diff --git a/src/Mod/Path/Gui/Resources/panels/AxisMapEdit.ui b/src/Mod/Path/Gui/Resources/panels/AxisMapEdit.ui index 6607d007f4..043c5a9f56 100644 --- a/src/Mod/Path/Gui/Resources/panels/AxisMapEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/AxisMapEdit.ui @@ -24,7 +24,7 @@ - <html><head/><body><p>The radius of the wrapped axis</p></body></html> + The radius of the wrapped axis mm @@ -41,7 +41,7 @@ - <html><head/><body><p>The input mapping axis. Coordinates of the first axis will be mapped to the second.</p></body></html> + The input mapping axis. Coordinates of the first axis will be mapped to the second. 1 diff --git a/src/Mod/Path/Gui/Resources/panels/DlgJobCreate.ui b/src/Mod/Path/Gui/Resources/panels/DlgJobCreate.ui index 3aa3512f2c..37da174006 100644 --- a/src/Mod/Path/Gui/Resources/panels/DlgJobCreate.ui +++ b/src/Mod/Path/Gui/Resources/panels/DlgJobCreate.ui @@ -29,7 +29,7 @@ true - <html><head/><body><p>Select a template to be used for the job.</p><p>In case there are no templates you can create one through the popup menu of an existing job. Name the file job_*.json and place it in the macro or the path directory (see preferences) in order to be selectable from this list.</p></body></html> + Select a template to be used for the job. In case there are no templates you can create one through the popup menu of an existing job. Name the file job_*.json and place it in the macro or the path directory (see preferences) in order to be selectable from this list. diff --git a/src/Mod/Path/Gui/Resources/panels/DlgJobTemplateExport.ui b/src/Mod/Path/Gui/Resources/panels/DlgJobTemplateExport.ui index d1d05acd9b..681b70b1d0 100644 --- a/src/Mod/Path/Gui/Resources/panels/DlgJobTemplateExport.ui +++ b/src/Mod/Path/Gui/Resources/panels/DlgJobTemplateExport.ui @@ -17,7 +17,7 @@ - <html><head/><body><p>If enabled include all post processing settings in the template.</p></body></html> + If enabled include all post processing settings in the template. Post Processing @@ -35,7 +35,7 @@ Qt::NoFocus - <html><head/><body><p>Hint about the current post processing configuration.</p></body></html> + Hint about the current post processing configuration. @@ -45,7 +45,7 @@ - <html><head/><body><p>If enabled tool controller definitions are stored in the template.</p></body></html> + If enabled tool controller definitions are stored in the template. Tools @@ -57,7 +57,7 @@ - <html><head/><body><p>Check all tool controllers which should be included in the template.</p></body></html> + Check all tool controllers which should be included in the template. @@ -67,7 +67,9 @@ - <html><head/><body><p>Enable to include values of the SetupSheet in the template.</p><p>Any values of the SetupSheet that are changed from their default are preselected. If this field not selected the current SetupSheet was not modified.</p></body></html> + Enable to include values of the SetupSheet in the template. + +Any values of the SetupSheet that are changed from their default are preselected. If this field not selected the current SetupSheet was not modified. Setup Sheet @@ -79,7 +81,7 @@ - <html><head/><body><p>Enable to include the default heights for operations in the template.</p></body></html> + Enable to include the default heights for operations in the template. Operation Heights @@ -102,7 +104,7 @@ - <html><head/><body><p>Enable to include the default rapid tool speeds in the template.</p></body></html> + Enable to include the default rapid tool speeds in the template. Tool Rapid Speeds @@ -115,7 +117,7 @@ - <html><head/><body><p>Enable to include the default coolant mode in the template.</p></body></html> + Enable to include the default coolant mode in the template. Coolant Mode @@ -128,7 +130,11 @@ - <html><head/><body><p>Enable all Operations for which the configuration values should be exported.</p><p><br/></p><p>Note that only operations are listed which currently have configuration values setup.</p></body></html> + Enable all Operations for which the configuration values should be exported. + +<br/> + +Note that only operations are listed which currently have configuration values setup. @@ -138,7 +144,11 @@ - <html><head/><body><p>If enabled the creation of stock is included in the template. If a template does not include a stock definition the default stock creation algorithm will be used (creation from the Base object's bounding box).</p><p>This option is most useful if stock is a box or cylinder, or if the machine has a standard placement for machining.</p><p>Note that this option is disabled if a stock object from an existing solid is used in the job - they cannot be stored in a template.</p></body></html> + If enabled the creation of stock is included in the template. If a template does not include a stock definition the default stock creation algorithm will be used (creation from the Base object's bounding box). + +This option is most useful if stock is a box or cylinder, or if the machine has a standard placement for machining. + +Note that this option is disabled if a stock object from an existing solid is used in the job - they cannot be stored in a template. Stock @@ -150,7 +160,11 @@ - <html><head/><body><p>If enabled the current size settings for the stock object are included in the template.</p><p>For Box and Cylinder stocks this means the actual size of the stock solid being created.</p><p>For stock from the Base object's bounding box it means the extra material in all directions. A stock object created from such a template will get its basic size from the new job's Base object and apply the stored extra settings.</p></body></html> + If enabled the current size settings for the stock object are included in the template. + +For Box and Cylinder stocks this means the actual size of the stock solid being created. + +For stock from the Base object's bounding box it means the extra material in all directions. A stock object created from such a template will get its basic size from the new job's Base object and apply the stored extra settings. Extent @@ -169,14 +183,14 @@ Qt::NoFocus - <html><head/><body><p>Hint about the current stock extent setting.</p></body></html> + Hint about the current stock extent setting. - <html><head/><body><p>If enabled the current placement of the stock solid is stored in the template.</p></body></html> + If enabled the current placement of the stock solid is stored in the template. Placement @@ -195,7 +209,7 @@ Qt::NoFocus - <html><head/><body><p>Hint about the current stock placement.</p></body></html> + Hint about the current stock placement. diff --git a/src/Mod/Path/Gui/Resources/panels/DlgSelectPostProcessor.ui b/src/Mod/Path/Gui/Resources/panels/DlgSelectPostProcessor.ui index 82c34ef23a..1fd5407d75 100644 --- a/src/Mod/Path/Gui/Resources/panels/DlgSelectPostProcessor.ui +++ b/src/Mod/Path/Gui/Resources/panels/DlgSelectPostProcessor.ui @@ -39,7 +39,7 @@ - <html><head/><body><p>Select one of the post processors.</p><p>FreeCAD comes with several post processors pre-installed, please make sure at least one of them is enabled in your preferences.</p></body></html> + Select one of the post processors. FreeCAD comes with several post processors pre-installed, please make sure at least one of them is enabled in your preferences. diff --git a/src/Mod/Path/Gui/Resources/panels/DogboneEdit.ui b/src/Mod/Path/Gui/Resources/panels/DogboneEdit.ui index 0441ada8b2..537172faee 100644 --- a/src/Mod/Path/Gui/Resources/panels/DogboneEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/DogboneEdit.ui @@ -84,7 +84,7 @@ - <html><head/><body><p>On which side of the profile bones are inserted - this also determines which corners are dressed up. The default value is determined based on the profile being dressed up.</p></body></html> + On which side of the profile bones are inserted - this also determines which corners are dressed up. The default value is determined based on the profile being dressed up. 1 diff --git a/src/Mod/Path/Gui/Resources/panels/DragKnifeEdit.ui b/src/Mod/Path/Gui/Resources/panels/DragKnifeEdit.ui index 84388a76c9..6548f2ad9d 100644 --- a/src/Mod/Path/Gui/Resources/panels/DragKnifeEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/DragKnifeEdit.ui @@ -24,7 +24,7 @@ - <html><head/><body><p>Angles less than filter angle will not receive corner actions</p></body></html> + Angles less than filter angle will not receive corner actions deg @@ -41,7 +41,7 @@ - <html><head/><body><p>Distance the point trails behind the spindle</p></body></html> + Distance the point trails behind the spindle mm @@ -67,7 +67,7 @@ - <html><head/><body><p>Height to raise during corner action</p></body></html> + Height to raise during corner action mm diff --git a/src/Mod/Path/Gui/Resources/panels/DressUpLeadInOutEdit.ui b/src/Mod/Path/Gui/Resources/panels/DressUpLeadInOutEdit.ui index 0682699e3c..fff08282e9 100644 --- a/src/Mod/Path/Gui/Resources/panels/DressUpLeadInOutEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/DressUpLeadInOutEdit.ui @@ -311,7 +311,7 @@ - <html><head/><body><p>Apply Lead In/Out on all layers</p></body></html> + Apply Lead In/Out on all layers Include Layers diff --git a/src/Mod/Path/Gui/Resources/panels/DressupPathBoundary.ui b/src/Mod/Path/Gui/Resources/panels/DressupPathBoundary.ui index f1e58324e2..9381ede8f7 100644 --- a/src/Mod/Path/Gui/Resources/panels/DressupPathBoundary.ui +++ b/src/Mod/Path/Gui/Resources/panels/DressupPathBoundary.ui @@ -35,7 +35,7 @@ - <html><head/><body><p>Select what type of shape to use to constrain the underlying Path.