diff --git a/src/Gui/Language/FreeCAD.ts b/src/Gui/Language/FreeCAD.ts index 1fc7862feb..abb88d5031 100644 --- a/src/Gui/Language/FreeCAD.ts +++ b/src/Gui/Language/FreeCAD.ts @@ -1965,6 +1965,94 @@ Specify another directory, please. Using Undo/Redo on documents + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3551,6 +3639,10 @@ How do you want to proceed? Save value + + Clear list + + Gui::ProgressBar @@ -3706,17 +3798,6 @@ Do you want to exit without saving your data? - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_af.ts b/src/Gui/Language/FreeCAD_af.ts index 330e8cba0d..60d3927b07 100644 --- a/src/Gui/Language/FreeCAD_af.ts +++ b/src/Gui/Language/FreeCAD_af.ts @@ -1978,6 +1978,94 @@ Spesifiseer asseblief 'n ander gids. Using Undo/Redo on documents Gebruik van ontdoen/herdoen in dokumente + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + License URL + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3580,6 +3668,10 @@ In die linkeraansig is %1 punte gekies, in die regteraansig is %2 punte gekies.< Save value Save value + + Clear list + + Gui::ProgressBar @@ -3736,17 +3828,6 @@ Wil jy afsluit sonder om jou data te stoor? Verwyder opmerking - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_cs.ts b/src/Gui/Language/FreeCAD_cs.ts index 9513428e3c..9615fe769c 100644 --- a/src/Gui/Language/FreeCAD_cs.ts +++ b/src/Gui/Language/FreeCAD_cs.ts @@ -1975,6 +1975,94 @@ Specify another directory, please. Using Undo/Redo on documents Pužití funkce zpět/znovu na dokumentech + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + License URL + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3577,6 +3665,10 @@ V pravém pohledu jsou %2 body vybrány. Save value Save value + + Clear list + + Gui::ProgressBar @@ -3733,17 +3825,6 @@ Chcete průvodce ukončit bez uložení dat? Nekomentované - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_de.ts b/src/Gui/Language/FreeCAD_de.ts index 062148bd0a..b0224ec5e9 100644 --- a/src/Gui/Language/FreeCAD_de.ts +++ b/src/Gui/Language/FreeCAD_de.ts @@ -2078,6 +2078,94 @@ Wählen Sie bitte ein anderes Verzeichnis aus. Using Undo/Redo on documents Rückgängigmachen/Wiederholen in Dokumenten verwenden + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3759,6 +3847,10 @@ How do you want to proceed? Save value + + Clear list + + Gui::ProgressBar @@ -3930,17 +4022,6 @@ Wollen Sie sie beenden, ohne Ihre Daten zu speichern? Löschen - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_es-ES.ts b/src/Gui/Language/FreeCAD_es-ES.ts index 8f033b97b9..17a5a24b3c 100644 --- a/src/Gui/Language/FreeCAD_es-ES.ts +++ b/src/Gui/Language/FreeCAD_es-ES.ts @@ -1979,6 +1979,94 @@ Especifique otro directorio, por favor. Using Undo/Redo on documents Usando Deshacer/Rehacer en los documentos + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + URL de la licencia + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3578,6 +3666,10 @@ How do you want to proceed? Save value Guardar valor + + Clear list + + Gui::ProgressBar @@ -3734,17 +3826,6 @@ Desea salir sin guardar sus datos? Quitar comentario - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_fi.ts b/src/Gui/Language/FreeCAD_fi.ts index 6db8fdd929..8cf9cc0d09 100644 --- a/src/Gui/Language/FreeCAD_fi.ts +++ b/src/Gui/Language/FreeCAD_fi.ts @@ -1974,6 +1974,94 @@ Specify another directory, please. Using Undo/Redo on documents "Pura"/"Tee uudelleen" komentojen käyttö asiakirjoissa + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + License URL + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3574,6 +3662,10 @@ How do you want to proceed? Save value Save value + + Clear list + + Gui::ProgressBar @@ -3729,17 +3821,6 @@ Do you want to exit without saving your data? Poista kommentti - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_fr.ts b/src/Gui/Language/FreeCAD_fr.ts index 958cf24dd7..c232484699 100644 --- a/src/Gui/Language/FreeCAD_fr.ts +++ b/src/Gui/Language/FreeCAD_fr.ts @@ -1978,6 +1978,94 @@ Veuillez spécifier un autre répertoire. Using Undo/Redo on documents Utiliser Annuler / Rétablir sur les documents + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + URL de licence + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3577,6 +3665,10 @@ How do you want to proceed? Save value Enregistrer la valeur + + Clear list + + Gui::ProgressBar @@ -3733,17 +3825,6 @@ Voulez vous quitter sans sauvegarder vos données? Décommenter - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_hr.ts b/src/Gui/Language/FreeCAD_hr.ts index c226d30a4a..b13df0796c 100644 --- a/src/Gui/Language/FreeCAD_hr.ts +++ b/src/Gui/Language/FreeCAD_hr.ts @@ -1975,6 +1975,94 @@ Specify another directory, please. Using Undo/Redo on documents Koristi Undo/Redo na dokumentima + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + License URL + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3574,6 +3662,10 @@ Kako želite nastaviti? Save value Save value + + Clear list + + Gui::ProgressBar @@ -3729,17 +3821,6 @@ Do you want to exit without saving your data? Bez komentara - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_hu.ts b/src/Gui/Language/FreeCAD_hu.ts index 7838ff577b..309016d379 100644 --- a/src/Gui/Language/FreeCAD_hu.ts +++ b/src/Gui/Language/FreeCAD_hu.ts @@ -1979,6 +1979,94 @@ Kérem válasszon másik könyvtárat. Using Undo/Redo on documents Visszalépés / Újra létrehozás használata a dokumentumokhoz + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + License URL + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3582,6 +3670,10 @@ a jobboldali nézetben %2 pont lett jelölve. Save value Save value + + Clear list + + Gui::ProgressBar @@ -3738,17 +3830,6 @@ Ki szeretne lépni az adatok mentése nélkül? Kijelölés törlés - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_it.ts b/src/Gui/Language/FreeCAD_it.ts index 17e0e9455e..e940600a02 100644 --- a/src/Gui/Language/FreeCAD_it.ts +++ b/src/Gui/Language/FreeCAD_it.ts @@ -1979,6 +1979,94 @@ Specificare un'altra cartella. Using Undo/Redo on documents Utilizzo di Annulla/Ripeti sui documenti + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + Indirizzo licenza + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3580,6 +3668,10 @@ How do you want to proceed? Save value Salva valore + + Clear list + + Gui::ProgressBar @@ -3736,17 +3828,6 @@ Vuoi uscire senza salvare i tuoi dati? Rimuovi commento - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_ja.ts b/src/Gui/Language/FreeCAD_ja.ts index b0dee9cd8b..d72ca6d7da 100644 --- a/src/Gui/Language/FreeCAD_ja.ts +++ b/src/Gui/Language/FreeCAD_ja.ts @@ -1977,6 +1977,94 @@ Specify another directory, please. Using Undo/Redo on documents ドキュメントで元に戻す/やり直しの使用 + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + ライセンス URL + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3576,6 +3664,10 @@ How do you want to proceed? Save value Save value + + Clear list + + Gui::ProgressBar @@ -3731,17 +3823,6 @@ Do you want to exit without saving your data? コメントを解除 - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_nl.ts b/src/Gui/Language/FreeCAD_nl.ts index a5bdb1a48b..77421e177c 100644 --- a/src/Gui/Language/FreeCAD_nl.ts +++ b/src/Gui/Language/FreeCAD_nl.ts @@ -1976,6 +1976,94 @@ Kies een andere map, alstublieft. Using Undo/Redo on documents Gebruik undo/redo op documenten + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + License URL + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3575,6 +3663,10 @@ How do you want to proceed? Save value Save value + + Clear list + + Gui::ProgressBar @@ -3730,17 +3822,6 @@ Do you want to exit without saving your data? Verwijder commentaar - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_no.ts b/src/Gui/Language/FreeCAD_no.ts index 1457c4da54..997bc78d22 100644 --- a/src/Gui/Language/FreeCAD_no.ts +++ b/src/Gui/Language/FreeCAD_no.ts @@ -1977,6 +1977,94 @@ Vennligst angi en annen mappe. Using Undo/Redo on documents Using Undo/Redo on documents + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + License URL + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3577,6 +3665,10 @@ How do you want to proceed? Save value Save value + + Clear list + + Gui::ProgressBar @@ -3733,17 +3825,6 @@ Do you want to exit without saving your data? Avkommentér - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_pl.ts b/src/Gui/Language/FreeCAD_pl.ts index 6efdc9711d..646d6b7321 100644 --- a/src/Gui/Language/FreeCAD_pl.ts +++ b/src/Gui/Language/FreeCAD_pl.ts @@ -1975,6 +1975,94 @@ Specify another directory, please. Using Undo/Redo on documents Użyj Cofnij/Ponów w dokumentach + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + License URL + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3574,6 +3662,10 @@ How do you want to proceed? Save value Save value + + Clear list + + Gui::ProgressBar @@ -3729,17 +3821,6 @@ Do you want to exit without saving your data? Usuń komentarz - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_pt-BR.ts b/src/Gui/Language/FreeCAD_pt-BR.ts index ec80c9adae..55f331ad6f 100644 --- a/src/Gui/Language/FreeCAD_pt-BR.ts +++ b/src/Gui/Language/FreeCAD_pt-BR.ts @@ -1977,6 +1977,94 @@ Por favor especifique outro diretório. Using Undo/Redo on documents Usar Desfazer/Refazer em documentos + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + URL da licença + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3576,6 +3664,10 @@ Você deseja continuar? Save value Salvar o valor + + Clear list + + Gui::ProgressBar @@ -3731,17 +3823,6 @@ Do you want to exit without saving your data? Descomentar - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_pt-PT.ts b/src/Gui/Language/FreeCAD_pt-PT.ts index 26eea1fd2c..7ae878a818 100644 --- a/src/Gui/Language/FreeCAD_pt-PT.ts +++ b/src/Gui/Language/FreeCAD_pt-PT.ts @@ -1975,6 +1975,94 @@ Por favor, indique outra pasta. Using Undo/Redo on documents Usar Desfazer/Refazer em documentos + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + URL da licença + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3577,6 +3665,10 @@ How do you want to proceed? Save value Save value + + Clear list + + Gui::ProgressBar @@ -3733,17 +3825,6 @@ Deseja sair sem guardar os seus dados? Uncomment - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_ro.ts b/src/Gui/Language/FreeCAD_ro.ts index 017ec24a43..258eb66557 100644 --- a/src/Gui/Language/FreeCAD_ro.ts +++ b/src/Gui/Language/FreeCAD_ro.ts @@ -1978,6 +1978,94 @@ Specify another directory, please. Using Undo/Redo on documents Folosire Undo/Redo in documente + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + License URL + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3578,6 +3666,10 @@ Cum doresti sa continuam? Save value Save value + + Clear list + + Gui::ProgressBar @@ -3734,17 +3826,6 @@ Doriți să ieşiți fără a salva datele dumneavoastră? Decomentaţi - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_ru.ts b/src/Gui/Language/FreeCAD_ru.ts index c4e7f56815..7bbbf867a9 100644 --- a/src/Gui/Language/FreeCAD_ru.ts +++ b/src/Gui/Language/FreeCAD_ru.ts @@ -1976,6 +1976,94 @@ Specify another directory, please. Using Undo/Redo on documents Использование Undo/Redo на документах + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + URL-адрес лицензии + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3574,6 +3662,10 @@ How do you want to proceed? Save value Save value + + Clear list + + Gui::ProgressBar @@ -3729,17 +3821,6 @@ Do you want to exit without saving your data? Раскомментировать - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_sk.ts b/src/Gui/Language/FreeCAD_sk.ts index 634f8868da..3ce594dcaf 100644 --- a/src/Gui/Language/FreeCAD_sk.ts +++ b/src/Gui/Language/FreeCAD_sk.ts @@ -1980,6 +1980,94 @@ Určite iný adresár. Using Undo/Redo on documents Použiť Vrátiť/Nazad v dokumente + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + License URL + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3581,6 +3669,10 @@ How do you want to proceed? Save value Save value + + Clear list + + Gui::ProgressBar @@ -3737,17 +3829,6 @@ Chcete skončiť bez uloženia vašich údajov? Bez komentára - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_sv-SE.ts b/src/Gui/Language/FreeCAD_sv-SE.ts index 047f3f6e36..09026520c1 100644 --- a/src/Gui/Language/FreeCAD_sv-SE.ts +++ b/src/Gui/Language/FreeCAD_sv-SE.ts @@ -1980,6 +1980,94 @@ Ange en annan katalog. Using Undo/Redo on documents Använder Ångra / Gör om på dokument + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + Licens-URL + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3582,6 +3670,10 @@ Hur vill du fortsätta? Save value Save value + + Clear list + + Gui::ProgressBar @@ -3738,17 +3830,6 @@ Vill du avsluta utan att spara din data? Bortkommentera - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_tr.ts b/src/Gui/Language/FreeCAD_tr.ts index cd674c2c8d..030ccdd0e4 100644 --- a/src/Gui/Language/FreeCAD_tr.ts +++ b/src/Gui/Language/FreeCAD_tr.ts @@ -1978,6 +1978,94 @@ Lütfen başka bir dizin belirtin. Using Undo/Redo on documents Dökümanlarda Geri Al/Yeniden Yap kullanılıyor + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + License URL + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3577,6 +3665,10 @@ sağ görünümde %2 nokta seçili. Save value Save value + + Clear list + + Gui::ProgressBar @@ -3732,17 +3824,6 @@ Do you want to exit without saving your data? Yorumu Geri al - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_uk.ts b/src/Gui/Language/FreeCAD_uk.ts index a9cf81cbf2..d11894b0a4 100644 --- a/src/Gui/Language/FreeCAD_uk.ts +++ b/src/Gui/Language/FreeCAD_uk.ts @@ -1979,6 +1979,94 @@ Specify another directory, please. Using Undo/Redo on documents Використання скасування/повторення дій у документах + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + License URL + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3579,6 +3667,10 @@ How do you want to proceed? Save value Save value + + Clear list + + Gui::ProgressBar @@ -3735,17 +3827,6 @@ Do you want to exit without saving your data? Розкоментувати - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_zh-CN.ts b/src/Gui/Language/FreeCAD_zh-CN.ts index fe768b8bf1..08b653a584 100644 --- a/src/Gui/Language/FreeCAD_zh-CN.ts +++ b/src/Gui/Language/FreeCAD_zh-CN.ts @@ -1976,6 +1976,94 @@ Specify another directory, please. Using Undo/Redo on documents 在文档上使用撤消/重做 + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + License URL + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3574,6 +3662,10 @@ How do you want to proceed? Save value Save value + + Clear list + + Gui::ProgressBar @@ -3730,17 +3822,6 @@ Do you want to exit without saving your data? 取消注释 - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Gui/Language/FreeCAD_zh-TW.ts b/src/Gui/Language/FreeCAD_zh-TW.ts index 2d6a4eb729..f1268598f7 100644 --- a/src/Gui/Language/FreeCAD_zh-TW.ts +++ b/src/Gui/Language/FreeCAD_zh-TW.ts @@ -1973,6 +1973,94 @@ Specify another directory, please. Using Undo/Redo on documents 使用復元/重做於此檔案 + + Authoring and License + + + + Author name + + + + <html><head/><body><p>The name to use on document creation.</p><p>Keep blank for anonymous.</p><p>You can also use the form:</p><p>John Doe &lt;john@doe.com&gt;</p></body></html> + + + + If this is checked, the "Last modified by" field will be set when saving the file + + + + Set on save + + + + Company + + + + The defautl company to use for new files + + + + Default license + + + + The default license for new documents + + + + All rights reserved + + + + CreativeCommons Attribution + + + + CreativeCommons Attribution-ShareAlike + + + + CreativeCommons Attribution-NoDerivatives + + + + CreativeCommons Attribution-NonCommercial + + + + CreativeCommons Attribution-NonCommercial-ShareAlike + + + + CreativeCommons Attribution-NonCommercial-NoDerivatives + + + + Public Domain + + + + FreeArt + + + + Other + + + + License URL + 版權URL + + + An URL where the user can find more details about the license + + + + http://en.wikipedia.org/wiki/All_rights_reserved + + Gui::Dialog::DlgSettingsEditorImp @@ -3569,6 +3657,10 @@ How do you want to proceed? Save value 儲存數值 + + Clear list + + Gui::ProgressBar @@ -3725,17 +3817,6 @@ Do you want to exit without saving your data? 