diff --git a/src/App/Resources/translations/App_ca.ts b/src/App/Resources/translations/App_ca.ts index 7f86319876..5ad6b675d5 100644 --- a/src/App/Resources/translations/App_ca.ts +++ b/src/App/Resources/translations/App_ca.ts @@ -7,8 +7,7 @@ Stores the last user choice of whether to apply CopyOnChange setup to all links that reference the same configurable object - Stores the last user choice of whether to apply CopyOnChange setup to all links -that reference the same configurable object + Emmagatzema l'última tria de l'usuari sobre si aplicar la configuració de CopyOnChange (Copia al canviar) a tots els enllaços que fan referència al mateix objecte configurable @@ -24,32 +23,32 @@ that reference the same configurable object X-axis - X-axis + Eix-X Y-axis - Y-axis + Eix-Y Z-axis - Z-axis + Eix-Z XY-plane - XY-plane + Pla-XY XZ-plane - XZ-plane + Pla-XZ YZ-plane - YZ-plane + Pla-YZ diff --git a/src/App/Resources/translations/App_sv-SE.ts b/src/App/Resources/translations/App_sv-SE.ts index a79d2c6f6e..f6ebb77584 100644 --- a/src/App/Resources/translations/App_sv-SE.ts +++ b/src/App/Resources/translations/App_sv-SE.ts @@ -24,32 +24,32 @@ that reference the same configurable object X-axis - X-axis + X-axel Y-axis - Y-axis + Y-axel Z-axis - Z-axis + Z-axel XY-plane - XY-plane + XY plan XZ-plane - XZ-plane + XZ plan YZ-plane - YZ-plane + YZ plan diff --git a/src/Gui/Language/FreeCAD.ts b/src/Gui/Language/FreeCAD.ts index 9c236f9460..8322960507 100644 --- a/src/Gui/Language/FreeCAD.ts +++ b/src/Gui/Language/FreeCAD.ts @@ -6734,7 +6734,7 @@ Do you want to save your changes? Gui::MainWindow - + Dimension @@ -6764,32 +6764,32 @@ Do you want to save your changes? - + Toggles this toolbar - + Toggles this dockable window - - + + Unsaved document - + The exported object contains external link. Please save the documentat least once before exporting. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? @@ -10244,7 +10244,7 @@ the current copy will be lost. - + Unnamed diff --git a/src/Gui/Language/FreeCAD_be.ts b/src/Gui/Language/FreeCAD_be.ts index 3f25f539e5..ec564a2d07 100644 --- a/src/Gui/Language/FreeCAD_be.ts +++ b/src/Gui/Language/FreeCAD_be.ts @@ -6809,7 +6809,7 @@ Do you want to save your changes? Gui::MainWindow - + Dimension Вымярэнне @@ -6839,32 +6839,32 @@ Do you want to save your changes? Зачыніць усё - + Toggles this toolbar Пераключае панэль інструментаў - + Toggles this dockable window Пераключае ўбудаванае акно - - + + Unsaved document Незахаваны дакумент - + The exported object contains external link. Please save the documentat least once before exporting. Аб'ект, які экспартуецца, утрымлівае знешні спасылак. Калі ласка, захавайце дакумент хаця б адзін раз перад экспартаваннем. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Каб стварыць спасылак на знешнія аб'екты, дакумент павінен быць захаваны хаця б адзін раз. @@ -10347,7 +10347,7 @@ the current copy will be lost. - + Unnamed Без назвы diff --git a/src/Gui/Language/FreeCAD_ca.ts b/src/Gui/Language/FreeCAD_ca.ts index 3b14d479dd..9f885e8bd5 100644 --- a/src/Gui/Language/FreeCAD_ca.ts +++ b/src/Gui/Language/FreeCAD_ca.ts @@ -6805,7 +6805,7 @@ Do you want to save your changes? Gui::MainWindow - + Dimension Cota @@ -6835,32 +6835,32 @@ Do you want to save your changes? Tanca-ho tot - + Toggles this toolbar Commuta la barra d'eines - + Toggles this dockable window Commuta la finestra flotant - - + + Unsaved document El document no s'ha desat - + The exported object contains external link. Please save the documentat least once before exporting. L’objecte exportat conté un enllaç extern. Deseu el documenta almenys una vegada abans d’exportar-lo. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Per a enllaçar amb objectes externs, el document s’ha de desar almenys una vegada. @@ -10331,7 +10331,7 @@ la còpia actual es perdrà. - + Unnamed Sense nom diff --git a/src/Gui/Language/FreeCAD_cs.ts b/src/Gui/Language/FreeCAD_cs.ts index ed2ed350be..20e82c9d43 100644 --- a/src/Gui/Language/FreeCAD_cs.ts +++ b/src/Gui/Language/FreeCAD_cs.ts @@ -6815,7 +6815,7 @@ Chcete uložit provedené změny? Gui::MainWindow - + Dimension Rozměr @@ -6845,32 +6845,32 @@ Chcete uložit provedené změny? Zavřít vše - + Toggles this toolbar Přepíná panel nástrojů - + Toggles this dockable window Přepíná dokovatelný okna - - + + Unsaved document Neuložený dokument - + The exported object contains external link. Please save the documentat least once before exporting. Exportovaný objekt obsahuje externí odkaz. Před exportem uložte dokument alespoň jednou. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Pro propojení s externími objekty musí být dokument uložen alespoň jednou. @@ -10352,7 +10352,7 @@ na aktuální kopii budou ztraceny. - + Unnamed Nepojmenovaný diff --git a/src/Gui/Language/FreeCAD_de.ts b/src/Gui/Language/FreeCAD_de.ts index c33642f2f1..44dcaee280 100644 --- a/src/Gui/Language/FreeCAD_de.ts +++ b/src/Gui/Language/FreeCAD_de.ts @@ -6805,7 +6805,7 @@ Sollen die Änderungen gespeichert werden? Gui::MainWindow - + Dimension Abmessung @@ -6835,32 +6835,32 @@ Sollen die Änderungen gespeichert werden? Alles schließen - + Toggles this toolbar Symbolleiste ein-/ausschalten - + Toggles this dockable window Andockbares Fenster ein-/ausschalten - - + + Unsaved document Nicht gespeichertes Dokument - + The exported object contains external link. Please save the documentat least once before exporting. Das exportierte Objekt enthält einen externen Link. Bitte speichern Sie das Dokument mindestens einmal vor dem Exportieren. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Um zu externen Objekten zu verlinken, muss das Dokument mindestens einmal gespeichert werden. @@ -10341,7 +10341,7 @@ the current copy will be lost. - + Unnamed Unbenannt diff --git a/src/Gui/Language/FreeCAD_el.ts b/src/Gui/Language/FreeCAD_el.ts index a4ccd53953..2f257da8db 100644 --- a/src/Gui/Language/FreeCAD_el.ts +++ b/src/Gui/Language/FreeCAD_el.ts @@ -6814,7 +6814,7 @@ Do you want to save your changes? Gui::MainWindow - + Dimension Διάσταση @@ -6844,32 +6844,32 @@ Do you want to save your changes? Κλείσιμο Όλων - + Toggles this toolbar Εναλλάσσει την λειτουργία εμφάνισης/απόκρυψης αυτής της γραμμής εργαλείων - + Toggles this dockable window Εναλλάσσει την λειτουργία εμφάνισης/απόκρυψης αυτού του προσδέσιμου παραθύρου - - + + Unsaved document Μη αποθηκευμένο έγγραφο - + The exported object contains external link. Please save the documentat least once before exporting. The exported object contains external link. Please save the documentat least once before exporting. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? To link to external objects, the document must be saved at least once. @@ -10351,7 +10351,7 @@ the current copy will be lost. - + Unnamed Ανώνυμο diff --git a/src/Gui/Language/FreeCAD_es-AR.ts b/src/Gui/Language/FreeCAD_es-AR.ts index ea8c9e490c..4385cf11bf 100644 --- a/src/Gui/Language/FreeCAD_es-AR.ts +++ b/src/Gui/Language/FreeCAD_es-AR.ts @@ -85,7 +85,7 @@ Run test cases to verify console messages - Ejecutar casos de prueba para verificar los mensajes de consola + Ejecutar tests de prueba para verificar los mensajes de la consola @@ -98,7 +98,7 @@ Clear all visible measurements - Borrar todas las mediciones visibles + Suprimir todas las mediciones visibles @@ -222,7 +222,7 @@ Toggle selectability - Conmutar selectividad + Alternar seleccionabilidad @@ -772,7 +772,7 @@ mientras hace un clic izquierdo o derecho y mueve el mouse hacia arriba o hacia Do you want to clear it now? - ¿Deseas borrarlo ahora? + ¿Quieres borrarlo ahora? @@ -1277,7 +1277,7 @@ Si no está marcado, entonces la propiedad debe tener un nombre único y se acce &New shortcut: - Nuevo atajo: + &Nuevo acceso directo: @@ -1375,7 +1375,7 @@ same time. The one with the highest priority will be triggered. Shortcut - Atajo + Atajo de teclado @@ -1483,7 +1483,7 @@ same time. The one with the highest priority will be triggered. <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> Los cambios se activarán la próxima vez que cargue el entorno apropiado</p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Nota:</span> Los cambios se activarán la próxima vez que cargue el banco de trabajo apropiado</p></body></html> @@ -6811,7 +6811,7 @@ Desea guardar los cambios? Gui::MainWindow - + Dimension Cota @@ -6841,32 +6841,32 @@ Desea guardar los cambios? Cerrar todo - + Toggles this toolbar Alterna esta barra de herramientas - + Toggles this dockable window Alterna esta ventana acoplable - - + + Unsaved document Documento sin guardar - + The exported object contains external link. Please save the documentat least once before exporting. El objeto exportado contiene un vínculo externo. Por favor, guarde el documento al menos una vez antes de exportar. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Para vincular a objetos externos, el documento debe guardarse al menos una vez. @@ -8464,7 +8464,7 @@ Do you want to specify another directory? Workbenches - Entornos de trabajo + Bancos de trabajo @@ -10345,7 +10345,7 @@ la copia actual se perderá. - + Unnamed Sin nombre @@ -10966,7 +10966,7 @@ la copia actual se perderá. Toggle selectability - Conmutar selectividad + Alternar seleccionabilidad @@ -11568,7 +11568,7 @@ la copia actual se perderá. Workbench - Entorno de trabajo + Banco de trabajo @@ -12106,7 +12106,7 @@ Por favor, compruebe la Vista de Reportes para más detalles. Workbench - Entorno de trabajo + Banco de trabajo @@ -12377,7 +12377,7 @@ Por favor, compruebe la Vista de Reportes para más detalles. Available Workbenches - Entornos de trabajo disponibles + Bancos de trabajo disponibles @@ -12395,7 +12395,7 @@ Actualmente, su sistema tiene los siguientes bancos de trabajo:</p></bo Choose which workbench will be activated and shown after FreeCAD launches - Elige cuál entorno de trabajo se activará y mostrará al iniciar FreeCAD + Elige cuál banco de trabajo se activará y mostrará al iniciar FreeCAD diff --git a/src/Gui/Language/FreeCAD_es-ES.ts b/src/Gui/Language/FreeCAD_es-ES.ts index 2355d22e7b..9c8c7ee6bb 100644 --- a/src/Gui/Language/FreeCAD_es-ES.ts +++ b/src/Gui/Language/FreeCAD_es-ES.ts @@ -6813,7 +6813,7 @@ Desea guardar los cambios? Gui::MainWindow - + Dimension Cota @@ -6843,32 +6843,32 @@ Desea guardar los cambios? Cerrar todo - + Toggles this toolbar Muestra u oculta la barra de herramientas - + Toggles this dockable window Alterna esta ventana acoplable - - + + Unsaved document Documento sin guardar - + The exported object contains external link. Please save the documentat least once before exporting. El objeto exportado contiene un vínculo externo. Por favor, guarde el documento al menos una vez antes de exportar. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Para vincular a objetos externos, el documento debe guardarse al menos una vez. @@ -10347,7 +10347,7 @@ la copia actual se perderá. - + Unnamed Sin nombre diff --git a/src/Gui/Language/FreeCAD_eu.ts b/src/Gui/Language/FreeCAD_eu.ts index 131cb0c754..bcc0a64daa 100644 --- a/src/Gui/Language/FreeCAD_eu.ts +++ b/src/Gui/Language/FreeCAD_eu.ts @@ -6824,7 +6824,7 @@ Aldaketak gorde nahi dituzu? Gui::MainWindow - + Dimension Kota @@ -6854,32 +6854,32 @@ Aldaketak gorde nahi dituzu? Itxi dena - + Toggles this toolbar Tresna-barra hau aktibatzen/desaktibatzen du - + Toggles this dockable window Aktibatu/desaktibatu leiho atrakagarri hau - - + + Unsaved document Gorde gabeko dokumentua - + The exported object contains external link. Please save the documentat least once before exporting. Esportatutako objektuak kanpoko estekak ditu. Gorde dokumentua gutxienez behin hura esportatu baino lehen. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Kanpoko objektuekin estekatzeko, dokumentua gutxienez behin gorde behar da. @@ -10362,7 +10362,7 @@ egindako aldaketak galdu egingo direla. - + Unnamed Izenik gabea diff --git a/src/Gui/Language/FreeCAD_fi.ts b/src/Gui/Language/FreeCAD_fi.ts index 83678d7d58..a398241725 100644 --- a/src/Gui/Language/FreeCAD_fi.ts +++ b/src/Gui/Language/FreeCAD_fi.ts @@ -6822,7 +6822,7 @@ Do you want to save your changes? Gui::MainWindow - + Dimension Mitta @@ -6852,32 +6852,32 @@ Do you want to save your changes? Sulje kaikki - + Toggles this toolbar Näyttä tai piilota tämä työkalurivi - + Toggles this dockable window Näytä tai piilota telakointiasema ikkunasta - - + + Unsaved document Tallentamaton asiakirja - + The exported object contains external link. Please save the documentat least once before exporting. Viety objekti sisältää ulkoisen linkin. Tallenna asiakirja vähintään kerran ennen vientiä. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Linkittääksesi ulkoisiin objekteihin, asiakirja on tallennettava vähintään kerran. @@ -10358,7 +10358,7 @@ the current copy will be lost. - + Unnamed Nimetön diff --git a/src/Gui/Language/FreeCAD_fr.ts b/src/Gui/Language/FreeCAD_fr.ts index 560e147d88..09bbe60f6a 100644 --- a/src/Gui/Language/FreeCAD_fr.ts +++ b/src/Gui/Language/FreeCAD_fr.ts @@ -6812,7 +6812,7 @@ Voulez enregistrer les modifications ? Gui::MainWindow - + Dimension Dimension @@ -6842,32 +6842,32 @@ Voulez enregistrer les modifications ? Fermer tout - + Toggles this toolbar Bascule cette barre d'outils - + Toggles this dockable window Bascule cette fenêtre dockable - - + + Unsaved document Document non sauvegardé - + The exported object contains external link. Please save the documentat least once before exporting. L'objet exporté contient un lien externe. Veuillez enregistrer le document au moins une fois avant l'exportation. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Pour créer un lien vers des objets externes, le document doit être enregistré au moins une fois. @@ -10345,7 +10345,7 @@ apportée à la copie en cours sera perdue. - + Unnamed Sans nom diff --git a/src/Gui/Language/FreeCAD_gl.ts b/src/Gui/Language/FreeCAD_gl.ts index 3212e7f697..cc89c86f06 100644 --- a/src/Gui/Language/FreeCAD_gl.ts +++ b/src/Gui/Language/FreeCAD_gl.ts @@ -6824,7 +6824,7 @@ Quere gardar os cambios? Gui::MainWindow - + Dimension Acoutamento @@ -6854,32 +6854,32 @@ Quere gardar os cambios? Pechar todo - + Toggles this toolbar Amosa/agocha esta barra de ferramentas - + Toggles this dockable window Alterna esta xanela acoplable - - + + Unsaved document Documento non gardado - + The exported object contains external link. Please save the documentat least once before exporting. The exported object contains external link. Please save the documentat least once before exporting. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? To link to external objects, the document must be saved at least once. @@ -10363,7 +10363,7 @@ the current copy will be lost. - + Unnamed Sen nome diff --git a/src/Gui/Language/FreeCAD_hr.ts b/src/Gui/Language/FreeCAD_hr.ts index d2370fb580..c14b2f6f3f 100644 --- a/src/Gui/Language/FreeCAD_hr.ts +++ b/src/Gui/Language/FreeCAD_hr.ts @@ -6869,7 +6869,7 @@ Do you want to save your changes? Gui::MainWindow - + Dimension Dimenzija @@ -6901,33 +6901,33 @@ Do you want to save your changes? Zatvori sve - + Toggles this toolbar Uključuje ove alatne trake - + Toggles this dockable window Uključuje ovaj usidrivi prozor - - + + Unsaved document Nespremljeni dokument - + The exported object contains external link. Please save the documentat least once before exporting. Izvezeni objekt sadrži vanjsku poveznicu. Prije izvoza spremite dokument barem jednom. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Za povezivanje s vanjskim objektima dokument se mora barem jednom spremiti. @@ -10426,7 +10426,7 @@ trenutnu kopiju će biti izgubljene. - + Unnamed Neimenovano diff --git a/src/Gui/Language/FreeCAD_hu.ts b/src/Gui/Language/FreeCAD_hu.ts index cb06b67842..9327a0128e 100644 --- a/src/Gui/Language/FreeCAD_hu.ts +++ b/src/Gui/Language/FreeCAD_hu.ts @@ -6816,7 +6816,7 @@ El akarja menteni a változásokat? Gui::MainWindow - + Dimension Dimenzió @@ -6846,32 +6846,32 @@ El akarja menteni a változásokat? Minden bezárása - + Toggles this toolbar Eszköztár megjelenítése - + Toggles this dockable window Dokkolható ablak megjelenítése - - + + Unsaved document Nem mentett dokumentum - + The exported object contains external link. Please save the documentat least once before exporting. Az exportált tárgy külső hivatkozást tartalmaz. Exportálás előtt legalább egyszer mentse a dokumentumot. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Külső tárgyakra hivatkozáshoz a dokumentumot legalább egyszer menteni kell. @@ -10355,7 +10355,7 @@ az aktuális példány elveszik. - + Unnamed Névtelen diff --git a/src/Gui/Language/FreeCAD_it.ts b/src/Gui/Language/FreeCAD_it.ts index 56637ccdc1..5ca509c8a6 100644 --- a/src/Gui/Language/FreeCAD_it.ts +++ b/src/Gui/Language/FreeCAD_it.ts @@ -4746,7 +4746,7 @@ Si può anche utilizzare il modulo: John Doe <john@doe.com> Base color for all elements - Base color for all elements + Colore di base per tutti gli elementi @@ -6818,7 +6818,7 @@ Si desidera salvare le modifiche? Gui::MainWindow - + Dimension Dimensione @@ -6848,32 +6848,32 @@ Si desidera salvare le modifiche? Chiudi tutto - + Toggles this toolbar Nascondi questa barra degli strumenti - + Toggles this dockable window Nascondi questa finestra - - + + Unsaved document Documento non salvato - + The exported object contains external link. Please save the documentat least once before exporting. L'oggetto esportato contiene un link esterno. Salvare il documento almeno una volta prima di esportarlo. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Per collegare oggetti esterni, il documento deve essere salvato almeno una volta. @@ -10357,7 +10357,7 @@ la copia corrente andranno perse. - + Unnamed Senza nome diff --git a/src/Gui/Language/FreeCAD_ja.ts b/src/Gui/Language/FreeCAD_ja.ts index bd0bc4f98a..6517bbce91 100644 --- a/src/Gui/Language/FreeCAD_ja.ts +++ b/src/Gui/Language/FreeCAD_ja.ts @@ -428,7 +428,7 @@ The object will be edited using the mode defined internally to be the most appropriate for the object type - The object will be edited using the mode defined internally to be the most appropriate for the object type + オブジェクトは、オブジェクト型に最も適した、内部的に定義されたモードを使用して編集されます。 @@ -438,7 +438,7 @@ The object will have its placement editable with the Std TransformManip command - The object will have its placement editable with the Std TransformManip command + オブジェクトの配置は Std TransformManip コマンドで編集可能です。 @@ -448,7 +448,7 @@ This edit mode is implemented as available but currently does not seem to be used by any object - This edit mode is implemented as available but currently does not seem to be used by any object + この編集モードは利用可能な状態で実装されていますが、現在はどのオブジェクトでも使用されていないようです。 @@ -458,7 +458,7 @@ The object will have the color of its individual faces editable with the Part FaceColors command - The object will have the color of its individual faces editable with the Part FaceColors command + オブジェクトはそれぞれの面の色を持ち、Part FaceColors コマンドで編集可能です。 @@ -1272,7 +1272,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces To change a current shortcut enter the new shortcut in the field below and press 'Assign'. - To change a current shortcut enter the new shortcut in the field below and press 'Assign'. + 現在のショートカットを変更するには、下のフィールドに新しいショートカットを入力し、「割り当て」を押します。 @@ -1282,30 +1282,28 @@ If this is not ticked, then the property must be uniquely named, and it is acces Multi-key sequence delay: - Multi-key sequence delay: + マルチキーシーケンスの遅延: Time in milliseconds to wait for the next key stroke of the current key sequence. For example, pressing 'F' twice in less than the time delay setting here will be be treated as shorctcut key sequence 'F, F'. - Time in milliseconds to wait for the next key stroke of the current key sequence. -For example, pressing 'F' twice in less than the time delay setting here will be -be treated as shorctcut key sequence 'F, F'. + 現在のキーシーケンスの次のキーストロークを待つ時間 (ミリ秒単位)。 +例えば、ここでの時間遅延設定よりも短く「F」を2回押すと、 +ショートカットキーシーケンス「F, F」として扱われます。 This list shows commands having the same shortcut in the priority from high to low. If more than one command with the same shortcut are active at the same time. The one with the highest priority will be triggered. - This list shows commands having the same shortcut in the priority from high -to low. If more than one command with the same shortcut are active at the -same time. The one with the highest priority will be triggered. + このリストでは、同じショートカットを持つコマンドを優先順位の高低順で表示しています。同じショートカットを持つ複数のコマンドが同時にアクティブになっている場合、優先順位が最も高いものが実行されます。 Shortcut priority list: - Shortcut priority list: + ショートカット優先度リスト: @@ -1485,7 +1483,7 @@ same time. The one with the highest priority will be triggered. <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> - <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">Note:</span> The changes become active the next time you load the appropriate workbench</p></body></html> + <html><head><meta name="qrichtext" content="1" /></head><body style=" white-space: pre-wrap; font-size:7.8pt; font-weight:400; font-style:normal; text-decoration:none;"><p style=" margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-size:8pt;"><span style=" font-weight:600;">注意:</span> 変更は次回、対応するワークベンチをロードした際に有効になります</p></body></html> @@ -1960,10 +1958,7 @@ same time. The one with the highest priority will be triggered. will be substituted with locale separator, except in Python Console and Macro Editor where a dot/period will always be printed. - If enabled, numerical keypad decimal separator -will be substituted with locale separator, except -in Python Console and Macro Editor where a -dot/period will always be printed. + 有効にすると、数値キーパッドの小数点以下の区切り文字はロケールの区切り文字で置き換えられます。ただし Python コンソールとマクロ・エディタでは ドット/ピリオドが常に表示されます。 @@ -2124,8 +2119,8 @@ this according to your screen size or personal taste Background of the main window (when no document is opened) will consist of tiles of a special image. See the FreeCAD Wiki for details about the image. - Background of the main window (when no document is opened) will consist of tiles of a special image. -See the FreeCAD Wiki for details about the image. + (ドキュメントが開かれていないときの) メインウィンドウの背景を特別な画像のタイルで構成。 +画像の詳細については FreeCAD ウィキを参照。 @@ -2892,12 +2887,12 @@ Specify another directory, please. Restart now - Restart now + 今すぐ再起動 Restart later - Restart later + 後で再起動 @@ -3459,16 +3454,10 @@ can be rendered directly by GPU. Note: Sometimes this feature may lead to a host of different issues ranging from graphical anomalies to GPU crash bugs. Remember to report this setting as enabled when seeking support on the FreeCAD forums - If selected, Vertex Buffer Objects (VBO) will be used. -A VBO is an OpenGL feature that provides methods for uploading -vertex data (position, normal vector, color, etc.) to the graphics card. -VBOs offer substantial performance gains because the data resides -in the graphics memory rather than the system memory and so it -can be rendered directly by GPU. + 選択した場合、頂点バッファオブジェクト (VBO) が使用されます。 +VBOはOpenGLの機能で、頂点データ (位置、法線ベクトル、色など) をグラフィックカードへアップロードするためのメソッドを提供します。データがシステムメモリーではなくグラフィックメモリーに配置され、GPUで直接レンダリングされるようになるので、VBO によってかなりのパフォーマンス改善を実現できます。 -Note: Sometimes this feature may lead to a host of different -issues ranging from graphical anomalies to GPU crash bugs. Remember to -report this setting as enabled when seeking support on the FreeCAD forums +注意: この機能を使用すると描画の異常やGPUをクラッシュさせる不具合といった様々な問題が起きる場合があります。FreeCADフォーラムでサポートを受ける場合はこの設定を有効にしていることを忘れずに報告してください。 @@ -3479,13 +3468,11 @@ There are 3 options available to achieve this: 3) 'Centralized', manually turn off cache in all nodes of all view provider, and only cache at the scene graph root node. This offers the fastest rendering speed but slower response to any scene changes. - 'Render Caching' is another way to say 'Rendering Acceleration'. -There are 3 options available to achieve this: -1) 'Auto' (default), let Coin3D decide where to cache. -2) 'Distributed', manually turn on cache for all view provider root node. -3) 'Centralized', manually turn off cache in all nodes of all view provider, and -only cache at the scene graph root node. This offers the fastest rendering speed -but slower response to any scene changes. + 「レンダリングのキャッシュ」は「レンダリング・アクセラレーション」の別名です。 +これを行うためには3つの選択肢があります: +1) '自動' (デフォルト) どこでキャッシュを行うかをCoin3Dに決めさせます。 +2) '分散' 全てのビュープロバイダーのルートノードでのキャッシュを手動で無効にします。 +3) '集中' 全てのビュープロバイダーの全てのノードでのキャッシュを手動で無効にし、シーングラフのルートノードでのみキャッシュさせます。この設定を使うとレンダリング速度は最速になりますが、シーン変更での応答は遅くなります。 @@ -3704,12 +3691,12 @@ bounding box size of the 3D object that is currently displayed. Daily - Daily + 日次 Weekly - Weekly + 週次 @@ -4082,7 +4069,7 @@ get date suffix according to the specified format Allow objects to have same label - Allow objects to have same label + オブジェクトが同じラベルを持つことを許可 @@ -4202,17 +4189,17 @@ John Doe <john@doe.com> 形式を使用することもできます。 CERN Open Hardware Licence strongly-reciprocal - CERN Open Hardware Licence strongly-reciprocal + CERN オープンハードウェアライセンス 強互恵 CERN Open Hardware Licence weakly-reciprocal - CERN Open Hardware Licence weakly-reciprocal + CERN オープンハードウェアライセンス 弱互恵 CERN Open Hardware Licence permissive - CERN Open Hardware Licence permissive + CERN オープンハードウェアライセンス 許容 @@ -5000,9 +4987,8 @@ horizontal space in Python console Area for picking elements in 3D view. Larger value eases to pick things, but can make small features impossible to select. - Area for picking elements in 3D view. -Larger value eases to pick things, but can make small features impossible to select. - + 3D ビューでの要素ピック範囲。 +大きな値を設定するとピックが容易になりますが、小さなフィーチャーを選択できなくなります。 @@ -5092,24 +5078,24 @@ Larger value eases to pick things, but can make small features impossible to sel Linear gradient - Linear gradient + 線状グラデーション Radial gradient - Radial gradient + 放射状グラデーション Top: - Top: + 上: Middle: - Middle: + 中間: @@ -5135,7 +5121,7 @@ Larger value eases to pick things, but can make small features impossible to sel Bottom: - Bottom: + 下: @@ -5165,17 +5151,17 @@ Larger value eases to pick things, but can make small features impossible to sel Central: - Central: + 中央: Midway: - Midway: + 中間: End: - End: + 終端: @@ -5598,7 +5584,7 @@ The 'Status' column shows whether the document could be recovered. Panning: - Panning: + パン: @@ -6084,7 +6070,7 @@ The 'Status' column shows whether the document could be recovered. Show dependencies - Show dependencies + 依存関係の表示 @@ -6216,12 +6202,12 @@ originally selected prior to opening this dialog Critical messages - Critical messages + 重要なメッセージ Show Report view on - Show Report view on + レポートビューの表示 @@ -6797,7 +6783,7 @@ Do you want to save your changes? Gui::MainWindow - + Dimension 寸法 @@ -6827,32 +6813,32 @@ Do you want to save your changes? すべて閉じる - + Toggles this toolbar このツールバーを切り替えます - + Toggles this dockable window このドッキング可能なウィンドウを切り替える - - + + Unsaved document 未保存のドキュメント - + The exported object contains external link. Please save the documentat least once before exporting. エクスポートされたオブジェクトには外部リンクがふくまれています。エクスポートの前に少なくとも一度ドキュメントを保存してください。 - + To link to external objects, the document must be saved at least once. Do you want to save the document now? 外部オブジェクトにリンクするにはドキュメントを少なくとも一度保存する必要があります。 @@ -6943,7 +6929,7 @@ How do you want to proceed? Point_%1 - Point_%1 + Point_%1 @@ -6968,7 +6954,7 @@ How do you want to proceed? &Remove last point - &Remove last point + 最後の点を削除(&R) @@ -6978,7 +6964,7 @@ How do you want to proceed? &Synchronize views - &Synchronize views + ビューを同期(&S) @@ -7778,7 +7764,7 @@ Do you want to specify another directory? Belarusian - Belarusian + ベラルーシ語 @@ -7923,7 +7909,7 @@ Do you want to specify another directory? Serbian, Latin - Serbian, Latin + セルビア語 (ラテン文字) @@ -8022,12 +8008,12 @@ Do you want to specify another directory? Show description column - Show description column + 説明列を表示 Show an extra tree view column for item description. The item's description can be set by pressing F2 (or your OS's edit button) or by editing the 'label2' property. - Show an extra tree view column for item description. The item's description can be set by pressing F2 (or your OS's edit button) or by editing the 'label2' property. + アイテム説明のための追加のツリービュー列を表示します。 項目の説明は、F2 (または使用している OS の編集ボタン) を押すか、「label2」プロパティを編集することで設定できます。 @@ -8047,22 +8033,22 @@ Do you want to specify another directory? Show items hidden in tree view - Show items hidden in tree view + ツリービューの非表示アイテムを表示 Show items that are marked as 'hidden' in the tree view - Show items that are marked as 'hidden' in the tree view + ツリービューで「非表示」としてマークされているアイテムを表示 Toggle visibility in tree view - Toggle visibility in tree view + ツリー ビューでの表示を切り替え Toggles the visibility of selected items in the tree view - Toggles the visibility of selected items in the tree view + ツリー ビューで選択したアイテムの表示を切り替えます。 @@ -8456,7 +8442,7 @@ Do you want to specify another directory? Python - Python + Python @@ -8832,7 +8818,7 @@ Do you want to continue? Do you want to skip confirmation of further critical message notifications while loading the file? - Do you want to skip confirmation of further critical message notifications while loading the file? + ファイルの読み込み中により重要なメッセージの通知確認をスキップしますか？ @@ -10326,7 +10312,7 @@ the current copy will be lost. - + Unnamed Unnamed diff --git a/src/Gui/Language/FreeCAD_ka.ts b/src/Gui/Language/FreeCAD_ka.ts index bfb3a54316..4450cbb674 100644 --- a/src/Gui/Language/FreeCAD_ka.ts +++ b/src/Gui/Language/FreeCAD_ka.ts @@ -6810,7 +6810,7 @@ Do you want to save your changes? Gui::MainWindow - + Dimension ზომა @@ -6840,32 +6840,32 @@ Do you want to save your changes? ყველას დახურვა - + Toggles this toolbar ამ ზოლის ჩართ/გამორთ - + Toggles this dockable window მიმაგრებადი ფანჯრის ჩვენების ჩართ/გამორთ - - + + Unsaved document შეუნახავი დოკუმენტი - + The exported object contains external link. Please save the documentat least once before exporting. გატანილი ობიექტი შეიცავს გარე ბმულს. გთხოვთ გატანამდე დოკუმენტი ერთხელ მაინც შეინახოთ. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? გარე ობიექტებთან დასაკავშირებლად, დოკუმენტი უნდა იყოს შენახული ერთხელ მაინც. @@ -10349,7 +10349,7 @@ the current copy will be lost. - + Unnamed უსახელო diff --git a/src/Gui/Language/FreeCAD_ko.ts b/src/Gui/Language/FreeCAD_ko.ts index 9c690937ea..275f4ea484 100644 --- a/src/Gui/Language/FreeCAD_ko.ts +++ b/src/Gui/Language/FreeCAD_ko.ts @@ -6813,7 +6813,7 @@ Do you want to save your changes? Gui::MainWindow - + Dimension 치수 @@ -6843,32 +6843,32 @@ Do you want to save your changes? 모두 닫기 - + Toggles this toolbar 이 도구 모음 전환하기 - + Toggles this dockable window 이 도킹 가능 창 전환하기 - - + + Unsaved document 저장하지 않은 문서 - + The exported object contains external link. Please save the documentat least once before exporting. 내보낸 객체에 외부 링크가 포함되어 있습니다. 내보내기 전에 문서를 한 번 이상 저장하십시오. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? 외부 객체에 링크하려면, 문서를 한 번 이상 저장해야 합니다. @@ -10347,7 +10347,7 @@ the current copy will be lost. - + Unnamed 이름없음 diff --git a/src/Gui/Language/FreeCAD_nl.ts b/src/Gui/Language/FreeCAD_nl.ts index 0a4266ed63..9bc99385d0 100644 --- a/src/Gui/Language/FreeCAD_nl.ts +++ b/src/Gui/Language/FreeCAD_nl.ts @@ -2895,12 +2895,12 @@ Kies een andere map, alstublieft. Restart now - Restart now + Nu opnieuw opstarten Restart later - Restart later + Later opnieuw opstarten @@ -6817,7 +6817,7 @@ Wilt u uw wijzigingen opslaan? Gui::MainWindow - + Dimension Afmeting @@ -6847,32 +6847,32 @@ Wilt u uw wijzigingen opslaan? Alles sluiten - + Toggles this toolbar Schakelt deze werkbalk in/uit - + Toggles this dockable window Schakelt dit dokbare venster in/uit - - + + Unsaved document Niet-opgeslagen document - + The exported object contains external link. Please save the documentat least once before exporting. Het geëxporteerde object bevat een externe link. Sla het document minstens één keer op voordat u het exporteert. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Om een link naar externe objecten te kunnen maken, moet het document minstens één keer worden opgeslagen. @@ -10351,7 +10351,7 @@ the current copy will be lost. - + Unnamed Naamloos diff --git a/src/Gui/Language/FreeCAD_pl.ts b/src/Gui/Language/FreeCAD_pl.ts index ed416b1413..e82d487145 100644 --- a/src/Gui/Language/FreeCAD_pl.ts +++ b/src/Gui/Language/FreeCAD_pl.ts @@ -106,7 +106,7 @@ Toggle measurement - Przełącz widoczność wymiarów + Włącz / wyłącz widoczność pomiarów @@ -306,7 +306,7 @@ Measure - Wymiarowanie + Pomiary @@ -2339,7 +2339,7 @@ wyświetli ekran powitalny Macros - Makrodefinicje + Makropolecenie @@ -4532,7 +4532,7 @@ Możesz również skorzystać z formatki: John Doe <john@doe.com> Macro - Makrodefinicje + Makropolecenia @@ -6133,7 +6133,7 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. Selections - Zaznaczenia + Wybór: @@ -6802,7 +6802,7 @@ Do you want to save your changes? Macros - Makropolecenie + Makrodefinicje @@ -6819,7 +6819,7 @@ Do you want to save your changes? Gui::MainWindow - + Dimension Wymiar @@ -6849,32 +6849,32 @@ Do you want to save your changes? Zamknij wszystkie - + Toggles this toolbar Włącza/wyłącza ten pasek narzędzi - + Toggles this dockable window Włącza/wyłącza to okno dokujące - - + + Unsaved document Niezapisany dokument - + The exported object contains external link. Please save the documentat least once before exporting. Wyeksportowany obiekt zawiera zewnętrzny odnośnik. Proszę zapisać dokument przynajmniej raz przed wyeksportowaniem. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Aby powiązać z obiektami zewnętrznymi, dokument musi być zapisany co najmniej raz. @@ -7470,7 +7470,7 @@ Do you want to exit without saving your data? Open %1 as - Otwórz %1 jako + Otwórz %1 za pomocą: @@ -9453,13 +9453,13 @@ bieżącej kopii zostaną utracone. Box selection - Zaznacz obszar + Zaznacz obszarem Activate the box selection tool - Aktywuj narzędzie zaznaczania obszaru + Aktywuje narzędzie zaznaczania obszaru @@ -10303,7 +10303,7 @@ bieżącej kopii zostaną utracone. Measure distance - Wymiarowanie odległości + Pomiar odległości @@ -10353,7 +10353,7 @@ bieżącej kopii zostaną utracone. - + Unnamed Nienazwany @@ -11590,7 +11590,7 @@ bieżącej kopii zostaną utracone. Fullscreen - Cały ekran + Pełny ekran @@ -11828,7 +11828,7 @@ bieżącej kopii zostaną utracone. Display the active view either in fullscreen, in undocked or docked mode - Wyświetl aktywny widok na pełnym ekranie, w trybie niezadokowanym lub zadokowanym + Wyświetl aktywny widok w trybie pełnoekranowym, w trybie niezadokowanym lub zadokowanym @@ -11836,7 +11836,7 @@ bieżącej kopii zostaną utracone. Fullscreen - Pełny ekran + Cały ekran @@ -11870,7 +11870,7 @@ bieżącej kopii zostaną utracone. Display the active view either in fullscreen, in undocked or docked mode - Wyświetl aktywny widok w trybie pełnoekranowym, w trybie niezadokowanym lub zadokowanym + Wyświetl aktywny widok na pełnym ekranie, w trybie niezadokowanym lub zadokowanym @@ -12189,7 +12189,7 @@ Czy nadal chcesz kontynuować? Macro - Makropolecenia + Makrodefinicje diff --git a/src/Gui/Language/FreeCAD_pt-BR.ts b/src/Gui/Language/FreeCAD_pt-BR.ts index 244b8b7192..e366135277 100644 --- a/src/Gui/Language/FreeCAD_pt-BR.ts +++ b/src/Gui/Language/FreeCAD_pt-BR.ts @@ -6811,7 +6811,7 @@ Deseja salvar as alterações? Gui::MainWindow - + Dimension Dimensão @@ -6841,32 +6841,32 @@ Deseja salvar as alterações? Fechar tudo - + Toggles this toolbar Alterna esta barra de ferramentas - + Toggles this dockable window Alterna esta janela acoplável - - + + Unsaved document Documento não salvo - + The exported object contains external link. Please save the documentat least once before exporting. O objeto exportado contém links externos. Salve o documento pelo menos uma vez antes de exportar. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Para vincular a objetos externos, o documento deve ser salvo pelo menos uma vez. @@ -10341,7 +10341,7 @@ cópia atual será perdida. - + Unnamed Sem nome diff --git a/src/Gui/Language/FreeCAD_pt-PT.ts b/src/Gui/Language/FreeCAD_pt-PT.ts index be55734771..1232b9a2fa 100644 --- a/src/Gui/Language/FreeCAD_pt-PT.ts +++ b/src/Gui/Language/FreeCAD_pt-PT.ts @@ -405,7 +405,7 @@ Form - Formulário + De @@ -6817,7 +6817,7 @@ Deseja guardar as suas alterações? Gui::MainWindow - + Dimension Dimensão @@ -6847,32 +6847,32 @@ Deseja guardar as suas alterações? Fechar Tudo - + Toggles this toolbar Altera esta Barra de Ferramentas - + Toggles this dockable window Ativa/desativa esta janela encaixável - - + + Unsaved document Documento não guardado - + The exported object contains external link. Please save the documentat least once before exporting. The exported object contains external link. Please save the documentat least once before exporting. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? To link to external objects, the document must be saved at least once. @@ -10352,7 +10352,7 @@ the current copy will be lost. - + Unnamed Sem nome diff --git a/src/Gui/Language/FreeCAD_ro.ts b/src/Gui/Language/FreeCAD_ro.ts index 26261e23e6..999a8bafe6 100644 --- a/src/Gui/Language/FreeCAD_ro.ts +++ b/src/Gui/Language/FreeCAD_ro.ts @@ -6817,7 +6817,7 @@ Doriți să salvați modificările? Gui::MainWindow - + Dimension Dimensiune @@ -6847,32 +6847,32 @@ Doriți să salvați modificările? Inchide toate - + Toggles this toolbar Activează/dezactivează această bară de instrumente - + Toggles this dockable window Activează/dezactivează această fereastră fixabilă - - + + Unsaved document Document nesalvat - + The exported object contains external link. Please save the documentat least once before exporting. Obiectul exportat conține o legătură externă. Vă rugăm să salvați documentul cel puțin o dată înainte de al exporta. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Pentru face legăturile la obiecte externe, documentul trebuie salvat cel puțin o dată. @@ -10352,7 +10352,7 @@ copia curentă va fi pierdută. - + Unnamed Nedenumit diff --git a/src/Gui/Language/FreeCAD_ru.ts b/src/Gui/Language/FreeCAD_ru.ts index 3bd0730fe8..e2deee5840 100644 --- a/src/Gui/Language/FreeCAD_ru.ts +++ b/src/Gui/Language/FreeCAD_ru.ts @@ -6810,7 +6810,7 @@ Do you want to save your changes? Gui::MainWindow - + Dimension Размер @@ -6840,32 +6840,32 @@ Do you want to save your changes? Закрыть все - + Toggles this toolbar Переключение этой панели инструментов - + Toggles this dockable window Спрятать/показать это встраиваемое окно - - + + Unsaved document Документ не сохранён - + The exported object contains external link. Please save the documentat least once before exporting. Экспортированный объект содержит внешнюю ссылку. Пожалуйста, сохраните документ хотя бы один раз перед экспортом. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Для ссылки на внешние объекты документ необходимо сохранить хотя бы один раз. @@ -10344,7 +10344,7 @@ the current copy will be lost. - + Unnamed Безымянный diff --git a/src/Gui/Language/FreeCAD_sl.ts b/src/Gui/Language/FreeCAD_sl.ts index 834cb6f5f7..1b0037dd70 100644 --- a/src/Gui/Language/FreeCAD_sl.ts +++ b/src/Gui/Language/FreeCAD_sl.ts @@ -6822,7 +6822,7 @@ Ali želite shraniti spremembe? Gui::MainWindow - + Dimension Mera @@ -6852,32 +6852,32 @@ Ali želite shraniti spremembe? Zapri vse - + Toggles this toolbar Preklopi to orodno vrstico - + Toggles this dockable window Preklopi to usidrivo okno - - + + Unsaved document Neshranjen dokument - + The exported object contains external link. Please save the documentat least once before exporting. Izvoženi predmet vsebuje zunanje povezave. Pred izvažanjem shranite dokument vsaj enkrat. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Za povezovanje na zunanje predmete mora biti dokument shranjen vsaj enkrat. @@ -10362,7 +10362,7 @@ bodo izgubljene. - + Unnamed Neimenovan diff --git a/src/Gui/Language/FreeCAD_sr-CS.ts b/src/Gui/Language/FreeCAD_sr-CS.ts index 209fa36b86..52ca1daa57 100644 --- a/src/Gui/Language/FreeCAD_sr-CS.ts +++ b/src/Gui/Language/FreeCAD_sr-CS.ts @@ -6818,7 +6818,7 @@ Da li želiš da sačuvaš promene? Gui::MainWindow - + Dimension Kota @@ -6848,32 +6848,32 @@ Da li želiš da sačuvaš promene? Zatvori sve - + Toggles this toolbar Uključuje/isključuje ovu paletu alata - + Toggles this dockable window Toggles this dockable window - - + + Unsaved document Nesačuvan dokument - + The exported object contains external link. Please save the documentat least once before exporting. Izvezeni objekat sadrži spoljnu vezu. Sačuvaj dokument bar jednom pre nego što ga izvezeš. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Da bi se povezali sa spoljnim objektima, dokument mora biti sačuvan najmanje jednom. @@ -9808,7 +9808,7 @@ the current copy will be lost. Toggle &Edit mode - Toggle &Edit mode + Uključi/isključi režim uređivanja @@ -10358,7 +10358,7 @@ the current copy will be lost. - + Unnamed Bez imena diff --git a/src/Gui/Language/FreeCAD_sr.ts b/src/Gui/Language/FreeCAD_sr.ts index 811b550df3..840ec3120b 100644 --- a/src/Gui/Language/FreeCAD_sr.ts +++ b/src/Gui/Language/FreeCAD_sr.ts @@ -6818,7 +6818,7 @@ Do you want to save your changes? Gui::MainWindow - + Dimension Кота @@ -6848,32 +6848,32 @@ Do you want to save your changes? Затвори све - + Toggles this toolbar Укључује/иcкључује ову палету алатки - + Toggles this dockable window Toggles this dockable window - - + + Unsaved document Несачуван документ - + The exported object contains external link. Please save the documentat least once before exporting. Извезени објекат садржи спољну везу. Сачувај документ бар једном пре него што га извезеш. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Да би се повезао са спољним објектима, документ мора бити сачуван најмање једном. @@ -9808,7 +9808,7 @@ the current copy will be lost. Toggle &Edit mode - Toggle &Edit mode + Укључи/искључи режим уређивања @@ -10358,7 +10358,7 @@ the current copy will be lost. - + Unnamed Без имена diff --git a/src/Gui/Language/FreeCAD_sv-SE.ts b/src/Gui/Language/FreeCAD_sv-SE.ts index bbb94a61d8..374d2f512d 100644 --- a/src/Gui/Language/FreeCAD_sv-SE.ts +++ b/src/Gui/Language/FreeCAD_sv-SE.ts @@ -6820,7 +6820,7 @@ Vill du spara ändringarna? Gui::MainWindow - + Dimension Dimension @@ -6850,32 +6850,32 @@ Vill du spara ändringarna? Stäng alla - + Toggles this toolbar Växlar denna verktygsrad - + Toggles this dockable window Växlar detta dockningsbara fönster - - + + Unsaved document Osparat dokument - + The exported object contains external link. Please save the documentat least once before exporting. Det exporterade objektet innehåller extern länk. Spara dokumentet minst en gång innan du exporterar. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? För att länka till externa objekt måste dokumentet sparas minst en gång. @@ -10360,7 +10360,7 @@ the current copy will be lost. - + Unnamed Namnlös diff --git a/src/Gui/Language/FreeCAD_tr.ts b/src/Gui/Language/FreeCAD_tr.ts index 02a6144325..d364d5817c 100644 --- a/src/Gui/Language/FreeCAD_tr.ts +++ b/src/Gui/Language/FreeCAD_tr.ts @@ -6818,7 +6818,7 @@ Do you want to save your changes? Gui::MainWindow - + Dimension Boyut @@ -6848,32 +6848,32 @@ Do you want to save your changes? Tümünü Kapat - + Toggles this toolbar Bu araç çubuğunu değiştirir - + Toggles this dockable window Bu yapışabilir pencere arasında geçiş yapar - - + + Unsaved document Kaydedilmemiş belge - + The exported object contains external link. Please save the documentat least once before exporting. Dışa aktarılan nesne dış bağlantı içeriyor. Lüften dışa aktarmadan önce belgeyi en az bir defa kaydedin. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Harici nesneleri bağlamak için belge, en az bir defa kaydedilmelidir. Belgeyi şimdi kaydetmek istiyor musunuz? @@ -10352,7 +10352,7 @@ the current copy will be lost. - + Unnamed Adsız diff --git a/src/Gui/Language/FreeCAD_uk.ts b/src/Gui/Language/FreeCAD_uk.ts index 6c2a577084..942b29445d 100644 --- a/src/Gui/Language/FreeCAD_uk.ts +++ b/src/Gui/Language/FreeCAD_uk.ts @@ -2884,7 +2884,7 @@ Specify another directory, please. Restart required - Restart required + Потрібен перезапуск @@ -6817,7 +6817,7 @@ Do you want to save your changes? Gui::MainWindow - + Dimension Розмірність @@ -6847,32 +6847,32 @@ Do you want to save your changes? Закрити все - + Toggles this toolbar Переключення цієї панелі - + Toggles this dockable window Переключення цього закріплюваного вікна - - + + Unsaved document Незбережений документ - + The exported object contains external link. Please save the documentat least once before exporting. Експортований обʼєкт містить зовнішні посилання. Збережіть документ хоча б раз перед експортом. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Щоб привʼязати зовнішні обʼєкти, документ повинен бути збережений хоча б один раз. @@ -10355,7 +10355,7 @@ the current copy will be lost. - + Unnamed Без назви diff --git a/src/Gui/Language/FreeCAD_val-ES.ts b/src/Gui/Language/FreeCAD_val-ES.ts index 234b9487a8..2b32cd3101 100644 --- a/src/Gui/Language/FreeCAD_val-ES.ts +++ b/src/Gui/Language/FreeCAD_val-ES.ts @@ -6811,7 +6811,7 @@ Do you want to save your changes? Gui::MainWindow - + Dimension Dimensió @@ -6841,32 +6841,32 @@ Do you want to save your changes? Tanca-ho tot - + Toggles this toolbar Commuta la barra d'eines - + Toggles this dockable window Commuta la finestra flotant - - + + Unsaved document El document no s'ha guardat. - + The exported object contains external link. Please save the documentat least once before exporting. L’objecte exportat conté un enllaç extern. Guardeu el documenta almenys una vegada abans d’exportar-lo. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? Per a enllaçar amb objectes externs, el document s’ha de guardar almenys una vegada. @@ -10338,7 +10338,7 @@ the current copy will be lost. - + Unnamed Sense nom diff --git a/src/Gui/Language/FreeCAD_zh-CN.ts b/src/Gui/Language/FreeCAD_zh-CN.ts index fb6b2cb2ff..311c671287 100644 --- a/src/Gui/Language/FreeCAD_zh-CN.ts +++ b/src/Gui/Language/FreeCAD_zh-CN.ts @@ -2113,7 +2113,7 @@ this according to your screen size or personal taste Size of recent file list: - Size of recent file list: + 最近文件列表的大小： @@ -3501,7 +3501,7 @@ but slower response to any scene changes. What kind of multisample anti-aliasing is used - What kind of multisample anti-aliasing is used + 使用什么多重采样抗锯齿模式 @@ -4539,7 +4539,7 @@ You can also use the form: John Doe <john@doe.com> The directory in which the application will search for macros - The directory in which the application will search for macros + 应用程序搜索宏的目录 @@ -4648,7 +4648,7 @@ You can also use the form: John Doe <john@doe.com> Number of steps by turn when using arrows (default = 8 : step angle = 360/8 = 45 deg) - Number of steps by turn when using arrows (default = 8 : step angle = 360/8 = 45 deg) + 使用箭头时的转向值 (默认 = 8 : 角度= 360/8 = 45 度) @@ -4698,7 +4698,7 @@ You can also use the form: John Doe <john@doe.com> Font name of the navigation cube - Font name of the navigation cube + 导航立方体字体名称 @@ -4723,7 +4723,7 @@ You can also use the form: John Doe <john@doe.com> Base color for all elements - Base color for all elements + 所有元素的基本颜色 @@ -4734,8 +4734,8 @@ You can also use the form: John Doe <john@doe.com> List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. - List the mouse button configs for each chosen navigation setting. -Select a set and then press the button to view said configurations. + 列出每个所选导航设置的鼠标按钮配置。 +选择一组然后按下按钮查看所述配置。 @@ -4745,7 +4745,7 @@ Select a set and then press the button to view said configurations. Navigation settings set - Navigation settings set + 导航栏设置 @@ -4758,10 +4758,10 @@ Select a set and then press the button to view said configurations. - Rotation orbit style. -Trackball: moving the mouse horizontally will rotate the part around the y-axis -Turntable: the part will be rotated around the z-axis (with constrained axes). -Free Turntable: the part will be rotated around the z-axis. + 旋转轨迹样式。 +轨迹球：水平移动鼠标将会使部件绕y轴旋转 +转盘：部件将会绕z轴（带约束轴）旋转。 +自由转盘：部件将绕z轴旋转。 @@ -4776,7 +4776,7 @@ Free Turntable: the part will be rotated around the z-axis. Free Turntable - Free Turntable + 自由转盘 @@ -6793,7 +6793,7 @@ Do you want to save your changes? Gui::MainWindow - + Dimension 尺寸标注 @@ -6823,32 +6823,32 @@ Do you want to save your changes? 全部关闭 - + Toggles this toolbar 切换此工具栏 - + Toggles this dockable window 切换此可停靠的窗口 - - + + Unsaved document 未保存的文件 - + The exported object contains external link. Please save the documentat least once before exporting. The exported object contains external link. Please save the documentat least once before exporting. - + To link to external objects, the document must be saved at least once. Do you want to save the document now? To link to external objects, the document must be saved at least once. @@ -10324,7 +10324,7 @@ the current copy will be lost. - + Unnamed 未命名 diff --git a/src/Gui/Language/FreeCAD_zh-TW.ts b/src/Gui/Language/FreeCAD_zh-TW.ts index d9a004a8b4..5fec25c956 100644 --- a/src/Gui/Language/FreeCAD_zh-TW.ts +++ b/src/Gui/Language/FreeCAD_zh-TW.ts @@ -6804,7 +6804,7 @@ Do you want to save your changes? Gui::MainWindow - + Dimension 標註 @@ -6834,32 +6834,32 @@ Do you want to save your changes? 全部關閉 - + Toggles this toolbar 切換此工具列 - + Toggles this dockable window 切換此可停靠的視窗 - - + + Unsaved document 未儲存文件 - + The exported object contains external link. Please save the documentat least once before exporting. 匯出的物件包含外部連結。請在匯出前至少儲存一次文件。 - + To link to external objects, the document must be saved at least once. Do you want to save the document now? 要連結到外部物體，文件必須至少儲存一次. @@ -10324,7 +10324,7 @@ the current copy will be lost. - + Unnamed 未命名 diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm index b984424adc..7b028a04ec 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_de.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts index 15cb5c5822..3b3d743620 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts @@ -1750,7 +1750,7 @@ installed addons will be checked for available updates Failed to automatically locate your Python executable, or the path is set incorrectly. Please check the Addon Manager preferences setting for the path to Python. - Failed to automatically locate your Python executable, or the path is set incorrectly. Please check the Addon Manager preferences setting for the path to Python. + Konnte die ausführbare Python-Datei nicht automatisch lokalisieren, oder der Pfad ist falsch gesetzt. Bitte den Pfad zu Python in den Einstellungen des Addon-Managers überprüfen. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.qm index 80784e2a37..3babbd4a0b 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts index 253b65cc57..2f6d46e51b 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_es-AR.ts @@ -833,7 +833,7 @@ los complementos instalados serán revisados por actualizaciones disponibles Workbench - Entorno de trabajo + Banco de trabajo @@ -1646,7 +1646,7 @@ los complementos instalados serán revisados por actualizaciones disponibles Workbench - Entorno de trabajo + Banco de trabajo @@ -2047,7 +2047,7 @@ los complementos instalados serán revisados por actualizaciones disponibles Workbenches - Entornos de trabajo + Bancos de trabajo diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.qm index 6fe8dd478c..6d42b90487 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts index 0583c4c6e3..a13d44f1f3 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts @@ -37,7 +37,7 @@ <b>Package Name</b> - <b>Package Name</b> + <b>パッケージ名</b> @@ -54,7 +54,7 @@ Update Available - Update Available + 利用可能なアップデートがあります @@ -67,12 +67,12 @@ Dependencies - Dependencies + 依存関係 Dependency type - Dependency type + 依存関係の種類 @@ -82,7 +82,7 @@ Optional? - Optional? + オプション? @@ -91,16 +91,16 @@ Resolve Dependencies - Resolve Dependencies + 依存関係を解決 This Addon has the following required and optional dependencies. You must install them before this Addon can be used. Do you want the Addon Manager to install them automatically? Choose "Ignore" to install the Addon without installing the dependencies. - This Addon has the following required and optional dependencies. You must install them before this Addon can be used. + このアドオンには以下の必須依存関係、オプション依存関係があります。このアドオンを使用できるようにするにはこれらをインストールする必要があります。 -Do you want the Addon Manager to install them automatically? Choose "Ignore" to install the Addon without installing the dependencies. +アドオン・マネージャーに自動的にインストールしますか？　依存関係をインストールせずにアドオンをインストールするには"無視" を選択してください。 @@ -144,13 +144,13 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Primary branch - Primary branch + プライマリーブランチ Explanation of what this Addon provides. Displayed in the Addon Manager. It is not necessary for this to state that this is a FreeCAD Addon. - Explanation of what this Addon provides. Displayed in the Addon Manager. It is not necessary for this to state that this is a FreeCAD Addon. + このアドオンが提供するものの説明です。アドオンマネージャーに表示されます。FreeCADアドオン であることを示す必要ありません。 @@ -175,12 +175,12 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Semantic (1.2.3-beta) or CalVer (2022.08.30) styles supported - Semantic (1.2.3-beta) or CalVer (2022.08.30) styles supported + セマンティック・スタイル (1.2.3-beta) 、CalVer スタイル (20202.08.30) をサポート Set to today (CalVer style) - Set to today (CalVer style) + 今日に設定 (CalVer スタイル) @@ -194,7 +194,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Displayed in the Addon Manager's list of Addons. Should not include the word "FreeCAD", and must be a valid directory name on all support operating systems. - Displayed in the Addon Manager's list of Addons. Should not include the word "FreeCAD", and must be a valid directory name on all support operating systems. + アドオン・マネージャーのアドオンリストに表示されます。「FreeCAD」という単語を含まない、サポートされているすべてのオペレーティングシステムで利用可能なディレクトリ名でなければなりません。 @@ -239,12 +239,12 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Minimum Python - Minimum Python + Python 最低要件 (Optional, only 3.x version supported) - (Optional, only 3.x version supported) + (オプション、3.x バージョンのみサポート) @@ -254,7 +254,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon Contents - Addon Contents + アドオンの内容 @@ -272,7 +272,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Stop the cache update - Stop the cache update + キャッシュの更新を停止 @@ -302,7 +302,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Python dependencies... - Python dependencies... + Python の依存関係... @@ -322,17 +322,17 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Edit Tags - Edit Tags + タグを編集 Comma-separated list of tags describing this item: - Comma-separated list of tags describing this item: + カンマで区切られた、この項目を説明するタグのリスト: HINT: Common tags include "Assembly", "FEM", "Mesh", "NURBS", etc. - HINT: Common tags include "Assembly", "FEM", "Mesh", "NURBS", etc. + ヒント: 一般的なタグには "Assembly", "FEM", "Mesh", "NURBS"などがあります。 @@ -377,7 +377,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore These and other settings are available in the FreeCAD Preferences window. - These and other settings are available in the FreeCAD Preferences window. + これらの設定は FreeCAD の設定ウィンドウで利用できます。 @@ -385,32 +385,32 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Edit Dependency - Edit Dependency + 依存関係を編集 Dependency Type - Dependency Type + 依存関係の種類 Dependency - Dependency + 依存関係 Package name, if "Other..." - Package name, if "Other..." + パッケージ名、もし「その他...」の場合 NOTE: If "Other..." is selected, the package is not in the ALLOWED_PYTHON_PACKAGES.txt file, and will not be automatically installed by the Addon Manager. Submit a PR at <a href="https://github.com/FreeCAD/FreeCAD-addons">https://github.com/FreeCAD/FreeCAD-addons</a> to request addition of a package. - NOTE: If "Other..." is selected, the package is not in the ALLOWED_PYTHON_PACKAGES.txt file, and will not be automatically installed by the Addon Manager. Submit a PR at <a href="https://github.com/FreeCAD/FreeCAD-addons">https://github.com/FreeCAD/FreeCAD-addons</a> to request addition of a package. + 注意: 「その他...」を選択すると、パッケージは ALLOWED_PYTHON_PACKAGES.txt ファイルに記載されず、アドオン・マネージャーは自動インストールを行ないません。パッケージを追加したい場合は <a href="https://github.com/FreeCAD/FreeCAD-addons">https://github.com/FreeCAD/FreeCAD-addons</a> へ PR を投稿してください。 If this is an optional dependency, the Addon Manager will offer to install it (when possible), but will not block installation if the user chooses not to, or cannot, install the package. - If this is an optional dependency, the Addon Manager will offer to install it (when possible), but will not block installation if the user chooses not to, or cannot, install the package. + これがオプションの依存関係である場合、アドオン・マネージャーは (可能であれば) そのインストールを提供しますが、ユーザーがパッケージをインストールしない、またはできない場合でも、インストールをブロックはしません。 @@ -436,7 +436,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore <h1>Package Name</h1> - <h1>Package Name</h1> + <h1>パッケージ名</h1> @@ -448,7 +448,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore (tags) - (tags) + (タグ) @@ -465,7 +465,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Update Available - Update Available + 利用可能なアップデートがあります @@ -499,12 +499,12 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore People - People + 人々 Kind - Kind + 種類 @@ -574,7 +574,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Addon manager options - Addon manager options + アドオン・マネージャーのオプション @@ -606,32 +606,32 @@ installed addons will be checked for available updates Daily - Daily + 日次 Weekly - Weekly + 週次 Hide Addons marked Python 2 Only - Hide Addons marked Python 2 Only + Python 2 専用のアドオンを非表示 Hide Addons marked Obsolete - Hide Addons marked Obsolete + 廃止されたアドオンを非表示 Hide Addons that require a newer version of FreeCAD - Hide Addons that require a newer version of FreeCAD + 新しいバージョンの FreeCAD が必要なアドオンを非表示 Custom repositories - Custom repositories + カスタムリポジトリ @@ -656,12 +656,12 @@ installed addons will be checked for available updates Path to Python executable (optional): - Path to Python executable (optional): + Python 実行ファイルのパス (オプション): Path to git executable (optional): - Path to git executable (optional): + Git 実行ファイルのパス (オプション): @@ -681,17 +681,17 @@ installed addons will be checked for available updates Show option to change branches (requires git) - Show option to change branches (requires git) + ブランチ変更オプションを表示 (gitが必要) Disable git (fall back to ZIP downloads only) - Disable git (fall back to ZIP downloads only) + Git を無効にする (ZIP ダウンロードのみに戻ります) Activate Addon Manager options intended for developers of new Addons. - Activate Addon Manager options intended for developers of new Addons. + 新しいアドオン開発者向けのアドオン・マネージャー・オプションを有効にします。 @@ -798,12 +798,12 @@ installed addons will be checked for available updates Updating Addons - Updating Addons + アドオンを更新 Updating out-of-date addons... - Updating out-of-date addons... + 廃止されたアドオンを更新... @@ -811,12 +811,12 @@ installed addons will be checked for available updates Content Item - Content Item + コンテンツアイテム Content type: - Content type: + コンテンツの種類: @@ -903,17 +903,17 @@ installed addons will be checked for available updates Dependencies... - Dependencies... + 依存関係... FreeCAD Versions... - FreeCAD Versions... + FreeCAD バージョン... Other Metadata - Other Metadata + その他のメタデータ @@ -933,22 +933,22 @@ installed addons will be checked for available updates Semantic (1.2.3-beta) or CalVer (2022.08.30) styles supported - Semantic (1.2.3-beta) or CalVer (2022.08.30) styles supported + セマンティック・スタイル (1.2.3-beta) 、CalVer スタイル (20202.08.30) をサポート Set to today (CalVer style) - Set to today (CalVer style) + 今日に設定 (CalVer スタイル) Display Name - Display Name + 表示名 Any fields left blank are inherited from the top-level Addon metadata, so technically they are all optional. For Addons with multiple content items, each item should provide a unique Display Name and Description. - Any fields left blank are inherited from the top-level Addon metadata, so technically they are all optional. For Addons with multiple content items, each item should provide a unique Display Name and Description. + 空白のフィールドは、トップレベルの Addon メタデータから継承されるため、実質的にはすべてオプションです。 複数のコンテンツアイテムを持つアドオンでは、各アイテムには一意な表示名と説明を指定する必要があります。 @@ -956,7 +956,7 @@ installed addons will be checked for available updates Add button? - Add button? + ボタンを追加しますか？ @@ -1146,7 +1146,7 @@ installed addons will be checked for available updates Add button? - Add button? + ボタンを追加しますか？ @@ -1203,7 +1203,7 @@ installed addons will be checked for available updates Addon manager - Addon manager + アドオン・マネージャー @@ -1213,12 +1213,12 @@ installed addons will be checked for available updates Restart now - Restart now + 今すぐ再起動 Restart later - Restart later + 後で再起動 @@ -1229,7 +1229,7 @@ installed addons will be checked for available updates Updating cache... - Updating cache... + キャッシュを更新しています... @@ -1242,7 +1242,7 @@ installed addons will be checked for available updates Checking for updates... - Checking for updates... + アップデートを確認中… @@ -1306,7 +1306,7 @@ installed addons will be checked for available updates Updating... - Updating... + 更新中... @@ -1355,24 +1355,24 @@ installed addons will be checked for available updates Removing Addon - Removing Addon + アドオンを削除中 Removing {} - Removing {} + {} を削除 Uninstall complete - Uninstall complete + アンインストール完了 Uninstall failed - Uninstall failed + アンインストールに失敗しました @@ -1382,17 +1382,17 @@ installed addons will be checked for available updates Version {version} installed on {date} - Version {version} installed on {date} + {date} にバージョン {version} がインストールされました Version {version} installed - Version {version} installed + バージョン {version} がインストールされました Installed on {date} - Installed on {date} + {date} にインストールされました @@ -1400,7 +1400,7 @@ installed addons will be checked for available updates Installed - Installed + インストール済み @@ -1415,7 +1415,7 @@ installed addons will be checked for available updates An update is available - An update is available + 利用可能なアップデートがあります @@ -1450,22 +1450,22 @@ installed addons will be checked for available updates WARNING: This addon is obsolete - WARNING: This addon is obsolete + 警告: このアドオンは廃止されています。 WARNING: This addon is Python 2 Only - WARNING: This addon is Python 2 Only + 警告: このアドオンは Python 2 のみです。 WARNING: This addon requires FreeCAD - WARNING: This addon requires FreeCAD + 警告: このアドオンは FreeCAD が必要です。 WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. - WARNING: This addon is currently installed, but disabled. Use the 'enable' button to re-enable. + 警告: このアドオンは現在インストールされていますが無効になっています。再度有効にするには '有効' ボタンを使用してください。 @@ -1481,7 +1481,7 @@ installed addons will be checked for available updates This Addon will be enabled next time you restart FreeCAD. - This Addon will be enabled next time you restart FreeCAD. + このアドオンは次回 FreeCAD を再起動したときに有効になります。 @@ -1589,7 +1589,7 @@ installed addons will be checked for available updates Other... For providing a license other than one listed - Other... + その他... @@ -1599,7 +1599,7 @@ installed addons will be checked for available updates Location for new license file - Location for new license file + 新しいライセンスファイルの場所 @@ -1656,7 +1656,7 @@ installed addons will be checked for available updates Python - Python + Python @@ -1666,28 +1666,28 @@ installed addons will be checked for available updates Internal Workbench - Internal Workbench + 内部ワークベンチ External Addon - External Addon + 外部アドオン Python Package - Python Package + Python パッケージ Other... - Other... + その他... This addon requires Python packages that are not installed, and cannot be installed automatically. To use this workbench you must install the following Python packages manually: - This addon requires Python packages that are not installed, and cannot be installed automatically. To use this workbench you must install the following Python packages manually: + このアドオンは必要な Python パッケージがインストールされていおらず、自動ではインストールできません。 このワークベンチを使用するには、以下の Python パッケージを手動でインストールする必要があります。 @@ -2122,7 +2122,7 @@ installed addons will be checked for available updates Kind Table header for git ref type (e.g. either Tag or Branch) - Kind + 種類 @@ -2211,7 +2211,7 @@ installed addons will be checked for available updates Unable to retrieve a description from the wiki for macro {} - Unable to retrieve a description from the wiki for macro {} + マクロ {} の説明をウィキから取得できません。 @@ -2391,7 +2391,7 @@ installed addons will be checked for available updates Retrieving macro description... - Retrieving macro description... + マクロの説明を取得... diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.qm index 5b5457bb73..fb476290e8 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts index 7e0a479914..abd61d2c3d 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts @@ -272,7 +272,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Stop the cache update - Stop the cache update + Cache update stoppen @@ -292,7 +292,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore Check for updates - Check for updates + Op updates controleren @@ -678,7 +678,7 @@ installed addons will be checked for available updates Advanced Options - Advanced Options + Geavanceerde Opties @@ -759,12 +759,12 @@ installed addons will be checked for available updates Installed version - Installed version + Geïnstalleerde versie Available version - Available version + Beschikbare versie @@ -813,7 +813,7 @@ installed addons will be checked for available updates Content Item - Content Item + Inhoud Item @@ -1215,12 +1215,12 @@ installed addons will be checked for available updates Restart now - Restart now + Nu opnieuw opstarten Restart later - Restart later + Later opnieuw opstarten @@ -1231,7 +1231,7 @@ installed addons will be checked for available updates Updating cache... - Updating cache... + Bezig met updaten van cache... @@ -1287,7 +1287,7 @@ installed addons will be checked for available updates New Python Version Detected - New Python Version Detected + Nieuwe Python versie gedetecteerd @@ -1350,7 +1350,7 @@ installed addons will be checked for available updates Are you sure you want to uninstall {}? - Are you sure you want to uninstall {}? + Weet u zeker dat u {} wilt de-installeren? @@ -1368,7 +1368,7 @@ installed addons will be checked for available updates Uninstall complete - Uninstall complete + De-installatie voltooid @@ -1412,7 +1412,7 @@ installed addons will be checked for available updates Update available to version - Update available to version + Update beschikbaar voor versie @@ -1437,12 +1437,12 @@ installed addons will be checked for available updates Update check in progress - Update check in progress + Controle van updates bezig Automatic update checks disabled - Automatic update checks disabled + Automatische updatecontroles uitgeschakeld @@ -1530,7 +1530,7 @@ installed addons will be checked for available updates Check for Update - Check for Update + Controleren op update @@ -1565,17 +1565,17 @@ installed addons will be checked for available updates Checking connection - Checking connection + Verbinding controleren Checking for connection to GitHub... - Checking for connection to GitHub... + Controleren op verbinding met GitHub... Connection failed - Connection failed + Verbinden mislukt @@ -1591,7 +1591,7 @@ installed addons will be checked for available updates Other... For providing a license other than one listed - Other... + Andere... @@ -1601,7 +1601,7 @@ installed addons will be checked for available updates Location for new license file - Location for new license file + Locatie van nieuwe licentiebestand @@ -1621,7 +1621,7 @@ installed addons will be checked for available updates Unable to locate icon at {} - Unable to locate icon at {} + Kan pictogram niet vinden op {} @@ -1684,7 +1684,7 @@ installed addons will be checked for available updates Other... - Other... + Andere... @@ -1694,7 +1694,7 @@ installed addons will be checked for available updates Too many to list - Too many to list + Te veel om weer te geven @@ -1704,7 +1704,7 @@ installed addons will be checked for available updates Missing Requirement - Missing Requirement + Ontbrekende Vereiste @@ -1800,12 +1800,12 @@ installed addons will be checked for available updates Cancelling - Cancelling + Annuleren Cancelling installation of '{}' - Cancelling installation of '{}' + Installatie van '{}' annuleren @@ -1816,18 +1816,18 @@ installed addons will be checked for available updates Installation Failed - Installation Failed + Installatie mislukt Failed to install {} - Failed to install {} + Installatie van {} is mislukt Create new toolbar - Create new toolbar + Nieuwe werkbalk maken @@ -1855,7 +1855,7 @@ installed addons will be checked for available updates Invalid metadata in file {} - Invalid metadata in file {} + Ongeldige metadata in het bestand {} @@ -1932,7 +1932,7 @@ installed addons will be checked for available updates Installation failed - Installation failed + Installatie mislukt @@ -1954,7 +1954,7 @@ installed addons will be checked for available updates Filter is valid - Filter is valid + Filter is geldig @@ -1979,7 +1979,7 @@ installed addons will be checked for available updates Maintainers: - Maintainers: + Beheerders: @@ -2008,7 +2008,7 @@ installed addons will be checked for available updates Pending restart - Pending restart + Wachten op herstarten @@ -2019,7 +2019,7 @@ installed addons will be checked for available updates Installed version - Installed version + Geïnstalleerde versie @@ -2034,7 +2034,7 @@ installed addons will be checked for available updates Available version - Available version + Beschikbare versie @@ -2099,7 +2099,7 @@ installed addons will be checked for available updates There are local changes - There are local changes + Er zijn lokale wijzigingen @@ -2269,12 +2269,12 @@ installed addons will be checked for available updates Removed extra installed file {} - Removed extra installed file {} + Extra geïnstalleerd bestand {} verwijderd Error while trying to remove extra installed file {} - Error while trying to remove extra installed file {} + Fout bij het verwijderen van extra geïnstalleerd bestand {} @@ -2398,12 +2398,12 @@ installed addons will be checked for available updates Retrieving info from git - Retrieving info from git + Informatie ophalen van git Retrieving info from wiki - Retrieving info from wiki + Informatie ophalen van wiki diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm index 9fafd0c372..8a414b25bc 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts index 9b6600ad2c..99a928f0ce 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts @@ -100,7 +100,7 @@ Do you want the Addon Manager to install them automatically? Choose "Ignore" to install the Addon without installing the dependencies. Ten dodatek ma następujące wymagane i opcjonalne zależności. Musisz je zainstalować, zanim ten dodatek będzie mógł być używany. -Czy chcesz, aby Menadżer dodatków zainstalował je automatycznie? Wybierz "Ignoruj" aby zainstalować dodatek bez instalowania zależności. +Czy chcesz, aby Menadżer dodatków zainstalował je automatycznie? Wybierz "Zignoruj" aby zainstalować dodatek bez instalowania zależności. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.qm index 31187e1bf8..1d7d77e822 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts index 9ee61450d6..030d95c0e8 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts @@ -54,7 +54,7 @@ Update Available - Update Available + Na voljo je nadgradnja @@ -272,7 +272,7 @@ Ali želite, da jih upravljalinik dodatkov namesti samodejno? Izberite "Pre Stop the cache update - Stop the cache update + Zaustavi posodobitev predpomnilnika @@ -465,7 +465,7 @@ Ali želite, da jih upravljalinik dodatkov namesti samodejno? Izberite "Pre Update Available - Update Available + Na voljo je nadgradnja @@ -1176,23 +1176,23 @@ preveril razpoložljivost posodobitev za nameščene dodatke Starting up... - Starting up... + Pričenjanje ... Loading addon information - Loading addon information + Nalaganje podatkov o dodatku Worker process {} is taking a long time to stop... - Worker process {} is taking a long time to stop... + Delovni proces {} se predolgo zaustavlja ... Previous cache process was interrupted, restarting... - Previous cache process was interrupted, restarting... + Predhodno predpomnenje je bilo prekinjeno, ponovni zagon ... @@ -2361,7 +2361,7 @@ preveril razpoložljivost posodobitev za nameščene dodatke Addon Manager: a worker process failed to complete while fetching {name} - Addon Manager: a worker process failed to complete while fetching {name} + Upravljalnik dodatkov: delovni proces je med pridobivanjem {name} spodletel @@ -2371,7 +2371,7 @@ preveril razpoložljivost posodobitev za nameščene dodatke Addon Manager: a worker process failed to halt ({name}) - Addon Manager: a worker process failed to halt ({name}) + Upravljalnik dodatkov: delovni proces se ni mogel zaustaviti ({name}) diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.qm index a833143563..aa4013fd4c 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts index ede6674f63..1a25a9ded9 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts @@ -678,7 +678,7 @@ installed addons will be checked for available updates Advanced Options - Advanced Options + Gelişmiş seçenekler @@ -698,7 +698,7 @@ installed addons will be checked for available updates Addon developer mode - Addon developer mode + Eklenti geliştirici modu @@ -769,7 +769,7 @@ installed addons will be checked for available updates Used by - Used by + Kullanıldı @@ -779,7 +779,7 @@ installed addons will be checked for available updates Update all available - Update all available + Tüm uygun eklentileri güncelle @@ -800,7 +800,7 @@ installed addons will be checked for available updates Updating Addons - Updating Addons + Eklentiler güncellenyor @@ -813,12 +813,12 @@ installed addons will be checked for available updates Content Item - Content Item + İçerik öğeleri Content type: - Content type: + İçerik tipi: @@ -828,7 +828,7 @@ installed addons will be checked for available updates Preference Pack - Preference Pack + Ön tanımlar paketi @@ -1176,7 +1176,7 @@ installed addons will be checked for available updates Starting up... - Starting up... + Başlatılıyor... diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.qm index 4973f4841d..5127b40daf 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts index eaf15ecd00..db72574169 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts @@ -843,7 +843,7 @@ installed addons will be checked for available updates This is the only item in the Addon - This is the only item in the Addon + 這是附加元件中唯一的項目 @@ -1297,7 +1297,7 @@ installed addons will be checked for available updates Processing, please wait... - Processing, please wait... + 處理中，請稍候... @@ -2489,7 +2489,7 @@ installed addons will be checked for available updates Finished updating the following addons - Finished updating the following addons + 已完成更新底下附加元件 diff --git a/src/Mod/Arch/Resources/translations/Arch.ts b/src/Mod/Arch/Resources/translations/Arch.ts index 433d9ebc7b..f87c2f4975 100644 --- a/src/Mod/Arch/Resources/translations/Arch.ts +++ b/src/Mod/Arch/Resources/translations/Arch.ts @@ -5937,92 +5937,92 @@ Building creation aborted. Workbench - + Structure tools - + Axis tools - + Panel tools - + Material tools - + Pipe tools - + Rebar tools - + Arch tools - + Draft creation tools - + Draft annotation tools - + Draft modification tools - + Draft snap - - - - &Arch - - - - - - Utilities - - - - - &Draft + &Arch + + Utilities + + + + + + + + &Draft + + + + Creation - + Annotation - + Modification @@ -6030,12 +6030,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools - + Create various types of rebars, including U-shaped, L-shaped, and stirrup @@ -6747,23 +6747,23 @@ Building creation aborted. QObject - - + + Arch - - - - + + + + Draft - - - + + + Import-Export diff --git a/src/Mod/Arch/Resources/translations/Arch_be.ts b/src/Mod/Arch/Resources/translations/Arch_be.ts index d10e8fdfac..059ee821ff 100644 --- a/src/Mod/Arch/Resources/translations/Arch_be.ts +++ b/src/Mod/Arch/Resources/translations/Arch_be.ts @@ -6037,92 +6037,92 @@ Building creation aborted. Workbench - + Structure tools Інструменты канструкцыі - + Axis tools Інструменты восей - + Panel tools Інструменты панэлі - + Material tools Інструменты матэрыялу - + Pipe tools Інструменты трубаправоду - + Rebar tools Інструменты арматуры - + Arch tools Інструменты Архітэктуры - + Draft creation tools Інструменты стварэння Чарнавіка - + Draft annotation tools Інструменты заметак Чарнавіка - + Draft modification tools Інструменты змены Чарнавіка - + Draft snap Прывязаць Чарнавік - - + + &Arch &Архітэктура - - + + Utilities Службовыя - - - - + + + + &Draft &Чарнавік - + Creation Стварэнне - + Annotation Заметка - + Modification Змена @@ -6130,12 +6130,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools Інструменты арматуры - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Стварайце розныя тыпы арматуры, уключаючы U-вобразную, L-вобразную і хамуты @@ -6847,23 +6847,23 @@ Building creation aborted. QObject - - + + Arch Архітэктура - - - - + + + + Draft Асадка - - - + + + Import-Export Імпарт-Экспарт diff --git a/src/Mod/Arch/Resources/translations/Arch_ca.qm b/src/Mod/Arch/Resources/translations/Arch_ca.qm index 7c5e319e69..52615fa19a 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ca.qm and b/src/Mod/Arch/Resources/translations/Arch_ca.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ca.ts b/src/Mod/Arch/Resources/translations/Arch_ca.ts index 3793616563..2e4c3dacaf 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ca.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ca.ts @@ -334,7 +334,7 @@ Deixeu en blanc per a utilitzar tots els objectes del document An optional semicolon (;) separated list of property:value filters. Prepend ! to a property name to invert the effect of the filter (exclude objects that match the filter). Objects whose property contains the value will be matched. Examples of valid filters (everything is case-insensitive): Name:Wall - Will only consider objects with 'wall' in their name (internal name); !Name:Wall - Will only consider objects which DON'T have 'wall' in their name (internal name); Description:Win - Will only consider objects with 'win' in their description; !Label:Win - Will only consider objects which DO NOT have 'win' in their label; IfcType:Wall - Will only consider objects which Ifc Type is 'Wall'; !Tag:Wall - Will only consider objects which tag is NOT 'Wall'. If you leave this field empty, no filtering is applied - An optional semicolon (;) separated list of property:value filters. Prepend ! to a property name to invert the effect of the filter (exclude objects that match the filter). Objects whose property contains the value will be matched. Examples of valid filters (everything is case-insensitive): Name:Wall - Will only consider objects with 'wall' in their name (internal name); !Name:Wall - Will only consider objects which DON'T have 'wall' in their name (internal name); Description:Win - Will only consider objects with 'win' in their description; !Label:Win - Will only consider objects which DO NOT have 'win' in their label; IfcType:Wall - Will only consider objects which Ifc Type is 'Wall'; !Tag:Wall - Will only consider objects which tag is NOT 'Wall'. If you leave this field empty, no filtering is applied + Una llista de propietats opcional separada per punt i coma (;):valors a filtrar. Avantposa el símbol ! a una propietat per invertir l'efecte del filtre (exclou objectes que coincideixen amb el filtre). S'obtindran els objectes que coincideixin amb les propietats del filtre. Exemples de filtres vàlids (majúscules o minúscules indistintament): Name:Paret - Considerará només objectes amb 'paret' al seu nom (nom intern); !Name:Paret - Considerará només objectes que no tinguin 'paret' al seu nom (nom intern); Description:Win - Considerará només objectes amb 'win' a la seva descripció; !Label:Win - Considerará només objectes que no tinguin 'paret' a la seva etiqueta; IfcType:Paret - Considerará només objectes amb 'paret' com a IfcType; !Tag:Paret - Considerará només objectes que no tinguin 'paret' com a Tag. Si deixes buit aquest camp, no s'aplicarà cap filtre @@ -5995,92 +5995,92 @@ Building creation aborted. Workbench - + Structure tools Structure tools - + Axis tools Axis tools - + Panel tools Panel tools - + Material tools Material tools - + Pipe tools Pipe tools - + Rebar tools Rebar tools - + Arch tools Arch tools - + Draft creation tools Draft creation tools - + Draft annotation tools Draft annotation tools - + Draft modification tools Draft modification tools - + Draft snap Draft snap - - + + &Arch &Arch - - + + Utilities Utilitats - - - - + + + + &Draft &Draft - + Creation Creation - + Annotation Anotació - + Modification Modification @@ -6088,12 +6088,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools Rebar tools - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Create various types of rebars, including U-shaped, L-shaped, and stirrup @@ -6805,23 +6805,23 @@ Building creation aborted. QObject - - + + Arch Arquitectura - - - - + + + + Draft Calat - - - + + + Import-Export Importació-exportació diff --git a/src/Mod/Arch/Resources/translations/Arch_cs.ts b/src/Mod/Arch/Resources/translations/Arch_cs.ts index a5e17acb7e..c0152e193d 100644 --- a/src/Mod/Arch/Resources/translations/Arch_cs.ts +++ b/src/Mod/Arch/Resources/translations/Arch_cs.ts @@ -6027,92 +6027,92 @@ Building creation aborted. Workbench - + Structure tools Structure tools - + Axis tools Axis tools - + Panel tools Panel tools - + Material tools Výběr materiálu - + Pipe tools Potrubí - + Rebar tools Rebar tools - + Arch tools Arch tools - + Draft creation tools Nástroje pro vytváření návrhů - + Draft annotation tools Nástroje pro anotaci návrhů - + Draft modification tools Nástroje pro úpravu návrhu - + Draft snap Snímek konceptu - - + + &Arch &Arch - - + + Utilities Nástroje - - - - + + + + &Draft &Draft - + Creation Creation - + Annotation Vysvětlivka - + Modification Modification @@ -6120,12 +6120,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools Rebar tools - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Create various types of rebars, including U-shaped, L-shaped, and stirrup @@ -6837,23 +6837,23 @@ Building creation aborted. QObject - - + + Arch Oblouk - - - - + + + + Draft Ponor - - - + + + Import-Export Import-Export diff --git a/src/Mod/Arch/Resources/translations/Arch_de.qm b/src/Mod/Arch/Resources/translations/Arch_de.qm index 25b92aa292..a465a5c33c 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_de.qm and b/src/Mod/Arch/Resources/translations/Arch_de.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_de.ts b/src/Mod/Arch/Resources/translations/Arch_de.ts index 5929f2bdf4..faed275ffb 100644 --- a/src/Mod/Arch/Resources/translations/Arch_de.ts +++ b/src/Mod/Arch/Resources/translations/Arch_de.ts @@ -4216,7 +4216,7 @@ Gebäudeerstellung abgebrochen. Thickness of the web - Thickness of the web + Dicke des Netzes @@ -4232,7 +4232,7 @@ Gebäudeerstellung abgebrochen. Thickness of the webs - Thickness of the webs + Dicke der Netze @@ -5513,7 +5513,7 @@ Gebäudeerstellung abgebrochen. The font to use for texts - The font to use for texts + Die für Texte zu verwendende Schriftart @@ -5993,92 +5993,92 @@ Gebäudeerstellung abgebrochen. Workbench - + Structure tools Structure tools - + Axis tools Achsenwerkzeuge - + Panel tools Panel tools - + Material tools Materialwerkzeuge - + Pipe tools Rohrwerkzeuge - + Rebar tools Rebar tools - + Arch tools Arch Werkzeuge - + Draft creation tools Draft-Werkzeuge zum Erstellen - + Draft annotation tools Draft-Werkzeuge zum Beschriften - + Draft modification tools Draft-Werkzeuge zum Bearbeiten - + Draft snap Draft-Einrasten - - + + &Arch &Arch - - + + Utilities Dienstprogramme - - - - + + + + &Draft &Draft - + Creation Erstellung - + Annotation Anmerkung - + Modification Änderung @@ -6086,12 +6086,12 @@ Gebäudeerstellung abgebrochen. Arch_RebarTools - + Rebar tools Rebar tools - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Erstellen verschiedener Arten von Bewehrungsstäben, einschließlich U-förmiger, L-förmiger und bügelförmiger Stäbe @@ -6803,23 +6803,23 @@ Gebäudeerstellung abgebrochen. QObject - - + + Arch Arch - - - - + + + + Draft Draft - - - + + + Import-Export Import / Export diff --git a/src/Mod/Arch/Resources/translations/Arch_el.ts b/src/Mod/Arch/Resources/translations/Arch_el.ts index c6df2a295f..03038fc42d 100644 --- a/src/Mod/Arch/Resources/translations/Arch_el.ts +++ b/src/Mod/Arch/Resources/translations/Arch_el.ts @@ -6024,92 +6024,92 @@ Building creation aborted. Workbench - + Structure tools Structure tools - + Axis tools Axis tools - + Panel tools Panel tools - + Material tools Material tools - + Pipe tools Pipe tools - + Rebar tools Rebar tools - + Arch tools Arch tools - + Draft creation tools Draft creation tools - + Draft annotation tools Draft annotation tools - + Draft modification tools Draft modification tools - + Draft snap Draft snap - - + + &Arch &Arch - - + + Utilities Βοηθήματα - - - - + + + + &Draft &Draft - + Creation Creation - + Annotation Σχολιασμός - + Modification Modification @@ -6117,12 +6117,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools Rebar tools - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Create various types of rebars, including U-shaped, L-shaped, and stirrup @@ -6834,23 +6834,23 @@ Building creation aborted. QObject - - + + Arch Arch - - - - + + + + Draft Βύθισμα - - - + + + Import-Export Εισαγωγή-Εξαγωγή diff --git a/src/Mod/Arch/Resources/translations/Arch_es-AR.qm b/src/Mod/Arch/Resources/translations/Arch_es-AR.qm index 0f9bb39ba2..d55e20dda3 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_es-AR.qm and b/src/Mod/Arch/Resources/translations/Arch_es-AR.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_es-AR.ts b/src/Mod/Arch/Resources/translations/Arch_es-AR.ts index 5150cb5ccb..9e02057452 100644 --- a/src/Mod/Arch/Resources/translations/Arch_es-AR.ts +++ b/src/Mod/Arch/Resources/translations/Arch_es-AR.ts @@ -613,7 +613,7 @@ Deje en blanco para usar todos los objetos del documento Start - Iniciar + Inicio @@ -6020,92 +6020,92 @@ Creación de construcción cancelada. Workbench - + Structure tools Herramientas de estructura - + Axis tools Herramientas de ejes - + Panel tools Herramientas del panel - + Material tools Herramientas de material - + Pipe tools Herramientas de tubería - + Rebar tools Reiniciar herramientas - + Arch tools Herramientas de arquitectura - + Draft creation tools Herramientas de creación de Esbozo - + Draft annotation tools Herramientas de anotación de Esbozo - + Draft modification tools Herramientas de modificación de Esbozo - + Draft snap Referencia a objetos de Boceto - - + + &Arch &Arco - - + + Utilities Utilidades - - - - + + + + &Draft &Proyecto - + Creation Creación - + Annotation Anotación - + Modification Modificación @@ -6113,12 +6113,12 @@ Creación de construcción cancelada. Arch_RebarTools - + Rebar tools Reiniciar herramientas - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Crear varios tipos de refuerzo, incluyendo forma-U, forma-L, y estribo @@ -6830,23 +6830,23 @@ Creación de construcción cancelada. QObject - - + + Arch Arquitectura - - - - + + + + Draft Calado - - - + + + Import-Export Importar-Exportar diff --git a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts index dd3506a245..955f03373d 100644 --- a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts +++ b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts @@ -6020,92 +6020,92 @@ Creación de construcción cancelada. Workbench - + Structure tools Herramientas de estructura - + Axis tools Herramientas de ejes - + Panel tools Herramientas del panel - + Material tools Herramientas de material - + Pipe tools Herramientas de tubería - + Rebar tools Reiniciar herramientas - + Arch tools Herramientas de arquitectura - + Draft creation tools Herramientas de creación de Esbozo - + Draft annotation tools Herramientas de anotación de Esbozo - + Draft modification tools Herramientas de modificación de Esbozo - + Draft snap Referencia a objetos de Boceto - - + + &Arch &Arco - - + + Utilities Utilidades - - - - + + + + &Draft &Proyecto - + Creation Creación - + Annotation Anotación - + Modification Modificación @@ -6113,12 +6113,12 @@ Creación de construcción cancelada. Arch_RebarTools - + Rebar tools Reiniciar herramientas - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Crear varios tipos de refuerzo, incluyendo forma-U, forma-L, y estribo @@ -6830,23 +6830,23 @@ Creación de construcción cancelada. QObject - - + + Arch Arco - - - - + + + + Draft Calado - - - + + + Import-Export Importar/Exportar diff --git a/src/Mod/Arch/Resources/translations/Arch_eu.ts b/src/Mod/Arch/Resources/translations/Arch_eu.ts index f075587ee6..86dd5dd060 100644 --- a/src/Mod/Arch/Resources/translations/Arch_eu.ts +++ b/src/Mod/Arch/Resources/translations/Arch_eu.ts @@ -6026,92 +6026,92 @@ Eraikinaren sorrera utzi egin da. Workbench - + Structure tools Egitura-tresnak - + Axis tools Ardatz-tresnak - + Panel tools Panel-tresnak - + Material tools Material-tresnak - + Pipe tools Hodi-tresnak - + Rebar tools Armadura-barren tresnak - + Arch tools Arku-tresnak - + Draft creation tools Zirriborroak sortzeko tresnak - + Draft annotation tools Zirriborroetan oharpenak sortzeko tresnak - + Draft modification tools Zirriborroak aldatzeko tresnak - + Draft snap Zirriborro-atxikitzea - - + + &Arch &Arkua - - + + Utilities Utilitateak - - - - + + + + &Draft &Zirriborroa - + Creation Sorrera - + Annotation Oharpena - + Modification Aldaketa @@ -6119,12 +6119,12 @@ Eraikinaren sorrera utzi egin da. Arch_RebarTools - + Rebar tools Armadura-barren tresnak - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Sortu armadura-barren mota desberdinak, U formakoak, L formakoak eta estribu formakoak barne @@ -6836,23 +6836,23 @@ Eraikinaren sorrera utzi egin da. QObject - - + + Arch Arkitektura - - - - + + + + Draft Zirriborroa - - - + + + Import-Export Inportatu-Esportatu diff --git a/src/Mod/Arch/Resources/translations/Arch_fi.ts b/src/Mod/Arch/Resources/translations/Arch_fi.ts index 1e790ec0bf..aab958ae7d 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fi.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fi.ts @@ -6028,92 +6028,92 @@ Building creation aborted. Workbench - + Structure tools Structure tools - + Axis tools Axis tools - + Panel tools Panel tools - + Material tools Material tools - + Pipe tools Pipe tools - + Rebar tools Rebar tools - + Arch tools Arch tools - + Draft creation tools Draft creation tools - + Draft annotation tools Draft annotation tools - + Draft modification tools Draft modification tools - + Draft snap Draft snap - - + + &Arch &Arch - - + + Utilities Apuvälineet - - - - + + + + &Draft &Draft - + Creation Creation - + Annotation Huomautus - + Modification Modification @@ -6121,12 +6121,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools Rebar tools - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Create various types of rebars, including U-shaped, L-shaped, and stirrup @@ -6838,23 +6838,23 @@ Building creation aborted. QObject - - + + Arch Arch - - - - + + + + Draft Syväys (vesirajasta pohjaan) - - - + + + Import-Export Tuo/Vie diff --git a/src/Mod/Arch/Resources/translations/Arch_fr.qm b/src/Mod/Arch/Resources/translations/Arch_fr.qm index 093d805a3a..90184b5b03 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_fr.qm and b/src/Mod/Arch/Resources/translations/Arch_fr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_fr.ts b/src/Mod/Arch/Resources/translations/Arch_fr.ts index 6902fb083e..70dab46d44 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fr.ts @@ -5955,7 +5955,7 @@ La création du bâtiment est abandonnée. Creates an equipment from a selected object (Part or Mesh) - Crée un équipement à partir d'un objet sélectionné (Part ou Mesh) + Créer un équipement à partir d'un objet sélectionné (Part ou Mesh) @@ -5981,7 +5981,7 @@ La création du bâtiment est abandonnée. Creates a BuildingPart including selected objects - Crée une partie de bâtiment incluant les objets sélectionnés + Créer une partie de bâtiment incluant les objets sélectionnés @@ -5995,92 +5995,92 @@ La création du bâtiment est abandonnée. Workbench - + Structure tools Outils pour les structures - + Axis tools Outils pour les axes - + Panel tools Outils pour les panneaux - + Material tools Outils pour les matériaux - + Pipe tools Outils pour la tuyauterie - + Rebar tools Outils pour les armatures - + Arch tools Outils Arch - + Draft creation tools Outils de création de Draft - + Draft annotation tools Outils d'annotation de Draft - + Draft modification tools Outils de modification de Draft - + Draft snap Aimantation de Draft - - + + &Arch &Arch - - + + Utilities Utilitaires - - - - + + + + &Draft &Draft - + Creation Création - + Annotation Annotation - + Modification Modification @@ -6088,12 +6088,12 @@ La création du bâtiment est abandonnée. Arch_RebarTools - + Rebar tools Outils pour les armatures - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Créer différents types d'armatures, en forme de U, en forme de L et des étriers @@ -6108,7 +6108,7 @@ La création du bâtiment est abandonnée. Creates a profile - Crée un profilé + Créer un profilé @@ -6620,7 +6620,7 @@ La création du bâtiment est abandonnée. Adds the selected components to the active object - Ajoute les composants sélectionnés à l'objet actif + Ajouter les composants sélectionnés à l'objet actif @@ -6724,7 +6724,7 @@ La création du bâtiment est abandonnée. Starts survey - Prise de côtes + Prendre des cotes @@ -6805,23 +6805,23 @@ La création du bâtiment est abandonnée. QObject - - + + Arch Architecture - - - - + + + + Draft Tirant d'eau - - - + + + Import-Export Importer/Exporter diff --git a/src/Mod/Arch/Resources/translations/Arch_gl.ts b/src/Mod/Arch/Resources/translations/Arch_gl.ts index d49d664e27..1a2f1f9d4b 100644 --- a/src/Mod/Arch/Resources/translations/Arch_gl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_gl.ts @@ -6028,92 +6028,92 @@ Building creation aborted. Workbench - + Structure tools Structure tools - + Axis tools Axis tools - + Panel tools Panel tools - + Material tools Material tools - + Pipe tools Pipe tools - + Rebar tools Rebar tools - + Arch tools Arch tools - + Draft creation tools Draft creation tools - + Draft annotation tools Draft annotation tools - + Draft modification tools Draft modification tools - + Draft snap Draft snap - - + + &Arch &Arch - - + + Utilities Utilidades - - - - + + + + &Draft &Draft - + Creation Creation - + Annotation Apuntamento - + Modification Modification @@ -6121,12 +6121,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools Rebar tools - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Create various types of rebars, including U-shaped, L-shaped, and stirrup @@ -6838,23 +6838,23 @@ Building creation aborted. QObject - - + + Arch Arquitectura - - - - + + + + Draft Calado - - - + + + Import-Export Importar-Exportar diff --git a/src/Mod/Arch/Resources/translations/Arch_hr.ts b/src/Mod/Arch/Resources/translations/Arch_hr.ts index a90a3c88cf..3b5d272a32 100644 --- a/src/Mod/Arch/Resources/translations/Arch_hr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_hr.ts @@ -6090,92 +6090,92 @@ Stvaranje zgrade prekinuto. Workbench - + Structure tools Alati Konstrukcije - + Axis tools Alati Osi - + Panel tools Alati Pregrade - + Material tools Alati materijala - + Pipe tools Alati Cijevi - + Rebar tools Alati Građevinskog željeza - + Arch tools Alati Arhitekt - + Draft creation tools Alati kreiranja Nacrta - + Draft annotation tools Alati napomena Nacrta - + Draft modification tools Alati za izmjene Nacrta - + Draft snap prikvači na Nacrtu - - + + &Arch &Arhitektura - - + + Utilities Uslužni programi - - - - + + + + &Draft &Nacrt - + Creation Stvaranje - + Annotation Anotacija - + Modification Modifikacija @@ -6183,12 +6183,12 @@ Stvaranje zgrade prekinuto. Arch_RebarTools - + Rebar tools Alati Građevinskog željeza - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Izradite razne vrste armaturnih šipki, uključujući U-oblik, L-oblik i stremen @@ -6902,23 +6902,23 @@ Stvaranje zgrade prekinuto. QObject - - + + Arch Luk - - - - + + + + Draft Skica - - - + + + Import-Export Uvoz / izvoz diff --git a/src/Mod/Arch/Resources/translations/Arch_hu.ts b/src/Mod/Arch/Resources/translations/Arch_hu.ts index 27171f6733..e3193ec2e5 100644 --- a/src/Mod/Arch/Resources/translations/Arch_hu.ts +++ b/src/Mod/Arch/Resources/translations/Arch_hu.ts @@ -6028,92 +6028,92 @@ Building creation aborted. Workbench - + Structure tools Szerkezeti eszközök - + Axis tools Tengely eszközök - + Panel tools Panel eszközök - + Material tools Anyag eszközök - + Pipe tools Cső eszközök - + Rebar tools Betonacél eszközök - + Arch tools Építészeti eszközök - + Draft creation tools Tervrajzkészítő eszközök - + Draft annotation tools Tervrajz megjegyzési eszközök - + Draft modification tools Tervrajz módosítási eszközök - + Draft snap Tervrajz illesztés - - + + &Arch Építészet - - + + Utilities Kiegészítők - - - - + + + + &Draft Tervrajz - + Creation Létrehozás - + Annotation Jegyzet - + Modification Módosítás @@ -6121,12 +6121,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools Betonacél eszközök - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Hozzon létre különböző típusú betonacélokat, beleértve az U-alakút, L-alakút és kengyelt @@ -6838,23 +6838,23 @@ Building creation aborted. QObject - - + + Arch Architektúra - - - - + + + + Draft Tervrajz - - - + + + Import-Export Importálás-Exportálás diff --git a/src/Mod/Arch/Resources/translations/Arch_it.ts b/src/Mod/Arch/Resources/translations/Arch_it.ts index fdac444f5b..fac14488d8 100644 --- a/src/Mod/Arch/Resources/translations/Arch_it.ts +++ b/src/Mod/Arch/Resources/translations/Arch_it.ts @@ -6014,92 +6014,92 @@ Creazione Edificio interrotta. Workbench - + Structure tools Strumenti di Struttura - + Axis tools Strumenti per Assi - + Panel tools Strumenti Pannello - + Material tools Strumenti di Materiali - + Pipe tools Strumenti di Tubo - + Rebar tools Strumenti di Armatura - + Arch tools Strumenti di Arch - + Draft creation tools Strumenti di creazione Draft - + Draft annotation tools Strumenti di annotazioni Draft - + Draft modification tools Strumenti di modifica Draft - + Draft snap Draft Snap - - + + &Arch &Arch - - + + Utilities Utilità - - - - + + + + &Draft &Draft - + Creation Creazione - + Annotation Annotazione - + Modification Modifica @@ -6107,12 +6107,12 @@ Creazione Edificio interrotta. Arch_RebarTools - + Rebar tools Strumenti di Armatura - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Creare vari tipi di armatura, tra cui a forma di U, a forma di L e staffa @@ -6824,23 +6824,23 @@ Creazione Edificio interrotta. QObject - - + + Arch Arch - - - - + + + + Draft Pescaggio - - - + + + Import-Export Importa/Esporta diff --git a/src/Mod/Arch/Resources/translations/Arch_ja.ts b/src/Mod/Arch/Resources/translations/Arch_ja.ts index f9d7017614..413224633a 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ja.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ja.ts @@ -6013,92 +6013,92 @@ Building creation aborted. Workbench - + Structure tools Structure tools - + Axis tools Axis tools - + Panel tools Panel tools - + Material tools Material tools - + Pipe tools Pipe tools - + Rebar tools Rebar tools - + Arch tools Arch tools - + Draft creation tools Draft creation tools - + Draft annotation tools Draft annotation tools - + Draft modification tools Draft modification tools - + Draft snap Draft snap - - + + &Arch &Arch - - + + Utilities ユーティリティ - - - - + + + + &Draft &Draft - + Creation Creation - + Annotation 注釈 - + Modification Modification @@ -6106,12 +6106,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools Rebar tools - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Create various types of rebars, including U-shaped, L-shaped, and stirrup @@ -6823,23 +6823,23 @@ Building creation aborted. QObject - - + + Arch Arch - - - - + + + + Draft 喫水 - - - + + + Import-Export インポート/エクスポート diff --git a/src/Mod/Arch/Resources/translations/Arch_ka.ts b/src/Mod/Arch/Resources/translations/Arch_ka.ts index 63a5eb41ac..03f48f4066 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ka.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ka.ts @@ -6017,92 +6017,92 @@ Building creation aborted. Workbench - + Structure tools კონსტრუქციის ხელსაწყოები - + Axis tools ღერძის ხელსაწყოები - + Panel tools პანელის ხელსაწყოები - + Material tools მასალის ხელსაწყოები - + Pipe tools მილის ხელსაწყოები - + Rebar tools არმატურის ხელსაწყოები - + Arch tools არქიტექტურული ხელსაწყოები - + Draft creation tools მონახაზის შექმნის ხელსაწყოები - + Draft annotation tools მონახაზის ანოტაციის ხელსაწყოები - + Draft modification tools მონახაზის მოდიფიკაციის ხელსაწყოები - + Draft snap მონახაზის მიბმა - - + + &Arch &არქიტექტურა - - + + Utilities ხელსაწყოები - - - - + + + + &Draft &მონახაზი - + Creation ქმნილება - + Annotation შენიშვნა - + Modification ჩასწორება @@ -6110,12 +6110,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools არმატურის ხელსაწყოები - + Create various types of rebars, including U-shaped, L-shaped, and stirrup შექმენით სხვადასხვა ტიპის არმატურა, მათ შორის U, L და უზანგის ფორმის @@ -6827,23 +6827,23 @@ Building creation aborted. QObject - - + + Arch არქ - - - - + + + + Draft წყალშიგი - - - + + + Import-Export შეტანა-გატანა diff --git a/src/Mod/Arch/Resources/translations/Arch_ko.ts b/src/Mod/Arch/Resources/translations/Arch_ko.ts index 03145c4c36..a560b859a4 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ko.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ko.ts @@ -6028,92 +6028,92 @@ Building creation aborted. Workbench - + Structure tools Structure tools - + Axis tools Axis tools - + Panel tools Panel tools - + Material tools Material tools - + Pipe tools Pipe tools - + Rebar tools Rebar tools - + Arch tools Arch tools - + Draft creation tools Draft creation tools - + Draft annotation tools Draft annotation tools - + Draft modification tools Draft modification tools - + Draft snap Draft snap - - + + &Arch &Arch - - + + Utilities Utilities - - - - + + + + &Draft &Draft - + Creation Creation - + Annotation Annotation - + Modification Modification @@ -6121,12 +6121,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools Rebar tools - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Create various types of rebars, including U-shaped, L-shaped, and stirrup @@ -6838,23 +6838,23 @@ Building creation aborted. QObject - - + + Arch Arch - - - - + + + + Draft 흘수 - - - + + + Import-Export 가져오기 내보내기 diff --git a/src/Mod/Arch/Resources/translations/Arch_nl.ts b/src/Mod/Arch/Resources/translations/Arch_nl.ts index fe9b0bcdf2..e550887710 100644 --- a/src/Mod/Arch/Resources/translations/Arch_nl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_nl.ts @@ -6022,92 +6022,92 @@ Building creation aborted. Workbench - + Structure tools Structure tools - + Axis tools Axis tools - + Panel tools Panel tools - + Material tools Material tools - + Pipe tools Pipe tools - + Rebar tools Rebar tools - + Arch tools Arch tools - + Draft creation tools Draft creation tools - + Draft annotation tools Draft annotation tools - + Draft modification tools Draft modification tools - + Draft snap Draft snap - - + + &Arch &Arch - - + + Utilities Hulpmiddelen - - - - + + + + &Draft &Draft - + Creation Creatie - + Annotation Aantekening - + Modification Wijziging @@ -6115,12 +6115,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools Rebar tools - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Create various types of rebars, including U-shaped, L-shaped, and stirrup @@ -6832,23 +6832,23 @@ Building creation aborted. QObject - - + + Arch Boog - - - - + + + + Draft Schets - - - + + + Import-Export Importeren-Exporteren diff --git a/src/Mod/Arch/Resources/translations/Arch_pl.qm b/src/Mod/Arch/Resources/translations/Arch_pl.qm index f16cac819b..1b5787e2d4 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_pl.qm and b/src/Mod/Arch/Resources/translations/Arch_pl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_pl.ts b/src/Mod/Arch/Resources/translations/Arch_pl.ts index b7bccd63d5..6f3728a367 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pl.ts @@ -3478,7 +3478,7 @@ Tworzenie piętra zostało przerwane. Rotates the plane along the X axis - Obróć płaszczyznę wokół osi X + Obraca płaszczyznę wokół osi X @@ -3488,7 +3488,7 @@ Tworzenie piętra zostało przerwane. Rotates the plane along the Y axis - Obróć płaszczyznę wokół osi Y + Obraca płaszczyznę wokół osi Y @@ -3498,7 +3498,7 @@ Tworzenie piętra zostało przerwane. Rotates the plane along the Z axis - Obróć płaszczyznę wokół osi Z + Obraca płaszczyznę wokół osi Z @@ -3785,7 +3785,7 @@ Tworzenie budynku zostało przerwane. Mesh to Shape - Siatka do kształtu + Kształt z siatki @@ -5227,7 +5227,7 @@ Tworzenie budynku zostało przerwane. Turns the display of the margin on/off - Przełącza wyświetlanie marginesu, włącz / wyłącz + Włącza / wyłącza wyświetlanie marginesu @@ -6038,92 +6038,92 @@ Tworzenie budynku zostało przerwane. Workbench - + Structure tools Narzędzia konstrukcyjne - + Axis tools Narzędzia osi - + Panel tools Narzędzia panelu - + Material tools Narzędzia materiałowe - + Pipe tools Narzędzia rur - + Rebar tools Narzędzia zbrojenia - + Arch tools Narzędzia architektoniczne - + Draft creation tools Rysunek Roboczy — kreślenie - + Draft annotation tools Rysunek Roboczy — opisy - + Draft modification tools Rysunek Roboczy — narzędzia modyfikujące - + Draft snap Rysunek Roboczy — przyciąganie - - + + &Arch &Architektura - - + + Utilities &Narzędzia - - - - + + + + &Draft &Rysunek - + Creation Tworzenie - + Annotation Adnotacja - + Modification Zmiany @@ -6131,12 +6131,12 @@ Tworzenie budynku zostało przerwane. Arch_RebarTools - + Rebar tools Narzędzia zbrojenia - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Tworzy różne rodzaje prętów zbrojeniowych, w tym pręty w kształcie U, L i strzemiona @@ -6697,7 +6697,7 @@ Tworzenie budynku zostało przerwane. Mesh to Shape - Siatka do kształtu + Kształt z siatki @@ -6848,23 +6848,23 @@ Tworzenie budynku zostało przerwane. QObject - - + + Arch Architektura - - - - + + + + Draft Rysunek roboczy - - - + + + Import-Export Import-Eksport diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm b/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm index f1532c9d88..7cc1efdad2 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm and b/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts b/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts index 7606d09714..64716bee06 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts @@ -1727,7 +1727,7 @@ No entanto, alguns aplicativos BIM usarão este fator para escolher com qual uni Beam - raio + Viga @@ -6000,92 +6000,92 @@ Building creation aborted. Workbench - + Structure tools Structure tools - + Axis tools Axis tools - + Panel tools Panel tools - + Material tools Material tools - + Pipe tools Pipe tools - + Rebar tools Rebar tools - + Arch tools Arch tools - + Draft creation tools Ferramentas de criação de esboço - + Draft annotation tools Ferramentas de anotação de esboço - + Draft modification tools Ferramentas de modificação de esboço - + Draft snap Referências a objetos de esboço - - + + &Arch &Arch - - + + Utilities Utilitários - - - - + + + + &Draft &Draft - + Creation Creation - + Annotation Anotação - + Modification Modification @@ -6093,12 +6093,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools Rebar tools - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Create various types of rebars, including U-shaped, L-shaped, and stirrup @@ -6810,23 +6810,23 @@ Building creation aborted. QObject - - + + Arch Arquitetura - - - - + + + + Draft Projeto - - - + + + Import-Export Importação e exportação diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts b/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts index 5c581f294d..48ba2a3c51 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts @@ -6020,92 +6020,92 @@ Building creation aborted. Workbench - + Structure tools Structure tools - + Axis tools Axis tools - + Panel tools Panel tools - + Material tools Material tools - + Pipe tools Pipe tools - + Rebar tools Rebar tools - + Arch tools Arch tools - + Draft creation tools Draft creation tools - + Draft annotation tools Draft annotation tools - + Draft modification tools Draft modification tools - + Draft snap Draft snap - - + + &Arch &Arch - - + + Utilities Utilitários - - - - + + + + &Draft &Draft - + Creation Creation - + Annotation Anotação - + Modification Modification @@ -6113,12 +6113,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools Rebar tools - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Create various types of rebars, including U-shaped, L-shaped, and stirrup @@ -6830,23 +6830,23 @@ Building creation aborted. QObject - - + + Arch Arquitetura - - - - + + + + Draft Calado do Navio - - - + + + Import-Export Importar/Exportar diff --git a/src/Mod/Arch/Resources/translations/Arch_ro.ts b/src/Mod/Arch/Resources/translations/Arch_ro.ts index 955c615189..8298032703 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ro.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ro.ts @@ -6027,92 +6027,92 @@ Crearea de construcții a fost întreruptă. Workbench - + Structure tools Unelte de structură - + Axis tools Unelte axă - + Panel tools Instrumente panou - + Material tools Instrumente materiale - + Pipe tools Unelte țeavă - + Rebar tools Instrumente de retrogradare - + Arch tools Unelte Arch - + Draft creation tools Draft creation tools - + Draft annotation tools Draft annotation tools - + Draft modification tools Draft modification tools - + Draft snap Draft snap - - + + &Arch &Arc - - + + Utilities Utilități - - - - + + + + &Draft &Schiță - + Creation Creare - + Annotation Notatie - + Modification Modificare @@ -6120,12 +6120,12 @@ Crearea de construcții a fost întreruptă. Arch_RebarTools - + Rebar tools Instrumente de retrogradare - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Crează diferite tipuri de bare, inclusiv versiuni U, în formă de L și stirrup @@ -6837,23 +6837,23 @@ Crearea de construcții a fost întreruptă. QObject - - + + Arch Arhi - - - - + + + + Draft Pescaj - - - + + + Import-Export Import/Export diff --git a/src/Mod/Arch/Resources/translations/Arch_ru.ts b/src/Mod/Arch/Resources/translations/Arch_ru.ts index 16c91925a9..8655a75a81 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ru.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ru.ts @@ -6006,92 +6006,92 @@ Building creation aborted. Workbench - + Structure tools Инструменты конструкции - + Axis tools Инстументы осей - + Panel tools Инструменты панели - + Material tools Инструменты материала - + Pipe tools Инструменты трубы - + Rebar tools Инструменты для арматуры - + Arch tools Архитектурные инструменты - + Draft creation tools Инструменты создания чертежа - + Draft annotation tools Инструменты заметок для эскиза - + Draft modification tools Инструменты модификации черновика - + Draft snap Привязка чертежа - - + + &Arch &Архитектурный - - + + Utilities Вспомогательные - - - - + + + + &Draft &Черчение - + Creation Создание - + Annotation Заметка - + Modification Модификация @@ -6099,12 +6099,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools Инструменты для арматуры - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Создавайте различные типы арматуры, в том числе U-образные, L-образные и хомуты @@ -6816,23 +6816,23 @@ Building creation aborted. QObject - - + + Arch Архитектурный - - - - + + + + Draft Осадка - - - + + + Import-Export Импорт/экспорт diff --git a/src/Mod/Arch/Resources/translations/Arch_sl.qm b/src/Mod/Arch/Resources/translations/Arch_sl.qm index c26f3d8d96..5da93882aa 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sl.qm and b/src/Mod/Arch/Resources/translations/Arch_sl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sl.ts b/src/Mod/Arch/Resources/translations/Arch_sl.ts index ed25e3bbe1..fc19e2c638 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sl.ts @@ -193,7 +193,7 @@ Schedule definition - Določilo sporeda + Določilo popisa @@ -279,7 +279,7 @@ Pustite prazno, če želite uporabiti vse predmete v dokumentu If this is enabled, the schedule and the associated spreadsheet are updated whenever the document is recomputed. - Če je to omogočeno, se razpored in povezana preglednica posodobita vsakič, ko se dokument preračuna. + Če je to omogočeno, se popis in povezana preglednica posodobita vsakič, ko se dokument preračuna. @@ -3143,7 +3143,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela added property 'Schedule' - dodana lastnost "Razpored" + dodana lastnost "Popis" @@ -3201,7 +3201,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Schedule - Razpored + Popis @@ -5459,12 +5459,12 @@ Ustvarjanj stavbe prekinjeno. If True, the schedule and the associated spreadsheet are updated whenever the document is recomputed - Če drži, se razpored in povezana preglednica posodobita vsakič, ko se dokument preračuna + Če drži, se popis in povezana preglednica posodobita vsakič, ko se dokument preračuna The Arch Schedule that uses this spreadsheet - The Arch Schedule that uses this spreadsheet + Arh-popis, ki uporablja to preglednico @@ -5575,210 +5575,210 @@ Ustvarjanj stavbe prekinjeno. An optional standard (OmniClass, etc...) code for this component - An optional standard (OmniClass, etc...) code for this component + Izbirna standardne kode (OmniClass, ...) te sestavine A material for this object - A material for this object + Snov tega predmeta Specifies if moving this object moves its base instead - Specifies if moving this object moves its base instead + Določa, če se s premikanjem tega predmeta v resnici premakne njegova podloga Specifies if this object must move together when its host is moved - Specifies if this object must move together when its host is moved + Določa, ali naj se predmet premakne skupaj z gostiteljem The area of all vertical faces of this object - The area of all vertical faces of this object + Površina vseh navpičnih ploskev tega predmeta The perimeter length of the horizontal area - The perimeter length of the horizontal area + Obseg vodoravnega območja An optional higher-resolution mesh or shape for this object - An optional higher-resolution mesh or shape for this object + Možnost višje ločljivosti ploskovja ali oblike tega predmeta An optional axis or axis system on which this object should be duplicated - An optional axis or axis system on which this object should be duplicated + Možnost izbire osi ali sestava osi, po katerih bo ta predmet namnožen Use the material color as this object's shape color, if available - Use the material color as this object's shape color, if available + Če je na voljo, uporabi barvo snovi tega predmeta za barvo oblike The diameter of the bar - The diameter of the bar + Premer palice The distance between the border of the beam and the first bar (concrete cover). - The distance between the border of the beam and the first bar (concrete cover). + Razdalja med robom nosilca in prvo palico (zaščitna betonska plast). The distance between the border of the beam and the last bar (concrete cover). - The distance between the border of the beam and the last bar (concrete cover). + Razdalja med robom nosilca in zadnjo palico (zaščitna betonska plast). The amount of bars - The amount of bars + Število palic The spacing between the bars - The spacing between the bars + Razmak med palicami The total distance to span the rebars over. Keep 0 to automatically use the host shape size. - The total distance to span the rebars over. Keep 0 to automatically use the host shape size. + Celotna dolžina razpona armaturnih palic. Pustite 0 za samodejno upoštevanje dolžine gostitelja. The direction to use to spread the bars. Keep (0,0,0) for automatic direction. - The direction to use to spread the bars. Keep (0,0,0) for automatic direction. + Smer razporejanja palic. Pusti (0,0,0) za samodejno smer. The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. - The fillet to apply to the angle of the base profile. This value is multiplied by the bar diameter. + Zaokorožitev na pregibu, ki bo uporabljena na izhodiščnem prerezu. Vrednost se pomnoži s premerom palice. List of placement of all the bars - List of placement of all the bars + Seznam postavitev vseh palic The structure object that hosts this rebar - The structure object that hosts this rebar + Nosilni predmet, ki vsebuje to armaturo The custom spacing of rebar - The custom spacing of rebar + Ročna nastavitev razmika betonskega jekla Length of a single rebar - Length of a single rebar + Dolžina posamezne palice Total length of all rebars - Total length of all rebars + Skupna dolžina betonskih jekel The rebar mark - The rebar mark + Oznaka armaturne palice Shape of rebar - Shape of rebar + Oblika armature The objects that must be considered by this section plane. Empty means the whole document. - The objects that must be considered by this section plane. Empty means the whole document. + Predmeti, ki morajo biti v tej prerezni ravnini zajeti. Prazno pomeni celoten dokument. If false, non-solids will be cut too, with possible wrong results. - If false, non-solids will be cut too, with possible wrong results. + Če je napak, bodo prerezani tudi netelesni predmeti z možnostjo napačnih izidov. If True, resulting views will be clipped to the section plane area. - If True, resulting views will be clipped to the section plane area. + Če drži, bodo dobljeni pogledi zamejeni s površino prerezne ravnine. If true, the color of the objects material will be used to fill cut areas. - If true, the color of the objects material will be used to fill cut areas. + Če drži, bo za zapolnitev prerezanih ploskev uporabljena barva predmetove snovi. Geometry further than this value will be cut off. Keep zero for unlimited. - Geometry further than this value will be cut off. Keep zero for unlimited. + Geometrija izven te vrednosti bo porezana. Za neomejenost pustite vrednost nič. The display length of this section plane - The display length of this section plane + Dolžina prikaza te prerezne ravnine The display height of this section plane - The display height of this section plane + Višina prikaza te prerezne ravnine The size of the arrows of this section plane - The size of the arrows of this section plane + Velikost puščic te prerezne ravnine The transparency of this object - The transparency of this object + Prozornost tega predmeta Show the cut in the 3D view - Show the cut in the 3D view + Prikaži prerez v 3D-pogledu The color of this object - The color of this object + Barva tega predmeta The distance between the cut plane and the actual view cut (keep this a very small value but not zero) - The distance between the cut plane and the actual view cut (keep this a very small value but not zero) + Razdalja med rezalno ravnino in ravnino vidnega polja (razdalja naj bo majhna, vendar ne nič) Show the label in the 3D view - Show the label in the 3D view + Prikaži oznako v 3D-pogledu The name of the font - The name of the font + Naziv pisave The size of the text font - The size of the text font + Velikost pisave besedila The objects that make the boundaries of this space object - The objects that make the boundaries of this space object + Predmeti, ki zamejujejo ta prostor The computed floor area of this space - The computed floor area of this space + Izračunana talna površinatega prostora @@ -5838,102 +5838,102 @@ Ustvarjanj stavbe prekinjeno. Specifies if this space is internal or external - Specifies if this space is internal or external + Določa, ali je prostor notranji ali zunanji The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data + Besedilo za prikaz. Za vstavitev ustreznih podatkov uporabite $area, $label, $tag, $floor, $walls, $ceiling The color of the area text - The color of the area text + Barva besedila površine The size of the first line of text - The size of the first line of text + Velikost prve vrstice besedila The space between the lines of text - The space between the lines of text + Razmik med vrsticami besedila The position of the text. Leave (0,0,0) for automatic position - The position of the text. Leave (0,0,0) for automatic position + Položaj besedila. Pustite (0,0,0) za samodejni položaj The justification of the text - The justification of the text + Poravnava besedila The number of decimals to use for calculated texts - The number of decimals to use for calculated texts + Število decimalk, ki naj se jih uporabi za besedila izračunov Show the unit suffix - Show the unit suffix + Prikaži pripono enote The length of this wall. Not used if this wall is based on an underlying object - The length of this wall. Not used if this wall is based on an underlying object + Dolžina zidu. Ni upoštevana v primeru, ko je zid osnovan na podloženem predmetu The width of this wall. Not used if this wall is based on a face - The width of this wall. Not used if this wall is based on a face + Širina tega zidu. Ni upoštevana v primeru, ko je zid na osnovi ploskve This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) - This overrides Width attribute to set width of each segment of wall. Ignored if Base object provides Widths information, with getWidths() method. (The 1st value override 'Width' attribute for 1st segment of wall; if a value is zero, 1st value of 'OverrideWidth' will be followed) + To povozi značilko širine z nastavitvijo širine vsakega posameznega odseka stene. Prezre se, če so podatki pridobljeni že iz izhodiščnega predmeta s postopkom getWidths(). (1. vrednost povozi značilko "Širina" prvega odseka stene; če je vrednost enaka nič, sledi prva naslednja vednost iz "OverrideWidth") This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) - This overrides Align attribute to set Align of each segment of wall. Ignored if Base object provides Aligns information, with getAligns() method. (The 1st value override 'Align' attribute for 1st segment of wall; if a value is not 'Left, Right, Center', 1st value of 'OverrideAlign' will be followed) + To povozi značilko poravnave z nastavitvijo poravnave vsakega posameznega odseka stene. Prezre se, če so podatki o poravnavi pridobljeni že iz izhodiščnega predmeta s postopkom getAligns(). (1. vrednost povozi značilko "Poravnava" prvega odseka stene; če vrednost ni "Levo, Desno, Sredinsko", sledi prva vednost iz "OverrideAlign") The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid - The height of this wall. Keep 0 for automatic. Not used if this wall is based on a solid + Višina zidu. Pustite 0 za samodejno. Ni upoštevana v primeru, ko je zid izhaja iz telesa The area of this wall as a simple Height * Length calculation - The area of this wall as a simple Height * Length calculation + Površina te stene kot enostaven zmnožek višine in dolžine The alignment of this wall on its base object, if applicable - The alignment of this wall on its base object, if applicable + Poravnava zidu glede na izhodiščni predmet, ko je to možno The face number of the base object used to build this wall - The face number of the base object used to build this wall + Število ploskev osnovnega predmeta, ki so uporabljene za izgradnjo stene The offset between this wall and its baseline (only for left and right alignments) - The offset between this wall and its baseline (only for left and right alignments) + Odmik med to steno in njeno osnovnico (le za poravnave levo in desno) Enable this to make the wall generate blocks - Enable this to make the wall generate blocks + Omogočite, če želite, da se s steno izrišejo zidaki The length of each block - The length of each block + Dolžina posameznega zidaka @@ -6025,92 +6025,92 @@ Ustvarjanj stavbe prekinjeno. Workbench - + Structure tools Structure tools - + Axis tools Axis tools - + Panel tools Panel tools - + Material tools Material tools - + Pipe tools Pipe tools - + Rebar tools Rebar tools - + Arch tools Arch tools - + Draft creation tools Orodja za izdelavo izrisa - + Draft annotation tools Orodja za opisovanje izrisov - + Draft modification tools Orodja za preoblikovanje izrisov - + Draft snap Pripenjanje pri izrisovanju - - + + &Arch &Arch - - + + Utilities Pripomočki - - - - + + + + &Draft &Draft - + Creation Creation - + Annotation Opis - + Modification Modification @@ -6118,12 +6118,12 @@ Ustvarjanj stavbe prekinjeno. Arch_RebarTools - + Rebar tools Rebar tools - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Create various types of rebars, including U-shaped, L-shaped, and stirrup @@ -6355,7 +6355,7 @@ Ustvarjanj stavbe prekinjeno. Creates a customizable grid object - Creates a customizable grid object + Ustvari nastavljivo mrežo @@ -6532,7 +6532,7 @@ Ustvarjanj stavbe prekinjeno. Schedule - Razpored + Popis @@ -6835,23 +6835,23 @@ Ustvarjanj stavbe prekinjeno. QObject - - + + Arch Lok - - - - + + + + Draft Ugrez - - - + + + Import-Export Uvoz - Izvoz diff --git a/src/Mod/Arch/Resources/translations/Arch_sr-CS.ts b/src/Mod/Arch/Resources/translations/Arch_sr-CS.ts index c12ac07cb0..059ba8ffd6 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sr-CS.