心、主半徑及終點來建立橢圓之弧 @@ -118,42 +118,42 @@ Create regular polygon - + 建立正多邊形 Create an regular polygon in the sketcher - + 於素描中建立正多邊形 Triangle - + 三角形 Square - + 正方形 Pentagon - + 五角形 Hexagon - + 六角形 Heptagon - + 七角形 Octagon - + 八角形 @@ -166,12 +166,12 @@ Connect Edges - + 連接邊緣 Link end point of element with next elements' starting point - + 連結元素的終點與下一元素的起點 @@ -318,12 +318,12 @@ Constrain InternalAlignment - + Constrain InternalAlignment Constrains an element to be aligned with the internal geometry of another element - + Constrains an element to be aligned with the internal geometry of another element @@ -430,12 +430,12 @@ Constrain refraction (Snell's law') - + Constrain refraction (Snell's law') Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. @@ -568,12 +568,12 @@ Create an arc of ellipse - + 建立橢圓之弧 Create an arc of ellipse in the sketch - + 於素描建立橢圓之弧 @@ -622,12 +622,12 @@ Create ellipse by 3 points - + 由3點建立一橢圓 Create an ellipse by 3 points in the sketch - + 於素描中由3點建立一橢圓 @@ -640,12 +640,12 @@ Create ellipse by center - + 由中心點建立橢圓 Create an ellipse by center in the sketch - + 於素描中由中心點建立橢圓 @@ -680,12 +680,12 @@ Create heptagon - + 建立七角形 Create a heptagon in the sketch - + 於素描中建立七角形 @@ -698,12 +698,12 @@ Create hexagon - + 建立六角形 Create a hexagon in the sketch - + 於素描中建立六角形 @@ -734,12 +734,12 @@ Create octagon - + 建立八角形 Create an octagon in the sketch - + 於素描中建立八角形 @@ -752,12 +752,12 @@ Create pentagon - + 建立五角形 Create a pentagon in the sketch - + 於素描中建立五角形 @@ -846,12 +846,12 @@ Create square - + 建立正方形 Create a square in the sketch - + 於素描中建立正方形 @@ -882,12 +882,12 @@ Create equilateral triangle - + 建立正三角形 Create an equilateral triangle in the sketch - + 於素描中建立正三角形 @@ -905,7 +905,7 @@ Edit the selected sketch - + 編輯所選之素描 @@ -973,7 +973,7 @@ Merge sketches - + 合併素描 @@ -983,7 +983,7 @@ Select at least two sketches, please. - + 請至少選擇兩個素描 @@ -1051,12 +1051,12 @@ Show/hide internal geometry - + 顯示/影藏內部幾何 Show all internal geometry / hide unused internal geometry - + 顯示所有幾何/影藏未使用的內部幾何 @@ -1070,7 +1070,7 @@ Select Conflicting Constraints - + 選取相矛盾之拘束 @@ -1083,12 +1083,12 @@ Select Constraints - + 選擇拘束 Select the constraints associated to the selected elements - + Select the constraints associated to the selected elements @@ -1102,7 +1102,7 @@ Select Elements associated with constraints - + Select Elements associated with constraints @@ -1115,12 +1115,12 @@ Select Horizontal Axis - + 選擇水平軸 Select the horizontal axis - + 選擇水平軸 @@ -1133,12 +1133,12 @@ Select Origin - + Select Origin Select the origin point - + Select the origin point @@ -1152,7 +1152,7 @@ Select Redundant Constraints - + 選取多餘之拘束 @@ -1165,12 +1165,12 @@ Select Vertical Axis - + 選擇垂直軸 Select the vertical axis - + 選擇垂直軸 @@ -1352,7 +1352,7 @@ - + Wrong selection 錯誤的選取 @@ -1387,7 +1387,7 @@ - + Impossible constraint 無法約束 @@ -1458,29 +1458,29 @@ Cannot add a fixed x-coordinate constraint on an external geometry! - + 無法於外部幾何加入固定x座標之拘束! Cannot add a fixed x-coordinate constraint on the root point! - + Cannot add a fixed x-coordinate constraint on the root point! Cannot add a fixed y-coordinate constraint on an external geometry! - + 無法於外部幾何加入固定y座標之拘束! Cannot add a fixed y-coordinate constraint on the root point! - + Cannot add a fixed y-coordinate constraint on the root point! Select one or more arcs or circles from the sketch. - + Select one or more arcs or circles from the sketch. @@ -1490,88 +1490,88 @@ Do you want to share the same radius for all selected elements? - + 您要將所有選取的元素都使用相同的半徑嗎? Select only entities from the sketch. - + 僅選取由素描構成的實體 Select one or two lines from the sketch. Or select two edges and a point. - + Select one or two lines from the sketch. Or select two edges and a point. Parallel lines - + 平行線 An angle constraint cannot be set for two parallel lines. - + An angle constraint cannot be set for two parallel lines. Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Selected objects are not just geometry from one sketch. - + Selected objects are not just geometry from one sketch. Number of selected objects is not 3 (is %1). - + Number of selected objects is not 3 (is %1). Incompatible geometry is selected! - + Incompatible geometry is selected! Select at least one ellipse and one edge from the sketch. - + Select at least one ellipse and one edge from the sketch. Sketch axes cannot be used in internal alignment constraint - + Sketch axes cannot be used in internal alignment constraint You can not internally constraint an ellipse on other ellipse. Select only one ellipse. - + You can not internally constraint an ellipse on other ellipse. Select only one ellipse. Maximum 2 points are supported. - + Maximum 2 points are supported. Maximum 2 lines are supported. - + Maximum 2 lines are supported. Nothing to constraint - + Nothing to constraint Currently all internal geometry of the ellipse is already exposed. - + Currently all internal geometry of the ellipse is already exposed. @@ -1579,39 +1579,39 @@ Extra elements - + 額外的元素 More elements than possible for the given ellipse were provided. These were ignored. - + More elements than possible for the given ellipse were provided. These were ignored. You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. - + You can not internally constraint an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + You can not internally constraint an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. Currently all internal geometry of the arc of ellipse is already exposed. - + Currently all internal geometry of the arc of ellipse is already exposed. More elements than possible for the given arc of ellipse were provided. These were ignored. - + More elements than possible for the given arc of ellipse were provided. These were ignored. Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. Select exactly two vertexes from the sketch. @@ -1716,33 +1716,35 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. perpendicular constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. perpendicular constraint - + Select some geometry from the sketch. Wrong number of selected objects! perpendicular constraint - + Wrong number of selected objects! Error - + 錯誤 With 3 objects, there must be 2 curves and 1 point. tangent constraint - + With 3 objects, there must be 2 curves and 1 point. @@ -1773,19 +1775,21 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. tangent constraint - + There is a number of ways this constraint can be applied. + +Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. Select some geometry from the sketch. tangent constraint - + Select some geometry from the sketch. Wrong number of selected objects! tangent constraint - + Wrong number of selected objects! @@ -1898,7 +1902,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 由素描中選取兩個實體 - + Edit sketch 編輯素描 @@ -1970,39 +1974,39 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select at least two edges from the sketch. - + 由素描中選取至少兩個邊緣 One selected edge is not connectable - + One selected edge is not connectable Closing a shape formed by exactly two lines makes no sense. - + Closing a shape formed by exactly two lines makes no sense. Select elements from a single sketch. - + 由單一素描中選擇元素 No constraint selected - + 尚未選擇拘束 At least one constraint must be selected - + At least one constraint must be selected - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - + Currently internal geometry is only supported for ellipse and arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. @@ -2079,19 +2083,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio Constraint_SnellsLaw - + Refractive index ratio Ratio n2/n1: Constraint_SnellsLaw - + 比例 n2/n1: Change radius - + 修改半徑 @@ -2103,12 +2107,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Refractive index ratio - + Refractive index ratio Ratio n2/n1: - + 比例 n2/n1: @@ -2149,7 +2153,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Unnamed - + 未命名 @@ -2269,11 +2273,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Constraint color - - - - Constrain color - 拘束色彩 + 拘束之色彩 @@ -2339,7 +2339,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::SketcherValidation - + No missing coincidences 無未一致處 @@ -2361,21 +2361,87 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c No invalid constraints - + 無錯誤之拘束 No invalid constraints found - + 未發現錯誤之拘束 Invalid constraints - + 錯誤之拘束 Invalid constraints found + 發現錯誤之拘束 + + + + + + + Reversed external geometry + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +%2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Views -> Report view). + +Click "Swap endpoints in constraints" button to reassign endpoints. Do this only once to sketches created in FreeCAD older than v0.15.??? + + + + + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. + +However, no constraints linking to the endpoints were found. + + + + + No reversed external-geometry arcs were found. + + + + + %1 changes were made to constraints linking to endpoints of reversed arcs. + + + + + + Constraint orientation locking + + + + + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). + + + + + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Views -> Report view). Note that for all future constraints, the locking still defaults to ON. + + + + + + Delete constraints to external geom. + + + + + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? + + + + + All constraints that deal with external geometry were deleted. @@ -2427,47 +2493,47 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Type: - + 類型： Edge - + 邊緣 Starting Point - + 起點 End Point - + 終點 Center Point - + 中心點 Extended Naming - + 附屬命名 Auto-switch to Edge - + 自動切換至邊緣 <html><head/><body><p>&quot;Ctrl&quot;: multiple selection</p><p>&quot;Z&quot;: switch to next valid type</p></body></html> - + <html><head/><body><p>&quot;Ctrl&quot;: 多重選取</p><p>&quot;Z&quot;: 切換至下一個可用之類型e</p></body></html> Elements - + 元素 @@ -2475,7 +2541,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Point - + 點 @@ -2483,7 +2549,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Line - + 線 @@ -2491,7 +2557,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Arc - + 弧 @@ -2499,19 +2565,19 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Circle - + 圓 Ellipse - + 橢圓 Elliptical Arc - + 橢圓弧 @@ -2519,7 +2585,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Other - + 其他 @@ -2539,10 +2605,6 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Grid size: 網格尺寸: - - mm - mm - Grid snap @@ -2655,7 +2717,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 草圖編輯器檢查 - + + Delete constraints to external geom. + + + + Missing coincidences 未一致 @@ -2664,22 +2731,48 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Tolerance: 公差： + + + Reversed external geometry + + + + + Swap endpoints in constraints + + + Constraint orientation locking + + + + + Enable/Update + + + + + Disable + + + + + Find 發現 - - + + Fix 修正 - + Invalid constraints - + 錯誤之拘束 @@ -2687,13 +2780,13 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Invalid sketch - + 錯誤之素描 The sketch is invalid and cannot be edited. Use the sketch validation tool. - + 此素描錯誤而無法編輯,請使用素描驗證工具 @@ -2723,24 +2816,24 @@ Use the sketch validation tool. Over-constrained sketch - + 過度約束的素描 (click to select) - + (按一下可選擇) Sketch contains conflicting constraints - + 此素描含有相矛盾之拘束 Sketch contains redundant constraints - + 此素描含有過多的拘束 Over-constrained sketch @@ -2813,7 +2906,7 @@ Use the sketch validation tool. Create an arc of ellipse by its center, major radius, endpoints - + 由中心點、主半徑及終點來建立橢圓之弧 @@ -2831,7 +2924,7 @@ Use the sketch validation tool. Create a ellipse by periapsis, apoapsis, and minor radius - + 由近心點、遠心點及次半徑建立橢圓 @@ -2840,7 +2933,7 @@ Use the sketch validation tool. Create an ellipse by center, major radius and point - + 由中心點、主半徑及終點來建立橢圓 @@ -2849,7 +2942,7 @@ Use the sketch validation tool. Create a heptagon by its center and by one corner - + 以中心點及一角來建立七角形 @@ -2858,7 +2951,7 @@ Use the sketch validation tool. Create a hexagon by its center and by one corner - + 以中心點及一角來建立六角形 @@ -2867,7 +2960,7 @@ Use the sketch validation tool. Create an octagon by its center and by one corner - + 以中心點及一角來建立八角形 @@ -2876,7 +2969,7 @@ Use the sketch validation tool. Create a pentagon by its center and by one corner - + 以中心點及一角來建立五角形 @@ -2885,7 +2978,7 @@ Use the sketch validation tool. Create a square by its center and by one corner - + 以中心點及一角來建立正方形 @@ -2894,7 +2987,7 @@ Use the sketch validation tool. Create an equilateral triangle by its center and by one corner - + 以中心點及一角來建立正三角形 @@ -2966,7 +3059,7 @@ Do you want to detach it from the support? Sketcher tools - + 素描工具 Sketcher geoms diff --git a/src/Mod/Spreadsheet/Gui/Resources/Spreadsheet.qrc b/src/Mod/Spreadsheet/Gui/Resources/Spreadsheet.qrc index 0a7cbc1a63..215b769083 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/Spreadsheet.qrc +++ b/src/Mod/Spreadsheet/Gui/Resources/Spreadsheet.qrc @@ -15,5 +15,27 @@ icons/SpreadsheetStyleUnderline.svg icons/SpreadsheetStyleItalic.svg icons/SpreadsheetStyleBold.svg + translations/Spreadsheet_de.qm + translations/Spreadsheet_af.qm + translations/Spreadsheet_zh-CN.qm + translations/Spreadsheet_zh-TW.qm + translations/Spreadsheet_hr.qm + translations/Spreadsheet_cs.qm + translations/Spreadsheet_nl.qm + translations/Spreadsheet_fi.qm + translations/Spreadsheet_fr.qm + translations/Spreadsheet_hu.qm + translations/Spreadsheet_ja.qm + translations/Spreadsheet_no.qm + translations/Spreadsheet_pl.qm + translations/Spreadsheet_pt-PT.qm + translations/Spreadsheet_ro.qm + translations/Spreadsheet_ru.qm + translations/Spreadsheet_sr.qm + translations/Spreadsheet_es-ES.qm + translations/Spreadsheet_sv-SE.qm + translations/Spreadsheet_uk.qm + translations/Spreadsheet_it.qm + translations/Spreadsheet_pt-BR.qm diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_af.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_af.qm new file mode 100644 index 0000000000..4020d235bc Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_af.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_af.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_af.ts new file mode 100644 index 0000000000..564542b233 --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_af.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + Spreadsheet + + + Create spreadsheet + Create spreadsheet + + + Create a new spreadsheet + Create a new spreadsheet + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + Spreadsheet + + + Align bottom + Align bottom + + + Bottom-align contents of selected cells + Bottom-align contents of selected cells + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + Spreadsheet + + + Align center + Align center + + + Center-align contents of selected cells + Center-align contents of selected cells + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + Spreadsheet + + + Align left + Align left + + + Left-align contents of selected cells + Left-align contents of selected cells + + + + CmdSpreadsheetAlignRight + + Spreadsheet + Spreadsheet + + + Align right + Align right + + + Right-align contents of selected cells + Right-align contents of selected cells + + + + CmdSpreadsheetAlignTop + + Spreadsheet + Spreadsheet + + + Align top + Align top + + + Top-align contents of selected cells + Top-align contents of selected cells + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + Spreadsheet + + + Vertically center-align + Vertically center-align + + + Center-align contents vertically of selected cells + Center-align contents vertically of selected cells + + + + CmdSpreadsheetExport + + Spreadsheet + Spreadsheet + + + Export spreadsheet + Export spreadsheet + + + Export spreadsheet to CSV file + Export spreadsheet to CSV file + + + + CmdSpreadsheetImport + + Spreadsheet + Spreadsheet + + + Import spreadsheet + Import spreadsheet + + + Import CSV file into spreadsheet + Import CSV file into spreadsheet + + + + CmdSpreadsheetMergeCells + + Spreadsheet + Spreadsheet + + + Merge cells + Merge cells + + + Merge selected cells in spreadsheet + Merge selected cells in spreadsheet + + + + CmdSpreadsheetSplitCell + + Spreadsheet + Spreadsheet + + + Split cell + Split cell + + + Split previously merged cells in spreadsheet + Split previously merged cells in spreadsheet + + + + CmdSpreadsheetStyleBold + + Spreadsheet + Spreadsheet + + + Bold text + Bold text + + + Set bold text in selected cells + Set bold text in selected cells + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + Spreadsheet + + + Italic text + Italic text + + + Set italic text in selected cells + Set italic text in selected cells + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + Spreadsheet + + + Underline text + Underline text + + + Set underline text in selected cells + Set underline text in selected cells + + + + ColorPickerPopup + + Custom + Custom + + + + PropertiesDialog + + Cell properties + Cell properties + + + &Color + &Color + + + Text + Teks + + + Background + Background + + + &Alignment + &Alignment + + + Horizontal + Horisontaal + + + Left + Links + + + Center + Center + + + Right + Regs + + + Vertical + Vertikaal + + + Top + Bo-aansig + + + Bottom + Bodem + + + &Style + &Style + + + Bold + Bold + + + Italic + Italic + + + Underline + Underline + + + &Display unit + &Display unit + + + Unit string + Unit string + + + A&lias + A&lias + + + Alias for this cell + Alias for this cell + + + + QObject + + All (*) + All (*) + + + Import file + Voer lêer in + + + Export file + Voer lêer uit + + + Cell contents + Cell contents + + + Show spreadsheet + Show spreadsheet + + + + QtColorPicker + + Black + Swart + + + White + Wit + + + Red + Red + + + Dark red + Dark red + + + Green + Green + + + Dark green + Dark green + + + Blue + Blue + + + Dark blue + Dark blue + + + Cyan + Cyan + + + Dark cyan + Dark cyan + + + Magenta + Magenta + + + Dark magenta + Dark magenta + + + Yellow + Yellow + + + Dark yellow + Dark yellow + + + Gray + Gray + + + Dark gray + Dark gray + + + Light gray + Light gray + + + Custom + Custom + + + + Sheet + + Form + Vorm + + + &Contents + &Contents + + + + SpreadsheetGui::SheetTableView + + Insert rows + Insert rows + + + Remove rows + Remove rows + + + Insert columns + Insert columns + + + Remove columns + Remove columns + + + Properties... + Properties... + + + + Workbench + + Spreadsheet + Spreadsheet + + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.qm new file mode 100644 index 0000000000..f4bbb051ed Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts new file mode 100644 index 0000000000..531f34da57 --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + Spreadsheet + + + Create spreadsheet + Create spreadsheet + + + Create a new spreadsheet + Create a new spreadsheet + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + Spreadsheet + + + Align bottom + Align bottom + + + Bottom-align contents of selected cells + Bottom-align contents of selected cells + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + Spreadsheet + + + Align center + Align center + + + Center-align contents of selected cells + Center-align contents of selected cells + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + Spreadsheet + + + Align left + Align left + + + Left-align contents of selected cells + Left-align contents of selected cells + + + + CmdSpreadsheetAlignRight + + Spreadsheet + Spreadsheet + + + Align right + Align right + + + Right-align contents of selected cells + Right-align contents of selected cells + + + + CmdSpreadsheetAlignTop + + Spreadsheet + Spreadsheet + + + Align top + Align top + + + Top-align contents of selected cells + Top-align contents of selected cells + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + Spreadsheet + + + Vertically center-align + Vertically center-align + + + Center-align contents vertically of selected cells + Center-align contents vertically of selected cells + + + + CmdSpreadsheetExport + + Spreadsheet + Spreadsheet + + + Export spreadsheet + Export spreadsheet + + + Export spreadsheet to CSV file + Export spreadsheet to CSV file + + + + CmdSpreadsheetImport + + Spreadsheet + Spreadsheet + + + Import spreadsheet + Import spreadsheet + + + Import CSV file into spreadsheet + Import CSV file into spreadsheet + + + + CmdSpreadsheetMergeCells + + Spreadsheet + Spreadsheet + + + Merge cells + Merge cells + + + Merge selected cells in spreadsheet + Merge selected cells in spreadsheet + + + + CmdSpreadsheetSplitCell + + Spreadsheet + Spreadsheet + + + Split cell + Split cell + + + Split previously merged cells in spreadsheet + Split previously merged cells in spreadsheet + + + + CmdSpreadsheetStyleBold + + Spreadsheet + Spreadsheet + + + Bold text + Bold text + + + Set bold text in selected cells + Set bold text in selected cells + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + Spreadsheet + + + Italic text + Italic text + + + Set italic text in selected cells + Set italic text in selected cells + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + Spreadsheet + + + Underline text + Underline text + + + Set underline text in selected cells + Set underline text in selected cells + + + + ColorPickerPopup + + Custom + Custom + + + + PropertiesDialog + + Cell properties + Cell properties + + + &Color + &Color + + + Text + Text + + + Background + Background + + + &Alignment + &Alignment + + + Horizontal + Vodorovně + + + Left + Vlevo + + + Center + Střed + + + Right + Vpravo + + + Vertical + Svisle + + + Top + Horní + + + Bottom + Dole + + + &Style + &Style + + + Bold + Bold + + + Italic + Italic + + + Underline + Underline + + + &Display unit + &Display unit + + + Unit string + Unit string + + + A&lias + A&lias + + + Alias for this cell + Alias for this cell + + + + QObject + + All (*) + All (*) + + + Import file + Importovat soubor + + + Export file + Exportovat soubor + + + Cell contents + Cell contents + + + Show spreadsheet + Show spreadsheet + + + + QtColorPicker + + Black + Černá + + + White + Bílá + + + Red + Red + + + Dark red + Dark red + + + Green + Green + + + Dark green + Dark green + + + Blue + Blue + + + Dark blue + Dark blue + + + Cyan + Cyan + + + Dark cyan + Dark cyan + + + Magenta + Magenta + + + Dark magenta + Dark magenta + + + Yellow + Yellow + + + Dark yellow + Dark yellow + + + Gray + Gray + + + Dark gray + Dark gray + + + Light gray + Light gray + + + Custom + Custom + + + + Sheet + + Form + Návrh + + + &Contents + &Contents + + + + SpreadsheetGui::SheetTableView + + Insert rows + Insert rows + + + Remove rows + Remove rows + + + Insert columns + Insert columns + + + Remove columns + Remove columns + + + Properties... + Properties... + + + + Workbench + + Spreadsheet + Spreadsheet + + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.qm new file mode 100644 index 0000000000..6800e2f6d2 Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.ts new file mode 100644 index 0000000000..aeec1fe035 --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_de.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + Kalkulationstabelle + + + Create spreadsheet + Erstelle Kalkulationstabelle + + + Create a new spreadsheet + Erstelle neue Kalkulationstabelle + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + Kalkulationstabelle + + + Align bottom + Unten Ausrichten + + + Bottom-align contents of selected cells + Richtet den Inhalt der ausgewählten Zelle am Boden aus + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + Kalkulationstabelle + + + Align center + Zentral Ausrichten + + + Center-align contents of selected cells + Richtet den Inhalt der gewählten Zelle am Zentrum aus + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + Kalkulationstabelle + + + Align left + Links Ausrichten + + + Left-align contents of selected cells + Richtet den Inhalt der gewählten Zelle am linken Rand aus + + + + CmdSpreadsheetAlignRight + + Spreadsheet + Kalkulationstabelle + + + Align right + Rechts Ausrichten + + + Right-align contents of selected cells + Richtet den Inhalt der gewählten Zelle am rechten Rand aus + + + + CmdSpreadsheetAlignTop + + Spreadsheet + Kalkulationstabelle + + + Align top + Oben Ausrichten + + + Top-align contents of selected cells + Richtet den Inhalt der gewählten Zelle an der oberen Kante aus + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + Kalkulationstabelle + + + Vertically center-align + Vertikal zentral Ausrichten + + + Center-align contents vertically of selected cells + Richtet den Inhalt der gewählten Zelle vertikal am Zentrum aus + + + + CmdSpreadsheetExport + + Spreadsheet + Kalkulationstabelle + + + Export spreadsheet + Exportiere Kalkulationstabelle + + + Export spreadsheet to CSV file + Exportiere Kalkulationstabelle in CSV Datei + + + + CmdSpreadsheetImport + + Spreadsheet + Kalkulationstabelle + + + Import spreadsheet + Importiere Kalkulationstabelle + + + Import CSV file into spreadsheet + Importiere CSV Datei in Kalkulationstabelle + + + + CmdSpreadsheetMergeCells + + Spreadsheet + Kalkulationstabelle + + + Merge cells + Zellen verbinden + + + Merge selected cells in spreadsheet + Verbindet ausgewählte Zellen in der Tabelle + + + + CmdSpreadsheetSplitCell + + Spreadsheet + Kalkulationstabelle + + + Split cell + Trenne Zellen + + + Split previously merged cells in spreadsheet + Trennt vorher zusammengefügte Zellen in der Tabelle + + + + CmdSpreadsheetStyleBold + + Spreadsheet + Kalkulationstabelle + + + Bold text + Fett formatierter Text + + + Set bold text in selected cells + Druckt Text in den gewählten Zellen fett + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + Kalkulationstabelle + + + Italic text + Kursiver Text + + + Set italic text in selected cells + Druckt Text in den gewählten Zellen kursiv + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + Kalkulationstabelle + + + Underline text + Unterstrichener Text + + + Set underline text in selected cells + Unterstreicht Text in den gewählten Zellen + + + + ColorPickerPopup + + Custom + Benutzerdefiniert + + + + PropertiesDialog + + Cell properties + Zelleigenschaften + + + &Color + &Farbe + + + Text + Text + + + Background + Hintergrund + + + &Alignment + &Ausrichtung + + + Horizontal + Horizontale + + + Left + Links + + + Center + Mittelpunkt + + + Right + Rechts + + + Vertical + Vertikale + + + Top + Oben + + + Bottom + Unten + + + &Style + &Stil + + + Bold + Fett + + + Italic + Kursiv + + + Underline + Unterstrichen + + + &Display unit + &Zeige Einheit + + + Unit string + Einheit + + + A&lias + &Alias + + + Alias for this cell + Alias für diese Zelle + + + + QObject + + All (*) + Alle (*) + + + Import file + Importiere Datei + + + Export file + Exportiere Datei + + + Cell contents + Zellinhalt + + + Show spreadsheet + Zeige Kalkulationstabelle + + + + QtColorPicker + + Black + Schwarz + + + White + Weiß + + + Red + Rot + + + Dark red + Dunkles Rot + + + Green + Green + + + Dark green + Dunkles Grün + + + Blue + Blau + + + Dark blue + Dunkles Blau + + + Cyan + Cyan + + + Dark cyan + Dunkles Cyan + + + Magenta + Magenta + + + Dark magenta + Dunkles Magenta + + + Yellow + Gelb + + + Dark yellow + Dunkles Gelb + + + Gray + Grau + + + Dark gray + Dunkles Grau + + + Light gray + Helles Grau + + + Custom + Benutzerdefiniert + + + + Sheet + + Form + Form + + + &Contents + &Inhalt + + + + SpreadsheetGui::SheetTableView + + Insert rows + Reihen einfügen + + + Remove rows + Reihen entfernen + + + Insert columns + Spalten einfügen + + + Remove columns + Spalten entfernen + + + Properties... + Eigenschaften... + + + + Workbench + + Spreadsheet + Kalkulationstabelle + + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.qm new file mode 100644 index 0000000000..7f4c81de19 Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.ts new file mode 100644 index 0000000000..ff27f8d6bf --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_es-ES.