取消註釋 - - Gui::QuantitySpinBox - - Maximum reached - - - - Minimum reached - - - Gui::RecentFilesAction diff --git a/src/Mod/Arch/Resources/translations/Arch.ts b/src/Mod/Arch/Resources/translations/Arch.ts index 5d5b9fd013..2d97c9be1a 100644 --- a/src/Mod/Arch/Resources/translations/Arch.ts +++ b/src/Mod/Arch/Resources/translations/Arch.ts @@ -3,7 +3,7 @@ Arch - + Components @@ -43,12 +43,12 @@ - + Remove - + Add @@ -63,7 +63,7 @@ - + Angle @@ -168,7 +168,7 @@ - + Roof @@ -308,57 +308,57 @@ - + Create Window - + the components of this window - + Edit - + Create/update component - + Base 2D object - + Wires - + Create new component - + Name - + Type - + Thickness - + Z offset @@ -598,7 +598,7 @@ - + Preset @@ -678,38 +678,38 @@ - + Pick a face on an existing object or select a preset - + Window options - + The depth of the hole that this window makes in its host object. Keep 0 for automatic. - + The width of this window (for preset windows only) - + The height of this window (for preset windows only) - + The normal direction of this window - + Unable to create component @@ -847,7 +847,7 @@ - + Cutting @@ -916,12 +916,6 @@ The url of the product page of this equipment - - - There is no more cross point. - - - Create Panel @@ -948,37 +942,7 @@ - - The angles of each slope. - - - - - The horizontal lenght projection of each crawling. - - - - - The pane Id of relative profil. - - - - - The thickness of the roof pane. - - - - - The Overhang of the roof pane. - - - - - The calculated height of the roof pane list. - - - - + Parameters of the profiles of the roof: * Angle : slope in degrees compared to the horizontal one. * Run : outdistance between the wall and the ridge sheathing. @@ -993,25 +957,15 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela - + Id - - Run - - - - + IdRel - - - Overhang - - If false, non-solids will be cut too, with possible wrong results. @@ -1113,10 +1067,111 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela - + Sill height + + + CutVolume + + + + + CutPlane + + + + + PreviewCutVolume + + + + + Cut Plane + + + + + Cut Plane options + + + + + Wich side to cut + + + + + Behind + + + + + Front + + + + + Crossing point not found in profile. + + + + + + A list of angles for each roof pane + + + + + A list of horizontal length projections for each roof pane + + + + + A list of IDs of relative profiles for each roof pane + + + + + A list of thicknesses for each roof pane + + + + + A list of overhangs for each roof pane + + + + + A list of calculated heights for each roof pane + + + + + Angle (deg) + + + + + Run (mm) + + + + + Thickness (mm) + + + + + Overhang (mm) + + + + + Height (mm) + + Arch_3Views @@ -1204,13 +1259,13 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela Arch_CutPlane - - Cut object + + Cut with plane - - Cut the object with plane + + Cut an object with a plane diff --git a/src/Mod/Draft/Resources/translations/Draft.ts b/src/Mod/Draft/Resources/translations/Draft.ts index 2210871c13..1b8ba6a5a3 100755 --- a/src/Mod/Draft/Resources/translations/Draft.ts +++ b/src/Mod/Draft/Resources/translations/Draft.ts @@ -3,12 +3,12 @@ Draft_AddPoint - + Add Point - + Adds a point to an existing wire/bspline @@ -16,12 +16,12 @@ Draft_AddToGroup - + Add to group... - + Adds the selected object(s) to an existing group @@ -29,12 +29,12 @@ Draft_ApplyStyle - + Apply Current Style - + Applies current line width and color to selected objects @@ -55,12 +55,12 @@ Draft_Array - + Array - + Creates a polar or rectangular array from a selected object @@ -94,12 +94,12 @@ Draft_Circle - + Circle - + Creates a circle. CTRL to snap, ALT to select tangent objects @@ -107,12 +107,12 @@ Draft_Clone - + Clone - + Clones the selected object(s) @@ -133,12 +133,12 @@ Draft_DelPoint - + Remove Point - + Removes a point from an existing wire or bspline @@ -146,12 +146,12 @@ Draft_Dimension - + Dimension - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment @@ -159,12 +159,12 @@ Draft_Downgrade - + Downgrade - + Explodes the selected objects into simpler objects, or subtract faces @@ -172,7 +172,7 @@ Draft_Draft2Sketch - + Draft to Sketch @@ -180,12 +180,12 @@ Draft_Drawing - + Drawing - + Puts the selected objects on a Drawing sheet. @@ -193,12 +193,12 @@ Draft_Edit - + Edit - + Edits the active object @@ -206,12 +206,12 @@ Draft_Ellipse - + Ellipse - + Creates an ellipse. CTRL to snap @@ -219,12 +219,12 @@ Draft_Facebinder - + Facebinder - + Creates a facebinder object from selected face(s) @@ -245,12 +245,12 @@ Draft_FlipDimension - + Flip Dimension - + Flip the normal direction of a dimension @@ -258,19 +258,16 @@ Draft_Heal - + Heal - + Heal faulty Draft objects saved from an earlier FreeCAD version - - Draft_Layer - Draft_Line @@ -287,12 +284,12 @@ Draft_Move - + Move - + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy @@ -300,12 +297,12 @@ Draft_Offset - + Offset - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy @@ -313,12 +310,12 @@ Draft_PathArray - + PathArray - + Creates copies of a selected object along a selected path. @@ -326,12 +323,12 @@ Draft_Point - + Point - + Creates a point object @@ -339,12 +336,12 @@ Draft_Polygon - + Polygon - + Creates a regular polygon. CTRL to snap, SHIFT to constrain @@ -365,12 +362,12 @@ Draft_Rotate - + Rotate - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy @@ -378,12 +375,12 @@ Draft_Scale - + Scale - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy @@ -391,12 +388,12 @@ Draft_SelectGroup - + Select group - + Selects all objects with the same parents as this group @@ -417,17 +414,17 @@ Draft_Shape2DView - + Shape 2D view - + Creates Shape 2D views of selected objects - + Convert bidirectionally between Draft and Sketch objects @@ -435,12 +432,12 @@ Draft_ShapeString - + Shape from text... - + Creates text string in shapes. @@ -448,12 +445,12 @@ Draft_ShowSnapBar - + Show Snap Bar - + Shows Draft snap toolbar @@ -461,12 +458,12 @@ Draft_Snap_Angle - + Angles - + Snaps to 45 and 90 degrees points on arcs and circles @@ -474,12 +471,12 @@ Draft_Snap_Center - + Center - + Snaps to center of circles and arcs @@ -487,12 +484,12 @@ Draft_Snap_Dimensions - + Dimensions - + Shows temporary dimensions when snapping to Arch objects @@ -500,12 +497,12 @@ Draft_Snap_Endpoint - + Endpoint - + Snaps to endpoints of edges @@ -513,12 +510,12 @@ Draft_Snap_Extension - + Extension - + Snaps to extension of edges @@ -526,12 +523,12 @@ Draft_Snap_Grid - + Grid - + Snaps to grid points @@ -539,12 +536,12 @@ Draft_Snap_Intersection - + Intersection - + Snaps to edges intersections @@ -552,12 +549,12 @@ Draft_Snap_Lock - + Toggle On/Off - + Activates/deactivates all snap tools at once @@ -565,12 +562,12 @@ Draft_Snap_Midpoint - + Midpoint - + Snaps to midpoints of edges @@ -578,12 +575,12 @@ Draft_Snap_Near - + Nearest - + Snaps to nearest point on edges @@ -591,12 +588,12 @@ Draft_Snap_Ortho - + Ortho - + Snaps to orthogonal and 45 degrees directions @@ -604,12 +601,12 @@ Draft_Snap_Parallel - + Parallel - + Snaps to parallel directions of edges @@ -617,12 +614,12 @@ Draft_Snap_Perpendicular - + Perpendicular - + Snaps to perpendicular points on edges @@ -630,12 +627,12 @@ Draft_Snap_WorkingPlane - + Working Plane - + Restricts the snapped point to the current working plane @@ -643,12 +640,12 @@ Draft_Text - + Text - + Creates an annotation. CTRL to snap @@ -656,12 +653,12 @@ Draft_ToggleConstructionMode - + Toggle construcion Mode - + Toggles the Construction Mode for next objects. @@ -669,12 +666,12 @@ Draft_ToggleContinueMode - + Toggle Continue Mode - + Toggles the Continue Mode for next commands. @@ -682,12 +679,12 @@ Draft_ToggleDisplayMode - + Toggle display mode - + Swaps display mode of selected objects between wireframe and flatlines @@ -695,12 +692,12 @@ Draft_ToggleGrid - + Toggle Grid - + Toggles the Draft grid on/off @@ -708,12 +705,12 @@ Draft_Trimex - + Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts @@ -734,12 +731,12 @@ Draft_Upgrade - + Upgrade - + Joins the selected objects into one, or converts closed wires to filled faces, or unite faces @@ -747,12 +744,12 @@ Draft_VisGroup - + VisGroup - + Adds a VisGroup @@ -773,12 +770,12 @@ Draft_WireToBSpline - + Wire to BSpline - + Converts between Wire and BSpline @@ -1644,6 +1641,46 @@ Values with differences below this value will be treated as same. extension lines size + + + Drawing views + + + + + Dashed line definition + + + + + A SVG linestyle definition + + + + + 0.09,0.05 + + + + + Dashdot line definition + + + + + 0.09,0.05,0.02,0.05 + + + + + Dotted line definition + + + + + 0.02,0.02 + + Workbench @@ -1831,7 +1868,7 @@ Values with differences below this value will be treated as same. - + Offset @@ -2094,109 +2131,109 @@ Values with differences below this value will be treated as same. - + Found groups: closing each open object inside - + Found mesh(es): turning into Part shapes - + Found 1 solidificable object: solidifying it - + Found 2 objects: fusing them - + Found 1 non-parametric objects: draftifying it - + Found 1 open wire: closing it - + Found several open wires: joining them - + Found several edges: wiring them - + Unable to upgrade these objects. - + Found 1 block: exploding it - + Found 1 parametric object: breaking its dependencies - + Found 2 objects: subtracting them - + Found several faces: splitting them - + Found several objects: subtracting them from the first one - + Found 1 face: extracting its wires - + Found only wires: extracting their edges - + No more downgrade possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. @@ -2208,7 +2245,7 @@ Values with differences below this value will be treated as same. - + Pick first point: @@ -2295,25 +2332,25 @@ Values with differences below this value will be treated as same. - + Pick opposite point: - + Pick center point: - + Pick radius: - + Pick start angle: @@ -2330,292 +2367,286 @@ Values with differences below this value will be treated as same. - + Create Arc - + Start Angle - + Aperture - + Aperture angle: - + Polygon - + Create Polygon - + Ellipse - + Create Ellipse - + Text - + Pick location point: - + Create Text - + Dimension - + Create Dimension - + Edges don't intersect! - + ShapeString - + Pick ShapeString location point: - + Create ShapeString - + Move - + Select an object to move - + Pick start point: - + Copy - + Pick end point: - + Change Style - + Select an object to rotate - + Pick rotation center: - + Rotate - + Pick base angle: - + Pick rotation angle: - + Select an object to offset - + Offset only works on one object at a time - + Cannot offset this object type - + Pick distance: - + Select an object to upgrade - + Upgrade - + Downgrade - - Select an object to trim/extend - - - - - + Scale - + Select an object to scale - + Pick base point: - + Pick scale factor: - + Select an object to project - + Select a Draft object to edit - + This object type is not editable - + Active object must have more than two points/nodes - + Selection is not a Knot - + Endpoint of BezCurve can't be smoothed - + Select an object to convert - + Select an object to array - + Please select base and path objects - + Create Point - + Select an object to clone - + Select face(s) on existing object(s) @@ -2647,7 +2678,7 @@ Values with differences below this value will be treated as same. - + Found 1 multi-solids compound: exploding it @@ -2658,47 +2689,47 @@ Values with differences below this value will be treated as same. - + BSplines and Bezier curves are not supported by this tool - + The given object is not planar and cannot be converted into a sketch. - + Found several objects: creating a shell - + Found several coplanar objects or faces: creating one face - + Found 1 linear object: converting to line - + Found 1 closed sketch object: creating a face from it - + Found closed wires: creating faces - + Found several non-treatable objects: creating compound @@ -2749,30 +2780,60 @@ Values with differences below this value will be treated as same. - + Sorry, offset of Bezier curves is currently still not supported - + Convert to Sketch - + Convert to Draft - + Convert - + Array + + + Select object(s) to trim/extend + + + + + + Unable to trim these objects, only Draft wires and arcs are supported + + + + + + Unable to trim these objects, too many wires + + + + + + These objects don't intersect + + + + + + Too many intersection points + + + diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_af.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_af.ts index c8ee6b5fe4..9a724db64b 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_af.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_af.ts @@ -39,10 +39,29 @@ Inserts a clip group in the active drawing + + CmdDrawingDraftView + + + Drawing + Tekening + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File Lêer @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG (*.svg) + SVG (*.svg) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... Make axonometric... - - + + Edit axonometric settings... Edit axonometric settings... - - + + Make orthographic Make orthographic diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_cs.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_cs.ts index 91ed63ecfa..ea854ebc33 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_cs.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_cs.ts @@ -39,10 +39,29 @@ Vložení výřezu skupiny v aktivním výkresu + + CmdDrawingDraftView + + + Drawing + Výkres + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File Soubor @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG(*.svg) + SVG(*.svg) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... Make axonometric... - - + + Edit axonometric settings... Edit axonometric settings... - - + + Make orthographic Make orthographic diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_de.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_de.ts index cda849ea0e..9946b5348b 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_de.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_de.ts @@ -39,10 +39,29 @@ eine Auschnittsgruppe in die aktive Zeichnung einfügen + + CmdDrawingDraftView + + + Drawing + Zeichnung + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File Datei @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG(*.svg) + SVG(*.svg) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... - - + + Edit axonometric settings... - - + + Make orthographic diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_es-ES.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_es-ES.ts index e0e6ce7154..d9c05dfe76 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_es-ES.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_es-ES.ts @@ -39,10 +39,29 @@ Inserta un clip de grupo en el actual dibujo + + CmdDrawingDraftView + + + Drawing + Dibujo + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File Archivo @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG(*.svg) + SVG(*.svg) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... Hacer axonométricas... - - + + Edit axonometric settings... Editar configuración axonométricas... - - + + Make orthographic Hacer ortográfica diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_fi.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_fi.ts index 5c19f19ec4..74df987d78 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_fi.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_fi.ts @@ -39,10 +39,29 @@ Lisää leikeryhmän aktiiviseen tekniseen piirustukseen + + CmdDrawingDraftView + + + Drawing + Piirustus + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File Tiedosto @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG(*.svg) + SVG(*.svg) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... Make axonometric... - - + + Edit axonometric settings... Edit axonometric settings... - - + + Make orthographic Make orthographic diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_fr.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_fr.ts index eec207a127..38d46bee1d 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_fr.