</p></body></html> + Select what type of shape to use to constrain the underlying Path. 2 @@ -84,7 +84,7 @@ - <html><head/><body><p>Select the body to be used to constrain the underlying Path.</p></body></html> + Select the body to be used to constrain the underlying Path. @@ -104,7 +104,7 @@ - <html><head/><body><p>Extension of bounding box's MinX.</p></body></html> + Extension of bounding box's MinX @@ -117,7 +117,7 @@ - <html><head/><body><p>Extension of bounding box's MaxX.</p></body></html> + Extension of bounding box's MaxX @@ -131,14 +131,14 @@ - <html><head/><body><p>Extension of bounding box's MinY.</p></body></html> + Extension of bounding box's MinY - <html><head/><body><p>Extension of bounding box's MaxY.</p></body></html> + Extension of bounding box's MaxY @@ -152,14 +152,14 @@ - <html><head/><body><p>Extension of bounding box's MinZ.</p></body></html> + Extension of bounding box's MinZ - <html><head/><body><p>Extension of bounding box's MaxZ.</p></body></html> + Extension of bounding box's MaxZ @@ -179,7 +179,7 @@ - <html><head/><body><p>Radius of the Cylinder.</p></body></html> + Radius of the Cylinder @@ -193,7 +193,7 @@ - <html><head/><body><p>Height of the Cylinder.</p></body></html> + Height of the Cylinder @@ -213,7 +213,7 @@ - <html><head/><body><p>Length of the Box.</p></body></html> + Length of the Box @@ -227,7 +227,7 @@ - <html><head/><body><p>Width of the Box.</p></body></html> + Width of the Box @@ -241,7 +241,7 @@ - <html><head/><body><p>Height of the Box.</p></body></html> + Height of the Box @@ -254,7 +254,7 @@ - <html><head/><body><p>I checked the path is constrained by the solid. Otherwise the volume of the solid describes a &quot;keep out&quot; zone.</p></body></html> + If checked the path is constrained by the solid. Otherwise the volume of the solid describes a 'keep out' zone Constrained to Inside diff --git a/src/Mod/Path/Gui/Resources/panels/HoldingTagsEdit.ui b/src/Mod/Path/Gui/Resources/panels/HoldingTagsEdit.ui index d893feebb9..341765258a 100644 --- a/src/Mod/Path/Gui/Resources/panels/HoldingTagsEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/HoldingTagsEdit.ui @@ -44,21 +44,21 @@ - <html><head/><body><p>Width of the resulting holding tag.</p></body></html> + Width of the resulting holding tag. - <html><head/><body><p>Height of holding tag.</p><p>Note that resulting tag might be smaller if the tag's width and angle result in a triangular shape.</p></body></html> + Height of holding tag. Note that resulting tag might be smaller if the tag's width and angle result in a triangular shape. - <html><head/><body><p>Plunge angle for ascent and descent of holding tag.</p></body></html> + Plunge angle for ascent and descent of holding tag. 5.000000000000000 @@ -84,7 +84,7 @@ - <html><head/><body><p>Radius of the fillet at the top.</p><p>If the radius is too big for the tag shape it gets reduced to the maximum possible radius - resulting in a spherical shape.</p></body></html> + Radius of the fillet at the top. If the radius is too big for the tag shape it gets reduced to the maximum possible radius - resulting in a spherical shape. @@ -94,7 +94,7 @@ - <html><head/><body><p>List of current tags. Edit coordinates by double click or Edit button.</p><p>Tags are automatically disabled if they overlap with the previous tag, or don't lie on the base wire.</p></body></html> + List of current tags. Edit coordinates by double click or Edit button. Tags are automatically disabled if they overlap with the previous tag, or don't lie on the base wire. diff --git a/src/Mod/Path/Gui/Resources/panels/PageBaseGeometryEdit.ui b/src/Mod/Path/Gui/Resources/panels/PageBaseGeometryEdit.ui index e18987585c..1c34d1a870 100644 --- a/src/Mod/Path/Gui/Resources/panels/PageBaseGeometryEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/PageBaseGeometryEdit.ui @@ -33,7 +33,7 @@ - <html><head/><body><p>List of operations with Base Geometry in current Job.</p></body></html> + List of operations with Base Geometry in current Job @@ -56,7 +56,7 @@ - <html><head/><body><p>Select one or more features in the 3d view and press 'Add' to add them as the base items for this operation.</p><p><br/></p><p>Selected features can be deleted entirely.</p></body></html> + Select one or more features in the 3d view and press 'Add' to add them as the base items for this operation. Selected features can be deleted entirely. QAbstractItemView::ExtendedSelection @@ -66,7 +66,7 @@ - <html><head/><body><p>Add selected features to the list of base geometries for this operation.</p></body></html> + Add selected features to the list of base geometries for this operation Add @@ -76,7 +76,7 @@ - <html><head/><body><p>Remove the selected list items from the list of base geometries. The operation will not be applied to them.</p></body></html> + Remove the selected list items from the list of base geometries. The operation will not be applied to them. Remove @@ -86,7 +86,7 @@ - <html><head/><body><p>Clears list of base geometries.</p></body></html> + Clears list of base geometries Clear @@ -96,7 +96,7 @@ - All objects will be processed using the same operation properties + All objects will be processed using the same operation properties. Qt::AlignCenter diff --git a/src/Mod/Path/Gui/Resources/panels/PageBaseHoleGeometryEdit.ui b/src/Mod/Path/Gui/Resources/panels/PageBaseHoleGeometryEdit.ui index 644df7a083..c4f1f22cf3 100644 --- a/src/Mod/Path/Gui/Resources/panels/PageBaseHoleGeometryEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/PageBaseHoleGeometryEdit.ui @@ -19,7 +19,11 @@ - <html><head/><body><p>Table of hole features and the determined radius of the associated hole.</p><p><br/></p><p>You can add feature for processing by selecting them and then pressing Add. If a feature is accidentally added to the list it can be removed through Remove and will no longer be processed.</p><p><br/></p><p>Reset deletes all current items from the list and fills the list with all circular holes eligible for the operation from the model. You can again refine the list afterwards by enabling/disabling, removing and adding features.</p></body></html> + Table of hole features and the determined radius of the associated hole. + +You can add feature for processing by selecting them and then pressing Add. If a feature is accidentally added to the list it can be removed through Remove and will no longer be processed. + +Reset deletes all current items from the list and fills the list with all circular holes eligible for the operation from the model. You can again refine the list afterwards by enabling/disabling, removing and adding features. true @@ -39,7 +43,7 @@ - <html><head/><body><p>Add selected items from 3d view to the list of base geometries.</p></body></html> + Add selected items from 3d view to the list of base geometries Add @@ -49,7 +53,7 @@ - <html><head/><body><p>Remove selected list items from the list of base geometries. The operation is no longer applied to them.</p></body></html> + Remove selected list items from the list of base geometries. The operation is no longer applied to them. Remove @@ -59,7 +63,7 @@ - <html><head/><body><p>Remove all list items and fill list with all eligible features from the job's base object.</p></body></html> + Remove all list items and fill list with all eligible features from the job's base object. Reset diff --git a/src/Mod/Path/Gui/Resources/panels/PageBaseLocationEdit.ui b/src/Mod/Path/Gui/Resources/panels/PageBaseLocationEdit.ui index 083c51c50a..14c06ab1bf 100644 --- a/src/Mod/Path/Gui/Resources/panels/PageBaseLocationEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/PageBaseLocationEdit.ui @@ -17,7 +17,7 @@ - <html><head/><body><p>List of locations to be processed.</p></body></html> + List of locations to be processed. @@ -37,7 +37,7 @@ - <html><head/><body><p>Opens a dialog to add arbitrary locations.</p></body></html> + Opens a dialog to add arbitrary locations. Add @@ -47,7 +47,7 @@ - <html><head/><body><p>Remove selected location from the list. The operation is no longer applied to them.</p></body></html> + Remove selected location from the list. The operation is no longer applied to them. Remove @@ -57,7 +57,7 @@ - <html><head/><body><p>Edit selected location.</p></body></html> + Edit selected location. Edit diff --git a/src/Mod/Path/Gui/Resources/panels/PageDepthsEdit.ui b/src/Mod/Path/Gui/Resources/panels/PageDepthsEdit.ui index 35c384d1b6..8df9f0660c 100644 --- a/src/Mod/Path/Gui/Resources/panels/PageDepthsEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/PageDepthsEdit.ui @@ -43,7 +43,7 @@ - <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> + Start Depth of the operation. The highest point in Z-axis the operation needs to process. -999999999.000000000000000 @@ -56,7 +56,7 @@ - <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> + Transfer the Z value of the selected feature as the Start Depth for the operation. ... @@ -89,7 +89,7 @@ - <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. -999999999.000000000000000 @@ -102,7 +102,7 @@ - <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> + Transfer the Z value of the selected feature as the Final Depth for the operation. ... @@ -135,7 +135,7 @@ - <html><head/><body><p>The depth in Z-axis the operation moves downwards between layers.