diff --git a/src/Mod/Arch/Resources/translations/Arch.ts b/src/Mod/Arch/Resources/translations/Arch.ts index 34bbbdc2c0..ad2ab01ffa 100644 --- a/src/Mod/Arch/Resources/translations/Arch.ts +++ b/src/Mod/Arch/Resources/translations/Arch.ts @@ -43,12 +43,12 @@ - + Other shapes that are appended to this object - + Other shapes that are subtracted from this object @@ -78,7 +78,7 @@ - + The area of the projection of this object onto the XY plane @@ -143,12 +143,12 @@ - + The length of this element, if not based on a profile - + The width of this element, if not based on a profile @@ -193,12 +193,12 @@ - + The facemaker type to use to build the profile of this object - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) @@ -348,7 +348,7 @@ - + The structural nodes of this element @@ -663,82 +663,82 @@ - + The base terrain of this site - + The postal or zip code of this site - + The city of this site - + The country of this site - + The latitude of this site - + Angle between the true North and the North direction in this document - + The elevation of level 0 of this site - + The perimeter length of this terrain - + The volume of earth to be added to this terrain - + The volume of earth to be removed from this terrain - + An extrusion vector to use when performing boolean operations - + Remove splitters from the resulting shape - + Show solar diagram or not - + The scale of the solar diagram - + The position of the solar diagram - + The color of the solar diagram @@ -938,92 +938,92 @@ - + An optional extrusion path for this element - + The height or extrusion depth of this element. Keep 0 for automatic - + A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line - + If the nodes are visible or not - + The width of the nodes line - + The size of the node points - + The color of the nodes line - + The type of structural node - + Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes - + The length of this wall. Not used if this wall is based on an underlying object - + The width of this wall. Not used if this wall is based on a face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - + The alignment of this wall on its base object, if applicable - + The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) @@ -1433,22 +1433,22 @@ - + The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site - + A url that shows this site in a mapping website - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates @@ -1503,42 +1503,42 @@ - + Enable this to make the wall generate blocks - + The length of each block - + The height of each block - + The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks - + The size of the joints between each block - + The number of entire blocks - + The number of broken blocks @@ -1628,7 +1628,7 @@ - + The type of this object @@ -1658,27 +1658,27 @@ - + When set to 'True North' the whole geometry will be rotated to match the true north of this site - + Show compass or not - + The rotation of the Compass relative to the Site - + The position of the Compass relative to the Site placement - + Update the Declination value based on the compass rotation @@ -1836,37 +1836,37 @@ - + Create Site - + Create Structure - + Create Wall - + Width - + Height - + Error: Invalid base object - + This mesh is an invalid solid @@ -1971,32 +1971,32 @@ - + Length - + Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape - + Merge Wall - + Please select only wall objects - + Merge Walls @@ -2011,7 +2011,7 @@ - + Create Structural System @@ -2181,7 +2181,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela - + Category @@ -2231,7 +2231,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela - + Facemaker returned an error @@ -2411,58 +2411,58 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela - + There is no valid object in the selection. Site creation aborted. - + Node Tools - + Reset nodes - + Edit nodes - + Extend nodes - + Extends the nodes of this element to reach the nodes of another element - + Connect nodes - + Connects nodes of this element with the nodes of another element - + Toggle all nodes - + Toggles all structural nodes of the document on/off - + Intersection found. @@ -2518,7 +2518,7 @@ Site creation aborted. - + Wall Presets... @@ -2618,7 +2618,7 @@ Site creation aborted. - + Error: Unable to modify the base object of this wall @@ -2948,12 +2948,12 @@ Floor creation aborted. - + Center - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2961,42 +2961,42 @@ Note: You can change that in the preferences. - + Choose another Structure object: - + The chosen object is not a Structure - + The chosen object has no structural nodes - + One of these objects has more than 2 nodes - + Unable to find a suitable intersection point - + Intersection found. - + The selected wall contains no subwall