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_fr.ts @@ -39,10 +39,29 @@ Insère un groupe de masquage sur la feuille active + + CmdDrawingDraftView + + + Drawing + Mise en plan + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File Fichier @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG (*.svg) + SVG (*.svg) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... Rendre axonométrique... - - + + Edit axonometric settings... Modifier les paramètres axonométriques... - - + + Make orthographic Faire orthographique diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_hr.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_hr.ts index d5984ceccb..0fcfb2c1f0 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_hr.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_hr.ts @@ -39,10 +39,29 @@ Dodaje izrezanu grupu aktivnom pogledu + + CmdDrawingDraftView + + + Drawing + Crtež + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File Datoteka @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG (*. svg) + SVG (*. svg) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... Make axonometric... - - + + Edit axonometric settings... Edit axonometric settings... - - + + Make orthographic Make orthographic diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.ts index 9da4f8a7ce..d7f932404b 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_hu.ts @@ -39,10 +39,29 @@ Kivágás csoport beillesztése az aktív rajzba + + CmdDrawingDraftView + + + Drawing + Rajzolás + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File Fájl @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG(*.svg) + SVG(*.svg) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... Make axonometric... - - + + Edit axonometric settings... Edit axonometric settings... - - + + Make orthographic Make orthographic diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_it.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_it.ts index e4390766d0..cbdea0ca3b 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_it.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_it.ts @@ -39,10 +39,29 @@ Iserisce un gruppo clip nel disegno attivo + + CmdDrawingDraftView + + + Drawing + Disegno + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File File @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG (*.svg) + SVG (*.svg) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... Rendi assonometrica... - - + + Edit axonometric settings... Modifica impostazioni assonometriche... - - + + Make orthographic Rendi ortografica diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ja.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ja.ts index 63802d5d0f..ba177229b5 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ja.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ja.ts @@ -39,10 +39,29 @@ アクティブな図面にクリップグループを挿入 + + CmdDrawingDraftView + + + Drawing + 図面 + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File ファイル @@ -770,8 +789,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG(*.svg) + SVG(*.svg) @@ -814,19 +837,19 @@ Do you want to continue? - + Make axonometric... Make axonometric... - - + + Edit axonometric settings... Edit axonometric settings... - - + + Make orthographic Make orthographic diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_nl.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_nl.ts index 64d9b723c8..8e5f2c8fb4 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_nl.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_nl.ts @@ -39,10 +39,29 @@ Inserts a clip group in the active drawing + + CmdDrawingDraftView + + + Drawing + Tekening + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File Bestand @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG (*.svg) + SVG (*.svg) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... Make axonometric... - - + + Edit axonometric settings... Edit axonometric settings... - - + + Make orthographic Make orthographic diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_no.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_no.ts index 4d883686c0..bc2c5519c0 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_no.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_no.ts @@ -39,10 +39,29 @@ Inserts a clip group in the active drawing + + CmdDrawingDraftView + + + Drawing + Tegning + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File Fil @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG (*.svg) + SVG (*.svg) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... Make axonometric... - - + + Edit axonometric settings... Edit axonometric settings... - - + + Make orthographic Make orthographic diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.ts index 4eb1d1b4ac..f207a1bb8a 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.ts @@ -39,10 +39,29 @@ Wstawia grupę klipu do aktywnego rysunku + + CmdDrawingDraftView + + + Drawing + Rysunek + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File Plik @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG (*. svg) + SVG (*. svg) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... Make axonometric... - - + + Edit axonometric settings... Edit axonometric settings... - - + + Make orthographic Make orthographic diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-BR.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-BR.ts index f177a5198c..eccf89f73a 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-BR.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-BR.ts @@ -39,10 +39,29 @@ Inserir um grupo de Apara no desenho ativo + + CmdDrawingDraftView + + + Drawing + Desenho + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File Arquivo @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG (*.svg) + SVG (*.svg) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... Fazer axonométrico... - - + + Edit axonometric settings... Editar configurações axonométricas... - - + + Make orthographic Fazer ortográfico diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-PT.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-PT.ts index ba30b94914..5d4bd84685 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-PT.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pt-PT.ts @@ -39,10 +39,29 @@ Insere um grupo de corte no desenho ativo + + CmdDrawingDraftView + + + Drawing + Desenho + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File Ficheiro @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG (*. svg) + SVG (*. svg) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... Fazer axonométria... - - + + Edit axonometric settings... Editar configurações axonométricas... - - + + Make orthographic Make orthographic diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ro.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ro.ts index 1770f141ac..29414e633f 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ro.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ro.ts @@ -39,10 +39,29 @@ Inserează un grup de clipuri în desenul activ + + CmdDrawingDraftView + + + Drawing + Desen + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File Fişier @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG (*.SVG) + SVG (*.SVG) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... Make axonometric... - - + + Edit axonometric settings... Edit axonometric settings... - - + + Make orthographic Make orthographic diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ru.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ru.ts index 581acac093..03374becbb 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ru.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ru.ts @@ -39,10 +39,29 @@ Вставить группу клипов в активный чертёж + + CmdDrawingDraftView + + + Drawing + Чертеж + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File Файл @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG(*.svg) + SVG(*.svg) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... Make axonometric... - - + + Edit axonometric settings... Edit axonometric settings... - - + + Make orthographic Make orthographic diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sk.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sk.ts index d131c735d8..8254d5419a 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sk.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sk.ts @@ -39,10 +39,29 @@ Inserts a clip group in the active drawing + + CmdDrawingDraftView + + + Drawing + Kreslenie + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File Súbor @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG (*.svg) + SVG (*.svg) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... Make axonometric... - - + + Edit axonometric settings... Edit axonometric settings... - - + + Make orthographic Make orthographic diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sv-SE.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sv-SE.ts index 09f8a1832c..5f97151721 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sv-SE.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sv-SE.ts @@ -39,10 +39,29 @@ Infogar en Klipp-grupp i den aktiva ritningen + + CmdDrawingDraftView + + + Drawing + Ritning + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File Fil @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG (*.svg) + SVG (*.svg) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... Make axonometric... - - + + Edit axonometric settings... Edit axonometric settings... - - + + Make orthographic Make orthographic diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_tr.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_tr.ts index b0f5555563..5d9b28369e 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_tr.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_tr.ts @@ -39,10 +39,29 @@ Etkin çizimine kırpma grubu ekler + + CmdDrawingDraftView + + + Drawing + Çizim + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File Dosya @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG(*.svg) + SVG(*.svg) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... Make axonometric... - - + + Edit axonometric settings... Edit axonometric settings... - - + + Make orthographic Make orthographic diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_uk.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_uk.ts index 0da95989db..bd3cb67193 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_uk.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_uk.ts @@ -39,10 +39,29 @@ Вставляє кліп групи у активне креслення + + CmdDrawingDraftView + + + Drawing + Малюнок + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File Файл @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG(*.svg) + SVG(*.svg) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... Make axonometric... - - + + Edit axonometric settings... Edit axonometric settings... - - + + Make orthographic Make orthographic diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-CN.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-CN.ts index f36f1269ef..4de75b427f 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-CN.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-CN.ts @@ -39,10 +39,29 @@ 在当前图纸中插入剪辑组 + + CmdDrawingDraftView + + + Drawing + 图纸 + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File 文件 @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG(*.svg) + SVG(*.svg) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... Make axonometric... - - + + Edit axonometric settings... Edit axonometric settings... - - + + Make orthographic Make orthographic diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-TW.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-TW.ts index a122ba5079..98bcdf6659 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-TW.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_zh-TW.ts @@ -39,10 +39,29 @@ 於目前圖面插入剪下群組 + + CmdDrawingDraftView + + + Drawing + 工程圖 + + + + &Draft View + + + + + + Inserts a Draft view of the selected object(s) in the active drawing + + + CmdDrawingExportPage - + File 檔案 @@ -769,8 +788,12 @@ Do you want to continue? + SVG (*.svg) + + + SVG(*.svg) - SVG(*.svg) + SVG(*.svg) @@ -813,19 +836,19 @@ Do you want to continue? - + Make axonometric... Make axonometric... - - + + Edit axonometric settings... 編輯軸測設定 - - + + Make orthographic 建立正投影視角 diff --git a/src/Mod/Part/Gui/Resources/translations/Part_af.ts b/src/Mod/Part/Gui/Resources/translations/Part_af.ts index 1abaf8f907..0e98866521 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_af.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_af.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part Onderdeel @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part Onderdeel diff --git a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts index a5d8824cf0..763892fb56 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part Díl @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part Díl diff --git a/src/Mod/Part/Gui/Resources/translations/Part_de.ts b/src/Mod/Part/Gui/Resources/translations/Part_de.ts index c564a378b5..9d47937e8f 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_de.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_de.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part Formteil @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part Formteil diff --git a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts index 167cff0595..7a38bcd572 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part Pieza @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part Pieza diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fi.ts b/src/Mod/Part/Gui/Resources/translations/Part_fi.ts index 8329cd65c0..8979d68c72 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fi.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fi.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part osa @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part osa diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts index e692743e01..d8b8e5ae7c 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part Pièce @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part Pièce diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hr.ts b/src/Mod/Part/Gui/Resources/translations/Part_hr.ts index 8bcee92402..6d94b186b2 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_hr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_hr.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part Geometrijsko tijelo @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part Geometrijsko tijelo diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts index 66eb6be7da..244749766b 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part Alkatrész @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part Alkatrész diff --git a/src/Mod/Part/Gui/Resources/translations/Part_it.ts b/src/Mod/Part/Gui/Resources/translations/Part_it.ts index 962f4bd8a5..76c25b9764 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_it.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_it.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part Parte @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part Parte diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts index 02d7b6d8be..0ac2de8518 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part 部品 @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part 部品 diff --git a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts index f7d2b1fd6e..e2715bfb85 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part Component @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part Component diff --git a/src/Mod/Part/Gui/Resources/translations/Part_no.ts b/src/Mod/Part/Gui/Resources/translations/Part_no.ts index 732eeddc8b..9ac9747c01 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_no.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_no.