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + Hoja de cálculo + + + Create spreadsheet + Crear hoja de cálculo + + + Create a new spreadsheet + Crear una hoja de cálculo nueva + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + Hoja de cálculo + + + Align bottom + Alineación inferior + + + Bottom-align contents of selected cells + Alineado inferior del contenido de las celdas seleccionadas + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + Hoja de cálculo + + + Align center + Alineado centrado + + + Center-align contents of selected cells + Alineado centrado del contenido de las celdas seleccionadas + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + Hoja de cálculo + + + Align left + Alineado izquierdo + + + Left-align contents of selected cells + Alineado izquierdo del contenido de las celdas seleccionadas + + + + CmdSpreadsheetAlignRight + + Spreadsheet + Hoja de cálculo + + + Align right + Alineado derecho + + + Right-align contents of selected cells + Alineado derecho del contenido de las celdas seleccionadas + + + + CmdSpreadsheetAlignTop + + Spreadsheet + Hoja de cálculo + + + Align top + Alineado superior + + + Top-align contents of selected cells + Alineado superior del contenido de las celdas seleccionadas + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + Hoja de cálculo + + + Vertically center-align + Centrar verticalmente + + + Center-align contents vertically of selected cells + Centra verticalmente el conetnido de las celdas seleccionadas + + + + CmdSpreadsheetExport + + Spreadsheet + Hoja de cálculo + + + Export spreadsheet + Exportar hoja de cálculo + + + Export spreadsheet to CSV file + Exportar hoja de cálculo como archivo CSV + + + + CmdSpreadsheetImport + + Spreadsheet + Hoja de cálculo + + + Import spreadsheet + Importar hoja de cálculo + + + Import CSV file into spreadsheet + Inportar archivo CSV en la hoja de cálculo + + + + CmdSpreadsheetMergeCells + + Spreadsheet + Hoja de cálculo + + + Merge cells + Combinar celdas + + + Merge selected cells in spreadsheet + Combinar las celdas seleccionadas en la hoja de cálculo + + + + CmdSpreadsheetSplitCell + + Spreadsheet + Hoja de cálculo + + + Split cell + Dividir celda + + + Split previously merged cells in spreadsheet + Dividir celdas combinadas previamente en la hoja de cálculo + + + + CmdSpreadsheetStyleBold + + Spreadsheet + Hoja de cálculo + + + Bold text + Negrita + + + Set bold text in selected cells + Texto en negrita en las celdas seleccionadas + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + Hoja de cálculo + + + Italic text + Cursiva + + + Set italic text in selected cells + Texto en cursiva en las celdas seleccionadas + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + Hoja de cálculo + + + Underline text + Subrayado + + + Set underline text in selected cells + Texto subrayado en las celdas seleccionadas + + + + ColorPickerPopup + + Custom + Personalizado + + + + PropertiesDialog + + Cell properties + Propiedades de la celda + + + &Color + &Color + + + Text + Texto + + + Background + Fondo + + + &Alignment + &Alineacion + + + Horizontal + Horizontal + + + Left + Izquierda + + + Center + Centro + + + Right + Derecha + + + Vertical + Vertical + + + Top + Planta + + + Bottom + Inferior + + + &Style + &Estilo + + + Bold + Negrita + + + Italic + Cursiva + + + Underline + Subrayado + + + &Display unit + &Mostrar unidad + + + Unit string + Cadena de unidad + + + A&lias + A&lias + + + Alias for this cell + Alias para esta celda + + + + QObject + + All (*) + Todos (*) + + + Import file + Importar archivo + + + Export file + Exportar archivo + + + Cell contents + Contenido de la celda + + + Show spreadsheet + Mostrar la hoja de cálculo + + + + QtColorPicker + + Black + Negro + + + White + Blanco + + + Red + Rojo + + + Dark red + Rojo oscuro + + + Green + Verde + + + Dark green + Verde oscuro + + + Blue + Azul + + + Dark blue + Azul oscuro + + + Cyan + Cyab + + + Dark cyan + Cyan oscuro + + + Magenta + Magenta + + + Dark magenta + Magenta oscuro + + + Yellow + Amarillo + + + Dark yellow + Amarillo oscuro + + + Gray + Gris + + + Dark gray + Gris oscuro + + + Light gray + Gris claro + + + Custom + Personalizado + + + + Sheet + + Form + Formulario + + + &Contents + &Contenido + + + + SpreadsheetGui::SheetTableView + + Insert rows + Insertar fila + + + Remove rows + Eliminar fila + + + Insert columns + Insertar columnas + + + Remove columns + Eliminar columnas + + + Properties... + Propiedades... + + + + Workbench + + Spreadsheet + Hoja de cálculo + + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fi.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fi.qm new file mode 100644 index 0000000000..23318b4bb5 Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fi.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fi.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fi.ts new file mode 100644 index 0000000000..b48cb778e7 --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fi.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + Taulukkolaskenta + + + Create spreadsheet + Luo laskentataulukko + + + Create a new spreadsheet + Luo uusi laskentataulukko + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + Taulukkolaskenta + + + Align bottom + Tasaa alareunaan + + + Bottom-align contents of selected cells + Tasaa alareunaan valittujen solujen sisältö + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + Taulukkolaskenta + + + Align center + Tasaa keskelle + + + Center-align contents of selected cells + Tasaa keskelle valittujen solujen sisältö + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + Taulukkolaskenta + + + Align left + Tasaa vasemmalle + + + Left-align contents of selected cells + Tasaa vasemmalle valittujen solujen sisältö + + + + CmdSpreadsheetAlignRight + + Spreadsheet + Taulukkolaskenta + + + Align right + Tasaa oikealle + + + Right-align contents of selected cells + Tasaa oikealle valittujen solujen sisältö + + + + CmdSpreadsheetAlignTop + + Spreadsheet + Taulukkolaskenta + + + Align top + Tasaa yläreunaan + + + Top-align contents of selected cells + Tasaa yläreunaan valittujen solujen sisältö + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + Taulukkolaskenta + + + Vertically center-align + Pystysuoraan tasaus keskelle + + + Center-align contents vertically of selected cells + Tasaa yläreunaan pystysuorassa valittujen solujen sisältö + + + + CmdSpreadsheetExport + + Spreadsheet + Taulukkolaskenta + + + Export spreadsheet + Vie laskentataulukko + + + Export spreadsheet to CSV file + Vie laskentataulukko CSV-tiedostoon + + + + CmdSpreadsheetImport + + Spreadsheet + Taulukkolaskenta + + + Import spreadsheet + Tuo laskentataulukko + + + Import CSV file into spreadsheet + Tuo CSV tiedosto laskentataulukkoon + + + + CmdSpreadsheetMergeCells + + Spreadsheet + Taulukkolaskenta + + + Merge cells + Yhdistä solut + + + Merge selected cells in spreadsheet + Yhdistä valitut solut laskentataulukossa + + + + CmdSpreadsheetSplitCell + + Spreadsheet + Taulukkolaskenta + + + Split cell + Jaa solu + + + Split previously merged cells in spreadsheet + Jaa laskentataulukon aiemmin yhdistetyt solut + + + + CmdSpreadsheetStyleBold + + Spreadsheet + Taulukkolaskenta + + + Bold text + Lihavoitu teksti + + + Set bold text in selected cells + Määritä lihavoitu teksti valituissa soluissa + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + Taulukkolaskenta + + + Italic text + Kursivoitu teksti + + + Set italic text in selected cells + Määritä kursivoitu teksti valituissa soluissa + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + Taulukkolaskenta + + + Underline text + Alleviivaa teksti + + + Set underline text in selected cells + Määritä alleviivattu teksti valituissa soluissa + + + + ColorPickerPopup + + Custom + Mukautettu + + + + PropertiesDialog + + Cell properties + Solun ominaisuudet + + + &Color + &Väri + + + Text + Teksti + + + Background + Tausta + + + &Alignment + &Tasaus + + + Horizontal + Vaakasuora + + + Left + Vasen + + + Center + Keskikohta + + + Right + Oikea + + + Vertical + Pystysuora + + + Top + Yläpuoli + + + Bottom + Pohja + + + &Style + &Tyyli + + + Bold + Lihavoitu + + + Italic + Kursivoitu + + + Underline + Alleviivaus + + + &Display unit + & Näyttöyksikkö + + + Unit string + Yksikkömerkkijono + + + A&lias + A&lias + + + Alias for this cell + Aliasnimi tälle solulle + + + + QObject + + All (*) + Kaikki (*) + + + Import file + Tuo tiedosto + + + Export file + Vie tiedosto + + + Cell contents + Solun sisältö + + + Show spreadsheet + Näytä laskentataulukko + + + + QtColorPicker + + Black + Musta + + + White + Valkoinen + + + Red + Punainen + + + Dark red + Tummanpunainen + + + Green + Vihreä + + + Dark green + Tummanvihreä + + + Blue + Sininen + + + Dark blue + Tummansininen + + + Cyan + Sinivihreä + + + Dark cyan + Tumman sinivihreä + + + Magenta + Purppura (magenta) + + + Dark magenta + Tumma purppura (t.magenta) + + + Yellow + Keltainen + + + Dark yellow + Tummankeltainen + + + Gray + Harmaa + + + Dark gray + Tummanharmaa + + + Light gray + Vaaleanharmaa + + + Custom + Mukautettu + + + + Sheet + + Form + Lomake + + + &Contents + &Sisältö + + + + SpreadsheetGui::SheetTableView + + Insert rows + Lisää rivejä + + + Remove rows + Poista rivejä + + + Insert columns + Lisää sarakkeita + + + Remove columns + Poista sarakkeita + + + Properties... + Ominaisuudet... + + + + Workbench + + Spreadsheet + Taulukkolaskenta + + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.qm new file mode 100644 index 0000000000..265153e89b Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.ts new file mode 100644 index 0000000000..080e8ff3c2 --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_fr.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + Tableur + + + Create spreadsheet + Créer une feuille de calcul + + + Create a new spreadsheet + Créer une nouvelle feuille de calcul + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + Tableur + + + Align bottom + Aligner en bas + + + Bottom-align contents of selected cells + Aligne le contenu des cellules sélectionnées en bas + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + Tableur + + + Align center + Alignement au centre + + + Center-align contents of selected cells + Aligne le contenu des cellules sélectionnées au centre + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + Tableur + + + Align left + Alignement à gauche + + + Left-align contents of selected cells + Aligne le contenu des cellules sélectionnées à gauche + + + + CmdSpreadsheetAlignRight + + Spreadsheet + Tableur + + + Align right + Alignement à droite + + + Right-align contents of selected cells + Aligne le contenu des cellules sélectionnées à droite + + + + CmdSpreadsheetAlignTop + + Spreadsheet + Tableur + + + Align top + Alignement en haut + + + Top-align contents of selected cells + Aligne le contenu des cellules sélectionnées en haut + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + Tableur + + + Vertically center-align + Alignement vertical au centre + + + Center-align contents vertically of selected cells + Aligner le contenu des cellules sélectionnées au centre verticalement + + + + CmdSpreadsheetExport + + Spreadsheet + Tableur + + + Export spreadsheet + Exporter la feuille de calcul + + + Export spreadsheet to CSV file + Exporter la feuille de calcul vers un fichier CSV + + + + CmdSpreadsheetImport + + Spreadsheet + Tableur + + + Import spreadsheet + Importer une feuille de calcul + + + Import CSV file into spreadsheet + Importer un fichier CSV dans une feuille de calcul + + + + CmdSpreadsheetMergeCells + + Spreadsheet + Tableur + + + Merge cells + Fusionner des cellules + + + Merge selected cells in spreadsheet + Fusionner les cellules sélectionnées dans la feuille de calcul + + + + CmdSpreadsheetSplitCell + + Spreadsheet + Tableur + + + Split cell + Diviser la cellule + + + Split previously merged cells in spreadsheet + Diviser les cellules précédemment fusionnées dans la feuille de calcul + + + + CmdSpreadsheetStyleBold + + Spreadsheet + Tableur + + + Bold text + Texte en gras + + + Set bold text in selected cells + Mettre le texte en gras dans les cellules sélectionnées + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + Tableur + + + Italic text + Texte en italique + + + Set italic text in selected cells + Mettre le texte en italique dans les cellules sélectionnées + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + Tableur + + + Underline text + Texte souligné + + + Set underline text in selected cells + Souligner le texte des cellules sélectionnées + + + + ColorPickerPopup + + Custom + Personnalisé + + + + PropertiesDialog + + Cell properties + Propriétés de la cellule + + + &Color + &Couleur + + + Text + Texte + + + Background + Arrière-plan + + + &Alignment + &Alignement + + + Horizontal + Horizontal + + + Left + Gauche + + + Center + Centre + + + Right + Droit + + + Vertical + Vertical + + + Top + Dessus + + + Bottom + Dessous + + + &Style + &Style + + + Bold + Gras + + + Italic + Italique + + + Underline + Souligné + + + &Display unit + &Affichage unités + + + Unit string + Texte unité + + + A&lias + A&lias + + + Alias for this cell + Alias pour cette cellule + + + + QObject + + All (*) + Tous (*) + + + Import file + Importer un fichier + + + Export file + Exporter un fichier + + + Cell contents + Contenu de la cellule + + + Show spreadsheet + Voir la feuille de calcul + + + + QtColorPicker + + Black + Noir + + + White + Blanc + + + Red + Rouge + + + Dark red + Rouge foncé + + + Green + Vert + + + Dark green + Vert foncé + + + Blue + Bleu + + + Dark blue + Bleu foncé + + + Cyan + Cyan + + + Dark cyan + Cyan foncé + + + Magenta + Magenta + + + Dark magenta + Magenta foncé + + + Yellow + Jaune + + + Dark yellow + Jaune foncé + + + Gray + Gris + + + Dark gray + Gris foncé + + + Light gray + Gris clair + + + Custom + Personnalisé + + + + Sheet + + Form + Forme + + + &Contents + &Contenu + + + + SpreadsheetGui::SheetTableView + + Insert rows + Insérer des lignes + + + Remove rows + Supprimer des lignes + + + Insert columns + Insérer des colonnes + + + Remove columns + Supprimer des colonnes + + + Properties... + Propriétés... + + + + Workbench + + Spreadsheet + Tableur + + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hr.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hr.qm new file mode 100644 index 0000000000..af056301a6 Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hr.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hr.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hr.ts new file mode 100644 index 0000000000..2a32f074ba --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hr.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + Spreadsheet + + + Create spreadsheet + Create spreadsheet + + + Create a new spreadsheet + Create a new spreadsheet + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + Spreadsheet + + + Align bottom + Align bottom + + + Bottom-align contents of selected cells + Bottom-align contents of selected cells + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + Spreadsheet + + + Align center + Align center + + + Center-align contents of selected cells + Center-align contents of selected cells + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + Spreadsheet + + + Align left + Align left + + + Left-align contents of selected cells + Left-align contents of selected cells + + + + CmdSpreadsheetAlignRight + + Spreadsheet + Spreadsheet + + + Align right + Align right + + + Right-align contents of selected cells + Right-align contents of selected cells + + + + CmdSpreadsheetAlignTop + + Spreadsheet + Spreadsheet + + + Align top + Align top + + + Top-align contents of selected cells + Top-align contents of selected cells + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + Spreadsheet + + + Vertically center-align + Vertically center-align + + + Center-align contents vertically of selected cells + Center-align contents vertically of selected cells + + + + CmdSpreadsheetExport + + Spreadsheet + Spreadsheet + + + Export spreadsheet + Export spreadsheet + + + Export spreadsheet to CSV file + Export spreadsheet to CSV file + + + + CmdSpreadsheetImport + + Spreadsheet + Spreadsheet + + + Import spreadsheet + Import spreadsheet + + + Import CSV file into spreadsheet + Import CSV file into spreadsheet + + + + CmdSpreadsheetMergeCells + + Spreadsheet + Spreadsheet + + + Merge cells + Merge cells + + + Merge selected cells in spreadsheet + Merge selected cells in spreadsheet + + + + CmdSpreadsheetSplitCell + + Spreadsheet + Spreadsheet + + + Split cell + Split cell + + + Split previously merged cells in spreadsheet + Split previously merged cells in spreadsheet + + + + CmdSpreadsheetStyleBold + + Spreadsheet + Spreadsheet + + + Bold text + Bold text + + + Set bold text in selected cells + Set bold text in selected cells + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + Spreadsheet + + + Italic text + Italic text + + + Set italic text in selected cells + Set italic text in selected cells + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + Spreadsheet + + + Underline text + Underline text + + + Set underline text in selected cells + Set underline text in selected cells + + + + ColorPickerPopup + + Custom + Custom + + + + PropertiesDialog + + Cell properties + Cell properties + + + &Color + &Color + + + Text + Tekst + + + Background + Background + + + &Alignment + &Alignment + + + Horizontal + Vodoravno + + + Left + Lijevo + + + Center + Center + + + Right + Desno + + + Vertical + Okomito + + + Top + Gore + + + Bottom + Ispod + + + &Style + &Style + + + Bold + Bold + + + Italic + Italic + + + Underline + Underline + + + &Display unit + &Display unit + + + Unit string + Unit string + + + A&lias + A&lias + + + Alias for this cell + Alias for this cell + + + + QObject + + All (*) + All (*) + + + Import file + Uvoz datoteke + + + Export file + Izvoz datoteke + + + Cell contents + Cell contents + + + Show spreadsheet + Show spreadsheet + + + + QtColorPicker + + Black + Crna + + + White + Bijela + + + Red + Red + + + Dark red + Dark red + + + Green + Green + + + Dark green + Dark green + + + Blue + Blue + + + Dark blue + Dark blue + + + Cyan + Cyan + + + Dark cyan + Dark cyan + + + Magenta + Magenta + + + Dark magenta + Dark magenta + + + Yellow + Yellow + + + Dark yellow + Dark yellow + + + Gray + Gray + + + Dark gray + Dark gray + + + Light gray + Light gray + + + Custom + Custom + + + + Sheet + + Form + Obrazac + + + &Contents + &Contents + + + + SpreadsheetGui::SheetTableView + + Insert rows + Insert rows + + + Remove rows + Remove rows + + + Insert columns + Insert columns + + + Remove columns + Remove columns + + + Properties... + Properties... + + + + Workbench + + Spreadsheet + Spreadsheet + + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hu.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hu.qm new file mode 100644 index 0000000000..08f1a0f375 Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hu.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hu.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hu.ts new file mode 100644 index 0000000000..6213544092 --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_hu.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + Spreadsheet + + + Create spreadsheet + Create spreadsheet + + + Create a new spreadsheet + Create a new spreadsheet + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + Spreadsheet + + + Align bottom + Align bottom + + + Bottom-align contents of selected cells + Bottom-align contents of selected cells + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + Spreadsheet + + + Align center + Align center + + + Center-align contents of selected cells + Center-align contents of selected cells + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + Spreadsheet + + + Align left + Align left + + + Left-align contents of selected cells + Left-align contents of selected cells + + + + CmdSpreadsheetAlignRight + + Spreadsheet + Spreadsheet + + + Align right + Align right + + + Right-align contents of selected cells + Right-align contents of selected cells + + + + CmdSpreadsheetAlignTop + + Spreadsheet + Spreadsheet + + + Align top + Align top + + + Top-align contents of selected cells + Top-align contents of selected cells + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + Spreadsheet + + + Vertically center-align + Vertically center-align + + + Center-align contents vertically of selected cells + Center-align contents vertically of selected cells + + + + CmdSpreadsheetExport + + Spreadsheet + Spreadsheet + + + Export spreadsheet + Export spreadsheet + + + Export spreadsheet to CSV file + Export spreadsheet to CSV file + + + + CmdSpreadsheetImport + + Spreadsheet + Spreadsheet + + + Import spreadsheet + Import spreadsheet + + + Import CSV file into spreadsheet + Import CSV file into spreadsheet + + + + CmdSpreadsheetMergeCells + + Spreadsheet + Spreadsheet + + + Merge cells + Merge cells + + + Merge selected cells in spreadsheet + Merge selected cells in spreadsheet + + + + CmdSpreadsheetSplitCell + + Spreadsheet + Spreadsheet + + + Split cell + Split cell + + + Split previously merged cells in spreadsheet + Split previously merged cells in spreadsheet + + + + CmdSpreadsheetStyleBold + + Spreadsheet + Spreadsheet + + + Bold text + Bold text + + + Set bold text in selected cells + Set bold text in selected cells + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + Spreadsheet + + + Italic text + Italic text + + + Set italic text in selected cells + Set italic text in selected cells + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + Spreadsheet + + + Underline text + Underline text + + + Set underline text in selected cells + Set underline text in selected cells + + + + ColorPickerPopup + + Custom + Custom + + + + PropertiesDialog + + Cell properties + Cell properties + + + &Color + &Color + + + Text + Szöveg + + + Background + Background + + + &Alignment + &Alignment + + + Horizontal + Vízszintes + + + Left + Bal nézet + + + Center + Center + + + Right + Jobb + + + Vertical + Függőleges + + + Top + Felülnézet + + + Bottom + Alsó + + + &Style + &Style + + + Bold + Bold + + + Italic + Italic + + + Underline + Underline + + + &Display unit + &Display unit + + + Unit string + Unit string + + + A&lias + A&lias + + + Alias for this cell + Alias for this cell + + + + QObject + + All (*) + All (*) + + + Import file + Fájl importálása + + + Export file + Fájl exportálása + + + Cell contents + Cell contents + + + Show spreadsheet + Show spreadsheet + + + + QtColorPicker + + Black + Fekete + + + White + Fehér + + + Red + Red + + + Dark red + Dark red + + + Green + Green + + + Dark green + Dark green + + + Blue + Blue + + + Dark blue + Dark blue + + + Cyan + Cyan + + + Dark cyan + Dark cyan + + + Magenta + Magenta + + + Dark magenta + Dark magenta + + + Yellow + Yellow + + + Dark yellow + Dark yellow + + + Gray + Gray + + + Dark gray + Dark gray + + + Light gray + Light gray + + + Custom + Custom + + + + Sheet + + Form + Űrlap + + + &Contents + &Contents + + + + SpreadsheetGui::SheetTableView + + Insert rows + Insert rows + + + Remove rows + Remove rows + + + Insert columns + Insert columns + + + Remove columns + Remove columns + + + Properties... + Properties... + + + + Workbench + + Spreadsheet + Spreadsheet + + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.qm new file mode 100644 index 0000000000..a55ae43846 Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.ts new file mode 100644 index 0000000000..48b36536e8 --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_it.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + Foglio di calcolo + + + Create spreadsheet + Crea un foglio di calcolo + + + Create a new spreadsheet + Crea un nuovo foglio di calcolo + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + Foglio di calcolo + + + Align bottom + Allinea la parte inferiore + + + Bottom-align contents of selected cells + Allinea in basso il contenuto delle celle selezionate + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + Foglio di calcolo + + + Align center + Allinea al centro + + + Center-align contents of selected cells + Centra il contenuto delle celle selezionate + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + Foglio di calcolo + + + Align left + Allinea a sinistra + + + Left-align contents of selected cells + Allinea a sinistra il contenuto delle celle selezionate + + + + CmdSpreadsheetAlignRight + + Spreadsheet + Foglio di calcolo + + + Align right + Allinea a destra + + + Right-align contents of selected cells + Allinea a destra il contenuto delle celle selezionate + + + + CmdSpreadsheetAlignTop + + Spreadsheet + Foglio di calcolo + + + Align top + Allinea in alto + + + Top-align contents of selected cells + Allinea in alto il contenuto delle celle selezionate + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + Foglio di calcolo + + + Vertically center-align + Centra in verticale + + + Center-align contents vertically of selected cells + Allinea verticalmente al centro il contenuto delle celle selezionate + + + + CmdSpreadsheetExport + + Spreadsheet + Foglio di calcolo + + + Export spreadsheet + Esporta il foglio di calcolo + + + Export spreadsheet to CSV file + Esporta il foglio di calcolo in un file CSV + + + + CmdSpreadsheetImport + + Spreadsheet + Foglio di calcolo + + + Import spreadsheet + Importa foglio di calcolo + + + Import CSV file into spreadsheet + File CSV da importare nel foglio di calcolo + + + + CmdSpreadsheetMergeCells + + Spreadsheet + Foglio di calcolo + + + Merge cells + Unisci le celle + + + Merge selected cells in spreadsheet + Unisce le celle selezionate nel foglio di calcolo + + + + CmdSpreadsheetSplitCell + + Spreadsheet + Foglio di calcolo + + + Split cell + Dividi cella + + + Split previously merged cells in spreadsheet + Dividi le celle precedentemente Unite nel foglio di calcolo + + + + CmdSpreadsheetStyleBold + + Spreadsheet + Foglio di calcolo + + + Bold text + Testo in grassetto + + + Set bold text in selected cells + Imposta il testo in grassetto nelle celle selezionate + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + Foglio di calcolo + + + Italic text + Testo in corsivo + + + Set italic text in selected cells + Imposta il testo in corsivo nelle celle selezionate + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + Foglio di calcolo + + + Underline text + Sottolinea il testo + + + Set underline text in selected cells + Imposta la sottolineatura del testo nelle celle selezionate + + + + ColorPickerPopup + + Custom + Personalizza + + + + PropertiesDialog + + Cell properties + Proprietà delle celle + + + &Color + &Colore + + + Text + Testo + + + Background + Sfondo + + + &Alignment + &Allineamento + + + Horizontal + Orizzontale + + + Left + Da sinistra + + + Center + Centro + + + Right + Destra + + + Vertical + Verticale + + + Top + Dall'alto + + + Bottom + Dal basso + + + &Style + &Stile + + + Bold + Grassetto + + + Italic + Corsivo + + + Underline + Sottolineato + + + &Display unit + Unità &di visualizzazione + + + Unit string + Stringa di unità + + + A&lias + A&lias + + + Alias for this cell + Alias per questa cella + + + + QObject + + All (*) + Tutto (*) + + + Import file + Importa file + + + Export file + Esporta file + + + Cell contents + Contenuto della cella + + + Show spreadsheet + Visualizza il foglio di calcolo + + + + QtColorPicker + + Black + Nero + + + White + Bianco + + + Red + Rosso + + + Dark red + Rosso scuro + + + Green + Verde + + + Dark green + Verde scuro + + + Blue + Blu + + + Dark blue + Blu scuro + + + Cyan + Ciano + + + Dark cyan + Ciano scuro + + + Magenta + Magenta + + + Dark magenta + Magenta scuro + + + Yellow + Giallo + + + Dark yellow + Giallo scuro + + + Gray + Grigio + + + Dark gray + Grigio scuro + + + Light gray + Grigio chiaro + + + Custom + Personalizza + + + + Sheet + + Form + Modulo + + + &Contents + &Contenuto + + + + SpreadsheetGui::SheetTableView + + Insert rows + Inserisci righe + + + Remove rows + Rimuovi righe + + + Insert columns + Inserisci colonne + + + Remove columns + Rimuovi colonne + + + Properties... + Proprietà... + + + + Workbench + + Spreadsheet + Foglio di calcolo + + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ja.