diff --git a/src/Gui/Language/FreeCAD_cs.qm b/src/Gui/Language/FreeCAD_cs.qm index 13d125c01f..047af453ee 100644 Binary files a/src/Gui/Language/FreeCAD_cs.qm and b/src/Gui/Language/FreeCAD_cs.qm differ diff --git a/src/Gui/Language/FreeCAD_cs.ts b/src/Gui/Language/FreeCAD_cs.ts index d63a57953f..d81025b614 100644 --- a/src/Gui/Language/FreeCAD_cs.ts +++ b/src/Gui/Language/FreeCAD_cs.ts @@ -160,7 +160,7 @@ Insert measurement - Insert measurement + Vložit měření Insert text document @@ -168,7 +168,7 @@ Add a part - Add a part + Přidat část Add a group @@ -280,11 +280,11 @@ ExpressionLabel Enter an expression... - Enter an expression... + Zadejte výraz... Expression: - Expression: + Výraz: @@ -397,7 +397,7 @@ while doing a left or right click and move the mouse up or down Gui::Command Standard - Standard + Standardní @@ -505,17 +505,17 @@ while doing a left or right click and move the mouse up or down FreeCAD would not be possible without the contributions of - FreeCAD would not be possible without the contributions of + FreeCAD by nebyl možný bez příspěvků od Individuals Header for the list of individual people in the Credits list. - Individuals + Jednotlivci Organizations Header for the list of companies/organizations in the Credits list. - Organizations + Organizace @@ -1422,7 +1422,7 @@ Pokud toto není zaškrtnuto, musí být vlastnost pojmenována jedinečně a bu Code lines will be numbered - Code lines will be numbered + Řádky kódu budou očíslovány @@ -2556,7 +2556,7 @@ but slower response to any scene changes. Centralized - Centralized + Centrální Transparent objects: @@ -2568,7 +2568,7 @@ but slower response to any scene changes. One pass - One pass + Jeden průchod Backface pass @@ -2580,7 +2580,7 @@ but slower response to any scene changes. Eye to eye distance for stereo modes - Eye to eye distance for stereo modes + Vzdálenost mezi oky pro stereo režimy Backlight is enabled with the defined color @@ -3011,7 +3011,7 @@ You can also use the form: John Doe <john@doe.com> Default license for new documents - Default license for new documents + Výchozí licence pro nové dokumenty Creative Commons Attribution @@ -3251,11 +3251,11 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsImageImp Offscreen (New) - Offscreen (New) + Na pozadí (Nové) Offscreen (Old) - Offscreen (Old) + Na pozadí (Staré) Framebuffer (custom) @@ -3373,7 +3373,7 @@ You can also use the form: John Doe <john@doe.com> Shortcut count - Shortcut count + Počet zástupců How many recent macros should have shortcuts @@ -3381,11 +3381,11 @@ You can also use the form: John Doe <john@doe.com> Keyboard Modifiers - Keyboard Modifiers + Modifikátory klávesnice Keyboard modifiers, default = Ctrl+Shift+ - Keyboard modifiers, default = Ctrl+Shift+ + Modifikátory klávesnice, výchozí = Ctrl+Shift+ @@ -3400,11 +3400,11 @@ You can also use the form: John Doe <john@doe.com> Steps by turn - Steps by turn + Kroků na otáčku Number of steps by turn when using arrows (default = 8 : step angle = 360/8 = 45 deg) - Number of steps by turn when using arrows (default = 8 : step angle = 360/8 = 45 deg) + Počet kroků otáčení při použití šipek (výchozí hodnota = 8 : úhel kroku = 360/8 = 45 °) Corner @@ -3446,7 +3446,7 @@ Select a set and then press the button to view said configurations. Navigation settings set - Navigation settings set + Nastavení navigace Orbit style @@ -3475,8 +3475,8 @@ Turntable: the part will be rotated around the z-axis. Sets camera zoom for new documents. The value is the diameter of the sphere to fit on the screen. - Sets camera zoom for new documents. -The value is the diameter of the sphere to fit on the screen. + Nastaví přiblížení kamery pro nové dokumenty. +Hodnota je průměr koule tak, aby se vešla na obrazovku. mm @@ -3484,7 +3484,7 @@ The value is the diameter of the sphere to fit on the screen. Enable animated rotations - Enable animated rotations + Povolit animované otáčení Enable animation @@ -3492,7 +3492,7 @@ The value is the diameter of the sphere to fit on the screen. Zoom operations will be performed at position of mouse pointer - Zoom operations will be performed at position of mouse pointer + Přiblížení bude provedeno na pozici kurzoru myši Zoom at cursor @@ -3504,7 +3504,7 @@ The value is the diameter of the sphere to fit on the screen. Direction of zoom operations will be inverted - Direction of zoom operations will be inverted + Směr operace přiblížení bude obrácen Invert zoom @@ -3524,7 +3524,7 @@ Mouse tilting is not disabled by this setting. Rotations in 3D will use current cursor position as center for rotation - Rotations in 3D will use current cursor position as center for rotation + 3D Rotace bude používat aktuální pozici kurzoru jako střed rotace Isometric @@ -3568,7 +3568,7 @@ Mouse tilting is not disabled by this setting. Default camera orientation - Default camera orientation + Výchozí orientace kamery Default camera orientation when creating a new document or selecting the home view @@ -3576,7 +3576,7 @@ Mouse tilting is not disabled by this setting. Rotation mode - Rotation mode + Režim rotace Window center @@ -3584,11 +3584,11 @@ Mouse tilting is not disabled by this setting. Drag at cursor - Drag at cursor + Přetáhněte kurzorem Object center - Object center + Střed objektu Rotates to nearest possible state when clicking a cube face @@ -3600,11 +3600,11 @@ Mouse tilting is not disabled by this setting. Cube size - Cube size + Velikost krychle Size of the navigation cube - Size of the navigation cube + Velikost navigační krychle How much will be zoomed. @@ -3740,7 +3740,7 @@ Zoom step of '1' means a factor of 7.5 for every zoom step. Imperial for Civil Eng (ft, ft/sec) - Imperial for Civil Eng (ft, ft/sec) + Imperiální jednotky pro stavebnictví (ft, ft/sec) FEM (mm, N, sec) @@ -3795,19 +3795,19 @@ Zoom step of '1' means a factor of 7.5 for every zoom step. Enable selection highlighting and use specified color - Enable selection highlighting and use specified color + Povolit zvýraznění výběru a použit určenou barvu Background color for the model view - Background color for the model view + Barva pozadí pro zobrazení modelu Background will have selected color - Background will have selected color + Pozadí bude mít vybranou barvu Color gradient will get selected color as middle color - Color gradient will get selected color as middle color + Barevný přechod získá vybranou barvu jako střední barvu Bottom color @@ -3815,7 +3815,7 @@ Zoom step of '1' means a factor of 7.5 for every zoom step. Background will have selected color gradient - Background will have selected color gradient + Pozadí bude mít vybraný barevný přechod Top color @@ -3901,7 +3901,7 @@ The preference system is the one set in the general preferences. Decimals: - Decimals: + Desetinná místa: Decimals for the Quantity @@ -3909,7 +3909,7 @@ The preference system is the one set in the general preferences. Unit category: - Unit category: + Kategorie jednotky: Unit category for the Quantity @@ -3917,7 +3917,7 @@ The preference system is the one set in the general preferences. Copy the result into the clipboard - Copy the result into the clipboard + Zkopírovat výsledek do schránky @@ -3928,7 +3928,7 @@ The preference system is the one set in the general preferences. unknown unit: - unknown unit: + neznámá jednotka: @@ -4522,7 +4522,7 @@ Sloupec "Status" ukazuje zda je možné dokument obnovit. Redirect output - Redirect output + Přesměrování výstupu @@ -4617,7 +4617,7 @@ Sloupec "Status" ukazuje zda je možné dokument obnovit. Dependency - Dependency + Závislost Document @@ -4629,11 +4629,11 @@ Sloupec "Status" ukazuje zda je možné dokument obnovit. State - State + Stav Hierarchy - Hierarchy + Hierarchie Selected @@ -4831,7 +4831,7 @@ Sloupec "Status" ukazuje zda je možné dokument obnovit. Picked object list - Picked object list + Seznam vybraných objektů @@ -4904,14 +4904,14 @@ Chcete uložit provedené změny? Gui::ExpressionLineEdit Exact match - Exact match + Přesná shoda Gui::ExpressionTextEdit Exact match - Exact match + Přesná shoda @@ -5733,11 +5733,11 @@ Do you want to specify another directory? Box select - Box select + Výběr oknem On-top when selected - On-top when selected + Při výběru nahoře @@ -6123,26 +6123,26 @@ Do you want to specify another directory? Enable or disable recomputating editing object when 'skip recomputation' is enabled - Enable or disable recomputating editing object when 'skip recomputation' is enabled + Povolit nebo zakázat přepočítávání objektu, když je povoleno 'přeskočit přepočítávání' Recompute object - Recompute object + Přepočítat objekt Recompute the selected object - Recompute the selected object + Přepočítat vybraný objekt (but must be executed) - (but must be executed) + (ale musí být provedeno) Gui::VectorListEditor Vectors - Vectors + Vektory Table @@ -6745,23 +6745,23 @@ Dejte si pozor na místo, kam klikáte. Delete failed - Delete failed + Smazání se nezdařilo Dependency error - Dependency error + Chyba závislosti Copy selected - Copy selected + Kopírovat výběr Copy active document - Copy active document + Kopírovat aktivní dokument Copy all documents - Copy all documents + Kopírovat všechny dokumenty Paste @@ -6769,7 +6769,7 @@ Dejte si pozor na místo, kam klikáte. Expression error - Expression error + Chyba výrazu Failed to parse some of the expressions. @@ -6779,11 +6779,11 @@ Please check the Report View for more details. Failed to paste expressions - Failed to paste expressions + Nepodařilo se vložit výrazy Simple group - Simple group + Jednoduchá skupina Group with links @@ -6823,7 +6823,7 @@ Please check the Report View for more details. Invalid name - Invalid name + Neplatný název The property name or group name must only contain alpha numericals, @@ -6833,7 +6833,7 @@ underscore, and must not start with a digit. The property '%1' already exists in '%2' - The property '%1' already exists in '%2' + Vlastnost '%1' již existuje v '%2' Add property @@ -6853,7 +6853,7 @@ underscore, and must not start with a digit. Failed to save document - Failed to save document + Dokumentu se nezdařilo uložit Documents contains cyclic dependencies. Do you still want to save them? @@ -6885,7 +6885,7 @@ Choose 'Abort' to abort Apply answer to all - Apply answer to all + Použít odpověď na všechny Drag & drop failed @@ -6893,7 +6893,7 @@ Choose 'Abort' to abort Override colors... - Override colors... + Přepsat barvy... Identical physical path detected. It may cause unwanted overwrite of existing document! @@ -6929,7 +6929,7 @@ Cesta: Identical physical path - Identical physical path + Identická fyzická cesta Error @@ -6951,9 +6951,9 @@ Cesta: Physical path: - + -Physical path: +Fyzická cesta: @@ -7399,7 +7399,7 @@ Physical path: Select the objects to export before choosing Export. - Select the objects to export before choosing Export. + Vyberte objekty, které chcete exportovat před výběrem exportu. @@ -7440,7 +7440,7 @@ Physical path: Donate to FreeCAD development - Donate to FreeCAD development + Přispět na vývoj FreeCAD @@ -7636,7 +7636,7 @@ Physical path: Import selected external link(s) - Import selected external link(s) + Importovat vybrané externí odkaz(y) @@ -7651,7 +7651,7 @@ Physical path: Import all links of the active document - Import all links of the active document + Importovat všechny odkazy aktivního dokumentu @@ -7782,7 +7782,7 @@ Physical path: Unlink - Unlink + Zrušit propojení Strip on level of link @@ -8184,11 +8184,11 @@ Physical path: Recent macros - Recent macros + Nedávná makra Recent macro list - Recent macro list + Seznam nedávných maker @@ -8394,11 +8394,11 @@ Physical path: &Send to Python Console - &Send to Python Console + &Poslat do konzoly Pythonu Sends the selected object to the Python console - Sends the selected object to the Python console + Odelat vybraný objekt do konzoly Pythonu @@ -8473,7 +8473,7 @@ Physical path: Add text document to active document - Add text document to active document + Přidat textový dokument do aktivního dokumentu @@ -8645,11 +8645,11 @@ Physical path: Collapse selected item - Collapse selected item + Sbalit vybranou položku Collapse currently selected tree items - Collapse currently selected tree items + Sbalit aktuálně vybrané položky stromu @@ -8660,11 +8660,11 @@ Physical path: Expand selected item - Expand selected item + Rozbalit vybranou položku Expand currently selected tree items - Expand currently selected tree items + Rozbalit aktuálně vybrané položky stromu @@ -8679,7 +8679,7 @@ Physical path: Select all instances of the current selected object - Select all instances of the current selected object + Vybrat všechny instance aktuálně vybraného objektu @@ -8690,7 +8690,7 @@ Physical path: TreeView actions - TreeView actions + Akce zobrazení stromu TreeView behavior options and actions @@ -8889,7 +8889,7 @@ Physical path: Set to default home view - Set to default home view + Nastavit jako výchozí domovské zobrazení @@ -9035,11 +9035,11 @@ Physical path: Restore saved camera - Restore saved camera + Obnovit uloženou kameru Restore saved camera settings - Restore saved camera settings + Obnovit uložené nastavení kamery @@ -9069,7 +9069,7 @@ Physical path: Rotate the view by 90° counter-clockwise - Rotate the view by 90° counter-clockwise + Otočit pohled o 90° doleva @@ -9084,7 +9084,7 @@ Physical path: Rotate the view by 90° clockwise - Rotate the view by 90° clockwise + Otočit pohled o 90° doprava @@ -9095,11 +9095,11 @@ Physical path: Save current camera - Save current camera + Uložit aktuální kameru Save current camera settings - Save current camera settings + Uložit aktuální nastavení kamery @@ -9301,7 +9301,7 @@ Physical path: Pre-selection - Pre-selection + Předvýběr Preselect the object in 3D view when mouse over the tree item @@ -9361,7 +9361,7 @@ Physical path: Sync placement - Sync placement + Synchronizovat umístění Auto adjust placement on drag and drop objects across coordinate systems @@ -9376,7 +9376,7 @@ Physical path: Sync selection - Sync selection + Synchronizovat výběr Auto expand tree item when the corresponding object is selected in 3D view @@ -9391,7 +9391,7 @@ Physical path: Sync view - Sync view + Synchronizovat zobrazení Auto switch to the 3D view containing the selected item diff --git a/src/Gui/Language/FreeCAD_de.qm b/src/Gui/Language/FreeCAD_de.qm index f6fa085fe3..0b688a0632 100644 Binary files a/src/Gui/Language/FreeCAD_de.qm and b/src/Gui/Language/FreeCAD_de.qm differ diff --git a/src/Gui/Language/FreeCAD_de.ts b/src/Gui/Language/FreeCAD_de.ts index d32c57eb50..13c4f62754 100644 --- a/src/Gui/Language/FreeCAD_de.ts +++ b/src/Gui/Language/FreeCAD_de.ts @@ -1633,7 +1633,7 @@ horizontal space in Python console User macros location: - Speicher-Ort der Benutzer-Makros: + Speicherort der Benutzermakros: Rename @@ -7501,7 +7501,7 @@ Physischer Pfad: Documentation for users on the FreeCAD website - Benutzer Dokumentation auf der FreeCAD Website + Benutzerdokumentation auf der FreeCAD-Website diff --git a/src/Gui/Language/FreeCAD_el.qm b/src/Gui/Language/FreeCAD_el.qm index f8d5fbe93b..26545a59ce 100644 Binary files a/src/Gui/Language/FreeCAD_el.qm and b/src/Gui/Language/FreeCAD_el.qm differ diff --git a/src/Gui/Language/FreeCAD_el.ts b/src/Gui/Language/FreeCAD_el.ts index f3f336d91b..654d5bebfb 100644 --- a/src/Gui/Language/FreeCAD_el.ts +++ b/src/Gui/Language/FreeCAD_el.ts @@ -280,11 +280,11 @@ ExpressionLabel Enter an expression... - Enter an expression... + Εισάγετε μια έκφραση... Expression: - Expression: + Έκφραση: @@ -505,17 +505,17 @@ while doing a left or right click and move the mouse up or down FreeCAD would not be possible without the contributions of - FreeCAD would not be possible without the contributions of + Το FreeCAD δεν θα ήταν δυνατό χωρίς τις συνεισφορές του Individuals Header for the list of individual people in the Credits list. - Individuals + Ατομικά Organizations Header for the list of companies/organizations in the Credits list. - Organizations + Οργανισμός @@ -1422,7 +1422,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces Code lines will be numbered - Code lines will be numbered + Οι γραμμές κώδικα θα αριθμηθούν @@ -1744,29 +1744,29 @@ Perhaps a file permission error? Guided Walkthrough - Guided Walkthrough + Καθοδήγηση - Περιήγηση This will guide you in setting up this macro in a custom global toolbar. Instructions will be in red text inside the dialog. Note: your changes will be applied when you next switch workbenches - This will guide you in setting up this macro in a custom global toolbar. Instructions will be in red text inside the dialog. + Αυτό θα σας καθοδηγήσει στη ρύθμιση αυτής της μακροεντολής σε μια προσαρμοσμένη καθολική γραμμή εργαλείων. Οι οδηγίες θα είναι με κόκκινο κείμενο μέσα στο διάλογο. -Note: your changes will be applied when you next switch workbenches +Σημείωση: οι αλλαγές σας θα εφαρμοστούν όταν αλλάξετε τους επόμενους πάγκους εργασίας Walkthrough, dialog 1 of 2 - Walkthrough, dialog 1 of 2 + Περιγράφει, διαλόγου 1 από 2 Walkthrough instructions: Fill in missing fields (optional) then click Add, then Close - Walkthrough instructions: Fill in missing fields (optional) then click Add, then Close + Οδηγίες περιγραφή: Συμπληρώστε τα πεδία που λείπουν (προαιρετικά) και μετά κάντε κλικ στην επιλογή Προσθήκη, έπειτα Κλείσιμο Walkthrough, dialog 1 of 1 - Walkthrough, dialog 1 of 1 + Περιήγηση, διαλόγου 1 από 1 Walkthrough, dialog 2 of 2 @@ -3051,7 +3051,7 @@ You can also use the form: John Doe <john@doe.com> Gui::Dialog::DlgSettingsDocumentImp The format of the date to use. - The format of the date to use. + Μορφή ημερομηνίας προς χρήση Default @@ -3350,47 +3350,47 @@ You can also use the form: John Doe <john@doe.com> Commands executed by macro scripts are shown in Python console - Commands executed by macro scripts are shown in Python console + Οι εντολές που εκτελούνται από μακροεντολές εμφανίζονται στην κονσόλα Python Recorded macros will also contain user interface commands - Recorded macros will also contain user interface commands + Οι εγγραφόμενες μακροεντολές θα περιέχουν επίσης εντολές διεπαφής χρήστη Recorded macros will also contain user interface commands as comments - Recorded macros will also contain user interface commands as comments + Οι εγγραφόμενες μακροεντολές θα περιέχουν επίσης εντολές διεπαφής χρήστη ως σχόλια The directory in which the application will search for macros - The directory in which the application will search for macros + Ο κατάλογος στον οποίο η εφαρμογή θα αναζητήσει μακροεντολές Recent macros menu - Recent macros menu + Μενού πρόσφατων μακροεφαρμογών Size of recent macro list - Size of recent macro list + Μέγεθος πρόσφατης λίστας μακροεντολών How many macros should be listed in recent macros list - How many macros should be listed in recent macros list + Πόσες μακροεντολές θα πρέπει να εμφανίζονται στη λίστα πρόσφατων μακροεντολών Shortcut count - Shortcut count + Πλήθος συντομεύσεων How many recent macros should have shortcuts - How many recent macros should have shortcuts + Πόσες πρόσφατες μακροεντολές θα πρέπει να έχουν συντομεύσεις Keyboard Modifiers - Keyboard Modifiers + Τροποποιητές Πληκτρολογίου Keyboard modifiers, default = Ctrl+Shift+ - Keyboard modifiers, default = Ctrl+Shift+ + Τροποποιήσεις πληκτρολογίου, προεπιλογή = Ctrl+Shift+ @@ -3401,15 +3401,15 @@ You can also use the form: John Doe <john@doe.com> Navigation cube - Navigation cube + Τύπος Πλοήγησης Steps by turn - Steps by turn + Βήματα κατά την περιστροφή Number of steps by turn when using arrows (default = 8 : step angle = 360/8 = 45 deg) - Number of steps by turn when using arrows (default = 8 : step angle = 360/8 = 45 deg) + Αριθμός βημάτων με στροφή κατά τη χρήση βελών (προεπιλογή = 8 : γωνία βημάτων = 360/8 = 45 deg) Corner @@ -3417,7 +3417,7 @@ You can also use the form: John Doe <john@doe.com> Corner where navigation cube is shown - Corner where navigation cube is shown + Γωνία όπου εμφανίζεται ο κύβος πλοήγησης Top left @@ -3442,8 +3442,8 @@ You can also use the form: John Doe <john@doe.com> List the mouse button configs for each chosen navigation setting. Select a set and then press the button to view said configurations. - List the mouse button configs for each chosen navigation setting. -Select a set and then press the button to view said configurations. + Εμφάνιση των ρυθμίσεων του ποντικιού για κάθε επιλεγμένη ρύθμιση πλοήγησης. +Επιλέξτε ένα σετ και στη συνέχεια πατήστε το κουμπί για να δείτε αυτές τις ρυθμίσεις. Mouse... @@ -3451,7 +3451,7 @@ Select a set and then press the button to view said configurations. Navigation settings set - Navigation settings set + Οι ρυθμίσεις πλοήγησης ορίστηκαν Orbit style @@ -3601,21 +3601,21 @@ Mouse tilting is not disabled by this setting. Rotate to nearest - Rotate to nearest + Περιστροφή στο πλησιέστερο Cube size - Cube size + Μέγεθος κύβου Size of the navigation cube - Size of the navigation cube + Μέγεθος του κύβου πλοήγησης How much will be zoomed. Zoom step of '1' means a factor of 7.5 for every zoom step. - How much will be zoomed. -Zoom step of '1' means a factor of 7.5 for every zoom step. + Πόσο θα μεγεθύνεται. +Το βήμα ζουμ του '1' σημαίνει ένα συντελεστή 7,5 για κάθε βήμα ζουμ. @@ -3642,7 +3642,7 @@ Zoom step of '1' means a factor of 7.5 for every zoom step. Add checkboxes for selection in document tree - Add checkboxes for selection in document tree + Προσθήκη πλαισίων επιλογής στο δέντρο εγγράφων @@ -3933,7 +3933,7 @@ The preference system is the one set in the general preferences. unknown unit: - unknown unit: + άγνωστη μονάδα: @@ -4638,7 +4638,7 @@ The 'Status' column shows whether the document could be recovered. Hierarchy - Hierarchy + Ιεραρχία Selected @@ -4646,7 +4646,7 @@ The 'Status' column shows whether the document could be recovered. Partial - Partial + Μερικός @@ -4722,11 +4722,11 @@ The 'Status' column shows whether the document could be recovered. Display message types - Display message types + Εμφάνιση μηνύματος Normal messages - Normal messages + Κανονικά μηνύματα Log messages diff --git a/src/Gui/Language/FreeCAD_pl.qm b/src/Gui/Language/FreeCAD_pl.qm index 77703d4ca1..621bdbc186 100644 Binary files a/src/Gui/Language/FreeCAD_pl.qm and b/src/Gui/Language/FreeCAD_pl.qm differ diff --git a/src/Gui/Language/FreeCAD_pl.ts b/src/Gui/Language/FreeCAD_pl.ts index 7fd08cc12e..2b7d6dedc7 100644 --- a/src/Gui/Language/FreeCAD_pl.ts +++ b/src/Gui/Language/FreeCAD_pl.ts @@ -824,7 +824,7 @@ Jeśli ta opcja nie jest zaznaczona, własność musi być jednoznacznie nazwana Status text: - Tekst stanu: + Tekst statusu: Tool tip: @@ -1967,7 +1967,7 @@ Proszę podać inny katalog. Look at - Zerknij na + Weź pod uwagę Groups @@ -4177,7 +4177,7 @@ Kolumna "Aktualny status" pokazuje, czy dokument może być odzyskany. %1 Downloads - %1 Pobrań + Pobrano %1 @@ -6910,7 +6910,7 @@ Wybierz 'Przerwij', aby zrezygnować Please check report view for more... -Sprawdź widok raportu, aby uzyskać więcej informacji... +Proszę sprawdź widok raportu, aby uzyskać więcej informacji... @@ -7765,7 +7765,7 @@ Physical path: Go to the deepest linked object - Przejdź do najgłębszego połączonego obiektu + Przejdź do najgłębiej połączonego obiektu Select the deepest linked object and switch to its owner document @@ -7825,7 +7825,7 @@ Physical path: Step into - Krok w przód + Wejdź do @@ -7836,7 +7836,7 @@ Physical path: Step over - Przejdź + Krok dalej @@ -8527,7 +8527,7 @@ Physical path: Toggles clipping plane for active view - Przełącza przycinania płaszczyzny dla aktywnego widoku + Przełącza płaszczyznę przycinania dla aktywnego widoku @@ -8632,7 +8632,7 @@ Physical path: Transform the selected object in the 3d view - Przekształcenie zaznaczonego obiektu do widoku 3d + Przekształć wybrany obiekt w widoku 3D @@ -8917,7 +8917,7 @@ Physical path: Issue the camera position to the console and to a macro, to easily recall this position - Wysyłanie danych pozycji ujęcia widoku do konsoli i do makra, aby łatwo przywołać tę pozycję + Wyślij dane pozycji ujęcia widoku do konsoli i do makra, aby łatwo przywołać tę pozycję @@ -8947,7 +8947,7 @@ Physical path: Switch stereo viewing to Interleaved Rows - Przełączyć wyświetlanie widok z przeplotem wierszy + Przełącz wyświetlanie na tryb stereo z przeplotem wierszy @@ -8992,7 +8992,7 @@ Physical path: Switch stereo viewing to red/cyan - Przełącz widok stereo na czerwony/cyjan + Przełącz widok stereo na czerwony / cyjan diff --git a/src/Gui/Language/FreeCAD_ro.qm b/src/Gui/Language/FreeCAD_ro.qm index 98fdbc3780..7c1d04095e 100644 Binary files a/src/Gui/Language/FreeCAD_ro.qm and b/src/Gui/Language/FreeCAD_ro.qm differ diff --git a/src/Gui/Language/FreeCAD_ro.ts b/src/Gui/Language/FreeCAD_ro.ts index 7d6d909a26..845a57c562 100644 --- a/src/Gui/Language/FreeCAD_ro.ts +++ b/src/Gui/Language/FreeCAD_ro.ts @@ -280,11 +280,11 @@ ExpressionLabel Enter an expression... - Enter an expression... + Introduceți o expresie... Expression: - Expression: + Expresie: @@ -506,17 +506,17 @@ while doing a left or right click and move the mouse up or down FreeCAD would not be possible without the contributions of - FreeCAD would not be possible without the contributions of + FreeCAD nu ar fi posibil fără contribuțiile Individuals Header for the list of individual people in the Credits list. - Individuals + Persoane Organizations Header for the list of companies/organizations in the Credits list. - Organizations + Organizaţii @@ -1423,7 +1423,7 @@ Cu toate acestea, proprietatea este încă utilizată într-un script cu numele Code lines will be numbered - Code lines will be numbered + Liniile de cod vor fi numerotate @@ -1742,41 +1742,41 @@ Perhaps a file permission error? Guided Walkthrough - Guided Walkthrough + Walkthrough ghidat This will guide you in setting up this macro in a custom global toolbar. Instructions will be in red text inside the dialog. Note: your changes will be applied when you next switch workbenches - This will guide you in setting up this macro in a custom global toolbar. Instructions will be in red text inside the dialog. + Acesta vă va ghida în configurarea acestui macro într-o bară de instrumente globală particularizată. Instrucțiunile vor fi scrise în roșu în interiorul dialogului. -Note: your changes will be applied when you next switch workbenches +Notă: modificările dvs. vor fi aplicate la schimbarea următoare a bancului de lucru Walkthrough, dialog 1 of 2 - Walkthrough, dialog 1 of 2 + Walkthrough, dialog 1 din 2 Walkthrough instructions: Fill in missing fields (optional) then click Add, then Close - Walkthrough instructions: Fill in missing fields (optional) then click Add, then Close + Instrucțiuni walkthrough: Completați câmpurile lipsă (opțional) apoi apăsați „Adăugați”, apoi Închide Walkthrough, dialog 1 of 1 - Walkthrough, dialog 1 of 1 + Walkthrough, dialog 1 din 1 Walkthrough, dialog 2 of 2 - Walkthrough, dialog 2 of 2 + Walkthrough, dialog 2 din 2 Walkthrough instructions: Click right arrow button (->), then Close. - Walkthrough instructions: Click right arrow button (->), then Close. + Instrucțiuni walkthrough: Apasă butonul săgeată dreapta (->), apoi Închide. Walkthrough instructions: Click New, then right arrow (->) button, then Close. - Walkthrough instructions: Click New, then right arrow (->) button, then Close. + Instrucțiuni walkthrough: Apasă butonul Nou, apoi săgeată dreapta (->), apoi Închide. @@ -1944,7 +1944,7 @@ Specify another directory, please. Type in a group name to find it - Type in a group name to find it + Scrie un nume de grup pentru a-l găsi Search Group @@ -2303,12 +2303,12 @@ pe ecran în timpul afișării erorii When a warning has occurred, the Report View dialog becomes visible on-screen while displaying the warning - When a warning has occurred, the Report View dialog becomes visible -on-screen while displaying the warning + Când a apărut un avertisment, fereastra Vizualizare Raport va deveni vizibilă +pe ecran în timpul afișării avertismentului Show report view on warning - Show report view on warning + Arată Vizualizare Raport pentru avertismente When a normal message has occurred, the Report View dialog becomes visible diff --git a/src/Gui/Language/FreeCAD_sv-SE.qm b/src/Gui/Language/FreeCAD_sv-SE.qm index 1d675295ae..1e3d3ca7ec 100644 Binary files a/src/Gui/Language/FreeCAD_sv-SE.qm and b/src/Gui/Language/FreeCAD_sv-SE.qm differ diff --git a/src/Gui/Language/FreeCAD_sv-SE.ts b/src/Gui/Language/FreeCAD_sv-SE.ts index 1ce980ccb0..2db2a2ad73 100644 --- a/src/Gui/Language/FreeCAD_sv-SE.ts +++ b/src/Gui/Language/FreeCAD_sv-SE.ts @@ -515,7 +515,7 @@ while doing a left or right click and move the mouse up or down Organizations Header for the list of companies/organizations in the Credits list. - Organizations + Organisationer @@ -3931,7 +3931,7 @@ Inställningssystemet är det som anges i de allmänna inställningarna. unknown unit: - unknown unit: + okänd enhet: diff --git a/src/Gui/Language/FreeCAD_zh-CN.qm b/src/Gui/Language/FreeCAD_zh-CN.qm index 0f1a21ecd9..251e225e25 100644 Binary files a/src/Gui/Language/FreeCAD_zh-CN.qm and b/src/Gui/Language/FreeCAD_zh-CN.qm differ diff --git a/src/Gui/Language/FreeCAD_zh-CN.ts b/src/Gui/Language/FreeCAD_zh-CN.ts index afb02b8dda..fce07b1ae8 100644 --- a/src/Gui/Language/FreeCAD_zh-CN.ts +++ b/src/Gui/Language/FreeCAD_zh-CN.ts @@ -168,11 +168,11 @@ Add a part - Add a part + 添加零件 Add a group - Add a group + 添加组 Align @@ -188,7 +188,7 @@ Link Transform - Link Transform + 链接变换 Measure distance @@ -1422,7 +1422,7 @@ If this is not ticked, then the property must be uniquely named, and it is acces Code lines will be numbered - Code lines will be numbered + 代码行将被编号 @@ -2901,7 +2901,7 @@ bounding box size of the 3D object that is currently displayed. Compression level for FCStd files - Compression level for FCStd files + FCStd 文件的压缩级别 All changes in documents are stored so that they can be undone/redone @@ -3001,7 +3001,7 @@ You can also use the form: John Doe <john@doe.com> Default company name to use for new files - Default company name to use for new files + 用于新文件的默认公司名称 Default license for new documents @@ -3272,7 +3272,7 @@ You can also use the form: John Doe <john@doe.com> Load Selected - Load Selected + 加载所选 <html><head/><body><p>Available unloaded workbenches</p></body></html> @@ -3367,7 +3367,7 @@ You can also use the form: John Doe <john@doe.com> Shortcut count - Shortcut count + 快捷方式计数 How many recent macros should have shortcuts @@ -3738,7 +3738,7 @@ Zoom step of '1' means a factor of 7.5 for every zoom step. FEM (mm, N, sec) - FEM (mm, N, sec) + FEM (mm, N, sec) @@ -3793,15 +3793,15 @@ Zoom step of '1' means a factor of 7.5 for every zoom step. Background color for the model view - Background color for the model view + 模型视图的背景颜色 Background will have selected color - Background will have selected color + 背景将使用所选颜色 Color gradient will get selected color as middle color - Color gradient will get selected color as middle color + 颜色渐变将使用所选颜色作为中间颜色 Bottom color @@ -3922,7 +3922,7 @@ The preference system is the one set in the general preferences. unknown unit: - unknown unit: + 未知单位： @@ -4507,11 +4507,11 @@ The 'Status' column shows whether the document could be recovered. Address: - Address: + 地址： Port: - Port: + 端口： Redirect output @@ -6758,7 +6758,7 @@ Be aware the point where you click matters. Expression error - Expression error + 表达式错误 Failed to parse some of the expressions. @@ -6846,7 +6846,7 @@ underscore, and must not start with a digit. Documents contains cyclic dependencies. Do you still want to save them? - Documents contains cyclic dependencies. Do you still want to save them? + 文档包含循环依赖。您仍然想要保存它们吗？ Undo @@ -6878,11 +6878,11 @@ Choose 'Abort' to abort Drag & drop failed - Drag & drop failed + 拖放失败 Override colors... - Override colors... + 覆盖颜色... Identical physical path detected. It may cause unwanted overwrite of existing document! @@ -6913,12 +6913,12 @@ Document: Path: - - Path: + + 路径： Identical physical path - Identical physical path + 相同的物理路径 Error @@ -6940,9 +6940,9 @@ Document: Physical path: - + -Physical path: +物理路径： @@ -6964,7 +6964,7 @@ Physical path: Box element selection - Box element selection + 方框元素选择 @@ -7331,7 +7331,7 @@ Physical path: Change the draw style of the objects - Change the draw style of the objects + 更改对象的绘制样式 @@ -7399,7 +7399,7 @@ Physical path: Expression actions - Expression actions + 表达式动作 diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_af.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_af.ts index 9f99222a7e..9e5e599643 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_af.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_af.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -87,107 +87,107 @@ Macro could not be removed. - + Unable to download addon list. Unable to download addon list. - + Workbenches list was updated. Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git @@ -207,72 +207,72 @@ Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ar.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ar.ts index 0081d03ece..a9237a61a2 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ar.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ar.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -87,107 +87,107 @@ Macro could not be removed. - + Unable to download addon list. Unable to download addon list. - + Workbenches list was updated. Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git @@ -207,72 +207,72 @@ Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts index f7d970f9d5..ae79e854d9 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ca.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Localització de la instal·lació @@ -87,107 +87,107 @@ No s'ha pogut eliminar la macro. - + Unable to download addon list. No es pot descarregar la llista d'extensions. - + Workbenches list was updated. Banc de treball actualitzat. - + Outdated GitPython detected, consider upgrading with pip. S'ha detectat GitPython obsolet, plantegeu-vos l'actualització amb pip. - + List of macros successfully retrieved. La llista de macos s'ha recuperat correctament. - + Retrieving description... S'està recuperant la descripció... - + Retrieving info from S'està recuperant informació de - + An update is available for this addon. Hi ha una actualització disponible per a aquest complement. - + This addon is already installed. Aquest complement ja s'ha instal·lat. - + Retrieving info from git S'està recuperant informació de git - + Retrieving info from wiki S'està recuperant informació del wiki - + GitPython not found. Using standard download instead. No s'ha trobat GitPython. En lloc seu s'utilitza la descàrrega estàndard. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. La vostra versió de python n'o sembla ser compatible amb els fitxers ZIP. No es pot procedir. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. El banc de treball s'ha instal·lat correctament. Reinicieu FreeCAD per aplicar els canvis. - + Missing workbench Falta el banc de treball - + Missing python module Manca el mòdul python - + Missing optional python module (doesn't prevent installing) Manca el mòdul python opcional (n'o impedeix la instal·lació) - + Some errors were found that prevent to install this workbench S'han trobat alguns errors que impedeixen instal·lar aquest banc de treball - + Please install the missing components first. Si us plau, instal·leu primer els components que manquen. - + Error: Unable to download S'ha produït un error: no es pot baixar - + Successfully installed S'ha instal·lat correctament - + GitPython not installed! Cannot retrieve macros from git No s'ha instal·lat GitPython! No es poden recuperar les macros de git @@ -207,72 +207,72 @@ S'ha de reiniciar - + This macro is already installed. Aquesta macro ja s'ha instal·lat. - + A macro has been installed and is available under Macro -> Macros menu S'ha instal·lat una macro i està disponible en el menú Macro -> Macros - + This addon is marked as obsolete Aquest complement està marcat com a obsolet - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Normalment significa que ja no és mantingut i que algun complement més avançat d'aquesta llista ofereix la mateixa funcionalitat. - + Error: Unable to locate zip from S'ha produït un error: no s'ha pogut localitzar el zip des de - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path S'ha produït un error amb la recuperació de macros de Git, possiblement l'executable de Git no estigui en la ruta - + This addon is marked as Python 2 Only Aquest complement està marcat només com a Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. És possible que aquest banc de treball ja no es mantingui i instal·lar-lo en un sistema Python 3 provocarà probablement errors en iniciar-se o en ús. - + User requested updating a Python 2 workbench on a system running Python 3 - L'usuari ha sol·licitat l'actualització d'un banc de treball Python 2 en un sistema que executa Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. El banc de treball s'ha instal·lat correctament. Reinicieu FreeCAD per aplicar els canvis. - + User requested installing a Python 2 workbench on a system running Python 3 - L'usuari ha sol·licitat l'actualització d'un banc de treball Python 2 en un sistema que executa Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Sembla que és hi ha algun problema de connexió amb el Wiki, per tant no es pot recuperar la llista de macros de la Wiki en aquest moment - + Raw markdown displayed Mostrant Markdown sense processar - + Python Markdown library is missing. Falta la biblioteca Python Markdown. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts index de96a1f51c..cbe595d0f5 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_cs.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Umístění instalace @@ -87,107 +87,107 @@ Makro nelze odstranit. - + Unable to download addon list. Seznam doplňků nelze stáhnout. - + Workbenches list was updated. Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Zjištěn zastaralý GitPython, zvažte upgrade pomocí pip. - + List of macros successfully retrieved. Seznam maker úspěšně načten. - + Retrieving description... Načítání popisu... - + Retrieving info from Načítání informací z - + An update is available for this addon. Pro tento doplněk je dostupná aktualizace. - + This addon is already installed. Toto rozšíření je již nainstalováno. - + Retrieving info from git Načítání informací z gitu - + Retrieving info from wiki Načítání informací z wiki - + GitPython not found. Using standard download instead. GitPython nenalezen. Použijte standardní způsob stažení. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Vaše verze pythonu pravděpodobně nepodporuje ZIP soubory. Nelze pokračovat. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Chybějící modul python - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Nejprve prosím nainstalujte chybějící komponenty. - + Error: Unable to download Chyba: Nelze stáhnout - + Successfully installed Úspěšně nainstalováno - + GitPython not installed! Cannot retrieve macros from git GitPython není nainstalován! Nelze načíst makra z gitu @@ -207,72 +207,72 @@ Je vyžadován restart - + This macro is already installed. Toto makro je již nainstalováno. - + A macro has been installed and is available under Macro -> Macros menu Makro bylo nainstalováno a je k dispozici v menu Makro -> Makra - + This addon is marked as obsolete Tento doplněk je označen jako zastaralý - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. To obvykle znamená, že již není udržován a některé pokročilejší doplňky v tomto seznamu poskytují stejnou funkčnost. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only Tento doplněk je označen pouze jako Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Zdá se, že je problém s připojením k Wiki, proto momentálně nelze získat seznam maker Wiki - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Chybí python knihovna Markdown. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts index 4914964f47..00fdcf76a0 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_de.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installationsort @@ -87,107 +87,107 @@ Das Makro konnte nicht entfernt werden. - + Unable to download addon list. Die Addon-Liste konnte nicht geladen werden. - + Workbenches list was updated. Die Liste der Arbeitsbereiche wurde aktualisiert. - + Outdated GitPython detected, consider upgrading with pip. Es wurde eine veraltete GitPython-Version erkannt, erwäge das Upgrade mit Pip. - + List of macros successfully retrieved. Die Makro-Liste wurde erfolgreich abgerufen. - + Retrieving description... Beschreibung wird abgerufen... - + Retrieving info from Informationen werden abgerufen von - + An update is available for this addon. Für dieses Addon ist ein Update verfügbar. - + This addon is already installed. Dieses Addon ist bereits installiert. - + Retrieving info from git Informationen werden von Git abgerufen - + Retrieving info from wiki Informationen werden aus den Wiki abgerufen - + GitPython not found. Using standard download instead. GitPython wurde nicht gefunden. Stattdessen wird der Standarddownload verwendet. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Ihre Version von Python scheint ZIP-Dateien nicht zu unterstützen. Aktion kann nicht fortgesetzt werden. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Arbeitsbreich erfolgreich installiert. Bitte starten Sie FreeCAD neu, um die Änderungen anzuwenden. - + Missing workbench Fehlender Arbeitsbereich - + Missing python module Fehlendes Python-Modul - + Missing optional python module (doesn't prevent installing) Fehlendes optionales Python-Modul (verhindert nicht die Installation) - + Some errors were found that prevent to install this workbench Einige Fehler verhindern die Installation dieses Arbeitsbereiches - + Please install the missing components first. Bitte installieren Sie zuerst die fehlenden Komponenten. - + Error: Unable to download Fehler: Download nicht möglich - + Successfully installed Installation erfolgreich - + GitPython not installed! Cannot retrieve macros from git GitPython is nicht installiert! Makros können nicht von Git abgerufen werden @@ -207,72 +207,72 @@ Neustart erforderlich - + This macro is already installed. Dieses Makro ist bereits installiert. - + A macro has been installed and is available under Macro -> Macros menu Ein Makro wurde installiert und ist verfügbar unter Makro -> Makros-Menü - + This addon is marked as obsolete Dieses Addon ist als veraltet markiert - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Dies bedeutet normalerweise, dass es nicht mehr gewartet wird und ein fortschrittlicheres Addon in dieser Liste die gleiche Funktionalität bietet. - + Error: Unable to locate zip from Fehler: Zip-Datei kann nicht gefunden werden von - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Ein Fehler ist bei der Git-Makro Abfrage aufgetreten, möglicherweise befindet sich die ausführbare Git-Datei nicht in dem Pfad - + This addon is marked as Python 2 Only Dieses Addon ist als nur für Python 2 gekennzeichnet - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Dieser Arbeitsbereich wird möglicherweise nicht mehr gewartet und die Installation auf einem Python-3-System wird höchstwahrscheinlich zu Fehlern beim Start oder während der Nutzung führen. - + User requested updating a Python 2 workbench on a system running Python 3 - Der Benutzer hat die Aktualisierung eines Python-2-Arbeitsbereichs auf einem System mit Python 3 angefordert - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Arbeitsbreich erfolgreich aktualisiert. Bitte starten Sie FreeCAD neu, um die Änderungen zu übernehmen. - + User requested installing a Python 2 workbench on a system running Python 3 - Der Benutzer hat die Installation eines Python-2-Arbeitsbereichs auf einem System mit Python 3 angefordert - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Anscheinend ist ein Problem beim Verbinden mit dem Wiki aufgetreten, daher kann die Wiki-Makroliste zu diesem Zeitpunkt nicht abgerufen werden - + Raw markdown displayed Unbearbeitetes Markdown angezeigt - + Python Markdown library is missing. Python Markdown Bibliothek fehlt. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts index 13ca0bfab1..1ae63456e1 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_el.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -87,107 +87,107 @@ Η μακροεντολή δεν μπορεί να αφαιρεθεί. - + Unable to download addon list. Δεν είναι δυνατή η λήψη λίστας πρόσθετων. - + Workbenches list was updated. Ενημερώθηκε η λίστα πάγκων εργασίας. - + Outdated GitPython detected, consider upgrading with pip. Ανιχνεύθηκε ξεπερασμένη έκδοση GitPython, εξετάστε το ενδεχόμενο αναβάθμισης με το pip. - + List of macros successfully retrieved. Η λίστα μακροεντολών ανακτήθηκε επιτυχώς. - + Retrieving description... Ανάκτηση περιγραφής... - + Retrieving info from Ανάκτηση πληροφοριών από - + An update is available for this addon. Υπάρχει διαθέσιμη ενημέρωση για αυτό το πρόσθετο. - + This addon is already installed. Αυτό το πρόσθετο είναι ήδη εγκατεστημένο. - + Retrieving info from git Ανάκτηση πληροφοριών από το git - + Retrieving info from wiki Ανάκτηση πληροφοριών από το wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Η δικιά σας έκδοση της python δεν φαίνεται να υποστηρίζει αρχεία ZIP. Δεν είναι δυνατή η συνέχιση. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Ο πάγκος εργασίας εγκαταστάθηκε επιτυχώς. Παρακαλώ επανεκκινήστε το FreeCAD για να εφαρμόσετε τις αλλαγές. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Βρέθηκαν κάποια σφάλματα που εμποδίζουν την εγκατάσταση αυτού του πάγκου εργασίας - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Σφάλμα: Δεν είναι δυνατή η λήψη - + Successfully installed Επιτυχής εγκατάσταση - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git @@ -207,72 +207,72 @@ Απαιτείται επανεκκίνηση - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts index 779facfd49..4e72375887 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_es-ES.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Ubicación de la instalación @@ -87,107 +87,107 @@ No se pudo quitar el Macro. - + Unable to download addon list. No se puede descargar la lista de complementos. - + Workbenches list was updated. Lista de entornos de trabajo actualizada. - + Outdated GitPython detected, consider upgrading with pip. Detectado GitPython caducado, considere actualizar con pip. - + List of macros successfully retrieved. La lista de macros fue recuperada con éxito. - + Retrieving description... Recuperando la descripción... - + Retrieving info from Recuperando información de - + An update is available for this addon. Una actualización está disponible para este complemento. - + This addon is already installed. Este complemento ya está instalado. - + Retrieving info from git Recuperando información de git - + Retrieving info from wiki Recuperando información de wiki - + GitPython not found. Using standard download instead. GitPython no encontrado. Utilizando descarga estándar en su lugar. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Su versión de python no parece ser compatible con archivos ZIP. No es posible proceder. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. El entorno de trabajo se ha instalado correctamente. Reinicie FreeCAD para aplicar los cambios. - + Missing workbench Falta el entorno de trabajo - + Missing python module Falta módulo python - + Missing optional python module (doesn't prevent installing) Falta módulo opcional de python (no impide la instalación) - + Some errors were found that prevent to install this workbench Se han encontrado algunos errores que impiden instalar este entorno de trabajo - + Please install the missing components first. Por favor, instale los componentes que faltan primero. - + Error: Unable to download Error: No se puede descargar - + Successfully installed Se ha instalado correctamente - + GitPython not installed! Cannot retrieve macros from git ¡GitPython no instalado! No se pueden recuperar macros desde git @@ -207,72 +207,72 @@ Es necesario reiniciar - + This macro is already installed. Esta macro ya está instalada. - + A macro has been installed and is available under Macro -> Macros menu Una macro ha sido instalada y está disponible en el menú Macro -> Macros - + This addon is marked as obsolete Este complemento está marcado como obsoleto - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Esto generalmente significa que ya no está mantenido, y algún complemento más avanzado en esta lista proporciona la misma funcionalidad. - + Error: Unable to locate zip from Error: No se puede localizar zip desde - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Algo salió mal con la recuperación de instrucciones de Git, posiblemente el ejecutable de Git no está en la ruta - + This addon is marked as Python 2 Only Este complemento está marcado solo con Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Este banco de trabajo ya no se mantiene, instalarlo en un sistema con Python 3 probablemente provocará errores al ejecutarse o utilizarse. - + User requested updating a Python 2 workbench on a system running Python 3 - El usuario solicita actualizar un banco de trabajo con Python 2 en un sistema que ejecuta Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Banco de trabajo actualizado con éxito. Reinicie FreeCAD para aplicar los cambios. - + User requested installing a Python 2 workbench on a system running Python 3 - El usuario solicita instalar un banco de trabajo Python 2 en un sistema que ejecuta Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Parece ser un problema al conectarse a la Wiki, por lo tanto no puede recuperar la lista de macros del Wiki en este momento - + Raw markdown displayed Markdown sin procesar mostrado - + Python Markdown library is missing. Falta la biblioteca Python Markdown. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts index 299522de87..17e644b8cf 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_eu.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Instalatutako kokapena @@ -87,107 +87,107 @@ Makroa ezin izan da kendu. - + Unable to download addon list. Ezin izan da gehigarrien zerrenda deskargatu. - + Workbenches list was updated. Lan-mahaien zerrenda eguneratu da. - + Outdated GitPython detected, consider upgrading with pip. GitPython zaharkitua detektatu da, eguneratu ezazu pip bidez. - + List of macros successfully retrieved. Makroen zerrenda ongi atzitu da. - + Retrieving description... Deskribapena atzitzen... - + Retrieving info from Informazioa berreskuratzen hemendik - + An update is available for this addon. Eguneraketa bat eskuragarri dago gehigarri honetarako. - + This addon is already installed. Gehigarri hau instalatuta dago. - + Retrieving info from git Informazioa atzitzen git biltegitik - + Retrieving info from wiki Informazioa atzitzen wikitik - + GitPython not found. Using standard download instead. GitPython ez da aurkitu. Deskarga estandarra erabiltzen. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Badirudi zure Python bertsioak ez duela ZIP fitxategirik onartzen. Ezin da jarraitu. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Lan-mahaia ongi instalatu da. Berrabiarazi FreeCAD aldaketak aplikatzeko. - + Missing workbench Lan-mahaia falta da - + Missing python module Python modulua falta da - + Missing optional python module (doesn't prevent installing) Aukerako Python modulua falta da (ez du instalazioa eragozten) - + Some errors were found that prevent to install this workbench Lan-mahai hau instalatzea eragozten duten zenbait errore aurkitu dira - + Please install the missing components first. Instalatu falta diren osagaiak. - + Error: Unable to download Errorea: Ezin da deskargatu - + Successfully installed Ongi instalatu da - + GitPython not installed! Cannot retrieve macros from git GitPython ez dago instalatuta! Ezin dira makroak atzitu git biltegitik @@ -207,72 +207,72 @@ Berrabiaraztea beharrezkoa da - + This macro is already installed. Makro hau instalatuta dago. - + A macro has been installed and is available under Macro -> Macros menu Makro bat instalatu da eta 'Makroa -> Makroak' menuan erabilgarri dago - + This addon is marked as obsolete Gehigarri hau zaharkituta dago - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Horrek esan nahi du ez dela mantentzen eta zerrenda honetako gehigarri aurreratuagoren batek funtzionaltasun bera eskaintzen duela. - + Error: Unable to locate zip from Errorea: Ezin izan da ZIP fitxategia aurkitu - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Zerbait gaizki atera da Git makroak atzitzean, ziur aski Git exekutagarria ez dago bidean - + This addon is marked as Python 2 Only Gehigarri hau Python 2 bertsiorako soilik da - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Lan-mahai honek beharbada ez du jadanik mantenimendurik eta Python 3 duen sistema batean instalatzen bada erroreak sortu ditzake bai abioan bai erabiltzen ari denean. - + User requested updating a Python 2 workbench on a system running Python 3 - Erabiltzaileak Python 2 lan-mahai bat eguneratzea eskatu du Python 3 duen sistema batean - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Lan-mahaia ongi eguneratu da. Berrabiarazi FreeCAD aldaketak aplikatzeko. - + User requested installing a Python 2 workbench on a system running Python 3 - Erabiltzaileak Python 2 lan-mahai bat instalatzea eskatu du Python 3 duen sistema batean - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Badirudi arazo bat dagoela wikiarekin konektatzean, ezin da atzitu wikiko makroen zerrenda momentu honetan - + Raw markdown displayed Markdown gordina bistaratzen ari da. - + Python Markdown library is missing. Python Markdown liburutegia falta da. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts index 7eafb5f7a5..0ae0ca3c6a 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fi.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Asennettu sijainti @@ -87,107 +87,107 @@ Makroa ei voitu poistaa. - + Unable to download addon list. Lisäosien luetteloa ei voida ladata. - + Workbenches list was updated. Työpöytien luettelo on päivitetty. - + Outdated GitPython detected, consider upgrading with pip. Vanhentunut GitPython havaittu, harkitse päivitystä pip: n kanssa. - + List of macros successfully retrieved. Luettelo makroista noudettu. - + Retrieving description... Haetaan kuvausta... - + Retrieving info from Haetaan tietoja - + An update is available for this addon. Päivitys on saatavilla tälle lisäosalle. - + This addon is already installed. Tämä lisäosa on jo asennettu. - + Retrieving info from git Haetaan tietoja git: stä - + Retrieving info from wiki Haetaan tietoja wikistä - + GitPython not found. Using standard download instead. GitPythonia ei löytynyt. Käytetään sen sijaan standardilatausta. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Sinun versiota pythonista ei ' löydy tukeakseen ZIP tiedostoja. Ei voida edetä. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Työpöytä asennettu onnistuneesti. Käynnistä FreeCAD uudelleen ottaaksesi muutokset käyttöön. - + Missing workbench Työpöytä puuttuu - + Missing python module Python moduuli puuttuu - + Missing optional python module (doesn't prevent installing) Valinnainen python-moduuli puuttuu (se ' estää asennuksen) - + Some errors were found that prevent to install this workbench Joitakin virheitä havaittiin, mikä estää tämän työpöydän asentamisen - + Please install the missing components first. Asenna ensin puuttuvat komponentit. - + Error: Unable to download Virhe: Lataaminen epäonnistui - + Successfully installed Asennettu onnistuneesti - + GitPython not installed! Cannot retrieve macros from git GitPythonia ei ole asennettu! Makroja ei voi noutaa git: stä @@ -207,72 +207,72 @@ Uudelleenkäynnistys vaaditaan - + This macro is already installed. Tämä makro on jo asennettu. - + A macro has been installed and is available under Macro -> Macros menu Makro on asennettu ja se on saatavilla makro -> Makro -valikosta - + This addon is marked as obsolete Tämä lisäosa on merkitty vanhentuneeksi - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Tämä tarkoittaa yleensä sitä, että sitä ei enää ylläpidetä ja että tässä luettelossa on edistyneempiä lisäosia, mitkä tekevät saman toiminnallisuuden. - + Error: Unable to locate zip from Virhe: Zip -tiedostoa ei voitu paikantaa - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Jotain meni pieleen Git Makron noutamisessa, ehkä Git-ohjelma ei ole polulla - + This addon is marked as Python 2 Only Tämä lisäosa on merkitty vain Python 2: lle - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Tätä työpöytää ei voida enää ylläpitää ja sen asentaminen Python 3 -järjestelmään johtaa todennäköisemmin virheisiin käynnistyksessä tai käytön aikana. - + User requested updating a Python 2 workbench on a system running Python 3 - Käyttäjä pyysi Python 2 -työpöydän päivittämistä Python 3 -järjestelmään - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Työpöytä asennettu onnistuneesti. Käynnistä FreeCAD uudelleen ottaaksesi muutokset käyttöön. - + User requested installing a Python 2 workbench on a system running Python 3 - Käyttäjä pyysi Python 2 -työpöydän asentamista Python 3 -järjestelmässä - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Näyttää siltä, että kyseessä on Wikiin yhdistämiseen liittyvä ongelma, joten Wiki makro -listaa ei voida hakea tällä hetkellä - + Raw markdown displayed Raw Markdown (muokkaamaton) näytetään - + Python Markdown library is missing. Python Markdown kirjasto puuttuu. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts index 5770f2137b..7d2306617d 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fil.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -87,107 +87,107 @@ Macro could not be removed. - + Unable to download addon list. Unable to download addon list. - + Workbenches list was updated. Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git @@ -207,72 +207,72 @@ Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts index fbe7c0b8ef..cb91bcb3b0 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_fr.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Emplacement installé @@ -87,107 +87,107 @@ La macro n'a pas pu être désinstallée. - + Unable to download addon list. Impossible de télécharger la liste des greffons. - + Workbenches list was updated. La liste des ateliers a été mise à jour. - + Outdated GitPython detected, consider upgrading with pip. La version de GitPython est obsolète, envisagez de mettre à jour avec pip. - + List of macros successfully retrieved. Liste des macros récupérée avec succès. - + Retrieving description... Récupération de la description... - + Retrieving info from Récupération des informations de - + An update is available for this addon. Une mise à jour est disponible pour ce greffon. - + This addon is already installed. Ce greffon est déjà installé. - + Retrieving info from git Récupération des informations depuis git - + Retrieving info from wiki Récupération des informations depuis le wiki - + GitPython not found. Using standard download instead. GitPython est introuvable. Utilisation du téléchargement standard. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Votre version de Python semble ne pas supporter les fichiers ZIP. Impossible de continuer. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Atelier installé avec succès. Veuillez redémarrer FreeCAD pour appliquer les modifications. - + Missing workbench Atelier manquant - + Missing python module Module Python manquant - + Missing optional python module (doesn't prevent installing) Un module Python optionnel est manquant (mais n'empêche pas l'installation) - + Some errors were found that prevent to install this workbench Des erreurs sont survenues et empêchent l'installation de cet atelier - + Please install the missing components first. Veuillez d'abord installer les composants manquants. - + Error: Unable to download Erreur : impossible de télécharger - + Successfully installed Installation réussie - + GitPython not installed! Cannot retrieve macros from git GitPython n'est pas installé. Impossible de récupérer les macros depuis git @@ -207,72 +207,72 @@ Redémarrage requis - + This macro is already installed. Cette macro est déjà installée. - + A macro has been installed and is available under Macro -> Macros menu Une macro a été installée et est disponible dans le menu Macro -> Macros - + This addon is marked as obsolete Ce greffon est marqué comme obsolète - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Cela signifie généralement qu'il n'est plus maintenu, et que d'autres greffons plus perfectionnés proposant les mêmes fonctionnalités sont disponibles. - + Error: Unable to locate zip from Erreur: Impossible de localiser le zip de - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Une erreur s'est produite lors de la Récupération de Macro Git, peut-être que l'exécutable Git n'est pas dans le chemin d'accès - + This addon is marked as Python 2 Only Cet addon est indiqué pour Python 2 uniquement - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Cet atelier peut ne plus être maintenu et l'installer sur un système Python 3 entraînera très probablement des erreurs au démarrage ou en cours d'utilisation. - + User requested updating a Python 2 workbench on a system running Python 3 - L'utilisateur a demandé la mise à jour d'un atelier Python 2 sur un système Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Atelier mis à jour avec succès. Veuillez redémarrer FreeCAD pour appliquer les modifications. - + User requested installing a Python 2 workbench on a system running Python 3 - L'utilisateur a demandé l'installation d'un atelier Python 2 sur un système exécutant Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Il semble y avoir un problème de connexion au Wiki, la liste des macros du Wiki ne peut donc pas être récupérée pour le moment - + Raw markdown displayed Affichage du Markdown brut - + Python Markdown library is missing. La bibliothèque Python Markdown est manquante. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts index 9f413c6a1e..d183a9c23f 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_gl.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Localización da instalación @@ -87,107 +87,107 @@ Non se puido eliminar a macro. - + Unable to download addon list. Non se pode descargar a lista de complementos. - + Workbenches list was updated. A lista de bancos de traballo foi actualizada. - + Outdated GitPython detected, consider upgrading with pip. Detectado GitPython caducado, considera actualizar con pip. - + List of macros successfully retrieved. Lista de macros recuperada con éxito. - + Retrieving description... Recuperando descrición... - + Retrieving info from Recuperando información dende - + An update is available for this addon. Unha actualización está dispoñible para este engadido. - + This addon is already installed. Este engadido xa está instalado. - + Retrieving info from git Recuperando información dende git - + Retrieving info from wiki Recuperando información dende wiki - + GitPython not found. Using standard download instead. GitPython non atopado. Utilizando descarga estándard no seu lugar. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. A túa versión de python non parece ser compatible con ficheiros ZIP. Non é posible proceder. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. O banco de traballo instalado correctamente. Fai o favor de reiniciar FreeCAD para aplicar os trocos. - + Missing workbench Perdido banco de traballo - + Missing python module Perdido módulo python - + Missing optional python module (doesn't prevent installing) Módulo python opcional perdido (non impide a instalación) - + Some errors were found that prevent to install this workbench Algúns erros atopados que impiden instalar este banco de traballo - + Please install the missing components first. Fai o favor de instalar os compoñentes que falta primeiro. - + Error: Unable to download Erro: A descarga non vai - + Successfully installed Instalado con éxito - + GitPython not installed! Cannot retrieve macros from git GitPyton non instalado! Non se pode recuperar macros dende o git @@ -207,72 +207,72 @@ Require reinicio - + This macro is already installed. Esta macro xa está instalada. - + A macro has been installed and is available under Macro -> Macros menu Unha macro foi instalada e está dispoñible baixo o menú Macros Macro -> - + This addon is marked as obsolete Este complemento está marcado como obsoleto - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Esto xeralmente significa que xa non é mantido, e algún complemento máis avanzado nesta lista provén a mesma funcionalidade. - + Error: Unable to locate zip from Erro: non se puido localizar o zip dende - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Algo saíu mal coa recuperación de macros de Git, posiblemente o executable de Git non está na ruta - + This addon is marked as Python 2 Only Este complemento está marcado soamente como Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Este banco de traballo xa non se mantén e instalalo nun sistema con Python 3 probablemente provoque erros ó iniciarse ou ó usarse. - + User requested updating a Python 2 workbench on a system running Python 3 - O usuario solicitou actualizar un banco de traballo en Python 2 nun sistema que executa Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. O banco de traballo actualizouse correctamente. Reinicie FreeCAD para aplicar os cambios. - + User requested installing a Python 2 workbench on a system running Python 3 - O usuario solicitou instalar un banco de traballo en Python 2 nun sistema que executa Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Parece que hai un problema ó conectarse á Wiki, polo tanto non se pode recuperar a lista de macros da Wiki neste momento - + Raw markdown displayed Mostrando Markdown sen procesar - + Python Markdown library is missing. Falta a biblioteca Markdown de Python. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts index beac264f82..1f0afbd370 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_hr.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Mjesto instaliranja @@ -87,107 +87,107 @@ Nije moguće ukloniti Makro. - + Unable to download addon list. Nije moguće preuzeti popis dodataka. - + Workbenches list was updated. Popis radnih površina je ažuriran. - + Outdated GitPython detected, consider upgrading with pip. Otkriven je zastarjeli GitPython, razmislite o nadogradnji s pip. - + List of macros successfully retrieved. Popis makronaredbi uspješno je dohvaćen. - + Retrieving description... Dohvaćanje opisa... - + Retrieving info from Dohvaćanje informacije od - + An update is available for this addon. Dostupno ažuriranje za ovaj dodatak. - + This addon is already installed. Ovaj dodatak je već instaliran. - + Retrieving info from git Dohvaćanje informacije od git - + Retrieving info from wiki Dohvaćanje informacije od wiki-a - + GitPython not found. Using standard download instead. GitPython nije pronađen. Upotreba standardnog preuzimanja. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Vaša verzija python-a ne podržava ZIP datoteke. Nije moguće nastaviti. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Radna površina je uspješno instalirana. Ponovo pokrenite FreeCAD da biste primijenili promjene. - + Missing workbench Nedostaje radna površina - + Missing python module Nedostaje python modul - + Missing optional python module (doesn't prevent installing) Nedostaje neobvezan python modul (neće se spriječiti instalacija) - + Some errors were found that prevent to install this workbench Pronađene su neke pogreške koje sprečavaju instalaciju ove radne površine - + Please install the missing components first. Prvo instalirajte nedostajuće dijelove. - + Error: Unable to download Greška: Ne mogu preuzeti - + Successfully installed Uspješno instaliran - + GitPython not installed! Cannot retrieve macros from git GitPython se nije instalirao! Ne mogu se dohvatiti makronaredbe iz git-a @@ -207,78 +207,78 @@ Potrebno je ponovo pokretanje - + This macro is already installed. Ova makronaredba je već instalirana. - + A macro has been installed and is available under Macro -> Macros menu Makronaredba je instalirana i dostupna je pod Makro -> Makros-Izborniku - + This addon is marked as obsolete Ovaj dodatak je označen kao zastario - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. To obično znači da se više ne održava, a neki napredniji dodatak na ovom popisu pruža istu funkciju. - + Error: Unable to locate zip from Greška: Nije moguće locirati zip od - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Nešto je pošlo po zlu s dohvaćanjem Git Macro-a, možda Git izvršni program nije u poveznici - + This addon is marked as Python 2 Only Taj je dodatak označen samo za Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Ova radna ploča se više ne može održavati i instaliranje na Python 3 sustav vjerojatno će rezultirati pogreškama pri pokretanju ili tijekom upotrebe. - + User requested updating a Python 2 workbench on a system running Python 3 - Korisnik je zatražio ažuriranje radne površine Python 2 na sustavu koji pokreće Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench je uspješno ažuriran. Ponovo pokrenite FreeCAD da biste primijenili promjene. - + User requested installing a Python 2 workbench on a system running Python 3 - Korisnik je zatražio instaliranje radne stanice Python 2 na sustav koji radi s Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Čini se da je problem povezivanje s Wiki-em, stoga trenutačno ne može dohvatiti popis makronaredbi Wiki-a - + Raw markdown displayed Prikazan čisti markdown kod - + Python Markdown library is missing. Nedostaje Python Markdown biblioteka. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts index 961299d5fc..847cd9ffa2 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_hu.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Telepített hely @@ -87,107 +87,107 @@ Makró eltávolítása sikertelen. - + Unable to download addon list. A kiegészítő letöltése sikertelen. - + Workbenches list was updated. A munkafelületek listája frissítve. - + Outdated GitPython detected, consider upgrading with pip. Elavult GitPython észlelve, fontolja meg a frissítés a pip-el. - + List of macros successfully retrieved. A sikeresen beolvasott makrók listája. - + Retrieving description... Leírások lekérdezése... - + Retrieving info from Információ beolvasása ettől - + An update is available for this addon. Ehhez a kiegészítőhöz egy frissítés érhető el. - + This addon is already installed. Ez a kiegészítő már telepítve van. - + Retrieving info from git Információ beolvasása git-ből - + Retrieving info from wiki Információ beolvasása wiki-ből - + GitPython not found. Using standard download instead. GitPython nem található. Szokásos letöltési hely használata. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. A Python verziója úgy tűnik, nem támogatja a zip fájlokat. Nem folytatható. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Munkafelület sikeresen telepítve. A változtatások alkalmazásához indítsa újra a FreeCAD programot. - + Missing workbench Hiányzó munkafelület - + Missing python module Hiányzó python modul - + Missing optional python module (doesn't prevent installing) Hiányzó kiegészítő python modul (nem állítja meg a telepítése) - + Some errors were found that prevent to install this workbench Néhány hibát talált, amely megakadályozza, hogy telepítse ezt a munkafelületet - + Please install the missing components first. Kérem először telepítse a hiányzó összetevőket. - + Error: Unable to download Hiba: Nem lehet letölteni - + Successfully installed Sikeresen telepítve - + GitPython not installed! Cannot retrieve macros from git GitPython nincs telepítve! Nem olvashatók be a makrók a git-ből @@ -207,72 +207,72 @@ Újraindítás szükséges - + This macro is already installed. Ez a makró már telepítve van. - + A macro has been installed and is available under Macro -> Macros menu A makró telepítve van, és elérhető a Makró -> Makrók menüben - + This addon is marked as obsolete Ez a bővítmény elavultként jelölt - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Ez általában azt jelenti, hogy már nem tartják karban, és a lista néhány fejlettebb bővítménye ugyanazokat a funkciókat nyújtja. - + Error: Unable to locate zip from Hiba: Nem található a zip formátum - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Valami elromlott a Git makró visszakeresésnél, esetleg a futtatható Git nincs az elérési úton - + This addon is marked as Python 2 Only Ez a bővítmény csak Python 2-ként van megjelölve - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Előfordulhat, hogy ez a munkafelület már nem karbantartható, és a Python 3 rendszerre való telepítése több mint valószínű, hogy hibákat fog eredményezni indításkor vagy használat közben. - + User requested updating a Python 2 workbench on a system running Python 3 - A felhasználó egy Python 2 munkaterület frissítését kérte egy Python 3-at futtató rendszeren - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. A munkaterület frissítése sikeresen megtörtént. A módosítások alkalmazásához indítsa újra a FreeCAD programot. - + User requested installing a Python 2 workbench on a system running Python 3 - A felhasználó python 2 munkafelület telepítését kérte egy Python 3-at futtató rendszeren - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Úgy tűnik, hogy a wikihez való kapcsolódási probléma, ezért jelenleg nem lehet beolvasni a Wiki makrólistát - + Raw markdown displayed Nyers leíró megjelenítése - + Python Markdown library is missing. Python leíró könyvtár hiányzik. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts index 5705b34f3f..6869dcc697 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_id.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Lokasi pemasangan @@ -87,107 +87,107 @@ Makro tidak dapat dihapus. - + Unable to download addon list. Tidak dapat mengunduh daftar addon. - + Workbenches list was updated. Daftar meja kerja sudah diperbarui. - + Outdated GitPython detected, consider upgrading with pip. GitPython yang kedaluwarsa terdeteksi, pertimbangkan untuk meningkatkan dengan pip. - + List of macros successfully retrieved. Daftar makro berhasil diambil. - + Retrieving description... Mengambil deskripsi... - + Retrieving info from Mengambil info dari - + An update is available for this addon. Pembaruan tersedia untuk addon ini. - + This addon is already installed. Addon ini sudah diinstal. - + Retrieving info from git Mengambil info dari git - + Retrieving info from wiki Mengambil info dari wiki - + GitPython not found. Using standard download instead. GitPython tidak ditemukan. Sebaliknya, gunakan unduhan standar. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Versi python Anda tampaknya tidak mendukung file ZIP. Tidak dapat melanjutkan. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Meja kerja berhasil diinstal. Silakan mulai kembali FreeCAD untuk menerapkan perubahan. - + Missing workbench Meja kerja tidak ada - + Missing python module Modul python tidak ada - + Missing optional python module (doesn't prevent installing) Modul python opsional tidak ada (tidak mencegah penginstalan) - + Some errors were found that prevent to install this workbench Beberapa kesalahan ditemukan yang mencegah untuk menginstal meja kerja ini - + Please install the missing components first. Silakan instal komponen yang hilang terlebih dahulu. - + Error: Unable to download Kesalahan: Tidak dapat mengunduh - + Successfully installed Berhasil diinstal - + GitPython not installed! Cannot retrieve macros from git GitPython tidak diinstal! Tidak dapat mengambil makro dari git @@ -207,72 +207,72 @@ Mulai ulang diperlukan - + This macro is already installed. Makro ini sudah diinstal. - + A macro has been installed and is available under Macro -> Macros menu Sebuah makro sudah diinstal dan tersedia di bawah menu Makro -> Makro - + This addon is marked as obsolete Addon ini ditandai sebagai usang - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Addon ini biasanya tidak lagi dipertahankan dan beberapa addon lebih canggih di daftar ini menyediakan fungsionalitas yang sama. - + Error: Unable to locate zip from Kesalahan: Tidak dapat menemukan zip dari - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Meja kerja ini tidak lagi diurus dan memasangnya pada sistem Python 3 mungkin akan lebih sering menyebabkan galat saat memulai atau saat menggunakan. - + User requested updating a Python 2 workbench on a system running Python 3 - Pengguna minta memperbaharui meja kerja Python 2 di sistem yang menjalankan Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Meja kerja berhasil diperbaharui. Tolong mulai ulang FreeCAD untuk menerapkan perubahan. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts index 65a65f63aa..75f6854311 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_it.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Percorso di installazione @@ -87,107 +87,107 @@ Impossibile rimuovere la macro. - + Unable to download addon list. Impossibile scaricare la lista degli addon. - + Workbenches list was updated. Elenco degli ambienti di lavoro aggiornato. - + Outdated GitPython detected, consider upgrading with pip. Rilevato GitPython obsoleto, considerare di aggiornarlo con pip. - + List of macros successfully retrieved. Lista delle macro recuperata con successo. - + Retrieving description... Recupero descrizione... - + Retrieving info from Recupero informazioni da - + An update is available for this addon. Per questo addon è disponibile un aggiornamento. - + This addon is already installed. Questo addon è già installato. - + Retrieving info from git Recupero informazioni da git - + Retrieving info from wiki Recupero informazioni dal wiki - + GitPython not found. Using standard download instead. GitPython non trovato. In sostituzione, usare il download standard. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Sembra che la versione di python non supporti i file ZIP. Impossibile procedere. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Ambiente di lavoro installato correttamente. Riavviare FreeCAD per applicare le modifiche. - + Missing workbench Ambiente di lavoro mancante - + Missing python module Modulo python mancante - + Missing optional python module (doesn't prevent installing) Modulo Python opzionale mancante (ma non impedisce l'installazione) - + Some errors were found that prevent to install this workbench Sono stati trovati alcuni errori che impediscono di installare questo ambiente di lavoro - + Please install the missing components first. Si prega di installare prima i componenti mancanti. - + Error: Unable to download Errore: download impossibile - + Successfully installed Installazione riuscita - + GitPython not installed! Cannot retrieve macros from git GitPython non installato! Impossibile recuperare la macro da git @@ -207,72 +207,72 @@ Riavvio richiesto - + This macro is already installed. Questa macro è già installata. - + A macro has been installed and is available under Macro -> Macros menu Una macro è stata installata ed è disponibile sotto Macro -> menu Macros - + This addon is marked as obsolete Questo addon è contrassegnato come obsoleto - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Questo di solito significa che non è più mantenuto e alcuni addon in questa lista forniscono la stessa funzionalità. - + Error: Unable to locate zip from Errore: Impossibile individuare zip da - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Qualcosa è andato storto con il recupero della macro da Git, forse l'eseguibile Git non è nel percorso - + This addon is marked as Python 2 Only Questo componente aggiuntivo è contrassegnato come solo con Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Questo ambiente potrebbe non essere più mantenuto e installarlo su un sistema Python 3 causerà probabilmente errori all'avvio o durante l'uso. - + User requested updating a Python 2 workbench on a system running Python 3 - L'utente ha richiesto l'aggiornamento di un ambiente di lavoro in Python 2 su un sistema che esegue Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Ambiente di lavoro aggiornato correttamente. Riavviare FreeCAD per applicare le modifiche. - + User requested installing a Python 2 workbench on a system running Python 3 - L'utente ha richiesto l'installazione di un ambiente di lavoro in Python 2 su un sistema che esegue Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Sembra esserci un problema di connessione al Wiki, quindi in questo momento non è possibile recuperare l'elenco delle macro - + Raw markdown displayed Visualizza il sorgente Markdown - + Python Markdown library is missing. Manca la libreria Python Markdown. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts index cf0207be3a..8a4b1be918 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ja.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location インストール場所 @@ -87,107 +87,107 @@ マクロを削除できませんでした - + Unable to download addon list. アドオンの一覧をダウンロードできませんでした。 - + Workbenches list was updated. ワークベンチの一覧を更新しました。 - + Outdated GitPython detected, consider upgrading with pip. 古い GitPython が見つかりました。pip によるアップグレードを検討してください。 - + List of macros successfully retrieved. マクロの一覧を取り込むことに成功しました。 - + Retrieving description... 説明の取り込み中 - + Retrieving info from 情報を取り込み中 - + An update is available for this addon. このアドオンでアップデートが利用可能です。 - + This addon is already installed. このアドオンは既にインストールされています。 - + Retrieving info from git Gitからの情報を取り込み中 - + Retrieving info from wiki Wikiからの情報を取得しています - + GitPython not found. Using standard download instead. GitPythonが見つかりません。代わりに標準のダウンロードを使用しています。 - + Your version of python doesn't appear to support ZIP files. Unable to proceed. 利用しているPythonのバージョンではZIPファイルをサポートしていないようです。ゆえに続行できません。 - + Workbench successfully installed. Please restart FreeCAD to apply the changes. ワークベンチのインストールが成功しました。 FreeCADを再起動して変更を有効にしてください。 - + Missing workbench ワークベンチが見当たりません - + Missing python module Pythonが見当たりません - + Missing optional python module (doesn't prevent installing) オプションのPythonモジュールが見つかりません(インストールは停止されません) - + Some errors were found that prevent to install this workbench エラーが発生したためこのワークベンチをインストールすることができません - + Please install the missing components first. 先ずは、見当たらないコンポーネントをインストールしてください。 - + Error: Unable to download エラー: ダウンロードできませんでした - + Successfully installed インストールが完了しました - + GitPython not installed! Cannot retrieve macros from git GitPythonがインストールされていませんでした！よってマクロをgitより取り戻すことができません @@ -207,72 +207,72 @@ 再起動が必要です - + This macro is already installed. このマクロは既にインストールされています。 - + A macro has been installed and is available under Macro -> Macros menu マクロがインストールされました。メニューのマクロ -> マクロから利用できます。 - + This addon is marked as obsolete このアドオンは非推奨に設定されています - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. 通常はすでにメンテナンスがされていないことを意味します。このリストにあるさらに高度なアドオンが同じ機能を提供している場合があります。 - + Error: Unable to locate zip from エラー: ZIP ファイルを以下から配置できません。 - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Git マクロの取得に問題が発生しました。おそらく Git 実行ファイルがパス中にありません。 - + This addon is marked as Python 2 Only このアドオンは Python 2 専用として記されています - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. このワークベンチは保守されておらず、Python 3 システムにインストールすると起動時や使用中にエラーが発生する可能性が高くなります。 - + User requested updating a Python 2 workbench on a system running Python 3 - ユーザーが Python 3 を実行しているシステムで Python 2 用ワークベンチの更新を要求しました - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. ワークベンチの更新が成功しました。 FreeCADを再起動して変更を有効にしてください。 - + User requested installing a Python 2 workbench on a system running Python 3 - ユーザーが Python 3 を実行しているシステムで Python 2 用ワークベンチのインストールを要求しました - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Wikiへの接続で問題が発生したため、現時点ではWikiのマクロリストを取得できません。 - + Raw markdown displayed 未加工のマークダウンを表示 - + Python Markdown library is missing. Python Markdown ライブラリがありません。 diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_kab.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_kab.ts index a577ad95de..d6c5643ee8 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_kab.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_kab.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -87,107 +87,107 @@ Macro could not be removed. - + Unable to download addon list. Unable to download addon list. - + Workbenches list was updated. Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git @@ -207,72 +207,72 @@ Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts index d6fb7331d5..c950d14071 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ko.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -87,107 +87,107 @@ 매크로를 제거할 수 없습니다. - + Unable to download addon list. Unable to download addon list. - + Workbenches list was updated. 작업대 목록이 갱신되었습니다. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. 이 추가기능을 업데이트 할 수 있습니다. - + This addon is already installed. 이 추가기능은 이미 설치되어 있습니다. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. 설치완료.새로 추가한 작업대를 사용하려면 FreeCAD를 다시 시작하세요. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download 오류: 내려받을 수 없음 - + Successfully installed 설치 완료 - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git @@ -207,72 +207,72 @@ 다시 시작 필요 - + This macro is already installed. 이 매크로는 이미 설치되어 있습니다. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts index e5be12b619..65cd8037cc 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_lt.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -87,107 +87,107 @@ Macro could not be removed. - + Unable to download addon list. Unable to download addon list. - + Workbenches list was updated. Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Error: Unable to download - + Successfully installed Successfully installed - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git @@ -207,72 +207,72 @@ Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts index 9c95bf0a5c..9365fcb89d 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_nl.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Geïnstalleerde locatie @@ -87,107 +87,107 @@ Macro kon niet worden verwijderd. - + Unable to download addon list. Addon lijst kan niet worden opgehaald. - + Workbenches list was updated. Werkbankenlijst is bijgewerkt. - + Outdated GitPython detected, consider upgrading with pip. Verouderde GitPython gevonden, overweeg een upgrade met pip. - + List of macros successfully retrieved. Lijst van macro's succesvol opgehaald. - + Retrieving description... Omschrijving ophalen... - + Retrieving info from Informatie ophalen vanaf - + An update is available for this addon. Er is een update beschikbaar voor deze addon. - + This addon is already installed. Deze addon is al geïnstalleerd. - + Retrieving info from git Informatie ophalen van git - + Retrieving info from wiki Informatie ophalen van wiki - + GitPython not found. Using standard download instead. GitPython niet gevonden. Standaard download wordt nu gebruikt. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Je versie van Python lijkt geen ZIP-bestanden te ondersteunen. Verder gaan niet mogelijk. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Werkbank succesvol geïnstalleerd. Herstart FreeCAD om de wijzigingen toe te passen. - + Missing workbench Werkbank ontbreekt - + Missing python module Ontbrekende python module - + Missing optional python module (doesn't prevent installing) Ontbrekende optionele python module (voorkomt niet het installeren) - + Some errors were found that prevent to install this workbench Er zijn enkele fouten gevonden die voorkomen dat deze werkbank wordt geïnstalleerd - + Please install the missing components first. Installeer eerst de ontbrekende componenten. - + Error: Unable to download Fout: Kan niet downloaden - + Successfully installed Succesvol geïnstalleerd - + GitPython not installed! Cannot retrieve macros from git GitPython niet geïnstalleerd! Macro's kunnen niet worden opgehaald van git @@ -207,72 +207,72 @@ Opnieuw opstarten vereist - + This macro is already installed. Deze macro is al geïnstalleerd. - + A macro has been installed and is available under Macro -> Macros menu Een macro is geïnstalleerd en is beschikbaar onder Macro -> Macro' s menu - + This addon is marked as obsolete Deze uitbreiding is gemarkeerd als verouderd - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Dit betekent gewoonlijk dat het niet meer onderhouden wordt, en een geavanceerdere uitbreidingen in deze lijst biedt dezelfde functionaliteit. - + Error: Unable to locate zip from Fout: Kan zip niet vinden vanuit - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Er is iets misgegaan met het ophalen van de Git Macro. Mogelijk bevindt het uitvoerbare Git-bestand zich niet in het pad - + This addon is marked as Python 2 Only Deze toevoeging is alleen geschikt voor Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Deze werkbank wordt wellicht niet langer onderhouden en de installatie ervan op een Python 3-systeem zal hoogstwaarschijnlijk leiden tot fouten bij het opstarten of tijdens het gebruik. - + User requested updating a Python 2 workbench on a system running Python 3 - De gebruiker verzocht om een Python 2 werkbank bij te werken die alleen geschikt is voor Python 3 - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Werkbank succesvol bijgewerkt. Herstart FreeCAD om de wijzigingen toe te passen. - + User requested installing a Python 2 workbench on a system running Python 3 - De gebruiker verzocht om een Python 2 werkbank te installeren op een systeem dat Python 3 draait - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Er lijkt een probleem te zijn met de verbinding met de Wiki, daarom kan de Wiki-macrolijst op dit moment niet worden opgehaald - + Raw markdown displayed Ongeformateerde tekst weergegeven - + Python Markdown library is missing. Python Markdown bibliotheek mist. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_no.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_no.ts index d65ee5a337..6817b726dd 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_no.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_no.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installasjonssted @@ -87,107 +87,107 @@ Makroen kunne ikke fjernes. - + Unable to download addon list. Kunne ikke laste ned liste over tilleggsmoduler. - + Workbenches list was updated. Liste over arbeidsbenker ble oppdatert. - + Outdated GitPython detected, consider upgrading with pip. Utdatert GitPython oppdaget, vurder oppgradering med pip. - + List of macros successfully retrieved. Makroliste hentet. - + Retrieving description... Henter beskrivelse... - + Retrieving info from Henter informasjon fra - + An update is available for this addon. En oppdatering er tilgjengelig for denne tilleggsmodulen. - + This addon is already installed. Denne tilleggsmoduler er allerede installert. - + Retrieving info from git Henter informasjon fra git - + Retrieving info from wiki Henter informasjon fra wiki - + GitPython not found. Using standard download instead. GitPython ble ikke funnet. Bruker standard nedlasting. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Den installerte versjonen av Python støtter ikke ZIP-filer. Kan ikke fortsette. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Arbeidsbenken er installert. Start FreeCAD på nytt for at den skal bli tilgjengelig. - + Missing workbench Arbeidsbenken mangler - + Missing python module Python-modul mangler - + Missing optional python module (doesn't prevent installing) Python-modul mangler (hindrer ikke installering) - + Some errors were found that prevent to install this workbench Noen feil ble funnet som hindrer installering av denne arbeidsbenken - + Please install the missing components first. Vennligst installer manglende komponenter først. - + Error: Unable to download Feil: Kan ikke lastes ned - + Successfully installed Installert - + GitPython not installed! Cannot retrieve macros from git GitPython er ikke installert! Kan ikke hente makroer fra git @@ -207,72 +207,72 @@ Omstart nødvendig - + This macro is already installed. Denne makroen er allerede installert. - + A macro has been installed and is available under Macro -> Macros menu En makro er installert og er tilgjengelig under Makro -> Makroer menyen - + This addon is marked as obsolete Denne tilleggsmodulen er merket utdatert - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Dette betyr vanligvis at den ikke lenger vedlikeholdes og at andre mer avanserte tilleggsmoduler i denne listen gir samme funksjonalitet. - + Error: Unable to locate zip from Feil: Finner ikke zip-filen fra - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Noe gikk galt med Git Macro-nedlastingen, muligens er ikke Git lagt til søkestien - + This addon is marked as Python 2 Only Denne tilleggsmodulen er markert som kun for Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Denne arbeidsbenken vedlikeholdes ikke lenger og vil sannsynligvis gi problemer om den installeres på et system med Python 3. - + User requested updating a Python 2 workbench on a system running Python 3 - Brukeren forsøkte å oppdatere en arbeidsbenk for Python 2 på et system med Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Arbeidsbenken er oppdatert. Start FreeCAD på nytt for å se endringene. - + User requested installing a Python 2 workbench on a system running Python 3 - Brukeren forsøkte å installer en arbeidsbenk for Python 2 på et system med Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Makrolisten fra Wiki kan ikke hentes, sannsynligvis på grunn av et tilkoblingsproblem - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm index 8ac5306d35..1f7cbbedb2 100644 Binary files a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm and b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.qm differ diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts index 56dcb5aa5a..b0f4628f07 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pl.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Miejsce instalacji @@ -59,7 +59,7 @@ Macro successfully installed. The macro is now available from the Macros dialog. - Makro pomyślnie zainstalowane. Makro jest teraz dostępne w oknie dialogowym Makro. + Makro zostało pomyślnie zainstalowane. Jest teraz dostępne w oknie dialogowym Makrodefinicje. @@ -87,107 +87,107 @@ Nie można usunąć makra. - + Unable to download addon list. Nie można pobrać listy dodatków. - + Workbenches list was updated. Lista Środowisk pracy została zaktualizowana. - + Outdated GitPython detected, consider upgrading with pip. Wykryto przestarzały GitPython, rozważ aktualizację za pomocą programu pip. - + List of macros successfully retrieved. Pomyślnie pobrano listę makrodefinicji. - + Retrieving description... Pobieranie opisu... - + Retrieving info from Pobieranie informacji z - + An update is available for this addon. Aktualizacja jest dostępna dla tego dodatku. - + This addon is already installed. Ten dodatek jest już zainstalowany. - + Retrieving info from git Pobieranie informacji z git - + Retrieving info from wiki Pobieranie informacji z Wiki - + GitPython not found. Using standard download instead. Nie znaleziono GitPython. Zamiast tego użyto standardowego pobierania. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Twoja wersja Pythona nie' obsługuje plików ZIP. Nie można kontynuować. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Środowisko pracy zainstalowano pomyślnie. Uruchom ponownie FreeCAD, aby zastosować zmiany. - + Missing workbench Nieistniejące Środowisko pracy - + Missing python module Nieistniejący moduł Pyton - + Missing optional python module (doesn't prevent installing) Brakuje opcjonalnego modułu Python (nie przeszkadza w instalacji) - + Some errors were found that prevent to install this workbench Znaleziono pewne błędy, które uniemożliwiają zainstalowanie tego środowiska - + Please install the missing components first. Proszę najpierw zainstalować brakujące komponenty. - + Error: Unable to download Błąd: Nie można pobrać - + Successfully installed Zainstalowano pomyślnie - + GitPython not installed! Cannot retrieve macros from git GitPython nie jest zainstalowany! Nie można pobrać makrodefinicji z git @@ -207,72 +207,72 @@ Wymagany restart - + This macro is already installed. Moduł jest już zainstalowany. - + A macro has been installed and is available under Macro -> Macros menu Makro zostało zainstalowane i jest dostępne w menu Macrodefinicji -> Menu makrodefinicji - + This addon is marked as obsolete Ten dodatek jest oznaczony jako przestarzały - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Oznacza to, że zazwyczaj nie jest on już utrzymywany, a niektóre bardziej zaawansowane dodatki z tej listy zapewniają tę samą funkcjonalność. - + Error: Unable to locate zip from Błąd: nie można znaleźć pliku Zip z - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Coś poszło nie tak z pobieraniem makr Git, prawdopodobnie plik wykonywalny Git nie występuje w podanej lokalizacjii - + This addon is marked as Python 2 Only Ten dodatek jest oznaczony tylko jako Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Te środowisko pracy nie może być dłużej utrzymywane, a zainstalowanie go w systemie Python 3 z dużym prawdopodobieństwem doprowadzi do błędów podczas uruchamiania lub podczas użytkowania. - + User requested updating a Python 2 workbench on a system running Python 3 - Użytkownik poprosił o zaktualizowanie Środowiska pracy Python 2 w systemie z obsługą Pythona 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Środowisko pracy zaktualizowano pomyślnie. Uruchom ponownie FreeCAD, aby zastosować zmiany. - + User requested installing a Python 2 workbench on a system running Python 3 - Użytkownik poprosił o zainstalowanie Środowiska pracy Python 2 w systemie z obsługą Pythona 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Wygląda na to, że występuje problem z połączeniem się z Wiki, dlatego nie można obecnie pobrać listy makrodefinicji dostępnej na Wiki - + Raw markdown displayed Wyświetlono surowy format markdown - + Python Markdown library is missing. Brakuje biblioteki Markdown środowiska Python. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts index 8d3eaaf35a..a0dfb3f649 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-BR.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Localização instalada @@ -87,107 +87,107 @@ A macro não pode ser removida. - + Unable to download addon list. Incapaz de baixar a list de suplmentos. - + Workbenches list was updated. Lista de workbenches atualizada. - + Outdated GitPython detected, consider upgrading with pip. GitPython desatualizado detectado, considere atualizar com pip. - + List of macros successfully retrieved. Lista de macros obtida com sucesso. - + Retrieving description... Recuperando descrição... - + Retrieving info from Recuperando informações de - + An update is available for this addon. Uma atualização para esta extensão está disponível. - + This addon is already installed. Esta extensão já está instalada. - + Retrieving info from git Recuperando informações do git - + Retrieving info from wiki Recuperando informações da wiki - + GitPython not found. Using standard download instead. GitPython não encontrado. Usando o download padrão em vez disso. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Sua versão do python parece não suportar arquivos ZIP. Não é possível prosseguir. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Bancada de trabalho instalada. Reinicie o FreeCAD para aplicar as alterações. - + Missing workbench Bancada de trabalho não localizada - + Missing python module Modulo Python não localizado - + Missing optional python module (doesn't prevent installing) Faltando módulo python opcional (não impede a instalação) - + Some errors were found that prevent to install this workbench Foram encontrados alguns erros que impedem a instalação desta bancada de trabalho - + Please install the missing components first. Por favor, primeiro instale os componentes faltantes. - + Error: Unable to download Erro: Não foi possível baixar - + Successfully installed Instalado com sucesso - + GitPython not installed! Cannot retrieve macros from git GitPython não instalado! Não é possível recuperar macros do git @@ -207,72 +207,72 @@ Reinicialização necessária - + This macro is already installed. Esta macro já está instalada. - + A macro has been installed and is available under Macro -> Macros menu Uma macro foi instalada e está disponível no menu Macros - + This addon is marked as obsolete Essa extensão está marcada como obsoleta - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Isso geralmente significa que ela não é mais mantida, e outra extensão mais avançada nesta lista fornece a mesma funcionalidade. - + Error: Unable to locate zip from Erro: Não foi possível localizar o zip de - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Algo deu errado com o Git Macro Retrieval, possivelmente o executável Git não está no caminho - + This addon is marked as Python 2 Only Esta extensão é marcada como apenas para Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Esta bancada não pode mais ser mantida e instalá-la em um sistema Python 3 irá mais do que provavelmente resultar em erros na inicialização ou quando em uso. - + User requested updating a Python 2 workbench on a system running Python 3 - O usuário solicitou a atualização de uma bancada de trabalho Python 2 em um sistema que usa Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Bancada atualizada com sucesso. Por favor, reinicie o FreeCAD para aplicar as alterações. - + User requested installing a Python 2 workbench on a system running Python 3 - O usuário solicitou a instalação de uma bancada de trabalho Python 2 em um sistema que usa Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Parece haver um problema conectando ao Wiki, portanto não foi possível recuperar a lista de macros Wiki neste momento - + Raw markdown displayed Marcação bruta exibida - + Python Markdown library is missing. Biblioteca Python Markdown está faltando. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts index 1655611dcf..e25c8bb002 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_pt-PT.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Caminho de instalação @@ -87,107 +87,107 @@ A macro não pode ser removida. - + Unable to download addon list. Incapaz de descarregar a lista de extras. - + Workbenches list was updated. A lista de Bancadas de Trabalho foi atualizada. - + Outdated GitPython detected, consider upgrading with pip. Detetado GitPython desactualizado, considere atualizar com pip. - + List of macros successfully retrieved. Lista de macros atualizada com sucesso. - + Retrieving description... Obtendo descrição... - + Retrieving info from Obtendo informações de - + An update is available for this addon. Uma atualização está disponível para esse extra. - + This addon is already installed. Este extra já está instalado. - + Retrieving info from git Obtendo informações do git - + Retrieving info from wiki Obtendo informações da wiki - + GitPython not found. Using standard download instead. GitPython não foi encontrado. Em vez disso, será usado o descarregamento padrão. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. A sua versão de python parece não suportar ficheiros ZIP. Não é possível prosseguir. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Bancada de trabalho instalada com sucesso. Por favor, reinicie o FreeCAD para aplicar as alterações. - + Missing workbench Bancada de trabalho em falta - + Missing python module Módulo python em falta - + Missing optional python module (doesn't prevent installing) Módulo python opcional em falta (não impede instalação) - + Some errors were found that prevent to install this workbench Foram encontrados erros que impedem a instalação desta bancada de trabalho - + Please install the missing components first. Por favor, instale os componentes em falta primeiro. - + Error: Unable to download Erro: Não foi possível descarregar - + Successfully installed Instalado com sucesso - + GitPython not installed! Cannot retrieve macros from git GitPython não está instalado! Não é possível descarregar macros do git @@ -207,72 +207,72 @@ Reinicio necessário - + This macro is already installed. Esta macro já está instalada. - + A macro has been installed and is available under Macro -> Macros menu Uma macro foi instalada e está disponível no menu Macro -> Macros - + This addon is marked as obsolete Este extra está marcado como obsoleto - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Isto geralmente significa que já não é mantido, e algum extra mais atualizado nesta lista fornece a mesma funcionalidade. - + Error: Unable to locate zip from Erro: Não foi possível localizar o zip de - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Algo correu mal com a descarga da Macro do Git, possivelmente o executável Git não está no caminho especificado - + This addon is marked as Python 2 Only Este complemento é marcado apenas como Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Esta bancada de trabalho não pode mais ser mantida e instalá-la em um sistema Python 3 irá provavelmente resultar em erros no arranque ou quando em uso. - + User requested updating a Python 2 workbench on a system running Python 3 - Utilizador solicitou atualização de uma bancada de trabalho Python 2 num sistema que executa Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Bancada de trabalho atualizada com sucesso. Por favor reinicie o FreeCAD para aplicar as alterações. - + User requested installing a Python 2 workbench on a system running Python 3 - Utilizador solicitou instalação de uma bancada de trabalho Python 2 num sistema que executa Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Parece haver um problema com a ligação à Wiki, portanto neste momento não é possível recuperar a lista Wiki de macros - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Falta biblioteca Python Markdown. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts index e8a42dbd69..37e84a63b8 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ro.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Locația unde s-a efectuat instalarea @@ -87,107 +87,107 @@ Macro nu a putut fi eliminat. - + Unable to download addon list. Imposibil de descărcat lista de adăugări. - + Workbenches list was updated. Lista atelierelor a fost actualizată. - + Outdated GitPython detected, consider upgrading with pip. GitPython vechi detectat, luați în considerare actualizarea cu pip. - + List of macros successfully retrieved. Lista macro-urilor recuperate cu succes. - + Retrieving description... Recuperez descrierea... - + Retrieving info from Preluarea informațiilor de la - + An update is available for this addon. O actualizare este disponibilă pentru acest addon. - + This addon is already installed. Acest addon este deja instalat. - + Retrieving info from git Preluare informații de la git - + Retrieving info from wiki Preluare informații de la wiki - + GitPython not found. Using standard download instead. GitPython nu a fost găsit. Se folosește descarcarea standard în schimb. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Versiunea dumneavoastră de Pyton nu suportă fișierele de tip ZIP. Nu se poate continua. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Ambientul de lucru fost instalat cu succes. Reporniţi FreeCAD pentru a aplica modificările. - + Missing workbench Lipsește ambientul de lucru - + Missing python module Lipsește modulul Python - + Missing optional python module (doesn't prevent installing) Modulul opțional Python lipsește (nu împiedică instalarea) - + Some errors were found that prevent to install this workbench Au fost găsite unele erori care împiedică instalarea ambientului de lucru - + Please install the missing components first. Vă rugăm instalați mai întâi componentele lipsă. - + Error: Unable to download Eroare: Imposibil de descărcat - + Successfully installed Instalat cu succes - + GitPython not installed! Cannot retrieve macros from git GitPython nu este instalat! Nu se pot recupera macro-urile din git @@ -207,72 +207,72 @@ Repornire necesară - + This macro is already installed. Acest macro este deja instalat. - + A macro has been installed and is available under Macro -> Macros menu Un macro a fost instalat și este disponibil sub meniul Macro -> Macros - + This addon is marked as obsolete Acest addon este marcat ca expirat - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. De obicei acest lucru inseamnă că nu mai este menținut, iar unele addon-uri mai avansate oferă aceleași funcții. - + Error: Unable to locate zip from Eroare: Nu se poate localiza zip de la - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Ceva nu a mers bine cu Git Macro Retrieval, probabil executabilul Git nu se află in adresă - + This addon is marked as Python 2 Only Acest supliment este marcat ca Python 2 doar - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Acest ambient de lucru nu mai poate fi întreținut și instalarea sa pe un sistem Python 3 va cauza mai mult decât probabil erori la pornire sau în timpul utilizării. - + User requested updating a Python 2 workbench on a system running Python 3 - Utilizatorul a solicitat actualizarea unui ambient de lucru Python 2 pe un sistem care rulează Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Ambientul de lucru fost instalat cu succes. Reporniţi FreeCAD pentru a aplica modificările. - + User requested installing a Python 2 workbench on a system running Python 3 - Utilizatorul a solicitat actualizarea unui ambient de lucru Python 2 pe un sistem care rulează Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Pare că există o problemă in conectarea la Wiki, prin urmare momentan nu se poate prelua lista de macro Wiki - + Raw markdown displayed Marcaj brut afișat - + Python Markdown library is missing. Lipsește biblioteca Python Markdown. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts index 99c7bd8933..a58e357390 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_ru.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Место установки @@ -87,107 +87,107 @@ Макрос не может быть удален. - + Unable to download addon list. Не удается загрузить список дополнений. - + Workbenches list was updated. Список рабочих окружений обновлен. - + Outdated GitPython detected, consider upgrading with pip. Обнаружен устаревший GitPython, рассмотрите обновление с помощью pip. - + List of macros successfully retrieved. Список макросов успешно получен. - + Retrieving description... Получение описания... - + Retrieving info from Получение информации от - + An update is available for this addon. Для этого дополнения доступно обновление. - + This addon is already installed. Это дополнение уже установлено. - + Retrieving info from git Получение информации из git - + Retrieving info from wiki Получение информации из вики - + GitPython not found. Using standard download instead. GitPython не найден. Вместо этого используется стандартная загрузка. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. По-видимому, ваша версия python не поддерживает ZIP файлы. Продолжение невозможно. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Рабочее окружение успешно установлено. Пожалуйста, перезапустите FreeCAD для применения изменений. - + Missing workbench Отсутствует рабочее окружение - + Missing python module Отсутствует модуль python - + Missing optional python module (doesn't prevent installing) Отсутствует дополнительный модуль python (не запрещает установку) - + Some errors were found that prevent to install this workbench Найдены некоторые ошибки, которые мешают установке этого рабочего окружения - + Please install the missing components first. Сначала установите недостающие компоненты. - + Error: Unable to download Ошибка: Не удалось загрузить - + Successfully installed Успешно установлено - + GitPython not installed! Cannot retrieve macros from git GitPython не установлен! Не удается получить макрос из git @@ -207,72 +207,72 @@ Требуется перезапуск - + This macro is already installed. Этот макрос уже установлен. - + A macro has been installed and is available under Macro -> Macros menu Макрос установлен и доступен меню Макросы -> макрос - + This addon is marked as obsolete Это дополнение помечено как устаревшее - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Это обычно означает, что оно больше не поддерживается, и некоторые более продвинутые дополнения в этом списке обеспечивают те же функции. - + Error: Unable to locate zip from Ошибка: Не удается найти zip из - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Что-то пошло не так при запросе макроса с сайта Git. Возможно исполняемый файл Git не находится в нужном месте - + This addon is marked as Python 2 Only Это дополнение помечено Только для Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Этот верстак больше не может быть поддержан, и установка его на систему с Python 3, вероятно, вызовет ошибки при запуске или во время использования. - + User requested updating a Python 2 workbench on a system running Python 3 - Пользователь запросил обновление рабочего стола Python 2 на системе, запущенной с Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Верстак успешно обновлен. Перезапустите FreeCAD, чтобы применить изменения. - + User requested installing a Python 2 workbench on a system running Python 3 - Пользователь запросил установить верстак для Python 2 на системе Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Возможно, возникла проблема при подключении к Wiki, поэтому в данный момент не удается получить список Wiki-макросов - + Raw markdown displayed Показана исходная разметка - + Python Markdown library is missing. Библиотека Python Markdown отсутствует. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sk.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sk.ts index 9680dcd586..298309fd55 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sk.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sk.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Umiestnenie po inštalácii @@ -87,107 +87,107 @@ Makro sa nepodarilo odstrániť. - + Unable to download addon list. Nie je možné prevziať zoznam doplnkov. - + Workbenches list was updated. Zoznam pracovných priestorov bol aktualizovaný. - + Outdated GitPython detected, consider upgrading with pip. Bola zistená zastaraná knižnica GitPython. Zvážte jej aktualizáciu pomocou programu pip. - + List of macros successfully retrieved. Zoznam makier bol úspešne prijatý. - + Retrieving description... Prijíma sa popis... - + Retrieving info from Prijímajú sa informácie z lokality - + An update is available for this addon. Je dostupná aktualizácia tohto doplnku. - + This addon is already installed. Tento doplnok je už nainštalovaný. - + Retrieving info from git Prijímajú sa informácie z git - + Retrieving info from wiki Prijímajú sa informácie z wiki - + GitPython not found. Using standard download instead. Knižnica GitPython sa nenašla. Použije sa namiesto toho štandardné preberanie. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Zdá sa, že vaša verzia jazyka python nepodporuje súbory ZIP. Nie je možné pokračovať. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Pracovný priestor bol úspešne nainštalovaný. Aby sa prejavili zmeny, prosím, reštartujte aplikáciu FreeCAD. - + Missing workbench Chýba pracovný priestor - + Missing python module Chýba modul jazyka python - + Missing optional python module (doesn't prevent installing) Chýba voliteľný modul jazyka python (inštalácii nebude zabránené) - + Some errors were found that prevent to install this workbench Našli sa nejaké chyby, ktoré zabránili inštalácii tohto pracovného priestoru - + Please install the missing components first. Prosím, najskôr nainštalujte chýbajúce súčasti. - + Error: Unable to download Chyba: Nie je možné prevziať - + Successfully installed Inštalácia úspešná - + GitPython not installed! Cannot retrieve macros from git Knižnica GitPython nie je nainštalovaná! Nedajú sa prijať makrá z git @@ -207,72 +207,72 @@ Vyžadovaný reštart - + This macro is already installed. Toto makro je už nainštalované. - + A macro has been installed and is available under Macro -> Macros menu Makro bolo nainštalované a je dostupné v ponuke Makro -> Makrá - + This addon is marked as obsolete Tento doplnok je označený ako zastaraný - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. To obvykle znamená, že už nie je udržiavaný, a že niektorý pokročilejší doplnok z tohto zoznamu poskytuje rovnaké funkcie. - + Error: Unable to locate zip from Chyba: Nie je možné lokalizovať súbor zip z lokality - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Niekde nastala chyba počas získavania makra zo systému Git, pravdepodobne spustiteľný súbor systému Git nie je v PATH - + This addon is marked as Python 2 Only Tento doplnok je označený ako kompatibilný iba s jazykom Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Tento pracovný priestor nemusí byť už udržiavaný a jeho inštalácia v systéme s jazykom Python verzie 3 bude mať pravdepodobne za následok chyby pri spúšťaní alebo počas používania. - + User requested updating a Python 2 workbench on a system running Python 3 - Používateľ požiadal o aktualizáciu pracovného priestoru jazyka Python 2 v systéme s jazykom Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Pracovný priestor bol úspešne aktualizovaný. Prosím, reštartujte aplikáciu FreeCAD na uplatnenie zmien. - + User requested installing a Python 2 workbench on a system running Python 3 - Používateľ požiadal o inštaláciu pracovného priestoru jazyka Python 2 v systéme s jazykom Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Vypadá byť problém s pripojením na Wiki, preto nie je momentálne možné načítať zoznam makier - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Chýba knižnica Markdown jazyka Python. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts index c969c0e7ba..0d2edb5d04 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sl.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Mesto namestitve @@ -87,107 +87,107 @@ Makra ni bilo mogoče odstraniti. - + Unable to download addon list. Seznama dodatkov ni bilo mogoče prenesti. - + Workbenches list was updated. Seznam delovnih okolij je bil posodobljen. - + Outdated GitPython detected, consider upgrading with pip. Zaznan je zastarel GitPython; razmislite o nadgraditivi s pip-om. - + List of macros successfully retrieved. Seznam makrov uspšno pridobljen. - + Retrieving description... Pridobivanje opisov ... - + Retrieving info from Pridobivanje podatkov iz - + An update is available for this addon. Posodobitev za ta dodatek je na voljo. - + This addon is already installed. Ta dodatek je že nameščen. - + Retrieving info from git Pridobivanje podatkov iz git-a - + Retrieving info from wiki Pridobivanje podatkov iz wiki strani - + GitPython not found. Using standard download instead. GitPython ni mogoče najti. Namesto tega je običajno prenašanje. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Kot kaže, vaša različica Pythona ne podpira datotek ZIP. Ni mogoče nadaljevati. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Delovno okolje uspešno nameščeno. Za uveljavitev sprememb ponovno zaženite FreeCAD. - + Missing workbench Manjkajoče delovno oklje - + Missing python module Manjkajoči Pythonov modul - + Missing optional python module (doesn't prevent installing) Manjkajoči neobvezni Pythonov modul (ne ustavi namestitve) - + Some errors were found that prevent to install this workbench Najdene so bile določene napake, ki preprečujejo namestitev tega delovnega okolja - + Please install the missing components first. Namestite najprej manjkajoče sestavine. - + Error: Unable to download Napaka: Ni mogoče prenesti - + Successfully installed Uspešno nameščeno - + GitPython not installed! Cannot retrieve macros from git GitPython ni nameščen! Makrov ni mogoče pridobiti iz git-a @@ -207,72 +207,72 @@ Potreben ponovni zagon - + This macro is already installed. Ta makro je že nameščen. - + A macro has been installed and is available under Macro -> Macros menu Makro je bil namščen in je dosegljiv preko menija Makro -> Makri - + This addon is marked as obsolete Ta dodatek je označen kot zastarel - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. To ponavadi pomeni, da ni več vzdrževan in naprednejši dodatek s tega seznama nudi enake zmožnosti. - + Error: Unable to locate zip from Napaka: Ni mogoče najti zipa od - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Pri pridobivanju Git makra se je nekje zalomilo. Najverjetneje Git-ove izvršljive datoteke ni na tej poti - + This addon is marked as Python 2 Only Ta dodatek je označen, da je le za Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. To delovno okolje lahko ni več vzdrževano in namestitev v Python 3 okolje bo najverjetneje prinesla napake pri zagonu ali med delovanjem. - + User requested updating a Python 2 workbench on a system running Python 3 - Uporabnik je zaprosil posodobitev Python 2 delovnega okolja na okolje, ki se izvaja v Pythonu 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Delovno okolje je uspešno posodobljeno. Za uveljavitev sprememb ponovno zaženite FreeCAD. - + User requested installing a Python 2 workbench on a system running Python 3 - Uporabnik je zaprosil namestitev Python 2 delovnega okolja na okolje, ki se izvaja v Pythonu 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Kaže, da je težava v povezavi z Wiki, zaradi česa trenutno ni mogoče pridobiti seznama Wiki makrov - + Raw markdown displayed Prikazan surov Markdown - + Python Markdown library is missing. Knjižnica Python Markdowna manjka. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts index 95f1f7efce..0ac8d2456b 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sr.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Место инсталираног @@ -87,107 +87,107 @@ Макро се не може уклонити. - + Unable to download addon list. Не могу да преузмем списак додатака. - + Workbenches list was updated. Списак радних станица је освежен. - + Outdated GitPython detected, consider upgrading with pip. Откривен је застарели Гит Питон, размотрите надоградњу са пип-ом. - + List of macros successfully retrieved. Списак макроа је успешно довучен. - + Retrieving description... Довлачим опис... - + Retrieving info from Довлачим информације са - + An update is available for this addon. Ажурирање је доступно за овај додатак. - + This addon is already installed. Овај додатак је већ инсталиран. - + Retrieving info from git Довлачим информације са гита - + Retrieving info from wiki Довлачим информације са викија - + GitPython not found. Using standard download instead. Нисам нашао Гит Питона. Користим уобичајено преузимање. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Ваше издање питона не изгледа да подржава ЗИП датотеке. Не могу да наставим. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Радна станица је успешно инсталирана. Поново покрените FreeCAD да примените измене. - + Missing workbench Недостаје радна станица - + Missing python module Недостаје модул питона - + Missing optional python module (doesn't prevent installing) Недостаје изборни модул питона (не спречава инсталацију) - + Some errors were found that prevent to install this workbench Нађох неке грешке које спречавају инсталирање ове радне станице - + Please install the missing components first. Прво инсталирајте недостајуће компоненте. - + Error: Unable to download Грешка: Не могу да преузмем - + Successfully installed Успешно је инсталирано - + GitPython not installed! Cannot retrieve macros from git Гит Питон није инсталиран! Не могу да довучем макрое са гита @@ -207,72 +207,72 @@ Поновно покретање је потребно - + This macro is already installed. Овај макро је већ инсталиран. - + A macro has been installed and is available under Macro -> Macros menu Макро је инсталиран и доступан је у изборнику „Макро → Макрои“ - + This addon is marked as obsolete Овај додатак је означен као застарео - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Ово обично значи да више није одржаван, а неки напреднији додатак на овом списку обезбеђује исту функционалност. - + Error: Unable to locate zip from Грешка: Не могу да нађем зип из - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Нешто је пошло наопако са довлачењем Гит Макроа, вероватно Гитова извршна није у путањи - + This addon is marked as Python 2 Only Овај додатак је означен само као Питон 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Ова радна станица се можда више не одржава и њена инсталација на систему Питона 3 ће више него вероватно резултирати у грешкама при покретању или приликом коришћења. - + User requested updating a Python 2 workbench on a system running Python 3 - Корисник је затражио ажурирање радне станице Питона 2 на систему који покреће Питон 3 – - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Радна станица је успешно ажурирана. Поново покрените FreeCAD да примените измене. - + User requested installing a Python 2 workbench on a system running Python 3 - Корисник је затражио инсталацију радне станице Питона 2 на систему који покреће Питон 3 – - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Изгледа да постоји проблем у повезивању са Викијем, стога не могу да довучем Вики списак макроа у овом тренутку - + Raw markdown displayed Приказано је сирово обележавање - + Python Markdown library is missing. Недостаје библиотека Питоновог обележавања. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts index 3b33658a61..2820678f49 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_sv-SE.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Det gick inte att hämta en beskrivning för det här makrot. @@ -87,107 +87,107 @@ Makrot kunde inte tas bort. - + Unable to download addon list. Kan inte hämta tilläggslista. - + Workbenches list was updated. Arbetsytelista uppdaterades. - + Outdated GitPython detected, consider upgrading with pip. Utdaterad GitPython detekterad, överväg att uppgradera med pip. - + List of macros successfully retrieved. Makrolista hämtades. - + Retrieving description... Hämtar beskrivning... - + Retrieving info from Hämtar information från - + An update is available for this addon. En uppdatering är tillgänglig för detta tillägg. - + This addon is already installed. Det här tillägget är redan installerat. - + Retrieving info from git Hämtar information från git - + Retrieving info from wiki Hämtar information från wiki - + GitPython not found. Using standard download instead. GitPython hittades inte. Vanlig nedladdning används istället. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Din version av Python verkar inte stöda ZIP-filer. Kan inte fortsätta. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Arbetsytan installerades. Vänligen starta om FreeCAD för att den ska bli tillgänglig i programmet. - + Missing workbench Hittar inte arbetsyta - + Missing python module Hittar inte Python-modul - + Missing optional python module (doesn't prevent installing) Hittar inte frivillig Python-modul (förhindrar inte installation) - + Some errors were found that prevent to install this workbench Några fel hittades som förhindrar installationen av denna arbetsyta - + Please install the missing components first. Vänligen installera de saknade komponenterna först. - + Error: Unable to download Fel: Kan inte ladda ned - + Successfully installed Installationen lyckades - + GitPython not installed! Cannot retrieve macros from git GitPython inte installerad! Kan inte hämta makron från git @@ -207,72 +207,72 @@ Omstart krävs - + This macro is already installed. Det här makrot är redan installerat. - + A macro has been installed and is available under Macro -> Macros menu Ett makro har installerats och är tillgängligt under menyn Makro -> Makron - + This addon is marked as obsolete Detta addon är markerat som föråldrat - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Det betyder oftast att den inte längre underhålls, och vissa mer avancerade addon i den här listan ger samma funktionalitet. - + Error: Unable to locate zip from Fel: Det gick inte att hitta zip från - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Något gick fel med Git Macro Retrieval, möjligen Git körbara är inte i sökvägen - + This addon is marked as Python 2 Only Detta addon är markerat som Endast Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Denna arbetsbänk får inte längre underhållas och installera den på ett Python 3-system kommer mer än sannolikt resultera i fel vid start eller när den används. - + User requested updating a Python 2 workbench on a system running Python 3 - Användaren begärde att uppdatera en Python 2-arbetsbänk på ett system som kör Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench uppdateras med lyckat resultat. Vänligen starta om FreeCAD för att tillämpa ändringarna. - + User requested installing a Python 2 workbench on a system running Python 3 - Användaren begärde att installera en Python 2-arbetsbänk på ett system som kör Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Verkar vara ett problem som ansluter till Wiki, kan därför inte hämta Wiki makro lista för tillfället - + Raw markdown displayed Råmarkering visas - + Python Markdown library is missing. Python Markdown-biblioteket saknas. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts index 43fa668059..36de9c0a0b 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_tr.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Yükleme konumu @@ -87,107 +87,107 @@ Makro kaldırılamıyor. - + Unable to download addon list. Eklenti listesi indirilemiyor. - + Workbenches list was updated. Çalışma Tezgahı listesi güncelleştirildi. - + Outdated GitPython detected, consider upgrading with pip. Geçmiş sürüme ait GitPython tespit edildi. Pip ile güncelleştirmeyi değerlendirin. - + List of macros successfully retrieved. Makroların listesi başarı ile alındı. - + Retrieving description... Tanım alınıyor... - + Retrieving info from Bilgi alınıyor - + An update is available for this addon. Bu eklenti için bir güncelleştirme mevcuttur. - + This addon is already installed. Bu eklenti halihazırda yüklüdür. - + Retrieving info from git Git'ten bilgi alınıyor - + Retrieving info from wiki Wiki'den bilgi alınıyor - + GitPython not found. Using standard download instead. GitPython bulunamadı. Standart yüklemeyi kullanmayı deneyin. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Sizin Python versiyonunuz ZIP dosyalarını desteklemiyor olabilir. İşlem yapılamadı. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Çalışma Tezgahı başarı ile yüklendi. Değişikliklerin geçerli olması için lütfen FreeCAD'i yeniden başlatın. - + Missing workbench Eksik Çalışma Tezgahı - + Missing python module Eksik Python Modülü - + Missing optional python module (doesn't prevent installing) Eksik opsiyonel pyhton modülü (yüklemeye engel değil) - + Some errors were found that prevent to install this workbench Bu Çalışma Tezgahı'nın yüklenmesini engelleyen bazı hatalar bulundu - + Please install the missing components first. Lüften önce eksik bileşenleri yükleyin. - + Error: Unable to download Hata: İndirilemiyor - + Successfully installed Başarıyla Yüklendi - + GitPython not installed! Cannot retrieve macros from git GitPython kurulu değil! Makrolar Git'ten alınamıyor @@ -207,72 +207,72 @@ Yeniden başlatma gerekli - + This macro is already installed. Bu makro zaten yüklü. - + A macro has been installed and is available under Macro -> Macros menu Bir makro yüklendi ve buna makro->makrolar menüsü altından ulaşılabilir - + This addon is marked as obsolete Bu eklenti eskimiş olarak işaretleniyor - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Bu ifade genellikle, eklentinin artık sürdürülmediği ve bu listedeki bazı daha gelişmiş eklentilerin aynı işlevselliği sunacağı anlamına gelmektedir. - + Error: Unable to locate zip from Hata: Posta kodu bulunamıyor - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Git Makro Çağırma ile ilgili bir şeyler ters gitti; muhtemelen Git çalıştırılabilir, adres yolunda değil - + This addon is marked as Python 2 Only Bu eklenti, Sadece Python 2 olarak işaretleniyor - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. Bu tezgah artık sürdürülemeyebilir ve bunu Python 3 sistemine yüklemek, başlangıç hatalarında veya kullanım sırasında daha iyi sonuç verecektir. - + User requested updating a Python 2 workbench on a system running Python 3 - Kullanıcı, Python 3 çalıştıran bir sistemde bir Python 2 tezgahını güncellemek istedi - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Tezgah başarıyla güncellendi. Değişikliklerin uygulanması için lütfen FreeCAD' i yeniden başlatın. - + User requested installing a Python 2 workbench on a system running Python 3 - Kullanıcı, Python 3 çalıştıran bir sistemde bir Python 2 tezgahını yüklemek istedi - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Wiki'ye bağlanma sorunu gibi görünüyor, bu nedenle şu anda Wiki makro listesi alınamıyor - + Raw markdown displayed Ham markdown görüntülendi - + Python Markdown library is missing. Python Markdown kitaplığı eksik. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts index b198b50b87..1b87dbf3b9 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_uk.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -87,107 +87,107 @@ Макрос не може бути видалений. - + Unable to download addon list. Неможливо завантажити перелік додатків. - + Workbenches list was updated. Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Отримання опису... - + Retrieving info from Retrieving info from - + An update is available for this addon. Для цього додатка наявне оновлення. - + This addon is already installed. Цей додаток вже встановлений. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Відсутній модуль python - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download Помилка: завантаження неможливе - + Successfully installed Successfully installed - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git @@ -207,72 +207,72 @@ Restart required - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts index 39e5962e92..0d0d1ac1ea 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_val-ES.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Ubicació instal·lada @@ -87,107 +87,107 @@ No s'ha pogut eliminar la macro. - + Unable to download addon list. No es pot baixar la llista de complements. - + Workbenches list was updated. S'ha actualitzat la llista de bancs de treball. - + Outdated GitPython detected, consider upgrading with pip. S'ha detectat GitPython obsolet, plantegeu-vos l'actualització amb pip. - + List of macros successfully retrieved. La llista de macos s'ha recuperat correctament. - + Retrieving description... S'està recuperant la descripció... - + Retrieving info from S'està recuperant informació de - + An update is available for this addon. Hi ha una actualització disponible per a aquest complement. - + This addon is already installed. Aquest complement ja s'ha instal·lat. - + Retrieving info from git S'està recuperant informació de git - + Retrieving info from wiki S'està recuperant informació del wiki - + GitPython not found. Using standard download instead. No s'ha trobat GitPython. En lloc seu s'utilitza la descàrrega estàndard. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. La vostra versió de python n'o sembla ser compatible amb els fitxers ZIP. No es pot procedir. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. El banc de treball s'ha instal·lat correctament. Reinicieu FreeCAD per aplicar els canvis. - + Missing workbench Falta el banc de treball - + Missing python module Falta el mòdul python - + Missing optional python module (doesn't prevent installing) Falta el mòdul python opcional (n'o impedeix la instal·lació) - + Some errors were found that prevent to install this workbench S'han trobat alguns errors que impedeixen instal·lar aquest banc de treball - + Please install the missing components first. Instal·leu primer els components que falten. - + Error: Unable to download S'ha produït un error: no es pot baixar - + Successfully installed S'ha instal·lat correctament - + GitPython not installed! Cannot retrieve macros from git No s'ha instal·lat GitPython. No es poden recuperar les macros de git @@ -207,72 +207,72 @@ S'ha de reiniciar - + This macro is already installed. Aquesta macro ja s'ha instal·lat. - + A macro has been installed and is available under Macro -> Macros menu S'ha instal·lat una macro i està disponible en el menú Macro -> Macros - + This addon is marked as obsolete Aquest complement està marcat com a obsolet - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. Normalment significa que ja no és mantingut i que algun complement més avançats d'aquesta llista ofereix la mateixa funcionalitat. - + Error: Unable to locate zip from S'ha produït un error: no s'ha pogut localitzar el zip des de - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts index f51fa2563a..2b859088eb 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_vi.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location Installed location @@ -87,107 +87,107 @@ Macro could not be removed. - + Unable to download addon list. Unable to download addon list. - + Workbenches list was updated. Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench Missing workbench - + Missing python module Thiếu môđun python - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Vui lòng cài đặt các thành phần còn thiếu trước đã. - + Error: Unable to download Lỗi: Không thể tải về - + Successfully installed Cài đặt thành công - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git @@ -207,72 +207,72 @@ Yêu cầu khởi động máy - + This macro is already installed. Vĩ lệnh này đã được cài đặt. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete This addon is marked as obsolete - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from Error: Unable to locate zip from - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only This addon is marked as Python 2 Only - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts index 3f3307fb30..af0ea32f25 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-CN.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location 安装位置 @@ -87,107 +87,107 @@ 无法删除宏。 - + Unable to download addon list. 无法下载插件列表。 - + Workbenches list was updated. 工作台列表已更新。 - + Outdated GitPython detected, consider upgrading with pip. 检测到过时的 GitPython，建议您使用pip进行升级。 - + List of macros successfully retrieved. 成功获取了宏列表。 - + Retrieving description... 正在获取描述... - + Retrieving info from 获取信息 - + An update is available for this addon. 此插件可以更新。 - + This addon is already installed. 此插件已经被安装。 - + Retrieving info from git 从 git 获取信息 - + Retrieving info from wiki 从维基获取信息 - + GitPython not found. Using standard download instead. 找不到 GitPython。改用标准下载。 - + Your version of python doesn't appear to support ZIP files. Unable to proceed. 您的 python 版本似乎不支持 ZIP 文件。无法继续。 - + Workbench successfully installed. Please restart FreeCAD to apply the changes. 工作台安装成功。请重新启动 FreeCAD 以应用更改。 - + Missing workbench 缺少工作台 - + Missing python module 缺少 python 模块 - + Missing optional python module (doesn't prevent installing) 缺少可选的 python 模块 (没有阻止安装) - + Some errors were found that prevent to install this workbench 发现一些错误，无法安装这个工作台 - + Please install the missing components first. 请先安装丢失的组件。 - + Error: Unable to download 错误：无法下载 - + Successfully installed 成功安装了 - + GitPython not installed! Cannot retrieve macros from git GitPython 未安装！无法从 git 检索宏 @@ -207,72 +207,72 @@ 需要重启 - + This macro is already installed. 此宏已经安装。 - + A macro has been installed and is available under Macro -> Macros menu 宏已经安装，可以在宏 -> 宏菜单下使用 - + This addon is marked as obsolete 该插件被标记为已过时 - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. 这通常意味着不再维护它，并且此列表中的一些更高级的插件提供了相同的功能。 - + Error: Unable to locate zip from 错误：无法从中找到邮政编码 - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Git 宏检索出现问题，可能是 Git 可执行文件不在路径中 - + This addon is marked as Python 2 Only 此插件标记为仅支持 Python 2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. 这个工作台可能不再被维护，在python3系统上安装它很可能会在启动或使用时导致错误。 - + User requested updating a Python 2 workbench on a system running Python 3 - 用户请求在运行 Python 3 的系统上更新 Python 2 工作台 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. 工作台已成功更新。请重启 FreeCAD 以应用更改。 - + User requested installing a Python 2 workbench on a system running Python 3 - 用户请求在运行 Python 3 的系统上安装 Python 2 工作台 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time 连接到Wiki时出现问题，因此现在无法检索维基宏列表 - + Raw markdown displayed 显示原始Markdown - + Python Markdown library is missing. Python Markdown 库缺失。 diff --git a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts index a4e5dee877..a6d1832750 100644 --- a/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts +++ b/src/Mod/AddonManager/Resources/translations/AddonManager_zh-TW.ts @@ -4,7 +4,7 @@ AddonInstaller - + Installed location 安裝位置 @@ -87,107 +87,107 @@ 巨集無法被移除 - + Unable to download addon list. 無法下載附加元件清單 - + Workbenches list was updated. Workbenches list was updated. - + Outdated GitPython detected, consider upgrading with pip. Outdated GitPython detected, consider upgrading with pip. - + List of macros successfully retrieved. List of macros successfully retrieved. - + Retrieving description... Retrieving description... - + Retrieving info from Retrieving info from - + An update is available for this addon. An update is available for this addon. - + This addon is already installed. This addon is already installed. - + Retrieving info from git Retrieving info from git - + Retrieving info from wiki Retrieving info from wiki - + GitPython not found. Using standard download instead. GitPython not found. Using standard download instead. - + Your version of python doesn't appear to support ZIP files. Unable to proceed. Your version of python doesn't appear to support ZIP files. Unable to proceed. - + Workbench successfully installed. Please restart FreeCAD to apply the changes. Workbench successfully installed. Please restart FreeCAD to apply the changes. - + Missing workbench 遺失的工作台 - + Missing python module Missing python module - + Missing optional python module (doesn't prevent installing) Missing optional python module (doesn't prevent installing) - + Some errors were found that prevent to install this workbench Some errors were found that prevent to install this workbench - + Please install the missing components first. Please install the missing components first. - + Error: Unable to download 錯誤: 無法下載 - + Successfully installed 安裝成功 - + GitPython not installed! Cannot retrieve macros from git GitPython not installed! Cannot retrieve macros from git @@ -207,72 +207,72 @@ 必須重啟 - + This macro is already installed. This macro is already installed. - + A macro has been installed and is available under Macro -> Macros menu A macro has been installed and is available under Macro -> Macros menu - + This addon is marked as obsolete 這個附件己被標記為丟棄 - + This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. This usually means it is no longer maintained, and some more advanced addon in this list provides the same functionality. - + Error: Unable to locate zip from 錯誤: 無法取得本地的郵遞區號 - + Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path Something went wrong with the Git Macro Retrieval, possibly the Git executable is not in the path - + This addon is marked as Python 2 Only 這個附件元件標記只能用在Python2 - + This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. This workbench may no longer be maintained and installing it on a Python 3 system will more than likely result in errors at startup or while in use. - + User requested updating a Python 2 workbench on a system running Python 3 - User requested updating a Python 2 workbench on a system running Python 3 - - + Workbench successfully updated. Please restart FreeCAD to apply the changes. Workbench successfully updated. Please restart FreeCAD to apply the changes. - + User requested installing a Python 2 workbench on a system running Python 3 - User requested installing a Python 2 workbench on a system running Python 3 - - + Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time Appears to be an issue connecting to the Wiki, therefore cannot retrieve Wiki macro list at this time - + Raw markdown displayed Raw markdown displayed - + Python Markdown library is missing. Python Markdown library is missing. diff --git a/src/Mod/Arch/Resources/translations/Arch_af.qm b/src/Mod/Arch/Resources/translations/Arch_af.qm index 87f19b6713..36e310ea73 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_af.qm and b/src/Mod/Arch/Resources/translations/Arch_af.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_af.ts b/src/Mod/Arch/Resources/translations/Arch_af.ts index a84629d898..73604f45bc 100644 --- a/src/Mod/Arch/Resources/translations/Arch_af.ts +++ b/src/Mod/Arch/Resources/translations/Arch_af.ts @@ -574,47 +574,47 @@ If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Show the cut in the 3D view - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model @@ -769,7 +769,7 @@ The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - + The name of the font The name of the font @@ -779,7 +779,7 @@ The color of the area text - + The size of the text font The size of the text font @@ -1039,12 +1039,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1219,7 +1219,7 @@ The shape of this object - + The line width of this object The line width of this object @@ -1349,17 +1349,17 @@ The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Show the label in the 3D view @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Hoek - + is not closed is nie gesluit nie - + is not valid is nie geldig nie - + doesn't contain any solid bevat nie enige soliede nie - + contains a non-closed solid bevat 'n nie-geslote soliede - + contains faces that are not part of any solid bevat vlakke wat nie deel is van 'n soliede nie - + Grouping Groepering - + Ungrouping Verdeel groepe - + Split Mesh Deel maas op - + Mesh to Shape Maas na Vorm @@ -2267,12 +2272,12 @@ lêer %s suksesvol geskep. - + Add space boundary Add space boundary - + Remove space boundary Remove space boundary @@ -2357,17 +2362,17 @@ Create Structural System - + Object doesn't have settable IFC Attributes Object doesn't have settable IFC Attributes - + Disabling Brep force flag of object Disabling Brep force flag of object - + Enabling Brep force flag of object Enabling Brep force flag of object @@ -2487,7 +2492,7 @@ Height (mm) - + Create Component Create Component @@ -2512,22 +2517,22 @@ Kategorie - + Key Key - + Value Waarde - + Unit Eenheid - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2727,7 +2732,7 @@ Import CSV File - + Export CSV File Export CSV File @@ -2949,47 +2954,47 @@ Window elements - + Survey Survey - + Set description Set description - + Clear Maak skoon - + Copy Length Copy Length - + Copy Area Copy Area - + Export CSV Export CSV - + Description Beskrywing - + Area Area - + Total Total @@ -3039,17 +3044,17 @@ Create BuildingPart - + Invalid cutplane Invalid cutplane - + All good! No problems found All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -3204,37 +3209,37 @@ Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3369,42 +3374,42 @@ Successfully imported - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3891,12 +3896,12 @@ Floor creation aborted. Arch_Add - + Add component Voeg komponent by - + Adds the selected components to the active object Voeg die gekose komponente by die aktiewe voorwerp @@ -3974,12 +3979,12 @@ Floor creation aborted. Arch_Check - + Check Check - + Checks the selected objects for problems Checks the selected objects for problems @@ -3987,12 +3992,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Clones an object as an undefined architectural component @@ -4000,12 +4005,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes Close holes - + Closes holes in open shapes, turning them solids Closes holes in open shapes, turning them solids @@ -4013,12 +4018,12 @@ Floor creation aborted. Arch_Component - + Component Component - + Creates an undefined architectural component Creates an undefined architectural component @@ -4177,12 +4182,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Create IFC spreadsheet... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -4224,12 +4229,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape Maas na Vorm - + Turns selected meshes into Part Shape objects Turns selected meshes into Part Shape objects @@ -4396,12 +4401,12 @@ Floor creation aborted. Arch_Remove - + Remove component Verwyder komponent - + Remove the selected components from their parents, or create a hole in a component Verwyder die gekose komponente van hulle moederkomponente, of skep 'n gat in 'n komponent @@ -4409,12 +4414,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Verwyder Vorm van Boog - + Removes cubic shapes from Arch components Verwyder kubiese vorms van boogkomponente @@ -4461,12 +4466,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Kies nie-menigvoudige mase - + Selects all non-manifold meshes from the document or from the selected groups Selekteer al die nie-menigvoudige mase van die dokument of van die gekose groepe @@ -4505,12 +4510,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh Deel maas op - + Splits selected meshes into independent components Deel gekose mase op in onafhanklike komponente @@ -4539,12 +4544,12 @@ Floor creation aborted. Arch_Survey - + Survey Survey - + Starts survey Starts survey @@ -4552,12 +4557,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Toggle IFC Brep flag - + Force an object to be exported as Brep or not Force an object to be exported as Brep or not @@ -4565,12 +4570,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object diff --git a/src/Mod/Arch/Resources/translations/Arch_ar.qm b/src/Mod/Arch/Resources/translations/Arch_ar.qm index 77ed00f50d..11876a71ba 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ar.qm and b/src/Mod/Arch/Resources/translations/Arch_ar.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ar.ts b/src/Mod/Arch/Resources/translations/Arch_ar.ts index eb20ce053b..4bd57ed1e1 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ar.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ar.ts @@ -574,47 +574,47 @@ إذا كان خطأ، سيتم قطع المواد غير الصلبة أيضا، مع نتائج خاطئة محتملة. - + The display length of this section plane عرض طول هذا القسم - + The display height of this section plane عرض ارتفاع هذا القسم - + The size of the arrows of this section plane حجم أسهم هذا القسم - + Show the cut in the 3D view عرض القطع في في عرض ثلاثي الأبعاد - + The rendering mode to use وضع تقديم للاستخدام - + If cut geometry is shown or not إذا تم عرض اقتطاع الهندسة أم لا - + If cut geometry is filled or not إذا تم ملء اقتطاع الهندسة أم لا - + The size of the texts inside this object حجم النصوص داخل هذا الكائن - + If checked, source objects are displayed regardless of being visible in the 3D model إذا تم تحديدها، يتم عرض مصدر الكائنات بغض النظر عن كونها مرئية في نموذج 3D @@ -769,7 +769,7 @@ النص المراد إظهاره. استخدم ceiling, $walls, $floor, $tag, $label, $area$ لإدراج البيانات ذات الصلة - + The name of the font اسم الخط @@ -779,7 +779,7 @@ لون نص المنطقة - + The size of the text font حجم خط النص @@ -1039,12 +1039,12 @@ لائحة سُمك الطبقات - + The line color of the projected objects لون خط الأجسام المتوقعة - + The color of the cut faces (if turned on) لون أسطح القطع (إذا كانت مشغلة) @@ -1219,7 +1219,7 @@ هيئة هذا العنصر - + The line width of this object عرض الخط لهذا العنصر @@ -1349,17 +1349,17 @@ العناصر التي يجب النظر فيها من قبل قسم السطح هذا. فارغة يعني كل المستند. - + The transparency of this object شفافية هذا العنصر - + The color of this object لون هذا العنصر - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) المسافة بين سطح القطع وقطع العرض الأصلي (حافظ على قيمة صغيرة جدا ولكن مختلفة عن الصفر) @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Show the label in the 3D view @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ الزاوية - + is not closed ليست مغلقة - + is not valid غير صالح - + doesn't contain any solid لا تحتوي على أي صلابة - + contains a non-closed solid يحتوي على صلابة غير مغلقة - + contains faces that are not part of any solid يحتوي على وجوه ليست جزأ من أي صلابة - + Grouping التجميع - + Ungrouping فك التجميع - + Split Mesh Split Mesh - + Mesh to Shape Mesh to Shape @@ -2267,12 +2272,12 @@ تم انشاء الملف بنجاح. - + Add space boundary أضف حدود المساحة - + Remove space boundary إزالة حدود المساحة @@ -2357,17 +2362,17 @@ إنشاء النظام الهيكلي - + Object doesn't have settable IFC Attributes لا يحتوي الكائن على سمات IFC قابلة للتعيين - + Disabling Brep force flag of object Disabling Brep force flag of object - + Enabling Brep force flag of object Enabling Brep force flag of object @@ -2487,7 +2492,7 @@ الارتفاع (مم) - + Create Component إنشاء مكون @@ -2512,22 +2517,22 @@ فئة - + Key مفتاح - + Value القيمة - + Unit وحدة - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2727,7 +2732,7 @@ استيراد ملف CSV - + Export CSV File تصدير ملف CSV @@ -2949,47 +2954,47 @@ عناصر النافذة - + Survey Survey - + Set description كتابة الوصف - + Clear مسح - + Copy Length نسخ الطول - + Copy Area نسخ المنطقة - + Export CSV تصدير الـ CSV - + Description الوصف - + Area المنطقة - + Total المجموع @@ -3039,17 +3044,17 @@ Create BuildingPart - + Invalid cutplane Invalid cutplane - + All good! No problems found كل شيئ جيد! لم يتم العثور على أية مشاكل - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -3204,37 +3209,37 @@ Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3369,42 +3374,42 @@ تم الإستيراد بنجاح - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected اضف اختيارك - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3891,12 +3896,12 @@ Floor creation aborted. Arch_Add - + Add component إضافة عنصر - + Adds the selected components to the active object لإضافة المكونات المحددة إلى العنصر النشط @@ -3974,12 +3979,12 @@ Floor creation aborted. Arch_Check - + Check التحقق - + Checks the selected objects for problems للتحقق من الكائنات المحددة للمشاكل @@ -3987,12 +3992,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component مكون استنساخ - + Clones an object as an undefined architectural component يستنسخ كائن كمكون معماري غير معروف @@ -4000,12 +4005,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes إغلاق الثقوب - + Closes holes in open shapes, turning them solids إغلاق الثقوب في الأشكال المفتوحة، وتحويلها إلى صلبة @@ -4013,12 +4018,12 @@ Floor creation aborted. Arch_Component - + Component مكون - + Creates an undefined architectural component ينشئ مكون معماري غير معروف @@ -4177,12 +4182,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... إنشاء جدول البيانات IFC... - + Creates a spreadsheet to store IFC properties of an object. يقوم بإنشاء جدول للبيانات لتخزين خصائص عنصر. @@ -4224,12 +4229,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape Mesh to Shape - + Turns selected meshes into Part Shape objects Turns selected meshes into Part Shape objects @@ -4396,12 +4401,12 @@ Floor creation aborted. Arch_Remove - + Remove component إزالة المُكَوّن - + Remove the selected components from their parents, or create a hole in a component إزالة المكونات المختارة من أصولهم، أو إنشاء ثقب في أحَد المكونات @@ -4409,12 +4414,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Remove Shape from Arch - + Removes cubic shapes from Arch components Removes cubic shapes from Arch components @@ -4461,12 +4466,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Select non-manifold meshes - + Selects all non-manifold meshes from the document or from the selected groups Selects all non-manifold meshes from the document or from the selected groups @@ -4505,12 +4510,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh Split Mesh - + Splits selected meshes into independent components Splits selected meshes into independent components @@ -4539,12 +4544,12 @@ Floor creation aborted. Arch_Survey - + Survey Survey - + Starts survey بدء الاستطلاع @@ -4552,12 +4557,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Toggle IFC Brep flag - + Force an object to be exported as Brep or not Force an object to be exported as Brep or not @@ -4565,12 +4570,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object diff --git a/src/Mod/Arch/Resources/translations/Arch_ca.qm b/src/Mod/Arch/Resources/translations/Arch_ca.qm index 77855a480a..eeb89ac3d7 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ca.qm and b/src/Mod/Arch/Resources/translations/Arch_ca.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ca.ts b/src/Mod/Arch/Resources/translations/Arch_ca.ts index 8669c32620..e44a44a456 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ca.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ca.ts @@ -574,47 +574,47 @@ Si és fals, els objectes no sòlids també es tallaran, amb possibles resultats erronis - + The display length of this section plane La longigud que es visualitza del pla de secció - + The display height of this section plane L'alçària que es visualitza del pla de secció - + The size of the arrows of this section plane La mida de les fletxes del pla de secció - + Show the cut in the 3D view Mostra el tall en la vista 3D - + The rendering mode to use El mode de renderització que s'ha d'utilitzar - + If cut geometry is shown or not Si es mostra o no la geometria de tall - + If cut geometry is filled or not Si s'ompli o no la geometria de tall - + The size of the texts inside this object La mida dels textos dins d'aquest objecte - + If checked, source objects are displayed regardless of being visible in the 3D model Si està marcada, els objectes d'origen es mostren independentment que siguen visibles en el model 3D @@ -769,7 +769,7 @@ El text que s'ha de mostrar. Utilitzeu $area, $label, $tag, $floor, $walls, $ceiling per a inserir les dades corresponents - + The name of the font El nom del tipus de lletra @@ -779,7 +779,7 @@ El color de l'àrea de text - + The size of the text font La mida del tipus de lletra del text @@ -1039,12 +1039,12 @@ La llista dels gruixos de capa - + The line color of the projected objects El color de la línia dels objectes projectats - + The color of the cut faces (if turned on) El color de les cares retallades (si està activat) @@ -1219,7 +1219,7 @@ La forma d'aquest objecte - + The line width of this object El gruix de la línia d'aquest objecte @@ -1349,17 +1349,17 @@ Els objectes que han de ser considerats amb aquest pla de secció. Buit significa tot el document. - + The transparency of this object La transparència d'aquest objecte - + The color of this object El color d'aquest objecte - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) La distancia entre el pla de tall i la vista actual de tall (mantenir aquest valor molt baix però no a zero) @@ -1989,7 +1989,7 @@ Especifica si la direcció de la teulada hauria de ser invertida - + Show the label in the 3D view Mostra l'etiqueta a la vista 3D @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Angle - + is not closed no està tancat - + is not valid no és vàlid - + doesn't contain any solid no conté cap sòlid - + contains a non-closed solid conté un sòlid no tancat - + contains faces that are not part of any solid conté cares que no formen part de cap sòlid - + Grouping Agrupa - + Ungrouping Desagrupa - + Split Mesh Divideix la malla - + Mesh to Shape Malla a forma @@ -2267,12 +2272,12 @@ el fitxer %s s'ha creat correctament. - + Add space boundary Afegeix un límit espacial - + Remove space boundary Suprimeix el límit espacial @@ -2357,17 +2362,17 @@ Crea un sistema estructural - + Object doesn't have settable IFC Attributes L'objecte no té atributs d'IFC configurables - + Disabling Brep force flag of object Desactiva l'indicador de Brep forçat de l'objecte - + Enabling Brep force flag of object Activa l'indicador de Brep forçat de l'objecte @@ -2487,7 +2492,7 @@ Alçària (mm) - + Create Component Crea un component @@ -2512,22 +2517,22 @@ Categoria - + Key Clau - + Value Valor - + Unit Unitat - + Create IFC properties spreadsheet Crea el full de càlcul de propietats IFC @@ -2727,7 +2732,7 @@ Importa el fitxer CSV - + Export CSV File Exporta el fitxer CSV @@ -2948,47 +2953,47 @@ Elements de finestra - + Survey Recollida de dades - + Set description Estableix una descripció - + Clear Neteja - + Copy Length Còpia la longitud - + Copy Area Còpia d'àrea - + Export CSV Exporta a format CSV - + Description Descripció - + Area Àrea - + Total Total @@ -3038,17 +3043,17 @@ Crea un ObjecteConstrucció - + Invalid cutplane Pla de tall no vàlid - + All good! No problems found Tot correcte. No s'ha trobat cap problema - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: L'objecte no té atribut IfcProperties. Cancel·la la creació de full de càlcul per a l'objecte: @@ -3203,37 +3208,37 @@ Crear referències externes - + Section plane settings Configuració del pla de secció - + Objects seen by this section plane: Objectes vists per aquest pla de secció: - + Section plane placement: Posicionament del pla de secció: - + Rotate X Rotar X - + Rotate Y Rotar Y - + Rotate Z Rotar Z - + Resize Redimensionar @@ -3368,42 +3373,42 @@ S'ha importat correctament - + Remove highlighted objects from the list above Elimina els objectes ressaltats de la llista anterior - + Add selected Afegeix el seleccionat - + Add selected object(s) to the scope of this section plane Afegeix l'objecte o els objectes seleccionats a l'àmbit d'aquest pla de secció - + Rotates the plane along the X axis Gira el pla al llarg de l'eix X - + Rotates the plane along the Y axis Gira el pla al llarg de l'eix Y - + Rotates the plane along the Z axis Gira el pla al llarg de l'eix Z - + Resizes the plane to fit the objects in the list above Canvia la mida del pla per a ajustar els objectes en la llista anterior - + Centers the plane on the objects in the list above Centra el pla sobre els objectes de la llista anterior @@ -3873,12 +3878,12 @@ S'interromp la creació de la planta. Arch_Add - + Add component Afegeix un component - + Adds the selected components to the active object Afegeix els components seleccionats a l'objecte actiu @@ -3956,12 +3961,12 @@ S'interromp la creació de la planta. Arch_Check - + Check Comprova - + Checks the selected objects for problems Comprova si els objectes seleccionats presenten algun problema @@ -3969,12 +3974,12 @@ S'interromp la creació de la planta. Arch_CloneComponent - + Clone component Clona el component - + Clones an object as an undefined architectural component Clona un objecte com a component arquitectònic no definit @@ -3982,12 +3987,12 @@ S'interromp la creació de la planta. Arch_CloseHoles - + Close holes Tanca els forats - + Closes holes in open shapes, turning them solids Tanca els forats en les formes obertes, així les converteix en sòlids @@ -3995,12 +4000,12 @@ S'interromp la creació de la planta. Arch_Component - + Component Component - + Creates an undefined architectural component Crea un component arquitectònic no definit @@ -4159,12 +4164,12 @@ S'interromp la creació de la planta. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Crea un full de càlcul IFC... - + Creates a spreadsheet to store IFC properties of an object. Crea un full de càlcul per a emmagatzemar les propietats IFC d'un objecte. @@ -4206,12 +4211,12 @@ S'interromp la creació de la planta. Arch_MeshToShape - + Mesh to Shape Malla a forma - + Turns selected meshes into Part Shape objects Transforma les malles seleccionades en formes de peça @@ -4378,12 +4383,12 @@ S'interromp la creació de la planta. Arch_Remove - + Remove component Elimina el component - + Remove the selected components from their parents, or create a hole in a component Elimina les components seleccionats dels seus pares, o crea un forat en un component @@ -4391,12 +4396,12 @@ S'interromp la creació de la planta. Arch_RemoveShape - + Remove Shape from Arch Suprimeix la forma de l'arquitectura - + Removes cubic shapes from Arch components Suprimeix les formes cúbiques dels components de l'arquitectura @@ -4443,12 +4448,12 @@ S'interromp la creació de la planta. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Selecciona malles no desplegables - + Selects all non-manifold meshes from the document or from the selected groups Selecciona totes les malles de no desplegables del document o dels grups seleccionats @@ -4487,12 +4492,12 @@ S'interromp la creació de la planta. Arch_SplitMesh - + Split Mesh Divideix la malla - + Splits selected meshes into independent components Divideix les malles seleccionades en components independents @@ -4521,12 +4526,12 @@ S'interromp la creació de la planta. Arch_Survey - + Survey Recollida de dades - + Starts survey Inicia la recollida de dades @@ -4534,12 +4539,12 @@ S'interromp la creació de la planta. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Commuta l'indicador de Brep IFC - + Force an object to be exported as Brep or not Imposa (o no) que un objecte s'exporte com a Brep @@ -4547,12 +4552,12 @@ S'interromp la creació de la planta. Arch_ToggleSubs - + Toggle subcomponents Commuta els subcomponents - + Shows or hides the subcomponents of this object Mostra o amaga els subcomponents de l'objecte diff --git a/src/Mod/Arch/Resources/translations/Arch_cs.qm b/src/Mod/Arch/Resources/translations/Arch_cs.qm index 8b0784ac24..1986ef3ece 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_cs.qm and b/src/Mod/Arch/Resources/translations/Arch_cs.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_cs.ts b/src/Mod/Arch/Resources/translations/Arch_cs.ts index 51f792153a..3654892b1a 100644 --- a/src/Mod/Arch/Resources/translations/Arch_cs.ts +++ b/src/Mod/Arch/Resources/translations/Arch_cs.ts @@ -574,47 +574,47 @@ Pokud nepravda, ne-objemová tělesa budou také ořezána s možnými chybnými výsledky. - + The display length of this section plane Zobrazená délka této roviny řezu - + The display height of this section plane Zobrazená výka této roviny řezu - + The size of the arrows of this section plane Velikost šipek této roviny řezu - + Show the cut in the 3D view Zobrazit řez v 3D pohledu - + The rendering mode to use Režim vykreslování - + If cut geometry is shown or not Je-li zobrazena řezaná geometrie, nebo ne - + If cut geometry is filled or not Pokud je řezaná geometrie vyplněna, nebo ne - + The size of the texts inside this object Velikost textů uvnitř tohoto objektu - + If checked, source objects are displayed regardless of being visible in the 3D model Je-li zaškrtnuto, zobrazí se zdrojové objekty bez ohledu na to, zda jsou viditelné v 3D modelu @@ -769,7 +769,7 @@ Text, který se má zobrazit. Použij $area, $label, $tag, $floor, $walls, $ceiling pro vložení příslušných údajů - + The name of the font Název fontu @@ -779,7 +779,7 @@ The color of the area text - + The size of the text font Velikost fontu @@ -1039,12 +1039,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1219,7 +1219,7 @@ The shape of this object - + The line width of this object The line width of this object @@ -1349,17 +1349,17 @@ The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object Průhlednost tohoto objektu - + The color of this object Barva tohoto objektu - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Show the label in the 3D view @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Úhel - + is not closed není uzavřeno - + is not valid není platný - + doesn't contain any solid neobsahuje žádné těleso - + contains a non-closed solid obsahuje neuzavřené těleso - + contains faces that are not part of any solid obsahuje plochy které nejsou součástí žádného tělesa - + Grouping Seskupování - + Ungrouping Rozdělit skupinu - + Split Mesh Rozdělit síť - + Mesh to Shape Síť na Tvar @@ -2267,12 +2272,12 @@ soubor %s byl úspěšně vytvořen. - + Add space boundary Přidat hranici prostoru - + Remove space boundary Odstranit hranici prostoru @@ -2357,17 +2362,17 @@ Vytvořit konstrukční systém - + Object doesn't have settable IFC Attributes Objekt nemá nastavitelné IFC atributy - + Disabling Brep force flag of object Vypnutí vynuceného značení objektů Brep - + Enabling Brep force flag of object Zapnutí vynuceného značení objektů Brep @@ -2487,7 +2492,7 @@ Výška (mm) - + Create Component Vytvořit komponentu @@ -2512,22 +2517,22 @@ Kategorie - + Key Klíč - + Value Hodnota - + Unit Jednotka - + Create IFC properties spreadsheet Vytvořit tabulku IFC vlastností @@ -2727,7 +2732,7 @@ Importovat soubor CSV - + Export CSV File Exportovat soubor CSV @@ -2949,47 +2954,47 @@ Window elements - + Survey Prohlížení - + Set description Set description - + Clear Vyčistit - + Copy Length Copy Length - + Copy Area Copy Area - + Export CSV Exportovat CSV - + Description Popis - + Area Area - + Total Total @@ -3039,17 +3044,17 @@ Create BuildingPart - + Invalid cutplane Invalid cutplane - + All good! No problems found All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -3204,37 +3209,37 @@ Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3369,42 +3374,42 @@ Successfully imported - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Přidat vybrané - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3891,12 +3896,12 @@ Floor creation aborted. Arch_Add - + Add component Přidat komponentu - + Adds the selected components to the active object Přidá vybrané komponenty do aktivního objektu @@ -3974,12 +3979,12 @@ Floor creation aborted. Arch_Check - + Check Zkontroluj - + Checks the selected objects for problems Zkontroluje vybrané objekty na problémy @@ -3987,12 +3992,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Clones an object as an undefined architectural component @@ -4000,12 +4005,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes Uzavřít díry - + Closes holes in open shapes, turning them solids Uzavřít díry v otevřených plochách, vytvoření tělesa @@ -4013,12 +4018,12 @@ Floor creation aborted. Arch_Component - + Component Komponenta - + Creates an undefined architectural component Vytvoří nedefinovanou architektonickou komponentu @@ -4177,12 +4182,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Vytvořit tabulku IFC... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -4224,12 +4229,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape Síť na Tvar - + Turns selected meshes into Part Shape objects Převede vybrané objekty sítě na objekty tvaru @@ -4396,12 +4401,12 @@ Floor creation aborted. Arch_Remove - + Remove component Odstranit komponent - + Remove the selected components from their parents, or create a hole in a component Odstranit vybrané komponenty z jejich rodičů, nebo vytvořit díry v komponentě @@ -4409,12 +4414,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Odstranění Tvaru ze Stavby - + Removes cubic shapes from Arch components Odstraní krychlové tvary z komponent Stavby @@ -4461,12 +4466,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Vyberte non-manifold sítě - + Selects all non-manifold meshes from the document or from the selected groups Vybere všechny non-manifold sítě z dokumentu nebo z vybraných skupin @@ -4505,12 +4510,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh Rozdělit síť - + Splits selected meshes into independent components Rozdělí vybrané sítě na nezávislé komponenty @@ -4539,12 +4544,12 @@ Floor creation aborted. Arch_Survey - + Survey Prohlížení - + Starts survey Začne prohlížení @@ -4552,12 +4557,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Přepnout IFC Brep znak - + Force an object to be exported as Brep or not Vynutit nebo ne nevynutit export objektu jako Brep @@ -4565,12 +4570,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object diff --git a/src/Mod/Arch/Resources/translations/Arch_de.qm b/src/Mod/Arch/Resources/translations/Arch_de.qm index 027e620988..74e0982744 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_de.qm and b/src/Mod/Arch/Resources/translations/Arch_de.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_de.ts b/src/Mod/Arch/Resources/translations/Arch_de.ts index 91d700853a..ba336623f5 100644 --- a/src/Mod/Arch/Resources/translations/Arch_de.ts +++ b/src/Mod/Arch/Resources/translations/Arch_de.ts @@ -574,47 +574,47 @@ Wenn falsch, werden nicht-Feststoffe auch zugeschnitten, mit möglichen falschen Ergebnissen. - + The display length of this section plane Die Anzeigelänge dieser Sektionsebene - + The display height of this section plane Die Anzeigehöhe dieser Sektionsebene - + The size of the arrows of this section plane Die Größe der Pfeile dieser Sektionsebene - + Show the cut in the 3D view Zeigen Sie den Schnitt in der 3D-Ansicht - + The rendering mode to use Der zu verwendende Rendering-Modus - + If cut geometry is shown or not Ob die Schnittgeometrie angezeigt wird oder nicht - + If cut geometry is filled or not Ob die schnitt Geometrie gefüllt ist oder nicht - + The size of the texts inside this object Die Textgröße in diesem Objekt - + If checked, source objects are displayed regardless of being visible in the 3D model Wenn aktiviert, werden Quellobjekte angezeigt, unabhängig davon, ob sie im 3D-Modell sichtbar sind @@ -769,7 +769,7 @@ Der zu zeigende Text. Verwenden Sie $area, $label, $tag, $floor, $walls, $ceiling, um die entsprechenden Daten einzufügen - + The name of the font Der Name der Schriftart @@ -779,7 +779,7 @@ Die Farbe des Bereichstextes - + The size of the text font Die Größe der Textschriftart @@ -1039,12 +1039,12 @@ Die Liste der Schichtdicken - + The line color of the projected objects Linienfarbe projizierter Objekte - + The color of the cut faces (if turned on) Die Farbe der Schnittflächen (sofern aktiviert) @@ -1219,7 +1219,7 @@ Die Form dieses Objekts - + The line width of this object Die Linienbreite des Objekts @@ -1349,17 +1349,17 @@ Die Objekte, die von dieser Schnittebene berücksichtigt werden müssen. Leer bedeutet das ganze Dokument. - + The transparency of this object Die Transparenz dieses Objekts - + The color of this object Die Farbe dieses Objekts - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Die Entfernung zwischen der Schnitt-Ebene und der tatsächlichen Anzeige-Ebene (nutze einen sehr kleinen Wert ungleich 0) @@ -1989,7 +1989,7 @@ Bestimmt, ob die Richtung des Dachs gedreht werden soll - + Show the label in the 3D view Label in der 3D-Ansicht anzeigen @@ -2036,7 +2036,12 @@ If not zero, the axes are not represented as one full line but as two lines of the given length - If not zero, the axes are not represented as one full line but as two lines of the given length + Wenn nicht Null, werden die Achsen nicht als eine vollständige Linie, sondern als zwei Linien der angegebenen Länge dargestellt + + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. @@ -2087,47 +2092,47 @@ Winkel - + is not closed ist nicht geschlossen - + is not valid ist ungültig - + doesn't contain any solid Enthält keinen Volumenkörper - + contains a non-closed solid Enthält einen nicht geschlossenen Volumenkörper - + contains faces that are not part of any solid Enthält Flächen, die nicht Teil eines Volumenkörpers sind - + Grouping Gruppierung - + Ungrouping Aufheben der Gruppierung - + Split Mesh Netz zerlegen - + Mesh to Shape Wandelt Netz in Form um @@ -2267,12 +2272,12 @@ Datei %s erfolgreich erzeugt. - + Add space boundary Hinzufügen von Raum-Grenzen - + Remove space boundary Raum-Grenzen entfernen @@ -2357,17 +2362,17 @@ Erstelle ein Strukturelles System - + Object doesn't have settable IFC Attributes Objekt hat keine festlegbaren IFC Attribute - + Disabling Brep force flag of object Deaktiviere erzwungene Darstellung durch Begrenzungsflächen für dieses Objekt - + Enabling Brep force flag of object Aktiviere erzwungene Darstellung durch Begrenzungsflächen für dieses Objekt @@ -2487,7 +2492,7 @@ Höhe (mm) - + Create Component Komponente erstellen @@ -2512,22 +2517,22 @@ Kategorie - + Key Schlüssel - + Value Wert - + Unit Einheit - + Create IFC properties spreadsheet Erstelle Kalkulationstabelle für IFC-Eigenschaften @@ -2727,7 +2732,7 @@ CSV-Datei importieren - + Export CSV File CSV-Datei exportieren @@ -2949,47 +2954,47 @@ Fensterelemente - + Survey Messen - + Set description Beschreibung erstellen - + Clear Löschen - + Copy Length Länge kopieren - + Copy Area Fläche kopieren - + Export CSV Als CSV exportieren - + Description Beschreibung - + Area Fläche - + Total Summe @@ -3039,17 +3044,17 @@ Gebäudeteil erstellen - + Invalid cutplane Ungültige Schnittebene - + All good! No problems found Alles gut! Keine Probleme gefunden - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Das Objekt weist kein IFC-Eigenschaften Attribut auf. Die Erstellung einer Kalulationstabelle für dieses Objekt abbrechen: @@ -3204,37 +3209,37 @@ Externe Referenz erstellen - + Section plane settings Einstellungen Schnittebene - + Objects seen by this section plane: Objekte, die von dieser Schnittebene gesehen werden: - + Section plane placement: Platzierung der Schnittebene: - + Rotate X Drehen X - + Rotate Y Drehen Y - + Rotate Z Drehen Z - + Resize Größe ändern @@ -3369,42 +3374,42 @@ Erfolgreich importiert - + Remove highlighted objects from the list above Markierte Objekte aus der oben genannten Liste entfernen - + Add selected Auswahl hinzufügen - + Add selected object(s) to the scope of this section plane Ausgewählte Objekte in den Bereich dieser Schnittebene hinzufügen - + Rotates the plane along the X axis Rotiert die Ebene entlang X-Achse - + Rotates the plane along the Y axis Rotiert die Ebene entlang Y-Achse - + Rotates the plane along the Z axis Rotiert die Ebene entlang Z-Achse - + Resizes the plane to fit the objects in the list above Ändert die Ausdehnung der Ebene, um sie den Objekten in der oben genannten Liste anzupassen - + Centers the plane on the objects in the list above Verschiebt die Ebene, in die Mitte der in der oben genannten Liste befindlichen Objekte @@ -3891,12 +3896,12 @@ Geschosserstellung abgebrochen. Arch_Add - + Add component Komponente hinzufügen - + Adds the selected components to the active object Fügt ausgewählte Komponenten zum aktiven Objekt hinzu @@ -3974,12 +3979,12 @@ Geschosserstellung abgebrochen. Arch_Check - + Check Überprüfung - + Checks the selected objects for problems Überprüft die ausgewählten Objekte auf Probleme @@ -3987,12 +3992,12 @@ Geschosserstellung abgebrochen. Arch_CloneComponent - + Clone component Clone Komponente - + Clones an object as an undefined architectural component Klont ein Objekt als undefinierte architektonische Komponente @@ -4000,12 +4005,12 @@ Geschosserstellung abgebrochen. Arch_CloseHoles - + Close holes Schließt Löcher - + Closes holes in open shapes, turning them solids Schließt Löcher in offenen Formen und wandelt sie in Volumenkörper um @@ -4013,12 +4018,12 @@ Geschosserstellung abgebrochen. Arch_Component - + Component Komponente - + Creates an undefined architectural component Erstellt eine undefinierte Architekturkomponente @@ -4177,12 +4182,12 @@ Geschosserstellung abgebrochen. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Erstelle IFC Kalulationstabelle... - + Creates a spreadsheet to store IFC properties of an object. Erstellt eine Kalulationstabelle um IFC-Eigenschaften eines Objekts zu speichern. @@ -4224,12 +4229,12 @@ Geschosserstellung abgebrochen. Arch_MeshToShape - + Mesh to Shape Wandelt Netz in Form um - + Turns selected meshes into Part Shape objects Wandelt gewählte Netze in Part Form Objekte um @@ -4396,12 +4401,12 @@ Geschosserstellung abgebrochen. Arch_Remove - + Remove component Komponente entfernen - + Remove the selected components from their parents, or create a hole in a component Entferne die ausgewählten Komponenten von ihrem Elternobjekt, oder erstelle ein Loch in einer Komponente @@ -4409,12 +4414,12 @@ Geschosserstellung abgebrochen. Arch_RemoveShape - + Remove Shape from Arch Entfernt Formen aus Architektur - + Removes cubic shapes from Arch components Entfernt kubische Formen von Architektur-Komponenten @@ -4461,12 +4466,12 @@ Geschosserstellung abgebrochen. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Wähle nicht-mehrfache Polygonnetze - + Selects all non-manifold meshes from the document or from the selected groups Wählt alle nichtmannigfaltigen Polygonnetze aus dem Dokument oder aus der ausgewählten Gruppe @@ -4505,12 +4510,12 @@ Geschosserstellung abgebrochen. Arch_SplitMesh - + Split Mesh Netz zerlegen - + Splits selected meshes into independent components Zerlegt ausgewählte Netze in unabhängige Komponenten @@ -4539,12 +4544,12 @@ Geschosserstellung abgebrochen. Arch_Survey - + Survey Messen - + Starts survey Messen starten @@ -4552,12 +4557,12 @@ Geschosserstellung abgebrochen. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag IFC Brep Kennzeichen Umschalten - + Force an object to be exported as Brep or not Erzwingen den Exports eines Objekts als Brep (oder nicht) @@ -4565,12 +4570,12 @@ Geschosserstellung abgebrochen. Arch_ToggleSubs - + Toggle subcomponents Unterkomponenten umschalten - + Shows or hides the subcomponents of this object Zeigt oder verbirgt die Unterkomponenten dieses Objekts diff --git a/src/Mod/Arch/Resources/translations/Arch_el.qm b/src/Mod/Arch/Resources/translations/Arch_el.qm index d9d4c6ae25..d506ee430f 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_el.qm and b/src/Mod/Arch/Resources/translations/Arch_el.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_el.ts b/src/Mod/Arch/Resources/translations/Arch_el.ts index 89f8f0aff6..a29c0443c5 100644 --- a/src/Mod/Arch/Resources/translations/Arch_el.ts +++ b/src/Mod/Arch/Resources/translations/Arch_el.ts @@ -574,47 +574,47 @@ Aν αυτό είναι ψευδές, θα περικοπούν και τα μη στερεά στοιχεία, με πιθανώς λανθασμένα αποτελέσματα. - + The display length of this section plane Το μήκος εμφάνισης αυτού του επιπέδου τομής - + The display height of this section plane Το ύψος εμφάνισης αυτού του επιπέδου τομής - + The size of the arrows of this section plane Το μέγεθος των βελών αυτού του επιπέδου τομής - + Show the cut in the 3D view Εμφανίστε την περικοπή σε τρισδιάστατη προβολή - + The rendering mode to use Η λειτουργία αποτύπωσης προς χρήση - + If cut geometry is shown or not Αν η κομμένη γεωμετρική οντότητα απεικονίζεται ή όχι - + If cut geometry is filled or not Αν η κομμένη γεωμετρική οντότητα είναι γεμάτη ή όχι - + The size of the texts inside this object Το μέγεθος των κειμένων μέσα σε αυτό το αντικείμενο - + If checked, source objects are displayed regardless of being visible in the 3D model Εάν επιλεχθούν, τα πηγαία αντικείμενα εμφανίζονται ανεξάρτητα από το αν είναι ορατά στο τρισδιάστατο μοντέλο @@ -769,7 +769,7 @@ Το κείμενο προς εμφάνιση. Χρησιμοποιήστε $area, $label, $tag, $floor, $walls, $ceiling για να εισαγάγετε τα αντίστοιχα δεδομένα - + The name of the font Το όνομα της γραμματοσειράς @@ -779,7 +779,7 @@ Το χρώμα του κειμένου περιοχής - + The size of the text font Το μέγεθος της γραμματοσειράς κειμένου @@ -1039,12 +1039,12 @@ Η λίστα με τα πάχη στρωμάτων - + The line color of the projected objects Το χρώμα γραμμής των προβεβλημένων αντικειμένων - + The color of the cut faces (if turned on) Το χρώμα των κομμένων όψεων (αν είναι ενεργοποιημένο) @@ -1219,7 +1219,7 @@ Το σχήμα αυτού του αντικειμένου - + The line width of this object Το πλάτος γραμμής αυτού του αντικειμένου @@ -1349,17 +1349,17 @@ Τα αντικείμενα που πρέπει να εξετάζονται από αυτό το επίπεδο τομής. Κενό σημαίνει ολόκληρο το έγγραφο. - + The transparency of this object Η διαφάνεια αυτού του αντικειμένου - + The color of this object Το χρώμα αυτού του αντικειμένου - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Η απόσταση μεταξύ του κομμένου επιπέδου και της πραγματικής προβολής περικοπής (κρατήστε μια πολύ μικρή τιμή αλλά όχι μηδέν) @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Show the label in the 3D view @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Γωνία - + is not closed δεν είναι κλειστό - + is not valid δεν είναι έγκυρο - + doesn't contain any solid δεν περιέχει κανένα στερεό - + contains a non-closed solid περιέχει ένα μη κλειστό στερεό στοιχείο - + contains faces that are not part of any solid περιέχει όψεις που δεν είναι μέρος κανενός στερεού στοιχείου - + Grouping Ομαδοποίηση - + Ungrouping Κατάργηση ομαδοποίησης - + Split Mesh Διαιρέστε Πλέγμα - + Mesh to Shape Από Πλέγμα σε Σχήμα @@ -2267,12 +2272,12 @@ το αρχείο %s δημιουργήθηκε με επιτυχία. - + Add space boundary Προσθέστε χωρικό όριο - + Remove space boundary Αφαιρέστε χωρικό όριο @@ -2357,17 +2362,17 @@ Δημιουργήστε Δομικό Σύστημα - + Object doesn't have settable IFC Attributes Το αντικείμενο δεν έχει ρυθμιζόμενα χαρακτηριστικά IFC - + Disabling Brep force flag of object Απενεργοποίηση δείκτη Brep force του αντικειμένου - + Enabling Brep force flag of object Ενεργοποίηση δείκτη Brep force του αντικειμένου @@ -2487,7 +2492,7 @@ Ύψος (χιλιοστά) - + Create Component Δημιουργήστε Στοιχείο @@ -2512,22 +2517,22 @@ Κατηγορία - + Key Κλειδί - + Value Τιμή - + Unit Μονάδα - + Create IFC properties spreadsheet Δημιουργήστε υπολογιστικό φύλλο ιδιοτήτων IFC @@ -2727,7 +2732,7 @@ Εισάγετε Αρχείο CSV - + Export CSV File Εξαγάγετε Αρχείο CSV @@ -2949,47 +2954,47 @@ Στοιχεία παραθύρου - + Survey Επισκόπηση - + Set description Καθορίστε περιγραφή - + Clear Εκκαθάριση - + Copy Length Αντιγράψτε Μήκος - + Copy Area Αντιγράψτε Εμβαδόν - + Export CSV Εξαγάγετε CSV - + Description Περιγραφή - + Area Εμβαδόν - + Total Σύνολο @@ -3039,17 +3044,17 @@ Create BuildingPart - + Invalid cutplane Μη έγκυρο επίπεδο προς περικοπή - + All good! No problems found Όλα καλά! Δεν βρέθηκαν προβλήματα - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Το αντικείμενο δεν έχει κάποιο χαρακτηριστικό ιδιοτήτων IFC. Ακυρώστε τη δημιουργία υπολογιστικού φύλλου για το αντικείμενο: @@ -3204,37 +3209,37 @@ Δημιουργία εξωτερικής αναφοράς - + Section plane settings Section plane settings - + Objects seen by this section plane: Αντικείμενα που φαίνονται από αυτό το επίπεδο τομής: - + Section plane placement: Section plane placement: - + Rotate X Περιστροφή Υ - + Rotate Y Περιστροφή Υ - + Rotate Z Περιστροφή Ζ - + Resize Αλλαγή μεγέθους @@ -3369,42 +3374,42 @@ Εισήχθη με επιτυχία - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Προσθήκη επιλεγμένων - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Περιστρέψτε το επίπεδο στον άξονα X - + Rotates the plane along the Y axis Περιστρέψτε το επίπεδο στον άξονα Y - + Rotates the plane along the Z axis Περιστρέψτε το επίπεδο στον άξονα Z - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3891,12 +3896,12 @@ Floor creation aborted. Arch_Add - + Add component Προσθέστε εξάρτημα - + Adds the selected components to the active object Προσθέτει τα επιλεγμένα εξαρτήματα στο ενεργό αντικείμενο @@ -3974,12 +3979,12 @@ Floor creation aborted. Arch_Check - + Check Έλεγχος - + Checks the selected objects for problems Ελέγχει τα επιλεγμένα αντικείμενα για προβλήματα @@ -3987,12 +3992,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component Κλωνοποιήστε εξάρτημα - + Clones an object as an undefined architectural component Κλωνοποιεί ένα αντικείμενο ως ένα απροσδιόριστο αρχιτεκτονικό στοιχείο @@ -4000,12 +4005,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes Κλείστε τις οπές - + Closes holes in open shapes, turning them solids Κλείνει τις οπές σε ανοιχτά σχήματα, μετατρέποντας τα σε στερεά στοιχεία @@ -4013,12 +4018,12 @@ Floor creation aborted. Arch_Component - + Component Στοιχείο - + Creates an undefined architectural component Δημιουργεί ένα απροσδιόριστο αρχιτεκτονικό στοιχείο @@ -4177,12 +4182,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Δημιουργήστε υπολογιστικό φύλλο IFC... - + Creates a spreadsheet to store IFC properties of an object. Δημιουργεί ένα υπολογιστικό φύλλο για αποθήκευση των ιδιοτήτων IFC ενός αντικειμένου. @@ -4224,12 +4229,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape Από Πλέγμα σε Σχήμα - + Turns selected meshes into Part Shape objects Μετατρέπει επιλεγμένα πλέγματα σε εξαρτήματα @@ -4396,12 +4401,12 @@ Floor creation aborted. Arch_Remove - + Remove component Αφαιρέστε στοιχείο - + Remove the selected components from their parents, or create a hole in a component Αφαιρέστε τα επιλεγμένα στοιχεία από τα γονικά τους στοιχεία, ή δημιουργήστε μια οπή σε ένα στοιχείο @@ -4409,12 +4414,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Αφαιρέστε Σχήμα από Αρχιτεκτονικό στοιχείο - + Removes cubic shapes from Arch components Αφαιρεί κυβικά σχήματα από Αρχιτεκτονικά στοιχεία @@ -4461,12 +4466,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Επιλέξτε μη-πολλαπλά πλέγματα - + Selects all non-manifold meshes from the document or from the selected groups Επιλέγει όλα τα μη-πολλαπλά πλέγματα από το έγγραφο ή από τις επιλεγμένες ομάδες @@ -4505,12 +4510,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh Διαιρέστε Πλέγμα - + Splits selected meshes into independent components Διαιρεί επιλεγμένα πλέγματα σε ανεξάρτητες συνιστώσες @@ -4539,12 +4544,12 @@ Floor creation aborted. Arch_Survey - + Survey Επισκόπηση - + Starts survey Εκκινεί την επισκόπηση @@ -4552,12 +4557,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Εναλλαγή του δείκτη IFC Brep - + Force an object to be exported as Brep or not Επιβάλλετε την εξαγωγή ενός στοιχείου ως Brep ή όχι @@ -4565,12 +4570,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents Εναλλαγή υποσυστημάτων - + Shows or hides the subcomponents of this object Εμφανίζει ή αποκρύπτει τα υποσυστήματα αυτού του στοιχείου diff --git a/src/Mod/Arch/Resources/translations/Arch_es-ES.qm b/src/Mod/Arch/Resources/translations/Arch_es-ES.qm index 695440b359..eaa4deb78a 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_es-ES.qm and b/src/Mod/Arch/Resources/translations/Arch_es-ES.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts index ba69b055bb..5e1432c981 100644 --- a/src/Mod/Arch/Resources/translations/Arch_es-ES.ts +++ b/src/Mod/Arch/Resources/translations/Arch_es-ES.ts @@ -574,47 +574,47 @@ Si es false, los objetos no sólidos se cortarán, con posibles resultados equivocados. - + The display length of this section plane Mostrar la longitud del plano de sección - + The display height of this section plane Mostrar la altura de este plano de sección - + The size of the arrows of this section plane El tamaño de las flechas de este plano de sección - + Show the cut in the 3D view Mostrar el corte en la vista 3D - + The rendering mode to use El modo de renderizado a utilizar - + If cut geometry is shown or not Si la geometría de corte se muestra o no - + If cut geometry is filled or not Si el corte de la geometría está lleno o no - + The size of the texts inside this object El tamaño de los textos dentro de este objeto - + If checked, source objects are displayed regardless of being visible in the 3D model Si está marcada, se muestran objetos de origen sin importar ser visible en el modelo 3D @@ -769,7 +769,7 @@ El texto a mostra. Utilizar $area, $label, $tag, $floor, $walls, $ceiling para insertar los datos correspondientes - + The name of the font El nombre de la fuente @@ -779,7 +779,7 @@ El color del área de texto - + The size of the text font El tamaño de la fuente de texto @@ -1039,12 +1039,12 @@ La lista de espesores por capa - + The line color of the projected objects El color de línea de los objetos proyectados - + The color of the cut faces (if turned on) El color de las caras cortadas (si está encendido) @@ -1219,7 +1219,7 @@ La forma de este objeto - + The line width of this object El ancho de la linea de este objeto @@ -1349,17 +1349,17 @@ Los objetos que deben ser considerados por este plano de sección. Vacío significa todo el documento. - + The transparency of this object La transparencia de este objeto - + The color of this object El color de este objeto - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) La distancia entre el plano de corte y la vista actual de corte (mantener esto a un valor muy bajo pero no cero) @@ -1989,7 +1989,7 @@ Especifica si la dirección del techo debe ser invertida - + Show the label in the 3D view Mostrar la etiqueta en la vista 3D @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length Si no es cero, los ejes no estarán representados como una línea completa sino como dos líneas de la longitud dada + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Ángulo - + is not closed no está cerrada - + is not valid no es válido - + doesn't contain any solid no contiene ningún sólido - + contains a non-closed solid contiene un sólido no cerrado - + contains faces that are not part of any solid contiene caras que no son parte de ningún sólido - + Grouping Agrupación - + Ungrouping Desagrupar - + Split Mesh Dividir malla - + Mesh to Shape Malla a forma @@ -2267,12 +2272,12 @@ archivo %s creado correctamente. - + Add space boundary Añadir límite espacial - + Remove space boundary Remover límite espacial @@ -2357,17 +2362,17 @@ Crear sistema estructural - + Object doesn't have settable IFC Attributes Objeto no tiene atributos configurables de IFC - + Disabling Brep force flag of object Desactivar indicador de fuerza Brep del objeto - + Enabling Brep force flag of object Activar indicador de fuerza Brep del objeto @@ -2487,7 +2492,7 @@ Altura (mm) - + Create Component Crear componente @@ -2512,22 +2517,22 @@ Categoría - + Key Clave - + Value Valor - + Unit Unidad - + Create IFC properties spreadsheet Crear la hoja de cálculo de propiedades IFC @@ -2727,7 +2732,7 @@ Importar archivo CSV - + Export CSV File Exportar archivo CSV @@ -2949,47 +2954,47 @@ Elementos de la ventana - + Survey Encuesta - + Set description Descripción set - + Clear Limpiar - + Copy Length Longitud de la copia - + Copy Area Área de copiado - + Export CSV Exportar CSV - + Description Descripción - + Area Área - + Total Total @@ -3039,17 +3044,17 @@ Crear un BuildingPart - + Invalid cutplane Plano de corte no válido - + All good! No problems found ¡Todo bien! No se encontraron problemas - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: El objeto no contiene el atributo IfcProperties. Cancelar la creación de hojas de cálculo para el objeto: @@ -3204,37 +3209,37 @@ Crear refencia externa - + Section plane settings Ajustes de plano de sección - + Objects seen by this section plane: Objetos vistos por esta seccion del plano: - + Section plane placement: Ubicación de plano de sección: - + Rotate X Rotar X - + Rotate Y Rotar Y - + Rotate Z Rotar Z - + Resize Redimensionar @@ -3369,42 +3374,42 @@ Importados con éxito - + Remove highlighted objects from the list above Eliminar objetos resaltados de la lista anterior - + Add selected Añadir la selección - + Add selected object(s) to the scope of this section plane Añadir objeto(s) seleccionado al alcance de este plano de sección - + Rotates the plane along the X axis Rota el plano a lo largo del eje X - + Rotates the plane along the Y axis Rota el plano a lo largo del eje Y - + Rotates the plane along the Z axis Rota el plano a lo largo del eje Z - + Resizes the plane to fit the objects in the list above Redimensiona el plano para encajar los objetos en la lista anterior - + Centers the plane on the objects in the list above Centra el plano en los objetos de la lista anterior @@ -3891,12 +3896,12 @@ Creación de piso cancelada. Arch_Add - + Add component Agregar componente - + Adds the selected components to the active object Añade los componentes seleccionados al objeto activo @@ -3974,12 +3979,12 @@ Creación de piso cancelada. Arch_Check - + Check Verifica - + Checks the selected objects for problems Verificar problemas de los objetos seleccionados @@ -3987,12 +3992,12 @@ Creación de piso cancelada. Arch_CloneComponent - + Clone component Clonar componente - + Clones an object as an undefined architectural component Crea un objeto como un componente arquitectónico indefinido @@ -4000,12 +4005,12 @@ Creación de piso cancelada. Arch_CloseHoles - + Close holes Cerrar agujeros - + Closes holes in open shapes, turning them solids Cierra agujeros en formas abiertas, convirtiéndolas en sólidos @@ -4013,12 +4018,12 @@ Creación de piso cancelada. Arch_Component - + Component Componente - + Creates an undefined architectural component Crea un Componente arquitectónico indefinido @@ -4177,12 +4182,12 @@ Creación de piso cancelada. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Crear la hoja de cálculo IFC... - + Creates a spreadsheet to store IFC properties of an object. Crea una hoja de cálculo para almacenar las propiedades IFC de un objeto. @@ -4224,12 +4229,12 @@ Creación de piso cancelada. Arch_MeshToShape - + Mesh to Shape Malla a forma - + Turns selected meshes into Part Shape objects Convierte las mallas seleccionadas en convierte en objetos forma de pieza @@ -4396,12 +4401,12 @@ Creación de piso cancelada. Arch_Remove - + Remove component Eliminar componente - + Remove the selected components from their parents, or create a hole in a component Eliminar los componentes seleccionados de sus padres, o crear un agujero en un componente @@ -4409,12 +4414,12 @@ Creación de piso cancelada. Arch_RemoveShape - + Remove Shape from Arch Eliminar forma de arco - + Removes cubic shapes from Arch components Quita formas cúbicas de componentes Arco @@ -4461,12 +4466,12 @@ Creación de piso cancelada. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Seleccionar mallas no-múltiples - + Selects all non-manifold meshes from the document or from the selected groups Selecciona todas las mallas no-múltiples del documento o de los grupos seleccionados @@ -4505,12 +4510,12 @@ Creación de piso cancelada. Arch_SplitMesh - + Split Mesh Dividir malla - + Splits selected meshes into independent components Divide las mallas seleccionadas en componentes independientes @@ -4539,12 +4544,12 @@ Creación de piso cancelada. Arch_Survey - + Survey Encuesta - + Starts survey Iniciar encuesta @@ -4552,12 +4557,12 @@ Creación de piso cancelada. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Alternar IFG Brep flag - + Force an object to be exported as Brep or not Forzar a un objeto para ser exportado como Brep o no @@ -4565,12 +4570,12 @@ Creación de piso cancelada. Arch_ToggleSubs - + Toggle subcomponents Alternar subcomponentes - + Shows or hides the subcomponents of this object Muestra u oculta los subcomponentes de este objeto diff --git a/src/Mod/Arch/Resources/translations/Arch_eu.qm b/src/Mod/Arch/Resources/translations/Arch_eu.qm index 9e06b7f5e4..f43c8aec70 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_eu.qm and b/src/Mod/Arch/Resources/translations/Arch_eu.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_eu.ts b/src/Mod/Arch/Resources/translations/Arch_eu.ts index 0e75cce323..9b738b0710 100644 --- a/src/Mod/Arch/Resources/translations/Arch_eu.ts +++ b/src/Mod/Arch/Resources/translations/Arch_eu.ts @@ -574,47 +574,47 @@ Gezurra bada, solidoak ez direnak ere moztuko dira, eta emaitzak okerrak izan daitezke. - + The display length of this section plane Sekzio-plano honen bistaratze-luzera - + The display height of this section plane Sekzio-plano honen bistaratze-altuera - + The size of the arrows of this section plane Sekzio-plano honen gezien tamaina - + Show the cut in the 3D view Erakutsi moztea 3D bistan - + The rendering mode to use Erabiliko den errendatze-modua - + If cut geometry is shown or not Mozte-geometria erakutsiko den ala ez - + If cut geometry is filled or not Mozte-geometria beteta dagoen ala ez - + The size of the texts inside this object Objektu honen barruko testuen tamaina - + If checked, source objects are displayed regardless of being visible in the 3D model Markatuta badago, iturburu-objektuak erakutsi egingo dira, 3D ereduan ikusgarriak izan zein ez @@ -769,7 +769,7 @@ Erakutsiko den testua. Erabili $area, $label, $tag, $floor, $walls, $ceiling bakoitzari dagokion datua txertatzeko - + The name of the font Letra-tipoaren izena @@ -779,7 +779,7 @@ Area-testuaren kolorea - + The size of the text font Testuaren letra-tamaina @@ -1039,12 +1039,12 @@ Geruza-lodieren zerrenda - + The line color of the projected objects Proiektatutako objektuen lerro-kolorea - + The color of the cut faces (if turned on) Mozte-aurpegien kolorea (aktibatuta badago) @@ -1219,7 +1219,7 @@ Objektu honen forma - + The line width of this object Objektu honen lerro-zabalera @@ -1349,17 +1349,17 @@ Sekzio-plano honek kontuan hartu behar diren objektuak. Hutsik badago, dokumentu osoa hartuko da. - + The transparency of this object Objektu honen gardentasuna - + The color of this object Objektu honen kolorea - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Mozte-planoaren eta uneko bistaren moztearen arteko distantzia (balio horrek oso txikia izan behar du, baina ez zero) @@ -1989,7 +1989,7 @@ Teilatuaren norabidea irauli behar den ala ez zehazten du - + Show the label in the 3D view Erakutsi etiketa 3D bistan @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Angelua - + is not closed ez dago itxita - + is not valid ez du balio - + doesn't contain any solid ez dauka solidorik - + contains a non-closed solid itxi gabeko solidoa dauka - + contains faces that are not part of any solid inongo solidoren zati ez diren aurpegiak dauzka - + Grouping Elkartu - + Ungrouping Banandu - + Split Mesh Zatitu amarauna - + Mesh to Shape Amarauna formara @@ -2267,12 +2272,12 @@ %s fitxategia zuzen sortua. - + Add space boundary Gehitu espazio-muga - + Remove space boundary Kendu espazio-muga @@ -2357,17 +2362,17 @@ Sortu egiturazko sistema - + Object doesn't have settable IFC Attributes Objektuak ez du IFC atributu ezargarririk - + Disabling Brep force flag of object Objektuaren Brep indarraren bandera desgaitzen - + Enabling Brep force flag of object Objektuaren Brep indarraren bandera gaitzen @@ -2487,7 +2492,7 @@ Altuera (mm) - + Create Component Sortu osagaia @@ -2512,22 +2517,22 @@ Kategoria - + Key Gakoa - + Value Balioa - + Unit Unitatea - + Create IFC properties spreadsheet Sortu IFC propietateen kalkulu-orria @@ -2727,7 +2732,7 @@ Inportatu CSV fitxategia - + Export CSV File Esportatu CSV fitxategia @@ -2949,47 +2954,47 @@ Leiho-elementuak - + Survey Lur-neurketa - + Set description Ezarri deskribapena - + Clear Garbitu - + Copy Length Kopiatu luzera - + Copy Area Kopiatu area - + Export CSV Esportatu CSVa - + Description Deskribapena - + Area Area - + Total Totala @@ -3039,17 +3044,17 @@ Sortu eraikin-zatia - + Invalid cutplane Baliogabeko mozte-planoa - + All good! No problems found Ederto! Ez dugu arazorik aurkitu - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Objektuak ez du IfcProperties atributurik. Utzi kalkulu-orria sortzeari honako objekturako: @@ -3204,37 +3209,37 @@ Sortu kanpoko erreferentzia - + Section plane settings Sekzio-planoaren ezarpenak - + Objects seen by this section plane: Sekzio-plano honek ikusten dituen objektuak: - + Section plane placement: Sekzio-planoaren kokapena: - + Rotate X Biratu X - + Rotate Y Biratu Y - + Rotate Z Biratu Z - + Resize Aldatu tamaina @@ -3369,42 +3374,42 @@ Ongi inportatu da - + Remove highlighted objects from the list above Kendu nabarmendutako objektuak goiko zerrendatik - + Add selected Gehitu hautatuak - + Add selected object(s) to the scope of this section plane Gehitu hautatutako objektua(k) sekzio-plano honen esparrura - + Rotates the plane along the X axis Planoa X ardatzean biratzen du - + Rotates the plane along the Y axis Planoa Y ardatzean biratzen du - + Rotates the plane along the Z axis Planoa Z ardatzean biratzen du - + Resizes the plane to fit the objects in the list above Planoa goiko zerrendako objektuekin doitzeko biratzen du - + Centers the plane on the objects in the list above Planoa goiko zerrendako objektuetan zentratzen du @@ -3891,12 +3896,12 @@ Solairuaren sorrera utzi egin da. Arch_Add - + Add component Gehitu osagaia - + Adds the selected components to the active object Hautatutako osagaiak objektu aktiboari gehitzen dizkio @@ -3974,12 +3979,12 @@ Solairuaren sorrera utzi egin da. Arch_Check - + Check Egiaztatu - + Checks the selected objects for problems Hautatutako objektuak aztertzen ditu arazoak dituzten aurkitzeko @@ -3987,12 +3992,12 @@ Solairuaren sorrera utzi egin da. Arch_CloneComponent - + Clone component Klonatu osagaia - + Clones an object as an undefined architectural component Objektu bat klonatzen du arkitektura-osagai definitu gabea sortzeko @@ -4000,12 +4005,12 @@ Solairuaren sorrera utzi egin da. Arch_CloseHoles - + Close holes Itxi zuloak - + Closes holes in open shapes, turning them solids Forma irekietako zuloak ixten ditu eta haiek solido bihurtzen ditu @@ -4013,12 +4018,12 @@ Solairuaren sorrera utzi egin da. Arch_Component - + Component Osagaia - + Creates an undefined architectural component Definitu gabeko arkitektura-osagai bat sortzen du @@ -4177,12 +4182,12 @@ Solairuaren sorrera utzi egin da. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Sortu IFC kalkulu-orria... - + Creates a spreadsheet to store IFC properties of an object. Kalkulu-orri bat sortzen du objektu baten IFC propietateak gordetzeko. @@ -4224,12 +4229,12 @@ Solairuaren sorrera utzi egin da. Arch_MeshToShape - + Mesh to Shape Amarauna formara - + Turns selected meshes into Part Shape objects Hautatutako amaraunak piezen forma-objektu bihurtzen ditu @@ -4396,12 +4401,12 @@ Solairuaren sorrera utzi egin da. Arch_Remove - + Remove component Kendu osagaia - + Remove the selected components from their parents, or create a hole in a component Kendu hautatutako osagaiak haien gurasoetatik, edo sortu zulo bat osagai batean @@ -4409,12 +4414,12 @@ Solairuaren sorrera utzi egin da. Arch_RemoveShape - + Remove Shape from Arch Kendu forma arkitekturatik - + Removes cubic shapes from Arch components Forma kubikoak kentzen ditu arkitektura-osagaietatik @@ -4461,12 +4466,12 @@ Solairuaren sorrera utzi egin da. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Hautatu anizkoitzak ez diren amaraunak - + Selects all non-manifold meshes from the document or from the selected groups Hautatu anizkoitzak ez diren amaraun guztiak, dokumentuan edo hautatutako taldeetan @@ -4505,12 +4510,12 @@ Solairuaren sorrera utzi egin da. Arch_SplitMesh - + Split Mesh Zatitu amarauna - + Splits selected meshes into independent components Hautatutako amaraunak osagai independenteetan zatitzen ditu @@ -4539,12 +4544,12 @@ Solairuaren sorrera utzi egin da. Arch_Survey - + Survey Lur-neurketa - + Starts survey Lur-neurketa abiarazten du @@ -4552,12 +4557,12 @@ Solairuaren sorrera utzi egin da. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Txandakatu IFC Brep bandera - + Force an object to be exported as Brep or not Behartu objektu bat Brep gisa, edo ez, esportatua izan dadin @@ -4565,12 +4570,12 @@ Solairuaren sorrera utzi egin da. Arch_ToggleSubs - + Toggle subcomponents Txandakatu azpiosagaiak - + Shows or hides the subcomponents of this object Objektu honen azpiosagaiak erakusten edo ezkutatzen ditu diff --git a/src/Mod/Arch/Resources/translations/Arch_fi.qm b/src/Mod/Arch/Resources/translations/Arch_fi.qm index c5ea085a0b..af9ac6cbde 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_fi.qm and b/src/Mod/Arch/Resources/translations/Arch_fi.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_fi.ts b/src/Mod/Arch/Resources/translations/Arch_fi.ts index 7a331fb8c8..970335864e 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fi.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fi.ts @@ -574,47 +574,47 @@ Jos epätosi, niin ei-kiinteät leikataan myös, myös mahdollisten väärien tuloksien tuloksien kanssa. - + The display length of this section plane Tämän lohkotason näytön pituus - + The display height of this section plane Tämän lohkotason näytön korkeus - + The size of the arrows of this section plane Nuolien koko tässä lohkotasossa - + Show the cut in the 3D view Näytä leikkaus 3D-näkymässä - + The rendering mode to use Käytettävä renderointitila - + If cut geometry is shown or not Näytetäänkö leikkausgeometria vai ei näytetä - + If cut geometry is filled or not Onko leikkausgeometria täytetty vai ei ole - + The size of the texts inside this object Tämän objektin sisällä olevien tekstien koko - + If checked, source objects are displayed regardless of being visible in the 3D model Jos valittu, lähdeobjektit näytetään riippumatta siitä, että ne näkyvät 3D-mallissa @@ -769,7 +769,7 @@ Näytettävä teksti. Käytä $area, $label, $tag, $floor, $walls, $ceiling lisätäksesi vastaavat tiedot - + The name of the font Fontin nimi @@ -779,7 +779,7 @@ Alueen tekstin väri - + The size of the text font Tekstin kirjaimiston koko @@ -1039,12 +1039,12 @@ Kerroksen paksuuksien luettelo - + The line color of the projected objects Projisoitujen kohteiden rivin väri - + The color of the cut faces (if turned on) Leikkauksen tahkojen väri (jos käytössä) @@ -1219,7 +1219,7 @@ Tämän objektin muoto - + The line width of this object Tämän objektin viivan leveys @@ -1349,17 +1349,17 @@ Objektit, jotka on otettava huomioon tämän leikkaustason mukaan. Tyhjä tarkoittaa koko dokumenttia. - + The transparency of this object Tämän kohteen läpinäkyvyys - + The color of this object Tämän objektin väri - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Etäisyys poikkileikkaustason ja todellisen näkymän leikkaamisen välillä (pidä tässä hyvin pieni arvo, mutta ei nollaa) @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Show the label in the 3D view @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Kulma - + is not closed ei ole suljettu - + is not valid ei ole kelvollinen - + doesn't contain any solid ei sisällä yhtään monitahokasta - + contains a non-closed solid sisältää avoimen monitahokkaan - + contains faces that are not part of any solid sisältää tahkoja jotka eivät ole minkään monitahokkaan osana - + Grouping Ryhmittely - + Ungrouping Ryhmittelyn purkaminen - + Split Mesh Jaa verkko - + Mesh to Shape Verkko Muodolle @@ -2267,12 +2272,12 @@ tiedoston %s luominen onnistui. - + Add space boundary Lisää tilan raja - + Remove space boundary Poista tilan raja @@ -2357,17 +2362,17 @@ Luo rakenteellinen järjestelmä - + Object doesn't have settable IFC Attributes Kohteessa ei ole asetettavia IFC määritteitä - + Disabling Brep force flag of object Kytkee pois kohteen Brep voiman lipun - + Enabling Brep force flag of object Kytkee päälle kohteen Brep voiman lipun @@ -2487,7 +2492,7 @@ Korkeus (mm) - + Create Component Create Component @@ -2512,22 +2517,22 @@ Kategoria - + Key Key - + Value Arvo - + Unit Yksikkö - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2727,7 +2732,7 @@ Tuo CSV-tiedosto - + Export CSV File Vie CSV-tiedosto @@ -2949,47 +2954,47 @@ Window elements - + Survey Tutkimus - + Set description Aseta kuvaus - + Clear Tyhjennä - + Copy Length Kopioi pituus - + Copy Area Copy Area - + Export CSV Vie CSV - + Description Kuvaus - + Area Area - + Total Total @@ -3039,17 +3044,17 @@ Create BuildingPart - + Invalid cutplane Invalid cutplane - + All good! No problems found All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -3204,37 +3209,37 @@ Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3369,42 +3374,42 @@ Successfully imported - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Lisää valitut - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3891,12 +3896,12 @@ Floor creation aborted. Arch_Add - + Add component Lisää osa - + Adds the selected components to the active object Lisää valitut osat Aktiiviseen objektiin @@ -3974,12 +3979,12 @@ Floor creation aborted. Arch_Check - + Check Tarkista - + Checks the selected objects for problems Tarkistaa valitut objektit ongelmien varalta @@ -3987,12 +3992,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Clones an object as an undefined architectural component @@ -4000,12 +4005,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes Sulje reiät - + Closes holes in open shapes, turning them solids Sulkee reijät avoimissa muodoissa tehden niistä monitahokkaita @@ -4013,12 +4018,12 @@ Floor creation aborted. Arch_Component - + Component Component - + Creates an undefined architectural component Creates an undefined architectural component @@ -4177,12 +4182,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Luo IFC laskentataulukko... - + Creates a spreadsheet to store IFC properties of an object. Luo laskentataulukon kohteen IFC-ominaisuuksien tallentamista varten. @@ -4224,12 +4229,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape Verkko Muodolle - + Turns selected meshes into Part Shape objects Muuttaa valitut verkkopinnat Osa Muoto (Part Shape) objekteiksi @@ -4396,12 +4401,12 @@ Floor creation aborted. Arch_Remove - + Remove component Poista osa - + Remove the selected components from their parents, or create a hole in a component Poistaa valitut komponentit vanhemmiltaan tai luo reiän komponentissa @@ -4409,12 +4414,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Muodon poistaminen Arkkitehtuurista - + Removes cubic shapes from Arch components Poistaa kuutiomuodot Arkkitehtuurisista komponenteista @@ -4461,12 +4466,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Valitse ei-moninaiset verkot - + Selects all non-manifold meshes from the document or from the selected groups Valitsee kaikki ei-moninaiset verkot asiakirjasta tai valituista ryhmistä @@ -4505,12 +4510,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh Jaa verkko - + Splits selected meshes into independent components Jakaa valitut verkot riippumattomiin komponentteihin @@ -4539,12 +4544,12 @@ Floor creation aborted. Arch_Survey - + Survey Tutkimus - + Starts survey Aloittaa tutkimuksen @@ -4552,12 +4557,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Näytä tai piilota IFC Brep lippu - + Force an object to be exported as Brep or not Pakota kohde vietäväksi Brep -muodossa tai ei @@ -4565,12 +4570,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents Vaihda alikomponentteja - + Shows or hides the subcomponents of this object Näyttää tai piilottaa tämän objektin alikomponentit diff --git a/src/Mod/Arch/Resources/translations/Arch_fil.qm b/src/Mod/Arch/Resources/translations/Arch_fil.qm index 5a758366b1..2bd06a19ba 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_fil.qm and b/src/Mod/Arch/Resources/translations/Arch_fil.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_fil.ts b/src/Mod/Arch/Resources/translations/Arch_fil.ts index ec4f4da8a3..e31dd681c1 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fil.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fil.ts @@ -574,47 +574,47 @@ Kung mali, ang mga di-solido ay pumutol din, na may posibleng mga maling resulta. - + The display length of this section plane Ang haba ng displey ng seksyon na ito ay patag - + The display height of this section plane Ang haba ng displey ng seksyon na ito ay patag - + The size of the arrows of this section plane Ang sukat ng palaso sa sekyon na ito ay patag - + Show the cut in the 3D view Ipakita ang hiwa sa tatlong dimensyong tanaw - + The rendering mode to use Ang maglalapat sa paraan ng paggamit - + If cut geometry is shown or not Kapag hiniwa ang heometriya ito ba ay magpapakita o hindi - + If cut geometry is filled or not Kapag hiniwa ang heometriya ito ba ay tambak o hindi - + The size of the texts inside this object Ang sukat ng mga teksto sa loob ng bagay na ito - + If checked, source objects are displayed regardless of being visible in the 3D model Kapag tsek, ang pinagmulan ng bagay ay ipamalas ng hindi alintana ang pagiging tatlong dimensyong modelo na nakikita @@ -769,7 +769,7 @@ Ang teksto upang ipakita ay. Gamitin ang $area, $label, $tag, $floor, $walls, $ceiling upang ipasok ang kani kanilang datus - + The name of the font Ang pangalan ng titik @@ -779,7 +779,7 @@ Ang kulay ng lugar ng teksto - + The size of the text font Ang sukat ng teksto ng titik @@ -1039,12 +1039,12 @@ Ang listahan ng mga hanay thicknesses - + The line color of the projected objects Ang kulay ng linya ng inaasahang layunin - + The color of the cut faces (if turned on) Ang kulay ng mga mukha ng cut (kung naka-on) @@ -1219,7 +1219,7 @@ The shape of this object - + The line width of this object The line width of this object @@ -1349,17 +1349,17 @@ The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Show the label in the 3D view @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Anggulo - + is not closed hindi sarado - + is not valid hindi katanggap tanggap - + doesn't contain any solid hindi naglalaman ng kahit solido - + contains a non-closed solid naglalaman ng hindi saradong solido - + contains faces that are not part of any solid naglalaman ng mga anyo na hindi parte ng mga kahit anong solido - + Grouping Pagpapangkat - + Ungrouping Paghihiwalay - + Split Mesh Biak na mesh - + Mesh to Shape Hugis para sa mata @@ -2267,12 +2272,12 @@ matagumpay na pagkakagawa sa payl %s. - + Add space boundary Dagdagan ang hangganan ng espasyo - + Remove space boundary Alisin ang mga hangganan ng espasyo @@ -2357,17 +2362,17 @@ Gumawa ng sistema para sa mga istruktura - + Object doesn't have settable IFC Attributes Ang mga bagay ay walang katangian ng mga sitabol na IFC - + Disabling Brep force flag of object Ipahinto ang puwersa ng brep na bandila sa mga bagay - + Enabling Brep force flag of object Paganahin ang puwersa ng brep na bandila sa mga bagay @@ -2487,7 +2492,7 @@ Taas (mm) - + Create Component Gumawa ng mga sangkap @@ -2512,22 +2517,22 @@ Kategorya - + Key Susi - + Value Halaga - + Unit Unit - + Create IFC properties spreadsheet Gumawa ng katangian ng spreadsheet @@ -2727,7 +2732,7 @@ Mag angkat ng CSV sa hanay - + Export CSV File Mga padala ng mga CSV sa hanay @@ -2949,47 +2954,47 @@ Mga pasimulang aral ng window - + Survey Pagsisiyasat - + Set description Itakda ang paglalarawan - + Clear Malinaw - + Copy Length Kopyahin ang Haba - + Copy Area Kopyahin ang Lugar - + Export CSV -I-luwas ang CSV - + Description Paglalarawan - + Area Laki - + Total Kabuuan @@ -3039,17 +3044,17 @@ Create BuildingPart - + Invalid cutplane Invalid cutplane - + All good! No problems found All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -3204,37 +3209,37 @@ Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3369,42 +3374,42 @@ Matagumpay na naimport - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Idagdag ang mga napili - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3891,12 +3896,12 @@ Floor creation aborted. Arch_Add - + Add component Magdagdag ng mga sangkap - + Adds the selected components to the active object Idagdag ang mga piling sangkap sa mga aktibong bagay @@ -3974,12 +3979,12 @@ Floor creation aborted. Arch_Check - + Check Tsek - + Checks the selected objects for problems Para sa mga problema tsekan ang mga napiling bagay @@ -3987,12 +3992,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component Kopya ng mga sangkap - + Clones an object as an undefined architectural component Gumawa ng kopya ng mga bagay para sa mga arkitektura na sangkap na hindi naipaliwanag @@ -4000,12 +4005,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes Saradong butas - + Closes holes in open shapes, turning them solids Tinatanggal ang mga butas sa bukas na mga hugis, nagiging mga solido @@ -4013,12 +4018,12 @@ Floor creation aborted. Arch_Component - + Component Isa sa bumubuò - + Creates an undefined architectural component Lumilikha ng hindi natukoy na arkitektural na bahagi @@ -4177,12 +4182,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Gumawa ng IFC spreadsyit... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -4224,12 +4229,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape Hugis para sa mata - + Turns selected meshes into Part Shape objects Pagiiba ng napiling mesyes papunta sa bahagi ng mga bagay na hugis @@ -4396,12 +4401,12 @@ Floor creation aborted. Arch_Remove - + Remove component Alisin ang mga sangkap - + Remove the selected components from their parents, or create a hole in a component Alisin ang mga napiling bahagi na mula sa kanilang mga magulang, o gumawa ng butas sa isang bahagi @@ -4409,12 +4414,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Alisin ang mga hugis mula sa arko - + Removes cubic shapes from Arch components Alisin ang mga hugis kubiko mula sa bahagi ng arko @@ -4461,12 +4466,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Pumili ng hindi maraming mesyes - + Selects all non-manifold meshes from the document or from the selected groups Piliin ang lahat ng hindi maraming mesyes na mula sa dokumento o mula sa mga napiling grupo @@ -4505,12 +4510,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh Biak na mesh - + Splits selected meshes into independent components Pagkakahati sa mga napiling meshes patungo sa pagkakahiwalay na mga bahagi @@ -4539,12 +4544,12 @@ Floor creation aborted. Arch_Survey - + Survey Pagsisiyasat - + Starts survey Simulan ang pagsisiyasat @@ -4552,12 +4557,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag I-tagel ang IFC at brep na watawat - + Force an object to be exported as Brep or not Pwersahin ang mga bagay upang mapalabas bilang brep o kaya ay hindi @@ -4565,12 +4570,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents I-tagel ang iba't ibang bahagi - + Shows or hides the subcomponents of this object Ipakita o itago ang mga iba't ibang bahagi ng mga bagay na ito diff --git a/src/Mod/Arch/Resources/translations/Arch_fr.qm b/src/Mod/Arch/Resources/translations/Arch_fr.qm index 78bd4dab3e..a661d8ad8e 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_fr.qm and b/src/Mod/Arch/Resources/translations/Arch_fr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_fr.ts b/src/Mod/Arch/Resources/translations/Arch_fr.ts index 91e98731f9..37ad275fac 100644 --- a/src/Mod/Arch/Resources/translations/Arch_fr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_fr.ts @@ -574,47 +574,47 @@ Si « false », les éléments non pleins seront également coupés, avec de possibles mauvais résultats. - + The display length of this section plane La longueur d'affichage de ce plan de coupe - + The display height of this section plane La hauteur affichée de ce plan de coupe - + The size of the arrows of this section plane La taille des flèches de ce plan de coupe - + Show the cut in the 3D view Montrer la coupe dans la vue 3D - + The rendering mode to use Le mode de rendu à utiliser - + If cut geometry is shown or not Si la géométrie de la coupe est affichée ou non - + If cut geometry is filled or not Si la géométrie de la coupe est remplie ou non - + The size of the texts inside this object La taille des textes à l’intérieur de cet objet - + If checked, source objects are displayed regardless of being visible in the 3D model Si cochée, les objets source sont affichés quelle que soit leur visibilité dans le modèle 3D @@ -769,7 +769,7 @@ Le texte à afficher. Utilisez $area, $label, $tag, $floor, $walls, $ceiling pour insérer les données respectives - + The name of the font Le nom de la police @@ -779,7 +779,7 @@ La couleur de la zone de texte - + The size of the text font La taille de la police de texte @@ -1039,12 +1039,12 @@ La liste des épaisseurs de couche - + The line color of the projected objects La couleur de la ligne des objets projetés - + The color of the cut faces (if turned on) La couleur des faces coupées (si activé) @@ -1219,7 +1219,7 @@ La forme de cet objet - + The line width of this object La largeur de la ligne des objets @@ -1349,17 +1349,17 @@ Les objets qui doivent être pris en compte par ce plan de coupe. Vide signifie tous les objets du document. - + The transparency of this object La transparence de cet objet - + The color of this object La couleur de cet objet - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) La distance entre le plan de coupe et de la vue réelle coupé (cela garde une valeur très faible mais pas nulle) @@ -1989,7 +1989,7 @@ Spécifie si le sens du toit doit être inversé - + Show the label in the 3D view Afficher le libellé dans la vue 3D @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length Si différent de zéro, les axes ne sont pas représentés comme une ligne complète, mais comme deux lignes de la longueur donnée + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Angle - + is not closed n'est pas fermé - + is not valid n'est pas valide - + doesn't contain any solid ne contient aucun solide - + contains a non-closed solid contient un solide non fermé - + contains faces that are not part of any solid contient des faces qui ne font pas partie d'un solide - + Grouping Regroupement - + Ungrouping Dégroupement - + Split Mesh Diviser un maillage - + Mesh to Shape Maillage vers Forme @@ -2267,12 +2272,12 @@ Le fichier %s a été correctement créé. - + Add space boundary Ajouter une frontière spatiale - + Remove space boundary Enlever une frontière spatiale @@ -2357,17 +2362,17 @@ Créer un système structurel - + Object doesn't have settable IFC Attributes L'objet n'a pas d'Attributs IFC définissables - + Disabling Brep force flag of object Désactivation du marqueur de forçage Brep de l'objet - + Enabling Brep force flag of object Activation du marqueur de forçage Brep de l'objet @@ -2487,7 +2492,7 @@ Hauteur (mm) - + Create Component Créer un composant @@ -2512,22 +2517,22 @@ Catégorie - + Key Clé - + Value Valeur - + Unit Unité - + Create IFC properties spreadsheet Création d'une feuille de calcul de propriétés Ifc @@ -2727,7 +2732,7 @@ Importer un fichier CSV - + Export CSV File Exporter vers un fichier CSV @@ -2949,47 +2954,47 @@ Éléments de la fenêtre - + Survey Prise de cotes - + Set description Rédigez une description - + Clear Effacer - + Copy Length Copier la longueur - + Copy Area Copier la surface - + Export CSV Exporter CSV - + Description Description - + Area Surface - + Total Total @@ -3039,17 +3044,17 @@ Créer une Partie de bâtiment - + Invalid cutplane Plan de coupe non valide - + All good! No problems found Tout est bon ! Aucun problème trouvé - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: L'objet ne possède pas l'attribut IfcProperties. Annuler la création de la feuille de calcul pour l'objet: @@ -3204,37 +3209,37 @@ Créer une référence externe - + Section plane settings Réglage du plan de coupe - + Objects seen by this section plane: Objets vus dans ce plan de coupe : - + Section plane placement: Emplacement du plan de coupe : - + Rotate X Rotation X - + Rotate Y Rotation Y - + Rotate Z Rotation Z - + Resize Redimensionner @@ -3369,42 +3374,42 @@ Importé avec succès - + Remove highlighted objects from the list above Supprimer les objets en surbrillance de la liste ci-dessus - + Add selected Ajouter la sélection - + Add selected object(s) to the scope of this section plane Ajouter un(des) objet(s) sélectionné(s) au champ d'application de ce plan de coupe - + Rotates the plane along the X axis Rotation du plan autour de l'axe X - + Rotates the plane along the Y axis Rotation du plan autour de l'axe Y - + Rotates the plane along the Z axis Rotation du plan autour de l'axe Z - + Resizes the plane to fit the objects in the list above Redimensionner le plan pour l'adapter aux objets de la liste ci-dessus - + Centers the plane on the objects in the list above Centrer le plan sur les objets de la liste ci-dessus @@ -3881,12 +3886,12 @@ Création d'étage abandonnée. Arch_Add - + Add component Ajouter un composant - + Adds the selected components to the active object Ajoute les composants sélectionnés à l'objet actif @@ -3964,12 +3969,12 @@ Création d'étage abandonnée. Arch_Check - + Check Vérifier - + Checks the selected objects for problems Vérifie si les objets sélectionnés présentent un problème @@ -3977,12 +3982,12 @@ Création d'étage abandonnée. Arch_CloneComponent - + Clone component Composant de clone - + Clones an object as an undefined architectural component Clone un objet comme un élément architectural indéfini @@ -3990,12 +3995,12 @@ Création d'étage abandonnée. Arch_CloseHoles - + Close holes Fermer les trous - + Closes holes in open shapes, turning them solids Convertit les formes ouvertes en solides, en fermant leurs trous @@ -4003,12 +4008,12 @@ Création d'étage abandonnée. Arch_Component - + Component Composant - + Creates an undefined architectural component Crée un élément architectural non défini @@ -4167,12 +4172,12 @@ Création d'étage abandonnée. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Créer une feuille de calcul Ifc... - + Creates a spreadsheet to store IFC properties of an object. Crée une feuille de calcul pour stocker les propriétés IFC d'un objet. @@ -4214,12 +4219,12 @@ Création d'étage abandonnée. Arch_MeshToShape - + Mesh to Shape Maillage vers Forme - + Turns selected meshes into Part Shape objects Transforme les maillages sélectionnées en formes @@ -4386,12 +4391,12 @@ Création d'étage abandonnée. Arch_Remove - + Remove component Enlever une composante - + Remove the selected components from their parents, or create a hole in a component Retirer les composants sélectionnés de leurs parents, ou créer un trou dans un composant @@ -4399,12 +4404,12 @@ Création d'étage abandonnée. Arch_RemoveShape - + Remove Shape from Arch Supprimer la forme - + Removes cubic shapes from Arch components Supprime les formes cubiques des composants Arch @@ -4451,12 +4456,12 @@ Création d'étage abandonnée. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Sélectionner les maillages non-manifold - + Selects all non-manifold meshes from the document or from the selected groups Sélectionne tous les maillages non-manifold du document ou des groupes sélectionnés @@ -4495,12 +4500,12 @@ Création d'étage abandonnée. Arch_SplitMesh - + Split Mesh Diviser une maille - + Splits selected meshes into independent components Divise les maillages sélectionnés en composantes indépendantes @@ -4529,12 +4534,12 @@ Création d'étage abandonnée. Arch_Survey - + Survey Prise de cotes - + Starts survey Prise de côtes @@ -4542,12 +4547,12 @@ Création d'étage abandonnée. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Activer/désactiver le marqueur Brep IFC - + Force an object to be exported as Brep or not Force (ou non) un objet à être exporté en tant que Brep @@ -4555,12 +4560,12 @@ Création d'étage abandonnée. Arch_ToggleSubs - + Toggle subcomponents Activer/désactiver sous-composants - + Shows or hides the subcomponents of this object Affiche ou masque les sous-composants de cet objet diff --git a/src/Mod/Arch/Resources/translations/Arch_gl.qm b/src/Mod/Arch/Resources/translations/Arch_gl.qm index b57157305d..23d21285f4 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_gl.qm and b/src/Mod/Arch/Resources/translations/Arch_gl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_gl.ts b/src/Mod/Arch/Resources/translations/Arch_gl.ts index a65dcac112..e43f816d08 100644 --- a/src/Mod/Arch/Resources/translations/Arch_gl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_gl.ts @@ -574,47 +574,47 @@ Se é falso, os non-sólidos serán cortados tamén, con posibles resultados errados. - + The display length of this section plane A lonxitude visualizada deste plano de corte - + The display height of this section plane A altura visualizada deste plano de corte - + The size of the arrows of this section plane O tamaño das frechas deste plano de corte - + Show the cut in the 3D view Amosar o corte na visualización 3D - + The rendering mode to use O xeito de renderización para usar - + If cut geometry is shown or not Se se amosa ou non a xeometría do corte - + If cut geometry is filled or not Se se enche ou non a xeometría do corte - + The size of the texts inside this object O tamaño dos textos dentro deste obxecto - + If checked, source objects are displayed regardless of being visible in the 3D model Se é marcada, os obxectos de orixe amósanse independentemente de seren visibles no modelo 3D @@ -769,7 +769,7 @@ O texto para amosar. Use $area, $label, $tag, $floor, $walls, $ceiling para introducir os datos respectivos - + The name of the font O nome da fonte @@ -779,7 +779,7 @@ A cor da área de texto - + The size of the text font O tamaño da fonte do texto @@ -1039,12 +1039,12 @@ Lista dos grosores de capa - + The line color of the projected objects Cor de liña dos obxectos proxectados - + The color of the cut faces (if turned on) Cor das caras talladas (se está activado) @@ -1219,7 +1219,7 @@ A forma desde obxecto - + The line width of this object Largura da lixa desde obxecto @@ -1349,17 +1349,17 @@ Os obxectos que deben ser considerados por este plano de corte. Baleiro significa todo o documento. - + The transparency of this object A transparencia deste obxecto - + The color of this object A cor deste obxecto - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) A distancia entre o plano de corte mais a vista actual de corte (mantén isto nun valor baixo pero non cero) @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Show the label in the 3D view @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Ángulo - + is not closed non está pechada - + is not valid non é válido - + doesn't contain any solid non contén ningún sólido - + contains a non-closed solid contén un sólido non pechado - + contains faces that are not part of any solid contén caras que non son parte de ningún sólido - + Grouping Agrupar - + Ungrouping Desagrupar - + Split Mesh Dividir Malla - + Mesh to Shape Malla para Forma @@ -2267,12 +2272,12 @@ ficheiro %s creado con éxito. - + Add space boundary Engadir límite do espazo - + Remove space boundary Desbotar límite do espazo @@ -2357,17 +2362,17 @@ Crear sistema estrutural - + Object doesn't have settable IFC Attributes O obxecto non ten atributos IFC que se poidan configurar - + Disabling Brep force flag of object Desactivar o indicador de forzado Brep do obxecto - + Enabling Brep force flag of object Activar o indicador de forzado Brep do obxecto @@ -2487,7 +2492,7 @@ Altura (mm) - + Create Component Crear compoñente @@ -2512,22 +2517,22 @@ Categoría - + Key Chave - + Value Valor - + Unit Unidade - + Create IFC properties spreadsheet Crear a folla de cálculo de propiedades IFC @@ -2727,7 +2732,7 @@ Importar ficheiro CSV - + Export CSV File Exportar ficheiro CSV @@ -2949,47 +2954,47 @@ Elementos da fiestra - + Survey Colleita de datos - + Set description Descrición do conxunto - + Clear Baleirar - + Copy Length Copiar Lonxitude - + Copy Area Copiar Área - + Export CSV Exportar CSV - + Description Descrición - + Area Área - + Total Total @@ -3039,17 +3044,17 @@ Crear BuildingPart - + Invalid cutplane Plano de corte inválido - + All good! No problems found Todo ben! Non se atoparon problemas - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: O obxecto non ten o atributo IfcProperties. Cancelar a creación de follas de cálculo para o obxecto: @@ -3204,37 +3209,37 @@ Crear referencia externa - + Section plane settings Axustes do plano de corte - + Objects seen by this section plane: Obxectos vistos por este plano de corte: - + Section plane placement: Situación do Plano de corte: - + Rotate X Rotar X - + Rotate Y Rotar Y - + Rotate Z Rotar Z - + Resize Redimensionar @@ -3369,42 +3374,42 @@ Importados con éxito - + Remove highlighted objects from the list above Remover obxectos destacados dende a lista de enriba - + Add selected Engadir escolma - + Add selected object(s) to the scope of this section plane Engadir obxecto(s) escolmados ao ámbito de aplicación deste plano de sección - + Rotates the plane along the X axis Rotar o plano ao longo do eixe X - + Rotates the plane along the Y axis Rotar o plano ao longo do eixe Y - + Rotates the plane along the Z axis Rotar o plano ao longo do eixe Z - + Resizes the plane to fit the objects in the list above Redimensiona o plano para que os obxectos da lista de enriba collan - + Centers the plane on the objects in the list above Centra o plano na lista de obxectos de enriba @@ -3891,12 +3896,12 @@ Floor creation aborted. Arch_Add - + Add component Engadir compoñente - + Adds the selected components to the active object Engade os compoñentes escolmados para o obxecto activo @@ -3974,12 +3979,12 @@ Floor creation aborted. Arch_Check - + Check Comprobar - + Checks the selected objects for problems Verifica os obxectos escolmados para ver se hai problemas @@ -3987,12 +3992,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component Clonar compoñente - + Clones an object as an undefined architectural component Clona un obxecto coma un compoñente arquitectónico indefinido @@ -4000,12 +4005,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes Pechar furados - + Closes holes in open shapes, turning them solids Pecha furados en formas abertas, tornándoos en sólidos @@ -4013,12 +4018,12 @@ Floor creation aborted. Arch_Component - + Component Compoñente - + Creates an undefined architectural component Crea un compoñente arquitectónico indeterminado @@ -4177,12 +4182,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Crea unha folla de cálculo IFC... - + Creates a spreadsheet to store IFC properties of an object. Crea unha folla de cálculo para almacenar as propiedades Ifc dun obxecto. @@ -4224,12 +4229,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape Malla para Forma - + Turns selected meshes into Part Shape objects Torna as mallas escolmadas en obxectos Forma de Peza @@ -4396,12 +4401,12 @@ Floor creation aborted. Arch_Remove - + Remove component Rexeitar compoñente - + Remove the selected components from their parents, or create a hole in a component Desbota os compoñentes escolmados dos seus pais, ou fai un furado nun compoñente @@ -4409,12 +4414,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Rexeitar Forma de Arquitectura - + Removes cubic shapes from Arch components Desbota formas cúbicas de compoñentes Arquitectónicos @@ -4461,12 +4466,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Escolmar mallas non-múltiples - + Selects all non-manifold meshes from the document or from the selected groups Escolma tódalas mallas non múltiples do documento ou dos grupos escolmados @@ -4505,12 +4510,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh Dividir Malla - + Splits selected meshes into independent components Divide as mallas escolmadas en compoñentes independentes @@ -4539,12 +4544,12 @@ Floor creation aborted. Arch_Survey - + Survey Colleita de datos - + Starts survey Arrinca a colleita de datos @@ -4552,12 +4557,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Alternar marcador IFC Brep - + Force an object to be exported as Brep or not Forza un obxecto a ser exportado como Brep ou non @@ -4565,12 +4570,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents Alternar sub-compoñentes - + Shows or hides the subcomponents of this object Amosa ou agocha os sub-compoñentes deste obxecto diff --git a/src/Mod/Arch/Resources/translations/Arch_hr.qm b/src/Mod/Arch/Resources/translations/Arch_hr.qm index 369108923d..74b2225d4e 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_hr.qm and b/src/Mod/Arch/Resources/translations/Arch_hr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_hr.ts b/src/Mod/Arch/Resources/translations/Arch_hr.ts index 59860e3ba3..415cb79fb2 100644 --- a/src/Mod/Arch/Resources/translations/Arch_hr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_hr.ts @@ -574,47 +574,47 @@ Ako je netočno, ne krute tvari će se rezati također, s moguće lošim rezultatom. - + The display length of this section plane Dužina prikaza ovog djela ravni - + The display height of this section plane Visina prikaza ovog djela ravni - + The size of the arrows of this section plane Veličina strelica ovog dijela ravni - + Show the cut in the 3D view Prikaži presjek u 3D pogledu - + The rendering mode to use Mod iscrtavanja koji se koristi - + If cut geometry is shown or not Da li je geometrija rezanja prikazana ili ne - + If cut geometry is filled or not Da li je geometrija rezanja ispunjena ili ne - + The size of the texts inside this object Veličina tekstova unutar ovog objekta - + If checked, source objects are displayed regardless of being visible in the 3D model Ako je označeno, izvorni objekti prikazuju se bez obzira jesu li vidljivi u 3D modelu @@ -769,7 +769,7 @@ Tekst za prikaz. Koristi $area, $label, $tag, $floor, $walls, $ceiling za umetanje odgovarajućih podataka - + The name of the font Ime pisma @@ -779,7 +779,7 @@ Boja područja teksta - + The size of the text font Veličina pisma teksta @@ -1039,12 +1039,12 @@ Lista debljina slojeva - + The line color of the projected objects Boja linije projiciranih objekata - + The color of the cut faces (if turned on) Boja za lice rezanja (ako je uključeno) @@ -1219,7 +1219,7 @@ Oblik ovog objekta - + The line width of this object Debljina linije ovog objekta @@ -1349,17 +1349,17 @@ Objekti koji se razmatraju po dijelu ravni. Prazno znači čitav dokument. - + The transparency of this object Prozirnost ovog objekta - + The color of this object Boja ovog objekta - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Udaljenost između ravnine rezanja i aktualnog pogleda rezanja (mala vrijednost ali ne nula) @@ -2022,7 +2022,7 @@ - + Show the label in the 3D view Prikaži oznaku u 3D pogledu @@ -2071,6 +2071,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2120,47 +2125,47 @@ Kut - + is not closed nije zatvoren - + is not valid nije valjano - + doesn't contain any solid ne sadrži niti jedno čvrsto tijelo - + contains a non-closed solid Sadrži otvoreno čvrsto tijelo - + contains faces that are not part of any solid sadrži površine koje nisu dio niti jednog tijela - + Grouping Grupiranje - + Ungrouping Razgrupiranje - + Split Mesh Podijeli Mesh - + Mesh to Shape Mesh u oblik @@ -2300,12 +2305,12 @@ datoteka %s je uspješno izrađena. - + Add space boundary Dodavanje granice prostora - + Remove space boundary Uklanjanje granice prostora @@ -2390,17 +2395,17 @@ Pravljenje Strukturnih sustava - + Object doesn't have settable IFC Attributes Objekt nema IFC atribute - + Disabling Brep force flag of object Onemogućiti Brep oznaku sile objekta - + Enabling Brep force flag of object Omogućiti Brep oznaku sile objekta @@ -2520,7 +2525,7 @@ Visina (mm) - + Create Component Izradi komponentu @@ -2545,22 +2550,22 @@ Kategorija - + Key Ključ - + Value Vrijednost - + Unit Jedinica - + Create IFC properties spreadsheet Izradi IFC tablice svojstva @@ -2760,7 +2765,7 @@ Uvoz CSV datoteke - + Export CSV File Izvoz CSV datoteke @@ -2982,47 +2987,47 @@ Elementi prozora - + Survey Istraživanje - + Set description Postavi opis - + Clear Brisanje - + Copy Length Kopira dužinu - + Copy Area Područje kopiranja - + Export CSV Izvoz CSV - + Description Opis - + Area Područje - + Total Ukupno @@ -3072,17 +3077,17 @@ Kreiraj Ugradni dio - + Invalid cutplane Pogrešna ravnina rezanja - + All good! No problems found Sve u redu! Nema problema - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Objekt nema atribut IfcProperties. Prekinuto stvaranje proračunske tablice za objekt: @@ -3237,37 +3242,37 @@ Stvaranje vanjske reference - + Section plane settings Postavke odsječka ravni - + Objects seen by this section plane: Objekti viđeni sa ovog djela ravni: - + Section plane placement: Položaj odsječka ravni: - + Rotate X Rotiraj X - + Rotate Y Rotiraj Y - + Rotate Z Rotiraj Z - + Resize Promjena veličine @@ -3402,42 +3407,42 @@ Uspješno uvezen - + Remove highlighted objects from the list above Ukloni istaknute objekte sa liste iznad - + Add selected Dodaj odabrano - + Add selected object(s) to the scope of this section plane Dodajte odabrane objekte u područje ovog djela ravni - + Rotates the plane along the X axis Rotiraj ravninu uzduž X osi - + Rotates the plane along the Y axis Rotiraj ravninu uzduž Y osi - + Rotates the plane along the Z axis Rotiraj ravninu uzduž Z osi - + Resizes the plane to fit the objects in the list above Promijeni veličinu ravnine radi postavljanja objekata na gornji popis - + Centers the plane on the objects in the list above Centrira ravninu na objekte na gornjem popisu @@ -3936,12 +3941,12 @@ Floor creation aborted. Arch_Add - + Add component Dodaj komponentu - + Adds the selected components to the active object Dodaje odabrane komponente aktivnom objektu @@ -4019,12 +4024,12 @@ Floor creation aborted. Arch_Check - + Check Provjeri - + Checks the selected objects for problems Provjerava probleme na selektiranim objektima @@ -4032,12 +4037,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component Kloniraj komponentu - + Clones an object as an undefined architectural component Klonira objekt kao nedefiniranu arhitektonsku komponentu @@ -4045,12 +4050,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes Zatvori rupe - + Closes holes in open shapes, turning them solids Zatvara rupe u otvorenim oblicima i pretvara ih u 3D tijela @@ -4058,12 +4063,12 @@ Floor creation aborted. Arch_Component - + Component Komponenta - + Creates an undefined architectural component Stvara nedefiniranu graditeljsku komponentu @@ -4222,12 +4227,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Stvaranje IFC proračunske tablice... - + Creates a spreadsheet to store IFC properties of an object. Stvara proračunsku tablicu za spremanje IFC svojstava objekta. @@ -4269,12 +4274,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape Mesh u oblik - + Turns selected meshes into Part Shape objects Pretvara odabrane mreže u čvrste dijelove @@ -4441,12 +4446,12 @@ Floor creation aborted. Arch_Remove - + Remove component Ukloni komponentu - + Remove the selected components from their parents, or create a hole in a component Ukloni odabrane komponente iz njihovih roditelja, ili stvori rupu u komponenti @@ -4454,12 +4459,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Ukloni oblik iz Arhitekta - + Removes cubic shapes from Arch components Uklanja prostorne oblike iz komponenti Arhitekt @@ -4506,12 +4511,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Odaberite jednostruke MESH-eve - + Selects all non-manifold meshes from the document or from the selected groups Odabire sve jednostruke MESH-eve iz dokumenta ili iz odabrane grupe @@ -4550,12 +4555,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh Podijeli Mesh - + Splits selected meshes into independent components Dijeli odabrane MESH-eve u nezavisne komponente @@ -4584,12 +4589,12 @@ Floor creation aborted. Arch_Survey - + Survey Istraživanje - + Starts survey Počinje istraživanje @@ -4597,12 +4602,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Uključi/isključi IFC Brep oznaku - + Force an object to be exported as Brep or not Nametni da li će objekt biti izvežen kao Brep ili neće @@ -4610,12 +4615,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents Uključivanje/isključivanje podsastavnice - + Shows or hides the subcomponents of this object Prikazuje ili skriva podsastavnice ovoga objekta diff --git a/src/Mod/Arch/Resources/translations/Arch_hu.qm b/src/Mod/Arch/Resources/translations/Arch_hu.qm index 77c67985df..c8d87a19fe 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_hu.qm and b/src/Mod/Arch/Resources/translations/Arch_hu.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_hu.ts b/src/Mod/Arch/Resources/translations/Arch_hu.ts index 20e720b99e..af525997a5 100644 --- a/src/Mod/Arch/Resources/translations/Arch_hu.ts +++ b/src/Mod/Arch/Resources/translations/Arch_hu.ts @@ -574,47 +574,47 @@ Ha hamis, nem szilárd testeket is elvág, lehetséges rossz eredménnyel. - + The display length of this section plane A metszősík megjelenítési hossza - + The display height of this section plane A metszősík megjelenítési magassága - + The size of the arrows of this section plane Metszősík nyilainak a nagysága - + Show the cut in the 3D view A vágás 3D-s nézetének megjelenítése - + The rendering mode to use A használandó igazító mód - + If cut geometry is shown or not Ha a levágott geometria megjelenik vagy sem - + If cut geometry is filled or not Ha a levágott geometria kitöltött vagy sem - + The size of the texts inside this object A szöveg vastagsága ebben az objektumban - + If checked, source objects are displayed regardless of being visible in the 3D model Ha be van jelölve, a forrásobjektumok megjelenik függetlenül attól, hogy látható legyen, a 3D-s modellben @@ -769,7 +769,7 @@ A szöveg megjelenítéséhez. $area, $label, $tag, $floor, $walls, $ceiling segítségével illessze be a megfelelő adatokat - + The name of the font Betűtípus neve @@ -779,7 +779,7 @@ A terület szöveg színe - + The size of the text font A betűtípus mérete @@ -1039,12 +1039,12 @@ A réteg vastagságok listája - + The line color of the projected objects A vetített objektumok vonal színe - + The color of the cut faces (if turned on) Vágott felületek színe (ha be van kapcsolva) @@ -1219,7 +1219,7 @@ Ennek a tárgynak az alakja - + The line width of this object Ennek a tárgynak a vonalvastagsága @@ -1349,17 +1349,17 @@ Objektum a metszés nézethez. Üresen hagyva az egész dokumentumot jelenti. - + The transparency of this object Ennek a tárgynak az átláthatósága - + The color of this object Ennek a tárgynak a színe - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) A tényleges vágás és a kivágási sík közötti távolság (hagyja nagyon kis méretűre, de ne legyen nulla) @@ -1989,7 +1989,7 @@ Megadja, hogy a tető irányát tükrözni kell-e - + Show the label in the 3D view A címke megjelenítése 3D nézetben @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length Ha nem nulla, akkor a tengelyek nem egy teljes vonalként, hanem az adott hossz két vonalaként ábrázoltak + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Szög - + is not closed nincs lezárva - + is not valid Érvénytelen - + doesn't contain any solid nem tartalmazhat semmilyen szilárd testet - + contains a non-closed solid le nem zárt szilárd testet tartalmaz - + contains faces that are not part of any solid tartalmaz felületet, amelyek nem tartoznak semmilyen szilárd testhez - + Grouping Csoportosítás - + Ungrouping Csoportbontás - + Split Mesh Háló felosztása - + Mesh to Shape Hálókat alakzatokká @@ -2267,12 +2272,12 @@ a program sikeresen létrehozta a %s fájl. - + Add space boundary Hely határvonal hozzáadása - + Remove space boundary Távolítsa el a hely határvonalán @@ -2357,17 +2362,17 @@ Szerkezeti rendszer létrehozása - + Object doesn't have settable IFC Attributes Objektum nem rendelkezik beállítható IFC-jellemzőkkel - + Disabling Brep force flag of object Brep erő zászló letiltása a tárgyon - + Enabling Brep force flag of object Brep erő jelző engedélyezése a tárgyon @@ -2487,7 +2492,7 @@ Magasság (mm) - + Create Component Összetevő létrehozás @@ -2512,22 +2517,22 @@ Kategória - + Key Kulcs - + Value Érték - + Unit Egység - + Create IFC properties spreadsheet IFC tulajdonság számolótábla létrehozása @@ -2727,7 +2732,7 @@ CSV fájl importálás - + Export CSV File CSV fájl exportálás @@ -2949,47 +2954,47 @@ Ablak elemek - + Survey Felmérés - + Set description Leírás megadása - + Clear Törlés - + Copy Length Másolás hossza - + Copy Area Másolási terület - + Export CSV Exportálás CSV-be - + Description Leírás - + Area Terület - + Total Összesen @@ -3039,17 +3044,17 @@ Épületrész létrehozása - + Invalid cutplane Érvénytelen kivágási síkfelület - + All good! No problems found Minden jó! nincs probléma - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Az objektum nem rendelkezik IfcProperties attribútummal. Mégse hozzon létre számolótáblát ehhez az objektumhoz: @@ -3204,37 +3209,37 @@ Külső hivatkozás készítése - + Section plane settings Metszősík beállítások - + Objects seen by this section plane: Metszősík által látható tárgyak: - + Section plane placement: Metszősík elhelyezése: - + Rotate X Forgatás X - + Rotate Y Forgatás Y - + Rotate Z Forgatás Z - + Resize Átméretezés @@ -3369,42 +3374,42 @@ Sikeresen importálva - + Remove highlighted objects from the list above Kijelölt elemek eltávolítása a fenti listából - + Add selected Kiválasztott hozzáadása - + Add selected object(s) to the scope of this section plane Kijelölt elem(ek) hozzáadása a metszősík hatóköréhez - + Rotates the plane along the X axis Sík forgatása az X tengely körül - + Rotates the plane along the Y axis Sík forgatása az Y tengely körül - + Rotates the plane along the Z axis Sík forgatása a Z tengely körül - + Resizes the plane to fit the objects in the list above Sík átméretezése a fenti listában szereplő elemekre - + Centers the plane on the objects in the list above Sík középpontja a fenti listában szereplő elemeken @@ -3891,12 +3896,12 @@ Szint létrehozása megszakítva. Arch_Add - + Add component Összetevő hozzáadása - + Adds the selected components to the active object A kijelölt összetevőket hozzáadja az aktív objektumhoz @@ -3974,12 +3979,12 @@ Szint létrehozása megszakítva. Arch_Check - + Check Ellenőrzés - + Checks the selected objects for problems Ellenőrzi a kijelölt objektumok problémáit @@ -3987,12 +3992,12 @@ Szint létrehozása megszakítva. Arch_CloneComponent - + Clone component Összetevő klónozása - + Clones an object as an undefined architectural component Klónoz egy objektumot egy nem definiált építészeti összetevőként @@ -4000,12 +4005,12 @@ Szint létrehozása megszakítva. Arch_CloseHoles - + Close holes Furatok bezárása - + Closes holes in open shapes, turning them solids Bezárja a nyitott alakzatokat, szilárd testé változtatja azokat @@ -4013,12 +4018,12 @@ Szint létrehozása megszakítva. Arch_Component - + Component Összetevő - + Creates an undefined architectural component Létrehoz egy meghatározatlan építészeti összetevőt @@ -4177,12 +4182,12 @@ Szint létrehozása megszakítva. Arch_IfcSpreadsheet - + Create IFC spreadsheet... IFC számolótábla létrehozása... - + Creates a spreadsheet to store IFC properties of an object. Készít egy számolótáblát egy objektum ifc tulajdonságainak tárolására. @@ -4224,12 +4229,12 @@ Szint létrehozása megszakítva. Arch_MeshToShape - + Mesh to Shape Hálókat alakzatokká - + Turns selected meshes into Part Shape objects A kiválasztott hálókat alakzat objektumokká alakítja @@ -4396,12 +4401,12 @@ Szint létrehozása megszakítva. Arch_Remove - + Remove component Összetevő törlése - + Remove the selected components from their parents, or create a hole in a component A kijelölt alkatrészek eltávolítása a szülőktől, vagy egy lyuk létrehozása alkatrészen @@ -4409,12 +4414,12 @@ Szint létrehozása megszakítva. Arch_RemoveShape - + Remove Shape from Arch Alakzat elhagyása az Építészet-ből - + Removes cubic shapes from Arch components Eltávolítja a harmadfokú alakzatokat az Arch alkatrészekből @@ -4461,12 +4466,12 @@ Szint létrehozása megszakítva. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Válassza ki a nem-sokrétű hálózatot - + Selects all non-manifold meshes from the document or from the selected groups Kiválasztja az összes nem-sokrétű hálózatot a dokumentumból vagy a kijelölt csoportokból @@ -4505,12 +4510,12 @@ Szint létrehozása megszakítva. Arch_SplitMesh - + Split Mesh Háló felosztása - + Splits selected meshes into independent components A kiválasztott hálót független összetevőkre osztja @@ -4539,12 +4544,12 @@ Szint létrehozása megszakítva. Arch_Survey - + Survey Felmérés - + Starts survey Felmérés indítása @@ -4552,12 +4557,12 @@ Szint létrehozása megszakítva. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag IFC Brep jelölő zászló - + Force an object to be exported as Brep or not Erőltessen egy tárgyat Brep exportálásra vagy sem @@ -4565,12 +4570,12 @@ Szint létrehozása megszakítva. Arch_ToggleSubs - + Toggle subcomponents Al-összetevők ki-/ bekapcsolása - + Shows or hides the subcomponents of this object Megjeleníti vagy elrejti ennek az objektumnak az al-összetevőit diff --git a/src/Mod/Arch/Resources/translations/Arch_id.qm b/src/Mod/Arch/Resources/translations/Arch_id.qm index 63e323b996..f43e33098c 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_id.qm and b/src/Mod/Arch/Resources/translations/Arch_id.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_id.ts b/src/Mod/Arch/Resources/translations/Arch_id.ts index 4d80f01d32..f69592fcc7 100644 --- a/src/Mod/Arch/Resources/translations/Arch_id.ts +++ b/src/Mod/Arch/Resources/translations/Arch_id.ts @@ -574,47 +574,47 @@ Jika salah, non-padat akan dipotong juga, dengan kemungkinan hasil yang salah. - + The display length of this section plane Panjang tampilan bidang bagian ini - + The display height of this section plane Tinggi tampilan bidang bagian ini - + The size of the arrows of this section plane Ukuran panah bidang bagian ini - + Show the cut in the 3D view Menunjukkan potongan dalam tampilan 3D - + The rendering mode to use Mode penyiapan yang dipakai - + If cut geometry is shown or not Jika potongan geometri digunakan atau tidak - + If cut geometry is filled or not Jika potongan geometri diisi atau tidak - + The size of the texts inside this object Ukuran teks didalam objek ini - + If checked, source objects are displayed regardless of being visible in the 3D model Kalau dicentang, sumber objek ditampilkan tanpa memperhatikan untuk menjadi tampil dalam model 3D @@ -769,7 +769,7 @@ Teks ini untuk menunjukkan penggunaan $area, $label, $tag, $floor, $walls, $ceiling untuk memasukkan data masing-masing - + The name of the font Nama font @@ -779,7 +779,7 @@ Warna teks area - + The size of the text font Ukuran teksnya @@ -1039,12 +1039,12 @@ Daftar dari lapisan ketebalan - + The line color of the projected objects Warna garis benda-benda yang diproyeksikan - + The color of the cut faces (if turned on) Warna permukaan potong (jika diaktifkan) @@ -1219,7 +1219,7 @@ Bentuk dari objek ini - + The line width of this object Tebal gari dari objek ini @@ -1349,17 +1349,17 @@ The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object Transparansi objek ini - + The color of this object Warna objek ini - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Show the label in the 3D view @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Sudut - + is not closed is not closed - + is not valid is not valid - + doesn't contain any solid doesn't contain any solid - + contains a non-closed solid contains a non-closed solid - + contains faces that are not part of any solid contains faces that are not part of any solid - + Grouping Grouping - + Ungrouping Ungrouping - + Split Mesh Split Mesh - + Mesh to Shape Mesh ke Bentuk @@ -2267,12 +2272,12 @@ %s file berhasil dibuat. - + Add space boundary Tambahkan pembatas ruang - + Remove space boundary Hapus pembatas ruang @@ -2357,17 +2362,17 @@ Buat Sistem Struktural - + Object doesn't have settable IFC Attributes Objek tidak memiliki atribut IFC yang dapat disetel - + Disabling Brep force flag of object Menonaktifkan bendera gaya Brep objek - + Enabling Brep force flag of object Mengaktifkan kekuatan bendera gaya Brep @@ -2487,7 +2492,7 @@ Tinggi (mm) - + Create Component Buat Komponen @@ -2512,22 +2517,22 @@ Kategori - + Key Kunci - + Value Nilai - + Unit Satuan - + Create IFC properties spreadsheet Buat spreadsheet properti IFC @@ -2727,7 +2732,7 @@ Impor File CSV - + Export CSV File Ekspor File CSV @@ -2949,47 +2954,47 @@ Elemen jendela - + Survey Survei - + Set description Tetapkan deskripsi - + Clear Bersih - + Copy Length Salin Panjang - + Copy Area Area fotokopi - + Export CSV Ekspor CSV - + Description Description - + Area Daerah - + Total Total @@ -3039,17 +3044,17 @@ Create BuildingPart - + Invalid cutplane Sumbu potong tidak valid - + All good! No problems found Bagus! Tidak ada masalah ditemukan - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Obyek tidak memiliki atribut IfcProperties. Membatalkan spreadsheet penciptaan untuk obyek: @@ -3204,37 +3209,37 @@ Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3369,42 +3374,42 @@ Berhasil diimpor - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Tambahkan yang dipilih - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3891,12 +3896,12 @@ Floor creation aborted. Arch_Add - + Add component Tambahkan komponen - + Adds the selected components to the active object Menambahkan komponen yang dipilih ke objek yang aktif @@ -3974,12 +3979,12 @@ Floor creation aborted. Arch_Check - + Check Memeriksa - + Checks the selected objects for problems Memeriksa objek yang dipilih untuk masalah @@ -3987,12 +3992,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component Komponen klon - + Clones an object as an undefined architectural component Klon objek sebagai komponen arsitektur undefined @@ -4000,12 +4005,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes Tutup lubang - + Closes holes in open shapes, turning them solids Menutup lubang dalam bentuk terbuka, mengubahnya menjadi padatan @@ -4013,12 +4018,12 @@ Floor creation aborted. Arch_Component - + Component Komponen - + Creates an undefined architectural component Membuat komponen arsitektur yang tidak terdefinisi @@ -4177,12 +4182,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Buat spreadsheet IFC... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -4224,12 +4229,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape Mesh ke Bentuk - + Turns selected meshes into Part Shape objects Ternyata jerat dipilih ke Bagian Shape objek @@ -4396,12 +4401,12 @@ Floor creation aborted. Arch_Remove - + Remove component Hapus komponen - + Remove the selected components from their parents, or create a hole in a component Lepaskan komponen yang dipilih dari orang tua mereka, atau buat lubang di komponen @@ -4409,12 +4414,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Hapus Bentuk dari Arch - + Removes cubic shapes from Arch components Menghapus bentuk kubik dari komponen Arch @@ -4461,12 +4466,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Pilih jaring tak banyak - + Selects all non-manifold meshes from the document or from the selected groups Memilih semua jerat yang tidak bermanuver dari dokumen atau dari kelompok yang dipilih @@ -4505,12 +4510,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh Split Mesh - + Splits selected meshes into independent components Perpecahan jala yang dipilih menjadi komponen independen @@ -4539,12 +4544,12 @@ Floor creation aborted. Arch_Survey - + Survey Survei - + Starts survey Mulai survei @@ -4552,12 +4557,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Beralih bendera IFC Brep - + Force an object to be exported as Brep or not Pakai benda yang akan diekspor sebagai Brep atau tidak @@ -4565,12 +4570,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Menunjukkan atau menyembunyikan subkomponen dari objek ini diff --git a/src/Mod/Arch/Resources/translations/Arch_it.qm b/src/Mod/Arch/Resources/translations/Arch_it.qm index f3d6f3838d..7513fc9f3a 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_it.qm and b/src/Mod/Arch/Resources/translations/Arch_it.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_it.ts b/src/Mod/Arch/Resources/translations/Arch_it.ts index 1ec48a8429..a8799d43d4 100644 --- a/src/Mod/Arch/Resources/translations/Arch_it.ts +++ b/src/Mod/Arch/Resources/translations/Arch_it.ts @@ -574,47 +574,47 @@ Se false, verranno tagliati anche i non solidi, con possibili risultati sbagliati. - + The display length of this section plane La lunghezza di visualizzazione di questo piano di sezione - + The display height of this section plane La larghezza di visualizzazione di questo piano di sezione - + The size of the arrows of this section plane La dimensione delle frecce di questo piano di sezione - + Show the cut in the 3D view Visualizza la sezione nella vista 3D - + The rendering mode to use La modalità di rendering da utilizzare - + If cut geometry is shown or not Se la geometria di taglio è visualizzata o meno - + If cut geometry is filled or not Se la geometria deve essere riempita o non - + The size of the texts inside this object La dimensione dei testi all'interno di questo oggetto - + If checked, source objects are displayed regardless of being visible in the 3D model Se selezionata, gli oggetti di origine vengono visualizzati indipendentemente dall'essere visibili nel modello 3D @@ -769,7 +769,7 @@ Testo da mostrare. Per inserire i rispettivi dati utilizzare $area, $label, $tag, $floor, $walls, $ceiling - + The name of the font Il nome del font @@ -779,7 +779,7 @@ Colore del testo per la zona - + The size of the text font La dimensione del font di testo @@ -1039,12 +1039,12 @@ L'elenco degli spessori degli strati - + The line color of the projected objects Il colore della linea degli oggetti proiettati - + The color of the cut faces (if turned on) Il colore delle facce tagliate (se attivato) @@ -1219,7 +1219,7 @@ La forma di questo oggetto - + The line width of this object Lo spessore della linea di questo oggetto @@ -1349,17 +1349,17 @@ Gli oggetti che devono essere considerati da questo piano di sezione. Vuoto significa tutto il documento. - + The transparency of this object La trasparenza di questo oggetto - + The color of this object Il colore di questo oggetto - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) La distanza tra il piano di taglio e la vista di taglio attuale (tenere questo un valore molto piccolo ma non zero) @@ -1989,7 +1989,7 @@ Specifica se la direzione del tetto deve essere capovolta - + Show the label in the 3D view Mostra l'etichetta nella vista 3D @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length Se non è zero, gli assi non sono rappresentati come una linea intera ma come due linee della lunghezza indicata + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Angolo - + is not closed non è chiuso - + is not valid non è valido - + doesn't contain any solid non contiene nessun solido - + contains a non-closed solid contiene un solido non chiuso - + contains faces that are not part of any solid contiene delle facce che non fanno parte di nessun solido - + Grouping Raggruppa - + Ungrouping Separa - + Split Mesh Dividi Mesh - + Mesh to Shape Da Mesh a Forma @@ -2267,12 +2272,12 @@ file %s creato con successo. - + Add space boundary Aggiungi limite di spazio - + Remove space boundary Rimuovi il limite di spazio @@ -2357,17 +2362,17 @@ Crea sistema strutturale - + Object doesn't have settable IFC Attributes L'oggetto non ha attributi IFC impostabili - + Disabling Brep force flag of object Disabilita la rappresentazione Brep forzata dell'oggetto - + Enabling Brep force flag of object Abilita la rappresentazione Brep forzata dell'oggetto @@ -2487,7 +2492,7 @@ Altezza (mm) - + Create Component Crea componente @@ -2512,22 +2517,22 @@ Categoria - + Key Chiave - + Value Valore - + Unit Unità - + Create IFC properties spreadsheet Crea un foglio di calcolo di proprietà IFC @@ -2727,7 +2732,7 @@ Importa un file CSV - + Export CSV File Esporta file CSV @@ -2949,47 +2954,47 @@ Elementi della finestra - + Survey Ispeziona - + Set description Imposta una descrizione - + Clear Pulisci - + Copy Length Copia la lunghezza - + Copy Area Copia l'area - + Export CSV Esporta CSV - + Description Descrizione - + Area Area - + Total Totale @@ -3039,17 +3044,17 @@ Crea una Parte di edificio - + Invalid cutplane Piano di taglio non valido - + All good! No problems found Tutto bene! Nessun problema riscontrato - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: L'oggetto non possiede attributi IfcProperties. Annullare la creazione del foglio di calcolo per l'oggetto: @@ -3204,37 +3209,37 @@ Crea riferimenti esterni - + Section plane settings Impostazioni del piano di sezione - + Objects seen by this section plane: Oggetti visti in questo piano di sezione: - + Section plane placement: Posizione del piano di sezione: - + Rotate X Rotazione X - + Rotate Y Rotazione Y - + Rotate Z Rotazione Z - + Resize Ridimensiona @@ -3369,42 +3374,42 @@ Importazione riuscita - + Remove highlighted objects from the list above Rimuovi gli oggetti evidenziati dalla lista precedente - + Add selected Aggiungi la selezione - + Add selected object(s) to the scope of this section plane Aggiungi oggetto(i) selezionato(i) allo spazio di questo piano sezione - + Rotates the plane along the X axis Ruota il piano lungo l'asse X - + Rotates the plane along the Y axis Ruota il piano lungo l'asse Y - + Rotates the plane along the Z axis Ruota il piano lungo l'asse Z - + Resizes the plane to fit the objects in the list above Ridimensiona il piano per adattare gli oggetti nella lista precedente - + Centers the plane on the objects in the list above Centra il piano sugli oggetti nella lista precedente @@ -3891,12 +3896,12 @@ Creazione del Livello interrotta. Arch_Add - + Add component Aggiungi componente - + Adds the selected components to the active object Aggiunge i componenti selezionati all'oggetto attivo @@ -3974,12 +3979,12 @@ Creazione del Livello interrotta. Arch_Check - + Check Controlla - + Checks the selected objects for problems Controlla se gli oggetti selezionati hanno dei problemi @@ -3987,12 +3992,12 @@ Creazione del Livello interrotta. Arch_CloneComponent - + Clone component Clona componente - + Clones an object as an undefined architectural component Duplica un oggetto come un componente architettonico indefinito @@ -4000,12 +4005,12 @@ Creazione del Livello interrotta. Arch_CloseHoles - + Close holes Chiudi fori - + Closes holes in open shapes, turning them solids Chiude i fori nelle forme aperte, trasformandole in solidi @@ -4013,12 +4018,12 @@ Creazione del Livello interrotta. Arch_Component - + Component Componente - + Creates an undefined architectural component Crea un componente architettonico non definito @@ -4177,12 +4182,12 @@ Creazione del Livello interrotta. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Crea un foglio di calcolo IFC... - + Creates a spreadsheet to store IFC properties of an object. Crea un foglio di calcolo per archiviare le proprietà ifc di un oggetto. @@ -4224,12 +4229,12 @@ Creazione del Livello interrotta. Arch_MeshToShape - + Mesh to Shape Da Mesh a Forma - + Turns selected meshes into Part Shape objects Trasforma le mesh selezionate in oggetti Part Shape @@ -4396,12 +4401,12 @@ Creazione del Livello interrotta. Arch_Remove - + Remove component Rimuovi componente - + Remove the selected components from their parents, or create a hole in a component Rimuove i componenti selezionati dai loro genitori, o crea un buco in un componente @@ -4409,12 +4414,12 @@ Creazione del Livello interrotta. Arch_RemoveShape - + Remove Shape from Arch Rimuovi Forma da Arch - + Removes cubic shapes from Arch components Rimuove le forme cubiche dai componenti Arch @@ -4461,12 +4466,12 @@ Creazione del Livello interrotta. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Seleziona le mesh non-manifold - + Selects all non-manifold meshes from the document or from the selected groups Seleziona tutte le mesh non-manifold nel documento o nei gruppi selezionati @@ -4505,12 +4510,12 @@ Creazione del Livello interrotta. Arch_SplitMesh - + Split Mesh Dividi Mesh - + Splits selected meshes into independent components Divide le Mesh selezionate in componenti indipendenti @@ -4539,12 +4544,12 @@ Creazione del Livello interrotta. Arch_Survey - + Survey Ispeziona - + Starts survey Avvia ispezione @@ -4552,12 +4557,12 @@ Creazione del Livello interrotta. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Attiva/Disattiva IFC Brep - + Force an object to be exported as Brep or not Forza, o non, l'esportazione di un oggetto come Brep @@ -4565,12 +4570,12 @@ Creazione del Livello interrotta. Arch_ToggleSubs - + Toggle subcomponents Attiva o disattiva i sottocomponenti - + Shows or hides the subcomponents of this object Mostra o nasconde i sottocomponenti di questo oggetto diff --git a/src/Mod/Arch/Resources/translations/Arch_ja.qm b/src/Mod/Arch/Resources/translations/Arch_ja.qm index 9be0d6afaa..25052c46e9 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ja.qm and b/src/Mod/Arch/Resources/translations/Arch_ja.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ja.ts b/src/Mod/Arch/Resources/translations/Arch_ja.ts index c20a531489..6b6b07b1f0 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ja.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ja.ts @@ -574,47 +574,47 @@ False の場合、非ソリッドも切断され、不正な結果となる可能性があります。 - + The display length of this section plane この断面平面の表示長さ - + The display height of this section plane この断面平面の表示高さ - + The size of the arrows of this section plane この断面平面の矢印のサイズ - + Show the cut in the 3D view 3Dビューでカットを表示 - + The rendering mode to use 使用するレンダリングモード - + If cut geometry is shown or not カット・ジオメトリーを表示するかどうか - + If cut geometry is filled or not カット・ジオメトリーを塗りつぶすかどうか - + The size of the texts inside this object このオブジェクト内部のテキストの幅 - + If checked, source objects are displayed regardless of being visible in the 3D model チェックされている場合、ソースオブジェクトが3Dモデル内で表示されているかどうかに関わらず表示されます。 @@ -769,7 +769,7 @@ 表示されるテキスト。$area、$label、$tag、$floor、$walls、$ceilingを使用して各データを挿入してください。 - + The name of the font フォントの名前 @@ -779,7 +779,7 @@ エリアの文字色 - + The size of the text font テキストフォントのサイズ @@ -1039,12 +1039,12 @@ レイヤー厚みのリスト - + The line color of the projected objects 投影オブジェクトの線の色 - + The color of the cut faces (if turned on) カット面の色（有効な場合） @@ -1219,7 +1219,7 @@ このオブジェクトの形 - + The line width of this object オブジェクトの線幅 @@ -1349,17 +1349,17 @@ この切断面の対象となるオブジェクト。空はドキュメント全体が対象。 - + The transparency of this object オブジェクトの透過度 - + The color of this object このオブジェクトの色 - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) 切断面と実際のビュー切断面の間の距離（ゼロでない非常に小さな値を設定してください） @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Show the label in the 3D view @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ 角度 - + is not closed が閉じていません - + is not valid は無効です - + doesn't contain any solid ソリッドが含まれていません - + contains a non-closed solid 閉じていないソリッドが含まれています - + contains faces that are not part of any solid どのソリッドにも属していない面が含まれています - + Grouping グループ化 - + Ungrouping グループ化の解除 - + Split Mesh メッシュを分割 - + Mesh to Shape メッシュからシェイプへ @@ -2267,12 +2272,12 @@ ファイル %s が正常に作成されました。 - + Add space boundary スペース境界を追加 - + Remove space boundary スペース境界を削除 @@ -2357,17 +2362,17 @@ 構造システムを作成 - + Object doesn't have settable IFC Attributes オブジェクトに設定可能な IFC 属性がありません - + Disabling Brep force flag of object オブジェクトの Brep 強制フラグを無効化 - + Enabling Brep force flag of object オブジェクトの Brep 強制フラグを有効化 @@ -2487,7 +2492,7 @@ 高さ (mm) - + Create Component コンポーネントを作成 @@ -2512,22 +2517,22 @@ カテゴリ - + Key キー名 - + Value 値 - + Unit 単位 - + Create IFC properties spreadsheet IFCプロパティー・スプレッドシートを作成 @@ -2727,7 +2732,7 @@ CSVファイルをインポート - + Export CSV File CSVファイルをエクスポート @@ -2949,47 +2954,47 @@ 窓要素 - + Survey 調査 - + Set description 説明を設定 - + Clear クリア - + Copy Length 長さをコピー - + Copy Area 面積をコピー - + Export CSV CSVをエクスポート - + Description 説明 - + Area 面積 - + Total 合計 @@ -3039,17 +3044,17 @@ ビルディング・パートを作成 - + Invalid cutplane 切断面が無効です - + All good! No problems found すべて良好！問題は見つかりませんでした - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: オブジェクトにIfcProperties属性がありません。このオブジェクトのためのスプレッドシート作成をキャンセルしてください： @@ -3204,37 +3209,37 @@ 外部参照を作成 - + Section plane settings 断面平面の設定 - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X X軸で回転 - + Rotate Y Y軸で回転 - + Rotate Z Z軸で回転 - + Resize リサイズ @@ -3369,42 +3374,42 @@ インポート成功 - + Remove highlighted objects from the list above リスト上からハイライトしたオブジェクトを削除します - + Add selected 選択追加 - + Add selected object(s) to the scope of this section plane 選択したオブジェクト(複数可) をこの断面平面のスコープに追加 - + Rotates the plane along the X axis X軸に沿って平面を回転 - + Rotates the plane along the Y axis Y軸に沿って平面を回転 - + Rotates the plane along the Z axis Z軸に沿って平面を回転 - + Resizes the plane to fit the objects in the list above リスト上のオブジェクトがフィットするように平面のサイズを変更します - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3891,12 +3896,12 @@ Floor creation aborted. Arch_Add - + Add component コンポーネントを追加 - + Adds the selected components to the active object 選択したコンポーネントをアクティブなオブジェクトに追加します @@ -3974,12 +3979,12 @@ Floor creation aborted. Arch_Check - + Check チェック - + Checks the selected objects for problems 選択されているオブジェクトの問題を確認します @@ -3987,12 +3992,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component コンポーネントのクローン - + Clones an object as an undefined architectural component オブジェクトを未定義建築コンポーネントとしてクローン @@ -4000,12 +4005,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes 穴をふさぐ - + Closes holes in open shapes, turning them solids 開いたシェイプの穴をふさいでソリッドにします @@ -4013,12 +4018,12 @@ Floor creation aborted. Arch_Component - + Component コンポーネント - + Creates an undefined architectural component 未定義建築コンポーネントを作成 @@ -4177,12 +4182,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... IFCスプレッドシートを作成... - + Creates a spreadsheet to store IFC properties of an object. オブジェクトのIFCプロパティーを保存するためのスプレッドシートを作成 @@ -4224,12 +4229,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape メッシュからシェイプへ - + Turns selected meshes into Part Shape objects 選択されているメッシュをパートシェイプオブジェクトへ変換します @@ -4396,12 +4401,12 @@ Floor creation aborted. Arch_Remove - + Remove component コンポーネントの削除 - + Remove the selected components from their parents, or create a hole in a component 選択されているオブジェクトを親オブジェクトから取り除くか、またはコンポーネントに穴を作成します @@ -4409,12 +4414,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Archからシェイプを削除します。 - + Removes cubic shapes from Arch components Archコンポーネントから立方体シェイプを取り除きます @@ -4461,12 +4466,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes ノンマニフォールドメッシュを選択 - + Selects all non-manifold meshes from the document or from the selected groups ドキュメントまたは選択されているグループから全てのノンマニフォールドメッシュを選択 @@ -4505,12 +4510,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh メッシュを分割 - + Splits selected meshes into independent components 選択されたメッシュを分割して独立したコンポーネントにします @@ -4539,12 +4544,12 @@ Floor creation aborted. Arch_Survey - + Survey 調査 - + Starts survey 調査開始 @@ -4552,12 +4557,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag IFC Brep フラグの切り替え - + Force an object to be exported as Brep or not オブジェクトを強制的に Brep としてエクスポートするかどうか @@ -4565,12 +4570,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents サブコンポーネントを切り替え - + Shows or hides the subcomponents of this object このオブジェクトのサブコンポーネントを表示/非表示 diff --git a/src/Mod/Arch/Resources/translations/Arch_kab.qm b/src/Mod/Arch/Resources/translations/Arch_kab.qm index 307f75ab8e..90e0e7d48d 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_kab.qm and b/src/Mod/Arch/Resources/translations/Arch_kab.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_kab.ts b/src/Mod/Arch/Resources/translations/Arch_kab.ts index 99283a27d9..949f9de47a 100644 --- a/src/Mod/Arch/Resources/translations/Arch_kab.ts +++ b/src/Mod/Arch/Resources/translations/Arch_kab.ts @@ -574,47 +574,47 @@ If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Show the cut in the 3D view - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model @@ -769,7 +769,7 @@ The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - + The name of the font The name of the font @@ -779,7 +779,7 @@ The color of the area text - + The size of the text font The size of the text font @@ -1039,12 +1039,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1219,7 +1219,7 @@ The shape of this object - + The line width of this object The line width of this object @@ -1349,17 +1349,17 @@ The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Show the label in the 3D view @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Tiɣmeṛt - + is not closed ur imdil ara - + is not valid mačči d ameɣtu - + doesn't contain any solid doesn't contain any solid - + contains a non-closed solid contains a non-closed solid - + contains faces that are not part of any solid contains faces that are not part of any solid - + Grouping Grouping - + Ungrouping Ungrouping - + Split Mesh Split Mesh - + Mesh to Shape Mesh to Shape @@ -2267,12 +2272,12 @@ file %s successfully created. - + Add space boundary Add space boundary - + Remove space boundary Remove space boundary @@ -2357,17 +2362,17 @@ Create Structural System - + Object doesn't have settable IFC Attributes Object doesn't have settable IFC Attributes - + Disabling Brep force flag of object Disabling Brep force flag of object - + Enabling Brep force flag of object Enabling Brep force flag of object @@ -2487,7 +2492,7 @@ Height (mm) - + Create Component Create Component @@ -2512,22 +2517,22 @@ Taggayt - + Key Tasarut - + Value Azal - + Unit Anaw - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2727,7 +2732,7 @@ Import CSV File - + Export CSV File Export CSV File @@ -2949,47 +2954,47 @@ Window elements - + Survey Aḥedqis - + Set description Set description - + Clear Sfeḍ - + Copy Length Copy Length - + Copy Area Copy Area - + Export CSV Export CSV - + Description Aglam - + Area Area - + Total Total @@ -3039,17 +3044,17 @@ Create BuildingPart - + Invalid cutplane Invalid cutplane - + All good! No problems found All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -3204,37 +3209,37 @@ Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3369,42 +3374,42 @@ Successfully imported - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3891,12 +3896,12 @@ Floor creation aborted. Arch_Add - + Add component Rnu asuddis - + Adds the selected components to the active object Adds the selected components to the active object @@ -3974,12 +3979,12 @@ Floor creation aborted. Arch_Check - + Check Senqed - + Checks the selected objects for problems Checks the selected objects for problems @@ -3987,12 +3992,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Clones an object as an undefined architectural component @@ -4000,12 +4005,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes Close holes - + Closes holes in open shapes, turning them solids Closes holes in open shapes, turning them solids @@ -4013,12 +4018,12 @@ Floor creation aborted. Arch_Component - + Component Asuddis - + Creates an undefined architectural component Creates an undefined architectural component @@ -4177,12 +4182,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Create IFC spreadsheet... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -4224,12 +4229,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape Mesh to Shape - + Turns selected meshes into Part Shape objects Turns selected meshes into Part Shape objects @@ -4396,12 +4401,12 @@ Floor creation aborted. Arch_Remove - + Remove component Kkes asuddis - + Remove the selected components from their parents, or create a hole in a component Remove the selected components from their parents, or create a hole in a component @@ -4409,12 +4414,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Remove Shape from Arch - + Removes cubic shapes from Arch components Removes cubic shapes from Arch components @@ -4461,12 +4466,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Select non-manifold meshes - + Selects all non-manifold meshes from the document or from the selected groups Selects all non-manifold meshes from the document or from the selected groups @@ -4505,12 +4510,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh Split Mesh - + Splits selected meshes into independent components Splits selected meshes into independent components @@ -4539,12 +4544,12 @@ Floor creation aborted. Arch_Survey - + Survey Survey - + Starts survey Bdu aḥedqis @@ -4552,12 +4557,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Toggle IFC Brep flag - + Force an object to be exported as Brep or not Force an object to be exported as Brep or not @@ -4565,12 +4570,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object diff --git a/src/Mod/Arch/Resources/translations/Arch_ko.qm b/src/Mod/Arch/Resources/translations/Arch_ko.qm index ca0fbc05dd..4d3231a073 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ko.qm and b/src/Mod/Arch/Resources/translations/Arch_ko.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ko.ts b/src/Mod/Arch/Resources/translations/Arch_ko.ts index 977e1a2a42..90d849e1f3 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ko.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ko.ts @@ -574,47 +574,47 @@ If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Show the cut in the 3D view - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model @@ -769,7 +769,7 @@ The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - + The name of the font 글꼴 이름 @@ -779,7 +779,7 @@ The color of the area text - + The size of the text font The size of the text font @@ -1039,12 +1039,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1219,7 +1219,7 @@ The shape of this object - + The line width of this object The line width of this object @@ -1349,17 +1349,17 @@ The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Show the label in the 3D view @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ 각 - + is not closed 가 닫히지 않습니다. - + is not valid 유효하지 않습니다 - + doesn't contain any solid 모든 솔리드를 포함 하지 않는다 - + contains a non-closed solid -닫힌 솔리드를 포함 - + contains faces that are not part of any solid 모든 솔리드에 속하지 않는 면을 포함 - + Grouping 그룹화 - + Ungrouping 그룹 해제 - + Split Mesh Split Mesh - + Mesh to Shape Mesh to Shape @@ -2267,12 +2272,12 @@ %s 파일 생성 성공. - + Add space boundary 공간 경계 추가 - + Remove space boundary 공간 경계 제거 @@ -2357,17 +2362,17 @@ Create Structural System - + Object doesn't have settable IFC Attributes Object doesn't have settable IFC Attributes - + Disabling Brep force flag of object Disabling Brep force flag of object - + Enabling Brep force flag of object Enabling Brep force flag of object @@ -2487,7 +2492,7 @@ 높이(mm) - + Create Component 구성 요소 만들기 @@ -2512,22 +2517,22 @@ 카테고리 - + Key 키 - + Value 값 - + Unit 단위 - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2727,7 +2732,7 @@ CSV 파일 가져오기 - + Export CSV File CSV 파일로 내보내기 @@ -2949,47 +2954,47 @@ Window elements - + Survey Survey - + Set description Set description - + Clear 지우기 - + Copy Length Copy Length - + Copy Area Copy Area - + Export CSV CSV로 내보내기 - + Description 설명 - + Area 면적 - + Total 합계 @@ -3039,17 +3044,17 @@ Create BuildingPart - + Invalid cutplane Invalid cutplane - + All good! No problems found 완벽합니다! - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -3204,37 +3209,37 @@ Create external reference - + Section plane settings 단면 설정 - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3369,42 +3374,42 @@ 가져오기 성공 - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3891,12 +3896,12 @@ Floor creation aborted. Arch_Add - + Add component Add component - + Adds the selected components to the active object Adds the selected components to the active object @@ -3974,12 +3979,12 @@ Floor creation aborted. Arch_Check - + Check Check - + Checks the selected objects for problems Checks the selected objects for problems @@ -3987,12 +3992,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Clones an object as an undefined architectural component @@ -4000,12 +4005,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes Close holes - + Closes holes in open shapes, turning them solids Closes holes in open shapes, turning them solids @@ -4013,12 +4018,12 @@ Floor creation aborted. Arch_Component - + Component Component - + Creates an undefined architectural component Creates an undefined architectural component @@ -4177,12 +4182,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Create IFC spreadsheet... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -4224,12 +4229,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape Mesh to Shape - + Turns selected meshes into Part Shape objects Turns selected meshes into Part Shape objects @@ -4396,12 +4401,12 @@ Floor creation aborted. Arch_Remove - + Remove component Remove component - + Remove the selected components from their parents, or create a hole in a component Remove the selected components from their parents, or create a hole in a component @@ -4409,12 +4414,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Remove Shape from Arch - + Removes cubic shapes from Arch components Removes cubic shapes from Arch components @@ -4461,12 +4466,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Select non-manifold meshes - + Selects all non-manifold meshes from the document or from the selected groups Selects all non-manifold meshes from the document or from the selected groups @@ -4505,12 +4510,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh Split Mesh - + Splits selected meshes into independent components Splits selected meshes into independent components @@ -4539,12 +4544,12 @@ Floor creation aborted. Arch_Survey - + Survey Survey - + Starts survey Starts survey @@ -4552,12 +4557,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Toggle IFC Brep flag - + Force an object to be exported as Brep or not Force an object to be exported as Brep or not @@ -4565,12 +4570,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object diff --git a/src/Mod/Arch/Resources/translations/Arch_lt.qm b/src/Mod/Arch/Resources/translations/Arch_lt.qm index 89290803eb..8ee70cccfa 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_lt.qm and b/src/Mod/Arch/Resources/translations/Arch_lt.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_lt.ts b/src/Mod/Arch/Resources/translations/Arch_lt.ts index bc18deeff8..0789267994 100644 --- a/src/Mod/Arch/Resources/translations/Arch_lt.ts +++ b/src/Mod/Arch/Resources/translations/Arch_lt.ts @@ -574,47 +574,47 @@ Jei nurodyta „Netiesa“, nepilnaviduriai kūnai bus taip pat pjaustomi, galimai klaidingai. - + The display length of this section plane Pjūvio plokštumos ilgio rodmuo - + The display height of this section plane Pjūvio plokštumos aukščio rodmuo - + The size of the arrows of this section plane Pjūvio plokštumos rodyklių dydis - + Show the cut in the 3D view Rodyti pjūvį 3D vaizde - + The rendering mode to use Naudoti atvaizdavimo būdą - + If cut geometry is shown or not Jeigu iškirpta geometrija yra vaizduojama arba ne - + If cut geometry is filled or not Jeigu iškirpta geometrija yra užpildyta arba ne - + The size of the texts inside this object Rašmenų dydis šio objekto viduje - + If checked, source objects are displayed regardless of being visible in the 3D model Jeigu patikrinta, šaltinio objektai yra vaizduojami neatsižvelgiant į tai kaip jie rodomi 3D modelyje @@ -769,7 +769,7 @@ Rodyti tekstą. Įterpti atitinkamus duomenis naudokite $area, $label, $tag, $floor, $walls, $ceiling - + The name of the font Šrifto pavadinimas @@ -779,7 +779,7 @@ Teksto pagrindo spalva - + The size of the text font Teksto šrifto dydis @@ -1039,12 +1039,12 @@ Sluoksnio storių sąrašas - + The line color of the projected objects Projekciniuose vaizduose rodomo objekto linijų spalva - + The color of the cut faces (if turned on) Pjūvyje rodomų paviršių spalva (jeigu įjungta) @@ -1219,7 +1219,7 @@ Objekto forma - + The line width of this object Objekto linijos plotis @@ -1349,17 +1349,17 @@ The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Show the label in the 3D view @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Kampas - + is not closed neuždarytas - + is not valid negalioja - + doesn't contain any solid nėra jokių pilnavidurių tūrių - + contains a non-closed solid turi neuždarą pilnavidurį tūrį - + contains faces that are not part of any solid turi plokštumas kurios nepriklauso pilnaviduriams tūriams - + Grouping Grupavimas - + Ungrouping Išgrupavimas - + Split Mesh Skelti tinklą - + Mesh to Shape Mesh to Shape @@ -2267,12 +2272,12 @@ file %s successfully created. - + Add space boundary Add space boundary - + Remove space boundary Remove space boundary @@ -2357,17 +2362,17 @@ Create Structural System - + Object doesn't have settable IFC Attributes Object doesn't have settable IFC Attributes - + Disabling Brep force flag of object Disabling Brep force flag of object - + Enabling Brep force flag of object Enabling Brep force flag of object @@ -2487,7 +2492,7 @@ Height (mm) - + Create Component Create Component @@ -2512,22 +2517,22 @@ Kategorija - + Key Raktažodis - + Value Reikšmė - + Unit Vienetas - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2727,7 +2732,7 @@ Importuoti CSV formatą - + Export CSV File Eksportuoti CSV formatu @@ -2949,47 +2954,47 @@ Window elements - + Survey Survey - + Set description Set description - + Clear Išvalyti - + Copy Length Copy Length - + Copy Area Copy Area - + Export CSV Export CSV - + Description Aprašymas - + Area Plotas - + Total Viso @@ -3039,17 +3044,17 @@ Create BuildingPart - + Invalid cutplane Invalid cutplane - + All good! No problems found All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -3204,37 +3209,37 @@ Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3369,42 +3374,42 @@ Successfully imported - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3891,12 +3896,12 @@ Floor creation aborted. Arch_Add - + Add component Add component - + Adds the selected components to the active object Prijungia pasirinktas dalis prie taisomo daikto @@ -3974,12 +3979,12 @@ Floor creation aborted. Arch_Check - + Check Check - + Checks the selected objects for problems Checks the selected objects for problems @@ -3987,12 +3992,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Klonuoja daiktą ir padarydamas jį neapibrėžta architektūrine detale @@ -4000,12 +4005,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes Close holes - + Closes holes in open shapes, turning them solids Closes holes in open shapes, turning them solids @@ -4013,12 +4018,12 @@ Floor creation aborted. Arch_Component - + Component Component - + Creates an undefined architectural component Sukuria neapibrėžtą architektūrinę detalę @@ -4177,12 +4182,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Create IFC spreadsheet... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -4224,12 +4229,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape Mesh to Shape - + Turns selected meshes into Part Shape objects Turns selected meshes into Part Shape objects @@ -4396,12 +4401,12 @@ Floor creation aborted. Arch_Remove - + Remove component Remove component - + Remove the selected components from their parents, or create a hole in a component Remove the selected components from their parents, or create a hole in a component @@ -4409,12 +4414,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Remove Shape from Arch - + Removes cubic shapes from Arch components Removes cubic shapes from Arch components @@ -4461,12 +4466,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Select non-manifold meshes - + Selects all non-manifold meshes from the document or from the selected groups Selects all non-manifold meshes from the document or from the selected groups @@ -4505,12 +4510,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh Skelti tinklą - + Splits selected meshes into independent components Skelia pasirinktus tinklus į nepriklausomas sudedamąsias dalis @@ -4539,12 +4544,12 @@ Floor creation aborted. Arch_Survey - + Survey Survey - + Starts survey Starts survey @@ -4552,12 +4557,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Toggle IFC Brep flag - + Force an object to be exported as Brep or not Force an object to be exported as Brep or not @@ -4565,12 +4570,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object diff --git a/src/Mod/Arch/Resources/translations/Arch_nl.qm b/src/Mod/Arch/Resources/translations/Arch_nl.qm index 5245a00f51..bd319fa560 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_nl.qm and b/src/Mod/Arch/Resources/translations/Arch_nl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_nl.ts b/src/Mod/Arch/Resources/translations/Arch_nl.ts index fad36bc642..c2c6fe9e60 100644 --- a/src/Mod/Arch/Resources/translations/Arch_nl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_nl.ts @@ -574,47 +574,47 @@ Wanneer onwaar, dan zullen de non-volumemodellen ook geknipt worden met mogelijke onjuiste resultaten. - + The display length of this section plane De weergavelengte van dit sectievlak - + The display height of this section plane De weergavehoogte van dit sectievlak - + The size of the arrows of this section plane De grootte van de pijlen van dit sectievlak - + Show the cut in the 3D view Toon de snede in 3D-weergave - + The rendering mode to use De rendermethode te gebruiken - + If cut geometry is shown or not Na het knippen zal de geometrie wel of niet worden weergegeven - + If cut geometry is filled or not Na het knippen zal de geometrie wel of niet worden weergegeven - + The size of the texts inside this object De grootte van de teksten binnen dit object - + If checked, source objects are displayed regardless of being visible in the 3D model Indien aangevinkt, worden bronobjecten weergegeven ongeacht de zichtbaarheid in het 3D-model @@ -769,7 +769,7 @@ De tekst weergeven. Gebruik $area, $label, $tag, $floor, $walls, $ceiling om de betrokken gegevens in te voegen - + The name of the font De naam van het lettertype @@ -779,7 +779,7 @@ De kleur van het gebied tekst - + The size of the text font De grootte van het lettertype @@ -1039,12 +1039,12 @@ De lijst met diktes van lagen - + The line color of the projected objects De lijnkleur van de geprojecteerde objecten - + The color of the cut faces (if turned on) De kleur van de oppervlaktes van de doorsnede (indien ingeschakeld) @@ -1219,7 +1219,7 @@ De vorm van dit object - + The line width of this object De lijnbreedte van dit object @@ -1349,17 +1349,17 @@ De objecten die door dit sectievlak moeten worden overwogen. Leeg betekent het hele document. - + The transparency of this object De mate van doorzichtigheid van dit object - + The color of this object De kleur van dit object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) De afstand tussen te knippen vlak en de werkelijke weergegeven knip (Houd dit een zeer lage waarde maar niet nul) @@ -1989,7 +1989,7 @@ Geeft de richting aan van het dak moet worden omgedraaid - + Show the label in the 3D view Toon het label in de 3D-weergave @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Hoek - + is not closed is niet gesloten - + is not valid is niet geldig - + doesn't contain any solid bevat geen volumemodel - + contains a non-closed solid bevat een niet-gesloten volumemodel - + contains faces that are not part of any solid bevat vlakken die niet deel uitmaken van een volumemodel - + Grouping Groeperen - + Ungrouping Degroeperen - + Split Mesh Net splitten - + Mesh to Shape Net naar Vorm @@ -2267,12 +2272,12 @@ bestand %s met succes aangemaakt. - + Add space boundary Ruimtegrens toevoegen - + Remove space boundary Ruimtegrens verwijderen @@ -2357,17 +2362,17 @@ Creëer Structureel Systeem - + Object doesn't have settable IFC Attributes Object heeft geen instelbare IFC Attributen - + Disabling Brep force flag of object Zet de Brep forceer stand van het object uit - + Enabling Brep force flag of object Zet de Brep forceer stand van het object aan @@ -2487,7 +2492,7 @@ Hoogte (mm) - + Create Component Creëer Component @@ -2512,22 +2517,22 @@ Categorie - + Key Sleutel - + Value Waarde - + Unit Eenheid - + Create IFC properties spreadsheet IFC eigenschappen werkblad maken @@ -2727,7 +2732,7 @@ Importeer CSV bestand - + Export CSV File Exporteren als CSV bestand @@ -2948,47 +2953,47 @@ Venster elementen - + Survey Enquête - + Set description Vul omschrijving in - + Clear Wissen - + Copy Length Lengte kopiëren - + Copy Area Kopieer gebied - + Export CSV Exporteer CSV - + Description Omschrijving - + Area Oppervlakte - + Total Totaal @@ -3038,17 +3043,17 @@ Maak een gebouwonderdeel - + Invalid cutplane Ongeldig snijvlak - + All good! No problems found Alle goed! Geen problemen gevonden - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Het object heeft geen IndustriesFoundationClassesProperties. Spreadsheet annuleren voor: @@ -3203,37 +3208,37 @@ Maak externe verwijzing - + Section plane settings Doorsnede instellingen - + Objects seen by this section plane: Objecten zichtbaar in deze doorsnede: - + Section plane placement: Plaats doorsnede: - + Rotate X Rotatie X - + Rotate Y Rotatie Y - + Rotate Z Rotatie Z - + Resize Grootte aanpassen @@ -3368,42 +3373,42 @@ Succesvol geïmporteerd - + Remove highlighted objects from the list above Verwijder de gemarkeerde objecten uit de bovenstaande lijst - + Add selected Voeg geselecteerde toe - + Add selected object(s) to the scope of this section plane Voeg het(de) geselecteerde object(en) toe aan het bereik van dit sectievlak - + Rotates the plane along the X axis Draait het vlak langs de X-as - + Rotates the plane along the Y axis Draait het vlak langs de Y-as - + Rotates the plane along the Z axis Draait het vlak langs de Z-as - + Resizes the plane to fit the objects in the list above Past de grootte van het vlak aan om te passen aan de objecten in de bovenstaande lijst - + Centers the plane on the objects in the list above Centreert het vlak op de objecten in de bovenstaande lijst @@ -3890,12 +3895,12 @@ Vloer object wordt niet gemaakt. Arch_Add - + Add component Voeg component toe - + Adds the selected components to the active object De geselecteerde onderdelen toevoegen aan het actieve object @@ -3973,12 +3978,12 @@ Vloer object wordt niet gemaakt. Arch_Check - + Check Controleer - + Checks the selected objects for problems Controleer de geselecteerde objecten op problemen @@ -3986,12 +3991,12 @@ Vloer object wordt niet gemaakt. Arch_CloneComponent - + Clone component Kloon onderdeel - + Clones an object as an undefined architectural component Kloont een object als een niet-gedefinieerde architectonisch onderdeel @@ -3999,12 +4004,12 @@ Vloer object wordt niet gemaakt. Arch_CloseHoles - + Close holes Sluit gaten - + Closes holes in open shapes, turning them solids Kloont gaten in open vormen, maakt er volumemodellen van @@ -4012,12 +4017,12 @@ Vloer object wordt niet gemaakt. Arch_Component - + Component Onderdeel - + Creates an undefined architectural component Maakt een ongedefineert architectonisch onderdeel @@ -4176,12 +4181,12 @@ Vloer object wordt niet gemaakt. Arch_IfcSpreadsheet - + Create IFC spreadsheet... IFC rekenblad aanmaken... - + Creates a spreadsheet to store IFC properties of an object. Maakt een rekenblad voor het bewaren van IFC eigenschappen van een object. @@ -4223,12 +4228,12 @@ Vloer object wordt niet gemaakt. Arch_MeshToShape - + Mesh to Shape Net naar Vorm - + Turns selected meshes into Part Shape objects De geselecteerde meshes worden verandert in Onderdeel Vorm objecten @@ -4395,12 +4400,12 @@ Vloer object wordt niet gemaakt. Arch_Remove - + Remove component Verwijderen component - + Remove the selected components from their parents, or create a hole in a component Verwijder de geselecteerde onderdelen van hun ouders, of maak een gat in een component @@ -4408,12 +4413,12 @@ Vloer object wordt niet gemaakt. Arch_RemoveShape - + Remove Shape from Arch Vorm verwijderen - + Removes cubic shapes from Arch components Verwijdert kubieke vormen uit Arch-componenten @@ -4460,12 +4465,12 @@ Vloer object wordt niet gemaakt. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Niet-manifold netten selecteren - + Selects all non-manifold meshes from the document or from the selected groups Selecteert alle niet-manifold netten van het document of van de geselecteerde groepen @@ -4504,12 +4509,12 @@ Vloer object wordt niet gemaakt. Arch_SplitMesh - + Split Mesh Net splitten - + Splits selected meshes into independent components Splits geselecteerde netten in onafhankelijke componenten @@ -4538,12 +4543,12 @@ Vloer object wordt niet gemaakt. Arch_Survey - + Survey Enquête - + Starts survey Start enquête @@ -4551,12 +4556,12 @@ Vloer object wordt niet gemaakt. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag IFC Brep vlag in-/ uitschakelen - + Force an object to be exported as Brep or not Dwing een object geëxporteerd te worden als Brep of niet @@ -4564,12 +4569,12 @@ Vloer object wordt niet gemaakt. Arch_ToggleSubs - + Toggle subcomponents Wissel tussen sub-onderdelen - + Shows or hides the subcomponents of this object Toont of verbergt de subonderdelen voor dit object diff --git a/src/Mod/Arch/Resources/translations/Arch_no.qm b/src/Mod/Arch/Resources/translations/Arch_no.qm index c5096ef777..02ca748957 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_no.qm and b/src/Mod/Arch/Resources/translations/Arch_no.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_no.ts b/src/Mod/Arch/Resources/translations/Arch_no.ts index 1608c27a1e..76222a92a6 100644 --- a/src/Mod/Arch/Resources/translations/Arch_no.ts +++ b/src/Mod/Arch/Resources/translations/Arch_no.ts @@ -574,47 +574,47 @@ If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Show the cut in the 3D view - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model @@ -769,7 +769,7 @@ The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - + The name of the font The name of the font @@ -779,7 +779,7 @@ The color of the area text - + The size of the text font The size of the text font @@ -1039,12 +1039,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1219,7 +1219,7 @@ The shape of this object - + The line width of this object The line width of this object @@ -1349,17 +1349,17 @@ The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Show the label in the 3D view @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Vinkel - + is not closed er ikke lukket - + is not valid er ikke gyldig - + doesn't contain any solid inneholder ingen solid - + contains a non-closed solid inneholder en ulukket solid - + contains faces that are not part of any solid inneholder flater som ikke er en del av noen solid - + Grouping Gruppering - + Ungrouping Deler opp gruppe - + Split Mesh Del opp nett - + Mesh to Shape Nett til figur @@ -2267,12 +2272,12 @@ filen %s er opprettet. - + Add space boundary Add space boundary - + Remove space boundary Remove space boundary @@ -2357,17 +2362,17 @@ Create Structural System - + Object doesn't have settable IFC Attributes Object doesn't have settable IFC Attributes - + Disabling Brep force flag of object Disabling Brep force flag of object - + Enabling Brep force flag of object Enabling Brep force flag of object @@ -2487,7 +2492,7 @@ Height (mm) - + Create Component Create Component @@ -2512,22 +2517,22 @@ Kategori - + Key Key - + Value Verdi - + Unit Enhet - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2727,7 +2732,7 @@ Import CSV File - + Export CSV File Export CSV File @@ -2949,47 +2954,47 @@ Window elements - + Survey Survey - + Set description Set description - + Clear Tøm - + Copy Length Copy Length - + Copy Area Copy Area - + Export CSV Export CSV - + Description Beskrivelse - + Area Area - + Total Total @@ -3039,17 +3044,17 @@ Create BuildingPart - + Invalid cutplane Invalid cutplane - + All good! No problems found All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -3204,37 +3209,37 @@ Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3369,42 +3374,42 @@ Successfully imported - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3891,12 +3896,12 @@ Floor creation aborted. Arch_Add - + Add component Legg til komponent - + Adds the selected components to the active object Legger til de valgte komponentene i det aktive objektet @@ -3974,12 +3979,12 @@ Floor creation aborted. Arch_Check - + Check Check - + Checks the selected objects for problems Checks the selected objects for problems @@ -3987,12 +3992,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Clones an object as an undefined architectural component @@ -4000,12 +4005,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes Close holes - + Closes holes in open shapes, turning them solids Closes holes in open shapes, turning them solids @@ -4013,12 +4018,12 @@ Floor creation aborted. Arch_Component - + Component Component - + Creates an undefined architectural component Creates an undefined architectural component @@ -4177,12 +4182,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Create IFC spreadsheet... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -4224,12 +4229,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape Mesh to Shape - + Turns selected meshes into Part Shape objects Turns selected meshes into Part Shape objects @@ -4396,12 +4401,12 @@ Floor creation aborted. Arch_Remove - + Remove component Remove component - + Remove the selected components from their parents, or create a hole in a component Remove the selected components from their parents, or create a hole in a component @@ -4409,12 +4414,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Remove Shape from Arch - + Removes cubic shapes from Arch components Removes cubic shapes from Arch components @@ -4461,12 +4466,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Select non-manifold meshes - + Selects all non-manifold meshes from the document or from the selected groups Selects all non-manifold meshes from the document or from the selected groups @@ -4505,12 +4510,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh Split Mesh - + Splits selected meshes into independent components Splits selected meshes into independent components @@ -4539,12 +4544,12 @@ Floor creation aborted. Arch_Survey - + Survey Survey - + Starts survey Starts survey @@ -4552,12 +4557,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Toggle IFC Brep flag - + Force an object to be exported as Brep or not Force an object to be exported as Brep or not @@ -4565,12 +4570,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object diff --git a/src/Mod/Arch/Resources/translations/Arch_pl.qm b/src/Mod/Arch/Resources/translations/Arch_pl.qm index d3d4f41d33..74fbb348da 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_pl.qm and b/src/Mod/Arch/Resources/translations/Arch_pl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_pl.ts b/src/Mod/Arch/Resources/translations/Arch_pl.ts index 8dde9e4aa3..b7e464b179 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pl.ts @@ -574,47 +574,47 @@ Jeśli ma wartość Fałsz, elementy inne niż bryły również zostaną wycięte, co może prowadzić do nieprawidłowych wyników. - + The display length of this section plane Widoczna długość tej płaszczyzny przekroju - + The display height of this section plane Widoczna wysokość tej płaszczyzny przekroju - + The size of the arrows of this section plane Rozmiar strzałek na tej płaszczyźnie przekroju - + Show the cut in the 3D view Pokaż cięcie w widoku 3D - + The rendering mode to use Tryb renderowania - + If cut geometry is shown or not Jeżeli pokazana jest geometria cięcia, czy nie - + If cut geometry is filled or not Jeśli geometria cięcia jest wypełniona lub nie - + The size of the texts inside this object Rozmiar tekstów wewnątrz tego obiektu - + If checked, source objects are displayed regardless of being visible in the 3D model Jeśli jest zaznaczone, obiekty źródłowe są wyświetlane niezależnie od tego, czy są widoczne w modelu 3D @@ -769,7 +769,7 @@ Tekst do pokazania. Użyj $area, $label, $tag, $floor, $walls, $ceiling aby wstawić odpowiednie dane - + The name of the font Nazwa czcionki @@ -779,7 +779,7 @@ Kolor obszaru tekstu - + The size of the text font Rozmiar czcionki @@ -1039,12 +1039,12 @@ Lista grubości warstw - + The line color of the projected objects Kolor linii rzutowanych obiektów - + The color of the cut faces (if turned on) Kolor przyciętych powierzchni (jeśli jest włączony) @@ -1219,7 +1219,7 @@ Kształt tego obiektu - + The line width of this object Szerokość linii tego obiektu @@ -1349,17 +1349,17 @@ Obiekty, które muszą być uwzględnione w tej płaszczyźnie przekroju. Jeśli pole pozostanie puste, cały dokument zostanie uwzględniony. - + The transparency of this object Przezroczystość tego obiektu - + The color of this object Kolor tego obiektu - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Odległość między płaszczyzną cięcia i rzeczywistym widokiem cięcia (zachowaj bardzo małą wartość, ale nie zerową) @@ -1456,7 +1456,7 @@ The number of broken blocks - Liczba złamanych bloków + Liczba uszkodzonych bloków @@ -1989,7 +1989,7 @@ Określa, czy należy odwrócić nachylenie dachu - + Show the label in the 3D view Pokaż etykietę w widoku 3D @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length Jeśli wartość nie jest równa zero, osie nie są przedstawiane jako jedna pełna linia, lecz jako dwie linie o podanej długości + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Kąt - + is not closed nie jest zamknięty - + is not valid nie jest prawidłowy - + doesn't contain any solid nie zawiera żadnej bryły - + contains a non-closed solid zawiera niezamkniętą bryłę - + contains faces that are not part of any solid - zawiera fronty, które nie należą do żadnej bryły + zawiera ściany, które nie są częścią żadnej bryły - + Grouping Grupowanie - + Ungrouping Rozgrupuj - + Split Mesh Rozdziel siatkę - + Mesh to Shape Zazębia oczka siatki do kształtu @@ -2144,7 +2149,7 @@ Subtractions - Różnice + Operacja odejmowania @@ -2267,12 +2272,12 @@ plik %s utworzony pomyślnie. - + Add space boundary Dodaj granicę przestrzni - + Remove space boundary Usuń granicę przestrzeni @@ -2357,17 +2362,17 @@ Stwórz System Konstrukcyjny - + Object doesn't have settable IFC Attributes Obiekt nie posiada ustawialnych Atrybutów IFC - + Disabling Brep force flag of object Wyłączenie wymuszenia flagi Brep obiektu - + Enabling Brep force flag of object Włączenie wymuszenia flagi Brep obiektu @@ -2487,7 +2492,7 @@ Wysokość (mm) - + Create Component Tworzenie komponentu @@ -2512,22 +2517,22 @@ Kategoria - + Key Klucz - + Value Wartość - + Unit Jednostka - + Create IFC properties spreadsheet Utwórz arkusz kalkulacyjny właściwości IFC @@ -2727,7 +2732,7 @@ Zaimportuj plik CSV - + Export CSV File Eksportuj plik CSV @@ -2949,47 +2954,47 @@ Elementy okna - + Survey Badanie - + Set description Wprowadź opis - + Clear Wyczyść - + Copy Length Skopiuj Długość - + Copy Area Obszar kopiowania - + Export CSV Eksportuj CSV - + Description Opis - + Area Obszar - + Total Łącznie @@ -3039,17 +3044,17 @@ Utwórz Część Budynku - + Invalid cutplane Nieprawidłowa płaszczyzna cięcia - + All good! No problems found Wszystko w porządku! Nie znaleziono żadnych problemów - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Obiekt nie posiada atrybutu ifcWłaściwości. Anuluj tworzenie arkusza kalkulacyjnego dla obiektu: @@ -3204,37 +3209,37 @@ Stwórz zewnętrzne odniesienie - + Section plane settings Ustawienia płaszczyzny przekroju - + Objects seen by this section plane: Obiekty widoczene w tej płaszczyźnie przekroju: - + Section plane placement: Umiejscowienie płaszczyzny przekroju: - + Rotate X Obróć X - + Rotate Y Obróć Y - + Rotate Z Obróć Z - + Resize Zmień rozmiar @@ -3281,7 +3286,7 @@ Cannot compute blocks for wall - Nie można obliczyć bloczków dla ściany + Nie można obliczyć liczby bloków dla ściany @@ -3369,42 +3374,42 @@ Pomyślnie importowano - + Remove highlighted objects from the list above Usuń podświetlone obiekty z listy powyżej - + Add selected Dodaj zaznaczone - + Add selected object(s) to the scope of this section plane Dodaj wybrane obiekty do zakresu tej płaszczyzny przekroju - + Rotates the plane along the X axis Obróć płaszczyznę względem osi X - + Rotates the plane along the Y axis Obróć płaszczyznę względem osi Y - + Rotates the plane along the Z axis Obróć płaszczyznę względem osi Z - + Resizes the plane to fit the objects in the list above Zmień rozmiar płaszczyzny, aby dopasować obiekty z powyższej listy - + Centers the plane on the objects in the list above Wyśrodkuje płaszczyznę na obiektach znajdujących się powyżej @@ -3888,12 +3893,12 @@ Tworzenie piętra zostało przerwane. Arch_Add - + Add component Dodaj komponent - + Adds the selected components to the active object Dodaje zaznaczone komponenty do aktywnego obiektu @@ -3971,25 +3976,25 @@ Tworzenie piętra zostało przerwane. Arch_Check - + Check Sprawdź - + Checks the selected objects for problems - Sprawdza zaznaczone obiekty czy nie zawierają błędów + Sprawdza czy zaznaczone obiekty nie zawierają błędów Arch_CloneComponent - + Clone component Komponent klonu - + Clones an object as an undefined architectural component Klonuje obiekt jako niezdefiniowany komponent architektoniczny @@ -3997,25 +4002,25 @@ Tworzenie piętra zostało przerwane. Arch_CloseHoles - + Close holes Zamknij otwory - + Closes holes in open shapes, turning them solids - Zamyka otwory kształtów otwartych, zmienia je do stałych + Zamyka otwory kształtów otwartych, przekształcając je w bryły Arch_Component - + Component Komponent - + Creates an undefined architectural component Tworzy niezdefiniowany komponent architektoniczny @@ -4174,12 +4179,12 @@ Tworzenie piętra zostało przerwane. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Utwórz arkusz kalkulacyjny IFC ... - + Creates a spreadsheet to store IFC properties of an object. Tworzy arkusz do przechowywania właściwości Ifc obiektu. @@ -4221,14 +4226,14 @@ Tworzenie piętra zostało przerwane. Arch_MeshToShape - + Mesh to Shape Zazębia oczka siatki do kształtu - + Turns selected meshes into Part Shape objects - Włącza wybrane oczka w części kształtu obiektów + Zamienia zaznaczone siatki w obiekty Kształtu Części @@ -4393,12 +4398,12 @@ Tworzenie piętra zostało przerwane. Arch_Remove - + Remove component Usuń komponent - + Remove the selected components from their parents, or create a hole in a component Usuwa znaczone komponenty z elementów nadrzędnych lub utwórz otwór w komponencie @@ -4406,12 +4411,12 @@ Tworzenie piętra zostało przerwane. Arch_RemoveShape - + Remove Shape from Arch Usuń kształt z Architektury - + Removes cubic shapes from Arch components Usuwa sześcienne kształty ze składników Architektury @@ -4458,12 +4463,12 @@ Tworzenie piętra zostało przerwane. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Wybierz nieróżnorodne siatki - + Selects all non-manifold meshes from the document or from the selected groups Wybiera wszystkie nieróżnorodne siatki z dokumentu lub wybranych grup @@ -4502,12 +4507,12 @@ Tworzenie piętra zostało przerwane. Arch_SplitMesh - + Split Mesh Rozdziel siatkę - + Splits selected meshes into independent components Rozdziela wybrane siatki na niezależne komponenty @@ -4536,12 +4541,12 @@ Tworzenie piętra zostało przerwane. Arch_Survey - + Survey Badanie - + Starts survey Rozpoczyna badanie @@ -4549,12 +4554,12 @@ Tworzenie piętra zostało przerwane. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Przełącz znacznik IFC Brep - + Force an object to be exported as Brep or not Wymuś eksport obiektu jako Brep, lub nie @@ -4562,12 +4567,12 @@ Tworzenie piętra zostało przerwane. Arch_ToggleSubs - + Toggle subcomponents Podskładniki przełączania - + Shows or hides the subcomponents of this object Wyświetla lub ukrywa podkomponenty tego obiektu @@ -5012,7 +5017,7 @@ Pozostaw puste pole, aby użyć wszystkich obiektów z dokumentu Multimaterial definition - Definicja multimaterialna + Definicja materiału złożonego @@ -5170,12 +5175,12 @@ Pozostaw puste pole, aby użyć wszystkich obiektów z dokumentu This is the default color for new Wall objects - Kolor domyślny dla nowego obiektu Ściana + To jest domyślny kolor dla nowych obiektów ścian This is the default color for new Structure objects - Kolor domyślny dla nowego obiektu Konstrukcja + To jest domyślny kolor dla nowych obiektów konstrukcyjnych diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm b/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm index e72c075fe8..34fd8969ac 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm and b/src/Mod/Arch/Resources/translations/Arch_pt-BR.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts b/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts index f269032546..165cf8a78e 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pt-BR.ts @@ -574,47 +574,47 @@ Se falso, objetos não-sólidos também serão cortados, com possíveis resultados errados. - + The display length of this section plane O comprimento da representação 3D deste plano de corte - + The display height of this section plane A altura da representação 3D deste plano de corte - + The size of the arrows of this section plane O tamanho das setas deste plano de corte - + Show the cut in the 3D view Mostrar o corte na vista 3D - + The rendering mode to use O modo de renderização a ser usado - + If cut geometry is shown or not Se a geometria cortada é mostrada ou não - + If cut geometry is filled or not Se a geometria cortada é preenchida ou não - + The size of the texts inside this object O tamanho dos textos dentro deste objeto - + If checked, source objects are displayed regardless of being visible in the 3D model Se esta casa estiver marcada, objetos fonte serão exibidos mesmo se estão invisíveis na vista 3D @@ -769,7 +769,7 @@ O texto a ser exibido. Use $area, $label, $tag, $floor, $walls, $ceiling para inserir os respectivos dados - + The name of the font O nome da fonte @@ -779,7 +779,7 @@ A cor do texto da área - + The size of the text font O tamanho da fonte do texto @@ -1039,12 +1039,12 @@ A lista de espessuras das camadas - + The line color of the projected objects A cor da linha dos objetos projetados - + The color of the cut faces (if turned on) A cor das faces cortadas (se ativado) @@ -1219,7 +1219,7 @@ A forma deste objeto - + The line width of this object A largura da linha deste objeto @@ -1349,17 +1349,17 @@ Os objetos que devem ser considerados por este plano de corte. Vazio significa: todos os objetos do documento. - + The transparency of this object A transparência deste objeto - + The color of this object A cor deste objeto - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) A distância entre o plano de corte e o corte real da vista (mantenha este valor muito pequeno, mas não zero) @@ -1989,7 +1989,7 @@ Especifica se a direção do telhado deve ser invertida - + Show the label in the 3D view Mostrar o rótulo na vista 3D @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length Se não for zero, os eixos não são representados como uma linha inteira, mas como duas linhas do comprimento dado + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Ângulo - + is not closed não está fechado - + is not valid não é válido - + doesn't contain any solid não contém nenhum sólido - + contains a non-closed solid contém um sólido aberto - + contains faces that are not part of any solid contém faces que não pertencem a nenhum sólido - + Grouping Agrupando - + Ungrouping Desagrupando - + Split Mesh Dividir malha - + Mesh to Shape Malha para Forma @@ -2267,12 +2272,12 @@ O arquivo %s foi criado com sucesso. - + Add space boundary Adicionar um limite de espaço - + Remove space boundary Remover um limite de espaço @@ -2357,17 +2362,17 @@ Criar sistema estrutural - + Object doesn't have settable IFC Attributes Este objeto não possuí atributos IFC configuráveis - + Disabling Brep force flag of object Desativando o modo Brep deste objeto - + Enabling Brep force flag of object Ativando o modo Brep deste objeto @@ -2487,7 +2492,7 @@ Altura (mm) - + Create Component Criar Componente @@ -2512,22 +2517,22 @@ Categoria - + Key Chave - + Value Valor - + Unit Unidade - + Create IFC properties spreadsheet Criar planilhas para propriedades IFC @@ -2727,7 +2732,7 @@ Importar um arquivo CSV - + Export CSV File Exportar um arquivo CSV @@ -2949,47 +2954,47 @@ Elementos da janela - + Survey Quantitativo - + Set description Definir descrição - + Clear Limpar - + Copy Length Copiar comprimento - + Copy Area Copiar área - + Export CSV Exportar para CSV - + Description Descrição - + Area Área - + Total Total @@ -3039,17 +3044,17 @@ Criar uma Parte do Edifício - + Invalid cutplane Plano de corte inválido - + All good! No problems found Está tudo bem! nenhum problema foi encontrado - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: O objeto não tem o atributo IfcProperties. Cancelar criação de planilha para o objeto: @@ -3204,37 +3209,37 @@ Criar referência externa - + Section plane settings Configurações do plano de corte - + Objects seen by this section plane: Objetos vistos por este plano de corte: - + Section plane placement: Localizador deste plano de corte: - + Rotate X Rotação X - + Rotate Y Rotação Y - + Rotate Z Rotação Z - + Resize Redimensionar @@ -3369,42 +3374,42 @@ Importado com sucesso - + Remove highlighted objects from the list above Remover objetos destacados da lista acima - + Add selected Adicionar selecionados - + Add selected object(s) to the scope of this section plane Adicionar objeto(s) selecionado(s) ao escopo deste plano de secção - + Rotates the plane along the X axis Rotacionar o plano ao longo do eixo X - + Rotates the plane along the Y axis Rotacionar o plano ao longo do eixo Y - + Rotates the plane along the Z axis Rotacionar o plano ao longo do eixo Z - + Resizes the plane to fit the objects in the list above Redimensiona o plano para que os objetos da lista acima caibam - + Centers the plane on the objects in the list above Centraliza o plano na lista de objetos acima @@ -3871,12 +3876,12 @@ Floor creation aborted. Arch_Add - + Add component Adicionar componentes - + Adds the selected components to the active object Adiciona os componentes selecionados ao objeto ativo @@ -3954,12 +3959,12 @@ Floor creation aborted. Arch_Check - + Check Verificar - + Checks the selected objects for problems Verifica problemas nos objetos selecionados @@ -3967,12 +3972,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component Clonar componente - + Clones an object as an undefined architectural component Cria um componente arquitetônico indefinido @@ -3980,12 +3985,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes Fechar furos - + Closes holes in open shapes, turning them solids Fecha furos em formas abertas, transformando-as em sólidos @@ -3993,12 +3998,12 @@ Floor creation aborted. Arch_Component - + Component Componente - + Creates an undefined architectural component Cria um componente arquitetônico indefinido @@ -4157,12 +4162,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Criar planilha IFC... - + Creates a spreadsheet to store IFC properties of an object. Cria uma planilha para armazenar as propriedades IFC de um objeto. @@ -4204,12 +4209,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape Malha para Forma - + Turns selected meshes into Part Shape objects Transforma as malhas selecionadas em formas @@ -4376,12 +4381,12 @@ Floor creation aborted. Arch_Remove - + Remove component Remover componentes - + Remove the selected components from their parents, or create a hole in a component Remove os componentes selecionados de seus objetos-pai, ou cria um buraco em um componente @@ -4389,12 +4394,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Remover forma - + Removes cubic shapes from Arch components Remove formas cúbicas de objetos arquitetônicos @@ -4441,12 +4446,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Selecionar malhas não sólidas - + Selects all non-manifold meshes from the document or from the selected groups Seleciona todas as malhas não sólidas do documento ou dos grupos selecionados @@ -4485,12 +4490,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh Dividir malha - + Splits selected meshes into independent components Divide as malhas selecionadas em componentes independentes @@ -4519,12 +4524,12 @@ Floor creation aborted. Arch_Survey - + Survey Quantitativo - + Starts survey Inicia o modo quantitativo @@ -4532,12 +4537,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Troca modo Brep - + Force an object to be exported as Brep or not Força ou não um objeto a ser exportado como Brep no formato IFC @@ -4545,12 +4550,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents Alternar sucomponentes - + Shows or hides the subcomponents of this object Mostra ou oculta os subcomponentes do objeto diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm b/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm index 1814a561aa..bc9ea0d839 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm and b/src/Mod/Arch/Resources/translations/Arch_pt-PT.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts b/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts index 76a65c0613..ab73f95e7f 100644 --- a/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts +++ b/src/Mod/Arch/Resources/translations/Arch_pt-PT.ts @@ -574,47 +574,47 @@ Se falso, não-sólidos serão também cortados, com possíveis resultados errados. - + The display length of this section plane Comprimento da representação 3D deste plano de corte - + The display height of this section plane Altura da representação 3D deste plano de corte - + The size of the arrows of this section plane Tamanho das setas deste plano de corte - + Show the cut in the 3D view Mostrar o corte na vista 3D - + The rendering mode to use O modo de renderização a ser usado - + If cut geometry is shown or not Se a geometria cortada é mostrada ou não - + If cut geometry is filled or not Se a geometria cortada é preenchida ou não - + The size of the texts inside this object O tamanho dos textos dentro deste objeto - + If checked, source objects are displayed regardless of being visible in the 3D model Se marcado, objetos são mostrados independente de estarem visível no modelo 3D @@ -769,7 +769,7 @@ Texto a ser exibido. Usar $area, $label, $tag, $floor, $walls, $ceiling para inserir os respetivos dados - + The name of the font Nome da fonte @@ -779,7 +779,7 @@ A cor do texto da área - + The size of the text font O tamanho da fonte do texto @@ -1039,12 +1039,12 @@ A lista de espessuras das camadas - + The line color of the projected objects A cor da linha dos objetos projetados - + The color of the cut faces (if turned on) A cor das faces cortadas (se ativado) @@ -1219,7 +1219,7 @@ A forma deste objeto - + The line width of this object A largura da linha deste objeto @@ -1349,17 +1349,17 @@ Os objetos que devem ser considerados por este plano de corte. Vazio significa o documento inteiro. - + The transparency of this object A transparência deste objeto - + The color of this object A cor deste objeto - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) A distância entre o plano de corte e o corte real da vista (mantenha este valor muito pequeno, mas não zero) @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Mostrar o rótulo na vista 3D @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length Se não for zero, os eixos não são representados como uma linha completa, mas antes como duas linhas do comprimento indicado + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Ângulo - + is not closed não está fechada - + is not valid não é válido - + doesn't contain any solid não contém qualquer sólido - + contains a non-closed solid contém um sólido não fechado - + contains faces that are not part of any solid contém as faces que não são parte de qualquer sólido - + Grouping Agrupar - + Ungrouping Desagrupar - + Split Mesh Dividir Malha - + Mesh to Shape Malha para Forma @@ -2267,12 +2272,12 @@ ficheiro %s criado com exito. - + Add space boundary Adicionar limite de espaço - + Remove space boundary Remover limite de espaço @@ -2357,17 +2362,17 @@ Criar sistema estrutural - + Object doesn't have settable IFC Attributes Este objeto não possuí atributos IFC configuráveis - + Disabling Brep force flag of object Desativar o modo Brep deste objeto - + Enabling Brep force flag of object Ativar o modo Brep deste objeto @@ -2487,7 +2492,7 @@ Altura (mm) - + Create Component Criar componente @@ -2512,22 +2517,22 @@ Categoria - + Key Chave - + Value Valor - + Unit Unidade - + Create IFC properties spreadsheet Criar tabela de propriedades IFC @@ -2727,7 +2732,7 @@ Importar um ficheiro CSV - + Export CSV File Exportar um ficheiro CSV @@ -2949,47 +2954,47 @@ Elementos da janela - + Survey Recolha de dados - + Set description Definir descrição - + Clear Limpar - + Copy Length Copiar comprimento - + Copy Area Copiar área - + Export CSV Exportar CSV - + Description Descrição - + Area Área - + Total Total @@ -3039,17 +3044,17 @@ Criar Parte de Edifício - + Invalid cutplane Plano de corte inválido - + All good! No problems found Tudo bem! Não foram encontrados problemas - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: O objeto não tem o atributo IfcProperties. Cancelar criação da Tabela (folha de cálculo) para o objeto: @@ -3204,37 +3209,37 @@ Criar referência externa - + Section plane settings Configurações do plano de corte - + Objects seen by this section plane: Objetos vistos por este plano de corte: - + Section plane placement: Posição do plano de corte: - + Rotate X Rodar X - + Rotate Y Rodar Y - + Rotate Z Rodar Z - + Resize Redimensionar @@ -3369,42 +3374,42 @@ Importado com sucesso - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Adicionar selecionados - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Girar o plano em torno do eixo X - + Rotates the plane along the Y axis Girar o plano em torno do eixo Y - + Rotates the plane along the Z axis Girar o plano em torno do eixo Z - + Resizes the plane to fit the objects in the list above Redimensiona o plano para que inclua os objetos da lista acima - + Centers the plane on the objects in the list above Centra o plano nos objetos da lista acima @@ -3891,12 +3896,12 @@ Criação de Piso (andar) abortada. Arch_Add - + Add component Adicionar componente - + Adds the selected components to the active object Adiciona os componentes selecionados ao objeto ativo @@ -3974,12 +3979,12 @@ Criação de Piso (andar) abortada. Arch_Check - + Check Verificar - + Checks the selected objects for problems Verifica os objetos selecionados para ver se existem problemas @@ -3987,12 +3992,12 @@ Criação de Piso (andar) abortada. Arch_CloneComponent - + Clone component Clonar componente - + Clones an object as an undefined architectural component Cria um componente arquitetónico indefinido @@ -4000,12 +4005,12 @@ Criação de Piso (andar) abortada. Arch_CloseHoles - + Close holes Fechar buracos - + Closes holes in open shapes, turning them solids Fecha buracos em formas abertas, transformando-os em sólidos @@ -4013,12 +4018,12 @@ Criação de Piso (andar) abortada. Arch_Component - + Component Componente - + Creates an undefined architectural component Cria um componente arquitectónico indefinido @@ -4177,12 +4182,12 @@ Criação de Piso (andar) abortada. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Crie tabela IFC... - + Creates a spreadsheet to store IFC properties of an object. Cria uma Tabela (folha de cálculo) para armazenar as propriedades IFC de um objeto. @@ -4224,12 +4229,12 @@ Criação de Piso (andar) abortada. Arch_MeshToShape - + Mesh to Shape Malha para Forma - + Turns selected meshes into Part Shape objects Transforma as malhas selecionadas em objetos de forma de Peças @@ -4396,12 +4401,12 @@ Criação de Piso (andar) abortada. Arch_Remove - + Remove component Remover componente - + Remove the selected components from their parents, or create a hole in a component Remove os componentes selecionados dos seus "hospedeiros", ou cria um buraco num componente @@ -4409,12 +4414,12 @@ Criação de Piso (andar) abortada. Arch_RemoveShape - + Remove Shape from Arch Remover Forma - + Removes cubic shapes from Arch components Remove formas cúbicas de objetos arquitectónicos @@ -4461,12 +4466,12 @@ Criação de Piso (andar) abortada. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Selecionar malhas (meshes) não sólidas - + Selects all non-manifold meshes from the document or from the selected groups Seleciona todas as malhas (meshes) não sólidas do documento ou dos grupos selecionados @@ -4505,12 +4510,12 @@ Criação de Piso (andar) abortada. Arch_SplitMesh - + Split Mesh Dividir Malha - + Splits selected meshes into independent components Divide as malhas selecionadas em componentes independentes @@ -4539,12 +4544,12 @@ Criação de Piso (andar) abortada. Arch_Survey - + Survey Recolha de dados - + Starts survey Iniciar recolha de dados @@ -4552,12 +4557,12 @@ Criação de Piso (andar) abortada. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Alternar modo Brep - + Force an object to be exported as Brep or not Força um objeto a ser exportado ou não como Brep no formato Ifc @@ -4565,12 +4570,12 @@ Criação de Piso (andar) abortada. Arch_ToggleSubs - + Toggle subcomponents Alternar sucomponentes - + Shows or hides the subcomponents of this object Mostra ou oculta os subcomponentes do objeto diff --git a/src/Mod/Arch/Resources/translations/Arch_ro.qm b/src/Mod/Arch/Resources/translations/Arch_ro.qm index cd75577ded..0ee26a6956 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ro.qm and b/src/Mod/Arch/Resources/translations/Arch_ro.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ro.ts b/src/Mod/Arch/Resources/translations/Arch_ro.ts index 55d41211db..7ad0659b0b 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ro.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ro.ts @@ -574,47 +574,47 @@ Dacă valoarea este <<false>>, elementele non solide vor fi de asemenea secționate, posibil să se obțină rezultate imprevizibile. - + The display length of this section plane Lungimea vederii de afișare al acestui plan de secționare - + The display height of this section plane Înălțimea vederii de afișare a acestui plan de secționare - + The size of the arrows of this section plane Dimensiunea săgeţilor acestui plan de secțiune - + Show the cut in the 3D view Arată secțiunea în vizualizarea 3D - + The rendering mode to use Modul de redare de utilizat - + If cut geometry is shown or not Dacă geometria secțiunii este afișată sau nu - + If cut geometry is filled or not Dacă geometria secțiunii este umplută sau nu - + The size of the texts inside this object Dimensiunea textelor în interiorul acestui obiect - + If checked, source objects are displayed regardless of being visible in the 3D model În cazul în care bifat, sursa de obiecte sunt afişată indiferent dacă sunt vizibile sau nu în modelul 3D @@ -769,7 +769,7 @@ Textul să arate. Utilizaţi $area, $label, $tag, $floor, $walls, $ceiling pentru a insera datele respective - + The name of the font Numele fontului @@ -779,7 +779,7 @@ Culoarea textului din aria respectiva - + The size of the text font Dimensiunea fontului din text @@ -1039,12 +1039,12 @@ Lista de grosimi de strat - + The line color of the projected objects Culoarea obiectelor proiectate - + The color of the cut faces (if turned on) Culoarea tăiate feţele (dacă este activată) @@ -1219,7 +1219,7 @@ Forma acestui obiect - + The line width of this object Lățimea liniei acestui obiect @@ -1349,17 +1349,17 @@ Obiectele care trebuiesc luate în considerare de acest plan de secționare. Gol înseamnă tot documentul. - + The transparency of this object Transparenţa acestui obiect - + The color of this object Culoare acest obiect - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Distanța dintre planul de secțiune și planul actual de vedere (păstrează o valoare foarte mică, dar nu zero) @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Show the label in the 3D view @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Unghi - + is not closed nu este închis - + is not valid nu este valid - + doesn't contain any solid nu conține nici un solid - + contains a non-closed solid conţine un solid deschis - + contains faces that are not part of any solid conţine feţe care nu sunt parte a nici unui solid - + Grouping Gruparea - + Ungrouping Anularea grupării - + Split Mesh Divide plasa - + Mesh to Shape Discretizare în forma @@ -2267,12 +2272,12 @@ fişierul %s a fost creat cu succes. - + Add space boundary Adaugă limită de spaţiu - + Remove space boundary Elimină limită de spațiu @@ -2357,17 +2362,17 @@ Crează sistem structural - + Object doesn't have settable IFC Attributes Obiectul nu are atribute IFC reglabile - + Disabling Brep force flag of object Dezactivarea Brep force flag-ul obiectului - + Enabling Brep force flag of object Activarea Brep force flag-ul obiectului @@ -2487,7 +2492,7 @@ Înălțime (mm) - + Create Component Creare component @@ -2512,22 +2517,22 @@ Categorie - + Key Tastă - + Value Valoare - + Unit Unitate - + Create IFC properties spreadsheet Création d'une feuille de calcul de propriétés Ifc @@ -2727,7 +2732,7 @@ Importă fișierul CSV - + Export CSV File Exporta fisierul CSV @@ -2949,47 +2954,47 @@ Élémente ale ferestrei - + Survey Sondaj - + Set description Setaţi o descriere - + Clear Șterge - + Copy Length Copiază lungimea - + Copy Area Copiază suprafața - + Export CSV Export CSV - + Description Descriere - + Area Suprafață - + Total Total @@ -3039,17 +3044,17 @@ Creați BuildingPart - + Invalid cutplane Plan de tăiere invalid - + All good! No problems found Toate bune! Nici o problemă identificată - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Obiectul nu posedă atributul IfcProperties. Annulați crearea foii de calcul pentru obiectul: @@ -3204,37 +3209,37 @@ Creează o referință externă - + Section plane settings Reglarea planului de secțiune - + Objects seen by this section plane: Obiect vizualizat în acest plan: - + Section plane placement: Amplasamentul planului de secțiune: - + Rotate X Rotaţie X - + Rotate Y Rotaţie Y - + Rotate Z Rotaţie Z - + Resize Redimensionați @@ -3369,42 +3374,42 @@ Import efectuat cu succes - + Remove highlighted objects from the list above Eliminați obiectele evidențiate din lista de mai sus - + Add selected Adaugă Selecția - + Add selected object(s) to the scope of this section plane Adăugați obiectul(ele) selectate la spațiul planului de sețiune - + Rotates the plane along the X axis Rotiți planul în jurul axei Y - + Rotates the plane along the Y axis Rotiți planul în jurul axei X - + Rotates the plane along the Z axis Rotiți planul în jurul axei Z - + Resizes the plane to fit the objects in the list above Redimensionează planul pentru a se potrivi la obiectele din lista de mai sus - + Centers the plane on the objects in the list above Centrează planul pentru a se potrivi pe obiectele din lista de mai sus @@ -3891,12 +3896,12 @@ Floor creation aborted. Arch_Add - + Add component Adaugă componentă - + Adds the selected components to the active object Adaugă componentele selectate în obiectul activ @@ -3974,12 +3979,12 @@ Floor creation aborted. Arch_Check - + Check Verifică - + Checks the selected objects for problems Verifică obiectele selectate pentru probleme @@ -3987,12 +3992,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component Clona componentă - + Clones an object as an undefined architectural component Clone un obiect ca o componentă arhitecturale nedefinit @@ -4000,12 +4005,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes Închide găuri - + Closes holes in open shapes, turning them solids Închide găurile din formele deschise, transformându-le în solide @@ -4013,12 +4018,12 @@ Floor creation aborted. Arch_Component - + Component Componenta - + Creates an undefined architectural component Creează o componentă arhitecturale nedefinită @@ -4177,12 +4182,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Creare foaie de calcul IFPC... - + Creates a spreadsheet to store IFC properties of an object. Creează o foaie de calcul pentru a stoca proprietățile IFC ale unui obiect. @@ -4224,12 +4229,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape Discretizare în forma - + Turns selected meshes into Part Shape objects Transformă plaselee selectate în obiecte forma @@ -4396,12 +4401,12 @@ Floor creation aborted. Arch_Remove - + Remove component Elimină componentă - + Remove the selected components from their parents, or create a hole in a component Elimină componentele selectate din obiectele-părinte sau crează o gaură în componentă @@ -4409,12 +4414,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Înlătura forma din arhitectura - + Removes cubic shapes from Arch components Înlătura formele cubice din componentele arhitecturale @@ -4461,12 +4466,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Selectaţi plasele ne-manufacturabile - + Selects all non-manifold meshes from the document or from the selected groups Selectaţi toate plasele ne-manufacturabile din document sau din grupurile selectate @@ -4505,12 +4510,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh Divide plasa - + Splits selected meshes into independent components Împarte ochiuri de plasă selectate în componente independente @@ -4539,12 +4544,12 @@ Floor creation aborted. Arch_Survey - + Survey Sondaj - + Starts survey Pornește sondajul @@ -4552,12 +4557,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Activează /dezactivează marcajul Brep IFC - + Force an object to be exported as Brep or not Forţează un obiect să fie exportat ca Brep sau nu @@ -4565,12 +4570,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents Activează/dezactivează subcomponente - + Shows or hides the subcomponents of this object Afişează sau ascunde subcomponente de acest obiect diff --git a/src/Mod/Arch/Resources/translations/Arch_ru.qm b/src/Mod/Arch/Resources/translations/Arch_ru.qm index 1750569ed3..0562c8a095 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_ru.qm and b/src/Mod/Arch/Resources/translations/Arch_ru.