diff --git a/src/Mod/Arch/Resources/translations/Arch.ts b/src/Mod/Arch/Resources/translations/Arch.ts index f23dadef05..97bb03e1de 100644 --- a/src/Mod/Arch/Resources/translations/Arch.ts +++ b/src/Mod/Arch/Resources/translations/Arch.ts @@ -3362,7 +3362,7 @@ - + Successfully imported diff --git a/src/Mod/Draft/Resources/translations/Draft.ts b/src/Mod/Draft/Resources/translations/Draft.ts index 6ad2b93ed2..9d6a75db46 100644 --- a/src/Mod/Draft/Resources/translations/Draft.ts +++ b/src/Mod/Draft/Resources/translations/Draft.ts @@ -4949,22 +4949,22 @@ Note: C++ exporter is faster, but is not as featureful yet draft - + Draft Command Bar - + Toggle construction mode - + Autogroup off - + active command: @@ -4974,52 +4974,52 @@ Note: C++ exporter is faster, but is not as featureful yet - + Active Draft command - + X coordinate of next point - + X - + Y - + Z - + Y coordinate of next point - + Z coordinate of next point - + Enter point - + Enter a new point with the given coordinates - + Length @@ -5029,42 +5029,42 @@ Note: C++ exporter is faster, but is not as featureful yet - + Length of current segment - + Angle of current segment - + Radius - + Radius of Circle - + If checked, command will not finish until you press the command button again - + &OCC-style offset - + Sides - + Number of sides @@ -5074,77 +5074,77 @@ Note: C++ exporter is faster, but is not as featureful yet - + Auto - + Text string to draw - + String - + Height of text - + Height - + Intercharacter spacing - + Tracking - + Full path to font file: - + Open a FileChooser for font file - + Line - + DWire - + Circle - + Arc - + Point - + Label @@ -5154,87 +5154,87 @@ Note: C++ exporter is faster, but is not as featureful yet - + Pick Object - + Edit - + Global X - + Global Y - + Global Z - + Local X - + Local Y - + Local Z - + Invalid Size value. Using 200.0. - + Invalid Tracking value. Using 0. - + Please enter a text string. - + Select a Font file - + Please enter a font file. - + Faces - + Remove - + Add - + Facebinder elements @@ -5256,17 +5256,17 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Relative - + Continue - + Close @@ -5311,7 +5311,7 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Select edge @@ -5326,7 +5326,7 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Wipe @@ -5341,62 +5341,62 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Check this to lock the current angle - + Filled - + Finish - + Finishes the current drawing or editing operation - + &Undo (CTRL+Z) - + Undo the last segment - + Finishes and closes the current line - + Wipes the existing segments of this line and starts again from the last point - + Set WP - + Reorients the working plane on the last segment - + Selects an existing edge to be measured by this dimension - + If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands @@ -5406,12 +5406,12 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Modify subelements - + If checked, subelements will be modified instead of entire objects @@ -5446,27 +5446,27 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Create text - + Press this button to create the text object, or finish your text with two blank lines - + Offset distance - + Trim distance - + Change default style for new objects @@ -6754,7 +6754,7 @@ To enabled FreeCAD to download these libraries, answer Yes. - + Trimex @@ -7085,65 +7085,65 @@ The final angle will be the base angle plus this amount. - + Global - + Coordinates relative to last point or to coordinate system origin if is the first point to set - + Coordinates relative to global coordinate system. Uncheck to use working plane coordinate system - + Check this if the object should appear as filled, otherwise it will appear as wireframe. Not available if Draft preference option 'Use Part Primitives' is enabled - + If checked, an OCC-style offset will be performedinstead of the classic offset - + Local u0394X - + Local u0394Y - + Local u0394Z - + Global u0394X - + Global u0394Y - + Global u0394Z - + Autogroup: diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem.ts b/src/Mod/Fem/Gui/Resources/translations/Fem.ts index d9bd962418..a95ebb0ce3 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem.ts @@ -74,11 +74,6 @@ Geometry reference selector for a - - - Geometry reference selector for a - - Add @@ -124,6 +119,11 @@ Solid + + + Geometry reference selector for a + + SolidSelector diff --git