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part Komponent @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part Komponent diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts index 7159866df4..1c2799bfbc 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part Część @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part Część diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts index 4261f8242d..b4501aea33 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part Part @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part Part diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts index 0be1531973..cc2a62b0dd 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part Parte @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part Parte diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts index b4b3d9ef24..eb88849a91 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part Componentă @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part Componentă diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts index 85d2f844e3..e1db4c3d3b 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part Деталь @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part Деталь diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sk.ts b/src/Mod/Part/Gui/Resources/translations/Part_sk.ts index 7b2a7035f5..40b143a644 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sk.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sk.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part Časť @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part Časť diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts index b5ef026287..02901fe318 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part Detalj @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part Detalj diff --git a/src/Mod/Part/Gui/Resources/translations/Part_tr.ts b/src/Mod/Part/Gui/Resources/translations/Part_tr.ts index 010e8cc76a..f792319afe 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_tr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_tr.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part Parça @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part Parça diff --git a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts index f636c5c1e6..fb658233ce 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part Частина @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part Частина diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts index ab68fcd88d..37ca466665 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part 零件 @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part 零件 diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts index 4ea9a664d9..9b0cdd9088 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts @@ -701,7 +701,7 @@ CmdPartRefineShape - + Part 零件 @@ -795,7 +795,7 @@ CmdPartShapeFromMesh - + Part 零件 diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_af.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_af.ts index 064812300a..22250d310c 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_af.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_af.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher Sketser @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher Sketser @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketser @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketser @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher Sketser @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketser @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketser @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher Sketser @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher Sketser @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketser @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher Sketser @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketser @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher Sketser @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher Sketser @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ Kies die kant(e) van die skets. - + Select an edge from the sketch. Kies 'n rand in die skets. @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. Kies hoekpunte in die skets. - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ Kies presies twee hoekpunte uit die skets. - + Select two or more vertexes from the sketch. Select two or more vertexes from the sketch. - + Select exactly one line or one point and one line or two points from the sketch. Kies presies een lyn of een punt en een lyn of twee punte uit die skets. - + Cannot add a length constraint on an external geometry! Cannot add a length constraint on an external geometry! @@ -1640,21 +1640,21 @@ Cannot add a length constraint on an axis! - + Select exactly one point and one object from the sketch. Kies presies een punt en een voorwerp van die skets. - + - + Select exactly one line or up to two points from the sketch. Kies presies een lyn of tot twee punte uit die skets. - + Cannot add a horizontal length constraint on an external geometry! Cannot add a horizontal length constraint on an external geometry! @@ -1672,7 +1672,7 @@ Cannot add a fixed x-cootdinate constraint on the root point! - + Cannot add a vertical length constraint on an external geometry! Cannot add a vertical length constraint on an external geometry! @@ -1690,18 +1690,18 @@ Cannot add a fixed y-cootdinate constraint on the root point! - + Select two or more lines from the sketch. Kies twee of meer lyne van die skets. - + Select at least two lines from the sketch. Kies ten minste twee lyne van die skets. - + Select a valid line Kies 'n geldige lyn @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select one or two lines from the sketch. - + Cannot add an angle constraint on an external geometry! Cannot add an angle constraint on an external geometry! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Kies presies een of twee lyne van die skets. - + Select two edges from the sketch. Kies twee kante van die skets. @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Nie toegelaat om die datum te wysig want die skets bevat teenstrydige beperkings - + + Dimensional constraint Dimensionele beperking @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle Insert angle + Angle: Hoek: + Insert radius Insert radius + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: Radius: - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length Insert length + Length: Lengte: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts index d6fb94fad7..42f37cbcb5 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_cs.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher Sketcher @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ Vyberte hrany ze skicy. - + Select an edge from the sketch. Vyber hranu z náčrtu. @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. Vyberte vrcholy ze skici. - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ Vyberte přesně dva vrcholy ze skici. - + Select two or more vertexes from the sketch. Select two or more vertexes from the sketch. - + Select exactly one line or one point and one line or two points from the sketch. Vyberte právě jednu úsečku nebo jeden bod a úsečku nebo dva body ze skici. - + Cannot add a length constraint on an external geometry! Nelze přidat délkovou vazbu na vnější geometrii! @@ -1640,21 +1640,21 @@ Nelze přidat délkovou vazbu osy! - + Select exactly one point and one object from the sketch. Vyberte právě jeden bod a jeden objekt ze skici. - + - + Select exactly one line or up to two points from the sketch. Vyberte právě jednu úsečku nebo až dva body ze skici. - + Cannot add a horizontal length constraint on an external geometry! Nelze přidat vodorovnou délkovou vazbu na vnější geometii! @@ -1672,7 +1672,7 @@ Nelze přidat pevnou x-ovou vazbu počátku! - + Cannot add a vertical length constraint on an external geometry! Nelze přidat svislé délkové omezení na vnější geometii! @@ -1690,18 +1690,18 @@ Nelze přidat pevnou y-ovou vazbu počátku! - + Select two or more lines from the sketch. Vyberte dvě nebo více úseček ze skici. - + Select at least two lines from the sketch. Vyberte nejméně dvě úsečky ze skici. - + Select a valid line Vyberte platnou úsečku @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Vyberte jednu nebo dvě úsečky ze skici. - + Cannot add an angle constraint on an external geometry! Nelze přidat úhlovou vazbu na vnější geometrii! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Vyberte jednu nebo dvě úsečky ze skici. - + Select two edges from the sketch. Vyberte dvě hrany ze skici. @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Není dovoleno upravit hodnotu, protože náčrt obsahuje konfliktní vazby - + + Dimensional constraint Délkové omezení @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle Insert angle + Angle: Úhel: + Insert radius Insert radius + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: Poloměr: - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length Insert length + Length: Délka: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts index e533cd61ce..a85aaa9410 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher Skizze @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher Skizze @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Skizze @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Skizze @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher Skizze @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Skizze @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Skizze @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher Skizze @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher Skizze @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Skizze @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher Skizze @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Skizze @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher Skizze @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher Skizze @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ Wählen Sie Kante(n) aus der Skizze. - + Select an edge from the sketch. Wählen Sie eine Kante aus der Skizze. @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. Wählen Sie Vertexe aus der Skizze aus. - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ Wählen Sie genau zwei Vertexe aus der Skizze aus. - + Select two or more vertexes from the sketch. - + Select exactly one line or one point and one line or two points from the sketch. Wählen Sie genau eine Linie oder einen Punkt und eine Linie oder zwei Punkte aus der Skizze aus. - + Cannot add a length constraint on an external geometry! Eine Längenbeschränkung auf eine externe Geometrie kann nicht hinzugefügt werden! @@ -1640,21 +1640,21 @@ Keine Längenbeschränkung einer Achse möglich! - + Select exactly one point and one object from the sketch. Wählen Sie genau einen Punkt und ein Objekt aus der Skizze aus. - + - + Select exactly one line or up to two points from the sketch. Wählen Sie genau eine Linie oder bis zu zwei Punkte aus der Skizze aus. - + Cannot add a horizontal length constraint on an external geometry! Eine horizontale Längenbeschränkung für eine externe Geometrie kann nicht hinzugefügt werden! @@ -1672,7 +1672,7 @@ Kann x-Koordinate des Ursprungs nicht fixieren! - + Cannot add a vertical length constraint on an external geometry! Eine vertikale Längenbeschränkung für eine externe Geometrie kann nicht hinzugefügt werden! @@ -1690,18 +1690,18 @@ Kann y-Koordinate vom Ursprung nicht fixieren! - + Select two or more lines from the sketch. Wählen Sie zwei oder mehr Linien aus der Skizze aus. - + Select at least two lines from the sketch. Wählen Sie mindestens zwei Linien aus der Skizze aus. - + Select a valid line Wählen Sie eine gültige Linie aus @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Wählen Sie eine oder zwei Geraden aus der Skizze aus. - + Cannot add an angle constraint on an external geometry! Eine Winkelbeschränkung für eine externe Geometrie kann nicht hinzugefügt werden! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Wählen Sie genau eine oder zwei Linien aus der Skizze aus. - + Select two edges from the sketch. Wählen Sie zwei Kanten aus der Skizze aus. @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Der Wert kann nicht geändert werden, da die Skizze Randbedingungskonflikte enthält - + + Dimensional constraint Dimensionale Beschränkung @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle + Angle: + Insert radius + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length + Length: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts index f1e5177e88..6a61dc9a8a 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher Croquizador @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher Croquizador @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Croquizador @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Croquizador @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher Croquizador @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Croquizador @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Croquizador @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher Croquizador @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher Croquizador @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Croquizador @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher Croquizador @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Croquizador @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher Croquizador @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher Croquizador @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ Seleccione arista(s) del dibujo. - + Select an edge from the sketch. Seleccione una arista del dibujo. @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. Seleccione vértices del dibujo. - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ Seleccione exactamente dos vértices del dibujo. - + Select two or more vertexes from the sketch. Seleccione dos o más vértices en el boceto. - + Select exactly one line or one point and one line or two points from the sketch. Seleccione exactamente una línea o un punto y una línea o dos puntos del dibujo. - + Cannot add a length constraint on an external geometry! ¡No se puede agregar una restricción de longitud en una geometría externa! @@ -1640,21 +1640,21 @@ No se puede añadir una restricción de longitud en un eje! - + Select exactly one point and one object from the sketch. Seleccione exactamente un punto y un objeto del dibujo. - + - + Select exactly one line or up to two points from the sketch. Seleccione exactamente una línea o hasta dos puntos del dibujo. - + Cannot add a horizontal length constraint on an external geometry! ¡No se puede agregar una restricción de longitud horizontal en una geometría externa! @@ -1672,7 +1672,7 @@ No se puede añadir una restricción fija de coordenada-x en el punto raíz! - + Cannot add a vertical length constraint on an external geometry! No se puede agregar una restricción de longitud vertical en una geometría externa! @@ -1690,18 +1690,18 @@ No se puede añadir una restricción fija de coordenada-y en el punto raíz! - + Select two or more lines from the sketch. Seleccione dos o más líneas del dibujo. - + Select at least two lines from the sketch. Seleccione al menos dos líneas del dibujo. - + Select a valid line Seleccione una línea válida @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Seleccione una o dos líneas del dibujo. - + Cannot add an angle constraint on an external geometry! ¡No se puede añadir una restricción angular en una geometría externa! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Seleccione exactamente una o dos líneas del dibujo. - + Select two edges from the sketch. Seleccione dos bordes del dibujo. @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c No permite editar los datos de referencia porque el esbozo contiene restricciones conflictivas - + + Dimensional constraint Restricción dimensional @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle Insertar ángulo + Angle: Ángulo: + Insert radius Insertar radio + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: Radio: - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length Insertar longitud + Length: Longitud: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts index 17548a5204..57f0da3c1a 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fi.