</p><p>This value depends on the tool being used, the material to be cut, available cooling and many other factors. Please consult the tool manufacturers data sheets for the proper value.</p></body></html> + The depth in Z-axis the operation moves downwards between layers. This value depends on the tool being used, the material to be cut, available cooling and many other factors. Please consult the tool manufacturers data sheets for the proper value. -999999999.000000000000000 @@ -167,7 +167,7 @@ - <html><head/><body><p>Depth of the final cut of the operation. Can be used to produce a cleaner finish.</p></body></html> + Depth of the final cut of the operation. Can be used to produce a cleaner finish. -999999999.000000000000000 diff --git a/src/Mod/Path/Gui/Resources/panels/PageDiametersEdit.ui b/src/Mod/Path/Gui/Resources/panels/PageDiametersEdit.ui index a31fa8ccad..31914324e7 100644 --- a/src/Mod/Path/Gui/Resources/panels/PageDiametersEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/PageDiametersEdit.ui @@ -24,7 +24,7 @@ - <html><head/><body><p>Start Depth of the operation. The highest point in Z-axis the operation needs to process.</p></body></html> + Start Depth of the operation. The highest point in Z-axis the operation needs to process. Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter @@ -40,7 +40,7 @@ - <html><head/><body><p>Transfer the Z value of the selected feature as the Start Depth for the operation.</p></body></html> + Transfer the Z value of the selected feature as the Start Depth for the operation. ... @@ -61,7 +61,7 @@ - <html><head/><body><p>The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process.</p></body></html> + The depth of the operation which corresponds to the lowest value in Z-axis the operation needs to process. Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter @@ -77,7 +77,7 @@ - <html><head/><body><p>Transfer the Z value of the selected feature as the Final Depth for the operation.</p></body></html> + Transfer the Z value of the selected feature as the Final Depth for the operation. ... diff --git a/src/Mod/Path/Gui/Resources/panels/PageHeightsEdit.ui b/src/Mod/Path/Gui/Resources/panels/PageHeightsEdit.ui index c9cf8dbb8e..2ab1457682 100644 --- a/src/Mod/Path/Gui/Resources/panels/PageHeightsEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/PageHeightsEdit.ui @@ -28,7 +28,7 @@ - <html><head/><body><p>The height above which it is safe to move the tool bit with rapid movements. Below this height all lateral and downward movements are performed with feed rate speeds.</p></body></html> + The height above which it is safe to move the tool bit with rapid movements. Below this height all lateral and downward movements are performed with feed rate speeds. Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter @@ -51,7 +51,7 @@ - <html><head/><body><p>The height where lateral movement of the toolbit is not obstructed by any fixtures or the part / stock material itself.</p></body></html> + The height where lateral movement of the toolbit is not obstructed by any fixtures or the part / stock material itself. Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter diff --git a/src/Mod/Path/Gui/Resources/panels/PageOpAdaptiveEdit.ui b/src/Mod/Path/Gui/Resources/panels/PageOpAdaptiveEdit.ui index 89ef4c99df..b9499d5556 100644 --- a/src/Mod/Path/Gui/Resources/panels/PageOpAdaptiveEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/PageOpAdaptiveEdit.ui @@ -73,7 +73,7 @@ - <html><head/><body><p>Type of adaptive operation</p></body></html> + Type of adaptive operation @@ -152,7 +152,7 @@ - <html><head/><body><p>Influences calculation performance vs stability and accuracy</p></body></html> + Influences calculation performance vs stability and accuracy 5 @@ -180,7 +180,7 @@ - <html><head/><body><p>Cut inside or outside of the selected shapes</p></body></html> + Cut inside or outside of the selected shapes @@ -194,7 +194,7 @@ - <html><head/><body><p>If &gt;0 it limits the helix ramp diameter</p><p>otherwise the 75 percent of tool diameter is used</p></body></html> + If greater than zero it limits the helix ramp diameter, otherwise 75 percent of tool diameter is used @@ -204,7 +204,7 @@ - <html><head/><body><p>How much to lift the tool up during the rapid linking moves over cleared regions.</p><p>If linking path is not clear tool is raised to clearence height.</p></body></html> + How much to lift the tool up during the rapid linking moves over cleared regions. If linking path is not clear tool is raised to clearance height. @@ -214,7 +214,7 @@ - <html><head/><body><p>Max length of keep-tool-down linking path compared to direct distance between points.</p><p>If exceeded link will be done by raising the tool to clearence height.</p></body></html> + Max length of keep-tool-down linking path compared to direct distance between points. If exceeded link will be done by raising the tool to clearance height. @@ -224,7 +224,7 @@ - <html><head/><body><p>How much material to leave (i.e. for finishing operation)</p></body></html> + How much material to leave (i.e. for finishing operation) @@ -234,7 +234,7 @@ - <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles. 1 @@ -253,7 +253,7 @@ - <html><head/><body><p>Angle of the helix ramp entry</p></body></html> + Angle of the helix ramp entry @@ -263,7 +263,7 @@ - <html><head/><body><p>Angle of the helix entry cone</p></body></html> + Angle of the helix entry cone diff --git a/src/Mod/Path/Gui/Resources/panels/PageOpCustomEdit.ui b/src/Mod/Path/Gui/Resources/panels/PageOpCustomEdit.ui index b30478ebab..37bde3b339 100644 --- a/src/Mod/Path/Gui/Resources/panels/PageOpCustomEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/PageOpCustomEdit.ui @@ -39,7 +39,7 @@ - <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> + The tool and its settings to be used for this operation. diff --git a/src/Mod/Path/Gui/Resources/panels/PageOpDeburrEdit.ui b/src/Mod/Path/Gui/Resources/panels/PageOpDeburrEdit.ui index 1941e4c923..b4f82f0fd5 100644 --- a/src/Mod/Path/Gui/Resources/panels/PageOpDeburrEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/PageOpDeburrEdit.ui @@ -57,7 +57,7 @@ - <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> + The tool and its settings to be used for this operation. @@ -89,7 +89,7 @@ - <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> + The tool and its settings to be used for this operation. @@ -135,7 +135,7 @@ - <html><head/><body><p>The direction in which the profile is performed, clockwise or counter clockwise.</p></body></html> + The direction in which the profile is performed, clockwise or counterclockwise. CW @@ -192,7 +192,7 @@ - <html><head/><body><p>Width of chamfer cut.</p></body></html> + Width of chamfer cut. mm @@ -219,7 +219,7 @@ - <html><head/><body><p>Extra depth of tool immersion.</p></body></html> + Extra depth of tool immersion. mm @@ -286,7 +286,7 @@ - <html><head/><body><p>Round joint</p></body></html> + Round joint @@ -305,7 +305,7 @@ - <html><head/><body><p>Miter joint</p></body></html> + Miter joint diff --git a/src/Mod/Path/Gui/Resources/panels/PageOpDrillingEdit.ui b/src/Mod/Path/Gui/Resources/panels/PageOpDrillingEdit.ui index 945865971f..34c34b534b 100644 --- a/src/Mod/Path/Gui/Resources/panels/PageOpDrillingEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/PageOpDrillingEdit.ui @@ -39,7 +39,7 @@ - <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> + The tool and its settings to be used for this operation. @@ -53,14 +53,14 @@ - <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> + The tool and its settings to be used for this operation. - <html><head/><body><p>Don't retract after every hole</p></body></html> + Don't retract after every hole Keep Tool Down diff --git a/src/Mod/Path/Gui/Resources/panels/PageOpEngraveEdit.ui b/src/Mod/Path/Gui/Resources/panels/PageOpEngraveEdit.ui index b160aa973e..4a19ef543f 100644 --- a/src/Mod/Path/Gui/Resources/panels/PageOpEngraveEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/PageOpEngraveEdit.ui @@ -33,7 +33,7 @@ - <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> + The tool and its settings to be used for this operation. @@ -47,7 +47,7 @@ - <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> + The tool and its settings to be used for this operation. @@ -67,7 +67,7 @@ - <html><head/><body><p>Specify the vertex number of the underlying shape string at which engraving should start.</p></body></html> + Specify the vertex number of the underlying shape string at which engraving should start. 