diff --git a/src/Mod/ReverseEngineering/App/AppReverseEngineering.cpp b/src/Mod/ReverseEngineering/App/AppReverseEngineering.cpp
index ca4848c8e5..858fb90edd 100644
--- a/src/Mod/ReverseEngineering/App/AppReverseEngineering.cpp
+++ b/src/Mod/ReverseEngineering/App/AppReverseEngineering.cpp
@@ -999,7 +999,7 @@ PyMOD_INIT_FUNC(ReverseEngineering)
     }
 
     PyObject* mod = Reen::initModule();
-    Base::Console().log("Loading ReverseEngineering module... done\n");
+    Base::Console().log("Loading ReverseEngineering module… done\n");
     PyMOD_Return(mod);
 }
 // clang-format on
diff --git a/src/Mod/ReverseEngineering/App/RegionGrowing.cpp b/src/Mod/ReverseEngineering/App/RegionGrowing.cpp
index 75c98dd08e..c0c9b6c122 100644
--- a/src/Mod/ReverseEngineering/App/RegionGrowing.cpp
+++ b/src/Mod/ReverseEngineering/App/RegionGrowing.cpp
@@ -105,7 +105,7 @@ void RegionGrowing::perform(int ksearch)
 void RegionGrowing::perform(const std::vector<Base::Vector3f>& myNormals)
 {
     if (myPoints.size() != myNormals.size()) {
-        throw Base::RuntimeError("Number of points doesn't match with number of normals");
+        throw Base::RuntimeError("Number of points does not match with number of normals");
     }
 
     pcl::PointCloud<pcl::PointXYZ>::Ptr cloud(new pcl::PointCloud<pcl::PointXYZ>);
diff --git a/src/Mod/ReverseEngineering/Gui/AppReverseEngineeringGui.cpp b/src/Mod/ReverseEngineering/Gui/AppReverseEngineeringGui.cpp
index ef9ec5e51d..3ae29c3393 100644
--- a/src/Mod/ReverseEngineering/Gui/AppReverseEngineeringGui.cpp
+++ b/src/Mod/ReverseEngineering/Gui/AppReverseEngineeringGui.cpp
@@ -82,7 +82,7 @@ PyMOD_INIT_FUNC(ReverseEngineeringGui)
     }
 
     PyObject* mod = ReverseEngineeringGui::initModule();
-    Base::Console().log("Loading GUI of ReverseEngineering module... done\n");
+    Base::Console().log("Loading GUI of ReverseEngineering module… done\n");
 
     // instantiating the commands
     CreateReverseEngineeringCommands();
diff --git a/src/Mod/ReverseEngineering/Gui/Command.cpp b/src/Mod/ReverseEngineering/Gui/Command.cpp
index 09b72958e6..0eb065d0b1 100644
--- a/src/Mod/ReverseEngineering/Gui/Command.cpp
+++ b/src/Mod/ReverseEngineering/Gui/Command.cpp
@@ -68,8 +68,8 @@ CmdApproxCurve::CmdApproxCurve()
 {
     sAppModule = "Reen";
     sGroup = QT_TR_NOOP("Reverse Engineering");
-    sMenuText = QT_TR_NOOP("Approximate B-spline curve...");
-    sToolTipText = QT_TR_NOOP("Approximate a B-spline curve");
+    sMenuText = QT_TR_NOOP("Approximate B-Spline Curve…");
+    sToolTipText = QT_TR_NOOP("Approximates a B-spline curve");
     sWhatsThis = "Reen_ApproxCurve";
     sStatusTip = sToolTipText;
 }
@@ -81,7 +81,7 @@ void CmdApproxCurve::activated(int)
     if (obj.size() != 1 || !(obj.at(0)->isDerivedFrom<Points::Feature>())) {
         QMessageBox::warning(Gui::getMainWindow(),
                              qApp->translate("Reen_ApproxSurface", "Wrong selection"),
-                             qApp->translate("Reen_ApproxSurface", "Please select a point cloud."));
+                             qApp->translate("Reen_ApproxSurface", "Select a point cloud."));
         return;
     }
 
@@ -101,8 +101,8 @@ CmdApproxSurface::CmdApproxSurface()
 {
     sAppModule = "Reen";
     sGroup = QT_TR_NOOP("Reverse Engineering");
-    sMenuText = QT_TR_NOOP("Approximate B-spline surface...");
-    sToolTipText = QT_TR_NOOP("Approximate a B-spline surface");
+    sMenuText = QT_TR_NOOP("Approximate B-Spline Surface…");
+    sToolTipText = QT_TR_NOOP("Approximates a B-spline surface");
     sWhatsThis = "Reen_ApproxSurface";
     sStatusTip = sToolTipText;
     sPixmap = "actions/FitSurface";
@@ -119,7 +119,7 @@ void CmdApproxSurface::activated(int)
         QMessageBox::warning(
             Gui::getMainWindow(),
             qApp->translate("Reen_ApproxSurface", "Wrong selection"),
-            qApp->translate("Reen_ApproxSurface", "Please select a point cloud or mesh."));
+            qApp->translate("Reen_ApproxSurface", "Select a point cloud or mesh."));
         return;
     }
 
@@ -140,7 +140,7 @@ CmdApproxPlane::CmdApproxPlane()
     sAppModule = "Reen";
     sGroup = QT_TR_NOOP("Reverse Engineering");
     sMenuText = QT_TR_NOOP("Plane");
-    sToolTipText = QT_TR_NOOP("Approximate a plane");
+    sToolTipText = QT_TR_NOOP("Approximates a plane");
     sWhatsThis = "Reen_ApproxPlane";
     sStatusTip = sToolTipText;
 }
@@ -248,7 +248,7 @@ CmdApproxCylinder::CmdApproxCylinder()
     sAppModule = "Reen";
     sGroup = QT_TR_NOOP("Reverse Engineering");
     sMenuText = QT_TR_NOOP("Cylinder");
-    sToolTipText = QT_TR_NOOP("Approximate a cylinder");
+    sToolTipText = QT_TR_NOOP("Approximates a cylinder");
     sWhatsThis = "Reen_ApproxCylinder";
     sStatusTip = sToolTipText;
 }
@@ -316,7 +316,7 @@ CmdApproxSphere::CmdApproxSphere()
     sAppModule = "Reen";
     sGroup = QT_TR_NOOP("Reverse Engineering");
     sMenuText = QT_TR_NOOP("Sphere");
-    sToolTipText = QT_TR_NOOP("Approximate a sphere");
+    sToolTipText = QT_TR_NOOP("Approximates a sphere");
     sWhatsThis = "Reen_ApproxSphere";
     sStatusTip = sToolTipText;
 }
@@ -363,8 +363,8 @@ CmdApproxPolynomial::CmdApproxPolynomial()
 {
     sAppModule = "Reen";
     sGroup = QT_TR_NOOP("Reverse Engineering");
-    sMenuText = QT_TR_NOOP("Polynomial surface");
-    sToolTipText = QT_TR_NOOP("Approximate a polynomial surface");
+    sMenuText = QT_TR_NOOP("Polynomial Surface");
+    sToolTipText = QT_TR_NOOP("Approximates a polynomial surface");
     sWhatsThis = "Reen_ApproxPolynomial";
     sStatusTip = sToolTipText;
 }
@@ -421,8 +421,8 @@ CmdSegmentation::CmdSegmentation()
 {
     sAppModule = "Reen";
     sGroup = QT_TR_NOOP("Reverse Engineering");
-    sMenuText = QT_TR_NOOP("Mesh segmentation...");
-    sToolTipText = QT_TR_NOOP("Create mesh segments");
+    sMenuText = QT_TR_NOOP("Mesh Segmentation…");
+    sToolTipText = QT_TR_NOOP("Creates mesh segments");
     sWhatsThis = "Reen_Segmentation";
     sStatusTip = sToolTipText;
 }
@@ -453,8 +453,8 @@ CmdSegmentationManual::CmdSegmentationManual()
 {
     sAppModule = "Reen";
     sGroup = QT_TR_NOOP("Reverse Engineering");
-    sMenuText = QT_TR_NOOP("Manual segmentation...");
-    sToolTipText = QT_TR_NOOP("Create mesh segments manually");
+    sMenuText = QT_TR_NOOP("Manual Segmentation…");
+    sToolTipText = QT_TR_NOOP("Creates mesh segments manually");
     sWhatsThis = "Reen_SegmentationManual";
     sStatusTip = sToolTipText;
 }
@@ -483,8 +483,8 @@ CmdSegmentationFromComponents::CmdSegmentationFromComponents()
 {
     sAppModule = "Reen";
     sGroup = QT_TR_NOOP("Reverse Engineering");
-    sMenuText = QT_TR_NOOP("From components");
-    sToolTipText = QT_TR_NOOP("Create mesh segments from components");
+    sMenuText = QT_TR_NOOP("From Components");
+    sToolTipText = QT_TR_NOOP("Creates mesh segments from components");
     sWhatsThis = "Reen_SegmentationFromComponents";
     sStatusTip = sToolTipText;
 }
@@ -533,8 +533,8 @@ CmdMeshBoundary::CmdMeshBoundary()
 {
     sAppModule = "Reen";
     sGroup = QT_TR_NOOP("Reverse Engineering");
-    sMenuText = QT_TR_NOOP("Wire from mesh boundary...");
-    sToolTipText = QT_TR_NOOP("Create wire from mesh boundaries");
+    sMenuText = QT_TR_NOOP("Wire From Mesh Boundary…");
+    sToolTipText = QT_TR_NOOP("Creates a wire from mesh boundaries");
     sWhatsThis = "Reen_Segmentation";
     sStatusTip = sToolTipText;
 }
@@ -598,7 +598,7 @@ CmdPoissonReconstruction::CmdPoissonReconstruction()
 {
     sAppModule = "Reen";
     sGroup = QT_TR_NOOP("Reverse Engineering");
-    sMenuText = QT_TR_NOOP("Poisson...");
+    sMenuText = QT_TR_NOOP("Poisson…");
     sToolTipText = QT_TR_NOOP("Poisson surface reconstruction");
     sWhatsThis = "Reen_PoissonReconstruction";
     sStatusTip = sToolTipText;
@@ -610,10 +610,9 @@ void CmdPoissonReconstruction::activated(int)
     std::vector<App::DocumentObject*> obj =
         Gui::Selection().getObjectsOfType(Points::Feature::getClassTypeId());
     if (obj.size() != 1) {
-        QMessageBox::warning(
-            Gui::getMainWindow(),
-            qApp->translate("Reen_ApproxSurface", "Wrong selection"),
-            qApp->translate("Reen_ApproxSurface", "Please select a single point cloud."));
+        QMessageBox::warning(Gui::getMainWindow(),
+                             qApp->translate("Reen_ApproxSurface", "Wrong selection"),
+                             qApp->translate("Reen_ApproxSurface", "Select a single point cloud."));
         return;
     }
 
@@ -633,7 +632,7 @@ CmdViewTriangulation::CmdViewTriangulation()
 {
     sAppModule = "Reen";
     sGroup = QT_TR_NOOP("Reverse Engineering");
-    sMenuText = QT_TR_NOOP("Structured point clouds");
+    sMenuText = QT_TR_NOOP("Structured Point Clouds");
     sToolTipText = QT_TR_NOOP("Triangulation of structured point clouds");
     sStatusTip = QT_TR_NOOP("Triangulation of structured point clouds");
     sWhatsThis = "Reen_ViewTriangulation";
diff --git a/src/Mod/ReverseEngineering/Gui/FitBSplineCurve.ui b/src/Mod/ReverseEngineering/Gui/FitBSplineCurve.ui
index 4deef0e30d..2633f94f3f 100644
--- a/src/Mod/ReverseEngineering/Gui/FitBSplineCurve.ui
+++ b/src/Mod/ReverseEngineering/Gui/FitBSplineCurve.ui
@@ -11,7 +11,7 @@
    </rect>
   </property>
   <property name="windowTitle">
-   <string>Fit B-spline curve</string>
+   <string>Fit B-Spline Curve</string>
   </property>
   <layout class="QGridLayout" name="gridLayout_2">
    <item row="0" column="0">
diff --git a/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.cpp b/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.cpp
index de9da74cec..925c1c47e4 100644
--- a/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.cpp
+++ b/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.cpp
@@ -203,7 +203,7 @@ bool FitBSplineSurfaceWidget::accept()
                 QMessageBox::warning(
                     this,
                     tr("Wrong selection"),
-                    tr("Please select a single placement object to get local orientation."));
+                    tr("Select a single placement object to get local orientation."));
                 return false;
             }
 
