diff --git a/src/Gui/Language/FreeCAD_ca.qm b/src/Gui/Language/FreeCAD_ca.qm
index 56edce40fd..b702cc9c28 100644
Binary files a/src/Gui/Language/FreeCAD_ca.qm and b/src/Gui/Language/FreeCAD_ca.qm differ
diff --git a/src/Gui/Language/FreeCAD_ca.ts b/src/Gui/Language/FreeCAD_ca.ts
index cfd2bc556f..05b6591ba6 100644
--- a/src/Gui/Language/FreeCAD_ca.ts
+++ b/src/Gui/Language/FreeCAD_ca.ts
@@ -8063,7 +8063,7 @@ Voleu desar-lo amb un nom diferent?
&Open...
- &Obrir...
+ &Obre...
Open a document or import files
diff --git a/src/Gui/Language/FreeCAD_es-AR.qm b/src/Gui/Language/FreeCAD_es-AR.qm
index 961d0b5d47..4f3fff80a7 100644
Binary files a/src/Gui/Language/FreeCAD_es-AR.qm and b/src/Gui/Language/FreeCAD_es-AR.qm differ
diff --git a/src/Gui/Language/FreeCAD_es-AR.ts b/src/Gui/Language/FreeCAD_es-AR.ts
index 89d486fbb2..91da63e84f 100644
--- a/src/Gui/Language/FreeCAD_es-AR.ts
+++ b/src/Gui/Language/FreeCAD_es-AR.ts
@@ -211,7 +211,7 @@
Enable Translations
- Habilitar traducciones
+ Habilitar traslaciones
Enable Rotations
@@ -796,7 +796,7 @@ Si no está marcado, entonces la propiedad debe tener un nombre único y se acce
CheckBox
- CasillaSelección
+ Casilla de selección
@@ -1452,7 +1452,7 @@ Si no está marcado, entonces la propiedad debe tener un nombre único y se acce
Start up
- Comenzar
+ Inicio
Enable splash screen at start up
@@ -1460,7 +1460,7 @@ Si no está marcado, entonces la propiedad debe tener un nombre único y se acce
Auto load module after start up:
- Carga automática del módulo después de iniciar:
+ Módulo a cargar automáticamente después de iniciar:
Language
@@ -1533,23 +1533,22 @@ this according to your screen size or personal taste
'Both': keep all three panels, and you can have two sets of tree view and property view.
Personaliza cómo se muestra la vista de árbol en el panel (se requiere reiniciar).
-'Vista Combinada': combina la vista de árbol y la vista de propiedad en un panel.
-'Vista de Árbol y Vista de Propiedades': divide la vista de árbol y la vista de propiedades en un panel separado.
-'Ambos': mantiene los tres paneles, y puedes tener dos conjuntos de vista de árbol y vista de propiedad.
+'Vista combinada': combina la vista de árbol y la vista de propiedad en un panel.
+'Vista de árbol y vista de propiedades': divide la vista de árbol y la vista de propiedades en un panel separado.
+'Ambas': mantiene los tres paneles, y puedes tener dos conjuntos de vista de árbol y vista de propiedad.
A Splash screen is a small loading window that is shown
when FreeCAD is launching. If this option is checked, FreeCAD will
display the splash screen
- Una pantalla de Bienvenida es una pequeña ventana de carga que se muestra
+ Una pantalla de bienvenida es una pequeña ventana de carga que se muestra
cuando se inicia FreeCAD. Si esta opción está marcada, FreeCAD mostrará
la pantalla de bienvenida
Choose which workbench will be activated and shown
after FreeCAD launches
- Elija qué banco de trabajo se activará y se mostrará
-después de que FreeCAD inicie
+ Elige cuál entorno de trabajo se activará y mostrará al iniciar FreeCAD
Words will be wrapped when they exceed available
@@ -1586,15 +1585,15 @@ espacio horizontal disponible en la consola de Python
Combo View
- Vista Combinada
+ Vista combinada
TreeView and PropertyView
- Vista del Árbol y Vista de Propiedades
+ Vista de árbol y vista de propiedades
Both
- Ambos
+ Ambas
@@ -2258,11 +2257,11 @@ Especifique otro directorio, por favor.
Record warnings
- Guardar advertencias
+ Grabar advertencias
Record error messages
- Guardar mensajes de error
+ Grabar mensajes de error
Colors
@@ -2306,75 +2305,76 @@ Especifique otro directorio, por favor.
Warnings will be recorded
- Las advertencias se registrarán
+ Las advertencias se grabarán
Error messages will be recorded
- Los mensajes de registro serán grabados
+ Los mensajes de error serán grabados
When an error has occurred, the Report View dialog becomes visible
on-screen while displaying the error
- Cuando ha ocurrido un error, el diálogo de Vista de Informe se hace visible en pantalla mostrando el error
+ Cuando ha ocurrido un error, el diálogo de la Vista de Informe se hace visible en pantalla mostrando el error
Show report view on error
- Mostrar vista de informe en errores
+ Mostrar la vista de informes en caso de errores
When a warning has occurred, the Report View dialog becomes visible
on-screen while displaying the warning
- Cuando ha ocurrido una advertencia, el diálogo de Vista de Informe se hace visible en pantalla mostrando la advertencia
+ Cuando ha ocurrido una advertencia, el cuadro de diálogo de Informe se hace visible
+en pantalla mientras se muestra la advertencia
Show report view on warning
- Mostrar vista de informe en advertencias
+ Mostrar vista de informes en caso de advertencias
When a normal message has occurred, the Report View dialog becomes visible
on-screen while displaying the message
- Cuando se emite un mensaje normal, el diálogo de Vista de Informe se hace visible en pantalla mostrando el mensaje
+ Cuando ha ocurrido un mensaje normal, el cuadro de diálogo de Ver informes se hace visible
+en pantalla mientras se muestra el mensaje
Show report view on normal message
- Mostrar vista de informe en mensaje normal
+ Mostrar vista de informe en caso de mensaje normal
When a log message has occurred, the Report View dialog becomes visible
on-screen while displaying the log message
- Cuando se emite un mensaje de registro, el diálogo de Vista de Informe se hace visible en pantalla mostrando el mensaje de registro
+ Cuando se ha producido un mensaje de registro, el cuadro de diálogo de Ver informes se hace visible
+en pantalla mientras se muestra el mensaje de registro
Show report view on log message
- Mostrar vista de informe en mensaje de registro
+ Mostrar vista de informe en caso de mensaje de registro
Font color for normal messages in Report view panel
- Color de fuente para los mensajes normales en el panel de Vista de Informe
+ Color de fuente para los mensajes normales en el panel de vista del informe
Font color for log messages in Report view panel
- Color de fuente para los mensajes de registro en el panel de Vista de Informe
+ Color de fuente para los mensajes de registro en el panel de vista del informe
Font color for warning messages in Report view panel
- Color de fuente para mensajes de avertencia en el panel de Vista de Informe
+ Color de fuente para mensajes de advertencia en el panel de vista de informe
Font color for error messages in Report view panel
- Color de fuente para los mensajes de error en el panel de Vista de Informe
+ Color de fuente para mensajes de error en el panel de vista del informe
Internal Python output will be redirected
from Python console to Report view panel
- La salida interna de Python se redirigirá
-desde la consola de Python al panel de la vista de informe
+ La salida interna de Python se redirigirá desde la consola de Python al panel de vista de informe
Internal Python error messages will be redirected
from Python console to Report view panel
- La salida interna de Python se redirigirá
-desde la consola de Python al panel de la vista de informe
+ Los mensajes de errores internos de Python serán redireccionados desde la consola de Python al panel de vista de informes
Include a timecode for each report
@@ -2828,7 +2828,7 @@ del objeto 3D que se muestra actualmente.
Create new document at start up
- Crear un documento nuevo al iniciar
+ Crear nuevo documento al iniciar
Storage
@@ -2844,15 +2844,15 @@ del objeto 3D que se muestra actualmente.
Save thumbnail into project file when saving document
- Guardar la imagen en miniatura dentro del archivo de proyecto cuando se guarda un documento
+ Guardar miniatura en el archivo del proyecto al guardar el documento
Maximum number of backup files to keep when resaving document
- Número máximo de archivos de copia de seguridad a tener a la hora de volver a guardar el documento
+ Número máximo de archivos de copia de seguridad a tener al momento de volver a guardar el documento
Document objects
- Objetos de documento
+ Objetos del documento
Allow duplicate object labels in one document
@@ -2860,11 +2860,11 @@ del objeto 3D que se muestra actualmente.
Maximum Undo/Redo steps
- Máximos pasos de deshacer/rehacer
+ Máximo de pasos de deshacer/rehacer
Using Undo/Redo on documents
- Usando Deshacer/Rehacer en los documentos
+ Usar Deshacer/Rehacer en documentos
Authoring and License
@@ -2912,7 +2912,7 @@ del objeto 3D que se muestra actualmente.
Save AutoRecovery information every
- Guardar información de autorrecuperación cada
+ Guardar información de auto-recuperación cada
Add the program logo to the generated thumbnail
@@ -2928,11 +2928,11 @@ del objeto 3D que se muestra actualmente.
All changes in documents are stored so that they can be undone/redone
- Todos los cambios en los documentos se almacenan para que se puedan deshacer/rehacer
+ Todos los cambios en los documentos son almacenados para que se puedan deshacer/rehacer
How many Undo/Redo steps should be recorded
- Cuántos pasos de Deshacer/Rehacer deben ser grabados
+ Cuántos pasos de deshacer/rehacer deben ser grabados
Allow user aborting document recomputation by pressing ESC.
@@ -2947,16 +2947,15 @@ Esta operación puede aumentar ligeramente el tiempo de recálculo.
If there is a recovery file available the application will
automatically run a file recovery when it is started.
- Si hay un archivo de recuperación disponible, la aplicación
-ejecutará automáticamente un archivo de recuperación cuando se inicie.
+ Si hay un archivo de recuperación disponible, la aplicación automáticamente ejecutará un archivo de recuperación cuando se inicie.
How often a recovery file is written
- Con qué frecuencia se escribe un archivo de recuperación
+ Cada cuánto se escribe el archivo de recuperación
A thumbnail will be stored when document is saved
- Una miniatura se almacenará cuando se guarde el documento
+ Una miniatura será almacenada cuando se guarde el documento
Size
@@ -2965,16 +2964,16 @@ ejecutará automáticamente un archivo de recuperación cuando se inicie.
Sets the size of the thumbnail that is stored in the document.
Common sizes are 128, 256 and 512
- Establece el tamaño de la miniatura que se almacena en el documento.
+ Fija el tamaño de la miniatura que es almacenada en el documento.
Los tamaños comunes son 128, 256 y 512
The program logo will be added to the thumbnail
- El logotipo del programa se añadirá a la miniatura
+ El logo del programa se añadirá a la miniatura
How many backup files will be kept when saving document
- Cuántos archivos de copia de seguridad serán guardados al guardar el documento
+ Cuántos archivos de copia de seguridad se conservarán cuando se guarde el documento
Backup files will get extension '.FCbak' and file names
@@ -3019,15 +3018,15 @@ También puede utilizar el formulario: John Doe <john@doe.com>
The field 'Last modified by' will be set to specified author when saving the file
- El campo 'Última modificación por' se establecerá al autor especificado al guardar el archivo
+ El campo "Última modificación por" será asignado al autor especificado cuando se guarde el archivo
Default company name to use for new files
- Nombre de empresa predeterminado a usar para nuevos archivos
+ Nombre de organización predeterminado a usar en archivos nuevos
Default license for new documents
- Licencia predeterminada para nuevos documentos
+ Licencia predeterminada para documentos nuevos
Creative Commons Attribution
@@ -3344,15 +3343,15 @@ También puede utilizar el formulario: John Doe <john@doe.com>
Macro recording settings
- Configuración de la grabación de macros
+ Configuración de grabación de macros
Logging Commands
- Comandos de registro
+ Registro de comandos
Show script commands in python console
- Mostrar comandos de archivos de guión en la consola de Python
+ Mostrar comandos de scripts en la consola de Python
Log all commands issued by menus to file:
@@ -3364,7 +3363,7 @@ También puede utilizar el formulario: John Doe <john@doe.com>
Gui commands
- Comandos de interfaz de usuario
+ Comandos de la interfaz gráfica de usuario
Record as comment
@@ -3380,19 +3379,19 @@ También puede utilizar el formulario: John Doe <john@doe.com>
Run macros in local environment
- Ejecutar macro en entorno local
+ Ejecutar macros en entorno local
Record GUI commands
- Grabar comandos GUI
+ Grabar los comandos GUI
Variables defined by macros are created as local variables
- Las variables definidas por macros se crean como variables locales
+ Las variables definidas por macros son creadas como variables locales
Commands executed by macro scripts are shown in Python console
- Los comandos ejecutados por scripts de macro se muestran en la consola de Python
+ Los comandos ejecutados por scripts de macros se muestran en la consola de Python
Recorded macros will also contain user interface commands
@@ -3412,19 +3411,19 @@ También puede utilizar el formulario: John Doe <john@doe.com>
Size of recent macro list
- Tamaño de la lista de macros reciente
+ Tamaño de la lista de macros recientes
How many macros should be listed in recent macros list
- Cuántas macros debería aparecer en la lista de macros recientes
+ Cuántas macros deben aparecer en la lista de macros recientes
Shortcut count
- Contador de accesos directos
+ Contador de atajos
How many recent macros should have shortcuts
- Cuántas macros recientes deben tener accesos directos
+ Cuántas macros recientes deben tener atajos
Keyboard Modifiers
@@ -3670,7 +3669,7 @@ El paso de zoom de '1' significa un factor de 7.5 para cada paso de acercamiento
Auto expand tree item when the corresponding object is selected in 3D view
- Auto expande el elemento del árbol cuando se selecciona el objeto correspondiente en la vista 3D
+ Autoexpande el elemento del árbol cuando se selecciona el objeto correspondiente en la vista 3D
Preselect the object in 3D view when mouse over the tree item
@@ -3682,7 +3681,7 @@ El paso de zoom de '1' significa un factor de 7.5 para cada paso de acercamiento
Add checkboxes for selection in document tree
- Añadir casillas de selección en el árbol del documentos
+ Añadir casillas de selección en el árbol de documentos
@@ -3733,7 +3732,7 @@ El paso de zoom de '1' significa un factor de 7.5 para cada paso de acercamiento
Minimum fractional inch:
- Mínimo pulgadas fraccionarias:
+ Fracción de pulgada mínima:
1/2"
@@ -3769,7 +3768,7 @@ El paso de zoom de '1' significa un factor de 7.5 para cada paso de acercamiento
Number of decimals that should be shown for numbers and dimensions
- Número de decimales que deberían mostrarse en números y cotas
+ Número de decimales que deben mostrarse para números y cotas
Unit system that should be used for all parts the application
@@ -3777,7 +3776,7 @@ El paso de zoom de '1' significa un factor de 7.5 para cada paso de acercamiento
Minimum fractional inch to be displayed
- Pulgada fraccional mínima que se mostrará
+ Fracción de pulgada mínima que se mostrará
Building US (ft-in/sqft/cft)
@@ -4417,7 +4416,7 @@ La columna 'Estado' muestra si el documento puede ser recuperado.
Translation:
- Traducción:
+ Traslación:
Z:
@@ -4717,7 +4716,7 @@ originally selected prior to opening this dialog
Gui::DockWnd::ComboView
Combo View
- Vista Combinada
+ Vista combinada
Model
@@ -5949,7 +5948,7 @@ Do you want to specify another directory?
Afrikaans
- Africano
+ Afrikáans
Norwegian
@@ -6398,7 +6397,7 @@ Do you want to specify another directory?
Combo View
- Vista Combinada
+ Vista combinada
Toolbox
@@ -6791,7 +6790,7 @@ Be aware the point where you click matters.
Translation:
- Traducción:
+ Traslación:
Rotation:
@@ -9488,7 +9487,7 @@ Would you like to save the file with a different name?
Auto expand tree item when the corresponding object is selected in 3D view
- Auto expande el elemento del árbol cuando se selecciona el objeto correspondiente en la vista 3D
+ Autoexpande el elemento del árbol cuando se selecciona el objeto correspondiente en la vista 3D
diff --git a/src/Gui/Language/FreeCAD_es-ES.qm b/src/Gui/Language/FreeCAD_es-ES.qm
index 8f38eec800..9bb418e375 100644
Binary files a/src/Gui/Language/FreeCAD_es-ES.qm and b/src/Gui/Language/FreeCAD_es-ES.qm differ
diff --git a/src/Gui/Language/FreeCAD_es-ES.ts b/src/Gui/Language/FreeCAD_es-ES.ts
index 826b60f120..f0bc278907 100644
--- a/src/Gui/Language/FreeCAD_es-ES.ts
+++ b/src/Gui/Language/FreeCAD_es-ES.ts
@@ -2375,8 +2375,7 @@ desde la consola de Python al panel de la vista de informe
Internal Python error messages will be redirected
from Python console to Report view panel
- La salida interna de Python se redirigirá
-desde la consola de Python al panel de la vista de informe
+ Los mensajes de errores internos de Python serán redireccionados desde la consola de Python al panel de vista de informes
Include a timecode for each report
diff --git a/src/Gui/Language/FreeCAD_ka.qm b/src/Gui/Language/FreeCAD_ka.qm
index 8b7aacd5cd..f45a687f25 100644
Binary files a/src/Gui/Language/FreeCAD_ka.qm and b/src/Gui/Language/FreeCAD_ka.qm differ
diff --git a/src/Gui/Language/FreeCAD_ka.ts b/src/Gui/Language/FreeCAD_ka.ts
index 3f352aca30..ad7f41dcea 100644
--- a/src/Gui/Language/FreeCAD_ka.ts
+++ b/src/Gui/Language/FreeCAD_ka.ts
@@ -211,7 +211,7 @@
Enable Translations
- მობრუნების ჩართვა
+ მოძრაობითი გადატანის ჩართვა
Enable Rotations
@@ -389,7 +389,7 @@
Scroll middle mouse button
- Scroll middle mouse button
+ დაატრიალეთ თაგუნის ბორბალი
@@ -404,7 +404,7 @@
Press middle+left or middle+right button
- Press middle+left or middle+right button
+ დააჭირეთ შუა+მარცხენა ან შუა+მარჯვენა ღილაკებს
Scroll middle mouse button or keep middle button depressed
@@ -525,7 +525,7 @@ while doing a left or right click and move the mouse up or down
FreeCAD would not be possible without the contributions of
- FreeCAD would not be possible without the contributions of
+ FreeCAD-ის შექმნა შეუძლებელი იქნება ამ ადამიანების წვლილის გარეშე
Individuals
@@ -1034,11 +1034,11 @@ If this is not ticked, then the property must be uniquely named, and it is acces
The shortcut '%1' is already assigned to '%2'.
- The shortcut '%1' is already assigned to '%2'.
+ მალსახმობი '%1' უკვე მინიჭებულია '%2'-ზე.
Do you want to override it?
- Do you want to override it?
+ გნებავთ გადააწეროთ?
@@ -1406,7 +1406,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces
Pressing <Tab> will insert amount of defined indent size
- Pressing <Tab> will insert amount of defined indent size
+ <Tab>-ის დაჭერით შეიტანილი შეწევის ზომა
Tabulator raster (how many spaces)
@@ -1414,7 +1414,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces
How many spaces will be inserted when pressing <Tab>
- How many spaces will be inserted when pressing <Tab>
+ <Tab>-ის დაჭერისას ჩასმული ჰარეების რაოდენობა
Pressing <Tab> will insert a tabulator with defined tab size
@@ -1426,15 +1426,15 @@ If this is not ticked, then the property must be uniquely named, and it is acces
Font size to be used for selected code type
- Font size to be used for selected code type
+ მონიშნული ტიპის კოდის ტექსტის ფონტის ზომა
Color and font settings will be applied to selected type
- Color and font settings will be applied to selected type
+ მონიშნულ ტიპზე გადასატარებელი ფერისა და ფონტის პარამეტრები
Font family to be used for selected code type
- Font family to be used for selected code type
+ მონიშნული ტიპის კოდის ტექსტის ფონტის ოჯახი
Color:
@@ -1442,7 +1442,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces
Code lines will be numbered
- Code lines will be numbered
+ კოდის ხაზები დაინომრება
@@ -1505,7 +1505,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces
How many files should be listed in recent files list
- How many files should be listed in recent files list
+ რამდენი ფაილი უნდა იყოს „უკანასკნელი ფაილები“-ის სიაში
Background of the main window will consist of tiles of a special image.
@@ -1848,11 +1848,11 @@ Note: your changes will be applied when you next switch workbenches
The macro '%1' already exists. Do you want to overwrite?
- The macro '%1' already exists. Do you want to overwrite?
+ მაკრო '%1' უკვე არსებობს. გსურთ გადააწეროთ?
The macro directory doesn't exist. Please, choose another one.
- The macro directory doesn't exist. Please, choose another one.
+ მაკროს საქაღალდე არ არსებობს. გთხოვთ, სხვა აირჩიოთ.
Choose macro directory
@@ -1927,9 +1927,9 @@ Note: your changes will be applied when you next switch workbenches
Access denied to '%1'
Specify another directory, please.
- Access denied to '%1'
+ '%1'-ზე წვდომა აკრძალულია
-Specify another directory, please.
+გთხოვთ მიუთითოთ სხვა საქაღალდე.
HTML files
@@ -1968,7 +1968,7 @@ Specify another directory, please.
Type in a group name to find it
- Type in a group name to find it
+ ჩაწერეთ მოსაძებნი ჯგუფის სახელი
Search Group
@@ -2003,7 +2003,7 @@ Specify another directory, please.
Match whole string only
- Match whole string only
+ მხოლოდ მთელი სტრიქონის დამთხვევის შემთხვევაში
Find Next
@@ -2202,7 +2202,7 @@ Specify another directory, please.
No destination is defined.
- No destination is defined.
+ მიმართულება აღწერილი არაა.
Project file
@@ -2292,11 +2292,11 @@ Specify another directory, please.
Redirect internal Python errors to report view
- Redirect internal Python errors to report view
+ Python-ის შიდა შეცდომების ანგარიშის ხედში ჩვენება
Redirect internal Python output to report view
- Redirect internal Python output to report view
+ Python-ის შიდა გამომავლების ანგარიშის ხედში ჩვენება
Python interpreter
@@ -2304,7 +2304,7 @@ Specify another directory, please.
Log messages will be recorded
- Log messages will be recorded
+ შეტყობიბენენის ჩაიწერება ჟურნალში
Warnings will be recorded
@@ -2322,7 +2322,7 @@ on-screen while displaying the error
Show report view on error
- Show report view on error
+ შეცდომის ანგარიშის ხედის ჩვენება
When a warning has occurred, the Report View dialog becomes visible
@@ -2332,7 +2332,7 @@ on-screen while displaying the warning
Show report view on warning
- Show report view on warning
+ გაფრთხილების ანგარიშის ხედის ჩვენება
When a normal message has occurred, the Report View dialog becomes visible
@@ -2356,19 +2356,19 @@ on-screen while displaying the log message
Font color for normal messages in Report view panel
- Font color for normal messages in Report view panel
+ ანგარიშის ნახვის პანელის ნორმალური ელემენტების ფონტის ფერი
Font color for log messages in Report view panel
- Font color for log messages in Report view panel
+ ანგარიშის ნახვის პანელის ჟურნალის ელემენტების ფონტის ფერი
Font color for warning messages in Report view panel
- Font color for warning messages in Report view panel
+ ანგარიშის ნახვის პანელის გაფრთხილების ელემენტების ფონტის ფერი
Font color for error messages in Report view panel
- Font color for error messages in Report view panel
+ ანგარიშის ნახვის პანელის შეცდომის ელემენტების ფონტის ფერი
Internal Python output will be redirected
@@ -2384,15 +2384,15 @@ from Python console to Report view panel
Include a timecode for each report
- Include a timecode for each report
+ ჟურნალში ანგარიშებისთვის დროის მიწერა
Include a timecode for each entry
- Include a timecode for each entry
+ ჟურნალში ელემენტებისთვის დროის მიწერა
Normal messages will be recorded
- Normal messages will be recorded
+ ნორმალური შეტყობინებები ასევე ჩაიწერება ჟურნალში
Record normal messages
@@ -2588,7 +2588,7 @@ but slower response to any scene changes.
Render types of transparent objects
- Render types of transparent objects
+ გამჭვირვალე ობიექტების რენდერის ტიპები
One pass
@@ -2620,11 +2620,11 @@ but slower response to any scene changes.
Intensity of the backlight
- Intensity of the backlight
+ გამოკვეთის ინტენსიურობა
Objects will be projected in orthographic projection
- Objects will be projected in orthographic projection
+ ობიექტები ნაჩვენები იქნება ორთოგრაფიულ პროექციაში
Objects will appear in a perspective projection
@@ -2638,7 +2638,7 @@ opening or creation
Show axis cross by default
- Show axis cross by default
+ ღერძების კვეთის ყოველთვის ჩვენება
Pick radius (px):
@@ -2666,7 +2666,7 @@ Changing this option requires a restart of the application.
What kind of multisample anti-aliasing is used
- What kind of multisample anti-aliasing is used
+ მომრგვალების გამოყენებული ტიპი
Eye-to-eye distance used for stereo projections.
@@ -2815,7 +2815,7 @@ bounding box size of the 3D object that is currently displayed.
The maximum value must be higher than the minimum value.
- The maximum value must be higher than the minimum value.
+ მაქსიმალური მნიშვნელობა მინიმალურზე დიდი უნდა იყოს.
@@ -2852,11 +2852,11 @@ bounding box size of the 3D object that is currently displayed.
Save thumbnail into project file when saving document
- Save thumbnail into project file when saving document
+ დოკუმენტის შენახვისას პროექტის ფაილში მინიატურის ჩამატება
Maximum number of backup files to keep when resaving document
- Maximum number of backup files to keep when resaving document
+ დოკუმენტის ხელახალი შენახვისას სარეზერვო ფაილების მაქსიმალური რაოდენობა
Document objects
@@ -2872,7 +2872,7 @@ bounding box size of the 3D object that is currently displayed.
Using Undo/Redo on documents
- Using Undo/Redo on documents
+ დაბრუნება/გამეორების დოკუმენტებზე გამოყენება
Authoring and License
@@ -2916,7 +2916,7 @@ bounding box size of the 3D object that is currently displayed.
Run AutoRecovery at startup
- Run AutoRecovery at startup
+ გაშვებისას ფაილების ავტომატური აღდგენა
Save AutoRecovery information every
@@ -2924,15 +2924,15 @@ bounding box size of the 3D object that is currently displayed.
Add the program logo to the generated thumbnail
- Add the program logo to the generated thumbnail
+ გენერირებულ მინიატურაში პროგრამის ლოგოს ჩამატება
The application will create a new document when started
- The application will create a new document when started
+ დაწყებისას აპლიკაცია შექმნის ახალ დოკუმენტს
Compression level for FCStd files
- Compression level for FCStd files
+ FCStd ფაილებს შეკუმშვის დონე
All changes in documents are stored so that they can be undone/redone
@@ -2960,11 +2960,11 @@ automatically run a file recovery when it is started.
How often a recovery file is written
- How often a recovery file is written
+ რამდენად ხშირად ჩაიწერება აღდგენის ფაილი
A thumbnail will be stored when document is saved
- A thumbnail will be stored when document is saved
+ მინიატურა შეინახება დოკუმენტის შენახვისას
Size
@@ -2978,11 +2978,11 @@ Common sizes are 128, 256 and 512
The program logo will be added to the thumbnail
- The program logo will be added to the thumbnail
+ მინიატურას დაემატება პროგრამის ლოგო
How many backup files will be kept when saving document
- How many backup files will be kept when saving document
+ რამდენი სარეზერვო ფაილი შეინახება დოკუმენტის შენახვისას
Backup files will get extension '.FCbak' and file names
@@ -3000,7 +3000,7 @@ get date suffix according to the specified format
Allow objects to have same label/name
- Allow objects to have same label/name
+ ნების დართვა, ობიექტებს იგივე ჭდე/სახელი ჰქონდეთ
Enable partial loading of external linked documents.
@@ -3032,7 +3032,7 @@ You can also use the form: John Doe <john@doe.com>
Default company name to use for new files
- Default company name to use for new files
+ კომპანიის სახელის ნაგულისხმევი მნიშვნელობა ახალი ფაილებისთვის
Default license for new documents
@@ -3064,7 +3064,7 @@ You can also use the form: John Doe <john@doe.com>
URL describing more about the license
- URL describing more about the license
+ ბმული, სადაც ლიცენზიების შესახებ უფო მეტი რამ წერია
@@ -3307,7 +3307,7 @@ You can also use the form: John Doe <john@doe.com>
<html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html>
- <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html>
+ <html><head/><body><p>რესურსების შესანარჩუნებლად, FreeCAD არ ტვირთავს დაზგებს, სანამ ისინი არ გამოიყენება. მათი ჩატვირთვამ შეიძლება უზრუნველყოს წვდომა დამატებით პარამეტრებზე, რომლებიც დაკავშირებულია მათ ფუნქციონირებასთან.</p><p>თქვენს ინსტალაციაში ხელმისაწვდომია შემდეგი დაზგები:</p></body></html>
Available Workbenches
@@ -3330,7 +3330,7 @@ You can also use the form: John Doe <john@doe.com>
will be loaded automatically when FreeCAD starts up
- will be loaded automatically when FreeCAD starts up
+ ჩაიტვირთება ავტომატურად FreeCAD-ის გაშვებისას
This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change.
@@ -3361,7 +3361,7 @@ You can also use the form: John Doe <john@doe.com>
Show script commands in python console
- Show script commands in python console
+ სკრიპტის ბრძანებების Python-ის კონსოლში ჩვენება
Log all commands issued by menus to file:
@@ -3397,11 +3397,11 @@ You can also use the form: John Doe <john@doe.com>
Variables defined by macros are created as local variables
- Variables defined by macros are created as local variables
+ მაკროებით განსაზღვრული ცვლადები იქმნება როგორც ლოკალური ცვლადები
Commands executed by macro scripts are shown in Python console
- Commands executed by macro scripts are shown in Python console
+ მაკროს სკრიპტების მიერ გაშვებული ბრძანებების თანამიმდევრობა ნაჩვენებია Python-ის კონსოლში
Recorded macros will also contain user interface commands
@@ -3413,7 +3413,7 @@ You can also use the form: John Doe <john@doe.com>
The directory in which the application will search for macros
- The directory in which the application will search for macros
+ საქაღალდე, რომელშიც აპლიკაცია მოძებნის მაკროებს
Recent macros menu
@@ -3421,11 +3421,11 @@ You can also use the form: John Doe <john@doe.com>
Size of recent macro list
- Size of recent macro list
+ ბოლოს გახსნილი მაკროების სიის ზომა
How many macros should be listed in recent macros list
- How many macros should be listed in recent macros list
+ რამდენი მაკრო უნდა იყოს ჩამოთვლილი ბოლო მაკროების სიაში
Shortcut count
@@ -3468,7 +3468,7 @@ You can also use the form: John Doe <john@doe.com>
Corner where navigation cube is shown
- Corner where navigation cube is shown
+ ეკრანის კუთხე, რომელშიც ნავიგაციის კუბ გამოჩნდება
Top left
@@ -3502,7 +3502,7 @@ Select a set and then press the button to view said configurations.
Navigation settings set
- Navigation settings set
+ ნავიგაციის პარამეტრების ნაკრები
Orbit style
@@ -3648,7 +3648,7 @@ Mouse tilting is not disabled by this setting.
Rotates to nearest possible state when clicking a cube face
- Rotates to nearest possible state when clicking a cube face
+ კუბის ზედაპირზე დაწკაპუნებისას უახლოეს შესაძლო მდგომარეობამდე მობრუნება
Rotate to nearest
@@ -3784,19 +3784,19 @@ Zoom step of '1' means a factor of 7.5 for every zoom step.
Unit system that should be used for all parts the application
- Unit system that should be used for all parts the application
+ საზომი ერთეულები, რომელიც უნდა იყოს გამოყენებული აპლიკაციის ყველა ნაწილისთვის
Minimum fractional inch to be displayed
- Minimum fractional inch to be displayed
+ დუიმის მინიმალური ჩვენებად ნაწილი
Building US (ft-in/sqft/cft)
- Building US (ft-in/sqft/cft)
+ მშენებლობა ა. შ. შ.-ში(ფუტი-დუიმი/კვ. ფტ/კუბ. ფტ.)
Imperial for Civil Eng (ft, ft/sec)
- Imperial for Civil Eng (ft, ft/sec)
+ იმპერიული საზომი ერთეულები სამოქალაქო ინჟინერიისთვის(ფუტები, ფუტები/წმ)
FEM (mm, N, sec)
@@ -3815,11 +3815,11 @@ Zoom step of '1' means a factor of 7.5 for every zoom step.
Enable selection highlighting
- Enable selection highlighting
+ მონიშნულის გამოკვეთის ჩართვა
Enable preselection highlighting
- Enable preselection highlighting
+ გამოკვეთა თაგუნის გადატარებით
Background color
@@ -3847,23 +3847,23 @@ Zoom step of '1' means a factor of 7.5 for every zoom step.
Enable preselection and highlight by specified color
- Enable preselection and highlight by specified color
+ წინასწარი მონიშვნისა და ფერის მიხედვით გამოკვეთის ჩართვა
Enable selection highlighting and use specified color
- Enable selection highlighting and use specified color
+ მონიშვნისა და განსაზღვრული ფერით გამოკვეთის ჩართვა
Background color for the model view
- Background color for the model view
+ მოდელის ხედის ფონის ფერი
Background will have selected color
- Background will have selected color
+ ფონს მონიშნული ფერ ექნება
Color gradient will get selected color as middle color
- Color gradient will get selected color as middle color
+ ფერის გრადიენტი მიიღებს შერჩეულ ფერს, როგორც შუა ფერს
Bottom color
@@ -3925,11 +3925,11 @@ Zoom step of '1' means a factor of 7.5 for every zoom step.
Input the source value and unit
- Input the source value and unit
+ შეიყვანეთ წყაროს მნიშვნელობა საზომი ერთეული
Input here the unit for the result
- Input here the unit for the result
+ შედეგის საზომი ერთეული
Result
@@ -3961,7 +3961,7 @@ The preference system is the one set in the general preferences.
Decimals for the Quantity
- Decimals for the Quantity
+ რაოდენობის განმსაზღვრელი რიცხვის მეათედების სიზუსტე
Unit category:
@@ -3969,11 +3969,11 @@ The preference system is the one set in the general preferences.
Unit category for the Quantity
- Unit category for the Quantity
+ რაოდენობის საზომი ერთეული
Copy the result into the clipboard
- Copy the result into the clipboard
+ შედეგის მიმოცვლის ბაფერში კოპირება
@@ -4121,7 +4121,7 @@ The preference system is the one set in the general preferences.
Are you sure you want to delete all transient directories?
- Are you sure you want to delete all transient directories?
+ დარწმუნებული ხართ, რომ გსურთ წაშალოთ ყველა დროებითი საქაღალდე?
Finished
@@ -4366,7 +4366,7 @@ The 'Status' column shows whether the document could be recovered.
Do you really want to remove this parameter group?
- Do you really want to remove this parameter group?
+ დარწმუნებული ხართ რომ გნებავთ ამ პარამეტრების ამ ჯგუფის წაშლა?
@@ -4428,7 +4428,7 @@ The 'Status' column shows whether the document could be recovered.
Translation:
- მობრუნება:
+ მოძრაობითი გადატანა:
Z:
@@ -4496,7 +4496,7 @@ The 'Status' column shows whether the document could be recovered.
Shift click for opposite direction
- Shift click for opposite direction
+ მიმართულების შესაცვლელად გამოიყენეთ Shift+წკაპი
Selected points
@@ -4554,7 +4554,7 @@ The 'Status' column shows whether the document could be recovered.
Gui::Dialog::RemoteDebugger
Attach to remote debugger
- Attach to remote debugger
+ დისტანციურ დებაგერზე მიმაგრება
winpdb
@@ -4861,7 +4861,7 @@ originally selected prior to opening this dialog
Selects and locates this object in the tree view
- Selects and locates this object in the tree view
+ ამ ობიექტის ხის ხედში პოვნა და მონშვნა
To python console
@@ -4869,7 +4869,7 @@ originally selected prior to opening this dialog
Reveals this object and its subelements in the python console.
- Reveals this object and its subelements in the python console.
+ ამ ობიექტის და მისი ქვეელემენტების Python-ის კონსოლში ჩვენება.
Mark to recompute
@@ -4893,7 +4893,7 @@ originally selected prior to opening this dialog
Creates a standalone copy of this subshape in the document
- Creates a standalone copy of this subshape in the document
+ დოკუმენტში ამ ქვეფორმის ცალკეულ ასლის შექმნა
Picked object list
@@ -4915,7 +4915,7 @@ originally selected prior to opening this dialog
Gui::EditorView
Modified file
- მოდიფიცირებული ფაილი
+ შეცვლილი ფაილი
%1.
@@ -5046,7 +5046,7 @@ Do you want to save your changes?
Drag screen with two fingers OR press right mouse button.
- Drag screen with two fingers OR press right mouse button.
+ გადაათრიეთ ეკრანი ორი თითით ან დააჭირეთ მაუსის მარჯვენა ღილაკს.
Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition.
@@ -5093,7 +5093,7 @@ Do you want to save your changes?
Graphviz couldn't be found on your system.
- Graphviz couldn't be found on your system.
+ თქვენს სისტემაში Graphviz აღმოჩენილი არაა.
Read more about it here.
@@ -5101,11 +5101,11 @@ Do you want to save your changes?
Do you want to specify its installation path if it's already installed?
- Do you want to specify its installation path if it's already installed?
+ გნებავთ მისამართის მითითება, თუ ის უკვე დაყენებულია?
Graphviz installation path
- Graphviz installation path
+ მისამართი Graphviz-ის გამშვებ ფაილებამდე
Graphviz failed
@@ -5113,7 +5113,7 @@ Do you want to save your changes?
Graphviz failed to create an image file
- Graphviz failed to create an image file
+ Graphviz-მა ვერ შეძლო გამოსახულების შექმნა
@@ -5143,7 +5143,7 @@ Do you want to save your changes?
Scroll middle mouse button
- Scroll middle mouse button
+ დაატრიალეთ თაგუნის ბორბალი
@@ -5161,7 +5161,7 @@ Do you want to save your changes?
Direction must not be the null vector
- Direction must not be the null vector
+ მიმართულება ვერ იქნება ნულოვანი ვექტორი
X
@@ -5230,7 +5230,7 @@ Do you want to save your changes?
Toggles this dockable window
- Toggles this dockable window
+ მიმაგრებადი ფანჯრის ჩვენების ჩართ/გამორთ
Close All
@@ -5259,7 +5259,7 @@ Do you want to save the document now?
The alignment is already in progress.
- The alignment is already in progress.
+ სწორება უკვე მიმდინარეობს.
Alignment[*]
@@ -5279,7 +5279,7 @@ Do you want to save the document now?
The alignment has finished
- The alignment has finished
+ სწორება დასრულებულია
The alignment has been canceled
@@ -5329,7 +5329,7 @@ How do you want to proceed?
Point picked at (%1,%2,%3)
- Point picked at (%1,%2,%3)
+ არჩეული წერტილი (%1,%2,%3)
No point was picked
@@ -5519,7 +5519,7 @@ Do you want to exit without saving your data?
Unhandled PyCXX exception.
- Unhandled PyCXX exception.
+ PyCXX-ის დაუმუშავებელი შეცდომა.
Unhandled FreeCAD exception.
@@ -5591,7 +5591,7 @@ Do you want to exit without saving your data?
Saves Python history across %1 sessions
- Saves Python history across %1 sessions
+ Python-ის ისტორიის შენახვა %1 სესიის განმავლობაში
@@ -5651,7 +5651,7 @@ Do you want to exit without saving your data?
Scroll middle mouse button
- Scroll middle mouse button
+ დაატრიალეთ თაგუნის ბორბალი
@@ -5735,11 +5735,11 @@ Do you want to specify another directory?
Automatic python modules documentation
- Automatic python modules documentation
+ Python-ის მოდულების ავტომატურად გენერირებული დოკუმენტაცია
Opens a browser to show the Python modules documentation
- Opens a browser to show the Python modules documentation
+ ბრაუზერის გახსნა Python-ის მოდულების დოკუმენტაციის საჩვენებლად
@@ -5764,7 +5764,7 @@ Do you want to specify another directory?
Translation Increment:
- შემობრუნების ზრდადობა:
+ მოძრაობითი გადატანის ბიჯი:
Rotation Increment:
@@ -5886,7 +5886,7 @@ Do you want to specify another directory?
Do you want to save your changes before closing?
- Do you want to save your changes before closing?
+ გსურთ შეინახოთ თქვენი ცვლილებები გამოსვლამდე?
If you don't save, your changes will be lost.
@@ -6173,7 +6173,7 @@ Do you want to specify another directory?
Show hidden tree view items
- Show hidden tree view items
+ ხის დამალული ელემენტების ჩვენება
Hide item
@@ -6213,7 +6213,7 @@ Do you want to specify another directory?
Recompute the selected object
- Recompute the selected object
+ მონიშნული ობიექტის თავიდან გამოთვლა
(but must be executed)
@@ -6296,11 +6296,11 @@ Do you want to specify another directory?
NetworkAccessManager
<qt>Enter username and password for "%1" at %2</qt>
- <qt>Enter username and password for "%1" at %2</qt>
+ <qt>შეიყვანეთ მომხმარებლის სახელი და პაროლი %1-თვის %2-დან</qt>
<qt>Connect to proxy "%1" using:</qt>
- <qt>Connect to proxy "%1" using:</qt>
+ <qt>%1 პროქსისთან მიერთების საშუალება:</qt>
@@ -6390,7 +6390,7 @@ Do you want to specify another directory?
Input in line %1 is not a number
- Input in line %1 is not a number
+ ხაზზე %1 შეყვანილი სტრიქონი რიცხვს არ წარმოადგენს
@@ -6658,7 +6658,7 @@ Please open a browser window and type in: http://localhost:%1.
Unable to open your system browser.
- Unable to open your system browser.
+ სისტემური ბრაუზერის გაშვების შეცდომა.
Options...
@@ -6670,7 +6670,7 @@ Please open a browser window and type in: http://localhost:%1.
Not enough memory available to display the data.
- Not enough memory available to display the data.
+ არ არის საკმარისი მეხსიერება მონაცემთა საჩვენებლად.
Cannot find file %1
@@ -6678,7 +6678,7 @@ Please open a browser window and type in: http://localhost:%1.
Cannot find file %1 neither in %2 nor in %3
- Cannot find file %1 neither in %2 nor in %3
+ ვერ ვიპოვე ფაილი %1, ვერც %2 და ვერც %3
Save %1 Document
@@ -6694,7 +6694,7 @@ Please open a browser window and type in: http://localhost:%1.
The document is not closable for the moment.
- The document is not closable for the moment.
+ დოკუმენტი ამ მომენტისთვის დახურვადი არაა.
No OpenGL
@@ -6702,7 +6702,7 @@ Please open a browser window and type in: http://localhost:%1.
This system does not support OpenGL
- This system does not support OpenGL
+ ამ სისტემას არ აქვს OpenGL-ის მხარდაჭერა
Help
@@ -6764,7 +6764,7 @@ Be aware the point where you click matters.
Save a copy of the document under new filename...
- Save a copy of the document under new filename...
+ დოკუმენტის ასლის ახალი სახელით შენახვა...
Frozen views
@@ -6784,7 +6784,7 @@ Be aware the point where you click matters.
Not allowed to delete system-wide macros
- Not allowed to delete system-wide macros
+ სისტემური მაკროების წაშლა აკრძალულია
Origin
@@ -6796,7 +6796,7 @@ Be aware the point where you click matters.
The %1 is not empty, delete its content as well?
- The %1 is not empty, delete its content as well?
+ %1 ცარიელი არაა. წავშალო მისი შემცველობაც?
Export failed
@@ -6808,7 +6808,7 @@ Be aware the point where you click matters.
Translation:
- მობრუნება:
+ მოძრაობითი გადატანა:
Rotation:
@@ -6886,7 +6886,7 @@ Please check the Report View for more details.
Failed to create relative link
- Failed to create relative link
+ შედარებითი ბმულის შექმნის შეცდომა
Unlink failed
@@ -6916,7 +6916,7 @@ underscore, and must not start with a digit.
The property '%1' already exists in '%2'
- The property '%1' already exists in '%2'
+ %2-ს უკვე აქვს თვისება %1
Add property
@@ -6924,7 +6924,7 @@ underscore, and must not start with a digit.
Failed to add property to '%1': %2
- Failed to add property to '%1': %2
+ %1-თვის თვისების დამატება: %2
Save dependent files
@@ -6964,7 +6964,7 @@ Choose 'Abort' to abort
Do you want to save your changes to document before closing?
- Do you want to save your changes to document before closing?
+ გსურთ შეინახოთ დოკუმენტის ცვლილებები მის დახურვამდე?
Apply answer to all
@@ -6982,7 +6982,7 @@ Choose 'Abort' to abort
Identical physical path detected. It may cause unwanted overwrite of existing document!
- Identical physical path detected. It may cause unwanted overwrite of existing document!
+ ნაპოვნია განმეორებადი მისამართი. ამან შეიძლება გამოიწვიოს არსებული დოკუმენტის არასასურველი გადაწერა!
@@ -6994,9 +6994,9 @@ Choose 'Abort' to abort
Please check report view for more...
-
+
-Please check report view for more...
+მეტის გასაგებად, გთხოვთ გაეცნოთ ანგარიშს...
@@ -7079,7 +7079,7 @@ Would you like to save the file with a different name?
Selection not allowed by filter
- Selection not allowed by filter
+ მონიშვნა უარყოფილია ფილტრის მიერ
@@ -7202,7 +7202,7 @@ Would you like to save the file with a different name?
Toggle axis cross
- კოორდინატების ღერძების ჩვენების ჩართ/გამორთ
+ ღერძების ჩვენების ჩართ/გამორთ
@@ -7262,7 +7262,7 @@ Would you like to save the file with a different name?
Opens the command line in the console
- Opens the command line in the console
+ ბრძანების ხაზის კონსოლში გახსნა
@@ -7363,7 +7363,7 @@ Would you like to save the file with a different name?
Opens a dialog to let you execute a recorded macro
- Opens a dialog to let you execute a recorded macro
+ ხსნის ფანჯარას, რომელიც საშუალებას მოგცემთ შეასრულოთ ჩაწერილი მაკრო
Macro
@@ -7442,7 +7442,7 @@ Would you like to save the file with a different name?
List of available dock panels
- List of available dock panels
+ ხელმისაწვდომი მიმაგრებადი ზოლების სია
@@ -7487,11 +7487,11 @@ Would you like to save the file with a different name?
Toggles the selected object's edit mode
- Toggles the selected object's edit mode
+ მონიშნული ობიექტის ჩასწორების რეჟიმის ჩართ/გამორთ
Activates or Deactivates the selected object's edit mode
- Activates or Deactivates the selected object's edit mode
+ მონიშნული ობიექტის ჩასწორების რეჟიმის ჩართ/გამორთ
@@ -7506,7 +7506,7 @@ Would you like to save the file with a different name?
Export an object in the active document
- Export an object in the active document
+ ობიექტის აქტიურ დოკუმენტში გატანა
No selection
@@ -7514,7 +7514,7 @@ Would you like to save the file with a different name?
Select the objects to export before choosing Export.
- Select the objects to export before choosing Export.
+ ჯერ აირჩიეთ გასატანი ობიექტები.
@@ -7540,7 +7540,7 @@ Would you like to save the file with a different name?
Recompute feature or document
- Recompute feature or document
+ დოკუმენტის ან თვისების გადათვლა
@@ -7555,7 +7555,7 @@ Would you like to save the file with a different name?
Donate to FreeCAD development
- Donate to FreeCAD development
+ შეწირულობა FreeCAD-ის განვითარებისთვის
@@ -7570,11 +7570,11 @@ Would you like to save the file with a different name?
Frequently Asked Questions on the FreeCAD website
- Frequently Asked Questions on the FreeCAD website
+ ხშირად დასმული კითხვები FreeCAD-ის ვებგვერდზე
Frequently Asked Questions
- Frequently Asked Questions
+ ხშირად დასმული კითხვები
@@ -7589,7 +7589,7 @@ Would you like to save the file with a different name?
The FreeCAD forum, where you can find help from other users
- The FreeCAD forum, where you can find help from other users
+ FreeCAD-ის ფორუმი, სადაც შეგიძლიათ მიიღოთ დახმარება სხვა მომხმარებლებისგან
The FreeCAD Forum
@@ -7604,11 +7604,11 @@ Would you like to save the file with a different name?
Python scripting documentation
- Python scripting documentation
+ Python-ზე სკრიპტების შექმნის დოკუმენტაცია
Python scripting documentation on the FreeCAD website
- Python scripting documentation on the FreeCAD website
+ Python-ის სკრიპტების დოკუმენტაცია FreeCAD-ის ვებგვერდზე
PowerUsers documentation
@@ -7657,7 +7657,7 @@ Would you like to save the file with a different name?
Freezes the current view position
- Freezes the current view position
+ ხედის მიმდინარე პოზიციის გაყინვა
@@ -7672,7 +7672,7 @@ Would you like to save the file with a different name?
Create a new group for ordering objects
- Create a new group for ordering objects
+ ობიექტების დასალაგებლად ახალი ჯგუფის შექმნა
@@ -7717,7 +7717,7 @@ Would you like to save the file with a different name?
Import a file in the active document
- Import a file in the active document
+ ფაილის აქტიურ დოკუმენტში შემოტანა
Supported formats
@@ -7751,7 +7751,7 @@ Would you like to save the file with a different name?
Import selected external link(s)
- Import selected external link(s)
+ მონიშნული გარე ბმულ(ებ)-ის შემოტანა
@@ -7766,7 +7766,7 @@ Would you like to save the file with a different name?
Import all links of the active document
- Import all links of the active document
+ აქტიური დოკუმენტის ყველა ბმულის შემოტანა
@@ -7781,7 +7781,7 @@ Would you like to save the file with a different name?
Create a link to the selected object(s)
- Create a link to the selected object(s)
+ მონიშნულ ობიექტ(ებ)-ამდე ბმულის შექმნა
@@ -7841,7 +7841,7 @@ Would you like to save the file with a different name?
Link navigation actions
- Link navigation actions
+ მოქმედებები ბმულზე გადასვლისას
@@ -7856,7 +7856,7 @@ Would you like to save the file with a different name?
Select all links to the current selected object
- Select all links to the current selected object
+ მონიშნული ობიექტის ყველა ბმულის მონიშვნა
@@ -7871,7 +7871,7 @@ Would you like to save the file with a different name?
Select the linked object and switch to its owner document
- Select the linked object and switch to its owner document
+ აირჩიეთ მიბმული ობიექტი და გადაერთეთ მისი მფლობელ დოკუმენტზე
@@ -7912,11 +7912,11 @@ Would you like to save the file with a different name?
Attach to remote debugger...
- Attach to remote debugger...
+ დისტანციურ დებაგერზე მიმაგრება...
Attach to a remotely running debugger
- Attach to a remotely running debugger
+ დისტანციურ დებაგერზე მიმაგრება
@@ -8028,7 +8028,7 @@ Would you like to save the file with a different name?
Cannot merge project with itself.
- Cannot merge project with itself.
+ პროექტის შერწყმა თავის თავთან შეუძლებელია.
%1 document (*.FCStd)
@@ -8077,7 +8077,7 @@ Would you like to save the file with a different name?
The website where the help is maintained
- The website where the help is maintained
+ ვებგვერდი, სადაც ხელმისაწვდომია დახმარება
@@ -8123,7 +8123,7 @@ Would you like to save the file with a different name?
Create a new part and make it active
- Create a new part and make it active
+ ახალი ნაწილის შექმნა და მისი აქტიურად მონიშვნა
@@ -8153,7 +8153,7 @@ Would you like to save the file with a different name?
Place the selected objects
- Place the selected objects
+ მონიშნული ობიექტების მოთავსება
@@ -8232,7 +8232,7 @@ Would you like to save the file with a different name?
Utility to extract or create project files
- Utility to extract or create project files
+ პროექტის ფაილების შექმნის ან დაშლის ხელსაწყო
@@ -8247,7 +8247,7 @@ Would you like to save the file with a different name?
The official Python website
- The official Python website
+ Python-ის ოფიციალური ვებგვერდი
@@ -8318,7 +8318,7 @@ Would you like to save the file with a different name?
Redoes a previously undone action
- Redoes a previously undone action
+ გაუქმებული მოქმედების გამეორება
@@ -8333,7 +8333,7 @@ Would you like to save the file with a different name?
Recomputes the current active document
- Recomputes the current active document
+ აქტიური დოკუმენტის გადათვლა
@@ -8528,7 +8528,7 @@ Would you like to save the file with a different name?
Sets the display properties of the selected object
- Sets the display properties of the selected object
+ ადგენს მონიშნული ობიექტის ჩვენების თვისებებს
@@ -8659,7 +8659,7 @@ Would you like to save the file with a different name?
Toggle between navigation and edit mode
- Toggle between navigation and edit mode
+ ნავიგაციისა და ჩასწორების რეჟიმებს შორის გადართვა
@@ -8674,7 +8674,7 @@ Would you like to save the file with a different name?
Toggles visibility of all objects in the active document
- Toggles visibility of all objects in the active document
+ აქტიურ დოკუმენტში ყველა ობიექტის ხილვადობის ჩართ/გამორთ
@@ -8749,7 +8749,7 @@ Would you like to save the file with a different name?
Transform the selected object in the 3d view
- Transform the selected object in the 3d view
+ მონიშნული ობიექტის გარდაქმნა 3D ხედში
@@ -8764,7 +8764,7 @@ Would you like to save the file with a different name?
Collapse currently selected tree items
- Collapse currently selected tree items
+ ხის მონიშნული ელემენტების ჩაკეცვა
@@ -8794,7 +8794,7 @@ Would you like to save the file with a different name?
Select all instances of the current selected object
- Select all instances of the current selected object
+ მონიშნული ობიექტის ყველა ასლის მონიშვნა
@@ -8839,7 +8839,7 @@ Would you like to save the file with a different name?
Start the units calculator
- Start the units calculator
+ საზომი ერთეულების კალკულატორის გაშვება
@@ -8850,7 +8850,7 @@ Would you like to save the file with a different name?
Defines behavior when editing an object from tree
- Defines behavior when editing an object from tree
+ განსაზღვრავს ქცევას ობიექტის ხიდან ჩასწორებისას
@@ -8895,7 +8895,7 @@ Would you like to save the file with a different name?
Creates a new view window for the active document
- Creates a new view window for the active document
+ ქმნისა ქტიური დოკუმენტის ხედის ახალ ფანჯარას
@@ -8985,7 +8985,7 @@ Would you like to save the file with a different name?
Fits the selected content on the screen
- Fits the selected content on the screen
+ მონიშნულის ეკრანის ზომებში ჩატევა
@@ -9015,7 +9015,7 @@ Would you like to save the file with a different name?
Set to default home view
- Set to default home view
+ საწყისი ხედის ნაგულისხმევა დაყენება
@@ -9105,7 +9105,7 @@ Would you like to save the file with a different name?
Switch stereo viewing to quad buffer
- Switch stereo viewing to quad buffer
+ სტერეოხედის ოთხმაგ ბაფერზე გადართვა
@@ -9120,7 +9120,7 @@ Would you like to save the file with a different name?
Switch stereo viewing to red/cyan
- Switch stereo viewing to red/cyan
+ სტერეოხედის წითელ/ალისფერზე გადართვა
@@ -9210,7 +9210,7 @@ Would you like to save the file with a different name?
Rotate the view by 90° clockwise
- Rotate the view by 90° clockwise
+ ხედის საათის მიმართულებით 90°-ით შებრუნება
@@ -9341,7 +9341,7 @@ Would you like to save the file with a different name?
Display the main window in fullscreen mode
- Display the main window in fullscreen mode
+ მთავარი ფანჯრის მთელ ეკრანზე ჩვენება
@@ -9371,7 +9371,7 @@ Would you like to save the file with a different name?
Switches to perspective view mode
- Switches to perspective view mode
+ პერსპექტივის ხედის რეჟიმზე გადართვა
@@ -9382,7 +9382,7 @@ Would you like to save the file with a different name?
Expand active document and collapse all others
- Expand active document and collapse all others
+ აქტიური დოკუმენტის გაფართოება და ყველა დანარჩენის ჩაკეცვა
TreeView
@@ -9408,7 +9408,7 @@ Would you like to save the file with a different name?
StdTreeMultiDocument
Display all documents in the tree view
- Display all documents in the tree view
+ დოკუმენტის ხის ფანჯარაში ყველა დოკუმენტის ჩვენება
TreeView
@@ -9592,7 +9592,7 @@ Would you like to save the file with a different name?
Creates a screenshot of the active view
- Creates a screenshot of the active view
+ მიმდინარე ხედის სურათად ჩაწერა
@@ -9756,7 +9756,7 @@ Do you still want to proceed?
Std_Revert
This will discard all the changes since last file save.
- This will discard all the changes since last file save.
+ ფაილის ბოლო შენახვის შემდეგ ყველა ცვლილების გაუქმება.
Revert document
@@ -9786,7 +9786,7 @@ Do you still want to proceed?
Set View to Orthographic mode
- Set View to Orthographic mode
+ ხედის ორთოგრაფიულ რეჟიმზე დაყენება
@@ -9797,7 +9797,7 @@ Do you still want to proceed?
Set View to Perspective mode
- Set View to Perspective mode
+ ხედის პერსპექტიულ პროექციაზე დაყენება
@@ -9808,7 +9808,7 @@ Do you still want to proceed?
Zoom so that model fills the view
- Zoom so that model fills the view
+ ხედიის ზომებამდე გადიდება
@@ -9908,7 +9908,7 @@ p, li { white-space: pre-wrap; }
Choose the style of the Task Panel
- Choose the style of the Task Panel
+ აირჩიეთ მონაცემების პანელის სტილი
Default
diff --git a/src/Gui/Language/FreeCAD_ro.qm b/src/Gui/Language/FreeCAD_ro.qm
index f7668caabf..ecb018c47d 100644
Binary files a/src/Gui/Language/FreeCAD_ro.qm and b/src/Gui/Language/FreeCAD_ro.qm differ
diff --git a/src/Gui/Language/FreeCAD_ro.ts b/src/Gui/Language/FreeCAD_ro.ts
index 061a45f3a8..ec44469031 100644
--- a/src/Gui/Language/FreeCAD_ro.ts
+++ b/src/Gui/Language/FreeCAD_ro.ts
@@ -2633,7 +2633,7 @@ opening or creation
Show axis cross by default
- Show axis cross by default
+ Afișare implicită a sistemului de axe
Pick radius (px):
@@ -2651,9 +2651,9 @@ Valoare mai mare ușurează selecția elementelor, dar poate face imposibilă se
This option is useful for troubleshooting graphics card and driver problems.
Changing this option requires a restart of the application.
- This option is useful for troubleshooting graphics card and driver problems.
+ Această opțiune este utilă pentru depanarea problemelor legate de placa grafică și a driverului acesteia.
-Changing this option requires a restart of the application.
+Modificarea acestei opțiuni necesită repornirea aplicației.
Use software OpenGL
@@ -2661,15 +2661,15 @@ Changing this option requires a restart of the application.
What kind of multisample anti-aliasing is used
- What kind of multisample anti-aliasing is used
+ Ce tip de antialiasing multisample se utilizează
Eye-to-eye distance used for stereo projections.
The specified value is a factor that will be multiplied with the
bounding box size of the 3D object that is currently displayed.
- Eye-to-eye distance used for stereo projections.
-The specified value is a factor that will be multiplied with the
-bounding box size of the 3D object that is currently displayed.
+ Distanţa dintre ochi utilizată pentru proiecţiile stereo.
+Valoarea specificată este un factor care va fi multiplicat cu
+dimensiunea casetei de încadrare a obiectului 3D care este afișat în prezent.
@@ -2955,11 +2955,11 @@ rula automat un fişier de recuperare la pornire.
How often a recovery file is written
- How often a recovery file is written
+ Cât de des este scris un fișier de recuperare
A thumbnail will be stored when document is saved
- A thumbnail will be stored when document is saved
+ O imagine în miniatură va fi stocată când documentul este salvat
Size
@@ -2968,26 +2968,26 @@ rula automat un fişier de recuperare la pornire.
Sets the size of the thumbnail that is stored in the document.
Common sizes are 128, 256 and 512
- Sets the size of the thumbnail that is stored in the document.
-Common sizes are 128, 256 and 512
+ Setează dimensiunea imaginii miniaturale care este stocată în document.
+Dimensiunile comune sunt 128, 256 și 512
The program logo will be added to the thumbnail
- The program logo will be added to the thumbnail
+ Logo-ul programului va fi adăugat la imaginea miniaturală
How many backup files will be kept when saving document
- How many backup files will be kept when saving document
+ Câte fişiere de rezervă vor fi păstrate la salvarea documentului
Backup files will get extension '.FCbak' and file names
get date suffix according to the specified format
- Backup files will get extension '.FCbak' and file names
-get date suffix according to the specified format
+ Fișierele de rezervă vor primi extensia '.FCbak' și numele fișierelor
+obțin sufixul datei în conformitate cu formatul specificat
Use date and FCBak extension
- Use date and FCBak extension
+ Utilizează data și extensia FCBak
Date format
@@ -2995,7 +2995,7 @@ get date suffix according to the specified format
Allow objects to have same label/name
- Allow objects to have same label/name
+ Permite obiectelor să aibă aceeași etichetă/nume
Enable partial loading of external linked documents.
@@ -3003,27 +3003,27 @@ Then only referenced objects and their dependencies will be loaded
when a linked document is auto-opened together with the main document.
A partially loaded document cannot be edited. Double click the document
icon in the tree view to fully reload it.
- Enable partial loading of external linked documents.
-Then only referenced objects and their dependencies will be loaded
-when a linked document is auto-opened together with the main document.
-A partially loaded document cannot be edited. Double click the document
-icon in the tree view to fully reload it.
+ Activați încărcarea parțială a documentelor externe conectate.
+Apoi doar obiectele referențiate și dependențele lor vor fi încărcate
+atunci când un document conectat este deschis automat împreună cu documentul principal.
+Un document parțial încărcat nu poate fi editat. Faceți dublu clic pe pictograma documentului
+din vizualizarea arbore, pentru a-l reîncărca complet.
Disable partial loading of external linked objects
- Disable partial loading of external linked objects
+ Dezactivează încărcarea parțială a obiectelor externe conectate
All documents that will be created will get the specified author name.
Keep blank for anonymous.
You can also use the form: John Doe <john@doe.com>
- All documents that will be created will get the specified author name.
-Keep blank for anonymous.
-You can also use the form: John Doe <john@doe.com>
+ Toate documentele care vor fi create vor primi numele autorului specificat.
+Păstrați necompletat pentru anonim.
+Puteți folosi și formatul: John Doe <john@doe.com>
The field 'Last modified by' will be set to specified author when saving the file
- The field 'Last modified by' will be set to specified author when saving the file
+ Câmpul 'Ultima modificare de' va fi setat pe autorul specificat la salvarea fișierului
Default company name to use for new files
@@ -3290,23 +3290,23 @@ You can also use the form: John Doe <john@doe.com>
Gui::Dialog::DlgSettingsLazyLoaded
Workbench Name
- Workbench Name
+ Numele bancului de lucru
Autoload?
- Autoload?
+ Încărcare automată?
Load Now
- Load Now
+ Încarcă acum
<html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html>
- <html><head/><body><p>To preserve resources, FreeCAD does not load workbenches until they are used. Loading them may provide access to additional preferences related to their functionality.</p><p>The following workbenches are available in your installation:</p></body></html>
+ <html><head/><body><p>Pentru a păstra resursele, FreeCAD nu încarcă bancurile de lucru până nu sunt utilizate. Încărcarea lor poate oferi acces la opțiuni suplimentare legate de funcționalitatea lor.</p><p>Următoarele bancuri de lucru sunt instalate și disponibile:</p></body></html>
Available Workbenches
- Available Workbenches
+ Bancuri de lucru disponibile
@@ -3317,27 +3317,27 @@ You can also use the form: John Doe <john@doe.com>
Autoload
- Autoload
+ Încărcare automată
If checked
- If checked
+ Dacă este bifat
will be loaded automatically when FreeCAD starts up
- will be loaded automatically when FreeCAD starts up
+ va fi încărcat automat când FreeCAD pornește
This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change.
- This is the current startup module, and must be autoloaded. See Preferences/General/Autoload to change.
+ Acesta este modulul curent de pornire și trebuie să fie încărcat automat. Vezi Preferințe/Generale/Autoîncărcate pentru modificare.
Loaded
- Loaded
+ Încărcat
Load now
- Load now
+ Încarcă acum
@@ -3392,51 +3392,51 @@ You can also use the form: John Doe <john@doe.com>
Variables defined by macros are created as local variables
- Variables defined by macros are created as local variables
+ Variabilele definite de macro-uri sunt create ca variabile locale
Commands executed by macro scripts are shown in Python console
- Commands executed by macro scripts are shown in Python console
+ Comenzile executate de scripturile macro sunt afișate în consola Python
Recorded macros will also contain user interface commands
- Recorded macros will also contain user interface commands
+ Macro-urile înregistrate vor conține și comenzi ale interfeței utilizatorului
Recorded macros will also contain user interface commands as comments
- Recorded macros will also contain user interface commands as comments
+ Macro-urile înregistrate vor conține, de asemenea, comenzile interfeței utilizatorului ca și comentarii
The directory in which the application will search for macros
- The directory in which the application will search for macros
+ Directorul în care aplicația va căuta macro-uri
Recent macros menu
- Recent macros menu
+ Meniu cu macro-uri recente
Size of recent macro list
- Size of recent macro list
+ Dimensiunea listei cu macro-uri recente
How many macros should be listed in recent macros list
- How many macros should be listed in recent macros list
+ Câte macro-uri ar trebui să fie listate în lista de macro-uri recente
Shortcut count
- Shortcut count
+ Numărul de comenzi rapide
How many recent macros should have shortcuts
- How many recent macros should have shortcuts
+ Câte macro-uri recente ar trebui să aibă comenzi rapide
Keyboard Modifiers
- Keyboard Modifiers
+ Modificatori de tastatură
Keyboard modifiers, default = Ctrl+Shift+
- Keyboard modifiers, default = Ctrl+Shift+
+ Modificatori de tastatură, implicit = Ctrl+Shift+
@@ -3463,7 +3463,7 @@ You can also use the form: John Doe <john@doe.com>
Corner where navigation cube is shown
- Corner where navigation cube is shown
+ Colțul unde este afișat cubul de navigație
Top left
@@ -3488,8 +3488,8 @@ You can also use the form: John Doe <john@doe.com>
List the mouse button configs for each chosen navigation setting.
Select a set and then press the button to view said configurations.
- List the mouse button configs for each chosen navigation setting.
-Select a set and then press the button to view said configurations.
+ Listează configurările butonului mouse-ului pentru fiecare setare de navigare aleasă.
+Selectează un set și apoi apasă butonul pentru a vedea configurația menționată.
Mouse...
@@ -3497,7 +3497,7 @@ Select a set and then press the button to view said configurations.
Navigation settings set
- Navigation settings set
+ Set de setări de navigație
Orbit style
@@ -3543,7 +3543,7 @@ The value is the diameter of the sphere to fit on the screen.
Zoom operations will be performed at position of mouse pointer
- Zoom operations will be performed at position of mouse pointer
+ Operațiunile de zoom vor fi efectuate la poziția indicatorului mouse-ului
Zoom at cursor
@@ -3555,7 +3555,7 @@ The value is the diameter of the sphere to fit on the screen.
Direction of zoom operations will be inverted
- Direction of zoom operations will be inverted
+ Direcția operațiunilor de zoom va fi inversată
Invert zoom
@@ -3565,9 +3565,9 @@ The value is the diameter of the sphere to fit on the screen.
Prevents view tilting when pinch-zooming.
Affects only gesture navigation style.
Mouse tilting is not disabled by this setting.
- Prevents view tilting when pinch-zooming.
-Affects only gesture navigation style.
-Mouse tilting is not disabled by this setting.
+ Previne înclinarea vizualizării atunci când se face zoom prin ciupire pe ecranul tactil.
+Afectează numai stilul de navigare prin gesturi.
+Înclinarea cu mouse-ul nu este dezactivată de această setare.
Disable touchscreen tilt gesture
@@ -3575,7 +3575,7 @@ Mouse tilting is not disabled by this setting.
Rotations in 3D will use current cursor position as center for rotation
- Rotations in 3D will use current cursor position as center for rotation
+ Rotațiile în 3D vor utiliza poziția curentă a cursorului ca centru de rotație
Isometric
@@ -3676,11 +3676,11 @@ Pasul de mărire de '1' înseamnă un factor de 7,5 pentru fiecare pas de mărir
Auto expand tree item when the corresponding object is selected in 3D view
- Auto expand tree item when the corresponding object is selected in 3D view
+ Extinde automat vederea arborescentă atunci când obiectul corespunzător este selectat în vizualizarea 3D
Preselect the object in 3D view when mouse over the tree item
- Preselect the object in 3D view when mouse over the tree item
+ Preselectează obiectul în vizualizarea 3D când mouse-ul este deasupra elementului în vizualizarea arborescentă
Record selection in tree view in order to go back/forward using navigation button
@@ -3775,15 +3775,15 @@ Pasul de mărire de '1' înseamnă un factor de 7,5 pentru fiecare pas de mărir
Number of decimals that should be shown for numbers and dimensions
- Number of decimals that should be shown for numbers and dimensions
+ Numărul de zecimale care ar trebui afișate pentru numere și dimensiuni
Unit system that should be used for all parts the application
- Unit system that should be used for all parts the application
+ Sistem unităților de măsură care ar trebui să fie utilizat pentru toate componentele aplicației
Minimum fractional inch to be displayed
- Minimum fractional inch to be displayed
+ Fracțiunea minimă de inch care va fi afișată
Building US (ft-in/sqft/cft)
@@ -3878,11 +3878,11 @@ Pasul de mărire de '1' înseamnă un factor de 7,5 pentru fiecare pas de mărir
Background color for objects in tree view that are currently edited
- Background color for objects in tree view that are currently edited
+ Culoare de fundal pentru obiecte în vizualizarea arborescentă care sunt acum editate
Background color for active containers in tree view
- Background color for active containers in tree view
+ Culoarea de fundal pentru containerele active în vizualizarea arborescentă
@@ -3938,7 +3938,7 @@ Pentru a adăuga un calcul apăsați Enter în câmpul de introducere a valorii<
Quantity
- Quantity
+ Cantitate
Unit system:
@@ -3947,39 +3947,39 @@ Pentru a adăuga un calcul apăsați Enter în câmpul de introducere a valorii<
Unit system to be used for the Quantity
The preference system is the one set in the general preferences.
- Unit system to be used for the Quantity
-The preference system is the one set in the general preferences.
+ Sistem de unități care va fi folosit pentru Cantitate
+Sistemul preferat este cel ales în preferințele generale.
Decimals:
- Decimals:
+ Zecimale:
Decimals for the Quantity
- Decimals for the Quantity
+ Zecimale pentru Cantitate
Unit category:
- Unit category:
+ Categoria unității:
Unit category for the Quantity
- Unit category for the Quantity
+ Categoria unității pentru Cantitate
Copy the result into the clipboard
- Copy the result into the clipboard
+ Copiază rezultatul în clipboard
Gui::Dialog::DlgUnitsCalculator
unit mismatch
- unit mismatch
+ unitățile de măsură nu se potrivesc
unknown unit:
- unknown unit:
+ unitatede măsură necunoscută:
@@ -4042,7 +4042,7 @@ The preference system is the one set in the general preferences.
<html><head/><body><p><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt; font-weight:600;">Note:</span><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;"> The changes become active the next time you start the application</span></p></body></html>
- <html><head/><body><p><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt; font-weight:600;">Note:</span><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;"> The changes become active the next time you start the application</span></p></body></html>
+ <html><head/><body><p><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt; font-weight:600;">Notă:</span><span style=" font-family:'MS Shell Dlg 2'; font-size:8pt;"> Modificările devin active data viitoare când porniți aplicația</span></p></body></html>
@@ -4359,7 +4359,7 @@ The 'Status' column shows whether the document could be recovered.
Do you really want to remove this parameter group?
- Do you really want to remove this parameter group?
+ Sigur dorești să ștergi acest grup de parametrii?
@@ -4501,35 +4501,35 @@ The 'Status' column shows whether the document could be recovered.
Please select 1, 2, or 3 points before clicking this button. A point may be on a vertex, face, or edge. If on a face or edge the point used will be the point at the mouse position along face or edge. If 1 point is selected it will be used as the center of rotation. If 2 points are selected the midpoint between them will be the center of rotation and a new custom axis will be created, if needed. If 3 points are selected the first point becomes the center of rotation and lies on the vector that is normal to the plane defined by the 3 points. Some distance and angle information is provided in the report view, which can be useful when aligning objects. For your convenience when Shift + click is used the appropriate distance or angle is copied to the clipboard.
- Please select 1, 2, or 3 points before clicking this button. A point may be on a vertex, face, or edge. If on a face or edge the point used will be the point at the mouse position along face or edge. If 1 point is selected it will be used as the center of rotation. If 2 points are selected the midpoint between them will be the center of rotation and a new custom axis will be created, if needed. If 3 points are selected the first point becomes the center of rotation and lies on the vector that is normal to the plane defined by the 3 points. Some distance and angle information is provided in the report view, which can be useful when aligning objects. For your convenience when Shift + click is used the appropriate distance or angle is copied to the clipboard.
+ Vă rugăm să selectaţi 1, 2 sau 3 puncte înainte de a face clic pe acest buton. Un punct poate fi pe un vârf, faţă, sau muchie. Dacă este pe o față sau o muchie, punctul folosit va fi punctul de la poziția mouse-ului de-a lungul feței sau muchiei respective. Dacă este selectat un punct, acesta va fi folosit ca centru de rotaţie. Dacă 2 puncte sunt selectate punctul intermediar dintre ele va fi centrul de rotație și va fi creată o nouă axă personalizată, dacă este necesar. Dacă sunt selectate 3 puncte, primul punct devine centrul de rotaţie şi se află pe vectorul care este normal planului definit de cele 3 puncte. Unele informații privind distanța și unghiul sunt furnizate în vizualizarea raport, ceea ce poate fi util la alinierea obiectelor. Pentru confortul tău când Shift + click este folosit distanța sau unghiul corespunzător este copiat în clipboard.
Pitch (around y-axis):
- Pitch (around y-axis):
+ Rotire (în jurul axei Y):
Roll (around x-axis):
- Roll (around x-axis):
+ Rotire (în jurul axei X):
Yaw (around z-axis):
- Yaw (around z-axis):
+ Rotire (în jurul axei Z):
Yaw (around z-axis)
- Yaw (around z-axis)
+ Rotire (în jurul axei Z)
Pitch (around y-axis)
- Pitch (around y-axis)
+ Rotire (în jurul axei Y)
Roll (around the x-axis)
- Roll (around the x-axis)
+ Rotire (în jurul axei X)
Euler angles (zy'x'')
- Euler angles (zy'x'')
+ Unghiuri Euler (zy'x'')
@@ -4551,7 +4551,7 @@ The 'Status' column shows whether the document could be recovered.
winpdb
- winpdb
+ winpdb
Password:
@@ -4559,19 +4559,19 @@ The 'Status' column shows whether the document could be recovered.
VS Code
- VS Code
+ Cod VS
Address:
- Address:
+ Adresă:
Port:
- Port:
+ Port:
Redirect output
- Redirect output
+ Redirecționare ieșire
@@ -4658,15 +4658,15 @@ The 'Status' column shows whether the document could be recovered.
Gui::DlgObjectSelection
Object selection
- Object selection
+ Selecție obiect
The selected objects contain other dependencies. Please select which objects to export. All dependencies are auto selected by default.
- The selected objects contain other dependencies. Please select which objects to export. All dependencies are auto selected by default.
+ Obiectele selectate conțin alte dependențe. Vă rugăm să selectați obiectele pentru export. Toate dependențele sunt automat selectate în mod implicit.
Dependency
- Dependency
+ Dependenţă
Document
@@ -4694,13 +4694,13 @@ The 'Status' column shows whether the document could be recovered.
&Use Original Selections
- &Use Original Selections
+ Utilizează &alegerile originale
Ignore dependencies and proceed with objects
originally selected prior to opening this dialog
- Ignore dependencies and proceed with objects
-originally selected prior to opening this dialog
+ Ignoră dependențele și continuă cu obiectele
+selectate inițial, înainte de a deschide acest dialog
@@ -4784,7 +4784,7 @@ originally selected prior to opening this dialog
Log messages
- Log messages
+ Înregistrează mesajele
Warnings
@@ -5042,7 +5042,7 @@ Doriți să salvați modificările?
Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition.
- Drag screen with one finger OR press left mouse button. In Sketcher && other edit modes, hold Alt in addition.
+ Glisați un singur deget pe ecran SAU apăsați butonul stâng al mouse-ului. În Sketcher și în alte moduri de editare, țineți și tasta Alt apăsată.
Pinch (place two fingers on the screen && drag them apart from || towards each other) OR scroll middle mouse button OR PgUp/PgDown on keyboard.
@@ -5234,13 +5234,13 @@ Doriți să salvați modificările?
The exported object contains external link. Please save the documentat least once before exporting.
- The exported object contains external link. Please save the documentat least once before exporting.
+ Obiectul exportat conține o legătură externă. Vă rugăm să salvați documentul cel puțin o dată înainte de al exporta.
To link to external objects, the document must be saved at least once.
Do you want to save the document now?
- To link to external objects, the document must be saved at least once.
-Do you want to save the document now?
+ Pentru face legăturile la obiecte externe, documentul trebuie salvat cel puțin o dată.
+Doriți să salvați documentul acum?
@@ -5340,15 +5340,15 @@ Cum doresti sa continuam?
Drag screen with two fingers OR press ALT + middle mouse button.
- Drag screen with two fingers OR press ALT + middle mouse button.
+ Glisați două degete pe ecran SAU apăsați ALT + butonul mijlociu al mouse-ului.
Drag screen with one finger OR press ALT + left mouse button. In Sketcher and other edit modes, hold Alt in addition.
- Drag screen with one finger OR press ALT + left mouse button. In Sketcher and other edit modes, hold Alt in addition.
+ Glisați un singur deget pe ecran SAU apăsați ALT + butonul stâng al mouse-ului. În Sketcher și în alte moduri de editare, țineți apăsat și pe Alt.
Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR press ALT + right mouse button OR PgUp/PgDown on keyboard.
- Pinch (place two fingers on the screen and drag them apart from or towards each other) OR scroll middle mouse button OR press ALT + right mouse button OR PgUp/PgDown on keyboard.
+ Ciupiți (puneți două degete pe ecran și glisați-le divergent). Sau scroll cu rotița din mijloc de la mouse. Sau apăsați PgUp/PgDown pe tastatură.
@@ -6054,7 +6054,7 @@ Doriţi să specificaţi un alt director?
Bulgarian
- Bulgarian
+ Bulgară
Greek
@@ -6062,7 +6062,7 @@ Doriţi să specificaţi un alt director?
Spanish, Argentina
- Spanish, Argentina
+ Spaniolă, Argentina
@@ -6163,7 +6163,7 @@ Doriţi să specificaţi un alt director?
Show hidden tree view items
- Show hidden tree view items
+ Arată elementele ascunse în vederea arborescentă
Hide item
@@ -6171,43 +6171,43 @@ Doriţi să specificaţi un alt director?
Hide the item in tree
- Hide the item in tree
+ Ascunde elementul în vederea arborescentă
Close document
- Close document
+ Închide documentul
Close the document
- Close the document
+ Închide documentul
Reload document
- Reload document
+ Reîncarcă documentul
Reload a partially loaded document
- Reload a partially loaded document
+ Reîncarcă un document parțial încărcat
Allow partial recomputes
- Allow partial recomputes
+ Permite recompilări parțiale
Enable or disable recomputating editing object when 'skip recomputation' is enabled
- Enable or disable recomputating editing object when 'skip recomputation' is enabled
+ Activați sau dezactivați recalcularea editării obiectului atunci când este activat 'săriți peste recalculare'
Recompute object
- Recompute object
+ Recalculare obiect
Recompute the selected object
- Recompute the selected object
+ Recalculează obiectul selectat
(but must be executed)
- (but must be executed)
+ (dar trebuie executat)
@@ -6811,7 +6811,7 @@ Retineti: locul unde faceti click conteaza.
The exported object contains external link. Please save the documentat least once before exporting.
- The exported object contains external link. Please save the documentat least once before exporting.
+ Obiectul exportat conține o legătură externă. Vă rugăm să salvați documentul cel puțin o dată înainte de al exporta.
Delete failed
@@ -6839,57 +6839,57 @@ Retineti: locul unde faceti click conteaza.
Expression error
- Expression error
+ Eroare de expresie
Failed to parse some of the expressions.
Please check the Report View for more details.
- Failed to parse some of the expressions.
-Please check the Report View for more details.
+ Eșec în analiza unora dintre expresii.
+Verificați fereastra Raport pentru mai multe detalii.
Failed to paste expressions
- Failed to paste expressions
+ Nu s-a reușit lipirea expresiilor
Simple group
- Simple group
+ Grup simplu
Group with links
- Group with links
+ Grup cu legături
Group with transform links
- Group with transform links
+ Grup cu legături de transformare
Create link group failed
- Create link group failed
+ Crearea grupului cu legături a eșuat
Create link failed
- Create link failed
+ Crearea legăturii a eșuat
Failed to create relative link
- Failed to create relative link
+ Crearea legăturii relative a eșuat
Unlink failed
- Unlink failed
+ Ruperea legăturii a eșuat
Replace link failed
- Replace link failed
+ Înlocuirea legăturii a eșuat
Failed to import links
- Failed to import links
+ Importul legăturilor a eșuat
Failed to import all links
- Failed to import all links
+ Importul tuturor legăturilor a eșuat
Invalid name
@@ -6898,12 +6898,12 @@ Please check the Report View for more details.
The property name or group name must only contain alpha numericals,
underscore, and must not start with a digit.
- The property name or group name must only contain alpha numericals,
-underscore, and must not start with a digit.
+ Numele proprietății sau al grupului trebuie să conțină doar caractere alfanumerice sau
+liniuță jos și nu trebuie să înceapă cu o cifră.
The property '%1' already exists in '%2'
- The property '%1' already exists in '%2'
+ Proprietatea '%1' există deja în '%2'
Add property
@@ -6911,7 +6911,7 @@ underscore, and must not start with a digit.
Failed to add property to '%1': %2
- Failed to add property to '%1': %2
+ Nu am putut adăuga proprietatea la '%1': %2
Save dependent files
@@ -6919,15 +6919,15 @@ underscore, and must not start with a digit.
The file contains external dependencies. Do you want to save the dependent files, too?
- The file contains external dependencies. Do you want to save the dependent files, too?
+ Fișierul conține dependențe externe. Doriți să salvați și fișierele dependente?
Failed to save document
- Failed to save document
+ Salvarea documentului nu a reușit
Documents contains cyclic dependencies. Do you still want to save them?
- Documents contains cyclic dependencies. Do you still want to save them?
+ Documentele conţin dependenţe ciclice. Mai doriţi să le salvaţi?
Undo
@@ -6945,9 +6945,9 @@ underscore, and must not start with a digit.
Choose 'Yes' to roll back all preceding transactions.
Choose 'No' to roll back in the active document only.
Choose 'Abort' to abort
- Choose 'Yes' to roll back all preceding transactions.
-Choose 'No' to roll back in the active document only.
-Choose 'Abort' to abort
+ Alege 'Da' pentru a derula toate tranzacțiile precedente.
+Alege 'Nu' pentru a derula doar în documentul activ.
+Alege 'Abandonează' pentru a abandona
Do you want to save your changes to document before closing?
@@ -7027,7 +7027,7 @@ Cale fizică:
Could not save document
- Could not save document
+ Documentul nu a putut fi salvat
There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details:
@@ -7035,27 +7035,27 @@ Cale fizică:
"%1"
Would you like to save the file with a different name?
- There was an issue trying to save the file. This may be because some of the parent folders do not exist, or you do not have sufficient permissions, or for other reasons. Error details:
+ A apărut o problemă în încercarea de a salva fișierul. Acest lucru se poate datora faptului ca unele directoare părinte nu exista sau nu aveti suficiente permisiuni sau din alte motive. Detaliile erorii:
"%1"
-Would you like to save the file with a different name?
+Doriți să salvați fișierul cu alt nume?
Document not saved
- Document not saved
+ Document nesalvat
The document%1 could not be saved. Do you want to cancel closing it?
- The document%1 could not be saved. Do you want to cancel closing it?
+ Documentul%1 nu a putut fi salvat. Doriți să renunțați la închiderea acestuia?
%1 Document(s) not saved
- %1 Document(s) not saved
+ %1 Document(e) nu au fost salvate
Some documents could not be saved. Do you want to cancel closing?
- Some documents could not be saved. Do you want to cancel closing?
+ Unele documente nu au putut fi salvate. Doriți să renunțați la închiderea documentelor?
@@ -8286,11 +8286,11 @@ Would you like to save the file with a different name?
Recent macros
- Recent macros
+ Macro-uri recente
Recent macro list
- Recent macro list
+ Lista cu macro-uri recente
@@ -8361,11 +8361,11 @@ Would you like to save the file with a different name?
Save All
- Save All
+ Salvează tot
Save all opened document
- Save all opened document
+ Salvează toate documentele deschise
@@ -8575,7 +8575,7 @@ Would you like to save the file with a different name?
Add text document to active document
- Add text document to active document
+ Adăugare document text la documentul activ
@@ -8747,11 +8747,11 @@ Would you like to save the file with a different name?
Collapse selected item
- Collapse selected item
+ Restrânge elementul selectat
Collapse currently selected tree items
- Collapse currently selected tree items
+ Restrânge elementele selectate ale arborelui
@@ -8762,11 +8762,11 @@ Would you like to save the file with a different name?
Expand selected item
- Expand selected item
+ Extinde elementul selectat
Expand currently selected tree items
- Expand currently selected tree items
+ Extinde elementele selectate ale arborelui
@@ -8777,11 +8777,11 @@ Would you like to save the file with a different name?
Select all instances
- Select all instances
+ Selectează toate instanțele
Select all instances of the current selected object
- Select all instances of the current selected object
+ Selectați toate instanțele obiectului selectat
@@ -8792,7 +8792,7 @@ Would you like to save the file with a different name?
TreeView actions
- TreeView actions
+ Actiuni ale vizualizării arbore
TreeView behavior options and actions
@@ -8833,11 +8833,11 @@ Would you like to save the file with a different name?
StdCmdUserEditMode
Edit mode
- Edit mode
+ Modul de editare
Defines behavior when editing an object from tree
- Defines behavior when editing an object from tree
+ Definește comportamentul la editarea unui obiect din vizualizarea arborescentă
@@ -8882,7 +8882,7 @@ Would you like to save the file with a different name?
Creates a new view window for the active document
- Creates a new view window for the active document
+ Creează o nouă fereastră de vizualizare pentru documentul activ
@@ -8897,7 +8897,7 @@ Would you like to save the file with a different name?
Set to dimetric view
- Set to dimetric view
+ Setează vizualizarea dimetrică
@@ -8998,7 +8998,7 @@ Would you like to save the file with a different name?
Home
- Home
+ Acasă
Set to default home view
@@ -9017,7 +9017,7 @@ Would you like to save the file with a different name?
Set to isometric view
- Set to isometric view
+ Setează vizualizarea izometrică
@@ -9148,11 +9148,11 @@ Would you like to save the file with a different name?
Restore saved camera
- Restore saved camera
+ Restaurează camera salvată
Restore saved camera settings
- Restore saved camera settings
+ Restaurează setările de cameră salvate
@@ -9182,7 +9182,7 @@ Would you like to save the file with a different name?
Rotate the view by 90° counter-clockwise
- Rotate the view by 90° counter-clockwise
+ Rotește vizualizarea cu 90° în sens antiorar
@@ -9197,7 +9197,7 @@ Would you like to save the file with a different name?
Rotate the view by 90° clockwise
- Rotate the view by 90° clockwise
+ Rotește vizualizarea cu 90° în sens orar
@@ -9208,11 +9208,11 @@ Would you like to save the file with a different name?
Save current camera
- Save current camera
+ Salvează camera curentă
Save current camera settings
- Save current camera settings
+ Salvează setările curente ale camerei
@@ -9242,7 +9242,7 @@ Would you like to save the file with a different name?
Set to trimetric view
- Set to trimetric view
+ Setează vizualizarea trimetrică
@@ -9365,71 +9365,71 @@ Would you like to save the file with a different name?
StdTreeCollapseDocument
Collapse/Expand
- Collapse/Expand
+ Restrânge/Extinde
Expand active document and collapse all others
- Expand active document and collapse all others
+ Extinde documentul activ și restrângele pe toate celelalte
TreeView
- TreeView
+ Vizualizare arborescentă
StdTreeDrag
TreeView
- TreeView
+ Vizualizare arborescentă
Initiate dragging
- Initiate dragging
+ Inițiază glisare
Initiate dragging of current selected tree items
- Initiate dragging of current selected tree items
+ Inițiază glisarea elementelor curent selectate din vederea arborescentă
StdTreeMultiDocument
Display all documents in the tree view
- Display all documents in the tree view
+ Afişează toate documentele în vizualizarea arborescentă
TreeView
- TreeView
+ Vizualizare arborescentă
Multi document
- Multi document
+ Document multiplu
StdTreePreSelection
TreeView
- TreeView
+ Vizualizare arborescentă
Pre-selection
- Pre-selection
+ Preselecție
Preselect the object in 3D view when mouse over the tree item
- Preselect the object in 3D view when mouse over the tree item
+ Preselectează obiectul în vizualizarea 3D când mouse-ul este deasupra elementului în vizualizarea arborescentă
StdTreeRecordSelection
TreeView
- TreeView
+ Vizualizare arborescentă
Record selection
- Record selection
+ Înregistrare selecție
Record selection in tree view in order to go back/forward using navigation button
@@ -9440,7 +9440,7 @@ Would you like to save the file with a different name?
StdTreeSelection
TreeView
- TreeView
+ Vizualizare arborescentă
Go to selection
@@ -9455,22 +9455,22 @@ Would you like to save the file with a different name?
StdTreeSingleDocument
Only display the active document in the tree view
- Only display the active document in the tree view
+ Afișează doar documentul activ în vizualizarea arborescentă
TreeView
- TreeView
+ Vizualizare arborescentă
Single document
- Single document
+ Document unic
StdTreeSyncPlacement
TreeView
- TreeView
+ Vizualizare arborescentă
Sync placement
@@ -9485,7 +9485,7 @@ Would you like to save the file with a different name?
StdTreeSyncSelection
TreeView
- TreeView
+ Vizualizare arborescentă
Sync selection
@@ -9493,18 +9493,18 @@ Would you like to save the file with a different name?
Auto expand tree item when the corresponding object is selected in 3D view
- Auto expand tree item when the corresponding object is selected in 3D view
+ Extinde automat vederea arborescentă atunci când obiectul corespunzător este selectat în vizualizarea 3D
StdTreeSyncView
TreeView
- TreeView
+ Vizualizare arborescentă
Sync view
- Sync view
+ Sincronizarea vizualizării
Auto switch to the 3D view containing the selected item
@@ -9626,9 +9626,9 @@ Would you like to save the file with a different name?
Are you sure you want to continue?
- The following referencing objects might break.
+ Următoarele obiecte preferențiate s-ar putea distruge.
-Are you sure you want to continue?
+Sunteți sigur că doriți să continuați?
@@ -9637,7 +9637,7 @@ Are you sure you want to continue?
These items are selected for deletion, but are not in the active document.
- These items are selected for deletion, but are not in the active document.
+ Aceste elemente sunt selectate pentru ștergere, dar nu sunt în documentul activ.
@@ -9715,8 +9715,8 @@ Are you sure you want to continue?
To link to external objects, the document must be saved at least once.
Do you want to save the document now?
- To link to external objects, the document must be saved at least once.
-Do you want to save the document now?
+ Pentru face legăturile la obiecte externe, documentul trebuie salvat cel puțin o dată.
+Doriți să salvați documentul acum?
@@ -9762,18 +9762,18 @@ Do you still want to proceed?
Set NaviCube to Isometric mode
- Set NaviCube to Isometric mode
+ Setează NaviCube în modul Izometric
ViewOrthographicCmd
Orthographic
- Orthographic
+ Ortografic
Set View to Orthographic mode
- Set View to Orthographic mode
+ Setează vizualizarea în modul ortografic
diff --git a/src/Gui/Language/FreeCAD_sl.qm b/src/Gui/Language/FreeCAD_sl.qm
index 8cddb23c29..bfda85edef 100644
Binary files a/src/Gui/Language/FreeCAD_sl.qm and b/src/Gui/Language/FreeCAD_sl.qm differ
diff --git a/src/Gui/Language/FreeCAD_sl.ts b/src/Gui/Language/FreeCAD_sl.ts
index 2215670d0c..709d64525d 100644
--- a/src/Gui/Language/FreeCAD_sl.ts
+++ b/src/Gui/Language/FreeCAD_sl.ts
@@ -299,7 +299,7 @@
ExpressionLabel
Enter an expression...
- Vnesite izraz ...
+ Vnesite izraz ...
Expression:
@@ -1669,7 +1669,7 @@ ukazni mizi, se prelomijo
Addons...
- Dodatki ...
+ Dodatki ...
Toolbar
@@ -1955,7 +1955,7 @@ Navedite drugo mapo.
Find...
- Poišči ...
+ Poišči ...
Sorted
@@ -4100,7 +4100,7 @@ Prednostni je sistem, nastavljen v splošnih prednastavitvah.
Cleanup...
- Počisti ...
+ Počisti ...
Delete
@@ -5469,7 +5469,7 @@ Kako želite nadaljevati?
Expression...
- Izraz ...
+ Izraz ...
Auto expand
@@ -5540,7 +5540,7 @@ Ali želite končati ne da bi shranili podatke?
Insert file name...
- Vstavite ime datoteke ...
+ Vstavite ime datoteke ...
Save History
@@ -6154,7 +6154,7 @@ Ali želite navesti drugo mapo?
Search...
- Iskanje ...
+ Iskanje ...
Search for objects
@@ -6278,7 +6278,7 @@ Ali želite navesti drugo mapo?
Preferences...
- Prednastavitve ...
+ Prednastavitve ...
Quit %1
@@ -6477,7 +6477,7 @@ Ali želite navesti drugo mapo?
Printing...
- Tiskanje ...
+ Tiskanje ...
Cannot load workbench
@@ -6659,7 +6659,7 @@ Odprite brskalnik in vtipkajte: http://localhost:%1.
Options...
- Možnosti ...
+ Možnosti ...
Out of memory
@@ -6973,7 +6973,7 @@ Izberite "Prekini" za prekinitev
Override colors...
- Povozi barve ...
+ Povozi barve ...
Identical physical path detected. It may cause unwanted overwrite of existing document!
@@ -6993,7 +6993,7 @@ Izberite "Prekini" za prekinitev
Please check report view for more...
-Za več informacij poglejte poročevalni pogled ...
+Za več informacij poglejte poročevalni pogled ...
@@ -7356,7 +7356,7 @@ Ali želite datoteko shraniti z drugačnim imenom?
StdCmdDlgMacroExecute
Macros ...
- Makri …
+ Makri ...
Opens a dialog to let you execute a recorded macro
@@ -7386,7 +7386,7 @@ Ali želite datoteko shraniti z drugačnim imenom?
StdCmdDlgMacroRecord
&Macro recording ...
- &Snemanje makra …
+ &Snemanje makra ...
Opens a dialog to record a macro
@@ -7405,7 +7405,7 @@ Ali želite datoteko shraniti z drugačnim imenom?
E&dit parameters ...
- &Uredi določilke …
+ &Uredi določilke ...
Opens a Dialog to edit the parameters
@@ -7420,7 +7420,7 @@ Ali želite datoteko shraniti z drugačnim imenom?
&Preferences ...
- &Prednastavitve …
+ &Prednastavitve ...
Opens a Dialog to edit the preferences
@@ -7909,7 +7909,7 @@ Ali želite datoteko shraniti z drugačnim imenom?
Attach to remote debugger...
- Priloži k oddaljenemu razhroščevalniku ...
+ Priloži k oddaljenemu razhroščevalniku ...
Attach to a remotely running debugger
@@ -8161,7 +8161,7 @@ Ali želite datoteko shraniti z drugačnim imenom?
&Print...
- &Natisni ...
+ &Natisni ...
Print the document
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.qm
index 73b46417b5..9d349f5c66 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts
index 8b2b3ab488..69d317077a 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -122,19 +137,19 @@
Filter regular expression is invalid
-
- Click for details about package
- Click for details about package
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Click for details about workbench
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Click for details about macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -146,6 +161,11 @@
Maintainers:
Maintainers:
+
+
+ Tags
+ Tags
+
updated
@@ -176,6 +196,21 @@
Pending restart
Pending restart
+
+
+ Click for details about package
+ Click for details about package
+
+
+
+ Click for details about workbench
+ Click for details about workbench
+
+
+
+ Click for details about macro
+ Click for details about macro
+
Installed version
@@ -293,11 +328,21 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ S'està recuperant informació de
+
Failed to read metadata from
Failed to read metadata from
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -358,25 +403,15 @@
Caching macro code...
Caching macro code...
-
-
- Retrieving package metadata...
- Retrieving package metadata...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
S'està recuperant la descripció...
-
- Retrieving info from
- S'està recuperant informació de
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -498,6 +533,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Retrieving package metadata...
+
+
+
+ Failed to execute pip. Returned error was:
+ Failed to execute pip. Returned error was:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -548,11 +608,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -588,6 +643,16 @@
Updating cache...
Updating cache...
+
+
+ Checking for updates...
+ Buscant actualitzacions...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -604,20 +669,15 @@
Cal que reinicis FreeCAD per què els canvis s'efectuin. Premi Acceptar per reinciciar-lo ara, o bé, Cancel·lar per fer-ho més tard.
-
- Checking for updates...
- Buscant actualitzacions...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Aplica
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Addon Manager: Skipping update check because AutoCheck user preference is False
-
update(s)
@@ -653,6 +713,11 @@
Macro successfully removed.
S'ha eliminat la macro correctament.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+
Restart required
@@ -691,17 +756,17 @@
Cannot execute Python
- Cannot execute Python
+ No s’ha pogut executar el Python
Cannot execute pip
- Cannot execute pip
+ No s’ha pogut executar el pip
Package installation failed
- Package installation failed
+ La instal·lació del paquet ha fallat
@@ -713,6 +778,15 @@
Installation of macro failed
Installation of macro failed
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -751,7 +825,12 @@
Are you sure you want to uninstall this Addon?
- Are you sure you want to uninstall this Addon?
+ Segur que voleu desinstal·lar aquest complement?
+
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.qm
index 0534b0f9bd..a7fce3816c 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts
index 6b4fdcb3d6..4197af946d 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -124,19 +139,19 @@
Filter regular expression is invalid
-
- Click for details about package
- Click for details about package
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Click for details about workbench
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Click for details about macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -148,6 +163,11 @@
Maintainers:
Maintainers:
+
+
+ Tags
+ Tags
+
updated
@@ -178,6 +198,21 @@
Pending restart
Pending restart
+
+
+ Click for details about package
+ Click for details about package
+
+
+
+ Click for details about workbench
+ Click for details about workbench
+
+
+
+ Click for details about macro
+ Click for details about macro
+
Installed version
@@ -295,11 +330,21 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ Načítání informací z
+
Failed to read metadata from
Failed to read metadata from
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -360,25 +405,15 @@
Caching macro code...
Caching macro code...
-
-
- Retrieving package metadata...
- Retrieving package metadata...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
Načítání popisu...
-
- Retrieving info from
- Načítání informací z
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -500,6 +535,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Retrieving package metadata...
+
+
+
+ Failed to execute pip. Returned error was:
+ Failed to execute pip. Returned error was:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -550,11 +610,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -590,6 +645,16 @@
Updating cache...
Updating cache...
+
+
+ Checking for updates...
+ Hledání aktualizací...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -606,20 +671,15 @@
Aby se změny projevily, musíte FreeCAD restartovat. Stiskněte Ok pro restartování FreeCADu, nebo Zrušit pro pozdější restart.
-
- Checking for updates...
- Hledání aktualizací...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Použít
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Addon Manager: Skipping update check because AutoCheck user preference is False
-
update(s)
@@ -655,6 +715,11 @@
Macro successfully removed.
Makro bylo úspěšně odstraněno.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+
Restart required
@@ -715,6 +780,17 @@
Installation of macro failed
Installation of macro failed
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -755,6 +831,11 @@
Are you sure you want to uninstall this Addon?
Are you sure you want to uninstall this Addon?
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
Macro could not be removed.
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm
index 3edce334d5..a3a4700e1a 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts
index d14de0ea34..e2f6ff3d69 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -107,7 +122,7 @@
Delete cached version of this README and re-download
- Lösche die zwischengespeicherte Version dieses READMEs und lade sie erneut
+ Lösche die zwischengespeicherte Version dieses READMEs und lade sie erneut herunter
Delete cached version of this README and re-download
@@ -122,19 +137,19 @@
Filter regulärer Ausdruck ist ungültig
-
- Click for details about package
- Für Details zum Paket klicken
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Für Details zum Arbeitsbereich klicken
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Für Details zum Makro klicken
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -146,6 +161,11 @@
Maintainers:
Maintainer:
+
+
+ Tags
+ Tags
+
updated
@@ -176,6 +196,21 @@
Pending restart
Ausstehender Neustart
+
+
+ Click for details about package
+ Für Details zum Paket klicken
+
+
+
+ Click for details about workbench
+ Für Details zum Arbeitsbereich klicken
+
+
+
+ Click for details about macro
+ Für Details zum Makro klicken
+
Installed version
@@ -293,15 +328,25 @@
Unable to fetch git updates for workbench
Git-Updates für Workbench können nicht abgerufen werden
+
+
+ Retrieving info from
+ Informationen werden abgerufen von
+
Failed to read metadata from
Fehler beim Laden der Metadaten von
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
- git fetch failed for {wb.name}
+ git fetch fehlgeschlagen für {wb.name}
@@ -358,25 +403,15 @@
Caching macro code...
Makro-Code wird zwischengespeichert...
-
-
- Retrieving package metadata...
- Paket-Metadaten werden abgerufen...
-
-
-
- Failed to execute pip. Returned error was:
- Pip konnte nicht ausgeführt werden. Fehlermeldung war:
-
Retrieving description...
Beschreibung wird abgerufen...
-
- Retrieving info from
- Informationen werden abgerufen von
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -496,7 +531,32 @@
Error: Unable to locate ZIP from
- Error: Unable to locate ZIP from
+ Fehler: ZIP-Datei konnte nicht gefunden werden unter
+
+
+
+ Retrieving package metadata...
+ Paket-Metadaten werden abgerufen...
+
+
+
+ Failed to execute pip. Returned error was:
+ Pip konnte nicht ausgeführt werden. Fehlermeldung war:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
@@ -546,12 +606,7 @@
Missing dependency
- Missing dependency
-
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Fehlende Abhängigkeit
@@ -588,6 +643,16 @@
Updating cache...
Cache wird aktualisiert...
+
+
+ Checking for updates...
+ Nach Updates suchen...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -604,20 +669,15 @@
Sie müssen FreeCAD neu starten, um die Änderungen anzuwenden. Drücken Sie Ok, um FreeCAD jetzt neu zu starten, oder Abbrechen, um später neu zu starten.
-
- Checking for updates...
- Nach Updates suchen...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ QtNetwork konnte nicht importiert werden - siehe Berichtsansicht für Details. Der Addon Manager ist nicht verfügbar.
Apply
Übernehmen
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Programmerweiterungs-Manager: Überspringen der Aktualisierungsprüfung, weil die Benutzereinstellung AutoCheck auf „false“ gesetzt ist
-
update(s)
@@ -653,6 +713,11 @@
Macro successfully removed.
Das Makro wurde erfolgreich entfernt.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Programmerweiterungs-Manager: Überspringen der Aktualisierungsprüfung, weil die Benutzereinstellung AutoCheck auf „false“ gesetzt ist
+
Restart required
@@ -676,7 +741,7 @@
Too many to list
- Too many to list
+ Zu viel aufzulisten
@@ -691,17 +756,17 @@
Cannot execute Python
- Cannot execute Python
+ Python kann nicht ausgeführt werden
Cannot execute pip
- Cannot execute pip
+ Pip kann nicht ausgeführt werden
Package installation failed
- Package installation failed
+ Paketinstallation fehlgeschlagen
@@ -713,6 +778,15 @@
Installation of macro failed
Installation des Makros fehlgeschlagen
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -746,12 +820,17 @@
Confirm remove
- Confirm remove
+ Entfernen bestätigen
Are you sure you want to uninstall this Addon?
- Are you sure you want to uninstall this Addon?
+ Soll dieses Addon wirklich deinstalliert werden?
+
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_el.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_el.qm
index fec8f434bb..3d4c7ed528 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_el.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_el.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts
index 263b4e58cb..8a70e2040e 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -122,19 +137,19 @@
Filter regular expression is invalid
-
- Click for details about package
- Click for details about package
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Click for details about workbench
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Click for details about macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -146,6 +161,11 @@
Maintainers:
Maintainers:
+
+
+ Tags
+ Tags
+
updated
@@ -176,6 +196,21 @@
Pending restart
Pending restart
+
+
+ Click for details about package
+ Click for details about package
+
+
+
+ Click for details about workbench
+ Click for details about workbench
+
+
+
+ Click for details about macro
+ Click for details about macro
+
Installed version
@@ -293,11 +328,21 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ Ανάκτηση πληροφοριών από
+
Failed to read metadata from
Failed to read metadata from
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -358,25 +403,15 @@
Caching macro code...
Caching macro code...
-
-
- Retrieving package metadata...
- Retrieving package metadata...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
Ανάκτηση περιγραφής...
-
- Retrieving info from
- Ανάκτηση πληροφοριών από
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -498,6 +533,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Retrieving package metadata...
+
+
+
+ Failed to execute pip. Returned error was:
+ Failed to execute pip. Returned error was:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -548,11 +608,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -588,6 +643,16 @@
Updating cache...
Updating cache...
+
+
+ Checking for updates...
+ Έλεγχος για ενημερώσεις...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -604,20 +669,15 @@
Πρέπει να γίνει επανεκκίνηση του FreeCad για να εφαρμοστούν οι αλλαγές. Πατήστε Ok για να επανεκκινήσετε το FreeCAD τώρα, ή Cancel για να γίνει επανεκκίνηση αργότερα.
-
- Checking for updates...
- Έλεγχος για ενημερώσεις...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Εφαρμογή
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Addon Manager: Skipping update check because AutoCheck user preference is False
-
update(s)
@@ -653,6 +713,11 @@
Macro successfully removed.
Η μακροεντολή αφαιρέθηκε επιτυχώς.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+
Restart required
@@ -713,6 +778,15 @@
Installation of macro failed
Installation of macro failed
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -753,6 +827,11 @@
Are you sure you want to uninstall this Addon?
Are you sure you want to uninstall this Addon?
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
Macro could not be removed.
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.qm
index 5a030813ad..998bc71636 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts
index d7d9c9ab93..cdc0bf9966 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -122,19 +137,19 @@
La expresión regular del filtro no es válida
-
- Click for details about package
- Haga clic para obtener detalles sobre el paquete
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Haga clic para obtener detalles sobre el banco de trabajo
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Haga clic para obtener detalles sobre la macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -146,6 +161,11 @@
Maintainers:
Mantenedores:
+
+
+ Tags
+ Tags
+
updated
@@ -176,6 +196,21 @@
Pending restart
Reinicio pendiente
+
+
+ Click for details about package
+ Haga clic para obtener detalles sobre el paquete
+
+
+
+ Click for details about workbench
+ Haga clic para obtener detalles sobre el banco de trabajo
+
+
+
+ Click for details about macro
+ Haga clic para obtener detalles sobre la macro
+
Installed version
@@ -219,7 +254,7 @@
Preference Packs
- Paquetes de preferencias
+ Paquetes preferidos
@@ -293,11 +328,21 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ Recuperando información de
+
Failed to read metadata from
Error al leer los metadatos de
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -358,25 +403,15 @@
Caching macro code...
Código macro en caché...
-
-
- Retrieving package metadata...
- Recuperando metadatos del paquete...
-
-
-
- Failed to execute pip. Returned error was:
- Error al ejecutar pip. El error retornado fue:
-
Retrieving description...
Recuperando descripción...
-
- Retrieving info from
- Recuperando información de
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -498,6 +533,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Recuperando metadatos del paquete...
+
+
+
+ Failed to execute pip. Returned error was:
+ Error al ejecutar pip. El error retornado fue:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -548,11 +608,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -588,6 +643,16 @@
Updating cache...
Actualizando caché...
+
+
+ Checking for updates...
+ Buscando actualizaciones...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -604,20 +669,15 @@
Debe reiniciar FreeCAD para que los cambios surtan efecto. Presione Aceptar para reiniciar FreeCAD ahora, o Cancelar para reiniciar más tarde.
-
- Checking for updates...
- Buscando actualizaciones...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Aplicar
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Administrador de complementos: Omitiendo comprobación de actualización porque la preferencia de usuario es False
-
update(s)
@@ -653,6 +713,11 @@
Macro successfully removed.
Macro eliminada correctamente.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Administrador de complementos: Omitiendo comprobación de actualización porque la preferencia de usuario es False
+
Restart required
@@ -713,6 +778,15 @@
Installation of macro failed
La instalación de macro ha fallado
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -753,6 +827,11 @@
Are you sure you want to uninstall this Addon?
Are you sure you want to uninstall this Addon?
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
Macro could not be removed.
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.qm
index 00d93c2e33..429bba9645 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts
index f74b459b70..01997299d2 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -122,19 +137,19 @@
La expresión regular del filtro no es válida
-
- Click for details about package
- Haga clic para obtener detalles sobre el paquete
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Haga clic para obtener detalles sobre el banco de trabajo
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Haga clic para obtener detalles sobre la macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -146,6 +161,11 @@
Maintainers:
Mantenedores:
+
+
+ Tags
+ Tags
+
updated
@@ -176,6 +196,21 @@
Pending restart
Reinicio pendiente
+
+
+ Click for details about package
+ Haga clic para obtener detalles sobre el paquete
+
+
+
+ Click for details about workbench
+ Haga clic para obtener detalles sobre el banco de trabajo
+
+
+
+ Click for details about macro
+ Haga clic para obtener detalles sobre la macro
+
Installed version
@@ -293,11 +328,21 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ Recuperando información de
+
Failed to read metadata from
Error al leer los metadatos de
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -358,25 +403,15 @@
Caching macro code...
Caching macro code...
-
-
- Retrieving package metadata...
- Recuperando metadatos del paquete...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
Recuperando la descripción...
-
- Retrieving info from
- Recuperando información de
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -498,6 +533,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Recuperando metadatos del paquete...
+
+
+
+ Failed to execute pip. Returned error was:
+ Failed to execute pip. Returned error was:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -548,11 +608,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -588,6 +643,16 @@
Updating cache...
Actualizando caché...
+
+
+ Checking for updates...
+ Buscando actualizaciones...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -604,20 +669,15 @@
Debe reiniciar FreeCAD para que los cambios surtan efecto. Pulse Ok para reiniciar FreeCAD ahora, o Cancelar para reiniciar más tarde.
-
- Checking for updates...
- Buscando actualizaciones...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Aplicar
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Administrador de complementos: Omitiendo comprobación de actualización porque la preferencia de usuario es False
-
update(s)
@@ -653,6 +713,11 @@
Macro successfully removed.
Macro eliminado correctamente.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Administrador de complementos: Omitiendo comprobación de actualización porque la preferencia de usuario es False
+
Restart required
@@ -713,6 +778,15 @@
Installation of macro failed
La instalación de macro ha fallado
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -753,6 +827,11 @@
Are you sure you want to uninstall this Addon?
Are you sure you want to uninstall this Addon?
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
Macro could not be removed.
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.qm
index 7d4e38edb3..c96bf1a667 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts
index 0e49308d6e..3a37bae8a3 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -122,19 +137,19 @@
Iragazkiaren adierazpen erregularra baliogabea da
-
- Click for details about package
- Egin klik paketearen xehetasunak eskuratzeko
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Egin klik lan-mahaiaren xehetasunak eskuratzeko
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Egin klik makroaren xehetasunak eskuratzeko
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -146,6 +161,11 @@
Maintainers:
Mantentzaileak:
+
+
+ Tags
+ Tags
+
updated
@@ -176,6 +196,21 @@
Pending restart
Berrabioaren zain
+
+
+ Click for details about package
+ Egin klik paketearen xehetasunak eskuratzeko
+
+
+
+ Click for details about workbench
+ Egin klik lan-mahaiaren xehetasunak eskuratzeko
+
+
+
+ Click for details about macro
+ Egin klik makroaren xehetasunak eskuratzeko
+
Installed version
@@ -293,11 +328,21 @@
Unable to fetch git updates for workbench
Ezin izan dira lan-mahairako git eguneraketak atzitu
+
+
+ Retrieving info from
+ Informazioa berreskuratzen hemendik
+
Failed to read metadata from
Huts egin du hemengo metadatuen irakurketak:
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -358,25 +403,15 @@
Caching macro code...
Caching macro code...
-
-
- Retrieving package metadata...
- Pakete-metadatuak atzitzen...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
Deskribapena atzitzen...
-
- Retrieving info from
- Informazioa berreskuratzen hemendik
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -498,6 +533,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Pakete-metadatuak atzitzen...
+
+
+
+ Failed to execute pip. Returned error was:
+ Failed to execute pip. Returned error was:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -548,11 +608,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -588,6 +643,16 @@
Updating cache...
Updating cache...
+
+
+ Checking for updates...
+ Eguneraketak bilatzen...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -604,20 +669,15 @@
FreeCAD berrabiarazi behar da aldaketak indarrean sartu daitezen. Sakatu 'Ados' FreeCAD orain berrabiarazteko edo 'Utzi' geroago berrabiarazteko.
-
- Checking for updates...
- Eguneraketak bilatzen...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Aplikatu
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Gehigarrien kudeatzailea: Eguneraketaren egiaztapena saltatu da 'AutoCheck' erabiltzaile-hobespena faltsua delako
-
update(s)
@@ -653,6 +713,11 @@
Macro successfully removed.
Makroa ongi kendu da.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Gehigarrien kudeatzailea: Eguneraketaren egiaztapena saltatu da 'AutoCheck' erabiltzaile-hobespena faltsua delako
+
Restart required
@@ -713,6 +778,15 @@
Installation of macro failed
Makroaren instalazioak huts egin du
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -753,6 +827,11 @@
Are you sure you want to uninstall this Addon?
Are you sure you want to uninstall this Addon?
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
Macro could not be removed.
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.qm
index 95fb855619..c571ed6754 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts
index aab3c44a58..a9ef286469 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -122,19 +137,19 @@
Filter regular expression is invalid
-
- Click for details about package
- Click for details about package
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Click for details about workbench
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Click for details about macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -146,6 +161,11 @@
Maintainers:
Maintainers:
+
+
+ Tags
+ Tags
+
updated
@@ -176,6 +196,21 @@
Pending restart
Pending restart
+
+
+ Click for details about package
+ Click for details about package
+
+
+
+ Click for details about workbench
+ Click for details about workbench
+
+
+
+ Click for details about macro
+ Click for details about macro
+
Installed version
@@ -293,11 +328,21 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ Haetaan tietoja
+
Failed to read metadata from
Failed to read metadata from
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -358,25 +403,15 @@
Caching macro code...
Caching macro code...
-
-
- Retrieving package metadata...
- Retrieving package metadata...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
Haetaan kuvausta...
-
- Retrieving info from
- Haetaan tietoja
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -496,7 +531,32 @@
Error: Unable to locate ZIP from
- Error: Unable to locate ZIP from
+ Virhe: Zip-lähdetiedostoa ei voitu paikantaa
+
+
+
+ Retrieving package metadata...
+ Retrieving package metadata...
+
+
+
+ Failed to execute pip. Returned error was:
+ Failed to execute pip. Returned error was:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
@@ -546,12 +606,7 @@
Missing dependency
- Missing dependency
-
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Puuttuva riippuvuus
@@ -588,6 +643,16 @@
Updating cache...
Updating cache...
+
+
+ Checking for updates...
+ Tarkistetaan päivityksiä...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -604,20 +669,15 @@
Sinun on käynnistettävä FreeCAD uudelleen, jotta muutokset tulevat voimaan. Paina Ok käynnistäksesi FreeCAD nyt, tai Peruuta käynnistääksesi myöhemmin uudelleen.
-
- Checking for updates...
- Tarkistetaan päivityksiä...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Käytä
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Addon Manager: Skipping update check because AutoCheck user preference is False
-
update(s)
@@ -653,6 +713,11 @@
Macro successfully removed.
Makro poistettu onnistuneesti.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+
Restart required
@@ -676,7 +741,7 @@
Too many to list
- Too many to list
+ Liian monta listattavaksi
@@ -701,7 +766,7 @@
Package installation failed
- Package installation failed
+ Paketin asennus epäonnistui
@@ -713,6 +778,15 @@
Installation of macro failed
Installation of macro failed
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -746,12 +820,17 @@
Confirm remove
- Confirm remove
+ Vahvista poisto
Are you sure you want to uninstall this Addon?
- Are you sure you want to uninstall this Addon?
+ Haluatko varmasti poistaa lisäosan?
+
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fil.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_fil.qm
index 944fa7e460..0f15ca3c30 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_fil.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_fil.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts
index ea78509299..862fd18c05 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -122,19 +137,19 @@
Filter regular expression is invalid
-
- Click for details about package
- Click for details about package
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Click for details about workbench
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Click for details about macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -146,6 +161,11 @@
Maintainers:
Maintainers:
+
+
+ Tags
+ Tags
+
updated
@@ -176,6 +196,21 @@
Pending restart
Pending restart
+
+
+ Click for details about package
+ Click for details about package
+
+
+
+ Click for details about workbench
+ Click for details about workbench
+
+
+
+ Click for details about macro
+ Click for details about macro
+
Installed version
@@ -293,11 +328,21 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ Retrieving info from
+
Failed to read metadata from
Failed to read metadata from
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -358,25 +403,15 @@
Caching macro code...
Caching macro code...
-
-
- Retrieving package metadata...
- Retrieving package metadata...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
Retrieving description...
-
- Retrieving info from
- Retrieving info from
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -498,6 +533,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Retrieving package metadata...
+
+
+
+ Failed to execute pip. Returned error was:
+ Failed to execute pip. Returned error was:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -548,11 +608,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -588,6 +643,16 @@
Updating cache...
Updating cache...
+
+
+ Checking for updates...
+ Checking for updates...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -604,20 +669,15 @@
You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later.
-
- Checking for updates...
- Checking for updates...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Apply
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Addon Manager: Skipping update check because AutoCheck user preference is False
-
update(s)
@@ -653,6 +713,11 @@
Macro successfully removed.
Macro successfully removed.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+
Restart required
@@ -713,6 +778,15 @@
Installation of macro failed
Installation of macro failed
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -753,6 +827,11 @@
Are you sure you want to uninstall this Addon?
Are you sure you want to uninstall this Addon?
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
Macro could not be removed.
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm
index 926ded85dc..994f6f68dc 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts
index e60580037a..2cccbd2a0d 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -122,19 +137,19 @@
L’expression rationnelle du filtre n’est pas valable
-
- Click for details about package
- Cliquer pour plus de détails sur le paquet
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Cliquer pour plus de détails sur l'atelier
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Cliquer pour plus de détails sur la macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -146,6 +161,11 @@
Maintainers:
Mainteneurs :
+
+
+ Tags
+ Tags
+
updated
@@ -176,6 +196,21 @@
Pending restart
En attente de redémarrage
+
+
+ Click for details about package
+ Cliquer pour plus de détails sur le paquet
+
+
+
+ Click for details about workbench
+ Cliquer pour plus de détails sur l'atelier
+
+
+
+ Click for details about macro
+ Cliquer pour plus de détails sur la macro
+
Installed version
@@ -293,15 +328,25 @@
Unable to fetch git updates for workbench
Impossible de récupérer les mises à jour git pour l'atelier
+
+
+ Retrieving info from
+ Récupération des informations de
+
Failed to read metadata from
Impossible de lire les métadonnées depuis
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
- git fetch failed for {wb.name}
+ La récupération de git a échoué pour {wb.name}
@@ -358,25 +403,15 @@
Caching macro code...
Mise en cache du code de la macro...
-
-
- Retrieving package metadata...
- Récupération des métadonnées du paquet...
-
-
-
- Failed to execute pip. Returned error was:
- Impossible d'exécuter pip. L'erreur retournée était :
-
Retrieving description...
Récupération de la description...
-
- Retrieving info from
- Récupération des informations de
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -496,7 +531,32 @@
Error: Unable to locate ZIP from
- Error: Unable to locate ZIP from
+ Erreur: Impossible de localiser le ZIP depuis
+
+
+
+ Retrieving package metadata...
+ Récupération des métadonnées du paquet...
+
+
+
+ Failed to execute pip. Returned error was:
+ Impossible d'exécuter pip. L'erreur retournée était :
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
@@ -546,12 +606,7 @@
Missing dependency
- Missing dependency
-
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Dépendances manquantes
@@ -588,6 +643,16 @@
Updating cache...
Mise à jour du cache...
+
+
+ Checking for updates...
+ Recherche de mises à jour...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -604,20 +669,15 @@
Vous devez redémarrer FreeCAD pour que les changements prennent effet. Appuyez sur Ok pour redémarrer FreeCAD maintenant, ou Annuler pour redémarrer plus tard.
-
- Checking for updates...
- Recherche de mises à jour...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Impossible d'importer QtNetwork -- Voir la vue rapport pour plus de détails. Addon Manager indisponible.
Apply
Appliquer
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Gestionnaire d'extensions : Ignorer la vérification de mise à jour parce que la préférence de l'utilisateur est Fausse
-
update(s)
@@ -653,6 +713,11 @@
Macro successfully removed.
Macro désinstallée avec succès.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Gestionnaire d'extensions : Ignorer la vérification de mise à jour parce que la préférence de l'utilisateur est Fausse
+
Restart required
@@ -676,7 +741,7 @@
Too many to list
- Too many to list
+ Trop de valeurs à afficher
@@ -691,28 +756,37 @@
Cannot execute Python
- Cannot execute Python
+ Impossible d'exécuter Python
Cannot execute pip
- Cannot execute pip
+ Impossible d'exécuter pip
Package installation failed
- Package installation failed
+ L'installation du paquet a échoué
See Report View for detailed failure log.
- See Report View for detailed failure log.
+ Reportez-vous à la vue rapport pour plus de détails sur les échecs.
Installation of macro failed
L'installation de la macro a échoué
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -746,12 +820,17 @@
Confirm remove
- Confirm remove
+ Confirmer la suppression
Are you sure you want to uninstall this Addon?
- Are you sure you want to uninstall this Addon?
+ Etes vous sur de désinstaller ce module?
+
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.qm
index 94f1b17b6d..f0912b2df9 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts
index 64a8c63eb2..84d44f5ab0 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -122,19 +137,19 @@
Filter regular expression is invalid
-
- Click for details about package
- Click for details about package
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Click for details about workbench
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Click for details about macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -146,6 +161,11 @@
Maintainers:
Maintainers:
+
+
+ Tags
+ Tags
+
updated
@@ -176,6 +196,21 @@
Pending restart
Pending restart
+
+
+ Click for details about package
+ Click for details about package
+
+
+
+ Click for details about workbench
+ Click for details about workbench
+
+
+
+ Click for details about macro
+ Click for details about macro
+
Installed version
@@ -293,11 +328,21 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ Recuperando información dende
+
Failed to read metadata from
Failed to read metadata from
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -358,25 +403,15 @@
Caching macro code...
Caching macro code...
-
-
- Retrieving package metadata...
- Retrieving package metadata...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
Recuperando descrición...
-
- Retrieving info from
- Recuperando información dende
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -498,6 +533,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Retrieving package metadata...
+
+
+
+ Failed to execute pip. Returned error was:
+ Failed to execute pip. Returned error was:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -548,11 +608,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -588,6 +643,16 @@
Updating cache...
Updating cache...
+
+
+ Checking for updates...
+ Comprobando actualizacións...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -604,20 +669,15 @@
Tes que reiniciar FreeCAD para que os trocos teñan efecto. Preme Ok para reiniciar FreeCAD agora, ou Cancelar para reiniciar despois.
-
- Checking for updates...
- Comprobando actualizacións...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Aplicar
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Addon Manager: Skipping update check because AutoCheck user preference is False
-
update(s)
@@ -653,6 +713,11 @@
Macro successfully removed.
Eliminouse a macro correctamente.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+
Restart required
@@ -713,6 +778,15 @@
Installation of macro failed
Installation of macro failed
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -753,6 +827,11 @@
Are you sure you want to uninstall this Addon?
Are you sure you want to uninstall this Addon?
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
Macro could not be removed.
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.qm
index 1645efee5f..7ae62a03a6 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts
index 44a5a04125..20595cd94b 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -125,19 +140,19 @@
Regularni izraz filtra nije važeći
-
- Click for details about package
- Kliknite za detalje o paketu
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Kliknite za detalje o radnoj površini
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Kliknite za detalje o makro naredbama
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -149,6 +164,11 @@
Maintainers:
Održavatelji:
+
+
+ Tags
+ Tags
+
updated
@@ -179,6 +199,21 @@
Pending restart
Na čekanju ponovnog pokretanja
+
+
+ Click for details about package
+ Kliknite za detalje o paketu
+
+
+
+ Click for details about workbench
+ Kliknite za detalje o radnoj površini
+
+
+
+ Click for details about macro
+ Kliknite za detalje o makro naredbama
+
Installed version
@@ -295,11 +330,21 @@
Unable to fetch git updates for workbench
Nije moguće dohvatiti git ažuriranja za radnu površinu
+
+
+ Retrieving info from
+ Dohvaćanje informacije od
+
Failed to read metadata from
Čitanje metapodataka iz nije uspjelo
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -362,25 +407,15 @@
Caching macro code...
Osvježavanje predmemorije koda makronaredbe...
-
-
- Retrieving package metadata...
- Dohvaćanje metapodataka paketa...
-
-
-
- Failed to execute pip. Returned error was:
- Izvršenje pip-a nije uspjelo. Vraćena pogreška je bila:
-
Retrieving description...
Dohvaćanje opisa...
-
- Retrieving info from
- Dohvaćanje informacije od
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -506,6 +541,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Dohvaćanje metapodataka paketa...
+
+
+
+ Failed to execute pip. Returned error was:
+ Izvršenje pip-a nije uspjelo. Vraćena pogreška je bila:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -556,11 +616,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -596,6 +651,16 @@
Updating cache...
Ažuriram cache…
+
+
+ Checking for updates...
+ Provjeri ima li ažuriranja...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -612,20 +677,15 @@
Morate ponovo pokrenuti FreeCAD da bi promjene stupile na snagu. Pritisnite OK za ponovno pokretanje programa FreeCAD sada ili Odustani za kasnije ponovno pokretanje.
-
- Checking for updates...
- Provjeri ima li ažuriranja...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Primijeni
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Upravitelj dodataka: preskakanje provjere ažuriranja jer je korisnička postavka AutoCheck lažna
-
update(s)
@@ -661,6 +721,11 @@
Macro successfully removed.
Makro je uspješno uklonjen.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Upravitelj dodataka: preskakanje provjere ažuriranja jer je korisnička postavka AutoCheck lažna
+
Restart required
@@ -721,6 +786,16 @@
Installation of macro failed
Instalacija makro naredbe nije uspjela.
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -761,6 +836,11 @@
Are you sure you want to uninstall this Addon?
Are you sure you want to uninstall this Addon?
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
Macro could not be removed.
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.qm
index 5021bed336..bbed1c5370 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts
index bde646c36c..df74b24f79 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -122,19 +137,19 @@
A szűrő alapértelmezett kifejezése érvénytelen
-
- Click for details about package
- Kattintson a csomag részleteiért
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Kattintson a munkafelület részleteiért
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Kattintson a makró részleteiért
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -146,6 +161,11 @@
Maintainers:
Közreműködők:
+
+
+ Tags
+ Tags
+
updated
@@ -176,6 +196,21 @@
Pending restart
Újraindításra várva
+
+
+ Click for details about package
+ Kattintson a csomag részleteiért
+
+
+
+ Click for details about workbench
+ Kattintson a munkafelület részleteiért
+
+
+
+ Click for details about macro
+ Kattintson a makró részleteiért
+
Installed version
@@ -293,11 +328,21 @@
Unable to fetch git updates for workbench
Nem lehet letölteni a git-frissítéseket a munkafelületekhez
+
+
+ Retrieving info from
+ Információ beolvasása ettől
+
Failed to read metadata from
Nem sikerült beolvasni a metaadatokat innen
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -358,25 +403,15 @@
Caching macro code...
Makro kód ellenörzése...
-
-
- Retrieving package metadata...
- A csomag metaadatainak lekérése...
-
-
-
- Failed to execute pip. Returned error was:
- A kép a képben végrehajtás sikertelen volt. Hiba történt:
-
Retrieving description...
Leírások lekérdezése...
-
- Retrieving info from
- Információ beolvasása ettől
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -498,6 +533,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ A csomag metaadatainak lekérése...
+
+
+
+ Failed to execute pip. Returned error was:
+ A kép a képben végrehajtás sikertelen volt. Hiba történt:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -548,11 +608,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -588,6 +643,16 @@
Updating cache...
Gyorsítótár frissítése...
+
+
+ Checking for updates...
+ Frissítés keresése...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -604,20 +669,15 @@
A módosítások érvénybe léptetéséhez újra kell indítania a FreeCAD programot. A FreeCAD újraindításához nyomja meg az Ok gombot, vagy a Mégse gombra indítsa újra később.
-
- Checking for updates...
- Frissítés keresése...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Alkalmaz
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Bővítménykezelő: Kihagyom a frissítések keresését, mert az Automatikus ellenőrzés felhasználói beállítás Hamis értékre van állítva
-
update(s)
@@ -653,6 +713,11 @@
Macro successfully removed.
Makró sikeresen törölve.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Bővítménykezelő: Kihagyom a frissítések keresését, mert az Automatikus ellenőrzés felhasználói beállítás Hamis értékre van állítva
+
Restart required
@@ -713,6 +778,15 @@
Installation of macro failed
A makró telepítése sikertelen
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -753,6 +827,11 @@
Are you sure you want to uninstall this Addon?
Are you sure you want to uninstall this Addon?
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
Macro could not be removed.
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_id.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_id.qm
index a4be472efb..dfc5b5c85c 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_id.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_id.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts
index 34b03dcbcb..c4db2069ab 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -121,19 +136,19 @@
Filter regular expression is invalid
-
- Click for details about package
- Click for details about package
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Click for details about workbench
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Click for details about macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -145,6 +160,11 @@
Maintainers:
Maintainers:
+
+
+ Tags
+ Tags
+
updated
@@ -175,6 +195,21 @@
Pending restart
Pending restart
+
+
+ Click for details about package
+ Click for details about package
+
+
+
+ Click for details about workbench
+ Click for details about workbench
+
+
+
+ Click for details about macro
+ Click for details about macro
+
Installed version
@@ -292,11 +327,21 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ Mengambil info dari
+
Failed to read metadata from
Failed to read metadata from
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -357,25 +402,15 @@
Caching macro code...
Caching macro code...
-
-
- Retrieving package metadata...
- Retrieving package metadata...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
Mengambil deskripsi...
-
- Retrieving info from
- Mengambil info dari
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -497,6 +532,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Retrieving package metadata...
+
+
+
+ Failed to execute pip. Returned error was:
+ Failed to execute pip. Returned error was:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -547,11 +607,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -587,6 +642,16 @@
Updating cache...
Updating cache...
+
+
+ Checking for updates...
+ Memeriksa pembaruan...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -603,20 +668,15 @@
Anda harus memulai ulang FreeCAD agar perubahan diterapkan. Tekan OK untuk memulai kembali FreeCAD sekarang atau Batal untuk memulai kembali nanti.
-
- Checking for updates...
- Memeriksa pembaruan...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Apply
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Addon Manager: Skipping update check because AutoCheck user preference is False
-
update(s)
@@ -652,6 +712,11 @@
Macro successfully removed.
Makro berhasil di hapus
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+
Restart required
@@ -712,6 +777,14 @@
Installation of macro failed
Installation of macro failed
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+
+
Succeeded
@@ -752,6 +825,11 @@
Are you sure you want to uninstall this Addon?
Are you sure you want to uninstall this Addon?
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
Macro could not be removed.
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_it.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_it.qm
index 19aa16bfdf..b3e607a1c4 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_it.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_it.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts
index 04ed79dd0c..176580b32b 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -122,19 +137,19 @@
Filter regular expression is invalid
-
- Click for details about package
- Click for details about package
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Click for details about workbench
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Click for details about macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -146,6 +161,11 @@
Maintainers:
Maintainers:
+
+
+ Tags
+ Tags
+
updated
@@ -176,6 +196,21 @@
Pending restart
Pending restart
+
+
+ Click for details about package
+ Click for details about package
+
+
+
+ Click for details about workbench
+ Click for details about workbench
+
+
+
+ Click for details about macro
+ Click for details about macro
+
Installed version
@@ -293,15 +328,25 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ Recupero informazioni da
+
Failed to read metadata from
Failed to read metadata from
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
- git fetch failed for {wb.name}
+ git fetch fallito per {wb.name}
@@ -358,25 +403,15 @@
Caching macro code...
Caching macro code...
-
-
- Retrieving package metadata...
- Retrieving package metadata...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
Recupero descrizione...
-
- Retrieving info from
- Recupero informazioni da
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -496,7 +531,32 @@
Error: Unable to locate ZIP from
- Error: Unable to locate ZIP from
+ Errore: Impossibile individuare zip da
+
+
+
+ Retrieving package metadata...
+ Retrieving package metadata...
+
+
+
+ Failed to execute pip. Returned error was:
+ Failed to execute pip. Returned error was:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
@@ -546,12 +606,7 @@
Missing dependency
- Missing dependency
-
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Prerequisiti mancanti
@@ -588,6 +643,16 @@
Updating cache...
Updating cache...
+
+
+ Checking for updates...
+ Controllo aggiornamenti...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -604,20 +669,15 @@
Per rendere effettive le modifiche è necessario riavviare FreeCAD. Premere Ok per riavviare FreeCAD ora, o Annulla per riavviare più tardi.
-
- Checking for updates...
- Controllo aggiornamenti...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Impossibile importare QtNetwork -- vedere Report View per i dettagli. Addon Manager non disponibile.
Apply
Applica
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Addon Manager: Skipping update check because AutoCheck user preference is False
-
update(s)
@@ -653,6 +713,11 @@
Macro successfully removed.
Macro rimossa con successo.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+
Restart required
@@ -676,7 +741,7 @@
Too many to list
- Too many to list
+ Troppi da elencare
@@ -691,28 +756,37 @@
Cannot execute Python
- Cannot execute Python
+ Impossibile eseguire Python
Cannot execute pip
- Cannot execute pip
+ Impossibile eseguire pip
Package installation failed
- Package installation failed
+ Installazione del pacchetto fallita
See Report View for detailed failure log.
- See Report View for detailed failure log.
+ Vedere Report View per il registro di errore dettagliato.
Installation of macro failed
Installation of macro failed
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -746,12 +820,17 @@
Confirm remove
- Confirm remove
+ Conferma rimozione
Are you sure you want to uninstall this Addon?
- Are you sure you want to uninstall this Addon?
+ Sei sicuro di voler disinstallare questo Addon?
+
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.qm
index bf6f5c4c4f..f7827aaeeb 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts
index 1cd2d5610f..cb6eda08e5 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -121,19 +136,19 @@
Filter regular expression is invalid
-
- Click for details about package
- Click for details about package
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Click for details about workbench
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Click for details about macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -145,6 +160,11 @@
Maintainers:
Maintainers:
+
+
+ Tags
+ Tags
+
updated
@@ -175,6 +195,21 @@
Pending restart
Pending restart
+
+
+ Click for details about package
+ Click for details about package
+
+
+
+ Click for details about workbench
+ Click for details about workbench
+
+
+
+ Click for details about macro
+ Click for details about macro
+
Installed version
@@ -292,11 +327,21 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ 情報を取り込み中
+
Failed to read metadata from
Failed to read metadata from
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -357,25 +402,15 @@
Caching macro code...
Caching macro code...
-
-
- Retrieving package metadata...
- Retrieving package metadata...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
説明の取り込み中
-
- Retrieving info from
- 情報を取り込み中
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -497,6 +532,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Retrieving package metadata...
+
+
+
+ Failed to execute pip. Returned error was:
+ Failed to execute pip. Returned error was:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -547,11 +607,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -587,6 +642,16 @@
Updating cache...
Updating cache...
+
+
+ Checking for updates...
+ アップデートを確認中…
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -603,20 +668,15 @@
変更を反映するにはFreeCADを再起動する必要があります。今すぐFreeCADを再起動する場合はOKを、後で再起動する場合はキャンセルを押してください。
-
- Checking for updates...
- アップデートを確認中…
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
適用する
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Addon Manager: Skipping update check because AutoCheck user preference is False
-
update(s)
@@ -652,6 +712,11 @@
Macro successfully removed.
マクロを削除しました
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+
Restart required
@@ -712,6 +777,14 @@
Installation of macro failed
Installation of macro failed
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+
+
Succeeded
@@ -752,6 +825,11 @@
Are you sure you want to uninstall this Addon?
Are you sure you want to uninstall this Addon?
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
Macro could not be removed.
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ka.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ka.qm
index 61cf452e18..77810a3f6e 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_ka.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_ka.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ka.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ka.ts
index 46151586ed..a53ff9f929 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_ka.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ka.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -16,7 +31,7 @@
Unknown version (no package.xml file found)
- Unknown version (no package.xml file found)
+ უცნობი ვერსია (ფაილი package.xml ნაპოვნი არაა)
@@ -122,19 +137,19 @@
ფილტრის რეგულარული გამოთქმა არასწორია
-
- Click for details about package
- პაკეტის დეტალების გასაგებად დააწკაპუნეთ
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Click for details about workbench
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- მაკროს დეტალების სანახავად დააწკაპუნეთ
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -146,6 +161,11 @@
Maintainers:
პროექტის ლიდერები:
+
+
+ Tags
+ Tags
+
updated
@@ -176,6 +196,21 @@
Pending restart
რესტარტის მოლოდინი
+
+
+ Click for details about package
+ პაკეტის დეტალების გასაგებად დააწკაპუნეთ
+
+
+
+ Click for details about workbench
+ Click for details about workbench
+
+
+
+ Click for details about macro
+ მაკროს დეტალების სანახავად დააწკაპუნეთ
+
Installed version
@@ -276,12 +311,12 @@
GitPython not installed! Cannot retrieve macros from git
- GitPython not installed! Cannot retrieve macros from git
+ მოდული GitPython-ი ნაპოვნი არაა! მაკროების git-დან გადმოწერა შეუძლებელია
Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path
- Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path
+ რაღაც სჭირს Git-ით მაკროების გადმოწერას. შეიძლება საძებნ მისამართებში Git-ის გამშვები ფაილები არაა
@@ -293,15 +328,25 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ ინფორმაციის წყარო
+
Failed to read metadata from
მეტამონაცემების კითხვის შეცდომა
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
- git fetch failed for {wb.name}
+ git fetch-ის შეცდომა {wb.name}-თვის
@@ -358,25 +403,15 @@
Caching macro code...
მაკროს კოდის კეშირება...
-
-
- Retrieving package metadata...
- პაკეტის მეტამონაცემების მიღება...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
აღწერის მიღება...
-
- Retrieving info from
- ინფორმაციის წყარო
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -391,7 +426,7 @@
GitPython not found. Using standard download instead.
- GitPython not found. Using standard download instead.
+ მოდული GitPython-ი ნაპოვნი არაა. ვიყენებ გადმოწერის სტანდარტულ გზებს.
@@ -406,7 +441,7 @@
Outdated GitPython detected, consider upgrading with pip.
- Outdated GitPython detected, consider upgrading with pip.
+ ნაპოვნია GitPython-ის მოძველებული ვერსია. სცადეთ განაახლოთ pip-ით.
@@ -496,7 +531,32 @@
Error: Unable to locate ZIP from
- Error: Unable to locate ZIP from
+ Zip ფაილის პოვნის შეცდომა
+
+
+
+ Retrieving package metadata...
+ პაკეტის მეტამონაცემების მიღება...
+
+
+
+ Failed to execute pip. Returned error was:
+ Pip-ის გაშვების შეცდომა:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
@@ -546,12 +606,7 @@
Missing dependency
- Missing dependency
-
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ აკლია დამოკიდებულება
@@ -588,6 +643,16 @@
Updating cache...
კეშის განახლება...
+
+
+ Checking for updates...
+ განახლების შემოწმება...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -604,20 +669,15 @@
ცვლილებების ძალაში შესვლისთვის თქვენ უნდა გადატვირთოთ FreeCAD. დააჭირეთ Ok-ს, რომ გადატვირთოთ FreeCAD ახლა, ან გაუქმებას მოგვიანებით გადატვირთვისთვის.
-
- Checking for updates...
- განახლების შემოწმება...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
დადება
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Addon Manager: Skipping update check because AutoCheck user preference is False
-
update(s)
@@ -653,6 +713,11 @@
Macro successfully removed.
მაკრო წამარტებით წაიშალა.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+
Restart required
@@ -676,7 +741,7 @@
Too many to list
- Too many to list
+ მეტისმეტად ბევრ ელემენტს ამატებთ სიაში
@@ -691,17 +756,17 @@
Cannot execute Python
- Cannot execute Python
+ Python-ის გაშვების შეცდომა
Cannot execute pip
- Cannot execute pip
+ Pip-ის გაშვების შეცდომა
Package installation failed
- Package installation failed
+ პაკეტის დაყენების შეცდომა
@@ -713,6 +778,15 @@
Installation of macro failed
მაკროს დაყენების შეცდომა
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -746,12 +820,17 @@
Confirm remove
- Confirm remove
+ წაშლის დადასტურება
Are you sure you want to uninstall this Addon?
- Are you sure you want to uninstall this Addon?
+ დარწმუნებული ხართ, რომ გსურთ ამ გაფართოების წაშლა?
+
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
@@ -820,7 +899,7 @@
Sets configuration options for the Addon Manager
- Sets configuration options for the Addon Manager
+ დამატებების მენეჯერის კონფიგურაცია
@@ -888,12 +967,12 @@ installed addons will be checked for available updates
Automatically check for updates at start (requires GitPython)
- Automatically check for updates at start (requires GitPython)
+ გაშვებისას განახლებების ავტომატური შემოწმება (საჭიროა GitPython)
Custom repositories (one per line):
- Custom repositories (one per line):
+ ხელით მითითებული საცავები (თითო ხაზზე თითო):
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_lt.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_lt.qm
index d940c824e1..7b9c023ab7 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_lt.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_lt.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts
index 0f3a1fabf9..ad8a5c7460 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -124,19 +139,19 @@
Filter regular expression is invalid
-
- Click for details about package
- Click for details about package
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Click for details about workbench
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Click for details about macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -148,6 +163,11 @@
Maintainers:
Maintainers:
+
+
+ Tags
+ Tags
+
updated
@@ -178,6 +198,21 @@
Pending restart
Pending restart
+
+
+ Click for details about package
+ Click for details about package
+
+
+
+ Click for details about workbench
+ Click for details about workbench
+
+
+
+ Click for details about macro
+ Click for details about macro
+
Installed version
@@ -295,11 +330,21 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ Retrieving info from
+
Failed to read metadata from
Failed to read metadata from
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -360,25 +405,15 @@
Caching macro code...