to merge - + Cannot compute blocks for wall @@ -3133,6 +3133,96 @@ You can change that in the preferences. Centers the plane on the objects in the list above + + + First point of the beam + + + + + Base point of column + + + + + Next point + + + + + Structure options + + + + + Drawing mode + + + + + Beam + + + + + Column + + + + + Preset + + + + + Switch L/H + + + + + Switch L/W + + + + + Con&tinue + + + + + First point of wall + + + + + Wall options + + + + + This list shows all the MultiMaterials objects of this document. Create some to define wall types. + + + + + Alignment + + + + + Left + + + + + Right + + + + + Use sketches + + ArchMaterial @@ -3563,12 +3653,12 @@ You can change that in the preferences. Arch_MergeWalls - + Merge Walls - + Merges the selected walls, if possible @@ -3800,12 +3890,12 @@ You can change that in the preferences. Arch_Site - + Site - + Creates a site object including selected objects. @@ -3852,12 +3942,12 @@ You can change that in the preferences. Arch_Structure - + Structure - + Creates a structure object from scratch or from a selected object (sketch, wire, face or solid) diff --git a/src/Mod/Draft/Resources/translations/Draft.ts b/src/Mod/Draft/Resources/translations/Draft.ts index 1dd6773bb6..666a7ec919 100755 --- a/src/Mod/Draft/Resources/translations/Draft.ts +++ b/src/Mod/Draft/Resources/translations/Draft.ts @@ -726,12 +726,12 @@ Draft - + Slope - + Scale @@ -746,27 +746,27 @@ - + X factor - + Y factor - + Z factor - + Uniform scaling - + Working plane orientation @@ -783,12 +783,12 @@ from menu Tools -> Addon Manager - + Pick from/to points - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down @@ -859,12 +859,12 @@ from menu Tools -> Addon Manager Draft_AddConstruction - + Add to Construction group - + Adds the selected objects to the Construction group @@ -872,12 +872,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point - + Adds a point to an existing Wire or B-spline @@ -885,12 +885,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... - + Moves the selected object(s) to an existing group @@ -898,12 +898,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style - + Applies current line width and color to selected objects @@ -924,7 +924,7 @@ from menu Tools -> Addon Manager Draft_ArcTools - + Arc tools @@ -932,12 +932,12 @@ from menu Tools -> Addon Manager Draft_Arc_3Points - + Arc 3 points - + Creates an arc by 3 points @@ -945,12 +945,12 @@ from menu Tools -> Addon Manager Draft_Array - + Array - + Creates a polar or rectangular array from a selected object @@ -958,12 +958,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup - + Select a group to automatically add all Draft & Arch objects to @@ -997,7 +997,7 @@ from menu Tools -> Addon Manager Draft_BezierTools - + Bezier tools @@ -1018,12 +1018,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone - + Clones the selected object(s) @@ -1058,12 +1058,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_DelPoint - + Remove Point - + Removes a point from an existing Wire or B-spline @@ -1084,12 +1084,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Downgrade - + Downgrade - + Explodes the selected objects into simpler objects, or subtracts faces @@ -1097,12 +1097,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Draft2Sketch - + Draft to Sketch - + Convert bidirectionally between Draft and Sketch objects @@ -1110,12 +1110,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Drawing - + Drawing - + Puts the selected objects on a Drawing sheet @@ -1123,12 +1123,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit - + Edit - + Edits the active object @@ -1136,17 +1136,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Edit_Improved - + Edit Improved - + Edits the selected objects - + Select an object to edit @@ -1167,12 +1167,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Facebinder - + Facebinder - + Creates a facebinder object from selected face(s) @@ -1193,12 +1193,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_FlipDimension - + Flip Dimension - + Flip the normal direction of a dimension @@ -1206,12 +1206,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Heal - + Heal - + Heal faulty Draft objects saved from an earlier FreeCAD version @@ -1219,12 +1219,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Join - + Join - + Joins two wires together @@ -1232,12 +1232,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Label - + Label - + Creates a label, optionally attached to a selected object or element @@ -1258,12 +1258,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Mirror - + Mirror - + Mirrors the selected objects along a line defined by two points @@ -1271,12 +1271,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Move - + Move - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain @@ -1284,12 +1284,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy @@ -1297,12 +1297,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PathArray - + PathArray - + Creates copies of a selected object along a selected path. @@ -1310,12 +1310,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Point - + Point - + Creates a point object @@ -1323,12 +1323,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_PointArray - + PointArray - + Creates copies of a selected object on the position of points. @@ -1362,12 +1362,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Rotate - + Rotate - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy @@ -1375,12 +1375,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Scale - + Scale - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy @@ -1388,12 +1388,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SelectGroup - + Select group - + Selects all objects with the same parents as this group @@ -1414,12 +1414,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane - + Create Working Plane Proxy @@ -1427,12 +1427,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Shape2DView - + Shape 2D view - + Creates Shape 2D views of selected objects @@ -1453,12 +1453,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ShowSnapBar - + Show Snap Bar - + Shows Draft snap toolbar @@ -1466,12 +1466,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Slope - + Set Slope - + Sets the slope of a selected Line or Wire @@ -1479,12 +1479,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Angle - + Angles - + Snaps to 45 and 90 degrees points on arcs and circles @@ -1492,12 +1492,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Center - + Center - + Snaps to center of circles and arcs @@ -1505,12 +1505,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Dimensions - + Dimensions - + Shows temporary dimensions when snapping to Arch objects @@ -1518,12 +1518,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Endpoint - + Endpoint - + Snaps to endpoints of edges @@ -1531,12 +1531,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Extension - + Extension - + Snaps to extension of edges @@ -1544,12 +1544,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Grid - + Grid - + Snaps to grid points @@ -1557,12 +1557,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Intersection - + Intersection - + Snaps to edges intersections @@ -1570,17 +1570,17 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Lock - + Toggle On/Off - + Activates/deactivates all snap tools at once - + Lock @@ -1588,12 +1588,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Midpoint - + Midpoint - + Snaps to midpoints of edges @@ -1601,12 +1601,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Near - + Nearest - + Snaps to nearest point on edges @@ -1614,12 +1614,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Ortho - + Ortho - + Snaps to orthogonal and 45 degrees directions @@ -1627,12 +1627,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Parallel - + Parallel - + Snaps to parallel directions of edges @@ -1640,12 +1640,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Perpendicular - + Perpendicular - + Snaps to perpendicular points on edges @@ -1653,12 +1653,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_Special - + Special - + Snaps to special locations of objects @@ -1666,12 +1666,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Snap_WorkingPlane - + Working Plane - + Restricts the snapped point to the current working plane @@ -1679,12 +1679,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Split - + Split - + Splits a wire into two wires @@ -1692,12 +1692,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Stretch - + Stretch - + Stretches the selected objects @@ -1718,12 +1718,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. - + Toggle Construction Mode @@ -1731,12 +1731,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleContinueMode - + Toggle Continue Mode - + Toggles the Continue Mode for next commands. @@ -1744,12 +1744,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleDisplayMode - + Toggle display mode - + Swaps display mode of selected objects between wireframe and flatlines @@ -1757,22 +1757,22 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_ToggleGrid - + Toggle Grid - + Toggles the Draft grid on/off - + Grid - + Toggles the Draft grid On/Off @@ -1780,12 +1780,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Trimex - + Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts @@ -1806,12 +1806,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_Upgrade - + Upgrade - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces @@ -1819,12 +1819,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_VisGroup - + VisGroup - + Adds a VisGroup @@ -1845,12 +1845,12 @@ Click and drag to define control points. CTRL to snap, SHIFT to constrain Draft_WireToBSpline - + Wire to B-spline - + Converts between Wire and B-spline @@ -2897,7 +2897,7 @@ Values with differences below this value will be treated as same. This value wil Workbench - + Draft Snap @@ -2955,297 +2955,297 @@ Values with differences below this value will be treated as same. This value wil - + Toggle construction mode - + Current line color - + Current face color - + Current line width - + Current font size - + Apply to selected objects - + Autogroup off - + active command: - + None - + Active Draft command - + X coordinate of next point - + X - + Y - + Z - + Y coordinate of next point - + Z coordinate of next point - + Enter point - + Enter a new point with the given coordinates - + Length - + Angle - + Length of current segment - + Angle of current segment - + Radius - + Radius of Circle - + If checked, command will not finish until you press the command button again - + If checked, an OCC-style offset will be performed instead of the classic offset - + &OCC-style offset - + Add points to the current object - + Remove points from the current object - + Make Bezier node sharp - + Make Bezier node tangent - + Make Bezier node symmetric - + Sides - + Number of sides - + Offset - + XY (top) - + Select XY plane - + XZ (front) - + Select XZ plane - + YZ (side) - + Select YZ plane - + View - + Select plane perpendicular to the current view - + Auto - + Do not project points to a drawing plane - + Text string to draw - + String - + Height of text - + Height - + Intercharacter spacing - + Tracking - + Full path to font file: - + Open a FileChooser for font file - + Grid spacing - + The spacing between the grid lines - + Main line every - + The number of lines between main lines - + Center plane on view - + Select Plane @@ -3260,127 +3260,127 @@ Values with differences below this value will be treated as same. This value wil - + Circle - + Center X - + Arc - + Point - + Label - + Distance - + Trim - + Pick Object - + Edit - + Global X - + Global Y - + Global Z - + Local X - + Local Y - + Local Z - + Invalid Size value. Using 200.0. - + Invalid Tracking value. Using 0. - + Please enter a text string. - + Select a Font file - + Please enter a font file. - + Autogroup: - + Faces - + Remove - + Add - + Facebinder elements @@ -3501,79 +3501,79 @@ Values with differences below this value will be treated as same. This value wil - + Copy - + Move - + Change Style - + Rotate - + Cannot offset this object type - + Stretch - + Upgrade - + Downgrade - + Selection is not a Knot - + Convert to Sketch - + Convert to Draft - + Convert - + Array - + Create Point - + Mirror @@ -3756,17 +3756,17 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Relative - + Continue - + Close @@ -3811,7 +3811,7 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Select edge @@ -3826,7 +3826,7 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Wipe @@ -3841,82 +3841,82 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Check this to lock the current angle - + Coordinates relative to last point or absolute - + Filled - + Check this if the object should appear as filled, otherwise it will appear as wireframe - + Finish - + Finishes the current drawing or editing operation - + &Undo (CTRL+Z) - + Undo the last segment - + Finishes and closes the current line - + Wipes the existing segments of this line and starts again from the last point - + Set WP - + Reorients the working plane on the last segment - + Selects an existing edge to be measured by this dimension - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - + options - + Default @@ -4036,248 +4036,248 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Select an object to move - + Pick start point: - + Pick end point: - + Select an object to rotate - + Pick rotation center: - + Pick base angle: - + Pick rotation angle: - + Select an object to offset - + Offset only works on one object at a time - + Sorry, offset of Bezier curves is currently still not supported - + Pick distance: - + Select an object to stretch - + Pick first point of selection rectangle: - + Pick opposite point of selection rectangle: - + Pick start point of displacement: - + Pick end point of displacement: - + Turning one Rectangle into a Wire - + Select an object to join - + Join - + Select an object to split - + Select an object to upgrade - + Select object(s) to trim/extend - + Unable to trim these objects, only Draft wires and arcs are supported - + Unable to trim these objects, too many wires - + These objects don't intersect - + Too many intersection points - + Select an object to scale - + Pick base point: - + Pick reference distance from base point: - + Pick new distance from base point: - + Select an object to project - + This object type is not editable - + Please select only one object - + Select a Draft object to edit - + Active object must have more than two points/nodes - + Endpoint of BezCurve can't be smoothed - + Select an object to convert - + Select an object to array - + Please select base and path objects - + Please select base and pointlist objects - + Select an object to clone - + Select face(s) on existing object(s) - + Select an object to mirror - + Pick start point of mirror line: - + Pick end point of mirror line: - + This tool only works with Wires and Lines - + Pick target point: - + Pick endpoint of leader line: - + Pick text position: @@ -4297,17 +4297,17 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Toggle radius and angles arc editing - + Modify subelements - + If checked, subelements will be modified instead of entire objects @@ -4328,24 +4328,44 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Some subelements could not be moved. - + Scale - + Some subelements could not be scaled. - + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + + Top + + + + + Front + + + + + Side + + + + + Current working plane + + diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem.ts b/src/Mod/Fem/Gui/Resources/translations/Fem.ts index 13e2349a56..307ae55a94 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem.ts @@ -264,11 +264,6 @@ Creates a FEM equation for fluxsolver - - - Creates a FEM equation for fluxsolver - - FEM_EquationHeat @@ -277,6 +272,11 @@ Fluxsolver heat + + + Fluxsolver heat + + FEM_FEMMesh2Mesh @@ -290,11 +290,6 @@ Convert the surface of a FEM mesh to a mesh - - - Convert the surface of a FEM mesh to a mesh - - FEM_MaterialFluid @@ -303,6 +298,11 @@ Material for fluid + + + Material for fluid + + FEM material for Fluid @@ -326,11 +326,6 @@ Creates a nonlinear mechanical material - - - Creates a nonlinear mechanical material - - FEM_MaterialSolid @@ -339,6 +334,11 @@ Material for solid + + + Material for solid + + FEM material for solid @@ -378,11 +378,6 @@ Display FEM mesh info - - - Display FEM mesh info - - FEM_MeshGmshFromShape @@ -425,6 +420,14 @@ + + FEM_MeshNetgenFromShape + + + FEM mesh from shape by Netgen + + + FEM_MeshRegion @@ -477,13 +480,31 @@ - - Solver CalculiX (experimental) + + Creates a FEM solver CalculiX (experimental) + + + + + FEM_SolverCalculix + + + Solver CalculiX Standard - - Creates a FEM solver CalculiX (experimental) + + Creates a standard FEM solver CalculiX with ccx tools + + + + + Solver CalculiX + + + + + Creates a FEM solver CalculiX @@ -499,17 +520,20 @@ Changes solver attributes and runs the calculations for the selected solver - - - Solver job control - - Changes solver attributes and runs the calculations for the selected solver + + FEM_SolverElmer + + + Solver Elmer + + + FEM_SolverRun @@ -615,35 +639,12 @@ Remove - - - Add - - Remove - - FEM_SolverCalculix - - - Creates a standard FEM solver CalculiX with ccx tools - - - - - Solver CalculiX - - - - - Creates a FEM solver CalculiX - - - FEM_MeshFromShape diff --git a/src/Mod/Path/Gui/Resources/translations/Path.ts b/src/Mod/Path/Gui/Resources/translations/Path.ts index 0e5cda2f61..ca5ca1936a 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path.ts @@ -98,6 +98,11 @@ The path to be copied + + + The base geometry of this toolpath + + The tool controller that will be used to calculate the path @@ -198,19 +203,19 @@ Incremental Drill depth before retracting to clear chips + + + Diameters of the holes + + Enable pecking - - Height to clear top of material - - - - - Diameters of the holes + + Enable dwell @@ -219,13 +224,13 @@ - - Incremental Drill depth before retracting to clear chips + + Enable dwell - - Enable pecking + + Calculate the tip length and subtract from final depth @@ -234,8 +239,8 @@ - - Enable dwell + + The height where feed starts and height during retract tool when path is finished @@ -254,18 +259,18 @@ - - Orientation plane of CNC path + + Profile the outline - - Shape to use for calculating Boundary + + Profile round holes - - Profile holes as well as the outline + + The base object this collision refers to @@ -309,13 +314,13 @@ - - Maximum distance before a miter join is truncated + + Percent of cutter diameter to step over on each pass - - Extra offset to apply to the operation. Direction is operation dependent. + + Angle of the zigzag pattern @@ -329,8 +334,8 @@ - - Angle of the zigzag pattern + + Add Optional or Mandatory Stop to the program @@ -374,23 +379,18 @@ - - Direction of spindle rotation + + Rapid rate for vertical moves in Z - - Feed rate for vertical moves in Z + + Rapid rate for horizontal moves - - Feed rate for horizontal moves - - - - - The base geometry of this toolpath + + Shape to use for