diff --git a/src/Mod/Draft/Resources/translations/Draft.ts b/src/Mod/Draft/Resources/translations/Draft.ts
index 7c72dc066b..7e6857db1a 100644
--- a/src/Mod/Draft/Resources/translations/Draft.ts
+++ b/src/Mod/Draft/Resources/translations/Draft.ts
@@ -992,7 +992,7 @@ Use 'arch' to force US arch notation
-
+ A list of exclusion points. Any edge touching any of those points will not be drawn.
@@ -1009,21 +1009,25 @@ Use 'arch' to force US arch notation
-
- If this is True, this object will be recomputed only if it is
- visible
-
-
-
-
+ If this is True, only solid geometry is handled. This overrides the base object's Only Solids property
-
+ If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property
+
+
+ If this is True, this object will include only visible objects
+
+
+
+
+ This object will be recomputed only if this is True.
+
+ Dialog
diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem.ts b/src/Mod/Fem/Gui/Resources/translations/Fem.ts
index a95ebb0ce3..4f4a6ffe68 100755
--- a/src/Mod/Fem/Gui/Resources/translations/Fem.ts
+++ b/src/Mod/Fem/Gui/Resources/translations/Fem.ts
@@ -74,6 +74,11 @@
Geometry reference selector for a
+
+
+ Geometry reference selector for a
+
+ Add
@@ -89,6 +94,21 @@
Click on "Add" and select geometric elements to add them to the list.
+
+
+ The following geometry elements are allowed to select:
+
+
+
+
+ Click on "Add" and select geometric elements to add them to the list.{}The following geometry elements are allowed to select: {}{}{}
+
+
+
+
+ If no geometry is added to the list, all remaining ones are used.
+
+ Click on "Add" and select geometric elements to add to the list.
@@ -100,13 +120,8 @@
-
- The following geometry elements are allowed to select:
-
-
-
-
- If no geometry is added to the list, all remaining ones are used.
+
+ {}If no geometry is added to the list, all remaining ones are used.
@@ -119,11 +134,6 @@
Solid
-
-
- Geometry reference selector for a
-
- SolidSelector
diff --git a/src/Mod/Part/Gui/Resources/translations/Part.ts b/src/Mod/Part/Gui/Resources/translations/Part.ts
index 6f107465b6..0e5288138c 100644
--- a/src/Mod/Part/Gui/Resources/translations/Part.ts
+++ b/src/Mod/Part/Gui/Resources/translations/Part.ts
@@ -248,16 +248,6 @@ It will create a 'Compound Filter' for each shape.
Part_SplitFeatures
-
-
- Boolean Fragments
-
-
-
-
- Split objects where they intersect
-
- Boolean fragments
@@ -366,6 +356,16 @@ This means the overlapping volumes of the shapes will be removed.
A 'Compound Filter' can be used to extract the remaining pieces.
+
+
+ Boolean Fragments
+
+
+
+
+ Split objects where they intersect
+
+ Continue
diff --git a/src/Mod/Path/Gui/Resources/translations/Path.ts b/src/Mod/Path/Gui/Resources/translations/Path.ts
index f49605cc51..673c8798be 100644
--- a/src/Mod/Path/Gui/Resources/translations/Path.ts
+++ b/src/Mod/Path/Gui/Resources/translations/Path.ts
@@ -8,36 +8,6 @@
Show the temporary path construction objects when module is in DEBUG mode.
-
-
- The direction along which dropcutter lines are created
-
-
-
-
- Should the operation be limited by the stock object or by the bounding box of the base object
-
-
-
-
- Step over percentage of the drop cutter path
-
-
-
-
- Z-axis offset from the surface of the object
-
-
-
-
- The Sample Interval. Small values cause long wait times
-
-
-
-
- Enable optimization which removes unnecessary points from G-Code output
-
- Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot.
@@ -48,36 +18,11 @@
Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much.
-
-
- The completion mode for the operation: single or multi-pass
-
-
-
-
- The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise)
-
- Stop index(angle) for rotational scan
-
-
- Ignore areas that proceed below specified depth.
-
-
-
-
- Depth used to identify waste areas to ignore.
-
-
-
-
- Cut through waste to depth at model edge, releasing the model.
-
- Dropcutter lines are created parallel to this axis.
@@ -243,6 +188,11 @@
The path to be copied
+
+
+ The base geometry of this toolpath
+
+ The tool controller that will be used to calculate the path
@@ -558,11 +508,6 @@
Extra offset to apply to the operation. Direction is operation dependent.
-
-
- The library to use to generate the path
-
- Start pocketing at center or boundary
@@ -704,8 +649,63 @@
-
- The base geometry of this toolpath
+
+ The direction along which dropcutter lines are created
+
+
+
+
+ Should the operation be limited by the stock object or by the bounding box of the base object
+
+
+
+
+ Step over percentage of the drop cutter path
+
+
+
+
+ Z-axis offset from the surface of the object
+
+
+
+
+ The Sample Interval. Small values cause long wait times
+
+
+
+
+ Enable optimization which removes unnecessary points from G-Code output
+
+
+
+
+ The completion mode for the operation: single or multi-pass
+
+
+
+
+ The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise)
+
+
+
+
+ Ignore areas that proceed below specified depth.
+
+
+
+
+ Depth used to identify waste areas to ignore.
+
+
+
+
+ Cut through waste to depth at model edge, releasing the model.
+
+
+
+
+ The library to use to generate the path
@@ -987,13 +987,13 @@
-
- Invalid Cutting Edge Angle %.2f, must be <90° and >=0°
+
+ Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
-
- Invalid Cutting Edge Angle %.2f, must be >0° and <=180°
+
+ Invalid Cutting Edge Angle %.2f, must be <90° and >=0°
@@ -1157,31 +1157,6 @@ Increased to stock top.
Ignoring non-horizontal Face
-
-
- Face appears misaligned after initial rotation.
-
-
-
-
- Consider toggling the 'InverseAngle' property and recomputing.
-
-
-
-
- Multiple faces in Base Geometry.
-
-
-
-
- Depth settings will be applied to all faces.
-
-
-
-
- EnableRotation property is 'Off'.
-
- Unable to create path for face(s).
@@ -1247,6 +1222,31 @@ Increased to stock top.
Utils
+
+
+ Face appears misaligned after initial rotation.
+
+
+
+
+ Consider toggling the 'InverseAngle' property and recomputing.
+
+
+
+
+ Multiple faces in Base Geometry.
+
+
+
+
+ Depth settings will be applied to all faces.
+
+
+
+
+ EnableRotation property is 'Off'.
+
+
@@ -1969,16 +1969,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
PathPocket
-
-
- Pocket Shape
-
-
-
-
- Creates a Path Pocket object from a face or faces
-
- Normal
@@ -2029,6 +2019,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
Final depth set below ZMin of face(s) selected.
+
+
+ Pocket Shape
+
+
+
+
+ Creates a Path Pocket object from a face or faces
+
+ 3D Pocket
@@ -3439,6 +3439,16 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Dressup
+
+
+ Dress-up
+
+
+
+
+ Creates a Path Dess-up object from a selected path
+
+ Please select one path object
@@ -3456,16 +3466,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Please select a Path object
-
-
- Dress-up
-
-
-
-
- Creates a Path Dess-up object from a selected path
-
- Path_DressupAxisMap
@@ -3938,12 +3938,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Creates a Path Hop object
-
-
- The selected object is not a path
-
-
- Please select one path object
@@ -3959,6 +3953,12 @@ If it is necessary to set the FinalDepth manually please select a different oper
Create Hop
+
+
+ The selected object is not a path
+
+
+ Path_Inspect
@@ -4205,11 +4205,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_Sanity
-
-
- The Job has no selected Base object.
-
- Check the path job for common errors
@@ -4460,6 +4455,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Date
+
+
+ The Job has no selected Base object.
+
+ It appears the machine limits haven't been set. Not able to check path extents.
@@ -4615,11 +4615,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Path_ToolController
-
-
- Tool Number to Load
-
- Add Tool Controller to the Job
@@ -4630,6 +4625,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Add Tool Controller
+
+
+ Tool Number to Load
+
+ Path_ToolTable
@@ -4656,11 +4656,6 @@ If it is necessary to set the FinalDepth manually please select a different oper
Creates a medial line engraving path
-
-
- VCarve requires an engraving cutter with CuttingEdgeAngle
-
- VCarve requires an engraving cutter with CuttingEdgeAngle
@@ -4671,6 +4666,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Engraver Cutting Edge Angle must be < 180 degrees.
+
+
+ VCarve requires an engraving cutter with CuttingEdgeAngle
+
+ Path_Waterline
@@ -4705,56 +4705,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Save toolbit library
-
-
- Tooltable JSON (*.json)
-
-
-
-
- HeeksCAD tooltable (*.tooltable)
-
-
-
-
- LinuxCNC tooltable (*.tbl)
-
- Open tooltable
-
-
- Save tooltable
-
-
-
-
- Rename Tooltable
-
-
-
-
- Enter Name:
-
-
-
-
- Add New Tool Table
-
-
-
-
- Delete Selected Tool Table
-
-
-
-
- Rename Selected Tool Table
-
- Tooltable editor
@@ -4965,6 +4920,11 @@ If it is necessary to set the FinalDepth manually please select a different oper
Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable)
+
+
+ Save tooltable
+
+ Tooltable XML (*.xml)
@@ -4980,6 +4940,46 @@ If it is necessary to set the FinalDepth manually please select a different oper
Object doesn't have a tooltable property
+
+
+ Rename Tooltable
+
+
+
+
+ Enter Name:
+
+
+
+
+ Add New Tool Table
+
+
+
+
+ Delete Selected Tool Table
+
+
+
+
+ Rename Selected Tool Table
+
+
+
+
+ Tooltable JSON (*.json)
+
+
+
+
+ HeeksCAD tooltable (*.tooltable)
+
+
+
+
+ LinuxCNC tooltable (*.tbl)
+
+ Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl)