From c65bf365a1beacd5e7285ea1892209158e317fc5 Mon Sep 17 00:00:00 2001 From: Yorik van Havre Date: Fri, 10 May 2019 19:15:33 -0300 Subject: [PATCH] Updated master translation files --- src/Gui/Language/FreeCAD.ts | 75 +- src/Mod/Arch/Resources/translations/Arch.ts | 1280 +++++++------ src/Mod/Draft/Resources/translations/Draft.ts | 1454 +++++++------- .../Gui/Resources/translations/Drawing.ts | 6 +- src/Mod/Fem/Gui/Resources/translations/Fem.ts | 190 +- .../Image/Gui/Resources/translations/Image.ts | 2 +- .../Mesh/Gui/Resources/translations/Mesh.ts | 6 + .../Path/Gui/Resources/translations/Path.ts | 1424 +++++++------- src/Mod/Plot/resources/translations/Plot.ts | 86 +- .../Gui/Resources/translations/Raytracing.ts | 126 +- .../translations/ReverseEngineering.ts | 4 +- .../Robot/Gui/Resources/translations/Robot.ts | 40 +- .../Gui/Resources/translations/Sketcher.ts | 1674 ++++++++--------- .../Gui/Resources/translations/Spreadsheet.ts | 10 +- .../Gui/Resources/translations/StartPage.ts | 14 +- .../Gui/Resources/translations/TechDraw.ts | 939 +++++++-- src/Mod/Web/Gui/Resources/translations/Web.ts | 35 +- 17 files changed, 4159 insertions(+), 3206 deletions(-) diff --git a/src/Gui/Language/FreeCAD.ts b/src/Gui/Language/FreeCAD.ts index 72cfd9200d..f161f94bc0 100644 --- a/src/Gui/Language/FreeCAD.ts +++ b/src/Gui/Language/FreeCAD.ts @@ -1243,10 +1243,6 @@ while doing a left or right click and move the mouse up or down Enable splash screen at start up - - Switch to tab of report window: - - Auto load module after start up: @@ -1267,10 +1263,6 @@ while doing a left or right click and move the mouse up or down Size of recent file list - - Window style: - - Size of toolbar icons: @@ -1622,6 +1614,53 @@ Specify another directory, please. &Close + + Find... + + + + + Gui::Dialog::DlgParameterFind + + Find + + + + Find what: + + + + Look at + + + + Groups + + + + Names + + + + Values + + + + Match whole string only + + + + Find Next + + + + Not found + + + + Can't find the text: %1 + + Gui::Dialog::DlgParameterImp @@ -2715,10 +2754,6 @@ Specify another directory, please. Gui commands - - Recording GUI commands - - Record as comment @@ -2735,6 +2770,10 @@ Specify another directory, please. Run macros in local environment + + Record GUI commands + + Gui::Dialog::DlgSettingsUnits @@ -2762,10 +2801,6 @@ Specify another directory, please. Unit - - User system: - - US customary (in/lb) @@ -2830,6 +2865,10 @@ Specify another directory, please. 1/128" + + Unit system: + + Gui::Dialog::DlgSettingsViewColor @@ -4520,11 +4559,11 @@ Do you want to specify another directory? - Translation Increment: + Translation Increment: - Rotation Increment: + Rotation Increment: diff --git a/src/Mod/Arch/Resources/translations/Arch.ts b/src/Mod/Arch/Resources/translations/Arch.ts index 67d1d98d64..34bbbdc2c0 100644 --- a/src/Mod/Arch/Resources/translations/Arch.ts +++ b/src/Mod/Arch/Resources/translations/Arch.ts @@ -3,27 +3,27 @@ App::Property - + The intervals between axes - + The angles of each axis - + The length of the axes - + The size of the axis bubbles - + The numbering style @@ -33,67 +33,57 @@ - + The base object this component is built upon - + The object this component is cloning - + Other shapes that are appended to this object - + Other shapes that are subtracted from this object - + An optional description for this component - + An optional tag for this component - - Custom IFC properties and attributes - - - - + A material for this object - - The role of this object - - - - + Specifies if this object must move together when its host is moved - + The area of all vertical faces of this object - + The area of the projection of this object onto the XY plane - + The perimeter length of the horizontal area @@ -123,7 +113,7 @@ - + The placement of this object @@ -153,152 +143,152 @@ - + The length of this element, if not based on a profile - + The width of this element, if not based on a profile - + The thickness or extrusion depth of this element - + The number of sheets to use - + The offset between this panel and its baseline - + The length of waves for corrugated elements - + The height of waves for corrugated elements - + The direction of waves for corrugated elements - + The type of waves for corrugated elements - + The area of this panel - + The facemaker type to use to build the profile of this object - + The normal extrusion direction of this object (keep (0,0,0) for automatic normal) - + The linked object - + The line width of the rendered objects - + The color of the panel outline - + The size of the tag text - + The color of the tag text - + The X offset of the tag text - + The Y offset of the tag text - + The font of the tag text - + The text to display. Can be %tag%, %label% or %description% to display the panel tag or label - + The position of the tag text. Keep (0,0,0) for center position - + The rotation of the tag text - + A margin inside the boundary - + Turns the display of the margin on/off - + The linked Panel cuts - + The tag text to display - + The width of the sheet - + The height of the sheet - + The fill ratio of this sheet @@ -358,7 +348,7 @@ - + The structural nodes of this element @@ -513,37 +503,37 @@ - + The diameter of the bar - + The distance between the border of the beam and the first bar (concrete cover). - + The distance between the border of the beam and the last bar (concrete cover). - + The amount of bars - + The spacing between the bars - + The direction to use to spread the bars. Keep (0,0,0) for automatic direction. - + The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. @@ -623,132 +613,132 @@ - + If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane - + The display height of this section plane - + The size of the arrows of this section plane - + Show the cut in the 3D view - + The rendering mode to use - + If cut geometry is shown or not - + If cut geometry is filled or not - + The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model - + The base terrain of this site - + The postal or zip code of this site - + The city of this site - + The country of this site - + The latitude of this site - + Angle between the true North and the North direction in this document - + The elevation of level 0 of this site - + The perimeter length of this terrain - + The volume of earth to be added to this terrain - + The volume of earth to be removed from this terrain - + An extrusion vector to use when performing boolean operations - + Remove splitters from the resulting shape - + Show solar diagram or not - + The scale of the solar diagram - + The position of the solar diagram - + The color of the solar diagram @@ -823,232 +813,232 @@ - + The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - + The name of the font - + The color of the area text - + The size of the text font - + The size of the first line of text - + The space between the lines of text - + The position of the text. Leave (0,0,0) for automatic position - + The justification of the text - + The number of decimals to use for calculated texts - + Show the unit suffix - + The length of these stairs, if no baseline is defined - + The width of these stairs - + The total height of these stairs - + The alignment of these stairs on their baseline, if applicable - + The number of risers in these stairs - + The depth of the treads of these stairs - + The height of the risers of these stairs - + The size of the nosing - + The thickness of the treads - + The type of landings of these stairs - + The type of winders in these stairs - + The type of structure of these stairs - + The thickness of the massive structure or of the stringers - + The width of the stringers - + The offset between the border of the stairs and the structure - + An optional extrusion path for this element - + The height or extrusion depth of this element. Keep 0 for automatic - + A description of the standard profile this element is based upon - + Offset distance between the centerline and the nodes line - + If the nodes are visible or not - + The width of the nodes line - + The size of the node points - + The color of the nodes line - + The type of structural node - + Axes systems this structure is built on - + The element numbers to exclude when this structure is based on axes - + If true the element are aligned with axes - + The length of this wall. Not used if this wall is based on an underlying object - + The width of this wall. Not used if this wall is based on a face - + The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - + The alignment of this wall on its base object, if applicable - + The face number of the base object used to build this wall - + The offset between this wall and its baseline (only for left and right alignments) - + The normal direction of this window - + The area of this window - + An optional higher-resolution mesh or shape for this object @@ -1058,87 +1048,87 @@ - + Opens the subcomponents that have a hinge defined - + A standard code (MasterFormat, OmniClass,...) - + A description for this material - + The transparency value of this material - + The color of this material - + The list of layer names - + The list of layer materials - + The list of layer thicknesses - + The line color of the projected objects - + The color of the cut faces (if turned on) - + The overlap of the stringers above the bottom of the treads - + The number of the wire that defines the hole. A value of 0 means automatic - + The label of each axis - + If true, show the labels - + A transformation to apply to each label - + The axes this system is made of - + An optional axis or axis system on which this object should be duplicated @@ -1153,57 +1143,57 @@ - + If True, the object is rendered as a face, if possible. - + The allowed angles this object can be rotated to when placed on sheets - + Specifies an angle for the wood grain (Clockwise, 0 is North) - + Specifies the scale applied to each panel view. - + A list of possible rotations for the nester - + Turns the display of the wood grain texture on/off - + The total distance to span the rebars over. Keep 0 to automatically use the host shape size. - + List of placement of all the bars - + The structure object that hosts this rebar - + The custom spacing of rebar - + Shape of rebar @@ -1213,152 +1203,147 @@ - + Shows plan opening symbols if available - + Show elevation opening symbols if available - + The objects that host this window - + An optional custom bubble number - + The type of line to draw this axis - + Where to add bubbles to this axis: Start, end, both or none - + The line width to draw this axis - + The color of this axis - + The number of the first axis - + The font to use for texts - + The font size - + The placement of this axis system - + The level of the (0,0,0) point of this level - + The shape of this object - - Stores IFC properties - - - - + The line width of this object - + An optional unit to express levels - + A transformation to apply to the level mark - + If true, show the level - + If true, show the unit on the level tag - + If true, when activated, the working plane will automatically adapt to this level - + If true, when activated, Display offset will affect the origin mark too - + If true, when activated, the object's label is displayed - + The font to be used for texts - + The font size of texts - + Camera position data associated with this object - + If set, the view stored in this object will be restored on double-click - + The individual face colors - + If set to True, the working plane will be kept on Auto mode - + An optional standard (OmniClass, etc...) code for this component @@ -1368,42 +1353,37 @@ - + A URL where to find information about this material - + The horizontal offset of waves for corrugated elements - + If the wave also affects the bottom side or not - - The position of the tag text. Keep (0,0,0) for center position - - - - + The font file - + An offset value to move the cut plane from the center point - + Length of a single rebar - + Total length of all rebars @@ -1433,42 +1413,42 @@ - + The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object - + The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) - + The street and house number of this site, with postal box or apartment number if needed - + The region, province or county of this site - + A url that shows this site in a mapping website - + An optional offset between the model (0,0,0) origin and the point indicated by the geocoordinates @@ -1478,260 +1458,355 @@ - + The width of a Landing (Second edge and after - First edge follows Width property) - + The Blondel ratio indicates comfortable stairs and should be between 62 and 64cm or 24.5 and 25.5in - + The depth of the landing of these stairs - + The depth of the treads of these stairs - Enforced regardless of Length or edge's Length - + The height of the risers of these stairs - Enforced regardless of Height or edge's Height - + The direction of flight after landing - + The 'absolute' top level of a flight of stairs leads to - + The 'left outline' of stairs - + The 'left outline' of all segments of stairs - + Enable this to make the wall generate blocks - + The length of each block - + The height of each block - + The horizontal offset of the first line of blocks - + The horizontal offset of the second line of blocks - + The size of the joints between each block - + The number of entire blocks - + The number of broken blocks - + The components of this window - + The depth of the hole that this window makes in its host object. If 0, the value will be calculated automatically. - + An optional object that defines a volume to be subtracted from hosts of this window - + The width of this window - + The height of this window - + The preset number this window is based on - + The frame size of this window - + The offset size of this window - + The width of louvre elements - + The space between louvre elements - + The number of the wire that defines the hole. If 0, the value will be calculated automatically + + + Specifies if moving this object moves its base instead + + + + + A single section of the fence + + + + + A single fence post + + + + + The Path the fence should follow + + + + + The number of sections the fence is built of + + + + + The number of posts used to build the fence + + + + + The type of this object + + + + + IFC data + + + + + IFC properties of this object + + + + + Description of IFC attributes are not yet implemented + + + + + If True, resulting views will be clipped to the section plane area. + + + + + If true, the color of the objects material will be used to fill cut areas. + + + + + When set to 'True North' the whole geometry will be rotated to match the true north of this site + + + + + Show compass or not + + + + + The rotation of the Compass relative to the Site + + + + + The position of the Compass relative to the Site placement + + + + + Update the Declination value based on the compass rotation + + + + + The thickness of the risers + + + + + The 'right outline' of all segments of stairs + + Arch - + Components - + Components of this object - + Axes - + Create Axis - + Remove - + Add - + Axis - + Distance - + Angle - + is not closed - + is not valid - + doesn't contain any solid - + contains a non-closed solid - + contains faces that are not part of any solid - + Grouping - + Ungrouping - + Split Mesh - + Mesh to Shape - + Base component - + Additions - + Subtractions - + Objects - + Roof @@ -1746,7 +1821,7 @@ - + Page @@ -1756,12 +1831,12 @@ - + Create Section Plane - + Create Site @@ -1771,7 +1846,7 @@ - + Create Wall @@ -1786,57 +1861,57 @@ - + Error: Invalid base object - + This mesh is an invalid solid - + Create Window - + Edit - + Create/update component - + Base 2D object - + Wires - + Create new component - + Name - + Type - + Thickness @@ -1851,12 +1926,12 @@ - + Add space boundary - + Remove space boundary @@ -1866,7 +1941,7 @@ - + Fixtures @@ -1881,7 +1956,7 @@ - + Create Rebar @@ -1891,7 +1966,7 @@ - + Create Stairs @@ -1901,37 +1976,37 @@ - + Error: The base shape couldn't be extruded along this tool object - + Couldn't compute a shape - + Merge Wall - + Please select only wall objects - + Merge Walls - + Distances (mm) and angles (deg) between axes - + Error computing the shape of this object @@ -1941,32 +2016,32 @@ - + Object doesn't have settable IFC Attributes - + Disabling Brep force flag of object - + Enabling Brep force flag of object - + has no solid - + has an invalid shape - + has a null shape @@ -2016,7 +2091,7 @@ - + Parameters of the profiles of the roof: * Angle : slope in degrees compared to the horizontal one. * Run : outdistance between the wall and the ridge sheathing. @@ -2031,30 +2106,15 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela - + Id - + IdRel - - - CutVolume - - - - - CutPlane - - - - - PreviewCutVolume - - Cut Plane @@ -2076,32 +2136,32 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela - + Angle (deg) - + Run (mm) - + Thickness (mm) - + Overhang (mm) - + Height (mm) - + Create Component @@ -2116,32 +2176,32 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela - + Set text position - + Category - + Key - + Value - + Unit - + Create IFC properties spreadsheet @@ -2151,7 +2211,7 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela - + Group @@ -2161,27 +2221,27 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela - + Create Panel Cut - + Create Panel Sheet - + Facemaker returned an error - + Tools - + Edit views positions @@ -2326,109 +2386,109 @@ If Run = 0 then Run is calculated so that the height is the same one as the rela - + Offset - + Unable to retrieve value from object - + Import CSV File - + Export CSV File - + Schedule - + There is no valid object in the selection. Site creation aborted. - + Node Tools - + Reset nodes - + Edit nodes - + Extend nodes - + Extends the nodes of this element to reach the nodes of another element - + Connect nodes - + Connects nodes of this element with the nodes of another element - + Toggle all nodes - + Toggles all structural nodes of the document on/off - + Intersection found. - + Door - + Hinge - + Opening mode - + Get selected edge - + Press to retrieve the selected edge @@ -2448,12 +2508,12 @@ Site creation aborted. - + Material - + New layer @@ -2463,198 +2523,190 @@ Site creation aborted. - + Hole wire - + Pick selected - + Create Axis System - + Create Grid - + Label - + Axis system components - + Grid - + Total width - + Total height - + Add row - + Del row - + Add col - + Del col - + Create span - + Remove span - + Rows - + Columns - + This object has no face - + Space boundaries - + Error: Unable to modify the base object of this wall - + Window elements - + Survey - + Set description - + Clear - + Copy Length - + Copy Area - + Export CSV - + Description - + Area - + Total - + Hosts - + Only axes must be selected - + Please select at least one axis - + Auto height is larger than height - + Total row size is larger than height - + Auto width is larger than width - + Total column size is larger than width - - - You can put anything but Site and Building object in a Building object. -Building object is not allowed to accept Site and Building object. -Site and Building objects will be removed from the selection. -You can change that in the preferences. - - There is no valid object in the selection. @@ -2672,72 +2724,72 @@ Building creation aborted. - + Invalid cutplane - + All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: - + Toggle subcomponents - + Closing Sketch edit - + Component - + Edit IFC properties - + Edit standard code - + Property - + Add property... - + Add property set... - + New... - + New property - + New property set @@ -2761,7 +2813,7 @@ Floor creation aborted. - + Error computing shape of @@ -2846,7 +2898,7 @@ Floor creation aborted. - + Please select a base face on a structural object @@ -2861,47 +2913,47 @@ Floor creation aborted. - + Section plane settings - + Objects seen by this section plane: - + Section plane placement: - + Rotate X - + Rotate Y - + Rotate Z - + Resize - + Center - + Please either select only Building objects or nothing at all! Site is not allowed to accept any other object besides Building. Other objects will be removed from the selection. @@ -2909,77 +2961,72 @@ Note: You can change that in the preferences. - + Choose another Structure object: - + The chosen object is not a Structure - + The chosen object has no structural nodes - + One of these objects has more than 2 nodes - + Unable to find a suitable intersection point - + Intersection found. - + The selected wall contains no subwall to merge - - Error computing block cuts for wall - - - - + Cannot compute blocks for wall - + Choose a face on an existing object or select a preset - + Unable to create component - + The number of the wire that defines a hole in the host object. A value of zero will automatically adopt the largest wire - + + default - + If this is checked, the default Frame value of this window will be added to the value entered here - + If this is checked, the default Offset value of this window will be added to the value entered here @@ -3038,6 +3085,54 @@ Note: You can change that in the preferences. Successfully imported + + + You can put anything but Site and Building objects in a Building object. +Building object is not allowed to accept Site and Building objects. +Site and Building objects will be removed from the selection. +You can change that in the preferences. + + + + + Remove highlighted objects from the list above + + + + + Add selected + + + + + Add selected object(s) to the scope of this section plane + + + + + Rotates the plane along the X axis + + + + + Rotates the plane along the Y axis + + + + + Rotates the plane along the Z axis + + + + + Resizes the plane to fit the objects in the list above + + + + + Centers the plane on the objects in the list above + + ArchMaterial @@ -3158,12 +3253,12 @@ Note: You can change that in the preferences. Arch_Add - + Add component - + Adds the selected components to the active object @@ -3171,22 +3266,22 @@ Note: You can change that in the preferences. Arch_Axis - + Axis - + Grid - + Creates a customizable grid object - + Creates a set of axes @@ -3194,12 +3289,12 @@ Note: You can change that in the preferences. Arch_AxisSystem - + Axis System - + Creates an axis system from a set of axes @@ -3207,7 +3302,7 @@ Note: You can change that in the preferences. Arch_AxisTools - + Axis tools @@ -3241,17 +3336,17 @@ Note: You can change that in the preferences. Arch_Check - + Check - + Checks the selected objects for problems - + Explore the contents of an IFC file @@ -3259,12 +3354,12 @@ Note: You can change that in the preferences. Arch_CloneComponent - + Clone component - + Clones an object as an undefined architectural component @@ -3272,12 +3367,12 @@ Note: You can change that in the preferences. Arch_CloseHoles - + Close holes - + Closes holes in open shapes, turning them solids @@ -3285,12 +3380,12 @@ Note: You can change that in the preferences. Arch_Component - + Component - + Creates an undefined architectural component @@ -3321,6 +3416,19 @@ Note: You can change that in the preferences. + + Arch_Fence + + + Fence + + + + + Creates a fence object from a selected section, post and path + + + Arch_Floor @@ -3350,62 +3458,62 @@ Note: You can change that in the preferences. Arch_Grid - + The number of rows - + The number of columns - + The sizes for rows - + The sizes of columns - + The span ranges of cells that are merged together - + The type of 3D points produced by this grid object - + The total width of this grid - + The total height of this grid - + Creates automatic column divisions (set to 0 to disable) - + Creates automatic row divisions (set to 0 to disable) - + When in edge midpoint mode, if this grid must reorient its children along edge normals or not - + The indices of faces to hide @@ -3413,7 +3521,7 @@ Note: You can change that in the preferences. Arch_IfcExplorer - + Ifc Explorer @@ -3421,12 +3529,12 @@ Note: You can change that in the preferences. Arch_IfcSpreadsheet - + Create IFC spreadsheet... - + Creates a spreadsheet to store IFC properties of an object. @@ -3447,7 +3555,7 @@ Note: You can change that in the preferences. Arch_MaterialTools - + Material tools @@ -3455,12 +3563,12 @@ Note: You can change that in the preferences. Arch_MergeWalls - + Merge Walls - + Merges the selected walls, if possible @@ -3468,12 +3576,12 @@ Note: You can change that in the preferences. Arch_MeshToShape - + Mesh to Shape - + Turns selected meshes into Part Shape objects @@ -3494,12 +3602,12 @@ Note: You can change that in the preferences. Arch_Nest - + Nest - + Nests a series of selected shapes in a container @@ -3520,7 +3628,7 @@ Note: You can change that in the preferences. Arch_PanelTools - + Panel tools @@ -3528,7 +3636,7 @@ Note: You can change that in the preferences. Arch_Panel_Cut - + Panel Cut @@ -3536,17 +3644,17 @@ Note: You can change that in the preferences. Arch_Panel_Sheet - + Creates 2D views of selected panels - + Panel Sheet - + Creates a 2D sheet which can contain panel cuts @@ -3588,12 +3696,12 @@ Note: You can change that in the preferences. Arch_Rebar - + Creates a Reinforcement bar from the selected face of a structural object - + Custom Rebar @@ -3614,12 +3722,12 @@ Note: You can change that in the preferences. Arch_Remove - + Remove component - + Remove the selected components from their parents, or create a hole in a component @@ -3627,12 +3735,12 @@ Note: You can change that in the preferences. Arch_RemoveShape - + Remove Shape from Arch - + Removes cubic shapes from Arch components @@ -3666,12 +3774,12 @@ Note: You can change that in the preferences. Arch_SectionPlane - + Section Plane - + Creates a section plane object, including the selected objects @@ -3679,12 +3787,12 @@ Note: You can change that in the preferences. Arch_SelectNonSolidMeshes - + Select non-manifold meshes - + Selects all non-manifold meshes from the document or from the selected groups @@ -3692,12 +3800,12 @@ Note: You can change that in the preferences. Arch_Site - + Site - + Creates a site object including selected objects. @@ -3715,7 +3823,7 @@ Note: You can change that in the preferences. - + Creates a stairs object @@ -3723,12 +3831,12 @@ Note: You can change that in the preferences. Arch_SplitMesh - + Split Mesh - + Splits selected meshes into independent components @@ -3736,7 +3844,7 @@ Note: You can change that in the preferences. Arch_Stairs - + Stairs @@ -3757,12 +3865,12 @@ Note: You can change that in the preferences. Arch_Survey - + Survey - + Starts survey @@ -3770,12 +3878,12 @@ Note: You can change that in the preferences. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag - + Force an object to be exported as Brep or not @@ -3783,12 +3891,12 @@ Note: You can change that in the preferences. Arch_ToggleSubs - + Toggle subcomponents - + Shows or hides the subcomponents of this object @@ -3809,12 +3917,12 @@ Note: You can change that in the preferences. Arch_Window - + Window - + Creates a window object from a selected object (wire, rectangle or sketch) @@ -4084,7 +4192,7 @@ Note: You can change that in the preferences. Draft - + Writing camera position @@ -4310,27 +4418,27 @@ Note: You can change that in the preferences. - + 2D rendering - + Show debug information during 2D rendering - + Show renderer debug messages - + Cut areas line thickness ratio - + Specifies how many times the viewed line thickness must be applied to cut lines @@ -4410,42 +4518,42 @@ Note: You can change that in the preferences. - + Mesh to Shape Conversion - + If this is checked, conversion is faster but the result might still contain triangulated faces - + Fast conversion - + Tolerance: - + If this is checked, flat groups of faces will be force-flattened, resulting in possible gaps and non-solid results - + Force flat faces - + If this is checked, holes in faces will be performed by subtraction rather than using wires orientation - + Cut method @@ -4515,7 +4623,7 @@ Note: You can change that in the preferences. - + Transparency: @@ -4525,12 +4633,12 @@ Note: You can change that in the preferences. - + This is the SVG stroke-dasharray property to apply to projections of hidden objects. - + 30, 10 @@ -4565,22 +4673,22 @@ Note: You can change that in the preferences. - + Bim server - + Address - + The URL of a bim server instance (www.bimserver.org) to connect to. - + http://localhost:8082 @@ -4875,37 +4983,37 @@ Note: You can change that in the preferences. - + Symbol line thickness ratio - + Pattern scale - + Scaling factor for patterns used by object that have a Footprint display mode - + Open in external browser - + Survey - + If this is checked, the text that gets placed in the clipboard will include the unit. Otherwise, it will be a simple number expressed in internal units (millimeters) - + Include unit when sending measurements to clipboard @@ -4945,12 +5053,12 @@ Note: You can change that in the preferences. - + Hidden geometry pattern - + Tolerance value to use when checking if 2 adjacent faces as planar @@ -5005,7 +5113,7 @@ Note: You can change that in the preferences. - + If this is checked, the "Open BimServer in browser" button will open the Bim Server interface in an external browser instead of the FreeCAD web workbench @@ -5044,6 +5152,76 @@ Note: You can change that in the preferences. Disable IfcRectangleProfileDef + + + Set "Move base" property to True by default + + + + + IFC version + + + + + The IFC version will change which attributes and products are supported + + + + + IFC4 + + + + + IFC2X3 + + + + + Spaces + + + + + Line style: + + + + + Solid + + + + + Dashed + + + + + Dotted + + + + + Dashdot + + + + + Line color + + + + + Some IFC types such as IfcWall or IfcBeam have special standard versions like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. + + + + + Auto-detet and export as standard cases when applicable + + Workbench diff --git a/src/Mod/Draft/Resources/translations/Draft.ts b/src/Mod/Draft/Resources/translations/Draft.ts index bac6b7c8e1..1dd6773bb6 100755 --- a/src/Mod/Draft/Resources/translations/Draft.ts +++ b/src/Mod/Draft/Resources/translations/Draft.ts @@ -3,810 +3,792 @@ App::Property - + Defines a hatch pattern - + Sets the size of the pattern - + Startpoint of dimension - + Endpoint of dimension - + Point through which the dimension line passes - + The object measured by this dimension - + The geometry this dimension is linked to - + The measurement of this dimension - + For arc/circle measurements, false = radius, true = diameter - + Font size - + The number of decimals to show - + Arrow size - + The spacing between the text and the dimension line - + Arrow type - + Font name - + Line width - + Line color - + Length of the extension lines - + Rotate the dimension arrows 180 degrees - + Rotate the dimension text 180 degrees - + Show the unit suffix - + The position of the text. Leave (0,0,0) for automatic position - + Text override. Use $dim to insert the dimension length - + A unit to express the measurement. Leave blank for system default - + Start angle of the dimension - + End angle of the dimension - + The center point of this dimension - + The normal direction of this dimension - + Text override. Use 'dim' to insert the dimension length - + Length of the rectangle - + Radius to use to fillet the corners - + Size of the chamfer to give to the corners - + Create a face - + Defines a texture image (overrides hatch patterns) - + Start angle of the arc - + End angle of the arc (for a full circle, give it same value as First Angle) - + Radius of the circle - + The minor radius of the ellipse - + The major radius of the ellipse - + The vertices of the wire - + If the wire is closed or not - + The start point of this line - + The end point of this line - + The length of this line - + Create a face if this object is closed - + The number of subdivisions of each edge - - Displays a dim symbol at the end of the wire - - - - + Number of faces - + Radius of the control circle - + How the polygon must be drawn from the control circle - + Projection direction - + The width of the lines inside this object - + The size of the texts inside this object - + The spacing between lines of text - + The color of the projected objects - + The linked object - + Shape Fill Style - + Line Style - + If checked, source objects are displayed regardless of being visible in the 3D model - + Create a face if this spline is closed - + Parameterization factor - + The points of the Bezier curve - + The degree of the Bezier function - + Continuity - + If the Bezier curve should be closed or not - + Create a face if this curve is closed - + The components of this block - + The base object this 2D view must represent - + The projection vector of this object - + The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode - + Show hidden lines - + The base object that must be duplicated - + The type of array to create - + The axis direction - + Number of copies in X direction - + Number of copies in Y direction - + Number of copies in Z direction - + Number of copies - + Distance and orientation of intervals in X direction - + Distance and orientation of intervals in Y direction - + Distance and orientation of intervals in Z direction - + Distance and orientation of intervals in Axis direction - + Center point - + Angle to cover with copies - + Specifies if copies must be fused (slower) - + The path object along which to distribute objects - + Selected subobjects (edges) of