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sr-CS.ts @@ -6028,92 +6028,92 @@ Building creation aborted. Workbench - + Structure tools Structure tools - + Axis tools Axis tools - + Panel tools Panel tools - + Material tools Material tools - + Pipe tools Pipe tools - + Rebar tools Rebar tools - + Arch tools Arch tools - + Draft creation tools Draft alatke za pravljenje - + Draft annotation tools Draft alatke za napomene - + Draft modification tools Draft alatke za izmene - + Draft snap Draft hvatanje - - + + &Arch &Arch - - + + Utilities Korisni alati - - - - + + + + &Draft &Draft - + Creation Creation - + Annotation Napomena - + Modification Modification @@ -6121,12 +6121,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools Rebar tools - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Create various types of rebars, including U-shaped, L-shaped, and stirrup @@ -6838,23 +6838,23 @@ Building creation aborted. QObject - - + + Arch Luk - - - - + + + + Draft Zakošenje - - - + + + Import-Export Uvoz/Izvoz diff --git a/src/Mod/Arch/Resources/translations/Arch_sr.ts b/src/Mod/Arch/Resources/translations/Arch_sr.ts index 4c0ac74ed5..3366d3705a 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sr.ts @@ -6028,92 +6028,92 @@ Building creation aborted. Workbench - + Structure tools Structure tools - + Axis tools Axis tools - + Panel tools Panel tools - + Material tools Material tools - + Pipe tools Pipe tools - + Rebar tools Rebar tools - + Arch tools Arch tools - + Draft creation tools Draft алатке за прављење - + Draft annotation tools Draft алатке за напомене - + Draft modification tools Draft алатке за измене - + Draft snap Draft хватање - - + + &Arch &Arch - - + + Utilities Корисни алати - - - - + + + + &Draft &Draft - + Creation Creation - + Annotation Напомена - + Modification Modification @@ -6121,12 +6121,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools Rebar tools - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Create various types of rebars, including U-shaped, L-shaped, and stirrup @@ -6838,23 +6838,23 @@ Building creation aborted. QObject - - + + Arch Лук - - - - + + + + Draft Закошење - - - + + + Import-Export Увоз/извоз diff --git a/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm b/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm index 16c3618893..ae89be2ce3 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm and b/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts b/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts index 25f903f507..082f3cc701 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts @@ -203,7 +203,7 @@ Unnamed schedule - Unnamed schedule + Schema utan namn @@ -299,7 +299,7 @@ Lämna tomt för att använda alla objekt från dokumentet Deletes the selected line - Deletes the selected line + Tar bort den valda raden @@ -442,12 +442,12 @@ Lämna tomt för att använda alla objekt från dokumentet List of files to be committed: - List of files to be committed: + Lista över filer som ska lämnas in: Diff - Diff + Diff @@ -463,7 +463,7 @@ Lämna tomt för att använda alla objekt från dokumentet Commit message - Commit message + Incheckningsmeddelande @@ -1156,7 +1156,7 @@ if you start getting crashes when you set multiple cores. Number of cores to use (experimental) - Number of cores to use (experimental) + Antalet kärnor att använda (experimentiellt) @@ -1194,7 +1194,7 @@ if you start getting crashes when you set multiple cores. One compound per floor - One compound per floor + Ett sammansatt element per våning @@ -1209,7 +1209,7 @@ if you start getting crashes when you set multiple cores. One compound for all - One compound for all + Ett sammansatt element för alla @@ -1302,7 +1302,7 @@ they will be treated as one. Allow invalid shapes - Allow invalid shapes + Tillåt ogiltiga former @@ -1522,17 +1522,17 @@ The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. Standard model - Standard model + Standardmodell Structural analysis - Structural analysis + Strukturell analys Standard + structural - Standard + structural + Standard + strukturell @@ -1853,19 +1853,19 @@ unit to work with when opening the file. Switch L/H - Switch L/H + Byt L/H Switch L/W - Switch L/W + Byt L/W Con&tinue - Con&tinue + For&tsättning @@ -1892,17 +1892,17 @@ unit to work with when opening the file. Reset nodes - Reset nodes + Återställ noder Edit nodes - Edit nodes + Redigera noder Extend nodes - Extend nodes + Förläng noder @@ -1912,7 +1912,7 @@ unit to work with when opening the file. Connect nodes - Connect nodes + Anslut noder @@ -1938,7 +1938,7 @@ unit to work with when opening the file. Select tool... - Select tool... + Välj verktyg... @@ -1979,7 +1979,7 @@ unit to work with when opening the file. Intersection found. - Intersection found. + Gatukorsning hittades. @@ -2011,7 +2011,7 @@ unit to work with when opening the file. Create Equipment - Create Equipment + Skapa utrustning @@ -2031,7 +2031,7 @@ unit to work with when opening the file. This operation can take a long time. Proceed? - This operation can take a long time. Proceed? + Den här åtgärden kan ta lång tid. Fortsätt? @@ -2041,7 +2041,7 @@ unit to work with when opening the file. Create 3 views - Create 3 views + Skapa 3 vyer @@ -2052,12 +2052,12 @@ unit to work with when opening the file. Floor - Floor + Våning Create BuildingPart - Create BuildingPart + Skapa byggnadsdel @@ -2103,17 +2103,17 @@ unit to work with when opening the file. Create profile - Create profile + Skapa profil Profile settings - Profile settings + Inställningar för profilen Create Profile - Create Profile + Skapa profil @@ -2154,7 +2154,7 @@ Site creation aborted. Create Site - Create Site + Skapa sida @@ -2289,7 +2289,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Open reference - Open reference + Öppna referens @@ -2299,12 +2299,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Frame - Frame + Ram Create Frame - Create Frame + Skapa ram @@ -2324,7 +2324,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela No shape found in this file - No shape found in this file + Ingen form hittades i den här filen @@ -2339,7 +2339,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Error: Unable to download from: - Error: Unable to download from: + Fel: Kunde inte hämta från: @@ -2371,7 +2371,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Window - Create Window + Skapa fönster @@ -2396,7 +2396,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Window options - Window options + Fönsteralternativ @@ -2411,7 +2411,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela This window has no defined opening - This window has no defined opening + Det här fönstret har ingen definierad öppning @@ -2423,12 +2423,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Unable to create component - Unable to create component + Kunde inte skapa komponent Window elements - Window elements + Fönsterelement @@ -2483,7 +2483,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create/update component - Create/update component + Skapa/uppdatera komponent @@ -2494,7 +2494,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Wires - Wires + Trådar @@ -2505,7 +2505,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create new component - Create new component + Skapa ny komponent @@ -2549,7 +2549,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela + default - + default + + standard @@ -2726,7 +2726,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela New layer - New layer + Nytt lager @@ -2736,7 +2736,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela depends on the object - depends on the object + beror på objektet @@ -2747,42 +2747,42 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Error: Space '%s' has no Zone. Aborting. - Error: Space '%s' has no Zone. Aborting. + Fel: Utrymmet '%s' har ingen Zon. Avbryter. pycollada not found, collada support is disabled. - pycollada not found, collada support is disabled. + pycollada hittades inte, stödet för collada är inaktiverat. file %s successfully created. - file %s successfully created. + skapandet av filen %s lyckades. Create Grid - Create Grid + Skapa rutnät Auto height is larger than height - Auto height is larger than height + Automatisk höjd är större än höjd Total row size is larger than height - Total row size is larger than height + Total radstorlek är större än höjd Auto width is larger than width - Auto width is larger than width + Automatisk bredd är större än bredd Total column size is larger than width - Total column size is larger than width + Total kolumnstorlek är större än bredd @@ -2793,12 +2793,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Total width - Total width + Bredd totalt Total height - Total height + Höjd totalt @@ -2813,32 +2813,32 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Add col - Add col + Lägg till col Del col - Del col + Ta bort col Create span - Create span + Skapa spann Remove span - Remove span + Ta bort spann Rows - Rows + Rader Columns - Columns + Kolumner @@ -2858,17 +2858,17 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Dent length - Dent length + Bulans längd Dent width - Dent width + Bulans bredd Dent height - Dent height + Bulans höjd @@ -2878,22 +2878,22 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Number of holes - Number of holes + Antalet hål Major diameter of holes - Major diameter of holes + Största diameter för hålen Minor diameter of holes - Minor diameter of holes + Minsta diameter för hålen Spacing between holes - Spacing between holes + Avstånd mellan hålen @@ -2933,7 +2933,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Depth of treads - Depth of treads + Trådarnas djup @@ -2948,12 +2948,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Add dent - Add dent + Lägg till bula Remove dent - Remove dent + Ta bort bula @@ -2963,7 +2963,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Level - Level + Nivå @@ -2989,12 +2989,12 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Panel - Create Panel + Skapa panel Panel options - Panel options + Panelalternativ @@ -3231,17 +3231,17 @@ Floor creation aborted. Create Floor - Create Floor + Skapa våning Create Axis - Create Axis + Skapa vinklar Distances (mm) and angles (deg) between axes - Distances (mm) and angles (deg) between axes + Avstånd (mm) och vinklar (deg) mellan a symmetriaxlar @@ -3267,17 +3267,17 @@ Floor creation aborted. Found a shape containing curves, triangulating - Found a shape containing curves, triangulating + Hittade en form som innehåller kurvor, triangulerar Successfully imported - Successfully imported + Importen lyckades Error computing the shape of this object - Error computing the shape of this object + Fel uppstod vid beräkning av objektets form @@ -3287,7 +3287,7 @@ Floor creation aborted. has an invalid shape - has an invalid shape + har en ogiltig form @@ -3315,12 +3315,12 @@ Floor creation aborted. Component - Component + Komponent Components of this object - Components of this object + Komponenter för det här objektet @@ -3330,12 +3330,12 @@ Floor creation aborted. Additions - Additions + Extra Subtractions - Subtractions + Subtraktioner @@ -3360,12 +3360,12 @@ Floor creation aborted. Edit IFC properties - Edit IFC properties + Redigera IFC-egenskaper Edit standard code - Edit standard code + Redigera standardkod @@ -3375,7 +3375,7 @@ Floor creation aborted. Add property... - Add property... + Lägg till egenskap... @@ -3390,7 +3390,7 @@ Floor creation aborted. New property - New property + Ny egenskap @@ -3491,7 +3491,7 @@ Floor creation aborted. Resize - Resize + Storleksförändra @@ -3544,7 +3544,7 @@ Building creation aborted. Create Building - Create Building + Skapa byggnad @@ -3554,7 +3554,7 @@ Building creation aborted. Create Space - Create Space + Skapa utrymme @@ -3569,7 +3569,7 @@ Building creation aborted. Wall - Wall + Vägg @@ -3581,7 +3581,7 @@ Building creation aborted. Create Wall - Create Wall + Skapa vägg @@ -6026,92 +6026,92 @@ Building creation aborted. Workbench - + Structure tools Structure tools - + Axis tools Axis tools - + Panel tools Panel tools - + Material tools Material tools - + Pipe tools Pipe tools - + Rebar tools Rebar tools - + Arch tools Arch tools - + Draft creation tools Draft creation tools - + Draft annotation tools Draft annotation tools - + Draft modification tools Draft modification tools - + Draft snap Draft snap - - + + &Arch &Arch - - + + Utilities Verktyg - - - - + + + + &Draft &Draft - + Creation Creation - + Annotation Annotering - + Modification Modification @@ -6119,12 +6119,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools Rebar tools - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Create various types of rebars, including U-shaped, L-shaped, and stirrup @@ -6212,7 +6212,7 @@ Building creation aborted. Frame - Frame + Ram @@ -6546,7 +6546,7 @@ Building creation aborted. Level - Level + Nivå @@ -6620,7 +6620,7 @@ Building creation aborted. Wall - Wall + Vägg @@ -6776,7 +6776,7 @@ Building creation aborted. Component - Component + Komponent @@ -6836,23 +6836,23 @@ Building creation aborted. QObject - - + + Arch Båge - - - - + + + + Draft Djupgående - - - + + + Import-Export Importera/Exportera diff --git a/src/Mod/Arch/Resources/translations/Arch_tr.qm b/src/Mod/Arch/Resources/translations/Arch_tr.qm index 1f57e38681..01631ffb2f 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_tr.qm and b/src/Mod/Arch/Resources/translations/Arch_tr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_tr.ts b/src/Mod/Arch/Resources/translations/Arch_tr.ts index f04464a7e5..fc93fe6c7f 100644 --- a/src/Mod/Arch/Resources/translations/Arch_tr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_tr.ts @@ -1936,7 +1936,7 @@ Ancak bazı BIM uygulamaları dosya açılırken seçilen faktörü uygular. Select tool... - Select tool... + Seçim aracı... @@ -6024,92 +6024,92 @@ Building creation aborted. Workbench - + Structure tools Structure tools - + Axis tools Axis tools - + Panel tools Panel tools - + Material tools Material tools - + Pipe tools Pipe tools - + Rebar tools Rebar tools - + Arch tools Arch tools - + Draft creation tools Draft creation tools - + Draft annotation tools Draft annotation tools - + Draft modification tools Draft modification tools - + Draft snap Draft snap - - + + &Arch &Arch - - + + Utilities Yard. Uygulamalar - - - - + + + + &Draft &Draft - + Creation Creation - + Annotation Not - + Modification Modification @@ -6117,12 +6117,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools Rebar tools - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Create various types of rebars, including U-shaped, L-shaped, and stirrup @@ -6835,23 +6835,23 @@ Building creation aborted. QObject - - + + Arch Mimari - - - - + + + + Draft Taslak - - - + + + Import-Export İçe-Dışa Aktar diff --git a/src/Mod/Arch/Resources/translations/Arch_uk.ts b/src/Mod/Arch/Resources/translations/Arch_uk.ts index b57a4268cc..03adb90294 100644 --- a/src/Mod/Arch/Resources/translations/Arch_uk.ts +++ b/src/Mod/Arch/Resources/translations/Arch_uk.ts @@ -6029,92 +6029,92 @@ Building creation aborted. Workbench - + Structure tools Структурні інструменти - + Axis tools Axis tools - + Panel tools Інструменти панелі - + Material tools Material tools - + Pipe tools Pipe tools - + Rebar tools Rebar tools - + Arch tools Arch tools - + Draft creation tools Draft creation tools - + Draft annotation tools Draft annotation tools - + Draft modification tools Draft modification tools - + Draft snap Draft snap - - + + &Arch &Arch - - + + Utilities Утиліти - - - - + + + + &Draft &Draft - + Creation Створення - + Annotation Анотація - + Modification Зміна @@ -6122,12 +6122,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools Rebar tools - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Create various types of rebars, including U-shaped, L-shaped, and stirrup @@ -6839,23 +6839,23 @@ Building creation aborted. QObject - - + + Arch Арка - - - - + + + + Draft Креслення - - - + + + Import-Export Імпорт-експорт diff --git a/src/Mod/Arch/Resources/translations/Arch_val-ES.ts b/src/Mod/Arch/Resources/translations/Arch_val-ES.ts index 6036f9ad8b..d90108aa80 100644 --- a/src/Mod/Arch/Resources/translations/Arch_val-ES.ts +++ b/src/Mod/Arch/Resources/translations/Arch_val-ES.ts @@ -5997,92 +5997,92 @@ Building creation aborted. Workbench - + Structure tools Structure tools - + Axis tools Axis tools - + Panel tools Panel tools - + Material tools Material tools - + Pipe tools Pipe tools - + Rebar tools Rebar tools - + Arch tools Arch tools - + Draft creation tools Draft creation tools - + Draft annotation tools Draft annotation tools - + Draft modification tools Draft modification tools - + Draft snap Draft snap - - + + &Arch &Arch - - + + Utilities Utilitats - - - - + + + + &Draft &Draft - + Creation Creation - + Annotation Anotació - + Modification Modification @@ -6090,12 +6090,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools Rebar tools - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Create various types of rebars, including U-shaped, L-shaped, and stirrup @@ -6807,23 +6807,23 @@ Building creation aborted. QObject - - + + Arch Arquitectura - - - - + + + + Draft Calat - - - + + + Import-Export Importació-exportació diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm b/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm index 6d658aec4c..eaca67b5c8 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm and b/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts b/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts index 9ff1d83803..fc7b7f4772 100644 --- a/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts +++ b/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts @@ -2354,7 +2354,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Create Window - Create Window + 创建新窗口 @@ -2471,7 +2471,7 @@ If Run = 0 then the run is calculated so that the height is the same as the rela Base 2D object - Base 2D object + 基础2D对象 @@ -6009,92 +6009,92 @@ Building creation aborted. Workbench - + Structure tools Structure tools - + Axis tools Axis tools - + Panel tools Panel tools - + Material tools Material tools - + Pipe tools Pipe tools - + Rebar tools Rebar tools - + Arch tools Arch tools - + Draft creation tools Draft creation tools - + Draft annotation tools Draft annotation tools - + Draft modification tools Draft modification tools - + Draft snap Draft snap - - + + &Arch &Arch - - + + Utilities 实用程序 - - - - + + + + &Draft &Draft - + Creation Creation - + Annotation 注释 - + Modification Modification @@ -6102,12 +6102,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools Rebar tools - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Create various types of rebars, including U-shaped, L-shaped, and stirrup @@ -6819,23 +6819,23 @@ Building creation aborted. QObject - - + + Arch 建筑 - - - - + + + + Draft 拔模 - - - + + + Import-Export Import-Export diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm b/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm index 1d6b702b6a..fdd209b10c 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm and b/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts b/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts index 82c2175924..608f6efaee 100644 --- a/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts +++ b/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts @@ -2054,7 +2054,7 @@ unit to work with when opening the file. Floor - Floor + 樓板 @@ -6029,92 +6029,92 @@ Building creation aborted. Workbench - + Structure tools 結構工具 - + Axis tools 軸座標工具 - + Panel tools 面板工具 - + Material tools 材質工具 - + Pipe tools 管道工具 - + Rebar tools 鋼筋結構工具 - + Arch tools 建築工具 - + Draft creation tools 底圖建立工具 - + Draft annotation tools 底圖註釋工具 - + Draft modification tools 底圖編修工具 - + Draft snap Draft snap - - + + &Arch 建築(&A) - - + + Utilities 實用工具 - - - - + + + + &Draft 底圖(&D) - + Creation 建立 - + Annotation 注釋 - + Modification 編修 @@ -6122,12 +6122,12 @@ Building creation aborted. Arch_RebarTools - + Rebar tools 鋼筋結構工具 - + Create various types of rebars, including U-shaped, L-shaped, and stirrup Create various types of rebars, including U-shaped, L-shaped, and stirrup @@ -6839,23 +6839,23 @@ Building creation aborted. QObject - - + + Arch Arch - - - - + + + + Draft 吃水 - - - + + + Import-Export 匯入-匯出 diff --git a/src/Mod/Draft/Resources/translations/Draft.ts b/src/Mod/Draft/Resources/translations/Draft.ts index e7dc84a16a..cc1df3197b 100644 --- a/src/Mod/Draft/Resources/translations/Draft.ts +++ b/src/Mod/Draft/Resources/translations/Draft.ts @@ -3183,43 +3183,43 @@ Not available if Draft preference option 'Use Part Primitives' is enab - - - - - - + + + + + + Converting: - - - + + + Conversion successful - - + + LibreDWG converter not found - - + + ODA converter not found - - + + QCAD converter not found - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3227,7 +3227,7 @@ https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_be.ts b/src/Mod/Draft/Resources/translations/Draft_be.ts index d338684c10..0c11956fe8 100644 --- a/src/Mod/Draft/Resources/translations/Draft_be.ts +++ b/src/Mod/Draft/Resources/translations/Draft_be.ts @@ -3239,43 +3239,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabledАсадка - - - - - - + + + + + + Converting: Пераўтварэнне: - - - + + + Conversion successful Пераўтварэнне прайшло паспяхова - - + + LibreDWG converter not found Сродак пераўтварэння LibreDWG не знойдзены - - + + ODA converter not found Сродак пераўтварэння ODA не знойдзены - - + + QCAD converter not found Сродак пераўтварэння QCADне знойдзены - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3285,7 +3285,7 @@ https://wiki.freecad.org/Import_Export_Preferences Каб атрымаць дадатковую інфармацыі, глядзіце: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_ca.qm b/src/Mod/Draft/Resources/translations/Draft_ca.qm index 89cbdbecf3..c63cb28b16 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ca.qm and b/src/Mod/Draft/Resources/translations/Draft_ca.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ca.ts b/src/Mod/Draft/Resources/translations/Draft_ca.ts index ed16c3d6e7..dfe92275ac 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ca.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ca.ts @@ -3211,43 +3211,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCalat - - - - - - + + + + + + Converting: Convertint: - - - + + + Conversion successful Conversió exitosa - - + + LibreDWG converter not found No s'ha trobat el convertidor LibreDWG - - + + ODA converter not found No s'ha trobat el convertidor ODA - - + + QCAD converter not found No s'ha trobat el convertidor QCAD - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3257,7 +3257,7 @@ Per favor, estableixi un manualment al menú Editar -> Preferències -> Im Per més informació veure: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. @@ -3856,7 +3856,7 @@ L'angle final serà l'angle de base més aquesta quantitat. Select group - Select group + Selecciona grup @@ -3901,7 +3901,7 @@ L'angle final serà l'angle de base més aquesta quantitat. Flip dimension - Flip dimension + Inverteix dimensió @@ -4052,7 +4052,7 @@ L'angle final serà l'angle de base més aquesta quantitat. Add point - Add point + Afegeix punt @@ -4242,7 +4242,7 @@ L'angle final serà l'angle de base més aquesta quantitat. Layer - Layer + Capa @@ -4252,7 +4252,7 @@ L'angle final serà l'angle de base més aquesta quantitat. Point array - Point array + Matriu de punts @@ -4330,7 +4330,7 @@ L'angle final serà l'angle de base més aquesta quantitat. Stretch - Stretch + Estira @@ -4350,18 +4350,18 @@ L'angle final serà l'angle de base més aquesta quantitat. Pick start point of mirror line - Pick start point of mirror line + Escull el punt inicial de la línia de simetria Mirror - Mirror + Simetria Pick end point of mirror line - Pick end point of mirror line + Escull el punt final de la línia de simetria @@ -4371,12 +4371,12 @@ L'angle final serà l'angle de base més aquesta quantitat. Select an object to clone - Select an object to clone + Selecciona un objecte per clonar Change slope - Change slope + Canvia el pendent @@ -4392,27 +4392,27 @@ L'angle final serà l'angle de base més aquesta quantitat. Select an object to offset - Select an object to offset + Selecciona un objecte per fer l'equidistància Offset only works on one object at a time. - Offset only works on one object at a time. + L'eina d'Equidistància només funciona amb un objecte a la vegada. Cannot offset this object type - Cannot offset this object type + No es pot fer l'Equidistància d'aquest tipus d'objecte Offset of Bezier curves is currently not supported - Offset of Bezier curves is currently not supported + L'Equidistància d'una corba de Bezier no és possible actualment Create 2D view - Create 2D view + Crea una vista 2D @@ -4454,14 +4454,14 @@ L'angle final serà l'angle de base més aquesta quantitat. At least one element must be selected. - At least one element must be selected. + Com a mínim s'ha de seleccionar un element. Selection is not suitable for array. - Selection is not suitable for array. + La selecció no és apta per a una matriu. @@ -4471,12 +4471,12 @@ L'angle final serà l'angle de base més aquesta quantitat. Object: - Object: + Objecte: Number of elements must be at least 2. - Number of elements must be at least 2. + El nombre d'elements ha de ser 2 o més. @@ -4511,25 +4511,25 @@ L'angle final serà l'angle de base més aquesta quantitat. Number of elements: - Number of elements: + Nombre d'elements: Polar angle: - Polar angle: + Angle polar: Center of rotation: - Center of rotation: + Centre de rotació: Aborted: - Aborted: + Avortat: @@ -4543,7 +4543,7 @@ L'angle final serà l'angle de base més aquesta quantitat. Number of elements must be at least 1. - Number of elements must be at least 1. + El nombre d'elements ha de ser almenys 1. @@ -4563,32 +4563,32 @@ L'angle final serà l'angle de base més aquesta quantitat. Number of X elements: - Number of X elements: + Nombre d'elements X: Interval X: - Interval X: + Interval X: Number of Y elements: - Number of Y elements: + Nombre d'elements Y: Interval Y: - Interval Y: + Interval Y: Number of Z elements: - Number of Z elements: + Nombre d'elements Z: Interval Z: - Interval Z: + Interval Z: @@ -4612,47 +4612,47 @@ L'angle final serà l'angle de base més aquesta quantitat. Number of layers must be at least 2. - Number of layers must be at least 2. + El nombre de capes ha de ser 2 o més. Radial distance is zero. Resulting array may not look correct. - Radial distance is zero. Resulting array may not look correct. + La distància radial és zero. La matriu resultant pot no semblar correcta. Radial distance is negative. It is made positive to proceed. - Radial distance is negative. It is made positive to proceed. + La distància radial és negativa. Es converteix a positiva per poder continuar. Tangential distance cannot be zero. - Tangential distance cannot be zero. + La distància tangencial no pot ser zero. Tangential distance is negative. It is made positive to proceed. - Tangential distance is negative. It is made positive to proceed. + La distància tangencial és negativa. Es converteix a positiva per poder continuar. Radial distance: - Radial distance: + Distància radial: Tangential distance: - Tangential distance: + Distància tangencial: Number of circular layers: - Number of circular layers: + Nombre de capes circulars: Symmetry parameter: - Symmetry parameter: + Paràmetre de simetria: @@ -4732,7 +4732,7 @@ L'angle final serà l'angle de base més aquesta quantitat. No shape found - No shape found + No s'ha trobat cap forma @@ -4745,17 +4745,17 @@ L'angle final serà l'angle de base més aquesta quantitat. length: - length: + llargada: Two elements are needed. - Two elements are needed. + Són necessaris dos elements. Radius is too large - Radius is too large + El radi és massa gran @@ -4767,13 +4767,13 @@ L'angle final serà l'angle de base més aquesta quantitat. Removed original objects. - Removed original objects. + Eliminats els objectes originals. Points: - Points: + Punts: @@ -4784,22 +4784,22 @@ L'angle final serà l'angle de base més aquesta quantitat. Placement: - Placement: + Posicionament: Wrong input: incorrect type of placement. - Wrong input: incorrect type of placement. + Entrada incorrecta: tipus de posicionament incorrecte. Wrong input: incorrect type of points. - Wrong input: incorrect type of points. + Entrada incorrecta: tipus de punts incorrecte. Cannot generate shape: - Cannot generate shape: + No es pot generar la forma: @@ -4814,18 +4814,18 @@ L'angle final serà l'angle de base més aquesta quantitat. Create primitive object - Create primitive object + Crea un objecte primitiu Final placement: - Final placement: + Posicionament final: Face: True - Face: True + Cara: Cert @@ -4847,7 +4847,7 @@ L'angle final serà l'angle de base més aquesta quantitat. Wrong input: must be a number. - Wrong input: must be a number. + Entrada incorrecta: ha de ser un nombre. @@ -4866,7 +4866,7 @@ L'angle final serà l'angle de base més aquesta quantitat. Wrong input: must be a vector. - Wrong input: must be a vector. + Entrada incorrecta: ha de ser un vector. @@ -4887,7 +4887,7 @@ L'angle final serà l'angle de base més aquesta quantitat. Wrong input: must be a number or vector. - Wrong input: must be a number or vector. + Entrada incorrecta: ha de ser un nombre o un vector. @@ -4901,7 +4901,7 @@ L'angle final serà l'angle de base més aquesta quantitat. Wrong input: must be an integer number. - Wrong input: must be an integer number. + Entrada incorrecta: ha de ser un nombre enter. @@ -4913,7 +4913,7 @@ L'angle final serà l'angle de base més aquesta quantitat. Orthogonal array 2D - Orthogonal array 2D + Matriu ortogonal en 2D @@ -4923,25 +4923,25 @@ L'angle final serà l'angle de base més aquesta quantitat. Rectangular array 2D - Rectangular array 2D + Matriu rectangular en 2D Wrong input: must be a placement, a vector, or a rotation. - Wrong input: must be a placement, a vector, or a rotation. + Entrada incorrecta: ha de ser un posicionament, un vector o una rotació. Wrong input: object must not be a list. - Wrong input: object must not be a list. + Entrada incorrecta: l'objecte no ha de ser una llista. Wrong input: subelement not in object. - Wrong input: subelement not in object. + Entrada incorrecta: el subelement no està en l'objecte. @@ -4951,7 +4951,7 @@ L'angle final serà l'angle de base més aquesta quantitat. Wrong input: label_type must be one of the following: - Wrong input: label_type must be one of the following: + Entrada incorrecta: label_type ha de ser una de les següents opcions: @@ -4970,7 +4970,7 @@ L'angle final serà l'angle de base més aquesta quantitat. Wrong input: must be a list of at least two vectors. - Wrong input: must be a list of at least two vectors. + Entrada incorrecta: ha de ser una llista de com a mínim dos vectors. @@ -4980,28 +4980,28 @@ L'angle final serà l'angle de base més aquesta quantitat. Wrong input: must be a list of two elements. For example, [object, 'Edge1']. - Wrong input: must be a list of two elements. For example, [object, 'Edge1']. + Entrada incorrecta: ha de ser una llista de dos elements. P. ex. [object, 'Edge1']. Wrong input: object has the wrong type. - Wrong input: object has the wrong type. + Entrada incorrecta: l'objecte té el tipus equivocat. This function is deprecated. Do not use this function directly. - This function is deprecated. Do not use this function directly. + Aquesta funció és obsoleta. No utilitzis aquesta funció directament. Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'. - Use one of 'make_linear_dimension', or 'make_linear_dimension_obj'. + Utilitza 'make_linear_dimension' o bé 'make_linear_dimension_obj'. Wrong input: object doesn't have a 'Shape' to measure. - Wrong input: object doesn't have a 'Shape' to measure. + Entrada incorrecta: l'objecte no té una 'Forma' a mesurar. @@ -5012,18 +5012,18 @@ L'angle final serà l'angle de base més aquesta quantitat. Wrong input: must be an integer. - Wrong input: must be an integer. + Entrada incorrecta: ha de ser un nombre enter. i1: values below 1 are not allowed; will be set to 1. - i1: values below 1 are not allowed; will be set to 1. + i1: els valors menors de 1 no estan permesos; es canviarà per 1. Wrong input: vertex not in object. - Wrong input: vertex not in object. + Entrada incorrecta: el vèrtex no està a l'objecte. @@ -5060,17 +5060,17 @@ L'angle final serà l'angle de base més aquesta quantitat. Wrong input: must be a list with two angles. - Wrong input: must be a list with two angles. + Entrada incorrecta: ha de ser una llista amb dos angles. Wrong input: must be a number or quantity. - Wrong input: must be a number or quantity. + Entrada incorrecta: ha de ser un nombre o quantitat. Layers - Layers + Capes @@ -5094,17 +5094,17 @@ L'angle final serà l'angle de base més aquesta quantitat. Wrong input: must be a number between 0 and 100. - Wrong input: must be a number between 0 and 100. + Entrada incorrecta: ha de ser un nombre entre 0 i 100. Activate this layer - Activate this layer + Activa aquesta capa Select layer contents - Select layer contents + Selecciona el contingut de la capa @@ -5116,12 +5116,12 @@ L'angle final serà l'angle de base més aquesta quantitat. Add new layer - Add new layer + Afegeix una nova capa Relabeling layer: - Relabeling layer: + Reetiquetant la capa: @@ -5150,17 +5150,17 @@ L'angle final serà l'angle de base més aquesta quantitat. Found 1 block: exploding it - Found 1 block: exploding it + Trobat 1 bloc: descomposant-lo Found 1 multi-solids compound: exploding it - Found 1 multi-solids compound: exploding it + Trobat 1 multi-sòlid compost: descomposant-lo Found 1 parametric object: breaking its dependencies - Found 1 parametric object: breaking its dependencies + Trobat un objecte paramètric: trencant les seves dependències @@ -5170,7 +5170,7 @@ L'angle final serà l'angle de base més aquesta quantitat. Found several faces: splitting them - Found several faces: splitting them + Trobades diverses cares: dividint-les @@ -5200,7 +5200,7 @@ L'angle final serà l'angle de base més aquesta quantitat. The two points are coincident - The two points are coincident + Els dos punts són coincidents @@ -5210,12 +5210,12 @@ L'angle final serà l'angle de base més aquesta quantitat. Object must be a closed shape - Object must be a closed shape + L'objecte ha de ser una forma tancada No solid object created - No solid object created + No s'ha creat cap objecte sòlid @@ -5240,7 +5240,7 @@ L'angle final serà l'angle de base més aquesta quantitat. Found 2 objects: fusing them - Found 2 objects: fusing them + Trobats 2 objectes: fusionant-los @@ -5444,17 +5444,17 @@ from menu Tools -> Addon Manager Name exists. Overwrite? - Name exists. Overwrite? + El nom ja existeix. El sobreescric? Error: json module not found. Unable to load style - Error: json module not found. Unable to load style + Error: no es troba el mòdul json. No es pot carregar l'estil Error: json module not found. Unable to save style - Error: json module not found. Unable to save style + Error: no es troba el mòdul json. No es pot desar l'estil @@ -5470,7 +5470,7 @@ from menu Tools -> Addon Manager Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction + La direcció d'equidistància no ha sigut definida. Per favor, mou el cursor a un costat o altre de l'objecte per indicar-ne la direcció @@ -5494,27 +5494,27 @@ from menu Tools -> Addon Manager X factor - X factor + Factor X Y factor - Y factor + Factor Y Z factor - Z factor + Factor Z Uniform scaling - Uniform scaling + Escalat uniforme Working plane orientation - Working plane orientation + Orientació del pla de treball @@ -5584,7 +5584,7 @@ from menu Tools -> Addon Manager Face color - Face color + Color de cara @@ -5599,7 +5599,7 @@ from menu Tools -> Addon Manager New Layer - New Layer + Nova capa @@ -5612,7 +5612,7 @@ from menu Tools -> Addon Manager successfully exported - successfully exported + exportat amb èxit @@ -5620,7 +5620,7 @@ from menu Tools -> Addon Manager Did not find enough coordinates - Did not find enough coordinates + No s'han trobat suficients coordenades @@ -5641,7 +5641,7 @@ from menu Tools -> Addon Manager Select Plane - Select Plane + Selecciona el Pla @@ -6112,7 +6112,7 @@ on supported nodes and on supported objects. Add point - Add point + Afegeix punt @@ -6215,7 +6215,7 @@ Create a group first to use this tool. Select group - Select group + Selecciona grup @@ -6301,7 +6301,7 @@ El podeu utilitzar per a desar una posició de la càmera i els estats dels obje Flip dimension - Flip dimension + Inverteix dimensió @@ -6535,7 +6535,7 @@ CTRL to snap, SHIFT to constrain, ALT to copy. Layer - Layer + Capa @@ -6550,7 +6550,7 @@ Objects added to this layer can share the same visual properties such as line co Point array - Point array + Matriu de punts @@ -6677,7 +6677,7 @@ to turn it into a 'Draft Dimension' object. Stretch - Stretch + Estira @@ -6707,7 +6707,7 @@ then draw a line to specify the distance and direction of stretching. Mirror - Mirror + Simetria @@ -6786,7 +6786,7 @@ The array can be turned into an orthogonal or a circular array by changing its t Set slope - Set slope + Determina el pendent @@ -6795,11 +6795,10 @@ If a polyline is selected, it will apply the slope transformation to each of its The slope will always change the Z value, therefore this command only works well for straight Draft lines that are drawn in the XY plane. Selected objects that aren't single lines will be ignored. - Sets the slope of the selected line by changing the value of the Z value of one of its points. -If a polyline is selected, it will apply the slope transformation to each of its segments. + Estableix el pendent (tangent de l'angle) de la línia seleccionada canviant el valor en l'eix Z d'un dels seus punts. Si se selecciona una polilínia, s'aplicarà el canvi de pendent a tots els seus segments. -The slope will always change the Z value, therefore this command only works well for -straight Draft lines that are drawn in the XY plane. Selected objects that aren't single lines will be ignored. +El pendent sempre canviarà el valor Z, per tant aquesta ordre només funciona bé per a +línies rectes dibuixades en el pla XY. Els objectes seleccionats que no siguin línies simples seran ignorats. diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.ts b/src/Mod/Draft/Resources/translations/Draft_cs.ts index 2a2e6ec3f8..6b5264c569 100644 --- a/src/Mod/Draft/Resources/translations/Draft_cs.ts +++ b/src/Mod/Draft/Resources/translations/Draft_cs.ts @@ -3237,43 +3237,43 @@ Není k dispozici, pokud je povolena možnost předvolby návrhu „Použít zá Ponor - - - - - - + + + + + + Converting: Konverze: - - - + + + Conversion successful Konverze úspěšná - - + + LibreDWG converter not found Převaděč LibreDWG nebyl nalezen - - + + ODA converter not found Převodník ODA nebyl nalezen - - + + QCAD converter not found Převaděč QCAD nebyl nalezen - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3284,7 +3284,7 @@ Další informace viz: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_de.qm b/src/Mod/Draft/Resources/translations/Draft_de.qm index eafc7d2838..900a515425 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_de.qm and b/src/Mod/Draft/Resources/translations/Draft_de.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_de.ts b/src/Mod/Draft/Resources/translations/Draft_de.ts index bb1e9d2751..63e8862768 100644 --- a/src/Mod/Draft/Resources/translations/Draft_de.ts +++ b/src/Mod/Draft/Resources/translations/Draft_de.ts @@ -3235,43 +3235,43 @@ Nicht verfügbar, wenn die Option "Primitive Teile verwenden" aktiviert istDraft - - - - - - + + + + + + Converting: Umwandlung: - - - + + + Conversion successful Umwandlung erfolgreich - - + + LibreDWG converter not found LibreDWG-Konverter nicht gefunden - - + + ODA converter not found ODA-Konverter nicht gefunden - - + + QCAD converter not found QCAD-Konverter nicht gefunden - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3282,7 +3282,7 @@ Für weitere Informationen siehe: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. @@ -7542,7 +7542,7 @@ This property is read-only, as the number depends on the points in 'Point Object Create a face if this curve is closed - Create a face if this curve is closed + Erstelle eine Fläche, wenn diese Kurve geschlossen ist @@ -7621,7 +7621,7 @@ This property is read-only, as the number depends on the points in 'Point Object The normal direction of the text of the dimension - The normal direction of the text of the dimension + Die normale Richtung des Textes dieses Maßes @@ -8111,7 +8111,7 @@ beyond the dimension line Draft - Tiefgang + Draft diff --git a/src/Mod/Draft/Resources/translations/Draft_el.ts b/src/Mod/Draft/Resources/translations/Draft_el.ts index be5d9876c6..b0e2b5e2f7 100644 --- a/src/Mod/Draft/Resources/translations/Draft_el.ts +++ b/src/Mod/Draft/Resources/translations/Draft_el.ts @@ -3237,43 +3237,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabledΒύθισμα - - - - - - + + + + + + Converting: Converting: - - - + + + Conversion successful Conversion successful - - + + LibreDWG converter not found LibreDWG converter not found - - + + ODA converter not found ODA converter not found - - + + QCAD converter not found QCAD converter not found - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3284,7 +3284,7 @@ For more information see: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_es-AR.qm b/src/Mod/Draft/Resources/translations/Draft_es-AR.qm index 2481686bfe..df8fa3e1c6 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_es-AR.qm and b/src/Mod/Draft/Resources/translations/Draft_es-AR.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_es-AR.ts b/src/Mod/Draft/Resources/translations/Draft_es-AR.ts index 308c746aac..f37bc3c20c 100644 --- a/src/Mod/Draft/Resources/translations/Draft_es-AR.ts +++ b/src/Mod/Draft/Resources/translations/Draft_es-AR.ts @@ -1930,7 +1930,7 @@ Nota: la exportación mediante C++ es más rápida, pero no está completada Permitir que FreeCAD descargue el convertidor Python para importar y exportar DXF. -También puede hacerlo manualmente instalando el entorno de trabajo "dxf_library" +También puede hacerlo manualmente instalando el banco de trabajo "dxf_library" desde el Administrador de Complementos. @@ -2288,7 +2288,7 @@ Esto podría fallar para la publicación de plantillas DXF R12. If checked, the Draft grid will always be visible when the Draft workbench is active. Otherwise only when using a command - Si está marcada, la cuadrícula del Borrador siempre estará visible cuando el entorno de trabajo Borrador esté activo. De lo contrario, sólo cuando se usa un comando + Si está marcada, la cuadrícula del Borrador siempre estará visible cuando el banco de trabajo Borrador esté activo. De lo contrario, sólo cuando se usa un comando @@ -3236,43 +3236,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCalado - - - - - - + + + + + + Converting: Convirtiendo: - - - + + + Conversion successful Conversión completada con éxito - - + + LibreDWG converter not found Conversor LibreDWG no encontrado - - + + ODA converter not found Conversor ODA no encontrado - - + + QCAD converter not found Conversor QCAD no encontrado - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3283,7 +3283,7 @@ Para más información véase: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts index 8b321cad7e..bed19de844 100644 --- a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts +++ b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts @@ -3236,43 +3236,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCalado - - - - - - + + + + + + Converting: Convirtiendo: - - - + + + Conversion successful Conversión completada con éxito - - + + LibreDWG converter not found Conversor LibreDWG no encontrado - - + + ODA converter not found Conversor ODA no encontrado - - + + QCAD converter not found Conversor QCAD no encontrado - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3283,7 +3283,7 @@ Para más información véase: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.ts b/src/Mod/Draft/Resources/translations/Draft_eu.ts index 8b01305521..29690b4ca2 100644 --- a/src/Mod/Draft/Resources/translations/Draft_eu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_eu.ts @@ -3228,43 +3228,43 @@ Ez dago erabilgarri zirriborroen 'Erabili piezen jatorrizkoak' aukera gaituta ba Zirriborroa - - - - - - + + + + + + Converting: Bihurtzen: - - - + + + Conversion successful Bihurketa ongi egin da - - + + LibreDWG converter not found Ez da aurkitu LibreDWG bihurtzailea - - + + ODA converter not found Ez da aurkitu ODA fitxategi-bihurtzailea - - + + QCAD converter not found Ez da aurkitu QCAD bihurtzailea - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3275,7 +3275,7 @@ Informazio gehiagorako, ikusi: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.ts b/src/Mod/Draft/Resources/translations/Draft_fi.ts index cb9c8409c0..68fb6724e4 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fi.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fi.ts @@ -3241,43 +3241,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSyväys (vesirajasta pohjaan) - - - - - - + + + + + + Converting: Converting: - - - + + + Conversion successful Conversion successful - - + + LibreDWG converter not found LibreDWG converter not found - - + + ODA converter not found ODA converter not found - - + + QCAD converter not found QCAD converter not found - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3288,7 +3288,7 @@ For more information see: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.qm b/src/Mod/Draft/Resources/translations/Draft_fr.qm index 0c245c5744..46887fd11b 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fr.qm and b/src/Mod/Draft/Resources/translations/Draft_fr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.ts b/src/Mod/Draft/Resources/translations/Draft_fr.ts index 8406b63bc7..9ed19d59a2 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fr.ts @@ -3236,46 +3236,46 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Draft - Tirant d'eau + Esquisse - - - - - - + + + + + + Converting: Conversion en cours : - - - + + + Conversion successful Conversion réussie - - + + LibreDWG converter not found Convertisseur LibreDWG introuvable - - + + ODA converter not found Convertisseur ODA introuvable - - + + QCAD converter not found Convertisseur QCAD introuvable - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3286,7 +3286,7 @@ Pour plus d'informations, voir : https://wiki.freecad.org/Import_Export_Preferences/fr - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. @@ -6041,7 +6041,7 @@ Cependant, une seule esquisse avec des traces déconnectées sera convertie en p Moves the selected objects from one base point to another point. If the "copy" option is active, it will create displaced copies. CTRL to snap, SHIFT to constrain. - Déplace les objets sélectionnés d'un point de base vers un autre point. + Déplacer les objets sélectionnés d'un point de base vers un autre point. Si l'option "copie" est active, elle créera des copies déplacées. Ctrl pour aimanter, Maj pour contraindre. @@ -6230,7 +6230,8 @@ Ctrl pour aimanter, Maj pour contraindre. Maintenir Alt et cliquer pour créer u Moves the selected objects to an existing group, or removes them from any group. Create a group first to use this tool. - Déplace les objets sélectionnés vers un groupe existant, ou les supprime de n'importe quel groupe. + Déplacer les objets sélectionnés vers un groupe existant, +ou les supprimer de n'importe quel groupe. Créer d'abord un groupe pour utiliser cet outil. @@ -6519,7 +6520,7 @@ Ctrl pour aimanter, Alt pour sélectionner des objets tangents. Creates a facebinder object from selected faces. - Crée un objet Surfaces liées à partir des faces sélectionnées. + Créer une surface liée à partir des faces sélectionnées. @@ -8112,7 +8113,7 @@ au-delà de la ligne de la dimension Draft - Tirant d'eau + Esquisse diff --git a/src/Mod/Draft/Resources/translations/Draft_gl.ts b/src/Mod/Draft/Resources/translations/Draft_gl.ts index bf0f199596..9cf11f0a21 100644 --- a/src/Mod/Draft/Resources/translations/Draft_gl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_gl.ts @@ -3241,43 +3241,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCalado - - - - - - + + + + + + Converting: Converting: - - - + + + Conversion successful Conversion successful - - + + LibreDWG converter not found LibreDWG converter not found - - + + ODA converter not found ODA converter not found - - + + QCAD converter not found QCAD converter not found - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3288,7 +3288,7 @@ For more information see: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.ts b/src/Mod/Draft/Resources/translations/Draft_hr.ts index 33e8a48b07..317e3e3139 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hr.ts @@ -3306,43 +3306,43 @@ Nije dostupno ako je omogućena opcija 'Koristi se primitivni dio' postavki Nacr Skica - - - - - - + + + + + + Converting: Pretvaranje: - - - + + + Conversion successful Pretvorba je uspješna - - + + LibreDWG converter not found LibreDWG converter not found - - + + ODA converter not found ODA converter not found - - + + QCAD converter not found QCAD converter not found - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3353,7 +3353,7 @@ For more information see: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.ts b/src/Mod/Draft/Resources/translations/Draft_hu.ts index 4297a6298f..9489bbbb62 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hu.ts @@ -3245,43 +3245,43 @@ Nem érhető el, ha a 'Rész-primitívek használata' beállítás engedélyezve Tervrajz - - - - - - + + + + + + Converting: Átalakítás: - - - + + + Conversion successful Átalakítás sikeres - - + + LibreDWG converter not found LibreDWG átalakító nem található - - + + ODA converter not found ODA átalakító nem található - - + + QCAD converter not found QCAD átalakító nem található - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3292,7 +3292,7 @@ További információkért lásd: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_it.qm b/src/Mod/Draft/Resources/translations/Draft_it.qm index 460e8810cc..3783398bf5 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_it.qm and b/src/Mod/Draft/Resources/translations/Draft_it.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_it.ts b/src/Mod/Draft/Resources/translations/Draft_it.ts index 379431c83c..4576f26336 100644 --- a/src/Mod/Draft/Resources/translations/Draft_it.ts +++ b/src/Mod/Draft/Resources/translations/Draft_it.ts @@ -3238,46 +3238,46 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Draft - Pescaggio + Draft - - - - - - + + + + + + Converting: Conversione in corso: - - - + + + Conversion successful Conversione riuscita - - + + LibreDWG converter not found Convertitore LibreDWG non trovato - - + + ODA converter not found Convertitore ODA non trovato - - + + QCAD converter not found Convertitore QCAD non trovato - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3288,7 +3288,7 @@ Per maggiori informazioni si veda: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. @@ -8108,7 +8108,7 @@ beyond the dimension line Draft - Pescaggio + Draft diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.qm b/src/Mod/Draft/Resources/translations/Draft_ja.qm index 660ebb40ec..7ea7fd7e53 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ja.qm and b/src/Mod/Draft/Resources/translations/Draft_ja.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.ts b/src/Mod/Draft/Resources/translations/Draft_ja.ts index 6a22ed0016..f848fd92bb 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ja.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ja.ts @@ -41,7 +41,7 @@ Layers manager - Layers manager + レイヤーマネージャー @@ -1635,7 +1635,7 @@ such as "Arial:Bold" Screen - Screen + スクリーン @@ -3228,43 +3228,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabled喫水 - - - - - - + + + + + + Converting: Converting: - - - + + + Conversion successful Conversion successful - - + + LibreDWG converter not found LibreDWG converter not found - - + + ODA converter not found ODA converter not found - - + + QCAD converter not found QCAD converter not found - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3275,7 +3275,7 @@ For more information see: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_ka.ts b/src/Mod/Draft/Resources/translations/Draft_ka.ts index 47ba90a3c7..8b03549191 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ka.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ka.ts @@ -3238,43 +3238,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabledწყალშიგი - - - - - - + + + + + + Converting: გადაყვანა: - - - + + + Conversion successful გადაყვანა წარმატებულია - - + + LibreDWG converter not found LibreDWG გარდამქმნელი ვერ ვიპოვე - - + + ODA converter not found ODA გარდამქმნელი ვერ ვიპოვე - - + + QCAD converter not found QCAD გარდამქმნელი ვერ ვიპოვე - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3285,7 +3285,7 @@ https://wiki.freecad.org/Import_Export_Preferences https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_ko.ts b/src/Mod/Draft/Resources/translations/Draft_ko.ts index 91a9d75bb9..225566ebd3 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ko.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ko.ts @@ -3237,43 +3237,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabled흘수 - - - - - - + + + + + + Converting: Converting: - - - + + + Conversion successful Conversion successful - - + + LibreDWG converter not found LibreDWG converter not found - - + + ODA converter not found ODA converter not found - - + + QCAD converter not found QCAD converter not found - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3284,7 +3284,7 @@ For more information see: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.ts b/src/Mod/Draft/Resources/translations/Draft_nl.ts index 9fa2b87839..e3ad48a8ce 100644 --- a/src/Mod/Draft/Resources/translations/Draft_nl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_nl.ts @@ -3240,43 +3240,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabledSchets - - - - - - + + + + + + Converting: Converting: - - - + + + Conversion successful Conversion successful - - + + LibreDWG converter not found LibreDWG converter not found - - + + ODA converter not found ODA converter not found - - + + QCAD converter not found QCAD converter not found - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3287,7 +3287,7 @@ For more information see: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.qm b/src/Mod/Draft/Resources/translations/Draft_pl.qm index cdeb3d30cc..a78a626120 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pl.qm and b/src/Mod/Draft/Resources/translations/Draft_pl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.ts b/src/Mod/Draft/Resources/translations/Draft_pl.ts index 7e4eeec4ac..7884d71747 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pl.ts @@ -458,7 +458,7 @@ A Link array is more efficient when creating multiple copies, but it cannot be f (Placeholder for the icon) - (Miejsce na ikonkę) + (Miejsce na ikonę) @@ -594,7 +594,7 @@ A Link array is more efficient when creating multiple copies, but it cannot be f (Placeholder for the icon) - (Miejsce na ikonę) + (Miejsce na ikonkę) @@ -1999,7 +1999,7 @@ z Menedżera dodatków. If you want the non-named blocks (beginning with a *) to be imported too - Zaznacz tą opcję jeśli chcesz, aby zaimportować również bloki bez nazwy (zaczynające się od *) + Zaznacz tę opcję, jeśli chcesz, aby zaimportować również bloki bez nazwy (zaczynające się od *) @@ -2713,7 +2713,7 @@ Te linie są grubsze niż normalne linie siatki. Global - Globalne + Globalnie @@ -3110,7 +3110,7 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele Arc - Wzdłuż łuku + Łuk @@ -3252,43 +3252,43 @@ Opcja jest niedostępna, jeśli opcja preferencji Rysunku Roboczego "używaj ele Rysunek roboczy - - - - - - + + + + + + Converting: Konwertowanie: - - - + + + Conversion successful Konwersja zakończona - - + + LibreDWG converter not found Nie znaleziono konwertera LibreDWG - - + + ODA converter not found Nie znaleziono konwertera ODA - - + + QCAD converter not found Nie znaleziono konwertera QCAD - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3299,7 +3299,7 @@ Aby uzyskać więcej informacji, zobacz stronę: https://wiki.freecad.org/Import_Export_Preferences/pl - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. @@ -5178,7 +5178,7 @@ Kąt końcowy będzie równy kątowi podstawowemu plus ta wartość. Edit - Edycja + Edytuj @@ -6072,7 +6072,7 @@ CTRL, aby przyciągnąć, SHIFT, aby utworzyć wiązanie. Arc - Wzdłuż łuku + Łuk diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm index c698be5d41..5e23ee92e9 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm and b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts index 8fb6e62207..6e1d37b225 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts @@ -3233,43 +3233,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabledProjeto - - - - - - + + + + + + Converting: Convertendo: - - - + + + Conversion successful Conversão bem sucedida - - + + LibreDWG converter not found Conversor LibreDWG não encontrado - - + + ODA converter not found Conversor ODA não encontrado - - + + QCAD converter not found Conversor QCAD não encontrado - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3280,7 +3280,7 @@ Para mais informações, visite: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. @@ -5401,7 +5401,7 @@ The final angle will be the base angle plus this amount. &Modification - &Alterar + &Modificação diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts index 150b2cf2bf..d5dffd598d 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts @@ -3238,43 +3238,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCalado do Navio - - - - - - + + + + + + Converting: Converting: - - - + + + Conversion successful Conversion successful - - + + LibreDWG converter not found LibreDWG converter not found - - + + ODA converter not found ODA converter not found - - + + QCAD converter not found QCAD converter not found - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3285,7 +3285,7 @@ For more information see: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.ts b/src/Mod/Draft/Resources/translations/Draft_ro.ts index 7d54f5497c..d84a400f73 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ro.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ro.ts @@ -3241,43 +3241,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabledPescaj - - - - - - + + + + + + Converting: Converting: - - - + + + Conversion successful Conversion successful - - + + LibreDWG converter not found LibreDWG converter not found - - + + ODA converter not found ODA converter not found - - + + QCAD converter not found QCAD converter not found - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3288,7 +3288,7 @@ For more information see: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.qm b/src/Mod/Draft/Resources/translations/Draft_ru.qm index 73ff77448f..274e1f2c94 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ru.qm and b/src/Mod/Draft/Resources/translations/Draft_ru.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.ts b/src/Mod/Draft/Resources/translations/Draft_ru.ts index 1af1101300..9566a0c772 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ru.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ru.ts @@ -247,7 +247,7 @@ The distance between the dimension text and the dimension line - Расстояние между размерным текстом и размерной линией + Расстояние между текстом и размерной линией @@ -2710,7 +2710,7 @@ This might fail for post DXF R12 templates. Copy - Копировать + Скопировать @@ -3224,43 +3224,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabledОсадка - - - - - - + + + + + + Converting: Конвертировать: - - - + + + Conversion successful Конвертация прошла успешно - - + + LibreDWG converter not found Не найден конвертер LibreDWG - - + + ODA converter not found Не найден конвертер ODA - - + + QCAD converter not found Не найден конвертер QCAD - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3271,7 +3271,7 @@ https://wiki.freecad.org/Import_Export_Preferences https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. @@ -3438,7 +3438,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Vertices: - Вершины | Узлы: + Вершины: @@ -3459,7 +3459,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Objects have different placements. Distance between the two base points: - Объекты имеют разные размещения. Расстояние между двумя базовыми точками: + Объекты имеют разные позиции. Расстояние между двумя базовыми точками: @@ -3510,7 +3510,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Working plane aligned to global placement of - Рабочая плоскость выровнена по глобальному размещению + Рабочая плоскость, привязанная к глобальному расположению @@ -3527,7 +3527,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Path array - Массив путей + Массив по кривой @@ -3549,7 +3549,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Pick text position - Выбрать положение текста + Указать положение текста @@ -3557,7 +3557,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Pick first point - Укажите первую точку + Указать первую точку @@ -3580,7 +3580,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Pick next point - Укажите следующую точку + Указать следующую точку @@ -3595,7 +3595,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Select an object to join - Выберите объект для присоединения + Выбрать как объект для присоединения @@ -3610,7 +3610,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Pick location point - Выберите точку местоположения + Выбрать точку расположения @@ -5148,7 +5148,7 @@ The final angle will be the base angle plus this amount. Edit - Редактировать + Правка @@ -5669,7 +5669,7 @@ You may also select a three vertices or a Working Plane Proxy. Path array - Массив путей + Массив по кривой diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.qm b/src/Mod/Draft/Resources/translations/Draft_sl.qm index a03f383744..a70366dd12 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sl.qm and b/src/Mod/Draft/Resources/translations/Draft_sl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.ts b/src/Mod/Draft/Resources/translations/Draft_sl.ts index 3f664f8131..a2126279c3 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sl.ts @@ -3244,43 +3244,43 @@ Ta možnost ni na voljo, če je v prednastavitvah izrisovanja možnost "Uporabi Ugrez - - - - - - + + + + + + Converting: Pretvarjanje: - - - + + + Conversion successful Pretvaranje uspelo - - + + LibreDWG converter not found Pretvornika LibreDWG datotek ni mogoče najti - - + + ODA converter not found Pretvornika ODA datotek ni mogoče najti - - + + QCAD converter not found Pretvornika QCAD datotek ni mogoče najti - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3291,7 +3291,7 @@ For more information see: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. @@ -8036,7 +8036,7 @@ Write '$dim' so that it is replaced by the dimension length. Show the unit suffix - Show the unit suffix + Prikaži pripono enote diff --git a/src/Mod/Draft/Resources/translations/Draft_sr-CS.ts b/src/Mod/Draft/Resources/translations/Draft_sr-CS.ts index 06dd673562..848b4ab37a 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sr-CS.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sr-CS.ts @@ -3241,43 +3241,43 @@ Nije dostupno ako je omogućena Draft opcija podešavanja 'Koristi Part primitiv Zakošenje - - - - - - + + + + + + Converting: Konvertovanje: - - - + + + Conversion successful Konverzija je uspela - - + + LibreDWG converter not found LibreDWG konvertor nije pronađen - - + + ODA converter not found ODA konvertor nije pronađen - - + + QCAD converter not found QCAD konvertor nije pronađen - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3288,7 +3288,7 @@ Za više informacija pogledajte: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_sr.qm b/src/Mod/Draft/Resources/translations/Draft_sr.qm index 8e41aeb88b..e941ae02f1 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sr.qm and b/src/Mod/Draft/Resources/translations/Draft_sr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sr.ts b/src/Mod/Draft/Resources/translations/Draft_sr.ts index 8c27e0a8cc..a03286c125 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sr.ts @@ -3241,43 +3241,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabledЗакошење - - - - - - + + + + + + Converting: Конвертовање: - - - + + + Conversion successful Конверзија је успела - - + + LibreDWG converter not found LibreDWG конвертор датотека није пронађен - - + + ODA converter not found ODA конвертор није пронађен - - + + QCAD converter not found QCAD конвертор није пронађен - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3288,7 +3288,7 @@ https://wiki.freecad.org/Import_Export_Preferences https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. @@ -5166,7 +5166,7 @@ The final angle will be the base angle plus this amount. Edit - Уреди + Измени diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts index 4b3f7a18a6..0509f9b2d9 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts @@ -3237,43 +3237,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabledDjupgående - - - - - - + + + + + + Converting: Converting: - - - + + + Conversion successful Conversion successful - - + + LibreDWG converter not found LibreDWG converter not found - - + + ODA converter not found ODA converter not found - - + + QCAD converter not found QCAD converter not found - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3284,7 +3284,7 @@ For more information see: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_tr.qm b/src/Mod/Draft/Resources/translations/Draft_tr.qm index cdae0e767b..a96b81aaf4 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_tr.qm and b/src/Mod/Draft/Resources/translations/Draft_tr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_tr.ts b/src/Mod/Draft/Resources/translations/Draft_tr.ts index bf06260fe5..c848f7984b 100644 --- a/src/Mod/Draft/Resources/translations/Draft_tr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_tr.ts @@ -67,7 +67,7 @@ Isolate - Isolate + İzolasyon @@ -3240,43 +3240,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabledTaslak - - - - - - + + + + + + Converting: Converting: - - - + + + Conversion successful Conversion successful - - + + LibreDWG converter not found LibreDWG converter not found - - + + ODA converter not found ODA converter not found - - + + QCAD converter not found QCAD converter not found - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3287,7 +3287,7 @@ For more information see: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.ts b/src/Mod/Draft/Resources/translations/Draft_uk.ts index a349813847..7995d92c08 100644 --- a/src/Mod/Draft/Resources/translations/Draft_uk.ts +++ b/src/Mod/Draft/Resources/translations/Draft_uk.ts @@ -3244,43 +3244,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabledКреслення - - - - - - + + + + + + Converting: Converting: - - - + + + Conversion successful Conversion successful - - + + LibreDWG converter not found LibreDWG converter not found - - + + ODA converter not found ODA converter not found - - + + QCAD converter not found QCAD converter not found - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3291,7 +3291,7 @@ For more information see: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_val-ES.ts b/src/Mod/Draft/Resources/translations/Draft_val-ES.ts index 0a0f32e0d1..0496184fc0 100644 --- a/src/Mod/Draft/Resources/translations/Draft_val-ES.ts +++ b/src/Mod/Draft/Resources/translations/Draft_val-ES.ts @@ -3215,43 +3215,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabledCalat - - - - - - + + + + + + Converting: Converting: - - - + + + Conversion successful Conversion successful - - + + LibreDWG converter not found LibreDWG converter not found - - + + ODA converter not found ODA converter not found - - + + QCAD converter not found QCAD converter not found - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3262,7 +3262,7 @@ For more information see: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm index e8bd5bf698..cad0063407 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts index ca4d733936..ea8622cbb1 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts @@ -176,7 +176,7 @@ The line spacing for multi-line texts and labels (relative to the font size) - The line spacing for multi-line texts and labels (relative to the font size) + 多行文本和标签的行间距(相对于字体大小) @@ -247,7 +247,7 @@ The distance between the dimension text and the dimension line - The distance between the dimension text and the dimension line + 标注线和标注文本之间的距离 @@ -3236,43 +3236,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabled拔模 - - - - - - + + + + + + Converting: Converting: - - - + + + Conversion successful Conversion successful - - + + LibreDWG converter not found LibreDWG converter not found - - + + ODA converter not found ODA converter not found - - + + QCAD converter not found QCAD converter not found - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3283,7 +3283,7 @@ For more information see: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts index cf3d7708a4..0a6ecd73cc 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts @@ -3239,43 +3239,43 @@ Not available if Draft preference option 'Use Part Primitives' is enabled吃水 - - - - - - + + + + + + Converting: 轉換中: - - - + + + Conversion successful 轉換成功 - - + + LibreDWG converter not found LibreDWG converter not found - - + + ODA converter not found ODA converter not found - - + + QCAD converter not found QCAD converter not found - - + + No suitable external DWG converter has been found. Please set one manually under menu Edit -> Preferences -> Import/Export -> DWG For more information see: @@ -3286,7 +3286,7 @@ For more information see: https://wiki.freecad.org/Import_Export_Preferences - + Error during DWG conversion. Try moving the DWG file to a directory path without spaces and non-english characters, or try saving to a lower DWG version. diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem.ts b/src/Mod/Fem/Gui/Resources/translations/Fem.ts index 669e87c36d..5ec61f0d67 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem.ts @@ -5303,117 +5303,119 @@ used for the Elmer solver - + Fluid Constraints - + &Fluid Constraints - + + Electromagnetic Constraints - + + &Electromagnetic Constraints - + Geometrical Constraints - + &Geometrical Constraints - + Mechanical Constraints - + &Mechanical Constraints - + Thermal Constraints - + &Thermal Constraints - + Constraints without solver - + &Constraints without solver - + Overwrite Constants - + &Overwrite Constants - + Mesh - + M&esh - + Solve - + &Solve - + Results - + &Results - + Filter functions - + &Filter functions - + Utilities diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_be.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_be.ts index b080630089..686dddc007 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_be.