Caching macro code...
-
-
- Retrieving package metadata...
- Retrieving package metadata...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
Retrieving description...
-
- Retrieving info from
- Retrieving info from
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -500,6 +535,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Retrieving package metadata...
+
+
+
+ Failed to execute pip. Returned error was:
+ Failed to execute pip. Returned error was:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -550,11 +610,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -590,6 +645,16 @@
Updating cache...
Updating cache...
+
+
+ Checking for updates...
+ Checking for updates...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -606,20 +671,15 @@
You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later.
-
- Checking for updates...
- Checking for updates...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Pritaikyti
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Addon Manager: Skipping update check because AutoCheck user preference is False
-
update(s)
@@ -655,6 +715,11 @@
Macro successfully removed.
Macro successfully removed.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+
Restart required
@@ -715,6 +780,17 @@
Installation of macro failed
Installation of macro failed
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -755,6 +831,11 @@
Are you sure you want to uninstall this Addon?
Are you sure you want to uninstall this Addon?
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
Macro could not be removed.
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.qm
index 6cfbc2f533..c1c92ba60a 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts
index a358053902..2803acb2c8 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -122,29 +137,34 @@
Filter regular expression is invalid
-
- Click for details about package
- Click for details about package
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Click for details about workbench
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Click for details about macro
+
+ Click for details about macro {}
+ Click for details about macro {}
Maintainer
- Maintainer
+ Beheerder
Maintainers:
- Maintainers:
+ Beheerders:
+
+
+
+ Tags
+ Tags
@@ -176,6 +196,21 @@
Pending restart
Pending restart
+
+
+ Click for details about package
+ Click for details about package
+
+
+
+ Click for details about workbench
+ Click for details about workbench
+
+
+
+ Click for details about macro
+ Click for details about macro
+
Installed version
@@ -293,11 +328,21 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ Informatie ophalen vanaf
+
Failed to read metadata from
Failed to read metadata from
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -358,25 +403,15 @@
Caching macro code...
Caching macro code...
-
-
- Retrieving package metadata...
- Retrieving package metadata...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
Omschrijving ophalen...
-
- Retrieving info from
- Informatie ophalen vanaf
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -498,6 +533,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Retrieving package metadata...
+
+
+
+ Failed to execute pip. Returned error was:
+ Failed to execute pip. Returned error was:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -548,11 +608,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -588,6 +643,16 @@
Updating cache...
Updating cache...
+
+
+ Checking for updates...
+ Zoeken naar updates...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -604,20 +669,15 @@
Je moet FreeCAD opnieuw starten om de wijzigingen door te voeren. Klik Ok om FreeCAD nu opnieuw te starten, of Cancel om dit later te doen.
-
- Checking for updates...
- Zoeken naar updates...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Toepassen
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Addon Manager: Skipping update check because AutoCheck user preference is False
-
update(s)
@@ -653,6 +713,11 @@
Macro successfully removed.
Macro succesvol verwijderd.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+
Restart required
@@ -713,6 +778,15 @@
Installation of macro failed
Installation of macro failed
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -753,6 +827,11 @@
Are you sure you want to uninstall this Addon?
Are you sure you want to uninstall this Addon?
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
Macro could not be removed.
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm
index 8fcc53169f..377f34aae1 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts
index 79a5e530f7..ec4e62147f 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -124,19 +139,19 @@
Wyrażenie regularne filtra jest nieprawidłowe
-
- Click for details about package
- Kliknij, aby uzyskać informacje o pakiecie
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Kliknij, aby uzyskać informacje o środowisku pracy
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Kliknij, aby uzyskać informacje o makrodefinicji
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -148,6 +163,11 @@
Maintainers:
Opiekunowie:
+
+
+ Tags
+ Tags
+
updated
@@ -178,6 +198,21 @@
Pending restart
Oczekuje na ponowne uruchomienie
+
+
+ Click for details about package
+ Kliknij, aby uzyskać informacje o pakiecie
+
+
+
+ Click for details about workbench
+ Kliknij, aby uzyskać informacje o środowisku pracy
+
+
+
+ Click for details about macro
+ Kliknij, aby uzyskać informacje o makrodefinicji
+
Installed version
@@ -296,15 +331,25 @@
Unable to fetch git updates for workbench
Nie można pobrać aktualizacji git dla środowiska pracy
+
+
+ Retrieving info from
+ Pobieranie informacji z
+
Failed to read metadata from
Nie udało się odczytać metadanych z
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
- git fetch failed for {wb.name}
+ pobieranie z git nie powiodło się dla {wb.name}
@@ -361,25 +406,15 @@
Caching macro code...
Pamięć podręczna makra...
-
-
- Retrieving package metadata...
- Pobieranie metadanych pakietu...
-
-
-
- Failed to execute pip. Returned error was:
- Wykonanie "obrazu w obrazie" nie powiodło się. Zwrócony błąd:
-
Retrieving description...
Pobieranie opisu...
-
- Retrieving info from
- Pobieranie informacji z
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -499,7 +534,32 @@
Error: Unable to locate ZIP from
- Error: Unable to locate ZIP from
+ Błąd: Nie można zlokalizować ZIP z
+
+
+
+ Retrieving package metadata...
+ Pobieranie metadanych pakietu...
+
+
+
+ Failed to execute pip. Returned error was:
+ Wykonanie "obrazu w obrazie" nie powiodło się. Zwrócony błąd:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
@@ -549,12 +609,7 @@
Missing dependency
- Missing dependency
-
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Brakująca zależność
@@ -591,6 +646,16 @@
Updating cache...
Aktualizowanie pamięci podręcznej ...
+
+
+ Checking for updates...
+ Sprawdzanie aktualizacji...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -607,24 +672,19 @@
Musisz zrestartować program FreeCAD, aby zmiany odniosły skutek. Naciśnij Ok, aby zrestartować FreeCAD teraz, lub Anuluj, aby zrestartować program później.
-
- Checking for updates...
- Sprawdzanie aktualizacji...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Nie można zaimportować QtNetwork -- szczegóły możesz zobaczyć w Widoku rapotru. Menedżer dodatków jest niedostępny.
Apply
Zastosuj
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Menedżer dodatków: Pomijam sprawdzania aktualizacji, ponieważ preferencja użytkownika Sprawdź automatycznie ma wartość Fałsz
-
update(s)
- aktualizacja
+ aktualizacji
@@ -656,6 +716,11 @@
Macro successfully removed.
Makro zostało pomyślnie usunięte.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Menedżer dodatków: Pomijam sprawdzania aktualizacji, ponieważ preferencja użytkownika Sprawdź automatycznie ma wartość Fałsz
+
Restart required
@@ -679,7 +744,7 @@
Too many to list
- Too many to list
+ Lista jest zbyt długa do wyświetlenia
@@ -694,28 +759,39 @@
Cannot execute Python
- Cannot execute Python
+ Nie można wykonać skryptu Python
Cannot execute pip
- Cannot execute pip
+ Nie można uruchomić pip
Package installation failed
- Package installation failed
+ Instalacja pakietu nie powiodła się
See Report View for detailed failure log.
- See Report View for detailed failure log.
+ Szczegóły zapisu awarii znajdują się w widoku raportu.
Installation of macro failed
Instalacja makrodefinicji nie powiodła się
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -749,12 +825,17 @@
Confirm remove
- Confirm remove
+ Potwierdź usunięcie
Are you sure you want to uninstall this Addon?
- Are you sure you want to uninstall this Addon?
+ Czy na pewno chcesz odinstalować ten dodatek?
+
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.qm
index 9922d04626..c461800375 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts
index 8e574059ed..d5aa92a32d 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -107,7 +122,7 @@
Delete cached version of this README and re-download
- Delete cached version of this README and re-download
+ Excluir a versão em cache deste README e baixar novamente
Delete cached version of this README and re-download
@@ -119,22 +134,22 @@
Filter regular expression is invalid
- Filter regular expression is invalid
+ Uma expressão regular filtro é inválida
-
- Click for details about package
- Clique para detalhes sobre o pacote
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Clique para detalhes sobre a bancada de trabalho
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Clique para ver detalhes sobre macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -146,6 +161,11 @@
Maintainers:
Mantenedores:
+
+
+ Tags
+ Tags
+
updated
@@ -176,6 +196,21 @@
Pending restart
Reinício pendente
+
+
+ Click for details about package
+ Clique para detalhes sobre o pacote
+
+
+
+ Click for details about workbench
+ Clique para detalhes sobre a bancada de trabalho
+
+
+
+ Click for details about macro
+ Clique para ver detalhes sobre macro
+
Installed version
@@ -293,10 +328,20 @@
Unable to fetch git updates for workbench
Não foi possível buscar atualizações do git para a bancada de trabalho
+
+
+ Retrieving info from
+ Recuperando informações de
+
Failed to read metadata from
- Failed to read metadata from
+ Falha ao ler metadados de
+
+
+
+ git fetch failed for {}
+ git fetch failed for {}
@@ -358,25 +403,15 @@
Caching macro code...
Armazenando o código da macro...
-
-
- Retrieving package metadata...
- Retrieving package metadata...
-
-
-
- Failed to execute pip. Returned error was:
- Falha ao executar pip. O erro retornado foi:
-
Retrieving description...
Recuperando descrição...
-
- Retrieving info from
- Recuperando informações de
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -496,7 +531,32 @@
Error: Unable to locate ZIP from
- Error: Unable to locate ZIP from
+ Erro: Não foi possível localizar o ZIP de
+
+
+
+ Retrieving package metadata...
+ Recuperando metadados do pacote...
+
+
+
+ Failed to execute pip. Returned error was:
+ Falha ao executar pip. O erro retornado foi:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
@@ -531,7 +591,7 @@
Checking connection
- Testando a conexão
+ Verificando conexão
@@ -546,12 +606,7 @@
Missing dependency
- Missing dependency
-
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Dependência ausente
@@ -566,17 +621,17 @@
Addon manager
- Gestor de Suplementos
+ Gerenciador de complementos
Restart now
- Restart now
+ Reiniciar agora
Restart later
- Restart later
+ Reiniciar mais tarde
@@ -588,6 +643,16 @@
Updating cache...
Atualizando cache...
+
+
+ Checking for updates...
+ Verificando por atualizações...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -596,7 +661,7 @@
You must restart FreeCAD for changes to take effect.
- You must restart FreeCAD for changes to take effect.
+ Você deve reiniciar o FreeCAD para que as alterações tenham efeito.
@@ -604,20 +669,15 @@
Reinicie o FreeCAD para que as mudanças tenham efeito. OK para reiniciar ou Cancelar para reiniciar mais tarde.
-
- Checking for updates...
- Verificando por atualizações...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Aplicar
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Gerenciador de Complementos: Ignorando a verificação de atualização porque a preferência do usuário AutoCheck é Falso
-
update(s)
@@ -653,6 +713,11 @@
Macro successfully removed.
Macro removida com êxito.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Gerenciador de Complementos: Ignorando a verificação de atualização porque a preferência do usuário AutoCheck é Falso
+
Restart required
@@ -666,7 +731,7 @@
All packages updates failed. Packages:
- All packages updates failed. Packages:
+ Todos os pacotes de atualização falharam. Pacotes:
@@ -676,7 +741,7 @@
Too many to list
- Too many to list
+ Muitos para listar
@@ -691,17 +756,17 @@
Cannot execute Python
- Cannot execute Python
+ Não é possível executar Python
Cannot execute pip
- Cannot execute pip
+ Não é possível executar pip
Package installation failed
- Package installation failed
+ Instalação do pacote falhou
@@ -713,6 +778,15 @@
Installation of macro failed
Falha na instalação da macro
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -726,7 +800,7 @@
Failed
- Failed
+ Falhou
@@ -746,12 +820,17 @@
Confirm remove
- Confirm remove
+ Confirme a remoção
Are you sure you want to uninstall this Addon?
- Are you sure you want to uninstall this Addon?
+ Tem certeza que deseja desinstalar este Addon?
+
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.qm
index 8b9effee7b..46e4683156 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts
index 509c059a16..98f005ecb7 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -122,19 +137,19 @@
Filter regular expression is invalid
-
- Click for details about package
- Click for details about package
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Click for details about workbench
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Click for details about macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -146,6 +161,11 @@
Maintainers:
Maintainers:
+
+
+ Tags
+ Tags
+
updated
@@ -176,6 +196,21 @@
Pending restart
Pending restart
+
+
+ Click for details about package
+ Click for details about package
+
+
+
+ Click for details about workbench
+ Click for details about workbench
+
+
+
+ Click for details about macro
+ Click for details about macro
+
Installed version
@@ -293,11 +328,21 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ Obtendo informações de
+
Failed to read metadata from
Failed to read metadata from
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -358,25 +403,15 @@
Caching macro code...
Caching macro code...
-
-
- Retrieving package metadata...
- Retrieving package metadata...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
Obtendo descrição...
-
- Retrieving info from
- Obtendo informações de
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -498,6 +533,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Retrieving package metadata...
+
+
+
+ Failed to execute pip. Returned error was:
+ Failed to execute pip. Returned error was:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -548,11 +608,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -588,6 +643,16 @@
Updating cache...
Updating cache...
+
+
+ Checking for updates...
+ A procurar atualizações...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -604,20 +669,15 @@
Reinicie o FreeCAD para que as alterações tenham efeito. Ok para reiniciar ou Cancelar para reiniciar mais tarde.
-
- Checking for updates...
- A procurar atualizações...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Aplicar
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Addon Manager: Skipping update check because AutoCheck user preference is False
-
update(s)
@@ -653,6 +713,11 @@
Macro successfully removed.
Macro removida com sucesso.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+
Restart required
@@ -713,6 +778,15 @@
Installation of macro failed
Installation of macro failed
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -753,6 +827,11 @@
Are you sure you want to uninstall this Addon?
Are you sure you want to uninstall this Addon?
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
Macro could not be removed.
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.qm
index a1b978c791..2e2ff97459 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts
index ea4ff43f2f..e64be4b4eb 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -123,19 +138,19 @@
Filter regular expression is invalid
-
- Click for details about package
- Click for details about package
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Click for details about workbench
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Click for details about macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -147,6 +162,11 @@
Maintainers:
Maintainers:
+
+
+ Tags
+ Tags
+
updated
@@ -177,6 +197,21 @@
Pending restart
Pending restart
+
+
+ Click for details about package
+ Click for details about package
+
+
+
+ Click for details about workbench
+ Click for details about workbench
+
+
+
+ Click for details about macro
+ Click for details about macro
+
Installed version
@@ -294,11 +329,21 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ Preluarea informațiilor de la
+
Failed to read metadata from
Failed to read metadata from
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -359,25 +404,15 @@
Caching macro code...
Caching macro code...
-
-
- Retrieving package metadata...
- Retrieving package metadata...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
Recuperez descrierea...
-
- Retrieving info from
- Preluarea informațiilor de la
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -499,6 +534,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Retrieving package metadata...
+
+
+
+ Failed to execute pip. Returned error was:
+ Failed to execute pip. Returned error was:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -549,11 +609,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -589,6 +644,16 @@
Updating cache...
Updating cache...
+
+
+ Checking for updates...
+ Verifica actualizări...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -605,20 +670,15 @@
Trebuie să reporniți FreeCAD pentru ca modificările să aibă efect. Apăsați Ok pentru a reporni FreeCAD acum, sau Anulați pentru a reporni mai târziu.
-
- Checking for updates...
- Verifica actualizări...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Aplică
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Addon Manager: Skipping update check because AutoCheck user preference is False
-
update(s)
@@ -654,6 +714,11 @@
Macro successfully removed.
Macro șters cu succes.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+
Restart required
@@ -714,6 +779,16 @@
Installation of macro failed
Installation of macro failed
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -754,6 +829,11 @@
Are you sure you want to uninstall this Addon?
Are you sure you want to uninstall this Addon?
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
Macro could not be removed.
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.qm
index 906c5959f8..7566c8a9a0 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts
index 5ce9789364..5caa674fc5 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -124,19 +139,19 @@
Filter regular expression is invalid
-
- Click for details about package
- Click for details about package
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Click for details about workbench
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Click for details about macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -148,6 +163,11 @@
Maintainers:
Maintainers:
+
+
+ Tags
+ Tags
+
updated
@@ -178,6 +198,21 @@
Pending restart
Pending restart
+
+
+ Click for details about package
+ Click for details about package
+
+
+
+ Click for details about workbench
+ Click for details about workbench
+
+
+
+ Click for details about macro
+ Click for details about macro
+
Installed version
@@ -295,11 +330,21 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ Получение информации от
+
Failed to read metadata from
Failed to read metadata from
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -360,25 +405,15 @@
Caching macro code...
Кэширование макрокода...
-
-
- Retrieving package metadata...
- Retrieving package metadata...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
Получение описания...
-
- Retrieving info from
- Получение информации от
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -500,6 +535,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Retrieving package metadata...
+
+
+
+ Failed to execute pip. Returned error was:
+ Failed to execute pip. Returned error was:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -548,12 +608,7 @@
Missing dependency
- Missing dependency
-
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Отсутствуют зависимости
@@ -590,6 +645,16 @@
Updating cache...
Обновление кэша...
+
+
+ Checking for updates...
+ Проверка обновлений...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -606,20 +671,15 @@
Вы должны перезапустить FreeCAD для применения изменений. Нажмите Ok, чтобы перезапустить FreeCAD сейчас, или Отменить, чтобы перезапустить позже.
-
- Checking for updates...
- Проверка обновлений...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Применить
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Addon Manager: Skipping update check because AutoCheck user preference is False
-
update(s)
@@ -655,6 +715,11 @@
Macro successfully removed.
Макрос успешно удален.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+
Restart required
@@ -678,7 +743,7 @@
Too many to list
- Too many to list
+ Слишком много для списка
@@ -693,17 +758,17 @@
Cannot execute Python
- Cannot execute Python
+ Невозможно выполнить Python
Cannot execute pip
- Cannot execute pip
+ Невозможно выполнить pip
Package installation failed
- Package installation failed
+ Установка пакета не удалась
@@ -715,6 +780,17 @@
Installation of macro failed
Installation of macro failed
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -748,12 +824,17 @@
Confirm remove
- Confirm remove
+ Подтвердите удаление
Are you sure you want to uninstall this Addon?
- Are you sure you want to uninstall this Addon?
+ Вы действительно хотите удалить это Дополнение?
+
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.qm
index 69d84a4357..69480f7f83 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts
index 2b2b515fb6..9faede4f67 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -124,19 +139,19 @@
Regularni izraz sita je neveljaven
-
- Click for details about package
- Kliknite za podrobnosti o paketu
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Kliknite za podrobnosti o delovnem okolju
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Kliknite za podrobnosti o makru
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -148,6 +163,11 @@
Maintainers:
Vzdrževalci:
+
+
+ Tags
+ Tags
+
updated
@@ -178,6 +198,21 @@
Pending restart
Čakanje na ponovni zagon
+
+
+ Click for details about package
+ Kliknite za podrobnosti o paketu
+
+
+
+ Click for details about workbench
+ Kliknite za podrobnosti o delovnem okolju
+
+
+
+ Click for details about macro
+ Kliknite za podrobnosti o makru
+
Installed version
@@ -252,7 +287,7 @@
Checking network connection...
- Preverjanje omrežne povezave ...
+ Preverjanje omrežne povezave ...
@@ -295,15 +330,25 @@
Unable to fetch git updates for workbench
Ni mogoče pridobiti git posodobitev za delovno okolje
+
+
+ Retrieving info from
+ Pridobivanje podatkov iz
+
Failed to read metadata from
Spodletelo branje metapodatkov s
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
- git fetch failed for {wb.name}
+ spodletelo pridobivanje git-a za {wb.name}
@@ -358,27 +403,17 @@
Caching macro code...
- Pridobivanje kode makra ...
-
-
-
- Retrieving package metadata...
- Pridobivanje metapodatkov paketa ...
-
-
-
- Failed to execute pip. Returned error was:
- Izvršitev "slike v sliki" je spodletela. Vrnjena napaka:
+ Pridobivanje kode makra ...
Retrieving description...
- Pridobivanje opisov ...
+ Pridobivanje opisov ...
-
- Retrieving info from
- Pridobivanje podatkov iz
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -473,7 +508,7 @@
Retrieving macro description...
- Pridobivanje opisov makrov ...
+ Pridobivanje opisov makrov ...
@@ -498,7 +533,32 @@
Error: Unable to locate ZIP from
- Error: Unable to locate ZIP from
+ Napaka: Ni mogoče najti ZIP-a od
+
+
+
+ Retrieving package metadata...
+ Pridobivanje metapodatkov paketa ...
+
+
+
+ Failed to execute pip. Returned error was:
+ Izvršitev "slike v sliki" je spodletela. Vrnjena napaka:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
@@ -538,7 +598,7 @@
Checking for connection to GitHub...
- Preverjanje povezave do GitHub-a ...
+ Preverjanje povezave do GitHub-a ...
@@ -548,17 +608,12 @@
Missing dependency
- Missing dependency
-
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Manjkajoča odvisnost
Starting up...
- Pričenjanje ...
+ Pričenjanje ...
@@ -588,7 +643,17 @@
Updating cache...
- Posodabljanje krajevnega predpomnilnika ...
+ Posodabljanje krajevnega predpomnilnika ...
+
+
+
+ Checking for updates...
+ Preverjam za posodobitve...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
@@ -606,20 +671,15 @@
Za uveljavitev sprememb je potrebno FreeCAD ponovno zaganti. Za takojšen ponovni zagon klinite V redu, če želite ponovno zagnati kasneje, pa kliknite Prekliči.
-
- Checking for updates...
- Preverjam za posodobitve...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ QtNetwork-a ni mogoče uvoziti - za več podrobnosti preberite Poročevalni pogled. Upravljalnik dodatkov ni na voljo.
Apply
Uveljavi
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Upravljalnik dodatkov: Preskakovanje preverjanja posodobitev, ker je v prednastavitvah samodejno preverjanje neokljukano
-
update(s)
@@ -655,6 +715,11 @@
Macro successfully removed.
Makro uspešno odstranjen.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Upravljalnik dodatkov: Preskakovanje preverjanja posodobitev, ker je v prednastavitvah samodejno preverjanje neokljukano
+
Restart required
@@ -678,7 +743,7 @@
Too many to list
- Too many to list
+ Preveč za navedbo
@@ -693,28 +758,39 @@
Cannot execute Python
- Cannot execute Python
+ Pythona ni mogoče izvesti
Cannot execute pip
- Cannot execute pip
+ Slike v sliki ni mogoče izvesti
Package installation failed
- Package installation failed
+ Namestitev paketa spodletela
See Report View for detailed failure log.
- See Report View for detailed failure log.
+ Za podrobnejši zapisnik o napaki poglejte Poročevalni pogled.
Installation of macro failed
Nameščanje makrov spodletelo
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -748,12 +824,17 @@
Confirm remove
- Confirm remove
+ Potrdi odstranitev
Are you sure you want to uninstall this Addon?
- Are you sure you want to uninstall this Addon?
+ Ali ste prepričani, da želite odmestiti ta Dodatek?
+
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
@@ -827,12 +908,12 @@
Configure...
- Nastavi ...
+ Nastavi ...
Downloading info...
- Prenašanje podatkov ...
+ Prenašanje podatkov ...
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.qm
index 3fe22f5fd3..6b87516a89 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts
index 9e0689dd39..42106aea98 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -122,19 +137,19 @@
Filter regular expression is invalid
-
- Click for details about package
- Click for details about package
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Click for details about workbench
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Click for details about macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -146,6 +161,11 @@
Maintainers:
Maintainers:
+
+
+ Tags
+ Tags
+
updated
@@ -176,6 +196,21 @@
Pending restart
Pending restart
+
+
+ Click for details about package
+ Click for details about package
+
+
+
+ Click for details about workbench
+ Click for details about workbench
+
+
+
+ Click for details about macro
+ Click for details about macro
+
Installed version
@@ -293,11 +328,21 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ Hämtar information från
+
Failed to read metadata from
Failed to read metadata from
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -358,25 +403,15 @@
Caching macro code...
Caching macro code...
-
-
- Retrieving package metadata...
- Retrieving package metadata...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
Hämtar beskrivning...
-
- Retrieving info from
- Hämtar information från
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -498,6 +533,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Retrieving package metadata...
+
+
+
+ Failed to execute pip. Returned error was:
+ Failed to execute pip. Returned error was:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -548,11 +608,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -588,6 +643,16 @@
Updating cache...
Updating cache...
+
+
+ Checking for updates...
+ Letar efter uppdateringar...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -604,20 +669,15 @@
Du måste starta om FreeCAD för att ändringar ska börja gälla. Tryck Ok för att starta om FreeCAD nu, eller Avbryt för att starta om senare.
-
- Checking for updates...
- Letar efter uppdateringar...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Verkställ
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Addon Manager: Skipping update check because AutoCheck user preference is False
-
update(s)
@@ -653,6 +713,11 @@
Macro successfully removed.
Makrot togs bort.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+
Restart required
@@ -713,6 +778,15 @@
Installation of macro failed
Installation of macro failed
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -753,6 +827,11 @@
Are you sure you want to uninstall this Addon?
Are you sure you want to uninstall this Addon?
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
Macro could not be removed.
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.qm
index f71ba898b0..9f945cb7a5 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts
index a69afb8bee..a10018e78a 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -122,19 +137,19 @@
Süzgeç düzenli ifadesi geçersiz
-
- Click for details about package
- Paket ayrıntıları için tıklayın
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Tezgah ayrıntıları için tıklayın
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Makro ayrıntıları için tıklayın
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -146,6 +161,11 @@
Maintainers:
Geliştiriciler:
+
+
+ Tags
+ Tags
+
updated
@@ -176,6 +196,21 @@
Pending restart
Yeniden başlatma askıya alınıyor
+
+
+ Click for details about package
+ Paket ayrıntıları için tıklayın
+
+
+
+ Click for details about workbench
+ Tezgah ayrıntıları için tıklayın
+
+
+
+ Click for details about macro
+ Makro ayrıntıları için tıklayın
+
Installed version
@@ -293,11 +328,21 @@
Unable to fetch git updates for workbench
Tezgah için git güncellemeleri getirme başarısız
+
+
+ Retrieving info from
+ Bilgi alınıyor
+
Failed to read metadata from
Şuradan meta veri okunamadı:
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -358,25 +403,15 @@
Caching macro code...
Makro kodu ara belleğe alınıyor...
-
-
- Retrieving package metadata...
- Paket meta verisi getiriliyor...
-
-
-
- Failed to execute pip. Returned error was:
- Pip komutu çalıştırma başarısız. Hata verme sebebi:
-
Retrieving description...
Tanım alınıyor...
-
- Retrieving info from
- Bilgi alınıyor
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -498,6 +533,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Paket meta verisi getiriliyor...
+
+
+
+ Failed to execute pip. Returned error was:
+ Pip komutu çalıştırma başarısız. Hata verme sebebi:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -548,11 +608,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -588,6 +643,16 @@
Updating cache...
Önbellek güncelleniyor...
+
+
+ Checking for updates...
+ Güncellemeler kontrol ediliyor...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -604,20 +669,15 @@
Değişikliklerin geçerli olması için FreeCAD'i yeniden başlatmalısınız. FreeCAD'i şimdi yeniden başlatmak için Tamam'a, ya da daha sonra yeniden başlatmak için İptal'e basın.
-
- Checking for updates...
- Güncellemeler kontrol ediliyor...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Uygula
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Eklenti Yönetici: Güncelleme denetimi atlanıyor çünkü OtoDenetleme kullanıcı tercihi "Yanlış"
-
update(s)
@@ -653,6 +713,11 @@
Macro successfully removed.
Makro başarıyla kaldırıldı.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Eklenti Yönetici: Güncelleme denetimi atlanıyor çünkü OtoDenetleme kullanıcı tercihi "Yanlış"
+
Restart required
@@ -713,6 +778,15 @@
Installation of macro failed
Makronun kurulumu başarısız
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -753,6 +827,11 @@
Are you sure you want to uninstall this Addon?
Are you sure you want to uninstall this Addon?
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
Macro could not be removed.
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.qm
index de03984e37..60fcf90385 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts
index 37f21f0ea0..1741621be8 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -124,19 +139,19 @@
Filter regular expression is invalid
-
- Click for details about package
- Click for details about package
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Click for details about workbench
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Click for details about macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -148,6 +163,11 @@
Maintainers:
Maintainers:
+
+
+ Tags
+ Tags
+
updated
@@ -178,6 +198,21 @@
Pending restart
Pending restart
+
+
+ Click for details about package
+ Click for details about package
+
+
+
+ Click for details about workbench
+ Click for details about workbench
+
+
+
+ Click for details about macro
+ Click for details about macro
+
Installed version
@@ -294,15 +329,25 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ Retrieving info from
+
Failed to read metadata from
Failed to read metadata from
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
- git fetch failed for {wb.name}
+ Помилка отримання git
@@ -359,25 +404,15 @@
Caching macro code...
Кешування макрокоду ...
-
-
- Retrieving package metadata...
- Retrieving package metadata...
-
-
-
- Failed to execute pip. Returned error was:
- Не вдалося виконати pip. Повернена помилка була:
-
Retrieving description...
Отримання опису...
-
- Retrieving info from
- Retrieving info from
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -497,7 +532,32 @@
Error: Unable to locate ZIP from
- Error: Unable to locate ZIP from
+ Помилка: неможливо знайти ZIP з
+
+
+
+ Retrieving package metadata...
+ Retrieving package metadata...
+
+
+
+ Failed to execute pip. Returned error was:
+ Не вдалося виконати pip. Повернена помилка була:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
@@ -547,12 +607,7 @@
Missing dependency
- Missing dependency
-
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Відсутня залежність
@@ -589,6 +644,16 @@
Updating cache...
Оновлення кешу…
+
+
+ Checking for updates...
+ Перевірка наявності оновлень...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -605,20 +670,15 @@
You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later.
-
- Checking for updates...
- Перевірка наявності оновлень...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Не вдалося імпортувати QtNetwork -- дивіться деталі звіту для перегляду. Addon Manager недоступний.
Apply
Застосувати
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Addon Manager: Skipping update check because AutoCheck user preference is False
-
update(s)
@@ -654,6 +714,11 @@
Macro successfully removed.
Макрос успішно видалений.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+
Restart required
@@ -677,7 +742,7 @@
Too many to list
- Too many to list
+ Забагато для списку
@@ -692,28 +757,39 @@
Cannot execute Python
- Cannot execute Python
+ Не вдалося виконати Python
Cannot execute pip
- Cannot execute pip
+ Не вдалося виконати pip
Package installation failed
- Package installation failed
+ Не вдалося встановити пакет
See Report View for detailed failure log.
- See Report View for detailed failure log.
+ Перегляньте Звіт про детальний журнал помилок.
Installation of macro failed
Installation of macro failed
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -747,12 +823,17 @@
Confirm remove
- Confirm remove
+ Підтвердити видалення
Are you sure you want to uninstall this Addon?
- Are you sure you want to uninstall this Addon?
+ Ви впевнені, що хочете видалити цей модуль?
+
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.qm
index ba5c38896b..4239d1a735 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts
index 3b3eafc308..c0c8fa47ec 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -122,19 +137,19 @@
Filter regular expression is invalid
-
- Click for details about package
- Click for details about package
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Click for details about workbench
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Click for details about macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -146,6 +161,11 @@
Maintainers:
Maintainers:
+
+
+ Tags
+ Tags
+
updated
@@ -176,6 +196,21 @@
Pending restart
Pending restart
+
+
+ Click for details about package
+ Click for details about package
+
+
+
+ Click for details about workbench
+ Click for details about workbench
+
+
+
+ Click for details about macro
+ Click for details about macro
+
Installed version
@@ -293,11 +328,21 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ S'està recuperant informació de
+
Failed to read metadata from
Failed to read metadata from
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -358,25 +403,15 @@
Caching macro code...
Caching macro code...
-
-
- Retrieving package metadata...
- Retrieving package metadata...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
S'està recuperant la descripció...
-
- Retrieving info from
- S'està recuperant informació de
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -498,6 +533,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Retrieving package metadata...
+
+
+
+ Failed to execute pip. Returned error was:
+ Failed to execute pip. Returned error was:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -548,11 +608,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -588,6 +643,16 @@
Updating cache...
Updating cache...
+
+
+ Checking for updates...
+ S'estan buscant actualitzacions...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -604,20 +669,15 @@
Heu de reiniciar FreeCAD perquè els canvis siguen efectius. Premeu D'acord per reiniciar FreeCAD ara o bé Cancel·la per reiniciar-lo després.
-
- Checking for updates...
- S'estan buscant actualitzacions...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Aplica
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Addon Manager: Skipping update check because AutoCheck user preference is False
-
update(s)
@@ -653,6 +713,11 @@
Macro successfully removed.
S'ha eliminat la macro correctament.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+
Restart required
@@ -713,6 +778,15 @@
Installation of macro failed
Installation of macro failed
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+ {} total, see Report view for list
+
+
Succeeded
@@ -753,6 +827,11 @@
Are you sure you want to uninstall this Addon?
Are you sure you want to uninstall this Addon?
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
Macro could not be removed.
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_vi.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_vi.qm
index 805132a0ba..c13b511412 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_vi.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_vi.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts
index 27aee35d09..5423283162 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -121,19 +136,19 @@
Filter regular expression is invalid
-
- Click for details about package
- Click for details about package
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Click for details about workbench
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Click for details about macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -145,6 +160,11 @@
Maintainers:
Maintainers:
+
+
+ Tags
+ Tags
+
updated
@@ -175,6 +195,21 @@
Pending restart
Pending restart
+
+
+ Click for details about package
+ Click for details about package
+
+
+
+ Click for details about workbench
+ Click for details about workbench
+
+
+
+ Click for details about macro
+ Click for details about macro
+
Installed version
@@ -292,11 +327,21 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ Retrieving info from
+
Failed to read metadata from
Failed to read metadata from
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -357,25 +402,15 @@
Caching macro code...
Caching macro code...
-
-
- Retrieving package metadata...
- Retrieving package metadata...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
Retrieving description...
-
- Retrieving info from
- Retrieving info from
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -497,6 +532,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Retrieving package metadata...
+
+
+
+ Failed to execute pip. Returned error was:
+ Failed to execute pip. Returned error was:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -547,11 +607,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -587,6 +642,16 @@
Updating cache...
Updating cache...
+
+
+ Checking for updates...
+ Kiểm tra cập nhật...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -603,20 +668,15 @@
You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later.
-
- Checking for updates...
- Kiểm tra cập nhật...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
Áp dụng
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Addon Manager: Skipping update check because AutoCheck user preference is False
-
update(s)
@@ -652,6 +712,11 @@
Macro successfully removed.
Macro successfully removed.
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+
Restart required
@@ -712,6 +777,14 @@
Installation of macro failed
Installation of macro failed
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+
+
Succeeded
@@ -752,6 +825,11 @@
Are you sure you want to uninstall this Addon?
Are you sure you want to uninstall this Addon?
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
Macro could not be removed.
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.qm
index bc51bf46d1..c1558dfa1a 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts
index 354059c2f3..8ba94f776b 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -121,19 +136,19 @@
Filter regular expression is invalid
-
- Click for details about package
- Click for details about package
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Click for details about workbench
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Click for details about macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -145,6 +160,11 @@
Maintainers:
Maintainers:
+
+
+ Tags
+ Tags
+
updated
@@ -175,6 +195,21 @@
Pending restart
Pending restart
+
+
+ Click for details about package
+ Click for details about package
+
+
+
+ Click for details about workbench
+ Click for details about workbench
+
+
+
+ Click for details about macro
+ Click for details about macro
+
Installed version
@@ -292,11 +327,21 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ 获取信息
+
Failed to read metadata from
Failed to read metadata from
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -357,25 +402,15 @@
Caching macro code...
Caching macro code...
-
-
- Retrieving package metadata...
- Retrieving package metadata...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
正在获取描述...
-
- Retrieving info from
- 获取信息
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -497,6 +532,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Retrieving package metadata...
+
+
+
+ Failed to execute pip. Returned error was:
+ Failed to execute pip. Returned error was:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -547,11 +607,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -587,6 +642,16 @@
Updating cache...
Updating cache...
+
+
+ Checking for updates...
+ 正在检查更新...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -603,20 +668,15 @@
必须重新启动FreeCAD，以便更改生效。按确认立即重启FreeCAD，如您要稍后再重启，请按取消。
-
- Checking for updates...
- 正在检查更新...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
应用
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Addon Manager: Skipping update check because AutoCheck user preference is False
-
update(s)
@@ -652,6 +712,11 @@
Macro successfully removed.
宏被成功删除。
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+
Restart required
@@ -712,6 +777,14 @@
Installation of macro failed
Installation of macro failed
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+
+
Succeeded
@@ -752,6 +825,11 @@
Are you sure you want to uninstall this Addon?
Are you sure you want to uninstall this Addon?
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
Macro could not be removed.
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.qm
index 2ed537a7c9..dc7bc2bcca 100644
Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.qm differ
diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts
index 4fce0014a9..0348481d31 100644
--- a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts
+++ b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts
@@ -3,6 +3,21 @@
AddonsInstaller
+
+
+ Version {version} installed on {date}
+ Version {version} installed on {date}
+
+
+
+ Version {version} installed
+ Version {version} installed
+
+
+
+ Installed on {date}
+ Installed on {date}
+
Installed
@@ -121,19 +136,19 @@
Filter regular expression is invalid
-
- Click for details about package
- Click for details about package
+
+ Click for details about package {}
+ Click for details about package {}
-
- Click for details about workbench
- Click for details about workbench
+
+ Click for details about workbench {}
+ Click for details about workbench {}
-
- Click for details about macro
- Click for details about macro
+
+ Click for details about macro {}
+ Click for details about macro {}
@@ -145,6 +160,11 @@
Maintainers:
Maintainers:
+
+
+ Tags
+ Tags
+
updated
@@ -175,6 +195,21 @@
Pending restart
Pending restart
+
+
+ Click for details about package
+ Click for details about package
+
+
+
+ Click for details about workbench
+ Click for details about workbench
+
+
+
+ Click for details about macro
+ Click for details about macro
+
Installed version
@@ -292,11 +327,21 @@
Unable to fetch git updates for workbench
Unable to fetch git updates for workbench
+
+
+ Retrieving info from
+ Retrieving info from
+
Failed to read metadata from
Failed to read metadata from
+
+
+ git fetch failed for {}
+ git fetch failed for {}
+
git fetch failed for {wb.name}
@@ -357,25 +402,15 @@
Caching macro code...
Caching macro code...
-
-
- Retrieving package metadata...
- Retrieving package metadata...
-
-
-
- Failed to execute pip. Returned error was:
- Failed to execute pip. Returned error was:
-
Retrieving description...
Retrieving description...
-
- Retrieving info from
- Retrieving info from
+
+ Retrieving info from {}
+ Retrieving info from {}
@@ -497,6 +532,31 @@
Error: Unable to locate ZIP from
Error: Unable to locate ZIP from
+
+
+ Retrieving package metadata...
+ Retrieving package metadata...
+
+
+
+ Failed to execute pip. Returned error was:
+ Failed to execute pip. Returned error was:
+
+
+
+ Downloaded package.xml for {}
+ Downloaded package.xml for {}
+
+
+
+ Downloaded metadata.txt for {}
+ Downloaded metadata.txt for {}
+
+
+
+ Downloaded icon for {}
+ Downloaded icon for {}
+
Failed to repair missing .git directory
@@ -547,11 +607,6 @@
Missing dependency
Missing dependency
-
-
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
- Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
-
Starting up...
@@ -587,6 +642,16 @@
Updating cache...
Updating cache...
+
+
+ Checking for updates...
+ 檢查更新...
+
+
+
+ Apply {} update(s)
+ Apply {} update(s)
+
The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing!
@@ -603,20 +668,15 @@
You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later.
-
- Checking for updates...
- 檢查更新...
+
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
+ Could not import QtNetwork -- see Report View for details. Addon Manager unavailable.
Apply
應用
-
-
- Addon Manager: Skipping update check because AutoCheck user preference is False
- Addon Manager: Skipping update check because AutoCheck user preference is False
-
update(s)
@@ -652,6 +712,11 @@
Macro successfully removed.
巨集成功的移除
+
+
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+ Addon Manager: Skipping update check because AutoCheck user preference is False
+
Restart required
@@ -712,6 +777,14 @@
Installation of macro failed
Installation of macro failed
+
+
+ {} total, see Report view for list
+ Describes the number of updates that were completed ('{}' is replaced by the number of updates)
+
+ {} total, see Report view for list
+
+
Succeeded
@@ -752,6 +825,11 @@
Are you sure you want to uninstall this Addon?
Are you sure you want to uninstall this Addon?
+
+
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+ Execution of Addon's uninstall.py script failed. Proceeding with uninstall...
+
Macro could not be removed.
diff --git a/src/Mod/Arch/Resources/translations/Arch_de.qm b/src/Mod/Arch/Resources/translations/Arch_de.qm
index 10b98a3dd8..9bffd9afc6 100644
Binary files a/src/Mod/Arch/Resources/translations/Arch_de.qm and b/src/Mod/Arch/Resources/translations/Arch_de.qm differ
diff --git a/src/Mod/Arch/Resources/translations/Arch_de.ts b/src/Mod/Arch/Resources/translations/Arch_de.ts
index 404de8e4db..3271566e26 100644
--- a/src/Mod/Arch/Resources/translations/Arch_de.ts
+++ b/src/Mod/Arch/Resources/translations/Arch_de.ts
@@ -4482,7 +4482,7 @@ Wenn Länge = 0 dann wird der Länge so berechnet, dass die Höhe gleich dem rel
Create various types of rebars, including U-shaped, L-shaped, and stirrup
- Create various types of rebars, including U-shaped, L-shaped, and stirrup
+ Erstellen verschiedener Arten von Bewehrungsstäben, einschließlich U-förmiger, L-förmiger und bügelförmiger Stäbe
diff --git a/src/Mod/Arch/Resources/translations/Arch_it.qm b/src/Mod/Arch/Resources/translations/Arch_it.qm
index 158f14b702..9d8388c677 100644
Binary files a/src/Mod/Arch/Resources/translations/Arch_it.qm and b/src/Mod/Arch/Resources/translations/Arch_it.qm differ
diff --git a/src/Mod/Arch/Resources/translations/Arch_it.ts b/src/Mod/Arch/Resources/translations/Arch_it.ts
index ef57ab9c1e..336c2d712c 100644
--- a/src/Mod/Arch/Resources/translations/Arch_it.ts
+++ b/src/Mod/Arch/Resources/translations/Arch_it.ts
@@ -4482,7 +4482,7 @@ Se Base = 0 allora la Base viene calcolata in modo che l'altezza sia la stessa d
Create various types of rebars, including U-shaped, L-shaped, and stirrup
- Create various types of rebars, including U-shaped, L-shaped, and stirrup
+ Creare vari tipi di barre, tra cui a forma di U, a forma di L e staffa
diff --git a/src/Mod/Arch/Resources/translations/Arch_ka.qm b/src/Mod/Arch/Resources/translations/Arch_ka.qm
index e7c7338007..12a83ad521 100644
Binary files a/src/Mod/Arch/Resources/translations/Arch_ka.qm and b/src/Mod/Arch/Resources/translations/Arch_ka.qm differ
diff --git a/src/Mod/Arch/Resources/translations/Arch_ka.ts b/src/Mod/Arch/Resources/translations/Arch_ka.ts
index 0e22a33afb..9231cb0373 100644
--- a/src/Mod/Arch/Resources/translations/Arch_ka.ts
+++ b/src/Mod/Arch/Resources/translations/Arch_ka.ts
@@ -181,7 +181,7 @@
Turn cutting on when activating this level
- Turn cutting on when activating this level
+ ამ დონის აქტივაციისას ჭრის ჩართვა
@@ -441,7 +441,7 @@
The finishing of the ceiling of this space
- The finishing of the ceiling of this space
+ ამ ფართის ჭერის გაწყობა
@@ -556,7 +556,7 @@
If True, resulting views will be clipped to the section plane area.
- If True, resulting views will be clipped to the section plane area.
+ თუ ჩართულია, ნაჩვენები ხედები სექციის სიბრტყეში ამოიჭრება.
@@ -811,7 +811,7 @@
The preset number this window is based on
- The preset number this window is based on
+ პრესეტის ნომერი, რომელზეც ეს ფანჯარაა დაფუძნებული
@@ -1261,7 +1261,7 @@
Centers the profile over the edges or not
- Centers the profile over the edges or not
+ პროფილის წიბოებს შუა გასწორების ჩართ/გამორთ
@@ -1302,7 +1302,7 @@
If true, the colors from the linked file will be kept updated
- If true, the colors from the linked file will be kept updated
+ თუ ჩართულია, ფერების წამოღება მიბმული ფაილიდან ხშირად განახლდება
@@ -1757,7 +1757,7 @@
If true the element are aligned with axes
- If true the element are aligned with axes
+ თუ ჩართულია, ელემენტი ღერძებთან იქნება სწორებული
@@ -2122,7 +2122,7 @@
Specifies the scale applied to each panel view.
- Specifies the scale applied to each panel view.
+ განსაზღვრავს მასშტაბს, რომელიც გამოიყენება პანელის თითოეულ ხედზე.
@@ -2936,7 +2936,7 @@ Building creation aborted.
Hole wire
- ნახვრეტის მოღუნული ხაზი
+ ნახვრეტის პოლიხაზი
@@ -2966,7 +2966,7 @@ Building creation aborted.
Wires
- მოღუნული ხაზები
+ პოლიხაზები
@@ -3076,12 +3076,12 @@ Building creation aborted.
This operation can take a long time. Proceed?
- This operation can take a long time. Proceed?
+ ამ ოპერაციას შეიძლება დიდი დრო დასჭირდეს. გავაგრძელოთ?
The mesh has more than 500 facets. This will take a couple of minutes...
- The mesh has more than 500 facets. This will take a couple of minutes...
+ ბადეს აქვს 500-ზე მეტი წახნაგი. ამას რამდენიმე წუთი დასჭირდება...
@@ -3141,7 +3141,7 @@ Building creation aborted.
&Arch
- &არქიტექტურული
+ &არქიტექტურა
@@ -3156,7 +3156,7 @@ Building creation aborted.
Modification
- მოდიფიკაცია
+ ჩასწორება
@@ -4124,7 +4124,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela
Cut an object with a line with normal workplane
- Cut an object with a line with normal workplane
+ ობიექტის ხაზზე გაჭრა ჩვეულებრივი სამუშაო მაგიდით
@@ -4501,7 +4501,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela
Creates an external reference object
- Creates an external reference object
+ გარე ობიექტზე ბმულის შექმნა
@@ -4872,7 +4872,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela
&Arch
- &არქიტექტურული
+ &არქიტექტურა
@@ -4897,7 +4897,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela
Modification
- მოდიფიკაცია
+ ჩასწორება
@@ -4905,7 +4905,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela
&Arch
- &არქიტექტურული
+ &არქიტექტურა
@@ -4920,7 +4920,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela
Modification
- მოდიფიკაცია
+ ჩასწორება
@@ -5321,7 +5321,7 @@ Leave blank to use all objects from the document
Leave this empty to generate one at export
- Leave this empty to generate one at export
+ გატანისას დასაგენერირებლად ეს ცარიელი დატოვეთ
@@ -5678,7 +5678,7 @@ Leave blank to use all objects from the document
If this is checked, conversion is faster but the result might still contain triangulated faces
- If this is checked, conversion is faster but the result might still contain triangulated faces
+ თუ ჩართულია, კონვერტაცია უფრო სწრაფია, მაგრამ შედეგი შეიძლება მაინც შეიცავდეს ტრიანგულირებულ ზედაპირებს
@@ -5821,7 +5821,7 @@ instead of the FreeCAD web workbench
Include unit when sending measurements to clipboard
- Include unit when sending measurements to clipboard
+ აზომვის მნიშვნელობების ბაფერში კოპირებისას საზომი ერთეულების მიყოლება
@@ -5884,7 +5884,7 @@ instead of the FreeCAD web workbench
This is the default color for new Wall objects
- This is the default color for new Wall objects
+ ეს არის ახალი კედლების ნაგულისხმევი ფერი
@@ -6494,14 +6494,13 @@ Use this to force all objects to be exported as BREP geometry.
Curved shapes that cannot be represented as curves in IFC
are decomposed into flat facets.
If this is checked, an additional calculation is done to join coplanar facets.
- Curved shapes that cannot be represented as curves in IFC
-are decomposed into flat facets.
-If this is checked, an additional calculation is done to join coplanar facets.
+ მრუდი ფორმები, რომლებიც არ შეიძლება წარმოდგენილი იყოს მრუდების სახით IFC-ში დაიშლება ბრტყელ ნაწილებად.
+თუ ჩართულია, კომპლანარული წახნაგების შესაერთებლად დამატებითი გამოთვლა გაკეთდება.
Join coplanar facets when triangulating
- Join coplanar facets when triangulating
+ ტრიანგულაციის კომპლანარული წახნაგების შეერთება
diff --git a/src/Mod/Arch/Resources/translations/Arch_pl.qm b/src/Mod/Arch/Resources/translations/Arch_pl.qm
index c053d75bc9..c6b4a7bc9d 100644
Binary files a/src/Mod/Arch/Resources/translations/Arch_pl.qm and b/src/Mod/Arch/Resources/translations/Arch_pl.qm differ
diff --git a/src/Mod/Arch/Resources/translations/Arch_pl.ts b/src/Mod/Arch/Resources/translations/Arch_pl.ts
index c340aa3d26..452a59eddb 100644
--- a/src/Mod/Arch/Resources/translations/Arch_pl.ts
+++ b/src/Mod/Arch/Resources/translations/Arch_pl.ts
@@ -4479,7 +4479,7 @@ Jeśli Bieg = 0, wówczas Bieg jest obliczany tak, aby wysokość była taka sam
Create various types of rebars, including U-shaped, L-shaped, and stirrup
- Create various types of rebars, including U-shaped, L-shaped, and stirrup
+ Tworzy różne rodzaje prętów zbrojeniowych, w tym pręty w kształcie U, L i strzemiona
diff --git a/src/Mod/Arch/Resources/translations/Arch_sl.qm b/src/Mod/Arch/Resources/translations/Arch_sl.qm
index f03f4d86f2..5c574c3429 100644
Binary files a/src/Mod/Arch/Resources/translations/Arch_sl.qm and b/src/Mod/Arch/Resources/translations/Arch_sl.qm differ
diff --git a/src/Mod/Arch/Resources/translations/Arch_sl.ts b/src/Mod/Arch/Resources/translations/Arch_sl.ts
index 4d78c26bfe..72991f51e6 100644
--- a/src/Mod/Arch/Resources/translations/Arch_sl.ts
+++ b/src/Mod/Arch/Resources/translations/Arch_sl.ts
@@ -226,7 +226,7 @@
An optional standard (OmniClass, etc...) code for this component
- Izbirna standardna (OmniClass, ...) koda te sestavine
+ Izbirna standardna (OmniClass, ...) koda te sestavine
@@ -2269,12 +2269,12 @@
Add property...
- Dodaj lastnost ...
+ Dodaj lastnost ...
Add property set...
- Dodaj nabor lastnosti ...
+ Dodaj nabor lastnosti ...
@@ -2448,7 +2448,7 @@ Building creation aborted.
Found a shape containing curves, triangulating
- Najdena oblika, ki vsebuje krivulje. Trikotenje ...
+ Najdena oblika, ki vsebuje krivulje. Trikotenje
@@ -3153,7 +3153,7 @@ Building creation aborted.
&Draft
- &Osnutek
+ &Izris
@@ -3339,7 +3339,7 @@ Ustvarjanje etaže prekinjeno.
Wall Presets...
- Prednastavitve stene ...
+ Prednastavitve stene ...
@@ -3680,7 +3680,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela
Select tool...
- Izbiranje orodja ...
+ Izbiranje orodja ...
@@ -4480,7 +4480,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela
Create various types of rebars, including U-shaped, L-shaped, and stirrup
- Create various types of rebars, including U-shaped, L-shaped, and stirrup
+ Ustvari najrazličnejše vrste ojačitev, tudi U-je, L-je in stremena
@@ -4786,17 +4786,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela
Draft creation tools
- Orodja za ustvarjanje osnutkov
+ Draft creation tools
Draft annotation tools
- Orodja za opisovanje osnutkov
+ Draft annotation tools
Draft modification tools
- Orodja za preoblikovanje osnutkov
+ Draft modification tools
@@ -4849,17 +4849,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela
Draft creation tools
- Orodja za ustvarjanje osnutkov
+ Draft creation tools
Draft annotation tools
- Orodja za opisovanje osnutkov
+ Draft annotation tools
Draft modification tools
- Orodja za preoblikovanje osnutkov
+ Draft modification tools
@@ -4874,7 +4874,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela
&Draft
- &Osnutek
+ &Izris
@@ -4917,7 +4917,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela
&Draft
- &Osnutek
+ &Izris
@@ -4940,7 +4940,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela
Choose preset...
- Izberite prednastavitev ...
+ Izberite prednastavitev ...
@@ -4950,7 +4950,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela
Copy existing...
- Kopiraj obstoječe ...
+ Kopiraj obstoječe ...
@@ -5005,7 +5005,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela
A standard (MasterFormat, Omniclass...) code for this material
- Standardna koda (MasterFormat, Omniclass ...) tee snovi
+ Standardna koda (MasterFormat, Omniclass ...) te snovi
@@ -5264,7 +5264,7 @@ Pustite prazno, če želite uporabiti vse predmete v dokumentu
<html><head/><body><p>This exports the results to a CSV or Markdown file. </p><p><span style=" font-weight:600;">Note for CSV export:</span></p><p>In Libreoffice, you can keep this CSV file linked by right-clicking the Sheets tab bar -> New sheet -> From file -> Link (Note: as of LibreOffice v6.x the correct path now is: Sheet -> Insert Sheet... -> From file -> Browse...)</p></body></html>
- <html><head/><body><p>S tem se izvozi izid v datoteko CSV ali Markdown.. </p><p><span style=" font-weight:600;">Opomba glede CSV izvoza:</span></p><p>Datoteko CSV lahko z LibreOffice ohranite povezano z desnim klikom v vrstico z zavihki Delavni listi -> Nov delovni list -> Iz datoteke -> Povezava (Opomba: od LibreOffice v6.x dalje je nova pot: Delovni listi -> Vstavi delovni list ... -> Iz datoteke -> Prebrskaj ...)</p></body></html>
+ <html><head/><body><p>S tem se izvozi izid v datoteko CSV ali Markdown.. </p><p><span style=" font-weight:600;">Opomba glede CSV izvoza:</span></p><p>Datoteko CSV lahko z LibreOffice ohranite povezano z desnim klikom v vrstico z zavihki Delavni listi -> Nov delovni list -> Iz datoteke -> Povezava (Opomba: od LibreOffice v6.x dalje je nova pot: Delovni listi -> Vstavi delovni list ... -> Iz datoteke -> Prebrskaj ...)</p></body></html>
@@ -5408,7 +5408,7 @@ Pustite prazno, če želite uporabiti vse predmete v dokumentu
Copy existing...
- Kopiraj obstoječe ...
+ Kopiraj obstoječe ...
@@ -5591,12 +5591,12 @@ Pustite prazno, če želite uporabiti vse predmete v dokumentu
If this is checked, when an object becomes Subtraction or Addition of an Arch object, it will receive the Draft Construction color.
- Če je to označeno, predmet, ki postane seštevek ali odštevek arhitekurnega predmeta, prevzame barvo pomožnih črt osnutka.
+ Če je to označeno, predmet, ki postane seštevek ali odštevek arhitekturnega predmeta, prevzame barvo pomožnih črt izrisa.
Apply Draft construction style to subcomponents
- Uporabite slog pomožnih črt osnukta pri podsestavinah
+ Uporabite izrisov (Draft) slog pomožnih črt pri podsestavinah
diff --git a/src/Mod/Arch/Resources/translations/Arch_uk.qm b/src/Mod/Arch/Resources/translations/Arch_uk.qm
index 991cb2a6ae..ca9cf008c4 100644
Binary files a/src/Mod/Arch/Resources/translations/Arch_uk.qm and b/src/Mod/Arch/Resources/translations/Arch_uk.qm differ
diff --git a/src/Mod/Arch/Resources/translations/Arch_uk.ts b/src/Mod/Arch/Resources/translations/Arch_uk.ts
index 489839d82c..ce46aea75d 100644
--- a/src/Mod/Arch/Resources/translations/Arch_uk.ts
+++ b/src/Mod/Arch/Resources/translations/Arch_uk.ts
@@ -4483,7 +4483,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela
Create various types of rebars, including U-shaped, L-shaped, and stirrup
- Create various types of rebars, including U-shaped, L-shaped, and stirrup
+ Створюйте різні типи арматурних прутів, включаючи U-подібні, L-подібні та стременові
diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm b/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm
index 4feed7a1a6..4a39e4c086 100644
Binary files a/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm and b/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm differ
diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts b/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts
index 2c47d7923a..59a0c68c9a 100644
--- a/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts
+++ b/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts
@@ -56,7 +56,7 @@
A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files
- A MaterialName:SolidIndexesList map that relates material names with solid indexes to be used when referencing this object from other files
+ 材质名称: 从你的材料列表中引用，它将材料名称与实体索引联系起来，以便在从其他文件引用该对象时使用
@@ -136,7 +136,7 @@
If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode.
- If this is enabled, the inventor representation of this object will be saved in the FreeCAD file, allowing to reference it in other files in lightweight mode.
+ 如果启用了这个功能，这个对象的创建者的名字将保存在FreeCAD文件中，允许以轻量级模式在其他文件中引用它。
@@ -171,7 +171,7 @@
Cut the view above this level
- Cut the view above this level
+ 在这一层上切割视图
@@ -201,7 +201,7 @@
A margin to use when autosize is turned on
- A margin to use when autosize is turned on
+ 打开自动大小设置时使用的外边距
@@ -271,7 +271,7 @@
Use the material color as this object's shape color, if available
- Use the material color as this object's shape color, if available
+ 如果可用，使用材质颜色作为物体的形状颜色
@@ -301,7 +301,7 @@
A single fence post
- 一根篱笆桩
+ 一个栅栏柱
@@ -361,7 +361,7 @@
The color of this material when cut
- The color of this material when cut
+ 材料被切割时的颜色
@@ -406,7 +406,7 @@
If True, a spreadsheet containing the results is recreated when needed
- If True, a spreadsheet containing the results is recreated when needed
+ 如果开启，则在需要时重新创建包含结果的电子表格
@@ -681,7 +681,7 @@
The wall thickness of this pipe, if not based on a profile
- The wall thickness of this pipe, if not based on a profile
+ 管道的壁厚，如果不是基于剖面
@@ -751,27 +751,27 @@
The direction of the rods
- The direction of the rods
+ 杆子的方向
The diameter or side of the rods
- The diameter or side of the rods
+ 杆的直径或侧面
The number of rod sections
- The number of rod sections
+ 杆截面的数量
If the truss has a rod at its endpoint or not
- If the truss has a rod at its endpoint or not
+ 桁架的端点是否有杆
How to draw the rods
- How to draw the rods
+ 如何绘制杆
@@ -1041,12 +1041,12 @@
The thickness of the lower floor slab
- The thickness of the lower floor slab
+ 下方地板的厚度
The thickness of the upper floor slab
- The thickness of the upper floor slab
+ 上方地板的厚度
diff --git a/src/Mod/Draft/Resources/translations/Draft_ca.qm b/src/Mod/Draft/Resources/translations/Draft_ca.qm
index 770c0699f6..28b4d10e2a 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_ca.qm and b/src/Mod/Draft/Resources/translations/Draft_ca.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_ca.ts b/src/Mod/Draft/Resources/translations/Draft_ca.ts
index 2a598c13e2..44f4409170 100644
--- a/src/Mod/Draft/Resources/translations/Draft_ca.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_ca.ts
@@ -716,11 +716,6 @@ Aquesta propietat és només de lectura, jau que el nombre depèn dels punts con
Area of this object
Àrea d'aquest objecte
-
-
- The shape of this object
- La forma d'aquest objecte
-
The base object used by this object
@@ -731,6 +726,11 @@ Aquesta propietat és només de lectura, jau que el nombre depèn dels punts con
The PAT file used by this object
The PAT file used by this object
+
+
+ The shape of this object
+ La forma d'aquest objecte
+
The pattern name used by this object
@@ -1134,6 +1134,16 @@ beyond the dimension line
Line color
Color de línia
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1569,7 +1579,7 @@ El primer cop que s'utilitza crea un grup.
Manage or create annotation styles
- Manage or create annotation styles
+ Gestiona o crea estils d’anotació
@@ -1698,11 +1708,23 @@ La matriu es pot convertir en polar o circular canviant-ne el tipus.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Corba Bézier
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1713,11 +1735,21 @@ CTRL per ajustar, MAJÚS per restringir.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Eines Bézier
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1774,11 +1806,25 @@ El clon resultant pot ésser escalat en qualsevol de les seves tres direccions.<
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Corba Bézier cúbica
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2118,6 +2164,24 @@ També pit crear una còpia desplaçada de l'objecte original.
CTRL per ajustar, MAJÚS per restringir. Manteniu ALT i feu clic per crear una còpia per cada clic.
+
+ Draft_OrthoArray
+
+
+ Array
+ Matriu, Array
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Crea còpies de l'objecte seleccionat i les disposa en un patró ortogonal, fent que les còpies segueixin la direcció definida en els eixos X, Y i Z.
+
+La matriu es pot convertir en polar o circular canviant-ne el tipus.
+
+
Draft_PathArray
@@ -2824,14 +2888,6 @@ Un cop l'objecte és creat, feu doble clic a la vista d'arbre per a restaurar la
Aleshores, podeu usar-lo per desar posicions de càmera i estats d'objectes sempre que sigui necessari.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Grup
-
-
ImportAirfoilDAT
@@ -2900,6 +2956,11 @@ Aleshores, podeu usar-lo per desar posicions de càmera i estats d'objectes semp
Arc tools
Eines d'arc
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3048,16 +3109,16 @@ Aleshores, podeu usar-lo per desar posicions de càmera i estats d'objectes semp
Auto
Auto
-
-
- active command:
- ordre actiu:
-
None
Cap
+
+
+ active command:
+ ordre actiu:
+
Active Draft command
@@ -4152,6 +4213,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Merging layer:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -4997,8 +5063,8 @@ Per permetre que FreeCAD descarregui aquestes llibreries respongueu Sí.
- Bezier curve has been closed
- La corba Bézier s'ha tancat
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5020,6 +5086,11 @@ Per permetre que FreeCAD descarregui aquestes llibreries respongueu Sí.Click and drag to define next knot
Feu clic i arrossegueu per definir el següent nus
+
+
+ Bezier curve has been closed
+ La corba Bézier s'ha tancat
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5360,6 +5431,11 @@ Per permetre que FreeCAD descarregui aquestes llibreries respongueu Sí.Group name
Nom del grup
+
+
+ Group
+ Grup
+
Select an object to offset
@@ -5521,6 +5597,14 @@ L'angle final serà l'angle de base més aquesta quantitat.
s'ha exportat amb èxit
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Grup
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.qm b/src/Mod/Draft/Resources/translations/Draft_cs.qm
index 4582d46dd2..e657c07fc5 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_cs.qm and b/src/Mod/Draft/Resources/translations/Draft_cs.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.ts b/src/Mod/Draft/Resources/translations/Draft_cs.ts
index e3629974df..c6664e1454 100644
--- a/src/Mod/Draft/Resources/translations/Draft_cs.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_cs.ts
@@ -714,11 +714,6 @@ Tato vlastnost je pouze pro čtení, protože počet prvků závisí na bodech o
Area of this object
Plocha tohoto objektu
-
-
- The shape of this object
- The shape of this object
-
The base object used by this object
@@ -729,6 +724,11 @@ Tato vlastnost je pouze pro čtení, protože počet prvků závisí na bodech o
The PAT file used by this object
The PAT file used by this object
+
+
+ The shape of this object
+ The shape of this object
+
The pattern name used by this object
@@ -1139,6 +1139,16 @@ beyond the dimension line
Line color
Barva čáry
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1708,11 +1718,23 @@ The array can be turned into a polar or a circular array by changing its type.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Beziérova křivka
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1723,11 +1745,21 @@ CTRL to snap, SHIFT to constrain.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Bezier tools
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1785,11 +1817,25 @@ The resulting clone can be scaled in each of its three directions.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Cubic bezier curve
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2139,6 +2185,25 @@ It can also create an offset copy of the original object.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.
+
+ Draft_OrthoArray
+
+
+ Array
+ Pole
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+
+
Draft_PathArray
@@ -2853,14 +2918,6 @@ Once the object is created double click it in the tree view to restore the camer
Then you can use it to save a different camera position and objects' states any time you need.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Skupina
-
-
ImportAirfoilDAT
@@ -2929,6 +2986,11 @@ Then you can use it to save a different camera position and objects' states any
Arc tools
Nástroje oblouků
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3077,16 +3139,16 @@ Then you can use it to save a different camera position and objects' states any
Auto
Automaticky
-
-
- active command:
- aktivní příkaz:
-
None
Žádný
+
+
+ active command:
+ aktivní příkaz:
+
Active Draft command
@@ -4181,6 +4243,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Merging layer:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -5026,8 +5093,8 @@ Chcete umožnit FreeCADu stáhnout tyto knihovny?
- Bezier curve has been closed
- Bezier curve has been closed
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5049,6 +5116,11 @@ Chcete umožnit FreeCADu stáhnout tyto knihovny?
Click and drag to define next knot
Click and drag to define next knot
+
+
+ Bezier curve has been closed
+ Bezier curve has been closed
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5389,6 +5461,11 @@ Chcete umožnit FreeCADu stáhnout tyto knihovny?
Group name
Group name
+
+
+ Group
+ Skupina
+
Select an object to offset
@@ -5550,6 +5627,14 @@ The final angle will be the base angle plus this amount.
successfully exported
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Skupina
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_de.qm b/src/Mod/Draft/Resources/translations/Draft_de.qm
index 43cfd24ed7..31b9d1d51c 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_de.qm and b/src/Mod/Draft/Resources/translations/Draft_de.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_de.ts b/src/Mod/Draft/Resources/translations/Draft_de.ts
index 5e0a79d51d..e84914ea4b 100644
--- a/src/Mod/Draft/Resources/translations/Draft_de.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_de.ts
@@ -720,11 +720,6 @@ Diese Eigenschaft ist nur lesbar, da die Zahl von den Punkten im 'Punkt Objekt'
Area of this object
Bereich dieses Objekts
-
-
- The shape of this object
- Die Form dieses Objekts
-
The base object used by this object
@@ -735,6 +730,11 @@ Diese Eigenschaft ist nur lesbar, da die Zahl von den Punkten im 'Punkt Objekt'
The PAT file used by this object
Die von diesem Objekt verwendete PAT-Datei
+
+
+ The shape of this object
+ Die Form dieses Objekts
+
The pattern name used by this object
@@ -1143,6 +1143,16 @@ beyond the dimension line
Line color
Linienfarbe
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1580,7 +1590,7 @@ Erstelle zuerst eine Gruppe, um dieses Werkzeug zu verwenden.
Manage or create annotation styles
- Manage or create annotation styles
+ Verwalten oder Erstellen von Anmerkungsstilen
@@ -1634,8 +1644,8 @@ CTRL to snap, SHIFT to constrain.
Creates a circular arc by picking 3 points.
CTRL to snap, SHIFT to constrain.
- Creates a circular arc by picking 3 points.
-CTRL to snap, SHIFT to constrain.
+ Erstellt einen Kreisbogen, durch Anwahl von 3 Punkten.
+STRG zum Einrasten, SHIFT zum Einschränken.
@@ -1709,11 +1719,23 @@ Die Anordnung kann in eine orthogonale oder polare Anordnung durch ändern des T
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Bézier-Kurve
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1724,11 +1746,21 @@ STRG zum Einrasten, SHIFT zum Einschränken.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Bézierwerkzeuge
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1786,11 +1818,25 @@ Der resultierende Klon kann in jeder seiner drei Richtungen skaliert werden.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Kubische Bezierkurve
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2139,6 +2185,25 @@ Es kann auch eine Versatzkopie des Originalobjekts erstellt werden.
STRG zum Einrasten, SHIFT zum Einschränken. Halte ALT gedrückt und klicke, um bei jedem Klick eine Kopie zu erstellen.
+
+ Draft_OrthoArray
+
+
+ Array
+ Anordnung
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Erstellt Kopien des ausgewählten Objekts und platziert die Kopien in einem orthogonalen Muster.
+Das bedeutet, dass die Kopien in der angegebenen Richtung in den X-Y, Z-Achsen folgen.
+
+Die Anordnung kann in eine orthogonale oder polare Anordnung durch ändern des Typs umgewandelt werden.
+
+
Draft_PathArray
@@ -2848,14 +2913,6 @@ Sobald das Objekt erstellt wurde, doppelklicke in der Baumansicht darauf, um die
Danach kannst Du damit jederzeit eine andere Kameraposition und Objektzustände speichern.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Gruppe
-
-
ImportAirfoilDAT
@@ -2924,6 +2981,11 @@ Danach kannst Du damit jederzeit eine andere Kameraposition und Objektzustände
Arc tools
Bogenwerkzeuge
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3072,16 +3134,16 @@ Danach kannst Du damit jederzeit eine andere Kameraposition und Objektzustände
Auto
Automatisch
-
-
- active command:
- aktiver Befehl:
-
None
Kein
+
+
+ active command:
+ aktiver Befehl:
+
Active Draft command
@@ -4174,6 +4236,11 @@ Nicht verfügbar, wenn die Option "Primitive Teile verwenden" aktiviert istMerging layer:
Zusammenführungsebene:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -4187,7 +4254,7 @@ Nicht verfügbar, wenn die Option "Primitive Teile verwenden" aktiviert ist
Unable to convert input into a scale factor
- Unable to convert input into a scale factor
+ Eingabe konnte nicht in einen Skalierungsfaktor umgewandelt werden
@@ -4197,7 +4264,7 @@ Nicht verfügbar, wenn die Option "Primitive Teile verwenden" aktiviert ist
Set custom scale
- Set custom scale
+ Benutzerdefinierter Maßstab festlegen
@@ -4207,7 +4274,7 @@ Nicht verfügbar, wenn die Option "Primitive Teile verwenden" aktiviert ist
Set the scale used by draft annotation tools
- Set the scale used by draft annotation tools
+ Maßstab für die Draft Anmerkungswerkzeuge festlegen
@@ -4297,77 +4364,77 @@ Nicht verfügbar, wenn die Option "Primitive Teile verwenden" aktiviert ist
Snap Lock
- Snap Lock
+ Fangsperre
Snap Endpoint
- Snap Endpoint
+ Endpunkt fangen
Snap Midpoint
- Snap Midpoint
+ Mittelpunkt fangen
Snap Center
- Snap Center
+ Zentrum fangen
Snap Angle
- Snap Angle
+ Winkel fangen
Snap Intersection
- Snap Intersection
+ Schnittpunkt fangen
Snap Perpendicular
- Snap Perpendicular
+ Senkrecht fangen
Snap Extension
- Snap Extension
+ Fang-Erweiterung
Snap Parallel
- Snap Parallel
+ Parallel fangen
Snap Special
- Snap Special
+ Fangen Spezial
Snap Near
- Snap Near
+ Fangen in der Nähe
Snap Ortho
- Snap Ortho
+ Orthogonal fangen
Snap Grid
- Snap Grid
+ Raster fangen
Snap WorkingPlane
- Snap WorkingPlane
+ Fangen WorkingPlane
Snap Dimensions
- Snap Dimensions
+ Fang Bemaßung
@@ -5004,12 +5071,12 @@ Antworten Sie mit "Ja", um FreeCAD den automatischen Download der Bibliotheken z
(ON)
- (ON)
+ (EIN)
(OFF)
- (OFF)
+ (AUS)
@@ -5018,8 +5085,8 @@ Antworten Sie mit "Ja", um FreeCAD den automatischen Download der Bibliotheken z
- Bezier curve has been closed
- Bézierkurve wurde geschlossen
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5041,6 +5108,11 @@ Antworten Sie mit "Ja", um FreeCAD den automatischen Download der Bibliotheken z
Click and drag to define next knot
Klicken und ziehen, um den nächsten Knoten zu definieren
+
+
+ Bezier curve has been closed
+ Bézierkurve wurde geschlossen
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5381,6 +5453,11 @@ Antworten Sie mit "Ja", um FreeCAD den automatischen Download der Bibliotheken z
Group name
Gruppenname
+
+
+ Group
+ Gruppe
+
Select an object to offset
@@ -5542,6 +5619,14 @@ Der endgültige Winkel ist der Basiswinkel plus dieser Betrag.
erfolgreich exportiert
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Gruppe
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_el.qm b/src/Mod/Draft/Resources/translations/Draft_el.qm
index c6735db21f..83a711d2f0 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_el.qm and b/src/Mod/Draft/Resources/translations/Draft_el.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_el.ts b/src/Mod/Draft/Resources/translations/Draft_el.ts
index d92d20b778..58cdc23327 100644
--- a/src/Mod/Draft/Resources/translations/Draft_el.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_el.ts
@@ -722,11 +722,6 @@ This property is read-only, as the number depends on the points contained within
Area of this object
Area of this object
-
-
- The shape of this object
- Το σχήμα αυτού του αντικειμένου
-
The base object used by this object
@@ -737,6 +732,11 @@ This property is read-only, as the number depends on the points contained within
The PAT file used by this object
The PAT file used by this object
+
+
+ The shape of this object
+ Το σχήμα αυτού του αντικειμένου
+
The pattern name used by this object
@@ -1147,6 +1147,16 @@ beyond the dimension line
Line color
Χρώμα γραμμής
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1586,7 +1596,7 @@ Create a group first to use this tool.
Manage or create annotation styles
- Manage or create annotation styles
+ Διαχείριση ή δημιουργία στυλ σχολίων
@@ -1641,8 +1651,8 @@ CTRL to snap, SHIFT to constrain.
Creates a circular arc by picking 3 points.
CTRL to snap, SHIFT to constrain.
- Creates a circular arc by picking 3 points.
-CTRL to snap, SHIFT to constrain.
+ Δημιουργεί ένα κυκλικό τόξο επιλέγοντας 3 σημεία.
+CTRL για προσκόλληση, SHIFT για περιορισμό.
@@ -1716,11 +1726,23 @@ The array can be turned into a polar or a circular array by changing its type.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Bezier curve
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1731,11 +1753,21 @@ CTRL to snap, SHIFT to constrain.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Bezier tools
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1793,11 +1825,25 @@ The resulting clone can be scaled in each of its three directions.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Cubic bezier curve
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2147,6 +2193,25 @@ It can also create an offset copy of the original object.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.
+
+ Draft_OrthoArray
+
+
+ Array
+ Διάταξη
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+
+
Draft_PathArray
@@ -2861,14 +2926,6 @@ Once the object is created double click it in the tree view to restore the camer
Then you can use it to save a different camera position and objects' states any time you need.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Ομάδα
-
-
ImportAirfoilDAT
@@ -2937,6 +2994,11 @@ Then you can use it to save a different camera position and objects' states any
Arc tools
Arc tools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3085,16 +3147,16 @@ Then you can use it to save a different camera position and objects' states any
Auto
Αυτόματο
-
-
- active command:
- ενεργή εντολή:
-
None
Κανένα
+
+
+ active command:
+ ενεργή εντολή:
+
Active Draft command
@@ -4189,6 +4251,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Merging layer:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -4202,7 +4269,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Unable to convert input into a scale factor
- Unable to convert input into a scale factor
+ Δεν είναι δυνατή η μετατροπή της εισόδου σε συντελεστή κλίμακας
@@ -4212,7 +4279,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Set custom scale
- Set custom scale
+ Ορισμός προσαρμοσμένης κλίμακας
@@ -4222,7 +4289,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Set the scale used by draft annotation tools
- Set the scale used by draft annotation tools
+ Ορισμός της κλίμακας που χρησιμοποιείται από τα εργαλεία σχολιασμού σχεδίων
@@ -4312,12 +4379,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Snap Lock
- Snap Lock
+ Κλείδωμα προσκόλλησης
Snap Endpoint
- Snap Endpoint
+ Προσκόλληση τελικού σημείου
@@ -5035,8 +5102,8 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
- Bezier curve has been closed
- Bezier curve has been closed
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5058,6 +5125,11 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
Click and drag to define next knot
Click and drag to define next knot
+
+
+ Bezier curve has been closed
+ Bezier curve has been closed
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5398,6 +5470,11 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
Group name
Group name
+
+
+ Group
+ Ομάδα
+
Select an object to offset
@@ -5559,6 +5636,14 @@ The final angle will be the base angle plus this amount.
successfully exported
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Ομάδα
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_es-AR.qm b/src/Mod/Draft/Resources/translations/Draft_es-AR.qm
index 5ebeb88ece..45de8bf606 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_es-AR.qm and b/src/Mod/Draft/Resources/translations/Draft_es-AR.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_es-AR.ts b/src/Mod/Draft/Resources/translations/Draft_es-AR.ts
index f39766cf2e..84abfce1fc 100644
--- a/src/Mod/Draft/Resources/translations/Draft_es-AR.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_es-AR.ts
@@ -721,11 +721,6 @@ Esta propiedad es de solo lectura, así que el número depende de los puntos con
Area of this object
Área de este objeto
-
-
- The shape of this object
- La forma de este objeto
-
The base object used by this object
@@ -736,6 +731,11 @@ Esta propiedad es de solo lectura, así que el número depende de los puntos con
The PAT file used by this object
Ruta usada por este objeto
+
+
+ The shape of this object
+ La forma de este objeto
+
The pattern name used by this object
@@ -754,7 +754,7 @@ Esta propiedad es de solo lectura, así que el número depende de los puntos con
If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces)
- Ajustado a Falso, la trama es aplicado como es a las caras, sin traslación (esto puede dar malos resultados en caras no-ortogonales)
+ Si se establece en False, el rayado se aplica como es a las caras, sin traslación (esto podría dar resultados incorrectos para caras que no sean ortogonales)
@@ -804,7 +804,7 @@ Deja esta propiedad vacía para crear copias a lo largo del 'Objeto Ruta'.
Additional translation that will be applied to each copy.
This is useful to adjust for the difference between shape centre and shape reference point.
- Traducción adicional que se aplicará a cada copia.
+ Traslación adicional que será aplicada a cada copia.
Esto es útil para ajustar la diferencia entre el centro de la forma y el punto de referencia de la forma.
@@ -1146,6 +1146,16 @@ más allá de la línea de dimensión
Line color
Color de línea
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1585,7 +1595,7 @@ Crea un grupo primero para usar esta herramienta.
Manage or create annotation styles
- Manage or create annotation styles
+ Administrar o crear estilos de anotación
@@ -1715,11 +1725,23 @@ La matriz puede convertirse en una matriz polar o circular cambiando su tipo.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Curva Bézier
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1730,11 +1752,21 @@ CTRL para cortar, MAYÚS para restringir.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Herramientas Bézier
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1792,11 +1824,25 @@ El clon resultante puede escalarse en cada una de sus tres direcciones.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Curva de Bézier cúbica
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2146,6 +2192,25 @@ También puede crear una copia de desplazamiento del objeto original.
CTRL para ajustar, MAYÚS para restringir. Mantenga presionado ALT y haga clic para crear una copia con cada clic.
+
+ Draft_OrthoArray
+
+
+ Array
+ Matriz
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Crea copias del objeto seleccionado y coloca las copias en un patrón ortogonal,
+lo que significa que las copias siguen la dirección especificada en los ejes X, Y, Z.
+
+La matriz puede convertirse en una matriz polar o circular cambiando su tipo.
+
+
Draft_PathArray
@@ -2859,14 +2924,6 @@ Una vez creado el objeto haga doble clic en él en la vista de árbol para resta
Entonces puedes usarlo para guardar una posición diferente de la cámara y estados de los objetos cuando lo necesites.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Grupo
-
-
ImportAirfoilDAT
@@ -2935,6 +2992,11 @@ Entonces puedes usarlo para guardar una posición diferente de la cámara y esta
Arc tools
Herramientas de arco
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3083,16 +3145,16 @@ Entonces puedes usarlo para guardar una posición diferente de la cámara y esta
Auto
Automático
-
-
- active command:
- comando activo:
-
None
Ninguno
+
+
+ active command:
+ comando activo:
+
Active Draft command
@@ -4184,6 +4246,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Combinando capa:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -5029,8 +5096,8 @@ Para habilitar FreeCAD para descargar estas bibliotecas, responda Sí.
- Bezier curve has been closed
- La curva Bezier ha sido cerrada
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5052,6 +5119,11 @@ Para habilitar FreeCAD para descargar estas bibliotecas, responda Sí.Click and drag to define next knot
Haga clic y arrastre para definir el siguiente nudo
+
+
+ Bezier curve has been closed
+ La curva Bezier ha sido cerrada
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5392,6 +5464,11 @@ Para habilitar FreeCAD para descargar estas bibliotecas, responda Sí.Group name
Nombre del grupo
+
+
+ Group
+ Grupo
+
Select an object to offset
@@ -5553,6 +5630,14 @@ El ángulo final será el ángulo base más esta cantidad.
exportado con éxito
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Grupo
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.qm b/src/Mod/Draft/Resources/translations/Draft_es-ES.qm
index 667c35fd80..f06f9fa4e3 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_es-ES.qm and b/src/Mod/Draft/Resources/translations/Draft_es-ES.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts
index aa06f5b2ab..d097295299 100644
--- a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts
@@ -721,11 +721,6 @@ Esta propiedad es de solo lectura, así que el número depende de los puntos con
Area of this object
Área de este objeto
-
-
- The shape of this object
- La forma de este objeto
-
The base object used by this object
@@ -736,6 +731,11 @@ Esta propiedad es de solo lectura, así que el número depende de los puntos con
The PAT file used by this object
Ruta usada por este objeto
+
+
+ The shape of this object
+ La forma de este objeto
+
The pattern name used by this object
@@ -1146,6 +1146,16 @@ más allá de la línea de dimensión
Line color
Color de línea
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1585,7 +1595,7 @@ Crea un grupo primero para usar esta herramienta.
Manage or create annotation styles
- Manage or create annotation styles
+ Administrar o crear estilos de anotación
@@ -1715,11 +1725,23 @@ La matriz puede convertirse en una matriz polar o circular cambiando su tipo.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Curva Bézier
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1730,11 +1752,21 @@ CTRL para cortar, MAYÚS para restringir.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Herramientas Bézier
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1792,11 +1824,25 @@ El clon resultante puede escalarse en cada una de sus tres direcciones.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Curva de Bézier cúbica
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2146,6 +2192,25 @@ También puede crear una copia de desplazamiento del objeto original.
CTRL para ajustar, MAYÚS para restringir. Mantenga presionado ALT y haga clic para crear una copia con cada clic.
+
+ Draft_OrthoArray
+
+
+ Array
+ Matriz
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Crea copias del objeto seleccionado y coloca las copias en un patrón ortogonal,
+lo que significa que las copias siguen la dirección especificada en los ejes X, Y, Z.
+
+La matriz puede convertirse en una matriz polar o circular cambiando su tipo.
+
+
Draft_PathArray
@@ -2859,14 +2924,6 @@ Una vez creado el objeto haga doble clic en él en la vista de árbol para resta
Entonces puedes usarlo para guardar una posición diferente de la cámara y estados de los objetos cuando lo necesites.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Grupo
-
-
ImportAirfoilDAT
@@ -2935,6 +2992,11 @@ Entonces puedes usarlo para guardar una posición diferente de la cámara y esta
Arc tools
Herramientas de arco
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3083,16 +3145,16 @@ Entonces puedes usarlo para guardar una posición diferente de la cámara y esta
Auto
Auto
-
-
- active command:
- Comando activo:
-
None
Ninguno
+
+
+ active command:
+ Comando activo:
+
Active Draft command
@@ -4184,6 +4246,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Combinando capa:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -5028,8 +5095,8 @@ Para habilitar a FreeCAD la descarga de estas bibliotecas, responder Si.
- Bezier curve has been closed
- La curva Bezier ha sido cerrada
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5051,6 +5118,11 @@ Para habilitar a FreeCAD la descarga de estas bibliotecas, responder Si.Click and drag to define next knot
Haga clic y arrastre para definir el siguiente nudo
+
+
+ Bezier curve has been closed
+ La curva Bezier ha sido cerrada
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5391,6 +5463,11 @@ Para habilitar a FreeCAD la descarga de estas bibliotecas, responder Si.Group name
Nombre del grupo
+
+
+ Group
+ Grupo
+
Select an object to offset
@@ -5552,6 +5629,14 @@ El ángulo final será el ángulo base más esta cantidad.
exportado con éxito
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Grupo
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.qm b/src/Mod/Draft/Resources/translations/Draft_eu.qm
index eba2d8f020..cea75e9801 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_eu.qm and b/src/Mod/Draft/Resources/translations/Draft_eu.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.ts b/src/Mod/Draft/Resources/translations/Draft_eu.ts
index 6f733084b2..aea1d21e5c 100644
--- a/src/Mod/Draft/Resources/translations/Draft_eu.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_eu.ts
@@ -719,11 +719,6 @@ Propietate hau irakurtzeko soilik da, kopuru hori 'Puntu-objektua' elementuak di
Area of this object
Objektuaren area
-
-
- The shape of this object
- Objektu honen forma
-
The base object used by this object
@@ -734,6 +729,11 @@ Propietate hau irakurtzeko soilik da, kopuru hori 'Puntu-objektua' elementuak di
The PAT file used by this object
Objektu honek darabilen PAT fitxategia
+
+
+ The shape of this object
+ Objektu honen forma
+
The pattern name used by this object
@@ -1144,6 +1144,16 @@ haratago duen luzera
Line color
Lerro-kolorea
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1713,11 +1723,23 @@ Matrizearen mota aldatu daiteke, polarra edo zirkularra izan dadin.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Bezier kurba
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1728,11 +1750,21 @@ Ctrl atxikitzeko, Shift murrizteko.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Bezier tresnak
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1790,11 +1822,25 @@ Sortutako klona hiru norabideetan eskalatu daiteke.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Bezier kurba kubikoa
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2144,6 +2190,25 @@ Jatorrizko objektuaren kopia desplazatu bat ere sortu dezake.
Ctrl atxikitzeko, Shift murrizteko. Eutsi Alt sakatuta eta egin klik kopia bat sortzeko klik bakoitzean.
+
+ Draft_OrthoArray
+
+
+ Array
+ Matrizea
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Hautatutako objektuaren kopiak sortzen ditu, eta kopiak eredu ortogonal bati
+jarraituta kokatzen ditu, kopiek X, Y, Z ardatzetan zehaztutako norabidea jarraitu dezaten.
+
+Matrizearen mota aldatu daiteke, polarra edo zirkularra izan dadin.
+
+
Draft_PathArray
@@ -2860,14 +2925,6 @@ Objektua sortu ondoren, egin klik bikoitza zuhaitz-bistan kameraren kokapena eta
Ondoren, kameraren kokapen desberdina eta objektuen egoera desberdinak gorde daitezke bertan, behar direnerako.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Taldea
-
-
ImportAirfoilDAT
@@ -2936,6 +2993,11 @@ Ondoren, kameraren kokapen desberdina eta objektuen egoera desberdinak gorde dai
Arc tools
Arku-tresnak
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3084,16 +3146,16 @@ Ondoren, kameraren kokapen desberdina eta objektuen egoera desberdinak gorde dai
Auto
Automatikoa
-
-
- active command:
- Komando aktiboa:
-
None
Bat ere ez
+
+
+ active command:
+ Komando aktiboa:
+
Active Draft command
@@ -4188,6 +4250,11 @@ Ez dago erabilgarri zirriborroen 'Erabili piezen jatorrizkoak' aukera gaituta ba
Merging layer:
Fusionatuko den geruza:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -5034,8 +5101,8 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.
- Bezier curve has been closed
- Bezier kurba itxi da
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5057,6 +5124,11 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Click and drag to define next knot
Klik eta arrastatu hurrengo adabegia definitzeko
+
+
+ Bezier curve has been closed
+ Bezier kurba itxi da
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5397,6 +5469,11 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Group name
Group name
+
+
+ Group
+ Taldea
+
Select an object to offset
@@ -5558,6 +5635,14 @@ Amaierako angelua izango da oinarriko angelua gehi kantitate hau.
ongi esportatu da
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Taldea
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.qm b/src/Mod/Draft/Resources/translations/Draft_fi.qm
index 205966b8a0..9f531ad787 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_fi.qm and b/src/Mod/Draft/Resources/translations/Draft_fi.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.ts b/src/Mod/Draft/Resources/translations/Draft_fi.ts
index 6158b7c252..1019b3b30b 100644
--- a/src/Mod/Draft/Resources/translations/Draft_fi.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_fi.ts
@@ -712,11 +712,6 @@ This property is read-only, as the number depends on the points contained within
Area of this object
Tämän kohteen pinta-ala
-
-
- The shape of this object
- Tämän objektin muoto
-
The base object used by this object
@@ -727,6 +722,11 @@ This property is read-only, as the number depends on the points contained within
The PAT file used by this object
The PAT file used by this object
+
+
+ The shape of this object
+ Tämän objektin muoto
+
The pattern name used by this object
@@ -1137,6 +1137,16 @@ mittajanan jälkeen
Line color
Viivan väri
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1706,11 +1716,23 @@ The array can be turned into a polar or a circular array by changing its type.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Bezier curve
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1721,11 +1743,21 @@ CTRL to snap, SHIFT to constrain.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Bezier tools
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1783,11 +1815,25 @@ The resulting clone can be scaled in each of its three directions.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Cubic bezier curve
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2137,6 +2183,25 @@ It can also create an offset copy of the original object.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.
+
+ Draft_OrthoArray
+
+
+ Array
+ Taulukko
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+
+
Draft_PathArray
@@ -2851,14 +2916,6 @@ Once the object is created double click it in the tree view to restore the camer
Then you can use it to save a different camera position and objects' states any time you need.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Ryhmä
-
-
ImportAirfoilDAT
@@ -2927,6 +2984,11 @@ Then you can use it to save a different camera position and objects' states any
Arc tools
Arc tools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3075,16 +3137,16 @@ Then you can use it to save a different camera position and objects' states any
Auto
Automaattinen
-
-
- active command:
- aktiivinen komento:
-
None
Ei mitään
+
+
+ active command:
+ aktiivinen komento:
+
Active Draft command
@@ -4179,6 +4241,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Merging layer:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -4202,7 +4269,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Set custom scale
- Set custom scale
+ Määritä oma skaalaus
@@ -4302,77 +4369,77 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Snap Lock
- Snap Lock
+ Kiinnityksen lukitus
Snap Endpoint
- Snap Endpoint
+ Kiinnitä loppupisteeseen
Snap Midpoint
- Snap Midpoint
+ Kiinnitä keskipisteeseen
Snap Center
- Snap Center
+ Kiinnitä keskustaan
Snap Angle
- Snap Angle
+ Kiinnitä kulmaan
Snap Intersection
- Snap Intersection
+ Kiinnitä leikkaukseen
Snap Perpendicular
- Snap Perpendicular
+ Kiinnitä kohtisuoraan
Snap Extension
- Snap Extension
+ Kiinnitä laajennukseen
Snap Parallel
- Snap Parallel
+ Kiinnitä rinnakkaisesti
Snap Special
- Snap Special
+ Kiinnitä erityinen
Snap Near
- Snap Near
+ Kiinnitä lähelle
Snap Ortho
- Snap Ortho
+ Kiinnitä ortho
Snap Grid
- Snap Grid
+ Kiinnitä ruudukkoon
Snap WorkingPlane
- Snap WorkingPlane
+ Kiinnitä työalueeseen
Snap Dimensions
- Snap Dimensions
+ Kiinnitä mittoihin
@@ -5011,12 +5078,12 @@ To enabled FreeCAD to download these libraries, answer Yes.
(ON)
- (ON)
+ (PÄÄLLÄ)
(OFF)
- (OFF)
+ (POIS)
@@ -5025,8 +5092,8 @@ To enabled FreeCAD to download these libraries, answer Yes.
- Bezier curve has been closed
- Bezier curve has been closed
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5048,6 +5115,11 @@ To enabled FreeCAD to download these libraries, answer Yes.
Click and drag to define next knot
Click and drag to define next knot
+
+
+ Bezier curve has been closed
+ Bezier curve has been closed
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5388,6 +5460,11 @@ To enabled FreeCAD to download these libraries, answer Yes.
Group name
Group name
+
+
+ Group
+ Ryhmä
+
Select an object to offset
@@ -5549,6 +5626,14 @@ The final angle will be the base angle plus this amount.
successfully exported
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Ryhmä
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_fil.qm b/src/Mod/Draft/Resources/translations/Draft_fil.qm
index 1828d61f54..f5becdfff5 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_fil.qm and b/src/Mod/Draft/Resources/translations/Draft_fil.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_fil.ts b/src/Mod/Draft/Resources/translations/Draft_fil.ts
index 7938ea8da3..b8ca95adc7 100644
--- a/src/Mod/Draft/Resources/translations/Draft_fil.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_fil.ts
@@ -722,11 +722,6 @@ This property is read-only, as the number depends on the points contained within
Area of this object
Area of this object
-
-
- The shape of this object
- The shape of this object
-
The base object used by this object
@@ -737,6 +732,11 @@ This property is read-only, as the number depends on the points contained within
The PAT file used by this object
The PAT file used by this object
+
+
+ The shape of this object
+ The shape of this object
+
The pattern name used by this object
@@ -1147,6 +1147,16 @@ beyond the dimension line
Line color
Kulay ng linya
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1716,11 +1726,23 @@ The array can be turned into a polar or a circular array by changing its type.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Bezier curve
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1731,11 +1753,21 @@ CTRL to snap, SHIFT to constrain.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Bezier tools
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1793,11 +1825,25 @@ The resulting clone can be scaled in each of its three directions.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Cubic bezier curve
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2147,6 +2193,25 @@ It can also create an offset copy of the original object.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.
+
+ Draft_OrthoArray
+
+
+ Array
+ Tanghal
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+
+
Draft_PathArray
@@ -2862,14 +2927,6 @@ Once the object is created double click it in the tree view to restore the camer
Then you can use it to save a different camera position and objects' states any time you need.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Grupo
-
-
ImportAirfoilDAT
@@ -2938,6 +2995,11 @@ Then you can use it to save a different camera position and objects' states any
Arc tools
Arc tools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3086,16 +3148,16 @@ Then you can use it to save a different camera position and objects' states any
Auto
Kusa
-
-
- active command:
- aktibong command:
-
None
Wala
+
+
+ active command:
+ aktibong command:
+
Active Draft command
@@ -4191,6 +4253,11 @@ Pampook na x
Merging layer:
Merging layer:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -5037,8 +5104,8 @@ Upang ma-enable ang FreeCAD upang kupyahin ang mga aklatang ito, sagutin ang Oo.
- Bezier curve has been closed
- Bezier curve has been closed
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5060,6 +5127,11 @@ Upang ma-enable ang FreeCAD upang kupyahin ang mga aklatang ito, sagutin ang Oo.
Click and drag to define next knot
Click and drag to define next knot
+
+
+ Bezier curve has been closed
+ Bezier curve has been closed
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5400,6 +5472,11 @@ Upang ma-enable ang FreeCAD upang kupyahin ang mga aklatang ito, sagutin ang Oo.
Group name
Group name
+
+
+ Group
+ Grupo
+
Select an object to offset
@@ -5561,6 +5638,14 @@ The final angle will be the base angle plus this amount.
successfully exported
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Grupo
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.qm b/src/Mod/Draft/Resources/translations/Draft_fr.qm
index fa7456560d..d10ee8ede3 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_fr.qm and b/src/Mod/Draft/Resources/translations/Draft_fr.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.ts b/src/Mod/Draft/Resources/translations/Draft_fr.ts
index 66d3fd5da1..7d2c1eee72 100644
--- a/src/Mod/Draft/Resources/translations/Draft_fr.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_fr.ts
@@ -713,11 +713,6 @@ Cette propriété est en lecture seule, car le nombre dépend des points contenu
Area of this object
Surface de cet élément
-
-
- The shape of this object
- La forme de cet objet
-
The base object used by this object
@@ -728,6 +723,11 @@ Cette propriété est en lecture seule, car le nombre dépend des points contenu
The PAT file used by this object
Le fichier PAT utilisé par cet objet
+
+
+ The shape of this object
+ La forme de cet objet
+
The pattern name used by this object
@@ -1137,6 +1137,16 @@ au-delà de la ligne de cote
Line color
Couleur de ligne
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1574,7 +1584,7 @@ Créez d'abord un groupe pour utiliser cet outil.
Manage or create annotation styles
- Manage or create annotation styles
+ Gérer ou créer des styles d'annotation
@@ -1628,8 +1638,7 @@ CTRL to snap, SHIFT to constrain.
Creates a circular arc by picking 3 points.
CTRL to snap, SHIFT to constrain.
- Creates a circular arc by picking 3 points.
-CTRL to snap, SHIFT to constrain.
+ Crée un arc en désignant 3 points. Ctrl pour aimanter, Majuscule pour contraindre.
@@ -1703,11 +1712,23 @@ Le réseau peut être transformé en réseau polaire ou circulaire en changeant
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Courbe de Bézier
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1718,11 +1739,21 @@ CTRL pour aimanter, MAJ pour contraindre.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Outils Bézier
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1780,11 +1811,25 @@ Le clone résultant peut être mis à l'échelle dans chacune de ses trois direc
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Courbe de Bézier cubique
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2134,6 +2179,25 @@ Il peut également créer une copie décalée de l'objet original.
CTRL pour aimanter, MAJ pour contraindre. Maintenez ALT et cliquez pour créer une copie à chaque clic.
+
+ Draft_OrthoArray
+
+
+ Array
+ Réseau
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Crée des copies de l'objet sélectionné et place les copies dans un motif orthogonal,
+ce qui signifie que les copies suivent la direction spécifiée dans les axes X, Y, Z.
+
+Le réseau peut être transformé en réseau polaire ou circulaire en changeant son type.
+
+
Draft_PathArray
@@ -2848,14 +2912,6 @@ Une fois que l'objet est créé, double-cliquez dessus dans l'arborescence pour
Vous pouvez ensuite l'utiliser pour enregistrer une position différente de la caméra et l'état des objets à tout moment.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Groupe
-
-
ImportAirfoilDAT
@@ -2924,6 +2980,11 @@ Vous pouvez ensuite l'utiliser pour enregistrer une position différente de la c
Arc tools
Outils Arc
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3072,16 +3133,16 @@ Vous pouvez ensuite l'utiliser pour enregistrer une position différente de la c
Auto
Plan de travail
-
-
- active command:
- commande active :
-
None
Aucun
+
+
+ active command:
+ commande active :
+
Active Draft command
@@ -4175,6 +4236,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Fusion du calque :
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -4188,7 +4254,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Unable to convert input into a scale factor
- Unable to convert input into a scale factor
+ Impossible de convertir l'entrée en un facteur d'échelle
@@ -4198,7 +4264,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Set custom scale
- Set custom scale
+ Définir une échelle personnalisée
@@ -5000,12 +5066,12 @@ To enabled FreeCAD to download these libraries, answer Yes.
(ON)
- (ON)
+ (ON)
(OFF)
- (OFF)
+ (OFF)
@@ -5014,8 +5080,8 @@ To enabled FreeCAD to download these libraries, answer Yes.
- Bezier curve has been closed
- La courbe de Bézier a été fermée
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5037,6 +5103,11 @@ To enabled FreeCAD to download these libraries, answer Yes.
Click and drag to define next knot
Cliquez et faites glisser pour définir le nœud suivant
+
+
+ Bezier curve has been closed
+ La courbe de Bézier a été fermée
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5377,6 +5448,11 @@ To enabled FreeCAD to download these libraries, answer Yes.
Group name
Nom du groupe
+
+
+ Group
+ Groupe
+
Select an object to offset
@@ -5538,6 +5614,14 @@ L'angle final sera l'angle de base plus cette quantité.
exporté avec succès
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Groupe
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_gl.qm b/src/Mod/Draft/Resources/translations/Draft_gl.qm
index 60a3e2be38..f55f2eae48 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_gl.qm and b/src/Mod/Draft/Resources/translations/Draft_gl.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_gl.ts b/src/Mod/Draft/Resources/translations/Draft_gl.ts
index 4cbe043154..2971666b66 100644
--- a/src/Mod/Draft/Resources/translations/Draft_gl.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_gl.ts
@@ -722,11 +722,6 @@ This property is read-only, as the number depends on the points contained within
Area of this object
Area of this object
-
-
- The shape of this object
- A forma desde obxecto
-
The base object used by this object
@@ -737,6 +732,11 @@ This property is read-only, as the number depends on the points contained within
The PAT file used by this object
The PAT file used by this object
+
+
+ The shape of this object
+ A forma desde obxecto
+
The pattern name used by this object
@@ -1147,6 +1147,16 @@ beyond the dimension line
Line color
Cor de liña
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1716,11 +1726,23 @@ The array can be turned into a polar or a circular array by changing its type.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Bezier curve
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1731,11 +1753,21 @@ CTRL to snap, SHIFT to constrain.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Bezier tools
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1793,11 +1825,25 @@ The resulting clone can be scaled in each of its three directions.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Cubic bezier curve
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2147,6 +2193,25 @@ It can also create an offset copy of the original object.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.
+
+ Draft_OrthoArray
+
+
+ Array
+ Matriz
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+
+
Draft_PathArray
@@ -2861,14 +2926,6 @@ Once the object is created double click it in the tree view to restore the camer
Then you can use it to save a different camera position and objects' states any time you need.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Grupo
-
-
ImportAirfoilDAT
@@ -2937,6 +2994,11 @@ Then you can use it to save a different camera position and objects' states any
Arc tools
Arc tools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3085,16 +3147,16 @@ Then you can use it to save a different camera position and objects' states any
Auto
Automático
-
-
- active command:
- comando activo:
-
None
Ningún
+
+
+ active command:
+ comando activo:
+
Active Draft command
@@ -4189,6 +4251,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Merging layer:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -5033,8 +5100,8 @@ Para permitir o FreeCAD a descarga destas bibliotecas, responda Si.
- Bezier curve has been closed
- Bezier curve has been closed
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5056,6 +5123,11 @@ Para permitir o FreeCAD a descarga destas bibliotecas, responda Si.Click and drag to define next knot
Click and drag to define next knot
+
+
+ Bezier curve has been closed
+ Bezier curve has been closed
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5396,6 +5468,11 @@ Para permitir o FreeCAD a descarga destas bibliotecas, responda Si.Group name
Group name
+
+
+ Group
+ Grupo
+
Select an object to offset
@@ -5557,6 +5634,14 @@ The final angle will be the base angle plus this amount.
successfully exported
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Grupo
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.qm b/src/Mod/Draft/Resources/translations/Draft_hr.qm
index 2bcee1abd4..193593a3cb 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_hr.qm and b/src/Mod/Draft/Resources/translations/Draft_hr.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.ts b/src/Mod/Draft/Resources/translations/Draft_hr.ts
index 9de33bd4b0..b88c596ebc 100644
--- a/src/Mod/Draft/Resources/translations/Draft_hr.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_hr.ts
@@ -729,11 +729,6 @@ Ovo svojstvo je samo za čitanje, budući da broj ovisi o točkama sadržanim un
Area of this object
Područje ovog objekta
-
-
- The shape of this object
- Oblik ovog objekta
-
The base object used by this object
@@ -744,6 +739,11 @@ Ovo svojstvo je samo za čitanje, budući da broj ovisi o točkama sadržanim un
The PAT file used by this object
PAT datoteka korištena kod ovog objekta
+
+
+ The shape of this object
+ Oblik ovog objekta
+
The pattern name used by this object
@@ -1154,6 +1154,16 @@ izvan mjerne linije
Line color
Boja linije
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1595,7 +1605,7 @@ Prvo stvorite grupu da biste koristili ovaj alat.
Manage or create annotation styles
- Manage or create annotation styles
+ Upravljajte ili stvarajte stilove bilješki
@@ -1726,11 +1736,23 @@ Niz se može pretvoriti u polarni ili kružni niz promjenom njegovog tipa.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Bezierova krivulja
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1741,11 +1763,21 @@ CTRL za privući, SHIFT za ograničiti.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Bezier alati
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1803,11 +1835,25 @@ Rezultirajući klon može se skalirati u svakom od svoja tri smjera.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Kubična Bezierova krivulja
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2159,6 +2205,27 @@ CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each
Također može stvoriti pomak kopiju izvornog objekta.
CTRL za privuci, SHIFT za ograničiti. Držite ALT i kliknite za stvaranje kopije svakim klikom.
+
+
+
+
+ Draft_OrthoArray
+
+
+ Array
+ Polje
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Stvara kopije odabranog objekta i postavlja kopije u ortogonalni uzorak,
+što znači da kopije slijede navedeni smjer u X, Y, Z osi.
+
+Niz se može pretvoriti u polarni ili kružni niz promjenom njegovog tipa.
+
@@ -2884,14 +2951,6 @@ Nakon što je objekt stvoren, dvaput ga kliknite u prikazu stabla kako biste vra
Zatim ga možete koristiti za spremanje drugog položaja kamere i stanja objekata kad god vam zatreba.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Grupa
-
-
ImportAirfoilDAT
@@ -2960,6 +3019,11 @@ Zatim ga možete koristiti za spremanje drugog položaja kamere i stanja objekat
Arc tools
Alati luka
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3108,16 +3172,16 @@ Zatim ga možete koristiti za spremanje drugog položaja kamere i stanja objekat
Auto
Automatski
-
-
- active command:
- aktivna naredba:
-
None
Prazno
+
+
+ active command:
+ aktivna naredba:
+
Active Draft command
@@ -4218,6 +4282,11 @@ Nije dostupno ako je omogućena opcija 'Koristi se primitivni dio' postavki Nacr
Merging layer:
Spajnje sloja:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -5064,8 +5133,8 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).
- Bezier curve has been closed
- Bezierova krivulja je zatvorena
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5087,6 +5156,11 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Click and drag to define next knot
Kliknite i povucite za određivanje slijedećeg čvora
+
+
+ Bezier curve has been closed
+ Bezierova krivulja je zatvorena
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5427,6 +5501,11 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Group name
Naziv grupe
+
+
+ Group
+ Grupa
+
Select an object to offset
@@ -5588,6 +5667,14 @@ Konačni kut bit će osnovni kut plus ovaj iznos.
uspješno izvezeno
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Grupa
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.qm b/src/Mod/Draft/Resources/translations/Draft_hu.qm
index 0336421689..89b15279d0 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_hu.qm and b/src/Mod/Draft/Resources/translations/Draft_hu.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.ts b/src/Mod/Draft/Resources/translations/Draft_hu.ts
index e6b9a4c448..5829c9c95f 100644
--- a/src/Mod/Draft/Resources/translations/Draft_hu.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_hu.ts
@@ -720,11 +720,6 @@ Ez a tulajdonság csak olvasható, mert a szám a 'Pont tárgy' pontjaitól füg
Area of this object
A tárgy területe
-
-
- The shape of this object
- Ennek a tárgynak az alakja
-
The base object used by this object
@@ -735,6 +730,11 @@ Ez a tulajdonság csak olvasható, mert a szám a 'Pont tárgy' pontjaitól füg
The PAT file used by this object
A tárgy által használt PAT-fájl
+
+
+ The shape of this object
+ Ennek a tárgynak az alakja
+
The pattern name used by this object
@@ -1145,6 +1145,16 @@ a méretvonalon túl
Line color
Vonalszín
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1714,11 +1724,23 @@ Az elrendezés merőleges vagy poláris elrendezésre alakítható a típus megv
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Bezier -görbe
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1729,11 +1751,21 @@ CTRL illesztéshez, SHIFT a kényszerítéshez.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Bezier eszközök
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1791,11 +1823,25 @@ Az eredményül kapott klón mindhárom irányban méretezhető.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Köbös bezier görbe
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2144,6 +2190,25 @@ Létrehozhat egy eltolási másolatot is az eredeti tárgyról.
CTRL illesztéshez, SHIFT a kényszerítéshez. Tartsa az ALT billentyűt, és kattintson, ha minden kattintással másolatot szeretne létrehozni.
+
+ Draft_OrthoArray
+
+
+ Array
+ Sorba rendezés
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Másolatot készít a kijelölt tárgyról, és a másolatokat merőleges mintába helyezi.
+Ez azt jelenti, hogy a másolatok az X-Y, Z tengelyek megadott irányát követik.
+
+Az elrendezés merőleges vagy poláris elrendezésre alakítható a típus megváltoztatásával.
+
+
Draft_PathArray
@@ -2856,14 +2921,6 @@ A tárgy létrehozása után kattintson rá duplán a fa nézetben a kamera hely
Ezután használhatja különböző kamera helyzetek mentéséhez és a tárgyakat állapotát bármikor, amikor akarja.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Csoport
-
-
ImportAirfoilDAT
@@ -2932,6 +2989,11 @@ Ezután használhatja különböző kamera helyzetek mentéséhez és a tárgyak
Arc tools
Íveszközök
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3080,16 +3142,16 @@ Ezután használhatja különböző kamera helyzetek mentéséhez és a tárgyak
Auto
Automatikus
-
-
- active command:
- aktív parancs:
-
None
Egyik sem
+
+
+ active command:
+ aktív parancs:
+
Active Draft command
@@ -4184,6 +4246,11 @@ Nem érhető el, ha a 'Rész-primitívek használata' beállítás engedélyezve
Merging layer:
Réteg összeolvasztás:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -5030,8 +5097,8 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t.
- Bezier curve has been closed
- Bezier-görbe lezárásra került
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5053,6 +5120,11 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t.
Click and drag to define next knot
Fogd és vidd a következő csomópont meghatározásához
+
+
+ Bezier curve has been closed
+ Bezier-görbe lezárásra került
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5393,6 +5465,11 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t.
Group name
Csoportnév
+
+
+ Group
+ Csoport
+
Select an object to offset
@@ -5554,6 +5631,14 @@ A végső szög lesz az alapszög plusz ez az összege.
sikeresen exportálva
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Csoport
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_id.qm b/src/Mod/Draft/Resources/translations/Draft_id.qm
index 1690749229..03d1a4bb29 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_id.qm and b/src/Mod/Draft/Resources/translations/Draft_id.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_id.ts b/src/Mod/Draft/Resources/translations/Draft_id.ts
index c3369060fc..305331a6b6 100644
--- a/src/Mod/Draft/Resources/translations/Draft_id.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_id.ts
@@ -722,11 +722,6 @@ This property is read-only, as the number depends on the points contained within
Area of this object
Area of this object
-
-
- The shape of this object
- Bentuk dari objek ini
-
The base object used by this object
@@ -737,6 +732,11 @@ This property is read-only, as the number depends on the points contained within
The PAT file used by this object
The PAT file used by this object
+
+
+ The shape of this object
+ Bentuk dari objek ini
+
The pattern name used by this object
@@ -1147,6 +1147,16 @@ beyond the dimension line
Line color
Line warna
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1714,11 +1724,23 @@ The array can be turned into a polar or a circular array by changing its type.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Bezier curve
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1729,11 +1751,21 @@ CTRL to snap, SHIFT to constrain.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Bezier tools
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1791,11 +1823,25 @@ The resulting clone can be scaled in each of its three directions.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Cubic bezier curve
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2145,6 +2191,25 @@ It can also create an offset copy of the original object.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.
+
+ Draft_OrthoArray
+
+
+ Array
+ Array
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+
+
Draft_PathArray
@@ -2859,14 +2924,6 @@ Once the object is created double click it in the tree view to restore the camer
Then you can use it to save a different camera position and objects' states any time you need.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Kelompok
-
-
ImportAirfoilDAT
@@ -2935,6 +2992,11 @@ Then you can use it to save a different camera position and objects' states any
Arc tools
Arc tools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3083,16 +3145,16 @@ Then you can use it to save a different camera position and objects' states any
Auto
Mobil
-
-
- active command:
- perintah aktif:
-
None
Tidak ada
+
+
+ active command:
+ perintah aktif:
+
Active Draft command
@@ -4187,6 +4249,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Merging layer:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -5028,8 +5095,8 @@ To enabled FreeCAD to download these libraries, answer Yes.
- Bezier curve has been closed
- Bezier curve has been closed
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5051,6 +5118,11 @@ To enabled FreeCAD to download these libraries, answer Yes.
Click and drag to define next knot
Click and drag to define next knot
+
+
+ Bezier curve has been closed
+ Bezier curve has been closed
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5391,6 +5463,11 @@ To enabled FreeCAD to download these libraries, answer Yes.
Group name
Group name
+
+
+ Group
+ Kelompok
+
Select an object to offset
@@ -5552,6 +5629,14 @@ The final angle will be the base angle plus this amount.
successfully exported
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Kelompok
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_it.qm b/src/Mod/Draft/Resources/translations/Draft_it.qm
index 0be6274b11..c5608ab6f0 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_it.qm and b/src/Mod/Draft/Resources/translations/Draft_it.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_it.ts b/src/Mod/Draft/Resources/translations/Draft_it.ts
index c65c5deed6..b410e332a5 100644
--- a/src/Mod/Draft/Resources/translations/Draft_it.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_it.ts
@@ -713,11 +713,6 @@ Questa proprietà è di sola lettura, poiché il numero dipende dai punti conten
Area of this object
L'area di questo oggetto
-
-
- The shape of this object
- La forma di questo oggetto
-
The base object used by this object
@@ -728,6 +723,11 @@ Questa proprietà è di sola lettura, poiché il numero dipende dai punti conten
The PAT file used by this object
Il file PAT usato da questo oggetto
+
+
+ The shape of this object
+ La forma di questo oggetto
+
The pattern name used by this object
@@ -1136,6 +1136,16 @@ beyond the dimension line
Line color
Colore della linea
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1575,7 +1585,7 @@ Crea un gruppo prima di usare questo strumento.
Manage or create annotation styles
- Manage or create annotation styles
+ Gestisci o crea stili di annotazione
@@ -1629,8 +1639,8 @@ CTRL to snap, SHIFT to constrain.
Creates a circular arc by picking 3 points.
CTRL to snap, SHIFT to constrain.
- Creates a circular arc by picking 3 points.
-CTRL to snap, SHIFT to constrain.
+ Crea un arco circolare selezionando 3 punti.
+CTRL per agganciare, Maiusc per vincolare.
@@ -1704,11 +1714,23 @@ La Serie può essere trasformata in una serie polare o circolare cambiandone il
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Curva di Bezier
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1719,11 +1741,21 @@ CTRL per snap, MAIUSC per vincolare.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Strumenti Bezier
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1781,11 +1813,25 @@ Il clone risultante può essere scalato in ciascuna delle tre direzioni.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Curva di bezier cubica
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2135,6 +2181,25 @@ Può anche creare una copia offset dell'oggetto originale.
CTRL per lo snap, SHIFT per vincolare. Tenere premuto ALT e fare clic per creare una copia con ogni clic.
+
+ Draft_OrthoArray
+
+
+ Array
+ Serie
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Crea copie dell'oggetto selezionato e posiziona le copie con un motivo ortogonale,
+significa che le copie seguono la direzione specificata dagli assi X, Y, Z.
+
+La Serie può essere trasformata in una serie polare o circolare cambiandone il tipo.
+
+
Draft_PathArray
@@ -2849,14 +2914,6 @@ Una volta creato fare doppio clic sulla vista ad albero per ripristinare la posi
Quindi lo si può usare per salvare una diversa posizione della fotocamera e gli stati degli oggetti ogni volta che serve.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Gruppo
-
-
ImportAirfoilDAT
@@ -2925,6 +2982,11 @@ Quindi lo si può usare per salvare una diversa posizione della fotocamera e gli
Arc tools
Strumenti Arco
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3073,16 +3135,16 @@ Quindi lo si può usare per salvare una diversa posizione della fotocamera e gli
Auto
Auto
-
-
- active command:
- comando attivo:
-
None
Nessuno
+
+
+ active command:
+ comando attivo:
+
Active Draft command
@@ -4176,6 +4238,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Unisci livello:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -4189,7 +4256,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Unable to convert input into a scale factor
- Unable to convert input into a scale factor
+ Impossibile convertire l'input in un fattore di scala
@@ -4199,7 +4266,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Set custom scale
- Set custom scale
+ Imposta scala personalizzata
@@ -4209,7 +4276,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Set the scale used by draft annotation tools
- Set the scale used by draft annotation tools
+ Imposta la scala usata dagli strumenti di annotazione bozza
@@ -4299,77 +4366,77 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Snap Lock
- Snap Lock
+ Snap Blocca
Snap Endpoint
- Snap Endpoint
+ Snap Punto finale
Snap Midpoint
- Snap Midpoint
+ Snap punto centrale
Snap Center
- Snap Center
+ Snap Centro
Snap Angle
- Snap Angle
+ Snap Angolo
Snap Intersection
- Snap Intersection
+ Snap Intersezione
Snap Perpendicular
- Snap Perpendicular
+ Snap Perpendicolare
Snap Extension
- Snap Extension
+ Snap Estensione
Snap Parallel
- Snap Parallel
+ Snap Parallelo
Snap Special
- Snap Special
+ Snap Speciale
Snap Near
- Snap Near
+ Snap Vicino
Snap Ortho
- Snap Ortho
+ Snap Ortogonale
Snap Grid
- Snap Grid
+ Snap Griglia
Snap WorkingPlane
- Snap WorkingPlane
+ Snap Piano di lavoro
Snap Dimensions
- Snap Dimensions
+ Snap Quotature
@@ -5005,12 +5072,12 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.
(ON)
- (ON)
+ (ON)
(OFF)
- (OFF)
+ (OFF)
@@ -5019,8 +5086,8 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.
- Bezier curve has been closed
- La curva di Bezier è stata chiusa
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5042,6 +5109,11 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Click and drag to define next knot
Cliccare e trascinare per definire il prossimo nodo
+
+
+ Bezier curve has been closed
+ La curva di Bezier è stata chiusa
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5382,6 +5454,11 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Group name
Nome gruppo
+
+
+ Group
+ Gruppo
+
Select an object to offset
@@ -5543,6 +5620,14 @@ L'angolo finale sarà l'angolo base più questa quantità.
Esportato correttamente
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Gruppo
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.qm b/src/Mod/Draft/Resources/translations/Draft_ja.qm
index 4704219488..9ee17b32ae 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_ja.qm and b/src/Mod/Draft/Resources/translations/Draft_ja.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.ts b/src/Mod/Draft/Resources/translations/Draft_ja.ts
index 80ca9c97f6..02f2d81810 100644
--- a/src/Mod/Draft/Resources/translations/Draft_ja.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_ja.ts
@@ -708,11 +708,6 @@ This property is read-only, as the number depends on the points contained within
Area of this object
このオブジェクトの面積
-
-
- The shape of this object
- このオブジェクトの形
-
The base object used by this object
@@ -723,6 +718,11 @@ This property is read-only, as the number depends on the points contained within
The PAT file used by this object
このオブジェクトで使用されるPATファイル
+
+
+ The shape of this object
+ このオブジェクトの形
+
The pattern name used by this object
@@ -1130,6 +1130,16 @@ beyond the dimension line
Line color
線の色
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1696,11 +1706,23 @@ X、Y、Zの軸の指定方向にコピーを並べます。
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
ベジェ曲線
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1711,11 +1733,21 @@ CTRLでスナップ、SHIFTで拘束します。
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
ベジェツール
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1771,11 +1803,25 @@ The resulting clone can be scaled in each of its three directions.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
3次ベジェ曲線
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2119,6 +2165,25 @@ CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each
CTRLでスナップ、SHIFTで拘束します。ALTキーを押しながらクリックするごとにコピーを作成します。
+
+ Draft_OrthoArray
+
+
+ Array
+ 配列
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ 選択したオブジェクトのコピーを作成し、矩形パターンそれらを配置することで
+X、Y、Zの軸の指定方向にコピーを並べます。
+
+タイプを変更すると整列を軸周整列、円形整列へ変えることができます。
+
+
Draft_PathArray
@@ -2827,14 +2892,6 @@ Then you can use it to save a different camera position and objects' states any
これによって異なったカメラ位置とオブジェクトの状態を必要な時にいつでも保存することができます。
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- グループ
-
-
ImportAirfoilDAT
@@ -2903,6 +2960,11 @@ Then you can use it to save a different camera position and objects' states any
Arc tools
円弧ツール
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3051,16 +3113,16 @@ Then you can use it to save a different camera position and objects' states any
Auto
自動
-
-
- active command:
- アクティブコマンド:
-
None
なし
+
+
+ active command:
+ アクティブコマンド:
+
Active Draft command
@@ -4155,6 +4217,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Merging layer:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -5001,8 +5068,8 @@ FreeCADでこれらライブラリーのダウンロードを有効にするた
- Bezier curve has been closed
- ベジェ曲線は閉じています。
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5024,6 +5091,11 @@ FreeCADでこれらライブラリーのダウンロードを有効にするた
Click and drag to define next knot
次のノットを定義するためにクリックしてドラッグ
+
+
+ Bezier curve has been closed
+ ベジェ曲線は閉じています。
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5364,6 +5436,11 @@ FreeCADでこれらライブラリーのダウンロードを有効にするた
Group name
Group name
+
+
+ Group
+ グループ
+
Select an object to offset
@@ -5525,6 +5602,14 @@ The final angle will be the base angle plus this amount.
successfully exported
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ グループ
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_ka.qm b/src/Mod/Draft/Resources/translations/Draft_ka.qm
index b17a93bf0d..92ccff8ef0 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_ka.qm and b/src/Mod/Draft/Resources/translations/Draft_ka.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_ka.ts b/src/Mod/Draft/Resources/translations/Draft_ka.ts
index 900341a58e..794a90d22a 100644
--- a/src/Mod/Draft/Resources/translations/Draft_ka.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_ka.ts
@@ -34,10 +34,10 @@
- Ortho: places the copies in the direction of the global X, Y, Z axes.
- Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis.
- Circular: places the copies in concentric circular layers around the base object.
- The type of array to create.
-- Ortho: places the copies in the direction of the global X, Y, Z axes.
-- Polar: places the copies along a circular arc, up to a specified angle, and with certain orientation defined by a center and an axis.
-- Circular: places the copies in concentric circular layers around the base object.
+ შესაქმნელად მასივის ტიპი.
+- ორთო: განათავსებს ასლებს გლობალური X, Y, Z ღერძების მიმართულებით.
+- პოლარული: ათავსებს ასლებს წრიული რკალის გასწვრივ, მითითებულ კუთხამდე და გარკვეული ორიენტირებით, რომელიც განსაზღვრულია ცენტრით და ღერძით.
+- წრიული: ათავსებს ასლებს კონცენტრირებულ წრიულ ფენებში საბაზისო ობიექტის გარშემო.
@@ -62,17 +62,17 @@
Distance and orientation of intervals in X direction
- Distance and orientation of intervals in X direction
+ ინტერვალების დაცილება და ორიენტაცია X ღერძის მიმართულებით
Distance and orientation of intervals in Y direction
- Distance and orientation of intervals in Y direction
+ ინტერვალების დაცილება და ორიენტაცია Y ღერძის მიმართულებით
Distance and orientation of intervals in Z direction
- Distance and orientation of intervals in Z direction
+ ინტერვალების დაცილება და ორიენტაცია Z ღერძის მიმართულებითv
@@ -139,8 +139,8 @@ Leave this property empty to be able to set 'Axis' and 'Center' manually.
Total number of elements in the array.
This property is read-only, as the number depends on the parameters of the array.
- Total number of elements in the array.
-This property is read-only, as the number depends on the parameters of the array.
+ მასივში ელემენტების საერთო რაოდენობა.
+ეს თვისება არის მხოლოდ წაკითხვადი, რადგან რიცხვი დამოკიდებულია მასივის პარამეტრებზე.
@@ -236,13 +236,13 @@ There are various possibilities:
- An object, and one of its edges.
- An object, and two of its vertices.
- An arc object, and its edge.
- The object, and specific subelements of it,
-that this dimension object is measuring.
+ ობიექტი და მისი კონკრეტული ქვეელემენტები,
+რომელსაც ამ განზომილების ობიექტი ზომავს.
-There are various possibilities:
-- An object, and one of its edges.
-- An object, and two of its vertices.
-- An arc object, and its edge.
+არსებობს სხვადასხვა შესაძლებლობა:
+- ობიექტი და მისი ერთ-ერთი წიბო.
+- ობიექტი და მისი ორი წვერო.
+- რკალის ობიექტი და მისი წიბო.
@@ -254,13 +254,13 @@ There are various possibilities:
- An object, and two of its vertices.
- An arc object, and its edge.
- The object, and specific subelements of it,
-that this dimension object is measuring.
+ ობიექტი და მისი კონკრეტული ქვეელემენტები,
+რომელსაც ამ განზომილების ობიექტი ზომავს.
-There are various possibilities:
-- An object, and one of its edges.
-- An object, and two of its vertices.
-- An arc object, and its edge.
+არსებობს სხვადასხვა შესაძლებლობა:
+- ობიექტი და მისი ერთ-ერთი წიბო.
+- ობიექტი და მისი ორი წვერო.
+- რკალის ობიექტი და მისი წიბო.
@@ -320,13 +320,11 @@ from the 'Start' and 'End' properties.
If the 'Linked Geometry' is an arc or circle, this 'Distance'
is the radius or diameter, depending on the 'Diameter' property.
- The value of the measurement.
+ გაზომილი მნიშვნელობა.
-This property is read-only because the value is calculated
-from the 'Start' and 'End' properties.
+მხოლოდ წაკითხვადი. მნიშვნელობა გამოითვლება თვისებებიდან "დაწყება" და "დასრულება".
-If the 'Linked Geometry' is an arc or circle, this 'Distance'
-is the radius or diameter, depending on the 'Diameter' property.
+თუ „ასოცირებული გეომეტრია“ არის რკალი ან წრე, მაშინ ეს მნიშვნელობა იქნება რადიუსი ან დიამეტრი, რომელიც დამოკიდებულია „დიამეტრი“ თვისებაზე.
@@ -380,8 +378,8 @@ the 'First Angle' and 'Last Angle' properties.
The text displayed by this object.
It is a list of strings; each element in the list will be displayed in its own line.
- The text displayed by this object.
-It is a list of strings; each element in the list will be displayed in its own line.
+ ამ ობიექტის მიერ ნაჩვენები ტექსტი.
+ეს არის სტრიქონების სია; ამ სიის თითოეული ელემენტი გამოჩნდება ახალ სტრიქონში.
@@ -515,11 +513,11 @@ depending on the value of 'Straight Direction'.
This property is read-only, as the final text depends on 'Label Type',
and the object defined in 'Target'.
The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'.
- The text displayed by this label.
+ ამ ჭდის ტექსტი.
-This property is read-only, as the final text depends on 'Label Type',
-and the object defined in 'Target'.
-The 'Custom Text' is displayed only if 'Label Type' is set to 'Custom'.
+ეს თვისება მხოლოდ წაკითხვადია, რადგან საბოლოო ტექსტი დამოკიდებულია „ჭდის ტიპზე“,
+და ობიექტზე, განსაზღვრული როგორც "სამიზნე".
+"მომხმარებლის ტექსტი" ნაჩვენებია მხოლოდ იმ შემთხვევაში, თუ "ჭდის ტიპი" დაყენებულია "მომხმარებლის ტექსტი“-ზე.
@@ -578,7 +576,7 @@ or from the subelement 'VertexN', 'EdgeN', or 'FaceN', respectively, if it is sp
Base object that will be duplicated
- Base object that will be duplicated
+ საბაზისო ობიექტი, რომელიც დადუბლირდება
@@ -665,8 +663,8 @@ This property is read-only, as the number depends on the points contained within
Length of line segments if tessellating Ellipses or B-splines
into line segments
- Length of line segments if tessellating Ellipses or B-splines
- into line segments
+ ხაზის სეგმენტების სიგრძე ელიფსების ან B-სპლაინების ხაზის სეგმენტებად
+ ტესელაციისის დროს
@@ -703,9 +701,9 @@ This property is read-only, as the number depends on the points contained within
End angle of the elliptical arc
(for a full circle, give it same value as First Angle)
- End angle of the elliptical arc
+ ელიფსური რკალის ბოლო კუთხე
- (for a full circle, give it same value as First Angle)
+ (სრული წრეწირისთვის მიუთითეთ იგივე მნიშვნელობა, რაც პირველი კუთხეა)
@@ -722,11 +720,6 @@ This property is read-only, as the number depends on the points contained within
Area of this object
ობიექტის ფართობი
-
-
- The shape of this object
- ობიექტის ფორმა
-
The base object used by this object
@@ -737,6 +730,11 @@ This property is read-only, as the number depends on the points contained within
The PAT file used by this object
ამ ობიექტის მიერ გამოყენებული PAT ფაილი
+
+
+ The shape of this object
+ ობიექტის ფორმა
+
The pattern name used by this object
@@ -755,7 +753,7 @@ This property is read-only, as the number depends on the points contained within
If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces)
- If set to False, hatch is applied as is to the faces, without translation (this might give wrong results for non-XY faces)
+ თუ გამორთულია, ზედაპირებზე დაშტრიხვა გადატარდება როგორც არის. (არა-XY ზედაპირებისთვის არასწორი შედეგები შეიძლება მოგცეთ)
@@ -963,7 +961,7 @@ they will only be editable by changing the style through the 'Annotation style e
If the wire is closed or not
- If the wire is closed or not
+ არის პოლიხაზი დახურული, თუ არა
@@ -998,7 +996,7 @@ they will only be editable by changing the style through the 'Annotation style e
The number of subdivisions of each edge
- The number of subdivisions of each edge
+ თითოეული წიბოს ქვედანაყოფების რიცხვი
@@ -1049,9 +1047,9 @@ Write '$dim' so that it is replaced by the dimension length.
A unit to express the measurement.
Leave blank for system default.
Use 'arch' to force US arch notation
- A unit to express the measurement.
-Leave blank for system default.
-Use 'arch' to force US arch notation
+ გაზომვის გამოხატვის ერთეული.
+სისტემის ნაგულისხმევად დატოვეთ ცარიელი.
+გამოიყენეთ „თაღოვანი“ აშშ-ის თაღოვანი ნოტაციისთვის
@@ -1147,6 +1145,16 @@ beyond the dimension line
Line color
ხაზის ფერი
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1218,7 +1226,7 @@ beyond the dimension line
Writing objects shown/hidden state
- Writing objects shown/hidden state
+ ობიექტების ჩვენება/დამალვის სტატუსის ჩაწერა
@@ -1432,12 +1440,12 @@ from menu Tools -> Addon Manager
&Modification
- &მოდიფიკაცია
+ &ჩასწორება
&Utilities
- &უტილიტები
+ &ხელსაწყოები
@@ -1500,7 +1508,7 @@ The array can be turned into a polar or a circular array by changing its type.
Unable to insert new object into a scaled part
- Unable to insert new object into a scaled part
+ მასშტაბირებად ნაწილში ახალი ობიექტის ჩასმა შეუძლებელია
@@ -1525,9 +1533,9 @@ The array can be turned into a polar or a circular array by changing its type.Adds the selected objects to the construction group,
and changes their appearance to the construction style.
It creates a construction group if it doesn't exist.
- Adds the selected objects to the construction group,
-and changes their appearance to the construction style.
-It creates a construction group if it doesn't exist.
+ ამატებს არჩეულ ობიექტებს სამშენებლო ჯგუფს,
+და ცვლის მათ იერსახეს მშენებლობის სტილში.
+ის ქმნის სამშენებლო ჯგუფს, თუ ის არ არსებობს.
@@ -1572,8 +1580,8 @@ It creates a construction group if it doesn't exist.
Moves the selected objects to an existing group, or removes them from any group.
Create a group first to use this tool.
- Moves the selected objects to an existing group, or removes them from any group.
-Create a group first to use this tool.
+ მონიშნული ობიექტების არსებულ ჯგუფში შეტანა, ან ყველა ჯგუფიდან გამოტანა.
+ამ ხელსაწყოს გამოსაყენებლად ჯერ შექმენით ჯგუფი.
@@ -1586,7 +1594,7 @@ Create a group first to use this tool.
Manage or create annotation styles
- Manage or create annotation styles
+ შენიშვნების სტილების მართვა ან შექმნა
@@ -1716,11 +1724,23 @@ The array can be turned into a polar or a circular array by changing its type.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
ბეზიეს მრუდი
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1731,11 +1751,21 @@ CTRL to snap, SHIFT to constrain.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
ბეზიეს ხელსაწყოები
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1793,11 +1823,25 @@ The resulting clone can be scaled in each of its three directions.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
კუბური ბეზიეს მრუდი
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -1988,12 +2032,12 @@ If other objects are selected they are ignored.
Create hatches on selected faces
- Create hatches on selected faces
+ მონიშნულ ზედაპირებზე დაშტრიხვის შექმნა
Creates hatches on the faces of a selected object
- Creates hatches on the faces of a selected object
+ მონიშნული ობიექტების ზედაპირის დაშტრიხვა
@@ -2018,14 +2062,14 @@ otherwise it will try to heal all objects in the active document.
Join
- შეუერთდით
+ შეერთება
Joins the selected lines or polylines into a single object.
The lines must share a common point at the start or at the end for the operation to succeed.
- Joins the selected lines or polylines into a single object.
-The lines must share a common point at the start or at the end for the operation to succeed.
+ აერთიანებს არჩეულ ხაზებს ან პოლიხაზებს ერთ ობიექტში.
+ოპერაცია წარმატებისთვის ხაზებს უნდა ჰქონდეთ ზიარი საწყისი ან ბოლო საერთო წერტილი.
@@ -2068,8 +2112,8 @@ will be used to provide information to the label.
Adds a layer to the document.
Objects added to this layer can share the same visual properties such as line color, line width, and shape color.
- Adds a layer to the document.
-Objects added to this layer can share the same visual properties such as line color, line width, and shape color.
+ ამატებს ფენას დოკუმენტს.
+ამ ფენაში დამატებულ ობიექტებს შეუძლიათ ჰქონდეთ ისეთი ერთნაირი ვიზუალური თვისებები, როგორიცაა ხაზის ფერი, ხაზის სიგანე და ფორმის ფერი.
@@ -2147,6 +2191,25 @@ It can also create an offset copy of the original object.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.
+
+ Draft_OrthoArray
+
+
+ Array
+ მასივი
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+
+
Draft_PathArray
@@ -2254,7 +2317,7 @@ Select the base object, and then select the compound or the sketch to create the
PointLinkArray
- PointLinkArray
+ ბზინვის შეფერილობის კოეფიციენტი
@@ -2511,7 +2574,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren'
Set snapping to endpoints of an edge.
- Set snapping to endpoints of an edge.
+ მიბმის დაყენება წიბოს ბოლო წერტილში.
@@ -2576,7 +2639,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren'
Set snapping to the midpoint of an edge.
- Set snapping to the midpoint of an edge.
+ მიბმის დაყენება წიბოს შუა წერტილში.
@@ -2705,7 +2768,7 @@ then draw a line to specify the distance and direction of stretching.
Highlight the subelements of the selected objects, so that they can then be edited with the move, rotate, and scale tools.
- Highlight the subelements of the selected objects, so that they can then be edited with the move, rotate, and scale tools.
+ მონიშნული ობიექტების ქვეელემენტების გამოკვეთა მათი გადაადგილების, ბრუნვისა და მასშტაბის ხელსაწყოებით ჩასასწორებლად.
@@ -2718,7 +2781,7 @@ then draw a line to specify the distance and direction of stretching.
Creates a multi-line annotation. CTRL to snap.
- Creates a multi-line annotation. CTRL to snap.
+ მრავალხაზიანი ანოტაციის შექმნა. მისაბმელად - CTRL.
@@ -2732,8 +2795,8 @@ then draw a line to specify the distance and direction of stretching.
Toggles the Construction mode.
When this is active, the following objects created will be included in the construction group, and will be drawn with the specified color and properties.
- Toggles the Construction mode.
-When this is active, the following objects created will be included in the construction group, and will be drawn with the specified color and properties.
+ კონსტრუქციის რეჟიმის ჩართ/გამორთ.
+როცა ჩართულია, შემდეგი შექმნილი ობიექტები დაემატება კონსტრუქციულ ჯგუფში და დაიხატება მითითებული ფერითა და თვისებებით.
@@ -2748,9 +2811,9 @@ When this is active, the following objects created will be included in the const
Toggles the Continue mode.
When this is active, any drawing tool that is terminated will automatically start again.
This can be used to draw several objects one after the other in succession.
- Toggles the Continue mode.
-When this is active, any drawing tool that is terminated will automatically start again.
-This can be used to draw several objects one after the other in succession.
+ გაგრძელების რეჟიმის ჩართ/გამორთ.
+როცა ჩართულია, ნებისმიერი ნახაზის ინსტრუმენტი, რომელიც დასრულდება, ავტომატურად დაიწყება ხელახლა.
+შეიძლება გამოყენებულ იქნას ზედიზედ რამდენიმე ობიექტის მიყოლებით შესაქმნელად.
@@ -2758,7 +2821,7 @@ This can be used to draw several objects one after the other in succession.
Toggle normal/wireframe display
- Toggle normal/wireframe display
+ ჩვენების ნორმალურ/კარკასულ რეჟიმებს შორის გადართვა
@@ -2811,10 +2874,9 @@ CTRL snaps, SHIFT constrains to current segment or to normal, ALT inverts.
- Upgrades the selected objects into more complex shapes.
-The result of the operation depends on the types of objects, which may be able to be upgraded several times in a row.
-For example, it can join the selected objects into one, convert simple edges into parametric polylines,
-convert closed edges into filled faces and parametric polygons, and merge faces into a single face.
+ გარდაქმნის შერჩეულ ობიექტებს უფრო რთულ ფორმებად.
+ოპერაციის შედეგი დამოკიდებულია ობიექტების ტიპებზე, რომლებიც შეიძლება ზედიზედ რამდენჯერმე გარდაიქმნას.
+მაგალითად, შეუძლია შეაერთოს შერჩეული ობიექტები ერთში, გადაიყვანოს მარტივი კიდეები პოლიხაზებად, მჭიდროდ განლაგებული წიბოები გადაიყვანოს ზედაპირებში და მრავალკუთხედებში და რამდენიმე ზედაპირი შეაერთოს ერთში.
@@ -2860,14 +2922,6 @@ Once the object is created double click it in the tree view to restore the camer
Then you can use it to save a different camera position and objects' states any time you need.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- ჯგუფი
-
-
ImportAirfoilDAT
@@ -2924,18 +2978,23 @@ Then you can use it to save a different camera position and objects' states any
&Modification
- &მოდიფიკაცია
+ &ჩასწორება
&Utilities
- &უტილიტები
+ &ხელსაწყოები
Arc tools
თაღის შექმნის ხელსაწყოები
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3084,16 +3143,16 @@ Then you can use it to save a different camera position and objects' states any
Auto
ავტო
-
-
- active command:
- აქტიური ბრძანება:
-
None
არცერთი
+
+
+ active command:
+ აქტიური ბრძანება:
+
Active Draft command
@@ -3273,7 +3332,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands
- If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands
+ თუ მონიშნულია, ობიექტები გადატანის ნაცვლად კოპირდება. მორგება -> მონახაზი -> გლობალური კოპირების რეჟიმი ამ რეჟიმის შემდეგ ბრძანებებში შესანარჩუნებლად
@@ -3323,7 +3382,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Open a FileChooser for font file
- Open a FileChooser for font file
+ ფონტის ფაილის ასარჩევი ფანჯრის გახსნა
@@ -3548,7 +3607,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version.
- Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version.
+ შეცდომა DWG-ის კონვერტაციის დროს. სცადეთ გადაიტანოთ DWG ფაილი დირექტორიაში სახელით ჰარეეების და არაინგლისური სიმბოლოების გარეშე, ან სცადეთ შენახვა DWG-ის ფორმატის უფრო ძველ ვერსიაში.
@@ -3569,7 +3628,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Selected Shapes must define a plane
- Selected Shapes must define a plane
+ მონიშნული მოხაზულობები სიბრტყეს უნდა აღწერენ
@@ -3580,7 +3639,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
No active document. Aborting.
- No active document. Aborting.
+ აქტიური დოკუმენტის გარეშე. გაუქმება.
@@ -3590,7 +3649,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
No solid object created
- No solid object created
+ მყარი ობიექტი არ შექმნილა
@@ -4106,7 +4165,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
ShapeString: string has no wires
- ShapeString: string has no wires
+ ShapeString: სტრიქონს პოლიხაზები არ გააჩნია
@@ -4151,7 +4210,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
added view property 'ScaleMultiplier'
- added view property 'ScaleMultiplier'
+ თვიება 'ScaleMultiplier' დამატებულია
@@ -4188,6 +4247,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
ფენების შერწყმა:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -4201,17 +4265,17 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Unable to convert input into a scale factor
- Unable to convert input into a scale factor
+ შეყვანილი მნიშვნელობის მასშტაბის ფაქტორად გადაქცევა შეუძლებელია
Unable to convert input into a scale factor
- Unable to convert input into a scale factor
+ შეყვანილი მნიშვნელობის მასშტაბის ფაქტორად გადაქცევა შეუძლებელია
Set custom scale
- Set custom scale
+ მასშტაბის ხელით დაყენება
@@ -4221,7 +4285,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Set the scale used by draft annotation tools
- Set the scale used by draft annotation tools
+ დააყენეთ მასშტაბი, რომელიც გამოიყენება მონახაზის ანოტაციის ხელსაწყოების მიერ
@@ -4236,7 +4300,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Wires:
- მოღუნული ხაზები:
+ პოლიხაზები:
@@ -4311,77 +4375,77 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Snap Lock
- Snap Lock
+ მიბმის ჩაკეტვა
Snap Endpoint
- Snap Endpoint
+ მიბმის ბოლო წერტილი
Snap Midpoint
- Snap Midpoint
+ მიბმის შუა წერტილი
Snap Center
- Snap Center
+ მიბმის ცენტრი
Snap Angle
- Snap Angle
+ მიბის კუთხე
Snap Intersection
- Snap Intersection
+ კვეთის მიბმა
Snap Perpendicular
- Snap Perpendicular
+ მართკუთხად მიმაგრება
Snap Extension
- Snap Extension
+ გაფართოების მიბმა
Snap Parallel
- Snap Parallel
+ პარალელურად მიბმა
Snap Special
- Snap Special
+ სპეციალური მიბმა
Snap Near
- Snap Near
+ ახლოს მიბმა
Snap Ortho
- Snap Ortho
+ მიბმის ორთო
Snap Grid
- Snap Grid
+ ბადის მიბმა
Snap WorkingPlane
- Snap WorkingPlane
+ სამუშაო დაფის მიმაგრება
Snap Dimensions
- Snap Dimensions
+ მიბმის ზომები
@@ -4396,7 +4460,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Unable to insert new object into a scaled part
- Unable to insert new object into a scaled part
+ მასშტაბირებად ნაწილში ახალი ობიექტის ჩასმა შეუძლებელია
@@ -4606,7 +4670,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Pick ShapeString location point:
- Pick ShapeString location point:
+ აირჩიეთ ShapeString-ის მდებარეობის წერტილი:
@@ -4699,7 +4763,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
Selection is not a Knot
- Selection is not a Knot
+ მონიშნული ელემენტი კვანძი არაა
@@ -4809,7 +4873,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
Please select exactly two objects, the base object and the point object, before calling this command.
- Please select exactly two objects, the base object and the point object, before calling this command.
+ ამ ბრძანების გამოძახებამდე აირჩიეთ ორი ობიექტი: საბაზისო ობიექტი და წერტილი.
@@ -5009,7 +5073,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
This object type cannot be scaled directly. Please use the clone method.
- This object type cannot be scaled directly. Please use the clone method.
+ ამ ობიექტის ტიპის პირდაპირ მასშტაბირება შეუძლებელია. გთხოვთ, გამოიყენოთ კლონირების მეთოდი.
@@ -5019,12 +5083,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
(ON)
- (ON)
+ (ჩართ)
(OFF)
- (OFF)
+ (გამორთ)
@@ -5033,8 +5097,8 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
- Bezier curve has been closed
- Bezier curve has been closed
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5044,7 +5108,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
Pick next point, or finish (A) or close (O)
- Pick next point, or finish (A) or close (O)
+ აირჩიეთ შემდეგი წერტილი, დაასრულეთ (A) ან დახურეთ (O)
@@ -5054,12 +5118,17 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
Click and drag to define next knot
- Click and drag to define next knot
+ შემდეგი კვანძის შესაქმნელად დააწკაპუნეთ და გადაათრიეთ
+
+
+
+ Bezier curve has been closed
+ ბეზიეს რკალი დაიხურა
Click and drag to define next knot, or finish (A) or close (O)
- Click and drag to define next knot, or finish (A) or close (O)
+ დააწკაპუნეთ და გადაათრიეთ შემდეგი კვანძის შესაქმნელად, დასასრულებლად(A) ან დასახურად(O)
@@ -5396,6 +5465,11 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
Group name
ჯგუფის სახელი
+
+
+ Group
+ ჯგუფი
+
Select an object to offset
@@ -5404,7 +5478,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
Offset only works on one object at a time.
- Offset only works on one object at a time.
+ წანაცვლება ერთ ჯერზე მხოლოდ ერთ ობიექტზე მუშაობს.
@@ -5557,6 +5631,14 @@ The final angle will be the base angle plus this amount.
გატანა წარმატებულია
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ ჯგუფი
+
+
Draft_Snap
@@ -5667,7 +5749,7 @@ The final angle will be the base angle plus this amount.
Import styles from json file
- Import styles from json file
+ სტილების json ფაილიდან შემოტანა
@@ -5693,7 +5775,7 @@ The final angle will be the base angle plus this amount.
Line spacing in system units
- Line spacing in system units
+ საზომი ერთეულების სტრიქონებს შორის მანძილი
@@ -5824,7 +5906,7 @@ The final angle will be the base angle plus this amount.
The length of the extension lines
- The length of the extension lines
+ გაფართოების ხაზების სიგრძე
@@ -5957,8 +6039,8 @@ A Link array is more efficient when creating multiple copies, but it cannot be f
Distance from one element in one ring of the array to the next element in the same ring.
It cannot be zero.
- Distance from one element in one ring of the array to the next element in the same ring.
-It cannot be zero.
+ მანძილი მასივის ერთ რგოლში ერთი ელემენტიდან იმავე რგოლში არსებულ მომდევნო ელემენტამდე.
+არ შეიძლება იყოს ნულის ტოლი.
@@ -5987,8 +6069,8 @@ It cannot be zero.
Number of circular layers or rings to create, including a copy of the original object.
It must be at least 2.
- Number of circular layers or rings to create, including a copy of the original object.
-It must be at least 2.
+ მრგვალი ფენების ან რგოლების რაოდენობა შესაქმნელად, ორიგინალური ობიექტის ასლის ჩათვლით.
+ეს უნდა იყოს მინიმუმ 2.
@@ -6134,8 +6216,8 @@ Negative values will result in copies produced in the negative direction.
Number of elements in the array in the specified direction, including a copy of the original object.
The number must be at least 1 in each direction.
- Number of elements in the array in the specified direction, including a copy of the original object.
-The number must be at least 1 in each direction.
+ ელემენტების რაოდენობა მასივში მითითებული მიმართულებით, ორიგინალური ობიექტის ასლის ჩათვლით.
+რიცხვი უნდა იყოს მინიმუმ 1 თითოეული მიმართულებით.
@@ -6282,7 +6364,7 @@ It must be at least 2.
Text to be made into ShapeString
- Text to be made into ShapeString
+ ტექსტი გარდაიქმნება ShapeString-ად
@@ -6473,7 +6555,7 @@ value by using the [ and ] keys while drawing
lines
- ხაზები
+ ხაზი
@@ -6841,7 +6923,7 @@ value by using the [ and ] keys while drawing
The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users.
- The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users.
+ ათწილადების რაოდენობა შიდა კოორდინატების ოპერაციებში (მაგ. 3 = 0,001). მნიშვნელობები 6-დან 8-მდე, როგორც წესი, განიხილება საუკეთესო კომპრომისად FreeCAD-ის მომხმარებლებს შორის.
@@ -6858,12 +6940,12 @@ Values with differences below this value will be treated as same. This value wil
If this option is checked, the layers drop-down list will also show groups, allowing you to automatically add objects to groups too.
- If this option is checked, the layers drop-down list will also show groups, allowing you to automatically add objects to groups too.
+ თუ ეს პარამეტრი მონიშნულია, ფენების ჩამოსაშლელი სია ასევე აჩვენებს ჯგუფებს, რაც საშუალებას მოგცემთ ავტომატურად დაამატოთ ობიექტები ჯგუფებშიც.
Show groups in layers list drop-down button
- Show groups in layers list drop-down button
+ ფენების ჩამოსაშლელ სიაში ჯგუფების ჩვენება
@@ -6874,23 +6956,23 @@ Values with differences below this value will be treated as same. This value wil
When drawing lines, set focus on Length instead of X coordinate.
This allows to point the direction and type the distance.
- When drawing lines, set focus on Length instead of X coordinate.
-This allows to point the direction and type the distance.
+ ხაზების ხაზვისას ფოკუსის X კოორდინატის მაგიერ სიგრძეზე დასმა.
+ეს საშუალებას გაზლევთ მიუთითოთ მიმართულება და აკრიფოთ მანძილი.
Set focus on Length instead of X coordinate
- Set focus on Length instead of X coordinate
+ ფოკუსის დაყენება სიგრძეზე X კოორდინატის ნაცვლად
If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19
- If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19
+ როცა ეს ჩართულია, არსებულ ობიექტზე ან ზედაპრზე მონახაზის ობიექტის შექნისას მას "მხარდაჭერა"-ის თვისებაც მიემაგრება. ეს ნაგულისხმევად იყო ჩართული FreeCAD-ის 0.19 ვერსიამდე
Set the Support property when possible
- Set the Support property when possible
+ "მხარდაჭერის" თვისების დამატება, როცა შესაძლებელია
@@ -6908,13 +6990,13 @@ Otherwise, they will appear as wireframe
Normally, after copying objects, the copies get selected.
If this option is checked, the base objects will be selected instead.
- Normally, after copying objects, the copies get selected.
-If this option is checked, the base objects will be selected instead.
+ ჩვეულებრივ ობიექტების კოპირების შემდეგ მოინიშნება ასლები.
+თუ ეს ჩართულია, მოინიშნება საწყისი ობიექტები.
Select base objects after copying
- Select base objects after copying
+ კოპირების შემდეგ საბაზისო ობიექტების მონიშვნა
@@ -6958,7 +7040,7 @@ Note that this is not fully supported, and many object will be not editable with
This is the default group name for construction geometry
- This is the default group name for construction geometry
+ გეომეტრიის კონსტრუქტორის ნაგულისხმევი ჯგუფის სახელი
@@ -7058,7 +7140,7 @@ Note that this is not fully supported, and many object will be not editable with
The resolution to draw the patterns in. Default value is 128. Higher values give better resolutions, lower values make drawing faster
- The resolution to draw the patterns in. Default value is 128. Higher values give better resolutions, lower values make drawing faster
+ შაბლონების დახატვის გარჩევადობა. ნაგულისხმევი მნიშვნელობა 128-ა. მაღალი მნიშვნელობები იძლევა უკეთეს გარჩევადობას, ქვედა მნიშვნელობები აჩქარებს დახატვას
@@ -7341,7 +7423,7 @@ such as "Arial:Bold"
Method chosen for importing SVG object color to FreeCAD
- Method chosen for importing SVG object color to FreeCAD
+ SVG ობიექტების ფერების FreeCAD-ში შემოტანის არჩეული მეთოდი
@@ -7362,8 +7444,8 @@ such as "Arial:Bold"
If checked, no units conversion will occur.
One unit in the SVG file will translate as one millimeter.
- If checked, no units conversion will occur.
-One unit in the SVG file will translate as one millimeter.
+ თუ მონიშნულია, არ მოხდება ერთეულების კონვერტაცია.
+SVG ფაილში ერთი ერთეული ითარგმნება როგორც ერთი მილიმეტრი.
@@ -7383,7 +7465,7 @@ One unit in the SVG file will translate as one millimeter.
Translated (for print & display)
- Translated (for print & display)
+ გადატანა (დასათვალიერებლად & დასაბეჭდად)
@@ -7410,9 +7492,9 @@ One unit in the SVG file will translate as one millimeter.
Versions of Open CASCADE older than version 6.8 don't support arc projection.
In this case arcs will be discretized into small line segments.
This value is the maximum segment length.
- Versions of Open CASCADE older than version 6.8 don't support arc projection.
-In this case arcs will be discretized into small line segments.
-This value is the maximum segment length.
+ Open CASCADE-ის 6.8 ვერსიაზე ძველი ვერსიებს არ აქვთ რკალის პროექციის მხარდაჭერა.
+ამ შემთხვევაში რკალი დისკრეტირებული იქნება მცირე ხაზის სეგმენტებად.
+ეს მნიშვნელობა არის სეგმენტის მაქსიმალური სიგრძე.
@@ -7448,8 +7530,8 @@ This value is the maximum segment length.
Python importer is used, otherwise the newer C++ is used.
Note: C++ importer is faster, but is not as featureful yet
- Python importer is used, otherwise the newer C++ is used.
-Note: C++ importer is faster, but is not as featureful yet
+ გამოიყენება Python შემომტანი. წინააღმდეგ შემთხვევაში გამოიყენება უფრო ახალი, C++-ზე დაწერილი.
+შენიშვნა: C++ შემომტანი უფრო სწრაფია, მაგრამ ჯერ ბოლომდე ფუნქციონალური არაა
@@ -7460,8 +7542,8 @@ Note: C++ importer is faster, but is not as featureful yet
Python exporter is used, otherwise the newer C++ is used.
Note: C++ exporter is faster, but is not as featureful yet
- Python exporter is used, otherwise the newer C++ is used.
-Note: C++ exporter is faster, but is not as featureful yet
+ გამოიყენება Python გამტანი. წინააღმდეგ შემთხვევაში გამოიყენება უფრო ახალი, C++-ზე დაწერილი.
+შენიშვნა: C++ გამტანი უფრო სწრაფია, მაგრამ ჯერ ბოლომდე ფუნქციონალური არაა
@@ -7478,9 +7560,7 @@ Note: C++ exporter is faster, but is not as featureful yet
Allow FreeCAD to download the Python converter for DXF import and export.
You can also do this manually by installing the "dxf_library" workbench
from the Addon Manager.
- Allow FreeCAD to download the Python converter for DXF import and export.
-You can also do this manually by installing the "dxf_library" workbench
-from the Addon Manager.
+ მიეცით უფლება FreeCAD-ს ჩამოტვირთოს Python კონვერტორი DXF შეტანისთვის და გატანისთვის. თქვენ ასევე შეგიძლიათ ამის გაკეთება ხელით, "dxf_library" სამუშაო მაგიდის დაყენებით დამატებების მმართველიდან.
@@ -7517,7 +7597,7 @@ from the Addon Manager.
If unchecked, points won't be imported
- If unchecked, points won't be imported
+ თუ გამორთულია, წერტილები არ იქნება შემოტანილი
@@ -7590,17 +7670,17 @@ from the Addon Manager.
The factor is the conversion between the unit of your DXF file and millimeters.
Example: for files in millimeters: 1, in centimeters: 10,
in meters: 1000, in inches: 25.4, in feet: 304.8
- Scale factor to apply to DXF files on import.
-The factor is the conversion between the unit of your DXF file and millimeters.
-Example: for files in millimeters: 1, in centimeters: 10,
- in meters: 1000, in inches: 25.4, in feet: 304.8
+ მასშტაბის ფაქტორი DXF ფაილების იმპორტისას.
+ფაქტორი არის გარდაქმნა თქვენი DXF ფაილის საზომ ერთეულსა და მილიმეტრებს შორის.
+მაგალითი: ფაილებისთვის მილიმეტრებში: 1, სანტიმეტრებში: 10,
+ მეტრებში: 1000, ინჩებში: 25.4, ფუტებში: 304.8
Colors will be retrieved from the DXF objects whenever possible.
Otherwise default colors will be applied.
- Colors will be retrieved from the DXF objects whenever possible.
-Otherwise default colors will be applied.
+ ფერები იქნება ამოღებული DXF ობიექტებიდან მათი წვდომადობის მიხედვით.
+წინააღმდეგ შემთხვევაში გამოყენებული იქნება ნაგულისხმევი ფერები.
@@ -7656,12 +7736,12 @@ instead of the size they have in the DXF document
Hatches will be converted into simple wires
- Hatches will be converted into simple wires
+ დაშტრიხვა გარდაიქმება მარტივ პოლიხაზად
Import hatch boundaries as wires
- Import hatch boundaries as wires
+ დაშტრიხვის საზღვრების პოლიხაზებად შემოტანა
@@ -7678,7 +7758,7 @@ as closed wires with correct width
Ellipse export is poorly supported. Use this to export them as polylines instead.
- Ellipse export is poorly supported. Use this to export them as polylines instead.
+ ელიფსის გატანა ცუდადაა მხარდაჭერილი. გთხოვთ გაიტანოთ, როგორც პოლიხაზი.
@@ -7694,8 +7774,8 @@ as closed wires with correct width
Maximum length of each of the polyline segments.
If it is set to '0' the whole spline is treated as a straight segment.
- Maximum length of each of the polyline segments.
-If it is set to '0' the whole spline is treated as a straight segment.
+ პოლიხაზის თითოეული სეგმენტის მაქსიმალური სიგრძე.
+თუ დაყენებულია '0', მთელი სპლაინი განიხილება, როგორც სწორი სეგმენტი.
@@ -7711,7 +7791,7 @@ If it is set to '0' the whole spline is treated as a straight segment.
Export 3D objects as polyface meshes
- Export 3D objects as polyface meshes
+ 3D ობიექტების, როგორც პოლიხაზების გატანა
@@ -7829,7 +7909,7 @@ This might fail for post DXF R12 templates.
If checked, a grid will appear when drawing
- If checked, a grid will appear when drawing
+ თუ ჩართულია, ხაზვისას ბადე გამოჩნდება
@@ -7912,7 +7992,7 @@ This might fail for post DXF R12 templates.
lines
- ხაზები
+ ხაზი
@@ -7947,7 +8027,7 @@ This might fail for post DXF R12 templates.
<html><head/><body><p>Sets the maximum number of objects Draft Edit</p><p>can process at the same time</p></body></html>
- <html><head/><body><p>Sets the maximum number of objects Draft Edit</p><p>can process at the same time</p></body></html>
+ <html><head/><body><p>აყენებს ობიექტების მაქიმალურ რაოდენობას, რომელიც</p><p>ერთდროულად შეიძლება ჩასწორდეს</p></body></html>
@@ -7977,7 +8057,7 @@ This might fail for post DXF R12 templates.
The path to your ODA (formerly Teigha) File Converter executable
- The path to your ODA (formerly Teigha) File Converter executable
+ მისამართი ODA(ძველი სახელი Teigha) გადამყვანის გამშვებ ფაილებამდე
diff --git a/src/Mod/Draft/Resources/translations/Draft_lt.qm b/src/Mod/Draft/Resources/translations/Draft_lt.qm
index a3fdd425b3..475627d2a7 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_lt.qm and b/src/Mod/Draft/Resources/translations/Draft_lt.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_lt.ts b/src/Mod/Draft/Resources/translations/Draft_lt.ts
index c8fe88a38e..db9070027e 100644
--- a/src/Mod/Draft/Resources/translations/Draft_lt.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_lt.ts
@@ -722,11 +722,6 @@ This property is read-only, as the number depends on the points contained within
Area of this object
Area of this object
-
-
- The shape of this object
- Šio kūno pavidalas
-
The base object used by this object
@@ -737,6 +732,11 @@ This property is read-only, as the number depends on the points contained within
The PAT file used by this object
The PAT file used by this object
+
+
+ The shape of this object
+ Šio kūno pavidalas
+
The pattern name used by this object
@@ -1147,6 +1147,16 @@ beyond the dimension line
Line color
Linijos spalva
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1715,11 +1725,23 @@ The array can be turned into a polar or a circular array by changing its type.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Bezier curve
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1730,11 +1752,21 @@ CTRL to snap, SHIFT to constrain.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Bezier tools
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1792,11 +1824,25 @@ The resulting clone can be scaled in each of its three directions.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Cubic bezier curve
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2146,6 +2192,25 @@ It can also create an offset copy of the original object.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.
+
+ Draft_OrthoArray
+
+
+ Array
+ Masyvas
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+
+
Draft_PathArray
@@ -2860,14 +2925,6 @@ Once the object is created double click it in the tree view to restore the camer
Then you can use it to save a different camera position and objects' states any time you need.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Grupė
-
-
ImportAirfoilDAT
@@ -2936,6 +2993,11 @@ Then you can use it to save a different camera position and objects' states any
Arc tools
Arc tools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3084,16 +3146,16 @@ Then you can use it to save a different camera position and objects' states any
Auto
Automatiškai
-
-
- active command:
- atliekamas veiksmas:
-
None
Joks
+
+
+ active command:
+ atliekamas veiksmas:
+
Active Draft command
@@ -4188,6 +4250,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Merging layer:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -5034,8 +5101,8 @@ To enabled FreeCAD to download these libraries, answer Yes.
- Bezier curve has been closed
- Bezier curve has been closed
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5057,6 +5124,11 @@ To enabled FreeCAD to download these libraries, answer Yes.
Click and drag to define next knot
Click and drag to define next knot
+
+
+ Bezier curve has been closed
+ Bezier curve has been closed
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5397,6 +5469,11 @@ To enabled FreeCAD to download these libraries, answer Yes.
Group name
Group name
+
+
+ Group
+ Grupė
+
Select an object to offset
@@ -5558,6 +5635,14 @@ The final angle will be the base angle plus this amount.
successfully exported
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Grupė
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.qm b/src/Mod/Draft/Resources/translations/Draft_nl.qm
index 8841ab557e..d034301b27 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_nl.qm and b/src/Mod/Draft/Resources/translations/Draft_nl.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.ts b/src/Mod/Draft/Resources/translations/Draft_nl.ts
index 753914c67a..d8e1b89c48 100644
--- a/src/Mod/Draft/Resources/translations/Draft_nl.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_nl.ts
@@ -719,11 +719,6 @@ Deze eigenschap is alleen-lezen, omdat het getal afhankelijk is van de punten in
Area of this object
Het oppervlak van dit object
-
-
- The shape of this object
- De vorm van dit object
-
The base object used by this object
@@ -734,6 +729,11 @@ Deze eigenschap is alleen-lezen, omdat het getal afhankelijk is van de punten in
The PAT file used by this object
The PAT file used by this object
+
+
+ The shape of this object
+ De vorm van dit object
+
The pattern name used by this object
@@ -1144,6 +1144,16 @@ buiten de maatlijn
Line color
Lijnkleur
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1713,11 +1723,23 @@ De reeks kan worden omgezet in een polair of een circulaire reeks door het type
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Béziercurve
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1728,11 +1750,21 @@ CTRL om vast te klikken, SHIFT om te beperken.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Bézier-gereedschappen
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1790,11 +1822,25 @@ De resulterende kloon kan in elk van zijn drie richtingen worden geschaald.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Cubic bezier curve
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2143,6 +2189,25 @@ Het kan ook een verschoven kopie van het oorspronkelijke object maken.
CTRL om uit te lijnen, SHIFT om te beperken. Houd ALT ingedrukt en klik om een kopie te maken met elke klik.
+
+ Draft_OrthoArray
+
+
+ Array
+ Reeks
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Maakt kopieën van het geselecteerde object en plaatst de kopieën in een orthogonaal patroon,
+betekent dat de kopieën de opgegeven richting in de X, Y, Z assen volgen.
+
+De reeks kan worden omgezet in een polair of een circulaire reeks door het type te veranderen.
+
+
Draft_PathArray
@@ -2857,14 +2922,6 @@ Zodra het object is gemaakt, dubbelklik dan op het structuur scherm om de camera
Dan kun je het gebruiken om een andere camerapositie en objecten op te slaan wanneer je nodig hebt.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Groep
-
-
ImportAirfoilDAT
@@ -2933,6 +2990,11 @@ Dan kun je het gebruiken om een andere camerapositie en objecten op te slaan wan
Arc tools
Booggereedschappen
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3081,16 +3143,16 @@ Dan kun je het gebruiken om een andere camerapositie en objecten op te slaan wan
Auto
Automatisch
-
-
- active command:
- actieve opdracht:
-
None
Geen
+
+
+ active command:
+ actieve opdracht:
+
Active Draft command
@@ -4185,6 +4247,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Merging layer:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -5017,12 +5084,12 @@ Om FreeCAD in staat te stellen om deze bibliotheken te downloaden, antwoord Ja.<
(ON)
- (ON)
+ (AAN)
(OFF)
- (OFF)
+ (UIT)
@@ -5031,8 +5098,8 @@ Om FreeCAD in staat te stellen om deze bibliotheken te downloaden, antwoord Ja.<
- Bezier curve has been closed
- De bezier-curve is gesloten
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5054,6 +5121,11 @@ Om FreeCAD in staat te stellen om deze bibliotheken te downloaden, antwoord Ja.<
Click and drag to define next knot
Klik en sleep om de volgende knoop te definiëren
+
+
+ Bezier curve has been closed
+ De bezier-curve is gesloten
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5394,6 +5466,11 @@ Om FreeCAD in staat te stellen om deze bibliotheken te downloaden, antwoord Ja.<
Group name
Group name
+
+
+ Group
+ Groep
+
Select an object to offset
@@ -5555,6 +5632,14 @@ De eindhoek zal de basishoek plus dit getal zijn.
successfully exported
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Groep
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.qm b/src/Mod/Draft/Resources/translations/Draft_pl.qm
index b8f6424112..d79a8a1b79 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_pl.qm and b/src/Mod/Draft/Resources/translations/Draft_pl.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.ts b/src/Mod/Draft/Resources/translations/Draft_pl.ts
index cc891ca935..301a57b386 100644
--- a/src/Mod/Draft/Resources/translations/Draft_pl.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_pl.ts
@@ -721,11 +721,6 @@ Tę właściwość można tylko przeglądać, ponieważ liczba jest zależna od
Area of this object
Powierzchnia tego obiektu
-
-
- The shape of this object
- Kształt tego obiektu
-
The base object used by this object
@@ -736,6 +731,11 @@ Tę właściwość można tylko przeglądać, ponieważ liczba jest zależna od
The PAT file used by this object
Plik wzoru używany przez ten obiekt
+
+
+ The shape of this object
+ Kształt tego obiektu
+
The pattern name used by this object
@@ -1143,6 +1143,16 @@ beyond the dimension line
Line color
Kolor linii
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1582,7 +1592,7 @@ Utwórz najpierw grupę, aby użyć tego narzędzia.
Manage or create annotation styles
- Manage or create annotation styles
+ Zarządzaj lub twórz style adnotacji
@@ -1609,7 +1619,7 @@ Utwórz najpierw grupę, aby użyć tego narzędzia.
Creates a circular arc by a center point and a radius.
CTRL to snap, SHIFT to constrain.
- Tworzy łuk kołowy za pomocą punktu środkowego i promienia.
+ Tworzy łuk koła za pomocą punktu środkowego i promienia.
CTRL, aby przyciągnąć, SHIFT, aby utworzyć wiązanie.
@@ -1637,8 +1647,8 @@ CTRL, aby przyciągnąć, SHIFT, aby utworzyć wiązanie.
Creates a circular arc by picking 3 points.
CTRL to snap, SHIFT to constrain.
- Creates a circular arc by picking 3 points.
-CTRL to snap, SHIFT to constrain.
+ Tworzy łuk kołowy przez wskazane trzech punktów.
+CTRL, aby przyciągnąć, SHIFT, aby utworzyc wiązanie.
@@ -1713,11 +1723,23 @@ CTRL aby przyciągnąć, SHIFT aby związać.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Krzywa Beziera
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1728,11 +1750,21 @@ CTRL, aby przyciągnąć, SHIFT, aby ograniczyć.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Narzędzia Beziera
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1790,11 +1822,25 @@ Uzyskany klon może być skalowany w każdym z trzech kierunków.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Sześcienna krzywa Beziera
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2145,6 +2191,25 @@ Może również tworzyć odsuniętą kopię oryginalnego obiektu.
CTRL, aby przyciągnąć, SHIFT, aby ograniczyć. Przytrzymaj ALT i kliknij, aby utworzyć kopię przy każdym kliknięciu.
+
+ Draft_OrthoArray
+
+
+ Array
+ Szyk
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Tworzy kopie wybranego obiektu i umieszcza kopie w ortogonalnym wzorze,
+oznacza, że kopie przebiegają zgodnie z określonym kierunkiem w osiach X, Y, Z.
+
+Tablicę można przekształcić w tablicę polarną lub okrągłą, zmieniając jej typ.
+
+
Draft_PathArray
@@ -2558,7 +2623,7 @@ prostych linii projektowych, które są rysowane w płaszczyźnie XY. Wybrane ob
Main snapping toggle On/Off
- Włącz/wyłącz główną opcję przyciągania
+ Włącz/wyłącz globalną opcję przyciągania
@@ -2861,14 +2926,6 @@ Po utworzeniu obiektu kliknij go dwukrotnie w widoku drzewa, aby przywrócić po
Następnie można go użyć do zapisania innej pozycji ujęcia widoku i stanów obiektów w dowolnie wybranym momencie.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Grupa
-
-
ImportAirfoilDAT
@@ -2937,6 +2994,11 @@ Następnie można go użyć do zapisania innej pozycji ujęcia widoku i stanów
Arc tools
Narzędzia łuku
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3085,16 +3147,16 @@ Następnie można go użyć do zapisania innej pozycji ujęcia widoku i stanów
Auto
Automatycznie
-
-
- active command:
- aktywne polecenie:
-
None
Brak
+
+
+ active command:
+ aktywne polecenie:
+
Active Draft command
@@ -4189,6 +4251,11 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele
Merging layer:
Scalanie warstw:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -4202,7 +4269,7 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele
Unable to convert input into a scale factor
- Unable to convert input into a scale factor
+ Nie można przekonwertować danych wejściowych według współczynnika skali
@@ -4212,7 +4279,7 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele
Set custom scale
- Set custom scale
+ Ustaw skalę rysunku
@@ -4222,7 +4289,7 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele
Set the scale used by draft annotation tools
- Set the scale used by draft annotation tools
+ Ustaw skalę używaną przez narzędzia do tworzenia opisów
@@ -4312,77 +4379,77 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele
Snap Lock
- Snap Lock
+ Przełącz przyciąganie
Snap Endpoint
- Snap Endpoint
+ Przyciągnij do końca
Snap Midpoint
- Snap Midpoint
+ Przyciągnij do środka odcinka
Snap Center
- Snap Center
+ Przyciągnij do środka
Snap Angle
- Snap Angle
+ Przyciągnij do kąta
Snap Intersection
- Snap Intersection
+ Przyciągnij do punktu przecięcia
Snap Perpendicular
- Snap Perpendicular
+ Przyciągnij prostopadle
Snap Extension
- Snap Extension
+ Przyciągnij do wydłużenia
Snap Parallel
- Snap Parallel
+ Przyciągnij równolegle
Snap Special
- Snap Special
+ Przyciągnij specjalnie
Snap Near
- Snap Near
+ Przyciągnij do najbliższego
Snap Ortho
- Snap Ortho
+ Przyciągnij ortogonalnie
Snap Grid
- Snap Grid
+ Przyciągnij do siatki
Snap WorkingPlane
- Snap WorkingPlane
+ Przyciągnij do płaszczyzny roboczej
Snap Dimensions
- Snap Dimensions
+ Przyciągnij do wymiaru
@@ -5020,12 +5087,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
(ON)
- (ON)
+ (Włącz)
(OFF)
- (OFF)
+ (Wyłącz)
@@ -5034,8 +5101,8 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
- Bezier curve has been closed
- Krzywa Beziera została zamknięta
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5057,6 +5124,11 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
Click and drag to define next knot
Kliknij i przeciągnij, aby zdefiniować następny węzeł
+
+
+ Bezier curve has been closed
+ Krzywa Beziera została zamknięta
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5397,6 +5469,11 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
Group name
Nazwa grupy
+
+
+ Group
+ Grupa
+
Select an object to offset
@@ -5558,6 +5635,14 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość.wyeksportowano pomyślnie
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Grupa
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm
index 0853cee5d5..8e43046165 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm and b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts
index ff643ec8e5..90f86f7b2e 100644
--- a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts
@@ -128,7 +128,7 @@ Deixe essa propriedade vazia para poder definir 'Axis' e 'Centro' manualmente.
A parameter that determines how many symmetry planes the circular array will have.
- A parameter that determines how many symmetry planes the circular array will have.
+ Um parâmetro que determina quantos planos de simetria terá a rede circular.
@@ -236,13 +236,13 @@ There are various possibilities:
- An object, and one of its edges.
- An object, and two of its vertices.
- An arc object, and its edge.
- The object, and specific subelements of it,
-that this dimension object is measuring.
+ O objeto e sub-elementos específicos dele,
+que este objeto de dimensão está sendo medido.
-There are various possibilities:
-- An object, and one of its edges.
-- An object, and two of its vertices.
-- An arc object, and its edge.
+Existem várias possibilidades:
+- Um objeto, e uma de suas bordas.
+- Um objeto e dois de seus vértices.
+- Um objeto de arco e sua aresta.
@@ -718,11 +718,6 @@ Esta propriedade é somente leitura, já que o número depende dos outros parâm
Area of this object
Área deste objeto
-
-
- The shape of this object
- A forma deste objeto
-
The base object used by this object
@@ -733,6 +728,11 @@ Esta propriedade é somente leitura, já que o número depende dos outros parâm
The PAT file used by this object
O arquivo PAT usado por este objeto
+
+
+ The shape of this object
+ A forma deste objeto
+
The pattern name used by this object
@@ -1140,6 +1140,16 @@ beyond the dimension line
Line color
Cor da linha
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1528,7 +1538,7 @@ Cria um grupo de construção se não existir.
Add a new named group
- Add a new named group
+ Adicionar um novo grupo nomeado
@@ -1579,7 +1589,7 @@ Crie um grupo primeiro para usar esta ferramenta.
Manage or create annotation styles
- Manage or create annotation styles
+ Gerenciar ou criar estilos de anotação
@@ -1709,11 +1719,23 @@ A rede pode ser transformada em uma rede polar ou circular alterando seu tipo.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Curva de Bezier
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1724,11 +1746,21 @@ CTRL para snap, SHIFT para restringir.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Ferramentas de Bezier
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1786,11 +1818,25 @@ O clone resultante pode ser dimensionado em cada uma de suas três direções.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Curva bezier cúbica
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2140,6 +2186,25 @@ Ele também pode criar uma cópia deslocada do objeto original.
CTRL para snap, SHIFT para restringir. Mantenha ALT e clique para criar uma cópia com cada clique.
+
+ Draft_OrthoArray
+
+
+ Array
+ Matriz
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Cria cópias do objeto selecionado e coloca as cópias em um padrão ortogonal,
+isto é, as cópias seguem a direção especificada nos eixos X, Y, Z.
+
+A rede pode ser transformada em uma rede polar ou circular alterando seu tipo.
+
+
Draft_PathArray
@@ -2852,14 +2917,6 @@ Uma vez que o objeto for criado, dê um clique duplo no ícone na árvore para r
Você pode usá-lo para salvar uma posição diferente de câmera e estados de objetos sempre que precisar.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Grupo
-
-
ImportAirfoilDAT
@@ -2928,6 +2985,11 @@ Você pode usá-lo para salvar uma posição diferente de câmera e estados de o
Arc tools
Ferramentas de arco
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3076,16 +3138,16 @@ Você pode usá-lo para salvar uma posição diferente de câmera e estados de o
Auto
Auto
-
-
- active command:
- comando ativo:
-
None
Nenhum
+
+
+ active command:
+ comando ativo:
+
Active Draft command
@@ -3524,7 +3586,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
LibreDWG error
- LibreDWG error
+ Erro de LibreDWG
@@ -3539,22 +3601,22 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version.
- Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version.
+ Erro durante a conversão DWG. Tente mover o arquivo DWG para um caminho de diretório sem espaços e caracteres que não estejam em inglês, ou tente salvar em uma versão DWG inferior.
ODA File Converter not found
- ODA File Converter not found
+ Conversor de Arquivos ODA não encontrado
QCAD error
- QCAD error
+ Erro no QCAD
All Shapes must be coplanar
- All Shapes must be coplanar
+ Todas as formas devem ser coplanares
@@ -3993,7 +4055,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
No shape found
- No shape found
+ Nenhuma forma encontrada
@@ -4062,12 +4124,12 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Wrong input: label_type must be a string.
- Wrong input: label_type must be a string.
+ Entrada errada: label_type deve ser uma string.
Wrong input: label_type must be one of the following:
- Wrong input: label_type must be one of the following:
+ Entrada errada: label_type deve ser um dos seguintes:
@@ -4179,6 +4241,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Combinando camada:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -4192,7 +4259,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Unable to convert input into a scale factor
- Unable to convert input into a scale factor
+ Não é possível converter a entrada em um fator de escala
@@ -4202,7 +4269,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Set custom scale
- Set custom scale
+ Definir escala personalizada
@@ -5024,8 +5091,8 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim.
- Bezier curve has been closed
- A curva de Bezier foi fechada
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5047,6 +5114,11 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim.
Click and drag to define next knot
Clique e arraste para definir o próximo nó
+
+
+ Bezier curve has been closed
+ A curva de Bezier foi fechada
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5387,6 +5459,11 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim.
Group name
Nome do grupo
+
+
+ Group
+ Grupo
+
Select an object to offset
@@ -5547,6 +5624,14 @@ The final angle will be the base angle plus this amount.
exportado com sucesso
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Grupo
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm b/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm
index eec8581987..1accd9a20e 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm and b/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts
index 2f28ed0729..29ad94f1dc 100644
--- a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts
@@ -720,11 +720,6 @@ Esta propriedade é apenas-de-leitura, já que o número depende dos pontos cont
Area of this object
Área deste objeto
-
-
- The shape of this object
- A forma deste objeto
-
The base object used by this object
@@ -735,6 +730,11 @@ Esta propriedade é apenas-de-leitura, já que o número depende dos pontos cont
The PAT file used by this object
The PAT file used by this object
+
+
+ The shape of this object
+ A forma deste objeto
+
The pattern name used by this object
@@ -1144,6 +1144,16 @@ além da linha de cota
Line color
Cor da linha
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1711,11 +1721,23 @@ A matriz pode ser transformada em polar numa matriz circular alterando seu tipo.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Curva de Bezier
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1726,11 +1748,21 @@ CTRL para alinhamento e atração, SHIFT para restringir.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Ferramentas de Bezier
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1788,11 +1820,25 @@ O clone resultante pode ser escalado em cada uma de suas três direções.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Cubic bezier curve
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2141,6 +2187,25 @@ It can also create an offset copy of the original object.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.
+
+ Draft_OrthoArray
+
+
+ Array
+ Matriz
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Cria cópias do objeto selecionado e coloca as cópias num padrão ortogonal
+significa que as cópias seguem a direção especificada nos eixos X, Y, Z.
+
+A matriz pode ser transformada em polar numa matriz circular alterando seu tipo.
+
+
Draft_PathArray
@@ -2855,14 +2920,6 @@ Uma vez o objeto criado, clique duas vezes no ícone na vista em árvore para re
Então você pode usá-la para salvar uma posição diferente de câmara e estados de objetos sempre que precisar.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Grupo
-
-
ImportAirfoilDAT
@@ -2931,6 +2988,11 @@ Então você pode usá-la para salvar uma posição diferente de câmara e estad
Arc tools
Ferramentas de arco
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3079,16 +3141,16 @@ Então você pode usá-la para salvar uma posição diferente de câmara e estad
Auto
Auto
-
-
- active command:
- Comando ativo:
-
None
Nenhum
+
+
+ active command:
+ Comando ativo:
+
Active Draft command
@@ -4183,6 +4245,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Merging layer:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -5025,8 +5092,8 @@ Para permitir ao FreeCAD baixar essas bibliotecas, responder sim.
- Bezier curve has been closed
- Bezier curve has been closed
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5048,6 +5115,11 @@ Para permitir ao FreeCAD baixar essas bibliotecas, responder sim.
Click and drag to define next knot
Click and drag to define next knot
+
+
+ Bezier curve has been closed
+ Bezier curve has been closed
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5388,6 +5460,11 @@ Para permitir ao FreeCAD baixar essas bibliotecas, responder sim.
Group name
Group name
+
+
+ Group
+ Grupo
+
Select an object to offset
@@ -5549,6 +5626,14 @@ The final angle will be the base angle plus this amount.
exportado com sucesso
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Grupo
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.qm b/src/Mod/Draft/Resources/translations/Draft_ro.qm
index 618b7b47cb..dcd5a6e8ef 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_ro.qm and b/src/Mod/Draft/Resources/translations/Draft_ro.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.ts b/src/Mod/Draft/Resources/translations/Draft_ro.ts
index 5d78dca771..917a3073fe 100644
--- a/src/Mod/Draft/Resources/translations/Draft_ro.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_ro.ts
@@ -721,11 +721,6 @@ Această proprietate este doar pentru citire, deoarece numărul depinde de punct
Area of this object
Area of this object
-
-
- The shape of this object
- Forma acestui obiect
-
The base object used by this object
@@ -736,6 +731,11 @@ Această proprietate este doar pentru citire, deoarece numărul depinde de punct
The PAT file used by this object
The PAT file used by this object
+
+
+ The shape of this object
+ Forma acestui obiect
+
The pattern name used by this object
@@ -1145,6 +1145,16 @@ dincolo de linia de cotă
Line color
Culoarea liniei
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1712,11 +1722,23 @@ The array can be turned into a polar or a circular array by changing its type.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Bezier curve
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1727,11 +1749,21 @@ CTRL to snap, SHIFT to constrain.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Bezier tools
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1789,11 +1821,25 @@ The resulting clone can be scaled in each of its three directions.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Cubic bezier curve
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2143,6 +2189,25 @@ It can also create an offset copy of the original object.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.
+
+ Draft_OrthoArray
+
+
+ Array
+ Matrice
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+
+
Draft_PathArray
@@ -2857,14 +2922,6 @@ Once the object is created double click it in the tree view to restore the camer
Then you can use it to save a different camera position and objects' states any time you need.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Grup
-
-
ImportAirfoilDAT
@@ -2933,6 +2990,11 @@ Then you can use it to save a different camera position and objects' states any
Arc tools
Unelte pentru arcuri de cerc
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3081,16 +3143,16 @@ Then you can use it to save a different camera position and objects' states any
Auto
Automat
-
-
- active command:
- Comanda activă:
-
None
Niciunul
+
+
+ active command:
+ Comanda activă:
+
Active Draft command
@@ -4185,6 +4247,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Merging layer:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -5024,8 +5091,8 @@ To enabled FreeCAD to download these libraries, answer Yes.
- Bezier curve has been closed
- Bezier curve has been closed
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5047,6 +5114,11 @@ To enabled FreeCAD to download these libraries, answer Yes.
Click and drag to define next knot
Click and drag to define next knot
+
+
+ Bezier curve has been closed
+ Bezier curve has been closed
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5387,6 +5459,11 @@ To enabled FreeCAD to download these libraries, answer Yes.
Group name
Group name
+
+
+ Group
+ Grup
+
Select an object to offset
@@ -5548,6 +5625,14 @@ The final angle will be the base angle plus this amount.
successfully exported
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Grup
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.qm b/src/Mod/Draft/Resources/translations/Draft_ru.qm
index a99dbdbf4e..ae61227563 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_ru.qm and b/src/Mod/Draft/Resources/translations/Draft_ru.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.ts b/src/Mod/Draft/Resources/translations/Draft_ru.ts
index 51d4d6a010..f6d2b6de06 100644
--- a/src/Mod/Draft/Resources/translations/Draft_ru.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_ru.ts
@@ -718,11 +718,6 @@ This property is read-only, as the number depends on the points contained within
Area of this object
Площадь объекта
-
-
- The shape of this object
- Форма этого объекта
-
The base object used by this object
@@ -733,6 +728,11 @@ This property is read-only, as the number depends on the points contained within
The PAT file used by this object
PAT-файл, используется данным объектом
+
+
+ The shape of this object
+ Форма этого объекта
+
The pattern name used by this object
@@ -1140,6 +1140,16 @@ beyond the dimension line
Line color
Цвет линии
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1577,7 +1587,7 @@ Create a group first to use this tool.
Manage or create annotation styles
- Manage or create annotation styles
+ Управление или создание стилей заметок
@@ -1631,8 +1641,8 @@ CTRL to snap, SHIFT to constrain.
Creates a circular arc by picking 3 points.
CTRL to snap, SHIFT to constrain.
- Creates a circular arc by picking 3 points.
-CTRL to snap, SHIFT to constrain.
+ Создаёт дугу окружности, выбрав 3 точки.
+CTRL для привязки, SHIFT для ограничения.
@@ -1706,11 +1716,23 @@ The array can be turned into a polar or a circular array by changing its type.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Кривая Безье
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1721,11 +1743,21 @@ CTRL для привязки, SHIFT для ограничения.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Инструменты Безье
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1782,11 +1814,25 @@ The resulting clone can be scaled in each of its three directions.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Кубическая кривая Безье
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2136,6 +2182,25 @@ It can also create an offset copy of the original object.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.
+
+ Draft_OrthoArray
+
+
+ Array
+ Массив
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+
+
Draft_PathArray
@@ -2849,14 +2914,6 @@ Once the object is created double click it in the tree view to restore the camer
Then you can use it to save a different camera position and objects' states any time you need.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Группа
-
-
ImportAirfoilDAT
@@ -2925,6 +2982,11 @@ Then you can use it to save a different camera position and objects' states any
Arc tools
Инструменты построения дуги
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3073,16 +3135,16 @@ Then you can use it to save a different camera position and objects' states any
Auto
Авто
-
-
- active command:
- Текущая команда:
-
None
Ничего
+
+
+ active command:
+ Текущая команда:
+
Active Draft command
@@ -4176,6 +4238,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Merging layer:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -4189,7 +4256,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Unable to convert input into a scale factor
- Unable to convert input into a scale factor
+ Невозможно преобразовать ввод в коэффициент масштаба
@@ -4199,7 +4266,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Set custom scale
- Set custom scale
+ Установить свой масштаб
@@ -4209,7 +4276,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Set the scale used by draft annotation tools
- Set the scale used by draft annotation tools
+ Установите масштаб масштаба, используемый черновиками аннотаций
@@ -4299,77 +4366,77 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Snap Lock
- Snap Lock
+ Закрепить
Snap Endpoint
- Snap Endpoint
+ Привязка конечной точки
Snap Midpoint
- Snap Midpoint
+ Привязка к середине
Snap Center
- Snap Center
+ Центр привязки
Snap Angle
- Snap Angle
+ Угол привязки
Snap Intersection
- Snap Intersection
+ Привязка пересечение
Snap Perpendicular
- Snap Perpendicular
+ Привязка перпендикуляр
Snap Extension
- Snap Extension
+ Привязка расширение
Snap Parallel
- Snap Parallel
+ Привязка параллельно
Snap Special
- Snap Special
+ Специальная привязка
Snap Near
- Snap Near
+ Привязка к ближайшей
Snap Ortho
- Snap Ortho
+ Привязка орто
Snap Grid
- Snap Grid
+ Привязка к сетке
Snap WorkingPlane
- Snap WorkingPlane
+ Привязка к рабочей плоскости
Snap Dimensions
- Snap Dimensions
+ Привязка к размерам
@@ -5007,12 +5074,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
(ON)
- (ON)
+ (ВКЛ)
(OFF)
- (OFF)
+ (ОТКЛ)
@@ -5021,8 +5088,8 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
- Bezier curve has been closed
- Bezier curve has been closed
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5044,6 +5111,11 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
Click and drag to define next knot
Click and drag to define next knot
+
+
+ Bezier curve has been closed
+ Bezier curve has been closed
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5384,6 +5456,11 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
Group name
Название группы
+
+
+ Group
+ Группа
+
Select an object to offset
@@ -5545,6 +5622,14 @@ The final angle will be the base angle plus this amount.
успешно экспортировано
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Группа
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.qm b/src/Mod/Draft/Resources/translations/Draft_sl.qm
index 0a590858af..efbd8681b1 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_sl.qm and b/src/Mod/Draft/Resources/translations/Draft_sl.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.ts b/src/Mod/Draft/Resources/translations/Draft_sl.ts
index e0e5d8b196..9f2a6dfcd7 100644
--- a/src/Mod/Draft/Resources/translations/Draft_sl.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_sl.ts
@@ -564,7 +564,7 @@ ali s podprvine "NOglišč", "NRobov" ali "NPloskev", če je določeno.
Force sync pattern placements even when array elements are expanded
- Force sync pattern placements even when array elements are expanded
+ Vsili usklajeni vzorec postavitve tudi, ko so razpostavljeni predmeti razširjeni
@@ -717,11 +717,6 @@ Ta lastnost je le za branje, saj je število odvisno od točk znotraj "Točkovne
Area of this object
Površina tega predmeta
-
-
- The shape of this object
- Oblika tega objekta
-
The base object used by this object
@@ -732,6 +727,11 @@ Ta lastnost je le za branje, saj je število odvisno od točk znotraj "Točkovne
The PAT file used by this object
Datoteka PAT, ki jo uporablja ta predmet
+
+
+ The shape of this object
+ Oblika tega objekta
+
The pattern name used by this object
@@ -1142,6 +1142,16 @@ preko kotnice
Line color
Barva črte
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1218,7 +1228,7 @@ preko kotnice
Draft utility tools
- Snovalni pripomočki
+ Izrisovalni pripomočki
@@ -1402,22 +1412,22 @@ iz menija Orodja -> Upravljalnik vstavkov
Draft creation tools
- Orodja za ustvarjanje osnutkov
+ Orodja za izdelavo izrisa
Draft annotation tools
- Orodja za opisovanje osnutkov
+ Orodja za opisovanje izrisov
Draft modification tools
- Orodja za preoblikovanje osnutkov
+ Orodja za preoblikovanje izrisov
&Drafting
- Priprava &osnutka
+ &Izrisovanje
@@ -1575,12 +1585,12 @@ Create a group first to use this tool.
Annotation styles...
- Pripisni slogi ...
+ Pripisni slogi ...
Manage or create annotation styles
- Manage or create annotation styles
+ Uredi ali ustvari sloge pripisov
@@ -1635,8 +1645,8 @@ CTRL za pripenjanje, PREMAKNI za omejitev.
Creates a circular arc by picking 3 points.
CTRL to snap, SHIFT to constrain.
- Creates a circular arc by picking 3 points.
-CTRL to snap, SHIFT to constrain.
+ Ustvari krožni lok z določitvijo 3 točk.
+CTRL za pripenjanje, PREMAKNI za omejitev.
@@ -1692,7 +1702,7 @@ Razpostavitev lahko spremenite v krožno ali v obročno razpostavitev s sprememb
Select a group to add all Draft and Arch objects to.
- Izberite skupino, v kateroželite dodati vse predmete osnutka in arhitekture.
+ Izberite skupino, v katero želite dodati vse predmete izrisa (Draft) in arhitekture (Arch).
@@ -1710,11 +1720,23 @@ Razpostavitev lahko spremenite v krožno ali v obročno razpostavitev s sprememb
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Bezierova krivulja
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1725,11 +1747,21 @@ CTRL za pripenjanje, PREMAKNI za omejitev.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Bezierjeva orodja
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1786,11 +1818,25 @@ Dobljeni klon je mogoče prevelikostiti v vseh treh smereh.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Kubična bezierjeva kribulja
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -1835,16 +1881,16 @@ You may also select an 'App::MeasureDistance' object before launching this comma
to turn it into a 'Draft Dimension' object.
Ustvari koto.
-- Izberite tri točke, da ustvarite eostavno premo koto.
+- Izberite tri točke, da ustvarite enostavno premo koto.
- Izberite ravno črto, da ustvarite premo koto, vezano na to črto.
-- Izberite lok ali krog, da ustvarite pomerno ali premerno koto, vezano na ta lok.
+- Izberite lok ali krog, da ustvarite polmerno ali premerno koto, vezano na ta lok.
- Izberite dve ravni črti, da ustvarite kotno koto med njima.
CTRL za pripenjanje, PREMAKNI za omejitev, ALT da izberete rob ali lok.
-Preden zažene ta ukaz lahko izberete eno samo črto ali en kroni lok,
+Preden zažene ta ukaz lahko izberete eno samo črto ali en krožni lok,
da ustvarite odgovarjajočo vezano koto.
Lahko pa, preden zaženete ta ukaz, izberete predmet "App::IzmeriRazdaljo",
-ki se spremeni v predmet "OsnutkovaKota".
+ki se spremeni v predmet "IzrisnaKota".
@@ -1869,16 +1915,16 @@ Npr. površja razbije v enostavnjše ploskve in črtovja, ter nato na robove. Pr
Draft to Sketch
- Osnutek v očrt
+ Izris (Draft) v očrt (Sketch)
Convert bidirectionally between Draft objects and Sketches.
Many Draft objects will be converted into a single non-constrained Sketch.
However, a single sketch with disconnected traces will be converted into several individual Draft objects.
- Dvosmerno pretvarjanje med predmeti Osnutka in Očrti.
-Številni predmeti Osnutka se bodo pretvorili v posamezne neomejene Očrte,
-medtem ko bo en sam očrt z nepovezanimi sledmi pretvorjen v več posamičnih premetov Osnutka.
+ Dvosmerno pretvarjanje med predmeti izrisa (Draft) in očrti (Sketch).
+Številni izrisni predmeti se bodo pretvorili v posamezne neomejene očrte,
+medtem ko bo en sam očrt z nepovezanimi sledmi pretvorjen v več posamičnih premetov izrisa (Draft).
@@ -1999,7 +2045,7 @@ If other objects are selected they are ignored.
Heal faulty Draft objects saved with an earlier version of the program.
If an object is selected it will try to heal that object in particular,
otherwise it will try to heal all objects in the active document.
- Popravi okvarjene predmete Osnutka, shranjene s starejšo različico programa.
+ Popravi okvarjene predmete Izrisa, shranjene s starejšo različico programa.
Če je izbran predmet, se bo skušalo popraviti prav ta predmet,
sicer pa se bo popravljalo vse predmete v dejavnem dokumentu.
@@ -2137,6 +2183,25 @@ Ustvari lahko tudi odmaknjen dvojnik izvirnega predmeta.
CTRL za pripenjanje, PREMAKNI za omejitev. Držite ALT in z vsakim klikom ustvarite nov dvojnik.
+
+ Draft_OrthoArray
+
+
+ Array
+ Razpostavitev
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Ustvari kopije izbranega predmeta in jih postavi v pravokotnem vzorcu,
+to pomeni da kopije sledijo določeni smeri v X, Y in Z oseh.
+
+Razpostavitev lahko spremenite v krožno ali v obročno razpostavitev s spremembo njene vrste.
+
+
Draft_PathArray
@@ -2234,7 +2299,7 @@ Select the base object, and then select the compound or the sketch to create the
Točke morajo biti pred uporabo tega orodja združene v sestav.
Če želita ustvariti tak sestav, izberite različne točke in nato uporabite orodje Sestav delov,
-lahko uporabite tudi orodje Nadgraditev osnutka in z njim ustvarite "Zbir", ali pa ustvarite očrt in mu dodate enostavne točke.
+lahko uporabite tudi orodje Nadgraditev izrisa in z njim ustvarite "Zbir", ali pa ustvarite očrt in mu dodate enostavne točke.
Izberite izhodiščni predmet in nato sestav oz. očrt, da ustvarite razpostavitev točk.
@@ -2284,7 +2349,7 @@ Razpostavitev lahko spremenite v pravokotno ali v obročno tako, da spremite nje
Creates a regular polygon (triangle, square, pentagon, ...), by defining the number of sides and the circumscribed radius.
CTRL to snap, SHIFT to constrain
- Ustvari pravilni mnogokotnik (trikotnik, kvadrat, petkotnik, ...) z določitvijo števila stranic in polmera očrtanega kroga.
+ Ustvari pravilni mnogokotnik (trikotnik, kvadrat, petkotnik, ...) z določitvijo števila stranic in polmera očrtanega kroga.
CTRL za pripenjanje, PREMAKNI za omejitev
@@ -2368,8 +2433,8 @@ those that are at the same level as this object, including the upper group that
Select the face of solid body to create a working plane on which to sketch Draft objects.
You may also select a three vertices or a Working Plane Proxy.
- Izberite ploskev polnega telesa, na kateri želite ustvariti delovno ravnino za očrtovanje Osnutkov.
-Izberete lahko tudi tri oglišča ali nadomestek Delavne ravnine.
+ Izberite ploskev polnega telesa, na kateri želite ustvariti delovno ravnino za očrtovanje izrisnih predmetov.
+Izberete lahko tudi tri oglišča ali nadomestno delavno ravnino.
@@ -2449,7 +2514,7 @@ straight Draft lines that are drawn in the XY plane. Selected objects that aren'
Nastavi naklon izbrane črte s spreminjanjem vrednosti Z enemu od oglišč.
Če izberete črtovje, bo sprememba naklona uveljavljena na vsakem njegovem odseku.
-Naklon vedno spremeni vrednost Z, zato ta ukaz dobro deluje le pri ravnih črtah, narisanih v ravnini XY.
+Naklon vedno spremeni vrednost Z, zato ta ukaz dobro deluje le pri ravnih črtah izrisa, narisanih v ravnini XY.
Izbrani predmeti, ki niso posamezne črte, bodo prezrti.
@@ -2771,7 +2836,7 @@ Možnost je namenjena delu s sklenjenimi oblikami in telesi, saj nima vpliva na
Toggles the Draft grid on and off.
- Vklopi/izklopi mrežo osnutka.
+ Vklopi/izklopi mrežo izrisa.
@@ -2851,14 +2916,6 @@ Ko je predmet enkrat ustvarjen, z dvoklikom nanj v drevesnem pogledu povrnete po
Nadomestek delovne ravnine lahko kadarkoli služi tudi shranjevanju različnih položajev kamere in stanj predmetov.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Skupina
-
-
ImportAirfoilDAT
@@ -2885,27 +2942,27 @@ Nadomestek delovne ravnine lahko kadarkoli služi tudi shranjevanju različnih p
Draft creation tools
- Orodja za ustvarjanje osnutkov
+ Draft creation tools
Draft annotation tools
- Orodja za opisovanje osnutkov
+ Draft annotation tools
Draft modification tools
- Orodja za preoblikovanje osnutkov
+ Draft modification tools
Draft utility tools
- Snovalni pripomočki
+ Izrisovalni pripomočki
&Drafting
- Priprava &osnutka
+ &Izrisovanje
@@ -2927,6 +2984,11 @@ Nadomestek delovne ravnine lahko kadarkoli služi tudi shranjevanju različnih p
Arc tools
Ločna orodja
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -2940,7 +3002,7 @@ Nadomestek delovne ravnine lahko kadarkoli služi tudi shranjevanju različnih p
Draft Snap
- Pripenjanje v osnutku
+ Pripenjanje pri izrisovanju
@@ -3053,7 +3115,7 @@ Nadomestek delovne ravnine lahko kadarkoli služi tudi shranjevanju različnih p
Draft Command Bar
- Ukazna vrstica osnutkov
+ Izrisovalna ukazna vrstica
@@ -3075,20 +3137,20 @@ Nadomestek delovne ravnine lahko kadarkoli služi tudi shranjevanju različnih p
Auto
Samodejno
-
-
- active command:
- dejaven ukaz:
-
None
Brez
+
+
+ active command:
+ dejaven ukaz:
+
Active Draft command
- Dejaven ukaz osnutka
+ Dejaven izrisovalni ukaz
@@ -3189,7 +3251,7 @@ Odoznačite, če želite uporabljati koordinatni sistem delavne ravnineCheck this if the object should appear as filled, otherwise it will appear as wireframe.
Not available if Draft preference option 'Use Part Primitives' is enabled
Označite, če želite, da se predmet prikaže kot poln, sicer bo videti kot žični model.
-Ta možnost ni na voljo, če je v lastnostih očrta možnost "Uporabi osnovnike dela" omogočena
+Ta možnost ni na voljo, če je v prednastavitvah izrisovanja možnost "Uporabi delove osnovnike" omogočena
@@ -3264,7 +3326,7 @@ Ta možnost ni na voljo, če je v lastnostih očrta možnost "Uporabi osnovnike
If checked, objects will be copied instead of moved. Preferences -> Draft -> Global copy mode to keep this mode in next commands
- Če je označeno, se predmete kopira namesto premika. Prednastavitve -> Osnutek -> Splošni način kopiranja, da ohranite ta način pri sledečih ukazih
+ Če je označeno, se predmete kopira namesto premika. Prednastavitve -> Izris (Draft) -> Splošni način kopiranja, da ohranite ta način pri sledečih ukazih
@@ -3621,7 +3683,7 @@ Ta možnost ni na voljo, če je v lastnostih očrta možnost "Uporabi osnovnike
Found 1 non-parametric objects: draftifying it
- Najden 1 nedoločilovni predmet: spreminjanje v osnutek
+ Najden 1 nedoločilovni predmet: spreminjanje v izris
@@ -3651,7 +3713,7 @@ Ta možnost ni na voljo, če je v lastnostih očrta možnost "Uporabi osnovnike
Found 1 object: draftifying it
- Najden 1 predmet: spreminjanje v osnutek
+ Najden 1 predmet: spreminjanje v izris
@@ -4147,7 +4209,7 @@ Ta možnost ni na voljo, če je v lastnostih očrta možnost "Uporabi osnovnike
migrated 'DraftText' type to 'Text'
- preseljen slog "Besedila osnutka" v "Besedilo"
+ preseljen slog "Besedila izrisa" v "Besedilo"
@@ -4179,6 +4241,11 @@ Ta možnost ni na voljo, če je v lastnostih očrta možnost "Uporabi osnovnike
Merging layer:
Združevanje sloja:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -4192,7 +4259,7 @@ Ta možnost ni na voljo, če je v lastnostih očrta možnost "Uporabi osnovnike
Unable to convert input into a scale factor
- Unable to convert input into a scale factor
+ Vnešenega ni mogoče pretvoriti v količnik velikosti
@@ -4202,7 +4269,7 @@ Ta možnost ni na voljo, če je v lastnostih očrta možnost "Uporabi osnovnike
Set custom scale
- Set custom scale
+ Merilo po meri
@@ -4212,7 +4279,7 @@ Ta možnost ni na voljo, če je v lastnostih očrta možnost "Uporabi osnovnike
Set the scale used by draft annotation tools
- Set the scale used by draft annotation tools
+ Nastavi pripisnim orodjem izrisa merilo
@@ -4302,82 +4369,82 @@ Ta možnost ni na voljo, če je v lastnostih očrta možnost "Uporabi osnovnike
Snap Lock
- Snap Lock
+ Zaklep pripenjanja
Snap Endpoint
- Snap Endpoint
+ Pripenjanje na krajišče
Snap Midpoint
- Snap Midpoint
+ Pripenjanje na razpolovišče
Snap Center
- Snap Center
+ Pripenjanje na središče
Snap Angle
- Snap Angle
+ Pripenjanje na kot
Snap Intersection
- Snap Intersection
+ Pripenjanje na sečišče
Snap Perpendicular
- Snap Perpendicular
+ Pripenjanje na pravokotnico
Snap Extension
- Snap Extension
+ Pripenjanje na podaljšek
Snap Parallel
- Snap Parallel
+ Pripenjanje na vzporednost
Snap Special
- Snap Special
+ Posebno pripenjanje
Snap Near
- Snap Near
+ Pripenjanje na bližino
Snap Ortho
- Snap Ortho
+ Pripenjanje na pravokotnost
Snap Grid
- Snap Grid
+ Pripenjanje na mrežo
Snap WorkingPlane
- Snap WorkingPlane
+ Pripenjanje na delavno ravnino
Snap Dimensions
- Snap Dimensions
+ Pripenjanje na kote
Toggle Draft Grid
- Preklopi mrežo osnutka
+ Preklopi izrisovalno mrežo
@@ -4617,7 +4684,7 @@ To enabled FreeCAD to download these libraries, answer Yes.
Knjižnic za uvoz/izvoz DXF, ki jih FreeCAD potrebuje za ravnanje
z zapisom DXF, na tem sistemu ni mogoče najti.
Lahko omogočite FreeCADu prenos teh knjižnic:
- 1 - naložite delovno okolje za osnutke
+ 1 - naložite izrisovalno delovno okolje (Draft)
2 - meni Uredi > Prednastavitve > Uvozi-Izvozi > DXF > Omogoči prenose
ali pa jih ročno prejmite, kot je to razloženo na
https://github.com/yorikvanhavre/Draft-dxf-importer.
@@ -4811,7 +4878,7 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da.
No active Draft Toolbar.
- Ni dejavne orodne vrstice Osnutka.
+ Ni dejavne izrisovalne (Draft) orodne vrstice.
@@ -5011,12 +5078,12 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da.
(ON)
- (ON)
+ (Vključeno)
(OFF)
- (OFF)
+ (Izključeno)
@@ -5025,8 +5092,8 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da.
- Bezier curve has been closed
- Bezierjeva krivulja je bila sklenjena
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5048,6 +5115,11 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da.
Click and drag to define next knot
Za določitev novega vozla kliknite in povlecite
+
+
+ Bezier curve has been closed
+ Bezierjeva krivulja je bila sklenjena
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5121,12 +5193,12 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da.
Convert to Draft
- Pretvori v osnutek
+ Pretvori v izris
Convert Draft/Sketch
- Pretvori osnutek/očrt
+ Pretvori izris/očrt
@@ -5156,7 +5228,7 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da.
Select a Draft object to edit
- Za urejanje izberite predmet osnutka
+ Za urejanje izberite izrisni predmet
@@ -5206,7 +5278,7 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da.
Unable to trim these objects, only Draft wires and arcs are supported.
- Teh predmetov ni mogoče prirezati, le črtovja osnutka in loki imajo to možnost.
+ Teh predmetov ni mogoče prirezati, le izrisna črtovja in loki imajo to možnost.
@@ -5388,6 +5460,11 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da.
Group name
Ime skupine
+
+
+ Group
+ Skupina
+
Select an object to offset
@@ -5549,6 +5626,14 @@ Končni kót bo seštevek izhodiščnega in tega kóta.
uspešno izvoženo
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Skupina
+
+
Draft_Snap
@@ -5559,7 +5644,7 @@ Končni kót bo seštevek izhodiščnega in tega kóta.
Toggle Draft Grid
- Preklopi mrežo osnutka
+ Preklopi izrisovalno mrežo
@@ -5634,7 +5719,7 @@ Končni kót bo seštevek izhodiščnega in tega kóta.
Add new...
- Dodaj nov ...
+ Dodaj nov ...
@@ -6505,7 +6590,7 @@ risanjem spremenite s tipkama [ in ]
Save current style as a preset...
- Shrani trenutni slog kot prednastavitev ...
+ Shrani trenutni slog kot prednastavitev ...
@@ -6798,7 +6883,7 @@ risanjem spremenite s tipkama [ in ]
General Draft Settings
- Splošne nastavitve osnutkov
+ Splošne nastavitve izrisa
@@ -6860,7 +6945,7 @@ Vrednosti z odstopanjem, manjšim od te vrednosti bodo obravnavane kot enake. Ta
Draft tools options
- Možnosti snovalnih orodij
+ Možnosti izrisnih (Draft) orodij
@@ -6877,7 +6962,7 @@ To omogoča, da nakažete smer in vtipkate dolžino.
If this option is set, when creating Draft objects on top of an existing face of another object, the "Support" property of the Draft object will be set to the base object. This was the standard behaviour before FreeCAD 0.19
- Če je nastavljena ta možnost, bo pri ustvarjanju očrtov na ploskev drugega predmeta lastnost "Podpora" očrta nastavljena na osnovni predmet. Takšno obnašanje je bilo običajno pred FreeCADom 0.19
+ Če je nastavljena ta možnost, bo pri ustvarjanju izrisovalnih predmetov na obstoječo ploskev drugega predmeta lastnost "Podpora" izrisnega predmeta nastavljena na osnovni predmet. Takšno obnašanje je bilo običajno pred FreeCADom 0.19
@@ -6924,13 +7009,13 @@ v nasprotnem primeru se bodo ukazi zagnali v načinu brez kopiranja
Force Draft Tools to create Part primitives instead of Draft objects.
Note that this is not fully supported, and many object will be not editable with Draft Modifiers.
- Prisili Snovalna orodja, da namesto osnutkovih predmetov ustvarijo Osnovnike.
-Vedite, da ta možnost ni popolnoma podprta in da številnih predmetov ne bo mogoče urejati s Preoblikovalniki osnutkov.
+ Prisili izrisovalna orodja, da namesto izrisnih (Draft) predmetov ustvarijo delove (Part) osnovnike.
+Vedite, da ta možnost ni popolnoma podprta in da številnih predmetov ne bo mogoče urejati s Preoblikovalniki izrisa.
Use Part Primitives when available
- Uporabi osnovne oblike delov, ko so na voljo
+ Uporabi delove osnovnike, ko so na voljo
@@ -6985,7 +7070,7 @@ Vedite, da ta možnost ni popolnoma podprta in da številnih predmetov ne bo mog
Draft classic style
- Klasični slog osnutkov
+ Običajni slog izrisa (Draft)
@@ -7145,9 +7230,9 @@ Vedite, da ta možnost ni popolnoma podprta in da številnih predmetov ne bo mog
It can be a font name such as "Arial", a default style such as "sans", "serif"
or "mono", or a family such as "Arial,Helvetica,sans" or a name with a style
such as "Arial:Bold"
- To je privzeto ime pisave vseh besedil in mer osnutka.
+ To je privzeto ime pisave vseh izrisovih (Draft) besedil in mer.
Lahko je ime pisave (npr. "Arial"), privzeti slog (npr. "sans", "serif" ali "s
-stalno širno"), družina (npr. "Arial,Helvetica,sans") ali ime s slogom (npr.
+stalno širino"), družina (npr. "Arial,Helvetica,sans") ali ime s slogom (npr.
"Arial:krepko")
@@ -7615,7 +7700,7 @@ Vedite, da to lahko traja dlje časa!
Objects from the same layers will be joined into Draft Blocks,
turning the display faster, but making them less easily editable
- Predmeti istih plasti bodo združeni v osnutkovne zbire,
+ Predmeti istih plasti bodo združeni v izrisove (draft) zbire,
kar bo pohitrilo prikaz, vendar jih bo težje urejati
@@ -7628,7 +7713,7 @@ kar bo pohitrilo prikaz, vendar jih bo težje urejati
Imported texts will get the standard Draft Text size,
instead of the size they have in the DXF document
Uvožena besedila bodo namesto velikosti, ki jo imajo v
-dokumentu DXF, prevzela privzeto velikost besedila v osnutkih
+dokumentu DXF, prevzela privzeto velikost izrisovega (Draft) besedila
@@ -7638,7 +7723,7 @@ dokumentu DXF, prevzela privzeto velikost besedila v osnutkih
If this is checked, DXF layers will be imported as Draft Layers
- Če je to označeno, bodo plasti iz DXF-ja uvožene kot Plasti osnutka
+ Če je to označeno, bodo plasti iz DXF-ja uvožene kot izrisove (Draft) plasti
@@ -7806,12 +7891,12 @@ To lahko spodleti pri predlogah novejših od DXF R12.
Show Draft Snap toolbar
- Prikaži orodno vrstico za pripenjanje
+ Prikaži izrisovo (Draft) orodno vrstico za pripenjanje
Hide Draft snap toolbar after use
- Skrij orodno vrstico za pripenjanje po uporabi
+ Po uporabi skrij izrisovo (Draft) orodno vrstico za pripenjanje
@@ -7831,7 +7916,7 @@ To lahko spodleti pri predlogah novejših od DXF R12.
If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command
- Če je označeno, bo mreža vedno prikazana, ko je dejavno delovno okolje za osnutke. V nasprotnem primeru bo prikazana samo ob uporabi ukaza
+ Če je označeno, bo mreža vedno prikazana, ko je dejavno izrisovalno (Draft) delovno okolje. V nasprotnem primeru bo vidna le pri uporabi ukaza
@@ -7924,7 +8009,7 @@ To lahko spodleti pri predlogah novejših od DXF R12.
Draft Edit preferences
- Prednastavitve urejanja osnutka
+ Prednastavitve izrisnega (Draft) urejanja
@@ -7939,12 +8024,12 @@ To lahko spodleti pri predlogah novejših od DXF R12.
<html><head/><body><p>Sets the maximum number of objects Draft Edit</p><p>can process at the same time</p></body></html>
- <html><head/><body><p>Nastavi največje število predmetov, ki jih lahko urejevalnik osnutkov</p><p>obdeluje istočasno</p></body></html>
+ <html><head/><body><p>Nastavi največje število predmetov, ki jih lahko izrisni (Draft) urejevalnik </p><p>obdeluje istočasno</p></body></html>
Draft edit pick radius
- Polmer izbiranja pri urejanju osnutka
+ Polmer izbiranja pri urejanju izrisa
@@ -8194,7 +8279,7 @@ To lahko spodleti pri predlogah novejših od DXF R12.
Draft Statusbar
- Vrstica stanja osnutka
+ Izrisova (Draft) vrstica stanja
@@ -8204,12 +8289,12 @@ To lahko spodleti pri predlogah novejših od DXF R12.
Draft snap widget
- Gradnik pripenjanja osnutka
+ Irisov (Draft) gradnik pripenjanja
Enable draft statusbar annotation scale widget
- Omogoči gradnik velikosti opisov v osnutkovi vrstici stanja
+ Omogoči gradnik merila opisov v izrisovi (Draft) vrstici stanja
diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm b/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm
index b606fa7475..74d4e1137e 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm and b/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts
index 001660d795..68b460f404 100644
--- a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts
@@ -128,7 +128,7 @@ Lämna denna egenskap tom för att kunna ställa in 'Axis' och 'Center' manuellt
A parameter that determines how many symmetry planes the circular array will have.
- A parameter that determines how many symmetry planes the circular array will have.
+ En parameter som avgör hur många symmetri-planer som den cirkulära matrisen kommer att ha.
@@ -200,7 +200,7 @@ Denna egenskap är skrivskyddad, eftersom antalet beror på parametrarna i matri
The base object that will be duplicated.
- The base object that will be duplicated.
+ Bas-objektet som kommer att fördubblas.
@@ -719,11 +719,6 @@ Denna egenskap är skrivskyddad, eftersom antalet beror på de punkter som ryms
Area of this object
Arean för detta objekt
-
-
- The shape of this object
- Formen på detta objekt
-
The base object used by this object
@@ -734,6 +729,11 @@ Denna egenskap är skrivskyddad, eftersom antalet beror på de punkter som ryms
The PAT file used by this object
The PAT file used by this object
+
+
+ The shape of this object
+ Formen på detta objekt
+
The pattern name used by this object
@@ -1142,6 +1142,16 @@ beyond the dimension line
Line color
Linjefärg
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1708,11 +1718,23 @@ Matrisen kan förvandlas till en polär eller en cirkulär matris genom att änd
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Bezier-kurva
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1723,11 +1745,21 @@ CTRL för att snäppa, SKIFT för att begränsa.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Bezierverktyg
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1784,11 +1816,25 @@ Den resulterande klonen kan skalas i var och en av dess tre riktningar.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Kubisk bezierkurva
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2136,6 +2182,24 @@ Det kan också skapa en offsetkopia av det ursprungliga objektet.
CTRL för att snäppa, SKIFT för att begränsa. Håll ALT och klicka för att skapa en kopia med varje klick.
+
+ Draft_OrthoArray
+
+
+ Array
+ Fält
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Skapar kopior av det markerade objektet, och placerar kopiorna i ett ortogonellt mönster, vilket innebär att kopiorna följer den specificerade riktningen i X, Y och Z axlarna.
+
+Matrisen kan förvandlas till en polär eller en cirkulär matris genom att ändra dess typ.
+
+
Draft_PathArray
@@ -2847,14 +2911,6 @@ När objektet har skapats dubbelklicka på det i trädvyn för att återställa
Då kan du använda den för att spara ett annat kameraläge och objekts tillstånd när du behöver.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Grupp
-
-
ImportAirfoilDAT
@@ -2923,6 +2979,11 @@ Då kan du använda den för att spara ett annat kameraläge och objekts tillst
Arc tools
Cirkelbågverktyg
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3071,16 +3132,16 @@ Då kan du använda den för att spara ett annat kameraläge och objekts tillst
Auto
Automatisk
-
-
- active command:
- Aktivt kommando:
-
None
Inget
+
+
+ active command:
+ Aktivt kommando:
+
Active Draft command
@@ -4175,6 +4236,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Merging layer:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -5022,8 +5088,8 @@ För att tillåta FreeCAD att ladda ned dessa bibliotek, svara Ja.
- Bezier curve has been closed
- Bezierkurvan har stängts
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5045,6 +5111,11 @@ För att tillåta FreeCAD att ladda ned dessa bibliotek, svara Ja.
Click and drag to define next knot
Klicka och dra för att definiera nästa knut
+
+
+ Bezier curve has been closed
+ Bezierkurvan har stängts
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5385,6 +5456,11 @@ För att tillåta FreeCAD att ladda ned dessa bibliotek, svara Ja.
Group name
Gruppnamn
+
+
+ Group
+ Grupp
+
Select an object to offset
@@ -5546,6 +5622,14 @@ Den slutliga vinkeln kommer att vara basvinkeln plus denna mängd.
successfully exported
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Grupp
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_tr.qm b/src/Mod/Draft/Resources/translations/Draft_tr.qm
index e17654f422..2ebe57d6d6 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_tr.qm and b/src/Mod/Draft/Resources/translations/Draft_tr.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_tr.ts b/src/Mod/Draft/Resources/translations/Draft_tr.ts
index 7446e661b7..0622c404c7 100644
--- a/src/Mod/Draft/Resources/translations/Draft_tr.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_tr.ts
@@ -717,11 +717,6 @@ Bu özellik salt okunurdur, çünkü sayı 'Nokta Nesnesi'nde bulunan noktalara
Area of this object
Bu nesnenin alanı
-
-
- The shape of this object
- Bu nesnenin şekli
-
The base object used by this object
@@ -732,6 +727,11 @@ Bu özellik salt okunurdur, çünkü sayı 'Nokta Nesnesi'nde bulunan noktalara
The PAT file used by this object
Bu nesnenin kullandığı PAT dosyası
+
+
+ The shape of this object
+ Bu nesnenin şekli
+
The pattern name used by this object
@@ -1142,6 +1142,16 @@ dışındaki mesafesi
Line color
Çizgi rengi
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1711,11 +1721,23 @@ Dizi, türü değiştirilerek kutupsal veya dairesel bir diziye dönüştürüle
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Bezier eğri
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1726,11 +1748,21 @@ Nokta yakalamak için CTRL, sınırlamak için SHIFT.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Bezier araçları
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1788,11 +1820,25 @@ Ortaya çıkan klon, üç yönünün her birinde ölçeklenebilir.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Kübik bezier eğrisi
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2142,6 +2188,25 @@ Orijinal nesnenin bir ofset kopyasını da oluşturabilir.
Yakalamak için CTRL, sınırlamak için SHIFT. Her tıklamayla bir kopya oluşturmak için ALT tuşunu basılı tutun ve tıklayın.
+
+ Draft_OrthoArray
+
+
+ Array
+ Dizi
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Seçilen nesnenin kopyalarını oluşturur ve kopyaları ortogonal bir modele yerleştirir,
+kopyaların X, Y, Z eksenlerinde belirtilen yönü takip ettiği anlamına gelir.
+
+Dizi, türü değiştirilerek kutupsal veya dairesel bir diziye dönüştürülebilir.
+
+
Draft_PathArray
@@ -2854,14 +2919,6 @@ Nesne oluşturulduktan sonra, kamera konumunu ve nesnelerin görünürlüğünü
Ardından, ihtiyacınız olan her an farklı bir kamera konumunu ve nesnelerin durumlarını kaydetmek için kullanabilirsiniz.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Grup
-
-
ImportAirfoilDAT
@@ -2930,6 +2987,11 @@ Ardından, ihtiyacınız olan her an farklı bir kamera konumunu ve nesnelerin d
Arc tools
Yay Araçları
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3078,16 +3140,16 @@ Ardından, ihtiyacınız olan her an farklı bir kamera konumunu ve nesnelerin d
Auto
Otomatik
-
-
- active command:
- Etkin söz dizisi:
-
None
Hiçbiri
+
+
+ active command:
+ Etkin söz dizisi:
+
Active Draft command
@@ -4182,6 +4244,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Merging layer:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -5028,8 +5095,8 @@ Bu kütüphaneleri indirmek için FreeCAD'i etkinleştirmek için Evet cevabın
- Bezier curve has been closed
- Bezier eğrisi kapatıldı
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5051,6 +5118,11 @@ Bu kütüphaneleri indirmek için FreeCAD'i etkinleştirmek için Evet cevabın
Click and drag to define next knot
Sonraki düğümü tanımlamak için tıklayın ve sürükleyin
+
+
+ Bezier curve has been closed
+ Bezier eğrisi kapatıldı
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5391,6 +5463,11 @@ Bu kütüphaneleri indirmek için FreeCAD'i etkinleştirmek için Evet cevabın
Group name
Grup adı
+
+
+ Group
+ Grup
+
Select an object to offset
@@ -5552,6 +5629,14 @@ Son açı, taban açısı artı bu miktar olacaktır.
başarıyla dışa aktarıldı
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Grup
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.qm b/src/Mod/Draft/Resources/translations/Draft_uk.qm
index 77178c10dd..b08e275dbb 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_uk.qm and b/src/Mod/Draft/Resources/translations/Draft_uk.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.ts b/src/Mod/Draft/Resources/translations/Draft_uk.ts
index 05d63c7995..c86adb6503 100644
--- a/src/Mod/Draft/Resources/translations/Draft_uk.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_uk.ts
@@ -718,11 +718,6 @@ This property is read-only, as the number depends on the points contained within
Area of this object
Площа цього об'єкту
-
-
- The shape of this object
- Форма цього об'єкта
-
The base object used by this object
@@ -733,6 +728,11 @@ This property is read-only, as the number depends on the points contained within
The PAT file used by this object
Файл PAT, який використовується цим об’єктом
+
+
+ The shape of this object
+ Форма цього об'єкта
+
The pattern name used by this object
@@ -1143,6 +1143,16 @@ beyond the dimension line
Line color
Колір лінії
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1582,7 +1592,7 @@ Create a group first to use this tool.
Manage or create annotation styles
- Manage or create annotation styles
+ Керування або створення стилів анотацій
@@ -1631,14 +1641,14 @@ CTRL для прив'язки, SHIFT для обмеження.
Arc by 3 points
- Arc by 3 points
+ Дуга за 3 точками
Creates a circular arc by picking 3 points.
CTRL to snap, SHIFT to constrain.
- Creates a circular arc by picking 3 points.
-CTRL to snap, SHIFT to constrain.
+ Створює кругову дугу шляхом підбирання 3 точок.
+CTRL для прив'язки, SHIFT для врегулювання.
@@ -1712,11 +1722,23 @@ The array can be turned into a polar or a circular array by changing its type.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Крива Без'є
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1727,11 +1749,21 @@ CTRL для прив'язки, SHIFT для обмеження.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Інструменти для побудови кривої Безьє
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1789,11 +1821,25 @@ The resulting clone can be scaled in each of its three directions.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Кубічна крива Безьє
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2143,6 +2189,25 @@ CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each
CTRL для створення знімків, SHIFT для обмеження. Утримуйте ALT та натисніть га об'єкт, щоб створити нову копію з кожним кліком.
+
+ Draft_OrthoArray
+
+
+ Array
+ Масив
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Створює копії обраного об'єкту та розміщує копії за ортогональною схемою,
+значення копій йдуть у вказаному напрямку в осі X, Y, Z.
+
+Масив може бути перетворений на полярний або круговий масив шляхом зміни його типу.
+
+
Draft_PathArray
@@ -2853,14 +2918,6 @@ Then you can use it to save a different camera position and objects' states any
Потім ви можете використовувати його, щоб зберегти іншу позицію камери і об'єкти в будь-який час, коли вам це потрібно.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Група
-
-
ImportAirfoilDAT
@@ -2929,6 +2986,11 @@ Then you can use it to save a different camera position and objects' states any
Arc tools
Інструменти дуги
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3077,16 +3139,16 @@ Then you can use it to save a different camera position and objects' states any
Auto
Автоматично
-
-
- active command:
- активна команда:
-
None
Немає
+
+
+ active command:
+ активна команда:
+
Active Draft command
@@ -4181,6 +4243,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Об'єднання шару:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -4194,7 +4261,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Unable to convert input into a scale factor
- Unable to convert input into a scale factor
+ Неможливо перетворити вхідні дані в коефіцієнт масштабування
@@ -4204,7 +4271,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Set custom scale
- Set custom scale
+ Встановити довільний масштаб
@@ -4214,7 +4281,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Set the scale used by draft annotation tools
- Set the scale used by draft annotation tools
+ Встановіть масштаб, який використовується в проекті анотації
@@ -4304,77 +4371,77 @@ Not available if Draft preference option 'Use Part Primitives' is enabled
Snap Lock
- Snap Lock
+ Прив'язування встановити
Snap Endpoint
- Snap Endpoint
+ Прив'язка кінцевої точки
Snap Midpoint
- Snap Midpoint
+ Прив'язка середньої точки
Snap Center
- Snap Center
+ Прив'язка центру
Snap Angle
- Snap Angle
+ Кут прив'язки:
Snap Intersection
- Snap Intersection
+ Перетин прив'язки
Snap Perpendicular
- Snap Perpendicular
+ Прив'язка перпендикулярна
Snap Extension
- Snap Extension
+ Розширення прив'язки
Snap Parallel
- Snap Parallel
+ Паралельна прив’язка
Snap Special
- Snap Special
+ Особливі прив'язки
Snap Near
- Snap Near
+ Прив'язка поруч
Snap Ortho
- Snap Ortho
+ Притягування перпендикулярних
Snap Grid
- Snap Grid
+ Прив'язка до сітки
Snap WorkingPlane
- Snap WorkingPlane
+ Прив'язувати робочу площину
Snap Dimensions
- Snap Dimensions
+ Прив'язка розмірів
@@ -4628,7 +4695,7 @@ https://github. om/yorikvanhavre/Draft-dxf-імпортер
Select an object to upgrade
- Select an object to upgrade
+ Оберіть об'єкт для покращення
@@ -4638,57 +4705,57 @@ https://github. om/yorikvanhavre/Draft-dxf-імпортер
Select an object to clone
- Select an object to clone
+ Оберіть об'єкт для клонування
Pick first point
- Pick first point
+ Вкажіть першу точку
Create Ellipse
- Create Ellipse
+ Створити еліпс
Pick opposite point
- Pick opposite point
+ Вкажіть протилежну точку
Create Line
- Create Line
+ Створити лінію
Create Wire
- Create Wire
+ Створити каркас
Pick next point
- Pick next point
+ Вкажіть наступну точку
Unable to create a Wire from selected objects
- Unable to create a Wire from selected objects
+ Не вдалося створити Сітку із вибраних об'єктів
Convert to Wire
- Convert to Wire
+ Конвертувати в Сітку
This object does not support possible coincident points, please try again.
- This object does not support possible coincident points, please try again.
+ Цей об'єкт не підтримує можливі випадкові точки, будь ласка, спробуйте ще раз.
Active object must have more than two points/nodes
- Active object must have more than two points/nodes
+ Активний об'єкт повинен мати більше двох точок/вузлів
@@ -4993,67 +5060,72 @@ https://github. om/yorikvanhavre/Draft-dxf-імпортер
Unable to scale object:
- Unable to scale object:
+ Неможливо масштабувати об'єкт:
Unable to scale objects:
- Unable to scale objects:
+ Неможливо масштабувати об'єкт:
This object type cannot be scaled directly. Please use the clone method.
- This object type cannot be scaled directly. Please use the clone method.
+ Цей тип об'єкта не можна масштабувати безпосередньо. Будь ласка, використовуйте метод клонування.
Pick new distance from base point
- Pick new distance from base point
+ Вкажіть нову відстань від базовоої точки
(ON)
- (ON)
+ Вкл
(OFF)
- (OFF)
+ Викл
Create 2D view
- Create 2D view
+ Створити 2D вигляд
- Bezier curve has been closed
- Bezier curve has been closed
+ Bézier curve has been closed
+ Bézier curve has been closed
Last point has been removed
- Last point has been removed
+ Останню точку було видалено
Pick next point, or finish (A) or close (O)
- Pick next point, or finish (A) or close (O)
+ Виберіть наступну точку або завершити (А) або закрити (O)
Create BezCurve
- Create BezCurve
+ Створити криву Безьє
Click and drag to define next knot
- Click and drag to define next knot
+ Клацніть та перетягніть, щоб визначити наступне вузол
+
+
+
+ Bezier curve has been closed
+ Крива Безьє була закрита
Click and drag to define next knot, or finish (A) or close (O)
- Click and drag to define next knot, or finish (A) or close (O)
+ Клік та перетягніть, щоб визначити наступне кно, або завершити (А) або закрити (O)
@@ -5063,32 +5135,32 @@ https://github. om/yorikvanhavre/Draft-dxf-імпортер
Select an object to stretch
- Select an object to stretch
+ Оберіть об'єкт для розтягування
Pick first point of selection rectangle
- Pick first point of selection rectangle
+ Вкажіть першу точку прямокутника вибору
Pick opposite point of selection rectangle
- Pick opposite point of selection rectangle
+ Вкажіть протилежну точку прямокутника вибору
Pick start point of displacement
- Pick start point of displacement
+ Вкажіть початкову точку зміщення
Pick end point of displacement
- Pick end point of displacement
+ Вкажіть кінцеву точку зміщення
Turning one Rectangle into a Wire
- Turning one Rectangle into a Wire
+ Перетворення одного Прямокутника в Сітку
@@ -5103,32 +5175,32 @@ https://github. om/yorikvanhavre/Draft-dxf-імпортер
Create Plane
- Create Plane
+ Створити площину
Create Rectangle
- Create Rectangle
+ Створити прямокутник
Select an object to convert.
- Select an object to convert.
+ Оберіть об'єкт для перетворення.
Convert to Sketch
- Convert to Sketch
+ Перетворити на ескіз
Convert to Draft
- Convert to Draft
+ Перетворити на чернетки
Convert Draft/Sketch
- Convert Draft/Sketch
+ Перетворення Чернетки/ескіз
@@ -5138,47 +5210,47 @@ https://github. om/yorikvanhavre/Draft-dxf-імпортер
Pick target point
- Pick target point
+ Вкажіть цільову точку
Create Label
- Create Label
+ Створити мітку
Pick endpoint of leader line
- Pick endpoint of leader line
+ Вкажіть кінцеву точку виносної лінії
Pick text position
- Pick text position
+ Вказати положення тексту
Select a Draft object to edit
- Select a Draft object to edit
+ Оберіть креслення для редагування
No edit point found for selected object
- No edit point found for selected object
+ Не знайдено точки редагування для вибраного об'єкту
Too many objects selected, max number set to:
- Too many objects selected, max number set to:
+ Забагато об'єктів обрано. Максимальне число встановлено на:
: this object is not editable
- : this object is not editable
+ : цей об'єкт не редагується
Please select exactly two objects, the base object and the path object, before calling this command.
- Please select exactly two objects, the base object and the path object, before calling this command.
+ Будь ласка, виберіть саме два об’єкти, основний об'єкт і шлях до запуску цієї команди.
@@ -5193,12 +5265,12 @@ https://github. om/yorikvanhavre/Draft-dxf-імпортер
Select objects to trim or extend
- Select objects to trim or extend
+ Оберіть об'єкти, щоб обрізати або розширити
Pick distance
- Pick distance
+ Вибрати відстань
@@ -5208,17 +5280,18 @@ https://github. om/yorikvanhavre/Draft-dxf-імпортер
Unable to trim these objects, only Draft wires and arcs are supported.
- Unable to trim these objects, only Draft wires and arcs are supported.
+ Підрізати можливо лише каркаси креслення та дуги.
+
Unable to trim these objects, too many wires
- Unable to trim these objects, too many wires
+ Неможливо обрізати ці об'єкти, занадто багато ліній
These objects don't intersect.
- These objects don't intersect.
+ Ці об'єкти не перетинаються.
@@ -5390,6 +5463,11 @@ https://github. om/yorikvanhavre/Draft-dxf-імпортер
Group name
Назва групи
+
+
+ Group
+ Група
+
Select an object to offset
@@ -5458,7 +5536,7 @@ https://github. om/yorikvanhavre/Draft-dxf-імпортер
Arc by 3 points
- Arc by 3 points
+ Дуга за 3 точками
@@ -5551,6 +5629,14 @@ The final angle will be the base angle plus this amount.
successfully exported
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Група
+
+
Draft_Snap
@@ -6426,7 +6512,7 @@ will be moved to the center of the view
The spacing between the smaller grid lines
- The spacing between the smaller grid lines
+ Відступ між меншими лініями сітки
@@ -6437,7 +6523,7 @@ will be moved to the center of the view
The number of squares between each main line of the grid
- The number of squares between each main line of the grid
+ Кількість квадратів між кожним основним рядком таблиці
@@ -6450,19 +6536,19 @@ will be moved to the center of the view
The distance at which a point can be snapped to
when approaching the mouse. You can also change this
value by using the [ and ] keys while drawing
- The distance at which a point can be snapped to
-when approaching the mouse. You can also change this
-value by using the [ and ] keys while drawing
+ Відстань до якої можна притягування точки
+при наближенні до миші. Ви також можете змінити це
+значення, використовуючи ключі [ і ], під час креслення
Snapping radius
- Snapping radius
+ Радіус прив'язування
Grid extension
- Grid extension
+ Розширення сітки
@@ -6472,52 +6558,52 @@ value by using the [ and ] keys while drawing
Centers the view on the current working plane
- Centers the view on the current working plane
+ Центри вигляду на поточній робочій площині
Center view
- Center view
+ Центрування вигляду
Resets the working plane to its previous position
- Resets the working plane to its previous position
+ Скидає робочу площину до попередньої позиції
Previous
- Previous
+ Попередня
Style settings
- Style settings
+ Параметри стилю
Fills the values below with a stored style preset
- Fills the values below with a stored style preset
+ Заповнює значення нижче за допомогою збереженого набору стилів
Load preset
- Load preset
+ Завантажити налаштування
Save current style as a preset...
- Save current style as a preset...
+ Зберегти поточний стиль як налаштування...
Lines and faces
- Lines and faces
+ Лінії та грані
The color of faces
- The color of faces
+ Колір поверхонь
@@ -6537,12 +6623,12 @@ value by using the [ and ] keys while drawing
The color of lines
- The color of lines
+ Колір ліній
The line style
- The line style
+ Стиль лінії
@@ -6577,12 +6663,12 @@ value by using the [ and ] keys while drawing
The display mode for faces
- The display mode for faces
+ Режим відображення граней
Flat Lines
- Flat Lines
+ Прямі лінії
@@ -6602,7 +6688,7 @@ value by using the [ and ] keys while drawing
Shape color
- Shape color
+ Колір форми
@@ -6612,7 +6698,7 @@ value by using the [ and ] keys while drawing
The transparency of faces
- The transparency of faces
+ Прозорість поверхонь
@@ -6627,7 +6713,7 @@ value by using the [ and ] keys while drawing
The type of dimension arrows
- The type of dimension arrows
+ Тип розмірних стрілок
@@ -6657,7 +6743,7 @@ value by using the [ and ] keys while drawing
Text font
- Text font
+ Шрифт тексту:
@@ -6672,32 +6758,32 @@ value by using the [ and ] keys while drawing
Text size
- Text size
+ Розмір тексту
The color of texts and dimension texts
- The color of texts and dimension texts
+ Колір текстів і розмірних текстів
The size of texts and dimension texts
- The size of texts and dimension texts
+ Розмір текстів і розмірних текстів
Arrow style
- Arrow style
+ Стиль стрілки
If the unit suffix is shown on dimension texts or not
- If the unit suffix is shown on dimension texts or not
+ Якщо величина суфіксу одиниці відображається на розмірних текстах чи ні
The size of dimension arrows
- The size of dimension arrows
+ Розмір розмірних стрілок
@@ -6717,7 +6803,7 @@ value by using the [ and ] keys while drawing
The unit to use for dimensions. Leave blank to use current FreeCAD unit
- The unit to use for dimensions. Leave blank to use current FreeCAD unit
+ Одиниця виміру використана для розмірності. Залиште порожнім, щоб використовувати поточну одиницю FreeCAD
@@ -6742,7 +6828,7 @@ value by using the [ and ] keys while drawing
Apply above style to selected object(s)
- Apply above style to selected object(s)
+ Застосувати вище стиль для вибраного об'єкту(ів)
@@ -6752,7 +6838,7 @@ value by using the [ and ] keys while drawing
Texts/dims
- Texts/dims
+ Тексти / розмірність
@@ -6835,7 +6921,7 @@ value by using the [ and ] keys while drawing
The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users.
- The number of decimals in internal coordinates operations (for ex. 3 = 0.001). Values between 6 and 8 are usually considered the best trade-off among FreeCAD users.
+ Кількість десяткових знаків у внутрішніх координатах (для прик. 3 = 0.001). Значення від 6 до 8 зазвичай вважаються найкращими компромісами серед користувачів FreeCAD.
@@ -6846,30 +6932,30 @@ value by using the [ and ] keys while drawing
This is the value used by functions that use a tolerance.
Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both.
- This is the value used by functions that use a tolerance.
-Values with differences below this value will be treated as same. This value will be obsoleted soon so the precision level above controls both.
+ Дана функція - це значення, що використовується для обробки цього значення.
+Значення з різницею нижче цього значення будуть розглядатися як те саме. Це значення буде застаріло скоро такий рівень точності вище контролює обидва варіанти.
If this option is checked, the layers drop-down list will also show groups, allowing you to automatically add objects to groups too.
- If this option is checked, the layers drop-down list will also show groups, allowing you to automatically add objects to groups too.
+ Якщо позначено цей пункт, випадаючий список шарів також буде показувати групи, дозволяючи автоматично додавати об'єкти до груп теж.
Show groups in layers list drop-down button
- Show groups in layers list drop-down button
+ Показувати групи в випадаючому списку
Draft tools options
- Draft tools options
+ Налаштування інструментів креслення
When drawing lines, set focus on Length instead of X coordinate.
This allows to point the direction and type the distance.
- When drawing lines, set focus on Length instead of X coordinate.
-This allows to point the direction and type the distance.
+ Під час малювання лінії встановіть фокус на довжині замість координат Х.
+Це дозволяє наводити напрям і набирати відстань.
diff --git a/src/Mod/Draft/Resources/translations/Draft_val-ES.qm b/src/Mod/Draft/Resources/translations/Draft_val-ES.qm
index 84b477db32..4a35f04831 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_val-ES.qm and b/src/Mod/Draft/Resources/translations/Draft_val-ES.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_val-ES.ts b/src/Mod/Draft/Resources/translations/Draft_val-ES.ts
index da839f594c..0eb3b02b20 100644
--- a/src/Mod/Draft/Resources/translations/Draft_val-ES.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_val-ES.ts
@@ -721,11 +721,6 @@ This property is read-only, as the number depends on the points contained within
Area of this object
Area of this object
-
-
- The shape of this object
- La forma d'aquest objecte
-
The base object used by this object
@@ -736,6 +731,11 @@ This property is read-only, as the number depends on the points contained within
The PAT file used by this object
The PAT file used by this object
+
+
+ The shape of this object
+ La forma d'aquest objecte
+
The pattern name used by this object
@@ -1145,6 +1145,16 @@ més enllà de la línea de cota
Line color
Color de línia
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1714,11 +1724,23 @@ The array can be turned into a polar or a circular array by changing its type.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Bezier curve
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1729,11 +1751,21 @@ CTRL to snap, SHIFT to constrain.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Bezier tools
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1791,11 +1823,25 @@ The resulting clone can be scaled in each of its three directions.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Cubic bezier curve
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2145,6 +2191,25 @@ It can also create an offset copy of the original object.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.
+
+ Draft_OrthoArray
+
+
+ Array
+ Matriu
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+
+
Draft_PathArray
@@ -2859,14 +2924,6 @@ Once the object is created double click it in the tree view to restore the camer
Then you can use it to save a different camera position and objects' states any time you need.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Grup
-
-
ImportAirfoilDAT
@@ -2935,6 +2992,11 @@ Then you can use it to save a different camera position and objects' states any
Arc tools
Arc tools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3083,16 +3145,16 @@ Then you can use it to save a different camera position and objects' states any
Auto
Auto
-
-
- active command:
- ordre activa:
-
None
Cap
+
+
+ active command:
+ ordre activa:
+
Active Draft command
@@ -4187,6 +4249,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Merging layer:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -5032,8 +5099,8 @@ Per a permetre que FreeCAD descarregue aquestes llibreries responeu Sí.
- Bezier curve has been closed
- Bezier curve has been closed
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5055,6 +5122,11 @@ Per a permetre que FreeCAD descarregue aquestes llibreries responeu Sí.Click and drag to define next knot
Click and drag to define next knot
+
+
+ Bezier curve has been closed
+ Bezier curve has been closed
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5395,6 +5467,11 @@ Per a permetre que FreeCAD descarregue aquestes llibreries responeu Sí.Group name
Group name
+
+
+ Group
+ Grup
+
Select an object to offset
@@ -5556,6 +5633,14 @@ The final angle will be the base angle plus this amount.
successfully exported
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Grup
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_vi.qm b/src/Mod/Draft/Resources/translations/Draft_vi.qm
index 9bd501228a..7f0144cbb1 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_vi.qm and b/src/Mod/Draft/Resources/translations/Draft_vi.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_vi.ts b/src/Mod/Draft/Resources/translations/Draft_vi.ts
index 9ba959287f..31f92a8640 100644
--- a/src/Mod/Draft/Resources/translations/Draft_vi.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_vi.ts
@@ -722,11 +722,6 @@ This property is read-only, as the number depends on the points contained within
Area of this object
Area of this object
-
-
- The shape of this object
- Hình dạng của bộ phận này
-
The base object used by this object
@@ -737,6 +732,11 @@ This property is read-only, as the number depends on the points contained within
The PAT file used by this object
Tệp PAT dùng bởi đối tượng này
+
+
+ The shape of this object
+ Hình dạng của bộ phận này
+
The pattern name used by this object
@@ -1147,6 +1147,16 @@ beyond the dimension line
Line color
Màu đường vẽ
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1586,7 +1596,7 @@ Create a group first to use this tool.
Manage or create annotation styles
- Manage or create annotation styles
+ Quản lí hoặc tạo kiểu chú thích
@@ -1641,8 +1651,8 @@ CTRL to snap, SHIFT to constrain.
Creates a circular arc by picking 3 points.
CTRL to snap, SHIFT to constrain.
- Creates a circular arc by picking 3 points.
-CTRL to snap, SHIFT to constrain.
+ Tạo một cung tròn bằng 3 điểm.
+CTRL để bắt điểm, SHIFT để tạo ràng buộc.
@@ -1716,11 +1726,23 @@ The array can be turned into a polar or a circular array by changing its type.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Bezier curve
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1731,11 +1753,21 @@ CTRL to snap, SHIFT to constrain.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Bezier tools
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1793,11 +1825,25 @@ The resulting clone can be scaled in each of its three directions.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Cubic bezier curve
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2147,6 +2193,25 @@ It can also create an offset copy of the original object.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.
+
+ Draft_OrthoArray
+
+
+ Array
+ Mảng
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+
+
Draft_PathArray
@@ -2861,14 +2926,6 @@ Once the object is created double click it in the tree view to restore the camer
Then you can use it to save a different camera position and objects' states any time you need.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- Nhóm
-
-
ImportAirfoilDAT
@@ -2937,6 +2994,11 @@ Then you can use it to save a different camera position and objects' states any
Arc tools
Arc tools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3085,16 +3147,16 @@ Then you can use it to save a different camera position and objects' states any
Auto
Tự động
-
-
- active command:
- lệnh hoạt động:
-
None
Không
+
+
+ active command:
+ lệnh hoạt động:
+
Active Draft command
@@ -4189,6 +4251,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Merging layer:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -5035,8 +5102,8 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
- Bezier curve has been closed
- Bezier curve has been closed
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5058,6 +5125,11 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
Click and drag to define next knot
Click and drag to define next knot
+
+
+ Bezier curve has been closed
+ Bezier curve has been closed
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5398,6 +5470,11 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
Group name
Group name
+
+
+ Group
+ Nhóm
+
Select an object to offset
@@ -5559,6 +5636,14 @@ The final angle will be the base angle plus this amount.
successfully exported
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ Nhóm
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm
index faa3e3e317..e3c5ddc67a 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts
index 4fe63b38ab..0b4db0d1b8 100644
--- a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts
@@ -718,11 +718,6 @@ This property is read-only, as the number depends on the points contained within
Area of this object
该物体的面积
-
-
- The shape of this object
- 此对象的形状
-
The base object used by this object
@@ -733,6 +728,11 @@ This property is read-only, as the number depends on the points contained within
The PAT file used by this object
The PAT file used by this object
+
+
+ The shape of this object
+ 此对象的形状
+
The pattern name used by this object
@@ -1143,6 +1143,16 @@ beyond the dimension line
Line color
线条颜色
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1709,11 +1719,23 @@ The array can be turned into a polar or a circular array by changing its type.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Bezier curve
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1724,11 +1746,21 @@ CTRL to snap, SHIFT to constrain.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Bezier tools
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1786,11 +1818,25 @@ The resulting clone can be scaled in each of its three directions.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Cubic bezier curve
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2138,6 +2184,25 @@ It can also create an offset copy of the original object.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.
+
+ Draft_OrthoArray
+
+
+ Array
+ 阵列
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+
+
Draft_PathArray
@@ -2852,14 +2917,6 @@ Once the object is created double click it in the tree view to restore the camer
Then you can use it to save a different camera position and objects' states any time you need.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- 组
-
-
ImportAirfoilDAT
@@ -2928,6 +2985,11 @@ Then you can use it to save a different camera position and objects' states any
Arc tools
Arc tools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3076,16 +3138,16 @@ Then you can use it to save a different camera position and objects' states any
Auto
自动
-
-
- active command:
- 当前命令:
-
None
无
+
+
+ active command:
+ 当前命令:
+
Active Draft command
@@ -4180,6 +4242,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Merging layer:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -5024,8 +5091,8 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
- Bezier curve has been closed
- Bezier curve has been closed
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5047,6 +5114,11 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
Click and drag to define next knot
Click and drag to define next knot
+
+
+ Bezier curve has been closed
+ Bezier curve has been closed
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5387,6 +5459,11 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
Group name
Group name
+
+
+ Group
+ 组
+
Select an object to offset
@@ -5548,6 +5625,14 @@ The final angle will be the base angle plus this amount.
successfully exported
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ 组
+
+
Draft_Snap
diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm b/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm
index 2c80bcbcda..1f059d76dd 100644
Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm differ
diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts
index 331e1494ef..4e71b25b37 100644
--- a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts
+++ b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts
@@ -722,11 +722,6 @@ This property is read-only, as the number depends on the points contained within
Area of this object
此物件的面積
-
-
- The shape of this object
- The shape of this object
-
The base object used by this object
@@ -737,6 +732,11 @@ This property is read-only, as the number depends on the points contained within
The PAT file used by this object
The PAT file used by this object
+
+
+ The shape of this object
+ The shape of this object
+
The pattern name used by this object
@@ -1147,6 +1147,16 @@ beyond the dimension line
Line color
線條顏色
+
+
+ Defines an SVG pattern.
+ Defines an SVG pattern.
+
+
+
+ Defines the size of the SVG pattern.
+ Defines the size of the SVG pattern.
+
The size of the text
@@ -1716,11 +1726,23 @@ The array can be turned into a polar or a circular array by changing its type.
Draft_BezCurve
+
+
+ Bézier curve
+ Bézier curve
+
Bezier curve
Bezier curve
+
+
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+ Creates an N-degree Bézier curve. The more points you pick, the higher the degree.
+CTRL to snap, SHIFT to constrain.
+
Creates an N-degree Bezier curve. The more points you pick, the higher the degree.
@@ -1731,11 +1753,21 @@ CTRL to snap, SHIFT to constrain.
Draft_BezierTools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
Bezier tools
+
+
+ Create various types of Bézier curves.
+ Create various types of Bézier curves.
+
Create various types of Bezier curves.
@@ -1793,11 +1825,25 @@ The resulting clone can be scaled in each of its three directions.
Draft_CubicBezCurve
+
+
+ Cubic Bézier curve
+ Cubic Bézier curve
+
Cubic bezier curve
Cubic bezier curve
+
+
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+ Creates a Bézier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
+After the curve is created you can go back to edit each control point and set the properties of each knot.
+CTRL to snap, SHIFT to constrain.
+
Creates a Bezier curve made of 2nd degree (quadratic) and 3rd degree (cubic) segments. Click and drag to define each segment.
@@ -2147,6 +2193,25 @@ It can also create an offset copy of the original object.
CTRL to snap, SHIFT to constrain. Hold ALT and click to create a copy with each click.
+
+ Draft_OrthoArray
+
+
+ Array
+ 矩陣
+
+
+
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+ Creates copies of the selected object, and places the copies in an orthogonal pattern,
+meaning the copies follow the specified direction in the X, Y, Z axes.
+
+The array can be turned into a polar or a circular array by changing its type.
+
+
Draft_PathArray
@@ -2861,14 +2926,6 @@ Once the object is created double click it in the tree view to restore the camer
Then you can use it to save a different camera position and objects' states any time you need.
-
- Gui::Dialog::DlgAddProperty
-
-
- Group
- 群組
-
-
ImportAirfoilDAT
@@ -2937,6 +2994,11 @@ Then you can use it to save a different camera position and objects' states any
Arc tools
Arc tools
+
+
+ Bézier tools
+ Bézier tools
+
Bezier tools
@@ -3085,16 +3147,16 @@ Then you can use it to save a different camera position and objects' states any
Auto
自動
-
-
- active command:
- 啟動指令：
-
None
無
+
+
+ active command:
+ 啟動指令：
+
Active Draft command
@@ -4189,6 +4251,11 @@ Not available if Draft preference option 'Use Part Primitives' is enabledMerging layer:
Merging layer:
+
+
+ Please load the Draft Workbench to enable editing this object
+ Please load the Draft Workbench to enable editing this object
+
Draft
@@ -5033,8 +5100,8 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
- Bezier curve has been closed
- Bezier curve has been closed
+ Bézier curve has been closed
+ Bézier curve has been closed
@@ -5056,6 +5123,11 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
Click and drag to define next knot
Click and drag to define next knot
+
+
+ Bezier curve has been closed
+ Bezier curve has been closed
+
Click and drag to define next knot, or finish (A) or close (O)
@@ -5396,6 +5468,11 @@ https://github.com/yorikvanhavre/Draft-dxf-importer
Group name
Group name
+
+
+ Group
+ 群組
+
Select an object to offset
@@ -5557,6 +5634,14 @@ The final angle will be the base angle plus this amount.
successfully exported
+
+ Gui::Dialog::DlgAddProperty
+
+
+ Group
+ 群組
+
+
Draft_Snap
diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ka.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ka.qm
index 07e81fed71..bfa9c02d09 100644
Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ka.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ka.qm differ
diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ka.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ka.ts
index f8db2b12f4..102d28233d 100644
--- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_ka.ts
+++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_ka.ts
@@ -121,7 +121,7 @@
Open &browser view
- ბრა_უზერში გახსნა
+ ბრაუზერში გახსნა
Opens the selected page in a browser view
diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sl.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sl.qm
index 3679af2d2a..0eaa2f3128 100644
Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sl.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sl.qm differ
diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sl.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sl.ts
index e0edf99c82..936319fa90 100644
--- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_sl.ts
+++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_sl.ts
@@ -39,11 +39,11 @@
&Draft View
- &Pogled osnutka
+ &Izrisni pogled
Inserts a Draft view of the selected object(s) in the active drawing
- Vstavi pogled osnutka izbranih objektov v dejavno risbo
+ Vstavi izrisni pogled izbranih predmeov v dejavno risbo
@@ -564,7 +564,7 @@ Ali želite nadaljevati?
Make axonometric...
- Izdelaj aksonometrijo ...
+ Izdelaj aksonometrijo ...
Edit axonometric settings...
diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm
index b124cd74c8..bae6c42246 100755
Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_de.qm differ
diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts
index 09cfb97730..4178ff3c44 100755
--- a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts
+++ b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts
@@ -101,12 +101,12 @@
Constant vacuum permittivity
- Constant vacuum permittivity
+ Elektrische Feldkonstante
Creates a FEM constant vacuum permittivity to overwrite standard value
- Creates a FEM constant vacuum permittivity to overwrite standard value
+ Erzeugt eine Elektrische Feldkonstante für FEM, die den Standardwert überschreibt
@@ -119,7 +119,7 @@
Creates a FEM constraint body heat source
- FEM Randbedingung für Körperwärmequelle erstellen
+ FEM-Randbedingung für Körperwärmequelle erstellen
@@ -127,12 +127,12 @@
Constraint centrif
- Constraint centrif
+ Randbedingung Zentrifugal-Belastung
Creates a FEM constraint centrif
- Creates a FEM constraint centrif
+ FEM-Randbedingungen für Zentrifugal-Belastung erstellen
@@ -145,7 +145,7 @@
Creates a FEM constraint electrostatic potential
- FEM Randbedingung für elektrostatisches Potential erstellen
+ FEM-Randbedingung für elektrostatisches Potential erstellen
@@ -171,7 +171,7 @@
Creates a FEM constraint initial flow velocity
- FEM Randbedingung für anfängliche Strömungsgeschwindigkeit festlegen
+ FEM-Randbedingung für initiale Strömungsgeschwindigkeit festlegen
@@ -179,12 +179,12 @@
Constraint sectionprint
- Constraint sectionprint
+ Randbedingung Querschnitts-Auszug
Creates a FEM constraint sectionprint
- Creates a FEM constraint sectionprint
+ FEM-Randbedingung für einen Querschnitts-Auszug erstellen
@@ -197,7 +197,7 @@
Creates a FEM constraint self weight
- FEM Randbedingung Eigengewicht erstellen
+ FEM-Randbedingung Eigengewicht erstellen
@@ -210,7 +210,7 @@
Creates a FEM constraint tie
- Erzeugt eine FEM-Zwangsverbindung
+ FEM-Zwangsverbindung erzeugen
@@ -218,12 +218,12 @@
Fluid section for 1D flow
- Fluid-Abschnitt für 1D-Fluß
+ Fluid-Abschnitt mit 1D-Strömung
Creates a FEM fluid section for 1D flow
- Creates a FEM fluid section for 1D flow
+ REM-Fluid-Abschnitt mit 1D-Strömung erzeugen
@@ -283,12 +283,12 @@
Electricforce equation
- Stromkraft-Gleichung
+ Gleichung für Elektrische Kraft
Creates a FEM equation for electric forces
- Creates a FEM equation for electric forces
+ FEM-Gleichung für elektrische Kraft erstellen
@@ -322,12 +322,12 @@
Flux equation
- Durchflussgleichung
+ Flussgleichung
Creates a FEM equation for flux
- Creates a FEM equation for flux
+ FEM-Gleichung für Fluss erstellen
@@ -335,12 +335,12 @@
Heat equation
- Wärmeleitungsgleichung
+ Wärmegleichung
Creates a FEM equation for heat
- Creates a FEM equation for heat
+ FEM-Gleichung für Wärme erstellen
@@ -387,7 +387,7 @@
Creates a FEM material for fluid
- Erzeugt ein FEM-Material für Fluid
+ FEM-Material für Fluid erzeugen
@@ -426,7 +426,7 @@
Creates a FEM material for solid
- Erzeugt ein FEM-Material für Festkörper
+ FEM-Material für Festkörper erstellen
@@ -499,7 +499,7 @@
Create a FEM mesh from a solid or face shape by Netgen internal mesher
- Create a FEM mesh from a solid or face shape by Netgen internal mesher
+ FEM-Netz aus Festkörper oder Flächenform mittels internem Netzgenerator Netgen erzeugen
@@ -551,7 +551,7 @@
Creates a FEM solver CalculiX new framework (less result error handling)
- Erzeugt FEM-Solver CalculiX neues Framework (weniger Ergebnis-Fehlerbehandlung)
+ FEM-Solver CalculiX neues Framework erstellen (weniger Ergebnis-Fehlerbehandlung)
@@ -564,7 +564,7 @@
Creates a standard FEM solver CalculiX with ccx tools
- CalculiX-Solver erstellen
+ Standard-FEM-Solver CalculiX mit ccx-Tools erstellen
@@ -701,7 +701,7 @@
Creates a standard FEM solver CalculiX with ccx tools
- CalculiX-Solver erstellen
+ Standard-FEM-Solver CalculiX mit ccx-Tools erstellen
@@ -714,12 +714,12 @@
Constraint bearing
- Constraint bearing
+ Randbedingung Wälzlager
Creates a FEM constraint for a bearing
- Creates a FEM constraint for a bearing
+ FEM-Randbedingung für Wälzlager erstellen
@@ -732,12 +732,12 @@
Constraint contact
- Kontakt der Beschränkung
+ Randbedingung Flächenkontakt
Creates a FEM constraint for contact between faces
- Creates a FEM constraint for contact between faces
+ FEM-Randbedingung für Flächenkontakt erzeugen
@@ -750,12 +750,12 @@
Constraint displacement
- Constraint displacement
+ Randbedingungen Verschiebung/Verdrehung
Creates a FEM constraint for a displacement acting on a geometric entity
- Creates a FEM constraint for a displacement acting on a geometric entity
+ FEM-Randbedingungen für Verschiebung/Verdrehung einer geometrischen Einheit erzeugen
@@ -768,12 +768,12 @@
Constraint fixed
- Beschränkung fixiert
+ Randbedingung Fixierung
Creates a FEM constraint for a fixed geometric entity
- Creates a FEM constraint for a fixed geometric entity
+ FEM-Randbedingung für Fixierung einer geometrischen Einheit erzeugen
@@ -786,12 +786,12 @@
Fluid boundary condition
- Fluid boundary condition
+ Fluid-Randbedingung
Create fluid boundary condition on face entity for Computional Fluid Dynamics
- Create fluid boundary condition on face entity for Computional Fluid Dynamics
+ Erzeuge Fluid-Randbedingung einer Fläche für Computational Fluid Dynamics
@@ -809,7 +809,7 @@
Creates a FEM constraint for a force acting on a geometric entity
- Creates a FEM constraint for a force acting on a geometric entity
+ FEM-Randbedingung für Krafteinwirkung auf eine geometrische Einheit erzeugen
@@ -822,12 +822,12 @@
Constraint gear
- Constraint gear
+ Randbedingung Zahnrad
Creates a FEM constraint for a gear
- Creates a FEM constraint for a gear
+ FEM-Randbedingung für Zahnrad erstellen
@@ -840,12 +840,12 @@
Constraint heatflux
- Constraint heatflux
+ Randbedingung Wärmestrom
Creates a FEM constraint for a heatflux acting on a face
- Creates a FEM constraint for a heatflux acting on a face
+ FEM-Randbedingung für einen Wärmestrom auf eine Fläche erzeugen
@@ -863,7 +863,7 @@
Creates a FEM constraint for initial temperature acting on a body
- Creates a FEM constraint for initial temperature acting on a body
+ FEM-Randbedingung für Starttemperatur eines Körpers erzeugen
@@ -894,12 +894,12 @@
Constraint pressure
- Constraint pressure
+ Randbedingung Druck
Creates a FEM constraint for a pressure acting on a face
- Creates a FEM constraint for a pressure acting on a face
+ FEM-Randbedingung für den Druck auf eine Fläche erzeugen
@@ -912,12 +912,12 @@
Constraint pulley
- Constraint pulley
+ Randbedingung Riemenscheibe
Creates a FEM constraint for a pulley
- Creates a FEM constraint for a pulley
+ FEM-Randbedingung für Riemenscheibe erzeugen
@@ -930,12 +930,12 @@
Constraint spring
- Constraint spring
+ Randbedingung Feder
Creates a FEM constraint for a spring acting on a face
- Creates a FEM constraint for a spring acting on a face
+ FEM-Randbedingung für eine Feder erzeugen, die auf eine Fläche einwirkt
@@ -948,12 +948,12 @@
Constraint temperature
- Constraint temperature
+ Randbedingung Temperatur
Creates a FEM constraint for a temperature/concentrated heat flux acting on a face
- Creates a FEM constraint for a temperature/concentrated heat flux acting on a face
+ FEM-Randbedingung für die Temperatur einer Fläche/konzentrierten Wärmestrom auf eine Fläche erzeugen
@@ -966,12 +966,12 @@
Constraint transform
- Constraint transform
+ Randbedingung Verformung
Create FEM constraint for transforming a face
- Create FEM constraint for transforming a face
+ FEM-Randbedingung für die Verformung einer Fläche erzeugen
@@ -989,7 +989,7 @@
Creates a FEM mesh nodes set
- Creates a FEM mesh nodes set
+ Erzeugt einen Satz an FEM-Netzknoten
@@ -1256,7 +1256,7 @@
Make FEM constraint for bearing
- Make FEM constraint for bearing
+ FEM-Randbedingung für Wälzlager erstellen
@@ -1266,12 +1266,12 @@
Make FEM constraint displacement on face
- Make FEM constraint displacement on face
+ FEM-Randbedingungen für Verschiebung/Verdrehung einer Fläche erzeugen
Make FEM constraint fixed geometry
- Make FEM constraint fixed geometry
+ FEM-Randbedingung für Fixierung einer geometrischen Einheit erzeugen
@@ -1281,22 +1281,22 @@
Make FEM constraint force on geometry
- Make FEM constraint force on geometry
+ FEM-Randbedingung für Krafteinwirkung auf eine Geometrie erzeugen
Make FEM constraint for gear
- Make FEM constraint for gear
+ FEM-Randbedinung für Zahnrad erstellen
Make FEM constraint heatflux on face
- Make FEM constraint heatflux on face
+ FEM-Randbedingung für Wärmestrom auf eine Fläche erzeugen
Make FEM constraint initial temperature on body
- Make FEM constraint initial temperature on body
+ FEM-Randbedingung für Starttemperatur eines Körpers erzeugen
@@ -1306,32 +1306,32 @@
Make FEM constraint pressure on face
- Make FEM constraint pressure on face
+ FEM-Randbedingung für Druck auf eine Fläche erzeugen
Make FEM constraint spring on face
- Make FEM constraint spring on face
+ FEM-Randbedingung für eine Feder erstellen, die auf eine Fläche einwirkt
Make FEM constraint for pulley
- Make FEM constraint for pulley
+ FEM-Randbedingung für Riemenscheibe erzeugen
Make FEM constraint temperature on face
- Make FEM constraint temperature on face
+ FEM-Randbedingung für die Temperatur einer Fläche erzeugen
Make FEM constraint transform on face
- Make FEM constraint transform on face
+ FEM-Randbedingung für die Verformung einer Fläche erzeugen
Place robot
- Place robot
+ Roboter platzieren
@@ -1341,7 +1341,7 @@
Create nodes set
- Create nodes set
+ Knotenpunktsatz erstellen
@@ -1376,7 +1376,7 @@
Mesh groups detected. Please choose values for the different groups.
- Mesh groups detected. Please choose values for the different groups.
+ Netzgruppen erkannt. Bitte Werte für die verschiedenen Gruppen wählen.
@@ -1406,7 +1406,7 @@
Select the vertices, lines and surfaces:
- Select the vertices, lines and surfaces:
+ Eckpunkte, Linien und Oberflächen auswählen:
@@ -1440,8 +1440,7 @@
Insert component's
initial temperature:
- Insert component's
- initial temperature:
+ Eingabe der Starttemperatur der Komponente:
@@ -1468,7 +1467,7 @@
Leave blank to use default CalculiX ccx binary file
- Freilassen, um die Standard-CalculiX ccx Binär-Datei zu verwenden
+ Freilassen, um die Standard-CalculiX ccx-Binärdatei zu verwenden
@@ -1488,12 +1487,12 @@
Search in known binary directories
- Search in known binary directories
+ Suche in bekannten Verzeichnissen für ausführbare Dateien
ccx binary path
- ccx binary path
+ Pfad der ccx-Binärdatei
@@ -1508,7 +1507,7 @@
CalculiX binary
- CalculiX binary
+ CalculiX-Binärdatei
@@ -1558,7 +1557,7 @@
Use non-linear geometry
- Use non-linear geometry
+ Nichtlineare Geometrie verwenden
@@ -1573,7 +1572,7 @@
Non-linear geometry
- Non-linear geometry
+ Nichtlineare Geometrie
@@ -1588,7 +1587,7 @@
Iterative Scaling
- Iterative Scaling
+ Iterative Skalierung
@@ -1623,7 +1622,7 @@
Maximum number of iterations
- Maximum number of iterations
+ Maximale Anzahl an Iterationen
@@ -1667,48 +1666,48 @@
Elmer
- Elmer
+ Elmer
Elmer binaries
- Elmer binaries
+ Elmer ausführbare Dateien
Leave blank to use default ElmerGrid binary file
- Leave blank to use default ElmerGrid binary file
+ Freilassen, um die Standard-ElmerGrid-Binärdatei zu verwenden
ElmerSolver binary path
- ElmerSolver binary path
+ Pfad der ElmerSolver-Binärdatei
ElmerGrid binary path
- ElmerGrid binary path
+ Pfad der ElmerGrid-Binärdatei
ElmerGrid:
- ElmerGrid:
+ ElmerGrid:
Search in known binary directories
- Search in known binary directories
+ Suche in bekannten Verzeichnissen für ausführbare Dateien
ElmerSolver:
- ElmerSolver:
+ ElmerSolver:
Leave blank to use default Elmer elmer binary file
- Leave blank to use default Elmer elmer binary file
+ Freilassen, um die Standard-Elmer-Binärdatei zu verwenden
@@ -1779,7 +1778,7 @@ not belonging to faces and faces not belonging to volumes.
Which mesh elements to export
- Which mesh elements to export
+ Netzelemente für Export
@@ -1822,12 +1821,12 @@ not belonging to faces and faces not belonging to volumes.
Use custom directory
- Use custom directory
+ Benutzerdefiniertes Verzeichnis verwenden
Use directory set below. Create own subdirectory for every solver. Name directory after the solver label prefixed with the document name.
- Use directory set below. Create own subdirectory for every solver. Name directory after the solver label prefixed with the document name.
+ Verwende das unten festgelegte Verzeichnis. Erzeuge ein eigenes Unterverzeichnis für jeden Solver. Benenne das Verzeichnis nach dem Solver-Label mit vorangestelltem Dokumenten-Namen.
@@ -1847,7 +1846,7 @@ not belonging to faces and faces not belonging to volumes.
Create mesh groups for analysis reference shapes (highly experimental)
- Create mesh groups for analysis reference shapes (highly experimental)
+ Erzeuge Netzgruppen für Analysereferenzformen (sehr experimentell)
@@ -1862,7 +1861,7 @@ not belonging to faces and faces not belonging to volumes.
Restore result dialog settings
- Restore result dialog settings
+ Ergebnisdialogeinstellungen wiederherstellen
@@ -1880,12 +1879,12 @@ not belonging to faces and faces not belonging to volumes.
Gmsh binary
- Gmsh binary
+ Gmsh-Binärdatei
Search in known binary directories
- Search in known binary directories
+ Suche in bekannten Verzeichnissen für ausführbare Dateien
@@ -1895,12 +1894,12 @@ not belonging to faces and faces not belonging to volumes.
gmsh binary path
- gmsh binary path
+ Pfad der gmsh-Binärdatei
Leave blank to use default gmsh binary file
- Leave blank to use default gmsh binary file
+ Freilassen, um die Standard-gmsh-Binärdatei zu verwenden
@@ -1908,7 +1907,7 @@ not belonging to faces and faces not belonging to volumes.
VTK
- VTK
+ VTK
@@ -1951,12 +1950,12 @@ exported from FreeCAD.
VTK result object
- VTK result object
+ VTK-Ergebnisobjekt
FEM mesh object
- FEM mesh object
+ FEM-Netzobjekt
@@ -2018,27 +2017,27 @@ exported from FreeCAD.
Mystran
- Mystran
+ Mystran
Mystran binary
- Mystran binary
+ Mystran-Binärdatei
Search in known binary directories
- Search in known binary directories
+ Suche in bekannten Verzeichnissen für ausführbare Dateien
Mystran binary path
- Mystran binary path
+ Pfad der Mystran-Binärdatei
Leave blank to use default Mystran binary file location
- Leave blank to use default Mystran binary file location
+ Freilassen, um den Standard-Ablagort der Mystran-Binärdatei zu verwenden
@@ -2061,27 +2060,27 @@ exported from FreeCAD.
Z88 binary
- Z88-Binärcode
+ Z88-Binärdatei
Search in known binary directories
- Search in known binary directories
+ Suche in bekannten Verzeichnissen für ausführbare Dateien
z88r
- z88r
+ z88r
z88r binary path
- z88r binary path
+ Pfad der z88r-Binärdatei
Leave blank to use default Z88 z88r binary file
- Leave blank to use default Z88 z88r binary file
+ Freilassen, um die Standard-Z88 z88r-Binärdatei zu verwenden
@@ -2457,7 +2456,7 @@ exported from FreeCAD.
Turbulence
- Turbulence
+ Turbulenz
@@ -2503,7 +2502,7 @@ exported from FreeCAD.
Flux [W/m2]
- Flux [W/m2]
+ Fluss [W/m2]
@@ -2669,7 +2668,7 @@ exported from FreeCAD.
Selection must only consist of faces!
- Selection must only consist of faces!
+ Auswahl darf nur aus Flächen bestehen!
@@ -3183,12 +3182,12 @@ exported from FreeCAD.
Fluid Section Parameter
- Fluid Section Parameter
+ Fluid-Abschnitt Parameter
Liquid Section Parameter
- Liquid Section Parameter
+ Flüssigkeitsabschnitt Parameter
@@ -3259,7 +3258,7 @@ exported from FreeCAD.
Inlet Mass Flow Rate
- Inlet Mass Flow Rate
+ Einlass-Massenstrom
@@ -3281,7 +3280,7 @@ exported from FreeCAD.
Outlet Mass Flow Rate
- Outlet Mass Flow Rate
+ Auslass-Massenstrom
@@ -3300,7 +3299,7 @@ exported from FreeCAD.
Diaphragm Area
- Diaphragm Area
+ Membranbereich
@@ -3355,7 +3354,7 @@ exported from FreeCAD.
Flow rate [mm^3/s]
- Flow rate [mm^3/s]
+ Fließrate [mm^3/s]
@@ -3483,12 +3482,12 @@ exported from FreeCAD.
Capacity Body:
Enabled by 'Calculate Capacity Matrix' in Electrostatic equation
- Capacity Body:
+ Kapazitätskörper:
Calculate Electric Force
- Calculate Electric Force
+ Elektrische Kraft berechnen
@@ -3578,7 +3577,7 @@ exported from FreeCAD.
Mesh boundary layer settings
- Mesh boundary layer settings
+ Netz-Grenzschicht-Einstellungen
@@ -3593,7 +3592,7 @@ exported from FreeCAD.
Min/1st thickness
- Min/1st thickness
+ Min./1. Dicke
@@ -3603,12 +3602,12 @@ exported from FreeCAD.
Mesh group
- Mesh group
+ Netzgruppe
Identifier used for mesh export
- Identifier used for mesh export
+ Für den Mesh-Export verwendete Kennung
@@ -3623,7 +3622,7 @@ exported from FreeCAD.
Mesh region
- Mesh region
+ Netzregion
@@ -3636,12 +3635,12 @@ exported from FreeCAD.
FEM Mesh by Gmsh
- FEM Mesh by Gmsh
+ FEM-Netz durch Gmsh
FEM Mesh Parameter
- FEM Mesh Parameter
+ FEM-Netzparameter
@@ -3667,7 +3666,7 @@ exported from FreeCAD.
Element order:
- Element order:
+ Elementreihenfolge:
@@ -3794,12 +3793,12 @@ exported from FreeCAD.
Constraint displacement
- Constraint displacement
+ Randbedingungen Verschiebung/Verdrehung
Constraint fixed
- Beschränkung fixiert
+ Randbedingung Fixierung
@@ -3809,7 +3808,7 @@ exported from FreeCAD.
Constraint heat flux
- Constraint heat flux
+ Randbedingung Wärmestrom
@@ -3824,27 +3823,27 @@ exported from FreeCAD.
Constraint pressure
- Constraint pressure
+ Randbedingung Druck
Constraint pulley
- Constraint pulley
+ Randbedingung Riemenscheibe
Constraint spring
- Constraint spring
+ Randbedingung Feder
Constraint temperature
- Constraint temperature
+ Randbedingung Temperatur
Constraint transform
- Constraint transform
+ Randbedingung Verformung
@@ -3877,12 +3876,12 @@ exported from FreeCAD.
Displacement Y
- Displacement Y
+ Verschiebung Y
Displacement X
- Displacement X
+ Verschiebung X
@@ -3892,7 +3891,7 @@ exported from FreeCAD.
Displacement Z
- Displacement Z
+ Verschiebung Z
@@ -3902,27 +3901,27 @@ exported from FreeCAD.
von Mises Stress
- von Mises Stress
+ von-Mises-Spannung
Max Principal Stress
- Max Principal Stress
+ Max. Normalspannung
Min Principal Stress
- Min Principal Stress
+ Min. Normalspannung
Max Shear Stress (Tresca)
- Max Shear Stress (Tresca)
+ Max. Scherspannung (Tresca)
Mass Flow Rate
- Mass Flow Rate
+ Massenstrom
@@ -3972,7 +3971,7 @@ exported from FreeCAD.
Calculate and plot
- Calculate and plot
+ Berechnen und aufzeichnen
@@ -3990,7 +3989,7 @@ p, li { white-space: pre-wrap; }
Hints user defined equations
- Hints user defined equations
+ Hinweise für benutzerdefinierte Gleichungen
@@ -4015,7 +4014,7 @@ p, li { white-space: pre-wrap; }
von Mises stress: vM
- von Mises stress: vM
+ von-Mises-Spannung: vM
@@ -4030,7 +4029,7 @@ p, li { white-space: pre-wrap; }
principal stresses: P1, P2, P3
- principal stresses: P1, P2, P3
+ Normalspannungen: P1, P2, P3
@@ -4607,7 +4606,7 @@ normal vector of the face is used as direction
Temperature[K]
- Temperature[K]
+ Temperatur [K]
@@ -4625,7 +4624,7 @@ normal vector of the face is used as direction
Prescribed Force
- Prescribed Force
+ Vorgeschriebene Kraft
@@ -4675,12 +4674,12 @@ normal vector of the face is used as direction
TaskFemConstraintHeatflux
- TaskFemConstraintHeatflux
+ TaskFemConstraintHeatflux
Select multiple face(s), click Add or Remove:
- Select multiple face(s), click Add or Remove:
+ Wähle mehrere Flächen aus und klicke auf Hinzufügen oder Entfernen:
@@ -4716,7 +4715,7 @@ normal vector of the face is used as direction
Ambient Temperature
- Umgebungstemperatur
+ Umgebungstemperatur
@@ -4735,7 +4734,7 @@ normal vector of the face is used as direction
Insert component's initial temperature:
- Insert component's initial temperature:
+ Initiale Temperatur der Komponente eingeben:
@@ -5024,7 +5023,7 @@ normal vector of the face is used as direction
Create Plot
- Create Plot
+ Diagramm erstellen
@@ -5313,7 +5312,7 @@ normal vector of the face is used as direction
Tetrahedron count:
- Tetrahedron count:
+ Tetraederanzahl:
@@ -5411,12 +5410,12 @@ normal vector of the face is used as direction
Constraints without solver
- Constraints without solver
+ Randbedingungen ohne Solver
&Constraints without solver
- &Constraints without solver
+ &Randbedingungen ohne Solver
diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm
index 35c40212e5..d4ef6e268d 100755
Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.qm differ
diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts
index 4eb24dbb8a..39ea79150a 100755
--- a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts
+++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts
@@ -179,7 +179,7 @@
Constraint sectionprint
- Contrainte d'empreinte de la section
+ Contrainte d'empreinte de section
@@ -3994,7 +3994,7 @@ p, li { white-space: pre-wrap; }
Available result types:
- Available result types:
+ Types de résultats disponibles :
diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm
index a0a7da0e62..b3da30243d 100755
Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.qm differ
diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts
index 2a3fbdbe93..8ccb4c30a6 100755
--- a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts
+++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts
@@ -107,7 +107,7 @@
Creates a FEM constant vacuum permittivity to overwrite standard value
- Creates a FEM constant vacuum permittivity to overwrite standard value
+ Stvara FEM konstantnu permitivnost vakuuma za prepisivanje standardne vrijednosti
@@ -128,12 +128,12 @@
Constraint centrif
- Constraint centrif
+ Centrifugalno ograničenje
Creates a FEM constraint centrif
- Creates a FEM constraint centrif
+ Stvara FEM ograničenje centrifuge
@@ -180,12 +180,12 @@
Constraint sectionprint
- Constraint sectionprint
+ Ograničenje odjeljka ispisa
Creates a FEM constraint sectionprint
- Creates a FEM constraint sectionprint
+ Stvori FEM odjeljak ispisa
@@ -206,12 +206,12 @@
Constraint tie
- Constraint tie
+ Ograničenje poveza
Creates a FEM constraint tie
- Creates a FEM constraint tie
+ Stvara FEM ograničenje poveza
@@ -224,7 +224,7 @@
Creates a FEM fluid section for 1D flow
- Creates a FEM fluid section for 1D flow
+ Stvara FEM odjeljak tekućine za 1D protok
@@ -284,12 +284,12 @@
Electricforce equation
- Electricforce equation
+ Jednadžba električne sile
Creates a FEM equation for electric forces
- Creates a FEM equation for electric forces
+ Stvori FEM Jednadžbu električne sile
@@ -323,12 +323,12 @@
Flux equation
- Flux equation
+ Jednadžba Protoka
Creates a FEM equation for flux
- Creates a FEM equation for flux
+ Stvara FEM jednadžbu za protok
@@ -336,12 +336,12 @@
Heat equation
- Heat equation
+ Jednadžba topline
Creates a FEM equation for heat
- Creates a FEM equation for heat
+ Stvara FEM jednadžbe za toplinu
@@ -349,7 +349,7 @@
Open FEM examples
- Open FEM examples
+ Otvori FEM primjer
@@ -388,7 +388,7 @@
Creates a FEM material for fluid
- Creates a FEM material for fluid
+ Stvara FEM materijal za tekučinu
@@ -427,7 +427,7 @@
Creates a FEM material for solid
- Creates a FEM material for solid
+ Stvara FEM materijal za kruto tijelo
@@ -500,7 +500,7 @@
Create a FEM mesh from a solid or face shape by Netgen internal mesher
- Create a FEM mesh from a solid or face shape by Netgen internal mesher
+ Kreiranje FEM mreže iz krutog tijela ili oblika lica uz pomoć Netgenovog internog kreatora mreža
@@ -591,7 +591,7 @@
Creates a FEM solver Elmer
- Creates a FEM solver Elmer
+ Stvara FEM rješavač Elmer
@@ -604,7 +604,7 @@
Creates a FEM solver Mystran
- Creates a FEM solver Mystran
+ Stvara FEM rješavač Mystran
@@ -720,7 +720,7 @@
Creates a FEM constraint for a bearing
- Creates a FEM constraint for a bearing
+ Stvori FEM ograničenje za ležaj
@@ -774,7 +774,7 @@
Creates a FEM constraint for a fixed geometric entity
- Creates a FEM constraint for a fixed geometric entity
+ Stvori FEM ograničenje za fiksnu geometrijsku cjelinu
@@ -810,7 +810,7 @@
Creates a FEM constraint for a force acting on a geometric entity
- Creates a FEM constraint for a force acting on a geometric entity
+ Stvori FEM ograničenje za djelovanje sile na geometrijsku cjelinu
@@ -828,7 +828,7 @@
Creates a FEM constraint for a gear
- Creates a FEM constraint for a gear
+ Stvori FEM ograničenje za zupčanik
@@ -846,7 +846,7 @@
Creates a FEM constraint for a heatflux acting on a face
- Creates a FEM constraint for a heatflux acting on a face
+ Stvori FEM ograničenje za toplotni tok koji djeluje na lice
@@ -900,7 +900,7 @@
Creates a FEM constraint for a pressure acting on a face
- Creates a FEM constraint for a pressure acting on a face
+ Stvori FEM ograničenje za pritisak koji djeluje na lice
@@ -936,7 +936,7 @@
Creates a FEM constraint for a spring acting on a face
- Creates a FEM constraint for a spring acting on a face
+ Stvori FEM ograničenje za oprugu koja djeluje na lice
@@ -1257,7 +1257,7 @@
Make FEM constraint for bearing
- Make FEM constraint for bearing
+ Stvori FEM ograničenje za ležaj
@@ -1419,13 +1419,13 @@
25
- 25
+ 25
ºC
- ºC
+ ºC
@@ -1717,7 +1717,7 @@
INP
- INP
+ INP
@@ -1909,7 +1909,7 @@ not belonging to faces and faces not belonging to volumes.
VTK
- VTK
+ VTK
@@ -1962,7 +1962,8 @@ exported from FreeCAD.
FreeCAD result object
- FreeCAD result object
+ FreeCAD Objekt rezultata
+
diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm
index 959558d9a2..cdb4c64647 100755
Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_it.qm differ
diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts
index dbe2980096..7e160cf3f7 100755
--- a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts
+++ b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts
@@ -1207,7 +1207,7 @@
Wrong selection type
- Wrong selection type
+ Tipo di selezione errato
diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ka.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_ka.qm
index 727414e485..8953344230 100644
Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_ka.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_ka.qm differ
diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts
index 5a49602a87..ded5828b90 100644
--- a/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts
+++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts
@@ -80,12 +80,12 @@
Clipping plane on face
- Clipping plane on face
+ კვეთის სიბრტყე ზედაპირზე
Add a clipping plane on a selected face
- Add a clipping plane on a selected face
+ მონიშნულ ზედაპირზე მკვეთი სიბრტყის დამატება
@@ -93,7 +93,7 @@
Remove all clipping planes
- Remove all clipping planes
+ კვეთის ყველა სიბრტყის მოცილება
@@ -127,7 +127,7 @@
Constraint centrif
- Constraint centrif
+ ცენტრიფუგის შეზღუდვა
@@ -153,7 +153,7 @@
Constraint flow velocity
- Constraint flow velocity
+ დინების სიჩქარის ზღვარი
@@ -192,7 +192,7 @@
Constraint self weight
- Constraint self weight
+ საკუთარი წონის შეზღუდვა
@@ -231,12 +231,12 @@
Beam cross section
- Beam cross section
+ კოჭის კვეთი
Creates a FEM beam cross section
- Creates a FEM beam cross section
+ სემ კოჭის კვეთის სექციის შექმნა
@@ -262,7 +262,7 @@
Creates a FEM beam rotation
- Creates a FEM beam rotation
+ სემ კოჭის შემობრუნების შექმნა
@@ -270,7 +270,7 @@
Elasticity equation
- Elasticity equation
+ დრეკადობის განტოლება
@@ -356,7 +356,7 @@
FEM mesh to mesh
- სებ ბადიდან ბადემდე
+ სემ ბადიდან ბადემდე
@@ -460,7 +460,7 @@
Display FEM mesh info
- Display FEM mesh info
+ სემ ბადის ინფორმაციის ჩვენება
@@ -598,7 +598,7 @@
Solver Mystran
- Solver Mystran
+ Mystran ამომხსნელი
@@ -611,7 +611,7 @@
Run solver calculations
- Run solver calculations
+ ამომხსნელის გამოთვლების გაშვება
@@ -629,7 +629,7 @@
Creates a FEM solver Z88
- Creates a FEM solver Z88
+ სემ Z88 ამოხსნელისთვის ამოცანის შექმნა
@@ -732,7 +732,7 @@
Constraint contact
- Constraint contact
+ კონტაქტის შეზღუდვა
@@ -894,7 +894,7 @@
Constraint pressure
- Constraint pressure
+ წნევის შეზღუდვა
@@ -948,7 +948,7 @@
Constraint temperature
- Constraint temperature
+ ტემპერატურის შეზღუდვა
@@ -966,7 +966,7 @@
Constraint transform
- Constraint transform
+ გარდაქნის შეზღუდვა
@@ -1049,12 +1049,12 @@
Region clip filter
- Region clip filter
+ არეალის კვეთის ფილტრი
Define/create a clip filter which uses functions to define the cliped region
- Define/create a clip filter which uses functions to define the cliped region
+ ფილტრის აღწერა/შექმნა, რომელიც კვეთის არეალის აღსაწერად ფუნქციებს იყენებს
@@ -1072,7 +1072,7 @@
Data At Point
- Data At Point
+ წერტილის მონაცემები
@@ -1103,12 +1103,12 @@
Line clip filter
- Line clip filter
+ ხაზის კვეთის ფილტრი
Define/create a clip filter which clips a field along a line
- Define/create a clip filter which clips a field along a line
+ ფილტრის აღწერა/შექმნა, რომელიც ველს ხაზის გასწვრივ კვეთს
@@ -1121,12 +1121,12 @@
Data at point clip filter
- Data at point clip filter
+ მონაცემების ფილტრი წერტილის ჭრილზე
Define/create a clip filter which clips a field data at point
- Define/create a clip filter which clips a field data at point
+ ფილტრის აღწერა/შექმნა, რომელიც ველის მონაცემებს წერტილზე კვეთს
@@ -1144,7 +1144,7 @@
Functions for use in postprocessing filter...
- Functions for use in postprocessing filter...
+ პოსტპროცესორის ფილტრის მიერ გამოყენებული ფუნქციები...
@@ -1207,7 +1207,7 @@
Wrong selection type
- Wrong selection type
+ მონიშნულის არასწორი ტიპი
@@ -1225,12 +1225,12 @@
Scalar clip filter
- Scalar clip filter
+ სკალარის კვეთის ფილტრი
Define/create a clip filter which clips a field with a scalar value
- Define/create a clip filter which clips a field with a scalar value
+ ფილტრის აღწერა/შექმნა, რომელიც ველს სკალარული მნიშვნელობით კვეთს
@@ -1498,7 +1498,7 @@
Input file splitting
- Input file splitting
+ შესატანი ფაილის დაშლა
@@ -1513,7 +1513,7 @@
Analysis defaults
- Analysis defaults
+ ანალიზის ნაგულისხმევი მნიშვნელობები
@@ -1558,7 +1558,7 @@
Use non-linear geometry
- Use non-linear geometry
+ არახაზოვანი გეომეტრიის გამოყენება
@@ -1573,7 +1573,7 @@
Non-linear geometry
- Non-linear geometry
+ არახაზოვანი გეომეტრია
@@ -1588,12 +1588,12 @@
Iterative Scaling
- Iterative Scaling
+ იტერაციული მასშტაბირება
Iterative Cholesky
- Iterative Cholesky
+ ჩოლესკის იტერაცია
@@ -1648,12 +1648,12 @@
High frequency limit
- High frequency limit
+ მაღალი სიხშირის ლიმიტი
Low frequency limit
- Low frequency limit
+ დაბალი სიხშირის ლიმიტი
@@ -1737,7 +1737,7 @@ constraint or material is applied.
Export group data
- Export group data
+ ჯგუფის მონაცემების გატანა
@@ -1802,7 +1802,7 @@ not belonging to faces and faces not belonging to volumes.
Temporary directories
- Temporary directories
+ დროებითი საქაღალდეები
@@ -1812,7 +1812,7 @@ not belonging to faces and faces not belonging to volumes.
Beside .FCStd file
- Beside .FCStd file
+ .FCTd ფაილის გვერდით
@@ -1822,7 +1822,7 @@ not belonging to faces and faces not belonging to volumes.
Use custom directory
- Use custom directory
+ მითითებული საქაღალდის გამოყენება
@@ -1956,12 +1956,12 @@ exported from FreeCAD.
FEM mesh object
- სებ ბადის ობიექტი
+ სემ ბადის ობიექტი
FreeCAD result object
- FreeCAD result object
+ FreeCAD-ის შედეგი ობიექტი
@@ -1974,7 +1974,7 @@ exported from FreeCAD.
Card resources
- Card resources
+ ბარათის რესურსები
@@ -2004,7 +2004,7 @@ exported from FreeCAD.
Delete card duplicates
- Delete card duplicates
+ ბარათის ასლების წაშლა
@@ -2230,7 +2230,7 @@ exported from FreeCAD.
Edit FEM mesh
- სებ ბადის ჩასწორება
+ სემ ბადის ჩასწორება
@@ -2259,7 +2259,7 @@ exported from FreeCAD.
FEM constraint parameters
- FEM constraint parameters
+ სემ შეზღუდვის პარამეტრები
@@ -2287,7 +2287,7 @@ exported from FreeCAD.
Only faces can be picked
- Only faces can be picked
+ შეგიძლიათ აირჩიოთ მხოლოდ ზედაპირები
@@ -2376,7 +2376,7 @@ exported from FreeCAD.
Only faces can be picked
- Only faces can be picked
+ შეგიძლიათ აირჩიოთ მხოლოდ ზედაპირები
@@ -2482,7 +2482,7 @@ exported from FreeCAD.
Length Scale[m]
- Length Scale[m]
+ სიგრძის მასშტაბი[m]
@@ -2707,7 +2707,7 @@ exported from FreeCAD.
Only faces can be picked
- Only faces can be picked
+ შეგიძლიათ აირჩიოთ მხოლოდ ზედაპირები
@@ -2741,7 +2741,7 @@ exported from FreeCAD.
Only faces can be picked
- Only faces can be picked
+ შეგიძლიათ აირჩიოთ მხოლოდ ზედაპირები
@@ -2783,7 +2783,7 @@ exported from FreeCAD.
Only faces can be picked
- Only faces can be picked
+ შეგიძლიათ აირჩიოთ მხოლოდ ზედაპირები
@@ -2814,7 +2814,7 @@ exported from FreeCAD.
Constraint update error
- Constraint update error
+ შეზღუდვის განახლების შეცდომა
@@ -2861,7 +2861,7 @@ exported from FreeCAD.
Only faces can be picked
- Only faces can be picked
+ შეგიძლიათ აირჩიოთ მხოლოდ ზედაპირები
@@ -2919,7 +2919,7 @@ exported from FreeCAD.
Result display options
- Result display options
+ შედეგის ჩვენების მორგება
@@ -2935,7 +2935,7 @@ exported from FreeCAD.
Scalar clip options
- Scalar clip options
+ სკალარის ფილტრის მორგება
@@ -3020,7 +3020,7 @@ exported from FreeCAD.
Material Description
- Material Description
+ მასალის აღწერა
@@ -3055,7 +3055,7 @@ exported from FreeCAD.
Mechanical Properties
- Mechanical Properties
+ მექანიკური თვისებები
@@ -3090,12 +3090,12 @@ exported from FreeCAD.
Thermal Properties
- Thermal Properties
+ თერმული თვისებები
Thermal Conductivity:
- Thermal Conductivity:
+ თბოგამტარობა:
@@ -3105,7 +3105,7 @@ exported from FreeCAD.
Expansion Coefficient:
- Expansion Coefficient:
+ გაფართოების კოეფიციენტი:
@@ -3125,7 +3125,7 @@ exported from FreeCAD.
Vol Expansion Coeff
- Vol Expansion Coeff
+ მოცულობის გაფართ. კოეფ
@@ -3183,12 +3183,12 @@ exported from FreeCAD.
Fluid Section Parameter
- Fluid Section Parameter
+ სითხის სექციის პარამეტრი
Liquid Section Parameter
- Liquid Section Parameter
+ თხევადი სექციის პარამეტრი
@@ -3227,7 +3227,7 @@ exported from FreeCAD.
Manning Coefficient
- Manning Coefficient
+ მანინგის კოეფიციენტი
@@ -3259,7 +3259,7 @@ exported from FreeCAD.
Inlet Mass Flow Rate
- Inlet Mass Flow Rate
+ შემავალი მასის დინების სიჩქარე
@@ -3325,7 +3325,7 @@ exported from FreeCAD.
Pump Characteristic
- Pump Characteristic
+ ტუმბოს მახასიათებლები
@@ -3375,7 +3375,7 @@ exported from FreeCAD.
Gas Section Parameter
- Gas Section Parameter
+ აირის სექციის პარამეტრი
@@ -3385,7 +3385,7 @@ exported from FreeCAD.
Centrif parameter
- Centrif parameter
+ ცენტრიფუგის პარამეტრი
@@ -3404,7 +3404,7 @@ exported from FreeCAD.
revolutions per second
- revolutions per second
+ ბრუნი წუთში
@@ -3445,7 +3445,7 @@ exported from FreeCAD.
Constraint Properties
- Constraint Properties
+ შეზღუდვის თვისებები
@@ -3455,7 +3455,7 @@ exported from FreeCAD.
Potential Constant
- Potential Constant
+ პოტენციალის კონსტანტა
@@ -3493,7 +3493,7 @@ exported from FreeCAD.
Beam section parameter
- Beam section parameter
+ კოჭის სექციის პარამეტრი
@@ -3525,7 +3525,7 @@ exported from FreeCAD.
Shell thickness parameter
- Shell thickness parameter
+ გარსის სისქის პარამეტრი
@@ -3593,7 +3593,7 @@ exported from FreeCAD.
Min/1st thickness
- Min/1st thickness
+ მინ/პირველი სისქე
@@ -3636,12 +3636,12 @@ exported from FreeCAD.
FEM Mesh by Gmsh
- Gmsh-ის შექმნილი სებ ფილტრი
+ Gmsh-ის შექმნილი სემ ფილტრი
FEM Mesh Parameter
- სებ ბადის პარამეტრი
+ სემ ბადის პარამეტრი
@@ -3708,7 +3708,7 @@ exported from FreeCAD.
No active Analysis
- No active Analysis
+ აქტიური ანალიზები არ არსებობს
@@ -3789,7 +3789,7 @@ exported from FreeCAD.
Constraint Contact
- Constraint Contact
+ კონტაქტის შეზღუდვა
@@ -3824,7 +3824,7 @@ exported from FreeCAD.
Constraint pressure
- Constraint pressure
+ წნევის შეზღუდვა
@@ -3839,17 +3839,17 @@ exported from FreeCAD.
Constraint temperature
- Constraint temperature
+ ტემპერატურის შეზღუდვა
Constraint transform
- Constraint transform
+ გარდაქნის შეზღუდვა
Edit post processing object
- Edit post processing object
+ პოსტპროცესორის ობიექტის ჩასწორება
@@ -3902,7 +3902,7 @@ exported from FreeCAD.
von Mises Stress
- von Mises Stress
+ ფონ მიზესის სტრესი
@@ -3972,7 +3972,7 @@ exported from FreeCAD.
Calculate and plot
- Calculate and plot
+ დათვლა და დახაზვა
@@ -3995,7 +3995,7 @@ p, li { white-space: pre-wrap; }
Available result types:
- Available result types:
+ შედეგის ხელმისაწვდომი ტიპები:
@@ -4005,7 +4005,7 @@ p, li { white-space: pre-wrap; }
mass flow rate: MF
- mass flow rate: MF
+ მასის დინების სიჩქარე: მდ
@@ -4073,7 +4073,7 @@ p, li { white-space: pre-wrap; }
Mechanical analysis
- Mechanical analysis
+ მექანიკური ანალიზი
@@ -4093,7 +4093,7 @@ p, li { white-space: pre-wrap; }
Thermo mechanical
- Thermo mechanical
+ თერმომექანიკური
@@ -4326,7 +4326,7 @@ p, li { white-space: pre-wrap; }
Belt tension force
- Belt tension force
+ სარტყლის დაჭიმვის ძალა
@@ -4336,7 +4336,7 @@ p, li { white-space: pre-wrap; }
Force location [deg]
- Force location [deg]
+ ძალის მდებარეობა [deg]
@@ -4346,7 +4346,7 @@ p, li { white-space: pre-wrap; }
Reversed direction
- Reversed direction
+ შებრუნებული მიმართულება
@@ -4396,12 +4396,12 @@ p, li { white-space: pre-wrap; }
Contact Stiffness
- Contact Stiffness
+ შეხების სიმაგრე
Friction coefficient
- Friction coefficient
+ ხახუნის კოეფიციენტი
@@ -4582,7 +4582,7 @@ normal vector of the face is used as direction
Turbulence specification
- Turbulence specification
+ ტურბულენციის სპეციფიკაცია
@@ -4675,7 +4675,7 @@ normal vector of the face is used as direction
TaskFemConstraintHeatflux
- TaskFemConstraintHeatflux
+ TaskFemConstraintHeatflux
@@ -4695,7 +4695,7 @@ normal vector of the face is used as direction
Surface Convection
- Surface Convection
+ ზედაპირის კონვექცია
@@ -4716,7 +4716,7 @@ normal vector of the face is used as direction
Ambient Temperature
- Ambient Temperature
+ გარემოს ტემპერატურა
@@ -4801,7 +4801,7 @@ normal vector of the face is used as direction
Reverse Direction
- Reverse Direction
+ მიმართულების შემობრუნება
@@ -4932,7 +4932,7 @@ normal vector of the face is used as direction
Transformable surfaces
- Transformable surfaces
+ გარდაქმნადი ზედაპირები
@@ -5078,7 +5078,7 @@ normal vector of the face is used as direction
Surface with Edges
- Surface with Edges
+ წიბოებიანი ზედაპირი
@@ -5157,7 +5157,7 @@ normal vector of the face is used as direction
Surface with Edges
- Surface with Edges
+ წიბოებიანი ზედაპირი
@@ -5172,7 +5172,7 @@ normal vector of the face is used as direction
Clip scalar
- Clip scalar
+ სკალარის კვეთი
@@ -5313,7 +5313,7 @@ normal vector of the face is used as direction
Tetrahedron count:
- Tetrahedron count:
+ ტეტრაჰედრონების რიცხვი:
@@ -5371,42 +5371,42 @@ normal vector of the face is used as direction
Fluid Constraints
- Fluid Constraints
+ სითხის შეზღუდვები
&Fluid Constraints
- &Fluid Constraints
+ &სითხის შეზღუდვები
Geometrical Constraints
- Geometrical Constraints
+ გეომეტრიული შეზღუდვები
&Geometrical Constraints
- &Geometrical Constraints
+ &გეომეტრიული შეზღუდვები
Mechanical Constraints
- Mechanical Constraints
+ მექანიკური შეზღუდვები
&Mechanical Constraints
- &Mechanical Constraints
+ &მექანიკური შეზღუდვები
Thermal Constraints
- Thermal Constraints
+ თერმული შეზღუდვები
&Thermal Constraints
- &Thermal Constraints
+ &თერმული შეზღუდვები
@@ -5421,12 +5421,12 @@ normal vector of the face is used as direction
Overwrite Constants
- Overwrite Constants
+ კონსტანტებზე გადაწერა
&Overwrite Constants
- &Overwrite Constants
+ &კონსტანტებზე გადაწერა
@@ -5466,7 +5466,7 @@ normal vector of the face is used as direction
&Filter functions
- &Filter functions
+ &ფილტრის ფუნქციები
diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm
index c518930846..e38b2ca5db 100644
Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.qm differ
diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts
index 536a0b8255..cbbe740629 100644
--- a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts
+++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts
@@ -1036,7 +1036,7 @@
Apply changes to parameters directly and not on recompute only...
- Uveljavi spremembe določilk neposredno in ne le pri preračunu ...
+ Uveljavi spremembe določilk neposredno in ne le pri preračunu ...
@@ -2998,7 +2998,7 @@ exported from FreeCAD.
choose...
- izberite ...
+ izberite ...
diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.qm
index 7d64c3a587..6f7b87ef6d 100644
Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.qm differ
diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.ts
index 1cb55b5dd5..d4cbe3ac38 100644
--- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.ts
+++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_sl.ts
@@ -69,7 +69,7 @@
Decimation...
- Desetkanje ...
+ Desetkanje ...
Decimates a mesh
@@ -372,7 +372,7 @@
Refinement...
- Dodelava ...
+ Dodelava ...
Refine existing mesh
@@ -1307,7 +1307,7 @@ s Phongovim senčenjem doseže gladkejši videz.
Running gmsh...
- Zaganjanje Gmsh-ja ...
+ Zaganjanje Gmsh-ja ...
Failed to start
@@ -1564,7 +1564,7 @@ s Phongovim senčenjem doseže gladkejši videz.
Parameters...
- Določilke ...
+ Določilke ...
Plane
diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.qm
index a93400f46c..566dad85e2 100644
Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.qm differ
diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.ts
index 76a27f35f0..3e17f1fdfc 100644
--- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.ts
+++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-BR.ts
@@ -11,7 +11,7 @@
Find a flat representation of a mesh.
- Find a flat representation of a mesh.
+ Encontre uma representação plana de uma malha.
diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.qm
index 53def2d2e1..5f5cffe80c 100644
Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.qm differ
diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.ts
index 1a675144d3..e107b20fa5 100644
--- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.ts
+++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_sl.ts
@@ -42,7 +42,7 @@
Curve on mesh...
- Krivulja na ploskovju ...
+ Krivulja na ploskovju ...
Creates an approximated curve on top of a mesh.
diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ka.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ka.qm
index c36e05eb55..040f4df4fb 100644
Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ka.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ka.qm differ
diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ka.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ka.ts
index 88bdffc8b4..5e18472cc5 100644
--- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ka.ts
+++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ka.ts
@@ -89,7 +89,7 @@
Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary
- Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary
+ OpenSCAD-ის კოდის ჩასმით და OpenSCAD-ის გაშვებით OpenSCAD-ის ელემენტის დამატება
@@ -305,7 +305,7 @@
The path to the OpenSCAD executable
- The path to the OpenSCAD executable
+ ბილიკი OpenSCAD-ის გამშვებ ფაილებამდე
diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sl.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sl.qm
index 1e76e64a70..603baa50ae 100644
Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sl.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sl.qm differ
diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sl.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sl.ts
index 14b8751ce3..cb9e4d6c32 100644
--- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sl.ts
+++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sl.ts
@@ -248,7 +248,7 @@
Resize Mesh Feature...
- Prevelikostenje ploskovja ...
+ Prevelikostenje ploskovja ...
@@ -261,7 +261,7 @@
Scale Mesh Feature...
- Merilo ploskovja ...
+ Velikost ploskovja ...
diff --git a/src/Mod/Part/Gui/Resources/translations/Part_it.qm b/src/Mod/Part/Gui/Resources/translations/Part_it.qm
index 8b340e3952..fcd5ae928f 100644
Binary files a/src/Mod/Part/Gui/Resources/translations/Part_it.qm and b/src/Mod/Part/Gui/Resources/translations/Part_it.qm differ
diff --git a/src/Mod/Part/Gui/Resources/translations/Part_it.ts b/src/Mod/Part/Gui/Resources/translations/Part_it.ts
index 357cbe6e8f..1162f6c600 100644
--- a/src/Mod/Part/Gui/Resources/translations/Part_it.ts
+++ b/src/Mod/Part/Gui/Resources/translations/Part_it.ts
@@ -3865,7 +3865,7 @@ during file reading (slower but higher details).
Select this to not import any invisible objects.
- Select this to not import any invisible objects.
+ Selezionare questa opzione per non importare oggetti invisibili.
@@ -3875,7 +3875,7 @@ during file reading (slower but higher details).
Reduce number of objects using Link array
- Reduce number of objects using Link array
+ Riduce il numero di oggetti usando l'array Link
@@ -3896,7 +3896,7 @@ during file reading (slower but higher details).
Show progress bar when importing
- Show progress bar when importing
+ Mostra barra di avanzamento durante l'importazione
@@ -3921,12 +3921,12 @@ during file reading (slower but higher details).
Assembly per document
- Assembly per document
+ Assemblaggio per documento
Assembly per document in sub-directory
- Assembly per document in sub-directory
+ Assemblaggio per documento nella sotto-directory
@@ -3936,7 +3936,7 @@ during file reading (slower but higher details).
Object per document in sub-directory
- Object per document in sub-directory
+ Oggetto per documento nella sottodirectory
@@ -5501,14 +5501,14 @@ mean the checked object is unusable. Default: false
Single-threaded
- Single-threaded
+ Thread singolo
Run the geometry check in a single thread. This is slower,
but more stable. Default: false
- Run the geometry check in a single thread. This is slower,
-but more stable. Default: false
+ Esegue il controllo della geometria in un singolo thread. Questo è più lento,
+ma più stabile. Predefinito: false
@@ -5541,8 +5541,8 @@ the check geometry tool. Default: false
Show advanced shape content. Changes will take effect next time you use
the check geometry tool. Default: false
- Show advanced shape content. Changes will take effect next time you use
-the check geometry tool. Default: false
+ Mostra il contenuto della forma avanzata. Le modifiche avranno effetto la prossima volta che userai
+lo strumento della geometria di controllo. Predefinito: false
@@ -5559,7 +5559,7 @@ Individual BOP Checks:
Check for bad argument types. Default: true
- Check for bad argument types. Default: true
+ Controlla tipi di argomenti errati. Predefinito: true
@@ -5569,7 +5569,7 @@ Individual BOP Checks:
Check for self-intersections. Default: true
- Check for self-intersections. Default: true
+ Controlla auto-intersezioni. Predefinito: true
@@ -5579,17 +5579,17 @@ Individual BOP Checks:
Check for edges that are too small. Default: true
- Check for edges that are too small. Default: true
+ Controlla i bordi troppo piccoli. Predefinito: true
Nonrecoverable face
- Nonrecoverable face
+ Faccia non recuperabile
Check for nonrecoverable faces. Default: true
- Check for nonrecoverable faces. Default: true
+ Controlla le facce non recuperabili. Predefinito: vero
@@ -5604,7 +5604,7 @@ Individual BOP Checks:
Incompatibility of face
- Incompatibility of face
+ Incompatibilità della faccia
diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ka.qm b/src/Mod/Part/Gui/Resources/translations/Part_ka.qm
index c13febbc50..803e9852f2 100644
Binary files a/src/Mod/Part/Gui/Resources/translations/Part_ka.qm and b/src/Mod/Part/Gui/Resources/translations/Part_ka.qm differ
diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ka.ts b/src/Mod/Part/Gui/Resources/translations/Part_ka.ts
index 4a5286ad69..e900793ccb 100644
--- a/src/Mod/Part/Gui/Resources/translations/Part_ka.ts
+++ b/src/Mod/Part/Gui/Resources/translations/Part_ka.ts
@@ -1175,7 +1175,7 @@ Do you want to continue?
Plane is aligned to XY local plane of linked object.
AttachmentPlane mode tooltip
- Plane is aligned to XY local plane of linked object.
+ სიბრტყე სწორებულია მიბმული ობიექტის XY ლოკალურ სიბრტყესთან.
@@ -1187,7 +1187,7 @@ Do you want to continue?
Plane is aligned to XZ local plane of linked object.
AttachmentPlane mode tooltip
- Plane is aligned to XZ local plane of linked object.
+ სიბრტყე სწორებულია მიბმული ობიექტის XZ ლოკალურ სიბრტყესთან.
@@ -1199,7 +1199,7 @@ Do you want to continue?
Plane is aligned to YZ local plane of linked object.
AttachmentPlane mode tooltip
- Plane is aligned to YZ local plane of linked object.
+ სიბრტყე სწორებულია მიბმული ობიექტის YZ ლოკალურ სიბრტყესთან.
@@ -1384,7 +1384,7 @@ Do you want to continue?
X', Y', Z' axes are matched with object's local X, Z, -Y, respectively.
Attachment3D mode tooltip
- X', Y', Z' axes are matched with object's local X, Z, -Y, respectively.
+ X', Y' და Z' ღერძები დაემთხვევა ობიექტის შესაბამისად X, Z და -Y ღერძებს.
@@ -1396,7 +1396,7 @@ Do you want to continue?
X', Y', Z' axes are matched with object's local Y, Z, X, respectively.
Attachment3D mode tooltip
- X', Y', Z' axes are matched with object's local Y, Z, X, respectively.
+ X', Y' და Z' ღერძები დაემთხვევა ობიექტის შესაბამისად Y, Z და X ღერძებს.
@@ -2771,12 +2771,12 @@ of projection.
Sweep...
- Sweep...
+ შლილი...
Utility to sweep
- Utility to sweep
+ შლილის ხელსაწყო
@@ -2993,7 +2993,7 @@ of projection.
Sweep
- Sweep
+ შლილი
@@ -3041,7 +3041,7 @@ of projection.
Attachment Offset (in local coordinates):
- Attachment Offset (in local coordinates):
+ მიმაგრების წანაცვლება (ლოკალური კოორდინატები):
@@ -3084,22 +3084,22 @@ of projection.
Rotation around the x-axis
Note: The placement is expressed in local space of object being attached.
- Rotation around the x-axis
-Note: The placement is expressed in local space of object being attached.
+ X ღერძის გარშემო შემობრუნება
+შენიშვნა: მდებარეობა გამოიხატება მისამაგრებელი ობიექტის ლოკალურ სივრცეში.
Rotation around the y-axis
Note: The placement is expressed in local space of object being attached.
- Rotation around the y-axis
-Note: The placement is expressed in local space of object being attached.
+ Y ღერძის გარშემო შემობრუნება
+შენიშვნა: მდებარეობა გამოიხატება მისამაგრებელი ობიექტის ლოკალურ სივრცეში.
Rotation around the z-axis
Note: The placement is expressed in local space of object being attached.
- Rotation around the z-axis
-Note: The placement is expressed in local space of object being attached.
+ Z ღერძის გარშემო შემობრუნება
+შენიშვნა: მდებარეობა გამოიხატება მისამაგრებელი ობიექტის ლოკალურ სივრცეში.
@@ -4968,7 +4968,7 @@ the sketch plane's normal vector will be used
x-component of direction vector
- x-component of direction vector
+ მიმართულების ვექტორის X კომპონენტი
@@ -4978,7 +4978,7 @@ the sketch plane's normal vector will be used
y-component of direction vector
- y-component of direction vector
+ მიმართულების ვექტორის Y კომპონენტი
@@ -4988,7 +4988,7 @@ the sketch plane's normal vector will be used
z-component of direction vector
- z-component of direction vector
+ მიმართულების ვექტორის Z კომპონენტი
@@ -5211,7 +5211,7 @@ the sketch plane's normal vector will be used
Sweep path
- Sweep path
+ შლილის ტრაექტორია
@@ -5236,7 +5236,7 @@ the sketch plane's normal vector will be used
'%1' cannot be used as profile and path.
- '%1' cannot be used as profile and path.
+ %1-ის გამოყენება პროფილად და ტრაექტორიად შეუძლებელია.
@@ -5257,7 +5257,7 @@ the sketch plane's normal vector will be used
The selected sweep path is invalid.
- The selected sweep path is invalid.
+ მონიშნული შლილის ტრაექტორია არასწორია.
@@ -5267,7 +5267,7 @@ the sketch plane's normal vector will be used
Sweep
- Sweep
+ შლილი
@@ -5311,7 +5311,7 @@ the sketch plane's normal vector will be used
Attachment Offset (in local coordinates):
- Attachment Offset (in local coordinates):
+ მიმაგრების წანაცვლება (ლოკალური კოორდინატები):
@@ -5357,27 +5357,24 @@ of object being attached.
Rotation around the x-axis
Note: The placement is expressed in local coordinate system
of object being attached.
- Rotation around the x-axis
-Note: The placement is expressed in local coordinate system
-of object being attached.
+ X ღერძის გარშემო შემობრუნება
+შენიშვნა: მდებარეობა გამოიხატება მისამაგრებელი ობიექტის ლოკალურ კოორდინატების სისტემაში.
Rotation around the y-axis
Note: The placement is expressed in local coordinate system
of object being attached.
- Rotation around the y-axis
-Note: The placement is expressed in local coordinate system
-of object being attached.
+ Y ღერძის გარშემო შემობრუნება
+შენიშვნა: მდებარეობა გამოიხატება მისამაგრებელი ობიექტის ლოკალურ კოორდინატების სისტემაში.
Rotation around the z-axis
Note: The placement is expressed in local coordinate system
of object being attached.
- Rotation around the z-axis
-Note: The placement is expressed in local coordinate system
-of object being attached.
+ Z ღერძის გარშემო შემობრუნება
+შენიშვნა: მდებარეობა გამოიხატება მისამაგრებელი ობიექტის ლოკალურ კოორდინატების სისტემაში.
@@ -5507,14 +5504,14 @@ mean the checked object is unusable. Default: false
Single-threaded
- Single-threaded
+ ერთ ნაკადად
Run the geometry check in a single thread. This is slower,
but more stable. Default: false
- Run the geometry check in a single thread. This is slower,
-but more stable. Default: false
+ გეომეტრიის შემოწმების ერთ ნაკადად გაშვება. ეს უფრო ნელია,
+მაგრამ უფრო სტაბილური. ნაგულისხმევად: გამორთულია
@@ -5882,12 +5879,12 @@ by dragging a selection rectangle in the 3D view
Sweep
- Sweep
+ შლილი
Sweep Path
- Sweep Path
+ შლილის ტრაექტორია
@@ -6043,7 +6040,7 @@ in the 3D view for the sweep path.
Join
- შეუერთდით
+ შეერთება
diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ro.qm b/src/Mod/Part/Gui/Resources/translations/Part_ro.qm
index 903d7bbc1a..1d90f73540 100644
Binary files a/src/Mod/Part/Gui/Resources/translations/Part_ro.qm and b/src/Mod/Part/Gui/Resources/translations/Part_ro.qm differ
diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts
index d4c4d38248..f84c10a051 100644
--- a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts
+++ b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts
@@ -3914,7 +3914,7 @@ during file reading (slower but higher details).
Single document
- Single document
+ Document unic
diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sl.qm b/src/Mod/Part/Gui/Resources/translations/Part_sl.qm
index 817c56308b..8a5d9ffb8c 100644
Binary files a/src/Mod/Part/Gui/Resources/translations/Part_sl.qm and b/src/Mod/Part/Gui/Resources/translations/Part_sl.qm differ
diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sl.ts b/src/Mod/Part/Gui/Resources/translations/Part_sl.ts
index 8c9b9a3d4e..e1c0d92e0f 100644
--- a/src/Mod/Part/Gui/Resources/translations/Part_sl.ts
+++ b/src/Mod/Part/Gui/Resources/translations/Part_sl.ts
@@ -6,7 +6,7 @@
Attachment...
- Pripetek ...
+ Pripetek ...
@@ -2074,7 +2074,7 @@ na svoje X, Y in Z komponente.
Chamfer...
- Prisekaj ...
+ Prisekaj ...
@@ -2164,7 +2164,7 @@ na svoje X, Y in Z komponente.
Split objects...
- Razcepi predmete ...
+ Razcepi predmete ...
@@ -2582,7 +2582,7 @@ na svoje X, Y in Z komponente.
Create projection on surface...
- Naredi preslikavo na površje ...
+ Naredi preslikavo na površje ...
@@ -3421,7 +3421,7 @@ Opomba: Postavitev je izražena glede na lasten prostor predmeta, ki se pripenja
Selecting...
- Izbiranje ...
+ Izbiranje ...
@@ -4691,7 +4691,7 @@ velikost dobljene datoteke STEP.
Selecting... (line or arc)
- Izbiranje ... (daljica ali lok)
+ Izbiranje ... (daljica ali lok)
@@ -5436,7 +5436,7 @@ predmeta, ki se pripenja.
Selecting...
- Izbiranje ...
+ Izbiranje ...
@@ -5667,7 +5667,7 @@ Posamezne OLV preverbe:
Check is running...
- Preverjanje poteka ...
+ Preverjanje poteka ...
diff --git a/src/Mod/Part/Gui/Resources/translations/Part_uk.qm b/src/Mod/Part/Gui/Resources/translations/Part_uk.qm
index 0e0d603aa3..d7a87d8d3f 100644
Binary files a/src/Mod/Part/Gui/Resources/translations/Part_uk.qm and b/src/Mod/Part/Gui/Resources/translations/Part_uk.qm differ
diff --git a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts
index 7640c85605..a31d5e2f9b 100644
--- a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts
+++ b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts
@@ -4800,7 +4800,7 @@ the size of the resulting STEP file.
Shape color
- Shape color
+ Колір форми
diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm
index c9975985f6..36463faec7 100644
Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm differ
diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts
index 49f5b3e6e2..d202e9adb5 100644
--- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts
+++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts
@@ -93,7 +93,7 @@
Additive helix
- Hinzuzufügende Wendel
+ + Wendel
@@ -111,7 +111,7 @@
Additive loft
- Zu addierende Ausformung
+ + Ausformung
@@ -647,7 +647,7 @@
Subtractive helix
- Abzuziehende Wendel
+ Wendel
@@ -665,7 +665,7 @@
Subtractive loft
- Abziehbare Ausformung
+ Ausformung
@@ -720,7 +720,7 @@
Create an additive primitive
- Hinzuzufügende Grundkörper
+ Grundkörper hinzufügen
@@ -740,7 +740,7 @@
Additive Cone
- Hinzuzufügender Kegel
+ Kegel
@@ -755,7 +755,7 @@
Additive Prism
- Hinzuzufügendes Prisma
+ + Prisma
@@ -774,7 +774,7 @@
Create a subtractive primitive
- Erzeuge einen abzuziehenden Grundkörper
+ Grundkörper abziehen
@@ -814,7 +814,7 @@
Subtractive Wedge
- Abzuziehender Keil
+ Keil
@@ -4536,12 +4536,12 @@ unter 90: kleinerer Bohrungsradius an der Unterseite
Create an additive feature
- Hinzuzufügende Objekte
+ Objekte hinzufügen
Create a subtractive feature
- Abzuziehende Objekte
+ Objekte abziehen
diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.qm
index 0d45fd29c1..0e67260071 100644
Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.qm differ
diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts
index e39e063c52..9b60189e92 100644
--- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts
+++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts
@@ -65,12 +65,12 @@
Start edge type
- Start edge type
+ საწყისი წიბოს ტიპი
Start edge size
- Start edge size
+ საწყისი წიბოს ზომა
@@ -183,12 +183,12 @@
Create a local coordinate system
- Create a local coordinate system
+ ლოკალური კოორდინატების სისტემის შექნა
Create a new local coordinate system
- Create a new local coordinate system
+ ახალი კოორდინატების სისტემის შექმნა
@@ -417,7 +417,7 @@
Move object after other object
- Move object after other object
+ ობიექტის სხვა ობიექტის შემდეგ გადატანა
@@ -453,7 +453,7 @@
Create MultiTransform
- Create MultiTransform
+ MultiTransform-ის შექმნა
@@ -602,7 +602,7 @@
Create a scaled feature
- Create a scaled feature
+ მასშტაბირების თვისების შექმნა
@@ -774,7 +774,7 @@
Create a subtractive primitive
- Create a subtractive primitive
+ სუბტრაქტული პრიმიტივის შექმნა
@@ -784,7 +784,7 @@
Subtractive Cylinder
- Subtractive Cylinder
+ სუბტრაქტული ცილინდრი
@@ -799,7 +799,7 @@
Subtractive Ellipsoid
- Subtractive Ellipsoid
+ სუბტრაქტული ელიფსოიდი
@@ -883,7 +883,7 @@
Duplicate a PartDesign object
- Duplicate a PartDesign object
+ PartDesign-ის ობიექტის ასლი
@@ -992,7 +992,7 @@
Pressure angle:
- Pressure angle:
+ წნევის კუთხე:
@@ -1181,12 +1181,12 @@ Please select a body from below, or create a new body.
Radius in local z-direction
- Radius in local z-direction
+ რადუსი ლოკალურ z-მიმართულებაში
Radius in local x-direction
- Radius in local x-direction
+ რადუსი ლოკალურ x-მიმართულებაში
@@ -1197,8 +1197,8 @@ Please select a body from below, or create a new body.
Radius in local y-direction
If zero, it is equal to Radius2
- Radius in local y-direction
-If zero, it is equal to Radius2
+ რადუსი ლოკალურ y-მიმართულებაში
+თუ ნულია, გატოლდება Radius2-თან
@@ -1209,12 +1209,12 @@ If zero, it is equal to Radius2
Radius in local xy-plane
- Radius in local xy-plane
+ რადუსი ლოკალურ xy-სიბრტყეში
Radius in local xz-plane
- Radius in local xz-plane
+ რადუსი ლოკალურ xz-სიბრტყეში
@@ -1453,17 +1453,17 @@ If zero, it is equal to Radius2
X min must not be equal to X max!
- X min must not be equal to X max!
+ მინ. X არ უნდა ემთხვეოდეს მაქს. X-ს!
Y min must not be equal to Y max!
- Y min must not be equal to Y max!
+ მინ. Y არ უნდა ემთხვეოდეს მაქს. Y-ს!
Z min must not be equal to Z max!
- Z min must not be equal to Z max!
+ მინ. Z არ უნდა ემთხვეოდეს მაქს. Z-ს!
@@ -1560,7 +1560,7 @@ click again to end selection
At least one item must be kept.
- At least one item must be kept.
+ ერთი ელემენტი მაინც უნდა დარჩეს.
@@ -1687,7 +1687,7 @@ click again to end selection
At least one item must be kept.
- At least one item must be kept.
+ ერთი ელემენტი მაინც უნდა დარჩეს.
@@ -1719,7 +1719,7 @@ click again to end selection
Allow external features
- Allow external features
+ გარე ელემენტების დაშვება
@@ -1769,12 +1769,12 @@ click again to end selection
Belongs to another body
- Belongs to another body
+ ეკუთვნის სხვა სხეულს
Belongs to another part
- Belongs to another part
+ ეკუთვნის სხვა ნაწილს
@@ -1851,7 +1851,7 @@ click again to end selection
At least one item must be kept.
- At least one item must be kept.
+ ერთი ელემენტი მაინც უნდა დარჩეს.
@@ -1991,7 +1991,7 @@ click again to end selection
Counterbore
- Counterbore
+ მოტორსვა
@@ -2283,7 +2283,7 @@ click again to end selection
Add scaled transformation
- Add scaled transformation
+ მასშტაბირებული გარდაქმნის დამატება
@@ -2370,7 +2370,7 @@ the sketch plane's normal vector will be used
x-component of direction vector
- x-component of direction vector
+ მიმართულების ვექტორის X კომპონენტი
@@ -2380,7 +2380,7 @@ the sketch plane's normal vector will be used
y-component of direction vector
- y-component of direction vector
+ მიმართულების ვექტორის Y კომპონენტი
@@ -2390,7 +2390,7 @@ the sketch plane's normal vector will be used
z-component of direction vector
- z-component of direction vector
+ მიმართულების ვექტორის Z კომპონენტი
@@ -2935,7 +2935,7 @@ measured along the specified direction
Revolution parameters
- Revolution parameters
+ ბრუნვის პარამეტრები
@@ -3112,7 +3112,7 @@ click again to end selection
At least one item must be kept.
- At least one item must be kept.
+ ერთი ელემენტი მაინც უნდა დარჩეს.
@@ -3259,7 +3259,7 @@ click again to end selection
Create a subtractive ellipsoid
- Create a subtractive ellipsoid
+ სუბტრაქტული ელიფსოიდის შექმნა
@@ -3269,7 +3269,7 @@ click again to end selection
Create a subtractive prism
- Create a subtractive prism
+ სუბტრაქტული პრიზმის შექმნა
@@ -3300,7 +3300,7 @@ click again to end selection
Select a feature from the list
- Select a feature from the list
+ აირჩიეთ თვისება სიიდან
@@ -3454,7 +3454,7 @@ click again to end selection
Select an edge, face, or body.
- Select an edge, face, or body.
+ აირჩიეთ წიბო, სახე ან სხეული.
@@ -3480,7 +3480,7 @@ click again to end selection
%1 works only on parts.
- %1 works only on parts.
+ %1 მხოლოდ ნაწილებზე მუშაობს.
@@ -3500,7 +3500,7 @@ click again to end selection
Please create a feature first.
- Please create a feature first.
+ გთხოვთ ჯერ თვისებების სია შექმნათ.
@@ -3657,7 +3657,7 @@ This may lead to unexpected results.
Beginning of the body
- Beginning of the body
+ სხეულის დასაწყისი
@@ -4169,7 +4169,7 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi
Counterbore
- Counterbore
+ მოტორსვა
@@ -4364,7 +4364,7 @@ Only available for holes without thread
Tolerance class for threaded holes according to hole profile
- Tolerance class for threaded holes according to hole profile
+ ხვრელის პროფილიდან გამომდინარე კუთხვილიანი ხვრელების გადახრის კლასი
@@ -4412,7 +4412,7 @@ Only available for holes without thread
<b>Hole cut</b>
- <b>Hole cut</b>
+ <b>ნახვრეტის ამოჭრა</b>
@@ -4423,7 +4423,7 @@ Only available for holes without thread
Cut type for screw heads
- Cut type for screw heads
+ ხრახნის თავისთვის ხვრელის ამოჭრის ტიპი
diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.qm
index cd88c476bd..4818158fb4 100644
Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.qm differ
diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts
index cb64837a70..eaa070efd6 100644
--- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts
+++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts
@@ -6,7 +6,7 @@
Involute gear...
- Evolventni zobnik ...
+ Evolventni zobnik ...
@@ -19,7 +19,7 @@
Sprocket...
- Verižnik ...
+ Verižnik ...
@@ -32,7 +32,7 @@
Shaft design wizard...
- Čarovnik za snovanje gredi ...
+ Čarovnik za snovanje gredi ...
@@ -327,7 +327,7 @@
Create a datum line
- Ustvari referenčno črto
+ Ustvari sklicno črto
@@ -1646,7 +1646,7 @@ s ponovnim klikom pa zaključite izbiranje
- select an item to highlight it
- double-click on an item to see the drafts
- izberite predmet, ki ga želite poudariti
-- dvoklinite na predmet, če želite videti osnutke
+- dvoklinite na predmet, če želite videti nagibe
@@ -4559,12 +4559,12 @@ nad 90: v spodnjem delu večji premer luknje
Sprocket...
- Verižnik ...
+ Verižnik ...
Involute gear...
- Evolventni zobnik ...
+ Evolventni zobnik ...
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ca.qm b/src/Mod/Path/Gui/Resources/translations/Path_ca.qm
index 56f69fae3f..8153e57be3 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ca.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ca.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ca.ts b/src/Mod/Path/Gui/Resources/translations/Path_ca.ts
index 88fee2be68..da3ce2dd7e 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_ca.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_ca.ts
@@ -213,6 +213,16 @@
The Z height of the hop
L'alçària Z del salt
+
+
+ Default length of extensions.
+ Llargària per defecte de les extensions.
+
+
+
+ List of features to extend.
+ Llista de les propietats per a estendre.
+
Stop processing
@@ -243,6 +253,111 @@
The output location for the probe data to be written
La ubicació de sortida que s'ha d'escriure per a les dades de la sonda
+
+
+ The base geometry for this operation
+ La geometria base per a aquesta operació
+
+
+
+ Holds the calculated value for the StartDepth
+ Té el valor calculat per a la StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Té el valor calculat per a la FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Manté el diàmetre de l'eina
+
+
+
+ Holds the max Z value of Stock
+ Manté el valor màxim Z de l'estoc
+
+
+
+ Holds the min Z value of Stock
+ Manté el valor mínim Z de l'estoc
+
+
+
+ Make False, to prevent operation from generating code
+ Marqueu «fals», per a evitar l'operació de generació de codi
+
+
+
+ An optional comment for this Operation
+ Un comentari opcional per a aquesta operació
+
+
+
+ User Assigned Label
+ Etiqueta assignada de l'usuari
+
+
+
+ Operations Cycle Time Estimation
+ Estimació del temps del cicle d'operacions
+
+
+
+ Base locations for this operation
+ Posició de base per a aquesta operació
+
+
+
+ Coolant mode for this operation
+ Mode de refrigeració per a aquesta operació
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Profunditat inicial de l'eina: profunditat en Z del primer tall
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Profunditat final de l'eina: valor més baix en Z
+
+
+
+ Incremental Step Down of Tool
+ Pas incremental cap avall de l'eina
+
+
+
+ Maximum material removed on final pass.
+ Màxim de material retirat en el pas final
+
+
+
+ Rapid Safety Height between locations.
+ Alçària de seguretat en avanç ràpid entre ubicacions.
+
+
+
+ The start point of this path
+ El punt d'inici d'aquest camí
+
+
+
+ Lower limit of the turning diameter
+ Límit inferior del diàmetre de gir
+
+
+
+ Upper limit of the turning diameter.
+ Límit superior del diàmetre de gir.
+
+
+
+ Coolant option for this operation
+ Opció de refrigeració per a aquesta operació
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
Nombre de desplaçaments de la fixació
-
-
- Make False, to prevent operation from generating code
- Marqueu «fals», per a evitar l'operació de generació de codi
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
El gcode que s'ha d'inserir
+
+
+ Angle of ramp.
+ Angle de la rampa.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Velocitat d'avanç personalitzada
+
+
+ Width of tags.
+ Amplària de les etiquetes
+
+
+
+ Height of tags.
+ Alçària de les etiquetes
+
+
+
+ Angle of tag plunge and ascent.
+ Angle de l'etiqueta durant la penetració i ascens
+
+
+
+ Radius of the fillet for the tag.
+ Radi d'arredoniment per a l'etiqueta
+
+
+
+ Locations of inserted holding tags
+ Posicions de les etiquetes de subjecció inserides
+
+
+
+ IDs of disabled holding tags
+ ID de les etiquetes de subjecció inhabilitades
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expressió utilitzada per a baixar de les noves operacions.
-
-
- Start pocketing at center or boundary
- Comença a foradar al centre o al límit
-
-
-
- Percent of cutter diameter to step over on each pass
- Avanç en percentatge del diàmetre de l'eina de tall en cada passada
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Desplaçament addicional que s'aplica a l'operació. La direcció és dependent de l'operació.
+
+
+ Start pocketing at center or boundary
+ Comença a foradar al centre o al límit
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Avanç en percentatge del diàmetre de l'eina de tall en cada passada
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Intents per a evitar retraccions innecessàries.
+
+
+ The side of path to insert bones
+ El costat del camí en què s'insereixen els ossos
+
+
+
+ The style of bones
+ L'estil dels ossos
+
+
+
+ Bones that aren't dressed up
+ Ossos que no estan vestits
+
+
+
+ The algorithm to determine the bone length
+ L'algoritme per a determinar la longitud dels ossos
+
+
+
+ Dressup length if Incision == custom
+ Longitud del vestit si incisió == personalitzada
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ Llista de grups de propietats personalitzades
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
L'eina utilitzada per aquest controlador
+
+
+ List of disabled features
+ Llista de característiques desactivades
+
+
+
+ The NC output file for this project
+ El fitxer d'eixida NC per a aquest projecte
+
+
+
+ Select the Post Processor
+ Selecciona el postprocessador
+
+
+
+ Last Time the Job was post-processed
+ L'últim cop que aquesta tasca va ser postprocessada
+
+
+
+ An optional description for this job
+ Una descripció opcional d'aquesta tasca
+
+
+
+ Job Cycle Time Estimation
+ Temps Estimat per al cicle de la tasca
+
+
+
+ Solid object to be used as stock.
+ Objecte sòlid per utilitzar-se d'stock.
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ Divideix la sortida en diversos fitxers de codi gcode
+
+
+
+ If multiple WCS, order the output this way
+ Si hi ha diversos WCS, ordeneu la sortida d'aquesta manera
+
+
+
+ The Work Coordinate Systems for the Job
+ Els sistemes de coordenades de treball (WCS) per a la tasca
+
+
+
+ SetupSheet holding the settings for this job
+ SetupSheet mantenint la configuració per aquest treball
+
+
+
+ The base objects for all operations
+ Els objectes base per a totes les operacions
+
+
+
+ Collection of all tool controllers for the job
+ Col·lecció de tots els controladors d'eina pel treball
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
No s'ha trobat la tasca %s
+
+
+ Illegal arc: Start and end radii not equal
+ Arc il·legal: Els radis d'inici i de final no son iguals
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
Selected tool is not a drill
-
-
- Illegal arc: Start and end radii not equal
- Arc il·legal: Els radis d'inici i de final no son iguals
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
Sentit antihorari
-
-
- List of disabled features
- Llista de característiques desactivades
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Útils
+
+
+ List of disabled features
+ Llista de característiques desactivades
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Crea un camí de desbarba al llarg de les arestes o al voltant de les cares
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Edita l'aspecte d'etiquetes de subjecció
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Tipus d'objecte stock no suportat %s
-
-
-
- Unsupported stock type %s (%d)
- No s'admet el tipus d'stock %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
No un cilindre d'existències!
+
+
+ Unsupported stock object %s
+ Tipus d'objecte stock no suportat %s
+
+
+
+ Unsupported stock type %s (%d)
+ No s'admet el tipus d'stock %s (%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Objecte sòlid per utilitzar-se d'stock.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Divideix la sortida en diversos fitxers de codi gcode
-
-
-
- If multiple WCS, order the output this way
- Si hi ha diversos WCS, ordeneu la sortida d'aquesta manera
-
-
-
- The Work Coordinate Systems for the Job
- Els sistemes de coordenades de treball (WCS) per a la tasca
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Col·lecció de tots els controladors d'eina pel treball
+
+
+ The Work Coordinate Systems for the Job
+ Els sistemes de coordenades de treball (WCS) per a la tasca
+
+
+
+ If multiple WCS, order the output this way
+ Si hi ha diversos WCS, ordeneu la sortida d'aquesta manera
+
+
+
+ Split output into multiple gcode files
+ Divideix la sortida en diversos fitxers de codi gcode
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- La geometria base per a aquesta operació
-
-
-
- Holds the calculated value for the StartDepth
- Té el valor calculat per a la StartDepth
-
-
-
- Holds the calculated value for the FinalDepth
- Té el valor calculat per a la FinalDepth
-
-
-
- Holds the diameter of the tool
- Manté el diàmetre de l'eina
-
-
-
- Holds the max Z value of Stock
- Manté el valor màxim Z de l'estoc
-
-
-
- Holds the min Z value of Stock
- Manté el valor mínim Z de l'estoc
-
-
-
- Make False, to prevent operation from generating code
- Marqueu «fals», per a evitar l'operació de generació de codi
-
-
-
- An optional comment for this Operation
- Un comentari opcional per a aquesta operació
-
-
-
- User Assigned Label
- Etiqueta assignada de l'usuari
-
-
-
- Operations Cycle Time Estimation
- Estimació del temps del cicle d'operacions
-
-
-
- Base locations for this operation
- Posició de base per a aquesta operació
-
-
-
- Coolant mode for this operation
- Mode de refrigeració per a aquesta operació
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Profunditat inicial de l'eina: profunditat en Z del primer tall
-
-
-
- Final Depth of Tool- lowest value in Z
- Profunditat final de l'eina: valor més baix en Z
-
-
-
- Starting Depth internal use only for derived values
- Profunditat inicial d'ús intern, únicament per als valors derivats
-
-
-
- Incremental Step Down of Tool
- Pas incremental cap avall de l'eina
-
-
-
- Maximum material removed on final pass.
- Màxim de material retirat en el pas final
-
-
-
- The height needed to clear clamps and obstructions
- La alçària necessària per a llevar subjeccions i obstruccions
-
-
-
- Rapid Safety Height between locations.
- Alçària de seguretat en avanç ràpid entre ubicacions.
-
-
-
- The start point of this path
- El punt d'inici d'aquest camí
-
-
-
- Make True, if specifying a Start Point
- Marqueu «cert», si s'especifica un punt final
-
-
-
- Lower limit of the turning diameter
- Límit inferior del diàmetre de gir
-
-
-
- Upper limit of the turning diameter.
- Límit superior del diàmetre de gir.
-
-
-
- Coolant option for this operation
- Opció de refrigeració per a aquesta operació
-
Edit
@@ -1668,11 +1785,131 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Pick Start Point
Trieu el punt d'inici
+
+
+ Make False, to prevent operation from generating code
+ Marqueu «fals», per a evitar l'operació de generació de codi
+
+
+
+ The base geometry for this operation
+ La geometria base per a aquesta operació
+
+
+
+ Holds the calculated value for the StartDepth
+ Té el valor calculat per a la StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Té el valor calculat per a la FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Manté el diàmetre de l'eina
+
+
+
+ Holds the max Z value of Stock
+ Manté el valor màxim Z de l'estoc
+
+
+
+ Holds the min Z value of Stock
+ Manté el valor mínim Z de l'estoc
+
+
+
+ An optional comment for this Operation
+ Un comentari opcional per a aquesta operació
+
+
+
+ User Assigned Label
+ Etiqueta assignada de l'usuari
+
+
+
+ Base locations for this operation
+ Posició de base per a aquesta operació
+
+
+
+ Coolant mode for this operation
+ Mode de refrigeració per a aquesta operació
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Profunditat inicial de l'eina: profunditat en Z del primer tall
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Profunditat final de l'eina: valor més baix en Z
+
+
+
+ Starting Depth internal use only for derived values
+ Profunditat inicial d'ús intern, únicament per als valors derivats
+
+
+
+ Incremental Step Down of Tool
+ Pas incremental cap avall de l'eina
+
+
+
+ Maximum material removed on final pass.
+ Màxim de material retirat en el pas final
+
+
+
+ The height needed to clear clamps and obstructions
+ La alçària necessària per a llevar subjeccions i obstruccions
+
+
+
+ Rapid Safety Height between locations.
+ Alçària de seguretat en avanç ràpid entre ubicacions.
+
+
+
+ The start point of this path
+ El punt d'inici d'aquest camí
+
+
+
+ Make True, if specifying a Start Point
+ Marqueu «cert», si s'especifica un punt final
+
+
+
+ Lower limit of the turning diameter
+ Límit inferior del diàmetre de gir
+
+
+
+ Upper limit of the turning diameter.
+ Límit superior del diàmetre de gir.
+
+
+
+ Coolant option for this operation
+ Opció de refrigeració per a aquesta operació
+
Job Cycle Time Estimation
Temps Estimat per al cicle de la tasca
+
+
+ Operations Cycle Time Estimation
+ Estimació del temps del cicle d'operacions
+
PathPlane
@@ -1735,29 +1972,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Profunditat final establerta per davall de ZMin de la cara o cares seleccionades.
-
- PathPocketShape
-
-
- Default length of extensions.
- Llargària per defecte de les extensions.
-
-
-
- List of features to extend.
- Llista de les propietats per a estendre.
-
-
-
- When enabled connected extension edges are combined to wires.
- Si està habilitat, les arestes de les extensions connectades es combinen amb els filferros.
-
-
-
- Uses the outline of the base geometry.
- Utilitza el contorn de la geometria de base.
-
-
PathProfile
@@ -1831,34 +2045,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Verifiqueu la Profunditat final per les arestes obertes.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Editar taula de propietats
-
-
-
- Create PropertyBag
- Crear taula de propietats
-
-
-
- PropertyBag
- PropertyBag
-
-
-
- Creates an object which can be used to store reference properties.
- Crea un objecte que pot ser utilitzat per desar propietats de referència.
-
-
-
- List of custom property groups
- Llista de grups de propietats personalitzades
-
-
PathSlot
@@ -2883,59 +3069,69 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Angle of ramp.
Angle de la rampa.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Hèlix
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Personalitzat
+
RampEntry Dress-up
Aspecte d'EntradaRampa
+
+
+ Please select one path object
+ Si us plau, seleccioneu un objecte de tipus camí
+
+
+
+ The selected object is not a path
+ L'objecte seleccionat no és un camí
+
+
+
+ Please select a Profile object
+ Seleccioneu un objecte perfil
+
Path_DressupTag
-
-
- The base path to modify
- El camí de base que es modifica
-
-
-
- Width of tags.
- Amplària de les etiquetes
-
-
-
- Height of tags.
- Alçària de les etiquetes
-
-
-
- Angle of tag plunge and ascent.
- Angle de l'etiqueta durant la penetració i ascens
-
-
-
- Radius of the fillet for the tag.
- Radi d'arredoniment per a l'etiqueta
-
-
-
- Locations of inserted holding tags
- Posicions de les etiquetes de subjecció inserides
-
-
-
- IDs of disabled holding tags
- ID de les etiquetes de subjecció inhabilitades
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Factor que determina els # de segments utilitzats per a aproximar etiquetes arrodonides.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- No es poden inserir etiquetes de subjecció per a aquest camí; seleccioneu un perfil de camí
-
The selected object is not a path
@@ -2981,6 +3177,46 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Create Tag Dress-up
Crea un aspecte d'etiqueta
+
+
+ The base path to modify
+ El camí de base que es modifica
+
+
+
+ Width of tags.
+ Amplària de les etiquetes
+
+
+
+ Height of tags.
+ Alçària de les etiquetes
+
+
+
+ Angle of tag plunge and ascent.
+ Angle de l'etiqueta durant la penetració i ascens
+
+
+
+ Radius of the fillet for the tag.
+ Radi d'arredoniment per a l'etiqueta
+
+
+
+ Locations of inserted holding tags
+ Posicions de les etiquetes de subjecció inserides
+
+
+
+ IDs of disabled holding tags
+ ID de les etiquetes de subjecció inhabilitades
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Factor que determina els # de segments utilitzats per a aproximar etiquetes arrodonides.
+
No Base object found.
@@ -3001,6 +3237,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Base Path is empty.
El camí base és buit.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ No es poden inserir etiquetes de subjecció per a aquest camí; seleccioneu un perfil de camí
+
Path_DressupZCorrect
@@ -3094,6 +3335,19 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Operacions de gravat
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Exporta la plantilla
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Exporta la tasca de camí com a plantilla per a utilitzar-la en altres tasques
+
+
Path_Helix
@@ -3190,6 +3444,16 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Exports Path Job as a template to be used for other jobs
Exporta la tasca de camí com a plantilla per a utilitzar-la en altres tasques
+
+
+ Edit
+ Edita
+
+
+
+ Stock not a cylinder!
+ No un cilindre d'existències!
+
Edit Job
@@ -3210,6 +3474,16 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
All Files (*.*)
Tots els arxius (*.*)
+
+
+ Unsupported stock object %s
+ Tipus d'objecte stock no suportat %s
+
+
+
+ Unsupported stock type %s (%d)
+ No s'admet el tipus d'stock %s (%d)
+
Model Selection
@@ -3220,6 +3494,71 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Create Job
Crea una tasca
+
+
+ Fixture
+ Fixació
+
+
+
+ Tool
+ Eina
+
+
+
+ Operation
+ Operació
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Sólids
+
+
+
+ Jobs
+ Treballs
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Caixa: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Cilindre: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Tipus d'existència no admès
+
Path_MillFace
@@ -3242,6 +3581,24 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Commuta l'estat actiu de l'operació
+
+ Path_Operation
+
+
+ None
+ Cap
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3451,6 +3808,14 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Perfila el model sencer, les cares seleccionades o bé les arestes seleccionades
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
@@ -3761,6 +4126,136 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Personalitzat
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Línia
+
+
+
+ Offset
+ Equidistancia (ofset)
+
+
+
+ Spiral
+ Espiral
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ None
+ Cap
+
+
+
+ Only
+ Only
+
+
+
+ First
+ Primer
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Planes
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -4013,6 +4508,183 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Creeu una operació de línia de navegació a partir d'un model
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ Aquesta operació requereix que l'OpenCamLib estiga instal·lat.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Personalitzat
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Línia
+
+
+
+ Offset
+ Equidistancia (ofset)
+
+
+
+ Spiral
+ Espiral
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ None
+ Cap
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Edita l'aspecte d'etiquetes de subjecció
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Llargària per defecte de les extensions.
+
+
+
+ List of features to extend.
+ Llista de les propietats per a estendre.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ Si està habilitat, les arestes de les extensions connectades es combinen amb els filferros.
+
+
+
+ Uses the outline of the base geometry.
+ Utilitza el contorn de la geometria de base.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Editar taula de propietats
+
+
+
+ Create PropertyBag
+ Crear taula de propietats
+
+
+
+ PropertyBag
+ PropertyBag
+
+
+
+ Creates an object which can be used to store reference properties.
+ Crea un objecte que pot ser utilitzat per desar propietats de referència.
+
+
+
+ List of custom property groups
+ Llista de grups de propietats personalitzades
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_cs.qm b/src/Mod/Path/Gui/Resources/translations/Path_cs.qm
index cc3e19efe3..66e15305d3 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_cs.qm and b/src/Mod/Path/Gui/Resources/translations/Path_cs.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_cs.ts b/src/Mod/Path/Gui/Resources/translations/Path_cs.ts
index abbef6d039..b81c145f8a 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_cs.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_cs.ts
@@ -213,6 +213,16 @@
The Z height of the hop
The Z height of the hop
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
Stop processing
@@ -243,6 +253,111 @@
The output location for the probe data to be written
The output location for the probe data to be written
+
+
+ The base geometry for this operation
+ The base geometry for this operation
+
+
+
+ Holds the calculated value for the StartDepth
+ Holds the calculated value for the StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Holds the calculated value for the FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Uchová průměr nástroje
+
+
+
+ Holds the max Z value of Stock
+ Převezme maximální Z hodnotu polotovaru
+
+
+
+ Holds the min Z value of Stock
+ Převezme minimální Z hodnotu polotovaru
+
+
+
+ Make False, to prevent operation from generating code
+ Natavte Nepravdu, aby operace negenerovala kód
+
+
+
+ An optional comment for this Operation
+ An optional comment for this Operation
+
+
+
+ User Assigned Label
+ User Assigned Label
+
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
+
+
+ Base locations for this operation
+ Base locations for this operation
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Starting Depth of Tool- first cut depth in Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Final Depth of Tool- lowest value in Z
+
+
+
+ Incremental Step Down of Tool
+ Incremental Step Down of Tool
+
+
+
+ Maximum material removed on final pass.
+ Maximum material removed on final pass.
+
+
+
+ Rapid Safety Height between locations.
+ Rapid Safety Height between locations.
+
+
+
+ The start point of this path
+ The start point of this path
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
Fixture Offset Number
-
-
- Make False, to prevent operation from generating code
- Natavte Nepravdu, aby operace negenerovala kód
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
The gcode to be inserted
+
+
+ Angle of ramp.
+ Angle of ramp.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Vlastní posuv
+
+
+ Width of tags.
+ Width of tags.
+
+
+
+ Height of tags.
+ Height of tags.
+
+
+
+ Angle of tag plunge and ascent.
+ Angle of tag plunge and ascent.
+
+
+
+ Radius of the fillet for the tag.
+ Radius of the fillet for the tag.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expression used for StepDown of new operations.
-
-
- Start pocketing at center or boundary
- Start pocketing at center or boundary
-
-
-
- Percent of cutter diameter to step over on each pass
- Percent of cutter diameter to step over on each pass
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Extra offset to apply to the operation. Direction is operation dependent.
+
+
+ Start pocketing at center or boundary
+ Start pocketing at center or boundary
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Percent of cutter diameter to step over on each pass
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Attempts to avoid unnecessary retractions.
+
+
+ The side of path to insert bones
+ The side of path to insert bones
+
+
+
+ The style of bones
+ The style of bones
+
+
+
+ Bones that aren't dressed up
+ Bones that aren't dressed up
+
+
+
+ The algorithm to determine the bone length
+ The algorithm to determine the bone length
+
+
+
+ Dressup length if Incision == custom
+ Dressup length if Incision == custom
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ List of custom property groups
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
The tool used by this controller
+
+
+ List of disabled features
+ Seznam zakázaných funkcí
+
+
+
+ The NC output file for this project
+ Výstupní NC soubor pro tento projekt
+
+
+
+ Select the Post Processor
+ Select the Post Processor
+
+
+
+ Last Time the Job was post-processed
+ Last Time the Job was post-processed
+
+
+
+ An optional description for this job
+ An optional description for this job
+
+
+
+ Job Cycle Time Estimation
+ Job Cycle Time Estimation
+
+
+
+ Solid object to be used as stock.
+ Těleso bude použitý jako polotovar.
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ SetupSheet holding the settings for this job
+ SetupSheet holding the settings for this job
+
+
+
+ The base objects for all operations
+ The base objects for all operations
+
+
+
+ Collection of all tool controllers for the job
+ Collection of all tool controllers for the job
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
Didn't find job %s
+
+
+ Illegal arc: Start and end radii not equal
+ Illegal arc: Start and end radii not equal
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
Vybraný nástroj není vrták
-
-
- Illegal arc: Start and end radii not equal
- Illegal arc: Start and end radii not equal
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
Levotočivý
-
-
- List of disabled features
- Seznam zakázaných funkcí
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utils
+
+
+ List of disabled features
+ Seznam zakázaných funkcí
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Creates a Deburr Path along Edges or around Faces
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Edit HoldingTags Dress-up
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Nepodporovaný objekt polotovaru %s
-
-
-
- Unsupported stock type %s (%d)
- Nepodporovaný typ polotovaru %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
Polotovar není válec!
+
+
+ Unsupported stock object %s
+ Nepodporovaný objekt polotovaru %s
+
+
+
+ Unsupported stock type %s (%d)
+ Nepodporovaný typ polotovaru %s (%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Těleso bude použitý jako polotovar.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Split output into multiple gcode files
-
-
-
- If multiple WCS, order the output this way
- If multiple WCS, order the output this way
-
-
-
- The Work Coordinate Systems for the Job
- The Work Coordinate Systems for the Job
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Collection of all tool controllers for the job
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- The base geometry for this operation
-
-
-
- Holds the calculated value for the StartDepth
- Holds the calculated value for the StartDepth
-
-
-
- Holds the calculated value for the FinalDepth
- Holds the calculated value for the FinalDepth
-
-
-
- Holds the diameter of the tool
- Uchová průměr nástroje
-
-
-
- Holds the max Z value of Stock
- Převezme maximální Z hodnotu polotovaru
-
-
-
- Holds the min Z value of Stock
- Převezme minimální Z hodnotu polotovaru
-
-
-
- Make False, to prevent operation from generating code
- Natavte Nepravdu, aby operace negenerovala kód
-
-
-
- An optional comment for this Operation
- An optional comment for this Operation
-
-
-
- User Assigned Label
- User Assigned Label
-
-
-
- Operations Cycle Time Estimation
- Operations Cycle Time Estimation
-
-
-
- Base locations for this operation
- Base locations for this operation
-
-
-
- Coolant mode for this operation
- Coolant mode for this operation
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Starting Depth of Tool- first cut depth in Z
-
-
-
- Final Depth of Tool- lowest value in Z
- Final Depth of Tool- lowest value in Z
-
-
-
- Starting Depth internal use only for derived values
- Starting Depth internal use only for derived values
-
-
-
- Incremental Step Down of Tool
- Incremental Step Down of Tool
-
-
-
- Maximum material removed on final pass.
- Maximum material removed on final pass.
-
-
-
- The height needed to clear clamps and obstructions
- Výška potřebná k odstranění svorek a překážek
-
-
-
- Rapid Safety Height between locations.
- Rapid Safety Height between locations.
-
-
-
- The start point of this path
- The start point of this path
-
-
-
- Make True, if specifying a Start Point
- Make True, if specifying a Start Point
-
-
-
- Lower limit of the turning diameter
- Lower limit of the turning diameter
-
-
-
- Upper limit of the turning diameter.
- Upper limit of the turning diameter.
-
-
-
- Coolant option for this operation
- Coolant option for this operation
-
Edit
@@ -1668,11 +1785,131 @@ If it is necessary to set the FinalDepth manually please select a different oper
Pick Start Point
Pick Start Point
+
+
+ Make False, to prevent operation from generating code
+ Natavte Nepravdu, aby operace negenerovala kód
+
+
+
+ The base geometry for this operation
+ The base geometry for this operation
+
+
+
+ Holds the calculated value for the StartDepth
+ Holds the calculated value for the StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Holds the calculated value for the FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Uchová průměr nástroje
+
+
+
+ Holds the max Z value of Stock
+ Převezme maximální Z hodnotu polotovaru
+
+
+
+ Holds the min Z value of Stock
+ Převezme minimální Z hodnotu polotovaru
+
+
+
+ An optional comment for this Operation
+ An optional comment for this Operation
+
+
+
+ User Assigned Label
+ User Assigned Label
+
+
+
+ Base locations for this operation
+ Base locations for this operation
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Starting Depth of Tool- first cut depth in Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Final Depth of Tool- lowest value in Z
+
+
+
+ Starting Depth internal use only for derived values
+ Starting Depth internal use only for derived values
+
+
+
+ Incremental Step Down of Tool
+ Incremental Step Down of Tool
+
+
+
+ Maximum material removed on final pass.
+ Maximum material removed on final pass.
+
+
+
+ The height needed to clear clamps and obstructions
+ Výška potřebná k odstranění svorek a překážek
+
+
+
+ Rapid Safety Height between locations.
+ Rapid Safety Height between locations.
+
+
+
+ The start point of this path
+ The start point of this path
+
+
+
+ Make True, if specifying a Start Point
+ Make True, if specifying a Start Point
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Job Cycle Time Estimation
Job Cycle Time Estimation
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
PathPlane
@@ -1735,29 +1972,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Final depth set below ZMin of face(s) selected.
-
- PathPocketShape
-
-
- Default length of extensions.
- Default length of extensions.
-
-
-
- List of features to extend.
- List of features to extend.
-
-
-
- When enabled connected extension edges are combined to wires.
- When enabled connected extension edges are combined to wires.
-
-
-
- Uses the outline of the base geometry.
- Uses the outline of the base geometry.
-
-
PathProfile
@@ -1831,34 +2045,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
For open edges, verify Final Depth for this operation.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Edit PropertyBag
-
-
-
- Create PropertyBag
- Create PropertyBag
-
-
-
- PropertyBag
- PropertyBag
-
-
-
- Creates an object which can be used to store reference properties.
- Creates an object which can be used to store reference properties.
-
-
-
- List of custom property groups
- List of custom property groups
-
-
PathSlot
@@ -2885,59 +3071,69 @@ If it is necessary to set the FinalDepth manually please select a different oper
Angle of ramp.
Angle of ramp.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Spirála
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Vlastní
+
RampEntry Dress-up
RampEntry Dress-up
+
+
+ Please select one path object
+ Please select one path object
+
+
+
+ The selected object is not a path
+ The selected object is not a path
+
+
+
+ Please select a Profile object
+ Please select a Profile object
+
Path_DressupTag
-
-
- The base path to modify
- The base path to modify
-
-
-
- Width of tags.
- Width of tags.
-
-
-
- Height of tags.
- Height of tags.
-
-
-
- Angle of tag plunge and ascent.
- Angle of tag plunge and ascent.
-
-
-
- Radius of the fillet for the tag.
- Radius of the fillet for the tag.
-
-
-
- Locations of inserted holding tags
- Locations of inserted holding tags
-
-
-
- IDs of disabled holding tags
- IDs of disabled holding tags
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Factor determining the # of segments used to approximate rounded tags.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Cannot insert holding tags for this path - please select a Profile path
-
The selected object is not a path
@@ -2983,6 +3179,46 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Tag Dress-up
Create Tag Dress-up
+
+
+ The base path to modify
+ The base path to modify
+
+
+
+ Width of tags.
+ Width of tags.
+
+
+
+ Height of tags.
+ Height of tags.
+
+
+
+ Angle of tag plunge and ascent.
+ Angle of tag plunge and ascent.
+
+
+
+ Radius of the fillet for the tag.
+ Radius of the fillet for the tag.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Factor determining the # of segments used to approximate rounded tags.
+
No Base object found.
@@ -3003,6 +3239,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Base Path is empty.
Base Path is empty.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Cannot insert holding tags for this path - please select a Profile path
+
Path_DressupZCorrect
@@ -3096,6 +3337,19 @@ If it is necessary to set the FinalDepth manually please select a different oper
Operace obrábění po křivce
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Export Template
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Exports Path Job as a template to be used for other jobs
+
+
Path_Helix
@@ -3192,6 +3446,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
Exports Path Job as a template to be used for other jobs
Exports Path Job as a template to be used for other jobs
+
+
+ Edit
+ Upravit
+
+
+
+ Stock not a cylinder!
+ Polotovar není válec!
+
Edit Job
@@ -3212,6 +3476,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
All Files (*.*)
Všechny soubory (*.*)
+
+
+ Unsupported stock object %s
+ Nepodporovaný objekt polotovaru %s
+
+
+
+ Unsupported stock type %s (%d)
+ Nepodporovaný typ polotovaru %s (%d)
+
Model Selection
@@ -3222,6 +3496,71 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Job
Create Job
+
+
+ Fixture
+ Fixture
+
+
+
+ Tool
+ Nástroj
+
+
+
+ Operation
+ Operace
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Tělesa
+
+
+
+ Jobs
+ Úlohy
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Kvádr: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Válec: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Nepodporovaný typ polotovaru
+
Path_MillFace
@@ -3244,6 +3583,24 @@ If it is necessary to set the FinalDepth manually please select a different oper
Toggle the Active State of the Operation
+
+ Path_Operation
+
+
+ None
+ Žádný
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3453,6 +3810,14 @@ If it is necessary to set the FinalDepth manually please select a different oper
Profile entire model, selected face(s) or selected edge(s)
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
@@ -3763,6 +4128,136 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Vlastní
+
+
+
+ Conventional
+ nesousledně
+
+
+
+ Climb
+ sousledně
+
+
+
+ Circular
+ Kruhový
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Čára
+
+
+
+ Offset
+ Odstup
+
+
+
+ Spiral
+ Spirála
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ None
+ Žádný
+
+
+
+ Only
+ Only
+
+
+
+ First
+ První
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Rovinný
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -4015,6 +4510,183 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create a Waterline Operation from a model
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ This operation requires OpenCamLib to be installed.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Vlastní
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Kruhový
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Čára
+
+
+
+ Offset
+ Odstup
+
+
+
+ Spiral
+ Spirála
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ nesousledně
+
+
+
+ Climb
+ sousledně
+
+
+
+ None
+ Žádný
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Edit HoldingTags Dress-up
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ When enabled connected extension edges are combined to wires.
+
+
+
+ Uses the outline of the base geometry.
+ Uses the outline of the base geometry.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Edit PropertyBag
+
+
+
+ Create PropertyBag
+ Create PropertyBag
+
+
+
+ PropertyBag
+ PropertyBag
+
+
+
+ Creates an object which can be used to store reference properties.
+ Creates an object which can be used to store reference properties.
+
+
+
+ List of custom property groups
+ List of custom property groups
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_de.qm b/src/Mod/Path/Gui/Resources/translations/Path_de.qm
index a5db35089d..a8a5bc7d1d 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_de.qm and b/src/Mod/Path/Gui/Resources/translations/Path_de.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_de.ts b/src/Mod/Path/Gui/Resources/translations/Path_de.ts
index 83b6243f83..a5b6e5acbb 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_de.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_de.ts
@@ -215,10 +215,20 @@ nur unwesentlich.
The Z height of the hop
Die Z-Höhe des Sprungs
+
+
+ Default length of extensions.
+ Standardlänge der Verlängerung/Erweiterungen.
+
+
+
+ List of features to extend.
+ Liste der zu erweiternden Merkmale.
+
Stop processing
- Stop processing
+ Bearbeitung stoppen
@@ -245,6 +255,111 @@ nur unwesentlich.
The output location for the probe data to be written
Der Ausgabeort für die zu schreibenden Sondendaten
+
+
+ The base geometry for this operation
+ Die Basis-Geometrie für diese Operation
+
+
+
+ Holds the calculated value for the StartDepth
+ Enthält den berechneten Wert für die Starttiefe ("StartDepth")
+
+
+
+ Holds the calculated value for the FinalDepth
+ Enthält den berechneten Wert für die Endtiefe ("FinalDepth")
+
+
+
+ Holds the diameter of the tool
+ Enthält den Durchmesser des Werkzeugs
+
+
+
+ Holds the max Z value of Stock
+ Enthält den maximalen Z-Wert des Materialkörpers
+
+
+
+ Holds the min Z value of Stock
+ Enthält den minimalen Z-Wert des Materialkörpers
+
+
+
+ Make False, to prevent operation from generating code
+ Abwählen, damit die Aktion keinen Code generiert
+
+
+
+ An optional comment for this Operation
+ Ein optionaler Kommentar für diese Operation
+
+
+
+ User Assigned Label
+ Vom Benutzer vergebenes Label
+
+
+
+ Operations Cycle Time Estimation
+ Abschätzung der Durchlaufzeit
+
+
+
+ Base locations for this operation
+ Ausgangspunkte für diese Operation
+
+
+
+ Coolant mode for this operation
+ Kühlmittelmodus für diese Operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Starttiefe des Werkzeugs - erste Frästiefe in Z-Richtung
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Endgültige Tiefe des Werkzeugs - niedrigster Wert in Z-Richtung
+
+
+
+ Incremental Step Down of Tool
+ Inkrementeller Abwärtsschritt des Werkzeugs
+
+
+
+ Maximum material removed on final pass.
+ Maximal zu entfernendes Material im letzten Arbeitsschritt.
+
+
+
+ Rapid Safety Height between locations.
+ Sicherheitshöhe für Eilfahrten zwischen Positionen.
+
+
+
+ The start point of this path
+ Der Startpunkt dieses Pfades
+
+
+
+ Lower limit of the turning diameter
+ Untere Grenze des Drehdurchmessers
+
+
+
+ Upper limit of the turning diameter.
+ Obere Grenze des Drehdurchmessers.
+
+
+
+ Coolant option for this operation
+ Kühlmitteloption für diese Operation
+
Additional base objects to be engraved
@@ -258,7 +373,7 @@ nur unwesentlich.
Vcarve Tolerance
- Vcarve Tolerance
+ Vcarve-Toleranz
@@ -298,12 +413,12 @@ nur unwesentlich.
The Style of motion into the Path
- The Style of motion into the Path
+ Der Bewegungsstil in den Pfad
The Style of motion out of the Path
- The Style of motion out of the Path
+ Der Bewegungsstil aus dem Pfad
@@ -335,11 +450,6 @@ nur unwesentlich.
Fixture Offset Number
Abstand von der Einspannung
-
-
- Make False, to prevent operation from generating code
- Abwählen, damit die Aktion keinen Code generiert
-
Shape for bit shape
@@ -370,6 +480,11 @@ nur unwesentlich.
The gcode to be inserted
Einzufügender G-Code
+
+
+ Angle of ramp.
+ Winkel der Rampe.
+
Ramping Method
@@ -385,6 +500,36 @@ nur unwesentlich.
Custom feed rate
Benutzerdefinierte Vorschubgeschwindigkeit
+
+
+ Width of tags.
+ Breite des Haltesteges.
+
+
+
+ Height of tags.
+ Höhe des Haltesteges.
+
+
+
+ Angle of tag plunge and ascent.
+ Winkel der Ein- und Ausfahrt bei Haltestegen.
+
+
+
+ Radius of the fillet for the tag.
+ Radius der Rundung des Haltestegs.
+
+
+
+ Locations of inserted holding tags
+ Positionen der eingefügten Haltestege
+
+
+
+ IDs of disabled holding tags
+ IDs von deaktivierten Haltestegen
+
Incremental Drill depth before retracting to clear chips
@@ -570,16 +715,6 @@ nur unwesentlich.
Expression used for StepDown of new operations.
Ausdruck für die Stufenhöhe (StepDown) von neuen Operationen.
-
-
- Start pocketing at center or boundary
- Taschenfräsen im Mittelpunkt oder am Rand der Tasche starten
-
-
-
- Percent of cutter diameter to step over on each pass
- Pfadüberlappung als Prozentsatz des Werkzeugdurchmessers
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -590,6 +725,16 @@ nur unwesentlich.
Extra offset to apply to the operation. Direction is operation dependent.
Zusätzlicher Versatz, der zur Operation hinzugefügt wird. Richtung ist abhängig von der Operation.
+
+
+ Start pocketing at center or boundary
+ Taschenfräsen im Mittelpunkt oder am Rand der Tasche starten
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Pfadüberlappung als Prozentsatz des Werkzeugdurchmessers
+
Angle of the zigzag pattern
@@ -610,6 +755,31 @@ nur unwesentlich.
Attempts to avoid unnecessary retractions.
Nach Möglichkeit unnötige Rückzüge vermeiden.
+
+
+ The side of path to insert bones
+ Die Seite des Pfads, auf dem Knochen eingefügt werden sollen
+
+
+
+ The style of bones
+ Die Form der Knochen
+
+
+
+ Bones that aren't dressed up
+ Knchen die nicht erweitert wurden
+
+
+
+ The algorithm to determine the bone length
+ Der Algorithmus zur Bestimmung der Knochen-Länge
+
+
+
+ Dressup length if Incision == custom
+ "Dressup" Länge wenn der Schnitt == benutzerdefiniert
+
Add Optional or Mandatory Stop to the program
@@ -678,7 +848,12 @@ nur unwesentlich.
Seed value for jitter randomness
- Seed value for jitter randomness
+ Seed Wert für Jitter Zufall
+
+
+
+ List of custom property groups
+ Liste benutzerdefinierter Eigenschaftsgruppen
@@ -808,7 +983,7 @@ nur unwesentlich.
Split Arcs into discrete segments
- Split Arcs into discrete segments
+ Bögen in einzelne Segmente aufteilen
@@ -850,6 +1025,76 @@ nur unwesentlich.
The tool used by this controller
Das von dieser Steuerung genutzte Werkzeug
+
+
+ List of disabled features
+ Liste der deaktivierten Merkmale
+
+
+
+ The NC output file for this project
+ Die NC-Ausgabedatei für dieses Projekt
+
+
+
+ Select the Post Processor
+ Wählen Sie den Postprozessor aus
+
+
+
+ Last Time the Job was post-processed
+ Letzte Nachbearbeitung des Auftrags
+
+
+
+ An optional description for this job
+ Optionale Beschreibung für diesen Auftrag
+
+
+
+ Job Cycle Time Estimation
+ Abschätzung des Durchlaufzeit des Auftrags
+
+
+
+ Solid object to be used as stock.
+ Festkörperobjekt (Solid), der als Materialkörper verwendet werden soll.
+
+
+
+ Select the Type of Job
+ Wählen Sie die Art der Aufgabe
+
+
+
+ Split output into multiple gcode files
+ Ausgabe auf mehrere G-Code Dateien aufteilen
+
+
+
+ If multiple WCS, order the output this way
+ Wenn mehrere WCS vorhanden sind, ordnen Sie die Ausgabe auf diese Weise
+
+
+
+ The Work Coordinate Systems for the Job
+ Das Arbeitskoordinatensystem für den Auftrag
+
+
+
+ SetupSheet holding the settings for this job
+ Einrichtungstabelle mit Einstellungen für diesen Auftrag
+
+
+
+ The base objects for all operations
+ Das Basisobjekt für alle Operationen
+
+
+
+ Collection of all tool controllers for the job
+ Sammlung aller Werkzeugsteuerungen für den Auftrag
+
Start cutting from the inside or outside
@@ -943,6 +1188,11 @@ nur unwesentlich.
Didn't find job %s
Auftrag %s nicht gefunden
+
+
+ Illegal arc: Start and end radii not equal
+ Ungültiger Bogen: Start- und Endradius sind nicht gleich
+
Legacy Tools not supported
@@ -953,11 +1203,6 @@ nur unwesentlich.
Selected tool is not a drill
Ausgewähltes Werkzeug ist kein Bohrer
-
-
- Illegal arc: Start and end radii not equal
- Ungültiger Bogen: Start- und Endradius sind nicht gleich
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1038,11 +1283,6 @@ nur unwesentlich.
CCW
Gegen den Uhrzeigersinn
-
-
- List of disabled features
- Liste der deaktivierten Merkmale
-
Project Setup
@@ -1103,6 +1343,11 @@ nur unwesentlich.
Utils
Werkzeuge
+
+
+ List of disabled features
+ Liste der deaktivierten Merkmale
+
Choose a writable location for your toolbits
@@ -1243,14 +1488,6 @@ nur unwesentlich.
Erstellt einen Entgrat-Pfad entlang von Kante oder um Flächen herum
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Haltestege Erweiterung bearbeiten
-
-
PathFeatureExtensions
@@ -1340,16 +1577,6 @@ nur unwesentlich.
PathJob
-
-
- Unsupported stock object %s
- Nicht unterstütztes Materialkörper-Objekt %s
-
-
-
- Unsupported stock type %s (%d)
- Nicht unterstützter Materialkörpertyp %s (%d)
-
Stock not from Base bound box!
@@ -1365,6 +1592,16 @@ nur unwesentlich.
Stock not a cylinder!
Materialkörper ist kein Zylinder!
+
+
+ Unsupported stock object %s
+ Nicht unterstütztes Materialkörper-Objekt %s
+
+
+
+ Unsupported stock type %s (%d)
+ Nicht unterstützter Materialkörpertyp %s (%d)
+
The NC output file for this project
@@ -1395,26 +1632,6 @@ nur unwesentlich.
Solid object to be used as stock.
Festkörperobjekt (Solid), der als Materialkörper verwendet werden soll.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Ausgabe auf mehrere G-Code Dateien aufteilen
-
-
-
- If multiple WCS, order the output this way
- Wenn mehrere WCS vorhanden sind, ordnen Sie die Ausgabe auf diese Weise
-
-
-
- The Work Coordinate Systems for the Job
- Das Arbeitskoordinatensystem für den Auftrag
-
SetupSheet holding the settings for this job
@@ -1430,6 +1647,26 @@ nur unwesentlich.
Collection of all tool controllers for the job
Sammlung aller Werkzeugsteuerungen für den Auftrag
+
+
+ The Work Coordinate Systems for the Job
+ Das Arbeitskoordinatensystem für den Auftrag
+
+
+
+ If multiple WCS, order the output this way
+ Wenn mehrere WCS vorhanden sind, ordnen Sie die Ausgabe auf diese Weise
+
+
+
+ Split output into multiple gcode files
+ Ausgabe auf mehrere G-Code Dateien aufteilen
+
+
+
+ Select the Type of Job
+ Wählen Sie die Art der Aufgabe
+
Unsupported PathJob template version %s
@@ -1473,126 +1710,6 @@ nur unwesentlich.
PathOp
-
-
- The base geometry for this operation
- Die Basis-Geometrie für diese Operation
-
-
-
- Holds the calculated value for the StartDepth
- Enthält den berechneten Wert für die Starttiefe ("StartDepth")
-
-
-
- Holds the calculated value for the FinalDepth
- Enthält den berechneten Wert für die Endtiefe ("FinalDepth")
-
-
-
- Holds the diameter of the tool
- Enthält den Durchmesser des Werkzeugs
-
-
-
- Holds the max Z value of Stock
- Enthält den maximalen Z-Wert des Materialkörpers
-
-
-
- Holds the min Z value of Stock
- Enthält den minimalen Z-Wert des Materialkörpers
-
-
-
- Make False, to prevent operation from generating code
- Abwählen, damit die Aktion keinen Code generiert
-
-
-
- An optional comment for this Operation
- Ein optionaler Kommentar für diese Operation
-
-
-
- User Assigned Label
- Vom Benutzer vergebenes Label
-
-
-
- Operations Cycle Time Estimation
- Abschätzung der Durchlaufzeit
-
-
-
- Base locations for this operation
- Ausgangspunkte für diese Operation
-
-
-
- Coolant mode for this operation
- Kühlmittelmodus für diese Operation
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Starttiefe des Werkzeugs - erste Frästiefe in Z-Richtung
-
-
-
- Final Depth of Tool- lowest value in Z
- Endgültige Tiefe des Werkzeugs - niedrigster Wert in Z-Richtung
-
-
-
- Starting Depth internal use only for derived values
- Starttiefe, interne Verwendung nur für abgeleitete Werte
-
-
-
- Incremental Step Down of Tool
- Inkrementeller Abwärtsschritt des Werkzeugs
-
-
-
- Maximum material removed on final pass.
- Maximal zu entfernendes Material im letzten Arbeitsschritt.
-
-
-
- The height needed to clear clamps and obstructions
- Die erforderliche Höhe, um Spann- und Befestigungsklemmen zu überfahren
-
-
-
- Rapid Safety Height between locations.
- Sicherheitshöhe für Eilfahrten zwischen Positionen.
-
-
-
- The start point of this path
- Der Startpunkt dieses Pfades
-
-
-
- Make True, if specifying a Start Point
- Aktivieren, wenn ein Startpunkt angegeben werden soll
-
-
-
- Lower limit of the turning diameter
- Untere Grenze des Drehdurchmessers
-
-
-
- Upper limit of the turning diameter.
- Obere Grenze des Drehdurchmessers.
-
-
-
- Coolant option for this operation
- Kühlmitteloption für diese Operation
-
Edit
@@ -1670,11 +1787,131 @@ Sollte dies nötig sein, so wählen Sie bitte eine andere Operation aus.Pick Start Point
Startpunkt wählen
+
+
+ Make False, to prevent operation from generating code
+ Abwählen, damit die Aktion keinen Code generiert
+
+
+
+ The base geometry for this operation
+ Die Basis-Geometrie für diese Operation
+
+
+
+ Holds the calculated value for the StartDepth
+ Enthält den berechneten Wert für die Starttiefe ("StartDepth")
+
+
+
+ Holds the calculated value for the FinalDepth
+ Enthält den berechneten Wert für die Endtiefe ("FinalDepth")
+
+
+
+ Holds the diameter of the tool
+ Enthält den Durchmesser des Werkzeugs
+
+
+
+ Holds the max Z value of Stock
+ Enthält den maximalen Z-Wert des Materialkörpers
+
+
+
+ Holds the min Z value of Stock
+ Enthält den minimalen Z-Wert des Materialkörpers
+
+
+
+ An optional comment for this Operation
+ Ein optionaler Kommentar für diese Operation
+
+
+
+ User Assigned Label
+ Vom Benutzer vergebenes Label
+
+
+
+ Base locations for this operation
+ Ausgangspunkte für diese Operation
+
+
+
+ Coolant mode for this operation
+ Kühlmittelmodus für diese Operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Starttiefe des Werkzeugs - erste Frästiefe in Z-Richtung
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Endgültige Tiefe des Werkzeugs - niedrigster Wert in Z-Richtung
+
+
+
+ Starting Depth internal use only for derived values
+ Starttiefe, interne Verwendung nur für abgeleitete Werte
+
+
+
+ Incremental Step Down of Tool
+ Inkrementeller Abwärtsschritt des Werkzeugs
+
+
+
+ Maximum material removed on final pass.
+ Maximal zu entfernendes Material im letzten Arbeitsschritt.
+
+
+
+ The height needed to clear clamps and obstructions
+ Die erforderliche Höhe, um Spann- und Befestigungsklemmen zu überfahren
+
+
+
+ Rapid Safety Height between locations.
+ Sicherheitshöhe für Eilfahrten zwischen Positionen.
+
+
+
+ The start point of this path
+ Der Startpunkt dieses Pfades
+
+
+
+ Make True, if specifying a Start Point
+ Aktivieren, wenn ein Startpunkt angegeben werden soll
+
+
+
+ Lower limit of the turning diameter
+ Untere Grenze des Drehdurchmessers
+
+
+
+ Upper limit of the turning diameter.
+ Obere Grenze des Drehdurchmessers.
+
+
+
+ Coolant option for this operation
+ Kühlmitteloption für diese Operation
+
Job Cycle Time Estimation
Abschätzung des Durchlaufzeit des Auftrags
+
+
+ Operations Cycle Time Estimation
+ Abschätzung der Durchlaufzeit
+
PathPlane
@@ -1737,29 +1974,6 @@ Sollte dies nötig sein, so wählen Sie bitte eine andere Operation aus.Zieltiefe unter ZMin der ausgewählten Fläche(n).
-
- PathPocketShape
-
-
- Default length of extensions.
- Standardlänge der Verlängerung/Erweiterungen.
-
-
-
- List of features to extend.
- Liste der zu erweiternden Merkmale.
-
-
-
- When enabled connected extension edges are combined to wires.
- Falls aktiviert, werden die verbundenen Kanten zu Kanzenzügen vereinigt.
-
-
-
- Uses the outline of the base geometry.
- Benutzt die Kontur der Basisgeometrie.
-
-
PathProfile
@@ -1833,34 +2047,6 @@ Sollte dies nötig sein, so wählen Sie bitte eine andere Operation aus.Überprüfen Sie die endgültige Tiefe dieser Operation für offene Kanten.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Eigenschaftssammlung bearbeiten
-
-
-
- Create PropertyBag
- Eigenschaftssammlung erstellen
-
-
-
- PropertyBag
- Eigenschaften Sammlung
-
-
-
- Creates an object which can be used to store reference properties.
- Erzeugt ein Objekt, mit dem Referenz-Eigenschaften gespeichert werden können.
-
-
-
- List of custom property groups
- Liste benutzerdefinierter Eigenschaftsgruppen
-
-
PathSlot
@@ -2495,12 +2681,12 @@ Sollte dies nötig sein, so wählen Sie bitte eine andere Operation aus.
Clearing
- Clearing
+ Wird bereinigt
Profiling
- Profiling
+ Profilierung
@@ -2794,7 +2980,7 @@ Sollte dies nötig sein, so wählen Sie bitte eine andere Operation aus.
Length/Radius positive not Null
- Length/Radius positive not Null
+ Länge/Radius positiv ungleich Null
@@ -2887,59 +3073,69 @@ Sollte dies nötig sein, so wählen Sie bitte eine andere Operation aus.Angle of ramp.
Winkel der Rampe.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Helix
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Benutzerdefiniert
+
RampEntry Dress-up
Eintauchwinkel-Erweiterung
+
+
+ Please select one path object
+ Bitte ein einzelnes Pfad-Objekt auswählen
+
+
+
+ The selected object is not a path
+ Das ausgewählte Objekt ist kein Pfad
+
+
+
+ Please select a Profile object
+ Bitte wählen Sie ein Profilobjekt
+
Path_DressupTag
-
-
- The base path to modify
- Zu ändernder Basispfad
-
-
-
- Width of tags.
- Breite des Haltesteges.
-
-
-
- Height of tags.
- Höhe des Haltesteges.
-
-
-
- Angle of tag plunge and ascent.
- Winkel der Ein- und Ausfahrt bei Haltestegen.
-
-
-
- Radius of the fillet for the tag.
- Radius der Rundung des Haltestegs.
-
-
-
- Locations of inserted holding tags
- Positionen der eingefügten Haltestege
-
-
-
- IDs of disabled holding tags
- IDs von deaktivierten Haltestegen
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Faktor, der die Anzahl an Segmenten bestimmt um abgerundete Stege anzunähern.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Kann keine Haltestege für diesen Pfad einfügen - bitte wählen Sie einen Profilpfad aus
-
The selected object is not a path
@@ -2985,6 +3181,46 @@ Sollte dies nötig sein, so wählen Sie bitte eine andere Operation aus.Create Tag Dress-up
Haltesteg-Erweiterung erzeugen
+
+
+ The base path to modify
+ Zu ändernder Basispfad
+
+
+
+ Width of tags.
+ Breite des Haltesteges.
+
+
+
+ Height of tags.
+ Höhe des Haltesteges.
+
+
+
+ Angle of tag plunge and ascent.
+ Winkel der Ein- und Ausfahrt bei Haltestegen.
+
+
+
+ Radius of the fillet for the tag.
+ Radius der Rundung des Haltestegs.
+
+
+
+ Locations of inserted holding tags
+ Positionen der eingefügten Haltestege
+
+
+
+ IDs of disabled holding tags
+ IDs von deaktivierten Haltestegen
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Faktor, der die Anzahl an Segmenten bestimmt um abgerundete Stege anzunähern.
+
No Base object found.
@@ -3005,6 +3241,11 @@ Sollte dies nötig sein, so wählen Sie bitte eine andere Operation aus.Base Path is empty.
Basispfad ist leer.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Kann keine Haltestege für diesen Pfad einfügen - bitte wählen Sie einen Profilpfad aus
+
Path_DressupZCorrect
@@ -3044,12 +3285,12 @@ Sollte dies nötig sein, so wählen Sie bitte eine andere Operation aus.
G99
- G99
+ G99
G98
- G98
+ G98
@@ -3098,6 +3339,19 @@ Sollte dies nötig sein, so wählen Sie bitte eine andere Operation aus.Gravur-Operationen
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Vorlage exportieren
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Exportiert den Path Auftrag als Vorlage, um diese für andere Aufträge zu verwenden
+
+
Path_Helix
@@ -3194,6 +3448,16 @@ Sollte dies nötig sein, so wählen Sie bitte eine andere Operation aus.Exports Path Job as a template to be used for other jobs
Exportiert den Path Auftrag als Vorlage, um diese für andere Aufträge zu verwenden
+
+
+ Edit
+ Bearbeiten
+
+
+
+ Stock not a cylinder!
+ Materialkörper ist kein Zylinder!
+
Edit Job
@@ -3214,6 +3478,16 @@ Sollte dies nötig sein, so wählen Sie bitte eine andere Operation aus.All Files (*.*)
Alle Dateien (*.*)
+
+
+ Unsupported stock object %s
+ Nicht unterstütztes Materialkörper-Objekt %s
+
+
+
+ Unsupported stock type %s (%d)
+ Nicht unterstützter Materialkörpertyp %s (%d)
+
Model Selection
@@ -3224,6 +3498,71 @@ Sollte dies nötig sein, so wählen Sie bitte eine andere Operation aus.Create Job
Auftrag erstellen
+
+
+ Fixture
+ Einspannung
+
+
+
+ Tool
+ Werkzeug
+
+
+
+ Operation
+ Operation
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Volumenkörper
+
+
+
+ Jobs
+ Aufträge
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Basis-/ + %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Quader: %.2f X %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Zylinder: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Nicht unterstützter Materialkörper-Typ
+
Path_MillFace
@@ -3246,6 +3585,24 @@ Sollte dies nötig sein, so wählen Sie bitte eine andere Operation aus.Operation aktivieren/deaktivieren
+
+ Path_Operation
+
+
+ None
+ Kein
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3455,6 +3812,14 @@ Sollte dies nötig sein, so wählen Sie bitte eine andere Operation aus.Gesamtes Modell, ausgewählte Fläche(n) oder ausgewählte Kante(n) profilieren
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ Eigenschaften Sammlung
+
+
Path_Sanity
@@ -3765,6 +4130,136 @@ Sollte dies nötig sein, so wählen Sie bitte eine andere Operation aus.
Path_Surface
+
+
+ BaseBoundBox
+ Basisbegrenzungsbox
+
+
+
+ Stock
+ Materialkörper
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Benutzerdefiniert
+
+
+
+ Conventional
+ Konventionell
+
+
+
+ Climb
+ Klettern
+
+
+
+ Circular
+ Kreisförmig
+
+
+
+ CircularZigZag
+ Ringförmges ZickZack
+
+
+
+ Line
+ Linie
+
+
+
+ Offset
+ Versetzen
+
+
+
+ Spiral
+ Spirale
+
+
+
+ ZigZag
+ ZickZack
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Gemeinsam
+
+
+
+ Individually
+ Individuell
+
+
+
+ Single-pass
+ Einzelner Durchlauf
+
+
+
+ Multi-pass
+ Mehrfachdurchlauf
+
+
+
+ None
+ Kein
+
+
+
+ Only
+ Nur
+
+
+
+ First
+ First Angle / Europäisch
+
+
+
+ Last
+ Letzte
+
+
+
+ Planar
+ Planar
+
+
+
+ Rotational
+ Rotierend
+
3D Surface
@@ -3791,22 +4286,22 @@ Sollte dies nötig sein, so wählen Sie bitte eine andere Operation aus.
Metric Internal
- Metric Internal
+ Metrisch Intern
Imperial Internal
- Imperial Internal
+ Imperial Intern
LeftHand
- LeftHand
+ Linksseitig
RightHand
- RightHand
+ Rechtsseitig
@@ -4017,6 +4512,183 @@ Sollte dies nötig sein, so wählen Sie bitte eine andere Operation aus.Eine Wasserlinien-Operation aus einem Modell erstellen
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ Diese Operation benötigt eine Installation von OpenCamLib.
+
+
+
+ OCL Dropcutter
+ OCL-"Dropcutter"
+
+
+
+ Experimental
+ Experimentell
+
+
+
+ BaseBoundBox
+ Basisbegrenzungsbox
+
+
+
+ Stock
+ Materialkörper
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Benutzerdefiniert
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Kreisförmig
+
+
+
+ CircularZigZag
+ Ringförmges ZickZack
+
+
+
+ Line
+ Linie
+
+
+
+ Offset
+ Versetzen
+
+
+
+ Spiral
+ Spirale
+
+
+
+ ZigZag
+ ZickZack
+
+
+
+ Conventional
+ Konventionell
+
+
+
+ Climb
+ Klettern
+
+
+
+ None
+ Kein
+
+
+
+ Collectively
+ Gemeinsam
+
+
+
+ Individually
+ Individuell
+
+
+
+ Single-pass
+ Einzelner Durchlauf
+
+
+
+ Multi-pass
+ Mehrfachdurchlauf
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Haltestege Erweiterung bearbeiten
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Standardlänge der Verlängerung/Erweiterungen.
+
+
+
+ List of features to extend.
+ Liste der zu erweiternden Merkmale.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ Falls aktiviert, werden die verbundenen Kanten zu Kanzenzügen vereinigt.
+
+
+
+ Uses the outline of the base geometry.
+ Benutzt die Kontur der Basisgeometrie.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Eigenschaftssammlung bearbeiten
+
+
+
+ Create PropertyBag
+ Eigenschaftssammlung erstellen
+
+
+
+ PropertyBag
+ Eigenschaften Sammlung
+
+
+
+ Creates an object which can be used to store reference properties.
+ Erzeugt ein Objekt, mit dem Referenz-Eigenschaften gespeichert werden können.
+
+
+
+ List of custom property groups
+ Liste benutzerdefinierter Eigenschaftsgruppen
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_el.qm b/src/Mod/Path/Gui/Resources/translations/Path_el.qm
index 86fe74eb38..6783a20304 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_el.qm and b/src/Mod/Path/Gui/Resources/translations/Path_el.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_el.ts b/src/Mod/Path/Gui/Resources/translations/Path_el.ts
index 8996035581..b8730c62d8 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_el.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_el.ts
@@ -213,6 +213,16 @@
The Z height of the hop
Το ύψος του άλματος στον άξονα Z
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
Stop processing
@@ -243,6 +253,111 @@
The output location for the probe data to be written
The output location for the probe data to be written
+
+
+ The base geometry for this operation
+ Η γεωμετρία βάσης για αυτήν την λειτουργία
+
+
+
+ Holds the calculated value for the StartDepth
+ Περιέχει την υπολογισμένη τιμή για το Βάθος Εκκίνησης
+
+
+
+ Holds the calculated value for the FinalDepth
+ Περιέχει την υπολογισμένη τιμή για το Τελικό Βάθος
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ Make False, to prevent operation from generating code
+ Ορίστε ως ψευδές, για να εμποδίσετε την λειτουργία να δημιουργήσει κώδικα
+
+
+
+ An optional comment for this Operation
+ Ένα προαιρετικό σχόλιο για αυτήν την Λειτουργία
+
+
+
+ User Assigned Label
+ Ετικέτα που έχει Εκχωρηθεί από τον Χρήστη
+
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
+
+
+ Base locations for this operation
+ Οι τοποθεσίες βάσης για αυτήν την λειτουργία
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Βάθος Εκκίνησης του Εργαλείου- αρχικό βάθος περικοπής στον άξονα Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Τελικό Βάθος του Εργαλείου- χαμηλότερη τιμή στον άξονα Ζ
+
+
+
+ Incremental Step Down of Tool
+ Σταδιακό Βήμα Καθόδου του Εργαλείου
+
+
+
+ Maximum material removed on final pass.
+ Αφαιρέθηκε η μέγιστη ποσότητα υλικού στο τελικό πέρασμα.
+
+
+
+ Rapid Safety Height between locations.
+ Ύψος Ασφαλείας μεταξύ τοποθεσιών σε ταχεία κίνηση.
+
+
+
+ The start point of this path
+ Το σημείο εκκίνησης αυτής της διαδρομής
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
Αριθμός Μετατόπισης Προσάρτησης
-
-
- Make False, to prevent operation from generating code
- Ορίστε ως ψευδές, για να εμποδίσετε την λειτουργία να δημιουργήσει κώδικα
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
Gcode προς εισαγωγή
+
+
+ Angle of ramp.
+ Γωνία της κεκλιμένης επιφάνειας.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Custom feed rate
+
+
+ Width of tags.
+ Πλάτος των προσαρτήσεων.
+
+
+
+ Height of tags.
+ Ύψος των προσαρτήσεων.
+
+
+
+ Angle of tag plunge and ascent.
+ Γωνία βύθισης και ανύψωσης προσάρτησης.
+
+
+
+ Radius of the fillet for the tag.
+ Ακτίνα του στρογγυλέματος για την προσάρτηση.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expression used for StepDown of new operations.
-
-
- Start pocketing at center or boundary
- Ξεκινήστε να δημιουργείτε εσοχή στο κέντρο ή στο όριο
-
-
-
- Percent of cutter diameter to step over on each pass
- Ποσοστό της διαμέτρου του κόπτη προς υπέρθεση σε κάθε πέρασμα
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Επιπλέον μετατόπιση για την υποβολή αίτησης για τη διαδικασία. Η κατεύθυνση εξαρτάται από τη λειτουργία.
+
+
+ Start pocketing at center or boundary
+ Ξεκινήστε να δημιουργείτε εσοχή στο κέντρο ή στο όριο
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Ποσοστό της διαμέτρου του κόπτη προς υπέρθεση σε κάθε πέρασμα
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Attempts to avoid unnecessary retractions.
+
+
+ The side of path to insert bones
+ Η πλευρά της διαδρομής από την οποία να εισαχθούν ράβδοι σύνδεσης
+
+
+
+ The style of bones
+ Ο τύπος μορφοποίησης των ράβδων σύνδεσης
+
+
+
+ Bones that aren't dressed up
+ Ράβδοι σύνδεσης που δεν έχουν υποστεί αναδιαμόρφωση
+
+
+
+ The algorithm to determine the bone length
+ Ο αλγόριθμος προς χρήση για τον προσδιορισμό του μήκους ράβδους σύνδεσης
+
+
+
+ Dressup length if Incision == custom
+ Μήκος αναδιαμόρφωσης αν Μήκος Τομής == προσαρμοσμένο
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ List of custom property groups
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
Το εργαλείο που χρησιμοποιείται από αυτόν τον ελεγκτή
+
+
+ List of disabled features
+ Λίστα απενεργοποιημένων χαρακτηριστικών
+
+
+
+ The NC output file for this project
+ Το αρχείο εξόδου NC για αυτό το έργο
+
+
+
+ Select the Post Processor
+ Επιλέξτε τον Τελικό Επεξεργαστή
+
+
+
+ Last Time the Job was post-processed
+ Last Time the Job was post-processed
+
+
+
+ An optional description for this job
+ An optional description for this job
+
+
+
+ Job Cycle Time Estimation
+ Job Cycle Time Estimation
+
+
+
+ Solid object to be used as stock.
+ Στερεό αντικείμενο προς χρήση ως απόθεμα.
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ SetupSheet holding the settings for this job
+ ΦύλλοΕγκατάστασης που περιέχει τις ρυθμίσεις για αυτήν την εργασία
+
+
+
+ The base objects for all operations
+ The base objects for all operations
+
+
+
+ Collection of all tool controllers for the job
+ Collection of all tool controllers for the job
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
Δεν βρέθηκε η εργασία %s
+
+
+ Illegal arc: Start and end radii not equal
+ Illegal arc: Start and end radii not equal
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
Selected tool is not a drill
-
-
- Illegal arc: Start and end radii not equal
- Illegal arc: Start and end radii not equal
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
CCW
-
-
- List of disabled features
- Λίστα απενεργοποιημένων χαρακτηριστικών
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utils
+
+
+ List of disabled features
+ Λίστα απενεργοποιημένων χαρακτηριστικών
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Creates a Deburr Path along Edges or around Faces
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Επεξεργασία Αναδιαμόρφωσης Προσαρτήσεων Στήριξης
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Μη υποστηριζόμενο αντικείμενο αποθέματος %s
-
-
-
- Unsupported stock type %s (%d)
- Μη υποστηριζόμενος τύπος αποθέματος %s(%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
Το απόθεμα δεν είναι κύλινδρος!
+
+
+ Unsupported stock object %s
+ Μη υποστηριζόμενο αντικείμενο αποθέματος %s
+
+
+
+ Unsupported stock type %s (%d)
+ Μη υποστηριζόμενος τύπος αποθέματος %s(%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Στερεό αντικείμενο προς χρήση ως απόθεμα.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Split output into multiple gcode files
-
-
-
- If multiple WCS, order the output this way
- If multiple WCS, order the output this way
-
-
-
- The Work Coordinate Systems for the Job
- The Work Coordinate Systems for the Job
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Collection of all tool controllers for the job
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- Η γεωμετρία βάσης για αυτήν την λειτουργία
-
-
-
- Holds the calculated value for the StartDepth
- Περιέχει την υπολογισμένη τιμή για το Βάθος Εκκίνησης
-
-
-
- Holds the calculated value for the FinalDepth
- Περιέχει την υπολογισμένη τιμή για το Τελικό Βάθος
-
-
-
- Holds the diameter of the tool
- Holds the diameter of the tool
-
-
-
- Holds the max Z value of Stock
- Holds the max Z value of Stock
-
-
-
- Holds the min Z value of Stock
- Holds the min Z value of Stock
-
-
-
- Make False, to prevent operation from generating code
- Ορίστε ως ψευδές, για να εμποδίσετε την λειτουργία να δημιουργήσει κώδικα
-
-
-
- An optional comment for this Operation
- Ένα προαιρετικό σχόλιο για αυτήν την Λειτουργία
-
-
-
- User Assigned Label
- Ετικέτα που έχει Εκχωρηθεί από τον Χρήστη
-
-
-
- Operations Cycle Time Estimation
- Operations Cycle Time Estimation
-
-
-
- Base locations for this operation
- Οι τοποθεσίες βάσης για αυτήν την λειτουργία
-
-
-
- Coolant mode for this operation
- Coolant mode for this operation
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Βάθος Εκκίνησης του Εργαλείου- αρχικό βάθος περικοπής στον άξονα Z
-
-
-
- Final Depth of Tool- lowest value in Z
- Τελικό Βάθος του Εργαλείου- χαμηλότερη τιμή στον άξονα Ζ
-
-
-
- Starting Depth internal use only for derived values
- Starting Depth internal use only for derived values
-
-
-
- Incremental Step Down of Tool
- Σταδιακό Βήμα Καθόδου του Εργαλείου
-
-
-
- Maximum material removed on final pass.
- Αφαιρέθηκε η μέγιστη ποσότητα υλικού στο τελικό πέρασμα.
-
-
-
- The height needed to clear clamps and obstructions
- Το απαιτούμενο ύψος για την εκκαθάριση σφιγκτήρων και εμποδίων
-
-
-
- Rapid Safety Height between locations.
- Ύψος Ασφαλείας μεταξύ τοποθεσιών σε ταχεία κίνηση.
-
-
-
- The start point of this path
- Το σημείο εκκίνησης αυτής της διαδρομής
-
-
-
- Make True, if specifying a Start Point
- Ορίστε ως Αληθές, αν καθορίζετε ένα Σημείο Εκκίνησης
-
-
-
- Lower limit of the turning diameter
- Lower limit of the turning diameter
-
-
-
- Upper limit of the turning diameter.
- Upper limit of the turning diameter.
-
-
-
- Coolant option for this operation
- Coolant option for this operation
-
Edit
@@ -1668,11 +1785,131 @@ If it is necessary to set the FinalDepth manually please select a different oper
Pick Start Point
Διαλέξτε Σημείο Εκκίνησης
+
+
+ Make False, to prevent operation from generating code
+ Ορίστε ως ψευδές, για να εμποδίσετε την λειτουργία να δημιουργήσει κώδικα
+
+
+
+ The base geometry for this operation
+ Η γεωμετρία βάσης για αυτήν την λειτουργία
+
+
+
+ Holds the calculated value for the StartDepth
+ Περιέχει την υπολογισμένη τιμή για το Βάθος Εκκίνησης
+
+
+
+ Holds the calculated value for the FinalDepth
+ Περιέχει την υπολογισμένη τιμή για το Τελικό Βάθος
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ An optional comment for this Operation
+ Ένα προαιρετικό σχόλιο για αυτήν την Λειτουργία
+
+
+
+ User Assigned Label
+ Ετικέτα που έχει Εκχωρηθεί από τον Χρήστη
+
+
+
+ Base locations for this operation
+ Οι τοποθεσίες βάσης για αυτήν την λειτουργία
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Βάθος Εκκίνησης του Εργαλείου- αρχικό βάθος περικοπής στον άξονα Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Τελικό Βάθος του Εργαλείου- χαμηλότερη τιμή στον άξονα Ζ
+
+
+
+ Starting Depth internal use only for derived values
+ Starting Depth internal use only for derived values
+
+
+
+ Incremental Step Down of Tool
+ Σταδιακό Βήμα Καθόδου του Εργαλείου
+
+
+
+ Maximum material removed on final pass.
+ Αφαιρέθηκε η μέγιστη ποσότητα υλικού στο τελικό πέρασμα.
+
+
+
+ The height needed to clear clamps and obstructions
+ Το απαιτούμενο ύψος για την εκκαθάριση σφιγκτήρων και εμποδίων
+
+
+
+ Rapid Safety Height between locations.
+ Ύψος Ασφαλείας μεταξύ τοποθεσιών σε ταχεία κίνηση.
+
+
+
+ The start point of this path
+ Το σημείο εκκίνησης αυτής της διαδρομής
+
+
+
+ Make True, if specifying a Start Point
+ Ορίστε ως Αληθές, αν καθορίζετε ένα Σημείο Εκκίνησης
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Job Cycle Time Estimation
Job Cycle Time Estimation
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
PathPlane
@@ -1735,29 +1972,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Final depth set below ZMin of face(s) selected.
-
- PathPocketShape
-
-
- Default length of extensions.
- Default length of extensions.
-
-
-
- List of features to extend.
- List of features to extend.
-
-
-
- When enabled connected extension edges are combined to wires.
- When enabled connected extension edges are combined to wires.
-
-
-
- Uses the outline of the base geometry.
- Uses the outline of the base geometry.
-
-
PathProfile
@@ -1831,34 +2045,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
For open edges, verify Final Depth for this operation.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Edit PropertyBag
-
-
-
- Create PropertyBag
- Create PropertyBag
-
-
-
- PropertyBag
- PropertyBag
-
-
-
- Creates an object which can be used to store reference properties.
- Creates an object which can be used to store reference properties.
-
-
-
- List of custom property groups
- List of custom property groups
-
-
PathSlot
@@ -2885,59 +3071,69 @@ If it is necessary to set the FinalDepth manually please select a different oper
Angle of ramp.
Γωνία της κεκλιμένης επιφάνειας.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Έλικα
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Επιλογή
+
RampEntry Dress-up
Αναδιαμόρφωση Καταχώρησης Κεκλιμένης Επιφάνειας
+
+
+ Please select one path object
+ Παρακαλώ επιλέξτε ένα αντικείμενο διαδρομής
+
+
+
+ The selected object is not a path
+ Το επιλεγμένο αντικείμενο δεν είναι διαδρομή
+
+
+
+ Please select a Profile object
+ Παρακαλώ επιλέξτε ένα αντικείμενο προφίλ
+
Path_DressupTag
-
-
- The base path to modify
- Η διαδρομή βάσης προς τροποποίηση
-
-
-
- Width of tags.
- Πλάτος των προσαρτήσεων.
-
-
-
- Height of tags.
- Ύψος των προσαρτήσεων.
-
-
-
- Angle of tag plunge and ascent.
- Γωνία βύθισης και ανύψωσης προσάρτησης.
-
-
-
- Radius of the fillet for the tag.
- Ακτίνα του στρογγυλέματος για την προσάρτηση.
-
-
-
- Locations of inserted holding tags
- Locations of inserted holding tags
-
-
-
- IDs of disabled holding tags
- IDs of disabled holding tags
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Factor determining the # of segments used to approximate rounded tags.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Cannot insert holding tags for this path - please select a Profile path
-
The selected object is not a path
@@ -2983,6 +3179,46 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Tag Dress-up
Δημιουργήστε Αναδιαμόρφωση Προσάρτησης
+
+
+ The base path to modify
+ Η διαδρομή βάσης προς τροποποίηση
+
+
+
+ Width of tags.
+ Πλάτος των προσαρτήσεων.
+
+
+
+ Height of tags.
+ Ύψος των προσαρτήσεων.
+
+
+
+ Angle of tag plunge and ascent.
+ Γωνία βύθισης και ανύψωσης προσάρτησης.
+
+
+
+ Radius of the fillet for the tag.
+ Ακτίνα του στρογγυλέματος για την προσάρτηση.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Factor determining the # of segments used to approximate rounded tags.
+
No Base object found.
@@ -3003,6 +3239,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Base Path is empty.
Η Διαδρομή βάσης είναι κενή.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Cannot insert holding tags for this path - please select a Profile path
+
Path_DressupZCorrect
@@ -3096,6 +3337,19 @@ If it is necessary to set the FinalDepth manually please select a different oper
Engraving Operations
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Εξαγωγή Προτύπου
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Εξαγωγή Εργασίας Διαδρομής ως πρότυπο προς χρήση για άλλες εργασίες
+
+
Path_Helix
@@ -3192,6 +3446,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
Exports Path Job as a template to be used for other jobs
Εξαγωγή Εργασίας Διαδρομής ως πρότυπο προς χρήση για άλλες εργασίες
+
+
+ Edit
+ Επεξεργασία
+
+
+
+ Stock not a cylinder!
+ Το απόθεμα δεν είναι κύλινδρος!
+
Edit Job
@@ -3212,6 +3476,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
All Files (*.*)
Όλα τα αρχεία (*.*)
+
+
+ Unsupported stock object %s
+ Μη υποστηριζόμενο αντικείμενο αποθέματος %s
+
+
+
+ Unsupported stock type %s (%d)
+ Μη υποστηριζόμενος τύπος αποθέματος %s(%d)
+
Model Selection
@@ -3222,6 +3496,71 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Job
Δημιουργία Εργασίας
+
+
+ Fixture
+ Προσάρτηση
+
+
+
+ Tool
+ Εργαλείο
+
+
+
+ Operation
+ Operation
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Στερεά
+
+
+
+ Jobs
+ Jobs
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Βάση -/+%.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Κιβώτιο: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Κύλινδρος: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Μη υποστηριζόμενος τύπος αποθέματος
+
Path_MillFace
@@ -3244,6 +3583,24 @@ If it is necessary to set the FinalDepth manually please select a different oper
Toggle the Active State of the Operation
+
+ Path_Operation
+
+
+ None
+ Κανένα
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3453,6 +3810,14 @@ If it is necessary to set the FinalDepth manually please select a different oper
Profile entire model, selected face(s) or selected edge(s)
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
@@ -3763,6 +4128,136 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Επιλογή
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Γραμμή
+
+
+
+ Offset
+ Μετατοπίστε
+
+
+
+ Spiral
+ Σπειροειδές
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ None
+ Κανένα
+
+
+
+ Only
+ Only
+
+
+
+ First
+ First
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Επίπεδο
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -4015,6 +4510,183 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create a Waterline Operation from a model
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ Αυτή η λειτουργία απαιτεί την εγκατάσταση της βιβλιοθήκης OpenCamLib.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Επιλογή
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Γραμμή
+
+
+
+ Offset
+ Μετατοπίστε
+
+
+
+ Spiral
+ Σπειροειδές
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ None
+ Κανένα
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Επεξεργασία Αναδιαμόρφωσης Προσαρτήσεων Στήριξης
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ When enabled connected extension edges are combined to wires.
+
+
+
+ Uses the outline of the base geometry.
+ Uses the outline of the base geometry.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Edit PropertyBag
+
+
+
+ Create PropertyBag
+ Create PropertyBag
+
+
+
+ PropertyBag
+ PropertyBag
+
+
+
+ Creates an object which can be used to store reference properties.
+ Creates an object which can be used to store reference properties.
+
+
+
+ List of custom property groups
+ List of custom property groups
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_es-AR.qm b/src/Mod/Path/Gui/Resources/translations/Path_es-AR.qm
index 3bb647979b..ba195528c6 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_es-AR.qm and b/src/Mod/Path/Gui/Resources/translations/Path_es-AR.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_es-AR.ts b/src/Mod/Path/Gui/Resources/translations/Path_es-AR.ts
index 22a6146ad3..88f654a835 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_es-AR.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_es-AR.ts
@@ -213,6 +213,16 @@
The Z height of the hop
La altura Z del salto
+
+
+ Default length of extensions.
+ Longitud de extensiones por defecto.
+
+
+
+ List of features to extend.
+ Lista de operaciones a ampliar.
+
Stop processing
@@ -243,6 +253,111 @@
The output location for the probe data to be written
La ubicación de salida para los datos de sonda a ser escrita
+
+
+ The base geometry for this operation
+ La geometría para esta operación
+
+
+
+ Holds the calculated value for the StartDepth
+ Contiene el valor calculado para StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Mantiene el valor calculado para FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Mantén el diámetro de la herramienta
+
+
+
+ Holds the max Z value of Stock
+ Mantiene el valor Z máximo de Stock
+
+
+
+ Holds the min Z value of Stock
+ Mantiene el valor Z mínimo de Stock
+
+
+
+ Make False, to prevent operation from generating code
+ Hacer falso, para evitar la operación generación de código
+
+
+
+ An optional comment for this Operation
+ Un comentario opcional para esta operación
+
+
+
+ User Assigned Label
+ Etiqueta de usuario asignado
+
+
+
+ Operations Cycle Time Estimation
+ Estimación del Tiempo del Ciclo de Operaciones
+
+
+
+ Base locations for this operation
+ Puntos base para esta operación
+
+
+
+ Coolant mode for this operation
+ Modo de Refrigerante para esta operación
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Profundidad inicial de la herramienta-primer corte en profundidad en Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Profundidad final de la herramienta- valor mas bajo en Z
+
+
+
+ Incremental Step Down of Tool
+ Paso incremental hacia abajo de la herramienta
+
+
+
+ Maximum material removed on final pass.
+ Máximo material removido en el paso final.
+
+
+
+ Rapid Safety Height between locations.
+ Altura de seguridad rápida entre dos puntos.
+
+
+
+ The start point of this path
+ Punto de partida de esta trayectoria
+
+
+
+ Lower limit of the turning diameter
+ Límite inferior del diámetro de giro
+
+
+
+ Upper limit of the turning diameter.
+ Límite superior del diámetro de giro.
+
+
+
+ Coolant option for this operation
+ Opción de Refrigerante para esta operación
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
Numero de desface de la fijación
-
-
- Make False, to prevent operation from generating code
- Hacer falso, para evitar la operación generación de código
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
El gcode se insertará
+
+
+ Angle of ramp.
+ Ángulo de rampa.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Avance personalizado
+
+
+ Width of tags.
+ Anchura de las etiquetas.
+
+
+
+ Height of tags.
+ Altura de las etiquetas.
+
+
+
+ Angle of tag plunge and ascent.
+ Ángulo de etiqueta penetración y ascenso.
+
+
+
+ Radius of the fillet for the tag.
+ Radio del redondeo de la etiqueta.
+
+
+
+ Locations of inserted holding tags
+ Ubicaciones de las etiquetas de sujeción insertadas
+
+
+
+ IDs of disabled holding tags
+ ID de etiquetas de retención deshabilitadas
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expresión que se utiliza para el Paso Descendente de nuevas operaciones.
-
-
- Start pocketing at center or boundary
- Empezar vaciando el centro o el limite
-
-
-
- Percent of cutter diameter to step over on each pass
- Por ciento del diámetro de la herramienta de corte para el sobre paso en cada pasada
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Desfase extra para aplicar a la operación. La dirección es dependiente de la operación.
+
+
+ Start pocketing at center or boundary
+ Empezar vaciando el centro o el limite
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Por ciento del diámetro de la herramienta de corte para el sobre paso en cada pasada
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Intenta evitar retracciones innecesarias.
+
+
+ The side of path to insert bones
+ El lado de la trayectoria para insertar huesos
+
+
+
+ The style of bones
+ Estilo de Huesos
+
+
+
+ Bones that aren't dressed up
+ Huesos que no están vestidos
+
+
+
+ The algorithm to determine the bone length
+ El algoritmo para determinar la longitud del hueso
+
+
+
+ Dressup length if Incision == custom
+ Longitud de vestir si incisión == personalizada
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ Lista de grupos de propiedades personalizados
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
La herramienta utilizada por este controlador
+
+
+ List of disabled features
+ Lista de Características desactivadas
+
+
+
+ The NC output file for this project
+ El archivo de salida NC para este proyecto
+
+
+
+ Select the Post Processor
+ Seleccione el postprocesador
+
+
+
+ Last Time the Job was post-processed
+ Última vez que el Trabajo fue post-procesado
+
+
+
+ An optional description for this job
+ Una descripción opcional para este trabajo
+
+
+
+ Job Cycle Time Estimation
+ Estimación del Tiempo de Ciclo de Tarea
+
+
+
+ Solid object to be used as stock.
+ Objeto sólido para ser utilizado como stock.
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ Dividir la salida en múltiples archivos gcode
+
+
+
+ If multiple WCS, order the output this way
+ Si hay varios WCS, ordena la salida de esta manera
+
+
+
+ The Work Coordinate Systems for the Job
+ Los Sistemas de Coordenadas de Trabajo para el Trabajo
+
+
+
+ SetupSheet holding the settings for this job
+ SetupSheet manteniendo la configuración para este trabajo
+
+
+
+ The base objects for all operations
+ Los objetos base para todas las operaciones
+
+
+
+ Collection of all tool controllers for the job
+ Colección de todos los controladores de herramientas para el trabajo
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
No encontro el trabajo %s
+
+
+ Illegal arc: Start and end radii not equal
+ Arco ilegal: Radio inicial y final no igual
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
La herramienta seleccionada no es perforar
-
-
- Illegal arc: Start and end radii not equal
- Arco ilegal: Radio inicial y final no igual
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
CCW
-
-
- List of disabled features
- Lista de Características desactivadas
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utilidades
+
+
+ List of disabled features
+ Lista de Características desactivadas
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Crea una ruta de Desbarbado a lo largo de las Aristas o alrededor de Caras
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Editar HoldingTags Dress-up
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Tipo de objeto stock no soportado %s
-
-
-
- Unsupported stock type %s (%d)
- No soportado tipo stock %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
No es un cilindro stock!
+
+
+ Unsupported stock object %s
+ Tipo de objeto stock no soportado %s
+
+
+
+ Unsupported stock type %s (%d)
+ No soportado tipo stock %s (%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Objeto sólido para ser utilizado como stock.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Dividir la salida en múltiples archivos gcode
-
-
-
- If multiple WCS, order the output this way
- Si hay varios WCS, ordena la salida de esta manera
-
-
-
- The Work Coordinate Systems for the Job
- Los Sistemas de Coordenadas de Trabajo para el Trabajo
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Colección de todos los controladores de herramientas para el trabajo
+
+
+ The Work Coordinate Systems for the Job
+ Los Sistemas de Coordenadas de Trabajo para el Trabajo
+
+
+
+ If multiple WCS, order the output this way
+ Si hay varios WCS, ordena la salida de esta manera
+
+
+
+ Split output into multiple gcode files
+ Dividir la salida en múltiples archivos gcode
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- La geometría para esta operación
-
-
-
- Holds the calculated value for the StartDepth
- Contiene el valor calculado para StartDepth
-
-
-
- Holds the calculated value for the FinalDepth
- Mantiene el valor calculado para FinalDepth
-
-
-
- Holds the diameter of the tool
- Mantén el diámetro de la herramienta
-
-
-
- Holds the max Z value of Stock
- Mantiene el valor Z máximo de Stock
-
-
-
- Holds the min Z value of Stock
- Mantiene el valor Z mínimo de Stock
-
-
-
- Make False, to prevent operation from generating code
- Hacer falso, para evitar la operación generación de código
-
-
-
- An optional comment for this Operation
- Un comentario opcional para esta operación
-
-
-
- User Assigned Label
- Etiqueta de usuario asignado
-
-
-
- Operations Cycle Time Estimation
- Estimación del Tiempo del Ciclo de Operaciones
-
-
-
- Base locations for this operation
- Puntos base para esta operación
-
-
-
- Coolant mode for this operation
- Modo de Refrigerante para esta operación
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Profundidad inicial de la herramienta-primer corte en profundidad en Z
-
-
-
- Final Depth of Tool- lowest value in Z
- Profundidad final de la herramienta- valor mas bajo en Z
-
-
-
- Starting Depth internal use only for derived values
- Profundidad inicial solo para uso interno de valores derivados
-
-
-
- Incremental Step Down of Tool
- Paso incremental hacia abajo de la herramienta
-
-
-
- Maximum material removed on final pass.
- Máximo material removido en el paso final.
-
-
-
- The height needed to clear clamps and obstructions
- La altura necesaria para tener libre de sujeciones y obstrucciones
-
-
-
- Rapid Safety Height between locations.
- Altura de seguridad rápida entre dos puntos.
-
-
-
- The start point of this path
- Punto de partida de esta trayectoria
-
-
-
- Make True, if specifying a Start Point
- Hacer verdadero, sí especifica un punto inicial
-
-
-
- Lower limit of the turning diameter
- Límite inferior del diámetro de giro
-
-
-
- Upper limit of the turning diameter.
- Límite superior del diámetro de giro.
-
-
-
- Coolant option for this operation
- Opción de Refrigerante para esta operación
-
Edit
@@ -1667,11 +1784,131 @@ If it is necessary to set the FinalDepth manually please select a different oper
Pick Start Point
Elegir Punto de Inicio
+
+
+ Make False, to prevent operation from generating code
+ Hacer falso, para evitar la operación generación de código
+
+
+
+ The base geometry for this operation
+ La geometría para esta operación
+
+
+
+ Holds the calculated value for the StartDepth
+ Contiene el valor calculado para StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Mantiene el valor calculado para FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Mantén el diámetro de la herramienta
+
+
+
+ Holds the max Z value of Stock
+ Mantiene el valor Z máximo de Stock
+
+
+
+ Holds the min Z value of Stock
+ Mantiene el valor Z mínimo de Stock
+
+
+
+ An optional comment for this Operation
+ Un comentario opcional para esta operación
+
+
+
+ User Assigned Label
+ Etiqueta de usuario asignado
+
+
+
+ Base locations for this operation
+ Puntos base para esta operación
+
+
+
+ Coolant mode for this operation
+ Modo de Refrigerante para esta operación
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Profundidad inicial de la herramienta-primer corte en profundidad en Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Profundidad final de la herramienta- valor mas bajo en Z
+
+
+
+ Starting Depth internal use only for derived values
+ Profundidad inicial solo para uso interno de valores derivados
+
+
+
+ Incremental Step Down of Tool
+ Paso incremental hacia abajo de la herramienta
+
+
+
+ Maximum material removed on final pass.
+ Máximo material removido en el paso final.
+
+
+
+ The height needed to clear clamps and obstructions
+ La altura necesaria para tener libre de sujeciones y obstrucciones
+
+
+
+ Rapid Safety Height between locations.
+ Altura de seguridad rápida entre dos puntos.
+
+
+
+ The start point of this path
+ Punto de partida de esta trayectoria
+
+
+
+ Make True, if specifying a Start Point
+ Hacer verdadero, sí especifica un punto inicial
+
+
+
+ Lower limit of the turning diameter
+ Límite inferior del diámetro de giro
+
+
+
+ Upper limit of the turning diameter.
+ Límite superior del diámetro de giro.
+
+
+
+ Coolant option for this operation
+ Opción de Refrigerante para esta operación
+
Job Cycle Time Estimation
Estimación del Tiempo de Ciclo de Tarea
+
+
+ Operations Cycle Time Estimation
+ Estimación del Tiempo del Ciclo de Operaciones
+
PathPlane
@@ -1734,29 +1971,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Profundidad final por debajo de ZMin de la(s) cara(s) seleccionada(s).
-
- PathPocketShape
-
-
- Default length of extensions.
- Longitud de extensiones por defecto.
-
-
-
- List of features to extend.
- Lista de operaciones a ampliar.
-
-
-
- When enabled connected extension edges are combined to wires.
- Cuando esta activado las aristas de extensión conectadas se combinan con los cables.
-
-
-
- Uses the outline of the base geometry.
- Utiliza el contorno de la geometría de base.
-
-
PathProfile
@@ -1830,34 +2044,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Para los bordes abiertos, verifique la Profundidad Final para esta operación.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Editar la tabla de propiedades
-
-
-
- Create PropertyBag
- Crear tabla de propiedades
-
-
-
- PropertyBag
- Paquete de propiedades
-
-
-
- Creates an object which can be used to store reference properties.
- Crea un objeto que puede ser usado para almacenar propiedades de referencia.
-
-
-
- List of custom property groups
- Lista de grupos de propiedades personalizados
-
-
PathSlot
@@ -2884,59 +3070,69 @@ If it is necessary to set the FinalDepth manually please select a different oper
Angle of ramp.
Ángulo de rampa.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Hélice
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Personalizado
+
RampEntry Dress-up
RampEntry Dress-up
+
+
+ Please select one path object
+ Por favor seleccione un objeto de trayectoria
+
+
+
+ The selected object is not a path
+ El objeto seleccionado no es una trayectoria
+
+
+
+ Please select a Profile object
+ Por favor, seleccione un perfil del objeto
+
Path_DressupTag
-
-
- The base path to modify
- La trayectoria base a modificar
-
-
-
- Width of tags.
- Anchura de las etiquetas.
-
-
-
- Height of tags.
- Altura de las etiquetas.
-
-
-
- Angle of tag plunge and ascent.
- Ángulo de etiqueta penetración y ascenso.
-
-
-
- Radius of the fillet for the tag.
- Radio del redondeo de la etiqueta.
-
-
-
- Locations of inserted holding tags
- Ubicaciones de las etiquetas de sujeción insertadas
-
-
-
- IDs of disabled holding tags
- ID de etiquetas de retención deshabilitadas
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Factor que determina el # de segmentos utilizado para aproximar etiquetas redondeadas.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- No puede insertar etiquetas de retención para esta trayectoria - por favor seleccione una ruta de trayectoria
-
The selected object is not a path
@@ -2982,6 +3178,46 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Tag Dress-up
Crear etiqueta Dress-up
+
+
+ The base path to modify
+ La trayectoria base a modificar
+
+
+
+ Width of tags.
+ Anchura de las etiquetas.
+
+
+
+ Height of tags.
+ Altura de las etiquetas.
+
+
+
+ Angle of tag plunge and ascent.
+ Ángulo de etiqueta penetración y ascenso.
+
+
+
+ Radius of the fillet for the tag.
+ Radio del redondeo de la etiqueta.
+
+
+
+ Locations of inserted holding tags
+ Ubicaciones de las etiquetas de sujeción insertadas
+
+
+
+ IDs of disabled holding tags
+ ID de etiquetas de retención deshabilitadas
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Factor que determina el # de segmentos utilizado para aproximar etiquetas redondeadas.
+
No Base object found.
@@ -3002,6 +3238,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Base Path is empty.
Base de la ruta está vacía.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ No puede insertar etiquetas de retención para esta trayectoria - por favor seleccione una ruta de trayectoria
+
Path_DressupZCorrect
@@ -3095,6 +3336,19 @@ If it is necessary to set the FinalDepth manually please select a different oper
Operaciones de grabado
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Exportar plantilla
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Exporta ruta de trabajo como plantilla para otros trabajos
+
+
Path_Helix
@@ -3191,6 +3445,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
Exports Path Job as a template to be used for other jobs
Exporta ruta de trabajo como plantilla para otros trabajos
+
+
+ Edit
+ Editar
+
+
+
+ Stock not a cylinder!
+ No es un cilindro stock!
+
Edit Job
@@ -3211,6 +3475,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
All Files (*.*)
Todos los archivos (*.*)
+
+
+ Unsupported stock object %s
+ Tipo de objeto stock no soportado %s
+
+
+
+ Unsupported stock type %s (%d)
+ No soportado tipo stock %s (%d)
+
Model Selection
@@ -3221,6 +3495,71 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Job
Crear Trabajo
+
+
+ Fixture
+ Accesorio
+
+
+
+ Tool
+ Herramienta
+
+
+
+ Operation
+ Operación
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Sólidos
+
+
+
+ Jobs
+ Trabajos
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Base-/ + %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Caja: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Cilindro: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Tipo de stock no compatible
+
Path_MillFace
@@ -3243,6 +3582,24 @@ If it is necessary to set the FinalDepth manually please select a different oper
Cambiar el Estado Activo de la Operación
+
+ Path_Operation
+
+
+ None
+ Ninguno
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3452,6 +3809,14 @@ If it is necessary to set the FinalDepth manually please select a different oper
Perfilar el modelo completo, la(s) cara(s) seleccionada(s) o el/los borde(s) seleccionado(s)
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ Paquete de propiedades
+
+
Path_Sanity
@@ -3762,6 +4127,136 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Personalizado
+
+
+
+ Conventional
+ Convencional
+
+
+
+ Climb
+ Escalar
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Línea
+
+
+
+ Offset
+ Desfase
+
+
+
+ Spiral
+ Espiral
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Colectivamente
+
+
+
+ Individually
+ Individualmente
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi pasada
+
+
+
+ None
+ Ninguno
+
+
+
+ Only
+ Only
+
+
+
+ First
+ Primer
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Plana
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -4014,6 +4509,183 @@ If it is necessary to set the FinalDepth manually please select a different oper
Crear una Operación de Línea de Navegación a partir de un modelo
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ Esta operación requiere OpenCamLib para instalarse.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Personalizado
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Línea
+
+
+
+ Offset
+ Desfase
+
+
+
+ Spiral
+ Espiral
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Convencional
+
+
+
+ Climb
+ Escalar
+
+
+
+ None
+ Ninguno
+
+
+
+ Collectively
+ Colectivamente
+
+
+
+ Individually
+ Individualmente
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi pasada
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Editar HoldingTags Dress-up
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Longitud de extensiones por defecto.
+
+
+
+ List of features to extend.
+ Lista de operaciones a ampliar.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ Cuando esta activado las aristas de extensión conectadas se combinan con los cables.
+
+
+
+ Uses the outline of the base geometry.
+ Utiliza el contorno de la geometría de base.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Editar la tabla de propiedades
+
+
+
+ Create PropertyBag
+ Crear tabla de propiedades
+
+
+
+ PropertyBag
+ Paquete de propiedades
+
+
+
+ Creates an object which can be used to store reference properties.
+ Crea un objeto que puede ser usado para almacenar propiedades de referencia.
+
+
+
+ List of custom property groups
+ Lista de grupos de propiedades personalizados
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.qm b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.qm
index 058e1349be..5e0a0dd209 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.qm and b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts
index 1c8169d5d8..c5d5d69ded 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts
@@ -213,6 +213,16 @@
The Z height of the hop
La altura Z del salto
+
+
+ Default length of extensions.
+ Longitud de extensiones por defecto.
+
+
+
+ List of features to extend.
+ Lista de operaciones a ampliar.
+
Stop processing
@@ -243,6 +253,111 @@
The output location for the probe data to be written
La ubicación de salida para los datos de sonda a ser escrita
+
+
+ The base geometry for this operation
+ La geometría para esta operación
+
+
+
+ Holds the calculated value for the StartDepth
+ Contiene el valor calculado para StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Mantiene el valor calculado para FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Mantén el diámetro de la herramienta
+
+
+
+ Holds the max Z value of Stock
+ Mantiene el valor Z máximo de Stock
+
+
+
+ Holds the min Z value of Stock
+ Mantiene el valor Z mínimo de Stock
+
+
+
+ Make False, to prevent operation from generating code
+ Hacer falso, para evitar la operación generación de código
+
+
+
+ An optional comment for this Operation
+ Un comentario opcional para esta operación
+
+
+
+ User Assigned Label
+ Etiqueta de usuario asignado
+
+
+
+ Operations Cycle Time Estimation
+ Estimación del Tiempo del Ciclo de Operaciones
+
+
+
+ Base locations for this operation
+ Puntos base para esta operación
+
+
+
+ Coolant mode for this operation
+ Modo de Refrigerante para esta operación
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Profundidad inicial de la herramienta-primer corte en profundidad en Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Profundidad final de la herramienta- valor mas bajo en Z
+
+
+
+ Incremental Step Down of Tool
+ Paso incremental hacia abajo de la herramienta
+
+
+
+ Maximum material removed on final pass.
+ Máximo material removido en el paso final.
+
+
+
+ Rapid Safety Height between locations.
+ Altura de seguridad rápida entre dos puntos.
+
+
+
+ The start point of this path
+ Punto de partida de esta trayectoria
+
+
+
+ Lower limit of the turning diameter
+ Límite inferior del diámetro de giro
+
+
+
+ Upper limit of the turning diameter.
+ Límite superior del diámetro de giro.
+
+
+
+ Coolant option for this operation
+ Opción de Refrigerante para esta operación
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
Numero de desface de la fijación
-
-
- Make False, to prevent operation from generating code
- Hacer falso, para evitar la operación generación de código
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
El gcode se insertará
+
+
+ Angle of ramp.
+ Ángulo de rampa.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Avance personalizado
+
+
+ Width of tags.
+ Anchura de las etiquetas.
+
+
+
+ Height of tags.
+ Altura de las etiquetas.
+
+
+
+ Angle of tag plunge and ascent.
+ Ángulo de etiqueta penetración y ascenso.
+
+
+
+ Radius of the fillet for the tag.
+ Radio del redondeo de la etiqueta.
+
+
+
+ Locations of inserted holding tags
+ Ubicaciones de las etiquetas de sujeción insertadas
+
+
+
+ IDs of disabled holding tags
+ ID de etiquetas de retención deshabilitadas
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expresión que se utiliza para el Paso Descendente de nuevas operaciones.
-
-
- Start pocketing at center or boundary
- Empezar vaciando el centro o el limite
-
-
-
- Percent of cutter diameter to step over on each pass
- Por ciento del diámetro de la herramienta de corte para el sobre paso en cada pasada
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Desfase extra para aplicar a la operación. La dirección es dependiente de la operación.
+
+
+ Start pocketing at center or boundary
+ Empezar vaciando el centro o el limite
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Por ciento del diámetro de la herramienta de corte para el sobre paso en cada pasada
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Intenta evitar retracciones innecesarias.
+
+
+ The side of path to insert bones
+ El lado de la trayectoria para insertar huesos
+
+
+
+ The style of bones
+ Estilo de Huesos
+
+
+
+ Bones that aren't dressed up
+ Huesos que no están vestidos
+
+
+
+ The algorithm to determine the bone length
+ El algoritmo para determinar la longitud del hueso
+
+
+
+ Dressup length if Incision == custom
+ Longitud de vestir si incisión == personalizada
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ Lista de grupos de propiedades personalizados
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
La herramienta utilizada por este controlador
+
+
+ List of disabled features
+ Lista de Características desactivadas
+
+
+
+ The NC output file for this project
+ El archivo de salida NC para este proyecto
+
+
+
+ Select the Post Processor
+ Seleccione el postprocesador
+
+
+
+ Last Time the Job was post-processed
+ Última vez que el Trabajo fue post-procesado
+
+
+
+ An optional description for this job
+ Una descripción opcional para este trabajo
+
+
+
+ Job Cycle Time Estimation
+ Estimación del Tiempo de Ciclo de Tarea
+
+
+
+ Solid object to be used as stock.
+ Objeto sólido para ser utilizado como stock.
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ Dividir la salida en múltiples archivos gcode
+
+
+
+ If multiple WCS, order the output this way
+ Si hay varios WCS, ordena la salida de esta manera
+
+
+
+ The Work Coordinate Systems for the Job
+ Los Sistemas de Coordenadas de Trabajo para el Trabajo
+
+
+
+ SetupSheet holding the settings for this job
+ SetupSheet manteniendo la configuración para este trabajo
+
+
+
+ The base objects for all operations
+ Los objetos base para todas las operaciones
+
+
+
+ Collection of all tool controllers for the job
+ Colección de todos los controladores de herramientas para el trabajo
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
No encontro el trabajo %s
+
+
+ Illegal arc: Start and end radii not equal
+ Arco ilegal: Radio inicial y final no igual
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
La herramienta seleccionada no es un taladro
-
-
- Illegal arc: Start and end radii not equal
- Arco ilegal: Radio inicial y final no igual
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
Sentido antihorario
-
-
- List of disabled features
- Lista de Características desactivadas
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utilidades
+
+
+ List of disabled features
+ Lista de Características desactivadas
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Crea una ruta de Desbarbado a lo largo de las Aristas o alrededor de Caras
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Editar HoldingTags Dress-up
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Tipo de objeto stock no soportado %s
-
-
-
- Unsupported stock type %s (%d)
- No soportado tipo stock %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
No es un cilindro stock!
+
+
+ Unsupported stock object %s
+ Tipo de objeto stock no soportado %s
+
+
+
+ Unsupported stock type %s (%d)
+ No soportado tipo stock %s (%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Objeto sólido para ser utilizado como stock.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Dividir la salida en múltiples archivos gcode
-
-
-
- If multiple WCS, order the output this way
- Si hay varios WCS, ordena la salida de esta manera
-
-
-
- The Work Coordinate Systems for the Job
- Los Sistemas de Coordenadas de Trabajo para el Trabajo
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Colección de todos los controladores de herramientas para el trabajo
+
+
+ The Work Coordinate Systems for the Job
+ Los Sistemas de Coordenadas de Trabajo para el Trabajo
+
+
+
+ If multiple WCS, order the output this way
+ Si hay varios WCS, ordena la salida de esta manera
+
+
+
+ Split output into multiple gcode files
+ Dividir la salida en múltiples archivos gcode
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- La geometría para esta operación
-
-
-
- Holds the calculated value for the StartDepth
- Contiene el valor calculado para StartDepth
-
-
-
- Holds the calculated value for the FinalDepth
- Mantiene el valor calculado para FinalDepth
-
-
-
- Holds the diameter of the tool
- Mantén el diámetro de la herramienta
-
-
-
- Holds the max Z value of Stock
- Mantiene el valor Z máximo de Stock
-
-
-
- Holds the min Z value of Stock
- Mantiene el valor Z mínimo de Stock
-
-
-
- Make False, to prevent operation from generating code
- Hacer falso, para evitar la operación generación de código
-
-
-
- An optional comment for this Operation
- Un comentario opcional para esta operación
-
-
-
- User Assigned Label
- Etiqueta de usuario asignado
-
-
-
- Operations Cycle Time Estimation
- Estimación del Tiempo del Ciclo de Operaciones
-
-
-
- Base locations for this operation
- Puntos base para esta operación
-
-
-
- Coolant mode for this operation
- Modo de Refrigerante para esta operación
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Profundidad inicial de la herramienta-primer corte en profundidad en Z
-
-
-
- Final Depth of Tool- lowest value in Z
- Profundidad final de la herramienta- valor mas bajo en Z
-
-
-
- Starting Depth internal use only for derived values
- Profundidad inicial solo para uso interno de valores derivados
-
-
-
- Incremental Step Down of Tool
- Paso incremental hacia abajo de la herramienta
-
-
-
- Maximum material removed on final pass.