PathObj - + Optional translation vector - + Orientation of Base along path - + X Location - + Y Location - + Z Location - + Text string - + Font file name - + Height of text - + Inter-character spacing - + Linked faces - + Specifies if splitter lines must be removed - + An optional extrusion value to be applied to all faces - + Height of the rectangle - + Horizontal subdivisions of this rectangle - + Vertical subdivisions of this rectangle - + The placement of this object - + The display length of this section plane - + The size of the arrows of this section plane - + For Cutlines and Cutfaces modes, this leaves the faces at the cut location - + The base object is the wire, it's formed from 2 objects - + The tool object is the wire, it's formed from 2 objects - + The length of the straight segment - + The point indicated by this label - + The points defining the label polyline - + The direction of the straight segment - + The type of information shown by this label - + The target object of this label - + The text to display when type is set to custom - + The text displayed by this label - + The size of the text - + The font of the text - + The size of the arrow - + The vertical alignment of the text - + The type of arrow of this label - + The type of frame around the text of this object - + Text color - + The maximum number of characters on each line of the text box - + The distance the dimension line is extended past the extension lines - + Length of the extension line above the dimension line - + The points of the B-spline - + If the B-spline is closed or not - + Tessellate Ellipses and B-splines into line segments - + Length of line segments if tessellating Ellipses or B-splines into line segments - + If this is True, this object will be recomputed only if it is visible - + Base - + PointList - + Count - + The objects included in this clone - + The scale factor of this clone - + If this clones several objects, this specifies if the result is a fusion or a compound - + This specifies if the shapes sew - + Display a leader line or not - + The text displayed by this object - + Line spacing (relative to font size) + + + The area of this object + + + + + Displays a Dimension symbol at the end of the wire + + + + + Fuse wall and structure objects of same type and material + + Draft - + Slope - - Download of dxf libraries failed. -Please download and install them manually. -See complete instructions at -http://www.freecadweb.org/wiki/Dxf_Importer_Install - - - - + Scale - + Writing camera position - + Writing objects shown/hidden state - + X factor - + Y factor - + Z factor - + Uniform scaling - + Working plane orientation - - Result - - - - - Create a clone - - - - - Modify original - - - - - Create a copy - - - - + Download of dxf libraries failed. Please install the dxf Library addon manually from menu Tools -> Addon Manager - + This Wire is already flat - + Pick from/to points - + Slope to give selected Wires/Lines: 0 = horizontal, 1 = 45deg up, -1 = 45deg down @@ -819,55 +801,70 @@ from menu Tools -> Addon Manager - + Text to be made into ShapeString - + String - + Height - + Height of the result - + X - + Y - + Z - + Font file + + + Enter coordinates or select point with mouse. + + + + + Reset 3d point selection + + + + + Reset Point + + Draft_AddConstruction - + Add to Construction group - + Adds the selected objects to the Construction group @@ -875,12 +872,12 @@ from menu Tools -> Addon Manager Draft_AddPoint - + Add Point - + Adds a point to an existing Wire or B-spline @@ -888,12 +885,12 @@ from menu Tools -> Addon Manager Draft_AddToGroup - + Move to group... - + Moves the selected object(s) to an existing group @@ -901,12 +898,12 @@ from menu Tools -> Addon Manager Draft_ApplyStyle - + Apply Current Style - + Applies current line width and color to selected objects @@ -914,25 +911,46 @@ from menu Tools -> Addon Manager Draft_Arc - + Arc - - Creates an arc. CTRL to snap, SHIFT to constrain + + Creates an arc by center point and radius. CTRL to snap, SHIFT to constrain + + + + + Draft_ArcTools + + + Arc tools + + + + + Draft_Arc_3Points + + + Arc 3 points + + + + + Creates an arc by 3 points Draft_Array - + Array - + Creates a polar or rectangular array from a selected object @@ -940,12 +958,12 @@ from menu Tools -> Addon Manager Draft_AutoGroup - + AutoGroup - + Select a group to automatically add all Draft & Arch objects to @@ -953,12 +971,12 @@ from menu Tools -> Addon Manager Draft_BSpline - + B-spline - + Creates a multiple-point B-spline. CTRL to snap, SHIFT to constrain @@ -966,25 +984,33 @@ from menu Tools -> Addon Manager Draft_BezCurve - + BezCurve - + Creates a Bezier curve. CTRL to snap, SHIFT to constrain + + Draft_BezierTools + + + Bezier tools + + + Draft_Circle - + Circle - + Creates a circle. CTRL to snap, ALT to select tangent objects @@ -992,12 +1018,12 @@ from menu Tools -> Addon Manager Draft_Clone - + Clone - + Clones the selected object(s) @@ -1005,25 +1031,39 @@ from menu Tools -> Addon Manager Draft_CloseLine - + Close Line - + Closes the line being drawn + + Draft_CubicBezCurve + + + CubicBezCurve + + + + + Creates a Cubic Bezier curve +Click and drag to define control points. CTRL to snap, SHIFT to constrain + + + Draft_DelPoint - + Remove Point - + Removes a point from an existing Wire or B-spline @@ -1031,12 +1071,12 @@ from menu Tools -> Addon Manager Draft_Dimension - + Dimension - + Creates a dimension. CTRL to snap, SHIFT to constrain, ALT to select a segment @@ -1044,12 +1084,12 @@ from menu Tools -> Addon Manager Draft_Downgrade - + Downgrade - + Explodes the selected objects into simpler objects, or subtracts faces @@ -1057,12 +1097,12 @@ from menu Tools -> Addon Manager Draft_Draft2Sketch - + Draft to Sketch - + Convert bidirectionally between Draft and Sketch objects @@ -1070,12 +1110,12 @@ from menu Tools -> Addon Manager Draft_Drawing - + Drawing - + Puts the selected objects on a Drawing sheet @@ -1083,25 +1123,43 @@ from menu Tools -> Addon Manager Draft_Edit - + Edit - + Edits the active object + + Draft_Edit_Improved + + + Edit Improved + + + + + Edits the selected objects + + + + + Select an object to edit + + + Draft_Ellipse - + Ellipse - + Creates an ellipse. CTRL to snap @@ -1109,12 +1167,12 @@ from menu Tools -> Addon Manager Draft_Facebinder - + Facebinder - + Creates a facebinder object from selected face(s) @@ -1122,12 +1180,12 @@ from menu Tools -> Addon Manager Draft_FinishLine - + Finish line - + Finishes a line without closing it @@ -1135,12 +1193,12 @@ from menu Tools -> Addon Manager Draft_FlipDimension - + Flip Dimension - + Flip the normal direction of a dimension @@ -1148,12 +1206,12 @@ from menu Tools -> Addon Manager Draft_Heal - + Heal - + Heal faulty Draft objects saved from an earlier FreeCAD version @@ -1161,12 +1219,12 @@ from menu Tools -> Addon Manager Draft_Join - + Join - + Joins two wires together @@ -1174,12 +1232,12 @@ from menu Tools -> Addon Manager Draft_Label - + Label - + Creates a label, optionally attached to a selected object or element @@ -1200,12 +1258,12 @@ from menu Tools -> Addon Manager Draft_Mirror - + Mirror - + Mirrors the selected objects along a line defined by two points @@ -1213,25 +1271,25 @@ from menu Tools -> Addon Manager Draft_Move - + Move - - Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain, ALT to copy + + Moves the selected objects between 2 points. CTRL to snap, SHIFT to constrain Draft_Offset - + Offset - + Offsets the active object. CTRL to snap, SHIFT to constrain, ALT to copy @@ -1239,12 +1297,12 @@ from menu Tools -> Addon Manager Draft_PathArray - + PathArray - + Creates copies of a selected object along a selected path. @@ -1252,12 +1310,12 @@ from menu Tools -> Addon Manager Draft_Point - + Point - + Creates a point object @@ -1265,12 +1323,12 @@ from menu Tools -> Addon Manager Draft_PointArray - + PointArray - + Creates copies of a selected object on the position of points. @@ -1278,12 +1336,12 @@ from menu Tools -> Addon Manager Draft_Polygon - + Polygon - + Creates a regular polygon. CTRL to snap, SHIFT to constrain @@ -1291,12 +1349,12 @@ from menu Tools -> Addon Manager Draft_Rectangle - + Rectangle - + Creates a 2-point rectangle. CTRL to snap @@ -1304,12 +1362,12 @@ from menu Tools -> Addon Manager Draft_Rotate - + Rotate - + Rotates the selected objects. CTRL to snap, SHIFT to constrain, ALT creates a copy @@ -1317,12 +1375,12 @@ from menu Tools -> Addon Manager Draft_Scale - + Scale - + Scales the selected objects from a base point. CTRL to snap, SHIFT to constrain, ALT to copy @@ -1330,12 +1388,12 @@ from menu Tools -> Addon Manager Draft_SelectGroup - + Select group - + Selects all objects with the same parents as this group @@ -1356,12 +1414,12 @@ from menu Tools -> Addon Manager Draft_SetWorkingPlaneProxy - + Creates a proxy object from the current working plane - + Create Working Plane Proxy @@ -1369,12 +1427,12 @@ from menu Tools -> Addon Manager Draft_Shape2DView - + Shape 2D view - + Creates Shape 2D views of selected objects @@ -1382,12 +1440,12 @@ from menu Tools -> Addon Manager Draft_ShapeString - + Shape from text... - + Creates text string in shapes. @@ -1395,12 +1453,12 @@ from menu Tools -> Addon Manager Draft_ShowSnapBar - + Show Snap Bar - + Shows Draft snap toolbar @@ -1408,12 +1466,12 @@ from menu Tools -> Addon Manager Draft_Slope - + Set Slope - + Sets the slope of a selected Line or Wire @@ -1421,12 +1479,12 @@ from menu Tools -> Addon Manager Draft_Snap_Angle - + Angles - + Snaps to 45 and 90 degrees points on arcs and circles @@ -1434,12 +1492,12 @@ from menu Tools -> Addon Manager Draft_Snap_Center - + Center - + Snaps to center of circles and arcs @@ -1447,12 +1505,12 @@ from menu Tools -> Addon Manager Draft_Snap_Dimensions - + Dimensions - + Shows temporary dimensions when snapping to Arch objects @@ -1460,12 +1518,12 @@ from menu Tools -> Addon Manager Draft_Snap_Endpoint - + Endpoint - + Snaps to endpoints of edges @@ -1473,12 +1531,12 @@ from menu Tools -> Addon Manager Draft_Snap_Extension - + Extension - + Snaps to extension of edges @@ -1486,12 +1544,12 @@ from menu Tools -> Addon Manager Draft_Snap_Grid - + Grid - + Snaps to grid points @@ -1499,12 +1557,12 @@ from menu Tools -> Addon Manager Draft_Snap_Intersection - + Intersection - + Snaps to edges intersections @@ -1512,17 +1570,17 @@ from menu Tools -> Addon Manager Draft_Snap_Lock - + Toggle On/Off - + Activates/deactivates all snap tools at once - + Lock @@ -1530,12 +1588,12 @@ from menu Tools -> Addon Manager Draft_Snap_Midpoint - + Midpoint - + Snaps to midpoints of edges @@ -1543,12 +1601,12 @@ from menu Tools -> Addon Manager Draft_Snap_Near - + Nearest - + Snaps to nearest point on edges @@ -1556,12 +1614,12 @@ from menu Tools -> Addon Manager Draft_Snap_Ortho - + Ortho - + Snaps to orthogonal and 45 degrees directions @@ -1569,12 +1627,12 @@ from menu Tools -> Addon Manager Draft_Snap_Parallel - + Parallel - + Snaps to parallel directions of edges @@ -1582,12 +1640,12 @@ from menu Tools -> Addon Manager Draft_Snap_Perpendicular - + Perpendicular - + Snaps to perpendicular points on edges @@ -1595,12 +1653,12 @@ from menu Tools -> Addon Manager Draft_Snap_Special - + Special - + Snaps to special locations of objects @@ -1608,12 +1666,12 @@ from menu Tools -> Addon Manager Draft_Snap_WorkingPlane - + Working Plane - + Restricts the snapped point to the current working plane @@ -1621,12 +1679,12 @@ from menu Tools -> Addon Manager Draft_Split - + Split - + Splits a wire into two wires @@ -1634,12 +1692,12 @@ from menu Tools -> Addon Manager Draft_Stretch - + Stretch - + Stretches the selected objects @@ -1647,12 +1705,12 @@ from menu Tools -> Addon Manager Draft_Text - + Text - + Creates an annotation. CTRL to snap @@ -1660,12 +1718,12 @@ from menu Tools -> Addon Manager Draft_ToggleConstructionMode - + Toggles the Construction Mode for next objects. - + Toggle Construction Mode @@ -1673,12 +1731,12 @@ from menu Tools -> Addon Manager Draft_ToggleContinueMode - + Toggle Continue Mode - + Toggles the Continue Mode for next commands. @@ -1686,12 +1744,12 @@ from menu Tools -> Addon Manager Draft_ToggleDisplayMode - + Toggle display mode - + Swaps display mode of selected objects between wireframe and flatlines @@ -1699,22 +1757,22 @@ from menu Tools -> Addon Manager Draft_ToggleGrid - + Toggle Grid - + Toggles the Draft grid on/off - + Grid - + Toggles the Draft grid On/Off @@ -1722,12 +1780,12 @@ from menu Tools -> Addon Manager Draft_Trimex - + Trimex - + Trims or extends the selected object, or extrudes single faces. CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts @@ -1735,12 +1793,12 @@ from menu Tools -> Addon Manager Draft_UndoLine - + Undo last segment - + Undoes the last drawn segment of the line being drawn @@ -1748,12 +1806,12 @@ from menu Tools -> Addon Manager Draft_Upgrade - + Upgrade - + Joins the selected objects into one, or converts closed wires to filled faces, or unites faces @@ -1761,12 +1819,12 @@ from menu Tools -> Addon Manager Draft_VisGroup - + VisGroup - + Adds a VisGroup @@ -1774,12 +1832,12 @@ from menu Tools -> Addon Manager Draft_Wire - + DWire - + Creates a multiple-point DraftWire (DWire). CTRL to snap, SHIFT to constrain @@ -1787,12 +1845,12 @@ from menu Tools -> Addon Manager Draft_WireToBSpline - + Wire to B-spline - + Converts between Wire and B-spline @@ -1805,17 +1863,17 @@ from menu Tools -> Addon Manager - + This is the default color for objects being drawn while in construction mode. - + This is the default group name for construction geometry - + Construction @@ -1859,11 +1917,6 @@ from menu Tools -> Addon Manager YZ (Side) - - - The number of decimals in internal coordinates operations (for ex. 3 = 0.001) - - Default height for texts and dimensions @@ -1908,7 +1961,7 @@ such as "Arial:Bold" - + When exporting splines to DXF, they are transformed in polylines. This value is the maximum length of each of the polyline segments. If 0, then the whole spline is treated as a straight segment. @@ -1928,28 +1981,22 @@ such as "Arial:Bold" - + Construction group name - + Tolerance - - This is the value used by functions that use a tolerance. -Values with differences below this value will be treated as same. - - - - + Check this if you want the non-named blocks (beginning with a *) to be imported too - + Join geometry @@ -2069,17 +2116,17 @@ Values with differences below this value will be treated as same. - + Group layers into blocks - + If this is checked, all objects containing faces will be exported as 3d polyfaces - + Export 3D objects as polyface meshes @@ -2109,32 +2156,32 @@ Values with differences below this value will be treated as same. - + If this is checked, imported texts will get the standard Draft text size, instead of the size they have in the DXF document - + Use standard font size for texts - + If this is checked, hatches will be converted into simple wires - + Import hatch boundaries as wires - + If this is checked, when polylines have a width defined, they will be rendered as closed wires with the correct width - + Render polylines with width @@ -2164,12 +2211,12 @@ Values with differences below this value will be treated as same. - + When this is checked, the Draft tools will create Part primitives instead of Draft objects, when available. - + Use Part Primitives when available @@ -2189,47 +2236,47 @@ Values with differences below this value will be treated as same. - + Construction geometry - + Construction geometry color - + Import - + texts and dimensions - + points - + layouts - + *blocks - + If this is checked, the exported objects will be projected to reflect the current view direction - + Project exported objects along current view direction @@ -2334,52 +2381,52 @@ Values with differences below this value will be treated as same. - + Fill objects with faces whenever possible - + Create - + simple Part shapes - + If this is checked, parametric Draft objects will be created whenever possible - + Draft objects - + If this is checked, sketches will be created whenever possible - + Sketches - + If this is checked, colors will be retrieved from the DXF objects whenever possible. Otherwise default colors will be applied. - + Get original colors from the DXF file - + Treat ellipses and splines as polylines @@ -2394,27 +2441,27 @@ Values with differences below this value will be treated as same. - + <html><head/><body><p>By checking this, you will allow FreeCAD to download and update the</p><p>components needed for DXF import and export. You can also do that</p><p>manually, by visiting https://github.com/yorikvanhavre/Draft-dxf-importer</p></body></html> - + Allow FreeCAD to automatically download and update the DXF libraries - + If this is checked, only standard Part objects will be created (fastest) - + If this is checked, DXF layers will be imported as Draft VisGroups - + Use VisGroups @@ -2599,17 +2646,17 @@ Values with differences below this value will be treated as same. - + If this is checked, Drawing Views will be exported as blocks. This might fail for post-R12 templates. - + Export Drawing Views as blocks - + Note: Not all the options below are used by the new importer yet @@ -2619,22 +2666,22 @@ Values with differences below this value will be treated as same. - + Automatic update (legacy importer only) - + Prefix labels of Clones with: - + Scale factor to apply to imported files - + Scale factor to apply to DXF files on import. The factor is the conversion between the unit of your DXF file and millimeters. Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: 25.4, in feet: 304.8 @@ -2661,7 +2708,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: - + If this is checked, objects will appear as filled by default. Otherwise, they will appear as wireframe @@ -2721,22 +2768,22 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: - + If this is unchecked, texts/mtexts won't be imported - + If this is checked, paper space objects will be imported too - + If checked, FreeCAD will try to join coincident objects into wires. Beware, this can take a while... - + If this is checked, objects from the same layers will be joined into Draft Blocks, turning the display faster, but making them less easily editable @@ -2751,7 +2798,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: - + When drawing lines, set focus on Length instead of X coordinate @@ -2821,20 +2868,36 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: - + Ellipse export is poorly supported. Use this to export them as polylines instead. - + Max Spline Segment: + + + The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users. + + + + + This is the value used by functions that use a tolerance. +Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both. + + + + + Use legacy python exporter + + Workbench - + Draft Snap @@ -2867,322 +2930,322 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: draft - + not shape found - + All Shapes must be co-planar - + The given object is not planar and cannot be converted into a sketch. - + Unable to guess the normal direction of this object - + Draft Command Bar - + Toggle construction mode - + Current line color - + Current face color - + Current line width - + Current font size - + Apply to selected objects - + Autogroup off - + active command: - + None - + Active Draft command - + X coordinate of next point - + X - + Y - + Z - + Y coordinate of next point - + Z coordinate of next point - + Enter point - + Enter a new point with the given coordinates - + Length - + Angle - + Length of current segment - + Angle of current segment - + Radius - + Radius of Circle - + If checked, command will not finish until you press the command button again - + If checked, an OCC-style offset will be performed instead of the classic offset - + &OCC-style offset - + Add points to the current object - + Remove points from the current object - + Make Bezier node sharp - + Make Bezier node tangent - + Make Bezier node symmetric - + Sides - + Number of sides - + Offset - + XY (top) - + Select XY plane - + XZ (front) - + Select XZ plane - + YZ (side) - + Select YZ plane - + View - + Select plane perpendicular to the current view - + Auto - + Do not project points to a drawing plane - + Text string to draw - + String - + Height of text - + Height - + Intercharacter spacing - + Tracking - + Full path to font file: - + Open a FileChooser for font file - + Grid spacing - + The spacing between the grid lines - + Main line every - + The number of lines between main lines - + Center plane on view - + Select Plane @@ -3192,132 +3255,132 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: - + DWire - + Circle - + Center X - + Arc - + Point - + Label - + Distance - + Trim - + Pick Object - + Edit - + Global X - + Global Y - + Global Z - + Local X - + Local Y - + Local Z - + Invalid Size value. Using 200.0. - + Invalid Tracking value. Using 0. - + Please enter a text string. - + Select a Font file - + Please enter a font file. - + Autogroup: - + Faces - + Remove - + Add - + Facebinder elements @@ -3327,190 +3390,190 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: - + Pick next point: - + Convert to Wire - + BSpline - + BezCurve - + Create BezCurve - + Rectangle - + Create Plane - + Create Rectangle - + Create Circle - + Create Arc - + Start Angle - + Aperture - + Polygon - + Create Polygon - + Ellipse - + Create Ellipse - + Text - + Create Text - + Dimension - + Create Dimension - + ShapeString - + Create ShapeString - + Copy - + Move - + Change Style - + Rotate - + Cannot offset this object type - + Stretch - + Upgrade - + Downgrade - + Selection is not a Knot - + Convert to Sketch - + Convert to Draft - + Convert - + Array - + Create Point - + Mirror @@ -3520,19 +3583,7 @@ Ex: for files in millimeters: 1, in centimeters: 10, in meters: 1000, in inches: - - The DXF import/export libraries needed by FreeCAD to handle -the DXF format were not found on this system. -Please either enable FreeCAD to download these libraries: - 1 - Load Draft workbench - 2 - Menu Edit > Preferences > Import-Export > DXF > Enable downloads -Or install the libraries manually by installing the dxf-Library addon -from menu Tools -> Addon Manager. -To enabled FreeCAD to download these libraries, answer Yes. - - - - + The DXF import/export libraries needed by FreeCAD to handle the DXF format were not found on this system. Please either enable FreeCAD to download these libraries: @@ -3544,178 +3595,178 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Draft.makeBSpline: not enough points - + Draft.makeBSpline: Equal endpoints forced Closed - + Draft.makeBSpline: Invalid pointslist - + No object given - + The two points are coincident - + Found groups: closing each open object inside - + Found mesh(es): turning into Part shapes - + Found 1 solidifiable object: solidifying it - + Found 2 objects: fusing them - + Found several objects: creating a shell - + Found several coplanar objects or faces: creating one face - + Found 1 non-parametric objects: draftifying it - + Found 1 closed sketch object: creating a face from it - + Found 1 linear object: converting to line - + Found closed wires: creating faces - + Found 1 open wire: closing it - + Found several open wires: joining them - + Found several edges: wiring them - + Found several non-treatable objects: creating compound - + Unable to upgrade these objects. - + Found 1 block: exploding it - + Found 1 multi-solids compound: exploding it - + Found 1 parametric object: breaking its dependencies - + Found 2 objects: subtracting them - + Found several faces: splitting them - + Found several objects: subtracting them from the first one - + Found 1 face: extracting its wires - + Found only wires: extracting their edges - + No more downgrade possible - + _BSpline.createGeometry: Closed with same first/last Point. Geometry not updated. - + No point found - + ShapeString: string has no wires - + Relative - + Continue - + Close @@ -3760,7 +3811,7 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Select edge @@ -3775,7 +3826,7 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Wipe @@ -3790,82 +3841,82 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Check this to lock the current angle - + Coordinates relative to last point or absolute - + Filled - + Check this if the object should appear as filled, otherwise it will appear as wireframe - + Finish - + Finishes the current drawing or editing operation - + &Undo (CTRL+Z) - + Undo the last segment - + Finishes and closes the current line - + Wipes the existing segments of this line and starts again from the last point - + Set WP - + Reorients the working plane on the last segment - + Selects an existing edge to be measured by this dimension - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands - + options - + Default @@ -3885,355 +3936,416 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Create Wire - + Removing last point - + Next point: - + Restarting from - + Unable to create a Wire from selected objects - + Spline has been closed - + Last point has been removed - + Pick next point, or Finish (shift-F) or close (o): - + Create B-spline - + Bezier curve has been closed - + Pick first point: - + Pick opposite point: - + Pick center point: - + Pick radius: - + Pick start angle: - + Pick aperture: - + Aperture angle: - + Pick location point: - + Edges don't intersect! - + Pick ShapeString location point: - + Select an object to move - + Pick start point: - + Pick end point: - + Select an object to rotate - + Pick rotation center: - + Pick base angle: - + Pick rotation angle: - + Select an object to offset - + Offset only works on one object at a time - + Sorry, offset of Bezier curves is currently still not supported - + Pick distance: - + Select an object to stretch - + Pick first point of selection rectangle: - + Pick opposite point of selection rectangle: - + Pick start point of displacement: - + Pick end point of displacement: - + Turning one Rectangle into a Wire - + Select an object to join - + Join - + Select an object to split - + Select an object to upgrade - + Select object(s) to trim/extend - + Unable to trim these objects, only Draft wires and arcs are supported - + Unable to trim these objects, too many wires - + These objects don't intersect - + Too many intersection points - + Select an object to scale - + Pick base point: - + Pick reference distance from base point: - + Pick new distance from base point: - + Select an object to project - + This object type is not editable - + Please select only one object - + Select a Draft object to edit - + Active object must have more than two points/nodes - + Endpoint of BezCurve can't be smoothed - + Select an object to convert - + Select an object to array - + Please select base and path objects - + Please select base and pointlist objects - + Select an object to clone - + Select face(s) on existing object(s) - + Select an object to mirror - + Pick start point of mirror line: - + Pick end point of mirror line: - + This tool only works with Wires and Lines - + Pick target point: - + Pick endpoint of leader line: - + Pick text position: - + ODA (formerly Teigha) File Converter not found, DWG support is disabled + + + %s shares a base with %d other objects. Please check if you want to modify this. + + + + + Subelement mode + + + + + Toggle radius and angles arc editing + + + + + Modify subelements + + + + + If checked, subelements will be modified instead of entire objects + + + + + CubicBezCurve + + + + + Click and drag to define next knot: + + + + + + Click and drag to define next knot: ESC to Finish or close (o): + + + + + Some subelements could not be moved. + + + + + Scale + + + + + Some subelements could not be scaled. + + + + + Wall base sketch is too complex to edit: it's suggested to edit directly the sketch + + diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing.ts index 882843022c..54aab751d5 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing.ts @@ -740,19 +740,19 @@ Do you want to continue? - + Make axonometric... - + Edit axonometric settings... - + Make orthographic diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem.ts b/src/Mod/Fem/Gui/Resources/translations/Fem.ts index 05fc444310..13e2349a56 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem.ts @@ -69,11 +69,6 @@ Analysis container - - - Creates a analysis container with standard solver CalculiX - - Creates an analysis container with standard solver CalculiX @@ -147,6 +142,11 @@ Constraint initial flow velocity + + + Creates a FEM constraint initial flow velocity + + FEM_ConstraintSelfWeight @@ -199,16 +199,6 @@ Creates a FEM shell plate thickness - - - Shell plate thickness - - - - - Creates a FEM shell plate thickness - - FEM_ElementRotation1D @@ -274,6 +264,19 @@ Creates a FEM equation for fluxsolver + + + Creates a FEM equation for fluxsolver + + + + + FEM_EquationHeat + + + Fluxsolver heat + + FEM_FEMMesh2Mesh @@ -288,13 +291,26 @@ - - FEM mesh to mesh + + Convert the surface of a FEM mesh to a mesh + + + + + FEM_MaterialFluid + + + Material for fluid - - Convert the surface of a FEM mesh to a mesh + + FEM material for Fluid + + + + + Creates a FEM material for Fluid @@ -311,16 +327,16 @@ - - Nonlinear mechanical material + + Creates a nonlinear mechanical material FEM_MaterialSolid - - Creates a FEM material for solid + + Material for solid @@ -354,16 +370,6 @@ Clear the Mesh of a FEM mesh object - - - Clear FEM mesh - - - - - Clear the Mesh of a FEM mesh object - - FEM_MeshDisplayInfo @@ -372,6 +378,34 @@ Display FEM mesh info + + + Display FEM mesh info + + + + + FEM_MeshGmshFromShape + + + FEM mesh from shape by Gmsh + + + + + Create a FEM mesh from a shape by Gmsh mesher + + + + + FEM mesh from shape by GMSH + + + + + Create a FEM mesh from a shape by GMSH mesher + + FEM_MeshGroup @@ -385,11 +419,6 @@ Creates a FEM mesh group - - - FEM mesh group - - Creates a FEM mesh group @@ -434,16 +463,6 @@ Purges all results from active analysis - - - Purge results - - - - - Purges all results from active analysis - - FEM_SolverCalculiX @@ -457,6 +476,16 @@ Creates a FEM solver CalculiX (experimental) + + + Solver CalculiX (experimental) + + + + + Creates a FEM solver CalculiX (experimental) + + FEM_SolverControl @@ -519,16 +548,6 @@ Default Fem Command ToolTip - - - Default Fem Command MenuText - - - - - Default Fem Command ToolTip - - GeometryElementsSelection @@ -596,17 +615,32 @@ Remove - - - FEM_MaterialFluid - - FEM material for Fluid + + Add - - Creates a FEM material for Fluid + + Remove + + + + + FEM_SolverCalculix + + + Creates a standard FEM solver CalculiX with ccx tools + + + + + Solver CalculiX + + + + + Creates a FEM solver CalculiX @@ -623,19 +657,6 @@ - - FEM_MeshGmshFromShape - - - FEM mesh from shape by GMSH - - - - - Create a FEM mesh from a shape by GMSH mesher - - - FEM_MeshPrintInfo @@ -644,19 +665,6 @@ - - FEM_SolverCalculix - - - Solver CalculiX - - - - - Creates a FEM solver CalculiX - - - FEM_BeamSection diff --git a/src/Mod/Image/Gui/Resources/translations/Image.ts b/src/Mod/Image/Gui/Resources/translations/Image.ts index 3777bc8d03..f3f438cf72 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image.ts @@ -10,7 +10,7 @@ - Distance + Distance [mm] diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh.ts index 8c5967550b..ad980536ac 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh.ts @@ -1158,6 +1158,12 @@ Please run the command to repair folds first Export AMF files using compression + + + This parameter indicates whether ZIP compression +is used when writing a file in AMF format + + MeshGui::DlgSettingsMeshView diff --git a/src/Mod/Path/Gui/Resources/translations/Path.ts b/src/Mod/Path/Gui/Resources/translations/Path.ts index 221bcde564..0e5cda2f61 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path.ts @@ -23,6 +23,41 @@ Additional offset to the selected bounding box + + + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. + + + + + The completion mode for the operation: single or multi-pass + + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + + + + + Clearing pattern to use + + + + + The model will be rotated around this axis. + + + + + Start index(angle) for rotational scan + + + + + Stop index(angle) for rotational scan + + Step over percentage of the drop cutter path @@ -43,6 +78,21 @@ Enable optimization which removes unnecessary points from G-Code output + + + Ignore areas that proceed below specified depth. + + + + + Depth used to identify waste areas to ignore. + + + + + Cut through waste to depth at model edge, releasing the model. + + The path to be copied @@ -83,16 +133,6 @@ The Z height of the hop - - - The object to be reached by this hop - - - - - The Z height of the hop - - Calculate roll-on to path @@ -109,8 +149,8 @@ - - Fixture Offset Number + + Use Machine Cutter Radius Compensation /Tool Path Offset G41/G42 @@ -119,8 +159,8 @@ - - Ramping Method + + Fixture Offset Number @@ -129,7 +169,7 @@ - + Ramping Method @@ -143,6 +183,16 @@ Custom feedrate + + + Should the dressup ignore motion commands above DressupStartDepth + + + + + The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. + + Incremental Drill depth before retracting to clear chips @@ -154,13 +204,8 @@ - - Locations of insterted holes - - - - - Enable/disable status of the holes + + Height to clear top of material @@ -169,18 +214,13 @@ - - Height to clear top of material + + Calculate the tip length and subtract from final depth - - The depth where the ramp dressup is enabled. Above this ramps are not generated, but