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher Lunnostelija @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher Lunnostelija @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Lunnostelija @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Lunnostelija @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher Lunnostelija @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Lunnostelija @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Lunnostelija @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher Lunnostelija @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher Lunnostelija @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Lunnostelija @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher Lunnostelija @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Lunnostelija @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher Lunnostelija @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher Lunnostelija @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ Valitse reuna(t) sketsistä. - + Select an edge from the sketch. Valitse luonnoksen reuna. @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. Valitse pisteet luonnoksesta. - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ Valitse kaksi pistettä luonnoksesta. - + Select two or more vertexes from the sketch. Select two or more vertexes from the sketch. - + Select exactly one line or one point and one line or two points from the sketch. Valitse täsmälleen yksi viiva tai yksi piste ja yksi viiva tai kaksi pistettä sketsistä. - + Cannot add a length constraint on an external geometry! Ulkoiseen geometriaan ei voida lisätä pituusrajoitetta! @@ -1640,21 +1640,21 @@ Akselille ei voida lisätä pituusrajoitetta! - + Select exactly one point and one object from the sketch. Valitse täsmälleen yksi piste ja yksi objekti sketsistä. - + - + Select exactly one line or up to two points from the sketch. Valitse täsmälleen yksi viiva tai enintään kaksi pistettä sketsistä. - + Cannot add a horizontal length constraint on an external geometry! Ulkoiseen geometriaan ei voida lisätä vaakasuoraa pituusrajoitetta! @@ -1672,7 +1672,7 @@ Juuripisteeseen ei voida lisätä kiinteää x-koordinaattirajoitetta! - + Cannot add a vertical length constraint on an external geometry! Ulkoiseen geometriaan ei voida lisätä pystypituusrajoitetta! @@ -1690,18 +1690,18 @@ Juuripisteeseen ei voida lisätä kiinteää y-koordinaattirajoitetta! - + Select two or more lines from the sketch. Valitse kaksi tai useampi viiva sketsistä. - + Select at least two lines from the sketch. Valitse vähintään kaksi viivaa sketsistä. - + Select a valid line Valitse kelvollinen viiva @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Valitse luonnoksesta yksi tai kaksi viivaa. - + Cannot add an angle constraint on an external geometry! Ulkoiseen geometriaan ei voida lisätä kulmarajoitetta! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Valitse sketsistä täsmälleen yksi tai kaksi viivaa. - + Select two edges from the sketch. Valitse kaksi reunaa sketsistä. @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Tietoja ei voi muokata, koska sketsi sisältää ristiriitaisia rajoitteita - + + Dimensional constraint Mittarajoite @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle Insert angle + Angle: Kulma: + Insert radius Insert radius + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: Säde: - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length Insert length + Length: Pituus: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts index 8958a17287..5a906fa928 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher Esquisseur @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher Esquisseur @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Esquisseur @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Esquisseur @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher Esquisseur @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Esquisseur @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Esquisseur @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher Esquisseur @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher Esquisseur @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Esquisseur @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher Esquisseur @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Esquisseur @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher Esquisseur @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher Esquisseur @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ Sélectionnez une ou des arêtes de l'esquisse. - + Select an edge from the sketch. Sélectionnez une arête de l'esquisse. @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. Sélectionnez les sommets de l'esquisse. - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ Sélectionnez exactement deux sommets de l'esquisse. - + Select two or more vertexes from the sketch. Sélectionnez deux sommets de l'esquisse ou plus. - + Select exactly one line or one point and one line or two points from the sketch. Sélectionnez soit une seule ligne, ou un point et une ligne, ou deux points de l'esquisse. - + Cannot add a length constraint on an external geometry! Impossible d'ajouter une contrainte de longueur sur une géométrie externe! @@ -1640,21 +1640,21 @@ Impossible d'ajouter une contrainte de longueur sur un axe ! - + Select exactly one point and one object from the sketch. Sélectionnez exactement un point et un objet de l'esquisse. - + - + Select exactly one line or up to two points from the sketch. Sélectionnez soit une seule ligne ou jusqu'à deux points de l'esquisse. - + Cannot add a horizontal length constraint on an external geometry! Impossible d'ajouter une contrainte de longueur horizontale sur une géométrie externe! @@ -1672,7 +1672,7 @@ Impossible d'ajouter une contrainte fixe en X sur le point d'origine ! - + Cannot add a vertical length constraint on an external geometry! Impossible d'ajouter une contrainte de longueur verticale sur une géométrie externe! @@ -1690,18 +1690,18 @@ Impossible d'ajouter une contrainte fixe en Y sur le point d'origine! - + Select two or more lines from the sketch. Sélectionnez au moins deux lignes de l'esquisse. - + Select at least two lines from the sketch. Sélectionner au moins deux lignes de l'esquisse. - + Select a valid line Sélectionnez une ligne valide @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sélectionnez une ou deux lignes de l'esquisse. - + Cannot add an angle constraint on an external geometry! Impossible d'ajouter de contrainte angulaire sur une géométrie externe! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Sélectionnez soit une ou deux lignes de l'esquisse. - + Select two edges from the sketch. Sélectionnez deux arêtes de l'esquisse. @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c L'édition de cette valeur n'est pas autorisée car l'esquisse contient des contraintes conflictuelles - + + Dimensional constraint Contrainte dimensionnelle @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle insérer un angle + Angle: Angle : + Insert radius insérer un rayon + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: Rayon : - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length insérer une longueur + Length: Longueur : diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts index 48eabfd3eb..08d6b007ee 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hr.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher Skica @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher Skica @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Skica @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Skica @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher Skica @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Skica @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Skica @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher Skica @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher Skica @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Skica @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher Skica @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Skica @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher Skica @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher Skica @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ Odaberite rub(ove) iz skice. - + Select an edge from the sketch. Odaberite rub skice. @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. Odaberite vrhove sa skice. - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ Odaberite točno dva vrha iz skice. - + Select two or more vertexes from the sketch. Select two or more vertexes from the sketch. - + Select exactly one line or one point and one line or two points from the sketch. Odaberite točno jednu liniju ili jednu točku i jednu liniju ili dvije točke iz skice. - + Cannot add a length constraint on an external geometry! Nemoguće dodavanje ograničenja duljine na vanjsku geometriju! @@ -1640,21 +1640,21 @@ Ne možete dodati ograničenje duljine na osi! - + Select exactly one point and one object from the sketch. Odaberite točno jednu točku i jedan objekt iz skice. - + - + Select exactly one line or up to two points from the sketch. Odaberite točno jednu liniju ili do dvije točke iz skice. - + Cannot add a horizontal length constraint on an external geometry! Nemoguće dodavanje vodoravnog ograničenja na vanjsku geometriju! @@ -1672,7 +1672,7 @@ Nemoguće je fiksirati koordinatu ishodišta! - + Cannot add a vertical length constraint on an external geometry! Nemoguće dodavanje ograničenja duljine na vanjsku geometriju! @@ -1690,18 +1690,18 @@ Nemoguće je fiksirati koordinatu ishodišta! - + Select two or more lines from the sketch. Odaberite dvije ili više linija iz skice. - + Select at least two lines from the sketch. Odaberite barem dvije linije iz skice. - + Select a valid line Odaberite valjanu liniju @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Odeaberite jednu ili dvije linije iz skice. - + Cannot add an angle constraint on an external geometry! Nemoguće dodavanje ograničenja kuta vanjskoj geometriji! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Odaberite točno jednu ili dvije linije iz skice. - + Select two edges from the sketch. Odaberite dva ruba iz skice. @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Nije dopušteno mijenjati podatak, jer skica sadrži proturječna ograničenja - + + Dimensional constraint Dimenzijonalno ograničenje @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle Insert angle + Angle: Kut: + Insert radius Insert radius + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: Polumjer: - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length Insert length + Length: Duljina: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts index ff8bc0a15f..d3a852b420 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_hu.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher Vázlatkészítõ @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher Vázlatkészítõ @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Vázlatkészítõ @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Vázlatkészítõ @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher Vázlatkészítõ @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Vázlatkészítõ @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Vázlatkészítõ @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher Vázlatkészítõ @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher Vázlatkészítõ @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Vázlatkészítõ @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher Vázlatkészítõ @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Vázlatkészítõ @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher Vázlatkészítõ @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher Vázlatkészítõ @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ A kiválasztott él(ek) a vázlatból való. - + Select an edge from the sketch. Egy él kiválasztása a vázlaton. @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. Csomópont kiválasztása a vázlaton. - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ Két csomópont kiválasztása a vázlaton. - + Select two or more vertexes from the sketch. Select two or more vertexes from the sketch. - + Select exactly one line or one point and one line or two points from the sketch. Válasszon ki pontosan egy sort vagy egy pontot és egy sort és két pontot a vázlatból. - + Cannot add a length constraint on an external geometry! Nem lehet hozzáadni egy külső geometriához a hosszanti illesztést! @@ -1640,21 +1640,21 @@ Nem adható hozzá a hosszanti illesztés egy tengelyen! - + Select exactly one point and one object from the sketch. Válasszon ki pontosan egy pontot és egy objektumot a vázlatból. - + - + Select exactly one line or up to two points from the sketch. Válasszon ki pontosan egy vonalat, vagy legfeljebb két pontot a vázlatból. - + Cannot add a horizontal length constraint on an external geometry! Nem lehet hozzáadni egy külső geometriához a vízszintes hosszanti illesztést! @@ -1672,7 +1672,7 @@ Nem adható hozzá a rögzített x-koordináta illesztése az alap ponthoz! - + Cannot add a vertical length constraint on an external geometry! Nem lehet hozzáadni egy külső geometriához a függőleges hosszanti illesztést! @@ -1690,18 +1690,18 @@ Nem adható hozzá a rögzített y-koordináta illesztése az alap ponthoz! - + Select two or more lines from the sketch. Válasszon ki a két vagy több vonalat a vázlatból. - + Select at least two lines from the sketch. Válasszon ki legalább két vonalat a vázlatból. - + Select a valid line Válasszon ki egy érvényes vonalat @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Válasszon egy vagy két vonalat a vázlatból. - + Cannot add an angle constraint on an external geometry! Nem lehet hozzáadni egy külső geometriához a szög illesztést! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Válasszon ki pontosan egy-két vonalat a vázlatból. - + Select two edges from the sketch. Két él kiválasztása a vázlaton. @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Nem megengedett, hogy módosítsa a datumot, mert a vázlat tartalmaz egymásnak ellentmondó illesztéseket - + + Dimensional constraint Méretezett illesztés @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle Insert angle + Angle: Dőlésszög: + Insert radius Insert radius + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: Sugár: - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length Insert length + Length: Hossz: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts index c3aae76551..b4e5dca9d4 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher Sketcher @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ Seleziona spigolo/i dello sketch. - + Select an edge from the sketch. Seleziona uno spigolo dello sketch. @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. Seleziona vertici dello sketch. - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ Seleziona esattamente due vertici dello sketch. - + Select two or more vertexes from the sketch. Seleziona due o più vertici dallo sketch. - + Select exactly one line or one point and one line or two points from the sketch. Seleziona esattamente una linea o un punto e una linea o due punti dello sketch. - + Cannot add a length constraint on an external geometry! Non è possibile aggiungere un vincolo di lunghezza su una geometria esterna! @@ -1640,21 +1640,21 @@ Non è possibile aggiungere un vincolo di lunghezza su un asse! - + Select exactly one point and one object from the sketch. Seleziona esattamente un punto e un oggetto dello sketch. - + - + Select exactly one line or up to two points from the sketch. Seleziona esattamente una linea o fino a due punti dello sketch. - + Cannot add a horizontal length constraint on an external geometry! Non è possibile aggiungere un vincolo di lunghezza orizzontale su una geometria esterna! @@ -1672,7 +1672,7 @@ Non è possibile aggiungere un vincolo di coordinata x fissa sull'origine! - + Cannot add a vertical length constraint on an external geometry! Non è possibile aggiungere un vincolo di lunghezza verticale su una geometria esterna! @@ -1690,18 +1690,18 @@ Non è possibile aggiungere un vincolo di coordinata y fissa sull'origine! - + Select two or more lines from the sketch. Seleziona due o più linee dello sketch. - + Select at least two lines from the sketch. Seleziona almeno due linee dello sketch. - + Select a valid line Seleziona una linea valida @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Seleziona una o due linee dallo sketch. - + Cannot add an angle constraint on an external geometry! Non è possibile aggiungere un vincolo di angolo su una geometria esterna! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Seleziona esattamente una o due linee dello sketch. - + Select two edges from the sketch. Seleziona due spigoli dello sketch. @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Non è consentito modificare il dato perché lo sketch contiene vincoli in conflitto - + + Dimensional constraint Vincolo di lunghezza @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle Inserire l'angolo + Angle: Angolo: + Insert radius Inserire il raggio + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: Raggio: - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length Inserire la lunghezza + Length: Lunghezza: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts index 818d6d0113..ae1a30cb8e 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ja.ts @@ -178,7 +178,7 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher @@ -196,7 +196,7 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher @@ -232,7 +232,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher @@ -254,7 +254,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher @@ -276,7 +276,7 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher @@ -294,7 +294,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher @@ -312,7 +312,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher @@ -330,7 +330,7 @@ CmdSketcherConstrainLock - + Sketcher Sketcher @@ -348,7 +348,7 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher @@ -388,7 +388,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher @@ -406,7 +406,7 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher @@ -424,7 +424,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher @@ -464,7 +464,7 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher @@ -482,7 +482,7 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher @@ -1284,21 +1284,21 @@ - - + + - - - + + + - - - + + + @@ -1317,10 +1317,10 @@ - + - - + + @@ -1364,7 +1364,7 @@ スケッチからエッジを選択（複数可） - + Select an edge from the sketch. スケッチからエッジを選択 @@ -1450,14 +1450,14 @@ - + - + Select vertexes from the sketch. スケッチから節点を選択してください - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1467,7 +1467,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1477,7 +1477,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1494,18 +1494,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1515,7 +1515,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1619,19 +1619,19 @@ スケッチから節点を2つだけ選択してください - + Select two or more vertexes from the sketch. Select two or more vertexes from the sketch. - + Select exactly one line or one point and one line or two points from the sketch. スケッチから1直線または1点と1直線または2点を選択してください - + Cannot add a length constraint on an external geometry! 外部形状に対して距離拘束を追加することはできません！ @@ -1641,21 +1641,21 @@ 軸に対して長さ拘束を追加することはできません！ - + Select exactly one point and one object from the sketch. スケッチから1点と1つのオブジェクトを選択してください - + - + Select exactly one line or up to two points from the sketch. スケッチから1直線または2つ以下の点を選択してください - + Cannot add a horizontal length constraint on an external geometry! 外部形状に対して水平距離拘束を追加することはできません！ @@ -1673,7 +1673,7 @@ 原点に対してX固定座標の拘束を追加することはできません！ - + Cannot add a vertical length constraint on an external geometry! 外部形状に対して垂直距離拘束を追加することはできません！ @@ -1691,18 +1691,18 @@ 原点に対してY固定座標の拘束を追加することはできません！ - + Select two or more lines from the sketch. スケッチから2本以上の直線を選択してください - + Select at least two lines from the sketch. スケッチから2本以上の直線を選択してください - + Select a valid line 有効な直線を選択してください @@ -1734,12 +1734,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1803,7 +1803,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c スケッチから直線を1本または2本選択してください - + Cannot add an angle constraint on an external geometry! 外部形状に対して角度拘束を追加することはできません！ @@ -1817,7 +1817,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c スケッチから直線を1本または2本だけ選択してください - + Select two edges from the sketch. スケッチから2本のエッジを選択してください @@ -1954,7 +1954,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c データムを編集できません。スケッチ拘束が他の拘束と矛盾しています。 - + + Dimensional constraint 寸法拘束 @@ -2057,45 +2058,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle Insert angle + Angle: 角度: + Insert radius Insert radius + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: 半径: - + Refractive index ratio @@ -2105,12 +2112,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length Insert length + Length: 長さ: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts index ac91d1de0e..5b94962a3e 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_nl.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher Schetsen @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher Schetsen @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Schetsen @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Schetsen @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher Schetsen @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Schetsen @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Schetsen @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher Schetsen @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher Schetsen @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Schetsen @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher Schetsen @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Schetsen @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher Schetsen @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher Schetsen @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ Selecteer rand(en) uit de schets. - + Select an edge from the sketch. Selecteer een rand van de schets. @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. Selecteer (hoek)punten van de schets. - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ Selecteer precies twee (hoek)punten van de schets. - + Select two or more vertexes from the sketch. Select two or more vertexes from the sketch. - + Select exactly one line or one point and one line or two points from the sketch. Selecteer precies één lijn of een punt en een lijn of twee punten uit de schets. - + Cannot add a length constraint on an external geometry! Cannot add a length constraint on an external geometry! @@ -1640,21 +1640,21 @@ Een lengtebeperking is niet mogelijk op een as! - + Select exactly one point and one object from the sketch. Selecteer exact één punt en één object uit de schets. - + - + Select exactly one line or up to two points from the sketch. Selecteer precies een lijn of tot twee punten uit de schets. - + Cannot add a horizontal length constraint on an external geometry! Cannot add a horizontal length constraint on an external geometry! @@ -1672,7 +1672,7 @@ Cannot add a fixed x-cootdinate constraint on the root point! - + Cannot add a vertical length constraint on an external geometry! Cannot add a vertical length constraint on an external geometry! @@ -1690,18 +1690,18 @@ Cannot add a fixed y-cootdinate constraint on the root point! - + Select two or more lines from the sketch. Selecteer twee of meer lijnen van de schets. - + Select at least two lines from the sketch. Kies tenminste twee lijnen van de schets. - + Select a valid line Selecteer een geldige lijn @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Selecteer één of twee lijnen van de schets. - + Cannot add an angle constraint on an external geometry! Cannot add an angle constraint on an external geometry! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Selecteer precies een of twee lijnen uit de schets. - + Select two edges from the sketch. Selecteer twee randen van de schets. @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Niet toegestaan ​​om de waarde te bewerken, omdat de schets conflicterende beperkingen bevat - + + Dimensional constraint Dimensionale beperking @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle Insert angle + Angle: Hoek: + Insert radius Insert radius + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: Straal: - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length Insert length + Length: Lengte: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_no.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_no.ts index 83ae703ad9..5d95d51c5d 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_no.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_no.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher Skisse @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher Skisse @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Skisse @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Skisse @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher Skisse @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Skisse @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Skisse @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher Skisse @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher Skisse @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Skisse @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher Skisse @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Skisse @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher Skisse @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher Skisse @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ Select edge(s) from the sketch. - + Select an edge from the sketch. Velg en kant i skissen. @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. Velg node i skissen. - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ Velg nøyaktig to noder i skissen. - + Select two or more vertexes from the sketch. Select two or more vertexes from the sketch. - + Select exactly one line or one point and one line or two points from the sketch. Select exactly one line or one point and one line or two points from the sketch. - + Cannot add a length constraint on an external geometry! Cannot add a length constraint on an external geometry! @@ -1640,21 +1640,21 @@ Cannot add a length constraint on an axis! - + Select exactly one point and one object from the sketch. Select exactly one point and one object from the sketch. - + - + Select exactly one line or up to two points from the sketch. Select exactly one line or up to two points from the sketch. - + Cannot add a horizontal length constraint on an external geometry! Cannot add a horizontal length constraint on an external geometry! @@ -1672,7 +1672,7 @@ Cannot add a fixed x-cootdinate constraint on the root point! - + Cannot add a vertical length constraint on an external geometry! Cannot add a vertical length constraint on an external geometry! @@ -1690,18 +1690,18 @@ Cannot add a fixed y-cootdinate constraint on the root point! - + Select two or more lines from the sketch. Select two or more lines from the sketch. - + Select at least two lines from the sketch. Select at least two lines from the sketch. - + Select a valid line Select a valid line @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select one or two lines from the sketch. - + Cannot add an angle constraint on an external geometry! Cannot add an angle constraint on an external geometry! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select exactly one or two lines from the sketch. - + Select two edges from the sketch. Select two edges from the sketch. @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Not allowed to edit the datum because the sketch contains conflicting constraints - + + Dimensional constraint Dimensional constraint @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle Insert angle + Angle: Vinkel: + Insert radius Insert radius + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: Radius: - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length Insert length + Length: Lengde: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts index 5e348b43b9..576dcabafd 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher Szkicownik @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher Szkicownik @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Szkicownik @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Szkicownik @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher Szkicownik @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Szkicownik @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Szkicownik @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher Szkicownik @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher Szkicownik @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Szkicownik @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher Szkicownik @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Szkicownik @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher Szkicownik @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher Szkicownik @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ Wybierz krawędź(ie) na szkicu - + Select an edge from the sketch. Wybierz krawędź ze szkicu. @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. Wybierz wierzchołki ze szkicu. - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ Wybierz dokładnie dwa wierzchołki ze szkicu. - + Select two or more vertexes from the sketch. Select two or more vertexes from the sketch. - + Select exactly one line or one point and one line or two points from the sketch. Wybierz dokładnie jedną linię lub jeden punkt i jedną linię lub dwa punkty ze szkicu. - + Cannot add a length constraint on an external geometry! Nie można dodać ograniczenia długości dla zewnętrznych geometrii! @@ -1640,21 +1640,21 @@ Nie można dodać ograniczenia długości osi! - + Select exactly one point and one object from the sketch. Zaznacz dokładnie jeden punkt i jeden obiekt na szkicu. - + - + Select exactly one line or up to two points from the sketch. Wybierz dokładnie jedną linię lub do dwa punkty ze szkicu. - + Cannot add a horizontal length constraint on an external geometry! Nie można dodać poziomego ograniczenia długości dla zewnętrznych geometrii! @@ -1672,7 +1672,7 @@ Nie można dodać ustalonego więzu wg współrzędnej x na punkcie bazowym! - + Cannot add a vertical length constraint on an external geometry! Nie można dodać pionowego ograniczenia długości dla zewnętrznych geometrii! @@ -1690,18 +1690,18 @@ Nie można dodać ustalonego więzu wg współrzędnej y na punkcie bazowym! - + Select two or more lines from the sketch. Wybierz dwie lub więcej linii ze szkicu. - + Select at least two lines from the sketch. Wybierz co najmniej dwie linie ze szkicu. - + Select a valid line Wybierz prawidłową linię @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Wybierz jeden lub dwa wiersze ze szkicu. - + Cannot add an angle constraint on an external geometry! Nie można dodać ograniczenia kąta dla zewnętrznych geometrii! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Wybierz dokładnie jedną lub dwie linie ze szkicu. - + Select two edges from the sketch. Zaznacz dwie krawędzie ze szkicu. @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Nie można edytować odniesienia, ponieważ schemat zawiera ograniczenia powodujące konflikt - + + Dimensional constraint Wiązanie wymiaru @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle Insert angle + Angle: Kąt: + Insert radius Insert radius + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: Promień: - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length Insert length + Length: Długość: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts index 33edba8833..8e09e6dfbe 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-BR.