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_be.ts @@ -5356,117 +5356,119 @@ used for the Elmer solver &Электрастатычныя абмежаванні - + Fluid Constraints Гідрастатычныя абмежаванні - + &Fluid Constraints &Гідрастатычныя абмежаванні - + + Electromagnetic Constraints Электрамагнітныя абмежаванні - + + &Electromagnetic Constraints &Электрамагнітныя абмежаванні - + Geometrical Constraints Геаметрычныя абмежаванні - + &Geometrical Constraints Геа&метрычныя абмежаванні - + Mechanical Constraints Механічныя абмежаванні - + &Mechanical Constraints &Механічныя абмежаванні - + Thermal Constraints Цеплавыя абмежаванні - + &Thermal Constraints &Цеплавыя абмежаванні - + Constraints without solver Абмежаванні без сродку рашэння - + &Constraints without solver &Абмежаванні без сродку рашэння - + Overwrite Constants Перазапісаць канстанты - + &Overwrite Constants &Перазапісаць канстанты - + Mesh Mesh - + M&esh Паліганальная &сетка - + Solve Вырашыць - + &Solve Вы&рашыць - + Results Вынікі - + &Results &Вынікі - + Filter functions Функцыі фільтра - + &Filter functions Функцыі &фільтра - + Utilities Службовыя diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts index 37d66a8d25..3aa1b1c7dd 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts @@ -5381,117 +5381,119 @@ used for the Elmer solver &Electrostatic Constraints - + Fluid Constraints Fluid Constraints - + &Fluid Constraints &Fluid Constraints - - Electromagnetic Constraints - Electromagnetic Constraints - - - - &Electromagnetic Constraints - &Electromagnetic Constraints - - + + Electromagnetic Constraints + Restriccions electromagnètiques + + + + + &Electromagnetic Constraints + &Restriccions electromagnètiques + + + Geometrical Constraints Geometrical Constraints - + &Geometrical Constraints &Geometrical Constraints - + Mechanical Constraints Mechanical Constraints - + &Mechanical Constraints &Mechanical Constraints - + Thermal Constraints Thermal Constraints - + &Thermal Constraints &Thermal Constraints - + Constraints without solver Constraints without solver - + &Constraints without solver &Constraints without solver - + Overwrite Constants Overwrite Constants - + &Overwrite Constants &Overwrite Constants - + Mesh Mesh - + M&esh M&esh - + Solve Resol - + &Solve &Solve - + Results Resultats - + &Results &Results - + Filter functions Filter functions - + &Filter functions &Filter functions - + Utilities Utilitats diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts index d7edf8a321..208acba50f 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts @@ -5382,117 +5382,119 @@ používá se pro řešič Elmer &Elektrostatická omezení - + Fluid Constraints Omezení tekutin - + &Fluid Constraints &Omezení tekutiny - + + Electromagnetic Constraints Electromagnetic Constraints - + + &Electromagnetic Constraints &Electromagnetic Constraints - + Geometrical Constraints Geometrická omezení - + &Geometrical Constraints &Geometrická omezení - + Mechanical Constraints Mechanická omezení - + &Mechanical Constraints &Mechanická omezení - + Thermal Constraints Tepelná omezení - + &Thermal Constraints &Tepelná omezení - + Constraints without solver Omezení bez řešitele - + &Constraints without solver &Omezení bez řešiče - + Overwrite Constants Přepsat konstanty - + &Overwrite Constants &Přepsat konstanty - + Mesh Mesh - + M&esh Pletivo - + Solve Řešit - + &Solve &Řešit - + Results Results - + &Results &Výsledek - + Filter functions Funkce filtru - + &Filter functions &Filtrovat funkce - + Utilities Nástroje diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts index 40095340ab..441495b548 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts @@ -5357,117 +5357,119 @@ für den Löser Elmer verwendet werden &Elektrostatische Randbedingungen - + Fluid Constraints Strömungs-Randbedingungen - + &Fluid Constraints &Fluid-Randbedingungen - + + Electromagnetic Constraints Elektromagnetische Randbedingungen - + + &Electromagnetic Constraints &Elektromagnetische Randbedingungen - + Geometrical Constraints Geometrische Randbedingungen - + &Geometrical Constraints &Geometrische Randbedingungen - + Mechanical Constraints Mechanische Randbedingungen - + &Mechanical Constraints &Mechanische Randbedingungen - + Thermal Constraints Thermische Randbedingungen - + &Thermal Constraints &Thermische Randbedingungen - + Constraints without solver Randbedingungen ohne Solver - + &Constraints without solver &Randbedingungen ohne Solver - + Overwrite Constants Konstanten überschreiben - + &Overwrite Constants &Konstanten überschreiben - + Mesh Netz - + M&esh N&etz - + Solve Lösen - + &Solve &Lösen - + Results Ergebnisse - + &Results &Ergebnisse - + Filter functions Filterfunktionen - + &Filter functions &Filterfunktionen - + Utilities Dienstprogramme diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts index 5552f0e9bc..e3de34623f 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts @@ -5379,117 +5379,119 @@ used for the Elmer solver &Electrostatic Constraints - + Fluid Constraints Fluid Constraints - + &Fluid Constraints &Fluid Constraints - + + Electromagnetic Constraints Electromagnetic Constraints - + + &Electromagnetic Constraints &Electromagnetic Constraints - + Geometrical Constraints Geometrical Constraints - + &Geometrical Constraints &Geometrical Constraints - + Mechanical Constraints Mechanical Constraints - + &Mechanical Constraints &Mechanical Constraints - + Thermal Constraints Thermal Constraints - + &Thermal Constraints &Thermal Constraints - + Constraints without solver Constraints without solver - + &Constraints without solver &Constraints without solver - + Overwrite Constants Overwrite Constants - + &Overwrite Constants &Overwrite Constants - + Mesh Mesh - + M&esh M&esh - + Solve Επίλυση - + &Solve &Solve - + Results Results - + &Results &Results - + Filter functions Filter functions - + &Filter functions &Filter functions - + Utilities Βοηθήματα diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts index ce5ae53625..a045ef3276 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_es-AR.ts @@ -5381,117 +5381,119 @@ usada por el solver Elmer &Restricciones Electroestáticas - + Fluid Constraints Restricciones de Fluido - + &Fluid Constraints &Restricciones de Fluido - + + Electromagnetic Constraints Restricciones electromagnéticas - + + &Electromagnetic Constraints Restricciones &electromagnéticas - + Geometrical Constraints Restricciónes geométricas - + &Geometrical Constraints &Restricciónes geométricas - + Mechanical Constraints Restricciones mecánicas - + &Mechanical Constraints &Restricciones mecánicas - + Thermal Constraints Restricciones térmicas - + &Thermal Constraints &Restricciones térmicas - + Constraints without solver Restricciones sin solucionador - + &Constraints without solver &Restricciones sin solucionador - + Overwrite Constants Sobrescribir Constantes - + &Overwrite Constants &Sobrescribir Constantes - + Mesh Malla - + M&esh M&esh - + Solve Resolver - + &Solve &Resolver - + Results Resultados - + &Results &Resultados - + Filter functions Funciones de filtro - + &Filter functions &Filtrar funciones - + Utilities Utilidades diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts index c281775c5e..c922bbc448 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts @@ -5381,117 +5381,119 @@ usada por el solver Elmer &Restricciones Electroestáticas - + Fluid Constraints Restricciones de Fluido - + &Fluid Constraints &Restricciones de Fluido - + + Electromagnetic Constraints Restricciones electromagnéticas - + + &Electromagnetic Constraints Restricciones &electromagnéticas - + Geometrical Constraints Restricciónes geométricas - + &Geometrical Constraints &Restricciónes geométricas - + Mechanical Constraints Restricciones mecánicas - + &Mechanical Constraints &Restricciones mecánicas - + Thermal Constraints Restricciones térmicas - + &Thermal Constraints &Restricciones térmicas - + Constraints without solver Restricciones sin solucionador - + &Constraints without solver &Restricciones sin solucionador - + Overwrite Constants Sobrescribir Constantes - + &Overwrite Constants &Sobrescribir Constantes - + Mesh Malla - + M&esh M&esh - + Solve Resolver - + &Solve &Resolver - + Results Resultados - + &Results &Resultados - + Filter functions Funciones de filtro - + &Filter functions &Filtrar funciones - + Utilities Utilidades diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts index e53c4772d9..3ed63b690f 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts @@ -5383,117 +5383,119 @@ Elmer ebazlean Murrizketa &elektrostatikoak - + Fluid Constraints Jariakin-murrizketak - + &Fluid Constraints &Jariakin-murrizketak - + + Electromagnetic Constraints Murrizketa elektromagnetikoak - + + &Electromagnetic Constraints &Murrizketa elektromagnetikoak - + Geometrical Constraints Murrizketa geometrikoak - + &Geometrical Constraints Murrizketa ge&ometrikoak - + Mechanical Constraints Murrizketa mekanikoak - + &Mechanical Constraints Murrizketa &mekanikoak - + Thermal Constraints Murrizketa termalak - + &Thermal Constraints Murrizketa &termalak - + Constraints without solver Ebazlerik gabeko murrizketak - + &Constraints without solver &Ebazlerik gabeko murrizketak - + Overwrite Constants Gainidatzi murrizketak - + &Overwrite Constants &Gainidatzi murrizketak - + Mesh Amarauna - + M&esh A&marauna - + Solve Ebatzi - + &Solve E&batzi - + Results Emaitzak - + &Results &Emaitzak - + Filter functions Iragazki-funtzioak - + &Filter functions &Iragazi funtzioak - + Utilities Utilitateak diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts index f07c485d96..5a1be7fd83 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts @@ -5382,117 +5382,119 @@ used for the Elmer solver &Electrostatic Constraints - + Fluid Constraints Fluid Constraints - + &Fluid Constraints &Fluid Constraints - + + Electromagnetic Constraints Electromagnetic Constraints - + + &Electromagnetic Constraints &Electromagnetic Constraints - + Geometrical Constraints Geometrical Constraints - + &Geometrical Constraints &Geometrical Constraints - + Mechanical Constraints Mechanical Constraints - + &Mechanical Constraints &Mechanical Constraints - + Thermal Constraints Thermal Constraints - + &Thermal Constraints &Thermal Constraints - + Constraints without solver Constraints without solver - + &Constraints without solver &Constraints without solver - + Overwrite Constants Overwrite Constants - + &Overwrite Constants &Overwrite Constants - + Mesh Mesh - + M&esh M&esh - + Solve Ratkaise - + &Solve &Ratkaise - + Results Tulokset - + &Results &Tulokset - + Filter functions Filter functions - + &Filter functions &Filter functions - + Utilities Apuvälineet diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts index 9a771a5bbb..fb0d288356 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts @@ -5377,117 +5377,119 @@ used for the Elmer solver &Contraintes électrostatiques - + Fluid Constraints Contraintes du fluide - + &Fluid Constraints Contraintes du &fluide - + + Electromagnetic Constraints Contraintes électromagnétiques - + + &Electromagnetic Constraints Contraintes &électromagnétiques - + Geometrical Constraints Contraintes géométriques - + &Geometrical Constraints Contraintes &géométriques - + Mechanical Constraints Contraintes mécaniques - + &Mechanical Constraints Contraintes &mécaniques - + Thermal Constraints Contraintes thermiques - + &Thermal Constraints Contraintes &thermiques - + Constraints without solver Contraintes sans solveur - + &Constraints without solver &Contraintes sans solveur - + Overwrite Constants Remplacer les constantes - + &Overwrite Constants Remplacer les c&onstantes - + Mesh Maillage - + M&esh Ma&illage - + Solve Résoudre - + &Solve Ré&solution - + Results Résultats - + &Results &Résultats - + Filter functions Fonctions de filtrage - + &Filter functions &Fonctions de filtrage - + Utilities Utilitaires diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts index cd143103d2..fb2c9513ce 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts @@ -5382,117 +5382,119 @@ used for the Elmer solver &Electrostatic Constraints - + Fluid Constraints Fluid Constraints - + &Fluid Constraints &Fluid Constraints - + + Electromagnetic Constraints Electromagnetic Constraints - + + &Electromagnetic Constraints &Electromagnetic Constraints - + Geometrical Constraints Geometrical Constraints - + &Geometrical Constraints &Geometrical Constraints - + Mechanical Constraints Mechanical Constraints - + &Mechanical Constraints &Mechanical Constraints - + Thermal Constraints Thermal Constraints - + &Thermal Constraints &Thermal Constraints - + Constraints without solver Constraints without solver - + &Constraints without solver &Constraints without solver - + Overwrite Constants Overwrite Constants - + &Overwrite Constants &Overwrite Constants - + Mesh Mesh - + M&esh M&esh - + Solve Resolver - + &Solve &Solve - + Results Resultados - + &Results &Results - + Filter functions Filter functions - + &Filter functions &Filter functions - + Utilities Utilidades diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts index 07729878d8..6d918253ab 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts @@ -5389,117 +5389,119 @@ used for the Elmer solver &Elektrostatička ograničenja - + Fluid Constraints Ograničenja tekućine - + &Fluid Constraints &Ograničenja tekućine - + + Electromagnetic Constraints Electromagnetic Constraints - + + &Electromagnetic Constraints &Electromagnetic Constraints - + Geometrical Constraints Geometrijska ograničenja - + &Geometrical Constraints &Geometrijska ograničenja - + Mechanical Constraints Mehanička ograničenja - + &Mechanical Constraints &Mehanička ograničenja - + Thermal Constraints Toplinska ograničenja - + &Thermal Constraints &Toplinska ograničenja - + Constraints without solver Ograničenja bez alata za rješavanje - + &Constraints without solver &Ograničenja bez alata za rješavanje - + Overwrite Constants Prepiši konstante - + &Overwrite Constants &Prepiši konstante - + Mesh Mreža - + M&esh Mr&eža - + Solve Riješi - + &Solve &Riješi - + Results Rezultati - + &Results &Rezultati - + Filter functions Funkcije filtra - + &Filter functions &Funkcije filtra - + Utilities Uslužni programi diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts index 198c5ed945..9cd8fdd077 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts @@ -5368,117 +5368,119 @@ az Elmer megoldóhoz &Elektrosztatikus kötések - + Fluid Constraints Folyadék kényszerítések - + &Fluid Constraints &Folyadék kényszerítések - + + Electromagnetic Constraints Elektromágneses kényszerítések - + + &Electromagnetic Constraints &Elektromágneses kényszerítések - + Geometrical Constraints Geometriai kényszerítések - + &Geometrical Constraints &Geometriai kényszerítések - + Mechanical Constraints Mechanikai kényszerítések - + &Mechanical Constraints &Mechanikai kényszerítések - + Thermal Constraints Hőmérséklet kényszerítések - + &Thermal Constraints &Hőmérséklet kényszerítések - + Constraints without solver Kényszerítések megoldó nélkül - + &Constraints without solver &Kényszerítések megoldó nélkül - + Overwrite Constants Fellülíró kényszerítések - + &Overwrite Constants &Fellülíró kényszerítések - + Mesh Háló - + M&esh &Háló - + Solve Megoldás - + &Solve &Megoldás - + Results Eredmények - + &Results &Eredmény - + Filter functions Szűrési funkciók - + &Filter functions Szűrési &funkció - + Utilities Kiegészítők diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts index 02ac4211f3..b4ca0de876 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts @@ -5382,117 +5382,119 @@ used for the Elmer solver &Vincoli Elettrostatici - + Fluid Constraints Vincoli dei Fluidi - + &Fluid Constraints &Vincoli dei Fluidi - - Electromagnetic Constraints - Electromagnetic Constraints - - - - &Electromagnetic Constraints - &Electromagnetic Constraints - - + + Electromagnetic Constraints + Vincoli Elettromagnetici + + + + + &Electromagnetic Constraints + &Vincoli Elettromagnetici + + + Geometrical Constraints Vincoli Geometrici - + &Geometrical Constraints &Vincoli Geometrici - + Mechanical Constraints Vincoli Meccanici - + &Mechanical Constraints &Vincoli Meccanici - + Thermal Constraints Vincoli Termici - + &Thermal Constraints &Vincoli Termici - + Constraints without solver Vincoli senza risolutore - + &Constraints without solver &Vincoli senza risolutore - + Overwrite Constants Sovrascrivi Costanti - + &Overwrite Constants S&Ovrascrivi costanti - + Mesh Mesh - + M&esh M&esh - + Solve Risolvi - + &Solve Ri&solvi - + Results Risultati - + &Results &Risultati - + Filter functions Funzioni di filtro - + &Filter functions &Funzioni di filtro - + Utilities Utilità diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts index 9248c5e27b..f099e95e5d 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts @@ -5365,117 +5365,119 @@ used for the Elmer solver 静電的拘束(&E) - + Fluid Constraints 流体的拘束 - + &Fluid Constraints 流体的拘束(&F) - + + Electromagnetic Constraints Electromagnetic Constraints - + + &Electromagnetic Constraints &Electromagnetic Constraints - + Geometrical Constraints 幾何的拘束 - + &Geometrical Constraints 幾何的拘束(&G) - + Mechanical Constraints 機械的拘束 - + &Mechanical Constraints 機械的拘束(&M) - + Thermal Constraints 熱的拘束 - + &Thermal Constraints 熱的拘束(&T) - + Constraints without solver ソルバー無しの拘束 - + &Constraints without solver ソルバー無しの拘束(&C) - + Overwrite Constants 定数を上書き - + &Overwrite Constants 定数を上書き(&O) - + Mesh Mesh - + M&esh メッシュ(&e) - + Solve 求解 - + &Solve 求解(&S) - + Results 結果 - + &Results 結果(&R) - + Filter functions フィルター関数 - + &Filter functions フィルター関数(&F) - + Utilities ユーティリティ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts index d66c4066cb..0afac39035 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ka.ts @@ -5372,117 +5372,119 @@ used for the Elmer solver &ელექტროსტატიკური შეზღუდვები - + Fluid Constraints სითხის შეზღუდვები - + &Fluid Constraints &სითხის შეზღუდვები - + + Electromagnetic Constraints ელექტრომაგნიტური შეზღუდვები - + + &Electromagnetic Constraints &ელექტრომაგნიტური შეზღუდვები - + Geometrical Constraints გეომეტრიული შეზღუდვები - + &Geometrical Constraints &გეომეტრიული შეზღუდვები - + Mechanical Constraints მექანიკური შეზღუდვები - + &Mechanical Constraints &მექანიკური შეზღუდვები - + Thermal Constraints თერმული შეზღუდვები - + &Thermal Constraints &თერმული შეზღუდვები - + Constraints without solver შეზღუდვები ამომხსნელის გარეშე - + &Constraints without solver &შეზღუდვები ამომხსნელის გარეშე - + Overwrite Constants კონსტანტებზე გადაწერა - + &Overwrite Constants &კონსტანტებზე გადაწერა - + Mesh Mesh - + M&esh &ბადე - + Solve გადაწყვეტა - + &Solve &გადაწყვეტა - + Results შედეგები - + &Results &შედეგები - + Filter functions ფილტრის ფუნქციები - + &Filter functions &ფილტრის ფუნქციები - + Utilities ხელსაწყოები diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts index 58127821e9..01eae13911 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts @@ -5382,117 +5382,119 @@ used for the Elmer solver 정전기 제약조건(&E) - + Fluid Constraints Fluid Constraints - + &Fluid Constraints 유체 제약조건(&F) - + + Electromagnetic Constraints Electromagnetic Constraints - + + &Electromagnetic Constraints &Electromagnetic Constraints - + Geometrical Constraints Geometrical Constraints - + &Geometrical Constraints 형상 제약조건(&G) - + Mechanical Constraints Mechanical Constraints - + &Mechanical Constraints 기계적 제약조건(&M) - + Thermal Constraints Thermal Constraints - + &Thermal Constraints 열 제약조건(&T) - + Constraints without solver Constraints without solver - + &Constraints without solver &Constraints without solver - + Overwrite Constants Overwrite Constants - + &Overwrite Constants 상수 덮어쓰기(&O) - + Mesh Mesh - + M&esh 메시(&E) - + Solve 솔버 실행 - + &Solve &Solve - + Results Results - + &Results 결과(&R) - + Filter functions Filter functions - + &Filter functions 필터 기능(&F) - + Utilities Utilities diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts index 370cf4edb1..2f7a098e53 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts @@ -250,7 +250,7 @@ Creates a FEM constraint for a temperature/concentrated heat flux acting on a face - Creates a FEM constraint for a temperature/concentrated heat flux acting on a face + Creert een FEM-randvoorwaarde voor een temperatuur- of geconcentreerde warmte-flux op een oppervlak @@ -268,7 +268,7 @@ Create FEM constraint for transforming a face - Create FEM constraint for transforming a face + Creert een FEM-randvoorwaarde voor het transformeren van een oppervlak @@ -286,7 +286,7 @@ Creates a FEM mesh nodes set - Creates a FEM mesh nodes set + Creert een set knooppunten voor een FEM-maaswerk @@ -474,7 +474,7 @@ Linearized Stresses Plot title - Linearized Stresses + Gelineariseerde spanningen @@ -486,7 +486,7 @@ Membrane and Bending Plot legend item label - Membrane and Bending + Membraan en buiging @@ -502,12 +502,12 @@ Stress linearization plot - Stress linearization plot + Spanningslinearisatie-grafiek Define/create stress linearization plots - Define/create stress linearization plots + Definiëer/creëer spanningslinearisatie-grafieken @@ -591,37 +591,37 @@ Make FEM constraint for bearing - Make FEM constraint for bearing + Maak een FEM-randvoorwaarde voor een lager Make FEM constraint contact on face - Make FEM constraint contact on face + Maak een FEM-randvoorwaarde-contact op vlak Make FEM constraint displacement on face - Make FEM constraint displacement on face + Maak een FEM-randvoorwaarde-verplaatsing op vlak Make FEM constraint fixed geometry - Make FEM constraint fixed geometry + Maak een FEM-randvoorwaarde vaste geometrie Create fluid boundary condition - Create fluid boundary condition + Creer een vloeistof randvoorwaarde Make FEM constraint force on geometry - Make FEM constraint force on geometry + Maak een FEM-randvoorwaarde voor een kracht op een geometrie Make FEM constraint for gear - Make FEM constraint for gear + Maak een FEM-randvoorwaarde voor een tandwiel @@ -5382,117 +5382,119 @@ used for the Elmer solver &Electrostatic Constraints - + Fluid Constraints Fluid Constraints - + &Fluid Constraints &Fluid Constraints - + + Electromagnetic Constraints Elektromagnetische beperkingen - + + &Electromagnetic Constraints &Elektromagnetische beperkingen - + Geometrical Constraints Geometrical Constraints - + &Geometrical Constraints &Geometrical Constraints - + Mechanical Constraints Mechanical Constraints - + &Mechanical Constraints &Mechanical Constraints - + Thermal Constraints Thermal Constraints - + &Thermal Constraints &Thermal Constraints - + Constraints without solver Constraints without solver - + &Constraints without solver &Constraints without solver - + Overwrite Constants Overwrite Constants - + &Overwrite Constants &Overwrite Constants - + Mesh Mesh - + M&esh M&esh - + Solve Oplossen - + &Solve &Oplossen - + Results Resultaten - + &Results &Resultaten - + Filter functions Filter functies - + &Filter functions &Filter functions - + Utilities Hulpmiddelen diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts index 4df8c6ba04..b8e3d68ab6 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts @@ -1966,7 +1966,7 @@ Wybierz inny plik. Selection error - Błąd selekcji + Błąd zaznaczenia @@ -2027,7 +2027,7 @@ Wybierz inny plik. Selection error - Błąd zaznaczenia + Błąd selekcji @@ -2214,7 +2214,7 @@ Wybierz inny plik. Selection error - Błąd selekcji + Błąd wyboru @@ -2252,7 +2252,7 @@ Wybierz inny plik. Selection error - Błąd wyboru + Błąd w zaznaczeniu @@ -2280,7 +2280,7 @@ Wybierz inny plik. Selection error - Błąd w zaznaczeniu + Błąd selekcji @@ -5372,117 +5372,119 @@ użyta przez solver Elmer Wiązania &elektrostatyczne - + Fluid Constraints Wiązania płynu - + &Fluid Constraints Wiązania &płynu - + + Electromagnetic Constraints Wiązania elektromagnetyczne - + + &Electromagnetic Constraints &Wiązania elektromagnetyczne - + Geometrical Constraints Wiązania geometryczne - + &Geometrical Constraints Wiązania &geometryczne - + Mechanical Constraints Wiązania mechaniczne - + &Mechanical Constraints Wiązania &mechaniczne - + Thermal Constraints Wiązania termiczne - + &Thermal Constraints Wiązania &termiczne - + Constraints without solver Wiązania bez solvera - + &Constraints without solver &Wiązania bez solvera - + Overwrite Constants Nadpisz stałe - + &Overwrite Constants &Nadpisz stałe - + Mesh Siatka - + M&esh &Siatka - + Solve Rozwiąż - + &Solve &Rozwiąż - + Results Wyniki - + &Results &Wyniki - + Filter functions Funkcje filtrów - + &Filter functions &Funkcje filtra - + Utilities &Narzędzia diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts index 09eddc3f92..96e42ee0c0 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts @@ -578,12 +578,12 @@ Warp filter - Filtro de deformação + Filtro de dobra Warp the geometry along a vector field by a certain factor - Deforma a geometria ao longo de um campo de vetores por um determindado fator + Dobra a geometria ao longo de um campo de vetores por um fator determindado @@ -962,7 +962,7 @@ Beam, shell element 3D output format - Beam, shell element 3D output format + Viga, formato de saída do elemento 3D @@ -1095,7 +1095,7 @@ serão mescladas para tornar os limites de volume invisíveis. <html><head/><body><p>Leave blank to use default Elmer elmer binary file</p><p><span style=" font-weight:600;">Note:</span> To use multithreading you must specify here<br> the executable variant with the suffix &quot;_mpi&quot;.</p></body></html> - <html><head/><body><p>Leave blank to use default Elmer elmer binary file</p><p><span style=" font-weight:600;">Note:</span> To use multithreading you must specify here<br> the executable variant with the suffix &quot;_mpi&quot;.</p></body></html> + <html><head/><body><p>Deixe em branco para usar o arquivo binário padrão dos Elmer elmer</p><p><span style=" font-weight:600;">Nota:</span> Para usar multithreading você deve especificar aqui<br> a variante executável com o sufixo &quot;_mpi&quot;.</p></body></html> @@ -1115,7 +1115,7 @@ serão mescladas para tornar os limites de volume invisíveis. <html><head/><body><p><span style=" font-weight:600;">Note:</span> It is recommended to use an even number of cores to benefit from mesh symmetries. (Using 8 cores can be faster than 9 cores.)<br/><span style=" font-weight:600;">Note too:</span> In extreme cases ElmerSolver might not converge if the core number is too high.</p></body></html> - <html><head/><body><p><span style=" font-weight:600;">Note:</span> It is recommended to use an even number of cores to benefit from mesh symmetries. (Using 8 cores can be faster than 9 cores.)<br/><span style=" font-weight:600;">Note too:</span> In extreme cases ElmerSolver might not converge if the core number is too high.</p></body></html> + <html><head/><body><p><span style=" font-weight:600;">Nota:</span> Recomenda-se usar um número par de núcleos para se beneficiar de simetrias da malha. (O uso de 8 núcleos pode ser mais rápido que 9 núcleos.)<br/><span style=" font-weight:600;">Nota também:</span> Em casos extremos, ElmerSolver pode não convergir se o número de núcleos for muito alto.</p></body></html> @@ -1528,8 +1528,8 @@ serão listados como disponível. Material cards appear sorted by their resources (locations). If unchecked, they will be sorted by their name. - Material cards appear sorted by their resources (locations). -If unchecked, they will be sorted by their name. + Cartões de material aparecem classificados por seus recursos (locais). +Se desmarcado, eles serão classificados por seus nomes. @@ -1542,12 +1542,12 @@ If unchecked, they will be sorted by their name. Mystran - Mystran + Mystran Mystran binary - Mystran binary + Mystran binário @@ -1557,12 +1557,12 @@ If unchecked, they will be sorted by their name. Mystran binary path - Mystran binary path + Caminho binário do Mystran Leave blank to use default Mystran binary file location - Leave blank to use default Mystran binary file location + Deixe em branco para usar o local do arquivo binário padrão do Mystran @@ -1572,7 +1572,7 @@ If unchecked, they will be sorted by their name. Write comments to input file - Write comments to input file + Escrever comentários para o arquivo de entrada @@ -1636,22 +1636,22 @@ Especifique outro arquivo, por favor. Iteration solver with SOR preconditioning (-sorcg) - Iteration solver with SOR preconditioning (-sorcg) + Solver de iteração com pré-condicionamento SOR (-sorcg) Iteration solver with SIC preconditioning (-siccg) - Iteration solver with SIC preconditioning (-siccg) + Solver de iteração com pré-condicionamento SIC (-sorcg) Simple Cholesky solver (-choly) - Simple Cholesky solver (-choly) + Solver simples de Cholesky (-choly) Max places in stiffness matrix - Max places in stiffness matrix + Máximo de lugares na matriz de rigidez @@ -1659,15 +1659,15 @@ Especifique outro arquivo, por favor. You might need to increase this when using the Cholesky solver and you get the error message that "MAXGS" needs to be increased. - Maximal places in stiffnes matrix. -You might need to increase this when using the -Cholesky solver and you get the error message -that "MAXGS" needs to be increased. + Locais máximos na matriz de rigidez. +Você pode precisar aumentar isso ao usar o +Solver Cholesky e você receberá uma mensagem de erro +que "MAXGS" precisa ser aumentada. Max places in coincidence vector - Max places in coincidence vector + Máximo de lugares no vetor de coincidência @@ -1678,13 +1678,13 @@ that "MAXGS" needs to be increased. You might need to increase this when using an iterative solver and you get the error message that "MAXKOI" needs to be increased. - Maximal places in coincidence vector. -(number of knots per element times - number of finite elements) + Locais máximos no vetor de coincidência. +(número de nós por elemento vezes + número de elementos finitos) -You might need to increase this when using an -iterative solver and you get the error message -that "MAXKOI" needs to be increased. +Talvez seja necessário aumentar isso ao usar um +solver iterativo e receberá uma mensagem de erro +que "MAXKOI" precisa ser aumentada. @@ -1697,10 +1697,10 @@ that "MAXKOI" needs to be increased. '%1' does not exist! Specify another file please. - The specified z88r executable + O executável z88r especificado '%1' - does not exist! -Specify another file please. + não existe! +Especifique outro arquivo, por favor. @@ -1711,12 +1711,12 @@ Specify another file please. You must specify the path to the z88r.exe! - You must specify the path to the z88r.exe! + Você deve especificar o caminho para o z88r.exe! You must specify the path to the z88r! - You must specify the path to the z88r! + Você deve especificar o caminho para o z88r! @@ -1977,13 +1977,13 @@ Specify another file please. Only one face in object! - moved to master face - Only one face in object! - moved to master face + Apenas uma face no objeto! - movida para face mestre Only one master face and one slave face for a contact constraint! - Only one master face and one slave face for a contact constraint! + Apenas uma face mestre e uma face subordinada para restrição de contato! @@ -1997,7 +1997,7 @@ Specify another file please. Only one slave face for a contact constraint! - Only one slave face for a contact constraint! + Apenas uma face subordinada para restrições de contato! @@ -2016,12 +2016,12 @@ Specify another file please. Only one master for a contact constraint! - Only one master for a contact constraint! + Apenas um mestre para restrições de contato! Only one master face for a contact constraint! - Only one master face for a contact constraint! + Apenas uma face mestre para restrições de contato! @@ -2050,7 +2050,7 @@ Specify another file please. Only one type of selection (vertex,face or edge) per constraint allowed! - Only one type of selection (vertex,face or edge) per constraint allowed! + Apenas um tipo de seleção (vértice, face ou aresta) por restrição permitida! @@ -2079,7 +2079,7 @@ Specify another file please. Only one type of selection (vertex,face or edge) per constraint allowed! - Only one type of selection (vertex,face or edge) per constraint allowed! + Apenas um tipo de seleção (vértice, face ou aresta) por restrição permitida! @@ -2102,12 +2102,12 @@ Specify another file please. select boundary type, faces and set value - select boundary type, faces and set value + selecione o tipo de limite, faces e definir valor Intensity [0~1] - Intensity [0~1] + Intensidade [0~1] @@ -2117,12 +2117,12 @@ Specify another file please. Length Scale[m] - Length Scale[m] + Escala de comprimento [m] Viscosity Ratio [1] - Viscosity Ratio [1] + Proporção de Viscosidade [1] @@ -2143,7 +2143,7 @@ Specify another file please. Empty selection - Empty selection + Limpar seleção @@ -2208,7 +2208,7 @@ Specify another file please. Only one type of selection (vertex,face or edge) per constraint allowed! - Only one type of selection (vertex,face or edge) per constraint allowed! + Apenas um tipo de seleção (vértice, face ou aresta) por restrição permitida! @@ -2237,7 +2237,7 @@ Specify another file please. Only one type of selection (vertex,face or edge) per constraint allowed! - Only one type of selection (vertex,face or edge) per constraint allowed! + Apenas um tipo de seleção (vértice, face ou aresta) por restrição permitida! @@ -2325,7 +2325,7 @@ Specify another file please. Only one face can be selected for a plane rotation constraint! - Only one face can be selected for a plane rotation constraint! + Apenas uma face pode ser selecionada para uma restrição de rotação de plano! @@ -2449,12 +2449,12 @@ Specify another file please. Constraint update error - Constraint update error + Erro de atualização de restrição The transformable faces have changed. Please add only the transformable faces and remove non-transformable faces! - The transformable faces have changed. Please add only the transformable faces and remove non-transformable faces! + As faces transformáveis mudaram. Por favor, adicione apenas as faces transformáveis e remova as faces não-transformáveis! @@ -2480,7 +2480,7 @@ Specify another file please. Only one face for rectangular transform constraint! - Only one face for rectangular transform constraint! + Apenas uma face para restrição de transformação retangular! @@ -2491,7 +2491,7 @@ Specify another file please. Only one face for transform constraint! - Only one face for transform constraint! + Apenas uma face para restrições de transformação! @@ -2506,7 +2506,7 @@ Specify another file please. Only transformable faces can be selected! Apply displacement constraint to surface first then apply constraint to surface - Only transformable faces can be selected! Apply displacement constraint to surface first then apply constraint to surface + Apenas faces transformáveis podem ser selecionadas! Aplique a restrição de deslocamento à superfície primeiro e então aplique a restrição à superfície @@ -2522,7 +2522,7 @@ Specify another file please. Clip region, choose implicit function - Clip region, choose implicit function + Região de recorte, escolha função implícita @@ -2530,7 +2530,7 @@ Specify another file please. Function cut, choose implicit function - Function cut, choose implicit function + Função cortar, escolha função implícita @@ -2538,7 +2538,7 @@ Specify another file please. Data along a line options - Data along a line options + Dados ao longo de uma linha de opções @@ -2552,12 +2552,12 @@ Specify another file please. Data at point options - Data at point options + Opções de dados no ponto %1 at (%2; %3; %4) is: %5 %6 - %1 at (%2; %3; %4) is: %5 %6 + %1 em (%2; %3; %4) é: %5 %6 @@ -2565,7 +2565,7 @@ Specify another file please. Result display options - Result display options + Opções de exibição de resultados @@ -2573,7 +2573,7 @@ Specify another file please. Implicit function - Implicit function + Função implícita @@ -2581,7 +2581,7 @@ Specify another file please. Scalar clip options - Scalar clip options + Opções de recorte escalar @@ -2589,7 +2589,7 @@ Specify another file please. Warp options - Warp options + Opções de dobra @@ -2627,7 +2627,7 @@ Specify another file please. FEM material - FEM material + Material FEM @@ -2644,7 +2644,7 @@ Specify another file please. Material card - Material card + Cartão de Material @@ -2654,7 +2654,7 @@ Specify another file please. Material name - Material name + Nome do material @@ -2671,17 +2671,17 @@ Specify another file please. Editing material - Editing material + Editando material use FreeCAD material editor - use FreeCAD material editor + Usar o editor de materiais do FreeCAD use this task panel - use this task panel + Usar este painel de tarefas @@ -2721,17 +2721,17 @@ Specify another file please. Fluidic Properties - Fluidic Properties + Propriedades do fluído Kinematic viscosity: - Kinematic viscosity: + Viscosidade cinemática: 0 m^2/s - 0 m^2/s + 0 m^2/s @@ -2767,23 +2767,23 @@ Specify another file please. 0 J/kg/K - 0 J/kg/K + 0 J/kg/K Vol Expansion Coeff - Vol Expansion Coeff + Coeficiente de Expansão Volumétrico Matrix Material - Matrix Material + Material da Matriz Choose - Choose + Escolha @@ -2812,7 +2812,7 @@ Specify another file please. Reinforcement Material - Reinforcement Material + Material de Reforço @@ -2825,17 +2825,17 @@ Specify another file please. Fluid Section Parameter - Fluid Section Parameter + Parâmetros da Seção de Fluídos Liquid Section Parameter - Liquid Section Parameter + Parâmetros da Seção de Líquidos Pipe Area - Pipe Area + Área do Tubo @@ -2851,39 +2851,39 @@ Specify another file please. 0 mm^2 - 0 mm^2 + 0 mm^2 Hydraulic Radius - Hydraulic Radius + Raio hidráulico Manning Coefficient - Manning Coefficient + Coeficiente de Manning Initial Area - Initial Area + Área Inicia Enlarged Area - Enlarged Area + Área Ampliada Contracted Area - Contracted Area + Área Retraída Inlet Pressure - Inlet Pressure + Pressão de Entrada @@ -2900,29 +2900,29 @@ Specify another file please. Inlet Mass Flow Rate - Inlet Mass Flow Rate + Taxa de Entrada de Massa Mass flow rate - Mass flow rate + Taxa de massa 0 kg/s - 0 kg/s + 0 kg/s Outlet Pressure - Outlet Pressure + Pressão de saída Outlet Mass Flow Rate - Outlet Mass Flow Rate + Taxa de Saída de Massa @@ -2931,77 +2931,77 @@ Specify another file please. Pipe Area - Pipe Area + Área do Tubo Entrance Area - Entrance Area + Área de Entrada Diaphragm Area - Diaphragm Area + Área do Diafragma Bend Radius/Pipe Diameter - Bend Radius/Pipe Diameter + Raio da Curva/Diâmetro do Tubo Bend Angle - Bend Angle + Ângulo de Curva Head loss coefficient - Head loss coefficient + Coeficiente de perda de cabeça Gate valve closing coefficient - Gate valve closing coefficient + Coeficiente de fechamento de válvula porta Pump Characteristic - Pump Characteristic + Características da Bomba Flow rate [mm^3/s] - Flow rate [mm^3/s] + Taxa de fluxo [mm^3/s] Head Loss[mm] - Head Loss[mm] + Perda da Cabeça [mm] Grain diameter - Grain diameter + Diâmetro do grão Cross section form factor - Cross section form factor + Fator de forma de seção transversal Gas Section Parameter - Gas Section Parameter + Parâmetros da Seção de Gás Open Channel Section Parameter - Open Channel Section Parameter + Parâmetros da Seção do Canal Aberto Tie parameter - Tie parameter + Amarrar parâmetro @@ -3022,12 +3022,12 @@ Specify another file please. Tolerance: - Tolerance: + Tolerância: Centrif parameter - Centrif parameter + Parâmetro de centrífuga @@ -3041,27 +3041,27 @@ Specify another file please. Rotation frequency f<sub>rot</sub> [rps] - Rotation frequency f<sub>rot</sub> [rps] + Frequência de rotação f<sub>rot</sub> [rps] revolutions per second - revolutions per second + rotações por segundo 0 1/s - 0 1/s + 0 1/s 1/s - 1/s + 1/s SectionPrint parameter - SectionPrint parameter + Parâmetros de impressão de seções @@ -3072,17 +3072,17 @@ Specify another file please. Constraint Properties - Constraint Properties + Propriedades de Restrição Body heat in W/kg: - Body heat in W/kg: + Calor do corpo em W/kg: Potential: - Potential: + Potencial: @@ -3113,43 +3113,43 @@ Specify another file please. unspecified - unspecified + não especificado Electric potential - Electric potential + Potencial elétrico To define a vector field - To define a vector field + Para definir um campo vetorial Vector Field - Vector Field + Campo Vetorial Imaginary part is only used for equations with a harmonic/oscillating driving force - Imaginary part is only used for equations -with a harmonic/oscillating driving force + Parte imaginária é usada apenas para equações +com forças atuantes harmônicas/oscilantes Real - Real + Real Imaginary - Imaginary + Imaginário @@ -3159,12 +3159,12 @@ with a harmonic/oscillating driving force Potential as specified above - Potential as specified above + Potencial como especificado acima Imaginary part of scalar potential - Imaginary part of scalar potential + Parte imaginária de potencial escalar @@ -3177,15 +3177,15 @@ with a harmonic/oscillating driving force Real part of potential x-component Note: has no effect if a solid was selected - Real part of potential x-component -Note: has no effect if a solid was selected + Parte real de componente-x potencial +Nota: não surge efeito se um sólido foi selecionado Imaginary part of potential x-component Note: has no effect if a solid was selected - Imaginary part of potential x-component -Note: has no effect if a solid was selected + Parte imaginária de componente-x potencial +Nota: não surge efeito se um sólido foi selecionado @@ -3198,15 +3198,15 @@ Note: has no effect if a solid was selected Real part of potential y-component Note: has no effect if a solid was selected - Real part of potential y-component -Note: has no effect if a solid was selected + Parte real de componente-y potencial +Nota: não surge efeito se um sólido foi selecionado Imaginary part of potential y-component Note: has no effect if a solid was selected - Imaginary part of potential y-component -Note: has no effect if a solid was selected + Parte imaginária de componente-y potencial +Nota: não surge efeito se um sólido foi selecionado @@ -3219,56 +3219,56 @@ Note: has no effect if a solid was selected Real part of potential z-component Note: has no effect if a solid was selected - Real part of potential z-component -Note: has no effect if a solid was selected + Parte real de componente-z potencial +Nota: não surge efeito se um sólido foi selecionado Imaginary part of potential z-component Note: has no effect if a solid was selected - Imaginary part of potential z-component -Note: has no effect if a solid was selected + Parte imaginária de componente-z potencial +Nota: não surge efeito se um sólido foi selecionado Whether the constraint defines a constant potential - Whether the constraint defines a constant potential + Se a restrição define um potencial constante Potential Constant - Potential Constant + Constante potencial Whether the constraint defines a farfield potential - Whether the constraint defines a farfield potential + Se a restrição define um potencial de Campo distante Farfield / Electric infinity - Farfield / Electric infinity + Campo distante / Infinidade Elétrica Whether the constraint is for the electric force - Whether the constraint is for the electric force + Se a restrição é para a força elétrica Calculate Electric Force - Calculate Electric Force + Calcular Força Elétrica Capacity Body: Enabled by 'Calculate Capacity Matrix' in Electrostatic equation - Capacity Body: + Capacidade do Corpo: Counter of the body (or face) with a capacitance - Counter of the body (or face) with a capacitance + Oposto do corpo (ou face) com uma capacitância @@ -3432,10 +3432,10 @@ Note: if a face was selected this will be the value Note: if a face was selected this will be the value in normal face direction settings for y and z will be ignored - Imaginary part of potential x-component -Note: if a face was selected this will be the value - in normal face direction - settings for y and z will be ignored + Parte imaginária de componente-x potencial +Nota: se uma face foi selecionada esse será o valor + em direção normal da face + ajustes para y e z serão ignorados @@ -3451,9 +3451,9 @@ Note: for 2D only setting for x is possible, Imaginary part of potential y-component Note: for 2D only setting for x is possible, setting for y will be ignored - Imaginary part of potential y-component -Note: for 2D only setting for x is possible, - setting for y will be ignored + Parte imaginária de componente-y potencial +Nota: para configuração apenas 2D para x é possível, + configuração para y será ignorada @@ -3468,7 +3468,7 @@ Note: for 2D only setting for x is possible, Imaginary part of potential x-component - Imaginary part of potential x-component + Parte imaginária de componente-x potencial @@ -3478,7 +3478,7 @@ Note: for 2D only setting for x is possible, Imaginary part of potential y-component - Imaginary part of potential y-component + Parte imaginária de componente-y potencial @@ -3490,7 +3490,7 @@ Note: for 2D only setting for x is possible, Imaginary part of potential z-component - Imaginary part of potential z-component + Parte imaginária de componente-z potencial @@ -4349,7 +4349,7 @@ For possible variables, see the description box below. Select slave face, click Add or Remove - Select slave face, click Add or Remove + Selecione uma face subordinada, clique Adicionar ou Remover @@ -5221,22 +5221,22 @@ used for the Elmer solver warp vectors - warp vectors + vetores de dobra Min warp - Min warp + Dobra mínima Warp factor - Warp factor + Fator de dobra Max warp - Max warp + Dobra máxima @@ -5380,117 +5380,119 @@ used for the Elmer solver &Electrostatic Constraints - + Fluid Constraints Fluid Constraints - + &Fluid Constraints &Fluid Constraints - + + Electromagnetic Constraints Electromagnetic Constraints - + + &Electromagnetic Constraints &Electromagnetic Constraints - + Geometrical Constraints Geometrical Constraints - + &Geometrical Constraints &Geometrical Constraints - + Mechanical Constraints Mechanical Constraints - + &Mechanical Constraints &Mechanical Constraints - + Thermal Constraints Thermal Constraints - + &Thermal Constraints &Thermal Constraints - + Constraints without solver Constraints without solver - + &Constraints without solver &Constraints without solver - + Overwrite Constants Overwrite Constants - + &Overwrite Constants &Overwrite Constants - + Mesh Malha - + M&esh M&esh - + Solve Resolver - + &Solve &Solve - + Results Resultados - + &Results &Results - + Filter functions Funções de filtro - + &Filter functions &Filter functions - + Utilities Utilitários @@ -5582,12 +5584,12 @@ used for the Elmer solver Constraint centrif - Constraint centrif + Restrição de centrífuga Creates a FEM constraint centrif - Creates a FEM constraint centrif + Cria uma restrição de centrífuga FEM @@ -5647,12 +5649,12 @@ used for the Elmer solver Constraint sectionprint - Constraint sectionprint + Restrições de impressão de seções Creates a FEM constraint sectionprint - Creates a FEM constraint sectionprint + Cria uma restrição de impressão de seções FEM @@ -5673,12 +5675,12 @@ used for the Elmer solver Constraint tie - Constraint tie + Restringir amarração Creates a FEM constraint tie - Creates a FEM constraint tie + Cria uma amarração restrita FEM diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts index 6b4e17b276..f0355d71b2 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts @@ -5382,117 +5382,119 @@ used for the Elmer solver &Electrostatic Constraints - + Fluid Constraints Fluid Constraints - + &Fluid Constraints &Fluid Constraints - + + Electromagnetic Constraints Electromagnetic Constraints - + + &Electromagnetic Constraints &Electromagnetic Constraints - + Geometrical Constraints Geometrical Constraints - + &Geometrical Constraints &Geometrical Constraints - + Mechanical Constraints Mechanical Constraints - + &Mechanical Constraints &Mechanical Constraints - + Thermal Constraints Thermal Constraints - + &Thermal Constraints &Thermal Constraints - + Constraints without solver Constraints without solver - + &Constraints without solver &Constraints without solver - + Overwrite Constants Overwrite Constants - + &Overwrite Constants &Overwrite Constants - + Mesh Malha - + M&esh M&esh - + Solve Resolver - + &Solve &Solve - + Results Results - + &Results &Results - + Filter functions Filter functions - + &Filter functions &Filter functions - + Utilities Utilitários diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts index dd3abc81d4..1b91f59f58 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts @@ -5382,117 +5382,119 @@ used for the Elmer solver &Electrostatic Constraints - + Fluid Constraints Fluid Constraints - + &Fluid Constraints &Fluid Constraints - + + Electromagnetic Constraints Electromagnetic Constraints - + + &Electromagnetic Constraints &Electromagnetic Constraints - + Geometrical Constraints Geometrical Constraints - + &Geometrical Constraints &Geometrical Constraints - + Mechanical Constraints Mechanical Constraints - + &Mechanical Constraints &Mechanical Constraints - + Thermal Constraints Thermal Constraints - + &Thermal Constraints &Thermal Constraints - + Constraints without solver Constraints without solver - + &Constraints without solver &Constraints without solver - + Overwrite Constants Overwrite Constants - + &Overwrite Constants &Overwrite Constants - + Mesh Mesh - + M&esh M&esh - + Solve Rezolvă - + &Solve &Solve - + Results Rezultate - + &Results &Results - + Filter functions Filtrează funcțiile - + &Filter functions &Filter functions - + Utilities Utilități diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts index d21d555616..87c71a22ba 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts @@ -5370,117 +5370,119 @@ used for the Elmer solver &Электростатические Ограничения - + Fluid Constraints Гидравлические Ограничения - + &Fluid Constraints &Гидравлические Ограничения - + + Electromagnetic Constraints Электромагнитные граничные условия - + + &Electromagnetic Constraints &Электромагнитные граничные условия - + Geometrical Constraints Геометрические Ограничения - + &Geometrical Constraints &Геометрические Ограничения - + Mechanical Constraints Механические ограничения - + &Mechanical Constraints &Механические ограничения - + Thermal Constraints Термальные ограничения - + &Thermal Constraints &Термальные ограничения - + Constraints without solver Ограничения без решения - + &Constraints without solver &Ограничения без решения - + Overwrite Constants Перезаписать константы - + &Overwrite Constants &Перезаписать константы - + Mesh Сеть - + M&esh &Сетка - + Solve Решить - + &Solve &Расчитать - + Results Результаты - + &Results &Результаты - + Filter functions Функции фильтра - + &Filter functions &Функции фильтра - + Utilities Вспомогательные diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts index 41dbd02297..d04df32873 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts @@ -5382,117 +5382,119 @@ used for the Elmer solver &Electrostatic Constraints - + Fluid Constraints Fluid Constraints - + &Fluid Constraints &Fluid Constraints - + + Electromagnetic Constraints Elektromagnetna omejila - + + &Electromagnetic Constraints &Elektromagnetna omejila - + Geometrical Constraints Geometrical Constraints - + &Geometrical Constraints &Geometrical Constraints - + Mechanical Constraints Mechanical Constraints - + &Mechanical Constraints &Mechanical Constraints - + Thermal Constraints Thermal Constraints - + &Thermal Constraints &Thermal Constraints - + Constraints without solver Constraints without solver - + &Constraints without solver &Constraints without solver - + Overwrite Constants Overwrite Constants - + &Overwrite Constants &Overwrite Constants - + Mesh Mesh - + M&esh M&esh - + Solve Reši - + &Solve &Solve - + Results Izid - + &Results &Results - + Filter functions Zmožnosti presejanja - + &Filter functions &Zmožnosti presejanja - + Utilities Pripomočki diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.ts index 5d6c7f60d4..79c9c82224 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sr-CS.ts @@ -5380,117 +5380,119 @@ used for the Elmer solver &Elektrostatička ograničenja - + Fluid Constraints Ograničenja fluida - + &Fluid Constraints &Ograničenja fluida - + + Electromagnetic Constraints Elektromagnetna ograničenja - + + &Electromagnetic Constraints &Elektromagnetna ograničenja - + Geometrical Constraints Geometrijska ograničenja - + &Geometrical Constraints &Geometrijska ograničenja - + Mechanical Constraints Mehanička ograničenja - + &Mechanical Constraints &Mehanička ograničenja - + Thermal Constraints Toplotna ograničenja - + &Thermal Constraints &Toplotna ograničenja - + Constraints without solver Constraints without solver - + &Constraints without solver &Constraints without solver - + Overwrite Constants Overwrite Constants - + &Overwrite Constants &Overwrite Constants - + Mesh Mesh - + M&esh M&esh - + Solve Reši - + &Solve &Solve - + Results Rezultati - + &Results &Results - + Filter functions Filter functions - + &Filter functions &Filter functions - + Utilities Korisni alati diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts index 6cad010bc6..633abb886b 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts @@ -5380,117 +5380,119 @@ used for the Elmer solver &Електростатичка ограничења - + Fluid Constraints Ограничења флуида - + &Fluid Constraints &Ограничења флуида - + + Electromagnetic Constraints Електромагнетна ограничења - + + &Electromagnetic Constraints &Електромагнетна ограничења - + Geometrical Constraints Геометријска ограничења - + &Geometrical Constraints &Геометријска ограничења - + Mechanical Constraints Механичка ограничења - + &Mechanical Constraints &Механичка ограничења - + Thermal Constraints Топлотна ограничења - + &Thermal Constraints &Топлотна ограничења - + Constraints without solver Constraints without solver - + &Constraints without solver &Constraints without solver - + Overwrite Constants Overwrite Constants - + &Overwrite Constants &Overwrite Constants - + Mesh Mesh - + M&esh M&esh - + Solve Реши - + &Solve &Solve - + Results Резултати - + &Results &Results - + Filter functions Filter functions - + &Filter functions &Filter functions - + Utilities Корисни алати diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts index 37c4a79b07..cfc0971fb7 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts @@ -5382,117 +5382,119 @@ used for the Elmer solver &Electrostatic Constraints - + Fluid Constraints Fluid Constraints - + &Fluid Constraints &Fluid Constraints - + + Electromagnetic Constraints Electromagnetic Constraints - + + &Electromagnetic Constraints &Electromagnetic Constraints - + Geometrical Constraints Geometrical Constraints - + &Geometrical Constraints &Geometrical Constraints - + Mechanical Constraints Mechanical Constraints - + &Mechanical Constraints &Mechanical Constraints - + Thermal Constraints Thermal Constraints - + &Thermal Constraints &Thermal Constraints - + Constraints without solver Constraints without solver - + &Constraints without solver &Constraints without solver - + Overwrite Constants Overwrite Constants - + &Overwrite Constants &Overwrite Constants - + Mesh Nät - + M&esh M&esh - + Solve Lös - + &Solve &Solve - + Results Resultat - + &Results &Resultat - + Filter functions Filter functions - + &Filter functions &Filter functions - + Utilities Verktyg diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts index 05636ef264..618b9a6cfe 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts @@ -5373,117 +5373,119 @@ used for the Elmer solver &Elektrostatik Kısıtlamalar - + Fluid Constraints Akışkan Kısıtlamaları - + &Fluid Constraints &Akışkan Kısıtlamaları - + + Electromagnetic Constraints Electromagnetic Constraints - + + &Electromagnetic Constraints &Electromagnetic Constraints - + Geometrical Constraints Geometrik Kısıtlamalar - + &Geometrical Constraints &Geometrik Kısıtlamalar - + Mechanical Constraints Mekanik Kısıtlamalar - + &Mechanical Constraints &Mekanik Kısıtlamalar - + Thermal Constraints Isıl Kısıtlamalar - + &Thermal Constraints Isıl Kısı&tlamalar - + Constraints without solver Çözücüsüz kısıtlamalar - + &Constraints without solver Çözü&cüsüz kısıtlamalar - + Overwrite Constants Sabit Değerlerin Üzerine Yaz - + &Overwrite Constants &Sabit Değerlerin Üzerine Yaz - + Mesh Mesh - + M&esh M&esh - + Solve Çözmek - + &Solve &Çöz - + Results Sonuçlar - + &Results Sonuçla&r - + Filter functions Süzgeç işlevleri - + &Filter functions &Süzgeç işlevleri - + Utilities Yard. Uygulamalar diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts index da97fce9f0..bcdd1dcedb 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts @@ -5383,117 +5383,119 @@ used for the Elmer solver &Electrostatic Constraints - + Fluid Constraints Fluid Constraints - + &Fluid Constraints &Fluid Constraints - + + Electromagnetic Constraints Електромагнітні обмеження - + + &Electromagnetic Constraints &Електромагнітні обмеження - + Geometrical Constraints Geometrical Constraints - + &Geometrical Constraints &Geometrical Constraints - + Mechanical Constraints Mechanical Constraints - + &Mechanical Constraints &Mechanical Constraints - + Thermal Constraints Thermal Constraints - + &Thermal Constraints &Thermal Constraints - + Constraints without solver Constraints without solver - + &Constraints without solver &Constraints without solver - + Overwrite Constants Overwrite Constants - + &Overwrite Constants &Overwrite Constants - + Mesh Сітка(Меш) - + M&esh M&esh - + Solve Розв’язати - + &Solve &Solve - + Results Results - + &Results &Results - + Filter functions Filter functions - + &Filter functions &Filter functions - + Utilities Утиліти diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts index eee75c6561..21227dd3a7 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts @@ -5382,117 +5382,119 @@ used for the Elmer solver &Electrostatic Constraints - + Fluid Constraints Fluid Constraints - + &Fluid Constraints &Fluid Constraints - + + Electromagnetic Constraints Electromagnetic Constraints - + + &Electromagnetic Constraints &Electromagnetic Constraints - + Geometrical Constraints Geometrical Constraints - + &Geometrical Constraints &Geometrical Constraints - + Mechanical Constraints Mechanical Constraints - + &Mechanical Constraints &Mechanical Constraints - + Thermal Constraints Thermal Constraints - + &Thermal Constraints &Thermal Constraints - + Constraints without solver Constraints without solver - + &Constraints without solver &Constraints without solver - + Overwrite Constants Overwrite Constants - + &Overwrite Constants &Overwrite Constants - + Mesh Mesh - + M&esh M&esh - + Solve Resol - + &Solve &Solve - + Results Results - + &Results &Results - + Filter functions Filter functions - + &Filter functions &Filter functions - + Utilities Utilitats diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts index f0b13b88cf..4cc8a0f321 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts @@ -5382,117 +5382,119 @@ used for the Elmer solver &Electrostatic Constraints - + Fluid Constraints 流体约束 - + &Fluid Constraints 流体约束(&F) - + + Electromagnetic Constraints Electromagnetic Constraints - + + &Electromagnetic Constraints &Electromagnetic Constraints - + Geometrical Constraints 几何约束 - + &Geometrical Constraints 几何约束(&G) - + Mechanical Constraints 力学约束 - + &Mechanical Constraints 力学约束(&M) - + Thermal Constraints Thermal Constraints - + &Thermal Constraints &Thermal Constraints - + Constraints without solver Constraints without solver - + &Constraints without solver &Constraints without solver - + Overwrite Constants Overwrite Constants - + &Overwrite Constants &Overwrite Constants - + Mesh 网格 - + M&esh 网格(&M) - + Solve 求解 - + &Solve 求解(&S) - + Results Results - + &Results 结果(&R) - + Filter functions Filter functions - + &Filter functions &Filter functions - + Utilities 实用程序 diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts index dfc362ddcf..b4ac27eced 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts @@ -5382,117 +5382,119 @@ used for the Elmer solver &Electrostatic Constraints - + Fluid Constraints Fluid Constraints - + &Fluid Constraints &Fluid Constraints - + + Electromagnetic Constraints Electromagnetic Constraints - + + &Electromagnetic Constraints &Electromagnetic Constraints - + Geometrical Constraints Geometrical Constraints - + &Geometrical Constraints &Geometrical Constraints - + Mechanical Constraints Mechanical Constraints - + &Mechanical Constraints &Mechanical Constraints - + Thermal Constraints Thermal Constraints - + &Thermal Constraints &Thermal Constraints - + Constraints without solver Constraints without solver - + &Constraints without solver &Constraints without solver - + Overwrite Constants Overwrite Constants - + &Overwrite Constants &Overwrite Constants - + Mesh Mesh - + M&esh 網格(&E) - + Solve 求解 - + &Solve 求解(&S) - + Results 結果 - + &Results 結果(&R) - + Filter functions 篩選功能 - + &Filter functions 篩選功能(&F) - + Utilities 實用工具 diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_ca.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ca.qm index 7f730f2451..c7b5e11f46 100644 Binary files a/src/Mod/Inspection/Gui/Resources/translations/Inspection_ca.qm and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ca.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_ca.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ca.ts index e0d34ea289..5f85df56eb 100644 --- a/src/Mod/Inspection/Gui/Resources/translations/Inspection_ca.ts +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_ca.ts @@ -11,12 +11,12 @@ Inspection... - Inspection... + Inspecció... Get distance information - Get distance information + Aconsegueix la informació de la distància @@ -29,13 +29,13 @@ Visual inspection... - Visual inspection... + Inspecció visual... Visual inspection - Visual inspection + Inspecció visual @@ -43,7 +43,7 @@ Visual Inspection - Visual Inspection + Inspecció Visual @@ -51,7 +51,7 @@ Visual Inspection - Visual Inspection + Inspecció Visual @@ -67,7 +67,7 @@ Nominal - Nominal + Nominal @@ -77,7 +77,7 @@ Search distance - Search distance + Cerca la distància @@ -96,12 +96,12 @@ Remove annotations - Remove annotations + Elimina les anotacions Do you want to remove all annotations? - Do you want to remove all annotations? + Vols eliminar totes les anotacions? @@ -116,18 +116,18 @@ Distance: > %1 - Distance: > %1 + Distància: > %1 Distance: < %1 - Distance: < %1 + Distància: < %1 Distance: %1 - Distance: %1 + Distància: %1 diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_nl.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_nl.qm index 396bf19979..0753ac76b4 100644 Binary files a/src/Mod/Inspection/Gui/Resources/translations/Inspection_nl.qm and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_nl.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_nl.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_nl.ts index 3a8b0f7db4..d009e1b88f 100644 --- a/src/Mod/Inspection/Gui/Resources/translations/Inspection_nl.ts +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_nl.ts @@ -116,12 +116,12 @@ Distance: > %1 - Distance: > %1 + Afstand: > %1 Distance: < %1 - Distance: < %1 + Afstand: < %1 diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_tr.qm b/src/Mod/Inspection/Gui/Resources/translations/Inspection_tr.qm index b147961676..fafdc86478 100644 Binary files a/src/Mod/Inspection/Gui/Resources/translations/Inspection_tr.qm and b/src/Mod/Inspection/Gui/Resources/translations/Inspection_tr.qm differ diff --git a/src/Mod/Inspection/Gui/Resources/translations/Inspection_tr.ts b/src/Mod/Inspection/Gui/Resources/translations/Inspection_tr.ts index ca9e60eac3..58ebff8e22 100644 --- a/src/Mod/Inspection/Gui/Resources/translations/Inspection_tr.ts +++ b/src/Mod/Inspection/Gui/Resources/translations/Inspection_tr.ts @@ -11,12 +11,12 @@ Inspection... - Inspection... + İnceleme... Get distance information - Get distance information + Mesafe bilgisini al @@ -29,13 +29,13 @@ Visual inspection... - Visual inspection... + Görsel inceleme... Visual inspection - Visual inspection + Görsel inceleme @@ -43,7 +43,7 @@ Visual Inspection - Visual Inspection + Görsel inceleme @@ -51,12 +51,12 @@ Visual Inspection - Visual Inspection + Görsel inceleme Actual - Actual + Güncel @@ -67,7 +67,7 @@ Nominal - Nominal + Nominal @@ -77,7 +77,7 @@ Search distance - Search distance + Arama mesafesi @@ -96,12 +96,12 @@ Remove annotations - Remove annotations + Açıklamaları kaldır Do you want to remove all annotations? - Do you want to remove all annotations? + Tüm açıklamaları kaldırmak istiyor musunuz? @@ -116,18 +116,18 @@ Distance: > %1 - Distance: > %1 + Mesafe: > %1 Distance: < %1 - Distance: < %1 + Mesafe: < %1 Distance: %1 - Distance: %1 + Mesafe: %1 diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts index c5b6f4b321..05bf53598d 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_ca.ts @@ -1664,7 +1664,7 @@ Si angle de la cara < l'angle de plec, s'utilitza un ombrejat suau Remesh by Gmsh - Remesh by Gmsh + Remalla per Gmsh @@ -2024,7 +2024,7 @@ Si angle de la cara < l'angle de plec, s'utilitza un ombrejat suau Mesh info - Mesh info + Info de la malla @@ -2140,7 +2140,7 @@ Visiteu http://www.openscad.org/index.html per a instal·lar-lo. NASTRAN - NASTRAN + NASTRAN @@ -2206,7 +2206,7 @@ Visiteu http://www.openscad.org/index.html per a instal·lar-lo. 3D Manufacturing Format - 3D Manufacturing Format + Format de fabricació 3D @@ -2281,7 +2281,7 @@ Visiteu http://www.openscad.org/index.html per a instal·lar-lo. Display colors - Display colors + Mostra els colors @@ -2350,7 +2350,7 @@ Visiteu http://www.openscad.org/index.html per a instal·lar-lo. Mesh modify - Mesh modify + Modifica la malla @@ -2360,7 +2360,7 @@ Visiteu http://www.openscad.org/index.html per a instal·lar-lo. Mesh cutting - Mesh cutting + Tall de la malla diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts index 922945bd7f..fc74698b88 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_nl.ts @@ -2012,7 +2012,7 @@ tot een gladder uiterlijk leidt. Number of facets: - Number of facets: + Aantal facetten: @@ -2289,7 +2289,7 @@ Gelieve naar http://www.openscad.org/index.html te gaan om het te installeren. Display colors - Display colors + Kleuren weergeven diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-AR.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-AR.ts index db40cc5b59..f3d28367ef 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-AR.