motion commands are passed through as is. - - - - - Orientation plane of CNC path + + Incremental Drill depth before retracting to clear chips @@ -189,8 +229,13 @@ - - The time to dwell between peck cycles + + Orientation plane of CNC path + + + + + Enable dwell @@ -209,28 +254,23 @@ - - The base object this collision refers to + + Orientation plane of CNC path - - The base geometry of this toolpath + + Shape to use for calculating Boundary - - Side of edge that tool should cut + + Profile holes as well as the outline - - The direction that the toolpath should go around the part ClockWise CW or CounterClockWise CCW - - - - - make True, if using Cutter Radius Compensation + + Make True, if using Cutter Radius Compensation @@ -253,11 +293,6 @@ Extra offset to apply to the operation. Direction is operation dependent. - - - clearing pattern to use - - Start pocketing at center or boundary @@ -274,13 +309,13 @@ - - Make True, if using Cutter Radius Compensation + + Maximum distance before a miter join is truncated - - Extra value to stay away from final profile- good for roughing toolpath + + Extra offset to apply to the operation. Direction is operation dependent. @@ -293,6 +328,11 @@ Pattern method + + + Angle of the zigzag pattern + + The active tool @@ -334,13 +374,13 @@ - - Pattern method + + Direction of spindle rotation - - The active tool + + Feed rate for vertical moves in Z @@ -349,13 +389,8 @@ - - Rapid rate for vertical moves in Z - - - - - Rapid rate for horizontal moves + + The base geometry of this toolpath @@ -551,6 +586,21 @@ Parent job %s doesn't have a base object + + + %s is not a Base Model object of the job %s + + + + + Base shape %s already in the list + + + + + Ignoring vertex + + Heights @@ -582,13 +632,13 @@ - - No parent job found for operation. + + Engraving Operations - - Parent job %s doesn't have a base object + + 3D Operations @@ -596,11 +646,6 @@ Project Setup - - - Partial Commands - - Tool Commands @@ -612,8 +657,8 @@ - - Edit + + Path Modification @@ -632,18 +677,8 @@ - - Pick Start Point - - - - - Engraving Operations - - - - - 3D Operations + + Supplemental Commands @@ -651,16 +686,6 @@ Project Setup - - - Tool Commands - - - - - New Operations - - Path Modification @@ -671,6 +696,26 @@ Helpful Tools + + + &Path + + + + + Path Dressup + + + + + Supplemental Commands + + + + + Edit + + this object already in the list @@ -717,13 +762,16 @@ - + job %s has no Base. + + + PathAdaptive - - no job for op %s found. + + Adaptive @@ -798,6 +846,11 @@ Creates a Path Drilling object from a features of a base object + + + Drilling + + PathEngrave @@ -812,21 +865,26 @@ - - The Job Base Object has no engraveable element. Engraving operation will produce no output. + + Additional base objects to be engraved - PathCustom + PathDeburr - - The gcode to be inserted + + Deburr - - The tool controller that will be used to calculate the path + + The desired width of the chamfer + + + + + The additional depth of the tool path @@ -837,26 +895,6 @@ Face - - - Create a Facing Operation from a model or face - - - - - Create Face - - - - - Face - - - - - Create a Facing Operation from a model or face - - Generating toolpath with libarea offsets. @@ -886,16 +924,6 @@ isHorizontal(%s) not supported - - - isVertical(%s) not supported - - - - - isHorizontal(%s) not supported - - %s not support for flipping @@ -914,11 +942,6 @@ Cannot find property %s of %s - - - Cannot find property %s of %s - - PathHelix @@ -932,6 +955,11 @@ Creates a Path Helix object from a features of a base object + + + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) + + The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) @@ -942,26 +970,6 @@ Start cutting from the inside or outside - - - Radius increment (must be smaller than tool diameter) - - - - - Creates a helix cut from selected circles - - - - - Create a helix cut - - - - - Helix - - Creates a Path Helix object from a features of a base object @@ -969,7 +977,7 @@ - The direction of the circular cuts, clockwise (CW), or counter clockwise (CCW) + The direction of the circular cuts, ClockWise (CW), or CounterClockWise (CCW) @@ -1010,6 +1018,11 @@ Unsupported stock type %s (%d) + + + Stock not from Base bound box! + + Solid object to be used as stock. @@ -1020,14 +1033,54 @@ Compound path of all operations in the order they are processed. + + + Collection of tool controllers available for this job. + + + + + Unsupported stock type %s (%d) + + + + + The NC output file for this project + + + + + Select the Post Processor + + + + + SetupSheet holding the settings for this job + + + + + An optional description for this job + + Unsupported PathJob template version %s - - Stock not from Base bound box! + + Solids + + + + + 2D + + + + + Jobs @@ -1051,85 +1104,15 @@ - - Arguments for the Post Processor (specific to the script) - - - - - An optional description for this job - - - - - For computing Paths; smaller increases accuracy, but slows down computation - - - - - Solid object to be used as stock. - - - - - The base object for all operations - - - - - Compound path of all operations in the order they are processed. - - - - - Collection of tool controllers available for this job. - - - - - SetupSheet holding the settings for this job - - - - - Unsupported PathJob template version %s - - - - - Solids - - - - + 2D - - Jobs - - - - + Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f - - - Box: %.2f x %.2f x %.2f - - - - - Cylinder: %.2f x %.2f - - - - - Unsupported stock type - - Select Output File @@ -1148,6 +1131,21 @@ Holds the calculated value for the StartDepth + + + Holds the calculated value for the FinalDepth + + + + + Holds the max Z value of Stock + + + + + Make False, to prevent operation from generating code + + An optional comment for this Operation @@ -1163,66 +1161,11 @@ Base locations for this operation - - - The base geometry for this operation - - Holds the calculated value for the StartDepth - - - Base Geometry - - - - - Base Location - - - - - Holds the max Z value of Stock - - - - - Depths - - - - - Operation - - - - - Holds the calculated value for the FinalDepth - - - - - Holds the diameter of the tool - - - - - Make False, to prevent operation from generating code - - - - - An optional comment for this Operation - - - - - User Assigned Label - - Starting Depth of Tool- first cut depth in Z @@ -1234,8 +1177,53 @@ - - The height needed to clear clamps and obstructions + + Holds the max Z value of Stock + + + + + Holds the min Z value of Stock + + + + + Make False, to prevent operation from generating code + + + + + Starting Depth internal use only for derived values + + + + + Rapid Safety Height between locations. + + + + + The start point of this path + + + + + Make True, if specifying a Start Point + + + + + The tool controller that will be used to calculate the path + + + + + Base Geometry + + + + + Base Location @@ -1245,28 +1233,13 @@ If it is necessary to set the FinalDepth manually please select a different oper - + Depths - - - Operation - - PathPocket - - - Pass Extension - - - - - The distance the facing operation will extend beyond the boundary shape. - - 3D Pocket @@ -1277,16 +1250,66 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path 3D Pocket object from a face or faces + + + Vertical faces do not form a loop - ignoring + + Pocket does not support shape %s.%s - + + Adaptive clearing and profiling + + + + + Pass Extension + + + + + The distance the facing operation will extend beyond the boundary shape. + + + + + Normal + + + + + X + + + + + Y + + + + + Pocket Shape + + + + + Creates a Path Pocket object from a face or faces + + + + Vertical faces do not form a loop - ignoring + + + Pocket does not support shape %s.%s + + Adaptive clearing and profiling @@ -1302,16 +1325,6 @@ If it is necessary to set the FinalDepth manually please select a different oper The distance the facing operation will extend beyond the boundary shape. - - - Pocket Shape - - - - - Creates a Path Pocket object from a face or faces - - Generating toolpath with libarea offsets. @@ -1324,6 +1337,44 @@ If it is necessary to set the FinalDepth manually please select a different oper + + PathPocketShape + + + Reverse direction of pocket operation. + + + + + Uses the outline of the base geometry. + + + + + Default length of extensions. + + + + + List of features to extend. + + + + + When enabled connected extension edges are combined to wires. + + + + + Match B rotations to model (error in FreeCAD rendering). + + + + + Reverse direction of pocket operation. + + + PathProfile @@ -1341,6 +1392,21 @@ If it is necessary to set the FinalDepth manually please select a different oper Face Profile + + + Profile based on face or faces + + + + + Edge Profile + + + + + Profile based on edges + + Face Profile @@ -1374,6 +1440,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Contour Path for the Base Object + + + Contour + + + + + Creates a Contour Path for the Base Object + + PathProject @@ -1392,6 +1468,21 @@ If it is necessary to set the FinalDepth manually please select a different oper Faces are not supported + + + Vertexes are not supported + + + + + Edges are not supported + + + + + Faces are not supported + + Please select only faces from one solid @@ -1493,8 +1584,31 @@ If it is necessary to set the FinalDepth manually please select a different oper + + PathSetupSheet + + + Default speed for horizontal rapid moves. + + + + + Default speed for vertical rapid moves. + + + PathStock + + + Length of this stock box + + + + + Width of this stock box + + Height of this stock box @@ -1505,6 +1619,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Radius of this stock cylinder + + + Height of this stock cylinder + + + + + Internal representation of stock type + + Corrupted or incomplete placement information in template - ignoring @@ -1535,66 +1659,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Unsupported PathStock template version {} - - - Length of this stock box - - - - - Width of this stock box - - - - - Height of this stock box - - - - - Radius of this stock cylinder - - - - - Height of this stock cylinder - - - - - Internal representation of stock type - - - - - Corrupted or incomplete placement information in template - ignoring - - - - - Corrupted or incomplete specification for creating stock from base - ignoring extent - - - - - Corrupted or incomplete size for creating a stock box - ignoring size - - - - - Corrupted or incomplete size for creating a stock cylinder - ignoring size - - - - - Unsupported stock type named {} - - - - - Unsupported PathStock template version {} - - Stock @@ -1618,11 +1682,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Error updating TC: %s - - - Unsupported PathToolController template version %s - - Error updating TC: %s @@ -1636,11 +1695,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Unsupported Path tooltable template version %s - - - Unsupported Path tooltable template version %s - - PathUtils @@ -1649,11 +1703,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Issue determine drillability: {} - - - Issue determine drillability: {} - - Path_Array @@ -1667,22 +1716,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates an array from a selected path - - - Please select exactly one path object - - - - - - Array - - - - - Creates an array from a selected path - - Please select exactly one path object @@ -1706,21 +1739,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Comment in your CNC program - - - Comment - - - - - Add a Comment to your CNC program - - - - - Create a Comment in your CNC program - - Path_Copy @@ -1739,21 +1757,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Copy - - - Copy - - - - - Creates a linked copy of another path - - - - - Create Copy - - Path_Custom @@ -1767,50 +1770,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a path object based on custom G-code - - - Custom - - - - - Creates a path object based on custom G-code - - Path_Dressup Please select one path object - - - - - - The selected object is not a path - - - - - - Please select a Path object - - - - - Create Dress-up - - - - - Please select one path object - - - - - - The selected object is not a path @@ -1925,6 +1890,36 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dogbone Dress-up + + + Edit Dogbone Dress-up + + + + + Dogbone Dress-up + + + + + Creates a Dogbone Dress-up object from a selected path + + + + + Please select one path object + + + + + The selected object is not a path + + + + + Create Dogbone Dress-up + + Path_DressupDragKnife @@ -1958,6 +1953,36 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up + + + DragKnife Dress-up + + + + + Modifies a path to add dragknife corner actions + + + + + Please select one path object + + + + + The selected object is not a path + + + + + Please select a Path object + + + + + Create Dress-up + + Path_DressupLeadInOut @@ -1966,6 +1991,97 @@ If it is necessary to set the FinalDepth manually please select a different oper The Style of LeadIn the Path + + + The Style of LeadOut the Path + + + + + The Mode of Point Radiusoffset or Center + + + + + The Style of LeadIn the Path + + + + + The Style of LeadOut the Path + + + + + The Mode of Point Radiusoffset or Center + + + + + LeadInOut Dressup + + + + + Creates a Cutter Radius Compensation G41/G42 Entry Dressup object from a selected path + + + + + Path_DressupRampEntry + + + The base path to modify + + + + + Angle of ramp. + + + + + Path_DressupTag + + + Tag Dress-up + + + + + Creates a Tag Dress-up object from a selected path + + + + + The base path to modify + + + + + Width of tags. + + + + + Height of tags. + + + + + Angle of tag plunge and ascent. + + + + + Radius of the fillet for the tag. + + + + + Base Path is empty. + + Path_Fixture @@ -1984,16 +2100,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Fixture Offset - - - Fixture - - - - - Creates a Fixture Offset object - - Path_Hop @@ -2030,8 +2136,8 @@ If it is necessary to set the FinalDepth manually please select a different oper - - Create Hop + + Please select one path object @@ -2052,17 +2158,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Inspects the G-code contents of a path - - - Please select exactly one path object - - - - - - <b>Note</b>: Pressing OK will commit any change you make above to the object, but if the object is parametric, these changes will be overridden on recompute. - - Please select exactly one path object @@ -2117,19 +2212,6 @@ If it is necessary to set the FinalDepth manually please select a different oper - - Path_DressupTag - - - Please select a Profile object - - - - - Base Path is empty. - - - Path_OperationCopy @@ -2137,11 +2219,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Copy the operation in the job - - - Copy the operation in the job - - Path_Plane @@ -2155,16 +2232,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create a Selection Plane object - - - Selection Plane - - - - - Create a Selection Plane object - - Path_Post @@ -2183,21 +2250,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Post Process the Selected path(s) - - - Post Process - - - - - Post Process the selected Job - - - - - Post Process the Selected path(s) - - Path_PreferencesPathDressup @@ -2206,11 +2258,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Dressups - - - Dressups - - Path_Sanity @@ -2224,51 +2271,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Check the Path Project for common errors - - - Please select a path Project to check - - - - - - Please select a path project to check - - - - - - The Job has no selected Base object. - - - - - - Check the Path project for common errors - - - - - Check the Path Project for common errors - - The Job has no selected Base object. - - - A Postprocessor has not been selected. - - - - - - No output file is named. You'll be prompted during postprocessing. - - - A Postprocessor has not been selected. @@ -2279,12 +2286,6 @@ If it is necessary to set the FinalDepth manually please select a different oper No output file is named. You'll be prompted during postprocessing. - - - A Tool Controller was not found. Default values are used which is dangerous. Please add a Tool Controller. - - - No active operations was found. Post processing will not result in any tooling. @@ -2330,6 +2331,19 @@ If it is necessary to set the FinalDepth manually please select a different oper + + Path_SetupSheet + + + Edit SetupSheet + + + + + Edit SetupSheet + + + Path_SimpleCopy @@ -2364,6 +2378,29 @@ If it is necessary to set the FinalDepth manually please select a different oper + + Path_Simulator + + + CAM Simulator + + + + + Simulate Path G-Code on stock + + + + + CAM Simulator + + + + + Simulate Path G-Code on stock + + + Path_Stop @@ -2387,6 +2424,43 @@ If it is necessary