999999 diff --git a/src/Mod/Path/Gui/Resources/panels/PageOpHelixEdit.ui b/src/Mod/Path/Gui/Resources/panels/PageOpHelixEdit.ui index 090b0574da..35219e28bc 100644 --- a/src/Mod/Path/Gui/Resources/panels/PageOpHelixEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/PageOpHelixEdit.ui @@ -33,7 +33,7 @@ - <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> + The tool and its settings to be used for this operation. @@ -47,7 +47,7 @@ - <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> + The tool and its settings to be used for this operation. @@ -67,7 +67,7 @@ - <html><head/><body><p>Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center.</p></body></html> + Specify if the helix operation should start at the inside and work its way outwards, or start at the outside and work its way to the center. @@ -91,7 +91,7 @@ - <html><head/><body><p>The direction for the helix, clockwise or counter clockwise.</p></body></html> + The direction for the helix, clockwise or counterclockwise. @@ -115,7 +115,7 @@ - <html><head/><body><p>Specify the percent of the tool diameter each helix will be offset to the previous one.</p><p><br/></p><p>A step over of 100% means no overlap of the individual cuts.</p></body></html> + Specify the percent of the tool diameter each helix will be offset to the previous one. A step over of 100% means no overlap of the individual cuts. 1 diff --git a/src/Mod/Path/Gui/Resources/panels/PageOpPocketExtEdit.ui b/src/Mod/Path/Gui/Resources/panels/PageOpPocketExtEdit.ui index 481745c3d5..8d9e7331c5 100644 --- a/src/Mod/Path/Gui/Resources/panels/PageOpPocketExtEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/PageOpPocketExtEdit.ui @@ -52,7 +52,7 @@ - <html><head/><body><p>If selected all potential extensions are visualised. Enabled extensions in purple and not enabled extensions in yellow.</p></body></html> + If selected all potential extensions are visualised. Enabled extensions in purple and not enabled extensions in yellow Show All @@ -62,7 +62,7 @@ - <html><head/><body><p>Extend the corner between two edges of a pocket. If selected adjacent edges are combined.</p></body></html> + Extend the corner between two edges of a pocket. If selected adjacent edges are combined Extend Corners @@ -82,7 +82,7 @@ - <html><head/><body><p>Set the extent of the dimension -the default value is half the tool diameter.</p></body></html> + Set the extent of the dimension -the default value is half the tool diameter -999999999.000000000000000 @@ -98,7 +98,7 @@ - <html><head/><body><p>Tree of existing edges and their potential extensions.</p></body></html> + Tree of existing edges and their potential extensions QAbstractItemView::NoEditTriggers @@ -123,7 +123,7 @@ - <html><head/><body><p>Enable the currently selected pocket extension.</p></body></html> + Enable the currently selected pocket extension Enable @@ -133,7 +133,7 @@ - <html><head/><body><p>Disable the currently selected pocket extension.</p></body></html> + Disable the currently selected pocket extension Disable @@ -143,7 +143,7 @@ - <html><head/><body><p>Remove all currently enabled extensions - leaving the plain pocket operation.</p></body></html> + Remove all currently enabled extensions - leaving the plain pocket operation Clear diff --git a/src/Mod/Path/Gui/Resources/panels/PageOpPocketFullEdit.ui b/src/Mod/Path/Gui/Resources/panels/PageOpPocketFullEdit.ui index 4d70159d0c..1f7bd6e8c3 100644 --- a/src/Mod/Path/Gui/Resources/panels/PageOpPocketFullEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/PageOpPocketFullEdit.ui @@ -33,7 +33,7 @@ - <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> + The tool and its settings to be used for this operation @@ -47,7 +47,7 @@ - <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> + The tool and its settings to be used for this operation @@ -67,7 +67,9 @@ - <html><head/><body><p>Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off.</p><p>The latter can be used to face of the entire stock area to ensure uniform heights for the following operations.</p></body></html> + Specify if the facing should be restricted by the actual shape of the selected face (or the part if no face is selected), or if the bounding box should be faced off. + +The latter can be used to face of the entire stock area to ensure uniform heights for the following operations @@ -90,7 +92,7 @@ - <html><head/><body><p>The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on.</p><p>Keeping that in mind climb mode is called when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bits rotation and the tools lateral movement are in the same direction.</p></body></html> + The cutting mode assumes that the cut on one side of the tool bit represents the resulting part and the other side is either already milled away or will be removed later on. Climb mode is when the tool bit is moved into the cut on each rotation, whereas in conventional mode the tool bit's rotation and the tool's lateral movement are in the same direction @@ -114,7 +116,7 @@ - <html><head/><body><p>Pattern the tool bit is moved in to clear the material.</p></body></html> + Pattern the tool bit is moved in to clear the material ZigZag @@ -166,7 +168,7 @@ - <html><head/><body><p>Angle in which the pattern is applied.</p></body></html> + Angle in which the pattern is applied @@ -180,7 +182,7 @@ - <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. A step over of 100% results in no overlap between two different cycles 1 @@ -206,7 +208,7 @@ - <html><head/><body><p>The amount of material that should be left by this operation in relation to the target shape.</p></body></html> + The amount of material that should be left by this operation in relation to the target shape @@ -219,7 +221,7 @@ - <html><head/><body><p>Specify if this operation uses a starting point.</p></body></html> + Specify if this operation uses a starting point Use Start Point @@ -229,7 +231,7 @@ - <html><head/><body><p>If selected the operation uses the outline of the selected base geometry and ignores all holes and islands.</p></body></html> + If selected the operation uses the outline of the selected base geometry and ignores all holes and islands Use Outline diff --git a/src/Mod/Path/Gui/Resources/panels/PageOpProbeEdit.ui b/src/Mod/Path/Gui/Resources/panels/PageOpProbeEdit.ui index 41bedca667..b45522999c 100644 --- a/src/Mod/Path/Gui/Resources/panels/PageOpProbeEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/PageOpProbeEdit.ui @@ -39,7 +39,7 @@ - <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> + The tool and its settings to be used for this operation @@ -142,7 +142,7 @@ - <html><head/><body><p>Enter the filename where the probe points should be written.</p></body></html> + Enter the filename where the probe points should be written ProbePoints.txt diff --git a/src/Mod/Path/Gui/Resources/panels/PageOpProfileFullEdit.ui b/src/Mod/Path/Gui/Resources/panels/PageOpProfileFullEdit.ui index e483c5452b..e02ce8ec04 100644 --- a/src/Mod/Path/Gui/Resources/panels/PageOpProfileFullEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/PageOpProfileFullEdit.ui @@ -33,7 +33,7 @@ - <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> + The tool and its settings to be used for this operation @@ -47,7 +47,7 @@ - <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> + The tool and its settings to be used for this operation @@ -67,7 +67,7 @@ - <html><head/><body><p>Specify if the profile should be performed inside or outside the base geometry features. This only matters if Use Compensation is checked (the default).</p></body></html> + Specify if the profile should be performed inside or outside the base geometry features. This only matters if Use Compensation is checked (the default) @@ -86,7 +86,7 @@ - <html><head/><body><p>The direction in which the profile is performed, clockwise or counter clockwise.</p></body></html> + The direction in which the profile is performed, clockwise or counterclockwise @@ -111,7 +111,7 @@ - <html><head/><body><p>The amount of extra material left by this operation in relation to the target shape.</p></body></html> + The amount of extra material left by this operation in relation to the target shape @@ -124,7 +124,7 @@ - <html><head/><body><p>Check if this operation should use a starting point.</p></body></html> + Check if this operation should use a starting point Use Start Point @@ -134,7 +134,7 @@ - <html><head/><body><p>Check if this profile operation should also process holes in the base geometry.</p><p><br/></p><p>Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters.</p><p><br/></p><p>Note that this does not include cylindrical holes, the assumption being that they will get drilled.</p></body></html> + Check if this profile operation should also process holes in the base geometry. Found holes are automatically offset on the opposite cut side and performed in the opposite direction as perimeters. Note that this does not include cylindrical holes, the assumption being that they will get drilled Process Holes @@ -144,7 +144,7 @@ - <html><head/><body><p>If checked the profile operation is offset by the tool radius. The offset direction is determined by the Cut Side.