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_es-AR.ts @@ -267,7 +267,7 @@ Este comando solo funciona con un objeto de 'malla', no con una cara o superfici Start - Iniciar + Inicio diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.qm index 6244ea0ec6..60fad0dc79 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.ts index e8b577eb21..24baff7d8e 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_ca.ts @@ -231,7 +231,7 @@ Open... - Obrir... + Obre... diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.qm index e745cdc236..7ed325c33c 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts index d05951fb1d..8910a75914 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pl.ts @@ -345,12 +345,12 @@ Refine Shape Feature - Udoskonalenie cechy kształtu + Udoskonal kształt cechy Create Refine Shape Feature - Stwórz udoskonaloną cechę kształtu + Tworzy udoskonaloną cechę kształtu diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.qm index 2808ad12af..089734a0ad 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.ts index 12219362be..459963912b 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_pt-BR.ts @@ -67,37 +67,37 @@ Send to OpenSCAD via: - Send to OpenSCAD via: + Envie ao OpenScad via: The transfer mechanism for getting data to and from OpenSCAD - The transfer mechanism for getting data to and from OpenSCAD + O mecanismo de transferência para obter dados do OpenSCAD Standard temp directory - Standard temp directory + Diretório temporário padrão User-specified directory - User-specified directory + Diretório especificado pelo usuário stdout pipe (requires OpenSCAD >= 2021.1) - stdout pipe (requires OpenSCAD >= 2021.1) + tubo stdout (requer OpenSCAD >= 2021.1) Transfer directory - Transfer directory + Diretório de transferência The path to the directory for transferring files to and from OpenSCAD - The path to the directory for transferring files to and from OpenSCAD + O caminho para o diretório para transferir arquivos de e para o OpenSCAD @@ -107,17 +107,17 @@ Maximum fragment size - Maximum fragment size + Tamanho máximo de um fragmento angle (fa) - angle (fa) + ângulo (graus) Convexity - Convexity + Convexidade @@ -168,33 +168,33 @@ It looks like you may be using a Snap version of OpenSCAD. - It looks like you may be using a Snap version of OpenSCAD. + Parece que você pode estar usando uma versão Snap do OpenSCAD. If OpenSCAD execution fails to load the temporary file, use FreeCAD's OpenSCAD Workbench Preferences to change the transfer mechanism. - If OpenSCAD execution fails to load the temporary file, use FreeCAD's OpenSCAD Workbench Preferences to change the transfer mechanism. + Se a execução do OpenSCAD falhar ao carregar o arquivo temporário, use as preferências do OpenSCAD OpenSCAD Workbench para alterar o mecanismo de transferência. It looks like you may be using a sandboxed version of FreeCAD. - It looks like you may be using a sandboxed version of FreeCAD. + Parece que você pode estar usando uma versão Snap do OpenSCAD. Unable to explode %s - Unable to explode %s + Não é possível explodir %s Convert Edges to Faces - Convert Edges to Faces + Converter arestas em faces Please select 3 objects first - Please select 3 objects first + Por favor, selecione 3 objetos @@ -226,7 +226,7 @@ Clear code - Clear code + Limpar código @@ -236,68 +236,68 @@ Save... - Save... + Salve... as Mesh - as Mesh + como malha Add OpenSCAD Element - Add OpenSCAD Element + Adicionar elemento OpenSCAD Open file - Open file + Abrir arquivo OpenSCAD Files - OpenSCAD Files + Arquivos OpenSCAD Save file - Save file + Salvar arquivo Perform - Perform + Executar Mesh Boolean - Mesh Boolean + Booleano de malha Minkowski sum - Minkowski sum + Sumário Minkowski OpenSCAD file contains both 2D and 3D shapes. That is not supported in this importer, all shapes must have the same dimensionality. - OpenSCAD file contains both 2D and 3D shapes. That is not supported in this importer, all shapes must have the same dimensionality. + O arquivo OpenSCAD contém formas 2D e 3D. Isso não é suportado neste importador, todas as formas devem ter a mesma dimensão. Error: either all shapes must be 2D or all shapes must be 3D - Error: either all shapes must be 2D or all shapes must be 3D + Erro: ou todas as formas devem ser 2D ou todas as formas devem ser 3D Unsupported Function - Unsupported Function + Função não suportada @@ -311,12 +311,12 @@ Explode Group - Explode Group + Explodir grupo Remove fusion, apply placement to children, and color randomly - Remove fusion, apply placement to children, and color randomly + Remover a fusão, aplicar localizador aos descendentes e cor aleatoriamente @@ -324,12 +324,12 @@ Color Shapes - Color Shapes + Colorir formas Color Shapes by validity and type - Color Shapes by validity and type + Colorir as formas pelo tipo e validade @@ -337,7 +337,7 @@ Convert Edges To Faces - Convert Edges To Faces + Converter arestas em faces @@ -345,12 +345,12 @@ Refine Shape Feature - Refine Shape Feature + Refinamento de forma Create Refine Shape Feature - Create Refine Shape Feature + Criar um objeto de refinamento de forma @@ -358,12 +358,12 @@ Mirror Mesh Feature... - Mirror Mesh Feature... + Criar Espelhamento de Malha... Create Mirror Mesh Feature - Create Mirror Mesh Feature + Criar Espelhamento de Malha @@ -371,12 +371,12 @@ Scale Mesh Feature... - Scale Mesh Feature... + Redimensionar malha... Create Scale Mesh Feature - Create Scale Mesh Feature + Criar redimensionamento de malha @@ -384,12 +384,12 @@ Resize Mesh Feature... - Resize Mesh Feature... + Redimensionar malha... Create Resize Mesh Feature - Create Resize Mesh Feature + Criar redimensionamento de malha @@ -397,12 +397,12 @@ Increase Tolerance Feature - Increase Tolerance Feature + Aumentar característica de Tolerância Create Feature that allows increasing the tolerance - Create Feature that allows increasing the tolerance + Crie um objeto que permite aumentar a tolerância @@ -410,7 +410,7 @@ Expand Placements - Expand Placements + Expandir Colocações @@ -423,7 +423,7 @@ Replace Object - Replace Object + Substituir objeto @@ -436,12 +436,12 @@ Remove Objects and their Children - Remove Objects and their Children + Remover objetos e seus descendentes Removes the selected objects and all children that are not referenced from other objects - Removes the selected objects and all children that are not referenced from other objects + Remove os objetos selecionados e todos os seus descendentes que não são referenciados por outros objetos @@ -449,12 +449,12 @@ Add OpenSCAD Element... - Add OpenSCAD Element... + Adicionar um elemento OpenSCAD... Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary - Add an OpenSCAD element by entering OpenSCAD code and executing the OpenSCAD binary + Adicionar um elemento OpenSCAD inserindo código OpenSCAD e executando o binário de OpenSCAD @@ -501,7 +501,7 @@ Minkowski sum - Minkowski sum + Sumário Minkowski diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ca.ts b/src/Mod/Part/Gui/Resources/translations/Part_ca.ts index b323da6cf1..d3282ea49d 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ca.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ca.ts @@ -5342,7 +5342,7 @@ Comprovacions d'operació booleana individual: %n invalid shapes. - %n Formes invàlides. + %n forma invàlida. %n invalid shapes. @@ -6266,7 +6266,7 @@ Do you want to continue? Bad selection - Bad selection + Mala selecció @@ -6276,17 +6276,17 @@ Do you want to continue? Select at least two objects, or one or more compounds - Select at least two objects, or one or more compounds + Selecciona almenys dos objectes, o un o més compostos Select base object, then the object to embed, and then invoke this tool. - Select base object, then the object to embed, and then invoke this tool. + Selecciona l'objecte base, després l'objecte a incrustar, i després invoca aquesta eina. Select the object to make a cutout in, then the object that should fit into the cutout, and then invoke this tool. - Select the object to make a cutout in, then the object that should fit into the cutout, and then invoke this tool. + Seleccioneu l'objecte per fer un retall, després l'objecte que hauria d'encaixar al retall i després invoqueu aquesta eina. @@ -6294,12 +6294,12 @@ Do you want to continue? Connect objects - Connect objects + Connecta objectes Fuses objects, taking care to preserve voids. - Fuses objects, taking care to preserve voids. + Fusiona objectes, tenint cura de preservar els buits. @@ -6307,12 +6307,12 @@ Do you want to continue? Embed object - Embed object + Incrusta objectes Fuses one object into another, taking care to preserve voids. - Fuses one object into another, taking care to preserve voids. + Fusiona un objecte amb un altre, tenint cura de preservar els buits. @@ -6320,12 +6320,12 @@ Do you want to continue? Cutout for object - Cutout for object + Retall per a objecte Makes a cutout in one object to fit another object. - Makes a cutout in one object to fit another object. + Fa un retall en un objecte per adaptar-se a un altre objecte. @@ -6353,7 +6353,7 @@ Do you want to continue? Bad selection - Bad selection + Mala selecció @@ -6367,7 +6367,7 @@ Do you want to continue? Select at least two objects, or one or more compounds. If only one compound is selected, the compounded shapes will be intersected between each other (otherwise, compounds with self-intersections are invalid). - Select at least two objects, or one or more compounds. If only one compound is selected, the compounded shapes will be intersected between each other (otherwise, compounds with self-intersections are invalid). + Selecciona almenys dos objectes o un o més compostos. Si només se selecciona un compost, les formes compostes es tallaran entre si (en cas contrari, els compostos amb autointerseccions no són vàlids). @@ -6389,21 +6389,21 @@ Do you want to continue? area, or length, or by choosing specific items. If a second object is selected, it will be used as reference, for example, for collision or distance filtering. - Filter out objects from a selected compound by characteristics like volume, -area, or length, or by choosing specific items. -If a second object is selected, it will be used as reference, for example, -for collision or distance filtering. + Filtra els objectes d'un compost seleccionat per característiques com el volum, +àrea, o longitud, o escollint elements específics. +Si se selecciona un segon objecte, s'utilitzarà com a referència, per exemple, +per al filtratge de col·lisions o distància. First select a shape that is a compound. If a second object is selected (optional) it will be treated as a stencil. - First select a shape that is a compound. If a second object is selected (optional) it will be treated as a stencil. + Primer seleccioneu una forma que sigui composta. Si se selecciona un segon objecte (opcional), es tractarà com una plantilla. Bad selection - Bad selection + Mala selecció @@ -6421,24 +6421,24 @@ for collision or distance filtering. Explode compound - Explode compound + Esclata el compost Split up a compound of shapes into separate objects. It will create a 'Compound Filter' for each shape. - Split up a compound of shapes into separate objects. -It will create a 'Compound Filter' for each shape. + Divideix un compost de formes en objectes separats. +Crearà un "Filtre compost" per a cada forma. First select a shape that is a compound. - First select a shape that is a compound. + Primer selecciona una forma que sigui un compost. Bad selection - Bad selection + Mala selecció @@ -6446,22 +6446,22 @@ It will create a 'Compound Filter' for each shape. No object named {} - No object named {} + Cap objecte anomenat {} Failed to parse link (more than one colon encountered) - Failed to parse link (more than one colon encountered) + No s'ha pogut analitzar l'enllaç (s'ha trobat més d'un símbol de dos punts) Object {} is neither movable nor attachable, can't edit attachment - Object {} is neither movable nor attachable, can't edit attachment + L'objecte {} no es pot moure ni es pot adjuntar, no es pot editar el fitxer adjunt {} is not attachable. You can still use attachment editor dialog to align the object, but the attachment won't be parametric. - {} is not attachable. You can still use attachment editor dialog to align the object, but the attachment won't be parametric. + {} no es pot adjuntar. Encara podeu utilitzar el diàleg de l'editor de fitxers adjunts per alinear l'objecte, però el fitxer adjunt no serà paramètric. @@ -6478,27 +6478,27 @@ It will create a 'Compound Filter' for each shape. Edit attachment of {} - Edit attachment of {} + Edita arxiu adjunt Ignored. Can't attach object to itself! - Ignored. Can't attach object to itself! + Ignorat. No podeu adjuntar un objecte a si mateix! {} depends on object being attached, can't use it for attachment - {} depends on object being attached, can't use it for attachment + {} depén de l'objecte adjuntat, no es pot utilitzar per a adjuntar {} (add {}) - {} (add {}) + {} (afegeix {}) {} (add more references) - {} (add more references) + {} (afegeix més referències) @@ -6508,7 +6508,7 @@ It will create a 'Compound Filter' for each shape. Reference{} - Reference{} + Referència{} @@ -6518,7 +6518,7 @@ It will create a 'Compound Filter' for each shape. Failed to resolve links. {} - Failed to resolve links. {} + No s'ha pogut solucionar els enllaços. {} @@ -6528,12 +6528,12 @@ It will create a 'Compound Filter' for each shape. Attached with mode {} - Attached with mode {} + S'adjunta amb mode {} Error: {} - Error: {} + Error: {} @@ -6551,12 +6551,12 @@ It will create a 'Compound Filter' for each shape. Attachment... - Attachment... + Adjunt... Edit attachment of selected object. - Edit attachment of selected object. + Edita l'adjunt de l'objecte seleccionat. @@ -6564,7 +6564,7 @@ It will create a 'Compound Filter' for each shape. Shape type - Shape type + Tipus de forma @@ -6599,7 +6599,7 @@ It will create a 'Compound Filter' for each shape. CompSolids - CompSolids + Sòlid compost @@ -6639,7 +6639,7 @@ It will create a 'Compound Filter' for each shape. Curve center - Curve center + Centre de la corba @@ -6654,7 +6654,7 @@ It will create a 'Compound Filter' for each shape. Is closed - Is closed + És tancat @@ -6664,12 +6664,12 @@ It will create a 'Compound Filter' for each shape. Global center of mass - Global center of mass + Centre de masses global Global placement - Global placement + Posició global @@ -6682,7 +6682,7 @@ It will create a 'Compound Filter' for each shape. Boolean fragments - Boolean fragments + Fragments booleans @@ -6702,16 +6702,16 @@ Es pot utilitzar un "Filtre compost" per extreure els talls individuals. Slice to compound - Slice to compound + Llesca a la composició Slice a selected object by using other objects as cutting tools. The resulting pieces will be stored in a compound. A 'Compound Filter' can be used to extract the individual slices. - Slice a selected object by using other objects as cutting tools. -The resulting pieces will be stored in a compound. -A 'Compound Filter' can be used to extract the individual slices. + Talla un objecte seleccionat utilitzant altres objectes com a eines de tall. +Les peces resultants s'emmagatzemaran en un compost. +Es pot utilitzar un "Filtre compost" per extreure les rodanxes individuals. @@ -6734,7 +6734,7 @@ Crearà un «Filtre compost» per a cada tall. Boolean XOR - Boolean XOR + XOR booleà @@ -6742,10 +6742,10 @@ Crearà un «Filtre compost» per a cada tall. or with the shapes inside a compound. This means the overlapping volumes of the shapes will be removed. A 'Compound Filter' can be used to extract the remaining pieces. - Perform an 'exclusive OR' boolean operation with two or more selected objects, -or with the shapes inside a compound. -This means the overlapping volumes of the shapes will be removed. -A 'Compound Filter' can be used to extract the remaining pieces. + Fes una operació booleana "O exclusiu" amb dos o més objectes seleccionats, +o amb les formes dins d'un compost. +Això significa que s'eliminaran els volums superposats de les formes. +Es pot utilitzar un "Filtre compost" per extreure les peces restants. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts index d582c97541..74694f17a4 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts @@ -1841,12 +1841,12 @@ en sus componentes X, Y y Z. Mirroring... - Duplicar... + Reflejar... Mirroring a selected shape - Duplicación de una forma seleccionada + Reflejar una forma seleccionada @@ -5348,7 +5348,7 @@ Comprobación de operaciones booleanas individuales: %n invalid shapes. - %n formas no válidas. + %n formas inválidas. %n invalid shapes. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts index 80a5416f8d..b8e6200118 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts @@ -1678,7 +1678,7 @@ décomposée en ses composantes X, Y et Z. Export CAD... - Exportation CAO... + Exporter un fichier de CAO... diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts index d7855e25ca..fb559424d8 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts @@ -680,7 +680,7 @@ Folding AttachmentPlane mode caption - Składanie + Składany @@ -877,7 +877,7 @@ Folding Attachment3D mode caption - Składanie + Składany @@ -1159,7 +1159,7 @@ Box selection - Zaznacz obszar + Zaznacz obszarem @@ -1208,7 +1208,7 @@ Measure Angular - Wymiarowanie kątowe + Pomiar kątowy @@ -1244,7 +1244,7 @@ Measure Linear - Wymiarowanie liniowe + Pomiar liniowy @@ -1266,7 +1266,7 @@ pomiędzy dwoma ich wierzchołkami. Refresh - Odśwież + Odśwież pomiary @@ -1286,13 +1286,13 @@ w przypadku przesunięcia punktów pomiarowych. Toggle 3D - Przełącz widok 3D + Włącz / wyłącz widok pomiarów 3D Toggle on and off all direct dimensions, including angular. - Przełącz i wyłącz wszystkie wymiary bezpośrednie, + Włącza i wyłącza wszystkie pomiary bezpośrednie, w tym kątowe. @@ -1306,13 +1306,13 @@ w tym kątowe. Toggle All - Przełącz widoczność wymiarów + Przełącz widoczność pomiarów Toggle on and off all currently visible dimensions, direct, orthogonal, and angular. - Przełącz i wyłącz wszystkie aktualnie widoczne wymiary, + Włącza i wyłącza wszystkie aktualnie widoczne pomiary, bezpośrednie, ortogonalne i kątowe. @@ -1326,14 +1326,14 @@ bezpośrednie, ortogonalne i kątowe. Toggle Delta - Przełącz Deltę + Włącz / wyłącz widok pomiarów przyrostowych Toggle on and off all orthogonal dimensions, meaning that a direct dimension will be decomposed into its X, Y, and Z components. - Przełącz i wyłącz wszystkie wymiary ortogonalne, + Włącza i wyłącza wszystkie pomiary ortogonalne, co oznacza, że wymiar bezpośredni zostanie podzielony na jego składowe X, Y i Z. @@ -1348,7 +1348,7 @@ na jego składowe X, Y i Z. Boolean... - Logiczne ... + Operacja logiczna ... @@ -1678,7 +1678,7 @@ na jego składowe X, Y i Z. Export CAD... - Eksport projektu do CAD... + Eksport projektu do CAD ... @@ -1917,7 +1917,7 @@ na jego składowe X, Y i Z. Create selectable points object from selected geometric object - Tworzenie obiektu punktów wybieralnych z zaznaczonego obiektu geometrycznego + Tworzy obiekt punktów wybrany z zaznaczonego obiektu geometrycznego @@ -2219,7 +2219,7 @@ Ujęcie widoku określa kierunek rzutowania. Create a non-parametric copy with transformed placement - Utwórz kopię nieparametryczną z przekształconym umiejscowieniem + Tworzy kopię nieparametryczną z przekształconym umiejscowieniem @@ -2407,7 +2407,7 @@ Ujęcie widoku określa kierunek rzutowania. Attachment mode: - Tryb mocowania: + Tryb dołączenia: @@ -2926,7 +2926,7 @@ Jeśli obie długości są równe zero, używana jest wartość wielkości kieru Selecting... - Wybieranie... + Wybieranie ... @@ -4214,7 +4214,7 @@ podczas odczytu pliku (wolniejsze, ale dokładniejsze). Measure - Wymiarowanie + Pomiary @@ -4956,7 +4956,7 @@ only created cuts will be visible Attachment mode: - Tryb mocowania: + Tryb dołączenia: @@ -5057,7 +5057,7 @@ dołączanego obiektu. Not attached - Nie dołączony + Nie dołączono @@ -5087,7 +5087,7 @@ dołączanego obiektu. Selecting... - Wybieranie... + Wybieranie ... @@ -5131,7 +5131,7 @@ dołączanego obiektu. Skip settings page - Pomiń stronę ustawień + Pomiń ustawienia @@ -5417,7 +5417,7 @@ przez przeciągnięcie prostokąta zaznaczenia w oknie widoku 3D Box selection - Zaznacz obszar + Zaznacz obszarem @@ -5479,7 +5479,7 @@ przez przeciągnięcie prostokąta zaznaczenia w oknie widoku 3D Arc - Wzdłuż łuku + Łuk @@ -6096,7 +6096,7 @@ Do you want to continue? Selections - Zaznaczenia + Wybór: @@ -6245,7 +6245,7 @@ Do you want to continue? Measure - Wymiarowanie + Pomiary @@ -6380,7 +6380,9 @@ Do you want to continue? Select at least two objects, or one or more compounds. If only one compound is selected, the compounded shapes will be intersected between each other (otherwise, compounds with self-intersections are invalid). - Wybierz co najmniej dwa obiekty bądź jeden lub więcej złożonych kształtów. Jeśli wybrany zostanie tylko jeden kształt złożony, jego części składowe zostaną przecięte między sobą (w przeciwnym razie, kształt złożony z własnymi przecięciami jest nieprawidłowy). + Wybierz co najmniej dwa obiekty bądź jeden lub więcej złożonych kształtów. +Jeśli wybrany zostanie tylko jeden kształt złożony, jego części składowe zostaną przecięte między sobą +(w przeciwnym razie, kształt złożony z własnymi przecięciami jest nieprawidłowy). @@ -6526,7 +6528,7 @@ Stworzy to "Filtr złożeń” dla każdego kształtu. Selecting... - Wybieranie... + Wybieranie ... @@ -6536,7 +6538,7 @@ Stworzy to "Filtr złożeń” dla każdego kształtu. Not attached - Nie dołączony + Nie dołączono @@ -6716,16 +6718,16 @@ oryginalnych kształtów. Slice to compound - Rozbij na kształty złożone + Natnij na kształty złożenia Slice a selected object by using other objects as cutting tools. The resulting pieces will be stored in a compound. A 'Compound Filter' can be used to extract the individual slices. - Rozbij wybrany obiekt za pomocą innych obiektów jako narzędzia cięcia. + Rozbija wybrany obiekt za pomocą innych obiektów jako narzędzi cięcia. Wynikające z niego części będą przechowywane w złożeniu. -Filtr złożeń może być użyty do wydobycia pojedynczych plastrów. +Filtr złożeń może być użyty do wydobycia pojedynczych części. @@ -6733,7 +6735,7 @@ Filtr złożeń może być użyty do wydobycia pojedynczych plastrów. Slice apart - Rozbij + Rozetnij diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts index 98ee9214d9..a32c29f7e8 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts @@ -6593,7 +6593,7 @@ It will create a 'Compound Filter' for each shape. Wires - Wires + Trådar diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts index 7c83a770f4..0a6405943e 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign.ts @@ -3766,39 +3766,39 @@ This may lead to unexpected results. - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. - + Active Body Required - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. - + Feature is not in a body - + In order to use this feature it needs to belong to a body object in the document. - + Feature is not in a part - + In order to use this feature it needs to belong to a part object in the document. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_be.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_be.ts index 9f897bd616..82fd97cb2d 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_be.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_be.ts @@ -3793,7 +3793,7 @@ This may lead to unexpected results. Грань - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3802,32 +3802,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Калі ў вас ёсць дакумент з аб'ектамі Дызайну Дэталі без цела, ужывайце функцыю міграцыі ў Дызайн Дэталі, каб змясціць іх у Цела. - + Active Body Required Неабходна бягучае Цела - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Каб стварыць новы аб'ект Праектавання дэталі, у дакуменце павінен быць бягучы аб'ект Цела. Калі ласка, зрабіце адзін бягучым (падвоеная пстрычка), альбо стварыце новае Цела. - + Feature is not in a body Элемент не знаходзіцца ў целе - + In order to use this feature it needs to belong to a body object in the document. Каб ужыць гэты элемент, ён павінен належаць да аб'екту цела ў дакуменце. - + Feature is not in a part Элемент не знаходзіцца ў дэталі - + In order to use this feature it needs to belong to a part object in the document. Каб ужыць гэты элемент, ён павінен належаць да аб'екту дэталі ў дакуменце. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts index 45a94d5367..29754244f5 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ca.ts @@ -83,47 +83,47 @@ de manera que s'evita l'autointersecció. Number of gear teeth - Number of gear teeth + Nombre de dents de l'engranatge Modules of the gear - Modules of the gear + Mòdul de l'engranatge Pressure angle of gear teeth - Pressure angle of gear teeth + Angle de pressió de l'engranatge True=2 curves with each 3 control points False=1 curve with 4 control points. - True=2 curves with each 3 control points False=1 curve with 4 control points. + Cert=2 corbes amb 3 punts de control cadascuna Fals=1 corba amb 4 punts de control. True=external Gear False=internal Gear - True=external Gear False=internal Gear + Cert=Engranatge extern Fals=Engranatge intern The height of the tooth from the pitch circle up to its tip, normalized by the module. - The height of the tooth from the pitch circle up to its tip, normalized by the module. + L'alçada de la dent des del cercle de pas fins a la seva punta, normalitzada pel mòdul. The height of the tooth from the pitch circle down to its root, normalized by the module. - The height of the tooth from the pitch circle down to its root, normalized by the module. + L'alçada de la dent des del cercle de pas fins a la seva arrel, normalitzada pel mòdul. The radius of the fillet at the root of the tooth, normalized by the module. - The radius of the fillet at the root of the tooth, normalized by the module. + El radi del filet a l'arrel de la dent, normalitzat pel mòdul. The distance by which the reference profile is shifted outwards, normalized by the module. - The distance by which the reference profile is shifted outwards, normalized by the module. + La distància a la qual el perfil de referència es desplaça cap a fora, normalitzada pel mòdul. @@ -1063,22 +1063,22 @@ de manera que s'evita l'autointersecció. Addendum Coefficient - Addendum Coefficient + Coeficient a afegir Dedendum Coefficient - Dedendum Coefficient + Coeficient a sostreure Root Fillet Coefficient - Root Fillet Coefficient + Coeficient de filet d'origen Profile Shift Coefficient - Profile Shift Coefficient + Coeficient de desplaçament de perfil @@ -1573,7 +1573,7 @@ clica altre cop per finalitzar la selecció Empty chamfer created ! - Empty chamfer created ! + S'ha creat un xamfrà buit! @@ -1674,7 +1674,7 @@ clica altre cop per finalitzar la selecció Empty draft created ! - Empty draft created ! + S'ha creat un dibuix buit! @@ -1743,7 +1743,7 @@ clica altre cop per finalitzar la selecció Click on a face in the model - Click on a face in the model + Clica en una cara del model @@ -1879,7 +1879,7 @@ clica altre cop per finalitzar la selecció Empty fillet created ! - Empty fillet created ! + S'ha creat un filet buit! @@ -2030,12 +2030,12 @@ clica altre cop per finalitzar la selecció Warning: helix might be self intersecting - Warning: helix might be self intersecting + Atenció: l'hèlix pot ser autointerferent Error: helix touches itself - Error: helix touches itself + Error: l'hèlix es toca a si mateixa @@ -2058,7 +2058,7 @@ clica altre cop per finalitzar la selecció Counterdrill - Counterdrill + Aixamfranat @@ -2373,7 +2373,7 @@ clica altre cop per finalitzar la selecció To last - To last + Al darrer @@ -2543,7 +2543,7 @@ mesurada al llarg de la direcció especificada Select face - Select face + Selecciona una cara @@ -3113,7 +3113,7 @@ clica altre cop per finalitzar la selecció Empty thickness created ! - Empty thickness created ! + S'ha creat un gruix buit! @@ -3794,7 +3794,7 @@ Això pot portar a resultats inesperats. Cara - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3803,32 +3803,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Si teniu un document antic amb objectes PartDesign sense cos, utilitzeu la funció de migrar a PartDesign per a posar-los en un cos. - + Active Body Required Es requereix un cos actiu - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Per a crear un nou objecte PartDesign, ha d'haver un cos actiu en el document. Activeu-ne un (doble clic) o creeu-ne un de nou. - + Feature is not in a body El perfil no és en un cos - + In order to use this feature it needs to belong to a body object in the document. Per utilitzar aquesta característica cal que pertanyen a un objecte del cos del document. - + Feature is not in a part El Perfil no és en una zona - + In order to use this feature it needs to belong to a part object in the document. Per utilitzar aquesta característica cal que pertanyen a un objecte de part del document. @@ -4001,42 +4001,42 @@ Tot i que podreu migrar en qualsevol moment més tard amb 'Disseny de peces -> Edit chamfer - Edit chamfer + Edita el xamfrà Edit draft - Edit draft + Edita el dibuix Edit fillet - Edit fillet + Edita filet Edit linear pattern - Edit linear pattern + Edita el patró lineal Edit mirrored - Edit mirrored + Edita la simetria Edit multi-transform - Edit multi-transform + Edita la multi-transformació Edit polar pattern - Edit polar pattern + Edita el patró polar Edit scaled - Edit scaled + Edita l'escalat @@ -4561,8 +4561,7 @@ Només disponible per a forats sense rosca For countersinks this is the depth of the screw's top below the surface - For countersinks this is the depth of -the screw's top below the surface + Per forats aixamfranats és la profunditat entre la cara superior del cap del cargol i la superfície @@ -4740,7 +4739,7 @@ més de 90: radi de forat més gran a la part inferior Creates or edit the involute gear definition. - Creates or edit the involute gear definition. + Crea o edita la definició de l'evolvent de l'engranatge. @@ -4753,7 +4752,7 @@ més de 90: radi de forat més gran a la part inferior Creates or edit the sprocket definition. - Creates or edit the sprocket definition. + Crea o edita la definició del pinyó. @@ -4761,67 +4760,67 @@ més de 90: radi de forat més gran a la part inferior Length [mm] - Length [mm] + Longitud [mm] Diameter [mm] - Diameter [mm] + Diàmetre [mm] Inner diameter [mm] - Inner diameter [mm] + Diàmetre interior [mm] Constraint type - Constraint type + Tipus de restricció Start edge type - Start edge type + Tipus d'aresta inicial Start edge size - Start edge size + Mida d'aresta inicial End edge type - End edge type + Tipus d'aresta final End edge size - End edge size + Mida d'aresta final Shaft wizard - Shaft wizard + Assistent d'eixos Section 1 - Section 1 + Secció 1 Section 2 - Section 2 + Secció 2 Add column - Add column + Afegeix una columna Section %s - Section %s + Secció %s @@ -4834,12 +4833,12 @@ més de 90: radi de forat més gran a la part inferior Missing module - Missing module + Falta mòdul You may have to install the Plot add-on - You may have to install the Plot add-on + És possible que hagis d'instal·lar el complement Plot @@ -4847,12 +4846,12 @@ més de 90: radi de forat més gran a la part inferior Shaft design wizard... - Shaft design wizard... + Assistent pel disseny d'eixos... Start the shaft design wizard - Start the shaft design wizard + Inicia l'assistent de disseny d'eixos @@ -4860,12 +4859,12 @@ més de 90: radi de forat més gran a la part inferior Shaft design wizard... - Shaft design wizard... + Assistent pel disseny d'eixos... Start the shaft design wizard - Start the shaft design wizard + Inicia l'assistent de disseny d'eixos @@ -4873,7 +4872,7 @@ més de 90: radi de forat més gran a la part inferior Linked object is not a PartDesign feature - Linked object is not a PartDesign feature + L'objecte vinculat no és una característica de Disseny de peces diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts index e17de106e6..7fbdcdd756 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts @@ -3796,7 +3796,7 @@ To může vést k neočekávaným výsledkům. Plocha - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3805,32 +3805,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Pokud máte starší dokument s objekty PartDesignu bez Těla, použijte funkci pro migraci, která je umístí do Těla. - + Active Body Required Je potřeba aktivní Tělo - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Pro vytvoření nového PartDesign objektu musí být v dokumentu aktivní objekt Tělo. Aktivujte prosím jeden (dvojklikem) nebo vytvořte nové Tělo. - + Feature is not in a body Prvek není tělo - + In order to use this feature it needs to belong to a body object in the document. Pro použití tohoto prvku je potřebné, aby patřil k objektu těla v dokumentu. - + Feature is not in a part Prvek není díl - + In order to use this feature it needs to belong to a part object in the document. Pro použití tohoto prvku je potřebné, aby patřil k objektu díl v dokumentu. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts index f02a42a9af..799e307b13 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts @@ -3793,7 +3793,7 @@ This may lead to unexpected results. Fläche - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3802,33 +3802,33 @@ If you have a legacy document with PartDesign objects without Body, use the migr Wenn ein älteres Dokument mit PartDesign-Objekten ohne Körper vorliegt, wird die PartDesign-Funktion Migrieren verwendet, um sie in einen Körper abzulegen. - + Active Body Required Aktiver Körper erforderlich - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Um ein neues PartDesign-Objekt zu erstellen, muss ein aktiver Körper in diesem Dokument vorhanden sein. Bitte aktivieren (Doppelklick) Sie einen oder erstellen einen neuen Körper. - + Feature is not in a body Objekt ist nicht Teil eines Körpers - + In order to use this feature it needs to belong to a body object in the document. Um diese Funktion verwenden zu können, muss es Teil eines Körpers im Dokument sein. - + Feature is not in a part Objekt ist nicht Teil einer Baugruppe - + In order to use this feature it needs to belong to a part object in the document. Um diese Funktion verwenden zu können, muss es Teil einer Baugruppe im Dokument sein. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts index 564a8fdff8..6bc25478d6 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts @@ -3795,7 +3795,7 @@ This may lead to unexpected results. Όψη - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3804,32 +3804,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. - + Active Body Required Απαιτείται Ενεργό Σώμα - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Για να δημιουργήσετε ένα νέο αντικείμενο ΣχεδίασηςΕξαρτήματος, θα πρέπει να υπάρχει ένα ενεργό Σώμα στο έγγραφο. Παρακαλώ ενεργοποιήστε κάποιο (κάνοντας διπλό κλικ) ή δημιουργήστε ένα νέο Σώμα. - + Feature is not in a body Το χαρακτηριστικό δεν βρίσκεται σε κάποιο σώμα - + In order to use this feature it needs to belong to a body object in the document. Προκειμένου να χρησιμοποιήσετε αυτό το χαρακτηριστικό θα πρέπει να ανήκει σε κάποιο σώμα που βρίσκεται στο έγγραφο. - + Feature is not in a part Το χαρακτηριστικό δεν βρίσκεται σε κάποιο εξάρτημα - + In order to use this feature it needs to belong to a part object in the document. Προκειμένου να χρησιμοποιήσετε αυτό το χαρακτηριστικό θα πρέπει να ανήκει σε κάποιο εξάρτημα που βρίσκεται στο έγγραφο. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-AR.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-AR.ts index 0478bb4c7d..49056819bd 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-AR.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-AR.ts @@ -3795,7 +3795,7 @@ Esto puede conducir a resultados inesperados. Cara - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3804,32 +3804,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Si tienes un documento heredado con objetos DiseñoDePieza sin un Cuerpo, utiliza la función de migración en DiseñoDePieza para ponerlos en un Cuerpo. - + Active Body Required Cuerpo Activo Requerido - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Para crear un nuevo objeto de DiseñoDePieza, debe haber un objeto activo del cuerpo en el documento. Por favor active (doble clic) o cree un nuevo cuerpo. - + Feature is not in a body Operación no está en un cuerpo - + In order to use this feature it needs to belong to a body object in the document. Para poder utilizar esta operación debe pertenecer a un objeto del cuerpo en el documento. - + Feature is not in a part La operación no está en una pieza - + In order to use this feature it needs to belong to a part object in the document. Para poder utilizar esta operación necesita pertenecer a un objeto de pieza en el documento. @@ -3963,7 +3963,7 @@ This feature is broken and can't be edited. The document "%1" you are editing was designed with an old version of PartDesign workbench. - El documento "%1" que está editando fue diseñado con una versión antigua del entorno de trabajo DiseñoDePieza. + El documento "%1" que está editando fue diseñado con una versión antigua del banco de trabajo DiseñoDePieza. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts index e2d7f6c5d7..1a134cc363 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts @@ -3791,7 +3791,7 @@ This may lead to unexpected results. Cara - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3800,32 +3800,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Si tienes un documento heredado con objetos PartDesign sin un Cuerpo, utiliza la función de migración en PartDesign para ponerlos en un Cuerpo. - + Active Body Required Se requiere Cuerpo Activo - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Para crear un nuevo objeto de PartDesign, debe haber un objeto activo del cuerpo en el documento. Por favor active (doble click) o cree un nuevo cuerpo. - + Feature is not in a body Función no está en un cuerpo - + In order to use this feature it needs to belong to a body object in the document. Para poder utilizar esta operación debe pertenecer a un objeto del cuerpo en el documento. - + Feature is not in a part Función no está en una pieza - + In order to use this feature it needs to belong to a part object in the document. Para poder usar esta operación debe pertenecer a una pieza objeto en el documento. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts index 1fcf59f4d6..1e33a93110 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_eu.ts @@ -3793,7 +3793,7 @@ Espero ez diren emaitzak gerta daitezke. Aurpegia - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3802,32 +3802,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Bertsio zaharragoan dagoen dokumentu bat baduzu eta gorputzik gabeko PartDesign objektuak baditu, erabili PartDesign-en migrazio-funtzioa haiek gorputz batean sartzeko. - + Active Body Required Gorputz aktiboa behar da - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. PartDesign objektu berria sortzeko, gorputz-objektu aktibo bat egon behar du dokumentuan. Aktibatu gorputz bat (klik bikoitza) edo sortu gorputz berria. - + Feature is not in a body Elementua ez dago gorputz batean - + In order to use this feature it needs to belong to a body object in the document. Ezaugarri hau erabili ahal izateko, dokumentuko groputz-objektu batekoa izan behar du. - + Feature is not in a part Elementua ez dago pieza batean - + In order to use this feature it needs to belong to a part object in the document. Ezaugarri hau erabili ahal izateko, dokumentuko pieza-objektu batekoa izan behar du. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts index c9c7dcffa5..a28fac30a4 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fi.ts @@ -3796,7 +3796,7 @@ Tämä voi johtaa odottamattomiin tuloksiin. Tahko - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3805,32 +3805,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Jos asiakirja on vanhentunutta tyyppiä OsanSuunnittelu-objekteilla ilman kappaleita, valitse muunnostoiminto OsanSuunnittelussa ja sijoita objektit kappaleeseen. - + Active Body Required Tarvitaan aktiivinen kappale - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Jotta uudeen OsanSuunnittelu-objektin voisi luoda, asiakirjassa pitäisi olla aktiivinen kappale. Tee kappaleesta aktiivinen (tuplaklikkaus) tai luo uusi. - + Feature is not in a body Piirre ei ole kappaleessa - + In order to use this feature it needs to belong to a body object in the document. Jotta tätä piirrettä voitaisiin käyttää, sen pitäisi kuulua asiakirjaan sisältyvään kappale-objektiin. - + Feature is not in a part Piirre ei kuulu osaan - + In order to use this feature it needs to belong to a part object in the document. Jotta tätä piirrettä voitaisiin käyttää, sen pitäisi kuulua asiakirjaan sisältyvään osa-objektiin. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts index 512e4f771d..ffeb4e1e99 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts @@ -2926,7 +2926,7 @@ mesurée dans la direction spécifiée Angle: - Angle : + Angle : @@ -3061,7 +3061,7 @@ click again to end selection Thickness - Evidement + Coque @@ -3784,7 +3784,7 @@ This may lead to unexpected results. Face - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3793,32 +3793,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Si vous avez un vieux document avec des objets PartDesign sans corps, utilisez la fonction de migration sous PartDesign pour les inclure dans un corps. - + Active Body Required Corps actif requis - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Pour créer un nouvel objet de PartDesign, il doit y avoir un corps actif dans le document. Veuillez en activer un (par double clic) ou créer un nouveau corps. - + Feature is not in a body La fonction ne fait pas partie d'un corps - + In order to use this feature it needs to belong to a body object in the document. Pour utiliser cette fonction, elle doit appartenir à un corps dans le document. - + Feature is not in a part La fonction ne fait pas partie d'une pièce - + In order to use this feature it needs to belong to a part object in the document. Afin d'utiliser cette fonction, elle doit appartenir à un objet pièce dans le document. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.ts index 5729b6f34b..7651cdd573 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_gl.ts @@ -3796,7 +3796,7 @@ Esto pode levar a resultados inexperados. Face - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3805,32 +3805,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Se tes un antigo documento con obxectos PartDesign sen Corpo, usa a función migrar en PartDesign poñéndoa dentro do Corpo. - + Active Body Required Require Corpo Activo - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Para crear un novo obxecto PartDesign, debe haber un obxecto Corpo activo no documento. Por favor, faga un activo (doble clic) ou cre un novo Corpo. - + Feature is not in a body O recurso non está nun corpo - + In order to use this feature it needs to belong to a body object in the document. Para usar este recurso é preciso que pertenza a un obxecto corpo no documento. - + Feature is not in a part O recurso non está nunha peza - + In order to use this feature it needs to belong to a part object in the document. Para usar este recurso é preciso que pertenza a un obxecto peza no documento. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts index 7f2b174f45..d1d2087cb1 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hr.ts @@ -3800,7 +3800,7 @@ To može dovesti do neočekivanih rezultata. Površina - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3809,32 +3809,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Ako imate naslijeđeni dokument sa PartDesign objektom bez tijela koristite funkciju transfera u modulu PartDesign da bi ste ga stavili u tijelo. - + Active Body Required Zahtijeva aktivno tijelo - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Za stvaranje novog PartDesign objekta, morate imati aktivno tijelo objekta u dokumentu. Aktivirati jedno tijelo (dupli klik) ili stvorite novo tijelo. - + Feature is not in a body Element nije u tijelu - + In order to use this feature it needs to belong to a body object in the document. Da biste mogli koristiti ovu značajku ona mora pripadati objektu tijela u dokumentu. - + Feature is not in a part Element nije u dijelu - + In order to use this feature it needs to belong to a part object in the document. Da biste mogli koristiti ovu značajku ona mora pripadati objektu dio u dokumentu. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts index 28bc578f1b..e2e4eef3cb 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts @@ -3789,7 +3789,7 @@ Ez nem várt eredményekhez vezethet. Felület - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3798,32 +3798,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Ha van egy örökölt dokumentum AlkatrészTervezés objektummal Test nélkül, használja az áttelepítés funkciót az AlkatrészTervezésben ahhoz, hogy a Testbe helyezze azokat. - + Active Body Required Aktív test szükséges - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Egy új AlkatrészTervezés objektum létrehozásához ott kell lennie egy aktív Test objektumnak a dokumentumban. Kérjük aktiváljon egyet (dupla kattintással), vagy hozzon létre egy új Testet. - + Feature is not in a body Tulajdonság nem a testen van - + In order to use this feature it needs to belong to a body object in the document. Funkció használatához szükséges, hogy az egy test objektumhoz tartozzon a dokumentumban. - + Feature is not in a part Tulajdonság nem egy részben van - + In order to use this feature it needs to belong to a part object in the document. Funkció használatához szükséges, hogy az egy alkatrész objektumhoz tartozzon a dokumentumban. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts index 993c6be883..b4eaf046c3 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts @@ -2406,7 +2406,7 @@ fare nuovamente clic per terminare la selezione Dimension - Quota + Dimensione @@ -3790,39 +3790,39 @@ This may lead to unexpected results. Faccia - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. Per poter utilizzare PartDesign è necessario che nel documento ci sia un oggetto Corpo attivo. Si prega di renderne uno attivo (doppio clic) o di crearne uno. Se si dispone di un vecchio documento con oggetti PartDesign senza corpo, utilizzare la funzione di migrazione in PartDesign per inserirli in un corpo. - + Active Body Required È richiesto un corpo attivo - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Per creare un nuovo oggetto di PartDesign, nel documento deve essere attivo un oggetto corpo. Si prega di attivarne uno (doppio clic) o di crearne uno nuovo. - + Feature is not in a body La funzione non è in un corpo - + In order to use this feature it needs to belong to a body object in the document. Per poter utilizzare questa funzione essa deve appartenere a un oggetto corpo nel documento. - + Feature is not in a part La funzione non è in una parte - + In order to use this feature it needs to belong to a part object in the document. Per poter utilizzare questa funzione essa deve appartenere a un oggetto parte del documento. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts index dbe53f208c..cf66c82313 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ja.ts @@ -3790,7 +3790,7 @@ This may lead to unexpected results. 面 - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3799,32 +3799,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr ボディーの無い PartDesign オブジェクトを含む古い形式のドキュメントの場合は PartDesign の移行機能を使用してそれらをボディーに配置してください。 - + Active Body Required アクティブなボディーが必要です。 - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. 新しいPartDesignオブジェクトを作成するためにはドキュメント内にアクティブなボディーがなければなりません。どれかをアクティブにするか（ダブルクリック）、新しいボディーを作成してください。 - + Feature is not in a body フィーチャーがボディー内にありません。 - + In order to use this feature it needs to belong to a body object in the document. このフィーチャーを使用するためにはそれがドキュメント内のボディーオブジェクトに属している必要があります。 - + Feature is not in a part フィーチャーがパーツ内にありません。 - + In order to use this feature it needs to belong to a part object in the document. このフィーチャーを使用するためにはそれがドキュメント内のパーツオブジェクトに属している必要があります。 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts index 312cb2cb1b..ebe48ca494 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ka.ts @@ -3795,7 +3795,7 @@ This may lead to unexpected results. სიბრტყე - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3804,32 +3804,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr თუ თქვენ გაქვთ მოძველებული დოკუმენტი PartDesign ობიექტებით სხეულის გარეშე, გამოიყენეთ მიგრაციის ფუნქცია PartDesign-ში მათი სხეულში ჩასადებად. - + Active Body Required საჭიროა აქტიური სხეული - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. ახალი ნაწილის დიზაინის ობიექტის შესაქმნელად, დოკუმენტში უნდა იყოს აქტიური სხეულის ობიექტი. გთხოვთ, გახადოთ ერთი აქტიური (ორმაგი დაწკაპუნებით) ან შექმენით ახალი სხეული. - + Feature is not in a body თვისება სხეულში არაა - + In order to use this feature it needs to belong to a body object in the document. ამ თვისების გამოსაყენებლად ის დოკუმენტში სხეულის ობიექტს უნდა ეკუთვნოდეს. - + Feature is not in a part თვისება არ წარმოადგენს ნაწილს - + In order to use this feature it needs to belong to a part object in the document. ამ თვისების გამოსაყენებლად ის დოკუმენტში ნაწლის ობიექტს უნდა ეკუთვნოდეს. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.ts index 8d74d27ecc..9f84054bbb 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ko.ts @@ -3796,7 +3796,7 @@ This may lead to unexpected results. 면 선택 - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3805,32 +3805,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Body가 없는 PartDesign 개체가 있는 레거시 문서가 있는 경우 PartDesign의 마이그레이션 기능을 사용하여 Body에 넣습니다. - + Active Body Required 작업 바디(Body)가 필요합니다. - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. 새로운 부품설계(PartDesign) 객체를 생성하기 위해서, 문서에 활성화된 바디(Body)가 있어야 합니다. 하나의 바디(Body)를 더블 클릭하여 활성화하거나 새로운 바디(Body)를 생성하세요. - + Feature is not in a body 바디(Body)에 피처가 없습니다. - + In order to use this feature it needs to belong to a body object in the document. 이 피처를 사용하기 위해서는, 피처가 현재 문서에 있는 바디(Body) 객체에 속해야 합니다. - + Feature is not in a part 피처가 파트에 없습니다. - + In order to use this feature it needs to belong to a part object in the document. 이 피처를 사용하기 위해서는, 피처가 현재 문서에 있는 파트 객체에 속해야 합니다. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts index 19784888d8..096cbc5a29 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_nl.ts @@ -3794,7 +3794,7 @@ Dit kan tot onverwachte resultaten leiden. Vlak - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3803,32 +3803,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Als u een ouder document met PartDesign objecten zonder een lichaam hebt, gebruik dan de overdrachtsfunctie in PartDesign om hen in een lichaam te zetten. - + Active Body Required Actief lichaam benodigd - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Om een nieuw PartDesign object te maken moet er een actief lichaam object aanwezig zijn in het document. Maak een lichaam actief (dubbel klik) of maak een nieuw lichaam. - + Feature is not in a body Functie is niet in een lichaam - + In order to use this feature it needs to belong to a body object in the document. Om deze functie te gebruiken moet deze tot een onderdeel object behoren in het document. - + Feature is not in a part Functie is niet in een onderdeel - + In order to use this feature it needs to belong to a part object in the document. Om deze functie te gebruiken moet deze tot een onderdeel object behoren in het document. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts index 638756a2dd..fbbaaf1dd3 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts @@ -71,7 +71,7 @@ tzn. przeciwny do ruchu wskazówek zegara, poruszając się wzdłuż osi. If set, the result will be the intersection of the profile and the preexisting body. - Jeśli wybrane, wynikiem będzie część wspólna profilu i istniejącej już zawartości. + Jeśli opcja jest wybrana, wynikiem będzie część wspólna profilu i istniejącej już zawartości. @@ -655,7 +655,7 @@ wartość Fałsz = uzębienie wewnętrzne PartDesign - Part Design + Projekt części @@ -673,7 +673,7 @@ wartość Fałsz = uzębienie wewnętrzne PartDesign - Projekt części + Part Design @@ -1641,7 +1641,7 @@ kliknij ponownie, aby zakończyć wybór Select - Dodaj + Wybierz @@ -1856,7 +1856,7 @@ kliknij ponownie, aby zakończyć wybór Select - Wybierz + Dodaj @@ -3054,7 +3054,7 @@ kliknij ponownie, aby zakończyć wybór Select - Dodaj + Wybierz @@ -3796,7 +3796,7 @@ Może to prowadzić do nieoczekiwanych rezultatów. Powierzchnia - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3805,32 +3805,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Jeśli masz starszy dokument z obiektami środowiska pracy Projekt Części bez obiektu Zawartości, użyj funkcji migracji w środowisku pracy Projekt Części, aby umieścić je w obiekcie Zawartość. - + Active Body Required Wymagana jest aktywna zawartość - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Aby utworzyć nowy obiekt Projektu Części, w dokumencie musi być aktywny obiekt Zawartość. Uaktywnij jeden (podwójnym kliknięciem) lub utwórz nową Zawartość. - + Feature is not in a body Funkcja nie jest w korpusie - + In order to use this feature it needs to belong to a body object in the document. Ta cecha musi przynależeć do zawartości w danym dokumencie, by można ją było wykorzystać. - + Feature is not in a part Funkcja nie jest w części - + In order to use this feature it needs to belong to a part object in the document. Ta cecha musi przynależeć do obiektu części w danym dokumencie, by można ją było wykorzystać. @@ -4708,7 +4708,7 @@ powyżej 90°: większy promień otworu u dołu Measure - Wymiarowanie + Pomiary @@ -4718,7 +4718,7 @@ powyżej 90°: większy promień otworu u dołu Toggle 3D - Przełącz widok 3D + Włącz / wyłącz widok pomiarów 3D diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts index ddb0b7e093..78e1241579 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts @@ -83,17 +83,17 @@ so that self intersection is avoided. Number of gear teeth - Number of gear teeth + Número de dentes da engrenagem Modules of the gear - Modules of the gear + Módulos da engrenagem Pressure angle of gear teeth - Pressure angle of gear teeth + Ângulo de pressão dos dentes da engrenagem @@ -1501,7 +1501,7 @@ Se for zero, é igual ao Raio2 Form - Forma + Formulário @@ -1736,7 +1736,7 @@ clique novamente para terminar a seleção Custom direction - Custom direction + Direção personalizada @@ -2446,12 +2446,12 @@ from the model as reference Custom direction - Custom direction + Direção personalizada Show direction - Show direction + Mostrar direção @@ -2541,7 +2541,7 @@ medido ao longo da direção especificada Select face - Select face + Selecionar face @@ -3790,7 +3790,7 @@ This may lead to unexpected results. Face - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3799,32 +3799,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Se você tiver um documento antigo com objetos do PartDesign sem corpo, use a função de migração do PartDesign para colocá-los em um corpo. - + Active Body Required Corpo ativo necessário - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Para criar um novo objeto de PartDesign, deve haver um corpo ativo no documento. Por favor, ative (duplo clique) ou crie um novo corpo. - + Feature is not in a body O objeto não está num corpo - + In order to use this feature it needs to belong to a body object in the document. Para utilizar este objeto ele precisa pertencer a um corpo do documento. - + Feature is not in a part O objeto não está numa peça - + In order to use this feature it needs to belong to a part object in the document. Para utilizar este objeto ele precisa pertencer a uma peça do documento. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.ts index c6f4db04d4..37ccf57306 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-PT.ts @@ -3792,39 +3792,39 @@ This may lead to unexpected results. Face - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. Para usar PartDesign, é necessário um objeto corpo ativo no documento. Por favor, ative (duplo clique) ou crie um. Se tiver um documento antigo com objetos de PartDesign sem corpo, use a função migrar em PartDesign para colocá-los num corpo. - + Active Body Required Corpo ativo necessário - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Para criar um novo objeto de PartDesign, deve haver um objeto corpo ativo no documento. Por favor, ative (duplo clique) ou crie um novo corpo. - + Feature is not in a body O objeto não está num corpo - + In order to use this feature it needs to belong to a body object in the document. Para utilizar este objeto ele precisa de pertencer a um do corpo do documento. - + Feature is not in a part O objeto não está numa peça - + In order to use this feature it needs to belong to a part object in the document. Para utilizar este objeto ele precisa de pertencer a uma peça do documento. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts index 73b430d110..f4a0afc370 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts @@ -3793,39 +3793,39 @@ This may lead to unexpected results. Faţă - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. Pentru a utiliza PartDesign aveți nevoie de un obiect Body activ în document. Vă rugăm să activați unul (dublu clic) sau să creați unul. - + Active Body Required Corp activ necesar - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Pentru a crea un nou obiect PartDesign, trebuie să existe un corp activ în document. Activați unul (faceți dublu clic) sau creați un nou corp. - + Feature is not in a body Funcția nu face parte dintr-un corp - + In order to use this feature it needs to belong to a body object in the document. Pentru a utiliza această caracteristică, ea trebuie să aparțină unui corp din document. - + Feature is not in a part Caracteristica nu este de la o piesă/Part - + In order to use this feature it needs to belong to a part object in the document. Pentru a utiliza această funcție, ea trebuie să aparțină unei piese din document. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts index 0a81f0fe39..4f0dd5ca8d 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts @@ -3794,7 +3794,7 @@ This may lead to unexpected results. Грань - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3803,32 +3803,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Если у Вас устаревший документ, содержащий объекты PartDesign без Тела, тогда используйте функцию Миграция в меню "PartDesign", чтобы вложить объекты в Тело. - + Active Body Required Требуется активное тело - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Что бы создать новый объект в верстаке "Проектирование детали", в документе должно быть активное Тело. Сделайте тело активным (двойным щелчком) или создайте новое Тело. - + Feature is not in a body Элемент вне тела - + In order to use this feature it needs to belong to a body object in the document. Чтобы использовать этот элемент, он должен принадлежать объекту тело в документе. - + Feature is not in a part Элемент вне детали - + In order to use this feature it needs to belong to a part object in the document. Для того, чтобы использовать этот элемент, он должен являться объектом типа деталь в документе. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts index 11f28eac51..f19c83bfb5 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts @@ -3796,7 +3796,7 @@ To lahko pripelje do nepričakovanih rezultatov. Ploskev - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3805,32 +3805,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Če je vaš dokument podedovan in ima PartDesign predmete brez Teles, uporabitete PartDesighnovo zmožnost pretvorbe, da jih spremenite v Telo. - + Active Body Required Potrebno dejavno Telo - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Če želite ustvariti nov PartDesign predmet, mora biti v dokumentu dejavno telo. Naredite enega dejavnega (dvoklik) ali ustvarite novega. - + Feature is not in a body Značilnost ni v telesu - + In order to use this feature it needs to belong to a body object in the document. Če želite uporabiti to značilnost, mora pripradati telesu v dokumentu. - + Feature is not in a part Značilnost ni v delu - + In order to use this feature it needs to belong to a part object in the document. Če želite uporabiti to značilnost, mora pripadati delu v dokumentu. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.ts index 1d6340c56f..b88f2270ba 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr-CS.ts @@ -3796,7 +3796,7 @@ Ovo može dovesti do neočekivanih rezultata. Stranica - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3805,32 +3805,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Ako imaš nasleđeni dokument sa PartDesign objektima bez tela, koristi funkciju migracije u PartDesign-u da bi ih stavio u telo. - + Active Body Required Potrebno je aktivno telo - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Da bi napravio novi Part Design objekat, u dokumentu mora postojati aktivno telo. Aktiviraj jedno (dvostruki klik) ili ga napravi. - + Feature is not in a body Tipski oblik nije unutar tela - + In order to use this feature it needs to belong to a body object in the document. Da bi koristio ovaj tipski oblik, on mora da pripada telu u dokumentu. - + Feature is not in a part Tipski oblik nije unutar dela - + In order to use this feature it needs to belong to a part object in the document. Da bi koristio ovaj tipski oblik, on mora da pripada delu u dokumentu. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts index 20f3445b12..c856ab9fa8 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sr.ts @@ -3796,7 +3796,7 @@ This may lead to unexpected results. Страница - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3805,32 +3805,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Ако имаш наслеђени документ са PartDesign објектима без тела, користи функцију миграције у PartDesign-у да би их ставио у тело. - + Active Body Required Потребно је активно тело - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Да би направио нови Part Design објекат, у документу мора постојати активно тело. Активирај једно (двоструки клик) или га направи. - + Feature is not in a body Типски облик није унутар тела - + In order to use this feature it needs to belong to a body object in the document. Да би користио овај типски облик, он мора да припада телу у документу. - + Feature is not in a part Типски облик није унутар дела - + In order to use this feature it needs to belong to a part object in the document. Да би користио овај типски облик, он мора да припада делу у документу. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts index cfe34ada6f..ce3e1feb49 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts @@ -3791,7 +3791,7 @@ This may lead to unexpected results. Yta - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3800,32 +3800,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Om du har ett utdaterat dokument med Part Design-objekt utan kropp, använd migrationsfunktionen i Part Design för att lägga till dem i en kropp. - + Active Body Required En aktiv kropp krävs - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. För att skapa ett nyttPart Design-objekt, måste det finnas en aktiv kropp i dokumentet. Vänligen gör en kropp aktiv (dubbelklick) eller skapa en ny kropp. - + Feature is not in a body Funktionen är inte i en kropp - + In order to use this feature it needs to belong to a body object in the document. För att kunna använda denna funktion måste den tillhöra en kropp i dokumentet. - + Feature is not in a part Funktionen är inte i en del - + In order to use this feature it needs to belong to a part object in the document. För att kunna använda denna funktion måste den tillhöra en del i dokumentet. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts index 97e926ffaa..b7824a62b7 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_tr.ts @@ -6,17 +6,17 @@ The center point of the helix' start; derived from the reference axis. - The center point of the helix' start; derived from the reference axis. + Helis başlangıcı merkez noktası; referans eksenden türetildi. The helix' direction; derived from the reference axis. - The helix' direction; derived from the reference axis. + Helis yönü; referans eksenden türetildi. The reference axis of the helix. - The reference axis of the helix. + Helis referans ekseni. @@ -1573,7 +1573,7 @@ seçimi bitirmek için tekrar basın Empty chamfer created ! - Empty chamfer created ! + Ek bir düz pah yaratıldı! @@ -1674,7 +1674,7 @@ seçimi bitirmek için tekrar basın Empty draft created ! - Empty draft created ! + Boş bir taslak yaratıldı! @@ -1879,7 +1879,7 @@ seçimi bitirmek için tekrar basın Empty fillet created ! - Empty fillet created ! + Ek bir yuvarlama yaratıldı ! @@ -2035,7 +2035,7 @@ seçimi bitirmek için tekrar basın Error: helix touches itself - Error: helix touches itself + Hata: Helis kendisi ile kesişiyor @@ -3113,7 +3113,7 @@ seçimi bitirmek için tekrar basın Empty thickness created ! - Empty thickness created ! + Boş bir kalınlık yaratıldı! @@ -3229,7 +3229,7 @@ seçimi bitirmek için tekrar basın Draft parameters - Draft parameters + Taslak parametreleri @@ -3796,7 +3796,7 @@ Bu, beklenmedik sonuçlara neden olabilir. Yüz - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3805,32 +3805,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Gövdeye sahip olmayan nesneler içeren eski bir belgeniz varsa, bunları bir gövde içine almak için ParçaTasarımı'ndaki geçiş (migrate) işlevini kullanın. - + Active Body Required Aktif Vücut Gerekli - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Yeni bir PartDesign nesnesi oluşturmak için belgede etkin bir Body nesnesi olmalıdır. Lütfen birini aktif hale getirin (çift tıklama) veya yeni bir Beden oluşturun. - + Feature is not in a body Özellik bir vücutta değil - + In order to use this feature it needs to belong to a body object in the document. Bu özelliği kullanmak için belgede bir gövde nesnesine ait olması gerekir. - + Feature is not in a part Özellik bir parçası değil - + In order to use this feature it needs to belong to a part object in the document. Bu özelliği kullanmak için belgedeki bir parçaya ait olması gerekir. @@ -4004,27 +4004,27 @@ Buna karşın, daha sonra istediğiniz an 'ParçaTasarımı->Geçiş...' 'Par Edit chamfer - Edit chamfer + Pahı düzenle Edit draft - Edit draft + Taslağı düzenle Edit fillet - Edit fillet + Yuvarlamayı düzenle Edit linear pattern - Edit linear pattern + Doğrusal çoğaltmayı düzenle Edit mirrored - Edit mirrored + Aynalamayı düzenle @@ -4034,12 +4034,12 @@ Buna karşın, daha sonra istediğiniz an 'ParçaTasarımı->Geçiş...' 'Par Edit polar pattern - Edit polar pattern + Dairesel çoğaltmayı düzenle Edit scaled - Edit scaled + Oranlamayı düzenle @@ -4801,17 +4801,17 @@ over 90: larger hole radius at the bottom Shaft wizard - Shaft wizard + Şaft sihirbazı Section 1 - Section 1 + Seçim 1 Section 2 - Section 2 + Seçim 2 @@ -4979,60 +4979,60 @@ over 90: larger hole radius at the bottom Failed to create chamfer - Failed to create chamfer + Pah oluşturma hatası Resulting shape is null - Resulting shape is null + Sonuç şekil tanımsız Resulting shape is invalid - Resulting shape is invalid + Sonuç şekil geçersiz Size must be greater than zero - Size must be greater than zero + Ölçü sıfırdan büyük olmalı Size2 must be greater than zero - Size2 must be greater than zero + Ölçü 2 sıfırdan büyük olmalı Angle must be greater than 0 and less than 180 - Angle must be greater than 0 and less than 180 + Açı sıfır dereceden büyük ve 180 dereceden küçük olmalı Failed to create draft - Failed to create draft + Taslak oluşturma hatası Fillet radius must be greater than zero - Fillet radius must be greater than zero + Yuvarlama yarıçapı sıfırdan büyük olmalı Failed to create fillet - Failed to create fillet + Yuvarlama oluşturma hatası Angle of groove too large - Angle of groove too large + Oluk açısı çok geniş Angle of groove too small - Angle of groove too small + Oluk açısı çok dar @@ -5050,13 +5050,13 @@ over 90: larger hole radius at the bottom Creating a face from sketch failed - Creating a face from sketch failed + Taslakdan yüzey yaratma hatası Revolve axis intersects the sketch - Revolve axis intersects the sketch + Çevirme ekseni taslak ile kesizşiyor @@ -5086,19 +5086,19 @@ Intersecting sketch entities in a sketch are not allowed. Error: height too small! - Error: height too small! + Hata: yükseklik çok düşük! Error: pitch too small! - Error: pitch too small! + Hata: adım çok küçük! Error: turns too small! - Error: turns too small! + Hata: tur sayısı çok az! @@ -5113,12 +5113,12 @@ Intersecting sketch entities in a sketch are not allowed. Error: No valid sketch or face - Error: No valid sketch or face + Hata: geçerli bir taslak veya yüzey yok Error: Face must be planar - Error: Face must be planar + Hata: yüzey düzlemsel olmalı diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts index 6df3281ea1..1881019002 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts @@ -3795,7 +3795,7 @@ This may lead to unexpected results. Грань - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3804,32 +3804,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Якщо у вас є застарілий документ з обʼєктами ДизайнуДеталі без Тіла, використайте функцію міграції ДизайнуДеталі для введення їх в Тіло. - + Active Body Required Необхідне Активне Тіло - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Щоб створити новий об’єкт ДизайнуДеталі, у документі має бути активний об’єкт Тіло. Активуйте (подвійник клац) або створіть нове Тіло. - + Feature is not in a body Елемент за межами тіла - + In order to use this feature it needs to belong to a body object in the document. Щоб використовувати цей елемент, він повинен належати обʼєкту Тіло в документі. - + Feature is not in a part Елемент за межами деталі - + In order to use this feature it needs to belong to a part object in the document. Щоб використовувати цю функцію, вона повина належати обʼєкту Деталь в документі. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.ts index ba7f28f96a..8c6a5e7777 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_val-ES.ts @@ -3794,7 +3794,7 @@ Això pot portar a resultats inesperats. Cara - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3803,32 +3803,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr Si teniu un document antic amb objectes PartDesign sense cos, utilitzeu la funció de migrar a PartDesign per a posar-los en un cos. - + Active Body Required Es requereix un cos actiu - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. Per a crear un nou objecte PartDesign, ha d'haver un cos actiu en el document. Activeu-ne un (doble clic) o creeu-ne un de nou. - + Feature is not in a body La funció no forma part d'un cos. - + In order to use this feature it needs to belong to a body object in the document. Per a utilitzar aquesta característica ha de pertànyer a un objecte cos del document. - + Feature is not in a part La funció no forma part d'una peça. - + In order to use this feature it needs to belong to a part object in the document. Per a utilitzar aquesta característica ha de pertànyer a un objecte peça del document. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts index 48f2b0bf17..98adcb3106 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-CN.ts @@ -3795,7 +3795,7 @@ This may lead to unexpected results. 面 - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. @@ -3804,32 +3804,32 @@ If you have a legacy document with PartDesign objects without Body, use the migr 如果您的旧版文档中存在没有实体的零件设计工作台对象, 请使用零件设计工作台中的迁移功能将它们放入一个实体中。 - + Active Body Required 需要激活状态的实体 - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. 要创建新的 PartDesign 对象, 文档中必须有一个激活状态的实体。请 (双击) 激活或创建一个新的实体。 - + Feature is not in a body 特征不在实体内 - + In order to use this feature it needs to belong to a body object in the document. 要使用此特征, 它需隶属于文档中的实体对象。 - + Feature is not in a part 特征不在零件内 - + In order to use this feature it needs to belong to a part object in the document. 要使用此特征, 它需隶属于文档中的零件对象。 diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts index 43984fa142..5939a60178 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_zh-TW.ts @@ -3792,41 +3792,41 @@ This may lead to unexpected results. 面 - + In order to use PartDesign you need an active Body object in the document. Please make one active (double click) or create one. If you have a legacy document with PartDesign objects without Body, use the migrate function in PartDesign to put them into a Body. - 要使用零件設計物體，文件中必須有一個啟用的實體物體. 請雙擊啟用一個實體，或建立一個新的實體. -如果您使用舊版文件其零件設計物體沒有實體的話，使用零件設計中之遷移功能將他們搬到一個實體中. + 要使用 PartDesign 物件，文件中必須有一個激活的實體物件。請雙擊激活一個實體，或建立一個新的實體。 +如果您使用舊版文件其 PartDesign 物件沒有實體的話，使用 PartDesign 中之遷移功能將他們搬到一個實體中。 - + Active Body Required 需要啟用的實體 - + To create a new PartDesign object, there must be an active Body object in the document. Please make one active (double click) or create a new Body. 要建立新的零件設計物體，文件中必須有一個啟用的實體物體. 請雙擊啟用一個實體，或建立一個新的實體. - + Feature is not in a body 特徵不在實體中 - + In order to use this feature it needs to belong to a body object in the document. - 為了使用此特徵，它需要屬於文件中的實體物體. + 為了使用此特徵，它需要屬於文件中的實體物件。 - + Feature is not in a part 特徵不在零件中 - + In order to use this feature it needs to belong to a part object in the document. 為了使用此特徵，它需要屬於文件中的一個零件物體. diff --git a/src/Mod/Path/Gui/Resources/translations/Path.ts b/src/Mod/Path/Gui/Resources/translations/Path.ts index cbf8bc99c7..1f4aff5041 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path.ts @@ -4375,7 +4375,7 @@ For example: - + Choose a Path Job @@ -5155,7 +5155,7 @@ For example: - + The G-code to be inserted @@ -6887,17 +6887,17 @@ For example: - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8075,12 +8075,12 @@ Aborting op creation Path_Post - + Post Process - + Post Process the selected Job @@ -8273,4 +8273,27 @@ Aborting op creation + + PathCustom + + + Text + + + + + File + + + + + Custom file %s could not be found. + + + + + Invalid Gcode line: %s + + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_be.ts b/src/Mod/Path/Gui/Resources/translations/Path_be.ts index 76ac10c2ac..f0677595ec 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_be.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_be.ts @@ -4542,7 +4542,7 @@ For example: Профіль усёй мадэлі, абраных граняў ці абраны' рэбраў - + Choose a Path Job Абраць шлях да задання @@ -5322,7 +5322,7 @@ For example: Спіс выключаных характарыстык - + The G-code to be inserted G-код, які будзе ўстаўлены @@ -7064,17 +7064,17 @@ For example: Кант - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. Абраныя рэбры недаступныя. Калі іх некалькі, можа спрацаваць змена парадку выбару. - + Unable to create path for face(s). Не атрымалася стварыць траекторыю для граняў. - + Check edge selection and Final Depth requirements for profiling open edge(s). Праверыць выбар рабра і патрабаванні да канчатковай глыбіні для апрацоўкі разамкнутых рэбраў. @@ -8254,12 +8254,12 @@ Aborting op creation Path_Post - + Post Process Пасляапрацоўка - + Post Process the selected Job Пасляапрацоўка абранага задання @@ -8454,4 +8454,27 @@ Aborting op creation %s не мае ўласцівасці %s (%s) + + PathCustom + + + Text + Тэкст + + + + File + Файл + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ca.ts b/src/Mod/Path/Gui/Resources/translations/Path_ca.ts index ec46561fbe..97294bcf68 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ca.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ca.ts @@ -4508,7 +4508,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -5288,7 +5288,7 @@ For example: List of disabled features - + The G-code to be inserted The G-code to be inserted @@ -7025,17 +7025,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8215,12 +8215,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8415,4 +8415,27 @@ Aborting op creation %s has no property %s (%s) + + PathCustom + + + Text + Text + + + + File + Fitxer + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_cs.ts b/src/Mod/Path/Gui/Resources/translations/Path_cs.ts index 4912fa4072..2e84662f27 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_cs.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_cs.ts @@ -4501,7 +4501,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Vyberte si úlohu cesty @@ -5281,7 +5281,7 @@ For example: List of disabled features - + The G-code to be inserted The G-code to be inserted @@ -7018,17 +7018,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Zkontrolujte výběr hran a požadavky na konečnou hloubku pro profilování otevřených hran. @@ -8208,12 +8208,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8408,4 +8408,27 @@ Aborting op creation %s nemá žádnou vlastnost %s (%s) + + PathCustom + + + Text + Text + + + + File + Soubor + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_de.ts b/src/Mod/Path/Gui/Resources/translations/Path_de.ts index ed671e71e3..d5c3abdd90 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_de.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_de.ts @@ -4507,7 +4507,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Einen Path-Auftrag auswählen @@ -5287,7 +5287,7 @@ For example: List of disabled features - + The G-code to be inserted The G-code to be inserted @@ -7024,17 +7024,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8214,12 +8214,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8414,4 +8414,27 @@ Aborting op creation %s hat keine Eigenschaft %s (%s) + + PathCustom + + + Text + Text + + + + File + Datei + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_el.ts b/src/Mod/Path/Gui/Resources/translations/Path_el.ts index eb41738eda..f54e4d31bf 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_el.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_el.ts @@ -4508,7 +4508,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -5288,7 +5288,7 @@ For example: List of disabled features - + The G-code to be inserted The G-code to be inserted @@ -7025,17 +7025,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8215,12 +8215,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8415,4 +8415,27 @@ Aborting op creation %s has no property %s (%s) + + PathCustom + + + Text + Κείμενο + + + + File + Αρχείο + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_es-AR.ts b/src/Mod/Path/Gui/Resources/translations/Path_es-AR.ts index f3cc1d9089..b0cd99920c 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_es-AR.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_es-AR.ts @@ -4506,7 +4506,7 @@ Por ejemplo: Perfilar el modelo completo, la(s) cara(s) seleccionada(s) o el/los borde(s) seleccionado(s) - + Choose a Path Job Elegir una Ruta de Trabajo @@ -5286,7 +5286,7 @@ Por ejemplo: Lista de funciones desactivadas - + The G-code to be inserted El G-code a ser insertado @@ -7023,17 +7023,17 @@ Por ejemplo: Inglete - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. La(s) arista(s) seleccionada(s) es(son) inaccesible(s). Si son múltiples, la selección de reordenación podría funcionar. - + Unable to create path for face(s). No se puede crear la ruta para la(s) cara(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Comprobar la selección de bordes y los requisitos de profundidad final para los perfiles de los bordes abiertos. @@ -8212,12 +8212,12 @@ Abortando la creación de la op Path_Post - + Post Process Post procesador - + Post Process the selected Job Postprocesar el trabajo seleccionado @@ -8412,4 +8412,27 @@ Abortando la creación de la op %s no tiene la propiedad %s (%s) + + PathCustom + + + Text + Texto + + + + File + Archivo + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts index 4e7f152c1d..0e06153c96 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts @@ -4506,7 +4506,7 @@ Por ejemplo: Perfilar el modelo completo, la(s) cara(s) seleccionada(s) o el/los borde(s) seleccionado(s) - + Choose a Path Job Elegir una Ruta de Trabajo @@ -5286,7 +5286,7 @@ Por ejemplo: Lista de funciones desactivadas - + The G-code to be inserted El G-code a ser insertado @@ -7023,17 +7023,17 @@ Por ejemplo: Inglete - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. La(s) arista(s) seleccionada(s) es(son) inaccesible(s). Si son múltiples, la selección de reordenación podría funcionar. - + Unable to create path for face(s). No se puede crear la ruta para la(s) cara(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Comprobar la selección de bordes y los requisitos de profundidad final para los perfiles de los bordes abiertos. @@ -8212,12 +8212,12 @@ Abortando la creación de la op Path_Post - + Post Process Post procesador - + Post Process the selected Job Postprocesar el trabajo seleccionado @@ -8412,4 +8412,27 @@ Abortando la creación de la op %s no tiene la propiedad %s (%s) + + PathCustom + + + Text + Texto + + + + File + Archivo + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_eu.ts b/src/Mod/Path/Gui/Resources/translations/Path_eu.ts index 9f461ee031..85e5d95af1 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_eu.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_eu.ts @@ -4506,7 +4506,7 @@ Adibidez: Profilatu eredu osoa, aurpegi hautatua(k) edo ertz hautatua(k) - + Choose a Path Job Aukeratu bide-lan bat @@ -5286,7 +5286,7 @@ Adibidez: Desgaitutako elementuen zerrenda - + The G-code to be inserted Txertatuko den G-code kodea @@ -7022,17 +7022,17 @@ Adibidez: Zorrotza - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. Ertz hautatua(k) ezin dira eskuratu. Anitz badira, hautapena berrordenatzeak arazoa konpondu dezake. - + Unable to create path for face(s). Ezin izan da sortu bidea aurpegietarako. - + Check edge selection and Final Depth requirements for profiling open edge(s). Egiaztatu ertz irekia(k) profilatzeko behar diren ertz-hautapena eta amaierako sakonera. @@ -8212,12 +8212,12 @@ Aukeren sorrera abortatzen Path_Post - + Post Process Post-prozesua - + Post Process the selected Job Post-prozesatu hautatutako lana @@ -8412,4 +8412,27 @@ Sortu? %s-(e)k ez dauka %s propietatea (%s) + + PathCustom + + + Text + Testua + + + + File + Fitxategia + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fi.ts b/src/Mod/Path/Gui/Resources/translations/Path_fi.ts index f79abe9801..6e2b2f3561 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fi.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fi.ts @@ -4508,7 +4508,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -5288,7 +5288,7 @@ For example: List of disabled features - + The G-code to be inserted The G-code to be inserted @@ -7025,17 +7025,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8215,12 +8215,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8415,4 +8415,27 @@ Aborting op creation %s ei sisällä ominaisuutta %s (%s) + + PathCustom + + + Text + Teksti + + + + File + Tiedosto + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fr.ts b/src/Mod/Path/Gui/Resources/translations/Path_fr.ts index abe5b0c67a..b5c4eba285 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fr.ts @@ -4494,15 +4494,15 @@ préférences. Par exemple : Profile - Contour + Contournage Profile entire model, selected face(s) or selected edge(s) - Profiler l'intégralité du modèle, de la face ou des faces sélectionnée(s) ou de l'arête ou des arêtes sélectionnée(s) + Opération de contour sur l'intégralité du modèle, d'une/des face(s) sélectionnée(s) ou d'une/des arête(s) sélectionnée(s) - + Choose a Path Job Choisir une tâche de trajectoire @@ -5282,7 +5282,7 @@ préférences. Par exemple : Liste des fonctions désactivées - + The G-code to be inserted Le gcode à insérer @@ -6885,7 +6885,7 @@ Les valeurs seront converties dans l'unité souhaitée pendant le post-traitemen Mist - Brouillard + Pulvérisation @@ -7018,17 +7018,17 @@ Les valeurs seront converties dans l'unité souhaitée pendant le post-traitemen Coupe d’onglet - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - Le ou les bords sélectionnés sont inaccessibles. S'il y en a plusieurs, réorganiser la sélection pourrait fonctionner. + Le(s) bord(s) sélectionné(s) sont inaccessible(s). S'il y en a plusieurs, réorganiser la sélection pourrait fonctionner. - + Unable to create path for face(s). Impossible de créer le parcours pour la(les) face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Vérifier la sélection des bords et les exigences pour la profondeur finale du ou des bord(s) ouvert(s) à profiler. @@ -8208,12 +8208,12 @@ Abandon de la création de l'opération Path_Post - + Post Process Post-traitement - + Post Process the selected Job Post-traitement de la tâche sélectionnée @@ -8408,4 +8408,27 @@ Abandon de la création de l'opération %s n'a pas de propriété %s (%s) + + PathCustom + + + Text + Texte + + + + File + Fichier + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_gl.ts b/src/Mod/Path/Gui/Resources/translations/Path_gl.ts index 98be5d0fce..ae616612af 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_gl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_gl.ts @@ -4508,7 +4508,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -5288,7 +5288,7 @@ For example: List of disabled features - + The G-code to be inserted The G-code to be inserted @@ -7025,17 +7025,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8215,12 +8215,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8415,4 +8415,27 @@ Aborting op creation %s has no property %s (%s) + + PathCustom + + + Text + Texto + + + + File + Ficheiro + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hr.ts b/src/Mod/Path/Gui/Resources/translations/Path_hr.ts index 7b896f3fc6..5a78459859 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_hr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_hr.ts @@ -4512,7 +4512,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Izaberi posao Staze @@ -5292,7 +5292,7 @@ For example: List of disabled features - + The G-code to be inserted The G-code to be inserted @@ -7029,17 +7029,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8219,12 +8219,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8419,4 +8419,27 @@ Aborting op creation %s has no property %s (%s) + + PathCustom + + + Text + Tekst + + + + File + Datoteka + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hu.ts b/src/Mod/Path/Gui/Resources/translations/Path_hu.ts index 76f5a2647a..bd74fbd105 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_hu.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_hu.ts @@ -4500,7 +4500,7 @@ Például: Használja ki a teljes modellt, jelölje ki a felülete(ke)t vagy a kijelölt él(ek)et - + Choose a Path Job Tevékenység elérési útjának kijelölése @@ -5280,7 +5280,7 @@ Például: Kikapcsolt funkciók listája - + The G-code to be inserted A beillesztendő G-kód @@ -7017,17 +7017,17 @@ Például: Gérvágó - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. A kijelölt szegély(ek) nem érhetők el. Ha többszörös, a kijelölés újrarendelése működhet. - + Unable to create path for face(s). Nem hozható létre a felület(ek) útvonala. - + Check edge selection and Final Depth requirements for profiling open edge(s). Ellenőrizze az élkiválasztást és a végső mélységi követelményeket a nyitott él(ek) maráshoz. @@ -8207,12 +8207,12 @@ Az op-létrehozás megszakítása Path_Post - + Post Process Utófeldolgozó - + Post Process the selected Job Kijelölt feladat utó eljárása @@ -8407,4 +8407,27 @@ Az op-létrehozás megszakítása %s még nincs tulajdonsága %s (%s) + + PathCustom + + + Text + Szöveg + + + + File + Fájl + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_it.ts b/src/Mod/Path/Gui/Resources/translations/Path_it.ts index 62bc848fec..2a185a1967 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_it.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_it.ts @@ -4508,7 +4508,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Scegli un Percorso di Lavorazione @@ -5288,7 +5288,7 @@ For example: List of disabled features - + The G-code to be inserted The G-code to be inserted @@ -7025,17 +7025,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8215,12 +8215,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8415,4 +8415,27 @@ Aborting op creation %s non ha proprietà %s (%s) + + PathCustom + + + Text + Testo + + + + File + File + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ja.ts b/src/Mod/Path/Gui/Resources/translations/Path_ja.ts index 58e99ce1d7..feb6f968b4 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ja.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ja.ts @@ -4508,7 +4508,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -5288,7 +5288,7 @@ For example: List of disabled features - + The G-code to be inserted The G-code to be inserted @@ -7025,17 +7025,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8215,12 +8215,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8415,4 +8415,27 @@ Aborting op creation %s has no property %s (%s) + + PathCustom + + + Text + テキスト + + + + File + ファイル + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ka.ts b/src/Mod/Path/Gui/Resources/translations/Path_ka.ts index d93fb713b0..ae03f2a7ca 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ka.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ka.ts @@ -4506,7 +4506,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job აირჩიეთ ტრაექტორიის ამოცანა @@ -5286,7 +5286,7 @@ For example: გამორთული თვისებების სია - + The G-code to be inserted G-Code-ის ჩაისმება @@ -7023,17 +7023,17 @@ For example: ირიბპირა - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). ტრაექტორიის შექმნა ზედაპირ(ებ)-ისთვის შეუძლებელია. - + Check edge selection and Final Depth requirements for profiling open edge(s). ღია წიბოების პროფილირებისთვის წიბოს არჩევანისა და საბოლოო სიღრმის მოთხოვნების შემოწმება. @@ -8213,12 +8213,12 @@ Aborting op creation Path_Post - + Post Process დამუშავების შემდეგი მოქმედებები - + Post Process the selected Job მონიშნული დავალების პოსტპროცესი @@ -8413,4 +8413,27 @@ Aborting op creation %s-ს არ გააჩნია თვისება %s (%s) + + PathCustom + + + Text + ტექსტი + + + + File + ფაილი + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ko.ts b/src/Mod/Path/Gui/Resources/translations/Path_ko.ts index 9aba5f5357..996e02b8c6 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ko.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ko.ts @@ -4508,7 +4508,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -5288,7 +5288,7 @@ For example: List of disabled features - + The G-code to be inserted The G-code to be inserted @@ -7025,17 +7025,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8215,12 +8215,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8415,4 +8415,27 @@ Aborting op creation %s has no property %s (%s) + + PathCustom + + + Text + 텍스트 + + + + File + 파일 + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_nl.ts b/src/Mod/Path/Gui/Resources/translations/Path_nl.ts index 0691ea0cb6..88ecfcdb56 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_nl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_nl.ts @@ -1992,7 +1992,7 @@ Default: OpToolDiameter Expression - Expression + Expressie @@ -4114,7 +4114,7 @@ Default: OpToolDiameter Expression - Expression + Expressie @@ -4508,7 +4508,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -5288,7 +5288,7 @@ For example: List of disabled features - + The G-code to be inserted The G-code to be inserted @@ -7025,17 +7025,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8215,12 +8215,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8415,4 +8415,27 @@ Aborting op creation %s heeft geen eigenschap %s (%s) + + PathCustom + + + Text + Tekst + + + + File + Bestand + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pl.ts b/src/Mod/Path/Gui/Resources/translations/Path_pl.ts index 3e5d9e87ef..f417f42e95 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pl.ts @@ -116,7 +116,10 @@ Select a template to be used for the job. In case there are no templates you can create one through the popup menu of an existing job. Name the file job_*.json and place it in the macro or the path directory (see preferences) in order to be selectable from this list. - Wybierz szablon, który będzie używany dla zadania. W przypadku braku szablonów można je utworzyć za pomocą menu podręcznego istniejącego zadania. Nazwij plik job_*.json i umieść go w katalogu "makro" lub "path" (patrz preferencje), aby można go było wybrać z tej listy. + Wybierz szablon, który będzie używany dla zadania. W przypadku braku szablonów +można je utworzyć za pomocą menu podręcznego istniejącego zadania. +Nazwij plik job_*.json i umieść go w katalogu "makro" lub "path" (patrz preferencje), +aby można go było wybrać z tej listy. @@ -1957,7 +1960,7 @@ Przekroczenie wartości 100% powoduje, że dwa różne cykle nie nakładają si Depths - Głębia + Głębokość @@ -2371,7 +2374,7 @@ Jeśli promień jest większy niż ten, który utrzymuje sam kształt podpory, w Path - Ścieżka + CAM @@ -2974,7 +2977,7 @@ Should multiple tools or tool shapes with the same name exist in different direc Arc - Wzdłuż łuku + Łuk @@ -3359,7 +3362,7 @@ Should multiple tools or tool shapes with the same name exist in different direc Depths - Głębia + Głębokość @@ -3944,7 +3947,7 @@ FreeCAD has no knowledge of where a particular coordinate system exists within t Depths - Głębia + Głębokość @@ -4506,7 +4509,7 @@ Na przykład: Profiluj cały model, wybrane ściany lub wybrane krawędzie - + Choose a Path Job Wybierz ścieżkę zadania @@ -5286,7 +5289,7 @@ Na przykład: Lista wyłączonych funkcji - + The G-code to be inserted G-code do wstawienia @@ -7026,17 +7029,17 @@ OL Dropcutter* lub Eksperymentalny (nieoparty na OCL). Ukośnie - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. Wybrana krawędź (krawędzie) jest niedostępna. Jeśli jest ich wiele, zmiana kolejności wyboru może przynieść efekty. - + Unable to create path for face(s). Nie można utworzyć ścieżki dla powierzchni. - + Check edge selection and Final Depth requirements for profiling open edge(s). Sprawdź wybór krawędzi i wymagania dotyczące głębokości końcowej dla profilowania otwartych krawędzi. @@ -7968,7 +7971,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Depths - Głębia + Głębokość @@ -8216,12 +8219,12 @@ Przerwanie procesu tworzenia Path_Post - + Post Process Przetwarzanie końcowe - + Post Process the selected Job Przetwarzanie końcowe wybranego zadania @@ -8416,4 +8419,27 @@ Przerwanie procesu tworzenia %s nie ma właściwości %s (%s) + + PathCustom + + + Text + Tekst + + + + File + Plik + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts index 85813410b0..02e2303cc1 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts @@ -653,27 +653,27 @@ For stock from the Base object's bounding box it means the extra material in all Radius of the Cylinder - Radius of the Cylinder + Raio do Cilindro Height of the Cylinder - Height of the Cylinder + Altura do Cilindro Length of the Box - Length of the Box + Comprimento da Caixa Width of the Box - Width of the Box + Largura da Caixa Height of the Box - Height of the Box + Altura da Caixa @@ -4508,7 +4508,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Escolha uma tarefa de trajetória @@ -5288,7 +5288,7 @@ For example: List of disabled features - + The G-code to be inserted The G-code to be inserted @@ -7025,17 +7025,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8215,12 +8215,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8415,4 +8415,27 @@ Aborting op creation %s has no property %s (%s) + + PathCustom + + + Text + Texto + + + + File + Arquivo + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts index d9e328ed6e..c00406509c 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts @@ -4508,7 +4508,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -5288,7 +5288,7 @@ For example: List of disabled features - + The G-code to be inserted The G-code to be inserted @@ -7025,17 +7025,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8215,12 +8215,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8415,4 +8415,27 @@ Aborting op creation %s não tem propriedade %s (%s) + + PathCustom + + + Text + Texto + + + + File + Ficheiro + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ro.ts b/src/Mod/Path/Gui/Resources/translations/Path_ro.ts index c1ffff846e..0d9f1d7632 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ro.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ro.ts @@ -4511,7 +4511,7 @@ De exemplu: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Alege o lucrare de traiectorie @@ -5291,7 +5291,7 @@ De exemplu: List of disabled features - + The G-code to be inserted Se introduce codul G-code @@ -7028,17 +7028,17 @@ De exemplu: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8218,12 +8218,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8418,4 +8418,27 @@ Aborting op creation %s has no property %s (%s) + + PathCustom + + + Text + Text + + + + File + Fişier + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ru.ts b/src/Mod/Path/Gui/Resources/translations/Path_ru.ts index f780ea3133..abb7ed84b3 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ru.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ru.ts @@ -4498,7 +4498,7 @@ For example: Обработать всю модель, выбранные грани или выбранные края - + Choose a Path Job Выбрать задание Path @@ -5278,7 +5278,7 @@ For example: Список отключенных функций - + The G-code to be inserted Gcode будет вставлен @@ -7015,17 +7015,17 @@ For example: Срез - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. Выбранные ребра недоступны. Если их несколько, может работать переупорядочение выбора. - + Unable to create path for face(s). Не удалось создать путь для грани(-ей). - + Check edge selection and Final Depth requirements for profiling open edge(s). Проверьте выбор кромки и требования к конечной глубине для профилирования открытых кромок. @@ -8205,12 +8205,12 @@ Aborting op creation Path_Post - + Post Process Пост-процесс - + Post Process the selected Job Постобработка выбранного Задания @@ -8405,4 +8405,27 @@ Aborting op creation %s не имеет свойства %s (%s) + + PathCustom + + + Text + Текст + + + + File + Файл + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sl.ts b/src/Mod/Path/Gui/Resources/translations/Path_sl.ts index f3d8afbdc5..60a2e50d13 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sl.ts @@ -4508,7 +4508,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Izberite opravilo poti @@ -5024,7 +5024,7 @@ For example: A material for this object - A material for this object + Snov tega predmeta @@ -5288,7 +5288,7 @@ For example: List of disabled features - + The G-code to be inserted The G-code to be inserted @@ -7025,17 +7025,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8215,12 +8215,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8415,4 +8415,27 @@ Aborting op creation %s nima lastnosti %s (%s) + + PathCustom + + + Text + Besedilo + + + + File + Datoteka + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sr-CS.ts b/src/Mod/Path/Gui/Resources/translations/Path_sr-CS.ts index 95705103fa..d2267c2d4d 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sr-CS.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sr-CS.ts @@ -4508,7 +4508,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -5288,7 +5288,7 @@ For example: List of disabled features - + The G-code to be inserted G-kod koji treba umetnuti @@ -7025,17 +7025,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8215,12 +8215,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8415,4 +8415,27 @@ Aborting op creation %s has no property %s (%s) + + PathCustom + + + Text + Tekst + + + + File + Datoteka + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sr.ts b/src/Mod/Path/Gui/Resources/translations/Path_sr.ts index 178cca234a..37535d4bac 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sr.ts @@ -4508,7 +4508,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -5288,7 +5288,7 @@ For example: List of disabled features - + The G-code to be inserted Г-код који треба уметнути @@ -7025,17 +7025,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8215,12 +8215,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8415,4 +8415,27 @@ Aborting op creation %s has no property %s (%s) + + PathCustom + + + Text + Текст + + + + File + Датотека + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts index 4010ff913e..2f4cce25e8 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts @@ -4508,7 +4508,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -5288,7 +5288,7 @@ For example: List of disabled features - + The G-code to be inserted The G-code to be inserted @@ -7025,17 +7025,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8215,12 +8215,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8415,4 +8415,27 @@ Aborting op creation %s has no property %s (%s) + + PathCustom + + + Text + Text + + + + File + Fil + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_tr.ts b/src/Mod/Path/Gui/Resources/translations/Path_tr.ts index 7dba3921d6..1314e5bfdf 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_tr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_tr.ts @@ -4508,7 +4508,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Bir İz İşi Seçiniz @@ -5288,7 +5288,7 @@ For example: List of disabled features - + The G-code to be inserted The G-code to be inserted @@ -7025,17 +7025,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8215,12 +8215,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8415,4 +8415,27 @@ Aborting op creation %s has no property %s (%s) + + PathCustom + + + Text + Metin + + + + File + Dosya + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_uk.ts b/src/Mod/Path/Gui/Resources/translations/Path_uk.ts index 1e23952bea..30b8f74d6c 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_uk.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_uk.ts @@ -4509,7 +4509,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -5289,7 +5289,7 @@ For example: List of disabled features - + The G-code to be inserted The G-code to be inserted @@ -7026,17 +7026,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8216,12 +8216,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8416,4 +8416,27 @@ Aborting op creation %s не має властивості %s (%s) + + PathCustom + + + Text + Текст + + + + File + Файл + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts index 1c0fd569ad..7cf7427dd4 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts @@ -4508,7 +4508,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -5288,7 +5288,7 @@ For example: List of disabled features - + The G-code to be inserted The G-code to be inserted @@ -7025,17 +7025,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8215,12 +8215,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8415,4 +8415,27 @@ Aborting op creation %s has no property %s (%s) + + PathCustom + + + Text + Text + + + + File + Fitxer + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts index ee6761df14..3dea881309 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts @@ -4508,7 +4508,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -5288,7 +5288,7 @@ For example: List of disabled features - + The G-code to be inserted The G-code to be inserted @@ -7025,17 +7025,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8215,12 +8215,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8415,4 +8415,27 @@ Aborting op creation %s 没有属性 %s (%s) + + PathCustom + + + Text + 文本 + + + + File + 文件 + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts index 38937a55d3..8e85cf195c 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts @@ -4508,7 +4508,7 @@ For example: Profile entire model, selected face(s) or selected edge(s) - + Choose a Path Job Choose a Path Job @@ -5288,7 +5288,7 @@ For example: List of disabled features - + The G-code to be inserted The G-code to be inserted @@ -7025,17 +7025,17 @@ For example: Miter - + The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. The selected edge(s) are inaccessible. If multiple, re-ordering selection might work. - + Unable to create path for face(s). Unable to create path for face(s). - + Check edge selection and Final Depth requirements for profiling open edge(s). Check edge selection and Final Depth requirements for profiling open edge(s). @@ -8215,12 +8215,12 @@ Aborting op creation Path_Post - + Post Process Post Process - + Post Process the selected Job Post Process the selected Job @@ -8415,4 +8415,27 @@ Aborting op creation %s has no property %s (%s) + + PathCustom + + + Text + 文字 + + + + File + 檔案 + + + + Custom file %s could not be found. + Custom file %s could not be found. + + + + Invalid Gcode line: %s + Invalid Gcode line: %s + + diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts index f99762e066..553fff931a 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ca.ts @@ -71,7 +71,7 @@ Create carbon copy - Create carbon copy + Crea un calc @@ -230,7 +230,7 @@ Create conic - Create conic + Crea una cònica @@ -707,7 +707,7 @@ with respect to a line or a third point Create arc of ellipse - Create arc of ellipse + Crea un arc d'el·lipse @@ -720,7 +720,7 @@ with respect to a line or a third point Create arc of hyperbola - Create arc of hyperbola + Crea un arc d'hipèrbole @@ -733,7 +733,7 @@ with respect to a line or a third point Create arc of parabola - Create arc of parabola + Crea un arc de paràbola @@ -751,7 +751,7 @@ with respect to a line or a third point Create a B-spline by control points in the sketch. - Create a B-spline by control points in the sketch. + Crear un B-spline mitjançant punts de control del croquis. @@ -894,7 +894,7 @@ with respect to a line or a third point Create a periodic B-spline by control points in the sketch. - Create a periodic B-spline by control points in the sketch. + Crea una B-spline periòdica mitjançant punts de control del croquis. @@ -1097,7 +1097,7 @@ with respect to a line or a third point Create external geometry - Create external geometry + Crea una geometria externa @@ -3705,7 +3705,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Layer - Layer + Capa @@ -5922,7 +5922,7 @@ L'algoritme Eigen Sparse QR està optimitzat per a matrius escasses; generalment Sketcher edit mode - Sketcher edit mode + Mode d'edició del croquis @@ -5952,7 +5952,7 @@ L'algoritme Eigen Sparse QR està optimitzat per a matrius escasses; generalment Sketcher edit tools - Sketcher edit tools + Eines d'edició del croquis @@ -6089,7 +6089,7 @@ The grid spacing change if it becomes smaller than this number of pixel. Grid auto spacing - Grid auto spacing + Autoespaiat de la quadrícula @@ -6104,7 +6104,7 @@ The grid spacing change if it becomes smaller than this number of pixel. Distance between two subsequent grid lines. - Distance between two subsequent grid lines. + Distància entre dues línies de graella consecutives. @@ -6397,7 +6397,7 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle starts from the positive X axis of the sketch. - Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle starts from the positive X axis of the sketch. + Salt angular per eines que usen 'Ajusta a l'angle' (p. ex. línia). Prem CTRL per activar 'Ajusta a l'angle'. L'angle comença des de l'eix X positiu del croquis. @@ -6447,7 +6447,7 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna Toggle the grid in the sketch. In the menu you can change grid settings. - Toggle the grid in the sketch. In the menu you can change grid settings. + Commuta la graella del croquis. Pots canviar la configuració de la graella des del menú. @@ -6460,7 +6460,7 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna Toggle all snap functionality. In the menu you can toggle 'Snap to grid' and 'Snap to objects' individually, and change further snap settings. - Toggle all snap functionality. In the menu you can toggle 'Snap to grid' and 'Snap to objects' individually, and change further snap settings. + Commuta totes les funcions d'ajust. En el menú pots commutar individualment 'Ajusta a la graella' i 'Ajusta a objectes', i canviar altres configuracions d'ajust. @@ -6468,12 +6468,12 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna Create B-spline by knots - Create B-spline by knots + Crea una B-spline per nusos Create a B-spline by knots, i.e. by interpolation, in the sketch. - Create a B-spline by knots, i.e. by interpolation, in the sketch. + Crea una B-spline per nusos, p. ex. per interpolació, en el croquis. @@ -6481,12 +6481,12 @@ Points must be set closer than a fifth of the grid spacing to a grid line to sna Create periodic B-spline by knots - Create periodic B-spline by knots + Crea una B-spline periòdica per nusos Create a periodic B-spline by knots, i.e. by interpolation, in the sketch. - Create a periodic B-spline by knots, i.e. by interpolation, in the sketch. + Crea una B-spline periòdica per nusos, p. ex. per interpolació, en el croquis. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts index 0b926f7fea..da88067943 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts @@ -5931,7 +5931,7 @@ Eigen Sparse QR ein Algorithmus, der für dünn besetzte Matrizen optimiert ist; Sketcher edit mode - Sketcher-Modus Bearbeitung + Sketcher-Bearbeitungsmodus diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts index 03cffd1e7e..3defa70309 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts @@ -749,7 +749,7 @@ with respect to a line or a third point Create a B-spline by control points in the sketch. - Créer une B-spline par points de contrôle dans l'esquisse. + Créer une B-spline par des points de contrôle dans l'esquisse. @@ -892,7 +892,7 @@ with respect to a line or a third point Create a periodic B-spline by control points in the sketch. - Créer une B-spline périodique par points de contrôle dans l'esquisse. + Créer une B-spline périodique par des points de contrôle dans l'esquisse. @@ -6478,12 +6478,12 @@ Les points doivent être placés à moins d'un cinquième de l'espacement de la Create B-spline by knots - Créer une B-spline par noeuds + Créer une B-spline par des noeuds Create a B-spline by knots, i.e. by interpolation, in the sketch. - Créer une B-spline par noeuds, c'est-à-dire par interpolation, dans l'esquisse. + Créer une B-spline par des noeuds, c'est-à-dire par interpolation, dans l'esquisse. @@ -6491,12 +6491,12 @@ Les points doivent être placés à moins d'un cinquième de l'espacement de la Create periodic B-spline by knots - Créer une B-spline périodique par noeuds + Créer une B-spline périodique par des noeuds Create a periodic B-spline by knots, i.e. by interpolation, in the sketch. - Créer une B-spline périodique par noeuds, c'est-à-dire par interpolation, dans l'esquisse. + Créer une B-spline périodique par des noeuds, c'est-à-dire par interpolation, dans l'esquisse. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts index 3c4a7eff70..2989a6a386 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts @@ -71,7 +71,7 @@ Create carbon copy - Create carbon copy + Crea copia carbone @@ -230,7 +230,7 @@ Create conic - Create conic + Crea conica @@ -707,7 +707,7 @@ rispetto a una linea o a un terzo punto Create arc of ellipse - Create arc of ellipse + Crea arco di ellisse @@ -720,7 +720,7 @@ rispetto a una linea o a un terzo punto Create arc of hyperbola - Create arc of hyperbola + Crea arco di iperbola @@ -733,7 +733,7 @@ rispetto a una linea o a un terzo punto Create arc of parabola - Create arc of parabola + Crea arco di parabola @@ -751,7 +751,7 @@ rispetto a una linea o a un terzo punto Create a B-spline by control points in the sketch. - Create a B-spline by control points in the sketch. + Crea una B-spline dai punti di controllo nello schizzo. @@ -894,7 +894,7 @@ rispetto a una linea o a un terzo punto Create a periodic B-spline by control points in the sketch. - Create a periodic B-spline by control points in the sketch. + Crea una B-spline periodica dai punti di controllo nello schizzo. @@ -1097,7 +1097,7 @@ rispetto a una linea o a un terzo punto Create external geometry - Create external geometry + Crea geometria esterna @@ -5932,7 +5932,7 @@ L'algoritmo di Eigen Sparse QR è ottimizzato per matrici sparsi; solitamente pi Sketcher edit mode - Sketcher edit mode + Modalità modifica Sketcher @@ -5962,7 +5962,7 @@ L'algoritmo di Eigen Sparse QR è ottimizzato per matrici sparsi; solitamente pi Sketcher edit tools - Sketcher edit tools + Strumenti di modifica Sketcher @@ -6099,7 +6099,7 @@ La spaziatura della griglia cambia se diventa più piccola di questo numero di p Grid auto spacing - Grid auto spacing + Spaziatura automatica griglia @@ -6114,7 +6114,7 @@ La spaziatura della griglia cambia se diventa più piccola di questo numero di p Distance between two subsequent grid lines. - Distance between two subsequent grid lines. + Distanza tra due linee successive della griglia. @@ -6407,7 +6407,7 @@ I punti devono essere impostati più vicino di un quinto della spaziatura della Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle starts from the positive X axis of the sketch. - Angular step for tools that use 'Snap at Angle' (line for instance). Hold CTRL to enable 'Snap at Angle'. The angle starts from the positive X axis of the sketch. + Passo angolare per gli strumenti che usano 'Snap at Angle' (linea per esempio). Tieni premuto CTRL per abilitare 'Aggancia ad angolo'. L'angolo parte dall'asse X positivo dello schizzo. @@ -6457,7 +6457,7 @@ I punti devono essere impostati più vicino di un quinto della spaziatura della Toggle the grid in the sketch. In the menu you can change grid settings. - Toggle the grid in the sketch. In the menu you can change grid settings. + Attiva/disattiva la griglia nello schizzo. Nel menu puoi modificare le impostazioni della griglia. @@ -6470,7 +6470,7 @@ I punti devono essere impostati più vicino di un quinto della spaziatura della Toggle all snap functionality. In the menu you can toggle 'Snap to grid' and 'Snap to objects' individually, and change further snap settings. - Toggle all snap functionality. In the menu you can toggle 'Snap to grid' and 'Snap to objects' individually, and change further snap settings. + Attiva/disattiva tutte le funzionalità di snap. Nel menu puoi attivare 'Aggancia alla griglia' e 'Aggancia agli oggetti' individualmente, e modificare ulteriori impostazioni di snap. @@ -6478,12 +6478,12 @@ I punti devono essere impostati più vicino di un quinto della spaziatura della Create B-spline by knots - Create B-spline by knots + Crea B-spline con i nodi Create a B-spline by knots, i.e. by interpolation, in the sketch. - Create a B-spline by knots, i.e. by interpolation, in the sketch. + Creare una B-spline con i nodi, cioè per interpolazione, nello schizzo. @@ -6491,12 +6491,12 @@ I punti devono essere impostati più vicino di un quinto della spaziatura della Create periodic B-spline by knots - Create periodic B-spline by knots + Crea B-spline periodica con i nodi Create a periodic B-spline by knots, i.e. by interpolation, in the sketch. - Create a periodic B-spline by knots, i.e. by interpolation, in the sketch. + Creare una B-spline periodica con i nodi, cioè per interpolazione, nello schizzo. diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts index bd4a469082..aaa0f92c22 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ka.ts @@ -1744,7 +1744,7 @@ invalid constraints, degenerated geometry, etc. Swap coincident+tangency with ptp tangency - Swap coincident+tangency with ptp tangency + დამთხვევის+მხების ptp მხებთან მიმოცვლა @@ -5750,8 +5750,8 @@ BFGS ამომხსნელი იყენებს Broyden–Fletcher–G Threshold for squared error that is used to determine whether a solution converges or not - Threshold for squared error that is used -to determine whether a solution converges or not + ზღვარი კვადრტულობის შეცდომისთვის, +რომელიც გამოიყენება იმისა განსაზღვისთვის, არის გადაწყვეტა კონვერტენტული, თუ არა diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts index cd8e858bd5..6134060c9b 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts @@ -4766,7 +4766,7 @@ Nie znaleziono jednak żadnych powiązań z punktami końcowymi. Arc - Wzdłuż łuku + Łuk diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts index f8a68a07ec..ad63a4a3b4 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_tr.ts @@ -6296,7 +6296,7 @@ The grid spacing change if it becomes smaller than this number of pixel. Failed to create fillet - Failed to create fillet + Yuvarlama oluşturma hatası diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts index d188fab546..7f4325a5ec 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-TW.ts @@ -408,7 +408,7 @@ Block the selected edge from moving - Block the selected edge from moving + 阻止選定邊的移動 diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ca.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ca.ts index 3441412697..58fa7b5dd1 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ca.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_ca.ts @@ -391,32 +391,32 @@ Bind Spreadsheet Cells - Bind Spreadsheet Cells + Enllaça cel·les del full de càlcul To cells: - To cells: + Fins les cel·les: Sheet: - Sheet: + Full: First cell in range - First cell in range + Primera cel·la del rang Last cell in range - Last cell in range + Última cel·la del rang Bind cells: - Bind cells: + Enllaça cel·les: @@ -449,7 +449,7 @@ The expression must evaluate to a string of some cell address. Which spread sheet to bind to - Which spread sheet to bind to + A quin full de càlcul s'ha de vincular @@ -467,7 +467,7 @@ Useful to avoid cyclic dependencies, but use with caution! Unbind - Unbind + Desvincula @@ -485,12 +485,12 @@ Useful to avoid cyclic dependencies, but use with caution! Setup Configuration Table - Setup Configuration Table + Configura la Taula de Configuració Cell range: - Cell range: + Rang de cel·les: @@ -537,7 +537,7 @@ by that property. Property: - Property: + Propietat: @@ -549,12 +549,12 @@ switch the design configuration. The property will be created if not exist. Group: - Group: + Grup: Optional property group name. - Optional property group name. + Camp opcional pel nom del Grup de Propietats. @@ -885,7 +885,7 @@ Spreadsheet.my_alias_name enlloc de Spreadsheet.B1 Bind cells - Bind cells + Vincula cel·les @@ -898,7 +898,7 @@ Vols continuar? Bind Spreadsheet Cells - Bind Spreadsheet Cells + Enllaça cel·les del full de càlcul @@ -910,7 +910,7 @@ Vols continuar? Unbind cells - Unbind cells + Desvincula cel·les @@ -923,7 +923,7 @@ Vols continuar? Display Settings - Display Settings + Mostra la configuració @@ -951,7 +951,7 @@ Defaults to: %V = %A Import/Export Settings - Import/Export Settings + Configuració d'Importació/Exportació @@ -994,7 +994,7 @@ Defaults to: %V = %A Setup configuration table - Setup configuration table + Configura la taula de configuració @@ -1007,65 +1007,65 @@ Defaults to: %V = %A Insert %n row(s) above - + Insereix %n fila/es a sobre - Insert %n row(s) above + Insereix %n files a sobre Insert %n row(s) below - + Insereix %n fila/es a sota - Insert %n row(s) below + Insereix %n files a sota Insert %n non-contiguous rows - + + Insereix %n fila no contingua Insereix %n files no contingues - Insert %n non-contiguous rows Remove row(s) - + Elimina fila/es - Remove row(s) + Elimina files Insert %n column(s) left - + Insereix %n columna/es a l'esquerra - Insert %n column(s) left + Insereix %n columnes a l'esquerra Insert %n column(s) right - + Insereix %n columna/es a la dreta - Insert %n column(s) right + Insereix %n columnes a la dreta Insert %n non-contiguous columns - + + Insereix %n columnes no contingues Insereix %n columnes no contingues - Insert %n non-contiguous columns Remove column(s) - + Elimina columna/es - Remove column(s) + Elimina les columnes @@ -1078,19 +1078,19 @@ Defaults to: %V = %A Recompute - Recompute + Recalcula Bind... - Bind... + Vincula... Configuration table... - Configuration table... + Taula de configuració... @@ -1102,7 +1102,7 @@ Defaults to: %V = %A Split cells - Split cells + Separa cel·les @@ -1152,7 +1152,7 @@ Defaults to: %V = %A &Spreadsheet - &Spreadsheet + &Full de càlcul @@ -1162,7 +1162,7 @@ Defaults to: %V = %A &Styles - &Styles + &Estils diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_nl.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_nl.ts index 458005f557..73e577b85e 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_nl.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_nl.ts @@ -491,7 +491,7 @@ Useful to avoid cyclic dependencies, but use with caution! Cell range: - Cell range: + Celbereik: diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_ca.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_ca.ts index ff6196cd08..97bbdd3dca 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_ca.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_ca.ts @@ -91,12 +91,12 @@ By using ";;" to separate paths, you can add several folders here Displays help tips in the Start workbench Documents tab - Displays help tips in the Start workbench Documents tab + Mostra consells d'ajuda a la pestanya Documents del banc de treball Start Show scrollbars - Show scrollbars + Mostra les barres de desplaçament @@ -266,7 +266,7 @@ By using ";;" to separate paths, you can add several folders here If checked, will automatically close the Start page when FreeCAD launches - If checked, will automatically close the Start page when FreeCAD launches + Si està marcat, tancarà automàticament la pàgina d'inici quan s'iniciï FreeCAD @@ -393,27 +393,27 @@ By using ";;" to separate paths, you can add several folders here The <a href="http://forum.freecad.org">FreeCAD forum</a> is a great place to get help from other FreeCAD users and developers. The forum has many sections for different types of issues and discussion subjects. If in doubt, post in the more general <a href="https://forum.freecad.org/viewforum.php?f=3">Help on using FreeCAD</a> section. - The <a href="http://forum.freecad.org">FreeCAD forum</a> is a great place to get help from other FreeCAD users and developers. The forum has many sections for different types of issues and discussion subjects. If in doubt, post in the more general <a href="https://forum.freecad.org/viewforum.php?f=3">Help on using FreeCAD</a> section. + El <a href="http://forum.freecad.org">fòrum de FreeCAD</a> és un lloc fantàstic per obtenir ajuda d'altres usuaris i desenvolupadors de FreeCAD. El fòrum té moltes seccions per a diferents tipus de qüestions i temes de discussió. En cas de dubte, publica a la secció més general <a href="https://forum.freecad.org/viewforum.php?f=3">Ajuda per utilitzar FreeCAD</a>. If it is the first time you are posting on the forum, be sure to <a href="https://forum.freecad.org/viewtopic.php?f=3&t=2264">read the guidelines</a> first! - If it is the first time you are posting on the forum, be sure to <a href="https://forum.freecad.org/viewtopic.php?f=3&t=2264">read the guidelines</a> first! + Si és la primera vegada que publiques al fòrum, assegura't de llegir primer <a href="https://forum.freecad.org/viewtopic.php?f=3&t=2264">les instruccions i normes</a>! FreeCAD also maintains a public <a href="https://www.freecad.org/tracker">bug tracker</a> where anybody can submit bugs and propose new features. To avoid causing extra work and give the best chances to see your bug solved, make sure you read the <a href="https://forum.freecad.org/viewtopic.php?f=3&t=5236">bug submission guide</a> before posting. - FreeCAD also maintains a public <a href="https://www.freecad.org/tracker">bug tracker</a> where anybody can submit bugs and propose new features. To avoid causing extra work and give the best chances to see your bug solved, make sure you read the <a href="https://forum.freecad.org/viewtopic.php?f=3&t=5236">bug submission guide</a> before posting. + FreeCAD també manté un <a href="https://www.freecad.org/tracker">seguidor d'errors</a> públic on qualsevol persona pot enviar errors i proposar noves funcions. Per evitar que es produeixi treball addicional i donar les millors oportunitats de veure el vostre error resolt, assegura'ts de llegir la <a href="https://forum.freecad.org/viewtopic.php?f=3&t=5236">guia d'enviament d'errors </a> abans de publicar. Below are the latest changes added to the <a href="http://github.com/FreeCAD/FreeCAD/">FreeCAD source code</a>. These changes might not reflect yet in the FreeCAD version that you are currently running. Check the <a href="https://www.freecad.org/wiki/Downloads">available options</a> if you wish to obtain a development version. - Below are the latest changes added to the <a href="http://github.com/FreeCAD/FreeCAD/">FreeCAD source code</a>. These changes might not reflect yet in the FreeCAD version that you are currently running. Check the <a href="https://www.freecad.org/wiki/Downloads">available options</a> if you wish to obtain a development version. + A continuació es mostren els darrers canvis afegits al <a href="http://github.com/FreeCAD/FreeCAD/">codi font de FreeCAD</a>. És possible que aquests canvis encara no es reflecteixin a la versió de FreeCAD que estàs executant actualment. Comprova les <a href="https://www.freecad.org/wiki/Downloads">opcions disponibles</a> si vols obtenir una versió en desenvolupament. The latest posts on the <a href="https://forum.freecad.org">FreeCAD forum</a>: - The latest posts on the <a href="https://forum.freecad.org">FreeCAD forum</a>: + Els articles més recents al <a href="https://forum.freecad.org">fòrum FreeCAD</a>: diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_es-AR.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_es-AR.ts index c307a4b9b5..847abb47f7 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_es-AR.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_es-AR.ts @@ -6,7 +6,7 @@ Start - Iniciar + Inicio @@ -251,12 +251,12 @@ Al usar ";;" para separar las rutas, puede añadir varias carpetas aquí Switch workbench after loading - Cambiar el entorno de trabajo después de cargar + Cambiar el banco de trabajo después de cargar Choose which workbench to switch to after the program launches - Elegí el entorno de trabajo al que cambiar después del lanzamiento del programa + Elige el banco de trabajo al que cambiar después del lanzamiento del programa @@ -293,7 +293,7 @@ Al usar ";;" para separar las rutas, puede añadir varias carpetas aquí Start - Iniciar + Inicio @@ -343,7 +343,7 @@ Al usar ";;" para separar las rutas, puede añadir varias carpetas aquí This section contains documentation useful for FreeCAD users in general: a list of all the workbenches, detailed instructions on how to install and use the FreeCAD application, tutorials, and all you need to get started. - Esta sección contiene documentación útil para los usuarios de FreeCAD en general: una lista de todos los entornos de trabajo, instrucciones detalladas sobre cómo instalar y usar FreeCAD, tutoriales y todo lo que necesitás para empezar. + Esta sección contiene documentación útil para los usuarios de FreeCAD en general: una lista de todos los bancos de trabajo, instrucciones detalladas sobre cómo instalar y usar FreeCAD, tutoriales y todo lo que necesitás para empezar. @@ -378,7 +378,7 @@ Al usar ";;" para separar las rutas, puede añadir varias carpetas aquí Workbenches documentation - Documentación de entornos de trabajo + Documentación de bancos de trabajo @@ -428,7 +428,7 @@ Al usar ";;" para separar las rutas, puede añadir varias carpetas aquí If not bundled with your FreeCAD version, install the FreeCAD documentation package to get documentation hubs, workbench help and individual command documentation without an internet connection. - Si no está incluido con tu versión de FreeCAD, instalá el paquete de documentación de FreeCAD para obtener los centros de documentación, la ayuda de entorno de trabajo y la documentación de comandos individuales sin conexión a Internet. + Si no está incluido con tu versión de FreeCAD, instalá el paquete de documentación de FreeCAD para obtener los centros de documentación, la ayuda del banco de trabajo y la documentación de comandos individuales sin conexión a Internet. @@ -506,7 +506,7 @@ Al usar ";;" para separar las rutas, puede añadir varias carpetas aquí Start - Iniciar + Inicio diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_tr.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_tr.ts index 291f427419..fa9a652f4f 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_tr.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_tr.ts @@ -96,7 +96,7 @@ Yolları ayırmak için ";;" (çift noktalı virgül) kullanarak birden fazla di Show scrollbars - Show scrollbars + Kaydırma çubuklarını göster @@ -398,7 +398,7 @@ Yolları ayırmak için ";;" (çift noktalı virgül) kullanarak birden fazla di If it is the first time you are posting on the forum, be sure to <a href="https://forum.freecad.org/viewtopic.php?f=3&t=2264">read the guidelines</a> first! - If it is the first time you are posting on the forum, be sure to <a href="https://forum.freecad.org/viewtopic.php?f=3&t=2264">read the guidelines</a> first! + Eğer bu, forumda yayınlayacağınız ilk gönderi ise, öncelikle < A href="http://forum.freecadweb.org/viewtopic.php?f=3&t=2264" > yönergeleri okuyun! < / a >! @@ -413,7 +413,7 @@ Yolları ayırmak için ";;" (çift noktalı virgül) kullanarak birden fazla di The latest posts on the <a href="https://forum.freecad.org">FreeCAD forum</a>: - The latest posts on the <a href="https://forum.freecad.org">FreeCAD forum</a>: + <a href="https://forum.freecad.org">FreeCAD forum</a> Sayfasındaki son gönderiler: diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts index 63b4bec675..424a43c9c4 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf @@ -2086,7 +2086,7 @@ - + Create CenterLine @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex + + + TechDraw Insert Prefix + + Insert Prefix + + + TechDraw Remove Prefix + + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim + + + TechDraw Hole Circle + + Bolt Circle Centerlines + + + TechDraw Circle Centerlines + + Circle Centerlines + + + TechDraw Thread Hole Side + + Cosmetic Thread Hole Side + + + TechDraw Thread Bolt Side + + Cosmetic Thread Bolt Side + + + TechDraw Thread Hole Bottom + + Cosmetic Thread Hole Bottom + + + TechDraw Thread Bolt Bottom + + Cosmetic Thread Bolt Bottom + + + TechDraw Change Line Attributes + + Change Line Attributes + + + TechDraw Cosmetic Intersection Vertex(es) + + Cosmetic Intersection Vertex(es) + + + TechDraw Cosmetic Arc + + Cosmetic Arc + + + TechDraw Cosmetic Circle + + Cosmetic Circle + + + TechDraw Cosmetic Circle 3 Points + + Cosmetic Circle 3 Points + + + TechDraw Cosmetic Line Parallel/Perpendicular + + Cosmetic Line Parallel/Perpendicular + + + TechDraw Lock/Unlock View + + Lock/Unlock View + + + TechDraw Extend/Shorten Line + + Extend/Shorten Line + + + TechDraw calculate selected area + + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) @@ -3301,17 +3386,17 @@ - + Document Name: - + SVG (*.svg) - + Export page as SVG @@ -3400,7 +3485,7 @@ - + Edit Center Line @@ -3596,14 +3681,14 @@ - + Selection is empty - + No object selected @@ -3628,12 +3713,12 @@ - + TechDraw Thread Hole Side - + Please select two straight lines @@ -4705,13 +4790,6 @@ when hatching a face with a PAT pattern Color of vertices in views - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - - Detail Highlight @@ -4752,6 +4830,13 @@ when hatching a face with a PAT pattern Face color (if not transparent) + + + If checked FreeCAD will use a single color for all text and lines. + + + + Monochrome @@ -5444,49 +5529,49 @@ Fast, but result is a collection of short straight lines. - + Different orientation - + The printer uses a different orientation than the drawing. Do you want to continue? - + Different paper size - + The printer uses a different paper size than the drawing. Do you want to continue? - + Opening file failed - + Can not open file %1 for writing. - + Save DXF file - + DXF (*.dxf) - + Selected: @@ -8494,7 +8579,7 @@ using the given X/Y Spacing Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_be.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_be.ts index 4a7123037b..fd08de4e69 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_be.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_be.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf Захаваць старонку ў файл dxf @@ -2086,7 +2086,7 @@ Стварыць бягучы выгляд - + Create CenterLine Стварыць цэнтральную лінію @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Дадаць касметычную вяршыню + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Уставіць прыстаўку + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Стварыць вымярэнне даўжыні дугі + + + TechDraw Hole Circle + Акружнасць адтуліны Тэхнічнага чарцяжа + Bolt Circle Centerlines Цэнтральныя лініі адтуліны ў акружнасці + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Цэнтральныя лініі акружнасці + + + TechDraw Thread Hole Side + Тэхнічны чарцёж: Адтуліна з разьбой, выгляд збоку + Cosmetic Thread Hole Side Касметычная адтуліна з разьбой збоку + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Касметычная разьба збоку + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Касметычная адтуліна з разьбой знізу + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Касметычная разьба знізу + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Змяніць атрыбуты лініі + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Касметычнае перакрыжаванне вяршынь + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Касметычная дуга + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Касметычная акружнасць + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Касметычная акружнасць па трох кропках + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Касметычная паралельная/перпендыкулярная лінія + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Заблакаваць/разблакаваць выгляд + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Выцягнуць/скараціць лінію + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Усе файлы (*.