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ja.qm new file mode 100644 index 0000000000..8732520dbc Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ja.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ja.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ja.ts new file mode 100644 index 0000000000..9c1b1ee40f --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ja.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + Spreadsheet + + + Create spreadsheet + Create spreadsheet + + + Create a new spreadsheet + Create a new spreadsheet + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + Spreadsheet + + + Align bottom + Align bottom + + + Bottom-align contents of selected cells + Bottom-align contents of selected cells + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + Spreadsheet + + + Align center + Align center + + + Center-align contents of selected cells + Center-align contents of selected cells + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + Spreadsheet + + + Align left + Align left + + + Left-align contents of selected cells + Left-align contents of selected cells + + + + CmdSpreadsheetAlignRight + + Spreadsheet + Spreadsheet + + + Align right + Align right + + + Right-align contents of selected cells + Right-align contents of selected cells + + + + CmdSpreadsheetAlignTop + + Spreadsheet + Spreadsheet + + + Align top + Align top + + + Top-align contents of selected cells + Top-align contents of selected cells + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + Spreadsheet + + + Vertically center-align + Vertically center-align + + + Center-align contents vertically of selected cells + Center-align contents vertically of selected cells + + + + CmdSpreadsheetExport + + Spreadsheet + Spreadsheet + + + Export spreadsheet + Export spreadsheet + + + Export spreadsheet to CSV file + Export spreadsheet to CSV file + + + + CmdSpreadsheetImport + + Spreadsheet + Spreadsheet + + + Import spreadsheet + Import spreadsheet + + + Import CSV file into spreadsheet + Import CSV file into spreadsheet + + + + CmdSpreadsheetMergeCells + + Spreadsheet + Spreadsheet + + + Merge cells + Merge cells + + + Merge selected cells in spreadsheet + Merge selected cells in spreadsheet + + + + CmdSpreadsheetSplitCell + + Spreadsheet + Spreadsheet + + + Split cell + Split cell + + + Split previously merged cells in spreadsheet + Split previously merged cells in spreadsheet + + + + CmdSpreadsheetStyleBold + + Spreadsheet + Spreadsheet + + + Bold text + Bold text + + + Set bold text in selected cells + Set bold text in selected cells + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + Spreadsheet + + + Italic text + Italic text + + + Set italic text in selected cells + Set italic text in selected cells + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + Spreadsheet + + + Underline text + Underline text + + + Set underline text in selected cells + Set underline text in selected cells + + + + ColorPickerPopup + + Custom + Custom + + + + PropertiesDialog + + Cell properties + Cell properties + + + &Color + &Color + + + Text + テキスト + + + Background + Background + + + &Alignment + &Alignment + + + Horizontal + 水平方向 + + + Left + 左面図 + + + Center + 中心 + + + Right + 右面図 + + + Vertical + 垂直方向 + + + Top + 上面図 + + + Bottom + 底面 + + + &Style + &Style + + + Bold + Bold + + + Italic + Italic + + + Underline + Underline + + + &Display unit + &Display unit + + + Unit string + Unit string + + + A&lias + A&lias + + + Alias for this cell + Alias for this cell + + + + QObject + + All (*) + All (*) + + + Import file + ファイルをインポート + + + Export file + ファイルのエクスポート + + + Cell contents + Cell contents + + + Show spreadsheet + Show spreadsheet + + + + QtColorPicker + + Black + 黒 + + + White + 白 + + + Red + Red + + + Dark red + Dark red + + + Green + Green + + + Dark green + Dark green + + + Blue + Blue + + + Dark blue + Dark blue + + + Cyan + Cyan + + + Dark cyan + Dark cyan + + + Magenta + Magenta + + + Dark magenta + Dark magenta + + + Yellow + Yellow + + + Dark yellow + Dark yellow + + + Gray + Gray + + + Dark gray + Dark gray + + + Light gray + Light gray + + + Custom + Custom + + + + Sheet + + Form + フォーム + + + &Contents + &Contents + + + + SpreadsheetGui::SheetTableView + + Insert rows + Insert rows + + + Remove rows + Remove rows + + + Insert columns + Insert columns + + + Remove columns + Remove columns + + + Properties... + Properties... + + + + Workbench + + Spreadsheet + Spreadsheet + + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_nl.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_nl.qm new file mode 100644 index 0000000000..399c2d96f3 Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_nl.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_nl.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_nl.ts new file mode 100644 index 0000000000..d7c2e59a11 --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_nl.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + Rekenblad + + + Create spreadsheet + Create spreadsheet + + + Create a new spreadsheet + Create a new spreadsheet + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + Rekenblad + + + Align bottom + Align bottom + + + Bottom-align contents of selected cells + Bottom-align contents of selected cells + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + Rekenblad + + + Align center + Align center + + + Center-align contents of selected cells + Center-align contents of selected cells + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + Rekenblad + + + Align left + Links uitlijnen + + + Left-align contents of selected cells + Left-align contents of selected cells + + + + CmdSpreadsheetAlignRight + + Spreadsheet + Rekenblad + + + Align right + Rechts uitlijnen + + + Right-align contents of selected cells + Right-align contents of selected cells + + + + CmdSpreadsheetAlignTop + + Spreadsheet + Rekenblad + + + Align top + Bovenaan uitlijnen + + + Top-align contents of selected cells + Top-align contents of selected cells + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + Rekenblad + + + Vertically center-align + Vertically center-align + + + Center-align contents vertically of selected cells + Center-align contents vertically of selected cells + + + + CmdSpreadsheetExport + + Spreadsheet + Rekenblad + + + Export spreadsheet + Export spreadsheet + + + Export spreadsheet to CSV file + Export spreadsheet to CSV file + + + + CmdSpreadsheetImport + + Spreadsheet + Rekenblad + + + Import spreadsheet + Import spreadsheet + + + Import CSV file into spreadsheet + Import CSV file into spreadsheet + + + + CmdSpreadsheetMergeCells + + Spreadsheet + Rekenblad + + + Merge cells + Merge cells + + + Merge selected cells in spreadsheet + Merge selected cells in spreadsheet + + + + CmdSpreadsheetSplitCell + + Spreadsheet + Rekenblad + + + Split cell + Split cell + + + Split previously merged cells in spreadsheet + Split previously merged cells in spreadsheet + + + + CmdSpreadsheetStyleBold + + Spreadsheet + Rekenblad + + + Bold text + Bold text + + + Set bold text in selected cells + Set bold text in selected cells + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + Rekenblad + + + Italic text + Italic text + + + Set italic text in selected cells + Set italic text in selected cells + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + Rekenblad + + + Underline text + Underline text + + + Set underline text in selected cells + Set underline text in selected cells + + + + ColorPickerPopup + + Custom + Custom + + + + PropertiesDialog + + Cell properties + Cell properties + + + &Color + &Color + + + Text + Tekst + + + Background + Background + + + &Alignment + &Alignment + + + Horizontal + Horizontaal + + + Left + Links + + + Center + Middelpunt + + + Right + Rechts + + + Vertical + Verticaal + + + Top + Boven + + + Bottom + Onder + + + &Style + &Style + + + Bold + Bold + + + Italic + Italic + + + Underline + Underline + + + &Display unit + &Display unit + + + Unit string + Unit string + + + A&lias + A&lias + + + Alias for this cell + Alias for this cell + + + + QObject + + All (*) + All (*) + + + Import file + Bestand importeren + + + Export file + Bestand exporteren + + + Cell contents + Cell contents + + + Show spreadsheet + Show spreadsheet + + + + QtColorPicker + + Black + Zwart + + + White + Wit + + + Red + Rood + + + Dark red + Donkerrood + + + Green + Groen + + + Dark green + Donkergroen + + + Blue + Blauw + + + Dark blue + Donkerblauw + + + Cyan + Cyaan + + + Dark cyan + Donkercyaan + + + Magenta + Magenta + + + Dark magenta + Donkermagenta + + + Yellow + Geel + + + Dark yellow + Donkergeel + + + Gray + Grijs + + + Dark gray + Dark gray + + + Light gray + Light gray + + + Custom + Custom + + + + Sheet + + Form + Vorm + + + &Contents + &Contents + + + + SpreadsheetGui::SheetTableView + + Insert rows + Insert rows + + + Remove rows + Remove rows + + + Insert columns + Insert columns + + + Remove columns + Remove columns + + + Properties... + Properties... + + + + Workbench + + Spreadsheet + Rekenblad + + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_no.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_no.qm new file mode 100644 index 0000000000..629d0644ad Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_no.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_no.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_no.ts new file mode 100644 index 0000000000..753cc39f51 --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_no.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + Regneark + + + Create spreadsheet + Opprett regneark + + + Create a new spreadsheet + Opprett et nytt regneark + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + Regneark + + + Align bottom + Bunnjuster + + + Bottom-align contents of selected cells + Juster celleinnhold nederst i merkede celler + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + Regneark + + + Align center + Midtstill + + + Center-align contents of selected cells + Sentrer celleinnhold i merkede celler + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + Regneark + + + Align left + Venstrejuster + + + Left-align contents of selected cells + Venstrejuster innholdet i merkede celler + + + + CmdSpreadsheetAlignRight + + Spreadsheet + Regneark + + + Align right + Høyrejuster + + + Right-align contents of selected cells + Høyrejuster innholdet i merkede celler + + + + CmdSpreadsheetAlignTop + + Spreadsheet + Regneark + + + Align top + Toppjuster + + + Top-align contents of selected cells + Toppjuster innholdet i merkede celler + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + Regneark + + + Vertically center-align + Senterjuster vertikalt + + + Center-align contents vertically of selected cells + Sentrer innholdet i merkede celler vertikalt + + + + CmdSpreadsheetExport + + Spreadsheet + Regneark + + + Export spreadsheet + Eksportere regneark + + + Export spreadsheet to CSV file + Eksporter regnearket til en komma-separert fil + + + + CmdSpreadsheetImport + + Spreadsheet + Regneark + + + Import spreadsheet + Importer regneark + + + Import CSV file into spreadsheet + Importer kommaseparert fil + + + + CmdSpreadsheetMergeCells + + Spreadsheet + Regneark + + + Merge cells + Slå sammen celler + + + Merge selected cells in spreadsheet + Slå sammen merkede celler i regnearket + + + + CmdSpreadsheetSplitCell + + Spreadsheet + Regneark + + + Split cell + Splitt celler + + + Split previously merged cells in spreadsheet + Del tidligere sammenslåtte celler i regnearket + + + + CmdSpreadsheetStyleBold + + Spreadsheet + Regneark + + + Bold text + Fet tekst + + + Set bold text in selected cells + Angi fet tekst i merkede celler + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + Regneark + + + Italic text + Kursiv tekst + + + Set italic text in selected cells + Angi kursiv tekst i merkede celler + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + Regneark + + + Underline text + Understreke tekst + + + Set underline text in selected cells + Angi understreket tekst i merkede celler + + + + ColorPickerPopup + + Custom + Egendefinert + + + + PropertiesDialog + + Cell properties + Egenskaper for celle + + + &Color + &Farge + + + Text + Tekst + + + Background + Bakgrunn + + + &Alignment + &Justering + + + Horizontal + Horizontal + + + Left + Venstre + + + Center + Center + + + Right + Høyre + + + Vertical + Vertical + + + Top + Topp + + + Bottom + Bunn + + + &Style + &Stil + + + Bold + Fet + + + Italic + Kursiv + + + Underline + Understreking + + + &Display unit + &Visningsenhet + + + Unit string + Enhetsstreng + + + A&lias + A&lias + + + Alias for this cell + Alias for denne cellen + + + + QObject + + All (*) + Alle (*) + + + Import file + Importer fil + + + Export file + Eksporter fil + + + Cell contents + Celleinnhold + + + Show spreadsheet + Vis regneark + + + + QtColorPicker + + Black + Svart + + + White + Hvit + + + Red + Rød + + + Dark red + Mørk rød + + + Green + Grønn + + + Dark green + Mørk grønn + + + Blue + Blå + + + Dark blue + Mørk blå + + + Cyan + Cyan + + + Dark cyan + Mørk cyan + + + Magenta + Magenta + + + Dark magenta + Mørk magenta + + + Yellow + Gul + + + Dark yellow + Mørk gul + + + Gray + Grå + + + Dark gray + Mørk grå + + + Light gray + Lys grå + + + Custom + Egendefinert + + + + Sheet + + Form + Skjema + + + &Contents + &Innhold + + + + SpreadsheetGui::SheetTableView + + Insert rows + Sett inn rader + + + Remove rows + Fjern rader + + + Insert columns + Sett inn kolonner + + + Remove columns + Fjern kolonner + + + Properties... + Egenskaper... + + + + Workbench + + Spreadsheet + Regneark + + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.qm new file mode 100644 index 0000000000..ab9a2aaf58 Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.ts new file mode 100644 index 0000000000..afd03c1d73 --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pl.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + Spreadsheet + + + Create spreadsheet + Create spreadsheet + + + Create a new spreadsheet + Create a new spreadsheet + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + Spreadsheet + + + Align bottom + Align bottom + + + Bottom-align contents of selected cells + Bottom-align contents of selected cells + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + Spreadsheet + + + Align center + Align center + + + Center-align contents of selected cells + Center-align contents of selected cells + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + Spreadsheet + + + Align left + Align left + + + Left-align contents of selected cells + Left-align contents of selected cells + + + + CmdSpreadsheetAlignRight + + Spreadsheet + Spreadsheet + + + Align right + Align right + + + Right-align contents of selected cells + Right-align contents of selected cells + + + + CmdSpreadsheetAlignTop + + Spreadsheet + Spreadsheet + + + Align top + Align top + + + Top-align contents of selected cells + Top-align contents of selected cells + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + Spreadsheet + + + Vertically center-align + Vertically center-align + + + Center-align contents vertically of selected cells + Center-align contents vertically of selected cells + + + + CmdSpreadsheetExport + + Spreadsheet + Spreadsheet + + + Export spreadsheet + Export spreadsheet + + + Export spreadsheet to CSV file + Export spreadsheet to CSV file + + + + CmdSpreadsheetImport + + Spreadsheet + Spreadsheet + + + Import spreadsheet + Import spreadsheet + + + Import CSV file into spreadsheet + Import CSV file into spreadsheet + + + + CmdSpreadsheetMergeCells + + Spreadsheet + Spreadsheet + + + Merge cells + Merge cells + + + Merge selected cells in spreadsheet + Merge selected cells in spreadsheet + + + + CmdSpreadsheetSplitCell + + Spreadsheet + Spreadsheet + + + Split cell + Split cell + + + Split previously merged cells in spreadsheet + Split previously merged cells in spreadsheet + + + + CmdSpreadsheetStyleBold + + Spreadsheet + Spreadsheet + + + Bold text + Bold text + + + Set bold text in selected cells + Set bold text in selected cells + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + Spreadsheet + + + Italic text + Italic text + + + Set italic text in selected cells + Set italic text in selected cells + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + Spreadsheet + + + Underline text + Underline text + + + Set underline text in selected cells + Set underline text in selected cells + + + + ColorPickerPopup + + Custom + Custom + + + + PropertiesDialog + + Cell properties + Cell properties + + + &Color + &Color + + + Text + Tekst + + + Background + Background + + + &Alignment + &Alignment + + + Horizontal + Pozioma + + + Left + Lewa + + + Center + Środek + + + Right + Prawo + + + Vertical + Pionowa + + + Top + Góra + + + Bottom + U dołu + + + &Style + &Style + + + Bold + Bold + + + Italic + Italic + + + Underline + Underline + + + &Display unit + &Display unit + + + Unit string + Unit string + + + A&lias + A&lias + + + Alias for this cell + Alias for this cell + + + + QObject + + All (*) + All (*) + + + Import file + Importuj plik + + + Export file + Eksportuj plik + + + Cell contents + Cell contents + + + Show spreadsheet + Show spreadsheet + + + + QtColorPicker + + Black + Czarny + + + White + Biały + + + Red + Red + + + Dark red + Dark red + + + Green + Green + + + Dark green + Dark green + + + Blue + Blue + + + Dark blue + Dark blue + + + Cyan + Cyan + + + Dark cyan + Dark cyan + + + Magenta + Magenta + + + Dark magenta + Dark magenta + + + Yellow + Yellow + + + Dark yellow + Dark yellow + + + Gray + Gray + + + Dark gray + Dark gray + + + Light gray + Light gray + + + Custom + Custom + + + + Sheet + + Form + Formularz + + + &Contents + &Contents + + + + SpreadsheetGui::SheetTableView + + Insert rows + Insert rows + + + Remove rows + Remove rows + + + Insert columns + Insert columns + + + Remove columns + Remove columns + + + Properties... + Properties... + + + + Workbench + + Spreadsheet + Spreadsheet + + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-BR.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-BR.qm new file mode 100644 index 0000000000..4f0abbd1e1 Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-BR.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-BR.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-BR.ts new file mode 100644 index 0000000000..e18475f950 --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-BR.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + Planilha + + + Create spreadsheet + Criar planilha + + + Create a new spreadsheet + Cria uma nova planilha + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + Planilha + + + Align bottom + Alinhar abaixo + + + Bottom-align contents of selected cells + Alinha o conteúdo das células selecionadas abaixo + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + Planilha + + + Align center + Alinhar ao centro + + + Center-align contents of selected cells + Alinha o conteúdo das células selecionadas no centro + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + Planilha + + + Align left + Alinhar à esquerda + + + Left-align contents of selected cells + Alinha o conteúdo das células selecionadas a esquerda + + + + CmdSpreadsheetAlignRight + + Spreadsheet + Planilha + + + Align right + Alinhar à direita + + + Right-align contents of selected cells + Alinha o conteúdo das células selecionadas à direita + + + + CmdSpreadsheetAlignTop + + Spreadsheet + Planilha + + + Align top + Alinhar acima + + + Top-align contents of selected cells + Alinha o conteúdo das células selecionadas acima + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + Planilha + + + Vertically center-align + Alinhar no centro verticalmente + + + Center-align contents vertically of selected cells + Alinha o conteúdo na vertical de células selecionadas ao centro verticalmente + + + + CmdSpreadsheetExport + + Spreadsheet + Planilha + + + Export spreadsheet + Exportar planilha + + + Export spreadsheet to CSV file + Exporta uma planilha para um arquivo CSV + + + + CmdSpreadsheetImport + + Spreadsheet + Planilha + + + Import spreadsheet + Importar planilha + + + Import CSV file into spreadsheet + Importa um arquivo CSV em uma planilha + + + + CmdSpreadsheetMergeCells + + Spreadsheet + Planilha + + + Merge cells + Mesclar células + + + Merge selected cells in spreadsheet + Mescla as células selecionadas na planilha + + + + CmdSpreadsheetSplitCell + + Spreadsheet + Planilha + + + Split cell + Dividir célula + + + Split previously merged cells in spreadsheet + Divide células mescladas anteriormente na planilha + + + + CmdSpreadsheetStyleBold + + Spreadsheet + Planilha + + + Bold text + Negrito + + + Set bold text in selected cells + Coloca o texto em negrito nas células selecionadas + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + Planilha + + + Italic text + Itálico + + + Set italic text in selected cells + Coloca o texto em itálico nas células selecionadas + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + Planilha + + + Underline text + Sublinhado + + + Set underline text in selected cells + Coloca o texto sublinhado nas células selecionadas + + + + ColorPickerPopup + + Custom + Personalizado + + + + PropertiesDialog + + Cell properties + Propriedades da célula + + + &Color + &Cor + + + Text + Texto + + + Background + Cor de fundo + + + &Alignment + &Alinhamento + + + Horizontal + Horizontal + + + Left + Esquerda + + + Center + Centro + + + Right + Direito + + + Vertical + Vertical + + + Top + Topo + + + Bottom + De baixo + + + &Style + &Estilo + + + Bold + Negrito + + + Italic + Itálico + + + Underline + Sublinhado + + + &Display unit + &Unidades + + + Unit string + Sufixo de unidade + + + A&lias + &Atalho + + + Alias for this cell + Atalho para esta célula + + + + QObject + + All (*) + Todos (*) + + + Import file + Importar um arquivo + + + Export file + Exportar um arquivo + + + Cell contents + Conteúdo da célula + + + Show spreadsheet + Mostrar planilha + + + + QtColorPicker + + Black + Preto + + + White + Branco + + + Red + Vermelho + + + Dark red + Vermelho escuro + + + Green + Verde + + + Dark green + Verde escuro + + + Blue + Azul + + + Dark blue + Azul escuro + + + Cyan + Ciano + + + Dark cyan + Ciano escuro + + + Magenta + Magenta + + + Dark magenta + Magenta escuro + + + Yellow + Amarelo + + + Dark yellow + Amarelo escuro + + + Gray + Cinza + + + Dark gray + Cinza escuro + + + Light gray + Cinza claro + + + Custom + Personalizado + + + + Sheet + + Form + Formulário + + + &Contents + &Conteúdo + + + + SpreadsheetGui::SheetTableView + + Insert rows + Inserir linhas + + + Remove rows + Remover linhas + + + Insert columns + Inserir colunas + + + Remove columns + Remover colunas + + + Properties... + Propriedades... + + + + Workbench + + Spreadsheet + Planilha + + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-PT.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-PT.qm new file mode 100644 index 0000000000..9932c90993 Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-PT.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-PT.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-PT.ts new file mode 100644 index 0000000000..f2e8c0665f --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-PT.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + Folha de cálculo + + + Create spreadsheet + Criar folha de cálculo + + + Create a new spreadsheet + Criar uma nova folha de cálculo + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + Folha de cálculo + + + Align bottom + Alinhamento inferior + + + Bottom-align contents of selected cells + Alinha o conteúdo das células selecionadas pelo fundo + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + Folha de cálculo + + + Align center + Alinhar ao Centro + + + Center-align contents of selected cells + Alinhar ao centro o conteúdo das células selecionadas + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + Folha de cálculo + + + Align left + Alinhar à esquerda + + + Left-align contents of selected cells + Alinhar à esquerda o conteúdo das células selecionadas + + + + CmdSpreadsheetAlignRight + + Spreadsheet + Folha de cálculo + + + Align right + Alinhar à direita + + + Right-align contents of selected cells + Alinhar à direita o conteúdo das células selecionadas + + + + CmdSpreadsheetAlignTop + + Spreadsheet + Folha de cálculo + + + Align top + Alinhamento superior + + + Top-align contents of selected cells + Alinhamento superior do conteúdo das células selecionadas + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + Folha de cálculo + + + Vertically center-align + Alinhar verticalmente ao centro + + + Center-align contents vertically of selected cells + Alinhar verticalmente ao centro o conteúdo das células selecionadas + + + + CmdSpreadsheetExport + + Spreadsheet + Folha de cálculo + + + Export spreadsheet + Exportar folha de cálculo + + + Export spreadsheet to CSV file + Exportar folha de cálculo para ficheiro CSV + + + + CmdSpreadsheetImport + + Spreadsheet + Folha de cálculo + + + Import spreadsheet + Importar Folha de Cálculo + + + Import CSV file into spreadsheet + Importar ficheiro CSV para a folha de cálculo + + + + CmdSpreadsheetMergeCells + + Spreadsheet + Folha de cálculo + + + Merge cells + Juntar células + + + Merge selected cells in spreadsheet + Juntar células selecionadas na folha de cálculo + + + + CmdSpreadsheetSplitCell + + Spreadsheet + Folha de cálculo + + + Split cell + Dividir célula + + + Split previously merged cells in spreadsheet + Dividir células juntas anteriormente na folha de cálculo + + + + CmdSpreadsheetStyleBold + + Spreadsheet + Folha de cálculo + + + Bold text + Texto em negrito + + + Set bold text in selected cells + Definir texto em negrito nas células selecionadas + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + Folha de cálculo + + + Italic text + Texto em itálico + + + Set italic text in selected cells + Definir texto em itálico nas células selecionadas + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + Folha de cálculo + + + Underline text + Sublinhar texto + + + Set underline text in selected cells + Definir texto sublinhado nas células selecionadas + + + + ColorPickerPopup + + Custom + Personalizado + + + + PropertiesDialog + + Cell properties + Propriedades da célula + + + &Color + & Cor + + + Text + Texto + + + Background + Fundo + + + &Alignment + Alinhamento + + + Horizontal + Horizontal + + + Left + Esquerda + + + Center + Centro + + + Right + Direita + + + Vertical + Vertical + + + Top + Topo + + + Bottom + De baixo + + + &Style + & Estilo + + + Bold + Negrito + + + Italic + Itálico + + + Underline + Sublinhado + + + &Display unit + Unidades de exibição + + + Unit string + Sufixo da unidade + + + A&lias + &Atalho + + + Alias for this cell + Atalho para esta célula + + + + QObject + + All (*) + Todos (*) + + + Import file + Importar ficheiro + + + Export file + Exportar ficheiro + + + Cell contents + Conteúdo da célula + + + Show spreadsheet + Mostrar folha de cálculo + + + + QtColorPicker + + Black + Preto + + + White + Branco + + + Red + Vermelho + + + Dark red + Vermelho escuro + + + Green + Verde + + + Dark green + Verde escuro + + + Blue + Azul + + + Dark blue + Dark blue + + + Cyan + Cyan + + + Dark cyan + Dark cyan + + + Magenta + Magenta + + + Dark magenta + Dark magenta + + + Yellow + Yellow + + + Dark yellow + Dark yellow + + + Gray + Gray + + + Dark gray + Dark gray + + + Light gray + Light gray + + + Custom + Personalizado + + + + Sheet + + Form + De + + + &Contents + &Contents + + + + SpreadsheetGui::SheetTableView + + Insert rows + Insert rows + + + Remove rows + Remove rows + + + Insert columns + Insert columns + + + Remove columns + Remove columns + + + Properties... + Properties... + + + + Workbench + + Spreadsheet + Folha de cálculo + + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ro.