</p></body></html> + If checked the profile operation is offset by the tool radius. The offset direction is determined by the Cut Side Use Compensation @@ -154,7 +154,7 @@ - <html><head/><body><p>Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled.</p><p><br/></p><p>This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change.</p><p><br/></p><p>Note that the cut side and direction is reversed in respect to the specified values.</p></body></html> + Check if you want this profile operation to also be applied to cylindrical holes, which normally get drilled. This can be useful if no drill of adequate size is available or the number of holes don't warrant a tool change. Note that the cut side and direction is reversed in respect to the specified values Process Circles @@ -164,7 +164,7 @@ - <html><head/><body><p>Check if this profile operation should also process the outside perimeter of the base geometry shapes.</p></body></html> + Check if this profile operation should also process the outside perimeter of the base geometry shapes Process Perimeter diff --git a/src/Mod/Path/Gui/Resources/panels/PageOpSlotEdit.ui b/src/Mod/Path/Gui/Resources/panels/PageOpSlotEdit.ui index 24513ffc30..91bc94d268 100644 --- a/src/Mod/Path/Gui/Resources/panels/PageOpSlotEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/PageOpSlotEdit.ui @@ -39,7 +39,7 @@ - <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> + The tool and its settings to be used for this operation @@ -87,7 +87,7 @@ - <html><head/><body><p>Choose what point to use on the first selected feature.</p></body></html> + Choose what point to use on the first selected feature false @@ -159,7 +159,7 @@ - <html><head/><body><p>Choose what point to use on the second selected feature.</p></body></html> + Choose what point to use on the second selected feature false @@ -219,7 +219,7 @@ - <html><head/><body><p>No Base Geometry selected.</p></body></html> + No Base Geometry selected color:blue @@ -238,7 +238,7 @@ - <html><head/><body><p>Currently using custom point inputs in the Property View of the Data tab.</p></body></html> + Currently using custom point inputs in the Property View of the Data tab Currently using custom point inputs available in the Property View of the Data tab. @@ -288,7 +288,7 @@ - <html><head/><body><p>Positive extends the beginning of the path, negative shortens.</p></body></html> + Positive extends the beginning of the path, negative shortens @@ -314,7 +314,7 @@ - <html><head/><body><p>Positive extends the end of the path, negative shortens.</p></body></html> + Positive extends the end of the path, negative shortens @@ -354,7 +354,7 @@ - <html><head/><body><p>Complete the operation in a single pass at depth, or multiple passes to final depth.</p></body></html> + Complete the operation in a single pass at depth, or multiple passes to final depth @@ -378,7 +378,7 @@ - <html><head/><body><p>Choose the path orientation with regard to the feature(s) selected.</p></body></html> + Choose the path orientation with regard to the feature(s) selected @@ -395,7 +395,7 @@ - <html><head/><body><p>Enable to reverse the cut direction of the slot path.</p></body></html> + Enable to reverse the cut direction of the slot path Reverse cut direction diff --git a/src/Mod/Path/Gui/Resources/panels/PageOpSurfaceEdit.ui b/src/Mod/Path/Gui/Resources/panels/PageOpSurfaceEdit.ui index f60f3ca8cc..b92afb6e5e 100644 --- a/src/Mod/Path/Gui/Resources/panels/PageOpSurfaceEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/PageOpSurfaceEdit.ui @@ -33,7 +33,7 @@ - <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> + The tool and its settings to be used for this operation. @@ -47,7 +47,7 @@ - <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> + The tool and its settings to be used for this operation. @@ -67,7 +67,7 @@ - <html><head/><body><p>Select the overall boundary for the operation.</p></body></html> + Select the overall boundary for the operation. @@ -81,7 +81,7 @@ - <html><head/><body><p>Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan.</p></body></html> + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -95,7 +95,7 @@ - <html><head/><body><p>Complete the operation in a single pass at depth, or multiple passes to final depth.</p></body></html> + Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -109,7 +109,7 @@ - <html><head/><body><p>Set the geometric clearing pattern to use for the operation.</p></body></html> + Set the geometric clearing pattern to use for the operation. @@ -123,7 +123,7 @@ - <html><head/><body><p>Profile the edges of the selection.</p></body></html> + Profile the edges of the selection. @@ -137,7 +137,7 @@ - <html><head/><body><p>Avoid cutting the last 'N' faces in the Base Geometry list of selected faces.</p></body></html> + Avoid cutting the last 'N' faces in the Base Geometry list of selected faces. @@ -159,7 +159,7 @@ - <html><head/><body><p>Additional offset to the selected bounding box along the X axis."</p></body></html> + Additional offset to the selected bounding box along the X axis." mm @@ -169,7 +169,7 @@ - <html><head/><body><p>Additional offset to the selected bounding box along the Y axis."</p></body></html> + Additional offset to the selected bounding box along the Y axis." mm @@ -188,7 +188,7 @@ - <html><head/><body><p>Dropcutter lines are created parallel to this axis.</p></body></html> + Dropcutter lines are created parallel to this axis. @@ -202,7 +202,7 @@ - <html><head/><body><p>Set the Z-axis depth offset from the target surface.</p></body></html> + Set the Z-axis depth offset from the target surface. mm @@ -219,7 +219,9 @@ - <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. + +A step over of 100% results in no overlap between two different cycles. 1 @@ -239,7 +241,7 @@ - <html><head/><body><p>Set the sampling resolution. Smaller values quickly increase processing time.</p></body></html> + Set the sampling resolution. Smaller values quickly increase processing time. mm @@ -249,7 +251,7 @@ - <html><head/><body><p>Make True, if specifying a Start Point</p></body></html> + Make True, if specifying a Start Point Use Start Point @@ -259,7 +261,7 @@ - <html><head/><body><p>Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output.</p></body></html> + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Optimize Linear Paths @@ -269,7 +271,7 @@ - <html><head/><body><p>If true, the cutter will remain inside the boundaries of the model or selected face(s)</p></body></html> + If true, the cutter will remain inside the boundaries of the model or selected face(s) Boundary Enforcement @@ -282,7 +284,7 @@ - <html><head/><body><p>Enable separate optimization of transitions between, and breaks within, each step over path.</p></body></html> + Enable separate optimization of transitions between, and breaks within, each step over path. Optimize StepOver Transitions diff --git a/src/Mod/Path/Gui/Resources/panels/PageOpVcarveEdit.ui b/src/Mod/Path/Gui/Resources/panels/PageOpVcarveEdit.ui index 7a062e78fb..d073b7550e 100644 --- a/src/Mod/Path/Gui/Resources/panels/PageOpVcarveEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/PageOpVcarveEdit.ui @@ -33,7 +33,7 @@ - <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> + The tool and its settings to be used for this operation @@ -47,7 +47,7 @@ - <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> + The tool and its settings to be used for this operation @@ -60,7 +60,7 @@ - <html><head/><body><p><br/></p></body></html> + <br/></p></body></html> Discretization Deflection @@ -70,7 +70,7 @@ - <html><head/><body><p>This value is used in discretizing arcs into segments. Smaller values will result in larger gcode. Larger values may cause unwanted segments in the medial line path.</p></body></html> + This value is used in discretizing arcs into segments. Smaller values will result in larger gcode. Larger values may cause unwanted segments in the medial line path. 3 @@ -92,7 +92,7 @@ - <html><head/><body><p><br/></p></body></html> + Filter Colinear lines @@ -102,7 +102,7 @@ - <html><head/><body><p>Sets how aggressively colinear segments are filtered from the voronoi diagram</p><p>Valid values are 0 - 90 degrees (larger numbers filter more)</p><p>Default = 10</p><p><br/></p></body></html> + Sets how aggressively colinear segments are filtered from the voronoi diagram. Valid values are 0 - 90 degrees (larger numbers filter more). Default = 10 90 diff --git a/src/Mod/Path/Gui/Resources/panels/PageOpWaterlineEdit.ui b/src/Mod/Path/Gui/Resources/panels/PageOpWaterlineEdit.ui index a306c7cc2b..79f463a76b 100644 --- a/src/Mod/Path/Gui/Resources/panels/PageOpWaterlineEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/PageOpWaterlineEdit.ui @@ -33,7 +33,7 @@ - <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> + The tool and its settings to be used for this operation. @@ -63,7 +63,7 @@ - <html><head/><body><p>Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based).</p></body></html> + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). @@ -88,7 +88,7 @@ - <html><head/><body><p>Select the overall boundary for the operation.</p></body></html> + Select the overall boundary for the operation. @@ -107,7 +107,7 @@ - <html><head/><body><p>Complete the operation in a single pass at depth, or multiple passes to final depth.