*) @@ -3301,17 +3386,17 @@ Экспартаваць старонку ў DXF - + Document Name: Назва дакументу: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Экспартаваць старонку ў SVG @@ -3400,7 +3485,7 @@ Стварыць цэнтральную лінію - + Edit Center Line Змяніць цэнтральную лінію @@ -3596,14 +3681,14 @@ - + Selection is empty Выбар пусты - + No object selected Без абранага аб'екту @@ -3628,12 +3713,12 @@ Без граней у абраным. - + TechDraw Thread Hole Side Тэхнічны чарцёж: Адтуліна з разьбой, выгляд збоку - + Please select two straight lines Калі ласка, абярыце дзве прамыя лініі @@ -3741,7 +3826,7 @@ You cannot delete this leader line because it has a weld symbol that would become broken. - Вы не можаце выдаліць лінію зноскі, таму што на ёй ёсць знак зварнога шва, які можа стаць пашкоджаным. + Вы не можаце выдаліць лінію зноскі, бо на ёй ёсць знак зварнога шва, які можа стаць пашкоджаным. @@ -3766,17 +3851,17 @@ it has a weld symbol that would become broken. You cannot delete this view because it has a section view that would become broken. - Вы не можаце выдаліць выгляд, таму што ў яго ёсць прагляд перасеку, які можа стаць пашкоджаным. + Вы не можаце выдаліць выгляд, бо ў яго ёсць прагляд перасеку, які можа стаць пашкоджаным. You cannot delete this view because it has a detail view that would become broken. - Вы не можаце выдаліць выгляд, таму што ў яго ёсць вынасны элемент, які можа стаць пашкоджаным. + Вы не можаце выдаліць выгляд, бо ў яго ёсць вынасны элемент, які можа стаць пашкоджаным. You cannot delete this view because it has a leader line that would become broken. - Вы не можаце выдаліць выгляд, таму што ў яго ёсць лінія зноскі, якая можа стаць пашкоджанай. + Вы не можаце выдаліць выгляд, бо ў яго ёсць лінія зноскі, якая можа стаць пашкоджанай. @@ -3810,7 +3895,7 @@ it has a tile weld that would become broken. You cannot delete this view because it has one or more dependent objects that would become broken. - You cannot delete this view because it has one or more dependent objects that would become broken. + Вы не можаце выдаліць выгляд, бо ў ім ёсць адзін ці некалькі залежных аб'ектаў, якія могуць стаць пашкоджанымі. @@ -4724,16 +4809,6 @@ when hatching a face with a PAT pattern Color of vertices in views Колер вяршынь ў выглядах - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Калі птушка, FreeCAD будзе ўжываць адзін колер для ўсіх тэкстаў і радкоў. -Калі не птушка, FreeCAD паспрабуе ўжываць больш светлыя версіі пераважных колераў. - - - Detail Highlight @@ -4776,6 +4851,15 @@ when hatching a face with a PAT pattern Face color (if not transparent) Колер грані (калі не празрысты) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5481,51 +5565,51 @@ Fast, but result is a collection of short straight lines. Надрукаваць усе старонкі - + Different orientation Адрозная арыентацыя - + The printer uses a different orientation than the drawing. Do you want to continue? Друкарка ўжывае арыентацыю, якая выдатная ад арыентацыі чарцяжа. Ці жадаеце в вы працягнуць? - + Different paper size Адрозны памер паперы - + The printer uses a different paper size than the drawing. Do you want to continue? Друкарка ўжывае памер паперы, адрозны ад чарцяжа. Вы жадаеце працягнуць? - + Opening file failed Немагчыма адчыніць файл - + Can not open file %1 for writing. Не атрымалася адчыніць файл %1 для запісу. - + Save DXF file Захаваць файл DXF - + DXF (*.dxf) DXF (*.dxf) - + Selected: Абраны: @@ -8544,14 +8628,14 @@ using the given X/Y Spacing Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box - Дадае пасадку адтуліны ці вала ў вымярэнні<br> - - абярыце адно вымярэнне даўжыні ці дыяметра<br> - - націсніце кнопку інструмента, адчыніцца панэль<br> - - абярыце пасадку вала / адтуліны<br> - - абярыце патрэбнае поле адпаведнасці стандарту ISO 286, пры ўжыванні поля з спісам + Add a hole or shaft fit to a dimension<br> + - select one length dimension or diameter dimension<br> + - click the tool button, a panel opens<br> + - select shaft fit / hole fit<br> + - select the desired ISO 286 fit field using the combo box @@ -8676,7 +8760,7 @@ using the given X/Y Spacing You cannot delete this balloon now because there is an open task dialog. - Цяпер вы не можаце выдаліць пазіцыйную зноску, таму што адчынена дыялогавае акно задачы. + Цяпер вы не можаце выдаліць пазіцыйную зноску, бо адчынена дыялогавае акно задачы. diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts index ad05a1ce8a..056b5d9618 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ca.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf Guardar pàgina com dxf @@ -2086,7 +2086,7 @@ Crea una Vista Activa - + Create CenterLine Crea una línia central @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Afegeix un vèrtex cosmètic + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Insert Prefix + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Create Arc Length Dim + + + TechDraw Hole Circle + TechDraw Hole Circle + Bolt Circle Centerlines Bolt Circle Centerlines + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Circle Centerlines + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + Cosmetic Thread Hole Side Cosmetic Thread Hole Side + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Cosmetic Thread Bolt Side + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Cosmetic Thread Hole Bottom + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Cosmetic Thread Bolt Bottom + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Canvia els atributs de la línia + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Cosmetic Intersection Vertex(es) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Cosmetic Arc + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Cosmetic Circle + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Cosmetic Circle 3 Points + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Cosmetic Line Parallel/Perpendicular + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Lock/Unlock View + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Extend/Shorten Line + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Tots els arxius (*.*) @@ -3301,17 +3386,17 @@ Exporta la Pàgina com a PDF - + Document Name: Document Name: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exporta la Pàgina com a SVG @@ -3400,7 +3485,7 @@ Crea una línia central - + Edit Center Line Edita la línia central @@ -3596,14 +3681,14 @@ - + Selection is empty Selection is empty - + No object selected No object selected @@ -3628,12 +3713,12 @@ No faces in selection. - + TechDraw Thread Hole Side TechDraw Thread Hole Side - + Please select two straight lines Please select two straight lines @@ -3813,7 +3898,7 @@ it has a tile weld that would become broken. You cannot delete this view because it has one or more dependent objects that would become broken. - You cannot delete this view because it has one or more dependent objects that would become broken. + No podeu suprimir aquesta vista perquè conté un o més objectes dependents que es trencaria. @@ -4723,15 +4808,6 @@ when hatching a face with a PAT pattern Color of vertices in views Color dels vèrtexs en les vistes - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Detail Highlight @@ -4772,6 +4848,15 @@ when hatching a face with a PAT pattern Face color (if not transparent) Color de la cara (si no és transparent) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5472,49 +5557,49 @@ Fast, but result is a collection of short straight lines. Print All Pages - + Different orientation Orientació diferent - + The printer uses a different orientation than the drawing. Do you want to continue? La impressora utilitza una orientació diferent que la del dibuix. Voleu continuar? - + Different paper size Mida de paper diferent - + The printer uses a different paper size than the drawing. Do you want to continue? La impressora utilitza una mida de paper diferent que la del dibuix. Voleu continuar? - + Opening file failed No s'ha pogut obrir el fitxer - + Can not open file %1 for writing. No s'ha pogut obrir el fitxer %1 per a escriure-hi. - + Save DXF file Desa el fitxer DXF - + DXF (*.dxf) DXF (*.dxf) - + Selected: Seleccionat: @@ -8539,12 +8624,12 @@ usant l'espaiat X/Y donat Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts index 03f49a1e8b..2827a2ca7c 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf Uložit stránku do dxf @@ -2086,7 +2086,7 @@ Vytvořit aktivní pohled - + Create CenterLine Vytvořit osu @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Přidat pomocný vrchol + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Insert Prefix + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Create Arc Length Dim + + + TechDraw Hole Circle + TechDraw Hole Circle + Bolt Circle Centerlines Bolt Circle Centerlines + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Circle Centerlines + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + Cosmetic Thread Hole Side Cosmetic Thread Hole Side + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Cosmetic Thread Bolt Side + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Cosmetic Thread Hole Bottom + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Cosmetic Thread Bolt Bottom + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Změnit atributy řádku + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Cosmetic Intersection Vertex(es) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Cosmetic Arc + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Cosmetic Circle + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Cosmetic Circle 3 Points + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Cosmetic Line Parallel/Perpendicular + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Lock/Unlock View + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Extend/Shorten Line + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Všechny soubory (*.*) @@ -3301,17 +3386,17 @@ Exportovat stránku do PDF - + Document Name: Document Name: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exportovat stránku do SVG @@ -3400,7 +3485,7 @@ Vytvořit osu - + Edit Center Line Upravit osu @@ -3596,14 +3681,14 @@ - + Selection is empty Selection is empty - + No object selected No object selected @@ -3628,12 +3713,12 @@ No faces in selection. - + TechDraw Thread Hole Side TechDraw Thread Hole Side - + Please select two straight lines Please select two straight lines @@ -4727,15 +4812,6 @@ when hatching a face with a PAT pattern Color of vertices in views Color of vertices in views - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Detail Highlight @@ -4776,6 +4852,15 @@ when hatching a face with a PAT pattern Face color (if not transparent) Barva povrchu (pokud není průhledná) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5478,51 +5563,51 @@ Fast, but result is a collection of short straight lines. Print All Pages - + Different orientation Jiná orientace - + The printer uses a different orientation than the drawing. Do you want to continue? Tiskárna používá jinou orientaci než výkres. Chcete pokračovat? - + Different paper size Jiný formát papíru - + The printer uses a different paper size than the drawing. Do you want to continue? Tiskárna používá jiný formát papíru než výkres. Chcete pokračovat? - + Opening file failed Otevření souboru selhalo - + Can not open file %1 for writing. Soubor %1 nelze otevřít pro zápis. - + Save DXF file Save DXF file - + DXF (*.dxf) DXF (*.dxf) - + Selected: Vybráno: @@ -8548,12 +8633,12 @@ using the given X/Y Spacing Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts index e7598532d7..040f4b3e08 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_de.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf Seite als dxf speichern @@ -2086,7 +2086,7 @@ Aktuelle Ansicht erstellen - + Create CenterLine Mittellinie erstellen @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Hilfspunkt hinzufügen + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Präfixsymbol einfügen + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Bogenmaß erstellen + + + TechDraw Hole Circle + TechDraw Lochkreis + Bolt Circle Centerlines Lochkreismittellinien + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Kreismittellinien + + + TechDraw Thread Hole Side + TechDraw Gewindebohrung in der Seitenansicht + Cosmetic Thread Hole Side Hilfslinien für Innengewinde in Seitenansicht + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Hilfslinien für Außengewinde in Seitenansicht + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Hilfslinien für Innengewinde in Achsansicht + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Hilfslinien für Außengewinde in Achsansicht + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Linienmerkmale ändern + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Hilfsschnittpunkt(e) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Hilfsbogen + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Hilfskreis + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Hilfskreis über 3 Punkte + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Hilfslinie Parallel/Senkrecht + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Ansicht fixieren/lösen + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Linie verlängern/kürzen + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Alle Dateien (*.*) @@ -3301,17 +3386,17 @@ Seite als PDF-Datei exportieren - + Document Name: Dokumentname: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Seite als SVG-Datei exportieren @@ -3400,7 +3485,7 @@ Mittellinie erstellen - + Edit Center Line Mittellinie bearbeiten @@ -3596,14 +3681,14 @@ - + Selection is empty Nichts ausgewählt - + No object selected Kein Objekt ausgewählt @@ -3628,12 +3713,12 @@ Keine Fläche in der Auswahl. - + TechDraw Thread Hole Side TechDraw Gewindebohrung in der Seitenansicht - + Please select two straight lines Bitte zwei gerade Linien auswählen @@ -3811,7 +3896,7 @@ it has a tile weld that would become broken. You cannot delete this view because it has one or more dependent objects that would become broken. - You cannot delete this view because it has one or more dependent objects that would become broken. + Diese Ansicht kann nicht gelöscht werden, da sie ein oder mehrere abhängige Objekte enthält, die beschädigt würden. @@ -4194,12 +4279,12 @@ Jede Einheit ist etwa 0,1 mm breit If checked, system will attempt to automatically correct dimension references when the model changes. - Wenn diese Option aktiviert ist, wird das System versuchen, die Bemassungsreferenzen automatisch zu korrigieren, wenn sich das Modell ändert. + Wenn aktiviert, wird das System versuchen, Maßreferenzen automatisch zu korrigieren, wenn sich das Modell ändert. Auto Correct Dimension Refs - Automatische Korrektur der Bemassungsreferenz + Automatische Korrektur der Maßreferenzen @@ -4248,8 +4333,8 @@ Nur ändern, wenn du weißt, was du machst! Limit of 64x64 pixel SVG tiles used to hatch a single face. For large scalings you might get an error about to many SVG tiles. Then you need to increase the tile limit. - Begrenzung auf 64x64 Pixel-SVG-Kacheln, um eine einzelne Fläche zu schraffieren. -Bei großen Schraffurflächen könnte es zu einem Fehler durch zu viele SVG-Kacheln kommen. + Maximale Anzahl von SVG-Kacheln einer Größe von 64x64 Pixeln zum Schraffieren einer einzelnen Fläche. +Bei großen Maßstäben könnte es zu einem Fehler durch zu viele SVG-Kacheln kommen. Dann muss das Kachellimit erhöht werden. @@ -4282,7 +4367,7 @@ das Schraffieren einer Fläche mit einem PAT-Schraffurmuster Overlap Edges Scrub Passes - Überlappung Schruppdurchgang + Schruppdurchgänge für überlappende Kanten @@ -4725,15 +4810,6 @@ das Schraffieren einer Fläche mit einem PAT-Schraffurmuster Color of vertices in views Farbe der Knotenpunkte in den Ansichten - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Wenn aktiviert, verwendet FreeCAD eine einzige Farbe für alle Texte und Linien. Wenn nicht aktiviert, wird FreeCAD versuchen, hellere Versionen von bevorzugten Farben zu verwenden. - - - Detail Highlight @@ -4774,6 +4850,15 @@ das Schraffieren einer Fläche mit einem PAT-Schraffurmuster Face color (if not transparent) Farbe für Flächen (wenn nicht transparent) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5476,49 +5561,49 @@ Schnell, aber das Ergebnis ist eine Sammlung von kurzen geraden Linien.Alle Seiten drucken - + Different orientation Andere Ausrichtung - + The printer uses a different orientation than the drawing. Do you want to continue? Der Drucker verwendet eine andere Ausrichtung als die Zeichnung. Möchten Sie fortfahren? - + Different paper size Anderes Papierformat - + The printer uses a different paper size than the drawing. Do you want to continue? Der Drucker verwendet eine andere Papiergröße als die Zeichnung. Möchten Sie fortfahren? - + Opening file failed Fehler beim Öffnen der Datei - + Can not open file %1 for writing. Datei %1 kann nicht zum Schreiben geöffnet werden. - + Save DXF file DXF-Datei speichern - + DXF (*.dxf) DXF (*.dxf) - + Selected: Ausgewählt: @@ -8538,14 +8623,14 @@ mit dem vorgegebenen X/Y-Abstand Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box - Fügt einem Maß eine Bohrungs- oder Wellenpassung hinzu <br> - - Ein Längen- oder Durchmessermaß auswählen<br> - - Ein Klick auf die Werkzeugschaltfläche öffnet ein Dialogfenster<br> - - Wellen- oder Bohrungspassung auswählen<br> - - Die gewünschte Passungskombination nach ISO 286 in der Combo-Box auswählen + Add a hole or shaft fit to a dimension<br> + - select one length dimension or diameter dimension<br> + - click the tool button, a panel opens<br> + - select shaft fit / hole fit<br> + - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts index d2ca77bed9..fea0c5a7b4 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_el.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf Save page to dxf @@ -2086,7 +2086,7 @@ Create ActiveView - + Create CenterLine Create CenterLine @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Add Cosmetic Vertex + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Εισαγωγή προθέματος + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Create Arc Length Dim + + + TechDraw Hole Circle + TechDraw Hole Circle + Bolt Circle Centerlines Bolt Circle Centerlines + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Circle Centerlines + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + Cosmetic Thread Hole Side Cosmetic Thread Hole Side + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Cosmetic Thread Bolt Side + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Cosmetic Thread Hole Bottom + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Cosmetic Thread Bolt Bottom + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Change Line Attributes + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Cosmetic Intersection Vertex(es) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Cosmetic Arc + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Cosmetic Circle + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Cosmetic Circle 3 Points + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Cosmetic Line Parallel/Perpendicular + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Lock/Unlock View + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Extend/Shorten Line + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Όλα τα αρχεία (*.*) @@ -3301,17 +3386,17 @@ Εξαγωγή Σελίδας ως PDF - + Document Name: Document Name: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Εξαγωγή Σελίδας ως SVG @@ -3400,7 +3485,7 @@ Create Center Line - + Edit Center Line Edit Center Line @@ -3596,14 +3681,14 @@ - + Selection is empty Selection is empty - + No object selected No object selected @@ -3628,12 +3713,12 @@ No faces in selection. - + TechDraw Thread Hole Side TechDraw Thread Hole Side - + Please select two straight lines Please select two straight lines @@ -4731,15 +4816,6 @@ when hatching a face with a PAT pattern Color of vertices in views Color of vertices in views - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Detail Highlight @@ -4780,6 +4856,15 @@ when hatching a face with a PAT pattern Face color (if not transparent) Face color (if not transparent) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5482,51 +5567,51 @@ Fast, but result is a collection of short straight lines. Print All Pages - + Different orientation Διαφορετικός προσανατολισμός - + The printer uses a different orientation than the drawing. Do you want to continue? Ο εκτυπωτής χρησιμοποιεί διαφορετικό προσανατολισμό από το σχέδιο. Θέλετε να συνεχίσετε; - + Different paper size Διαφορετικό μέγεθος χαρτιού - + The printer uses a different paper size than the drawing. Do you want to continue? Ο εκτυπωτής χρησιμοποιεί διαφορετικό μέγεθος χαρτιού από το σχέδιο. Θέλετε να συνεχίσετε; - + Opening file failed Αποτυχία ανοίγματος αρχείου - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save DXF file Αποθήκευση αρχείου DXF - + DXF (*.dxf) DXF (*.dxf) - + Selected: Επιλεγμένα: @@ -8552,12 +8637,12 @@ using the given X/Y Spacing Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts index 6f91271697..6e81f73437 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-AR.ts @@ -134,7 +134,7 @@ Insert Arch Workbench Object - Insertar objeto del entorno de trabajo Arq + Insertar objeto del banco de trabajo Arq @@ -341,7 +341,7 @@ Insert Draft Workbench Object - Insertar objeto del entorno de trabajo Draft + Insertar objeto del banco de trabajo Draft @@ -2015,7 +2015,7 @@ - + Save page to dxf Guardar página como dxf @@ -2086,7 +2086,7 @@ Crear vista activa - + Create CenterLine Crear línea central @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Agregar vértice adicional + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Insertar prefijo + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Crear cot long arc + + + TechDraw Hole Circle + Círculo de Agujero TechDraw + Bolt Circle Centerlines Líneas centrales del círculo de perno + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Centros de línea de círculo + + + TechDraw Thread Hole Side + Dibuja lateral del agujero de la rosca + Cosmetic Thread Hole Side Lado de agujero roscado cosmético + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Lado de perno roscado cosmético + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Planta de agujero roscado cosmética + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Planta de perno roscado cosmética + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Cambiar atributos de línea + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Vértice(s) de intersección cosmético(s) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Arco cosmético + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Círculo cosmético + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Círculo cosmético 3 puntos + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Línea cosmética paralela/perpendicular + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Bloquear/desbloquear Vista + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Extender/Acortar Línea + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Todos los archivos (*.*) @@ -3301,17 +3386,17 @@ Exportar Página Como PDF - + Document Name: Nombre del documento: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exportar página como SVG @@ -3400,7 +3485,7 @@ Crear Línea Centro - + Edit Center Line Editar Línea Centro @@ -3596,14 +3681,14 @@ - + Selection is empty La selección está vacía - + No object selected Ningún objeto seleccionado @@ -3628,12 +3713,12 @@ No hay caras en la selección. - + TechDraw Thread Hole Side Dibuja lateral del agujero de la rosca - + Please select two straight lines Por favor, seleccione dos líneas rectas @@ -3815,7 +3900,7 @@ tiene un cuadro de soldadura que se rompería. You cannot delete this view because it has one or more dependent objects that would become broken. - You cannot delete this view because it has one or more dependent objects that would become broken. + No puedes eliminar esta vista porque tiene uno o más objetos dependientes que se romperían. @@ -4730,15 +4815,6 @@ al rayar una cara con un patrón PAT Color of vertices in views Color de los vértices en vistas - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Si está marcado, FreeCAD utilizará un solo color para todos los textos y líneas. Si no está marcada FreeCAD intentará usar versiones más ligeras de los colores preferidos. - - - Detail Highlight @@ -4779,6 +4855,15 @@ al rayar una cara con un patrón PAT Face color (if not transparent) Color de la cara (si no es transparente) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5480,51 +5565,51 @@ Rápido, pero el resultado es una colección de líneas rectas cortas.Imprimir todas las páginas - + Different orientation Orientación diferente de la hoja - + The printer uses a different orientation than the drawing. Do you want to continue? La impresora utiliza una orientación de papel distinta a la del dibujo. ¿Desea continuar? - + Different paper size Tamaño de papel diferente - + The printer uses a different paper size than the drawing. Do you want to continue? La impresora usa un tamaño de papel distinto al del dibujo. ¿Desea continuar? - + Opening file failed No se pudo abrir el archivo - + Can not open file %1 for writing. No se puede abrir el archivo %1 para escritura. - + Save DXF file Guardar archivo DXF - + DXF (*.dxf) DXF (*.dxf) - + Selected: Seleccionado: @@ -8550,14 +8635,14 @@ usando el espacio X/Y dado Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box - Añade un ajuste de agujero o eje a una cota<br> - - selecciona una cota de longitud o diámetro<br> - - haz clic en el botón de herramienta, un panel abre<br> - - seleccione ajuste de eje / ajuste de agujero<br> - - seleccione el campo de ajuste ISO 286 deseado usando la caja de combo + Add a hole or shaft fit to a dimension<br> + - select one length dimension or diameter dimension<br> + - click the tool button, a panel opens<br> + - select shaft fit / hole fit<br> + - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts index fe4d15a291..8c1b558c12 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_es-ES.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf Guardar página como dxf @@ -2086,7 +2086,7 @@ Crear Vista Activa - + Create CenterLine Crear Línea Central @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Añadir vértice cosmético + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Insertar prefijo + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Crear cot long arc + + + TechDraw Hole Circle + Círculo de Agujero TechDraw + Bolt Circle Centerlines Líneas centrales del círculo de perno + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Líneas centrales del círculo + + + TechDraw Thread Hole Side + Dibuja lateral del agujero de la rosca + Cosmetic Thread Hole Side Lado de agujero roscado cosmético + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Lado de perno roscado cosmético + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Planta de agujero roscado cosmética + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Planta de perno roscado cosmética + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Cambiar atributos de línea + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Vértice(s) de intersección cosmético(s) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Arco cosmético + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Círculo cosmético + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Círculo cosmético 3 puntos + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Línea cosmética paralela/perpendicular + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Bloquear/Desbloquear vista + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Extender / Acortar línea + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Todos los archivos (*.*) @@ -3301,17 +3386,17 @@ Exportar página como PDF - + Document Name: Nombre del documento: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exportar página como SVG @@ -3400,7 +3485,7 @@ Crear Línea Central - + Edit Center Line Editar Línea Central @@ -3596,14 +3681,14 @@ - + Selection is empty No ha seleccionado nada - + No object selected Ningún objeto seleccionado @@ -3628,12 +3713,12 @@ No hay caras en la selección. - + TechDraw Thread Hole Side Dibuja lateral del agujero de la rosca - + Please select two straight lines Por favor, seleccione dos líneas rectas @@ -3814,7 +3899,7 @@ it has a tile weld that would become broken. You cannot delete this view because it has one or more dependent objects that would become broken. - You cannot delete this view because it has one or more dependent objects that would become broken. + No puede eliminar esta vista porque tiene uno o más objetos dependientes que se romperían. @@ -4730,15 +4815,6 @@ al rayar una cara con un patrón PAT Color of vertices in views Color de los vértices en vistas - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Si está marcado, FreeCAD utilizará un solo color para todo el texto y las líneas. Si está desmarcada FreeCAD intentará usar versiones más claras de los colores preferidos. - - - Detail Highlight @@ -4779,6 +4855,15 @@ al rayar una cara con un patrón PAT Face color (if not transparent) Color de la cara (si no es transparente) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5480,51 +5565,51 @@ Rápido, pero los resultados son una colección de líneas rectas cortas.Imprimir todas las páginas - + Different orientation Orientación diferente de la hoja - + The printer uses a different orientation than the drawing. Do you want to continue? La impresora utiliza una orientación de papel distinta a la del dibujo. ¿Desea continuar? - + Different paper size Tamaño de papel diferente - + The printer uses a different paper size than the drawing. Do you want to continue? La impresora usa un tamaño de papel distinto al del dibujo. ¿Desea continuar? - + Opening file failed No se pudo abrir el archivo - + Can not open file %1 for writing. No se puede abrir el archivo %1 para la escritura. - + Save DXF file Guardar archivo Dxf - + DXF (*.dxf) DXF (*.dxf) - + Selected: Seleccionado: @@ -8550,14 +8635,14 @@ usando el Espaciado X/Y dado Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box - Añade un agujero o ajuste a una dimensión<br> - - selecciona una dimensión de longitud o diámetro<br> - - haz clic en el botón de herramienta, abre un panel<br> - - seleccione ajuste de eje / ajuste de agujero<br> - - seleccione el campo de ajuste ISO 286 deseado usando la caja de combo + Add a hole or shaft fit to a dimension<br> + - select one length dimension or diameter dimension<br> + - click the tool button, a panel opens<br> + - select shaft fit / hole fit<br> + - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts index 075d3cbd06..e8c05dacc3 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_eu.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf Gorde orria DXF fitxategi batean @@ -2086,7 +2086,7 @@ Sortu bista aktiboa - + Create CenterLine Sortu erdiko lerroa @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Gehitu erpin kosmetikoa + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Txertatu aurrizkia + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Txertatu arku-luzeraren kota + + + TechDraw Hole Circle + TechDraw zulo-zirkulua + Bolt Circle Centerlines Buloiaren zirkuluaren erdiko lerroak + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Zirkuluaren erdiko lerroak + + + TechDraw Thread Hole Side + TechDraw hari-zuloaren aldea + Cosmetic Thread Hole Side Hari kosmetikoaren zulo-alboa + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Haridun buloi kosmetikoaren alboa + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Hari kosmetikoaren zulo-behealdea + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Hari kosmetikoaren buloi-behealdea + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Aldatu lerro-atributuak + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Ebakidura-erpin kosmetikoa(k) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Arku kosmetikoa + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Zirkulu kosmetikoa + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points 3 puntuko zirkulu kosmetikoa + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Lerro paralelo/perpendikular kosmetikoa + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Blokeatu/desblokeatu bista + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Luzatu/laburtu lerroa + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Fitxategi guztiak (*.*) @@ -3301,17 +3386,17 @@ Esportatu orrialdea PDF gisa - + Document Name: Dokumentu-izena: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Esportatu orrialdea SVG gisa @@ -3400,7 +3485,7 @@ Sortu erdiko lerroa - + Edit Center Line Editatu erdiko lerroa @@ -3596,14 +3681,14 @@ - + Selection is empty Hautapena hutsik dago - + No object selected Ez da objekturik hautatu @@ -3628,12 +3713,12 @@ Ez dago aurpegirik hautapenean. - + TechDraw Thread Hole Side TechDraw hari-zuloaren aldea - + Please select two straight lines Hautatu bi lerro zuzen @@ -3815,7 +3900,7 @@ hautsi daitekeen lauza-soldadura bat duelako. You cannot delete this view because it has one or more dependent objects that would become broken. - You cannot delete this view because it has one or more dependent objects that would become broken. + Ezin da bista hau ezabatu, hautsita geratuko liratekeen objektu bat edo gehiago dituelako. @@ -4731,15 +4816,6 @@ erabiliko den itzal-lerro kopuru maximoa Color of vertices in views Bistetako erpinen kolorea - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Hau aktibatuta badago, FreeCADek kolore bakarra erabiliko du testu eta lerro guztietarako. Ez badago aktibatuta, hobetsitako koloreen bertsio argiagoak erabiltzen saiatuko da FreeCAD. - - - Detail Highlight @@ -4780,6 +4856,15 @@ erabiliko den itzal-lerro kopuru maximoa Face color (if not transparent) Aurpegi-kolorea (gardena ez bada) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5483,51 +5568,51 @@ Azkarra, baina lerro zuzen laburren bilduma bat ematen du. Inprimatu orrialde guztiak - + Different orientation Orientazio desberdina - + The printer uses a different orientation than the drawing. Do you want to continue? Inprimagailuak eta marrazkiak orientazio desberdina dute. Jarraitu nahi duzu? - + Different paper size Paper-tamaina desberdina - + The printer uses a different paper size than the drawing. Do you want to continue? Inprimagailuak eta marrazkiak paper-tamaina desberdina dute. Jarraitu nahi duzu? - + Opening file failed Fitxategia irekitzeak huts egin du - + Can not open file %1 for writing. Ezin da %1 fitxategia ireki hura idazteko. - + Save DXF file Gorde DXF fitxategia - + DXF (*.dxf) DXF (*.dxf) - + Selected: Hautatua: @@ -8553,14 +8638,14 @@ emandako X/Y espazioa erabilita Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box - Gehitu doikuntza emea edo arra kota bati<br> - - hautatu luzera- edo diametro-kota bat<br> - - egin klik tresnaren botoian, panel bat irekiko da<br> - - hautatu doikuntza arra edo emea<br> - - hautatu, konbinazio-koadroan, erabiliko den ISO 286 doikuntza-eremua + Add a hole or shaft fit to a dimension<br> + - select one length dimension or diameter dimension<br> + - click the tool button, a panel opens<br> + - select shaft fit / hole fit<br> + - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts index a952411df6..da7b20c0e9 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fi.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf Tallenna sivu dxf-muotoon @@ -2086,7 +2086,7 @@ Luo Aktiivinen Näkymä - + Create CenterLine Luo Keskilinja @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Lisää kosmeettinen apupiste + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Lisää etuliite + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Create Arc Length Dim + + + TechDraw Hole Circle + TechDraw Hole Circle + Bolt Circle Centerlines Bolt Circle Centerlines + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Ympyrän Keskiviivat + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + Cosmetic Thread Hole Side Apugeometria reijän kierre + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Apugeometria ruuvin kierre + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Kosmeettinen kierrereijän pohja + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Kosmeettinen ruuvin pääty + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Muuta viivan attribuutteja + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Kosmeettinen leiukkauksen särmä(t) ja piste(et) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Apugeometria kaari + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Apugeometria ympyrä + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Apugeometria ympyrä (3 pistettä) + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Apugeometria viiva Yhdensuuntainen / Kohtisuora + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Lukitse/vapauta näkymä + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Extend/Shorten Line + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Kaikki tiedostot (*.*) @@ -3301,17 +3386,17 @@ Vie sivu PDF-tiedostoon - + Document Name: Document Name: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Vie sivu SVG-tiedostoon @@ -3400,7 +3485,7 @@ Luo Keskiviiva - + Edit Center Line Muokkaa keskilinjaa @@ -3596,14 +3681,14 @@ - + Selection is empty Valinta on tyhjä - + No object selected Yhtäkään objektia ei ole valittu @@ -3628,12 +3713,12 @@ No faces in selection. - + TechDraw Thread Hole Side TechDraw Thread Hole Side - + Please select two straight lines Valitse kaksi suoraa viivaa @@ -4725,15 +4810,6 @@ kun Aluetta viivoitetaan PAT-kuvionnilla Color of vertices in views Pisteiden väri näkymissä - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Jos valittu, FreeCAD käyttää yhtä väriä kaikille teksteille ja viivoille. Jos ei valittuna, FreeCAD yrittää käyttää vaaleampia versioita suositelluista väreistä. - - - Detail Highlight @@ -4774,6 +4850,15 @@ kun Aluetta viivoitetaan PAT-kuvionnilla Face color (if not transparent) Alueen väri (jos ei läpinäkyvä) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5474,51 +5559,51 @@ Nopea, mutta tulos on kokoelma lyhyitä suoria viivoja. Tulosta kaikki sivut - + Different orientation Erilainen sivun suunta - + The printer uses a different orientation than the drawing. Do you want to continue? Tulostin käyttää eri paperisuuntaa kuin piirros. Haluatko jatkaa? - + Different paper size Erilainen paperikoko - + The printer uses a different paper size than the drawing. Do you want to continue? Tulostin käyttää eri paperikokoa kuin piirros. Haluatko jatkaa? - + Opening file failed Tiedoston avaaminen epäonnistui - + Can not open file %1 for writing. Tiedostoon ”%1” ei voida tallentaa. - + Save DXF file Tallenna DXF-tiedosto - + DXF (*.dxf) DXF (*.dxf) - + Selected: Valittu: @@ -8542,14 +8627,14 @@ käyttäen annettuja X/Y-välimatkoja Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box - Lisää reikä- tai akseli sovite, joka sopii mittoihin<br> - - valitse yksi pituus tai halkaisija<br> - - napsauta työkalupainiketta, paneeli avautuu<br> - - valitse akseli-/ reikä sovite<br> - - valitse haluamasi ISO 286 -sovitetoleranssi kombolaatikon avulla + Add a hole or shaft fit to a dimension<br> + - select one length dimension or diameter dimension<br> + - click the tool button, a panel opens<br> + - select shaft fit / hole fit<br> + - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts index 907d8e5bb6..32cfa4945b 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_fr.ts @@ -2168,7 +2168,7 @@ - + Save page to dxf Enregistrer la page en dxf @@ -2239,7 +2239,7 @@ Créer une vue active - + Create CenterLine Créer une trait d'axe @@ -2314,11 +2314,21 @@ Add Cosmetic Vertex Ajouter un sommet cosmétique + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Insérez un préfixe + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2404,76 +2414,151 @@ Create Arc Length Dim Longueur d'arc + + + TechDraw Hole Circle + Axes de centrage des trous/vis + Bolt Circle Centerlines Axes de centrage des trous/vis + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Axes de centrage + + + TechDraw Thread Hole Side + Dessin latérale du trou taraudé + Cosmetic Thread Hole Side Corps de taraudage + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Corps de filetage + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Taraudage + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Filetage + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Modifier les attributs de lignes + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Intersection de lignes + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Arc + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Cercle + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Cercle par 3 points + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Ligne parallèle/perpendiculaire + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Verrouiller/déverrouiller les vues + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Agrandir/raccourcir la ligne + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3445,7 +3530,7 @@ - + All Files (*.*) Tous les fichiers (*.*) @@ -3455,17 +3540,17 @@ Exporter la page au format PDF - + Document Name: Nom du document: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exporter la page au format SVG @@ -3554,7 +3639,7 @@ Créer une ligne centrale - + Edit Center Line Modifier la ligne centrale @@ -3750,14 +3835,14 @@ - + Selection is empty La sélection est vide - + No object selected Aucun objet sélectionné @@ -3782,12 +3867,12 @@ Aucune face dans la sélection. - + TechDraw Thread Hole Side Dessin latérale du trou taraudé - + Please select two straight lines Veuillez sélectionner deux lignes droites @@ -3969,7 +4054,7 @@ it has a tile weld that would become broken. You cannot delete this view because it has one or more dependent objects that would become broken. - You cannot delete this view because it has one or more dependent objects that would become broken. + Vous ne pouvez pas supprimer cette vue, car elle contient un ou plusieurs objets dépendants qui deviendraient orphelins. @@ -4320,7 +4405,7 @@ can be a performance penalty in complex models. Show Loose 2D Geom - Inclure des objets 2D + Montrer les objets 2D isolés @@ -4879,14 +4964,6 @@ Si cette case n'est pas cochée, FreeCAD utilisera l'algorithme d'origine de rec Color of vertices in views Couleur des sommets dans les vues - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Si cette option est cochée, FreeCAD utilisera une seule couleur pour tout le texte et toutes les lignes. -Si la case n'est pas cochée, FreeCAD essaiera d'utiliser des versions plus claires des couleurs préférées. - Detail Highlight @@ -4905,7 +4982,7 @@ Si la case n'est pas cochée, FreeCAD essaiera d'utiliser des versions plus clai Grid Color - Couleur de la grille + Couleur des grilles @@ -4927,6 +5004,15 @@ Si la case n'est pas cochée, FreeCAD essaiera d'utiliser des versions plus clai Face color (if not transparent) Couleur de la face (si non transparente) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -4994,7 +5080,7 @@ Si la case n'est pas cochée, FreeCAD essaiera d'utiliser des versions plus clai Line Spacing - ISO - Interligne - ISO + Espacement des lignes - ISO @@ -5631,49 +5717,49 @@ Fast, but result is a collection of short straight lines. Imprimer toutes les pages - + Different orientation Orientation différente - + The printer uses a different orientation than the drawing. Do you want to continue? L'imprimante utilise une autre orientation que le dessin. Voulez-vous continuer ? - + Different paper size Format de papier différent - + The printer uses a different paper size than the drawing. Do you want to continue? L'imprimante utilise un format de papier différent que le dessin. Voulez-vous continuer ? - + Opening file failed L'ouverture du fichier a échoué - + Can not open file %1 for writing. Impossible d’ouvrir le fichier %1 en écriture. - + Save DXF file Enregistrer le fichier Dxf - + DXF (*.dxf) Dxf (*.dxf) - + Selected: Sélectionné: @@ -8701,14 +8787,14 @@ Peut être lent pour les modèles complexes. Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box - Ajouter une tolérance de trou ou d'arbre à une cote -- Sélectionner une cote de longueur ou une cote de diamètre -- Cliquer sur le bouton de l'outil, un panneau s'ouvre -- Sélectionner la tolérance d'arbre/tolérance de trou -- Sélectionner la tolérance ISO 286 désirée à l'aide de la boîte combinée + Add a hole or shaft fit to a dimension<br> + - select one length dimension or diameter dimension<br> + - click the tool button, a panel opens<br> + - select shaft fit / hole fit<br> + - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts index 49b25cb07d..870cbc1670 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_gl.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf Save page to dxf @@ -2086,7 +2086,7 @@ Create ActiveView - + Create CenterLine Create CenterLine @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Add Cosmetic Vertex + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Insert Prefix + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Create Arc Length Dim + + + TechDraw Hole Circle + TechDraw Hole Circle + Bolt Circle Centerlines Bolt Circle Centerlines + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Circle Centerlines + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + Cosmetic Thread Hole Side Cosmetic Thread Hole Side + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Cosmetic Thread Bolt Side + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Cosmetic Thread Hole Bottom + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Cosmetic Thread Bolt Bottom + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Change Line Attributes + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Cosmetic Intersection Vertex(es) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Cosmetic Arc + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Cosmetic Circle + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Cosmetic Circle 3 Points + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Cosmetic Line Parallel/Perpendicular + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Lock/Unlock View + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Extend/Shorten Line + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Tódolos ficheiros (*.*) @@ -3301,17 +3386,17 @@ Exporta Páxina Como PDF - + Document Name: Document Name: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exporta páxina como SVG @@ -3400,7 +3485,7 @@ Create Center Line - + Edit Center Line Edit Center Line @@ -3596,14 +3681,14 @@ - + Selection is empty Selection is empty - + No object selected No object selected @@ -3628,12 +3713,12 @@ No faces in selection. - + TechDraw Thread Hole Side TechDraw Thread Hole Side - + Please select two straight lines Please select two straight lines @@ -4731,15 +4816,6 @@ when hatching a face with a PAT pattern Color of vertices in views Color of vertices in views - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Detail Highlight @@ -4780,6 +4856,15 @@ when hatching a face with a PAT pattern Face color (if not transparent) Face color (if not transparent) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5482,51 +5567,51 @@ Fast, but result is a collection of short straight lines. Print All Pages - + Different orientation Orientación diferente - + The printer uses a different orientation than the drawing. Do you want to continue? A impresora usa unha orientación de papel diferente da do debuxo. Quere seguir? - + Different paper size Tamaño de papel diferente - + The printer uses a different paper size than the drawing. Do you want to continue? A impresora usa un tamaño de papel diferente do do debuxo. Quere seguir? - + Opening file failed Falla ó abrir o ficheiro - + Can not open file %1 for writing. Non se pode abrir o ficheiro %1 para escribir. - + Save DXF file Save DXF file - + DXF (*.dxf) DXF (*.dxf) - + Selected: Escolmado: @@ -8552,12 +8637,12 @@ using the given X/Y Spacing Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts index 5a52087f5c..7b213e1ad9 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hr.ts @@ -2031,7 +2031,7 @@ - + Save page to dxf Spremi stranicu u dxf formatu @@ -2102,7 +2102,7 @@ Stvori aktivni Pogled - + Create CenterLine Stvori središnju Liniju @@ -2177,11 +2177,21 @@ Add Cosmetic Vertex Dodaj pomoćnu tjemenu točku + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Umetni prefiks + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2271,76 +2281,151 @@ Create Arc Length Dim Stvori dimenziju dužine luka + + + TechDraw Hole Circle + TechDraw Hole Circle + Bolt Circle Centerlines Središnje linije kruga vijka + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Središnje linije kruga + + + TechDraw Thread Hole Side + Tehničko Crtanje Navoj pogled sa strane + Cosmetic Thread Hole Side Pogled sa strane unutrašnjeg navoja vijka + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Pogled sa strane unutrašnjeg navoja vijka + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Pogled nadno Dekoracijskog navoja vijka + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Cosmetic Thread Bolt Bottom + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Promijeni atribute linije + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Cosmetic Intersection Vertex(es) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Dekorativni luk + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Dekorativni krug + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Dekorativni krug iz 3 točke + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Cosmetic Line Parallel/Perpendicular + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Zaključaj/otključaj pogled + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Produži/Skrati liniju + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3313,7 +3398,7 @@ - + All Files (*.*) Sve datoteke (*.*) @@ -3323,17 +3408,17 @@ Izvoz Stranice u PDF - + Document Name: Naziv dokumenta: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Izvoz Stranice u SVG @@ -3422,7 +3507,7 @@ Stvori Srednju liniju - + Edit Center Line Uređivanje simetrale @@ -3618,14 +3703,14 @@ - + Selection is empty Odabir je prazan - + No object selected Nema odabranog objekta @@ -3650,12 +3735,12 @@ No faces in selection. - + TechDraw Thread Hole Side Tehničko Crtanje Navoj pogled sa strane - + Please select two straight lines Molimo odaberite dvije ravne linije @@ -4780,15 +4865,6 @@ kad se šrafira lice s PAT uzorkom Color of vertices in views Boja vrhova u pogledima - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Detail Highlight @@ -4829,6 +4905,15 @@ kad se šrafira lice s PAT uzorkom Face color (if not transparent) Boja lica (ako nije prozirno) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5565,49 +5650,49 @@ Brzo, ali rezultat je zbirka kratkih ravnih linija. Ispis svih stranica - + Different orientation Drugačija orijentacija - + The printer uses a different orientation than the drawing. Do you want to continue? Pisač koristi drugu orijentaciju ispisa nego što je u crtežu. Želite li nastaviti? - + Different paper size Drugačija veličina papira - + The printer uses a different paper size than the drawing. Do you want to continue? Pisač koristi drugu veličinu papra nego što je u crtežu. Želite li nastaviti? - + Opening file failed Otvaranje dokumenta nije uspjelo - + Can not open file %1 for writing. Ne mogu otvoriti dokument %1 za ispis. - + Save DXF file Spremi DXF Datoteku - + DXF (*.dxf) DXF (*.dxf) - + Selected: Odabrane: @@ -8648,12 +8733,12 @@ koristeći zadani X/Y razmak Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts index a7e8866c7d..7ad18f988f 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_hu.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf Oldal mentése dxf-be @@ -2086,7 +2086,7 @@ Aktív nézet létrehozása - + Create CenterLine Középvonal létrehozása @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Segéd csúcspont hozzáadása + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Előtag beszúrás + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Ívhosszúság méret létrehozása + + + TechDraw Hole Circle + Műszaki Rajz, Furat kör + Bolt Circle Centerlines Csavarkör középvonalak + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Kör középvonalak + + + TechDraw Thread Hole Side + A menetes furat rajzoló oldala + Cosmetic Thread Hole Side Belső menet segédvonalak oldalnézetben + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Segédvonal csavarmenet oldalnézete + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Segédvonal belső menethez tengelynézetben + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Külső menet segédvonal tengelynézetben + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Vonal jellemzőinek megváltoztatása + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Segéd metszésponti csúcs(ok) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Segéd ív + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Segéd kör + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Segédkört 3 ponttal + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Párhuzamos/függőleges segédvonal + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Nézet rögzítése/feloldása + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Vonal hosszabbítás/rövidítés + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Összes fájl (*.*) @@ -3301,17 +3386,17 @@ Oldal export PDF formában - + Document Name: Dokumentum neve: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Oldal export SVG formában @@ -3400,7 +3485,7 @@ Középvonal létrehozása - + Edit Center Line Középvonal szerkesztése @@ -3596,14 +3681,14 @@ - + Selection is empty A kijelölési terület nem tartalmaz objektumokat - + No object selected Nincs kijelölt tárgy @@ -3628,12 +3713,12 @@ Nincsenek felületek a kijelölésben. - + TechDraw Thread Hole Side A menetes furat rajzoló oldala - + Please select two straight lines Válasszon két egyenest @@ -3815,7 +3900,7 @@ egy részhegesztése megtörne. You cannot delete this view because it has one or more dependent objects that would become broken. - You cannot delete this view because it has one or more dependent objects that would become broken. + Nem törölheti ezt a nézetet, mert van egy több tárgy függősége van, amely megszakadna. @@ -4730,15 +4815,6 @@ amikor egy PAT-mintával töltünk ki felületet Color of vertices in views Csúcspontok színe a nézetekben - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Ha bejelölt, a FreeCAD egyetlen színt használ minden szöveghez és vonalhoz. Ha nincs bejelölve, a FreeCAD megpróbálja a preferált színek világosabb változatait használni. - - - Detail Highlight @@ -4779,6 +4855,15 @@ amikor egy PAT-mintával töltünk ki felületet Face color (if not transparent) Felület szín (ha nem átlátszó) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5477,50 +5562,50 @@ Gyors, de az eredmény rövid egyenesek gyűjteménye. Összes oldal nyomtatása - + Different orientation Eltérő tájolású - + The printer uses a different orientation than the drawing. Do you want to continue? A nyomtató a rajztól eltérő tájolást használ. Szeretné fojtatni? - + Different paper size Eltérő papírméret - + The printer uses a different paper size than the drawing. Do you want to continue? A nyomtató a rajztól eltérő méretű papír méretet használ. Szeretné folytatni? - + Opening file failed Fájl megnyitása sikertelen - + Can not open file %1 for writing. %1 fájlt nem nyitható meg íráshoz. - + Save DXF file DXF-fájl mentése - + DXF (*.dxf) Dxf (*.dxf) - + Selected: Kiválasztott: @@ -8545,14 +8630,14 @@ a megadott X/Y távolság használatával Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box - Adjon hozzá egy furatot vagy tengelyt egy mérethez<br> - - válasszon ki egy hosszméretet vagy átmérőméretet<br> - - kattintson az eszköz gombra, megnyílik egy panel<br> - - válassza ki a tengelyillesztés / furatillesztés<br> - - válassza ki a kívánt ISO 286 illesztési mezőt a kombinált mező segítségével + Add a hole or shaft fit to a dimension<br> + - select one length dimension or diameter dimension<br> + - click the tool button, a panel opens<br> + - select shaft fit / hole fit<br> + - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts index 5b43b1a7bc..fa3972e5a7 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_it.ts @@ -2017,7 +2017,7 @@ - + Save page to dxf Salva pagina su dxf @@ -2088,7 +2088,7 @@ Crea vista attiva - + Create CenterLine Crea linea di mezzeria @@ -2163,11 +2163,21 @@ Add Cosmetic Vertex Vertice cosmetico + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Inserisci Prefisso + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2253,76 +2263,151 @@ Create Arc Length Dim Crea Quota Lunghezza Arco + + + TechDraw Hole Circle + TechDraw Cerchio foro + Bolt Circle Centerlines Linee d'asse cerchio Vite + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Linee d'asse Cerchio + + + TechDraw Thread Hole Side + TechDraw foro filettato in vista laterale + Cosmetic Thread Hole Side Filettatura Cosmetica Laterale Foro + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Filettatura Cosmetica Laterale Vite + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Filettatura Cosmetica Inferiore Foro + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Filettatura Cosmetica Inferiore Vite + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Cambia Attributi Linea + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Vertici Di Intersezione Cosmetici + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Arco Cosmetico + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Cerchio Cosmetico + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Cerchio Cosmetico 3 Punti + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Linea Cosmetica Parallela/Perpendicolare + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Blocca/Sblocca Vista + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Estende/accorcia Linea + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3293,7 +3378,7 @@ - + All Files (*.*) Tutti i File (*.*) @@ -3303,17 +3388,17 @@ Esporta pagina in PDF - + Document Name: Nome del documento: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Esporta pagina in SVG @@ -3402,7 +3487,7 @@ Crea linea centrale - + Edit Center Line Modifica linea centrale @@ -3598,14 +3683,14 @@ - + Selection is empty La selezione è vuota - + No object selected Nessun oggetto selezionato @@ -3630,12 +3715,12 @@ Nessuna faccia nella selezione. - + TechDraw Thread Hole Side TechDraw foro filettato in vista laterale - + Please select two straight lines Per favore seleziona due linee dritte @@ -3817,7 +3902,7 @@ it has a tile weld that would become broken. You cannot delete this view because it has one or more dependent objects that would become broken. - You cannot delete this view because it has one or more dependent objects that would become broken. + Non puoi eliminare questa vista perché ha uno o più oggetti dipendenti che sarebbero rotti. @@ -4733,15 +4818,6 @@ quando si tratteggia una faccia con un modello PAT Color of vertices in views Colore dei vertici nelle viste - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Se selezionato, FreeCAD userà un solo colore per tutti i testi e le linee. Se non selezionato, FreeCAD tenterà di utilizzare versioni più chiare dei colori preferiti. - - - Detail Highlight @@ -4782,6 +4858,15 @@ quando si tratteggia una faccia con un modello PAT Face color (if not transparent) Colore delle facce (se non trasparenti) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5483,49 +5568,49 @@ Fast, but result is a collection of short straight lines. Stampa tutte le pagine - + Different orientation Orientamento diverso - + The printer uses a different orientation than the drawing. Do you want to continue? La stampante utilizza un orientamento diverso rispetto al disegno. Si desidera continuare? - + Different paper size Formato carta diverso - + The printer uses a different paper size than the drawing. Do you want to continue? La stampante utilizza un formato di carta diverso rispetto al disegno. Si desidera continuare? - + Opening file failed Apertura del file non riuscita - + Can not open file %1 for writing. Impossibile aprire il file %1 per la scrittura. - + Save DXF file Salva file DXF - + DXF (*.dxf) DXF (*.dxf) - + Selected: Selezionato: @@ -8550,12 +8635,12 @@ usando la spaziatura X/Y specificata Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts index 6bcc6f85d2..c8bb2c33e4 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ja.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf ページをDXFに保存 @@ -2086,7 +2086,7 @@ アクティブビューを作成 - + Create CenterLine 中心線を作成 @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex 表示用の頂点を追加 + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix プレフィックスを挿入 + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim 円弧の長さ寸法を作成 + + + TechDraw Hole Circle + TechDraw 穴円 + Bolt Circle Centerlines ボルト円の中心線 + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines 円の中心線 + + + TechDraw Thread Hole Side + TechDraw ねじ穴側面 + Cosmetic Thread Hole Side 表示用のねじ穴側面 + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side 表示用のねじボルト側面 + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom 表示用のねじ穴底面 + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom 表示用のねじボルト底面 + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes 線属性の変更 + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) 表示用の交差頂点 + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc 表示用の円弧 + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle 表示用の円 + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points 表示用の3点円 + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular 表示用の線 平行/垂直 + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View ビューのロック/アンロック + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line 線を延長/短縮 + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) すべてのファイル (*.*) @@ -3301,17 +3386,17 @@ ページをPDFとしてエクスポート - + Document Name: Document Name: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG ページをSVGとしてエクスポート @@ -3400,7 +3485,7 @@ 中心線を作成 - + Edit Center Line 中心線を編集 @@ -3596,14 +3681,14 @@ - + Selection is empty 選択されていません - + No object selected オブジェクトが選択されていません @@ -3628,12 +3713,12 @@ No faces in selection. - + TechDraw Thread Hole Side TechDraw ねじ穴側面 - + Please select two straight lines 2本の直線を選択してください。 @@ -3810,7 +3895,7 @@ it has a tile weld that would become broken. You cannot delete this view because it has one or more dependent objects that would become broken. - You cannot delete this view because it has one or more dependent objects that would become broken. + 壊れてしまう依存オブジェクトがあるため、このビューを削除できません。 @@ -4724,15 +4809,6 @@ when hatching a face with a PAT pattern Color of vertices in views ビュー内の頂点の色 - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Detail Highlight @@ -4773,6 +4849,15 @@ when hatching a face with a PAT pattern Face color (if not transparent) 面の色（透明でない場合） + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5473,50 +5558,50 @@ Fast, but result is a collection of short straight lines. Print All Pages - + Different orientation 異なる向き - + The printer uses a different orientation than the drawing. Do you want to continue? プリンターでは、図面と異なる印刷方向を使用します。続行しますか？ - + Different paper size 別の用紙サイズ - + The printer uses a different paper size than the drawing. Do you want to continue? プリンターでは、図面とは異なる用紙サイズを使用します。 続行しますか？ - + Opening file failed ファイルを開けませんでした。 - + Can not open file %1 for writing. 書き込み用ファイル %1 を開くことができません。 - + Save DXF file DXF ファイルを保存 - + DXF (*.dxf) DXF (*.dxf) - + Selected: 選択: @@ -8537,12 +8622,12 @@ using the given X/Y Spacing Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts index e52ac59366..c79da248a9 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ka.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf გვერდის DXF-ში შენახვა @@ -2086,7 +2086,7 @@ აქტიური ხედის შექმნა - + Create CenterLine ცენტრალურ ხაზის შექმნა @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex დამხმარე წვეროს დამატება + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix პრეფიქსის ჩასმა + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim რკალის სიგრძის ზომის შექმნა + + + TechDraw Hole Circle + TechDraw-ის ნახვრეტის წრეწირი + Bolt Circle Centerlines ხრახნის წრის ცენტრის ხაზები + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines წრეწირის ცენრის ხაზები + + + TechDraw Thread Hole Side + TechDraw-ის კუთხვილის ხვრელის გვერდი + Cosmetic Thread Hole Side კოსმეტიკური კუთხვილის ხრახნის ნახვრეტის კედელი + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side ჰოსმეტიკური კუთხვილის ხრახნის გვერდი + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom კოსმეტიკური კუთხვილის ხრახნის ნახვრეტის ძირი + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom ჰოსმეტიკური კუთხვილის ხრახნის ძირი + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes ხაზის ატრიბუტების შეცვლა + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) კოსმეტიკური კვეთის წვეროები + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc კოსმეტიკური რკალი + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle კოსმეტიკური წრეწირი + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points კოსმეტიკური წრე 3 წერტილი + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular კოსმეტიკური ხაზი პარალელურია თუ მართობული + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View ხედის დაბლოკვა/განბლოკვა + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line ხაზის გაგრძელება/შემოკლება + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) ყველა ფაილი (*.*) @@ -3301,17 +3386,17 @@ გვერდის PDF ფაილად გატანა - + Document Name: დოკუმენტის სახელი: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG გვერდის SVG ფაილად გატანა @@ -3400,7 +3485,7 @@ ცენტრალური ხაზის შექმნა - + Edit Center Line ცენტრალური ხაზის ჩასწორება @@ -3596,14 +3681,14 @@ - + Selection is empty მონიშნული ცარიელია - + No object selected ობიექტი მონიშნული არაა @@ -3628,12 +3713,12 @@ მონიშნულში ზედაპირები არაა. - + TechDraw Thread Hole Side TechDraw-ის კუთხვილის ხვრელის გვერდი - + Please select two straight lines გთხოვთ, არჩიეთ ორი სწორი ხაზი @@ -3814,7 +3899,7 @@ it has a tile weld that would become broken. You cannot delete this view because it has one or more dependent objects that would become broken. - You cannot delete this view because it has one or more dependent objects that would become broken. + თქვენ არ შეგიძლიათ ამ ხედის წაშლა იმიტომ, რომ მას გააჩნია ერთი ან მეტი დამოკიდებული ობიექტი, რომელიც გაფუჭდებოდა. @@ -4730,15 +4815,6 @@ when hatching a face with a PAT pattern Color of vertices in views ხედზე წვეროების ფერი - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - თუ ჩართულია, FreeCAD-ი ყველა ტექსტისა და ხაზისთვის ერთ ფერს გამოიყენებს. თუ გამორთულია, FreeCAD-ი არჩეული ფერების ღია ვერსიების გამოყენებას ეცდება. - - - Detail Highlight @@ -4779,6 +4855,15 @@ when hatching a face with a PAT pattern Face color (if not transparent) ზედაპირის ფერი (თუ გამჭვირვალე არაა) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5478,51 +5563,51 @@ Fast, but result is a collection of short straight lines. ყველა გვერდის დაბეჭდვა - + Different orientation განსხვავებული ორიენტაცია - + The printer uses a different orientation than the drawing. Do you want to continue? პრინტერი ნახაზისგან განსხვავებულ ორიენტაციას იყენებს. გნებავთ გაგრძელება? - + Different paper size ფურცლის განსხვავებული ზომა - + The printer uses a different paper size than the drawing. Do you want to continue? პრინტერი იყენებს ქაღალდის განსხვავებულ ზომას, ვიდრე ნახაზი. Გინდა გააგრძელო? - + Opening file failed ფაილის გახსნის შეცდომა - + Can not open file %1 for writing. ჩასაწერად ფაილის „%1“ გახსნა შეუძლებელია. - + Save DXF file DXF ფაილის შენახვა - + DXF (*.dxf) DXF (*.dxf) - + Selected: მონიშნული: @@ -8548,12 +8633,12 @@ using the given X/Y Spacing Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts index 750e5e352e..1dbb3c3318 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ko.