kindred/create
1
1
Fork 0
Code Issues 37 Pull Requests Actions Packages Projects 9 Releases 2 Wiki Activity

Path: Change Profile 'side' enumeration to inside/outside

Browse Source 
left/right was too ambiguous
correct profile direction set
This commit is contained in:
sliptonic
2017-07-08 15:50:51 -05:00
committed by Yorik van Havre
parent 48337e03c1
commit ddb2001dcb
5 changed files with 33 additions and 38 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
src/Mod/Path/PathScripts/PathProfileEdges.py
View File

@@ -82,7 +82,7 @@ class ObjectProfile:
# Profile Properties
obj.addProperty("App::PropertyEnumeration", "Side", "Profile", QtCore.QT_TRANSLATE_NOOP("App::Property", "Side of edge that tool should cut"))
obj.Side = ['Left', 'Right'] # side of profile that cutter is on in relation to direction of profile
obj.Side = ['Outside', 'Inside'] # side of profile that cutter is on in relation to direction of profile
obj.addProperty("App::PropertyEnumeration", "Direction", "Profile", QtCore.QT_TRANSLATE_NOOP("App::Property", "The direction that the toolpath should go around the part ClockWise CW or CounterClockWise CCW"))
obj.Direction = ['CW', 'CCW'] # this is the direction that the profile runs
obj.addProperty("App::PropertyBool", "UseComp", "Profile", QtCore.QT_TRANSLATE_NOOP("App::Property", "make True, if using Cutter Radius Compensation"))
@@ -163,7 +163,7 @@ class ObjectProfile:
'SectionCount': -1}
if obj.UseComp:
if obj.Side == 'Right':
if obj.Side == 'Inside':
profileparams['Offset'] = 0 - self.radius+obj.OffsetExtra.Value
else:
profileparams['Offset'] = self.radius+obj.OffsetExtra.Value
@@ -392,7 +392,7 @@ class CommandPathProfileEdges:
FreeCADGui.doCommand('obj.FinalDepth=' + str(zbottom))
FreeCADGui.doCommand('obj.SafeHeight = ' + str(ztop + 2.0))
FreeCADGui.doCommand('obj.Side = "Right"')
FreeCADGui.doCommand('obj.Side = "Inside"')
FreeCADGui.doCommand('obj.OffsetExtra = 0.0')
FreeCADGui.doCommand('obj.Direction = "CW"')
FreeCADGui.doCommand('obj.UseComp = True')