</p></body></html> + Complete the operation in a single pass at depth, or multiple passes to final depth. @@ -126,7 +126,7 @@ - <html><head/><body><p>Set the geometric clearing pattern to use for the operation.</p></body></html> + Set the geometric clearing pattern to use for the operation. @@ -146,7 +146,7 @@ - <html><head/><body><p>Set the Z-axis depth offset from the target surface.</p></body></html> + Set the Z-axis depth offset from the target surface. mm @@ -169,7 +169,9 @@ - <html><head/><body><p>The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter.</p><p>A step over of 100% results in no overlap between two different cycles.</p></body></html> + The amount by which the tool is laterally displaced on each cycle of the pattern, specified in percent of the tool diameter. + +A step over of 100% results in no overlap between two different cycles. 1 @@ -189,7 +191,7 @@ - <html><head/><body><p>Set the sampling resolution. Smaller values quickly increase processing time.</p></body></html> + Set the sampling resolution. Smaller values quickly increase processing time. mm @@ -199,7 +201,7 @@ - <html><head/><body><p>Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output.</p></body></html> + Enable optimization of linear paths (co-linear points). Removes unnecessary co-linear points from G-code output. Optimize Linear Paths diff --git a/src/Mod/Path/Gui/Resources/panels/PathEdit.ui b/src/Mod/Path/Gui/Resources/panels/PathEdit.ui index 5c244c39de..15ced0d078 100644 --- a/src/Mod/Path/Gui/Resources/panels/PathEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/PathEdit.ui @@ -138,7 +138,31 @@ - <html><head/><body><p>Enter a path and optionally file name (see below) to be used as the default for the post processor export.</p><p>The following substitutions are performed before the name is resolved at the time of the post processing:</p><p>Substitution allows the following:</p><p>%D ... directory of the active document</p><p>%d ... name of the active document (with extension)</p><p>%M ... user macro directory</p><p>%j ... name of the active Job object</p><p><br/></p><p>The Following can be used if output is being split. If Output is not split</p><p>these will be ignored. </p><p>%T ... Tool Number</p><p>%t ... Tool Controller label</p><p><br/></p><p>%W ... Work Coordinate System</p><p>%O ... Operation Label</p><p><br/></p><p>When splitting output, a sequence number will always be added.</p><p><br/></p><p>if %S is included, you can specify where the number occurs. Without it, the number will be added to the end of the string.</p><p><br/></p><p>%S ... Sequence Number</p><p><br/></p><p>The following example store all files with the same name as the document the directory /home/freecad (please remove quotes):</p><p>&quot;/home/cnc/%d.g-code&quot;</p><p>See the file save policy below on how to deal with name conflicts.</p></body></html> + Enter a path and optionally file name (see below) to be used as the default for the post processor export. +The following substitutions are performed before the name is resolved at the time of the post-processing: +Substitution allows the following: +%D ... directory of the active document +%d ... name of the active document (with extension) +%M ... user macro directory +%j ... name of the active Job object + +The Following can be used if output is being split. If Output is not split +these will be ignored. +%T ... Tool Number +%t ... Tool Controller label + +%W ... Work Coordinate System +%O ... Operation Label + +When splitting output, a sequence number will always be added. + +if %S is included, you can specify where the number occurs. Without it, the number will be added to the end of the string. + +%S ... Sequence Number + +The following example store all files with the same name as the document the directory /home/freecad (please remove quotes): +"/home/cnc/%d.g-code" +See the file save policy below on how to deal with name conflicts. @@ -169,7 +193,7 @@ - <html><head/><body><p>Optional arguments passed to the Post Processor. The arguments are specific for each Post Processor, please see it's documentation for details.</p></body></html> + Optional arguments passed to the Post Processor. The arguments are specific for each Post Processor, please see its documentation for details. @@ -188,7 +212,13 @@ - <html><head/><body><p>Ordering by Fixture, will cause all operations to be performed in the first coordinate system before switching to the second. Then all operations will be performed there in the same order.</p><p>This is useful if the operator can safely load work into one coordinate system while the machine is doing work in another.</p><p>Ordering by Tool, will minimize the Tool Changes. A tool change will be done, then all operations in all coordinate systems before changing tools.</p><p>Ordering by operation will do each operation in all coordinate systems before moving to the next operation. This is especially useful in conjunction with the 'split output' even with only a single work coordinate system since it will put each operation into a separate file</p></body></html> + Ordering by Fixture, will cause all operations to be performed in the first coordinate system before switching to the second. Then all operations will be performed there in the same order. + +This is useful if the operator can safely load work into one coordinate system while the machine is doing work in another. + +Ordering by Tool, will minimize the Tool Changes. A tool change will be done, then all operations in all coordinate systems before changing tools. + +Ordering by operation will do each operation in all coordinate systems before moving to the next operation. This is especially useful in conjunction with the 'split output' even with only a single work coordinate system since it will put each operation into a separate file. @@ -221,7 +251,8 @@ - <html><head/><body><p><span style=" font-style:italic;">Work Coordinate Systems</span> also called <span style=" font-style:italic;">Work Offsets</span>, <span style=" font-style:italic;">Fixture Offsets</span>, or <span style=" font-style:italic;">Fixtures </span>are useful for building efficient production jobs where the same part is done many times on the machine.</p><p>FreeCAD has no knowledge of where a particular coordinate system exists within the machine coordinate system so adding additional coordinate systems to your job will have no visual change within your job. It will, however, change your gcode output. The exact way in which the output is affected is controlled by the 'order by' setting.</p></body></html> + <html><head/><body><p><span style=" font-style:italic;">Work Coordinate Systems</span> also called <span style=" font-style:italic;">Work Offsets</span>, <span style=" font-style:italic;">Fixture Offsets</span>, or <span style=" font-style:italic;">Fixtures </span>are useful for building efficient production jobs where the same part is done many times on the machine. +FreeCAD has no knowledge of where a particular coordinate system exists within the machine coordinate system so adding additional coordinate systems to your job will have no visual change within your job. It will, however, change your gcode output. The exact way in which the output is affected is controlled by the 'order by' setting.</p></body></html> QListView::Adjust @@ -363,10 +394,20 @@ - <html><head/><body><p>If multiple coordinate systems are in use, setting this to TRUE will cause the gcode to be written to multiple output files as controlled by the 'order by' property. For example, if ordering by Fixture, the first output file will be for the first fixture and separate file for the second.</p><p><br/></p><p><br/></p></body></html> + <html><head/><body><p>If multiple coordinate systems are in use, setting this to TRUE will cause the gcode to be written to multiple output files as controlled by the 'order by' property. For example, if ordering by Fixture, the first output file will be for the first fixture and separate file for the second. + + + +</p></body></html> - <html><head/><body><p>If True, post-processing will create multiple output files based on the <span style=" font-style:italic;">order by</span> setting.</p><p><br/></p><p>For example, if <span style=" font-style:italic;">order by</span> is set to Tool, the first output file will contain the first tool change and all operations, in all coordinate systems, that can be done with that tool before the next tool change is called.</p><p><br/></p><p>If <span style=" font-style:italic;">order by</span> is set to <span style=" font-style:italic;">operation</span> and <span style=" font-style:italic;">split output</span> is true, each operation will be written to a separate file.</p></body></html> + <html><head/><body><p>If True, post-processing will create multiple output files based on the <span style=" font-style:italic;">order by</span> setting. + + +For example, if <span style=" font-style:italic;">order by</span> is set to Tool, the first output file will contain the first tool change and all operations, in all coordinate systems, that can be done with that tool before the next tool change is called. + + +If <span style=" font-style:italic;">order by</span> is set to <span style=" font-style:italic;">operation</span> and <span style=" font-style:italic;">split output</span> is true, each operation will be written to a separate file.