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ro.qm new file mode 100644 index 0000000000..af0779a889 Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ro.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ro.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ro.ts new file mode 100644 index 0000000000..e5f047ba6c --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ro.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + Foaie de calcul + + + Create spreadsheet + Creare foaie de calcul + + + Create a new spreadsheet + Creaţi o nouă foaie de calcul + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + Foaie de calcul + + + Align bottom + Aliniaţi partea de jos + + + Bottom-align contents of selected cells + Aliniere în jos a conţinutului celulelor selectate + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + Foaie de calcul + + + Align center + Aliniere în centru + + + Center-align contents of selected cells + Aliniere în centru a conținutului celulelor selectate + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + Foaie de calcul + + + Align left + Aliniere la stânga + + + Left-align contents of selected cells + Aliniere la stânga a conținutului celulelor selectate + + + + CmdSpreadsheetAlignRight + + Spreadsheet + Foaie de calcul + + + Align right + Aliniere la dreapta + + + Right-align contents of selected cells + Aliniere la dreapta a conținutului celulelor selectate + + + + CmdSpreadsheetAlignTop + + Spreadsheet + Foaie de calcul + + + Align top + Aliniere sus + + + Top-align contents of selected cells + Aliniere în sus a conţinutului celulelor selectate + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + Foaie de calcul + + + Vertically center-align + Aliniere verticală centrată + + + Center-align contents vertically of selected cells + Aliniere verticală centrată a conținutului celulelor selectate + + + + CmdSpreadsheetExport + + Spreadsheet + Foaie de calcul + + + Export spreadsheet + Exportă foaie de calcul + + + Export spreadsheet to CSV file + Exportă foaie de calcul ca fișier CSV + + + + CmdSpreadsheetImport + + Spreadsheet + Foaie de calcul + + + Import spreadsheet + Importă foaie de calcul + + + Import CSV file into spreadsheet + Importă fișier CSV în foaia de calcul + + + + CmdSpreadsheetMergeCells + + Spreadsheet + Foaie de calcul + + + Merge cells + Îmbinare celule + + + Merge selected cells in spreadsheet + Îmbinarea celulelor selectate din foaia de calcul + + + + CmdSpreadsheetSplitCell + + Spreadsheet + Foaie de calcul + + + Split cell + Scindare celule + + + Split previously merged cells in spreadsheet + Scindaţi celulele îmbinate anterior în foaia de calcul + + + + CmdSpreadsheetStyleBold + + Spreadsheet + Foaie de calcul + + + Bold text + Text aldin + + + Set bold text in selected cells + Setează text aldin în celulele selectate + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + Foaie de calcul + + + Italic text + Text cursiv + + + Set italic text in selected cells + Setează text cursiv în celulele selectate + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + Foaie de calcul + + + Underline text + Sublinierea textului + + + Set underline text in selected cells + Setează text subliniat în celulele selectate + + + + ColorPickerPopup + + Custom + Personalizat + + + + PropertiesDialog + + Cell properties + Proprietăţile celulei + + + &Color + & Culoare + + + Text + Text + + + Background + Fundal + + + &Alignment + Aliniere + + + Horizontal + Horizontal + + + Left + Stanga + + + Center + Centru + + + Right + Dreapta + + + Vertical + Vertical + + + Top + Partea de sus + + + Bottom + Partea de jos + + + &Style + & Stil + + + Bold + Aldin + + + Italic + Cursiv + + + Underline + Subliniat + + + &Display unit + Unitate de afișare + + + Unit string + Unitate de şir + + + A&lias + Alias + + + Alias for this cell + Alias pentru această celulă + + + + QObject + + All (*) + Tot (*) + + + Import file + Importă fişier + + + Export file + Exportă fişier + + + Cell contents + Conținutul celulelor + + + Show spreadsheet + Arată foaie de calcul + + + + QtColorPicker + + Black + Negru + + + White + Alb + + + Red + Roșu + + + Dark red + Roșu închis + + + Green + Verde + + + Dark green + Verde închis + + + Blue + Albastru + + + Dark blue + Albastru închis + + + Cyan + Turcoaz + + + Dark cyan + Turcoaz închis + + + Magenta + Magenta + + + Dark magenta + magenta închis + + + Yellow + Galben + + + Dark yellow + Galben închis + + + Gray + Gri + + + Dark gray + Gri închis + + + Light gray + Gri deschis + + + Custom + Personalizat + + + + Sheet + + Form + Formular + + + &Contents + &Conţinutul + + + + SpreadsheetGui::SheetTableView + + Insert rows + Inserare rânduri + + + Remove rows + Elimina rânduri + + + Insert columns + Inserare coloane + + + Remove columns + Eliminați coloane + + + Properties... + Proprietăți... + + + + Workbench + + Spreadsheet + Foaie de calcul + + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.qm new file mode 100644 index 0000000000..8b76ba30b7 Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.ts new file mode 100644 index 0000000000..d9b4ed6ecb --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ru.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + Электронная таблица + + + Create spreadsheet + Создать таблицу + + + Create a new spreadsheet + Создать новую электронную таблицу + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + Электронная таблица + + + Align bottom + Align bottom + + + Bottom-align contents of selected cells + Bottom-align contents of selected cells + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + Электронная таблица + + + Align center + Align center + + + Center-align contents of selected cells + Center-align contents of selected cells + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + Электронная таблица + + + Align left + Align left + + + Left-align contents of selected cells + Left-align contents of selected cells + + + + CmdSpreadsheetAlignRight + + Spreadsheet + Электронная таблица + + + Align right + Align right + + + Right-align contents of selected cells + Right-align contents of selected cells + + + + CmdSpreadsheetAlignTop + + Spreadsheet + Электронная таблица + + + Align top + Align top + + + Top-align contents of selected cells + Top-align contents of selected cells + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + Электронная таблица + + + Vertically center-align + Vertically center-align + + + Center-align contents vertically of selected cells + Center-align contents vertically of selected cells + + + + CmdSpreadsheetExport + + Spreadsheet + Электронная таблица + + + Export spreadsheet + Export spreadsheet + + + Export spreadsheet to CSV file + Export spreadsheet to CSV file + + + + CmdSpreadsheetImport + + Spreadsheet + Электронная таблица + + + Import spreadsheet + Import spreadsheet + + + Import CSV file into spreadsheet + Import CSV file into spreadsheet + + + + CmdSpreadsheetMergeCells + + Spreadsheet + Электронная таблица + + + Merge cells + Merge cells + + + Merge selected cells in spreadsheet + Merge selected cells in spreadsheet + + + + CmdSpreadsheetSplitCell + + Spreadsheet + Электронная таблица + + + Split cell + Split cell + + + Split previously merged cells in spreadsheet + Split previously merged cells in spreadsheet + + + + CmdSpreadsheetStyleBold + + Spreadsheet + Электронная таблица + + + Bold text + Bold text + + + Set bold text in selected cells + Set bold text in selected cells + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + Электронная таблица + + + Italic text + Italic text + + + Set italic text in selected cells + Set italic text in selected cells + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + Электронная таблица + + + Underline text + Underline text + + + Set underline text in selected cells + Set underline text in selected cells + + + + ColorPickerPopup + + Custom + Custom + + + + PropertiesDialog + + Cell properties + Cell properties + + + &Color + &Color + + + Text + Текст + + + Background + Background + + + &Alignment + &Alignment + + + Horizontal + По горизонтали + + + Left + Слева + + + Center + Центр + + + Right + Вправо + + + Vertical + По вертикали + + + Top + Вверх + + + Bottom + Дно + + + &Style + &Style + + + Bold + Bold + + + Italic + Italic + + + Underline + Underline + + + &Display unit + &Display unit + + + Unit string + Unit string + + + A&lias + A&lias + + + Alias for this cell + Alias for this cell + + + + QObject + + All (*) + All (*) + + + Import file + Импорт файла + + + Export file + Экспорт файла + + + Cell contents + Cell contents + + + Show spreadsheet + Show spreadsheet + + + + QtColorPicker + + Black + Чёрный + + + White + Белый + + + Red + Red + + + Dark red + Dark red + + + Green + Green + + + Dark green + Dark green + + + Blue + Blue + + + Dark blue + Dark blue + + + Cyan + Cyan + + + Dark cyan + Dark cyan + + + Magenta + Magenta + + + Dark magenta + Dark magenta + + + Yellow + Yellow + + + Dark yellow + Dark yellow + + + Gray + Gray + + + Dark gray + Dark gray + + + Light gray + Light gray + + + Custom + Custom + + + + Sheet + + Form + Форма + + + &Contents + &Contents + + + + SpreadsheetGui::SheetTableView + + Insert rows + Insert rows + + + Remove rows + Remove rows + + + Insert columns + Insert columns + + + Remove columns + Remove columns + + + Properties... + Properties... + + + + Workbench + + Spreadsheet + Электронная таблица + + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sr.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sr.qm new file mode 100644 index 0000000000..d9a2e3e65d Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sr.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sr.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sr.ts new file mode 100644 index 0000000000..5a9a2a1a11 --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sr.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + Табела + + + Create spreadsheet + Направи табелу + + + Create a new spreadsheet + Направи нову табелу + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + Табела + + + Align bottom + Поравнај доле + + + Bottom-align contents of selected cells + Доње поравнање cадржаја одабраних ћелија + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + Табела + + + Align center + Поравнај центар + + + Center-align contents of selected cells + Централно поравнање cадржаја одабраних ћелија + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + Табела + + + Align left + Поравнај лево + + + Left-align contents of selected cells + Лево поравнање cадржаја одабраних ћелија + + + + CmdSpreadsheetAlignRight + + Spreadsheet + Табела + + + Align right + Поравнај деcно + + + Right-align contents of selected cells + Деcно поравнање cадржаја одабраних ћелија + + + + CmdSpreadsheetAlignTop + + Spreadsheet + Табела + + + Align top + Поравнај горе + + + Top-align contents of selected cells + Горње поравнање cадржаја одабраних ћелија + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + Табела + + + Vertically center-align + Вертикално централно поравнање + + + Center-align contents vertically of selected cells + Централно-вертикално поравнање cадржаја одабраних ћелија + + + + CmdSpreadsheetExport + + Spreadsheet + Табела + + + Export spreadsheet + Извези табелу + + + Export spreadsheet to CSV file + Извези табелу у CSV датотеку + + + + CmdSpreadsheetImport + + Spreadsheet + Табела + + + Import spreadsheet + Увези табелу + + + Import CSV file into spreadsheet + Увези CSV датотеку у табелу + + + + CmdSpreadsheetMergeCells + + Spreadsheet + Табела + + + Merge cells + Cпоји ћелије + + + Merge selected cells in spreadsheet + Cпоји одабране ћелије у табели + + + + CmdSpreadsheetSplitCell + + Spreadsheet + Табела + + + Split cell + Подели ћелију + + + Split previously merged cells in spreadsheet + Подели предходно cпојене ћелије у табели + + + + CmdSpreadsheetStyleBold + + Spreadsheet + Табела + + + Bold text + Bold text + + + Set bold text in selected cells + Set bold text in selected cells + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + Табела + + + Italic text + Italic text + + + Set italic text in selected cells + Set italic text in selected cells + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + Табела + + + Underline text + Подвучен текcт + + + Set underline text in selected cells + Set underline text in selected cells + + + + ColorPickerPopup + + Custom + Прилагођено + + + + PropertiesDialog + + Cell properties + Cвојcтва ћелије + + + &Color + &Боја + + + Text + Текст + + + Background + Позадина + + + &Alignment + &Поравнавање + + + Horizontal + Horizontal + + + Left + Лево + + + Center + Центар + + + Right + Деcно + + + Vertical + Vertical + + + Top + Горе + + + Bottom + Доле + + + &Style + &Cтил + + + Bold + Bold + + + Italic + Italic + + + Underline + Подвучено + + + &Display unit + &Прикажи јединицу + + + Unit string + Unit string + + + A&lias + A&lias + + + Alias for this cell + Alias for this cell + + + + QObject + + All (*) + Cве (*) + + + Import file + Увези датотеку + + + Export file + Извези датотеку + + + Cell contents + Cадржај ћелије + + + Show spreadsheet + Прикажи табелу + + + + QtColorPicker + + Black + Црно + + + White + Бело + + + Red + Црвена + + + Dark red + Тамно црвена + + + Green + Зелена + + + Dark green + Тамно зелена + + + Blue + Плава + + + Dark blue + Тамно плава + + + Cyan + Cyan + + + Dark cyan + Dark cyan + + + Magenta + Magenta + + + Dark magenta + Dark magenta + + + Yellow + Жута + + + Dark yellow + Тамно жута + + + Gray + Cива + + + Dark gray + Тамно cива + + + Light gray + Cветло cива + + + Custom + Прилагођено + + + + Sheet + + Form + Form + + + &Contents + &Cадржаји + + + + SpreadsheetGui::SheetTableView + + Insert rows + Insert rows + + + Remove rows + Remove rows + + + Insert columns + Insert columns + + + Remove columns + Remove columns + + + Properties... + Cвојcтва... + + + + Workbench + + Spreadsheet + Табела + + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sv-SE.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sv-SE.qm new file mode 100644 index 0000000000..6a12199796 Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sv-SE.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sv-SE.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sv-SE.ts new file mode 100644 index 0000000000..a91a8cbe03 --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sv-SE.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + Spreadsheet + + + Create spreadsheet + Create spreadsheet + + + Create a new spreadsheet + Create a new spreadsheet + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + Spreadsheet + + + Align bottom + Align bottom + + + Bottom-align contents of selected cells + Bottom-align contents of selected cells + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + Spreadsheet + + + Align center + Align center + + + Center-align contents of selected cells + Center-align contents of selected cells + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + Spreadsheet + + + Align left + Align left + + + Left-align contents of selected cells + Left-align contents of selected cells + + + + CmdSpreadsheetAlignRight + + Spreadsheet + Spreadsheet + + + Align right + Align right + + + Right-align contents of selected cells + Right-align contents of selected cells + + + + CmdSpreadsheetAlignTop + + Spreadsheet + Spreadsheet + + + Align top + Align top + + + Top-align contents of selected cells + Top-align contents of selected cells + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + Spreadsheet + + + Vertically center-align + Vertically center-align + + + Center-align contents vertically of selected cells + Center-align contents vertically of selected cells + + + + CmdSpreadsheetExport + + Spreadsheet + Spreadsheet + + + Export spreadsheet + Export spreadsheet + + + Export spreadsheet to CSV file + Export spreadsheet to CSV file + + + + CmdSpreadsheetImport + + Spreadsheet + Spreadsheet + + + Import spreadsheet + Import spreadsheet + + + Import CSV file into spreadsheet + Import CSV file into spreadsheet + + + + CmdSpreadsheetMergeCells + + Spreadsheet + Spreadsheet + + + Merge cells + Merge cells + + + Merge selected cells in spreadsheet + Merge selected cells in spreadsheet + + + + CmdSpreadsheetSplitCell + + Spreadsheet + Spreadsheet + + + Split cell + Split cell + + + Split previously merged cells in spreadsheet + Split previously merged cells in spreadsheet + + + + CmdSpreadsheetStyleBold + + Spreadsheet + Spreadsheet + + + Bold text + Bold text + + + Set bold text in selected cells + Set bold text in selected cells + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + Spreadsheet + + + Italic text + Italic text + + + Set italic text in selected cells + Set italic text in selected cells + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + Spreadsheet + + + Underline text + Underline text + + + Set underline text in selected cells + Set underline text in selected cells + + + + ColorPickerPopup + + Custom + Custom + + + + PropertiesDialog + + Cell properties + Cell properties + + + &Color + &Color + + + Text + Text + + + Background + Background + + + &Alignment + &Alignment + + + Horizontal + Horisontell + + + Left + Vänster + + + Center + Mitten + + + Right + Höger + + + Vertical + Lodrät + + + Top + Topp + + + Bottom + Botten + + + &Style + &Style + + + Bold + Bold + + + Italic + Italic + + + Underline + Underline + + + &Display unit + &Display unit + + + Unit string + Unit string + + + A&lias + A&lias + + + Alias for this cell + Alias for this cell + + + + QObject + + All (*) + All (*) + + + Import file + importera fil + + + Export file + Exportera fil + + + Cell contents + Cell contents + + + Show spreadsheet + Show spreadsheet + + + + QtColorPicker + + Black + Svart + + + White + Vit + + + Red + Red + + + Dark red + Dark red + + + Green + Green + + + Dark green + Dark green + + + Blue + Blue + + + Dark blue + Dark blue + + + Cyan + Cyan + + + Dark cyan + Dark cyan + + + Magenta + Magenta + + + Dark magenta + Dark magenta + + + Yellow + Yellow + + + Dark yellow + Dark yellow + + + Gray + Gray + + + Dark gray + Dark gray + + + Light gray + Light gray + + + Custom + Custom + + + + Sheet + + Form + Form + + + &Contents + &Contents + + + + SpreadsheetGui::SheetTableView + + Insert rows + Insert rows + + + Remove rows + Remove rows + + + Insert columns + Insert columns + + + Remove columns + Remove columns + + + Properties... + Properties... + + + + Workbench + + Spreadsheet + Spreadsheet + + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_uk.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_uk.qm new file mode 100644 index 0000000000..cc8a270d18 Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_uk.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_uk.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_uk.ts new file mode 100644 index 0000000000..6ab6173e83 --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_uk.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + Spreadsheet + + + Create spreadsheet + Create spreadsheet + + + Create a new spreadsheet + Create a new spreadsheet + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + Spreadsheet + + + Align bottom + Align bottom + + + Bottom-align contents of selected cells + Bottom-align contents of selected cells + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + Spreadsheet + + + Align center + Align center + + + Center-align contents of selected cells + Center-align contents of selected cells + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + Spreadsheet + + + Align left + Align left + + + Left-align contents of selected cells + Left-align contents of selected cells + + + + CmdSpreadsheetAlignRight + + Spreadsheet + Spreadsheet + + + Align right + Align right + + + Right-align contents of selected cells + Right-align contents of selected cells + + + + CmdSpreadsheetAlignTop + + Spreadsheet + Spreadsheet + + + Align top + Align top + + + Top-align contents of selected cells + Top-align contents of selected cells + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + Spreadsheet + + + Vertically center-align + Vertically center-align + + + Center-align contents vertically of selected cells + Center-align contents vertically of selected cells + + + + CmdSpreadsheetExport + + Spreadsheet + Spreadsheet + + + Export spreadsheet + Export spreadsheet + + + Export spreadsheet to CSV file + Export spreadsheet to CSV file + + + + CmdSpreadsheetImport + + Spreadsheet + Spreadsheet + + + Import spreadsheet + Import spreadsheet + + + Import CSV file into spreadsheet + Import CSV file into spreadsheet + + + + CmdSpreadsheetMergeCells + + Spreadsheet + Spreadsheet + + + Merge cells + Merge cells + + + Merge selected cells in spreadsheet + Merge selected cells in spreadsheet + + + + CmdSpreadsheetSplitCell + + Spreadsheet + Spreadsheet + + + Split cell + Split cell + + + Split previously merged cells in spreadsheet + Split previously merged cells in spreadsheet + + + + CmdSpreadsheetStyleBold + + Spreadsheet + Spreadsheet + + + Bold text + Bold text + + + Set bold text in selected cells + Set bold text in selected cells + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + Spreadsheet + + + Italic text + Italic text + + + Set italic text in selected cells + Set italic text in selected cells + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + Spreadsheet + + + Underline text + Underline text + + + Set underline text in selected cells + Set underline text in selected cells + + + + ColorPickerPopup + + Custom + Custom + + + + PropertiesDialog + + Cell properties + Cell properties + + + &Color + &Color + + + Text + Текст + + + Background + Background + + + &Alignment + &Alignment + + + Horizontal + По горизонталі + + + Left + Ліворуч + + + Center + Центр + + + Right + Направо + + + Vertical + По вертикалі + + + Top + Згори + + + Bottom + Внизу + + + &Style + &Style + + + Bold + Bold + + + Italic + Italic + + + Underline + Underline + + + &Display unit + &Display unit + + + Unit string + Unit string + + + A&lias + A&lias + + + Alias for this cell + Alias for this cell + + + + QObject + + All (*) + All (*) + + + Import file + Імпорт файлу + + + Export file + Експорт файлу + + + Cell contents + Cell contents + + + Show spreadsheet + Show spreadsheet + + + + QtColorPicker + + Black + Чорний + + + White + Білий + + + Red + Red + + + Dark red + Dark red + + + Green + Green + + + Dark green + Dark green + + + Blue + Blue + + + Dark blue + Dark blue + + + Cyan + Cyan + + + Dark cyan + Dark cyan + + + Magenta + Magenta + + + Dark magenta + Dark magenta + + + Yellow + Yellow + + + Dark yellow + Dark yellow + + + Gray + Gray + + + Dark gray + Dark gray + + + Light gray + Light gray + + + Custom + Custom + + + + Sheet + + Form + Форма + + + &Contents + &Contents + + + + SpreadsheetGui::SheetTableView + + Insert rows + Insert rows + + + Remove rows + Remove rows + + + Insert columns + Insert columns + + + Remove columns + Remove columns + + + Properties... + Properties... + + + + Workbench + + Spreadsheet + Spreadsheet + + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-CN.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-CN.qm new file mode 100644 index 0000000000..e8f221525e Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-CN.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-CN.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-CN.ts new file mode 100644 index 0000000000..f33fbc0e5e --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-CN.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + Spreadsheet + + + Create spreadsheet + Create spreadsheet + + + Create a new spreadsheet + Create a new spreadsheet + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + Spreadsheet + + + Align bottom + Align bottom + + + Bottom-align contents of selected cells + Bottom-align contents of selected cells + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + Spreadsheet + + + Align center + Align center + + + Center-align contents of selected cells + Center-align contents of selected cells + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + Spreadsheet + + + Align left + Align left + + + Left-align contents of selected cells + Left-align contents of selected cells + + + + CmdSpreadsheetAlignRight + + Spreadsheet + Spreadsheet + + + Align right + Align right + + + Right-align contents of selected cells + Right-align contents of selected cells + + + + CmdSpreadsheetAlignTop + + Spreadsheet + Spreadsheet + + + Align top + Align top + + + Top-align contents of selected cells + Top-align contents of selected cells + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + Spreadsheet + + + Vertically center-align + Vertically center-align + + + Center-align contents vertically of selected cells + Center-align contents vertically of selected cells + + + + CmdSpreadsheetExport + + Spreadsheet + Spreadsheet + + + Export spreadsheet + Export spreadsheet + + + Export spreadsheet to CSV file + Export spreadsheet to CSV file + + + + CmdSpreadsheetImport + + Spreadsheet + Spreadsheet + + + Import spreadsheet + Import spreadsheet + + + Import CSV file into spreadsheet + Import CSV file into spreadsheet + + + + CmdSpreadsheetMergeCells + + Spreadsheet + Spreadsheet + + + Merge cells + Merge cells + + + Merge selected cells in spreadsheet + Merge selected cells in spreadsheet + + + + CmdSpreadsheetSplitCell + + Spreadsheet + Spreadsheet + + + Split cell + Split cell + + + Split previously merged cells in spreadsheet + Split previously merged cells in spreadsheet + + + + CmdSpreadsheetStyleBold + + Spreadsheet + Spreadsheet + + + Bold text + Bold text + + + Set bold text in selected cells + Set bold text in selected cells + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + Spreadsheet + + + Italic text + Italic text + + + Set italic text in selected cells + Set italic text in selected cells + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + Spreadsheet + + + Underline text + Underline text + + + Set underline text in selected cells + Set underline text in selected cells + + + + ColorPickerPopup + + Custom + Custom + + + + PropertiesDialog + + Cell properties + Cell properties + + + &Color + &Color + + + Text + 文本 + + + Background + Background + + + &Alignment + &Alignment + + + Horizontal + 水平 + + + Left + 左视 + + + Center + Center + + + Right + 右 + + + Vertical + 垂直 + + + Top + 顶视 + + + Bottom + 底视 + + + &Style + &Style + + + Bold + Bold + + + Italic + Italic + + + Underline + Underline + + + &Display unit + &Display unit + + + Unit string + Unit string + + + A&lias + A&lias + + + Alias for this cell + Alias for this cell + + + + QObject + + All (*) + All (*) + + + Import file + 导入文件 + + + Export file + 导出文件 + + + Cell contents + Cell contents + + + Show spreadsheet + Show spreadsheet + + + + QtColorPicker + + Black + 黑色 + + + White + 白色 + + + Red + Red + + + Dark red + Dark red + + + Green + Green + + + Dark green + Dark green + + + Blue + Blue + + + Dark blue + Dark blue + + + Cyan + Cyan + + + Dark cyan + Dark cyan + + + Magenta + Magenta + + + Dark magenta + Dark magenta + + + Yellow + Yellow + + + Dark yellow + Dark yellow + + + Gray + Gray + + + Dark gray + Dark gray + + + Light gray + Light gray + + + Custom + Custom + + + + Sheet + + Form + 窗体 + + + &Contents + &Contents + + + + SpreadsheetGui::SheetTableView + + Insert rows + Insert rows + + + Remove rows + Remove rows + + + Insert columns + Insert columns + + + Remove columns + Remove columns + + + Properties... + Properties... + + + + Workbench + + Spreadsheet + Spreadsheet + + + diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-TW.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-TW.qm new file mode 100644 index 0000000000..df60ffda8b Binary files /dev/null and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-TW.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-TW.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-TW.ts new file mode 100644 index 0000000000..ec18b5301a --- /dev/null +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_zh-TW.ts @@ -0,0 +1,443 @@ + + + + + CmdCreateSpreadsheet + + Spreadsheet + 試算表 + + + Create spreadsheet + 建立試算表 + + + Create a new spreadsheet + 建立一個新的試算表 + + + + CmdSpreadsheetAlignBottom + + Spreadsheet + 試算表 + + + Align bottom + 向下對齊 + + + Bottom-align contents of selected cells + 所選儲存格之內容向下對齊 + + + + CmdSpreadsheetAlignCenter + + Spreadsheet + 試算表 + + + Align center + 水平中央對齊 + + + Center-align contents of selected cells + 所選單元之儲存格水平中央對齊 + + + + CmdSpreadsheetAlignLeft + + Spreadsheet + 試算表 + + + Align left + 向左對齊 + + + Left-align contents of selected cells + 所選儲存格之內容向左對齊 + + + + CmdSpreadsheetAlignRight + + Spreadsheet + 試算表 + + + Align right + 向右對齊 + + + Right-align contents of selected cells + 所選儲存格之內容以向右對齊 + + + + CmdSpreadsheetAlignTop + + Spreadsheet + 試算表 + + + Align top + 向上對齊 + + + Top-align contents of selected cells + 所選儲存格之內容向上對齊 + + + + CmdSpreadsheetAlignVCenter + + Spreadsheet + 試算表 + + + Vertically center-align + 垂直中央對齊 + + + Center-align contents vertically of selected cells + 所選儲存格之內容垂直中央對齊 + + + + CmdSpreadsheetExport + + Spreadsheet + 試算表 + + + Export spreadsheet + 匯出試算表 + + + Export spreadsheet to CSV file + 匯出試算表為CSV格式 + + + + CmdSpreadsheetImport + + Spreadsheet + 試算表 + + + Import spreadsheet + 匯入試算表 + + + Import CSV file into spreadsheet + 將CSV檔匯入至試算表 + + + + CmdSpreadsheetMergeCells + + Spreadsheet + 試算表 + + + Merge cells + 合併儲存格 + + + Merge selected cells in spreadsheet + 於試算表中合併所選儲存格 + + + + CmdSpreadsheetSplitCell + + Spreadsheet + 試算表 + + + Split cell + 分割儲存格 + + + Split previously merged cells in spreadsheet + 於試算表中將先前合併的儲存格分割 + + + + CmdSpreadsheetStyleBold + + Spreadsheet + 試算表 + + + Bold text + 粗體 + + + Set bold text in selected cells + 所選儲存格設定為粗體 + + + + CmdSpreadsheetStyleItalic + + Spreadsheet + 試算表 + + + Italic text + 斜體 + + + Set italic text in selected cells + 所選儲存格設定為斜體 + + + + CmdSpreadsheetStyleUnderline + + Spreadsheet + 試算表 + + + Underline text + 文字加上底線 + + + Set underline text in selected cells + 所選儲存格設定為文字加上底線 + + + + ColorPickerPopup + + Custom + 自訂 + + + + PropertiesDialog + + Cell properties + 儲存格屬性 + + + &Color + 色彩(&C) + + + Text + 文字 + + + Background + 背景 + + + &Alignment + 對齊(&A) + + + Horizontal + Horizontal + + + Left + 左 + + + Center + 中心 + + + Right + 右 + + + Vertical + Vertical + + + Top + 上 + + + Bottom + 底部 + + + &Style + 型式(&S) + + + Bold + 粗體 + + + Italic + 斜體 + + + Underline + 底線 + + + &Display unit + 顯示單位(&D) + + + Unit string + 單位字串 + + + A&lias + 別名 + + + Alias for this cell + 儲存格之別名 + + + + QObject + + All (*) + 全部(*) + + + Import file + 匯入檔案 + + + Export file + 匯出檔案 + + + Cell contents + 儲存格內容 + + + Show spreadsheet + 顯示試算表 + + + + QtColorPicker + + Black + 黑色 + + + White + 白色 + + + Red + 紅色 + + + Dark red + 暗紅色 + + + Green + 綠色 + + + Dark green + 深綠色 + + + Blue + 藍色 + + + Dark blue + 深藍色 + + + Cyan + 青色 + + + Dark cyan + 深青色 + + + Magenta + 洋紅色 + + + Dark magenta + 深洋红 + + + Yellow + 黃色 + + + Dark yellow + 深黃色 + + + Gray + 灰色 + + + Dark gray + 深灰色 + + + Light gray + 淺灰色 + + + Custom + 自訂 + + + + Sheet + + Form + 格式 + + + &Contents + 內容(&C) + + + + SpreadsheetGui::SheetTableView + + Insert rows + 插入列 + + + Remove rows + 刪除列 + + + Insert columns + 插入欄 + + + Remove columns + 刪除欄 + + + Properties... + 屬性... + + + + Workbench + + Spreadsheet + 試算表 + + + diff --git a/src/Mod/Start/Gui/Resources/Start.qrc b/src/Mod/Start/Gui/Resources/Start.qrc index 080595e7ac..6c0ebce419 100644 --- a/src/Mod/Start/Gui/Resources/Start.qrc +++ b/src/Mod/Start/Gui/Resources/Start.qrc @@ -23,5 +23,6 @@ translations/StartPage_zh-CN.qm translations/StartPage_ro.qm translations/StartPage_pt-PT.qm + translations/StartPage_sr.qm diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_af.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_af.qm index 3e3d058b0a..ffd4654eea 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_af.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_af.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_af.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_af.ts index 2b1bd951fa..bc2e7767de 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_af.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_af.ts @@ -108,11 +108,6 @@ The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. Die <b>Argitektoniese ontwerp</b> werkbank is spesiaal ontwerp om te werk met argitektoniese elemente soos mure en vensters. Begin deur 2D-vorms te teken en gebruik hulle as gidse om argitektoniese voorwerpe te bou. - - - Architectual Design - Argitektoniese Ontwerp - Working with Meshes @@ -228,11 +223,6 @@ The tutorials section on the FreeCAD website Die tutoriaalafdeling van die FreeCAD webwerf - - - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - Die gedeelte van die FreeCAD werberf toegewy aan python kodering, met voorbeelde, verklarings, en API-bevele. - A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community @@ -273,11 +263,6 @@ http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - - - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Tutorials @@ -288,5 +273,30 @@ http://www.freecadweb.org/wiki/index.php?title=Power_users_hub http://www.freecadweb.org/wiki/index.php?title=Power_users_hub + + + Architectural Design + Architectural Design + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches + + + + Your version of FreeCAD is up to date. + Your version of FreeCAD is up to date. + + + + There is a new release of FreeCAD available. + There is a new release of FreeCAD available. + diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_cs.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_cs.qm index 6dd1824452..f743c7d94a 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_cs.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_cs.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_cs.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_cs.ts index 44c90aca19..25aa29b61e 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_cs.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_cs.ts @@ -108,11 +108,6 @@ The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. <b>Návrh staveb</b> pracovní plocha speciálně pro práci s architektonickými prvky, jako jsou například stěny nebo okna. Začíná kreslením 2D tvarů a používá je jako skicu k vybudování architektonických objektů. - - - Architectual Design - Návrh Stavby - Working with Meshes @@ -228,11 +223,6 @@ The tutorials section on the FreeCAD website Kapitola cvičení na stránkách FreeCAD - - - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - Kapitola věnovaná skriptování v Pythonu na stánkách FreeCAD, s příklady, vysvětlivkami, a příkazy API. - A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community @@ -273,11 +263,6 @@ http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - - - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Tutorials @@ -288,5 +273,30 @@ http://www.freecadweb.org/wiki/index.php?title=Power_users_hub http://www.freecadweb.org/wiki/index.php?title=Power_users_hub + + + Architectural Design + Architektonický návrh + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches + + + + Your version of FreeCAD is up to date. + Your version of FreeCAD is up to date. + + + + There is a new release of FreeCAD available. + There is a new release of FreeCAD available. + diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_de.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_de.qm index 1a0709111e..d10dadd73f 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_de.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_de.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_de.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_de.ts index 0339953e6b..25737ce065 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_de.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_de.ts @@ -1,282 +1,302 @@ - + StartPage - - - FreeCAD Start Center - FreeCAD Startcenter - - - - Start a new project - Neues Projekt beginnen - - - - Recent Files - Letzte Dokumente - - - - Tutorials - Tutorien - - - - FreeCAD Homepage - FreeCAD Homepage - - - - Example projects - Beispiel-Projekte - - - - Schenkel STEP file - Schenkel STEP-Datei - - - - Load a PartDesign example - Lade ein Fertigungsdesign-Beispiel - - - - Load a Drawing extraction - Lade eine Zeichnungsableitung - - - - Load a Robot simulation example - Lade ein Robotersimulations-Beispiel - - - - Projects from the Web - Projekte aus dem Web - - - - Schenkel STEP - Schenkel STEP - - - - Complex Part - Komplexes Teil - - - - Close this window after opening or creating a file - Schließe dieses Fenster wenn eine Datei geöffnet oder neu angelegt wurde - - - - Don't show me this window again next time - Dieses Fenster beim nächsten Mal nicht mehr anzeigen - - - - Designing parts - Entwerfen von Teilen - - - - The <b>Part Design</b> workbench is designed to create complex pieces based on constrained 2D sketches. Use it to draw 2D shapes, constrain some of their elements and extrude them to form 3D pieces. - Die <b>Fertigungs-Design</b> Werkbank dient zum Erstellen komplexer Teile auf der Grundlage von eingeschränkten 2D-Skizzen. Verwenden Sie es um 2D Formen zu zeichnen, einige ihrer Elemente einschränken und durch Extrudieren 3D Stücke zu bilden. - - - - Example workflow - Workflow-Beispiel - - - - Part Design - Teile-Konstruktion - - - - Designing architectural elements - Entwerfen von architektonischen Elemente - - - - The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. - Die <b>Architektonische Design</b> Workbench ist speziell für die Arbeit mit Architekturelementen wie Wänden oder Fenstern geeignet. Starte durch die Zeichnung von 2D Umrissen, und verwende diese als Grundlage, um architektonische Objekte zu erstellen. - - - - Architectual Design - Architektonische Design - - Working with Meshes - Arbeiten mit Netzen + FreeCAD Start Center + FreeCAD Startcenter - The <b>Mesh Workbench</b> is used to work with Mesh objects. Meshes are simpler 3D objects than Part objects, but they are often easier to import and export to/from other applications. - Die <b>Gitter-Werkbank</b> wird benutzt um mit Gitter-Objekten zu arbeiten. Gitter sind einfachere 3D-Teile als Volumenobjekte, aber sie sind oft einfacher von/zu anderen Programmen zu importieren und exportieren. + Start a new project + Neues Projekt beginnen - FreeCAD offers you several tools to convert between Mesh and Part objects. - FreeCAD bietet Ihnen verschiedene Werkzeuge zum Konvertieren zwischen Gitter und Volumen-Objekten. + Recent Files + Zuletzt verwendete Dokumente - - Work with Meshes - Arbeiten mit Netzen - - - - The complete workbench - Die vollständige Werkbank - - - - FreeCAD Complete workbench - FreeCAD Komplett-Arbeitsbereich + + Tutorials + Tutorien - file size: - Datei Größe: + FreeCAD Homepage + FreeCAD Homepage - creation time: - erstellungs Zeit: + Example projects + Beispiel-Projekte - last modified: - zuletzt geändert: - - - - populated with some of the most commonly used tools. - gefüllt mit einigen der am häufigsten verwendeten Werkzeuge. - - - - Latest videos - Neueste Videos/Screencasts - - - - Latest news - Neuigkeiten - - - - On the web - Im Web - - - - This is the FreeCAD Homepage. Here you will be able to find a lot of information about FreeCAD, including tutorials, examples and user documentation. - Dies ist die FreeCAD Homepage. Hier wirst Du eine Menge Informationen über FreeCAD, einschließlich Tutorials, Beispiele und Benutzerdokumentation finden können. + Schenkel STEP file + Schenkel STEP-Datei - location: - Ort: + Load a PartDesign example + Lade ein Beispiel für Teile-Konstruktion - User manual - Benutzeranleitung + Load a Drawing extraction + Lade eine Zeichnungsableitung - http://sourceforge.net/apps/mediawiki/free-cad/index.php?title=Online_Help_Toc - http://sourceforge.net/apps/mediawiki/free-cad/index.php?title=Online_Help_Toc + Load a Robot simulation example + Lade ein Beispiel für eine Robotersimulations + + + + Projects from the Web + Projekte aus dem Internet - Python resources - Python-Quellen + Schenkel STEP + Schenkel STEP - File not found - Datei nicht gefunden + Complex Part + Komplexes Teil - from <a href=http://twitter.com/FreeCADNews>@FreeCADNews</a> - von <a href=http://twitter.com/FreeCADNews> @ FreeCADNews</a> + Close this window after opening or creating a file + Schließe dieses Fenster, nachdem eine Datei geöffnet oder neu erzeugt wurde - The FreeCAD-tutorial blog - Der FreeCAD-Tutorial-Blog + Don't show me this window again next time + Dieses Fenster beim nächsten Mal nicht mehr anzeigen - from <a href=http://www.youtube.com/user/FreeCADNews?feature=mhee>FreeCADNews channel</a> - vom <a href=http://www.youtube.com/user/FreeCADNews?feature=mhee> FreeCADNews-Kanal</a> + Designing parts + Entwerfen von Teilen - This is the official user manual of FreeCAD, built, maintained and translated by the FreeCAD community. - Dies ist das offizielle Benutzerhandbuch von FreeCAD, geschrieben, betreut und übersetzt durch die FreeCAD-Gemeinschaft. + The <b>Part Design</b> workbench is designed to create complex pieces based on constrained 2D sketches. Use it to draw 2D shapes, constrain some of their elements and extrude them to form 3D pieces. + Der <b>Teile-Konstruktions</b>-Arbeitsbereich dient zum Erstellen komplexer Teile auf der Grundlage von zweidimensionalen Skizzen. Verwenden Sie sie, um Skizzen zu zeichnen, zu vermaßen, und durch Extrudieren dreidimensionale Körper zu erzeugen. - The tutorials section on the FreeCAD website - Die Tutorial-Rubrik auf der FreeCAD-Webseite + Example workflow + Workflow-Beispiel - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - Die Rubrik der FreeCAD-Seite, die Python mit Beispielen, Erklärungen und API-Kommandos gewidmet ist. + Part Design + Teile-Konstruktion - A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community - Ein Blog um FreeCAD zu lernen. Von und für Mitglieder der FreeCAD-Gemeinschaft + Designing architectural elements + Entwerfen von architektonischen Elementen - Getting started - Erste Schritte - - - - The FreeCAD interface is divided in workbenches, which are sets of tools suited for a specific task. You can start with one of the workbenches in this list, or with the complete workbench, which presents you with some of the most used tools gathered from other workbenches. Click to read more about workbenches on the FreeCAD website. - Das FreeCAD Interface ist in Arbeitsbereiche gegliedert, die Werkzeuge für bestimmte Aufgaben enthalten. Man kann entweder einen Arbeitsbereich aus der Liste auswählen oder den Complete-Arbeitsbereich starten, der einige der meist genutzten Werkzeuge aller Arbeitsbereiche enthält. Hier klicken um mehr über Arbeitsbereiche auf der FreeCAD Website zu erfahren. + The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. + Der <b>Architektur-Design</b>-Arbeitsbereich ist speziell für die Arbeit mit Architekturelementen wie Wänden oder Fenstern geeignet. Beginne mit dem Skizzieren von zweidimensionalen Umrissen, und verwende diese als Grundlage, um architektonische Objekte zu erstellen. - http://sourceforge.net/apps/mediawiki/free-cad/index.php?title=Workbench_Concept - http://sourceforge.net/apps/mediawiki/free-cad/index.php?title=Workbench_Concept + Working with Meshes + Arbeiten mit Netzen - Ship Design - Ship Design + The <b>Mesh Workbench</b> is used to work with Mesh objects. Meshes are simpler 3D objects than Part objects, but they are often easier to import and export to/from other applications. + Der <b>Netz</b>-Arbeitsbereich wird benutzt, um mit vernetzten Körpern zu arbeiten. Netze sind einfachere 3D-Objekte als Volumenkörper, aber sie sind oft leichter zu anderen Programmen zu exportieren und von ihnen zu importieren. - Designing and calculating ships - Entwerfen und Berechnen von Schiffen + FreeCAD offers you several tools to convert between Mesh and Part objects. + FreeCAD bietet Ihnen verschiedene Werkzeuge zum Konvertieren zwischen Netzen und Volumenkörpern. - The <b>Ship Design</b> module offers several tools to help ship designers to view, model and calculate profiles and other specific properties of ship hulls. - Das <b>Ship Design</b> module bieter mehrere Werkzeuge zum anzeigen, modellieren und berechnen von Profilen und anderen Eigenschaften von Schiffsrümpfen. + Work with Meshes + Arbeiten mit Netzen + The complete workbench + Der vollständige Arbeitsbereich + + + + FreeCAD Complete workbench + FreeCAD Komplett-Arbeitsbereich + + + + file size: + Dateigröße: + + + + creation time: + Erstellungszeit: + + + + last modified: + zuletzt geändert: + + + + populated with some of the most commonly used tools. + mit einigen der am häufigsten verwendeten Werkzeuge. + + + + Latest videos + Neueste Videos/Screencasts + + + + Latest news + Neuigkeiten + + + + On the web + Im Internet + + + + This is the FreeCAD Homepage. Here you will be able to find a lot of information about FreeCAD, including tutorials, examples and user documentation. + Dies ist die FreeCAD-Homepage. Hier findest Du eine Menge Informationen über FreeCAD, zum Beispiel Tutorien, Beispiele und Dokumentation. + + + + location: + Ort: + + + + User manual + Benutzerhandbuch + + + + Python resources + Python-Ressourcen + + + + File not found + Datei nicht gefunden + + + + from <a href=http://twitter.com/FreeCADNews>@FreeCADNews</a> + von <a href=http://twitter.com/FreeCADNews> @ FreeCADNews</a> + + + + The FreeCAD-tutorial blog + Der FreeCAD-Tutorien-Blog + + + + from <a href=http://www.youtube.com/user/FreeCADNews?feature=mhee>FreeCADNews channel</a> + vom <a href=http://www.youtube.com/user/FreeCADNews?feature=mhee> FreeCADNews-Kanal</a> + + + + This is the official user manual of FreeCAD, built, maintained and translated by the FreeCAD community. + Dies ist das offizielle Benutzerhandbuch von FreeCAD, geschrieben, betreut und übersetzt durch die FreeCAD-Gemeinschaft. + + + + The tutorials section on the FreeCAD website + Die Tutorien-Rubrik auf der FreeCAD-Webseite + + + + A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community + Ein Blog um FreeCAD zu lernen. Von und für Mitglieder der FreeCAD-Gemeinschaft + + + + Getting started + Erste Schritte + + + + The FreeCAD interface is divided in workbenches, which are sets of tools suited for a specific task. You can start with one of the workbenches in this list, or with the complete workbench, which presents you with some of the most used tools gathered from other workbenches. Click to read more about workbenches on the FreeCAD website. + FreeCAD ist in Arbeitsbereiche gegliedert, die jeweils Werkzeuge für bestimmte Aufgaben enthalten. Man kann entweder einen Arbeitsbereich aus der Liste auswählen oder den Komplett-Arbeitsbereich starten, der einige der am häufisten genutzten Werkzeuge aus allen Arbeitsbereichen enthält. Hier klicken, um mehr über Arbeitsbereiche auf der FreeCAD-Internetseite zu erfahren. + + + + Ship Design + Entwurf von Schiffen + + + + Designing and calculating ships + Entwerfen und Berechnen von Schiffen + + + + The <b>Ship Design</b> module offers several tools to help ship designers to view, model and calculate profiles and other specific properties of ship hulls. + Das <b>Ship Design</b> Modul bietet verschiedene Werkzeuge zum Anzeigen, Modellieren und Berechnen von Profilen und anderen Eigenschaften von Schiffsrümpfen. + + + Load an Architectural example model - Lade ein Architektur Beispiel-Modell + Lade ein Architektur Beispiel-Modell + + + + http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc + http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc/de + + + + http://www.freecadweb.org/wiki/index.php?title=Tutorials + http://www.freecadweb.org/wiki/index.php?title=Tutorials + + + + http://www.freecadweb.org/wiki/index.php?title=Power_users_hub + http://www.freecadweb.org/wiki/index.php?title=Power_users_hub/de + + + + Architectural Design + Architekturgestaltung + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + Der Abschnitt der FreeCAD-Website zu Python scripting, mit Beispielen, Erklärungen und API Befehlen. + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches/de + + + + Your version of FreeCAD is up to date. + Ihre Version von FreeCAD ist auf dem neuesten Stand. + + + + There is a new release of FreeCAD available. + Es gibt eine neue Version von FreeCAD. diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_es-ES.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_es-ES.qm index 89c96e50d5..da973808ab 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_es-ES.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_es-ES.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_es-ES.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_es-ES.ts index 9acfecd946..d7855ab645 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_es-ES.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_es-ES.ts @@ -108,11 +108,6 @@ The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. El banco de trabajo <b>Diseño arquitectónico</b> está especialmente diseñado para trabajar con elementos arquitectónicos tales como paredes o ventanas. Comience dibujando formas 2D y úselos como guías para construir objetos arquitectónicos. - - - Architectual Design - Diseño arquitectónico - Working with Meshes @@ -228,11 +223,6 @@ The tutorials section on the FreeCAD website La sección de tutoriales en el sitio Web de FreeCAD - - - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - La sección de la página Web de FreeCAd dedicada a scripts Python, con ejemplos, explicaciones y comandos de API. - A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community @@ -273,11 +263,6 @@ http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc/es - - - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Workbenches/es - http://www.freecadweb.org/wiki/index.php?title=Tutorials @@ -288,5 +273,30 @@ http://www.freecadweb.org/wiki/index.php?title=Power_users_hub http://www.freecadweb.org/wiki/index.php?title=Power_users_hub/es + + + Architectural Design + Diseño de Arquitecturas + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + La sección de la página web de FreeCAD dedicada a python scripting, con ejemplos, explicaciones y comandos API. + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches/es + + + + Your version of FreeCAD is up to date. + Tu versión de FreeCAD está actualizada. + + + + There is a new release of FreeCAD available. + Hay una nueva versión de FreeCAD disponible. + diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_fi.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_fi.qm index c18bf58364..f392d96fe1 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_fi.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_fi.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_fi.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_fi.ts index e4657a1596..cab1b07398 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_fi.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_fi.ts @@ -6,7 +6,7 @@ FreeCAD Start Center - FreeCAD Aloituskeskus + FreeCAD aloituskeskus @@ -108,11 +108,6 @@ The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. <b>Arkkitehtuuri</b> Työpöytä on suunniteltu arkkitehtonisten elementtien, kuten seinien tai ikkunoiden käsittelemistä varten. Käynnistää 2D piirroksena ja käyttää niitä apuviivoina rakentaessa arkkitehtonisia objekteja. - - - Architectual Design - Arkkitehtuurinen suunnittelu - Working with Meshes @@ -228,11 +223,6 @@ The tutorials section on the FreeCAD website Tutoriaalit osio FreeCAD-sivustolla - - - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - FreeCAD Web-sivuston osan hakutoimintoihin on sisällytetty dto python skriptikieltä komentosarjojen esimerkeissä, selvitykssä ja API-komennoissa. - A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community @@ -273,11 +263,6 @@ http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - - - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Tutorials @@ -288,5 +273,30 @@ http://www.freecadweb.org/wiki/index.php?title=Power_users_hub http://www.freecadweb.org/wiki/index.php?title=Power_users_hub + + + Architectural Design + Arkkitehtisuunnittelu + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + FreeCAD verkkosivujen osio on omistettu python skripteille, mukana esimerkkejä, selityksiä ja API-komentoja. + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches + + + + Your version of FreeCAD is up to date. + Sinun FreeCAD versio on ajan tasalla. + + + + There is a new release of FreeCAD available. + FreeCAD:n uusi versio on saatavilla. + diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_fr.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_fr.qm index d86d2b22c9..d67ecce889 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_fr.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_fr.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_fr.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_fr.ts index ea185c3308..cf14eb33aa 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_fr.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_fr.ts @@ -108,11 +108,6 @@ The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. L'atelier de <b>Conception architecturale</b> est spécialement conçu pour travailler avec des éléments architecturaux tels que des murs ou des fenêtres. Commencez par dessiner des formes 2D, et utilisez-les comme guides pour construire des objets architecturaux. - - - Architectual Design - Conception architecturale - Working with Meshes @@ -228,11 +223,6 @@ The tutorials section on the FreeCAD website La section des tutoriels sur le site de FreeCAD - - - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - La section du site Web de FreeCAD dédiée au script Python, avec des exemples, des explications, et les commandes de l'API. - A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community @@ -273,11 +263,6 @@ http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc/fr - - - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Workbenches/fr - http://www.freecadweb.org/wiki/index.php?title=Tutorials @@ -288,5 +273,30 @@ http://www.freecadweb.org/wiki/index.php?title=Power_users_hub http://www.freecadweb.org/wiki/index.php?title=Power_users_hub/fr + + + Architectural Design + Conception architecturale + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + La section du site dédiée au scripting python, avec des exemples, explications et les commandes API. + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches/fr + + + + Your version of FreeCAD is up to date. + Votre version de FreeCAD est à jour. + + + + There is a new release of FreeCAD available. + Il y a une nouvelle version de FreeCAD. + diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_hr.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_hr.qm index a9072401ff..732e985cf1 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_hr.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_hr.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_hr.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_hr.ts index f6b227ffc8..5ce911dead 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_hr.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_hr.ts @@ -108,11 +108,6 @@ The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. Radno okruženje za <b>Arhitektonski dizajn</b> posebno je dizajnirano za rad s arhitektonskim elementima kao što su zidovi ili prozori. Započnite crtanje 2D oblika, te ih koristiti kao vodiči za izgradnju arhitektonskih objekata. - - - Architectual Design - Arhitektonski dizajn - Working with Meshes @@ -228,11 +223,6 @@ The tutorials section on the FreeCAD website Tutoriali na FreeCAD web stranici - - - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - Dio FreeCAD internetske stranice posvećen Python skriptama, s primjerima, objašnjenjima, i API naredbama. - A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community @@ -273,11 +263,6 @@ http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - - - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Tutorials @@ -288,5 +273,30 @@ http://www.freecadweb.org/wiki/index.php?title=Power_users_hub http://www.freecadweb.org/wiki/index.php?title=Power_users_hub + + + Architectural Design + Architectural Design + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches + + + + Your version of FreeCAD is up to date. + Your version of FreeCAD is up to date. + + + + There is a new release of FreeCAD available. + There is a new release of FreeCAD available. + diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_hu.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_hu.qm index 279b9bbaf0..46f46fc9e2 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_hu.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_hu.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_hu.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_hu.ts index 93ade2d34f..f2e8bad9cb 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_hu.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_hu.ts @@ -108,11 +108,6 @@ The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. Az <b>építészeti tervezés</b> munkafelület kifejezetten építészeti elemek szerkesztésére szolgál, mint például falak vagy ablakok. Kezdjük 2D formák rajzolásával, és használja őket építészeti tárgyakat építési irányvonalára. - - - Architectual Design - Építőelemek tervezése - Working with Meshes @@ -228,11 +223,6 @@ The tutorials section on the FreeCAD website Az oktató rész a FreeCAD honlapon - - - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - A FreeCAd webhely egy része a python szkripteknek van kialakítva, példákkal, magyarázatokkal és API-parancsokkal. - A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community @@ -273,11 +263,6 @@ http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - - - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Tutorials @@ -288,5 +273,30 @@ http://www.freecadweb.org/wiki/index.php?title=Power_users_hub http://www.freecadweb.org/wiki/index.php?title=Power_users_hub + + + Architectural Design + Építészeti tervezés + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches + + + + Your version of FreeCAD is up to date. + Your version of FreeCAD is up to date. + + + + There is a new release of FreeCAD available. + There is a new release of FreeCAD available. + diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_it.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_it.qm index 54f6c31a9c..96ecbea9de 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_it.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_it.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_it.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_it.ts index e80674d6f5..d74a44aad6 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_it.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_it.ts @@ -108,11 +108,6 @@ The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. L'ambiente <b>Progettazione Architettonica</b> è appositamente progettato per lavorare con elementi architettonici come pareti o finestre. Inizi disegnando forme 2D e usale come guide per costruire oggetti architettonici. - - - Architectual Design - Progettazione architettonica - Working with Meshes @@ -228,11 +223,6 @@ The tutorials section on the FreeCAD website La sezione tutorial sul sito FreeCAD - - - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - La sezione del sito FreeCAD dedicata agli script python, con esempi, spiegazioni e comandi API. - A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community @@ -271,22 +261,42 @@ http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - - - - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept + http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc/it http://www.freecadweb.org/wiki/index.php?title=Tutorials - http://www.freecadweb.org/wiki/index.php?title=Tutorials + http://www.freecadweb.org/wiki/index.php?title=Tutorials/it http://www.freecadweb.org/wiki/index.php?title=Power_users_hub - http://www.freecadweb.org/wiki/index.php?title=Power_users_hub + http://www.freecadweb.org/wiki/index.php?title=Power_users_hub/it + + + + Architectural Design + Progettazione architettonica + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + La sezione del sito dedicata agli script python, con esempi, spiegazioni e comandi API di FreeCAD. + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches/it + + + + Your version of FreeCAD is up to date. + La tua versione di FreeCAD è aggiornata. + + + + There is a new release of FreeCAD available. + È disponibile una nuova release di FreeCAD . diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ja.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_ja.qm index d42777313b..5c327307d2 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_ja.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_ja.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ja.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_ja.ts index c64b877f8a..b8873a9ca2 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_ja.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_ja.ts @@ -109,11 +109,6 @@ The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. <b>建築設計</b>ワークベンチは、特別に壁や窓などの建築要素を扱うために設計されています。 初めに2Dの図形を作図しておき、建築オブジェクトを構築するためのガイドに用いることもできます。 - - - Architectual Design - 建築設計 - Working with Meshes @@ -229,11 +224,6 @@ The tutorials section on the FreeCAD website FreeCADホームページのチュートリアルセクション - - - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - Pythonスクリプトのためのセクションです。Pythonのサンプル，解説，APIコマンドについて書かれています。 - A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community @@ -272,12 +262,7 @@ http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - - - - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc/ja @@ -289,5 +274,30 @@ http://www.freecadweb.org/wiki/index.php?title=Power_users_hub http://www.freecadweb.org/wiki/index.php?title=Power_users_hub + + + Architectural Design + 建築デザイン + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches + + + + Your version of FreeCAD is up to date. + FreeCAD のバージョンは最新です。 + + + + There is a new release of FreeCAD available. + FreeCAD の新しいリリースが利用できます。 + diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_nl.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_nl.qm index a54fb2a8dd..3f7655704d 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_nl.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_nl.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_nl.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_nl.ts index d5cfa12086..16d6d16516 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_nl.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_nl.ts @@ -108,11 +108,6 @@ The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. de </b>bouwkundig ontwerp</b> werkbank is speciaal ontworpen voor het werken met bouwkundige elementen zoals muren of ramen. Begin met het tekenen van 2D vormen, en gebruik ze als leidraad om bouwkundige objecten te ontwerpen. - - - Architectual Design - Bouwkundig ontwerp - Working with Meshes @@ -151,7 +146,7 @@ creation time: - creatietijd: + Aanmaakdatum: @@ -166,7 +161,7 @@ Latest videos - Laatste video's + Recentste Video's @@ -228,11 +223,6 @@ The tutorials section on the FreeCAD website De tutorials sectie van de FreeCAD website - - - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - De sectie van de FreeCAD website gewijd aan Python scripten, met voorbeelden, uitleg en API-kommando's. - A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community @@ -273,11 +263,6 @@ http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - - - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Tutorials @@ -288,5 +273,30 @@ http://www.freecadweb.org/wiki/index.php?title=Power_users_hub http://www.freecadweb.org/wiki/index.php?title=Power_users_hub + + + Architectural Design + Architectural Design + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches + + + + Your version of FreeCAD is up to date. + Your version of FreeCAD is up to date. + + + + There is a new release of FreeCAD available. + There is a new release of FreeCAD available. + diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_no.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_no.qm index 431fe144fa..00b8c1367a 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_no.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_no.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_no.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_no.ts index e95fab9c87..a8244c26ea 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_no.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_no.ts @@ -108,11 +108,6 @@ The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. <b>Arkitektonisk utforming</b>-workbench er spesialdesignet for å arbeide med arkitektoniske elementer, for eksempel vegger eller Vinduer. Start med å tegne 2D-former, og bruke dem som støttelinjer til å bygge arkitektoniske objekter. - - - Architectual Design - Architectual Design - Working with Meshes @@ -228,11 +223,6 @@ The tutorials section on the FreeCAD website Opplæringsdelen av FreeCAD nettsiden - - - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community @@ -273,11 +263,6 @@ http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - - - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Tutorials @@ -288,5 +273,30 @@ http://www.freecadweb.org/wiki/index.php?title=Power_users_hub http://www.freecadweb.org/wiki/index.php?title=Power_users_hub + + + Architectural Design + Arkitektonisk design + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches + + + + Your version of FreeCAD is up to date. + Your version of FreeCAD is up to date. + + + + There is a new release of FreeCAD available. + There is a new release of FreeCAD available. + diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_pl.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_pl.qm index 7cfc3394e4..5d25b51e33 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_pl.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_pl.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_pl.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_pl.ts index 165839cbdd..7157c1f6f3 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_pl.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_pl.ts @@ -16,7 +16,7 @@ Recent Files - Niedawno używane pliki + Ostatnio używane pliki @@ -108,11 +108,6 @@ The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. Moduł <b>Projektowanie Architektoniczne</b> jest specjalnie przeznaczony do pracy z elementami architektonicznymi, takimi jak ściany lub okna. Rysowanie zaczyna się od kształtów 2D i używa się ich jako linii pomocniczych do konstruowania obiektów architektonicznych. - - - Architectual Design - Projektowanie Architektoniczne - Working with Meshes @@ -228,11 +223,6 @@ The tutorials section on the FreeCAD website Sekcja samouczków na stronie FreeCAD - - - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - Dział witryny internetowej FreeCAD-a poświęcony skryptom Pythona, z przykładami, wyjaśnieniami i poleceniami interfejsu API. - A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community @@ -273,11 +263,6 @@ http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - - - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Tutorials @@ -288,5 +273,30 @@ http://www.freecadweb.org/wiki/index.php?title=Power_users_hub http://www.freecadweb.org/wiki/index.php?title=Power_users_hub + + + Architectural Design + Projekt architektoniczny + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches + + + + Your version of FreeCAD is up to date. + Twoja wersja FreeCAD jest aktualna. + + + + There is a new release of FreeCAD available. + Nowe wydanie FreeCAD jest dostępne. + diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_pt-BR.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_pt-BR.qm index 2b1f2b6ca6..1671d4b408 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_pt-BR.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_pt-BR.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_pt-BR.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_pt-BR.ts index 3ba0ba411f..6df729861e 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_pt-BR.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_pt-BR.ts @@ -108,11 +108,6 @@ The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. A bancada de <b>Projeto Arquitetônico</b> é especialmente projetada para trabalhar com elementos arquitetônicos, tais como paredes ou janelas. Comece por desenhar formas em 2D, e use-las como guias para construir objetos arquitetônicos. - - - Architectual Design - Design arquitectónico - Working with Meshes @@ -228,11 +223,6 @@ The tutorials section on the FreeCAD website A seção de tutoriais no site do FreeCAD - - - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - A seção do site do FreeCAD dedicada ao script python, com exemplos, explicações e comandos da API. - A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community @@ -271,12 +261,7 @@ http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - - - - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept + http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc/pt-br @@ -286,7 +271,32 @@ http://www.freecadweb.org/wiki/index.php?title=Power_users_hub - http://www.freecadweb.org/wiki/index.php?title=Power_users_hub + http://www.freecadweb.org/wiki/index.php?title=Power_users_hub/pt-br + + + + Architectural Design + Projeto Arquitetônico + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + A seção do site do FreeCAD dedicada à linguagem python, com exemplos, explicações e API. + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches/pt-br + + + + Your version of FreeCAD is up to date. + A sua versão do FreeCAD está atualizada. + + + + There is a new release of FreeCAD available. + Há uma nova versão do FreeCAD disponível. diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_pt-PT.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_pt-PT.qm index 269131192e..b310fa348c 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_pt-PT.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_pt-PT.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_pt-PT.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_pt-PT.ts index a2008477ef..1f677fb5b4 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_pt-PT.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_pt-PT.ts @@ -108,20 +108,15 @@ The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. A área de trabalho <b> Desenho Arquitetural </b> está programado especialmente, para trabalhar com elementos arquiteturais, tais como, paredes e janelas. Comece por desenhar formas em 2D, e use-as como guias para criar objetos arquiteturais. - - - Architectual Design - Desenho Arquitetural - Working with Meshes - Working with Meshes + Trabalhando com Malhas The <b>Mesh Workbench</b> is used to work with Mesh objects. Meshes are simpler 3D objects than Part objects, but they are often easier to import and export to/from other applications. - The <b>Mesh Workbench</b> is used to work with Mesh objects. Meshes are simpler 3D objects than Part objects, but they are often easier to import and export to/from other applications. + A <b>Mesa de trabalho Malha</b> é usada para trabalhar com objetos Malha. Malhas são objetos 3D mais simples do que os objetos Peça, mas muitas vezes são mais fáceis de importar e exportar de/para outros aplicativos. @@ -131,7 +126,7 @@ Work with Meshes - Work with Meshes + Trabalhar com Malhas @@ -228,11 +223,6 @@ The tutorials section on the FreeCAD website A secção dos tutoriais no site da Web do FreeCAD - - - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - A secção do site da Web do FreeCAd, dedicada ao "python scripting", com exemplos, explicações e, comandos API. - A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community @@ -266,18 +256,13 @@ Load an Architectural example model - Carregar um modelo de exemplo Arquitetural + Carregar um modelo de exemplo de arquitectura http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - - - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Tutorials @@ -288,5 +273,30 @@ http://www.freecadweb.org/wiki/index.php?title=Power_users_hub http://www.freecadweb.org/wiki/index.php?title=Power_users_hub + + + Architectural Design + Projeto arquitetónico + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + A seção do site da Web do FreeCAd, dedicada ao "python scripting", com exemplos, explicações e, comandos API. + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches + + + + Your version of FreeCAD is up to date. + A sua versão do FreeCAD está atualizada. + + + + There is a new release of FreeCAD available. + Há uma nova versão do FreeCAD disponível. + diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ro.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_ro.qm index 2057649f21..989e415d1c 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_ro.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_ro.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ro.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_ro.ts index a1a7897994..4d8364b2bd 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_ro.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_ro.ts @@ -108,11 +108,6 @@ The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. Bancul de lucru <b>Design arhitectural</b> este special conceput pentru a lucra cu elemente arhitecturale, cum ar fi pereţi sau ferestre. Se poate utiliza pentru a desena forme 2D care pot fi folosite apoi ca şi ghidaje pentru a construi obiecte arhitecturale. - - - Architectual Design - Design arhitectural - Working with Meshes @@ -228,11 +223,6 @@ The tutorials section on the FreeCAD website Secţiunea de tutoriale pe site-ul FreeCAD - - - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - Secţiunea site-ului FreeCAD dedicată pentru scripting Python, cu exemple, explicaţii şi comenzi API. - A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community @@ -273,11 +263,6 @@ http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - - - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Tutorials @@ -288,5 +273,30 @@ http://www.freecadweb.org/wiki/index.php?title=Power_users_hub http://www.freecadweb.org/wiki/index.php?title=Power_users_hub + + + Architectural Design + Design arhitectural + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + Secţiunea site-ului FreeCAD dedicată pentru scripting Python, cu exemple, explicaţii şi comenzi API. + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches + + + + Your version of FreeCAD is up to date. + Versiunea dumneavoastră a FreeCAD este actualizată la zi. + + + + There is a new release of FreeCAD available. + Există o nouă versiune de FreeCAD disponibilă. + diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ru.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_ru.qm index eec50f6389..9be4fa2eda 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_ru.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_ru.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ru.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_ru.ts index ab664301a7..102372e351 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_ru.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_ru.ts @@ -21,7 +21,7 @@ Tutorials - Учебники + Уроки @@ -106,12 +106,7 @@ The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. - Рабочая среда <b>Архитектурный дизайн</b> разработана специально для работы с архитектурными элементами типа окон или стен. Начните с построения 2D фигур и используйте их как основу для создания объектов архитектуры. - - - - Architectual Design - Архитектурный дизайн + Рабочая среда <b>Архитектурное проектирование</b> разработана специально для работы с архитектурными элементами типа окон или стен. Начните с построения 2D-фигур и используйте их как основу для создания архитектурных объектов. @@ -131,7 +126,7 @@ Work with Meshes - Работа с сетями + Работа с сетками @@ -228,11 +223,6 @@ The tutorials section on the FreeCAD website Раздел обучения на веб-сайте FreeCAD - - - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - Раздел веб-сайта FreeCad посвящённый, созданию скриптов на python, с примерами, объясненими и командами API. - A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community @@ -271,12 +261,7 @@ http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - - - - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept + http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc/ru @@ -286,7 +271,32 @@ http://www.freecadweb.org/wiki/index.php?title=Power_users_hub - http://www.freecadweb.org/wiki/index.php?title=Power_users_hub + http://www.freecadweb.org/wiki/index.php?title=Power_users_hub/ru + + + + Architectural Design + Архитектурное проектирование + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + Раздел сайта FreeCAD, посвящённый созданию сценариев на Python, с примерами, объяснениями и командами API. + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches/ru + + + + Your version of FreeCAD is up to date. + Установлена самая новая версия FreeCAD. + + + + There is a new release of FreeCAD available. + Доступна для скачивания более новая версия FreeCAD. diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_sr.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_sr.qm new file mode 100644 index 0000000000..a1db8fffbe Binary files /dev/null and b/src/Mod/Start/Gui/Resources/translations/StartPage_sr.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_sr.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_sr.ts new file mode 100644 index 0000000000..e249136b44 --- /dev/null +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_sr.ts @@ -0,0 +1,302 @@ + + + + + StartPage + + + FreeCAD Start Center + FreeCAD Старт Центар + + + + Start a new project + Започни нови пројекат + + + + Recent Files + Недавне Датотеке + + + + Tutorials + Туторијали + + + + FreeCAD Homepage + FreeCAD Почетна страница + + + + Example projects + Примери пројеката + + + + Schenkel STEP file + Schenkel STEP датотека + + + + Load a PartDesign example + Учитај ДизајнДелова пример + + + + Load a Drawing extraction + Учитај екcтракцију Цртежа + + + + Load a Robot simulation example + Учитај пример cимулације Робота + + + + Projects from the Web + Пројекти са Мреже + + + + Schenkel STEP + Шенкел STEP + + + + Complex Part + Комплекcан Део + + + + Close this window after opening or creating a file + Затвори овај прозор након отварања,или прављења датотеке + + + + Don't show me this window again next time + Не приказуј овај прозор поново,cледећи пут + + + + Designing parts + Пројектовање делова + + + + The <b>Part Design</b> workbench is designed to create complex pieces based on constrained 2D sketches. Use it to draw 2D shapes, constrain some of their elements and extrude them to form 3D pieces. + Радни сто <b>ПројектовањеДелова</b>cлужи за израду cложених тела који cе темеље на 2D cкицама cа ограничењима.Кориcти за цртање 2D облика,ограничавање неких његових елемената и његово извлачење у 3D тело. + + + + Example workflow + Пример процеcа рада + + + + Part Design + Дизајн Делова + + + + Designing architectural elements + Дизајнирање архитектонских елемената + + + + The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. + <b>Архитектонcко Пројектовање</b>радно окружење је cпецијално дизајнирано за рад cа архитектонcким елементима, као што cу зидови или прозори. Започни cа цртањем 2D облика и кориcти их као водче за градњу архитектонcких објеката. + + + + Working with Meshes + Рад cа Мрежама + + + + The <b>Mesh Workbench</b> is used to work with Mesh objects. Meshes are simpler 3D objects than Part objects, but they are often easier to import and export to/from other applications. + <b>Мрежа Радни сто</b>се користи за рад са Мрежа-објектима.Мреже су једноставнији 3D објекти од тела,али су често лакши за увоз и извоз у/из других апликација. + + + + FreeCAD offers you several tools to convert between Mesh and Part objects. + FreeCAD вам нуди неколико алата за претварање између Мреже и чврстог тела. + + + + Work with Meshes + Ради cа Мрежама + + + + The complete workbench + Комплетно радно окружење + + + + FreeCAD Complete workbench + FreeCAD Комплетно радно окружење + + + + file size: + Величина датотеке: + + + + creation time: + време креирања: + + + + last modified: + поcледње измењено: + + + + populated with some of the most commonly used tools. + Попуњено cа неким од најчешће коришћених алата. + + + + Latest videos + Најновији видео записи + + + + Latest news + Најновије вести + + + + On the web + На мрежи + + + + This is the FreeCAD Homepage. Here you will be able to find a lot of information about FreeCAD, including tutorials, examples and user documentation. + Ово је FreeCAD почетна страница.Овде ћете пронаћи доста информација о FreeCAD-у,укључујући туторијале,примере и корисничку документацију. + + + + location: + локација: + + + + User manual + Упутство за кориснике + + + + Python resources + Python реcурcи + + + + File not found + Датотека није нађена + + + + from <a href=http://twitter.com/FreeCADNews>@FreeCADNews</a> + из <a href=http://twitter.com/FreeCADNews> <a href=http://twitter.com/FreeCADNews>@FreeCADNews</a> + + + + The FreeCAD-tutorial blog + FreeCAD-туторијал блог + + + + from <a href=http://www.youtube.com/user/FreeCADNews?feature=mhee>FreeCADNews channel</a> + из <a href=http://www.youtube.com/user/FreeCADNews?feature=mhee>FreeCADNews канал</a> + + + + This is the official user manual of FreeCAD, built, maintained and translated by the FreeCAD community. + Ово је званично корисничко упутство FreeCAD-а,направљено,одржавано и преведено од стране FreeCAD заједнице. + + + + The tutorials section on the FreeCAD website + Туторијали на FreeCAD веб-страници + + + + A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community + Блог посвећен учењу FreeCAD-а,одржаван од стране чланова FreeCAD заједнице + + + + Getting started + Како почети + + + + The FreeCAD interface is divided in workbenches, which are sets of tools suited for a specific task. You can start with one of the workbenches in this list, or with the complete workbench, which presents you with some of the most used tools gathered from other workbenches. Click to read more about workbenches on the FreeCAD website. + FreeCAD интерфејс је подељен на радне столове,који су сетови алата погодни за конкретан задатак.Можете почети са једним од радних столова са листе,или са комплетним радним столом,који ће вам понудити најчешће коришћене алате из свих радних столова.