calculating Boundary @@ -587,18 +587,18 @@ - - %s is not a Base Model object of the job %s + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - - Base shape %s already in the list + + Cutting Edge Angle (%.2f) results in negative tool tip length - - Ignoring vertex + + No parent job found for operation. @@ -682,33 +682,18 @@ - - Project Setup + + %s is not a Base Model object of the job %s - - Path Modification + + Base shape %s already in the list - - Helpful Tools - - - - - &Path - - - - - Path Dressup - - - - - Supplemental Commands + + Ignoring vertex @@ -749,6 +734,14 @@ + + PathAdaptive + + + Adaptive + + + PathAreaOp @@ -762,16 +755,54 @@ - - job %s has no Base. + + no job for op %s found. - PathAdaptive + PathCustom - - Adaptive + + The gcode to be inserted + + + + + The tool controller that will be used to calculate the path + + + + + The gcode to be inserted + + + + + The tool controller that will be used to calculate the path + + + + + PathDeburr + + + The desired width of the chamfer + + + + + The additional depth of the tool path + + + + + The desired width of the chamfer + + + + + Deburr @@ -782,11 +813,6 @@ Edit HoldingTags Dress-up - - - Edit HoldingTags Dress-up - - The base path to modify @@ -846,11 +872,6 @@ Creates a Path Drilling object from a features of a base object - - - Drilling - - PathEngrave @@ -870,31 +891,8 @@ - - PathDeburr - - - Deburr - - - - - The desired width of the chamfer - - - - - The additional depth of the tool path - - - PathFace - - - Face - - Generating toolpath with libarea offsets. @@ -906,6 +904,11 @@ Pick Start Point + + + Face + + PathGeom @@ -960,24 +963,14 @@ The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) - - - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) - - Start cutting from the inside or outside - - Creates a Path Helix object from a features of a base object - - - - - The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) + + Radius increment (must be smaller than tool diameter) @@ -986,8 +979,8 @@ - - Radius increment (must be smaller than tool diameter) + + The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -1018,11 +1011,26 @@ Unsupported stock type %s (%d) + + + Select the Post Processor + + Stock not from Base bound box! + + + Stock not a box! + + + + + Stock not a cylinder! + + Solid object to be used as stock. @@ -1039,8 +1047,8 @@ - - Unsupported stock type %s (%d) + + Select the Post Processor @@ -1049,8 +1057,8 @@ - - Select the Post Processor + + Arguments for the Post Processor (specific to the script) @@ -1059,8 +1067,8 @@ - - An optional description for this job + + For computing Paths; smaller increases accuracy, but slows down computation @@ -1108,11 +1116,6 @@ 2D - - - Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - - Select Output File @@ -1141,6 +1144,11 @@ Holds the max Z value of Stock + + + Holds the min Z value of Stock + + Make False, to prevent operation from generating code @@ -1177,8 +1185,8 @@ - - Holds the max Z value of Stock + + Starting Depth internal use only for derived values @@ -1192,8 +1200,8 @@ - - Starting Depth internal use only for derived values + + An optional comment for this Operation @@ -1211,11 +1219,6 @@ Make True, if specifying a Start Point - - - The tool controller that will be used to calculate the path - - Base Geometry @@ -1237,6 +1240,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths + + + Incremental Step Down of Tool + + PathPocket @@ -1300,31 +1308,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Pocket object from a face or faces - - - Vertical faces do not form a loop - ignoring - - - - - Pocket does not support shape %s.%s - - - - - Adaptive clearing and profiling - - - - - Pass Extension - - - - - The distance the facing operation will extend beyond the boundary shape. - - Generating toolpath with libarea offsets. @@ -1339,11 +1322,6 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocketShape - - - Reverse direction of pocket operation. - - Uses the outline of the base geometry. @@ -1388,13 +1366,13 @@ If it is necessary to set the FinalDepth manually please select a different oper - - Face Profile + + The tool number in use - - Profile based on face or faces + + Face Profile @@ -1417,11 +1395,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Profile based on face or faces - - - The tool number in use - - The current tool in use @@ -1596,6 +1569,36 @@ If it is necessary to set the FinalDepth manually please select a different oper Default speed for vertical rapid moves. + + + Default speed for horizontal rapid moves. + + + + + Default speed for vertical rapid moves. + + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + + Expression set for the SafeHeight of new operations. + + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + + Expression set for the ClearanceHeight of new operations. + + PathStock @@ -1682,11 +1685,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Error updating TC: %s - - - Error updating TC: %s - - PathToolLibraryManager @@ -1773,17 +1771,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Please select one path object - - - - - - Please select a Path object - - Dress-up @@ -1794,6 +1781,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Dess-up object from a selected path + + + Please select one path object + + + Path_DressupAxisMap @@ -1890,36 +1883,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up - - - Edit Dogbone Dress-up - - - - - Dogbone Dress-up - - - - - Creates a Dogbone Dress-up object from a selected path - - - - - Please select one path object - - - - - The selected object is not a path - - - - - Create Dogbone Dress-up - - Path_DressupDragKnife @@ -1973,16 +1936,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The selected object is not a path - - - Please select a Path object - - - - - Create Dress-up - - Path_DressupLeadInOut @@ -2002,8 +1955,13 @@ If it is necessary to set the FinalDepth manually please select a different oper - - The Style of LeadIn the Path + + LeadInOut Dressup + + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path @@ -2039,9 +1997,44 @@ If it is necessary to set the FinalDepth manually please select a different oper Angle of ramp. + + + The base path to modify + + + + + Angle of ramp. + + + + + RampEntry Dress-up + + + + + Creates a Ramp Entry Dress-up object from a selected path + + Path_DressupTag + + + Height of tags. + + + + + Angle of tag plunge and ascent. + + + + + Radius of the fillet for the tag. + + Tag Dress-up @@ -2114,9 +2107,8 @@ If it is necessary to set the FinalDepth manually please select a different oper - - Please select one path object - + + Please select one path object @@ -2261,6 +2253,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + It appears the machine limits haven't been set. Not able to check path extents. + + + Check the Path project for common errors @@ -2296,17 +2294,6 @@ If it is necessary to set the FinalDepth manually please select a different oper A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No issues detected, {} has passed basic sanity check. - - - - - It appears the machine limits haven't been set. Not able to check path extents. - - - Path_SelectLoop @@ -2320,16 +2307,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Complete loop selection from two edges - - - Finish Selecting Loop - - - - - Complete loop selection from two edges - - Path_SetupSheet @@ -2338,20 +2315,9 @@ If it is necessary to set the FinalDepth manually please select a different oper Edit SetupSheet - - - Edit SetupSheet - - Path_SimpleCopy - - - Please select exactly one path object - - - Simple Copy @@ -2362,6 +2328,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a non-parametric copy of another path + + + Please select exactly one path object + + Simple Copy @@ -2377,6 +2348,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select exactly one path object + + + Please select exactly one path object + + + Path_Simulator @@ -2464,13 +2441,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController - - Tool Number to Load + + Add Tool Controller to the Job - - Add Tool Controller to the Job + + Add Tool Controller @@ -2483,6 +2460,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller + + + Tool Number to Load + + Path_ToolTable @@ -2532,66 +2514,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable JSON (*.json) - - - Tooltable XML (*.xml) - - - - - HeeksCAD tooltable (*.tooltable) - - - - - LinuxCNC tooltable (*.tbl) - - - - - Open tooltable - - - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - - - Save tooltable - - - - - Tooltable JSON (*.json) - - - - - Tooltable XML (*.xml) - - - - - HeeksCAD tooltable (*.tooltable) - - - - - LinuxCNC tooltable (*.tbl) - - - - - Open tooltable - - - - - Save tooltable - - Tooltable editor @@ -2797,6 +2719,16 @@ If it is necessary to set the FinalDepth manually please select a different oper mm + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + + + + + Tooltable XML (*.xml) + + Object not found @@ -2807,25 +2739,57 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property + + + HeeksCAD tooltable (*.tooltable) + + + + + LinuxCNC tooltable (*.tbl) + + + + + Save tooltable + + + + + Tooltable JSON (*.json) + + + + + Tooltable XML (*.xml) + + + + + HeeksCAD tooltable (*.tooltable) + + + + + LinuxCNC tooltable (*.tbl) + + + + + Open tooltable + + + + + Save tooltable + + Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) - - PathCustom - - - The gcode to be inserted - - - - - The tool controller that will be used to calculate the path - - - PathDressup_Dogbone