</p></body></html> Split Output @@ -997,7 +1038,10 @@ - <html><head/><body><p>Expression set as the StartDepth of a newly created operation.</p><p><br/></p><p>Default: OpStartDepth</p></body></html> + <html><head/><body><p>Expression set as the StartDepth of a newly created operation. + + +Default: OpStartDepth</p></body></html> @@ -1011,7 +1055,10 @@ - <html><head/><body><p>Expression set as the FinalDepth for a newly created operation.</p><p><br/></p><p>Default: OpFinalDepth</p></body></html> + <html><head/><body><p>Expression set as the FinalDepth for a newly created operation. + + +Default: OpFinalDepth</p></body></html> @@ -1025,7 +1072,10 @@ - <html><head/><body><p>Expression set as the StepDown of a newly created operation.</p><p><br/></p><p>Default: OpToolDiameter</p></body></html> + <html><head/><body><p>Expression set as the StepDown of a newly created operation. + + +Default: OpToolDiameter</p></body></html> @@ -1068,14 +1118,18 @@ - <html><head/><body><p>Expression set as ClearanceHeight for new operations.</p><p><br/></p><p>Default: &quot;OpStockZMax+SetupSheet.ClearanceHeightOffset&quot;</p></body></html> + Expression set as ClearanceHeight for new operations. + +Default: "OpStockZMax+SetupSheet.ClearanceHeightOffset" - <html><head/><body><p>ClearanceHeightOffset - can be used by expressions to set the default ClearanceHeight for new operations.</p><p><br/></p><p>Default: &quot;3 mm&quot;</p></body></html> + ClearanceHeightOffset - can be used by expressions to set the default ClearanceHeight for new operations. + +Default: "3 mm" @@ -1089,14 +1143,18 @@ - <html><head/><body><p>Expression set as SafeHeight for new operations.</p><p><br/></p><p>Default: &quot;OpStockZMax+SetupSheet.SafeHeightOffset&quot;</p></body></html> + Expression set as SafeHeight for new operations. + +Default: "OpStockZMax+SetupSheet.SafeHeightOffset" - <html><head/><body><p>SafeHeightOffset can be for expressions to set the SafeHeight for new operations.</p><p><br/></p><p>Default: &quot;5 mm&quot;</p></body></html> + SafeHeightOffset can be for expressions to set the SafeHeight for new operations. + +Default: "5mm" @@ -1193,7 +1251,7 @@ Feed - <html><head/><body><p>Horizontal Feed</p></body></html> + Horizontal Feed @@ -1205,7 +1263,7 @@ Feed - <html><head/><body><p>Vertical Feed</p></body></html> + Vertical Feed @@ -1293,7 +1351,7 @@ - <html><head/><body><p>Rapid horizontal speed assigned as HorizRapid to new ToolController.</p></body></html> + Rapid horizontal speed assigned as HorizRapid to new ToolController. @@ -1313,7 +1371,7 @@ - <html><head/><body><p>Rapid vertical speed assigned to VertRapid of new ToolController.</p></body></html> + Rapid vertical speed assigned to VertRapid of new ToolController. diff --git a/src/Mod/Path/Gui/Resources/panels/PropertyCreate.ui b/src/Mod/Path/Gui/Resources/panels/PropertyCreate.ui index cc6809dc6b..e0570a952e 100644 --- a/src/Mod/Path/Gui/Resources/panels/PropertyCreate.ui +++ b/src/Mod/Path/Gui/Resources/panels/PropertyCreate.ui @@ -24,14 +24,14 @@ - <html><head/><body><p>Name of property. Can only contain letters, numbers, and underscores. MixedCase names will display with spaces &quot;Mixed Case&quot;</p></body></html> + Name of property. Can only contain letters, numbers, and underscores. MixedCase names will display with spaces "Mixed Case" - <html><head/><body><p>The category group the property belongs to.</p></body></html> + The category group the property belongs to. true @@ -48,7 +48,7 @@ - <html><head/><body><p>The type of the property value.</p></body></html> + The type of the property value. @@ -69,7 +69,7 @@ - <html><head/><body><p>ToolTip to be displayed when user hovers mouse over property.</p></body></html> + ToolTip to be displayed when user hovers mouse over property. true @@ -114,7 +114,7 @@ - <html><head/><body><p>Check if you want to create several properties in a batch.</p></body></html> + Check if you want to create several properties in a batch. Create another diff --git a/src/Mod/Path/Gui/Resources/panels/SetupGlobal.ui b/src/Mod/Path/Gui/Resources/panels/SetupGlobal.ui index b641ef6be1..c9a9046a85 100644 --- a/src/Mod/Path/Gui/Resources/panels/SetupGlobal.ui +++ b/src/Mod/Path/Gui/Resources/panels/SetupGlobal.ui @@ -40,7 +40,9 @@ - <html><head/><body><p>Expression set as the StartDepth of a newly created operation.</p><p><br/></p><p>Default: OpStartDepth</p></body></html> + Expression set as the StartDepth of a newly created operation. + +Default: OpStartDepth @@ -54,7 +56,9 @@ - <html><head/><body><p>Expression set as the FinalDepth for a newly created operation.</p><p><br/></p><p>Default: OpFinalDepth</p></body></html> + Expression set as the FinalDepth for a newly created operation. + +Default: OpFinalDepth @@ -68,7 +72,9 @@ - <html><head/><body><p>Expression set as the StepDown of a newly created operation.</p><p><br/></p><p>Default: OpToolDiameter</p></body></html> + Expression set as the StepDown of a newly created operation. + +Default: OpToolDiameter @@ -111,14 +117,18 @@ - <html><head/><body><p>Expression set as ClearanceHeight for new operations.</p><p><br/></p><p>Default: &quot;OpStockZMax+SetupSheet.ClearanceHeightOffset&quot;</p></body></html> + Expression set as ClearanceHeight for new operations. + +Default: "OpStockZMax+SetupSheet.ClearanceHeightOffset" - <html><head/><body><p>ClearanceHeightOffset - can be used by expressions to set the default ClearanceHeight for new operations.</p><p><br/></p><p>Default: &quot;3 mm&quot;</p></body></html> + ClearanceHeightOffset - can be used by expressions to set the default ClearanceHeight for new operations. + +Default: "3 mm" @@ -132,14 +142,18 @@ - <html><head/><body><p>Expression set as SafeHeight for new operations.</p><p><br/></p><p>Default: &quot;OpStockZMax+SetupSheet.SafeHeightOffset&quot;</p></body></html> + Expression set as SafeHeight for new operations. + +Default: "OpStockZMax+SetupSheet.SafeHeightOffset" - <html><head/><body><p>SafeHeightOffset can be for expressions to set the SafeHeight for new operations.</p><p><br/></p><p>Default: &quot;5 mm&quot;</p></body></html> + SafeHeightOffset can be for expressions to set the SafeHeight for new operations. + +Default: "5mm" @@ -188,7 +202,7 @@ - <html><head/><body><p>Rapid horizontal speed assigned as HorizRapid to new ToolController.</p></body></html> + Rapid horizontal speed assigned as HorizRapid to new ToolController. @@ -208,7 +222,7 @@ - <html><head/><body><p>Rapid vertical speed assigned to VertRapid of new ToolController.</p></body></html> + Rapid vertical speed assigned to VertRapid of new ToolController. diff --git a/src/Mod/Path/Gui/Resources/panels/SurfaceEdit.ui b/src/Mod/Path/Gui/Resources/panels/SurfaceEdit.ui index 945a0a2f6d..9a557d7511 100644 --- a/src/Mod/Path/Gui/Resources/panels/SurfaceEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/SurfaceEdit.ui @@ -277,7 +277,7 @@ - <html><head/><body><p>The tool and its settings to be used for this operation.</p></body></html> + The tool and its settings to be used for this operation. diff --git a/src/Mod/Path/Gui/Resources/panels/ToolBitEditor.ui b/src/Mod/Path/Gui/Resources/panels/ToolBitEditor.ui index eb809f3008..7dae7882cb 100644 --- a/src/Mod/Path/Gui/Resources/panels/ToolBitEditor.ui +++ b/src/Mod/Path/Gui/Resources/panels/ToolBitEditor.ui @@ -52,7 +52,7 @@ - <html><head/><body><p>Display name of the Tool Bit (initial value taken from the shape file).</p></body></html> + Display name of the Tool Bit (initial value taken from the shape file). 50 @@ -93,7 +93,7 @@ - <html><head/><body><p>The file which defines the type and shape of the Tool Bit.</p></body></html> + The file which defines the type and shape of the Tool Bit. path @@ -103,7 +103,7 @@ - <html><head/><body><p>Change file defining type and shape of Tool Bit.</p></body></html> + Change file defining type and shape of Tool Bit. ... diff --git a/src/Mod/Path/Gui/Resources/panels/ToolBitLibraryEdit.ui b/src/Mod/Path/Gui/Resources/panels/ToolBitLibraryEdit.ui index b0c7e6ba1e..21a0dea14d 100644 --- a/src/Mod/Path/Gui/Resources/panels/ToolBitLibraryEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/ToolBitLibraryEdit.ui @@ -49,7 +49,7 @@ - <html><head/><body><p>Add existing Tool Bit to this library.</p><p><br/></p></body></html> + Add existing Tool Bit to this library. Add Existing @@ -69,7 +69,7 @@ - <html><head/><body><p>Delete selected Tool Bit(s) from the library.</p><p><br/></p></body></html> + Delete selected Tool Bit(s) from the library. Remove @@ -96,7 +96,7 @@ - <html><head/><body><p>Select a working path for the tool library editor.</p></body></html> + Select a working path for the tool library editor. @@ -116,7 +116,7 @@ - <html><head/><body><p>Add New Tool Table</p></body></html> + Add New Tool Table @@ -136,7 +136,7 @@ - <html><head/><body><p>Save the selected library with a new name or export to another format</p></body></html> + Save the selected library with a new name or export to another format @@ -187,7 +187,7 @@ true - <html><head/><body><p>Table of Tool Bits of the library.