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher Esboço @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher Esboço @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Esboço @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Esboço @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher Esboço @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Esboço @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Esboço @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher Esboço @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher Esboço @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Esboço @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher Esboço @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Esboço @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher Esboço @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher Esboço @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ Selecione aresta(s) no esboço. - + Select an edge from the sketch. Selecione uma aresta do esboço. @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. Selecione vértices do esboço. - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ Selecione exatamente dois vértices do esboço. - + Select two or more vertexes from the sketch. Selecione dois ou mais vértices do esboço. - + Select exactly one line or one point and one line or two points from the sketch. Selecione exatamente uma linha ou um ponto e uma linha ou dois pontos no esboço. - + Cannot add a length constraint on an external geometry! Não é possível adicionar uma restrição de comprimento em uma geometria externa! @@ -1640,21 +1640,21 @@ Não é possível adicionar uma restrição de comprimento em um eixo! - + Select exactly one point and one object from the sketch. Selecione exatamente um ponto e um objeto no esboço. - + - + Select exactly one line or up to two points from the sketch. Selecione exatamente uma linha ou até dois pontos no esboço. - + Cannot add a horizontal length constraint on an external geometry! Não é possível adicionar uma restrição de comprimento horizontal em uma geometria externa! @@ -1672,7 +1672,7 @@ Não é possível adicionar uma restrição de coordenada X fixa sobre um ponto raiz! - + Cannot add a vertical length constraint on an external geometry! Não é possível adicionar uma restrição de comprimento vertical em uma geometria externa! @@ -1690,18 +1690,18 @@ Não é possível adicionar uma restrição de coordenada Y fixa sobre um ponto raiz! - + Select two or more lines from the sketch. Selecione duas ou mais linhas no esboço. - + Select at least two lines from the sketch. Selecione pelo menos duas linhas no esboço. - + Select a valid line Selecione uma linha válida @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Selecione uma ou duas linhas do esboço. - + Cannot add an angle constraint on an external geometry! Não é possível adicionar uma restrição de ângulo em uma geometria externa! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Selecione exatamente uma ou duas linhas no esboço. - + Select two edges from the sketch. Selecione duas arestas no esboço. @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Não é possível editar o dado porque o esboço contém restrições conflitantes - + + Dimensional constraint Restrição de dimensão @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle Insira o ângulo + Angle: Ângulo: + Insert radius Insira o raio + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: Raio: - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length Insira o comprimento + Length: Comprimento: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts index cf14fde3f4..c4c6a4e167 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher Sketcher @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ Selecionar aresta(s) a partir do esboço. - + Select an edge from the sketch. Selecione uma aresta do sketch. @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. Selecionar vértices a partir do sketch. - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ Selecionar exatamente dois vértices a partir do sketch. - + Select two or more vertexes from the sketch. Select two or more vertexes from the sketch. - + Select exactly one line or one point and one line or two points from the sketch. Selecione exatamente uma linha ou uma linha e um ponto ou dois pontos do desenho. - + Cannot add a length constraint on an external geometry! Não é possível adicionar uma restrição de ângulo a geometria externa! @@ -1640,21 +1640,21 @@ Cannot add a length constraint on an axis! - + Select exactly one point and one object from the sketch. Selecione exatamente um ponto e um objeto do esboço. - + - + Select exactly one line or up to two points from the sketch. Selecione exatamente uma linha ou até dois pontos do esboço. - + Cannot add a horizontal length constraint on an external geometry! Não é possível adicionar uma restrição de comprimento horizontal numa geometria externa! @@ -1672,7 +1672,7 @@ Cannot add a fixed x-cootdinate constraint on the root point! - + Cannot add a vertical length constraint on an external geometry! Não é possível adicionar uma restrição de comprimento vertical numa geometria externa! @@ -1690,18 +1690,18 @@ Cannot add a fixed y-cootdinate constraint on the root point! - + Select two or more lines from the sketch. Selecione duas ou mais linhas do esboço. - + Select at least two lines from the sketch. Selecione pelo menos duas linhas do esboço. - + Select a valid line Selecione uma linha válida @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Selecione uma ou duas linhas do sketch. - + Cannot add an angle constraint on an external geometry! Não é possível adicionar uma restrição de ângulo a geometria externa! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Selecione exatamente uma ou duas linhas do esboço. - + Select two edges from the sketch. Selecione duas arestas do esboço. @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Não é permitido editar o datum porque o desenho contém restrições em conflito - + + Dimensional constraint Restrição dimensional @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle Insert angle + Angle: Ângulo: + Insert radius Insert radius + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: Raio: - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length Insert length + Length: Comprimento: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts index 4c65908b86..ced67ce343 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher Sketcher @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ Selectati margini din schita. - + Select an edge from the sketch. Selectati o margine din schita. @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. Selectati varfuri din schita. - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ Selectati exact două varfuri din schita. - + Select two or more vertexes from the sketch. Select two or more vertexes from the sketch. - + Select exactly one line or one point and one line or two points from the sketch. Selectati exact o linie sau un punct si o linie sau două puncte din schita. - + Cannot add a length constraint on an external geometry! Nu pot adauga o constrangere de lungime pentru o geometrie externa! @@ -1640,21 +1640,21 @@ Nu se poate adauga o constrangere de lungime pentru o axa! - + Select exactly one point and one object from the sketch. Selectati exact un punct si un obiect din schita. - + - + Select exactly one line or up to two points from the sketch. Selectati exact o linie sau maxim doua puncte din schita. - + Cannot add a horizontal length constraint on an external geometry! Nu se poate adauga o constrangere de lungime pentru o geometrie externa! @@ -1672,7 +1672,7 @@ Nu se poate adauga o constrangere pe axa X pentru punctul de baza! - + Cannot add a vertical length constraint on an external geometry! Nu se poate adauga o constrangere verticala pentru o geometrie externa! @@ -1690,18 +1690,18 @@ Nu se poate adauga o constrangere pe axa Y pentru punctul de baza! - + Select two or more lines from the sketch. Selectati doua sau mai multe linii din schita. - + Select at least two lines from the sketch. Selectati cel putin doua linii din schita. - + Select a valid line Selectaţi o linie valida @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Selectati una sau două linii din schita. - + Cannot add an angle constraint on an external geometry! Nu pot adauga o constrangere de unghi pentru o geometrie externa! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Selectati exact una sau doua linii din schita. - + Select two edges from the sketch. Selectati doua margini din schita. @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Nu este permisa editarea datum-ului pentru ca schita contine conflicte de constrangeri - + + Dimensional constraint Constrangere dimensionala @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle Insert angle + Angle: Unghiul: + Insert radius Insert radius + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: Raza: - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length Insert length + Length: Lungime: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts index 11f9f8eb06..47172820d4 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher Эскизирование @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher Эскизирование @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Эскизирование @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Эскизирование @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher Эскизирование @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Эскизирование @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Эскизирование @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher Эскизирование @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher Эскизирование @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Эскизирование @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher Эскизирование @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Эскизирование @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher Эскизирование @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher Эскизирование @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ Выберите кромку(и) из эскиза. - + Select an edge from the sketch. Выбирите ребро в эскизе. @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. Выберите вершины из эскиза. - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ Выберите две вершины из эскиза. - + Select two or more vertexes from the sketch. Select two or more vertexes from the sketch. - + Select exactly one line or one point and one line or two points from the sketch. Выберите или один отрезок, или одну точку и один отрезок, или две точки из эскиза. - + Cannot add a length constraint on an external geometry! Не удается наложить ограничение длины к внешней геометрии! @@ -1640,21 +1640,21 @@ Не удается наложить ограничение длины на ось! - + Select exactly one point and one object from the sketch. Выберите одну точку и один объект эскиза. - + - + Select exactly one line or up to two points from the sketch. Выберите один отрезок или две точки эскиза. - + Cannot add a horizontal length constraint on an external geometry! Не удается наложить ограничение горизонтальный длины на внешнюю геометрию! @@ -1672,7 +1672,7 @@ Не удается добавить фиксированное ограничение по X на опорной точке! - + Cannot add a vertical length constraint on an external geometry! Не удается наложить ограничение вертикальной длины к внешней геометрии! @@ -1690,18 +1690,18 @@ Не удается добавить фиксированное ограничение по Y на опорной точке! - + Select two or more lines from the sketch. Выберите два или более отрезков эскиза. - + Select at least two lines from the sketch. Выберите по крайней мере два отрезка из эскиза. - + Select a valid line Выберите допустимый отрезок @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Выбрать одну или две линии в эскизе. - + Cannot add an angle constraint on an external geometry! Не удается наложить ограничение на угол к внешней геометрии! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Выберите один или два отрезка из эскиза. - + Select two edges from the sketch. Выберите две кромки эскиза. @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Не разрешается редактировать значение из-за конфликта условий - + + Dimensional constraint Ограничение размерами @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle Insert angle + Angle: Угол: + Insert radius Insert radius + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: Радиус: - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length Insert length + Length: Длина: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sk.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sk.ts index ade4db400f..b74d589bcb 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sk.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sk.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher Sketcher @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ Select edge(s) from the sketch. - + Select an edge from the sketch. Z náčrtu vybrať hrany. @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. Z náčrtu vybrať vrcholy. - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ Z náčrtu vybrať presne dva vrcholy. - + Select two or more vertexes from the sketch. Select two or more vertexes from the sketch. - + Select exactly one line or one point and one line or two points from the sketch. Select exactly one line or one point and one line or two points from the sketch. - + Cannot add a length constraint on an external geometry! Cannot add a length constraint on an external geometry! @@ -1640,21 +1640,21 @@ Cannot add a length constraint on an axis! - + Select exactly one point and one object from the sketch. Vyberte práve jeden bod a jeden objekt z náčrtku. - + - + Select exactly one line or up to two points from the sketch. Select exactly one line or up to two points from the sketch. - + Cannot add a horizontal length constraint on an external geometry! Cannot add a horizontal length constraint on an external geometry! @@ -1672,7 +1672,7 @@ Cannot add a fixed x-cootdinate constraint on the root point! - + Cannot add a vertical length constraint on an external geometry! Cannot add a vertical length constraint on an external geometry! @@ -1690,18 +1690,18 @@ Cannot add a fixed y-cootdinate constraint on the root point! - + Select two or more lines from the sketch. Select two or more lines from the sketch. - + Select at least two lines from the sketch. Select at least two lines from the sketch. - + Select a valid line Select a valid line @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select one or two lines from the sketch. - + Cannot add an angle constraint on an external geometry! Cannot add an angle constraint on an external geometry! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select exactly one or two lines from the sketch. - + Select two edges from the sketch. Select two edges from the sketch. @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Not allowed to edit the datum because the sketch contains conflicting constraints - + + Dimensional constraint Dimensional constraint @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle Insert angle + Angle: Uhol: + Insert radius Insert radius + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: Polomer: - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length Insert length + Length: Dĺžka: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts index ba568ae932..a070f3945c 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sv-SE.