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf Save page to dxf @@ -2086,7 +2086,7 @@ Create ActiveView - + Create CenterLine Create CenterLine @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex 꾸밈 꼭짓점 추가 + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Insert Prefix + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Create Arc Length Dim + + + TechDraw Hole Circle + TechDraw Hole Circle + Bolt Circle Centerlines Bolt Circle Centerlines + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Circle Centerlines + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + Cosmetic Thread Hole Side Cosmetic Thread Hole Side + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Cosmetic Thread Bolt Side + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Cosmetic Thread Hole Bottom + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Cosmetic Thread Bolt Bottom + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Change Line Attributes + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Cosmetic Intersection Vertex(es) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Cosmetic Arc + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Cosmetic Circle + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Cosmetic Circle 3 Points + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Cosmetic Line Parallel/Perpendicular + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Lock/Unlock View + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Extend/Shorten Line + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) All Files (*.*) @@ -3301,17 +3386,17 @@ Export Page As PDF - + Document Name: Document Name: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Export page as SVG @@ -3400,7 +3485,7 @@ Create Center Line - + Edit Center Line Edit Center Line @@ -3596,14 +3681,14 @@ - + Selection is empty Selection is empty - + No object selected No object selected @@ -3628,12 +3713,12 @@ No faces in selection. - + TechDraw Thread Hole Side TechDraw Thread Hole Side - + Please select two straight lines Please select two straight lines @@ -4731,15 +4816,6 @@ when hatching a face with a PAT pattern Color of vertices in views Color of vertices in views - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Detail Highlight @@ -4780,6 +4856,15 @@ when hatching a face with a PAT pattern Face color (if not transparent) Face color (if not transparent) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5482,50 +5567,50 @@ Fast, but result is a collection of short straight lines. Print All Pages - + Different orientation 다른 방향 - + The printer uses a different orientation than the drawing. Do you want to continue? The printer uses a different orientation than the drawing. Do you want to continue? - + Different paper size 다른 용지 크기 - + The printer uses a different paper size than the drawing. Do you want to continue? 프린터가 사용중인 종이 크기가 현재 드로잉과는 다릅니다. 계속 진행하시겠습니까? - + Opening file failed 파일 열기 실패 - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save DXF file DXF 파일 저장 - + DXF (*.dxf) DXF (*.dxf) - + Selected: 선택: @@ -8551,12 +8636,12 @@ using the given X/Y Spacing Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts index cb380103ee..06c574aeb1 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_nl.ts @@ -1615,7 +1615,7 @@ Print All Pages - Print All Pages + Alle pagina's afdrukken @@ -2015,7 +2015,7 @@ - + Save page to dxf Pagina in dxf opslaan @@ -2086,7 +2086,7 @@ Maak Actiefweergave - + Create CenterLine Maak een middenlijn @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Voeg een cosmetisch eindpunt toe + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Insert Prefix + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Create Arc Length Dim + + + TechDraw Hole Circle + TechDraw Hole Circle + Bolt Circle Centerlines Bolt Circle Centerlines + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Circle Centerlines + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + Cosmetic Thread Hole Side Cosmetic Thread Hole Side + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Cosmetic Thread Bolt Side + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Cosmetic Thread Hole Bottom + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Cosmetic Thread Bolt Bottom + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Wijzig Lijn Attributen + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Cosmetic Intersection Vertex(es) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Cosmetische boog + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Cosmetische cirkel + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Cosmetic Circle 3 Points + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Cosmetic Line Parallel/Perpendicular + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Vergrendel/Ontgrendel Weergave + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Extend/Shorten Line + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3225,7 +3310,7 @@ No %1 in Selection - No %1 in Selection + Geen %1 in selectie @@ -3277,7 +3362,7 @@ No Drawing Pages available. - No Drawing Pages available. + Geen tekenpagina's beschikbaar. @@ -3291,7 +3376,7 @@ - + All Files (*.*) Alle bestanden (*.*) @@ -3301,17 +3386,17 @@ Exporteren als PDF - + Document Name: Documentnaam: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exporteren als SVG @@ -3400,7 +3485,7 @@ Maak een middenlijn aan - + Edit Center Line Bewerk middenlijn @@ -3596,14 +3681,14 @@ - + Selection is empty Selectie is leeg - + No object selected Geen object geselecteerd @@ -3628,12 +3713,12 @@ No faces in selection. - + TechDraw Thread Hole Side TechDraw Thread Hole Side - + Please select two straight lines Selecteer twee rechte lijnen @@ -3815,7 +3900,7 @@ een Lastegel heeft die kapot gaat. You cannot delete this view because it has one or more dependent objects that would become broken. - You cannot delete this view because it has one or more dependent objects that would become broken. + U kunt deze weergave niet verwijderen omdat er een of meer objecten zijn met afhankelijkheden die hierdoor verbroken zouden worden. @@ -4709,7 +4794,7 @@ bij de arcering van een vlak met een PAT-patroon Page Color - Page Color + Paginakleur @@ -4731,15 +4816,6 @@ bij de arcering van een vlak met een PAT-patroon Color of vertices in views Kleur van de eindpunten in weergaven - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Detail Highlight @@ -4780,10 +4856,19 @@ bij de arcering van een vlak met een PAT-patroon Face color (if not transparent) Vlakkleur (indien niet transparant) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome - Monochrome + Monochroom @@ -5479,53 +5564,53 @@ Snel, maar resulteert in een verzameling van korte rechte lijnen. Print All Pages - Print All Pages + Alle pagina's afdrukken - + Different orientation Verschillende oriëntatie - + The printer uses a different orientation than the drawing. Do you want to continue? De printer gebruikt een andere richting dan de tekening. Wil je doorgaan? - + Different paper size Ander papierformaat - + The printer uses a different paper size than the drawing. Do you want to continue? De printer gebruikt een ander papierfromaat dan de tekening. Wilt u toch doorgaan? - + Opening file failed Bestand openen mislukt - + Can not open file %1 for writing. Kan bestand '%1' niet openen om te schrijven. - + Save DXF file Bewaar Dxf-bestand - + DXF (*.dxf) Dxf (*.dxf) - + Selected: Geselecteerd: @@ -5865,7 +5950,7 @@ Do you want to continue? Object Selection - Object Selection + Objectselectie @@ -5987,7 +6072,7 @@ Do you want to continue? Check to update display after every property change. - Inschakelen om het scherm te verversen na iedere wijzigen van een eigenschap. + Inschakelen om het scherm te verversen na iedere wijziging van een eigenschap. @@ -6773,7 +6858,7 @@ be used instead of the dimension value Use selection - Use selection + Selectie gebruiken @@ -7734,7 +7819,7 @@ met behulp van de gegeven X/Y afstand Check to update display after every property change. - Inschakelen om het scherm te verversen na iedere wijzigen van een eigenschap. + Inschakelen om het scherm te verversen na iedere wijziging van een eigenschap. @@ -8349,18 +8434,18 @@ met behulp van de gegeven X/Y afstand Select View - Select View + Selecteer weergave Select From Page. - Select From Page. + Selecteer van pagina. Select Page - Select Page + Pagina selecteren @@ -8373,7 +8458,7 @@ met behulp van de gegeven X/Y afstand Share View - Share View + Weergave delen @@ -8398,18 +8483,18 @@ met behulp van de gegeven X/Y afstand Select View - Select View + Selecteer weergave Select From Page. - Select From Page. + Selecteer van pagina. Select Page - Select Page + Pagina selecteren @@ -8551,12 +8636,12 @@ met behulp van de gegeven X/Y afstand Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts index 49f7c0afd8..8903ffdd9c 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts @@ -2021,7 +2021,7 @@ - + Save page to dxf Zapisz stronę do pliku dxf @@ -2092,7 +2092,7 @@ Utwórz aktywny widok - + Create CenterLine Utwórz linię środkową @@ -2167,11 +2167,21 @@ Add Cosmetic Vertex Dodaj wierzchołek kosmetyczny + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Wstaw przedrostek + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2257,76 +2267,151 @@ Create Arc Length Dim Utwórz wymiar długości łuku + + + TechDraw Hole Circle + TechDraw Okrąg z otworami + Bolt Circle Centerlines Osie otworów w okręgu + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Osie okręgu + + + TechDraw Thread Hole Side + Otwór gwintowany w Rysunku Technicznym, widok z boku + Cosmetic Thread Hole Side Widok z boku kosmetycznego gwintu otworu + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Widok z boku kosmetycznego gwintu śruby + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Widok od dołu kosmetycznego gwintu otworu + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Widok od dołu kosmetycznego gwintu śruby + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Zmień atrybuty linii + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Kosmetyczne wierzchołki na przecięciach + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Łuk pomocniczy + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Okrąg pomocniczy + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Kosmetyczny okrąg oparty na 3 punktach + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Linia pomocnicza równolegle / prostopadle + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Zablokuj / Odblokuj widok + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Wydłuż/Skróć linię + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3297,7 +3382,7 @@ - + All Files (*.*) Wszystkie pliki (*.*) @@ -3307,17 +3392,17 @@ Wyeksportuj stronę do formatu PDF - + Document Name: Nazwa dokumentu: - + SVG (*.svg) SVG(*.svg) - + Export page as SVG Eksportuj stronę do formatu SVG @@ -3406,7 +3491,7 @@ Utwórz linię środkową - + Edit Center Line Edytuj linię środkową @@ -3602,14 +3687,14 @@ - + Selection is empty Obszar zaznaczenia nie zawiera obiektów - + No object selected Nie wybrano obiektu @@ -3634,12 +3719,12 @@ W wyborze brak ścian. - + TechDraw Thread Hole Side Otwór gwintowany w Rysunku Technicznym, widok z boku - + Please select two straight lines Proszę wybrać dwie linie proste @@ -3821,7 +3906,7 @@ ma on punkową/czołową spoinę, która zostałaby uszkodzona. You cannot delete this view because it has one or more dependent objects that would become broken. - You cannot delete this view because it has one or more dependent objects that would become broken. + Nie można usunąć tego widoku, ponieważ ma on co najmniej jeden obiekt zależny, który zostałby uszkodzony. @@ -4711,7 +4796,7 @@ przy kreskowanie ściany jest ze wzorem PAT Light on dark - Jasny na ciemnym + Jasne na ciemnym @@ -4738,15 +4823,6 @@ przy kreskowanie ściany jest ze wzorem PAT Color of vertices in views Kolor wierzchołków w widoku - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Jeśli opcja jest zaznaczona, FreeCAD użyje jednego koloru dla wszystkich tekstów i linii. Jeśli opcja nie jest zaznaczona, FreeCAD spróbuje użyć jaśniejszych wersji preferowanych kolorów. - - - Detail Highlight @@ -4787,6 +4863,15 @@ przy kreskowanie ściany jest ze wzorem PAT Face color (if not transparent) Kolor ściany (jeżeli nie jest przezroczysta) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5490,50 +5575,50 @@ Szybkie, ale wynikiem jest kolekcja krótkich linii prostych. Drukuj wszystkie strony - + Different orientation Odmienna orientacja - + The printer uses a different orientation than the drawing. Do you want to continue? Drukarka używa inną orientacje strony niż rysunek. Czy chcesz kontynuować? - + Different paper size Odmienny rozmiar papieru - + The printer uses a different paper size than the drawing. Do you want to continue? Drukarka używa innego rozmiaru papieru niż rysunek. Czy chcesz kontynuować? - + Opening file failed Otwarcie pliku nie powiodło się - + Can not open file %1 for writing. Nie można otworzyć pliku %1 do zapisu. - + Save DXF file Zapisz plik DXF - + DXF (*.dxf) DXF (*.dxf) - + Selected: Zaznaczone: @@ -8559,14 +8644,14 @@ przy użyciu podanego odstępu X/Y Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box - Dodaj pasowanie otworu lub wału do wymiaru<br> - - wybierz jeden wymiar długości lub wymiar średnicy<br> - - kliknij przycisk narzędzia, otworzy się panel<br> - - wybierz pasowanie wału / pasowanie otworu<br> - - wybierz żądane pole pasowania ISO 286 za pomocą pola wyboru + Add a hole or shaft fit to a dimension<br> + - select one length dimension or diameter dimension<br> + - click the tool button, a panel opens<br> + - select shaft fit / hole fit<br> + - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts index 317f7f71e3..3a3bb9879f 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-BR.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf Salvar página para dxf @@ -2086,7 +2086,7 @@ Criar vista ativa - + Create CenterLine Criar linha central @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Adicionar Vértice Cosmético + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Inserir Prefixo + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Create Arc Length Dim + + + TechDraw Hole Circle + TechDraw Hole Circle + Bolt Circle Centerlines Bolt Circle Centerlines + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Circle Centerlines + + + TechDraw Thread Hole Side + Lado do furo da rosca no desenho técnico + Cosmetic Thread Hole Side Cosmetic Thread Hole Side + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Cosmetic Thread Bolt Side + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Cosmetic Thread Hole Bottom + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Cosmetic Thread Bolt Bottom + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Alterar Atributos da Linha + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Cosmetic Intersection Vertex(es) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Cosmetic Arc + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Cosmetic Circle + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Cosmetic Circle 3 Points + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Cosmetic Line Parallel/Perpendicular + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Travar/Destravar Vista + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Extend/Shorten Line + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Todos os arquivos (*.*) @@ -3301,17 +3386,17 @@ Exportar página para PDF - + Document Name: Nome do documento: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exportar página para SVG @@ -3400,7 +3485,7 @@ Criar linha central - + Edit Center Line Editar linha central @@ -3596,14 +3681,14 @@ - + Selection is empty A seleção está vazia - + No object selected Nenhum objeto selecionado @@ -3628,12 +3713,12 @@ No faces in selection. - + TechDraw Thread Hole Side Lado do furo da rosca no desenho técnico - + Please select two straight lines Por favor selecione duas linhas retas @@ -3815,7 +3900,7 @@ ele tem uma solda de terra que ficaria quebrada. You cannot delete this view because it has one or more dependent objects that would become broken. - You cannot delete this view because it has one or more dependent objects that would become broken. + Você não pode deletar essa vista porque possui um ou mais objetos dependentes que ficariam quebrados. @@ -4731,15 +4816,6 @@ ao hachurar uma face com um padrão PAT Color of vertices in views Cor dos vértices em vistas - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Detail Highlight @@ -4780,6 +4856,15 @@ ao hachurar uma face com um padrão PAT Face color (if not transparent) Cor das faces (se não forem transparentes) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5482,50 +5567,50 @@ Rápido, mas produz uma coleção de linhas retas simples. Imprimir todas as páginas - + Different orientation Orientação diferente - + The printer uses a different orientation than the drawing. Do you want to continue? A impressora utiliza uma orientação diferente do que o desenho. Deseja continuar? - + Different paper size Tamanho de papel diferente - + The printer uses a different paper size than the drawing. Do you want to continue? A impressora usa um tamanho de papel diferente do que o desenho. Deseja continuar? - + Opening file failed Falha ao abrir arquivo - + Can not open file %1 for writing. Não é possível abrir o arquivo '%1' para a gravação. - + Save DXF file Salvar arquivo DXF - + DXF (*.dxf) DXF (*.dxf) - + Selected: Selecionado: @@ -8551,12 +8636,12 @@ usando o espaçamento X/Y fornecido Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts index 8b037a58dd..f81238daef 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf Salvar folha para dxf @@ -2086,7 +2086,7 @@ Create ActiveView - + Create CenterLine Criar LinhadeEixo @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Adicionar Vértice Cosmético + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Insert Prefix + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Create Arc Length Dim + + + TechDraw Hole Circle + TechDraw Hole Circle + Bolt Circle Centerlines Bolt Circle Centerlines + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Circle Centerlines + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + Cosmetic Thread Hole Side Cosmetic Thread Hole Side + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Cosmetic Thread Bolt Side + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Cosmetic Thread Hole Bottom + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Cosmetic Thread Bolt Bottom + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Change Line Attributes + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Cosmetic Intersection Vertex(es) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Cosmetic Arc + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Cosmetic Circle + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Cosmetic Circle 3 Points + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Cosmetic Line Parallel/Perpendicular + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Lock/Unlock View + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Extend/Shorten Line + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Todos os Ficheiros (*. *) @@ -3301,17 +3386,17 @@ Exportar folha como PDF - + Document Name: Document Name: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exportar folha como SVG @@ -3400,7 +3485,7 @@ Criar linha de eixo - + Edit Center Line Editar linha de eixo @@ -3596,14 +3681,14 @@ - + Selection is empty Selection is empty - + No object selected No object selected @@ -3628,12 +3713,12 @@ No faces in selection. - + TechDraw Thread Hole Side TechDraw Thread Hole Side - + Please select two straight lines Please select two straight lines @@ -3815,7 +3900,7 @@ it has a tile weld that would become broken. You cannot delete this view because it has one or more dependent objects that would become broken. - You cannot delete this view because it has one or more dependent objects that would become broken. + Não pode excluir esta visão porque ela tem um ou mais objetos dependentes que se tornariam quebrados. @@ -4731,15 +4816,6 @@ when hatching a face with a PAT pattern Color of vertices in views Color of vertices in views - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Detail Highlight @@ -4780,6 +4856,15 @@ when hatching a face with a PAT pattern Face color (if not transparent) Cor da face (se não transparente) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5482,49 +5567,49 @@ Fast, but result is a collection of short straight lines. Print All Pages - + Different orientation Orientação diferente - + The printer uses a different orientation than the drawing. Do you want to continue? A impressora utiliza uma orientação diferente da folha de desenho. Deseja continuar? - + Different paper size Tamanho de papel diferente - + The printer uses a different paper size than the drawing. Do you want to continue? A impressora usa um tamanho de papel diferente da folha de desenho. Deseja continuar? - + Opening file failed Falha ao abrir ficheiro - + Can not open file %1 for writing. Não é possível abrir o ficheiro %1 para a escrita. - + Save DXF file Save DXF file - + DXF (*.dxf) DXF (*.dxf) - + Selected: Selecionado: @@ -8550,12 +8635,12 @@ using the given X/Y Spacing Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts index b8d7508566..647b559b18 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ro.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf Save page to dxf @@ -2086,7 +2086,7 @@ Create ActiveView - + Create CenterLine Create CenterLine @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Add Cosmetic Vertex + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Insert Prefix + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Create Arc Length Dim + + + TechDraw Hole Circle + TechDraw Hole Circle + Bolt Circle Centerlines Bolt Circle Centerlines + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Circle Centerlines + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + Cosmetic Thread Hole Side Cosmetic Thread Hole Side + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Cosmetic Thread Bolt Side + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Cosmetic Thread Hole Bottom + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Cosmetic Thread Bolt Bottom + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Change Line Attributes + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Cosmetic Intersection Vertex(es) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Cosmetic Arc + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Cosmetic Circle + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Cosmetic Circle 3 Points + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Cosmetic Line Parallel/Perpendicular + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Lock/Unlock View + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Extend/Shorten Line + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Toate fișierele (*.*) @@ -3301,17 +3386,17 @@ Exportă pagina ca PDF - + Document Name: Document Name: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exportă pagina ca SVG @@ -3400,7 +3485,7 @@ Create Center Line - + Edit Center Line Edit Center Line @@ -3596,14 +3681,14 @@ - + Selection is empty Selection is empty - + No object selected No object selected @@ -3628,12 +3713,12 @@ No faces in selection. - + TechDraw Thread Hole Side TechDraw Thread Hole Side - + Please select two straight lines Please select two straight lines @@ -3815,7 +3900,7 @@ it has a tile weld that would become broken. You cannot delete this view because it has one or more dependent objects that would become broken. - You cannot delete this view because it has one or more dependent objects that would become broken. + Nu puteți șterge această vizualizare deoarece are unul sau mai multe obiecte dependente care vor deveni stricate. @@ -4731,15 +4816,6 @@ when hatching a face with a PAT pattern Color of vertices in views Color of vertices in views - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Detail Highlight @@ -4780,6 +4856,15 @@ when hatching a face with a PAT pattern Face color (if not transparent) Face color (if not transparent) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5482,49 +5567,49 @@ Fast, but result is a collection of short straight lines. Print All Pages - + Different orientation Orientare diferită - + The printer uses a different orientation than the drawing. Do you want to continue? Imprimanta utilizează o orientare diferită decât desenul. Doriţi să continuaţi? - + Different paper size Hârtie de dimensiune diferită - + The printer uses a different paper size than the drawing. Do you want to continue? Imprimanta utilizează o altă dimensiune de hârtie decât desenul. Doriţi să continuaţi? - + Opening file failed Deschiderea fișierului a eșuat - + Can not open file %1 for writing. Imposibil de deschis fișierul %1 la scriere. - + Save DXF file Save DXF file - + DXF (*.dxf) DXF (*.dxf) - + Selected: Selectat: @@ -8550,12 +8635,12 @@ using the given X/Y Spacing Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts index 5ff31c4655..3e939faee9 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_ru.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf Сохранить лист в DXF формате @@ -2086,7 +2086,7 @@ Создать активный вид - + Create CenterLine Создать центральную линию @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Добавить вспомогательную вершину + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Вставить префикс + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Создать размерную длину дуги + + + TechDraw Hole Circle + Чертёж. круг отверстия + Bolt Circle Centerlines Осевые линии окружности болтов + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Осевые линии круга + + + TechDraw Thread Hole Side + Чертёж, Сторона отверстия резьбы + Cosmetic Thread Hole Side Сторона отверстия косметической резьбы + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Косметическая резьба со стороны болта + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Нижняя часть отверстия для косметической резьбы + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Косметическая нижняя часть болта с резьбой + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Изменить свойства линии + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Вершины косметического пересечения вершин + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Косметическая дуга + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Косметический круг + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Косметический круг 3 точки + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Косметическая линия параллельная/перпендикулярная + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Заблокировать/разблокировать вид + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Расширение/Сокращение линии + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Все файлы (*.*) @@ -3301,17 +3386,17 @@ Экспорт листа в PDF - + Document Name: Название документа: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Экспорт листа в SVG @@ -3400,7 +3485,7 @@ Создать центральную линию - + Edit Center Line Изменить центральную линию @@ -3596,14 +3681,14 @@ - + Selection is empty Пустое выделение - + No object selected Объект не выбран @@ -3628,12 +3713,12 @@ Нет граней в выборке. - + TechDraw Thread Hole Side Чертёж, Сторона отверстия резьбы - + Please select two straight lines Пожалуйста, выберите две прямые линии @@ -3814,7 +3899,7 @@ it has a tile weld that would become broken. You cannot delete this view because it has one or more dependent objects that would become broken. - You cannot delete this view because it has one or more dependent objects that would become broken. + Вы не можете удалить это представление, так как оно содержит один или несколько зависимых объектов, которые могут быть испорчены. @@ -4727,15 +4812,6 @@ when hatching a face with a PAT pattern Color of vertices in views Цвет вершин в представлениях - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Если флажок установлен, FreeCAD будет использовать один цвет для всего текста и линий. Если флажок не установлен, FreeCAD попытается использовать более светлые версии предпочтительных цветов. - - - Detail Highlight @@ -4776,6 +4852,15 @@ when hatching a face with a PAT pattern Face color (if not transparent) Цвет грани (если не прозрачный) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5478,51 +5563,51 @@ Fast, but result is a collection of short straight lines. Распечатать все страницы - + Different orientation Отличающаяся ориентация - + The printer uses a different orientation than the drawing. Do you want to continue? Принтер использует отличающуюся от чертежа ориентацию бумаги. Хотите продолжить? - + Different paper size Отличающийся формат листа - + The printer uses a different paper size than the drawing. Do you want to continue? Принтер использует отличающийся от чертежа формат листа. Хотите продолжить? - + Opening file failed Ошибка при открытии файла - + Can not open file %1 for writing. Не удалось открыть файл %1 для записи. - + Save DXF file Сохранить файл в DXF - + DXF (*.dxf) DXF (*.dxf) - + Selected: Выбрано: @@ -8547,14 +8632,14 @@ using the given X/Y Spacing Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box - Добавьте отверстие или посадку вала к размеру<br> - - выберите один размер длины или диаметра<br> - - нажмите кнопку инструмента, откроется панель<br> - - выберите посадку на вал / посадку в отверстие<br> - - выберите нужное поле соответствия ISO 286, используя поле со списком + Add a hole or shaft fit to a dimension<br> + - select one length dimension or diameter dimension<br> + - click the tool button, a panel opens<br> + - select shaft fit / hole fit<br> + - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts index e3aef7671d..d90ef7bc51 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sl.ts @@ -797,7 +797,7 @@ Customize Format Label - Customize Format Label + Prilagodi obliko oznake @@ -1501,7 +1501,7 @@ Image files (*.jpg *.jpeg *.png *.bmp);;All files (*) - Image files (*.jpg *.jpeg *.png *.bmp);;All files (*) + Slikovne datoteke (*.jpg *.jpeg *.png *.bmp);;Vse datoteke (*) @@ -2015,7 +2015,7 @@ - + Save page to dxf Shrani stran kot DXF @@ -2086,7 +2086,7 @@ Ustvari DejavniPogled - + Create CenterLine Ustvari Središčnico @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Dodaj dopolnilno oglišče + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Vstavi predpono + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Ustvari koto ločne dolžine + + + TechDraw Hole Circle + TehRisbe (TechDaw) krog izvrtine + Bolt Circle Centerlines Krepke središčnice kroga + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Središčnice kroga + + + TechDraw Thread Hole Side + Stranski ris navoja luknje v TehRisbe + Cosmetic Thread Hole Side Naris navideznega navoja izvrtine + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Stranski ris navideznega navoja svornika + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Dno navideznega navoja izvrtine + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Spodnji pogled na navidezni navoj svornika + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Spremeni črtine značilke + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Navidezna presečiščna oglišča + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Pomožni lok + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Pomožni krog + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Pomožni krog s 3 točkami + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Vzporedna/pravokotna pomožna črta + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Zakleni/Odkleni pogled + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Podaljšaj/skrajšaj črto + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Vse datoteke (*.*) @@ -3301,17 +3386,17 @@ Izvozi stran v PDF - + Document Name: Ime dokumenta: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Izvozi stran kot SVG @@ -3400,7 +3485,7 @@ Ustvari središčnico - + Edit Center Line Uredi središčnico @@ -3596,14 +3681,14 @@ - + Selection is empty Nič ni izbrano - + No object selected Izbran ni noben predmet @@ -3628,12 +3713,12 @@ Med izbranim ni nobene ploskve. - + TechDraw Thread Hole Side Stranski ris navoja luknje v TehRisbe - + Please select two straight lines Izberite dve ravni črti @@ -3815,7 +3900,7 @@ vsebuje zvarni znaki, ki bi postal okvarjen. You cannot delete this view because it has one or more dependent objects that would become broken. - You cannot delete this view because it has one or more dependent objects that would become broken. + Tega pogleda ne morete izbrisati, ker vsebuje enega ali več odvisnih predmetov, ki bi se tako pokvarili. @@ -4237,7 +4322,7 @@ Spreminjajte le, če veste, kaj počnete! Use New Face Finder Algorithm - Use New Face Finder Algorithm + Uporabi algoritem novega iskalnika ploskev @@ -4731,15 +4816,6 @@ uporabi pri črtkanju ploskve z vzorcem PAT Color of vertices in views Barva oglišč v pogledih - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Če je označeno, bo FreeCAD uporabil enotno barvo za vse napise in črte. Če ni označeno, bo FreeCAD skušal uporabiti svetlejše različice prednostnih barv. - - - Detail Highlight @@ -4780,6 +4856,15 @@ uporabi pri črtkanju ploskve z vzorcem PAT Face color (if not transparent) Barva ploskve (če ni prozorna) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5481,51 +5566,51 @@ Hitro, vendar dobimo skupek kratkih ravnih črtic. Natisni vse strani - + Different orientation Druga usmerjenost - + The printer uses a different orientation than the drawing. Do you want to continue? Tiskalnik uporablja drugo usmerjenost kot risba. Ali želite nadaljevati? - + Different paper size Druga velikost papirja - + The printer uses a different paper size than the drawing. Do you want to continue? Tiskalnik uporablja drugo velikost papirja kot risba. Ali želite nadaljevati? - + Opening file failed Odpiranje datoteke ni uspelo - + Can not open file %1 for writing. Datoteke %1 ni mogoče odpreti za pisanje. - + Save DXF file Shrani datoteko DXF - + DXF (*.dxf) DXF (*.dxf) - + Selected: Izbrano: @@ -8550,14 +8635,14 @@ s pomočjo podanih X/Y odmikov Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box - Dodaj prileganje izvrtine ali gredi meram<br> - - izberite eno dolžinsko mero ali premer<br> - - kliknite gumb orodja in odpre se plošča<br> - - izberite prileganje gredi oz. prileganje izvrtine<br> - - v kombiniranem polju izberite željeno področje prileganja po ISO 286 + Add a hole or shaft fit to a dimension<br> + - select one length dimension or diameter dimension<br> + - click the tool button, a panel opens<br> + - select shaft fit / hole fit<br> + - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.ts index 27a206bd64..bc8d889f2f 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr-CS.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf Sačuvaj crtež kao dxf @@ -2086,7 +2086,7 @@ Napravi aktivni pogled - + Create CenterLine Napravi osnu liniju @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Dodaj pomoćnu tačku + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Upiši prefiks + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Kotiraj dužinu luka + + + TechDraw Hole Circle + TechDraw Hole Circle + Bolt Circle Centerlines Simetrale kružnice šrafa + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Simetrale kružnice + + + TechDraw Thread Hole Side + TechDraw unutrašnji navoj + Cosmetic Thread Hole Side Dodaj unutrašnji navoj + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Dodaj spoljašnji navoj + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Dodaj unutrašnji navoj - aksijalni pogled + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Dodaj spoljašnji navoj - aksijalni pogled + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Promeni svojstva linije + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Pomoćna tačka(e) na preseku + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Pomoćni luk + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Pomoćna kružnica + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Pomoćna kružnica sa 3 tačke + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Pomoćna linija paralelna/normalna + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Zaključaj/Otključaj pogled + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Produži/Skrati liniju + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Sve Datoteke (*.*) @@ -3301,17 +3386,17 @@ Izvezi crtež kao PDF - + Document Name: Ime dokumenta: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Izvezi crtež kao SVG @@ -3400,7 +3485,7 @@ Napravi osnu liniju - + Edit Center Line Uredi osnu liniju @@ -3596,14 +3681,14 @@ - + Selection is empty Nisi ništa izabrao - + No object selected Nije izabran nijedan objekat @@ -3628,12 +3713,12 @@ Nije izabrana stranica. - + TechDraw Thread Hole Side TechDraw unutrašnji navoj - + Please select two straight lines Izaberi dve prave linije @@ -3815,7 +3900,7 @@ it has a tile weld that would become broken. You cannot delete this view because it has one or more dependent objects that would become broken. - You cannot delete this view because it has one or more dependent objects that would become broken. + Ne možeš obrisati ovaj pogled jer ima jedan ili više zavisnih objekata koji će postati neispravni. @@ -4731,15 +4816,6 @@ when hatching a face with a PAT pattern Color of vertices in views Boja temena u pogledima - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Ako je čekirano, FreeCAD će koristiti jednu boju za sav tekst i linije. Ako nije čekirano, FreeCAD će pokušati da koristi svetlije verzije željenih boja. - - - Detail Highlight @@ -4780,6 +4856,15 @@ when hatching a face with a PAT pattern Face color (if not transparent) Boja stranice (ako nije providna) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5477,51 +5562,51 @@ Brzo, ali rezultat je skup kratkih pravih linija. Štampaj sve stranice - + Different orientation Drugačija orijentacija - + The printer uses a different orientation than the drawing. Do you want to continue? Štampač koristi drugačiju orijentaciju od crteža. Da li želiš da nastaviš? - + Different paper size Drugačija veličina papira - + The printer uses a different paper size than the drawing. Do you want to continue? Štampač koristi drugačiju veličinu papira od crteža. Da li želiš da nastaviš? - + Opening file failed Otvaranje datoteke neuspešno - + Can not open file %1 for writing. Ne mogu da otvorim datoteku %1 radi upisa. - + Save DXF file Sačuvaj DXF datoteku - + DXF (*.dxf) DXF (*.dxf) - + Selected: Izabrano: @@ -8546,14 +8631,14 @@ umesto dužine Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box - Dodaj toleranciju na kotu<br> - - izaberi dužinsku kotu ili kotu prečnika<br> - - klikni na ovu alatku i otvoriće se panel<br> - - izaberi sistem naleganje (unutrašnja mera ili spoljašnja mera)<br> - - izaberi odgovarajuće tolerancijsko polje + Add a hole or shaft fit to a dimension<br> + - select one length dimension or diameter dimension<br> + - click the tool button, a panel opens<br> + - select shaft fit / hole fit<br> + - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts index 8e125cbb1b..70ec56cbbe 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sr.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf Сачувај цртеж као dxf @@ -2086,7 +2086,7 @@ Направи активни поглед - + Create CenterLine Направи Осну линију @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Додај помоћну тачку + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Упиши префикс + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Котирај дужину лука + + + TechDraw Hole Circle + TechDraw Hole Circle + Bolt Circle Centerlines Симетрале кружнице шрафа + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Симетрале кружнице + + + TechDraw Thread Hole Side + TechDraw унутрашњи навој + Cosmetic Thread Hole Side Додај унутрашњи навој + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Додај спољашњи навој + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Додај унутрашњи навој - Аксијални поглед + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Додај спољашњи навој - Аксијални поглед + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Промени својства линије + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Помоћна тачка(е) на пресеку + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Помоћни лук + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Помоћна кружница + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Помоћна кружница са 3 тачке + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Помоћна линија паралелна/нормална + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Закључај/Откључај поглед + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Продужи/Скрати линију + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Све Датотеке (*.*) @@ -3301,17 +3386,17 @@ Извези цртеж као PDF - + Document Name: Име документа: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Извези цртеж као SVG @@ -3400,7 +3485,7 @@ Направи Осну линију - + Edit Center Line Уреди Осну линију @@ -3596,14 +3681,14 @@ - + Selection is empty Ниси ништа изабрао - + No object selected Није изабран ниједан објекат @@ -3628,12 +3713,12 @@ Није изабрана страница. - + TechDraw Thread Hole Side TechDraw унутрашњи навој - + Please select two straight lines Изабери две праве линије @@ -3815,7 +3900,7 @@ it has a tile weld that would become broken. You cannot delete this view because it has one or more dependent objects that would become broken. - You cannot delete this view because it has one or more dependent objects that would become broken. + Не можеш обрисати овај поглед јер има један или више зависних објеката који ће постати неисправни. @@ -4731,15 +4816,6 @@ when hatching a face with a PAT pattern Color of vertices in views Боја темена у погледима - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Ако је чекирано, FreeCAD ће користити једну боју за сав текст и линије. Ако није чекирано, FreeCAD ће покушати да користи светлије верзије жељених боја. - - - Detail Highlight @@ -4780,6 +4856,15 @@ when hatching a face with a PAT pattern Face color (if not transparent) Боја странице (ако није провидна) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5477,51 +5562,51 @@ Fast, but result is a collection of short straight lines. Штампај све странице - + Different orientation Другачија оријентација - + The printer uses a different orientation than the drawing. Do you want to continue? Штампач користи другачију оријентацију од цртежа. Да ли желиш да наcтавиш? - + Different paper size Другачија величина папира - + The printer uses a different paper size than the drawing. Do you want to continue? Штампач користи другачију величину папира од цртежа. Да ли желиш да наставиш? - + Opening file failed Отварање датотеке неуcпешно - + Can not open file %1 for writing. Не могу да отворим датотеку %1 ради уписа. - + Save DXF file Сачувај DXF датотеку - + DXF (*.dxf) DXF (*.dxf) - + Selected: Изабрано: @@ -8546,14 +8631,14 @@ using the given X/Y Spacing Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box - Додај толеранцију на коту<br> - - изабери дужинску коту или коту пречника<br> - - кликни на ову алатку и отвориће се панел<br> - - изабери систем налегање (унутрашња мера или спољашња мера)<br> - - изабери одговарајуће толеранцијско поље + Add a hole or shaft fit to a dimension<br> + - select one length dimension or diameter dimension<br> + - click the tool button, a panel opens<br> + - select shaft fit / hole fit<br> + - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts index 9c017fa561..70b9ce836e 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_sv-SE.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf Spara sida på dxf @@ -2086,7 +2086,7 @@ Skapa ActiveView - + Create CenterLine Skapa CenterLine @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Lägg till Kosmetiska Vertex + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Insert Prefix + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Create Arc Length Dim + + + TechDraw Hole Circle + TechDraw Hole Circle + Bolt Circle Centerlines Bolt Circle Centerlines + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Circle Centerlines + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + Cosmetic Thread Hole Side Cosmetic Thread Hole Side + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Cosmetic Thread Bolt Side + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Cosmetic Thread Hole Bottom + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Cosmetic Thread Bolt Bottom + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Change Line Attributes + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Cosmetic Intersection Vertex(es) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Cosmetic Arc + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Cosmetic Circle + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Cosmetic Circle 3 Points + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Cosmetic Line Parallel/Perpendicular + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Lock/Unlock View + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Extend/Shorten Line + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Alla filer (*.*) @@ -3301,17 +3386,17 @@ Exportera sida som PDF - + Document Name: Document Name: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exportera sida som SVG @@ -3400,7 +3485,7 @@ Skapa mittlinje - + Edit Center Line Redigera mittlinje @@ -3596,14 +3681,14 @@ - + Selection is empty Selection is empty - + No object selected No object selected @@ -3628,12 +3713,12 @@ No faces in selection. - + TechDraw Thread Hole Side TechDraw Thread Hole Side - + Please select two straight lines Please select two straight lines @@ -4731,15 +4816,6 @@ när du kläcker ett ansikte med ett PAT-mönster Color of vertices in views Färg på vertices i vyer - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Detail Highlight @@ -4780,6 +4856,15 @@ när du kläcker ett ansikte med ett PAT-mönster Face color (if not transparent) Ansiktsfärg (om inte transparent) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5482,50 +5567,50 @@ Snabbt, men resultatet är en samling korta raka linjer. Print All Pages - + Different orientation Annan orientering - + The printer uses a different orientation than the drawing. Do you want to continue? Skrivaren använder en annan orientering än ritningen. Vill du fortsätta? - + Different paper size Annan pappersstorlek - + The printer uses a different paper size than the drawing. Do you want to continue? Skrivaren använder en annan pappersstorlek än ritningen. Vill du fortsätta? - + Opening file failed Fel vid filöppning - + Can not open file %1 for writing. Kan inte öppna fil %1 i skrivläge. - + Save DXF file Save DXF file - + DXF (*.dxf) DXF (*.dxf) - + Selected: Vald: @@ -8551,12 +8636,12 @@ med hjälp av det givna X/Y-avstånden Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts index 835ae267fa..f48c4aba84 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_tr.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf Sayfayı dxf olarak kaydedin @@ -2086,7 +2086,7 @@ AktifGörüntü Oluşturun - + Create CenterLine MerkezÇizgisi Oluştur @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Yardımcı Nokta Ekle + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Önek Ekle + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Yay Uzunluğu Ölçüsü Oluştur + + + TechDraw Hole Circle + TechDraw Delik Çemberi + Bolt Circle Centerlines Cıvata Çemberi Merkez Çizgileri + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Çember merkez çizgileri + + + TechDraw Thread Hole Side + Teknik Çizim Vida Dişi Diş Oyuğunun Yan Tarafı + Cosmetic Thread Hole Side Yardımcı Diş Deliği Yanı + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Yardımcı Dişli Cıvata Yanı + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Yardımcı Diş Deliği Altı + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Yardımcı Dişli Cıvata Alt + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Çizgi Niteliklerini Değiştir + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Yardımcı Kesişim Noktası(ları) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Yardımcı Yay + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Yardımcı Çember + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points 3 Noktalı Yardımcı Çember + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Yardımcı Paralel/Dik Çizgi + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Görünümü Kilitle/Kilidi Aç + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Çizgiyi Uzat/Kısalt + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Tüm dosyalar (*. *) @@ -3301,17 +3386,17 @@ Sayfayı PDF olarak dışa aktar - + Document Name: Belge Adı: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Sayfayı SVG olarak dışa aktar @@ -3400,7 +3485,7 @@ Merkez Çizgisi Oluştur - + Edit Center Line Merkez Çizgisini Düzenle @@ -3596,14 +3681,14 @@ - + Selection is empty Seçim boş - + No object selected Seçili nesne yok @@ -3628,12 +3713,12 @@ No faces in selection. - + TechDraw Thread Hole Side Teknik Çizim Vida Dişi Diş Oyuğunun Yan Tarafı - + Please select two straight lines Lütfen iki düz çizgi seçin @@ -4727,15 +4812,6 @@ when hatching a face with a PAT pattern Color of vertices in views Görünümlerdeki köşe rengi - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Detail Highlight @@ -4776,6 +4852,15 @@ when hatching a face with a PAT pattern Face color (if not transparent) Yüzey rengi (saydam değil ise) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5478,50 +5563,50 @@ Hızlıdır ama sonucu, kısa düz çizgilerin derlemesidir. Tüm Sayfaları Yazdır - + Different orientation Ekran yönü - + The printer uses a different orientation than the drawing. Do you want to continue? Yazıcı çizim daha farklı bir yönelim kullanır. Devam etmek istiyor musunuz? - + Different paper size Farklı kağıt boyutu - + The printer uses a different paper size than the drawing. Do you want to continue? Yazıcı, çizimden farklı bir kağıt boyutu kullanıyor. Devam etmek istiyor musun? - + Opening file failed Dosya açılamadı - + Can not open file %1 for writing. %1 dosyasını yazmak için açamazsın. - + Save DXF file DXF dosyası olarak kaydet - + DXF (*.dxf) DXF (*.dxf) - + Selected: Seçili: @@ -8547,12 +8632,12 @@ gösterimleri otomatik dağıtır Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts index 5d6ca41813..2a79783698 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_uk.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf Зберегти сторінку в dxf файл @@ -2086,7 +2086,7 @@ Create ActiveView - + Create CenterLine Create CenterLine @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Add Cosmetic Vertex + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Insert Prefix + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Create Arc Length Dim + + + TechDraw Hole Circle + TechDraw Hole Circle + Bolt Circle Centerlines Bolt Circle Centerlines + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Circle Centerlines + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + Cosmetic Thread Hole Side Cosmetic Thread Hole Side + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Cosmetic Thread Bolt Side + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Cosmetic Thread Hole Bottom + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Cosmetic Thread Bolt Bottom + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Change Line Attributes + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Cosmetic Intersection Vertex(es) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Cosmetic Arc + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Cosmetic Circle + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Cosmetic Circle 3 Points + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Cosmetic Line Parallel/Perpendicular + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Lock/Unlock View + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Extend/Shorten Line + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Всі файли (*.*) @@ -3301,17 +3386,17 @@ Експорт в PDF - + Document Name: Document Name: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Експорт в SVG @@ -3400,7 +3485,7 @@ Create Center Line - + Edit Center Line Edit Center Line @@ -3596,14 +3681,14 @@ - + Selection is empty Selection is empty - + No object selected No object selected @@ -3628,12 +3713,12 @@ No faces in selection. - + TechDraw Thread Hole Side TechDraw Thread Hole Side - + Please select two straight lines Please select two straight lines @@ -3815,7 +3900,7 @@ it has a tile weld that would become broken. You cannot delete this view because it has one or more dependent objects that would become broken. - You cannot delete this view because it has one or more dependent objects that would become broken. + Не можна видалити цей вид, оскільки він має один або більше залежних об'єктів, що будуть зламані. @@ -4731,15 +4816,6 @@ when hatching a face with a PAT pattern Color of vertices in views Color of vertices in views - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Detail Highlight @@ -4780,6 +4856,15 @@ when hatching a face with a PAT pattern Face color (if not transparent) Face color (if not transparent) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5482,49 +5567,49 @@ Fast, but result is a collection of short straight lines. Print All Pages - + Different orientation Відмінна орієнтація - + The printer uses a different orientation than the drawing. Do you want to continue? Принтер використовує відмінну від креслення орієнтацію. Бажаєте продовжити? - + Different paper size Відмінний розмір паперу - + The printer uses a different paper size than the drawing. Do you want to continue? Принтер використовує відмінний від креслення розмір паперу. Бажаєте продовжити? - + Opening file failed Відкриття файлу не вдалося - + Can not open file %1 for writing. Can not open file %1 for writing. - + Save DXF file Зберегти файл DXF - + DXF (*.dxf) DXF (*.dxf) - + Selected: Виділено: @@ -8550,12 +8635,12 @@ using the given X/Y Spacing Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts index c895b155fd..f400d80f90 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_val-ES.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf Save page to dxf @@ -2086,7 +2086,7 @@ Create ActiveView - + Create CenterLine Create CenterLine @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Afig un vèrtex cosmètic + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Insert Prefix + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Create Arc Length Dim + + + TechDraw Hole Circle + TechDraw Hole Circle + Bolt Circle Centerlines Bolt Circle Centerlines + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Circle Centerlines + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + Cosmetic Thread Hole Side Cosmetic Thread Hole Side + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Cosmetic Thread Bolt Side + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Cosmetic Thread Hole Bottom + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Cosmetic Thread Bolt Bottom + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes Change Line Attributes + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Cosmetic Intersection Vertex(es) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Cosmetic Arc + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Cosmetic Circle + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Cosmetic Circle 3 Points + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Cosmetic Line Parallel/Perpendicular + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Lock/Unlock View + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Extend/Shorten Line + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) Tots els fitxers (*.*) @@ -3301,17 +3386,17 @@ Exporta una pàgina com a PDF - + Document Name: Document Name: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG Exportar una pàgina com a SVG @@ -3400,7 +3485,7 @@ Crea una línia central - + Edit Center Line Edita la línia central @@ -3596,14 +3681,14 @@ - + Selection is empty Selection is empty - + No object selected No object selected @@ -3628,12 +3713,12 @@ No faces in selection. - + TechDraw Thread Hole Side TechDraw Thread Hole Side - + Please select two straight lines Please select two straight lines @@ -4725,15 +4810,6 @@ when hatching a face with a PAT pattern Color of vertices in views Color dels vèrtexs en les vistes - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Detail Highlight @@ -4774,6 +4850,15 @@ when hatching a face with a PAT pattern Face color (if not transparent) Color de la cara (si no és transparent) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5474,49 +5559,49 @@ Fast, but result is a collection of short straight lines. Print All Pages - + Different orientation Orientació diferent - + The printer uses a different orientation than the drawing. Do you want to continue? La impressora utilitza una orientació diferent de la del dibuix. Voleu continuar? - + Different paper size Mida de paper diferent - + The printer uses a different paper size than the drawing. Do you want to continue? La impressora utilitza una mida de paper diferent de la del dibuix. Voleu continuar? - + Opening file failed No s'ha pogut obrir el fitxer. - + Can not open file %1 for writing. No s'ha pogut obrir el fitxer %1 per a escriure-hi. - + Save DXF file Save DXF file - + DXF (*.dxf) DXF (*.dxf) - + Selected: Seleccionat: @@ -8541,12 +8626,12 @@ using the given X/Y Spacing Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts index c8bea0ec19..fa7895039e 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-CN.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf 保存页面到 dxf @@ -2086,7 +2086,7 @@ 创建活动视图 - + Create CenterLine 创建中心线 @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex 添加饰品顶点 + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix Insert Prefix + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Create Arc Length Dim + + + TechDraw Hole Circle + TechDraw Hole Circle + Bolt Circle Centerlines Bolt Circle Centerlines + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines Circle Centerlines + + + TechDraw Thread Hole Side + TechDraw Thread Hole Side + Cosmetic Thread Hole Side Cosmetic Thread Hole Side + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Cosmetic Thread Bolt Side + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Cosmetic Thread Hole Bottom + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Cosmetic Thread Bolt Bottom + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes 修改线条属性 + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Cosmetic Intersection Vertex(es) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Cosmetic Arc + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Cosmetic Circle + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Cosmetic Circle 3 Points + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Cosmetic Line Parallel/Perpendicular + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View Lock/Unlock View + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line Extend/Shorten Line + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) 所有文件(*.*) @@ -3301,17 +3386,17 @@ 以 PDF 格式导出页面 - + Document Name: Document Name: - + SVG (*.svg) SVG (*.svg) - + Export page as SVG 以 SVG格式导出页面 @@ -3400,7 +3485,7 @@ 创建中心线 - + Edit Center Line 编辑中心线 @@ -3596,14 +3681,14 @@ - + Selection is empty Selection is empty - + No object selected No object selected @@ -3628,12 +3713,12 @@ No faces in selection. - + TechDraw Thread Hole Side TechDraw Thread Hole Side - + Please select two straight lines Please select two straight lines @@ -4730,15 +4815,6 @@ when hatching a face with a PAT pattern Color of vertices in views Color of vertices in views - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Detail Highlight @@ -4779,6 +4855,15 @@ when hatching a face with a PAT pattern Face color (if not transparent) Face color (if not transparent) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5481,49 +5566,49 @@ Fast, but result is a collection of short straight lines. Print All Pages - + Different orientation 不同方向 - + The printer uses a different orientation than the drawing. Do you want to continue? 打印机和图纸使用了不同的定位位置。你想要继续吗？ - + Different paper size 不同的图纸大小 - + The printer uses a different paper size than the drawing. Do you want to continue? 打印机和当前图纸使用了不同大小的图纸，是否继续？ - + Opening file failed 打开文件失败 - + Can not open file %1 for writing. 无法打开文件“%1”进行写入。 - + Save DXF file 保存为 Dxf 文件 - + DXF (*.dxf) DXF (*.dxf) - + Selected: 已选择: @@ -8549,12 +8634,12 @@ using the given X/Y Spacing Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts index 0094dd3e9d..f254580bb7 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_zh-TW.ts @@ -2015,7 +2015,7 @@ - + Save page to dxf 儲存頁面為 DXF 格式 @@ -2086,7 +2086,7 @@ 建立活動視圖 - + Create CenterLine 建立中心線 @@ -2161,11 +2161,21 @@ Add Cosmetic Vertex Add Cosmetic Vertex + + + TechDraw Insert Prefix + TechDraw Insert Prefix + Insert Prefix 插入前置 + + + TechDraw Remove Prefix + TechDraw Remove Prefix + Remove Prefix @@ -2251,76 +2261,151 @@ Create Arc Length Dim Create Arc Length Dim + + + TechDraw Hole Circle + 工程圖孔圓 + Bolt Circle Centerlines Bolt Circle Centerlines + + + TechDraw Circle Centerlines + TechDraw Circle Centerlines + Circle Centerlines 圓中心線 + + + TechDraw Thread Hole Side + 工程圖Thread Hole Side + Cosmetic Thread Hole Side Cosmetic Thread Hole Side + + + TechDraw Thread Bolt Side + TechDraw Thread Bolt Side + Cosmetic Thread Bolt Side Cosmetic Thread Bolt Side + + + TechDraw Thread Hole Bottom + TechDraw Thread Hole Bottom + Cosmetic Thread Hole Bottom Cosmetic Thread Hole Bottom + + + TechDraw Thread Bolt Bottom + TechDraw Thread Bolt Bottom + Cosmetic Thread Bolt Bottom Cosmetic Thread Bolt Bottom + + + TechDraw Change Line Attributes + TechDraw Change Line Attributes + Change Line Attributes 變更線屬性 + + + TechDraw Cosmetic Intersection Vertex(es) + TechDraw Cosmetic Intersection Vertex(es) + Cosmetic Intersection Vertex(es) Cosmetic Intersection Vertex(es) + + + TechDraw Cosmetic Arc + TechDraw Cosmetic Arc + Cosmetic Arc Cosmetic Arc + + + TechDraw Cosmetic Circle + TechDraw Cosmetic Circle + Cosmetic Circle Cosmetic Circle + + + TechDraw Cosmetic Circle 3 Points + TechDraw Cosmetic Circle 3 Points + Cosmetic Circle 3 Points Cosmetic Circle 3 Points + + + TechDraw Cosmetic Line Parallel/Perpendicular + TechDraw Cosmetic Line Parallel/Perpendicular + Cosmetic Line Parallel/Perpendicular Cosmetic Line Parallel/Perpendicular + + + TechDraw Lock/Unlock View + TechDraw Lock/Unlock View + Lock/Unlock View 鎖定/解鎖視圖 + + + TechDraw Extend/Shorten Line + TechDraw Extend/Shorten Line + Extend/Shorten Line 延長/縮短 線 + + + TechDraw calculate selected area + TechDraw calculate selected area + Calculate Face Area @@ -3291,7 +3376,7 @@ - + All Files (*.*) 所有檔 (*.*) @@ -3301,17 +3386,17 @@ 匯出頁面為 PDF 檔 - + Document Name: 文件名稱： - + SVG (*.svg) SVG (*.svg) - + Export page as SVG 匯出頁面為 SVG 檔 @@ -3400,7 +3485,7 @@ 建立中心線 - + Edit Center Line 編輯中心線 @@ -3596,14 +3681,14 @@ - + Selection is empty 選擇為空 - + No object selected 沒有選擇物體 @@ -3628,12 +3713,12 @@ No faces in selection. - + TechDraw Thread Hole Side 工程圖Thread Hole Side - + Please select two straight lines Please select two straight lines @@ -4731,15 +4816,6 @@ when hatching a face with a PAT pattern Color of vertices in views 視圖中點之顏色 - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - If checked FreeCAD will use a single colour for all text and lines. If unchecked FreeCAD will attempt to use lighter versions of preferred colours. - - - Detail Highlight @@ -4780,6 +4856,15 @@ when hatching a face with a PAT pattern Face color (if not transparent) Face color (if not transparent) + + + If checked FreeCAD will use a single color for all text and lines. + + + If checked FreeCAD will use a single color for all text and lines. + + + Monochrome @@ -5482,49 +5567,49 @@ Fast, but result is a collection of short straight lines. 列印全部頁面 - + Different orientation 不同方向 - + The printer uses a different orientation than the drawing. Do you want to continue? 印表機與圖面使用之方向不同，您要繼續嗎？ - + Different paper size 紙張尺寸不同 - + The printer uses a different paper size than the drawing. Do you want to continue? 印表機與圖面之紙張尺寸不同，您要繼續嗎？ - + Opening file failed 開啟檔案失敗 - + Can not open file %1 for writing. 無法開啟要寫入的檔案 %1 。 - + Save DXF file 儲存DXF檔 - + DXF (*.dxf) DXF (*.dxf) - + Selected: 已選取： @@ -8549,12 +8634,12 @@ using the given X/Y Spacing Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box Add a hole or shaft fit to a dimension<br> - select one length dimension or diameter dimension<br> - - click the tool button, a panel openes<br> + - click the tool button, a panel opens<br> - select shaft fit / hole fit<br> - select the desired ISO 286 fit field using the combo box diff --git a/src/Mod/Tux/Resources/translations/Tux_zh-CN.qm b/src/Mod/Tux/Resources/translations/Tux_zh-CN.qm index b0e48eee8d..9034ee126e 100644 Binary files a/src/Mod/Tux/Resources/translations/Tux_zh-CN.qm and b/src/Mod/Tux/Resources/translations/Tux_zh-CN.qm differ diff --git a/src/Mod/Tux/Resources/translations/Tux_zh-CN.ts b/src/Mod/Tux/Resources/translations/Tux_zh-CN.ts index 2334edc910..a3f6d888b1 100644 --- a/src/Mod/Tux/Resources/translations/Tux_zh-CN.ts +++ b/src/Mod/Tux/Resources/translations/Tux_zh-CN.ts @@ -86,7 +86,7 @@ Free Turntable - Free Turntable + 自由转盘