a/src/Mod/Part/Gui/Resources/translations/Part.ts b/src/Mod/Part/Gui/Resources/translations/Part.ts index 0e5288138c..53eb1a0e5e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part.ts @@ -337,6 +337,16 @@ A 'Compound Filter' can be used to extract the individual slices.Slice apart + + + Boolean Fragments + + + + + Split objects where they intersect + + Slice a selected object by other objects, and split it apart. @@ -356,16 +366,6 @@ This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - - - Boolean Fragments - - - - - Split objects where they intersect - - Continue diff --git a/src/Mod/Path/Gui/Resources/translations/Path.ts b/src/Mod/Path/Gui/Resources/translations/Path.ts index 78e381270d..4886ec42e9 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path.ts @@ -8,36 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. - - - The direction along which dropcutter lines are created - - - - - Should the operation be limited by the stock object or by the bounding box of the base object - - - - - Step over percentage of the drop cutter path - - - - - Z-axis offset from the surface of the object - - - - - The Sample Interval. Small values cause long wait times - - - - - Enable optimization which removes unnecessary points from G-Code output - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. @@ -48,36 +18,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - The completion mode for the operation: single or multi-pass - - - - - The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - Stop index(angle) for rotational scan - - - Ignore areas that proceed below specified depth. - - - - - Depth used to identify waste areas to ignore. - - - - - Cut through waste to depth at model edge, releasing the model. - - Dropcutter lines are created parallel to this axis. @@ -243,11 +188,6 @@ The path to be copied - - - The base geometry of this toolpath - - The tool controller that will be used to calculate the path @@ -563,6 +503,11 @@ Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + + Start pocketing at center or boundary @@ -704,8 +649,63 @@ - - The library to use to generate the path + + The direction along which dropcutter lines are created + + + + + Should the operation be limited by the stock object or by the bounding box of the base object + + + + + Step over percentage of the drop cutter path + + + + + Z-axis offset from the surface of the object + + + + + The Sample Interval. Small values cause long wait times + + + + + Enable optimization which removes unnecessary points from G-Code output + + + + + The completion mode for the operation: single or multi-pass + + + + + The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) + + + + + Ignore areas that proceed below specified depth. + + + + + Depth used to identify waste areas to ignore. + + + + + Cut through waste to depth at model edge, releasing the model. + + + + + The base geometry of this toolpath @@ -987,13 +987,13 @@ - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + + Invalid Cutting Edge Angle %.2f, must be <90° and >=0° - - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° @@ -1157,6 +1157,31 @@ Increased to stock top. Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + + + + + Consider toggling the 'InverseAngle' property and recomputing. + + + + + Multiple faces in Base Geometry. + + + + + Depth settings will be applied to all faces. + + + + + EnableRotation property is 'Off'. + + Unable to create path for face(s). @@ -1222,31 +1247,6 @@ Increased to stock top. Utils - - - Face appears misaligned after initial rotation. - - - - - Consider toggling the 'InverseAngle' property and recomputing. - - - - - Multiple faces in Base Geometry. - - - - - Depth settings will be applied to all faces. - - - - - EnableRotation property is 'Off'. - - @@ -1969,6 +1969,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + + + + + Creates a Path Pocket object from a face or faces + + Normal @@ -2019,16 +2029,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. - - - Pocket Shape - - - - - Creates a Path Pocket object from a face or faces - - 3D Pocket @@ -3439,16 +3439,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - - - - - Creates a Path Dess-up object from a selected path - - Please select one path object @@ -3466,6 +3456,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object + + + Dress-up + + + + + Creates a Path Dess-up object from a selected