to set the FinalDepth manually please select a different oper + + Path_Surface + + + This operation requires OpenCamLib to be installed. + + + + + This operation requires OpenCamLib to be installed. + + + + + Hold on. This might take a minute. + + + + + + This operation requires OpenCamLib to be installed. + + + + + + Please select a single solid object from the project tree + + + + + + Cannot work with this object + + + + Path_ToolController @@ -2413,7 +2487,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolTable - + Tool Manager @@ -2473,6 +2547,51 @@ If it is necessary to set the FinalDepth manually please select a different oper LinuxCNC tooltable (*.tbl) + + + Open tooltable + + + + + Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) + + + + + Save tooltable + + + + + Tooltable JSON (*.json) + + + + + Tooltable XML (*.xml) + + + + + HeeksCAD tooltable (*.tooltable) + + + + + LinuxCNC tooltable (*.tbl) + + + + + Open tooltable + + + + + Save tooltable + + Tooltable editor @@ -2488,16 +2607,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Import... - - - Export... - - - - - Slot - - Tool @@ -2688,21 +2797,6 @@ If it is necessary to set the FinalDepth manually please select a different oper mm - - - Open tooltable - - - - - Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - - - Save tooltable - - Object not found @@ -2713,36 +2807,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property - - - Tooltable JSON (*.json) - - - - - Tooltable XML (*.xml) - - - - - HeeksCAD tooltable (*.tooltable) - - - - - LinuxCNC tooltable (*.tbl) - - - - - Open tooltable - - - - - Save tooltable - - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) @@ -2750,55 +2814,15 @@ If it is necessary to set the FinalDepth manually please select a different oper - Path_SetupSheet + PathCustom - - Edit SetupSheet - - - - - Path_Simulator - - - CAM Simulator + + The gcode to be inserted - - Simulate Path G-Code on stock - - - - - Path_Surface - - - This operation requires OpenCamLib to be installed. - - - - - Hold on. This might take a minute. - - - - - - This operation requires OpenCamLib to be installed. - - - - - - Please select a single solid object from the project tree - - - - - - Cannot work with this object - + + The tool controller that will be used to calculate the path diff --git a/src/Mod/Plot/resources/translations/Plot.ts b/src/Mod/Plot/resources/translations/Plot.ts index b44da19e18..48430a1640 100644 --- a/src/Mod/Plot/resources/translations/Plot.ts +++ b/src/Mod/Plot/resources/translations/Plot.ts @@ -107,107 +107,107 @@ plot_axes - + Configure axes - + Active axes - + Apply to all axes - + Dimensions - + X axis position - + Y axis position - + Scales - + X auto - + Y auto - + Index of the active axes - + Add new axes to the plot - + Remove selected axes - + Check it to apply transformations to all axes - + Left bound of axes - + Right bound of axes - + Bottom bound of axes - + Top bound of axes - + Outward offset of X axis - + Outward offset of Y axis - + X axis scale autoselection - + Y axis scale autoselection @@ -225,12 +225,12 @@ - + Plot document must be selected in order to save it - + Axes 0 can not be deleted @@ -248,62 +248,62 @@ plot_labels - + Set labels - + Active axes - + Title - + X label - + Y label - + Index of the active axes - + Title (associated to active axes) - + Title font size - + X axis title - + X axis title font size - + Y axis title - + Y axis title font size @@ -349,42 +349,42 @@ plot_save - + Save figure - + Inches - + Dots per Inch - + Output image file path - + Show a file selection dialog - + X image size - + Y image size - + Dots per point, with size will define output image resolution diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing.ts index ab4fc4a876..9be8ba5a9b 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing.ts @@ -4,17 +4,17 @@ CmdRaytracingExportProject - + File - + &Export project... - + Export a Raytracing project to a file @@ -22,27 +22,27 @@ CmdRaytracingNewLuxProject - + Raytracing - + New Luxrender project - + Insert new Luxrender project into the document - + No template - + No template available @@ -50,17 +50,17 @@ CmdRaytracingNewPartSegment - + Raytracing - + Insert part - + Insert a new part object into a Raytracing project @@ -68,27 +68,27 @@ CmdRaytracingNewPovrayProject - + Raytracing - + New POV-Ray project - + Insert new POV-Ray project into the document - + No template - + No template available @@ -96,17 +96,17 @@ CmdRaytracingRender - + Raytracing - + &Render - + Renders the current raytracing project with an external renderer @@ -114,17 +114,17 @@ CmdRaytracingResetCamera - + Raytracing - + &Reset Camera - + Sets the camera of the selected Raytracing project to match the current view @@ -170,16 +170,16 @@ - - + + No perspective camera - - The current view camera is not perspective and thus the result of the POV-Ray image later might look different to what you expect. + + The current view camera is not perspective and thus resulting in a POV-Ray image that may look different than what was expected. Do you want to continue? @@ -199,20 +199,20 @@ Do you want to continue? - - + + No template - - + + Cannot create a project because there is no template installed. - - The current view camera is not perspective and thus the result of the luxrender image later might look different to what you expect. + + The current view camera is not perspective and thus resulting in a luxrender image that may look different than what was expected. Do you want to continue? @@ -223,7 +223,7 @@ Do you want to continue? - + POV-Ray @@ -231,8 +231,8 @@ Do you want to continue? - - + + All Files @@ -240,107 +240,107 @@ Do you want to continue? - + Export page - - - - + + + + Wrong selection - + Select a Part object. - - + + No Raytracing project to insert - + Create a Raytracing project to insert a view. - + Select a Raytracing project to insert the view. - - - + + + Select one Raytracing project object. - + Luxrender - - + + POV-Ray not found - + Please set the path to the POV-Ray executable in the preferences. - + Please correct the path to the POV-Ray executable in the preferences. - - + + Luxrender not found - + Please set the path to the luxrender or luxconsole executable in the preferences. - + Please correct the path to the luxrender or luxconsole executable in the preferences. - + POV-Ray file missing - + The POV-Ray project file doesn't exist. - - + + Rendered image - + Lux project file missing - + The Lux project file doesn't exist. diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering.ts index 52de0a08d7..cdfabcaffc 100644 --- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering.ts +++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering.ts @@ -162,7 +162,7 @@ - + Input error @@ -195,7 +195,7 @@ - + Input error diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot.ts b/src/Mod/Robot/Gui/Resources/translations/Robot.ts index e2da5a1b69..ee9033d13f 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot.ts @@ -58,17 +58,17 @@ CmdRobotEdge2Trac - + Robot - + Edge to Trajectory... - + Generate a Trajectory from a set of edges @@ -252,17 +252,17 @@ CmdRobotSetDefaultValues - + Robot - + Set default values - + Set the default values for speed, acceleration and continuity for subsequent commands of waypoint creation @@ -302,17 +302,17 @@ CmdRobotTrajectoryCompound - + Robot - + Trajectory compound... - + Group and connect some trajectories to one @@ -320,17 +320,17 @@ CmdRobotTrajectoryDressUp - + Robot - + Dress-up trajectory... - + Create a dress-up object which overrides some aspects of a trajectory @@ -366,7 +366,7 @@ - + Wrong selection @@ -439,37 +439,37 @@ - + Set default speed - + speed: (e.g. 1 m/s or 3 cm/s) - + Set default continuity - + continuous ? - + Set default acceleration - + acceleration: (e.g. 1 m/s^2 or 3 cm/s^2) - + Select the Trajectory which you want to dress up. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts index 8235ae2c4a..c09c466fbf 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts @@ -4,17 +4,17 @@ CmdSketcherBSplineComb - + Sketcher - + Show/Hide B-spline curvature comb - + Switches between showing and hiding the curvature comb for all B-splines @@ -22,17 +22,17 @@ CmdSketcherBSplineDegree - + Sketcher - + Show/Hide B-spline degree - + Switches between showing and hiding the degree for all B-splines @@ -40,17 +40,17 @@ CmdSketcherBSplineKnotMultiplicity - + Sketcher - + Show/Hide B-spline knot multiplicity - + Switches between showing and hiding the knot multiplicity for all B-splines @@ -58,17 +58,17 @@ CmdSketcherBSplinePolygon - + Sketcher - + Show/Hide B-spline control polygon - + Switches between showing and hiding the control polygons for all B-splines @@ -76,17 +76,17 @@ CmdSketcherCarbonCopy - + Sketcher - + CarbonCopy - + Copies the geometry of another sketch @@ -94,17 +94,17 @@ CmdSketcherClone - + Sketcher - + Clone - + Creates a clone of the geometry taking as reference the last selected point @@ -112,17 +112,17 @@ CmdSketcherCloseShape - + Sketcher - + Close Shape - + Produce closed shape by Link end point of element with next elements' starting point @@ -130,33 +130,33 @@ CmdSketcherCompBSplineShowHideGeometryInformation - + Sketcher + - Show/hide B-spline information layer - + Show/Hide B-spline degree - + Show/Hide B-spline control polygon - + Show/Hide B-spline curvature comb - + Show/Hide B-spline knot multiplicity @@ -164,27 +164,27 @@ CmdSketcherCompConstrainRadDia - + Sketcher - + Constrain arc or circle - + Constrain an arc or a circle - + Constrain radius - + Constrain diameter @@ -192,17 +192,17 @@ CmdSketcherCompCopy - + Sketcher - + Copy - + Creates a clone of the geometry taking as reference the last selected point @@ -210,27 +210,27 @@ CmdSketcherCompCreateArc - + Sketcher - + Create arc - + Create an arc in the sketcher - + Center and end points - + End points and rim point @@ -238,17 +238,17 @@ CmdSketcherCompCreateBSpline - + Sketcher - + Create a B-spline - + Create a B-spline in the sketch @@ -256,27 +256,27 @@ CmdSketcherCompCreateCircle - + Sketcher - + Create circle - + Create a circle in the sketcher - + Center and rim point - + 3 rim points @@ -284,42 +284,42 @@ CmdSketcherCompCreateConic - + Sketcher - + Create a conic - + Create a conic in the sketch - + Ellipse by center, major radius, point - + Ellipse by Periapsis, apoapsis, minor radius - + Arc of ellipse by center, major radius, endpoints - + Arc of hyperbola by center, major radius, endpoints - + Arc of parabola by focus, vertex, endpoints @@ -327,52 +327,52 @@ CmdSketcherCompCreateRegularPolygon - + Sketcher - + Create regular polygon - + Create a regular polygon in the sketcher - + Triangle - + Square - + Pentagon - + Hexagon - + Heptagon - + Octagon - + Regular Polygon @@ -380,27 +380,27 @@ CmdSketcherCompModifyKnotMultiplicity - + Sketcher - + Modify knot multiplicity - + Modifies the multiplicity of the selected knot of a B-spline - + Increase knot multiplicity - + Decrease knot multiplicity @@ -408,17 +408,17 @@ CmdSketcherConnect - + Sketcher - + Connect Edges - + Link end point of element with next elements' starting point @@ -426,17 +426,17 @@ CmdSketcherConstrainAngle - + Sketcher - + Constrain angle - + Fix the angle of a line or the angle between two lines @@ -444,17 +444,17 @@ CmdSketcherConstrainBlock - + Sketcher - + Constrain Block - + Create a Block constraint on the selected item @@ -462,17 +462,17 @@ CmdSketcherConstrainCoincident - + Sketcher - + Constrain coincident - + Create a coincident constraint on the selected item @@ -480,17 +480,17 @@ CmdSketcherConstrainDiameter - + Sketcher - + Constrain diameter - + Fix the diameter of a circle or an arc @@ -498,17 +498,17 @@ CmdSketcherConstrainDistance - + Sketcher - + Constrain distance - + Fix a length of a line or the distance between a line and a vertex @@ -516,17 +516,17 @@ CmdSketcherConstrainDistanceX - + Sketcher - + Constrain horizontal distance - + Fix the horizontal distance between two points or line ends @@ -534,17 +534,17 @@ CmdSketcherConstrainDistanceY - + Sketcher - + Constrain vertical distance - + Fix the vertical distance between two points or line ends @@ -552,17 +552,17 @@ CmdSketcherConstrainEqual - + Sketcher - + Constrain equal - + Create an equality constraint between two lines or between circles and arcs @@ -570,17 +570,17 @@ CmdSketcherConstrainHorizontal - + Sketcher - + Constrain horizontally - + Create a horizontal constraint on the selected item @@ -588,17 +588,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher - + Constrain InternalAlignment - + Constrains an element to be aligned with the internal geometry of another element @@ -606,17 +606,17 @@ CmdSketcherConstrainLock - + Sketcher - + Constrain lock - + Create a lock constraint on the selected item @@ -624,17 +624,17 @@ CmdSketcherConstrainParallel - + Sketcher - + Constrain parallel - + Create a parallel constraint between two lines @@ -642,17 +642,17 @@ CmdSketcherConstrainPerpendicular - + Sketcher - + Constrain perpendicular - + Create a perpendicular constraint between two lines @@ -660,17 +660,17 @@ CmdSketcherConstrainPointOnObject - + Sketcher - + Constrain point onto object - + Fix a point onto an object @@ -678,17 +678,17 @@ CmdSketcherConstrainRadius - + Sketcher - + Constrain radius - + Fix the radius of a circle or an arc @@ -696,17 +696,17 @@ CmdSketcherConstrainSnellsLaw - + Sketcher - + Constrain refraction (Snell's law') - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. @@ -714,17 +714,17 @@ CmdSketcherConstrainSymmetric - + Sketcher - + Constrain symmetrical - + Create a symmetry constraint between two points with respect to a line or a third point @@ -732,17 +732,17 @@ CmdSketcherConstrainTangent - + Sketcher - + Constrain tangent - + Create a tangent constraint between two entities @@ -750,17 +750,17 @@ CmdSketcherConstrainVertical - + Sketcher - + Constrain vertically - + Create a vertical constraint on the selected item @@ -768,17 +768,17 @@ CmdSketcherConvertToNURB - + Sketcher - + Convert Geometry to B-spline - + Converts the given Geometry to a B-spline @@ -786,17 +786,17 @@ CmdSketcherCopy - + Sketcher - + Copy - + Creates a simple copy of the geometry taking as reference the last selected point @@ -804,17 +804,17 @@ CmdSketcherCreate3PointArc - + Sketcher - + Create arc by three points - + Create an arc by its end points and a point along the arc @@ -822,17 +822,17 @@ CmdSketcherCreate3PointCircle - + Sketcher - + Create circle by three points - + Create a circle by 3 perimeter points @@ -840,17 +840,17 @@ CmdSketcherCreateArc - + Sketcher - + Create arc by center - + Create an arc by its center and by its end points @@ -858,17 +858,17 @@ CmdSketcherCreateArcOfEllipse - + Sketcher - + Create an arc of ellipse - + Create an arc of ellipse in the sketch @@ -876,17 +876,17 @@ CmdSketcherCreateArcOfHyperbola - + Sketcher - + Create an arc of hyperbola - + Create an arc of hyperbola in the sketch @@ -894,17 +894,17 @@ CmdSketcherCreateArcOfParabola - + Sketcher - + Create an arc of parabola - + Create an arc of parabola in the sketch @@ -912,17 +912,17 @@ CmdSketcherCreateBSpline - + Sketcher - + Create B-spline - + Create a B-spline via control points in the sketch. @@ -930,17 +930,17 @@ CmdSketcherCreateCircle - + Sketcher - + Create circle - + Create a circle in the sketch @@ -948,17 +948,17 @@ CmdSketcherCreateDraftLine - + Sketcher - + Create draft line - + Create a draft line in the sketch @@ -966,17 +966,17 @@ CmdSketcherCreateEllipseBy3Points - + Sketcher - + Create ellipse by 3 points - + Create an ellipse by 3 points in the sketch @@ -984,17 +984,17 @@ CmdSketcherCreateEllipseByCenter - + Sketcher - + Create ellipse by center - + Create an ellipse by center in the sketch @@ -1002,17 +1002,17 @@ CmdSketcherCreateFillet - + Sketcher - + Create fillet - + Create a fillet between two lines or at a coincident point @@ -1020,17 +1020,17 @@ CmdSketcherCreateHeptagon - + Sketcher - + Create heptagon - + Create a heptagon in the sketch @@ -1038,17 +1038,17 @@ CmdSketcherCreateHexagon - + Sketcher - + Create hexagon - + Create a hexagon in the sketch @@ -1056,17 +1056,17 @@ CmdSketcherCreateLine - + Sketcher - + Create line - + Create a line in the sketch @@ -1074,17 +1074,17 @@ CmdSketcherCreateOctagon - + Sketcher - + Create octagon - + Create an octagon in the sketch @@ -1092,17 +1092,17 @@ CmdSketcherCreatePentagon - + Sketcher - + Create pentagon - + Create a pentagon in the sketch @@ -1110,17 +1110,17 @@ CmdSketcherCreatePeriodicBSpline - + Sketcher - + Create periodic B-spline - + Create a periodic B-spline via control points in the sketch. @@ -1128,17 +1128,17 @@ CmdSketcherCreatePoint - + Sketcher - + Create point - + Create a point in the sketch @@ -1146,17 +1146,17 @@ CmdSketcherCreatePolyline - + Sketcher - + Create polyline - + Create a polyline in the sketch. 