- Máximo material removido en el paso final.
-
-
-
- The height needed to clear clamps and obstructions
- La altura necesaria para tener libre de sujeciones y obstrucciones
-
-
-
- Rapid Safety Height between locations.
- Altura de seguridad rápida entre dos puntos.
-
-
-
- The start point of this path
- Punto de partida de esta trayectoria
-
-
-
- Make True, if specifying a Start Point
- Hacer verdadero, sí especifica un punto inicial
-
-
-
- Lower limit of the turning diameter
- Límite inferior del diámetro de giro
-
-
-
- Upper limit of the turning diameter.
- Límite superior del diámetro de giro.
-
-
-
- Coolant option for this operation
- Opción de Refrigerante para esta operación
-
Edit
@@ -1667,11 +1784,131 @@ If it is necessary to set the FinalDepth manually please select a different oper
Pick Start Point
Elegir Punto de Inicio
+
+
+ Make False, to prevent operation from generating code
+ Hacer falso, para evitar la operación generación de código
+
+
+
+ The base geometry for this operation
+ La geometría para esta operación
+
+
+
+ Holds the calculated value for the StartDepth
+ Contiene el valor calculado para StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Mantiene el valor calculado para FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Mantén el diámetro de la herramienta
+
+
+
+ Holds the max Z value of Stock
+ Mantiene el valor Z máximo de Stock
+
+
+
+ Holds the min Z value of Stock
+ Mantiene el valor Z mínimo de Stock
+
+
+
+ An optional comment for this Operation
+ Un comentario opcional para esta operación
+
+
+
+ User Assigned Label
+ Etiqueta de usuario asignado
+
+
+
+ Base locations for this operation
+ Puntos base para esta operación
+
+
+
+ Coolant mode for this operation
+ Modo de Refrigerante para esta operación
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Profundidad inicial de la herramienta-primer corte en profundidad en Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Profundidad final de la herramienta- valor mas bajo en Z
+
+
+
+ Starting Depth internal use only for derived values
+ Profundidad inicial solo para uso interno de valores derivados
+
+
+
+ Incremental Step Down of Tool
+ Paso incremental hacia abajo de la herramienta
+
+
+
+ Maximum material removed on final pass.
+ Máximo material removido en el paso final.
+
+
+
+ The height needed to clear clamps and obstructions
+ La altura necesaria para tener libre de sujeciones y obstrucciones
+
+
+
+ Rapid Safety Height between locations.
+ Altura de seguridad rápida entre dos puntos.
+
+
+
+ The start point of this path
+ Punto de partida de esta trayectoria
+
+
+
+ Make True, if specifying a Start Point
+ Hacer verdadero, sí especifica un punto inicial
+
+
+
+ Lower limit of the turning diameter
+ Límite inferior del diámetro de giro
+
+
+
+ Upper limit of the turning diameter.
+ Límite superior del diámetro de giro.
+
+
+
+ Coolant option for this operation
+ Opción de Refrigerante para esta operación
+
Job Cycle Time Estimation
Estimación del Tiempo de Ciclo de Tarea
+
+
+ Operations Cycle Time Estimation
+ Estimación del Tiempo del Ciclo de Operaciones
+
PathPlane
@@ -1734,29 +1971,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Profundidad final por debajo de ZMin de la(s) cara(s) seleccionada(s).
-
- PathPocketShape
-
-
- Default length of extensions.
- Longitud de extensiones por defecto.
-
-
-
- List of features to extend.
- Lista de operaciones a ampliar.
-
-
-
- When enabled connected extension edges are combined to wires.
- Cuando esta activado las aristas de extensión conectadas se combinan con los cables.
-
-
-
- Uses the outline of the base geometry.
- Utiliza el contorno de la geometría de base.
-
-
PathProfile
@@ -1830,34 +2044,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Para los bordes abiertos, verifique la Profundidad Final para esta operación.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Editar la tabla de propiedades
-
-
-
- Create PropertyBag
- Crear tabla de propiedades
-
-
-
- PropertyBag
- Paquete de propiedades
-
-
-
- Creates an object which can be used to store reference properties.
- Crea un objeto que puede ser usado para almacenar propiedades de referencia.
-
-
-
- List of custom property groups
- Lista de grupos de propiedades personalizados
-
-
PathSlot
@@ -2884,59 +3070,69 @@ If it is necessary to set the FinalDepth manually please select a different oper
Angle of ramp.
Ángulo de rampa.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Hélice
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Personalizado
+
RampEntry Dress-up
RampEntry Dress-up
+
+
+ Please select one path object
+ Por favor seleccione un objeto de trayectoria
+
+
+
+ The selected object is not a path
+ El objeto seleccionado no es una trayectoria
+
+
+
+ Please select a Profile object
+ Por favor, seleccione un perfil del objeto
+
Path_DressupTag
-
-
- The base path to modify
- La trayectoria base a modificar
-
-
-
- Width of tags.
- Anchura de las etiquetas.
-
-
-
- Height of tags.
- Altura de las etiquetas.
-
-
-
- Angle of tag plunge and ascent.
- Ángulo de etiqueta penetración y ascenso.
-
-
-
- Radius of the fillet for the tag.
- Radio del redondeo de la etiqueta.
-
-
-
- Locations of inserted holding tags
- Ubicaciones de las etiquetas de sujeción insertadas
-
-
-
- IDs of disabled holding tags
- ID de etiquetas de retención deshabilitadas
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Factor que determina el # de segmentos utilizado para aproximar etiquetas redondeadas.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- No puede insertar etiquetas de retención para esta trayectoria - por favor seleccione una ruta de trayectoria
-
The selected object is not a path
@@ -2982,6 +3178,46 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Tag Dress-up
Crear etiqueta Dress-up
+
+
+ The base path to modify
+ La trayectoria base a modificar
+
+
+
+ Width of tags.
+ Anchura de las etiquetas.
+
+
+
+ Height of tags.
+ Altura de las etiquetas.
+
+
+
+ Angle of tag plunge and ascent.
+ Ángulo de etiqueta penetración y ascenso.
+
+
+
+ Radius of the fillet for the tag.
+ Radio del redondeo de la etiqueta.
+
+
+
+ Locations of inserted holding tags
+ Ubicaciones de las etiquetas de sujeción insertadas
+
+
+
+ IDs of disabled holding tags
+ ID de etiquetas de retención deshabilitadas
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Factor que determina el # de segmentos utilizado para aproximar etiquetas redondeadas.
+
No Base object found.
@@ -3002,6 +3238,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Base Path is empty.
Base de la ruta está vacía.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ No puede insertar etiquetas de retención para esta trayectoria - por favor seleccione una ruta de trayectoria
+
Path_DressupZCorrect
@@ -3095,6 +3336,19 @@ If it is necessary to set the FinalDepth manually please select a different oper
Operaciones de grabado
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Exportar plantilla
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Exporta ruta de trabajo como plantilla para otros trabajos
+
+
Path_Helix
@@ -3191,6 +3445,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
Exports Path Job as a template to be used for other jobs
Exporta ruta de trabajo como plantilla para otros trabajos
+
+
+ Edit
+ Editar
+
+
+
+ Stock not a cylinder!
+ No es un cilindro stock!
+
Edit Job
@@ -3211,6 +3475,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
All Files (*.*)
Todos los archivos (*.*)
+
+
+ Unsupported stock object %s
+ Tipo de objeto stock no soportado %s
+
+
+
+ Unsupported stock type %s (%d)
+ No soportado tipo stock %s (%d)
+
Model Selection
@@ -3221,6 +3495,71 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Job
Crear trabajo
+
+
+ Fixture
+ Accesorio
+
+
+
+ Tool
+ Herramienta
+
+
+
+ Operation
+ Operación
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Sólidos
+
+
+
+ Jobs
+ Trabajos
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Base-/ + %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Caja: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Cilindro: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Tipo de stock no compatible
+
Path_MillFace
@@ -3243,6 +3582,24 @@ If it is necessary to set the FinalDepth manually please select a different oper
Cambiar el Estado Activo de la Operación
+
+ Path_Operation
+
+
+ None
+ Ninguno
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3452,6 +3809,14 @@ If it is necessary to set the FinalDepth manually please select a different oper
Perfilar el modelo completo, la(s) cara(s) seleccionada(s) o el/los borde(s) seleccionado(s)
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ Paquete de propiedades
+
+
Path_Sanity
@@ -3762,6 +4127,136 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Personalizado
+
+
+
+ Conventional
+ Convencional
+
+
+
+ Climb
+ Escalar
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Línea
+
+
+
+ Offset
+ Desplazamiento
+
+
+
+ Spiral
+ Espiral
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Colectivamente
+
+
+
+ Individually
+ Individualmente
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi pasada
+
+
+
+ None
+ Ninguno
+
+
+
+ Only
+ Only
+
+
+
+ First
+ Primer
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Planar
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -4014,6 +4509,183 @@ If it is necessary to set the FinalDepth manually please select a different oper
Crear una Operación de Línea de Navegación a partir de un modelo
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ Esta operación requiere OpenCamLib para instalarse.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Personalizado
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Línea
+
+
+
+ Offset
+ Desplazamiento
+
+
+
+ Spiral
+ Espiral
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Convencional
+
+
+
+ Climb
+ Escalar
+
+
+
+ None
+ Ninguno
+
+
+
+ Collectively
+ Colectivamente
+
+
+
+ Individually
+ Individualmente
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi pasada
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Editar HoldingTags Dress-up
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Longitud de extensiones por defecto.
+
+
+
+ List of features to extend.
+ Lista de operaciones a ampliar.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ Cuando esta activado las aristas de extensión conectadas se combinan con los cables.
+
+
+
+ Uses the outline of the base geometry.
+ Utiliza el contorno de la geometría de base.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Editar la tabla de propiedades
+
+
+
+ Create PropertyBag
+ Crear tabla de propiedades
+
+
+
+ PropertyBag
+ Paquete de propiedades
+
+
+
+ Creates an object which can be used to store reference properties.
+ Crea un objeto que puede ser usado para almacenar propiedades de referencia.
+
+
+
+ List of custom property groups
+ Lista de grupos de propiedades personalizados
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_eu.qm b/src/Mod/Path/Gui/Resources/translations/Path_eu.qm
index 5dc24c3c13..24b353b2c3 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_eu.qm and b/src/Mod/Path/Gui/Resources/translations/Path_eu.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_eu.ts b/src/Mod/Path/Gui/Resources/translations/Path_eu.ts
index 95a0b16299..f333d9f814 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_eu.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_eu.ts
@@ -213,6 +213,16 @@
The Z height of the hop
Jauziaren Z altuera
+
+
+ Default length of extensions.
+ Hedapenen luzera lehenetsia.
+
+
+
+ List of features to extend.
+ Hedatuko den elementuen zerrenda.
+
Stop processing
@@ -243,6 +253,111 @@
The output location for the probe data to be written
Idatziko den haztatze-datuen irteerako kokalekua
+
+
+ The base geometry for this operation
+ Eragiketa honetarako oinarri-geometria
+
+
+
+ Holds the calculated value for the StartDepth
+ Hasierako sakonerarako kalkulatutako balioari eusten dio
+
+
+
+ Holds the calculated value for the FinalDepth
+ Amaierako sakonerarako kalkulatutako balioari eusten dio
+
+
+
+ Holds the diameter of the tool
+ Tresnaren diametroari eusten dio
+
+
+
+ Holds the max Z value of Stock
+ Pieza gordinaren Z balio maximoa du
+
+
+
+ Holds the min Z value of Stock
+ Pieza gordinaren Z balio minimoa du
+
+
+
+ Make False, to prevent operation from generating code
+ Markatu 'Gezurra', eragiketak koderik sortu dezan saihestu nahi baduzu
+
+
+
+ An optional comment for this Operation
+ Eragiketa honetarako aukerako iruzkin bat
+
+
+
+ User Assigned Label
+ Erabiltzaileak esleitutako etiketa
+
+
+
+ Operations Cycle Time Estimation
+ Eragiketen ziklo-denboraren kalkulua
+
+
+
+ Base locations for this operation
+ Eragiketa honetarako oinarri-kokapenak
+
+
+
+ Coolant mode for this operation
+ Eragiketa honetarako hozgarri-modua
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Tresnaren hasierako sakonera - lehen mozketaren sakonera Z ardatzean
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Tresnaren azken sakonera - baliorik baxuena Z ardatzean
+
+
+
+ Incremental Step Down of Tool
+ Tresnaren beheratze hazkorra
+
+
+
+ Maximum material removed on final pass.
+ Azken pasaldian kenduko den material kopuru maximoa.
+
+
+
+ Rapid Safety Height between locations.
+ Kokapenen arteko segurtasun-altuera azkarra.
+
+
+
+ The start point of this path
+ Bide honen hasiera-puntua
+
+
+
+ Lower limit of the turning diameter
+ Torneaketa-diametroaren beheko muga
+
+
+
+ Upper limit of the turning diameter.
+ Torneaketa-diametroaren goiko muga.
+
+
+
+ Coolant option for this operation
+ Eragiketa honetarako hozgarri-aukera
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
Finkapen-desplazamenduen kopurua
-
-
- Make False, to prevent operation from generating code
- Markatu 'Gezurra', eragiketak koderik sortu dezan saihestu nahi baduzu
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
Txertatuko den gcode-a
+
+
+ Angle of ramp.
+ Arrapalaren angelua.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Elikatze-abiadura pertsonalizatua
+
+
+ Width of tags.
+ Etiketen zabalera.
+
+
+
+ Height of tags.
+ Etiketen altuera.
+
+
+
+ Angle of tag plunge and ascent.
+ Etiketaren murgiltze- eta igotze-angelua.
+
+
+
+ Radius of the fillet for the tag.
+ Biribiltze-erradioa etiketarako.
+
+
+
+ Locations of inserted holding tags
+ Txertatutako euste-etiketen kokapenak
+
+
+
+ IDs of disabled holding tags
+ Desgaitutako euste-etiketen IDak
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Eragiketa berrien beheratzerako erabilitako adierazpena.
-
-
- Start pocketing at center or boundary
- Hasi poltsaren sorrera erdian edo mugan
-
-
-
- Percent of cutter diameter to step over on each pass
- Pasaldi bakoitzean ebakigailu-diametroaren zein ehuneko gainditu behar den
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Eragiketari aplikatuko zaion desplazamendu gehigarria. Norabidea eragiketaren menpekoa da.
+
+
+ Start pocketing at center or boundary
+ Hasi poltsaren sorrera erdian edo mugan
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Pasaldi bakoitzean ebakigailu-diametroaren zein ehuneko gainditu behar den
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Beharrezkoak ez diren atzeratzeak saihesteko saialdiak.
+
+
+ The side of path to insert bones
+ Hezurrak txertatuko diren bidearen alboa
+
+
+
+ The style of bones
+ Hezurren estiloa
+
+
+
+ Bones that aren't dressed up
+ Jantzi gabe dauden hezurrak
+
+
+
+ The algorithm to determine the bone length
+ Hezur-luzera zehaztuko duen algoritmoa
+
+
+
+ Dressup length if Incision == custom
+ Jantziaren luzera ebakia == pertsonalizatua bada
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ Propietate-talde pertsonalizatuen zerrenda
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
Kontrolatzaile honek erabilitako tresna
+
+
+ List of disabled features
+ Desgaitutako elementuen zerrenda
+
+
+
+ The NC output file for this project
+ Proiektu honen NC irteera-fitxategia
+
+
+
+ Select the Post Processor
+ Hautatu post-prozesadorea
+
+
+
+ Last Time the Job was post-processed
+ Lana post-prozesatu zen azken aldia
+
+
+
+ An optional description for this job
+ Lan honentzako aukerako deskribapen bat
+
+
+
+ Job Cycle Time Estimation
+ Lanaren ziklo-denboraren kalkulua
+
+
+
+ Solid object to be used as stock.
+ Pieza gordin gisa erabiliko de objektu solidoa.
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ Zatitu irteera gcode fitxategi anitzetan
+
+
+
+ If multiple WCS, order the output this way
+ WCS anitz badaude, ordenatu irteera modu honetan
+
+
+
+ The Work Coordinate Systems for the Job
+ Laneko koordenatu-sistema (WCS) lanerako
+
+
+
+ SetupSheet holding the settings for this job
+ Lan honen ezarpenak biltzen dituen konfigurazio-orria
+
+
+
+ The base objects for all operations
+ Eragiketa guztien oinarri-objektuak
+
+
+
+ Collection of all tool controllers for the job
+ Lanerako tresna-kontrolagailu guztien bilduma
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
Ez da %s lana aurkitu
+
+
+ Illegal arc: Start and end radii not equal
+ Legez kanpoko arkua: Hasierako eta amaierako erradioak ez dira berdinak
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
Hautatutako tresna ez da zulagailua
-
-
- Illegal arc: Start and end radii not equal
- Legez kanpoko arkua: Hasierako eta amaierako erradioak ez dira berdinak
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
erlojuaren noranzkoaren aurka
-
-
- List of disabled features
- Desgaitutako elementuen zerrenda
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utilitateak
+
+
+ List of disabled features
+ Desgaitutako elementuen zerrenda
+
Choose a writable location for your toolbits
@@ -1240,14 +1485,6 @@
Bizarrak kentzeko bide bat sortzen du ertzen luzeran edo aurpegien inguruan
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Editatu euste-etiketen jantzia
-
-
PathFeatureExtensions
@@ -1337,16 +1574,6 @@
PathJob
-
-
- Unsupported stock object %s
- Onartzen ez den %s objektu gordina
-
-
-
- Unsupported stock type %s (%d)
- Onartzen ez den %s objektu gordina (%d)
-
Stock not from Base bound box!
@@ -1362,6 +1589,16 @@
Stock not a cylinder!
Pieza gordina ez da zilindro bat!
+
+
+ Unsupported stock object %s
+ Onartzen ez den %s objektu gordina
+
+
+
+ Unsupported stock type %s (%d)
+ Onartzen ez den %s objektu gordina (%d)
+
The NC output file for this project
@@ -1392,26 +1629,6 @@
Solid object to be used as stock.
Pieza gordin gisa erabiliko de objektu solidoa.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Zatitu irteera gcode fitxategi anitzetan
-
-
-
- If multiple WCS, order the output this way
- WCS anitz badaude, ordenatu irteera modu honetan
-
-
-
- The Work Coordinate Systems for the Job
- Laneko koordenatu-sistema (WCS) lanerako
-
SetupSheet holding the settings for this job
@@ -1427,6 +1644,26 @@
Collection of all tool controllers for the job
Lanerako tresna-kontrolagailu guztien bilduma
+
+
+ The Work Coordinate Systems for the Job
+ Laneko koordenatu-sistema (WCS) lanerako
+
+
+
+ If multiple WCS, order the output this way
+ WCS anitz badaude, ordenatu irteera modu honetan
+
+
+
+ Split output into multiple gcode files
+ Zatitu irteera gcode fitxategi anitzetan
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1470,126 +1707,6 @@
PathOp
-
-
- The base geometry for this operation
- Eragiketa honetarako oinarri-geometria
-
-
-
- Holds the calculated value for the StartDepth
- Hasierako sakonerarako kalkulatutako balioari eusten dio
-
-
-
- Holds the calculated value for the FinalDepth
- Amaierako sakonerarako kalkulatutako balioari eusten dio
-
-
-
- Holds the diameter of the tool
- Tresnaren diametroari eusten dio
-
-
-
- Holds the max Z value of Stock
- Pieza gordinaren Z balio maximoa du
-
-
-
- Holds the min Z value of Stock
- Pieza gordinaren Z balio minimoa du
-
-
-
- Make False, to prevent operation from generating code
- Markatu 'Gezurra', eragiketak koderik sortu dezan saihestu nahi baduzu
-
-
-
- An optional comment for this Operation
- Eragiketa honetarako aukerako iruzkin bat
-
-
-
- User Assigned Label
- Erabiltzaileak esleitutako etiketa
-
-
-
- Operations Cycle Time Estimation
- Eragiketen ziklo-denboraren kalkulua
-
-
-
- Base locations for this operation
- Eragiketa honetarako oinarri-kokapenak
-
-
-
- Coolant mode for this operation
- Eragiketa honetarako hozgarri-modua
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Tresnaren hasierako sakonera - lehen mozketaren sakonera Z ardatzean
-
-
-
- Final Depth of Tool- lowest value in Z
- Tresnaren azken sakonera - baliorik baxuena Z ardatzean
-
-
-
- Starting Depth internal use only for derived values
- Hasierako sakoneraren barneko erabilera soilik balio eratorrietarako
-
-
-
- Incremental Step Down of Tool
- Tresnaren beheratze hazkorra
-
-
-
- Maximum material removed on final pass.
- Azken pasaldian kenduko den material kopuru maximoa.
-
-
-
- The height needed to clear clamps and obstructions
- Euskarriak eta buxadurak saihesteko behar den altuera
-
-
-
- Rapid Safety Height between locations.
- Kokapenen arteko segurtasun-altuera azkarra.
-
-
-
- The start point of this path
- Bide honen hasiera-puntua
-
-
-
- Make True, if specifying a Start Point
- Markatu 'Egia', hasierako puntu bat adieraziko bada
-
-
-
- Lower limit of the turning diameter
- Torneaketa-diametroaren beheko muga
-
-
-
- Upper limit of the turning diameter.
- Torneaketa-diametroaren goiko muga.
-
-
-
- Coolant option for this operation
- Eragiketa honetarako hozgarri-aukera
-
Edit
@@ -1667,11 +1784,131 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat
Pick Start Point
Aukeratu hasiera-puntua
+
+
+ Make False, to prevent operation from generating code
+ Markatu 'Gezurra', eragiketak koderik sortu dezan saihestu nahi baduzu
+
+
+
+ The base geometry for this operation
+ Eragiketa honetarako oinarri-geometria
+
+
+
+ Holds the calculated value for the StartDepth
+ Hasierako sakonerarako kalkulatutako balioari eusten dio
+
+
+
+ Holds the calculated value for the FinalDepth
+ Amaierako sakonerarako kalkulatutako balioari eusten dio
+
+
+
+ Holds the diameter of the tool
+ Tresnaren diametroari eusten dio
+
+
+
+ Holds the max Z value of Stock
+ Pieza gordinaren Z balio maximoa du
+
+
+
+ Holds the min Z value of Stock
+ Pieza gordinaren Z balio minimoa du
+
+
+
+ An optional comment for this Operation
+ Eragiketa honetarako aukerako iruzkin bat
+
+
+
+ User Assigned Label
+ Erabiltzaileak esleitutako etiketa
+
+
+
+ Base locations for this operation
+ Eragiketa honetarako oinarri-kokapenak
+
+
+
+ Coolant mode for this operation
+ Eragiketa honetarako hozgarri-modua
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Tresnaren hasierako sakonera - lehen mozketaren sakonera Z ardatzean
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Tresnaren azken sakonera - baliorik baxuena Z ardatzean
+
+
+
+ Starting Depth internal use only for derived values
+ Hasierako sakoneraren barneko erabilera soilik balio eratorrietarako
+
+
+
+ Incremental Step Down of Tool
+ Tresnaren beheratze hazkorra
+
+
+
+ Maximum material removed on final pass.
+ Azken pasaldian kenduko den material kopuru maximoa.
+
+
+
+ The height needed to clear clamps and obstructions
+ Euskarriak eta buxadurak saihesteko behar den altuera
+
+
+
+ Rapid Safety Height between locations.
+ Kokapenen arteko segurtasun-altuera azkarra.
+
+
+
+ The start point of this path
+ Bide honen hasiera-puntua
+
+
+
+ Make True, if specifying a Start Point
+ Markatu 'Egia', hasierako puntu bat adieraziko bada
+
+
+
+ Lower limit of the turning diameter
+ Torneaketa-diametroaren beheko muga
+
+
+
+ Upper limit of the turning diameter.
+ Torneaketa-diametroaren goiko muga.
+
+
+
+ Coolant option for this operation
+ Eragiketa honetarako hozgarri-aukera
+
Job Cycle Time Estimation
Lanaren ziklo-denboraren kalkulua
+
+
+ Operations Cycle Time Estimation
+ Eragiketen ziklo-denboraren kalkulua
+
PathPlane
@@ -1734,29 +1971,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat
Azken sakonera hautatutako aurpegi(ar)en ZMin azpitik ezarrita.
-
- PathPocketShape
-
-
- Default length of extensions.
- Hedapenen luzera lehenetsia.
-
-
-
- List of features to extend.
- Hedatuko den elementuen zerrenda.
-
-
-
- When enabled connected extension edges are combined to wires.
- Gaituta dagoenean, konektatutako hedapenen ertzak konbinatu egiten dira eta hariak sortzen dira.
-
-
-
- Uses the outline of the base geometry.
- Oinarri-geometriaren eskema erabiltzen du.
-
-
PathProfile
@@ -1830,34 +2044,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat
Ertz irekietan, egiaztatu eragiketa honen azken sakonera.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Editatu propietate-zorroa
-
-
-
- Create PropertyBag
- Sortu propietate-zorroa
-
-
-
- PropertyBag
- Propietate-zorroa
-
-
-
- Creates an object which can be used to store reference properties.
- Erreferentzia-propietateak biltegiratzeko erabili daitekeen objektu bat sortzen du.
-
-
-
- List of custom property groups
- Propietate-talde pertsonalizatuen zerrenda
-
-
PathSlot
@@ -2884,59 +3070,69 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat
Angle of ramp.
Arrapalaren angelua.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Helizea
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Pertsonalizatua
+
RampEntry Dress-up
Arrapala-sarreraren jantzia
+
+
+ Please select one path object
+ Hautatu bide-objektu bat
+
+
+
+ The selected object is not a path
+ Hautatutako objektua ez da bide bat
+
+
+
+ Please select a Profile object
+ Hautatu profil-objektu bat
+
Path_DressupTag
-
-
- The base path to modify
- Aldatuko den oinarri-bidea
-
-
-
- Width of tags.
- Etiketen zabalera.
-
-
-
- Height of tags.
- Etiketen altuera.
-
-
-
- Angle of tag plunge and ascent.
- Etiketaren murgiltze- eta igotze-angelua.
-
-
-
- Radius of the fillet for the tag.
- Biribiltze-erradioa etiketarako.
-
-
-
- Locations of inserted holding tags
- Txertatutako euste-etiketen kokapenak
-
-
-
- IDs of disabled holding tags
- Desgaitutako euste-etiketen IDak
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Etiketa biribilduetara hurbiltzeko erabiliko diren # segmentuak zehazteko faktorea.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Ezin dira euste-etiketak txertatu bide honetarako - hautatu profil-bide bat
-
The selected object is not a path
@@ -2982,6 +3178,46 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat
Create Tag Dress-up
Sortu etiketa-jantzi bat
+
+
+ The base path to modify
+ Aldatuko den oinarri-bidea
+
+
+
+ Width of tags.
+ Etiketen zabalera.
+
+
+
+ Height of tags.
+ Etiketen altuera.
+
+
+
+ Angle of tag plunge and ascent.
+ Etiketaren murgiltze- eta igotze-angelua.
+
+
+
+ Radius of the fillet for the tag.
+ Biribiltze-erradioa etiketarako.
+
+
+
+ Locations of inserted holding tags
+ Txertatutako euste-etiketen kokapenak
+
+
+
+ IDs of disabled holding tags
+ Desgaitutako euste-etiketen IDak
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Etiketa biribilduetara hurbiltzeko erabiliko diren # segmentuak zehazteko faktorea.
+
No Base object found.
@@ -3002,6 +3238,11 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat
Base Path is empty.
Oinarri-bidea hutsik dago.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Ezin dira euste-etiketak txertatu bide honetarako - hautatu profil-bide bat
+
Path_DressupZCorrect
@@ -3095,6 +3336,19 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat
Grabatze-eragiketak
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Esportatu txantiloia
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Bide-lana txantiloi gisa esportatzen du, beste lan batzuetan erabili ahal izateko
+
+
Path_Helix
@@ -3191,6 +3445,16 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat
Exports Path Job as a template to be used for other jobs
Bide-lana txantiloi gisa esportatzen du, beste lan batzuetan erabili ahal izateko
+
+
+ Edit
+ Editatu
+
+
+
+ Stock not a cylinder!
+ Pieza gordina ez da zilindro bat!
+
Edit Job
@@ -3211,6 +3475,16 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat
All Files (*.*)
Fitxategi guztiak (*.*)
+
+
+ Unsupported stock object %s
+ Onartzen ez den %s objektu gordina
+
+
+
+ Unsupported stock type %s (%d)
+ Onartzen ez den %s objektu gordina (%d)
+
Model Selection
@@ -3221,6 +3495,71 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat
Create Job
Sortu lana
+
+
+ Fixture
+ Finkapena
+
+
+
+ Tool
+ Tresna
+
+
+
+ Operation
+ Eragiketa
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Solidoak
+
+
+
+ Jobs
+ Lanak
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Oinarria -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Kutxa: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Zilindroa: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Onartzen ez den pieza gordina
+
Path_MillFace
@@ -3243,6 +3582,24 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat
Txandakatu eragiketaren egoera aktiboa
+
+ Path_Operation
+
+
+ None
+ Bat ere ez
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3452,6 +3809,14 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat
Profilatu eredu osoa, aurpegi hautatua(k) edo ertz hautatua(k)
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ Propietate-zorroa
+
+
Path_Sanity
@@ -3762,6 +4127,136 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat
Path_Surface
+
+
+ BaseBoundBox
+ Oinarriaren muga-koadroa
+
+
+
+ Stock
+ Pieza gordina
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Pertsonalizatua
+
+
+
+ Conventional
+ Konbentzionala
+
+
+
+ Climb
+ Igoera
+
+
+
+ Circular
+ Zirkularra
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Lerroa
+
+
+
+ Offset
+ Desplazamendua
+
+
+
+ Spiral
+ Espirala
+
+
+
+ ZigZag
+ Sigi-saga
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Taldeka
+
+
+
+ Individually
+ Banaka
+
+
+
+ Single-pass
+ Pasaldi bakarra
+
+
+
+ Multi-pass
+ Pasaldi anitz
+
+
+
+ None
+ Bat ere ez
+
+
+
+ Only
+ Soilik
+
+
+
+ First
+ Lehena
+
+
+
+ Last
+ Azkena
+
+
+
+ Planar
+ Planarra
+
+
+
+ Rotational
+ Birakaria
+
3D Surface
@@ -4014,6 +4509,183 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat
Sortu ur-lerroaren eragiketa bat modelo batetik
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ Eragiketa hau egiteko OpenCamLib instalatu behar da.
+
+
+
+ OCL Dropcutter
+ OCL erortze-ebakigailua
+
+
+
+ Experimental
+ Esperimentala
+
+
+
+ BaseBoundBox
+ Oinarriaren muga-koadroa
+
+
+
+ Stock
+ Pieza gordina
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Pertsonalizatua
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Zirkularra
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Lerroa
+
+
+
+ Offset
+ Desplazamendua
+
+
+
+ Spiral
+ Espirala
+
+
+
+ ZigZag
+ Sigi-saga
+
+
+
+ Conventional
+ Konbentzionala
+
+
+
+ Climb
+ Igoera
+
+
+
+ None
+ Bat ere ez
+
+
+
+ Collectively
+ Taldeka
+
+
+
+ Individually
+ Banaka
+
+
+
+ Single-pass
+ Pasaldi bakarra
+
+
+
+ Multi-pass
+ Pasaldi anitz
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Editatu euste-etiketen jantzia
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Hedapenen luzera lehenetsia.
+
+
+
+ List of features to extend.
+ Hedatuko den elementuen zerrenda.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ Gaituta dagoenean, konektatutako hedapenen ertzak konbinatu egiten dira eta hariak sortzen dira.
+
+
+
+ Uses the outline of the base geometry.
+ Oinarri-geometriaren eskema erabiltzen du.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Editatu propietate-zorroa
+
+
+
+ Create PropertyBag
+ Sortu propietate-zorroa
+
+
+
+ PropertyBag
+ Propietate-zorroa
+
+
+
+ Creates an object which can be used to store reference properties.
+ Erreferentzia-propietateak biltegiratzeko erabili daitekeen objektu bat sortzen du.
+
+
+
+ List of custom property groups
+ Propietate-talde pertsonalizatuen zerrenda
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fi.qm b/src/Mod/Path/Gui/Resources/translations/Path_fi.qm
index cf981e8937..292d89294b 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_fi.qm and b/src/Mod/Path/Gui/Resources/translations/Path_fi.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fi.ts b/src/Mod/Path/Gui/Resources/translations/Path_fi.ts
index 9e603dc02e..6a8a2830e3 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_fi.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_fi.ts
@@ -213,10 +213,20 @@
The Z height of the hop
The Z height of the hop
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
Stop processing
- Stop processing
+ Lopeta käsittely
@@ -243,6 +253,111 @@
The output location for the probe data to be written
The output location for the probe data to be written
+
+
+ The base geometry for this operation
+ The base geometry for this operation
+
+
+
+ Holds the calculated value for the StartDepth
+ Holds the calculated value for the StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Holds the calculated value for the FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ Make False, to prevent operation from generating code
+ Make False, to prevent operation from generating code
+
+
+
+ An optional comment for this Operation
+ An optional comment for this Operation
+
+
+
+ User Assigned Label
+ User Assigned Label
+
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
+
+
+ Base locations for this operation
+ Base locations for this operation
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Starting Depth of Tool- first cut depth in Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Final Depth of Tool- lowest value in Z
+
+
+
+ Incremental Step Down of Tool
+ Incremental Step Down of Tool
+
+
+
+ Maximum material removed on final pass.
+ Maximum material removed on final pass.
+
+
+
+ Rapid Safety Height between locations.
+ Rapid Safety Height between locations.
+
+
+
+ The start point of this path
+ The start point of this path
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
Fixture Offset Number
-
-
- Make False, to prevent operation from generating code
- Make False, to prevent operation from generating code
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
The gcode to be inserted
+
+
+ Angle of ramp.
+ Rampin kulma.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Mukautettu syötteen nopeus
+
+
+ Width of tags.
+ Width of tags.
+
+
+
+ Height of tags.
+ Height of tags.
+
+
+
+ Angle of tag plunge and ascent.
+ Angle of tag plunge and ascent.
+
+
+
+ Radius of the fillet for the tag.
+ Radius of the fillet for the tag.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expression used for StepDown of new operations.
-
-
- Start pocketing at center or boundary
- Start pocketing at center or boundary
-
-
-
- Percent of cutter diameter to step over on each pass
- Percent of cutter diameter to step over on each pass
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Extra offset to apply to the operation. Direction is operation dependent.
+
+
+ Start pocketing at center or boundary
+ Start pocketing at center or boundary
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Percent of cutter diameter to step over on each pass
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Attempts to avoid unnecessary retractions.
+
+
+ The side of path to insert bones
+ The side of path to insert bones
+
+
+
+ The style of bones
+ The style of bones
+
+
+
+ Bones that aren't dressed up
+ Bones that aren't dressed up
+
+
+
+ The algorithm to determine the bone length
+ The algorithm to determine the bone length
+
+
+
+ Dressup length if Incision == custom
+ Dressup length if Incision == custom
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ List of custom property groups
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
The tool used by this controller
+
+
+ List of disabled features
+ List of disabled features
+
+
+
+ The NC output file for this project
+ The NC output file for this project
+
+
+
+ Select the Post Processor
+ Select the Post Processor
+
+
+
+ Last Time the Job was post-processed
+ Last Time the Job was post-processed
+
+
+
+ An optional description for this job
+ An optional description for this job
+
+
+
+ Job Cycle Time Estimation
+ Job Cycle Time Estimation
+
+
+
+ Solid object to be used as stock.
+ Solid object to be used as stock.
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ SetupSheet holding the settings for this job
+ SetupSheet holding the settings for this job
+
+
+
+ The base objects for all operations
+ The base objects for all operations
+
+
+
+ Collection of all tool controllers for the job
+ Collection of all tool controllers for the job
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
Didn't find job %s
+
+
+ Illegal arc: Start and end radii not equal
+ Illegal arc: Start and end radii not equal
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
Selected tool is not a drill
-
-
- Illegal arc: Start and end radii not equal
- Illegal arc: Start and end radii not equal
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
CCW
-
-
- List of disabled features
- List of disabled features
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utils
+
+
+ List of disabled features
+ List of disabled features
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Creates a Deburr Path along Edges or around Faces
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Edit HoldingTags Dress-up
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Unsupported stock object %s
-
-
-
- Unsupported stock type %s (%d)
- Unsupported stock type %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
Stock not a cylinder!
+
+
+ Unsupported stock object %s
+ Unsupported stock object %s
+
+
+
+ Unsupported stock type %s (%d)
+ Unsupported stock type %s (%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Solid object to be used as stock.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Split output into multiple gcode files
-
-
-
- If multiple WCS, order the output this way
- If multiple WCS, order the output this way
-
-
-
- The Work Coordinate Systems for the Job
- The Work Coordinate Systems for the Job
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Collection of all tool controllers for the job
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- The base geometry for this operation
-
-
-
- Holds the calculated value for the StartDepth
- Holds the calculated value for the StartDepth
-
-
-
- Holds the calculated value for the FinalDepth
- Holds the calculated value for the FinalDepth
-
-
-
- Holds the diameter of the tool
- Holds the diameter of the tool
-
-
-
- Holds the max Z value of Stock
- Holds the max Z value of Stock
-
-
-
- Holds the min Z value of Stock
- Holds the min Z value of Stock
-
-
-
- Make False, to prevent operation from generating code
- Make False, to prevent operation from generating code
-
-
-
- An optional comment for this Operation
- An optional comment for this Operation
-
-
-
- User Assigned Label
- User Assigned Label
-
-
-
- Operations Cycle Time Estimation
- Operations Cycle Time Estimation
-
-
-
- Base locations for this operation
- Base locations for this operation
-
-
-
- Coolant mode for this operation
- Coolant mode for this operation
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Starting Depth of Tool- first cut depth in Z
-
-
-
- Final Depth of Tool- lowest value in Z
- Final Depth of Tool- lowest value in Z
-
-
-
- Starting Depth internal use only for derived values
- Starting Depth internal use only for derived values
-
-
-
- Incremental Step Down of Tool
- Incremental Step Down of Tool
-
-
-
- Maximum material removed on final pass.
- Maximum material removed on final pass.
-
-
-
- The height needed to clear clamps and obstructions
- The height needed to clear clamps and obstructions
-
-
-
- Rapid Safety Height between locations.
- Rapid Safety Height between locations.
-
-
-
- The start point of this path
- The start point of this path
-
-
-
- Make True, if specifying a Start Point
- Make True, if specifying a Start Point
-
-
-
- Lower limit of the turning diameter
- Lower limit of the turning diameter
-
-
-
- Upper limit of the turning diameter.
- Upper limit of the turning diameter.
-
-
-
- Coolant option for this operation
- Coolant option for this operation
-
Edit
@@ -1668,11 +1785,131 @@ If it is necessary to set the FinalDepth manually please select a different oper
Pick Start Point
Pick Start Point
+
+
+ Make False, to prevent operation from generating code
+ Make False, to prevent operation from generating code
+
+
+
+ The base geometry for this operation
+ The base geometry for this operation
+
+
+
+ Holds the calculated value for the StartDepth
+ Holds the calculated value for the StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Holds the calculated value for the FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ An optional comment for this Operation
+ An optional comment for this Operation
+
+
+
+ User Assigned Label
+ User Assigned Label
+
+
+
+ Base locations for this operation
+ Base locations for this operation
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Starting Depth of Tool- first cut depth in Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Final Depth of Tool- lowest value in Z
+
+
+
+ Starting Depth internal use only for derived values
+ Starting Depth internal use only for derived values
+
+
+
+ Incremental Step Down of Tool
+ Incremental Step Down of Tool
+
+
+
+ Maximum material removed on final pass.
+ Maximum material removed on final pass.
+
+
+
+ The height needed to clear clamps and obstructions
+ The height needed to clear clamps and obstructions
+
+
+
+ Rapid Safety Height between locations.
+ Rapid Safety Height between locations.
+
+
+
+ The start point of this path
+ The start point of this path
+
+
+
+ Make True, if specifying a Start Point
+ Make True, if specifying a Start Point
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Job Cycle Time Estimation
Job Cycle Time Estimation
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
PathPlane
@@ -1735,29 +1972,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Final depth set below ZMin of face(s) selected.
-
- PathPocketShape
-
-
- Default length of extensions.
- Default length of extensions.
-
-
-
- List of features to extend.
- List of features to extend.
-
-
-
- When enabled connected extension edges are combined to wires.
- When enabled connected extension edges are combined to wires.
-
-
-
- Uses the outline of the base geometry.
- Uses the outline of the base geometry.
-
-
PathProfile
@@ -1831,34 +2045,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
For open edges, verify Final Depth for this operation.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Edit PropertyBag
-
-
-
- Create PropertyBag
- Create PropertyBag
-
-
-
- PropertyBag
- PropertyBag
-
-
-
- Creates an object which can be used to store reference properties.
- Creates an object which can be used to store reference properties.
-
-
-
- List of custom property groups
- List of custom property groups
-
-
PathSlot
@@ -2493,7 +2679,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Clearing
- Clearing
+ Tyhjennetään
@@ -2885,59 +3071,69 @@ If it is necessary to set the FinalDepth manually please select a different oper
Angle of ramp.
Rampin kulma.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Kierre
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Mukautettu
+
RampEntry Dress-up
RampEntry Dress-up
+
+
+ Please select one path object
+ Please select one path object
+
+
+
+ The selected object is not a path
+ The selected object is not a path
+
+
+
+ Please select a Profile object
+ Please select a Profile object
+
Path_DressupTag
-
-
- The base path to modify
- The base path to modify
-
-
-
- Width of tags.
- Width of tags.
-
-
-
- Height of tags.
- Height of tags.
-
-
-
- Angle of tag plunge and ascent.
- Angle of tag plunge and ascent.
-
-
-
- Radius of the fillet for the tag.
- Radius of the fillet for the tag.
-
-
-
- Locations of inserted holding tags
- Locations of inserted holding tags
-
-
-
- IDs of disabled holding tags
- IDs of disabled holding tags
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Factor determining the # of segments used to approximate rounded tags.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Cannot insert holding tags for this path - please select a Profile path
-
The selected object is not a path
@@ -2983,6 +3179,46 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Tag Dress-up
Create Tag Dress-up
+
+
+ The base path to modify
+ The base path to modify
+
+
+
+ Width of tags.
+ Width of tags.
+
+
+
+ Height of tags.
+ Height of tags.
+
+
+
+ Angle of tag plunge and ascent.
+ Angle of tag plunge and ascent.
+
+
+
+ Radius of the fillet for the tag.
+ Radius of the fillet for the tag.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Factor determining the # of segments used to approximate rounded tags.
+
No Base object found.
@@ -3003,6 +3239,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Base Path is empty.
Base Path is empty.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Cannot insert holding tags for this path - please select a Profile path
+
Path_DressupZCorrect
@@ -3096,6 +3337,19 @@ If it is necessary to set the FinalDepth manually please select a different oper
Engraving Operations
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Vie malli
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Exports Path Job as a template to be used for other jobs
+
+
Path_Helix
@@ -3192,6 +3446,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
Exports Path Job as a template to be used for other jobs
Exports Path Job as a template to be used for other jobs
+
+
+ Edit
+ Muokkaa
+
+
+
+ Stock not a cylinder!
+ Stock not a cylinder!
+
Edit Job
@@ -3212,6 +3476,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
All Files (*.*)
Kaikki tiedostot (*.*)
+
+
+ Unsupported stock object %s
+ Unsupported stock object %s
+
+
+
+ Unsupported stock type %s (%d)
+ Unsupported stock type %s (%d)
+
Model Selection
@@ -3222,6 +3496,71 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Job
Luo työ
+
+
+ Fixture
+ Fixture
+
+
+
+ Tool
+ Työkalu
+
+
+
+ Operation
+ Operation
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Kiintomuodot
+
+
+
+ Jobs
+ Jobs
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Box: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Cylinder: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Unsupported stock type
+
Path_MillFace
@@ -3244,6 +3583,24 @@ If it is necessary to set the FinalDepth manually please select a different oper
Toggle the Active State of the Operation
+
+ Path_Operation
+
+
+ None
+ Ei mitään
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3453,6 +3810,14 @@ If it is necessary to set the FinalDepth manually please select a different oper
Profile entire model, selected face(s) or selected edge(s)
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
@@ -3763,6 +4128,136 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Mukautettu
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ Circular
+ Pyöreä
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Viiva
+
+
+
+ Offset
+ Siirtymä
+
+
+
+ Spiral
+ Spiraali
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ None
+ Ei mitään
+
+
+
+ Only
+ Only
+
+
+
+ First
+ Ensimmäinen
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Tasomainen
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -3789,22 +4284,22 @@ If it is necessary to set the FinalDepth manually please select a different oper
Metric Internal
- Metric Internal
+ Metrinen sisä
Imperial Internal
- Imperial Internal
+ Imperiaalinen sisä
LeftHand
- LeftHand
+ Vasenkätinen
RightHand
- RightHand
+ Oikeakätinen
@@ -4015,6 +4510,183 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create a Waterline Operation from a model
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ This operation requires OpenCamLib to be installed.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Mukautettu
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Pyöreä
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Viiva
+
+
+
+ Offset
+ Siirtymä
+
+
+
+ Spiral
+ Spiraali
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ None
+ Ei mitään
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Edit HoldingTags Dress-up
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ When enabled connected extension edges are combined to wires.
+
+
+
+ Uses the outline of the base geometry.
+ Uses the outline of the base geometry.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Edit PropertyBag
+
+
+
+ Create PropertyBag
+ Create PropertyBag
+
+
+
+ PropertyBag
+ PropertyBag
+
+
+
+ Creates an object which can be used to store reference properties.
+ Creates an object which can be used to store reference properties.
+
+
+
+ List of custom property groups
+ List of custom property groups
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fil.qm b/src/Mod/Path/Gui/Resources/translations/Path_fil.qm
index cdf46443fb..0cff7e420c 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_fil.qm and b/src/Mod/Path/Gui/Resources/translations/Path_fil.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fil.ts b/src/Mod/Path/Gui/Resources/translations/Path_fil.ts
index c5ec202a21..45887bf922 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_fil.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_fil.ts
@@ -213,6 +213,16 @@
The Z height of the hop
Ang taas ng Z ng hop
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
Stop processing
@@ -243,6 +253,111 @@
The output location for the probe data to be written
The output location for the probe data to be written
+
+
+ The base geometry for this operation
+ Ang base geometry para sa operasyong ito
+
+
+
+ Holds the calculated value for the StartDepth
+ Humahawak sa nakalkulang halaga para sa StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Humahawak sa nakalkulang halaga para sa FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ Make False, to prevent operation from generating code
+ Gaming False, para maiwasan ang operasyon mula sa pagbubuo ng code
+
+
+
+ An optional comment for this Operation
+ Ang opsyonal na komento para sa Operasyon na ito
+
+
+
+ User Assigned Label
+ Naka-assign na Label ng User
+
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
+
+
+ Base locations for this operation
+ Ang mga lokasyon ng base para sa operasyong ito
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Simulang Depth ng Tool- unag cut depth sa Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Huling lalim ng Tool - pinakamababang halaga sa Z
+
+
+
+ Incremental Step Down of Tool
+ Paunti-unting pag Step down ng Tool
+
+
+
+ Maximum material removed on final pass.
+ Pinakamataas na materyal na inalis sa final pass.
+
+
+
+ Rapid Safety Height between locations.
+ Rapid Safety Height between locations.
+
+
+
+ The start point of this path
+ Ang simulang point ng path na ito
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
Bilang ng Fixture Offset
-
-
- Make False, to prevent operation from generating code
- Gaming False, para maiwasan ang operasyon mula sa pagbubuo ng code
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
Ang gcode na dapat i-insert
+
+
+ Angle of ramp.
+ Angle ng ramp.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Custom feed rate
+
+
+ Width of tags.
+ Lapad ng tags.
+
+
+
+ Height of tags.
+ Taas ng tags.
+
+
+
+ Angle of tag plunge and ascent.
+ Angle ng tag plunge at ascent.
+
+
+
+ Radius of the fillet for the tag.
+ Radius ng fillet para sa tag.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expression used for StepDown of new operations.
-
-
- Start pocketing at center or boundary
- Magsimula ng pocketing sa sentro o sa hangganan
-
-
-
- Percent of cutter diameter to step over on each pass
- Ang porsiyento ng cutter diameter upang mag step over sa bawat pass
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Karagdagang offset na i-aplay sa operasyon. Ang direksyon ay nakadepende sa operasyon.
+
+
+ Start pocketing at center or boundary
+ Magsimula ng pocketing sa sentro o sa hangganan
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Ang porsiyento ng cutter diameter upang mag step over sa bawat pass
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Attempts to avoid unnecessary retractions.
+
+
+ The side of path to insert bones
+ Ang side ng path para i-insert ang bones
+
+
+
+ The style of bones
+ Ang estilo ng mga dolyar
+
+
+
+ Bones that aren't dressed up
+ Mga Bone na hindi naka dressed up
+
+
+
+ The algorithm to determine the bone length
+ Ang algorithm para matukoy ang haba ng length
+
+
+
+ Dressup length if Incision == custom
+ Haba ng dressup kung incision == custom
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ List of custom property groups
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
Ang tool na gamit ng controller na ito
+
+
+ List of disabled features
+ Listahan ng mga hind pinapaganang mga feature
+
+
+
+ The NC output file for this project
+ Ang NC output file para sa proyektong ito
+
+
+
+ Select the Post Processor
+ Piliin ang Post Processor
+
+
+
+ Last Time the Job was post-processed
+ Last Time the Job was post-processed
+
+
+
+ An optional description for this job
+ An optional description for this job
+
+
+
+ Job Cycle Time Estimation
+ Job Cycle Time Estimation
+
+
+
+ Solid object to be used as stock.
+ Solid na object na gagamitin bilang stock.
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ SetupSheet holding the settings for this job
+ SetupSheet na humahawak sa mga setting para sa job na ito
+
+
+
+ The base objects for all operations
+ The base objects for all operations
+
+
+
+ Collection of all tool controllers for the job
+ Collection of all tool controllers for the job
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
Hindi nakahanap ng job %s
+
+
+ Illegal arc: Start and end radii not equal
+ Illegal arc: Start and end radii not equal
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
Selected tool is not a drill
-
-
- Illegal arc: Start and end radii not equal
- Illegal arc: Start and end radii not equal
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
CCW
-
-
- List of disabled features
- Listahan ng mga hind pinapaganang mga feature
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utils
+
+
+ List of disabled features
+ Listahan ng mga hind pinapaganang mga feature
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Creates a Deburr Path along Edges or around Faces
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- I-edit ang HoldingTags Dress-up
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Hindi suportadong stock object %s
-
-
-
- Unsupported stock type %s (%d)
- Hindi suportadong uri ng stock %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
Ang stock ay hindi isang cylinder!
+
+
+ Unsupported stock object %s
+ Hindi suportadong stock object %s
+
+
+
+ Unsupported stock type %s (%d)
+ Hindi suportadong uri ng stock %s (%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Solid na object na gagamitin bilang stock.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Split output into multiple gcode files
-
-
-
- If multiple WCS, order the output this way
- If multiple WCS, order the output this way
-
-
-
- The Work Coordinate Systems for the Job
- The Work Coordinate Systems for the Job
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Collection of all tool controllers for the job
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- Ang base geometry para sa operasyong ito
-
-
-
- Holds the calculated value for the StartDepth
- Humahawak sa nakalkulang halaga para sa StartDepth
-
-
-
- Holds the calculated value for the FinalDepth
- Humahawak sa nakalkulang halaga para sa FinalDepth
-
-
-
- Holds the diameter of the tool
- Holds the diameter of the tool
-
-
-
- Holds the max Z value of Stock
- Holds the max Z value of Stock
-
-
-
- Holds the min Z value of Stock
- Holds the min Z value of Stock
-
-
-
- Make False, to prevent operation from generating code
- Gaming False, para maiwasan ang operasyon mula sa pagbubuo ng code
-
-
-
- An optional comment for this Operation
- Ang opsyonal na komento para sa Operasyon na ito
-
-
-
- User Assigned Label
- Naka-assign na Label ng User
-
-
-
- Operations Cycle Time Estimation
- Operations Cycle Time Estimation
-
-
-
- Base locations for this operation
- Ang mga lokasyon ng base para sa operasyong ito
-
-
-
- Coolant mode for this operation
- Coolant mode for this operation
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Simulang Depth ng Tool- unag cut depth sa Z
-
-
-
- Final Depth of Tool- lowest value in Z
- Huling lalim ng Tool - pinakamababang halaga sa Z
-
-
-
- Starting Depth internal use only for derived values
- Starting Depth internal use only for derived values
-
-
-
- Incremental Step Down of Tool
- Paunti-unting pag Step down ng Tool
-
-
-
- Maximum material removed on final pass.
- Pinakamataas na materyal na inalis sa final pass.
-
-
-
- The height needed to clear clamps and obstructions
- Ang tugatog na kinakailangan upang i-clear ang mga clamp at mga sagabal
-
-
-
- Rapid Safety Height between locations.
- Rapid Safety Height between locations.
-
-
-
- The start point of this path
- Ang simulang point ng path na ito
-
-
-
- Make True, if specifying a Start Point
- Gawing totoo, kung tumutukoy sa isang Start Point
-
-
-
- Lower limit of the turning diameter
- Lower limit of the turning diameter
-
-
-
- Upper limit of the turning diameter.
- Upper limit of the turning diameter.
-
-
-
- Coolant option for this operation
- Coolant option for this operation
-
Edit
@@ -1668,11 +1785,131 @@ If it is necessary to set the FinalDepth manually please select a different oper
Pick Start Point
Pumili ng Simulang Point
+
+
+ Make False, to prevent operation from generating code
+ Gaming False, para maiwasan ang operasyon mula sa pagbubuo ng code
+
+
+
+ The base geometry for this operation
+ Ang base geometry para sa operasyong ito
+
+
+
+ Holds the calculated value for the StartDepth
+ Humahawak sa nakalkulang halaga para sa StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Humahawak sa nakalkulang halaga para sa FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ An optional comment for this Operation
+ Ang opsyonal na komento para sa Operasyon na ito
+
+
+
+ User Assigned Label
+ Naka-assign na Label ng User
+
+
+
+ Base locations for this operation
+ Ang mga lokasyon ng base para sa operasyong ito
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Simulang Depth ng Tool- unag cut depth sa Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Huling lalim ng Tool - pinakamababang halaga sa Z
+
+
+
+ Starting Depth internal use only for derived values
+ Starting Depth internal use only for derived values
+
+
+
+ Incremental Step Down of Tool
+ Paunti-unting pag Step down ng Tool
+
+
+
+ Maximum material removed on final pass.
+ Pinakamataas na materyal na inalis sa final pass.
+
+
+
+ The height needed to clear clamps and obstructions
+ Ang tugatog na kinakailangan upang i-clear ang mga clamp at mga sagabal
+
+
+
+ Rapid Safety Height between locations.
+ Rapid Safety Height between locations.
+
+
+
+ The start point of this path
+ Ang simulang point ng path na ito
+
+
+
+ Make True, if specifying a Start Point
+ Gawing totoo, kung tumutukoy sa isang Start Point
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Job Cycle Time Estimation
Job Cycle Time Estimation
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
PathPlane
@@ -1735,29 +1972,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Final depth set below ZMin of face(s) selected.
-
- PathPocketShape
-
-
- Default length of extensions.
- Default length of extensions.
-
-
-
- List of features to extend.
- List of features to extend.
-
-
-
- When enabled connected extension edges are combined to wires.
- When enabled connected extension edges are combined to wires.
-
-
-
- Uses the outline of the base geometry.
- Uses the outline of the base geometry.
-
-
PathProfile
@@ -1831,34 +2045,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
For open edges, verify Final Depth for this operation.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Edit PropertyBag
-
-
-
- Create PropertyBag
- Create PropertyBag
-
-
-
- PropertyBag
- PropertyBag
-
-
-
- Creates an object which can be used to store reference properties.
- Creates an object which can be used to store reference properties.
-
-
-
- List of custom property groups
- List of custom property groups
-
-
PathSlot
@@ -2885,59 +3071,69 @@ If it is necessary to set the FinalDepth manually please select a different oper
Angle of ramp.
Angle ng ramp.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Helix
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Custom
+
RampEntry Dress-up
RampEntry Dress-up
+
+
+ Please select one path object
+ Please select one path object
+
+
+
+ The selected object is not a path
+ The selected object is not a path
+
+
+
+ Please select a Profile object
+ Mangyaring pumili ng Profile object
+
Path_DressupTag
-
-
- The base path to modify
- Ang batayang landas na baguhin
-
-
-
- Width of tags.
- Lapad ng tags.
-
-
-
- Height of tags.
- Taas ng tags.
-
-
-
- Angle of tag plunge and ascent.
- Angle ng tag plunge at ascent.
-
-
-
- Radius of the fillet for the tag.
- Radius ng fillet para sa tag.
-
-
-
- Locations of inserted holding tags
- Locations of inserted holding tags
-
-
-
- IDs of disabled holding tags
- IDs of disabled holding tags
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Factor determining the # of segments used to approximate rounded tags.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Cannot insert holding tags for this path - please select a Profile path
-
The selected object is not a path
@@ -2983,6 +3179,46 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Tag Dress-up
Lumikha ng Tag Dress-up
+
+
+ The base path to modify
+ Ang batayang landas na baguhin
+
+
+
+ Width of tags.
+ Lapad ng tags.
+
+
+
+ Height of tags.
+ Taas ng tags.
+
+
+
+ Angle of tag plunge and ascent.
+ Angle ng tag plunge at ascent.
+
+
+
+ Radius of the fillet for the tag.
+ Radius ng fillet para sa tag.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Factor determining the # of segments used to approximate rounded tags.
+
No Base object found.
@@ -3003,6 +3239,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Base Path is empty.
Ang Base Path ay walang laman.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Cannot insert holding tags for this path - please select a Profile path
+
Path_DressupZCorrect
@@ -3096,6 +3337,19 @@ If it is necessary to set the FinalDepth manually please select a different oper
Engraving Operations
+
+ Path_ExportTemplate
+
+
+ Export Template
+ I-export Template
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Nag-eeksport ng Path job bilang isang template na gagamitin para sa iba pang mga jobs
+
+
Path_Helix
@@ -3192,6 +3446,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
Exports Path Job as a template to be used for other jobs
Nag-eeksport ng Path job bilang isang template na gagamitin para sa iba pang mga jobs
+
+
+ Edit
+ I-edit
+
+
+
+ Stock not a cylinder!
+ Ang stock ay hindi isang cylinder!
+
Edit Job
@@ -3212,6 +3476,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
All Files (*.*)
All Files (*.*)
+
+
+ Unsupported stock object %s
+ Hindi suportadong stock object %s
+
+
+
+ Unsupported stock type %s (%d)
+ Hindi suportadong uri ng stock %s (%d)
+
Model Selection
@@ -3222,6 +3496,71 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Job
Lumikha ng job
+
+
+ Fixture
+ Fixture
+
+
+
+ Tool
+ Tool
+
+
+
+ Operation
+ Operation
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Solids
+
+
+
+ Jobs
+ Jobs
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Kahon: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Cylinder: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Hindi suportadong uri ng stock
+
Path_MillFace
@@ -3244,6 +3583,24 @@ If it is necessary to set the FinalDepth manually please select a different oper
Toggle the Active State of the Operation
+
+ Path_Operation
+
+
+ None
+ Wala
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3453,6 +3810,14 @@ If it is necessary to set the FinalDepth manually please select a different oper
Profile entire model, selected face(s) or selected edge(s)
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
@@ -3763,6 +4128,136 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Custom
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Guhit
+
+
+
+ Offset
+ Tabingi
+
+
+
+ Spiral
+ Spiral
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ Exis
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ None
+ Wala
+
+
+
+ Only
+ Only
+
+
+
+ First
+ First
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Planar
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -4015,6 +4510,183 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create a Waterline Operation from a model
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ This operation requires OpenCamLib to be installed.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Custom
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Guhit
+
+
+
+ Offset
+ Tabingi
+
+
+
+ Spiral
+ Spiral
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ None
+ Wala
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ I-edit ang HoldingTags Dress-up
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ When enabled connected extension edges are combined to wires.
+
+
+
+ Uses the outline of the base geometry.
+ Uses the outline of the base geometry.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Edit PropertyBag
+
+
+
+ Create PropertyBag
+ Create PropertyBag
+
+
+
+ PropertyBag
+ PropertyBag
+
+
+
+ Creates an object which can be used to store reference properties.
+ Creates an object which can be used to store reference properties.
+
+
+
+ List of custom property groups
+ List of custom property groups
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fr.qm b/src/Mod/Path/Gui/Resources/translations/Path_fr.qm
index 1313cedda9..a481cef253 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_fr.qm and b/src/Mod/Path/Gui/Resources/translations/Path_fr.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fr.ts b/src/Mod/Path/Gui/Resources/translations/Path_fr.ts
index 28395a48da..4bc5cfc410 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_fr.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_fr.ts
@@ -213,10 +213,20 @@
The Z height of the hop
La hauteur Z de ce saut
+
+
+ Default length of extensions.
+ Longueur par défaut des extensions.
+
+
+
+ List of features to extend.
+ Liste des éléments à étendre.
+
Stop processing
- Stop processing
+ Arrêter le traitement
@@ -243,6 +253,111 @@
The output location for the probe data to be written
L'emplacement de sortie pour les données de sonde à écrire
+
+
+ The base geometry for this operation
+ La géométrie de base de cette opération
+
+
+
+ Holds the calculated value for the StartDepth
+ Contient la valeur calculée pour la StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Contient la valeur calculée pour la FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Conserver le diamètre de l'outil
+
+
+
+ Holds the max Z value of Stock
+ Contient la valeur Z max du Brut
+
+
+
+ Holds the min Z value of Stock
+ Conserver la valeur min. de Z du brut
+
+
+
+ Make False, to prevent operation from generating code
+ Marquer « false », pour empêcher l'opération ne génére du code
+
+
+
+ An optional comment for this Operation
+ Commentaire pour cette opération (facultatif)
+
+
+
+ User Assigned Label
+ Label assigné par l'utilisateur
+
+
+
+ Operations Cycle Time Estimation
+ Estimation du temps de cycle des opérations
+
+
+
+ Base locations for this operation
+ Point de départ de cette opération
+
+
+
+ Coolant mode for this operation
+ Mode de lubrification pour cette opération
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Profondeur Z de première coupe de l'outil
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Profondeur finale de l'outil - plus petite valeur dans Z
+
+
+
+ Incremental Step Down of Tool
+ Incrément de pas de l'outil vers le bas
+
+
+
+ Maximum material removed on final pass.
+ Maximum de matière retirée lors de la passe finale.
+
+
+
+ Rapid Safety Height between locations.
+ Avance rapide au dessus du plan de sécurité.
+
+
+
+ The start point of this path
+ Le point de départ de ce parcours
+
+
+
+ Lower limit of the turning diameter
+ Limite inférieure du diamètre de tournage
+
+
+
+ Upper limit of the turning diameter.
+ Limite supérieure du diamètre de tournage.
+
+
+
+ Coolant option for this operation
+ Option de lubrification pour cette opération
+
Additional base objects to be engraved
@@ -256,7 +371,7 @@
Vcarve Tolerance
- Vcarve Tolerance
+ Tolérance de gravure
@@ -296,12 +411,12 @@
The Style of motion into the Path
- The Style of motion into the Path
+ Le style de mouvement dans le chemin
The Style of motion out of the Path
- The Style of motion out of the Path
+ Le style de mouvement hors du chemin
@@ -333,11 +448,6 @@
Fixture Offset Number
Nombre de déports de l'outillage
-
-
- Make False, to prevent operation from generating code
- Marquer « false », pour empêcher l'opération ne génére du code
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
Le gcode à insérer
+
+
+ Angle of ramp.
+ Angle de rampe.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Vitesse d’avance personnalisée
+
+
+ Width of tags.
+ Largeur des étiquettes.
+
+
+
+ Height of tags.
+ Hauteur des étiquettes.
+
+
+
+ Angle of tag plunge and ascent.
+ Angle de plongée et de montée.
+
+
+
+ Radius of the fillet for the tag.
+ Rayon du filet pour l'étiquette.
+
+
+
+ Locations of inserted holding tags
+ Emplacement des languettes de maintien insérées
+
+
+
+ IDs of disabled holding tags
+ IDs des languettes de maintien désactivées
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expression utilisée pour la valeur StepDown dans les nouvelles opérations.
-
-
- Start pocketing at center or boundary
- Débuter la création de la poche au centre ou sur la limite
-
-
-
- Percent of cutter diameter to step over on each pass
- Avance en pourcentage du diamètre de l'outil à chaque passe
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Décalage supplémentaire à appliquer à l’opération. Direction est opération dépendante.
+
+
+ Start pocketing at center or boundary
+ Débuter la création de la poche au centre ou sur la limite
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Avance en pourcentage du diamètre de l'outil à chaque passe
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Essaie d’éviter les rétractions inutiles.
+
+
+ The side of path to insert bones
+ Le coté du parcours sur lequel insérer les os
+
+
+
+ The style of bones
+ Le style des os
+
+
+
+ Bones that aren't dressed up
+ Les os qui ne sont pas intégrés dans la trajectoire additionnelle
+
+
+
+ The algorithm to determine the bone length
+ L'algorithme pour déterminer la longueur de l'os
+
+
+
+ Dressup length if Incision == custom
+ Longueur de trajectoire additionnelle si Incision == personnalisé
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Chiffre d'amorce pour la gigue aléatoire
+
+
+ List of custom property groups
+ Liste de groupes de propriétés personnalisés
+
The point file from the surface probing.
@@ -806,7 +981,7 @@
Split Arcs into discrete segments
- Split Arcs into discrete segments
+ Diviser les Arcs en segments discrets
@@ -848,6 +1023,76 @@
The tool used by this controller
L’outil utilisé par ce contrôleur
+
+
+ List of disabled features
+ Liste des tâches désactivés
+
+
+
+ The NC output file for this project
+ Le fichier de sortie NC pour ce projet
+
+
+
+ Select the Post Processor
+ Sélectionner un post-traitement
+
+
+
+ Last Time the Job was post-processed
+ La dernière fois que la tâche a été post-traitée
+
+
+
+ An optional description for this job
+ Une description optionnelle pour cette tâche
+
+
+
+ Job Cycle Time Estimation
+ Estimation du temps du cycle de travail
+
+
+
+ Solid object to be used as stock.
+ Objet solid a utiliser comme brut.
+
+
+
+ Select the Type of Job
+ Sélectionnez le type de tâche
+
+
+
+ Split output into multiple gcode files
+ Diviser la sortie en plusieurs fichiers gcode
+
+
+
+ If multiple WCS, order the output this way
+ En cas de WCS multiple, ordonner la sortie de cette manière
+
+
+
+ The Work Coordinate Systems for the Job
+ Les systèmes de coordonnées de travail pour la tâche
+
+
+
+ SetupSheet holding the settings for this job
+ Fiche de contrôle portant les paramètres pour cette tâche
+
+
+
+ The base objects for all operations
+ L’objet de base pour toutes les opérations
+
+
+
+ Collection of all tool controllers for the job
+ Liste de tous les contrôleurs d'outils pour la tâche
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
Ne peux trouver la tâche %s
+
+
+ Illegal arc: Start and end radii not equal
+ Arc illégal : rayons de départ et de fin non égaux
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
L’outil sélectionné n’est pas une perceuse
-
-
- Illegal arc: Start and end radii not equal
- Arc illégal : rayons de départ et de fin non égaux
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
dans le sens contraire des aiguilles d'une montre
-
-
- List of disabled features
- Liste des tâches désactivés
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utilitaires
+
+
+ List of disabled features
+ Liste des tâches désactivés
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Crée une trajectoire d'ébavurage le long des arrêtes ou autour de faces
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Modifier la trajectoire additionnelle Languettes de maintien
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Objet brut " %s " non pris en charge
-
-
-
- Unsupported stock type %s (%d)
- Type de brut " %s (%d) " non pris en charge
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
Le brut n'est pas un cylindre !
+
+
+ Unsupported stock object %s
+ Objet brut " %s " non pris en charge
+
+
+
+ Unsupported stock type %s (%d)
+ Type de brut " %s (%d) " non pris en charge
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Objet solid a utiliser comme brut.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Diviser la sortie en plusieurs fichiers gcode
-
-
-
- If multiple WCS, order the output this way
- En cas de WCS multiple, ordonner la sortie de cette manière
-
-
-
- The Work Coordinate Systems for the Job
- Les systèmes de coordonnées de travail pour la tâche
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Liste de tous les contrôleurs d'outils pour la tâche
+
+
+ The Work Coordinate Systems for the Job
+ Les systèmes de coordonnées de travail pour la tâche
+
+
+
+ If multiple WCS, order the output this way
+ En cas de WCS multiple, ordonner la sortie de cette manière
+
+
+
+ Split output into multiple gcode files
+ Diviser la sortie en plusieurs fichiers gcode
+
+
+
+ Select the Type of Job
+ Sélectionnez le type de tâche
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- La géométrie de base de cette opération
-
-
-
- Holds the calculated value for the StartDepth
- Contient la valeur calculée pour la StartDepth
-
-
-
- Holds the calculated value for the FinalDepth
- Contient la valeur calculée pour la FinalDepth
-
-
-
- Holds the diameter of the tool
- Conserver le diamètre de l'outil
-
-
-
- Holds the max Z value of Stock
- Contient la valeur Z max du Brut
-
-
-
- Holds the min Z value of Stock
- Conserver la valeur min. de Z du brut
-
-
-
- Make False, to prevent operation from generating code
- Marquer « false », pour empêcher l'opération ne génére du code
-
-
-
- An optional comment for this Operation
- Commentaire pour cette opération (facultatif)
-
-
-
- User Assigned Label
- Label assigné par l'utilisateur
-
-
-
- Operations Cycle Time Estimation
- Estimation du temps de cycle des opérations
-
-
-
- Base locations for this operation
- Point de départ de cette opération
-
-
-
- Coolant mode for this operation
- Mode de lubrification pour cette opération
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Profondeur Z de première coupe de l'outil
-
-
-
- Final Depth of Tool- lowest value in Z
- Profondeur finale de l'outil - plus petite valeur dans Z
-
-
-
- Starting Depth internal use only for derived values
- Utilisation interne de la profondeur de départ uniquement pour les valeurs dérivées
-
-
-
- Incremental Step Down of Tool
- Incrément de pas de l'outil vers le bas
-
-
-
- Maximum material removed on final pass.
- Maximum de matière retirée lors de la passe finale.
-
-
-
- The height needed to clear clamps and obstructions
- Hauteur nécessaire pour éviter les brides et autres obstacles
-
-
-
- Rapid Safety Height between locations.
- Avance rapide au dessus du plan de sécurité.
-
-
-
- The start point of this path
- Le point de départ de ce parcours
-
-
-
- Make True, if specifying a Start Point
- Marquer « true » si vous définissez un point de départ
-
-
-
- Lower limit of the turning diameter
- Limite inférieure du diamètre de tournage
-
-
-
- Upper limit of the turning diameter.
- Limite supérieure du diamètre de tournage.
-
-
-
- Coolant option for this operation
- Option de lubrification pour cette opération
-
Edit
@@ -1668,11 +1785,131 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un
Pick Start Point
Sélectionner le point de départ
+
+
+ Make False, to prevent operation from generating code
+ Marquer « false », pour empêcher l'opération ne génére du code
+
+
+
+ The base geometry for this operation
+ La géométrie de base de cette opération
+
+
+
+ Holds the calculated value for the StartDepth
+ Contient la valeur calculée pour la StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Contient la valeur calculée pour la FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Conserver le diamètre de l'outil
+
+
+
+ Holds the max Z value of Stock
+ Contient la valeur Z max du Brut
+
+
+
+ Holds the min Z value of Stock
+ Conserver la valeur min. de Z du brut
+
+
+
+ An optional comment for this Operation
+ Commentaire pour cette opération (facultatif)
+
+
+
+ User Assigned Label
+ Label assigné par l'utilisateur
+
+
+
+ Base locations for this operation
+ Point de départ de cette opération
+
+
+
+ Coolant mode for this operation
+ Mode de lubrification pour cette opération
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Profondeur Z de première coupe de l'outil
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Profondeur finale de l'outil - plus petite valeur dans Z
+
+
+
+ Starting Depth internal use only for derived values
+ Utilisation interne de la profondeur de départ uniquement pour les valeurs dérivées
+
+
+
+ Incremental Step Down of Tool
+ Incrément de pas de l'outil vers le bas
+
+
+
+ Maximum material removed on final pass.
+ Maximum de matière retirée lors de la passe finale.
+
+
+
+ The height needed to clear clamps and obstructions
+ Hauteur nécessaire pour éviter les brides et autres obstacles
+
+
+
+ Rapid Safety Height between locations.
+ Avance rapide au dessus du plan de sécurité.
+
+
+
+ The start point of this path
+ Le point de départ de ce parcours
+
+
+
+ Make True, if specifying a Start Point
+ Marquer « true » si vous définissez un point de départ
+
+
+
+ Lower limit of the turning diameter
+ Limite inférieure du diamètre de tournage
+
+
+
+ Upper limit of the turning diameter.
+ Limite supérieure du diamètre de tournage.
+
+
+
+ Coolant option for this operation
+ Option de lubrification pour cette opération
+
Job Cycle Time Estimation
Estimation du temps du cycle de travail
+
+
+ Operations Cycle Time Estimation
+ Estimation du temps de cycle des opérations
+
PathPlane
@@ -1735,29 +1972,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un
Profondeur finale définie sous ZMin de face(s) sélectionnée(s).
-
- PathPocketShape
-
-
- Default length of extensions.
- Longueur par défaut des extensions.
-
-
-
- List of features to extend.
- Liste des éléments à étendre.
-
-
-
- When enabled connected extension edges are combined to wires.
- Lorsque ceci est activé les bords des extensions connectées sont combinées en fils.
-
-
-
- Uses the outline of the base geometry.
- Utiliser les contours de la géométrie de base.
-
-
PathProfile
@@ -1831,34 +2045,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un
Pour les bords ouverts, vérifiez la Profondeur Finale pour cette opération.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Editer les attributs de l'outil
-
-
-
- Create PropertyBag
- Créer les attributs de l'outil
-
-
-
- PropertyBag
- Conteneur d'attributs d'outil coupant
-
-
-
- Creates an object which can be used to store reference properties.
- Crée un objet qui peut être utilisé pour enregistrer les propriétés de référence.
-
-
-
- List of custom property groups
- Liste de groupes de propriétés personnalisés
-
-
PathSlot
@@ -2493,12 +2679,12 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un
Clearing
- Clearing
+ Nettoyage
Profiling
- Profiling
+ Profilage
@@ -2792,7 +2978,7 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un
Length/Radius positive not Null
- Length/Radius positive not Null
+ Longueur/Rayon positif pas Null
@@ -2885,59 +3071,69 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un
Angle of ramp.
Angle de rampe.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Hélice
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Personnalisée
+
RampEntry Dress-up
Trajectoire additionnelle rampe d'entrée
+
+
+ Please select one path object
+ Veuillez sélectionner une objet parcours
+
+
+
+ The selected object is not a path
+ L'objet sélectionné n'est pas un parcours
+
+
+
+ Please select a Profile object
+ Veuillez sélectionner un objet Contour
+
Path_DressupTag
-
-
- The base path to modify
- Le parcours de base à modifier
-
-
-
- Width of tags.
- Largeur des étiquettes.
-
-
-
- Height of tags.
- Hauteur des étiquettes.
-
-
-
- Angle of tag plunge and ascent.
- Angle de plongée et de montée.
-
-
-
- Radius of the fillet for the tag.
- Rayon du filet pour l'étiquette.
-
-
-
- Locations of inserted holding tags
- Emplacement des languettes de maintien insérées
-
-
-
- IDs of disabled holding tags
- IDs des languettes de maintien désactivées
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Facteur déterminant le nombre de segments utilisés pour approximer les languettes arrondies.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Impossible d'ajouter des languettes de maintien pour ce parcours - Veuillez sélectionner un parcours Contour
-
The selected object is not a path
@@ -2983,6 +3179,46 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un
Create Tag Dress-up
Crée une trajectoire additionnelle Languettes de maintien
+
+
+ The base path to modify
+ Le parcours de base à modifier
+
+
+
+ Width of tags.
+ Largeur des étiquettes.
+
+
+
+ Height of tags.
+ Hauteur des étiquettes.
+
+
+
+ Angle of tag plunge and ascent.
+ Angle de plongée et de montée.
+
+
+
+ Radius of the fillet for the tag.
+ Rayon du filet pour l'étiquette.
+
+
+
+ Locations of inserted holding tags
+ Emplacement des languettes de maintien insérées
+
+
+
+ IDs of disabled holding tags
+ IDs des languettes de maintien désactivées
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Facteur déterminant le nombre de segments utilisés pour approximer les languettes arrondies.
+
No Base object found.
@@ -3003,6 +3239,11 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un
Base Path is empty.
Le parcours de base est vide.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Impossible d'ajouter des languettes de maintien pour ce parcours - Veuillez sélectionner un parcours Contour
+
Path_DressupZCorrect
@@ -3042,12 +3283,12 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un
G99
- G99
+ G99
G98
- G98
+ G98
@@ -3096,6 +3337,19 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un
Opérations de gravure
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Modèle d'exportation
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Exporte l'arbre de projet comme gabarit pour les prochains projets
+
+
Path_Helix
@@ -3192,6 +3446,16 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un
Exports Path Job as a template to be used for other jobs
Exporte l'arbre de projet comme gabarit pour les prochains projets
+
+
+ Edit
+ Éditer
+
+
+
+ Stock not a cylinder!
+ Le brut n'est pas un cylindre !
+
Edit Job
@@ -3212,6 +3476,16 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un
All Files (*.*)
Tous les fichiers (*.*)
+
+
+ Unsupported stock object %s
+ Objet brut " %s " non pris en charge
+
+
+
+ Unsupported stock type %s (%d)
+ Type de brut " %s (%d) " non pris en charge
+
Model Selection
@@ -3222,6 +3496,71 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un
Create Job
Créer tâche
+
+
+ Fixture
+ Point de fixation
+
+
+
+ Tool
+ Outil
+
+
+
+ Operation
+ Opération
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Solides
+
+
+
+ Jobs
+ Emplois
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Boîte: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Cylindre: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Type de brut non pris en charge
+
Path_MillFace
@@ -3244,6 +3583,24 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un
Activer/désactiver l'état actif de l'opération
+
+ Path_Operation
+
+
+ None
+ Aucun
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3453,6 +3810,14 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un
Profiler l'intégralité du modèle, de la face ou des faces sélectionnée(s) ou de l'arête ou des arêtes sélectionnée(s)
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ Conteneur d'attributs d'outil coupant
+
+
Path_Sanity
@@ -3763,6 +4128,136 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Brut
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Personnalisée
+
+
+
+ Conventional
+ Conventionnel
+
+
+
+ Climb
+ Escalader
+
+
+
+ Circular
+ Circulaire
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Ligne
+
+
+
+ Offset
+ Décalage
+
+
+
+ Spiral
+ Spirale
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Collectivement
+
+
+
+ Individually
+ Individuellement
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-passes
+
+
+
+ None
+ Aucun
+
+
+
+ Only
+ Only
+
+
+
+ First
+ Européenne
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Planaire
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -3789,22 +4284,22 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un
Metric Internal
- Metric Internal
+ Métrique - interne
Imperial Internal
- Imperial Internal
+ Interne Impériale
LeftHand
- LeftHand
+ Main gauche
RightHand
- RightHand
+ Main droite
@@ -4015,6 +4510,183 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un
Créer une opération Waterline (Contour par lignes de niveau) à partir d'un modèle
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ Cette opération nécessite l'installation d'OpenCamLib.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Brut
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Personnalisée
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Circulaire
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Ligne
+
+
+
+ Offset
+ Décalage
+
+
+
+ Spiral
+ Spirale
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Conventionnel
+
+
+
+ Climb
+ Escalader
+
+
+
+ None
+ Aucun
+
+
+
+ Collectively
+ Collectivement
+
+
+
+ Individually
+ Individuellement
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-passes
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Modifier la trajectoire additionnelle Languettes de maintien
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Longueur par défaut des extensions.
+
+
+
+ List of features to extend.
+ Liste des éléments à étendre.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ Lorsque ceci est activé les bords des extensions connectées sont combinées en fils.
+
+
+
+ Uses the outline of the base geometry.
+ Utiliser les contours de la géométrie de base.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Editer les attributs de l'outil
+
+
+
+ Create PropertyBag
+ Créer les attributs de l'outil
+
+
+
+ PropertyBag
+ Conteneur d'attributs d'outil coupant
+
+
+
+ Creates an object which can be used to store reference properties.
+ Crée un objet qui peut être utilisé pour enregistrer les propriétés de référence.
+
+
+
+ List of custom property groups
+ Liste de groupes de propriétés personnalisés
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_gl.qm b/src/Mod/Path/Gui/Resources/translations/Path_gl.qm
index 6e5256edf0..4fa8cab6fa 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_gl.qm and b/src/Mod/Path/Gui/Resources/translations/Path_gl.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_gl.ts b/src/Mod/Path/Gui/Resources/translations/Path_gl.ts
index 71a1582ee1..d2a3321882 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_gl.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_gl.ts
@@ -213,6 +213,16 @@
The Z height of the hop
A altura Z do salto
+
+
+ Default length of extensions.
+ Lonxitude por defecto de extensións.
+
+
+
+ List of features to extend.
+ Lista de características a estender.
+
Stop processing
@@ -243,6 +253,111 @@
The output location for the probe data to be written
The output location for the probe data to be written
+
+
+ The base geometry for this operation
+ Xeometría para esta operación
+
+
+
+ Holds the calculated value for the StartDepth
+ Contén o valor calculado para StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Contén o valor calculado para FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Manter o valor máximo de Z de Stock
+
+
+
+ Holds the min Z value of Stock
+ Manter o valor mínimo de Z de Stock
+
+
+
+ Make False, to prevent operation from generating code
+ Facer Falso, para impedir a operación dende o código xerado
+
+
+
+ An optional comment for this Operation
+ Un comentario opcional para esta Operación
+
+
+
+ User Assigned Label
+ Etiqueta Asinada a Usuario
+
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
+
+
+ Base locations for this operation
+ Posición base para esta operación
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Fondura de principio da ferramenta - primeira fondura de corte en Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Fondura final da ferramenta - valor máis baixo en Z
+
+
+
+ Incremental Step Down of Tool
+ Paso incrementar da ferramenta cara baixo
+
+
+
+ Maximum material removed on final pass.
+ Material máximo removido na pasaxe final.
+
+
+
+ Rapid Safety Height between locations.
+ Altura de seguridade en avance rápido entre posicións.
+
+
+
+ The start point of this path
+ O punto de principio desta traxectoria
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
Número de suxeicións
-
-
- Make False, to prevent operation from generating code
- Facer Falso, para impedir a operación dende o código xerado
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
O gcode para ser inserido
+
+
+ Angle of ramp.
+ Ángulo da rampa.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Custom feed rate
+
+
+ Width of tags.
+ Largura das etiquetas.
+
+
+
+ Height of tags.
+ Altura das etiquetas.
+
+
+
+ Angle of tag plunge and ascent.
+ Ángulo de etiqueta mentras baixa e ascende.
+
+
+
+ Radius of the fillet for the tag.
+ Radio do filete para a etiqueta.
+
+
+
+ Locations of inserted holding tags
+ Localizacións para insirir etiquetas de retención
+
+
+
+ IDs of disabled holding tags
+ IDs desactivadas nas etiquetas de retención
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expression used for StepDown of new operations.
-
-
- Start pocketing at center or boundary
- Principiar baleirando no centro ou na beira
-
-
-
- Percent of cutter diameter to step over on each pass
- Porcentaxe do diámetro da fresa para entrar no material en cada pasaxe
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Desfase extra para aplicar a operación. A dirección é dependente da operación.
+
+
+ Start pocketing at center or boundary
+ Principiar baleirando no centro ou na beira
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Porcentaxe do diámetro da fresa para entrar no material en cada pasaxe
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Attempts to avoid unnecessary retractions.
+
+
+ The side of path to insert bones
+ O lado da traxectoria para inserir ósos
+
+
+
+ The style of bones
+ Estilo de ósos
+
+
+
+ Bones that aren't dressed up
+ Ósos que non están vestidos
+
+
+
+ The algorithm to determine the bone length
+ O algoritmo para determinar a lonxitude do óso
+
+
+
+ Dressup length if Incision == custom
+ Lonxitude do vestido se incisión == personalizado
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ List of custom property groups
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
Ferramenta usada por este controlador
+
+
+ List of disabled features
+ Lista de características desactivadas
+
+
+
+ The NC output file for this project
+ O ficheiro de saída NC para este proxecto
+
+
+
+ Select the Post Processor
+ Escolme o pos-procesador
+
+
+
+ Last Time the Job was post-processed
+ Last Time the Job was post-processed
+
+
+
+ An optional description for this job
+ An optional description for this job
+
+
+
+ Job Cycle Time Estimation
+ Job Cycle Time Estimation
+
+
+
+ Solid object to be used as stock.
+ Obxecto sólido usado como stock.
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ SetupSheet holding the settings for this job
+ SetupSheet mantendo os axustes para este traballo
+
+
+
+ The base objects for all operations
+ The base objects for all operations
+
+
+
+ Collection of all tool controllers for the job
+ Collection of all tool controllers for the job
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
Non atopo chollo %s
+
+
+ Illegal arc: Start and end radii not equal
+ Illegal arc: Start and end radii not equal
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
Selected tool is not a drill
-
-
- Illegal arc: Start and end radii not equal
- Illegal arc: Start and end radii not equal
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
CCW
-
-
- List of disabled features
- Lista de características desactivadas
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utils
+
+
+ List of disabled features
+ Lista de características desactivadas
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Creates a Deburr Path along Edges or around Faces
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Edita o aspecto das etiquetas de subxección
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Obxecto de stock non soportado %s
-
-
-
- Unsupported stock type %s (%d)
- Tipo de stock non soportado %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
Non un cilindo de existencias!
+
+
+ Unsupported stock object %s
+ Obxecto de stock non soportado %s
+
+
+
+ Unsupported stock type %s (%d)
+ Tipo de stock non soportado %s (%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Obxecto sólido usado como stock.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Split output into multiple gcode files
-
-
-
- If multiple WCS, order the output this way
- If multiple WCS, order the output this way
-
-
-
- The Work Coordinate Systems for the Job
- The Work Coordinate Systems for the Job
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Collection of all tool controllers for the job
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- Xeometría para esta operación
-
-
-
- Holds the calculated value for the StartDepth
- Contén o valor calculado para StartDepth
-
-
-
- Holds the calculated value for the FinalDepth
- Contén o valor calculado para FinalDepth
-
-
-
- Holds the diameter of the tool
- Holds the diameter of the tool
-
-
-
- Holds the max Z value of Stock
- Manter o valor máximo de Z de Stock
-
-
-
- Holds the min Z value of Stock
- Manter o valor mínimo de Z de Stock
-
-
-
- Make False, to prevent operation from generating code
- Facer Falso, para impedir a operación dende o código xerado
-
-
-
- An optional comment for this Operation
- Un comentario opcional para esta Operación
-
-
-
- User Assigned Label
- Etiqueta Asinada a Usuario
-
-
-
- Operations Cycle Time Estimation
- Operations Cycle Time Estimation
-
-
-
- Base locations for this operation
- Posición base para esta operación
-
-
-
- Coolant mode for this operation
- Coolant mode for this operation
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Fondura de principio da ferramenta - primeira fondura de corte en Z
-
-
-
- Final Depth of Tool- lowest value in Z
- Fondura final da ferramenta - valor máis baixo en Z
-
-
-
- Starting Depth internal use only for derived values
- Iniciar uso interno Depth so para valores derivados
-
-
-
- Incremental Step Down of Tool
- Paso incrementar da ferramenta cara baixo
-
-
-
- Maximum material removed on final pass.
- Material máximo removido na pasaxe final.
-
-
-
- The height needed to clear clamps and obstructions
- A altura precisa para librar de mordazas e obstrucións
-
-
-
- Rapid Safety Height between locations.
- Altura de seguridade en avance rápido entre posicións.
-
-
-
- The start point of this path
- O punto de principio desta traxectoria
-
-
-
- Make True, if specifying a Start Point
- Facer verdadeiro, se se especifica un punto de principio
-
-
-
- Lower limit of the turning diameter
- Lower limit of the turning diameter
-
-
-
- Upper limit of the turning diameter.
- Upper limit of the turning diameter.
-
-
-
- Coolant option for this operation
- Coolant option for this operation
-
Edit
@@ -1668,11 +1785,131 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc
Pick Start Point
Escolmar punto de arrinque
+
+
+ Make False, to prevent operation from generating code
+ Facer Falso, para impedir a operación dende o código xerado
+
+
+
+ The base geometry for this operation
+ Xeometría para esta operación
+
+
+
+ Holds the calculated value for the StartDepth
+ Contén o valor calculado para StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Contén o valor calculado para FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Manter o valor máximo de Z de Stock
+
+
+
+ Holds the min Z value of Stock
+ Manter o valor mínimo de Z de Stock
+
+
+
+ An optional comment for this Operation
+ Un comentario opcional para esta Operación
+
+
+
+ User Assigned Label
+ Etiqueta Asinada a Usuario
+
+
+
+ Base locations for this operation
+ Posición base para esta operación
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Fondura de principio da ferramenta - primeira fondura de corte en Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Fondura final da ferramenta - valor máis baixo en Z
+
+
+
+ Starting Depth internal use only for derived values
+ Iniciar uso interno Depth so para valores derivados
+
+
+
+ Incremental Step Down of Tool
+ Paso incrementar da ferramenta cara baixo
+
+
+
+ Maximum material removed on final pass.
+ Material máximo removido na pasaxe final.
+
+
+
+ The height needed to clear clamps and obstructions
+ A altura precisa para librar de mordazas e obstrucións
+
+
+
+ Rapid Safety Height between locations.
+ Altura de seguridade en avance rápido entre posicións.
+
+
+
+ The start point of this path
+ O punto de principio desta traxectoria
+
+
+
+ Make True, if specifying a Start Point
+ Facer verdadeiro, se se especifica un punto de principio
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Job Cycle Time Estimation
Job Cycle Time Estimation
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
PathPlane
@@ -1735,29 +1972,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc
Final depth set below ZMin of face(s) selected.
-
- PathPocketShape
-
-
- Default length of extensions.
- Lonxitude por defecto de extensións.
-
-
-
- List of features to extend.
- Lista de características a estender.
-
-
-
- When enabled connected extension edges are combined to wires.
- Cando habilita o bordo da extensión conecta combinando arames.
-
-
-
- Uses the outline of the base geometry.
- Usar a contorna da base xeométrica.
-
-
PathProfile
@@ -1831,34 +2045,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc
For open edges, verify Final Depth for this operation.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Edit PropertyBag
-
-
-
- Create PropertyBag
- Create PropertyBag
-
-
-
- PropertyBag
- PropertyBag
-
-
-
- Creates an object which can be used to store reference properties.
- Creates an object which can be used to store reference properties.
-
-
-
- List of custom property groups
- List of custom property groups
-
-
PathSlot
@@ -2885,59 +3071,69 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc
Angle of ramp.
Ángulo da rampa.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Hélice
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Personalizar
+
RampEntry Dress-up
Aspecto da EntradaRampa
+
+
+ Please select one path object
+ Por favor, escolme un obxecto traxectoria
+
+
+
+ The selected object is not a path
+ O obxecto escolmado non é unha traxectoria
+
+
+
+ Please select a Profile object
+ Por favor escolma un obxecto Perfil
+
Path_DressupTag
-
-
- The base path to modify
- A traxectoria base para modificar
-
-
-
- Width of tags.
- Largura das etiquetas.
-
-
-
- Height of tags.
- Altura das etiquetas.
-
-
-
- Angle of tag plunge and ascent.
- Ángulo de etiqueta mentras baixa e ascende.
-
-
-
- Radius of the fillet for the tag.
- Radio do filete para a etiqueta.
-
-
-
- Locations of inserted holding tags
- Localizacións para insirir etiquetas de retención
-
-
-
- IDs of disabled holding tags
- IDs desactivadas nas etiquetas de retención
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Factor determinante do # de segmentos usados para aproximar nas etiquetas redondeadas.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Non se pode inserir etiquetas de retención para traxectoria - fai o favor de escolmar unha traxectoria do Perfil
-
The selected object is not a path
@@ -2983,6 +3179,46 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc
Create Tag Dress-up
Crea Etiqueta de aspecto
+
+
+ The base path to modify
+ A traxectoria base para modificar
+
+
+
+ Width of tags.
+ Largura das etiquetas.
+
+
+
+ Height of tags.
+ Altura das etiquetas.
+
+
+
+ Angle of tag plunge and ascent.
+ Ángulo de etiqueta mentras baixa e ascende.
+
+
+
+ Radius of the fillet for the tag.
+ Radio do filete para a etiqueta.
+
+
+
+ Locations of inserted holding tags
+ Localizacións para insirir etiquetas de retención
+
+
+
+ IDs of disabled holding tags
+ IDs desactivadas nas etiquetas de retención
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Factor determinante do # de segmentos usados para aproximar nas etiquetas redondeadas.
+
No Base object found.
@@ -3003,6 +3239,11 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc
Base Path is empty.
Ruta Base está baleira.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Non se pode inserir etiquetas de retención para traxectoria - fai o favor de escolmar unha traxectoria do Perfil
+
Path_DressupZCorrect
@@ -3096,6 +3337,19 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc
Operacións de gravado
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Exporta Plantilla
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Exporta Traxectoria de Traballo como plantilla usada para outros traballos
+
+
Path_Helix
@@ -3192,6 +3446,16 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc
Exports Path Job as a template to be used for other jobs
Exporta Traxectoria de Traballo como plantilla usada para outros traballos
+
+
+ Edit
+ Editar
+
+
+
+ Stock not a cylinder!
+ Non un cilindo de existencias!
+
Edit Job
@@ -3212,6 +3476,16 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc
All Files (*.*)
Tódolos ficheiros (*.*)
+
+
+ Unsupported stock object %s
+ Obxecto de stock non soportado %s
+
+
+
+ Unsupported stock type %s (%d)
+ Tipo de stock non soportado %s (%d)
+
Model Selection
@@ -3222,6 +3496,71 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc
Create Job
Crear traballo
+
+
+ Fixture
+ Suxeición
+
+
+
+ Tool
+ Ferramenta
+
+
+
+ Operation
+ Operation
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Sólidos
+
+
+
+ Jobs
+ Traballos
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Caixa: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Cilindro: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Tipo de existencia non soportado
+
Path_MillFace
@@ -3244,6 +3583,24 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc
Toggle the Active State of the Operation
+
+ Path_Operation
+
+
+ None
+ Ningún
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3453,6 +3810,14 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc
Profile entire model, selected face(s) or selected edge(s)
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
@@ -3763,6 +4128,136 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Personalizar
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Liña
+
+
+
+ Offset
+ Separación
+
+
+
+ Spiral
+ Espiral
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ None
+ Ningún
+
+
+
+ Only
+ Only
+
+
+
+ First
+ First
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Planar
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -4015,6 +4510,183 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc
Create a Waterline Operation from a model
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ Esta operación require instalar OpenCamLib.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Personalizar
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Liña
+
+
+
+ Offset
+ Separación
+
+
+
+ Spiral
+ Espiral
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ None
+ Ningún
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Edita o aspecto das etiquetas de subxección
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Lonxitude por defecto de extensións.
+
+
+
+ List of features to extend.
+ Lista de características a estender.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ Cando habilita o bordo da extensión conecta combinando arames.
+
+
+
+ Uses the outline of the base geometry.
+ Usar a contorna da base xeométrica.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Edit PropertyBag
+
+
+
+ Create PropertyBag
+ Create PropertyBag
+
+
+
+ PropertyBag
+ PropertyBag
+
+
+
+ Creates an object which can be used to store reference properties.
+ Creates an object which can be used to store reference properties.
+
+
+
+ List of custom property groups
+ List of custom property groups
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hr.qm b/src/Mod/Path/Gui/Resources/translations/Path_hr.qm
index 523cd0f855..d08b344c22 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_hr.qm and b/src/Mod/Path/Gui/Resources/translations/Path_hr.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hr.ts b/src/Mod/Path/Gui/Resources/translations/Path_hr.ts
index 2072807b99..f9ed84b1f3 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_hr.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_hr.ts
@@ -241,6 +241,16 @@
The Z height of the hop
Z visina ovog skoka
+
+
+ Default length of extensions.
+ Zadana duljina proširenja/produženja.
+
+
+
+ List of features to extend.
+ Popis značajki koje treba proširiti.
+
Stop processing
@@ -271,6 +281,117 @@
The output location for the probe data to be written
Izlazno mjesto za podatke sonde da se napišu
+
+
+ The base geometry for this operation
+ Osnovna geometrija za ovu operaciju
+
+
+
+ Holds the calculated value for the StartDepth
+ Drži izračunatu vrijednost za Početnu Dubinu (StartDepth)
+
+
+
+ Holds the calculated value for the FinalDepth
+ Drži izračunatu vrijednost za Krajnju Dubinu (FinalDepth)
+
+
+
+ Holds the diameter of the tool
+ Drži promjer alata
+
+
+
+ Holds the max Z value of Stock
+ Drži vrijednost max Z za Osnovu
+
+
+
+ Holds the min Z value of Stock
+ Drži vrijednost min Z za Osnovu
+
+
+
+ Make False, to prevent operation from generating code
+ Postavite na netočno da spriječite generiranje koda
+
+
+
+ An optional comment for this Operation
+ Neobvezni komentar za ovu operaciju
+
+
+
+ User Assigned Label
+ Oznaka dodijeljena od korisnika
+
+
+
+ Operations Cycle Time Estimation
+ Procjena vremena ciklusa operacije
+
+
+
+ Base locations for this operation
+ Početna lokacija za ovu operaciju
+
+
+
+ Coolant mode for this operation
+ Način hlađenja za ovu operaciju
+
+
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Pokretanje dubine alata - prva dubina reza u Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Konačna dubina alata - najniža vrijednost u Z
+
+
+
+ Incremental Step Down of Tool
+ Postupno (inkrementalno) spuštanje alata
+
+
+
+ Maximum material removed on final pass.
+ Maksimalni odstranjeni materijal na završnom prolazu.
+
+
+
+ Rapid Safety Height between locations.
+ Sigurna visina brzog hoda između lokacija.
+
+
+
+ The start point of this path
+ Početna točka ove staze
+
+
+
+ Lower limit of the turning diameter
+ Donja granica okretnog promjera
+
+
+
+
+ Upper limit of the turning diameter.
+ Gornja granica okretnog promjera .
+
+
+
+
+ Coolant option for this operation
+ Opcija hlađenja za ovu operaciju
+
+
+
Additional base objects to be engraved
@@ -361,11 +482,6 @@
Fixture Offset Number
Pomak od učvrščenja
-
-
- Make False, to prevent operation from generating code
- Postavite na netočno da spriječite generiranje koda
-
Shape for bit shape
@@ -400,6 +516,11 @@
The gcode to be inserted
Gcode koji če biti umetnut
+
+
+ Angle of ramp.
+ Kut rampe.
+
Ramping Method
@@ -415,6 +536,36 @@
Custom feed rate
Korisnički prilagođena brzina pomicanja
+
+
+ Width of tags.
+ Širina oznake.
+
+
+
+ Height of tags.
+ Visina oznake.
+
+
+
+ Angle of tag plunge and ascent.
+ Kut spusta i uspona držeće trake.
+
+
+
+ Radius of the fillet for the tag.
+ Polumjer obruba za oznaku.
+
+
+
+ Locations of inserted holding tags
+ Lokacije umetnutih oznaka držača
+
+
+
+ IDs of disabled holding tags
+ ID-ovi onemogućenih oznaka držača
+
Incremental Drill depth before retracting to clear chips
@@ -632,16 +783,6 @@
-
-
- Start pocketing at center or boundary
- Započnite utor na sredini ili rubu
-
-
-
- Percent of cutter diameter to step over on each pass
- Postotak promjera glodala koji bi prelazio u svakom prolazu
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -652,6 +793,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Dodatni pomak koji se primjenjuje na operaciju. Smjer ovisi o operaciji.
+
+
+ Start pocketing at center or boundary
+ Započnite utor na sredini ili rubu
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Postotak promjera glodala koji bi prelazio u svakom prolazu
+
Angle of the zigzag pattern
@@ -676,6 +827,31 @@
+
+
+ The side of path to insert bones
+ Strana staze za umetanje kostiju
+
+
+
+ The style of bones
+ Forma kostiju
+
+
+
+ Bones that aren't dressed up
+ Kosti koje nisu dotjerane (dressed up)
+
+
+
+ The algorithm to determine the bone length
+ Algoritam za određivanje duljine kostiju
+
+
+
+ Dressup length if Incision == custom
+ Duljina odijevanja ako je rezanje == prilagođeno
+
Add Optional or Mandatory Stop to the program
@@ -746,6 +922,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ List grupa prilagođenih svojstava
+
The point file from the surface probing.
@@ -926,6 +1107,82 @@
The tool used by this controller
Alat korišten kod ovog upravljačkog sklopa
+
+
+ List of disabled features
+ Popis onemogućenih funkcija
+
+
+
+ The NC output file for this project
+ Izlazna NC datoteka za ovaj projekt
+
+
+
+ Select the Post Processor
+ Odaberite Post Processor
+
+
+
+ Last Time the Job was post-processed
+ Posljednji put posao je naknadno obrađen
+
+
+
+
+
+ An optional description for this job
+ Opcionalni opis za ovaj posao
+
+
+
+
+
+ Job Cycle Time Estimation
+ Procjena vremena radnog ciklusa
+
+
+
+ Solid object to be used as stock.
+ Objekt čvrstog tijela korišten kao osnova.
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ Razdjelite izlaz na više gcode datoteka
+
+
+
+
+
+ If multiple WCS, order the output this way
+ Ako je više WCS-a, naručite izlaz na ovaj način
+
+
+
+ The Work Coordinate Systems for the Job
+ Sustavi Radnih koordinata za ovaj posao
+
+
+
+ SetupSheet holding the settings for this job
+ Tabela podešavanja sadrži postavke za ovaj zadatak
+
+
+
+ The base objects for all operations
+ Osnovni objekti za sve operacije
+
+
+
+ Collection of all tool controllers for the job
+ Prikupljanje svih kontrolera alata za posao
+
Start cutting from the inside or outside
@@ -1021,6 +1278,11 @@
Didn't find job %s
Nisam našao zadatak %s
+
+
+ Illegal arc: Start and end radii not equal
+ Ilegalni luk: polumjer početka i kraja nije jednak
+
Legacy Tools not supported
@@ -1031,11 +1293,6 @@
Selected tool is not a drill
Odabrani alat nije za bušenje
-
-
- Illegal arc: Start and end radii not equal
- Ilegalni luk: polumjer početka i kraja nije jednak
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1120,11 +1377,6 @@
CCW
suprotno smjeru kazaljke sata
-
-
- List of disabled features
- Popis onemogućenih funkcija
-
Project Setup
@@ -1187,6 +1439,11 @@
Utils
Uslužni programi
+
+
+ List of disabled features
+ Popis onemogućenih funkcija
+
Choose a writable location for your toolbits
@@ -1338,14 +1595,6 @@
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Uredi držeće trake Dress-up
-
-
PathFeatureExtensions
@@ -1435,16 +1684,6 @@
PathJob
-
-
- Unsupported stock object %s
- Nije podržan objekt osnove %s
-
-
-
- Unsupported stock type %s (%d)
- Nije podržan tip osnove %s (%d)
-
Stock not from Base bound box!
@@ -1460,6 +1699,16 @@
Stock not a cylinder!
Osnova nije cilindar!
+
+
+ Unsupported stock object %s
+ Nije podržan objekt osnove %s
+
+
+
+ Unsupported stock type %s (%d)
+ Nije podržan tip osnove %s (%d)
+
The NC output file for this project
@@ -1494,28 +1743,6 @@
Solid object to be used as stock.
Objekt čvrstog tijela korišten kao osnova.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Razdjelite izlaz na više gcode datoteka
-
-
-
-
-
- If multiple WCS, order the output this way
- Ako je više WCS-a, naručite izlaz na ovaj način
-
-
-
- The Work Coordinate Systems for the Job
- Sustavi Radnih koordinata za ovaj posao
-
SetupSheet holding the settings for this job
@@ -1531,6 +1758,28 @@
Collection of all tool controllers for the job
Prikupljanje svih kontrolera alata za posao
+
+
+ The Work Coordinate Systems for the Job
+ Sustavi Radnih koordinata za ovaj posao
+
+
+
+ If multiple WCS, order the output this way
+ Ako je više WCS-a, naručite izlaz na ovaj način
+
+
+
+ Split output into multiple gcode files
+ Razdjelite izlaz na više gcode datoteka
+
+
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1574,132 +1823,6 @@
PathOp
-
-
- The base geometry for this operation
- Osnovna geometrija za ovu operaciju
-
-
-
- Holds the calculated value for the StartDepth
- Drži izračunatu vrijednost za Početnu Dubinu (StartDepth)
-
-
-
- Holds the calculated value for the FinalDepth
- Drži izračunatu vrijednost za Krajnju Dubinu (FinalDepth)
-
-
-
- Holds the diameter of the tool
- Drži promjer alata
-
-
-
- Holds the max Z value of Stock
- Drži vrijednost max Z za Osnovu
-
-
-
- Holds the min Z value of Stock
- Drži vrijednost min Z za Osnovu
-
-
-
- Make False, to prevent operation from generating code
- Postavite na netočno da spriječite generiranje koda
-
-
-
- An optional comment for this Operation
- Neobvezni komentar za ovu operaciju
-
-
-
- User Assigned Label
- Oznaka dodijeljena od korisnika
-
-
-
- Operations Cycle Time Estimation
- Procjena vremena ciklusa operacije
-
-
-
- Base locations for this operation
- Početna lokacija za ovu operaciju
-
-
-
- Coolant mode for this operation
- Način hlađenja za ovu operaciju
-
-
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Pokretanje dubine alata - prva dubina reza u Z
-
-
-
- Final Depth of Tool- lowest value in Z
- Konačna dubina alata - najniža vrijednost u Z
-
-
-
- Starting Depth internal use only for derived values
- Početna Dubina,samo za internu upotrebu za izvedene vrijednosti
-
-
-
- Incremental Step Down of Tool
- Postupno (inkrementalno) spuštanje alata
-
-
-
- Maximum material removed on final pass.
- Maksimalni odstranjeni materijal na završnom prolazu.
-
-
-
- The height needed to clear clamps and obstructions
- Visina potrebna za uklanjanje stezaljki i pričvršćivala
-
-
-
- Rapid Safety Height between locations.
- Sigurna visina brzog hoda između lokacija.
-
-
-
- The start point of this path
- Početna točka ove staze
-
-
-
- Make True, if specifying a Start Point
- Postavite na Točno, ako specificirate Početnu točku
-
-
-
- Lower limit of the turning diameter
- Donja granica okretnog promjera
-
-
-
-
- Upper limit of the turning diameter.
- Gornja granica okretnog promjera .
-
-
-
-
- Coolant option for this operation
- Opcija hlađenja za ovu operaciju
-
-
-
Edit
@@ -1777,11 +1900,137 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr
Pick Start Point
Odaberite početnu točku
+
+
+ Make False, to prevent operation from generating code
+ Postavite na netočno da spriječite generiranje koda
+
+
+
+ The base geometry for this operation
+ Osnovna geometrija za ovu operaciju
+
+
+
+ Holds the calculated value for the StartDepth
+ Drži izračunatu vrijednost za Početnu Dubinu (StartDepth)
+
+
+
+ Holds the calculated value for the FinalDepth
+ Drži izračunatu vrijednost za Krajnju Dubinu (FinalDepth)
+
+
+
+ Holds the diameter of the tool
+ Drži promjer alata
+
+
+
+ Holds the max Z value of Stock
+ Drži vrijednost max Z za Osnovu
+
+
+
+ Holds the min Z value of Stock
+ Drži vrijednost min Z za Osnovu
+
+
+
+ An optional comment for this Operation
+ Neobvezni komentar za ovu operaciju
+
+
+
+ User Assigned Label
+ Oznaka dodijeljena od korisnika
+
+
+
+ Base locations for this operation
+ Početna lokacija za ovu operaciju
+
+
+
+ Coolant mode for this operation
+ Način hlađenja za ovu operaciju
+
+
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Pokretanje dubine alata - prva dubina reza u Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Konačna dubina alata - najniža vrijednost u Z
+
+
+
+ Starting Depth internal use only for derived values
+ Početna Dubina,samo za internu upotrebu za izvedene vrijednosti
+
+
+
+ Incremental Step Down of Tool
+ Postupno (inkrementalno) spuštanje alata
+
+
+
+ Maximum material removed on final pass.
+ Maksimalni odstranjeni materijal na završnom prolazu.
+
+
+
+ The height needed to clear clamps and obstructions
+ Visina potrebna za uklanjanje stezaljki i pričvršćivala
+
+
+
+ Rapid Safety Height between locations.
+ Sigurna visina brzog hoda između lokacija.
+
+
+
+ The start point of this path
+ Početna točka ove staze
+
+
+
+ Make True, if specifying a Start Point
+ Postavite na Točno, ako specificirate Početnu točku
+
+
+
+ Lower limit of the turning diameter
+ Donja granica okretnog promjera
+
+
+
+
+ Upper limit of the turning diameter.
+ Gornja granica okretnog promjera .
+
+
+
+
+ Coolant option for this operation
+ Opcija hlađenja za ovu operaciju
+
+
+
Job Cycle Time Estimation
Procjena vremena radnog ciklusa
+
+
+ Operations Cycle Time Estimation
+ Procjena vremena ciklusa operacije
+
PathPlane
@@ -1848,29 +2097,6 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr
-
- PathPocketShape
-
-
- Default length of extensions.
- Zadana duljina proširenja/produženja.
-
-
-
- List of features to extend.
- Popis značajki koje treba proširiti.
-
-
-
- When enabled connected extension edges are combined to wires.
- Kad je omogućeno, povezani produžni rubovi kombiniraju se s žicama.
-
-
-
- Uses the outline of the base geometry.
- Koristi konturu geometrije baze.
-
-
PathProfile
@@ -1948,34 +2174,6 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Edit PropertyBag
-
-
-
- Create PropertyBag
- Create PropertyBag
-
-
-
- PropertyBag
- Torba za Vlasništvo
-
-
-
- Creates an object which can be used to store reference properties.
- Creates an object which can be used to store reference properties.
-
-
-
- List of custom property groups
- List grupa prilagođenih svojstava
-
-
PathSlot
@@ -3082,59 +3280,69 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr
Angle of ramp.
Kut rampe.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Spirala
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Prilagođeno
+
RampEntry Dress-up
Ulazna kosina (RampEntry) Dress-up
+
+
+ Please select one path object
+ Odaberite jedan objekt staze
+
+
+
+ The selected object is not a path
+ Odabrani objekt nije putanja staze
+
+
+
+ Please select a Profile object
+ Odaberite objekt profila
+
Path_DressupTag
-
-
- The base path to modify
- Osnovni staza za modifikaciju
-
-
-
- Width of tags.
- Širina oznake.
-
-
-
- Height of tags.
- Visina oznake.
-
-
-
- Angle of tag plunge and ascent.
- Kut spusta i uspona držeće trake.
-
-
-
- Radius of the fillet for the tag.
- Polumjer obruba za oznaku.
-
-
-
- Locations of inserted holding tags
- Lokacije umetnutih oznaka držača
-
-
-
- IDs of disabled holding tags
- ID-ovi onemogućenih oznaka držača
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Faktor koji određuje broj segmenata koji se koriste za približno zaobljene oznake.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Ne mogu umetnuti oznake držanja za ovu stazu - odaberite stazu profila
-
The selected object is not a path
@@ -3180,6 +3388,46 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr
Create Tag Dress-up
Napravi držeće trake Dress-up
+
+
+ The base path to modify
+ Osnovni staza za modifikaciju
+
+
+
+ Width of tags.
+ Širina oznake.
+
+
+
+ Height of tags.
+ Visina oznake.
+
+
+
+ Angle of tag plunge and ascent.
+ Kut spusta i uspona držeće trake.
+
+
+
+ Radius of the fillet for the tag.
+ Polumjer obruba za oznaku.
+
+
+
+ Locations of inserted holding tags
+ Lokacije umetnutih oznaka držača
+
+
+
+ IDs of disabled holding tags
+ ID-ovi onemogućenih oznaka držača
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Faktor koji određuje broj segmenata koji se koriste za približno zaobljene oznake.
+
No Base object found.
@@ -3200,6 +3448,11 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr
Base Path is empty.
Osnovna Staza je prazna.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Ne mogu umetnuti oznake držanja za ovu stazu - odaberite stazu profila
+
Path_DressupZCorrect
@@ -3297,6 +3550,19 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr
Graviranje operacije
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Izvezi predložak
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Izvezi zadatak staze kao predložak koji se može koristi za druge zadatke
+
+
Path_Helix
@@ -3393,6 +3659,16 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr
Exports Path Job as a template to be used for other jobs
Izvezi zadatak staze kao predložak koji se može koristi za druge zadatke
+
+
+ Edit
+ Uredi
+
+
+
+ Stock not a cylinder!
+ Osnova nije cilindar!
+
Edit Job
@@ -3413,6 +3689,16 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr
All Files (*.*)
Sve datoteke (*.*)
+
+
+ Unsupported stock object %s
+ Nije podržan objekt osnove %s
+
+
+
+ Unsupported stock type %s (%d)
+ Nije podržan tip osnove %s (%d)
+
Model Selection
@@ -3423,6 +3709,71 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr
Create Job
Stvori zadatak
+
+
+ Fixture
+ Učvršćenje
+
+
+
+ Tool
+ Alat
+
+
+
+ Operation
+ Operacija
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Tijela
+
+
+
+ Jobs
+ Poslovi
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Baza-/ + %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Kvadrat: %.2f X %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Cilindar: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Nije podržan tip osnove
+
Path_MillFace
@@ -3445,6 +3796,24 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr
Uključivanje / isključivanje aktivnog stanja operacije
+
+ Path_Operation
+
+
+ None
+ Prazno
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3656,6 +4025,14 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr
Profilirajte cijeli model, odabrana lica ili odabrane rubove
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ Torba za Vlasništvo
+
+
Path_Sanity
@@ -3978,6 +4355,136 @@ Broj linija
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Osnova
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Prilagođeno
+
+
+
+ Conventional
+ Konvencionalno
+
+
+
+ Climb
+ Uspon
+
+
+
+ Circular
+ Okruglo
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Linija
+
+
+
+ Offset
+ Pomak
+
+
+
+ Spiral
+ Spirala
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Zajedno
+
+
+
+ Individually
+ Pojedinačno
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ višestruki prolaz
+
+
+
+ None
+ Prazno
+
+
+
+ Only
+ Only
+
+
+
+ First
+ Prvi
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Planar
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -4242,6 +4749,183 @@ Broj linija
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ Ova operacija zahtijeva instaliranje OpenCamLib-a.
+
+
+
+ OCL Dropcutter
+ OCL Upuštajuće glodalo
+
+
+
+ Experimental
+ Eksperimentalno
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Osnova
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Prilagođeno
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Okruglo
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Linija
+
+
+
+ Offset
+ Pomak
+
+
+
+ Spiral
+ Spirala
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Konvencionalno
+
+
+
+ Climb
+ Uspon
+
+
+
+ None
+ Prazno
+
+
+
+ Collectively
+ Zajedno
+
+
+
+ Individually
+ Pojedinačno
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ višestruki prolaz
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Uredi držeće trake Dress-up
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Zadana duljina proširenja/produženja.
+
+
+
+ List of features to extend.
+ Popis značajki koje treba proširiti.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ Kad je omogućeno, povezani produžni rubovi kombiniraju se s žicama.
+
+
+
+ Uses the outline of the base geometry.
+ Koristi konturu geometrije baze.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Edit PropertyBag
+
+
+
+ Create PropertyBag
+ Create PropertyBag
+
+
+
+ PropertyBag
+ Torba za Vlasništvo
+
+
+
+ Creates an object which can be used to store reference properties.
+ Creates an object which can be used to store reference properties.
+
+
+
+ List of custom property groups
+ List grupa prilagođenih svojstava
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hu.qm b/src/Mod/Path/Gui/Resources/translations/Path_hu.qm
index be9737424a..37f86e1a11 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_hu.qm and b/src/Mod/Path/Gui/Resources/translations/Path_hu.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hu.ts b/src/Mod/Path/Gui/Resources/translations/Path_hu.ts
index a726550603..b9b570399d 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_hu.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_hu.ts
@@ -213,6 +213,16 @@
The Z height of the hop
Visszahúzási sík magassága
+
+
+ Default length of extensions.
+ Meghosszabbítások alapértelmezett hossza.
+
+
+
+ List of features to extend.
+ Tulajdonságok listája a meghosszabbításhoz.
+
Stop processing
@@ -243,6 +253,111 @@
The output location for the probe data to be written
A letapogató adatok írható kimeneti helye
+
+
+ The base geometry for this operation
+ Alap geometria ehhez a művelethez
+
+
+
+ Holds the calculated value for the StartDepth
+ Megtartja a kiindulási-mélység számított értékét
+
+
+
+ Holds the calculated value for the FinalDepth
+ Megtartja a végső-mélység számított értékét
+
+
+
+ Holds the diameter of the tool
+ Megtartja a szerszám átmérőjét
+
+
+
+ Holds the max Z value of Stock
+ Tartja az alaptest max Z értékét
+
+
+
+ Holds the min Z value of Stock
+ Tartja az alaptest min Z értékét
+
+
+
+ Make False, to prevent operation from generating code
+ Állítsa hamisra annak megakadályozására, hogy a művelet, kódot generálhasson
+
+
+
+ An optional comment for this Operation
+ Választható megjegyzés ehhez a művelethez
+
+
+
+ User Assigned Label
+ Felhasználó által hozzárendelt címke
+
+
+
+ Operations Cycle Time Estimation
+ Műveleti ciklus időbecslése
+
+
+
+ Base locations for this operation
+ Kiinduló hely ehhez a művelethez
+
+
+
+ Coolant mode for this operation
+ Hűtőközeg mód ehhez a művelethez
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ A szerszám első vágási mélysége - Indítási mélység a Z tengelyen
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Vég-fúrásmélység a Z tengelyen
+
+
+
+ Incremental Step Down of Tool
+ Visszaléptetés növekménye ehhez szerszámhoz
+
+
+
+ Maximum material removed on final pass.
+ Az utolsó munkafázisnál maximálisan eltávolítandó anyag.
+
+
+
+ Rapid Safety Height between locations.
+ Gyorsmenet biztonsági magassága a helyek között.
+
+
+
+ The start point of this path
+ Ennek a szerszámpályának az induló pontja
+
+
+
+ Lower limit of the turning diameter
+ Az esztergálási átmérő alsó határa
+
+
+
+ Upper limit of the turning diameter.
+ Az esztergálási átmérő felső határa.
+
+
+
+ Coolant option for this operation
+ Hűtőközeg beállítás ehhez a művelethez
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
Koordináta rendszer kiválasztása
-
-
- Make False, to prevent operation from generating code
- Állítsa hamisra annak megakadályozására, hogy a művelet, kódot generálhasson
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
A beillesztendő gcode
+
+
+ Angle of ramp.
+ Rámpa szöge.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Egyéni előtolási sebesség
+
+
+ Width of tags.
+ Címkék szélessége.
+
+
+
+ Height of tags.
+ Címkék magassága.
+
+
+
+ Angle of tag plunge and ascent.
+ Címke pecsét és emelkedés szöge.
+
+
+
+ Radius of the fillet for the tag.
+ Címke lekerekítési sugara.
+
+
+
+ Locations of inserted holding tags
+ A beszúrt tartás címkék helye
+
+
+
+ IDs of disabled holding tags
+ A letiltott tartó címkék azonosítói
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Kifejezés az új műveletek szintmagasságára.
-
-
- Start pocketing at center or boundary
- Zseb létrehozása a határvonal közepénél
-
-
-
- Percent of cutter diameter to step over on each pass
- Maró átmérő százaléka mellyel átlép minden elhaladáskor
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Extra eltolása a művelethez. Iránya a függ a művelettől.
+
+
+ Start pocketing at center or boundary
+ Zseb létrehozása a határvonal közepénél
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Maró átmérő százaléka mellyel átlép minden elhaladáskor
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Megkísérli, hogy elkerülje a felesleges visszahúzásokat.
+
+
+ The side of path to insert bones
+ A szerszámpálya oldala a halszálkák beillesztéséhez
+
+
+
+ The style of bones
+ Halszálkák stílusa
+
+
+
+ Bones that aren't dressed up
+ Halszálkák melyek nincsenek felépítve
+
+
+
+ The algorithm to determine the bone length
+ Algoritmus a halszálka hosszának meghatározásához
+
+
+
+ Dressup length if Incision == custom
+ Felépítés hossza ha metszéssel == egyéni
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
A jitter véletlenszerűségének magértéke
+
+
+ List of custom property groups
+ A felhasználó által definiált tárgycsoportok listája
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
Ehhez a vezérlőhöz használt eszköz
+
+
+ List of disabled features
+ Kikapcsolt funkciók listája
+
+
+
+ The NC output file for this project
+ Ennek a projekt témának a kimeneti NC fájlja
+
+
+
+ Select the Post Processor
+ Válassza ki az utólagos végrehajtót
+
+
+
+ Last Time the Job was post-processed
+ A feladat utolsó utófeldolgozása
+
+
+
+ An optional description for this job
+ A feladat választható leírása
+
+
+
+ Job Cycle Time Estimation
+ Feladatciklus időbecslése
+
+
+
+ Solid object to be used as stock.
+ Alaptestként használt szilárd test.
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ Kimenet felosztása több gcode fájlra
+
+
+
+ If multiple WCS, order the output this way
+ Ha több WCS van, rendezze el a kimenetet ily módon
+
+
+
+ The Work Coordinate Systems for the Job
+ A feladat munkakoordináta-rendszerei
+
+
+
+ SetupSheet holding the settings for this job
+ Ehhez a munkához tartozó beállításokat tartalmazó beállítólap
+
+
+
+ The base objects for all operations
+ Az alap objektum az összes művelethez
+
+
+
+ Collection of all tool controllers for the job
+ A feladathoz szükséges összes vezérlőeszköz gyűjteménye
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
Nem találja a %s feladatot
+
+
+ Illegal arc: Start and end radii not equal
+ Hibás ív: A kezdő és záró sugár nem egyenlő
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
A kijelölt eszköz nem fúró
-
-
- Illegal arc: Start and end radii not equal
- Hibás ív: A kezdő és záró sugár nem egyenlő
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
Órajárással ellentétes irány
-
-
- List of disabled features
- Kikapcsolt funkciók listája
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Munkaeszközök
+
+
+ List of disabled features
+ Kikapcsolt funkciók listája
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Sorjázási mintát hoz létre élek mentén vagy felületek körül
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- HoldingTags felépítés szerkesztése
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Nem támogatott alaptest tárgy %s
-
-
-
- Unsupported stock type %s (%d)
- Nem támogatott alaptest típus %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
Alaptest nem egy henger!
+
+
+ Unsupported stock object %s
+ Nem támogatott alaptest tárgy %s
+
+
+
+ Unsupported stock type %s (%d)
+ Nem támogatott alaptest típus %s (%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Alaptestként használt szilárd test.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Kimenet felosztása több gcode fájlra
-
-
-
- If multiple WCS, order the output this way
- Ha több WCS van, rendezze el a kimenetet ily módon
-
-
-
- The Work Coordinate Systems for the Job
- A feladat munkakoordináta-rendszerei
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
A feladathoz szükséges összes vezérlőeszköz gyűjteménye
+
+
+ The Work Coordinate Systems for the Job
+ A feladat munkakoordináta-rendszerei
+
+
+
+ If multiple WCS, order the output this way
+ Ha több WCS van, rendezze el a kimenetet ily módon
+
+
+
+ Split output into multiple gcode files
+ Kimenet felosztása több gcode fájlra
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- Alap geometria ehhez a művelethez
-
-
-
- Holds the calculated value for the StartDepth
- Megtartja a kiindulási-mélység számított értékét
-
-
-
- Holds the calculated value for the FinalDepth
- Megtartja a végső-mélység számított értékét
-
-
-
- Holds the diameter of the tool
- Megtartja a szerszám átmérőjét
-
-
-
- Holds the max Z value of Stock
- Tartja az alaptest max Z értékét
-
-
-
- Holds the min Z value of Stock
- Tartja az alaptest min Z értékét
-
-
-
- Make False, to prevent operation from generating code
- Állítsa hamisra annak megakadályozására, hogy a művelet, kódot generálhasson
-
-
-
- An optional comment for this Operation
- Választható megjegyzés ehhez a művelethez
-
-
-
- User Assigned Label
- Felhasználó által hozzárendelt címke
-
-
-
- Operations Cycle Time Estimation
- Műveleti ciklus időbecslése
-
-
-
- Base locations for this operation
- Kiinduló hely ehhez a művelethez
-
-
-
- Coolant mode for this operation
- Hűtőközeg mód ehhez a művelethez
-
-
-
- Starting Depth of Tool- first cut depth in Z
- A szerszám első vágási mélysége - Indítási mélység a Z tengelyen
-
-
-
- Final Depth of Tool- lowest value in Z
- Vég-fúrásmélység a Z tengelyen
-
-
-
- Starting Depth internal use only for derived values
- Kezdeti mélység belső használatára, csak származtatott értékekhez használja
-
-
-
- Incremental Step Down of Tool
- Visszaléptetés növekménye ehhez szerszámhoz
-
-
-
- Maximum material removed on final pass.
- Az utolsó munkafázisnál maximálisan eltávolítandó anyag.
-
-
-
- The height needed to clear clamps and obstructions
- Kiindulási magasság beállítása
-
-
-
- Rapid Safety Height between locations.
- Gyorsmenet biztonsági magassága a helyek között.
-
-
-
- The start point of this path
- Ennek a szerszámpályának az induló pontja
-
-
-
- Make True, if specifying a Start Point
- Állítsa igazra, ha egy kiinduló pontot ad meg
-
-
-
- Lower limit of the turning diameter
- Az esztergálási átmérő alsó határa
-
-
-
- Upper limit of the turning diameter.
- Az esztergálási átmérő felső határa.
-
-
-
- Coolant option for this operation
- Hűtőközeg beállítás ehhez a művelethez
-
Edit
@@ -1668,11 +1785,131 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy
Pick Start Point
Válasszon indulási pontot
+
+
+ Make False, to prevent operation from generating code
+ Állítsa hamisra annak megakadályozására, hogy a művelet, kódot generálhasson
+
+
+
+ The base geometry for this operation
+ Alap geometria ehhez a művelethez
+
+
+
+ Holds the calculated value for the StartDepth
+ Megtartja a kiindulási-mélység számított értékét
+
+
+
+ Holds the calculated value for the FinalDepth
+ Megtartja a végső-mélység számított értékét
+
+
+
+ Holds the diameter of the tool
+ Megtartja a szerszám átmérőjét
+
+
+
+ Holds the max Z value of Stock
+ Tartja az alaptest max Z értékét
+
+
+
+ Holds the min Z value of Stock
+ Tartja az alaptest min Z értékét
+
+
+
+ An optional comment for this Operation
+ Választható megjegyzés ehhez a művelethez
+
+
+
+ User Assigned Label
+ Felhasználó által hozzárendelt címke
+
+
+
+ Base locations for this operation
+ Kiinduló hely ehhez a művelethez
+
+
+
+ Coolant mode for this operation
+ Hűtőközeg mód ehhez a művelethez
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ A szerszám első vágási mélysége - Indítási mélység a Z tengelyen
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Vég-fúrásmélység a Z tengelyen
+
+
+
+ Starting Depth internal use only for derived values
+ Kezdeti mélység belső használatára, csak származtatott értékekhez használja
+
+
+
+ Incremental Step Down of Tool
+ Visszaléptetés növekménye ehhez szerszámhoz
+
+
+
+ Maximum material removed on final pass.
+ Az utolsó munkafázisnál maximálisan eltávolítandó anyag.
+
+
+
+ The height needed to clear clamps and obstructions
+ Kiindulási magasság beállítása
+
+
+
+ Rapid Safety Height between locations.
+ Gyorsmenet biztonsági magassága a helyek között.
+
+
+
+ The start point of this path
+ Ennek a szerszámpályának az induló pontja
+
+
+
+ Make True, if specifying a Start Point
+ Állítsa igazra, ha egy kiinduló pontot ad meg
+
+
+
+ Lower limit of the turning diameter
+ Az esztergálási átmérő alsó határa
+
+
+
+ Upper limit of the turning diameter.
+ Az esztergálási átmérő felső határa.
+
+
+
+ Coolant option for this operation
+ Hűtőközeg beállítás ehhez a művelethez
+
Job Cycle Time Estimation
Feladatciklus időbecslése
+
+
+ Operations Cycle Time Estimation
+ Műveleti ciklus időbecslése
+
PathPlane
@@ -1735,29 +1972,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy
A kiválasztott felület(ek) ZMin alatti végső mélysége.
-
- PathPocketShape
-
-
- Default length of extensions.
- Meghosszabbítások alapértelmezett hossza.
-
-
-
- List of features to extend.
- Tulajdonságok listája a meghosszabbításhoz.
-
-
-
- When enabled connected extension edges are combined to wires.
- Ha az engedélyezett akkor a csatlakoztatott hosszabbított éleket vezetékekké fűzi.
-
-
-
- Uses the outline of the base geometry.
- Használja az alap geometria körvonalát.
-
-
PathProfile
@@ -1831,34 +2045,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy
A nyitott élekre ellenőrizze a művelet végső mélységét.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Tulajdonságok gyűjteményének szerkesztése
-
-
-
- Create PropertyBag
- Tulajdonsággyűjtemény létrehozása
-
-
-
- PropertyBag
- Vágószerszám attribútumtartály
-
-
-
- Creates an object which can be used to store reference properties.
- Létrehoz egy tárgyat, amely referenciatulajdonságok tárolására használható.
-
-
-
- List of custom property groups
- A felhasználó által definiált tárgycsoportok listája
-
-
PathSlot
@@ -2887,59 +3073,69 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy
Angle of ramp.
Rámpa szöge.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Csigavonal
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Egyéni
+
RampEntry Dress-up
Szerszám pálya megváltoztatás
+
+
+ Please select one path object
+ Kérem jelöljön ki egy pálya objektumot
+
+
+
+ The selected object is not a path
+ A kijelölt objektum nem pálya útvonal
+
+
+
+ Please select a Profile object
+ Kérem válasszon egy profil objektumot
+
Path_DressupTag
-
-
- The base path to modify
- A megváltoztatni kívánt alap pálya útvonal
-
-
-
- Width of tags.
- Címkék szélessége.
-
-
-
- Height of tags.
- Címkék magassága.
-
-
-
- Angle of tag plunge and ascent.
- Címke pecsét és emelkedés szöge.
-
-
-
- Radius of the fillet for the tag.
- Címke lekerekítési sugara.
-
-
-
- Locations of inserted holding tags
- A beszúrt tartás címkék helye
-
-
-
- IDs of disabled holding tags
- A letiltott tartó címkék azonosítói
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- A kerekített címkék közelítésére használt szegmensek #számát meghatározó tényező.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Nem lehet beszúrni ezt a tartó címkét ehhez az útvonalhoz - kérjük, válassza ki a profil elérési útját
-
The selected object is not a path
@@ -2985,6 +3181,46 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy
Create Tag Dress-up
Címke megváltoztatás létrehozás
+
+
+ The base path to modify
+ A megváltoztatni kívánt alap pálya útvonal
+
+
+
+ Width of tags.
+ Címkék szélessége.
+
+
+
+ Height of tags.
+ Címkék magassága.
+
+
+
+ Angle of tag plunge and ascent.
+ Címke pecsét és emelkedés szöge.
+
+
+
+ Radius of the fillet for the tag.
+ Címke lekerekítési sugara.
+
+
+
+ Locations of inserted holding tags
+ A beszúrt tartás címkék helye
+
+
+
+ IDs of disabled holding tags
+ A letiltott tartó címkék azonosítói
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ A kerekített címkék közelítésére használt szegmensek #számát meghatározó tényező.
+
No Base object found.
@@ -3005,6 +3241,11 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy
Base Path is empty.
Alap útvonal üres.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Nem lehet beszúrni ezt a tartó címkét ehhez az útvonalhoz - kérjük, válassza ki a profil elérési útját
+
Path_DressupZCorrect
@@ -3098,6 +3339,19 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy
Gravírozási műveletek
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Sablon exportálás
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Munka-útvonal exportja sablonként, felhasználható más munkákhoz
+
+
Path_Helix
@@ -3194,6 +3448,16 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy
Exports Path Job as a template to be used for other jobs
Munka-útvonal exportja sablonként, felhasználható más munkákhoz
+
+
+ Edit
+ Szerkesztés
+
+
+
+ Stock not a cylinder!
+ Alaptest nem egy henger!
+
Edit Job
@@ -3214,6 +3478,16 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy
All Files (*.*)
Összes fájl (*.*)
+
+
+ Unsupported stock object %s
+ Nem támogatott alaptest tárgy %s
+
+
+
+ Unsupported stock type %s (%d)
+ Nem támogatott alaptest típus %s (%d)
+
Model Selection
@@ -3224,6 +3498,71 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy
Create Job
Feladat létrehozás
+
+
+ Fixture
+ Nullapont eltolás
+
+
+
+ Tool
+ Eszköz
+
+
+
+ Operation
+ Művelet
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Szilárd testek
+
+
+
+ Jobs
+ Feladatok
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Kiindulás -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Négyzet: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Henger: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Nem támogatott alaptest típus
+
Path_MillFace
@@ -3246,6 +3585,24 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy
A művelet aktív állapotának átkapcsolása
+
+ Path_Operation
+
+
+ None
+ Egyik sem
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3455,6 +3812,14 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy
Használja ki a teljes modellt, jelölje ki a felülete(ke)t vagy a kijelölt él(ek)et
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
@@ -3765,6 +4130,136 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy
Path_Surface
+
+
+ BaseBoundBox
+ Alaphatároló doboz
+
+
+
+ Stock
+ Készlet
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Egyéni
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ Circular
+ Körkörös
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Vonal
+
+
+
+ Offset
+ Eltolás
+
+
+
+ Spiral
+ Spirál
+
+
+
+ ZigZag
+ Cikcakk
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Közösen
+
+
+
+ Individually
+ Egyénileg
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ None
+ Egyik sem
+
+
+
+ Only
+ Only
+
+
+
+ First
+ First
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Síkbeli
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -4017,6 +4512,183 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy
Vízvonal-művelet létrehozása modellből
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ Ehhez a művelethez OpenCamLib kell telepíteni.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ Alaphatároló doboz
+
+
+
+ Stock
+ Készlet
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Egyéni
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Körkörös
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Vonal
+
+
+
+ Offset
+ Eltolás
+
+
+
+ Spiral
+ Spirál
+
+
+
+ ZigZag
+ Cikcakk
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ None
+ Egyik sem
+
+
+
+ Collectively
+ Közösen
+
+
+
+ Individually
+ Egyénileg
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ HoldingTags felépítés szerkesztése
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Meghosszabbítások alapértelmezett hossza.
+
+
+
+ List of features to extend.
+ Tulajdonságok listája a meghosszabbításhoz.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ Ha az engedélyezett akkor a csatlakoztatott hosszabbított éleket vezetékekké fűzi.
+
+
+
+ Uses the outline of the base geometry.
+ Használja az alap geometria körvonalát.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Tulajdonságok gyűjteményének szerkesztése
+
+
+
+ Create PropertyBag
+ Tulajdonsággyűjtemény létrehozása
+
+
+
+ PropertyBag
+ Vágószerszám attribútumtartály
+
+
+
+ Creates an object which can be used to store reference properties.
+ Létrehoz egy tárgyat, amely referenciatulajdonságok tárolására használható.
+
+
+
+ List of custom property groups
+ A felhasználó által definiált tárgycsoportok listája
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_id.qm b/src/Mod/Path/Gui/Resources/translations/Path_id.qm
index 02fb0f3df9..5a100d006f 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_id.qm and b/src/Mod/Path/Gui/Resources/translations/Path_id.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_id.ts b/src/Mod/Path/Gui/Resources/translations/Path_id.ts
index 86a5455b6a..d7c8047e12 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_id.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_id.ts
@@ -213,6 +213,16 @@
The Z height of the hop
Tinggi Z dari hop
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
Stop processing
@@ -243,6 +253,111 @@
The output location for the probe data to be written
The output location for the probe data to be written
+
+
+ The base geometry for this operation
+ Geometri dasar untuk operasi ini
+
+
+
+ Holds the calculated value for the StartDepth
+ Pegang nilai yang dihitung untuk StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Pegang nilai yang dihitung untuk FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ Make False, to prevent operation from generating code
+ Make False, to prevent operation from generating code
+
+
+
+ An optional comment for this Operation
+ Komentar opsional untuk Operasi ini
+
+
+
+ User Assigned Label
+ Label yang Ditugaskan Pengguna
+
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
+
+
+ Base locations for this operation
+ Lokasi dasar untuk operasi ini
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Kedalaman Kedalaman Alat-potong pertama di Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Kedalaman Nilai Tool-terendah di Z
+
+
+
+ Incremental Step Down of Tool
+ Langkah Tambahan dari Alat
+
+
+
+ Maximum material removed on final pass.
+ Bahan maksimal dilepas pada pass terakhir.
+
+
+
+ Rapid Safety Height between locations.
+ Rapid Safety Height between locations.
+
+
+
+ The start point of this path
+ Awal titik ini jalan
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
Nomor Offset Fixture
-
-
- Make False, to prevent operation from generating code
- Make False, to prevent operation from generating code
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
Kode gantung yang akan dimasukkan
+
+
+ Angle of ramp.
+ Sudut jalan
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Custom feed rate
+
+
+ Width of tags.
+ Lebar tag.
+
+
+
+ Height of tags.
+ Tinggi tag
+
+
+
+ Angle of tag plunge and ascent.
+ Sudut tag terjun dan pendakian.
+
+
+
+ Radius of the fillet for the tag.
+ Radius fillet untuk tag .
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expression used for StepDown of new operations.
-
-
- Start pocketing at center or boundary
- Mulai mengantongi di tengah atau batas
-
-
-
- Percent of cutter diameter to step over on each pass
- Persentase diameter pemotong untuk mengimbangi setiap lintasan
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Extra offset untuk diterapkan pada operasi. Arah adalah tergantung operasi.
+
+
+ Start pocketing at center or boundary
+ Mulai mengantongi di tengah atau batas
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Persentase diameter pemotong untuk mengimbangi setiap lintasan
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Attempts to avoid unnecessary retractions.
+
+
+ The side of path to insert bones
+ Sisi jalan untuk menyisipkan tulang
+
+
+
+ The style of bones
+ The style of bones
+
+
+
+ Bones that aren't dressed up
+ Tulang yang tidak didandani
+
+
+
+ The algorithm to determine the bone length
+ Algoritma untuk menentukan panjang tulang
+
+
+
+ Dressup length if Incision == custom
+ Dressup panjang jika Incision == custom
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ List of custom property groups
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
Alat yang digunakan oleh pengontrol ini
+
+
+ List of disabled features
+ Daftar fitur yang tidak dilengkapi
+
+
+
+ The NC output file for this project
+ File keluaran NC untuk proyek ini
+
+
+
+ Select the Post Processor
+ Pilih Post Processor
+
+
+
+ Last Time the Job was post-processed
+ Last Time the Job was post-processed
+
+
+
+ An optional description for this job
+ An optional description for this job
+
+
+
+ Job Cycle Time Estimation
+ Job Cycle Time Estimation
+
+
+
+ Solid object to be used as stock.
+ Objek padat untuk dijadikan stock
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ SetupSheet holding the settings for this job
+ SetupSheet memegang pengaturan untuk pekerjaan ini
+
+
+
+ The base objects for all operations
+ The base objects for all operations
+
+
+
+ Collection of all tool controllers for the job
+ Collection of all tool controllers for the job
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
Tidak menemukan pekerjaan%s
+
+
+ Illegal arc: Start and end radii not equal
+ Illegal arc: Start and end radii not equal
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
Selected tool is not a drill
-
-
- Illegal arc: Start and end radii not equal
- Illegal arc: Start and end radii not equal
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
CCW
-
-
- List of disabled features
- Daftar fitur yang tidak dilengkapi
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utils
+
+
+ List of disabled features
+ Daftar fitur yang tidak dilengkapi
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Creates a Deburr Path along Edges or around Faces
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Edit HoldingTags Dress-up
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Objek stok tidak didukung % s
-
-
-
- Unsupported stock type %s (%d)
- Tidak didukung saham jenis % s ( % d )
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
Stok bukan silinder!
+
+
+ Unsupported stock object %s
+ Objek stok tidak didukung % s
+
+
+
+ Unsupported stock type %s (%d)
+ Tidak didukung saham jenis % s ( % d )
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Objek padat untuk dijadikan stock
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Split output into multiple gcode files
-
-
-
- If multiple WCS, order the output this way
- If multiple WCS, order the output this way
-
-
-
- The Work Coordinate Systems for the Job
- The Work Coordinate Systems for the Job
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Collection of all tool controllers for the job
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- Geometri dasar untuk operasi ini
-
-
-
- Holds the calculated value for the StartDepth
- Pegang nilai yang dihitung untuk StartDepth
-
-
-
- Holds the calculated value for the FinalDepth
- Pegang nilai yang dihitung untuk FinalDepth
-
-
-
- Holds the diameter of the tool
- Holds the diameter of the tool
-
-
-
- Holds the max Z value of Stock
- Holds the max Z value of Stock
-
-
-
- Holds the min Z value of Stock
- Holds the min Z value of Stock
-
-
-
- Make False, to prevent operation from generating code
- Make False, to prevent operation from generating code
-
-
-
- An optional comment for this Operation
- Komentar opsional untuk Operasi ini
-
-
-
- User Assigned Label
- Label yang Ditugaskan Pengguna
-
-
-
- Operations Cycle Time Estimation
- Operations Cycle Time Estimation
-
-
-
- Base locations for this operation
- Lokasi dasar untuk operasi ini
-
-
-
- Coolant mode for this operation
- Coolant mode for this operation
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Kedalaman Kedalaman Alat-potong pertama di Z
-
-
-
- Final Depth of Tool- lowest value in Z
- Kedalaman Nilai Tool-terendah di Z
-
-
-
- Starting Depth internal use only for derived values
- Starting Depth internal use only for derived values
-
-
-
- Incremental Step Down of Tool
- Langkah Tambahan dari Alat
-
-
-
- Maximum material removed on final pass.
- Bahan maksimal dilepas pada pass terakhir.
-
-
-
- The height needed to clear clamps and obstructions
- The height needed to clear clamps and obstructions
-
-
-
- Rapid Safety Height between locations.
- Rapid Safety Height between locations.
-
-
-
- The start point of this path
- Awal titik ini jalan
-
-
-
- Make True, if specifying a Start Point
- Buat Benar, jika menentukan Titik Awal
-
-
-
- Lower limit of the turning diameter
- Lower limit of the turning diameter
-
-
-
- Upper limit of the turning diameter.