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_ru.ts b/src/Mod/Arch/Resources/translations/Arch_ru.ts index f66dabf213..725d721aa8 100644 --- a/src/Mod/Arch/Resources/translations/Arch_ru.ts +++ b/src/Mod/Arch/Resources/translations/Arch_ru.ts @@ -574,47 +574,47 @@ Если ложь, также будет сделано сечение нетвердотельных объектов. Возможно, с некорректным результатом. - + The display length of this section plane Отображение длины плоскости сечения - + The display height of this section plane Отображение высоты плоскости сечения - + The size of the arrows of this section plane Размер углов плоскости сечения - + Show the cut in the 3D view Показать сечение в трёхмерном виде - + The rendering mode to use Используемый режим визуализации - + If cut geometry is shown or not Показывать ли сечение геометрии или нет - + If cut geometry is filled or not Делать ли заливку обрезанной геометрии или нет - + The size of the texts inside this object Размер текста внутри объекта - + If checked, source objects are displayed regardless of being visible in the 3D model Если флажок установлен, исходные объекты отображаются независимо от видимости в 3D-модели @@ -769,7 +769,7 @@ Отображаемый текст. Используйте $area, $label, $tag, $floor, $walls, $ceiling для вставки соответствующих данных - + The name of the font Название шрифта @@ -779,7 +779,7 @@ Цвет текста в области - + The size of the text font Размер шрифта @@ -1039,12 +1039,12 @@ Список толщин слоя - + The line color of the projected objects Цвет линии проецируемых объектов - + The color of the cut faces (if turned on) Цвет сечения граней (если включен) @@ -1219,7 +1219,7 @@ Форма этого объекта - + The line width of this object Ширина линий этого объекта @@ -1349,17 +1349,17 @@ Объекты, которые должны быть видны на этой плоскости сечения. Пустой означает весь документ. - + The transparency of this object Прозрачность этого объекта - + The color of this object Цвет этого объекта - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Расстояние между плоскостью сечения и сечением текущего вида(устанавливайте очень маленькое, но не нулевое значение) @@ -1989,7 +1989,7 @@ Указывает, следует ли разворачивать направление крыши - + Show the label in the 3D view Отображение метки в представлении 3D @@ -2036,7 +2036,12 @@ If not zero, the axes are not represented as one full line but as two lines of the given length - If not zero, the axes are not represented as one full line but as two lines of the given length + Если не равен нулю, ось не представлена как одна полная линия, а как две линии заданной длины + + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. @@ -2087,47 +2092,47 @@ Угол - + is not closed не замкнут - + is not valid недопустим - + doesn't contain any solid не содержит каких-либо твердотельных объектов - + contains a non-closed solid содержит незамкнутый твердотельный объект - + contains faces that are not part of any solid содержит грани, которые не являются частью каких-либо тел - + Grouping Группировка - + Ungrouping Разгруппировка - + Split Mesh Разделить Полигональную сетку - + Mesh to Shape Сетку — в Фигуру @@ -2267,12 +2272,12 @@ файл %s успешно создан. - + Add space boundary Добавить отступ - + Remove space boundary Убрать отступ @@ -2357,17 +2362,17 @@ Создать структурную систему - + Object doesn't have settable IFC Attributes Объект не имеет настраиваемых параметров IFC - + Disabling Brep force flag of object Отключение BREP-флага объекта - + Enabling Brep force flag of object Включение BREP-флага объекта @@ -2487,7 +2492,7 @@ Высота (мм) - + Create Component Создать Компонент @@ -2512,22 +2517,22 @@ Категория - + Key Клавиша - + Value Значение - + Unit Единица измерения - + Create IFC properties spreadsheet Создать таблицу свойств IFC @@ -2727,7 +2732,7 @@ Импорт CSV-файла - + Export CSV File Экспортировать в CSV-файл @@ -2949,47 +2954,47 @@ Элементы окна - + Survey Анализ - + Set description Задать описание - + Clear Очистить - + Copy Length Копировать длину - + Copy Area Копировать Площадь - + Export CSV Экспортировать в CSV - + Description Описание - + Area Площадь - + Total Итог @@ -3039,17 +3044,17 @@ Создать строительную деталь - + Invalid cutplane Недопустимая плоскость обрезки - + All good! No problems found Все в порядке! Проблем не найдено - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Объект не имеет атрибута IfcProperties. Отменить создание таблицы для объекта: @@ -3204,37 +3209,37 @@ Создать внешнюю ссылку - + Section plane settings Настройки плоскости сечения - + Objects seen by this section plane: Объекты, видимые плоскостью сечения: - + Section plane placement: Размещение плоскости сечения: - + Rotate X Повернуть по X - + Rotate Y Повернуть по Y - + Rotate Z Повернуть по Z - + Resize Изменить размер @@ -3369,42 +3374,42 @@ Успешно импортировано - + Remove highlighted objects from the list above Удалите выделенные объекты из списка выше - + Add selected Добавить выбранное - + Add selected object(s) to the scope of this section plane Добавить выбранный объект(ы) в область этой плоскости сечения - + Rotates the plane along the X axis Поворачивает плоскость вдоль оси X - + Rotates the plane along the Y axis Поворачивает плоскость вдоль оси Y - + Rotates the plane along the Z axis Поворачивает плоскость вдоль оси Z - + Resizes the plane to fit the objects in the list above Изменяет плоскость по размеру объектов в списке - + Centers the plane on the objects in the list above Центровать плоскость по объектам в списке @@ -3888,12 +3893,12 @@ Floor creation aborted. Arch_Add - + Add component Добавить компонент - + Adds the selected components to the active object Добавляет активному объекту выбранные компоненты @@ -3971,12 +3976,12 @@ Floor creation aborted. Arch_Check - + Check Проверить - + Checks the selected objects for problems Проверяет выбранные объекты на ошибки @@ -3984,12 +3989,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component Клонировать компонент - + Clones an object as an undefined architectural component Клонирует объект как неопределённый архитектурный компонент @@ -3997,12 +4002,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes Замкнуть отверстия - + Closes holes in open shapes, turning them solids Замыкает отверстия в незамкнутых фигурах, преобразовывая их в твердотельный объект @@ -4010,12 +4015,12 @@ Floor creation aborted. Arch_Component - + Component Компонент - + Creates an undefined architectural component Создаёт неопределённый архитектурный компонент @@ -4174,12 +4179,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Создать IFC-таблицу... - + Creates a spreadsheet to store IFC properties of an object. Создаёт таблицу для хранения IFC-свойств объекта. @@ -4221,12 +4226,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape Сетку — в Фигуру - + Turns selected meshes into Part Shape objects Преобразовывает выбранные полигональные сетки в объекты деталей @@ -4393,12 +4398,12 @@ Floor creation aborted. Arch_Remove - + Remove component Удалить компонент - + Remove the selected components from their parents, or create a hole in a component Удалить выбранные компоненты из их родителей, или создать отверстие в компоненте @@ -4406,12 +4411,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Удалить Фигуру из Архитектуры - + Removes cubic shapes from Arch components Удаляет кубические фигуры из компонентов Архитектуры @@ -4458,12 +4463,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Выбрать незамкнутые полигональные сетки - + Selects all non-manifold meshes from the document or from the selected groups Выбрать все незамкнутые полигональные сетки из документа или из выбранных групп @@ -4502,12 +4507,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh Разделить Полигональную сетку - + Splits selected meshes into independent components Разделяет выбранные полигональные сетки на независимые компоненты @@ -4536,12 +4541,12 @@ Floor creation aborted. Arch_Survey - + Survey Анализ - + Starts survey Запускает анализ @@ -4549,12 +4554,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Переключение IFC BREP-флага объекта - + Force an object to be exported as Brep or not Экспортировать как BREP-объект или нет @@ -4562,12 +4567,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents Переключить подкомпоненты - + Shows or hides the subcomponents of this object Показывает или скрывает подкомпоненты объекта diff --git a/src/Mod/Arch/Resources/translations/Arch_sk.qm b/src/Mod/Arch/Resources/translations/Arch_sk.qm index e8377451c5..675e888710 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sk.qm and b/src/Mod/Arch/Resources/translations/Arch_sk.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sk.ts b/src/Mod/Arch/Resources/translations/Arch_sk.ts index 8ebcb7cb46..7f1a997ef5 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sk.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sk.ts @@ -574,47 +574,47 @@ If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Show the cut in the 3D view - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model @@ -769,7 +769,7 @@ The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - + The name of the font The name of the font @@ -779,7 +779,7 @@ The color of the area text - + The size of the text font The size of the text font @@ -1039,12 +1039,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1219,7 +1219,7 @@ The shape of this object - + The line width of this object The line width of this object @@ -1349,17 +1349,17 @@ The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Show the label in the 3D view @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Uhol - + is not closed nieje uzatvorená - + is not valid nieje platná - + doesn't contain any solid neobsahuje žiadne teleso - + contains a non-closed solid obsahuje neuzatvorené teleso - + contains faces that are not part of any solid obsahuje plochy ktoré nie sú časťami telesa - + Grouping Zoskupenie - + Ungrouping Rozdeliť Skupinu - + Split Mesh Rozdeliť sieť - + Mesh to Shape Sieť do tvaru @@ -2267,12 +2272,12 @@ file %s successfully created. - + Add space boundary Add space boundary - + Remove space boundary Remove space boundary @@ -2357,17 +2362,17 @@ Create Structural System - + Object doesn't have settable IFC Attributes Object doesn't have settable IFC Attributes - + Disabling Brep force flag of object Disabling Brep force flag of object - + Enabling Brep force flag of object Enabling Brep force flag of object @@ -2487,7 +2492,7 @@ Height (mm) - + Create Component Create Component @@ -2512,22 +2517,22 @@ Kategória - + Key Key - + Value Hodnota - + Unit Jednotka - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2727,7 +2732,7 @@ Import CSV File - + Export CSV File Export CSV File @@ -2949,47 +2954,47 @@ Window elements - + Survey Survey - + Set description Set description - + Clear Vymazať - + Copy Length Copy Length - + Copy Area Kopírovať oblasť - + Export CSV Export CSV - + Description Popis - + Area Oblasť - + Total Total @@ -3039,17 +3044,17 @@ Create BuildingPart - + Invalid cutplane Invalid cutplane - + All good! No problems found All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -3204,37 +3209,37 @@ Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3369,42 +3374,42 @@ Successfully imported - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3891,12 +3896,12 @@ Floor creation aborted. Arch_Add - + Add component Pridaj komponent - + Adds the selected components to the active object Pridať vybraté komponenty k aktívnym objektom @@ -3974,12 +3979,12 @@ Floor creation aborted. Arch_Check - + Check Check - + Checks the selected objects for problems Checks the selected objects for problems @@ -3987,12 +3992,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Clones an object as an undefined architectural component @@ -4000,12 +4005,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes Close holes - + Closes holes in open shapes, turning them solids Closes holes in open shapes, turning them solids @@ -4013,12 +4018,12 @@ Floor creation aborted. Arch_Component - + Component Component - + Creates an undefined architectural component Creates an undefined architectural component @@ -4177,12 +4182,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Create IFC spreadsheet... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -4224,12 +4229,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape Sieť do tvaru - + Turns selected meshes into Part Shape objects Turns selected meshes into Part Shape objects @@ -4396,12 +4401,12 @@ Floor creation aborted. Arch_Remove - + Remove component Odstrániť časť - + Remove the selected components from their parents, or create a hole in a component Odstrániť vybrané komponenty od svojich nadradených objektov, alebo vytvoriť dieru v časti @@ -4409,12 +4414,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Odstrániť tvar z oblúka - + Removes cubic shapes from Arch components Odstráni kockové tvary z oblúkových komponentov @@ -4461,12 +4466,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Označ non-manifold siete - + Selects all non-manifold meshes from the document or from the selected groups Vyberie všetky non-manifold siete z dokumentu alebo z vybranej skupiny @@ -4505,12 +4510,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh Rozdeliť sieť - + Splits selected meshes into independent components Rozdelí označené siete na nezávislé komponenty @@ -4539,12 +4544,12 @@ Floor creation aborted. Arch_Survey - + Survey Survey - + Starts survey Starts survey @@ -4552,12 +4557,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Toggle IFC Brep flag - + Force an object to be exported as Brep or not Force an object to be exported as Brep or not @@ -4565,12 +4570,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object diff --git a/src/Mod/Arch/Resources/translations/Arch_sl.qm b/src/Mod/Arch/Resources/translations/Arch_sl.qm index 4f4971fa12..d12f5367d7 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sl.qm and b/src/Mod/Arch/Resources/translations/Arch_sl.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sl.ts b/src/Mod/Arch/Resources/translations/Arch_sl.ts index e86c2aa251..840c260a21 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sl.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sl.ts @@ -574,47 +574,47 @@ Če je narobe, bodo prerezani tudi nepolni predmeti z možnimi napačnimi rezultati. - + The display length of this section plane Prikazana dolžina te presečne ravnine - + The display height of this section plane Prikazana višina te prečne ravnine - + The size of the arrows of this section plane Velikost puščic te presečne ravnine - + Show the cut in the 3D view Prikaži prerez v pogledu 3D - + The rendering mode to use Uporabljen način prikaza - + If cut geometry is shown or not Če je rezna geometrija prikazana ali ne - + If cut geometry is filled or not Če je rezna geometrija polnjena ali ne - + The size of the texts inside this object Velikost pisave znotraj predmeta - + If checked, source objects are displayed regardless of being visible in the 3D model Kadar obkljukano, izvori predmetov so prikazani ne glede na to ali so vidni v 3D modelu @@ -769,7 +769,7 @@ Besedilo za prikaz. Uporabi $area, $label, $tag, $floor, $walls, $ceiling za vstavitev ustreznih podatkov - + The name of the font Ime pisave besedila @@ -779,7 +779,7 @@ Barva besedila površine - + The size of the text font Velikost pisave besedila @@ -1039,12 +1039,12 @@ Seznam debeline slojev - + The line color of the projected objects Barva črt preslikanih predmetov - + The color of the cut faces (if turned on) Barva rezanih ploskev (če je vklopljeno) @@ -1219,7 +1219,7 @@ Oblika tega objekta - + The line width of this object Debelina črt tega predmeta @@ -1349,17 +1349,17 @@ Predmeti, ki morajo biti v prerezni ravnini zajeti. Prazno pomeni celoten dokument. - + The transparency of this object Prozornost tega predmeta - + The color of this object Barva tega predmeta - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Razdalja med rezalno ravnino in ravnino vidnega polja (razdalja naj bo majhna, vendar ne nič) @@ -1989,7 +1989,7 @@ Določa ali naj se smer strehe obrne - + Show the label in the 3D view Prikaži oznako v 3D pogledu @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length Če ni ničla, osi ne bodo prikazane s polno črto temveč kot dve črti z določeno dolžino + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Kot - + is not closed ni sklenjen - + is not valid ni veljaven - + doesn't contain any solid ne vsebuje telesa - + contains a non-closed solid vsebuje nezaprto telo - + contains faces that are not part of any solid vsebuje ploskve, ki niso del nobenega telesa - + Grouping Združevanje - + Ungrouping Razdruževanje - + Split Mesh Razcepi ploskovje - + Mesh to Shape Mreža v obliko @@ -2267,12 +2272,12 @@ datoteka %s uspešno ustvarjena. - + Add space boundary Dodaj prostorsko omejitev - + Remove space boundary Odstrani prostorsko omejitev @@ -2357,17 +2362,17 @@ Ustvari konstrukcijski sistem - + Object doesn't have settable IFC Attributes Predmet nima nastavljivih značilk IFC - + Disabling Brep force flag of object Izklopi vsiljeno predstavitev objekta z ovojnico - + Enabling Brep force flag of object Omogočanje vsiljene zastavice predstavitve objekta z ovojnico @@ -2487,7 +2492,7 @@ Višina (mm) - + Create Component Ustvari komponento @@ -2512,22 +2517,22 @@ Kategorija - + Key Ključ - + Value Vrednost - + Unit Enota - + Create IFC properties spreadsheet Ustvari preglednico lastnosti IFC @@ -2727,7 +2732,7 @@ Uvozi datoteko CSV - + Export CSV File Izvozi datoteko CSV @@ -2949,47 +2954,47 @@ Deli oken - + Survey Popis - + Set description Določi opis - + Clear Počisti - + Copy Length Kopiraj dolžino - + Copy Area Kopiraj površino - + Export CSV Izvozi CSV - + Description Opis - + Area Površina - + Total Skupaj @@ -3039,17 +3044,17 @@ Ustvari Stavbni Del - + Invalid cutplane Neveljavna rezalna ravnina - + All good! No problems found Vse v redu! Ni zaznanih težav - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Predmet nima značilke IfcProperties. Prekliči ustvarjanje preglednice za predmet: @@ -3204,37 +3209,37 @@ Ustvari zunanji sklic - + Section plane settings Nastavitve prerezne ravnine - + Objects seen by this section plane: Predmeti, vidni v prerezni ravnini: - + Section plane placement: Umestitev prerezne ravnine: - + Rotate X Zavrti X - + Rotate Y Zavrti Y - + Rotate Z Zavrti Z - + Resize Spremeni velikost @@ -3369,42 +3374,42 @@ Uspešno uvožen - + Remove highlighted objects from the list above Odstrani označene predmete z zgornjega seznama - + Add selected Dodaj izbrane - + Add selected object(s) to the scope of this section plane Dodaj izbrene predmete v območje te presečne ravnine - + Rotates the plane along the X axis Zasuka ravnino okrog osi X - + Rotates the plane along the Y axis Zasuka ravnino okrog osi Y - + Rotates the plane along the Z axis Zasuka ravnino okrog osi Z - + Resizes the plane to fit the objects in the list above Prevelikosti ravnino tako, da se bo prilega predmetom z zgornjega seznama - + Centers the plane on the objects in the list above Usredini ravnino na predmete z zgornjega seznama @@ -3889,12 +3894,12 @@ Ustvarjanje etaže prekinjeno. Arch_Add - + Add component Dodaj sestavino - + Adds the selected components to the active object Doda izbrane sestavine v dejavni predmet @@ -3972,12 +3977,12 @@ Ustvarjanje etaže prekinjeno. Arch_Check - + Check Preveri - + Checks the selected objects for problems Preveri izbrane predmete za morebitne napake @@ -3985,12 +3990,12 @@ Ustvarjanje etaže prekinjeno. Arch_CloneComponent - + Clone component Podvoji sestavino - + Clones an object as an undefined architectural component Podvoji predmet kot neopredeljeno sestavino @@ -3998,12 +4003,12 @@ Ustvarjanje etaže prekinjeno. Arch_CloseHoles - + Close holes Zapri luknje - + Closes holes in open shapes, turning them solids Zapre luknje v odprtih oblikah in jih pretvori v telesa @@ -4011,12 +4016,12 @@ Ustvarjanje etaže prekinjeno. Arch_Component - + Component Sestavina - + Creates an undefined architectural component Ustvari neopredeljeno arhitekturno sestavino @@ -4175,12 +4180,12 @@ Ustvarjanje etaže prekinjeno. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Ustvari preglednico IFC … - + Creates a spreadsheet to store IFC properties of an object. Ustvari preglednico za shranjevanje lastnosti IFC predmeta. @@ -4222,12 +4227,12 @@ Ustvarjanje etaže prekinjeno. Arch_MeshToShape - + Mesh to Shape Mreža v obliko - + Turns selected meshes into Part Shape objects Pretvori izbrana črtovja v oblike dela @@ -4394,12 +4399,12 @@ Ustvarjanje etaže prekinjeno. Arch_Remove - + Remove component Odstrani sestavino - + Remove the selected components from their parents, or create a hole in a component Odstrani izbrane sestavine iz nadrejenih ali ustvari luknjo v sestavini @@ -4407,12 +4412,12 @@ Ustvarjanje etaže prekinjeno. Arch_RemoveShape - + Remove Shape from Arch Odstrani obliko iz arhitekture - + Removes cubic shapes from Arch components Odstrani prostorninske oblike iz arhitekturnih sestavin @@ -4459,12 +4464,12 @@ Ustvarjanje etaže prekinjeno. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Izberi nemnogoterne mreže - + Selects all non-manifold meshes from the document or from the selected groups Izbere vse nemnogoterne mreže v dokumentu ali izbranih skupinah @@ -4503,12 +4508,12 @@ Ustvarjanje etaže prekinjeno. Arch_SplitMesh - + Split Mesh Razcepi ploskovje - + Splits selected meshes into independent components Razcepi izbrana ploskovja v neodvisne sestavine @@ -4537,12 +4542,12 @@ Ustvarjanje etaže prekinjeno. Arch_Survey - + Survey Popis - + Starts survey Začne s popisovanjem @@ -4550,12 +4555,12 @@ Ustvarjanje etaže prekinjeno. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Preklopi zastavico pred. z ovojnico IFC - + Force an object to be exported as Brep or not Vsili izvoz predmeta kot predstavitev z ovojnico ali ne @@ -4563,12 +4568,12 @@ Ustvarjanje etaže prekinjeno. Arch_ToggleSubs - + Toggle subcomponents Predklapljanje podsestavin - + Shows or hides the subcomponents of this object Razkrije ali skrije podsestavine tega predmeta diff --git a/src/Mod/Arch/Resources/translations/Arch_sr.qm b/src/Mod/Arch/Resources/translations/Arch_sr.qm index a76f8d03b4..b743ade948 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sr.qm and b/src/Mod/Arch/Resources/translations/Arch_sr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sr.ts b/src/Mod/Arch/Resources/translations/Arch_sr.ts index ee56ee8f8a..72d59592b7 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sr.ts @@ -574,47 +574,47 @@ If false, non-solids will be cut too, with possible wrong results. - + The display length of this section plane The display length of this section plane - + The display height of this section plane The display height of this section plane - + The size of the arrows of this section plane The size of the arrows of this section plane - + Show the cut in the 3D view Show the cut in the 3D view - + The rendering mode to use The rendering mode to use - + If cut geometry is shown or not If cut geometry is shown or not - + If cut geometry is filled or not If cut geometry is filled or not - + The size of the texts inside this object The size of the texts inside this object - + If checked, source objects are displayed regardless of being visible in the 3D model If checked, source objects are displayed regardless of being visible in the 3D model @@ -769,7 +769,7 @@ The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - + The name of the font The name of the font @@ -779,7 +779,7 @@ The color of the area text - + The size of the text font The size of the text font @@ -1039,12 +1039,12 @@ The list of layer thicknesses - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) The color of the cut faces (if turned on) @@ -1219,7 +1219,7 @@ The shape of this object - + The line width of this object The line width of this object @@ -1349,17 +1349,17 @@ The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Show the label in the 3D view @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Угао - + is not closed није затворен - + is not valid није важећи - + doesn't contain any solid не садржи ниједно чврсто тело - + contains a non-closed solid Садржи отворено круто тело - + contains faces that are not part of any solid садржи површине које нису део ниједног тела - + Grouping Груписање - + Ungrouping Разгруписавање - + Split Mesh Split Mesh - + Mesh to Shape Mesh to Shape @@ -2267,12 +2272,12 @@ %s датотека је успешно креирана. - + Add space boundary Dodaj granice prostora - + Remove space boundary Ukloni granice prostora @@ -2357,17 +2362,17 @@ Направи Cтруктурни Cиcтем - + Object doesn't have settable IFC Attributes Object doesn't have settable IFC Attributes - + Disabling Brep force flag of object Disabling Brep force flag of object - + Enabling Brep force flag of object Enabling Brep force flag of object @@ -2488,7 +2493,7 @@ Виcина (mm) - + Create Component Create Component @@ -2513,22 +2518,22 @@ Категорија - + Key кључ - + Value Вредност - + Unit Јединица - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2728,7 +2733,7 @@ Import CSV File - + Export CSV File Export CSV File @@ -2950,47 +2955,47 @@ Window elements - + Survey Survey - + Set description Set description - + Clear Обриши - + Copy Length Copy Length - + Copy Area Copy Area - + Export CSV Export CSV - + Description Опис - + Area Area - + Total Total @@ -3040,17 +3045,17 @@ Create BuildingPart - + Invalid cutplane Invalid cutplane - + All good! No problems found All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -3205,37 +3210,37 @@ Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3370,42 +3375,42 @@ Successfully imported - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3892,12 +3897,12 @@ Floor creation aborted. Arch_Add - + Add component Додај компоненту - + Adds the selected components to the active object Додаје одабране компоненте активном објекту @@ -3975,12 +3980,12 @@ Floor creation aborted. Arch_Check - + Check Провери - + Checks the selected objects for problems Проверава да ли има проблема на одабраним објектима @@ -3988,12 +3993,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Clones an object as an undefined architectural component @@ -4001,12 +4006,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes Затвори рупе - + Closes holes in open shapes, turning them solids Затвара рупе у отвореним објектима,претварајући их у чврcта тела @@ -4014,12 +4019,12 @@ Floor creation aborted. Arch_Component - + Component Компонента - + Creates an undefined architectural component Прави недефиниcану архитектонcку компоненту @@ -4178,12 +4183,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Create IFC spreadsheet... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -4225,12 +4230,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape Mesh to Shape - + Turns selected meshes into Part Shape objects Turns selected meshes into Part Shape objects @@ -4397,12 +4402,12 @@ Floor creation aborted. Arch_Remove - + Remove component Уклони компоненту - + Remove the selected components from their parents, or create a hole in a component Remove the selected components from their parents, or create a hole in a component @@ -4410,12 +4415,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Remove Shape from Arch - + Removes cubic shapes from Arch components Removes cubic shapes from Arch components @@ -4462,12 +4467,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Select non-manifold meshes - + Selects all non-manifold meshes from the document or from the selected groups Selects all non-manifold meshes from the document or from the selected groups @@ -4506,12 +4511,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh Split Mesh - + Splits selected meshes into independent components Splits selected meshes into independent components @@ -4540,12 +4545,12 @@ Floor creation aborted. Arch_Survey - + Survey Survey - + Starts survey Starts survey @@ -4553,12 +4558,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Toggle IFC Brep flag - + Force an object to be exported as Brep or not Force an object to be exported as Brep or not @@ -4566,12 +4571,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object diff --git a/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm b/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm index 8543e96e11..cdd5da03fc 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm and b/src/Mod/Arch/Resources/translations/Arch_sv-SE.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts b/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts index 2dcdee061e..e56a56ed86 100644 --- a/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts +++ b/src/Mod/Arch/Resources/translations/Arch_sv-SE.ts @@ -574,47 +574,47 @@ Om detta är falskt kommer icke-solider att trimmas också, med möjligen felaktigt resultat. - + The display length of this section plane Visningslängden för detta snittplan - + The display height of this section plane Visningshöjden för detta snittplan - + The size of the arrows of this section plane Storleken på pilarna för detta snittplan - + Show the cut in the 3D view Visa trimningen i 3D-vyn - + The rendering mode to use Renderingsläget att använda - + If cut geometry is shown or not Om trimmad geometri ska visas eller inte - + If cut geometry is filled or not Om trimmad geometri ska vara fylld eller inte - + The size of the texts inside this object Storleken på texterna inuti detta objekt - + If checked, source objects are displayed regardless of being visible in the 3D model Om detta är ikryssat kommer källobjekt visas oavsett synlighet i 3D-modellen @@ -769,7 +769,7 @@ Texten att visa. Använd $area, $label, $tag, $floor, $walls, $ceiling för att infoga respektive data - + The name of the font Namnet på teckensnittet @@ -779,7 +779,7 @@ Färgen på områdestexten - + The size of the text font Storleken på teckensnittet @@ -1039,12 +1039,12 @@ Listan över lagertjocklekar - + The line color of the projected objects Linjefärgen för de projicerade objekten - + The color of the cut faces (if turned on) Färgen på de trimmade ytorna (om aktiverat) @@ -1219,7 +1219,7 @@ Formen på detta objekt - + The line width of this object Linjetjockleken för detta objekt @@ -1349,17 +1349,17 @@ De objekt som måste beaktas av detta snittplan. Tomt innebär hela dokumentet. - + The transparency of this object Transparensen för detta objekt - + The color of this object Färgen på detta objekt - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Avståndet mellan det snittet och den faktiska vyn av snittet (håll detta värde litet men inte noll) @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Visa etiketten i 3D-vyn @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Vinkel - + is not closed är inte stängd - + is not valid är inte giltig - + doesn't contain any solid innehåller inte någon solid - + contains a non-closed solid Innehåller en osluten solid - + contains faces that are not part of any solid Innehåller ytor som inte är en del av någon solid - + Grouping Gruppering - + Ungrouping Dela upp - + Split Mesh Splitta nät - + Mesh to Shape Nät till form @@ -2267,12 +2272,12 @@ filen %s har skapats. - + Add space boundary Lägg till utrymmesgräns - + Remove space boundary Ta bort utrymmesgräns @@ -2357,17 +2362,17 @@ Skapa strukturellt system - + Object doesn't have settable IFC Attributes Objektet har inte inställbara IFC-attribut - + Disabling Brep force flag of object Inaktiverar Brep-tvångsflagga för objekt - + Enabling Brep force flag of object Aktiverar Brep-tvångsflagga för objekt @@ -2487,7 +2492,7 @@ Höjd (mm) - + Create Component Skapa komponent @@ -2512,22 +2517,22 @@ Kategori - + Key Nyckel - + Value Värde - + Unit Enhet - + Create IFC properties spreadsheet Skapa kalkylark med IFC-egenskaper @@ -2727,7 +2732,7 @@ Importera CSV-fil - + Export CSV File Exportera CSV-fil @@ -2949,47 +2954,47 @@ Fönsterelement - + Survey Enkät - + Set description Ange beskrivning - + Clear Rensa - + Copy Length Kopiera längd - + Copy Area Kopiera area - + Export CSV Exportera CSV - + Description Beskrivning - + Area Area - + Total Totalt @@ -3039,17 +3044,17 @@ Skapa byggnadsdel - + Invalid cutplane Ogiltigt snittplan - + All good! No problems found Allt bra! inga problem hittades - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Objektet har inte ett IfcProperties attribut. Avbryt skapandet av kalkylblad för objekt: @@ -3204,37 +3209,37 @@ Skapa extern referens - + Section plane settings Inställningar för sektionsplan - + Objects seen by this section plane: Objekt sedda av detta sektionsplan: - + Section plane placement: Section plane placement: - + Rotate X Rotera X - + Rotate Y Rotera Y - + Rotate Z Rotera Z - + Resize Ändra storlek @@ -3369,42 +3374,42 @@ Importen lyckades - + Remove highlighted objects from the list above Ta bort markerade objekt från listan ovan - + Add selected Lägg till markerad - + Add selected object(s) to the scope of this section plane Lägg till valda objekt till omfattningen av detta sektionsplan - + Rotates the plane along the X axis Roterar planet längs X-axeln - + Rotates the plane along the Y axis Roterar planet längs Y-axeln - + Rotates the plane along the Z axis Roterar planet längs Z-axeln - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centrerar planet på objekten i listan ovan @@ -3885,12 +3890,12 @@ Skapande av golv avbruten. Arch_Add - + Add component Lägg till komponent - + Adds the selected components to the active object Lägger till de valda komponenterna till det aktiva objektet @@ -3968,12 +3973,12 @@ Skapande av golv avbruten. Arch_Check - + Check Kontrollera - + Checks the selected objects for problems Kontrollerar de markerade objekten efter problem @@ -3981,12 +3986,12 @@ Skapande av golv avbruten. Arch_CloneComponent - + Clone component Klona komponent - + Clones an object as an undefined architectural component Klonar ett objekt som en odefinierad arkitekturkomponent @@ -3994,12 +3999,12 @@ Skapande av golv avbruten. Arch_CloseHoles - + Close holes Stäng hål - + Closes holes in open shapes, turning them solids Stänger hål i öppna former, och omvandlar dem dem till solider @@ -4007,12 +4012,12 @@ Skapande av golv avbruten. Arch_Component - + Component Komponent - + Creates an undefined architectural component Skapar en odefinierad arkitekturkomponent @@ -4171,12 +4176,12 @@ Skapande av golv avbruten. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Skapa IFC kalkylark... - + Creates a spreadsheet to store IFC properties of an object. Skapar ett kalkylblad för att lagra IFC-egenskaper hos ett objekt. @@ -4218,12 +4223,12 @@ Skapande av golv avbruten. Arch_MeshToShape - + Mesh to Shape Nät till form - + Turns selected meshes into Part Shape objects Omvandlar valda nät till del form-objekt @@ -4390,12 +4395,12 @@ Skapande av golv avbruten. Arch_Remove - + Remove component Ta bort komponent - + Remove the selected components from their parents, or create a hole in a component Ta bort de valda komponenterna från deras föräldrar, eller skapa ett hål i en komponent @@ -4403,12 +4408,12 @@ Skapande av golv avbruten. Arch_RemoveShape - + Remove Shape from Arch Ta bort form från Arch - + Removes cubic shapes from Arch components Tar bort kubiska former från Arch komponenter @@ -4455,12 +4460,12 @@ Skapande av golv avbruten. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Välj icke-manifold nät - + Selects all non-manifold meshes from the document or from the selected groups Väljer alla icke-manifold nät från dokumentet eller från de valda grupperna @@ -4499,12 +4504,12 @@ Skapande av golv avbruten. Arch_SplitMesh - + Split Mesh Splitta nät - + Splits selected meshes into independent components Delar valda nät i självständiga komponenter @@ -4533,12 +4538,12 @@ Skapande av golv avbruten. Arch_Survey - + Survey Enkät - + Starts survey Påbörjar enkät @@ -4546,12 +4551,12 @@ Skapande av golv avbruten. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Växla IFC-BREP-flagga - + Force an object to be exported as Brep or not Tvinga ett objekt att exporteras som BREP @@ -4559,12 +4564,12 @@ Skapande av golv avbruten. Arch_ToggleSubs - + Toggle subcomponents Växla underkomponenter - + Shows or hides the subcomponents of this object Visar eller döljer underkomponenterna för detta objekt diff --git a/src/Mod/Arch/Resources/translations/Arch_tr.qm b/src/Mod/Arch/Resources/translations/Arch_tr.qm index 518022bb2f..961f7ab986 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_tr.qm and b/src/Mod/Arch/Resources/translations/Arch_tr.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_tr.ts b/src/Mod/Arch/Resources/translations/Arch_tr.ts index 96be61b420..eff831f862 100644 --- a/src/Mod/Arch/Resources/translations/Arch_tr.ts +++ b/src/Mod/Arch/Resources/translations/Arch_tr.ts @@ -574,47 +574,47 @@ Yanlış'sa, katı olmayan olası yanlış sonuçlar ile de kesecek. - + The display length of this section plane Kesit düzlemin ekran boyutu - + The display height of this section plane Kesit düzlemin ekran boyutu - + The size of the arrows of this section plane Bu kesit düzleminin oklarının boyutu - + Show the cut in the 3D view Kesmeyi 3D görünümde gösterin - + The rendering mode to use Kullanılacak işleme modu - + If cut geometry is shown or not Kesme geometrisi gösterilse veya gösterilmezse - + If cut geometry is filled or not Kesim geometrisi doldurulmuş veya doldurulmamışsa - + The size of the texts inside this object Bu nesnenin içindeki metinlerin boyutu - + If checked, source objects are displayed regardless of being visible in the 3D model İşaretlenirse, görünür olmasına bakılmaksızın kaynak nesneler 3D modelde görüntülenir @@ -769,7 +769,7 @@ Göstermek için metin. $area, $label, $tag, $floor, $walls, $ceiling ilgili veri eklemek için kullanın - + The name of the font Yazı tipinin adını @@ -779,7 +779,7 @@ Etiket yazısının rengi - + The size of the text font Etiket yazısının boyutu @@ -1039,12 +1039,12 @@ Katman kalınlıklarının listesi - + The line color of the projected objects Yansıtılan nesnelerin rengi - + The color of the cut faces (if turned on) Kesme renk (açık değilse) karşı karşıya @@ -1219,7 +1219,7 @@ Bu nesnenin şekli - + The line width of this object Bu nesnenin çizgi genişliği @@ -1349,17 +1349,17 @@ Bu seçim düzlemi tarafından dikkate alınması gereken nesneler. Boş, tüm belgeyi ifade eder. - + The transparency of this object Bu nesnenin saydamlığı - + The color of this object Bu nesnenin rengi - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Kesim düzlemiyle gerçek kesim arasındaki uzaklık (bu değeri sıfır olmayan çok küçük değerde tutun) @@ -1989,7 +1989,7 @@ Çatının yönünün çevrilip çevrilmeyeceğini belirtir - + Show the label in the 3D view Etiketi 3B görünümde göster @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Açı - + is not closed Kapalı değil - + is not valid geçerli değil - + doesn't contain any solid herhangi bir katı içermiyor - + contains a non-closed solid kapalı olmayan bir katı madde içerir - + contains faces that are not part of any solid herhangi bir katının parçası olmayan yüzleri içerir - + Grouping Gruplandırma - + Ungrouping Grubu çözme - + Split Mesh Parçacıkları ayır - + Mesh to Shape Parçacıklardan şekle @@ -2267,12 +2272,12 @@ %s dosyası başarıyla oluşturuldu. - + Add space boundary Boşluk sınırı ekleme - + Remove space boundary Boşluk sınırını kaldırma @@ -2357,17 +2362,17 @@ Yapısal sistemi oluşturmak - + Object doesn't have settable IFC Attributes Nesne ayarlanabilir IFC öznitelikleri yok - + Disabling Brep force flag of object Brep kuvvet bayrak nesnesinin devre dışı bırakma - + Enabling Brep force flag of object Brep kuvvet bayrak nesnesinin devre dışı bırakma @@ -2487,7 +2492,7 @@ Yükseklik (mm) - + Create Component Bileşen oluştur @@ -2512,22 +2517,22 @@ Kategori - + Key Anahtar - + Value Değer - + Unit Birim - + Create IFC properties spreadsheet IFC özellikleri hesap tablosu oluştur @@ -2727,7 +2732,7 @@ CSV dosya içe aktar - + Export CSV File CSV Dosyasını Dışarı Aktar @@ -2949,47 +2954,47 @@ Pencere öğeleri - + Survey Anket - + Set description Açıklama ayarla - + Clear Temizle - + Copy Length Uzunluğu kopyala - + Copy Area Kopyalama alanı - + Export CSV CSV olarak dışa aktar - + Description Açıklama - + Area Alan - + Total Toplam @@ -3039,17 +3044,17 @@ YapıParçası Oluşturuluyor - + Invalid cutplane Geçersiz kesme düzlemi - + All good! No problems found Her şey yolunda! hiçbir sorun bulunamadı - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Nesnede bir IfcProperties özelliği yoktur. E-tablo oluşturmak için iptal edilecek Nesne: @@ -3204,37 +3209,37 @@ Harici referans oluştur - + Section plane settings Seçim düzlemi ayarları - + Objects seen by this section plane: Bu seçim düzlemi tarafından görülen nesneler: - + Section plane placement: Seçim düzlemi yerleşimi: - + Rotate X Döndür X - + Rotate Y Döndür Y - + Rotate Z Döndür Z - + Resize Yeniden boyutlandır @@ -3369,42 +3374,42 @@ Başarıyla içeri aktarıldı - + Remove highlighted objects from the list above Yukarıdaki listede yer alan vurgulanmış nesneleri kaldır - + Add selected Seçileni ekle - + Add selected object(s) to the scope of this section plane Seçili nesne(leri) bu bölüm düzleminin kapsamına ekle - + Rotates the plane along the X axis Düzlemi X ekseni boyunca döndür - + Rotates the plane along the Y axis Düzlemi Y ekseni boyunca döndür - + Rotates the plane along the Z axis Düzlemi Z ekseni boyunca döndür - + Resizes the plane to fit the objects in the list above Yukarıdaki listede yer alan nesneleri düzlem üzerinde yeniden boyutlandır - + Centers the plane on the objects in the list above Yukarıdaki listede yer alan nesneleri düzlem üzerinde merkezle @@ -3891,12 +3896,12 @@ Zemin oluşturma iptal edildi. Arch_Add - + Add component Parça ekle - + Adds the selected components to the active object Seçili bileşenleri etkin nesneye ekle @@ -3974,12 +3979,12 @@ Zemin oluşturma iptal edildi. Arch_Check - + Check Kontrol Et - + Checks the selected objects for problems Seçili nesneler için sorunları denetler @@ -3987,12 +3992,12 @@ Zemin oluşturma iptal edildi. Arch_CloneComponent - + Clone component Temel bileşen - + Clones an object as an undefined architectural component Bir nesne tanımlanmamış bir mimari bileşeni klonlar @@ -4000,12 +4005,12 @@ Zemin oluşturma iptal edildi. Arch_CloseHoles - + Close holes Yakın delik - + Closes holes in open shapes, turning them solids Açık şekiller, onları katı dönüm delikleri kapatır @@ -4013,12 +4018,12 @@ Zemin oluşturma iptal edildi. Arch_Component - + Component Bileşen - + Creates an undefined architectural component Bir nesne tanımlanmamış bir mimari bileşeni klonlar @@ -4177,12 +4182,12 @@ Zemin oluşturma iptal edildi. Arch_IfcSpreadsheet - + Create IFC spreadsheet... IFC hesap tablosu oluştur... - + Creates a spreadsheet to store IFC properties of an object. Bir nesnenin IFC özelliklerini depolamak için bir hesap tablosu oluşturur. @@ -4224,12 +4229,12 @@ Zemin oluşturma iptal edildi. Arch_MeshToShape - + Mesh to Shape Parçacıklardan şekle - + Turns selected meshes into Part Shape objects Döner seçilen kafesler içine bölümü şekil nesneleri @@ -4396,12 +4401,12 @@ Zemin oluşturma iptal edildi. Arch_Remove - + Remove component Bileşeni kaldır - + Remove the selected components from their parents, or create a hole in a component Seçili bileşenleri bağlı oldukları ana bileşenlerden ayır, veya bileşen içinde bir delik oluştur @@ -4409,12 +4414,12 @@ Zemin oluşturma iptal edildi. Arch_RemoveShape - + Remove Shape from Arch Arktan şekilleri çıkarır - + Removes cubic shapes from Arch components Ark parçalarından kübik şekilleri çıkarır @@ -4461,12 +4466,12 @@ Zemin oluşturma iptal edildi. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Dallanmamış kafesleri seç - + Selects all non-manifold meshes from the document or from the selected groups Belgeden veya seçili grup içerisinden dallanmamış kafeslerin tamamını seçer @@ -4505,12 +4510,12 @@ Zemin oluşturma iptal edildi. Arch_SplitMesh - + Split Mesh Parçacıkları ayır - + Splits selected meshes into independent components Seçili parçacıkları bağımsız bileşenlere ayır @@ -4539,12 +4544,12 @@ Zemin oluşturma iptal edildi. Arch_Survey - + Survey Anket - + Starts survey Başlar anket @@ -4552,12 +4557,12 @@ Zemin oluşturma iptal edildi. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag İki durumlu IFC Brep bayrak - + Force an object to be exported as Brep or not Bir nesne ya da Brep verilecek zorlamak @@ -4565,12 +4570,12 @@ Zemin oluşturma iptal edildi. Arch_ToggleSubs - + Toggle subcomponents İki durumlu alt bileşenleri - + Shows or hides the subcomponents of this object Gösterir veya gizler, bu nesnenin alt bileşenleri diff --git a/src/Mod/Arch/Resources/translations/Arch_uk.qm b/src/Mod/Arch/Resources/translations/Arch_uk.qm index 9440701da2..d5118047e0 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_uk.qm and b/src/Mod/Arch/Resources/translations/Arch_uk.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_uk.ts b/src/Mod/Arch/Resources/translations/Arch_uk.ts index 13285b276a..b83febc64a 100644 --- a/src/Mod/Arch/Resources/translations/Arch_uk.ts +++ b/src/Mod/Arch/Resources/translations/Arch_uk.ts @@ -574,47 +574,47 @@ Якщо хибне, несуцільні також будуть вирізані, з можливими хибними результатами. - + The display length of this section plane Довжина відображення цієї площини перерізу - + The display height of this section plane Висота відображення цієї площини перерізу - + The size of the arrows of this section plane Розмір стрілок цієї площини перерізу - + Show the cut in the 3D view Показати розріз в 3D перегляді - + The rendering mode to use Використовувати режим рендерингу - + If cut geometry is shown or not Показувати чи ні обрізану геометрію - + If cut geometry is filled or not Якщо розріз геометрії заповнен чи ні - + The size of the texts inside this object Розмір тексту всередині цього об'єкта - + If checked, source objects are displayed regardless of being visible in the 3D model Якщо відмічено, то вихідні об'єкти відображаються, незалежно від того, чи вони видимі в 3D моделі @@ -769,7 +769,7 @@ Текст для відображення. Використовуйте $area, $label, $tag, $floor, $walls, $ceiling, щоб вставити відповідні дані - + The name of the font Назва шрифту @@ -779,7 +779,7 @@ Колір області тексту - + The size of the text font Розмір шрифту тексту @@ -1039,12 +1039,12 @@ Перелік товщин шарів - + The line color of the projected objects Колір ліній проектованих об'єктів - + The color of the cut faces (if turned on) Колір обрізаних граней (якщо увімкнено) @@ -1219,7 +1219,7 @@ Форма цього об'єкта - + The line width of this object Товщина лінії цього об'єкту @@ -1349,17 +1349,17 @@ Об'єкти, які необхідно враховувати за допомогою цієї площини перерізу. Порожній означає весь документ. - + The transparency of this object Прозорість цього об'єкта - + The color of this object Колір цього об'єкта - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Відстань між розрізом площини та фактичним вирізом (має дуже маленьке значення, але не нуль) @@ -1989,7 +1989,7 @@ Визначає, чи напрям покрівлі треба повернути - + Show the label in the 3D view Показати позначки в 3D-вигляді @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length Якщо не нуль, осі будуть позначені не в вигляді одного повного рядка, а у вигляді двох рядків заданої довжини + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Кут - + is not closed не замкнений - + is not valid неприпустимо - + doesn't contain any solid не містить жодного суцільного тіла - + contains a non-closed solid містить незамкнене суцільне тіло - + contains faces that are not part of any solid містить поверхні, які не належать жодному суцільному тілу - + Grouping Групування - + Ungrouping Розгрупування - + Split Mesh Розділити меш - + Mesh to Shape Меш у форму @@ -2267,12 +2272,12 @@ файл %s створений успішно. - + Add space boundary Додати відступ - + Remove space boundary Прибрати відступ @@ -2357,17 +2362,17 @@ Створити Структурну систему - + Object doesn't have settable IFC Attributes Об'єкт не має настроюваних IFC-параметрів - + Disabling Brep force flag of object Вимкнення прапорцю Brep-форсування - + Enabling Brep force flag of object Ввімкнення прапорцю Brep-форсування @@ -2487,7 +2492,7 @@ Висота (мм) - + Create Component Створити компонент @@ -2512,22 +2517,22 @@ Категорія - + Key Ключ - + Value Значення - + Unit Одиниця - + Create IFC properties spreadsheet Створити таблицю властивостей IFC @@ -2727,7 +2732,7 @@ Імпортувати файл CSV - + Export CSV File Експортувати .CSV файл @@ -2949,47 +2954,47 @@ Елементи вікна - + Survey Перегляд - + Set description Додати опис - + Clear Очистити - + Copy Length Копіювати довжину - + Copy Area Копіювати область - + Export CSV Експорт CSV - + Description Опис - + Area Площа - + Total Всього @@ -3039,17 +3044,17 @@ Створити Будівельну частину - + Invalid cutplane Неправильна сітка перетину - + All good! No problems found Все добре! Проблем не виявлено - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Об'єкт не має атрибуту IfcProperties . Скасувати створення таблиці для об'єкта: @@ -3204,37 +3209,37 @@ Створити зовнішнє посилання - + Section plane settings Налаштування площини перетину - + Objects seen by this section plane: Видимі об'єкти на площині перетину: - + Section plane placement: Розміщення площини перетину: - + Rotate X Повернути по осі Х - + Rotate Y Повернути по осі Y - + Rotate Z Повернути по осі Z - + Resize Змінити розмір @@ -3369,42 +3374,42 @@ Імпорт завершено успішно - + Remove highlighted objects from the list above Видаліть виділені об'єкти зі списку вище - + Add selected Додати вибрані - + Add selected object(s) to the scope of this section plane Додати вибраний об'єкт(и) до діапазону цієї площини перерізу - + Rotates the plane along the X axis Обертає площину вздовж осі X - + Rotates the plane along the Y axis Обертає площину вздовж осі Y - + Rotates the plane along the Z axis Обертає площину вздовж осі Z - + Resizes the plane to fit the objects in the list above Змінює розмір площини відповідно до об’єктів у списку вище - + Centers the plane on the objects in the list above Центрує площину на об’єктах у списку вище @@ -3892,12 +3897,12 @@ Floor creation aborted. Arch_Add - + Add component Додати компонент - + Adds the selected components to the active object Додає обраний компонент до активного об’єкту @@ -3975,12 +3980,12 @@ Floor creation aborted. Arch_Check - + Check Перевірити - + Checks the selected objects for problems Перевірити виділені об'єкти на наявність проблем @@ -3988,12 +3993,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component Скопіювати компонент - + Clones an object as an undefined architectural component Клонує об'єкт як невизначений архітектурний компонент @@ -4001,12 +4006,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes Закрити отвори - + Closes holes in open shapes, turning them solids Закриває отвори у відкритих формах, перетворюючи їх на суцільні тіла @@ -4014,12 +4019,12 @@ Floor creation aborted. Arch_Component - + Component Компонент - + Creates an undefined architectural component Створює невизначений архітектурний компонент @@ -4178,12 +4183,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Створити таблицю IFC ... - + Creates a spreadsheet to store IFC properties of an object. Створює таблицю для зберігання властивостей IFC об'єкта. @@ -4225,12 +4230,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape Меш у форму - + Turns selected meshes into Part Shape objects Перетворює вибрані полігональні сітки у об'єкти фігур @@ -4397,12 +4402,12 @@ Floor creation aborted. Arch_Remove - + Remove component Видалити компонент - + Remove the selected components from their parents, or create a hole in a component Видалення обраних компонентів від своїх батьків, або створити отвір в компоненті @@ -4410,12 +4415,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Видалити фігуру з Arch - + Removes cubic shapes from Arch components Видаляє з компонентів Arch кубічні фігури @@ -4462,12 +4467,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Обрати немноговидні сітки - + Selects all non-manifold meshes from the document or from the selected groups Виділяє всі немноговидні сітки з документу або обраних груп @@ -4506,12 +4511,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh Розділити меш - + Splits selected meshes into independent components Розбиває меш на незалежні компоненти @@ -4540,12 +4545,12 @@ Floor creation aborted. Arch_Survey - + Survey Перегляд - + Starts survey Почати перегляд @@ -4553,12 +4558,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Перемикач перемикання прапорців IFC - + Force an object to be exported as Brep or not Примусово експортувати об'єкт як Brep чи ні @@ -4566,12 +4571,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents Перемкнути підкомпоненти - + Shows or hides the subcomponents of this object Показує або приховує підкомпоненти цього об’єкта @@ -5839,106 +5844,106 @@ Leave blank to use all objects from the document This is the SVG stroke-dasharray property to apply to projections of hidden objects. - This is the SVG stroke-dasharray property to apply -to projections of hidden objects. + Це властивість SVG штрихпунктирних ліній щоб застосувати +до проекцій прихованих об'єктів. Scaling factor for patterns used by object that have a Footprint display mode - Scaling factor for patterns used by object that have -a Footprint display mode + Масштабуючий коефіцієнт для шаблонів, що використовуються для об'єкту +в режимі режимі відображення відбиток The URL of a bim server instance (www.bimserver.org) to connect to. - The URL of a bim server instance (www.bimserver.org) to connect to. + URL-адреса бім серверу (www.bimserver.org) для підключення. If this is selected, the "Open BimServer in browser" button will open the Bim Server interface in an external browser instead of the FreeCAD web workbench - If this is selected, the "Open BimServer in browser" -button will open the Bim Server interface in an external browser -instead of the FreeCAD web workbench + Якщо обрано, кнопка "Відкрити BimServer в браузері" +відкриється інтерфейс Bim Server в зовнішньому браузері +замість веб-робочого середовища FreeCAD All dimensions in the file will be scaled with this factor - All dimensions in the file will be scaled with this factor + Всі розміри у файлі будуть масштабовані за допомогою цього коефіцієнта Meshing program that should be used. If using Netgen, make sure that it is available. - Meshing program that should be used. -If using Netgen, make sure that it is available. + Програму сітки потрібно використати. +Якщо використовується Netgen, переконайтеся, що вона доступна. Tessellation value to use with the Builtin and the Mefisto meshing program. - Tessellation value to use with the Builtin and the Mefisto meshing program. + Зазначені значення Тесселяції для використання в програмі Builtin та Mefisto meshing. Grading value to use for meshing using Netgen. This value describes how fast the mesh size decreases. The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. - Grading value to use for meshing using Netgen. -This value describes how fast the mesh size decreases. -The gradient of the local mesh size h(x) is bound by |Δh(x)| ≤ 1/value. + Класичне значення для сітки за допомогою Netgen. +Це значення описує наскільки швидко зменшиться розмір сітки. +Градієнт локальної сітки h(x) зв'язаний з |÷ h(x)| ≤ 1/value. Maximum number of segments per edge - Maximum number of segments per edge + Максимальна кількість сегментів за ребро Number of segments per radius - Number of segments per radius + Кількість сегментів на радіус Allow a second order mesh - Allow a second order mesh + Дозволити сітку другого замовлення Allow quadrilateral faces - Allow quadrilateral faces + Дозволити чотиристоронні поверхні IFC export - IFC export + Експорт у IFC Show this dialog when exporting - Show this dialog when exporting + Показувати це діалогове вікно при експорті Some IFC viewers don't like objects exported as extrusions. Use this to force all objects to be exported as BREP geometry. - Some IFC viewers don't like objects exported as extrusions. -Use this to force all objects to be exported as BREP geometry. + Деякі глядачі IFC не люблять експортовані як об'єкти із зовнішніми. +Використовуйте цю силу, щоб експортувати всі об'єкти як BREP геометрія. When exporting objects without unique ID (UID), the generated UID will be stored inside the FreeCAD object for reuse next time that object is exported. This leads to smaller differences between file versions. - When exporting objects without unique ID (UID), the generated UID -will be stored inside the FreeCAD object for reuse next time that object -is exported. This leads to smaller differences between file versions. + При експорті об'єктів без унікального ID (UID), згенерований UID +буде зберігатися в об'єкті FreeCAD для повторного використання наступного разу, коли об’єкт +експортується. Це призводить до меншої різниці між версіями файла. Store IFC unique ID in FreeCAD objects - Store IFC unique ID in FreeCAD objects + Зберігати унікальний ідентифікатор IFC у об'єктах FreeCAD @@ -5946,29 +5951,29 @@ is exported. This leads to smaller differences between file versions. - IFCOpenShell is a library that allows to import IFC files. -Its serializer functionality allows to give it an OCC shape and it will -produce adequate IFC geometry: NURBS, faceted, or anything else. -Note: The serializer is still an experimental feature! + IFCOpenShell - бібліотека, яка дозволяє імпортувати файли ISS. +Функціональність її серіалізатора дозволяє надати їй форму OCC і вона +створить адекватну геометрію IFC IFC : NURBS, грандіозну чи ще щось. +Примітка: Сервіалізатор все ще експериментальна функція! 2D objects will be exported as IfcAnnotation - 2D objects will be exported as IfcAnnotation + 2D об'єкти буде експортовано як IfcAnnotation All FreeCAD object properties will be stored inside the exported objects, allowing to recreate a full parametric model on reimport. - All FreeCAD object properties will be stored inside the exported objects, -allowing to recreate a full parametric model on reimport. + Всі властивості об’єктів FreeCAD будуть зберігатися в експортованих об’єктах, +дозволяючи відтворити повну параметричну модель під час імпорту. When possible, similar entities will be used only once in the file if possible. This can reduce the file size a lot, but will make it less easily readable. - When possible, similar entities will be used only once in the file if possible. -This can reduce the file size a lot, but will make it less easily readable. + Коли це можливо, подібні об'єкти будуть використані лише один раз у файлі, якщо це можливо. +Це може зменшити розмір файлу, але зробить його менш зручним. @@ -5976,10 +5981,10 @@ This can reduce the file size a lot, but will make it less easily readable. - When possible, IFC objects that are extruded rectangles will be -exported as IfcRectangleProfileDef. -However, some other applications might have problems importing that entity. -If this is your case, you can disable this and then all profiles will be exported as IfcArbitraryClosedProfileDef. + Коли це можливо, об’єкти IFC, виділені прямокутники +експортуватимуться як IfcRectangleProfileDef. +Однак, деякі інші програми можуть виникнути проблеми при імпорті цього об'єкту. +Якщо це ваш випадок, ви можете відключити це, а потім усі профілі будуть експортовані як IfcArbitraryClosedProfileDef. @@ -5987,157 +5992,157 @@ If this is your case, you can disable this and then all profiles will be exporte like IfcWallStandardCase or IfcBeamStandardCase. If this option is turned on, FreeCAD will automatically export such objects as standard cases when the necessary conditions are met. - Some IFC types such as IfcWall or IfcBeam have special standard versions -like IfcWallStandardCase or IfcBeamStandardCase. -If this option is turned on, FreeCAD will automatically export such objects -as standard cases when the necessary conditions are met. + Деякі типи IFC типу IfcWall або IfcBeam мають спеціальні стандартні версії +, такі як IfcWallStandardCase або IfcBeamStandardCase. +Якщо ця опція активована, FreeCAD буде автоматично експортувати такі об'єкти +як стандартні випадки при виконанні необхідних умов. If no site is found in the FreeCAD document, a default one will be added. A site is not mandatory but a common practice is to have at least one in the file. - If no site is found in the FreeCAD document, a default one will be added. -A site is not mandatory but a common practice is to have at least one in the file. + Якщо сайт не знайдено у документі FreeCAD, додаватиметься за замовчуванням. +Сайт не є обов'язковим, але загальна практика - мати принаймні один у файлі. Add default site if one is not found in the document - Add default site if one is not found in the document + Додати сайт за промовчанням, якщо він не знайдений в документі If no building is found in the FreeCAD document, a default one will be added. Warning: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. However, at FreeCAD, we believe having a building should not be mandatory, and this option is there to have a chance to demonstrate our point of view. - If no building is found in the FreeCAD document, a default one will be added. -Warning: The IFC standard asks for at least one building in each file. By turning this option off, you will produce a non-standard IFC file. -However, at FreeCAD, we believe having a building should not be mandatory, and this option is there to have a chance to demonstrate our point of view. + Якщо в документі FreeCAD не знайдено жодної будівлі, буде додано за замовчуванням. +Увага: стандарт IFC запитує принаймні одну будівлю в кожному файлі. Вимкнувши цю опцію, ви створите нестандартний файл IF. +Однак, за допомогою FreeCAD, ми вважаємо, що будівля не повинна бути обов'язковою, і ця опція для того, щоб показати нашу точку зору. Add default building if one is not found in the document (no standard) - Add default building if one is not found in the document (no standard) + Додати стандартну будівлю, якщо її не знайдено в документі (немає стандартного) If no building storey is found in the FreeCAD document, a default one will be added. A building storey is not mandatory but a common practice to have at least one in the file. - If no building storey is found in the FreeCAD document, a default one will be added. -A building storey is not mandatory but a common practice to have at least one in the file. + Якщо в документі FreeCAD не знайдено жодного будівельного поверху, буде додано такий за замовчуванням. +Будівельний поверх не є обов’язковою, але звичайною практикою є принаймні один у файлі. Add default building storey if one is not found in the document - Add default building storey if one is not found in the document + Додати типовий будівельний поверх, якщо його не знайдено в документі IFC file units - IFC file units + IFC величини файлу Metric - Metric + Метрична Imperial - Imperial + Англійська (Імперська) система IFC import - IFC import + Імпорт IFC Show this dialog when importing - Show this dialog when importing + Показувати цей діалог під час імпортування Shows verbose debug messages during import and export of IFC files in the Report view panel - Shows verbose debug messages during import and export -of IFC files in the Report view panel + Показує детальні повідомлення налагодження під час імпорту та експорту +файлів IFC в панелі перегляду Звіту Clones are used when objects have shared geometry One object is the base object, the others are clones. - Clones are used when objects have shared geometry -One object is the base object, the others are clones. + Клони використовуються, коли об'єкти мають спільну геометрію +Один об'єкт це базовий об'єкт, інші клони. Only subtypes of the specified element will be imported. Keep the element IfcProduct to import all building elements. - Only subtypes of the specified element will be imported. -Keep the element IfcProduct to import all building elements. + Імпортуються лише підтипи зазначеного елементу. +Тримайте елемент IfcProduct для імпорту всіх елементів будівлі. Openings will be imported as subtractions, otherwise wall shapes will already have their openings subtracted - Openings will be imported as subtractions, otherwise wall shapes -will already have their openings subtracted + Відкриття буде імпортовано як віднімання, в іншому випадку форми стін +вже будуть відняті частини The importer will try to detect extrusions. Note that this might slow things down. - The importer will try to detect extrusions. -Note that this might slow things down. + Імпорт буде намагатися виявити видавлювання. +Зверніть увагу, що це може уповільнити процес. Object names will be prefixed with the IFC ID number - Object names will be prefixed with the IFC ID number + Назви об'єктів будуть попередньо заповнені номером IFC ID If several materials with the same name and color are found in the IFC file, they will be treated as one. - If several materials with the same name and color are found in the IFC file, -they will be treated as one. + Якщо у файлі IФС знайдено кілька матеріалів з такою ж назвою і кольором, +до них ставиться як до одного. Merge materials with same name and same color - Merge materials with same name and same color + Об'єднати матеріали з таким ім'ям і тим самим кольором Each object will have their IFC properties stored in a spreadsheet object - Each object will have their IFC properties stored in a spreadsheet object + Кожен об'єкт матиме свої властивості IFC, які зберігатимуться в простому об'єкті Import IFC properties in spreadsheet - Import IFC properties in spreadsheet + Імпортувати властивості IFC в таблиці IFC files can contain unclean or non-solid geometry. If this option is checked, all the geometry is imported, regardless of their validity. - IFC files can contain unclean or non-solid geometry. If this option is checked, all the geometry is imported, regardless of their validity. + Файли IFC можуть містити нечисті або несуцільні геометрії. Якщо цей параметр позначено, вся геометрія імпортується незалежно від їх дійсності. Allow invalid shapes - Allow invalid shapes + Дозволити неприпустимі фігури Comma-separated list of IFC entities to be excluded from imports - Comma-separated list of IFC entities to be excluded from imports + Список товарів, через кому, які будуть виключені з імпорту Fit view during import on the imported objects. This will slow down the import, but one can watch the import. - Fit view during import on the imported objects. -This will slow down the import, but one can watch the import. + Пристосувати вигляд під час імпортування імпортованих об’єктів. +Це уповільнить імпорт, але за цим можна спостерігати. @@ -6171,9 +6176,9 @@ FreeCAD object properties Curved shapes that cannot be represented as curves in IFC are decomposed into flat facets. If this is checked, an additional calculation is done to join coplanar facets. - Curved shapes that cannot be represented as curves in IFC -are decomposed into flat facets. -If this is checked, an additional calculation is done to join coplanar facets. + Криві форми, позначені не можуть бути представлені у вигляді кривих у IFC +відокремлені у пласкі поверхні. +Якщо позначено цей пункт, додаткові розрахунки виконуються для приєднання до компланарів. @@ -6181,10 +6186,10 @@ If this is checked, an additional calculation is done to join coplanar facets. - The type of objects that you wish to export: -- Standard model: solid objects. -- Structural analysis: wireframe model for structural calculations. -- Standard + structural: both types of models. + Тип об’єктів, які ви хочете експортувати: +- Стандартна модель: твердотільні предмети. +- Структурний аналіз: каркасна модель для структурних розрахунків. +- Стандарт + конструкція: обидва типи моделей. @@ -6194,12 +6199,12 @@ Note that IFC files are ALWAYS written in metric units; imperial units are only a conversion factor applied on top of them. However, some BIM applications will use this factor to choose which unit to work with when opening the file. - The units you want your IFC file to be exported to. + Основні розділи, до яких ви хочете експортувати ваш ISS-файл. -Note that IFC files are ALWAYS written in metric units; imperial units -are only a conversion factor applied on top of them. -However, some BIM applications will use this factor to choose which -unit to work with when opening the file. +Зверніть увагу, що IFC файли є ALWAYS написані в метричних одиницях; імперські одиниці +є лише фактором конверсії, застосованою до них згори. Однак +Однак деякі програми BIM використовуватимуть цей фактор, щоб вибрати, з якого +підрозділу працювати при відкритті файлу. @@ -6211,19 +6216,19 @@ for example, 3 if you have a 4-core CPU. Set it to 1 to use multicore mode in single-core mode; this is safer if you start getting crashes when you set multiple cores. - EXPERIMENTAL -The number of cores to use in multicore mode. -Keep 0 to disable multicore mode. -The maximum value should be your number of cores minus 1, -for example, 3 if you have a 4-core CPU. + EXPERIMENTAL +Кількість ядер для використання в режимі multicor. +Залиште 0, щоб вимкнути багатокорний режим. +Максимальне значення має бути вашою кількістю ядер мінус 1, +наприклад, якщо у вас є 4-ядерний процесор. -Set it to 1 to use multicore mode in single-core mode; this is safer -if you start getting crashes when you set multiple cores. +Встановіть значення 1, щоб використовувати режим multicore в одноядерному режимі; це безпечніше +якщо почати аварійне завершення роботи при встановленні декількох ядер. Number of cores to use (experimental) - Number of cores to use (experimental) + Кількість ядер для використання (експериментальна) @@ -6231,15 +6236,15 @@ if you start getting crashes when you set multiple cores. objects that are usually found in an IFC file are not imported, and all objects are placed in a 'Group' instead. 'Buildings' and 'Storeys' are still imported if there is more than one. - If this option is checked, the default 'Project', 'Site', 'Building', and 'Storeys' -objects that are usually found in an IFC file are not imported, and all objects -are placed in a 'Group' instead. -'Buildings' and 'Storeys' are still imported if there is more than one. + Якщо позначено цей пункт, типовий 'Проект', 'Сайт', 'Будівля', 'Сцена', і 'Storeys' +об'єкти, які зазвичай зустрічаються в файлі ICS, не імпортуються, і натомість всі об'єкти +розміщуються в 'Group'. +'Будівлі' і 'Магазин' все ще імпортуються, якщо їх більше немає. Replace 'Project', 'Site', 'Building', and 'Storey' with 'Group' - Replace 'Project', 'Site', 'Building', and 'Storey' with 'Group' + Замініть 'Проект', 'Сайт', 'Будівля', і 'Магазин' на 'Групу' @@ -6247,7 +6252,7 @@ are placed in a 'Group' instead. Arch tools - Arch tools + Інструменти арки @@ -6270,7 +6275,7 @@ are placed in a 'Group' instead. Creation - Creation + Створення @@ -6280,7 +6285,7 @@ are placed in a 'Group' instead. Modification - Modification + Модифікація diff --git a/src/Mod/Arch/Resources/translations/Arch_val-ES.qm b/src/Mod/Arch/Resources/translations/Arch_val-ES.qm index 4f131ddc82..63c85fab8d 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_val-ES.qm and b/src/Mod/Arch/Resources/translations/Arch_val-ES.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_val-ES.ts b/src/Mod/Arch/Resources/translations/Arch_val-ES.ts index 6111a01eb2..2c43397d6f 100644 --- a/src/Mod/Arch/Resources/translations/Arch_val-ES.ts +++ b/src/Mod/Arch/Resources/translations/Arch_val-ES.ts @@ -574,47 +574,47 @@ Si és fals, els objectes no sòlids també es tallaran, amb possibles resultats erronis - + The display length of this section plane La longitud que es visualitza del pla de secció - + The display height of this section plane L'alçària que es visualitza del pla de secció - + The size of the arrows of this section plane La mida de les fletxes del pla de secció - + Show the cut in the 3D view Mostra el tall en la vista 3D - + The rendering mode to use El mode de renderització que s'ha d'utilitzar - + If cut geometry is shown or not Si es mostra o no la geometria de tall - + If cut geometry is filled or not Si s'ompli o no la geometria de tall - + The size of the texts inside this object La mida dels textos dins d'aquest objecte - + If checked, source objects are displayed regardless of being visible in the 3D model Si està marcada, els objectes d'origen es mostren independentment que siguen visibles en el model 3D @@ -769,7 +769,7 @@ El text que s'ha de mostrar. Utilitzeu $area, $label, $tag, $floor, $walls, $ceiling per a inserir les dades corresponents - + The name of the font El nom del tipus de lletra @@ -779,7 +779,7 @@ El color de l'àrea de text - + The size of the text font La mida del tipus de lletra del text @@ -1039,12 +1039,12 @@ La llista dels gruixos de capa - + The line color of the projected objects El color de la línia dels objectes projectats - + The color of the cut faces (if turned on) El color de les cares retallades (si està activat) @@ -1219,7 +1219,7 @@ La forma d'aquest objecte - + The line width of this object L'amplària de la línia d'aquest objecte @@ -1349,17 +1349,17 @@ Els documents que el pla de secció ha de tindre en compte. Buit significa el document sencer. - + The transparency of this object La transparència d'aquest objecte - + The color of this object El color d'aquest objecte - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) La distància entre el pla de tall i la vista real del tall (manteniu aquest valor molt baix però no a zero) @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Show the label in the 3D view @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Angle - + is not closed no està tancat - + is not valid no és vàlid - + doesn't contain any solid no conté cap sòlid - + contains a non-closed solid conté un sòlid no tancat - + contains faces that are not part of any solid conté cares que no formen part de cap sòlid - + Grouping Agrupa - + Ungrouping Desagrupa - + Split Mesh Divideix la malla - + Mesh to Shape Malla a forma @@ -2267,12 +2272,12 @@ el fitxer %s s'ha creat correctament. - + Add space boundary Afig un límit espacial - + Remove space boundary Suprimeix el límit espacial @@ -2357,17 +2362,17 @@ Crea un sistema estructural - + Object doesn't have settable IFC Attributes L'objecte no té atributs d'IFC configurables - + Disabling Brep force flag of object Desactiva l'indicador de Brep forçat de l'objecte - + Enabling Brep force flag of object Activa l'indicador de Brep forçat de l'objecte @@ -2487,7 +2492,7 @@ Alçària (mm) - + Create Component Crea un component @@ -2512,22 +2517,22 @@ Categoria - + Key Clau - + Value Valor - + Unit Unitat - + Create IFC properties spreadsheet Crea el full de càlcul de propietats IFC @@ -2727,7 +2732,7 @@ Importa el fitxer CSV - + Export CSV File Exporta el fitxer CSV @@ -2948,47 +2953,47 @@ Elements de finestra - + Survey Recollida de dades - + Set description Estableix una descripció - + Clear Neteja - + Copy Length Copia la llargària - + Copy Area Copia l'àrea - + Export CSV Exporta a CSV - + Description Descripció - + Area Àrea - + Total Total @@ -3038,17 +3043,17 @@ Crea un BuildingPart - + Invalid cutplane Pla de tall no vàlid - + All good! No problems found Tot correcte. No s'ha trobat cap problema - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: L'objecte no té un atribut IfcProperties. Cancel·la la creació de fulls de càlcul per a l'objecte: @@ -3203,37 +3208,37 @@ Crea una referència externa - + Section plane settings Configuració del pla de secció - + Objects seen by this section plane: Objectes vistos en aquest pla de secció: - + Section plane placement: Posicionament del pla de secció: - + Rotate X Gira X - + Rotate Y Gira Y - + Rotate Z Gira Z - + Resize Canvia la mida @@ -3368,42 +3373,42 @@ S'ha importat correctament - + Remove highlighted objects from the list above Elimina els objectes ressaltats de la llista anterior - + Add selected Afig el seleccionat - + Add selected object(s) to the scope of this section plane Afig l'objecte o els objectes seleccionats a l'àmbit d'aquest pla de secció - + Rotates the plane along the X axis Gira el pla al llarg de l'eix X - + Rotates the plane along the Y axis Gira el pla al llarg de l'eix Y - + Rotates the plane along the Z axis Gira el pla al llarg de l'eix Z - + Resizes the plane to fit the objects in the list above Canvia la mida del pla per a ajustar els objectes en la llista anterior - + Centers the plane on the objects in the list above Centra el pla sobre els objectes de la llista anterior @@ -3890,12 +3895,12 @@ Floor creation aborted. Arch_Add - + Add component Afig un component - + Adds the selected components to the active object Afig els components seleccionats a l'objecte actiu @@ -3973,12 +3978,12 @@ Floor creation aborted. Arch_Check - + Check Comprova - + Checks the selected objects for problems Comprova si els objectes seleccionats presenten algun problema @@ -3986,12 +3991,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component Clona el component - + Clones an object as an undefined architectural component Clona un objecte com a component arquitectònic no definit @@ -3999,12 +4004,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes Tanca els forats - + Closes holes in open shapes, turning them solids Tanca els forats en les formes obertes, així les converteix en sòlids @@ -4012,12 +4017,12 @@ Floor creation aborted. Arch_Component - + Component Component - + Creates an undefined architectural component Crea un component arquitectònic no definit @@ -4176,12 +4181,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Crea un full de càlcul IFC... - + Creates a spreadsheet to store IFC properties of an object. Crea un full de càlcul per a emmagatzemar propietats IFC d'un objecte. @@ -4223,12 +4228,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape Malla a forma - + Turns selected meshes into Part Shape objects Transforma les malles seleccionades en formes de peça @@ -4395,12 +4400,12 @@ Floor creation aborted. Arch_Remove - + Remove component Elimina el component - + Remove the selected components from their parents, or create a hole in a component Elimina les components seleccionats dels seus pares, o crea un forat en un component @@ -4408,12 +4413,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Suprimeix la forma de l'arquitectura - + Removes cubic shapes from Arch components Suprimeix les formes cúbiques dels components de l'arquitectura @@ -4460,12 +4465,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Selecciona malles de no-multiplicitat - + Selects all non-manifold meshes from the document or from the selected groups Selecciona totes les malles de no-multiplicitat del document o dels grups seleccionats @@ -4504,12 +4509,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh Divideix la malla - + Splits selected meshes into independent components Divideix les malles seleccionades en components independents @@ -4538,12 +4543,12 @@ Floor creation aborted. Arch_Survey - + Survey Recollida de dades - + Starts survey Inicia la recollida de dades @@ -4551,12 +4556,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Commuta l'indicador de Brep IFC - + Force an object to be exported as Brep or not Imposa (o no) que un objecte s'exporte com a Brep @@ -4564,12 +4569,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents Commuta els subcomponents - + Shows or hides the subcomponents of this object Mostra o amaga els subcomponents de l'objecte diff --git a/src/Mod/Arch/Resources/translations/Arch_vi.qm b/src/Mod/Arch/Resources/translations/Arch_vi.qm index e3ed512d12..09f868328f 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_vi.qm and b/src/Mod/Arch/Resources/translations/Arch_vi.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_vi.ts b/src/Mod/Arch/Resources/translations/Arch_vi.ts index f861399fea..8cd25e7ef3 100644 --- a/src/Mod/Arch/Resources/translations/Arch_vi.ts +++ b/src/Mod/Arch/Resources/translations/Arch_vi.ts @@ -574,47 +574,47 @@ Nếu sai, những vật không phải chất rắn cũng sẽ bị cắt, với kết quả sai nhất có thể. - + The display length of this section plane Chiều dài hiển thị của mặt cắt này - + The display height of this section plane Chiều cao hiển thị của mặt cắt này - + The size of the arrows of this section plane Kích thước mũi tên chỉ hướng của mặt cắt này - + Show the cut in the 3D view Hiển thị vết cắt ở chế độ xem 3D - + The rendering mode to use Chế độ hình chiếu để sử dụng - + If cut geometry is shown or not Nếu hình cắt có được hiển thị hay không - + If cut geometry is filled or not Nếu hình cắt có được lấp đầy hay không - + The size of the texts inside this object Kích thước của các văn bản bên trong bộ phận này - + If checked, source objects are displayed regardless of being visible in the 3D model Nếu được chọn, các đối tượng sẽ hiển thị bất kể chúng có hiển thị trong mô hình 3D hay không @@ -769,7 +769,7 @@ Để hiển thị văn bản. Sử dụng $area, $label, $tag, $floor, $walls, $ceiling để chèn các loại dữ liệu tương ứng - + The name of the font Tên của phông chữ @@ -779,7 +779,7 @@ Màu chữ của văn bản trong khu vực - + The size of the text font Kích cỡ phông chữ của văn bản @@ -1039,12 +1039,12 @@ Danh sách của chiều dày các lớp - + The line color of the projected objects Màu đường của các đối tượng được chiếu - + The color of the cut faces (if turned on) Màu sắc của các mặt cắt (nếu kích hoạt) @@ -1219,7 +1219,7 @@ Hình dạng của bộ phận này - + The line width of this object Chiều dài đường vẽ của bộ phận này @@ -1349,17 +1349,17 @@ The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object Độ trong suốt của đối tượng này - + The color of this object Màu sắc của đối tượng này - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) Khoảng cách giữa mặt phẳng được cắt và chế độ xem cắt thực tế (giữ giá trị rất nhỏ nhưng không bằng 0) @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Show the label in the 3D view @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ Góc - + is not closed không kín - + is not valid không hợp lệ - + doesn't contain any solid không chứa bất kỳ vật thể rắn nào - + contains a non-closed solid chứa một vật thể rắn có bề mặt không kín - + contains faces that are not part of any solid chứa các bề mặt mà không thuộc một vật thể rắn nào - + Grouping Nhóm lại - + Ungrouping Tách nhóm ra - + Split Mesh Chia lưới - + Mesh to Shape Chuyển đổi từ lưới sang hình dạng @@ -2267,12 +2272,12 @@ tệp tin %s đã được tạo thành công. - + Add space boundary Thêm đường bao không gian - + Remove space boundary Gỡ đường bao không gian @@ -2357,17 +2362,17 @@ Tạo hệ thống kết cấu - + Object doesn't have settable IFC Attributes Đối tượng không có đặc tính IFC mà có thể điều chỉnh được - + Disabling Brep force flag of object Vô hiệu hóa cài đặt chế độ tắt/mở cưỡng bức- Brep của đối tượng - + Enabling Brep force flag of object Cho phép cài đặt chế độ tắt/mở cưỡng bức- Brep của đối tượng @@ -2487,7 +2492,7 @@ Chiều cao (mm) - + Create Component Tạo bộ phận @@ -2512,22 +2517,22 @@ Thể loại - + Key Chìa khóa - + Value Giá trị - + Unit Đơn vị - + Create IFC properties spreadsheet Tạo bảng thuộc tính IFC @@ -2727,7 +2732,7 @@ Nhập tệp CSV - + Export CSV File Xuất tệp CSV @@ -2949,47 +2954,47 @@ Các bộ phận của cửa sổ - + Survey Khảo sát - + Set description Đặt phần mô tả - + Clear Xóa - + Copy Length Sao chép chiều dài - + Copy Area Sao chép khu vực - + Export CSV Xuất CSV - + Description Mô tả - + Area Khu vực - + Total Tổng @@ -3039,17 +3044,17 @@ Create BuildingPart - + Invalid cutplane Mặt phẳng cắt không hợp lệ - + All good! No problems found Tất cả đều tốt! Không tìm thấy vấn đề nào - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: Đối tượng không có thuộc tính IfcProperties. Hủy tạo bảng tính cho đối tượng: @@ -3204,37 +3209,37 @@ Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3369,42 +3374,42 @@ Đã nhập thành công - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Thêm đối tượng đã chọn - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3891,12 +3896,12 @@ Floor creation aborted. Arch_Add - + Add component Thêm bộ phận - + Adds the selected components to the active object Thêm các bộ phận được chọn vào đối tượng đang hoạt động @@ -3974,12 +3979,12 @@ Floor creation aborted. Arch_Check - + Check Kiểm tra - + Checks the selected objects for problems Kiểm soát sự cố cho các đối tượng đã chọn @@ -3987,12 +3992,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component Thành phần Clone - + Clones an object as an undefined architectural component Nhân bản một đối tượng dưới dạng phần tử kiến trúc không xác định @@ -4000,12 +4005,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes Đóng lỗ - + Closes holes in open shapes, turning them solids Đóng lỗ trong hình dạng mở và chuyển đổi chúng thành chất rắn @@ -4013,12 +4018,12 @@ Floor creation aborted. Arch_Component - + Component Thành phần - + Creates an undefined architectural component Tạo một đối tượng dưới dạng phần tử kiến trúc không xác định @@ -4177,12 +4182,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Tạo bảng tính IFC... - + Creates a spreadsheet to store IFC properties of an object. Tạo bảng tính để lưu các thuộc tính IFC của đối tượng. @@ -4224,12 +4229,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape Chuyển đổi từ lưới sang hình dạng - + Turns selected meshes into Part Shape objects Chuyển đổi các lưới đã chọn thành các đối tượng hình dạng @@ -4396,12 +4401,12 @@ Floor creation aborted. Arch_Remove - + Remove component Tháo dỡ bộ phận - + Remove the selected components from their parents, or create a hole in a component Gỡ bỏ các bộ phận đã chọn khỏi các đối tượng gốc của chúng hoặc tạo một lỗ trong một bộ phận @@ -4409,12 +4414,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch Xóa Hình dạng khỏi Kiến trúc - + Removes cubic shapes from Arch components Loại bỏ các hình khối từ các thành phần Kiến trúc @@ -4461,12 +4466,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes Chọn lưới non-manifold - + Selects all non-manifold meshes from the document or from the selected groups Chọn tất cả các lưới non-manifold từ tài liệu hoặc từ các nhóm đã chọn @@ -4505,12 +4510,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh Chia lưới - + Splits selected meshes into independent components Chia các lưới đã chọn ra thành các bộ phận độc lập @@ -4539,12 +4544,12 @@ Floor creation aborted. Arch_Survey - + Survey Khảo sát - + Starts survey Bắt đầu khảo sát @@ -4552,12 +4557,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag Bật hoặc tắt cờ IFC Brep - + Force an object to be exported as Brep or not Bắt buộc một đối tượng phải được xuất dưới dạng Brep hay không @@ -4565,12 +4570,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents Bật / tắt các thành phần phụ - + Shows or hides the subcomponents of this object Hiển thị hoặc ẩn các thành phần phụ của đối tượng này diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm b/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm index fb0f7aea97..11dd9859cf 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm and b/src/Mod/Arch/Resources/translations/Arch_zh-CN.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts b/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts index 42718c26fb..9cc8dcd7e3 100644 --- a/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts +++ b/src/Mod/Arch/Resources/translations/Arch_zh-CN.ts @@ -574,47 +574,47 @@ 如果是假的, 非固态的也会被剪切, 可能会有错误的结果。 - + The display length of this section plane 此剖面的显示长度 - + The display height of this section plane 此剖面平面的显示高度 - + The size of the arrows of this section plane 此剖面箭头的大小 - + Show the cut in the 3D view 在3D 视图中显示修剪 - + The rendering mode to use 要使用的渲染模式 - + If cut geometry is shown or not 几何属性是否显示 - + If cut geometry is filled or not 几何属性是否填充 - + The size of the texts inside this object 此对象内文本的大小 - + If checked, source objects are displayed regardless of being visible in the 3D model 如果选中, 则无论在3D 模型中是否可见, 都将显示源对象 @@ -769,7 +769,7 @@ 要显示的文本。使用$area，$label，$label，$tag，$floor，$floor，$walls，$ceiling来插入各自的数据 - + The name of the font 字体的名称 @@ -779,7 +779,7 @@ 区域文本的颜色 - + The size of the text font 文本字体的大小 @@ -1039,12 +1039,12 @@ 层厚度列表 - + The line color of the projected objects 投影对象的线条颜色 - + The color of the cut faces (if turned on) 剪切面的颜色 (如果打开) @@ -1219,7 +1219,7 @@ 此对象的形状 - + The line width of this object 此对象的线条宽度 @@ -1349,17 +1349,17 @@ 此剖切平面需考虑的物体. 空表示文档中所有物体. - + The transparency of this object 此对象的透明度 - + The color of this object 此对象的颜色 - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) 切割平面和实际视图切割之间的距离 (保持一个非常小的值, 但不是零) @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Show the label in the 3D view @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ 角度 - + is not closed 不闭合 - + is not valid 无效 - + doesn't contain any solid 不含实体 - + contains a non-closed solid 包含未封闭实体 - + contains faces that are not part of any solid 包含不属于任何实体的面 - + Grouping 成组 - + Ungrouping 解组 - + Split Mesh 拆分网格 - + Mesh to Shape 网格转换为形体 @@ -2267,12 +2272,12 @@ 文件%s已成功创建. - + Add space boundary 添加空间边界 - + Remove space boundary 移除空间边界 @@ -2357,17 +2362,17 @@ 创建结构体系 - + Object doesn't have settable IFC Attributes 对象没有可设置的 IFC 属性 - + Disabling Brep force flag of object 禁用 Brep 对象的强制标志 - + Enabling Brep force flag of object 启用 Brep 对象的强制标志 @@ -2487,7 +2492,7 @@ 高度(毫米) - + Create Component 新增组件 @@ -2512,22 +2517,22 @@ 类别 - + Key 关键字 - + Value 值 - + Unit 单位 - + Create IFC properties spreadsheet 创建 IFC 属性电子表格 @@ -2727,7 +2732,7 @@ 导入 CSV 文件 - + Export CSV File 导出 CSV 文件 @@ -2949,47 +2954,47 @@ 窗口构件 - + Survey 调查 - + Set description 设置描述 - + Clear 清除 - + Copy Length 复制长度 - + Copy Area 复制面积 - + Export CSV 导出 CSV - + Description 描述 - + Area 面积 - + Total 总计 @@ -3039,17 +3044,17 @@ 创建建筑物 - + Invalid cutplane 无效的剖面 - + All good! No problems found 一切正常! 未发现问题 - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: 该对象没有 IfcProperties 属性。取消对象的电子表格创建: @@ -3204,37 +3209,37 @@ 创建外部引用 - + Section plane settings 截面平面设置 - + Objects seen by this section plane: 剖面中所看到的对象: - + Section plane placement: 截面平面放置: - + Rotate X 沿 X 轴旋转 - + Rotate Y 旋转 Y - + Rotate Z 绕Z轴旋转 - + Resize 调整尺寸 @@ -3369,42 +3374,42 @@ 导入成功 - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected 添加所选 - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3891,12 +3896,12 @@ Floor creation aborted. Arch_Add - + Add component 添加组件 - + Adds the selected components to the active object 将选定的组件添加到当前对象 @@ -3974,12 +3979,12 @@ Floor creation aborted. Arch_Check - + Check 检查 - + Checks the selected objects for problems 检查所选对象的问题 @@ -3987,12 +3992,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component 克隆组件 - + Clones an object as an undefined architectural component 将对象克隆为未定义的建筑组件 @@ -4000,12 +4005,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes 封闭孔 - + Closes holes in open shapes, turning them solids 封闭开孔形体,转换为实体 @@ -4013,12 +4018,12 @@ Floor creation aborted. Arch_Component - + Component 组件 - + Creates an undefined architectural component 创建未定义的建筑组件 @@ -4177,12 +4182,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... 创建 IFC 电子表格..。 - + Creates a spreadsheet to store IFC properties of an object. 创建一个电子表格以存储对象的ifc 属性。 @@ -4224,12 +4229,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape 网格转换为形体 - + Turns selected meshes into Part Shape objects 转换所选网格为零件形体对象 @@ -4396,12 +4401,12 @@ Floor creation aborted. Arch_Remove - + Remove component 删除组件 - + Remove the selected components from their parents, or create a hole in a component 从父对象中删除选定组件,或在组件上创建孔 @@ -4409,12 +4414,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch 从建筑元素中移除形体 - + Removes cubic shapes from Arch components 从建筑组件移除立方体 @@ -4461,12 +4466,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes 选择非流形网格 - + Selects all non-manifold meshes from the document or from the selected groups 选择文档中或所选组中的所有非流形网格 @@ -4505,12 +4510,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh 拆分网格 - + Splits selected meshes into independent components 将选定的网格拆分为独立组件 @@ -4539,12 +4544,12 @@ Floor creation aborted. Arch_Survey - + Survey 调查 - + Starts survey 开始调查 @@ -4552,12 +4557,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag 切换 IFC Brep 标志 - + Force an object to be exported as Brep or not 强制是否将对象导出为 Brep @@ -4565,12 +4570,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents 切换子组件 - + Shows or hides the subcomponents of this object 显示或隐藏此对象的子组件 diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm b/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm index 296f063f44..d1f3f649ce 100644 Binary files a/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm and b/src/Mod/Arch/Resources/translations/Arch_zh-TW.qm differ diff --git a/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts b/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts index 4bfed8d39b..81dfcac3d9 100644 --- a/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts +++ b/src/Mod/Arch/Resources/translations/Arch_zh-TW.ts @@ -574,47 +574,47 @@ 如果是假的，非固態的也會被剪切，可能會有錯誤的結果。 - + The display length of this section plane 此剖面的顯示長度 - + The display height of this section plane 此剖面的顯示高度 - + The size of the arrows of this section plane 此剖面箭頭的大小 - + Show the cut in the 3D view 在3 D 視圖中顯示修剪 - + The rendering mode to use 要使用的渲染模式 - + If cut geometry is shown or not 是否顯示修剪幾何 - + If cut geometry is filled or not 修剪幾何是否填充 - + The size of the texts inside this object 此對象內文本的大小 - + If checked, source objects are displayed regardless of being visible in the 3D model 如果選中，則無論在 3D 模型中是否可見，都將顯示源對象 @@ -769,7 +769,7 @@ The text to show. Use $area, $label, $tag, $floor, $walls, $ceiling to insert the respective data - + The name of the font The name of the font @@ -779,7 +779,7 @@ The color of the area text - + The size of the text font The size of the text font @@ -1039,12 +1039,12 @@ 層厚度清單 - + The line color of the projected objects The line color of the projected objects - + The color of the cut faces (if turned on) 修剪面的顏色 (如果打開) @@ -1219,7 +1219,7 @@ The shape of this object - + The line width of this object The line width of this object @@ -1349,17 +1349,17 @@ The objects that must be considered by this section plane. Empty means the whole document. - + The transparency of this object The transparency of this object - + The color of this object The color of this object - + The distance between the cut plane and the actual view cut (keep this a very small value but not zero) The distance between the cut plane and the actual view cut (keep this a very small value but not zero) @@ -1989,7 +1989,7 @@ Specifies if the direction of the roof should be flipped - + Show the label in the 3D view Show the label in the 3D view @@ -2038,6 +2038,11 @@ If not zero, the axes are not represented as one full line but as two lines of the given length If not zero, the axes are not represented as one full line but as two lines of the given length + + + Geometry further than this value will be cut off. Keep zero for unlimited. + Geometry further than this value will be cut off. Keep zero for unlimited. + Arch @@ -2087,47 +2092,47 @@ 角度 - + is not closed 未封閉 - + is not valid 錯誤 - + doesn't contain any solid 未包含任何物體 - + contains a non-closed solid 包含一個未封閉物體 - + contains faces that are not part of any solid 具有非任何實體部份之面 - + Grouping 群組 - + Ungrouping 取消群組 - + Split Mesh 分割Mesh - + Mesh to Shape 形狀的網格 @@ -2267,12 +2272,12 @@ 成功建立%s檔 - + Add space boundary Add space boundary - + Remove space boundary Remove space boundary @@ -2357,17 +2362,17 @@ 建立結構系統 - + Object doesn't have settable IFC Attributes Object doesn't have settable IFC Attributes - + Disabling Brep force flag of object Disabling Brep force flag of object - + Enabling Brep force flag of object Enabling Brep force flag of object @@ -2487,7 +2492,7 @@ 高(mm) - + Create Component Create Component @@ -2512,22 +2517,22 @@ 類別 - + Key Key - + Value 值 - + Unit 單位 - + Create IFC properties spreadsheet Create IFC properties spreadsheet @@ -2727,7 +2732,7 @@ Import CSV File - + Export CSV File Export CSV File @@ -2949,47 +2954,47 @@ Window elements - + Survey 查詢 - + Set description Set description - + Clear 清除 - + Copy Length Copy Length - + Copy Area Copy Area - + Export CSV Export CSV - + Description 說明 - + Area Area - + Total Total @@ -3039,17 +3044,17 @@ Create BuildingPart - + Invalid cutplane Invalid cutplane - + All good! No problems found All good! No problems found - + The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: The object doesn't have an IfcProperties attribute. Cancel spreadsheet creation for object: @@ -3204,37 +3209,37 @@ Create external reference - + Section plane settings Section plane settings - + Objects seen by this section plane: Objects seen by this section plane: - + Section plane placement: Section plane placement: - + Rotate X Rotate X - + Rotate Y Rotate Y - + Rotate Z Rotate Z - + Resize Resize @@ -3369,42 +3374,42 @@ Successfully imported - + Remove highlighted objects from the list above Remove highlighted objects from the list above - + Add selected Add selected - + Add selected object(s) to the scope of this section plane Add selected object(s) to the scope of this section plane - + Rotates the plane along the X axis Rotates the plane along the X axis - + Rotates the plane along the Y axis Rotates the plane along the Y axis - + Rotates the plane along the Z axis Rotates the plane along the Z axis - + Resizes the plane to fit the objects in the list above Resizes the plane to fit the objects in the list above - + Centers the plane on the objects in the list above Centers the plane on the objects in the list above @@ -3891,12 +3896,12 @@ Floor creation aborted. Arch_Add - + Add component 增加組件 - + Adds the selected components to the active object 增加選定組件至目前物件 @@ -3974,12 +3979,12 @@ Floor creation aborted. Arch_Check - + Check 確認 - + Checks the selected objects for problems 檢查所選物件之問題 @@ -3987,12 +3992,12 @@ Floor creation aborted. Arch_CloneComponent - + Clone component Clone component - + Clones an object as an undefined architectural component Clones an object as an undefined architectural component @@ -4000,12 +4005,12 @@ Floor creation aborted. Arch_CloseHoles - + Close holes 封閉空洞 - + Closes holes in open shapes, turning them solids 於封閉開口之造型並轉為實體 @@ -4013,12 +4018,12 @@ Floor creation aborted. Arch_Component - + Component Component - + Creates an undefined architectural component Creates an undefined architectural component @@ -4177,12 +4182,12 @@ Floor creation aborted. Arch_IfcSpreadsheet - + Create IFC spreadsheet... Create IFC spreadsheet... - + Creates a spreadsheet to store IFC properties of an object. Creates a spreadsheet to store IFC properties of an object. @@ -4224,12 +4229,12 @@ Floor creation aborted. Arch_MeshToShape - + Mesh to Shape 形狀的網格 - + Turns selected meshes into Part Shape objects 轉換選定之網格為零件造型物件 @@ -4396,12 +4401,12 @@ Floor creation aborted. Arch_Remove - + Remove component 移除原件 - + Remove the selected components from their parents, or create a hole in a component 由其家族中移除選定物件或於物建中建立空洞 @@ -4409,12 +4414,12 @@ Floor creation aborted. Arch_RemoveShape - + Remove Shape from Arch 由建築中移除造型 - + Removes cubic shapes from Arch components 移除建築元件中之方塊形狀 @@ -4461,12 +4466,12 @@ Floor creation aborted. Arch_SelectNonSolidMeshes - + Select non-manifold meshes 選擇非重疊網格 - + Selects all non-manifold meshes from the document or from the selected groups 由檔案或所選之群組中選取所有非重疊網格 @@ -4505,12 +4510,12 @@ Floor creation aborted. Arch_SplitMesh - + Split Mesh 分割Mesh - + Splits selected meshes into independent components 分割選定Mesh為獨立物件 @@ -4539,12 +4544,12 @@ Floor creation aborted. Arch_Survey - + Survey 查詢 - + Starts survey 開始查詢 @@ -4552,12 +4557,12 @@ Floor creation aborted. Arch_ToggleIfcBrepFlag - + Toggle IFC Brep flag 切換 IFC Brep 標示 - + Force an object to be exported as Brep or not 是否強制將一物件以Brep格式匯出 @@ -4565,12 +4570,12 @@ Floor creation aborted. Arch_ToggleSubs - + Toggle subcomponents Toggle subcomponents - + Shows or hides the subcomponents of this object Shows or hides the subcomponents of this object diff --git a/src/Mod/Draft/Resources/translations/Draft_af.qm b/src/Mod/Draft/Resources/translations/Draft_af.qm index 0a30b57c88..4ea6d1fd9d 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_af.qm and b/src/Mod/Draft/Resources/translations/Draft_af.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_af.ts b/src/Mod/Draft/Resources/translations/Draft_af.ts index 2de53d958b..e43bdf53a6 100644 --- a/src/Mod/Draft/Resources/translations/Draft_af.ts +++ b/src/Mod/Draft/Resources/translations/Draft_af.ts @@ -568,61 +568,40 @@ This property is read-only, as the number depends on the points contained within Parameterization factor - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Show hidden lines - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments - - - - If this is True, this object will be recomputed only if it is - visible - If this is True, this object will be recomputed only if it is - visible - Start angle of the elliptical arc @@ -1024,62 +1003,62 @@ beyond the dimension line The line color of the objects contained within this layer, when used on a TechDraw page - + Line width Line width - + Line color Line color - + The size of the text The size of the text - + The font of the text The font of the text - + The vertical alignment of the text The vertical alignment of the text - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The size of the arrow The size of the arrow - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Display a leader line or not Display a leader line or not @@ -1113,10 +1092,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1641,27 +1651,27 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Warning @@ -3754,20 +3764,40 @@ value by using the [ and ] keys while drawing Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Selected - + Texts/dims Texts/dims + + + Text spacing + Text spacing + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Line spacing + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -7003,12 +7033,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7446,7 +7476,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_ar.qm b/src/Mod/Draft/Resources/translations/Draft_ar.qm index fc2dcaf3fb..70b42dfd31 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ar.qm and b/src/Mod/Draft/Resources/translations/Draft_ar.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ar.ts b/src/Mod/Draft/Resources/translations/Draft_ar.ts index d9164e2162..13be9d10b4 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ar.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ar.ts @@ -568,61 +568,40 @@ This property is read-only, as the number depends on the points contained within Parameterization factor - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines إظهار الخطوط المخفية - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments - - - - If this is True, this object will be recomputed only if it is - visible - If this is True, this object will be recomputed only if it is - visible - Start angle of the elliptical arc @@ -1024,62 +1003,62 @@ beyond the dimension line The line color of the objects contained within this layer, when used on a TechDraw page - + Line width عرض الخط - + Line color لون الخط - + The size of the text The size of the text - + The font of the text The font of the text - + The vertical alignment of the text The vertical alignment of the text - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The size of the arrow The size of the arrow - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Display a leader line or not Display a leader line or not @@ -1113,10 +1092,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1641,27 +1651,27 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Warning @@ -3754,20 +3764,40 @@ value by using the [ and ] keys while drawing Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected تم الإختيار - + Texts/dims Texts/dims + + + Text spacing + Text spacing + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + تباعد الأسطر + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -7006,12 +7036,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7449,7 +7479,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_ca.qm b/src/Mod/Draft/Resources/translations/Draft_ca.qm index 20980d53f6..5700c4acd4 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ca.qm and b/src/Mod/Draft/Resources/translations/Draft_ca.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ca.ts b/src/Mod/Draft/Resources/translations/Draft_ca.ts index 01424d1ba1..c74afe3719 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ca.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ca.ts @@ -564,58 +564,40 @@ Aquesta propietat és només de lectura, jau que el nombre depèn dels punts con Factor de parametrització - + The base object this 2D view must represent L'objecte de base que és representat per aquesta visualització 2D - + The projection vector of this object El vector de projecció d'aquest objecte - + The way the viewed object must be projected Manera en què l'objecte mostrat ha de ser projectat - + The indices of the faces to be projected in Individual Faces mode Els índexs de les cares que seran projectades en el mode Cares Individuals - + Show hidden lines Mostra les línies amagades - + Fuse wall and structure objects of same type and material Fusiona la paret i els objectes estructurals del mateix tipus i material - + Tessellate Ellipses and B-splines into line segments Fragmenta el·lipses i B-splines en segments de línia - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - Pels mode Tallacares i Tallalínies, deixa les cares al lloc del tall - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Longitud dels segments de línia si es fragmenten El·lipses o B-splines en segments de línia - - - - If this is True, this object will be recomputed only if it is - visible - Si és Cert, aquest objecte es recalcularà només si es visible - Start angle of the elliptical arc @@ -1008,62 +990,62 @@ beyond the dimension line El color de línia dels objectes continguts en aquesta capa, quan son utilitzats a una pàgina TechDraw - + Line width Amplada de línia - + Line color Color de línia - + The size of the text Mida del text - + The font of the text Tipus de lletra del text - + The vertical alignment of the text Aliniació vertical del text - + Text color Color del text - + Line spacing (relative to font size) Interliniat (relatiu a la mida de la lletra) - + The maximum number of characters on each line of the text box Nombre màxim de caracters a cada línia d'una caixa de text - + The size of the arrow Mida de la fletxa - + The type of arrow of this label Tipus de fletxa d'aquesta etiqueta - + The type of frame around the text of this object Tipus de marc al voltant del text d'aquest objecte - + Display a leader line or not Mostra o amaga la línia guia @@ -1097,10 +1079,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1622,27 +1635,27 @@ La matriu es pot convertir en polar o circular canviant-ne el tipus.No s'ha definit la direcció de desplaçament. Si us plau, moveu el ratolí a un o altre costat de l'objecte abans per indicar-ne la direcció - + Save style Desa l'estil - + Name of this new style: Nom d'aquest nou estil: - + Name exists. Overwrite? Aquest nom ja existeix. El vols sobreescriure? - + Error: json module not found. Unable to save style Error: no s'ha trobat el mòdul json. Impossible salvar l'estil - + Warning Warning @@ -3706,20 +3719,40 @@ valor mitjançant les tecles [ i ] mentre es dibuixa Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Seleccionat - + Texts/dims Texts/dims + + + Text spacing + Espaiat de text + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Interlineat + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -6938,12 +6971,12 @@ Per permetre que FreeCAD descarregui aquestes llibreries respongueu Sí.Seleccioneu un objecte Esbós per editar - + No edit point found for selected object No s`ha trobat cap punt d'edició per l'objecte seleccionat - + : this object is not editable : aquest objete no es editable @@ -7381,7 +7414,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledNo es poden escalar els objectes: - + Too many objects selected, max number set to: S'han seleccionat massa objectes, el màxim està establert en: diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.qm b/src/Mod/Draft/Resources/translations/Draft_cs.qm index ac2d7a4a65..8ceadf8c05 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_cs.qm and b/src/Mod/Draft/Resources/translations/Draft_cs.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_cs.ts b/src/Mod/Draft/Resources/translations/Draft_cs.ts index 63e11215e5..35ffa1a359 100644 --- a/src/Mod/Draft/Resources/translations/Draft_cs.ts +++ b/src/Mod/Draft/Resources/translations/Draft_cs.ts @@ -560,61 +560,40 @@ Tato vlastnost je pouze pro čtení, protože počet prvků závisí na bodech o Parameterization factor - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Zobrazit skryté čáry - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments - - - - If this is True, this object will be recomputed only if it is - visible - If this is True, this object will be recomputed only if it is - visible - Start angle of the elliptical arc @@ -1016,62 +995,62 @@ beyond the dimension line The line color of the objects contained within this layer, when used on a TechDraw page - + Line width Tloušťka čáry - + Line color Barva čáry - + The size of the text Velikost textu - + The font of the text Písmo textu - + The vertical alignment of the text The vertical alignment of the text - + Text color Barva textu - + Line spacing (relative to font size) Line spacing (relative to font size) - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The size of the arrow Velikost šipky - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Display a leader line or not Display a leader line or not @@ -1105,10 +1084,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1633,27 +1643,27 @@ The array can be turned into a polar or a circular array by changing its type.Směr odsazení není definován. Prosím, přesuňte myš na jednu nebo druhou stranu objektu pro naznačení směru - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Warning @@ -2187,7 +2197,7 @@ na polární nebo kruhové a jeho vlastnosti lze upravit. Autogroup - Autogroup + Automatické seskupování @@ -3745,20 +3755,40 @@ value by using the [ and ] keys while drawing Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Vybrané - + Texts/dims Texts/dims + + + Text spacing + Odsazení textu + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Řádkování + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -6991,12 +7021,12 @@ Chcete umožnit FreeCADu stáhnout tyto knihovny? Vyberte objekt Návrhu k úpravě - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7208,7 +7238,7 @@ Chcete umožnit FreeCADu stáhnout tyto knihovny? Autogroup - Autogroup + Automatické seskupování @@ -7434,7 +7464,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_de.qm b/src/Mod/Draft/Resources/translations/Draft_de.qm index 979d76ceb4..ed20dec94f 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_de.qm and b/src/Mod/Draft/Resources/translations/Draft_de.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_de.ts b/src/Mod/Draft/Resources/translations/Draft_de.ts index 0278934fc1..26bee79191 100644 --- a/src/Mod/Draft/Resources/translations/Draft_de.ts +++ b/src/Mod/Draft/Resources/translations/Draft_de.ts @@ -569,59 +569,40 @@ Diese Eigenschaft ist nur lesbar, da die Zahl von den Punkten im 'Punkt Objekt' Parametrierfaktor - + The base object this 2D view must represent Das Basisobjekt, das diese 2D-Ansicht darstellen muss - + The projection vector of this object Der Projektionsvektor dieses Objekts - + The way the viewed object must be projected Die Art, wie das betrachtete Objekt projiziert werden muss - + The indices of the faces to be projected in Individual Faces mode Die Indizes der Flächen werden im individuellen Flächen Modus projiziert - + Show hidden lines Verdeckte Linien anzeigen - + Fuse wall and structure objects of same type and material Wand- und Strukturobjekte von gleicher Art und Material vereinigen - + Tessellate Ellipses and B-splines into line segments Ellipsen und B-Splines in Liniensegmente tessellieren - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - Für Schnittlinien- und Schnittflächenmodi, dies belässt die Flächen an der Schnittposition - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Länge der Linienabschnitte, wenn Ellipsen oder B-Splines - in Linienabschnitte gewandelt werden - - - - If this is True, this object will be recomputed only if it is - visible - Falls wahr, wird das Objekt nur neu berechnet, wenn es sichtbar ist - Start angle of the elliptical arc @@ -1019,62 +1000,62 @@ beyond the dimension line Die Linienfarbe der Objekte in dieser Ebene, wenn sie auf einer TechDraw-Seite verwendet werden - + Line width Linienbreite - + Line color Linienfarbe - + The size of the text Die Größe des Textes - + The font of the text Die Schriftart des Textes - + The vertical alignment of the text Die vertikale Ausrichtung des Textes - + Text color Textfarbe - + Line spacing (relative to font size) Zeilenabstand (abhängig von der Schrifthöhe) - + The maximum number of characters on each line of the text box Die maximale Anzahl von Zeichen pro Zeile im Textfeld - + The size of the arrow Die Größe des Pfeils - + The type of arrow of this label Der Pfeiltyp für diese Beschriftung - + The type of frame around the text of this object Die Art des Rahmens um den Text dieses Objekts - + Display a leader line or not Hinweislinie anzeigen oder nicht @@ -1108,10 +1089,41 @@ Leer lassen für die Standardeinstellung des Systems. Benutzen Sie 'arch' um die US-Bogen Notation zu erzwingen - + A list of exclusion points. Any edge touching any of those points will not be drawn. Eine Liste mit Ausschlusspunkten. Jede Kante, die einen dieser Punkte berührt, wird nicht gezeichnet. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1634,27 +1646,27 @@ Die Anordnung kann in eine orthogonale oder polare Anordnung durch ändern des T Versatz Richtung ist nicht definiert. Bitte bewegen Sie die Maus auf einer Seiten des Objekts zuerst, um eine Richtung anzuzeigen - + Save style Stile speichern - + Name of this new style: Name dieses neuen Stils: - + Name exists. Overwrite? Name existiert. Überschreiben? - + Error: json module not found. Unable to save style Fehler: json-Modul nicht gefunden. Stil konnte nicht gespeichert werden - + Warning Warnung @@ -2758,7 +2770,7 @@ STRG zum Einrasten, SHIFT zum Einschränken Creates a 2-point rectangle. CTRL to snap. - Erstellt eine 2-Punkt-Rechteck. Einrasten mit STRG. + Erstellt ein 2-Punkt-Rechteck. Einrasten mit STRG. @@ -3325,7 +3337,7 @@ Beispielsweise kann es die ausgewählten Objekte zu einem einzigen zusammenfüge Converts a selected polyline to a B-spline, or a B-spline to a polyline. - Konvertiert eine ausgewählte Polyline in eine B-Spline oder eine B-Spline in eine Polyline. + Wandelt einen ausgewählten Linienzug in einen B-Spline oder einen B-Spline in einen Linienzug. @@ -3737,20 +3749,40 @@ value by using the [ and ] keys while drawing Aktuellen Stil als Voreinstellung speichern... - + Apply above style to selected object(s) Obigen Stil auf ausgewählte(s) Objekt(e) anwenden - + Selected Ausgewählt - + Texts/dims Texte/Maße + + + Text spacing + Textabstand + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Zeilenabstand + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -6980,12 +7012,12 @@ Antworten Sie mit "Ja", um FreeCAD den automatischen Download der Bibliotheken z Wähle ein Zeichnungsobjekt zum Bearbeiten aus - + No edit point found for selected object Kein Bearbeitungspunkt für ausgewählte Objekte gefunden - + : this object is not editable : dieses Objekt kann nicht bearbeitet werden @@ -7067,7 +7099,7 @@ Antworten Sie mit "Ja", um FreeCAD den automatischen Download der Bibliotheken z Spline has been closed - Polygonzug wurde geschlossen + Spline wurde geschlossen @@ -7422,7 +7454,7 @@ Nicht verfügbar, wenn die Option "Primitive Teile verwenden" aktiviert istKann Objekte nicht skalieren: - + Too many objects selected, max number set to: Zu viele Objekte ausgewählt, Maximalzahl gesetzt auf: diff --git a/src/Mod/Draft/Resources/translations/Draft_el.qm b/src/Mod/Draft/Resources/translations/Draft_el.qm index 27dba50a7c..533b9a813a 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_el.qm and b/src/Mod/Draft/Resources/translations/Draft_el.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_el.ts b/src/Mod/Draft/Resources/translations/Draft_el.ts index ac0103e257..8df1e61354 100644 --- a/src/Mod/Draft/Resources/translations/Draft_el.ts +++ b/src/Mod/Draft/Resources/translations/Draft_el.ts @@ -568,61 +568,40 @@ This property is read-only, as the number depends on the points contained within Parameterization factor - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Εμφανίστε τις κρυφές γραμμές - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments - - - - If this is True, this object will be recomputed only if it is - visible - If this is True, this object will be recomputed only if it is - visible - Start angle of the elliptical arc @@ -1024,62 +1003,62 @@ beyond the dimension line The line color of the objects contained within this layer, when used on a TechDraw page - + Line width Πλάτος γραμμής - + Line color Χρώμα γραμμής - + The size of the text The size of the text - + The font of the text The font of the text - + The vertical alignment of the text The vertical alignment of the text - + Text color Χρώμα κειμένου - + Line spacing (relative to font size) Line spacing (relative to font size) - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The size of the arrow The size of the arrow - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Display a leader line or not Display a leader line or not @@ -1113,10 +1092,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1641,27 +1651,27 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Warning @@ -3752,20 +3762,40 @@ value by using the [ and ] keys while drawing Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Επιλεγμένα - + Texts/dims Texts/dims + + + Text spacing + Αποστάσεις κειμένου + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Διάστιχο γραμμής + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -7003,12 +7033,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7446,7 +7476,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.qm b/src/Mod/Draft/Resources/translations/Draft_es-ES.qm index 37765d2f96..c34eb4f5f9 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_es-ES.qm and b/src/Mod/Draft/Resources/translations/Draft_es-ES.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts index 95afef93f3..b9739d018d 100644 --- a/src/Mod/Draft/Resources/translations/Draft_es-ES.ts +++ b/src/Mod/Draft/Resources/translations/Draft_es-ES.ts @@ -568,61 +568,40 @@ Esta propiedad es de solo lectura, así que el número depende de los puntos con Factor de parametrización - + The base object this 2D view must represent El objeto que esta vista 2D debe representar - + The projection vector of this object El vector de proyección de este objeto - + The way the viewed object must be projected La forma en que el objeto visto debe ser proyectado - + The indices of the faces to be projected in Individual Faces mode Los índices de las caras a proyectar en el modo Caras Individuales - + Show hidden lines Mostrar líneas ocultas - + Fuse wall and structure objects of same type and material Fusionar muro y objetos de estructura de mismo tipo y material - + Tessellate Ellipses and B-splines into line segments Mosaicos de elipses y spolilíneas-B en segmentos de líneas - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - Para los modos Cortalíneas y Cortacaras, - deja las caras en la ubicación de corte - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - La longitud de los segmentos de línea resultantes de mosaicos de elipses o spolilíneas - en segmentos de línea - - - - If this is True, this object will be recomputed only if it is - visible - Si es Verdadero, este objeto será recalculado solo si está - visible - Start angle of the elliptical arc @@ -1024,62 +1003,62 @@ más allá de la línea de dimensión El color de línea de los objetos contenidos en esta capa, cuando se usa en una página de TechDraw - + Line width Ancho de la línea - + Line color Color de línea - + The size of the text El tamaño del texto - + The font of the text El tipo de letra del texto - + The vertical alignment of the text La alineación vertical del texto - + Text color Color del texto - + Line spacing (relative to font size) Interlineado (en relación con el tamaño de fuente) - + The maximum number of characters on each line of the text box El número máximo de caracteres en cada línea del cuadro de texto - + The size of the arrow El tamaño de la flecha - + The type of arrow of this label El tipo de flecha de esta etiqueta - + The type of frame around the text of this object El tipo de marco que rodea el texto de este objeto - + Display a leader line or not Mostrar una línea directriz o no @@ -1113,10 +1092,41 @@ Dejar en blanco para el valor predeterminado del sistema. Utilice 'arch' para forzar notación de arco de Estados Unidos - + A list of exclusion points. Any edge touching any of those points will not be drawn. Una lista de puntos de exclusión. No se trazará cualquier borde que toque alguno de esos puntos. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1641,27 +1651,27 @@ La matriz puede convertirse en una matriz polar o circular cambiando su tipo.La dirección del desplazamiento no está definida. Por favor, mueva el ratón a cada lado del objeto primero para indicar una dirección - + Save style Guardar estilo - + Name of this new style: Nombre de este nuevo estilo: - + Name exists. Overwrite? El nombre existe. ¿Sobrescribir? - + Error: json module not found. Unable to save style Error: módulo json no encontrado. Incapaz de guardar el estilo - + Warning Aviso @@ -3751,20 +3761,40 @@ usando las teclas [ y ] mientras dibuja Guardar el estilo actual como preajuste... - + Apply above style to selected object(s) Aplicar el estilo superior al objeto(s) seleccionado - + Selected Seleccionado - + Texts/dims Textos/dimensiones + + + Text spacing + Espaciado de texto + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Espacio entre líneas + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -6995,12 +7025,12 @@ Para habilitar a FreeCAD la descarga de estas bibliotecas, responder Si.Seleccione un objeto Borrador para editar - + No edit point found for selected object No se encontró ningún punto de edición para el objeto seleccionado - + : this object is not editable : este objeto no es editable @@ -7437,7 +7467,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledNo se puede escalar objetos: - + Too many objects selected, max number set to: Demasiados objetos seleccionados, número máximo establecido en: diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.qm b/src/Mod/Draft/Resources/translations/Draft_eu.qm index 947d401565..c0711e18ae 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_eu.qm and b/src/Mod/Draft/Resources/translations/Draft_eu.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_eu.ts b/src/Mod/Draft/Resources/translations/Draft_eu.ts index e157d2097d..845e28bc48 100644 --- a/src/Mod/Draft/Resources/translations/Draft_eu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_eu.ts @@ -566,61 +566,40 @@ Propietate hau irakurtzeko soilik da, kopuru hori 'Puntu-objektua' elementuak di Parametrizazio-faktorea - + The base object this 2D view must represent 2D bista honek irudikatu behar duen oinarri-objektua - + The projection vector of this object Objektu honen proiekzio-bektorea - + The way the viewed object must be projected Bistaratutako objektua nola proiektatu behar den - + The indices of the faces to be projected in Individual Faces mode Banakako aurpegien moduan proiektatuko diren aurpegien indizeak - + Show hidden lines Erakutsi ezkutuko lerroak - + Fuse wall and structure objects of same type and material Fusionatu mota eta material bereko hormak eta egiturak - + Tessellate Ellipses and B-splines into line segments Teselatu elipseak eta B-spline elementuak lerro-segmentuetara - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - Mozketa-lerroen eta mozketa-aurpegien moduetarako, - honek mozketa-tokian uzten ditu aurpegiak - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Lerro-segmentuen luzera, elipseak edo B-spline kurbak - lerro-segmentuetara teselatzen badira - - - - If this is True, this object will be recomputed only if it is - visible - Hau egia bada, objektu hau birkalkulatuko da - ikusgai badago soilik - Start angle of the elliptical arc @@ -1021,62 +1000,62 @@ haratago duen luzera Geruza honetako objektuen lerro-kolorea, TechDraw orri batean daudenean - + Line width Lerro-zabalera - + Line color Lerro-kolorea - + The size of the text Testuaren tamaina - + The font of the text Testuaren letra-tipoa - + The vertical alignment of the text Testuaren lerrokatze bertikala - + Text color Testu-kolorea - + Line spacing (relative to font size) Lerroartea (letra-tipoarekiko) - + The maximum number of characters on each line of the text box Textu-kutxako lerro bakoitzaren karaktere kopuru maximoa - + The size of the arrow Geziaren tamaina - + The type of arrow of this label Etiketa honen gezi mota - + The type of frame around the text of this object Objektu honen testuaren inguruko marko mota - + Display a leader line or not Bistaratu gida-marra bat edo ez @@ -1110,10 +1089,41 @@ Utzi hutsik sistemaren unitate lehenetsia erabiltzeko. Erabili 'arch' US arku-notazioa behartzeko. - + A list of exclusion points. Any edge touching any of those points will not be drawn. Esklusio-puntuen zerrenda bat. Puntu horietako edozein ukitzen duten ertzak ez dira marraztuko. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1638,27 +1648,27 @@ Matrizearen mota aldatu daiteke, polarra edo zirkularra izan dadin.Desplazamenduaren norabidea ez dago definituta. Eraman sagua objektuaren aldeetako batera, norabide bat adierazteko - + Save style Gorde estiloa - + Name of this new style: Estilo berriaren izena: - + Name exists. Overwrite? Izena badago lehendik. Gainidatzi? - + Error: json module not found. Unable to save style Errorea: Ez da aurkitu JSON modulua. Ezin izan da estiloa gorde - + Warning Abisua @@ -3743,20 +3753,40 @@ value by using the [ and ] keys while drawing Gorde uneko estiloa aurrezarpen gisa... - + Apply above style to selected object(s) Aplikatu goiko estiloa hautatutako objektuei - + Selected Hautatua - + Texts/dims Testuak/kotak + + + Text spacing + Testu-tartea + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Lerro-tartea + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -6989,12 +7019,12 @@ FreeCADek liburutegi horiek deskarga ditzan gaitzeko, erantzun 'Bai'.Hautatu zirriborro-objektu bat, hura editatzeko - + No edit point found for selected object Ez da edizio-punturik aurkitu hautatutako objekturako - + : this object is not editable : objektu hau ezin da editatu @@ -7432,7 +7462,7 @@ Ez dago erabilgarri zirriborroen 'Erabili piezen jatorrizkoak' aukera gaituta ba Ezin dira objektuak eskalatu: - + Too many objects selected, max number set to: Objektu gehiegi dago hautatuta, kopuru maximoa honakoa izango da: diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.qm b/src/Mod/Draft/Resources/translations/Draft_fi.qm index ee4e9481ca..2245bc7322 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fi.qm and b/src/Mod/Draft/Resources/translations/Draft_fi.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fi.ts b/src/Mod/Draft/Resources/translations/Draft_fi.ts index db7fbd5503..9a18cc6048 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fi.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fi.ts @@ -558,61 +558,40 @@ This property is read-only, as the number depends on the points contained within Parameterization factor - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Näytä piilotetut viivat - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments - - - - If this is True, this object will be recomputed only if it is - visible - If this is True, this object will be recomputed only if it is - visible - Start angle of the elliptical arc @@ -1014,62 +993,62 @@ mittajanan jälkeen Tämän kerroksen sisältämien objektien viivan väri, kun sitä käytetään TechDraw sivulla - + Line width Viivan leveys - + Line color Viivan väri - + The size of the text Tekstin koko - + The font of the text Tekstin kirjasin (font) - + The vertical alignment of the text Tekstin pystysuuntainen tasaus - + Text color Tekstin väri - + Line spacing (relative to font size) Riviväli (suhteessa fontin kokoon) - + The maximum number of characters on each line of the text box Merkkien enimmäislukumäärä tekstin laatikon jokaisella rivillä - + The size of the arrow Nuolen koko - + The type of arrow of this label Tämän etiketin nuolen tyyppi - + The type of frame around the text of this object Tämän objektin tekstin ympärillä olevan kehyksen tyyppi - + Display a leader line or not Näytä johtolinja tai ei @@ -1103,10 +1082,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1631,27 +1641,27 @@ The array can be turned into a polar or a circular array by changing its type.Siirtymän suuntaa ei ole määritelty. Ole hyvä ja siirrä hiirtä objektin jommalle kummalle puolelle osoittaaksesi ensin suunnan - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Warning @@ -3744,20 +3754,40 @@ value by using the [ and ] keys while drawing Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Valitut - + Texts/dims Texts/dims + + + Text spacing + Text spacing + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Riviväli + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -6993,12 +7023,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7436,7 +7466,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_fil.qm b/src/Mod/Draft/Resources/translations/Draft_fil.qm index 114d59a50a..fe7062f257 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fil.qm and b/src/Mod/Draft/Resources/translations/Draft_fil.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fil.ts b/src/Mod/Draft/Resources/translations/Draft_fil.ts index ccdca3caae..a7865160fe 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fil.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fil.ts @@ -568,61 +568,40 @@ This property is read-only, as the number depends on the points contained within Parameterization factor - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Ipakita ang mga nakatagong mga linya - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments - - - - If this is True, this object will be recomputed only if it is - visible - If this is True, this object will be recomputed only if it is - visible - Start angle of the elliptical arc @@ -1024,62 +1003,62 @@ beyond the dimension line The line color of the objects contained within this layer, when used on a TechDraw page - + Line width Lapad ng linya - + Line color Kulay ng linya - + The size of the text The size of the text - + The font of the text The font of the text - + The vertical alignment of the text The vertical alignment of the text - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The size of the arrow The size of the arrow - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Display a leader line or not Display a leader line or not @@ -1113,10 +1092,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1641,27 +1651,27 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Warning @@ -3755,20 +3765,40 @@ value by using the [ and ] keys while drawing Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Napili - + Texts/dims Texts/dims + + + Text spacing + Espasyo ng teksto + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Line spacing + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -7008,12 +7038,12 @@ Upang ma-enable ang FreeCAD upang kupyahin ang mga aklatang ito, sagutin ang Oo. Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7451,7 +7481,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.qm b/src/Mod/Draft/Resources/translations/Draft_fr.qm index d9181f0e36..05b58b6315 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_fr.qm and b/src/Mod/Draft/Resources/translations/Draft_fr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_fr.ts b/src/Mod/Draft/Resources/translations/Draft_fr.ts index 08304d43ab..8ec099cdce 100644 --- a/src/Mod/Draft/Resources/translations/Draft_fr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_fr.ts @@ -563,61 +563,40 @@ Cette propriété est en lecture seule, car le nombre dépend des points contenu Facteur de paramétrage - + The base object this 2D view must represent L’objet de base que cette vue 2D doit représenter - + The projection vector of this object Le vecteur de projection de cet objet - + The way the viewed object must be projected La façon dont l’objet vu doit être projeté - + The indices of the faces to be projected in Individual Faces mode Les indices des faces à projeter en mode Faces individuelles - + Show hidden lines Afficher les lignes masquées - + Fuse wall and structure objects of same type and material Fusionner les objets mur et structure de même type et matériau - + Tessellate Ellipses and B-splines into line segments Approximer les ellipses et les courbes B-splines par des segments de ligne - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - En mode Cutlines ou Cutfaces, - cela laisse les faces à la position de la coupe - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Longueur des segments de ligne si approximation des ellipses ou des courbes B-splines - par des segments de ligne - - - - If this is True, this object will be recomputed only if it is - visible - Si Vrai, cet objet ne sera recalculé que s'il est - visible - Start angle of the elliptical arc @@ -1017,62 +996,62 @@ au-delà de la ligne de cote La couleur de trait des objets contenus dans ce calque, lorsqu'elle est utilisée sur une page TechDraw - + Line width Largeur de ligne - + Line color Couleur de ligne - + The size of the text La taille du texte - + The font of the text La police de caractère du texte - + The vertical alignment of the text L'alignement vertical du texte - + Text color Couleur du texte - + Line spacing (relative to font size) Interligne (par rapport à la taille de police) - + The maximum number of characters on each line of the text box Le nombre maximum de caractères de chaque ligne de la zone de texte - + The size of the arrow Taille de la flèche - + The type of arrow of this label Le type de flèche de cette étiquette - + The type of frame around the text of this object Le type de cadre autour du texte de cet objet - + Display a leader line or not Afficher une ligne de repère ou non @@ -1106,10 +1085,41 @@ Laisser vide pour la valeur par défaut du système. Utilisez 'arch' pour forcer la notation architecturale US - + A list of exclusion points. Any edge touching any of those points will not be drawn. Liste de points d’exclusion. Une arête touchant l’un de ces points ne sera pas dessinée. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1632,27 +1642,27 @@ Le réseau peut être transformé en réseau polaire ou circulaire en changeant La direction de décalage n'est pas définie. Veuillez d'abord déplacer la souris de chaque côté de l'objet pour indiquer une direction - + Save style Sauvegarder le style - + Name of this new style: Nom de ce nouveau style : - + Name exists. Overwrite? Le nom existe déjà. Remplacer ? - + Error: json module not found. Unable to save style Erreur : module json introuvable. Impossible d'enregistrer le style - + Warning Attention @@ -3743,20 +3753,40 @@ en utilisant les touches [ et ] lors du dessin Enregistrer le style actuel en tant que préréglage ... - + Apply above style to selected object(s) Appliquer le style ci-dessus aux objets sélectionnés - + Selected Sélection - + Texts/dims Textes / cotes + + + Text spacing + Espacement de texte + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Espacement des lignes + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -6983,12 +7013,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Sélectionner un objet Ébauche à modifier - + No edit point found for selected object Aucun point d'édition trouvé pour l'objet sélectionné - + : this object is not editable : cet objet n'est pas modifiable @@ -7425,7 +7455,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledImpossible de mettre les objets à l'échelle : - + Too many objects selected, max number set to: Trop d'objets sélectionnés, le nombre maximum est de : diff --git a/src/Mod/Draft/Resources/translations/Draft_gl.qm b/src/Mod/Draft/Resources/translations/Draft_gl.qm index c81a4b4edc..bc004a6358 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_gl.qm and b/src/Mod/Draft/Resources/translations/Draft_gl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_gl.ts b/src/Mod/Draft/Resources/translations/Draft_gl.ts index 23e9ba7b23..e8891d817c 100644 --- a/src/Mod/Draft/Resources/translations/Draft_gl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_gl.ts @@ -568,61 +568,40 @@ This property is read-only, as the number depends on the points contained within Parameterization factor - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Amosar liñas ocultas - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments - - - - If this is True, this object will be recomputed only if it is - visible - If this is True, this object will be recomputed only if it is - visible - Start angle of the elliptical arc @@ -1024,62 +1003,62 @@ beyond the dimension line The line color of the objects contained within this layer, when used on a TechDraw page - + Line width Largura da liña - + Line color Cor de liña - + The size of the text The size of the text - + The font of the text The font of the text - + The vertical alignment of the text The vertical alignment of the text - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The size of the arrow The size of the arrow - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Display a leader line or not Display a leader line or not @@ -1113,10 +1092,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1641,27 +1651,27 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Warning @@ -3754,20 +3764,40 @@ value by using the [ and ] keys while drawing Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Escolmado - + Texts/dims Texts/dims + + + Text spacing + Espazado de texto + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Line spacing + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -7001,12 +7031,12 @@ Para permitir o FreeCAD a descarga destas bibliotecas, responda Si.Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7444,7 +7474,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.qm b/src/Mod/Draft/Resources/translations/Draft_hr.qm index 214b7d26f1..f1e746beae 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_hr.qm and b/src/Mod/Draft/Resources/translations/Draft_hr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_hr.ts b/src/Mod/Draft/Resources/translations/Draft_hr.ts index 0540676b51..522ae41739 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hr.ts @@ -567,58 +567,40 @@ This property is read-only, as the number depends on the points contained within Faktor Parametriranja - + The base object this 2D view must represent Osnovni objekt 2D prikaza mora predstavljati - + The projection vector of this object Projekcijski vektor ovog objekta - + The way the viewed object must be projected Način na koji objekt pregleda mora biti projiciran - + The indices of the faces to be projected in Individual Faces mode Indeksi lica će biti projicirani u načinu rada pojedinih lica - + Show hidden lines Prikaži skrivene linije - + Fuse wall and structure objects of same type and material Spoji zid i objekte strukture ako su istog tipa i materijala - + Tessellate Ellipses and B-splines into line segments Razlaganje elipsa i B-krivulja u linijske segmente - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - Za modalna linijska rezanja i rezanja lica, to ostavlja lica na mjestu reza - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Dužine segmenta linija ako su presječene elipse ili B-krive u segmentima linija - - - - If this is True, this object will be recomputed only if it is - visible - Ako je ovo istina, ovaj objekt se preraučna samo ako je vidljiv - Start angle of the elliptical arc @@ -1020,62 +1002,62 @@ izvan mjerne linije Boja linija objekata sadržanih u ovom sloju kada se koristi stranica za TehničkoCrtanje - + Line width Širina linije - + Line color Boja linije - + The size of the text Veličina teksta - + The font of the text Vrsta pisma teksta - + The vertical alignment of the text Okomito poravnanje teksta - + Text color Boja teksta - + Line spacing (relative to font size) Razmak između redaka (u odnosu na veličinu fonta) - + The maximum number of characters on each line of the text box Maksimalni broj znakova u svakom retku tekstnog okvira - + The size of the arrow Veličina strelice - + The type of arrow of this label Vrsta strelice za ovu oznaku - + The type of frame around the text of this object Vrsta okvira oko teksta ovog objekta - + Display a leader line or not Display a leader line or not @@ -1109,10 +1091,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1655,27 +1668,27 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - + Save style Spremanje stilova - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Upozorenje @@ -3795,20 +3808,40 @@ tijekom crtanja pomoću tipki [i] Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Odabrano - + Texts/dims Texts/dims + + + Text spacing + Razmak teksta + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Razmak između redova + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -7069,12 +7102,12 @@ Da bi odobrio FreeCAD-u preuzimanje ove biblioteke, odgovori sa Da (Yes).Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7512,7 +7545,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.qm b/src/Mod/Draft/Resources/translations/Draft_hu.qm index a79108ec53..a3c988f8e1 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_hu.qm and b/src/Mod/Draft/Resources/translations/Draft_hu.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_hu.ts b/src/Mod/Draft/Resources/translations/Draft_hu.ts index 67653e6149..b7cdca1136 100644 --- a/src/Mod/Draft/Resources/translations/Draft_hu.ts +++ b/src/Mod/Draft/Resources/translations/Draft_hu.ts @@ -566,61 +566,40 @@ Ez a tulajdonság csak olvasható, mert a szám a 'Pont tárgy' pontjaitól füg Paraméterezés tényező - + The base object this 2D view must represent Az alap tárgyat ennek a 2D nézetnek kell képviselnie - + The projection vector of this object Ennek a tárgynak a vetítési vektora - + The way the viewed object must be projected A megtekintett tárgy vetítésének az útja - + The indices of the faces to be projected in Individual Faces mode A mutatott felületek vetítése az Egyéni felület módban - + Show hidden lines Mutassa a rejtett vonalakat - + Fuse wall and structure objects of same type and material Ugyanazon típusú anyagból készült fal és építő elemeket olvaszt egybe - + Tessellate Ellipses and B-splines into line segments Mozaikos ellipsziseket és B-Görbéket vonalszakaszokba - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - Szakaszvonal- és szakaszfelületi üzemmódoknál - ez a felületeket vágási helyzetben hagyja - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - A vonalszakaszok hossza ellipszisek vagy B-görbék után - vonalszakaszokká alakítható - - - - If this is True, this object will be recomputed only if it is - visible - Ha ez igaz, a cél csak akkor kerül újraszámításra, ha - látható - Start angle of the elliptical arc @@ -1022,62 +1001,62 @@ a méretvonalon túl A rétegen belüli tárgyak vonalszíne, ha MűszakiRajz oldalon használják - + Line width Vonalvastagság - + Line color Vonalszín - + The size of the text A szöveg mérete - + The font of the text A szöveg betütípusa - + The vertical alignment of the text A szöveg függőleges igazítása - + Text color Szöveg szín - + Line spacing (relative to font size) Egyenes illesztés (relatív a betűméretehez) - + The maximum number of characters on each line of the text box A szöveg doboz soronkénti karaktereinek maximális száma - + The size of the arrow A nyíl mérete - + The type of arrow of this label Ennek a címkének a nyíl típusa - + The type of frame around the text of this object Az tárgy szövege körüli keret típusa - + Display a leader line or not Vezéregyenes mutatása vagy elrejtése @@ -1111,10 +1090,41 @@ Hagyja üresen a rendszer alapértelmezetthez. Használja az 'arch' kifejezést amerikai US arch jelölésének kikényszerítésére - + A list of exclusion points. Any edge touching any of those points will not be drawn. A kizárási pontok listája. A pontok bármelyikét érintő élek nem kerülnek kisorsolásra. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1639,27 +1649,27 @@ Az elrendezés merőleges vagy poláris elrendezésre alakítható a típus megv Az eltolás iránya nem meghatérozott. Először mozgassa az egeret a tárgy egyik oldalára, hogy meghatározza az irányt - + Save style Stílus mentése - + Name of this new style: Az új stílus neve: - + Name exists. Overwrite? A név már létezik. Felülírjuk? - + Error: json module not found. Unable to save style Hiba: a json modul nem található. A stílus mentése sikertelen - + Warning Riasztás @@ -3749,20 +3759,40 @@ módosíthatja rajzolás közben Mentse az aktuális stílust előre beállítottként... - + Apply above style to selected object(s) A fenti stílus alkalmazása kijelölt tárgy(ak)ra - + Selected Kiválasztott - + Texts/dims Szöveg / méretek + + + Text spacing + Szövegtérköz + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Sorköz + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -7001,12 +7031,12 @@ A FreeCAD letöltésének bekapcsolásához válassza az "Igen"-t. Szerkesztéshez tervrajz tárgyat választ - + No edit point found for selected object A kijelölt tárgyhoz nem található szerkesztési pont - + : this object is not editable : ez a tárgy nem szerkeszthető @@ -7444,7 +7474,7 @@ Nem érhető el, ha a 'Rész-primitívek használata' beállítás engedélyezve A tárgyak méretezése sikertelen: - + Too many objects selected, max number set to: Túl sok tárgy van kijelölve, a beállított maximális szám: diff --git a/src/Mod/Draft/Resources/translations/Draft_id.qm b/src/Mod/Draft/Resources/translations/Draft_id.qm index e7118eb477..0caee94bff 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_id.qm and b/src/Mod/Draft/Resources/translations/Draft_id.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_id.ts b/src/Mod/Draft/Resources/translations/Draft_id.ts index 69d849be43..c6dd33442f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_id.ts +++ b/src/Mod/Draft/Resources/translations/Draft_id.ts @@ -568,61 +568,40 @@ This property is read-only, as the number depends on the points contained within Parameterization factor - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Tampilkan garis tersembunyi - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments - - - - If this is True, this object will be recomputed only if it is - visible - If this is True, this object will be recomputed only if it is - visible - Start angle of the elliptical arc @@ -1024,62 +1003,62 @@ beyond the dimension line The line color of the objects contained within this layer, when used on a TechDraw page - + Line width Lebar garis - + Line color Line warna - + The size of the text The size of the text - + The font of the text The font of the text - + The vertical alignment of the text The vertical alignment of the text - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The size of the arrow The size of the arrow - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Display a leader line or not Display a leader line or not @@ -1113,10 +1092,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1639,27 +1649,27 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Warning @@ -3752,20 +3762,40 @@ value by using the [ and ] keys while drawing Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Terpilih - + Texts/dims Texts/dims + + + Text spacing + Jarak teks + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Jarak baris + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -6996,12 +7026,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7439,7 +7469,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_it.qm b/src/Mod/Draft/Resources/translations/Draft_it.qm index a7df2ed1d4..6d163f7692 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_it.qm and b/src/Mod/Draft/Resources/translations/Draft_it.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_it.ts b/src/Mod/Draft/Resources/translations/Draft_it.ts index d7d6f19ce3..664a5a4cde 100644 --- a/src/Mod/Draft/Resources/translations/Draft_it.ts +++ b/src/Mod/Draft/Resources/translations/Draft_it.ts @@ -560,60 +560,40 @@ Questa proprietà è di sola lettura, poiché il numero dipende dai punti conten Fattore di parametrizzazione - + The base object this 2D view must represent L'oggetto di base che questa vista 2D deve rappresentare - + The projection vector of this object Il vettore di proiezione di questo oggetto - + The way the viewed object must be projected Il modo in cui l'oggetto osservato deve essere proiettato - + The indices of the faces to be projected in Individual Faces mode Gli indici delle facce da proiettare in modalità Facce singole - + Show hidden lines Visualizza le linee nascoste - + Fuse wall and structure objects of same type and material Fusione delle pareti e degli oggetti della struttura dello stesso tipo e materiale - + Tessellate Ellipses and B-splines into line segments Tessellare ellissi e B-spline in segmenti di linea - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - Per le modalità Cutlines e Cutfaces, - questo lascia le facce nella posizione di taglio - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Lunghezza dei segmenti di linea per tessellare ellissi o B-spline - - - - If this is True, this object will be recomputed only if it is - visible - Se questo è vero, questo oggetto sarà ricalcolato solo se è - visibile - Start angle of the elliptical arc @@ -1013,62 +993,62 @@ beyond the dimension line Il colore della riga degli oggetti contenuti in questo layer, quando usato in una pagina TechDraw - + Line width Spessore linea - + Line color Colore della linea - + The size of the text Dimensione del testo - + The font of the text Il carattere del testo - + The vertical alignment of the text L'allineamento verticale del testo - + Text color Colore testo - + Line spacing (relative to font size) Interlinea (relativo alla dimensione del carattere) - + The maximum number of characters on each line of the text box Il numero massimo di caratteri in ogni riga della casella di testo - + The size of the arrow La dimensione della freccia - + The type of arrow of this label Il tipo di freccia di questa etichetta - + The type of frame around the text of this object Il tipo di cornice attorno al testo di questo oggetto - + Display a leader line or not Visualizza linee guida o no @@ -1102,10 +1082,41 @@ Lasciare vuoto per il sistema predefinito. Usare 'arch' per forzare la notazione dell'arco statunitense - + A list of exclusion points. Any edge touching any of those points will not be drawn. Un elenco di punti di esclusione. Qualsiasi bordo che tocca uno di questi punti non sarà disegnato. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1630,27 +1641,27 @@ La Serie può essere trasformata in una serie polare o circolare cambiandone il La direzione di Offset non è definita. Si prega di spostare il mouse su entrambi i lati dell'oggetto prima per indicare una direzione - + Save style Salva stile - + Name of this new style: Nome di questo nuovo stile: - + Name exists. Overwrite? Il nome esiste. Sovrascrivere? - + Error: json module not found. Unable to save style Errore: modulo json non trovato. Impossibile salvare lo stile - + Warning Warning @@ -3742,20 +3753,40 @@ utilizzando i tasti [ e ] durante il disegno Salva lo stile corrente come preimpostato... - + Apply above style to selected object(s) Applica lo stile sopra agli oggetti selezionati - + Selected Selezionato - + Texts/dims Testi/quote + + + Text spacing + Spaziatura del testo + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Interlinea + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -6989,12 +7020,12 @@ Per abilitare FreeCAD a scaricare queste librerie, rispondere Sì.Selezionare un oggetto Draft da modificare - + No edit point found for selected object Nessun punto di modifica trovato per l'oggetto selezionato - + : this object is not editable : questo oggetto non è modificabile @@ -7431,7 +7462,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledImpossibile scalare gli oggetti: - + Too many objects selected, max number set to: Troppi oggetti selezionati, numero massimo impostato a: diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.qm b/src/Mod/Draft/Resources/translations/Draft_ja.qm index 328a025531..170ad61047 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ja.qm and b/src/Mod/Draft/Resources/translations/Draft_ja.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ja.ts b/src/Mod/Draft/Resources/translations/Draft_ja.ts index 51871ecbbd..f971aca6e7 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ja.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ja.ts @@ -556,58 +556,40 @@ This property is read-only, as the number depends on the points contained within パラメーター化係数 - + The base object this 2D view must represent この2Dビューが表現する必要のあるベースオブジェクト - + The projection vector of this object このオブジェクトの投影ベクトル - + The way the viewed object must be projected 表示オブジェクトの投影方向 - + The indices of the faces to be projected in Individual Faces mode 個別面モードで投影される面のインデックス - + Show hidden lines 隠線を表示 - + Fuse wall and structure objects of same type and material 壁と構造物を同じ種類と材質に融合 - + Tessellate Ellipses and B-splines into line segments 楕円、B-スプラインを線分に分割 - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - カットラインモード、カットフェイスモードでカット位置の面を残します。 - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - 楕円、B-スプラインを線分に分割する際の線分長さ - - - - If this is True, this object will be recomputed only if it is - visible - True の場合、このオブジェクトは表示されている場合にのみ再計算されます。 - Start angle of the elliptical arc @@ -1004,62 +986,62 @@ beyond the dimension line TechDraw ページで使用する場合の、このレイヤーに含まれるオブジェクトの線の色 - + Line width ライン幅 - + Line color 線の色 - + The size of the text テキストのサイズ - + The font of the text テキストのフォント - + The vertical alignment of the text テキストの垂直方向の位置 - + Text color テキストの色 - + Line spacing (relative to font size) 行間隔(フォント サイズに対する相対値) - + The maximum number of characters on each line of the text box テキストボックスの各行の最大文字数 - + The size of the arrow 矢印のサイズ - + The type of arrow of this label このラベルの矢印の種類 - + The type of frame around the text of this object このオブジェクトのテキストを囲む枠の種類 - + Display a leader line or not 引き出し線を表示するかどうか @@ -1093,10 +1075,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1618,27 +1631,27 @@ X、Y、Zの軸の指定方向にコピーを並べます。 オフセット方向が定義されていません。最初にオブジェクトのどちらか一方にマウスを動かして方向を指定してください。 - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning 警告 @@ -3713,20 +3726,40 @@ value by using the [ and ] keys while drawing Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected 選択 - + Texts/dims Texts/dims + + + Text spacing + テキストの間隔 + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + 行間 + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -6955,12 +6988,12 @@ FreeCADでこれらライブラリーのダウンロードを有効にするた 編集するDraftオブジェクトを選択 - + No edit point found for selected object 選択オブジェクトの中に編集点がありません。 - + : this object is not editable : このオブジェクトは編集できません @@ -7398,7 +7431,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_kab.qm b/src/Mod/Draft/Resources/translations/Draft_kab.qm index 87adcd635b..b5e1004937 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_kab.qm and b/src/Mod/Draft/Resources/translations/Draft_kab.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_kab.ts b/src/Mod/Draft/Resources/translations/Draft_kab.ts index 88e5a88e60..6ec5d224ed 100644 --- a/src/Mod/Draft/Resources/translations/Draft_kab.ts +++ b/src/Mod/Draft/Resources/translations/Draft_kab.ts @@ -568,61 +568,40 @@ This property is read-only, as the number depends on the points contained within Parameterization factor - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Afficher les lignes masquées - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments - - - - If this is True, this object will be recomputed only if it is - visible - If this is True, this object will be recomputed only if it is - visible - Start angle of the elliptical arc @@ -1024,62 +1003,62 @@ beyond the dimension line The line color of the objects contained within this layer, when used on a TechDraw page - + Line width Largeur de ligne - + Line color Ini n yizirig - + The size of the text The size of the text - + The font of the text The font of the text - + The vertical alignment of the text The vertical alignment of the text - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The size of the arrow The size of the arrow - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Display a leader line or not Display a leader line or not @@ -1113,10 +1092,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1641,27 +1651,27 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Warning @@ -3754,20 +3764,40 @@ value by using the [ and ] keys while drawing Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Selected - + Texts/dims Texts/dims + + + Text spacing + Espacement de texte + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Line spacing + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -7006,12 +7036,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7449,7 +7479,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_ko.qm b/src/Mod/Draft/Resources/translations/Draft_ko.qm index fc5de3afa7..e04e32b4c6 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ko.qm and b/src/Mod/Draft/Resources/translations/Draft_ko.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ko.ts b/src/Mod/Draft/Resources/translations/Draft_ko.ts index 36b73174e9..c98afc95d1 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ko.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ko.ts @@ -568,61 +568,40 @@ This property is read-only, as the number depends on the points contained within Parameterization factor - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines 히든라인 보기 - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments - - - - If this is True, this object will be recomputed only if it is - visible - If this is True, this object will be recomputed only if it is - visible - Start angle of the elliptical arc @@ -1024,62 +1003,62 @@ beyond the dimension line The line color of the objects contained within this layer, when used on a TechDraw page - + Line width 선 두께 - + Line color 선 색 - + The size of the text The size of the text - + The font of the text The font of the text - + The vertical alignment of the text The vertical alignment of the text - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The size of the arrow The size of the arrow - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Display a leader line or not Display a leader line or not @@ -1113,10 +1092,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1641,27 +1651,27 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Warning @@ -3754,20 +3764,40 @@ value by using the [ and ] keys while drawing Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Selected - + Texts/dims Texts/dims + + + Text spacing + 문자 간격 + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Line spacing + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -7003,12 +7033,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7446,7 +7476,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_lt.qm b/src/Mod/Draft/Resources/translations/Draft_lt.qm index 90f4ec9bba..e4d57ce42d 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_lt.qm and b/src/Mod/Draft/Resources/translations/Draft_lt.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_lt.ts b/src/Mod/Draft/Resources/translations/Draft_lt.ts index 64a1c81500..4f41b71199 100644 --- a/src/Mod/Draft/Resources/translations/Draft_lt.ts +++ b/src/Mod/Draft/Resources/translations/Draft_lt.ts @@ -568,61 +568,40 @@ This property is read-only, as the number depends on the points contained within Parameterization factor - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Rodyti paslėptas linijas - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments - - - - If this is True, this object will be recomputed only if it is - visible - If this is True, this object will be recomputed only if it is - visible - Start angle of the elliptical arc @@ -1024,62 +1003,62 @@ beyond the dimension line The line color of the objects contained within this layer, when used on a TechDraw page - + Line width Linijos storis - + Line color Linijos spalva - + The size of the text The size of the text - + The font of the text The font of the text - + The vertical alignment of the text The vertical alignment of the text - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The size of the arrow The size of the arrow - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Display a leader line or not Display a leader line or not @@ -1113,10 +1092,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1640,27 +1650,27 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Warning @@ -3753,20 +3763,40 @@ value by using the [ and ] keys while drawing Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Pasirinktas - + Texts/dims Texts/dims + + + Text spacing + Rašmenų protarpis + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Line spacing + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -7005,12 +7035,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7448,7 +7478,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.qm b/src/Mod/Draft/Resources/translations/Draft_nl.qm index e3e95de79a..271587a65b 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_nl.qm and b/src/Mod/Draft/Resources/translations/Draft_nl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_nl.ts b/src/Mod/Draft/Resources/translations/Draft_nl.ts index b118df31c6..b6ea344d81 100644 --- a/src/Mod/Draft/Resources/translations/Draft_nl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_nl.ts @@ -565,61 +565,40 @@ Deze eigenschap is alleen-lezen, omdat het getal afhankelijk is van de punten in Parametrisatiefactor - + The base object this 2D view must represent Het basisobject dat deze 2D-weergave moet weergeven - + The projection vector of this object De vector projectie van dit object - + The way the viewed object must be projected De manier waarop die het weergegeven object moet worden geprojecteerd - + The indices of the faces to be projected in Individual Faces mode De indexen van de vlakken die geprojecteerd moeten worden in de individuele aanzichtmodus - + Show hidden lines Toon verborgen lijnen - + Fuse wall and structure objects of same type and material Verenig de muur en de structuurobjecten van hetzelfde type en hetzelfde materiaal - + Tessellate Ellipses and B-splines into line segments Ellipsen en B-splines in lijnsegmenten opsplitsen - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - Voor snijvlakken en kniplijnen modi, - laat dit de gezichten achter op de locatie die gesneden is - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Lengte van lijnsegmenten indien ellipsen of B-splines - in discrete lijnsegmenten worden omgezet - - - - If this is True, this object will be recomputed only if it is - visible - Als dit waar is, wordt dit object alleen opnieuw berekend als het - zichtbaar is - Start angle of the elliptical arc @@ -1021,62 +1000,62 @@ buiten de maatlijn De lijnkleur van de objecten die in deze laag zitten, wanneer gebruikt op een TechDraw pagina - + Line width Lijndikte - + Line color Lijnkleur - + The size of the text De grootte van de tekst - + The font of the text Het lettertype van de tekst - + The vertical alignment of the text De verticale uitlijning van de tekst - + Text color Tekst kleur - + Line spacing (relative to font size) Lijn afstand (ten opzichte van de lettergrootte) - + The maximum number of characters on each line of the text box Het maximum aantal tekens op elke regel van het tekstvak - + The size of the arrow De grootte van de pijl - + The type of arrow of this label Het pijltype van dit label - + The type of frame around the text of this object Het frametype rond de tekst van dit object - + Display a leader line or not Toon een leiderslijn of niet @@ -1110,10 +1089,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1638,27 +1648,27 @@ De reeks kan worden omgezet in een polair of een circulaire reeks door het type Offset richting is niet gedefinieerd. Beweeg de muis aan een van de zijden van het object eerst om een richting aan te geven - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Waarschuwing @@ -3749,20 +3759,40 @@ waarde ook wijzigen door de [ and ] sleutels te gebruiken tijdens het tekenenSave current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Geselecteerd - + Texts/dims Texts/dims + + + Text spacing + Tekstafstand + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Regelafstand + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -6998,12 +7028,12 @@ Om FreeCAD in staat te stellen om deze bibliotheken te downloaden, antwoord Ja.< Selecteer een Draftt object om te bewerken - + No edit point found for selected object Geen bewerkingspunt gevonden voor het geselecteerde object - + : this object is not editable : dit object is niet bewerkbaar @@ -7441,7 +7471,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_no.qm b/src/Mod/Draft/Resources/translations/Draft_no.qm index 2a27582fa3..89bffa2e31 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_no.qm and b/src/Mod/Draft/Resources/translations/Draft_no.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_no.ts b/src/Mod/Draft/Resources/translations/Draft_no.ts index c5531f5c8b..3b3267db5e 100644 --- a/src/Mod/Draft/Resources/translations/Draft_no.ts +++ b/src/Mod/Draft/Resources/translations/Draft_no.ts @@ -568,61 +568,40 @@ This property is read-only, as the number depends on the points contained within Parameterization factor - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Vis skjulte linjer - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments - - - - If this is True, this object will be recomputed only if it is - visible - If this is True, this object will be recomputed only if it is - visible - Start angle of the elliptical arc @@ -1024,62 +1003,62 @@ beyond the dimension line The line color of the objects contained within this layer, when used on a TechDraw page - + Line width Line width - + Line color Linjefarge - + The size of the text The size of the text - + The font of the text The font of the text - + The vertical alignment of the text The vertical alignment of the text - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The size of the arrow The size of the arrow - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Display a leader line or not Display a leader line or not @@ -1113,10 +1092,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1641,27 +1651,27 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Warning @@ -3754,20 +3764,40 @@ value by using the [ and ] keys while drawing Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Selected - + Texts/dims Texts/dims + + + Text spacing + Tekst mellomrom + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Linjeavstand + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -7003,12 +7033,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7446,7 +7476,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.qm b/src/Mod/Draft/Resources/translations/Draft_pl.qm index 52d9897c95..c98b9c6979 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pl.qm and b/src/Mod/Draft/Resources/translations/Draft_pl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pl.ts b/src/Mod/Draft/Resources/translations/Draft_pl.ts index c822c557db..17454ca7bf 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pl.ts @@ -118,12 +118,12 @@ Pozostaw tę właściwość pustą, aby móc ustawić " Oś" i "Środek" ręczni Distance between copies in the same circular layer - Odległość między kopiami w tej samej warstwie kołowej + Odległość między kopiami w tej samej warstwie szyku kołowego Number of circular layers. The 'Base' object counts as one layer. - Liczba warstw kołowych. Obiekt 'Baza' liczy się jako jedna warstwa. + Liczba warstw kołowych. Obiekt "Podstawowy" zalicza się jako jedna warstwa. @@ -566,60 +566,40 @@ Tą właściwość można tylko przeglądać, ponieważ ilość jest zależna od Współczynnik parametryzacji - + The base object this 2D view must represent Obiekt bazowy musi reprezentować widok 2D - + The projection vector of this object Wektor rzutowania tego obiektu - + The way the viewed object must be projected Sposób rzutowania oglądanego obiektu - + The indices of the faces to be projected in Individual Faces mode Wskaźniki powierzchni będą wyświetlane w trybie indywidualnych powierzchni - + Show hidden lines Pokaż ukryte linie - + Fuse wall and structure objects of same type and material Powiąż ścianę i obiekty struktury tego samego typu i materiału - + Tessellate Ellipses and B-splines into line segments Elipsy Mozaikowe i Krzywe B-sklejone w segmentach liniowych - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - W trybach Cutlines i Cutfaces - pozostawia ściany w miejscu cięcia - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Długość segmentów liniowych, jeśli mozaikowe elipsy lub krzywe B-sklejone są - w segmentach liniowych - - - - If this is True, this object will be recomputed only if it is - visible - Jeśli to jest Prawda, obiekt ten zostanie przeliczony tylko wtedy, gdy będzie widoczny - Start angle of the elliptical arc @@ -1018,62 +998,62 @@ beyond the dimension line Kolor linii obiektów znajdujących się w tej warstwie, gdy są używane na stronie TechDraw - + Line width Szerokość linii - + Line color Kolor linii - + The size of the text Rozmiar tekstu - + The font of the text Czcionka tekstu - + The vertical alignment of the text Wyrównanie tekstu w pionie - + Text color Kolor tekstu - + Line spacing (relative to font size) Odstęp między wierszami (w stosunku do rozmiaru czcionki) - + The maximum number of characters on each line of the text box Maksymalna liczba znaków w każdym wierszu pola tekstowego - + The size of the arrow Rozmiar strzałki - + The type of arrow of this label Typ strzałki tej etykiety - + The type of frame around the text of this object Typ ramki wokół tekstu tego obiektu - + Display a leader line or not Wyświetl lub ukryj linie odniesienia @@ -1107,10 +1087,41 @@ Pozostaw puste dla systemowych ustawień domyślnych.. Użyj "arch", aby wymusić notację architektoniczną amerykańską - + A list of exclusion points. Any edge touching any of those points will not be drawn. Lista punktów wykluczenia. Każda krawędź dotykająca któregokolwiek z tych punktów nie zostanie narysowana. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1367,8 +1378,9 @@ Użyj "arch", aby wymusić notację architektoniczną amerykańskąDownload of dxf libraries failed. Please install the dxf Library addon manually from menu Tools -> Addon Manager - Pobieranie biblioteki dxf nie powiodło się. -Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi menu -> menedżer dodadków + Pobieranie biblioteki DXF nie powiodło się. +Proszę zainstalować bibliotekę DXF ręcznie +z menu Przybory -> Menedżer dodatków @@ -1383,7 +1395,7 @@ Proszę zainstalować dodatek bibliotek dxf ręcznie z narzędzi menu -> mene Draft modification tools - Narzędzia do modyfikacji rysunku + Narzędzia do modyfikacji kreślarskich @@ -1634,27 +1646,27 @@ Tablicę można przekształcić w tablicę polarną lub okrągłą, zmieniając Kierunek przesunięcia nie jest zdefiniowany. Proszę najpierw przesunąć kursor myszki po obu stronach obiektu, aby wskazać kierunek - + Save style Zapisz styl - + Name of this new style: Nazwa nowego stylu: - + Name exists. Overwrite? Nazwa istnieje. Nadpisać? - + Error: json module not found. Unable to save style Błąd: nie znaleziono modułu json. Nie można zapisać stylu - + Warning Ostrzeżenie @@ -1713,7 +1725,7 @@ Działa to tylko wtedy, gdy opcja "Połącz tablicę" jest wyłączona. Fuse - Suma + Scalenie @@ -1832,7 +1844,7 @@ Działa to tylko wtedy, gdy opcja "Połącz tablicę" jest wyłączona. Fuse - Suma + Scalenie @@ -1955,7 +1967,7 @@ Działa to tylko wtedy, gdy opcja "Połącz tablicę" jest wyłączona. Fuse - Suma + Scalenie @@ -2383,7 +2395,7 @@ Jednak pojedynczy szkic z rozłączonymi elementami zostanie przekonwertowany na Drawing - Rysunek roboczy + Kreślenie @@ -3748,20 +3760,40 @@ używając klawisza [ i ] podczas rysowania Zapisz bieżący styl jako ustawienie wstępne ... - + Apply above style to selected object(s) Zastosuj powyższy styl do wybranych obiektów - + Selected Wybrane - + Texts/dims Tekst / wymiary + + + Text spacing + Odstępy w tekście + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Odstępy między wierszami + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -5204,7 +5236,7 @@ Uwaga: eksporter C++ jest szybszy, ale nie jest jeszcze tak funkcjonalny Draft Snap - Rysunek Roboczy przyciąganie + Rysunek Roboczy - przyciąganie @@ -6346,7 +6378,7 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Fuse: - Suma: + Scalenie: @@ -6999,12 +7031,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Wybierz obiekt rysunku roboczego do edycji - + No edit point found for selected object Nie znaleziono punktu edycji dla wybranego obiektu - + : this object is not editable : tego obiektu nie można edytować @@ -7442,7 +7474,7 @@ Niedostępne, jeśli opcja preferencji Rysunku Roboczego "używaj elementów pie Nie można skalować obiektów: - + Too many objects selected, max number set to: Wybrano zbyt wiele obiektów, maksymalna liczba została ustawiona na: diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm index 40498b7beb..cf143da735 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm and b/src/Mod/Draft/Resources/translations/Draft_pt-BR.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts index 9d9dcff7f3..4fe4c6a18f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-BR.ts @@ -567,58 +567,40 @@ Esta propriedade é somente leitura, já que o número depende dos outros parâm Fator de parametrização - + The base object this 2D view must represent O objeto base que esta vista 2D deve representar - + The projection vector of this object O vetor de projeção deste objeto - + The way the viewed object must be projected A maneira como o objeto visualizado deve ser projetada - + The indices of the faces to be projected in Individual Faces mode Os índices das faces a serem projetados no modo Individual Faces - + Show hidden lines Mostrar linhas ocultas - + Fuse wall and structure objects of same type and material Fusão de parede e estrutura do mesmo tipo e material - + Tessellate Ellipses and B-splines into line segments Tesselação de Elipses e Bsplines em segmentos de linha - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - Para os modos de CutLines e CutFaces, isto deixa as faces na localização de corte - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Comprimento de segmentos de linha se existir tesselação de Elipses ou Bsplines em segmentos de linha - - - - If this is True, this object will be recomputed only if it is - visible - Se isto for verdadeiro, esse objeto será ser recalculado somente se estiver visível - Start angle of the elliptical arc @@ -1015,62 +997,62 @@ beyond the dimension line A cor de linha dos objetos contidos nesta camada, quando mostrados em uma página TechDraw - + Line width Espessura de linha - + Line color Cor da linha - + The size of the text O tamanho do texto - + The font of the text A fonte do texto - + The vertical alignment of the text O alinhamento vertical do texto - + Text color Cor do texto - + Line spacing (relative to font size) Espaçamento entre linhas (em relação ao tamanho da fonte) - + The maximum number of characters on each line of the text box O número máximo de caracteres em cada linha da caixa de texto - + The size of the arrow O tamanho da seta - + The type of arrow of this label O tipo de seta deste rótulo - + The type of frame around the text of this object O tipo de quadro em torno do texto deste objeto - + Display a leader line or not Exibir uma linha de anotação ou não @@ -1104,10 +1086,41 @@ Deixe em branco para o padrão do sistema. Use 'arch' para forçar a notação de arco dos EUA - + A list of exclusion points. Any edge touching any of those points will not be drawn. Uma lista de pontos de exclusão. Qualquer aresta que toque em algum desses pontos não será desenhada. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1632,27 +1645,27 @@ A rede pode ser transformada em uma rede polar ou circular alterando seu tipo.Direção do deslocamento não definida. Por favor, mova o mouse de ambos os lados do objeto primeiro para indicar uma direção - + Save style Salvar estilos - + Name of this new style: Nome deste novo estilo: - + Name exists. Overwrite? Nome existente. Sobrescrever? - + Error: json module not found. Unable to save style Erro: módulo json não encontrado. Não foi possível salvar o estilo - + Warning Atenção @@ -3739,20 +3752,40 @@ usando as teclas [ and ] enquanto está desenhando Salvar estilo atual como perfil... - + Apply above style to selected object(s) Aplicar o estilo acima ao(s) objeto(s) selecionado(s) - + Selected Selecionado - + Texts/dims Textos/escurecimentos + + + Text spacing + Espaçamento do texto + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Espaçamento de linhas + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -6984,12 +7017,12 @@ Para habilitar o FreeCAD para fazer o download destas bibliotecas, responda Sim. Selecione um objeto Traço para editar - + No edit point found for selected object Nenhum ponto de edição encontrado para o objeto selecionado - + : this object is not editable : este objeto não é editável @@ -7425,7 +7458,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledNão é possível redimensionar objetos: - + Too many objects selected, max number set to: Muitos objetos selecionados, número máximo definido é: diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm b/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm index cecaea34ad..62fb014d25 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm and b/src/Mod/Draft/Resources/translations/Draft_pt-PT.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts index 1f27802040..6a4a801d9f 100644 --- a/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts +++ b/src/Mod/Draft/Resources/translations/Draft_pt-PT.ts @@ -566,61 +566,40 @@ Esta propriedade é apenas-de-leitura, já que o número depende dos pontos cont Fator de parametrização - + The base object this 2D view must represent O objeto base que esta vista 2D deve representar - + The projection vector of this object O vetor de projeção deste objeto - + The way the viewed object must be projected A maneira como o objeto visualizado deve ser projetado - + The indices of the faces to be projected in Individual Faces mode Os índices das faces a serem projetadas no modo Faces individuais - + Show hidden lines Mostrar linhas ocultas - + Fuse wall and structure objects of same type and material Fundir a parede com objetos da estrutura do mesmo tipo e material - + Tessellate Ellipses and B-splines into line segments Suavização de serrilhado em elipses e B-splines como segmentos de linha - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - Para os modos Cortarlinhas e Cortarfaces, - isto deixa as faces no local de corte - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Comprimento dos segmentos de linha se elipses ou Bsplines forem renderizadas - em segmentos de linha - - - - If this is True, this object will be recomputed only if it is - visible - Se verdadeiro, este objeto será recalculado somente se estiver - visível - Start angle of the elliptical arc @@ -1021,62 +1000,62 @@ além da linha de cota A cor da linha dos objetos contidos nesta camada, quando usados em uma página TechDraw - + Line width Largura da linha - + Line color Cor da linha - + The size of the text O tamanho do texto - + The font of the text O tipo de letra do texto - + The vertical alignment of the text O alinhamento vertical do texto - + Text color Cor do texto - + Line spacing (relative to font size) Espaçamento entre linhas (em relação ao tamanho da fonte) - + The maximum number of characters on each line of the text box O número máximo de caracteres em cada linha da caixa de texto - + The size of the arrow O tamanho da seta - + The type of arrow of this label O tipo de seta desta etiqueta - + The type of frame around the text of this object O tipo de moldura em torno do texto deste objeto - + Display a leader line or not Mostrar uma linha de chamada ou não @@ -1110,10 +1089,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. Uma lista de pontos de exclusão. Qualquer aresta que toque em qualquer um desses pontos não será desenhada. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1636,27 +1646,27 @@ A matriz pode ser transformada em polar numa matriz circular alterando seu tipo. Direção do deslocamento não definida. Por favor, mova o rato de ambos os lados do primeiro objeto para indicar uma direção - + Save style Guardar estilo - + Name of this new style: Nome deste novo estilo: - + Name exists. Overwrite? Nome já existe. Substituir? - + Error: json module not found. Unable to save style Erro: módulo json não encontrado. Não é possível salvar o estilo - + Warning Aviso @@ -3747,20 +3757,40 @@ value by using the [ and ] keys while drawing Guardar o estilo atual como pré-definido... - + Apply above style to selected object(s) Aplicar o estilo acima ao(s) objeto(s) selecionado(s) - + Selected Selecionado - + Texts/dims Textos/dimensões + + + Text spacing + Espaçamento do texto + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Espaçamento da linha + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -6991,12 +7021,12 @@ Para permitir ao FreeCAD baixar essas bibliotecas, responder sim. Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7434,7 +7464,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledNão foi possível escalar os objetos: - + Too many objects selected, max number set to: Muitos objetos selecionados, número máximo definido para: diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.qm b/src/Mod/Draft/Resources/translations/Draft_ro.qm index 4a8b36396a..6ff997930e 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ro.qm and b/src/Mod/Draft/Resources/translations/Draft_ro.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ro.ts b/src/Mod/Draft/Resources/translations/Draft_ro.ts index 3d44e7d2b8..f20d3fbf83 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ro.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ro.ts @@ -567,61 +567,40 @@ Această proprietate este doar pentru citire, deoarece numărul depinde de punct Parameterization factor - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Afișează liniile ascunse - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments - - - - If this is True, this object will be recomputed only if it is - visible - If this is True, this object will be recomputed only if it is - visible - Start angle of the elliptical arc @@ -1022,62 +1001,62 @@ dincolo de linia de cotă The line color of the objects contained within this layer, when used on a TechDraw page - + Line width Latimea liniei - + Line color Culoarea liniei - + The size of the text The size of the text - + The font of the text The font of the text - + The vertical alignment of the text The vertical alignment of the text - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The size of the arrow The size of the arrow - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Display a leader line or not Display a leader line or not @@ -1111,10 +1090,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1637,27 +1647,27 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Warning @@ -3750,20 +3760,40 @@ valoare și folosind tastele [ și ] în timp ce desenați Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Selectat - + Texts/dims Texts/dims + + + Text spacing + Spațierea textului + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Spațiere între linii + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -6994,12 +7024,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7437,7 +7467,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.qm b/src/Mod/Draft/Resources/translations/Draft_ru.qm index ab3dd87d6b..5bcb0f93e1 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_ru.qm and b/src/Mod/Draft/Resources/translations/Draft_ru.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_ru.ts b/src/Mod/Draft/Resources/translations/Draft_ru.ts index 5a1a35b68e..9b6e856601 100644 --- a/src/Mod/Draft/Resources/translations/Draft_ru.ts +++ b/src/Mod/Draft/Resources/translations/Draft_ru.ts @@ -564,59 +564,40 @@ This property is read-only, as the number depends on the points contained within Коэффициент параметризации - + The base object this 2D view must represent Базовый объект представляемый 2D-видом - + The projection vector of this object Вектор проекции объекта - + The way the viewed object must be projected Способ проецирования отображаемого объекта - + The indices of the faces to be projected in Individual Faces mode Индексы граней для проекции в режиме отдельных граней - + Show hidden lines Показать скрытые линии - + Fuse wall and structure objects of same type and material Объединить стены и конструкционные объекты одинакового типа и материала - + Tessellate Ellipses and B-splines into line segments Тесселлировать эллипсы и B-сплайны в сегменты линии - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - Для режимов режущих линий и режущих граней, - это оставляет грани в месте разрезания - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Длина сегментов линии при тесселяции Эллипсов или B-Сплайнов в линейные сегменты - - - - If this is True, this object will be recomputed only if it is - visible - Если это значение Истина, этот объект будет пересчитан, только если он является видимым - Start angle of the elliptical arc @@ -1015,62 +996,62 @@ beyond the dimension line The line color of the objects contained within this layer, when used on a TechDraw page - + Line width Ширина линии - + Line color Цвет линии - + The size of the text Размер текста - + The font of the text Шрифт текста - + The vertical alignment of the text Вертикальное выравнивание текста - + Text color Цвет текста - + Line spacing (relative to font size) Межстрочный интервал (относительно размера шрифта) - + The maximum number of characters on each line of the text box Максимальное количество символов в строке текстового поля - + The size of the arrow Размер стрелки - + The type of arrow of this label Тип стрелки данной метки - + The type of frame around the text of this object Тип рамки вокруг текста данного объекта - + Display a leader line or not Отображать выносную линию или нет @@ -1104,10 +1085,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. Список точек исключения. Любое ребро коснувшееся любой из этих точек не будет рисоваться. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1630,27 +1642,27 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Внимание @@ -3737,20 +3749,40 @@ value by using the [ and ] keys while drawing Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Выбрано - + Texts/dims Texts/dims + + + Text spacing + Интервал текста + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Межстрочный интервал + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -6975,12 +7007,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7418,7 +7450,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_sk.qm b/src/Mod/Draft/Resources/translations/Draft_sk.qm index 6e5ffce148..ba2869020d 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sk.qm and b/src/Mod/Draft/Resources/translations/Draft_sk.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sk.ts b/src/Mod/Draft/Resources/translations/Draft_sk.ts index c0d3237a29..f6a843d9b8 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sk.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sk.ts @@ -568,61 +568,40 @@ This property is read-only, as the number depends on the points contained within Parameterization factor - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Zobraziť skryté súbory - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments - - - - If this is True, this object will be recomputed only if it is - visible - If this is True, this object will be recomputed only if it is - visible - Start angle of the elliptical arc @@ -1024,62 +1003,62 @@ beyond the dimension line The line color of the objects contained within this layer, when used on a TechDraw page - + Line width Hrúbka čiary - + Line color Farba čiary - + The size of the text Veľkosť textu - + The font of the text Písmo textu - + The vertical alignment of the text Zvislé zarovnanie textu - + Text color Farba textu - + Line spacing (relative to font size) Rozstup čiar (relatívny k veľkosti písma) - + The maximum number of characters on each line of the text box Maximálny počet znakov každého riadku textového poľa - + The size of the arrow Veľkosť šípky - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object Typ rámika okolo textu tohto objektu - + Display a leader line or not Display a leader line or not @@ -1113,10 +1092,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1641,27 +1651,27 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Warning @@ -3749,20 +3759,40 @@ value by using the [ and ] keys while drawing Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Selected - + Texts/dims Texts/dims + + + Text spacing + Text spacing + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Rozstup čiar + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -7001,12 +7031,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7444,7 +7474,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.qm b/src/Mod/Draft/Resources/translations/Draft_sl.qm index d9ac2b4e56..8a9f93d046 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sl.qm and b/src/Mod/Draft/Resources/translations/Draft_sl.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sl.ts b/src/Mod/Draft/Resources/translations/Draft_sl.ts index e55fa4e37a..290f94f656 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sl.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sl.ts @@ -564,59 +564,40 @@ Ta lastnost je le za branje, saj je število odvisno od točk znotraj "Točkovne Količnik odoločiljenja - + The base object this 2D view must represent Izhodiščni predmet, ki ga mora predstavljati ta dvorazseži pogled - + The projection vector of this object Vektor preslikavanja tega predmeta - + The way the viewed object must be projected Način preslikave opazovanega predmeta - + The indices of the faces to be projected in Individual Faces mode Kazala ploskev, ki naj se preslikajo v načinu posameznih ploskev - + Show hidden lines Prikaži skrite črte - + Fuse wall and structure objects of same type and material Zlij steno s konstrukcijskimi predmeti enake vrste in snovi - + Tessellate Ellipses and B-splines into line segments Razdeli elipse in B-zlepke na črtne odseke - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - Za načine prereznic in prereznih ploskev, - to pušča ploskve na mestu rezanja - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Dolžina ravnih odsekov, če se na njih razdeli elipse ali B-zlepke - - - - If this is True, this object will be recomputed only if it is - visible - Če drži, potem se ta predmet preračuna le, če je viden - Start angle of the elliptical arc @@ -1017,62 +998,62 @@ preko kotnice Barva črt predmetov, ki so v tej plasti in uporabljeni na strani Tehnična risba - + Line width Širina črte - + Line color Barva črte - + The size of the text Velikost pisave - + The font of the text Vrsta pisave - + The vertical alignment of the text Navpična poravnava besedila - + Text color Barva besedila - + Line spacing (relative to font size) Medvrstični razmik (glede na velikost pisave) - + The maximum number of characters on each line of the text box Največje število znakov v vsaki vrstici besedilnega polja - + The size of the arrow Velikost puščice - + The type of arrow of this label Vrsta puščice za to opisnico - + The type of frame around the text of this object Vrsta okvirja okrog besedila pri tem predmetu - + Display a leader line or not Prikaži opisnično črto, ali ne @@ -1106,10 +1087,41 @@ Use 'arch' to force US arch notation Če želite vsiliti anglosaški arhitekturni zapis, uporabite "arch" - + A list of exclusion points. Any edge touching any of those points will not be drawn. Seznam izključujočih točk. Katerikoli rob bi se dotaknil teh točk, ne bo izrisan. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1633,27 +1645,27 @@ Razpostavitev lahko spremenite v krožno ali v obročno razpostavitev s sprememb Smer odmika ni določena. S premikom kazalke na eno stran predmeta najprej nakažite smer - + Save style Shrani slog - + Name of this new style: Ime novega sloga: - + Name exists. Overwrite? Ime že obstaja. Ali želite prepisati? - + Error: json module not found. Unable to save style Napaka: modula JSON ni mogoče najti. Sloga ni mogoče shraniti - + Warning Opozorilo @@ -3743,20 +3755,40 @@ risanjem spremenite s tipkama [ in ] Shrani trenutni slog kot prednastavitev ... - + Apply above style to selected object(s) Uporabi na izbranih predmetih zgornji slog - + Selected Izbrano - + Texts/dims Besedila / kote + + + Text spacing + Razmik besedila + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Razmik med vrsticami + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -6995,12 +7027,12 @@ Da FreeCADu omogočite prenos teh knjižnic, odgovorite z Da. Za urejanje izberite predmet osnutka - + No edit point found for selected object Na izbranem predmetu ni mogoče najti nobene točke za urejanje - + : this object is not editable : tega predmeta ni mogoče urejati @@ -7438,7 +7470,7 @@ Ta možnost ni na voljo, če je v lastnostih očrta možnost "Uporabi osnovnike Predmetov ni mogoče prevelikostiti: - + Too many objects selected, max number set to: Izbranih je preveč predmetov, največje število je nastavljeno na: diff --git a/src/Mod/Draft/Resources/translations/Draft_sr.qm b/src/Mod/Draft/Resources/translations/Draft_sr.qm index e4a1d45d59..e7367795b7 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sr.qm and b/src/Mod/Draft/Resources/translations/Draft_sr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sr.ts b/src/Mod/Draft/Resources/translations/Draft_sr.ts index 39e3539b88..a82daaddcb 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sr.ts @@ -568,61 +568,40 @@ This property is read-only, as the number depends on the points contained within Parameterization factor - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Прикажи невидљиве линије - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments - - - - If this is True, this object will be recomputed only if it is - visible - If this is True, this object will be recomputed only if it is - visible - Start angle of the elliptical arc @@ -1024,62 +1003,62 @@ beyond the dimension line The line color of the objects contained within this layer, when used on a TechDraw page - + Line width Ширина линије - + Line color Боја линије - + The size of the text The size of the text - + The font of the text The font of the text - + The vertical alignment of the text The vertical alignment of the text - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The size of the arrow The size of the arrow - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Display a leader line or not Display a leader line or not @@ -1113,10 +1092,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1641,27 +1651,27 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Warning @@ -3754,20 +3764,40 @@ value by using the [ and ] keys while drawing Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Изабрано - + Texts/dims Texts/dims + + + Text spacing + Размак у тексту + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Line spacing + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -7003,12 +7033,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7446,7 +7476,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm b/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm index e8ebaafabc..42ff942209 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm and b/src/Mod/Draft/Resources/translations/Draft_sv-SE.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts index a8f6c4411c..ca562803df 100644 --- a/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts +++ b/src/Mod/Draft/Resources/translations/Draft_sv-SE.ts @@ -567,58 +567,40 @@ Denna egenskap är skrivskyddad, eftersom antalet beror på de punkter som ryms Parametriseringsfaktor - + The base object this 2D view must represent Basobjektet som denna 2D-vy måste representera - + The projection vector of this object Projektionsvektorn för detta objekt - + The way the viewed object must be projected Det sätt på vilket det visade objektet måste projiceras - + The indices of the faces to be projected in Individual Faces mode Indexen för de ytor som ska projiceras i enskilt yt-läge - + Show hidden lines Visa dolda linjer - + Fuse wall and structure objects of same type and material Förena vägg- och strukturobjekt av samma typ och material - + Tessellate Ellipses and B-splines into line segments Tessellera ellipser och B-spline till linjesegment - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - För linjeskär- och ytskärlägen, lämnar detta ytorna vid skärplaceringen - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Längd på linjesegment vid tesselering av ellipser eller B-spline till linjesegment - - - - If this is True, this object will be recomputed only if it is - visible - Om detta är sant kommer det här objektet endast att omräknas om det är synligt - Start angle of the elliptical arc @@ -1016,62 +998,62 @@ beyond the dimension line Linjefärgen på objekten som ingår i detta lager, när de används på en TechDraw sida - + Line width Linjebredd - + Line color Linjefärg - + The size of the text Textstorleken - + The font of the text Textens teckensnitt - + The vertical alignment of the text Textens vertikala justering - + Text color Textfärg - + Line spacing (relative to font size) Radavstånd (förhållande till teckenstorlek) - + The maximum number of characters on each line of the text box Det maximala antalet tecken på varje rad i textrutan - + The size of the arrow Pilstorlek - + The type of arrow of this label Piltypen för denna etikett - + The type of frame around the text of this object Typ av ram runt texten i det här objektet - + Display a leader line or not Visa en ledarlinje eller inte @@ -1105,10 +1087,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1632,29 +1645,29 @@ Matrisen kan förvandlas till en polär eller en cirkulär matris genom att änd Förskjutningsriktning är inte definierad. Flytta musen på ena sidan av objektet först för att indikera en riktning - + Save style - Save style + Spara stil - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning - Warning + Varning @@ -3737,20 +3750,40 @@ när man närmar sig musen. Du kan också ändra detta Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Markerad - + Texts/dims Texts/dims + + + Text spacing + Textavstånd + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Radavstånd + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -5165,7 +5198,7 @@ Note: C++ exporter is faster, but is not as featureful yet Converting: - Converting: + Konverterar: @@ -6983,12 +7016,12 @@ För att tillåta FreeCAD att ladda ned dessa bibliotek, svara Ja. Välj ett Draft-objekt att redigera - + No edit point found for selected object Ingen redigeringspunkt hittad för markerat objekt - + : this object is not editable : detta objekt går inte att redigera @@ -7413,7 +7446,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabled Placement: - Placement: + Placering: @@ -7426,14 +7459,14 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: mirrored - mirrored + speglad diff --git a/src/Mod/Draft/Resources/translations/Draft_tr.qm b/src/Mod/Draft/Resources/translations/Draft_tr.qm index 0d5b358364..18bee0a801 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_tr.qm and b/src/Mod/Draft/Resources/translations/Draft_tr.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_tr.ts b/src/Mod/Draft/Resources/translations/Draft_tr.ts index 0180532af9..212c0c9699 100644 --- a/src/Mod/Draft/Resources/translations/Draft_tr.ts +++ b/src/Mod/Draft/Resources/translations/Draft_tr.ts @@ -565,60 +565,40 @@ Bu özellik salt okunurdur, çünkü sayı 'Nokta Nesnesi'nde bulunan noktalara Parametrelendirme etkeni - + The base object this 2D view must represent Temel nesne bu 2B görünümü temsil etmelidir - + The projection vector of this object Bu nesnenin izdüşüm vektörü - + The way the viewed object must be projected Görüntülenen nesnenin yansıtılma şekli - + The indices of the faces to be projected in Individual Faces mode Bireysel yüz modunda projelendirilen yüzler endeksleri - + Show hidden lines Gizli çizgileri göster - + Fuse wall and structure objects of same type and material Sigorta duvarı ve yapı nesneleri ile aynı tip ve malzemeden - + Tessellate Ellipses and B-splines into line segments Desenli Elipsler ve B-spline'ları çizgi parçalarına ayırır - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - Bu, yüzleri kesim konumunda bırakır - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Elipsleri veya B-spline'ları mozaikle kaplıyorsanız çizgi segmentlerinin uzunluğu - çizgi parçalarına - - - - If this is True, this object will be recomputed only if it is - visible - Eğer bu True ise, bu nesne sadece doğru ise yeniden hesaplanacaktır. - gözle görülür - Start angle of the elliptical arc @@ -1019,62 +999,62 @@ dışındaki mesafesi TechDraw sayfasında kullanıldığında, bu katmanda bulunan nesnelerin çizgi rengi - + Line width Çizgi Kalınlığı - + Line color Çizgi rengi - + The size of the text Metnin boyutu - + The font of the text Metnin yazı tipi - + The vertical alignment of the text Metnin dikey hizalaması - + Text color Metin rengi - + Line spacing (relative to font size) Satır boşluğu (yazı tipi boyutuna göre) - + The maximum number of characters on each line of the text box Metin kutusunun her satırındaki maksimum karakter sayısı - + The size of the arrow Ok İşaretinin boyutu - + The type of arrow of this label Bu etiketin ok işareti türü - + The type of frame around the text of this object Bu nesnenin metin etrafında çerçeve türü - + Display a leader line or not Kılavuz hattını göster ya da gösterme @@ -1108,10 +1088,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1636,27 +1647,27 @@ Dizi, türü değiştirilerek kutupsal veya dairesel bir diziye dönüştürüle Ofset yönü tanımlanmadı. Bir yönü belirtmek için lütfen fareyi nesnenin her iki yanında hareket ettirin - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Warning @@ -3748,20 +3759,40 @@ sırasında değiştirebilirsiniz Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Seçili - + Texts/dims Texts/dims + + + Text spacing + Birim Aralığı + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Satır aralığı + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -6996,12 +7027,12 @@ Bu kütüphaneleri indirmek için FreeCAD'i etkinleştirmek için Evet cevabın Düzenlemek için bir taslak nesnesi seçin - + No edit point found for selected object Seçilen nesne için düzenleme noktası bulunamadı - + : this object is not editable : bu nesne düzenlenebilir değil @@ -7439,7 +7470,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.qm b/src/Mod/Draft/Resources/translations/Draft_uk.qm index 885c1854c2..44cf383a56 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_uk.qm and b/src/Mod/Draft/Resources/translations/Draft_uk.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_uk.ts b/src/Mod/Draft/Resources/translations/Draft_uk.ts index fb13ef7446..1e1c794c7c 100644 --- a/src/Mod/Draft/Resources/translations/Draft_uk.ts +++ b/src/Mod/Draft/Resources/translations/Draft_uk.ts @@ -566,59 +566,40 @@ This property is read-only, as the number depends on the points contained within Фактор параметризації - + The base object this 2D view must represent Базовий об’єкт, який повинен представляти цей 2D-вигляд - + The projection vector of this object Вектор проекції цього об'єкту - + The way the viewed object must be projected Спосіб, яким об'єкт, що розглядається, має бути спроектованим - + The indices of the faces to be projected in Individual Faces mode Індекси поверхонь, які мають бути спроектовані у режимі Individual Faces - + Show hidden lines Відобразити приховані рядки - + Fuse wall and structure objects of same type and material Запобіжники стін і структури об'єктів одного типу і матеріалу - + Tessellate Ellipses and B-splines into line segments Поділ еліпсів та B-сплайнів на лінійні відрізки - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - Для режимів обрізки ліній та обрізки граней це залишає грані в місці вирізу - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Довжина відрізків ліній, якщо діляться еліпси або B-сплайни -на відрізки лінії - - - - If this is True, this object will be recomputed only if it is - visible - Якщо це вірно, цей об’єкт буде переобчислюватися, лише якщо це видиме - Start angle of the elliptical arc @@ -629,9 +610,8 @@ This property is read-only, as the number depends on the points contained within End angle of the elliptical arc (for a full circle, give it same value as First Angle) - End angle of the elliptical arc - - (for a full circle, give it same value as First Angle) + Кінцевий кут еліптичної дуги +(для повного кола дайте йому те саме значення, що і перший кут) @@ -688,9 +668,9 @@ This property is read-only, as the number depends on the points contained within List of connected edges in the 'Path Object'. If these are present, the copies will be created along these subelements only. Leave this property empty to create copies along the entire 'Path Object'. - List of connected edges in the 'Path Object'. -If these are present, the copies will be created along these subelements only. -Leave this property empty to create copies along the entire 'Path Object'. + Список поєднаних ребер у 'Траєкторія Об'єкту'. +Якщо вони є, копії будуть створені лише за цими підлементами. +Залиште цю властивість порожньою, щоб створювати копії по всьому об'єкту 'Шлях'. @@ -712,7 +692,7 @@ This is useful to adjust for the difference between shape centre and shape refer Force use of 'Vertical Vector' as local Z direction when using 'Original' or 'Tangent' alignment mode - Force use of 'Vertical Vector' as local Z direction when using 'Original' or 'Tangent' alignment mode + Примусово використовувати "Вертикальний вектор" в якості локального напряму Z при використанні 'Оригінального' або 'Дотичного режиму вирівнювання @@ -727,12 +707,12 @@ This is useful to adjust for the difference between shape centre and shape refer - Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'. To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true. - Method to orient the copies along the path. -- Original: X is curve tangent, Y is normal, and Z is the cross product. -- Frenet: aligns the object following the local coordinate system along the path. -- Tangent: similar to 'Original' but the local X axis is pre-aligned to 'Tangent Vector'. + Метод для орієнтації копій вздовж шляху. +- Оригінал: X є дотичною кривою, Y є перпендикулярний, а Z - поперечний продукт. +- Френе: вирівнює об’єкт за допомогою локальної системи координат уздовж шляху. +- Дотичні: подібно до "Оригінал", але локальна вісь X попередньо вирівнюється у "Дотичний вектор". -To get better results with 'Original' or 'Tangent' you may have to set 'Force Vertical' to true. +Щоб отримати кращі результати з 'Оригінал' або 'Дотичний' вам може доведеться встановити "Примусова вертикальна" увімкненим. @@ -1020,62 +1000,62 @@ beyond the dimension line The line color of the objects contained within this layer, when used on a TechDraw page - + Line width Ширина лінії - + Line color Колір лінії - + The size of the text Розмір тексту - + The font of the text Шрифт тексту - + The vertical alignment of the text Вертикальне вирівнювання тексту - + Text color Колір тексту - + Line spacing (relative to font size) Міжрядковий інтервал (по відношенню до розміру шрифту) - + The maximum number of characters on each line of the text box Максимальна кількість символів в кожному рядку текстового поля - + The size of the arrow Розмір стрілки - + The type of arrow of this label Тип стрілки цієї позначки - + The type of frame around the text of this object Тип рамки навколо тексту цього об'єкта - + Display a leader line or not Display a leader line or not @@ -1109,10 +1089,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1637,27 +1648,27 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Увага @@ -3750,20 +3761,40 @@ value by using the [ and ] keys while drawing Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Вибрано - + Texts/dims Texts/dims + + + Text spacing + Інтервал тексту + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Line spacing + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -7002,12 +7033,12 @@ To enabled FreeCAD to download these libraries, answer Yes. Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7445,7 +7476,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_val-ES.qm b/src/Mod/Draft/Resources/translations/Draft_val-ES.qm index 996333ab66..65885ec26a 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_val-ES.qm and b/src/Mod/Draft/Resources/translations/Draft_val-ES.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_val-ES.ts b/src/Mod/Draft/Resources/translations/Draft_val-ES.ts index 841271b59c..9db85ea865 100644 --- a/src/Mod/Draft/Resources/translations/Draft_val-ES.ts +++ b/src/Mod/Draft/Resources/translations/Draft_val-ES.ts @@ -568,61 +568,40 @@ This property is read-only, as the number depends on the points contained within Parameterization factor - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Mostra les línies amagades - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments - - - - If this is True, this object will be recomputed only if it is - visible - If this is True, this object will be recomputed only if it is - visible - Start angle of the elliptical arc @@ -1024,62 +1003,62 @@ beyond the dimension line The line color of the objects contained within this layer, when used on a TechDraw page - + Line width Amplària de línia - + Line color Color de línia - + The size of the text The size of the text - + The font of the text The font of the text - + The vertical alignment of the text The vertical alignment of the text - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The size of the arrow The size of the arrow - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Display a leader line or not Display a leader line or not @@ -1113,10 +1092,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1641,27 +1651,27 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Warning @@ -3743,20 +3753,40 @@ valor mitjançant les tecles [ i ] mentre es dibuixa Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Seleccionat - + Texts/dims Texts/dims + + + Text spacing + Espaiat de text + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Interlineat + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -6975,12 +7005,12 @@ Per a permetre que FreeCAD descarregue aquestes llibreries responeu Sí.Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7418,7 +7448,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_vi.qm b/src/Mod/Draft/Resources/translations/Draft_vi.qm index 55c86505cb..b7e061845f 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_vi.qm and b/src/Mod/Draft/Resources/translations/Draft_vi.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_vi.ts b/src/Mod/Draft/Resources/translations/Draft_vi.ts index 6f06ab1b9e..f7d3bfafe0 100644 --- a/src/Mod/Draft/Resources/translations/Draft_vi.ts +++ b/src/Mod/Draft/Resources/translations/Draft_vi.ts @@ -568,61 +568,40 @@ This property is read-only, as the number depends on the points contained within Parameterization factor - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines Hiển thị những đường bị ẩn - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments - - - - If this is True, this object will be recomputed only if it is - visible - If this is True, this object will be recomputed only if it is - visible - Start angle of the elliptical arc @@ -1024,62 +1003,62 @@ beyond the dimension line The line color of the objects contained within this layer, when used on a TechDraw page - + Line width Chiều rộng đường vẽ - + Line color Màu đường vẽ - + The size of the text The size of the text - + The font of the text The font of the text - + The vertical alignment of the text The vertical alignment of the text - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The size of the arrow The size of the arrow - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Display a leader line or not Display a leader line or not @@ -1113,10 +1092,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1641,27 +1651,27 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Warning @@ -3754,20 +3764,40 @@ value by using the [ and ] keys while drawing Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Đã chọn - + Texts/dims Texts/dims + + + Text spacing + Khoảng cách văn bản + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + Line spacing + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -7004,12 +7034,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7447,7 +7477,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm index 86f2c9d487..315a4c2e4f 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-CN.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts index 0e013e180e..983bc2db78 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-CN.ts @@ -565,61 +565,40 @@ This property is read-only, as the number depends on the points contained within Parameterization factor - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines 显示隐藏线 - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments - - - - If this is True, this object will be recomputed only if it is - visible - If this is True, this object will be recomputed only if it is - visible - Start angle of the elliptical arc @@ -1021,62 +1000,62 @@ beyond the dimension line The line color of the objects contained within this layer, when used on a TechDraw page - + Line width 线宽 - + Line color 线条颜色 - + The size of the text The size of the text - + The font of the text The font of the text - + The vertical alignment of the text The vertical alignment of the text - + Text color 文本颜色 - + Line spacing (relative to font size) Line spacing (relative to font size) - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The size of the arrow The size of the arrow - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Display a leader line or not Display a leader line or not @@ -1110,10 +1089,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1636,27 +1646,27 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Warning @@ -3749,20 +3759,40 @@ value by using the [ and ] keys while drawing Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected 选定 - + Texts/dims Texts/dims + + + Text spacing + 文字间距 + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + 行距 + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -6996,12 +7026,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7439,7 +7469,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm b/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm index b867c1d83f..f1467706b7 100644 Binary files a/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm and b/src/Mod/Draft/Resources/translations/Draft_zh-TW.qm differ diff --git a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts index 33d7d0d04b..e6a5afd87e 100644 --- a/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts +++ b/src/Mod/Draft/Resources/translations/Draft_zh-TW.ts @@ -568,61 +568,40 @@ This property is read-only, as the number depends on the points contained within Parameterization factor - + The base object this 2D view must represent The base object this 2D view must represent - + The projection vector of this object The projection vector of this object - + The way the viewed object must be projected The way the viewed object must be projected - + The indices of the faces to be projected in Individual Faces mode The indices of the faces to be projected in Individual Faces mode - + Show hidden lines 顯示影藏線 - + Fuse wall and structure objects of same type and material Fuse wall and structure objects of same type and material - + Tessellate Ellipses and B-splines into line segments Tessellate Ellipses and B-splines into line segments - - - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - For Cutlines and Cutfaces modes, - this leaves the faces at the cut location - - - - Length of line segments if tessellating Ellipses or B-splines - into line segments - Length of line segments if tessellating Ellipses or B-splines - into line segments - - - - If this is True, this object will be recomputed only if it is - visible - If this is True, this object will be recomputed only if it is - visible - Start angle of the elliptical arc @@ -1024,62 +1003,62 @@ beyond the dimension line The line color of the objects contained within this layer, when used on a TechDraw page - + Line width 線寬 - + Line color 線條顏色 - + The size of the text 字體大小 - + The font of the text 字型 - + The vertical alignment of the text The vertical alignment of the text - + Text color Text color - + Line spacing (relative to font size) Line spacing (relative to font size) - + The maximum number of characters on each line of the text box The maximum number of characters on each line of the text box - + The size of the arrow The size of the arrow - + The type of arrow of this label The type of arrow of this label - + The type of frame around the text of this object The type of frame around the text of this object - + Display a leader line or not Display a leader line or not @@ -1113,10 +1092,41 @@ Leave blank for system default. Use 'arch' to force US arch notation - + A list of exclusion points. Any edge touching any of those points will not be drawn. A list of exclusion points. Any edge touching any of those points will not be drawn. + + + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + For Cutlines and Cutfaces modes, + this leaves the faces at the cut location + + + + Length of line segments if tessellating Ellipses or B-splines + into line segments + Length of line segments if tessellating Ellipses or B-splines + into line segments + + + + If this is True, this object will be recomputed only if it is + visible + If this is True, this object will be recomputed only if it is + visible + + + + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + If this is True, only solid geometry is handled. This overrides the base object's Only Solids property + + + + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + If this is True, the contents are clipped to the borders of the section plane, if applicable. This overrides the base object's Clip property + Dialog @@ -1641,27 +1651,27 @@ The array can be turned into a polar or a circular array by changing its type.Offset direction is not defined. Please move the mouse on either side of the object first to indicate a direction - + Save style Save style - + Name of this new style: Name of this new style: - + Name exists. Overwrite? Name exists. Overwrite? - + Error: json module not found. Unable to save style Error: json module not found. Unable to save style - + Warning Warning @@ -3754,20 +3764,40 @@ value by using the [ and ] keys while drawing Save current style as a preset... - + Apply above style to selected object(s) Apply above style to selected object(s) - + Selected Selected - + Texts/dims Texts/dims + + + Text spacing + 文字間距 + + + + The space between the text and the dimension line + The space between the text and the dimension line + + + + Line spacing + 行距 + + + + The spacing between different lines of text + The spacing between different lines of text + Gui::Dialog::DlgSettingsDraft @@ -7001,12 +7031,12 @@ https://github.com/yorikvanhavre/Draft-dxf-importer Select a Draft object to edit - + No edit point found for selected object No edit point found for selected object - + : this object is not editable : this object is not editable @@ -7444,7 +7474,7 @@ Not available if Draft preference option 'Use Part Primitives' is enabledUnable to scale objects: - + Too many objects selected, max number set to: Too many objects selected, max number set to: diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.qm b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.qm index 92a401e9d6..db43f59dcc 100644 Binary files a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.qm and b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.qm differ diff --git a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.ts b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.ts index fcd06a5791..8fb318d3fb 100644 --- a/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.ts +++ b/src/Mod/Drawing/Gui/Resources/translations/Drawing_pl.ts @@ -6,7 +6,7 @@ Drawing - Rysunek roboczy + Kreślenie @@ -17,7 +17,7 @@ Inserts an Annotation view in the active drawing - Wstawia widok adnotacji w aktywnym rysunku + Wstaw widok adnotacji w aktywnym rysunku @@ -25,18 +25,18 @@ Drawing - Rysunek roboczy + Kreślenie &Clip - & Klip + &Wycinek Inserts a clip group in the active drawing - Wstawia grupę wycinków do aktywnego rysunku + Wstaw grupę wycinków do aktywnego rysunku @@ -44,18 +44,18 @@ Drawing - Rysunek roboczy + Kreślenie &Draft View - Widok &Rysunku Roboczego + Widok &rysunku Inserts a Draft view of the selected object(s) in the active drawing - Wstawia widok Szkicu przez zaznaczenie obiektu(ów) w aktywnym rysunku + Wstaw widok Szkicu przez zaznaczenie obiektu(ów) w aktywnym rysunku @@ -74,7 +74,7 @@ Export a page to an SVG file - Eksport strony do pliku SVG + Wyeksportuj stronę do pliku w formacie DXF @@ -82,7 +82,7 @@ Drawing - Rysunek roboczy + Kreślenie @@ -96,7 +96,7 @@ Drawing - Rysunek roboczy + Kreślenie @@ -110,7 +110,7 @@ Drawing - Rysunek roboczy + Kreślenie @@ -128,7 +128,7 @@ Drawing - Rysunek roboczy + Kreślenie @@ -146,7 +146,7 @@ Drawing - Rysunek roboczy + Kreślenie @@ -157,7 +157,7 @@ Opens the selected page in a browser view - Otwiera wybraną stronę w przeglądarce + Otwórz wybraną stronę w przeglądarce @@ -165,7 +165,7 @@ Drawing - Rysunek roboczy + Kreślenie @@ -183,7 +183,7 @@ Drawing - Rysunek roboczy + Kreślenie @@ -202,7 +202,7 @@ Drawing - Rysunek roboczy + Kreślenie @@ -213,7 +213,7 @@ Inserts a view of a selected spreadsheet in the active drawing - Wstawia widok wybranego arkusza w aktywnym rysunku + Wstaw widok wybranego arkusza w aktywnym rysunku @@ -221,7 +221,7 @@ Drawing - Rysunek roboczy + Kreślenie @@ -618,7 +618,7 @@ Do you want to continue? There is currently no active document to complete the operation - Aktualnie nie ma aktywnego dokumentu aby dokończyć operację + Obecnie nie ma aktywnego dokumentu do zakończenia operacji @@ -768,7 +768,7 @@ Do you want to continue? Drawing - Rysunek roboczy + Kreślenie diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_af.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_af.ts index eb91130065..d33d6495c4 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_af.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_af.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -124,6 +119,11 @@ Solid Solid + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ar.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ar.ts index 120ea22fe3..cc9af8b920 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ar.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ar.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - محدد مرجع الشكل الهندسي لـ - Add @@ -124,6 +119,11 @@ Solid صلب + + + Geometry reference selector for a + محدد مرجع الشكل الهندسي لـ + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts index 531e783a4e..3a3c7673ec 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ca.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Selector de referència de geometria per a - Add @@ -124,6 +119,11 @@ Solid Sòlid + + + Geometry reference selector for a + Selector de referència de geometria per a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts index f60efab8c9..7a11950b0a 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_cs.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Volič referenční geometrie pro - Add @@ -124,6 +119,11 @@ Solid Těleso + + + Geometry reference selector for a + Volič referenční geometrie pro + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts index 244187aa9f..4d888ed281 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_de.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometrie-Referenzauswahl für ein - - - Geometry reference selector for a - Geometrie-Referenzauswahl für ein - Add @@ -124,6 +119,11 @@ Solid Vollkörper + + + Geometry reference selector for a + Geometrie-Referenzauswahl für ein + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts index bea4699046..8a5697245b 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_el.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Επιλογέας γεωμετρίας αναφοράς για ένα - Add @@ -124,6 +119,11 @@ Solid Στερεό + + + Geometry reference selector for a + Επιλογέας γεωμετρίας αναφοράς για ένα + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts index 9f0926cab2..b95aa76607 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_es-ES.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Selector de referencia de geometría para un - - - Geometry reference selector for a - Selector de referencia de geometría para una - Add @@ -124,6 +119,11 @@ Solid Sólido + + + Geometry reference selector for a + Selector de referencia de geometría para una + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts index 21ab1ec8a9..d0b896da01 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_eu.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometria-erreferentziaren hautatzailea honetarako: - - - Geometry reference selector for a - Geometria-erreferentziaren hautatzailea honetarako: - Add @@ -124,6 +119,11 @@ Solid Solidoa + + + Geometry reference selector for a + Geometria-erreferentziaren hautatzailea honetarako: + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts index 073f850015..ad7268f810 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fi.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometrinen viitevalitsin kohteelle - Add @@ -124,6 +119,11 @@ Solid Kiintomuoto + + + Geometry reference selector for a + Geometrinen viitevalitsin kohteelle + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fil.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fil.ts index fe4f69b5bd..cbf7ff229a 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fil.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fil.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -124,6 +119,11 @@ Solid Solid + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts index 6660a22ad0..23515f844c 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_fr.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Sélecteur de référence de géométrie pour une - - - Geometry reference selector for a - Sélecteur de référence de géométrie pour une - Add @@ -124,6 +119,11 @@ Solid Solide + + + Geometry reference selector for a + Sélecteur de référence de géométrie pour une + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts index 48538a9d1d..c8ac280007 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_gl.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - O selector de xeometría de referencia para - Add @@ -124,6 +119,11 @@ Solid Sólido + + + Geometry reference selector for a + O selector de xeometría de referencia para + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts index 57721e0b2a..acb1d513af 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hr.ts @@ -75,11 +75,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Odabir referentne geometrije za - Add @@ -125,6 +120,11 @@ Solid Čvrsto tijelo + + + Geometry reference selector for a + Odabir referentne geometrije za + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts index 0a47b1f621..ac17c1d66b 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_hu.