</p></body></html> + Table of Tool Bits of the library. QFrame::Box @@ -266,7 +266,7 @@ - <html><head/><body><p>Save the current Library</p></body></html> + Save the current Library Close diff --git a/src/Mod/Path/Gui/Resources/panels/ToolBitSelector.ui b/src/Mod/Path/Gui/Resources/panels/ToolBitSelector.ui index bea27ac51d..f54112a0ae 100644 --- a/src/Mod/Path/Gui/Resources/panels/ToolBitSelector.ui +++ b/src/Mod/Path/Gui/Resources/panels/ToolBitSelector.ui @@ -75,7 +75,7 @@ - <html><head/><body><p>Available Tool Bits to choose from.</p></body></html> + Available Tool Bits to choose from. QAbstractItemView::NoEditTriggers @@ -98,7 +98,7 @@ false - <html><head/><body><p>Create ToolControllers for the selected toolbits and add them to the Job</p></body></html> + Create ToolControllers for the selected toolbits and add them to the Job Add To Job diff --git a/src/Mod/Path/Gui/Resources/panels/ZCorrectEdit.ui b/src/Mod/Path/Gui/Resources/panels/ZCorrectEdit.ui index cabe10a7fc..ee9b5b874f 100644 --- a/src/Mod/Path/Gui/Resources/panels/ZCorrectEdit.ui +++ b/src/Mod/Path/Gui/Resources/panels/ZCorrectEdit.ui @@ -51,7 +51,7 @@ - <html><head/><body><p>Enter the filename containing the probe data</p></body></html> + Enter the filename containing the probe data diff --git a/src/Mod/Path/Gui/Resources/preferences/PathDressupHoldingTags.ui b/src/Mod/Path/Gui/Resources/preferences/PathDressupHoldingTags.ui index 5d539a51e7..a49aea9d9c 100644 --- a/src/Mod/Path/Gui/Resources/preferences/PathDressupHoldingTags.ui +++ b/src/Mod/Path/Gui/Resources/preferences/PathDressupHoldingTags.ui @@ -30,7 +30,9 @@ - <html><head/><body><p>Set the default width of holding tags.</p><p>If the width is set to 0 the dressup will try to guess a reasonable value based on the path itself.</p></body></html> + Set the default width of holding tags. + +If the width is set to 0 the dressup will try to guess a reasonable value based on the path itself. @@ -44,7 +46,9 @@ - <html><head/><body><p>Default height of holding tags.</p><p>If the specified height is 0 the dressup will use half the height of the part. Should the height be bigger than the height of the part the dressup will reduce the height to the height of the part.</p></body></html> + Default height of holding tags. + +If the specified height is 0 the dressup will use half the height of the part. Should the height be bigger than the height of the part the dressup will reduce the height to the height of the part. @@ -58,7 +62,7 @@ - <html><head/><body><p>Plunge angle for ascent and descent of holding tag.</p></body></html> + Plunge angle for ascent and descent of holding tag. 5.000000000000000 @@ -84,7 +88,9 @@ - <html><head/><body><p>Radius of the fillet on the tag's top edge.</p><p>If the radius is bigger than that which the tag shape itself supports, the resulting shape will be that of a dome.</p></body></html> + Radius of the fillet on the tag's top edge. + +If the radius is bigger than that which the tag shape itself supports, the resulting shape will be that of a dome. @@ -107,7 +113,7 @@ - <html><head/><body><p>Specify the number of tags generated when a new dressup is created.</p></body></html> + Specify the number of tags generated when a new dressup is created. 2 diff --git a/src/Mod/Path/Gui/Resources/preferences/PathJob.ui b/src/Mod/Path/Gui/Resources/preferences/PathJob.ui index 3db2580fc0..600af530d5 100644 --- a/src/Mod/Path/Gui/Resources/preferences/PathJob.ui +++ b/src/Mod/Path/Gui/Resources/preferences/PathJob.ui @@ -48,7 +48,9 @@ - <html><head/><body><p>Path to look for templates, post processors, tool tables and other external files.</p><p><br/></p><p>If left empty the macro directory is used.</p></body></html> + Path to look for templates, post processors, tool tables and other external files. + +If left empty the macro directory is used. @@ -69,7 +71,11 @@ - <html><head/><body><p>The default template to be selected when creating a new Job. </p><p><br/></p><p>This can be helpful when almost all jobs will be processed by the same machine with a similar setup.</p><p><br/></p><p>If left empty no template will be preselected.</p></body></html> + The default template to be selected when creating a new Job. + +This can be helpful when almost all jobs will be processed by the same machine with a similar setup. + +If left empty no template will be preselected. @@ -179,7 +185,31 @@ - <html><head/><body><p>Enter a path and optionally file name (see below) to be used as the default for the post processor export.</p><p>The following substitutions are performed before the name is resolved at the time of the post processing:</p><p>Substitution allows the following:</p><p>%D ... directory of the active document</p><p>%d ... name of the active document (with extension)</p><p>%M ... user macro directory</p><p>%j ... name of the active Job object</p><p><br/></p><p>The Following can be used if output is being split. If Output is not split</p><p>these will be ignored. </p><p>%T ... Tool Number</p><p>%t ... Tool Controller label</p><p><br/></p><p>%W ... Work Coordinate System</p><p>%O ... Operation Label</p><p><br/></p><p>When splitting output, a sequence number will always be added.</p><p><br/></p><p>if %S is included, you can specify where the number occurs. Without it, the number will be added to the end of the string.</p><p><br/></p><p>%S ... Sequence Number</p><p><br/></p><p>The following example store all files with the same name as the document the directory /home/freecad (please remove quotes):</p><p>&quot;/home/cnc/%d.g-code&quot;</p><p>See the file save policy below on how to deal with name conflicts.</p></body></html> + Enter a path and optionally file name (see below) to be used as the default for the post-processor export. +The following substitutions are performed before the name is resolved at the time of the post-processing: +Substitution allows the following: +%D ... directory of the active document +%d ... name of the active document (with extension) +%M ... user macro directory +%j ... name of the active Job object + +The Following can be used if output is being split. If Output is not split +these will be ignored. +%T ... Tool Number +%t ... Tool Controller label + +%W ... Work Coordinate System +%O ... Operation Label + +When splitting output, a sequence number will always be added. + +if %S is included, you can specify where the number occurs. Without it, the number will be added to the end of the string. + +%S ... Sequence Number + +The following example store all files with the same name as the document the directory /home/freecad (please remove quotes): +&quot;/home/cnc/%d.g-code&quot; +See the file save policy below on how to deal with name conflicts. @@ -214,7 +244,7 @@ - <html><head/><body><p>Choose how to deal with potential file name conflicts. Always open a dialog, only open a dialog if the output file already exists, overwrite any existing file or add a unique (3 digit) sequential ID to the file name.</p></body></html> + Choose how to deal with potential file name conflicts. Always open a dialog, only open a dialog if the output file already exists, overwrite any existing file or add a unique (3 digit) sequential ID to the file name. @@ -265,7 +295,7 @@ true - <html><head/><body><p>It doesn't seem there are any post processor scripts installed. Please add some into your macro directory and make sure the file name ends with &quot;_post.py&quot;.</p></body></html> + It doesn't seem there are any post processor scripts installed. Please add some into your macro directory and make sure the file name ends with &quot;_post.py&quot;. @@ -279,7 +309,7 @@ - <html><head/><body><p>Select one of the post processors as the default.</p></body></html> + Select one of the post processors as the default. DefaultPostProcessor @@ -299,7 +329,7 @@ - <html><head/><body><p>Optional arguments passed to the default Post Processor specified above. See the Post Processor's documentation for supported arguments.</p></body></html> + Optional arguments passed to the default Post Processor specified above. See the Post Processor's documentation for supported arguments. DefaultPostProcessorArgs @@ -620,7 +650,9 @@ - <html><head/><body><p>References to Tool Bits and their shapes can either be stored with an absolute path or with a relative path to the search path.</p><p>Generally it is recommended to use relative paths due to their flexibility and robustness to layout changes.</p><p>Should multiple tools or tool shapes with the same name exist in different directories it can be required to use absolute paths. </p></body></html> + References to Tool Bits and their shapes can either be stored with an absolute path or with a relative path to the search path. +Generally it is recommended to use relative paths due to their flexibility and robustness to layout changes. +Should multiple tools or tool shapes with the same name exist in different directories it can be required to use absolute paths. Store Absolute Paths