path + + Path_DressupAxisMap @@ -3938,6 +3938,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object + + + The selected object is not a path + + + Please select one path object @@ -3953,12 +3959,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop - - - The selected object is not a path - - - Path_Inspect @@ -4205,11 +4205,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity - - - The Job has no selected Base object. - - Check the path job for common errors @@ -4460,6 +4455,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Date + + + The Job has no selected Base object. + + It appears the machine limits haven't been set. Not able to check path extents. @@ -4615,6 +4615,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + + Add Tool Controller to the Job @@ -4625,11 +4630,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller - - - Tool Number to Load - - Path_ToolTable @@ -4656,6 +4656,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4666,11 +4671,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - - Path_Waterline @@ -4705,11 +4705,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library + + + Tooltable JSON (*.json) + + + + + HeeksCAD tooltable (*.tooltable) + + + + + LinuxCNC tooltable (*.tbl) + + Open tooltable + + + Save tooltable + + + + + Rename Tooltable + + + + + Enter Name: + + + + + Add New Tool Table + + + + + Delete Selected Tool Table + + + + + Rename Selected Tool Table + + Tooltable editor @@ -4920,11 +4965,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - - Tooltable XML (*.xml) @@ -4940,46 +4980,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property - - - Rename Tooltable - - - - - Enter Name: - - - - - Add New Tool Table - - - - - Delete Selected Tool Table - - - - - Rename Selected Tool Table - - - - - Tooltable JSON (*.json) - - - - - HeeksCAD tooltable (*.tooltable) - - - - - LinuxCNC tooltable (*.tbl) - - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts index aefd12386b..63add151c4 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher.ts @@ -186,30 +186,35 @@ CmdSketcherCompConstrainRadDia - + Sketcher - + Constrain arc or circle - + Constrain an arc or a circle - + Constrain radius - + Constrain diameter + + + Constrain auto radius/diameter + + CmdSketcherCompCopy @@ -476,17 +481,17 @@ CmdSketcherConstrainAngle - + Sketcher - + Constrain angle - + Fix the angle of a line or the angle between two lines @@ -602,17 +607,17 @@ CmdSketcherConstrainEqual - + Sketcher - + Constrain equal - + Create an equality constraint between two lines or between circles and arcs @@ -638,17 +643,17 @@ CmdSketcherConstrainInternalAlignment - + Sketcher - + Constrain internal alignment - + Constrains an element to be aligned with the internal geometry of another element @@ -726,6 +731,24 @@ on the selected vertex + + CmdSketcherConstrainRadiam + + + Sketcher + + + + + Constrain auto radius/diameter + + + + + Fix automatically diameter on circle and radius on arc/pole + + + CmdSketcherConstrainRadius @@ -747,17 +770,17 @@ on the selected vertex CmdSketcherConstrainSnellsLaw - + Sketcher - + Constrain refraction (Snell's law') - + Create a refraction law (Snell's law) constraint between two endpoints of rays and an edge as an interface. @@ -766,17 +789,17 @@ and an edge as an interface. CmdSketcherConstrainSymmetric - + Sketcher - + Constrain symmetrical - + Create a symmetry constraint between two points with respect to a line or a third point @@ -1933,17 +1956,17 @@ This will clear the 'Support' property, if any. CmdSketcherToggleActiveConstraint - + Sketcher - + Activate/deactivate constraint - + Activates or deactivates the selected constraints @@ -1969,17 +1992,17 @@ This will clear the 'Support' property, if any. CmdSketcherToggleDrivingConstraint - + Sketcher - + Toggle driving/reference constraint - + Set the toolbar, or the selected constraints, into driving or reference mode @@ -2269,48 +2292,56 @@ invalid constraints, degenerated geometry, etc. - - - - - - + + + + + Add radiam constraint + + + + + + + + + Add angle constraint - - + + Add equality constraint - - - - - + + + + + Add symmetric constraint - + Add Snell's law constraint - - + + Add internal alignment constraint - + Toggle constraint to driving/reference - + Activate/Deactivate constraint @@ -2787,49 +2818,54 @@ invalid constraints, degenerated geometry, etc. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -3028,7 +3064,7 @@ invalid constraints, degenerated geometry, etc. - + Error @@ -3076,7 +3112,8 @@ invalid constraints, degenerated geometry, etc. - + + Select the right things from the sketch. @@ -3111,10 +3148,10 @@ invalid constraints, degenerated geometry, etc. - - - - + + + + Select an edge that is not a B-spline weight @@ -3164,7 +3201,7 @@ invalid constraints, degenerated geometry, etc. - + Select at least two lines from the sketch. @@ -3289,204 +3326,208 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c + + Select one or more arcs or circles from the sketch. + Select either only one or more B-Spline poles or only one or more arcs or circles from the sketch, but not mixed. + Constraint only applies to arcs or circles. - - + + Select one or two lines from the sketch. Or select two edges and a point. - - + + Parallel lines - - + + An angle constraint cannot be set for two parallel lines. - + Cannot add an angle constraint on an axis! - + Select two edges from the sketch. - - + + Select two or more compatible edges - + Sketch axes cannot be used in equality constraints - + Equality for B-spline edge currently unsupported. - - - + + + Select two or more edges of similar type - - - - - + + + + + Select two points and a symmetry line, two points and a symmetry point or a line and a symmetry point from the sketch. - - + + Cannot add a symmetry constraint between a line and its end points. - - + + Cannot add a symmetry constraint between a line and its end points! - + Select two endpoints of lines to act as rays, and an edge representing a boundary. The first selected point corresponds to index n1, second to n2, and datum value sets the ratio n2/n1. Constraint_SnellsLaw - + Cannot create constraint with external geometry only. - + Incompatible geometry is selected. - + SnellsLaw on B-spline edge is currently unsupported. - + You cannot internally constrain an ellipse on another ellipse. Select only one ellipse. - - + + Currently all internal geometrical elements of the ellipse are already exposed. - - - - - + + + + + Select constraints from the sketch. - + Selected objects are not just geometry from one sketch. - + Number of selected objects is not 3 (is %1). - - + + Select at least one ellipse and one edge from the sketch. - + Sketch axes cannot be used in internal alignment constraint - - + + Maximum 2 points are supported. - - + + Maximum 2 lines are supported. - - + + Nothing to constrain - - - - + + + + Extra elements - - - + + + More elements than possible for the given ellipse were provided. These were ignored. - + You cannot internally constrain an arc of ellipse on another arc of ellipse. Select only one arc of ellipse. - + You cannot internally constrain an ellipse on an arc of ellipse. Select only one ellipse or arc of ellipse. - + More elements than possible for the given arc of ellipse were provided. These were ignored. - + Currently internal geometry is only supported for ellipse or arc of ellipse. The last selected element must be an ellipse or an arc of ellipse. @@ -3802,12 +3843,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c - + Refractive index ratio - + Ratio n2/n1: @@ -3815,7 +3856,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c SketcherGui::ElementView - + Delete @@ -4819,106 +4860,106 @@ However, no constraints linking to the endpoints were found. - + Elements - + <html><head/><body><p>&quot;%1&quot;: multiple selection</p><p>&quot;%2&quot;: switch to next valid type</p></body></html> - - - - + + + + Point - - - + + + Line - - - - - - - - - + + + + + + + + + Construction - - - + + + Arc - - - + + + Circle - - - + + + Ellipse - - - + + + Elliptical Arc - - - + + + Hyperbolic Arc - - - + + + Parabolic Arc - - - + + + BSpline - - - + + + Other @@ -5326,21 +5367,37 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Sketcher_ConstrainDiameter - - + + Fix the diameter of a circle or an arc + + Sketcher_ConstrainRadiam + + + Fix the radius/diameter of a circle or an arc + + + Sketcher_ConstrainRadius - - + + Fix the radius of a circle or an arc + + Sketcher_ConstraintRadiam + + + Fix the radius/diameter of a circle or an arc + + + Sketcher_Copy diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts index b4a57855cf..bd77485c4b 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts @@ -901,7 +901,7 @@ - + Create CenterLine @@ -1816,12 +1816,12 @@ - + Create Center Line - + Edit Center Line