'M' Key cycles behaviour @@ -1164,17 +1164,17 @@ CmdSketcherCreateRectangle - + Sketcher - + Create rectangle - + Create a rectangle in the sketch @@ -1182,17 +1182,17 @@ CmdSketcherCreateRegularPolygon - + Sketcher - + Create regular polygon - + Create a regular polygon in the sketch @@ -1200,17 +1200,17 @@ CmdSketcherCreateSlot - + Sketcher - + Create slot - + Create a slot in the sketch @@ -1218,17 +1218,17 @@ CmdSketcherCreateSquare - + Sketcher - + Create square - + Create a square in the sketch @@ -1236,17 +1236,17 @@ CmdSketcherCreateText - + Sketcher - + Create text - + Create text in the sketch @@ -1254,17 +1254,17 @@ CmdSketcherCreateTriangle - + Sketcher - + Create equilateral triangle - + Create an equilateral triangle in the sketch @@ -1272,17 +1272,17 @@ CmdSketcherDecreaseKnotMultiplicity - + Sketcher - + Decrease multiplicity - + Decreases the multiplicity of the selected knot of a B-spline @@ -1290,17 +1290,17 @@ CmdSketcherDeleteAllConstraints - + Sketcher - + Delete All Constraints - + Deletes all the constraints @@ -1308,17 +1308,17 @@ CmdSketcherDeleteAllGeometry - + Sketcher - + Delete All Geometry - + Deletes all the geometry and constraints but external geometry @@ -1344,17 +1344,17 @@ CmdSketcherExtend - + Sketcher - + Extend edge - + Extend an edge with respect to the picked position @@ -1362,17 +1362,17 @@ CmdSketcherExternal - + Sketcher - + External geometry - + Create an edge linked to an external geometry @@ -1380,17 +1380,17 @@ CmdSketcherIncreaseDegree - + Sketcher - + Increase degree - + Increases the degree of the B-spline @@ -1398,17 +1398,17 @@ CmdSketcherIncreaseKnotMultiplicity - + Sketcher - + Increase knot multiplicity - + Increases the multiplicity of the selected knot of a B-spline @@ -1505,17 +1505,17 @@ CmdSketcherMove - + Sketcher - + Move - + Moves the geometry taking as reference the last selected point @@ -1541,18 +1541,18 @@ CmdSketcherRectangularArray - + Sketcher - + Rectangular Array - - Creates an rectangular array pattern of the geometry taking as reference the last selected point + + Creates a rectangular array pattern of the geometry taking as reference the last selected point @@ -1577,17 +1577,17 @@ CmdSketcherRestoreInternalAlignmentGeometry - + Sketcher - + Show/hide internal geometry - + Show all internal geometry / hide unused internal geometry @@ -1595,13 +1595,13 @@ CmdSketcherSelectConflictingConstraints - + Sketcher + - Select Conflicting Constraints @@ -1609,17 +1609,17 @@ CmdSketcherSelectConstraints - + Sketcher - + Select Constraints - + Select the constraints associated to the selected elements @@ -1627,13 +1627,13 @@ CmdSketcherSelectElementsAssociatedWithConstraints - + Sketcher + - Select Elements associated with constraints @@ -1641,17 +1641,17 @@ CmdSketcherSelectElementsWithDoFs - + Sketcher - + Select solver DoFs - + Select elements where the solver still detects unconstrained degrees of freedom. @@ -1659,17 +1659,17 @@ CmdSketcherSelectHorizontalAxis - + Sketcher - + Select Horizontal Axis - + Select the horizontal axis @@ -1677,17 +1677,17 @@ CmdSketcherSelectOrigin - + Sketcher - + Select Origin - + Select the origin point @@ -1695,13 +1695,13 @@ CmdSketcherSelectRedundantConstraints - + Sketcher + - Select Redundant Constraints @@ -1709,17 +1709,17 @@ CmdSketcherSelectVerticalAxis - + Sketcher - + Select Vertical Axis - + Select the vertical axis @@ -1727,17 +1727,17 @@ CmdSketcherSwitchVirtualSpace - + Sketcher - + Switch virtual space - + Switches the selected constraints or the view to the other virtual space @@ -1745,17 +1745,17 @@ CmdSketcherSymmetry - + Sketcher - + Symmetry - + Creates symmetric geometry with respect to the last selected line or point @@ -1781,17 +1781,17 @@ CmdSketcherToggleDrivingConstraint - + Sketcher - + Toggle reference/driving constraint - + Toggles the toolbar or selected constraints to/from reference mode @@ -1799,17 +1799,17 @@ CmdSketcherTrimming - + Sketcher - + Trim edge - + Trim an edge with respect to the picked position @@ -1881,82 +1881,82 @@ Exceptions - + Autoconstrain error: Unsolvable sketch while applying coincident constraints. - + Autoconstrain error: Unsolvable sketch while applying vertical/horizontal constraints. - + Autoconstrain error: Unsolvable sketch while applying equality constraints. - + Autoconstrain error: Unsolvable sketch without constraints. - + Autoconstrain error: Unsolvable sketch after applying horizontal and vertical constraints. - + Autoconstrain error: Unsolvable sketch after applying point-on-point constraints. - + Autoconstrain error: Unsolvable sketch after applying equality constraints. - + Unable to guess intersection of curves. Try adding a coincident constraint between the vertices of the curves you are intending to fillet. - + This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher. - + BSpline Geometry Index (GeoID) is out of bounds. - + You are requesting no change in knot multiplicity. - + The Geometry Index (GeoId) provided is not a B-spline curve. - + The knot index is out of bounds. Note that in accordance with OCC notation, the first knot has index 1 and not zero. - + The multiplicity cannot be increased beyond the degree of the B-spline. - + The multiplicity cannot be decreased beyond zero. - + OCC is unable to decrease the multiplicity within the maximum tolerance. @@ -2024,134 +2024,134 @@ - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - - - + + + - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Wrong selection @@ -2163,11 +2163,11 @@ - - - - - + + + + + Dimensional constraint @@ -2182,285 +2182,285 @@ - - - + + + Only sketch and its support is allowed to select - + One of the selected has to be on the sketch - - + + Select an edge from the sketch. - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + Impossible constraint - - - - + + + + The selected edge is not a line segment - - - - - - + + + + + + Double constraint - - - - + + + + The selected edge already has a horizontal constraint! - - - - + + + + The selected edge already has a vertical constraint! - - - - - - + + + + + + The selected edge already has a Block constraint! - + The selected item(s) can't accept a horizontal constraint! - + There are more than one fixed point selected. Select a maximum of one fixed point! - + The selected item(s) can't accept a vertical constraint! - + There are more than one fixed points selected. Select a maximum of one fixed point! - - + + Select vertices from the sketch. - + Select one vertex from the sketch other than the origin. - + Select only vertices from the sketch. The last selected vertex may be the origin. - + Wrong solver status - + A Block constraint cannot be added if the sketch is unsolved or there are redundant and/or conflicting constraints. - + Select one edge from the sketch. - + Select only edges from the sketch. - - - - - - - - + + + + + + + + Error - + Select two or more points from the sketch. - - + + Select two or more vertexes from the sketch. - - + + Constraint Substitution - + Endpoint to endpoint tangency was applied instead. - + Select vertexes from the sketch. - - + + Select exactly one line or one point and one line or two points from the sketch. - + Cannot add a length constraint on an axis! - + This constraint does not make sense for non-linear curves - - - - - - + + + + + + Select the right things from the sketch. - - + + Point on B-spline edge currently unsupported. - - + + None of the selected points were constrained onto the respective curves, either because they are parts of the same element, or because they are both external geometry. - + Select either one point and several curves, or one curve and several points. You have selected %1 curves and %2 points. - - - - + + + + Select exactly one line or up to two points from the sketch. - + Cannot add a horizontal length constraint on an axis! - + Cannot add a fixed x-coordinate constraint on the origin point! - - + + This constraint only makes sense on a line segment or a pair of points - + Cannot add a vertical length constraint on an axis! - + Cannot add a fixed y-coordinate constraint on the origin point! - + Select two or more lines from the sketch. - - + + Select at least two lines from the sketch. - + Select a valid line - - + + The selected edge is not a valid line - + There is a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2468,45 +2468,45 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Select some geometry from the sketch. perpendicular constraint - + Wrong number of selected objects! perpendicular constraint - - + + With 3 objects, there must be 2 curves and 1 point. tangent constraint - - + + Cannot add a perpendicularity constraint at an unconnected point! - - - + + + Perpendicular to B-spline edge currently unsupported. - - + + One of the selected edges should be a line. - + There are a number of ways this constraint can be applied. Accepted combinations: two curves; an endpoint and a curve; two endpoints; two curves and a point. @@ -2514,382 +2514,382 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Select some geometry from the sketch. tangent constraint - + Wrong number of selected objects! tangent constraint - - - + + + Cannot add a tangency constraint at an unconnected point! - - - + + + Tangency to B-spline edge currently unsupported. - + Endpoint to endpoint tangency was applied. The coincident constraint was deleted. - - - - + + + + Select one or more arcs or circles from the sketch. - - + + Constrain equal - + Do you want to share the same radius for all selected elements? - - + + Constraint only applies to arcs or circles. - + Do you want to share the same diameter for all selected elements? - - + + Select one or two lines from the sketch. Or select two edges and a point. - - + + Parallel lines - - + + An angle constraint cannot be set for two parallel lines. - + Cannot add an angle constraint on an axis! - + Select two edges from the sketch. - - + + Select two or more compatible edges - + Sketch axes cannot be used in equality constraints - + Equality for B-spline edge currently unsupported. - - + + Select two or more edges of similar type - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. - - - - + + + + Cannot add a symmetry constraint between a line and its end points! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second - to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Selected objects are not just geometry from one sketch. - + Number of selected objects is not 3 (is %1). - + Cannot create constraint with external geometry only!! - + Incompatible geometry is selected! - + SnellsLaw on B-spline edge currently unsupported. - + Select at least one ellipse and one edge from the sketch. - + Sketch axes cannot be used in internal alignment constraint - + You cannot internally constrain an ellipse on other ellipse. Select only one ellipse. - - + + Maximum 2 points are supported. - - + + Maximum 2 lines are supported. - - + + Nothing to constrain - + Currently all internal geometry of the ellipse is already exposed. - - - - + + + + Extra elements - - - + + + More elements than possible for the given ellipse were provided. These were ignored. - - You cannot internally constrain an arc of ellipse on other arc of ellipse. Select only one arc of ellipse. + + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + Currently all internal geometry of the arc of ellipse is already exposed. - + More elements than possible for the given arc of ellipse were provided. These were ignored. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. - - - - - - + + + + + + Select constraint(s) from the sketch. - - + + CAD Kernel Error - + None of the selected elements is an edge. - + At least one of the selected objects was not a B-Spline and was ignored. + + + + Wrong OCE/OCC version + + - Wrong OCE/OCC version - - - - - This version of OCE/OCC does not support knot operation. You need 6.9.0 or higher - - + + The selection comprises more than one item. Please select just one knot. - + Input Error - - + + None of the selected elements is a knot of a B-spline - - - - + + + + Select at least two edges from the sketch. - - + + One selected edge is not connectable - + Closing a shape formed by exactly two lines makes no sense. - - - - - - - - + + + + + + + + Select elements from a single sketch. - + No constraint selected - + At least one constraint must be selected - + A symmetric construction requires at least two geometric elements, the last geometric element being the reference for the symmetry construction. - + The last element must be a point or a line serving as reference for the symmetry construction. - - + + A copy requires at least one selected non-external geometric element - + Delete All Geometry - + Are you really sure you want to delete all the geometry and constraints? - + Delete All Constraints - + Are you really sure you want to delete all the constraints? - + Distance constraint - + Not allowed to edit the datum because the sketch contains conflicting constraints @@ -2897,42 +2897,42 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::CarbonCopySelection - + Carbon copy would cause a circular dependency. - + This object is in another document. - + This object belongs to another body. Hold Ctrl to allow crossreferences. - + This object belongs to another body and it contains external geometry. Crossreference not allowed. - + This object belongs to another part. - + The selected sketch is not parallel to this sketch. Hold Ctrl+Alt to allow non-parallel sketches. - + The XY axes of the selected sketch do not have the same direction as this sketch. Hold Ctrl+Alt to disregard it. - + The origin of the selected sketch is not aligned with the origin of this sketch. Hold Ctrl+Alt to disregard it. @@ -2994,89 +2994,89 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::EditDatumDialog - + Insert angle - + Angle: - + Insert radius - - - + + + Radius: - + Insert diameter - - - + + + Diameter: - + Refractive index ratio Constraint_SnellsLaw - + Ratio n2/n1: Constraint_SnellsLaw - + Insert length - + Length: - - + + Change radius - - + + Change diameter - + Refractive index ratio - + Ratio n2/n1: @@ -3084,7 +3084,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ElementView - + Delete @@ -3092,22 +3092,22 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ExternalSelection - + Linking this will cause circular dependency. - + This object is in another document. - + This object belongs to another body, can't link. - + This object belongs to another part, can't link. @@ -3622,55 +3622,55 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::SketcherValidation - + No missing coincidences - + No missing coincidences found - + Missing coincidences - + %1 missing coincidences found - + No invalid constraints - + No invalid constraints found - + Invalid constraints - + Invalid constraints found - - - - + + + + Reversed external geometry - + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. %2 constraints are linking to the endpoints. The constraints have been listed in Report view (menu View -> Panels -> Report view). @@ -3679,51 +3679,51 @@ Click "Swap endpoints in constraints" button to reassign endpoints. Do - + %1 reversed external-geometry arcs were found. Their endpoints are encircled in 3d view. However, no constraints linking to the endpoints were found. - + No reversed external-geometry arcs were found. - + %1 changes were made to constraints linking to endpoints of reversed arcs. - - + + Constraint orientation locking - + Orientation locking was enabled and recomputed for %1 constraints. The constraints have been listed in Report view (menu View -> Panels -> Report view). - + Orientation locking was disabled for %1 constraints. The constraints have been listed in Report view (menu View -> Panels -> Report view). Note that for all future constraints, the locking still defaults to ON. - - + + Delete constraints to external geom. - + You are about to delete ALL constraints that deal with external geometry. This is useful to rescue a sketch with broken/changed links to external geometry. Are you sure you want to delete the constraints? - + All constraints that deal with external geometry were deleted. @@ -3830,105 +3830,105 @@ However, no constraints linking to the endpoints were found. - + Elements - + <html><head/><body><p>&quot;%1&quot;: multiple selection</p><p>&quot;%2&quot;: switch to next valid type</p></body></html> - - + + Point - - - + + + Line - - - - - - - - - + + + + + + + + + Construction - - - + + + Arc - - - + + + Circle - - - + + + Ellipse - - - + + + Elliptical Arc - - - + + + Hyperbolic Arc - - - + + + Parabolic Arc - - - + + + BSpline - - - + + + Other @@ -3979,7 +3979,7 @@ However, no constraints linking to the endpoints were found. SketcherGui::TaskSketcherMessages - + Solver messages @@ -3987,7 +3987,7 @@ However, no constraints linking to the endpoints were found. SketcherGui::TaskSketcherSolverAdvanced - + Advanced solver control @@ -4071,104 +4071,104 @@ However, no constraints linking to the endpoints were found. SketcherGui::ViewProviderSketch - + Edit sketch - + A dialog is already open in the task panel - + Do you want to close this dialog? - + Invalid sketch - + Do you want to open the sketch validation tool? - + The sketch is invalid and cannot be edited. - + Please remove the following constraint: - + Please remove at least one of the following constraints: - + Please remove the following redundant constraint: - + Please remove the following redundant constraints: - + Empty sketch - + Over-constrained sketch - - - + + + (click to select) - + Sketch contains conflicting constraints - + Sketch contains redundant constraints - + Fully constrained sketch - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff;">1 degree</span></a> of freedom - + Under-constrained sketch with <a href="#dofs"><span style=" text-decoration: underline; color:#0000ff;">%1 degrees</span></a> of freedom - + Solved in %1 sec - + Unsolved (%1 sec) @@ -4176,8 +4176,8 @@ However, no constraints linking to the endpoints were found. Sketcher_BSplineComb + - Switches between showing and hiding the curvature comb for all B-splines @@ -4185,8 +4185,8 @@ However, no constraints linking to the endpoints were found. Sketcher_BSplineDecreaseKnotMultiplicity + - Decreases the multiplicity of the selected knot of a B-spline @@ -4194,8 +4194,8 @@ However, no constraints linking to the endpoints were found. Sketcher_BSplineDegree + - Switches between showing and hiding the degree for all B-splines @@ -4203,8 +4203,8 @@ However, no constraints linking to the endpoints were found. Sketcher_BSplineIncreaseKnotMultiplicity + - Increases the multiplicity of the selected knot of a B-spline @@ -4212,8 +4212,8 @@ However, no constraints linking to the endpoints were found. Sketcher_BSplineKnotMultiplicity + - Switches between showing and hiding the knot multiplicity for all B-splines @@ -4221,8 +4221,8 @@ However, no constraints linking to the endpoints were found. Sketcher_BSplinePolygon + - Switches between showing and hiding the control polygons for all B-splines @@ -4230,8 +4230,8 @@ However, no constraints linking to the endpoints were found. Sketcher_Clone + - Creates a clone of the geometry taking as reference the last selected point @@ -4239,17 +4239,17 @@ However, no constraints linking to the endpoints were found. Sketcher_CompCopy - + Clone - + Copy - + Move @@ -4257,8 +4257,8 @@ However, no constraints linking to the endpoints were found. Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc @@ -4266,8 +4266,8 @@ However, no constraints linking to the endpoints were found. Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc @@ -4275,8 +4275,8 @@ However, no constraints linking to the endpoints were found. Sketcher_Copy + - Creates a simple copy of the geometry taking as reference the last selected point @@ -4284,8 +4284,8 @@ However, no constraints linking to the endpoints were found. Sketcher_Create3PointArc - - + + Create an arc by its end points and a point along the arc @@ -4293,8 +4293,8 @@ However, no constraints linking to the endpoints were found. Sketcher_Create3PointCircle - - + + Create a circle by 3 rim points @@ -4302,8 +4302,8 @@ However, no constraints linking to the endpoints were found. Sketcher_CreateArc - - + + Create an arc by its center and by its end points @@ -4311,8 +4311,8 @@ However, no constraints linking to the endpoints were found. Sketcher_CreateArcOfEllipse - - + + Create an arc of ellipse by its center, major radius, endpoints @@ -4320,8 +4320,8 @@ However, no constraints linking to the endpoints were found. Sketcher_CreateArcOfHyperbola - - + + Create an arc of hyperbola by its center, major radius, endpoints @@ -4329,8 +4329,8 @@ However, no constraints linking to the endpoints were found. Sketcher_CreateArcOfParabola - - + + Create an arc of parabola by its focus, vertex, endpoints @@ -4338,13 +4338,13 @@ However, no constraints linking to the endpoints were found. Sketcher_CreateBSpline - + B-spline by control points - - + + Create a B-spline by control points @@ -4352,8 +4352,8 @@ However, no constraints linking to the endpoints were found. Sketcher_CreateCircle - - + + Create a circle by its center and by a rim point @@ -4361,8 +4361,8 @@ However, no constraints linking to the endpoints were found. Sketcher_CreateEllipseBy3Points - - + + Create a ellipse by periapsis, apoapsis, and minor radius @@ -4370,8 +4370,8 @@ However, no constraints linking to the endpoints were found. Sketcher_CreateEllipseByCenter - - + + Create an ellipse by center, major radius and point @@ -4379,8 +4379,8 @@ However, no constraints linking to the endpoints were found. Sketcher_CreateHeptagon - - + + Create a heptagon by its center and by one corner @@ -4388,8 +4388,8 @@ However, no constraints linking to the endpoints were found. Sketcher_CreateHexagon - - + + Create a hexagon by its center and by one corner @@ -4397,14 +4397,14 @@ However, no constraints linking to the endpoints were found. Sketcher_CreateOctagon - - + + Create an octagon by its center and by one corner - - + + Create a regular polygon by its center and by one corner @@ -4412,8 +4412,8 @@ However, no constraints linking to the endpoints were found. Sketcher_CreatePentagon - - + + Create a pentagon by its center and by one corner @@ -4421,8 +4421,8 @@ However, no constraints linking to the endpoints were found. Sketcher_CreateSquare - - + + Create a square by its center and by one corner @@ -4430,8 +4430,8 @@ However, no constraints linking to the endpoints were found. Sketcher_CreateTriangle - - + + Create an equilateral triangle by its center and by one corner @@ -4439,13 +4439,13 @@ However, no constraints linking to the endpoints were found. Sketcher_Create_Periodic_BSpline - + Periodic B-spline by control points - - + + Create a periodic B-spline by control points @@ -4517,8 +4517,8 @@ However, no constraints linking to the endpoints were found. Sketcher_Move + - Moves the geometry taking as reference the last selected point diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts index e3d639f154..535fe43ccd 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet.ts @@ -147,7 +147,7 @@ - Merge selected cells in spreadsheet + Merge selected cells @@ -177,7 +177,7 @@ - Split previously merged cells in spreadsheet + Split previously merged cells @@ -192,7 +192,7 @@ - Set bold text in selected cells + Set text in selected cells bold @@ -207,7 +207,7 @@ - Set italic text in selected cells + Set text in selected cells italic @@ -426,7 +426,7 @@ - Custom + Custom Color diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage.ts b/src/Mod/Start/Gui/Resources/translations/StartPage.ts index f41aa7b010..a651e5143b 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage.ts @@ -154,8 +154,8 @@ - - See all commits on github + + You can configure a custom folder to display here in menu Edit -> Preferences -> Start -> Show additional folder @@ -208,11 +208,6 @@ Notes - - - Notes - - Workbench @@ -222,11 +217,6 @@ Start page - - - Start page - - CmdStartPage diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts index bfb48488b8..40547946fe 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts @@ -4,13 +4,13 @@ CmdTechDrawAnnotation - + TechDraw - - + + Insert Annotation @@ -18,17 +18,17 @@ CmdTechDrawArchView - + TechDraw - + Insert a Section Plane - + Inserts a view of a Section Plane from Arch Workbench @@ -36,13 +36,13 @@ CmdTechDrawClip - + TechDraw - - + + Insert Clip group @@ -50,17 +50,17 @@ CmdTechDrawClipMinus - + TechDraw - + Remove View from ClipGroup - + Remove a View from Clip group @@ -68,17 +68,17 @@ CmdTechDrawClipPlus - + TechDraw - + Add View to Clip group - + Add a View to Clip group @@ -86,17 +86,17 @@ CmdTechDrawDraftView - + TechDraw - + Insert a DraftWB object - + Insert a View of a Draft Workbench object @@ -104,17 +104,17 @@ CmdTechDrawExportPage - + File - + Export page as SVG - + Export a page to an SVG file @@ -122,27 +122,27 @@ CmdTechDrawExportPageDxf - + File - + Export page as DXF - + Export a page to a DXF file - + Save Dxf File - + Dxf (*.dxf) @@ -150,32 +150,46 @@ CmdTechDrawImage - + TechDraw - + Insert bitmap image - - + + Inserts a bitmap from a file into a Page - + Select an Image File - + Image (*.png *.jpg *.jpeg) + + CmdTechDrawLeaderLine + + + TechDraw + + + + + + Add a line to a view + + + CmdTechDrawLinkDimension @@ -218,6 +232,20 @@ + + CmdTechDrawNewBalloon + + + TechDraw + + + + + + Insert a new balloon + + + CmdTechDrawNewDiameterDimension @@ -293,13 +321,13 @@ CmdTechDrawNewGeomHatch - + TechDraw - - + + Apply geometric hatch to a Face @@ -307,13 +335,13 @@ CmdTechDrawNewHatch - + TechDraw - - + + Hatch a Face using image file @@ -335,23 +363,23 @@ CmdTechDrawNewPage - + TechDraw - + Insert new Page using Template - + Select a Template File - + Template (*.svg *.dxf) @@ -359,13 +387,13 @@ CmdTechDrawNewPageDef - + TechDraw - + Insert new default Page @@ -387,13 +415,13 @@ CmdTechDrawNewView - + TechDraw - + Insert View in Page @@ -401,13 +429,13 @@ CmdTechDrawNewViewDetail - + TechDraw - - + + Insert Detail View @@ -415,13 +443,13 @@ CmdTechDrawNewViewSection - + TechDraw - - + + Insert Section View in Page @@ -429,17 +457,17 @@ CmdTechDrawProjGroup - + TechDraw - + Insert Projection Group - + Insert multiple linked views of drawable object(s) @@ -447,31 +475,45 @@ CmdTechDrawRedrawPage - + TechDraw - - + + Redraw a page + + CmdTechDrawRichAnno + + + TechDraw + + + + + + Add a rich text annotation + + + CmdTechDrawSpreadsheet - + TechDraw - + Insert Spreadsheet view - + Inserts a view of a selected spreadsheet @@ -479,17 +521,17 @@ CmdTechDrawSymbol - + TechDraw - + Insert SVG Symbol - + Insert symbol from a svg file @@ -497,112 +539,347 @@ CmdTechDrawToggleFrame - + TechDraw - - + + Turn View Frames On/Off + + MRichTextEdit + + + Save changes + + + + + Close editor + + + + + Paragraph formatting + + + + + Undo (CTRL+Z) + + + + + Undo + + + + + + Redo + + + + + Cut (CTRL+X) + + + + + Cut + + + + + Copy (CTRL+C) + + + + + Copy + + + + + Paste (CTRL+V) + + + + + Paste + + + + + Link (CTRL+L) + + + + + Link + + + + + Bold + + + + + Italic (CTRL+I) + + + + + Italic + + + + + Underline (CTRL+U) + + + + + Underline + + + + + Strikethrough + + + + + Strike Out + + + + + Bullet list (CTRL+-) + + + + + Ordered list (CTRL+=) + + + + + Decrease indentation (CTRL+,) + + + + + Decrease indentation + + + + + Increase indentation (CTRL+.) + + + + + Increase indentation + + + + + Text foreground color + + + + + Text background color + + + + + Background + + + + + Font size + + + + + + More functions + + + + + Standard + + + + + Heading 1 + + + + + Heading 2 + + + + + Heading 3 + + + + + Heading 4 + + + + + Monospace + + + + + Remove character formatting + + + + + Remove all formatting + + + + + Edit document source + + + + + Document source + + + + + Create a link + + + + + Link URL: + + + + + Select an image + + + + + JPEG (*.jpg);; GIF (*.gif);; PNG (*.png);; BMP (*.bmp);; All (*) + + + QObject - - - - - - - - - - - - - - + + + + + + + + + + + + + + Wrong selection - - + + No Shapes or Groups in this selection - - + + Select at least 1 DrawViewPart object as Base. - - Select 1 Clip group and 1 View. + + Select one Clip group and one View. - + Select exactly one View to add to group. - + Select exactly one Clip group. - + Clip and View must be from same Page. - + Select exactly one View to remove from Group. - + View does not belong to a Clip - + Choose an SVG file to open - + Scalable Vector Graphic - - + + Select at least one object. - + There is no Section Plane in selection. - + Select exactly one Spreadsheet object. - + No Drawing View - + Open Drawing View before attempting export to SVG. @@ -617,8 +894,8 @@ - - + + Incorrect Selection @@ -664,33 +941,41 @@ + + + + - - - + + + Incorrect selection + Select an object first + Too many objects selected + Create a page first. + No View of a Part in selection. @@ -701,33 +986,61 @@ - + + + Task In Progress + + + + + + Close active task dialog and try again. + + + + + + Selection Error + + + + + Can not attach leader. No base View selected. + + + + + You must select a base View for the line. + + + + No TechDraw Page - + Need a TechDraw Page for this command - + Select a Face first - + No TechDraw object in selection - + Create a page to insert. - - + + No Faces to hatch in this selection @@ -762,48 +1075,43 @@ - + PDF (*.pdf) - - + + All Files (*.*) - + Export Page As PDF - + SVG (*.svg) - + Export page as SVG - - %1.%2.%3 - - - - + FreeCAD SVG Export - + Show drawing - + Toggle KeepUpdated @@ -812,6 +1120,26 @@ Click to update text + + + New Leader Line + + + + + Edit Leader Line + + + + + Rich text creator + + + + + Rich text editor + + TechDrawGui::DlgPrefsTechDraw2Imp @@ -821,37 +1149,37 @@ - + Arrow Style - + Show Units - + Color - + Font Size - + Diameter Symbol - + ⌀ - + Alternate Decimals @@ -861,148 +1189,213 @@ - + Use Global Decimals - + Preferred arrowhead style - + 0 - Filled Triangle - + 1 - Open Arrowhead - + 2 - Tick - + 3 - Dot - + 4 - Open Circle - + Arrow Size - + + Append unit to Dimension text + + + + + Dimension text color + + + + + Character to use to indicate Diameter dimension + + + + + Use system setting for decimal places. + + + + + Number of decimal places if not using Global Decimals + + + + Dimension font size in units - + Dimension arrowhead size in units - + + Default Format + + + + + Custom format for Dimension text + + + + Decorations - + + Color for centerlines + + + + Adjusts size of vertices in drawing - + Vertex Scale - + + Round or Square outline in Detail view + + + + Round - + Square - + Section Line Style - + Center Line Style - + Matting Style - - + + Line type for centerlines + + + + + NeverShow - + + Line color for sectionlines + + + + Line Group Name - + + Name of entry in LineGroup CSV file + + + + Vertex Color - - + + Vertex display color + + + + + Dash - - + + Dot - - + + DashDot - - + + DashDotDot - - + + Solid - + Center Line Color - + Section Line Color @@ -1249,56 +1642,76 @@ TechDrawGui::MDIViewPage - + &Export SVG - + Toggle &Keep Updated - + Toggle &Frames - + + Export DXF + + + + + Export PDF + + + + Different orientation - + The printer uses a different orientation than the drawing. Do you want to continue? - - + + Different paper size - - + + The printer uses a different paper size than the drawing. Do you want to continue? - + Opening file failed - + Can not open file %1 for writing. - + + Save Dxf File + + + + + Dxf (*.dxf) + + + + Selected: @@ -1306,12 +1719,12 @@ Do you want to continue? TechDrawGui::QGVPage - + Drawing page: - + exported from FreeCAD document: @@ -1379,6 +1792,142 @@ Do you want to continue? + + TechDrawGui::TaskLeaderLine + + + Leader Line + + + + + Base View + + + + + Select Line Points + + + + + Start Symbol + + + + + + No Symbol + + + + + + Filled Triangle + + + + + + Open Triangle + + + + + + Tick + + + + + + + Dot + + + + + + Open Circle + + + + + End Symbol + + + + + Color + + + + + Weight + + + + + Style + + + + + NoLine + + + + + Solid + + + + + Dash + + + + + DashDot + + + + + DashDotDot + + + + + + Pick a starting point for leader line + + + + + Click and drag markers to adjust leader line + + + + + ESC or RMB to exit + + + + + Left click to set a point + + + + + Press OK or Cancel to continue + + + + + In progress edit abandoned. Start over. + + + TechDrawGui::TaskLinkDim @@ -1596,6 +2145,34 @@ Do you want to continue? + + TechDrawGui::TaskRichAnno + + + Rich Text Annotation Block + + + + + Max Width + + + + + Base Feature + + + + + Show Frame + + + + + Start Rich Text Editor + + + TechDrawGui::TaskSectionView diff --git a/src/Mod/Web/Gui/Resources/translations/Web.ts b/src/Mod/Web/Gui/Resources/translations/Web.ts index b78c964149..6881b42d98 100644 --- a/src/Mod/Web/Gui/Resources/translations/Web.ts +++ b/src/Mod/Web/Gui/Resources/translations/Web.ts @@ -51,6 +51,20 @@ + + CmdWebBrowserSetURL + + + Web + + + + + + Set URL + + + CmdWebBrowserStop @@ -115,12 +129,12 @@ QObject - + Browser - + File does not exist! @@ -128,18 +142,18 @@ WebGui::BrowserView - - + + Error - + There were errors while loading the file. Some data might have been modified or not recovered at all. Look in the report view for more specific information about the objects involved. - + Loading %1... @@ -147,15 +161,20 @@ WebGui::WebView - + Open in External Browser - + Open in new window + + + View source + + Workbench