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometria hivatkozás választó ehhez - - - Geometry reference selector for a - Geometria hivatkozás kiválasztó ehhez - Add @@ -124,6 +119,11 @@ Solid Szilárd test + + + Geometry reference selector for a + Geometria hivatkozás kiválasztó ehhez + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts index 62b930612a..ece4a9ea25 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_id.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Pemilih referensi geometri untuk - - - Geometry reference selector for a - Pemilih referensi geometri untuk - Add @@ -124,6 +119,11 @@ Solid Padat + + + Geometry reference selector for a + Pemilih referensi geometri untuk + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts index 5887f03ff8..fddab11d21 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_it.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Selettore della geometria di riferimento per - - - Geometry reference selector for a - Selettore della geometria di riferimento per - Add @@ -124,6 +119,11 @@ Solid Solido + + + Geometry reference selector for a + Selettore della geometria di riferimento per + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts index 85be2bfeb1..3d3f257587 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ja.ts @@ -74,11 +74,6 @@ Geometry reference selector for a ジオメトリー参照セレクター - - - Geometry reference selector for a - ジオメトリー参照セレクター - Add @@ -124,6 +119,11 @@ Solid ソリッド + + + Geometry reference selector for a + ジオメトリー参照セレクター + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_kab.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_kab.ts index 14fdf28ade..0b4f4f0f8c 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_kab.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_kab.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -124,6 +119,11 @@ Solid Solide + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts index ac05969a33..25fac7ecbd 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ko.ts @@ -75,11 +75,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -125,6 +120,11 @@ Solid 복합체 + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_lt.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_lt.ts index 4760410c9a..b5b8e049f2 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_lt.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_lt.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -124,6 +119,11 @@ Solid Pilnaviduris daiktas + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts index 8aa17162d6..4d62307097 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_nl.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometriereferentiekeuze voor een - Add @@ -124,6 +119,11 @@ Solid Volumemodel + + + Geometry reference selector for a + Geometriereferentiekeuze voor een + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_no.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_no.ts index 02acf7a71c..5feb61c8fd 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_no.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_no.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -124,6 +119,11 @@ Solid Solid + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm index d26209f5cb..f7ad338914 100755 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts index 0383718520..ac98a8d0ff 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pl.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Określenie odniesienia do geometrii dla - - - Geometry reference selector for a - Selektor odniesienia geometrii dla - Add @@ -124,6 +119,11 @@ Solid Bryła + + + Geometry reference selector for a + Selektor odniesienia geometrii dla + SolidSelector @@ -2192,7 +2192,7 @@ Box - Sześcian + Prostopadłościan diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts index 45ee966b65..f8efdf8b76 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-BR.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Seletor de referência de geometria para um - - - Geometry reference selector for a - Seletor de referência geometria para um - Add @@ -124,6 +119,11 @@ Solid Sólido + + + Geometry reference selector for a + Seletor de referência geometria para um + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm index 20dbf1ed87..f0994d2cd6 100644 Binary files a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm and b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.qm differ diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts index f474ce62fa..830a7ac017 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_pt-PT.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Seletor de referência de geometria para um - - - Geometry reference selector for a - Seletor de geometria de referência para um - Add @@ -107,7 +102,7 @@ The following geometry elements are allowed to select: - The following geometry elements are allowed to select: + Os seguintes elementos de geometria podem ser selecionados: @@ -124,6 +119,11 @@ Solid Sólido + + + Geometry reference selector for a + Seletor de geometria de referência para um + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts index 1fb7ba5ea9..9af8adde25 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ro.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometrie selectorul de referinţă pentru o - Add @@ -124,6 +119,11 @@ Solid Solid + + + Geometry reference selector for a + Geometrie selectorul de referinţă pentru o + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts index 38569185a3..c213a70342 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_ru.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Выбор геометрии для - Add @@ -124,6 +119,11 @@ Solid Твердотельный объект + + + Geometry reference selector for a + Выбор геометрии для + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sk.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sk.ts index 2c49d92ca2..ae1ebd76d9 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sk.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sk.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -124,6 +119,11 @@ Solid Teleso + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts index cbcc7fb980..b7046dfbf8 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sl.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Izbirnik referenčne geometrije za - - - Geometry reference selector for a - Izbirnik referenčne geometrije za - Add @@ -124,6 +119,11 @@ Solid Telo + + + Geometry reference selector for a + Izbirnik referenčne geometrije za + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts index c0544d98b0..689ea023d9 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sr.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -124,6 +119,11 @@ Solid Чврcто тело + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts index f43cf02490..f36e8a6892 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_sv-SE.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -124,6 +119,11 @@ Solid Solid + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts index d6620d89b8..b11a56d48d 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_tr.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometri referans seçici için bir - Add @@ -124,6 +119,11 @@ Solid Katı + + + Geometry reference selector for a + Geometri referans seçici için bir + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts index 2001b6c724..db3b986fa3 100755 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_uk.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -124,6 +119,11 @@ Solid Суцільне тіло + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts index 78ce76b884..43adc63f18 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_val-ES.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Selector de referència de geometria per a - Add @@ -124,6 +119,11 @@ Solid Sòlid + + + Geometry reference selector for a + Selector de referència de geometria per a + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts index 34d61f95b8..efd3d764ed 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_vi.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Công cụ chọn tham chiếu hình học cho một - Add @@ -124,6 +119,11 @@ Solid Chất rắn + + + Geometry reference selector for a + Công cụ chọn tham chiếu hình học cho một + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts index ae14b3b855..c9f75ba387 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-CN.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - 的几何体参考选择器 - Add @@ -124,6 +119,11 @@ Solid 实体 + + + Geometry reference selector for a + 的几何体参考选择器 + SolidSelector diff --git a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts index 61178c075b..8488c5c415 100644 --- a/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts +++ b/src/Mod/Fem/Gui/Resources/translations/Fem_zh-TW.ts @@ -74,11 +74,6 @@ Geometry reference selector for a Geometry reference selector for a - - - Geometry reference selector for a - Geometry reference selector for a - Add @@ -124,6 +119,11 @@ Solid 實體 + + + Geometry reference selector for a + Geometry reference selector for a + SolidSelector diff --git a/src/Mod/Image/Gui/Resources/translations/Image_cs.qm b/src/Mod/Image/Gui/Resources/translations/Image_cs.qm index cc4acf6ad6..5310909ab9 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_cs.qm and b/src/Mod/Image/Gui/Resources/translations/Image_cs.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_cs.ts b/src/Mod/Image/Gui/Resources/translations/Image_cs.ts index 28c7e55795..12f0e04045 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_cs.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_cs.ts @@ -184,7 +184,7 @@ Standard - Standard + Standardní diff --git a/src/Mod/Image/Gui/Resources/translations/Image_pl.qm b/src/Mod/Image/Gui/Resources/translations/Image_pl.qm index 83df950ad4..b0c6524292 100644 Binary files a/src/Mod/Image/Gui/Resources/translations/Image_pl.qm and b/src/Mod/Image/Gui/Resources/translations/Image_pl.qm differ diff --git a/src/Mod/Image/Gui/Resources/translations/Image_pl.ts b/src/Mod/Image/Gui/Resources/translations/Image_pl.ts index 87b75950d2..9f111c1f46 100644 --- a/src/Mod/Image/Gui/Resources/translations/Image_pl.ts +++ b/src/Mod/Image/Gui/Resources/translations/Image_pl.ts @@ -67,7 +67,7 @@ Create a planar image in the 3D space - Utwórz płaski obraz w przestrzeni 3D + Tworzy płaski obraz w przestrzeni 3D @@ -112,13 +112,13 @@ Image pixel format - Format piksela obrazu + Format pikseli w obrazie Undefined type of colour space for image viewing - Nieokreślony typ przestrzeni kolorów przy podglądzie obrazu + Nieokreślony typ przestrzeni kolorów dla wyświetlenia obrazu diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.qm index dd1736f858..4e08754552 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts index c68ad7446d..454d2ad532 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pl.ts @@ -1303,7 +1303,7 @@ Najpierw uruchom polecenie do naprawy zagięć Cube - Kostka + Sześcian diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.qm b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.qm index fca1a180b4..8e9b4e633a 100644 Binary files a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.qm and b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.qm differ diff --git a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.ts b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.ts index 5b0d113d46..6aef5f7a94 100644 --- a/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.ts +++ b/src/Mod/Mesh/Gui/Resources/translations/Mesh_pt-PT.ts @@ -740,7 +740,7 @@ Mesh Create - Mesh Create + Criar Malha diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.qm index ceb9cbc3d0..2c5842f6a1 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.ts index 9e97bedaf2..276dbd91b8 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_cs.ts @@ -285,7 +285,7 @@ This command only works with a 'mesh' object, not a regular face or surface. To Standard - Standard + Standardní diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.qm b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.qm index 054dc8ac9d..05fe392ebe 100644 Binary files a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.qm and b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.qm differ diff --git a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.ts b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.ts index a2456ca42d..8c4eda3de7 100644 --- a/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.ts +++ b/src/Mod/MeshPart/Gui/Resources/translations/MeshPart_pt-PT.ts @@ -378,7 +378,7 @@ O menor valor é 0. Estimate - Estimate + Estimativa diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.qm b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.qm index ebcf152721..0a38ce4fb5 100644 Binary files a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.qm and b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.qm differ diff --git a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.ts b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.ts index 589b08b05e..9e94b98b3d 100644 --- a/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.ts +++ b/src/Mod/OpenSCAD/Resources/translations/OpenSCAD_sv-SE.ts @@ -194,12 +194,12 @@ Load - Load + Ladda Save - Save + Spara diff --git a/src/Mod/Part/Gui/Resources/translations/Part_af.ts b/src/Mod/Part/Gui/Resources/translations/Part_af.ts index eed21bbb5e..5bbea643fe 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_af.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_af.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ar.ts b/src/Mod/Part/Gui/Resources/translations/Part_ar.ts index 28958f72f5..2b93db274e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ar.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ar.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ca.ts b/src/Mod/Part/Gui/Resources/translations/Part_ca.ts index a96a074b1e..98a18437d2 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ca.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ca.ts @@ -258,6 +258,16 @@ Es crearà un 'Filtre de Compost' per a cada forma. Part_SplitFeatures + + + Boolean Fragments + Fragments booleans + + + + Split objects where they intersect + Divideix els objectes on s'interseccionen + Boolean fragments @@ -345,16 +355,6 @@ Feu clic a 'Continua' per a crear la propietat de totes formes, o en 'Interromp' Slice to compound Llesca a la composició - - - Boolean Fragments - Fragments booleans - - - - Split objects where they intersect - Divideix els objectes on s'interseccionen - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts index 487125c98b..f9bc563fa0 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_cs.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_cs.ts @@ -260,6 +260,16 @@ Vytvoří "Filtr složenin" pro každý tvar. Part_SplitFeatures + + + Boolean Fragments + Booleovské fragmenty + + + + Split objects where they intersect + Rozdělit objekty, kde se protínají + Boolean fragments @@ -349,16 +359,6 @@ Klikněte 'Pokračovat' chcete-li přesto prvek vytvořit, nebo "Přerušit" pro Slice to compound Plátkovat na složeninu - - - Boolean Fragments - Booleovské fragmenty - - - - Split objects where they intersect - Rozdělit objekty, kde se protínají - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_de.qm b/src/Mod/Part/Gui/Resources/translations/Part_de.qm index db33228755..1664411abf 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_de.qm and b/src/Mod/Part/Gui/Resources/translations/Part_de.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_de.ts b/src/Mod/Part/Gui/Resources/translations/Part_de.ts index f70d2298bd..8d2057a302 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_de.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_de.ts @@ -260,6 +260,16 @@ Es wird einen 'Compound-Filter' für jede Form erzeugen. Part_SplitFeatures + + + Boolean Fragments + Boolesche Fragmente + + + + Split objects where they intersect + Auftrennen von Objekten an deren Schnittstellen + Boolean fragments @@ -345,16 +355,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Slice to compound Teilen zu einem Verbund - - - Boolean Fragments - Boolesche Fragmente - - - - Split objects where they intersect - Auftrennen von Objekten an deren Schnittstellen - Slice a selected object by using other objects as cutting tools. @@ -1293,7 +1293,7 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Second directrix line for ellipse and hyperbola. AttachmentLine mode tooltip - Zweite leitgerade für Ellipse und Hyperbel. + Zweite Leitgerade für Ellipse und Hyperbel. @@ -4162,7 +4162,7 @@ Bitte markieren Sie zuerst ein oder mehrere Kantenelemente. Polygon: - Polygon: + Vieleck: diff --git a/src/Mod/Part/Gui/Resources/translations/Part_el.ts b/src/Mod/Part/Gui/Resources/translations/Part_el.ts index 41268212ec..330e9e2642 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_el.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_el.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts index 3ab972017f..c76ec901bf 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_es-ES.ts @@ -260,6 +260,16 @@ Se creará un 'Filtro Compuesto' para cada forma. Part_SplitFeatures + + + Boolean Fragments + Fragmentos booleanos + + + + Split objects where they intersect + Corta objetos donde intersectan + Boolean fragments @@ -349,16 +359,6 @@ Haga clic en 'Continuar' para crear la función de todos modos, o 'Abortar' para Slice to compound Corte a compuesto - - - Boolean Fragments - Fragmentos booleanos - - - - Split objects where they intersect - Corta objetos donde intersectan - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_eu.ts b/src/Mod/Part/Gui/Resources/translations/Part_eu.ts index 91370912e1..08afe68dc8 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_eu.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_eu.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Zati boolearrak + + + + Split objects where they intersect + Zatitu objektuak haiek ebakitzen diren gunean + Boolean fragments @@ -348,16 +358,6 @@ Hala ere elementua sortu nahi baduzu, egin klik 'Jarraitu' aukeran, edo bestela Slice to compound Xerratu konposatua - - - Boolean Fragments - Zati boolearrak - - - - Split objects where they intersect - Zatitu objektuak haiek ebakitzen diren gunean - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fi.ts b/src/Mod/Part/Gui/Resources/translations/Part_fi.ts index 83259d4175..e685863e53 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fi.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fi.ts @@ -260,6 +260,16 @@ Jokaiselle muodolle luodaan myös 'Yhdistelmäobjektin suodatin'. Part_SplitFeatures + + + Boolean Fragments + Boolen operaation sirpaleet + + + + Split objects where they intersect + Jaa objektit paloihin leikkauskohdista + Boolean fragments @@ -349,16 +359,6 @@ Napsauta 'Jatka' luodaksesi ominaisuuden joka tapauksessa, tai 'Keskeytä' peruu Slice to compound Siivuta yhdistelmämuodoksi - - - Boolean Fragments - Boolen operaation sirpaleet - - - - Split objects where they intersect - Jaa objektit paloihin leikkauskohdista - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fil.ts b/src/Mod/Part/Gui/Resources/translations/Part_fil.ts index 02ff32b568..0a05e29036 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fil.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fil.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts index aa9360a6c1..8ff221848e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_fr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_fr.ts @@ -259,6 +259,16 @@ Cela créera un 'filtre composé' pour chaque forme. Part_SplitFeatures + + + Boolean Fragments + Fragments Booléens + + + + Split objects where they intersect + Diviser les objets à leur intersection + Boolean fragments @@ -348,16 +358,6 @@ Cliquez sur 'Continuer' pour créer la fonction quand même, ou 'Abandonner' pou Slice to compound Trancher vers composé - - - Boolean Fragments - Fragments Booléens - - - - Split objects where they intersect - Diviser les objets à leur intersection - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_gl.ts b/src/Mod/Part/Gui/Resources/translations/Part_gl.ts index 4b17cbaeb1..21da116657 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_gl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_gl.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Fragmentos booleanos + + + + Split objects where they intersect + Divide obxectos onde intersecten + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Tallar un composto - - - Boolean Fragments - Fragmentos booleanos - - - - Split objects where they intersect - Divide obxectos onde intersecten - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hr.ts b/src/Mod/Part/Gui/Resources/translations/Part_hr.ts index ae2bf5b37d..faf5781f8d 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_hr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_hr.ts @@ -268,6 +268,16 @@ Stvorit će 'Složeni filtar' za svaki oblik. Part_SplitFeatures + + + Boolean Fragments + Booleovi Fragmenti + + + + Split objects where they intersect + Razdjeli objekate gdje se sijeku + Boolean fragments @@ -359,16 +369,6 @@ Kliknite "Nastavi" da biste svejedno stvorili značajku ili "Prekini" da biste j Slice to compound Razdijeli u složeni objekt - - - Boolean Fragments - Booleovi Fragmenti - - - - Split objects where they intersect - Razdjeli objekate gdje se sijeku - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts index db579c368a..071e016849 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_hu.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_hu.ts @@ -259,6 +259,16 @@ Ez létrehoz egy 'Összetett szűrő'-t minden alakzathoz. Part_SplitFeatures + + + Boolean Fragments + Logikai töredékek + + + + Split objects where they intersect + Metszőpontnál szétválasztja a tárgyakat + Boolean fragments @@ -347,16 +357,6 @@ Kattintson a 'Folytatás' gombra a funkció létrehozásához, vagy a 'Megszakí Slice to compound Szeletelje összetevőkre - - - Boolean Fragments - Logikai töredékek - - - - Split objects where they intersect - Metszőpontnál szétválasztja a tárgyakat - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_id.ts b/src/Mod/Part/Gui/Resources/translations/Part_id.ts index e19dae6616..1cc2fa305a 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_id.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_id.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_it.ts b/src/Mod/Part/Gui/Resources/translations/Part_it.ts index 3a55efbfc4..6738e2b045 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_it.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_it.ts @@ -259,6 +259,16 @@ Creerà un 'filtro composto' per ogni forma. Part_SplitFeatures + + + Boolean Fragments + Frammenti booleani + + + + Split objects where they intersect + Dividi gli oggetti dove si intersecano + Boolean fragments @@ -348,16 +358,6 @@ fare clic su 'Continua' per creare comunque la forma, o 'Annulla' per annullare. Slice to compound Trancia in composto - - - Boolean Fragments - Frammenti booleani - - - - Split objects where they intersect - Dividi gli oggetti dove si intersecano - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts index 6fa875c693..64d94bf705 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ja.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ja.ts @@ -259,6 +259,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + ブーリアン演算 フラグメント + + + + Split objects where they intersect + 交差するオブジェクトを切断 + Boolean fragments @@ -346,16 +356,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Slice to compound コンパウンドへスライス - - - Boolean Fragments - ブーリアン演算 フラグメント - - - - Split objects where they intersect - 交差するオブジェクトを切断 - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_kab.ts b/src/Mod/Part/Gui/Resources/translations/Part_kab.ts index eb6dab0af4..4178075de7 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_kab.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_kab.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ko.ts b/src/Mod/Part/Gui/Resources/translations/Part_ko.ts index 857ca95430..6a09d73984 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ko.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ko.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_lt.ts b/src/Mod/Part/Gui/Resources/translations/Part_lt.ts index bc38dc9d59..48660def4d 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_lt.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_lt.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts index db776e61cd..c0a8ade02b 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_nl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_nl.ts @@ -260,6 +260,16 @@ Het maakt een 'Samengesteld Filter' voor elke vorm. Part_SplitFeatures + + + Boolean Fragments + Booleaanse fragmenten + + + + Split objects where they intersect + Splits voorwerpen waar ze overlappen + Boolean fragments @@ -349,16 +359,6 @@ Klik op 'Doorgaan' om de functie toch aan te maken, of op 'Afbreken' als u wilt Slice to compound Versnijden tot groep - - - Boolean Fragments - Booleaanse fragmenten - - - - Split objects where they intersect - Splits voorwerpen waar ze overlappen - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_no.ts b/src/Mod/Part/Gui/Resources/translations/Part_no.ts index 743b5330da..cf2f26ec41 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_no.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_no.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pl.qm b/src/Mod/Part/Gui/Resources/translations/Part_pl.qm index 6a6a5c920a..b44b35c0d5 100644 Binary files a/src/Mod/Part/Gui/Resources/translations/Part_pl.qm and b/src/Mod/Part/Gui/Resources/translations/Part_pl.qm differ diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts index f7ca2a2021..96c6870144 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pl.ts @@ -260,6 +260,16 @@ Stworzy to „Filtr kompozytowy” dla każdego kształtu. Part_SplitFeatures + + + Boolean Fragments + Fragmenty funkcji logicznej + + + + Split objects where they intersect + Podziel obiekty, które się przecinają + Boolean fragments @@ -349,16 +359,6 @@ Kliknij "Kontynuuj", aby mimo to utworzyć właściwość, lub "Przerwij", aby a Slice to compound Krojenie na kształty złożone - - - Boolean Fragments - Fragmenty funkcji logicznej - - - - Split objects where they intersect - Podziel obiekty, które się przecinają - Slice a selected object by using other objects as cutting tools. @@ -4000,7 +4000,7 @@ Zaznacz wcześniej jedną lub więcej krawędzi. Box - Sześcian + Prostopadłościan diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts index a813d3c4da..88caa60d24 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pt-BR.ts @@ -260,6 +260,16 @@ Será criado um 'Filtro Composto' para cada forma. Part_SplitFeatures + + + Boolean Fragments + Fragmentos booleanos + + + + Split objects where they intersect + Separa os objetos, pelas suas intersecções + Boolean fragments @@ -349,16 +359,6 @@ clique em 'Continuar' para criar o objeto mesmo assim, ou 'Abortar' para cancela Slice to compound Fatiar para composto - - - Boolean Fragments - Fragmentos booleanos - - - - Split objects where they intersect - Separa os objetos, pelas suas intersecções - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts index 8412407151..a48a6221e7 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_pt-PT.ts @@ -260,6 +260,16 @@ Irá criar um 'Filtro Composto' para cada forma. Part_SplitFeatures + + + Boolean Fragments + Fragmentos de booleano + + + + Split objects where they intersect + Separa os objetos, onde eles se intercetam + Boolean fragments @@ -349,16 +359,6 @@ clique em 'Continuar' para criar o objeto de qualquer maneira, ou 'Abortar' para Slice to compound Fatia para composto - - - Boolean Fragments - Fragmentos de booleano - - - - Split objects where they intersect - Separa os objetos, onde eles se intercetam - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts index 2484d504e5..5f2bcdb43b 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ro.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ro.ts @@ -260,6 +260,16 @@ Va crea un "Filtru compus" pentru fiecare formă. Part_SplitFeatures + + + Boolean Fragments + Fragmente booleene + + + + Split objects where they intersect + Separă obiectele acolo unde se intersectează + Boolean fragments @@ -349,16 +359,6 @@ Faceţi clic pe "Continuaţi" pentru a crea forma oricum sau pe 'Abandonați' pe Slice to compound Slice to compound - - - Boolean Fragments - Fragmente booleene - - - - Split objects where they intersect - Separă obiectele acolo unde se intersectează - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts index 5e33d84eb6..d20a2021c9 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_ru.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_ru.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Булевы фрагменты + + + + Split objects where they intersect + Разделение объектов там, где они пересекаются + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Slice to compound Разрезать и в соединение - - - Boolean Fragments - Булевы фрагменты - - - - Split objects where they intersect - Разделение объектов там, где они пересекаются - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sk.ts b/src/Mod/Part/Gui/Resources/translations/Part_sk.ts index f5bace8a79..80af9c8849 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sk.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sk.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Rozdelí objekty v mieste, kde sa pretínajú + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Rozdelí objekty v mieste, kde sa pretínajú - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sl.ts b/src/Mod/Part/Gui/Resources/translations/Part_sl.ts index 0266c28ac7..7c8f6c719e 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sl.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sl.ts @@ -260,6 +260,16 @@ Za vsako obliko bo ustvarjeno "Sito sestava". Part_SplitFeatures + + + Boolean Fragments + Drobci logične operacije + + + + Split objects where they intersect + Razcepi predmete, kjer se sekajo + Boolean fragments @@ -348,16 +358,6 @@ Kliknite "Nadaljuj", če želite vseeno ustvariti značilnost, ali "Prekini", za Slice to compound Razcepki v sestav - - - Boolean Fragments - Drobci logične operacije - - - - Split objects where they intersect - Razcepi predmete, kjer se sekajo - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sr.ts b/src/Mod/Part/Gui/Resources/translations/Part_sr.ts index 5a17449613..3f22323e63 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sr.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts index fb725158a3..cf7c5c58e5 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_sv-SE.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Booleska fragment + + + + Split objects where they intersect + Dela objekt där de skär varandra + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Delning till komposition - - - Boolean Fragments - Booleska fragment - - - - Split objects where they intersect - Dela objekt där de skär varandra - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_tr.ts b/src/Mod/Part/Gui/Resources/translations/Part_tr.ts index 1736b8fed2..bd2027ae23 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_tr.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_tr.ts @@ -258,6 +258,16 @@ Bu işlem her bir şekil için 'Birleşim Süzgeci' oluşturacak. Part_SplitFeatures + + + Boolean Fragments + Mantıksal (Boolean) Parçalar + + + + Split objects where they intersect + Nesnelerin kesiştiği yerlerden ayır + Boolean fragments @@ -345,16 +355,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel. Slice to compound Bileşiği dilimle - - - Boolean Fragments - Mantıksal (Boolean) Parçalar - - - - Split objects where they intersect - Nesnelerin kesiştiği yerlerden ayır - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts index ef5c5455f7..44e2f8daf8 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_uk.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_uk.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts index d0c99983a7..09c00f55c9 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_val-ES.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Fragments booleans + + + + Split objects where they intersect + Divideix els objectes on s'intersequen + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Llesca a la composició - - - Boolean Fragments - Fragments booleans - - - - Split objects where they intersect - Divideix els objectes on s'intersequen - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_vi.ts b/src/Mod/Part/Gui/Resources/translations/Part_vi.ts index 8b8468157e..62fe6a65ee 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_vi.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_vi.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts index dbe9778d51..001df6b499 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_zh-CN.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + 布尔片段 + + + + Split objects where they intersect + 从交叉处分割对象 + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - 布尔片段 - - - - Split objects where they intersect - 从交叉处分割对象 - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts index 3b36e9cea4..5302cc8fbb 100644 --- a/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts +++ b/src/Mod/Part/Gui/Resources/translations/Part_zh-TW.ts @@ -260,6 +260,16 @@ It will create a 'Compound Filter' for each shape. Part_SplitFeatures + + + Boolean Fragments + Boolean Fragments + + + + Split objects where they intersect + Split objects where they intersect + Boolean fragments @@ -349,16 +359,6 @@ Click 'Continue' to create the feature anyway, or 'Abort' to cancel.Slice to compound Slice to compound - - - Boolean Fragments - Boolean Fragments - - - - Split objects where they intersect - Split objects where they intersect - Slice a selected object by using other objects as cutting tools. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.qm index 771987d334..2b672db032 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts index ae2d3d94ee..1e47ef5e29 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_cs.ts @@ -2373,7 +2373,7 @@ measured along the specified direction Standard - Standard + Standardní @@ -4167,7 +4167,7 @@ Only available for holes without thread Standard - Standard + Standardní diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm index b75c4b8ed5..c72bd9871c 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts index 4eb1479e96..4d0acead65 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_de.ts @@ -1118,7 +1118,7 @@ Wenn Null, ist er gleich Radius2 Polygon: - Polygon: + Vieleck: @@ -4418,17 +4418,17 @@ account for the depth of blind holes Sprocket... - Sprocket... + Kettenrad... Involute gear... - Involute gear... + Evolventenrad... Shaft design wizard - Shaft design wizard + Assistent für Drehteilentwurf @@ -4438,12 +4438,12 @@ account for the depth of blind holes Part Design Helper - Part Design Helper + Part Design - Helfer Part Design Modeling - Part Design Modeling + Part Design - Modellierung diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.qm index 1ab48e753d..581a5fcd22 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts index 7d61c1fbc0..fca4398d97 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_el.ts @@ -11,7 +11,7 @@ Additive helix - Additive helix + Πρόσθετο Σπείρωμα diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.qm index 3317c4941d..66b5b0efef 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts index fa0c0d8e74..d70c50dad9 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_es-ES.ts @@ -4417,17 +4417,17 @@ la profundidad de los agujeros ciegos Sprocket... - Sprocket... + Piñón... Involute gear... - Involute gear... + Engranaje envolvente... Shaft design wizard - Shaft design wizard + Asistente de diseño de eje @@ -4437,12 +4437,12 @@ la profundidad de los agujeros ciegos Part Design Helper - Part Design Helper + Ayudante de diseño de piezas Part Design Modeling - Part Design Modeling + Modelado de diseño de piezas diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.qm index b8da744914..3b516ab33d 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts index 224b0195a2..5ca0300bb1 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_fr.ts @@ -4409,17 +4409,17 @@ compte pour la profondeur des trous borgnes Sprocket... - Sprocket... + Pignon... Involute gear... - Involute gear... + Engrenage à développante... Shaft design wizard - Shaft design wizard + Assistant de conception d'arbre @@ -4429,12 +4429,12 @@ compte pour la profondeur des trous borgnes Part Design Helper - Part Design Helper + Assistant Conception de Pièces Part Design Modeling - Part Design Modeling + Modélisation Conception de Pièces diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.qm index b55702b93f..703889932b 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts index 72a007cd53..9c30ad4903 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_hu.ts @@ -4412,7 +4412,7 @@ a vak lyukak mélységéhez Sprocket... - Sprocket... + Lánckerék... diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm index 3cb164a89d..8383a42618 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts index e45b4df234..a0ea813afc 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_it.ts @@ -4416,17 +4416,17 @@ account for the depth of blind holes Sprocket... - Sprocket... + Pignone... Involute gear... - Involute gear... + Ruota dentata ad evolvente... Shaft design wizard - Shaft design wizard + Progettazione albero assistita @@ -4436,12 +4436,12 @@ account for the depth of blind holes Part Design Helper - Part Design Helper + Part Design - Aiutante Part Design Modeling - Part Design Modeling + Part Design - Modellazione diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.qm index 118c440a45..650656e2f5 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts index c0c6a0d968..de2e771439 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pl.ts @@ -1299,7 +1299,7 @@ Jeśli wartość wynosi zero, jest równa wartości promienia 2 Fuse - Suma + Scalenie @@ -4423,17 +4423,17 @@ dla głębokości otworów nieprzelotowych Sprocket... - Sprocket... + Koło łańcuchowe ... Involute gear... - Involute gear... + Przekładnia ewolwentowa ... Shaft design wizard - Shaft design wizard + Kreator projektowania wału @@ -4443,12 +4443,12 @@ dla głębokości otworów nieprzelotowych Part Design Helper - Part Design Helper + Projekt Części - pomocnik Part Design Modeling - Part Design Modeling + Projekt Części - modelowanie diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.qm index be9b7122cf..57d33586b8 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts index fc451075bb..c972349c08 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_pt-BR.ts @@ -776,7 +776,7 @@ Convert to MultiTransform feature - Convert to MultiTransform feature + Converter em função de multi-transformação @@ -791,17 +791,17 @@ Migrate legacy part design features to Bodies - Migrate legacy part design features to Bodies + Migrar recursos de design de partes legadas para os corpos Move tip to selected feature - Move tip to selected feature + Mover dica para a característica selecionada Duplicate a PartDesign object - Duplicate a PartDesign object + Duplicar um objeto PartDesign @@ -1341,7 +1341,7 @@ Se for zero, é igual ao Raio2 Invalid wedge parameters - Invalid wedge parameters + Parâmetros de cunha inválidos @@ -1377,8 +1377,8 @@ Se for zero, é igual ao Raio2 Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Clique no botão para entrar no modo de seleção, +clique novamente para terminar a seleção @@ -1389,8 +1389,8 @@ click again to end selection - select an item to highlight it - double-click on an item to see the chamfers - - select an item to highlight it -- double-click on an item to see the chamfers + - selecione um item para destacá-lo +- clique duas vezes em um item para ver os chanfros @@ -1524,8 +1524,8 @@ click again to end selection Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Clique no botão para entrar no modo de seleção, +clique novamente para terminar a seleção @@ -1703,8 +1703,8 @@ click again to end selection Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Clique no botão para entrar no modo de seleção, +clique novamente para terminar a seleção @@ -2893,8 +2893,8 @@ medido ao longo da direção especificada Click button to enter selection mode, click again to end selection - Click button to enter selection mode, -click again to end selection + Clique no botão para entrar no modo de seleção, +clique novamente para terminar a seleção @@ -3279,17 +3279,17 @@ click again to end selection Cannot use this command as there is no solid to subtract from. - Cannot use this command as there is no solid to subtract from. + Não é possível usar este comando pois não há um sólido para subtrair. Cannot use selected object. Selected object must belong to the active body - Cannot use selected object. Selected object must belong to the active body + Não é possível usar o objeto selecionado. O objeto selecionado deve pertencer ao corpo ativo Consider using a ShapeBinder or a BaseFeature to reference external geometry in a body. - Consider using a ShapeBinder or a BaseFeature to reference external geometry in a body. + Considere usar um ShapeBinder ou um BaseFeature para fazer referência à geometria externa em um corpo. @@ -3528,7 +3528,7 @@ This may lead to unexpected results. Early feature must not depend on later feature. - Early feature must not depend on later feature. + A característica inicial não deve depender da funcionalidade posterior. @@ -3761,9 +3761,9 @@ This feature is broken and can't be edited. Note: If you choose to migrate you won't be able to edit the file with an older FreeCAD version. If you refuse to migrate you won't be able to use new PartDesign features like Bodies and Parts. As a result you also won't be able to use your parts in the assembly workbench. Although you will be able to migrate any moment later with 'Part Design -> Migrate'. - Note: If you choose to migrate you won't be able to edit the file with an older FreeCAD version. -If you refuse to migrate you won't be able to use new PartDesign features like Bodies and Parts. As a result you also won't be able to use your parts in the assembly workbench. -Although you will be able to migrate any moment later with 'Part Design -> Migrate'. + Observe: Se você optar por migrar, não será capaz de editar o arquivo com uma versão mais antiga do FreeCAD. +Se você se recusar a migrar, não será capaz de usar novos recursos de PartDesign como Corpos e Partes. Como resultado, você também não será capaz de usar suas partes na bancada de trabalho de montagem. +Embora você possa migrar a qualquer momento mais tarde com 'Part Design -> Migrar'. diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.qm index 80c12b3862..59c5febde0 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts index f40b0d28e9..c575c4e3e8 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ro.ts @@ -4420,17 +4420,17 @@ account for the depth of blind holes Sprocket... - Sprocket... + Pinion... Involute gear... - Involute gear... + Roată dințată evolventică... Shaft design wizard - Shaft design wizard + Asistent design arbori @@ -4440,12 +4440,12 @@ account for the depth of blind holes Part Design Helper - Part Design Helper + Ajutor Design Piesă Part Design Modeling - Part Design Modeling + Modelare design piese diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm index 5efcda770d..315cce9c0f 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts index abf1ed5359..c94a87be12 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_ru.ts @@ -4422,17 +4422,17 @@ account for the depth of blind holes Sprocket... - Sprocket... + Звездочка... Involute gear... - Involute gear... + Эвольвентная передача... Shaft design wizard - Shaft design wizard + Мастер дизайна вала @@ -4442,12 +4442,12 @@ account for the depth of blind holes Part Design Helper - Part Design Helper + Помощник по разработке детали Part Design Modeling - Part Design Modeling + Моделирование при разработке детали diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.qm index af97bc1b4c..d11297acb4 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts index 3fb6ae6e79..9c809184ad 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sl.ts @@ -4420,12 +4420,12 @@ bo upoštevana velikost vrtalne konice Sprocket... - Sprocket... + Verižnik ... Involute gear... - Involute gear... + Evolventni zobnik ... @@ -4440,12 +4440,12 @@ bo upoštevana velikost vrtalne konice Part Design Helper - Part Design Helper + Pomočnik za oblikovanje delov Part Design Modeling - Part Design Modeling + Oblikovanje delov diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.qm index 228c5d142a..f204d9f281 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts index 226c9bef1a..c794906d73 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_sv-SE.ts @@ -761,7 +761,7 @@ Make copy - Make copy + Skapa kopia @@ -905,7 +905,7 @@ Module: - Module: + Modul: @@ -1413,7 +1413,7 @@ click again to end selection Distance and angle - Distance and angle + Avstånd och vinkel @@ -1428,7 +1428,7 @@ click again to end selection Size 2 - Size 2 + Storlek 2 @@ -1760,7 +1760,7 @@ click again to end selection Status: - Status: + Status: @@ -1859,7 +1859,7 @@ click again to end selection Left handed - Left handed + Vänsterhänt @@ -3717,7 +3717,7 @@ This feature is broken and can't be edited. Synchronize - Synchronize + Synkronisera @@ -3799,72 +3799,72 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi ANSI 25 - ANSI 25 + ANSI 25 ANSI 35 - ANSI 35 + ANSI 35 ANSI 41 - ANSI 41 + ANSI 41 ANSI 40 - ANSI 40 + ANSI 40 ANSI 50 - ANSI 50 + ANSI 50 ANSI 60 - ANSI 60 + ANSI 60 ANSI 80 - ANSI 80 + ANSI 80 ANSI 100 - ANSI 100 + ANSI 100 ANSI 120 - ANSI 120 + ANSI 120 ANSI 140 - ANSI 140 + ANSI 140 ANSI 160 - ANSI 160 + ANSI 160 ANSI 180 - ANSI 180 + ANSI 180 ANSI 200 - ANSI 200 + ANSI 200 ANSI 240 - ANSI 240 + ANSI 240 @@ -3879,37 +3879,37 @@ Although you will be able to migrate any moment later with 'Part Design -> Mi ISO 606 06B - ISO 606 06B + ISO 606 06B ISO 606 08B - ISO 606 08B + ISO 606 08B ISO 606 10B - ISO 606 10B + ISO 606 10B ISO 606 12B - ISO 606 12B + ISO 606 12B ISO 606 16B - ISO 606 16B + ISO 606 16B ISO 606 20B - ISO 606 20B + ISO 606 20B ISO 606 24B - ISO 606 24B + ISO 606 24B @@ -4259,7 +4259,7 @@ over 90: larger hole radius at the bottom Custom values - Custom values + Anpassade värden diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.qm b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.qm index 2c59de7112..d1475d41ca 100644 Binary files a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.qm and b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.qm differ diff --git a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts index 01ce354b11..a225b45bf7 100644 --- a/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts +++ b/src/Mod/PartDesign/Gui/Resources/translations/PartDesign_uk.ts @@ -4423,12 +4423,12 @@ account for the depth of blind holes Sprocket... - Sprocket... + Зірочка... Involute gear... - Involute gear... + Евольвентне зачеплення... diff --git a/src/Mod/Path/Gui/Resources/translations/Path_af.ts b/src/Mod/Path/Gui/Resources/translations/Path_af.ts index 48e7f14a37..9f45ab775b 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_af.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_af.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - - Stop index(angle) for rotational scan - Stop index(angle) for rotational scan - - - - Dropcutter lines are created parallel to this axis. - Dropcutter lines are created parallel to this axis. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Should the operation be limited by the stock object or by the bounding box of the base object - - - Additional offset to the selected bounding box - Additional offset to the selected bounding box - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Enable optimization which removes unnecessary points from G-Code output + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - The model will be rotated around this axis. - The model will be rotated around this axis. - - - - Start index(angle) for rotational scan - Start index(angle) for rotational scan + + Stop index(angle) for rotational scan + Stop index(angle) for rotational scan @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Cut through waste to depth at model edge, releasing the model. + + + Dropcutter lines are created parallel to this axis. + Dropcutter lines are created parallel to this axis. + + + + Additional offset to the selected bounding box + Additional offset to the selected bounding box + + + + The model will be rotated around this axis. + The model will be rotated around this axis. + + + + Start index(angle) for rotational scan + Start index(angle) for rotational scan + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied The path to be copied - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + The library to use to generate the path + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - The library to use to generate the path + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utils - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - @@ -1980,6 +1980,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3461,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3480,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3984,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4233,6 +4233,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + The Job has no selected Base object. + Check the path job for common errors @@ -4313,11 +4318,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height - - - The Job has no selected Base object. - The Job has no selected Base object. - Maximum Z Height @@ -4649,6 +4649,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4690,6 +4690,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4739,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +4999,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ar.ts b/src/Mod/Path/Gui/Resources/translations/Path_ar.ts index f1aa90945b..f92b84b3d4 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ar.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ar.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - - Stop index(angle) for rotational scan - Stop index(angle) for rotational scan - - - - Dropcutter lines are created parallel to this axis. - Dropcutter lines are created parallel to this axis. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Should the operation be limited by the stock object or by the bounding box of the base object - - - Additional offset to the selected bounding box - Additional offset to the selected bounding box - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Enable optimization which removes unnecessary points from G-Code output + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - The model will be rotated around this axis. - The model will be rotated around this axis. - - - - Start index(angle) for rotational scan - Start index(angle) for rotational scan + + Stop index(angle) for rotational scan + Stop index(angle) for rotational scan @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Cut through waste to depth at model edge, releasing the model. + + + Dropcutter lines are created parallel to this axis. + Dropcutter lines are created parallel to this axis. + + + + Additional offset to the selected bounding box + Additional offset to the selected bounding box + + + + The model will be rotated around this axis. + The model will be rotated around this axis. + + + + Start index(angle) for rotational scan + Start index(angle) for rotational scan + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied The path to be copied - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. إزاحة إضافية لتطبيقها على العملية. الاتجاه يعتمد على العملية. + + + The library to use to generate the path + المكتبة ليتم استخدامها لتوليد المسار + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - المكتبة ليتم استخدامها لتوليد المسار + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utils - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - @@ -1980,6 +1980,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3461,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3480,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object المرجو اختيار عنصر مسار + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + العنصر الذي قمت باختياره ليس عبارة عن مسار + + Please select one path object @@ -3977,13 +3984,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - العنصر الذي قمت باختياره ليس عبارة عن مسار - - Path_Inspect @@ -4233,6 +4233,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + The Job has no selected Base object. + Check the path job for common errors @@ -4313,11 +4318,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height - - - The Job has no selected Base object. - The Job has no selected Base object. - Maximum Z Height @@ -4649,6 +4649,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4690,6 +4690,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4739,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +4999,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ca.ts b/src/Mod/Path/Gui/Resources/translations/Path_ca.ts index 8d0ad85f2f..9ca3e3c424 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ca.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ca.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Mostra els objectes de construcció del camí temporal quan el mòdul estiga en mode DEPURACIÓ. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Els valors més petits produeixen una malla més fina i precisa. Els valors més petits augmenten molt el temps de processament. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Els valors més petits produeixen una malla més fina i precisa. Els valors més petits no augmenten massa el temps de processament. - - - - Stop index(angle) for rotational scan - Atura l'índex(angle) per a l'escàner rotacional - - - - Dropcutter lines are created parallel to this axis. - Les línies dropcutter es creen paral·leles a aquest eix. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object En cas que l'operació estiga limitada per l'objecte estoc o pel la caixa contenidora de l'objecte base - - - Additional offset to the selected bounding box - Separació addicional a la caixa contenidora seleccionada - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Activa l'optimització que suprimeixi els punts innecessaris del resultat G-Code + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Els valors més petits produeixen una malla més fina i precisa. Els valors més petits augmenten molt el temps de processament. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Els valors més petits produeixen una malla més fina i precisa. Els valors més petits no augmenten massa el temps de processament. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ La direcció que la trajectòria ha de seguir al voltant de la peça: Pujada (sentit horari) o Convencional(sentit antihorari) - - The model will be rotated around this axis. - El model girarà al voltant d'aquest eix. - - - - Start index(angle) for rotational scan - Inicia l'índex(angle) per a l'escàner rotacional + + Stop index(angle) for rotational scan + Atura l'índex(angle) per a l'escàner rotacional @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Retalla els residus fins al fons en la vora del model, alliberant-lo. + + + Dropcutter lines are created parallel to this axis. + Les línies dropcutter es creen paral·leles a aquest eix. + + + + Additional offset to the selected bounding box + Separació addicional a la caixa contenidora seleccionada + + + + The model will be rotated around this axis. + El model girarà al voltant d'aquest eix. + + + + Start index(angle) for rotational scan + Inicia l'índex(angle) per a l'escàner rotacional + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied El camí que es copia - - - The base geometry of this toolpath - La geometria base d'aquesta trajectòria - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Desplaçament addicional que s'aplica a l'operació. La direcció és dependent de l'operació. + + + The library to use to generate the path + La biblioteca que s'utilitza per a generar el camí + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Marqueu «cert», si s'utilitza compensació de radi de l'eina de tall - - The library to use to generate the path - La biblioteca que s'utilitza per a generar el camí + + The base geometry of this toolpath + La geometria base d'aquesta trajectòria @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - L'angle de tall %.2f no és vàlid, ha de ser >0° i <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° L'angle de tall %.2f no és vàlid, ha de ser <90° i >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + L'angle de tall %.2f no és vàlid, ha de ser >0° i <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ S'ha incrementat fins al valor de dalt. Ignoring non-horizontal Face S'ignora una Cara no horitzontal + + + Face appears misaligned after initial rotation. + La cara es mostra desalineada després de la rotació inicial. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Penseu a alternar la propietat InverteixAngle i tornar a calcular l'operació. + + + + Multiple faces in Base Geometry. + Múltiples cares en la geometria de base. + + + + Depth settings will be applied to all faces. + La configuració de profunditat s'aplicarà a totes les cares. + + + + EnableRotation property is 'Off'. + La propietat ActivaRotació està «desactivada». + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ S'ha incrementat fins al valor de dalt. Utils Útils - - - Face appears misaligned after initial rotation. - La cara es mostra desalineada després de la rotació inicial. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Penseu a alternar la propietat InverteixAngle i tornar a calcular l'operació. - - - - Multiple faces in Base Geometry. - Múltiples cares en la geometria de base. - - - - Depth settings will be applied to all faces. - La configuració de profunditat s'aplicarà a totes les cares. - - - - EnableRotation property is 'Off'. - La propietat ActivaRotació està «desactivada». - @@ -1978,6 +1978,16 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una PathPocket + + + Pocket Shape + Forma de Buidatge + + + + Creates a Path Pocket object from a face or faces + Crea un objecte de Trajectòria de Buidatge des d'una o vàries cares + Normal @@ -2028,16 +2038,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Final depth set below ZMin of face(s) selected. Profunditat final establerta per davall de ZMin de la cara o cares seleccionades. - - - Pocket Shape - Forma de Buidatge - - - - Creates a Path Pocket object from a face or faces - Crea un objecte de Trajectòria de Buidatge des d'una o vàries cares - 3D Pocket @@ -3448,16 +3448,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_Dressup - - - Dress-up - Aspecte - - - - Creates a Path Dess-up object from a selected path - Crea un objecte aspecte del camí a partir d'un camí seleccionat - Please select one path object @@ -3475,6 +3465,16 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Please select a Path object Seleccioneu un objecte camí + + + Dress-up + Aspecte + + + + Creates a Path Dess-up object from a selected path + Crea un objecte aspecte del camí a partir d'un camí seleccionat + Path_DressupAxisMap @@ -3947,6 +3947,12 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Creates a Path Hop object Crea un objecte de tipus salt en el camí + + + The selected object is not a path + + L'objecte seleccionat no és un camí + Please select one path object @@ -3962,12 +3968,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Create Hop Crea un salt - - - The selected object is not a path - - L'objecte seleccionat no és un camí - Path_Inspect @@ -4214,6 +4214,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_Sanity + + + The Job has no selected Base object. + La tasca no té un objecte base seleccionat. + Check the path job for common errors @@ -4294,11 +4299,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Minimum Z Height Alçada mínima de Z - - - The Job has no selected Base object. - La tasca no té un objecte base seleccionat. - Maximum Z Height @@ -4624,6 +4624,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_ToolController + + + Tool Number to Load + Número d'eina per carregar + Add Tool Controller to the Job @@ -4634,11 +4639,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Add Tool Controller Afegeix un controlador d'eina - - - Tool Number to Load - Número d'eina per carregar - Path_ToolTable @@ -4665,6 +4665,12 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Creates a medial line engraving path Crea una línia central de gravat + + + VCarve requires an engraving cutter with CuttingEdgeAngle + L'eina de gravat en V necessita una +punta de tall amb «CuttingEdgeAngle» + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4675,12 +4681,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Engraver Cutting Edge Angle must be < 180 degrees. L'angle de la punta de tall del gravador ha de ser < 180 graus. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - L'eina de gravat en V necessita una -punta de tall amb «CuttingEdgeAngle» - Path_Waterline @@ -4715,11 +4715,56 @@ punta de tall amb «CuttingEdgeAngle» Save toolbit library Desa la llibreria d'eines de bits + + + Tooltable JSON (*.json) + Taula d'eines JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Taula d'eines HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Taula d'eines LinuxCNC (*.tbl) + Open tooltable Obri la taula d'eines + + + Save tooltable + Guarda la taula d'eines + + + + Rename Tooltable + Canvia el nom de la taula d'eines + + + + Enter Name: + Introduïu el nom: + + + + Add New Tool Table + Afegeix una taula d'eines nova + + + + Delete Selected Tool Table + Esborra la taula d'eines seleccionada + + + + Rename Selected Tool Table + Canvia el nom de la taula d'eines seleccionada + Tooltable editor @@ -4930,11 +4975,6 @@ punta de tall amb «CuttingEdgeAngle» Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Taula d'eines XML (*.xml);;Taula d'eines HeeksCAD (*.tooltable) - - - Save tooltable - Guarda la taula d'eines - Tooltable XML (*.xml) @@ -4950,46 +4990,6 @@ punta de tall amb «CuttingEdgeAngle» Object doesn't have a tooltable property L'objecte no té la propietat de taula d'eines - - - Rename Tooltable - Canvia el nom de la taula d'eines - - - - Enter Name: - Introduïu el nom: - - - - Add New Tool Table - Afegeix una taula d'eines nova - - - - Delete Selected Tool Table - Esborra la taula d'eines seleccionada - - - - Rename Selected Tool Table - Canvia el nom de la taula d'eines seleccionada - - - - Tooltable JSON (*.json) - Taula d'eines JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Taula d'eines HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Taula d'eines LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_cs.qm b/src/Mod/Path/Gui/Resources/translations/Path_cs.qm index ae09f7be42..70353a4089 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_cs.qm and b/src/Mod/Path/Gui/Resources/translations/Path_cs.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_cs.ts b/src/Mod/Path/Gui/Resources/translations/Path_cs.ts index 53f4f6f3db..1511c979bb 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_cs.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_cs.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Zobrazit dočasnou cestu konstrukčních objektů když je modul v režimu LADĚNÍ. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Menší hodnoty přinášejí jemnější a přesnější síť. Menší hodnoty zvyšují čas zpracování. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Menší hodnoty přinášejí jemnější a přesnější síť. Menší hodnoty nezvyšují čas zpracování. - - - - Stop index(angle) for rotational scan - Zastavit indexování (úhel) pro rotační skenování - - - - Dropcutter lines are created parallel to this axis. - Řádky Dropcutter jsou vytvořeny paralelně s touto osou. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Pokud je operace omezena objektem polotovaru nebo ohraničeným objektem základního objektu - - - Additional offset to the selected bounding box - Dodatečný ofset vybraného ohraničovacího kvádru - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Enable optimization which removes unnecessary points from G-Code output + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Menší hodnoty přinášejí jemnější a přesnější síť. Menší hodnoty zvyšují čas zpracování. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Menší hodnoty přinášejí jemnější a přesnější síť. Menší hodnoty nezvyšují čas zpracování. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - The model will be rotated around this axis. - Model bude rotován kolem této osy. - - - - Start index(angle) for rotational scan - Začít indexování (úhel) pro rotační skenování + + Stop index(angle) for rotational scan + Zastavit indexování (úhel) pro rotační skenování @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Cut through waste to depth at model edge, releasing the model. + + + Dropcutter lines are created parallel to this axis. + Řádky Dropcutter jsou vytvořeny paralelně s touto osou. + + + + Additional offset to the selected bounding box + Dodatečný ofset vybraného ohraničovacího kvádru + + + + The model will be rotated around this axis. + Model bude rotován kolem této osy. + + + + Start index(angle) for rotational scan + Začít indexování (úhel) pro rotační skenování + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied Cesta ke kopírování - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -331,7 +326,7 @@ Length or Radius of the approach - Length or Radius of the approach + Délka nebo poloměr přiblížení @@ -346,7 +341,7 @@ Perform plunges with G0 - Perform plunges with G0 + Provést zanoření s G0 @@ -366,22 +361,22 @@ Ramping Method - Ramping Method + Metoda rampování Which feed rate to use for ramping - Which feed rate to use for ramping + Jaký posuv použít pro rampování Custom feedrate - Custom feedrate + Vlastní posuv Custom feed rate - Custom feed rate + Vlastní posuv @@ -401,22 +396,22 @@ Enable pecking - Enable pecking + Povolit výplach The time to dwell between peck cycles - The time to dwell between peck cycles + Doba prodlevy mezi výplachy Enable dwell - Enable dwell + Povolit prodlevu Calculate the tip length and subtract from final depth - Calculate the tip length and subtract from final depth + Vypočítat délku špičky a odečíst od konečné hloubky @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + Knihovna použitá k vytvoření cesty + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - Knihovna použitá k vytvoření cesty + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Vybraný nástroj není vrták - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Zvýšeno na vrch polotovaru. Ignoring non-horizontal Face Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Zvýšeno na vrch polotovaru. Utils Utils - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - @@ -1980,6 +1980,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Tvar kapsy + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Tvar kapsy - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3461,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3480,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3984,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4233,6 +4233,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + The Job has no selected Base object. + Check the path job for common errors @@ -4313,11 +4318,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimální výška Z - - - The Job has no selected Base object. - The Job has no selected Base object. - Maximum Z Height @@ -4649,6 +4649,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Číslo nástroje pro načtení + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Číslo nástroje pro načtení - Path_ToolTable @@ -4690,6 +4690,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4739,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Uložit knihovnu nástrojů + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Otevřít tabulku nástrojů + + + Save tooltable + Uložit tabulku nástrojů + + + + Rename Tooltable + Přejmenovat tabulku nástrojů + + + + Enter Name: + Zadejte jméno: + + + + Add New Tool Table + Přidat novou tabulku nástrojů + + + + Delete Selected Tool Table + Odstranit vybranou tabulku nástrojů + + + + Rename Selected Tool Table + Přejmenovat vybranou tabulku nástrojů + Tooltable editor @@ -4954,11 +4999,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tabulka nástrojů XML (*.xml);;;Tabulka nástrojů HeeksCAD (*.tooltable) - - - Save tooltable - Uložit tabulku nástrojů - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Přejmenovat tabulku nástrojů - - - - Enter Name: - Zadejte jméno: - - - - Add New Tool Table - Přidat novou tabulku nástrojů - - - - Delete Selected Tool Table - Odstranit vybranou tabulku nástrojů - - - - Rename Selected Tool Table - Přejmenovat vybranou tabulku nástrojů - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_de.ts b/src/Mod/Path/Gui/Resources/translations/Path_de.ts index 2a325c9a1f..e81753e99c 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_de.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_de.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Zeigt im DEBUG-Modus den temporären Objekte Pfad-konstruktion. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Kleinere Werte liefern ein feineres, genaueres Netz - bei höherem Rechenaufwand (Cpu). - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Kleinere Werte liefern ein feineres, genaueres Netz. Geringere Werte erhöhen die Verarbeitungszeit unerheblich. - - - - Stop index(angle) for rotational scan - Stopp-Index(Winkel) für Rotationssuche - - - - Dropcutter lines are created parallel to this axis. - Die Dropcutter-Linien werden parallel zu dieser Achse erstellt. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Soll die Operation durch das Grundobjekt oder durch die Begrenzungsbox des Basisobjekts eingeschränkt werden - - - Additional offset to the selected bounding box - Zusätzlicher Versatz zur ausgewählten Begrenzungsbox - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Aktivieren Sie die Optimierung, um unnötige Punkte aus der G-Code-Ausgabe zu entfernen + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Kleinere Werte liefern ein feineres, genaueres Netz - bei höherem Rechenaufwand (Cpu). + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Kleinere Werte liefern ein feineres, genaueres Netz. Geringere Werte erhöhen die Verarbeitungszeit unerheblich. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ Umlaufrichtung des Werkzeugs um das Werkstück: Gleichlauf (Uhrzeigersinn) oder Gegenlauf (entgegen des Uhrzeigersinns) - - The model will be rotated around this axis. - Das Modell wird um diese Achse gedreht. - - - - Start index(angle) for rotational scan - Start-Index(Winkel) für Rotationssuche + + Stop index(angle) for rotational scan + Stopp-Index(Winkel) für Rotationssuche @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Schneide durch überschüssiges Material bis zur Werkstückkante, um dieses zu befreien. + + + Dropcutter lines are created parallel to this axis. + Die Dropcutter-Linien werden parallel zu dieser Achse erstellt. + + + + Additional offset to the selected bounding box + Zusätzlicher Versatz zur ausgewählten Begrenzungsbox + + + + The model will be rotated around this axis. + Das Modell wird um diese Achse gedreht. + + + + Start index(angle) for rotational scan + Start-Index(Winkel) für Rotationssuche + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied Der zu kopierende Pfad - - - The base geometry of this toolpath - Die Basis-Geometrie dieses Werkzeugweges - The tool controller that will be used to calculate the path @@ -565,6 +560,11 @@ nur unwesentlich. Extra offset to apply to the operation. Direction is operation dependent. Zusätzlicher Versatz der auf die Operation angewendet wird. Richtung ist abhängig von der Operation. + + + The library to use to generate the path + Algorithmus zum berechnen des Werkzeugweges + Start pocketing at center or boundary @@ -706,9 +706,9 @@ nur unwesentlich. Auf Wahr setzen, wenn die Fräser-Radiuskompensation verwendet werden soll - - The library to use to generate the path - Algorithmus zum berechnen des Werkzeugweges + + The base geometry of this toolpath + Die Basis-Geometrie dieses Werkzeugweges @@ -988,16 +988,16 @@ nur unwesentlich. Selected tool is not a drill Ausgewähltes Werkzeug ist kein Bohrer - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ungültiger Schneidenwinkel %.2f muß >0° und <= 180° sein - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Ungültiger Schneidenwinkel %.2f muß < 90° und > = 0° sein + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ungültiger Schneidenwinkel %.2f muß >0° und <= 180° sein + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1160,6 +1160,31 @@ Wurde auf Grundkörperoberseite erhöht. Ignoring non-horizontal Face Benutzt nur Horizontale Flächen oder Kanten + + + Face appears misaligned after initial rotation. + Die Fläche erscheint nach der ersten Rotation falsch ausgerichtet zu sein. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Ziehen Sie in Betracht die Eigenschaft "Umgekehrter Winkel" umzuschalten und berechnen Sie die Operation neu. + + + + Multiple faces in Base Geometry. + Mehrere Oberflächen in der Basisgeometrie. + + + + Depth settings will be applied to all faces. + Tiefeneinstellungen werden auf alle Teilflächen angewendet. + + + + EnableRotation property is 'Off'. + Die Eigenschaft "Rotation zulassen" ist deaktiviert. + Unable to create path for face(s). @@ -1225,31 +1250,6 @@ Wurde auf Grundkörperoberseite erhöht. Utils Werkzeuge - - - Face appears misaligned after initial rotation. - Die Fläche erscheint nach der ersten Rotation falsch ausgerichtet zu sein. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Ziehen Sie in Betracht die Eigenschaft "Umgekehrter Winkel" umzuschalten und berechnen Sie die Operation neu. - - - - Multiple faces in Base Geometry. - Mehrere Oberflächen in der Basisgeometrie. - - - - Depth settings will be applied to all faces. - Tiefeneinstellungen werden auf alle Teilflächen angewendet. - - - - EnableRotation property is 'Off'. - Die Eigenschaft "Rotation zulassen" ist deaktiviert. - @@ -1981,6 +1981,16 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b PathPocket + + + Pocket Shape + Taschenform + + + + Creates a Path Pocket object from a face or faces + Erstellt ein Bewegungsbahn Taschen-Objekt von einer oder mehreren Flächen + Normal @@ -2031,16 +2041,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Final depth set below ZMin of face(s) selected. Gesamttiefe unter ZMin von Fläche(n) ausgewählt. - - - Pocket Shape - Taschenform - - - - Creates a Path Pocket object from a face or faces - Erstellt ein Bewegungsbahn Taschen-Objekt von einer oder mehreren Flächen - 3D Pocket @@ -3454,16 +3454,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Path_Dressup - - - Dress-up - Erweiterung - - - - Creates a Path Dess-up object from a selected path - Erzeugt eine Erweiterung für die ausgewählte Bewegungsbahn - Please select one path object @@ -3483,6 +3473,16 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Please select a Path object Bitte wählen Sie ein Pfadobjekt + + + Dress-up + Erweiterung + + + + Creates a Path Dess-up object from a selected path + Erzeugt eine Erweiterung für die ausgewählte Bewegungsbahn + Path_DressupAxisMap @@ -3955,6 +3955,13 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Creates a Path Hop object Erzeugt ein Bewegungsbahn Sprung Objekt + + + The selected object is not a path + + Das ausgewählte Objekt ist keine Bewegungsbahn + + Please select one path object @@ -3970,13 +3977,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Create Hop Erzeuge Sprung - - - The selected object is not a path - - Das ausgewählte Objekt ist keine Bewegungsbahn - - Path_Inspect @@ -4226,6 +4226,11 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Path_Sanity + + + The Job has no selected Base object. + Dem Job wurde kein Basisobjekt zugeordnet. + Check the path job for common errors @@ -4306,11 +4311,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Minimum Z Height Minimale Z-Höhe - - - The Job has no selected Base object. - Dem Job wurde kein Basisobjekt zugeordnet. - Maximum Z Height @@ -4636,6 +4636,11 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Path_ToolController + + + Tool Number to Load + Lade Werkzeugnummer + Add Tool Controller to the Job @@ -4646,11 +4651,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Add Tool Controller Werkzeug Kontroller bearbeiten - - - Tool Number to Load - Lade Werkzeugnummer - Path_ToolTable @@ -4677,6 +4677,11 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Creates a medial line engraving path Erstellt einen medialen Liniengravurpfad + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve benötigt ein Gravurmesser mit Schneitkantenwinkel + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4687,11 +4692,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Engraver Cutting Edge Angle must be < 180 degrees. Gravur Schneitkantenwinkel muss < 180 Grad sein. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve benötigt ein Gravurmesser mit Schneitkantenwinkel - Path_Waterline @@ -4726,11 +4726,56 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Save toolbit library Werkzeugbibliothek speichern + + + Tooltable JSON (*.json) + Werkzeugtabelle JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD Werkzeugtabelle (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC Werkzeugtabelle (*.tbl) + Open tooltable Werkzeugtabelle öffnen + + + Save tooltable + Werkzeugtabelle speichern + + + + Rename Tooltable + Werkzeugtabelle umbenennen + + + + Enter Name: + Name eingeben: + + + + Add New Tool Table + Neue Werkzeugtabelle hinzufügen + + + + Delete Selected Tool Table + Ausgewählte Werkzeugtabelle löschen + + + + Rename Selected Tool Table + Ausgewählte Werkzeugtabelle umbenennen + Tooltable editor @@ -4941,11 +4986,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Werkzeugtabelle XML (XML); HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Werkzeugtabelle speichern - Tooltable XML (*.xml) @@ -4961,46 +5001,6 @@ Wenn es notwendig ist, die endgültige Tiefe manuell einzustellen, wählen Sie b Object doesn't have a tooltable property Objekt besitzt keine Eigenschaft "Werkzeugtabelle" - - - Rename Tooltable - Werkzeugtabelle umbenennen - - - - Enter Name: - Name eingeben: - - - - Add New Tool Table - Neue Werkzeugtabelle hinzufügen - - - - Delete Selected Tool Table - Ausgewählte Werkzeugtabelle löschen - - - - Rename Selected Tool Table - Ausgewählte Werkzeugtabelle umbenennen - - - - Tooltable JSON (*.json) - Werkzeugtabelle JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD Werkzeugtabelle (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC Werkzeugtabelle (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_el.ts b/src/Mod/Path/Gui/Resources/translations/Path_el.ts index 43efbd4491..0ec30bca80 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_el.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_el.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - - Stop index(angle) for rotational scan - Stop index(angle) for rotational scan - - - - Dropcutter lines are created parallel to this axis. - Dropcutter lines are created parallel to this axis. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Should the operation be limited by the stock object or by the bounding box of the base object - - - Additional offset to the selected bounding box - Additional offset to the selected bounding box - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Enable optimization which removes unnecessary points from G-Code output + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - The model will be rotated around this axis. - The model will be rotated around this axis. - - - - Start index(angle) for rotational scan - Start index(angle) for rotational scan + + Stop index(angle) for rotational scan + Stop index(angle) for rotational scan @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Cut through waste to depth at model edge, releasing the model. + + + Dropcutter lines are created parallel to this axis. + Dropcutter lines are created parallel to this axis. + + + + Additional offset to the selected bounding box + Additional offset to the selected bounding box + + + + The model will be rotated around this axis. + The model will be rotated around this axis. + + + + Start index(angle) for rotational scan + Start index(angle) for rotational scan + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied Η διαδρομή προς αντιγραφή - - - The base geometry of this toolpath - Η γεωμετρία βάσης αυτής της διαδρομής εργαλείων - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Επιπλέον μετατόπιση για την υποβολή αίτησης για τη διαδικασία. Η κατεύθυνση εξαρτάται από τη λειτουργία. + + + The library to use to generate the path + Η βιβλιοθήκη προς χρήση για την δημιουργία διαδρομής + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - Η βιβλιοθήκη προς χρήση για την δημιουργία διαδρομής + + The base geometry of this toolpath + Η γεωμετρία βάσης αυτής της διαδρομής εργαλείων @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Μη Έγκυρη Γωνία Περικοπής Ακμής %.2f, πρέπει να είναι <90° και >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utils - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - @@ -1980,6 +1980,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Σχήμα Εσοχής + + + + Creates a Path Pocket object from a face or faces + Δημιουργεί μια Εσοχή Διαδρομής από μια όψη ή από όψεις + Normal @@ -2030,16 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Σχήμα Εσοχής - - - - Creates a Path Pocket object from a face or faces - Δημιουργεί μια Εσοχή Διαδρομής από μια όψη ή από όψεις - 3D Pocket @@ -3461,16 +3461,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Αναδιαμόρφωση - - - - Creates a Path Dess-up object from a selected path - Δημιουργεί ένα αντικείμενο Αναδιαμόρφωσης Διαδρομής από μια επιλεγμένη διαδρομή - Please select one path object @@ -3490,6 +3480,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Παρακαλώ επιλέξτε ένα αντικείμενο Διαδρομής + + + Dress-up + Αναδιαμόρφωση + + + + Creates a Path Dess-up object from a selected path + Δημιουργεί ένα αντικείμενο Αναδιαμόρφωσης Διαδρομής από μια επιλεγμένη διαδρομή + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Δημιουργεί μια Διαδρομή Άλματος + + + The selected object is not a path + + Το επιλεγμένο αντικείμενο δεν είναι διαδρομή + + Please select one path object @@ -3977,13 +3984,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Δημιουργήστε Άλμα - - - The selected object is not a path - - Το επιλεγμένο αντικείμενο δεν είναι διαδρομή - - Path_Inspect @@ -4233,6 +4233,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + Η εργασία δεν έχει κανένα επιλεγμένο αντικείμενο Βάσης. + Check the path job for common errors @@ -4313,11 +4318,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height - - - The Job has no selected Base object. - Η εργασία δεν έχει κανένα επιλεγμένο αντικείμενο Βάσης. - Maximum Z Height @@ -4649,6 +4649,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Αριθμός Εργαλείου προς Φόρτωση + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Προσθέστε Ελεγκτή Εργαλείων - - - Tool Number to Load - Αριθμός Εργαλείου προς Φόρτωση - Path_ToolTable @@ -4690,6 +4690,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4739,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Πίνακας εργαλείων JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Πίνακας εργαλείων HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Πίνακας εργαλείων LinuxCNC (*.tbl) + Open tooltable Άνοιγμα πίνακα εργαλείων + + + Save tooltable + Αποθήκευση πίνακα εργαλείων + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +4999,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Πίνακας εργαλείων XML (*.xml);; Πίνακας εργαλείων HeeksCAD (*.tooltable) - - - Save tooltable - Αποθήκευση πίνακα εργαλείων - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Το αντικείμενο δεν έχει κάποια ιδιότητα πίνακα εργαλείων - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Πίνακας εργαλείων JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Πίνακας εργαλείων HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Πίνακας εργαλείων LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts index 99bc2c08df..5d4426dad3 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_es-ES.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Mostrar los objetos temporales de construcción de rutas cuando el módulo está en modo DEBUG. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Los valores más pequeños producen una malla más fina y precisa. Los valores más pequeños incrementan mucho el tiempo de procesamiento. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Los valores más pequeños producen una malla más fina y precisa. Los valores más pequeños no aumentan mucho el tiempo de procesamiento. - - - - Stop index(angle) for rotational scan - Detener índice(ángulo) para el escaneo rotativo - - - - Dropcutter lines are created parallel to this axis. - Las líneas de corte se crean paralelas a este eje. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object En caso de que la operación esté limitada por el objeto de stock o por el cuadro delimitador del objeto base - - - Additional offset to the selected bounding box - Desplazamiento adicional al cuadro delimitador seleccionado - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Habilitar la optimización que elimina puntos innecesarios del resultado de G-Code + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Los valores más pequeños producen una malla más fina y precisa. Los valores más pequeños incrementan mucho el tiempo de procesamiento. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Los valores más pequeños producen una malla más fina y precisa. Los valores más pequeños no aumentan mucho el tiempo de procesamiento. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ La dirección que la trayectoria de la herramienta debería recorrer por la pieza: Climb(sentido horario) o Conventional(sentido antihorario) - - The model will be rotated around this axis. - El modelo será rotado alrededor de este eje. - - - - Start index(angle) for rotational scan - Iniciar índice(ángulo) para el escaneo rotativo + + Stop index(angle) for rotational scan + Detener índice(ángulo) para el escaneo rotativo @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Cortar a través de los residuos a profundidad en el borde del modelo, liberando el modelo. + + + Dropcutter lines are created parallel to this axis. + Las líneas de corte se crean paralelas a este eje. + + + + Additional offset to the selected bounding box + Desplazamiento adicional al cuadro delimitador seleccionado + + + + The model will be rotated around this axis. + El modelo será rotado alrededor de este eje. + + + + Start index(angle) for rotational scan + Iniciar índice(ángulo) para el escaneo rotativo + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied La trayectoria a ser copiada - - - The base geometry of this toolpath - La geometría base de esta trayectoria de herramienta - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Desfase extra para aplicar a la operación. La dirección es dependiente de la operación. + + + The library to use to generate the path + La biblioteca a usar para generar la trayectoria + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Hacer verdadero, sí se utiliza la compensación de cortador de radio - - The library to use to generate the path - La biblioteca a usar para generar la trayectoria + + The base geometry of this toolpath + La geometría base de esta trayectoria de herramienta @@ -986,16 +986,16 @@ Selected tool is not a drill La herramienta seleccionada no es un taladro - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ángulo del borde de corte no válido %.2f, Debe ser >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Angulo de esquina de corte inválido %.2f, debe ser <90º y >=0º + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ángulo del borde de corte no válido %.2f, Debe ser >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Aumenta hasta el valor superior. Ignoring non-horizontal Face Ignorar cara no horizontal + + + Face appears misaligned after initial rotation. + La cara parece estar mal alineada después de la rotación inicial. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Considere alternar la propiedad 'InverseAngle' y volver a calcular. + + + + Multiple faces in Base Geometry. + Multiples caras en Geometría Base. + + + + Depth settings will be applied to all faces. + La configuración de profundidad se aplicará a todas las caras. + + + + EnableRotation property is 'Off'. + La Propiedad ActivarRotacion es 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Aumenta hasta el valor superior. Utils Utilidades - - - Face appears misaligned after initial rotation. - La cara parece estar mal alineada después de la rotación inicial. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Considere alternar la propiedad 'InverseAngle' y volver a calcular. - - - - Multiple faces in Base Geometry. - Multiples caras en Geometría Base. - - - - Depth settings will be applied to all faces. - La configuración de profundidad se aplicará a todas las caras. - - - - EnableRotation property is 'Off'. - La Propiedad ActivarRotacion es 'Off'. - @@ -1979,6 +1979,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Forma de Vaciado + + + + Creates a Path Pocket object from a face or faces + Crea la trayectoria de un objeto de vaciado desde una cara o caras + Normal @@ -2029,16 +2039,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Profundidad final por debajo de ZMin de la(s) cara(s) seleccionada(s). - - - Pocket Shape - Forma de Vaciado - - - - Creates a Path Pocket object from a face or faces - Crea la trayectoria de un objeto de vaciado desde una cara o caras - 3D Pocket @@ -3460,16 +3460,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Disfrazar - - - - Creates a Path Dess-up object from a selected path - Crea un objeto Dress-up de ruta con la trayectoria seleccionada - Please select one path object @@ -3489,6 +3479,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Por favor seleccione un objeto de trayectoria + + + Dress-up + Disfrazar + + + + Creates a Path Dess-up object from a selected path + Crea un objeto Dress-up de ruta con la trayectoria seleccionada + Path_DressupAxisMap @@ -3961,6 +3961,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Crea un objeto de salto de trayectoria + + + The selected object is not a path + + El objeto seleccionado no es una trayectoria + + Please select one path object @@ -3976,13 +3983,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Crear Salto - - - The selected object is not a path - - El objeto seleccionado no es una trayectoria - - Path_Inspect @@ -4232,6 +4232,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + El trabajo no tiene objeto base seleccionado. + Check the path job for common errors @@ -4312,11 +4317,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Altura mínima de Z - - - The Job has no selected Base object. - El trabajo no tiene objeto base seleccionado. - Maximum Z Height @@ -4648,6 +4648,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Número de herramienta a carga + Add Tool Controller to the Job @@ -4658,11 +4663,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Añadir Controlador de Herramienta - - - Tool Number to Load - Número de herramienta a carga - Path_ToolTable @@ -4689,6 +4689,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Crea una ruta de grabado de línea medial + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requiere una cortadora de grabado con CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4699,11 +4704,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Angulo de borde de corte del grabador debe ser < 180 grados. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requiere una cortadora de grabado con CuttingEdgeAngle - Path_Waterline @@ -4738,11 +4738,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Guardar librería "toolbit" + + + Tooltable JSON (*.json) + Tabla de herramientas JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Tabla de herramientas HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Tabla de herramientas LinuxCNC (*.tbl) + Open tooltable Abierta mesa de herramientas + + + Save tooltable + Guardar mesa de herramienta + + + + Rename Tooltable + Renombrar Tabla de Herramientas + + + + Enter Name: + Introducir nombre: + + + + Add New Tool Table + Añadir nueva tabla de herramientas + + + + Delete Selected Tool Table + Eliminar Tabla de Herramientas Seleccionada + + + + Rename Selected Tool Table + Renombrar Tabla de Herramientas Seleccionada + Tooltable editor @@ -4953,11 +4998,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Mesa de herramientas XML (*.xml);;mesa de herramientas HeeksCAD (*.tooltable) - - - Save tooltable - Guardar mesa de herramienta - Tooltable XML (*.xml) @@ -4973,46 +5013,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property El Objeto no tiene una propiedad de mesa de herramienta - - - Rename Tooltable - Renombrar Tabla de Herramientas - - - - Enter Name: - Introducir nombre: - - - - Add New Tool Table - Añadir nueva tabla de herramientas - - - - Delete Selected Tool Table - Eliminar Tabla de Herramientas Seleccionada - - - - Rename Selected Tool Table - Renombrar Tabla de Herramientas Seleccionada - - - - Tooltable JSON (*.json) - Tabla de herramientas JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Tabla de herramientas HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Tabla de herramientas LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_eu.ts b/src/Mod/Path/Gui/Resources/translations/Path_eu.ts index 63f02d6240..8071fae3e2 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_eu.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_eu.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Erakutsi aldi baterako bide-eraikuntzaren objektuak modulua ARAZKETA moduan dagoenean. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Balio txikiagoek amaraun estuago eta zehatzagoa sortzen dute. Balio txikiagoek prozesatze-denbora asko handitzen dute. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Balio txikiagoek amaraun estuago eta zehatzagoa sortzen dute. Balio txikiagoek ez dute prozesatze-denbora asko handitzen. - - - - Stop index(angle) for rotational scan - Gelditzeko indizea (angelua) biraketa-eskaneatzerako - - - - Dropcutter lines are created parallel to this axis. - Erortze-ebakigailuaren lerroak ardatz honen paraleloan sortzen dira. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Eragiketa objektu gordinak ala oinarri-objektuaren muga-kutxak mugatuko duen - - - Additional offset to the selected bounding box - Hautatutako muga-kutxaren desplazamendu gehigarria - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Gaitu optimizazioa, beharrezkoak ez diren puntuak G-Code irteeratik kentzeko + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Balio txikiagoek amaraun estuago eta zehatzagoa sortzen dute. Balio txikiagoek prozesatze-denbora asko handitzen dute. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Balio txikiagoek amaraun estuago eta zehatzagoa sortzen dute. Balio txikiagoek ez dute prozesatze-denbora asko handitzen. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ Tresna-bideak piezaren inguruan izan behar duen norabidea: erlojuaren noranzkoan edo aurka - - The model will be rotated around this axis. - Eredua ardatz honen inguruan biratuko da. - - - - Start index(angle) for rotational scan - Abiarazteko indizea (angelua) biraketa-eskaneatzerako + + Stop index(angle) for rotational scan + Gelditzeko indizea (angelua) biraketa-eskaneatzerako @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Moztu gehiegizko materiala ereduaren ertzeraino, eredua garbitzeko. + + + Dropcutter lines are created parallel to this axis. + Erortze-ebakigailuaren lerroak ardatz honen paraleloan sortzen dira. + + + + Additional offset to the selected bounding box + Hautatutako muga-kutxaren desplazamendu gehigarria + + + + The model will be rotated around this axis. + Eredua ardatz honen inguruan biratuko da. + + + + Start index(angle) for rotational scan + Abiarazteko indizea (angelua) biraketa-eskaneatzerako + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied Kopiatuko den bidea - - - The base geometry of this toolpath - Tresna-bide honen oinarri-geometria - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Eragiketari aplikatuko zaion desplazamendu gehigarria. Norabidea eragiketaren menpekoa da. + + + The library to use to generate the path + Bidea sortzeko erabiliko den liburutegia + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Markatu 'Egia', ebakigailuaren erradio-konpentsazioa erabili nahi bada - - The library to use to generate the path - Bidea sortzeko erabiliko den liburutegia + + The base geometry of this toolpath + Tresna-bide honen oinarri-geometria @@ -986,16 +986,16 @@ Selected tool is not a drill Hautatutako tresna ez da zulagailua - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Mozte-ertzaren angelu baliogabea (%.2f), >0° and <=180° artekoa izan behar du - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Mozte-ertzaren angelu baliogabea %.2f, izan behar du <90° eta >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Mozte-ertzaren angelu baliogabea (%.2f), >0° and <=180° artekoa izan behar du + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Pieza gordinaren goialdera handitua. Ignoring non-horizontal Face Horizontala ez den aurpegiari ez ikusiarena egiten + + + Face appears misaligned after initial rotation. + Badirudi aurpegia gaizki lerrokatuta dagoela hasierako biraketaren ondoren. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Kontuan hartu alderantzizko angeluaren propietatea txandakatu eta birkalkulatu ahal dela. + + + + Multiple faces in Base Geometry. + Aurpegi anitz oinarri-geometrian. + + + + Depth settings will be applied to all faces. + Sakonera-ezarpenak aurpegi guztiei aplikatuko zaizkie. + + + + EnableRotation property is 'Off'. + Biraketa gaitzeko propietatea desaktibatuta dago. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Pieza gordinaren goialdera handitua. Utils Utilitateak - - - Face appears misaligned after initial rotation. - Badirudi aurpegia gaizki lerrokatuta dagoela hasierako biraketaren ondoren. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Kontuan hartu alderantzizko angeluaren propietatea txandakatu eta birkalkulatu ahal dela. - - - - Multiple faces in Base Geometry. - Aurpegi anitz oinarri-geometrian. - - - - Depth settings will be applied to all faces. - Sakonera-ezarpenak aurpegi guztiei aplikatuko zaizkie. - - - - EnableRotation property is 'Off'. - Biraketa gaitzeko propietatea desaktibatuta dago. - @@ -1977,6 +1977,16 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat PathPocket + + + Pocket Shape + Poltsa-forma + + + + Creates a Path Pocket object from a face or faces + Bide-poltsa bat sortzen du aurpegi batetik edo batzuetatik + Normal @@ -2027,16 +2037,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Final depth set below ZMin of face(s) selected. Azken sakonera hautatutako aurpegi(ar)en ZMin azpitik ezarrita. - - - Pocket Shape - Poltsa-forma - - - - Creates a Path Pocket object from a face or faces - Bide-poltsa bat sortzen du aurpegi batetik edo batzuetatik - 3D Pocket @@ -3458,16 +3458,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Path_Dressup - - - Dress-up - Jantzi - - - - Creates a Path Dess-up object from a selected path - Bideak janzteko objektu bat sortzen du hautatutako bide bat erabiliz - Please select one path object @@ -3487,6 +3477,16 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Please select a Path object Hautatu bide-objektu bat + + + Dress-up + Jantzi + + + + Creates a Path Dess-up object from a selected path + Bideak janzteko objektu bat sortzen du hautatutako bide bat erabiliz + Path_DressupAxisMap @@ -3959,6 +3959,13 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Creates a Path Hop object Bide-jauziko objektu bat sortzen du + + + The selected object is not a path + + Hautatutako objektua ez da bide bat + + Please select one path object @@ -3974,13 +3981,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Create Hop Sortu jauzia - - - The selected object is not a path - - Hautatutako objektua ez da bide bat - - Path_Inspect @@ -4230,6 +4230,11 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Path_Sanity + + + The Job has no selected Base object. + Lanak ez du hautatutako oinarri-objekturik. + Check the path job for common errors @@ -4310,11 +4315,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Minimum Z Height Z altuera minimoa - - - The Job has no selected Base object. - Lanak ez du hautatutako oinarri-objekturik. - Maximum Z Height @@ -4646,6 +4646,11 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Path_ToolController + + + Tool Number to Load + Kargatuko den tresnaren zenbakia + Add Tool Controller to the Job @@ -4656,11 +4661,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Add Tool Controller Gehitu tresna-kontrolatzailea - - - Tool Number to Load - Kargatuko den tresnaren zenbakia - Path_ToolTable @@ -4687,6 +4687,11 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Creates a medial line engraving path Erdiko lerroko grabatze-bide bat sortzen du + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve aplikazioak CuttingEdgeAngle duen grabatze-ebakigailua behar du + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4697,11 +4702,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Engraver Cutting Edge Angle must be < 180 degrees. Grabagailuaren mozte-ertzaren angeluak < 180 gradu izan behar du. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve aplikazioak CuttingEdgeAngle duen grabatze-ebakigailua behar du - Path_Waterline @@ -4736,11 +4736,56 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Save toolbit library Gorde tresna-atalaren liburutegia + + + Tooltable JSON (*.json) + JSON tresna-mahaia (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tresna-mahaia (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tresna-mahaia (*.tbl) + Open tooltable Ireki tresna-mahaia + + + Save tooltable + Gorde tresna-mahaia + + + + Rename Tooltable + Aldatu tresna-mahaiaren izena + + + + Enter Name: + Sartu izena: + + + + Add New Tool Table + Gehitu tresna-mahai berria + + + + Delete Selected Tool Table + Ezabatu hautatutako tresna-mahaia + + + + Rename Selected Tool Table + Aldatu izena hautatutako taula-mahaiari + Tooltable editor @@ -4951,11 +4996,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) XML tresna-mahaia (*.xml);;HeeksCAD tresna-mahaia (*.tooltable) - - - Save tooltable - Gorde tresna-mahaia - Tooltable XML (*.xml) @@ -4971,46 +5011,6 @@ Azken sakonera eskuz ezartzea beharrezkoa bada, hautatu beste eragiketa mota bat Object doesn't have a tooltable property Objektuak ez du tresna-mahai propietate bat - - - Rename Tooltable - Aldatu tresna-mahaiaren izena - - - - Enter Name: - Sartu izena: - - - - Add New Tool Table - Gehitu tresna-mahai berria - - - - Delete Selected Tool Table - Ezabatu hautatutako tresna-mahaia - - - - Rename Selected Tool Table - Aldatu izena hautatutako taula-mahaiari - - - - Tooltable JSON (*.json) - JSON tresna-mahaia (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tresna-mahaia (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tresna-mahaia (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fi.ts b/src/Mod/Path/Gui/Resources/translations/Path_fi.ts index 9a37b37f2a..e623391464 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fi.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fi.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Näytä väliaikaisen polun rakennuskohteet kun moduuli on DEBUG-tilassa. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Pienemmillä arvoilla saadaan hienompi ja tarkempi verkkopinta. Pienemmät arvot lisäävät prosessointiaikaa paljon. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Pienemmillä arvoilla saadaan hienompi ja tarkempi verkkopinta. Pienemmät eivät lisää prosessointiaikaa paljon. - - - - Stop index(angle) for rotational scan - Pysäytä indeksi(kulma) rotaatiokuvausta varten - - - - Dropcutter lines are created parallel to this axis. - Pudotusleikkurin-linjat luodaan rinnakkain tämän akselin kanssa. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Pitääkö toimintoa rajoittaa varaston kohteen mukaan vai peruskohteen rajaavan kehyksen mukaan - - - Additional offset to the selected bounding box - Lisää siirtymä valittuun rajauskehykseen - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Ota käyttöön optimointi, joka poistaa tarpeettomat pisteet G-Code -ulostulosta + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Pienemmillä arvoilla saadaan hienompi ja tarkempi verkkopinta. Pienemmät arvot lisäävät prosessointiaikaa paljon. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Pienemmillä arvoilla saadaan hienompi ja tarkempi verkkopinta. Pienemmät eivät lisää prosessointiaikaa paljon. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ Suunta, mitä työkalupolun pitäisi kulkea osan ympärillä: kiipeillen (Myötäpäivään) tai tavanomaisen tapaan (Vastapäivään) - - The model will be rotated around this axis. - Mallia käännetään tämän akselin ympärillä. - - - - Start index(angle) for rotational scan - Aloitusindeksi(kulma) rotaatiokuvausta varten + + Stop index(angle) for rotational scan + Pysäytä indeksi(kulma) rotaatiokuvausta varten @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Leikkaa jätteen läpi syvyyteen mallireunassa, jolloin malli vapautuu. + + + Dropcutter lines are created parallel to this axis. + Pudotusleikkurin-linjat luodaan rinnakkain tämän akselin kanssa. + + + + Additional offset to the selected bounding box + Lisää siirtymä valittuun rajauskehykseen + + + + The model will be rotated around this axis. + Mallia käännetään tämän akselin ympärillä. + + + + Start index(angle) for rotational scan + Aloitusindeksi(kulma) rotaatiokuvausta varten + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied The path to be copied - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + The library to use to generate the path + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - The library to use to generate the path + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utils - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - @@ -1980,6 +1980,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3461,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3480,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3984,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4233,6 +4233,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + The Job has no selected Base object. + Check the path job for common errors @@ -4313,11 +4318,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height - - - The Job has no selected Base object. - The Job has no selected Base object. - Maximum Z Height @@ -4649,6 +4649,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Ladattavan työkalun numero + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Ladattavan työkalun numero - Path_ToolTable @@ -4690,6 +4690,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4739,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +4999,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fil.ts b/src/Mod/Path/Gui/Resources/translations/Path_fil.ts index c93aed8fd4..7969f1f20a 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fil.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fil.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - - Stop index(angle) for rotational scan - Stop index(angle) for rotational scan - - - - Dropcutter lines are created parallel to this axis. - Dropcutter lines are created parallel to this axis. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Should the operation be limited by the stock object or by the bounding box of the base object - - - Additional offset to the selected bounding box - Additional offset to the selected bounding box - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Enable optimization which removes unnecessary points from G-Code output + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - The model will be rotated around this axis. - The model will be rotated around this axis. - - - - Start index(angle) for rotational scan - Start index(angle) for rotational scan + + Stop index(angle) for rotational scan + Stop index(angle) for rotational scan @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Cut through waste to depth at model edge, releasing the model. + + + Dropcutter lines are created parallel to this axis. + Dropcutter lines are created parallel to this axis. + + + + Additional offset to the selected bounding box + Additional offset to the selected bounding box + + + + The model will be rotated around this axis. + The model will be rotated around this axis. + + + + Start index(angle) for rotational scan + Start index(angle) for rotational scan + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied Ang landas upang kopyahin - - - The base geometry of this toolpath - Ang base Heometría ng toolpath na ito - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Karagdagang offset na i-aplay sa operasyon. Ang direksyon ay nakadepende sa operasyon. + + + The library to use to generate the path + Ang library na gagamitin para makabuo ng path + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - Ang library na gagamitin para makabuo ng path + + The base geometry of this toolpath + Ang base Heometría ng toolpath na ito @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Hindi valid na Cutting Edge Angle %.2f, dapat ay <90° at >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utils - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - @@ -1980,6 +1980,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Hugis ng Bulsa + + + + Creates a Path Pocket object from a face or faces + Lumilikha ng isang bagay na Bulsang Landas mula sa isang mukha o mga mukha + Normal @@ -2030,16 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Hugis ng Bulsa - - - - Creates a Path Pocket object from a face or faces - Lumilikha ng isang bagay na Bulsang Landas mula sa isang mukha o mga mukha - 3D Pocket @@ -3461,16 +3461,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Bihisan - - - - Creates a Path Dess-up object from a selected path - Lumilikha ng Path Dess-up object mula sa napiling path - Please select one path object @@ -3490,6 +3480,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Mangyaring pumili ng isang Path Object + + + Dress-up + Bihisan + + + + Creates a Path Dess-up object from a selected path + Lumilikha ng Path Dess-up object mula sa napiling path + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Lumilikha ng Path Hop object + + + The selected object is not a path + + Ang napiling object ay hindi isang path + + Please select one path object @@ -3977,13 +3984,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Lumikha ng Hop - - - The selected object is not a path - - Ang napiling object ay hindi isang path - - Path_Inspect @@ -4233,6 +4233,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + The Job has no selected Base object. + Check the path job for common errors @@ -4313,11 +4318,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height - - - The Job has no selected Base object. - The Job has no selected Base object. - Maximum Z Height @@ -4649,6 +4649,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Numero ng tool na i-load + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Magdagdag ng Controller ng Tool - - - Tool Number to Load - Numero ng tool na i-load - Path_ToolTable @@ -4690,6 +4690,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4739,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Buksan ang tooltable + + + Save tooltable + I-save ang tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +4999,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - I-save ang tooltable - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Ang object ay walang tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_fr.ts b/src/Mod/Path/Gui/Resources/translations/Path_fr.ts index 758a3ebea8..dc7d78e24a 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_fr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_fr.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Afficher les objets de construction de chemin temporaire lorsque le module est en mode DEBUG. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - De plus petites valeurs génèrent un maillage plus fin et plus précis. Les plus petites valeurs augmentent considérablement le temps de traitement. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - De plus petites valeurs génèrent un maillage plus fin et plus précis. Les plus petites valeurs n’augmentent pas sensiblement le temps de traitement. - - - - Stop index(angle) for rotational scan - Index(angle) d’arrêt pour le balayage en rotation - - - - Dropcutter lines are created parallel to this axis. - Des lignes de découpe sont créées parallèlement à cet axe. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object L'opération doit-elle être limitée par le brut ou par la boîte englobante de l'objet de base - - - Additional offset to the selected bounding box - Décalage supplémentaire pour la boîte englobante selectionnée - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Activer l'optimisation supprimant les points inutiles du G-Code + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + De plus petites valeurs génèrent un maillage plus fin et plus précis. Les plus petites valeurs augmentent considérablement le temps de traitement. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + De plus petites valeurs génèrent un maillage plus fin et plus précis. Les plus petites valeurs n’augmentent pas sensiblement le temps de traitement. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ Direction que le parcours d’outils doit effectuer autour de la pièce : monter(sens des aiguille d’une montre) ou conventionnel(sens inverse des aiguille d’une montre) - - The model will be rotated around this axis. - Le modèle sera pivoter autour de cet axe. - - - - Start index(angle) for rotational scan - Index(angle) de départ pour le balayage en rotation + + Stop index(angle) for rotational scan + Index(angle) d’arrêt pour le balayage en rotation @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Couper au travers de la chute jusqu’à la profondeur en bordure du modèle, libérant le modèle. + + + Dropcutter lines are created parallel to this axis. + Des lignes de découpe sont créées parallèlement à cet axe. + + + + Additional offset to the selected bounding box + Décalage supplémentaire pour la boîte englobante selectionnée + + + + The model will be rotated around this axis. + Le modèle sera pivoter autour de cet axe. + + + + Start index(angle) for rotational scan + Index(angle) de départ pour le balayage en rotation + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied Le chemin d'accès à copier - - - The base geometry of this toolpath - La géométrie de base du parcours de l'outil - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Décalage supplémentaire à appliquer à l’opération. Direction est opération dépendante. + + + The library to use to generate the path + La bibliothèque à utiliser pour générer la trajectoire + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Marquer « true » si vous utilisez une compensation de rayon de coupe - - The library to use to generate the path - La bibliothèque à utiliser pour générer la trajectoire + + The base geometry of this toolpath + La géométrie de base du parcours de l'outil @@ -986,16 +986,16 @@ Selected tool is not a drill L’outil sélectionné n’est pas une perceuse - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Angle de coupe non valable Angle %.2f, doit être >0 ° et <=180 ° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Angle d'arête de coupe invalide %.2f, doit être entre <90° et >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Angle de coupe non valable Angle %.2f, doit être >0 ° et <=180 ° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Augmenté au dessus du stock. Ignoring non-horizontal Face Ignorer les faces non horizontales + + + Face appears misaligned after initial rotation. + La face semble mal alignée après la rotation initiale. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Envisagez de basculer la propriété 'InverseAngle' et de recalculer. + + + + Multiple faces in Base Geometry. + Faces multiples dans la géométrie de base. + + + + Depth settings will be applied to all faces. + Les paramètres de profondeur seront appliqués à toutes les faces. + + + + EnableRotation property is 'Off'. + La propriété EnableRotation est 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Augmenté au dessus du stock. Utils Utilitaires - - - Face appears misaligned after initial rotation. - La face semble mal alignée après la rotation initiale. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Envisagez de basculer la propriété 'InverseAngle' et de recalculer. - - - - Multiple faces in Base Geometry. - Faces multiples dans la géométrie de base. - - - - Depth settings will be applied to all faces. - Les paramètres de profondeur seront appliqués à toutes les faces. - - - - EnableRotation property is 'Off'. - La propriété EnableRotation est 'Off'. - @@ -1980,6 +1980,16 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un PathPocket + + + Pocket Shape + Forme de poche + + + + Creates a Path Pocket object from a face or faces + Crée un objet poche à partir d'arêtes ou d'une surface + Normal @@ -2030,16 +2040,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Final depth set below ZMin of face(s) selected. Profondeur finale définie sous ZMin de face(s) sélectionnée(s). - - - Pocket Shape - Forme de poche - - - - Creates a Path Pocket object from a face or faces - Crée un objet poche à partir d'arêtes ou d'une surface - 3D Pocket @@ -3460,16 +3460,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Path_Dressup - - - Dress-up - Trajectoire additionnelle - - - - Creates a Path Dess-up object from a selected path - Crée un objet trajectoire additionnel à partir d'un parcours sélectionné - Please select one path object @@ -3489,6 +3479,16 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Please select a Path object Veuillez sélectionner un object parcours + + + Dress-up + Trajectoire additionnelle + + + + Creates a Path Dess-up object from a selected path + Crée un objet trajectoire additionnel à partir d'un parcours sélectionné + Path_DressupAxisMap @@ -3961,6 +3961,13 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Creates a Path Hop object Crée un object saut + + + The selected object is not a path + + L'objet sélectionné n'est pas un parcours + + Please select one path object @@ -3976,13 +3983,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Create Hop Crée un saut - - - The selected object is not a path - - L'objet sélectionné n'est pas un parcours - - Path_Inspect @@ -4232,6 +4232,11 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Path_Sanity + + + The Job has no selected Base object. + La tâche n'a pas d'objet de Base sélectionné. + Check the path job for common errors @@ -4312,11 +4317,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Minimum Z Height Hauteur minimale de Z - - - The Job has no selected Base object. - La tâche n'a pas d'objet de Base sélectionné. - Maximum Z Height @@ -4648,6 +4648,11 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Path_ToolController + + + Tool Number to Load + Numéro d'outil à charger + Add Tool Controller to the Job @@ -4658,11 +4663,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Add Tool Controller Ajouter un contrôleur d'outil - - - Tool Number to Load - Numéro d'outil à charger - Path_ToolTable @@ -4689,6 +4689,11 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Creates a medial line engraving path Crée une ligne médiane de gravure + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve nécessite un outil de gravure avec angle de coupe + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4699,11 +4704,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Engraver Cutting Edge Angle must be < 180 degrees. L'angle de coupe du graveur doit être <180 degrés. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve nécessite un outil de gravure avec angle de coupe - Path_Waterline @@ -4738,11 +4738,56 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Save toolbit library Enregistrer la bibliothèque d'outils + + + Tooltable JSON (*.json) + Table d'outils JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Table d'outils HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Table d'outils LinuxCNC (*.tbl) + Open tooltable Ouvre la table des outils + + + Save tooltable + Enregistrer la table d'outils + + + + Rename Tooltable + Renommer la table d'outils + + + + Enter Name: + Saisir le nom : + + + + Add New Tool Table + Ajouter une nouvelle table d'outils + + + + Delete Selected Tool Table + Supprimer la table des outils sélectionnée + + + + Rename Selected Tool Table + Renommer la table des outils sélectionnée + Tooltable editor @@ -4953,11 +4998,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Table d'outils XML (*.xml);;Table d'outils HeeksCAD (*.tooltable) - - - Save tooltable - Enregistrer la table d'outils - Tooltable XML (*.xml) @@ -4973,46 +5013,6 @@ S'il est nécessaire de fixer FinalDepth manuellement, veuillez sélectionner un Object doesn't have a tooltable property L'objet ne possède pas de propriété d'outil pour être mis dans la table - - - Rename Tooltable - Renommer la table d'outils - - - - Enter Name: - Saisir le nom : - - - - Add New Tool Table - Ajouter une nouvelle table d'outils - - - - Delete Selected Tool Table - Supprimer la table des outils sélectionnée - - - - Rename Selected Tool Table - Renommer la table des outils sélectionnée - - - - Tooltable JSON (*.json) - Table d'outils JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Table d'outils HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Table d'outils LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_gl.ts b/src/Mod/Path/Gui/Resources/translations/Path_gl.ts index 68b770e4f8..678778fafb 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_gl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_gl.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - - Stop index(angle) for rotational scan - Parar índice(ángulo) para dixitalización rotacional - - - - Dropcutter lines are created parallel to this axis. - Dropcutter lines are created parallel to this axis. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object No caso de que a operación estea limitada por obxecto stock ou por carcasa da base do obxecto - - - Additional offset to the selected bounding box - Desprazamento engadido á escolma en carcasa - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Habilitar a optimización que elimina puntos innecesarios de saída dende G-Code + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ A dirección que a traxectoria da ferramenta debe ir ao redor da parte: Climb(ClockWise) ou Conventional(CounterClockWise) - - The model will be rotated around this axis. - O modelo pode rotar ao redor do eixe. - - - - Start index(angle) for rotational scan - Iniciar índice (ángulo) para dixitalización rotacional + + Stop index(angle) for rotational scan + Parar índice(ángulo) para dixitalización rotacional @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Tallar os restos na profundidade no bordo do modelo, liberando o modelo. + + + Dropcutter lines are created parallel to this axis. + Dropcutter lines are created parallel to this axis. + + + + Additional offset to the selected bounding box + Desprazamento engadido á escolma en carcasa + + + + The model will be rotated around this axis. + O modelo pode rotar ao redor do eixe. + + + + Start index(angle) for rotational scan + Iniciar índice (ángulo) para dixitalización rotacional + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied A traxectoria a ser copiada - - - The base geometry of this toolpath - A xeometría base desta traxectoria de ferramenta - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Desfase extra para aplicar a operación. A dirección é dependente da operación. + + + The library to use to generate the path + A libraría a usar para xerar a traxectoria + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Facer verdadeiro, se se usa a compensación de radio de ferramenta - - The library to use to generate the path - A libraría a usar para xerar a traxectoria + + The base geometry of this toolpath + A xeometría base desta traxectoria de ferramenta @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ángulo do Bordo de Tallada non válido %.2f, debe ser >0° e <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Ángulo de corte non válido %.2f, debe ser <90° e >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ángulo do Bordo de Tallada non válido %.2f, debe ser >0° e <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + A face aparece desaliñada despois da rotación inicial. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Considera trocar ao ángulo inverso e volver computar. + + + + Multiple faces in Base Geometry. + Múltiples faces en Xeometría Base. + + + + Depth settings will be applied to all faces. + Os axustes de profundidade serán aplicados a tódalas faces. + + + + EnableRotation property is 'Off'. + A propiedade Activar Rotación está 'Desactivada'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utils - - - Face appears misaligned after initial rotation. - A face aparece desaliñada despois da rotación inicial. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Considera trocar ao ángulo inverso e volver computar. - - - - Multiple faces in Base Geometry. - Múltiples faces en Xeometría Base. - - - - Depth settings will be applied to all faces. - Os axustes de profundidade serán aplicados a tódalas faces. - - - - EnableRotation property is 'Off'. - A propiedade Activar Rotación está 'Desactivada'. - @@ -1980,6 +1980,16 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc PathPocket + + + Pocket Shape + Forma Baleira + + + + Creates a Path Pocket object from a face or faces + Crea un obxecto Traxectoria baleiro dende unha face ou faces + Normal @@ -2030,16 +2040,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Forma Baleira - - - - Creates a Path Pocket object from a face or faces - Crea un obxecto Traxectoria baleiro dende unha face ou faces - 3D Pocket @@ -3461,16 +3461,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Path_Dressup - - - Dress-up - Aspecto - - - - Creates a Path Dess-up object from a selected path - Crea un obxecto aspecto de traxectoria a partir dunha traxectoria escolmada - Please select one path object @@ -3490,6 +3480,16 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Please select a Path object Por favor, escolme un obxecto traxectoria + + + Dress-up + Aspecto + + + + Creates a Path Dess-up object from a selected path + Crea un obxecto aspecto de traxectoria a partir dunha traxectoria escolmada + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Creates a Path Hop object Crea un obxecto salto de traxectoria + + + The selected object is not a path + + O obxecto escollido non é unha traxectoria + + Please select one path object @@ -3977,13 +3984,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Create Hop Crear Salto - - - The selected object is not a path - - O obxecto escollido non é unha traxectoria - - Path_Inspect @@ -4233,6 +4233,11 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Path_Sanity + + + The Job has no selected Base object. + O traballo non ten obxecto Base escolmado. + Check the path job for common errors @@ -4313,11 +4318,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Minimum Z Height Minimum Z Height - - - The Job has no selected Base object. - O traballo non ten obxecto Base escolmado. - Maximum Z Height @@ -4649,6 +4649,11 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Path_ToolController + + + Tool Number to Load + Número de ferramenta a cargar + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Add Tool Controller Engadir Controlador de Ferramenta - - - Tool Number to Load - Número de ferramenta a cargar - Path_ToolTable @@ -4690,6 +4690,11 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4739,56 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Táboa de ferramentas JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Táboa de ferramentas HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Táboa de ferramentas LinuxCNC (*.tbl) + Open tooltable Abrir táboa de ferramentas + + + Save tooltable + Gardar táboa de ferramentas + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +4999,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Táboa de ferramentas XML (*.xml);;táboa de ferramentas HeeksCAD (*.tooltable) - - - Save tooltable - Gardar táboa de ferramentas - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ Se é necesario axustar o xogo FinalDepth manualmente por favor escolma unha opc Object doesn't have a tooltable property O obxecto non ten unha propiedade de táboa de ferramentas - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Táboa de ferramentas JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Táboa de ferramentas HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Táboa de ferramentas LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hr.ts b/src/Mod/Path/Gui/Resources/translations/Path_hr.ts index 1067214538..e217071280 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_hr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_hr.ts @@ -8,27 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Prikažite privremene objekte za izgradnju staza kada je modul u stanju DEBUG moda. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Manje vrijednosti daju finiju i precizniju mrežu. Manje vrijednosti uvelike povećavaju vrijeme obrade. - - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Manje vrijednosti daju finiju i precizniju mrežu. Manje vrijednosti ne povećavaju vrijeme obrade. - - - - Stop index(angle) for rotational scan - Zaustavni indeks (kut) za rotacijsko skeniranje - - - - Dropcutter lines are created parallel to this axis. - Linije spuštajućeg (drop-cutter) glodala stvaraju se paralelno s ovom osi. - The direction along which dropcutter lines are created @@ -39,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Kako operaciju treba ograničiti, kroz objekt osnove ili granični okvir osnovnog objekta - - - Additional offset to the selected bounding box - Dodatni pomak za odabrani granični okvir - Step over percentage of the drop cutter path @@ -64,6 +38,17 @@ Enable optimization which removes unnecessary points from G-Code output Omogući optimizaciju koja uklanja nepotrebne točke iz izvoza G-Koda + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Manje vrijednosti daju finiju i precizniju mrežu. Manje vrijednosti uvelike povećavaju vrijeme obrade. + + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Manje vrijednosti daju finiju i precizniju mrežu. Manje vrijednosti ne povećavaju vrijeme obrade. + The completion mode for the operation: single or multi-pass @@ -75,14 +60,9 @@ Smjer kojim alatna staza treba obilaziti dio: uspon (ClockWise) ili konvencionalni (CounterClockWise) - - The model will be rotated around this axis. - Model će se vrtiti oko ove osi. - - - - Start index(angle) for rotational scan - Početni indeks (kut) za rotacijsko skeniranje + + Stop index(angle) for rotational scan + Zaustavni indeks (kut) za rotacijsko skeniranje @@ -99,6 +79,26 @@ Cut through waste to depth at model edge, releasing the model. Prerežite otpadak do dubine na rubu modela, oslobađajući model. + + + Dropcutter lines are created parallel to this axis. + Linije spuštajućeg (drop-cutter) glodala stvaraju se paralelno s ovom osi. + + + + Additional offset to the selected bounding box + Dodatni pomak za odabrani granični okvir + + + + The model will be rotated around this axis. + Model će se vrtiti oko ove osi. + + + + Start index(angle) for rotational scan + Početni indeks (kut) za rotacijsko skeniranje + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -271,11 +271,6 @@ The path to be copied Put koji treba kopirati - - - The base geometry of this toolpath - Osnovna geometrija ove obrade staze - The tool controller that will be used to calculate the path @@ -618,6 +613,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Dodatni pomak koji se primjenjuje na operaciju. Smjer ovisi o operaciji. + + + The library to use to generate the path + Biblioteka koja se koristiti za generiranje staze + Start pocketing at center or boundary @@ -763,9 +763,9 @@ Postavi na istinito, ako koristite kompenzaciju radijusa glodala - - The library to use to generate the path - Biblioteka koja se koristiti za generiranje staze + + The base geometry of this toolpath + Osnovna geometrija ove obrade staze @@ -1053,16 +1053,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Pogrešan kut rezanja ruba %.2f, mora biti > = 0 ° i <= 180 ° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Pogrešan rub rezanja kut %.2f, mora biti < 90 ° i > = 0 ° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Pogrešan kut rezanja ruba %.2f, mora biti > = 0 ° i <= 180 ° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1251,6 +1251,31 @@ Povećana na vrh osnove. + + + Face appears misaligned after initial rotation. + Lice se čini pogrešno poravnano nakon početne rotacije. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Razmislite o izmjeni svojstva 'Obrnuti Kut' i ponovnom izračunavanju operacije. + + + + Multiple faces in Base Geometry. + Višestruka lica u Osnovnoj Geometriji. + + + + Depth settings will be applied to all faces. + Postavke dubine primijenit će se na sva lica. + + + + EnableRotation property is 'Off'. + Svojstvo Omogući Rotaciju je 'isključeno'. + Unable to create path for face(s). @@ -1318,31 +1343,6 @@ Povećana na vrh osnove. Utils Utils - - - Face appears misaligned after initial rotation. - Lice se čini pogrešno poravnano nakon početne rotacije. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Razmislite o izmjeni svojstva 'Obrnuti Kut' i ponovnom izračunavanju operacije. - - - - Multiple faces in Base Geometry. - Višestruka lica u Osnovnoj Geometriji. - - - - Depth settings will be applied to all faces. - Postavke dubine primijenit će se na sva lica. - - - - EnableRotation property is 'Off'. - Svojstvo Omogući Rotaciju je 'isključeno'. - @@ -2099,6 +2099,16 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr PathPocket + + + Pocket Shape + Oblik Utora + + + + Creates a Path Pocket object from a face or faces + Stvara objekt staze utora iz površine ili površina lica + Normal @@ -2153,16 +2163,6 @@ Ako je potrebno ručno postaviti Krajnju Dubinu (FinalDepth), molim odaberite dr - - - Pocket Shape - Oblik Utora - - - - Creates a Path Pocket object from a face or faces - Stvara objekt staze utora iz površine ili površina lica - 3D Pocket @@ -3702,16 +3702,6 @@ zadana vrijednost = 10,0. Path_Dressup - - - Dress-up - Dress-up (Odjenuti) - - - - Creates a Path Dess-up object from a selected path - Stvara staza objekt Dress-up od odabrane staze - Please select one path object @@ -3731,6 +3721,16 @@ zadana vrijednost = 10,0. Please select a Path object Odaberite objekt staze + + + Dress-up + Dress-up (Odjenuti) + + + + Creates a Path Dess-up object from a selected path + Stvara staza objekt Dress-up od odabrane staze + Path_DressupAxisMap @@ -4209,6 +4209,13 @@ zadana vrijednost = 10,0. Creates a Path Hop object Stvori objekt prijelaza staze + + + The selected object is not a path + + Odabrani objekt nije putanja staze + + Please select one path object @@ -4224,13 +4231,6 @@ zadana vrijednost = 10,0. Create Hop Stvori prijelaz - - - The selected object is not a path - - Odabrani objekt nije putanja staze - - Path_Inspect @@ -4482,6 +4482,11 @@ zadana vrijednost = 10,0. Path_Sanity + + + The Job has no selected Base object. + Zadatak nema odabran osnovni objekt. + Check the path job for common errors @@ -4564,11 +4569,6 @@ zadana vrijednost = 10,0. Minimum Z Height Minimalna Z visina - - - The Job has no selected Base object. - Zadatak nema odabran osnovni objekt. - Maximum Z Height @@ -4910,6 +4910,11 @@ Broj linija Path_ToolController + + + Tool Number to Load + Broj alata koji se koristi + Add Tool Controller to the Job @@ -4920,11 +4925,6 @@ Broj linija Add Tool Controller Dodajte kontroler alata - - - Tool Number to Load - Broj alata koji se koristi - Path_ToolTable @@ -4951,6 +4951,14 @@ Broj linija Creates a medial line engraving path Stvara put gravure po medijalnoj crti + + + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve zahtijeva gravura rezač s +Kutom rezanja ruba + @@ -4963,14 +4971,6 @@ Broj linija Engraver Cutting Edge Angle must be < 180 degrees. Rezni kut ruba graviranja mora biti < 180 stupnjeva. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve zahtijeva gravura rezač s -Kutom rezanja ruba - - - Path_Waterline @@ -5007,11 +5007,56 @@ Kutom rezanja ruba Save toolbit library Spremi biblioteku nastavaka alata + + + Tooltable JSON (*.json) + Tabela alata JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD Tabela alata (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC Tabela alata (*.tbl) + Open tooltable Otvori tabelu alata + + + Save tooltable + Spremi tabelu alata + + + + Rename Tooltable + Preimenuj Tabelu Alata + + + + Enter Name: + Unesite ime: + + + + Add New Tool Table + Dodajte novu tablicu alata + + + + Delete Selected Tool Table + Izbriši odabranu tablicu alata + + + + Rename Selected Tool Table + Preimenuj odabranu tablicu alata + Tooltable editor @@ -5222,11 +5267,6 @@ Kutom rezanja ruba Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tabela alata XML (*.xml);;HeeksCAD tabela alata(*.tooltable) - - - Save tooltable - Spremi tabelu alata - Tooltable XML (*.xml) @@ -5242,46 +5282,6 @@ Kutom rezanja ruba Object doesn't have a tooltable property Objekt nema svojstvo alata stola - - - Rename Tooltable - Preimenuj Tabelu Alata - - - - Enter Name: - Unesite ime: - - - - Add New Tool Table - Dodajte novu tablicu alata - - - - Delete Selected Tool Table - Izbriši odabranu tablicu alata - - - - Rename Selected Tool Table - Preimenuj odabranu tablicu alata - - - - Tooltable JSON (*.json) - Tabela alata JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD Tabela alata (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC Tabela alata (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_hu.ts b/src/Mod/Path/Gui/Resources/translations/Path_hu.ts index b2ede7ba8f..c1158a8da0 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_hu.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_hu.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Az ideiglenes építőobjektumok megjelenítésének útvonala, ha a modul DEBUG módban van. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - A kisebb értékek finomabb, pontosabb hálót eredményeznek. A kisebb értékek jelentősen növelik a feldolgozási időt. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - A kisebb értékek finomabb, pontosabb hálót eredményeznek. A kisebb értékek nem növelik jelentősen a feldolgozási időt. - - - - Stop index(angle) for rotational scan - A körforgó letapogatás végpont indexe (szöge) - - - - Dropcutter lines are created parallel to this axis. - A legördülő vonalak ezzel a tengelyekkel párhuzamosan jönnek létre. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object A műveletet korlátozza az alaptest állomány objektum vagy az alap objektum határolókerete - - - Additional offset to the selected bounding box - További eltolás a kiválasztott határolókerethez - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Engedélyezi az optimalizálást, amely eltávolítja a szükségtelen pontokat a G-kód kimenetéről + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + A kisebb értékek finomabb, pontosabb hálót eredményeznek. A kisebb értékek jelentősen növelik a feldolgozási időt. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + A kisebb értékek finomabb, pontosabb hálót eredményeznek. A kisebb értékek nem növelik jelentősen a feldolgozási időt. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ Szerszámmozgás irányának a tárgy körül kell lennie: Mászó(Óramutató járásával egyező(Cw)) vagy agyományos(Ellentétes(Ccw)) - - The model will be rotated around this axis. - A modellt ezen tengely köröl forgatjuk. - - - - Start index(angle) for rotational scan - A körforgó letapogatás kezdő indexe (szöge) + + Stop index(angle) for rotational scan + A körforgó letapogatás végpont indexe (szöge) @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Átvág a hulladékon a mélységgel a modell élénél, a modell kiadásához. + + + Dropcutter lines are created parallel to this axis. + A legördülő vonalak ezzel a tengelyekkel párhuzamosan jönnek létre. + + + + Additional offset to the selected bounding box + További eltolás a kiválasztott határolókerethez + + + + The model will be rotated around this axis. + A modellt ezen tengely köröl forgatjuk. + + + + Start index(angle) for rotational scan + A körforgó letapogatás kezdő indexe (szöge) + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied A másolni kívánt szerszámpálya útvonal - - - The base geometry of this toolpath - Ennek a szerszámmozgásnak az alapgeometriája - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra eltolása a művelethez. Iránya a függ a művelettől. + + + The library to use to generate the path + Az elérési út létrehozásához használt könyvtár + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Állítsa igazra, ha sugár vágó kompenzációt alkalmaz - - The library to use to generate the path - Az elérési út létrehozásához használt könyvtár + + The base geometry of this toolpath + Ennek a szerszámmozgásnak az alapgeometriája @@ -986,16 +986,16 @@ Selected tool is not a drill A kijelölt eszköz nem fúró - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Érvénytelen forgácsoló él szög %.2f, >0° és <=180° közt kell lennie - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Érvénytelen forgácsoló él szög %.2f, <90° és >=0° közti kell + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Érvénytelen forgácsoló él szög %.2f, >0° és <=180° közt kell lennie + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Az alaptest tetejére emelve. Ignoring non-horizontal Face Nem vízszintes felület figyelmen kívül hagyása + + + Face appears misaligned after initial rotation. + Az felületet a kezdeti forgatás után rosszul igazítja a program. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Fontolja meg a "InverseAngle" tulajdonság és a újraszámítás kapcsolását. + + + + Multiple faces in Base Geometry. + Többszörös felületek az alap geometriában. + + + + Depth settings will be applied to all faces. + A mélységbeállítás mindegyik felületre érvényes lesz. + + + + EnableRotation property is 'Off'. + Az Forgatásbekapcsolás tulajdonság értéke ' Ki '. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Az alaptest tetejére emelve. Utils Munkaeszközök - - - Face appears misaligned after initial rotation. - Az felületet a kezdeti forgatás után rosszul igazítja a program. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Fontolja meg a "InverseAngle" tulajdonság és a újraszámítás kapcsolását. - - - - Multiple faces in Base Geometry. - Többszörös felületek az alap geometriában. - - - - Depth settings will be applied to all faces. - A mélységbeállítás mindegyik felületre érvényes lesz. - - - - EnableRotation property is 'Off'. - Az Forgatásbekapcsolás tulajdonság értéke ' Ki '. - @@ -1980,6 +1980,16 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy PathPocket + + + Pocket Shape + Zseb alakzat + + + + Creates a Path Pocket object from a face or faces + Létrehoz egy szerszámpálya zseb útvonal objektumot egy felületből vagy felületekből + Normal @@ -2030,16 +2040,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Final depth set below ZMin of face(s) selected. A kiválasztott felület(ek) ZMin alatti végső mélysége. - - - Pocket Shape - Zseb alakzat - - - - Creates a Path Pocket object from a face or faces - Létrehoz egy szerszámpálya zseb útvonal objektumot egy felületből vagy felületekből - 3D Pocket @@ -3463,16 +3463,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Path_Dressup - - - Dress-up - Megváltoztatás - - - - Creates a Path Dess-up object from a selected path - Szerszámpálya módosító objektumot hoz létre a kiválasztott útvonalból - Please select one path object @@ -3492,6 +3482,16 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Please select a Path object Kérem válasszon egy pályaútvonal objektumot + + + Dress-up + Megváltoztatás + + + + Creates a Path Dess-up object from a selected path + Szerszámpálya módosító objektumot hoz létre a kiválasztott útvonalból + Path_DressupAxisMap @@ -3964,6 +3964,13 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Creates a Path Hop object Gyorsmenet beszúrása a visszahúzási síkra + + + The selected object is not a path + + A kijelölt objektum nem pálya útvonal + + Please select one path object @@ -3979,13 +3986,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Create Hop Visszahúzási útszakasz hozzáadása - - - The selected object is not a path - - A kijelölt objektum nem pálya útvonal - - Path_Inspect @@ -4235,6 +4235,11 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Path_Sanity + + + The Job has no selected Base object. + A feladatnak nincs kijelölt alap objektuma. + Check the path job for common errors @@ -4315,11 +4320,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Minimum Z Height Minimális Z magasság - - - The Job has no selected Base object. - A feladatnak nincs kijelölt alap objektuma. - Maximum Z Height @@ -4651,6 +4651,11 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Path_ToolController + + + Tool Number to Load + Betöltendő szerszám száma + Add Tool Controller to the Job @@ -4661,11 +4666,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Add Tool Controller Eszköz vezérlő hozzáadása - - - Tool Number to Load - Betöltendő szerszám száma - Path_ToolTable @@ -4692,6 +4692,11 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Creates a medial line engraving path Középvonali gravírozási útvonal létrehozása + + + VCarve requires an engraving cutter with CuttingEdgeAngle + A V-kivágás gravírozást igényel vágás élvágási szöggel + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4702,11 +4707,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Engraver Cutting Edge Angle must be < 180 degrees. A véső vágóélének szöge < 180 fok. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - A V-kivágás gravírozást igényel vágás élvágási szöggel - Path_Waterline @@ -4741,11 +4741,56 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Save toolbit library Szerszámkönyvtár mentése + + + Tooltable JSON (*.json) + Szerszámlista JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD szerszámlista (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC szerszámlista (*.tbl) + Open tooltable Szerszámlista megnyitása + + + Save tooltable + Szerszámlista mentése + + + + Rename Tooltable + Szerszámlista átnevezése + + + + Enter Name: + Nevezze el: + + + + Add New Tool Table + Új szerszámlista hozzáadása + + + + Delete Selected Tool Table + Kijelölt szerszámlista törlése + + + + Rename Selected Tool Table + A kijelölt szerszámlista átnevezése + Tooltable editor @@ -4956,11 +5001,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Szerszámlista XML (*.xml);; HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Szerszámlista mentése - Tooltable XML (*.xml) @@ -4976,46 +5016,6 @@ Ha szükséges a Végleges-mélység kézi beállítása, kérem válasszon egy Object doesn't have a tooltable property Objektum nem rendelkezik szerszámlista tulajdonsággal - - - Rename Tooltable - Szerszámlista átnevezése - - - - Enter Name: - Nevezze el: - - - - Add New Tool Table - Új szerszámlista hozzáadása - - - - Delete Selected Tool Table - Kijelölt szerszámlista törlése - - - - Rename Selected Tool Table - A kijelölt szerszámlista átnevezése - - - - Tooltable JSON (*.json) - Szerszámlista JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD szerszámlista (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC szerszámlista (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_id.ts b/src/Mod/Path/Gui/Resources/translations/Path_id.ts index 7e66960b46..e101fdfc36 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_id.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_id.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - - Stop index(angle) for rotational scan - Stop index(angle) for rotational scan - - - - Dropcutter lines are created parallel to this axis. - Dropcutter lines are created parallel to this axis. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Should the operation be limited by the stock object or by the bounding box of the base object - - - Additional offset to the selected bounding box - Additional offset to the selected bounding box - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Enable optimization which removes unnecessary points from G-Code output + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - The model will be rotated around this axis. - The model will be rotated around this axis. - - - - Start index(angle) for rotational scan - Start index(angle) for rotational scan + + Stop index(angle) for rotational scan + Stop index(angle) for rotational scan @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Cut through waste to depth at model edge, releasing the model. + + + Dropcutter lines are created parallel to this axis. + Dropcutter lines are created parallel to this axis. + + + + Additional offset to the selected bounding box + Additional offset to the selected bounding box + + + + The model will be rotated around this axis. + The model will be rotated around this axis. + + + + Start index(angle) for rotational scan + Start index(angle) for rotational scan + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied The path yang akan disalin - - - The base geometry of this toolpath - Geometri dasar dari toolpath ini - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset untuk diterapkan pada operasi. Arah adalah tergantung operasi. + + + The library to use to generate the path + The perpustakaan untuk menggunakan untuk menghasilkan jalan + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - The perpustakaan untuk menggunakan untuk menghasilkan jalan + + The base geometry of this toolpath + Geometri dasar dari toolpath ini @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Sudut Cutting Edge tidak benar%.2f, harus <90° dan>=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utils - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - @@ -1977,6 +1977,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2027,16 +2037,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3457,16 +3457,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Membuat Jalur Dess-up objek dari suatu dipilih jalan - Please select one path object @@ -3484,6 +3474,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Silahkan pilih objek Path + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Membuat Jalur Dess-up objek dari suatu dipilih jalan + Path_DressupAxisMap @@ -3956,6 +3956,12 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Membuat Jalur Hop objek + + + The selected object is not a path + + The dipilih objek bukan jalan + Please select one path object @@ -3971,12 +3977,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Buat Hop - - - The selected object is not a path - - The dipilih objek bukan jalan - Path_Inspect @@ -4227,6 +4227,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + The Job has no selected Base object. + Check the path job for common errors @@ -4307,11 +4312,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height - - - The Job has no selected Base object. - The Job has no selected Base object. - Maximum Z Height @@ -4641,6 +4641,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4651,11 +4656,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Tambahkan Alat Pengontrol - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4682,6 +4682,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4692,11 +4697,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4731,11 +4731,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Tooltable LinuxCNC (*.tbl) + Open tooltable Buka tooltable + + + Save tooltable + Simpan tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4946,11 +4991,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (* .xml) ;, HeeksCAD tooltable (* .tooltable) - - - Save tooltable - Simpan tooltable - Tooltable XML (*.xml) @@ -4966,46 +5006,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Objek tidak memiliki properti tooltable - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Tooltable LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_it.ts b/src/Mod/Path/Gui/Resources/translations/Path_it.ts index 73d68d6d0b..9a06b0f536 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_it.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_it.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Mostra gli oggetti di costruzione dei percorsi temporanei quando il modulo è in modalità DEBUG. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Valori più piccoli producono una maglia più fine e precisa. Valori più piccoli incrementano molto il tempo di elaborazione. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Valori più piccoli producono una maglia più fine e precisa. Valori più piccoli non aumentano di molto il tempo di elaborazione. - - - - Stop index(angle) for rotational scan - Indice di arresto (angolo) per la scansione rotazionale - - - - Dropcutter lines are created parallel to this axis. - Le linee di taglio sono create parallele a questo asse. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object L'operazione dovrebbe essere delimitata dall'oggetto grezzo o dal riquadro di delimitazione dell'oggetto di base - - - Additional offset to the selected bounding box - Offset aggiuntivo al riquadro di selezione scelto - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Abilita l'ottimizzazione che rimuove i punti non necessari dall'output G-Code + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Valori più piccoli producono una maglia più fine e precisa. Valori più piccoli incrementano molto il tempo di elaborazione. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Valori più piccoli producono una maglia più fine e precisa. Valori più piccoli non aumentano di molto il tempo di elaborazione. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ La direzione percorsa dall'utensile intorno alla parte: CW se in senso orario o CCW se in senso antiorario - - The model will be rotated around this axis. - Il modello sarà ruotato attorno a questo asse. - - - - Start index(angle) for rotational scan - Avvia indice (angolo) per la scansione di rotazione + + Stop index(angle) for rotational scan + Indice di arresto (angolo) per la scansione rotazionale @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Taglia lo scarto alla profondità a bordo modello, liberando il modello. + + + Dropcutter lines are created parallel to this axis. + Le linee di taglio sono create parallele a questo asse. + + + + Additional offset to the selected bounding box + Offset aggiuntivo al riquadro di selezione scelto + + + + The model will be rotated around this axis. + Il modello sarà ruotato attorno a questo asse. + + + + Start index(angle) for rotational scan + Avvia indice (angolo) per la scansione di rotazione + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied Il percorso da copiare - - - The base geometry of this toolpath - La geometria di base del percorso di questo utensile - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Scostamento extra da applicare all'operazione. La direzione è dipendente dall'operazione. + + + The library to use to generate the path + La libreria da utilizzare per generare il percorso + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Rendere vero (True), se si utilizza la compensazione raggio utensile - - The library to use to generate the path - La libreria da utilizzare per generare il percorso + + The base geometry of this toolpath + La geometria di base del percorso di questo utensile @@ -986,16 +986,16 @@ Selected tool is not a drill L'utensile selezionato non è una punta di foratura - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Angolo di taglio di %.2f non valido, deve essere compreso tra >0° e <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Angolo di taglio di %.2f invalido, deve essere compreso fra <90° e >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Angolo di taglio di %.2f non valido, deve essere compreso tra >0° e <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Aumentata fino all'altezza del pezzo grezzo. Ignoring non-horizontal Face Ignora faccia non orizzontale + + + Face appears misaligned after initial rotation. + La faccia appare disallineata dopo la rotazione iniziale. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Considerare di attivare/disattivare la proprietà 'InverseAngle' e ricalcolare. + + + + Multiple faces in Base Geometry. + Più facce nella Geometria di base. + + + + Depth settings will be applied to all faces. + Le impostazioni di Profondità saranno applicate a tutte le facce. + + + + EnableRotation property is 'Off'. + La proprietà EnableRotation è 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Aumentata fino all'altezza del pezzo grezzo. Utils Utilità - - - Face appears misaligned after initial rotation. - La faccia appare disallineata dopo la rotazione iniziale. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Considerare di attivare/disattivare la proprietà 'InverseAngle' e ricalcolare. - - - - Multiple faces in Base Geometry. - Più facce nella Geometria di base. - - - - Depth settings will be applied to all faces. - Le impostazioni di Profondità saranno applicate a tutte le facce. - - - - EnableRotation property is 'Off'. - La proprietà EnableRotation è 'Off'. - @@ -1979,6 +1979,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Tasca + + + + Creates a Path Pocket object from a face or faces + Crea un oggetto percorso Tasca da una o più facce + Normal @@ -2029,16 +2039,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Profondità finale impostata sotto ZMin delle facce selezionate. - - - Pocket Shape - Tasca - - - - Creates a Path Pocket object from a face or faces - Crea un oggetto percorso Tasca da una o più facce - 3D Pocket @@ -3460,16 +3460,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Replica - - - - Creates a Path Dess-up object from a selected path - Crea un oggetto Replica modificabile del percorso selezionato - Please select one path object @@ -3489,6 +3479,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Si prega di selezionare un oggetto Percorso + + + Dress-up + Replica + + + + Creates a Path Dess-up object from a selected path + Crea un oggetto Replica modificabile del percorso selezionato + Path_DressupAxisMap @@ -3961,6 +3961,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Crea un oggetto percorso Salto + + + The selected object is not a path + + L'oggetto selezionato non è un percorso + + Please select one path object @@ -3976,13 +3983,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Crea Salto - - - The selected object is not a path - - L'oggetto selezionato non è un percorso - - Path_Inspect @@ -4232,6 +4232,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + La lavorazione non ha un oggetto base selezionato. + Check the path job for common errors @@ -4312,11 +4317,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Altezza Z Minima - - - The Job has no selected Base object. - La lavorazione non ha un oggetto base selezionato. - Maximum Z Height @@ -4648,6 +4648,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Carica utensile + Add Tool Controller to the Job @@ -4658,11 +4663,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Aggiungi un Controllo utensile - - - Tool Number to Load - Carica utensile - Path_ToolTable @@ -4689,6 +4689,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Crea un tracciato di incisione a linea mediale + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve richiede un cutter per incisione con Taglio Laterale Angolare + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4699,11 +4704,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. L'angolo di taglio del cutter per incisione deve essere < 180 gradi. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve richiede un cutter per incisione con Taglio Laterale Angolare - Path_Waterline @@ -4738,11 +4738,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Salva la libreria utensili + + + Tooltable JSON (*.json) + Tabella degli utensili JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Tabella degli utensili HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Tabella degli utensili LinuxCNC (*.tbl) + Open tooltable Apri la tabella utensili + + + Save tooltable + Salva la tabella utensili + + + + Rename Tooltable + Rinomina la tabella utensili + + + + Enter Name: + Inserire il nome: + + + + Add New Tool Table + Aggiungi nuova tabella utensili + + + + Delete Selected Tool Table + Elimina la tabella degli utensili selezionata + + + + Rename Selected Tool Table + Rinomina la tabella degli utensili selezionati + Tooltable editor @@ -4953,11 +4998,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tabella utensili XML (XML); Tabella utensili HeeksCAD (*.tooltable) - - - Save tooltable - Salva la tabella utensili - Tooltable XML (*.xml) @@ -4973,46 +5013,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property L'oggetto non ha le proprietà necessarie per la tabella utensili - - - Rename Tooltable - Rinomina la tabella utensili - - - - Enter Name: - Inserire il nome: - - - - Add New Tool Table - Aggiungi nuova tabella utensili - - - - Delete Selected Tool Table - Elimina la tabella degli utensili selezionata - - - - Rename Selected Tool Table - Rinomina la tabella degli utensili selezionati - - - - Tooltable JSON (*.json) - Tabella degli utensili JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Tabella degli utensili HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Tabella degli utensili LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ja.ts b/src/Mod/Path/Gui/Resources/translations/Path_ja.ts index e6ee285e81..d4adf85de5 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ja.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ja.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. モジュールがDEBUGモード時に、一時パス、構築オブジェクトを表示します。 - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - 値を小さくすると、より細かく、より正確なメッシュとなります。小さい値にするほと、処理時間が大幅に増加します。 - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - 値を小さくすると、より細かく、より正確なメッシュとなります。小さい値にしても、処理時間はそれほど大幅に増加しません。 - - - - Stop index(angle) for rotational scan - 回転スキャンの停止インデックス（角度） - - - - Dropcutter lines are created parallel to this axis. - ドロップカッターラインは、この軸と平行に作成されます。 - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object この工程はストックオブジェクト、またはベースオブジェクトのバウンディングボックスによって制限を受けます - - - Additional offset to the selected bounding box - 選択肢したバウンディングボックスへの追加オフセット - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output 最適化を有効に設定すると、G-Code出力から不必要な点を削除します + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + 値を小さくすると、より細かく、より正確なメッシュとなります。小さい値にするほと、処理時間が大幅に増加します。 + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + 値を小さくすると、より細かく、より正確なメッシュとなります。小さい値にしても、処理時間はそれほど大幅に増加しません。 + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ ツールパスが部品の周りを移動する時の方向: Climb（時計回り）または Conventional（反時計回り） - - The model will be rotated around this axis. - モデルは、この軸を中心にして回転させます - - - - Start index(angle) for rotational scan - 回転スキャンの開始インデックス（角度） + + Stop index(angle) for rotational scan + 回転スキャンの停止インデックス（角度） @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. モデル端で最低部まで不要部を切り抜き、モデルを解放 + + + Dropcutter lines are created parallel to this axis. + ドロップカッターラインは、この軸と平行に作成されます。 + + + + Additional offset to the selected bounding box + 選択肢したバウンディングボックスへの追加オフセット + + + + The model will be rotated around this axis. + モデルは、この軸を中心にして回転させます + + + + Start index(angle) for rotational scan + 回転スキャンの開始インデックス（角度） + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied コピーするパス - - - The base geometry of this toolpath - このツールパスのベースジオメトリー - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. 工程に適用する追加オフセット。方向は工程に依存して変わります。 + + + The library to use to generate the path + パスの生成に使用するライブラリ + Start pocketing at center or boundary @@ -704,9 +704,9 @@ 工具径補正を使用する場合は True - - The library to use to generate the path - パスの生成に使用するライブラリ + + The base geometry of this toolpath + このツールパスのベースジオメトリー @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - %.2f は、無効な切削角度です。 0°より大きく、かつ180°以下でなければいけません。 - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° %.2fは 無効な切れ刃角です。切れ刃角は <90° and >=0° でなければなりません + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + %.2f は、無効な切削角度です。 0°より大きく、かつ180°以下でなければいけません。 + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face 非水平面を無視 + + + Face appears misaligned after initial rotation. + 初期回転後、面が不整状態になります。 + + + + Consider toggling the 'InverseAngle' property and recomputing. + 「InverseAngle」プロパティを切り替えて、再計算することを検討して下さい。 + + + + Multiple faces in Base Geometry. + ベースジオメトリーの複数面 + + + + Depth settings will be applied to all faces. + 深さの設定を全ての面に適用します + + + + EnableRotation property is 'Off'. + EnableRotation プロパティーが「オフ」になっています。 + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils ユーティリティ - - - Face appears misaligned after initial rotation. - 初期回転後、面が不整状態になります。 - - - - Consider toggling the 'InverseAngle' property and recomputing. - 「InverseAngle」プロパティを切り替えて、再計算することを検討して下さい。 - - - - Multiple faces in Base Geometry. - ベースジオメトリーの複数面 - - - - Depth settings will be applied to all faces. - 深さの設定を全ての面に適用します - - - - EnableRotation property is 'Off'. - EnableRotation プロパティーが「オフ」になっています。 - @@ -1980,6 +1980,16 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 PathPocket + + + Pocket Shape + ポケット形状 + + + + Creates a Path Pocket object from a face or faces + 1面または複数面からパス・ポケット・オブジェクトを作成 + Normal @@ -2030,16 +2040,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - ポケット形状 - - - - Creates a Path Pocket object from a face or faces - 1面または複数面からパス・ポケット・オブジェクトを作成 - 3D Pocket @@ -3461,16 +3461,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Path_Dressup - - - Dress-up - ドレスアップ - - - - Creates a Path Dess-up object from a selected path - 選択したパスからパス・ドレスアップ・オブジェクトを作成 - Please select one path object @@ -3490,6 +3480,16 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Please select a Path object パスオブジェクトを選択して下さい + + + Dress-up + ドレスアップ + + + + Creates a Path Dess-up object from a selected path + 選択したパスからパス・ドレスアップ・オブジェクトを作成 + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Creates a Path Hop object パス・ホップ・オブジェクトを作成 + + + The selected object is not a path + + 選択されたオブジェクトはパスではありません + + Please select one path object @@ -3977,13 +3984,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Create Hop ホップを作成 - - - The selected object is not a path - - 選択されたオブジェクトはパスではありません - - Path_Inspect @@ -4233,6 +4233,11 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Path_Sanity + + + The Job has no selected Base object. + ジョブに選択されたベース オブジェクトがありません。 + Check the path job for common errors @@ -4313,11 +4318,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Minimum Z Height 最小Z高さ - - - The Job has no selected Base object. - ジョブに選択されたベース オブジェクトがありません。 - Maximum Z Height @@ -4649,6 +4649,11 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Path_ToolController + + + Tool Number to Load + 読み込む工具番号 + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Add Tool Controller ツールコントローラーを追加 - - - Tool Number to Load - 読み込む工具番号 - Path_ToolTable @@ -4690,6 +4690,11 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarveにはCuttingEdgeAngleを持つ彫刻加工カッターが必要です + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Engraver Cutting Edge Angle must be < 180 degrees. 彫刻加工の切削エッジ角度は180度未満でなければなりません。 - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarveにはCuttingEdgeAngleを持つ彫刻加工カッターが必要です - Path_Waterline @@ -4739,11 +4739,56 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Save toolbit library ツールビットのライブラリを保存 + + + Tooltable JSON (*.json) + ツールテーブル JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCADツールテーブル (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNCツールテーブル (*.tbl) + Open tooltable ツールテーブルを開く + + + Save tooltable + ツールテーブルを保存 + + + + Rename Tooltable + ツールテーブルの名前を変更 + + + + Enter Name: + 名前を入力: + + + + Add New Tool Table + 新しいツールテーブルを追加 + + + + Delete Selected Tool Table + 選択したツールテーブルを削除 + + + + Rename Selected Tool Table + 選択したツールテーブルの名前を変更 + Tooltable editor @@ -4954,11 +4999,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) ツールテーブルXML (*.xml);HeeksCADツールテーブル (*.tooltable) - - - Save tooltable - ツールテーブルを保存 - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ FinalDepthを手動で設定する必要がある場合は別の操作を選択 Object doesn't have a tooltable property オブジェクトがツールテーブルプロパティを持っていません。 - - - Rename Tooltable - ツールテーブルの名前を変更 - - - - Enter Name: - 名前を入力: - - - - Add New Tool Table - 新しいツールテーブルを追加 - - - - Delete Selected Tool Table - 選択したツールテーブルを削除 - - - - Rename Selected Tool Table - 選択したツールテーブルの名前を変更 - - - - Tooltable JSON (*.json) - ツールテーブル JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCADツールテーブル (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNCツールテーブル (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_kab.ts b/src/Mod/Path/Gui/Resources/translations/Path_kab.ts index ae05de5744..63c1c0e751 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_kab.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_kab.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - - Stop index(angle) for rotational scan - Stop index(angle) for rotational scan - - - - Dropcutter lines are created parallel to this axis. - Dropcutter lines are created parallel to this axis. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Should the operation be limited by the stock object or by the bounding box of the base object - - - Additional offset to the selected bounding box - Additional offset to the selected bounding box - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Enable optimization which removes unnecessary points from G-Code output + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - The model will be rotated around this axis. - The model will be rotated around this axis. - - - - Start index(angle) for rotational scan - Start index(angle) for rotational scan + + Stop index(angle) for rotational scan + Stop index(angle) for rotational scan @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Cut through waste to depth at model edge, releasing the model. + + + Dropcutter lines are created parallel to this axis. + Dropcutter lines are created parallel to this axis. + + + + Additional offset to the selected bounding box + Additional offset to the selected bounding box + + + + The model will be rotated around this axis. + The model will be rotated around this axis. + + + + Start index(angle) for rotational scan + Start index(angle) for rotational scan + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied Le chemin d'accès à copier - - - The base geometry of this toolpath - La géométrie de base du parcours de l'outil - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + The library to use to generate the path + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - The library to use to generate the path + + The base geometry of this toolpath + La géométrie de base du parcours de l'outil @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utils - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - @@ -1980,6 +1980,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3461,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Habillage - - - - Creates a Path Dess-up object from a selected path - Crée un habillage d'une trajectoire sélectionnée - Please select one path object @@ -3490,6 +3480,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Veuillez sélectionner une trajectoire + + + Dress-up + Habillage + + + + Creates a Path Dess-up object from a selected path + Crée un habillage d'une trajectoire sélectionnée + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Crée une trajectoire de saut + + + The selected object is not a path + + L'objet sélectionné n'est pas une trajectoire + + Please select one path object @@ -3977,13 +3984,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Crée un saut - - - The selected object is not a path - - L'objet sélectionné n'est pas une trajectoire - - Path_Inspect @@ -4233,6 +4233,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + The Job has no selected Base object. + Check the path job for common errors @@ -4313,11 +4318,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height - - - The Job has no selected Base object. - The Job has no selected Base object. - Maximum Z Height @@ -4648,6 +4648,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Numéro d'outil à charger + Add Tool Controller to the Job @@ -4658,11 +4663,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Numéro d'outil à charger - Path_ToolTable @@ -4689,6 +4689,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4699,11 +4704,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4738,11 +4738,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Ouvre la table des outils + + + Save tooltable + Enregistrer la table d'outils + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4953,11 +4998,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Table d'outils XML (*.xml);;Table d'outils HeeksCAD (*.tooltable) - - - Save tooltable - Enregistrer la table d'outils - Tooltable XML (*.xml) @@ -4973,46 +5013,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property L'objet ne possède pas de propriété d'outil pour être mis dans la table - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ko.ts b/src/Mod/Path/Gui/Resources/translations/Path_ko.ts index eef9b4e5fd..26e61c66f7 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ko.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ko.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - - Stop index(angle) for rotational scan - Stop index(angle) for rotational scan - - - - Dropcutter lines are created parallel to this axis. - Dropcutter lines are created parallel to this axis. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Should the operation be limited by the stock object or by the bounding box of the base object - - - Additional offset to the selected bounding box - Additional offset to the selected bounding box - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Enable optimization which removes unnecessary points from G-Code output + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - The model will be rotated around this axis. - The model will be rotated around this axis. - - - - Start index(angle) for rotational scan - Start index(angle) for rotational scan + + Stop index(angle) for rotational scan + Stop index(angle) for rotational scan @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Cut through waste to depth at model edge, releasing the model. + + + Dropcutter lines are created parallel to this axis. + Dropcutter lines are created parallel to this axis. + + + + Additional offset to the selected bounding box + Additional offset to the selected bounding box + + + + The model will be rotated around this axis. + The model will be rotated around this axis. + + + + Start index(angle) for rotational scan + Start index(angle) for rotational scan + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied The path to be copied - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + The library to use to generate the path + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - The library to use to generate the path + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utils - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - @@ -1980,6 +1980,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3461,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3480,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3984,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4233,6 +4233,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + The Job has no selected Base object. + Check the path job for common errors @@ -4313,11 +4318,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height - - - The Job has no selected Base object. - The Job has no selected Base object. - Maximum Z Height @@ -4649,6 +4649,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4690,6 +4690,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4739,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable 도구목록 열기 + + + Save tooltable + 도구목록을 저장 + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +4999,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) 도구목록 XML (*.xml); HeeksCAD 도구목록 (*.tooltable) - - - Save tooltable - 도구목록을 저장 - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property 개체가 도구목록 속성을 하지 않습니다. - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_lt.ts b/src/Mod/Path/Gui/Resources/translations/Path_lt.ts index 71df960f74..f07619aec1 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_lt.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_lt.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - - Stop index(angle) for rotational scan - Stop index(angle) for rotational scan - - - - Dropcutter lines are created parallel to this axis. - Dropcutter lines are created parallel to this axis. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Should the operation be limited by the stock object or by the bounding box of the base object - - - Additional offset to the selected bounding box - Additional offset to the selected bounding box - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Enable optimization which removes unnecessary points from G-Code output + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - The model will be rotated around this axis. - The model will be rotated around this axis. - - - - Start index(angle) for rotational scan - Start index(angle) for rotational scan + + Stop index(angle) for rotational scan + Stop index(angle) for rotational scan @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Cut through waste to depth at model edge, releasing the model. + + + Dropcutter lines are created parallel to this axis. + Dropcutter lines are created parallel to this axis. + + + + Additional offset to the selected bounding box + Additional offset to the selected bounding box + + + + The model will be rotated around this axis. + The model will be rotated around this axis. + + + + Start index(angle) for rotational scan + Start index(angle) for rotational scan + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied The path to be copied - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + The library to use to generate the path + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - The library to use to generate the path + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utils - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - @@ -1980,6 +1980,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3461,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3480,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3984,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4233,6 +4233,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + The Job has no selected Base object. + Check the path job for common errors @@ -4313,11 +4318,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height - - - The Job has no selected Base object. - The Job has no selected Base object. - Maximum Z Height @@ -4649,6 +4649,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4690,6 +4690,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4739,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +4999,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_nl.ts b/src/Mod/Path/Gui/Resources/translations/Path_nl.ts index 54124c1bfe..55da3e96f5 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_nl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_nl.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Toon de tijdelijke padconstructie-objecten wanneer de module in DEBUG-modus staat. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Kleinere waarden leveren een fijner, nauwkeuriger mesh op. Kleinere waarden verhogen de verwerkingstijd aanzienlijk. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Kleinere waarden leveren een fijner, nauwkeuriger mesh op. Kleinere waarden verhogen de verwerkingstijd niet aanzienlijk. - - - - Stop index(angle) for rotational scan - Stop index(hoek) voor rotationele scan - - - - Dropcutter lines are created parallel to this axis. - Dropcutterlijnen worden parallel gemaakt met deze as. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Moet de bewerking worden beperkt door het voorraadobject of door de begrenzingsdoos van het basisobject - - - Additional offset to the selected bounding box - Extra verschuiving naar de geselecteerde begrenzingsdoos - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Optimalisatie inschakelen die onnodige punten verwijdert van de G-Code uitvoer + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Kleinere waarden leveren een fijner, nauwkeuriger mesh op. Kleinere waarden verhogen de verwerkingstijd aanzienlijk. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Kleinere waarden leveren een fijner, nauwkeuriger mesh op. Kleinere waarden verhogen de verwerkingstijd niet aanzienlijk. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ De richting die het tool moet volge rond het werkstuk: Climb(met de klok mee) of conventioneel(tegen de klok) - - The model will be rotated around this axis. - Het model zal rond deze as draaien. - - - - Start index(angle) for rotational scan - Start index(hoek) voor rotationele scan + + Stop index(angle) for rotational scan + Stop index(hoek) voor rotationele scan @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Ga door afval naar diepte aan de modelrand, waardoor het model vrijkomt. + + + Dropcutter lines are created parallel to this axis. + Dropcutterlijnen worden parallel gemaakt met deze as. + + + + Additional offset to the selected bounding box + Extra verschuiving naar de geselecteerde begrenzingsdoos + + + + The model will be rotated around this axis. + Het model zal rond deze as draaien. + + + + Start index(angle) for rotational scan + Start index(hoek) voor rotationele scan + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied Het te kopiëren pad - - - The base geometry of this toolpath - De basisgeometrie voor dit gereedschapspad - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra verschuiving om toe te passen op de bewerking. Richting is afhankelijk van bewerking. + + + The library to use to generate the path + De te bibliotheek gebruiken voor het genereren van het pad + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Zet Waar indien u gebruik maakt van de straalcompensatie van de snijder - - The library to use to generate the path - De te bibliotheek gebruiken voor het genereren van het pad + + The base geometry of this toolpath + De basisgeometrie voor dit gereedschapspad @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ongeldige hoek van de snijrand %.2f, moet >=0° en <=180° zijn - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Ongeldige hoek van de snijrand %.2f, moet >=0° en <90° zijn + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ongeldige hoek van de snijrand %.2f, moet >=0° en <=180° zijn + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Toegenomen naar de standaard top. Ignoring non-horizontal Face Negeer niet-horizontaal vlak + + + Face appears misaligned after initial rotation. + Het vlak lijkt verkeerd uitgelijnd te zijn na de eerste rotatie. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Probeer de 'InverseAngle'-eigenschap te veranderen en opnieuw te berekenen. + + + + Multiple faces in Base Geometry. + Meerdere vlakken in de basisgeometrie. + + + + Depth settings will be applied to all faces. + Diepte-instellingen zullen op alle vlakken toegepast worden. + + + + EnableRotation property is 'Off'. + EnableRotation-eigenschap is 'Uit'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Toegenomen naar de standaard top. Utils Hulpmiddelen - - - Face appears misaligned after initial rotation. - Het vlak lijkt verkeerd uitgelijnd te zijn na de eerste rotatie. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Probeer de 'InverseAngle'-eigenschap te veranderen en opnieuw te berekenen. - - - - Multiple faces in Base Geometry. - Meerdere vlakken in de basisgeometrie. - - - - Depth settings will be applied to all faces. - Diepte-instellingen zullen op alle vlakken toegepast worden. - - - - EnableRotation property is 'Off'. - EnableRotation-eigenschap is 'Uit'. - @@ -1980,6 +1980,16 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew PathPocket + + + Pocket Shape + Vorm van de uitsparing + + + + Creates a Path Pocket object from a face or faces + Maakt een object van een paduitsparing aan vanuit een of meerdere vlakken + Normal @@ -2030,16 +2040,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Final depth set below ZMin of face(s) selected. Definitieve diepte ingesteld onder ZMin of vlak(ken) geselecteerd. - - - Pocket Shape - Vorm van de uitsparing - - - - Creates a Path Pocket object from a face or faces - Maakt een object van een paduitsparing aan vanuit een of meerdere vlakken - 3D Pocket @@ -3461,16 +3461,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Path_Dressup - - - Dress-up - Verkleding - - - - Creates a Path Dess-up object from a selected path - Maakt een padverkledingsobject uit een geselecteerd pad - Please select one path object @@ -3490,6 +3480,16 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Please select a Path object Gelieve een padobject te selecteren + + + Dress-up + Verkleding + + + + Creates a Path Dess-up object from a selected path + Maakt een padverkledingsobject uit een geselecteerd pad + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Creates a Path Hop object Maakt een Padsprongobject + + + The selected object is not a path + + Het geselecteerde object is geen pad + + Please select one path object @@ -3977,13 +3984,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Create Hop Sprong maken - - - The selected object is not a path - - Het geselecteerde object is geen pad - - Path_Inspect @@ -4233,6 +4233,11 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Path_Sanity + + + The Job has no selected Base object. + Er is geen geselecteerd basisobject voor de taak. + Check the path job for common errors @@ -4313,11 +4318,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Minimum Z Height Minimale Z-hoogte - - - The Job has no selected Base object. - Er is geen geselecteerd basisobject voor de taak. - Maximum Z Height @@ -4649,6 +4649,11 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Path_ToolController + + + Tool Number to Load + Te laden gereedschapsnummer + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Add Tool Controller Gereedschapsregelaar toevoegen - - - Tool Number to Load - Te laden gereedschapsnummer - Path_ToolTable @@ -4690,6 +4690,11 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Creates a medial line engraving path Maakt een middelste lijn graveer pad + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve vereist een graverende snijder met CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Engraver Cutting Edge Angle must be < 180 degrees. Engraver snij-hoek moet < 180 graden zijn. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve vereist een graverende snijder met CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4739,56 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Save toolbit library Toolbit-bibliotheek opslaan + + + Tooltable JSON (*.json) + Gereedschapstafel JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD-gereedschapstafel (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC-gereedschapstafel (*.tbl) + Open tooltable Open gereedschapstafel + + + Save tooltable + Gereedschapstafel opslaan + + + + Rename Tooltable + Hernoem gereedschapstabel + + + + Enter Name: + Naam invoeren: + + + + Add New Tool Table + Voeg nieuwe gereedschapstabel toe + + + + Delete Selected Tool Table + Verwijder de geselecteerde gereedschapstabel + + + + Rename Selected Tool Table + Hernoem de geselecteerde gereedschapstabel + Tooltable editor @@ -4954,11 +4999,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Gereedschapstafel XML (*.xml);;HeeksCAD-gereedschapstafel (*.tooltable) - - - Save tooltable - Gereedschapstafel opslaan - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ Als het nodig is de FinalDepth handmatig aan te geven, doe dat in een andere bew Object doesn't have a tooltable property Object heeft geen gereedschapstafeleigenschap - - - Rename Tooltable - Hernoem gereedschapstabel - - - - Enter Name: - Naam invoeren: - - - - Add New Tool Table - Voeg nieuwe gereedschapstabel toe - - - - Delete Selected Tool Table - Verwijder de geselecteerde gereedschapstabel - - - - Rename Selected Tool Table - Hernoem de geselecteerde gereedschapstabel - - - - Tooltable JSON (*.json) - Gereedschapstafel JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD-gereedschapstafel (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC-gereedschapstafel (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_no.ts b/src/Mod/Path/Gui/Resources/translations/Path_no.ts index 2b6689ab2b..0abccf10bb 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_no.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_no.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - - Stop index(angle) for rotational scan - Stop index(angle) for rotational scan - - - - Dropcutter lines are created parallel to this axis. - Dropcutter lines are created parallel to this axis. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Should the operation be limited by the stock object or by the bounding box of the base object - - - Additional offset to the selected bounding box - Additional offset to the selected bounding box - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Enable optimization which removes unnecessary points from G-Code output + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - The model will be rotated around this axis. - The model will be rotated around this axis. - - - - Start index(angle) for rotational scan - Start index(angle) for rotational scan + + Stop index(angle) for rotational scan + Stop index(angle) for rotational scan @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Cut through waste to depth at model edge, releasing the model. + + + Dropcutter lines are created parallel to this axis. + Dropcutter lines are created parallel to this axis. + + + + Additional offset to the selected bounding box + Additional offset to the selected bounding box + + + + The model will be rotated around this axis. + The model will be rotated around this axis. + + + + Start index(angle) for rotational scan + Start index(angle) for rotational scan + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied The path to be copied - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + The library to use to generate the path + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - The library to use to generate the path + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utils - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - @@ -1980,6 +1980,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3461,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3480,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3984,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4233,6 +4233,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + The Job has no selected Base object. + Check the path job for common errors @@ -4313,11 +4318,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height - - - The Job has no selected Base object. - The Job has no selected Base object. - Maximum Z Height @@ -4649,6 +4649,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4690,6 +4690,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4739,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +4999,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pl.qm b/src/Mod/Path/Gui/Resources/translations/Path_pl.qm index 1b0a77b01b..07aa5cd8b6 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_pl.qm and b/src/Mod/Path/Gui/Resources/translations/Path_pl.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pl.ts b/src/Mod/Path/Gui/Resources/translations/Path_pl.ts index e6ec2f43b2..401384aafa 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pl.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Pokaż tymczasowe obiekty konstrukcyjne ścieżki, gdy moduł jest w trybie DEBUGOWANIA. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Mniejsze wartości dają drobniejszą i dokładniejszą siatkę. Mniejsze wartości znacznie wydłużają czas przetwarzania. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Mniejsze wartości dają drobniejszą i dokładniejszą siatkę. Mniejsze wartości nie zwiększają znacznie czasu przetwarzania. - - - - Stop index(angle) for rotational scan - Indeks końcowy (kąt) dla skanowania obrotowego - - - - Dropcutter lines are created parallel to this axis. - Linie frezowania wgłębnego są równoległe do tej osi. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Czy operacja ma być ograniczona przez obiekt podstawowy czy przez ramkę obrysu obiektu bazowego - - - Additional offset to the selected bounding box - Dodatkowe przesunięcie do wybranej ramki zaznaczenia - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Włącz optymalizację która usuwa nie potrzebne punkty z G-Code + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Mniejsze wartości dają drobniejszą i dokładniejszą siatkę. Mniejsze wartości znacznie wydłużają czas przetwarzania. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Mniejsze wartości dają drobniejszą i dokładniejszą siatkę. Mniejsze wartości nie zwiększają znacznie czasu przetwarzania. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ Kierunek, w którym ścieżka narzędzia powinna przechodzić wokół części: współbieżnie (zgodnie z ruchem wskazówek zegara) lub przeciwbieżnie (przeciwnie do ruchu wskazówek zegara) - - The model will be rotated around this axis. - Model będzie obracany wokół tej osi. - - - - Start index(angle) for rotational scan - Indeks początkowy (kąt) dla skanowania obrotowego + + Stop index(angle) for rotational scan + Indeks końcowy (kąt) dla skanowania obrotowego @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Odetnij odpad ne krawędzi modelu by uwolnić model. + + + Dropcutter lines are created parallel to this axis. + Linie frezowania wgłębnego są równoległe do tej osi. + + + + Additional offset to the selected bounding box + Dodatkowe przesunięcie do wybranej ramki zaznaczenia + + + + The model will be rotated around this axis. + Model będzie obracany wokół tej osi. + + + + Start index(angle) for rotational scan + Indeks początkowy (kąt) dla skanowania obrotowego + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -244,11 +244,6 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. The path to be copied Ścieżka do skopiowania - - - The base geometry of this toolpath - Podstawowa geometria tej ścieżki narzędzia - The tool controller that will be used to calculate the path @@ -564,6 +559,11 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. Extra offset to apply to the operation. Direction is operation dependent. Dodatkowy offset do operacji. Kierunek jest zależny od operacji. + + + The library to use to generate the path + Biblioteka używana do generowania ścieżki + Start pocketing at center or boundary @@ -657,7 +657,7 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. Arrays of paths having different tool controllers are handled according to the tool controller of the first path. - Tablice ścieżek mające różne kontrolery narzędzi są obsługiwane zgodnie z kontrolerem narzędzia dla pierwszej ścieżki. + Tablice ścieżek zawierające różne kontrolery narzędzi są obsługiwane zgodnie z kontrolerem narzędzia dla pierwszej ścieżki. @@ -705,9 +705,9 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. Ustaw wartość Prawda, jeśli używasz kompensacji promienia frezu - - The library to use to generate the path - Biblioteka używana do generowania ścieżki + + The base geometry of this toolpath + Podstawowa geometria tej ścieżki narzędzia @@ -987,16 +987,16 @@ Obrotowy: Skanowanie obrotowe w 4 osiach. Selected tool is not a drill Wybrane narzędzie nie jest wiertłem - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Nieprawidłowy kąt krawędzi cięcia %.2f, musi być >0° i <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Nieprawidłowy kąt krawędzi tnącej% .2f, musi wynosić <90 ° i> = 0 ° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Nieprawidłowy kąt krawędzi cięcia %.2f, musi być >0° i <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1159,6 +1159,31 @@ Zwiększona do górnej krawędzi materiału. Ignoring non-horizontal Face Ignorowanie niepoziomej ściany + + + Face appears misaligned after initial rotation. + Po wstępnym obrocie ściana wydaje się być nieprawidłowo ustawiona. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Rozważ przełączenie właściwości „Odwrotny kąt” i ponowne obliczenie. + + + + Multiple faces in Base Geometry. + Wiele ścian w geometrii bazowej. + + + + Depth settings will be applied to all faces. + Ustawienia głębokości zostaną zastosowane do wszystkich ścian. + + + + EnableRotation property is 'Off'. + Właściwość Zezwól na obrót jest wyłączona. + Unable to create path for face(s). @@ -1224,31 +1249,6 @@ Zwiększona do górnej krawędzi materiału. Utils Narzędzia - - - Face appears misaligned after initial rotation. - Po wstępnym obrocie ściana wydaje się być nieprawidłowo ustawiona. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Rozważ przełączenie właściwości „Odwrotny kąt” i ponowne obliczenie. - - - - Multiple faces in Base Geometry. - Wiele ścian w geometrii bazowej. - - - - Depth settings will be applied to all faces. - Ustawienia głębokości zostaną zastosowane do wszystkich ścian. - - - - EnableRotation property is 'Off'. - Właściwość Zezwól na obrót jest wyłączona. - @@ -1895,7 +1895,7 @@ Zwiększona do górnej krawędzi materiału. Incremental Step Down of Tool - Przyrostowe krok w dół narzędzia + Przyrostowe obniżanie narzędzia @@ -1979,6 +1979,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Kształt kieszeni + + + + Creates a Path Pocket object from a face or faces + Tworzy obiekt Kierunek ścieżki z twarzy lub twarzy + Normal @@ -2029,16 +2039,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Głębokość końcowa ustawiona poniżej Z min dla wybranej(-ych) powierzchni. - - - Pocket Shape - Kształt kieszeni - - - - Creates a Path Pocket object from a face or faces - Tworzy obiekt Kierunek ścieżki z twarzy lub twarzy - 3D Pocket @@ -3464,16 +3464,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Ulepszenia - - - - Creates a Path Dess-up object from a selected path - Tworzy obiekt ścieżki Dess-up z zaznaczonej ścieżki - Please select one path object @@ -3493,6 +3483,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Proszę wybrać obiekt-ścieżkę + + + Dress-up + Ulepszenia + + + + Creates a Path Dess-up object from a selected path + Tworzy obiekt ścieżki Dess-up z zaznaczonej ścieżki + Path_DressupAxisMap @@ -3965,6 +3965,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Tworzy obiekty Path Hop + + + The selected object is not a path + + Wybrany obiekt nie jest ścieżką + + Please select one path object @@ -3980,13 +3987,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Utwórz skok - - - The selected object is not a path - - Wybrany obiekt nie jest ścieżką - - Path_Inspect @@ -4236,6 +4236,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + Zadanie nie ma wybranego obiektu bazowego. + Check the path job for common errors @@ -4316,11 +4321,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimalna wysokość Z - - - The Job has no selected Base object. - Zadanie nie ma wybranego obiektu bazowego. - Maximum Z Height @@ -4651,6 +4651,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Numer narzędzi do wczytania + Add Tool Controller to the Job @@ -4661,11 +4666,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Dodaj kontroler narzędzi - - - Tool Number to Load - Numer narzędzi do wczytania - Path_ToolTable @@ -4692,6 +4692,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Tworzy ścieżkę grawerowania linii środkowej + + + VCarve requires an engraving cutter with CuttingEdgeAngle + Wycięcie V wymaga frezu do grawerowania z kątem cięcia krawędzi + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4702,11 +4707,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Kąt krawędzi tnącej grawera musi być <180 stopni. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - Wycięcie V wymaga frezu do grawerowania z kątem cięcia krawędzi - Path_Waterline @@ -4741,11 +4741,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Zapisz bibliotekę narzędzi + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Otwórz tabelę narzędziową + + + Save tooltable + Zapisz tabelę narzędziową + + + + Rename Tooltable + Zmień nazwę tabeli narzędzi + + + + Enter Name: + Wprowadź nazwę: + + + + Add New Tool Table + Dodaj nową tabelę narzędzi + + + + Delete Selected Tool Table + Usuń zaznaczoną tabelę narzędzi + + + + Rename Selected Tool Table + Zmień nazwę zaznaczonej tabeli narzędzi + Tooltable editor @@ -4956,11 +5001,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tabela narzędziowa XML (*.xml); tabela HeeksCAD (*.tooltable) - - - Save tooltable - Zapisz tabelę narzędziową - Tooltable XML (*.xml) @@ -4976,46 +5016,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Obiekt nie ma właściwości tooltable - - - Rename Tooltable - Zmień nazwę tabeli narzędzi - - - - Enter Name: - Wprowadź nazwę: - - - - Add New Tool Table - Dodaj nową tabelę narzędzi - - - - Delete Selected Tool Table - Usuń zaznaczoną tabelę narzędzi - - - - Rename Selected Tool Table - Zmień nazwę zaznaczonej tabeli narzędzi - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) @@ -5767,7 +5767,7 @@ If it is necessary to set the FinalDepth manually please select a different oper Incremental Step Down of Tool - Przyrostowe krok w dół narzędzia + Przyrostowe obniżanie narzędzia diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts index c4158f86ad..3358551799 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pt-BR.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Mostra os objetos temporários de construção de trajetória quando o módulo está no modo DEBUG. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Valores menores dão uma malha melhor e mais precisa, mas também aumentam muito o tempo de processamento. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Valores menores produzem uma malha melhor e mais precisa. No entanto, não aumentam muito o tempo de processamento. - - - - Stop index(angle) for rotational scan - Parar índice(ângulo) para a verificação rotativa - - - - Dropcutter lines are created parallel to this axis. - Linhas de Dropcutter são criadas em paralelo a este eixo. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object A operação deve ser limitada pelo objeto das ações ou pela caixa delimitadora do objeto base - - - Additional offset to the selected bounding box - Deslocamento adicional à caixa delimitadora selecionada - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Habilitar otimização que remove pontos desnecessários do G-Code gerado + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Valores menores dão uma malha melhor e mais precisa, mas também aumentam muito o tempo de processamento. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Valores menores produzem uma malha melhor e mais precisa. No entanto, não aumentam muito o tempo de processamento. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ A direção do caminho da ferramenta ao redor da peça deve ser: Sentido horário(CW) ou Sentido anti-horário(CCW) - - The model will be rotated around this axis. - O modelo será girado em torno deste eixo. - - - - Start index(angle) for rotational scan - Iniciar índice(ângulo) para a verificação rotativa + + Stop index(angle) for rotational scan + Parar índice(ângulo) para a verificação rotativa @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Corte os resíduos para profundidade na borda do modelo, libertando o modelo. + + + Dropcutter lines are created parallel to this axis. + Linhas de Dropcutter são criadas em paralelo a este eixo. + + + + Additional offset to the selected bounding box + Deslocamento adicional à caixa delimitadora selecionada + + + + The model will be rotated around this axis. + O modelo será girado em torno deste eixo. + + + + Start index(angle) for rotational scan + Iniciar índice(ângulo) para a verificação rotativa + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied O caminho a ser copiado - - - The base geometry of this toolpath - A geometria base deste caminho de ferramenta - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Deslocamento extra a ser aplicado à operação. A direção depende da operação. + + + The library to use to generate the path + Biblioteca a usar para gerar a trajetória + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Torne verdadeiro, se está usando a compensação do raio do cortador - - The library to use to generate the path - Biblioteca a usar para gerar a trajetória + + The base geometry of this toolpath + A geometria base deste caminho de ferramenta @@ -986,16 +986,16 @@ Selected tool is not a drill A ferramenta selecionada não é uma broca - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ângulo de corte de aresta inválido: %.2f, deve ser >0º e <=180º - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Ângulo de corte de esquina %.2f inválido, deve ser <90º e >=0º + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ângulo de corte de aresta inválido: %.2f, deve ser >0º e <=180º + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Aumentando para o topo do estoque. Ignoring non-horizontal Face Ignorando faces não-horizontais + + + Face appears misaligned after initial rotation. + A face parece desalinhada após a rotação inicial. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Considere alternar a propriedade 'InverseAngle' e recalcular. + + + + Multiple faces in Base Geometry. + Múltiplas faces na Geometria Base. + + + + Depth settings will be applied to all faces. + Configurações de profundidade serão aplicadas a todas as faces. + + + + EnableRotation property is 'Off'. + A propriedade HabilitarRotação está 'Desligada'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Aumentando para o topo do estoque. Utils Utilidades - - - Face appears misaligned after initial rotation. - A face parece desalinhada após a rotação inicial. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Considere alternar a propriedade 'InverseAngle' e recalcular. - - - - Multiple faces in Base Geometry. - Múltiplas faces na Geometria Base. - - - - Depth settings will be applied to all faces. - Configurações de profundidade serão aplicadas a todas as faces. - - - - EnableRotation property is 'Off'. - A propriedade HabilitarRotação está 'Desligada'. - @@ -1980,6 +1980,16 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci PathPocket + + + Pocket Shape + Forma Vazio (bolso) + + + + Creates a Path Pocket object from a face or faces + Cria uma trajetória de vazio (bolso) de uma face ou faces + Normal @@ -2030,16 +2040,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Final depth set below ZMin of face(s) selected. Profundidade final definida abaixo de ZMin para faces selecionadas. - - - Pocket Shape - Forma Vazio (bolso) - - - - Creates a Path Pocket object from a face or faces - Cria uma trajetória de vazio (bolso) de uma face ou faces - 3D Pocket @@ -3461,16 +3461,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Path_Dressup - - - Dress-up - Trajetória adicional - - - - Creates a Path Dess-up object from a selected path - Cria uma trajetória de vestimento a partir de uma trajetória selecionada - Please select one path object @@ -3490,6 +3480,16 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Please select a Path object Por favor selecione uma trajetória + + + Dress-up + Trajetória adicional + + + + Creates a Path Dess-up object from a selected path + Cria uma trajetória de vestimento a partir de uma trajetória selecionada + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Creates a Path Hop object Cria uma trajetória de salto + + + The selected object is not a path + + O objeto selecionado não é uma trajetória + + Please select one path object @@ -3977,13 +3984,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Create Hop Criar salto - - - The selected object is not a path - - O objeto selecionado não é uma trajetória - - Path_Inspect @@ -4233,6 +4233,11 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Path_Sanity + + + The Job has no selected Base object. + O trabalho não tem nenhum objeto Base selecionado. + Check the path job for common errors @@ -4313,11 +4318,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Minimum Z Height Altura Z mínima - - - The Job has no selected Base object. - O trabalho não tem nenhum objeto Base selecionado. - Maximum Z Height @@ -4649,6 +4649,11 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Path_ToolController + + + Tool Number to Load + Número da ferramenta a carregar + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Add Tool Controller Adicionar controlador de ferramenta - - - Tool Number to Load - Número da ferramenta a carregar - Path_ToolTable @@ -4690,6 +4690,11 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Creates a medial line engraving path Cria uma trajetória de gravação de linha mediana + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requer um cortador de gravura com CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Engraver Cutting Edge Angle must be < 180 degrees. Ângulo de corte da borda deve ser de < 180 graus. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requer um cortador de gravura com CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4739,56 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Save toolbit library Salvar biblioteca de brocas + + + Tooltable JSON (*.json) + Tabela de ferramentas JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Tabela de ferramentas HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Tabela de ferramentas LinuxCNC (*.tbl) + Open tooltable Abrir tabela de ferramentas + + + Save tooltable + Salvar tabela de ferramentas + + + + Rename Tooltable + Renomear tabela de ferramentas + + + + Enter Name: + Digite o Nome: + + + + Add New Tool Table + Adicionar nova tabela de ferramentas + + + + Delete Selected Tool Table + Excluir tabela de ferramentas selecionada + + + + Rename Selected Tool Table + Renomear a tabela de ferramentas selecionada + Tooltable editor @@ -4954,11 +4999,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tabela de ferramentas XML (*.xml);;tabela de ferramentas HeeksCAD (*.tooltable) - - - Save tooltable - Salvar tabela de ferramentas - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ Se for necessário definir a profundidade final (FinalDepth) manualmente, seleci Object doesn't have a tooltable property Objeto não tem uma propriedade da tabela de ferramentas - - - Rename Tooltable - Renomear tabela de ferramentas - - - - Enter Name: - Digite o Nome: - - - - Add New Tool Table - Adicionar nova tabela de ferramentas - - - - Delete Selected Tool Table - Excluir tabela de ferramentas selecionada - - - - Rename Selected Tool Table - Renomear a tabela de ferramentas selecionada - - - - Tooltable JSON (*.json) - Tabela de ferramentas JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Tabela de ferramentas HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Tabela de ferramentas LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts index 679892d1ec..6f20ff2150 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_pt-PT.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Mostra os objetos temporários de construção do caminho quando o módulo está no modo DEBUG. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Valores menores resultam numa malha mais fina e mais precisa. Valores menores aumentam muito o tempo de processamento. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Valores menores resultam numa malha mais fina e mais precisa. Valores menores não aumentam muito o tempo de processamento. - - - - Stop index(angle) for rotational scan - Stop index(angle) for rotational scan - - - - Dropcutter lines are created parallel to this axis. - Dropcutter lines are created parallel to this axis. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Should the operation be limited by the stock object or by the bounding box of the base object - - - Additional offset to the selected bounding box - Additional offset to the selected bounding box - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Habilitar otimização que remove pontos desnecessários do resultado G-Code + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Valores menores resultam numa malha mais fina e mais precisa. Valores menores aumentam muito o tempo de processamento. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Valores menores resultam numa malha mais fina e mais precisa. Valores menores não aumentam muito o tempo de processamento. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - The model will be rotated around this axis. - O modelo será girado em torno deste eixo. - - - - Start index(angle) for rotational scan - Start index(angle) for rotational scan + + Stop index(angle) for rotational scan + Stop index(angle) for rotational scan @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Cut through waste to depth at model edge, releasing the model. + + + Dropcutter lines are created parallel to this axis. + Dropcutter lines are created parallel to this axis. + + + + Additional offset to the selected bounding box + Additional offset to the selected bounding box + + + + The model will be rotated around this axis. + O modelo será girado em torno deste eixo. + + + + Start index(angle) for rotational scan + Start index(angle) for rotational scan + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied O caminho a ser copiado - - - The base geometry of this toolpath - A geometria base deste caminho de ferramenta - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Deslocamento extra para aplicar à operação. Direção é dependente de operação. + + + The library to use to generate the path + Biblioteca a usar para gerar a trajetória + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - Biblioteca a usar para gerar a trajetória + + The base geometry of this toolpath + A geometria base deste caminho de ferramenta @@ -986,16 +986,16 @@ Selected tool is not a drill A ferramenta selecionada não é uma broca - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Ângulo de corte de esquina inválido %.2f, deve ser <90º e >=0º + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignorando Face não-horizontal + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Múltiplas faces na Geometria Base. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utilidades - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Múltiplas faces na Geometria Base. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - @@ -1980,6 +1980,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Forma Vazio (bolso) + + + + Creates a Path Pocket object from a face or faces + Cria uma trajetória de vazio (bolso) de uma face ou faces + Normal @@ -2030,16 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Forma Vazio (bolso) - - - - Creates a Path Pocket object from a face or faces - Cria uma trajetória de vazio (bolso) de uma face ou faces - 3D Pocket @@ -3461,16 +3461,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Cobrir - - - - Creates a Path Dess-up object from a selected path - Cria uma trajetória de cobertura (dress-up) a partir de uma trajetória selecionada - Please select one path object @@ -3490,6 +3480,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Por favor selecione uma trajetória + + + Dress-up + Cobrir + + + + Creates a Path Dess-up object from a selected path + Cria uma trajetória de cobertura (dress-up) a partir de uma trajetória selecionada + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Cria objeto de ressalto da trajetória + + + The selected object is not a path + + O objeto selecionado não é uma trajetória + + Please select one path object @@ -3977,13 +3984,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Criar salto - - - The selected object is not a path - - O objeto selecionado não é uma trajetória - - Path_Inspect @@ -4233,6 +4233,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + O trabalho não tem nenhum objeto Base selecionado. + Check the path job for common errors @@ -4313,11 +4318,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Altura mínima em Z - - - The Job has no selected Base object. - O trabalho não tem nenhum objeto Base selecionado. - Maximum Z Height @@ -4649,6 +4649,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Número da ferramenta a carregar + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Adicionar controlador de ferramenta - - - Tool Number to Load - Número da ferramenta a carregar - Path_ToolTable @@ -4690,6 +4690,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4739,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tabela de ferramentas JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Tabela de ferramentas HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Tabela de ferramentas LinuxCNC (*.tbl) + Open tooltable Abrir tabela de ferramentas + + + Save tooltable + Salvar tabela de ferramentas + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Introduzir Nome: + + + + Add New Tool Table + Adicionar Nova Tabela de Ferramenta + + + + Delete Selected Tool Table + Excluir Tabela de Ferramenta Selecionada + + + + Rename Selected Tool Table + Renomear a Tabela de Ferramenta Selecionada + Tooltable editor @@ -4954,11 +4999,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tabela de ferramentas XML (*.xml);;tabela de ferramentas HeeksCAD (*.tooltable) - - - Save tooltable - Salvar tabela de ferramentas - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Objeto não tem uma propriedade da tabela de ferramentas - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Introduzir Nome: - - - - Add New Tool Table - Adicionar Nova Tabela de Ferramenta - - - - Delete Selected Tool Table - Excluir Tabela de Ferramenta Selecionada - - - - Rename Selected Tool Table - Renomear a Tabela de Ferramenta Selecionada - - - - Tooltable JSON (*.json) - Tabela de ferramentas JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Tabela de ferramentas HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Tabela de ferramentas LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ro.ts b/src/Mod/Path/Gui/Resources/translations/Path_ro.ts index 8456f7fa49..60bf38bc31 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ro.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ro.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - - Stop index(angle) for rotational scan - Stop index(angle) for rotational scan - - - - Dropcutter lines are created parallel to this axis. - Dropcutter lines are created parallel to this axis. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object În cazul în care operațiunea este limitată pentru obiectul stock sau de limitele parlelipipedului obiectului de bză - - - Additional offset to the selected bounding box - Decalarea adițioanală la caseta selectată - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Permite optimizarea care elimină punctele inutile din codul G-Code rezultat + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - The model will be rotated around this axis. - The model will be rotated around this axis. - - - - Start index(angle) for rotational scan - Start index(angle) for rotational scan + + Stop index(angle) for rotational scan + Stop index(angle) for rotational scan @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Cut through waste to depth at model edge, releasing the model. + + + Dropcutter lines are created parallel to this axis. + Dropcutter lines are created parallel to this axis. + + + + Additional offset to the selected bounding box + Decalarea adițioanală la caseta selectată + + + + The model will be rotated around this axis. + The model will be rotated around this axis. + + + + Start index(angle) for rotational scan + Start index(angle) for rotational scan + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied Calea de acces de copiat - - - The base geometry of this toolpath - Geometria bază a traiectoriei sculei - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Se aplică un decalaj suplimentar la operaţiunea. Direcţia este dependentă de operație. + + + The library to use to generate the path + Bibliotecă de utilizat pentru a genera traiectoria + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - Bibliotecă de utilizat pentru a genera traiectoria + + The base geometry of this toolpath + Geometria bază a traiectoriei sculei @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Unghiul muchiei tăietoare este invalid %.2f, trebuie să fie < 90 ° şi > = 0 ° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utils - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - @@ -1980,6 +1980,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Forma de buzunar + + + + Creates a Path Pocket object from a face or faces + Creează un obiect tip buzunar plecând de la muchii sau o suprafață + Normal @@ -2030,16 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Forma de buzunar - - - - Creates a Path Pocket object from a face or faces - Creează un obiect tip buzunar plecând de la muchii sau o suprafață - 3D Pocket @@ -3461,16 +3461,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Traiectorie adițională - - - - Creates a Path Dess-up object from a selected path - Creează un obiect traiectorie adițională plecând de la un parcurs selecționat - Please select one path object @@ -3490,6 +3480,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Vă rugăm să selectaţi un obiect traiecorie + + + Dress-up + Traiectorie adițională + + + + Creates a Path Dess-up object from a selected path + Creează un obiect traiectorie adițională plecând de la un parcurs selecționat + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creează un obiect salt + + + The selected object is not a path + + Obiectul selectat nu este o traiectorie + + Please select one path object @@ -3977,13 +3984,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Creați un salt - - - The selected object is not a path - - Obiectul selectat nu este o traiectorie - - Path_Inspect @@ -4233,6 +4233,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + Sarcina de lucru nu are obiect în Baza selecționată. + Check the path job for common errors @@ -4313,11 +4318,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height - - - The Job has no selected Base object. - Sarcina de lucru nu are obiect în Baza selecționată. - Maximum Z Height @@ -4649,6 +4649,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Numărul uneltei de încărcat + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Adăugare dispozitiv de control a sculei - - - Tool Number to Load - Numărul uneltei de încărcat - Path_ToolTable @@ -4690,6 +4690,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4739,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tabelă de scule JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Tabela de scule HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Tabelă de scule LinuxCNC (*.tbl) + Open tooltable Deschide tabela de scule + + + Save tooltable + Salvarea tabelei de scule + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +4999,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tabela de scule XML (*.xml);Masă de scule HeeksCAD (*.tooltable) - - - Save tooltable - Salvarea tabelei de scule - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Obiectul nu are o proprietate în tabelul de scule - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tabelă de scule JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Tabela de scule HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Tabelă de scule LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ru.qm b/src/Mod/Path/Gui/Resources/translations/Path_ru.qm index e79e093cbd..93f68039a5 100644 Binary files a/src/Mod/Path/Gui/Resources/translations/Path_ru.qm and b/src/Mod/Path/Gui/Resources/translations/Path_ru.qm differ diff --git a/src/Mod/Path/Gui/Resources/translations/Path_ru.ts b/src/Mod/Path/Gui/Resources/translations/Path_ru.ts index 532723e436..234e5006d4 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_ru.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_ru.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Показывать временные path при построении модуля в режиме DEBUG. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Меньшие значения дают бОльшую точность, но существенно увеличивают время обработки. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Меньшие значения дают бОльшую точность, но существенно увеличивают время обработки. - - - - Stop index(angle) for rotational scan - Конечный индекс (угол) для вращающегося сканирования - - - - Dropcutter lines are created parallel to this axis. - Выбросные (Dropcutter) линии создаются параллельно этой оси. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Операция должна быть ограничена заготовкой или ограничительной рамкой базового объекта - - - Additional offset to the selected bounding box - Дополнительное смещение выбранной ограничительной рамки - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Включить оптимизацию, которая удаляет лишние точки из выходного Г-кода (G-Code) + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Меньшие значения дают бОльшую точность, но существенно увеличивают время обработки. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Меньшие значения дают бОльшую точность, но существенно увеличивают время обработки. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ Направление, по которому должен обойти деталь инструмент по часовой стрелке или против часовой стрелки - - The model will be rotated around this axis. - Модель будет вращаться вокруг этой оси. - - - - Start index(angle) for rotational scan - Начальный индекс (угол) для вращающегося сканирования + + Stop index(angle) for rotational scan + Конечный индекс (угол) для вращающегося сканирования @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Резать через отходы до глубины края модели, освобождая модель. + + + Dropcutter lines are created parallel to this axis. + Выбросные (Dropcutter) линии создаются параллельно этой оси. + + + + Additional offset to the selected bounding box + Дополнительное смещение выбранной ограничительной рамки + + + + The model will be rotated around this axis. + Модель будет вращаться вокруг этой оси. + + + + Start index(angle) for rotational scan + Начальный индекс (угол) для вращающегося сканирования + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied Траектория для копирования - - - The base geometry of this toolpath - Базовая фигура для пути инструмента - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Дополнительное смещение применяется к операции. Направление зависит от операции. + + + The library to use to generate the path + Библиотека, используемая для создания траектории + Start pocketing at center or boundary @@ -601,7 +601,7 @@ The path(s) to array - The path(s) to array + Путь (пути) к массиву @@ -611,22 +611,22 @@ The spacing between the array copies in Linear pattern - The spacing between the array copies in Linear pattern + Отступ между копиями массива в линейном шаблоне The number of copies in X direction in Linear pattern - The number of copies in X direction in Linear pattern + Количество копий в направлении X в линейном шаблоне The number of copies in Y direction in Linear pattern - The number of copies in Y direction in Linear pattern + Количество копий в направлении Y в линейном шаблоне Total angle in Polar pattern - Total angle in Polar pattern + Общий угол в полярном шаблоне @@ -704,9 +704,9 @@ Установить в Истину, если используется компенсация радиуса инструмента - - The library to use to generate the path - Библиотека, используемая для создания траектории + + The base geometry of this toolpath + Базовая фигура для пути инструмента @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Неверный угол режущей кромки %.2f, должен быть >0° и <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Недопустимый угол режущей кромки %.2f, должно быть <90° и >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Неверный угол режущей кромки %.2f, должен быть >0° и <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + Грань станет неправильно выравнена после первоначального вращения. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Рассмотрите переключение свойства InverseAngle (инвертировать угол) и повторный пересчет. + + + + Multiple faces in Base Geometry. + Несколько граней в Базовой геометрии. + + + + Depth settings will be applied to all faces. + Настройки глубины будут применены ко всем граням. + + + + EnableRotation property is 'Off'. + Свойство позволить Вращение (EnableRotation) выключено. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utils - - - Face appears misaligned after initial rotation. - Грань станет неправильно выравнена после первоначального вращения. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Рассмотрите переключение свойства InverseAngle (инвертировать угол) и повторный пересчет. - - - - Multiple faces in Base Geometry. - Несколько граней в Базовой геометрии. - - - - Depth settings will be applied to all faces. - Настройки глубины будут применены ко всем граням. - - - - EnableRotation property is 'Off'. - Свойство позволить Вращение (EnableRotation) выключено. - @@ -1979,6 +1979,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Форма кармана + + + + Creates a Path Pocket object from a face or faces + Создаёт Путь обработки кармана используя контур состоящий из рёбер или из грани + Normal @@ -2029,16 +2039,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Конечная глубина ниже заданного ZMin. - - - Pocket Shape - Форма кармана - - - - Creates a Path Pocket object from a face or faces - Создаёт Путь обработки кармана используя контур состоящий из рёбер или из грани - 3D Pocket @@ -3460,16 +3460,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Модифицировать - - - - Creates a Path Dess-up object from a selected path - Создаёт дополнения для выбранной траектории - Please select one path object @@ -3489,6 +3479,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Пожалуйста выберите Путь объект + + + Dress-up + Модифицировать + + + + Creates a Path Dess-up object from a selected path + Создаёт дополнения для выбранной траектории + Path_DressupAxisMap @@ -3961,6 +3961,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Создает объект шага пути + + + The selected object is not a path + + Выделенный объект не является путём + + Please select one path object @@ -3976,13 +3983,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Создать Шаг - - - The selected object is not a path - - Выделенный объект не является путём - - Path_Inspect @@ -4232,6 +4232,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + Задание не имеет выбранного базового объекта. + Check the path job for common errors @@ -4312,11 +4317,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height - - - The Job has no selected Base object. - Задание не имеет выбранного базового объекта. - Maximum Z Height @@ -4648,6 +4648,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Номер инструмента для загрузки + Add Tool Controller to the Job @@ -4658,11 +4663,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Добавить Контроллер Инструмента - - - Tool Number to Load - Номер инструмента для загрузки - Path_ToolTable @@ -4689,6 +4689,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4699,11 +4704,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4738,11 +4738,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Сохранить библиотеку инструментов + + + Tooltable JSON (*.json) + Таблица инструментов JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Таблица инструментов HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Таблица инструментов LinuxCNC (*.tbl) + Open tooltable Открыть таблицу инструментов + + + Save tooltable + Сохранить таблицу инструментов + + + + Rename Tooltable + Переименовать таблицу инструментов + + + + Enter Name: + Введите имя: + + + + Add New Tool Table + Добавить новую таблицу инструментов + + + + Delete Selected Tool Table + Удалить выбранную таблицу инструментов + + + + Rename Selected Tool Table + Переименовать выбранную таблицу инструментов + Tooltable editor @@ -4953,11 +4998,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Таблица инструментов XML (*.xml); Таблица инструментов HeeksCAD (*.tooltable) - - - Save tooltable - Сохранить таблицу инструментов - Tooltable XML (*.xml) @@ -4973,46 +5013,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Объект не содержит таблицу инструментов - - - Rename Tooltable - Переименовать таблицу инструментов - - - - Enter Name: - Введите имя: - - - - Add New Tool Table - Добавить новую таблицу инструментов - - - - Delete Selected Tool Table - Удалить выбранную таблицу инструментов - - - - Rename Selected Tool Table - Переименовать выбранную таблицу инструментов - - - - Tooltable JSON (*.json) - Таблица инструментов JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Таблица инструментов HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Таблица инструментов LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sk.ts b/src/Mod/Path/Gui/Resources/translations/Path_sk.ts index 1ac81a8f78..edb07ef66d 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sk.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sk.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - - Stop index(angle) for rotational scan - Index zastavenia(uhol) pre rotačné skenovanie - - - - Dropcutter lines are created parallel to this axis. - Dropcutter lines are created parallel to this axis. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Should the operation be limited by the stock object or by the bounding box of the base object - - - Additional offset to the selected bounding box - Dodatočný odstup k vybranému ohraničujúcemu rámčeku - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Enable optimization which removes unnecessary points from G-Code output + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - The model will be rotated around this axis. - Model sa bude otáčať okolo tejto osi. - - - - Start index(angle) for rotational scan - Počiatočný index(uhol) pre rotačné skenovanie + + Stop index(angle) for rotational scan + Index zastavenia(uhol) pre rotačné skenovanie @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Cut through waste to depth at model edge, releasing the model. + + + Dropcutter lines are created parallel to this axis. + Dropcutter lines are created parallel to this axis. + + + + Additional offset to the selected bounding box + Dodatočný odstup k vybranému ohraničujúcemu rámčeku + + + + The model will be rotated around this axis. + Model sa bude otáčať okolo tejto osi. + + + + Start index(angle) for rotational scan + Počiatočný index(uhol) pre rotačné skenovanie + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied The path to be copied - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + Knižnica použitá pri generovaní dráhy + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - Knižnica použitá pri generovaní dráhy + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utils - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - @@ -1980,6 +1980,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3461,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3480,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3984,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4233,6 +4233,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + The Job has no selected Base object. + Check the path job for common errors @@ -4313,11 +4318,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height - - - The Job has no selected Base object. - The Job has no selected Base object. - Maximum Z Height @@ -4649,6 +4649,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4690,6 +4690,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4739,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +4999,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sl.ts b/src/Mod/Path/Gui/Resources/translations/Path_sl.ts index c475cfe26c..06aa4960c9 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sl.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sl.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Ko je modul v razhroščevalnem načinu, prikaži začasni predmet za ustvarjanje poti. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Manjše vrednosti prinašajo drobnejše, natančnejše ploskovje, vendar zelo podaljšajo obdelovalni čas. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Manjše vrednosti prinašajo drobnejše, natančnejše ploskovje, hkrati pa ne podaljšajo obdelovalnega časa preveč. - - - - Stop index(angle) for rotational scan - Pokazatelj zaustavitve (kot) pri sukajočem pregledu - - - - Dropcutter lines are created parallel to this axis. - Črte spustnega rezkanja se naredijo vzporedno s to osjo. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Naj bo opravilo omejeno s predmetom iz zaloge ali z mejnim kvadrom osnovnega predmeta - - - Additional offset to the selected bounding box - Dodatni odmik izbranega mejnega kvadra - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Omogoči optimizacijo ki odstrani odvečne točke iz izhodne G-kode + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Manjše vrednosti prinašajo drobnejše, natančnejše ploskovje, vendar zelo podaljšajo obdelovalni čas. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Manjše vrednosti prinašajo drobnejše, natančnejše ploskovje, hkrati pa ne podaljšajo obdelovalnega časa preveč. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ Smer vzdolž katere bi morala pot orodja potekati okoli dela: Vzpenjajoča (v smeri urinega kazalca) ali Običajna (v nasprotni smeri urnega kazalca) - - The model will be rotated around this axis. - Predmet bo zavrten okoli te osi. - - - - Start index(angle) for rotational scan - Pokazatelj začetka (kót) pri sukajočem pregledu + + Stop index(angle) for rotational scan + Pokazatelj zaustavitve (kot) pri sukajočem pregledu @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Reži skozi odpad do globine na robu modela s sprostitvijo modela. + + + Dropcutter lines are created parallel to this axis. + Črte spustnega rezkanja se naredijo vzporedno s to osjo. + + + + Additional offset to the selected bounding box + Dodatni odmik izbranega mejnega kvadra + + + + The model will be rotated around this axis. + Predmet bo zavrten okoli te osi. + + + + Start index(angle) for rotational scan + Pokazatelj začetka (kót) pri sukajočem pregledu + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied Pot za kopiranje - - - The base geometry of this toolpath - Osnovna geometrija te poti orodja - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Pri opravilih naj se uporabi dodaten odmik. Smer je odvisna od opravila. + + + The library to use to generate the path + Knjižnica, ki se jo uporabi pri ustvarjanju poti + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Nastavi Prav, če se uporablja Popravek polmira rezkarja - - The library to use to generate the path - Knjižnica, ki se jo uporabi pri ustvarjanju poti + + The base geometry of this toolpath + Osnovna geometrija te poti orodja @@ -986,16 +986,16 @@ Selected tool is not a drill Izbrano orodje ni sveder - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Neveljaven kót rezilnega roba %.2f, biti mora >0° in <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Neveljaven kót rezilnega roba %.2f, biti mora <90° in >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Neveljaven kót rezilnega roba %.2f, biti mora >0° in <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Povišano na vrh obdelovanca. Ignoring non-horizontal Face Prezrta nevodoravna ploskev + + + Face appears misaligned after initial rotation. + Ploskev je videti po začetnem sukanju neporavnana. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Razmisli o preklapljanju značilnosti 'ObratniKot' in ponovnem izračunu. + + + + Multiple faces in Base Geometry. + Večkratne ploskve v Osnovni geometriji. + + + + Depth settings will be applied to all faces. + Nastavitev globine bo uporabljena na vseh ploskvah. + + + + EnableRotation property is 'Off'. + Lastnost OmogočiSukanje je "Izklopljena". + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Povišano na vrh obdelovanca. Utils Pripomočki - - - Face appears misaligned after initial rotation. - Ploskev je videti po začetnem sukanju neporavnana. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Razmisli o preklapljanju značilnosti 'ObratniKot' in ponovnem izračunu. - - - - Multiple faces in Base Geometry. - Večkratne ploskve v Osnovni geometriji. - - - - Depth settings will be applied to all faces. - Nastavitev globine bo uporabljena na vseh ploskvah. - - - - EnableRotation property is 'Off'. - Lastnost OmogočiSukanje je "Izklopljena". - @@ -1980,6 +1980,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Oblika ugreza + + + + Creates a Path Pocket object from a face or faces + Ustvari pot ugreza iz ploskve ali ploskev + Normal @@ -2030,16 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Končna globina je nastavljena pod ZNajm izbrane(ih) ploskve(ev). - - - Pocket Shape - Oblika ugreza - - - - Creates a Path Pocket object from a face or faces - Ustvari pot ugreza iz ploskve ali ploskev - 3D Pocket @@ -3461,16 +3461,6 @@ privzeto=10,0. Path_Dressup - - - Dress-up - Dodelava - - - - Creates a Path Dess-up object from a selected path - Ustvari iz izbrane poti predmet dodelave poti - Please select one path object @@ -3490,6 +3480,16 @@ privzeto=10,0. Please select a Path object Izberite pot + + + Dress-up + Dodelava + + + + Creates a Path Dess-up object from a selected path + Ustvari iz izbrane poti predmet dodelave poti + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ privzeto=10,0. Creates a Path Hop object Ustvari predmet skoka poti + + + The selected object is not a path + + Izbrani predmet ni pot + + Please select one path object @@ -3977,13 +3984,6 @@ privzeto=10,0. Create Hop Ustvari skok - - - The selected object is not a path - - Izbrani predmet ni pot - - Path_Inspect @@ -4233,6 +4233,11 @@ privzeto=10,0. Path_Sanity + + + The Job has no selected Base object. + Opravilo nima izbranega osnovnega predmeta. + Check the path job for common errors @@ -4313,11 +4318,6 @@ privzeto=10,0. Minimum Z Height Najmanjša višina Z - - - The Job has no selected Base object. - Opravilo nima izbranega osnovnega predmeta. - Maximum Z Height @@ -4649,6 +4649,11 @@ privzeto=10,0. Path_ToolController + + + Tool Number to Load + Številka orodja za nalaganje + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ privzeto=10,0. Add Tool Controller Dodaj orodni krmilnik - - - Tool Number to Load - Številka orodja za nalaganje - Path_ToolTable @@ -4690,6 +4690,11 @@ privzeto=10,0. Creates a medial line engraving path Ustvari vrezovalno pot po srednjici + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve potrebuje vrezovalnik s kotom rezilnega roba + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ privzeto=10,0. Engraver Cutting Edge Angle must be < 180 degrees. Rezilni kót vrezovalnika mora biti < 180 stopnij. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve potrebuje vrezovalnik s kotom rezilnega roba - Path_Waterline @@ -4739,11 +4739,56 @@ privzeto=10,0. Save toolbit library Shrani knjižnico orodnih nastavkov + + + Tooltable JSON (*.json) + Preglednica orodij JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD-ova preglednica orodij (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC-jeva preglednica orodij (*.tbl) + Open tooltable Odpri preglednico orodij + + + Save tooltable + Shrani preglednico orodij + + + + Rename Tooltable + Preimenuj orodno mizo + + + + Enter Name: + Vnesite ime: + + + + Add New Tool Table + Dodaj novo preglednico orodij + + + + Delete Selected Tool Table + Izbriši izbrano preglednico orodij + + + + Rename Selected Tool Table + Preimenuj izbrano preglednico orodij + Tooltable editor @@ -4954,11 +4999,6 @@ privzeto=10,0. Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Preglednica orodij XML (*.xml);;preglednica orodij HeeksCAD (*.tooltable) - - - Save tooltable - Shrani preglednico orodij - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ privzeto=10,0. Object doesn't have a tooltable property Predmet nima lastnosti preglednice orodij - - - Rename Tooltable - Preimenuj orodno mizo - - - - Enter Name: - Vnesite ime: - - - - Add New Tool Table - Dodaj novo preglednico orodij - - - - Delete Selected Tool Table - Izbriši izbrano preglednico orodij - - - - Rename Selected Tool Table - Preimenuj izbrano preglednico orodij - - - - Tooltable JSON (*.json) - Preglednica orodij JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD-ova preglednica orodij (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC-jeva preglednica orodij (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sr.ts b/src/Mod/Path/Gui/Resources/translations/Path_sr.ts index 38356f1f4b..a0fc40812f 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sr.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - - Stop index(angle) for rotational scan - Stop index(angle) for rotational scan - - - - Dropcutter lines are created parallel to this axis. - Dropcutter lines are created parallel to this axis. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Should the operation be limited by the stock object or by the bounding box of the base object - - - Additional offset to the selected bounding box - Additional offset to the selected bounding box - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Enable optimization which removes unnecessary points from G-Code output + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - The model will be rotated around this axis. - The model will be rotated around this axis. - - - - Start index(angle) for rotational scan - Start index(angle) for rotational scan + + Stop index(angle) for rotational scan + Stop index(angle) for rotational scan @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Cut through waste to depth at model edge, releasing the model. + + + Dropcutter lines are created parallel to this axis. + Dropcutter lines are created parallel to this axis. + + + + Additional offset to the selected bounding box + Additional offset to the selected bounding box + + + + The model will be rotated around this axis. + The model will be rotated around this axis. + + + + Start index(angle) for rotational scan + Start index(angle) for rotational scan + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied Путања за умножавање - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + The library to use to generate the path + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - The library to use to generate the path + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utils - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - @@ -1980,6 +1980,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3461,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3480,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3984,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4233,6 +4233,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + The Job has no selected Base object. + Check the path job for common errors @@ -4313,11 +4318,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height - - - The Job has no selected Base object. - The Job has no selected Base object. - Maximum Z Height @@ -4649,6 +4649,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4690,6 +4690,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4739,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +4999,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts index ab6d282088..a7af18cd86 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_sv-SE.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Visa de tillfälliga bankonstruktionsobjekten när modulen är i DEBUG-läge. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Mindre värden ger ett finare, mer exakt nät. Mindre värden ökar bearbetningstiden mycket. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Mindre värden ger ett finare, mer exakt nät. Mindre värden ökar inte bearbetningstiden mycket. - - - - Stop index(angle) for rotational scan - Stoppa index(vinkel) för rotationsgenomsökning - - - - Dropcutter lines are created parallel to this axis. - Dropcutter-linjer skapas parallellt med den här axeln. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Ska operationen begränsas av stamobjektet eller av grundobjektets begränsningsruta - - - Additional offset to the selected bounding box - Ytterligare förskjutning till den markerade begränsningsramen - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Aktivera optimering som tar bort onödiga punkter från G-Code-utdata + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Mindre värden ger ett finare, mer exakt nät. Mindre värden ökar bearbetningstiden mycket. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Mindre värden ger ett finare, mer exakt nät. Mindre värden ökar inte bearbetningstiden mycket. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ Den riktning som verktygsbanan ska gå runt delen: Klättra(Medurs) eller Konventionell(Moturs) - - The model will be rotated around this axis. - Modellen kommer att roteras runt denna axel. - - - - Start index(angle) for rotational scan - Startindex(vinkel) för rotationsgenomsökning + + Stop index(angle) for rotational scan + Stoppa index(vinkel) för rotationsgenomsökning @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Skär genom avfall till djup vid modellkanten, släppa modellen. + + + Dropcutter lines are created parallel to this axis. + Dropcutter-linjer skapas parallellt med den här axeln. + + + + Additional offset to the selected bounding box + Ytterligare förskjutning till den markerade begränsningsramen + + + + The model will be rotated around this axis. + Modellen kommer att roteras runt denna axel. + + + + Start index(angle) for rotational scan + Startindex(vinkel) för rotationsgenomsökning + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied The path to be copied - - - The base geometry of this toolpath - Basgeometri för den här verktygsbanan - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra förskjutning att gälla för operationen. Riktning är driftberoende. + + + The library to use to generate the path + Biblioteket som används för att generera banan + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Gör True, om du använder Cutter Radius Compensation - - The library to use to generate the path - Biblioteket som används för att generera banan + + The base geometry of this toolpath + Basgeometri för den här verktygsbanan @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Ogiltig Skäreggsvinkel %.2f, måste vara >0° och <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Ogiltig Skäreggsvinkel %.2f, måste vara <90° och >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Ogiltig Skäreggsvinkel %.2f, måste vara >0° och <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignorerar icke-horisontell yta + + + Face appears misaligned after initial rotation. + Ansikte visas feljusterade efter inledande rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Tänk att växla "InverseAngle" egendom och omjäntar. + + + + Multiple faces in Base Geometry. + Flera ansikten i Basgeometri. + + + + Depth settings will be applied to all faces. + Djupinställningar kommer att tillämpas på alla ansikten. + + + + EnableRotation property is 'Off'. + EnableRotation-egenskapen är 'Av'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utils - - - Face appears misaligned after initial rotation. - Ansikte visas feljusterade efter inledande rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Tänk att växla "InverseAngle" egendom och omjäntar. - - - - Multiple faces in Base Geometry. - Flera ansikten i Basgeometri. - - - - Depth settings will be applied to all faces. - Djupinställningar kommer att tillämpas på alla ansikten. - - - - EnableRotation property is 'Off'. - EnableRotation-egenskapen är 'Av'. - @@ -1980,6 +1980,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Fickform + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Fickform - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3461,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3480,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3984,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4233,6 +4233,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + The Job has no selected Base object. + Check the path job for common errors @@ -4313,11 +4318,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minsta Z-höjd - - - The Job has no selected Base object. - The Job has no selected Base object. - Maximum Z Height @@ -4649,6 +4649,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4690,6 +4690,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4739,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Ange namn: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +4999,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Ange namn: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_tr.ts b/src/Mod/Path/Gui/Resources/translations/Path_tr.ts index 37b84ae327..c1a77a206a 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_tr.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_tr.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Modül HATA AYIKLAMA kipinde olduğunda geçici 'takım yolu inşa nesnelerini' göster. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Daha küçük değerler, daha iyi ve daha hassas ağ örgüsü sağlar ama işleme süresini çok artırır. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Daha küçük değerler, daha iyi ve daha hassas ağ örgüsü sağlar. Bu değerler işleme süresini çok fazla artırmaz. - - - - Stop index(angle) for rotational scan - Dönel tarama için bitiş açısı - - - - Dropcutter lines are created parallel to this axis. - Dropcutter çizgileri bu eksene paralel olarak oluşturulur. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object İşlem, stok nesnesi ya da temel nesnenin sınır kutusu tarafından sınırlanmalıdır - - - Additional offset to the selected bounding box - Seçili Sınır Kutusunu ilave ötele - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output G-Kod çıktısında gereksiz noktaları kaldıran optimizasyonu etkinleştir + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Daha küçük değerler, daha iyi ve daha hassas ağ örgüsü sağlar ama işleme süresini çok artırır. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Daha küçük değerler, daha iyi ve daha hassas ağ örgüsü sağlar. Bu değerler işleme süresini çok fazla artırmaz. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ Takım yolunun parça etrafında dönme yönü: Tırmanış(Saat Yönü) veya Geleneksel(Saat Yönünün Tersi) - - The model will be rotated around this axis. - Model, eksen etrafında döndürmüş olacak. - - - - Start index(angle) for rotational scan - Dönel tarama için başlangıç açısı + + Stop index(angle) for rotational scan + Dönel tarama için bitiş açısı @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Atığı model sınırındaki derinliğe kadar kes, modeli yayınla. + + + Dropcutter lines are created parallel to this axis. + Dropcutter çizgileri bu eksene paralel olarak oluşturulur. + + + + Additional offset to the selected bounding box + Seçili Sınır Kutusunu ilave ötele + + + + The model will be rotated around this axis. + Model, eksen etrafında döndürmüş olacak. + + + + Start index(angle) for rotational scan + Dönel tarama için başlangıç açısı + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied Kopyalanacak yol - - - The base geometry of this toolpath - Bu takım yolunun temel geometrisi - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. İşlem için uygulanacak ekstra ofset. Yön operasyona bağlıdır. + + + The library to use to generate the path + Yolu oluşturmak için kullanılacak kitaplık + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Kesici Yarıçap dengelemesi kullanıyorsanız, Gerçekleştirin - - The library to use to generate the path - Yolu oluşturmak için kullanılacak kitaplık + + The base geometry of this toolpath + Bu takım yolunun temel geometrisi @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Geçersiz kenar kesme açısı %.2f, >0 ve <=180 derece arasında olmalı. - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Geçersiz Kesme kenar açı %.2f,-meli var olmak < 90° ve > = 0 ° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Geçersiz kenar kesme açısı %.2f, >0 ve <=180 derece arasında olmalı. + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Mevcut üst noktaya arttırıldı. Ignoring non-horizontal Face Yatay olmayan Yüzeyi yok say + + + Face appears misaligned after initial rotation. + İlk dönüşten sonra yüzeyler hizalanmadı. + + + + Consider toggling the 'InverseAngle' property and recomputing. + TersAçı özelliğine geçip operasyonu tekrar hesaplamayı dikkate al. + + + + Multiple faces in Base Geometry. + Ana geometrideki çoklu yüzler. + + + + Depth settings will be applied to all faces. + Derinlik ayarları tüm yüzeylere uygulanmış olacak. + + + + EnableRotation property is 'Off'. + DönüşüEtkinleştir özelliği 'Kapalı'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Mevcut üst noktaya arttırıldı. Utils Yardımcılar - - - Face appears misaligned after initial rotation. - İlk dönüşten sonra yüzeyler hizalanmadı. - - - - Consider toggling the 'InverseAngle' property and recomputing. - TersAçı özelliğine geçip operasyonu tekrar hesaplamayı dikkate al. - - - - Multiple faces in Base Geometry. - Ana geometrideki çoklu yüzler. - - - - Depth settings will be applied to all faces. - Derinlik ayarları tüm yüzeylere uygulanmış olacak. - - - - EnableRotation property is 'Off'. - DönüşüEtkinleştir özelliği 'Kapalı'. - @@ -1980,6 +1980,16 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se PathPocket + + + Pocket Shape + Cep şekli + + + + Creates a Path Pocket object from a face or faces + Yüz veya yüzlerden Path Pocket nesnesi oluşturur + Normal @@ -2030,16 +2040,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Final depth set below ZMin of face(s) selected. Son derinliği, seçili yüz(ler) in Zmin değeri altına ayarla. - - - Pocket Shape - Cep şekli - - - - Creates a Path Pocket object from a face or faces - Yüz veya yüzlerden Path Pocket nesnesi oluşturur - 3D Pocket @@ -3460,16 +3460,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Path_Dressup - - - Dress-up - Giydirme - - - - Creates a Path Dess-up object from a selected path - Seçilen bir yoldan bir Yol Giydirme nesnesi oluşturur - Please select one path object @@ -3489,6 +3479,16 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Please select a Path object Lütfen bir Yol nesnesi seçin + + + Dress-up + Giydirme + + + + Creates a Path Dess-up object from a selected path + Seçilen bir yoldan bir Yol Giydirme nesnesi oluşturur + Path_DressupAxisMap @@ -3961,6 +3961,13 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Creates a Path Hop object Bir nokta nesnesi oluşturur + + + The selected object is not a path + + Seçilen nesne bir yol değil + + Please select one path object @@ -3976,13 +3983,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Create Hop Kopya oluştur - - - The selected object is not a path - - Seçilen nesne bir yol değil - - Path_Inspect @@ -4232,6 +4232,11 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Path_Sanity + + + The Job has no selected Base object. + İşin Seçili temel nesnesi yok. + Check the path job for common errors @@ -4312,11 +4317,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Minimum Z Height En az Z Yüksekliği - - - The Job has no selected Base object. - İşin Seçili temel nesnesi yok. - Maximum Z Height @@ -4648,6 +4648,11 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Path_ToolController + + + Tool Number to Load + Yüklenecek Takım Numarası + Add Tool Controller to the Job @@ -4658,11 +4663,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Add Tool Controller Araç Kumandasını Ekle - - - Tool Number to Load - Yüklenecek Takım Numarası - Path_ToolTable @@ -4689,6 +4689,11 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Creates a medial line engraving path Bir orta çizgi gravür yolu oluşturur + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve, KesmeKenarıAçısına sahip bir gravür kesici gerektirir + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4699,11 +4704,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Engraver Cutting Edge Angle must be < 180 degrees. Gravür kesici kenar açısı < 180 derece olmalıdır. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve, KesmeKenarıAçısına sahip bir gravür kesici gerektirir - Path_Waterline @@ -4738,11 +4738,56 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Save toolbit library Torna kalemi kitaplığını kaydet + + + Tooltable JSON (*.json) + Araç Tablosu JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD araç tablosu (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC araç tablosu (*.tbl) + Open tooltable Araç masasını açın + + + Save tooltable + Araç masasını kaydet + + + + Rename Tooltable + Torna kalemi yeniden adlandır + + + + Enter Name: + Ad Girin: + + + + Add New Tool Table + Yeni Alet Tablosu Ekle + + + + Delete Selected Tool Table + Seçili Alet Tablosunu Sil + + + + Rename Selected Tool Table + Seçili Araç Tablosunu Yeniden Adlandır + Tooltable editor @@ -4953,11 +4998,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Araç Tabanlı XML (*.xml);; HeeksCAD araç tablosu (*.tooltable) - - - Save tooltable - Araç masasını kaydet - Tooltable XML (*.xml) @@ -4973,46 +5013,6 @@ FinalDepth'i manuel olarak ayarlamak gerekiyorsa, lütfen farklı bir işlem se Object doesn't have a tooltable property Nesnenin araç özellikli bir özelliği yok - - - Rename Tooltable - Torna kalemi yeniden adlandır - - - - Enter Name: - Ad Girin: - - - - Add New Tool Table - Yeni Alet Tablosu Ekle - - - - Delete Selected Tool Table - Seçili Alet Tablosunu Sil - - - - Rename Selected Tool Table - Seçili Araç Tablosunu Yeniden Adlandır - - - - Tooltable JSON (*.json) - Araç Tablosu JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD araç tablosu (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC araç tablosu (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_uk.ts b/src/Mod/Path/Gui/Resources/translations/Path_uk.ts index 801e509a73..8f1334992e 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_uk.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_uk.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Показати тимчасовий шлях побудови об’єктів, коли модуль перебуває в режимі DEBUG. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Менші значення дають більш тонку та точну сітку. Менші значення значно збільшують час обробки. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Менші значення дають більш тонку та точну сітку. Менші значення не збільшують час обробки. - - - - Stop index(angle) for rotational scan - Індекс зупинки (кут) для обертального сканування - - - - Dropcutter lines are created parallel to this axis. - Паралельно цій осі створюються лінії різака. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Якщо операція повинна бути обмежена наявним об'єктом або обмежувальною рамкою базового об'єкта - - - Additional offset to the selected bounding box - Додаткове зміщення до обраної обмежувальної рамки - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Увімкнути оптимізацію, що видаляє непотрібні точки з виведення G-Code + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Менші значення дають більш тонку та точну сітку. Менші значення значно збільшують час обробки. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Менші значення дають більш тонку та точну сітку. Менші значення не збільшують час обробки. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ Напрямок, яким повинен проходити шлях інструменту по деталі: Підйом (ClockWise) або Звичайний (CounterClockWise) - - The model will be rotated around this axis. - Модель буде обертатися навколо цієї осі. - - - - Start index(angle) for rotational scan - Індекс старту (кут) для обертального сканування + + Stop index(angle) for rotational scan + Індекс зупинки (кут) для обертального сканування @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Розрізати відходи на глибину до краю моделі, щоб звільнити модель. + + + Dropcutter lines are created parallel to this axis. + Паралельно цій осі створюються лінії різака. + + + + Additional offset to the selected bounding box + Додаткове зміщення до обраної обмежувальної рамки + + + + The model will be rotated around this axis. + Модель буде обертатися навколо цієї осі. + + + + Start index(angle) for rotational scan + Індекс старту (кут) для обертального сканування + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied Траєкторія для копіювання - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + Бібліотека, що використовується для створення траєкторії + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - Бібліотека, що використовується для створення траєкторії + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utils - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - @@ -1980,6 +1980,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3461,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3480,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3984,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4233,6 +4233,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + The Job has no selected Base object. + Check the path job for common errors @@ -4313,11 +4318,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height - - - The Job has no selected Base object. - The Job has no selected Base object. - Maximum Z Height @@ -4649,6 +4649,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4690,6 +4690,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4739,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +4999,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts index 5cab8e6c1b..a272032604 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_val-ES.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Mostra els objectes de construcció del camí temporal quan el mòdul estiga en mode DEPURACIÓ. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Els valors més xicotets produeixen una malla més fina i precisa. Els valors més xicotets augmenten molt el temps de processament. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Els valors més xicotets produeixen una malla més fina i precisa. Els valors més xicotets no augmenten massa el temps de processament. - - - - Stop index(angle) for rotational scan - Para l'índex(angle) per a l'escàner rotacional - - - - Dropcutter lines are created parallel to this axis. - Les línies dropcutter es creen paral·leles a aquest eix. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object En cas que l'operació estiga limitada per l'objecte estoc o pel la caixa contenidora de l'objecte base - - - Additional offset to the selected bounding box - Separació addicional a la caixa contenidora seleccionada - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Activa l'optimització que suprimisca els punts innecessaris del resultat G-Code + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Els valors més xicotets produeixen una malla més fina i precisa. Els valors més xicotets augmenten molt el temps de processament. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Els valors més xicotets produeixen una malla més fina i precisa. Els valors més xicotets no augmenten massa el temps de processament. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ La direcció que la trajectòria ha de seguir al voltant de la peça: Pujada (sentit horari) o Convencional(sentit antihorari) - - The model will be rotated around this axis. - El model girarà al voltant d'aquest eix. - - - - Start index(angle) for rotational scan - Inicia l'índex(angle) per a l'escàner rotacional + + Stop index(angle) for rotational scan + Para l'índex(angle) per a l'escàner rotacional @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Retalla els residus fins al fons en la vora del model, alliberant-lo. + + + Dropcutter lines are created parallel to this axis. + Les línies dropcutter es creen paral·leles a aquest eix. + + + + Additional offset to the selected bounding box + Separació addicional a la caixa contenidora seleccionada + + + + The model will be rotated around this axis. + El model girarà al voltant d'aquest eix. + + + + Start index(angle) for rotational scan + Inicia l'índex(angle) per a l'escàner rotacional + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied El camí que es copia - - - The base geometry of this toolpath - La geometria base d'aquesta trajectòria - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Desplaçament addicional que s'aplica a l'operació. La direcció és dependent de l'operació. + + + The library to use to generate the path + La biblioteca que s'utilitza per a generar el camí + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Marqueu «cert», si s'utilitza compensació de radi de l'eina de tall - - The library to use to generate the path - La biblioteca que s'utilitza per a generar el camí + + The base geometry of this toolpath + La geometria base d'aquesta trajectòria @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - L'angle de tall %.2f no és vàlid, ha de ser >0° i <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° L'angle de tall %.2f no és vàlid, ha de ser <90° i >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + L'angle de tall %.2f no és vàlid, ha de ser >0° i <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + La cara es mostra desalineada després de la rotació inicial. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Penseu a alternar la propietat InverteixAngle i tornar a calcular l'operació. + + + + Multiple faces in Base Geometry. + Múltiples cares en la geometria de base. + + + + Depth settings will be applied to all faces. + La configuració de profunditat s'aplicarà a totes les cares. + + + + EnableRotation property is 'Off'. + La propietat ActivaRotació està «desactivada». + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utils - - - Face appears misaligned after initial rotation. - La cara es mostra desalineada després de la rotació inicial. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Penseu a alternar la propietat InverteixAngle i tornar a calcular l'operació. - - - - Multiple faces in Base Geometry. - Múltiples cares en la geometria de base. - - - - Depth settings will be applied to all faces. - La configuració de profunditat s'aplicarà a totes les cares. - - - - EnableRotation property is 'Off'. - La propietat ActivaRotació està «desactivada». - @@ -1978,6 +1978,16 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una PathPocket + + + Pocket Shape + Forma del buidatge + + + + Creates a Path Pocket object from a face or faces + Crea un objecte de Trajectòria de buidatge des d'una o vàries cares + Normal @@ -2028,16 +2038,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Final depth set below ZMin of face(s) selected. Profunditat final establerta per davall de ZMin de la cara o cares seleccionades. - - - Pocket Shape - Forma del buidatge - - - - Creates a Path Pocket object from a face or faces - Crea un objecte de Trajectòria de buidatge des d'una o vàries cares - 3D Pocket @@ -3449,16 +3449,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_Dressup - - - Dress-up - Aspecte - - - - Creates a Path Dess-up object from a selected path - Crea un objecte aspecte del camí a partir d'un camí seleccionat - Please select one path object @@ -3476,6 +3466,16 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Please select a Path object Seleccioneu un objecte camí + + + Dress-up + Aspecte + + + + Creates a Path Dess-up object from a selected path + Crea un objecte aspecte del camí a partir d'un camí seleccionat + Path_DressupAxisMap @@ -3948,6 +3948,12 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Creates a Path Hop object Crea un objecte de tipus salt en el camí + + + The selected object is not a path + + L'objecte seleccionat no és un camí + Please select one path object @@ -3963,12 +3969,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Create Hop Crea un salt - - - The selected object is not a path - - L'objecte seleccionat no és un camí - Path_Inspect @@ -4215,6 +4215,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_Sanity + + + The Job has no selected Base object. + La tasca no té un objecte base seleccionat. + Check the path job for common errors @@ -4295,11 +4300,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Minimum Z Height Minimum Z Height - - - The Job has no selected Base object. - La tasca no té un objecte base seleccionat. - Maximum Z Height @@ -4625,6 +4625,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Path_ToolController + + + Tool Number to Load + Número d'eina per carregar + Add Tool Controller to the Job @@ -4635,11 +4640,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Add Tool Controller Afig un controlador d'eina - - - Tool Number to Load - Número d'eina per carregar - Path_ToolTable @@ -4666,6 +4666,11 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4676,11 +4681,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4715,11 +4715,56 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Save toolbit library Desa la llibreria d'eines de bits + + + Tooltable JSON (*.json) + Taula d'eines JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Taula d'eines HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Taula d'eines LinuxCNC (*.tbl) + Open tooltable Obri la taula d'eines + + + Save tooltable + Guarda la taula d'eines + + + + Rename Tooltable + Canvia el nom de la taula d'eines + + + + Enter Name: + Introduïu el nom: + + + + Add New Tool Table + Afig una taula d'eines nova + + + + Delete Selected Tool Table + Elimina la taula d'eines seleccionada + + + + Rename Selected Tool Table + Canvia el nom de la taula d'eines seleccionada + Tooltable editor @@ -4930,11 +4975,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Taula d'eines XML (*.xml);;Taula d'eines HeeksCAD (*.tooltable) - - - Save tooltable - Guarda la taula d'eines - Tooltable XML (*.xml) @@ -4950,46 +4990,6 @@ Si és necessari establir la profunditat final de forma manual, seleccioneu una Object doesn't have a tooltable property L'objecte no té la propietat de taula d'eines - - - Rename Tooltable - Canvia el nom de la taula d'eines - - - - Enter Name: - Introduïu el nom: - - - - Add New Tool Table - Afig una taula d'eines nova - - - - Delete Selected Tool Table - Elimina la taula d'eines seleccionada - - - - Rename Selected Tool Table - Canvia el nom de la taula d'eines seleccionada - - - - Tooltable JSON (*.json) - Taula d'eines JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Taula d'eines HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Taula d'eines LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_vi.ts b/src/Mod/Path/Gui/Resources/translations/Path_vi.ts index ed7b70f3b4..195edc6fe4 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_vi.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_vi.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Hiển thị đối tượng cấu trúc đường dẫn tạm thời khi mô-đun ở chế độ GỠ LỖI. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - - Stop index(angle) for rotational scan - Stop index(angle) for rotational scan - - - - Dropcutter lines are created parallel to this axis. - Dropcutter lines are created parallel to this axis. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Should the operation be limited by the stock object or by the bounding box of the base object - - - Additional offset to the selected bounding box - Additional offset to the selected bounding box - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Enable optimization which removes unnecessary points from G-Code output + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - The model will be rotated around this axis. - The model will be rotated around this axis. - - - - Start index(angle) for rotational scan - Start index(angle) for rotational scan + + Stop index(angle) for rotational scan + Stop index(angle) for rotational scan @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Cut through waste to depth at model edge, releasing the model. + + + Dropcutter lines are created parallel to this axis. + Dropcutter lines are created parallel to this axis. + + + + Additional offset to the selected bounding box + Additional offset to the selected bounding box + + + + The model will be rotated around this axis. + The model will be rotated around this axis. + + + + Start index(angle) for rotational scan + Start index(angle) for rotational scan + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied Đường dẫn cần được sao chép - - - The base geometry of this toolpath - Hình dạng cơ sở của đường chạy dao này - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Offset thêm để áp dụng cho các thao tác. Hướng thao tác là phụ thuộc. + + + The library to use to generate the path + Thư viện sử dụng để tạo đường dẫn + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - Thư viện sử dụng để tạo đường dẫn + + The base geometry of this toolpath + Hình dạng cơ sở của đường chạy dao này @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Góc cắt cạnh không hợp lệ %.2f, phải là <90° và >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utils - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - @@ -1980,6 +1980,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Hình túi + + + + Creates a Path Pocket object from a face or faces + Tạo một đối tượng Đường dẫn túi từ một hoặc nhiều mặt + Normal @@ -2030,16 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Hình túi - - - - Creates a Path Pocket object from a face or faces - Tạo một đối tượng Đường dẫn túi từ một hoặc nhiều mặt - 3D Pocket @@ -3461,16 +3461,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Chức năng xây dựng kết cấu bên ngoài - - - - Creates a Path Dess-up object from a selected path - Tạo một đối tượng xây dựng áo đường từ một đường dẫn đã chọn - Please select one path object @@ -3490,6 +3480,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Vui lòng chọn đối tượng Đường dẫn + + + Dress-up + Chức năng xây dựng kết cấu bên ngoài + + + + Creates a Path Dess-up object from a selected path + Tạo một đối tượng xây dựng áo đường từ một đường dẫn đã chọn + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Tạo một đối tượng đường dẫn bước nhảy + + + The selected object is not a path + + Đối tượng được chọn không phải là một đường dẫn + + Please select one path object @@ -3977,13 +3984,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Tạo bước nhảy - - - The selected object is not a path - - Đối tượng được chọn không phải là một đường dẫn - - Path_Inspect @@ -4233,6 +4233,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + Công việc không có đối tượng cơ sở đã chọn. + Check the path job for common errors @@ -4313,11 +4318,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height - - - The Job has no selected Base object. - Công việc không có đối tượng cơ sở đã chọn. - Maximum Z Height @@ -4649,6 +4649,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Số công cụ cần tải + Add Tool Controller to the Job @@ -4659,11 +4664,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Thêm bộ điều khiển công cụ - - - Tool Number to Load - Số công cụ cần tải - Path_ToolTable @@ -4690,6 +4690,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4700,11 +4705,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4739,11 +4739,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Công cụ JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + Bảng công cụ HeeksCAD (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + Bảng công cụ LinuxCNC (*.tbl) + Open tooltable Mở hộp công cụ + + + Save tooltable + Lưu hộp công cụ + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4954,11 +4999,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Hộp công cụ XML (*.xml);;Hộp công cụ HeeksCAD (*.tooltable) - - - Save tooltable - Lưu hộp công cụ - Tooltable XML (*.xml) @@ -4974,46 +5014,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Đối tượng không có thuộc tính của hộp công cụ - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Công cụ JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - Bảng công cụ HeeksCAD (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - Bảng công cụ LinuxCNC (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts index f3d62b4792..295afa7751 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_zh-CN.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. Show the temporary path construction objects when module is in DEBUG mode. - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - - Stop index(angle) for rotational scan - 旋转扫描的停止分度(角度) - - - - Dropcutter lines are created parallel to this axis. - Dropcutter lines are created parallel to this axis. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object 操作被工件对象或者基础对象的边界框限制 - - - Additional offset to the selected bounding box - 基于选定边界框的额外偏移 - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output 启用优化，从G-Code输出中移除不必要的点 + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - The model will be rotated around this axis. - 模型将绕此轴旋转。 - - - - Start index(angle) for rotational scan - 旋转扫描的起始分度(角度) + + Stop index(angle) for rotational scan + 旋转扫描的停止分度(角度) @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Cut through waste to depth at model edge, releasing the model. + + + Dropcutter lines are created parallel to this axis. + Dropcutter lines are created parallel to this axis. + + + + Additional offset to the selected bounding box + 基于选定边界框的额外偏移 + + + + The model will be rotated around this axis. + 模型将绕此轴旋转。 + + + + Start index(angle) for rotational scan + 旋转扫描的起始分度(角度) + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied 要复制的路径 - - - The base geometry of this toolpath - 此工具路径的基础几何形状 - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. 要应用于操作的额外偏移量。方向与操作相关。 + + + The library to use to generate the path + 用于生成路径的库 + Start pocketing at center or boundary @@ -704,9 +704,9 @@ 如果使用刀具半径补偿, 则为 True - - The library to use to generate the path - 用于生成路径的库 + + The base geometry of this toolpath + 此工具路径的基础几何形状 @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - 无效的切口边缘角度 %.2f, 必须 > 0°且 <= 180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° 无效的切削角, 此角度必须小于90°且大于或等于 0 ° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + 无效的切口边缘角度 %.2f, 必须 > 0°且 <= 180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utils - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - @@ -1979,6 +1979,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + 口袋形状 + + + + Creates a Path Pocket object from a face or faces + 从一个或多个面创建一个路径口袋对象 + Normal @@ -2029,16 +2039,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - 口袋形状 - - - - Creates a Path Pocket object from a face or faces - 从一个或多个面创建一个路径口袋对象 - 3D Pocket @@ -3460,16 +3460,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - 修饰 - - - - Creates a Path Dess-up object from a selected path - 从所选路径创建路径修整对象 - Please select one path object @@ -3489,6 +3479,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object 请选择路径对象 + + + Dress-up + 修饰 + + + + Creates a Path Dess-up object from a selected path + 从所选路径创建路径修整对象 + Path_DressupAxisMap @@ -3961,6 +3961,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object 创建一个路径跃点对象 + + + The selected object is not a path + + 所选对象不是路径 + + Please select one path object @@ -3976,13 +3983,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop 创建跃点 - - - The selected object is not a path - - 所选对象不是路径 - - Path_Inspect @@ -4232,6 +4232,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + 作业没有选定的基对象。 + Check the path job for common errors @@ -4312,11 +4317,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height - - - The Job has no selected Base object. - 作业没有选定的基对象。 - Maximum Z Height @@ -4648,6 +4648,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + 要加载的工具编号 + Add Tool Controller to the Job @@ -4658,11 +4663,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller 添加工具控制器 - - - Tool Number to Load - 要加载的工具编号 - Path_ToolTable @@ -4689,6 +4689,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4699,11 +4704,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4738,11 +4738,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable json (*. json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (* tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (* tbl) + Open tooltable 打开 tooltable + + + Save tooltable + 保存 tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4953,11 +4998,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable xml (*. xml);;HeeksCAD tooltable (* tooltable) - - - Save tooltable - 保存 tooltable - Tooltable XML (*.xml) @@ -4973,46 +5013,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property 对象没有 tooltable 属性 - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable json (*. json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (* tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (* tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts index 3611f0d084..4c8138ba91 100644 --- a/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts +++ b/src/Mod/Path/Gui/Resources/translations/Path_zh-TW.ts @@ -8,26 +8,6 @@ Show the temporary path construction objects when module is in DEBUG mode. 當模組處於除錯模式下創建物件時顯示暫時軌跡 - - - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. - - - - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. - - - - Stop index(angle) for rotational scan - Stop index(angle) for rotational scan - - - - Dropcutter lines are created parallel to this axis. - Dropcutter lines are created parallel to this axis. - The direction along which dropcutter lines are created @@ -38,11 +18,6 @@ Should the operation be limited by the stock object or by the bounding box of the base object Should the operation be limited by the stock object or by the bounding box of the base object - - - Additional offset to the selected bounding box - Additional offset to the selected bounding box - Step over percentage of the drop cutter path @@ -63,6 +38,16 @@ Enable optimization which removes unnecessary points from G-Code output Enable optimization which removes unnecessary points from G-Code output + + + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + Smaller values yield a finer, more accurate mesh. Smaller values increase processing time a lot. + + + + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + Smaller values yield a finer, more accurate mesh. Smaller values do not increase processing time much. + The completion mode for the operation: single or multi-pass @@ -74,14 +59,9 @@ The direction that the toolpath should go around the part: Climb(ClockWise) or Conventional(CounterClockWise) - - The model will be rotated around this axis. - The model will be rotated around this axis. - - - - Start index(angle) for rotational scan - Start index(angle) for rotational scan + + Stop index(angle) for rotational scan + Stop index(angle) for rotational scan @@ -98,6 +78,26 @@ Cut through waste to depth at model edge, releasing the model. Cut through waste to depth at model edge, releasing the model. + + + Dropcutter lines are created parallel to this axis. + Dropcutter lines are created parallel to this axis. + + + + Additional offset to the selected bounding box + Additional offset to the selected bounding box + + + + The model will be rotated around this axis. + The model will be rotated around this axis. + + + + Start index(angle) for rotational scan + Start index(angle) for rotational scan + Planar: Flat, 3D surface scan. Rotational: 4th-axis rotational scan. @@ -243,11 +243,6 @@ The path to be copied 要複製之路徑 - - - The base geometry of this toolpath - The base geometry of this toolpath - The tool controller that will be used to calculate the path @@ -563,6 +558,11 @@ Extra offset to apply to the operation. Direction is operation dependent. Extra offset to apply to the operation. Direction is operation dependent. + + + The library to use to generate the path + 用於生成函軌跡的函式庫 + Start pocketing at center or boundary @@ -704,9 +704,9 @@ Make True, if using Cutter Radius Compensation - - The library to use to generate the path - 用於生成函軌跡的函式庫 + + The base geometry of this toolpath + The base geometry of this toolpath @@ -986,16 +986,16 @@ Selected tool is not a drill Selected tool is not a drill - - - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be >0° and <=180° - Invalid Cutting Edge Angle %.2f, must be <90° and >=0° Invalid Cutting Edge Angle %.2f, must be <90° and >=0° + + + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Invalid Cutting Edge Angle %.2f, must be >0° and <=180° + Cutting Edge Angle (%.2f) results in negative tool tip length @@ -1158,6 +1158,31 @@ Increased to stock top. Ignoring non-horizontal Face Ignoring non-horizontal Face + + + Face appears misaligned after initial rotation. + Face appears misaligned after initial rotation. + + + + Consider toggling the 'InverseAngle' property and recomputing. + Consider toggling the 'InverseAngle' property and recomputing. + + + + Multiple faces in Base Geometry. + Multiple faces in Base Geometry. + + + + Depth settings will be applied to all faces. + Depth settings will be applied to all faces. + + + + EnableRotation property is 'Off'. + EnableRotation property is 'Off'. + Unable to create path for face(s). @@ -1223,31 +1248,6 @@ Increased to stock top. Utils Utils - - - Face appears misaligned after initial rotation. - Face appears misaligned after initial rotation. - - - - Consider toggling the 'InverseAngle' property and recomputing. - Consider toggling the 'InverseAngle' property and recomputing. - - - - Multiple faces in Base Geometry. - Multiple faces in Base Geometry. - - - - Depth settings will be applied to all faces. - Depth settings will be applied to all faces. - - - - EnableRotation property is 'Off'. - EnableRotation property is 'Off'. - @@ -1980,6 +1980,16 @@ If it is necessary to set the FinalDepth manually please select a different oper PathPocket + + + Pocket Shape + Pocket Shape + + + + Creates a Path Pocket object from a face or faces + Creates a Path Pocket object from a face or faces + Normal @@ -2030,16 +2040,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Final depth set below ZMin of face(s) selected. Final depth set below ZMin of face(s) selected. - - - Pocket Shape - Pocket Shape - - - - Creates a Path Pocket object from a face or faces - Creates a Path Pocket object from a face or faces - 3D Pocket @@ -3461,16 +3461,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Dressup - - - Dress-up - Dress-up - - - - Creates a Path Dess-up object from a selected path - Creates a Path Dess-up object from a selected path - Please select one path object @@ -3490,6 +3480,16 @@ If it is necessary to set the FinalDepth manually please select a different oper Please select a Path object Please select a Path object + + + Dress-up + Dress-up + + + + Creates a Path Dess-up object from a selected path + Creates a Path Dess-up object from a selected path + Path_DressupAxisMap @@ -3962,6 +3962,13 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a Path Hop object Creates a Path Hop object + + + The selected object is not a path + + The selected object is not a path + + Please select one path object @@ -3977,13 +3984,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Create Hop Create Hop - - - The selected object is not a path - - The selected object is not a path - - Path_Inspect @@ -4230,6 +4230,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_Sanity + + + The Job has no selected Base object. + The Job has no selected Base object. + Check the path job for common errors @@ -4310,11 +4315,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Minimum Z Height Minimum Z Height - - - The Job has no selected Base object. - The Job has no selected Base object. - Maximum Z Height @@ -4645,6 +4645,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Path_ToolController + + + Tool Number to Load + Tool Number to Load + Add Tool Controller to the Job @@ -4655,11 +4660,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Add Tool Controller Add Tool Controller - - - Tool Number to Load - Tool Number to Load - Path_ToolTable @@ -4686,6 +4686,11 @@ If it is necessary to set the FinalDepth manually please select a different oper Creates a medial line engraving path Creates a medial line engraving path + + + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle + VCarve requires an engraving cutter with CuttingEdgeAngle @@ -4696,11 +4701,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Engraver Cutting Edge Angle must be < 180 degrees. Engraver Cutting Edge Angle must be < 180 degrees. - - - VCarve requires an engraving cutter with CuttingEdgeAngle - VCarve requires an engraving cutter with CuttingEdgeAngle - Path_Waterline @@ -4735,11 +4735,56 @@ If it is necessary to set the FinalDepth manually please select a different oper Save toolbit library Save toolbit library + + + Tooltable JSON (*.json) + Tooltable JSON (*.json) + + + + HeeksCAD tooltable (*.tooltable) + HeeksCAD tooltable (*.tooltable) + + + + LinuxCNC tooltable (*.tbl) + LinuxCNC tooltable (*.tbl) + Open tooltable Open tooltable + + + Save tooltable + Save tooltable + + + + Rename Tooltable + Rename Tooltable + + + + Enter Name: + Enter Name: + + + + Add New Tool Table + Add New Tool Table + + + + Delete Selected Tool Table + Delete Selected Tool Table + + + + Rename Selected Tool Table + Rename Selected Tool Table + Tooltable editor @@ -4950,11 +4995,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) Tooltable XML (*.xml);;HeeksCAD tooltable (*.tooltable) - - - Save tooltable - Save tooltable - Tooltable XML (*.xml) @@ -4970,46 +5010,6 @@ If it is necessary to set the FinalDepth manually please select a different oper Object doesn't have a tooltable property Object doesn't have a tooltable property - - - Rename Tooltable - Rename Tooltable - - - - Enter Name: - Enter Name: - - - - Add New Tool Table - Add New Tool Table - - - - Delete Selected Tool Table - Delete Selected Tool Table - - - - Rename Selected Tool Table - Rename Selected Tool Table - - - - Tooltable JSON (*.json) - Tooltable JSON (*.json) - - - - HeeksCAD tooltable (*.tooltable) - HeeksCAD tooltable (*.tooltable) - - - - LinuxCNC tooltable (*.tbl) - LinuxCNC tooltable (*.tbl) - Tooltable XML (*.xml);;LinuxCNC tooltable (*.tbl) diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.qm b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.qm index 9af5d43845..3e3d22e4d2 100644 Binary files a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.qm and b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.qm differ diff --git a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.ts b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.ts index f276e481c3..6477b2ba33 100644 --- a/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.ts +++ b/src/Mod/Raytracing/Gui/Resources/translations/Raytracing_zh-CN.ts @@ -16,7 +16,7 @@ Export a Raytracing project to a file - 将追踪项目导出到文件 + 将光线追踪项目导出到文件 diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_pl.qm b/src/Mod/Robot/Gui/Resources/translations/Robot_pl.qm index 0a17a5f490..bdb5837c66 100644 Binary files a/src/Mod/Robot/Gui/Resources/translations/Robot_pl.qm and b/src/Mod/Robot/Gui/Resources/translations/Robot_pl.qm differ diff --git a/src/Mod/Robot/Gui/Resources/translations/Robot_pl.ts b/src/Mod/Robot/Gui/Resources/translations/Robot_pl.ts index 375d4f0648..c0131a3754 100644 --- a/src/Mod/Robot/Gui/Resources/translations/Robot_pl.ts +++ b/src/Mod/Robot/Gui/Resources/translations/Robot_pl.ts @@ -65,7 +65,7 @@ Edge to Trajectory... - Krawędź na tor ruchu... + Wstaw krawędź w tor ruchu ... @@ -191,7 +191,7 @@ Insert in trajectory - Wstaw w tor ruchu + Wstaw narzędzie w tor ruchu @@ -209,12 +209,12 @@ Insert in trajectory - Wstaw w tor ruchu + Wstaw narzędzie w tor ruchu Insert preselection position into trajectory (W) - Wstawić pozycję wyboru wstępnego do toru ruchu (W) + Wstaw pozycję wyboru wstępnego do toru ruchu @@ -228,7 +228,7 @@ Move to home - Przenieś do pozycji startowej + Przejdź do pozycji startowej diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm index afb97be5c0..f3e99de9af 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts index f877a61e41..8cb4d5fcbe 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_de.ts @@ -371,7 +371,7 @@ Sketch fillet - Skizzenverrundung + Verrundung @@ -389,12 +389,12 @@ Create rectangles - Create rectangles + Rechtecke erstellen Creates a rectangle in the sketch - Creates a rectangle in the sketch + Rechteck in der Skizze erstellen @@ -404,12 +404,12 @@ Centered rectangle - Centered rectangle + Zentriertes Rechteck Rounded rectangle - Rounded rectangle + Abgerundetes Rechteck @@ -422,7 +422,7 @@ Create regular polygon - Regelmäßiges Polygon erstellen + Regelmäßiges Vieleck erstellen @@ -1100,12 +1100,12 @@ with respect to a line or a third point Create ellipse by center - Erstellen einer Ellipse durch Angabe des Zentrums + Ellipse um Mittelpunkt erstellen Create an ellipse by center in the sketch - Erstellen einer Ellipse durch Angabe des Zentrums in der Skizze + Ellipse um Mittelpunkt in der Skizze erzeugen @@ -1190,12 +1190,12 @@ with respect to a line or a third point Create rounded rectangle - Create rounded rectangle + Abgerundetes Rechteck erstellen Create a rounded rectangle in the sketch - Create a rounded rectangle in the sketch + Ein abgerundetes Rechteck in der Skizze erstellen @@ -1244,12 +1244,12 @@ with respect to a line or a third point Create periodic B-spline - Erstellen von periodischer B-Spline + Geschlossenen B-Spline erstellen Create a periodic B-spline via control points in the sketch. - Erstellen periodischer B-Splines über Kontrollpunkte in der Skizze. + Erstellen eines geschlossenen B-Splines über Kontrollpunkte in der Skizze. @@ -1334,12 +1334,12 @@ with respect to a line or a third point Create centered rectangle - Create centered rectangle + Zentriertes Rechteck erstellen Create a centered rectangle in the sketch - Create a centered rectangle in the sketch + Ein zentriertes Rechteck in der Skizze erstellen @@ -1352,7 +1352,7 @@ with respect to a line or a third point Create regular polygon - Regelmäßiges Polygon erstellen + Regelmäßiges Vieleck erstellen @@ -1762,12 +1762,12 @@ als Spiegelreferenz verwendet werden. Remove axes alignment - Remove axes alignment + Achsenausrichtung entfernen Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection - Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection + Ändert Einschränkungen, um Achsenausrichtungen zu entfernen und versucht gleichzeitig, die Beziehungen zwischen den Einschränkungen der Auswahl zu erhalten @@ -2491,12 +2491,12 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen. Add centered sketch box - Add centered sketch box + Zentrierten Skizzenrahmen hinzufügen Add rounded rectangle - Add rounded rectangle + Abgerundetes Rechteck hinzufügen @@ -2649,7 +2649,7 @@ ungültigen Einschränkungen, degenerierten Geometrien, etc überprüfen. Remove Axes Alignment - Remove Axes Alignment + Achsenausrichtung entfernen @@ -3697,7 +3697,7 @@ Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpun None of the selected elements is a knot of a B-spline - Keines der ausgewählten Elemente ist ein Knoten einer B-Spline + Keines der ausgewählten Elemente ist ein Knoten eines B-Splines @@ -3781,7 +3781,7 @@ Akzeptierte Kombinationen: zwei Kurven; Ein Endpunkt und eine Kurve; Zwei Endpun Removal of axes alignment requires at least one selected non-external geometric element - Removal of axes alignment requires at least one selected non-external geometric element + Das Entfernen der Achsenausrichtung erfordert mindestens ein ausgewähltes nicht-externes geometrisches Element @@ -5595,7 +5595,7 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Create a B-spline by control points - B-Spline erzeugen - offene Form + Erzeugt einen B-Spline durch Kontrollpunkte @@ -5657,7 +5657,7 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Create a rounded rectangle - Create a rounded rectangle + Ein abgerundetes Rechteck erstellen @@ -5698,7 +5698,7 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Create a rectangle - Create a rectangle + Ein Rechteck erstellen @@ -5706,7 +5706,7 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Create a centered rectangle - Create a centered rectangle + Ein zentriertes Rechteck erstellen @@ -5732,13 +5732,13 @@ Punkte müssen näher als ein Fünftel der Rastergröße an eine Rasterlinie ges Periodic B-spline by control points - B-Spline erzeugen - geschlossenen Form + Geschlossener B-Spline durch Kontrollpunkte Create a periodic B-spline by control points - B-Spline erzeugen - geschlossene Form + Erzeugt einen geschlossenen B-Spline durch Kontrollpunkte diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm index ca00199373..0c907b0e7a 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts index dbe51bbefd..ee0675f471 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_es-ES.ts @@ -389,12 +389,12 @@ Create rectangles - Create rectangles + Crear rectángulos Creates a rectangle in the sketch - Creates a rectangle in the sketch + Crea un rectángulo en un boceto @@ -404,12 +404,12 @@ Centered rectangle - Centered rectangle + Rectángulo centrado Rounded rectangle - Rounded rectangle + Rectángulo redondeado @@ -1192,12 +1192,12 @@ con respecto a una línea o un tercer punto Create rounded rectangle - Create rounded rectangle + Crear rectángulo redondeado Create a rounded rectangle in the sketch - Create a rounded rectangle in the sketch + Crear un rectángulo redondeado en el boceto @@ -1336,12 +1336,12 @@ con respecto a una línea o un tercer punto Create centered rectangle - Create centered rectangle + Crear rectángulo centrado Create a centered rectangle in the sketch - Create a centered rectangle in the sketch + Crear un rectángulo centrado en es croquis @@ -1764,12 +1764,12 @@ como referencia replicadora. Remove axes alignment - Remove axes alignment + Remover alineación de ejes Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection - Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection + Modifica restricciones para remover la alineación de los ejes mientras se intenta preservar la relación de restricción de la selección @@ -2493,12 +2493,12 @@ restricciones inválidas, geometrías degeneradas, etc. Add centered sketch box - Add centered sketch box + Añadir cuadro de croquis centrado Add rounded rectangle - Add rounded rectangle + Añadir rectángulo redondeado @@ -2651,7 +2651,7 @@ restricciones inválidas, geometrías degeneradas, etc. Remove Axes Alignment - Remove Axes Alignment + Quitar alineación de ejes @@ -3782,7 +3782,7 @@ Combinaciones aceptadas: dos curvas; un extremo y una curva; dos extremos; dos c Removal of axes alignment requires at least one selected non-external geometric element - Removal of axes alignment requires at least one selected non-external geometric element + La eliminación de alineación de ejes requiere al menos un elemento geométrico no externo seleccionado @@ -5660,7 +5660,7 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Create a rounded rectangle - Create a rounded rectangle + Crear rectángulo redondeado @@ -5701,7 +5701,7 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Create a rectangle - Create a rectangle + Crear rectángulo @@ -5709,7 +5709,7 @@ Los puntos deben estar más cerca de una quinta parte del tamaño de la cuadríc Create a centered rectangle - Create a centered rectangle + Crear un rectángulo centrado diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm index 05e6869776..88db4d89ea 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts index d49245b770..6f4293b582 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_fr.ts @@ -389,12 +389,12 @@ Create rectangles - Create rectangles + Créer des rectangles Creates a rectangle in the sketch - Creates a rectangle in the sketch + Créer un rectangle dans l'esquisse @@ -404,12 +404,12 @@ Centered rectangle - Centered rectangle + Rectangle centré Rounded rectangle - Rounded rectangle + Rectangle arrondi @@ -1190,12 +1190,12 @@ with respect to a line or a third point Create rounded rectangle - Create rounded rectangle + Créer un rectangle arrondi Create a rounded rectangle in the sketch - Create a rounded rectangle in the sketch + Créer un rectangle arrondi dans l'esquisse @@ -1334,12 +1334,12 @@ with respect to a line or a third point Create centered rectangle - Create centered rectangle + Créer un rectangle centré Create a centered rectangle in the sketch - Create a centered rectangle in the sketch + Créer un rectangle centré dans l'esquisse @@ -1760,12 +1760,12 @@ as mirroring reference. Remove axes alignment - Remove axes alignment + Supprimer l'alignement des axes Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection - Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection + Modifie les contraintes pour supprimer l'alignement des axes en essayant de préserver la relation de contrainte de la sélection @@ -2489,12 +2489,12 @@ les contraintes invalides, les géométries dégénérées, etc. Add centered sketch box - Add centered sketch box + Ajouter une boîte d'esquisse centrée Add rounded rectangle - Add rounded rectangle + Ajouter un rectangle arrondi @@ -2647,7 +2647,7 @@ les contraintes invalides, les géométries dégénérées, etc. Remove Axes Alignment - Remove Axes Alignment + Supprime l'Alignement d'Axes @@ -3779,7 +3779,7 @@ Combinaisons acceptés : deux courbes ; un point d'extrémité et une courbe ; d Removal of axes alignment requires at least one selected non-external geometric element - Removal of axes alignment requires at least one selected non-external geometric element + La suppression de l'alignement des axes nécessite au moins un élément géométrique non externe sélectionné @@ -5655,7 +5655,7 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Create a rounded rectangle - Create a rounded rectangle + Créer un rectangle arrondi @@ -5696,7 +5696,7 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Create a rectangle - Create a rectangle + Créer un rectangle @@ -5704,7 +5704,7 @@ Les points doivent être placés à une distance de la ligne inférieure à 20% Create a centered rectangle - Create a centered rectangle + Créer un rectangle centré diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm index efc10caf9e..579f060ae2 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts index 770b898aa1..ad3026fdf1 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_it.ts @@ -213,7 +213,7 @@ Constrain auto radius/diameter - Constrain auto radius/diameter + Vincola raggio/diametro automatico @@ -389,12 +389,12 @@ Create rectangles - Create rectangles + Crea Rettangolo Creates a rectangle in the sketch - Creates a rectangle in the sketch + Crea un rettangolo nello schizzo @@ -404,12 +404,12 @@ Centered rectangle - Centered rectangle + Rettangolo centrato Rounded rectangle - Rounded rectangle + Rettangolo arrotondato @@ -775,12 +775,12 @@ sul vertice selezionato Constrain auto radius/diameter - Constrain auto radius/diameter + Vincola raggio/diametro automatico Fix automatically diameter on circle and radius on arc/pole - Fix automatically diameter on circle and radius on arc/pole + Fissa automaticamente il diametro sul cerchio e il raggio sull'arco @@ -1193,12 +1193,12 @@ rispetto a una linea o a un terzo punto Create rounded rectangle - Create rounded rectangle + Crea rettangolo arrotondato Create a rounded rectangle in the sketch - Create a rounded rectangle in the sketch + Crea un rettangolo arrotondato nello schizzo @@ -1337,12 +1337,12 @@ rispetto a una linea o a un terzo punto Create centered rectangle - Create centered rectangle + Crea rettangolo centrato Create a centered rectangle in the sketch - Create a centered rectangle in the sketch + Crea un rettangolo centrato nello schizzo @@ -1766,12 +1766,12 @@ come riferimento speculare. Remove axes alignment - Remove axes alignment + Rimuovi allineamento assi Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection - Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection + Modifica i vincoli per rimuovere l'allineamento degli assi cercando di preservare la relazione di vincolo della selezione @@ -2495,12 +2495,12 @@ vincoli non validi, geometria degenerata, ecc. Add centered sketch box - Add centered sketch box + Aggiungi schizzo rettangolare centrato Add rounded rectangle - Add rounded rectangle + Aggiungi rettangolo arrotondato @@ -2653,7 +2653,7 @@ vincoli non validi, geometria degenerata, ecc. Remove Axes Alignment - Remove Axes Alignment + Rimuovi Allineamento Assi @@ -3785,7 +3785,7 @@ Combinazioni ammesse: due curve; un punto finale e una curva; due punti finali; Removal of axes alignment requires at least one selected non-external geometric element - Removal of axes alignment requires at least one selected non-external geometric element + La rimozione dell'allineamento degli assi richiede almeno un elemento geometrico non esterno selezionato @@ -5506,7 +5506,7 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Fix the radius/diameter of a circle or an arc - Fix the radius/diameter of a circle or an arc + Fissare il diametro/raggio di un cerchio o di un arco @@ -5523,7 +5523,7 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Fix the radius/diameter of a circle or an arc - Fix the radius/diameter of a circle or an arc + Fissare il diametro/raggio di un cerchio o di un arco @@ -5662,7 +5662,7 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Create a rounded rectangle - Create a rounded rectangle + Crea un rettangolo arrotondato @@ -5703,7 +5703,7 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Create a rectangle - Create a rectangle + Crea un rettangolo @@ -5711,7 +5711,7 @@ I punti devono essere impostati più vicino di un quinto della dimensione della Create a centered rectangle - Create a centered rectangle + Crea un rettangolo centrato diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.qm index 1f34ffaaf3..51187de2e2 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts index 29e82fae0d..425330bdc0 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pl.ts @@ -389,12 +389,12 @@ Create rectangles - Create rectangles + Utwórz prostokąty Creates a rectangle in the sketch - Creates a rectangle in the sketch + Utwórz prostokąt na szkicu @@ -404,12 +404,12 @@ Centered rectangle - Centered rectangle + Prostokąt wyśrodkowany Rounded rectangle - Rounded rectangle + Zaokrąglenie prostokąta @@ -1193,12 +1193,12 @@ w odniesieniu do linii lub trzeciego punktu Create rounded rectangle - Create rounded rectangle + Utwórz zaokrąglenie prostokąta Create a rounded rectangle in the sketch - Create a rounded rectangle in the sketch + Utwórz zaokrąglony prostokąt na szkicu @@ -1337,12 +1337,12 @@ w odniesieniu do linii lub trzeciego punktu Create centered rectangle - Create centered rectangle + Utwórz wyśrodkowany prostokąt Create a centered rectangle in the sketch - Create a centered rectangle in the sketch + Utwórz wyśrodkowany prostokąt na szkicu @@ -1766,12 +1766,12 @@ jako odniesienia lustrzanego odbicia. Remove axes alignment - Remove axes alignment + Usuń wyrównanie osi Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection - Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection + Modyfikuje wiązania, aby usunąć wyrównanie osi, próbując jednocześnie zachować zależność wiązań dla zaznaczenia @@ -2495,12 +2495,12 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Add centered sketch box - Add centered sketch box + Dodaj wyśrodkowane pole szkicu Add rounded rectangle - Add rounded rectangle + Dodaj zaokrąglony prostokąt @@ -2653,7 +2653,7 @@ nieprawidłowych wiązań, zdegenerowanej geometrii itp. Remove Axes Alignment - Remove Axes Alignment + Usuń wyrównanie osi @@ -3785,7 +3785,7 @@ Akceptowane kombinacje: dwie krzywe; punkt końcowy i krzywa; dwa punkty końcow Removal of axes alignment requires at least one selected non-external geometric element - Removal of axes alignment requires at least one selected non-external geometric element + Usunięcie wyrównania osi wymaga wybrania co najmniej jednego niezewnętrznego elementu geometrycznego @@ -5508,7 +5508,7 @@ Punkty muszą być ustawione bliżej niż jedna piąta rozmiaru siatki od linii Fix the radius/diameter of a circle or an arc - Napraw promień / średnicę okręgu lub łuku + Określ promień / średnicę okręgu lub łuku @@ -5525,7 +5525,7 @@ Punkty muszą być ustawione bliżej niż jedna piąta rozmiaru siatki od linii Fix the radius/diameter of a circle or an arc - Napraw promień / średnicę okręgu lub łuku + Określ promień / średnicę okręgu lub łuku @@ -5664,7 +5664,7 @@ Punkty muszą być ustawione bliżej niż jedna piąta rozmiaru siatki od linii Create a rounded rectangle - Create a rounded rectangle + Utwórz zaokrąglony prostokąt @@ -5705,7 +5705,7 @@ Punkty muszą być ustawione bliżej niż jedna piąta rozmiaru siatki od linii Create a rectangle - Create a rectangle + Utwórz prostokąt @@ -5713,7 +5713,7 @@ Punkty muszą być ustawione bliżej niż jedna piąta rozmiaru siatki od linii Create a centered rectangle - Create a centered rectangle + Utwórz wyśrodkowany prostokąt diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.qm index d4f88ba9cb..6ca6710063 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts index 9ecf2adef7..dbae7c9c29 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_pt-PT.ts @@ -213,7 +213,7 @@ Constrain auto radius/diameter - Constrain auto radius/diameter + Restringir raio/diâmetro automático @@ -389,12 +389,12 @@ Create rectangles - Create rectangles + Criar retângulos Creates a rectangle in the sketch - Creates a rectangle in the sketch + Cria um retângulo no esboço @@ -404,12 +404,12 @@ Centered rectangle - Centered rectangle + Retângulo centrado Rounded rectangle - Rounded rectangle + Retângulo arredondado @@ -775,7 +775,7 @@ on the selected vertex Constrain auto radius/diameter - Constrain auto radius/diameter + Restringir raio/diâmetro automático @@ -1193,12 +1193,12 @@ with respect to a line or a third point Create rounded rectangle - Create rounded rectangle + Cria um retângulo arredondado Create a rounded rectangle in the sketch - Create a rounded rectangle in the sketch + Criar um retângulo arredondado no esboço @@ -1337,12 +1337,12 @@ with respect to a line or a third point Create centered rectangle - Create centered rectangle + Criar um retângulo centrado Create a centered rectangle in the sketch - Create a centered rectangle in the sketch + Criar um retângulo centrado no esboço @@ -1766,12 +1766,12 @@ as mirroring reference. Remove axes alignment - Remove axes alignment + Remover alinhamento dos eixos Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection - Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection + Modifica as restrições para remover o alinhamento de eixos ao tentar preservar a relação de restrições da seleção @@ -2500,7 +2500,7 @@ invalid constraints, degenerated geometry, etc. Add rounded rectangle - Add rounded rectangle + Adicionar retângulo arredondado @@ -2653,7 +2653,7 @@ invalid constraints, degenerated geometry, etc. Remove Axes Alignment - Remove Axes Alignment + Remover Alinhamento dos Eixos @@ -3785,7 +3785,7 @@ Combinações possíveis: duas curvas; um ponto de extremidade e uma curva; dois Removal of axes alignment requires at least one selected non-external geometric element - Removal of axes alignment requires at least one selected non-external geometric element + Remoção do alinhamento de eixos requer pelo menos que um elemento geométrico não-externo seja selecionado @@ -5666,7 +5666,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Create a rounded rectangle - Create a rounded rectangle + Criar um retângulo arredondado @@ -5707,7 +5707,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Create a rectangle - Create a rectangle + Criar um retângulo @@ -5715,7 +5715,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Create a centered rectangle - Create a centered rectangle + Criar um retângulo centrado diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.qm index 6d6d0b8e94..0ad4ef3936 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts index b09111e398..83212cbdd4 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ro.ts @@ -389,12 +389,12 @@ Create rectangles - Create rectangles + Crează dreptunghiuri Creates a rectangle in the sketch - Creates a rectangle in the sketch + Crează un dreptunghi în schiţă @@ -404,12 +404,12 @@ Centered rectangle - Centered rectangle + Dreptunghi centrat Rounded rectangle - Rounded rectangle + Dreptunghi rotunjit @@ -1193,12 +1193,12 @@ with respect to a line or a third point Create rounded rectangle - Create rounded rectangle + Crează dreptunghi rotunjit Create a rounded rectangle in the sketch - Create a rounded rectangle in the sketch + Creați un dreptunghi rotunjit în schiță @@ -1337,12 +1337,12 @@ with respect to a line or a third point Create centered rectangle - Create centered rectangle + Crează dreptunghi centrat Create a centered rectangle in the sketch - Create a centered rectangle in the sketch + Creați un dreptunghi centrat în schiță @@ -1766,12 +1766,12 @@ as mirroring reference. Remove axes alignment - Remove axes alignment + Elimină alinierea axelor Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection - Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection + Modifică constrângerile pentru a elimina alinierea axelor încercând în același timp să păstreze relația de constrângere a selecției @@ -2495,12 +2495,12 @@ invalid constraints, degenerated geometry, etc. Add centered sketch box - Add centered sketch box + Adăugă o căsuță de schiță centrată Add rounded rectangle - Add rounded rectangle + Adaugă un dreptunghi rotunjit @@ -2653,7 +2653,7 @@ invalid constraints, degenerated geometry, etc. Remove Axes Alignment - Remove Axes Alignment + Elimină Alinierea Axelor @@ -3782,7 +3782,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Removal of axes alignment requires at least one selected non-external geometric element - Removal of axes alignment requires at least one selected non-external geometric element + Îndepărtarea alinierii axelor necesită cel puțin un element geometric intern selectat @@ -5661,7 +5661,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Create a rounded rectangle - Create a rounded rectangle + Creează un dreptunghi rotunjit @@ -5702,7 +5702,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Create a rectangle - Create a rectangle + Creează un dreptunghi @@ -5710,7 +5710,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Create a centered rectangle - Create a centered rectangle + Creaţi un dreptunghi centrat diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm index c6e16ee623..71830e29b5 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts index dbf64ad37d..c9ee3be18b 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_ru.ts @@ -389,12 +389,12 @@ Create rectangles - Create rectangles + Создать прямоугольники Creates a rectangle in the sketch - Creates a rectangle in the sketch + Создаёт прямоугольник на эскизе @@ -404,12 +404,12 @@ Centered rectangle - Centered rectangle + Прямоугольник по центру Rounded rectangle - Rounded rectangle + Скругленный прямоугольник @@ -1192,12 +1192,12 @@ with respect to a line or a third point Create rounded rectangle - Create rounded rectangle + Создать скругленный прямоугольник Create a rounded rectangle in the sketch - Create a rounded rectangle in the sketch + Создать скругленный прямоугольник в эскизе @@ -1336,12 +1336,12 @@ with respect to a line or a third point Create centered rectangle - Create centered rectangle + Создать прямоугольник по центру Create a centered rectangle in the sketch - Create a centered rectangle in the sketch + Создать прямоугольник по центру в эскизе @@ -1763,12 +1763,12 @@ as mirroring reference. Remove axes alignment - Remove axes alignment + Удалить выравнивание осей Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection - Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection + Изменяет ограничения, чтобы удалить выравнивание осей, пытаясь сохранить взаимосвязь ограничения выделения. @@ -2492,12 +2492,12 @@ invalid constraints, degenerated geometry, etc. Add centered sketch box - Add centered sketch box + Добавить блок по центру эскиза Add rounded rectangle - Add rounded rectangle + Добавить скругленный прямоугольник @@ -2650,7 +2650,7 @@ invalid constraints, degenerated geometry, etc. Remove Axes Alignment - Remove Axes Alignment + Удалить выравнивание осей @@ -3780,7 +3780,7 @@ Accepted combinations: two curves; an endpoint and a curve; two endpoints; two c Removal of axes alignment requires at least one selected non-external geometric element - Removal of axes alignment requires at least one selected non-external geometric element + Для удаления выравнивания осей требуется выбрать по крайней мере один не-внешний геометрический элемент @@ -4652,8 +4652,8 @@ Works only when "Restore camera position after editing" is enabled. Open a by default sketch in Section View mode. Then objects are only visible behind the sketch plane. - Open a by default sketch in Section View mode. -Then objects are only visible behind the sketch plane. + Открывает по умолчанию эскиз в режиме просмотра сечения. +Тогда объекты видны только за плоскостью эскиза. @@ -5658,7 +5658,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Create a rounded rectangle - Create a rounded rectangle + Создать скругленный прямоугольник @@ -5699,7 +5699,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Create a rectangle - Create a rectangle + Создать прямоугольник @@ -5707,7 +5707,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Create a centered rectangle - Create a centered rectangle + Создать прямоугольник по центру diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.qm index d4f2f5de36..144a2fbdde 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts index fdfc72fd71..a83c569d1b 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_sl.ts @@ -389,12 +389,12 @@ Create rectangles - Create rectangles + Ustvari pravokotnike Creates a rectangle in the sketch - Creates a rectangle in the sketch + V očrtu naredi pravokotnik @@ -404,12 +404,12 @@ Centered rectangle - Centered rectangle + Usredinjen pravokotnik Rounded rectangle - Rounded rectangle + Zaobljen pravokotnik @@ -1192,12 +1192,12 @@ glede na črto ali tretjo točko Create rounded rectangle - Create rounded rectangle + Ustvari zaobljen pravokotnik Create a rounded rectangle in the sketch - Create a rounded rectangle in the sketch + V očrtu naredi zaobljen pravokotnik @@ -1336,12 +1336,12 @@ glede na črto ali tretjo točko Create centered rectangle - Create centered rectangle + Ustvari usredinjen pravokotnik Create a centered rectangle in the sketch - Create a centered rectangle in the sketch + V očrtu naredi usredinjen pravokotnik @@ -1764,12 +1764,12 @@ preko X ali Y osi, oz. preko izhodiščne točke. Remove axes alignment - Remove axes alignment + Ukini poravnavo z osmi Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection - Modifies constraints to remove axes alignment while trying to preserve the constraint relationship of the selection + Spremeni omejila tako, da ukine poravnavanje z osmi, hkrati pa skuša ohraniti odnose omejil izbranih predmetov @@ -2493,12 +2493,12 @@ neveljavna omejila, izrojene geometrije, ... Add centered sketch box - Add centered sketch box + Dodaj usredinjen očrtni kvader Add rounded rectangle - Add rounded rectangle + Dodaj zaobljen pravokotnik @@ -2651,7 +2651,7 @@ neveljavna omejila, izrojene geometrije, ... Remove Axes Alignment - Remove Axes Alignment + Ukini poravnavo z osmi @@ -3758,7 +3758,7 @@ Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni to A copy requires at least one selected non-external geometric element - Kopija zahteva izbrano vsaj eno nezunanjo geometrijsko prvino + Za kopijo mora biti izbrana vsaj ena nezunanja geometrijska prvina @@ -3783,7 +3783,7 @@ Dovoljene kombinacije: dve krivulji, končna točka in krivulja, dve končni to Removal of axes alignment requires at least one selected non-external geometric element - Removal of axes alignment requires at least one selected non-external geometric element + Za ukinitev poravnave z osmi mora biti izbrana vsaj ena nezunanja geometrijska prvina @@ -5661,7 +5661,7 @@ Da bi se pripele, morajo biti točke oddaljene od črte do eno petino polja mre Create a rounded rectangle - Create a rounded rectangle + Ustvari zaobljen pravokotnik @@ -5702,7 +5702,7 @@ Da bi se pripele, morajo biti točke oddaljene od črte do eno petino polja mre Create a rectangle - Create a rectangle + Ustvari pravokotnik @@ -5710,7 +5710,7 @@ Da bi se pripele, morajo biti točke oddaljene od črte do eno petino polja mre Create a centered rectangle - Create a centered rectangle + Ustvari usredinjen pravokotnik diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.qm index e238645525..264f3927e1 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts index b644cb2d3d..1029fc45b0 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_uk.ts @@ -394,7 +394,7 @@ Creates a rectangle in the sketch - Creates a rectangle in the sketch + Створити в ескізі прямокутник @@ -409,7 +409,7 @@ Rounded rectangle - Rounded rectangle + Прямокутник з заокругленими кутами @@ -1193,12 +1193,12 @@ with respect to a line or a third point Create rounded rectangle - Create rounded rectangle + Створити прямокутник з заокругленими кутами Create a rounded rectangle in the sketch - Create a rounded rectangle in the sketch + Створити в ескізі прямокутник з заокругленими кутами @@ -2500,7 +2500,7 @@ invalid constraints, degenerated geometry, etc. Add rounded rectangle - Add rounded rectangle + Додати прямокутник з заокругленими кутами @@ -5666,7 +5666,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Create a rounded rectangle - Create a rounded rectangle + Створити прямокутник з заокругленими кутами @@ -5707,7 +5707,7 @@ Points must be set closer than a fifth of the grid size to a grid line to snap.< Create a rectangle - Create a rectangle + Створити прямокутник diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.qm b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.qm index 9126f1a3e5..c9e6b631df 100644 Binary files a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.qm and b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.qm differ diff --git a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts index 9d7e608d38..e5d6ad7d19 100644 --- a/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts +++ b/src/Mod/Sketcher/Gui/Resources/translations/Sketcher_zh-CN.ts @@ -11,7 +11,7 @@ Show/hide B-spline curvature comb - Show/hide B-spline curvature comb + 显示/隐藏 B-样条曲率梳形图 @@ -29,7 +29,7 @@ Show/hide B-spline degree - Show/hide B-spline degree + 显示/隐藏 B-样条角度数 @@ -47,7 +47,7 @@ Show/hide B-spline knot multiplicity - Show/hide B-spline knot multiplicity + 显示/隐藏 B-样条节点多重性 @@ -83,7 +83,7 @@ Show/hide B-spline control polygon - Show/hide B-spline control polygon + 显示/隐藏 B-样条控制多边形 @@ -142,7 +142,7 @@ Produce a closed shape by tying the end point of one element with the next element's starting point - Produce a closed shape by tying the end point of one element with the next element's starting point + 通过将一个元素的终点与下一个元素的起点连接来生成一个闭合的形状 @@ -160,22 +160,22 @@ Show/hide B-spline degree - Show/hide B-spline degree + 显示/隐藏 B-样条角度数 Show/hide B-spline control polygon - Show/hide B-spline control polygon + 显示/隐藏 B-样条控制多边形 Show/hide B-spline curvature comb - Show/hide B-spline curvature comb + 显示/隐藏 B-样条曲率梳形图 Show/hide B-spline knot multiplicity - Show/hide B-spline knot multiplicity + 显示/隐藏 B-样条节点多重性 @@ -333,7 +333,7 @@ Ellipse by periapsis, apoapsis, minor radius - Ellipse by periapsis, apoapsis, minor radius + 通过近拱点，远拱点和短半径创建椭圆 @@ -361,17 +361,17 @@ Fillets - Fillets + 圆角 Create a fillet between two lines - Create a fillet between two lines + 在两条线间创建圆角。 Sketch fillet - Sketch fillet + 草图圆角 @@ -389,12 +389,12 @@ Create rectangles - Create rectangles + 创建矩形 Creates a rectangle in the sketch - Creates a rectangle in the sketch + 在草图中创建矩形 @@ -404,7 +404,7 @@ Centered rectangle - Centered rectangle + 中心矩形 @@ -539,7 +539,7 @@ Constrain block - Constrain block + 约束块 diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.qm index 24f015dfd3..9d40997be8 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts index b1fa6951fe..e331b8afa0 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_cs.ts @@ -570,7 +570,7 @@ Spreadsheet.alias_nazev místo Spreadsheet.B1 Insert %n row(s) above - Vložit %n řádek(ů) nad + Vložit %n řádek(ků) nad Insert %n row(s) above Insert %n row(s) above Insert %n row(s) above @@ -579,7 +579,7 @@ Spreadsheet.alias_nazev místo Spreadsheet.B1 Insert %n row(s) below - Vložit %n řádků pod + Vložit %n řádek(ků) pod Insert %n row(s) below Insert %n row(s) below Insert %n row(s) below diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-PT.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-PT.qm index e29bc95eef..7fa382e6cc 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-PT.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-PT.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-PT.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-PT.ts index dc3e09f2d9..6482366748 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-PT.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_pt-PT.ts @@ -570,21 +570,21 @@ Spreadsheet.my_alias_name em vez de Spreadsheet.B1 Insert %n row(s) above - Insert %n row(s) above + Inserir %n linha(s) acima Insert %n row(s) above Insert %n row(s) below - Insert %n row(s) below + Inserir %n linha(s) abaixo Insert %n row(s) below Insert %n non-contiguous rows - Insert %n non-contiguous rows + Inserir %n linhas não contíguas Insert %n non-contiguous rows @@ -598,21 +598,21 @@ Spreadsheet.my_alias_name em vez de Spreadsheet.B1 Insert %n column(s) left - Insert %n column(s) left + Inserir %n coluna(s) à esquerda Insert %n column(s) left Insert %n column(s) right - Insert %n column(s) right + Inserir %n coluna(s) à direita Insert %n column(s) right Insert %n non-contiguous columns - Insert %n non-contiguous columns + Inserir %n colunas não contíguas Insert %n non-contiguous columns diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sv-SE.qm b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sv-SE.qm index ae928b4a70..3a007b94fa 100644 Binary files a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sv-SE.qm and b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sv-SE.qm differ diff --git a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sv-SE.ts b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sv-SE.ts index bd6a80180e..c207d8588f 100644 --- a/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sv-SE.ts +++ b/src/Mod/Spreadsheet/Gui/Resources/translations/Spreadsheet_sv-SE.ts @@ -618,9 +618,9 @@ Spreadsheet.my_alias_name, istället för Spreadsheet.B1 Remove column(s) - - Remove column(s) - Remove column(s) + + Ta bort kolumn + Ta bort kolumner diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_pt-PT.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_pt-PT.qm index bbea6e3158..e89c5459f7 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_pt-PT.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_pt-PT.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_pt-PT.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_pt-PT.ts index 8e2b89f566..4eef2c28cf 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_pt-PT.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_pt-PT.ts @@ -291,8 +291,8 @@ An optional custom folder to be displayed at the bottom of the first page. By using ";;" to separate paths, you can add several folders here - An optional custom folder to be displayed at the bottom of the first page. -By using ";;" to separate paths, you can add several folders here + Uma pasta personalizada opcional a ser exibida na parte inferior da primeira página. +Usando ";;" para separar caminhos, podem ser adicionadas várias pastas aqui @@ -302,17 +302,17 @@ By using ";;" to separate paths, you can add several folders here Shows a notepad next to the file thumbnails, where you can keep notes across sessions - Shows a notepad next to the file thumbnails, where you can keep notes across sessions + Mostra um bloco de notas junto às miniaturas de ficheiro, onde pode manter notas entre sessões Show tips - Show tips + Mostrar dicas Displays help tips in the Start workbench Documents tab - Displays help tips in the Start workbench Documents tab + Exibe dicas de ajuda no separador Documentos da bancada Iniciar @@ -362,7 +362,7 @@ By using ";;" to separate paths, you can add several folders here If this is checked and a style sheet is specified in General preferences, it will be used and override the colors below - If this is checked and a style sheet is specified in General preferences, it will be used and override the colors below + Se marcado e se uma folha de estilo for especificada nas preferências gerais, esta será usada e substituirá as cores abaixo @@ -457,7 +457,7 @@ By using ";;" to separate paths, you can add several folders here If this is selected, the 'New File' icon shows a gradient icon instead of the normal icon - If this is selected, the 'New File' icon shows a gradient icon instead of the normal icon + Se selecionado, o ícone 'Novo Ficheiro' mostra um ícone com gradiente em vez do ícone normal @@ -467,12 +467,12 @@ By using ";;" to separate paths, you can add several folders here Choose which workbench to switch to after the program launches - Choose which workbench to switch to after the program launches + Escolha qual bancada abrir depois do programa iniciar If checked, will automatically close the Start page when FreeCAD launches - If checked, will automatically close the Start page when FreeCAD launches + Se marcado, fechará automaticamente a página inicial quando o FreeCAD iniciar @@ -492,7 +492,7 @@ By using ";;" to separate paths, you can add several folders here If application is started by opening a file, apply the two settings above - If application is started by opening a file, apply the two settings above + Se a aplicação é iniciada abrindo um ficheiro, aplicar as duas configurações acima diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_sl.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_sl.qm index 94dcf9bc92..ae85db013c 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_sl.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_sl.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_sl.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_sl.ts index 88950ca0e3..374733c8d0 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_sl.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_sl.ts @@ -312,7 +312,7 @@ Z ločevanjem poti z znaki ";;", lahko dodate več map Displays help tips in the Start workbench Documents tab - Displays help tips in the Start workbench Documents tab + Prikaže nasvete v zavihku Dokumenti, znotraj Začetnega okna diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_sv-SE.qm b/src/Mod/Start/Gui/Resources/translations/StartPage_sv-SE.qm index 94b953d4ac..5bd0f8970d 100644 Binary files a/src/Mod/Start/Gui/Resources/translations/StartPage_sv-SE.qm and b/src/Mod/Start/Gui/Resources/translations/StartPage_sv-SE.qm differ diff --git a/src/Mod/Start/Gui/Resources/translations/StartPage_sv-SE.ts b/src/Mod/Start/Gui/Resources/translations/StartPage_sv-SE.ts index ba479ee21f..37609499e5 100644 --- a/src/Mod/Start/Gui/Resources/translations/StartPage_sv-SE.ts +++ b/src/Mod/Start/Gui/Resources/translations/StartPage_sv-SE.ts @@ -307,7 +307,7 @@ By using ";;" to separate paths, you can add several folders here Show tips - Show tips + Visa tips diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.qm index 8bf701fb36..d1c4bcf0b9 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts index fb397ceda1..93914f38b0 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_cs.ts @@ -1133,7 +1133,7 @@ Standard - Standard + Standardní diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm index e02bad863f..61c2a01700 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts index e975f17eba..92d0df9758 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pl.ts @@ -1257,7 +1257,7 @@ Select exactly one Clip group. - Wybierz dokładnie jedną grupę klipu(grupa widokowa). + Wybierz dokładnie jedną grupę wycinków. @@ -1302,12 +1302,12 @@ Please select only 1 Arch Section. - Proszę wybrać tylko 1 przekrój/sekcję Arch (z BIM modułu) + Proszę wybrać tylko 1 przekrój środowiska Architektura. No Arch Sections in selection. - Brak przekrojów BIM (z Arch Workbench) wybranych. + Brak przekrojów środowiska Architektura w zaznaczeniu. @@ -1414,12 +1414,12 @@ Select 2 point objects and 1 View. (1) - Wybierz 2 punkty obiektów i 1 widok. (1) + Wybierz 2 obiekty punktów i 1 widok. (1) Select 2 point objects and 1 View. (2) - Wybierz 2 punkty obiektów i 1 widok. (2) + Wybierz 2 obiekty punktów i 1 widok. (2) @@ -4886,17 +4886,17 @@ przy użyciu podanego odstępu X/Y Looking down - Widok w dół + Patrząc w dół Looking right - Widok w prawo + Patrząc w prawo Looking left - Widok w lewo + Patrząc w lewo diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.qm b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.qm index c38e804536..903f0242c5 100644 Binary files a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.qm and b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.qm differ diff --git a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts index c398b151de..cf5f606970 100644 --- a/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts +++ b/src/Mod/TechDraw/Gui/Resources/translations/TechDraw_pt-PT.ts @@ -346,7 +346,7 @@ Save Dxf File - Save Dxf File + Gravar Ficheiro Dxf @@ -1998,7 +1998,7 @@ it has a tile weld that would become broken. Border - Border + Margem @@ -2156,7 +2156,7 @@ at the kink in the leader line Field Weld - Field Weld + Soldadura em Obra @@ -2231,7 +2231,7 @@ Only change unless you know what you are doing! Round - Round + Redondo @@ -2265,7 +2265,7 @@ Then you need to increase the tile limit. Include 2D Objects in projection - Include 2D Objects in projection + Incluir Objetos 2D na projeção @@ -2353,7 +2353,7 @@ can be a performance penalty in complex models. Dimension Format - Dimension Format + Formato da Dimensão @@ -2579,7 +2579,7 @@ Each unit is approx. 0.1 mm wide Show arc center marks in views - Show arc center marks in views + Exibir marcas de centro do arco nas vistas @@ -2962,12 +2962,12 @@ Multiplier of 'Font Size' Drawing Update - Drawing Update + Atualização do Desenho Whether or not pages are updated every time the 3D model is changed - Whether or not pages are updated every time the 3D model is changed + Se as páginas são atualizadas ou não sempre que o modelo 3D é alterado @@ -3025,22 +3025,22 @@ for ProjectionGroups Label Font* - Label Font* + Tipo de letra do rótulo* Label Size - Label Size + Tamanho do Rótulo Font for labels - Font for labels + Fonte para rótulos Label size - Label size + Tamanho do rótulo @@ -3075,7 +3075,7 @@ for ProjectionGroups Hidden Line Style - Hidden Line Style + Estilo de Linha Oculta @@ -3183,12 +3183,12 @@ for ProjectionGroups HLR - HLR + RLO Hidden Line Removal - Hidden Line Removal + Remoção de linha oculta @@ -3308,7 +3308,7 @@ Fast, but result is a collection of short straight lines. Default scale for new pages - Default scale for new pages + Escala padrão para novas páginas @@ -3318,7 +3318,7 @@ Fast, but result is a collection of short straight lines. Default scale for new views - Default scale for new views + Escala padrão para novas vistas @@ -3348,7 +3348,7 @@ Fast, but result is a collection of short straight lines. Size Adjustments - Size Adjustments + Ajustes de Tamanho @@ -3358,7 +3358,7 @@ Fast, but result is a collection of short straight lines. Vertex Scale - Vertex Scale + Escala dos Vértices @@ -3458,7 +3458,7 @@ Do you want to continue? Save Dxf File - Save Dxf File + Gravar Ficheiro Dxf @@ -3589,32 +3589,32 @@ Do you want to continue? End Symbol: - End Symbol: + Símbolo Final: End symbol for the balloon line - End symbol for the balloon line + Símbolo final para a linha de balão End Symbol Scale: - End Symbol Scale: + Escala de Símbolo Final: End symbol scale factor - End symbol scale factor + Fator de escala do símbolo final Line Visible: - Line Visible: + Linha Visível: Whether the leader line is visible or not - Whether the leader line is visible or not + Se a linha de chamada está visível ou não @@ -4310,7 +4310,7 @@ be used instead if the dimension value Start Symbol - Start Symbol + Símbolo Inicial @@ -4340,7 +4340,7 @@ be used instead if the dimension value End Symbol - End Symbol + Símbolo Final @@ -5120,7 +5120,7 @@ using the given X/Y Spacing TechDraw Views - TechDraw Views + Vistas TechDraw @@ -5130,22 +5130,22 @@ using the given X/Y Spacing TechDraw Dimensions - TechDraw Dimensions + Dimensões TechDraw TechDraw File Access - TechDraw File Access + Acesso Ficheiro TechDraw TechDraw Decoration - TechDraw Decoration + Decoração TechDraw TechDraw Annotation - TechDraw Annotation + Anotação TechDraw