Кликните да прочитате више о радним столовима на FreeCAD веб-сајту. + + + + Ship Design + Брод Дизајн + + + + Designing and calculating ships + Дизајнирање и прорачуни бродова + + + + The <b>Ship Design</b> module offers several tools to help ship designers to view, model and calculate profiles and other specific properties of ship hulls. + <b>Пројектовање Брода</b>модул нуди неколико алата који ће помоћи пројектантима бродова око прегледа,моделирања,прорачунавања профила и других специфичних особина бродских трупова. + + + + Load an Architectural example model + Учитај пример Архитектонcког модела + + + + http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc + http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc + + + + http://www.freecadweb.org/wiki/index.php?title=Tutorials + http://www.freecadweb.org/wiki/index.php?title=Tutorials + + + + http://www.freecadweb.org/wiki/index.php?title=Power_users_hub + http://www.freecadweb.org/wiki/index.php?title=Power_users_hub + + + + Architectural Design + Архитектонcко Пројектовање + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + Део FreeCAD веб-сајта посвећен python скриптама,са примерима,објашњењима и API командама. + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches + + + + Your version of FreeCAD is up to date. + Ваша верзија FreeCAD-а је ажурирана. + + + + There is a new release of FreeCAD available. + Доcтупно је ново издање FreeCAD-а. + + + diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_sv-SE.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_sv-SE.qm index d776501064..34c9b453a5 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_sv-SE.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_sv-SE.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_sv-SE.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_sv-SE.ts index 4d7d2ab32d..74f08a8131 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_sv-SE.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_sv-SE.ts @@ -108,11 +108,6 @@ The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. <b>ArkitekturDesign</b> arbetsbänken är speciellt utformad för att arbeta med arkitektoniska element såsom väggar eller fönster. Börja med att rita 2D-former, och använd dem som guider för att bygga arkitektoniska objekt. - - - Architectual Design - Arkitektur Design - Working with Meshes @@ -141,7 +136,7 @@ FreeCAD Complete workbench - FreeCAD Complete workbench + FreeCAD Komplett arbetsbänk @@ -228,11 +223,6 @@ The tutorials section on the FreeCAD website Handledningsavsnittet på FreeCADs webbplats - - - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - Sektionen i FreeCAD-webbplatsen som ägnas åt pythonskript, med exempel, förklaringar och API-kommandon. - A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community @@ -246,22 +236,22 @@ The FreeCAD interface is divided in workbenches, which are sets of tools suited for a specific task. You can start with one of the workbenches in this list, or with the complete workbench, which presents you with some of the most used tools gathered from other workbenches. Click to read more about workbenches on the FreeCAD website. - The FreeCAD interface is divided in workbenches, which are sets of tools suited for a specific task. You can start with one of the workbenches in this list, or with the complete workbench, which presents you with some of the most used tools gathered from other workbenches. Click to read more about workbenches on the FreeCAD website. + FreeCADs gränssnitt är uppdelat i arbetsbänkar, vilka är uppsättningar med verktyg lämpade för en viss uppgift. Du kan börja med en av arbetsbänkarna i listan, eller med Komplett arbetsbänk, som tillhandahåller några av de mest använda verktygen som samlats in från andra arbetsbänkar. Läs mer om arbetsbänkar på FreeCADs webbplats. Ship Design - Ship Design + Fartygskonstruktion Designing and calculating ships - Designing and calculating ships + Konstruktion och beräkning av fartyg The <b>Ship Design</b> module offers several tools to help ship designers to view, model and calculate profiles and other specific properties of ship hulls. - The <b>Ship Design</b> module offers several tools to help ship designers to view, model and calculate profiles and other specific properties of ship hulls. + Modulen <b>Fartygskonstruktion</b> erbjuder flera verktyg för att hjälpa fartygskonstruktörer att visa, modellera och beräkna profiler och andra specifika egenskaper för fartygsskrov. @@ -273,11 +263,6 @@ http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - - - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Tutorials @@ -288,5 +273,30 @@ http://www.freecadweb.org/wiki/index.php?title=Power_users_hub http://www.freecadweb.org/wiki/index.php?title=Power_users_hub + + + Architectural Design + Arkitektonisk konstruktion + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches + + + + Your version of FreeCAD is up to date. + Your version of FreeCAD is up to date. + + + + There is a new release of FreeCAD available. + There is a new release of FreeCAD available. + diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_uk.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_uk.qm index 423f0cabef..028f58159f 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_uk.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_uk.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_uk.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_uk.ts index a22e98e3c1..b237237c5c 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_uk.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_uk.ts @@ -108,11 +108,6 @@ The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. Робочий простір <b>Архітектурний дизайн</b> спеціально призначений для роботи з архітектурними елементами, такими як стіни та вікна. Починайте з малювання 2D-форм і використовуйте їх як направляючі для побудови архітектурних об'єктів. - - - Architectual Design - Архітектурний дизайн - Working with Meshes @@ -121,7 +116,7 @@ The <b>Mesh Workbench</b> is used to work with Mesh objects. Meshes are simpler 3D objects than Part objects, but they are often easier to import and export to/from other applications. - Робочій простір <b>Сітка</b> використовується для роботи з об'єктами Сітка. Сітки більш прості 3D-об'єкти ніж об'єкт Деталь, але вони часто виявляються легшими для імпортування та експортування у/з інші програми. + Робочій простір <b>Сітка</b> використовується для роботи з об'єктами Сітка. Сітки більш прості 3D-об'єкти ніж об'єкт Деталь, але вони часто виявляються легшими для імпортування та експортування до або з інші програми. @@ -228,11 +223,6 @@ The tutorials section on the FreeCAD website Розділ посібників на сайті FreeCAD - - - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - Цей розділ веб-сайту FreeCAD призначений для сценаріїв python з прикладами, поясненнями та командами API. - A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community @@ -246,7 +236,7 @@ The FreeCAD interface is divided in workbenches, which are sets of tools suited for a specific task. You can start with one of the workbenches in this list, or with the complete workbench, which presents you with some of the most used tools gathered from other workbenches. Click to read more about workbenches on the FreeCAD website. - FreeCAD інтерфейс, поділений на робочі столи, які становлять набір інструментів, що підходить для конкретного завдання. Ви можете почати з одним робочим столом в цьому списку, або з повним робочим столом, який представляє вам деякі з найбільш часто використовуваних інструментів, зібрані від інших робочих столів. Натисніть, щоб прочитати більше про робочі столи на веб-сайті FreeCAD. + Інтерфейс FreeCAD поділений на робочі столи, які складаються з набору інструментів для конкретного завдань. Ви можете почати з одним робочим столом в цьому списку, або з повним робочим столом, який представляє вам деякі з найбільш часто використовуваних інструментів. Натисніть, щоб прочитати більше про робочі столи на веб-сайті FreeCAD. @@ -273,11 +263,6 @@ http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - - - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Tutorials @@ -288,5 +273,30 @@ http://www.freecadweb.org/wiki/index.php?title=Power_users_hub http://www.freecadweb.org/wiki/index.php?title=Power_users_hub + + + Architectural Design + Архітектурне проектування + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches + + + + Your version of FreeCAD is up to date. + Your version of FreeCAD is up to date. + + + + There is a new release of FreeCAD available. + There is a new release of FreeCAD available. + diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_zh-CN.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_zh-CN.qm index c0c0fafe37..b4d6fcb083 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_zh-CN.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_zh-CN.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_zh-CN.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_zh-CN.ts index ce7aecb21e..e1b2e909b1 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_zh-CN.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_zh-CN.ts @@ -108,11 +108,6 @@ The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. <b>建筑设计</b>工作台专用于创建建筑元素,如墙或窗. 首先绘制2D形状,并以此为参考创建建筑对象. - - - Architectual Design - 建筑设计 - Working with Meshes @@ -228,11 +223,6 @@ The tutorials section on the FreeCAD website FreeCAD网站上的教程部分 - - - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - FreeCAD网站上的python脚本部分,包含示例、解释和 API接口. - A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community @@ -273,11 +263,6 @@ http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - - - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Tutorials @@ -288,5 +273,30 @@ http://www.freecadweb.org/wiki/index.php?title=Power_users_hub http://www.freecadweb.org/wiki/index.php?title=Power_users_hub + + + Architectural Design + Architectural Design + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches + + + + Your version of FreeCAD is up to date. + Your version of FreeCAD is up to date. + + + + There is a new release of FreeCAD available. + There is a new release of FreeCAD available. + diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_zh-TW.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_zh-TW.qm index 1b88afb910..36e70e7145 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_zh-TW.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_zh-TW.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_zh-TW.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_zh-TW.ts index 25efc14984..fbc47d479e 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_zh-TW.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_zh-TW.ts @@ -108,11 +108,6 @@ The <b>Architectural Design</b> workbench is specially designed for working with architectural elements such as walls or windows. Start by drawing 2D shapes, and use them as guides to build architecutral objects. <b>建築設計</b>工作平台為特別設計用於建築元件之製作,例如牆面或窗戶。由繪製2D圖型開始並使用其建立建築物件。 - - - Architectual Design - 建築設計 - Working with Meshes @@ -228,11 +223,6 @@ The tutorials section on the FreeCAD website 此教學於FreeCAD網站 - - - The section of the FreeCAd website dedicate dto python scripting, with examples, explanations, and API commands. - FreeCAD網站上python scripting章節內由範例說明及API註解。 - A blog dedicated to teaching FreeCAD, maintained by members of the FreeCAD community @@ -273,11 +263,6 @@ http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc http://www.freecadweb.org/wiki/index.php?title=Online_Help_Toc - - - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Workbench_Concept - http://www.freecadweb.org/wiki/index.php?title=Tutorials @@ -288,5 +273,30 @@ http://www.freecadweb.org/wiki/index.php?title=Power_users_hub http://www.freecadweb.org/wiki/index.php?title=Power_users_hub + + + Architectural Design + 建築設計 + + + + The section of the FreeCAD website dedicated to python scripting, with examples, explanations, and API commands. + 此部份FreeCAD網站以範例說明python腳本及API指令 + + + + http://www.freecadweb.org/wiki/index.php?title=Workbenches + http://www.freecadweb.org/wiki/index.php?title=Workbenches + + + + Your version of FreeCAD is up to date. + 您的FreeCAD為最新版本 + + + + There is a new release of FreeCAD available. + FreeCAD有新版本可以使用 + diff --git a/src/Mod/Test/Gui/Resources/Test.qrc b/src/Mod/Test/Gui/Resources/Test.qrc index 4fb1bcbcda..5d78f19df2 100644 --- a/src/Mod/Test/Gui/Resources/Test.qrc +++ b/src/Mod/Test/Gui/Resources/Test.qrc @@ -23,5 +23,6 @@ translations/Test_zh-CN.qm translations/Test_ro.qm translations/Test_pt-PT.qm + translations/Test_sr.qm diff --git a/src/Mod/Test/Gui/Resources/translations/Test_de.qm b/src/Mod/Test/Gui/Resources/translations/Test_de.qm index ecbd00d43a..31948e5c27 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_de.qm and b/src/Mod/Test/Gui/Resources/translations/Test_de.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_de.ts b/src/Mod/Test/Gui/Resources/translations/Test_de.ts index 953b5fc1fc..83e2b3e085 100644 --- a/src/Mod/Test/Gui/Resources/translations/Test_de.ts +++ b/src/Mod/Test/Gui/Resources/translations/Test_de.ts @@ -1,6 +1,6 @@ - + TestGui::UnitTest diff --git a/src/Mod/Test/Gui/Resources/translations/Test_ja.qm b/src/Mod/Test/Gui/Resources/translations/Test_ja.qm index af5f5026b2..4c61e8e903 100644 Binary files a/src/Mod/Test/Gui/Resources/translations/Test_ja.qm and b/src/Mod/Test/Gui/Resources/translations/Test_ja.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_ja.ts b/src/Mod/Test/Gui/Resources/translations/Test_ja.ts index 45d2e376d1..71d21d9ef4 100644 --- a/src/Mod/Test/Gui/Resources/translations/Test_ja.ts +++ b/src/Mod/Test/Gui/Resources/translations/Test_ja.ts @@ -69,7 +69,7 @@ Failures: - エラー: + 障害: Run: diff --git a/src/Mod/Test/Gui/Resources/translations/Test_sr.qm b/src/Mod/Test/Gui/Resources/translations/Test_sr.qm new file mode 100644 index 0000000000..b1d291c08e Binary files /dev/null and b/src/Mod/Test/Gui/Resources/translations/Test_sr.qm differ diff --git a/src/Mod/Test/Gui/Resources/translations/Test_sr.ts b/src/Mod/Test/Gui/Resources/translations/Test_sr.ts new file mode 100644 index 0000000000..86f6f74780 --- /dev/null +++ b/src/Mod/Test/Gui/Resources/translations/Test_sr.ts @@ -0,0 +1,114 @@ + + + + + TestGui::UnitTest + + FreeCAD UnitTest + FreeCAD UnitTest + + + Failures and errors + Кварови и грешке + + + Description + Опис + + + &Start + &Покрени + + + Alt+S + Алт+C + + + &Help + & Помоћ + + + F1 + F1 + + + &About + &О + + + Alt+A + Alt+A + + + &Close + Zatvori + + + Alt+C + Алт+Ц + + + Idle + Неактиван + + + Progress + Напредак + + + <font color="#0000ff">0</font> + <font color="#0000ff">0</font> + + + Remaining: + Преостали: + + + Errors: + Грешке: + + + Failures: + Кварови: + + + Run: + Покретање: + + + Test + Тест + + + Select test name: + Изаберите назив теста: + + + + TestGui::UnitTestDialog + + Help + Help + + + About FreeCAD UnitTest + О FreeCAD UnitTest програму + + + Copyright (c) Werner Mayer + +FreeCAD UnitTest is part of FreeCAD and supports writing Unit Tests for own modules. + Copyright (c) Werner Mayer + +FreeCAD UnitTest је део FreeCAD програма, и подржава писање јединица Тестови за сопствене модуле. + + + Enter the name of a callable object which, when called, will return a TestCase.Click 'start', and the test thus produced will be run. + +Double click on an error in the tree view to see more information about it,including the stack trace. + Унесите име објекта за звање који,када је позван,вратиће TestCase.Клик 'старт',и тест на тај начин произведен ће се покренути. + +Дупли клик на грешке у приказу стабла да би сте видели више информација о томе,укључујући и стог траг. + + + diff --git a/src/Mod/Web/Gui/Resources/Web.qrc b/src/Mod/Web/Gui/Resources/Web.qrc index 6819343efd..a229961bf1 100644 --- a/src/Mod/Web/Gui/Resources/Web.qrc +++ b/src/Mod/Web/Gui/Resources/Web.qrc @@ -8,5 +8,27 @@ icons/actions/web-stop.svg icons/actions/web-zoom-in.svg icons/actions/web-zoom-out.svg + translations/Web_de.qm + translations/Web_af.qm + translations/Web_zh-CN.qm + translations/Web_zh-TW.qm + translations/Web_hr.qm + translations/Web_cs.qm + translations/Web_nl.qm + translations/Web_fi.qm + translations/Web_fr.qm + translations/Web_hu.qm + translations/Web_ja.qm + translations/Web_no.qm + translations/Web_pl.qm + translations/Web_pt-PT.qm + translations/Web_ro.qm + translations/Web_ru.qm + translations/Web_sr.qm + translations/Web_es-ES.qm + translations/Web_sv-SE.qm + translations/Web_uk.qm + translations/Web_it.qm + translations/Web_pt-BR.qm diff --git a/src/Mod/Web/Gui/Resources/translations/Web_af.qm b/src/Mod/Web/Gui/Resources/translations/Web_af.qm new file mode 100644 index 0000000000..0928ca5759 Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_af.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_af.ts b/src/Mod/Web/Gui/Resources/translations/Web_af.ts new file mode 100644 index 0000000000..98daffe9bc --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_af.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + Web + + + + Previous page + Previous page + + + + Go back to the previous page + Go back to the previous page + + + + CmdWebBrowserNext + + + Web + Web + + + + Next page + Next page + + + + Go to the next page + Go to the next page + + + + CmdWebBrowserRefresh + + + Web + Web + + + + + Refresh web page + Refresh web page + + + + CmdWebBrowserStop + + + Web + Web + + + + Stop loading + Stop loading + + + + Stop the current loading + Stop the current loading + + + + CmdWebBrowserZoomIn + + + Web + Web + + + + Zoom in + Zoom in + + + + Zoom into the page + Zoom into the page + + + + CmdWebBrowserZoomOut + + + Web + Web + + + + Zoom out + Zoom out + + + + Zoom out of the page + Zoom out of the page + + + + CmdWebOpenWebsite + + + Web + Web + + + + Open website... + Open website... + + + + Opens a website in FreeCAD + Opens a website in FreeCAD + + + + QObject + + + Browser + Browser + + + + File does not exist! + File does not exist! + + + + WebGui::BrowserView + + + Error + Fout + + + + Loading %1... + Loading %1... + + + + WebGui::WebView + + + Open in External Browser + Open in External Browser + + + + Workbench + + + Navigation + Navigation + + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web_cs.qm b/src/Mod/Web/Gui/Resources/translations/Web_cs.qm new file mode 100644 index 0000000000..ebe0a97b8e Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_cs.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_cs.ts b/src/Mod/Web/Gui/Resources/translations/Web_cs.ts new file mode 100644 index 0000000000..396c40ae3c --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_cs.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + Web + + + + Previous page + Previous page + + + + Go back to the previous page + Go back to the previous page + + + + CmdWebBrowserNext + + + Web + Web + + + + Next page + Next page + + + + Go to the next page + Go to the next page + + + + CmdWebBrowserRefresh + + + Web + Web + + + + + Refresh web page + Refresh web page + + + + CmdWebBrowserStop + + + Web + Web + + + + Stop loading + Stop loading + + + + Stop the current loading + Stop the current loading + + + + CmdWebBrowserZoomIn + + + Web + Web + + + + Zoom in + Zoom in + + + + Zoom into the page + Zoom into the page + + + + CmdWebBrowserZoomOut + + + Web + Web + + + + Zoom out + Zoom out + + + + Zoom out of the page + Zoom out of the page + + + + CmdWebOpenWebsite + + + Web + Web + + + + Open website... + Open website... + + + + Opens a website in FreeCAD + Opens a website in FreeCAD + + + + QObject + + + Browser + Browser + + + + File does not exist! + File does not exist! + + + + WebGui::BrowserView + + + Error + Chyba + + + + Loading %1... + Loading %1... + + + + WebGui::WebView + + + Open in External Browser + Open in External Browser + + + + Workbench + + + Navigation + Navigation + + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web_de.qm b/src/Mod/Web/Gui/Resources/translations/Web_de.qm new file mode 100644 index 0000000000..60faae1d4c Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_de.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_de.ts b/src/Mod/Web/Gui/Resources/translations/Web_de.ts new file mode 100644 index 0000000000..8481c1512c --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_de.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + Web + + + + Previous page + Vorherige Seite + + + + Go back to the previous page + Zurück zur vorherigen Seite + + + + CmdWebBrowserNext + + + Web + Web + + + + Next page + Nächste Seite + + + + Go to the next page + Zur nächsten Seite + + + + CmdWebBrowserRefresh + + + Web + Web + + + + + Refresh web page + Webseite aktualisieren + + + + CmdWebBrowserStop + + + Web + Web + + + + Stop loading + Ladevorgang anhalten + + + + Stop the current loading + Den aktuellen Ladevorgang anhalten + + + + CmdWebBrowserZoomIn + + + Web + Web + + + + Zoom in + Vergrößern + + + + Zoom into the page + Seite vergrößern + + + + CmdWebBrowserZoomOut + + + Web + Web + + + + Zoom out + Verkleinern + + + + Zoom out of the page + Seite verkleinern + + + + CmdWebOpenWebsite + + + Web + Web + + + + Open website... + Webseite öffnen... + + + + Opens a website in FreeCAD + Öffnet eine Webseite in FreeCAD + + + + QObject + + + Browser + Browser + + + + File does not exist! + Datei nicht vorhanden! + + + + WebGui::BrowserView + + + Error + Fehlermeldungen + + + + Loading %1... + %1 wird geladen... + + + + WebGui::WebView + + + Open in External Browser + In externem Browser öffnen + + + + Workbench + + + Navigation + Navigation + + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web_es-ES.qm b/src/Mod/Web/Gui/Resources/translations/Web_es-ES.qm new file mode 100644 index 0000000000..1a3144e35f Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_es-ES.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_es-ES.ts b/src/Mod/Web/Gui/Resources/translations/Web_es-ES.ts new file mode 100644 index 0000000000..c7258eeff0 --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_es-ES.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + Web + + + + Previous page + Página anterior + + + + Go back to the previous page + Volver a la página anterior + + + + CmdWebBrowserNext + + + Web + Web + + + + Next page + Página siguiente + + + + Go to the next page + Ir a la página siguiente + + + + CmdWebBrowserRefresh + + + Web + Web + + + + + Refresh web page + Actualizar la página web + + + + CmdWebBrowserStop + + + Web + Web + + + + Stop loading + Detener la carga + + + + Stop the current loading + Detener la carga actual + + + + CmdWebBrowserZoomIn + + + Web + Web + + + + Zoom in + Acercar + + + + Zoom into the page + Acercar pagina + + + + CmdWebBrowserZoomOut + + + Web + Web + + + + Zoom out + Alejar + + + + Zoom out of the page + Alejar página + + + + CmdWebOpenWebsite + + + Web + Web + + + + Open website... + Abrir sitio Web... + + + + Opens a website in FreeCAD + Abrir sitio web en FreeCAD + + + + QObject + + + Browser + Navegador + + + + File does not exist! + ¡El archivo no existe! + + + + WebGui::BrowserView + + + Error + Error + + + + Loading %1... + Cargando %1... + + + + WebGui::WebView + + + Open in External Browser + Abrir en navegador externo + + + + Workbench + + + Navigation + Navegación + + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web_fi.qm b/src/Mod/Web/Gui/Resources/translations/Web_fi.qm new file mode 100644 index 0000000000..ea90954891 Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_fi.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_fi.ts b/src/Mod/Web/Gui/Resources/translations/Web_fi.ts new file mode 100644 index 0000000000..65ea3666a8 --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_fi.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + Web + + + + Previous page + Edellinen sivu + + + + Go back to the previous page + Siirry takaisin edelliselle sivulle + + + + CmdWebBrowserNext + + + Web + Web + + + + Next page + Seuraava sivu + + + + Go to the next page + Siirry seuraavalle sivulle + + + + CmdWebBrowserRefresh + + + Web + Web + + + + + Refresh web page + Päivitä web-sivu + + + + CmdWebBrowserStop + + + Web + Web + + + + Stop loading + Lopeta lataaminen + + + + Stop the current loading + Lopeta nykyinen lataaminen + + + + CmdWebBrowserZoomIn + + + Web + Web + + + + Zoom in + Lähennä + + + + Zoom into the page + Suurentaa sivun kokoiseksi + + + + CmdWebBrowserZoomOut + + + Web + Web + + + + Zoom out + Loitonna + + + + Zoom out of the page + Suurenna sivusta ulos + + + + CmdWebOpenWebsite + + + Web + Web + + + + Open website... + Avaa sivusto... + + + + Opens a website in FreeCAD + Avaa FreeCADin Web-sivun + + + + QObject + + + Browser + Selain + + + + File does not exist! + Tiedostoa ei ole! + + + + WebGui::BrowserView + + + Error + Virhe + + + + Loading %1... + Ladataan %1... + + + + WebGui::WebView + + + Open in External Browser + Avaa ulkoisella selaimella + + + + Workbench + + + Navigation + Siirtyminen + + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web_fr.qm b/src/Mod/Web/Gui/Resources/translations/Web_fr.qm new file mode 100644 index 0000000000..4d2798b4d4 Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_fr.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_fr.ts b/src/Mod/Web/Gui/Resources/translations/Web_fr.ts new file mode 100644 index 0000000000..bbb1f0fad3 --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_fr.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + Web + + + + Previous page + Page précédente + + + + Go back to the previous page + Revenir à la page précédente + + + + CmdWebBrowserNext + + + Web + Web + + + + Next page + Page suivante + + + + Go to the next page + Aller à la page suivante + + + + CmdWebBrowserRefresh + + + Web + Web + + + + + Refresh web page + Actualiser la page web + + + + CmdWebBrowserStop + + + Web + Web + + + + Stop loading + Arrêter le chargement + + + + Stop the current loading + Arrêter le chargement actuel + + + + CmdWebBrowserZoomIn + + + Web + Web + + + + Zoom in + Zoom + + + + + Zoom into the page + Zoomer dans la page + + + + CmdWebBrowserZoomOut + + + Web + Web + + + + Zoom out + Zoom - + + + + Zoom out of the page + Zoom arrière sur la page + + + + CmdWebOpenWebsite + + + Web + Web + + + + Open website... + Ouvrir le site Web... + + + + Opens a website in FreeCAD + Ouvre un site Web dans FreeCAD + + + + QObject + + + Browser + Navigateur + + + + File does not exist! + Le fichier n'existe pas! + + + + WebGui::BrowserView + + + Error + Erreur + + + + Loading %1... + Chargement %1... + + + + WebGui::WebView + + + Open in External Browser + Ouvrir dans un navigateur externe + + + + Workbench + + + Navigation + Navigation + + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web_hr.qm b/src/Mod/Web/Gui/Resources/translations/Web_hr.qm new file mode 100644 index 0000000000..04058ce5e5 Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_hr.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_hr.ts b/src/Mod/Web/Gui/Resources/translations/Web_hr.ts new file mode 100644 index 0000000000..dd5c921144 --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_hr.