- Upper limit of the turning diameter.
-
-
-
- Coolant option for this operation
- Coolant option for this operation
-
Edit
@@ -1668,11 +1785,131 @@ If it is necessary to set the FinalDepth manually please select a different oper
Pick Start Point
Pilih Start Point
+
+
+ Make False, to prevent operation from generating code
+ Make False, to prevent operation from generating code
+
+
+
+ The base geometry for this operation
+ Geometri dasar untuk operasi ini
+
+
+
+ Holds the calculated value for the StartDepth
+ Pegang nilai yang dihitung untuk StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Pegang nilai yang dihitung untuk FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ An optional comment for this Operation
+ Komentar opsional untuk Operasi ini
+
+
+
+ User Assigned Label
+ Label yang Ditugaskan Pengguna
+
+
+
+ Base locations for this operation
+ Lokasi dasar untuk operasi ini
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Kedalaman Kedalaman Alat-potong pertama di Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Kedalaman Nilai Tool-terendah di Z
+
+
+
+ Starting Depth internal use only for derived values
+ Starting Depth internal use only for derived values
+
+
+
+ Incremental Step Down of Tool
+ Langkah Tambahan dari Alat
+
+
+
+ Maximum material removed on final pass.
+ Bahan maksimal dilepas pada pass terakhir.
+
+
+
+ The height needed to clear clamps and obstructions
+ The height needed to clear clamps and obstructions
+
+
+
+ Rapid Safety Height between locations.
+ Rapid Safety Height between locations.
+
+
+
+ The start point of this path
+ Awal titik ini jalan
+
+
+
+ Make True, if specifying a Start Point
+ Buat Benar, jika menentukan Titik Awal
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Job Cycle Time Estimation
Job Cycle Time Estimation
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
PathPlane
@@ -1735,29 +1972,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Final depth set below ZMin of face(s) selected.
-
- PathPocketShape
-
-
- Default length of extensions.
- Default length of extensions.
-
-
-
- List of features to extend.
- List of features to extend.
-
-
-
- When enabled connected extension edges are combined to wires.
- When enabled connected extension edges are combined to wires.
-
-
-
- Uses the outline of the base geometry.
- Uses the outline of the base geometry.
-
-
PathProfile
@@ -1831,34 +2045,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
For open edges, verify Final Depth for this operation.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Edit PropertyBag
-
-
-
- Create PropertyBag
- Create PropertyBag
-
-
-
- PropertyBag
- PropertyBag
-
-
-
- Creates an object which can be used to store reference properties.
- Creates an object which can be used to store reference properties.
-
-
-
- List of custom property groups
- List of custom property groups
-
-
PathSlot
@@ -2883,59 +3069,69 @@ If it is necessary to set the FinalDepth manually please select a different oper
Angle of ramp.
Sudut jalan
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Spiral
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Adat
+
RampEntry Dress-up
RampEntry Dress-up
+
+
+ Please select one path object
+ Please select one path object
+
+
+
+ The selected object is not a path
+ The selected object is not a path
+
+
+
+ Please select a Profile object
+ Silahkan pilih objek Profile
+
Path_DressupTag
-
-
- The base path to modify
- Basis path untuk memodifikasi
-
-
-
- Width of tags.
- Lebar tag.
-
-
-
- Height of tags.
- Tinggi tag
-
-
-
- Angle of tag plunge and ascent.
- Sudut tag terjun dan pendakian.
-
-
-
- Radius of the fillet for the tag.
- Radius fillet untuk tag .
-
-
-
- Locations of inserted holding tags
- Locations of inserted holding tags
-
-
-
- IDs of disabled holding tags
- IDs of disabled holding tags
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Factor determining the # of segments used to approximate rounded tags.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Cannot insert holding tags for this path - please select a Profile path
-
The selected object is not a path
@@ -2981,6 +3177,46 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Tag Dress-up
Buat Tag Dress-up
+
+
+ The base path to modify
+ Basis path untuk memodifikasi
+
+
+
+ Width of tags.
+ Lebar tag.
+
+
+
+ Height of tags.
+ Tinggi tag
+
+
+
+ Angle of tag plunge and ascent.
+ Sudut tag terjun dan pendakian.
+
+
+
+ Radius of the fillet for the tag.
+ Radius fillet untuk tag .
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Factor determining the # of segments used to approximate rounded tags.
+
No Base object found.
@@ -3001,6 +3237,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Base Path is empty.
Jalur dasar kosong.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Cannot insert holding tags for this path - please select a Profile path
+
Path_DressupZCorrect
@@ -3094,6 +3335,19 @@ If it is necessary to set the FinalDepth manually please select a different oper
Engraving Operations
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Template Ekspor
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Jalur Ekspor Pekerjaan sebagai template yang akan digunakan untuk pekerjaan lain
+
+
Path_Helix
@@ -3191,6 +3445,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
Exports Path Job as a template to be used for other jobs
Jalur Ekspor Pekerjaan sebagai template yang akan digunakan untuk pekerjaan lain
+
+
+ Edit
+ Edit
+
+
+
+ Stock not a cylinder!
+ Stok bukan silinder!
+
Edit Job
@@ -3211,6 +3475,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
All Files (*.*)
All Files (*.*)
+
+
+ Unsupported stock object %s
+ Objek stok tidak didukung % s
+
+
+
+ Unsupported stock type %s (%d)
+ Tidak didukung saham jenis % s ( % d )
+
Model Selection
@@ -3221,6 +3495,71 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Job
Buat pekerjaan
+
+
+ Fixture
+ Fitting
+
+
+
+ Tool
+ Tool
+
+
+
+ Operation
+ Operation
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Padat
+
+
+
+ Jobs
+ Jobs
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Base - / + % .2f / % .2f % .2f / % .2f % .2f / % .2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Kotak: % .2f x % .2f x % .2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Silinder: % .2f x % .2f
+
+
+
+ Unsupported stock type
+ Tidak didukung saham jenis
+
Path_MillFace
@@ -3243,6 +3582,24 @@ If it is necessary to set the FinalDepth manually please select a different oper
Toggle the Active State of the Operation
+
+ Path_Operation
+
+
+ None
+ Tidak ada
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3452,6 +3809,14 @@ If it is necessary to set the FinalDepth manually please select a different oper
Profile entire model, selected face(s) or selected edge(s)
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
@@ -3762,6 +4127,136 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Adat
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Garis
+
+
+
+ Offset
+ Mengimbangi
+
+
+
+ Spiral
+ Spiral
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ None
+ Tidak ada
+
+
+
+ Only
+ Only
+
+
+
+ First
+ First
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Planar
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -4014,6 +4509,183 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create a Waterline Operation from a model
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ This operation requires OpenCamLib to be installed.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Adat
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Garis
+
+
+
+ Offset
+ Mengimbangi
+
+
+
+ Spiral
+ Spiral
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ None
+ Tidak ada
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Edit HoldingTags Dress-up
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ When enabled connected extension edges are combined to wires.
+
+
+
+ Uses the outline of the base geometry.
+ Uses the outline of the base geometry.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Edit PropertyBag
+
+
+
+ Create PropertyBag
+ Create PropertyBag
+
+
+
+ PropertyBag
+ PropertyBag
+
+
+
+ Creates an object which can be used to store reference properties.
+ Creates an object which can be used to store reference properties.
+
+
+
+ List of custom property groups
+ List of custom property groups
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_it.qm b/src/Mod/Path/Gui/Resources/translations/Path_it.qm
index 51152823fa..74e7a846a4 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_it.qm and b/src/Mod/Path/Gui/Resources/translations/Path_it.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_it.ts b/src/Mod/Path/Gui/Resources/translations/Path_it.ts
index 170671849e..59df9adc21 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_it.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_it.ts
@@ -213,10 +213,20 @@
The Z height of the hop
L'altezza Z del salto
+
+
+ Default length of extensions.
+ Lunghezza predefinita delle estensioni.
+
+
+
+ List of features to extend.
+ Elenco delle funzioni da estendere.
+
Stop processing
- Stop processing
+ Interrompi elaborazione
@@ -243,6 +253,111 @@
The output location for the probe data to be written
La posizione di output per scrivere i dati della sonda
+
+
+ The base geometry for this operation
+ La geometria di base per questa operazione
+
+
+
+ Holds the calculated value for the StartDepth
+ Contiene il valore calcolato per StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Contiene il valore calcolato per FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Detiene il diametro dell'utensile
+
+
+
+ Holds the max Z value of Stock
+ Contiene il valore Z max del pezzo grezzo
+
+
+
+ Holds the min Z value of Stock
+ Contiene il valore Z minimo del pezzo grezzo
+
+
+
+ Make False, to prevent operation from generating code
+ Rendere False, per escludere l'operazione dalla generazione del codice
+
+
+
+ An optional comment for this Operation
+ Un commento opzionale per questa operazione
+
+
+
+ User Assigned Label
+ Etichetta utente assegnata
+
+
+
+ Operations Cycle Time Estimation
+ Stima del tempo di lavorazione
+
+
+
+ Base locations for this operation
+ La posizione di base per questa operazione
+
+
+
+ Coolant mode for this operation
+ Modalità di refrigerazione per questa operazione
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Posizione in altezza dell'utensile in Z prima dell'esecuzione del taglio in profondità
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Profondità finale dell'utensile - il valore inferiore in Z
+
+
+
+ Incremental Step Down of Tool
+ Passo decrementale dello strumento
+
+
+
+ Maximum material removed on final pass.
+ Massimo materiale rimosso nella passata finale.
+
+
+
+ Rapid Safety Height between locations.
+ Altezza di sicurezza in avanzamento rapido tra le posizioni.
+
+
+
+ The start point of this path
+ Il punto iniziale di questo percorso
+
+
+
+ Lower limit of the turning diameter
+ Limite inferiore del diametro della tornitura
+
+
+
+ Upper limit of the turning diameter.
+ Limite superiore del diametro della tornitura.
+
+
+
+ Coolant option for this operation
+ Opzione di refrigerazione per questa operazione
+
Additional base objects to be engraved
@@ -256,7 +371,7 @@
Vcarve Tolerance
- Vcarve Tolerance
+ Tolleranza Vcarve
@@ -296,12 +411,12 @@
The Style of motion into the Path
- The Style of motion into the Path
+ Lo stile di movimento nel percorso
The Style of motion out of the Path
- The Style of motion out of the Path
+ Lo stile di movimento esterno al percorso
@@ -333,11 +448,6 @@
Fixture Offset Number
Scostamento del punto di fissaggio
-
-
- Make False, to prevent operation from generating code
- Rendere False, per escludere l'operazione dalla generazione del codice
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
Il gcode da inserire
+
+
+ Angle of ramp.
+ Angolo di rampa.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Velocità di avanzamento personalizzata
+
+
+ Width of tags.
+ Larghezza dei lembi.
+
+
+
+ Height of tags.
+ Altezza dei lembi.
+
+
+
+ Angle of tag plunge and ascent.
+ Angolo dei lembi in entrata e uscita.
+
+
+
+ Radius of the fillet for the tag.
+ Raggio del raccordo per il lembi.
+
+
+
+ Locations of inserted holding tags
+ Posizione dei fermi inseriti
+
+
+
+ IDs of disabled holding tags
+ ID dei fermi disabilitati
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Espressione utilizzata per StepDown nelle nuove operazioni.
-
-
- Start pocketing at center or boundary
- Inizia la lavorazione della cava dal centro oppure dal bordo
-
-
-
- Percent of cutter diameter to step over on each pass
- Percentuale del diametro dell'utensile da sovrapporre alla passata precedente
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Scostamento extra da applicare all'operazione. La direzione è dipendente dall'operazione.
+
+
+ Start pocketing at center or boundary
+ Inizia la lavorazione della cava dal centro oppure dal bordo
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Percentuale del diametro dell'utensile da sovrapporre alla passata precedente
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Tenta di evitare retrazioni inutili.
+
+
+ The side of path to insert bones
+ Il lato del percorso in cui inserire i tagli
+
+
+
+ The style of bones
+ Tipo di taglio
+
+
+
+ Bones that aren't dressed up
+ I tagli che non sono integrati nella traiettoria aggiuntiva
+
+
+
+ The algorithm to determine the bone length
+ L'algoritmo per determinare la lunghezza del taglio
+
+
+
+ Dressup length if Incision == custom
+ Lunghezza della traiettoria aggiuntiva se Incisione == personalizzato
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ Elenco dei gruppi di proprietà personalizzati
+
The point file from the surface probing.
@@ -806,7 +981,7 @@
Split Arcs into discrete segments
- Split Arcs into discrete segments
+ Dividere gli archi in segmenti discreti
@@ -848,6 +1023,76 @@
The tool used by this controller
Lo strumento usato da questo controllore
+
+
+ List of disabled features
+ Elenco dei tratti disabilitati
+
+
+
+ The NC output file for this project
+ Il file di output NC per questo progetto
+
+
+
+ Select the Post Processor
+ Seleziona il Post processore
+
+
+
+ Last Time the Job was post-processed
+ L'ultima volta che il lavoro è stato post-elaborato
+
+
+
+ An optional description for this job
+ Una descrizione facoltativa per questa lavorazione
+
+
+
+ Job Cycle Time Estimation
+ Stima del tempo di lavorazione
+
+
+
+ Solid object to be used as stock.
+ Oggetto solido da utilizzare come pezzo grezzo.
+
+
+
+ Select the Type of Job
+ Seleziona il tipo di lavorazione
+
+
+
+ Split output into multiple gcode files
+ Dividi l'output in più file gcode
+
+
+
+ If multiple WCS, order the output this way
+ In caso di WCS multiplo, ordinare l'output in questo modo
+
+
+
+ The Work Coordinate Systems for the Job
+ I sistemi di coordinate di lavoro per la lavorazione
+
+
+
+ SetupSheet holding the settings for this job
+ Tabella delle impostazioni con le configurazioni di questa lavorazione
+
+
+
+ The base objects for all operations
+ Gli oggetti di base per tutte le operazioni
+
+
+
+ Collection of all tool controllers for the job
+ Raccolta di tutti i controller di utensili per il lavoro
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
Non riesco a trovare la lavorazione %s
+
+
+ Illegal arc: Start and end radii not equal
+ Arco illegale: raggi di inizio e fine non uguali
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
L'utensile selezionato non è una punta di foratura
-
-
- Illegal arc: Start and end radii not equal
- Arco illegale: raggi di inizio e fine non uguali
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
CCW
-
-
- List of disabled features
- Elenco dei tratti disabilitati
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utilità
+
+
+ List of disabled features
+ Elenco dei tratti disabilitati
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Crea un percorso di sbavatura lungo i bordi o attorno alle facce
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Modifica Dress-up dei fermi
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Tipo di oggetto pezzo grezzo non supportato %s
-
-
-
- Unsupported stock type %s (%d)
- Tipo di oggetto pezzo grezzo non supportato %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
L'oggetto grezzo non è un cilindro!
+
+
+ Unsupported stock object %s
+ Tipo di oggetto pezzo grezzo non supportato %s
+
+
+
+ Unsupported stock type %s (%d)
+ Tipo di oggetto pezzo grezzo non supportato %s (%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Oggetto solido da utilizzare come pezzo grezzo.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Dividi l'output in più file gcode
-
-
-
- If multiple WCS, order the output this way
- In caso di WCS multiplo, ordinare l'output in questo modo
-
-
-
- The Work Coordinate Systems for the Job
- I sistemi di coordinate di lavoro per la lavorazione
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Raccolta di tutti i controller di utensili per il lavoro
+
+
+ The Work Coordinate Systems for the Job
+ I sistemi di coordinate di lavoro per la lavorazione
+
+
+
+ If multiple WCS, order the output this way
+ In caso di WCS multiplo, ordinare l'output in questo modo
+
+
+
+ Split output into multiple gcode files
+ Dividi l'output in più file gcode
+
+
+
+ Select the Type of Job
+ Seleziona il tipo di lavorazione
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- La geometria di base per questa operazione
-
-
-
- Holds the calculated value for the StartDepth
- Contiene il valore calcolato per StartDepth
-
-
-
- Holds the calculated value for the FinalDepth
- Contiene il valore calcolato per FinalDepth
-
-
-
- Holds the diameter of the tool
- Detiene il diametro dell'utensile
-
-
-
- Holds the max Z value of Stock
- Contiene il valore Z max del pezzo grezzo
-
-
-
- Holds the min Z value of Stock
- Contiene il valore Z minimo del pezzo grezzo
-
-
-
- Make False, to prevent operation from generating code
- Rendere False, per escludere l'operazione dalla generazione del codice
-
-
-
- An optional comment for this Operation
- Un commento opzionale per questa operazione
-
-
-
- User Assigned Label
- Etichetta utente assegnata
-
-
-
- Operations Cycle Time Estimation
- Stima del tempo di lavorazione
-
-
-
- Base locations for this operation
- La posizione di base per questa operazione
-
-
-
- Coolant mode for this operation
- Modalità di refrigerazione per questa operazione
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Posizione in altezza dell'utensile in Z prima dell'esecuzione del taglio in profondità
-
-
-
- Final Depth of Tool- lowest value in Z
- Profondità finale dell'utensile - il valore inferiore in Z
-
-
-
- Starting Depth internal use only for derived values
- Profondità iniziale di uso interno solo per valori derivati
-
-
-
- Incremental Step Down of Tool
- Passo decrementale dello strumento
-
-
-
- Maximum material removed on final pass.
- Massimo materiale rimosso nella passata finale.
-
-
-
- The height needed to clear clamps and obstructions
- L'altezza necessaria per evitare collisioni con ostacoli e ostruzioni
-
-
-
- Rapid Safety Height between locations.
- Altezza di sicurezza in avanzamento rapido tra le posizioni.
-
-
-
- The start point of this path
- Il punto iniziale di questo percorso
-
-
-
- Make True, if specifying a Start Point
- Rendere True, se specifica un punto iniziale
-
-
-
- Lower limit of the turning diameter
- Limite inferiore del diametro della tornitura
-
-
-
- Upper limit of the turning diameter.
- Limite superiore del diametro della tornitura.
-
-
-
- Coolant option for this operation
- Opzione di refrigerazione per questa operazione
-
Edit
@@ -1667,11 +1784,131 @@ If it is necessary to set the FinalDepth manually please select a different oper
Pick Start Point
Scegli il punto iniziale
+
+
+ Make False, to prevent operation from generating code
+ Rendere False, per escludere l'operazione dalla generazione del codice
+
+
+
+ The base geometry for this operation
+ La geometria di base per questa operazione
+
+
+
+ Holds the calculated value for the StartDepth
+ Contiene il valore calcolato per StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Contiene il valore calcolato per FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Detiene il diametro dell'utensile
+
+
+
+ Holds the max Z value of Stock
+ Contiene il valore Z max del pezzo grezzo
+
+
+
+ Holds the min Z value of Stock
+ Contiene il valore Z minimo del pezzo grezzo
+
+
+
+ An optional comment for this Operation
+ Un commento opzionale per questa operazione
+
+
+
+ User Assigned Label
+ Etichetta utente assegnata
+
+
+
+ Base locations for this operation
+ La posizione di base per questa operazione
+
+
+
+ Coolant mode for this operation
+ Modalità di refrigerazione per questa operazione
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Posizione in altezza dell'utensile in Z prima dell'esecuzione del taglio in profondità
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Profondità finale dell'utensile - il valore inferiore in Z
+
+
+
+ Starting Depth internal use only for derived values
+ Profondità iniziale di uso interno solo per valori derivati
+
+
+
+ Incremental Step Down of Tool
+ Passo decrementale dello strumento
+
+
+
+ Maximum material removed on final pass.
+ Massimo materiale rimosso nella passata finale.
+
+
+
+ The height needed to clear clamps and obstructions
+ L'altezza necessaria per evitare collisioni con ostacoli e ostruzioni
+
+
+
+ Rapid Safety Height between locations.
+ Altezza di sicurezza in avanzamento rapido tra le posizioni.
+
+
+
+ The start point of this path
+ Il punto iniziale di questo percorso
+
+
+
+ Make True, if specifying a Start Point
+ Rendere True, se specifica un punto iniziale
+
+
+
+ Lower limit of the turning diameter
+ Limite inferiore del diametro della tornitura
+
+
+
+ Upper limit of the turning diameter.
+ Limite superiore del diametro della tornitura.
+
+
+
+ Coolant option for this operation
+ Opzione di refrigerazione per questa operazione
+
Job Cycle Time Estimation
Stima del tempo di lavorazione
+
+
+ Operations Cycle Time Estimation
+ Stima del tempo di lavorazione
+
PathPlane
@@ -1734,29 +1971,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Profondità finale impostata sotto ZMin delle facce selezionate.
-
- PathPocketShape
-
-
- Default length of extensions.
- Lunghezza predefinita delle estensioni.
-
-
-
- List of features to extend.
- Elenco delle funzioni da estendere.
-
-
-
- When enabled connected extension edges are combined to wires.
- Quando abilitato, i bordi di estensione connessi sono combinati con i wire.
-
-
-
- Uses the outline of the base geometry.
- Usa il contorno della geometria di base.
-
-
PathProfile
@@ -1830,34 +2044,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Per i bordi aperti, controllare la profondità finale per questa operazione.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Modifica contenitore delle proprietà
-
-
-
- Create PropertyBag
- Crea contenitore delle proprietà
-
-
-
- PropertyBag
- PropertyBag
-
-
-
- Creates an object which can be used to store reference properties.
- Crea un oggetto che può essere usato per memorizzare le proprietà di riferimento.
-
-
-
- List of custom property groups
- Elenco dei gruppi di proprietà personalizzati
-
-
PathSlot
@@ -2497,7 +2683,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Profiling
- Profiling
+ Profilazione
@@ -2791,7 +2977,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Length/Radius positive not Null
- Length/Radius positive not Null
+ Lunghezza/Raggio positivo non nullo
@@ -2884,59 +3070,69 @@ If it is necessary to set the FinalDepth manually please select a different oper
Angle of ramp.
Angolo di rampa.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Elica
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Personalizza
+
RampEntry Dress-up
Rampa d'ingresso
+
+
+ Please select one path object
+ Si prega di selezionare un oggetto Percorso
+
+
+
+ The selected object is not a path
+ L'oggetto selezionato non è un percorso
+
+
+
+ Please select a Profile object
+ Si prega di selezionare un oggetto Profilo
+
Path_DressupTag
-
-
- The base path to modify
- Il percorso di base da modificare
-
-
-
- Width of tags.
- Larghezza dei lembi.
-
-
-
- Height of tags.
- Altezza dei lembi.
-
-
-
- Angle of tag plunge and ascent.
- Angolo dei lembi in entrata e uscita.
-
-
-
- Radius of the fillet for the tag.
- Raggio del raccordo per il lembi.
-
-
-
- Locations of inserted holding tags
- Posizione dei fermi inseriti
-
-
-
- IDs of disabled holding tags
- ID dei fermi disabilitati
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Fattore determinante il numero di segmenti usati per approssimare le linguette arrotondate.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Impossibile inserire i lembi di fermo per questo percorso - selezionare un percorso Profilo
-
The selected object is not a path
@@ -2982,6 +3178,46 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Tag Dress-up
Crea lembi di fermo
+
+
+ The base path to modify
+ Il percorso di base da modificare
+
+
+
+ Width of tags.
+ Larghezza dei lembi.
+
+
+
+ Height of tags.
+ Altezza dei lembi.
+
+
+
+ Angle of tag plunge and ascent.
+ Angolo dei lembi in entrata e uscita.
+
+
+
+ Radius of the fillet for the tag.
+ Raggio del raccordo per il lembi.
+
+
+
+ Locations of inserted holding tags
+ Posizione dei fermi inseriti
+
+
+
+ IDs of disabled holding tags
+ ID dei fermi disabilitati
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Fattore determinante il numero di segmenti usati per approssimare le linguette arrotondate.
+
No Base object found.
@@ -3002,6 +3238,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Base Path is empty.
Il Percorso di base è vuoto.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Impossibile inserire i lembi di fermo per questo percorso - selezionare un percorso Profilo
+
Path_DressupZCorrect
@@ -3041,12 +3282,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
G99
- G99
+ G99
G98
- G98
+ G98
@@ -3095,6 +3336,19 @@ If it is necessary to set the FinalDepth manually please select a different oper
Operazioni di incisione
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Esporta come modello
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Esporta il percorso della lavorazione come modello per essere usato in altri lavori
+
+
Path_Helix
@@ -3191,6 +3445,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
Exports Path Job as a template to be used for other jobs
Esporta il percorso della lavorazione come modello per essere usato in altri lavori
+
+
+ Edit
+ Modifica
+
+
+
+ Stock not a cylinder!
+ L'oggetto grezzo non è un cilindro!
+
Edit Job
@@ -3211,6 +3475,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
All Files (*.*)
Tutti i File (*.*)
+
+
+ Unsupported stock object %s
+ Tipo di oggetto pezzo grezzo non supportato %s
+
+
+
+ Unsupported stock type %s (%d)
+ Tipo di oggetto pezzo grezzo non supportato %s (%d)
+
Model Selection
@@ -3221,6 +3495,71 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Job
Crea una lavorazione
+
+
+ Fixture
+ Fissaggio
+
+
+
+ Tool
+ Utensile
+
+
+
+ Operation
+ Operazione
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Solidi
+
+
+
+ Jobs
+ Lavorazione
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Box: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Cilindro: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Tipo di oggetto non supportato come pezzo grezzo
+
Path_MillFace
@@ -3243,6 +3582,24 @@ If it is necessary to set the FinalDepth manually please select a different oper
Attiva o disattiva lo stato attivo dell'operazione
+
+ Path_Operation
+
+
+ None
+ Nessuno
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3452,6 +3809,14 @@ If it is necessary to set the FinalDepth manually please select a different oper
Profila l'intero modello, le facce selezionate o i bordi selezionati
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
@@ -3762,6 +4127,136 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Personalizza
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ Circular
+ Cerchio
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Linea
+
+
+
+ Offset
+ Offset
+
+
+
+ Spiral
+ Spirale
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ None
+ Nessuno
+
+
+
+ Only
+ Only
+
+
+
+ First
+ Primo
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Planare
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -3788,22 +4283,22 @@ If it is necessary to set the FinalDepth manually please select a different oper
Metric Internal
- Metric Internal
+ Interno Metrico
Imperial Internal
- Imperial Internal
+ Interno Imperiale
LeftHand
- LeftHand
+ Mano sinistra
RightHand
- RightHand
+ Mano destra
@@ -4014,6 +4509,183 @@ If it is necessary to set the FinalDepth manually please select a different oper
Crea un'operazione Waterline da un modello
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ Questa operazione richiede l'installazione di OpenCamLib.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Personalizza
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Cerchio
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Linea
+
+
+
+ Offset
+ Offset
+
+
+
+ Spiral
+ Spirale
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ None
+ Nessuno
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Modifica Dress-up dei fermi
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Lunghezza predefinita delle estensioni.
+
+
+
+ List of features to extend.
+ Elenco delle funzioni da estendere.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ Quando abilitato, i bordi di estensione connessi sono combinati con i wire.
+
+
+
+ Uses the outline of the base geometry.
+ Usa il contorno della geometria di base.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Modifica contenitore delle proprietà
+
+
+
+ Create PropertyBag
+ Crea contenitore delle proprietà
+
+
+
+ PropertyBag
+ PropertyBag
+
+
+
+ Creates an object which can be used to store reference properties.
+ Crea un oggetto che può essere usato per memorizzare le proprietà di riferimento.
+
+
+
+ List of custom property groups
+ Elenco dei gruppi di proprietà personalizzati
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ja.qm b/src/Mod/Path/Gui/Resources/translations/Path_ja.qm
index d5183ad7b3..e57553c8b4 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ja.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ja.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ja.ts b/src/Mod/Path/Gui/Resources/translations/Path_ja.ts
index 0111136b5d..90daa9b5d7 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_ja.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_ja.ts
@@ -213,6 +213,16 @@
The Z height of the hop
ホップのZ高さ
+
+
+ Default length of extensions.
+ 延長のデフォルト長さ
+
+
+
+ List of features to extend.
+ 延長するフィーチャーのリスト。
+
Stop processing
@@ -243,6 +253,111 @@
The output location for the probe data to be written
The output location for the probe data to be written
+
+
+ The base geometry for this operation
+ この工程のベースジオメトリー
+
+
+
+ Holds the calculated value for the StartDepth
+ StartDepthの計算値を保持
+
+
+
+ Holds the calculated value for the FinalDepth
+ FinalDepthの計算値を保持
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ ストックの最大Z値を保持
+
+
+
+ Holds the min Z value of Stock
+ ストックの最小Z値を保持
+
+
+
+ Make False, to prevent operation from generating code
+ 生成されたコードの工程を止めるにはFalseにします
+
+
+
+ An optional comment for this Operation
+ この工程のオプションコメント
+
+
+
+ User Assigned Label
+ ユーザー割り当てラベル
+
+
+
+ Operations Cycle Time Estimation
+ オペレーションのサイクルタイム推定値
+
+
+
+ Base locations for this operation
+ この工程のベース位置
+
+
+
+ Coolant mode for this operation
+ この工程の冷却モード
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ ツールの開始深さ - Z方向の初回の切り込み量
+
+
+
+ Final Depth of Tool- lowest value in Z
+ ツールの最終深さ - Z方向の最小値
+
+
+
+ Incremental Step Down of Tool
+ ツールの増分ステップダウン
+
+
+
+ Maximum material removed on final pass.
+ 最終パスで取り除かれる最大マテリアル
+
+
+
+ Rapid Safety Height between locations.
+ 位置間の高速安全高さ
+
+
+
+ The start point of this path
+ このパスの開始点
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ この工程の冷却オプション
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
フィクスチャーオフセット番号
-
-
- Make False, to prevent operation from generating code
- 生成されたコードの工程を止めるにはFalseにします
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
挿入するGコード
+
+
+ Angle of ramp.
+ 斜面の角度
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
カスタム送り速度
+
+
+ Width of tags.
+ タグの幅。
+
+
+
+ Height of tags.
+ タグの高さ。
+
+
+
+ Angle of tag plunge and ascent.
+ タグの下降と上昇の角度
+
+
+
+ Radius of the fillet for the tag.
+ タグのフィレットの半径
+
+
+
+ Locations of inserted holding tags
+ 挿入された保持タグの位置
+
+
+
+ IDs of disabled holding tags
+ 無効化された保持タグのID
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expression used for StepDown of new operations.
-
-
- Start pocketing at center or boundary
- 中心または境界へのポケット作成を開始
-
-
-
- Percent of cutter diameter to step over on each pass
- 工具直径に対する経路同士の重なり率（％）
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
工程に適用する追加オフセット。方向は工程に依存して変わります。
+
+
+ Start pocketing at center or boundary
+ 中心または境界へのポケット作成を開始
+
+
+
+ Percent of cutter diameter to step over on each pass
+ 工具直径に対する経路同士の重なり率（％）
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
不要な後退をできるだけ回避
+
+
+ The side of path to insert bones
+ ボーン挿入のためのパスの側面
+
+
+
+ The style of bones
+ ボーンのスタイル
+
+
+
+ Bones that aren't dressed up
+ ドレスアップされていないボーン
+
+
+
+ The algorithm to determine the bone length
+ ボーンの長さを決定するためのアルゴリズム
+
+
+
+ Dressup length if Incision == custom
+ Incision == custom の場合のドレスアップ寸法
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ List of custom property groups
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
このコント ローラーが使用するツール
+
+
+ List of disabled features
+ 無効なフィーチャーのリスト
+
+
+
+ The NC output file for this project
+ このプロジェクトの NC 出力ファイル
+
+
+
+ Select the Post Processor
+ ポストプロセッサを選択
+
+
+
+ Last Time the Job was post-processed
+ Last Time the Job was post-processed
+
+
+
+ An optional description for this job
+ An optional description for this job
+
+
+
+ Job Cycle Time Estimation
+ ジョブのサイクルタイム推定値
+
+
+
+ Solid object to be used as stock.
+ ストックとして使用されるソリッドオブジェクト
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ SetupSheet holding the settings for this job
+ このジョブの設定を保持しているセットアップシート
+
+
+
+ The base objects for all operations
+ すべての工程のベースオブジェクト
+
+
+
+ Collection of all tool controllers for the job
+ Collection of all tool controllers for the job
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
ジョブ %s が見つかりませんでした。
+
+
+ Illegal arc: Start and end radii not equal
+ 不正な円弧: 開始と終了の半径が等しくありません
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
Selected tool is not a drill
-
-
- Illegal arc: Start and end radii not equal
- 不正な円弧: 開始と終了の半径が等しくありません
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
CCW
-
-
- List of disabled features
- 無効なフィーチャーのリスト
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
ユーティリティ
+
+
+ List of disabled features
+ 無効なフィーチャーのリスト
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Creates a Deburr Path along Edges or around Faces
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- 保持タグ・ドレス アップを編集
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- サポートされていないストックオブジェクト %s
-
-
-
- Unsupported stock type %s (%d)
- サポートされていないストックタイプ %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
ストックが円筒ではありません!
+
+
+ Unsupported stock object %s
+ サポートされていないストックオブジェクト %s
+
+
+
+ Unsupported stock type %s (%d)
+ サポートされていないストックタイプ %s (%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
ストックとして使用されるソリッドオブジェクト
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Split output into multiple gcode files
-
-
-
- If multiple WCS, order the output this way
- If multiple WCS, order the output this way
-
-
-
- The Work Coordinate Systems for the Job
- The Work Coordinate Systems for the Job
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Collection of all tool controllers for the job
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- この工程のベースジオメトリー
-
-
-
- Holds the calculated value for the StartDepth
- StartDepthの計算値を保持
-
-
-
- Holds the calculated value for the FinalDepth
- FinalDepthの計算値を保持
-
-
-
- Holds the diameter of the tool
- Holds the diameter of the tool
-
-
-
- Holds the max Z value of Stock
- ストックの最大Z値を保持
-
-
-
- Holds the min Z value of Stock
- ストックの最小Z値を保持
-
-
-
- Make False, to prevent operation from generating code
- 生成されたコードの工程を止めるにはFalseにします
-
-
-
- An optional comment for this Operation
- この工程のオプションコメント
-
-
-
- User Assigned Label
- ユーザー割り当てラベル
-
-
-
- Operations Cycle Time Estimation
- オペレーションのサイクルタイム推定値
-
-
-
- Base locations for this operation
- この工程のベース位置
-
-
-
- Coolant mode for this operation
- この工程の冷却モード
-
-
-
- Starting Depth of Tool- first cut depth in Z
- ツールの開始深さ - Z方向の初回の切り込み量
-
-
-
- Final Depth of Tool- lowest value in Z
- ツールの最終深さ - Z方向の最小値
-
-
-
- Starting Depth internal use only for derived values
- 派生値にのみ使用される内部的な開始深さ
-
-
-
- Incremental Step Down of Tool
- ツールの増分ステップダウン
-
-
-
- Maximum material removed on final pass.
- 最終パスで取り除かれる最大マテリアル
-
-
-
- The height needed to clear clamps and obstructions
- クランプ治具や障害物をかわすために必要な高さ
-
-
-
- Rapid Safety Height between locations.
- 位置間の高速安全高さ
-
-
-
- The start point of this path
- このパスの開始点
-
-
-
- Make True, if specifying a Start Point
- 開始点を指定する場合は True
-
-
-
- Lower limit of the turning diameter
- Lower limit of the turning diameter
-
-
-
- Upper limit of the turning diameter.
- Upper limit of the turning diameter.
-
-
-
- Coolant option for this operation
- この工程の冷却オプション
-
Edit
@@ -1668,11 +1785,131 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択
Pick Start Point
開始点を選択
+
+
+ Make False, to prevent operation from generating code
+ 生成されたコードの工程を止めるにはFalseにします
+
+
+
+ The base geometry for this operation
+ この工程のベースジオメトリー
+
+
+
+ Holds the calculated value for the StartDepth
+ StartDepthの計算値を保持
+
+
+
+ Holds the calculated value for the FinalDepth
+ FinalDepthの計算値を保持
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ ストックの最大Z値を保持
+
+
+
+ Holds the min Z value of Stock
+ ストックの最小Z値を保持
+
+
+
+ An optional comment for this Operation
+ この工程のオプションコメント
+
+
+
+ User Assigned Label
+ ユーザー割り当てラベル
+
+
+
+ Base locations for this operation
+ この工程のベース位置
+
+
+
+ Coolant mode for this operation
+ この工程の冷却モード
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ ツールの開始深さ - Z方向の初回の切り込み量
+
+
+
+ Final Depth of Tool- lowest value in Z
+ ツールの最終深さ - Z方向の最小値
+
+
+
+ Starting Depth internal use only for derived values
+ 派生値にのみ使用される内部的な開始深さ
+
+
+
+ Incremental Step Down of Tool
+ ツールの増分ステップダウン
+
+
+
+ Maximum material removed on final pass.
+ 最終パスで取り除かれる最大マテリアル
+
+
+
+ The height needed to clear clamps and obstructions
+ クランプ治具や障害物をかわすために必要な高さ
+
+
+
+ Rapid Safety Height between locations.
+ 位置間の高速安全高さ
+
+
+
+ The start point of this path
+ このパスの開始点
+
+
+
+ Make True, if specifying a Start Point
+ 開始点を指定する場合は True
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ この工程の冷却オプション
+
Job Cycle Time Estimation
ジョブのサイクルタイム推定値
+
+
+ Operations Cycle Time Estimation
+ オペレーションのサイクルタイム推定値
+
PathPlane
@@ -1735,29 +1972,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択
Final depth set below ZMin of face(s) selected.
-
- PathPocketShape
-
-
- Default length of extensions.
- 延長のデフォルト長さ
-
-
-
- List of features to extend.
- 延長するフィーチャーのリスト。
-
-
-
- When enabled connected extension edges are combined to wires.
- 有効な場合、つながった延長エッジがワイヤーと組み合わされます。
-
-
-
- Uses the outline of the base geometry.
- ベースジオメトリーの輪郭を使用
-
-
PathProfile
@@ -1831,34 +2045,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択
For open edges, verify Final Depth for this operation.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Edit PropertyBag
-
-
-
- Create PropertyBag
- Create PropertyBag
-
-
-
- PropertyBag
- PropertyBag
-
-
-
- Creates an object which can be used to store reference properties.
- Creates an object which can be used to store reference properties.
-
-
-
- List of custom property groups
- List of custom property groups
-
-
PathSlot
@@ -2885,59 +3071,69 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択
Angle of ramp.
斜面の角度
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ 螺旋
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ カスタム設定
+
RampEntry Dress-up
RampEntry ドレスアップ
+
+
+ Please select one path object
+ パスオブジェクトをひとつ選択してください
+
+
+
+ The selected object is not a path
+ 選択されたオブジェクトはパスではありません
+
+
+
+ Please select a Profile object
+ プロファイルオブジェクトを選択してください。
+
Path_DressupTag
-
-
- The base path to modify
- 変更するベースパス
-
-
-
- Width of tags.
- タグの幅。
-
-
-
- Height of tags.
- タグの高さ。
-
-
-
- Angle of tag plunge and ascent.
- タグの下降と上昇の角度
-
-
-
- Radius of the fillet for the tag.
- タグのフィレットの半径
-
-
-
- Locations of inserted holding tags
- 挿入された保持タグの位置
-
-
-
- IDs of disabled holding tags
- 無効化された保持タグのID
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- 曲線タグの近似で使用される線分数を決定する係数
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- このパスに対して保持タグを挿入することができません - プロファイルパスを選択してください。
-
The selected object is not a path
@@ -2983,6 +3179,46 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択
Create Tag Dress-up
タグ・ドレスアップを作成
+
+
+ The base path to modify
+ 変更するベースパス
+
+
+
+ Width of tags.
+ タグの幅。
+
+
+
+ Height of tags.
+ タグの高さ。
+
+
+
+ Angle of tag plunge and ascent.
+ タグの下降と上昇の角度
+
+
+
+ Radius of the fillet for the tag.
+ タグのフィレットの半径
+
+
+
+ Locations of inserted holding tags
+ 挿入された保持タグの位置
+
+
+
+ IDs of disabled holding tags
+ 無効化された保持タグのID
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ 曲線タグの近似で使用される線分数を決定する係数
+
No Base object found.
@@ -3003,6 +3239,11 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択
Base Path is empty.
ベースパスが空です。
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ このパスに対して保持タグを挿入することができません - プロファイルパスを選択してください。
+
Path_DressupZCorrect
@@ -3096,6 +3337,19 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択
彫刻操作
+
+ Path_ExportTemplate
+
+
+ Export Template
+ テンプレートをエクスポート
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ パスジョブを他のジョブで使用するテンプレートとしてエクスポート
+
+
Path_Helix
@@ -3192,6 +3446,16 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択
Exports Path Job as a template to be used for other jobs
パスジョブを他のジョブで使用するテンプレートとしてエクスポート
+
+
+ Edit
+ 編集
+
+
+
+ Stock not a cylinder!
+ ストックが円筒ではありません!
+
Edit Job
@@ -3212,6 +3476,16 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択
All Files (*.*)
すべてのファイル (*.*)
+
+
+ Unsupported stock object %s
+ サポートされていないストックオブジェクト %s
+
+
+
+ Unsupported stock type %s (%d)
+ サポートされていないストックタイプ %s (%d)
+
Model Selection
@@ -3222,6 +3496,71 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択
Create Job
ジョブを作成
+
+
+ Fixture
+ 取り付け具
+
+
+
+ Tool
+ ツール
+
+
+
+ Operation
+ オペレーション
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ ソリッド
+
+
+
+ Jobs
+ ジョブ
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ ベース -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ ボックス: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ 円柱: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ サポートされていないストックタイプ
+
Path_MillFace
@@ -3244,6 +3583,24 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択
Toggle the Active State of the Operation
+
+ Path_Operation
+
+
+ None
+ なし
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3453,6 +3810,14 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択
Profile entire model, selected face(s) or selected edge(s)
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
@@ -3763,6 +4128,136 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ カスタム設定
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ Circular
+ 円形
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ 直線
+
+
+
+ Offset
+ オフセット
+
+
+
+ Spiral
+ 渦巻
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ マルチパス
+
+
+
+ None
+ なし
+
+
+
+ Only
+ Only
+
+
+
+ First
+ 第1
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ 平面
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -4015,6 +4510,183 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択
モデルからウォーターライン工程を作成
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ この工程ではOpenCamLibをインストールする必要があります。
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ カスタム設定
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ 円形
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ 直線
+
+
+
+ Offset
+ オフセット
+
+
+
+ Spiral
+ 渦巻
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ None
+ なし
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ マルチパス
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ 保持タグ・ドレス アップを編集
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ 延長のデフォルト長さ
+
+
+
+ List of features to extend.
+ 延長するフィーチャーのリスト。
+
+
+
+ When enabled connected extension edges are combined to wires.
+ 有効な場合、つながった延長エッジがワイヤーと組み合わされます。
+
+
+
+ Uses the outline of the base geometry.
+ ベースジオメトリーの輪郭を使用
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Edit PropertyBag
+
+
+
+ Create PropertyBag
+ Create PropertyBag
+
+
+
+ PropertyBag
+ PropertyBag
+
+
+
+ Creates an object which can be used to store reference properties.
+ Creates an object which can be used to store reference properties.
+
+
+
+ List of custom property groups
+ List of custom property groups
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ka.qm b/src/Mod/Path/Gui/Resources/translations/Path_ka.qm
index e7ae7f887f..e9c13baef3 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ka.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ka.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ka.ts b/src/Mod/Path/Gui/Resources/translations/Path_ka.ts
index e0b61ea49d..33f6173b19 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_ka.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_ka.ts
@@ -31,7 +31,7 @@
The model will be rotated around this axis.
- The model will be rotated around this axis.
+ მოდელი შემოტრიალდება ღერძის გარშემო.
@@ -171,22 +171,22 @@
Profile the edges of the selection.
- Profile the edges of the selection.
+ მონიშნულის წიბოების პროფილირება.
Make True, if specifying a Start Point
- Make True, if specifying a Start Point
+ ჩართვა, თუ საწყისი წერტილი მიეთითება
The path to be copied
- The path to be copied
+ დასაკოპირებელი ტრაექტორია
The base path to modify
- The base path to modify
+ ჩასასწორებელი საბაზისო ტრაექტორია
@@ -206,43 +206,158 @@
The object to be reached by this hop
- The object to be reached by this hop
+ ამ ბილით ობიექტამდე ვერ მიაღწევთ
The Z height of the hop
- The Z height of the hop
+ ბიჯის Z სიმაღლე
+
+
+
+ Default length of extensions.
+ გაფართოებებიის ნაგულისხმევი სიგრძე.
+
+
+
+ List of features to extend.
+ გასაფართოებელი თვისებების სია.
Stop processing
- Stop processing
+ დამუშავების შეწყვეტა
X offset between tool and probe
- X offset between tool and probe
+ ზონდსა და ხელსაწყოს შორის წანაცვლების X
Y offset between tool and probe
- Y offset between tool and probe
+ ზონდსა და ხელსაწყოს შორის წანაცვლების Y
Number of points to probe in X direction
- Number of points to probe in X direction
+ X მიმართულებით ზონდირებადი წერტილების რაოდენობა
Number of points to probe in Y direction
- Number of points to probe in Y direction
+ Y მიმართულებით ზონდირებადი წერტილების რაოდენობა
The output location for the probe data to be written
The output location for the probe data to be written
+
+
+ The base geometry for this operation
+ ამ ოპერაციის საბაზისო გეომეტრია
+
+
+
+ Holds the calculated value for the StartDepth
+ Holds the calculated value for the StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ შეიცავს საბოლოო სიღრმის გამოთვლილ მნიშვნელობას
+
+
+
+ Holds the diameter of the tool
+ ამ ხელსაწყოს დიამეტრის შეზღუდვა
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ Make False, to prevent operation from generating code
+ გამორთეთ ოპერაციისთვის კოდის გენერაციის ხელის შესაშლელად
+
+
+
+ An optional comment for this Operation
+ An optional comment for this Operation
+
+
+
+ User Assigned Label
+ მომხმარებლის მიერ მინიჭებული ჭდე
+
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
+
+
+ Base locations for this operation
+ საბაზისო მდებარეობა ამ ოპერაციისთვის
+
+
+
+ Coolant mode for this operation
+ გამაგრილებლის რეჟიმი ამ ოპერაციისთვის
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Starting Depth of Tool- first cut depth in Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Final Depth of Tool- lowest value in Z
+
+
+
+ Incremental Step Down of Tool
+ Incremental Step Down of Tool
+
+
+
+ Maximum material removed on final pass.
+ ბოლო გავლისას მოცილებული მასალების მაქსიმუმი.
+
+
+
+ Rapid Safety Height between locations.
+ Rapid Safety Height between locations.
+
+
+
+ The start point of this path
+ ამ ტრაექტორიის საწყისი წერტილი
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ გამაგრილებლის მორგება ამ ოპერაციისთვის
+
Additional base objects to be engraved
@@ -256,7 +371,7 @@
Vcarve Tolerance
- Vcarve Tolerance
+ Vcarve-ს გადახრა
@@ -291,12 +406,12 @@
Length or Radius of the approach
- Length or Radius of the approach
+ მიდგომის რადიუსის სიგრძე
The Style of motion into the Path
- The Style of motion into the Path
+ ტრაექტორიაზე მოძრაობის სტილი
@@ -333,11 +448,6 @@
Fixture Offset Number
Fixture Offset Number
-
-
- Make False, to prevent operation from generating code
- Make False, to prevent operation from generating code
-
Shape for bit shape
@@ -351,12 +461,12 @@
The file of the tool
- The file of the tool
+ ხელსაწყოს ნახაზის ფაილი
The name of the shape file
- The name of the shape file
+ ფორმის ფაილის სახელი
@@ -366,7 +476,12 @@
The gcode to be inserted
- The gcode to be inserted
+ G-Code-ის ჩაისმება
+
+
+
+ Angle of ramp.
+ Angle of ramp.
@@ -383,6 +498,36 @@
Custom feed rate
Custom feed rate
+
+
+ Width of tags.
+ Width of tags.
+
+
+
+ Height of tags.
+ ჭდეების სიმაღლე.
+
+
+
+ Angle of tag plunge and ascent.
+ Angle of tag plunge and ascent.
+
+
+
+ Radius of the fillet for the tag.
+ Radius of the fillet for the tag.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
Incremental Drill depth before retracting to clear chips
@@ -401,7 +546,7 @@
Enable dwell
- Enable dwell
+ დაყოვნების ჩართვა
@@ -526,7 +671,7 @@
Comment or note for CNC program
- Comment or note for CNC program
+ კომენტარი ან შენიშვნა CNC პროგრამისთვის
@@ -541,12 +686,12 @@
Coolant Modes
- Coolant Modes
+ გამაგრილებლის რეჟიმები
Default coolant mode.
- Default coolant mode.
+ გამაგრილებლის ნაგულისხმევი რეჟიმი.
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
ახალი ოპერაციების StepDown-თვის გამოყენებული გამოთქმა.
-
-
- Start pocketing at center or boundary
- Start pocketing at center or boundary
-
-
-
- Percent of cutter diameter to step over on each pass
- Percent of cutter diameter to step over on each pass
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Extra offset to apply to the operation. Direction is operation dependent.
+
+
+ Start pocketing at center or boundary
+ Start pocketing at center or boundary
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Percent of cutter diameter to step over on each pass
+
Angle of the zigzag pattern
@@ -601,13 +746,38 @@
Use 3D Sorting of Path
- Use 3D Sorting of Path
+ ტრაექტორიის 3D დალაგების გამოყენება
Attempts to avoid unnecessary retractions.
Attempts to avoid unnecessary retractions.
+
+
+ The side of path to insert bones
+ The side of path to insert bones
+
+
+
+ The style of bones
+ The style of bones
+
+
+
+ Bones that aren't dressed up
+ Bones that aren't dressed up
+
+
+
+ The algorithm to determine the bone length
+ The algorithm to determine the bone length
+
+
+
+ Dressup length if Incision == custom
+ Dressup length if Incision == custom
+
Add Optional or Mandatory Stop to the program
@@ -616,12 +786,12 @@
The path(s) to array
- The path(s) to array
+ ტრაექტორი(ებ)-იდან მასივამდე
Pattern method
- Pattern method
+ შაბლონის მეთოდი
@@ -671,13 +841,18 @@
Maximum random offset of copies
- Maximum random offset of copies
+ ასლების მაქსიმალური შემთხვევითი წანაცვლება
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ ხელით მითითებული თვისებების სია
+
The point file from the surface probing.
@@ -691,27 +866,27 @@
Set thread orientation
- Set thread orientation
+ დააყენეთ კუთხვილის ორიენტაცია
Currently only internal
- Currently only internal
+ მიმდინარედ მხოლოდ შიდა
Defines which standard thread was chosen
- Defines which standard thread was chosen
+ აყენებს, რომელი სტანდარტული კუთხვილი იქნა არჩეული
Set thread's major diameter
- Set thread's major diameter
+ დააყენეთ კუთხვილის ძირითადი დიამეტრი
Set thread's minor diameter
- Set thread's minor diameter
+ დააყენეთ კუთხვილის მცირე დიამეტრი
@@ -721,17 +896,17 @@
Set how many passes are used to cut the thread
- Set how many passes are used to cut the thread
+ დაყენება, რამდენი გავლაა საჭირო კუთხვილის ამოსაჭრელად
Direction of thread cutting operation
- Direction of thread cutting operation
+ კუთხვილის ამოჭრის ოპერაციის მიმართულება
Operation to clear the inside of the thread
- Operation to clear the inside of the thread
+ კუთხვილის შიგნიდან გაწმენდის ოპერაცია
@@ -746,17 +921,17 @@
How to join chamfer segments
- How to join chamfer segments
+ როგორ შევაერთოთ კუთხის ნაზოლის სეგმენტები
Direction of Operation
- Direction of Operation
+ ოპერაციის მიმართულება
Side of Operation
- Side of Operation
+ ოპერაციის მხარე
@@ -806,22 +981,22 @@
Split Arcs into discrete segments
- Split Arcs into discrete segments
+ რკალების დისკრეტულ სეგმენტებად დაყოფა
The active tool
- The active tool
+ მიმდინარე ხელსაწყო
The speed of the cutting spindle in RPM
- The speed of the cutting spindle in RPM
+ მჭრელი შპინდელის ბრუნების რაოდენობა წუთში
Direction of spindle rotation
- Direction of spindle rotation
+ შპინდელის ბრუნვის მიმართულება
@@ -846,7 +1021,77 @@
The tool used by this controller
- The tool used by this controller
+ ამ კონტროლერის მიერ გამოყენებული ხელსაწყო
+
+
+
+ List of disabled features
+ გამორთული თვისებების სია
+
+
+
+ The NC output file for this project
+ The NC output file for this project
+
+
+
+ Select the Post Processor
+ აირჩიეთ პოსტპროცესორი
+
+
+
+ Last Time the Job was post-processed
+ Last Time the Job was post-processed
+
+
+
+ An optional description for this job
+ ამ ამოცანის არასავალდებულო აღწერა
+
+
+
+ Job Cycle Time Estimation
+ Job Cycle Time Estimation
+
+
+
+ Solid object to be used as stock.
+ Solid object to be used as stock.
+
+
+
+ Select the Type of Job
+ აირჩიეთ ამოცანის ტიპი
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ SetupSheet holding the settings for this job
+ SetupSheet holding the settings for this job
+
+
+
+ The base objects for all operations
+ ყველა ოპერაციის საბაზისო ობიექტები
+
+
+
+ Collection of all tool controllers for the job
+ ამოცანის ხელსაწყოების ყველა კონტროლერის კრებული
@@ -876,7 +1121,7 @@
Profile round holes
- Profile round holes
+ პროფილის მრგვალი ხვრელები
@@ -919,7 +1164,7 @@
Ignoring vertex
- Ignoring vertex
+ ვერტექსის იგნორი
@@ -934,28 +1179,28 @@
Issue determine drillability: {}
- Issue determine drillability: {}
+ ხვრეტადობის დადგენის შეცდომა: {}
Didn't find job %s
- Didn't find job %s
-
-
-
- Legacy Tools not supported
- Legacy Tools not supported
-
-
-
- Selected tool is not a drill
- Selected tool is not a drill
+ ამოცანა %s ვერ ვიპოვე
Illegal arc: Start and end radii not equal
Illegal arc: Start and end radii not equal
+
+
+ Legacy Tools not supported
+ მოძველებული ხელსაწყოების მხარდაჭერა გამორთულია
+
+
+
+ Selected tool is not a drill
+ არჩეული ხელსაწყო ბურღი არაა
+
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -979,12 +1224,12 @@
No coolant property found. Please recreate operation.
- No coolant property found. Please recreate operation.
+ გამაგრილებლის თვისება ნაპოვნი არაა. გთხოვთ, თავიდან შექმენით ოპერაცია.
No Tool Controller selected.
- No Tool Controller selected.
+ ხელსაწყოს კონტროლერი არჩეული არაა.
@@ -994,17 +1239,17 @@
Feedrate Error
- Feedrate Error
+ მიწოდების სიჩქარის შეცდომა
Cycletime Error
- Cycletime Error
+ ციკლის დროის შეცდომა
Base object %s.%s already in the list
- Base object %s.%s already in the list
+ საბაზისო ობიექტი %s.%s უკვე სიაშია
@@ -1024,7 +1269,7 @@
Invalid Filename
- Invalid Filename
+ ფაილის არასწორი სახელი
@@ -1036,11 +1281,6 @@
CCW
სსს
-
-
- List of disabled features
- List of disabled features
-
Project Setup
@@ -1074,7 +1314,7 @@
Path Dressup
- Path Dressup
+ ტრაექტორიის ზღუდარი
@@ -1089,7 +1329,7 @@
Supplemental Commands
- Supplemental Commands
+ დამატებითი ბრძანებები
@@ -1101,6 +1341,11 @@
Utils
ხელსაწყოები
+
+
+ List of disabled features
+ გამორთული თვისებების სია
+
Choose a writable location for your toolbits
@@ -1139,12 +1384,12 @@
Pick Start Point
- Pick Start Point
+ აირჩიეთ საწყისი წერტილი
Unable to create path for face(s).
- Unable to create path for face(s).
+ ტრაექტორიის შექმნა ზედაპირ(ებ)-ისთვის შეუძლებელია.
@@ -1160,7 +1405,7 @@
job %s has no Base.
- job %s has no Base.
+ ამოცანა %s-ს ბაზა არ გააჩნია.
@@ -1203,17 +1448,17 @@
How to join chamfer segments
- How to join chamfer segments
+ როგორ შევაერთოთ კუთხის ნაზოლის სეგმენტები
Direction of Operation
- Direction of Operation
+ ოპერაციის მიმართულება
Side of Operation
- Side of Operation
+ ოპერაციის მხარე
@@ -1241,35 +1486,27 @@
Creates a Deburr Path along Edges or around Faces
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Edit HoldingTags Dress-up
-
-
PathFeatureExtensions
Click to enable Extensions
- Click to enable Extensions
+ დააწკაპუნეთ გაფართოებების ჩასართავად
Click to include Edges/Wires
- Click to include Edges/Wires
+ დააწკაპუნეთ წიბოების/პოლიხაზების ჩასართავად
Extensions enabled
- Extensions enabled
+ გაფართოებები ჩართულია
Including Edges/Wires
- Including Edges/Wires
+ წიბოების/პოლიხაზების ჩათვლით
@@ -1305,17 +1542,17 @@
isVertical(%s) not supported
- isVertical(%s) not supported
+ isVertical(%s) მხარდაჭერილი არაა
isHorizontal(%s) not supported
- isHorizontal(%s) not supported
+ isHorizontal(%s) მხარდაჭერილი არაა
%s not supported for flipping
- %s not supported for flipping
+ %s-ს არ აქვს გადაბრუნების მხარდაჭერა
@@ -1333,21 +1570,11 @@
Cannot find property %s of %s
- Cannot find property %s of %s
+ %s-ს არ გააჩნია თვისება %s
PathJob
-
-
- Unsupported stock object %s
- Unsupported stock object %s
-
-
-
- Unsupported stock type %s (%d)
- Unsupported stock type %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
Stock not a cylinder!
+
+
+ Unsupported stock object %s
+ Unsupported stock object %s
+
+
+
+ Unsupported stock type %s (%d)
+ Unsupported stock type %s (%d)
+
The NC output file for this project
@@ -1371,7 +1608,7 @@
Select the Post Processor
- Select the Post Processor
+ აირჩიეთ პოსტპროცესორი
@@ -1386,33 +1623,13 @@
An optional description for this job
- An optional description for this job
+ ამ ამოცანის არასავალდებულო აღწერა
Solid object to be used as stock.
Solid object to be used as stock.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Split output into multiple gcode files
-
-
-
- If multiple WCS, order the output this way
- If multiple WCS, order the output this way
-
-
-
- The Work Coordinate Systems for the Job
- The Work Coordinate Systems for the Job
-
SetupSheet holding the settings for this job
@@ -1421,12 +1638,32 @@
The base objects for all operations
- The base objects for all operations
+ ყველა ოპერაციის საბაზისო ობიექტები
Collection of all tool controllers for the job
- Collection of all tool controllers for the job
+ ამოცანის ხელსაწყოების ყველა კონტროლერის კრებული
+
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ Select the Type of Job
+ აირჩიეთ ამოცანის ტიპი
@@ -1461,7 +1698,7 @@
Cylinder: %.2f x %.2f
- Cylinder: %.2f x %.2f
+ ცილინდრი: %.2f %.2f-ზე
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- The base geometry for this operation
-
-
-
- Holds the calculated value for the StartDepth
- Holds the calculated value for the StartDepth
-
-
-
- Holds the calculated value for the FinalDepth
- Holds the calculated value for the FinalDepth
-
-
-
- Holds the diameter of the tool
- Holds the diameter of the tool
-
-
-
- Holds the max Z value of Stock
- Holds the max Z value of Stock
-
-
-
- Holds the min Z value of Stock
- Holds the min Z value of Stock
-
-
-
- Make False, to prevent operation from generating code
- Make False, to prevent operation from generating code
-
-
-
- An optional comment for this Operation
- An optional comment for this Operation
-
-
-
- User Assigned Label
- User Assigned Label
-
-
-
- Operations Cycle Time Estimation
- Operations Cycle Time Estimation
-
-
-
- Base locations for this operation
- Base locations for this operation
-
-
-
- Coolant mode for this operation
- Coolant mode for this operation
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Starting Depth of Tool- first cut depth in Z
-
-
-
- Final Depth of Tool- lowest value in Z
- Final Depth of Tool- lowest value in Z
-
-
-
- Starting Depth internal use only for derived values
- Starting Depth internal use only for derived values
-
-
-
- Incremental Step Down of Tool
- Incremental Step Down of Tool
-
-
-
- Maximum material removed on final pass.
- Maximum material removed on final pass.
-
-
-
- The height needed to clear clamps and obstructions
- The height needed to clear clamps and obstructions
-
-
-
- Rapid Safety Height between locations.
- Rapid Safety Height between locations.
-
-
-
- The start point of this path
- The start point of this path
-
-
-
- Make True, if specifying a Start Point
- Make True, if specifying a Start Point
-
-
-
- Lower limit of the turning diameter
- Lower limit of the turning diameter
-
-
-
- Upper limit of the turning diameter.
- Upper limit of the turning diameter.
-
-
-
- Coolant option for this operation
- Coolant option for this operation
-
Edit
@@ -1604,22 +1721,22 @@
Vertexes are not supported
- Vertexes are not supported
+ წვეროები მხარდაჭერილი არაა
Edges are not supported
- Edges are not supported
+ წიბოები მხარდაჭერილი არაა
Faces are not supported
- Faces are not supported
+ ზედაპირები მხარდაჭერილი არაა
Mulitiple operations are labeled as
- Mulitiple operations are labeled as
+ ოპერაციების ჯგუფი მონიშნულია, როგორც
@@ -1666,25 +1783,145 @@ If it is necessary to set the FinalDepth manually please select a different oper
Pick Start Point
- Pick Start Point
+ აირჩიეთ საწყისი წერტილი
+
+
+
+ Make False, to prevent operation from generating code
+ გამორთეთ ოპერაციისთვის კოდის გენერაციის ხელის შესაშლელად
+
+
+
+ The base geometry for this operation
+ ამ ოპერაციის საბაზისო გეომეტრია
+
+
+
+ Holds the calculated value for the StartDepth
+ Holds the calculated value for the StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ შეიცავს საბოლოო სიღრმის გამოთვლილ მნიშვნელობას
+
+
+
+ Holds the diameter of the tool
+ ამ ხელსაწყოს დიამეტრის შეზღუდვა
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ An optional comment for this Operation
+ An optional comment for this Operation
+
+
+
+ User Assigned Label
+ მომხმარებლის მიერ მინიჭებული ჭდე
+
+
+
+ Base locations for this operation
+ საბაზისო მდებარეობა ამ ოპერაციისთვის
+
+
+
+ Coolant mode for this operation
+ გამაგრილებლის რეჟიმი ამ ოპერაციისთვის
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Starting Depth of Tool- first cut depth in Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Final Depth of Tool- lowest value in Z
+
+
+
+ Starting Depth internal use only for derived values
+ Starting Depth internal use only for derived values
+
+
+
+ Incremental Step Down of Tool
+ Incremental Step Down of Tool
+
+
+
+ Maximum material removed on final pass.
+ ბოლო გავლისას მოცილებული მასალების მაქსიმუმი.
+
+
+
+ The height needed to clear clamps and obstructions
+ The height needed to clear clamps and obstructions
+
+
+
+ Rapid Safety Height between locations.
+ Rapid Safety Height between locations.
+
+
+
+ The start point of this path
+ ამ ტრაექტორიის საწყისი წერტილი
+
+
+
+ Make True, if specifying a Start Point
+ ჩართვა, თუ საწყისი წერტილი მიეთითება
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ გამაგრილებლის მორგება ამ ოპერაციისთვის
Job Cycle Time Estimation
Job Cycle Time Estimation
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
PathPlane
Selection Plane
- Selection Plane
+ სიბრტყის არჩევა
Create a Selection Plane object
- Create a Selection Plane object
+ მონიშნული სიბრტყის ობიექტის შექმნა
@@ -1735,29 +1972,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Final depth set below ZMin of face(s) selected.
-
- PathPocketShape
-
-
- Default length of extensions.
- Default length of extensions.
-
-
-
- List of features to extend.
- List of features to extend.
-
-
-
- When enabled connected extension edges are combined to wires.
- When enabled connected extension edges are combined to wires.
-
-
-
- Uses the outline of the base geometry.
- Uses the outline of the base geometry.
-
-
PathProfile
@@ -1778,12 +1992,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
New property added to
- New property added to
+ ახალი თვისება დაემატა
Check its default value.
- Check its default value.
+ შეამოწმეთ ნაგულისხმევი მნიშვნელობა.
@@ -1818,7 +2032,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Unable to create path for face(s).
- Unable to create path for face(s).
+ ტრაექტორიის შექმნა ზედაპირ(ებ)-ისთვის შეუძლებელია.
@@ -1831,55 +2045,27 @@ If it is necessary to set the FinalDepth manually please select a different oper
For open edges, verify Final Depth for this operation.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Edit PropertyBag
-
-
-
- Create PropertyBag
- Create PropertyBag
-
-
-
- PropertyBag
- PropertyBag
-
-
-
- Creates an object which can be used to store reference properties.
- Creates an object which can be used to store reference properties.
-
-
-
- List of custom property groups
- List of custom property groups
-
-
PathSlot
New property added to
- New property added to
+ ახალი თვისება დაემატა
Check default value(s).
- Check default value(s).
+ ნაგულისხმევი მნიშვნელობების შემოწმება.
No Base Geometry object in the operation.
- No Base Geometry object in the operation.
+ ოპერაციაში არ არსებობს საბაზისო გეომეტრიის ობიექტი.
Custom points are identical.
- Custom points are identical.
+ ხელით მითითებული წერტილები ერთი და იგივეა.
@@ -1909,7 +2095,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
The selected face is inaccessible.
- The selected face is inaccessible.
+ მონიშნული ზედაპირი ხელმიუწვდომელია.
@@ -1924,7 +2110,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
No parallel edges identified.
- No parallel edges identified.
+ პარალელური წიბოები ნაპოვნი არაა.
@@ -1944,17 +2130,17 @@ If it is necessary to set the FinalDepth manually please select a different oper
Failed to determine point 1 from
- Failed to determine point 1 from
+ წერტილი 1-ის დადგენის შეცდომა
Failed to determine point 2 from
- Failed to determine point 2 from
+ წერტილი 2-ის დადგენის შეცდომა
Selected geometry not parallel.
- Selected geometry not parallel.
+ არჩეული გეომეტრია პარალელური არაა.
@@ -2080,12 +2266,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
New property added to
- New property added to
+ ახალი თვისება დაემატა
Check default value(s).
- Check default value(s).
+ ნაგულისხმევი მნიშვნელობების შემოწმება.
@@ -2095,7 +2281,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Initializing LinearDeflection to 0.001 mm.
- Initializing LinearDeflection to 0.001 mm.
+ LinearDeflection-ის საწყისი მნიშვნელობაა 0.0001 მმ.
@@ -2135,7 +2321,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
operation time is
- operation time is
+ ოპერაციის დრო
@@ -2145,12 +2331,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
No profile geometry shape returned.
- No profile geometry shape returned.
+ პროფილის გეომეტრიის მოხაზულობის მიღების შეცდომა.
No profile path geometry returned.
- No profile path geometry returned.
+ პროფილის ტრაექტორიის გეომეტრის მიღების შეცდომა.
@@ -2160,7 +2346,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
No clearing path geometry returned.
- No clearing path geometry returned.
+ გასუფთავების ტრაექტორიის გეომეტრიის მიღების შეცდომა.
@@ -2180,7 +2366,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Failed to translate active tool to OCL tool type.
- Failed to translate active tool to OCL tool type.
+ აქტიური ხელსაწყოს OCL ხელსაწყოს ტიპად გარდაქმნის შეცდომა.
@@ -2198,7 +2384,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Cannot calculate the Center Of Mass.
- Cannot calculate the Center Of Mass.
+ მასის ცენტრის გამოთვლა შეუძლებელია.
@@ -2213,7 +2399,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Ignoring selected faces.
- Ignoring selected faces.
+ მონიშნული ზედაპირების იგნორი.
@@ -2228,7 +2414,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Failed to create offset face.
- Failed to create offset face.
+ ზედაპირის წანაცვლების შექმნის შეცდომა.
@@ -2248,7 +2434,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Faild to extract processing region for Face
- Faild to extract processing region for Face
+ ზედაპირიდან დასამუშავებელი რეგიონის ამოღების შეცდომა
@@ -2306,12 +2492,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
The file of the tool
- The file of the tool
+ ხელსაწყოს ნახაზის ფაილი
The name of the shape file
- The name of the shape file
+ ფორმის ფაილის სახელი
@@ -2379,12 +2565,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Tool Table Same Name
- Tool Table Same Name
+ ხელსაწყოების ცხრილის გამეორებადი სახელი
Tool Table Name Exists
- Tool Table Name Exists
+ ხელსაწყოების ცხრილის სახელი უკვე არსებობს
@@ -2412,12 +2598,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
New property added to
- New property added to
+ ახალი თვისება დაემატა
Check default value(s).
- Check default value(s).
+ ნაგულისხმევი მნიშვნელობების შემოწმება.
@@ -2427,12 +2613,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Initializing LinearDeflection to 0.0001 mm.
- Initializing LinearDeflection to 0.0001 mm.
+ LinearDeflection-ის საწყისი მნიშვნელობაა 0.0001 მმ.
Sample interval limits are 0.0001 to 25.4 millimeters.
- Sample interval limits are 0.0001 to 25.4 millimeters.
+ სემპლის ინტერვალის ლიმიტი მერყეობს 0.0001-სა და 25.4 მმ-ს შორის.
@@ -2467,7 +2653,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
operation time is
- operation time is
+ ოპერაციის დრო
@@ -2493,12 +2679,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Clearing
- Clearing
+ გასუფთავება
Profiling
- Profiling
+ პროფილირება
@@ -2508,7 +2694,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Adaptive clearing and profiling
- Adaptive clearing and profiling
+ ადაპტიური გაწმენდა და პროფილირება
@@ -2557,7 +2743,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Creates a linked copy of another path
- Creates a linked copy of another path
+ სხვა ტრაექტორიაზე მიბმული ასლის შექმნა
@@ -2597,20 +2783,20 @@ If it is necessary to set the FinalDepth manually please select a different oper
Please select one path object
- Please select one path object
+ გთხოვთ აირჩიოთ ერთი ტრაექტორიის ობიექტი
The selected object is not a path
- The selected object is not a path
+ მონიშნული ობიექტი მისამართი არაა
Please select a Path object
- Please select a Path object
+ აირჩიეთ ტრაექტორიის ობიექტი
@@ -2643,7 +2829,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
The base path to modify
- The base path to modify
+ ჩასასწორებელი საბაზისო ტრაექტორია
@@ -2651,7 +2837,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
The base path to modify
- The base path to modify
+ ჩასასწორებელი საბაზისო ტრაექტორია
@@ -2696,12 +2882,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Please select one path object
- Please select one path object
+ გთხოვთ აირჩიოთ ერთი ტრაექტორიის ობიექტი
The selected object is not a path
- The selected object is not a path
+ მონიშნული ობიექტი ტრაექტორია არაა
@@ -2724,17 +2910,17 @@ If it is necessary to set the FinalDepth manually please select a different oper
Please select one path object
- Please select one path object
+ გთხოვთ აირჩიოთ ერთი ტრაექტორიის ობიექტი
The selected object is not a path
- The selected object is not a path
+ მონიშნული ობიექტი ტრაექტორია არაა
Please select a Path object
- Please select a Path object
+ აირჩიეთ ტრაექტორიის ობიექტი
@@ -2792,7 +2978,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Length/Radius positive not Null
- Length/Radius positive not Null
+ სიგრძე/რადიუსი უნდა იყოს ნულზე მეტი
@@ -2812,17 +2998,17 @@ If it is necessary to set the FinalDepth manually please select a different oper
Please select one path object
- Please select one path object
+ გთხოვთ აირჩიოთ ერთი ტრაექტორიის ობიექტი
The selected object is not a path
- The selected object is not a path
+ მონიშნული ობიექტი ტრაექტორია არაა
Please select a Profile object
- Please select a Profile object
+ გთხოვთ, აირჩიეთ პროფილის ტიპის ობიექტი
@@ -2845,7 +3031,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Please select one path object
- Please select one path object
+ გთხოვთ აირჩიოთ ერთი ტრაექტორიის ობიექტი
@@ -2855,12 +3041,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
The base path to modify
- The base path to modify
+ ჩასასწორებელი საბაზისო ტრაექტორია
Solid object to be used to limit the generated Path.
- Solid object to be used to limit the generated Path.
+ გენერირებული ტრაექტორიის შესაზღუდად გამოყენებული მყარი სხეული.
@@ -2870,7 +3056,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
The selected object is not a path
- The selected object is not a path
+ მონიშნული ობიექტი ტრაექტორია არაა
@@ -2878,25 +3064,125 @@ If it is necessary to set the FinalDepth manually please select a different oper
The base path to modify
- The base path to modify
+ ჩასასწორებელი საბაზისო ტრაექტორია
Angle of ramp.
Angle of ramp.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ სპირალები
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ მომხმარებლის
+
RampEntry Dress-up
RampEntry Dress-up
+
+
+ Please select one path object
+ გთხოვთ აირჩიოთ ერთი ტრაექტორიის ობიექტი
+
+
+
+ The selected object is not a path
+ მონიშნული ობიექტი ტრაექტორია არაა
+
+
+
+ Please select a Profile object
+ გთხოვთ, აირჩიეთ პროფილის ტიპის ობიექტი
+
Path_DressupTag
+
+
+ The selected object is not a path
+ მონიშნული ობიექტი ტრაექტორია არაა
+
+
+
+ Please select a Profile object
+ გთხოვთ, აირჩიეთ პროფილის ტიპის ობიექტი
+
+
+
+ Holding Tag
+ Holding Tag
+
+
+
+ Cannot copy tags - internal error
+ ჭდეების კოპირება შეუძლებელია - შიდა შეცდომა
+
+
+
+ Create a Tag dressup
+ ჭდის ზღუდარის შექმნა
+
+
+
+ Tag Dress-up
+ Tag Dress-up
+
+
+
+ Creates a Tag Dress-up object from a selected path
+ Creates a Tag Dress-up object from a selected path
+
+
+
+ Please select one path object
+ გთხოვთ აირჩიოთ ერთი ტრაექტორიის ობიექტი
+
+
+
+ Create Tag Dress-up
+ ჭდის ზღუდარის შექმნა
+
The base path to modify
- The base path to modify
+ ჩასასწორებელი საბაზისო ტრაექტორია
@@ -2933,60 +3219,10 @@ If it is necessary to set the FinalDepth manually please select a different oper
Factor determining the # of segments used to approximate rounded tags.
Factor determining the # of segments used to approximate rounded tags.
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Cannot insert holding tags for this path - please select a Profile path
-
-
-
- The selected object is not a path
- The selected object is not a path
-
-
-
- Please select a Profile object
- Please select a Profile object
-
-
-
- Holding Tag
- Holding Tag
-
-
-
- Cannot copy tags - internal error
- Cannot copy tags - internal error
-
-
-
- Create a Tag dressup
- Create a Tag dressup
-
-
-
- Tag Dress-up
- Tag Dress-up
-
-
-
- Creates a Tag Dress-up object from a selected path
- Creates a Tag Dress-up object from a selected path
-
-
-
- Please select one path object
- Please select one path object
-
-
-
- Create Tag Dress-up
- Create Tag Dress-up
-
No Base object found.
- No Base object found.
+ საბაზისო ობიექტები ნაპოვნი არაა.
@@ -3001,7 +3237,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Base Path is empty.
- Base Path is empty.
+ საბაზისო ტრაექტორია ცარიელია.
+
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Cannot insert holding tags for this path - please select a Profile path
@@ -3042,12 +3283,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
G99
- G99
+ G99
G98
- G98
+ G98
@@ -3057,12 +3298,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Drill Tip
- Drill Tip
+ ბურღის წვერი
2x Drill Tip
- 2x Drill Tip
+ 2x ბურღის წვერი
@@ -3096,6 +3337,19 @@ If it is necessary to set the FinalDepth manually please select a different oper
Engraving Operations
+
+ Path_ExportTemplate
+
+
+ Export Template
+ შაბლონის გატანა
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Exports Path Job as a template to be used for other jobs
+
+
Path_Helix
@@ -3129,17 +3383,17 @@ If it is necessary to set the FinalDepth manually please select a different oper
Creates a Path Hop object
- Creates a Path Hop object
+ ტრაექტორიის ბიჯის ობიექტის შექმნა
Please select one path object
- Please select one path object
+ გთხოვთ აირჩიოთ ერთი ტრაექტორიის ობიექტი
The selected object is not a path
- The selected object is not a path
+ მონიშნული ობიექტი ტრაექტორია არაა
@@ -3157,7 +3411,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Inspect G-code
- Inspect G-code
+ G-code-ის გავლა
@@ -3167,7 +3421,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Please select exactly one path object
- Please select exactly one path object
+ გთხოვთ აირჩიოთ ზუსტად ერთი ტრაექტორიის ობიექტი
@@ -3180,18 +3434,28 @@ If it is necessary to set the FinalDepth manually please select a different oper
Creates a Path Job object
- Creates a Path Job object
+ ტრაექტორიის ამოცანის ობიექტის შექმნა
Export Template
- Export Template
+ შაბლონის გატანა
Exports Path Job as a template to be used for other jobs
Exports Path Job as a template to be used for other jobs
+
+
+ Edit
+ ჩასწორება
+
+
+
+ Stock not a cylinder!
+ Stock not a cylinder!
+
Edit Job
@@ -3200,7 +3464,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Uncreate Job
- Uncreate Job
+ ამოცანის შექმნის გაუქმება
@@ -3212,6 +3476,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
All Files (*.*)
ყველა ფაილი (*.*)
+
+
+ Unsupported stock object %s
+ Unsupported stock object %s
+
+
+
+ Unsupported stock type %s (%d)
+ Unsupported stock type %s (%d)
+
Model Selection
@@ -3222,6 +3496,71 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Job
დავალების შექმნა
+
+
+ Fixture
+ Fixture
+
+
+
+ Tool
+ ხელსაწყო
+
+
+
+ Operation
+ ოპერაცია
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ მასივები
+
+
+
+ Jobs
+ დავალებები
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Box: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ ცილინდრი: %.2f %.2f-ზე
+
+
+
+ Unsupported stock type
+ Unsupported stock type
+
Path_MillFace
@@ -3244,12 +3583,30 @@ If it is necessary to set the FinalDepth manually please select a different oper
Toggle the Active State of the Operation
+
+ Path_Operation
+
+
+ None
+ არცერთი
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
Copy the operation in the job
- Copy the operation in the job
+ ოპერაციის ამოცანაში კოპირება
@@ -3322,7 +3679,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
ZigZagOffset
- ZigZagOffset
+ ზიგზაგის წანაცვლება
@@ -3342,7 +3699,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
3D Pocket
- 3D Pocket
+ 3D ჯიბე
@@ -3365,7 +3722,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
3D Pocket
- 3D Pocket
+ 3D ჯიბე
@@ -3391,17 +3748,17 @@ If it is necessary to set the FinalDepth manually please select a different oper
Post Process
- Post Process
+ პოსტპროცესორი
Post Process the selected Job
- Post Process the selected Job
+ მონიშნული ამოცანის პოსტპროცესი
Post Process the Selected path(s)
- Post Process the Selected path(s)
+ მონიშნული ტრაექტორი(ებ)-ის პოსტპროცესინგი
@@ -3409,7 +3766,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Dressups
- Dressups
+ შეფუთვები
@@ -3417,7 +3774,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Select Probe Point File
- Select Probe Point File
+ არჩიეთ ზონდის წერტილის ფაილი
@@ -3453,12 +3810,20 @@ If it is necessary to set the FinalDepth manually please select a different oper
Profile entire model, selected face(s) or selected edge(s)
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
Check the path job for common errors
- Check the path job for common errors
+ ტრაექტორიის ამოცანის გავრცელებულ შეცდომებზე შემოწმება
@@ -3508,12 +3873,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Minimum Z Height
- Minimum Z Height
+ მინიმუმ Z სიმაღლე
Maximum Z Height
- Maximum Z Height
+ მაქსიმუმ Z სიმაღლე
@@ -3563,7 +3928,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Tool Controller
- Tool Controller
+ ხელსაწყოს კონტროლერი
@@ -3573,7 +3938,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Spindle Speed
- Spindle Speed
+ შპინდელის სიჩქარე
@@ -3628,7 +3993,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Last Post Process Date
- Last Post Process Date
+ ბოლო პოსტპროცესის თარიღი
@@ -3653,7 +4018,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Post Processor Flags
- Post Processor Flags
+ პოსტპროცესორის პარამეტრები
@@ -3686,7 +4051,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Finish Selecting Loop
- Finish Selecting Loop
+ მარყუჟის შექმნის დასრულება
@@ -3696,12 +4061,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Feature Completion
- Feature Completion
+ თვისების დასრულება
Closed loop detection failed.
- Closed loop detection failed.
+ მარყუჟების ძებნის შეცდომა.
@@ -3719,7 +4084,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Please select exactly one path object
- Please select exactly one path object
+ გთხოვთ აირჩიოთ ზუსტად ერთი ტრაექტორიის ობიექტი
@@ -3763,6 +4128,136 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ მომხმარებლის
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ Circular
+ მრგვალი
+
+
+
+ CircularZigZag
+ წრიული ზიგზაგი
+
+
+
+ Line
+ ხაზი
+
+
+
+ Offset
+ წანაცვლება
+
+
+
+ Spiral
+ ხვეული
+
+
+
+ ZigZag
+ ზიგზაგი
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ ერთად
+
+
+
+ Individually
+ ცალცალკე
+
+
+
+ Single-pass
+ ერთი-გავლით
+
+
+
+ Multi-pass
+ მრავალგავლადი
+
+
+
+ None
+ არცერთი
+
+
+
+ Only
+ მხოლოდ
+
+
+
+ First
+ პირველი
+
+
+
+ Last
+ ბოლო
+
+
+
+ Planar
+ ბრტყელი
+
+
+
+ Rotational
+ ბრუნვადი
+
3D Surface
@@ -3779,7 +4274,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Thread Milling
- Thread Milling
+ კუთხვილის ფრეზვა
@@ -3789,22 +4284,22 @@ If it is necessary to set the FinalDepth manually please select a different oper
Metric Internal
- Metric Internal
+ შიდა მეტრული
Imperial Internal
- Imperial Internal
+ შიდა იმპერიული
LeftHand
- LeftHand
+ მარცხნიდან
RightHand
- RightHand
+ მარჯვნიდან
@@ -3918,12 +4413,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Add Tool Controller to the Job
- Add Tool Controller to the Job
+ ამოცანაში ხელსაწყოს კონტროლერის ჩამატება
Add Tool Controller
- Add Tool Controller
+ ხელსაწყოს კონტროლერის დამატება
@@ -3941,12 +4436,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Open tooltable
- Open tooltable
+ ხელსაწყოების ცხრილის გახსნა
Save tooltable
- Save tooltable
+ ხელსაწყოების ცხრილის შენახვა
@@ -3961,17 +4456,17 @@ If it is necessary to set the FinalDepth manually please select a different oper
Add New Tool Table
- Add New Tool Table
+ ხელსაწყოების ახალი ცხრილის დამატება
Delete Selected Tool Table
- Delete Selected Tool Table
+ მონიშნული ხელსაწყოების ცხრილის წაშლა
Rename Selected Tool Table
- Rename Selected Tool Table
+ მონიშნული ხელსაწყოების ცხრილისთვის სახელის გადარქმევა
@@ -4015,6 +4510,183 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create a Waterline Operation from a model
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ This operation requires OpenCamLib to be installed.
+
+
+
+ OCL Dropcutter
+ OCL ფრეზირება
+
+
+
+ Experimental
+ ექსპერიმენტული
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ მომხმარებლის
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ მრგვალი
+
+
+
+ CircularZigZag
+ წრიული ზიგზაგი
+
+
+
+ Line
+ ხაზი
+
+
+
+ Offset
+ წანაცვლება
+
+
+
+ Spiral
+ ხვეული
+
+
+
+ ZigZag
+ ზიგზაგი
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ None
+ არცერთი
+
+
+
+ Collectively
+ ერთად
+
+
+
+ Individually
+ ცალცალკე
+
+
+
+ Single-pass
+ ერთი-გავლით
+
+
+
+ Multi-pass
+ მრავალგავლადი
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Edit HoldingTags Dress-up
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ გაფართოებებიის ნაგულისხმევი სიგრძე.
+
+
+
+ List of features to extend.
+ გასაფართოებელი თვისებების სია.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ When enabled connected extension edges are combined to wires.
+
+
+
+ Uses the outline of the base geometry.
+ Uses the outline of the base geometry.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Edit PropertyBag
+
+
+
+ Create PropertyBag
+ Create PropertyBag
+
+
+
+ PropertyBag
+ PropertyBag
+
+
+
+ Creates an object which can be used to store reference properties.
+ Creates an object which can be used to store reference properties.
+
+
+
+ List of custom property groups
+ ხელით მითითებული თვისებების სია
+
+
PathEngrave
@@ -4066,7 +4738,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Thread Milling
- Thread Milling
+ კუთხვილის ფრეზვა
@@ -4076,27 +4748,27 @@ If it is necessary to set the FinalDepth manually please select a different oper
Set thread orientation
- Set thread orientation
+ დააყენეთ კუთხვილის ორიენტაცია
Currently only internal
- Currently only internal
+ მიმდინარედ მხოლოდ შიდა
Defines which standard thread was chosen
- Defines which standard thread was chosen
+ აყენებს, რომელი სტანდარტული კუთხვილი იქნა არჩეული
Set thread's major diameter
- Set thread's major diameter
+ დააყენეთ კუთხვილის ძირითადი დიამეტრი
Set thread's minor diameter
- Set thread's minor diameter
+ დააყენეთ კუთხვილის მცირე დიამეტრი
@@ -4106,17 +4778,17 @@ If it is necessary to set the FinalDepth manually please select a different oper
Set thread's TPI (turns per inch) - used for imperial threads
- Set thread's TPI (turns per inch) - used for imperial threads
+ კუთხვილის TPI(შემოტრიალება დუიმზე) - გამოიყენება იმპერიული კუთხვილებისთვის
Set how many passes are used to cut the thread
- Set how many passes are used to cut the thread
+ დაყენება, რამდენი გავლაა საჭირო კუთხვილის ამოსაჭრელად
Direction of thread cutting operation
- Direction of thread cutting operation
+ კუთხვილის ამოჭრის ოპერაციის მიმართულება
@@ -4126,7 +4798,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Operation to clear the inside of the thread
- Operation to clear the inside of the thread
+ კუთხვილის შიგნიდან გაწმენდის ოპერაცია
@@ -4157,22 +4829,22 @@ If it is necessary to set the FinalDepth manually please select a different oper
Error updating TC: %s
- Error updating TC: %s
+ TC-ის განახლების შეცდომა: %s
The active tool
- The active tool
+ მიმდინარე ხელსაწყო
The speed of the cutting spindle in RPM
- The speed of the cutting spindle in RPM
+ მჭრელი შპინდელის ბრუნების რაოდენობა წუთში
Direction of spindle rotation
- Direction of spindle rotation
+ შპინდელის ბრუნვის მიმართულება
@@ -4207,7 +4879,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
The tool used by this controller
- The tool used by this controller
+ ამ კონტროლერის მიერ გამოყენებული ხელსაწყო
@@ -4284,12 +4956,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Open tooltable
- Open tooltable
+ ხელსაწყოების ცხრილის გახსნა
Save tooltable
- Save tooltable
+ ხელსაწყოების ცხრილის შენახვა
@@ -4304,17 +4976,17 @@ If it is necessary to set the FinalDepth manually please select a different oper
Add New Tool Table
- Add New Tool Table
+ ხელსაწყოების ახალი ცხრილის დამატება
Delete Selected Tool Table
- Delete Selected Tool Table
+ მონიშნული ხელსაწყოების ცხრილის წაშლა
Rename Selected Tool Table
- Rename Selected Tool Table
+ მონიშნული ხელსაწყოების ცხრილისთვის სახელის გადარქმევა
@@ -4322,7 +4994,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
The gcode to be inserted
- The gcode to be inserted
+ G-Code-ის ჩაისმება
@@ -4375,12 +5047,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Coolant Modes
- Coolant Modes
+ გამაგრილებლის რეჟიმები
Default coolant mode.
- Default coolant mode.
+ გამაგრილებლის ნაგულისხმევი რეჟიმი.
@@ -4388,7 +5060,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Issue determine drillability: {}
- Issue determine drillability: {}
+ ხვრეტადობის დადგენის შეცდომა: {}
@@ -4414,12 +5086,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Selection Plane
- Selection Plane
+ სიბრტყის არჩევა
Create a Selection Plane object
- Create a Selection Plane object
+ მონიშნული სიბრტყის ობიექტის შექმნა
@@ -4427,7 +5099,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Edit SetupSheet
- Edit SetupSheet
+ პარამეტრების გვერდის ჩასწორება
@@ -4435,7 +5107,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Mulitiple operations are labeled as
- Mulitiple operations are labeled as
+ ოპერაციების ჯგუფი მონიშნულია, როგორც
@@ -4443,17 +5115,17 @@ If it is necessary to set the FinalDepth manually please select a different oper
Vertexes are not supported
- Vertexes are not supported
+ წვეროები მხარდაჭერილი არაა
Edges are not supported
- Edges are not supported
+ წიბოები მხარდაჭერილი არაა
Faces are not supported
- Faces are not supported
+ ზედაპირები მხარდაჭერილი არაა
@@ -4525,7 +5197,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Creates a path from a selected shape
- Creates a path from a selected shape
+ ტრაექტორიის მონიშნული მონახაზიდან შექმნა
@@ -4533,12 +5205,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Path Area View
- Create Path Area View
+ ტრაექტორიის ფართის ხედის შექმნა
Create Path Area
- Create Path Area
+ ტრაექტორიის არეალის შექმნა
@@ -4548,12 +5220,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Path Compound
- Create Path Compound
+ შედგენილი ტრაექტორიის შექმნა
Create Path Shape
- Create Path Shape
+ ტრაექტორიის მოხაზულობის შექმნა
@@ -4581,7 +5253,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Select Base Models
- Select Base Models
+ არჩიეთ საბაზისო მოდელები
@@ -4611,7 +5283,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Post Processing
- Post Processing
+ დამუშავების შემდეგი მოქმედებები
@@ -4641,12 +5313,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Setup Sheet
- Setup Sheet
+ ფურცლის მორგება
Operation Depths
- Operation Depths
+ ოპერაციის სიღრმეები
@@ -4656,7 +5328,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Operation Heights
- Operation Heights
+ ოპერაციის სიმაღლეები
@@ -4676,12 +5348,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
<html><head/><body><p>Enable to include the default coolant mode in the template.</p></body></html>
- <html><head/><body><p>Enable to include the default coolant mode in the template.</p></body></html>
+ <html><head/><body><p>შაბლონში ნაგულისხმევი გამაგრილებლის რეჟიმის შენახვის ჩართვა.</p></body></html>
Coolant Mode
- Coolant Mode
+ გამაგრილებლის რეჟიმი
@@ -4731,7 +5403,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Post Processor
- Post Processor
+ პოსტპროცესორი
@@ -4741,7 +5413,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Tool Controller Editor
- Tool Controller Editor
+ ხელსაწყოს კონტროლერის რედაქტორი
@@ -4751,7 +5423,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Controller Name / Tool Number
- Controller Name / Tool Number
+ კონტროლერის სახელი / ხელსაწყოს ნომერი
@@ -4796,7 +5468,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Any modifications only affect this ToolController!
- Any modifications only affect this ToolController!
+ ნებოსმიერი ცვლილება მოქმედებს მხოლოდ ამ კონტროლერზე!
@@ -4906,7 +5578,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
<html><head/><body><p>Add New Tool Table</p></body></html>
- <html><head/><body><p>Add New Tool Table</p></body></html>
+ <html><head/><body><p>ხელსაწყოების ახალი ცხრილის დამატება</p></body></html>
@@ -4935,22 +5607,22 @@ If it is necessary to set the FinalDepth manually please select a different oper
Choose a Path Job
- Choose a Path Job
+ აირჩიეთ ტრაექტორიის ამოცანა
Choose a Tool Controller
- Choose a Tool Controller
+ აირჩიეთ ხელსაწყოს კონტროლერი
Tool Controller
- Tool Controller
+ ხელსაწყოს კონტროლერი
Copy Selected Tools
- Copy Selected Tools
+ მონიშნული ხელსაწყოების კოპირება
@@ -5009,7 +5681,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Boundary Body
- Boundary Body
+ გაბარიტული ზომები
@@ -5034,7 +5706,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Use Existing Solid
- Use Existing Solid
+ არსებული მყარი სხეულის გამოყენება
@@ -5411,7 +6083,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
ToolController
- ToolController
+ ხელსაწყოს კონტროლერი
@@ -5427,7 +6099,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Coolant Mode
- Coolant Mode
+ გამაგრილებლის რეჟიმი
@@ -5442,7 +6114,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Tool Controller
- Tool Controller
+ ხელსაწყოს კონტროლერი
@@ -5548,12 +6220,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Drill Tip
- Drill Tip
+ ბურღის წვერი
2x Drill Tip
- 2x Drill Tip
+ 2x ბურღის წვერი
@@ -5563,7 +6235,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Dwell
- Dwell
+ დაყოვნება
@@ -5573,12 +6245,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Extend Depth
- Extend Depth
+ სიღრმის მომატება
Start at Vertex
- Start at Vertex
+ წვეროსთან დაწყება
@@ -5631,12 +6303,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Click to disable Extensions
- Click to disable Extensions
+ დააწკაპუნეთ გაფართოებების გასათიშად
Ignore Edges and Wires
- Ignore Edges and Wires
+ წიბოებისა და პოლიხაზების იგნორი
@@ -5738,7 +6410,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Cut Mode
- Cut Mode
+ ამოჭრის რეჟიმი
@@ -5784,7 +6456,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
ZigZagOffset
- ZigZagOffset
+ ზიგზაგის წანაცვლება
@@ -5828,7 +6500,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Material Allowance
- Material Allowance
+ მასალის დასაშვებობა
@@ -5838,7 +6510,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Min Travel
- Min Travel
+ მინიმალური გზა
@@ -5860,7 +6532,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Use Start Point
- Use Start Point
+ სასტარტო წერტილის გამოყენება
@@ -5935,7 +6607,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Extra Offset
- Extra Offset
+ დამატებითი წანაცვლება
@@ -5950,7 +6622,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Process Holes
- Process Holes
+ ნახვრეტების დამუშავება
@@ -5970,7 +6642,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Process Circles
- Process Circles
+ პროცესების წრეები
@@ -5980,7 +6652,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Process Perimeter
- Process Perimeter
+ პერიმეტრის დამუშავება
@@ -6009,7 +6681,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Highest Point
- Highest Point
+ უმაღლესი წერტილი
@@ -6050,7 +6722,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
No Base Geometry selected.
- No Base Geometry selected.
+ საბაზისო გეომეტრია არჩეული არაა.
@@ -6065,7 +6737,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Extend Path End
- Extend Path End
+ ტრაექტორიის ბოლოს დაგრძელება
@@ -6080,7 +6752,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Extend Path Start
- Extend Path Start
+ ტრაექტორიის დასაწყისის გაგრძელება
@@ -6107,7 +6779,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path Orientation
- Path Orientation
+ ტრაექტორიის ორიენტაცია
@@ -6178,7 +6850,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Optimize Linear Paths
- Optimize Linear Paths
+ ხაზოვანი ტრაექტორიების ოპტიმიზაცია
@@ -6250,7 +6922,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
CircularZigZag
- CircularZigZag
+ წრიული ზიგზაგი
@@ -6282,7 +6954,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Depth offset
- Depth offset
+ სიღრმის წანაცვლება
@@ -6317,7 +6989,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Profile Edges
- Profile Edges
+ პროფილის წიბოები
@@ -6337,7 +7009,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Thread
- Thread
+ ძაფი
@@ -6347,7 +7019,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Left Hand
- Left Hand
+ მარცხნიდან
@@ -6368,7 +7040,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Metric - internal
- Metric - internal
+ მეტრული - შიდა
@@ -6425,7 +7097,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Discretization Deflection
- Discretization Deflection
+ ანარეკლის დისკრეტიზაცია
@@ -6455,7 +7127,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
OCL Dropcutter
- OCL Dropcutter
+ OCL ფრეზირება
@@ -6620,7 +7292,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Length Offset
- Length Offset
+ სიგრძის წანაცვლება
@@ -6639,7 +7311,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Tool Parameter
- Tool Parameter
+ ხელსაწყოს პარამეტრი
@@ -6756,7 +7428,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Initial # Tags
- Initial # Tags
+ საწყისი #ჭდეები
@@ -6769,7 +7441,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Job Preferences
- Job Preferences
+ ამოცანების მორგება
@@ -6826,13 +7498,13 @@ If it is necessary to set the FinalDepth manually please select a different oper
Default Curve Accuracy
- Default Curve Accuracy
+ რკალის ნაგულისხმევი სიზუსტე
Post Processor
- Post Processor
+ პოსტპროცესორი
@@ -6842,7 +7514,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Default Path
- Default Path
+ ნაგულისხმევი ტრაექტორია
@@ -6867,12 +7539,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Open File Dialog on conflict
- Open File Dialog on conflict
+ კონფლიქტისას ფაილის გახსნის ფანჯრის ჩვენება
Overwrite existing file
- Overwrite existing file
+ არსებულ ფაილზე ზემოდან გადაწერა
@@ -6882,7 +7554,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Post Processors Selection
- Post Processors Selection
+ პოსტპროცესორის არჩევა
@@ -6892,7 +7564,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Default Post Processor
- Default Post Processor
+ ნაგულისხმევი პოსტპროცესორი
@@ -6902,17 +7574,17 @@ If it is necessary to set the FinalDepth manually please select a different oper
DefaultPostProcessor
- DefaultPostProcessor
+ ნაგულისხმევი პოსტპროცესორი
Mod/Path
- Mod/Path
+ Mod/ტრაექტორია
Default Arguments
- Default Arguments
+ ნაგულისხმევი არგუმენტები
@@ -7023,7 +7695,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Store Absolute Paths
- Store Absolute Paths
+ სრული ტრაექტორიების შენახვა
@@ -7045,7 +7717,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Default Path colors
- Default Path colors
+ ნაგულისხმევი ტრაექტორიის ფერები
@@ -7070,7 +7742,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Rapid path color
- Rapid path color
+ სწრაფი ტრაექტორიის ფერი
@@ -7085,17 +7757,17 @@ If it is necessary to set the FinalDepth manually please select a different oper
Default pathline width
- Default pathline width
+ ტრაექტორიის ხაზის ნაგულისხმევი სიგანე
Default normal path color
- Default normal path color
+ ტრაექტორიის ნორმალური ნაგულისხმევი ფერი
Probe Path color
- Probe Path color
+ ზონდის ტრაექტორიის ფერი
@@ -7105,7 +7777,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path Highlight Color
- Path Highlight Color
+ ტრაექტორიის გამოკვეთის ფერი
@@ -7125,7 +7797,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path Selection Style
- Path Selection Style
+ ტრაექტორიის მონიშვნის სტილი
@@ -7140,7 +7812,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Bounding Box
- Bounding Box
+ შემომსაზღვრელი ჩარჩო
@@ -7210,7 +7882,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Suppress selection mode warning
- Suppress selection mode warning
+ არჩევის რეჟიმის გაფრთხილების იგნორი
@@ -7235,17 +7907,17 @@ p, li { white-space: pre-wrap; }
Enable OCL dependent features
- Enable OCL dependent features
+ OCL-ზე დამოკიდებული თვისებების ჩართვა
Suppress warning if openCAMlib cannot be found
- Suppress warning if openCAMlib cannot be found
+ OpenCAMlib-ის პოვნის შეცდომის იგნორი
Suppress openCAMlib warning
- Suppress openCAMlib warning
+ OpenCAMlib-ის გაფრთხილების იგნორი
@@ -7253,7 +7925,7 @@ p, li { white-space: pre-wrap; }
Compound paths
- Compound paths
+ შედგენილი ტრაექტორიები
@@ -7338,7 +8010,7 @@ p, li { white-space: pre-wrap; }
Dressup
- Dressup
+ შეფუთვა
@@ -7443,12 +8115,12 @@ p, li { white-space: pre-wrap; }
Filter Angle
- Filter Angle
+ კუთხის ფილტრი
Pivot Height
- Pivot Height
+ ღერძის სიმაღლე
@@ -7458,7 +8130,7 @@ p, li { white-space: pre-wrap; }
Offset Distance
- Offset Distance
+ წანაცვლების მანძილი
@@ -7493,7 +8165,7 @@ p, li { white-space: pre-wrap; }
Style In:
- Style In:
+ შეყვანის სტილი:
@@ -7571,7 +8243,7 @@ p, li { white-space: pre-wrap; }
Use Machine CRC
- Use Machine CRC
+ მანქანური CRC-ის გამოყენება
@@ -7662,12 +8334,12 @@ p, li { white-space: pre-wrap; }
Drag to reorder, then update.
- Drag to reorder, then update.
+ ჯერ გადასალაგებლად, შემდეგ განსაახლებლად, გადაათრიეთ.
Add item selected in window.
- Add item selected in window.
+ მონიშნული ელემენტის ფანჯარაში ჩამატება.
@@ -7747,12 +8419,12 @@ p, li { white-space: pre-wrap; }
ToolController
- ToolController
+ ხელსაწყოს კონტროლერი
Coolant Mode
- Coolant Mode
+ გამაგრილებლის რეჟიმი
@@ -7767,17 +8439,17 @@ p, li { white-space: pre-wrap; }
OCL Dropcutter
- OCL Dropcutter
+ OCL ფრეზირება
OCL Waterline
- OCL Waterline
+ OCL წყალხაზი
Z Depth Correction
- Z Depth Correction
+ Z სიღრმის ჩასწორება
@@ -7805,12 +8477,12 @@ p, li { white-space: pre-wrap; }
Path Simulator
- Path Simulator
+ ტრაექტორიის სიმულატორი
Stop running simulation
- Stop running simulation
+ სიმულაციის გაშვების შეჩერება
@@ -7820,7 +8492,7 @@ p, li { white-space: pre-wrap; }
Activate / resume simulation
- Activate / resume simulation
+ სიმულაციის დაწყება / გაგრძელება
@@ -7840,7 +8512,7 @@ p, li { white-space: pre-wrap; }
Single step simulation
- Single step simulation
+ ერთნაბიჯიანი სიმულაცია
@@ -7850,7 +8522,7 @@ p, li { white-space: pre-wrap; }
Run simulation till end without animation
- Run simulation till end without animation
+ სიმულაციის ანიმაციის გარეშე გაშვება
@@ -8046,12 +8718,12 @@ p, li { white-space: pre-wrap; }
Create Tool Controllers for the selected tools
- Create Tool Controllers for the selected tools
+ მონიშნული ხელსაწყოების კონტროლერების შექმნა
Create Tool Controller(s)
- Create Tool Controller(s)
+ ხელსაწყოს კონტროლერ(ებ)-ის შექმნა
@@ -8059,7 +8731,7 @@ p, li { white-space: pre-wrap; }
Tool Selector
- Tool Selector
+ ხელსაწყოს არჩევა
@@ -8124,7 +8796,7 @@ p, li { white-space: pre-wrap; }
Template Export
- Template Export
+ შაბლონის გატანა
@@ -8166,7 +8838,7 @@ p, li { white-space: pre-wrap; }
Work Coordinate Systems
- Work Coordinate Systems
+ სამუშაო კოორდინატების სისტემები
@@ -8296,7 +8968,7 @@ p, li { white-space: pre-wrap; }
Split Output
- Split Output
+ გამოტანის გაყოფა
@@ -8331,7 +9003,7 @@ p, li { white-space: pre-wrap; }
Use Existing Solid
- Use Existing Solid
+ არსებული მყარი სხეულის გამოყენება
@@ -8397,7 +9069,7 @@ p, li { white-space: pre-wrap; }
Move to Origin
- Move to Origin
+ წყაროსთან გადატანა
@@ -8442,12 +9114,12 @@ p, li { white-space: pre-wrap; }
Move - XY
- Move - XY
+ გადატანა - XY
Rotate - XY
- Rotate - XY
+ შებრუნება XY
@@ -8548,7 +9220,7 @@ p, li { white-space: pre-wrap; }
Coolant Mode
- Coolant Mode
+ გამაგრილებლის რეჟიმი
@@ -8630,7 +9302,7 @@ p, li { white-space: pre-wrap; }
Op Defaults
- Op Defaults
+ ოპ. მნიშვნელობები
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_lt.qm b/src/Mod/Path/Gui/Resources/translations/Path_lt.qm
index e804d30dc8..6e5863dbc3 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_lt.qm and b/src/Mod/Path/Gui/Resources/translations/Path_lt.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_lt.ts b/src/Mod/Path/Gui/Resources/translations/Path_lt.ts
index 5c434924f9..9597465d3c 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_lt.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_lt.ts
@@ -213,6 +213,16 @@
The Z height of the hop
The Z height of the hop
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
Stop processing
@@ -243,6 +253,111 @@
The output location for the probe data to be written
The output location for the probe data to be written
+
+
+ The base geometry for this operation
+ The base geometry for this operation
+
+
+
+ Holds the calculated value for the StartDepth
+ Holds the calculated value for the StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Holds the calculated value for the FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ Make False, to prevent operation from generating code
+ Nustatyti reikšmę į „Netiesa“, norint išvengti kodo kūrimo veiksmo
+
+
+
+ An optional comment for this Operation
+ An optional comment for this Operation
+
+
+
+ User Assigned Label
+ User Assigned Label
+
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
+
+
+ Base locations for this operation
+ Base locations for this operation
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Starting Depth of Tool- first cut depth in Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Final Depth of Tool- lowest value in Z
+
+
+
+ Incremental Step Down of Tool
+ Incremental Step Down of Tool
+
+
+
+ Maximum material removed on final pass.
+ Maximum material removed on final pass.
+
+
+
+ Rapid Safety Height between locations.
+ Rapid Safety Height between locations.
+
+
+
+ The start point of this path
+ The start point of this path
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
Fixture Offset Number
-
-
- Make False, to prevent operation from generating code
- Nustatyti reikšmę į „Netiesa“, norint išvengti kodo kūrimo veiksmo
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
The gcode to be inserted
+
+
+ Angle of ramp.
+ Angle of ramp.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Custom feed rate
+
+
+ Width of tags.
+ Width of tags.
+
+
+
+ Height of tags.
+ Height of tags.
+
+
+
+ Angle of tag plunge and ascent.
+ Angle of tag plunge and ascent.
+
+
+
+ Radius of the fillet for the tag.
+ Žymės suapvalinimo spindulys.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expression used for StepDown of new operations.
-
-
- Start pocketing at center or boundary
- Start pocketing at center or boundary
-
-
-
- Percent of cutter diameter to step over on each pass
- Percent of cutter diameter to step over on each pass
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Extra offset to apply to the operation. Direction is operation dependent.
+
+
+ Start pocketing at center or boundary
+ Start pocketing at center or boundary
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Percent of cutter diameter to step over on each pass
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Attempts to avoid unnecessary retractions.
+
+
+ The side of path to insert bones
+ The side of path to insert bones
+
+
+
+ The style of bones
+ The style of bones
+
+
+
+ Bones that aren't dressed up
+ Bones that aren't dressed up
+
+
+
+ The algorithm to determine the bone length
+ The algorithm to determine the bone length
+
+
+
+ Dressup length if Incision == custom
+ Dressup length if Incision == custom
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ List of custom property groups
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
The tool used by this controller
+
+
+ List of disabled features
+ List of disabled features
+
+
+
+ The NC output file for this project
+ The NC output file for this project
+
+
+
+ Select the Post Processor
+ Select the Post Processor
+
+
+
+ Last Time the Job was post-processed
+ Last Time the Job was post-processed
+
+
+
+ An optional description for this job
+ An optional description for this job
+
+
+
+ Job Cycle Time Estimation
+ Job Cycle Time Estimation
+
+
+
+ Solid object to be used as stock.
+ Solid object to be used as stock.
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ SetupSheet holding the settings for this job
+ SetupSheet holding the settings for this job
+
+
+
+ The base objects for all operations
+ The base objects for all operations
+
+
+
+ Collection of all tool controllers for the job
+ Collection of all tool controllers for the job
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
Didn't find job %s
+
+
+ Illegal arc: Start and end radii not equal
+ Illegal arc: Start and end radii not equal
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
Selected tool is not a drill
-
-
- Illegal arc: Start and end radii not equal
- Illegal arc: Start and end radii not equal
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
CCW
-
-
- List of disabled features
- List of disabled features
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utils
+
+
+ List of disabled features
+ List of disabled features
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Creates a Deburr Path along Edges or around Faces
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Edit HoldingTags Dress-up
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Unsupported stock object %s
-
-
-
- Unsupported stock type %s (%d)
- Unsupported stock type %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
Stock not a cylinder!
+
+
+ Unsupported stock object %s
+ Unsupported stock object %s
+
+
+
+ Unsupported stock type %s (%d)
+ Unsupported stock type %s (%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Solid object to be used as stock.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Split output into multiple gcode files
-
-
-
- If multiple WCS, order the output this way
- If multiple WCS, order the output this way
-
-
-
- The Work Coordinate Systems for the Job
- The Work Coordinate Systems for the Job
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Collection of all tool controllers for the job
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- The base geometry for this operation
-
-
-
- Holds the calculated value for the StartDepth
- Holds the calculated value for the StartDepth
-
-
-
- Holds the calculated value for the FinalDepth
- Holds the calculated value for the FinalDepth
-
-
-
- Holds the diameter of the tool
- Holds the diameter of the tool
-
-
-
- Holds the max Z value of Stock
- Holds the max Z value of Stock
-
-
-
- Holds the min Z value of Stock
- Holds the min Z value of Stock
-
-
-
- Make False, to prevent operation from generating code
- Nustatyti reikšmę į „Netiesa“, norint išvengti kodo kūrimo veiksmo
-
-
-
- An optional comment for this Operation
- An optional comment for this Operation
-
-
-
- User Assigned Label
- User Assigned Label
-
-
-
- Operations Cycle Time Estimation
- Operations Cycle Time Estimation
-
-
-
- Base locations for this operation
- Base locations for this operation
-
-
-
- Coolant mode for this operation
- Coolant mode for this operation
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Starting Depth of Tool- first cut depth in Z
-
-
-
- Final Depth of Tool- lowest value in Z
- Final Depth of Tool- lowest value in Z
-
-
-
- Starting Depth internal use only for derived values
- Starting Depth internal use only for derived values
-
-
-
- Incremental Step Down of Tool
- Incremental Step Down of Tool
-
-
-
- Maximum material removed on final pass.
- Maximum material removed on final pass.
-
-
-
- The height needed to clear clamps and obstructions
- The height needed to clear clamps and obstructions
-
-
-
- Rapid Safety Height between locations.
- Rapid Safety Height between locations.
-
-
-
- The start point of this path
- The start point of this path
-
-
-
- Make True, if specifying a Start Point
- Nustatyti reikšmę į „Tiesa“, jei nurodomas pradinis taškas
-
-
-
- Lower limit of the turning diameter
- Lower limit of the turning diameter
-
-
-
- Upper limit of the turning diameter.
- Upper limit of the turning diameter.
-
-
-
- Coolant option for this operation
- Coolant option for this operation
-
Edit
@@ -1668,11 +1785,131 @@ If it is necessary to set the FinalDepth manually please select a different oper
Pick Start Point
Pick Start Point
+
+
+ Make False, to prevent operation from generating code
+ Nustatyti reikšmę į „Netiesa“, norint išvengti kodo kūrimo veiksmo
+
+
+
+ The base geometry for this operation
+ The base geometry for this operation
+
+
+
+ Holds the calculated value for the StartDepth
+ Holds the calculated value for the StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Holds the calculated value for the FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ An optional comment for this Operation
+ An optional comment for this Operation
+
+
+
+ User Assigned Label
+ User Assigned Label
+
+
+
+ Base locations for this operation
+ Base locations for this operation
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Starting Depth of Tool- first cut depth in Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Final Depth of Tool- lowest value in Z
+
+
+
+ Starting Depth internal use only for derived values
+ Starting Depth internal use only for derived values
+
+
+
+ Incremental Step Down of Tool
+ Incremental Step Down of Tool
+
+
+
+ Maximum material removed on final pass.
+ Maximum material removed on final pass.
+
+
+
+ The height needed to clear clamps and obstructions
+ The height needed to clear clamps and obstructions
+
+
+
+ Rapid Safety Height between locations.
+ Rapid Safety Height between locations.
+
+
+
+ The start point of this path
+ The start point of this path
+
+
+
+ Make True, if specifying a Start Point
+ Nustatyti reikšmę į „Tiesa“, jei nurodomas pradinis taškas
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Job Cycle Time Estimation
Job Cycle Time Estimation
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
PathPlane
@@ -1735,29 +1972,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Final depth set below ZMin of face(s) selected.
-
- PathPocketShape
-
-
- Default length of extensions.
- Default length of extensions.
-
-
-
- List of features to extend.
- List of features to extend.
-
-
-
- When enabled connected extension edges are combined to wires.
- When enabled connected extension edges are combined to wires.
-
-
-
- Uses the outline of the base geometry.
- Uses the outline of the base geometry.
-
-
PathProfile
@@ -1831,34 +2045,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
For open edges, verify Final Depth for this operation.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Edit PropertyBag
-
-
-
- Create PropertyBag
- Create PropertyBag
-
-
-
- PropertyBag
- PropertyBag
-
-
-
- Creates an object which can be used to store reference properties.
- Creates an object which can be used to store reference properties.
-
-
-
- List of custom property groups
- List of custom property groups
-
-
PathSlot
@@ -2885,59 +3071,69 @@ If it is necessary to set the FinalDepth manually please select a different oper
Angle of ramp.
Angle of ramp.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Sraigtas
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Pasirinktinė
+
RampEntry Dress-up
RampEntry Dress-up
+
+
+ Please select one path object
+ Please select one path object
+
+
+
+ The selected object is not a path
+ The selected object is not a path
+
+
+
+ Please select a Profile object
+ Please select a Profile object
+
Path_DressupTag
-
-
- The base path to modify
- The base path to modify
-
-
-
- Width of tags.
- Width of tags.
-
-
-
- Height of tags.
- Height of tags.
-
-
-
- Angle of tag plunge and ascent.
- Angle of tag plunge and ascent.
-
-
-
- Radius of the fillet for the tag.
- Žymės suapvalinimo spindulys.
-
-
-
- Locations of inserted holding tags
- Locations of inserted holding tags
-
-
-
- IDs of disabled holding tags
- IDs of disabled holding tags
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Factor determining the # of segments used to approximate rounded tags.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Cannot insert holding tags for this path - please select a Profile path
-
The selected object is not a path
@@ -2983,6 +3179,46 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Tag Dress-up
Create Tag Dress-up
+
+
+ The base path to modify
+ The base path to modify
+
+
+
+ Width of tags.
+ Width of tags.
+
+
+
+ Height of tags.
+ Height of tags.
+
+
+
+ Angle of tag plunge and ascent.
+ Angle of tag plunge and ascent.
+
+
+
+ Radius of the fillet for the tag.
+ Žymės suapvalinimo spindulys.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Factor determining the # of segments used to approximate rounded tags.
+
No Base object found.
@@ -3003,6 +3239,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Base Path is empty.
Base Path is empty.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Cannot insert holding tags for this path - please select a Profile path
+
Path_DressupZCorrect
@@ -3096,6 +3337,19 @@ If it is necessary to set the FinalDepth manually please select a different oper
Engraving Operations
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Export Template
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Exports Path Job as a template to be used for other jobs
+
+
Path_Helix
@@ -3192,6 +3446,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
Exports Path Job as a template to be used for other jobs
Exports Path Job as a template to be used for other jobs
+
+
+ Edit
+ Taisyti
+
+
+
+ Stock not a cylinder!
+ Stock not a cylinder!
+
Edit Job
@@ -3212,6 +3476,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
All Files (*.*)
All Files (*.*)
+
+
+ Unsupported stock object %s
+ Unsupported stock object %s
+
+
+
+ Unsupported stock type %s (%d)
+ Unsupported stock type %s (%d)
+
Model Selection
@@ -3222,6 +3496,71 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Job
Create Job
+
+
+ Fixture
+ Fixture
+
+
+
+ Tool
+ Įrankis
+
+
+
+ Operation
+ Operation
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Pilnaviduriai kūnai
+
+
+
+ Jobs
+ Jobs
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Box: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Cylinder: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Unsupported stock type
+
Path_MillFace
@@ -3244,6 +3583,24 @@ If it is necessary to set the FinalDepth manually please select a different oper
Toggle the Active State of the Operation
+
+ Path_Operation
+
+
+ None
+ Joks
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3453,6 +3810,14 @@ If it is necessary to set the FinalDepth manually please select a different oper
Profile entire model, selected face(s) or selected edge(s)
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
@@ -3763,6 +4128,136 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Pasirinktinė
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Atkarpa
+
+
+
+ Offset
+ Offset
+
+
+
+ Spiral
+ Įvija
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ None
+ Joks
+
+
+
+ Only
+ Only
+
+
+
+ First
+ First
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Plokščias
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -4015,6 +4510,183 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create a Waterline Operation from a model
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ This operation requires OpenCamLib to be installed.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Pasirinktinė
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Atkarpa
+
+
+
+ Offset
+ Offset
+
+
+
+ Spiral
+ Įvija
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ None
+ Joks
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Edit HoldingTags Dress-up
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ When enabled connected extension edges are combined to wires.
+
+
+
+ Uses the outline of the base geometry.
+ Uses the outline of the base geometry.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Edit PropertyBag
+
+
+
+ Create PropertyBag
+ Create PropertyBag
+
+
+
+ PropertyBag
+ PropertyBag
+
+
+
+ Creates an object which can be used to store reference properties.
+ Creates an object which can be used to store reference properties.
+
+
+
+ List of custom property groups
+ List of custom property groups
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_nl.qm b/src/Mod/Path/Gui/Resources/translations/Path_nl.qm
index 98711e5d3d..f79e8f66e1 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_nl.qm and b/src/Mod/Path/Gui/Resources/translations/Path_nl.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_nl.ts b/src/Mod/Path/Gui/Resources/translations/Path_nl.ts
index f1920263f0..2b2b1aa322 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_nl.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_nl.ts
@@ -213,6 +213,16 @@
The Z height of the hop
De Z-hoogte van de sprong
+
+
+ Default length of extensions.
+ Standaardlengte van extensies.
+
+
+
+ List of features to extend.
+ Lijst met kenmerken om uit te breiden.
+
Stop processing
@@ -243,6 +253,111 @@
The output location for the probe data to be written
De uitgangslocatie voor de te schrijven tastgegevens
+
+
+ The base geometry for this operation
+ De basisgeometrie voor deze bewerking
+
+
+
+ Holds the calculated value for the StartDepth
+ Behoudt de berekende waarde voor StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Behoudt de berekende waarde voor FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Houdt de diameter van het gereedschap
+
+
+
+ Holds the max Z value of Stock
+ Behoudt de maximale Z-waarde van de stock
+
+
+
+ Holds the min Z value of Stock
+ Behoudt de minimale Z-waarde van de stock
+
+
+
+ Make False, to prevent operation from generating code
+ Maak waarde 'False' om te voorkomen dat de generieke code wordt uitgevoerd
+
+
+
+ An optional comment for this Operation
+ Een optionele reactie voor deze bewerking
+
+
+
+ User Assigned Label
+ Door de gebruiker toegewezen label
+
+
+
+ Operations Cycle Time Estimation
+ Schatting van de operatiecyclustijd
+
+
+
+ Base locations for this operation
+ Basislocaties voor deze bewerking
+
+
+
+ Coolant mode for this operation
+ Koelmodus voor deze bewerking
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Startdiepte van het gereedschap- eerste snijdiepte in Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Einddiepte van het gereedschap- laagste waarde in Z
+
+
+
+ Incremental Step Down of Tool
+ Incrementele afname van het gereedschap
+
+
+
+ Maximum material removed on final pass.
+ Maximale hoeveelheid verwijderd materiaal bij de laatste passage.
+
+
+
+ Rapid Safety Height between locations.
+ Snelle veiligheidshoogte tussen locaties.
+
+
+
+ The start point of this path
+ Het beginpunt van dit pad
+
+
+
+ Lower limit of the turning diameter
+ Onder limiet van de draai diameter
+
+
+
+ Upper limit of the turning diameter.
+ Bovenlimiet van de draai diameter.
+
+
+
+ Coolant option for this operation
+ Koeloptie voor deze bewerking
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
Bevestingverschuivingsnummer
-
-
- Make False, to prevent operation from generating code
- Maak waarde 'False' om te voorkomen dat de generieke code wordt uitgevoerd
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
De in te voegen gcode
+
+
+ Angle of ramp.
+ Hoek van de glooiing.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Aangepaste invoersnelheid
+
+
+ Width of tags.
+ Breedte van de tags.
+
+
+
+ Height of tags.
+ Hoogte van de tags.
+
+
+
+ Angle of tag plunge and ascent.
+ Duik- en klimhoek van de tag.
+
+
+
+ Radius of the fillet for the tag.
+ Straal van de afronding voor de tag.
+
+
+
+ Locations of inserted holding tags
+ Locaties van geïnstalleerde bevestigingslippen
+
+
+
+ IDs of disabled holding tags
+ ID's van uitgeschakelde bevestigingslippen
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expressie ingesteld voor de StepDown van nieuwe operaties.
-
-
- Start pocketing at center or boundary
- Begin met het uithollen in het midden of op de grens
-
-
-
- Percent of cutter diameter to step over on each pass
- Percentage van de diameter van de frees om over te stappen bij elke passage
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Extra verschuiving om toe te passen op de bewerking. Richting is afhankelijk van bewerking.
+
+
+ Start pocketing at center or boundary
+ Begin met het uithollen in het midden of op de grens
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Percentage van de diameter van de frees om over te stappen bij elke passage
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Pogingen om onnodige intrekkingen te vermijden.
+
+
+ The side of path to insert bones
+ De kant van het pad om botten in te brengen
+
+
+
+ The style of bones
+ De stijl van de botten
+
+
+
+ Bones that aren't dressed up
+ Botten die niet verkleed zijn
+
+
+
+ The algorithm to determine the bone length
+ Het algoritme om de botlengte te bepalen
+
+
+
+ Dressup length if Incision == custom
+ Verkleedlengte als insnijding == aangepast
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ Lijst van aangepaste eigenschapsgroepen
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
Het gereedschap dat door deze regelaar wordt gebruikt
+
+
+ List of disabled features
+ Lijst met uitgeschakelde kenmerken
+
+
+
+ The NC output file for this project
+ Het NC-uitvoerbestand voor dit project
+
+
+
+ Select the Post Processor
+ Selecteer de nabewerker
+
+
+
+ Last Time the Job was post-processed
+ Laatste keer dat de klus na-bewerkt
+
+
+
+ An optional description for this job
+ Een optionele omschrijving voor deze taak
+
+
+
+ Job Cycle Time Estimation
+ Schatting van de Taak CyclusTijd
+
+
+
+ Solid object to be used as stock.
+ Solide object om te gebruiken als stock.
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ Splits uitvoer in meerdere gcode-bestanden
+
+
+
+ If multiple WCS, order the output this way
+ Bij meerdere WCS, sorteer de output op deze manier
+
+
+
+ The Work Coordinate Systems for the Job
+ De werkcoördinatiesystemen voor de taak
+
+
+
+ SetupSheet holding the settings for this job
+ SetupSheet met de instellingen voor deze taak
+
+
+
+ The base objects for all operations
+ De basisobjecten voor alle bewerkingen
+
+
+
+ Collection of all tool controllers for the job
+ Verzameling van alle gereedschap opties voor de taak
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
Taak %s niet gevonden
+
+
+ Illegal arc: Start and end radii not equal
+ Illegale boog: start- en eindradii niet gelijk aan elkaar
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
Selected tool is not a drill
-
-
- Illegal arc: Start and end radii not equal
- Illegale boog: start- en eindradii niet gelijk aan elkaar
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
Linksom
-
-
- List of disabled features
- Lijst met uitgeschakelde kenmerken
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Hulpmiddelen
+
+
+ List of disabled features
+ Lijst met uitgeschakelde kenmerken
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Maakt een afbrampad aan langs de randen of rond de vlakken
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Bewerk verkleding van bevestigingslippen
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Stockobject %s niet ondersteund
-
-
-
- Unsupported stock type %s (%d)
- Stocktype %s (%d) niet ondersteund
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
Stock is geen cilinder!
+
+
+ Unsupported stock object %s
+ Stockobject %s niet ondersteund
+
+
+
+ Unsupported stock type %s (%d)
+ Stocktype %s (%d) niet ondersteund
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Solide object om te gebruiken als stock.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Splits uitvoer in meerdere gcode-bestanden
-
-
-
- If multiple WCS, order the output this way
- Bij meerdere WCS, sorteer de output op deze manier
-
-
-
- The Work Coordinate Systems for the Job
- De werkcoördinatiesystemen voor de taak
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Verzameling van alle gereedschap opties voor de taak
+
+
+ The Work Coordinate Systems for the Job
+ De werkcoördinatiesystemen voor de taak
+
+
+
+ If multiple WCS, order the output this way
+ Bij meerdere WCS, sorteer de output op deze manier
+
+
+
+ Split output into multiple gcode files
+ Splits uitvoer in meerdere gcode-bestanden
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- De basisgeometrie voor deze bewerking
-
-
-
- Holds the calculated value for the StartDepth
- Behoudt de berekende waarde voor StartDepth
-
-
-
- Holds the calculated value for the FinalDepth
- Behoudt de berekende waarde voor FinalDepth
-
-
-
- Holds the diameter of the tool
- Houdt de diameter van het gereedschap
-
-
-
- Holds the max Z value of Stock
- Behoudt de maximale Z-waarde van de stock
-
-
-
- Holds the min Z value of Stock
- Behoudt de minimale Z-waarde van de stock
-
-
-
- Make False, to prevent operation from generating code
- Maak waarde 'False' om te voorkomen dat de generieke code wordt uitgevoerd
-
-
-
- An optional comment for this Operation
- Een optionele reactie voor deze bewerking
-
-
-
- User Assigned Label
- Door de gebruiker toegewezen label
-
-
-
- Operations Cycle Time Estimation
- Schatting van de operatiecyclustijd
-
-
-
- Base locations for this operation
- Basislocaties voor deze bewerking
-
-
-
- Coolant mode for this operation
- Koelmodus voor deze bewerking
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Startdiepte van het gereedschap- eerste snijdiepte in Z
-
-
-
- Final Depth of Tool- lowest value in Z
- Einddiepte van het gereedschap- laagste waarde in Z
-
-
-
- Starting Depth internal use only for derived values
- Startdiepte intern gebruik alleen voor afgeleide waarden
-
-
-
- Incremental Step Down of Tool
- Incrementele afname van het gereedschap
-
-
-
- Maximum material removed on final pass.
- Maximale hoeveelheid verwijderd materiaal bij de laatste passage.
-
-
-
- The height needed to clear clamps and obstructions
- De hoogte die nodig is om klemmen en obstructies te ontruimen
-
-
-
- Rapid Safety Height between locations.
- Snelle veiligheidshoogte tussen locaties.
-
-
-
- The start point of this path
- Het beginpunt van dit pad
-
-
-
- Make True, if specifying a Start Point
- Maak Waar, indien een startpunt wordt gespecificeerd
-
-
-
- Lower limit of the turning diameter
- Onder limiet van de draai diameter
-
-
-
- Upper limit of the turning diameter.
- Bovenlimiet van de draai diameter.
-
-
-
- Coolant option for this operation
- Koeloptie voor deze bewerking
-
Edit
@@ -1668,11 +1785,131 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew
Pick Start Point
Kies het startpunt
+
+
+ Make False, to prevent operation from generating code
+ Maak waarde 'False' om te voorkomen dat de generieke code wordt uitgevoerd
+
+
+
+ The base geometry for this operation
+ De basisgeometrie voor deze bewerking
+
+
+
+ Holds the calculated value for the StartDepth
+ Behoudt de berekende waarde voor StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Behoudt de berekende waarde voor FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Houdt de diameter van het gereedschap
+
+
+
+ Holds the max Z value of Stock
+ Behoudt de maximale Z-waarde van de stock
+
+
+
+ Holds the min Z value of Stock
+ Behoudt de minimale Z-waarde van de stock
+
+
+
+ An optional comment for this Operation
+ Een optionele reactie voor deze bewerking
+
+
+
+ User Assigned Label
+ Door de gebruiker toegewezen label
+
+
+
+ Base locations for this operation
+ Basislocaties voor deze bewerking
+
+
+
+ Coolant mode for this operation
+ Koelmodus voor deze bewerking
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Startdiepte van het gereedschap- eerste snijdiepte in Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Einddiepte van het gereedschap- laagste waarde in Z
+
+
+
+ Starting Depth internal use only for derived values
+ Startdiepte intern gebruik alleen voor afgeleide waarden
+
+
+
+ Incremental Step Down of Tool
+ Incrementele afname van het gereedschap
+
+
+
+ Maximum material removed on final pass.
+ Maximale hoeveelheid verwijderd materiaal bij de laatste passage.
+
+
+
+ The height needed to clear clamps and obstructions
+ De hoogte die nodig is om klemmen en obstructies te ontruimen
+
+
+
+ Rapid Safety Height between locations.
+ Snelle veiligheidshoogte tussen locaties.
+
+
+
+ The start point of this path
+ Het beginpunt van dit pad
+
+
+
+ Make True, if specifying a Start Point
+ Maak Waar, indien een startpunt wordt gespecificeerd
+
+
+
+ Lower limit of the turning diameter
+ Onder limiet van de draai diameter
+
+
+
+ Upper limit of the turning diameter.
+ Bovenlimiet van de draai diameter.
+
+
+
+ Coolant option for this operation
+ Koeloptie voor deze bewerking
+
Job Cycle Time Estimation
Schatting van de Taak CyclusTijd
+
+
+ Operations Cycle Time Estimation
+ Schatting van de operatiecyclustijd
+
PathPlane
@@ -1735,29 +1972,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew
Definitieve diepte ingesteld onder ZMin of vlak(ken) geselecteerd.
-
- PathPocketShape
-
-
- Default length of extensions.
- Standaardlengte van extensies.
-
-
-
- List of features to extend.
- Lijst met kenmerken om uit te breiden.
-
-
-
- When enabled connected extension edges are combined to wires.
- Indien ingeschakeld worden aangesloten extensieranden gecombineerd met draden.
-
-
-
- Uses the outline of the base geometry.
- Maakt gebruik van de omtrek van de basisgeometrie.
-
-
PathProfile
@@ -1831,34 +2045,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew
Voor de geopende randen, controleer de eind diepte voor deze bewerking.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Bewerk EigenschapEmmer
-
-
-
- Create PropertyBag
- EigenschapEmmer aanmaken
-
-
-
- PropertyBag
- PropertyBag
-
-
-
- Creates an object which can be used to store reference properties.
- Maakt een object dat kan worden gebruikt om referentie-eigenschappen op te slaan.
-
-
-
- List of custom property groups
- Lijst van aangepaste eigenschapsgroepen
-
-
PathSlot
@@ -2885,59 +3071,69 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew
Angle of ramp.
Hoek van de glooiing.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Schroef
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Eigen
+
RampEntry Dress-up
Verkleding van de inloophelling
+
+
+ Please select one path object
+ Gelieve een padobject te selecteren
+
+
+
+ The selected object is not a path
+ Het geselecteerde object is geen pad
+
+
+
+ Please select a Profile object
+ Gelieve een profielobject te selecteren
+
Path_DressupTag
-
-
- The base path to modify
- Het te wijzigen basistraject
-
-
-
- Width of tags.
- Breedte van de tags.
-
-
-
- Height of tags.
- Hoogte van de tags.
-
-
-
- Angle of tag plunge and ascent.
- Duik- en klimhoek van de tag.
-
-
-
- Radius of the fillet for the tag.
- Straal van de afronding voor de tag.
-
-
-
- Locations of inserted holding tags
- Locaties van geïnstalleerde bevestigingslippen
-
-
-
- IDs of disabled holding tags
- ID's van uitgeschakelde bevestigingslippen
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Factor die de # segmenten bepaalt die gebruikt worden om afgeronde tags te schatten.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Kan geen bevestigingslippen invoegen voor dit pad - gelieve een profielpad te selecteren
-
The selected object is not a path
@@ -2983,6 +3179,46 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew
Create Tag Dress-up
Tagverkleding aanmaken
+
+
+ The base path to modify
+ Het te wijzigen basistraject
+
+
+
+ Width of tags.
+ Breedte van de tags.
+
+
+
+ Height of tags.
+ Hoogte van de tags.
+
+
+
+ Angle of tag plunge and ascent.
+ Duik- en klimhoek van de tag.
+
+
+
+ Radius of the fillet for the tag.
+ Straal van de afronding voor de tag.
+
+
+
+ Locations of inserted holding tags
+ Locaties van geïnstalleerde bevestigingslippen
+
+
+
+ IDs of disabled holding tags
+ ID's van uitgeschakelde bevestigingslippen
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Factor die de # segmenten bepaalt die gebruikt worden om afgeronde tags te schatten.
+
No Base object found.
@@ -3003,6 +3239,11 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew
Base Path is empty.
Basistraject is leeg.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Kan geen bevestigingslippen invoegen voor dit pad - gelieve een profielpad te selecteren
+
Path_DressupZCorrect
@@ -3096,6 +3337,19 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew
Graveer operaties
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Sjabloon exporteren
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Exporteert padtaak als sjabloon voor andere taken
+
+
Path_Helix
@@ -3192,6 +3446,16 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew
Exports Path Job as a template to be used for other jobs
Exporteert padtaak als sjabloon voor andere taken
+
+
+ Edit
+ Bewerken
+
+
+
+ Stock not a cylinder!
+ Stock is geen cilinder!
+
Edit Job
@@ -3212,6 +3476,16 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew
All Files (*.*)
Alle bestanden (*.*)
+
+
+ Unsupported stock object %s
+ Stockobject %s niet ondersteund
+
+
+
+ Unsupported stock type %s (%d)
+ Stocktype %s (%d) niet ondersteund
+
Model Selection
@@ -3222,6 +3496,71 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew
Create Job
Taak aanmaken
+
+
+ Fixture
+ Bevestiging
+
+
+
+ Tool
+ Gereedschap
+
+
+
+ Operation
+ Bewerking
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Volumemodellen
+
+
+
+ Jobs
+ Taken
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Basis -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Doos: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Cilinder: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Niet-ondersteund stocktype
+
Path_MillFace
@@ -3244,6 +3583,24 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew
Schakel de actieve status van de operatie in
+
+ Path_Operation
+
+
+ None
+ Geen
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3453,6 +3810,14 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew
Profiel hele model, geselecteerde vlakken(en) of geselecteerde rand(en)
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
@@ -3763,6 +4128,136 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Eigen
+
+
+
+ Conventional
+ Conventioneel
+
+
+
+ Climb
+ Klimmen
+
+
+
+ Circular
+ Rond
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Lijn
+
+
+
+ Offset
+ Verschuiving
+
+
+
+ Spiral
+ Spiraal
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Meerdere-passages
+
+
+
+ None
+ Geen
+
+
+
+ Only
+ Only
+
+
+
+ First
+ Eerste
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Planair
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -4015,6 +4510,183 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew
Maak een waterlijnbewerking aan vanuit een model
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ Voor deze operatie moet OpenCamLib geïnstalleerd zijn.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Eigen
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Rond
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Lijn
+
+
+
+ Offset
+ Verschuiving
+
+
+
+ Spiral
+ Spiraal
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Conventioneel
+
+
+
+ Climb
+ Klimmen
+
+
+
+ None
+ Geen
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Meerdere-passages
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Bewerk verkleding van bevestigingslippen
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Standaardlengte van extensies.
+
+
+
+ List of features to extend.
+ Lijst met kenmerken om uit te breiden.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ Indien ingeschakeld worden aangesloten extensieranden gecombineerd met draden.
+
+
+
+ Uses the outline of the base geometry.
+ Maakt gebruik van de omtrek van de basisgeometrie.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Bewerk EigenschapEmmer
+
+
+
+ Create PropertyBag
+ EigenschapEmmer aanmaken
+
+
+
+ PropertyBag
+ PropertyBag
+
+
+
+ Creates an object which can be used to store reference properties.
+ Maakt een object dat kan worden gebruikt om referentie-eigenschappen op te slaan.
+
+
+
+ List of custom property groups
+ Lijst van aangepaste eigenschapsgroepen
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pl.qm b/src/Mod/Path/Gui/Resources/translations/Path_pl.qm
index f73aad9a9a..3023a9f772 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_pl.qm and b/src/Mod/Path/Gui/Resources/translations/Path_pl.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pl.ts b/src/Mod/Path/Gui/Resources/translations/Path_pl.ts
index 266d5d7632..f4537936ac 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_pl.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_pl.ts
@@ -214,10 +214,20 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
The Z height of the hop
Wysokość skoku w Z
+
+
+ Default length of extensions.
+ Domyślna długość przedłużeń.
+
+
+
+ List of features to extend.
+ Lista elementów do rozszerzenia.
+
Stop processing
- Stop processing
+ Zatrzymaj przetwarzanie
@@ -244,6 +254,111 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
The output location for the probe data to be written
Lokalizacja wyjściowa punktu odniesienia ma być zapisana
+
+
+ The base geometry for this operation
+ Podstawowa geometria dla tej operacji
+
+
+
+ Holds the calculated value for the StartDepth
+ Zatrzymuje obliczoną wartość dla StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Zatrzymuje obliczoną wartość dla FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Utrzymuje średnicę narzędzia
+
+
+
+ Holds the max Z value of Stock
+ Przechowuje maksymalną wartość Z naddatku
+
+
+
+ Holds the min Z value of Stock
+ Utrzymuje minimalną wartość Z naddatku
+
+
+
+ Make False, to prevent operation from generating code
+ Wykonaj jako zaprzeczenie, aby zapobiec operacji przy generowaniu kodu
+
+
+
+ An optional comment for this Operation
+ Opcjonalny komentarz do tej operacji
+
+
+
+ User Assigned Label
+ Etykieta przypisana przez użytkownika
+
+
+
+ Operations Cycle Time Estimation
+ Szacunkowy czas trwania cyklu operacji
+
+
+
+ Base locations for this operation
+ Lokalizacje bazowe dla tej operacji
+
+
+
+ Coolant mode for this operation
+ Tryb chłodzenia dla tej operacji
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Głębokość początkowej obróbki w Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Końcowa głębokość dla narzędzia - najniższa wartość w kierunku Z
+
+
+
+ Incremental Step Down of Tool
+ Przyrostowe obniżanie narzędzia
+
+
+
+ Maximum material removed on final pass.
+ Maksymalny materiał usunięty przy finalnym przebiegu.
+
+
+
+ Rapid Safety Height between locations.
+ Szybki Wzrost Bezpieczeństwa między lokalizacjami.
+
+
+
+ The start point of this path
+ Punkt początkowy tej ścieżki
+
+
+
+ Lower limit of the turning diameter
+ Minimalna średnica toczenia
+
+
+
+ Upper limit of the turning diameter.
+ Maksymalna średnica toczenia.
+
+
+
+ Coolant option for this operation
+ Opcja chłodzenia dla tej operacji
+
Additional base objects to be engraved
@@ -257,7 +372,7 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
Vcarve Tolerance
- Vcarve Tolerance
+ Tolerancja dla wycięcia V
@@ -297,12 +412,12 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
The Style of motion into the Path
- The Style of motion into the Path
+ Styl ruchu w kierunku do ścieżki
The Style of motion out of the Path
- The Style of motion out of the Path
+ Styl ruchu w kierunku od ścieżki
@@ -334,11 +449,6 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
Fixture Offset Number
Zmiana numeru osprzętu
-
-
- Make False, to prevent operation from generating code
- Wykonaj jako zaprzeczenie, aby zapobiec operacji przy generowaniu kodu
-
Shape for bit shape
@@ -369,6 +479,11 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
The gcode to be inserted
G-Code do wstawienia
+
+
+ Angle of ramp.
+ Kąt rampy.
+
Ramping Method
@@ -384,6 +499,36 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
Custom feed rate
Niestandardowy posuw
+
+
+ Width of tags.
+ Szerokość pola mocującego.
+
+
+
+ Height of tags.
+ Wysokość pola mocującego.
+
+
+
+ Angle of tag plunge and ascent.
+ Kąt zanurzenia i wzniesienia pola mocującego.
+
+
+
+ Radius of the fillet for the tag.
+ Promień zaokrąglenia dla pola mocującego.
+
+
+
+ Locations of inserted holding tags
+ Pozycje wstawionych pól mocujących
+
+
+
+ IDs of disabled holding tags
+ ID wyłączonych pól mocujących
+
Incremental Drill depth before retracting to clear chips
@@ -569,16 +714,6 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
Expression used for StepDown of new operations.
Wyrażenie stosowane do zmniejszania głębokości nowych operacji.
-
-
- Start pocketing at center or boundary
- Uruchom obróbke kieszeni w centrum lub obwiedni
-
-
-
- Percent of cutter diameter to step over on each pass
- Procent średnicy freza do przesunięcia przy każdym przejściu
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -589,6 +724,16 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
Extra offset to apply to the operation. Direction is operation dependent.
Dodatkowy offset do operacji. Kierunek jest zależny od operacji.
+
+
+ Start pocketing at center or boundary
+ Uruchom obróbke kieszeni w centrum lub obwiedni
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Procent średnicy freza do przesunięcia przy każdym przejściu
+
Angle of the zigzag pattern
@@ -609,6 +754,31 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
Attempts to avoid unnecessary retractions.
Stara się uniknąć niepotrzebnych wycofań.
+
+
+ The side of path to insert bones
+ Strona ścieżki do zamieszczenia nadcięcia w narożniku
+
+
+
+ The style of bones
+ Styl nadcięcie w narożnikach
+
+
+
+ Bones that aren't dressed up
+ Nieskonfigurowane nadcięcie w narożnikach
+
+
+
+ The algorithm to determine the bone length
+ Algorytm do ustalenia długości nadcięcia
+
+
+
+ Dressup length if Incision == custom
+ Skonfigurowanie długości w przypadku nadcięcia == niestandardowe
+
Add Optional or Mandatory Stop to the program
@@ -679,6 +849,11 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
Seed value for jitter randomness
Wartość ziarna jitteru losowego
+
+
+ List of custom property groups
+ Lista niestandardowych grup właściwości
+
The point file from the surface probing.
@@ -807,7 +982,7 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
Split Arcs into discrete segments
- Split Arcs into discrete segments
+ Podziel łuki na dyskretne segmenty
@@ -849,6 +1024,76 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
The tool used by this controller
Narzędzie wykorzystane przez ten kontroler
+
+
+ List of disabled features
+ Lista wyłączonych funkcji
+
+
+
+ The NC output file for this project
+ NC plik wyjściowy dla tego projektu
+
+
+
+ Select the Post Processor
+ Wybierz Post Procesor
+
+
+
+ Last Time the Job was post-processed
+ Ostatni raz zadanie zostało przetworzone
+
+
+
+ An optional description for this job
+ Opcjonalny opis tego zadania
+
+
+
+ Job Cycle Time Estimation
+ Szacowanie czasu pracy
+
+
+
+ Solid object to be used as stock.
+ Bryła obiektu do wykorzystania jako naddatek.
+
+
+
+ Select the Type of Job
+ Wybierz typ Zadania
+
+
+
+ Split output into multiple gcode files
+ Podziel wynik przetwarzania na wiele plików gcode
+
+
+
+ If multiple WCS, order the output this way
+ Jeśli istnieje wiele układów współrzędnych, uporządkuj wyniki w ten sposób
+
+
+
+ The Work Coordinate Systems for the Job
+ Roboczy układ współrzędnych dla zadania
+
+
+
+ SetupSheet holding the settings for this job
+ SetupSheet wstrzymuje ustawienia dla tego zadania
+
+
+
+ The base objects for all operations
+ Obiekt bazowy dla wszystkich operacji
+
+
+
+ Collection of all tool controllers for the job
+ Zbiór wszystkich kontrolerów narzędzi do pracy
+
Start cutting from the inside or outside
@@ -942,6 +1187,11 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
Didn't find job %s
Nie znaleziono zadania %s
+
+
+ Illegal arc: Start and end radii not equal
+ Niedozwolony łuk: Promienie początkowy i końcowy nie są równe
+
Legacy Tools not supported
@@ -952,11 +1202,6 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
Selected tool is not a drill
Wybrane narzędzie nie jest wiertłem
-
-
- Illegal arc: Start and end radii not equal
- Niedozwolony łuk: Promienie początkowy i końcowy nie są równe
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1037,11 +1282,6 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
CCW
Przeciwnie do ruchu wskazówek zegara
-
-
- List of disabled features
- Lista wyłączonych funkcji
-
Project Setup
@@ -1102,6 +1342,11 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
Utils
Narzędzia
+
+
+ List of disabled features
+ Lista wyłączonych funkcji
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
Tworzy ścieżkę usuwania zadziorów wzdłuż krawędzi lub wokół ściany
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Edytuj ulepszenia mostków
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
PathJob
-
-
- Unsupported stock object %s
- Nieobsługiwany obiekt zapasu %s
-
-
-
- Unsupported stock type %s (%d)
- Nieobsługiwany typ zapasów %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
Stock not a cylinder!
Naddatek nie jest walcem!
+
+
+ Unsupported stock object %s
+ Nieobsługiwany obiekt zapasu %s
+
+
+
+ Unsupported stock type %s (%d)
+ Nieobsługiwany typ zapasów %s (%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
Solid object to be used as stock.
Bryła obiektu do wykorzystania jako naddatek.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Podziel wynik przetwarzania na wiele plików gcode
-
-
-
- If multiple WCS, order the output this way
- Jeśli istnieje wiele układów współrzędnych, uporządkuj wyniki w ten sposób
-
-
-
- The Work Coordinate Systems for the Job
- Roboczy układ współrzędnych dla zadania
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
Collection of all tool controllers for the job
Zbiór wszystkich kontrolerów narzędzi do pracy
+
+
+ The Work Coordinate Systems for the Job
+ Roboczy układ współrzędnych dla zadania
+
+
+
+ If multiple WCS, order the output this way
+ Jeśli istnieje wiele układów współrzędnych, uporządkuj wyniki w ten sposób
+
+
+
+ Split output into multiple gcode files
+ Podziel wynik przetwarzania na wiele plików gcode
+
+
+
+ Select the Type of Job
+ Wybierz typ Zadania
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@ Obrotowy: Skanowanie obrotowe w 4 osiach.
PathOp
-
-
- The base geometry for this operation
- Podstawowa geometria dla tej operacji
-
-
-
- Holds the calculated value for the StartDepth
- Zatrzymuje obliczoną wartość dla StartDepth
-
-
-
- Holds the calculated value for the FinalDepth
- Zatrzymuje obliczoną wartość dla FinalDepth
-
-
-
- Holds the diameter of the tool
- Utrzymuje średnicę narzędzia
-
-
-
- Holds the max Z value of Stock
- Przechowuje maksymalną wartość Z naddatku
-
-
-
- Holds the min Z value of Stock
- Utrzymuje minimalną wartość Z naddatku
-
-
-
- Make False, to prevent operation from generating code
- Wykonaj jako zaprzeczenie, aby zapobiec operacji przy generowaniu kodu
-
-
-
- An optional comment for this Operation
- Opcjonalny komentarz do tej operacji
-
-
-
- User Assigned Label
- Etykieta przypisana przez użytkownika
-
-
-
- Operations Cycle Time Estimation
- Szacunkowy czas trwania cyklu operacji
-
-
-
- Base locations for this operation
- Lokalizacje bazowe dla tej operacji
-
-
-
- Coolant mode for this operation
- Tryb chłodzenia dla tej operacji
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Głębokość początkowej obróbki w Z
-
-
-
- Final Depth of Tool- lowest value in Z
- Końcowa głębokość dla narzędzia - najniższa wartość w kierunku Z
-
-
-
- Starting Depth internal use only for derived values
- Wewnętrzne wykorzystanie głębokości początkowej tylko dla wartości pochodnych
-
-
-
- Incremental Step Down of Tool
- Przyrostowe obniżanie narzędzia
-
-
-
- Maximum material removed on final pass.
- Maksymalny materiał usunięty przy finalnym przebiegu.
-
-
-
- The height needed to clear clamps and obstructions
- Wysokość potrzebna, aby minąć zaciski i przeszkody
-
-
-
- Rapid Safety Height between locations.
- Szybki Wzrost Bezpieczeństwa między lokalizacjami.
-
-
-
- The start point of this path
- Punkt początkowy tej ścieżki
-
-
-
- Make True, if specifying a Start Point
- Upewnij się, że określasz punkt początkowy
-
-
-
- Lower limit of the turning diameter
- Minimalna średnica toczenia
-
-
-
- Upper limit of the turning diameter.
- Maksymalna średnica toczenia.
-
-
-
- Coolant option for this operation
- Opcja chłodzenia dla tej operacji
-
Edit
@@ -1667,11 +1784,131 @@ If it is necessary to set the FinalDepth manually please select a different oper
Pick Start Point
Wybierz punkt początkowy
+
+
+ Make False, to prevent operation from generating code
+ Wykonaj jako zaprzeczenie, aby zapobiec operacji przy generowaniu kodu
+
+
+
+ The base geometry for this operation
+ Podstawowa geometria dla tej operacji
+
+
+
+ Holds the calculated value for the StartDepth
+ Zatrzymuje obliczoną wartość dla StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Zatrzymuje obliczoną wartość dla FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Utrzymuje średnicę narzędzia
+
+
+
+ Holds the max Z value of Stock
+ Przechowuje maksymalną wartość Z naddatku
+
+
+
+ Holds the min Z value of Stock
+ Utrzymuje minimalną wartość Z naddatku
+
+
+
+ An optional comment for this Operation
+ Opcjonalny komentarz do tej operacji
+
+
+
+ User Assigned Label
+ Etykieta przypisana przez użytkownika
+
+
+
+ Base locations for this operation
+ Lokalizacje bazowe dla tej operacji
+
+
+
+ Coolant mode for this operation
+ Tryb chłodzenia dla tej operacji
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Głębokość początkowej obróbki w Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Końcowa głębokość dla narzędzia - najniższa wartość w kierunku Z
+
+
+
+ Starting Depth internal use only for derived values
+ Wewnętrzne wykorzystanie głębokości początkowej tylko dla wartości pochodnych
+
+
+
+ Incremental Step Down of Tool
+ Przyrostowe obniżanie narzędzia
+
+
+
+ Maximum material removed on final pass.
+ Maksymalny materiał usunięty przy finalnym przebiegu.
+
+
+
+ The height needed to clear clamps and obstructions
+ Wysokość potrzebna, aby minąć zaciski i przeszkody
+
+
+
+ Rapid Safety Height between locations.
+ Szybki Wzrost Bezpieczeństwa między lokalizacjami.
+
+
+
+ The start point of this path
+ Punkt początkowy tej ścieżki
+
+
+
+ Make True, if specifying a Start Point
+ Upewnij się, że określasz punkt początkowy
+
+
+
+ Lower limit of the turning diameter
+ Minimalna średnica toczenia
+
+
+
+ Upper limit of the turning diameter.
+ Maksymalna średnica toczenia.
+
+
+
+ Coolant option for this operation
+ Opcja chłodzenia dla tej operacji
+
Job Cycle Time Estimation
Szacowanie czasu pracy
+
+
+ Operations Cycle Time Estimation
+ Szacunkowy czas trwania cyklu operacji
+
PathPlane
@@ -1734,29 +1971,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Głębokość końcowa ustawiona poniżej Z min dla wybranej(-ych) powierzchni.
-
- PathPocketShape
-
-
- Default length of extensions.
- Domyślna długość przedłużeń.
-
-
-
- List of features to extend.
- Lista elementów do rozszerzenia.
-
-
-
- When enabled connected extension edges are combined to wires.
- Gdy ta opcja jest włączona, krawędzie połączonych wyciągnięć są łączone i tworzone są ciągi.
-
-
-
- Uses the outline of the base geometry.
- Używa konturu geometrii podstawowej.
-
-
PathProfile
@@ -1830,34 +2044,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
W przypadku otwartych krawędzi sprawdź głębokość końcową dla tej operacji.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Edytuj koszyk właściwości
-
-
-
- Create PropertyBag
- Utwórz koszyk właściwości
-
-
-
- PropertyBag
- Pojemnik na atrybuty narzędzia skrawającego
-
-
-
- Creates an object which can be used to store reference properties.
- Tworzy obiekt, który może być używany do przechowywania właściwości odniesienia.
-
-
-
- List of custom property groups
- Lista niestandardowych grup właściwości
-
-
PathSlot
@@ -2496,12 +2682,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Clearing
- Clearing
+ Oczyszczanie
Profiling
- Profiling
+ Profilowanie
@@ -2795,7 +2981,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Length/Radius positive not Null
- Length/Radius positive not Null
+ Długość / Promień wartość dodatnia różna od zera
@@ -2888,59 +3074,69 @@ If it is necessary to set the FinalDepth manually please select a different oper
Angle of ramp.
Kąt rampy.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Helisa
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Niestandardowe
+
RampEntry Dress-up
Ulepszenie RampEntry
+
+
+ Please select one path object
+ Proszę wybierz jeden obiekt ścieżki
+
+
+
+ The selected object is not a path
+ Wybrany obiekt nie jest ścieżką
+
+
+
+ Please select a Profile object
+ Proszę wybrać profil objektu
+
Path_DressupTag
-
-
- The base path to modify
- Ścieżka bazowa do modyfikacji
-
-
-
- Width of tags.
- Szerokość pola mocującego.
-
-
-
- Height of tags.
- Wysokość pola mocującego.
-
-
-
- Angle of tag plunge and ascent.
- Kąt zanurzenia i wzniesienia pola mocującego.
-
-
-
- Radius of the fillet for the tag.
- Promień zaokrąglenia dla pola mocującego.
-
-
-
- Locations of inserted holding tags
- Pozycje wstawionych pól mocujących
-
-
-
- IDs of disabled holding tags
- ID wyłączonych pól mocujących
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Współczynnik określający # segmentów użytych do orientacyjnego zaokrąglenia pól mocujących.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Nie można wstawić pól mocujących dla tej ścieżki - proszę wybrać ścieżkę profilu
-
The selected object is not a path
@@ -2986,6 +3182,46 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Tag Dress-up
Tworzy ulepszenie pól mocujących
+
+
+ The base path to modify
+ Ścieżka bazowa do modyfikacji
+
+
+
+ Width of tags.
+ Szerokość pola mocującego.
+
+
+
+ Height of tags.
+ Wysokość pola mocującego.
+
+
+
+ Angle of tag plunge and ascent.
+ Kąt zanurzenia i wzniesienia pola mocującego.
+
+
+
+ Radius of the fillet for the tag.
+ Promień zaokrąglenia dla pola mocującego.
+
+
+
+ Locations of inserted holding tags
+ Pozycje wstawionych pól mocujących
+
+
+
+ IDs of disabled holding tags
+ ID wyłączonych pól mocujących
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Współczynnik określający # segmentów użytych do orientacyjnego zaokrąglenia pól mocujących.
+
No Base object found.
@@ -3006,6 +3242,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Base Path is empty.
Baza ścieżki jest pusta.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Nie można wstawić pól mocujących dla tej ścieżki - proszę wybrać ścieżkę profilu
+
Path_DressupZCorrect
@@ -3045,12 +3286,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
G99
- G99
+ G99
G98
- G98
+ G98
@@ -3099,6 +3340,19 @@ If it is necessary to set the FinalDepth manually please select a different oper
Operacje grawerowania
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Eksport szablonu
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Eksportuje zadanie ścieżki jako szablon do użycia w innych zadaniach
+
+
Path_Helix
@@ -3195,6 +3449,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
Exports Path Job as a template to be used for other jobs
Eksportuje zadanie ścieżki jako szablon do użycia w innych zadaniach
+
+
+ Edit
+ Edycja
+
+
+
+ Stock not a cylinder!
+ Naddatek nie jest walcem!
+
Edit Job
@@ -3215,6 +3479,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
All Files (*.*)
Wszystkie pliki (*.*)
+
+
+ Unsupported stock object %s
+ Nieobsługiwany obiekt zapasu %s
+
+
+
+ Unsupported stock type %s (%d)
+ Nieobsługiwany typ zapasów %s (%d)
+
Model Selection
@@ -3225,6 +3499,71 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Job
Utwórz zadanie
+
+
+ Fixture
+ Uchwyty
+
+
+
+ Tool
+ Narzędzie
+
+
+
+ Operation
+ Operacja
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Bryły
+
+
+
+ Jobs
+ Zadania
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Baza -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Pudełko: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Cylinder: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Nieobsługiwany typ naddatku
+
Path_MillFace
@@ -3247,6 +3586,24 @@ If it is necessary to set the FinalDepth manually please select a different oper
Przełącz aktywne stadium operacji
+
+ Path_Operation
+
+
+ None
+ Brak
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3456,6 +3813,14 @@ If it is necessary to set the FinalDepth manually please select a different oper
Profiluj cały model, wybrane ściany lub wybrane krawędzie
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ Pojemnik na atrybuty narzędzia skrawającego
+
+
Path_Sanity
@@ -3766,6 +4131,136 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Surface
+
+
+ BaseBoundBox
+ Punkt bazowy obiektu Ramki otaczającej
+
+
+
+ Stock
+ Naddatek
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Niestandardowe
+
+
+
+ Conventional
+ Konwencjonalne
+
+
+
+ Climb
+ Podejście
+
+
+
+ Circular
+ Okrągły
+
+
+
+ CircularZigZag
+ Okrągły zygzak
+
+
+
+ Line
+ Linia
+
+
+
+ Offset
+ Odsunięcie
+
+
+
+ Spiral
+ Spirala
+
+
+
+ ZigZag
+ Zygzak
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Zbiorczo
+
+
+
+ Individually
+ Indywidualnie
+
+
+
+ Single-pass
+ Pojedyncze przejście
+
+
+
+ Multi-pass
+ Wielokrotne przejście
+
+
+
+ None
+ Brak
+
+
+
+ Only
+ Wyłącznie
+
+
+
+ First
+ Pierwszy
+
+
+
+ Last
+ Ostatni
+
+
+
+ Planar
+ Płaski
+
+
+
+ Rotational
+ Rotacja
+
3D Surface
@@ -3792,22 +4287,22 @@ If it is necessary to set the FinalDepth manually please select a different oper
Metric Internal
- Metric Internal
+ Metryczny - calowy
Imperial Internal
- Imperial Internal
+ Calowy - calowy
LeftHand
- LeftHand
+ Lewy
RightHand
- RightHand
+ Prawy
@@ -4018,6 +4513,183 @@ If it is necessary to set the FinalDepth manually please select a different oper
Utwórz operację linii poziomu z modelu
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ Operacja wymaga zainstalowania OpenCamLib.
+
+
+
+ OCL Dropcutter
+ Frezowanie OCL
+
+
+
+ Experimental
+ Eksperymentalne
+
+
+
+ BaseBoundBox
+ Punkt bazowy obiektu Ramki otaczającej
+
+
+
+ Stock
+ Naddatek
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Niestandardowe
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Okrągły
+
+
+
+ CircularZigZag
+ Okrągły zygzak
+
+
+
+ Line
+ Linia
+
+
+
+ Offset
+ Odsunięcie
+
+
+
+ Spiral
+ Spirala
+
+
+
+ ZigZag
+ Zygzak
+
+
+
+ Conventional
+ Konwencjonalne
+
+
+
+ Climb
+ Podejście
+
+
+
+ None
+ Brak
+
+
+
+ Collectively
+ Zbiorczo
+
+
+
+ Individually
+ Indywidualnie
+
+
+
+ Single-pass
+ Pojedyncze przejście
+
+
+
+ Multi-pass
+ Wielokrotne przejście
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Edytuj ulepszenia mostków
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Domyślna długość przedłużeń.
+
+
+
+ List of features to extend.
+ Lista elementów do rozszerzenia.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ Gdy ta opcja jest włączona, krawędzie połączonych wyciągnięć są łączone i tworzone są ciągi.
+
+
+
+ Uses the outline of the base geometry.
+ Używa konturu geometrii podstawowej.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Edytuj koszyk właściwości
+
+
+
+ Create PropertyBag
+ Utwórz koszyk właściwości
+
+
+
+ PropertyBag
+ Pojemnik na atrybuty narzędzia skrawającego
+
+
+
+ Creates an object which can be used to store reference properties.
+ Tworzy obiekt, który może być używany do przechowywania właściwości odniesienia.
+
+
+
+ List of custom property groups
+ Lista niestandardowych grup właściwości
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.qm b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.qm
index 21be520e8b..df74590f0d 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.qm and b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts
index 1dda80c106..7a6c445993 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts
@@ -213,10 +213,20 @@
The Z height of the hop
A altura de Z para o salto
+
+
+ Default length of extensions.
+ Tamanho padrão das extensões.
+
+
+
+ List of features to extend.
+ Lista de recursos a estender.
+
Stop processing
- Stop processing
+ Parar processamento
@@ -243,6 +253,111 @@
The output location for the probe data to be written
O local de saída para gravar os dados da sonda
+
+
+ The base geometry for this operation
+ A geometria base para esta operação
+
+
+
+ Holds the calculated value for the StartDepth
+ Contém o valor calculado para a profundidade inicial
+
+
+
+ Holds the calculated value for the FinalDepth
+ Contém o valor calculado para a profundidade final
+
+
+
+ Holds the diameter of the tool
+ Contém o diâmetro da ferramenta
+
+
+
+ Holds the max Z value of Stock
+ Mantem o valor Z máximo de Stock (Estoque)
+
+
+
+ Holds the min Z value of Stock
+ Mantém o valor mínimo Z do estoque
+
+
+
+ Make False, to prevent operation from generating code
+ Falso, para impedir a operação de geração de código
+
+
+
+ An optional comment for this Operation
+ Um comentário opcional para esta operação
+
+
+
+ User Assigned Label
+ Rótulo atribuído pelo utilizador
+
+
+
+ Operations Cycle Time Estimation
+ Estimativa do tempo do ciclo de operações
+
+
+
+ Base locations for this operation
+ Posições de base para esta operação
+
+
+
+ Coolant mode for this operation
+ Modo de resfriamento para esta operação
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Profundidade inicial da ferramenta - primeira profundidade de corte em Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Profundidade final da ferramenta - menor valor em Z
+
+
+
+ Incremental Step Down of Tool
+ Passo incremental para baixo da ferramenta
+
+
+
+ Maximum material removed on final pass.
+ Máximo de material removido no passo final
+
+
+
+ Rapid Safety Height between locations.
+ Altura de segurança rápida entre locais.
+
+
+
+ The start point of this path
+ O ponto de partida desta projeção
+
+
+
+ Lower limit of the turning diameter
+ Limite inferior do diâmetro de giro
+
+
+
+ Upper limit of the turning diameter.
+ Limite superior do diâmetro de giro.
+
+
+
+ Coolant option for this operation
+ Opção de resfriamento para esta operação
+
Additional base objects to be engraved
@@ -256,7 +371,7 @@
Vcarve Tolerance
- Vcarve Tolerance
+ Tolerância do Vcarve
@@ -333,11 +448,6 @@
Fixture Offset Number
Offset de fixação
-
-
- Make False, to prevent operation from generating code
- Falso, para impedir a operação de geração de código
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
O gcode a ser inserido
+
+
+ Angle of ramp.
+ Ângulo da rampa.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Velocidade de avanço personalizada
+
+
+ Width of tags.
+ Largura das etiquetas.
+
+
+
+ Height of tags.
+ Altura das etiquetas.
+
+
+
+ Angle of tag plunge and ascent.
+ Ângulo da etiqueta de mergulho e ascensão.
+
+
+
+ Radius of the fillet for the tag.
+ Raio do Boleado (fillet) para a etiqueta.
+
+
+
+ Locations of inserted holding tags
+ Localização das etiquetas de fixação inseridas
+
+
+
+ IDs of disabled holding tags
+ IDs das etiquetas de fixação desativadas
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expressão usada para o passo de profundidade de novas operações.
-
-
- Start pocketing at center or boundary
- Começar a embolsar(pocket) no centro ou o na borda
-
-
-
- Percent of cutter diameter to step over on each pass
- Percentagem do diâmetro da fresa para sobrepor a cada passagem
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Deslocamento extra a ser aplicado à operação. A direção depende da operação.
+
+
+ Start pocketing at center or boundary
+ Começar a embolsar(pocket) no centro ou o na borda
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Percentagem do diâmetro da fresa para sobrepor a cada passagem
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Tenta evitar retrações desnecessárias.
+
+
+ The side of path to insert bones
+ O lado da trajectória para inserir ossos
+
+
+
+ The style of bones
+ O estilo de ossos
+
+
+
+ Bones that aren't dressed up
+ Ossos que não estão mascarados
+
+
+
+ The algorithm to determine the bone length
+ O algoritmo para determinar o comprimento do osso
+
+
+
+ Dressup length if Incision == custom
+ Comprimento da trajetória adicional se incisão = = personalizada
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ Lista de grupos de propriedades personalizadas
+
The point file from the surface probing.
@@ -806,7 +981,7 @@
Split Arcs into discrete segments
- Split Arcs into discrete segments
+ Dividir Arcos em segmentos discretos
@@ -848,6 +1023,76 @@
The tool used by this controller
A ferramenta usada por este controlador
+
+
+ List of disabled features
+ Lista de recursos desactivados
+
+
+
+ The NC output file for this project
+ O arquivo de saída NC para este projeto
+
+
+
+ Select the Post Processor
+ Selecione o Pós-processador
+
+
+
+ Last Time the Job was post-processed
+ Última vez que o trabalho foi pós-processado
+
+
+
+ An optional description for this job
+ Uma descrição opcional para este trabalho
+
+
+
+ Job Cycle Time Estimation
+ Estimativa do tempo de ciclo de trabalho
+
+
+
+ Solid object to be used as stock.
+ Objeto sólido para ser usada como estoque.
+
+
+
+ Select the Type of Job
+ Selecione o Tipo de Trabalho
+
+
+
+ Split output into multiple gcode files
+ Dividir a saída em vários arquivos gcode
+
+
+
+ If multiple WCS, order the output this way
+ Se houver múltiplos sistemas de coordenadas, ordenar a saída desta forma
+
+
+
+ The Work Coordinate Systems for the Job
+ Os sistemas de coordenadas de trabalho para este trabalho
+
+
+
+ SetupSheet holding the settings for this job
+ Folha de configurações para esta tarefa
+
+
+
+ The base objects for all operations
+ Os objetos de base para todas as operações
+
+
+
+ Collection of all tool controllers for the job
+ Coleção de todos os controladores de ferramenta para o trabalho
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
Trabalho %s não encontrado
+
+
+ Illegal arc: Start and end radii not equal
+ Arco ilegal: Raios de início e fim não são iguais
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
A ferramenta selecionada não é uma broca
-
-
- Illegal arc: Start and end radii not equal
- Arco ilegal: Raios de início e fim não são iguais
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
Sentido Anti-horário
-
-
- List of disabled features
- Lista de recursos desactivados
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utilidades
+
+
+ List of disabled features
+ Lista de recursos desactivados
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Cria uma trajetória de rebarbamento ao longo das arestas ou em torno de faces
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Edita as etiquetas de fixação da mascara
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Tipo de estoque não suportado%s
-
-
-
- Unsupported stock type %s (%d)
- Tipo de estoque não suportado %s(%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
O estoque não é um cilindro!
+
+
+ Unsupported stock object %s
+ Tipo de estoque não suportado%s
+
+
+
+ Unsupported stock type %s (%d)
+ Tipo de estoque não suportado %s(%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Objeto sólido para ser usada como estoque.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Dividir a saída em vários arquivos gcode
-
-
-
- If multiple WCS, order the output this way
- Se houver múltiplos sistemas de coordenadas, ordenar a saída desta forma
-
-
-
- The Work Coordinate Systems for the Job
- Os sistemas de coordenadas de trabalho para este trabalho
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Coleção de todos os controladores de ferramenta para o trabalho
+
+
+ The Work Coordinate Systems for the Job
+ Os sistemas de coordenadas de trabalho para este trabalho
+
+
+
+ If multiple WCS, order the output this way
+ Se houver múltiplos sistemas de coordenadas, ordenar a saída desta forma
+
+
+
+ Split output into multiple gcode files
+ Dividir a saída em vários arquivos gcode
+
+
+
+ Select the Type of Job
+ Selecione o Tipo de Trabalho
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- A geometria base para esta operação
-
-
-
- Holds the calculated value for the StartDepth
- Contém o valor calculado para a profundidade inicial
-
-
-
- Holds the calculated value for the FinalDepth
- Contém o valor calculado para a profundidade final
-
-
-
- Holds the diameter of the tool
- Contém o diâmetro da ferramenta
-
-
-
- Holds the max Z value of Stock
- Mantem o valor Z máximo de Stock (Estoque)
-
-
-
- Holds the min Z value of Stock
- Mantém o valor mínimo Z do estoque
-
-
-
- Make False, to prevent operation from generating code
- Falso, para impedir a operação de geração de código
-
-
-
- An optional comment for this Operation
- Um comentário opcional para esta operação
-
-
-
- User Assigned Label
- Rótulo atribuído pelo utilizador
-
-
-
- Operations Cycle Time Estimation
- Estimativa do tempo do ciclo de operações
-
-
-
- Base locations for this operation
- Posições de base para esta operação
-
-
-
- Coolant mode for this operation
- Modo de resfriamento para esta operação
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Profundidade inicial da ferramenta - primeira profundidade de corte em Z
-
-
-
- Final Depth of Tool- lowest value in Z
- Profundidade final da ferramenta - menor valor em Z
-
-
-
- Starting Depth internal use only for derived values
- Iniciar uso interno de Depth apenas para valores derivados
-
-
-
- Incremental Step Down of Tool
- Passo incremental para baixo da ferramenta
-
-
-
- Maximum material removed on final pass.
- Máximo de material removido no passo final
-
-
-
- The height needed to clear clamps and obstructions
- A altura necessária para desviar as braçadeiras e obstruções
-
-
-
- Rapid Safety Height between locations.
- Altura de segurança rápida entre locais.
-
-
-
- The start point of this path
- O ponto de partida desta projeção
-
-
-
- Make True, if specifying a Start Point
- Verdadeiro, especificando um ponto de partida
-
-
-
- Lower limit of the turning diameter
- Limite inferior do diâmetro de giro
-
-
-
- Upper limit of the turning diameter.
- Limite superior do diâmetro de giro.
-
-
-
- Coolant option for this operation
- Opção de resfriamento para esta operação
-
Edit
@@ -1668,11 +1785,131 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci
Pick Start Point
Escolher Ponto Inicial
+
+
+ Make False, to prevent operation from generating code
+ Falso, para impedir a operação de geração de código
+
+
+
+ The base geometry for this operation
+ A geometria base para esta operação
+
+
+
+ Holds the calculated value for the StartDepth
+ Contém o valor calculado para a profundidade inicial
+
+
+
+ Holds the calculated value for the FinalDepth
+ Contém o valor calculado para a profundidade final
+
+
+
+ Holds the diameter of the tool
+ Contém o diâmetro da ferramenta
+
+
+
+ Holds the max Z value of Stock
+ Mantem o valor Z máximo de Stock (Estoque)
+
+
+
+ Holds the min Z value of Stock
+ Mantém o valor mínimo Z do estoque
+
+
+
+ An optional comment for this Operation
+ Um comentário opcional para esta operação
+
+
+
+ User Assigned Label
+ Rótulo atribuído pelo utilizador
+
+
+
+ Base locations for this operation
+ Posições de base para esta operação
+
+
+
+ Coolant mode for this operation
+ Modo de resfriamento para esta operação
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Profundidade inicial da ferramenta - primeira profundidade de corte em Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Profundidade final da ferramenta - menor valor em Z
+
+
+
+ Starting Depth internal use only for derived values
+ Iniciar uso interno de Depth apenas para valores derivados
+
+
+
+ Incremental Step Down of Tool
+ Passo incremental para baixo da ferramenta
+
+
+
+ Maximum material removed on final pass.
+ Máximo de material removido no passo final
+
+
+
+ The height needed to clear clamps and obstructions
+ A altura necessária para desviar as braçadeiras e obstruções
+
+
+
+ Rapid Safety Height between locations.
+ Altura de segurança rápida entre locais.
+
+
+
+ The start point of this path
+ O ponto de partida desta projeção
+
+
+
+ Make True, if specifying a Start Point
+ Verdadeiro, especificando um ponto de partida
+
+
+
+ Lower limit of the turning diameter
+ Limite inferior do diâmetro de giro
+
+
+
+ Upper limit of the turning diameter.
+ Limite superior do diâmetro de giro.
+
+
+
+ Coolant option for this operation
+ Opção de resfriamento para esta operação
+
Job Cycle Time Estimation
Estimativa do tempo de ciclo de trabalho
+
+
+ Operations Cycle Time Estimation
+ Estimativa do tempo do ciclo de operações
+
PathPlane
@@ -1735,29 +1972,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci
Profundidade final definida abaixo de ZMin para faces selecionadas.
-
- PathPocketShape
-
-
- Default length of extensions.
- Tamanho padrão das extensões.
-
-
-
- List of features to extend.
- Lista de recursos a estender.
-
-
-
- When enabled connected extension edges are combined to wires.
- Quando ativado, as bordas de extensão conectadas são combinadas aos fios.
-
-
-
- Uses the outline of the base geometry.
- Usa o contorno da geometria base.
-
-
PathProfile
@@ -1831,34 +2045,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci
Para arestas abertas, verifique a profundidade final para esta operação.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Editar PropertyBag
-
-
-
- Create PropertyBag
- Criar PropertyBag
-
-
-
- PropertyBag
- PropertyBag
-
-
-
- Creates an object which can be used to store reference properties.
- Cria um objeto que pode ser usado para armazenar propriedades de referência.
-
-
-
- List of custom property groups
- Lista de grupos de propriedades personalizadas
-
-
PathSlot
@@ -2493,7 +2679,7 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci
Clearing
- Clearing
+ Limpando
@@ -2885,59 +3071,69 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci
Angle of ramp.
Ângulo da rampa.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Hélice
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Personalizado
+
RampEntry Dress-up
Trajetória adicional da rampa de entrada
+
+
+ Please select one path object
+ Por favor selecione uma trajetória
+
+
+
+ The selected object is not a path
+ O objeto selecionado não é uma trajetória
+
+
+
+ Please select a Profile object
+ Por favor, escolha um perfil
+
Path_DressupTag
-
-
- The base path to modify
- O caminho de base para modificar
-
-
-
- Width of tags.
- Largura das etiquetas.
-
-
-
- Height of tags.
- Altura das etiquetas.
-
-
-
- Angle of tag plunge and ascent.
- Ângulo da etiqueta de mergulho e ascensão.
-
-
-
- Radius of the fillet for the tag.
- Raio do Boleado (fillet) para a etiqueta.
-
-
-
- Locations of inserted holding tags
- Localização das etiquetas de fixação inseridas
-
-
-
- IDs of disabled holding tags
- IDs das etiquetas de fixação desativadas
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Factor determinando o número de segmentos usados para aproximar etiquetas arredondadas.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Não é possível inserir etiquetas de fixação para este caminho - por favor selecione um caminho de perfil
-
The selected object is not a path
@@ -2983,6 +3179,46 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci
Create Tag Dress-up
Criar etiqueta de trajetória adicional
+
+
+ The base path to modify
+ O caminho de base para modificar
+
+
+
+ Width of tags.
+ Largura das etiquetas.
+
+
+
+ Height of tags.
+ Altura das etiquetas.
+
+
+
+ Angle of tag plunge and ascent.
+ Ângulo da etiqueta de mergulho e ascensão.
+
+
+
+ Radius of the fillet for the tag.
+ Raio do Boleado (fillet) para a etiqueta.
+
+
+
+ Locations of inserted holding tags
+ Localização das etiquetas de fixação inseridas
+
+
+
+ IDs of disabled holding tags
+ IDs das etiquetas de fixação desativadas
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Factor determinando o número de segmentos usados para aproximar etiquetas arredondadas.
+
No Base object found.
@@ -3003,6 +3239,11 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci
Base Path is empty.
A trajetória de base está vazia.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Não é possível inserir etiquetas de fixação para este caminho - por favor selecione um caminho de perfil
+
Path_DressupZCorrect
@@ -3096,6 +3337,19 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci
Operação de gravura
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Exportar Modelo
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Exporta a tarefa de trajetória como um modelo a ser usado para outras tarefas
+
+
Path_Helix
@@ -3192,6 +3446,16 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci
Exports Path Job as a template to be used for other jobs
Exporta a tarefa de trajetória como um modelo a ser usado para outras tarefas
+
+
+ Edit
+ Editar
+
+
+
+ Stock not a cylinder!
+ O estoque não é um cilindro!
+
Edit Job
@@ -3212,6 +3476,16 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci
All Files (*.*)
Todos os arquivos (*.*)
+
+
+ Unsupported stock object %s
+ Tipo de estoque não suportado%s
+
+
+
+ Unsupported stock type %s (%d)
+ Tipo de estoque não suportado %s(%d)
+
Model Selection
@@ -3222,6 +3496,71 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci
Create Job
Criar Tarefa
+
+
+ Fixture
+ Fixação
+
+
+
+ Tool
+ Ferramenta
+
+
+
+ Operation
+ Operação
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Sólidos
+
+
+
+ Jobs
+ Tarefas
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Cubo: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Cilindro: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Tipo de estoque não suportado
+
Path_MillFace
@@ -3244,6 +3583,24 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci
Ativar/desativar o estado ativo da operação
+
+ Path_Operation
+
+
+ None
+ Nenhum
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3453,6 +3810,14 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci
Perfilar o modelo inteiro, faces selecionadas ou arestas selecionadas
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
@@ -3763,6 +4128,136 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Personalizado
+
+
+
+ Conventional
+ Convencional
+
+
+
+ Climb
+ Subir
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Linha
+
+
+
+ Offset
+ Deslocamento
+
+
+
+ Spiral
+ Espiral
+
+
+
+ ZigZag
+ Zigue-zague
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Coletivamente
+
+
+
+ Individually
+ Individualmente
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-passe
+
+
+
+ None
+ Nenhum
+
+
+
+ Only
+ Apenas
+
+
+
+ First
+ Primeiro
+
+
+
+ Last
+ Último
+
+
+
+ Planar
+ Planar
+
+
+
+ Rotational
+ Rotacional
+
3D Surface
@@ -4015,6 +4510,183 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci
Crie uma operação de linha de água a partir de um modelo
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ Esta operação requer a instalação do OpenCamLib.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Personalizado
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Linha
+
+
+
+ Offset
+ Deslocamento
+
+
+
+ Spiral
+ Espiral
+
+
+
+ ZigZag
+ Zigue-zague
+
+
+
+ Conventional
+ Convencional
+
+
+
+ Climb
+ Subir
+
+
+
+ None
+ Nenhum
+
+
+
+ Collectively
+ Coletivamente
+
+
+
+ Individually
+ Individualmente
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-passe
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Edita as etiquetas de fixação da mascara
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Tamanho padrão das extensões.
+
+
+
+ List of features to extend.
+ Lista de recursos a estender.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ Quando ativado, as bordas de extensão conectadas são combinadas aos fios.
+
+
+
+ Uses the outline of the base geometry.
+ Usa o contorno da geometria base.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Editar PropertyBag
+
+
+
+ Create PropertyBag
+ Criar PropertyBag
+
+
+
+ PropertyBag
+ PropertyBag
+
+
+
+ Creates an object which can be used to store reference properties.
+ Cria um objeto que pode ser usado para armazenar propriedades de referência.
+
+
+
+ List of custom property groups
+ Lista de grupos de propriedades personalizadas
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.qm b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.qm
index 34b0eb818c..f0ffcad7f5 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.qm and b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts
index d33b5d78e3..0547a5788d 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts
@@ -213,6 +213,16 @@
The Z height of the hop
A altura de Z para o salto
+
+
+ Default length of extensions.
+ Comprimento padrão das extensões.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
Stop processing
@@ -243,6 +253,111 @@
The output location for the probe data to be written
The output location for the probe data to be written
+
+
+ The base geometry for this operation
+ A geometria base para esta operação
+
+
+
+ Holds the calculated value for the StartDepth
+ Contém o valor calculado para a profundidade inicial
+
+
+
+ Holds the calculated value for the FinalDepth
+ Contém o valor calculado para a profundidade final
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ Make False, to prevent operation from generating code
+ Fazer Falso, para impedir a operação de gerar código
+
+
+
+ An optional comment for this Operation
+ Um comentário opcional para esta operação
+
+
+
+ User Assigned Label
+ Etiqueta atribuída pelo utilizador
+
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
+
+
+ Base locations for this operation
+ Posições de base para esta operação
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Profundidade inicial da ferramenta - primeira profundidade de corte em Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Profundidade final da ferramenta - menor valor em Z
+
+
+
+ Incremental Step Down of Tool
+ Passo incremental para baixo da ferramenta
+
+
+
+ Maximum material removed on final pass.
+ Máximo material removido na passagem final.
+
+
+
+ Rapid Safety Height between locations.
+ Altura de segurança rápida entre locais.
+
+
+
+ The start point of this path
+ O ponto de partida desta trajetória
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
Deslocamento (offset) de fixação
-
-
- Make False, to prevent operation from generating code
- Fazer Falso, para impedir a operação de gerar código
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
O gcode para ser inserido
+
+
+ Angle of ramp.
+ Ângulo da rampa.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Custom feed rate
+
+
+ Width of tags.
+ Largura das etiquetas.
+
+
+
+ Height of tags.
+ Altura das etiquetas.
+
+
+
+ Angle of tag plunge and ascent.
+ Ângulo da etiqueta entrada e saída.
+
+
+
+ Radius of the fillet for the tag.
+ Raio do Boleado (fillet) para a etiqueta.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expression used for StepDown of new operations.
-
-
- Start pocketing at center or boundary
- Começar a embolsar(pocketing) no centro ou no perímetro (boundary)
-
-
-
- Percent of cutter diameter to step over on each pass
- Percentagem do diâmetro da fresa para sobrepor a cada passagem
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Deslocamento extra para aplicar à operação. Direção é dependente de operação.
+
+
+ Start pocketing at center or boundary
+ Começar a embolsar(pocketing) no centro ou no perímetro (boundary)
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Percentagem do diâmetro da fresa para sobrepor a cada passagem
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Attempts to avoid unnecessary retractions.
+
+
+ The side of path to insert bones
+ O lado da trajectória para inserir ossos
+
+
+
+ The style of bones
+ O estilo de ossos
+
+
+
+ Bones that aren't dressed up
+ Ossos que não estão mascarados
+
+
+
+ The algorithm to determine the bone length
+ O algoritmo para determinar o comprimento do osso
+
+
+
+ Dressup length if Incision == custom
+ Comprimento da mascara se incisão = = personalizada
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ List of custom property groups
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
A ferramenta usada por este controlador
+
+
+ List of disabled features
+ Lista de recursos desactivados
+
+
+
+ The NC output file for this project
+ O ficheiro de saída NC para este projeto
+
+
+
+ Select the Post Processor
+ Selecione o Pós-processador
+
+
+
+ Last Time the Job was post-processed
+ Last Time the Job was post-processed
+
+
+
+ An optional description for this job
+ Uma descrição opcional para este trabalho
+
+
+
+ Job Cycle Time Estimation
+ Job Cycle Time Estimation
+
+
+
+ Solid object to be used as stock.
+ Objeto sólido para ser usada como armazenamento.
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ Dividir resultado em vários ficheiros gcode
+
+
+
+ If multiple WCS, order the output this way
+ Se múltiplos WCS, ordenar o resultado desta forma
+
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ SetupSheet holding the settings for this job
+ Folha de configurações para este trabalho
+
+
+
+ The base objects for all operations
+ Os objetos base para todas as operações
+
+
+
+ Collection of all tool controllers for the job
+ Coleção de todos os controladores de ferramenta para o trabalho
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
Trabalho não encontrado %s
+
+
+ Illegal arc: Start and end radii not equal
+ Illegal arc: Start and end radii not equal
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
A ferramenta selecionada não é uma broca
-
-
- Illegal arc: Start and end radii not equal
- Illegal arc: Start and end radii not equal
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
CCW
-
-
- List of disabled features
- Lista de recursos desactivados
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utilidades
+
+
+ List of disabled features
+ Lista de recursos desactivados
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Creates a Deburr Path along Edges or around Faces
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Edita as etiquetas de fixação da Mascara
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Tipo de armazenamento não suportado%s
-
-
-
- Unsupported stock type %s (%d)
- Tipo de armazenamento não suportado %s(%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
Não é um cilindro de armazenamento!
+
+
+ Unsupported stock object %s
+ Tipo de armazenamento não suportado%s
+
+
+
+ Unsupported stock type %s (%d)
+ Tipo de armazenamento não suportado %s(%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Objeto sólido para ser usada como armazenamento.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Dividir resultado em vários ficheiros gcode
-
-
-
- If multiple WCS, order the output this way
- Se múltiplos WCS, ordenar o resultado desta forma
-
-
-
- The Work Coordinate Systems for the Job
- The Work Coordinate Systems for the Job
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Coleção de todos os controladores de ferramenta para o trabalho
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ If multiple WCS, order the output this way
+ Se múltiplos WCS, ordenar o resultado desta forma
+
+
+
+ Split output into multiple gcode files
+ Dividir resultado em vários ficheiros gcode
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- A geometria base para esta operação
-
-
-
- Holds the calculated value for the StartDepth
- Contém o valor calculado para a profundidade inicial
-
-
-
- Holds the calculated value for the FinalDepth
- Contém o valor calculado para a profundidade final
-
-
-
- Holds the diameter of the tool
- Holds the diameter of the tool
-
-
-
- Holds the max Z value of Stock
- Holds the max Z value of Stock
-
-
-
- Holds the min Z value of Stock
- Holds the min Z value of Stock
-
-
-
- Make False, to prevent operation from generating code
- Fazer Falso, para impedir a operação de gerar código
-
-
-
- An optional comment for this Operation
- Um comentário opcional para esta operação
-
-
-
- User Assigned Label
- Etiqueta atribuída pelo utilizador
-
-
-
- Operations Cycle Time Estimation
- Operations Cycle Time Estimation
-
-
-
- Base locations for this operation
- Posições de base para esta operação
-
-
-
- Coolant mode for this operation
- Coolant mode for this operation
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Profundidade inicial da ferramenta - primeira profundidade de corte em Z
-
-
-
- Final Depth of Tool- lowest value in Z
- Profundidade final da ferramenta - menor valor em Z
-
-
-
- Starting Depth internal use only for derived values
- Starting Depth internal use only for derived values
-
-
-
- Incremental Step Down of Tool
- Passo incremental para baixo da ferramenta
-
-
-
- Maximum material removed on final pass.
- Máximo material removido na passagem final.
-
-
-
- The height needed to clear clamps and obstructions
- A altura necessária para desviar fixações e obstruções
-
-
-
- Rapid Safety Height between locations.
- Altura de segurança rápida entre locais.
-
-
-
- The start point of this path
- O ponto de partida desta trajetória
-
-
-
- Make True, if specifying a Start Point
- Verdadeiro, se especificar um ponto inicial
-
-
-
- Lower limit of the turning diameter
- Lower limit of the turning diameter
-
-
-
- Upper limit of the turning diameter.
- Upper limit of the turning diameter.
-
-
-
- Coolant option for this operation
- Coolant option for this operation
-
Edit
@@ -1668,11 +1785,131 @@ If it is necessary to set the FinalDepth manually please select a different oper
Pick Start Point
Escolher Ponto Inicial
+
+
+ Make False, to prevent operation from generating code
+ Fazer Falso, para impedir a operação de gerar código
+
+
+
+ The base geometry for this operation
+ A geometria base para esta operação
+
+
+
+ Holds the calculated value for the StartDepth
+ Contém o valor calculado para a profundidade inicial
+
+
+
+ Holds the calculated value for the FinalDepth
+ Contém o valor calculado para a profundidade final
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ An optional comment for this Operation
+ Um comentário opcional para esta operação
+
+
+
+ User Assigned Label
+ Etiqueta atribuída pelo utilizador
+
+
+
+ Base locations for this operation
+ Posições de base para esta operação
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Profundidade inicial da ferramenta - primeira profundidade de corte em Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Profundidade final da ferramenta - menor valor em Z
+
+
+
+ Starting Depth internal use only for derived values
+ Starting Depth internal use only for derived values
+
+
+
+ Incremental Step Down of Tool
+ Passo incremental para baixo da ferramenta
+
+
+
+ Maximum material removed on final pass.
+ Máximo material removido na passagem final.
+
+
+
+ The height needed to clear clamps and obstructions
+ A altura necessária para desviar fixações e obstruções
+
+
+
+ Rapid Safety Height between locations.
+ Altura de segurança rápida entre locais.
+
+
+
+ The start point of this path
+ O ponto de partida desta trajetória
+
+
+
+ Make True, if specifying a Start Point
+ Verdadeiro, se especificar um ponto inicial
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Job Cycle Time Estimation
Job Cycle Time Estimation
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
PathPlane
@@ -1735,29 +1972,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Final depth set below ZMin of face(s) selected.
-
- PathPocketShape
-
-
- Default length of extensions.
- Comprimento padrão das extensões.
-
-
-
- List of features to extend.
- List of features to extend.
-
-
-
- When enabled connected extension edges are combined to wires.
- When enabled connected extension edges are combined to wires.
-
-
-
- Uses the outline of the base geometry.
- Uses the outline of the base geometry.
-
-
PathProfile
@@ -1831,34 +2045,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
For open edges, verify Final Depth for this operation.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Edit PropertyBag
-
-
-
- Create PropertyBag
- Create PropertyBag
-
-
-
- PropertyBag
- PropertyBag
-
-
-
- Creates an object which can be used to store reference properties.
- Creates an object which can be used to store reference properties.
-
-
-
- List of custom property groups
- List of custom property groups
-
-
PathSlot
@@ -2885,59 +3071,69 @@ If it is necessary to set the FinalDepth manually please select a different oper
Angle of ramp.
Ângulo da rampa.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Hélice
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Personalizado
+
RampEntry Dress-up
Mascara de Entrada-da-rampa
+
+
+ Please select one path object
+ Por favor selecione uma trajetória
+
+
+
+ The selected object is not a path
+ O objeto selecionado não é uma trajetória
+
+
+
+ Please select a Profile object
+ Por favor, selecione um objeto perfil
+
Path_DressupTag
-
-
- The base path to modify
- O caminho de base para modificar
-
-
-
- Width of tags.
- Largura das etiquetas.
-
-
-
- Height of tags.
- Altura das etiquetas.
-
-
-
- Angle of tag plunge and ascent.
- Ângulo da etiqueta entrada e saída.
-
-
-
- Radius of the fillet for the tag.
- Raio do Boleado (fillet) para a etiqueta.
-
-
-
- Locations of inserted holding tags
- Locations of inserted holding tags
-
-
-
- IDs of disabled holding tags
- IDs of disabled holding tags
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Factor determining the # of segments used to approximate rounded tags.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Cannot insert holding tags for this path - please select a Profile path
-
The selected object is not a path
@@ -2983,6 +3179,46 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Tag Dress-up
Criar etiqueta de mascara
+
+
+ The base path to modify
+ O caminho de base para modificar
+
+
+
+ Width of tags.
+ Largura das etiquetas.
+
+
+
+ Height of tags.
+ Altura das etiquetas.
+
+
+
+ Angle of tag plunge and ascent.
+ Ângulo da etiqueta entrada e saída.
+
+
+
+ Radius of the fillet for the tag.
+ Raio do Boleado (fillet) para a etiqueta.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Factor determining the # of segments used to approximate rounded tags.
+
No Base object found.
@@ -3003,6 +3239,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Base Path is empty.
A trajetória de base está vazia.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Cannot insert holding tags for this path - please select a Profile path
+
Path_DressupZCorrect
@@ -3096,6 +3337,19 @@ If it is necessary to set the FinalDepth manually please select a different oper
Engraving Operations
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Exportar modelo
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Exporta o trabalho como um modelo para ser usado noutros trabalhos
+
+
Path_Helix
@@ -3192,6 +3446,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
Exports Path Job as a template to be used for other jobs
Exporta o trabalho como um modelo para ser usado noutros trabalhos
+
+
+ Edit
+ Editar
+
+
+
+ Stock not a cylinder!
+ Não é um cilindro de armazenamento!
+
Edit Job
@@ -3212,6 +3476,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
All Files (*.*)
Todos os Ficheiros (*. *)
+
+
+ Unsupported stock object %s
+ Tipo de armazenamento não suportado%s
+
+
+
+ Unsupported stock type %s (%d)
+ Tipo de armazenamento não suportado %s(%d)
+
Model Selection
@@ -3222,6 +3496,71 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Job
Criar trabalho
+
+
+ Fixture
+ Fixação
+
+
+
+ Tool
+ Ferramenta
+
+
+
+ Operation
+ Operação
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Sólidos
+
+
+
+ Jobs
+ Tarefas
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Caixa: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Cilindro: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Tipo de armazenamento não suportado
+
Path_MillFace
@@ -3244,6 +3583,24 @@ If it is necessary to set the FinalDepth manually please select a different oper
Toggle the Active State of the Operation
+
+ Path_Operation
+
+
+ None
+ Nenhum
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3453,6 +3810,14 @@ If it is necessary to set the FinalDepth manually please select a different oper
Profile entire model, selected face(s) or selected edge(s)
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
@@ -3763,6 +4128,136 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Personalizado
+
+
+
+ Conventional
+ Convencional
+
+
+
+ Climb
+ Climb
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Linha
+
+
+
+ Offset
+ Deslocamento paralelo
+
+
+
+ Spiral
+ Espiral
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ None
+ Nenhum
+
+
+
+ Only
+ Only
+
+
+
+ First
+ Primeiro
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Planar
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -4015,6 +4510,183 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create a Waterline Operation from a model
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ This operation requires OpenCamLib to be installed.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Personalizado
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Linha
+
+
+
+ Offset
+ Deslocamento paralelo
+
+
+
+ Spiral
+ Espiral
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Convencional
+
+
+
+ Climb
+ Climb
+
+
+
+ None
+ Nenhum
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Edita as etiquetas de fixação da Mascara
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Comprimento padrão das extensões.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ When enabled connected extension edges are combined to wires.
+
+
+
+ Uses the outline of the base geometry.
+ Uses the outline of the base geometry.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Edit PropertyBag
+
+
+
+ Create PropertyBag
+ Create PropertyBag
+
+
+
+ PropertyBag
+ PropertyBag
+
+
+
+ Creates an object which can be used to store reference properties.
+ Creates an object which can be used to store reference properties.
+
+
+
+ List of custom property groups
+ List of custom property groups
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ro.qm b/src/Mod/Path/Gui/Resources/translations/Path_ro.qm
index 4b4c18e5ba..22dc5fe7cc 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ro.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ro.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ro.ts b/src/Mod/Path/Gui/Resources/translations/Path_ro.ts
index 65d3b86040..a09ec878b4 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_ro.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_ro.ts
@@ -213,6 +213,16 @@
The Z height of the hop
Înălțimea Z a acestui salt
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
Stop processing
@@ -243,6 +253,111 @@
The output location for the probe data to be written
The output location for the probe data to be written
+
+
+ The base geometry for this operation
+ Geometria de bază a acestei operații
+
+
+
+ Holds the calculated value for the StartDepth
+ Conţine valoarea calculată pentru StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Conţine valoarea calculată pentru StartDepth
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ Make False, to prevent operation from generating code
+ Selectează "False" pentru a preveni generarea codului
+
+
+
+ An optional comment for this Operation
+ Un comentariu opțional pentru această Operaţie
+
+
+
+ User Assigned Label
+ Etichetă asignată de către utilizator
+
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
+
+
+ Base locations for this operation
+ Locatii de bază pentru această operaţie
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Adâncimea Z a primei așchii a sculei
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Adâncimea finala a sculei - valoarea minima a lui Z
+
+
+
+ Incremental Step Down of Tool
+ Incrementarea pasului uneltei spre mai jos
+
+
+
+ Maximum material removed on final pass.
+ Maximum materialul eliminat la ultima trecere.
+
+
+
+ Rapid Safety Height between locations.
+ Înălțime de siguranță între locații.
+
+
+
+ The start point of this path
+ Punctul de pornire al acestei traiectorii
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
Numărul de Offset de fixare
-
-
- Make False, to prevent operation from generating code
- Selectează "False" pentru a preveni generarea codului
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
Gcode de introdus
+
+
+ Angle of ramp.
+ Unghiul de rampă.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Custom feed rate
+
+
+ Width of tags.
+ Lăţimea de Tag-uri.
+
+
+
+ Height of tags.
+ Înălţimea etichetelor.
+
+
+
+ Angle of tag plunge and ascent.
+ Unghiul etichetei la coborâri și ridicări.
+
+
+
+ Radius of the fillet for the tag.
+ Raza de racord pentru etichete.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expression used for StepDown of new operations.
-
-
- Start pocketing at center or boundary
- Începe frezarea buzunarului din centru sau de la margine
-
-
-
- Percent of cutter diameter to step over on each pass
- Avansul în procente din diametrul sculei tăietor la fiecare trecere
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Se aplică un decalaj suplimentar la operaţiunea. Direcţia este dependentă de operație.
+
+
+ Start pocketing at center or boundary
+ Începe frezarea buzunarului din centru sau de la margine
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Avansul în procente din diametrul sculei tăietor la fiecare trecere
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Attempts to avoid unnecessary retractions.
+
+
+ The side of path to insert bones
+ Partea traiectoriei sculei pentru a insera o degajare a colțurilor interioare (Dogbone Dressup)
+
+
+
+ The style of bones
+ Stilul de oase (frezare rotundă în colțuri interioare ale buzunarului) [dog bones]
+
+
+
+ Bones that aren't dressed up
+ Frezare suplimentară de compensare pentru colțuri interioare [dog bones]
+
+
+
+ The algorithm to determine the bone length
+ Algoritm pentru a determina lungimea extensiilor de frezare la colțurile interioare
+
+
+
+ Dressup length if Incision == custom
+ Lungime a traiectoriei adiționale și incizie == personalizată
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ List of custom property groups
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
Instrumentul utilizat de către acest controler
+
+
+ List of disabled features
+ Lista caracteristicilor dezactivate
+
+
+
+ The NC output file for this project
+ Fişierul de ieşire NC pentru acest proiect
+
+
+
+ Select the Post Processor
+ Selecționați o post procesre
+
+
+
+ Last Time the Job was post-processed
+ Last Time the Job was post-processed
+
+
+
+ An optional description for this job
+ An optional description for this job
+
+
+
+ Job Cycle Time Estimation
+ Job Cycle Time Estimation
+
+
+
+ Solid object to be used as stock.
+ Obiect solid pentru a fi utilizate ca semifabricat inițial.
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ SetupSheet holding the settings for this job
+ Fișă de control a parametrilor pentru această sarcină de muncă
+
+
+
+ The base objects for all operations
+ The base objects for all operations
+
+
+
+ Collection of all tool controllers for the job
+ Collection of all tool controllers for the job
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
Nu a găsit job %s
+
+
+ Illegal arc: Start and end radii not equal
+ Illegal arc: Start and end radii not equal
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
Selected tool is not a drill
-
-
- Illegal arc: Start and end radii not equal
- Illegal arc: Start and end radii not equal
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
CCW
-
-
- List of disabled features
- Lista caracteristicilor dezactivate
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utils
+
+
+ List of disabled features
+ Lista caracteristicilor dezactivate
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Creates a Deburr Path along Edges or around Faces
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Modificați traiectoria adițională atașată
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Tipul obiectului piesei de bază nu este acceptat%
-
-
-
- Unsupported stock type %s (%d)
- Tip de semifabricat %s (%d) de Neacceptat
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
Brutul nu un cilindru!
+
+
+ Unsupported stock object %s
+ Tipul obiectului piesei de bază nu este acceptat%
+
+
+
+ Unsupported stock type %s (%d)
+ Tip de semifabricat %s (%d) de Neacceptat
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Obiect solid pentru a fi utilizate ca semifabricat inițial.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Split output into multiple gcode files
-
-
-
- If multiple WCS, order the output this way
- If multiple WCS, order the output this way
-
-
-
- The Work Coordinate Systems for the Job
- The Work Coordinate Systems for the Job
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Collection of all tool controllers for the job
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- Geometria de bază a acestei operații
-
-
-
- Holds the calculated value for the StartDepth
- Conţine valoarea calculată pentru StartDepth
-
-
-
- Holds the calculated value for the FinalDepth
- Conţine valoarea calculată pentru StartDepth
-
-
-
- Holds the diameter of the tool
- Holds the diameter of the tool
-
-
-
- Holds the max Z value of Stock
- Holds the max Z value of Stock
-
-
-
- Holds the min Z value of Stock
- Holds the min Z value of Stock
-
-
-
- Make False, to prevent operation from generating code
- Selectează "False" pentru a preveni generarea codului
-
-
-
- An optional comment for this Operation
- Un comentariu opțional pentru această Operaţie
-
-
-
- User Assigned Label
- Etichetă asignată de către utilizator
-
-
-
- Operations Cycle Time Estimation
- Operations Cycle Time Estimation
-
-
-
- Base locations for this operation
- Locatii de bază pentru această operaţie
-
-
-
- Coolant mode for this operation
- Coolant mode for this operation
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Adâncimea Z a primei așchii a sculei
-
-
-
- Final Depth of Tool- lowest value in Z
- Adâncimea finala a sculei - valoarea minima a lui Z
-
-
-
- Starting Depth internal use only for derived values
- Starting Depth internal use only for derived values
-
-
-
- Incremental Step Down of Tool
- Incrementarea pasului uneltei spre mai jos
-
-
-
- Maximum material removed on final pass.
- Maximum materialul eliminat la ultima trecere.
-
-
-
- The height needed to clear clamps and obstructions
- Înălțimea necesita înlăturarea suporţilor și obstacolelor
-
-
-
- Rapid Safety Height between locations.
- Înălțime de siguranță între locații.
-
-
-
- The start point of this path
- Punctul de pornire al acestei traiectorii
-
-
-
- Make True, if specifying a Start Point
- Marchează « true » dacă este spedificat un Punct de Plecare
-
-
-
- Lower limit of the turning diameter
- Lower limit of the turning diameter
-
-
-
- Upper limit of the turning diameter.
- Upper limit of the turning diameter.
-
-
-
- Coolant option for this operation
- Coolant option for this operation
-
Edit
@@ -1668,11 +1785,131 @@ If it is necessary to set the FinalDepth manually please select a different oper
Pick Start Point
Selecționați punctul de plecare
+
+
+ Make False, to prevent operation from generating code
+ Selectează "False" pentru a preveni generarea codului
+
+
+
+ The base geometry for this operation
+ Geometria de bază a acestei operații
+
+
+
+ Holds the calculated value for the StartDepth
+ Conţine valoarea calculată pentru StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Conţine valoarea calculată pentru StartDepth
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ An optional comment for this Operation
+ Un comentariu opțional pentru această Operaţie
+
+
+
+ User Assigned Label
+ Etichetă asignată de către utilizator
+
+
+
+ Base locations for this operation
+ Locatii de bază pentru această operaţie
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Adâncimea Z a primei așchii a sculei
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Adâncimea finala a sculei - valoarea minima a lui Z
+
+
+
+ Starting Depth internal use only for derived values
+ Starting Depth internal use only for derived values
+
+
+
+ Incremental Step Down of Tool
+ Incrementarea pasului uneltei spre mai jos
+
+
+
+ Maximum material removed on final pass.
+ Maximum materialul eliminat la ultima trecere.
+
+
+
+ The height needed to clear clamps and obstructions
+ Înălțimea necesita înlăturarea suporţilor și obstacolelor
+
+
+
+ Rapid Safety Height between locations.
+ Înălțime de siguranță între locații.
+
+
+
+ The start point of this path
+ Punctul de pornire al acestei traiectorii
+
+
+
+ Make True, if specifying a Start Point
+ Marchează « true » dacă este spedificat un Punct de Plecare
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Job Cycle Time Estimation
Job Cycle Time Estimation
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
PathPlane
@@ -1735,29 +1972,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Final depth set below ZMin of face(s) selected.
-
- PathPocketShape
-
-
- Default length of extensions.
- Default length of extensions.
-
-
-
- List of features to extend.
- List of features to extend.
-
-
-
- When enabled connected extension edges are combined to wires.
- When enabled connected extension edges are combined to wires.
-
-
-
- Uses the outline of the base geometry.
- Uses the outline of the base geometry.
-
-
PathProfile
@@ -1831,34 +2045,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
For open edges, verify Final Depth for this operation.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Edit PropertyBag
-
-
-
- Create PropertyBag
- Create PropertyBag
-
-
-
- PropertyBag
- PropertyBag
-
-
-
- Creates an object which can be used to store reference properties.
- Creates an object which can be used to store reference properties.
-
-
-
- List of custom property groups
- List of custom property groups
-
-
PathSlot
@@ -2885,59 +3071,69 @@ If it is necessary to set the FinalDepth manually please select a different oper
Angle of ramp.
Unghiul de rampă.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Spirala
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Personalizat
+
RampEntry Dress-up
Traiectorie adițională rampă de intrare în material
+
+
+ Please select one path object
+ Vă rugăm să selectaţi o traiectori tip obiect
+
+
+
+ The selected object is not a path
+ Obiectul selectat nu este o traiectorie
+
+
+
+ Please select a Profile object
+ Vă rugăm să selectaţi un obiect contur
+
Path_DressupTag
-
-
- The base path to modify
- Traiectoria de bază de modificat
-
-
-
- Width of tags.
- Lăţimea de Tag-uri.
-
-
-
- Height of tags.
- Înălţimea etichetelor.
-
-
-
- Angle of tag plunge and ascent.
- Unghiul etichetei la coborâri și ridicări.
-
-
-
- Radius of the fillet for the tag.
- Raza de racord pentru etichete.
-
-
-
- Locations of inserted holding tags
- Locations of inserted holding tags
-
-
-
- IDs of disabled holding tags
- IDs of disabled holding tags
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Factor determining the # of segments used to approximate rounded tags.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Cannot insert holding tags for this path - please select a Profile path
-
The selected object is not a path
@@ -2983,6 +3179,46 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Tag Dress-up
Creaţi etichete de traiectorie adițională (Dress-up)
+
+
+ The base path to modify
+ Traiectoria de bază de modificat
+
+
+
+ Width of tags.
+ Lăţimea de Tag-uri.
+
+
+
+ Height of tags.
+ Înălţimea etichetelor.
+
+
+
+ Angle of tag plunge and ascent.
+ Unghiul etichetei la coborâri și ridicări.
+
+
+
+ Radius of the fillet for the tag.
+ Raza de racord pentru etichete.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Factor determining the # of segments used to approximate rounded tags.
+
No Base object found.
@@ -3003,6 +3239,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Base Path is empty.
Traiectoria de bază este vidă.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Cannot insert holding tags for this path - please select a Profile path
+
Path_DressupZCorrect
@@ -3096,6 +3337,19 @@ If it is necessary to set the FinalDepth manually please select a different oper
Engraving Operations
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Export șablon
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Exportă traiectoria a şablon pentru a fi utilizate pentru alte sarcini
+
+
Path_Helix
@@ -3192,6 +3446,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
Exports Path Job as a template to be used for other jobs
Exportă traiectoria a şablon pentru a fi utilizate pentru alte sarcini
+
+
+ Edit
+ Editare
+
+
+
+ Stock not a cylinder!
+ Brutul nu un cilindru!
+
Edit Job
@@ -3212,6 +3476,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
All Files (*.*)
Toate fișierele (*.*)
+
+
+ Unsupported stock object %s
+ Tipul obiectului piesei de bază nu este acceptat%
+
+
+
+ Unsupported stock type %s (%d)
+ Tip de semifabricat %s (%d) de Neacceptat
+
Model Selection
@@ -3222,6 +3496,71 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Job
Crează sarcina de lucru
+
+
+ Fixture
+ Punct de fixare
+
+
+
+ Tool
+ Instrument
+
+
+
+ Operation
+ Operation
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Solide
+
+
+
+ Jobs
+ Jobs
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Cutie: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Cilindru: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Tip de semifabricat respins ca piesă de bază
+
Path_MillFace
@@ -3244,6 +3583,24 @@ If it is necessary to set the FinalDepth manually please select a different oper
Toggle the Active State of the Operation
+
+ Path_Operation
+
+
+ None
+ Niciunul
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3453,6 +3810,14 @@ If it is necessary to set the FinalDepth manually please select a different oper
Profile entire model, selected face(s) or selected edge(s)
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
@@ -3763,6 +4128,136 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Personalizat
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Linie
+
+
+
+ Offset
+ Compensare
+
+
+
+ Spiral
+ Spirală
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ None
+ Niciunul
+
+
+
+ Only
+ Only
+
+
+
+ First
+ First
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Planar
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -4015,6 +4510,183 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create a Waterline Operation from a model
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ Această operație necesită ca biblioteca OpenCamLib să fie instalată.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Personalizat
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Linie
+
+
+
+ Offset
+ Compensare
+
+
+
+ Spiral
+ Spirală
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ None
+ Niciunul
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Modificați traiectoria adițională atașată
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ When enabled connected extension edges are combined to wires.
+
+
+
+ Uses the outline of the base geometry.
+ Uses the outline of the base geometry.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Edit PropertyBag
+
+
+
+ Create PropertyBag
+ Create PropertyBag
+
+
+
+ PropertyBag
+ PropertyBag
+
+
+
+ Creates an object which can be used to store reference properties.
+ Creates an object which can be used to store reference properties.
+
+
+
+ List of custom property groups
+ List of custom property groups
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ru.qm b/src/Mod/Path/Gui/Resources/translations/Path_ru.qm
index b440d892ca..a377dbf80c 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ru.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ru.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ru.ts b/src/Mod/Path/Gui/Resources/translations/Path_ru.ts
index 9e98b45379..f5e5f00c45 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_ru.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_ru.ts
@@ -213,10 +213,20 @@
The Z height of the hop
Наивысшее значение по оси Z для этого шага
+
+
+ Default length of extensions.
+ Длина по умолчанию для расширений.
+
+
+
+ List of features to extend.
+ Список элементов для расширения.
+
Stop processing
- Stop processing
+ Остановить обработку
@@ -243,6 +253,111 @@
The output location for the probe data to be written
Расположение (файла) для записи данных зонда probe
+
+
+ The base geometry for this operation
+ Базовая геометрия для этой операции
+
+
+
+ Holds the calculated value for the StartDepth
+ Содержит значение, вычисленное для Стартовой Глубины
+
+
+
+ Holds the calculated value for the FinalDepth
+ Содержит значение, вычисленное для Финальной глубины
+
+
+
+ Holds the diameter of the tool
+ Защищаемый, ограничивающий диаметр инструмента
+
+
+
+ Holds the max Z value of Stock
+ Хранит максимальное значение Z заготовки
+
+
+
+ Holds the min Z value of Stock
+ Хранит минимальное значение Z заготовки
+
+
+
+ Make False, to prevent operation from generating code
+ Установите значение в False, чтобы предотвратить генерацию G-кода для операции
+
+
+
+ An optional comment for this Operation
+ Необязательный комментарий для этой операции
+
+
+
+ User Assigned Label
+ Пользовательская Метка
+
+
+
+ Operations Cycle Time Estimation
+ Оценка времени цикла операций
+
+
+
+ Base locations for this operation
+ Базовое расположение для этой операции
+
+
+
+ Coolant mode for this operation
+ Режим охлаждения для этой операции
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Начальная глубина инструмента - глубина касания по оси Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Конечная глубина инструмента - нижнее значение по оси Z
+
+
+
+ Incremental Step Down of Tool
+ Наращиваемое погружение инструмента
+
+
+
+ Maximum material removed on final pass.
+ Максимально количество материала снимаемое за последний проход.
+
+
+
+ Rapid Safety Height between locations.
+ Безопасная высота быстрого перемещения между позициями.
+
+
+
+ The start point of this path
+ Начальная точка этого пути
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Опция охлаждения для этой операции
+
Additional base objects to be engraved
@@ -296,12 +411,12 @@
The Style of motion into the Path
- The Style of motion into the Path
+ Стиль движения в путь
The Style of motion out of the Path
- The Style of motion out of the Path
+ Стиль движения из Пути
@@ -333,11 +448,6 @@
Fixture Offset Number
Номер отступа крепления
-
-
- Make False, to prevent operation from generating code
- Установите значение в False, чтобы предотвратить генерацию G-кода для операции
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
Gcode будет вставлен
+
+
+ Angle of ramp.
+ Угол наклона входа.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Скорость подачи при холостых перемещениях
+
+
+ Width of tags.
+ Ширина технолог. перемычки.
+
+
+
+ Height of tags.
+ Высота технолог. перемычки.
+
+
+
+ Angle of tag plunge and ascent.
+ Угол погружения и подъёма технологической перемычки.
+
+
+
+ Radius of the fillet for the tag.
+ Радиус скругления кромки технологической перемычки.
+
+
+
+ Locations of inserted holding tags
+ Места вставленных технологических перемычек
+
+
+
+ IDs of disabled holding tags
+ Идентификаторы отключенных технологических перемычек
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Выражение, используемое для StepDown (шага по глубине) новых операций.
-
-
- Start pocketing at center or boundary
- Начинать обработку кармана из центра или от границ
-
-
-
- Percent of cutter diameter to step over on each pass
- Процент диаметра фрезы для шага на каждом проходе
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Дополнительное смещение применяется к операции. Направление зависит от операции.
+
+
+ Start pocketing at center or boundary
+ Начинать обработку кармана из центра или от границ
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Процент диаметра фрезы для шага на каждом проходе
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Попытки избежать ненужных отходов.
+
+
+ The side of path to insert bones
+ Сторона пути для подрезки углов
+
+
+
+ The style of bones
+ Стиль подрезки углов
+
+
+
+ Bones that aren't dressed up
+ Углы, которые не дополнены \подрезкой\
+
+
+
+ The algorithm to determine the bone length
+ Алгоритм определения длины подрезки
+
+
+
+ Dressup length if Incision == custom
+ Длина дополнительной траектории если разрез == заказанному
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ List of custom property groups
+
The point file from the surface probing.
@@ -806,7 +981,7 @@
Split Arcs into discrete segments
- Split Arcs into discrete segments
+ Разделить дуги на дискретные сегменты
@@ -848,6 +1023,76 @@
The tool used by this controller
Инструмент, используемый этим контроллером
+
+
+ List of disabled features
+ Список отключенных элементов
+
+
+
+ The NC output file for this project
+ Выходной файл УП данного проекта
+
+
+
+ Select the Post Processor
+ Выберите пост процессор
+
+
+
+ Last Time the Job was post-processed
+ Last Time the Job was post-processed
+
+
+
+ An optional description for this job
+ Необязательное описание для этой работы
+
+
+
+ Job Cycle Time Estimation
+ Оценка времени цикла задачи
+
+
+
+ Solid object to be used as stock.
+ Твердый объект для использования в качестве заготовки.
+
+
+
+ Select the Type of Job
+ Выберите тип работы
+
+
+
+ Split output into multiple gcode files
+ Разделить вывод на несколько gcode файлов
+
+
+
+ If multiple WCS, order the output this way
+ Если несколько WCS, закажите вывод таким образом
+
+
+
+ The Work Coordinate Systems for the Job
+ Система рабочих координат для проекта, задания
+
+
+
+ SetupSheet holding the settings for this job
+ УстановочныйЛист содержащий настройки задания
+
+
+
+ The base objects for all operations
+ Базовые объекты для всех операций
+
+
+
+ Collection of all tool controllers for the job
+ Collection of all tool controllers for the job
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
Не удалось найти задачу %s
+
+
+ Illegal arc: Start and end radii not equal
+ Illegal arc: Start and end radii not equal
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
Selected tool is not a drill
-
-
- Illegal arc: Start and end radii not equal
- Illegal arc: Start and end radii not equal
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
ПРЧ
-
-
- List of disabled features
- Список отключенных элементов
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utils
+
+
+ List of disabled features
+ Список отключенных элементов
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Создает путь Дебурр вдоль краев или плоскости, ребра
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Редактирование Доп. траектории технолог. перемычек
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Неподдерживаемый объект заготовки %s
-
-
-
- Unsupported stock type %s (%d)
- Неподдерживаемый тип заготовки %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
Заготовка не цилиндр!
+
+
+ Unsupported stock object %s
+ Неподдерживаемый объект заготовки %s
+
+
+
+ Unsupported stock type %s (%d)
+ Неподдерживаемый тип заготовки %s (%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Твердый объект для использования в качестве заготовки.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Разделить вывод на несколько gcode файлов
-
-
-
- If multiple WCS, order the output this way
- Если несколько WCS, закажите вывод таким образом
-
-
-
- The Work Coordinate Systems for the Job
- Система рабочих координат для проекта, задания
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Collection of all tool controllers for the job
+
+
+ The Work Coordinate Systems for the Job
+ Система рабочих координат для проекта, задания
+
+
+
+ If multiple WCS, order the output this way
+ Если несколько WCS, закажите вывод таким образом
+
+
+
+ Split output into multiple gcode files
+ Разделить вывод на несколько gcode файлов
+
+
+
+ Select the Type of Job
+ Выберите тип работы
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- Базовая геометрия для этой операции
-
-
-
- Holds the calculated value for the StartDepth
- Содержит значение, вычисленное для Стартовой Глубины
-
-
-
- Holds the calculated value for the FinalDepth
- Содержит значение, вычисленное для Финальной глубины
-
-
-
- Holds the diameter of the tool
- Защищаемый, ограничивающий диаметр инструмента
-
-
-
- Holds the max Z value of Stock
- Хранит максимальное значение Z заготовки
-
-
-
- Holds the min Z value of Stock
- Хранит минимальное значение Z заготовки
-
-
-
- Make False, to prevent operation from generating code
- Установите значение в False, чтобы предотвратить генерацию G-кода для операции
-
-
-
- An optional comment for this Operation
- Необязательный комментарий для этой операции
-
-
-
- User Assigned Label
- Пользовательская Метка
-
-
-
- Operations Cycle Time Estimation
- Оценка времени цикла операций
-
-
-
- Base locations for this operation
- Базовое расположение для этой операции
-
-
-
- Coolant mode for this operation
- Режим охлаждения для этой операции
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Начальная глубина инструмента - глубина касания по оси Z
-
-
-
- Final Depth of Tool- lowest value in Z
- Конечная глубина инструмента - нижнее значение по оси Z
-
-
-
- Starting Depth internal use only for derived values
- Начальная глубина внутреннего использования только для расчетных значений
-
-
-
- Incremental Step Down of Tool
- Наращиваемое погружение инструмента
-
-
-
- Maximum material removed on final pass.
- Максимально количество материала снимаемое за последний проход.
-
-
-
- The height needed to clear clamps and obstructions
- Высота для безопасного перемещения над зажимами и прочими приспособлениями
-
-
-
- Rapid Safety Height between locations.
- Безопасная высота быстрого перемещения между позициями.
-
-
-
- The start point of this path
- Начальная точка этого пути
-
-
-
- Make True, if specifying a Start Point
- установить в Истину если указывается начальная точка
-
-
-
- Lower limit of the turning diameter
- Lower limit of the turning diameter
-
-
-
- Upper limit of the turning diameter.
- Upper limit of the turning diameter.
-
-
-
- Coolant option for this operation
- Опция охлаждения для этой операции
-
Edit
@@ -1667,11 +1784,131 @@ If it is necessary to set the FinalDepth manually please select a different oper
Pick Start Point
Указать начальную точку
+
+
+ Make False, to prevent operation from generating code
+ Установите значение в False, чтобы предотвратить генерацию G-кода для операции
+
+
+
+ The base geometry for this operation
+ Базовая геометрия для этой операции
+
+
+
+ Holds the calculated value for the StartDepth
+ Содержит значение, вычисленное для Стартовой Глубины
+
+
+
+ Holds the calculated value for the FinalDepth
+ Содержит значение, вычисленное для Финальной глубины
+
+
+
+ Holds the diameter of the tool
+ Защищаемый, ограничивающий диаметр инструмента
+
+
+
+ Holds the max Z value of Stock
+ Хранит максимальное значение Z заготовки
+
+
+
+ Holds the min Z value of Stock
+ Хранит минимальное значение Z заготовки
+
+
+
+ An optional comment for this Operation
+ Необязательный комментарий для этой операции
+
+
+
+ User Assigned Label
+ Пользовательская Метка
+
+
+
+ Base locations for this operation
+ Базовое расположение для этой операции
+
+
+
+ Coolant mode for this operation
+ Режим охлаждения для этой операции
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Начальная глубина инструмента - глубина касания по оси Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Конечная глубина инструмента - нижнее значение по оси Z
+
+
+
+ Starting Depth internal use only for derived values
+ Начальная глубина внутреннего использования только для расчетных значений
+
+
+
+ Incremental Step Down of Tool
+ Наращиваемое погружение инструмента
+
+
+
+ Maximum material removed on final pass.
+ Максимально количество материала снимаемое за последний проход.
+
+
+
+ The height needed to clear clamps and obstructions
+ Высота для безопасного перемещения над зажимами и прочими приспособлениями
+
+
+
+ Rapid Safety Height between locations.
+ Безопасная высота быстрого перемещения между позициями.
+
+
+
+ The start point of this path
+ Начальная точка этого пути
+
+
+
+ Make True, if specifying a Start Point
+ установить в Истину если указывается начальная точка
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Опция охлаждения для этой операции
+
Job Cycle Time Estimation
Оценка времени цикла задачи
+
+
+ Operations Cycle Time Estimation
+ Оценка времени цикла операций
+
PathPlane
@@ -1734,29 +1971,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Конечная глубина ниже заданного ZMin.
-
- PathPocketShape
-
-
- Default length of extensions.
- Длина по умолчанию для расширений.
-
-
-
- List of features to extend.
- Список элементов для расширения.
-
-
-
- When enabled connected extension edges are combined to wires.
- Если включено соседние ребра расширения объединяются в ломаные (многоточечные) линии.
-
-
-
- Uses the outline of the base geometry.
- Использует контур базовой геометрии.
-
-
PathProfile
@@ -1830,34 +2044,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Для открытых краев проверьте Конечную Глубину для этой операции.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Edit PropertyBag
-
-
-
- Create PropertyBag
- Create PropertyBag
-
-
-
- PropertyBag
- PropertyBag
-
-
-
- Creates an object which can be used to store reference properties.
- Creates an object which can be used to store reference properties.
-
-
-
- List of custom property groups
- List of custom property groups
-
-
PathSlot
@@ -2492,7 +2678,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Clearing
- Clearing
+ Очистка
@@ -2791,7 +2977,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Length/Radius positive not Null
- Length/Radius positive not Null
+ Положительная длина/радиус не ноль
@@ -2884,59 +3070,69 @@ If it is necessary to set the FinalDepth manually please select a different oper
Angle of ramp.
Угол наклона входа.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Спираль
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Дополнительно
+
RampEntry Dress-up
НаклонВхода ДопТраектории
+
+
+ Please select one path object
+ Пожалуйста выберете один объект пути
+
+
+
+ The selected object is not a path
+ Выделенный объект не является путём
+
+
+
+ Please select a Profile object
+ Пожалуйста выберите Профиль объект
+
Path_DressupTag
-
-
- The base path to modify
- Базовый путь для модификации
-
-
-
- Width of tags.
- Ширина технолог. перемычки.
-
-
-
- Height of tags.
- Высота технолог. перемычки.
-
-
-
- Angle of tag plunge and ascent.
- Угол погружения и подъёма технологической перемычки.
-
-
-
- Radius of the fillet for the tag.
- Радиус скругления кромки технологической перемычки.
-
-
-
- Locations of inserted holding tags
- Места вставленных технологических перемычек
-
-
-
- IDs of disabled holding tags
- Идентификаторы отключенных технологических перемычек
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Фактор, определяющий #количество сегментов, используемые для аппроксимации скругленных технологических перемычек.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Невозможно вставить технологические перемычки для этого пути. Пожалуйста, выберите путь профиль
-
The selected object is not a path
@@ -2982,6 +3178,46 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Tag Dress-up
Создать ДопПути техн. перемычка
+
+
+ The base path to modify
+ Базовый путь для модификации
+
+
+
+ Width of tags.
+ Ширина технолог. перемычки.
+
+
+
+ Height of tags.
+ Высота технолог. перемычки.
+
+
+
+ Angle of tag plunge and ascent.
+ Угол погружения и подъёма технологической перемычки.
+
+
+
+ Radius of the fillet for the tag.
+ Радиус скругления кромки технологической перемычки.
+
+
+
+ Locations of inserted holding tags
+ Места вставленных технологических перемычек
+
+
+
+ IDs of disabled holding tags
+ Идентификаторы отключенных технологических перемычек
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Фактор, определяющий #количество сегментов, используемые для аппроксимации скругленных технологических перемычек.
+
No Base object found.
@@ -3002,6 +3238,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Base Path is empty.
Базовый Путь пуст.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Невозможно вставить технологические перемычки для этого пути. Пожалуйста, выберите путь профиль
+
Path_DressupZCorrect
@@ -3095,6 +3336,19 @@ If it is necessary to set the FinalDepth manually please select a different oper
Операции гравировки
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Экспорт шаблона
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Экспортирует Путь Задания в качестве шаблона, который будет использоваться для других заданий
+
+
Path_Helix
@@ -3191,6 +3445,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
Exports Path Job as a template to be used for other jobs
Экспортирует Путь Задания в качестве шаблона, который будет использоваться для других заданий
+
+
+ Edit
+ Редактировать
+
+
+
+ Stock not a cylinder!
+ Заготовка не цилиндр!
+
Edit Job
@@ -3211,6 +3475,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
All Files (*.*)
Все файлы (*.*)
+
+
+ Unsupported stock object %s
+ Неподдерживаемый объект заготовки %s
+
+
+
+ Unsupported stock type %s (%d)
+ Неподдерживаемый тип заготовки %s (%d)
+
Model Selection
@@ -3221,6 +3495,71 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Job
Создать Задание
+
+
+ Fixture
+ Крепление
+
+
+
+ Tool
+ Инструмент
+
+
+
+ Operation
+ Операция
+
+
+
+ 2D
+ Двумерное
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Массивы
+
+
+
+ Jobs
+ Задания
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ База -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Блок: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Цилиндр: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Неподдерживаемый тип заготовки
+
Path_MillFace
@@ -3243,6 +3582,24 @@ If it is necessary to set the FinalDepth manually please select a different oper
Вкл./Выкл. состояние операции
+
+ Path_Operation
+
+
+ None
+ Ничего
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3452,6 +3809,14 @@ If it is necessary to set the FinalDepth manually please select a different oper
Обработать всю модель, выбранные грани или выбранные края
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
@@ -3762,6 +4127,136 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Дополнительно
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ Circular
+ Окружность
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Линия
+
+
+
+ Offset
+ Смещение
+
+
+
+ Spiral
+ Спираль
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Многопроходный
+
+
+
+ None
+ Ничего
+
+
+
+ Only
+ Only
+
+
+
+ First
+ ГОСТ/Европа (First-angle projection)
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Плоский
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -3788,7 +4283,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Metric Internal
- Metric Internal
+ Метрическая внутренняя
@@ -3798,12 +4293,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
LeftHand
- LeftHand
+ Левая Рука
RightHand
- RightHand
+ Правая рука
@@ -4014,6 +4509,183 @@ If it is necessary to set the FinalDepth manually please select a different oper
Создать ватерлинию из модели
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ Эта операция требует установки OpenCamLib.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Дополнительно
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Окружность
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Линия
+
+
+
+ Offset
+ Смещение
+
+
+
+ Spiral
+ Спираль
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ None
+ Ничего
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Многопроходный
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Редактирование Доп. траектории технолог. перемычек
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Длина по умолчанию для расширений.
+
+
+
+ List of features to extend.
+ Список элементов для расширения.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ Если включено соседние ребра расширения объединяются в ломаные (многоточечные) линии.
+
+
+
+ Uses the outline of the base geometry.
+ Использует контур базовой геометрии.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Edit PropertyBag
+
+
+
+ Create PropertyBag
+ Create PropertyBag
+
+
+
+ PropertyBag
+ PropertyBag
+
+
+
+ Creates an object which can be used to store reference properties.
+ Creates an object which can be used to store reference properties.
+
+
+
+ List of custom property groups
+ List of custom property groups
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sl.qm b/src/Mod/Path/Gui/Resources/translations/Path_sl.qm
index 658778d1be..bb669cc240 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_sl.qm and b/src/Mod/Path/Gui/Resources/translations/Path_sl.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sl.ts b/src/Mod/Path/Gui/Resources/translations/Path_sl.ts
index 6d631e67e2..f684831973 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_sl.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_sl.ts
@@ -213,10 +213,20 @@
The Z height of the hop
Višina Z skoka
+
+
+ Default length of extensions.
+ Privzeta dolžina podaljškov.
+
+
+
+ List of features to extend.
+ Seznam značilnosti za podaljšanje.
+
Stop processing
- Stop processing
+ Ustavi izvajanje
@@ -243,6 +253,111 @@
The output location for the probe data to be written
Mesto zapisa meritev tipala
+
+
+ The base geometry for this operation
+ Osnovna geometrija za to opravilo
+
+
+
+ Holds the calculated value for the StartDepth
+ Obdrži izračunano vrednost za ZačetnoGlobino
+
+
+
+ Holds the calculated value for the FinalDepth
+ Obdrži izračunano vrednost za KončnoGlobino
+
+
+
+ Holds the diameter of the tool
+ Zadrži premer orodja
+
+
+
+ Holds the max Z value of Stock
+ Obdrži največjo Z vrednost surovca
+
+
+
+ Holds the min Z value of Stock
+ Obdrži najmanjšo Z vrednost surovca
+
+
+
+ Make False, to prevent operation from generating code
+ Naredi Napak, da se opravilu prepreči ustvarjanje kode
+
+
+
+ An optional comment for this Operation
+ Mogoča opomba za to dejanje
+
+
+
+ User Assigned Label
+ Uporabniško določena oznaka
+
+
+
+ Operations Cycle Time Estimation
+ Ocena časa cikla dejanja
+
+
+
+ Base locations for this operation
+ Osnovni položaji za to opravilo
+
+
+
+ Coolant mode for this operation
+ Hladilni način za to opravilo
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Začetna globina orodja - globina prvega reza v smeri Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Končna globina orodja - najnižja vrednost v smeri Z
+
+
+
+ Incremental Step Down of Tool
+ Dolžina koraka orodja
+
+
+
+ Maximum material removed on final pass.
+ Največja količina odstranjenega materiala pri zaključnem prehodu.
+
+
+
+ Rapid Safety Height between locations.
+ Varnostna višina hitrega prehoda med položaji.
+
+
+
+ The start point of this path
+ Začetna točka te poti
+
+
+
+ Lower limit of the turning diameter
+ Znižaj mejo obračalnega premera
+
+
+
+ Upper limit of the turning diameter.
+ Zgornja meja obračalnega premera.
+
+
+
+ Coolant option for this operation
+ Možnosti hlajenja za to opravilo
+
Additional base objects to be engraved
@@ -256,7 +371,7 @@
Vcarve Tolerance
- Vcarve Tolerance
+ Doputno odstopanje VCarva
@@ -296,12 +411,12 @@
The Style of motion into the Path
- The Style of motion into the Path
+ Slog gibanja v pot (Path)
The Style of motion out of the Path
- The Style of motion out of the Path
+ Slog gibanja iz poti (Path)
@@ -333,11 +448,6 @@
Fixture Offset Number
Število odmika pritrdilnega elementa
-
-
- Make False, to prevent operation from generating code
- Naredi Napak, da se opravilu prepreči ustvarjanje kode
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
Vstavljanje G-kode
+
+
+ Angle of ramp.
+ Naklon klančine.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Podjalna hitrost po meri
+
+
+ Width of tags.
+ Širina mostičkov.
+
+
+
+ Height of tags.
+ Višina mostičkov.
+
+
+
+ Angle of tag plunge and ascent.
+ Kot spusta in vzpona pri mostičku.
+
+
+
+ Radius of the fillet for the tag.
+ Polmer zaokrožitve za mostiček.
+
+
+
+ Locations of inserted holding tags
+ Položaji vstavljenih povezovalnih mostičkov
+
+
+
+ IDs of disabled holding tags
+ Določilniki onemogočenih povezovalnih mostičkov
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Izraz uporabljen za spust pri novih dejanjih.
-
-
- Start pocketing at center or boundary
- Začni dolbsti ugrez na sredini ali robu
-
-
-
- Percent of cutter diameter to step over on each pass
- Zmik pri vsakem prehodu, izražen v deležu premera rezalnika
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Pri opravilih naj se uporabi dodaten odmik. Smer je odvisna od opravila.
+
+
+ Start pocketing at center or boundary
+ Začni dolbsti ugrez na sredini ali robu
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Zmik pri vsakem prehodu, izražen v deležu premera rezalnika
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Poskuša se izogniti nepotrebnim vračanjem.
+
+
+ The side of path to insert bones
+ Stran poti za vstavljanje kosti
+
+
+
+ The style of bones
+ Slog kosti
+
+
+
+ Bones that aren't dressed up
+ Kosti, ki niso oblečene
+
+
+
+ The algorithm to determine the bone length
+ Algoritem za določitev dolžine kosti
+
+
+
+ Dressup length if Incision == custom
+ Dolžina dodelave, če je vrez == po meri
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ Zeznam lastnostnih skupin po meri
+
The point file from the surface probing.
@@ -806,7 +981,7 @@
Split Arcs into discrete segments
- Split Arcs into discrete segments
+ Razcepi loke na samostojne odseke
@@ -848,6 +1023,76 @@
The tool used by this controller
Orodje, ki ga ta krmilnik uporablja
+
+
+ List of disabled features
+ Seznam onemogočenih značilnosti
+
+
+
+ The NC output file for this project
+ Izhodna datoteka NC tega projekta
+
+
+
+ Select the Post Processor
+ Izberi poobdelovalnik
+
+
+
+ Last Time the Job was post-processed
+ Čas zadnje poobdelave opravila
+
+
+
+ An optional description for this job
+ Opis tega opravila po izbiri
+
+
+
+ Job Cycle Time Estimation
+ Ocena časa cikla opravila
+
+
+
+ Solid object to be used as stock.
+ Telo, ki bo uporabljeno kot surovec.
+
+
+
+ Select the Type of Job
+ Izberite vrsto opravila
+
+
+
+ Split output into multiple gcode files
+ Razdeli izhod na več datotek z G-kodo
+
+
+
+ If multiple WCS, order the output this way
+ Če je več SKS-jev, določi izvoz na tak način
+
+
+
+ The Work Coordinate Systems for the Job
+ Svetovni koordinatni sistem (SKS) za opravilo
+
+
+
+ SetupSheet holding the settings for this job
+ Nastavitvenik, ki vsebuje nastavitve za to opravilo
+
+
+
+ The base objects for all operations
+ Osnovni predmet za vsa dejanja
+
+
+
+ Collection of all tool controllers for the job
+ Nabor vseh orodnih krmilnikov za opravilo
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
Ne najde opravila %s
+
+
+ Illegal arc: Start and end radii not equal
+ Nedovoljen lok: Začetni in končni polmer nista enaka
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
Izbrano orodje ni sveder
-
-
- Illegal arc: Start and end radii not equal
- Nedovoljen lok: Začetni in končni polmer nista enaka
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
NSUK, v nasprotni smeri urinega kazalca
-
-
- List of disabled features
- Seznam onemogočenih značilnosti
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Pripomočki
+
+
+ List of disabled features
+ Seznam onemogočenih značilnosti
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Ustvari pot raziglevanje vzdolž robov ali okoli ploskev
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Uredi dodelavo mostičkov
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Nepodprt predmet surovca %s
-
-
-
- Unsupported stock type %s (%d)
- Nepodprta vrsta surovca %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
Surovec ni valj!
+
+
+ Unsupported stock object %s
+ Nepodprt predmet surovca %s
+
+
+
+ Unsupported stock type %s (%d)
+ Nepodprta vrsta surovca %s (%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Telo, ki bo uporabljeno kot surovec.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Razdeli izhod na več datotek z G-kodo
-
-
-
- If multiple WCS, order the output this way
- Če je več SKS-jev, določi izvoz na tak način
-
-
-
- The Work Coordinate Systems for the Job
- Svetovni koordinatni sistem (SKS) za opravilo
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Nabor vseh orodnih krmilnikov za opravilo
+
+
+ The Work Coordinate Systems for the Job
+ Svetovni koordinatni sistem (SKS) za opravilo
+
+
+
+ If multiple WCS, order the output this way
+ Če je več SKS-jev, določi izvoz na tak način
+
+
+
+ Split output into multiple gcode files
+ Razdeli izhod na več datotek z G-kodo
+
+
+
+ Select the Type of Job
+ Izberite vrsto opravila
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- Osnovna geometrija za to opravilo
-
-
-
- Holds the calculated value for the StartDepth
- Obdrži izračunano vrednost za ZačetnoGlobino
-
-
-
- Holds the calculated value for the FinalDepth
- Obdrži izračunano vrednost za KončnoGlobino
-
-
-
- Holds the diameter of the tool
- Zadrži premer orodja
-
-
-
- Holds the max Z value of Stock
- Obdrži največjo Z vrednost surovca
-
-
-
- Holds the min Z value of Stock
- Obdrži najmanjšo Z vrednost surovca
-
-
-
- Make False, to prevent operation from generating code
- Naredi Napak, da se opravilu prepreči ustvarjanje kode
-
-
-
- An optional comment for this Operation
- Mogoča opomba za to dejanje
-
-
-
- User Assigned Label
- Uporabniško določena oznaka
-
-
-
- Operations Cycle Time Estimation
- Ocena časa cikla dejanja
-
-
-
- Base locations for this operation
- Osnovni položaji za to opravilo
-
-
-
- Coolant mode for this operation
- Hladilni način za to opravilo
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Začetna globina orodja - globina prvega reza v smeri Z
-
-
-
- Final Depth of Tool- lowest value in Z
- Končna globina orodja - najnižja vrednost v smeri Z
-
-
-
- Starting Depth internal use only for derived values
- Notranja uporaba Začetne Globine samo za izpeljane vrednosti
-
-
-
- Incremental Step Down of Tool
- Dolžina koraka orodja
-
-
-
- Maximum material removed on final pass.
- Največja količina odstranjenega materiala pri zaključnem prehodu.
-
-
-
- The height needed to clear clamps and obstructions
- Višina, ki je potrebna za izogibanje primeža in ovir
-
-
-
- Rapid Safety Height between locations.
- Varnostna višina hitrega prehoda med položaji.
-
-
-
- The start point of this path
- Začetna točka te poti
-
-
-
- Make True, if specifying a Start Point
- Naredi Resnično, če je določena začetna točka
-
-
-
- Lower limit of the turning diameter
- Znižaj mejo obračalnega premera
-
-
-
- Upper limit of the turning diameter.
- Zgornja meja obračalnega premera.
-
-
-
- Coolant option for this operation
- Možnosti hlajenja za to opravilo
-
Edit
@@ -1668,11 +1785,131 @@ If it is necessary to set the FinalDepth manually please select a different oper
Pick Start Point
Izberite začetno točko
+
+
+ Make False, to prevent operation from generating code
+ Naredi Napak, da se opravilu prepreči ustvarjanje kode
+
+
+
+ The base geometry for this operation
+ Osnovna geometrija za to opravilo
+
+
+
+ Holds the calculated value for the StartDepth
+ Obdrži izračunano vrednost za ZačetnoGlobino
+
+
+
+ Holds the calculated value for the FinalDepth
+ Obdrži izračunano vrednost za KončnoGlobino
+
+
+
+ Holds the diameter of the tool
+ Zadrži premer orodja
+
+
+
+ Holds the max Z value of Stock
+ Obdrži največjo Z vrednost surovca
+
+
+
+ Holds the min Z value of Stock
+ Obdrži najmanjšo Z vrednost surovca
+
+
+
+ An optional comment for this Operation
+ Mogoča opomba za to dejanje
+
+
+
+ User Assigned Label
+ Uporabniško določena oznaka
+
+
+
+ Base locations for this operation
+ Osnovni položaji za to opravilo
+
+
+
+ Coolant mode for this operation
+ Hladilni način za to opravilo
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Začetna globina orodja - globina prvega reza v smeri Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Končna globina orodja - najnižja vrednost v smeri Z
+
+
+
+ Starting Depth internal use only for derived values
+ Notranja uporaba Začetne Globine samo za izpeljane vrednosti
+
+
+
+ Incremental Step Down of Tool
+ Dolžina koraka orodja
+
+
+
+ Maximum material removed on final pass.
+ Največja količina odstranjenega materiala pri zaključnem prehodu.
+
+
+
+ The height needed to clear clamps and obstructions
+ Višina, ki je potrebna za izogibanje primeža in ovir
+
+
+
+ Rapid Safety Height between locations.
+ Varnostna višina hitrega prehoda med položaji.
+
+
+
+ The start point of this path
+ Začetna točka te poti
+
+
+
+ Make True, if specifying a Start Point
+ Naredi Resnično, če je določena začetna točka
+
+
+
+ Lower limit of the turning diameter
+ Znižaj mejo obračalnega premera
+
+
+
+ Upper limit of the turning diameter.
+ Zgornja meja obračalnega premera.
+
+
+
+ Coolant option for this operation
+ Možnosti hlajenja za to opravilo
+
Job Cycle Time Estimation
Ocena časa cikla opravila
+
+
+ Operations Cycle Time Estimation
+ Ocena časa cikla dejanja
+
PathPlane
@@ -1735,29 +1972,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Končna globina je nastavljena pod ZNajm izbrane(ih) ploskve(ev).
-
- PathPocketShape
-
-
- Default length of extensions.
- Privzeta dolžina podaljškov.
-
-
-
- List of features to extend.
- Seznam značilnosti za podaljšanje.
-
-
-
- When enabled connected extension edges are combined to wires.
- Ko je omogočeno, se staknjeni podaljšani robovi združijo v črtovja.
-
-
-
- Uses the outline of the base geometry.
- Uporablja obris osnovne geometrije.
-
-
PathProfile
@@ -1831,34 +2045,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Pri odprtih robovih preveri končno glibino tega dejanja.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Uredi lastnostno vrečo
-
-
-
- Create PropertyBag
- Ustvari lastnostno vrečo
-
-
-
- PropertyBag
- lastnostna vreča
-
-
-
- Creates an object which can be used to store reference properties.
- Ustvari predmet, ki lahko hrani lastnosti sklica.
-
-
-
- List of custom property groups
- Zeznam lastnostnih skupin po meri
-
-
PathSlot
@@ -2331,7 +2517,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Save Tool as...
- Shrani orodje kot ...
+ Shrani orodje kot ...
@@ -2493,12 +2679,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Clearing
- Clearing
+ Čiščenje
Profiling
- Profiling
+ Orisovanje
@@ -2792,7 +2978,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Length/Radius positive not Null
- Length/Radius positive not Null
+ Dolžina/polmer večja od nič
@@ -2885,59 +3071,69 @@ If it is necessary to set the FinalDepth manually please select a different oper
Angle of ramp.
Naklon klančine.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Vijačnica
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Po meri
+
RampEntry Dress-up
Dodelava vstopne klančine
+
+
+ Please select one path object
+ Izberite eno pot
+
+
+
+ The selected object is not a path
+ Izbrani predmet ni pot
+
+
+
+ Please select a Profile object
+ Izberite oris
+
Path_DressupTag
-
-
- The base path to modify
- Osnovna pot za spremembo
-
-
-
- Width of tags.
- Širina mostičkov.
-
-
-
- Height of tags.
- Višina mostičkov.
-
-
-
- Angle of tag plunge and ascent.
- Kot spusta in vzpona pri mostičku.
-
-
-
- Radius of the fillet for the tag.
- Polmer zaokrožitve za mostiček.
-
-
-
- Locations of inserted holding tags
- Položaji vstavljenih povezovalnih mostičkov
-
-
-
- IDs of disabled holding tags
- Določilniki onemogočenih povezovalnih mostičkov
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Količnik, ki določa število odsekov pri približku zaukrožitve mostičkov.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Ni mogoče vstaviti povezovalnih mostičkov za to pot - izberi Profilno pot
-
The selected object is not a path
@@ -2983,6 +3179,46 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Tag Dress-up
Ustvari dodelavo mostičkov
+
+
+ The base path to modify
+ Osnovna pot za spremembo
+
+
+
+ Width of tags.
+ Širina mostičkov.
+
+
+
+ Height of tags.
+ Višina mostičkov.
+
+
+
+ Angle of tag plunge and ascent.
+ Kot spusta in vzpona pri mostičku.
+
+
+
+ Radius of the fillet for the tag.
+ Polmer zaokrožitve za mostiček.
+
+
+
+ Locations of inserted holding tags
+ Položaji vstavljenih povezovalnih mostičkov
+
+
+
+ IDs of disabled holding tags
+ Določilniki onemogočenih povezovalnih mostičkov
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Količnik, ki določa število odsekov pri približku zaukrožitve mostičkov.
+
No Base object found.
@@ -3003,6 +3239,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Base Path is empty.
Pot osnove je prazna.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Ni mogoče vstaviti povezovalnih mostičkov za to pot - izberi Profilno pot
+
Path_DressupZCorrect
@@ -3042,12 +3283,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
G99
- G99
+ G99
G98
- G98
+ G98
@@ -3085,7 +3326,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Creates an Engraving Path around a Draft ShapeString
- Ustvari pot vrezovanja po osnutku besedilne oblike
+ Ustvari pot vrezovanja po izrisovi (Draft) besedilni obliki
@@ -3096,6 +3337,19 @@ If it is necessary to set the FinalDepth manually please select a different oper
Vrezovalna opravila
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Izvozi predlogo
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Izvozi opravilo poti kot predlogo za uporabo pri drugih opravilih
+
+
Path_Helix
@@ -3192,6 +3446,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
Exports Path Job as a template to be used for other jobs
Izvozi opravilo poti kot predlogo za uporabo pri drugih opravilih
+
+
+ Edit
+ Uredi
+
+
+
+ Stock not a cylinder!
+ Surovec ni valj!
+
Edit Job
@@ -3212,6 +3476,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
All Files (*.*)
Vse datoteke (*.*)
+
+
+ Unsupported stock object %s
+ Nepodprt predmet surovca %s
+
+
+
+ Unsupported stock type %s (%d)
+ Nepodprta vrsta surovca %s (%d)
+
Model Selection
@@ -3222,6 +3496,71 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Job
Ustvari opravilo
+
+
+ Fixture
+ Pritrdilo
+
+
+
+ Tool
+ Orodje
+
+
+
+ Operation
+ Dejanje
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Telesa
+
+
+
+ Jobs
+ Opravila
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Osnova -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Kvader: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Valj: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Nepodprta vrsta surovca
+
Path_MillFace
@@ -3244,6 +3583,24 @@ If it is necessary to set the FinalDepth manually please select a different oper
Preklopi dejavnost dejanja
+
+ Path_Operation
+
+
+ None
+ Brez
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3453,6 +3810,14 @@ If it is necessary to set the FinalDepth manually please select a different oper
Oriši celoten model, izbrane ploskve ali izbrane robove
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ lastnostna vreča
+
+
Path_Sanity
@@ -3763,6 +4128,136 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Surface
+
+
+ BaseBoundBox
+ Mejni kvader osnove
+
+
+
+ Stock
+ Surovec
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Po meri
+
+
+
+ Conventional
+ Običajen
+
+
+
+ Climb
+ Climb
+
+
+
+ Circular
+ Okrogel
+
+
+
+ CircularZigZag
+ Krožni cikcak
+
+
+
+ Line
+ Črta
+
+
+
+ Offset
+ Odmik
+
+
+
+ Spiral
+ Viba
+
+
+
+ ZigZag
+ Cikcak
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Skupno
+
+
+
+ Individually
+ Posamično
+
+
+
+ Single-pass
+ Enoprehodno
+
+
+
+ Multi-pass
+ Večprehodno
+
+
+
+ None
+ Brez
+
+
+
+ Only
+ Le
+
+
+
+ First
+ Evropski
+
+
+
+ Last
+ Zadnje
+
+
+
+ Planar
+ Ravninsko
+
+
+
+ Rotational
+ Sukajoče
+
3D Surface
@@ -3789,22 +4284,22 @@ If it is necessary to set the FinalDepth manually please select a different oper
Metric Internal
- Metric Internal
+ Metrični notranji
Imperial Internal
- Imperial Internal
+ Anglosaški notranji
LeftHand
- LeftHand
+ Levosučno
RightHand
- RightHand
+ Desnosučno
@@ -3910,7 +4405,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Save Tool as...
- Shrani orodje kot ...
+ Shrani orodje kot ...
@@ -4015,6 +4510,183 @@ If it is necessary to set the FinalDepth manually please select a different oper
Iz oblikovanca ustvari dejanje vodne črte
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ Za to dejanje mora biti nameščena OpenCamLib.
+
+
+
+ OCL Dropcutter
+ OCL spustno rezkanje
+
+
+
+ Experimental
+ Delavna različica
+
+
+
+ BaseBoundBox
+ Mejni kvader osnove
+
+
+
+ Stock
+ Surovec
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Po meri
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Okrogel
+
+
+
+ CircularZigZag
+ Krožni cikcak
+
+
+
+ Line
+ Črta
+
+
+
+ Offset
+ Odmik
+
+
+
+ Spiral
+ Viba
+
+
+
+ ZigZag
+ Cikcak
+
+
+
+ Conventional
+ Običajen
+
+
+
+ Climb
+ Climb
+
+
+
+ None
+ Brez
+
+
+
+ Collectively
+ Skupno
+
+
+
+ Individually
+ Posamično
+
+
+
+ Single-pass
+ Enoprehodno
+
+
+
+ Multi-pass
+ Večprehodno
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Uredi dodelavo mostičkov
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Privzeta dolžina podaljškov.
+
+
+
+ List of features to extend.
+ Seznam značilnosti za podaljšanje.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ Ko je omogočeno, se staknjeni podaljšani robovi združijo v črtovja.
+
+
+
+ Uses the outline of the base geometry.
+ Uporablja obris osnovne geometrije.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Uredi lastnostno vrečo
+
+
+
+ Create PropertyBag
+ Ustvari lastnostno vrečo
+
+
+
+ PropertyBag
+ lastnostna vreča
+
+
+
+ Creates an object which can be used to store reference properties.
+ Ustvari predmet, ki lahko hrani lastnosti sklica.
+
+
+
+ List of custom property groups
+ Zeznam lastnostnih skupin po meri
+
+
PathEngrave
@@ -4025,7 +4697,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Creates an Engraving Path around a Draft ShapeString
- Ustvari pot vrezovanja po osnutku besedilne oblike
+ Ustvari pot vrezovanja po izrisovi (Draft) besedilni obliki
@@ -6499,12 +7171,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Modify...
- Spremeni ...
+ Spremeni ...
Add...
- Dodaj ...
+ Dodaj ...
@@ -7452,7 +8124,7 @@ p, li { white-space: pre-wrap; }
<html><head/><body><p>Distance the point trails behind the spindle</p></body></html>
- <html><head/><body><p>Oddaljenost, kateri točka sledi vretenu</p></body></html>
+ <html><head/><body><p>Oddaljenost, na kateri točka sledi vretenu</p></body></html>
@@ -7580,7 +8252,7 @@ p, li { white-space: pre-wrap; }
Add...
- Dodaj ...
+ Dodaj ...
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.qm b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.qm
index 1b116e7e9d..9f34e50094 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.qm and b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts
index ba7800f4b9..17e07725dc 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts
@@ -213,6 +213,16 @@
The Z height of the hop
The Z height of the hop
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ Lista över funktioner att förlänga.
+
Stop processing
@@ -243,6 +253,111 @@
The output location for the probe data to be written
Utdataplatsen för avsökningsdata som ska skrivas
+
+
+ The base geometry for this operation
+ Basgeometrin för denna operation
+
+
+
+ Holds the calculated value for the StartDepth
+ Holds the calculated value for the StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Holds the calculated value for the FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Håller diametern på verktyget
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ Make False, to prevent operation from generating code
+ Make False, to prevent operation from generating code
+
+
+
+ An optional comment for this Operation
+ En valfri kommentar för denna Operation
+
+
+
+ User Assigned Label
+ Användartilldelad etikett
+
+
+
+ Operations Cycle Time Estimation
+ Tidsuppskattning för cykeltid
+
+
+
+ Base locations for this operation
+ Basplatser för den här åtgärden
+
+
+
+ Coolant mode for this operation
+ Kylvätskeläge för denna åtgärd
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Starting Depth of Tool- first cut depth in Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Final Depth of Tool- lowest value in Z
+
+
+
+ Incremental Step Down of Tool
+ Incremental Step Down of Tool
+
+
+
+ Maximum material removed on final pass.
+ Maximum material removed on final pass.
+
+
+
+ Rapid Safety Height between locations.
+ Rapid Safety Height mellan platser.
+
+
+
+ The start point of this path
+ The start point of this path
+
+
+
+ Lower limit of the turning diameter
+ Lägre gräns för svarvdiametern
+
+
+
+ Upper limit of the turning diameter.
+ Övre gräns för svarvdiameter.
+
+
+
+ Coolant option for this operation
+ Kylvätskealternativ för denna operation
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
Fixture Offset Number
-
-
- Make False, to prevent operation from generating code
- Make False, to prevent operation from generating code
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
Den gcode som ska sättas in
+
+
+ Angle of ramp.
+ Angle of ramp.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Anpassad matningshastighet
+
+
+ Width of tags.
+ Width of tags.
+
+
+
+ Height of tags.
+ Höjd på taggar.
+
+
+
+ Angle of tag plunge and ascent.
+ Angle of tag plunge and ascent.
+
+
+
+ Radius of the fillet for the tag.
+ Radius of the fillet for the tag.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expression used for StepDown of new operations.
-
-
- Start pocketing at center or boundary
- Start pocketing at center or boundary
-
-
-
- Percent of cutter diameter to step over on each pass
- Procent av fräsdiametern för att kliva över på varje pass
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Extra förskjutning att gälla för operationen. Riktning är driftberoende.
+
+
+ Start pocketing at center or boundary
+ Start pocketing at center or boundary
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Procent av fräsdiametern för att kliva över på varje pass
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Försök att undvika onödiga upprullningar.
+
+
+ The side of path to insert bones
+ The side of path to insert bones
+
+
+
+ The style of bones
+ The style of bones
+
+
+
+ Bones that aren't dressed up
+ Bones that aren't dressed up
+
+
+
+ The algorithm to determine the bone length
+ The algorithm to determine the bone length
+
+
+
+ Dressup length if Incision == custom
+ Dressup length if Incision == custom
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ List of custom property groups
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
Verktyget som används av den här styrenheten
+
+
+ List of disabled features
+ Lista över inaktiverade funktioner
+
+
+
+ The NC output file for this project
+ The NC output file for this project
+
+
+
+ Select the Post Processor
+ Välj Postprocessorn
+
+
+
+ Last Time the Job was post-processed
+ Last Time the Job was post-processed
+
+
+
+ An optional description for this job
+ An optional description for this job
+
+
+
+ Job Cycle Time Estimation
+ Uppskattning av jobbcykeltid
+
+
+
+ Solid object to be used as stock.
+ Solid object to be used as stock.
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ SetupSheet holding the settings for this job
+ SetupSheet holding the settings for this job
+
+
+
+ The base objects for all operations
+ The base objects for all operations
+
+
+
+ Collection of all tool controllers for the job
+ Collection of all tool controllers for the job
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
Hittade inte jobb %s
+
+
+ Illegal arc: Start and end radii not equal
+ Olaglig båge: Start och radier inte lika
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
Selected tool is not a drill
-
-
- Illegal arc: Start and end radii not equal
- Olaglig båge: Start och radier inte lika
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
CCW
-
-
- List of disabled features
- Lista över inaktiverade funktioner
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utils
+
+
+ List of disabled features
+ Lista över inaktiverade funktioner
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Skapar en verktygsväg för avgradning längs kanter eller runt ytor
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Edit HoldingTags Dress-up
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Unsupported stock object %s
-
-
-
- Unsupported stock type %s (%d)
- Unsupported stock type %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
Stock not a cylinder!
+
+
+ Unsupported stock object %s
+ Unsupported stock object %s
+
+
+
+ Unsupported stock type %s (%d)
+ Unsupported stock type %s (%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Solid object to be used as stock.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Split output into multiple gcode files
-
-
-
- If multiple WCS, order the output this way
- If multiple WCS, order the output this way
-
-
-
- The Work Coordinate Systems for the Job
- The Work Coordinate Systems for the Job
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Collection of all tool controllers for the job
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- Basgeometrin för denna operation
-
-
-
- Holds the calculated value for the StartDepth
- Holds the calculated value for the StartDepth
-
-
-
- Holds the calculated value for the FinalDepth
- Holds the calculated value for the FinalDepth
-
-
-
- Holds the diameter of the tool
- Håller diametern på verktyget
-
-
-
- Holds the max Z value of Stock
- Holds the max Z value of Stock
-
-
-
- Holds the min Z value of Stock
- Holds the min Z value of Stock
-
-
-
- Make False, to prevent operation from generating code
- Make False, to prevent operation from generating code
-
-
-
- An optional comment for this Operation
- En valfri kommentar för denna Operation
-
-
-
- User Assigned Label
- Användartilldelad etikett
-
-
-
- Operations Cycle Time Estimation
- Tidsuppskattning för cykeltid
-
-
-
- Base locations for this operation
- Basplatser för den här åtgärden
-
-
-
- Coolant mode for this operation
- Kylvätskeläge för denna åtgärd
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Starting Depth of Tool- first cut depth in Z
-
-
-
- Final Depth of Tool- lowest value in Z
- Final Depth of Tool- lowest value in Z
-
-
-
- Starting Depth internal use only for derived values
- Starting Depth internal use only for derived values
-
-
-
- Incremental Step Down of Tool
- Incremental Step Down of Tool
-
-
-
- Maximum material removed on final pass.
- Maximum material removed on final pass.
-
-
-
- The height needed to clear clamps and obstructions
- The height needed to clear clamps and obstructions
-
-
-
- Rapid Safety Height between locations.
- Rapid Safety Height mellan platser.
-
-
-
- The start point of this path
- The start point of this path
-
-
-
- Make True, if specifying a Start Point
- Make True, if specifying a Start Point
-
-
-
- Lower limit of the turning diameter
- Lägre gräns för svarvdiametern
-
-
-
- Upper limit of the turning diameter.
- Övre gräns för svarvdiameter.
-
-
-
- Coolant option for this operation
- Kylvätskealternativ för denna operation
-
Edit
@@ -1668,11 +1785,131 @@ If it is necessary to set the FinalDepth manually please select a different oper
Pick Start Point
Välj startpunkt
+
+
+ Make False, to prevent operation from generating code
+ Make False, to prevent operation from generating code
+
+
+
+ The base geometry for this operation
+ Basgeometrin för denna operation
+
+
+
+ Holds the calculated value for the StartDepth
+ Holds the calculated value for the StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Holds the calculated value for the FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Håller diametern på verktyget
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ An optional comment for this Operation
+ En valfri kommentar för denna Operation
+
+
+
+ User Assigned Label
+ Användartilldelad etikett
+
+
+
+ Base locations for this operation
+ Basplatser för den här åtgärden
+
+
+
+ Coolant mode for this operation
+ Kylvätskeläge för denna åtgärd
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Starting Depth of Tool- first cut depth in Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Final Depth of Tool- lowest value in Z
+
+
+
+ Starting Depth internal use only for derived values
+ Starting Depth internal use only for derived values
+
+
+
+ Incremental Step Down of Tool
+ Incremental Step Down of Tool
+
+
+
+ Maximum material removed on final pass.
+ Maximum material removed on final pass.
+
+
+
+ The height needed to clear clamps and obstructions
+ The height needed to clear clamps and obstructions
+
+
+
+ Rapid Safety Height between locations.
+ Rapid Safety Height mellan platser.
+
+
+
+ The start point of this path
+ The start point of this path
+
+
+
+ Make True, if specifying a Start Point
+ Make True, if specifying a Start Point
+
+
+
+ Lower limit of the turning diameter
+ Lägre gräns för svarvdiametern
+
+
+
+ Upper limit of the turning diameter.
+ Övre gräns för svarvdiameter.
+
+
+
+ Coolant option for this operation
+ Kylvätskealternativ för denna operation
+
Job Cycle Time Estimation
Uppskattning av jobbcykeltid
+
+
+ Operations Cycle Time Estimation
+ Tidsuppskattning för cykeltid
+
PathPlane
@@ -1735,29 +1972,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Final depth set below ZMin of face(s) selected.
-
- PathPocketShape
-
-
- Default length of extensions.
- Default length of extensions.
-
-
-
- List of features to extend.
- Lista över funktioner att förlänga.
-
-
-
- When enabled connected extension edges are combined to wires.
- When enabled connected extension edges are combined to wires.
-
-
-
- Uses the outline of the base geometry.
- Använder konturerna av basgeometrin.
-
-
PathProfile
@@ -1831,34 +2045,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
For open edges, verify Final Depth for this operation.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Edit PropertyBag
-
-
-
- Create PropertyBag
- Create PropertyBag
-
-
-
- PropertyBag
- PropertyBag
-
-
-
- Creates an object which can be used to store reference properties.
- Creates an object which can be used to store reference properties.
-
-
-
- List of custom property groups
- List of custom property groups
-
-
PathSlot
@@ -2885,59 +3071,69 @@ If it is necessary to set the FinalDepth manually please select a different oper
Angle of ramp.
Angle of ramp.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Helix
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Anpassad
+
RampEntry Dress-up
RampEntry Dress-up
+
+
+ Please select one path object
+ Please select one path object
+
+
+
+ The selected object is not a path
+ The selected object is not a path
+
+
+
+ Please select a Profile object
+ Please select a Profile object
+
Path_DressupTag
-
-
- The base path to modify
- The base path to modify
-
-
-
- Width of tags.
- Width of tags.
-
-
-
- Height of tags.
- Höjd på taggar.
-
-
-
- Angle of tag plunge and ascent.
- Angle of tag plunge and ascent.
-
-
-
- Radius of the fillet for the tag.
- Radius of the fillet for the tag.
-
-
-
- Locations of inserted holding tags
- Locations of inserted holding tags
-
-
-
- IDs of disabled holding tags
- IDs of disabled holding tags
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Factor determining the # of segments used to approximate rounded tags.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Cannot insert holding tags for this path - please select a Profile path
-
The selected object is not a path
@@ -2983,6 +3179,46 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Tag Dress-up
Create Tag Dress-up
+
+
+ The base path to modify
+ The base path to modify
+
+
+
+ Width of tags.
+ Width of tags.
+
+
+
+ Height of tags.
+ Höjd på taggar.
+
+
+
+ Angle of tag plunge and ascent.
+ Angle of tag plunge and ascent.
+
+
+
+ Radius of the fillet for the tag.
+ Radius of the fillet for the tag.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Factor determining the # of segments used to approximate rounded tags.
+
No Base object found.
@@ -3003,6 +3239,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Base Path is empty.
Base Path is empty.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Cannot insert holding tags for this path - please select a Profile path
+
Path_DressupZCorrect
@@ -3096,6 +3337,19 @@ If it is necessary to set the FinalDepth manually please select a different oper
Gravyroperationer
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Exportera mall
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Exports Path Job as a template to be used for other jobs
+
+
Path_Helix
@@ -3192,6 +3446,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
Exports Path Job as a template to be used for other jobs
Exports Path Job as a template to be used for other jobs
+
+
+ Edit
+ Redigera
+
+
+
+ Stock not a cylinder!
+ Stock not a cylinder!
+
Edit Job
@@ -3212,6 +3476,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
All Files (*.*)
Alla filer (*.*)
+
+
+ Unsupported stock object %s
+ Unsupported stock object %s
+
+
+
+ Unsupported stock type %s (%d)
+ Unsupported stock type %s (%d)
+
Model Selection
@@ -3222,6 +3496,71 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Job
Skapa jobb
+
+
+ Fixture
+ Fixtur
+
+
+
+ Tool
+ Verktyg
+
+
+
+ Operation
+ Operation
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Solider
+
+
+
+ Jobs
+ Jobb
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Box: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Cylinder: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Unsupported stock type
+
Path_MillFace
@@ -3244,6 +3583,24 @@ If it is necessary to set the FinalDepth manually please select a different oper
Toggle the Active State of the Operation
+
+ Path_Operation
+
+
+ None
+ Inget
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3453,6 +3810,14 @@ If it is necessary to set the FinalDepth manually please select a different oper
Profilera hela modellen, valda ytor eller valda kanter
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
@@ -3763,6 +4128,136 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Anpassad
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ Circular
+ Cirkulärt
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Linje
+
+
+
+ Offset
+ Offset
+
+
+
+ Spiral
+ Spiral
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Kollektivt
+
+
+
+ Individually
+ Individuellt
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ None
+ Inget
+
+
+
+ Only
+ Bara
+
+
+
+ First
+ Första
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Planär
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -4015,6 +4510,183 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create a Waterline Operation from a model
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ This operation requires OpenCamLib to be installed.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimentell
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Anpassad
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Cirkulärt
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Linje
+
+
+
+ Offset
+ Offset
+
+
+
+ Spiral
+ Spiral
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ None
+ Inget
+
+
+
+ Collectively
+ Kollektivt
+
+
+
+ Individually
+ Individuellt
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Edit HoldingTags Dress-up
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ Lista över funktioner att förlänga.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ When enabled connected extension edges are combined to wires.
+
+
+
+ Uses the outline of the base geometry.
+ Använder konturerna av basgeometrin.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Edit PropertyBag
+
+
+
+ Create PropertyBag
+ Create PropertyBag
+
+
+
+ PropertyBag
+ PropertyBag
+
+
+
+ Creates an object which can be used to store reference properties.
+ Creates an object which can be used to store reference properties.
+
+
+
+ List of custom property groups
+ List of custom property groups
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_tr.qm b/src/Mod/Path/Gui/Resources/translations/Path_tr.qm
index 993902cc7c..9b7aa3eb1d 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_tr.qm and b/src/Mod/Path/Gui/Resources/translations/Path_tr.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_tr.ts b/src/Mod/Path/Gui/Resources/translations/Path_tr.ts
index 864f200aaf..24b855b43a 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_tr.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_tr.ts
@@ -213,6 +213,16 @@
The Z height of the hop
Atlamanın Z yüksekliği
+
+
+ Default length of extensions.
+ Uzantılar için varsayılan uzunluk.
+
+
+
+ List of features to extend.
+ Uzatılacak özelliklerin listesi.
+
Stop processing
@@ -243,6 +253,111 @@
The output location for the probe data to be written
Yazılacak prob verileri için çıktı konumu
+
+
+ The base geometry for this operation
+ Bu işlem için taban geometrisi
+
+
+
+ Holds the calculated value for the StartDepth
+ StartDepth için hesaplanan değeri
+
+
+
+ Holds the calculated value for the FinalDepth
+ StartDepth için hesaplanan değeri
+
+
+
+ Holds the diameter of the tool
+ Takım çapını tutar
+
+
+
+ Holds the max Z value of Stock
+ Malzemenin en büyük Z değerini tutar
+
+
+
+ Holds the min Z value of Stock
+ Mevcudun en küçük Z değerini tutar
+
+
+
+ Make False, to prevent operation from generating code
+ İşlemin kod üretmesini önlemek için Yanlış yapın
+
+
+
+ An optional comment for this Operation
+ Bu İşlem için isteğe bağlı bir açıklama
+
+
+
+ User Assigned Label
+ Kullanıcı atanan etiket
+
+
+
+ Operations Cycle Time Estimation
+ İşlemler Döngü Süresi Tahmini
+
+
+
+ Base locations for this operation
+ Bu işlem için temel konumlar
+
+
+
+ Coolant mode for this operation
+ Bu işlem için soğutucu kipi
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Derinlik, aracı ilk başlangıç derinlik z. kesmek
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Son Alet Derinliği - Z'deki en düşük değer
+
+
+
+ Incremental Step Down of Tool
+ Aracı artımlı adım aşağı
+
+
+
+ Maximum material removed on final pass.
+ Maksimum malzeme final geçişte kaldırıldı.
+
+
+
+ Rapid Safety Height between locations.
+ Konumlar arasında Rapid Emniyet Yüksekliği.
+
+
+
+ The start point of this path
+ Bu yolun başlangıç noktası
+
+
+
+ Lower limit of the turning diameter
+ Torna çapının alt sınırı
+
+
+
+ Upper limit of the turning diameter.
+ Torna çapının üst sınırı.
+
+
+
+ Coolant option for this operation
+ Bu işlem için soğutucu seçeneği
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
Fikstür Ofset Numarası
-
-
- Make False, to prevent operation from generating code
- İşlemin kod üretmesini önlemek için Yanlış yapın
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
Eklenecek gcode
+
+
+ Angle of ramp.
+ Rampa açısı.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Özel ilerleme hızı
+
+
+ Width of tags.
+ Etiket genişliği.
+
+
+
+ Height of tags.
+ Satır yüksekliği.
+
+
+
+ Angle of tag plunge and ascent.
+ Etiket Dalma ve yükselme açısı.
+
+
+
+ Radius of the fillet for the tag.
+ Etiketi için köşe yarıçapı.
+
+
+
+ Locations of inserted holding tags
+ Yerleştirilen tutma etiketlerinin bulunduğu yerler
+
+
+
+ IDs of disabled holding tags
+ Devre dışı bırakılan tutma etiketlerinin kimlikleri
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Yeni işlemlerde Adım Azaltma için kullanılan ifade.
-
-
- Start pocketing at center or boundary
- Merkezi veya sınır cebe başlatmak
-
-
-
- Percent of cutter diameter to step over on each pass
- Her geçide adım atacak kesici çapı yüzdesi
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
İşlem için uygulanacak ekstra ofset. Yön operasyona bağlıdır.
+
+
+ Start pocketing at center or boundary
+ Merkezi veya sınır cebe başlatmak
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Her geçide adım atacak kesici çapı yüzdesi
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Takımı gereksiz geri çekmelere karşı sizi uyarır.
+
+
+ The side of path to insert bones
+ Kemik eklemek için yol tarafında
+
+
+
+ The style of bones
+ İskelet Biçimi
+
+
+
+ Bones that aren't dressed up
+ Giyinik değilsin kemikler
+
+
+
+ The algorithm to determine the bone length
+ Kemik uzunluğu belirlemek için kullanılan algoritma
+
+
+
+ Dressup length if Incision == custom
+ Dressup uzunluğu Eğer kesi özel ==
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Titreşim rastgeleliği için besleme değeri
+
+
+ List of custom property groups
+ Özel özellik gruplarının listesi
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
Bu denetleyici tarafından kullanılan araç
+
+
+ List of disabled features
+ Etkin olmayan ürünlerin listesi
+
+
+
+ The NC output file for this project
+ Bu proje için NC çıktı dosyası
+
+
+
+ Select the Post Processor
+ İşlem Sonucu Seçme
+
+
+
+ Last Time the Job was post-processed
+ İşin en son işlendiği zaman
+
+
+
+ An optional description for this job
+ Bu iş için isteğe bağlı bir açıklama
+
+
+
+ Job Cycle Time Estimation
+ İş Döngü Süresi Tahmini
+
+
+
+ Solid object to be used as stock.
+ Stok olarak kullanılmak üzere katı bir nesne.
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ İş Çıktısını birden fazla gcade dosyasına ayır
+
+
+
+ If multiple WCS, order the output this way
+ Birden fazla WCS varsa, çıktıyı bu şekilde sıralayın
+
+
+
+ The Work Coordinate Systems for the Job
+ İş için Çalışma Koordinat Sistemleri
+
+
+
+ SetupSheet holding the settings for this job
+ Bu iş için ayarları tutan SetupSheet
+
+
+
+ The base objects for all operations
+ Tüm işlemler için temel nesneler
+
+
+
+ Collection of all tool controllers for the job
+ İş için tüm alet kontrolörlerinin toplanması
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
İş %s bulamadım
+
+
+ Illegal arc: Start and end radii not equal
+ Geçersiz yay: Başlangıç ve bitiş yarıçapları eşit değil
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
Seçilen araç bir matkap ucu değil
-
-
- Illegal arc: Start and end radii not equal
- Geçersiz yay: Başlangıç ve bitiş yarıçapları eşit değil
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
Saat Yönünün Tersi
-
-
- List of disabled features
- Etkin olmayan ürünlerin listesi
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Yardımcılar
+
+
+ List of disabled features
+ Etkin olmayan ürünlerin listesi
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Kenarlar boyunca veya Yüzler etrafında Çapak Alma Yolu oluşturur
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- HoldingTags Dress-up'ı düzenleme
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Desteklenmeyen stok nesnesi %s
-
-
-
- Unsupported stock type %s (%d)
- Desteklenmeyen stok türü %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
Stok bir silindir değil!
+
+
+ Unsupported stock object %s
+ Desteklenmeyen stok nesnesi %s
+
+
+
+ Unsupported stock type %s (%d)
+ Desteklenmeyen stok türü %s (%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Stok olarak kullanılmak üzere katı bir nesne.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- İş Çıktısını birden fazla gcade dosyasına ayır
-
-
-
- If multiple WCS, order the output this way
- Birden fazla WCS varsa, çıktıyı bu şekilde sıralayın
-
-
-
- The Work Coordinate Systems for the Job
- İş için Çalışma Koordinat Sistemleri
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
İş için tüm alet kontrolörlerinin toplanması
+
+
+ The Work Coordinate Systems for the Job
+ İş için Çalışma Koordinat Sistemleri
+
+
+
+ If multiple WCS, order the output this way
+ Birden fazla WCS varsa, çıktıyı bu şekilde sıralayın
+
+
+
+ Split output into multiple gcode files
+ İş Çıktısını birden fazla gcade dosyasına ayır
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- Bu işlem için taban geometrisi
-
-
-
- Holds the calculated value for the StartDepth
- StartDepth için hesaplanan değeri
-
-
-
- Holds the calculated value for the FinalDepth
- StartDepth için hesaplanan değeri
-
-
-
- Holds the diameter of the tool
- Takım çapını tutar
-
-
-
- Holds the max Z value of Stock
- Malzemenin en büyük Z değerini tutar
-
-
-
- Holds the min Z value of Stock
- Mevcudun en küçük Z değerini tutar
-
-
-
- Make False, to prevent operation from generating code
- İşlemin kod üretmesini önlemek için Yanlış yapın
-
-
-
- An optional comment for this Operation
- Bu İşlem için isteğe bağlı bir açıklama
-
-
-
- User Assigned Label
- Kullanıcı atanan etiket
-
-
-
- Operations Cycle Time Estimation
- İşlemler Döngü Süresi Tahmini
-
-
-
- Base locations for this operation
- Bu işlem için temel konumlar
-
-
-
- Coolant mode for this operation
- Bu işlem için soğutucu kipi
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Derinlik, aracı ilk başlangıç derinlik z. kesmek
-
-
-
- Final Depth of Tool- lowest value in Z
- Son Alet Derinliği - Z'deki en düşük değer
-
-
-
- Starting Depth internal use only for derived values
- Dahili başlangıç derinliğini yalnız türetilmiş değerler için kullan
-
-
-
- Incremental Step Down of Tool
- Aracı artımlı adım aşağı
-
-
-
- Maximum material removed on final pass.
- Maksimum malzeme final geçişte kaldırıldı.
-
-
-
- The height needed to clear clamps and obstructions
- Kelepçeler ve engelleri temizlemek için gerekli yükseklik
-
-
-
- Rapid Safety Height between locations.
- Konumlar arasında Rapid Emniyet Yüksekliği.
-
-
-
- The start point of this path
- Bu yolun başlangıç noktası
-
-
-
- Make True, if specifying a Start Point
- Bir Başlama Noktası belirtirken Doğru yapın
-
-
-
- Lower limit of the turning diameter
- Torna çapının alt sınırı
-
-
-
- Upper limit of the turning diameter.
- Torna çapının üst sınırı.
-
-
-
- Coolant option for this operation
- Bu işlem için soğutucu seçeneği
-
Edit
@@ -1668,11 +1785,131 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se
Pick Start Point
Hedef noktası seç
+
+
+ Make False, to prevent operation from generating code
+ İşlemin kod üretmesini önlemek için Yanlış yapın
+
+
+
+ The base geometry for this operation
+ Bu işlem için taban geometrisi
+
+
+
+ Holds the calculated value for the StartDepth
+ StartDepth için hesaplanan değeri
+
+
+
+ Holds the calculated value for the FinalDepth
+ StartDepth için hesaplanan değeri
+
+
+
+ Holds the diameter of the tool
+ Takım çapını tutar
+
+
+
+ Holds the max Z value of Stock
+ Malzemenin en büyük Z değerini tutar
+
+
+
+ Holds the min Z value of Stock
+ Mevcudun en küçük Z değerini tutar
+
+
+
+ An optional comment for this Operation
+ Bu İşlem için isteğe bağlı bir açıklama
+
+
+
+ User Assigned Label
+ Kullanıcı atanan etiket
+
+
+
+ Base locations for this operation
+ Bu işlem için temel konumlar
+
+
+
+ Coolant mode for this operation
+ Bu işlem için soğutucu kipi
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Derinlik, aracı ilk başlangıç derinlik z. kesmek
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Son Alet Derinliği - Z'deki en düşük değer
+
+
+
+ Starting Depth internal use only for derived values
+ Dahili başlangıç derinliğini yalnız türetilmiş değerler için kullan
+
+
+
+ Incremental Step Down of Tool
+ Aracı artımlı adım aşağı
+
+
+
+ Maximum material removed on final pass.
+ Maksimum malzeme final geçişte kaldırıldı.
+
+
+
+ The height needed to clear clamps and obstructions
+ Kelepçeler ve engelleri temizlemek için gerekli yükseklik
+
+
+
+ Rapid Safety Height between locations.
+ Konumlar arasında Rapid Emniyet Yüksekliği.
+
+
+
+ The start point of this path
+ Bu yolun başlangıç noktası
+
+
+
+ Make True, if specifying a Start Point
+ Bir Başlama Noktası belirtirken Doğru yapın
+
+
+
+ Lower limit of the turning diameter
+ Torna çapının alt sınırı
+
+
+
+ Upper limit of the turning diameter.
+ Torna çapının üst sınırı.
+
+
+
+ Coolant option for this operation
+ Bu işlem için soğutucu seçeneği
+
Job Cycle Time Estimation
İş Döngü Süresi Tahmini
+
+
+ Operations Cycle Time Estimation
+ İşlemler Döngü Süresi Tahmini
+
PathPlane
@@ -1735,29 +1972,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se
Son derinliği, seçili yüz(ler) in Zmin değeri altına ayarla.
-
- PathPocketShape
-
-
- Default length of extensions.
- Uzantılar için varsayılan uzunluk.
-
-
-
- List of features to extend.
- Uzatılacak özelliklerin listesi.
-
-
-
- When enabled connected extension edges are combined to wires.
- Etkinleştirildiğinde, bağlantılı uzatma kenarları kablolarla birleştirilir.
-
-
-
- Uses the outline of the base geometry.
- Ana geometri için dış çizgiyi kullan.
-
-
PathProfile
@@ -1831,34 +2045,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se
Açık kenarlar için, bu işlemin Bitiş Derinliğini doğrula.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- ÖzellikÇantasını Düzenle
-
-
-
- Create PropertyBag
- ÖzellikÇantası Oluştur
-
-
-
- PropertyBag
- ÖzellikÇantası
-
-
-
- Creates an object which can be used to store reference properties.
- Referans özelliklerini saklamak için kullanılabilecek bir nesne oluşturur.
-
-
-
- List of custom property groups
- Özel özellik gruplarının listesi
-
-
PathSlot
@@ -2885,59 +3071,69 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se
Angle of ramp.
Rampa açısı.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Helis
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Özel
+
RampEntry Dress-up
Rampa Girişleri Giydirme
+
+
+ Please select one path object
+ Lütfen bir yol nesnesi seçin
+
+
+
+ The selected object is not a path
+ Seçilen nesne bir yol değil
+
+
+
+ Please select a Profile object
+ Lütfen temel bir nesne seçin
+
Path_DressupTag
-
-
- The base path to modify
- Değiştirilecek taban yolu
-
-
-
- Width of tags.
- Etiket genişliği.
-
-
-
- Height of tags.
- Satır yüksekliği.
-
-
-
- Angle of tag plunge and ascent.
- Etiket Dalma ve yükselme açısı.
-
-
-
- Radius of the fillet for the tag.
- Etiketi için köşe yarıçapı.
-
-
-
- Locations of inserted holding tags
- Yerleştirilen tutma etiketlerinin bulunduğu yerler
-
-
-
- IDs of disabled holding tags
- Devre dışı bırakılan tutma etiketlerinin kimlikleri
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Yaklaşık yuvarlak etiketler için kullanılan # parçaların etkenlerine karar verme.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Tutma etiketleri bu yol için eklenemiyor - lütfen profil yolu seçin
-
The selected object is not a path
@@ -2983,6 +3179,46 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se
Create Tag Dress-up
Tag elbise yarat
+
+
+ The base path to modify
+ Değiştirilecek taban yolu
+
+
+
+ Width of tags.
+ Etiket genişliği.
+
+
+
+ Height of tags.
+ Satır yüksekliği.
+
+
+
+ Angle of tag plunge and ascent.
+ Etiket Dalma ve yükselme açısı.
+
+
+
+ Radius of the fillet for the tag.
+ Etiketi için köşe yarıçapı.
+
+
+
+ Locations of inserted holding tags
+ Yerleştirilen tutma etiketlerinin bulunduğu yerler
+
+
+
+ IDs of disabled holding tags
+ Devre dışı bırakılan tutma etiketlerinin kimlikleri
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Yaklaşık yuvarlak etiketler için kullanılan # parçaların etkenlerine karar verme.
+
No Base object found.
@@ -3003,6 +3239,11 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se
Base Path is empty.
Temel Yolu boş.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Tutma etiketleri bu yol için eklenemiyor - lütfen profil yolu seçin
+
Path_DressupZCorrect
@@ -3096,6 +3337,19 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se
Oymacılık İşlemleri
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Şablonu Dışarı Aktar
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Yol İşini, diğer işler için kullanılacak bir şablon olarak dışa aktarır
+
+
Path_Helix
@@ -3192,6 +3446,16 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se
Exports Path Job as a template to be used for other jobs
Yol İşini, diğer işler için kullanılacak bir şablon olarak dışa aktarır
+
+
+ Edit
+ Düzenle
+
+
+
+ Stock not a cylinder!
+ Stok bir silindir değil!
+
Edit Job
@@ -3212,6 +3476,16 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se
All Files (*.*)
Tüm dosyalar (*. *)
+
+
+ Unsupported stock object %s
+ Desteklenmeyen stok nesnesi %s
+
+
+
+ Unsupported stock type %s (%d)
+ Desteklenmeyen stok türü %s (%d)
+
Model Selection
@@ -3222,6 +3496,71 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se
Create Job
Kopya oluştur
+
+
+ Fixture
+ Fikstürler
+
+
+
+ Tool
+ Araç
+
+
+
+ Operation
+ İşlem
+
+
+
+ 2D
+ 2B
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Katı maddeler
+
+
+
+ Jobs
+ İşler
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Temel -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Kutu: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Silindir: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Desteklenmeyen dosya biçimi
+
Path_MillFace
@@ -3244,6 +3583,24 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se
Çalışmanın aktif durumunu değiştir
+
+ Path_Operation
+
+
+ None
+ Hiçbiri
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3453,6 +3810,14 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se
Tüm modelin, seçilen yüz(ler) in veya kenar(lar) ın ana hatlarını çiz
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ ÖzellikÇantası
+
+
Path_Sanity
@@ -3763,6 +4128,136 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se
Path_Surface
+
+
+ BaseBoundBox
+ Temel Bağlayıcı Kutu
+
+
+
+ Stock
+ Kütük
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Özel
+
+
+
+ Conventional
+ Geleneksel
+
+
+
+ Climb
+ Tırmanma
+
+
+
+ Circular
+ Dairesel
+
+
+
+ CircularZigZag
+ DaireselZikzak
+
+
+
+ Line
+ Çizgi
+
+
+
+ Offset
+ Uzaklaşma
+
+
+
+ Spiral
+ Sarmal
+
+
+
+ ZigZag
+ Zikzak
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Topluca
+
+
+
+ Individually
+ Bireysel olarak
+
+
+
+ Single-pass
+ Tek geçiş
+
+
+
+ Multi-pass
+ Çoklu geçiş
+
+
+
+ None
+ Hiçbiri
+
+
+
+ Only
+ Sadece
+
+
+
+ First
+ İlk
+
+
+
+ Last
+ Son
+
+
+
+ Planar
+ Düzlemsel
+
+
+
+ Rotational
+ Dönel
+
3D Surface
@@ -4015,6 +4510,183 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se
Modelden Su kesimi İşlemi oluştur
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ Bu işlem, OpenCamLib'in kurulmasını gerektiriyor.
+
+
+
+ OCL Dropcutter
+ OCL İniş Kesici
+
+
+
+ Experimental
+ Deneysel
+
+
+
+ BaseBoundBox
+ Temel Bağlayıcı Kutu
+
+
+
+ Stock
+ Kütük
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Özel
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Dairesel
+
+
+
+ CircularZigZag
+ DaireselZikzak
+
+
+
+ Line
+ Çizgi
+
+
+
+ Offset
+ Uzaklaşma
+
+
+
+ Spiral
+ Sarmal
+
+
+
+ ZigZag
+ Zikzak
+
+
+
+ Conventional
+ Geleneksel
+
+
+
+ Climb
+ Tırmanma
+
+
+
+ None
+ Hiçbiri
+
+
+
+ Collectively
+ Topluca
+
+
+
+ Individually
+ Bireysel olarak
+
+
+
+ Single-pass
+ Tek geçiş
+
+
+
+ Multi-pass
+ Çoklu geçiş
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ HoldingTags Dress-up'ı düzenleme
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Uzantılar için varsayılan uzunluk.
+
+
+
+ List of features to extend.
+ Uzatılacak özelliklerin listesi.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ Etkinleştirildiğinde, bağlantılı uzatma kenarları kablolarla birleştirilir.
+
+
+
+ Uses the outline of the base geometry.
+ Ana geometri için dış çizgiyi kullan.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ ÖzellikÇantasını Düzenle
+
+
+
+ Create PropertyBag
+ ÖzellikÇantası Oluştur
+
+
+
+ PropertyBag
+ ÖzellikÇantası
+
+
+
+ Creates an object which can be used to store reference properties.
+ Referans özelliklerini saklamak için kullanılabilecek bir nesne oluşturur.