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher Skissare @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher Skissare @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Skissare @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Skissare @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher Skissare @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Skissare @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Skissare @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher Skissare @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher Skissare @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Skissare @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher Skissare @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Skissare @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher Skissare @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher Skissare @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ Välj kant(er) från skissen. - + Select an edge from the sketch. Välj en kant från skissen. @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. Välj hörnen från skissen. - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ Välj exakt två hörn från skissen. - + Select two or more vertexes from the sketch. Select two or more vertexes from the sketch. - + Select exactly one line or one point and one line or two points from the sketch. Välj exakt en linje eller en punkt och en linje eller två punkter från skissen. - + Cannot add a length constraint on an external geometry! Kan inte lägga till en längdbegränsning på en extern geometri! @@ -1640,21 +1640,21 @@ Kan inte lägga till längdbegränsning på en axel! - + Select exactly one point and one object from the sketch. Välj exakt en punkt och ett objekt från skissen. - + - + Select exactly one line or up to two points from the sketch. Välj exakt en linje eller upp till två punkter från skissen. - + Cannot add a horizontal length constraint on an external geometry! Kan inte lägga till en horisontell längdbegränsning på en extern geometri! @@ -1672,7 +1672,7 @@ Kan inte lägga till en fast x-koordinat begränsning på rotpunkten! - + Cannot add a vertical length constraint on an external geometry! Kan inte lägga till en vertikal längdbegränsning på en extern geometri! @@ -1690,18 +1690,18 @@ Kan inte lägga till en fast y-koordinat begränsning på rotpunkten! - + Select two or more lines from the sketch. Välj två eller flera linjer från skissen. - + Select at least two lines from the sketch. Välj åtminstone två linjer från skissen. - + Select a valid line Välj en giltig linje @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Välj en eller två linjer från skissen. - + Cannot add an angle constraint on an external geometry! Kan inte lägga till en vinkelbegränsning på en extern geometri! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Välj exakt en eller två linjer från skissen. - + Select two edges from the sketch. Välj två kanter från skissen. @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Inte tillåtet att ändra datum på grund av att skissen innehåller motstridiga begränsningar - + + Dimensional constraint Dimensionell begränsning @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle Insert angle + Angle: Vinkel: + Insert radius Insert radius + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: Radie: - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length Insert length + Length: Längd: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts index 7b014e5b4e..c77e844230 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher Taslakçı @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher Taslakçı @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Taslakçı @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Taslakçı @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher Taslakçı @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Taslakçı @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Taslakçı @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher Taslakçı @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher Taslakçı @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Taslakçı @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher Taslakçı @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Taslakçı @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher Taslakçı @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher Taslakçı @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ Select edge(s) from the sketch. - + Select an edge from the sketch. Taslaktan bir kenar seç @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. Select vertexes from the sketch. - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ Select exactly two vertexes from the sketch. - + Select two or more vertexes from the sketch. Select two or more vertexes from the sketch. - + Select exactly one line or one point and one line or two points from the sketch. Select exactly one line or one point and one line or two points from the sketch. - + Cannot add a length constraint on an external geometry! Cannot add a length constraint on an external geometry! @@ -1640,21 +1640,21 @@ Cannot add a length constraint on an axis! - + Select exactly one point and one object from the sketch. Select exactly one point and one object from the sketch. - + - + Select exactly one line or up to two points from the sketch. Select exactly one line or up to two points from the sketch. - + Cannot add a horizontal length constraint on an external geometry! Cannot add a horizontal length constraint on an external geometry! @@ -1672,7 +1672,7 @@ Cannot add a fixed x-cootdinate constraint on the root point! - + Cannot add a vertical length constraint on an external geometry! Cannot add a vertical length constraint on an external geometry! @@ -1690,18 +1690,18 @@ Cannot add a fixed y-cootdinate constraint on the root point! - + Select two or more lines from the sketch. Select two or more lines from the sketch. - + Select at least two lines from the sketch. Select at least two lines from the sketch. - + Select a valid line Select a valid line @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select one or two lines from the sketch. - + Cannot add an angle constraint on an external geometry! Cannot add an angle constraint on an external geometry! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select exactly one or two lines from the sketch. - + Select two edges from the sketch. Select two edges from the sketch. @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Not allowed to edit the datum because the sketch contains conflicting constraints - + + Dimensional constraint Dimensional constraint @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle Insert angle + Angle: Açı: + Insert radius Insert radius + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: Yarıçapı: - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length Insert length + Length: Uzunluk: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts index 170bf41084..cf2f103791 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher Створювач ескізів @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher Створювач ескізів @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Створювач ескізів @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Створювач ескізів @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher Створювач ескізів @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Створювач ескізів @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Створювач ескізів @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher Створювач ескізів @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher Створювач ескізів @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Створювач ескізів @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher Створювач ескізів @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Створювач ескізів @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher Створювач ескізів @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher Створювач ескізів @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ Select edge(s) from the sketch. - + Select an edge from the sketch. Виберіть ребро в ескізі. @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. Вибір вершин з ескізу. - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ Вибір рівно двох вершин з ескізу. - + Select two or more vertexes from the sketch. Select two or more vertexes from the sketch. - + Select exactly one line or one point and one line or two points from the sketch. Оберіть на ескізі лише одну лінію, або одну точку та одну лінію, або дві точки. - + Cannot add a length constraint on an external geometry! Cannot add a length constraint on an external geometry! @@ -1640,21 +1640,21 @@ Cannot add a length constraint on an axis! - + Select exactly one point and one object from the sketch. Оберіть на ескізі лише одну точку та один об'єкт. - + - + Select exactly one line or up to two points from the sketch. Оберіть на ескізі лише одну лінію або до двох точок. - + Cannot add a horizontal length constraint on an external geometry! Cannot add a horizontal length constraint on an external geometry! @@ -1672,7 +1672,7 @@ Cannot add a fixed x-cootdinate constraint on the root point! - + Cannot add a vertical length constraint on an external geometry! Cannot add a vertical length constraint on an external geometry! @@ -1690,18 +1690,18 @@ Cannot add a fixed y-cootdinate constraint on the root point! - + Select two or more lines from the sketch. Оберіть на ескізі дві або більше ліній. - + Select at least two lines from the sketch. Оберіть на ескізі принаймні дві лінії. - + Select a valid line Оберіть припустиму лінію @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select one or two lines from the sketch. - + Cannot add an angle constraint on an external geometry! Cannot add an angle constraint on an external geometry! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Select exactly one or two lines from the sketch. - + Select two edges from the sketch. Select two edges from the sketch. @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Not allowed to edit the datum because the sketch contains conflicting constraints - + + Dimensional constraint Dimensional constraint @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle Insert angle + Angle: Кут: + Insert radius Insert radius + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: Радіус: - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length Insert length + Length: Довжина: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts index 411a21b3b6..4cb7d7de8e 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher 草绘 @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher 草绘 @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher 草绘 @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher 草绘 @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher 草绘 @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher 草绘 @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher 草绘 @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher 草绘 @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher 草绘 @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher 草绘 @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher 草绘 @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher 草绘 @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher 草绘 @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher 草绘 @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ 从草绘选择边 - + Select an edge from the sketch. 从草绘中选择边. @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. 从草绘中选择顶点. - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ 仅从草绘中选择两个顶点. - + Select two or more vertexes from the sketch. Select two or more vertexes from the sketch. - + Select exactly one line or one point and one line or two points from the sketch. 仅从草绘选择一直线,或一点和一直线,或两点. - + Cannot add a length constraint on an external geometry! 无法在外部几何体上添加长度约束! @@ -1640,21 +1640,21 @@ 无法在坐标轴上添加长度约束! - + Select exactly one point and one object from the sketch. 仅从草绘选择一点和一对象. - + - + Select exactly one line or up to two points from the sketch. 从草图选择一根线或两个点. - + Cannot add a horizontal length constraint on an external geometry! 无法在外部几何体上添加水平长度约束! @@ -1672,7 +1672,7 @@ 不能在根顶点上添加x-坐标约束 - + Cannot add a vertical length constraint on an external geometry! 无法在外部几何体上添加垂直长度约束! @@ -1690,18 +1690,18 @@ 不能在根顶点上添加y-坐标约束 - + Select two or more lines from the sketch. 从草绘选择两条或两条以上直线. - + Select at least two lines from the sketch. 至少从草绘选择两直线. - + Select a valid line 选择一有效直线 @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 从草绘选取一根或两根直线. - + Cannot add an angle constraint on an external geometry! 无法在外部几何体上添加角度约束! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 仅从草绘选择一条或两条直线. - + Select two edges from the sketch. 从草绘选择两条边. @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 由于草图包含冲突的约束无法编辑基准 - + + Dimensional constraint 尺寸约束 @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle Insert angle + Angle: 角度: + Insert radius Insert radius + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: 半径: - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length Insert length + Length: 长度: diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts index 1c73b353da..b027b0d102 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts @@ -177,7 +177,7 @@ CmdSketcherConstrainAngle - + Sketcher Sketcher @@ -195,7 +195,7 @@ CmdSketcherConstrainCoincident - + Sketcher Sketcher @@ -231,7 +231,7 @@ CmdSketcherConstrainDistanceX - + Sketcher Sketcher @@ -253,7 +253,7 @@ CmdSketcherConstrainDistanceY - + Sketcher Sketcher @@ -275,7 +275,7 @@ CmdSketcherConstrainEqual - + Sketcher Sketcher @@ -293,7 +293,7 @@ CmdSketcherConstrainHorizontal - + Sketcher Sketcher @@ -311,7 +311,7 @@ CmdSketcherConstrainInternalAlignment - + Sketcher Sketcher @@ -329,7 +329,7 @@ CmdSketcherConstrainLock - + Sketcher Sketcher @@ -347,7 +347,7 @@ CmdSketcherConstrainParallel - + Sketcher Sketcher @@ -387,7 +387,7 @@ CmdSketcherConstrainPointOnObject - + Sketcher Sketcher @@ -405,7 +405,7 @@ CmdSketcherConstrainRadius - + Sketcher Sketcher @@ -423,7 +423,7 @@ CmdSketcherConstrainSnellsLaw - + Sketcher Sketcher @@ -463,7 +463,7 @@ CmdSketcherConstrainTangent - + Sketcher Sketcher @@ -481,7 +481,7 @@ CmdSketcherConstrainVertical - + Sketcher Sketcher @@ -1283,21 +1283,21 @@ - - + + - - - + + + - - - + + + @@ -1316,10 +1316,10 @@ - + - - + + @@ -1363,7 +1363,7 @@ 由素描選取邊緣 - + Select an edge from the sketch. 於素描中選擇邊緣 @@ -1449,14 +1449,14 @@ - + - + Select vertexes from the sketch. 由素描中選取頂點 - + Cannot add a fixed x-coordinate constraint on an external geometry! @@ -1466,7 +1466,7 @@ - + Cannot add a fixed y-coordinate constraint on an external geometry! @@ -1476,7 +1476,7 @@ - + Select one or more arcs or circles from the sketch. @@ -1493,18 +1493,18 @@ - + Select only entities from the sketch. - + Select one or two lines from the sketch. Or select two edges and a point. - + Parallel lines @@ -1514,7 +1514,7 @@ - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw @@ -1618,19 +1618,19 @@ 於素描中選擇兩頂點 - + Select two or more vertexes from the sketch. 從草圖中選取兩個或更多頂點 - + Select exactly one line or one point and one line or two points from the sketch. 由素描中選取一條線或一個點,以及一條線或兩個點 - + Cannot add a length constraint on an external geometry! 於外部幾何無法增加長度約束! @@ -1640,21 +1640,21 @@ 無法於軸上增加長度約束 - + Select exactly one point and one object from the sketch. 由素描中選取一個點和一個物件 - + - + Select exactly one line or up to two points from the sketch. 於素描中選取一條線或最多兩個點 - + Cannot add a horizontal length constraint on an external geometry! 於外部幾何無法增加水平長度約束! @@ -1672,7 +1672,7 @@ 無法於原始點上增加固定x座標約束 - + Cannot add a vertical length constraint on an external geometry! 於外部幾何無法增加垂直長度約束! @@ -1690,18 +1690,18 @@ 無法於原始點上增加固定y座標約束 - + Select two or more lines from the sketch. 由素描中選取兩條或以上線條 - + Select at least two lines from the sketch. 由素描中選取至少兩條線 - + Select a valid line 選取有效線條 @@ -1733,12 +1733,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Error - + With 3 objects, there must be 2 curves and 1 point. tangent constraint @@ -1802,7 +1802,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 於素描中選擇一或兩條線 - + Cannot add an angle constraint on an external geometry! 無法對外部幾何增加角度約束! @@ -1816,7 +1816,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 由素描中選取一或兩條線 - + Select two edges from the sketch. 由素描中選取兩個邊緣 @@ -1953,7 +1953,8 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c 因素描中含有相衝突約束,固無法允許編輯數據 - + + Dimensional constraint 尺度約束 @@ -2056,45 +2057,51 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog + Insert angle 嵌入角 + Angle: 角度： + Insert radius 嵌入半徑 + Refractive index ratio Constraint_SnellsLaw + Ratio n2/n1: Constraint_SnellsLaw - + Change radius - + + Radius: 半徑: - + Refractive index ratio @@ -2104,12 +2111,14 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + Insert length 嵌入長度 + Length: 長度: