From de374cbdfa9f97bf17a82674baf2bdd80895705e Mon Sep 17 00:00:00 2001 From: Yorik van Havre Date: Mon, 10 Jan 2022 11:15:28 +0100 Subject: [PATCH] Updated ts files (after @chennes ludate fix) --- .../Resources/translations/AddonManager.ts | 258 ++++++++-- src/Mod/Draft/Resources/translations/Draft.ts | 186 ++++++- src/Mod/Fem/Gui/Resources/translations/Fem.ts | 39 +- .../Path/Gui/Resources/translations/Path.ts | 483 +++++++++++------- 4 files changed, 707 insertions(+), 259 deletions(-) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager.ts b/src/Mod/AddonManager/Resources/translations/AddonManager.ts index bcc82e4e5f..af71658171 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager.ts @@ -3,6 +3,11 @@ AddonsInstaller + + + Installed + + Version @@ -53,6 +58,16 @@ Installation location + + + WARNING: This addon is obsolete + + + + + WARNING: This addon is Python 2 Only + + Fetching README.md from package repository @@ -131,8 +146,18 @@ - - Installed + + updated + + + + + Updated + + + + + Author @@ -195,6 +220,21 @@ Preference Packs + + + Status: + + + + + Any + + + + + Not installed + + Filter @@ -205,11 +245,27 @@ OK + + + Error with encrypted connection + + Failed to connect to + + + Failed to connect to URL + + + + + Checking network connection... + + + Unable to download addon list. @@ -255,11 +311,41 @@ Failed to read metadata from + + + git pull failed for {wb.name} + + Done locating macros. + + + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. + + + + + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. + + + + + An error occurred fetching macros from GitHub + + + + + This macro is already installed. + + + + + Caching macro code... + + Retrieving description... @@ -300,21 +386,11 @@ This addon is marked as obsolete - - - This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - - This addon is marked as Python 2 Only - - - This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - - Retrieving macro description... @@ -330,11 +406,6 @@ Retrieving info from wiki - - - This macro is already installed. - - GitPython not found. Using standard download instead. @@ -370,26 +441,6 @@ A macro has been installed and is available under Macro -> Macros menu - - - Missing optional python module (doesn't prevent installing) - - - - - Some errors were found that prevent to install this workbench - - - - - Error updating module - - - - - Please fix manually - - Missing workbench @@ -400,11 +451,31 @@ Missing python module + + + Missing optional python module (doesn't prevent installing) + + + + + Some errors were found that prevent to install this workbench + + Please install the missing components first. + + + Error updating module + + + + + Please fix manually + + Error: Unable to locate zip from @@ -420,14 +491,49 @@ Successfully installed + + + Failed to execute pip. Returned error was: + + Retrieving package metadata... - - The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + Failed to repair missing .git directory + + + + + Repository URL + + + + + Clone directory + + + + + Checking connection + + + + + Checking for connection to GitHub... + + + + + Connection failed + + + + + Starting up... @@ -440,16 +546,6 @@ Addon manager - - - You must restart FreeCAD for changes to take effect. - - - - - You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. - - Restart now @@ -461,8 +557,13 @@ - - Addon Manager: Skipping update check because AutoCheck user preference is False + + Refresh local cache + + + + + Updating cache... @@ -475,6 +576,26 @@ Apply + + + The addons that can be installed here are not officially part of FreeCAD, and are not reviewed by the FreeCAD team. Make sure you know what you are installing! + + + + + You must restart FreeCAD for changes to take effect. + + + + + You must restart FreeCAD for changes to take effect. Press Ok to restart FreeCAD now, or Cancel to restart later. + + + + + Addon Manager: Skipping update check because AutoCheck user preference is False + + update(s) @@ -520,11 +641,6 @@ No updates available - - - Installation of macro failed - - All packages updates failed. Packages: @@ -535,6 +651,36 @@ Failed packages: + + + Missing Requirement + + + + + Installing dependencies + + + + + Installation of macro failed + + + + + Succeeded + + + + + All packages updates failed: + + + + + Failed + + Update report diff --git a/src/Mod/Draft/Resources/translations/Draft.ts b/src/Mod/Draft/Resources/translations/Draft.ts index 6a220d20e8..d300026621 100644 --- a/src/Mod/Draft/Resources/translations/Draft.ts +++ b/src/Mod/Draft/Resources/translations/Draft.ts @@ -656,13 +656,13 @@ This property is read-only, as the number depends on the points contained within - - The shape of this object + + The pattern rotation used by this object - - The pattern rotation used by this object + + The shape of this object @@ -1203,11 +1203,6 @@ beyond the dimension line Array tools - - - Unable to insert new object into a scaled part - - True @@ -1384,6 +1379,11 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction + + + Unable to insert new object into a scaled part + + Merge layer duplicates @@ -1410,6 +1410,19 @@ It creates a construction group if it doesn't exist. + + Draft_AddNamedGroup + + + Add a new named group + + + + + Add a new group with a given name. + + + Draft_AddPoint @@ -2066,6 +2079,11 @@ If the selection is a simple object inside a group, it will select the "bro those that are at the same level as this object, including the upper group that contains them all. + + + Selects the contents of selected groups. For selected non-group objects, the contents of the group they are in is selected. + + Draft_SelectPlane @@ -3834,6 +3852,131 @@ Not available if Draft preference option 'Use Part Primitives' is enab Set custom annotation scale in format x:x, x=x + + + Solids: + + + + + Faces: + + + + + Wires: + + + + + Edges: + + + + + Vertices: + + + + + Face + + + + + Wire + + + + + different types + + + + + Objects have different placements. Distance between the two base points: + + + + + has a different value + + + + + doesn't exist in one of the objects + + + + + %s shares a base with %d other objects. Please check if you want to modify this. + + + + + %s cannot be modified because its placement is readonly. + + + + + Wrong input: unknown document. + + + + + This function will be deprecated in + + + + + Please use + + + + + This function will be deprecated. + + + + + No graphical interface + + + + + Unable to insert new object into a scaled part + + + + + Symbol not implemented. Using a default symbol. + + + + + Visibility off; removed from list: + + + + + image is Null + + + + + filename does not exist on the system or in the resource file + + + + + unable to load texture + + + + + Does not have 'ViewObject.RootNode'. + + Task panel: @@ -4741,11 +4884,21 @@ To enabled FreeCAD to download these libraries, answer Yes. Add to group + + + Add new group + + Select group + + + No new selection. You must select non-empty groups or objects inside groups. + + Autogroup @@ -4761,6 +4914,21 @@ To enabled FreeCAD to download these libraries, answer Yes. Add to construction group + + + Add a new group with a given name + + + + + Add group + + + + + Group name + + Select an object to offset diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem.ts b/src/Mod/Fem/Gui/Resources/translations/Fem.ts index d9608c71f0..fea93c5ccd 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem.ts @@ -554,6 +554,19 @@ + + FEM_SolverCalculixCxxtools + + + Solver CalculiX Standard + + + + + Creates a standard FEM solver CalculiX with ccx tools + + + FEM_SolverControl @@ -567,19 +580,6 @@ - - FEM_SolverCxxtools - - - Solver CalculiX Standard - - - - - Creates a standard FEM solver CalculiX with ccx tools - - - FEM_SolverElmer @@ -691,6 +691,19 @@ + + FEM_SolverCxxtools + + + Solver CalculiX Standard + + + + + Creates a standard FEM solver CalculiX with ccx tools + + + CmdFemConstraintBearing diff --git a/src/Mod/Path/Gui/Resources/translations/Path.ts b/src/Mod/Path/Gui/Resources/translations/Path.ts index 4b14b52c71..e2a9dd3a06 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path.ts @@ -4,8 +4,13 @@ App::Property - - Show the temporary path construction objects when module is in DEBUG mode. + + Stop index(angle) for rotational scan + + + + + Additional offset to the selected bounding box @@ -18,21 +23,11 @@ Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - Stop index(angle) for rotational scan - - Dropcutter lines are created parallel to this axis. - - - Additional offset to the selected bounding box - - The model will be rotated around this axis. @@ -48,6 +43,21 @@ Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. + + + Convert co-planar arcs to G2/G3 gcode commands for `Circular` and `CircularZigZag` cut patterns. + + + + + Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. + + + + + Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. + + Avoid cutting the last 'N' faces in the Base Geometry list of selected faces. @@ -83,19 +93,24 @@ Cut internal feature areas within a larger selected face. + + + Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). + + Select the overall boundary for the operation. - - Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) + + Set to clear last layer in a `Multi-pass` operation. - - Set the geometric clearing pattern to use for the operation. + + Set the direction for the cutting tool to engage the material: Climb (ClockWise) or Conventional (CounterClockWise) @@ -113,11 +128,6 @@ Set the Z-axis depth offset from the target surface. - - - Complete the operation in a single pass at depth, or mulitiple passes to final depth. - - Set the start point for the cut pattern. @@ -128,11 +138,6 @@ Choose location of the center point for starting the cut pattern. - - - Profile the edges of the selection. - - Set the sampling resolution. Smaller values quickly increase processing time. @@ -153,11 +158,6 @@ Enable separate optimization of transitions between, and breaks within, each step over path. - - - Convert co-planar arcs to G2/G3 gcode commands for `Circular` and `CircularZigZag` cut patterns. - - Collinear and co-radial artifact gaps that are smaller than this threshold are closed in the path. @@ -169,8 +169,8 @@ - - The custom start point for the path of this operation + + Profile the edges of the selection. @@ -183,11 +183,6 @@ The path to be copied - - - The tool controller that will be used to calculate the path - - The base path to modify @@ -298,6 +293,11 @@ Make False, to prevent operation from generating code + + + The gcode to be inserted + + Ramping Method @@ -373,26 +373,6 @@ Exclude milling raised areas inside the face. - - - Smaller values yield a finer, more accurate the mesh. Smaller values increase processing time a lot. - - - - - Smaller values yield a finer, more accurate the mesh. Smaller values do not increase processing time much. - - - - - Select the algorithm to use: OCL Dropcutter*, or Experimental (Not OCL based). - - - - - Set to clear last layer in a `Multi-pass` operation. - - Ignore outer waterlines above this height. @@ -403,6 +383,11 @@ The base object this collision refers to + + + Show the temporary path construction objects when module is in DEBUG mode. + + Enter custom start point for slot path. @@ -413,6 +398,11 @@ Enter custom end point for slot path. + + + Set the geometric clearing pattern to use for the operation. + + Positive extends the beginning of the path, negative shortens. @@ -423,6 +413,11 @@ Positive extends the end of the path, negative shortens. + + + Complete the operation in a single pass at depth, or mulitiple passes to final depth. + + Choose the path orientation with regard to the feature(s) selected. @@ -448,6 +443,11 @@ Enable to reverse the cut direction of the slot path. + + + The custom start point for the path of this operation + + Use adaptive algorithm to eliminate excessive air milling above planar pocket top. @@ -463,6 +463,51 @@ Process the model and stock in an operation with no Base Geometry selected. + + + Comment or note for CNC program + + + + + Default speed for horizontal rapid moves. + + + + + Default speed for vertical rapid moves. + + + + + Coolant Modes + + + + + Default coolant mode. + + + + + Expression set for the SafeHeight of new operations. + + + + + Expression used for StartDepth of new operations. + + + + + Expression used for FinalDepth of new operations. + + + + + Expression used for StepDown of new operations. + + The direction that the toolpath should go around the part ClockWise (CW) or CounterClockWise (CCW) @@ -523,6 +568,11 @@ The spacing between the array copies in Linear pattern + + + The tool controller that will be used to calculate the path + + The number of copies in X direction in Linear pattern @@ -563,11 +613,51 @@ Maximum random offset of copies + + + Seed value for jitter randomness + + + + + The base object this stock is derived from + + A material for this object + + + Length of this stock box + + + + + Width of this stock box + + + + + Height of this stock box + + + + + Radius of this stock cylinder + + + + + Height of this stock cylinder + + + + + Internal representation of stock type + + Maximum distance before a miter join is truncated @@ -621,6 +711,11 @@ Edit + + + Issue determine drillability: {} + + Didn't find job %s @@ -856,14 +951,6 @@ - - PathCustom - - - The gcode to be inserted - - - PathDeburr @@ -972,6 +1059,19 @@ + + PathFixture + + + Fixture + + + + + Creates a Fixture Offset object + + + PathGeom @@ -1373,6 +1473,19 @@ If it is necessary to set the FinalDepth manually please select a different oper + + PathPlane + + + Selection Plane + + + + + Create a Selection Plane object + + + PathPocket @@ -1545,64 +1658,6 @@ If it is necessary to set the FinalDepth manually please select a different oper - - PathSetupSheet - - - Default speed for horizontal rapid moves. - - - - - Default speed for vertical rapid moves. - - - - - Coolant Modes - - - - - Default coolant mode. - - - - - The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. - - - - - Expression set for the SafeHeight of new operations. - - - - - The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. - - - - - Expression set for the ClearanceHeight of new operations. - - - - - Expression used for StartDepth of new operations. - - - - - Expression used for FinalDepth of new operations. - - - - - Expression used for StepDown of new operations. - - - PathSlot @@ -2295,14 +2350,6 @@ If it is necessary to set the FinalDepth manually please select a different oper - - PathUtils - - - Issue determine drillability: {} - - - PathVcarve @@ -2598,11 +2645,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_DressupDragKnife - - - Edit Dragknife Dress-up - - DragKnife Dress-up @@ -2633,6 +2675,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Dress-up + + + Edit Dragknife Dress-up + + Path_DressupLeadInOut @@ -2913,24 +2960,6 @@ If it is necessary to set the FinalDepth manually please select a different oper - - Path_Fixture - - - Fixture - - - - - Creates a Fixture Offset object - - - - - Create a Fixture Offset - - - Path_Helix @@ -3017,11 +3046,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Exports Path Job as a template to be used for other jobs - - - Create Job - - Edit Job @@ -3047,6 +3071,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Model Selection + + + Create Job + + Path_OpActiveToggle @@ -3064,19 +3093,6 @@ If it is necessary to set the FinalDepth manually please select a different oper - - Path_Plane - - - Selection Plane - - - - - Create a Selection Plane object - - - Path_Pocket @@ -3408,14 +3424,6 @@ If it is necessary to set the FinalDepth manually please select a different oper - - Path_SetupSheet - - - Edit SetupSheet - - - Path_SimpleCopy @@ -3599,6 +3607,119 @@ If it is necessary to set the FinalDepth manually please select a different oper + + PathCustom + + + The gcode to be inserted + + + + + PathSetupSheet + + + Default speed for horizontal rapid moves. + + + + + Default speed for vertical rapid moves. + + + + + The usage of this field depends on SafeHeightExpression - by default its value is added to StartDepth and used for SafeHeight of an operation. + + + + + Expression set for the SafeHeight of new operations. + + + + + The usage of this field depends on ClearanceHeightExpression - by default is value is added to StartDepth and used for ClearanceHeight of an operation. + + + + + Expression set for the ClearanceHeight of new operations. + + + + + Expression used for StartDepth of new operations. + + + + + Expression used for FinalDepth of new operations. + + + + + Expression used for StepDown of new operations. + + + + + Coolant Modes + + + + + Default coolant mode. + + + + + PathUtils + + + Issue determine drillability: {} + + + + + Path_Fixture + + + Fixture + + + + + Creates a Fixture Offset object + + + + + Create a Fixture Offset + + + + + Path_Plane + + + Selection Plane + + + + + Create a Selection Plane object + + + + + Path_SetupSheet + + + Edit SetupSheet + + + PathOpGui