+
+
+
+ List of custom property groups
+ Özel özellik gruplarının listesi
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_uk.qm b/src/Mod/Path/Gui/Resources/translations/Path_uk.qm
index 1fbc5ad2da..ca09d8e7dd 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_uk.qm and b/src/Mod/Path/Gui/Resources/translations/Path_uk.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_uk.ts b/src/Mod/Path/Gui/Resources/translations/Path_uk.ts
index 1eced16411..8b21c9c095 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_uk.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_uk.ts
@@ -213,10 +213,20 @@
The Z height of the hop
The Z height of the hop
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
Stop processing
- Stop processing
+ Зупинити обробку
@@ -243,6 +253,111 @@
The output location for the probe data to be written
The output location for the probe data to be written
+
+
+ The base geometry for this operation
+ The base geometry for this operation
+
+
+
+ Holds the calculated value for the StartDepth
+ Holds the calculated value for the StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Holds the calculated value for the FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ Make False, to prevent operation from generating code
+ Make False, to prevent operation from generating code
+
+
+
+ An optional comment for this Operation
+ An optional comment for this Operation
+
+
+
+ User Assigned Label
+ User Assigned Label
+
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
+
+
+ Base locations for this operation
+ Base locations for this operation
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Starting Depth of Tool- first cut depth in Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Final Depth of Tool- lowest value in Z
+
+
+
+ Incremental Step Down of Tool
+ Incremental Step Down of Tool
+
+
+
+ Maximum material removed on final pass.
+ Максимальна кількість матеріалу, що була видалена на заключному проході.
+
+
+
+ Rapid Safety Height between locations.
+ Rapid Safety Height between locations.
+
+
+
+ The start point of this path
+ Початкова точка цієї траєкторії
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Additional base objects to be engraved
@@ -256,7 +371,7 @@
Vcarve Tolerance
- Vcarve Tolerance
+ Точність V отворів
@@ -296,12 +411,12 @@
The Style of motion into the Path
- The Style of motion into the Path
+ Стиль руху по Лінії
The Style of motion out of the Path
- The Style of motion out of the Path
+ Стиль руху по Лінії
@@ -333,11 +448,6 @@
Fixture Offset Number
Fixture Offset Number
-
-
- Make False, to prevent operation from generating code
- Make False, to prevent operation from generating code
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
The gcode to be inserted
+
+
+ Angle of ramp.
+ Angle of ramp.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Custom feed rate
+
+
+ Width of tags.
+ Width of tags.
+
+
+
+ Height of tags.
+ Height of tags.
+
+
+
+ Angle of tag plunge and ascent.
+ Angle of tag plunge and ascent.
+
+
+
+ Radius of the fillet for the tag.
+ Radius of the fillet for the tag.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expression used for StepDown of new operations.
-
-
- Start pocketing at center or boundary
- Start pocketing at center or boundary
-
-
-
- Percent of cutter diameter to step over on each pass
- Percent of cutter diameter to step over on each pass
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Extra offset to apply to the operation. Direction is operation dependent.
+
+
+ Start pocketing at center or boundary
+ Start pocketing at center or boundary
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Percent of cutter diameter to step over on each pass
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Attempts to avoid unnecessary retractions.
+
+
+ The side of path to insert bones
+ The side of path to insert bones
+
+
+
+ The style of bones
+ The style of bones
+
+
+
+ Bones that aren't dressed up
+ Bones that aren't dressed up
+
+
+
+ The algorithm to determine the bone length
+ The algorithm to determine the bone length
+
+
+
+ Dressup length if Incision == custom
+ Dressup length if Incision == custom
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Початкове значення для випадкового тремтіння
+
+
+ List of custom property groups
+ List of custom property groups
+
The point file from the surface probing.
@@ -806,7 +981,7 @@
Split Arcs into discrete segments
- Split Arcs into discrete segments
+ Розділити арки на окремі сегменти
@@ -848,6 +1023,76 @@
The tool used by this controller
The tool used by this controller
+
+
+ List of disabled features
+ Перелік вимкнених властивостей
+
+
+
+ The NC output file for this project
+ The NC output file for this project
+
+
+
+ Select the Post Processor
+ Оберіть пост процесор
+
+
+
+ Last Time the Job was post-processed
+ Last Time the Job was post-processed
+
+
+
+ An optional description for this job
+ An optional description for this job
+
+
+
+ Job Cycle Time Estimation
+ Job Cycle Time Estimation
+
+
+
+ Solid object to be used as stock.
+ Solid object to be used as stock.
+
+
+
+ Select the Type of Job
+ Виберіть тип роботи
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ SetupSheet holding the settings for this job
+ SetupSheet holding the settings for this job
+
+
+
+ The base objects for all operations
+ The base objects for all operations
+
+
+
+ Collection of all tool controllers for the job
+ Collection of all tool controllers for the job
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
Didn't find job %s
+
+
+ Illegal arc: Start and end radii not equal
+ Illegal arc: Start and end radii not equal
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
Selected tool is not a drill
-
-
- Illegal arc: Start and end radii not equal
- Illegal arc: Start and end radii not equal
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
CCW
-
-
- List of disabled features
- Перелік вимкнених властивостей
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utils
+
+
+ List of disabled features
+ Перелік вимкнених властивостей
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Creates a Deburr Path along Edges or around Faces
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Edit HoldingTags Dress-up
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Unsupported stock object %s
-
-
-
- Unsupported stock type %s (%d)
- Unsupported stock type %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
Stock not a cylinder!
+
+
+ Unsupported stock object %s
+ Unsupported stock object %s
+
+
+
+ Unsupported stock type %s (%d)
+ Unsupported stock type %s (%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Solid object to be used as stock.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Split output into multiple gcode files
-
-
-
- If multiple WCS, order the output this way
- If multiple WCS, order the output this way
-
-
-
- The Work Coordinate Systems for the Job
- The Work Coordinate Systems for the Job
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Collection of all tool controllers for the job
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ Select the Type of Job
+ Виберіть тип роботи
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- The base geometry for this operation
-
-
-
- Holds the calculated value for the StartDepth
- Holds the calculated value for the StartDepth
-
-
-
- Holds the calculated value for the FinalDepth
- Holds the calculated value for the FinalDepth
-
-
-
- Holds the diameter of the tool
- Holds the diameter of the tool
-
-
-
- Holds the max Z value of Stock
- Holds the max Z value of Stock
-
-
-
- Holds the min Z value of Stock
- Holds the min Z value of Stock
-
-
-
- Make False, to prevent operation from generating code
- Make False, to prevent operation from generating code
-
-
-
- An optional comment for this Operation
- An optional comment for this Operation
-
-
-
- User Assigned Label
- User Assigned Label
-
-
-
- Operations Cycle Time Estimation
- Operations Cycle Time Estimation
-
-
-
- Base locations for this operation
- Base locations for this operation
-
-
-
- Coolant mode for this operation
- Coolant mode for this operation
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Starting Depth of Tool- first cut depth in Z
-
-
-
- Final Depth of Tool- lowest value in Z
- Final Depth of Tool- lowest value in Z
-
-
-
- Starting Depth internal use only for derived values
- Starting Depth internal use only for derived values
-
-
-
- Incremental Step Down of Tool
- Incremental Step Down of Tool
-
-
-
- Maximum material removed on final pass.
- Максимальна кількість матеріалу, що була видалена на заключному проході.
-
-
-
- The height needed to clear clamps and obstructions
- The height needed to clear clamps and obstructions
-
-
-
- Rapid Safety Height between locations.
- Rapid Safety Height between locations.
-
-
-
- The start point of this path
- Початкова точка цієї траєкторії
-
-
-
- Make True, if specifying a Start Point
- Make True, if specifying a Start Point
-
-
-
- Lower limit of the turning diameter
- Lower limit of the turning diameter
-
-
-
- Upper limit of the turning diameter.
- Upper limit of the turning diameter.
-
-
-
- Coolant option for this operation
- Coolant option for this operation
-
Edit
@@ -1668,11 +1785,131 @@ If it is necessary to set the FinalDepth manually please select a different oper
Pick Start Point
Pick Start Point
+
+
+ Make False, to prevent operation from generating code
+ Make False, to prevent operation from generating code
+
+
+
+ The base geometry for this operation
+ The base geometry for this operation
+
+
+
+ Holds the calculated value for the StartDepth
+ Holds the calculated value for the StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Holds the calculated value for the FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ An optional comment for this Operation
+ An optional comment for this Operation
+
+
+
+ User Assigned Label
+ User Assigned Label
+
+
+
+ Base locations for this operation
+ Base locations for this operation
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Starting Depth of Tool- first cut depth in Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Final Depth of Tool- lowest value in Z
+
+
+
+ Starting Depth internal use only for derived values
+ Starting Depth internal use only for derived values
+
+
+
+ Incremental Step Down of Tool
+ Incremental Step Down of Tool
+
+
+
+ Maximum material removed on final pass.
+ Максимальна кількість матеріалу, що була видалена на заключному проході.
+
+
+
+ The height needed to clear clamps and obstructions
+ The height needed to clear clamps and obstructions
+
+
+
+ Rapid Safety Height between locations.
+ Rapid Safety Height between locations.
+
+
+
+ The start point of this path
+ Початкова точка цієї траєкторії
+
+
+
+ Make True, if specifying a Start Point
+ Make True, if specifying a Start Point
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Job Cycle Time Estimation
Job Cycle Time Estimation
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
PathPlane
@@ -1735,29 +1972,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Final depth set below ZMin of face(s) selected.
-
- PathPocketShape
-
-
- Default length of extensions.
- Default length of extensions.
-
-
-
- List of features to extend.
- List of features to extend.
-
-
-
- When enabled connected extension edges are combined to wires.
- When enabled connected extension edges are combined to wires.
-
-
-
- Uses the outline of the base geometry.
- Uses the outline of the base geometry.
-
-
PathProfile
@@ -1831,34 +2045,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
For open edges, verify Final Depth for this operation.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Edit PropertyBag
-
-
-
- Create PropertyBag
- Create PropertyBag
-
-
-
- PropertyBag
- PropertyBag
-
-
-
- Creates an object which can be used to store reference properties.
- Creates an object which can be used to store reference properties.
-
-
-
- List of custom property groups
- List of custom property groups
-
-
PathSlot
@@ -2493,12 +2679,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Clearing
- Clearing
+ Очищення
Profiling
- Profiling
+ Профілювання
@@ -2792,7 +2978,7 @@ If it is necessary to set the FinalDepth manually please select a different oper
Length/Radius positive not Null
- Length/Radius positive not Null
+ Довжина / радіус позитивний, а не ненульовий
@@ -2885,59 +3071,69 @@ If it is necessary to set the FinalDepth manually please select a different oper
Angle of ramp.
Angle of ramp.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Гвинт
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Підлаштувати
+
RampEntry Dress-up
RampEntry Dress-up
+
+
+ Please select one path object
+ Please select one path object
+
+
+
+ The selected object is not a path
+ The selected object is not a path
+
+
+
+ Please select a Profile object
+ Please select a Profile object
+
Path_DressupTag
-
-
- The base path to modify
- The base path to modify
-
-
-
- Width of tags.
- Width of tags.
-
-
-
- Height of tags.
- Height of tags.
-
-
-
- Angle of tag plunge and ascent.
- Angle of tag plunge and ascent.
-
-
-
- Radius of the fillet for the tag.
- Radius of the fillet for the tag.
-
-
-
- Locations of inserted holding tags
- Locations of inserted holding tags
-
-
-
- IDs of disabled holding tags
- IDs of disabled holding tags
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Factor determining the # of segments used to approximate rounded tags.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Cannot insert holding tags for this path - please select a Profile path
-
The selected object is not a path
@@ -2983,6 +3179,46 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Tag Dress-up
Create Tag Dress-up
+
+
+ The base path to modify
+ The base path to modify
+
+
+
+ Width of tags.
+ Width of tags.
+
+
+
+ Height of tags.
+ Height of tags.
+
+
+
+ Angle of tag plunge and ascent.
+ Angle of tag plunge and ascent.
+
+
+
+ Radius of the fillet for the tag.
+ Radius of the fillet for the tag.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Factor determining the # of segments used to approximate rounded tags.
+
No Base object found.
@@ -3003,6 +3239,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Base Path is empty.
Base Path is empty.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Cannot insert holding tags for this path - please select a Profile path
+
Path_DressupZCorrect
@@ -3042,12 +3283,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
G99
- G99
+ G99
G98
- G98
+ G98
@@ -3096,6 +3337,19 @@ If it is necessary to set the FinalDepth manually please select a different oper
Engraving Operations
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Export Template
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Exports Path Job as a template to be used for other jobs
+
+
Path_Helix
@@ -3192,6 +3446,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
Exports Path Job as a template to be used for other jobs
Exports Path Job as a template to be used for other jobs
+
+
+ Edit
+ Правка
+
+
+
+ Stock not a cylinder!
+ Stock not a cylinder!
+
Edit Job
@@ -3212,6 +3476,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
All Files (*.*)
Всі файли (*.*)
+
+
+ Unsupported stock object %s
+ Unsupported stock object %s
+
+
+
+ Unsupported stock type %s (%d)
+ Unsupported stock type %s (%d)
+
Model Selection
@@ -3222,6 +3496,71 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Job
Create Job
+
+
+ Fixture
+ Fixture
+
+
+
+ Tool
+ Інструмент
+
+
+
+ Operation
+ Operation
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Суцільні тіла
+
+
+
+ Jobs
+ Завдання
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Box: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Циліндр: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Unsupported stock type
+
Path_MillFace
@@ -3244,6 +3583,24 @@ If it is necessary to set the FinalDepth manually please select a different oper
Toggle the Active State of the Operation
+
+ Path_Operation
+
+
+ None
+ Немає
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3453,6 +3810,14 @@ If it is necessary to set the FinalDepth manually please select a different oper
Profile entire model, selected face(s) or selected edge(s)
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
@@ -3763,6 +4128,136 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Підлаштувати
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Лінія
+
+
+
+ Offset
+ Зміщення
+
+
+
+ Spiral
+ Спіраль
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ None
+ Немає
+
+
+
+ Only
+ Only
+
+
+
+ First
+ First
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Плоский
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -3789,22 +4284,22 @@ If it is necessary to set the FinalDepth manually please select a different oper
Metric Internal
- Metric Internal
+ Внутрішня метричність
Imperial Internal
- Imperial Internal
+ Внутрішнє Імперське
LeftHand
- LeftHand
+ Шульга
RightHand
- RightHand
+ Права рука
@@ -4015,6 +4510,183 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create a Waterline Operation from a model
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ This operation requires OpenCamLib to be installed.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Підлаштувати
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Лінія
+
+
+
+ Offset
+ Зміщення
+
+
+
+ Spiral
+ Спіраль
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ None
+ Немає
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Edit HoldingTags Dress-up
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ When enabled connected extension edges are combined to wires.
+
+
+
+ Uses the outline of the base geometry.
+ Uses the outline of the base geometry.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Edit PropertyBag
+
+
+
+ Create PropertyBag
+ Create PropertyBag
+
+
+
+ PropertyBag
+ PropertyBag
+
+
+
+ Creates an object which can be used to store reference properties.
+ Creates an object which can be used to store reference properties.
+
+
+
+ List of custom property groups
+ List of custom property groups
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.qm b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.qm
index 3b4f040da6..551ec52ef4 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.qm and b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts
index 6c49525784..d21b1809e4 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts
@@ -213,6 +213,16 @@
The Z height of the hop
L'alçària Z del salt
+
+
+ Default length of extensions.
+ Llargària per defecte de les extensions.
+
+
+
+ List of features to extend.
+ Llista de les propietats per a estendre.
+
Stop processing
@@ -243,6 +253,111 @@
The output location for the probe data to be written
La ubicació d'eixida que s'ha d'escriure per a les dades de la sonda
+
+
+ The base geometry for this operation
+ La geometria base per a aquesta operació
+
+
+
+ Holds the calculated value for the StartDepth
+ Pressiona el valor calculat per a la StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Pressiona el valor calculat per a la FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Mantín el diàmetre de l'eina
+
+
+
+ Holds the max Z value of Stock
+ Manté el valor màxim Z de l'estoc
+
+
+
+ Holds the min Z value of Stock
+ Manté el valor mínim Z de l'estoc
+
+
+
+ Make False, to prevent operation from generating code
+ Marqueu «fals», per a evitar l'operació de generació de codi
+
+
+
+ An optional comment for this Operation
+ Un comentari opcional per a aquesta operació
+
+
+
+ User Assigned Label
+ Etiqueta assignada a l'usuari
+
+
+
+ Operations Cycle Time Estimation
+ Estimació del temps del cicle d'operacions
+
+
+
+ Base locations for this operation
+ Posició de base per a aquesta operació
+
+
+
+ Coolant mode for this operation
+ Mode de refrigeració per a aquesta operació
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Profunditat inicial de l'eina: profunditat en Z del primer tall
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Profunditat final de l'eina: valor més baix en Z
+
+
+
+ Incremental Step Down of Tool
+ Pas incremental cap avall de l'eina
+
+
+
+ Maximum material removed on final pass.
+ Màxim de material retirat en el pas final
+
+
+
+ Rapid Safety Height between locations.
+ Alçària de seguretat en avanç ràpid entre ubicacions.
+
+
+
+ The start point of this path
+ El punt d'inici d'aquest camí
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Opció de refrigeració per a aquesta operació
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
Nombre de desplaçaments de la fixació
-
-
- Make False, to prevent operation from generating code
- Marqueu «fals», per a evitar l'operació de generació de codi
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
El gcode que s'ha d'inserir
+
+
+ Angle of ramp.
+ Angle de la rampa.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Velocitat d'avanç personalitzada
+
+
+ Width of tags.
+ Amplària de les etiquetes
+
+
+
+ Height of tags.
+ Alçària de les etiquetes
+
+
+
+ Angle of tag plunge and ascent.
+ Angle de l'etiqueta durant la penetració i ascens
+
+
+
+ Radius of the fillet for the tag.
+ Radi d'arredoniment per a l'etiqueta
+
+
+
+ Locations of inserted holding tags
+ Posicions de les etiquetes de subjecció inserides
+
+
+
+ IDs of disabled holding tags
+ ID de les etiquetes de subjecció inhabilitades
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expressió utilitzada per a baixar de les noves operacions.
-
-
- Start pocketing at center or boundary
- Comença a foradar al centre o al límit
-
-
-
- Percent of cutter diameter to step over on each pass
- Avanç en percentatge del diàmetre de l'eina de tall en cada passada
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Desplaçament addicional que s'aplica a l'operació. La direcció és dependent de l'operació.
+
+
+ Start pocketing at center or boundary
+ Comença a foradar al centre o al límit
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Avanç en percentatge del diàmetre de l'eina de tall en cada passada
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Intents per a evitar retraccions innecessàries.
+
+
+ The side of path to insert bones
+ El costat del camí en què s'insereixen els ossos
+
+
+
+ The style of bones
+ L'estil dels ossos
+
+
+
+ Bones that aren't dressed up
+ Ossos que no estan vestits
+
+
+
+ The algorithm to determine the bone length
+ L'algoritme per a determinar la longitud dels ossos
+
+
+
+ Dressup length if Incision == custom
+ Longitud del vestit si incisió == personalitzada
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ List of custom property groups
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
L'eina utilitzada per aquest controlador
+
+
+ List of disabled features
+ Llista de característiques desactivades
+
+
+
+ The NC output file for this project
+ El fitxer d'eixida NC per a aquest projecte
+
+
+
+ Select the Post Processor
+ Selecciona el postprocessador
+
+
+
+ Last Time the Job was post-processed
+ Last Time the Job was post-processed
+
+
+
+ An optional description for this job
+ Una descripció opcional d'aquesta tasca
+
+
+
+ Job Cycle Time Estimation
+ Job Cycle Time Estimation
+
+
+
+ Solid object to be used as stock.
+ Objecte sòlid per a utilitzar-se com a estoc.
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ Divideix l'eixida en diversos fitxers de codi gcode
+
+
+
+ If multiple WCS, order the output this way
+ Si hi ha diversos WCS, ordeneu la sortida d'aquesta manera
+
+
+
+ The Work Coordinate Systems for the Job
+ Els sistemes de coordenades de treball (WCS) per a la tasca
+
+
+
+ SetupSheet holding the settings for this job
+ SetupSheet manté la configuració d'aquest treball
+
+
+
+ The base objects for all operations
+ Els objectes base pera totes les operacions
+
+
+
+ Collection of all tool controllers for the job
+ Collection of all tool controllers for the job
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
No s'ha trobat la tasca %s
+
+
+ Illegal arc: Start and end radii not equal
+ Illegal arc: Start and end radii not equal
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
Selected tool is not a drill
-
-
- Illegal arc: Start and end radii not equal
- Illegal arc: Start and end radii not equal
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
CCW
-
-
- List of disabled features
- Llista de característiques desactivades
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utils
+
+
+ List of disabled features
+ Llista de característiques desactivades
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Crea un camí de desbarba al llarg de les arestes o al voltant de les cares
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Edita l'aspecte d'etiquetes de subjecció
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Tipus d'objecte estoc incompatible %s
-
-
-
- Unsupported stock type %s (%d)
- Incompatible el tipus d'estoc %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
L'estoc no és un cilindre!
+
+
+ Unsupported stock object %s
+ Tipus d'objecte estoc incompatible %s
+
+
+
+ Unsupported stock type %s (%d)
+ Incompatible el tipus d'estoc %s (%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Objecte sòlid per a utilitzar-se com a estoc.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Divideix l'eixida en diversos fitxers de codi gcode
-
-
-
- If multiple WCS, order the output this way
- Si hi ha diversos WCS, ordeneu la sortida d'aquesta manera
-
-
-
- The Work Coordinate Systems for the Job
- Els sistemes de coordenades de treball (WCS) per a la tasca
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Collection of all tool controllers for the job
+
+
+ The Work Coordinate Systems for the Job
+ Els sistemes de coordenades de treball (WCS) per a la tasca
+
+
+
+ If multiple WCS, order the output this way
+ Si hi ha diversos WCS, ordeneu la sortida d'aquesta manera
+
+
+
+ Split output into multiple gcode files
+ Divideix l'eixida en diversos fitxers de codi gcode
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- La geometria base per a aquesta operació
-
-
-
- Holds the calculated value for the StartDepth
- Pressiona el valor calculat per a la StartDepth
-
-
-
- Holds the calculated value for the FinalDepth
- Pressiona el valor calculat per a la FinalDepth
-
-
-
- Holds the diameter of the tool
- Mantín el diàmetre de l'eina
-
-
-
- Holds the max Z value of Stock
- Manté el valor màxim Z de l'estoc
-
-
-
- Holds the min Z value of Stock
- Manté el valor mínim Z de l'estoc
-
-
-
- Make False, to prevent operation from generating code
- Marqueu «fals», per a evitar l'operació de generació de codi
-
-
-
- An optional comment for this Operation
- Un comentari opcional per a aquesta operació
-
-
-
- User Assigned Label
- Etiqueta assignada a l'usuari
-
-
-
- Operations Cycle Time Estimation
- Estimació del temps del cicle d'operacions
-
-
-
- Base locations for this operation
- Posició de base per a aquesta operació
-
-
-
- Coolant mode for this operation
- Mode de refrigeració per a aquesta operació
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Profunditat inicial de l'eina: profunditat en Z del primer tall
-
-
-
- Final Depth of Tool- lowest value in Z
- Profunditat final de l'eina: valor més baix en Z
-
-
-
- Starting Depth internal use only for derived values
- Profunditat inicial d'ús intern, únicament per als valors derivats
-
-
-
- Incremental Step Down of Tool
- Pas incremental cap avall de l'eina
-
-
-
- Maximum material removed on final pass.
- Màxim de material retirat en el pas final
-
-
-
- The height needed to clear clamps and obstructions
- La alçària necessària per a llevar subjeccions i obstruccions
-
-
-
- Rapid Safety Height between locations.
- Alçària de seguretat en avanç ràpid entre ubicacions.
-
-
-
- The start point of this path
- El punt d'inici d'aquest camí
-
-
-
- Make True, if specifying a Start Point
- Marqueu «cert», si s'especifica un punt final
-
-
-
- Lower limit of the turning diameter
- Lower limit of the turning diameter
-
-
-
- Upper limit of the turning diameter.
- Upper limit of the turning diameter.
-
-
-
- Coolant option for this operation
- Opció de refrigeració per a aquesta operació
-
Edit
@@ -1668,11 +1785,131 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Pick Start Point
Trieu el punt d'inici
+
+
+ Make False, to prevent operation from generating code
+ Marqueu «fals», per a evitar l'operació de generació de codi
+
+
+
+ The base geometry for this operation
+ La geometria base per a aquesta operació
+
+
+
+ Holds the calculated value for the StartDepth
+ Pressiona el valor calculat per a la StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Pressiona el valor calculat per a la FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Mantín el diàmetre de l'eina
+
+
+
+ Holds the max Z value of Stock
+ Manté el valor màxim Z de l'estoc
+
+
+
+ Holds the min Z value of Stock
+ Manté el valor mínim Z de l'estoc
+
+
+
+ An optional comment for this Operation
+ Un comentari opcional per a aquesta operació
+
+
+
+ User Assigned Label
+ Etiqueta assignada a l'usuari
+
+
+
+ Base locations for this operation
+ Posició de base per a aquesta operació
+
+
+
+ Coolant mode for this operation
+ Mode de refrigeració per a aquesta operació
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Profunditat inicial de l'eina: profunditat en Z del primer tall
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Profunditat final de l'eina: valor més baix en Z
+
+
+
+ Starting Depth internal use only for derived values
+ Profunditat inicial d'ús intern, únicament per als valors derivats
+
+
+
+ Incremental Step Down of Tool
+ Pas incremental cap avall de l'eina
+
+
+
+ Maximum material removed on final pass.
+ Màxim de material retirat en el pas final
+
+
+
+ The height needed to clear clamps and obstructions
+ La alçària necessària per a llevar subjeccions i obstruccions
+
+
+
+ Rapid Safety Height between locations.
+ Alçària de seguretat en avanç ràpid entre ubicacions.
+
+
+
+ The start point of this path
+ El punt d'inici d'aquest camí
+
+
+
+ Make True, if specifying a Start Point
+ Marqueu «cert», si s'especifica un punt final
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Opció de refrigeració per a aquesta operació
+
Job Cycle Time Estimation
Job Cycle Time Estimation
+
+
+ Operations Cycle Time Estimation
+ Estimació del temps del cicle d'operacions
+
PathPlane
@@ -1735,29 +1972,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Profunditat final establerta per davall de ZMin de la cara o cares seleccionades.
-
- PathPocketShape
-
-
- Default length of extensions.
- Llargària per defecte de les extensions.
-
-
-
- List of features to extend.
- Llista de les propietats per a estendre.
-
-
-
- When enabled connected extension edges are combined to wires.
- Si està habilitat, les arestes de les extensions connectades es combinen amb els filferros.
-
-
-
- Uses the outline of the base geometry.
- Utilitza el contorn de la geometria de base.
-
-
PathProfile
@@ -1831,34 +2045,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
For open edges, verify Final Depth for this operation.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Edit PropertyBag
-
-
-
- Create PropertyBag
- Create PropertyBag
-
-
-
- PropertyBag
- PropertyBag
-
-
-
- Creates an object which can be used to store reference properties.
- Creates an object which can be used to store reference properties.
-
-
-
- List of custom property groups
- List of custom property groups
-
-
PathSlot
@@ -2883,59 +3069,69 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Angle of ramp.
Angle de la rampa.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Hèlix
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Personalitzat
+
RampEntry Dress-up
Aspecte d'EntradaRampa
+
+
+ Please select one path object
+ Seleccioneu un objecte de tipus camí
+
+
+
+ The selected object is not a path
+ L'objecte seleccionat no és un camí
+
+
+
+ Please select a Profile object
+ Seleccioneu un objecte perfil
+
Path_DressupTag
-
-
- The base path to modify
- El camí de base que es modifica
-
-
-
- Width of tags.
- Amplària de les etiquetes
-
-
-
- Height of tags.
- Alçària de les etiquetes
-
-
-
- Angle of tag plunge and ascent.
- Angle de l'etiqueta durant la penetració i ascens
-
-
-
- Radius of the fillet for the tag.
- Radi d'arredoniment per a l'etiqueta
-
-
-
- Locations of inserted holding tags
- Posicions de les etiquetes de subjecció inserides
-
-
-
- IDs of disabled holding tags
- ID de les etiquetes de subjecció inhabilitades
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Factor que determina els # de segments utilitzats per a aproximar etiquetes arredonides.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- No es poden inserir etiquetes de subjecció per a aquest camí; seleccioneu un perfil de camí
-
The selected object is not a path
@@ -2981,6 +3177,46 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Create Tag Dress-up
Crea un aspecte d'etiqueta
+
+
+ The base path to modify
+ El camí de base que es modifica
+
+
+
+ Width of tags.
+ Amplària de les etiquetes
+
+
+
+ Height of tags.
+ Alçària de les etiquetes
+
+
+
+ Angle of tag plunge and ascent.
+ Angle de l'etiqueta durant la penetració i ascens
+
+
+
+ Radius of the fillet for the tag.
+ Radi d'arredoniment per a l'etiqueta
+
+
+
+ Locations of inserted holding tags
+ Posicions de les etiquetes de subjecció inserides
+
+
+
+ IDs of disabled holding tags
+ ID de les etiquetes de subjecció inhabilitades
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Factor que determina els # de segments utilitzats per a aproximar etiquetes arredonides.
+
No Base object found.
@@ -3001,6 +3237,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Base Path is empty.
El camí base és buit.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ No es poden inserir etiquetes de subjecció per a aquest camí; seleccioneu un perfil de camí
+
Path_DressupZCorrect
@@ -3094,6 +3335,19 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Operacions de gravat
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Exporta la plantilla
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Exporta la tasca de camí com a plantilla per a utilitzar-la en altres tasques
+
+
Path_Helix
@@ -3190,6 +3444,16 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Exports Path Job as a template to be used for other jobs
Exporta la tasca de camí com a plantilla per a utilitzar-la en altres tasques
+
+
+ Edit
+ Edita
+
+
+
+ Stock not a cylinder!
+ L'estoc no és un cilindre!
+
Edit Job
@@ -3210,6 +3474,16 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
All Files (*.*)
Tots els fitxers (*.*)
+
+
+ Unsupported stock object %s
+ Tipus d'objecte estoc incompatible %s
+
+
+
+ Unsupported stock type %s (%d)
+ Incompatible el tipus d'estoc %s (%d)
+
Model Selection
@@ -3220,6 +3494,71 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Create Job
Crea una tasca
+
+
+ Fixture
+ Fixació
+
+
+
+ Tool
+ Eina
+
+
+
+ Operation
+ Operació
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Sòlids
+
+
+
+ Jobs
+ Treballs
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Caixa: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Cilindre: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Tipus d'estoc incompatible
+
Path_MillFace
@@ -3242,6 +3581,24 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Commuta l'estat actiu de l'operació
+
+ Path_Operation
+
+
+ None
+ Cap
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3451,6 +3808,14 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Profile entire model, selected face(s) or selected edge(s)
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
@@ -3761,6 +4126,136 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Personalitzat
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Línia
+
+
+
+ Offset
+ Separació
+
+
+
+ Spiral
+ Espiral
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ None
+ Cap
+
+
+
+ Only
+ Only
+
+
+
+ First
+ First
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Planar
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -4013,6 +4508,183 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una
Creeu una operació de línia de navegació a partir d'un model
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ Aquesta operació requereix que s'instal·le OpenCamLib.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Personalitzat
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Línia
+
+
+
+ Offset
+ Separació
+
+
+
+ Spiral
+ Espiral
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ None
+ Cap
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Edita l'aspecte d'etiquetes de subjecció
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Llargària per defecte de les extensions.
+
+
+
+ List of features to extend.
+ Llista de les propietats per a estendre.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ Si està habilitat, les arestes de les extensions connectades es combinen amb els filferros.
+
+
+
+ Uses the outline of the base geometry.
+ Utilitza el contorn de la geometria de base.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Edit PropertyBag
+
+
+
+ Create PropertyBag
+ Create PropertyBag
+
+
+
+ PropertyBag
+ PropertyBag
+
+
+
+ Creates an object which can be used to store reference properties.
+ Creates an object which can be used to store reference properties.
+
+
+
+ List of custom property groups
+ List of custom property groups
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_vi.qm b/src/Mod/Path/Gui/Resources/translations/Path_vi.qm
index 1840063d90..fcc64b988e 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_vi.qm and b/src/Mod/Path/Gui/Resources/translations/Path_vi.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_vi.ts b/src/Mod/Path/Gui/Resources/translations/Path_vi.ts
index 6a8f5edea1..4f122c5f6f 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_vi.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_vi.ts
@@ -213,6 +213,16 @@
The Z height of the hop
Chiều cao Z của bước nhảy
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
Stop processing
@@ -243,6 +253,111 @@
The output location for the probe data to be written
Vị trí ghi dữ liệu thăm dò
+
+
+ The base geometry for this operation
+ Hình dạng cơ sở cho hoạt động này
+
+
+
+ Holds the calculated value for the StartDepth
+ Cố định giá trị được tính cho Độ sâu đầu tiên
+
+
+
+ Holds the calculated value for the FinalDepth
+ Cố định giá trị được tính cho Độ sâu cuối cùng
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ Make False, to prevent operation from generating code
+ Làm Sai, để ngăn chặn hoạt động tạo mã
+
+
+
+ An optional comment for this Operation
+ Một chú thích tùy chọn cho hoạt động này
+
+
+
+ User Assigned Label
+ Nhãn được gán cho người dùng
+
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
+
+
+ Base locations for this operation
+ Vị trí cơ sở cho hoạt động này
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Bắt đầu chiều sâu của công cụ - mặt cắt đầu tiên ở độ sâu Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Độ sâu cuối cùng của công cụ - giá trị thấp nhất theo trục z
+
+
+
+ Incremental Step Down of Tool
+ Công cụ gia tăng bước xuống
+
+
+
+ Maximum material removed on final pass.
+ Lượng vật liệu tối đa bị loại bỏ ở lần kiểm tra cuối cùng.
+
+
+
+ Rapid Safety Height between locations.
+ Chiều cao an toàn nhanh chóng giữa các vị trí.
+
+
+
+ The start point of this path
+ Điểm đầu của đường dẫn này
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
Số lượng Offset cố định
-
-
- Make False, to prevent operation from generating code
- Làm Sai, để ngăn chặn hoạt động tạo mã
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
Mã gcode được chèn vào
+
+
+ Angle of ramp.
+ Góc dốc.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Custom feed rate
+
+
+ Width of tags.
+ Chiều rộng của thẻ.
+
+
+
+ Height of tags.
+ Chiều cao của thẻ.
+
+
+
+ Angle of tag plunge and ascent.
+ Góc của thẻ giảm xuống và tăng lên.
+
+
+
+ Radius of the fillet for the tag.
+ Bán kính của phần làm tròn cho thẻ.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expression used for StepDown of new operations.
-
-
- Start pocketing at center or boundary
- Bắt đầu tạo túi ở phần trung tâm hoặc ranh giới
-
-
-
- Percent of cutter diameter to step over on each pass
- Phần trăm đường kính dao cắt từng bước trên mỗi đường chuyền
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Offset thêm để áp dụng cho các thao tác. Hướng thao tác là phụ thuộc.
+
+
+ Start pocketing at center or boundary
+ Bắt đầu tạo túi ở phần trung tâm hoặc ranh giới
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Phần trăm đường kính dao cắt từng bước trên mỗi đường chuyền
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Attempts to avoid unnecessary retractions.
+
+
+ The side of path to insert bones
+ Một bên của đường dẫn được chèn vào thanh kết nối
+
+
+
+ The style of bones
+ Kiểu bộ khung
+
+
+
+ Bones that aren't dressed up
+ Thanh liên kết không được vẽ bề ngoài
+
+
+
+ The algorithm to determine the bone length
+ Thuật toán xác định chiều dài thanh liên kết
+
+
+
+ Dressup length if Incision == custom
+ Chiều dài vẽ bề ngoài nếu Vết khắc == tùy chỉnh
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ List of custom property groups
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
Công cụ được sử dụng bởi bộ điều khiển này
+
+
+ List of disabled features
+ Danh sách các tính năng bị vô hiệu hóa
+
+
+
+ The NC output file for this project
+ Tệp đầu ra NC cho dự án này
+
+
+
+ Select the Post Processor
+ Chọn Đường chạy dao
+
+
+
+ Last Time the Job was post-processed
+ Last Time the Job was post-processed
+
+
+
+ An optional description for this job
+ An optional description for this job
+
+
+
+ Job Cycle Time Estimation
+ Job Cycle Time Estimation
+
+
+
+ Solid object to be used as stock.
+ Vật thể rắn để dùng làm hàng dự trữ.
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ SetupSheet holding the settings for this job
+ SetupSheet giữ các cài đặt cho công việc này
+
+
+
+ The base objects for all operations
+ The base objects for all operations
+
+
+
+ Collection of all tool controllers for the job
+ Collection of all tool controllers for the job
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
Không tìm được công việc %s
+
+
+ Illegal arc: Start and end radii not equal
+ Illegal arc: Start and end radii not equal
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
Selected tool is not a drill
-
-
- Illegal arc: Start and end radii not equal
- Illegal arc: Start and end radii not equal
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
Quay nghịch
-
-
- List of disabled features
- Danh sách các tính năng bị vô hiệu hóa
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utils
+
+
+ List of disabled features
+ Danh sách các tính năng bị vô hiệu hóa
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Creates a Deburr Path along Edges or around Faces
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Chỉnh sửa thẻ lưu giữ thiết kế áo đường
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Đối tượng dự trữ không được hỗ trợ %s
-
-
-
- Unsupported stock type %s (%d)
- Loại hàng dự trữ không được hỗ trợ %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
Hàng dự trữ không phải là một hình trụ!
+
+
+ Unsupported stock object %s
+ Đối tượng dự trữ không được hỗ trợ %s
+
+
+
+ Unsupported stock type %s (%d)
+ Loại hàng dự trữ không được hỗ trợ %s (%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Vật thể rắn để dùng làm hàng dự trữ.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Split output into multiple gcode files
-
-
-
- If multiple WCS, order the output this way
- If multiple WCS, order the output this way
-
-
-
- The Work Coordinate Systems for the Job
- The Work Coordinate Systems for the Job
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Collection of all tool controllers for the job
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- Hình dạng cơ sở cho hoạt động này
-
-
-
- Holds the calculated value for the StartDepth
- Cố định giá trị được tính cho Độ sâu đầu tiên
-
-
-
- Holds the calculated value for the FinalDepth
- Cố định giá trị được tính cho Độ sâu cuối cùng
-
-
-
- Holds the diameter of the tool
- Holds the diameter of the tool
-
-
-
- Holds the max Z value of Stock
- Holds the max Z value of Stock
-
-
-
- Holds the min Z value of Stock
- Holds the min Z value of Stock
-
-
-
- Make False, to prevent operation from generating code
- Làm Sai, để ngăn chặn hoạt động tạo mã
-
-
-
- An optional comment for this Operation
- Một chú thích tùy chọn cho hoạt động này
-
-
-
- User Assigned Label
- Nhãn được gán cho người dùng
-
-
-
- Operations Cycle Time Estimation
- Operations Cycle Time Estimation
-
-
-
- Base locations for this operation
- Vị trí cơ sở cho hoạt động này
-
-
-
- Coolant mode for this operation
- Coolant mode for this operation
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Bắt đầu chiều sâu của công cụ - mặt cắt đầu tiên ở độ sâu Z
-
-
-
- Final Depth of Tool- lowest value in Z
- Độ sâu cuối cùng của công cụ - giá trị thấp nhất theo trục z
-
-
-
- Starting Depth internal use only for derived values
- Starting Depth internal use only for derived values
-
-
-
- Incremental Step Down of Tool
- Công cụ gia tăng bước xuống
-
-
-
- Maximum material removed on final pass.
- Lượng vật liệu tối đa bị loại bỏ ở lần kiểm tra cuối cùng.
-
-
-
- The height needed to clear clamps and obstructions
- Chiều cao cần thiết để xóa kẹp và vật cản
-
-
-
- Rapid Safety Height between locations.
- Chiều cao an toàn nhanh chóng giữa các vị trí.
-
-
-
- The start point of this path
- Điểm đầu của đường dẫn này
-
-
-
- Make True, if specifying a Start Point
- Thực hiện đúng, nếu chỉ định điểm đầu
-
-
-
- Lower limit of the turning diameter
- Lower limit of the turning diameter
-
-
-
- Upper limit of the turning diameter.
- Upper limit of the turning diameter.
-
-
-
- Coolant option for this operation
- Coolant option for this operation
-
Edit
@@ -1668,11 +1785,131 @@ If it is necessary to set the FinalDepth manually please select a different oper
Pick Start Point
Chọn điểm đầu
+
+
+ Make False, to prevent operation from generating code
+ Làm Sai, để ngăn chặn hoạt động tạo mã
+
+
+
+ The base geometry for this operation
+ Hình dạng cơ sở cho hoạt động này
+
+
+
+ Holds the calculated value for the StartDepth
+ Cố định giá trị được tính cho Độ sâu đầu tiên
+
+
+
+ Holds the calculated value for the FinalDepth
+ Cố định giá trị được tính cho Độ sâu cuối cùng
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ An optional comment for this Operation
+ Một chú thích tùy chọn cho hoạt động này
+
+
+
+ User Assigned Label
+ Nhãn được gán cho người dùng
+
+
+
+ Base locations for this operation
+ Vị trí cơ sở cho hoạt động này
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Bắt đầu chiều sâu của công cụ - mặt cắt đầu tiên ở độ sâu Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Độ sâu cuối cùng của công cụ - giá trị thấp nhất theo trục z
+
+
+
+ Starting Depth internal use only for derived values
+ Starting Depth internal use only for derived values
+
+
+
+ Incremental Step Down of Tool
+ Công cụ gia tăng bước xuống
+
+
+
+ Maximum material removed on final pass.
+ Lượng vật liệu tối đa bị loại bỏ ở lần kiểm tra cuối cùng.
+
+
+
+ The height needed to clear clamps and obstructions
+ Chiều cao cần thiết để xóa kẹp và vật cản
+
+
+
+ Rapid Safety Height between locations.
+ Chiều cao an toàn nhanh chóng giữa các vị trí.
+
+
+
+ The start point of this path
+ Điểm đầu của đường dẫn này
+
+
+
+ Make True, if specifying a Start Point
+ Thực hiện đúng, nếu chỉ định điểm đầu
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Job Cycle Time Estimation
Job Cycle Time Estimation
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
PathPlane
@@ -1735,29 +1972,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Final depth set below ZMin of face(s) selected.
-
- PathPocketShape
-
-
- Default length of extensions.
- Default length of extensions.
-
-
-
- List of features to extend.
- List of features to extend.
-
-
-
- When enabled connected extension edges are combined to wires.
- When enabled connected extension edges are combined to wires.
-
-
-
- Uses the outline of the base geometry.
- Uses the outline of the base geometry.
-
-
PathProfile
@@ -1831,34 +2045,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
For open edges, verify Final Depth for this operation.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Edit PropertyBag
-
-
-
- Create PropertyBag
- Create PropertyBag
-
-
-
- PropertyBag
- PropertyBag
-
-
-
- Creates an object which can be used to store reference properties.
- Creates an object which can be used to store reference properties.
-
-
-
- List of custom property groups
- List of custom property groups
-
-
PathSlot
@@ -2885,59 +3071,69 @@ If it is necessary to set the FinalDepth manually please select a different oper
Angle of ramp.
Góc dốc.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ Xoắn ốc
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ Tùy chọn
+
RampEntry Dress-up
Kết cấu làn xe vào
+
+
+ Please select one path object
+ Vui lòng chọn một đối tượng đường dẫn
+
+
+
+ The selected object is not a path
+ Đối tượng được chọn không phải là đường dẫn
+
+
+
+ Please select a Profile object
+ Hãy chọn một đối tượng cấu hình
+
Path_DressupTag
-
-
- The base path to modify
- Đường cơ sở để sửa đổi
-
-
-
- Width of tags.
- Chiều rộng của thẻ.
-
-
-
- Height of tags.
- Chiều cao của thẻ.
-
-
-
- Angle of tag plunge and ascent.
- Góc của thẻ giảm xuống và tăng lên.
-
-
-
- Radius of the fillet for the tag.
- Bán kính của phần làm tròn cho thẻ.
-
-
-
- Locations of inserted holding tags
- Locations of inserted holding tags
-
-
-
- IDs of disabled holding tags
- IDs of disabled holding tags
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Factor determining the # of segments used to approximate rounded tags.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Cannot insert holding tags for this path - please select a Profile path
-
The selected object is not a path
@@ -2983,6 +3179,46 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Tag Dress-up
Tạo kết cấu Thẻ
+
+
+ The base path to modify
+ Đường cơ sở để sửa đổi
+
+
+
+ Width of tags.
+ Chiều rộng của thẻ.
+
+
+
+ Height of tags.
+ Chiều cao của thẻ.
+
+
+
+ Angle of tag plunge and ascent.
+ Góc của thẻ giảm xuống và tăng lên.
+
+
+
+ Radius of the fillet for the tag.
+ Bán kính của phần làm tròn cho thẻ.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Factor determining the # of segments used to approximate rounded tags.
+
No Base object found.
@@ -3003,6 +3239,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Base Path is empty.
Đường dẫn cơ sở trống.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Cannot insert holding tags for this path - please select a Profile path
+
Path_DressupZCorrect
@@ -3096,6 +3337,19 @@ If it is necessary to set the FinalDepth manually please select a different oper
Engraving Operations
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Xuất bản mẫu
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Xuất Công việc Đường dẫn như là một mẫu được sử dụng cho các công việc khác
+
+
Path_Helix
@@ -3192,6 +3446,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
Exports Path Job as a template to be used for other jobs
Xuất Công việc Đường dẫn như là một mẫu được sử dụng cho các công việc khác
+
+
+ Edit
+ Chỉnh sửa
+
+
+
+ Stock not a cylinder!
+ Hàng dự trữ không phải là một hình trụ!
+
Edit Job
@@ -3212,6 +3476,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
All Files (*.*)
Tất cả các tệp (*.*)
+
+
+ Unsupported stock object %s
+ Đối tượng dự trữ không được hỗ trợ %s
+
+
+
+ Unsupported stock type %s (%d)
+ Loại hàng dự trữ không được hỗ trợ %s (%d)
+
Model Selection
@@ -3222,6 +3496,71 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Job
Tạo Công việc
+
+
+ Fixture
+ Tệp đính kèm
+
+
+
+ Tool
+ Công cụ
+
+
+
+ Operation
+ Operation
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ Đặc
+
+
+
+ Jobs
+ Công việc
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Cơ sở -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Hộp: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Hình trụ: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Loai hàng dự trữ không được hỗ trợ
+
Path_MillFace
@@ -3244,6 +3583,24 @@ If it is necessary to set the FinalDepth manually please select a different oper
Toggle the Active State of the Operation
+
+ Path_Operation
+
+
+ None
+ Không
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3453,6 +3810,14 @@ If it is necessary to set the FinalDepth manually please select a different oper
Profile entire model, selected face(s) or selected edge(s)
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
@@ -3763,6 +4128,136 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Tùy chọn
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Đường thẳng
+
+
+
+ Offset
+ Offset
+
+
+
+ Spiral
+ Hình xoắn ốc
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ None
+ Không
+
+
+
+ Only
+ Only
+
+
+
+ First
+ First
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ Có mặt phẳng
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -4015,6 +4510,183 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create a Waterline Operation from a model
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ Thao tác này yêu cầu cài đặt OpenCamLib.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ Tùy chọn
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ Đường thẳng
+
+
+
+ Offset
+ Offset
+
+
+
+ Spiral
+ Hình xoắn ốc
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ None
+ Không
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Chỉnh sửa thẻ lưu giữ thiết kế áo đường
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ When enabled connected extension edges are combined to wires.
+
+
+
+ Uses the outline of the base geometry.
+ Uses the outline of the base geometry.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Edit PropertyBag
+
+
+
+ Create PropertyBag
+ Create PropertyBag
+
+
+
+ PropertyBag
+ PropertyBag
+
+
+
+ Creates an object which can be used to store reference properties.
+ Creates an object which can be used to store reference properties.
+
+
+
+ List of custom property groups
+ List of custom property groups
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.qm b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.qm
index 003f490e82..903fb0cefd 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.qm and b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts
index 32804e3d28..a924c8b035 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts
@@ -213,6 +213,16 @@
The Z height of the hop
跃点的 Z 高度
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
Stop processing
@@ -243,6 +253,111 @@
The output location for the probe data to be written
要写入的探针数据的输出位置
+
+
+ The base geometry for this operation
+ 此操作的基本几何图形
+
+
+
+ Holds the calculated value for the StartDepth
+ 保存起始深度的计算值
+
+
+
+ Holds the calculated value for the FinalDepth
+ 保存终止深度的计算值
+
+
+
+ Holds the diameter of the tool
+ 保存刀具的直径
+
+
+
+ Holds the max Z value of Stock
+ 保持工件最大Z值
+
+
+
+ Holds the min Z value of Stock
+ 保持工件最小Z值
+
+
+
+ Make False, to prevent operation from generating code
+ 使假，以防止生成代码操作
+
+
+
+ An optional comment for this Operation
+ 此操作的可选注释
+
+
+
+ User Assigned Label
+ 用户指定的标签
+
+
+
+ Operations Cycle Time Estimation
+ 操作周期时间估计
+
+
+
+ Base locations for this operation
+ 此操作的基本位置
+
+
+
+ Coolant mode for this operation
+ 此操作的冷却模式
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ 刀具起始深度 (Z)
+
+
+
+ Final Depth of Tool- lowest value in Z
+ 刀具的最终深度-Z向最低值
+
+
+
+ Incremental Step Down of Tool
+ 逐步降低工具
+
+
+
+ Maximum material removed on final pass.
+ 在最后的成品上去除的最大材料。
+
+
+
+ Rapid Safety Height between locations.
+ 位置之间快速前进的安全高度。
+
+
+
+ The start point of this path
+ 此路径的起点
+
+
+
+ Lower limit of the turning diameter
+ 车削直径下限
+
+
+
+ Upper limit of the turning diameter.
+ 车削直径上限.
+
+
+
+ Coolant option for this operation
+ 此操作的冷却选项
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
夹具偏移数
-
-
- Make False, to prevent operation from generating code
- 使假，以防止生成代码操作
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
要插入的G代码
+
+
+ Angle of ramp.
+ 斜坡角度。
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
自定义进给率
+
+
+ Width of tags.
+ 掰断留料的宽度。
+
+
+
+ Height of tags.
+ 掰断留料的高度。
+
+
+
+ Angle of tag plunge and ascent.
+ 下角标和上角标的角度。
+
+
+
+ Radius of the fillet for the tag.
+ 掰断留料的圆角半径。
+
+
+
+ Locations of inserted holding tags
+ 插入的掰断留料位置
+
+
+
+ IDs of disabled holding tags
+ 禁用的掰断留料的id
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expression used for StepDown of new operations.
-
-
- Start pocketing at center or boundary
- 在中心或边界开始隐藏
-
-
-
- Percent of cutter diameter to step over on each pass
- 路径彼此相对于刀具直径重叠率
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
要应用于操作的额外偏移量。方向与操作相关。
+
+
+ Start pocketing at center or boundary
+ 在中心或边界开始隐藏
+
+
+
+ Percent of cutter diameter to step over on each pass
+ 路径彼此相对于刀具直径重叠率
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
试图避免不必要的撤销。
+
+
+ The side of path to insert bones
+ 插入连杆的路径的一侧
+
+
+
+ The style of bones
+ 连杆样式
+
+
+
+ Bones that aren't dressed up
+ 未修整的连杆
+
+
+
+ The algorithm to determine the bone length
+ 确定连杆长度的算法
+
+
+
+ Dressup length if Incision == custom
+ 修整长度, 如果切口 = = 自定义
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ List of custom property groups
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
此控制器使用的工具
+
+
+ List of disabled features
+ 禁用的功能列表
+
+
+
+ The NC output file for this project
+ 此项目的 NC 输出文件
+
+
+
+ Select the Post Processor
+ 选择后处理器
+
+
+
+ Last Time the Job was post-processed
+ 上次对作业进行后处理的时间
+
+
+
+ An optional description for this job
+ 此项目的可选说明
+
+
+
+ Job Cycle Time Estimation
+ 操作周期时间估计
+
+
+
+ Solid object to be used as stock.
+ 所要用作工件的实体对象。
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ 分割输出到多个gcode 文件
+
+
+
+ If multiple WCS, order the output this way
+ 如果多个WCS，按这种方式排序输出
+
+
+
+ The Work Coordinate Systems for the Job
+ 作业的工作坐标系
+
+
+
+ SetupSheet holding the settings for this job
+ 保存此作业设置的设置表
+
+
+
+ The base objects for all operations
+ 所有操作的基本对象
+
+
+
+ Collection of all tool controllers for the job
+ 作业的所有刀具控制器的集合
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
找不到作业 %s
+
+
+ Illegal arc: Start and end radii not equal
+ Illegal arc: Start and end radii not equal
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
Selected tool is not a drill
-
-
- Illegal arc: Start and end radii not equal
- Illegal arc: Start and end radii not equal
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
逆时针
-
-
- List of disabled features
- 禁用的功能列表
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utils
+
+
+ List of disabled features
+ 禁用的功能列表
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
沿边或面创建去毛刺路径
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- 编辑掰断留料修饰
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- 不受支持的工件对象%s
-
-
-
- Unsupported stock type %s (%d)
- 不支持的工件类型 %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
工件不是一个圆柱体!
+
+
+ Unsupported stock object %s
+ 不受支持的工件对象%s
+
+
+
+ Unsupported stock type %s (%d)
+ 不支持的工件类型 %s (%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
所要用作工件的实体对象。
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- 分割输出到多个gcode 文件
-
-
-
- If multiple WCS, order the output this way
- 如果多个WCS，按这种方式排序输出
-
-
-
- The Work Coordinate Systems for the Job
- 作业的工作坐标系
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
作业的所有刀具控制器的集合
+
+
+ The Work Coordinate Systems for the Job
+ 作业的工作坐标系
+
+
+
+ If multiple WCS, order the output this way
+ 如果多个WCS，按这种方式排序输出
+
+
+
+ Split output into multiple gcode files
+ 分割输出到多个gcode 文件
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- 此操作的基本几何图形
-
-
-
- Holds the calculated value for the StartDepth
- 保存起始深度的计算值
-
-
-
- Holds the calculated value for the FinalDepth
- 保存终止深度的计算值
-
-
-
- Holds the diameter of the tool
- 保存刀具的直径
-
-
-
- Holds the max Z value of Stock
- 保持工件最大Z值
-
-
-
- Holds the min Z value of Stock
- 保持工件最小Z值
-
-
-
- Make False, to prevent operation from generating code
- 使假，以防止生成代码操作
-
-
-
- An optional comment for this Operation
- 此操作的可选注释
-
-
-
- User Assigned Label
- 用户指定的标签
-
-
-
- Operations Cycle Time Estimation
- 操作周期时间估计
-
-
-
- Base locations for this operation
- 此操作的基本位置
-
-
-
- Coolant mode for this operation
- 此操作的冷却模式
-
-
-
- Starting Depth of Tool- first cut depth in Z
- 刀具起始深度 (Z)
-
-
-
- Final Depth of Tool- lowest value in Z
- 刀具的最终深度-Z向最低值
-
-
-
- Starting Depth internal use only for derived values
- 仅对派生值起始深度内部使用
-
-
-
- Incremental Step Down of Tool
- 逐步降低工具
-
-
-
- Maximum material removed on final pass.
- 在最后的成品上去除的最大材料。
-
-
-
- The height needed to clear clamps and obstructions
- 避让夹具和障碍物所需的高度
-
-
-
- Rapid Safety Height between locations.
- 位置之间快速前进的安全高度。
-
-
-
- The start point of this path
- 此路径的起点
-
-
-
- Make True, if specifying a Start Point
- 如果指定起始点, 则为 True
-
-
-
- Lower limit of the turning diameter
- 车削直径下限
-
-
-
- Upper limit of the turning diameter.
- 车削直径上限.
-
-
-
- Coolant option for this operation
- 此操作的冷却选项
-
Edit
@@ -1667,11 +1784,131 @@ If it is necessary to set the FinalDepth manually please select a different oper
Pick Start Point
选取起点
+
+
+ Make False, to prevent operation from generating code
+ 使假，以防止生成代码操作
+
+
+
+ The base geometry for this operation
+ 此操作的基本几何图形
+
+
+
+ Holds the calculated value for the StartDepth
+ 保存起始深度的计算值
+
+
+
+ Holds the calculated value for the FinalDepth
+ 保存终止深度的计算值
+
+
+
+ Holds the diameter of the tool
+ 保存刀具的直径
+
+
+
+ Holds the max Z value of Stock
+ 保持工件最大Z值
+
+
+
+ Holds the min Z value of Stock
+ 保持工件最小Z值
+
+
+
+ An optional comment for this Operation
+ 此操作的可选注释
+
+
+
+ User Assigned Label
+ 用户指定的标签
+
+
+
+ Base locations for this operation
+ 此操作的基本位置
+
+
+
+ Coolant mode for this operation
+ 此操作的冷却模式
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ 刀具起始深度 (Z)
+
+
+
+ Final Depth of Tool- lowest value in Z
+ 刀具的最终深度-Z向最低值
+
+
+
+ Starting Depth internal use only for derived values
+ 仅对派生值起始深度内部使用
+
+
+
+ Incremental Step Down of Tool
+ 逐步降低工具
+
+
+
+ Maximum material removed on final pass.
+ 在最后的成品上去除的最大材料。
+
+
+
+ The height needed to clear clamps and obstructions
+ 避让夹具和障碍物所需的高度
+
+
+
+ Rapid Safety Height between locations.
+ 位置之间快速前进的安全高度。
+
+
+
+ The start point of this path
+ 此路径的起点
+
+
+
+ Make True, if specifying a Start Point
+ 如果指定起始点, 则为 True
+
+
+
+ Lower limit of the turning diameter
+ 车削直径下限
+
+
+
+ Upper limit of the turning diameter.
+ 车削直径上限.
+
+
+
+ Coolant option for this operation
+ 此操作的冷却选项
+
Job Cycle Time Estimation
操作周期时间估计
+
+
+ Operations Cycle Time Estimation
+ 操作周期时间估计
+
PathPlane
@@ -1734,29 +1971,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Final depth set below ZMin of face(s) selected.
-
- PathPocketShape
-
-
- Default length of extensions.
- Default length of extensions.
-
-
-
- List of features to extend.
- List of features to extend.
-
-
-
- When enabled connected extension edges are combined to wires.
- When enabled connected extension edges are combined to wires.
-
-
-
- Uses the outline of the base geometry.
- Uses the outline of the base geometry.
-
-
PathProfile
@@ -1830,34 +2044,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
For open edges, verify Final Depth for this operation.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Edit PropertyBag
-
-
-
- Create PropertyBag
- Create PropertyBag
-
-
-
- PropertyBag
- 制表符檐
-
-
-
- Creates an object which can be used to store reference properties.
- Creates an object which can be used to store reference properties.
-
-
-
- List of custom property groups
- List of custom property groups
-
-
PathSlot
@@ -2884,59 +3070,69 @@ If it is necessary to set the FinalDepth manually please select a different oper
Angle of ramp.
斜坡角度。
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ 螺旋体
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ 自定义
+
RampEntry Dress-up
斜切修饰
+
+
+ Please select one path object
+ 请选择一个路径对象
+
+
+
+ The selected object is not a path
+ 所选对象不是路径
+
+
+
+ Please select a Profile object
+ 请选择一个轮廓对象
+
Path_DressupTag
-
-
- The base path to modify
- 要修改的基路径
-
-
-
- Width of tags.
- 掰断留料的宽度。
-
-
-
- Height of tags.
- 掰断留料的高度。
-
-
-
- Angle of tag plunge and ascent.
- 下角标和上角标的角度。
-
-
-
- Radius of the fillet for the tag.
- 掰断留料的圆角半径。
-
-
-
- Locations of inserted holding tags
- 插入的掰断留料位置
-
-
-
- IDs of disabled holding tags
- 禁用的掰断留料的id
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- 用于近似四舍五入标签的段数的系数。
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- 无法为该路径插入掰断留料-请选择轮廓路径
-
The selected object is not a path
@@ -2982,6 +3178,46 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Tag Dress-up
创建标签修饰
+
+
+ The base path to modify
+ 要修改的基路径
+
+
+
+ Width of tags.
+ 掰断留料的宽度。
+
+
+
+ Height of tags.
+ 掰断留料的高度。
+
+
+
+ Angle of tag plunge and ascent.
+ 下角标和上角标的角度。
+
+
+
+ Radius of the fillet for the tag.
+ 掰断留料的圆角半径。
+
+
+
+ Locations of inserted holding tags
+ 插入的掰断留料位置
+
+
+
+ IDs of disabled holding tags
+ 禁用的掰断留料的id
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ 用于近似四舍五入标签的段数的系数。
+
No Base object found.
@@ -3002,6 +3238,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Base Path is empty.
基本路径为空。
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ 无法为该路径插入掰断留料-请选择轮廓路径
+
Path_DressupZCorrect
@@ -3095,6 +3336,19 @@ If it is necessary to set the FinalDepth manually please select a different oper
雕刻作业
+
+ Path_ExportTemplate
+
+
+ Export Template
+ 导出模板
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ 将路径作业导出为用于其他作业的模板
+
+
Path_Helix
@@ -3191,6 +3445,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
Exports Path Job as a template to be used for other jobs
将路径作业导出为用于其他作业的模板
+
+
+ Edit
+ 编辑
+
+
+
+ Stock not a cylinder!
+ 工件不是一个圆柱体!
+
Edit Job
@@ -3211,6 +3475,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
All Files (*.*)
所有文件(*.*)
+
+
+ Unsupported stock object %s
+ 不受支持的工件对象%s
+
+
+
+ Unsupported stock type %s (%d)
+ 不支持的工件类型 %s (%d)
+
Model Selection
@@ -3221,6 +3495,71 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Job
创建作业
+
+
+ Fixture
+ 夹具
+
+
+
+ Tool
+ 工具
+
+
+
+ Operation
+ 操作
+
+
+
+ 2D
+ 二维
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ 实体
+
+
+
+ Jobs
+ 任务
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ 基/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ 长方体: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ 圆柱体: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ 不支持的工件类型
+
Path_MillFace
@@ -3243,6 +3582,24 @@ If it is necessary to set the FinalDepth manually please select a different oper
切换操作的活动状态
+
+ Path_Operation
+
+
+ None
+ 无
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3452,6 +3809,14 @@ If it is necessary to set the FinalDepth manually please select a different oper
Profile entire model, selected face(s) or selected edge(s)
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ 制表符檐
+
+
Path_Sanity
@@ -3762,6 +4127,136 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ 自定义
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ Circular
+ 环形
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ 线
+
+
+
+ Offset
+ 偏移
+
+
+
+ Spiral
+ 螺旋
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Y
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ 多路径
+
+
+
+ None
+ 无
+
+
+
+ Only
+ Only
+
+
+
+ First
+ First
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ 平面
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -4014,6 +4509,183 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create a Waterline Operation from a model
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ 此操作需要安装 OpenCamLib。
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ 自定义
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ 环形
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ 线
+
+
+
+ Offset
+ 偏移
+
+
+
+ Spiral
+ 螺旋
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ None
+ 无
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ 多路径
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ 编辑掰断留料修饰
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ When enabled connected extension edges are combined to wires.
+
+
+
+ Uses the outline of the base geometry.
+ Uses the outline of the base geometry.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Edit PropertyBag
+
+
+
+ Create PropertyBag
+ Create PropertyBag
+
+
+
+ PropertyBag
+ 制表符檐
+
+
+
+ Creates an object which can be used to store reference properties.
+ Creates an object which can be used to store reference properties.
+
+
+
+ List of custom property groups
+ List of custom property groups
+
+
PathEngrave
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.qm b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.qm
index 011c3ffa3b..cc764b695d 100644
Binary files a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.qm and b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.qm differ
diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts
index 79fb09ff43..a6c32adb2c 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts
@@ -213,6 +213,16 @@
The Z height of the hop
The Z height of the hop
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
Stop processing
@@ -243,6 +253,111 @@
The output location for the probe data to be written
The output location for the probe data to be written
+
+
+ The base geometry for this operation
+ The base geometry for this operation
+
+
+
+ Holds the calculated value for the StartDepth
+ Holds the calculated value for the StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Holds the calculated value for the FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ Make False, to prevent operation from generating code
+ Make False, to prevent operation from generating code
+
+
+
+ An optional comment for this Operation
+ An optional comment for this Operation
+
+
+
+ User Assigned Label
+ User Assigned Label
+
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
+
+
+ Base locations for this operation
+ Base locations for this operation
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Starting Depth of Tool- first cut depth in Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Final Depth of Tool- lowest value in Z
+
+
+
+ Incremental Step Down of Tool
+ Incremental Step Down of Tool
+
+
+
+ Maximum material removed on final pass.
+ 通過最後檢查之最大移除材料量
+
+
+
+ Rapid Safety Height between locations.
+ Rapid Safety Height between locations.
+
+
+
+ The start point of this path
+ The start point of this path
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Additional base objects to be engraved
@@ -333,11 +448,6 @@
Fixture Offset Number
Fixture Offset Number
-
-
- Make False, to prevent operation from generating code
- Make False, to prevent operation from generating code
-
Shape for bit shape
@@ -368,6 +478,11 @@
The gcode to be inserted
The gcode to be inserted
+
+
+ Angle of ramp.
+ Angle of ramp.
+
Ramping Method
@@ -383,6 +498,36 @@
Custom feed rate
Custom feed rate
+
+
+ Width of tags.
+ Width of tags.
+
+
+
+ Height of tags.
+ Height of tags.
+
+
+
+ Angle of tag plunge and ascent.
+ Angle of tag plunge and ascent.
+
+
+
+ Radius of the fillet for the tag.
+ Radius of the fillet for the tag.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
Incremental Drill depth before retracting to clear chips
@@ -568,16 +713,6 @@
Expression used for StepDown of new operations.
Expression used for StepDown of new operations.
-
-
- Start pocketing at center or boundary
- Start pocketing at center or boundary
-
-
-
- Percent of cutter diameter to step over on each pass
- Percent of cutter diameter to step over on each pass
-
The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW)
@@ -588,6 +723,16 @@
Extra offset to apply to the operation. Direction is operation dependent.
Extra offset to apply to the operation. Direction is operation dependent.
+
+
+ Start pocketing at center or boundary
+ Start pocketing at center or boundary
+
+
+
+ Percent of cutter diameter to step over on each pass
+ Percent of cutter diameter to step over on each pass
+
Angle of the zigzag pattern
@@ -608,6 +753,31 @@
Attempts to avoid unnecessary retractions.
Attempts to avoid unnecessary retractions.
+
+
+ The side of path to insert bones
+ The side of path to insert bones
+
+
+
+ The style of bones
+ The style of bones
+
+
+
+ Bones that aren't dressed up
+ Bones that aren't dressed up
+
+
+
+ The algorithm to determine the bone length
+ The algorithm to determine the bone length
+
+
+
+ Dressup length if Incision == custom
+ Dressup length if Incision == custom
+
Add Optional or Mandatory Stop to the program
@@ -678,6 +848,11 @@
Seed value for jitter randomness
Seed value for jitter randomness
+
+
+ List of custom property groups
+ List of custom property groups
+
The point file from the surface probing.
@@ -848,6 +1023,76 @@
The tool used by this controller
該工具用於此控制器
+
+
+ List of disabled features
+ List of disabled features
+
+
+
+ The NC output file for this project
+ 此專案的 NC 輸出檔案
+
+
+
+ Select the Post Processor
+ 選擇一個後處理器
+
+
+
+ Last Time the Job was post-processed
+ Last Time the Job was post-processed
+
+
+
+ An optional description for this job
+ An optional description for this job
+
+
+
+ Job Cycle Time Estimation
+ Job Cycle Time Estimation
+
+
+
+ Solid object to be used as stock.
+ Solid object to be used as stock.
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ SetupSheet holding the settings for this job
+ SetupSheet holding the settings for this job
+
+
+
+ The base objects for all operations
+ The base objects for all operations
+
+
+
+ Collection of all tool controllers for the job
+ Collection of all tool controllers for the job
+
Start cutting from the inside or outside
@@ -941,6 +1186,11 @@
Didn't find job %s
Didn't find job %s
+
+
+ Illegal arc: Start and end radii not equal
+ Illegal arc: Start and end radii not equal
+
Legacy Tools not supported
@@ -951,11 +1201,6 @@
Selected tool is not a drill
Selected tool is not a drill
-
-
- Illegal arc: Start and end radii not equal
- Illegal arc: Start and end radii not equal
-
Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
@@ -1036,11 +1281,6 @@
CCW
CCW
-
-
- List of disabled features
- List of disabled features
-
Project Setup
@@ -1101,6 +1341,11 @@
Utils
Utils
+
+
+ List of disabled features
+ List of disabled features
+
Choose a writable location for your toolbits
@@ -1241,14 +1486,6 @@
Creates a Deburr Path along Edges or around Faces
-
- PathDressup_HoldingTags
-
-
- Edit HoldingTags Dress-up
- Edit HoldingTags Dress-up
-
-
PathFeatureExtensions
@@ -1338,16 +1575,6 @@
PathJob
-
-
- Unsupported stock object %s
- Unsupported stock object %s
-
-
-
- Unsupported stock type %s (%d)
- Unsupported stock type %s (%d)
-
Stock not from Base bound box!
@@ -1363,6 +1590,16 @@
Stock not a cylinder!
Stock not a cylinder!
+
+
+ Unsupported stock object %s
+ Unsupported stock object %s
+
+
+
+ Unsupported stock type %s (%d)
+ Unsupported stock type %s (%d)
+
The NC output file for this project
@@ -1393,26 +1630,6 @@
Solid object to be used as stock.
Solid object to be used as stock.
-
-
- Select the Type of Job
- Select the Type of Job
-
-
-
- Split output into multiple gcode files
- Split output into multiple gcode files
-
-
-
- If multiple WCS, order the output this way
- If multiple WCS, order the output this way
-
-
-
- The Work Coordinate Systems for the Job
- The Work Coordinate Systems for the Job
-
SetupSheet holding the settings for this job
@@ -1428,6 +1645,26 @@
Collection of all tool controllers for the job
Collection of all tool controllers for the job
+
+
+ The Work Coordinate Systems for the Job
+ The Work Coordinate Systems for the Job
+
+
+
+ If multiple WCS, order the output this way
+ If multiple WCS, order the output this way
+
+
+
+ Split output into multiple gcode files
+ Split output into multiple gcode files
+
+
+
+ Select the Type of Job
+ Select the Type of Job
+
Unsupported PathJob template version %s
@@ -1471,126 +1708,6 @@
PathOp
-
-
- The base geometry for this operation
- The base geometry for this operation
-
-
-
- Holds the calculated value for the StartDepth
- Holds the calculated value for the StartDepth
-
-
-
- Holds the calculated value for the FinalDepth
- Holds the calculated value for the FinalDepth
-
-
-
- Holds the diameter of the tool
- Holds the diameter of the tool
-
-
-
- Holds the max Z value of Stock
- Holds the max Z value of Stock
-
-
-
- Holds the min Z value of Stock
- Holds the min Z value of Stock
-
-
-
- Make False, to prevent operation from generating code
- Make False, to prevent operation from generating code
-
-
-
- An optional comment for this Operation
- An optional comment for this Operation
-
-
-
- User Assigned Label
- User Assigned Label
-
-
-
- Operations Cycle Time Estimation
- Operations Cycle Time Estimation
-
-
-
- Base locations for this operation
- Base locations for this operation
-
-
-
- Coolant mode for this operation
- Coolant mode for this operation
-
-
-
- Starting Depth of Tool- first cut depth in Z
- Starting Depth of Tool- first cut depth in Z
-
-
-
- Final Depth of Tool- lowest value in Z
- Final Depth of Tool- lowest value in Z
-
-
-
- Starting Depth internal use only for derived values
- Starting Depth internal use only for derived values
-
-
-
- Incremental Step Down of Tool
- Incremental Step Down of Tool
-
-
-
- Maximum material removed on final pass.
- 通過最後檢查之最大移除材料量
-
-
-
- The height needed to clear clamps and obstructions
- The height needed to clear clamps and obstructions
-
-
-
- Rapid Safety Height between locations.
- Rapid Safety Height between locations.
-
-
-
- The start point of this path
- The start point of this path
-
-
-
- Make True, if specifying a Start Point
- Make True, if specifying a Start Point
-
-
-
- Lower limit of the turning diameter
- Lower limit of the turning diameter
-
-
-
- Upper limit of the turning diameter.
- Upper limit of the turning diameter.
-
-
-
- Coolant option for this operation
- Coolant option for this operation
-
Edit
@@ -1668,11 +1785,131 @@ If it is necessary to set the FinalDepth manually please select a different oper
Pick Start Point
Pick Start Point
+
+
+ Make False, to prevent operation from generating code
+ Make False, to prevent operation from generating code
+
+
+
+ The base geometry for this operation
+ The base geometry for this operation
+
+
+
+ Holds the calculated value for the StartDepth
+ Holds the calculated value for the StartDepth
+
+
+
+ Holds the calculated value for the FinalDepth
+ Holds the calculated value for the FinalDepth
+
+
+
+ Holds the diameter of the tool
+ Holds the diameter of the tool
+
+
+
+ Holds the max Z value of Stock
+ Holds the max Z value of Stock
+
+
+
+ Holds the min Z value of Stock
+ Holds the min Z value of Stock
+
+
+
+ An optional comment for this Operation
+ An optional comment for this Operation
+
+
+
+ User Assigned Label
+ User Assigned Label
+
+
+
+ Base locations for this operation
+ Base locations for this operation
+
+
+
+ Coolant mode for this operation
+ Coolant mode for this operation
+
+
+
+ Starting Depth of Tool- first cut depth in Z
+ Starting Depth of Tool- first cut depth in Z
+
+
+
+ Final Depth of Tool- lowest value in Z
+ Final Depth of Tool- lowest value in Z
+
+
+
+ Starting Depth internal use only for derived values
+ Starting Depth internal use only for derived values
+
+
+
+ Incremental Step Down of Tool
+ Incremental Step Down of Tool
+
+
+
+ Maximum material removed on final pass.
+ 通過最後檢查之最大移除材料量
+
+
+
+ The height needed to clear clamps and obstructions
+ The height needed to clear clamps and obstructions
+
+
+
+ Rapid Safety Height between locations.
+ Rapid Safety Height between locations.
+
+
+
+ The start point of this path
+ The start point of this path
+
+
+
+ Make True, if specifying a Start Point
+ Make True, if specifying a Start Point
+
+
+
+ Lower limit of the turning diameter
+ Lower limit of the turning diameter
+
+
+
+ Upper limit of the turning diameter.
+ Upper limit of the turning diameter.
+
+
+
+ Coolant option for this operation
+ Coolant option for this operation
+
Job Cycle Time Estimation
Job Cycle Time Estimation
+
+
+ Operations Cycle Time Estimation
+ Operations Cycle Time Estimation
+
PathPlane
@@ -1735,29 +1972,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Final depth set below ZMin of face(s) selected.
-
- PathPocketShape
-
-
- Default length of extensions.
- Default length of extensions.
-
-
-
- List of features to extend.
- List of features to extend.
-
-
-
- When enabled connected extension edges are combined to wires.
- When enabled connected extension edges are combined to wires.
-
-
-
- Uses the outline of the base geometry.
- Uses the outline of the base geometry.
-
-
PathProfile
@@ -1831,34 +2045,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
For open edges, verify Final Depth for this operation.
-
- PathPropertyBag
-
-
- Edit PropertyBag
- Edit PropertyBag
-
-
-
- Create PropertyBag
- Create PropertyBag
-
-
-
- PropertyBag
- PropertyBag
-
-
-
- Creates an object which can be used to store reference properties.
- Creates an object which can be used to store reference properties.
-
-
-
- List of custom property groups
- List of custom property groups
-
-
PathSlot
@@ -2885,59 +3071,69 @@ If it is necessary to set the FinalDepth manually please select a different oper
Angle of ramp.
Angle of ramp.
+
+
+ RampMethod1
+ RampMethod1
+
+
+
+ RampMethod2
+ RampMethod2
+
+
+
+ RampMethod3
+ RampMethod3
+
+
+
+ Helix
+ 螺旋
+
+
+
+ Horizontal Feed Rate
+ Horizontal Feed Rate
+
+
+
+ Vertical Feed Rate
+ Vertical Feed Rate
+
+
+
+ Ramp Feed Rate
+ Ramp Feed Rate
+
+
+
+ Custom
+ 自訂
+
RampEntry Dress-up
RampEntry Dress-up
+
+
+ Please select one path object
+ Please select one path object
+
+
+
+ The selected object is not a path
+ The selected object is not a path
+
+
+
+ Please select a Profile object
+ Please select a Profile object
+
Path_DressupTag
-
-
- The base path to modify
- The base path to modify
-
-
-
- Width of tags.
- Width of tags.
-
-
-
- Height of tags.
- Height of tags.
-
-
-
- Angle of tag plunge and ascent.
- Angle of tag plunge and ascent.
-
-
-
- Radius of the fillet for the tag.
- Radius of the fillet for the tag.
-
-
-
- Locations of inserted holding tags
- Locations of inserted holding tags
-
-
-
- IDs of disabled holding tags
- IDs of disabled holding tags
-
-
-
- Factor determining the # of segments used to approximate rounded tags.
- Factor determining the # of segments used to approximate rounded tags.
-
-
-
- Cannot insert holding tags for this path - please select a Profile path
- Cannot insert holding tags for this path - please select a Profile path
-
The selected object is not a path
@@ -2983,6 +3179,46 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Tag Dress-up
Create Tag Dress-up
+
+
+ The base path to modify
+ The base path to modify
+
+
+
+ Width of tags.
+ Width of tags.
+
+
+
+ Height of tags.
+ Height of tags.
+
+
+
+ Angle of tag plunge and ascent.
+ Angle of tag plunge and ascent.
+
+
+
+ Radius of the fillet for the tag.
+ Radius of the fillet for the tag.
+
+
+
+ Locations of inserted holding tags
+ Locations of inserted holding tags
+
+
+
+ IDs of disabled holding tags
+ IDs of disabled holding tags
+
+
+
+ Factor determining the # of segments used to approximate rounded tags.
+ Factor determining the # of segments used to approximate rounded tags.
+
No Base object found.
@@ -3003,6 +3239,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Base Path is empty.
Base Path is empty.
+
+
+ Cannot insert holding tags for this path - please select a Profile path
+ Cannot insert holding tags for this path - please select a Profile path
+
Path_DressupZCorrect
@@ -3096,6 +3337,19 @@ If it is necessary to set the FinalDepth manually please select a different oper
Engraving Operations
+
+ Path_ExportTemplate
+
+
+ Export Template
+ Export Template
+
+
+
+ Exports Path Job as a template to be used for other jobs
+ Exports Path Job as a template to be used for other jobs
+
+
Path_Helix
@@ -3192,6 +3446,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
Exports Path Job as a template to be used for other jobs
Exports Path Job as a template to be used for other jobs
+
+
+ Edit
+ 編輯
+
+
+
+ Stock not a cylinder!
+ Stock not a cylinder!
+
Edit Job
@@ -3212,6 +3476,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
All Files (*.*)
所有檔 (*.*)
+
+
+ Unsupported stock object %s
+ Unsupported stock object %s
+
+
+
+ Unsupported stock type %s (%d)
+ Unsupported stock type %s (%d)
+
Model Selection
@@ -3222,6 +3496,71 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Job
Create Job
+
+
+ Fixture
+ Fixture
+
+
+
+ Tool
+ 工具
+
+
+
+ Operation
+ Operation
+
+
+
+ 2D
+ 2D
+
+
+
+ 2.5D
+ 2.5D
+
+
+
+ Lathe
+ Lathe
+
+
+
+ Multiaxis
+ Multiaxis
+
+
+
+ Solids
+ 固體
+
+
+
+ Jobs
+ Jobs
+
+
+
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+ Base -/+ %.2f/%.2f %.2f/%.2f %.2f/%.2f
+
+
+
+ Box: %.2f x %.2f x %.2f
+ Box: %.2f x %.2f x %.2f
+
+
+
+ Cylinder: %.2f x %.2f
+ Cylinder: %.2f x %.2f
+
+
+
+ Unsupported stock type
+ Unsupported stock type
+
Path_MillFace
@@ -3244,6 +3583,24 @@ If it is necessary to set the FinalDepth manually please select a different oper
Toggle the Active State of the Operation
+
+ Path_Operation
+
+
+ None
+ 無
+
+
+
+ Flood
+ Flood
+
+
+
+ Mist
+ Mist
+
+
Path_OperationCopy
@@ -3453,6 +3810,14 @@ If it is necessary to set the FinalDepth manually please select a different oper
Profile entire model, selected face(s) or selected edge(s)
+
+ Path_PropertyBag
+
+
+ PropertyBag
+ PropertyBag
+
+
Path_Sanity
@@ -3763,6 +4128,136 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Surface
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ 自訂
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ 線
+
+
+
+ Offset
+ 偏移複製
+
+
+
+ Spiral
+ 螺旋
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ X
+ X
+
+
+
+ Y
+ Ÿ
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ None
+ 無
+
+
+
+ Only
+ Only
+
+
+
+ First
+ First
+
+
+
+ Last
+ Last
+
+
+
+ Planar
+ 平面
+
+
+
+ Rotational
+ Rotational
+
3D Surface
@@ -4015,6 +4510,183 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create a Waterline Operation from a model
+
+ path_waterline
+
+
+ This operation requires OpenCamLib to be installed.
+ This operation requires OpenCamLib to be installed.
+
+
+
+ OCL Dropcutter
+ OCL Dropcutter
+
+
+
+ Experimental
+ Experimental
+
+
+
+ BaseBoundBox
+ BaseBoundBox
+
+
+
+ Stock
+ Stock
+
+
+
+ CenterOfMass
+ CenterOfMass
+
+
+
+ CenterOfBoundBox
+ CenterOfBoundBox
+
+
+
+ XminYmin
+ XminYmin
+
+
+
+ Custom
+ 自訂
+
+
+
+ Off
+ Off
+
+
+
+ Circular
+ Circular
+
+
+
+ CircularZigZag
+ CircularZigZag
+
+
+
+ Line
+ 線
+
+
+
+ Offset
+ 偏移複製
+
+
+
+ Spiral
+ 螺旋
+
+
+
+ ZigZag
+ ZigZag
+
+
+
+ Conventional
+ Conventional
+
+
+
+ Climb
+ Climb
+
+
+
+ None
+ 無
+
+
+
+ Collectively
+ Collectively
+
+
+
+ Individually
+ Individually
+
+
+
+ Single-pass
+ Single-pass
+
+
+
+ Multi-pass
+ Multi-pass
+
+
+
+ PathDressup_HoldingTags
+
+
+ Edit HoldingTags Dress-up
+ Edit HoldingTags Dress-up
+
+
+
+ PathPocketShape
+
+
+ Default length of extensions.
+ Default length of extensions.
+
+
+
+ List of features to extend.
+ List of features to extend.
+
+
+
+ When enabled connected extension edges are combined to wires.
+ When enabled connected extension edges are combined to wires.
+
+
+
+ Uses the outline of the base geometry.
+ Uses the outline of the base geometry.
+
+
+
+ PathPropertyBag
+
+
+ Edit PropertyBag
+ Edit PropertyBag
+
+
+
+ Create PropertyBag
+ Create PropertyBag
+
+
+
+ PropertyBag
+ PropertyBag
+
+
+
+ Creates an object which can be used to store reference properties.
+ Creates an object which can be used to store reference properties.
+
+
+
+ List of custom property groups
+ List of custom property groups
+
+
PathEngrave
diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sl.qm b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sl.qm
index 82e7595230..12e4b8e2e5 100644
Binary files a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sl.qm and b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sl.qm differ
diff --git a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sl.ts b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sl.ts
index 3e65310907..7b3ef4f52b 100644
--- a/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sl.ts
+++ b/src/Mod/ReverseEngineering/Gui/Resources/translations/ReverseEngineering_sl.ts
@@ -24,7 +24,7 @@
Plane...
- Ravnina ...
+ Ravnina ...
Approximate a plane
@@ -84,7 +84,7 @@
Wire from mesh boundary...
- Žičje iz robov ploskovja ...
+ Črtovje iz robov ploskovja ...
Create wire from mesh boundaries
@@ -114,7 +114,7 @@
Mesh segmentation...
- Razčlenitev ploskovja ...
+ Razčlenitev ploskovja ...
Create mesh segments
@@ -144,7 +144,7 @@
Manual segmentation...
- Ročna razčlenitev ...
+ Ročna razčlenitev ...
Create mesh segments manually
diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm
index 09b4943a02..40e3e4f39d 100644
Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm differ
diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts
index bfcfc6cddb..37d99ad4d0 100644
--- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts
+++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts
@@ -1508,7 +1508,7 @@ Die Eigenschaft 'Support' wird gelöscht.
When in edit mode, stop the active operation (drawing, constraining, etc.).
- Beenden Sie im Bearbeitungsmodus die aktive Operation (Zeichnung, Einschränkung, etc.).
+ Beendet den aktiven Vorgang im Bearbeitungsmodus (Zeichnung, Einschränkung, etc.).
diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.qm
index dec39ec3e1..4a9afe338e 100644
Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.qm differ
diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts
index e5efd53382..ae0c9ad8d3 100644
--- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts
+++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts
@@ -11,7 +11,7 @@
Creates a hexagonal profile in the sketch
- Creates a hexagonal profile in the sketch
+ ესკიზში ექვსკუთხედი პროფილის შექმნა
@@ -32,7 +32,7 @@
Show/hide B-spline degree
- Show/hide B-spline degree
+ B-სპლაინის დონის ჩვენების ჩართ/გამორთ
@@ -71,7 +71,7 @@
Show/hide B-spline control polygon
- Show/hide B-spline control polygon
+ B-სპლაინის კონტროლის პოლიგონის ჩვენების ჩართ/გამორთ
@@ -128,12 +128,12 @@
Show/hide B-spline degree
- Show/hide B-spline degree
+ B-სპლაინის დონის ჩვენების ჩართ/გამორთ
Show/hide B-spline control polygon
- Show/hide B-spline control polygon
+ B-სპლაინის კონტროლის პოლიგონის ჩვენების ჩართ/გამორთ
@@ -261,7 +261,7 @@
Create a conic in the sketch
- Create a conic in the sketch
+ ესკიზზე კონუსის შექმნა
@@ -271,7 +271,7 @@
Ellipse by periapsis, apoapsis, minor radius
- Ellipse by periapsis, apoapsis, minor radius
+ ელიფსი პერიაფსისით, აპოაფსისით და მცირე რადიუსით
@@ -281,12 +281,12 @@
Arc of hyperbola by center, major radius, endpoints
- Arc of hyperbola by center, major radius, endpoints
+ ჰიპერბოლის რკალი ცენტრის, ძირითადი რადიუსის და ბოლო წერტილების მიხედვით
Arc of parabola by focus, vertex, endpoints
- Arc of parabola by focus, vertex, endpoints
+ პარაბოლის რკალის აგება ფოკუსით, წვეროთი და ბოლო წერტილებით
@@ -403,12 +403,12 @@
Increase knot multiplicity
- Increase knot multiplicity
+ კვანძის ჯერადობის გაზრდა
Decrease knot multiplicity
- Decrease knot multiplicity
+ კვანძის ჯერადობის შემცირება
@@ -538,7 +538,7 @@
Create a horizontal constraint on the selected item
- Create a horizontal constraint on the selected item
+ არჩეულ ელემენტზე ჰორიზონტალური შეზღუდვის შექმნა
@@ -579,7 +579,7 @@ on the selected vertex
Create a parallel constraint between two lines
- Create a parallel constraint between two lines
+ ორ ხაზს შორის პარალელურობის შეზღუდვის შექმნა
@@ -592,7 +592,7 @@ on the selected vertex
Create a perpendicular constraint between two lines
- Create a perpendicular constraint between two lines
+ ორ ხაზს შორის მართობის შეზღუდვის შექმნა
@@ -700,7 +700,7 @@ with respect to a line or a third point
Converts the selected geometry to a B-spline
- Converts the selected geometry to a B-spline
+ მონიშნული გეომეტრიის B-სპლაინად გარდაქმნა
@@ -843,7 +843,7 @@ with respect to a line or a third point
Create an ellipse by 3 points in the sketch
- Create an ellipse by 3 points in the sketch
+ ესკიზზე ელიფსის 3 წერტილით შექმნა
@@ -908,7 +908,7 @@ with respect to a line or a third point
Create a line in the sketch
- Create a line in the sketch
+ ესკიზზე ხაზის შექმნა
@@ -1012,7 +1012,7 @@ with respect to a line or a third point
Create a rectangle in the sketch
- Create a rectangle in the sketch
+ ესკიზზე მართკუთხედის შექმნა
@@ -1025,7 +1025,7 @@ with respect to a line or a third point
Create a centered rectangle in the sketch
- Create a centered rectangle in the sketch
+ ესკიზში ცენტრზე გასწორებული მართკუთხედის შექმნა
@@ -1077,7 +1077,7 @@ with respect to a line or a third point
Create text in the sketch
- Create text in the sketch
+ ესკიზზე ტექსტის შექმნა
@@ -1085,12 +1085,12 @@ with respect to a line or a third point
Create equilateral triangle
- Create equilateral triangle
+ ტოლგვერდა სამკუთხედის შექმნა
Create an equilateral triangle in the sketch
- Create an equilateral triangle in the sketch
+ ესკიზზე ტოლფერდა სამკუთხედის შექმნა
@@ -1103,7 +1103,7 @@ with respect to a line or a third point
Decreases the degree of the B-spline
- Decreases the degree of the B-spline
+ B-სპლაინის დონის დაწევა
@@ -1111,7 +1111,7 @@ with respect to a line or a third point
Decrease knot multiplicity
- Decrease knot multiplicity
+ კვანძის ჯერადობის შემცირება
@@ -1129,7 +1129,7 @@ with respect to a line or a third point
Delete all constraints in the sketch
- Delete all constraints in the sketch
+ ესკიზის ყველა შეზღუდვის წაშლა
@@ -1155,7 +1155,7 @@ with respect to a line or a third point
Edit the selected sketch.
- Edit the selected sketch.
+ მონიშნული ესკიზის ჩასწორება.
@@ -1181,7 +1181,7 @@ with respect to a line or a third point
Create an edge linked to an external geometry
- Create an edge linked to an external geometry
+ გარე გეომეტრიაზე მიბმული წიბოს შექმნა
@@ -1194,7 +1194,7 @@ with respect to a line or a third point
Increases the degree of the B-spline
- Increases the degree of the B-spline
+ B-სპლაინის დონის აწევა
@@ -1202,7 +1202,7 @@ with respect to a line or a third point
Increase knot multiplicity
- Increase knot multiplicity
+ კვანძის ჯერადობის გაზრდა
@@ -1402,7 +1402,7 @@ This will clear the 'Support' property, if any.
Select associated geometry
- Select associated geometry
+ მიბმული გეომეტრიის მონიშვნა
@@ -1433,7 +1433,7 @@ This will clear the 'Support' property, if any.
Select the local horizontal axis of the sketch
- Select the local horizontal axis of the sketch
+ ესკიზის ლოკალური ჰორიზონტალური ღერძის არჩევა
@@ -1455,7 +1455,7 @@ This will clear the 'Support' property, if any.
Select the local origin point of the sketch
- Select the local origin point of the sketch
+ აირჩიეთ ესკიზის ლოკალური კოორდინატების საწყისი წერტილი
@@ -1486,7 +1486,7 @@ This will clear the 'Support' property, if any.
Select the local vertical axis of the sketch
- Select the local vertical axis of the sketch
+ ესკიზის ლოკალური ვერტიკალური ღერძის არჩევა
@@ -1715,13 +1715,13 @@ invalid constraints, degenerated geometry, etc.
Add distance from horizontal axis constraint
- Add distance from horizontal axis constraint
+ ჰორიზონტალური ღერძის შეზღუდვამდე მანძილის დამატება
Add distance from vertical axis constraint
- Add distance from vertical axis constraint
+ ვერიკალურ ღერძამდე მანძილის შეზღუდვის დამატება
@@ -1995,12 +1995,12 @@ invalid constraints, degenerated geometry, etc.
Add sketch arc of hyperbola
- Add sketch arc of hyperbola
+ ჰიპერბოლის ესკიზური რკალის დამატება
Add sketch arc of Parabola
- Add sketch arc of Parabola
+ პარაბოლის ესკიზური რკალის დამატება
@@ -2071,12 +2071,12 @@ invalid constraints, degenerated geometry, etc.
Increase knot multiplicity
- Increase knot multiplicity
+ კვანძის ჯერადობის გაზრდა
Decrease knot multiplicity
- Decrease knot multiplicity
+ კვანძის ჯერადობის შემცირება
@@ -2091,7 +2091,7 @@ invalid constraints, degenerated geometry, etc.
Copy/clone/move geometry
- Copy/clone/move geometry
+ გეომეტრიის კოპირება/ასლი/გადატანა
@@ -2296,7 +2296,7 @@ invalid constraints, degenerated geometry, etc.
Can't map the sketch to selected object. %1.
- Can't map the sketch to selected object. %1.
+ შეუძლებელია ესკიზის რუკის მონიშნულ ობიექტზე დატანა. %1.
@@ -2522,7 +2522,7 @@ invalid constraints, degenerated geometry, etc.
One of the selected has to be on the sketch
- One of the selected has to be on the sketch
+ ერთერთი მონიშნული ესკიზზე უნდა იყოს
@@ -2576,7 +2576,7 @@ invalid constraints, degenerated geometry, etc.
The selected edge already has a horizontal constraint!
- The selected edge already has a horizontal constraint!
+ მონიშნულ წიბოს უკვე აქვს ჰორიზონტალური შეზღუდვა!
@@ -2609,7 +2609,7 @@ invalid constraints, degenerated geometry, etc.
The selected item(s) can't accept a vertical constraint!
- The selected item(s) can't accept a vertical constraint!
+ არჩეული ელემენტ(ებ)-ი ვერ მიიღებს ვერტიკალურ შეზღუდვას!
@@ -2620,7 +2620,7 @@ invalid constraints, degenerated geometry, etc.
Select vertices from the sketch.
- Select vertices from the sketch.
+ ესკიზზე წვეროების მონიშვნა.
@@ -2672,18 +2672,18 @@ invalid constraints, degenerated geometry, etc.
Select two or more points from the sketch.
- Select two or more points from the sketch.
+ აირჩიეთ ორი ან მეტი წერტილი.
Select two or more vertexes from the sketch.
- Select two or more vertexes from the sketch.
+ ესკიზიდან აირჩიეთ ორი ან მეტი წერტილი.
Select vertexes from the sketch.
- Select vertexes from the sketch.
+ ესკიზზე წერტილების მონიშვნა.
@@ -2787,7 +2787,7 @@ invalid constraints, degenerated geometry, etc.
Cannot add a vertical length constraint on an axis!
- Cannot add a vertical length constraint on an axis!
+ ღერძზე ვერტიკალური სიგრძის შეზღუდვის დაწესება შეუძლებელია!
@@ -2803,7 +2803,7 @@ invalid constraints, degenerated geometry, etc.
Select at least two lines from the sketch.
- Select at least two lines from the sketch.
+ მონიშნეთ მინიმუმ 2 ხაზი.
@@ -2814,7 +2814,7 @@ invalid constraints, degenerated geometry, etc.
The selected edge is not a valid line
- The selected edge is not a valid line
+ მონიშნული წიბო არ წარმოადგენს სწორ ხაზს
@@ -2843,7 +2843,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
With 3 objects, there must be 2 curves and 1 point.
tangent constraint
- With 3 objects, there must be 2 curves and 1 point.
+ 3 ობიექტით უნდა იყოს 2 მრუდი და 1 წერტილი.
@@ -2862,7 +2862,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
One of the selected edges should be a line.
- One of the selected edges should be a line.
+ ერთი მონიშნული წიბოებიდან ხაზი უნდა იყოს.
@@ -2918,7 +2918,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
Select one or more arcs or circles from the sketch.
- Select one or more arcs or circles from the sketch.
+ აირჩიეთ ერთი ან მეტი რკალი ან წრეწირი ესკიზიდან.
@@ -2931,7 +2931,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
Constraint only applies to arcs or circles.
- Constraint only applies to arcs or circles.
+ შეზღუდვები ეხებამხოლოდ რკალებს და წრეწირებს.
@@ -2965,7 +2965,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
Select two or more compatible edges
- Select two or more compatible edges
+ აირჩიეთ ორი ან მეტი თავსებადი წიბო
@@ -3019,7 +3019,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
Number of selected objects is not 3 (is %1).
- Number of selected objects is not 3 (is %1).
+ მონიშნული ობიექტების რიცხვი არ უდრის სამს (%1).
@@ -3029,7 +3029,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
Incompatible geometry is selected.
- Incompatible geometry is selected.
+ არჩეულია შეუთავსებელი გეომეტრია.
@@ -3118,7 +3118,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
Select constraints from the sketch.
- Select constraints from the sketch.
+ აირჩიეთ შეზღუდვები ესკიზიდან.
@@ -3171,7 +3171,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
None of the selected elements is a knot of a B-spline
- None of the selected elements is a knot of a B-spline
+ არცერთი არჩეული ელემენტი არ არის B-სპლაინის კვანძი
@@ -3179,7 +3179,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
Select at least two edges from the sketch.
- Select at least two edges from the sketch.
+ მონიშნეთ მინიმუმ 2 წიბო.
@@ -3263,12 +3263,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
Carbon copy would cause a circular dependency.
- Carbon copy would cause a circular dependency.
+ ზუსტი ასლი წრიულ დამოკიდებულებას გამოიწვევს.
This object is in another document.
- This object is in another document.
+ ეს ობიექტი სხვა დოკუმენტშია.
@@ -3283,7 +3283,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
This object belongs to another part.
- This object belongs to another part.
+ ეს ობიექტი სხვა ნაწილს ეკუთვნის.
@@ -3452,12 +3452,12 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
Linking this will cause circular dependency.
- Linking this will cause circular dependency.
+ ამის მიბმა გამოიწევევს წრიულ დამოკიდებულებას.
This object is in another document.
- This object is in another document.
+ ეს ობიექტი სხვა დოკუმენტშია.
@@ -3599,7 +3599,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c
Number of rows of the linear array
- Number of rows of the linear array
+ ხაზოვანი მასივის მწკრივების რაოდენობა
@@ -3805,7 +3805,7 @@ Requires to re-enter edit mode to take effect.
Geometric element colors
- Geometric element colors
+ გეომეტრიული ელემენტის ფერები
@@ -3820,7 +3820,7 @@ Requires to re-enter edit mode to take effect.
Color of edges being edited
- Color of edges being edited
+ მიმდინარეობს წიბოს ფერების ჩასწორება
@@ -3852,12 +3852,12 @@ Requires to re-enter edit mode to take effect.
Color of edges of internal alignment geometry
- Color of edges of internal alignment geometry
+ შიდა სწორების გეომეტრიის წიბოების ფერი
Color of construction geometry in edit mode
- Color of construction geometry in edit mode
+ დამხმარე გეომეტრიის ფერი ჩასწორების რეჟიმში
@@ -3942,7 +3942,7 @@ Requires to re-enter edit mode to take effect.
Color of reference constraints in edit mode
- Color of reference constraints in edit mode
+ მიბმული შეზღუდვების ფერი ჩასწორების დროს
@@ -3962,7 +3962,7 @@ Requires to re-enter edit mode to take effect.
Color of deactivated constraints in edit mode
- Color of deactivated constraints in edit mode
+ ჩასწორების რეჟიმში გამორთული შეზღუდვების ფერი
@@ -4000,7 +4000,7 @@ Requires to re-enter edit mode to take effect.
Font size used for labels and constraints.
- Font size used for labels and constraints.
+ ჭდეებისთვის და შეზღუდვებისთვის გამოყენებული ფონტის ზომა.
@@ -4125,7 +4125,7 @@ Defaults to: %N = %V
Hide all objects that depend on the sketch
- Hide all objects that depend on the sketch
+ ყველა ობიექტის, რომელიც ესკიზზეა დამოკიდებული, დამალვა
@@ -4145,7 +4145,7 @@ Defaults to: %N = %V
Show objects that the sketch is attached to
- Show objects that the sketch is attached to
+ ესკიზზე მიბმული ობიექტების ჩვენება
@@ -4167,7 +4167,7 @@ Works only when "Restore camera position after editing" is enabled.
Force orthographic camera when entering edit
- Force orthographic camera when entering edit
+ ჩასწორების რეჟიში გადასვლისას ორთგრაფიული კამერის ავტომატური ჩართვა
@@ -4532,7 +4532,7 @@ However, no constraints linking to the endpoints were found.
Extended information will be added to the list
- Extended information will be added to the list
+ გაფართოებული ინფორმაცია დაემატება სიას
@@ -4542,7 +4542,7 @@ However, no constraints linking to the endpoints were found.
Internal alignments will be hidden
- Internal alignments will be hidden
+ შიდა სწორებები დაიმალება
@@ -4765,7 +4765,7 @@ However, no constraints linking to the endpoints were found.
Distance between two subsequent grid lines
- Distance between two subsequent grid lines
+ ბადის ორ მეზობელ ხაზს შორს მანძილი
@@ -4944,7 +4944,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.<
The sketch is invalid and cannot be edited.
- The sketch is invalid and cannot be edited.
+ ესკიზი არასწორია. მისი ჩასწორება შეუძლებელია.
@@ -4954,7 +4954,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.<
Please remove at least one of the following constraints:
- Please remove at least one of the following constraints:
+ გთხოვთ, ამოიღოთ მინიმუმ ერთი შემდეგი შეზღუდვა:
@@ -4984,7 +4984,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.<
Please remove the following malformed constraints:
- Please remove the following malformed constraints:
+ გთხოვთ, წაშალოთ შემდეგი არასწორად ფორმირებული შეზღუდვები:
@@ -5028,7 +5028,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.<
Fully constrained sketch
- Fully constrained sketch
+ სრულად შეზღუდული ესკიზი
@@ -5164,7 +5164,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.<
Fix the radius of a circle or an arc
- Fix the radius of a circle or an arc
+ წრეწირის ან რკალის რადიუსის გამუდმივება
@@ -5249,7 +5249,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.<
Create a B-spline by control points
- Create a B-spline by control points
+ B-სპლაინის საკონტროლო წერტილებით შექმნა
@@ -5276,7 +5276,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.<
Create an ellipse by center, major radius and point
- Create an ellipse by center, major radius and point
+ ელიფსის ცენტრის, ძირითადი რადიუსის და წერტილის მიხედვით შექმნა
@@ -5285,7 +5285,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.<
Creates a radius between two lines
- Creates a radius between two lines
+ რადიუსის ორ ხაზს შუა შექმნა
@@ -5311,7 +5311,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.<
Create a rounded rectangle
- Create a rounded rectangle
+ მომრგვალებული ოთხკუთხედის შექმნა
@@ -5386,13 +5386,13 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.<
Periodic B-spline by control points
- Periodic B-spline by control points
+ პერიოდული B-სპლაინი საკონტროლო წერტილებით
Create a periodic B-spline by control points
- Create a periodic B-spline by control points
+ საკონტროლო წერტილებით პერიოდული B-სპლაინის შექმნა
@@ -5405,7 +5405,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.<
The document doesn't have a sketch
- The document doesn't have a sketch
+ დოკუმენტს ესკიზი არ გააჩნია
@@ -5624,7 +5624,7 @@ BFGS solver uses the Broyden–Fletcher–Goldfarb–Shanno algorithm.
Maximum number of iterations of the default algorithm
- Maximum number of iterations of the default algorithm
+ ნაგულისხმევი ალგორითმის იტერაციების მაქსიმალური რაოდენობა
@@ -5750,7 +5750,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster
Redundant max. iterations:
- Redundant max. iterations:
+ დამატებითი იტერაციების მაქს. რაოდენობა:
@@ -5820,7 +5820,7 @@ Eigen Sparse QR algorithm is optimized for sparse matrices; usually faster
Verbosity of console output
- Verbosity of console output
+ კონსოლში გამოტანილი შეტყობინებების სიზუსტე
diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.qm
index 374480ee0e..22b16b3212 100644
Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.qm differ
diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts
index 3bd51d39cd..b18726e7b3 100644
--- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts
+++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts
@@ -829,7 +829,7 @@ glede na črto ali tretjo točko
Create a draft line in the sketch
- Ustvari snovalno črto v očrtovalniku
+ Ustvari v očrtu izrisno daljico
@@ -1227,7 +1227,7 @@ glede na črto ali tretjo točko
Map sketch to face...
- Preslikaj očrt na ploskev ...
+ Preslikaj očrt na ploskev ...
@@ -1350,7 +1350,7 @@ preko X ali Y osi, oz. preko izhodiščne točke.
Reorient sketch...
- Preusmeri očrt ...
+ Preusmeri očrt ...
@@ -1510,7 +1510,7 @@ To bo izbrisalo lastnosti "Podpore", če sploh obstajajo.
When in edit mode, stop the active operation (drawing, constraining, etc.).
- V urejevalnem načinu prekini dejavno opravilo (risanje, omejevanje, ...).
+ V urejevalnem načinu prekini dejavno opravilo (risanje, omejevanje, ...).
@@ -1598,14 +1598,14 @@ na gnani oz. sklicni način
Validate sketch...
- Preveri veljavnost očrta ...
+ Preveri veljavnost očrta ...
Validate a sketch by looking at missing coincidences,
invalid constraints, degenerated geometry, etc.
Preveri, ali ima očrt manjkajoča sovpadanja,
-neveljavna omejila, izrojene geometrije, ...
+neveljavna omejila, izrojene geometrije, ...
@@ -1936,7 +1936,7 @@ neveljavna omejila, izrojene geometrije, ...
Toggle draft from/to draft
- Preklopi med oznutek iz/v osnutek
+ Preklopi izris iz / v izris
diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ka.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_ka.qm
index d2450868ab..28a8fbc672 100644
Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_ka.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_ka.qm differ
diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ka.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_ka.ts
index 558180ff91..0ace1f4dd8 100644
--- a/src/Mod/Start/Gui/Resources/translations/StartPage_ka.ts
+++ b/src/Mod/Start/Gui/Resources/translations/StartPage_ka.ts
@@ -51,7 +51,7 @@
User hub
- User hub
+ მომხმარებლების ცენტრალური ქსელი
@@ -61,7 +61,7 @@
Power users hub
- Power users hub
+ გამოცდილი მომხმარებლების საერთო ქსელი
@@ -71,7 +71,7 @@
Developers hub
- Developers hub
+ დეველოპერების საერთო ქსელი
@@ -91,7 +91,7 @@
Workbenches documentation
- Workbenches documentation
+ დაზგის დოკუმენტაცია
@@ -101,7 +101,7 @@
Getting help from the community
- Getting help from the community
+ დახმარების საზოგადოებისგან მიღება
@@ -121,7 +121,7 @@
Available addons
- Available addons
+ ხელმისაწვდომი დამატებები
@@ -141,7 +141,7 @@
Recent commits
- Recent commits
+ ბოლოდროინდელი კომიტები
@@ -151,7 +151,7 @@
See all commits on github
- See all commits on github
+ ყველა კომიტის GitHub-ზე ნახვა
@@ -211,7 +211,7 @@
Open start page preferences
- Open start page preferences
+ საწყისი გვერდის მორგება
@@ -237,7 +237,7 @@
Displays the start page in a browser view
- Displays the start page in a browser view
+ საწყისი გვერდის ჩაშენებულ ბრაუზერში ჩვენება
@@ -245,12 +245,12 @@
Start page options
- Start page options
+ საწყისი გვერდის ჩასწორება
Start page template
- Start page template
+ საწყისი გვერდის ნიმუში
@@ -270,17 +270,17 @@
Show examples folder contents
- Show examples folder contents
+ მაგალითების საქაღალდის შემცველობის ჩვენება
Show additional folder
- Show additional folder
+ დამატებითი საქაღალდის ჩვენება
If you want the examples to show on the first page
- If you want the examples to show on the first page
+ გნებავთ პირველ გვერდზე მაგალითების ჩვენება
@@ -297,7 +297,7 @@ By using ";;" to separate paths, you can add several folders here
Show notepad
- Show notepad
+ ბლოკნოტის ჩვენება
@@ -317,12 +317,12 @@ By using ";;" to separate paths, you can add several folders here
Fonts and colors
- Fonts and colors
+ ფონტები და ფერები
The background of the main start page area
- The background of the main start page area
+ მთავარი საწყისი გვერდის ფონი
@@ -337,7 +337,7 @@ By using ";;" to separate paths, you can add several folders here
In external browser
- In external browser
+ გარე ბრაუზერში
@@ -347,7 +347,7 @@ By using ";;" to separate paths, you can add several folders here
The color of the version text
- The color of the version text
+ ვერსიის ტექსტის ფერი
@@ -357,7 +357,7 @@ By using ";;" to separate paths, you can add several folders here
An optional image to display as background
- An optional image to display as background
+ არასავალდებულო სურათი ფონზე საჩვენებლად
@@ -367,27 +367,27 @@ By using ";;" to separate paths, you can add several folders here
Page background color
- Page background color
+ გვერდის ფონის ფერი
The color of the text on the main pages
- The color of the text on the main pages
+ მთავარი გვერდების ტექსტის ფერი
Background image
- Background image
+ ფონის გამოსახულება
Page text color
- Page text color
+ გვერდის ტექსტის ფერი
The color of the links
- The color of the links
+ ბმულების ფერი
@@ -397,12 +397,12 @@ By using ";;" to separate paths, you can add several folders here
Box background color
- Box background color
+ ველის ფონის ფერი
The background color behind the panels
- The background color behind the panels
+ პანელების მიღმა ფერი
@@ -417,12 +417,12 @@ By using ";;" to separate paths, you can add several folders here
Background text color
- Background text color
+ ფონის ტექსტის ფერი
Use FreeCAD style sheet
- Use FreeCAD style sheet
+ FreeCAD-ის სტილების გამოყენება
@@ -437,7 +437,7 @@ By using ";;" to separate paths, you can add several folders here
Arial,Helvetica,sans
- Arial,Helvetica,sans
+ Arial,Helvetica,sans
@@ -452,7 +452,7 @@ By using ";;" to separate paths, you can add several folders here
Use gradient for New File icon
- Use gradient for New File icon
+ ახალი ხატულის ფაილისთვის გრადიენტის გამოყენება
@@ -477,17 +477,17 @@ By using ";;" to separate paths, you can add several folders here
Switch workbench after loading
- Switch workbench after loading
+ ჩატვირთვის შემდეგ დაზგის გადართვა
Close start page after loading
- Close start page after loading
+ საწყისი გვერდის დახურვა ჩატვირთვის შემდეგ
Close and switch on opening file
- Close and switch on opening file
+ დახურვა და ფაილის გახსნაზე გადართვა
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm
index 070c1a9146..9aa8169b4f 100644
Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.qm differ
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts
index a460bfd682..e2cebb2ff7 100644
--- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts
+++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts
@@ -6,42 +6,42 @@
Copy View
- Copy View
+ Ansicht kopieren
Copy a View to a second Page
- Copy a View to a second Page
+ Eine Ansicht auf eine zweite Seite kopieren
Copy View to a second Page
- Copy View to a second Page
+ Ansicht auf eine zweite Seite kopieren
Select View to copy from list.
- Select View to copy from list.
+ Zu kopierende Ansicht von der Liste auswählen.
Select View
- Select View
+ Ansicht auswählen
Select From Page.
- Select From Page.
+ Von Seite auswählen.
Select Page
- Select Page
+ Seite auswählen
Select To Page.
- Select To Page.
+ Zur Seite auswählen.
@@ -49,42 +49,42 @@
Move View
- Move View
+ Ansicht verschieben
Move a View to a new Page
- Move a View to a new Page
+ Eine Ansicht auf eine neue Seite verschieben
Move View to a different Page
- Move View to a different Page
+ Ansicht auf eine andere Seite verschieben
Select View to move from list.
- Select View to move from list.
+ Zu verschiebende Ansicht aus Liste auswählen.
Select View
- Select View
+ Ansicht auswählen
Select From Page.
- Select From Page.
+ Von Seite auswählen.
Select Page
- Select Page
+ Seite auswählen
Select To Page.
- Select To Page.
+ Zur Seite auswählen.
@@ -1189,7 +1189,7 @@
No Shapes, Groups or Links in this selection
- Keine Formen, Gruppen oder Links in dieser Auswahl
+ Keine Formen, Gruppen oder Link-Objekte in dieser Auswahl
Select at least 1 DrawViewPart object as Base.
@@ -3809,7 +3809,7 @@ Du kannst weitere Punkte auswählen, um Liniensegmente zu erhalten.
Scale Numerator
- Skalierungszähler
+ Maßstabszähler
:
@@ -3817,7 +3817,7 @@ Du kannst weitere Punkte auswählen, um Liniensegmente zu erhalten.
Scale Denominator
- Skalierungsnenner
+ Maßstabsnenner
Adjust Primary Direction
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.qm
index a812e14977..14d2bf2b09 100644
Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.qm differ
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts
index 768e51f3ff..2cec235c18 100644
--- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts
+++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts
@@ -26,7 +26,7 @@
Select View
- Select View
+ Επιλέξτε Προβολή
@@ -49,7 +49,7 @@
Move View
- Move View
+ Μετακίνηση προβολής
@@ -69,7 +69,7 @@
Select View
- Select View
+ Επιλέξτε Προβολή
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.qm
index c8c48854fb..760a3acf41 100644
Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.qm differ
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts
index 10be678c52..eedb9aeb8c 100644
--- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts
+++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts
@@ -6,17 +6,17 @@
Copy View
- Copy View
+ Copiar vista
Copy a View to a second Page
- Copy a View to a second Page
+ Copiar vista a una segunda página
Copy View to a second Page
- Copy View to a second Page
+ Copia la vista a una segunda página
@@ -36,7 +36,7 @@
Select Page
- Select Page
+ Selecciona página
@@ -49,7 +49,7 @@
Move View
- Move View
+ Mover vista
@@ -59,7 +59,7 @@
Move View to a different Page
- Move View to a different Page
+ Mover vista a una página diferente
@@ -79,7 +79,7 @@
Select Page
- Select Page
+ Selecciona página
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm
index 112e2840df..e8f10d7d6a 100644
Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.qm differ
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts
index bf7a459ea7..e17f15130e 100644
--- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts
+++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts
@@ -36,7 +36,7 @@
Select Page
- Select Page
+ Selecciona página
@@ -49,7 +49,7 @@
Move View
- Move View
+ Mover vista
@@ -59,7 +59,7 @@
Move View to a different Page
- Move View to a different Page
+ Mover vista a una página diferente
@@ -79,7 +79,7 @@
Select Page
- Select Page
+ Selecciona página
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.qm
index b6a1528a9a..c2144ef7ed 100644
Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.qm differ
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts
index ca08bf91aa..02f6dc9bed 100644
--- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts
+++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts
@@ -6,42 +6,42 @@
Copy View
- Copy View
+ Kopioi näkymä
Copy a View to a second Page
- Copy a View to a second Page
+ Kopioi näkymä toiselle sivulle
Copy View to a second Page
- Copy View to a second Page
+ Kopioi näkymä toiselle sivulle
Select View to copy from list.
- Select View to copy from list.
+ Valitse kopioitava näkymä listalta.
Select View
- Select View
+ Valitse näkymä
Select From Page.
- Select From Page.
+ Valitse sivulta.
Select Page
- Select Page
+ Valitse sivu
Select To Page.
- Select To Page.
+ Valitse sivulle.
@@ -49,42 +49,42 @@
Move View
- Move View
+ Siirrä näkymä
Move a View to a new Page
- Move a View to a new Page
+ Siirrä näkymä uudelle sivulle
Move View to a different Page
- Move View to a different Page
+ Siirrä näkymä eri sivulle
Select View to move from list.
- Select View to move from list.
+ Valitse siirrettävä näkymä listalta.
Select View
- Select View
+ Valitse näkymä
Select From Page.
- Select From Page.
+ Valitse sivulta.
Select Page
- Select Page
+ Valitse sivu
Select To Page.
- Select To Page.
+ Valitse sivulle.
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm
index dec2cb0c57..d9313781fc 100644
Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.qm differ
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts
index 08b560f82a..318e3b7de0 100644
--- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts
+++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts
@@ -6,37 +6,37 @@
Copy View
- Copy View
+ Copier la vue
Copy a View to a second Page
- Copy a View to a second Page
+ Copier une vue vers une deuxième page
Copy View to a second Page
- Copy View to a second Page
+ Copier la vue vers une deuxième page
Select View to copy from list.
- Select View to copy from list.
+ Sélectionnez la vue à copier dans la liste.
Select View
- Select View
+ Choisir une vue
Select From Page.
- Select From Page.
+ Sélectionner depuis la page.
Select Page
- Select Page
+ Sélectionner la Page
@@ -49,37 +49,37 @@
Move View
- Move View
+ Déplacer la vue
Move a View to a new Page
- Move a View to a new Page
+ Déplacer une vue vers une nouvelle page
Move View to a different Page
- Move View to a different Page
+ Déplacer la vue vers une autre page
Select View to move from list.
- Select View to move from list.
+ Sélectionnez la vue à déplacer depuis la liste.
Select View
- Select View
+ Choisir une vue
Select From Page.
- Select From Page.
+ Sélectionner depuis la page.
Select Page
- Select Page
+ Sélectionner la Page
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.qm
index 0f21991886..586eed62d4 100644
Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.qm differ
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts
index a067569ae1..552d3fee14 100644
--- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts
+++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts
@@ -6,42 +6,42 @@
Copy View
- Copy View
+ Copia vista
Copy a View to a second Page
- Copy a View to a second Page
+ Copia una vista in una seconda pagina
Copy View to a second Page
- Copy View to a second Page
+ Copia vista in una seconda pagina
Select View to copy from list.
- Select View to copy from list.
+ Selezionare la vista da copiare dall'elenco.
Select View
- Select View
+ Seleziona vista
Select From Page.
- Select From Page.
+ Seleziona dalla pagina.
Select Page
- Select Page
+ Seleziona pagina
Select To Page.
- Select To Page.
+ Selezione alla pagina.
@@ -49,42 +49,42 @@
Move View
- Move View
+ Sposta vista
Move a View to a new Page
- Move a View to a new Page
+ Sposta una vista in una nuova pagina
Move View to a different Page
- Move View to a different Page
+ Sposta la vista in una pagina diversa
Select View to move from list.
- Select View to move from list.
+ Selezionare la vista da spostare dall'elenco.
Select View
- Select View
+ Seleziona vista
Select From Page.
- Select From Page.
+ Seleziona dalla pagina.
Select Page
- Select Page
+ Seleziona pagina
Select To Page.
- Select To Page.
+ Selezione alla pagina.
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.qm
index 7ea1551219..ad9854d9a6 100644
Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.qm differ
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts
index f680e56c4a..c94e8c9744 100644
--- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts
+++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts
@@ -6,7 +6,7 @@
Copy View
- Copy View
+ ხედის კოპირება
@@ -16,7 +16,7 @@
Copy View to a second Page
- Copy View to a second Page
+ ხედის მეორე გვერდზე კოპირება
@@ -26,22 +26,22 @@
Select View
- Select View
+ აირჩიეთ ხედი
Select From Page.
- Select From Page.
+ მონიშვნა დაწყებული გვერდიდან.
Select Page
- Select Page
+ აირჩიეთ გვერდი
Select To Page.
- Select To Page.
+ მონიშვნა გვერდამდე.
@@ -49,12 +49,12 @@
Move View
- Move View
+ ხედის გადატანა
Move a View to a new Page
- Move a View to a new Page
+ ხედის ახალ გვერდზე გადატანა
@@ -69,22 +69,22 @@
Select View
- Select View
+ აირჩიეთ ხედი
Select From Page.
- Select From Page.
+ მონიშვნა დაწყებული გვერდიდან.
Select Page
- Select Page
+ აირჩიეთ გვერდი
Select To Page.
- Select To Page.
+ მონიშვნა გვერდამდე.
@@ -105,7 +105,7 @@
CmdMidpoints
Add Midpoint Vertices
- Add Midpoint Vertices
+ შუაწერტილის წვეროების დამატება
@@ -178,7 +178,7 @@
Insert Angle Dimension
- Insert Angle Dimension
+ კუთხური ზომის მითითება
@@ -241,7 +241,7 @@
Insert Clip Group
- Insert Clip Group
+ კვეთების ჯგუფის ჩასმა
@@ -252,7 +252,7 @@
Add View to Clip Group
- Add View to Clip Group
+ კვეთების ჯგუფში ხედის ჩამატება
@@ -263,7 +263,7 @@
Remove View from Clip Group
- Remove View from Clip Group
+ კვეთების ჯგუფიდან ხედის წაშლა
@@ -274,7 +274,7 @@
Remove Cosmetic Object
- Remove Cosmetic Object
+ დამხმარე ობიექტის წაშლა
@@ -296,7 +296,7 @@
Insert Cosmetic Vertex
- Insert Cosmetic Vertex
+ დამხმარე წვეროს ჩასმა
Add Cosmetic Vertex
@@ -423,15 +423,15 @@
Cosmetic thread bolt bottom view
- Cosmetic thread bolt bottom view
+ კოსმეტიკური კუთხვილის ხრახნის ფსკერის ხედი
Draw cosmetic screw thread ground view
- select many circles
- click this button
- Draw cosmetic screw thread ground view
- - select many circles
- - click this button
+ კოსმეტიკური ხრახნის ქვედა ხედის დახატვა
+ - აირჩიეთ ბევრი წრეწირი
+ - დააწექით ღილაკს
@@ -442,15 +442,15 @@
Cosmetic thread bolt side view
- Cosmetic thread bolt side view
+ კოსმეტიკური კუთხვილის ხრახნის გვერდხედი
Draw cosmetic screw thread side view
- select two parallel lines
- click this button
- Draw cosmetic screw thread side view
- - select two parallel lines
- - click this button
+ კოსმეტიკური ხრახნის გვერდხედის დახატვა
+ - აირჩიეთ ორი პარალელური ხაზი
+ - დააწექით ღილაკს
@@ -461,15 +461,15 @@
Cosmetic thread hole bottom view
- Cosmetic thread hole bottom view
+ კოსმეტიკური კუთხვილის ხვრელის ფსკერის ხედი
Draw cosmetic hole thread ground view
- select many circles
- click this button
- Draw cosmetic hole thread ground view
- - select many circles
- - click this button
+ კოსმეტიკური კუთხვილის ქვედა ხედის დახატვა
+ - აირჩიეთ ბევრი წრეწირი
+ - დააწექით ღილაკს
@@ -480,15 +480,15 @@
Cosmetic thread hole side view
- Cosmetic thread hole side view
+ კოსმეტიკური კუთხვილის ხვრელის გვერდხედი
Draw cosmetic thread hole side view
- select two parallel lines
- click this button
- Draw cosmetic thread hole side view
- - select two parallel lines
- - click this button
+ კოსმეტიკური კუთხვილის გვერდხედის დახატვა
+ - აირჩიეთ ორი პარალელური ხაზი
+ - დააწექით ღილაკს
@@ -529,7 +529,7 @@
Apply Geometric Hatch to Face
- Apply Geometric Hatch to Face
+ ზედაპირზე გეომეტრიული დაშტრიხვის გადატარება
@@ -540,7 +540,7 @@
Hatch a Face using Image File
- Hatch a Face using Image File
+ ზედაპირის დაშტრიხვა გამოსახულების ფაილის მიხედვით
@@ -551,7 +551,7 @@
Insert Horizontal Dimension
- Insert Horizontal Dimension
+ ჰორიზონტალური ზომის ჩასმა
@@ -640,7 +640,7 @@
Add Midpoint Vertices
- Add Midpoint Vertices
+ შუაწერტილის წვეროების დამატება
@@ -662,11 +662,11 @@
Insert Page using Template
- Insert Page using Template
+ ახალი გვერდის ჩამატება შაბლონის გამოყენებით
Select a Template File
- Select a Template File
+ აირჩიეთ შაბლონის ფაილი
Template (*.svg *.dxf)
@@ -729,7 +729,7 @@
Insert Rich Text Annotation
- Insert Rich Text Annotation
+ ფორმატირებული ანოტაციის დამატება
@@ -859,7 +859,7 @@
Create Clip
- Create Clip
+ კვეთის შექმნა
ClipGroupAdd
@@ -867,7 +867,7 @@
ClipGroupRemove
- ClipGroupRemove
+ კვეთების ჯგუფის წაშლა
Create Symbol
@@ -875,11 +875,11 @@
Create DraftView
- Create DraftView
+ DraftView-ის შექმნა
Create ArchView
- Create ArchView
+ ArchView-ის შექმნა
Create spreadsheet view
@@ -891,7 +891,7 @@
Add Midpont Vertices
- Add Midpont Vertices
+ შუაწერტილის წვეროების დამატება
Add Quadrant Vertices
@@ -907,11 +907,11 @@
Create Hatch
- Create Hatch
+ დაშტრიხვის შექმნა
Create GeomHatch
- Create GeomHatch
+ გეომ-დაშტრიხვის შექმნა
Create Image
@@ -923,7 +923,7 @@
Drag Dimension
- Drag Dimension
+ ზომის გადათრევა
Create Balloon
@@ -1082,15 +1082,15 @@
Bullet list (CTRL+-)
- Bullet list (CTRL+-)
+ დანომრილი სია (CTRL+-)
Ordered list (CTRL+=)
- Ordered list (CTRL+=)
+ დალაგებული სია (CTRL+=)
Decrease indentation (CTRL+,)
- Decrease indentation (CTRL+,)
+ შეწევის შემცირება(CTRL+,)
Decrease indentation
@@ -1098,7 +1098,7 @@
Increase indentation (CTRL+.)
- Increase indentation (CTRL+.)
+ შეწევის გაზრდა(CTRL+.)
Increase indentation
@@ -1106,11 +1106,11 @@
Text foreground color
- Text foreground color
+ ტექსტის ფერი
Text background color
- Text background color
+ ტექსტის ფონის ფერი
Background
@@ -1150,7 +1150,7 @@
Remove character formatting
- Remove character formatting
+ სიმბოლოს ფორმატირების მოშორება
Remove all formatting
@@ -1217,7 +1217,7 @@
Select one Clip group and one View.
- Select one Clip group and one View.
+ აირჩიეთ ერთი კვეთების ჯგუფი და ერთი ხედი.
Select exactly one View to add to group.
@@ -1225,19 +1225,19 @@
Select exactly one Clip group.
- Select exactly one Clip group.
+ აირჩიეთ მხოლოდ ერთი კვეთების ჯგუფი.
Clip and View must be from same Page.
- Clip and View must be from same Page.
+ კვეთი და ხედი ერთ გვერდზე უნდა იყვნენ.
Select exactly one View to remove from Group.
- Select exactly one View to remove from Group.
+ აირჩიეთ ზუსტად ერთი ხედი ჯგუფიდან წასაშლელად.
View does not belong to a Clip
- View does not belong to a Clip
+ ხედი არ მიეკუთვნება კვეთს
Choose an SVG file to open
@@ -1289,7 +1289,7 @@
Ellipse Curve Warning
- Ellipse Curve Warning
+ ელიფსის რკალის გაფრთხლება
Selected edge is an Ellipse. Radius will be approximate. Continue?
@@ -1297,7 +1297,7 @@
BSpline Curve Warning
- BSpline Curve Warning
+ B-სპლაინის რკალის გაფრთხილება
Selected edge is a BSpline. Radius will be approximate. Continue?
@@ -1433,7 +1433,7 @@
No View in Selection.
- No View in Selection.
+ მონიშნულში ხედი არ არსებობს.
You must select a View and/or lines.
@@ -1449,15 +1449,15 @@
Replace Hatch?
- Replace Hatch?
+ შევცვალო დაშტრიხვა?
Some Faces in selection are already hatched. Replace?
- Some Faces in selection are already hatched. Replace?
+ ზოგიერთი ზედაპირი უკვე დაშტრიხულია. ჩავანაცვლო?
No TechDraw Page
- No TechDraw Page
+ TechDraw-ის გვერდი ნაპოვნი არაა
Need a TechDraw Page for this command
@@ -1477,7 +1477,7 @@
No Faces to hatch in this selection
- No Faces to hatch in this selection
+ მონიშნულებში დასაშტრიხი ზედაპირები ნაპოვნი არაა
No page found
@@ -1605,11 +1605,11 @@
Edit Cosmetic Line
- Edit Cosmetic Line
+ დამხმარე ხაზის ჩასწორება
New Detail View
- New Detail View
+ ნაწილის ახალი ხედი
Edit Detail View
@@ -1625,7 +1625,7 @@
Selection is empty
- Selection is empty
+ მონიშნული ცარიელია
No object selected
@@ -1633,15 +1633,15 @@
TechDraw Thread Hole Side
- TechDraw Thread Hole Side
+ TechDraw-ის კუთხვილის ხვრელის გვერდი
TechDraw Thread Bolt Side
- TechDraw Thread Bolt Side
+ TechDraw-ის კუთხვილის ხრახნის გვერდი
TechDraw Thread Hole Bottom
- TechDraw Thread Hole Bottom
+ TechDraw-ის კუთხვილის ხვრელის ფსკერი
TechDraw Tread Bolt Bottom
@@ -1720,7 +1720,7 @@ it has a tile weld that would become broken.
Width of generated view
- Width of generated view
+ გენერირებული ხედის სიგანე
Height
@@ -1758,7 +1758,7 @@ the top and left view border
Width of lines in generated view
- Width of lines in generated view
+ გენერირებული ხედში ხაზების სიგანე
Render Mode
@@ -1986,17 +1986,17 @@ Only change unless you know what you are doing!
Limit of 64x64 pixel SVG tiles used to hatch a single face.
For large scalings you might get an error about to many SVG tiles.
Then you need to increase the tile limit.
- Limit of 64x64 pixel SVG tiles used to hatch a single face.
-For large scalings you might get an error about to many SVG tiles.
-Then you need to increase the tile limit.
+ 64x64 პიქსელიანი SVG ფილების ლიმიტი, რომელიც გამოიყენება ერთი ზედაპირის დასაშტრიხად.
+დიდი მასშტაბის შემთხვევაში, შეიძლება ბევრ SVG ფილის ქონის შეცდომა გამოაგდოს.
+ამის შემდეგ თქვენ უნდა გაზარდოთ ფილების რიცხვის ლიმიტი.
Max SVG Hatch Tiles
- Max SVG Hatch Tiles
+ SVG დაშტრიხვის ფრაგმენტების მაქს. რაოდენობა
Max PAT Hatch Segments
- Max PAT Hatch Segments
+ PAT დაშტრიხვის სეგმენტების მაქს. რაოდენობა
Maximum hatch line segments to use
@@ -2195,7 +2195,7 @@ Each unit is approx. 0.1 mm wide
Show Center Marks
- Show Center Marks
+ ცენტრის სანიშნების ჩვენება
Detail View Outline Shape
@@ -2243,11 +2243,11 @@ Each unit is approx. 0.1 mm wide
Line style of detail highlight on base view
- Line style of detail highlight on base view
+ ბაზისურ ხედზე მდებარე დეტალის გამოკვეთის ხაზის სტილი
Detail Highlight Style
- Detail Highlight Style
+ ნაწილის გამოკვეთის სტილი
<html><head/><body><p><span style=" font-weight:600;">Note:</span> Items in <span style=" font-style:italic;">italics</span> are default values for new objects. They have no effect on existing objects.</p></body></html>
@@ -2314,7 +2314,7 @@ Each unit is approx. 0.1 mm wide
Background color around pages
- Background color around pages
+ გვერდების გარშემო ფონის ფერი
Hatch
@@ -2334,11 +2334,11 @@ Each unit is approx. 0.1 mm wide
Geometric Hatch
- Geometric Hatch
+ გეომეტრიული დაშტრიხვა
Geometric hatch pattern color
- Geometric hatch pattern color
+ გეომეტრიული დაშტრიხვის შაბლონის ფერი
Centerline
@@ -2417,7 +2417,7 @@ Each unit is approx. 0.1 mm wide
Standard and Style
- Standard and Style
+ სტანდარტი და სტილი
Arrowhead style
@@ -2469,7 +2469,7 @@ Each unit is approx. 0.1 mm wide
Alternate Decimals
- Alternate Decimals
+ მძიმის შემდეგ ციფრების რაოდენობა
Font Size
@@ -2526,7 +2526,7 @@ This can slow down the response time.
Keep Page Up To Date
- Keep Page Up To Date
+ გვერდის ავტომატური განახლება
Automatically distribute secondary views
@@ -2618,7 +2618,7 @@ for ProjectionGroups
Template Directory
- Template Directory
+ შაბლონების საქაღალდე
Starting directory for menu 'Insert Page using Template'
@@ -2626,11 +2626,11 @@ for ProjectionGroups
Hatch Pattern File
- Hatch Pattern File
+ დაშტრიხვის შაბლონის ფაილი
Default SVG or bitmap file for hatching
- Default SVG or bitmap file for hatching
+ ნაგულისხმევი SVG ან რასტრული გამოსახულება დაშტრიხვისთვის
Line Group File
@@ -2654,7 +2654,7 @@ for ProjectionGroups
Default PAT pattern definition file for geometric hatching
- Default PAT pattern definition file for geometric hatching
+ ნაგულისხმევი PAT შაბლონიგამოსახულების დაშტრიხვისთვის
Pattern Name
@@ -2774,7 +2774,7 @@ Fast, but result is a collection of short straight lines.
Default scale for new pages
- Default scale for new pages
+ ახალი გვერდების ნაგულისხმევი მასშტაბი
View Scale Type
@@ -2818,7 +2818,7 @@ Fast, but result is a collection of short straight lines.
Center Mark Scale
- Center Mark Scale
+ ცენტრის სანიშნის მასშტაბი
Size of center marks. Multiplier of vertex size.
@@ -2826,7 +2826,7 @@ Fast, but result is a collection of short straight lines.
Template Edit Mark
- Template Edit Mark
+ შაბლონის ჩასწორების ნიშანი
Multiplier for size of welding symbols
@@ -2849,7 +2849,7 @@ Fast, but result is a collection of short straight lines.
TechDrawGui::MDIViewPage
Toggle &Keep Updated
- Toggle &Keep Updated
+ განახლებადობის &ჩართ/გამორთ
Toggle &Frames
@@ -2962,7 +2962,7 @@ Do you want to continue?
Fontsize for 'Text'
- Fontsize for 'Text'
+ 'ტექსტის' ფონტის ზომა
Bubble Shape:
@@ -3264,7 +3264,7 @@ Do you want to continue?
Click to drag detail highlight to new position
- Click to drag detail highlight to new position
+ დეტალის გამოკვეთის გადასათრევად დააწკაპუნეთ
Drag Highlight
@@ -3276,7 +3276,7 @@ Do you want to continue?
x position of detail highlight within view
- x position of detail highlight within view
+ ხედზე დეტალის გამოკვეთის X მდებარეობა
scale factor for detail view
@@ -3308,7 +3308,7 @@ Do you want to continue?
y position of detail highlight within view
- y position of detail highlight within view
+ ხედზე დეტალის გამოკვეთის Y მდებარეობა
Page: scale factor of page is used
@@ -3451,7 +3451,7 @@ be used instead if the dimension value
Fontsize for 'Text'
- Fontsize for 'Text'
+ 'ტექსტის' ფონტის ზომა
Drawing Style:
@@ -3489,15 +3489,15 @@ be used instead if the dimension value
TechDrawGui::TaskGeomHatch
Apply Geometric Hatch to Face
- Apply Geometric Hatch to Face
+ ზედაპირზე გეომეტრიული დაშტრიხვის გადატარება
Define your pattern
- Define your pattern
+ აღწერეთ თქვენი შაბლონი
The PAT file containing your pattern
- The PAT file containing your pattern
+ თქვენი შაბლონის შემცველი PAT ფაილი
Pattern File
@@ -3521,34 +3521,34 @@ be used instead if the dimension value
Name of pattern within file
- Name of pattern within file
+ შაბლონის სახელი ფაილში
Color of pattern lines
- Color of pattern lines
+ დაშტრიხვის შაბლონის ფერი
Enlarges/shrinks the pattern
- Enlarges/shrinks the pattern
+ შაბლონის გადიდება/დაპატარავება
Thickness of lines within the pattern
- Thickness of lines within the pattern
+ ამ შაბლონში ხაზების სისქე
TechDrawGui::TaskHatch
Apply Hatch to Face
- Apply Hatch to Face
+ ზედაპირზე დაშტრიხვის გადატარება
Define your pattern
- Define your pattern
+ აღწერეთ თქვენი შაბლონი
The PAT file containing your pattern
- The PAT file containing your pattern
+ თქვენი შაბლონის შემცველი PAT ფაილი
Pattern File
@@ -3556,7 +3556,7 @@ be used instead if the dimension value
Color of pattern lines
- Color of pattern lines
+ დაშტრიხვის შაბლონის ფერი
Line Color
@@ -3564,7 +3564,7 @@ be used instead if the dimension value
Enlarges/shrinks the pattern
- Enlarges/shrinks the pattern
+ შაბლონის გადიდება/დაპატარავება
Pattern Scale
@@ -3832,7 +3832,7 @@ You can pick further points to get line segments.
Scale Denominator
- Scale Denominator
+ მასშტაბის მნიშვნელი
Adjust Primary Direction
@@ -3984,7 +3984,7 @@ using the given X/Y Spacing
Start Rich Text Editor
- Start Rich Text Editor
+ ტექსტის ფორმატირება
Show Frame
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm
index b632bdd73f..b57a1e513f 100644
Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm differ
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts
index 7c0f28b43f..3b3b6dac51 100644
--- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts
+++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts
@@ -6,42 +6,42 @@
Copy View
- Copy View
+ Skopiuj widok
Copy a View to a second Page
- Copy a View to a second Page
+ Kopiowanie widoku na drugą stronę
Copy View to a second Page
- Copy View to a second Page
+ Skopiuj widok do drugiej strony
Select View to copy from list.
- Select View to copy from list.
+ Wybierz widok do skopiowania z listy.
Select View
- Select View
+ Wybierz widok
Select From Page.
- Select From Page.
+ Wybierz ze strony.
Select Page
- Select Page
+ Wybierz stronę
Select To Page.
- Select To Page.
+ Wybierz na stronę.
@@ -49,42 +49,42 @@
Move View
- Move View
+ Przesuń widok
Move a View to a new Page
- Move a View to a new Page
+ Przenieś widok na nową stronę
Move View to a different Page
- Move View to a different Page
+ Przenieś widok na inną stronę
Select View to move from list.
- Select View to move from list.
+ Wybierz widok aby przenieść z listy.
Select View
- Select View
+ Wybierz widok
Select From Page.
- Select From Page.
+ Wybierz ze strony.
Select Page
- Select Page
+ Wybierz stronę
Select To Page.
- Select To Page.
+ Wybierz na stronę.
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm
index 954dfe2b7f..32a31c1b50 100644
Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.qm differ
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts
index e98ccf4f68..f69d45bf1d 100644
--- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts
+++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts
@@ -6,42 +6,42 @@
Copy View
- Copy View
+ Копировать вид
Copy a View to a second Page
- Copy a View to a second Page
+ Скопировать вид на вторую страницу
Copy View to a second Page
- Copy View to a second Page
+ Скопировать вид на вторую страницу
Select View to copy from list.
- Select View to copy from list.
+ Выберите Вид для копирования из списка.
Select View
- Select View
+ Выбрать вид
Select From Page.
- Select From Page.
+ Выберите со страницы.
Select Page
- Select Page
+ Выбрать страницу
Select To Page.
- Select To Page.
+ Выберите для страницы.
@@ -49,42 +49,42 @@
Move View
- Move View
+ Переместить вид
Move a View to a new Page
- Move a View to a new Page
+ Переместить Вид на новую Страницу
Move View to a different Page
- Move View to a different Page
+ Переместить Вид на другую Страницу
Select View to move from list.
- Select View to move from list.
+ Выберите Вид для удаления из списка.
Select View
- Select View
+ Выбрать вид
Select From Page.
- Select From Page.
+ Выберите со страницы.
Select Page
- Select Page
+ Выбрать страницу
Select To Page.
- Select To Page.
+ Выберите для страницы.
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm
index b3df76f08e..da13db942e 100644
Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.qm differ
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts
index 36f4994994..cde5242ff0 100644
--- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts
+++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts
@@ -6,42 +6,42 @@
Copy View
- Copy View
+ Kopiraj pogled
Copy a View to a second Page
- Copy a View to a second Page
+ Kopiraj pogled na drugo stran
Copy View to a second Page
- Copy View to a second Page
+ Kopiraj pogled na drugo stran
Select View to copy from list.
- Select View to copy from list.
+ Pogled za kopiranje izberite s seznama.
Select View
- Select View
+ Izberite pogled
Select From Page.
- Select From Page.
+ Izberite s strani.
Select Page
- Select Page
+ Izberite stran
Select To Page.
- Select To Page.
+ Izberite na stran.
@@ -49,42 +49,42 @@
Move View
- Move View
+ Premakni pogled
Move a View to a new Page
- Move a View to a new Page
+ Premakni pogled na novo stran
Move View to a different Page
- Move View to a different Page
+ Premakni pogled na drugo stran
Select View to move from list.
- Select View to move from list.
+ Pogled za prestavitev izberite s seznama.
Select View
- Select View
+ Izberite pogled
Select From Page.
- Select From Page.
+ Izberite s strani.
Select Page
- Select Page
+ Izberite stran
Select To Page.
- Select To Page.
+ Izberite na stran.
@@ -359,11 +359,11 @@
Insert Draft Workbench Object
- Vstavi predmet iz delovnega okolja Osnutek
+ Vstavi predmet iz izrisnega (Draft) delovnega okolja
Insert a View of a Draft Workbench object
- Vstavi Pogled predmeta iz delovnega okolja Osnutek
+ Vstavi Pogled predmeta iz izrisnega (Draft) delovnega okolja
@@ -875,7 +875,7 @@
Create DraftView
- Ustvari PogledOsnutka
+ Ustvari izrisni (Draft) pogled
Create ArchView
@@ -1257,7 +1257,7 @@
There were no DraftWB objects in the selection.
- V izboru ni bilo nobenega predmeta delovnega okolja Osnutki.
+ V izboru ni bilo nobenega predmeta izrisnega (Draft) delovnega okolja.
Please select only 1 Arch Section.
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.qm
index ac423fc806..0d5c4b8dfd 100644
Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.qm differ
diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts
index e568256890..24a9b42576 100644
--- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts
+++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts
@@ -6,42 +6,42 @@
Copy View
- Copy View
+ Копіювати Вигляд
Copy a View to a second Page
- Copy a View to a second Page
+ Скопіювати Вигляд на другу сторінку
Copy View to a second Page
- Copy View to a second Page
+ Скопіювати Вигляд на другу сторінку
Select View to copy from list.
- Select View to copy from list.
+ Виберіть Вигляд для копіювання зі списку.
Select View
- Select View
+ Виберіть вид
Select From Page.
- Select From Page.
+ Оберіть із Сторінки.
Select Page
- Select Page
+ Вибрати сторінку
Select To Page.
- Select To Page.
+ Оберіть із Сторінки.
@@ -49,42 +49,42 @@
Move View
- Move View
+ Перемістити вид
Move a View to a new Page
- Move a View to a new Page
+ Скопіювати Вигляд на другу сторінку
Move View to a different Page
- Move View to a different Page
+ Перемістити Вид на іншу сторінку
Select View to move from list.
- Select View to move from list.
+ Виберіть вид для переміщення зі списку.
Select View
- Select View
+ Виберіть вид
Select From Page.
- Select From Page.
+ Оберіть із Сторінки.
Select Page
- Select Page
+ Вибрати сторінку
Select To Page.
- Select To Page.
+ Оберіть із Сторінки.