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + Web + + + + Previous page + Previous page + + + + Go back to the previous page + Go back to the previous page + + + + CmdWebBrowserNext + + + Web + Web + + + + Next page + Next page + + + + Go to the next page + Go to the next page + + + + CmdWebBrowserRefresh + + + Web + Web + + + + + Refresh web page + Refresh web page + + + + CmdWebBrowserStop + + + Web + Web + + + + Stop loading + Stop loading + + + + Stop the current loading + Stop the current loading + + + + CmdWebBrowserZoomIn + + + Web + Web + + + + Zoom in + Zoom in + + + + Zoom into the page + Zoom into the page + + + + CmdWebBrowserZoomOut + + + Web + Web + + + + Zoom out + Zoom out + + + + Zoom out of the page + Zoom out of the page + + + + CmdWebOpenWebsite + + + Web + Web + + + + Open website... + Open website... + + + + Opens a website in FreeCAD + Opens a website in FreeCAD + + + + QObject + + + Browser + Browser + + + + File does not exist! + File does not exist! + + + + WebGui::BrowserView + + + Error + Pogreška + + + + Loading %1... + Loading %1... + + + + WebGui::WebView + + + Open in External Browser + Open in External Browser + + + + Workbench + + + Navigation + Navigation + + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web_hu.qm b/src/Mod/Web/Gui/Resources/translations/Web_hu.qm new file mode 100644 index 0000000000..2be67ad491 Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_hu.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_hu.ts b/src/Mod/Web/Gui/Resources/translations/Web_hu.ts new file mode 100644 index 0000000000..f1ebef6b54 --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_hu.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + Web + + + + Previous page + Previous page + + + + Go back to the previous page + Go back to the previous page + + + + CmdWebBrowserNext + + + Web + Web + + + + Next page + Next page + + + + Go to the next page + Go to the next page + + + + CmdWebBrowserRefresh + + + Web + Web + + + + + Refresh web page + Refresh web page + + + + CmdWebBrowserStop + + + Web + Web + + + + Stop loading + Stop loading + + + + Stop the current loading + Stop the current loading + + + + CmdWebBrowserZoomIn + + + Web + Web + + + + Zoom in + Zoom in + + + + Zoom into the page + Zoom into the page + + + + CmdWebBrowserZoomOut + + + Web + Web + + + + Zoom out + Zoom out + + + + Zoom out of the page + Zoom out of the page + + + + CmdWebOpenWebsite + + + Web + Web + + + + Open website... + Open website... + + + + Opens a website in FreeCAD + Opens a website in FreeCAD + + + + QObject + + + Browser + Browser + + + + File does not exist! + File does not exist! + + + + WebGui::BrowserView + + + Error + Hiba + + + + Loading %1... + Loading %1... + + + + WebGui::WebView + + + Open in External Browser + Open in External Browser + + + + Workbench + + + Navigation + Navigation + + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web_it.qm b/src/Mod/Web/Gui/Resources/translations/Web_it.qm new file mode 100644 index 0000000000..3fbaf45afa Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_it.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_it.ts b/src/Mod/Web/Gui/Resources/translations/Web_it.ts new file mode 100644 index 0000000000..27573a8d14 --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_it.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + Web + + + + Previous page + Pagina precedente + + + + Go back to the previous page + Torna alla pagina precedente + + + + CmdWebBrowserNext + + + Web + Web + + + + Next page + Pagina successiva + + + + Go to the next page + Vai alla pagina successiva + + + + CmdWebBrowserRefresh + + + Web + Web + + + + + Refresh web page + Aggiorna la pagina web + + + + CmdWebBrowserStop + + + Web + Web + + + + Stop loading + Interrompi il caricamento + + + + Stop the current loading + Interrompi il caricamento corrente + + + + CmdWebBrowserZoomIn + + + Web + Web + + + + Zoom in + Ingrandisci + + + + Zoom into the page + Ingrandisci la pagina + + + + CmdWebBrowserZoomOut + + + Web + Web + + + + Zoom out + Riduci + + + + Zoom out of the page + Riduci la pagina + + + + CmdWebOpenWebsite + + + Web + Web + + + + Open website... + Apri il sito web... + + + + Opens a website in FreeCAD + Apri un sito Web in FreeCAD + + + + QObject + + + Browser + Browser + + + + File does not exist! + Il file non esiste! + + + + WebGui::BrowserView + + + Error + Errore + + + + Loading %1... + Caricamento %1... + + + + WebGui::WebView + + + Open in External Browser + Apri nel Browser esterno + + + + Workbench + + + Navigation + Navigazione + + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ja.qm b/src/Mod/Web/Gui/Resources/translations/Web_ja.qm new file mode 100644 index 0000000000..35b5831d3e Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_ja.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ja.ts b/src/Mod/Web/Gui/Resources/translations/Web_ja.ts new file mode 100644 index 0000000000..cd145dc218 --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_ja.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + ウェブ + + + + Previous page + 前のページ + + + + Go back to the previous page + 前のページに戻る + + + + CmdWebBrowserNext + + + Web + ウェブ + + + + Next page + 次のページ + + + + Go to the next page + 次のページに進む + + + + CmdWebBrowserRefresh + + + Web + ウェブ + + + + + Refresh web page + ウェブページを更新 + + + + CmdWebBrowserStop + + + Web + ウェブ + + + + Stop loading + 読み込みを中止 + + + + Stop the current loading + 現在の読み込みを中止 + + + + CmdWebBrowserZoomIn + + + Web + ウェブ + + + + Zoom in + ズームイン + + + + Zoom into the page + ページを拡大 + + + + CmdWebBrowserZoomOut + + + Web + ウェブ + + + + Zoom out + ズームアウト + + + + Zoom out of the page + ページを縮小 + + + + CmdWebOpenWebsite + + + Web + ウェブ + + + + Open website... + ウェブサイトを開く + + + + Opens a website in FreeCAD + FreeCAD でウェブサイトを開く + + + + QObject + + + Browser + ブラウザー + + + + File does not exist! + ファイルが存在しません! + + + + WebGui::BrowserView + + + Error + エラー + + + + Loading %1... + %1 を読み込み中・・・ + + + + WebGui::WebView + + + Open in External Browser + 外部ブラウザーで開く + + + + Workbench + + + Navigation + ナビゲーション + + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web_nl.qm b/src/Mod/Web/Gui/Resources/translations/Web_nl.qm new file mode 100644 index 0000000000..7f395d1ae1 Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_nl.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_nl.ts b/src/Mod/Web/Gui/Resources/translations/Web_nl.ts new file mode 100644 index 0000000000..c24ad0c1a1 --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_nl.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + Web + + + + Previous page + Vorige pagina + + + + Go back to the previous page + Teruggaan naar de vorige pagina + + + + CmdWebBrowserNext + + + Web + Web + + + + Next page + Volgende pagina + + + + Go to the next page + Naar de volgende pagina gaan + + + + CmdWebBrowserRefresh + + + Web + Web + + + + + Refresh web page + Refresh web page + + + + CmdWebBrowserStop + + + Web + Web + + + + Stop loading + Stoppen met laden + + + + Stop the current loading + Stop the current loading + + + + CmdWebBrowserZoomIn + + + Web + Web + + + + Zoom in + Inzoomen + + + + Zoom into the page + Zoom into the page + + + + CmdWebBrowserZoomOut + + + Web + Web + + + + Zoom out + Uitzoomen + + + + Zoom out of the page + Zoom out of the page + + + + CmdWebOpenWebsite + + + Web + Web + + + + Open website... + Website openen... + + + + Opens a website in FreeCAD + Opent een website in FreeCAD + + + + QObject + + + Browser + Browser + + + + File does not exist! + Bestand bestaat niet! + + + + WebGui::BrowserView + + + Error + Fout + + + + Loading %1... + Loading %1... + + + + WebGui::WebView + + + Open in External Browser + Open in External Browser + + + + Workbench + + + Navigation + Navigation + + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web_no.qm b/src/Mod/Web/Gui/Resources/translations/Web_no.qm new file mode 100644 index 0000000000..a563747504 Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_no.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_no.ts b/src/Mod/Web/Gui/Resources/translations/Web_no.ts new file mode 100644 index 0000000000..5f33ed51b4 --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_no.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + Web + + + + Previous page + Previous page + + + + Go back to the previous page + Go back to the previous page + + + + CmdWebBrowserNext + + + Web + Web + + + + Next page + Next page + + + + Go to the next page + Go to the next page + + + + CmdWebBrowserRefresh + + + Web + Web + + + + + Refresh web page + Refresh web page + + + + CmdWebBrowserStop + + + Web + Web + + + + Stop loading + Stop loading + + + + Stop the current loading + Stop the current loading + + + + CmdWebBrowserZoomIn + + + Web + Web + + + + Zoom in + Zoom in + + + + Zoom into the page + Zoom into the page + + + + CmdWebBrowserZoomOut + + + Web + Web + + + + Zoom out + Zoom out + + + + Zoom out of the page + Zoom out of the page + + + + CmdWebOpenWebsite + + + Web + Web + + + + Open website... + Open website... + + + + Opens a website in FreeCAD + Opens a website in FreeCAD + + + + QObject + + + Browser + Browser + + + + File does not exist! + File does not exist! + + + + WebGui::BrowserView + + + Error + Feil + + + + Loading %1... + Loading %1... + + + + WebGui::WebView + + + Open in External Browser + Open in External Browser + + + + Workbench + + + Navigation + Navigation + + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web_pl.qm b/src/Mod/Web/Gui/Resources/translations/Web_pl.qm new file mode 100644 index 0000000000..80d659f5df Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_pl.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_pl.ts b/src/Mod/Web/Gui/Resources/translations/Web_pl.ts new file mode 100644 index 0000000000..fdde62d5c8 --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_pl.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + Sieć www + + + + Previous page + Poprzednia strona + + + + Go back to the previous page + Idź do poprzedniej strony + + + + CmdWebBrowserNext + + + Web + Sieć www + + + + Next page + Kolejna strona + + + + Go to the next page + Idź do kolejnej strony + + + + CmdWebBrowserRefresh + + + Web + Sieć www + + + + + Refresh web page + Odśwież stronę + + + + CmdWebBrowserStop + + + Web + Sieć www + + + + Stop loading + Zatrzymaj ładowanie + + + + Stop the current loading + Zatrzymaj bieżące ładowanie + + + + CmdWebBrowserZoomIn + + + Web + Sieć www + + + + Zoom in + Powiększ + + + + Zoom into the page + Powiększ stronę + + + + CmdWebBrowserZoomOut + + + Web + Sieć www + + + + Zoom out + Pomniejsz + + + + Zoom out of the page + Pomniejsz stronę + + + + CmdWebOpenWebsite + + + Web + Sieć www + + + + Open website... + Otwórz stronę... + + + + Opens a website in FreeCAD + Otwórz stronę we FreeCAD'zie + + + + QObject + + + Browser + Przeglądarka + + + + File does not exist! + Plik nie istnieje! + + + + WebGui::BrowserView + + + Error + Błąd + + + + Loading %1... + Ładowanie %1... + + + + WebGui::WebView + + + Open in External Browser + Otwórz w zewnętrznej przeglądarce + + + + Workbench + + + Navigation + Nawigacja + + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.qm b/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.qm new file mode 100644 index 0000000000..afdc294428 Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.ts b/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.ts new file mode 100644 index 0000000000..9103634da2 --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_pt-BR.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + Web + + + + Previous page + Página anterior + + + + Go back to the previous page + Voltar à página anterior + + + + CmdWebBrowserNext + + + Web + Web + + + + Next page + Próxima página + + + + Go to the next page + Ir para a próxima página + + + + CmdWebBrowserRefresh + + + Web + Web + + + + + Refresh web page + Atualizar a página + + + + CmdWebBrowserStop + + + Web + Web + + + + Stop loading + Parar + + + + Stop the current loading + Parar o carregamento da página + + + + CmdWebBrowserZoomIn + + + Web + Web + + + + Zoom in + Ampliar + + + + Zoom into the page + Ampliar o tamanho da página + + + + CmdWebBrowserZoomOut + + + Web + Web + + + + Zoom out + Diminuir + + + + Zoom out of the page + Diminuir ao tamanho da página + + + + CmdWebOpenWebsite + + + Web + Web + + + + Open website... + Abrir página... + + + + Opens a website in FreeCAD + Abrir uma página da web no FreeCAD + + + + QObject + + + Browser + Navegador + + + + File does not exist! + Esse arquivo não existe! + + + + WebGui::BrowserView + + + Error + Erro + + + + Loading %1... + Carregando %1... + + + + WebGui::WebView + + + Open in External Browser + Abrir em um navegador externo + + + + Workbench + + + Navigation + Navegação + + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.qm b/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.qm new file mode 100644 index 0000000000..04523fa269 Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.ts b/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.ts new file mode 100644 index 0000000000..e6f3230512 --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_pt-PT.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + Internet + + + + Previous page + Página anterior + + + + Go back to the previous page + Voltar à pagina anterior + + + + CmdWebBrowserNext + + + Web + Internet + + + + Next page + Página seguinte + + + + Go to the next page + Avançar página + + + + CmdWebBrowserRefresh + + + Web + Internet + + + + + Refresh web page + Refrescar a página + + + + CmdWebBrowserStop + + + Web + Internet + + + + Stop loading + Parar a carga + + + + Stop the current loading + Parar a carga atual + + + + CmdWebBrowserZoomIn + + + Web + Internet + + + + Zoom in + Aproximar + + + + Zoom into the page + Aproximar da página + + + + CmdWebBrowserZoomOut + + + Web + Internet + + + + Zoom out + Afastar + + + + Zoom out of the page + Afastar da página + + + + CmdWebOpenWebsite + + + Web + Internet + + + + Open website... + Abrir uma página de internet... + + + + Opens a website in FreeCAD + Abre uma página de internet no FreeCad + + + + QObject + + + Browser + Navegador + + + + File does not exist! + O ficheiro não existe! + + + + WebGui::BrowserView + + + Error + Erro + + + + Loading %1... + Carregando %1... + + + + WebGui::WebView + + + Open in External Browser + Abrir em Navegador Externo + + + + Workbench + + + Navigation + Navegação + + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ro.qm b/src/Mod/Web/Gui/Resources/translations/Web_ro.qm new file mode 100644 index 0000000000..f65c674213 Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_ro.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ro.ts b/src/Mod/Web/Gui/Resources/translations/Web_ro.ts new file mode 100644 index 0000000000..9da063d689 --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_ro.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + Web + + + + Previous page + Pagina anterioară + + + + Go back to the previous page + Revino la pagina anterioară + + + + CmdWebBrowserNext + + + Web + Web + + + + Next page + Pagina următoare + + + + Go to the next page + Avansează la pagina următoare + + + + CmdWebBrowserRefresh + + + Web + Web + + + + + Refresh web page + Reâmprospătează pagina web + + + + CmdWebBrowserStop + + + Web + Web + + + + Stop loading + Oprește încărcarea + + + + Stop the current loading + Oprește încărcarea actuală + + + + CmdWebBrowserZoomIn + + + Web + Web + + + + Zoom in + Mărește + + + + Zoom into the page + Mărește în pagină + + + + CmdWebBrowserZoomOut + + + Web + Web + + + + Zoom out + Micșorează + + + + Zoom out of the page + Micșorează pagina + + + + CmdWebOpenWebsite + + + Web + Web + + + + Open website... + Deschide pagina web... + + + + Opens a website in FreeCAD + Deschide o pagină web în FreeCAD + + + + QObject + + + Browser + Navigator + + + + File does not exist! + Fișierul nu există! + + + + WebGui::BrowserView + + + Error + Eroare + + + + Loading %1... + Se încarcă %1... + + + + WebGui::WebView + + + Open in External Browser + Deschide în navigator extern + + + + Workbench + + + Navigation + Navigare + + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ru.qm b/src/Mod/Web/Gui/Resources/translations/Web_ru.qm new file mode 100644 index 0000000000..95672213ed Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_ru.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_ru.ts b/src/Mod/Web/Gui/Resources/translations/Web_ru.ts new file mode 100644 index 0000000000..32f1e6a7b0 --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_ru.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + Сеть + + + + Previous page + Предыдущая страница + + + + Go back to the previous page + Вернуться на предыдущую страницу + + + + CmdWebBrowserNext + + + Web + Сеть + + + + Next page + Следующая страница + + + + Go to the next page + Перейти на следующую страницу + + + + CmdWebBrowserRefresh + + + Web + Сеть + + + + + Refresh web page + Обновить веб-страницу + + + + CmdWebBrowserStop + + + Web + Сеть + + + + Stop loading + Остановить загрузку + + + + Stop the current loading + Остановить текущую загрузку + + + + CmdWebBrowserZoomIn + + + Web + Сеть + + + + Zoom in + Увеличить + + + + Zoom into the page + Увеличить страницу + + + + CmdWebBrowserZoomOut + + + Web + Сеть + + + + Zoom out + Уменьшить + + + + Zoom out of the page + Уменьшить страницу + + + + CmdWebOpenWebsite + + + Web + Сеть + + + + Open website... + Открыть сайт... + + + + Opens a website in FreeCAD + Открывает веб-сайт в FreeCAD + + + + QObject + + + Browser + Браузер + + + + File does not exist! + Файл не существует! + + + + WebGui::BrowserView + + + Error + Ошибка + + + + Loading %1... + Загрузка %1... + + + + WebGui::WebView + + + Open in External Browser + Открыть во внешнем браузере + + + + Workbench + + + Navigation + Навигация + + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web_sr.qm b/src/Mod/Web/Gui/Resources/translations/Web_sr.qm new file mode 100644 index 0000000000..54dce7a669 Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_sr.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_sr.ts b/src/Mod/Web/Gui/Resources/translations/Web_sr.ts new file mode 100644 index 0000000000..086986594e --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_sr.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + Интернет + + + + Previous page + Претходна cтраница + + + + Go back to the previous page + Иди назад на претходну cтраницу + + + + CmdWebBrowserNext + + + Web + Интернет + + + + Next page + Cледећа cтраница + + + + Go to the next page + Иди на cледећу cтраницу + + + + CmdWebBrowserRefresh + + + Web + Интернет + + + + + Refresh web page + Оcвежи cтраницу + + + + CmdWebBrowserStop + + + Web + Интернет + + + + Stop loading + Зауcтави учитавање + + + + Stop the current loading + Зауcтави тренутно учитавање + + + + CmdWebBrowserZoomIn + + + Web + Интернет + + + + Zoom in + Увеличај + + + + Zoom into the page + Увеличај страницу + + + + CmdWebBrowserZoomOut + + + Web + Интернет + + + + Zoom out + Умањи + + + + Zoom out of the page + Умањи страницу + + + + CmdWebOpenWebsite + + + Web + Интернет + + + + Open website... + Отвори веб сајт... + + + + Opens a website in FreeCAD + Отвара веб сајт у FreeCAD + + + + QObject + + + Browser + Прегледач + + + + File does not exist! + Датотека не пcтоји! + + + + WebGui::BrowserView + + + Error + Грешка + + + + Loading %1... + Учитавање %1... + + + + WebGui::WebView + + + Open in External Browser + Отвори у Екстерном Прегледачу + + + + Workbench + + + Navigation + Навигација + + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.qm b/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.qm new file mode 100644 index 0000000000..d8ef9383e8 Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.ts b/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.ts new file mode 100644 index 0000000000..f5cff67613 --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_sv-SE.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + Webb + + + + Previous page + Föregående sida + + + + Go back to the previous page + Go back to the previous page + + + + CmdWebBrowserNext + + + Web + Webb + + + + Next page + Nästa sida + + + + Go to the next page + Gå till nästa sida + + + + CmdWebBrowserRefresh + + + Web + Webb + + + + + Refresh web page + Uppdatera websidan + + + + CmdWebBrowserStop + + + Web + Webb + + + + Stop loading + Stop loading + + + + Stop the current loading + Stop the current loading + + + + CmdWebBrowserZoomIn + + + Web + Webb + + + + Zoom in + Zooma in + + + + Zoom into the page + Zoom into the page + + + + CmdWebBrowserZoomOut + + + Web + Webb + + + + Zoom out + Zooma ut + + + + Zoom out of the page + Zoom out of the page + + + + CmdWebOpenWebsite + + + Web + Webb + + + + Open website... + Open website... + + + + Opens a website in FreeCAD + Opens a website in FreeCAD + + + + QObject + + + Browser + Browser + + + + File does not exist! + File does not exist! + + + + WebGui::BrowserView + + + Error + Fel + + + + Loading %1... + Loading %1... + + + + WebGui::WebView + + + Open in External Browser + Open in External Browser + + + + Workbench + + + Navigation + Navigation + + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web_uk.qm b/src/Mod/Web/Gui/Resources/translations/Web_uk.qm new file mode 100644 index 0000000000..e94d714c9d Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_uk.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_uk.ts b/src/Mod/Web/Gui/Resources/translations/Web_uk.ts new file mode 100644 index 0000000000..f05fa7f348 --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_uk.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + Веб + + + + Previous page + Попередня сторінка + + + + Go back to the previous page + Повернутися на попередню сторінку + + + + CmdWebBrowserNext + + + Web + Веб + + + + Next page + Наступна сторінка + + + + Go to the next page + Перейти на наступну сторінку + + + + CmdWebBrowserRefresh + + + Web + Веб + + + + + Refresh web page + Оновити веб-сторінку + + + + CmdWebBrowserStop + + + Web + Веб + + + + Stop loading + Зупинити завантаження + + + + Stop the current loading + Зупинити поточне завантаження + + + + CmdWebBrowserZoomIn + + + Web + Веб + + + + Zoom in + Збільшити масштаб + + + + Zoom into the page + Збільшити масштаб до розміру сторінки + + + + CmdWebBrowserZoomOut + + + Web + Веб + + + + Zoom out + Зменшити масштаб + + + + Zoom out of the page + Зменшити масштаб до розміру сторінки + + + + CmdWebOpenWebsite + + + Web + Веб + + + + Open website... + Відкрити веб-сайт... + + + + Opens a website in FreeCAD + Веб-сайт відкривається у FreeCAD + + + + QObject + + + Browser + Браузер + + + + File does not exist! + Файл не існує! + + + + WebGui::BrowserView + + + Error + Помилка + + + + Loading %1... + Завантаження %1... + + + + WebGui::WebView + + + Open in External Browser + Відкрити у зовнішньому браузері + + + + Workbench + + + Navigation + Навігація + + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.qm b/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.qm new file mode 100644 index 0000000000..7de6f13705 Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.ts b/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.ts new file mode 100644 index 0000000000..86aa1ea9cf --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_zh-CN.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + Web + + + + Previous page + Previous page + + + + Go back to the previous page + Go back to the previous page + + + + CmdWebBrowserNext + + + Web + Web + + + + Next page + Next page + + + + Go to the next page + Go to the next page + + + + CmdWebBrowserRefresh + + + Web + Web + + + + + Refresh web page + Refresh web page + + + + CmdWebBrowserStop + + + Web + Web + + + + Stop loading + Stop loading + + + + Stop the current loading + Stop the current loading + + + + CmdWebBrowserZoomIn + + + Web + Web + + + + Zoom in + Zoom in + + + + Zoom into the page + Zoom into the page + + + + CmdWebBrowserZoomOut + + + Web + Web + + + + Zoom out + Zoom out + + + + Zoom out of the page + Zoom out of the page + + + + CmdWebOpenWebsite + + + Web + Web + + + + Open website... + Open website... + + + + Opens a website in FreeCAD + Opens a website in FreeCAD + + + + QObject + + + Browser + Browser + + + + File does not exist! + File does not exist! + + + + WebGui::BrowserView + + + Error + 错误 + + + + Loading %1... + Loading %1... + + + + WebGui::WebView + + + Open in External Browser + Open in External Browser + + + + Workbench + + + Navigation + Navigation + + + diff --git a/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.qm b/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.qm new file mode 100644 index 0000000000..e05316a6d4 Binary files /dev/null and b/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.qm differ diff --git a/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.ts b/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.ts new file mode 100644 index 0000000000..86d337702d --- /dev/null +++ b/src/Mod/Web/Gui/Resources/translations/Web_zh-TW.ts @@ -0,0 +1,168 @@ + + + + + CmdWebBrowserBack + + + Web + 網站 + + + + Previous page + 上一頁 + + + + Go back to the previous page + 回到上一頁 + + + + CmdWebBrowserNext + + + Web + 網站 + + + + Next page + 下一頁 + + + + Go to the next page + 前進下一頁 + + + + CmdWebBrowserRefresh + + + Web + 網站 + + + + + Refresh web page + 更新網頁 + + + + CmdWebBrowserStop + + + Web + 網站 + + + + Stop loading + 停止載入 + + + + Stop the current loading + 停止目前載入動作 + + + + CmdWebBrowserZoomIn + + + Web + 網站 + + + + Zoom in + 放大 + + + + Zoom into the page + 放大頁面 + + + + CmdWebBrowserZoomOut + + + Web + 網站 + + + + Zoom out + 縮小 + + + + Zoom out of the page + 縮小頁面 + + + + CmdWebOpenWebsite + + + Web + 網站 + + + + Open website... + 開啟網頁... + + + + Opens a website in FreeCAD + 於FreeCAD中開啟網頁 + + + + QObject + + + Browser + 瀏覽器 + + + + File does not exist! + 檔案不存在! + + + + WebGui::BrowserView + + + Error + 錯誤 + + + + Loading %1... + 載入 %1... + + + + WebGui::WebView + + + Open in External Browser + 於外部瀏覽器開啟 + + + + Workbench + + + Navigation + 導覽 + + + diff --git a/src/Tools/updateTranslations.py b/src/Tools/updateTranslations.py index a261fc1732..ef4582e256 100755 --- a/src/Tools/updateTranslations.py +++ b/src/Tools/updateTranslations.py @@ -87,8 +87,10 @@ locations = [["Arch","../Mod/Arch/Resources/translations","../Mod/Arch/Resources ["Test","../Mod/Test/Gui/Resources/translations","../Mod/Test/Gui/Resources/Test.qrc"], ["Ship","../Mod/Ship/resources/translations","../Mod/Ship/resources/Ship.qrc"], ["Plot","../Mod/Plot/resources/translations","../Mod/Plot/resources/Plot.qrc"], - ["Test","../Mod/Web/Gui/Resources/translations","../Mod/Web/Gui/Resources/Web.qrc"], - ["Spreadheet","../Mod/Spreadsheet/Gui/Resources/translations","../Mod/Spreadsheet/Gui/Resources/Spreadsheet.qrc"]] + ["Web","../Mod/Web/Gui/Resources/translations","../Mod/Web/Gui/Resources/Web.qrc"], + ["Spreadsheet","../Mod/Spreadsheet/Gui/Resources/translations","../Mod/Spreadsheet/Gui/Resources/Spreadsheet.qrc"]] + +default_languages = "af zh-CN zh-TW hr cs nl fi fr de hu ja no pl pt-PT ro ru sr es-ES sv-SE uk it pt-BR" def updateqrc(qrcpath,lncode): "updates a qrc file with the given translation entry" @@ -128,7 +130,11 @@ def updateqrc(qrcpath,lncode): # inserting new entry just after the last one line = resources[pos] - line = re.sub("_.*\.qm","_"+lncode+".qm",line) + if ".qm" in line: + line = re.sub("_.*\.qm","_"+lncode+".qm",line) + else: + print "ERROR: no existing qm entry in this resource: Please add one manually " + qrcpath + sys.exit() print "inserting line: ",line resources.insert(pos+1,line) @@ -156,6 +162,9 @@ def doFile(tsfilepath,targetpath,lncode,qrcpath): def doLanguage(lncode,fmodule=""): " treats a single language" + if lncode == "en": + # never treat "english" translation... For now :) + return mods = [] if fmodule: for l in locations: @@ -230,7 +239,9 @@ if __name__ == "__main__": zfile.extractall() os.chdir(currentfolder) if not args: - args = [o for o in os.listdir(tempfolder) if o != "freecad.zip"] + #args = [o for o in os.listdir(tempfolder) if o != "freecad.zip"] + # do not treat all languages in the zip file. Some are not translated enough. + args = default_languages.split() for ln in args: if not os.path.exists(tempfolder + os.sep + ln): print "ERROR: language path for " + ln + " not found!"