diff --git a/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.ui b/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.ui
index e6c8516d95..3f43855c50 100644
--- a/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.ui
+++ b/src/Mod/ReverseEngineering/Gui/FitBSplineSurface.ui
@@ -11,13 +11,13 @@
    </rect>
   </property>
   <property name="windowTitle">
-   <string>Fit B-spline surface</string>
+   <string>Fit B-Spline Surface</string>
   </property>
   <layout class="QGridLayout" name="gridLayout_5">
    <item row="0" column="0">
     <widget class="QGroupBox" name="groupBoxU">
      <property name="title">
-      <string>u-Direction</string>
+      <string>U-Direction</string>
      </property>
      <layout class="QGridLayout" name="gridLayout">
       <item row="0" column="0">
@@ -84,7 +84,7 @@
    <item row="0" column="1">
     <widget class="QGroupBox" name="groupBoxV">
      <property name="title">
-      <string>v-Direction</string>
+      <string>V-Direction</string>
      </property>
      <layout class="QGridLayout" name="gridLayout_2">
       <item row="0" column="0">
@@ -228,7 +228,7 @@
       <item row="2" column="1">
        <widget class="QPushButton" name="makePlacement">
         <property name="text">
-         <string>Create placement</string>
+         <string>Create Placement</string>
         </property>
        </widget>
       </item>
@@ -244,7 +244,7 @@
          <item row="0" column="0">
           <widget class="QLabel" name="label_7">
            <property name="text">
-            <string>Total Weight</string>
+            <string>Total weight</string>
            </property>
            <property name="alignment">
             <set>Qt::AlignRight|Qt::AlignTrailing|Qt::AlignVCenter</set>
diff --git a/src/Mod/ReverseEngineering/Gui/Segmentation.ui b/src/Mod/ReverseEngineering/Gui/Segmentation.ui
index 9b98a70a49..b994fb24a3 100644
--- a/src/Mod/ReverseEngineering/Gui/Segmentation.ui
+++ b/src/Mod/ReverseEngineering/Gui/Segmentation.ui
@@ -11,7 +11,7 @@
    </rect>
   </property>
   <property name="windowTitle">
-   <string>Mesh segmentation</string>
+   <string>Mesh Segmentation</string>
   </property>
   <layout class="QGridLayout" name="gridLayout_2">
    <item row="0" column="0">
diff --git a/src/Mod/ReverseEngineering/Gui/SegmentationManual.ui b/src/Mod/ReverseEngineering/Gui/SegmentationManual.ui
index 437fb2f599..10d363031a 100644
--- a/src/Mod/ReverseEngineering/Gui/SegmentationManual.ui
+++ b/src/Mod/ReverseEngineering/Gui/SegmentationManual.ui
@@ -11,7 +11,7 @@
    </rect>
   </property>
   <property name="windowTitle">
-   <string>Manual segmentation</string>
+   <string>Manual Mesh Segmentation</string>
   </property>
   <layout class="QGridLayout" name="gridLayout">
    <item row="0" column="0">
@@ -95,7 +95,7 @@
       <item row="3" column="0">
        <widget class="QPushButton" name="selectTriangle">
         <property name="text">
-         <string>Pick triangle</string>
+         <string>Pick Triangle</string>
         </property>
        </widget>
       </item>
@@ -278,7 +278,7 @@
    <item row="4" column="0">
     <widget class="QGroupBox" name="groupBox_3">
      <property name="title">
-      <string>Region options</string>
+      <string>Region Options</string>
      </property>
      <layout class="QGridLayout" name="gridLayoutReg">
       <item row="0" column="0">
@@ -294,7 +294,7 @@
       <item row="1" column="0">
        <widget class="QCheckBox" name="screenTriangles">
         <property name="text">
-         <string>Respect only triangles with normals facing screen</string>
+         <string>Respect only triangles with screen-facing normals</string>
         </property>
         <property name="checked">
          <bool>true</bool>
diff --git a/src/Mod/ReverseEngineering/Gui/Workbench.cpp b/src/Mod/ReverseEngineering/Gui/Workbench.cpp
index 662f9fee6d..c0463a04df 100644
--- a/src/Mod/ReverseEngineering/Gui/Workbench.cpp
+++ b/src/Mod/ReverseEngineering/Gui/Workbench.cpp
@@ -50,7 +50,7 @@ Gui::MenuItem* Workbench::setupMenuBar() const
     reen->setCommand("&Reverse Engineering");
 
     Gui::MenuItem* reconstruct = new Gui::MenuItem();
-    reconstruct->setCommand("Surface reconstruction");
+    reconstruct->setCommand("Surface Reconstruction");
     *reconstruct << "Reen_PoissonReconstruction"
                  << "Reen_ViewTriangulation";
     *reen << reconstruct;